Merge branch 'for-next' of git://github.com/rydberg/linux into next

Pull in changes from Henrik: "a trivial MT documentation fix".

1 files changed, 99 insertions, 98 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index db0e66f6dd0e..d07b6af3a937 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -26,6 +26,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
 
 #include "8250.h"
 
@@ -34,9 +36,6 @@
 #define DW_UART_CPR	0xf4 /* Component Parameter Register */
 #define DW_UART_UCV	0xf8 /* UART Component Version */
 
-/* Intel Low Power Subsystem specific */
-#define LPSS_PRV_CLOCK_PARAMS 0x800
-
 /* Component Parameter Register bits */
 #define DW_UART_CPR_ABP_DATA_WIDTH	(3 << 0)
 #define DW_UART_CPR_AFCE_MODE		(1 << 4)
@@ -55,8 +54,9 @@
 
 
 struct dw8250_data {
-	int	last_lcr;
-	int	line;
+	int		last_lcr;
+	int		line;
+	struct clk	*clk;
 };
 
 static void dw8250_serial_out(struct uart_port *p, int offset, int value)
@@ -113,6 +113,18 @@ static int dw8250_handle_irq(struct uart_port *p)
 	return 0;
 }
 
+static void
+dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
+{
+	if (!state)
+		pm_runtime_get_sync(port->dev);
+
+	serial8250_do_pm(port, state, old);
+
+	if (state)
+		pm_runtime_put_sync_suspend(port->dev);
+}
+
 static int dw8250_probe_of(struct uart_port *p)
 {
 	struct device_node	*np = p->dev->of_node;
@@ -136,8 +148,13 @@ static int dw8250_probe_of(struct uart_port *p)
 	if (!of_property_read_u32(np, "reg-shift", &val))
 		p->regshift = val;
 
+	/* clock got configured through clk api, all done */
+	if (p->uartclk)
+		return 0;
+
+	/* try to find out clock frequency from DT as fallback */
 	if (of_property_read_u32(np, "clock-frequency", &val)) {
-		dev_err(p->dev, "no clock-frequency property set\n");
+		dev_err(p->dev, "clk or clock-frequency not defined\n");
 		return -EINVAL;
 	}
 	p->uartclk = val;
@@ -146,67 +163,10 @@ static int dw8250_probe_of(struct uart_port *p)
 }
 
 #ifdef CONFIG_ACPI
-static bool dw8250_acpi_dma_filter(struct dma_chan *chan, void *parm)
-{
-	return chan->chan_id == *(int *)parm;
-}
-
-static acpi_status
-dw8250_acpi_walk_resource(struct acpi_resource *res, void *data)
-{
-	struct uart_port		*p = data;
-	struct uart_8250_port		*port;
-	struct uart_8250_dma		*dma;
-	struct acpi_resource_fixed_dma	*fixed_dma;
-	struct dma_slave_config		*slave;
-
-	port = container_of(p, struct uart_8250_port, port);
-
-	switch (res->type) {
-	case ACPI_RESOURCE_TYPE_FIXED_DMA:
-		fixed_dma = &res->data.fixed_dma;
-
-		/* TX comes first */
-		if (!port->dma) {
-			dma = devm_kzalloc(p->dev, sizeof(*dma), GFP_KERNEL);
-			if (!dma)
-				return AE_NO_MEMORY;
-
-			port->dma = dma;
-			slave = &dma->txconf;
-
-			slave->direction	= DMA_MEM_TO_DEV;
-			slave->dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
-			slave->slave_id		= fixed_dma->request_lines;
-			slave->dst_maxburst	= port->tx_loadsz / 4;
-
-			dma->tx_chan_id		= fixed_dma->channels;
-			dma->tx_param		= &dma->tx_chan_id;
-			dma->fn			= dw8250_acpi_dma_filter;
-		} else {
-			dma = port->dma;
-			slave = &dma->rxconf;
-
-			slave->direction	= DMA_DEV_TO_MEM;
-			slave->src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
-			slave->slave_id		= fixed_dma->request_lines;
-			slave->src_maxburst	= p->fifosize / 4;
-
-			dma->rx_chan_id		= fixed_dma->channels;
-			dma->rx_param		= &dma->rx_chan_id;
-		}
-
-		break;
-	}
-
-	return AE_OK;
-}
-
-static int dw8250_probe_acpi(struct uart_port *p)
+static int dw8250_probe_acpi(struct uart_8250_port *up)
 {
 	const struct acpi_device_id *id;
-	acpi_status status;
-	u32 reg;
+	struct uart_port *p = &up->port;
 
 	id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev);
 	if (!id)
@@ -216,26 +176,21 @@ static int dw8250_probe_acpi(struct uart_port *p)
 	p->serial_in = dw8250_serial_in32;
 	p->serial_out = dw8250_serial_out32;
 	p->regshift = 2;
-	p->uartclk = (unsigned int)id->driver_data;
 
-	status = acpi_walk_resources(ACPI_HANDLE(p->dev), METHOD_NAME__CRS,
-				     dw8250_acpi_walk_resource, p);
-	if (ACPI_FAILURE(status)) {
-		dev_err_ratelimited(p->dev, "%s failed \"%s\"\n", __func__,
-				    acpi_format_exception(status));
-		return -ENODEV;
-	}
+	if (!p->uartclk)
+		p->uartclk = (unsigned int)id->driver_data;
 
-	/* Fix Haswell issue where the clocks do not get enabled */
-	if (!strcmp(id->id, "INT33C4") || !strcmp(id->id, "INT33C5")) {
-		reg = readl(p->membase + LPSS_PRV_CLOCK_PARAMS);
-		writel(reg | 1, p->membase + LPSS_PRV_CLOCK_PARAMS);
-	}
+	up->dma = devm_kzalloc(p->dev, sizeof(*up->dma), GFP_KERNEL);
+	if (!up->dma)
+		return -ENOMEM;
+
+	up->dma->rxconf.src_maxburst = p->fifosize / 4;
+	up->dma->txconf.dst_maxburst = p->fifosize / 4;
 
 	return 0;
 }
 #else
-static inline int dw8250_probe_acpi(struct uart_port *p)
+static inline int dw8250_probe_acpi(struct uart_8250_port *up)
 {
 	return -ENODEV;
 }
@@ -266,7 +221,11 @@ static void dw8250_setup_port(struct uart_8250_port *up)
 		p->flags |= UPF_FIXED_TYPE;
 		p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
 		up->tx_loadsz = p->fifosize;
+		up->capabilities = UART_CAP_FIFO;
 	}
+
+	if (reg & DW_UART_CPR_AFCE_MODE)
+		up->capabilities |= UART_CAP_AFE;
 }
 
 static int dw8250_probe(struct platform_device *pdev)
@@ -286,17 +245,30 @@ static int dw8250_probe(struct platform_device *pdev)
 	uart.port.mapbase = regs->start;
 	uart.port.irq = irq->start;
 	uart.port.handle_irq = dw8250_handle_irq;
+	uart.port.pm = dw8250_do_pm;
 	uart.port.type = PORT_8250;
 	uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
 	uart.port.dev = &pdev->dev;
 
-	uart.port.membase = ioremap(regs->start, resource_size(regs));
+	uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
+					 resource_size(regs));
 	if (!uart.port.membase)
 		return -ENOMEM;
 
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (!IS_ERR(data->clk)) {
+		clk_prepare_enable(data->clk);
+		uart.port.uartclk = clk_get_rate(data->clk);
+	}
+
 	uart.port.iotype = UPIO_MEM;
 	uart.port.serial_in = dw8250_serial_in;
 	uart.port.serial_out = dw8250_serial_out;
+	uart.port.private_data = data;
 
 	dw8250_setup_port(&uart);
 
@@ -305,25 +277,22 @@ static int dw8250_probe(struct platform_device *pdev)
 		if (err)
 			return err;
 	} else if (ACPI_HANDLE(&pdev->dev)) {
-		err = dw8250_probe_acpi(&uart.port);
+		err = dw8250_probe_acpi(&uart);
 		if (err)
 			return err;
 	} else {
 		return -ENODEV;
 	}
 
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	uart.port.private_data = data;
-
 	data->line = serial8250_register_8250_port(&uart);
 	if (data->line < 0)
 		return data->line;
 
 	platform_set_drvdata(pdev, data);
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 }
 
@@ -331,34 +300,66 @@ static int dw8250_remove(struct platform_device *pdev)
 {
 	struct dw8250_data *data = platform_get_drvdata(pdev);
 
+	pm_runtime_get_sync(&pdev->dev);
+
 	serial8250_unregister_port(data->line);
 
+	if (!IS_ERR(data->clk))
+		clk_disable_unprepare(data->clk);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int dw8250_suspend(struct platform_device *pdev, pm_message_t state)
+static int dw8250_suspend(struct device *dev)
 {
-	struct dw8250_data *data = platform_get_drvdata(pdev);
+	struct dw8250_data *data = dev_get_drvdata(dev);
 
 	serial8250_suspend_port(data->line);
 
 	return 0;
 }
 
-static int dw8250_resume(struct platform_device *pdev)
+static int dw8250_resume(struct device *dev)
 {
-	struct dw8250_data *data = platform_get_drvdata(pdev);
+	struct dw8250_data *data = dev_get_drvdata(dev);
 
 	serial8250_resume_port(data->line);
 
 	return 0;
 }
-#else
-#define dw8250_suspend NULL
-#define dw8250_resume NULL
 #endif /* CONFIG_PM */
 
+#ifdef CONFIG_PM_RUNTIME
+static int dw8250_runtime_suspend(struct device *dev)
+{
+	struct dw8250_data *data = dev_get_drvdata(dev);
+
+	if (!IS_ERR(data->clk))
+		clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int dw8250_runtime_resume(struct device *dev)
+{
+	struct dw8250_data *data = dev_get_drvdata(dev);
+
+	if (!IS_ERR(data->clk))
+		clk_prepare_enable(data->clk);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops dw8250_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dw8250_suspend, dw8250_resume)
+	SET_RUNTIME_PM_OPS(dw8250_runtime_suspend, dw8250_runtime_resume, NULL)
+};
+
 static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "snps,dw-apb-uart" },
 	{ /* Sentinel */ }
@@ -366,8 +367,9 @@ static const struct of_device_id dw8250_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
 static const struct acpi_device_id dw8250_acpi_match[] = {
-	{ "INT33C4", 100000000 },
-	{ "INT33C5", 100000000 },
+	{ "INT33C4", 0 },
+	{ "INT33C5", 0 },
+	{ "80860F0A", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
@@ -376,13 +378,12 @@ static struct platform_driver dw8250_platform_driver = {
 	.driver = {
 		.name		= "dw-apb-uart",
 		.owner		= THIS_MODULE,
+		.pm		= &dw8250_pm_ops,
 		.of_match_table	= dw8250_of_match,
 		.acpi_match_table = ACPI_PTR(dw8250_acpi_match),
 	},
 	.probe			= dw8250_probe,
 	.remove			= dw8250_remove,
-	.suspend		= dw8250_suspend,
-	.resume			= dw8250_resume,
 };
 
 module_platform_driver(dw8250_platform_driver);