Merge tag 'mmc-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fixup max_discard/trim calculations
   - Announce SD specs greater than 4.0
   - Add discard support for SD cards
   - Don't do retries for CMD6 (SWITCH command)
   - Various cleanups and re-structuring

  MMC host:
   - cqhci:
      * Add maintainers for eMMC CQHCI driver
   - sdhci:
      * Consolidate WP GPIO code
      * Add ADMA3 DMA support for V4 enabled host
      * Fixup card detect support in pci-o2micro driver
      * Add support for CMDQ and SDMMC pads auto-calibration in tegra
        driver
      * Add DCMD support and CMDQ support, support for i.MX6ULL variant,
        fixup HS400 timing issue and add HS400_ES support for i.MX8QXP
        to esdhc-imx driver
      * Avoid CRC errors by adjusting settings to speed mode and fixup
        card initialization for high speed mode in renesas_sdhi
      * Fixup timeout settings for omap
      * Enable 8 bits bus-width support in atmel-mci
      * Convert some legacy code in jz4740 driver to use modern APIs
      * Send a CMD12 to clear DPSM at errors for STM32 sdmmc mmci
        driver"

* tag 'mmc-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (69 commits)
  mmc:fix a bug when max_discard is 0
  mmc: core: Add a debug print when the card may have been replaced
  mmc: core: Add sd discard timeout
  mmc: core: Add discard support to sd
  mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE
  mmc: core: do not retry CMD6 in __mmc_switch()
  mmc: core: Convert mmc_align_data_size() into an SDIO specific function
  mmc: core: Move mmc_of_parse_voltage() to host.c
  mmc: core: Convert mmc_regulator_get_ocrmask() to static
  mmc: core: Move regulator helpers to separate file
  mmc: of_mmc_spi: Convert to mmc_of_parse_voltage()
  mmc: core: Drop retries as in-parameter to mmc_wait_for_app_cmd()
  mmc: core: Convert mmc_wait_for_app_cmd() to static
  mmc: renesas_sdhi: Change HW adjustment register according to speed mode
  mmc: mmci: Send a CMD12 to clear the DPSM at errors
  mmc: sdhci-xenon: Fixup already marked switch fall-through
  mmc: sdhci-tegra: drop ->get_ro() implementation
  mmc: sdhci-omap: drop ->get_ro() implementation
  mmc: sdhci: use WP GPIO in sdhci_check_ro()
  mmc: wmt-sdmmc: Drop unused include
  ...

1 files changed, 21 insertions, 6 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index eba9bcc92ad3..a8141ff9be03 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -883,7 +883,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
 			     bool *too_big)
 {
 	u8 count;
-	struct mmc_data *data = cmd->data;
+	struct mmc_data *data;
 	unsigned target_timeout, current_timeout;
 
 	*too_big = true;
@@ -897,6 +897,11 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd,
 	if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
 		return 0xE;
 
+	/* Unspecified command, asume max */
+	if (cmd == NULL)
+		return 0xE;
+
+	data = cmd->data;
 	/* Unspecified timeout, assume max */
 	if (!data && !cmd->busy_timeout)
 		return 0xE;
@@ -2048,6 +2053,8 @@ static int sdhci_check_ro(struct sdhci_host *host)
 		is_readonly = 0;
 	else if (host->ops->get_ro)
 		is_readonly = host->ops->get_ro(host);
+	else if (mmc_can_gpio_ro(host->mmc))
+		is_readonly = mmc_gpio_get_ro(host->mmc);
 	else
 		is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
 				& SDHCI_WRITE_PROTECT);
@@ -2376,6 +2383,10 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
 			return -ETIMEDOUT;
 		}
 
+		/* Spec does not require a delay between tuning cycles */
+		if (host->tuning_delay > 0)
+			mdelay(host->tuning_delay);
+
 		ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 		if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
 			if (ctrl & SDHCI_CTRL_TUNED_CLK)
@@ -2383,9 +2394,6 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
 			break;
 		}
 
-		/* Spec does not require a delay between tuning cycles */
-		if (host->tuning_delay > 0)
-			mdelay(host->tuning_delay);
 	}
 
 	pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
@@ -3353,7 +3361,14 @@ void sdhci_cqe_enable(struct mmc_host *mmc)
 
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 	ctrl &= ~SDHCI_CTRL_DMA_MASK;
-	if (host->flags & SDHCI_USE_64_BIT_DMA)
+	/*
+	 * Host from V4.10 supports ADMA3 DMA type.
+	 * ADMA3 performs integrated descriptor which is more suitable
+	 * for cmd queuing to fetch both command and transfer descriptors.
+	 */
+	if (host->v4_mode && (host->caps1 & SDHCI_CAN_DO_ADMA3))
+		ctrl |= SDHCI_CTRL_ADMA3;
+	else if (host->flags & SDHCI_USE_64_BIT_DMA)
 		ctrl |= SDHCI_CTRL_ADMA64;
 	else
 		ctrl |= SDHCI_CTRL_ADMA32;
@@ -3363,7 +3378,7 @@ void sdhci_cqe_enable(struct mmc_host *mmc)
 		     SDHCI_BLOCK_SIZE);
 
 	/* Set maximum timeout */
-	sdhci_writeb(host, 0xE, SDHCI_TIMEOUT_CONTROL);
+	sdhci_set_timeout(host, NULL);
 
 	host->ier = host->cqe_ier;