1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
|
/* $OpenBSD: piixreg.h,v 1.6 2020/01/21 06:37:24 claudio Exp $ */
/*
* Copyright (c) 2005 Alexander Yurchenko <grange@openbsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _DEV_PCI_PIIXREG_H_
#define _DEV_PCI_PIIXREG_H_
/*
* Intel PCI-to-ISA / IDE Xcelerator (PIIX) register definitions.
*/
/*
* Power management registers.
*/
/* PCI configuration registers */
#define PIIX_SMB_BASE 0x90 /* SMBus base address */
#define PIIX_SMB_BASE_MASK 0xfffe
#define PIIX_SMB_HOSTC 0xd0 /* SMBus host configuration */
#define PIIX_SMB_HOSTC_HSTEN (1 << 16) /* enable host controller */
#define PIIX_SMB_HOSTC_SMI (0 << 17) /* SMI */
#define PIIX_SMB_HOSTC_IRQ (4 << 17) /* IRQ */
#define PIIX_SMB_HOSTC_INTMASK (7 << 17)
/* SMBus I/O registers */
#define PIIX_SMB_HS 0x00 /* host status */
#define PIIX_SMB_HS_BUSY (1 << 0) /* running a command */
#define PIIX_SMB_HS_INTR (1 << 1) /* command completed */
#define PIIX_SMB_HS_DEVERR (1 << 2) /* command error */
#define PIIX_SMB_HS_BUSERR (1 << 3) /* transaction collision */
#define PIIX_SMB_HS_FAILED (1 << 4) /* failed bus transaction */
#define PIIX_SMB_HS_BITS "\020\001BUSY\002INTR\003DEVERR\004BUSERR\005FAILED"
#define PIIX_SMB_HC 0x02 /* host control */
#define PIIX_SMB_HC_INTREN (1 << 0) /* enable interrupts */
#define PIIX_SMB_HC_KILL (1 << 1) /* kill current transaction */
#define PIIX_SMB_HC_CMD_QUICK (0 << 2) /* QUICK command */
#define PIIX_SMB_HC_CMD_BYTE (1 << 2) /* BYTE command */
#define PIIX_SMB_HC_CMD_BDATA (2 << 2) /* BYTE DATA command */
#define PIIX_SMB_HC_CMD_WDATA (3 << 2) /* WORD DATA command */
#define PIIX_SMB_HC_CMD_BLOCK (5 << 2) /* BLOCK command */
#define PIIX_SMB_HC_START (1 << 6) /* start transaction */
#define PIIX_SMB_HCMD 0x03 /* host command */
#define PIIX_SMB_TXSLVA 0x04 /* transmit slave address */
#define PIIX_SMB_TXSLVA_READ (1 << 0) /* read direction */
#define PIIX_SMB_TXSLVA_ADDR(x) (((x) & 0x7f) << 1) /* 7-bit address */
#define PIIX_SMB_HD0 0x05 /* host data 0 */
#define PIIX_SMB_HD1 0x06 /* host data 1 */
#define PIIX_SMB_HBDB 0x07 /* host block data byte */
#define PIIX_SMB_SC 0x08 /* slave control */
#define PIIX_SMB_SC_ALERTEN (1 << 3) /* enable SMBALERT# */
#define PIIX_SMB_SIZE 0x10 /* SMBus I/O space size */
/* AMD SB800 configuration registers */
#define SB800_PMREG_BASE 0xcd6
#define SB800_PMREG_SIZE 2 /* index/data pair */
#define SB800_PMREG_SMB0EN 0x2c /* 16-bit register */
#define SB800_PMREG_SMB0SEL 0x2e /* bus selection */
#define SB800_PMREG_SMB0SELEN 0x2f /* bus selection enable */
#define SB800_SMB0EN_EN 0x0001
#define SB800_SMB0EN_BASE_MASK 0xffe0
#define SB800_SMB0SELEN_EN 0x01
#define SB800_SMB_HOSTC 0x10 /* I2C bus configuration */
#define SB800_SMB_HOSTC_INTMASK 0x1 /* 0: SMI 1: IRQ */
#define SB800_SMB_SIZE 0x14 /* SMBus I/O space size */
/*
* Newer FCH registers in the PMIO space.
* See BKDG for Family 16h Models 30h-3Fh 3.26.13 PMx00 and PMx04.
*/
#define AMDFCH41_PM_DECODE_EN 0x00 /* 16-bit register */
#define AMDFCH41_PM_PORT_INDEX 0x02
#define AMDFCH41_SMBUS_EN 0x10
#endif /* !_DEV_PCI_PIIXREG_H_ */
|
