path: root/Documentation
diff options
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-08 20:42:41 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-08 20:42:41 -0800
commitf94784bdb114439eb3a5e62343826887bbf3f37c (patch)
tree70abbdfed3d3f6c5de6ae320292c51c9eb777b3a /Documentation
parentMerge tag 'regmap-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap (diff)
parentMerge remote-tracking branches 'regulator/topic/sky81452' and 'regulator/topic/stub' into regulator-next (diff)
Merge tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown: "The main thing this time around is support for suspend mode configuration from DT which will enable some very useful power savings on systems where we can't rely on the bootloader configuration. We still don't really support dynamic configuration of this at runtime, that may come later if there is any demand. Summary: - Support for specifying the target regulation mode and voltage during system suspend via DT, enabling power savings in that mode. - Reduce the default verbosity of the logging on boot, improving boot times especially for systems with very large numbers of regulators. - Lots of cleanups and fixes for Maxim PMIC drivers. - New driver for Richtek RT5033" * tag 'regulator-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (62 commits) regulator: core: Fix regualtor_ena_gpio_free not to access pin after freeing regulator: sky81452: Modify Device Tree structure regulator: sky81452: Modify Device Tree structure dt-bindings: Update documentation for "system-power-controller" and fix misspellings of: Rename "poweroff-source" property to "system-power-controller" regulator: max77686: Remove support for board files regulator: max77802: Remove support for board files regulator: max77802: Fill regulator modes translation callback regulator: max77802: Document binding for regulator operating modes regulator: of: Add support for parsing initial and suspend modes regulator: of: Pass the regulator description in the match table regulator: of: Add regulator desc param to of_get_regulator_init_data() regulator: Add mode mapping function to struct regulator_desc regulator: Document binding for initial and suspend modes regulator: core: Add PRE_DISABLE notification regulator: gpio: fix parsing of gpio list regulator: rpm: add support for RPM-controller SMB208 regulator: da9063: Do not transform local IRQ to virtual regulator: sky81452: Modify dependent Kconfig symbol regulator: rt5033: Add RT5033 Regulator device driver ...
Diffstat (limited to 'Documentation')
5 files changed, 85 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/power/power-controller.txt b/Documentation/devicetree/bindings/power/power-controller.txt
new file mode 100644
index 000000000000..4f7a3bc9c407
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/power-controller.txt
@@ -0,0 +1,18 @@
+* Generic system power control capability
+Power-management integrated circuits or miscellaneous hardware components are
+sometimes able to control the system power. The device driver associated with these
+components might need to define this capability, which tells the kernel that
+it can be used to switch off the system. The corresponding device must have the
+standard property "system-power-controller" in its device node. This property
+marks the device as able to control the system power. In order to test if this
+property is found programmatically, use the helper function
+"of_device_is_system_power_controller" from of.h .
+act8846: act8846@5 {
+ compatible = "active-semi,act8846";
+ status = "okay";
+ system-power-controller;
diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index 865614b34d6f..dad6358074ac 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -5,6 +5,10 @@ Required properties:
- compatible: "active-semi,act8846" or "active-semi,act8865"
- reg: I2C slave address
+Optional properties:
+- system-power-controller: Telling whether or not this pmic is controlling
+ the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
index 5aeaffc0f1f0..79e5476444f7 100644
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ b/Documentation/devicetree/bindings/regulator/max77802.txt
@@ -25,6 +25,29 @@ with their hardware counterparts as follow. The valid names are:
example: LDO1, LDO2, LDO35.
-BUCKn : for BUCKs, where n can lie in range 1 to 10.
example: BUCK1, BUCK5, BUCK10.
+The max77802 regulator supports two different operating modes: Normal and Low
+Power Mode. Some regulators support the modes to be changed at startup or by
+the consumers during normal operation while others only support to change the
+mode during system suspend. The standard regulator suspend states binding can
+be used to configure the regulator operating mode.
+The regulators that support the standard "regulator-initial-mode" property,
+changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
+The possible values for "regulator-initial-mode" and "regulator-mode" are:
+ 1: Normal regulator voltage output mode.
+ 3: Low Power which reduces the quiescent current down to only 1uA
+The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+header and can be included by device tree source files.
+The standard "regulator-mode" property can only be used for regulators that
+support changing their mode to Low Power Mode during suspend. These regulators
+are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
+been enabled for the given suspend state using "regulator-on-in-suspend" and
+has not been disabled for that state using "regulator-off-in-suspend".
max77802@09 {
@@ -36,11 +59,23 @@ Example:
#size-cells = <0>;
regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-initial-mode = <MAX77802_OPMODE_LP>;
+ };
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
buck1_reg: BUCK1 {
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 86074334e342..abb26b58c83e 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -19,6 +19,24 @@ Optional properties:
design requires. This property describes the total system ramp time
required due to the combination of internal ramping of the regulator itself,
and board design issues such as trace capacitance and load on the supply.
+- regulator-state-mem sub-root node for Suspend-to-RAM mode
+ : suspend to memory, the device goes to sleep, but all data stored in memory,
+ only some external interrupt can wake the device.
+- regulator-state-disk sub-root node for Suspend-to-DISK mode
+ : suspend to disk, this state operates similarly to Suspend-to-RAM,
+ but includes a final step of writing memory contents to disk.
+- regulator-state-[mem/disk] node has following common properties:
+ - regulator-on-in-suspend: regulator should be on in suspend state.
+ - regulator-off-in-suspend: regulator should be off in suspend state.
+ - regulator-suspend-microvolt: regulator should be set to this voltage
+ in suspend.
+ - regulator-mode: operating mode in the given suspend state.
+ The set of possible operating modes depends on the capabilities of
+ every hardware so the valid modes are documented on each regulator
+ device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+ modes depends on the capabilities of every hardware so each device binding
+ documentation explains which values the regulator supports.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
@@ -34,6 +52,10 @@ Example:
regulator-max-microvolt = <2500000>;
vin-supply = <&vin>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
Regulator Consumers:
diff --git a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
index 882455e9b36d..f9acbc1f3c6b 100644
--- a/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/sky81452-regulator.txt
@@ -1,6 +1,7 @@
SKY81452 voltage regulator
Required properties:
+- regulator node named lout.
- any required generic properties defined in regulator.txt
Optional properties:
@@ -9,8 +10,9 @@ Optional properties:
regulator {
- /* generic regulator properties */
- regulator-name = "touch_en";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <8000000>;
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };