1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
|
// SPDX-License-Identifier: GPL-2.0
/*
* pcm3724.c
* Comedi driver for Advantech PCM-3724 Digital I/O board
*
* Drew Csillag <drew_csillag@yahoo.com>
*/
/*
* Driver: pcm3724
* Description: Advantech PCM-3724
* Devices: [Advantech] PCM-3724 (pcm3724)
* Author: Drew Csillag <drew_csillag@yahoo.com>
* Status: tested
*
* This is driver for digital I/O boards PCM-3724 with 48 DIO.
* It needs 8255.o for operations and only immediate mode is supported.
* See the source for configuration details.
*
* Copy/pasted/hacked from pcm724.c
*
* Configuration Options:
* [0] - I/O port base address
*/
#include <linux/module.h>
#include "../comedidev.h"
#include "8255.h"
/*
* Register I/O Map
*
* This board has two standard 8255 devices that provide six 8-bit DIO ports
* (48 channels total). Six 74HCT245 chips (one for each port) buffer the
* I/O lines to increase driving capability. Because the 74HCT245 is a
* bidirectional, tri-state line buffer, two additional I/O ports are used
* to control the direction of data and the enable of each port.
*/
#define PCM3724_8255_0_BASE 0x00
#define PCM3724_8255_1_BASE 0x04
#define PCM3724_DIO_DIR_REG 0x08
#define PCM3724_DIO_DIR_C0_OUT BIT(0)
#define PCM3724_DIO_DIR_B0_OUT BIT(1)
#define PCM3724_DIO_DIR_A0_OUT BIT(2)
#define PCM3724_DIO_DIR_C1_OUT BIT(3)
#define PCM3724_DIO_DIR_B1_OUT BIT(4)
#define PCM3724_DIO_DIR_A1_OUT BIT(5)
#define PCM3724_GATE_CTRL_REG 0x09
#define PCM3724_GATE_CTRL_C0_ENA BIT(0)
#define PCM3724_GATE_CTRL_B0_ENA BIT(1)
#define PCM3724_GATE_CTRL_A0_ENA BIT(2)
#define PCM3724_GATE_CTRL_C1_ENA BIT(3)
#define PCM3724_GATE_CTRL_B1_ENA BIT(4)
#define PCM3724_GATE_CTRL_A1_ENA BIT(5)
/* used to track configured dios */
struct priv_pcm3724 {
int dio_1;
int dio_2;
};
static int compute_buffer(int config, int devno, struct comedi_subdevice *s)
{
/* 1 in io_bits indicates output */
if (s->io_bits & 0x0000ff) {
if (devno == 0)
config |= PCM3724_DIO_DIR_A0_OUT;
else
config |= PCM3724_DIO_DIR_A1_OUT;
}
if (s->io_bits & 0x00ff00) {
if (devno == 0)
config |= PCM3724_DIO_DIR_B0_OUT;
else
config |= PCM3724_DIO_DIR_B1_OUT;
}
if (s->io_bits & 0xff0000) {
if (devno == 0)
config |= PCM3724_DIO_DIR_C0_OUT;
else
config |= PCM3724_DIO_DIR_C1_OUT;
}
return config;
}
static void do_3724_config(struct comedi_device *dev,
struct comedi_subdevice *s, int chanspec)
{
struct comedi_subdevice *s_dio1 = &dev->subdevices[0];
struct comedi_subdevice *s_dio2 = &dev->subdevices[1];
int config;
int buffer_config;
unsigned long port_8255_cfg;
config = I8255_CTRL_CW;
buffer_config = 0;
/* 1 in io_bits indicates output, 1 in config indicates input */
if (!(s->io_bits & 0x0000ff))
config |= I8255_CTRL_A_IO;
if (!(s->io_bits & 0x00ff00))
config |= I8255_CTRL_B_IO;
if (!(s->io_bits & 0xff0000))
config |= I8255_CTRL_C_HI_IO | I8255_CTRL_C_LO_IO;
buffer_config = compute_buffer(0, 0, s_dio1);
buffer_config = compute_buffer(buffer_config, 1, s_dio2);
if (s == s_dio1)
port_8255_cfg = dev->iobase + I8255_CTRL_REG;
else
port_8255_cfg = dev->iobase + I8255_SIZE + I8255_CTRL_REG;
outb(buffer_config, dev->iobase + PCM3724_DIO_DIR_REG);
outb(config, port_8255_cfg);
}
static void enable_chan(struct comedi_device *dev, struct comedi_subdevice *s,
int chanspec)
{
struct priv_pcm3724 *priv = dev->private;
struct comedi_subdevice *s_dio1 = &dev->subdevices[0];
unsigned int mask;
int gatecfg;
gatecfg = 0;
mask = 1 << CR_CHAN(chanspec);
if (s == s_dio1)
priv->dio_1 |= mask;
else
priv->dio_2 |= mask;
if (priv->dio_1 & 0xff0000)
gatecfg |= PCM3724_GATE_CTRL_C0_ENA;
if (priv->dio_1 & 0xff00)
gatecfg |= PCM3724_GATE_CTRL_B0_ENA;
if (priv->dio_1 & 0xff)
gatecfg |= PCM3724_GATE_CTRL_A0_ENA;
if (priv->dio_2 & 0xff0000)
gatecfg |= PCM3724_GATE_CTRL_C1_ENA;
if (priv->dio_2 & 0xff00)
gatecfg |= PCM3724_GATE_CTRL_B1_ENA;
if (priv->dio_2 & 0xff)
gatecfg |= PCM3724_GATE_CTRL_A1_ENA;
outb(gatecfg, dev->iobase + PCM3724_GATE_CTRL_REG);
}
/* overriding the 8255 insn config */
static int subdev_3724_insn_config(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data)
{
unsigned int chan = CR_CHAN(insn->chanspec);
unsigned int mask;
int ret;
if (chan < 8)
mask = 0x0000ff;
else if (chan < 16)
mask = 0x00ff00;
else if (chan < 20)
mask = 0x0f0000;
else
mask = 0xf00000;
ret = comedi_dio_insn_config(dev, s, insn, data, mask);
if (ret)
return ret;
do_3724_config(dev, s, insn->chanspec);
enable_chan(dev, s, insn->chanspec);
return insn->n;
}
static int pcm3724_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
struct priv_pcm3724 *priv;
struct comedi_subdevice *s;
int ret, i;
priv = comedi_alloc_devpriv(dev, sizeof(*priv));
if (!priv)
return -ENOMEM;
ret = comedi_request_region(dev, it->options[0], 0x10);
if (ret)
return ret;
ret = comedi_alloc_subdevices(dev, 2);
if (ret)
return ret;
for (i = 0; i < dev->n_subdevices; i++) {
s = &dev->subdevices[i];
ret = subdev_8255_init(dev, s, NULL, i * I8255_SIZE);
if (ret)
return ret;
s->insn_config = subdev_3724_insn_config;
}
return 0;
}
static struct comedi_driver pcm3724_driver = {
.driver_name = "pcm3724",
.module = THIS_MODULE,
.attach = pcm3724_attach,
.detach = comedi_legacy_detach,
};
module_comedi_driver(pcm3724_driver);
MODULE_AUTHOR("Comedi https://www.comedi.org");
MODULE_DESCRIPTION("Comedi driver for Advantech PCM-3724 Digital I/O board");
MODULE_LICENSE("GPL");
|
