Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 198 insertions, 0 deletions

diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
new file mode 100644
index 000000000000..ea5e77080e8d
--- /dev/null
+++ b/arch/ppc/syslib/cpm2_common.c
@@ -0,0 +1,198 @@
+/*
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ *	2.3.99 Updates
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/irq.h>
+#include <asm/mpc8260.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/immap_cpm2.h>
+#include <asm/cpm2.h>
+#include <asm/rheap.h>
+
+static void cpm2_dpinit(void);
+cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
+
+/* We allocate this here because it is used almost exclusively for
+ * the communication processor devices.
+ */
+cpm2_map_t *cpm2_immr;
+
+#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
+					   of space for CPM as it is larger
+					   than on PQ2 */
+
+void
+cpm2_reset(void)
+{
+	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+
+	/* Reclaim the DP memory for our use.
+	 */
+	cpm2_dpinit();
+
+	/* Tell everyone where the comm processor resides.
+	 */
+	cpmp = &cpm2_immr->im_cpm;
+}
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks.  The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers).  Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK	(((bd_t *)__res)->bi_brgfreq)
+#define BRG_UART_CLK	(BRG_INT_CLK/16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	volatile uint	*bp;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	if (brg < 4) {
+		bp = (uint *)&cpm2_immr->im_brgc1;
+	}
+	else {
+		bp = (uint *)&cpm2_immr->im_brgc5;
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	volatile uint	*bp;
+
+	if (brg < 4) {
+		bp = (uint *)&cpm2_immr->im_brgc1;
+	}
+	else {
+		bp = (uint *)&cpm2_immr->im_brgc5;
+		brg -= 4;
+	}
+	bp += brg;
+	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	if (div16)
+		*bp |= CPM_BRG_DIV16;
+}
+
+/*
+ * dpalloc / dpfree bits.
+ */
+static spinlock_t cpm_dpmem_lock;
+/* 16 blocks should be enough to satisfy all requests
+ * until the memory subsystem goes up... */
+static rh_block_t cpm_boot_dpmem_rh_block[16];
+static rh_info_t cpm_dpmem_info;
+
+static void cpm2_dpinit(void)
+{
+	spin_lock_init(&cpm_dpmem_lock);
+
+	/* initialize the info header */
+	rh_init(&cpm_dpmem_info, 1,
+			sizeof(cpm_boot_dpmem_rh_block) /
+			sizeof(cpm_boot_dpmem_rh_block[0]),
+			cpm_boot_dpmem_rh_block);
+
+	/* Attach the usable dpmem area */
+	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
+	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
+	 * varies with the processor and the microcode patches activated.
+	 * But the following should be at least safe.
+	 */
+	rh_attach_region(&cpm_dpmem_info, (void *)CPM_DATAONLY_BASE,
+			CPM_DATAONLY_SIZE);
+}
+
+/* This function returns an index into the DPRAM area.
+ */
+uint cpm_dpalloc(uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc);
+
+int cpm_dpfree(uint offset)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	ret = rh_free(&cpm_dpmem_info, (void *)offset);
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(cpm_dpfree);
+
+/* not sure if this is ever needed */
+uint cpm_dpalloc_fixed(uint offset, uint size, uint align)
+{
+	void *start;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpm_dpmem_lock, flags);
+	cpm_dpmem_info.alignment = align;
+	start = rh_alloc_fixed(&cpm_dpmem_info, (void *)offset, size, "commproc");
+	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
+
+	return (uint)start;
+}
+EXPORT_SYMBOL(cpm_dpalloc_fixed);
+
+void cpm_dpdump(void)
+{
+	rh_dump(&cpm_dpmem_info);
+}
+EXPORT_SYMBOL(cpm_dpdump);
+
+void *cpm_dpram_addr(uint offset)
+{
+	return (void *)&cpm2_immr->im_dprambase[offset];
+}
+EXPORT_SYMBOL(cpm_dpram_addr);