Merge tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The main thing this time around is support for suspend mode
  configuration from DT which will enable some very useful power savings
  on systems where we can't rely on the bootloader configuration.  We
  still don't really support dynamic configuration of this at runtime,
  that may come later if there is any demand.

  Summary:
   - Support for specifying the target regulation mode and voltage
     during system suspend via DT, enabling power savings in that mode.
   - Reduce the default verbosity of the logging on boot, improving boot
     times especially for systems with very large numbers of regulators.
   - Lots of cleanups and fixes for Maxim PMIC drivers.
   - New driver for Richtek RT5033"

* tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (62 commits)
  regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing
  regulator: sky81452: Modify Device Tree structure
  regulator: sky81452: Modify Device Tree structure
  dt-bindings: Update documentation for "system-power-controller" and fix misspellings
  of: Rename "poweroff-source" property to "system-power-controller"
  regulator: max77686: Remove support for board files
  regulator: max77802: Remove support for board files
  regulator: max77802: Fill regulator modes translation callback
  regulator: max77802: Document binding for regulator operating modes
  regulator: of: Add support for parsing initial and suspend modes
  regulator: of: Pass the regulator description in the match table
  regulator: of: Add regulator desc param to of_get_regulator_init_data()
  regulator: Add mode mapping function to struct regulator_desc
  regulator: Document binding for initial and suspend modes
  regulator: core: Add PRE_DISABLE notification
  regulator: gpio: fix parsing of gpio list
  regulator: rpm: add support for RPM-controller SMB208
  regulator: da9063: Do not transform local IRQ to virtual
  regulator: sky81452: Modify dependent Kconfig symbol
  regulator: rt5033: Add RT5033 Regulator device driver
  ...

1 files changed, 22 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 86074334e342..abb26b58c83e 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -19,6 +19,24 @@ Optional properties:
   design requires. This property describes the total system ramp time
   required due to the combination of internal ramping of the regulator itself,
   and board design issues such as trace capacitance and load on the supply.
+- regulator-state-mem sub-root node for Suspend-to-RAM mode
+  : suspend to memory, the device goes to sleep, but all data stored in memory,
+  only some external interrupt can wake the device.
+- regulator-state-disk sub-root node for Suspend-to-DISK mode
+  : suspend to disk, this state operates similarly to Suspend-to-RAM,
+  but includes a final step of writing memory contents to disk.
+- regulator-state-[mem/disk] node has following common properties:
+	- regulator-on-in-suspend: regulator should be on in suspend state.
+	- regulator-off-in-suspend: regulator should be off in suspend state.
+	- regulator-suspend-microvolt: regulator should be set to this voltage
+	  in suspend.
+	- regulator-mode: operating mode in the given suspend state.
+	  The set of possible operating modes depends on the capabilities of
+	  every hardware so the valid modes are documented on each regulator
+	  device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+  modes depends on the capabilities of every hardware so each device binding
+  documentation explains which values the regulator supports.
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
@@ -34,6 +52,10 @@ Example:
 		regulator-max-microvolt = <2500000>;
 		regulator-always-on;
 		vin-supply = <&vin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
 	};
 
 Regulator Consumers: