Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix some section mismatch warnings
  [ARM] 4417/1: Serial: Fix AMBA drivers locking
  [ARM] 4394/1: ARMv7: Add the TLB range operations
  [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c
  [ARM] 4416/1: NWFPE: fix undeclared symbols
  [ARM] 4415/1: AML5900: fix sparse warnings from map_io
  [ARM] 4414/1: S3C2443: sparse fix for clock.c
  [ARM] 4412/1: S3C2412: reset errata fix
  [ARM] 4411/1: KS8695: Another serial driver fix
  [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init
  [ARM] Fix stacktrace FP range checking
  [ARM] use __used attribute
  [ARM] enable arbitary speed tty ioctls and split input/output speed
  [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h
  [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup
  [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code
  [ARM] 4404/1: Trivial IXP42x Kconfig cleanup
  [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator
  [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller
  [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ

1 files changed, 25 insertions, 12 deletions

diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 162c266e5f8f..9bf8ccbcaccf 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -22,6 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <asm/mach/time.h>
 
 static struct flash_platform_data nslu2_flash_data = {
 	.map_name		= "cfi_probe",
@@ -49,26 +50,26 @@ static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
 static struct resource nslu2_led_resources[] = {
 	{
 		.name		= "ready",  /* green led */
-		.start		= NSLU2_LED_GRN,
-		.end		= NSLU2_LED_GRN,
+		.start		= NSLU2_LED_GRN_GPIO,
+		.end		= NSLU2_LED_GRN_GPIO,
 		.flags		= IXP4XX_GPIO_HIGH,
 	},
 	{
 		.name		= "status", /* red led */
-		.start		= NSLU2_LED_RED,
-		.end		= NSLU2_LED_RED,
+		.start		= NSLU2_LED_RED_GPIO,
+		.end		= NSLU2_LED_RED_GPIO,
 		.flags		= IXP4XX_GPIO_HIGH,
 	},
 	{
 		.name		= "disk-1",
-		.start		= NSLU2_LED_DISK1,
-		.end		= NSLU2_LED_DISK1,
+		.start		= NSLU2_LED_DISK1_GPIO,
+		.end		= NSLU2_LED_DISK1_GPIO,
 		.flags		= IXP4XX_GPIO_LOW,
 	},
 	{
 		.name		= "disk-2",
-		.start		= NSLU2_LED_DISK2,
-		.end		= NSLU2_LED_DISK2,
+		.start		= NSLU2_LED_DISK2_GPIO,
+		.end		= NSLU2_LED_DISK2_GPIO,
 		.flags		= IXP4XX_GPIO_LOW,
 	},
 };
@@ -157,10 +158,21 @@ static void nslu2_power_off(void)
 	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
-static void __init nslu2_init(void)
+static void __init nslu2_timer_init(void)
 {
-	ixp4xx_timer_freq = NSLU2_FREQ;
+    /* The xtal on this machine is non-standard. */
+    ixp4xx_timer_freq = NSLU2_FREQ;
+
+    /* Call standard timer_init function. */
+    ixp4xx_timer_init();
+}
 
+static struct sys_timer nslu2_timer = {
+    .init   = nslu2_timer_init,
+};
+
+static void __init nslu2_init(void)
+{
 	ixp4xx_sys_init();
 
 	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
@@ -169,7 +181,8 @@ static void __init nslu2_init(void)
 
 	pm_power_off = nslu2_power_off;
 
-	/* This is only useful on a modified machine, but it is valuable
+	/*
+	 * This is only useful on a modified machine, but it is valuable
 	 * to have it first in order to see debug messages, and so that
 	 * it does *not* get removed if platform_add_devices fails!
 	 */
@@ -185,6 +198,6 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
-	.timer          = &ixp4xx_timer,
+	.timer          = &nslu2_timer,
 	.init_machine	= nslu2_init,
 MACHINE_END