drm/amd/display: Remove Unused Registers

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

3 files changed, 1 insertions, 31 deletions

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
index 1b1ae9ce2799..3c6ecfe141bb 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.c
@@ -717,22 +717,5 @@ static void dsc_write_to_registers(struct display_stream_compressor *dsc, const
 		RANGE_MAX_QP14, reg_vals->pps.rc_range_params[14].range_max_qp,
 		RANGE_BPG_OFFSET14, reg_vals->pps.rc_range_params[14].range_bpg_offset);
 
-	if (IS_FPGA_MAXIMUS_DC(dsc20->base.ctx->dce_environment)) {
-		/* It's safe to do this as long as debug bus is not being used in DAL Diag environment.
-		 *
-		 * This is because DSCC_PPS_CONFIG4.INITIAL_DEC_DELAY is a read-only register field (because it's a decoder
-		 * value not required by DSC encoder). However, since decoding fails when this value is missing from PPS, it's
-		 * required to communicate this value to the PPS header. When testing on FPGA, the values for PPS header are
-		 * being read from Diag register dump. The register below is used in place of a scratch register to make
-		 * 'initial_dec_delay' available.
-		 */
-
-		temp_int = reg_vals->pps.initial_dec_delay;
-		REG_SET_4(DSCC_TEST_DEBUG_BUS_ROTATE, 0,
-			DSCC_TEST_DEBUG_BUS0_ROTATE, temp_int & 0x1f,
-			DSCC_TEST_DEBUG_BUS1_ROTATE, temp_int >> 5 & 0x1f,
-			DSCC_TEST_DEBUG_BUS2_ROTATE, temp_int >> 10 & 0x1f,
-			DSCC_TEST_DEBUG_BUS3_ROTATE, temp_int >> 15 & 0x1);
-	}
 }
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.h
index 9855a7ed0387..667640c4b288 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dsc.h
@@ -78,7 +78,6 @@
 	SRI(DSCC_RATE_CONTROL_BUFFER1_MAX_FULLNESS_LEVEL, DSCC, id),\
 	SRI(DSCC_RATE_CONTROL_BUFFER2_MAX_FULLNESS_LEVEL, DSCC, id),\
 	SRI(DSCC_RATE_CONTROL_BUFFER3_MAX_FULLNESS_LEVEL, DSCC, id),\
-	SRI(DSCC_TEST_DEBUG_BUS_ROTATE, DSCC, id),\
 	SRI(DSCCIF_CONFIG0, DSCCIF, id),\
 	SRI(DSCCIF_CONFIG1, DSCCIF, id),\
 	SRI(DSCRM_DSC_FORWARD_CONFIG, DSCRM, id)
@@ -95,8 +94,6 @@
 	DSC_SF(DSC_TOP0_DSC_TOP_CONTROL, DSC_CLOCK_EN, mask_sh), \
 	DSC_SF(DSC_TOP0_DSC_TOP_CONTROL, DSC_DISPCLK_R_GATE_DIS, mask_sh), \
 	DSC_SF(DSC_TOP0_DSC_TOP_CONTROL, DSC_DSCCLK_R_GATE_DIS, mask_sh), \
-	DSC_SF(DSC_TOP0_DSC_DEBUG_CONTROL, DSC_DBG_EN, mask_sh), \
-	DSC_SF(DSC_TOP0_DSC_DEBUG_CONTROL, DSC_TEST_CLOCK_MUX_SEL, mask_sh), \
 	DSC_SF(DSCC0_DSCC_CONFIG0, ICH_RESET_AT_END_OF_LINE, mask_sh), \
 	DSC_SF(DSCC0_DSCC_CONFIG0, NUMBER_OF_SLICES_PER_LINE, mask_sh), \
 	DSC_SF(DSCC0_DSCC_CONFIG0, ALTERNATE_ICH_ENCODING_EN, mask_sh), \
@@ -249,10 +246,6 @@
 	DSC_SF(DSCC0_DSCC_RATE_CONTROL_BUFFER1_MAX_FULLNESS_LEVEL, DSCC_RATE_CONTROL_BUFFER1_MAX_FULLNESS_LEVEL, mask_sh), \
 	DSC_SF(DSCC0_DSCC_RATE_CONTROL_BUFFER2_MAX_FULLNESS_LEVEL, DSCC_RATE_CONTROL_BUFFER2_MAX_FULLNESS_LEVEL, mask_sh), \
 	DSC_SF(DSCC0_DSCC_RATE_CONTROL_BUFFER3_MAX_FULLNESS_LEVEL, DSCC_RATE_CONTROL_BUFFER3_MAX_FULLNESS_LEVEL, mask_sh), \
-	DSC_SF(DSCC0_DSCC_TEST_DEBUG_BUS_ROTATE, DSCC_TEST_DEBUG_BUS0_ROTATE, mask_sh), \
-	DSC_SF(DSCC0_DSCC_TEST_DEBUG_BUS_ROTATE, DSCC_TEST_DEBUG_BUS1_ROTATE, mask_sh), \
-	DSC_SF(DSCC0_DSCC_TEST_DEBUG_BUS_ROTATE, DSCC_TEST_DEBUG_BUS2_ROTATE, mask_sh), \
-	DSC_SF(DSCC0_DSCC_TEST_DEBUG_BUS_ROTATE, DSCC_TEST_DEBUG_BUS3_ROTATE, mask_sh), \
 	DSC_SF(DSCCIF0_DSCCIF_CONFIG0, INPUT_INTERFACE_UNDERFLOW_RECOVERY_EN, mask_sh), \
 	DSC_SF(DSCCIF0_DSCCIF_CONFIG0, INPUT_INTERFACE_UNDERFLOW_OCCURRED_INT_EN, mask_sh), \
 	DSC_SF(DSCCIF0_DSCCIF_CONFIG0, INPUT_INTERFACE_UNDERFLOW_OCCURRED_STATUS, mask_sh), \
@@ -427,10 +420,6 @@
 	type DSCC_UPDATE_PENDING_STATUS; \
 	type DSCC_UPDATE_TAKEN_STATUS; \
 	type DSCC_UPDATE_TAKEN_ACK; \
-	type DSCC_TEST_DEBUG_BUS0_ROTATE; \
-	type DSCC_TEST_DEBUG_BUS1_ROTATE; \
-	type DSCC_TEST_DEBUG_BUS2_ROTATE; \
-	type DSCC_TEST_DEBUG_BUS3_ROTATE; \
 	type DSCC_RATE_BUFFER0_FULLNESS_LEVEL; \
 	type DSCC_RATE_BUFFER1_FULLNESS_LEVEL; \
 	type DSCC_RATE_BUFFER2_FULLNESS_LEVEL; \
@@ -503,7 +492,6 @@ struct dcn20_dsc_registers {
 	uint32_t DSCC_RATE_CONTROL_BUFFER1_MAX_FULLNESS_LEVEL;
 	uint32_t DSCC_RATE_CONTROL_BUFFER2_MAX_FULLNESS_LEVEL;
 	uint32_t DSCC_RATE_CONTROL_BUFFER3_MAX_FULLNESS_LEVEL;
-	uint32_t DSCC_TEST_DEBUG_BUS_ROTATE;
 	uint32_t DSCCIF_CONFIG0;
 	uint32_t DSCCIF_CONFIG1;
 	uint32_t DSCRM_DSC_FORWARD_CONFIG;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
index a6c8493001a6..db09f40075c2 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_link_encoder.h
@@ -147,8 +147,7 @@
 	LE_SF(DPCSTX0_DPCSTX_TX_CNTL, DPCS_TX_DATA_SWAP, mask_sh),\
 	LE_SF(DPCSTX0_DPCSTX_TX_CNTL, DPCS_TX_DATA_ORDER_INVERT, mask_sh),\
 	LE_SF(DPCSTX0_DPCSTX_TX_CNTL, DPCS_TX_FIFO_EN, mask_sh),\
-	LE_SF(DPCSTX0_DPCSTX_TX_CNTL, DPCS_TX_FIFO_RD_START_DELAY, mask_sh),\
-	LE_SF(DPCSTX0_DPCSTX_DEBUG_CONFIG, DPCS_DBG_CBUS_DIS, mask_sh)
+	LE_SF(DPCSTX0_DPCSTX_TX_CNTL, DPCS_TX_FIFO_RD_START_DELAY, mask_sh)
 
 #define DPCS_DCN2_MASK_SH_LIST(mask_sh)\
 	DPCS_MASK_SH_LIST(mask_sh),\