Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 194 insertions, 0 deletions

diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c
new file mode 100644
index 000000000000..bd564fb35ab6
--- /dev/null
+++ b/arch/ppc/syslib/m8260_pci.c
@@ -0,0 +1,194 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+
+#include "m8260_pci.h"
+
+
+/* PCI bus configuration registers.
+ */
+
+static void __init m8260_setup_pci(struct pci_controller *hose)
+{
+	volatile cpm2_map_t *immap = cpm2_immr;
+	unsigned long pocmr;
+	u16 tempShort;
+
+#ifndef CONFIG_ATC 	/* already done in U-Boot */
+	/* 
+	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), 
+	 * and local bus for PCI (SIUMCR [LBPC]).
+	 */
+	immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
+#endif
+
+	/* Make PCI lowest priority */
+	/* Each 4 bits is a device bus request  and the MS 4bits 
+	   is highest priority */
+	/* Bus               4bit value 
+	   ---               ----------
+	   CPM high          0b0000
+	   CPM middle        0b0001
+	   CPM low           0b0010
+	   PCI reguest       0b0011
+	   Reserved          0b0100
+	   Reserved          0b0101
+	   Internal Core     0b0110
+	   External Master 1 0b0111
+	   External Master 2 0b1000
+	   External Master 3 0b1001
+	   The rest are reserved */
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+
+	/* Park bus on core while modifying PCI Bus accesses */
+	immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI space. This 
+	 * window is set up using the first SIU PCIBR registers.
+	 */
+	immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
+	immap->im_memctl.memc_pcibr0 =	MPC826x_PCI_BASE | PCIBR_ENABLE;
+
+	/* Disable machine check on no response or target abort */
+	immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
+	/* Release PCI RST (by default the PCI RST signal is held low)  */
+	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+	/* give it some time */
+	mdelay(1);
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI Memory (prefetch) 
+	 * space. This window is set up using the first set of Outbound ATU registers.
+	 */
+	immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
+	immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
+	pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI Memory (non-prefetch) 
+	 * space. This window is set up using the second set of Outbound ATU registers.
+	 */
+	immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
+	immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
+	pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
+
+	/* 
+	 * Set up master window that allows the CPU to access PCI IO space. This window
+	 * is set up using the third set of Outbound ATU registers.
+	 */
+	immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
+	immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
+	pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
+
+	/* 
+	 * Set up slave window that allows PCI masters to access MPC826x local memory. 
+	 * This window is set up using the first set of Inbound ATU registers
+	 */
+
+	immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
+	immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
+	pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
+	immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
+
+	/* See above for description - puts PCI request as highest priority */
+	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+
+	/* Park the bus on the PCI */
+	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+	/* Host mode - specify the bridge as a host-PCI bridge */
+	early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
+
+	/* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
+	early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
+	early_write_config_word(hose, 0, 0, PCI_COMMAND,
+				tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+}
+
+void __init m8260_find_bridges(void)
+{
+	extern int pci_assign_all_busses;
+	struct pci_controller * hose;
+
+	pci_assign_all_busses = 1;
+
+	hose = pcibios_alloc_controller();
+
+	if (!hose)
+		return;
+
+	ppc_md.pci_swizzle = common_swizzle;
+
+	hose->first_busno = 0;
+	hose->bus_offset = 0;
+	hose->last_busno = 0xff;
+
+	setup_m8260_indirect_pci(hose, 
+				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+	m8260_setup_pci(hose);
+        hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
+
+        isa_io_base =
+                (unsigned long) ioremap(MPC826x_PCI_IO_BASE,
+                                        MPC826x_PCI_IO_SIZE);
+        hose->io_base_virt = (void *) isa_io_base;
+ 
+        /* setup resources */
+        pci_init_resource(&hose->mem_resources[0],
+			  MPC826x_PCI_LOWER_MEM,
+			  MPC826x_PCI_UPPER_MEM,
+			  IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+        pci_init_resource(&hose->mem_resources[1],
+			  MPC826x_PCI_LOWER_MMIO,
+			  MPC826x_PCI_UPPER_MMIO,
+			  IORESOURCE_MEM, "PCI memory");
+
+        pci_init_resource(&hose->io_resource,
+			  MPC826x_PCI_LOWER_IO,
+			  MPC826x_PCI_UPPER_IO,
+			  IORESOURCE_IO, "PCI I/O");
+}