summaryrefslogtreecommitdiffstats
path: root/sys/dev/isa/files.isa (follow)
Commit message (Collapse)AuthorAgeFilesLines
* dmesg@ says pss has never been seen in the wild and the manpage says ittedu2011-06-291-10/+1
| | | | doesn't work. goodbye. ok miod
* Remove the ega driver which is not referenced by any GENERIC kernel.matthieu2011-06-281-6/+1
| | | | | ok tedu@, "I won't mourn it" miod@, "no objection" oga@, "I won't cry" todd@, "fine, even happy" nick@
* kill mcd dead. ok krw matthew millert thibtedu2011-06-261-7/+2
|
* I see you hiding, scdtedu2011-06-261-2/+2
|
* remove the ``midisyn'' framework and anything using it, i.e., the oplratchov2010-07-311-13/+1
| | | | device and the midi interface to pcppi.
* Driver for microguru sensor microcontroller found on ABIT motherboards.deraadt2010-03-281-1/+6
| | | | Driver written by Mikko Tolmunen <oskari@sefirosu.org>
* Add schsio(4), a driver for SMSC SCH311x LPC Super I/O ICs providingmk2009-01-231-1/+6
| | | | | | | | | | | | environment sensors. These are found at least on VIA Epia SN18000G boards. Not enabled at 0x162e and 0x164e because probing these may not be safe according to kettenis (guess where my schsio is). Much help from kettenis. Input from const and fgs. ok kettenis
* Remove driver for pre 802.11 RangeLAN2 wireless devices.jsg2008-04-231-5/+1
| | | | | | | | It doesn't compile, was never finished, is now irrelevant, and miod has taken it apon himself to scare good boys and girls by suggesting they read the code. ok dlg@
* fix comment for it(4)form2008-04-051-2/+2
|
* Driver for Fintek F71805F LPC sensor based on lm78 driver code;deraadt2008-03-191-1/+6
| | | | written by Geoff Steckel
* Enter wbsio(4), a driver for the Winbond LPC Super I/O chips.kettenis2008-02-171-2/+8
| | | | ok henning@
* New it(4) driver.form2007-12-181-2/+3
| | | | | Supports ITE IT8705/8712/8716/8718/8726 and SiS SiS950 hardware monitors and ITE IT8712F/8716F/8718F/8726F watchdog timer.
* remove fe(4). hasn't been enabled in 10 years, doesn't compile, no manpage.henning2007-07-041-7/+1
| | | | from brad, ok millert beck miod krw igor deraadt
* remove:henning2007-06-081-21/+1
| | | | | | | -entry for ix nic in files.isa, not even in tree -ep nic driver, replaced by ne ages ago -hp nic driver, broken for ages from brad, ok matthieu krw theo miod
* Stray reference in a comment to the dear departed wt.krw2007-05-291-2/+2
|
* Move tokenring support to the attic where it can join the cards that whereclaudio2007-05-291-8/+1
| | | | | decomissioned aeon ago. We will not miss it at all. OK dlg@ henning@ and a lot of cheers by other in the room
* Remove the Archive/Wangtek cartidge tape driver, wt(4). All tapes arekrw2007-05-281-6/+1
| | | | | | st(4). ok tom@ deraadt@ jason@
* Support for accesing 8-bit ISA I/O throught the gpio(4)grange2006-03-261-1/+6
| | | | | | | framework. Allows to use stupid GPIO device on the Acrosser AR-B1662 board. Work by form@.
* Rename lm_isa.c to lm78_isa.c. Now that there isn't really any NetBSD codekettenis2006-01-281-2/+2
| | | | | left, replace copyright with my own. requested by deraadt@
* Rename nslm7x.c into lm78.c and nslm7xvar.h into lm78var.h, and clean upkettenis2006-01-141-2/+2
| | | | | | lm78var.h. Now that I've completely rewritten the driver, replace copyright with my own. suggested by deraadt@
* Start of a driver for the "Active Protection System" accelerometerjsg2005-08-051-1/+6
| | | | | | | | | | | | | found in recentish ThinkPads. Sensors are reported via hw.sensors in sysctl but sensor numbers and presence is likely to change. Units and use of all of the sensors is not yet known as IBM has not released any documentation. Driver is based on information reverse engineered from the windows driver by Anurag Sharma and Mark Smith. "commit the code" deraadt@
* Add viasio(4), a driver for VIA VT1211 LPC Super I/O found ongrange2005-07-281-1/+6
| | | | | | | | | | some VIA CPU based boards. The driver provides temperature, voltage and fan tachometers values through the sysctl interface. Rickard Dahlstrand <rd@tilde.se> asked for this driver and provided access to the test board. Also tested by millert@. ok millert@
* Cosmetics...tdeval2005-03-081-19/+19
| | | | | Mainly remove space between locators parens, replace spaces with tabs where appropriate and consistently align dependencies.
* Add support for the GPIO logical device.grange2004-06-031-2/+2
| | | | ok deraadt@
* gscsio(4) -- National Semiconductor Geode SC1100 Super I/O driver.grange2004-05-231-1/+6
| | | | | | | | For now it only supports I2C-compatible ACCESS.bus interface, so we use it as an i2c master controller. ACCESS.bus interface is enabled and used on the PC Engines WRAP.1C board.
* temp/volt sensor for NS PC87366 LPC Super I/O; based on netbsd version; ok deraadtmarkus2004-01-051-1/+6
|
* remove support for non-existent scd and pcd drivers. ok deraadt millerttedu2003-11-031-11/+1
|
* it(4) driver provides support for ITE IT8705F, IT8712F and SiS SiS950grange2003-05-201-1/+6
| | | | | hardware monitoring chips to be used with hw.sensors sysctl interface. Work by Julien Bordet <zejames@greyhats.org> with my little help.
* lm(4) driver from NetBSD adapted for sysctl interface.grange2003-04-251-1/+5
| | | | | | | | The lm driver provides support for the National Semiconductor LM series hardware monitors and register compatible chips. It supports LM78, LM78-J, LM79, Winbond W83697HF, W83627HF, W83781D and W83782D chips. Tested and ok'ed by millert@ and henning@.
* typomickey2002-11-301-2/+2
|
* same devices named the samemickey2002-11-281-4/+4
|
* generic isa mpu, from Sergey A. Smitienko w/ fixes from memickey2002-11-281-7/+12
|
* support sf2r card with attenuator; from jumbo@ w/ some knf from mickey@mickey2002-10-151-2/+2
|
* update of radiotrack driver, including isapnp support; from jumbo@mickey2002-08-281-3/+5
|
* tuner driver for the fms cards.mickey2002-05-061-6/+6
| | | | | | | | | attach radio at the fms(4), instead of a separate device, which would never work out fine. from Vladimir Popov <jumbo@narod.ru> rework the radio config stuff (radio at radiobus, instead of radio at radio), allowing to tag source files in the files.* files w/ radio attribute. from mickey@
* soundforte radio driver, from Vladimir Popov <jumbo@narod.ru>mickey2002-04-251-1/+6
|
* only compile pckbc_isa if pckbc was configured on isamickey2002-02-121-2/+2
|
* bt no moremickey2002-01-271-6/+1
|
* bussified and bus-split bustec scsi ha driver.mickey2002-01-241-1/+5
| | | | | | | | original port done by chris@ in '98 and pounded into -current by me, plus support for wide mode. tested on pci in both modes by me, on eisa (w/ half success, thus not enabled yet) by jason@. niklas@, jason@, millert@ ok.
* add radiotack defsmickey2001-12-051-7/+17
|
* Attach sf2r and aztech.gluk2001-10-041-1/+11
| | | | From Maxim Tsyplakov <tm@oganer.net>, Vladimir Popov <jumbo@narod.ru>
* Move out the com at commulti attachment into an ownfile.art2001-09-301-1/+3
| | | | Same story as isapnp - not tested because i386 uses pccom.
* Next step in making the com driver improvable.art2001-09-291-1/+2
| | | | Split out the com at isa attachment into its own file.
* proper vga_* handling; pointed out by tholo@mickey2001-08-031-2/+2
|
* From NetBSD: driver for Addonics FlexPort 8Sjason2001-07-171-1/+5
| | | | | | KNF'd and interrupt routine rewritten in addition to normal porting. (Interrupts don't appear to work the way they are described, so depend on the slave devices doing the right thing).
* On my 10th wedding anniversary I am celebrating byniklas2001-07-131-1/+5
| | | | | | committing this driver for technology from back when I got married :-) It is for DEC EtherWorks cards, and comes from NetBSD. I have done severe KNF, and fixed the driver to work with PIO-only cards. Enjoy!
* Support for the wscons machine-independent console driver on the i386. Toaaron2001-01-301-2/+16
| | | | | | | | | | | become default in a few moments once deraadt commits new kernel config files. IMPORTANT NOTE: A few important pieces are still required to be worked out over the next few days. Users (and developers) relying on X should probably stay away from -current until further notice. This should not take long, but here is your first heads up. If you decide to upgrade your kernel anyway, be sure to update your /etc/ttys file to use vt100 instead of vt220. The rest of the fallout from this should be minor.
* Add tr driver; from NetBSD.fgsch1999-12-271-1/+8
|
* Driver for Hostess 4-channel serial mux, from Denis A. Doroshenkodownsj1999-11-281-1/+6
| | | | <cyxob@isl.vtu.lt>.
* factor out ie device definition; niklas@ okmickey1999-08-171-4/+3
|
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.