Merge tag 'usb-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.9 merge window

This time around we have 92 non-merge commits. Most
of the changes are in drivers/usb/gadget (40.3%)
with drivers/usb/gadget/function being the most
active directory (27.2%).

As for UDC drivers, only dwc3 (26.5%) and dwc2
(12.7%) have really been active.

The most important changes for dwc3 are better
support for scatterlist and, again, throughput
improvements. While on dwc2 got some minor stability
fixes related to soft reset and FIFO usage.

Felipe Tonello has done some good work fixing up our
f_midi gadget and Tal Shorer has implemented a nice
API change for our ULPI bus.

Apart from these, we have our usual set of
non-critical fixes, spelling fixes, build warning
fixes, etc.

1 files changed, 108 insertions, 14 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 35d092456bec..7287a763cd0c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -49,6 +49,57 @@
 
 #define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
+/**
+ * dwc3_get_dr_mode - Validates and sets dr_mode
+ * @dwc: pointer to our context structure
+ */
+static int dwc3_get_dr_mode(struct dwc3 *dwc)
+{
+	enum usb_dr_mode mode;
+	struct device *dev = dwc->dev;
+	unsigned int hw_mode;
+
+	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
+		dwc->dr_mode = USB_DR_MODE_OTG;
+
+	mode = dwc->dr_mode;
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+
+	switch (hw_mode) {
+	case DWC3_GHWPARAMS0_MODE_GADGET:
+		if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) {
+			dev_err(dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+		break;
+	case DWC3_GHWPARAMS0_MODE_HOST:
+		if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
+			dev_err(dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+		break;
+	default:
+		if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != dwc->dr_mode) {
+		dev_warn(dev,
+			 "Configuration mismatch. dr_mode forced to %s\n",
+			 mode == USB_DR_MODE_HOST ? "host" : "gadget");
+
+		dwc->dr_mode = mode;
+	}
+
+	return 0;
+}
+
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
 	u32 reg;
@@ -448,6 +499,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	if (dwc->dis_u3_susphy_quirk)
 		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
 
+	if (dwc->dis_del_phy_power_chg_quirk)
+		reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -485,6 +539,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 		break;
 	}
 
+	switch (dwc->hsphy_mode) {
+	case USBPHY_INTERFACE_MODE_UTMI:
+		reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+		reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT);
+		break;
+	case USBPHY_INTERFACE_MODE_UTMIW:
+		reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM_MASK);
+		reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) |
+		       DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
+		break;
+	default:
+		break;
+	}
+
 	/*
 	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
 	 * '0' during coreConsultant configuration. So default value will
@@ -500,6 +571,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	if (dwc->dis_enblslpm_quirk)
 		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
 
+	if (dwc->dis_u2_freeclk_exists_quirk)
+		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
+
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 
 	return 0;
@@ -666,6 +740,32 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		goto err4;
 	}
 
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+		break;
+	case USB_DR_MODE_HOST:
+		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
+		break;
+	case USB_DR_MODE_OTG:
+		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
+		break;
+	default:
+		dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode);
+		break;
+	}
+
+	/*
+	 * ENDXFER polling is available on version 3.10a and later of
+	 * the DWC_usb3 controller. It is NOT available in the
+	 * DWC_usb31 controller.
+	 */
+	if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL2);
+		reg |= DWC3_GUCTL2_RST_ACTBITLATER;
+		dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
+	}
+
 	return 0;
 
 err4:
@@ -763,7 +863,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -772,7 +871,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_HOST:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -781,7 +879,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_OTG:
-		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
 			if (ret != -EPROBE_DEFER)
@@ -888,6 +985,7 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	dwc->maximum_speed = usb_get_maximum_speed(dev);
 	dwc->dr_mode = usb_get_dr_mode(dev);
+	dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
 
 	dwc->has_lpm_erratum = device_property_read_bool(dev,
 				"snps,has-lpm-erratum");
@@ -924,6 +1022,10 @@ static int dwc3_probe(struct platform_device *pdev)
 				"snps,dis_enblslpm_quirk");
 	dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev,
 				"snps,dis_rxdet_inp3_quirk");
+	dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
+				"snps,dis-u2-freeclk-exists-quirk");
+	dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+				"snps,dis-del-phy-power-chg-quirk");
 
 	dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
 				"snps,tx_de_emphasis_quirk");
@@ -972,17 +1074,9 @@ static int dwc3_probe(struct platform_device *pdev)
 		goto err2;
 	}
 
-	if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
-			(dwc->dr_mode == USB_DR_MODE_OTG ||
-					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
-		dwc->dr_mode = USB_DR_MODE_HOST;
-	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
-			(dwc->dr_mode == USB_DR_MODE_OTG ||
-					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
-		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
-
-	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
-		dwc->dr_mode = USB_DR_MODE_OTG;
+	ret = dwc3_get_dr_mode(dwc);
+	if (ret)
+		goto err3;
 
 	ret = dwc3_alloc_scratch_buffers(dwc);
 	if (ret)