diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/marvell')
6 files changed, 95 insertions, 32 deletions
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt index 098d932fc963..c83245065d44 100644 --- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt @@ -72,7 +72,7 @@ mpp19 19 gpio, uart0(rxd), sdio(pw_off) GPIO: ----- For common binding part and usage, refer to -Documentation/devicetree/bindings/gpio/gpio-mvebu.txt. +Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml. Required properties: @@ -80,6 +80,11 @@ Required properties: - offset: offset address inside the syscon block +Optional properties: + +- marvell,pwm-offset: offset address of PWM duration control registers inside + the syscon block + Example: ap_syscon: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; @@ -101,6 +106,9 @@ ap_syscon: system-controller@6f4000 { gpio-controller; #gpio-cells = <2>; gpio-ranges = <&ap_pinctrl 0 0 19>; + marvell,pwm-offset = <0x10c0>; + #pwm-cells = <2>; + clocks = <&ap_clk 3>; }; }; @@ -111,7 +119,7 @@ Thermal: -------- For common binding part and usage, refer to -Documentation/devicetree/bindings/thermal/thermal.txt +Documentation/devicetree/bindings/thermal/thermal*.yaml The thermal IP can probe the temperature all around the processor. It may feature several channels, each of them wired to one sensor. diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt index f6d6642d81c0..29fa93dad52b 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt @@ -1,21 +1,3 @@ -Marvell Armada 37xx Platforms Device Tree Bindings --------------------------------------------------- - -Boards using a SoC of the Marvell Armada 37xx family must carry the -following root node property: - - - compatible: must contain "marvell,armada3710" - -In addition, boards using the Marvell Armada 3720 SoC shall have the -following property before the previous one: - - - compatible: must contain "marvell,armada3720" - -Example: - -compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; - - Power management ---------------- @@ -48,11 +30,3 @@ avs: avs@11500 { compatible = "marvell,armada-3700-avs", "syscon"; reg = <0x11500 0x40>; } - - -CZ.NIC's Turris Mox SOHO router Device Tree Bindings ----------------------------------------------------- - -Required root node property: - - - compatible: must contain "cznic,turris-mox" diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml new file mode 100644 index 000000000000..6905d29f3108 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/armada-37xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 37xx Platforms + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Armada 3720 SoC boards + items: + - enum: + - cznic,turris-mox + - globalscale,espressobin + - marvell,armada-3720-db + - methode,edpu + - methode,udpu + - const: marvell,armada3720 + - const: marvell,armada3710 + + - description: Globalscale Espressobin boards + items: + - enum: + - globalscale,espressobin-emmc + - globalscale,espressobin-ultra + - globalscale,espressobin-v7 + - const: globalscale,espressobin + - const: marvell,armada3720 + - const: marvell,armada3710 + + - description: Globalscale Espressobin V7 boards + items: + - enum: + - globalscale,espressobin-v7-emmc + - const: globalscale,espressobin-v7 + - const: globalscale,espressobin + - const: marvell,armada3720 + - const: marvell,armada3710 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index a9828c50c0fb..e9bf3054529f 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -59,3 +59,5 @@ properties: - const: marvell,cn9130 - const: marvell,armada-ap807-quad - const: marvell,armada-ap807 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index f982a8ed9396..d84105c7c935 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -142,8 +142,8 @@ mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg( mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) -mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect) -mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect) +mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect) +mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect) mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) @@ -156,7 +156,7 @@ GPIO: ----- For common binding part and usage, refer to -Documentation/devicetree/bindings/gpio/gpio-mvebu.txt. +Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml. Required properties: @@ -203,7 +203,7 @@ It is possible to setup an overheat interrupt by giving at least one critical point to any subnode of the thermal-zone node. For common binding part and usage, refer to -Documentation/devicetree/bindings/thermal/thermal.txt +Documentation/devicetree/bindings/thermal/thermal*.yaml Required properties: - compatible: must be one of: diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml new file mode 100644 index 000000000000..8960fb8b2b2f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Alleycat5/5X Platforms + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Alleycat5 (98DX25xx) Reference Design + items: + - enum: + - marvell,rd-ac5 + - const: marvell,ac5 + + - description: Alleycat5X (98DX35xx) Reference Design + items: + - enum: + - marvell,rd-ac5x + - const: marvell,ac5x + - const: marvell,ac5 + +additionalProperties: true + +... |