diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/health')
-rw-r--r-- | Documentation/devicetree/bindings/iio/health/max30100.txt | 4 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/iio/health/max30102.txt | 10 |
2 files changed, 9 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt index 295a9edfa4fd..8d8176459d09 100644 --- a/Documentation/devicetree/bindings/iio/health/max30100.txt +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -20,9 +20,9 @@ Optional properties: Example: -max30100@057 { +max30100@57 { compatible = "maxim,max30100"; - reg = <57>; + reg = <0x57>; maxim,led-current-microamp = <24000 50000>; interrupt-parent = <&gpio1>; interrupts = <16 2>; diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt index c695e7cbeefb..ef2ca0a0306f 100644 --- a/Documentation/devicetree/bindings/iio/health/max30102.txt +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -1,9 +1,11 @@ Maxim MAX30102 heart rate and pulse oximeter sensor +Maxim MAX30105 optical particle-sensing module * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf +* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf Required properties: - - compatible: must be "maxim,max30102" + - compatible: must be "maxim,max30102" or "maxim,max30105" - reg: the I2C address of the sensor - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device @@ -12,15 +14,17 @@ Required properties: interrupt client node bindings. Optional properties: - - maxim,red-led-current-microamp: configuration for RED LED current + - maxim,red-led-current-microamp: configuration for red LED current - maxim,ir-led-current-microamp: configuration for IR LED current + - maxim,green-led-current-microamp: configuration for green LED current + (max30105 only) Note that each step is approximately 200 microamps, ranging from 0 uA to 50800 uA. Example: -max30100@57 { +max30102@57 { compatible = "maxim,max30102"; reg = <0x57>; maxim,red-led-current-microamp = <7000>; |