| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2015-06-10 | Use first 4 channels of the board. The previous channel setting | 1 | -3/+3 | ||
| caused DMA on the wrong memory location during recording. ok kettenis@ | |||||
| 2015-06-10 | Do not set "rcvif", if_input() does it for us. | 1 | -2/+1 | ||
| Found the hardway by krw@ trying a diff that kills "rcvif". ok stsp@ | |||||
| 2015-06-08 | rearrange delayed_work to avoid the use of container_of while leaving it in | 5 | -22/+23 | ||
| more or less the same shape. ok uebayasi@ | |||||
| 2015-06-08 | pms(4): Don't match Elantech v4 devices with firmware versions 0xX7XXXX. | 1 | -2/+3 | ||
| Apparently we don't support these touchpads properly so leave them in PS/2 compat mode. Regression reported by Remi Locherer on bugs@. And stop matching devices with firmware versions higher than 0xX8XXXX since we cannot be sure they work. ok mpi@ | |||||
| 2015-06-08 | refuse to do polled isochronous transfers, as other usb controller drivers do | 1 | -4/+5 | ||
| requested by mpi@ | |||||
| 2015-06-08 | Ensure polled bulk, control and interrupt transfers actually poll, fixing | 1 | -9/+6 | ||
| panics on shutdown with various usb sticks. ok mpi@ | |||||
| 2015-06-07 | The Swiss Federal Government decided to shut down HBG at the end of 2011. | 3 | -154/+12 | ||
| On 6 September 2012 at 12:02:00 UTC both antenna towers were demolished by controlled explosives. So this is not coming back and we can tedu the support for HBG form the DCF77 drivers. Remided by mbalmer | |||||
| 2015-06-07 | mark the usb hci driver pci glue code as only needed by the pci attachment, | 1 | -5/+5 | ||
| not all usb controllers. this lets jsg build ehci on a platform that lacks a pci bus. ok jsg@ | |||||
| 2015-06-05 | regen | 2 | -2/+7 | ||
| 2015-06-05 | Add another PCI ID for Intel Dual Band Wireless AC 3165. From brad. | 1 | -1/+2 | ||
| 2015-06-04 | attach rtwn at pci | 1 | -1/+6 | ||
| 2015-06-04 | New rtwn(4) driver for RTL8188CE wifi cards. | 2 | -0/+5375 | ||
| This is a PCI card from the same chip family as supported by urtwn(4) on USB. Development started in 2013 using urtwn(4) as a starting point but was dormant for much of the time since. I finally unslacked after uwe@ provided help with lifting this driver on its feet. As usual we got helpful hints from Theo. Requires firmware which will be available in ports soon. There are rate adaptation issues that still need to be fixed, cause unknown. In my testing the hardware rarely transmits more than 1Mbit/s. Committing over MAC/BB RTL8188CE, RF 6052 1T1R. | |||||
| 2015-06-04 | sync | 2 | -2/+7 | ||
| 2015-06-04 | + REALTEK RT8191SE | 1 | -1/+2 | ||
| 2015-06-04 | Add support for em(4) on Teak 3020, a Tolopai (EP80579) | 5 | -11/+243 | ||
| based devices. This introduces Realtek PHY into em driver code and is only a temporary solution to the problem. OK deraadt@ | |||||
| 2015-06-04 | regen | 2 | -0/+15 | ||
| 2015-06-04 | Add more of Tolopai (EP80579) Gigabit controllers id. | 1 | -3/+6 | ||
| 2015-06-04 | Check if interface was stopped before calling rx/tx interrupt routines. | 1 | -4/+7 | ||
| Report & tests by mxb@alumni.chalmers.se, thanks! OK deraadt, chris | |||||
| 2015-06-04 | Switch intel_gmbus_is_port_valid and intel_gmbus_is_forced_bit from | 1 | -3/+3 | ||
| extern inline back to static inline so the kernel will build on compilers that default to c99 inline semantics. | |||||
| 2015-06-04 | use mallocarray instead of malloc in drm_calloc | 1 | -2/+2 | ||
| 2015-06-04 | remove the now unused alawtolin16 table | 1 | -68/+1 | ||
| ok ratchov@ | |||||
| 2015-06-02 | Add missing define for hpb(4). | 1 | -2/+4 | ||
| 2015-06-01 | regen | 2 | -4/+4 | ||
| 2015-06-01 | fix typo: Wirelsss -> Wireless | 1 | -2/+2 | ||
| 2015-05-30 | DRMDEBUG not DRM_DEBUG. From frantisek holop. | 1 | -2/+2 | ||
| 2015-05-30 | Acquire/release the i2c bus before/after reading the temperature register. | 1 | -3/+4 | ||
| Prevents concurrent access to the smu(4) microcontroller on Apple G5 machines, which would result in errors reading the RTC. ok deraadt@, mpi@ | |||||
| 2015-05-30 | cleanup attach message | 1 | -2/+2 | ||
| 2015-05-29 | Nuke annoying whitespace nits to shrink some future diffs. | 3 | -12/+11 | ||
| 2015-05-29 | Revert unrelated changes in previous. | 3 | -40/+3 | ||
| 2015-05-29 | Initial addition of ``Patrol Read'' support in bio(4), biocto(8), and | 7 | -7/+265 | ||
| mfi(4). Based on FreeBSD, but done without mfiutil(8). OK deraadt@ | |||||
| 2015-05-27 | Use m_defrag(9) instead of rolling our own inlined version. | 4 | -74/+14 | ||
| ok mikeb@ | |||||
| 2015-05-27 | Improve the controller state check in xhci_reset | 1 | -2/+3 | ||
| From FreeBSD, OK mpi | |||||
| 2015-05-26 | Fix missing vlan.h include in if_vio.c | 1 | -1/+7 | ||
| patch by jsg@ | |||||
| 2015-05-26 | bump the number of tx and rx descriptors from 128 up to 512. | 1 | -3/+3 | ||
| 2015-05-26 | More than 100+ drivers converted to if_input(), this is the last "real" one. | 1 | -106/+11 | ||
| ok dlg@ | |||||
| 2015-05-26 | Build all the firmware for usb devices on armv7. | 5 | -11/+15 | ||
| 2015-05-25 | Initialize ipa_ndrq in isascan() too... | 1 | -1/+2 | ||
| 2015-05-25 | Match newer elantech v4 touchpads, logic taken from Linux. | 1 | -2/+2 | ||
| Based on a submission from and ok jcs@. | |||||
| 2015-05-25 | Make this build when using the __STRICT_ALIGNMENT version of USETW. | 1 | -2/+2 | ||
| 2015-05-25 | Prevent a use after free in by closing all open endpoints upon detach. | 1 | -14/+30 | ||
| Fix a panic reported by landry@ with Android's ADB. Tested and ok ajacoutot@ | |||||
| 2015-05-25 | missing word in comment; Kyle Milz | 1 | -2/+2 | ||
| 2015-05-24 | Initialize ipa_nirq in isascan(). Gets rid of spurious irq locators being | 1 | -1/+2 | ||
| printed for isadma(4). | |||||
| 2015-05-24 | Follow the recent pckbc@isa changes and always establish all the necessary | 3 | -17/+3 | ||
| interrupts at pckbc attach time, and get rid of the `intr_establish' pckbc callback. Tested on hppa (gsckbc) and sgi (pckbc@hpc); not tested on sparc64 (pckbc@ebus) but this attachment was already behaving this way and its intr_establish callback was an empty function. | |||||
| 2015-05-24 | Add udl(4) and uvideo(4) to armv7 GENERIC. Tested on my sabre lite (imx). | 1 | -1/+2 | ||
| enable udl firmware and COMPAT_RAW_KBD to make udl useable with X. ok jsg@ | |||||
| 2015-05-22 | Don't use an uninitialised softc pointer in midiread/midiwrite. | 1 | -3/+5 | ||
| ok ratchov@ | |||||
| 2015-05-22 | LITTE_ENDIAN -> LITTLE_ENDIAN | 1 | -2/+2 | ||
| ok ratchov@ | |||||
| 2015-05-22 | Limit the number of dma segments used for transmitting packets to | 1 | -2/+3 | ||
| IWM_NUM_OF_TBS - 2. We have IWM_NUM_OF_TBS slots, but use two of those for sending commands to the firmware. Hopefully fixes the iwm0: hardware error, stopping device errors I've seen somewhat regularly. ok claudio@, deraadt@ | |||||
| 2015-05-21 | Use m_defrag(9) instead of rolling our own version of it. | 1 | -25/+9 | ||
| ok jca@ | |||||
| 2015-05-21 | Establish interrupts for both keyboard and mouse slots at pckbc attach time, | 1 | -33/+24 | ||
| rather than lazily from pckbc when slots are discovered. This is consistent with what other isa devices (and pckbc on non-isa busses) do, and as a side effect, this makes the dmesg output shorter. This will also let us get rid of pckbc's intr_establish() callback in a later diff. Prompted by krw@ noticing ugly kernel output in a configuration with the mouse slot left empty. ok krw@ mpi@ | |||||
| 2015-05-21 | Report all valid interrupt locators in isaprint() - although config(8) stanzas | 1 | -7/+24 | ||
| only allow one irq for isa devices, there is actually support for more since we got isapnp(4) support, and upcoming changes will actually have regular isa(4) devices claim more than one irq in their indirect match function. | |||||
