diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
627 files changed, 8589 insertions, 1145 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt index 3bc7ea575564..d54f33c4e0da 100644 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ b/Documentation/devicetree/bindings/arm/actions.txt @@ -21,9 +21,26 @@ Boards: Root node property compatible must contain, depending on board: + - Allo.com Sparky: "allo,sparky" + - Cubietech CubieBoard6: "cubietech,cubieboard6" - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" +S700 SoC +======== + +Required root node properties: + +- compatible : must contain "actions,s700" + + +Boards: + +Root node property compatible must contain, depending on board: + + - Cubietech CubieBoard7: "cubietech,cubieboard7" + + S900 SoC ======== diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4e4bc0bae597..f747f47922c5 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; +Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: + Required root node property: + compatible: "amlogic,a113d", "amlogic,meson-axg"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) @@ -71,8 +75,12 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) + - "khadas,vim2" (Meson gxm s912) - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) + - "tronsmart,vega-s96" (Meson gxm s912) + + - "amlogic,s400" (Meson axg a113d) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt new file mode 100644 index 000000000000..101dc21014ec --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt @@ -0,0 +1,20 @@ +Amlogic Meson8 and Meson8b "analog top" registers: +-------------------------------------------------- + +The analog top registers contain information about the so-called +"metal revision" (which encodes the "minor version") of the SoC. + +Required properties: +- reg: the register range of the analog top registers +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-analog-top" + - "amlogic,meson8b-analog-top" + along with "syscon" + + +Example: + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt new file mode 100644 index 000000000000..7656812b67b9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/assist.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b assist registers: +----------------------------------------------- + +The assist registers contain basic information about the SoC, +for example the encoded SoC part number. + +Required properties: +- reg: the register range of the assist registers +- compatible: should be "amlogic,meson-mx-assist" along with "syscon" + + +Example: + + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt new file mode 100644 index 000000000000..407e27f230ab --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b bootrom: +-------------------------------------- + +The bootrom register area can be used to access SoC specific +information, such as the "misc version". + +Required properties: +- reg: the register range of the bootrom registers +- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon" + + +Example: + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt new file mode 100644 index 000000000000..72f8d08198b6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt @@ -0,0 +1,18 @@ +Amlogic Meson8 and Meson8b power-management-unit: +------------------------------------------------- + +The pmu is used to turn off and on different power domains of the SoCs +This includes the power to the CPU cores. + +Required node properties: +- compatible value : depending on the SoC this should be one of: + "amlogic,meson8-pmu" + "amlogic,meson8b-pmu" +- reg : physical base address and the size of the registers window + +Example: + + pmu@c81000e4 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xc81000e0 0x18>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt new file mode 100644 index 000000000000..3473ddaadfac --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt @@ -0,0 +1,32 @@ +Amlogic Meson8 and Meson8b SRAM for smp bringup: +------------------------------------------------ + +Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. +Once the core gets powered up it executes the code that is residing at a +specific location. + +Therefore a reserved section sub-node has to be added to the mmio-sram +declaration. + +Required sub-node properties: +- compatible : depending on the SoC this should be one of: + "amlogic,meson8-smp-sram" + "amlogic,meson8b-smp-sram" + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sram.txt + +Example: + + sram: sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt new file mode 100644 index 000000000000..6efabba530f1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt @@ -0,0 +1,27 @@ +* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU) + +ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores +with a shared L3 memory system, control logic and external interfaces to +form a multicore cluster. The PMU enables to gather various statistics on +the operations of the DSU. The PMU provides independent 32bit counters that +can count any of the supported events, along with a 64bit cycle counter. +The PMU is accessed via CPU system registers and has no MMIO component. + +** DSU PMU required properties: + +- compatible : should be one of : + + "arm,dsu-pmu" + +- interrupts : Exactly 1 SPI must be listed. + +- cpus : List of phandles for the CPUs connected to this DSU instance. + + +** Example: + +dsu-pmu-0 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu_0>, <&cpu_1>; +}; diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 91cb8e4f2a4f..31220b54d85d 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -90,38 +90,6 @@ System Timer (ST) required properties: Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" -TC/TCLIB Timer required properties: -- compatible: Should be "atmel,<chip>-tcb". - <chip> can be "at91rm9200" or "at91sam9x5" -- reg: Should contain registers location and length -- interrupts: Should contain all interrupts for the TC block - Note that you can specify several interrupt cells if the TC - block has one interrupt per channel. -- clock-names: tuple listing input clock names. - Required elements: "t0_clk", "slow_clk" - Optional elements: "t1_clk", "t2_clk" -- clocks: phandles to input clocks. - -Examples: - -One interrupt per TC block: - tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb"; - reg = <0xfff7c000 0x100>; - interrupts = <18 4>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; - }; - -One interrupt per TC channel in a TC block: - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb"; - reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; - clocks = <&tcb1_clk>; - clock-names = "t0_clk"; - }; - RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" diff --git a/Documentation/devicetree/bindings/arm/axentia.txt b/Documentation/devicetree/bindings/arm/axentia.txt index ea3fb96ae465..de58f2463880 100644 --- a/Documentation/devicetree/bindings/arm/axentia.txt +++ b/Documentation/devicetree/bindings/arm/axentia.txt @@ -10,6 +10,15 @@ compatible = "axentia,linea", and following the rules from atmel-at91.txt for a sama5d31 SoC. +Nattis v2 board with Natte v2 power board +----------------------------------------- + +Required root node properties: +compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", + "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; +and following the rules from above for the axentia,linea CPU module. + + TSE-850 v3 board ---------------- diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 0d0c1ae81bed..c052caad36e8 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -17,21 +17,23 @@ Further, syscon nodes that map platform-specific registers used for general system control is required: - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon" - - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon" + - compatible: "brcm,bcm<chip_id>-cpu-biu-ctrl", + "brcm,brcmstb-cpu-biu-ctrl", + "syscon" - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon" -hif-cpubiuctrl node +cpu-biu-ctrl node ------------------- -SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit -(BIU) block which controls and interfaces the CPU complex to the different -Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block -offers a feature called Write Pairing which consists in collapsing two adjacent -cache lines into a single (bursted) write transaction towards the memory -controller (MEMC) to maximize write bandwidth. +SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a +specific Bus Interface Unit (BIU) block which controls and interfaces the CPU +complex to the different Memory Controller Ports (MCP), one per memory +controller (MEMC). This BIU block offers a feature called Write Pairing which +consists in collapsing two adjacent cache lines into a single (bursted) write +transaction towards the memory controller (MEMC) to maximize write bandwidth. Required properties: - - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon" + - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon" Optional properties: @@ -52,7 +54,7 @@ example: }; hif_cpubiuctrl: syscon@3e2400 { - compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; + compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"; reg = <0x3e2400 0x5b4>; brcm,write-pairing; }; @@ -164,6 +166,8 @@ Control registers for this memory controller's DDR PHY. Required properties: - compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" "brcm,brcmstb-ddr-phy-v225.1" "brcm,brcmstb-ddr-phy-v240.1" "brcm,brcmstb-ddr-phy-v240.2" @@ -184,7 +188,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh Power-Down (SRPD), among other things. Required properties: -- compatible : should contain "brcm,brcmstb-memc-ddr" +- compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range Example: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt new file mode 100644 index 000000000000..a124c7fc4dcd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt @@ -0,0 +1,14 @@ +Broadcom Hurricane 2 device tree bindings +--------------------------------------- + +Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs +are based on Broadcom's iProc SoC architecture and feature a single core Cortex +A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND +flash and a PCIe attached integrated switching engine. + +Boards with Hurricane SoCs shall have the following properties: + +Required root node property: + +BCM53342 +compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/arm/ccn.txt index 29801456c9ee..43b5a71a5a9d 100644 --- a/Documentation/devicetree/bindings/arm/ccn.txt +++ b/Documentation/devicetree/bindings/arm/ccn.txt @@ -15,7 +15,7 @@ Required properties: Example: - ccn@0x2000000000 { + ccn@2000000000 { compatible = "arm,ccn-504"; reg = <0x20 0x00000000 0 0x1000000>; interrupts = <0 181 4>; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index b92f12bd5244..f4a777039f03 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -169,6 +169,7 @@ described below. "arm,cortex-r5" "arm,cortex-r7" "brcm,brahma-b15" + "brcm,brahma-b53" "brcm,vulcan" "cavium,thunder" "cavium,thunder2" @@ -197,6 +198,8 @@ described below. "actions,s500-smp" "allwinner,sun6i-a31" "allwinner,sun8i-a23" + "amlogic,meson8-smp" + "amlogic,meson8b-smp" "arm,realview-smp" "brcm,bcm11351-cpu-method" "brcm,bcm23550" diff --git a/Documentation/devicetree/bindings/arm/firmware/sdei.txt b/Documentation/devicetree/bindings/arm/firmware/sdei.txt new file mode 100644 index 000000000000..ee3f0ff49889 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/firmware/sdei.txt @@ -0,0 +1,42 @@ +* Software Delegated Exception Interface (SDEI) + +Firmware implementing the SDEI functions described in ARM document number +ARM DEN 0054A ("Software Delegated Exception Interface") can be used by +Linux to receive notification of events such as those generated by +firmware-first error handling, or from an IRQ that has been promoted to +a firmware-assisted NMI. + +The interface provides a number of API functions for registering callbacks +and enabling/disabling events. Functions are invoked by trapping to the +privilege level of the SDEI firmware (specified as part of the binding +below) and passing arguments in a manner specified by the "SMC Calling +Convention (ARM DEN 0028B): + + r0 => 32-bit Function ID / return value + {r1 - r3} => Parameters + +Note that the immediate field of the trapping instruction must be set +to #0. + +The SDEI_EVENT_REGISTER function registers a callback in the kernel +text to handle the specified event number. + +The sdei node should be a child node of '/firmware' and have required +properties: + + - compatible : should contain: + * "arm,sdei-1.0" : For implementations complying to SDEI version 1.x. + + - method : The method of calling the SDEI firmware. Permitted + values are: + * "smc" : SMC #0, with the register assignments specified in this + binding. + * "hvc" : HVC #0, with the register assignments specified in this + binding. +Example: + firmware { + sdei { + compatible = "arm,sdei-1.0"; + method = "smc"; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt index 51336e5fc761..35c3c3460d17 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt +++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt @@ -14,3 +14,22 @@ following property before the previous one: Example: compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + +Power management +---------------- + +For power management (particularly DVFS and AVS), the North Bridge +Power Management component is needed: + +Required properties: +- compatible : should contain "marvell,armada-3700-nb-pm", "syscon"; +- reg : the register start and length for the North Bridge + Power Management + +Example: + +nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", "syscon"; + reg = <0x14000 0x60>; +} diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index cd977db7630c..b404d592ce58 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" + - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" + - "mediatek,mt7622-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt new file mode 100644 index 000000000000..9b8f578d5e19 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -0,0 +1,22 @@ +MediaTek AUDSYS controller +============================ + +The MediaTek AUDSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt7622-audsys", "syscon" +- #clock-cells: Must be 1 + +The AUDSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +audsys: audsys@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt index 4137196dd686..4010e37c53a0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" + - "mediatek,mt2712-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index 768f3a5bc055..6cc7840ff37a 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 The ethsys controller uses the common clk binding from @@ -19,4 +20,5 @@ ethsys: clock-controller@1b000000 { compatible = "mediatek,mt2701-ethsys", "syscon"; reg = <0 0x1b000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt index beed7b594cea..f5629d64cef2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" + - "mediatek,mt7622-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 047b11ae5f45..868bd51a98be 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 58d58e2006b8..566f153f9f83 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -8,7 +8,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" + - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt new file mode 100644 index 000000000000..2df799cd06a7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt @@ -0,0 +1,22 @@ +Mediatek jpgdecsys controller +============================ + +The Mediatek jpgdecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2712-jpgdecsys", "syscon" +- #clock-cells: Must be 1 + +The jpgdecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt new file mode 100644 index 000000000000..b8fb03f3613e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt @@ -0,0 +1,22 @@ +Mediatek mcucfg controller +============================ + +The Mediatek mcucfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mcucfg", "syscon" +- #clock-cells: Must be 1 + +The mcucfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt new file mode 100644 index 000000000000..859e67b416d5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -0,0 +1,22 @@ +Mediatek mfgcfg controller +============================ + +The Mediatek mfgcfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mfgcfg", "syscon" +- #clock-cells: Must be 1 + +The mfgcfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 70529e0b58e9..4eb8bbe15c01 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt new file mode 100644 index 000000000000..d5d5f1227665 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -0,0 +1,22 @@ +MediaTek PCIESYS controller +============================ + +The MediaTek PCIESYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-pciesys", "syscon" +- #clock-cells: Must be 1 + +The PCIESYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +pciesys: pciesys@1a100800 { + compatible = "mediatek,mt7622-pciesys", "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index e494366782aa..fb58ca8c2770 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -8,6 +8,8 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt2712-pericfg", "syscon" + - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt new file mode 100644 index 000000000000..d113b8e741f3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -0,0 +1,22 @@ +MediaTek SGMIISYS controller +============================ + +The MediaTek SGMIISYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-sgmiisys", "syscon" +- #clock-cells: Must be 1 + +The SGMIISYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +sgmiisys: sgmiisys@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt new file mode 100644 index 000000000000..00760019da00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -0,0 +1,22 @@ +MediaTek SSUSBSYS controller +============================ + +The MediaTek SSUSBSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-ssusbsys", "syscon" +- #clock-cells: Must be 1 + +The SSUSBSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ssusbsys: ssusbsys@1a000000 { + compatible = "mediatek,mt7622-ssusbsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index ec93ecbb9f3c..24014a7e2332 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" + - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" + - "mediatek,mt7622-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index d150104f928a..ea40d05089f8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 8a93be643647..851545357e94 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -6,6 +6,7 @@ The Mediatek vencsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt2712-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index bb5727ae004a..ecb360ed0e33 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -49,7 +49,7 @@ An interrupt consumer on an SoC using crossbar will use: interrupts = <GIC_SPI request_number interrupt_level> Example: - device_x@0x4a023000 { + device_x@4a023000 { /* Crossbar 8 used */ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; ... diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index 3a4e5901ce31..ce8dabf8c0f9 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-scm" "ti,omap4-scm-core" "ti,omap4-scm-padconf-core" + "ti,omap4-scm-wkup" + "ti,omap4-scm-padconf-wkup" "ti,omap5-scm-core" "ti,omap5-scm-padconf-core" "ti,dra7-scm-core" diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt index 13d755787b4f..95839e19ae92 100644 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ b/Documentation/devicetree/bindings/arm/realtek.txt @@ -12,6 +12,8 @@ Required root node properties: Root node property compatible must contain, depending on board: + - MeLE V9: "mele,v9" + - ProBox2 AVA: "probox2,ava" - Zidoo X9S: "zidoo,x9s" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index b003148e2945..326d24bca1a9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,9 @@ Rockchip platforms device tree bindings --------------------------------------- +- Amarula Vyasa RK3288 board + Required root node properties: + - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + - Asus Tinker board Required root node properties: - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index ccaaec6014bd..6c49db7f8ad2 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -55,7 +55,7 @@ Note: child nodes can be added for auto probing from device tree. Example: adding device info in dtsi file -adc: adc@12D10000 { +adc: adc@12d10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; interrupts = <0 106 0>; @@ -71,7 +71,7 @@ adc: adc@12D10000 { Example: adding device info in dtsi file for Exynos3250 with additional sclk -adc: adc@126C0000 { +adc: adc@126c0000 { compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; reg = <0x126C0000 0x100>; interrupts = <0 137 0>; @@ -87,7 +87,7 @@ adc: adc@126C0000 { Example: Adding child nodes in dts file -adc@12D10000 { +adc@12d10000 { /* NTC thermistor is a hwmon device */ ncp15wb473@0 { diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index bf5fc59a6938..779f5614bcee 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -4,7 +4,6 @@ Properties: - compatible : should contain two values. First value must be one from following list: - "samsung,exynos3250-pmu" - for Exynos3250 SoC, - "samsung,exynos4210-pmu" - for Exynos4210 SoC, - - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5260-pmu" - for Exynos5260 SoC. @@ -62,7 +61,7 @@ pmu_system_controller: system-controller@10040000 { Example of clock consumer : -usb3503: usb3503@08 { +usb3503: usb3503@8 { /* ... */ clock-names = "refclk"; clocks = <&pmu_system_controller 0>; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 3c551894f621..469ac98ecf8f 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -57,6 +57,7 @@ Required root node properties: - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4. + - "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1. * Insignal - "insignal,arndale" - for Exynos5250-based Insignal Arndale board. @@ -71,7 +72,7 @@ Optional nodes: - compatible: only "samsung,secure-firmware" is currently supported - reg: address of non-secure SYSRAM used for communication with firmware - firmware@0203F000 { + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index ae75cb3b1331..5c3af7ef0761 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ SoCs: compatible = "renesas,r8a7795" - R-Car M3-W (R8A77960) compatible = "renesas,r8a7796" + - R-Car V3M (R8A77970) + compatible = "renesas,r8a77970" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" @@ -57,6 +59,8 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Draak (RTP0RC77995SEB0010S) compatible = "renesas,draak", "renesas,r8a77995" + - Eagle (RTP0RC77970SEB0010S) + compatible = "renesas,eagle", "renesas,r8a77970" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -65,7 +69,7 @@ Boards: compatible = "renesas,gose", "renesas,r8a7793" - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795" - Henninger compatible = "renesas,henninger", "renesas,r8a7791" - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) @@ -76,6 +80,8 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - Kingfisher (SBEV-RCAR-KF-M03) + compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) compatible = "renesas,koelsch", "renesas,r8a7791" - Kyoto Microcomputer Co. KZM-A9-Dual @@ -85,7 +91,7 @@ Boards: - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -93,17 +99,21 @@ Boards: - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796"; + compatible = "renesas,salvator-x", "renesas,r8a7796" - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795"; + compatible = "renesas,salvator-xs", "renesas,r8a7795" + - Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) + compatible = "renesas,salvator-xs", "renesas,r8a7796" - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" - SK-RZG1E (YR8A77450S000BE) compatible = "renesas,sk-rzg1e", "renesas,r8a7745" - SK-RZG1M (YR8A77430S000BE) compatible = "renesas,sk-rzg1m", "renesas,r8a7743" + - V3MSK + compatible = "renesas,v3msk", "renesas,r8a77970" - Wheat compatible = "renesas,wheat", "renesas,r8a7792" diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 6808fb5dee40..1b2ab1ff5587 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -33,7 +33,7 @@ Required properties: property with the highest frequency Example: - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt new file mode 100644 index 000000000000..93372f2a7df9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spe-pmu.txt @@ -0,0 +1,20 @@ +* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +ARMv8.2 introduces the optional Statistical Profiling Extension for collecting +performance sample data using an in-memory trace buffer. + +** SPE Required properties: + +- compatible : should be one of: + "arm,statistical-profiling-extension-v1" + +- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where + SPE is only supported on a subset of the CPUs, please consult + the arm,gic-v3 binding for details on describing a PPI partition. + +** Example: + +spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>; +}; diff --git a/Documentation/devicetree/bindings/arm/stm32.txt b/Documentation/devicetree/bindings/arm/stm32.txt new file mode 100644 index 000000000000..05762b08a7bb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/stm32.txt @@ -0,0 +1,9 @@ +STMicroelectronics STM32 Platforms Device Tree Bindings + +Each device tree must specify which STM32 SoC it uses, +using one of the following compatible strings: + + st,stm32f429 + st,stm32f469 + st,stm32f746 + st,stm32h743 diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index d2c46449b4eb..e4beec3d9ad3 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,6 +14,8 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 + allwinner-sun8i-r40 + allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/technologic.txt b/Documentation/devicetree/bindings/arm/technologic.txt index 33797acad846..f1cedc00dcab 100644 --- a/Documentation/devicetree/bindings/arm/technologic.txt +++ b/Documentation/devicetree/bindings/arm/technologic.txt @@ -1,6 +1,11 @@ Technologic Systems Platforms Device Tree Bindings -------------------------------------------------- +TS-4600 is a System-on-Module based on the Freescale i.MX28 System-on-Chip. +It can be mounted on a carrier board providing additional peripheral connectors. +Required root node properties: + - compatible = "technologic,imx28-ts4600", "fsl,imx28" + TS-4800 board Required root node properties: - compatible = "technologic,imx51-ts4800", "fsl,imx51"; @@ -10,3 +15,9 @@ It can be mounted on a carrier board providing additional peripheral connectors. Required root node properties: - compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl" - compatible = "technologic,imx6q-ts4900", "fsl,imx6q" + +TS-7970 is a System-on-Module based on the Freescale i.MX6 System-on-Chip. +It can be mounted on a carrier board providing additional peripheral connectors. +Required root node properties: + - compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl" + - compatible = "technologic,imx6q-ts7970", "fsl,imx6q" diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt index 866d93421eba..f9632bacbd04 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt @@ -8,7 +8,7 @@ Required properties: - interrupts : Should contain MC General interrupt. Example: - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 00318d083c9e..50095802fb4a 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -37,7 +37,7 @@ Example: compatible = "arm,vexpress-sysreg"; reg = <0x10000000 0x1000>; - v2m_led_gpios: sys_led@08 { + v2m_led_gpios: sys_led@8 { compatible = "arm,vexpress-sysreg,sys_led"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt index 7ca8b976c13a..7561cc4de371 100644 --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt @@ -5,6 +5,36 @@ Required properties: - compatible: Compatibility string. Must be 'ceva,ahci-1v84'. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. + - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0. + - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>; + CINMP : COMINIT Negate Minimum Period. + CIBGN : COMINIT Burst Gap Nominal. + CIBGMX: COMINIT Burst Gap Maximum. + CIBGMN: COMINIT Burst Gap Minimum. + - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0. + - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>; + CWBGMN: COMWAKE Burst Gap Minimum. + CWBGMX: COMWAKE Burst Gap Maximum. + CWBGN: COMWAKE Burst Gap Nominal. + CWNMP: COMWAKE Negate Minimum Period. + - ceva,p0-burst-params: Burst timing value for COM parameter for port 0. + - ceva,p1-burst-params: Burst timing value for COM parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>; + BMX: COM Burst Maximum. + BNM: COM Burst Nominal. + SFD: Signal Failure Detection value. + PTST: Partial to Slumber timer value. + - ceva,p0-retry-params: Retry interval timing value for port 0. + - ceva,p1-retry-params: Retry interval timing value for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-retry-params = /bits/ 16 <RIT RCT>; + RIT: Retry Interval Timer. + RCT: Rate Change Timer. Optional properties: - ceva,broken-gen2: limit to gen1 speed instead of gen2. @@ -16,5 +46,14 @@ Examples: interrupt-parent = <&gic>; interrupts = <0 133 4>; clocks = <&clkc SATA_CLK_ID>; + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; ceva,broken-gen2; }; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index fedc213b5f1a..c760ecb81381 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -56,7 +56,7 @@ Examples: interrupts = <115>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt index fa511db18408..a3d14719e478 100644 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ b/Documentation/devicetree/bindings/ata/imx-sata.txt @@ -25,7 +25,7 @@ Optional properties: Examples: -sata@02200000 { +sata@2200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/misc/arm-charlcd.txt b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt index e28e2aac47f1..e28e2aac47f1 100644 --- a/Documentation/devicetree/bindings/misc/arm-charlcd.txt +++ b/Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 6630d842c7a3..683eaf3aed79 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -61,7 +61,7 @@ Timing property for child nodes. It is mandatory, not optional. Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: - weim: weim@021b8000 { + weim: weim@21b8000 { compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; clocks = <&clks 196>; diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt index 3dd28343b6ce..eb3ed628c6f1 100644 --- a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt +++ b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt @@ -28,7 +28,7 @@ which can normally be found in the datasheet. Example: - rsb@01f03400 { + rsb@1f03400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt new file mode 100644 index 000000000000..2957a9ae291f --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -0,0 +1,130 @@ +Texas Instruments sysc interconnect target module wrapper binding + +Texas Instruments SoCs can have a generic interconnect target module +hardware for devices connected to various interconnects such as L3 +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc +is mostly used for interaction between module and PRCM. It participates +in the OCP Disconnect Protocol but other than that is mostly independent +of the interconnect. + +Each interconnect target module can have one or more devices connected to +it. There is a set of control registers for managing interconnect target +module clocks, idle modes and interconnect level resets for the module. + +These control registers are sprinkled into the unused register address +space of the first child device IP block managed by the interconnect +target module and typically are named REVISION, SYSCONFIG and SYSSTATUS. + +Required standard properties: + +- compatible shall be one of the following generic types: + + "ti,sysc" + "ti,sysc-omap2" + "ti,sysc-omap4" + "ti,sysc-omap4-simple" + + or one of the following derivative types for hardware + needing special workarounds: + + "ti,sysc-omap2-timer" + "ti,sysc-omap4-timer" + "ti,sysc-omap3430-sr" + "ti,sysc-omap3630-sr" + "ti,sysc-omap4-sr" + "ti,sysc-omap3-sham" + "ti,sysc-omap-aes" + "ti,sysc-mcasp" + "ti,sysc-usb-host-fs" + +- reg shall have register areas implemented for the interconnect + target module in question such as revision, sysc and syss + +- reg-names shall contain the register names implemented for the + interconnect target module in question such as + "rev, "sysc", and "syss" + +- ranges shall contain the interconnect target module IO range + available for one or more child device IP blocks managed + by the interconnect target module, the ranges may include + multiple ranges such as device L4 range for control and + parent L3 range for DMA access + +Optional properties: + +- ti,sysc-mask shall contain mask of supported register bits for the + SYSCONFIG register as documented in the Technical Reference + Manual (TRM) for the interconnect target module + +- ti,sysc-midle list of master idle modes supported by the interconnect + target module as documented in the TRM for SYSCONFIG + register MIDLEMODE bits + +- ti,sysc-sidle list of slave idle modes supported by the interconnect + target module as documented in the TRM for SYSCONFIG + register SIDLEMODE bits + +- ti,sysc-delay-us delay needed after OCP softreset before accssing + SYSCONFIG register again + +- ti,syss-mask optional mask of reset done status bits as described in the + TRM for SYSSTATUS registers, typically 1 with some devices + having separate reset done bits for children like OHCI and + EHCI + +- clocks clock specifier for each name in the clock-names as + specified in the binding documentation for ti-clkctrl, + typically available for all interconnect targets on TI SoCs + based on omap4 except if it's read-only register in hwauto + mode as for example omap4 L4_CFG_CLKCTRL + +- clock-names should contain at least "fck", and optionally also "ick" + depending on the SoC and the interconnect target module + +- ti,hwmods optional TI interconnect module name to use legacy + hwmod platform data + +- ti,no-reset-on-init interconnect target module should not be reset at init + +- ti,no-idle-on-init interconnect target module should not be idled at init + +Example: Single instance of MUSB controller on omap4 using interconnect ranges +using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + + usb_otg_hs: otg@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + usb-phy = <&usb2_phy>; + ... + }; + }; + +Note that other SoCs, such as am335x can have multipe child devices. On am335x +there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA +instance as children of a single interconnet target module. diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt new file mode 100644 index 000000000000..2a10d065b9fa --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt @@ -0,0 +1,50 @@ +Technologic Systems NBUS + +The NBUS is a bus used to interface with peripherals in the Technologic +Systems FPGA on the TS-4600 SoM. + +Required properties : + - compatible : "technologic,ts-nbus" + - #address-cells : must be 1 + - #size-cells : must be 0 + - pwms : The PWM bound to the FPGA + - ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA + - ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA + - ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA + - ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA + - ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA + - ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA + +Child nodes: + +The NBUS node can contain zero or more child nodes representing peripherals +on the bus. + +Example: + + nbus { + compatible = "technologic,ts-nbus"; + pinctrl-0 = <&nbus_pins>; + #address-cells = <1>; + #size-cells = <0>; + pwms = <&pwm 2 83>; + ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH + &gpio0 1 GPIO_ACTIVE_HIGH + &gpio0 2 GPIO_ACTIVE_HIGH + &gpio0 3 GPIO_ACTIVE_HIGH + &gpio0 4 GPIO_ACTIVE_HIGH + &gpio0 5 GPIO_ACTIVE_HIGH + &gpio0 6 GPIO_ACTIVE_HIGH + &gpio0 7 GPIO_ACTIVE_HIGH>; + ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + + watchdog@2a { + compatible = "..."; + + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt index e3b13ea7d2ae..45e79172a646 100644 --- a/Documentation/devicetree/bindings/chosen.txt +++ b/Documentation/devicetree/bindings/chosen.txt @@ -120,3 +120,18 @@ e.g. While this property does not represent a real hardware, the address and the size are expressed in #address-cells and #size-cells, respectively, of the root node. + +linux,initrd-start and linux,initrd-end +--------------------------------------- + +These properties hold the physical start and end address of an initrd that's +loaded by the bootloader. Note that linux,initrd-start is inclusive, but +linux,initrd-end is exclusive. +e.g. + +/ { + chosen { + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; +}; diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index 924040769186..e2b377ed6f91 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -5,8 +5,11 @@ controllers within the SoC. Required Properties: -- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC, - or "amlogic,gxl-clkc" for GXL and GXM SoC. +- compatible: should be: + "amlogic,gxbb-clkc" for GXBB SoC, + "amlogic,gxl-clkc" for GXL and GXM SoC, + "amlogic,axg-clkc" for AXG SoC. + - reg: physical base address of the clock controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt index 27468119fd94..4cd81742038f 100644 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt @@ -59,7 +59,7 @@ syscon: syscon@10000000 { compatible = "syscon"; reg = <0x10000000 0x1000>; - oscclk0: osc0@0c { + oscclk0: osc0@c { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt index fb40da303d25..aca94fe9416f 100644 --- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt +++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt @@ -17,7 +17,7 @@ Optional properties: - clock-output-names : From common clock binding. Example: - clock@0xff000000 { + clock@ff000000 { compatible = "adi,axi-clkgen"; #clock-cells = <0>; reg = <0xff000000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt index 7a837d2182ac..4acfc8f641b6 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt @@ -23,7 +23,7 @@ Example: clocks = <&clk_osc>; }; - aux: aux@0x7e215004 { + aux: aux@7e215004 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; reg = <0x7e215000 0x8>; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index f2c5f0e4a363..f8e4a93466cb 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -137,6 +137,20 @@ These clock IDs are defined in: ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 +Hurricane 2 +------ +PLL and leaf clock compatible strings for Hurricane 2 are: + "brcm,hr2-armpll" + +The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + Northstar and Northstar Plus ------ PLL and leaf clock compatible strings for Northstar and Northstar Plus are: diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 0c3d6015868d..6030afb10b5c 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -33,6 +33,12 @@ Required Properties: - clock-names: Aliases for the above clocks. They should be "pll_ref", "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. +Optional Properties: + + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular @@ -80,7 +86,7 @@ Example 3: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,i2s-v5"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt index 4fc869b69d4a..f6272dcd96f4 100644 --- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt @@ -43,7 +43,7 @@ Example: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { /* ... */ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt index e3eb0f657c5e..217871f483c0 100644 --- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt @@ -21,7 +21,7 @@ Required properties: a size of 8. - #clock-cells : from common clock binding; shall be set to 1 -divider_clk: core-clock@0064 { +divider_clk: core-clock@64 { compatible = "marvell,dove-divider-clock"; reg = <0x0064 0x8>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt index f1738b88c225..7441ed519f02 100644 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -32,7 +32,7 @@ Example 1: Examples of clock controller nodes are listed below. #clock-cells = <1>; }; - cmu_dmc: clock-controller@105C0000 { + cmu_dmc: clock-controller@105c0000 { compatible = "samsung,exynos3250-cmu-dmc"; reg = <0x105C0000 0x2000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index f5a5b19ed3b2..17bb11365354 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -24,7 +24,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10030000 { + clock: clock-controller@10030000 { compatible = "samsung,exynos4210-clock"; reg = <0x10030000 0x20000>; #clock-cells = <1>; @@ -41,3 +41,46 @@ Example 2: UART controller node that consumes the clock generated by the clock clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; + +Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP) +subsystem. Registers for those clocks are located in the ISP power domain. +Because those registers are also located in a different memory region than +the main clock controller, a separate clock controller has to be defined for +handling them. + +Required Properties: + +- compatible: should be "samsung,exynos4412-isp-clock". + +- reg: physical base address of the ISP clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings, should point to CLK_ACLK200 and + CLK_ACLK400_MCUISP clocks from the main clock controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt, should be "aclk200" and + "aclk400_mcuisp". + +- power-domains: a phandle to ISP power domain node as described by + generic PM domain bindings. + +Example 3: The clock controllers bindings for Exynos4412 SoCs. + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 536eacd1063f..aff266a12eeb 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -22,7 +22,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5250-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt index 5496b2fac483..c79d31f7f66e 100644 --- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt @@ -180,7 +180,7 @@ Example 2: UART controller node that consumes the clock generated by the peri clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. - serial@12C00000 { + serial@12c00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 146 0>; diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt index 4527de3ea205..217beb27c30e 100644 --- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt @@ -30,7 +30,7 @@ Example 1: An example of a clock controller node is listed below. #clock-cells = <0>; }; - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5410-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; @@ -41,7 +41,7 @@ Example 2: UART controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. - serial@12C20000 { + serial@12c20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt index d54f42cf0440..717a7b1531c7 100644 --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt @@ -23,7 +23,7 @@ tree sources. Example 1: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5420-clock"; reg = <0x10010000 0x30000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index fe885abc9cb4..50d5897c9849 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -168,6 +168,11 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 +Optional properties: + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -451,12 +466,13 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; }; Example 3: UART controller node that consumes the clock generated by the clock controller. - serial_0: serial@14C10000 { + serial_0: serial@14c10000 { compatible = "samsung,exynos5433-uart"; reg = <0x14C10000 0x100>; interrupts = <0 421 0>; diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt index 5f7005f73058..c7d227c31e95 100644 --- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt @@ -21,7 +21,7 @@ tree sources. Example: An example of a clock controller node is listed below. - clock: clock-controller@0x10010000 { + clock: clock-controller@10010000 { compatible = "samsung,exynos5440-clock"; reg = <0x160000 0x10000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt index 0035a7ecaf20..946da7cee54f 100644 --- a/Documentation/devicetree/bindings/clock/hi3660-clock.txt +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -13,12 +13,18 @@ Required Properties: - "hisilicon,hi3660-pmuctrl" - "hisilicon,hi3660-sctrl" - "hisilicon,hi3660-iomcu" + - "hisilicon,hi3660-stub-clk" - reg: physical base address of the controller and length of memory mapped region. - #clock-cells: should be 1. +Optional Properties: + +- mboxes: Phandle to the mailbox for sending message to MCU. + (See: ../mailbox/hisilicon,hi3660-mailbox.txt for more info) + Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt index b7adf4e3ea98..9823baf7acb6 100644 --- a/Documentation/devicetree/bindings/clock/imx1-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt @@ -10,13 +10,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h for the full list of i.MX1 clock IDs. Examples: - clks: ccm@0021b000 { + clks: ccm@21b000 { #clock-cells = <1>; compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; }; - pwm: pwm@00208000 { + pwm: pwm@208000 { #pwm-cells = <2>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index aa0a4d423ef5..a45ca67a9d5f 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -14,14 +14,14 @@ Examples: #include <dt-bindings/clock/imx6qdl-clock.h> -clks: ccm@020c4000 { +clks: ccm@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; }; -uart1: serial@02020000 { +uart1: serial@2020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 8398a3a5e106..3472b461ca93 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -46,7 +46,7 @@ Example: /* ... */ Node of the MFD chip - max77686: max77686@09 { + max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; @@ -71,7 +71,7 @@ Example: /* ... */ Node of the MFD chip - max77802: max77802@09 { + max77802: max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt new file mode 100644 index 000000000000..e3fa8118eaee --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt @@ -0,0 +1,22 @@ +Qualcomm MSM8916 A53 PLL Binding +-------------------------------- +The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies +above 1GHz. + +Required properties : +- compatible : Shall contain only one of the following: + + "qcom,msm8916-a53pll" + +- reg : shall contain base register location and length + +- #clock-cells : must be set to <0> + +Example: + + a53pll: clock@b016000 { + compatible = "qcom,msm8916-a53pll"; + reg = <0xb016000 0x40>; + #clock-cells = <0>; + }; + diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index a7235e9e1c97..4491d1c104aa 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -10,12 +10,23 @@ Required properties : - compatible : shall contain only one of the following. The generic compatible "qcom,rpmcc" should be also included. + "qcom,rpmcc-msm8660", "qcom,rpmcc" + "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" - #clock-cells : shall contain 1 +The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> +and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock +is an "active" clock, which means that the consumer only care that the +clock is available when the apps CPU subsystem is active, i.e. not +suspended or in deep idle. If it is important that the clock keeps running +during system suspend, you need to specify the non-active clock, the one +not containing *_A_* in the enumerator name. + Example: smd { compatible = "qcom,smd"; diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt new file mode 100644 index 000000000000..7474aba36607 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt @@ -0,0 +1,59 @@ +Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv) + +clkdiv configures the clock frequency of a set of outputs on the PMIC. +These clocks are typically wired through alternate functions on +gpio pins. + +======================= +Properties +======================= + +- compatible + Usage: required + Value type: <string> + Definition: must be "qcom,spmi-clkdiv". + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: base address of CLKDIV peripherals. + +- qcom,num-clkdivs + Usage: required + Value type: <u32> + Definition: number of CLKDIV peripherals. + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the xo clock. + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "xo". + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: shall contain 1. + +======= +Example +======= + +pm8998_clk_divs: clock-controller@5b00 { + compatible = "qcom,spmi-clkdiv"; + reg = <0x5b00>; + #clock-cells = <1>; + qcom,num-clkdivs = <3>; + clocks = <&xo_board>; + clock-names = "xo"; + + assigned-clocks = <&pm8998_clk_divs 1>, + <&pm8998_clk_divs 2>, + <&pm8998_clk_divs 3>; + assigned-clock-rates = <9600000>, + <9600000>, + <9600000>; +}; diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index 6498e1fdbb33..97f46adac85f 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -78,6 +78,7 @@ second cell is the clock index for the specified type. 2 hwaccel index (n in CLKCGnHWACSR) 3 fman 0 for fm1, 1 for fm2 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 + 4=pll/5, 5=pll/6, 6=pll/7, 7=pll/8 5 coreclk must be 0 3. Example diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 316e13686568..f1890d0777a6 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -22,6 +22,7 @@ Required Properties: - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) + - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - reg: Base address and length of the memory resource used by the CPG/MSSR @@ -31,8 +32,8 @@ Required Properties: clock-names - clock-names: List of external parent clock names. Valid names are: - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, - r8a7795, r8a7796, r8a77995) - - "extalr" (r8a7795, r8a7796) + r8a7795, r8a7796, r8a77970, r8a77995) + - "extalr" (r8a7795, r8a7796, r8a77970) - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb5d942075fb..8ff3e2774ed8 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -1,6 +1,6 @@ -* Renesas RZ Clock Pulse Generator (CPG) +* Renesas RZ/A1 Clock Pulse Generator (CPG) -The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable +The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable CPU and GPU clocks, and several fixed ratio dividers. The CPG also provides a Clock Domain for SoC devices, in combination with the CPG Module Stop (MSTP) Clocks. diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt index a6c4ef343b44..f00191cad8cd 100644 --- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt +++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt @@ -49,6 +49,7 @@ Optional child node properties: - silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth divider. - silabs,pll-master: boolean, multisynth can change pll frequency. +- silabs,pll-reset: boolean, clock output can reset its pll. - silabs,disable-state : clock output disable state, shall be 0 = clock output is driven LOW when disabled 1 = clock output is driven HIGH when disabled diff --git a/Documentation/devicetree/bindings/clock/sprd.txt b/Documentation/devicetree/bindings/clock/sprd.txt new file mode 100644 index 000000000000..e9d179e882d9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sprd.txt @@ -0,0 +1,63 @@ +Spreadtrum Clock Binding +------------------------ + +Required properties: +- compatible: should contain the following compatible strings: + - "sprd,sc9860-pmu-gate" + - "sprd,sc9860-pll" + - "sprd,sc9860-ap-clk" + - "sprd,sc9860-aon-prediv" + - "sprd,sc9860-apahb-gate" + - "sprd,sc9860-aon-gate" + - "sprd,sc9860-aonsecure-clk" + - "sprd,sc9860-agcp-gate" + - "sprd,sc9860-gpu-clk" + - "sprd,sc9860-vsp-clk" + - "sprd,sc9860-vsp-gate" + - "sprd,sc9860-cam-clk" + - "sprd,sc9860-cam-gate" + - "sprd,sc9860-disp-clk" + - "sprd,sc9860-disp-gate" + - "sprd,sc9860-apapb-gate" + +- #clock-cells: must be 1 + +- clocks : Should be the input parent clock(s) phandle for the clock, this + property here just simply shows which clock group the clocks' + parents are in, since each clk node would represent many clocks + which are defined in the driver. The detailed dependency + relationship (i.e. how many parents and which are the parents) + are implemented in driver code. + +Optional properties: + +- reg: Contain the registers base address and length. It must be configured + only if no 'sprd,syscon' under the node. + +- sprd,syscon: phandle to the syscon which is in the same address area with + the clock, and so we can get regmap for the clocks from the + syscon device. + +Example: + + pmu_gate: pmu-gate { + compatible = "sprd,sc9860-pmu-gate"; + sprd,syscon = <&pmu_regs>; + clocks = <&ext_26m>; + #clock-cells = <1>; + }; + + pll: pll { + compatible = "sprd,sc9860-pll"; + sprd,syscon = <&ana_regs>; + clocks = <&pmu_gate 0>; + #clock-cells = <1>; + }; + + ap_clk: clock-controller@20000000 { + compatible = "sprd,sc9860-ap-clk"; + reg = <0 0x20000000 0 0x400>; + clocks = <&ext_26m>, <&pll 0>, + <&pmu_gate 0>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index c35390f60545..7364953d0d0b 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -42,7 +42,7 @@ Required properties: Example: - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt index 631d27cd89d6..f2fa87c4765c 100644 --- a/Documentation/devicetree/bindings/clock/sun8i-de2.txt +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -4,13 +4,14 @@ Allwinner Display Engine 2.0 Clock Control Binding Required properties : - compatible: must contain one of the following compatibles: - "allwinner,sun8i-a83t-de2-clk" + - "allwinner,sun8i-h3-de2-clk" - "allwinner,sun8i-v3s-de2-clk" - "allwinner,sun50i-h5-de2-clk" - reg: Must contain the registers base address and length - clocks: phandle to the clocks feeding the display engine subsystem. Three are needed: - - "mod": the display engine module clock + - "mod": the display engine module clock (on A83T it's the DE PLL) - "bus": the bus clock for the whole display engine subsystem - clock-names: Must contain the clock names described just above - resets: phandle to the reset control for the display engine subsystem. @@ -19,7 +20,7 @@ Required properties : Example: de2_clocks: clock@1000000 { - compatible = "allwinner,sun8i-a83t-de2-clk"; + compatible = "allwinner,sun8i-h3-de2-clk"; reg = <0x01000000 0x100000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 7eda08eb8a1e..4ca21c3a6fc9 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -36,7 +36,7 @@ For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: - "iosc": the SoC's internal frequency oscillator Example for generic CCU: -ccu: clock@01c20000 { +ccu: clock@1c20000 { compatible = "allwinner,sun8i-h3-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -46,7 +46,7 @@ ccu: clock@01c20000 { }; Example for PRCM CCU: -r_ccu: clock@01f01400 { +r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 8f7619d8c8d8..1a042e20b115 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -137,7 +137,7 @@ the address block, which is related to the overall mmc block. For example: -osc24M: clk@01c20050 { +osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; reg = <0x01c20050 0x4>; @@ -145,7 +145,7 @@ osc24M: clk@01c20050 { clock-output-names = "osc24M"; }; -pll1: clk@01c20000 { +pll1: clk@1c20000 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; reg = <0x01c20000 0x4>; @@ -153,7 +153,7 @@ pll1: clk@01c20000 { clock-output-names = "pll1"; }; -pll5: clk@01c20020 { +pll5: clk@1c20020 { #clock-cells = <1>; compatible = "allwinner,sun4i-pll5-clk"; reg = <0x01c20020 0x4>; @@ -161,7 +161,7 @@ pll5: clk@01c20020 { clock-output-names = "pll5_ddr", "pll5_other"; }; -pll6: clk@01c20028 { +pll6: clk@1c20028 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; @@ -169,7 +169,7 @@ pll6: clk@01c20028 { clock-output-names = "pll6", "pll6x2"; }; -cpu: cpu@01c20054 { +cpu: cpu@1c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; reg = <0x01c20054 0x4>; @@ -177,7 +177,7 @@ cpu: cpu@01c20054 { clock-output-names = "cpu"; }; -mmc0_clk: clk@01c20088 { +mmc0_clk: clk@1c20088 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; @@ -199,7 +199,7 @@ gmac_int_tx_clk: clk@3 { clock-output-names = "gmac_int_tx"; }; -gmac_clk: clk@01c20164 { +gmac_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; @@ -211,7 +211,7 @@ gmac_clk: clk@01c20164 { clock-output-names = "gmac"; }; -mmc_config_clk: clk@01c13000 { +mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ahb0_gates 8>; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt index 616836e7e1e2..959d96632f5d 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt @@ -25,7 +25,7 @@ Example: }; }; ... - i2c0: i2c-master@0d090000 { + i2c0: i2c-master@d090000 { ... cdce706: clock-synth@69 { compatible = "ti,cdce706"; diff --git a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt index 3e6a81e99804..c35cb6c4af4d 100644 --- a/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt +++ b/Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt @@ -14,7 +14,7 @@ Required properties: Example: -pllctrl: pll-controller@0x02310000 { +pllctrl: pll-controller@02310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt index e85ecb510d56..5c91c9e4f1be 100644 --- a/Documentation/devicetree/bindings/clock/zx296702-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -20,13 +20,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h for the full list of zx296702 clock IDs. -topclk: topcrm@0x09800000 { +topclk: topcrm@09800000 { compatible = "zte,zx296702-topcrm-clk"; reg = <0x09800000 0x1000>; #clock-cells = <1>; }; -uart0: serial@0x09405000 { +uart0: serial@09405000 { compatible = "zte,zx296702-uart"; reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index 697714f8d75c..a3448bfa1c82 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -1,4 +1,8 @@ Common properties +================= + +Endianness +---------- The Devicetree Specification does not define any properties related to hardware byteswapping, but endianness issues show up frequently in porting Linux to @@ -58,3 +62,25 @@ dev: dev@40031000 { ... little-endian; }; + +Daisy-chained devices +--------------------- + +Many serially-attached GPIO and IIO devices are daisy-chainable. To the +host controller, a daisy-chain appears as a single device, but the number +of inputs and outputs it provides is the sum of inputs and outputs provided +by all of its devices. The driver needs to know how many devices the +daisy-chain comprises to determine the amount of data exchanged, how many +inputs and outputs to register and so on. + +Optional properties: + - #daisy-chained-devices: Number of devices in the daisy-chain (default is 1). + +Example: +gpio@0 { + compatible = "name"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + #daisy-chained-devices = <3>; +}; diff --git a/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt new file mode 100644 index 000000000000..cec8d5d74e26 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/arm-cryptocell.txt @@ -0,0 +1,22 @@ +Arm TrustZone CryptoCell cryptographic engine + +Required properties: +- compatible: Should be "arm,cryptocell-712-ree". +- reg: Base physical address of the engine and length of memory mapped region. +- interrupts: Interrupt number for the device. + +Optional properties: +- interrupt-parent: The phandle for the interrupt controller that services + interrupts for this device. +- clocks: Reference to the crypto engine clock. +- dma-coherent: Present if dma operations are coherent. + +Examples: + + arm_cc712: crypto@80000000 { + compatible = "arm,cryptocell-712-ree"; + interrupt-parent = <&intc>; + interrupts = < 0 30 4 >; + reg = < 0x80000000 0x10000 >; + + }; diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt index 7de1a9674c70..6b458bb2440d 100644 --- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt +++ b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt @@ -75,7 +75,7 @@ Required properties: - clock-frequency: must be present in the i2c controller node. Example: -atecc508a@C0 { +atecc508a@c0 { compatible = "atmel,atecc508a"; reg = <0xC0>; }; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index 7aef0eae58d4..76aec8a3724d 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -456,7 +456,7 @@ System ON/OFF key driver Definition: this is phandle to the register map node. EXAMPLE: - snvs-pwrkey@0x020cc000 { + snvs-pwrkey@020cc000 { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <0 4 0x4> @@ -545,7 +545,7 @@ FULL EXAMPLE interrupts = <93 2>; }; - snvs-pwrkey@0x020cc000 { + snvs-pwrkey@020cc000 { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&sec_mon>; interrupts = <0 4 0x4>; diff --git a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt index fbc07d12322f..30c3ce6b502e 100644 --- a/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt +++ b/Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt @@ -1,7 +1,8 @@ Inside Secure SafeXcel cryptographic engine Required properties: -- compatible: Should be "inside-secure,safexcel-eip197". +- compatible: Should be "inside-secure,safexcel-eip197" or + "inside-secure,safexcel-eip97". - reg: Base physical address of the engine and length of memory mapped region. - interrupts: Interrupt numbers for the rings and engine. - interrupt-names: Should be "ring0", "ring1", "ring2", "ring3", "eip", "mem". diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt index 4ca8dd4d7e66..a13fbdb4bd88 100644 --- a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt @@ -2,7 +2,9 @@ Exynos Pseudo Random Number Generator Required properties: -- compatible : Should be "samsung,exynos4-rng". +- compatible : One of: + - "samsung,exynos4-rng" for Exynos4210 and Exynos4412 + - "samsung,exynos5250-prng" for Exynos5250+ - reg : Specifies base physical address and size of the registers map. - clocks : Phandle to clock-controller plus clock-specifier pair. - clock-names : "secss" as a clock name. diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.txt b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.txt new file mode 100644 index 000000000000..970487fa40b8 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.txt @@ -0,0 +1,19 @@ +* STMicroelectronics STM32 CRYP + +Required properties: +- compatible: Should be "st,stm32f756-cryp". +- reg: The address and length of the peripheral registers space +- clocks: The input clock of the CRYP instance +- interrupts: The CRYP interrupt + +Optional properties: +- resets: The input reset of the CRYP instance + +Example: +crypto@50060000 { + compatible = "st,stm32f756-cryp"; + reg = <0x50060000 0x400>; + interrupts = <79>; + clocks = <&rcc 0 STM32F7_AHB2_CLOCK(CRYP)>; + resets = <&rcc STM32F7_AHB2_RESET(CRYP)>; +}; diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt index 5d38e9b7033f..f2dc3d9bca92 100644 --- a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt +++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt @@ -14,7 +14,7 @@ Optional properties: - reset-names : must contain "ahb" Example: - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt index fd459f00aa5a..aeaebd425d1f 100644 --- a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt +++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt @@ -20,7 +20,7 @@ Optional properties: Example : NoC Probe nodes in Device Tree are listed below. - nocp_mem0_0: nocp@10CA1000 { + nocp_mem0_0: nocp@10ca1000 { compatible = "samsung,exynos5420-nocp"; reg = <0x10CA1000 0x200>; }; diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt index 001dd63979a9..148191b0fc15 100644 --- a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt +++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt @@ -9,7 +9,7 @@ Required properties: - clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon"; Example: - dfi: dfi@0xff630000 { + dfi: dfi@ff630000 { compatible = "rockchip,rk3399-dfi"; reg = <0x00 0xff630000 0x00 0x4000>; rockchip,pmu = <&pmugrf>; diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt index 7f040edc16fe..bf4a18047309 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt @@ -48,6 +48,10 @@ Required properties: Documentation/devicetree/bindings/reset/reset.txt, the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy" +Optional properties: +- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI + logic, as described in the file ../regulator/regulator.txt + Required nodes: The connections to the HDMI ports are modeled using the OF graph diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt index 00f74bad1e95..057b81335775 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt @@ -64,6 +64,10 @@ Required properties: - reg-names: should contain the names of the previous memory regions - interrupts: should contain the VENC Vsync interrupt number +Optional properties: +- power-domains: Optional phandle to associated power domain as described in + the file ../power/power_domain.txt + Required nodes: The connections to the VPU output video ports are modeled using the OF graph diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index 1a21202778ee..acb5a0132127 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -27,7 +27,7 @@ Optional properties: Example: - fb0: fb@0x00500000 { + fb0: fb@00500000 { compatible = "atmel,at91sam9g45-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 3 0>; @@ -41,7 +41,7 @@ Example: Example for fixed framebuffer memory: - fb0: fb@0x00500000 { + fb0: fb@00500000 { compatible = "atmel,at91sam9263-lcdc"; reg = <0x00700000 0x1000 0x70000000 0x200000>; [...] diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 06668bca7ffc..0047b1394c70 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -68,6 +68,8 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- clocks: from common clock binding: reference to the CEC clock. +- clock-names: from common clock binding: must be "cec". Required nodes: @@ -89,6 +91,8 @@ Example reg = <39>; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index b1a8929c2536..3a72a103a18a 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -37,7 +37,7 @@ Optional properties: Example: - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-dw-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file mode 100644 index 000000000000..88041ba23d56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt @@ -0,0 +1,49 @@ +Silicon Image SiI9234 HDMI/MHL bridge bindings + +Required properties: + - compatible : "sil,sii9234". + - reg : I2C address for TPI interface, use 0x39 + - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) + - iovcc18-supply : I/O Supply Voltage (1.8V) + - avcc12-supply : TMDS Analog Supply Voltage (1.2V) + - cvcc12-supply : Digital Core Supply Voltage (1.2V) + - interrupts, interrupt-parent: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin (active low) + - video interfaces: Device node can contain two video interface port + nodes for HDMI encoder and connector according to [1]. + - port@0 - MHL to HDMI + - port@1 - MHL to connector + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + + +Example: + sii9234@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt index ed5e0a7894ad..05176f1ae108 100644 --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt @@ -42,7 +42,7 @@ Optional properties: example: -gpu_3d: gpu@00130000 { +gpu_3d: gpu@130000 { compatible = "vivante,gc"; reg = <0x00130000 0x4000>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt index ca5204b3bc21..2fff8b406f4c 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt @@ -54,7 +54,7 @@ Video interfaces: Example: - dsi@11C80000 { + dsi@11c80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; interrupts = <0 79 0>; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt new file mode 100644 index 000000000000..82e3bc0b7485 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt @@ -0,0 +1,54 @@ +* Faraday TV Encoder TVE200 + +Required properties: + +- compatible: must be one of: + "faraday,tve200" + "cortina,gemini-tvc", "faraday,tve200" + +- reg: base address and size of the control registers block + +- interrupts: contains an interrupt specifier for the interrupt + line from the TVE200 + +- clock-names: should contain "PCLK" for the clock line clocking the + silicon and "TVE" for the 27MHz clock to the video driver + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: + +- resets: contains the reset line phandle for the block + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt + This port should have the properties: + reg = <0>; + It should have one endpoint connected to a remote endpoint where + the display is connected. + +Example: + +display-controller@6a000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port@0 { + reg = <0>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/google,goldfish-fb.txt b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt new file mode 100644 index 000000000000..751fa9f51e5d --- /dev/null +++ b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt @@ -0,0 +1,17 @@ +Android Goldfish framebuffer + +Android Goldfish framebuffer device used by Android emulator. + +Required properties: + +- compatible : should contain "google,goldfish-fb" +- reg : <registers mapping> +- interrupts : <interrupt mapping> + +Example: + + display-controller@1f008000 { + compatible = "google,goldfish-fb"; + interrupts = <0x10>; + reg = <0x1f008000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9225.txt b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt new file mode 100644 index 000000000000..a59feb52015b --- /dev/null +++ b/Documentation/devicetree/bindings/display/ilitek,ili9225.txt @@ -0,0 +1,25 @@ +Ilitek ILI9225 display panels + +This binding is for display panels using an Ilitek ILI9225 controller in SPI +mode. + +Required properties: +- compatible: "vot,v220hf01a-t", "ilitek,ili9225" +- rs-gpios: Register select signal +- reset-gpios: Reset pin + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + display@0{ + compatible = "vot,v220hf01a-t", "ilitek,ili9225"; + reg = <0>; + spi-max-frequency = <12000000>; + rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + rotation = <270>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index f79854783c2c..5bf77f6dd19d 100644 --- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt +++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -129,7 +129,7 @@ Optional properties: example: -display@di0 { +disp0 { compatible = "fsl,imx-parallel-display"; edid = [edid-data]; interface-pix-fmt = "rgb24"; diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 66a8f86e5d12..6d021e71c9cf 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -32,11 +32,11 @@ Optional properties Example: - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { /* ... */ }; - hdmi: hdmi@0120000 { + hdmi: hdmi@120000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-hdmi"; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index fa00e62e1cf6..a6671bd2c85a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -13,16 +13,16 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. - clock-names: the following clocks are required: - * "mdp_core_clk" - * "iface_clk" - * "bus_clk" - * "core_mmss_clk" - * "byte_clk" - * "pixel_clk" - * "core_clk" + * "mdp_core" + * "iface" + * "bus" + * "core_mmss" + * "byte" + * "pixel" + * "core" For DSIv2, we need an additional clock: - * "src_clk" -- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform. + * "src" +- assigned-clocks: Parents of "byte" and "pixel" for the given platform. - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. See [1] for details on clock bindings. - vdd-supply: phandle to vdd regulator device node @@ -101,7 +101,7 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: - * "iface_clk" + * "iface" - vddio-supply: phandle to vdd-io regulator device node Optional properties: @@ -123,13 +123,13 @@ Example: reg = <0xfd922800 0x200>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "bus_clk", - "byte_clk", - "core_clk", - "core_mmss_clk", - "iface_clk", - "mdp_core_clk", - "pixel_clk"; + "bus", + "byte", + "core", + "core_mmss", + "iface", + "mdp_core", + "pixel"; clocks = <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -207,7 +207,7 @@ Example: reg = <0xfd922a00 0xd4>, <0xfd922b00 0x2b0>, <0xfd922d80 0x7b>; - clock-names = "iface_clk"; + clock-names = "iface"; clocks = <&mmcc MDSS_AHB_CLK>; #clock-cells = <1>; vddio-supply = <&pma8084_l12>; diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt index e63032be5401..95ce19ca7bc5 100644 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ b/Documentation/devicetree/bindings/display/msm/edp.txt @@ -12,11 +12,11 @@ Required properties: - clocks: device clocks See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mdp_core_clk" - * "pixel_clk" - * "link_clk" + * "core" + * "iface" + * "mdp_core" + * "pixel" + * "link" - #clock-cells: The value should be 1. - vdda-supply: phandle to vdda regulator device node - lvl-vdd-supply: phandle to regulator device node which is used to supply power @@ -41,11 +41,11 @@ Example: interrupts = <12 0>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "pixel_clk", - "iface_clk", - "link_clk", - "mdp_core_clk"; + "core", + "pixel", + "iface", + "link", + "mdp_core"; clocks = <&mmcc MDSS_EDPAUX_CLK>, <&mmcc MDSS_EDPPIXEL_CLK>, diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index 2d306f402d18..5f90a40da51b 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -64,9 +64,9 @@ Example: interrupts = <GIC_SPI 79 0>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "master_iface_clk", - "slave_iface_clk"; + "core", + "master_iface", + "slave_iface"; clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, @@ -92,7 +92,7 @@ Example: <0x4a00500 0x100>; #phy-cells = <0>; power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; clocks = <&mmcc HDMI_S_AHB_CLK>; core-vdda-supply = <&pm8921_hdmi_mvs>; }; diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 30c11ea83754..1b31977a68ba 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -22,16 +22,16 @@ Required properties: Documentation/devicetree/bindings/power/power_domain.txt - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. - * "iface_clk" - * "bus_clk" - * "vsync_clk" + * "iface" + * "bus" + * "vsync" - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" MDP5: Required properties: @@ -45,10 +45,10 @@ Required properties: through MDP block - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. -- * "bus_clk" -- * "iface_clk" -- * "core_clk" -- * "vsync_clk" +- * "bus" +- * "iface" +- * "core" +- * "vsync" - ports: contains the list of output ports from MDP. These connect to interfaces that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a special case since it is a part of the MDP block itself). @@ -77,7 +77,7 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" Example: @@ -95,9 +95,9 @@ Example: clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk" + clock-names = "iface", + "bus", + "vsync" interrupts = <0 72 0>; @@ -120,10 +120,10 @@ Example: <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt new file mode 100644 index 000000000000..3d5ce6ad6ec7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.txt @@ -0,0 +1,49 @@ +Ilitek ILI9322 TFT panel driver with SPI control bus + +This is a driver for 320x240 TFT panels, accepting a variety of input +streams that get adapted and scaled to the panel. The panel output has +960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and +VCOMH outputs. + +Required properties: + - compatible: "dlink,dir-685-panel", "ilitek,ili9322" + (full system-specific compatible is always required to look up configuration) + - reg: address of the panel on the SPI bus + +Optional properties: + - vcc-supply: core voltage supply, see regulator/regulator.txt + - iovcc-supply: voltage supply for the interface input/output signals, + see regulator/regulator.txt + - vci-supply: voltage supply for analog parts, see regulator/regulator.txt + - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt + + The following optional properties only apply to RGB and YUV input modes and + can be omitted for BT.656 input modes: + + - pixelclk-active: see display/panel/display-timing.txt + - de-active: see display/panel/display-timing.txt + - hsync-active: see display/panel/display-timing.txt + - vsync-active: see display/panel/display-timing.txt + +The panel must obey the rules for a SPI slave device as specified in +spi/spi-bus.txt + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: + +panel: display@0 { + compatible = "dlink,dir-685-panel", "ilitek,ili9322"; + reg = <0>; + vcc-supply = <&vdisp>; + iovcc-supply = <&vdisp>; + vci-supply = <&vdisp>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt new file mode 100644 index 000000000000..7d8f6eeef6d9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa070mc01.txt @@ -0,0 +1,7 @@ +Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel + +Required properties: +- compatible: should be "mitsubishi,aa070mc01-ca1" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt new file mode 100644 index 000000000000..6862028e7b2e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt @@ -0,0 +1,21 @@ +Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using +a MIPI-DSI video interface. Its backlight is managed through the DSI link. + +Required properties: + - compatible: "orisetech,otm8009a" + - reg: the virtual channel number of a DSI peripheral + +Optional properties: + - reset-gpios: a GPIO spec for the reset pin (active low). + +Example: +&dsi { + ... + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.txt b/Documentation/devicetree/bindings/display/panel/panel-common.txt index ec52c472c845..557fa765adcb 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.txt +++ b/Documentation/devicetree/bindings/display/panel/panel-common.txt @@ -78,6 +78,16 @@ used for panels that implement compatible control signals. while active. Active high reset signals can be supported by inverting the GPIO specifier polarity flag. +Power +----- + +- power-supply: display panels require power to be supplied. While several + panels need more than one power supply with panel-specific constraints + governing the order and timings of the power supplies, in many cases a single + power supply is sufficient, either because the panel has a single power rail, + or because all its power rails can be driven by the same supply. In that case + the power-supply property specifies the supply powering the panel as a phandle + to a regulator. Backlight --------- diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt index b938269f841e..250850a2150b 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt @@ -32,6 +32,7 @@ Optional properties: - label: See panel-common.txt. - gpios: See panel-common.txt. - backlight: See panel-common.txt. +- power-supply: See panel-common.txt. - data-mirror: If set, reverse the bit order described in the data mappings below on all data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6. diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt new file mode 100644 index 000000000000..3f1a8392af7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt @@ -0,0 +1,24 @@ +Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) + +Required properties: + - compatible: "samsung,s6e63j0x03" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - te-gpios: a GPIO spec for the tearing effect synchronization signal + gpio pin (active high) + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt new file mode 100644 index 000000000000..aae57ef36cdd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt @@ -0,0 +1,23 @@ +Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +Required properties: +- compatible: should be "sii,43wvf1g". +- "dvdd-supply": 3v3 digital regulator. +- "avdd-supply": 5v analog regulator. + +Optional properties: +- backlight: phandle for the backlight control. + +Example: + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.txt b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.txt new file mode 100644 index 000000000000..d06644b555bd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.txt @@ -0,0 +1,41 @@ +Solomon Goldentek Display GKTW70SDAE4SE LVDS Display Panel +========================================================== + +The GKTW70SDAE4SE is a 7" WVGA TFT-LCD display panel. + +These DT bindings follow the LVDS panel bindings defined in panel-lvds.txt +with the following device-specific properties. + +Required properties: + +- compatible: Shall contain "sgd,gktw70sdae4se" and "panel-lvds", in that order. + +Example +------- + +panel { + compatible = "sgd,gktw70sdae4se", "panel-lvds"; + + width-mm = <153>; + height-mm = <86>; + + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <32000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <39>; + hfront-porch = <39>; + vback-porch = <29>; + vfront-porch = <13>; + hsync-len = <47>; + vsync-len = <2>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt index 1341bbf4aa3d..16d8ff088b7d 100644 --- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt +++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt @@ -1,7 +1,7 @@ Simple display panel Required properties: -- power-supply: regulator to provide the supply voltage +- power-supply: See panel-common.txt Optional properties: - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt new file mode 100644 index 000000000000..b25261e63a6d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tianma,tm070rvhg71.txt @@ -0,0 +1,29 @@ +Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel + +Required properties: +- compatible: should be "tianma,tm070rvhg71" +- power-supply: single regulator to provide the supply voltage +- backlight: phandle of the backlight device attached to the panel + +Required nodes: +- port: LVDS port mapping to connect this display + +This panel needs single power supply voltage. Its backlight is conntrolled +via PWM signal. + +Example: +-------- + +Example device-tree definition when connected to iMX6Q based board + + panel: panel-lvds0 { + compatible = "tianma,tm070rvhg71"; + backlight = <&backlight_lvds>; + power-supply = <®_lvds>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt new file mode 100644 index 000000000000..89826116628c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt @@ -0,0 +1,8 @@ +Toshiba 8.9" WXGA (1280x768) TFT LCD panel + +Required properties: +- compatible: should be "toshiba,lt089ac29000" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt index 7175dc3740ac..ed34253d9fb1 100644 --- a/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt +++ b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt @@ -2,7 +2,7 @@ Toppoly TD028TTEC1 Panel ======================== Required properties: -- compatible: "toppoly,td028ttec1" +- compatible: "tpo,td028ttec1" Optional properties: - label: a symbolic name for the panel @@ -14,7 +14,7 @@ Example ------- lcd-panel: td028ttec1@0 { - compatible = "toppoly,td028ttec1"; + compatible = "tpo,td028ttec1"; reg = <0>; spi-max-frequency = <100000>; spi-cpol; diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt index 4bbd1e9bf3be..cd48aba3bc8c 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.txt +++ b/Documentation/devicetree/bindings/display/renesas,du.txt @@ -3,6 +3,8 @@ Required Properties: - compatible: must be one of the following. + - "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU + - "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU @@ -27,10 +29,10 @@ Required Properties: - clock-names: Name of the clocks. This property is model-dependent. - R8A7779 uses a single functional clock. The clock doesn't need to be named. - - R8A779[0123456] use one functional clock per channel and one clock per - LVDS encoder (if available). The functional clocks must be named "du.x" - with "x" being the channel numerical index. The LVDS clocks must be - named "lvds.x" with "x" being the LVDS encoder numerical index. + - All other DU instances use one functional clock per channel and one + clock per LVDS encoder (if available). The functional clocks must be + named "du.x" with "x" being the channel numerical index. The LVDS clocks + must be named "lvds.x" with "x" being the LVDS encoder numerical index. - In addition to the functional and encoder clocks, all DU versions also support externally supplied pixel clocks. Those clocks are optional. When supplied they must be named "dclkin.x" with "x" being the input @@ -49,16 +51,18 @@ bindings specified in Documentation/devicetree/bindings/graph.txt. The following table lists for each supported model the port number corresponding to each DU output. - Port 0 Port1 Port2 Port3 + Port0 Port1 Port2 Port3 ----------------------------------------------------------------------------- - R8A7779 (H1) DPAD 0 DPAD 1 - - - R8A7790 (H2) DPAD LVDS 0 LVDS 1 - - R8A7791 (M2-W) DPAD LVDS 0 - - - R8A7792 (V2H) DPAD 0 DPAD 1 - - - R8A7793 (M2-N) DPAD LVDS 0 - - - R8A7794 (E2) DPAD 0 DPAD 1 - - - R8A7795 (H3) DPAD HDMI 0 HDMI 1 LVDS - R8A7796 (M3-W) DPAD HDMI LVDS - + R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - - + R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - - + R8A7779 (R-Car H1) DPAD 0 DPAD 1 - - + R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 - + R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - - + R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - - + R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - - + R8A7794 (R-Car E2) DPAD 0 DPAD 1 - - + R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0 + R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 - Example: R8A7795 (R-Car H3) ES2.0 DU diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 000000000000..da6939efdb43 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,99 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +the lvds panel described by + Documentation/devicetree/bindings/display/panel/simple-panel.txt + +Panel required properties: +- ports for remote LVDS output + +Panel optional properties: +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". +This describes decribed by: + Documentation/devicetree/bindings/display/panel/panel-lvds.txt + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index 5d835d9c1ba8..eeda3597011e 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt @@ -7,6 +7,7 @@ buffer to an external LCD interface. Required properties: - compatible: value should be one of the following "rockchip,rk3036-vop"; + "rockchip,rk3126-vop"; "rockchip,rk3288-vop"; "rockchip,rk3368-vop"; "rockchip,rk3366-vop"; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt index a9168ae6946c..d693b8dc9a62 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt @@ -15,6 +15,10 @@ Required properties: "de_be1-lcd1" "de_be0-lcd0-hdmi" "de_be1-lcd1-hdmi" + "mixer0-lcd0" + "mixer0-lcd0-hdmi" + "mixer1-lcd1-hdmi" + "mixer1-lcd1-tve" Example: diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt index 8c9e9f515c87..5a9ce511be88 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt @@ -78,7 +78,7 @@ chosen { stdout-path = "display0"; }; -soc@01c00000 { +soc@1c00000 { lcdc0: lcdc@1c0c000 { compatible = "allwinner,sun4i-a10-lcdc"; ... diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.txt b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt new file mode 100644 index 000000000000..f0a5090a3326 --- /dev/null +++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.txt @@ -0,0 +1,35 @@ +Sitronix ST7735R display panels + +This binding is for display panels using a Sitronix ST7735R controller in SPI +mode. + +Required properties: +- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" +- dc-gpios: Display data/command selection (D/CX) +- reset-gpios: Reset signal (RSTX) + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) +- backlight: phandle of the backlight device attached to the panel + +Example: + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + } + + ... + + display@0{ + compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; + rotation = <270>; + backlight = &backlight; + }; diff --git a/Documentation/devicetree/bindings/display/st,stih4xx.txt b/Documentation/devicetree/bindings/display/st,stih4xx.txt index a352ed30cd70..6778b3e7ad5b 100644 --- a/Documentation/devicetree/bindings/display/st,stih4xx.txt +++ b/Documentation/devicetree/bindings/display/st,stih4xx.txt @@ -119,7 +119,7 @@ Example: / { ... - vtg_main_slave: sti-vtg-main-slave@fe85A800 { + vtg_main_slave: sti-vtg-main-slave@fe85a800 { compatible = "st,vtg"; reg = <0xfe85A800 0x300>; interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt index 74b5ac7b26d6..029252253ad4 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt @@ -10,7 +10,11 @@ - "lcd" for the clock feeding the output pixel clock & IP clock. - resets: reset to be used by the device (defined by use of RCC macro). Required nodes: - - Video port for RGB output. + - Video port for DPI RGB output: ltdc has one video port with up to 2 + endpoints: + - for external dpi rgb panel or bridge, using gpios. + - for internal dpi input of the MIPI DSI host controller. + Note: These 2 endpoints cannot be activated simultaneously. * STMicroelectronics STM32 DSI controller specific extensions to Synopsys DesignWare MIPI DSI host controller diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 92441086caba..cd626ee1147a 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -40,15 +40,19 @@ CEC. It is one end of the pipeline. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-hdmi * allwinner,sun5i-a10s-hdmi + * allwinner,sun6i-a31-hdmi - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the HDMI encoder * ahb: the HDMI interface clock * mod: the HDMI module clock + * ddc: the HDMI ddc clock (A31 only) * pll-0: the first video PLL * pll-1: the second video PLL - clock-names: the clock names mentioned above + - resets: phandle to the reset control for the HDMI encoder (A31 only) - dmas: phandles to the DMA channels used by the HDMI encoder * ddc-tx: The channel for DDC transmission * ddc-rx: The channel for DDC reception @@ -83,10 +87,13 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - compatible: value must be either: + * allwinner,sun4i-a10-tcon * allwinner,sun5i-a13-tcon * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon + * allwinner,sun7i-a20-tcon * allwinner,sun8i-a33-tcon + * allwinner,sun8i-a83t-tcon-lcd * allwinner,sun8i-v3s-tcon - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP @@ -115,6 +122,14 @@ Required properties: On SoCs other than the A33 and V3s, there is one more clock required: - 'tcon-ch1': The clock driving the TCON channel 1 +On SoCs that support LVDS (all SoCs but the A13, H3, H5 and V3s), you +need one more reset line: + - 'lvds': The reset line driving the LVDS logic + +And on the A23, A31, A31s and A33, you need one more clock line: + - 'lvds-alt': An alternative clock source, separate from the TCON channel 0 + clock, that can be used to drive the LVDS clock + DRC --- @@ -150,8 +165,10 @@ system. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-backend * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend + * allwinner,sun7i-a20-display-backend * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -182,8 +199,10 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-frontend * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend + * allwinner,sun7i-a20-display-frontend * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -206,6 +225,7 @@ supported. Required properties: - compatible: value must be one of: + * allwinner,sun8i-a83t-de2-mixer-0 * allwinner,sun8i-v3s-de2-mixer - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the mixer @@ -228,11 +248,14 @@ extra node. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-engine * allwinner,sun5i-a10s-display-engine * allwinner,sun5i-a13-display-engine * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine + * allwinner,sun7i-a20-display-engine * allwinner,sun8i-a33-display-engine + * allwinner,sun8i-a83t-display-engine * allwinner,sun8i-v3s-display-engine - allwinner,pipelines: list of phandle to the display engine @@ -266,7 +289,7 @@ connector { }; }; -hdmi: hdmi@01c16000 { +hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; interrupts = <58>; @@ -305,7 +328,7 @@ hdmi: hdmi@01c16000 { }; }; -tve0: tv-encoder@01c0a000 { +tve0: tv-encoder@1c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; clocks = <&ahb_gates 34>; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 74e1e8add5a1..593be44a53c9 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -3,6 +3,10 @@ NVIDIA Tegra host1x Required properties: - compatible: "nvidia,tegra<chip>-host1x" - reg: Physical base address and length of the controller's registers. + For pre-Tegra186, one entry describing the whole register area. + For Tegra186, one entry for each entry in reg-names: + "vm" - VM region assigned to Linux + "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) - interrupts: The interrupt outputs from the controller. - #address-cells: The number of cells used to represent physical base addresses in the host1x address space. Should be 1. @@ -202,21 +206,33 @@ of the following host1x client modules: - "nvidia,tegra132-sor": for Tegra132 - "nvidia,tegra210-sor": for Tegra210 - "nvidia,tegra210-sor1": for Tegra210 + - "nvidia,tegra186-sor": for Tegra186 + - "nvidia,tegra186-sor1": for Tegra186 - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. - clocks: Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. - clock-names: Must include the following entries: - sor: clock input for the SOR hardware - - source: source clock for the SOR clock + - out: SOR output clock - parent: input for the pixel clock - dp: reference clock for the SOR clock - safe: safe reference for the SOR clock during power up + + For Tegra186 and later: + - pad: SOR pad output clock (on Tegra186 and later) + + Obsolete: + - source: source clock for the SOR clock (obsolete, use "out" instead) + - resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following entries: - sor + Required properties on Tegra186 and later: + - nvidia,interface: index of the SOR interface + Optional properties: - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection diff --git a/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt index c30f9ec189ed..91279f1060fe 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt +++ b/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt @@ -47,6 +47,11 @@ Required properties: - clocks: handle to fclk - clock-names: "fck" +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + + HDMI ---- diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt index afcd5a86c6a4..ee867c4d1152 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt +++ b/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt @@ -28,6 +28,10 @@ Required properties: - ti,hwmods: "dss_dispc" - interrupts: the DISPC interrupt +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + RFBI ---- diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt index dc66e1447c31..cd02516a40b6 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt +++ b/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt @@ -37,6 +37,10 @@ Required properties: - clocks: handle to fclk - clock-names: "fck" +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + RFBI ---- diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt index bc624db8888d..0f85f6b3a5a8 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt +++ b/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt @@ -36,6 +36,10 @@ Required properties: - clocks: handle to fclk - clock-names: "fck" +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + RFBI ---- diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt index 118a486c47bb..20861218649f 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt +++ b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt @@ -36,6 +36,10 @@ Required properties: - clocks: handle to fclk - clock-names: "fck" +Optional properties: +- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit + in bytes per second + RFBI ---- diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt index 55492c264d17..1ae4748730a8 100644 --- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt +++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt @@ -47,8 +47,8 @@ When the OS is not in control of the management interface (i.e. it's a guest), the channel nodes appear on their own, not under a management node. Required properties: -- compatible: must contain "qcom,hidma-1.0" for initial HW or "qcom,hidma-1.1" -for MSI capable HW. +- compatible: must contain "qcom,hidma-1.0" for initial HW or + "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW. - reg: Addresses for the transfer and event channel - interrupts: Should contain the event interrupt - desc-count: Number of asynchronous requests this channel can handle @@ -73,7 +73,7 @@ Hypervisor OS configuration: max-read-transactions = <31>; channel-reset-timeout-cycles = <0x500>; - hidma_24: dma-controller@0x5c050000 { + hidma_24: dma-controller@5c050000 { compatible = "qcom,hidma-1.0"; reg = <0 0x5c050000 0x0 0x1000>, <0 0x5c0b0000 0x0 0x1000>; @@ -85,7 +85,7 @@ Hypervisor OS configuration: Guest OS configuration: - hidma_24: dma-controller@0x5c050000 { + hidma_24: dma-controller@5c050000 { compatible = "qcom,hidma-1.0"; reg = <0 0x5c050000 0x0 0x1000>, <0 0x5c0b0000 0x0 0x1000>; diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index 1be6941ac1e5..f3d1f151ba80 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -3,6 +3,8 @@ Required Properties: -compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback. Examples with soctypes are: + - "renesas,r8a7743-usb-dmac" (RZ/G1M) + - "renesas,r8a7745-usb-dmac" (RZ/G1E) - "renesas,r8a7790-usb-dmac" (R-Car H2) - "renesas,r8a7791-usb-dmac" (R-Car M2-W) - "renesas,r8a7793-usb-dmac" (R-Car M2-N) diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt index a122723907ac..99acc712f83a 100644 --- a/Documentation/devicetree/bindings/dma/snps-dma.txt +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt @@ -64,6 +64,6 @@ Example: reg = <0xe0000000 0x1000>; interrupts = <0 35 0x4>; dmas = <&dmahost 12 0 1>, - <&dmahost 13 0 1 0>; + <&dmahost 13 1 0>; dma-names = "rx", "rx"; }; diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt new file mode 100644 index 000000000000..7a10fea2e51b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt @@ -0,0 +1,41 @@ +* Spreadtrum DMA controller + +This binding follows the generic DMA bindings defined in dma.txt. + +Required properties: +- compatible: Should be "sprd,sc9860-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain one interrupt shared by all channel. +- #dma-cells: must be <1>. Used to represent the number of integer + cells in the dmas property of client device. +- #dma-channels : Number of DMA channels supported. Should be 32. +- clock-names: Should contain the clock of the DMA controller. +- clocks: Should contain a clock specifier for each entry in clock-names. + +Example: + +Controller: +apdma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0x20100000 0x4000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable"; + clocks = <&clk_ap_ahb_gates 5>; +}; + + +Client: +DMA clients connected to the Spreadtrum DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each channel. +The two cells in order are: +1. A phandle pointing to the DMA controller. +2. The channel id. + +spi0: spi@70a00000{ + ... + dma-names = "rx_chn", "tx_chn"; + dmas = <&apdma 11>, <&apdma 12>; + ... +}; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index aa7dbd565ad0..99ab5c4d331e 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -15,7 +15,7 @@ Optional properties: Example: - dma: dma-controller@801C0000 { + dma: dma-controller@801c0000 { compatible = "stericsson,db8500-dma40", "stericsson,dma40"; reg = <0x801C0000 0x1000 0x40010000 0x800>; reg-names = "base", "lcpa"; diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt index 4408af693d0c..0b55718bf889 100644 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -13,6 +13,7 @@ Required properties: - #dma-cells : Must be <4>. See DMA client paragraph for more details. Optional properties: +- dma-requests : Number of DMA requests supported. - resets: Reference to a reset controller asserting the DMA controller - st,mem2mem: boolean; if defined, it indicates that the controller supports memory-to-memory transfer @@ -34,12 +35,13 @@ Example: #dma-cells = <4>; st,mem2mem; resets = <&rcc 150>; + dma-requests = <8>; }; * DMA client DMA clients connected to the STM32 DMA controller must use the format -described in the dma.txt file, using a five-cell specifier for each +described in the dma.txt file, using a four-cell specifier for each channel: a phandle to the DMA controller plus the following four integer cells: 1. The channel id @@ -71,7 +73,7 @@ channel: a phandle to the DMA controller plus the following four integer cells: Example: usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&clk_pclk2>; diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt new file mode 100644 index 000000000000..1b893b235507 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt @@ -0,0 +1,84 @@ +STM32 DMA MUX (DMA request router) + +Required properties: +- compatible: "st,stm32h7-dmamux" +- reg: Memory map for accessing module +- #dma-cells: Should be set to <3>. + First parameter is request line number. + Second is DMA channel configuration + Third is Fifo threshold + For more details about the three cells, please see + stm32-dma.txt documentation binding file +- dma-masters: Phandle pointing to the DMA controllers. + Several controllers are allowed. Only "st,stm32-dma" DMA + compatible are supported. + +Optional properties: +- dma-channels : Number of DMA requests supported. +- dma-requests : Number of DMAMUX requests supported. +- resets: Reference to a reset controller asserting the DMA controller +- clocks: Input clock of the DMAMUX instance. + +Example: + +/* DMA controller 1 */ +dma1: dma-controller@40020000 { + compatible = "st,stm32-dma"; + reg = <0x40020000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-channels = <8>; + dma-requests = <8>; +}; + +/* DMA controller 1 */ +dma2: dma@40020400 { + compatible = "st,stm32-dma"; + reg = <0x40020400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-channels = <8>; + dma-requests = <8>; +}; + +/* DMA mux */ +dmamux1: dma-router@40020800 { + compatible = "st,stm32h7-dmamux"; + reg = <0x40020800 0x3c>; + #dma-cells = <3>; + dma-requests = <128>; + dma-channels = <16>; + dma-masters = <&dma1 &dma2>; + clocks = <&timer_clk>; +}; + +/* DMA client */ +usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&timer_clk>; + dmas = <&dmamux1 41 0x414 0>, + <&dmamux1 42 0x414 0>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt new file mode 100644 index 000000000000..d18772d6bc65 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt @@ -0,0 +1,94 @@ +* STMicroelectronics STM32 MDMA controller + +The STM32 MDMA is a general-purpose direct memory access controller capable of +supporting 64 independent DMA channels with 256 HW requests. + +Required properties: +- compatible: Should be "st,stm32h7-mdma" +- reg: Should contain MDMA registers location and length. This should include + all of the per-channel registers. +- interrupts: Should contain the MDMA interrupt. +- clocks: Should contain the input clock of the DMA instance. +- resets: Reference to a reset controller asserting the DMA controller. +- #dma-cells : Must be <5>. See DMA client paragraph for more details. + +Optional properties: +- dma-channels: Number of DMA channels supported by the controller. +- dma-requests: Number of DMA request signals supported by the controller. +- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via + AHB bus. + +Example: + + mdma1: dma@52000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x52000000 0x1000>; + interrupts = <122>; + clocks = <&timer_clk>; + resets = <&rcc 992>; + #dma-cells = <5>; + dma-channels = <16>; + dma-requests = <32>; + st,ahb-addr-masks = <0x20000000>, <0x00000000>; + }; + +* DMA client + +DMA clients connected to the STM32 MDMA controller must use the format +described in the dma.txt file, using a five-cell specifier for each channel: +a phandle to the MDMA controller plus the following five integer cells: + +1. The request line number +2. The priority level + 0x00: Low + 0x01: Medium + 0x10: High + 0x11: Very high +3. A 32bit mask specifying the DMA channel configuration + -bit 0-1: Source increment mode + 0x00: Source address pointer is fixed + 0x10: Source address pointer is incremented after each data transfer + 0x11: Source address pointer is decremented after each data transfer + -bit 2-3: Destination increment mode + 0x00: Destination address pointer is fixed + 0x10: Destination address pointer is incremented after each data + transfer + 0x11: Destination address pointer is decremented after each data + transfer + -bit 8-9: Source increment offset size + 0x00: byte (8bit) + 0x01: half-word (16bit) + 0x10: word (32bit) + 0x11: double-word (64bit) + -bit 10-11: Destination increment offset size + 0x00: byte (8bit) + 0x01: half-word (16bit) + 0x10: word (32bit) + 0x11: double-word (64bit) +-bit 25-18: The number of bytes to be transferred in a single transfer + (min = 1 byte, max = 128 bytes) +-bit 29:28: Trigger Mode + 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes) + 0x01: Each MDMA request triggers a block transfer (max 64K bytes) + 0x10: Each MDMA request triggers a repeated block transfer + 0x11: Each MDMA request triggers a linked list transfer +4. A 32bit value specifying the register to be used to acknowledge the request + if no HW ack signal is used by the MDMA client +5. A 32bit mask specifying the value to be written to acknowledge the request + if no HW ack signal is used by the MDMA client + +Example: + + i2c4: i2c@5c002000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c002000 0x400>; + interrupts = <95>, + <96>; + clocks = <&timer_clk>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>, + <&mdma1 37 0x0 0x40002 0x0 0x0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index 3b484380c56a..8ad556aca70b 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -12,7 +12,7 @@ Required properties: second cell holding the request line number. Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; @@ -32,7 +32,7 @@ The three cells in order are: 3. The port ID as specified in the datasheet Example: - spi2: spi@01c17000 { + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <0 12 4>; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 98fbe1a5c6dd..7fccc20d8331 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -18,7 +18,7 @@ Required properties: - #dma-cells : Should be 1, a single cell holding a line request number Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = <0 50 4>; @@ -27,6 +27,32 @@ Example: #dma-cells = <1>; }; +------------------------------------------------------------------------------ +For A64 DMA controller: + +Required properties: +- compatible: "allwinner,sun50i-a64-dma" +- dma-channels: Number of DMA channels supported by the controller. + Refer to Documentation/devicetree/bindings/dma/dma.txt +- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells + +Optional properties: +- dma-requests: Number of DMA request signals supported by the controller. + Refer to Documentation/devicetree/bindings/dma/dma.txt + +Example: + dma: dma-controller@1c02000 { + compatible = "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <8>; + dma-requests = <27>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; +------------------------------------------------------------------------------ + Clients: DMA clients connected to the A31 DMA controller must use the format @@ -38,7 +64,7 @@ The two cells in order are: 2. The port ID as specified in the datasheet Example: -spi2: spi@01c6a000 { +spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = <0 67 4>; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 41f0c1a07c56..66026dcf53e1 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 { }; 2. -edma1: edma@02728000 { +edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; @@ -165,13 +165,13 @@ edma1: edma@02728000 { power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc0: tptc@027b0000 { +edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc1: tptc@027b8000 { +edma1_tptc1: tptc@27b8000 { compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt index 3207ceb04d0b..0ab80f69e566 100644 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ b/Documentation/devicetree/bindings/dma/zxdma.txt @@ -13,7 +13,7 @@ Required properties: Example: Controller: - dma: dma-controller@0x09c00000{ + dma: dma-controller@09c00000{ compatible = "zte,zx296702-dma"; reg = <0x09c00000 0x1000>; clocks = <&topclk ZX296702_DMA_ACLK>; @@ -26,7 +26,7 @@ Controller: Client: Use specific request line passing from dmax For example, spdif0 tx channel request line is 4 - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { #sound-dai-cells = <0>; compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt new file mode 100644 index 000000000000..abfae1beca2b --- /dev/null +++ b/Documentation/devicetree/bindings/eeprom/at24.txt @@ -0,0 +1,78 @@ +EEPROMs (I2C) + +Required properties: + + - compatible: Must be a "<manufacturer>,<model>" pair. The following <model> + values are supported (assuming "atmel" as manufacturer): + + "atmel,24c00", + "atmel,24c01", + "atmel,24cs01", + "atmel,24c02", + "atmel,24cs02", + "atmel,24mac402", + "atmel,24mac602", + "atmel,spd", + "atmel,24c04", + "atmel,24cs04", + "atmel,24c08", + "atmel,24cs08", + "atmel,24c16", + "atmel,24cs16", + "atmel,24c32", + "atmel,24cs32", + "atmel,24c64", + "atmel,24cs64", + "atmel,24c128", + "atmel,24c256", + "atmel,24c512", + "atmel,24c1024", + + If <manufacturer> is not "atmel", then a fallback must be used + with the same <model> and "atmel" as manufacturer. + + Example: + compatible = "microchip,24c128", "atmel,24c128"; + + Supported manufacturers are: + + "catalyst", + "microchip", + "nxp", + "ramtron", + "renesas", + "st", + + Some vendors use different model names for chips which are just + variants of the above. Known such exceptions are listed below: + + "renesas,r1ex24002" - the fallback is "atmel,24c02" + + - reg: The I2C address of the EEPROM. + +Optional properties: + + - pagesize: The length of the pagesize for writing. Please consult the + manual of your device, that value varies a lot. A wrong value + may result in data loss! If not specified, a safety value of + '1' is used which will be very slow. + + - read-only: This parameterless property disables writes to the eeprom. + + - size: Total eeprom size in bytes. + + - no-read-rollover: This parameterless property indicates that the + multi-address eeprom does not automatically roll over + reads to the next slave address. Please consult the + manual of your device. + + - wp-gpios: GPIO to which the write-protect pin of the chip is connected. + +Example: + +eeprom@52 { + compatible = "atmel,24c32"; + reg = <0x52>; + pagesize = <32>; + wp-gpios = <&gpio1 3 0>; +}; diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt index 1d3447165c37..b3bde97dc199 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ b/Documentation/devicetree/bindings/eeprom/at25.txt @@ -1,19 +1,26 @@ EEPROMs (SPI) compatible with Atmel at25. Required properties: -- compatible : "atmel,at25". +- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25". + Example "<vendor>,<type>" values: + "microchip,25lc040" + "st,m95m02" + "st,m95256" + - reg : chip select number - spi-max-frequency : max spi frequency to use - pagesize : size of the eeprom page - size : total eeprom size in bytes -- address-width : number of address bits (one of 8, 16, or 24) +- address-width : number of address bits (one of 8, 9, 16, or 24). + For 9 bits, the MSB of the address is sent as bit 3 of the instruction + byte, before the address byte. Optional properties: - spi-cpha : SPI shifted clock phase, as per spi-bus bindings. - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings. - read-only : this parameter-less property disables writes to the eeprom -Obsolete legacy properties are can be used in place of "size", "pagesize", +Obsolete legacy properties can be used in place of "size", "pagesize", "address-width", and "read-only": - at25,byte-len : total eeprom size in bytes - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h @@ -22,8 +29,8 @@ Obsolete legacy properties are can be used in place of "size", "pagesize", Additional compatible properties are also allowed. Example: - at25@0 { - compatible = "atmel,at25", "st,m95256"; + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; reg = <0> spi-max-frequency = <5000000>; spi-cpha; diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt deleted file mode 100644 index afc04589eadf..000000000000 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ /dev/null @@ -1,45 +0,0 @@ -EEPROMs (I2C) - -Required properties: - - - compatible : should be "<manufacturer>,<type>", like these: - - "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", - "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", - "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" - - "catalyst,24c32" - - "microchip,24c128" - - "ramtron,24c64" - - "renesas,r1ex24002" - - The following manufacturers values have been deprecated: - "at", "at24" - - If there is no specific driver for <manufacturer>, a generic - device with <type> and manufacturer "atmel" should be used. - Possible types are: - "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", - "24c128", "24c256", "24c512", "24c1024", "spd" - - - reg : the I2C address of the EEPROM - -Optional properties: - - - pagesize : the length of the pagesize for writing. Please consult the - manual of your device, that value varies a lot. A wrong value - may result in data loss! If not specified, a safety value of - '1' is used which will be very slow. - - - read-only: this parameterless property disables writes to the eeprom - -Example: - -eeprom@52 { - compatible = "atmel,24c32"; - reg = <0x52>; - pagesize = <32>; -}; diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt index e821e16ad65b..0c10802c8327 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt @@ -66,7 +66,7 @@ See ".../sram/sram.txt" for the bindings. Example: -hsp_top0: hsp@03c00000 { +hsp_top0: hsp@3c00000 { ... #mbox-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 20f26fbce875..7b40054be0d8 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -18,6 +18,8 @@ Required properties: * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. +- qcom,dload-mode: phandle to the TCSR hardware block and offset of the + download mode control register (optional) Example for MSM8916: diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt index 00611aceed3e..a25c87b650e5 100644 --- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt @@ -21,7 +21,7 @@ Documentation/devicetree/bindings/gpio/gpio.txt Example: - gpioa: gpio@FF140000 { + gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; interrupt-controller; #interrupt-cells = <1>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt index 826a7208ca93..146e554b3c67 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt @@ -30,7 +30,7 @@ Optional properties: Example: -gpio_altr: gpio@0xff200000 { +gpio_altr: gpio@ff200000 { compatible = "altr,pio-1.0"; reg = <0xff200000 0x10>; interrupts = <0 45 4>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt index a6611304dd3c..fc42b2caa06d 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt @@ -1,10 +1,17 @@ -AXP209 GPIO controller +AXP209 GPIO & pinctrl controller This driver follows the usual GPIO bindings found in Documentation/devicetree/bindings/gpio/gpio.txt +This driver follows the usual pinctrl bindings found in +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +This driver employs the per-pin muxing pattern. + Required properties: -- compatible: Should be "x-powers,axp209-gpio" +- compatible: Should be one of: + - "x-powers,axp209-gpio" + - "x-powers,axp813-gpio" - #gpio-cells: Should be two. The first cell is the pin number and the second is the GPIO flags. - gpio-controller: Marks the device node as a GPIO controller. @@ -28,3 +35,41 @@ axp209: pmic@34 { #gpio-cells = <2>; }; }; + +The GPIOs can be muxed to other functions and therefore, must be a subnode of +axp_gpio. + +Example: + +&axp_gpio { + gpio0_adc: gpio0-adc { + pins = "GPIO0"; + function = "adc"; + }; +}; + +&example_node { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_adc>; +}; + +GPIOs and their functions +------------------------- + +Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does +not force GPIO1 and GPIO2 to be in gpio_in function as well). + +axp209 +------ +GPIO | Functions +------------------------ +GPIO0 | gpio_in, gpio_out, ldo, adc +GPIO1 | gpio_in, gpio_out, ldo, adc +GPIO2 | gpio_in, gpio_out + +axp813 +------ +GPIO | Functions +------------------------ +GPIO0 | gpio_in, gpio_out, ldo, adc +GPIO1 | gpio_in, gpio_out, ldo diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt index 6c7e6c7302f5..0423699d74c7 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt @@ -25,7 +25,7 @@ Please refer to gpio.txt in this directory for details of the common GPIO bindings used by client devices. Example: - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; ti,syscon-dev = <&devctrl 0x240>; gpio-controller; diff --git a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt new file mode 100644 index 000000000000..b3a6444b8f45 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt @@ -0,0 +1,59 @@ +GPIO driver for Maxim MAX3191x industrial serializer + +Required properties: + - compatible: Must be one of: + "maxim,max31910" + "maxim,max31911" + "maxim,max31912" + "maxim,max31913" + "maxim,max31953" + "maxim,max31963" + - reg: Chip select number. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be two. For consumer use see gpio.txt. + +Optional properties: + - #daisy-chained-devices: + Number of chips in the daisy-chain (default is 1). + - maxim,modesel-gpios: GPIO pins to configure modesel of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + (if each chip is driven by a separate pin) or 1 + (if all chips are wired to the same pin). + - maxim,fault-gpios: GPIO pins to read fault of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + or 1. + - maxim,db0-gpios: GPIO pins to configure debounce of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + or 1. + - maxim,db1-gpios: GPIO pins to configure debounce of each chip. + The number of GPIOs must equal "maxim,db0-gpios". + - maxim,modesel-8bit: Boolean whether the modesel pin of the chips is + pulled high (8-bit mode). Use this if the modesel pin + is hardwired and consequently "maxim,modesel-gpios" + cannot be specified. By default if neither this nor + "maxim,modesel-gpios" is given, the driver assumes + that modesel is pulled low (16-bit mode). + - maxim,ignore-undervoltage: + Boolean whether to ignore undervoltage alarms signaled + by the "maxim,fault-gpios" or by the status byte + (in 16-bit mode). Use this if the chips are powered + through 5VOUT instead of VCC24V, in which case they + will constantly signal undervoltage. + +For other required and optional properties of SPI slave nodes please refer to +../spi/spi-bus.txt. + +Example: + gpio@0 { + compatible = "maxim,max31913"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + + maxim,modesel-gpios = <&gpio2 23>; + maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + maxim,db0-gpios = <&gpio2 25>; + maxim,db1-gpios = <&gpio2 26>; + + spi-max-frequency = <25000000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt index 7f57271df2bc..0d0158728f89 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt @@ -27,7 +27,7 @@ Required properties: ti,tca6424 ti,tca9539 ti,tca9554 - onsemi,pca9654 + onnn,pca9654 exar,xra1202 Optional properties: diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt index 854de130a971..78458adbf4b7 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.txt @@ -27,7 +27,7 @@ Optional properties: Example: -gpio1: stp@E100BB0 { +gpio1: stp@e100bb0 { compatible = "lantiq,gpio-stp-xway"; reg = <0xE100BB0 0x40>; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt index 1fd98ffa8cb7..528f5ef5a893 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt @@ -30,7 +30,7 @@ Optional properties: Example: - pdc_gpios: gpio-controller@02006500 { + pdc_gpios: gpio-controller@2006500 { gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt index 174cdf309170..b05a90e0ab29 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt @@ -59,7 +59,7 @@ Required properties: Example: - gpios: gpio-controller@02005800 { + gpios: gpio-controller@2005800 { #address-cells = <1>; #size-cells = <0>; compatible = "img,tz1090-gpio"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt new file mode 100644 index 000000000000..fed9158dd913 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt @@ -0,0 +1,52 @@ +UniPhier GPIO controller + +Required properties: +- compatible: Should be "socionext,uniphier-gpio". +- reg: Specifies offset and length of the register set for the device. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be 2. The first cell is the pin number and the second + cell is used to specify optional parameters. +- interrupt-parent: Specifies the parent interrupt controller. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be 2. The first cell defines the interrupt number. + The second cell bits[3:0] is used to specify trigger type as follows: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. +- ngpios: Specifies the number of GPIO lines. +- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt) +- socionext,interrupt-ranges: Specifies an interrupt number mapping between + this GPIO controller and its interrupt parent, in the form of arbitrary + number of <child-interrupt-base parent-interrupt-base length> triplets. + +Optional properties: +- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt) + +Example: + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; + }; + +Consumer Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; + }; + +Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document. +Unfortunately, only the one's place is octal in the port numbering. (That is, +PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper +macro to calculate 29 * 8 + 4. diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index 802402f6cc5d..b5de08e3b1a2 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -290,7 +290,7 @@ pins 50..69. Example 2: - gpio_pio_i: gpio-controller@14B0 { + gpio_pio_i: gpio-controller@14b0 { #gpio-cells = <2>; compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank"; reg = <0x1480 0x18>; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 51c86f69995e..9474138d776e 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -5,7 +5,7 @@ Required Properties: - compatible: should contain one or more of the following: - "renesas,gpio-r8a7743": for R8A7743 (RZ/G1M) compatible GPIO controller. - "renesas,gpio-r8a7745": for R8A7745 (RZ/G1E) compatible GPIO controller. - - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. + - "renesas,gpio-r8a7778": for R8A7778 (R-Car M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller. @@ -14,6 +14,8 @@ Required Properties: - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller. - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller. - "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller. + - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller. + - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller. - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller. - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller. - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 GPIO controller. diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index 4d6c8cdc8586..4a75da7051bd 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -29,6 +29,7 @@ controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts. - snps,nr-gpios : The number of pins in the port, a single cell. +- resets : Reset line for the controller. Example: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index b4ebd56d03f3..ad876548ab5d 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,11 @@ Required properties: + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + rockchip,rk3036-mali + + rockchip,rk3066-mali + + rockchip,rk3188-mali + + rockchip,rk3228-mali + + rockchip,rk3328-mali + stericsson,db8500-mali - reg: Physical base address and length of the GPU registers @@ -40,10 +45,18 @@ Optional properties: Memory region to allocate from, as defined in Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + - mali-supply: + Phandle to regulator for the Mali device, as defined in + Documentation/devicetree/bindings/regulator/regulator.txt for details. + - operating-points-v2: Operating Points for the GPU, as defined in Documentation/devicetree/bindings/opp/opp.txt + - power-domains: + A power domain consumer specifier as defined in + Documentation/devicetree/bindings/power/power_domain.txt + Vendor-specific bindings ------------------------ @@ -63,6 +76,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - Rockchip variants: + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index b8eca3c7810d..955e335e7e56 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -1,10 +1,12 @@ OMAP SSI controller bindings -OMAP Synchronous Serial Interface (SSI) controller implements a legacy -variant of MIPI's High Speed Synchronous Serial Interface (HSI). +OMAP3's Synchronous Serial Interface (SSI) controller implements a +legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI), +while the controller found inside OMAP4 is supposed to be fully compliant +with the HSI standard. Required properties: -- compatible: Should include "ti,omap3-ssi". +- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi" - reg-names: Contains the values "sys" and "gdd" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device. Required Port sub-node properties: - compatible: Should be set to the following value ti,omap3-ssi-port (applicable to OMAP34xx devices) + ti,omap4-hsi-port (applicable to OMAP44xx devices) - reg-names: Contains the values "tx" and "rx" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -38,6 +41,10 @@ Required Port sub-node properties: property. If it's missing the port will not be enabled. +Optional properties: +- ti,hwmods: Shall contain TI interconnect module name if needed + by the SoC + Example for Nokia N900: ssi-controller@48058000 { diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt index 367c8203213b..3ac02988a1a5 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -22,8 +22,9 @@ Required properties for pwm-tacho node: - compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and "aspeed,ast2500-pwm-tacho" for AST2500. -- clocks : a fixed clock providing input clock frequency(PWM - and Fan Tach clock) +- clocks : phandle to clock provider with the clock number in the second cell + +- resets : phandle to reset controller with the reset number in the second cell fan subnode format: =================== @@ -48,19 +49,14 @@ Required properties for each child node: Examples: -pwm_tacho_fixed_clk: fixedclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; -}; - pwm_tacho: pwmtachocontroller@1e786000 { #address-cells = <1>; #size-cells = <1>; #cooling-cells = <2>; reg = <0x1E786000 0x1000>; compatible = "aspeed,ast2500-pwm-tacho"; - clocks = <&pwm_tacho_fixed_clk>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_PWM>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt index 439a7430fc68..439a7430fc68 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt index 07a250498fbb..f569db58f64a 100644 --- a/Documentation/devicetree/bindings/hwmon/jc42.txt +++ b/Documentation/devicetree/bindings/hwmon/jc42.txt @@ -34,6 +34,10 @@ Required properties: - reg: I2C address +Optional properties: +- smbus-timeout-disable: When set, the smbus timeout function will be disabled. + This is not supported on all chips. + Example: temp-sensor@1a { diff --git a/Documentation/devicetree/bindings/hwmon/max1619.txt b/Documentation/devicetree/bindings/hwmon/max1619.txt new file mode 100644 index 000000000000..c70dbbe1e56f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max1619.txt @@ -0,0 +1,12 @@ +Bindings for MAX1619 Temperature Sensor + +Required properties: +- compatible : "maxim,max1619" +- reg : I2C address, one of 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, or + 0x4d, 0x4e + +Example: + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt new file mode 100644 index 000000000000..106e08c56aaa --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max31785.txt @@ -0,0 +1,22 @@ +Bindings for the Maxim MAX31785 Intelligent Fan Controller +========================================================== + +Reference: + +https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +Required properties: +- compatible : One of "maxim,max31785" or "maxim,max31785a" +- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. + +Example: + + fans@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt index 248a155414c2..548a73cde796 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt @@ -54,7 +54,7 @@ Optional properties: Example: - i2c@12CA0000 { + i2c@12ca0000 { compatible = "acme,some-i2c-device"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index bd6480b19535..e7106bfc1f13 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -7,7 +7,9 @@ Required Properties: - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" - clocks : root clock of bus, should reference the APB - clock + clock in the second cell +- resets : phandle to reset controller with the reset number in + the second cell - interrupts : interrupt number - interrupt-parent : interrupt controller for bus, should reference a aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic @@ -40,7 +42,8 @@ i2c { #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt index 2296d782b4c2..7d53a2b79553 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt @@ -17,7 +17,7 @@ Optional properties : Example : -i2c@02010084000 { +i2c@2010084000 { compatible = "lsi,api2c"; device_type = "i2c"; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 5b123e0e4cc2..64e6e656c345 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -6,6 +6,18 @@ davinci/keystone i2c interface contains. Required properties: - compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; - reg : Offset and length of the register set for the device +- clocks: I2C functional clock phandle. + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the I2C device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Recommended properties : - interrupts : standard interrupt property. diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt index 4f8ec947c6bd..38a05562d1d2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt @@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver Required properties: - compatible = "i2c-gpio"; - - gpios: sda and scl gpio - + - sda-gpios: gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + - scl-gpios: gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. Optional properties: - - i2c-gpio,sda-open-drain: sda as open drain - - i2c-gpio,scl-open-drain: scl as open drain - i2c-gpio,scl-output-only: scl as output only - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - i2c-gpio,timeout-ms: timeout to get data +Deprecated properties, do not use in new device tree sources: + - gpios: sda and scl gpio, alternative for {sda,scl}-gpios + - i2c-gpio,sda-open-drain: this means that something outside of our + control has put the GPIO line used for SDA into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + - i2c-gpio,scl-open-drain: this means that something outside of our + control has put the GPIO line used for SCL into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + Example nodes: +#include <dt-bindings/gpio/gpio.h> + i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ - >; - i2c-gpio,sda-open-drain; - i2c-gpio,scl-open-drain; + sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt index 70c054a9a997..60fe90d69f4e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.txt @@ -11,7 +11,7 @@ Required properties: Examples: -lpi2c7: lpi2c7@40A50000 { +lpi2c7: lpi2c7@40a50000 { compatible = "fsl,imx8dv-lpi2c"; reg = <0x40A50000 0x10000>; interrupt-parent = <&intc>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt index 231e4cc4008c..d4a082acf92f 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt @@ -18,7 +18,7 @@ Optional properties: Example / { - i2c4: i2c4@0x10054000 { + i2c4: i2c4@10054000 { compatible = "ingenic,jz4780-i2c"; reg = <0x10054000 0x1000>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-meson.txt b/Documentation/devicetree/bindings/i2c/i2c-meson.txt index 611b934c7e10..13d410de077c 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-meson.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-meson.txt @@ -1,7 +1,11 @@ Amlogic Meson I2C controller Required properties: - - compatible: must be "amlogic,meson6-i2c" or "amlogic,meson-gxbb-i2c" + - compatible: must be: + "amlogic,meson6-i2c" for Meson8 and compatible SoCs + "amlogic,meson-gxbb-i2c" for GXBB and compatible SoCs + "amlogic,meson-axg-i2c"for AXG and compatible SoCs + - reg: physical address and length of the device registers - interrupts: a single interrupt specifier - clocks: clock for the device diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt index ff7bf37deb43..e199695b1c96 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt @@ -5,6 +5,7 @@ The MediaTek's I2C controller is used to interface with I2C devices. Required properties: - compatible: value should be either of the following. "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701 + "mediatek,mt2712-i2c": for MediaTek MT2712 "mediatek,mt6577-i2c": for MediaTek MT6577 "mediatek,mt6589-i2c": for MediaTek MT6589 "mediatek,mt7622-i2c": for MediaTek MT7622 diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt index aa097045a10e..34d91501342e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -1,10 +1,19 @@ * NXP PCA954x I2C bus switch +The driver supports NXP PCA954x and PCA984x I2C mux/switch devices. + Required Properties: - compatible: Must contain one of the following. - "nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544", - "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548" + "nxp,pca9540", + "nxp,pca9542", + "nxp,pca9543", + "nxp,pca9544", + "nxp,pca9545", + "nxp,pca9546", "nxp,pca9846", + "nxp,pca9547", "nxp,pca9847", + "nxp,pca9548", "nxp,pca9848", + "nxp,pca9849" - reg: The I2C address of the device. diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt index 212e6779dc5c..b38f58a1c878 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt @@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus. Optional properties: - #address-cells = <1>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - #size-cells = <0>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - i2c-mux For i2c multiplexers/switches that have child nodes that are a mixture diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt index 5c30026921ae..0ffe65a316ae 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt @@ -25,6 +25,15 @@ default frequency is 100kHz whenever you're using the "allwinner,sun6i-a31-i2c" compatible. + - clocks: : pointers to the reference clocks for this device, the + first one is the one used for the clock on the i2c bus, + the second one is the clock used to acces the registers + of the controller + + - clock-names : names of used clocks, mandatory if the second clock is + used, the name must be "core", and "reg" (the latter is + only for Armada 7K/8K). + Examples: i2c@11000 { @@ -42,3 +51,14 @@ For the Armada XP: interrupts = <29>; clock-frequency = <100000>; }; + +For the Armada 7040: + + i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + interrupts = <29>; + clock-frequency = <100000>; + clock-names = "core", "reg"; + clocks = <&core_clock>, <®_clock>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index cad39aee9f73..a777477e4547 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -13,6 +13,7 @@ Required properties: "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC. + "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC. "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt index 6b765485af7d..49df0053347a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt @@ -24,7 +24,7 @@ Slave device properties: Example: - p2wi@01f03400 { + p2wi@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index cee9d5055fa2..11263982470e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below. interrupts used by the device. - interrupt-names - "irq" and "wakeup" names are recognized by I2C core, other names are - left to individual drivers. + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. - host-notify device uses SMBus host notify protocol instead of interrupt line. diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt index f413e82c8b83..1e6ee3deb4fa 100644 --- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt +++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt @@ -15,7 +15,6 @@ Required properties: - "clkin" for the reference clock (typically XTAL) - "core" for the SAR ADC core clock optional clocks: - - "sana" for the analog clock - "adc_clk" for the ADC (sampling) clock - "adc_sel" for the ADC (sampling) clock mux - vref-supply: the regulator supply for the ADC reference voltage diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt index 674e133b7cd7..034fc2ba100e 100644 --- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt @@ -8,6 +8,7 @@ Required properties: - reg: memory window mapping address and length - clocks: Input clock used to derive the sample clock. Expected to be the SoC's APB clock. +- resets: Reset controller phandle - #io-channel-cells: Must be set to <1> to indicate channels are selected by index. @@ -15,6 +16,7 @@ Example: adc@1e6e9000 { compatible = "aspeed,ast2400-adc"; reg = <0x1e6e9000 0xb0>; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_ADC>; #io-channel-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt index 552e7a83951d..6469a4cd2a6d 100644 --- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -17,6 +17,11 @@ Required properties: This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING , IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH +Optional properties: + - dmas: Phandle to dma channel for the ADC. + - dma-names: Must be "rx" when dmas property is being used. + See ../../dma/dma.txt for details. + Example: adc: adc@fc030000 { @@ -31,4 +36,6 @@ adc: adc@fc030000 { vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; + dma-names = "rx"; } diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt index bcd3ac8e6e0c..7d64753df949 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -29,15 +29,29 @@ Required properties: "microchip,mcp3204" "microchip,mcp3208" "microchip,mcp3301" + "microchip,mcp3550-50" + "microchip,mcp3550-60" + "microchip,mcp3551" + "microchip,mcp3553" NOTE: The use of the compatibles with no vendor prefix is deprecated and only listed because old DT use them. + - spi-cpha, spi-cpol (boolean): + Either SPI mode (0,0) or (1,1) must be used, so specify + none or both of spi-cpha, spi-cpol. The MCP3550/1/3 + is more efficient in mode (1,1) as only 3 instead of + 4 bytes need to be read from the ADC, but not all SPI + masters support it. + + - vref-supply: Phandle to the external reference voltage supply. + Examples: spi_controller { mcp3x0x@0 { compatible = "mcp3002"; reg = <0>; spi-max-frequency = <1000000>; + vref-supply = <&vref_reg>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 64dc4843c180..0df9befdaecc 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -12,6 +12,7 @@ for the Thermal Controller which holds a phandle to the AUXADC. Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs + - "mediatek,mt2712-auxadc": For MT2712 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs - reg: Address range of the AUXADC unit. diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt new file mode 100644 index 000000000000..e9ebb8a20e0d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt @@ -0,0 +1,13 @@ +Device-Tree bindings for sigma delta modulator + +Required properties: +- compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use + as a generic SD modulator if modulator not specified in compatible list. +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". + +Example node: + + ads1202: adc@0 { + compatible = "sd-modulator"; + #io-channel-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt index 48bfcaa3ffcd..e8bb8243e92c 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt @@ -62,6 +62,15 @@ Required properties: - st,adc-channels: List of single-ended channels muxed for this ADC. It can have up to 16 channels on stm32f4 or 20 channels on stm32h7, numbered from 0 to 15 or 19 (resp. for in0..in15 or in0..in19). +- st,adc-diff-channels: List of differential channels muxed for this ADC. + Depending on part used, some channels can be configured as differential + instead of single-ended (e.g. stm32h7). List here positive and negative + inputs pairs as <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered + from 0 to 19 on stm32h7) + Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is required. + Both properties can be used together. Some channels can be used as + single-ended and some other ones as differential (mixed). But channels + can't be configured both as single-ended and differential (invalid). - #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in Documentation/devicetree/bindings/iio/iio-bindings.txt @@ -111,3 +120,18 @@ Example: ... other adc child nodes follow... }; + +Example to setup: +- channel 1 as single-ended +- channels 2 & 3 as differential (with resp. 6 & 7 negative inputs) + + adc: adc@40022000 { + compatible = "st,stm32h7-adc-core"; + ... + adc1: adc@0 { + compatible = "st,stm32h7-adc"; + ... + st,adc-channels = <1>; + st,adc-diff-channels = <2 6>, <3 7>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt new file mode 100644 index 000000000000..911492da48f3 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt @@ -0,0 +1,128 @@ +STMicroelectronics STM32 DFSDM ADC device driver + + +STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to +interface external sigma delta modulators to STM32 micro controllers. +It is mainly targeted for: +- Sigma delta modulators (motor control, metering...) +- PDM microphones (audio digital microphone) + +It features up to 8 serial digital interfaces (SPI or Manchester) and +up to 4 filters on stm32h7. + +Each child node match with a filter instance. + +Contents of a STM32 DFSDM root node: +------------------------------------ +Required properties: +- compatible: Should be "st,stm32h7-dfsdm". +- reg: Offset and length of the DFSDM block register set. +- clocks: IP and serial interfaces clocking. Should be set according + to rcc clock ID and "clock-names". +- clock-names: Input clock name "dfsdm" must be defined, + "audio" is optional. If defined CLKOUT is based on the audio + clock, else "dfsdm" is used. +- #interrupt-cells = <1>; +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- spi-max-frequency: Requested only for SPI master mode. + SPI clock OUT frequency (Hz). This clock must be set according + to "clock" property. Frequency must be a multiple of the rcc + clock frequency. If not, SPI CLKOUT frequency will not be + accurate. + +Contents of a STM32 DFSDM child nodes: +-------------------------------------- + +Required properties: +- compatible: Must be: + "st,stm32-dfsdm-adc" for sigma delta ADCs + "st,stm32-dfsdm-dmic" for audio digital microphone. +- reg: Specifies the DFSDM filter instance used. +- interrupts: IRQ lines connected to each DFSDM filter instance. +- st,adc-channels: List of single-ended channels muxed for this ADC. + valid values: + "st,stm32h7-dfsdm" compatibility: 0 to 7. +- st,adc-channel-names: List of single-ended channel names. +- st,filter-order: SinC filter order from 0 to 5. + 0: FastSinC + [1-5]: order 1 to 5. + For audio purpose it is recommended to use order 3 to 5. +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers". + +Required properties for "st,stm32-dfsdm-adc" compatibility: +- io-channels: From common IIO binding. Used to pipe external sigma delta + modulator or internal ADC output to DFSDM channel. + This is not required for "st,stm32-dfsdm-pdm" compatibility as + PDM microphone is binded in Audio DT node. + +Required properties for "st,stm32-dfsdm-pdm" compatibility: +- #sound-dai-cells: Must be set to 0. +- dma: DMA controller phandle and DMA request line associated to the + filter instance (specified by the field "reg") +- dma-names: Must be "rx" + +Optional properties: +- st,adc-channel-types: Single-ended channel input type. + - "SPI_R": SPI with data on rising edge (default) + - "SPI_F": SPI with data on falling edge + - "MANCH_R": manchester codec, rising edge = logic 0 + - "MANCH_F": manchester codec, falling edge = logic 1 +- st,adc-channel-clk-src: Conversion clock source. + - "CLKIN": external SPI clock (CLKIN x) + - "CLKOUT": internal SPI clock (CLKOUT) (default) + - "CLKOUT_F": internal SPI clock divided by 2 (falling edge). + - "CLKOUT_R": internal SPI clock divided by 2 (rising edge). + +- st,adc-alt-channel: Must be defined if two sigma delta modulator are + connected on same SPI input. + If not set, channel n is connected to SPI input n. + If set, channel n is connected to SPI input n + 1. + +- st,filter0-sync: Set to 1 to synchronize with DFSDM filter instance 0. + Used for multi microphones synchronization. + +Example of a sigma delta adc connected on DFSDM SPI port 0 +and a pdm microphone connected on DFSDM SPI port 1: + + ads1202: simple_sd_adc@0 { + compatible = "ads1202"; + #io-channel-cells = <1>; + }; + + dfsdm: dfsdm@40017000 { + compatible = "st,stm32h7-dfsdm"; + reg = <0x40017000 0x400>; + clocks = <&rcc DFSDM1_CK>; + clock-names = "dfsdm"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm_adc0: filter@0 { + compatible = "st,stm32-dfsdm-adc"; + #io-channel-cells = <1>; + reg = <0>; + interrupts = <110>; + st,adc-channels = <0>; + st,adc-channel-names = "sd_adc0"; + st,adc-channel-types = "SPI_F"; + st,adc-channel-clk-src = "CLKOUT"; + io-channels = <&ads1202 0>; + st,filter-order = <3>; + }; + dfsdm_pdm1: filter@1 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <1>; + interrupts = <111>; + dmas = <&dmamux1 102 0x400 0x00>; + dma-names = "rx"; + st,adc-channels = <1>; + st,adc-channel-names = "dmic1"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + }; + } diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt new file mode 100644 index 000000000000..eaebbf8dab40 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt @@ -0,0 +1,20 @@ +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver + +Datasheet publicly available at: +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf + +Required properties: + - compatible: Should be one of + maxim,ds4422 + maxim,ds4424 + - reg: Should contain the DAC I2C address + +Optional properties: + - vcc-supply: Power supply is optional. If not defined, driver will ignore it. + +Example: + ds4224@10 { + compatible = "maxim,ds4424"; + reg = <0x10>; /* When A0, A1 pins are ground */ + vcc-supply = <&vcc_3v3>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt new file mode 100644 index 000000000000..9cb0e10df704 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt @@ -0,0 +1,34 @@ +Texas Instruments 8/10/12-bit 2/4-channel DAC driver + +Required properties: + - compatible: Must be one of: + "ti,dac082s085" + "ti,dac102s085" + "ti,dac122s085" + "ti,dac084s085" + "ti,dac104s085" + "ti,dac124s085" + - reg: Chip select number. + - spi-cpha, spi-cpol: SPI mode (0,1) or (1,0) must be used, so specify + either spi-cpha or spi-cpol (but not both). + - vref-supply: Phandle to the external reference voltage supply. + +For other required and optional properties of SPI slave nodes please refer to +../../spi/spi-bus.txt. + +Example: + vref_2v5_reg: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + dac@0 { + compatible = "ti,dac082s085"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-cpol; + vref-supply = <&vref_2v5_reg>; + }; diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt index 295a9edfa4fd..8d8176459d09 100644 --- a/Documentation/devicetree/bindings/iio/health/max30100.txt +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -20,9 +20,9 @@ Optional properties: Example: -max30100@057 { +max30100@57 { compatible = "maxim,max30100"; - reg = <57>; + reg = <0x57>; maxim,led-current-microamp = <24000 50000>; interrupt-parent = <&gpio1>; interrupts = <16 2>; diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt index c695e7cbeefb..ef2ca0a0306f 100644 --- a/Documentation/devicetree/bindings/iio/health/max30102.txt +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -1,9 +1,11 @@ Maxim MAX30102 heart rate and pulse oximeter sensor +Maxim MAX30105 optical particle-sensing module * https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf +* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf Required properties: - - compatible: must be "maxim,max30102" + - compatible: must be "maxim,max30102" or "maxim,max30105" - reg: the I2C address of the sensor - interrupt-parent: should be the phandle for the interrupt controller - interrupts: the sole interrupt generated by the device @@ -12,15 +14,17 @@ Required properties: interrupt client node bindings. Optional properties: - - maxim,red-led-current-microamp: configuration for RED LED current + - maxim,red-led-current-microamp: configuration for red LED current - maxim,ir-led-current-microamp: configuration for IR LED current + - maxim,green-led-current-microamp: configuration for green LED current + (max30105 only) Note that each step is approximately 200 microamps, ranging from 0 uA to 50800 uA. Example: -max30100@57 { +max30102@57 { compatible = "maxim,max30102"; reg = <0x57>; maxim,red-led-current-microamp = <7000>; diff --git a/Documentation/devicetree/bindings/iio/light/uvis25.txt b/Documentation/devicetree/bindings/iio/light/uvis25.txt new file mode 100644 index 000000000000..3041207e3f3c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/uvis25.txt @@ -0,0 +1,23 @@ +* ST UVIS25 uv sensor + +Required properties: +- compatible: should be "st,uvis25" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +uvis25@47 { + compatible = "st,uvis25"; + reg = <0x47>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt index 77d5aba1bd8c..baecc4a85197 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt @@ -19,7 +19,7 @@ Optional properties: Example: -ak8974@0f { +ak8974@f { compatible = "asahi-kasei,ak8974"; reg = <0x0f>; avdd-supply = <&foo_reg>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index e1e7dd3259f6..aa67ceb0d4e0 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ak8975@0c { +ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt index 54e7e70bcea5..831dbee7a5c3 100644 --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -10,7 +10,7 @@ Required properties: Example: -hp03@0x77 { +hp03@77 { compatible = "hoperf,hp03"; reg = <0x77>; xclr-gpio = <&portc 0 0x0>; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 9ec6f5ce54fc..6f626f73417e 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -46,6 +46,8 @@ Accelerometers: - st,h3lis331dl-accel - st,lng2dm-accel - st,lis3l02dq +- st,lis2dw12 +- st,lis3dhh Gyroscopes: - st,l3g4200d-gyro @@ -71,3 +73,5 @@ Pressure sensors: - st,lps25h-press - st,lps331ap-press - st,lps22hb-press +- st,lps33hw +- st,lps35hw diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt index a94940481e55..996ce84352cb 100644 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -26,6 +26,14 @@ Optional subnode-properties: If not specified defaults to 5. - wakeup-source: Boolean, button can wake-up the system. (Legacy property supported: "gpio-key,wakeup") + - wakeup-event-action: Specifies whether the key should wake the + system when asserted, when deasserted, or both. This property is + only valid for keys that wake up the system (e.g., when the + "wakeup-source" property is also provided). + Supported values are defined in linux-event-codes.h: + EV_ACT_ASSERTED - asserted + EV_ACT_DEASSERTED - deasserted + EV_ACT_ANY - both asserted and deasserted - linux,can-disable: Boolean, indicates that button is connected to dedicated (not shared) interrupt which can be disabled to suppress events from the button. diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt index 28e8bd8b7d64..4d3da9d91de4 100644 --- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt +++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt @@ -31,7 +31,7 @@ device-specific compatible properties, which should be used in addition to the - vdd-supply: phandle of the regulator that provides the supply voltage. - post-power-on-delay-ms: time required by the device after enabling its regulators - before it is ready for communication. Must be used with 'vdd-supply'. + or powering it on, before it is ready for communication. Example: diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt index 5305e74e5742..4c5c0a82586d 100644 --- a/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -45,7 +45,7 @@ Optional Properties specific to linux: Example: - keypad@100A0000 { + keypad@100a0000 { compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <173>; diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index 4357e498ef04..1458c3179a63 100644 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -19,7 +19,7 @@ Example: #include <dt-bindings/input/input.h> - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt index ac5dff412e25..f127a2117072 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt @@ -66,7 +66,7 @@ Example: An example of touchscreen node reg = <0x180a6000 0xc30>; }; - touchscreen: touchscreen@180A6000 { + touchscreen: touchscreen@180a6000 { compatible = "brcm,iproc-touchscreen"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt index ca5a2c86480c..56d835242af2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt @@ -15,7 +15,7 @@ Optional properties: Example: i2c@80110000 { - bu21013_tp@0x5c { + bu21013_tp@5c { compatible = "rohm,bu21013_tp"; reg = <0x5c>; touch-gpio = <&gpio2 20 0x4>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index 49fa14ed155c..298e3442f143 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -10,7 +10,7 @@ Required properties: Example: - egalax_ts@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index e67e58b61706..164915004424 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -21,7 +21,7 @@ Optional properties: each read. Valid values are 1, 4, 8, 16 and 32. Example: - tsc: tsc@02040000 { + tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt new file mode 100644 index 000000000000..43ef770dfeb9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt @@ -0,0 +1,22 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings + +RAVE SP input device is a "MFD cell" device corresponding to power +button functionality of RAVE Supervisory Processor. It is expected +that its Device Tree node is specified as a child of the node +corresponding to the parent RAVE SP device (as documented in +Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) + +Required properties: + +- compatible: Should be "zii,rave-sp-pwrbutton" + +Example: + + rave-sp { + compatible = "zii,rave-sp-rdu1"; + current-speed = <38400>; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + } diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt index 4ae553eb333d..4903fb72d883 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sc-nmi-intc@01c00030 { +sc-nmi-intc@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt new file mode 100644 index 000000000000..a83f9a5734ca --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -0,0 +1,36 @@ +Amlogic meson GPIO interrupt controller + +Meson SoCs contains an interrupt controller which is able to watch the SoC +pads and generate an interrupt on edge or level. The controller is essentially +a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge +or level and polarity. It does not expose all 256 mux inputs because the +documentation shows that the upper part is not mapped to any pad. The actual +number of interrupt exposed depends on the SoC. + +Required properties: + +- compatible : must have "amlogic,meson8-gpio-intc” and either + “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or + “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or + “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or + “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912) +- interrupt-parent : a phandle to the GIC the interrupts are routed to. + Usually this is provided at the root level of the device tree as it is + common to most of the SoC. +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. +- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These + are the hwirqs used on the parent interrupt controller. + +Example: + +gpio_interrupt: interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + meson,channel-interrupts = <64 65 66 67 68 69 70 71>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 5eb108e180fa..0a57f2f4167d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -75,6 +75,10 @@ These nodes must have the following properties: - reg: Specifies the base physical address and size of the ITS registers. +Optional: +- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated + address and size of the pre-ITS window. + The main GIC node must contain the appropriate #address-cells, #size-cells and ranges properties for the reg property of all ITS nodes. diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt index 560d8a727b8f..2f3244648646 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -155,7 +155,7 @@ Example: <0x0 0xe112f000 0 0x02000>, <0x0 0xe1140000 0 0x10000>, <0x0 0xe1160000 0 0x10000>; - v2m0: v2m@0x8000 { + v2m0: v2m@8000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x80000 0 0x1000>; @@ -163,7 +163,7 @@ Example: .... - v2mN: v2m@0x9000 { + v2mN: v2m@9000 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x90000 0 0x1000>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt index f320dcd6e69b..8ced1696c325 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt @@ -12,7 +12,7 @@ Required properties: registers - interrupt-controller: Identifies the node as an interrupt controller - #interrupt-cells: Specifies the number of cells needed to encode an - interrupt source. The value shall be 1 + interrupt source. The value shall be 2 Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. @@ -32,6 +32,6 @@ local_intc: local_intc { compatible = "brcm,bcm2836-l1-intc"; reg = <0x40000000 0x100>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; interrupt-parent = <&local_intc>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt index 448273a30a11..36df06c5c567 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt @@ -2,7 +2,8 @@ Broadcom Generic Level 2 Interrupt Controller Required properties: -- compatible: should be "brcm,l2-intc" +- compatible: should be "brcm,l2-intc" for latched interrupt controllers + should be "brcm,bcm7271-l2-intc" for level interrupt controllers - reg: specifies the base physical address and size of the registers - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt index 49ccabbfa6f3..a4ff93d6b7f3 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -8,6 +8,7 @@ Required properties: "fsl,ls1043a-msi" "fsl,ls1046a-msi" "fsl,ls1043a-v1.1-msi" + "fsl,ls1012a-msi" - msi-controller: indicates that this is a PCIe MSI controller node - reg: physical base address of the controller and length of memory mapped. - interrupts: an interrupt to the parent interrupt controller. diff --git a/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt new file mode 100644 index 000000000000..35f752706e7d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt @@ -0,0 +1,30 @@ +Android Goldfish PIC + +Android Goldfish programmable interrupt device used by Android +emulator. + +Required properties: + +- compatible : should contain "google,goldfish-pic" +- reg : <registers mapping> +- interrupts : <interrupt mapping> + +Example for mips when used in cascade mode: + + cpuintc { + #interrupt-cells = <0x1>; + #address-cells = <0>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + interrupt-controller@1f000000 { + compatible = "google,goldfish-pic"; + reg = <0x1f000000 0x1000>; + + interrupt-controller; + #interrupt-cells = <0x1>; + + interrupt-parent = <&cpuintc>; + interrupts = <0x2>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt index 80994adab392..42431f44697f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt @@ -71,7 +71,7 @@ Example 2: * An interrupt generating device that is wired to a Meta external * trigger block. */ - uart1: uart@0x02004c00 { + uart1: uart@02004c00 { // Interrupt source '5' that is level-sensitive. // Note that there are only two cells as specified in the // interrupt parent's '#interrupt-cells' property. diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt index a69118550344..5dc2a55ad811 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt @@ -51,7 +51,7 @@ Example 1: /* * TZ1090 PDC block */ - pdc: pdc@0x02006000 { + pdc: pdc@02006000 { // This is an interrupt controller node. interrupt-controller; diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt new file mode 100644 index 000000000000..caec07cc7149 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt @@ -0,0 +1,22 @@ +Open Multi-Processor Interrupt Controller + +Required properties: + +- compatible : This should be "openrisc,ompic" +- reg : Specifies base physical address and size of the register space. The + size is based on the number of cores the controller has been configured + to handle, this should be set to 8 bytes per cpu core. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : This should be set to 0 as this will not be an irq + parent. +- interrupts : Specifies the interrupt line to which the ompic is wired. + +Example: + +ompic: interrupt-controller@98000000 { + compatible = "openrisc,ompic"; + reg = <0x98000000 16>; + interrupt-controller; + #interrupt-cells = <0>; + interrupts = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index e3f052d8c11a..20f121daa910 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -13,6 +13,10 @@ Required properties: - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a7795" (R-Car H3) + - "renesas,intc-ex-r8a7796" (R-Car M3-W) + - "renesas,intc-ex-r8a77965" (R-Car M3-N) + - "renesas,intc-ex-r8a77970" (R-Car V3M) + - "renesas,intc-ex-r8a77995" (R-Car D3) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory - clocks: Must contain a reference to the functional clock. diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt new file mode 100644 index 000000000000..8b2faefe29ca --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt @@ -0,0 +1,32 @@ +Socionext SynQuacer External Interrupt Unit (EXIU) + +The Socionext Synquacer SoC has an external interrupt unit (EXIU) +that forwards a block of 32 configurable input lines to 32 adjacent +level-high type GICv3 SPIs. + +Required properties: + +- compatible : Should be "socionext,synquacer-exiu". +- reg : Specifies base physical address and size of the + control registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- interrupt-parent : phandle of the GIC these interrupts are routed to. +- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent + ones the EXIU forwards its interrups to. + +Notes: + +- Only SPIs can use the EXIU as an interrupt parent. + +Example: + + exiu: interrupt-controller@510c0000 { + compatible = "socionext,synquacer-exiu"; + reg = <0x0 0x510c0000 0x0 0x20>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + socionext,spi-base = <112>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt index 715a013ed4bd..2ab0ea39867b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt @@ -39,7 +39,7 @@ Example: The following is an example from the SPEAr320 SoC dtsi file. -shirq: interrupt-controller@0xb3000000 { +shirq: interrupt-controller@b3000000 { compatible = "st,spear320-shirq"; reg = <0xb3000000 0x1000>; interrupts = <28 29 30 1>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 6e7703d4ff5b..edf03f09244b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -2,7 +2,9 @@ STM32 External Interrupt Controller Required properties: -- compatible: Should be "st,stm32-exti" +- compatible: Should be: + "st,stm32-exti" + "st,stm32h7-exti" - reg: Specifies base physical address and size of the registers - interrupt-controller: Indentifies the node as an interrupt controller - #interrupt-cells: Specifies the number of cells to encode an interrupt diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt index d9bb106bdd16..5f94d7739d8d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt @@ -20,7 +20,7 @@ Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. Example: - kirq0: keystone_irq0@026202a0 { + kirq0: keystone_irq0@26202a0 { compatible = "ti,keystone-irq"; ti,syscon-dev = <&devctrl 0x2a0>; interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt index b2641ceb2b40..059139abce35 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -115,7 +115,7 @@ to non-secure vs secure interrupt line. iommus = <&apps_iommu 4>; }; - gpu@01c00000 { + gpu@1c00000 { ... iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt index 3ed027cfca95..1fd5d69647ca 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt @@ -16,6 +16,9 @@ Required Properties: - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU. - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU. - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU. + - "renesas,ipmmu-r8a7796" for the R8A7796 (R-Car M3-W) IPMMU. + - "renesas,ipmmu-r8a77970" for the R8A77970 (R-Car V3M) IPMMU. + - "renesas,ipmmu-r8a77995" for the R8A77995 (R-Car D3) IPMMU. - "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU. - reg: Base address and size of the IPMMU registers. @@ -53,7 +56,7 @@ Example: R8A7791 IPMMU-MX and VSP1-D0 bus master #iommu-cells = <1>; }; - vsp1@fe928000 { + vsp@fe928000 { ... iommus = <&ipmmu_mx 13>; ... diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt index 85f068805dd8..b1682c80b490 100644 --- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt +++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt @@ -56,7 +56,7 @@ Examples: iommus = <&sysmmu_gsc0>; }; - sysmmu_gsc0: sysmmu@13E80000 { + sysmmu_gsc0: sysmmu@13e80000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13E80000 0x1000>; interrupt-parent = <&combiner>; diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt new file mode 100644 index 000000000000..6c9074f84a51 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -0,0 +1,49 @@ +* Texas Instruments - LM3692x Highly Efficient White LED Driver + +The LM3692x is an ultra-compact, highly efficient, +white-LED driver designed for LCD display backlighting. + +The main difference between the LM36922 and LM36923 is the number of +LED strings it supports. The LM36922 supports two strings while the LM36923 +supports three strings. + +Required properties: + - compatible: + "ti,lm36922" + "ti,lm36923" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable/disable the device. + - vled-supply : LED supply + +Required child properties: + - reg : 0 + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +led-controller@36 { + compatible = "ti,lm3692x"; + reg = <0x36>; + #address-cells = <1>; + #size-cells = <0>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt index aad38dd94d4b..5f0e892ad759 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -6,23 +6,39 @@ current sinks that can be controlled by a PWM input signal, a SPI/I2C master, or both. Required properties: - - compatible: + - compatible : "ti,lp8860" - - reg - I2C slave address - - label - Used for naming LEDs + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 Optional properties: - - enable-gpio - gpio pin to enable/disable the device. - - supply - "vled" - LED supply + - enable-gpios : gpio pin to enable (active high)/disable the device. + - vled-supply : LED supply + +Required child properties: + - reg : 0 + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt Example: -leds: leds@6 { +led-controller@2d { compatible = "ti,lp8860"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x2d>; - label = "display_cluster"; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + label = "white:backlight"; + linux,default-trigger = "backlight"; + }; } For more product information please see the link below: diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt index 59b56365f648..cf1ea403ba7a 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.txt +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -32,7 +32,7 @@ syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon"; reg = <0x10000000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; @@ -40,7 +40,7 @@ syscon: syscon@10000000 { linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8.1 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x02>; @@ -48,7 +48,7 @@ syscon: syscon@10000000 { linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8.2 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x04>; @@ -56,35 +56,35 @@ syscon: syscon@10000000 { linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8.3 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8.4 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8.5 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8.6 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8.7 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x80>; diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt index c2619797ce0c..49cfc8c337c4 100644 --- a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt @@ -14,7 +14,7 @@ Optional properties: depends on the interrupt controller parent. Example: - mbox_tx: mailbox@0x100 { + mbox_tx: mailbox@100 { compatible = "altr,mailbox-1.0"; reg = <0x100 0x8>; interrupt-parent = < &gic_0 >; @@ -22,7 +22,7 @@ Example: #mbox-cells = <1>; }; - mbox_rx: mailbox@0x200 { + mbox_rx: mailbox@200 { compatible = "altr,mailbox-1.0"; reg = <0x200 0x8>; interrupt-parent = < &gic_0 >; @@ -40,7 +40,7 @@ support only one channel).The equivalent "mbox-names" property value can be used to give a name to the communication channel to be used by the client user. Example: - mclient0: mclient0@0x400 { + mclient0: mclient0@400 { compatible = "client-1.0"; reg = <0x400 0x10>; mbox-names = "mbox-tx", "mbox-rx"; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt index 0f3ee81d92c2..9bcdf2087625 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt @@ -15,7 +15,7 @@ Optional properties: - brcm,use-bcm-hdr: present if a BCM header precedes each frame. Example: - pdc0: iproc-pdc0@0x612c0000 { + pdc0: iproc-pdc0@612c0000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt index 9b40c4925aa9..0ef372656a3e 100644 --- a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt +++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt @@ -124,7 +124,7 @@ dsp { }; /* AM33xx */ -mailbox: mailbox@480C8000 { +mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; interrupts = <77>; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt index fb961c310f44..16964f0c1773 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.txt @@ -15,12 +15,21 @@ platforms. Usage: required Value type: <prop-encoded-array> Definition: must specify the base address and size of the global block +- clocks: + Usage: required if #clocks-cells property is present + Value type: <phandle> + Definition: phandle to the input PLL, which feeds the APCS mux/divider - #mbox-cells: Usage: required Value type: <u32> Definition: as described in mailbox.txt, must be 1 +- #clock-cells: + Usage: optional + Value type: <u32> + Definition: as described in clock.txt, must be 0 + = EXAMPLE The following example describes the APCS HMSS found in MSM8996 and part of the @@ -44,3 +53,12 @@ GLINK RPM referencing the "rpm_hlos" doorbell therein. mbox-names = "rpm_hlos"; }; +Below is another example of the APCS binding on MSM8916 platforms: + + apcs: mailbox@b011000 { + compatible = "qcom,msm8916-apcs-kpss-global"; + reg = <0xb011000 0x1000>; + #mbox-cells = <1>; + clocks = <&a53pll>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt index b449d025049f..ebf0e3710cee 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -20,16 +20,16 @@ Required properties: order referring to the transfer path. - interrupt-names: Contains interrupt names matching the rx transfer path for a given SoC. Receive interrupts shall be of the - format: "rx_<QID>_<PID>". + format: "rx_<QID>". For ti,k2g-message-manager, this shall contain: - "rx_005_002", "rx_057_002" + "rx_005", "rx_057" - interrupts: Contains the interrupt information corresponding to interrupt-names property. Example(K2G): ------------ - msgmgr: msgmgr@02a00000 { + msgmgr: msgmgr@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", "queue_state_debug_region"; diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt index ea2b16ced49b..7f722316458a 100644 --- a/Documentation/devicetree/bindings/marvell.txt +++ b/Documentation/devicetree/bindings/marvell.txt @@ -446,7 +446,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery CPU Error node: - cpu-error@0070 { + cpu-error@70 { compatible = "marvell,mv64360-cpu-error"; reg = <0x70 0x10 0x128 0x28>; interrupts = <3>; @@ -466,7 +466,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery SRAM Controller node: - sram-ctrl@0380 { + sram-ctrl@380 { compatible = "marvell,mv64360-sram-ctrl"; reg = <0x380 0x80>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt new file mode 100644 index 000000000000..12fcd55ed153 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec-gpio.txt @@ -0,0 +1,36 @@ +* HDMI CEC GPIO driver + +The HDMI CEC GPIO module supports CEC implementations where the CEC line +is hooked up to a pull-up GPIO line and - optionally - the HPD line is +hooked up to another GPIO line. + +Please note: the maximum voltage for the CEC line is 3.63V, for the HPD +line it is 5.3V. So you may need some sort of level conversion circuitry +when connecting them to a GPIO line. + +Required properties: + - compatible: value must be "cec-gpio". + - cec-gpios: gpio that the CEC line is connected to. The line should be + tagged as open drain. + +If the CEC line is associated with an HDMI receiver/transmitter, then the +following property is also required: + + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. + +If the CEC line is not associated with an HDMI receiver/transmitter, then +the following property is optional: + + - hpd-gpios: gpio that the HPD line is connected to. + +Example for the Raspberry Pi 3 where the CEC line is connected to +pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is +connected to pin 11 aka BCM17 (some level shifter is needed for this!): + +#include <dt-bindings/gpio/gpio.h> + +cec-gpio { + compatible = "cec-gpio"; + cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index 26ca25b6d264..bc963a6d305a 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -3,8 +3,11 @@ G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. Required properties: -- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and - 5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433) +- compatible: should be one of + "samsung,exynos5250-gsc" + "samsung,exynos5420-gsc" + "samsung,exynos5433-gsc" + "samsung,exynos5-gsc" (deprecated) - reg: should contain G-Scaler physical address location and length. - interrupts: should contain G-Scaler interrupt number @@ -14,8 +17,8 @@ Optional properties: Example: -gsc_0: gsc@0x13e00000 { - compatible = "samsung,exynos5-gsc"; +gsc_0: gsc@13e00000 { + compatible = "samsung,exynos5250-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt new file mode 100644 index 000000000000..80f2e89568e1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -0,0 +1,33 @@ +* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor + +The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 3864H x 2202V. It is programmable through I2C +interface. The I2C address is fixed to 0x1a as per sensor data sheet. +Image data is sent through MIPI CSI-2, which is configured as 4 lanes +at 1440 Mbps. + + +Required Properties: +- compatible: value should be "sony,imx274" for imx274 sensor +- reg: I2C bus address of the device + +Optional Properties: +- reset-gpios: Sensor reset GPIO + +The imx274 device node should contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio_sensor 0 0>; + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt index ed5a334b1e57..6b910036b57e 100644 --- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt +++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt @@ -6,6 +6,8 @@ interface. Required Properties: - compatible: value should be "micron,mt9m111" +- clocks: reference to the master clock. +- clock-names: shall be "mclk". For further reading on port node refer to Documentation/devicetree/bindings/media/video-interfaces.txt. @@ -16,6 +18,8 @@ Example: mt9m111@5d { compatible = "micron,mt9m111"; reg = <0x5d>; + clocks = <&mclk>; + clock-names = "mclk"; remote = <&pxa_camera>; port { diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt index 855e1faf73e2..33f10a94c381 100644 --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt +++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt @@ -27,6 +27,8 @@ Optional properties - nokia,nvm-size: The size of the NVM, in bytes. If the size is not given, the NVM contents will not be read. - reset-gpios: XSHUTDOWN GPIO +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt Endpoint node mandatory properties diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt index 540b36c4b1f2..8e36da0d8406 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt @@ -1,4 +1,4 @@ -* Omnivision OV5640 MIPI CSI-2 sensor +* Omnivision OV5640 MIPI CSI-2 / parallel sensor Required Properties: - compatible: should be "ovti,ov5640" @@ -18,7 +18,25 @@ The device node must contain one 'port' child node for its digital output video port, in accordance with the video interface bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt. -Example: +OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint. + +Endpoint node required properties for CSI-2 connection are: +- remote-endpoint: a phandle to the bus receiver's endpoint node. +- clock-lanes: should be set to <0> (clock lane on hardware lane 0) +- data-lanes: should be set to <1> or <1 2> (one or two CSI-2 lanes supported) + +Endpoint node required properties for parallel connection are: +- remote-endpoint: a phandle to the bus receiver's endpoint node. +- bus-width: shall be set to <8> for 8 bits parallel bus + or <10> for 10 bits parallel bus +- data-shift: shall be set to <2> for 8 bits parallel bus + (lines 9:2 are used) or <0> for 10 bits parallel bus +- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. +- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. +- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock + signal. + +Examples: &i2c1 { ov5640: camera@3c { @@ -35,6 +53,7 @@ Example: reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; port { + /* MIPI CSI-2 bus endpoint */ ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_from_ov5640>; clock-lanes = <0>; @@ -43,3 +62,26 @@ Example: }; }; }; + +&i2c1 { + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + + port { + /* Parallel bus endpoint */ + ov5640_to_parallel: endpoint { + remote-endpoint = <¶llel_from_ov5640>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ov7740.txt new file mode 100644 index 000000000000..af781c3a5f0e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov7740.txt @@ -0,0 +1,47 @@ +* Omnivision OV7740 CMOS image sensor + +The Omnivision OV7740 image sensor supports multiple output image +size, such as VGA, and QVGA, CIF and any size smaller. It also +supports the RAW RGB and YUV output formats. + +The common video interfaces bindings (see video-interfaces.txt) should +be used to specify link to the image data receiver. The OV7740 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Required Properties: +- compatible: "ovti,ov7740". +- reg: I2C slave address of the sensor. +- clocks: Reference to the xvclk input clock. +- clock-names: "xvclk". + +Optional Properties: +- reset-gpios: Rreference to the GPIO connected to the reset_b pin, + if any. Active low with pull-ip resistor. +- powerdown-gpios: Reference to the GPIO connected to the pwdn pin, + if any. Active high with pull-down resistor. + +Endpoint node mandatory properties: +- remote-endpoint: A phandle to the bus receiver's endpoint node. + +Example: + + i2c1: i2c@fc028000 { + ov7740: camera@21 { + compatible = "ovti,ov7740"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor_power &pinctrl_sensor_reset>; + clocks = <&isc>; + clock-names = "xvclk"; + assigned-clocks = <&isc>; + assigned-clock-rates = <24000000>; + reset-gpios = <&pioA 43 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&pioA 44 GPIO_ACTIVE_HIGH>; + + port { + ov7740_0: endpoint { + remote-endpoint = <&isc_0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt index 5218921629ed..49f8bcc2ea4d 100644 --- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt +++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt @@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt. Example: - tc358743@0f { + tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; clocks = <&hdmi_osc>; diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt index 0b7b6a4d84ff..e80d5891b7ed 100644 --- a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt @@ -20,6 +20,13 @@ Mandatory properties is in hardware standby mode when the signal is in the low state. +Optional properties +------------------- + +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt + + Endpoint node mandatory properties ---------------------------------- diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt b/Documentation/devicetree/bindings/media/img-ir-rev1.txt index 5434ce61b925..ed9ec52b77e0 100644 --- a/Documentation/devicetree/bindings/media/img-ir-rev1.txt +++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt @@ -25,7 +25,7 @@ Optional properties: Example: - ir@02006200 { + ir@2006200 { compatible = "img,ir-rev1"; reg = <0x02006200 0x100>; interrupts = <29 4>; diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 46c15c54175d..2a615d84a682 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -68,7 +68,7 @@ vcodec_dec: vcodec@16000000 { "vdec_bus_clk_src"; }; - vcodec_enc: vcodec@0x18002000 { + vcodec_enc: vcodec@18002000 { compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt new file mode 100644 index 000000000000..470237ed6fe5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt @@ -0,0 +1,55 @@ +NVIDIA Tegra Video Decoder Engine + +Required properties: +- compatible : Must contain one of the following values: + - "nvidia,tegra20-vde" + - "nvidia,tegra30-vde" + - "nvidia,tegra114-vde" + - "nvidia,tegra124-vde" + - "nvidia,tegra132-vde" +- reg : Must contain an entry for each entry in reg-names. +- reg-names : Must include the following entries: + - sxe + - bsev + - mbe + - ppe + - mce + - tfe + - ppb + - vdma + - frameid +- iram : Must contain phandle to the mmio-sram device node that represents + IRAM region used by VDE. +- interrupts : Must contain an entry for each entry in interrupt-names. +- interrupt-names : Must include the following entries: + - sync-token + - bsev + - sxe +- clocks : Must include the following entries: + - vde +- resets : Must include the following entries: + - vde + +Example: + +video-codec@6001a000 { + compatible = "nvidia,tegra20-vde"; + reg = <0x6001a000 0x1000 /* Syntax Engine */ + 0x6001b000 0x1000 /* Video Bitstream Engine */ + 0x6001c000 0x100 /* Macroblock Engine */ + 0x6001c200 0x100 /* Post-processing Engine */ + 0x6001c400 0x100 /* Motion Compensation Engine */ + 0x6001c600 0x100 /* Transform Engine */ + 0x6001c800 0x100 /* Pixel prediction block */ + 0x6001ca00 0x100 /* Video DMA */ + 0x6001d800 0x300 /* Video frame controls */>; + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&vde_pool>; /* IRAM region */ + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&tegra_car TEGRA20_CLK_VDE>; + resets = <&tegra_car 61>; +}; diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt index 6e4ef8caf759..19357d0bbe65 100644 --- a/Documentation/devicetree/bindings/media/rcar_vin.txt +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -44,7 +44,7 @@ Device node example vin0 = &vin0; }; - vin0: vin@0xe6ef0000 { + vin0: vin@e6ef0000 { compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; clocks = <&mstp8_clks R8A7790_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt index 9b695bcbf219..16427017cb45 100644 --- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt @@ -22,7 +22,7 @@ Optional properties: Example: R8A7790 (R-Car H2) VSP1-S node - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt new file mode 100644 index 000000000000..fd5276abfad6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -0,0 +1,33 @@ +device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) + +RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D +graphics operations, such as point/line drawing, image scaling, rotation, +BitBLT, alpha blending and image blur/sharpness. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-rga"; + "rockchip,rk3399-rga"; + +- interrupts: RGA interrupt specifier. + +- clocks: phandle to RGA sclk/hclk/aclk clocks + +- clock-names: should be "aclk", "hclk" and "sclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: should be "core", "axi" and "ahb" + +Example: +SoC-specific DT entry: + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core, "axi", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt index 6f3756da900f..e847291d4aff 100644 --- a/Documentation/devicetree/bindings/media/s5p-cec.txt +++ b/Documentation/devicetree/bindings/media/s5p-cec.txt @@ -23,7 +23,7 @@ Optional: Example: -hdmicec: cec@100B0000 { +hdmicec: cec@100b0000 { compatible = "samsung,s5p-cec"; reg = <0x100B0000 0x200>; interrupts = <0 114 0>; diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index e4e15d8d7521..48c599dacbdf 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -138,7 +138,7 @@ Example: }; /* MIPI CSI-2 bus IF sensor */ - s5c73m3: sensor@0x1a { + s5c73m3: sensor@1a { compatible = "samsung,s5c73m3"; reg = <0x1a>; vddio-supply = <...>; diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt index 2c85c4538a6d..21f31fdf5543 100644 --- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt +++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt @@ -62,7 +62,7 @@ For more details see description of the SPI busses bindings Example: -i2c@138A000000 { +i2c@138a000000 { ... s5c73m3@3c { compatible = "samsung,s5c73m3"; diff --git a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt index 1ce4e46bcbb7..17a8e81ca0cc 100644 --- a/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt +++ b/Documentation/devicetree/bindings/media/sh_mobile_ceu.txt @@ -8,7 +8,7 @@ Bindings, specific for the sh_mobile_ceu_camera.c driver: Example: -ceu0: ceu@0xfe910000 { +ceu0: ceu@fe910000 { compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; interrupt-parent = <&intcs>; diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 8be2a040c6c6..ece0832fdeaf 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -13,7 +13,7 @@ Required properties: Example for STIH407: -sti-cec@094a087c { +sti-cec@94a087c { compatible = "st,stih-cec"; reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index 6af3fc210ecc..c7888d6f6408 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -50,7 +50,7 @@ Example: /* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ - c8sectpfe@08a20000 { + c8sectpfe@8a20000 { compatible = "st,stih407-c8sectpfe"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt index 302a0b183cb8..91648c569b1e 100644 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -14,7 +14,7 @@ Optional properties: Example: -ir0: ir@01c21800 { +ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; clock-names = "apb", "ir"; diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt new file mode 100644 index 000000000000..a9f00c2bf897 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tango-ir.txt @@ -0,0 +1,21 @@ +Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) + +Required properties: + +- compatible: "sigma,smp8642-ir" +- reg: address/size of NEC+RC5 area, address/size of RC6 area +- interrupts: spec for IR IRQ +- clocks: spec for IR clock (typically the crystal oscillator) + +Optional properties: + +- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt + +Example: + + ir@10518 { + compatible = "sigma,smp8642-ir"; + reg = <0x10518 0x18>, <0x105e0 0x1c>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + }; diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt new file mode 100644 index 000000000000..c503f06f3b84 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt @@ -0,0 +1,27 @@ +* Tegra HDMI CEC hardware + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to the entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; +}; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 852041a7480c..258b8dfddf48 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -55,6 +55,15 @@ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width and data-shift properties can be used to assign physical data lines to each endpoint node (logical bus). +Documenting bindings for devices +-------------------------------- + +All required and optional bindings the device supports shall be explicitly +documented in device DT binding documentation. This also includes port and +endpoint nodes for the device, including unit-addresses and reg properties where +relevant. + +Please also see Documentation/devicetree/bindings/graph.txt . Required properties ------------------- @@ -67,6 +76,16 @@ are required in a relevant parent node: identifier, should be 1. - #size-cells : should be zero. + +Optional properties +------------------- + +- flash-leds: An array of phandles, each referring to a flash LED, a sub-node + of the LED driver device node. + +- lens-focus: A phandle to the node of the focus lens controller. + + Optional endpoint properties ---------------------------- @@ -99,7 +118,10 @@ Optional endpoint properties determines the logical lane number, while the value of an entry indicates physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - This property is valid for serial busses only (e.g. MIPI CSI-2). + If the hardware does not support lane reordering, monotonically + incremented values shall be used from 0 or 1 onwards, depending on + whether or not there is also a clock lane. This property is valid for + serial busses only (e.g. MIPI CSI-2). - clock-lanes: an array of physical clock lane indexes. Position of an entry determines the logical lane number, while the value of an entry indicates physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", @@ -132,7 +154,7 @@ imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a 'port' node which may indicate that at any time only one of the following data pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - ceu0: ceu@0xfe910000 { + ceu0: ceu@fe910000 { compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; interrupts = <0x880>; @@ -171,9 +193,9 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - i2c0: i2c@0xfff20000 { + i2c0: i2c@fff20000 { ... - ov772x_1: camera@0x21 { + ov772x_1: camera@21 { compatible = "ovti,ov772x"; reg = <0x21>; vddio-supply = <®ulator1>; @@ -197,7 +219,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - imx074: camera@0x1a { + imx074: camera@1a { compatible = "sony,imx074"; reg = <0x1a>; vddio-supply = <®ulator1>; @@ -217,7 +239,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0. }; }; - csi2: csi2@0xffc90000 { + csi2: csi2@ffc90000 { compatible = "renesas,sh-mobile-csi2"; reg = <0xffc90000 0x1000>; interrupts = <0x17a0>; diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt index 9dd86b3db937..439351ab2a79 100644 --- a/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,v-tpg.txt @@ -66,6 +66,6 @@ Example: tpg1_out: endpoint { remote-endpoint = <&switch_in0>; }; - }: + }; }; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt new file mode 100644 index 000000000000..82d923ef413f --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt @@ -0,0 +1,27 @@ +DDR PHY Front End (DPFE) for Broadcom STB +========================================= + +DPFE and the DPFE firmware provide an interface for the host CPU to +communicate with the DCPU, which resides inside the DDR PHY. + +There are three memory regions for interacting with the DCPU. These are +specified in a single reg property. + +Required properties: + - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu" + or "brcm,dpfe-cpu" + - reg: must reference three register ranges + - start address and length of the DCPU register space + - start address and length of the DCPU data memory space + - start address and length of the DCPU instruction memory space + - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem"; + they must be in the same order as the register declarations + +Example: + dpfe_cpu0: dpfe-cpu@f1132000 { + compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; + reg = <0xf1132000 0x180 + 0xf1134000 0x1000 + 0xf1138000 0x4000>; + reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt index 8dbe47013c2b..14968b048cd3 100644 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt @@ -12,6 +12,8 @@ Required properties: - clock-names: Must include the following entries: - mc: the module's clock input - interrupts: The interrupt outputs from the controller. + +Required properties for Tegra30, Tegra114, Tegra124, Tegra132 and Tegra210: - #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines the SWGROUP of the master. diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt index 9592717f483f..190437a0c146 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti-aemif.txt @@ -138,7 +138,7 @@ from the corresponding HW reg. Example for aemif, davinci nand and nor flash chip select shown below. -memory-controller@21000A00 { +memory-controller@21000a00 { compatible = "ti,davinci-aemif"; #address-cells = <2>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 0db60470ebb6..621b41c79faa 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> - is the IP revision of the specific EMIF instance. - For am437x should be ti,emif-am4372. + is the IP revision of the specific EMIF instance. For newer controllers, + compatible should be one of the following: + "ti,emif-am3352" + "ti,emif-am4372" - phy-type : <u32> indicating the DDR phy type. Following are the allowed values @@ -21,6 +23,13 @@ Required properties: the value shall be "emif<n>" where <n> is the number of the EMIF instance with base 1. +Required only for "ti,emif-am3352" and "ti,emif-am4372": +- sram : Phandles for generic sram driver nodes, + first should be type 'protect-exec' for the driver to use to copy + and run PM functions, second should be regular pool to be used for + data region for code. See Documentation/devicetree/bindings/sram/sram.txt + for more details. + Optional properties: - cs1-used : Have this property if CS1 of this EMIF instance has a memory part attached to it. If there is a memory @@ -42,9 +51,9 @@ Optional properties: - hw-caps-temp-alert : Have this property if the controller has capability for generating SDRAM temperature alerts -Example: +-Examples: -emif1: emif@0x4c000000 { +emif1: emif@4c000000 { compatible = "ti,emif-4d"; ti,hwmods = "emif2"; phy-type = <1>; @@ -54,3 +63,11 @@ emif1: emif@0x4c000000 { hw-caps-ll-interface; hw-caps-temp-alert; }; + +/* From am33xx.dtsi */ +emif: emif@4c000000 { + compatible = "ti,emif-am3352"; + reg = <0x4C000000 0x1000>; + sram = <&pm_sram_code + &pm_sram_data>; +}; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index b37bdde5cfda..bdd017686ea5 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,45 +65,6 @@ Optional properties: a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) - <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -112,6 +73,7 @@ Optional properties: Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt Extcon - ../extcon/extcon-arizona.txt + Sound - ../sound/arizona.txt Example: diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt index 4fc5b83726d6..ce8cf0ec6279 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt @@ -9,10 +9,16 @@ Required properties: "aspeed,g5-scu", "syscon", "simple-mfd" - reg: contains the offset and length of the SCU memory region +- #clock-cells: should be set to <1> - the system controller is also a + clock provider +- #reset-cells: should be set to <1> - the system controller is also a + reset line provider Example: syscon: syscon@1e6e2000 { compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt new file mode 100644 index 000000000000..c4a83e364cb6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt @@ -0,0 +1,56 @@ +* Device tree bindings for Atmel Timer Counter Blocks +- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". + <chip> can be "at91rm9200" or "at91sam9x5" +- reg: Should contain registers location and length +- #address-cells: has to be 1 +- #size-cells: has to be 0 +- interrupts: Should contain all interrupts for the TC block + Note that you can specify several interrupt cells if the TC + block has one interrupt per channel. +- clock-names: tuple listing input clock names. + Required elements: "t0_clk", "slow_clk" + Optional elements: "t1_clk", "t2_clk" +- clocks: phandles to input clocks. + +The TCB can expose multiple subdevices: + * a timer + - compatible: Should be "atmel,tcb-timer" + - reg: Should contain the TCB channels to be used. If the + counter width is 16 bits (at91rm9200-tcb), two consecutive + channels are needed. Else, only one channel will be used. + +Examples: + +One interrupt per TC block: + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + +One interrupt per TC channel in a TC block: + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffdc000 0x100>; + interrupts = <26 4>, <27 4>, <28 4>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt new file mode 100644 index 000000000000..82f82e069563 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt @@ -0,0 +1,16 @@ +Broadcom iProc Chip Device Resource Unit (CDRU) + +Various Broadcom iProc SoCs have a set of registers that provide various +chip specific device and resource configurations. This node allows access to +these CDRU registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-cdru", "syscon" for Stingray +- reg: base address and range of the CDRU registers + +Example: + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt new file mode 100644 index 000000000000..4421e9771b8a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt @@ -0,0 +1,18 @@ +Broadcom iProc Multi Host Bridge (MHB) + +Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls +the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint +interface; 3) access to the Nitro (network processing) engine + +This node allows access to these MHB registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-mhb", "syscon" for Stingray +- reg: base address and range of the MHB registers + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index 136e0c2da44d..6245c9b1a68b 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -41,7 +41,7 @@ Optional properties (all): Example for I2C: -i2c@12CA0000 { +i2c@12ca0000 { cros-ec@1e { reg = <0x1e>; compatible = "google,cros-ec-i2c"; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 741e76688cf2..0f2587fa42cb 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -19,7 +19,7 @@ Required properties: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 6a1ae3a2b77f..e6754974a745 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -127,6 +127,12 @@ Required properties for the LED child node: Optional properties for the LED child node: - label : see Documentation/devicetree/bindings/leds/common.txt +Optional nodes: +- max77693-muic : + Node used only by extcon consumers. + Required properties: + - compatible : "maxim,max77693-muic" + Example: #include <dt-bindings/leds/common.h> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt index 51fc1a60caa5..f2f3fe75901c 100644 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -18,7 +18,7 @@ Required properties: Example: - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&intc>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 39ba4146769d..8261ea73278a 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -113,7 +113,6 @@ MC13892 regulators: Examples: ecspi@70010000 { /* ECSPI1 */ - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ @@ -131,7 +130,7 @@ ecspi@70010000 { /* ECSPI1 */ #size-cells = <0>; led-control = <0x000 0x000 0x0e0 0x000>; - sysled { + sysled@3 { reg = <3>; label = "system:red:live"; linux,default-trigger = "heartbeat"; diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index bcb6abb9d413..336c0495c8a3 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -41,7 +41,7 @@ foo@1000 { compatible = "syscon", "simple-mfd"; reg = <0x01000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt new file mode 100644 index 000000000000..21b9a897fca5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt @@ -0,0 +1,40 @@ +Spreadtrum SC27xx Power Management Integrated Circuit (PMIC) + +The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730 +and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all +mobile handset power management, audio codec, battery management and user +interface support function in a single chip. It has 6 major functional +blocks: +- DCDCs to support CPU, memory. +- LDOs to support both internal and external requirement. +- Battery management system, such as charger, fuel gauge. +- Audio codec. +- User interface function, such as indicator, flash LED and so on. +- IC level interface, such as power on/off control, RTC and typec and so on. + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720" + "sprd,sc2721" + "sprd,sc2723" + "sprd,sc2730" + "sprd,sc2731" +- reg: The address of the device chip select, should be 0. +- spi-max-frequency: Typically set to 26000000. +- interrupts: The interrupt line the device is connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2. +- #address-cells: Child device offset number of cells, must be 1. +- #size-cells: Child device size number of cells, must be 0. + +Example: +pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt index badff3611a98..86dd8191b04c 100644 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt @@ -10,7 +10,7 @@ Required properties: - #io-channel-cells: shall be 0, Example: - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; @@ -47,7 +47,7 @@ Optional properties: Example: - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 03c5a551da55..dd2c06540485 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions: Example: - prcm: prcm@01f01400 { + prcm: prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index 408f768686f1..25d9e9c2fd53 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -16,9 +16,17 @@ Required properties: Optional property: - reg-io-width: the size (in bytes) of the IO accesses that should be performed on the device. +- hwlocks: reference to a phandle of a hardware spinlock provider node. Examples: -gpr: iomuxc-gpr@020e0000 { +gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; + hwlocks = <&hwlock1 1>; +}; + +hwlock1: hwspinlock@40500000 { + ... + reg = <0x40500000 0x1000>; + #hwlock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt index 20963c76b4bc..71a1f5963936 100644 --- a/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt +++ b/Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt @@ -13,7 +13,7 @@ Required properties: Example: -devctrl: device-state-control@0x02620000 { +devctrl: device-state-control@02620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index e4e1cd91fb1f..356c29789cf5 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -11,3 +11,156 @@ Required properties: The experimental -viper variants are for running Linux on the 3384's BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should be one of + "brcm,bcm7425-aon-ctrl" + "brcm,bcm7429-aon-ctrl" + "brcm,bcm7435-aon-ctrl" and + "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +syscon@410000 { + compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" +- ranges : should contain the child address in the parent address + space, must be 0 here, and the register start and length of + the entire memory controller (including all sub nodes: DDR PHY, + arbiter, etc.) +- #address-cells : must be 1 +- #size-cells : must be 1 + +Example: + + memory-controller@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges = <0x0 0x0 0xa000>; + #address-cells = <1>; + #size-cells = <1>; + + memc-arb@1000 { + ... + }; + + memc-ddr@2000 { + ... + }; + + ddr-phy@6000 { + ... + }; + }; + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v64.5" + "brcm,brcmstb-ddr-phy" + +- reg : the DDR PHY register range and length + +Example: + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v64.5"; + reg = <0x6000 0xc8>; + }; + +== DDR memory controller sequencer + +Control registers for this memory controller's DDR memory sequencer + +Required properties: +- compatible : should contain one of these + "brcm,bcm7425-memc-ddr" + "brcm,bcm7429-memc-ddr" + "brcm,bcm7435-memc-ddr" and + "brcm,brcmstb-memc-ddr" + +- reg : the DDR sequencer register range and length + +Example: + + memc-ddr@2000 { + compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x300>; + }; + +== MEMC Arbiter + +The memory controller arbiter is responsible for memory clients allocation +(bandwidth, priorities etc.) and needs to have its contents restored during +deep sleep states (S3). + +Required properties: + +- compatible : should contain one of these + "brcm,brcmstb-memc-arb-v10.0.0.0" + "brcm,brcmstb-memc-arb" + +- reg : the DDR Arbiter register range and length + +Example: + + memc-arb@1000 { + compatible = "brcm,brcmstb-memc-arb-v10.0.0.0"; + reg = <0x1000 0x248>; + }; + +== Timers + +The Broadcom STB chips contain a timer block with several general purpose +timers that can be used. + +Required properties: + +- compatible : should contain one of: + "brcm,bcm7425-timers" + "brcm,bcm7429-timers" + "brcm,bcm7435-timers and + "brcm,brcmstb-timers" +- reg : the timers register range +- interrupts : the interrupt line for this timer block + +Example: + + timers: timer@4067c0 { + compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers"; + reg = <0x4067c0 0x40>; + interrupts = <&periph_intc 19>; + }; diff --git a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt index 6c9f176f3571..05b47232ed9e 100644 --- a/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt +++ b/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt @@ -9,7 +9,7 @@ Required properties: - reg : Location and size of bounce buffer Example: - smc@0x3404c000 { + smc@3404c000 { compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; reg = <0x3404c000 0x400>; //1 KiB in SRAM }; diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt new file mode 100644 index 000000000000..77df94d7a32f --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.txt @@ -0,0 +1,26 @@ +* GE Healthcare USB Management Controller + +A device which handles data aquisition from compatible USB based peripherals. +SPI is used for device management. + +Note: This device does not expose the peripherals as USB devices. + +Required properties: + +- compatible : Should be "ge,achc" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 1MHz for the GE ACHC. + +Example: + +spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt new file mode 100644 index 000000000000..892ba4384abc --- /dev/null +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt @@ -0,0 +1,12 @@ +NVIDIA Tegra186 MISC register block + +The MISC register block found on Tegra186 SoCs contains registers that can be +used to identify a given chip and various strapping options. + +Required properties: +- compatible: Must be: + - Tegra186: "nvidia,tegra186-misc" +- reg: Should contain 2 entries: The first entry gives the physical address + and length of the register region which contains revision and debug + features. The second entry specifies the physical address and length + of the register region indicating the strapping options. diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt new file mode 100644 index 000000000000..8765c605e6bc --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt @@ -0,0 +1,54 @@ +* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller + +The highspeed MMC host controller on Amlogic SoCs provides an interface +for MMC, SD, SDIO and SDHC types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 2.0. + +The hardware provides an internal "mux" which allows up to three slots +to be controlled. Only one slot can be accessed at a time. + +Required properties: + - compatible : must be one of + - "amlogic,meson8-sdio" + - "amlogic,meson8b-sdio" + along with the generic "amlogic,meson-mx-sdio" + - reg : mmc controller base registers + - interrupts : mmc controller interrupt + - #address-cells : must be 1 + - size-cells : must be 0 + - clocks : phandle to clock providers + - clock-names : must contain "core" and "clkin" + +Required child nodes: +A node for each slot provided by the MMC controller is required. +NOTE: due to a driver limitation currently only one slot (= child node) + is supported! + +Required properties on each child node (= slot): + - compatible : must be "mmc-slot" (see mmc.txt within this directory) + - reg : the slot (or "port") ID + +Optional properties on each child node (= slot): + - bus-width : must be 1 or 4 (8-bit bus is not supported) + - for cd and all other additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + mmc@c1108c20 { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + reg = <0xc1108c20 0x20>; + interrupts = <0 28 1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; + + slot@1 { + compatible = "mmc-slot"; + reg = <1>; + + bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt index aaba2483b4ff..7f5dd83f5bd9 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt @@ -12,7 +12,7 @@ Refer to clocks/clock-bindings.txt for generic clock consumer properties. Example: -sdio2: sdio@0x3f1a0000 { +sdio2: sdio@3f1a0000 { compatible = "brcm,kona-sdhci"; reg = <0x3f1a0000 0x10000>; clocks = <&sdio3_clk>; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt index 954561d09a8e..fa90d253dc7e 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -24,7 +24,7 @@ Optional properties: Example: -sdhci0: sdhci@0x18041000 { +sdhci0: sdhci@18041000 { compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x18041000 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index b32ade645ad9..467cd7b147ce 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -53,6 +53,9 @@ Optional properties: - no-sdio: controller is limited to send sdio cmd during initialization - no-sd: controller is limited to send sd cmd during initialization - no-mmc: controller is limited to send mmc cmd during initialization +- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. + The value <n> is the driver type as specified in the eMMC specification + (table 206 in spec version 5.1). *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" @@ -64,10 +67,10 @@ logic applies to the "wp-inverted" property. CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs, specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of dedicated pins can be specified, using *-inverted properties. GPIO polarity can -also be specified using the OF_GPIO_ACTIVE_LOW flag. This creates an ambiguity +also be specified using the GPIO_ACTIVE_LOW flag. This creates an ambiguity in the latter case. We choose to use the XOR logic for GPIO CD and WP lines. This means, the two properties are "superimposed," for example leaving the -OF_GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted +GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted property property results in a double-inversion and actually means the "normal" line polarity is in effect. @@ -143,7 +146,7 @@ sdhci@ab000000 { Example with sdio function subnode: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 4182ea36ca5b..9b8017670870 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -7,10 +7,20 @@ This file documents differences between the core properties in mmc.txt and the properties used by the msdc driver. Required properties: -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 + "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC + +- reg: physical base address of the controller and length - interrupts: Should contain MSDC interrupt number -- clocks: MSDC source clock, HCLK -- clock-names: "source", "hclk" +- clocks: Should contain phandle for the clock feeding the MMC controller +- clock-names: Should contain the following: + "source" - source clock (required) + "hclk" - HCLK which used for host (required) + "source_cg" - independent source clock gate (required for MT2712) - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl @@ -30,6 +40,10 @@ Optional properties: - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection If present,HS400 command responses are sampled on rising edges. If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) + Valid range = [0:0x7]. if not present, default value is 0. + applied to compatible "mediatek,mt2701-mmc". Examples: mmc0: mmc@11230000 { diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt index de2c53cff4f1..3ee9263adf73 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt @@ -15,6 +15,8 @@ Required properties: Optional properties: - vqmmc-supply: phandle to the regulator device tree node, mentioned as the VCCQ/VDD_IO supply in the eMMC/SD specs. +- fujitsu,cmd-dat-delay-select: boolean property indicating that this host + requires the CMD_DAT_DELAY control to be enabled. Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 0576264eab5e..bfdcdc4ccdff 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -18,6 +18,8 @@ Required properties: "core" - SDC MMC clock (MCLK) (required) "bus" - SDCC bus voter clock (optional) "xo" - TCXO clock (optional) + "cal" - reference clock for RCLK delay calibration (optional) + "sleep" - sleep clock for RCLK delay calibration (optional) Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt new file mode 100644 index 000000000000..51775a372c06 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -0,0 +1,16 @@ +* TI OMAP SDHCI Controller + +Refer to mmc.txt for standard MMC bindings. + +Required properties: +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 + +Example: + mmc1: mmc@4809c000 { + compatible = "ti,dra7-sdhci"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index e35645598315..6b3d40ca395e 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 { /* Example SD stih407 family configuration */ -mmc1: sdhci@09080000 { +mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; @@ -90,7 +90,7 @@ mmc1: sdhci@09080000 { /* Example eMMC stih407 family configuration */ -mmc0: sdhci@09060000 { +mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 63b57e2a10fb..132e0007d7d6 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -29,7 +29,7 @@ Optional properties: Examples: - Within .dtsi: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; @@ -39,7 +39,7 @@ Examples: }; - Within dts: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { pinctrl-names = "default", "default"; pinctrl-0 = <&mmc0_pins_a>; pinctrl-1 = <&mmc0_cd_pin_reference_design>; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 3a4ac401e6f9..19f5508a7569 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -55,7 +55,7 @@ Examples: [hwmod populated DMA resources] - mmc1: mmc@0x4809c000 { + mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; @@ -67,7 +67,7 @@ Examples: [generic DMA request binding] - mmc1: mmc@0x4809c000 { + mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; ti,hwmods = "mmc1"; diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 54ef642f23a0..d8685cb83325 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -10,7 +10,7 @@ described in mmc.txt, can be used. Additionally the following tmio_mmc-specific optional bindings can be used. Required properties: -- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit +- compatible: should contain one or more of the following: "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC @@ -26,6 +26,17 @@ Required properties: "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC + "renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC + "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller + "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller + "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1 + SDHI controller + "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller + + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. - clocks: Most controllers only have 1 clock source per channel. However, on some variations of this controller, the internal card detection @@ -43,3 +54,61 @@ Optional properties: - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl + +Example: R8A7790 (R-Car H2) SDHI controller nodes + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee120000 0 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index f248056da24c..bb2075df9b38 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -1,7 +1,9 @@ * Cadence Quad SPI controller Required properties: -- compatible : Should be "cdns,qspi-nor". +- compatible : should be one of the following: + Generic default - "cdns,qspi-nor". + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the @@ -14,6 +16,9 @@ Required properties: Optional properties: - cdns,is-decoded-cs : Flag to indicate whether decoder is used or not. +- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch + the read data rather than the QSPI clock. Make sure that QSPI return + clock is populated on the board before using this property. Optional subnodes: Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index 504291d2e5c2..0ee8edb60efc 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -29,7 +29,7 @@ nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; compatible = "altr,socfpga-denali-nand"; - reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; + reg = <0xff900000 0x20>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; }; diff --git a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt index c34aa6f8a424..63d4d626fbd5 100644 --- a/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt @@ -12,7 +12,7 @@ Required properties: - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" - interrupts : Should contain the interrupt for the device - clocks : The clocks needed by the QuadSPI controller - - clock-names : the name of the clocks + - clock-names : Should contain the name of the clocks: "qspi_en" and "qspi". Optional properties: - fsl,qspi-has-second-chip: The controller has two buses, bus A and bus B. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 131d3a74d0bd..c8567b40fe13 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -82,15 +82,15 @@ gpmc: gpmc@6e000000 { label = "bootloader-nor"; reg = <0 0x40000>; }; - partition@0x40000 { + partition@40000 { label = "params-nor"; reg = <0x40000 0x40000>; }; - partition@0x80000 { + partition@80000 { label = "kernel-nor"; reg = <0x80000 0x200000>; }; - partition@0x280000 { + partition@280000 { label = "filesystem-nor"; reg = <0x240000 0x7d80000>; }; diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index b6e8bfd024f4..e9f01a963a0a 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -9,13 +9,14 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: + - compatible: "ti,omap2-onenand" - reg: The CS line the peripheral is connected to - - gpmc,device-width Width of the ONENAND device connected to the GPMC + - gpmc,device-width: Width of the ONENAND device connected to the GPMC in bytes. Must be 1 or 2. Optional properties: - - dma-channel: DMA Channel index + - int-gpios: GPIO specifier for the INT pin. For inline partition table parsing (optional): @@ -35,6 +36,7 @@ Example for an OMAP3430 board: #size-cells = <1>; onenand@0 { + compatible = "ti,omap2-onenand"; reg = <0 0 0>; /* CS0, offset 0 */ gpmc,device-width = <2>; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 9ce35af8507c..956bb046e599 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -13,6 +13,7 @@ Required properties: at25df321a at25df641 at26df081a + mr25h128 mr25h256 mr25h10 mr25h40 diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt index d0a37252eb22..6d60bc3063f5 100644 --- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt @@ -23,7 +23,7 @@ Optional subnodes: Example: - mlc: flash@200A8000 { + mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; reg = <0x200A8000 0x11000>; interrupts = <11 0>; diff --git a/Documentation/devicetree/bindings/mtd/marvell-nand.txt b/Documentation/devicetree/bindings/mtd/marvell-nand.txt new file mode 100644 index 000000000000..c08fb477b3c6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/marvell-nand.txt @@ -0,0 +1,123 @@ +Marvell NAND Flash Controller (NFC) + +Required properties: +- compatible: can be one of the following: + * "marvell,armada-8k-nand-controller" + * "marvell,armada370-nand-controller" + * "marvell,pxa3xx-nand-controller" + * "marvell,armada-8k-nand" (deprecated) + * "marvell,armada370-nand" (deprecated) + * "marvell,pxa3xx-nand" (deprecated) + Compatibles marked deprecated support only the old bindings described + at the bottom. +- reg: NAND flash controller memory area. +- #address-cells: shall be set to 1. Encode the NAND CS. +- #size-cells: shall be set to 0. +- interrupts: shall define the NAND controller interrupt. +- clocks: shall reference the NAND controller clock. +- marvell,system-controller: Set to retrieve the syscon node that handles + NAND controller related registers (only required with the + "marvell,armada-8k-nand[-controller]" compatibles). + +Optional properties: +- label: see partition.txt. New platforms shall omit this property. +- dmas: shall reference DMA channel associated to the NAND controller. + This property is only used with "marvell,pxa3xx-nand[-controller]" + compatible strings. +- dma-names: shall be "rxtx". + This property is only used with "marvell,pxa3xx-nand[-controller]" + compatible strings. + +Optional children nodes: +Children nodes represent the available NAND chips. + +Required properties: +- reg: shall contain the native Chip Select ids (0-3). +- nand-rb: see nand.txt (0-1). + +Optional properties: +- marvell,nand-keep-config: orders the driver not to take the timings + from the core and leaving them completely untouched. Bootloader + timings will then be used. +- label: MTD name. +- nand-on-flash-bbt: see nand.txt. +- nand-ecc-mode: see nand.txt. Will use hardware ECC if not specified. +- nand-ecc-algo: see nand.txt. This property is essentially useful when + not using hardware ECC. Howerver, it may be added when using hardware + ECC for clarification but will be ignored by the driver because ECC + mode is chosen depending on the page size and the strength required by + the NAND chip. This value may be overwritten with nand-ecc-strength + property. +- nand-ecc-strength: see nand.txt. +- nand-ecc-step-size: see nand.txt. Marvell's NAND flash controller does + use fixed strength (1-bit for Hamming, 16-bit for BCH), so the actual + step size will shrink or grow in order to fit the required strength. + Step sizes are not completely random for all and follow certain + patterns described in AN-379, "Marvell SoC NFC ECC". + +See Documentation/devicetree/bindings/mtd/nand.txt for more details on +generic bindings. + + +Example: +nand_controller: nand-controller@d0000 { + compatible = "marvell,armada370-nand-controller"; + reg = <0xd0000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&coredivclk 0>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Rootfs"; + reg = <0x00000000 0x40000000>; + }; + }; + }; +}; + + +Note on legacy bindings: One can find, in not-updated device trees, +bindings slightly different than described above with other properties +described below as well as the partitions node at the root of a so +called "nand" node (without clear controller/chip separation). + +Legacy properties: +- marvell,nand-enable-arbiter: To enable the arbiter, all boards blindly + used it, this bit was set by the bootloader for many boards and even if + it is marked reserved in several datasheets, it might be needed to set + it (otherwise it is harmless) so whether or not this property is set, + the bit is selected by the driver. +- num-cs: Number of chip-select lines to use, all boards blindly set 1 + to this and for a reason, other values would have failed. The value of + this property is ignored. + +Example: + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + dmas = <&pdma 97 0>; + dma-names = "rxtx"; + #address-cells = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + num-cs = <1>; + /* Partitions (optional) */ + }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index dbf9e054c11c..1c88526dedfc 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -12,8 +12,10 @@ tree nodes. The first part of NFC is NAND Controller Interface (NFI) HW. Required NFI properties: -- compatible: Should be one of "mediatek,mt2701-nfc", - "mediatek,mt2712-nfc". +- compatible: Should be one of + "mediatek,mt2701-nfc", + "mediatek,mt2712-nfc", + "mediatek,mt7622-nfc". - reg: Base physical address and size of NFI. - interrupts: Interrupts of NFI. - clocks: NFI required clocks. @@ -131,7 +133,7 @@ Example: read-only; reg = <0x00000000 0x00400000>; }; - android@0x00400000 { + android@00400000 { label = "android"; reg = <0x00400000 0x12c00000>; }; @@ -142,7 +144,10 @@ Example: ============== Required BCH properties: -- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc". +- compatible: Should be one of + "mediatek,mt2701-ecc", + "mediatek,mt2712-ecc", + "mediatek,mt7622-ecc". - reg: Base physical address and size of ECC. - interrupts: Interrupts of ECC. - clocks: ECC required clocks. diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 840f9405dcf0..56d3668e2c50 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -1,13 +1,16 @@ * Serial NOR flash controller for MTK MT81xx (and similar) Required properties: -- compatible: The possible values are: - "mediatek,mt2701-nor" - "mediatek,mt7623-nor" +- compatible: For mt8173, compatible should be "mediatek,mt8173-nor", + and it's the fallback compatible for other Soc. + For every other SoC, should contain both the SoC-specific compatible + string and "mediatek,mt8173-nor". + The possible values are: + "mediatek,mt2701-nor", "mediatek,mt8173-nor" + "mediatek,mt2712-nor", "mediatek,mt8173-nor" + "mediatek,mt7622-nor", "mediatek,mt8173-nor" + "mediatek,mt7623-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - For mt8173, compatible should be "mediatek,mt8173-nor". - For every other SoC, should contain both the SoC-specific compatible string - and "mediatek,mt8173-nor". - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index 133f3813719c..8bb11d809429 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -43,6 +43,7 @@ Optional NAND chip properties: This is particularly useful when only the in-band area is used by the upper layers, and you want to make your NAND as reliable as possible. +- nand-rb: shall contain the native Ready/Busy ids. The ECC strength and ECC step size properties define the correction capability of a controller. Together, they say a controller can correct "{strength} bit diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index d9b655f11048..d4ee4da58463 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -5,9 +5,13 @@ Required properties: - compatible: Should be set to one of the following: marvell,pxa3xx-nand marvell,armada370-nand + marvell,armada-8k-nand - reg: The register base for the controller - interrupts: The interrupt to map - #address-cells: Set to <1> if the node includes partitions + - marvell,system-controller: Set to retrieve the syscon node that handles + NAND controller related registers (only required + with marvell,armada-8k-nand compatible). Optional properties: diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index a37c67bcb43b..5e13a5cdff03 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -31,7 +31,7 @@ see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. Examples: -nfc: nand@01c03000 { +nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <0 37 1>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt index 10640b17c866..e98118aef5f6 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt @@ -10,7 +10,7 @@ Required properties: Example: -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt index 4ec56413779d..ab5b8613b0ef 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt @@ -9,7 +9,7 @@ Optional properties: - phy-supply: phandle to a regulator if the PHY needs one Example at the SoC level: -mdio@01c0b080 { +mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; #address-cells = <1>; @@ -18,7 +18,7 @@ mdio@01c0b080 { And at the board level: -mdio@01c0b080 { +mdio@1c0b080 { phy-supply = <®_emac_3v3>; phy0: ethernet-phy@0 { diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt index ea4d752389a2..8b3f953656e3 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - gmac: ethernet@01c50000 { + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>, <0x01c20164 0x4>; diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt index a706297998e9..0e21df94a53f 100644 --- a/Documentation/devicetree/bindings/net/altera_tse.txt +++ b/Documentation/devicetree/bindings/net/altera_tse.txt @@ -52,7 +52,7 @@ Optional properties: Example: - tse_sub_0_eth_tse_0: ethernet@0x1,00000000 { + tse_sub_0_eth_tse_0: ethernet@1,00000000 { compatible = "altr,tse-msgdma-1.0"; reg = <0x00000001 0x00000000 0x00000400>, <0x00000001 0x00000460 0x00000020>, @@ -90,7 +90,7 @@ Example: }; }; - tse_sub_1_eth_tse_0: ethernet@0x1,00001000 { + tse_sub_1_eth_tse_0: ethernet@1,00001000 { compatible = "altr,tse-msgdma-1.0"; reg = <0x00000001 0x00001000 0x00000400>, <0x00000001 0x00001460 0x00000020>, diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt new file mode 100644 index 000000000000..94797df751b8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth.txt @@ -0,0 +1,5 @@ +The following properties are common to the Bluetooth controllers: + +- local-bd-address: array of 6 bytes, specifies the BD address that was + uniquely assigned to the Bluetooth device, formatted with least significant + byte first (little-endian). diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 9a734d808aa7..b7336b9d6a3c 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -2,7 +2,10 @@ Required properties: -- compatible: should be "brcm,bcm7445-switch-v4.0" or "brcm,bcm7278-switch-v4.0" +- compatible: should be one of + "brcm,bcm7445-switch-v4.0" + "brcm,bcm7278-switch-v4.0" + "brcm,bcm7278-switch-v4.8" - reg: addresses and length of the register sets for the device, must be 6 pairs of register addresses and lengths - interrupts: interrupts for the devices, must be two interrupts diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 26c77d985faf..3956af1d30f3 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -109,7 +109,7 @@ ethernet@f0ba0000 { reg = <0xf0ba0000 0xfc4c>; interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - mdio@0e14 { + mdio@e14 { compatible = "brcm,genet-mdio-v4"; #address-cells = <0x1>; #size-cells = <0x0>; diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.txt b/Documentation/devicetree/bindings/net/can/can-transceiver.txt new file mode 100644 index 000000000000..0011f53ff159 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.txt @@ -0,0 +1,24 @@ +Generic CAN transceiver Device Tree binding +------------------------------ + +CAN transceiver typically limits the max speed in standard CAN and CAN FD +modes. Typically these limitations are static and the transceivers themselves +provide no way to detect this limitation at runtime. For this situation, +the "can-transceiver" node can be used. + +Required Properties: + max-bitrate: a positive non 0 value that determines the max + speed that CAN/CAN-FD can run. Any other value + will be ignored. + +Examples: + +Based on Texas Instrument's TCAN1042HGV CAN Transceiver + +m_can0 { + .... + can-transceiver { + max-bitrate = <5000000>; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index 56d6cc336e1c..bfc0c433654f 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -18,6 +18,12 @@ Optional properties: - xceiver-supply: Regulator that powers the CAN transceiver +- big-endian: This means the registers of FlexCAN controller are big endian. + This is optional property.i.e. if this property is not present in + device tree node then controller is assumed to be little endian. + if this property is present then controller is assumed to be big + endian. + Example: can@1c000 { diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 78138333ff7a..ed614383af9c 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -43,9 +43,14 @@ Required properties: Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. +Optional Subnode: +- can-transceiver : Can-transceiver subnode describing maximum speed + that can be used for CAN/CAN-FD modes. See + Documentation/devicetree/bindings/net/can/can-transceiver.txt + for details. Example: SoC dtsi: -m_can1: can@020e8000 { +m_can1: can@20e8000 { compatible = "bosch,m_can"; reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; reg-names = "m_can", "message_ram"; @@ -63,4 +68,8 @@ Board dts: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_m_can1>; status = "enabled"; + + can-transceiver { + max-bitrate = <5000000>; + }; }; diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt index 06bb7cc334c8..94a7f33ac5e9 100644 --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt @@ -2,7 +2,9 @@ Renesas R-Car CAN controller Device Tree Bindings ------------------------------------------------- Required properties: -- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. +- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC. + "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC. + "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC. "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC. "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC. "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC. @@ -12,7 +14,8 @@ Required properties: "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. - "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device. + "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1 + compatible device. "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt index 84ed1909df76..f69845e6feaf 100644 --- a/Documentation/devicetree/bindings/net/can/sun4i_can.txt +++ b/Documentation/devicetree/bindings/net/can/sun4i_can.txt @@ -19,7 +19,7 @@ SoC common .dtsi file: allwinner,pull = <0>; }; ... - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = <0 26 4>; @@ -29,7 +29,7 @@ SoC common .dtsi file: Board specific .dts file: - can0: can@01c2bc00 { + can0: can@1c2bc00 { pinctrl-names = "default"; pinctrl-0 = <&can0_pins_a>; status = "okay"; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt new file mode 100644 index 000000000000..6c559981d110 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt @@ -0,0 +1,92 @@ +Cortina Systems Gemini Ethernet Controller +========================================== + +This ethernet controller is found in the Gemini SoC family: +StorLink SL3512 and SL3516, also known as Cortina Systems +CS3512 and CS3516. + +Required properties: +- compatible: must be "cortina,gemini-ethernet" +- reg: must contain the global registers and the V-bit and A-bit + memory areas, in total three register sets. +- syscon: a phandle to the system controller +- #address-cells: must be specified, must be <1> +- #size-cells: must be specified, must be <1> +- ranges: should be state like this giving a 1:1 address translation + for the subnodes + +The subnodes represents the two ethernet ports in this device. +They are not independent of each other since they share resources +in the parent node, and are thus children. + +Required subnodes: +- port0: contains the resources for ethernet port 0 +- port1: contains the resources for ethernet port 1 + +Required subnode properties: +- compatible: must be "cortina,gemini-ethernet-port" +- reg: must contain two register areas: the DMA/TOE memory and + the GMAC memory area of the port +- interrupts: should contain the interrupt line of the port. + this is nominally a level interrupt active high. +- resets: this must provide an SoC-integrated reset line for + the port. +- clocks: this should contain a handle to the PCLK clock for + clocking the silicon in this port +- clock-names: must be "PCLK" + +Optional subnode properties: +- phy-mode: see ethernet.txt +- phy-handle: see ethernet.txt + +Example: + +mdio-bus { + (...) + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; +}; + + +ethernet@60000000 { + compatible = "cortina,gemini-ethernet"; + reg = <0x60000000 0x4000>, /* Global registers, queue */ + <0x60004000 0x2000>, /* V-bit */ + <0x60006000 0x2000>; /* A-bit */ + syscon = <&syscon>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gmac0: ethernet-port@0 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ + <0x6000a000 0x2000>; /* Port 0 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC0>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + gmac1: ethernet-port@1 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ + <0x6000e000 0x2000>; /* Port 1 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC1>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index 7cc15c96ea95..4cb4925a28ab 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -61,7 +61,7 @@ file. Examples: - mac: ethernet@4A100000 { + mac: ethernet@4a100000 { compatible = "ti,cpsw"; reg = <0x4A100000 0x1000>; interrupts = <55 0x4>; @@ -91,7 +91,7 @@ Examples: }; (or) - mac: ethernet@4A100000 { + mac: ethernet@4a100000 { compatible = "ti,cpsw"; ti,hwmods = "cpgmac0"; cpdma_channels = <8>; diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt index 621156ca4ffd..e6527de80f10 100644 --- a/Documentation/devicetree/bindings/net/davinci-mdio.txt +++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt @@ -21,7 +21,7 @@ file. Examples: - mdio: davinci_mdio@4A101000 { + mdio: davinci_mdio@4a101000 { compatible = "ti,davinci_mdio"; reg = <0x4A101000 0x1000>; bus_freq = <1000000>; @@ -29,7 +29,7 @@ Examples: (or) - mdio: davinci_mdio@4A101000 { + mdio: davinci_mdio@4a101000 { compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 4448d063ddf6..464d6bf87605 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -52,7 +52,7 @@ I2C managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ @@ -89,7 +89,7 @@ MDIO managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 000000000000..3d6d5fa0c4d5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,207 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: must be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun8i-v3s-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: must be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: must be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: must be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. They control the delay for +external PHY. + +Optional properties for the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" must be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +The following compatibles require that the emac node have a mdio-mux child +node called "mdio-mux": + - "allwinner,sun8i-h3-emac" + - "allwinner,sun8i-v3s-emac": +Required properties for the mdio-mux node: + - compatible = "allwinner,sun8i-h3-mdio-mux" + - mdio-parent-bus: a phandle to EMAC mdio + - one child mdio for the integrated mdio with the compatible + "allwinner,sun8i-h3-mdio-internal" + - one child mdio for the external mdio if present (V3s have none) +Required properties for the mdio-mux children node: + - reg: 1 for internal MDIO bus, 2 for external MDIO bus + +The following compatibles require a PHY node representing the integrated +PHY, under the integrated MDIO bus node if an mdio-mux node is used: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": + +Additional information regarding generic multiplexer properties can be found +at Documentation/devicetree/bindings/net/mdio-mux.txt + +Required properties of the integrated phy node: +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY +- Must be a child of the integrated mdio + +Example with integrated PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + phy-is-integrated; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +Example with external PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }: + }; +}; + +Example with SoC without integrated PHY + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 6f55bdd52f8a..2d41fb96ce0a 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -34,6 +34,19 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. + -interrupt-names: names of the interrupts listed in interrupts property in + the same order. The defaults if not specified are + __Number of interrupts__ __Default__ + 1 "int0" + 2 "int0", "pps" + 3 "int0", "int1", "int2" + 4 "int0", "int1", "int2", "pps" + The order may be changed as long as they correspond to the interrupts + property. Currently, only i.mx7 uses "int1" and "int2". They correspond to + tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts. + For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse + per second interrupt associated with 1588 precision time protocol(PTP). + Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes @@ -46,7 +59,7 @@ ethernet@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; phy-supply = <®_fec_supply>; }; @@ -58,7 +71,7 @@ ethernet@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; phy-supply = <®_fec_supply>; phy-handle = <ðphy>; diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index db74f0dc290c..594982c6b9f9 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -136,7 +136,7 @@ Clock Properties: Example: - ptp_clock@24E00 { + ptp_clock@24e00 { compatible = "fsl,etsec-ptp"; reg = <0x24E00 0xB0>; interrupts = <12 0x8 13 0x8>; diff --git a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt index dea5124cdc52..d24172cc6d32 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/adf7242.txt @@ -1,7 +1,7 @@ * ADF7242 IEEE 802.15.4 * Required properties: - - compatible: should be "adi,adf7242" + - compatible: should be "adi,adf7242", "adi,adf7241" - spi-max-frequency: maximal bus speed (12.5 MHz) - reg: the chipselect index - interrupts: the interrupt generated by the device via pin IRQ1. diff --git a/Documentation/devicetree/bindings/net/mdio.txt b/Documentation/devicetree/bindings/net/mdio.txt index 96a53f89aa6e..e3e1603f256c 100644 --- a/Documentation/devicetree/bindings/net/mdio.txt +++ b/Documentation/devicetree/bindings/net/mdio.txt @@ -18,7 +18,7 @@ Example : This example shows these optional properties, plus other properties required for the TI Davinci MDIO driver. - davinci_mdio: ethernet@0x5c030000 { + davinci_mdio: ethernet@5c030000 { compatible = "ti,davinci_mdio"; reg = <0x5c030000 0x1000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt index 214eaa9a6683..53c13ee384a4 100644 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -28,7 +28,7 @@ Required properties: - mediatek,sgmiisys: phandle to the syscon node that handles the SGMII setup which is required for those SoCs equipped with SGMII such as MT7622 SoC. - mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current + and driver current: only for MT2701 and MT7623 SoC Optional properties: - interrupt-parent: Should be the phandle for the interrupt controller diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 77d0b2a61ffa..d2169a56f5e3 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -53,6 +53,14 @@ Optional Properties: to ensure the integrated PHY is used. The absence of this property indicates the muxers should be configured so that the external PHY is used. +- reset-gpios: The GPIO phandle and specifier for the PHY reset signal. + +- reset-assert-us: Delay after the reset was asserted in microseconds. + If this property is missing the delay will be skipped. + +- reset-deassert-us: Delay after the reset was deasserted in microseconds. + If this property is missing the delay will be skipped. + Example: ethernet-phy@0 { @@ -60,4 +68,8 @@ ethernet-phy@0 { interrupt-parent = <&PIC>; interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; + + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + reset-assert-us = <1000>; + reset-deassert-us = <2000>; }; diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 16723535e1aa..c902261893b9 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-r8a77970" for the R8A77970 SoC. + - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above R-Car Gen3 devices. @@ -40,7 +42,7 @@ Optional properties: - interrupt-parent: the phandle for the interrupt controller that services interrupts for this device. - interrupt-names: A list of interrupt names. - For the R8A779[56] SoCs this property is mandatory; + For the R-Car Gen 3 SoCs this property is mandatory; it should include one entry per channel, named "ch%u", where %u is the channel number ranging from 0 to 24. For other SoCs this property is optional; if present diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt index 60e970ce10ee..f1c441bedf68 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.txt +++ b/Documentation/devicetree/bindings/net/sff,sfp.txt @@ -3,7 +3,9 @@ Transceiver Required properties: -- compatible : must be "sff,sfp" +- compatible : must be one of + "sff,sfp" for SFP modules + "sff,sff" for soldered down SFF modules Optional Properties: @@ -11,7 +13,8 @@ Optional Properties: interface - mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) - module presence input gpio signal, active (module absent) high + module presence input gpio signal, active (module absent) high. Must + not be present for SFF modules - los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high @@ -24,10 +27,11 @@ Optional Properties: - rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate + Must not be present for SFF modules - rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high: - high Tx rate + high Tx rate. Must not be present for SFF modules Example #1: Direct serdes to SFP connection diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt index 0115c85a2425..5172799a7f1a 100644 --- a/Documentation/devicetree/bindings/net/sh_eth.txt +++ b/Documentation/devicetree/bindings/net/sh_eth.txt @@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC interface contains. Required properties: -- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. +- compatible: Must contain one or more of the following: + "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. "renesas,ether-r8a7743" if the device is a part of R8A7743 SoC. "renesas,ether-r8a7745" if the device is a part of R8A7745 SoC. "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC. @@ -14,6 +15,14 @@ Required properties: "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC. "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC. "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC. + "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device. + "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1 + device. + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. + - reg: offset and length of (1) the E-DMAC/feLic register block (required), (2) the TSU register block (optional). - interrupts: interrupt specifier for the sole interrupt. @@ -36,7 +45,8 @@ Optional properties: Example (Lager board): ethernet@ee700000 { - compatible = "renesas,ether-r8a7790"; + compatible = "renesas,ether-r8a7790", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupt-parent = <&gic>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index b30d04b54ee9..17d6819669c8 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -28,7 +28,7 @@ Required properties: Example: -gmii_to_sgmii_converter: phy@0x100000240 { +gmii_to_sgmii_converter: phy@100000240 { compatible = "altr,gmii-to-sgmii-2.0"; reg = <0x00000001 0x00000240 0x00000008>, <0x00000001 0x00000200 0x00000040>; diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt new file mode 100644 index 000000000000..270ea4efff13 --- /dev/null +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt @@ -0,0 +1,48 @@ +* Socionext AVE ethernet controller + +This describes the devicetree bindings for AVE ethernet controller +implemented on Socionext UniPhier SoCs. + +Required properties: + - compatible: Should be + - "socionext,uniphier-pro4-ave4" : for Pro4 SoC + - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC + - "socionext,uniphier-ld11-ave4" : for LD11 SoC + - "socionext,uniphier-ld20-ave4" : for LD20 SoC + - reg: Address where registers are mapped and size of region. + - interrupts: Should contain the MAC interrupt. + - phy-mode: See ethernet.txt in the same directory. Allow to choose + "rgmii", "rmii", or "mii" according to the PHY. + - phy-handle: Should point to the external phy device. + See ethernet.txt file in the same directory. + - clocks: A phandle to the clock for the MAC. + +Optional properties: + - resets: A phandle to the reset control for the MAC. + - local-mac-address: See ethernet.txt in the same directory. + +Required subnode: + - mdio: A container for child nodes representing phy nodes. + See phy.txt in the same directory. + +Example: + + ether: ethernet@65000000 { + compatible = "socionext,uniphier-ld20-ave4"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + phy-mode = "rgmii"; + phy-handle = <ðphy>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + local-mac-address = [00 00 00 00 00 00]; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethphy@1 { + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt new file mode 100644 index 000000000000..0cff94fb0433 --- /dev/null +++ b/Documentation/devicetree/bindings/net/socionext-netsec.txt @@ -0,0 +1,53 @@ +* Socionext NetSec Ethernet Controller IP + +Required properties: +- compatible: Should be "socionext,synquacer-netsec" +- reg: Address and length of the control register area, followed by the + address and length of the EEPROM holding the MAC address and + microengine firmware +- interrupts: Should contain ethernet controller interrupt +- clocks: phandle to the PHY reference clock +- clock-names: Should be "phy_ref_clk" +- phy-mode: See ethernet.txt file in the same directory +- phy-handle: See ethernet.txt in the same directory. + +- mdio device tree subnode: When the Netsec has a phy connected to its local + mdio, there must be device tree subnode with the following + required properties: + + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. + + For each phy on the mdio bus, there must be a node with the following + fields: + - compatible: Refer to phy.txt + - reg: phy id used to communicate to phy. + +Optional properties: (See ethernet.txt file in the same directory) +- dma-coherent: Boolean property, must only be present if memory + accesses performed by the device are cache coherent. +- local-mac-address: See ethernet.txt in the same directory. +- mac-address: See ethernet.txt in the same directory. +- max-speed: See ethernet.txt in the same directory. +- max-frame-size: See ethernet.txt in the same directory. + +Example: + eth0: ethernet@522d0000 { + compatible = "socionext,synquacer-netsec"; + reg = <0 0x522d0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_netsec>; + clock-names = "phy_ref_clk"; + phy-mode = "rgmii"; + max-speed = <1000>; + max-frame-size = <9000>; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index c3a7be6615c5..3a28a5d8857d 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -12,7 +12,7 @@ Required properties: Valid interrupt names are: - "macirq" (combined signal for various interrupt events) - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state) + - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) - phy-mode: See ethernet.txt file in the same directory. - snps,reset-gpio gpio number for phy reset. - snps,reset-active-low boolean flag to indicate if phy reset is active low. diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt index 1649c1f66b07..6d03ff8c7068 100644 --- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt +++ b/Documentation/devicetree/bindings/net/ti-bluetooth.txt @@ -1,10 +1,18 @@ -TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices +Texas Instruments Bluetooth Chips +--------------------------------- + +This documents the binding structure and common properties for serial +attached TI Bluetooth devices. The following chips are included in this +binding: + +* TI CC256x Bluetooth devices +* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices TI WiLink devices have a UART interface for providing Bluetooth, FM radio, and GPS over what's called "shared transport". The shared transport is standard BT HCI protocol with additional channels for the other functions. -These devices also have a separate WiFi interface as described in +TI WiLink devices also have a separate WiFi interface as described in wireless/ti,wlcore.txt. This bindings follows the UART slave device binding in @@ -12,6 +20,7 @@ This bindings follows the UART slave device binding in Required properties: - compatible: should be one of the following: + "ti,cc2560" "ti,wl1271-st" "ti,wl1273-st" "ti,wl1281-st" @@ -32,6 +41,9 @@ Optional properties: See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entry: "ext_clock" (External clock provided to the TI combo chip). + - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address + with the most significant byte first (big-endian). + - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) Example: @@ -43,5 +55,7 @@ Example: enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; clocks = <&clk32k_wl18xx>; clock-names = "ext_clock"; + nvmem-cells = <&bd_address>; + nvmem-cell-names = "bd-address"; }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index b2bd4704f859..86602f264dce 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -20,7 +20,7 @@ Optional properties: Example: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt new file mode 100644 index 000000000000..0c17a0ec9b7b --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.txt @@ -0,0 +1,32 @@ +* MediaTek mt76xx devices + +This node provides properties for configuring the MediaTek mt76xx wireless +device. The node is expected to be specified as a child node of the PCI +controller to which the wireless chip is connected. + +Optional properties: + +- mac-address: See ethernet.txt in the parent directory +- local-mac-address: See ethernet.txt in the parent directory +- ieee80211-freq-limit: See ieee80211.txt +- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data + +Optional nodes: +- led: Properties for a connected LED + Optional properties: + - led-sources: See Documentation/devicetree/bindings/leds/common.txt + +&pcie { + pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5000000 6000000>; + mediatek,mtd-eeprom = <&factory 0x8000>; + + led { + led-sources = <2>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 74d7f0af209c..3d2a031217da 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -41,6 +41,9 @@ Optional properties: - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. +- qcom,ath10k-calibration-variant: string to search for in the board-2.bin + variant list with the same bus and device + specific ids - qcom,ath10k-calibration-data : calibration data + board specific data as an array, the length can vary between hw versions. diff --git a/Documentation/devicetree/bindings/nios2/nios2.txt b/Documentation/devicetree/bindings/nios2/nios2.txt index d6d0a94cb3bb..b95e831bcba3 100644 --- a/Documentation/devicetree/bindings/nios2/nios2.txt +++ b/Documentation/devicetree/bindings/nios2/nios2.txt @@ -36,7 +36,7 @@ Optional properties: Example: -cpu@0x0 { +cpu@0 { device_type = "cpu"; compatible = "altr,nios2-1.0"; reg = <0>; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index ef06d061913c..d69543701d5d 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -5,6 +5,7 @@ Required properties: "allwinner,sun4i-a10-sid" "allwinner,sun7i-a20-sid" "allwinner,sun8i-h3-sid" + "allwinner,sun50i-a64-sid" - reg: Should contain registers location and length @@ -13,13 +14,13 @@ Are child nodes of qfprom, bindings of which as described in bindings/nvmem/nvmem.txt Example for sun4i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10> }; Example for sun7i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200> }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index fafd85bd67a6..e3298e18de26 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -1,4 +1,4 @@ -= Amlogic eFuse device tree bindings = += Amlogic Meson GX eFuse device tree bindings = Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt new file mode 100644 index 000000000000..a3c63954a1a4 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt @@ -0,0 +1,22 @@ +Amlogic Meson6/Meson8/Meson8b efuse + +Required Properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson6-efuse" + - "amlogic,meson8-efuse" + - "amlogic,meson8b-efuse" +- reg: base address and size of the efuse registers +- clocks: a reference to the efuse core gate clock +- clock-names: must be "core" + +All properties and sub-nodes as well as the consumer bindings +defined in nvmem.txt in this directory are also supported. + + +Example: + efuse: nvmem@0 { + compatible = "amlogic,meson8-efuse"; + reg = <0x0 0x2000>; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt index 6462e12d8de6..0415265c215a 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt @@ -10,7 +10,7 @@ Required Properties: Example: -otp: otp@0301c800 { +otp: otp@301c800 { compatible = "brcm,ocotp"; reg = <0x0301c800 0x2c>; brcm,ocotp-size = <2048>; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 70d791b03ea1..f162c72b4e36 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt index b52bc11e9597..fd06c09b822b 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.txt +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -33,7 +33,7 @@ bits: Is pair of bit location and number of bits, which specifies offset For example: /* Provider */ - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { ... /* Data cells */ diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt index 4ad68b7f5c18..26fe878d5c86 100644 --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -12,7 +12,7 @@ bindings/nvmem/nvmem.txt Example: - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { compatible = "qcom,qfprom"; reg = <0x00700000 0x8000>; ... diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 1ff02afdc55a..265bdb7dc8aa 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -6,11 +6,17 @@ Required properties: - "rockchip,rk3188-efuse" - for RK3188 SoCs. - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. + - "rockchip,rk3328-efuse" - for RK3328 SoCs. + - "rockchip,rk3368-efuse" - for RK3368 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size - clocks: Should be the clock id of eFuse - clock-names: Should be "pclk_efuse" +Optional properties: +- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse + size in property <reg> will be invalid if define this property. + Deprecated properties: - compatible: "rockchip,rockchip-efuse" Old efuse compatible value compatible to rk3066a, rk3188 and rk3288 diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt new file mode 100644 index 000000000000..20bc49b49799 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt @@ -0,0 +1,20 @@ +Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D +Secure Non-Volatile Storage. + +This DT node should be represented as a sub-node of a "syscon", +"simple-mfd" node. + +Required properties: +- compatible: should be one of the fallowing variants: + "fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S + "fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL + +Example: +snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt new file mode 100644 index 000000000000..eccf490d5a6d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt @@ -0,0 +1,49 @@ += UniPhier eFuse device tree bindings = + +This UniPhier eFuse must be under soc-glue. + +Required properties: +- compatible: should be "socionext,uniphier-efuse" +- reg: should contain the register location and length + += Data cells = +Are child nodes of efuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld20-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + usb_mon: usb-mon@54 { + reg = <0x54 0xc>; + }; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + usb { + ... + nvmem-cells = <&usb_mon>; + nvmem-cell-names = "usb_mon"; + } diff --git a/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt new file mode 100644 index 000000000000..4950c794ecbb --- /dev/null +++ b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt @@ -0,0 +1,39 @@ +OpenRISC Generic SoC +==================== + +Boards and FPGA SoC's which support the OpenRISC standard platform. The +platform essentially follows the conventions of the OpenRISC architecture +specification, however some aspects, such as the boot protocol have been defined +by the Linux port. + +Required properties +------------------- + - compatible: Must include "opencores,or1ksim" + +CPU nodes: +---------- +A "cpus" node is required. Required properties: + - #address-cells: Must be 1. + - #size-cells: Must be 0. +A CPU sub-node is also required for at least CPU 0. Since the topology may +be probed via CPS, it is not necessary to specify secondary CPUs. Required +properties: + - compatible: Must be "opencores,or1200-rtlsvn481". + - reg: CPU number. + - clock-frequency: The CPU clock frequency in Hz. +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "opencores,or1200-rtlsvn481"; + reg = <0>; + clock-frequency = <20000000>; + }; + }; + + +Boot protocol +------------- +The bootloader may pass the following arguments to the kernel: + - r3: address of a flattened device-tree blob or 0x0. diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 9d733af26be7..4e4f30288c8b 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -45,6 +45,11 @@ Devices supporting OPPs must set their "operating-points-v2" property with phandle to a OPP table in their DT node. The OPP core will use this phandle to find the operating points for the device. +This can contain more than one phandle for power domain providers that provide +multiple power domains. That is, one phandle for each power domain. If only one +phandle is available, then the same OPP table will be used for all power domains +provided by the power domain provider. + If required, this can be extended for SoC vendor specific bindings. Such bindings should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt and should have a compatible description like: "operating-points-v2-<vendor>". @@ -154,6 +159,14 @@ Optional properties: - status: Marks the node enabled/disabled. +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. / { diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt new file mode 100644 index 000000000000..832346e489a3 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt @@ -0,0 +1,63 @@ +Texas Instruments OMAP compatible OPP supply description + +OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which +contain data that can be used to adjust voltages programmed for some of their +supplies for more efficient operation. This binding provides the information +needed to read these values and use them to program the main regulator during +an OPP transitions. + +Also, some supplies may have an associated vbb-supply which is an Adaptive Body +Bias regulator which much be transitioned in a specific sequence with regards +to the vdd-supply and clk when making an OPP transition. By supplying two +regulators to the device that will undergo OPP transitions we can make use +of the multi regulator binding that is part of the OPP core described here [1] +to describe both regulators needed by the platform. + +[1] Documentation/devicetree/bindings/opp/opp.txt + +Required Properties for Device Node: +- vdd-supply: phandle to regulator controlling VDD supply +- vbb-supply: phandle to regulator controlling Body Bias supply + (Usually Adaptive Body Bias regulator) + +Required Properties for opp-supply node: +- compatible: Should be one of: + "ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB + "ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD + along with VBB + "ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD + but no VBB. +- reg: Address and length of the efuse register set for the device (mandatory + only for "ti,omap5-opp-supply") +- ti,efuse-settings: An array of u32 tuple items providing information about + optimized efuse configuration. Each item consists of the following: + volt: voltage in uV - reference voltage (OPP voltage) + efuse_offseet: efuse offset from reg where the optimized voltage is stored. +- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply. + +Example: + +/* Device Node (CPU) */ +cpus { + cpu0: cpu@0 { + device_type = "cpu"; + + ... + + vdd-supply = <&vcc>; + vbb-supply = <&abb_mpu>; + }; +}; + +/* OMAP OPP Supply with Class0 registers */ +opp_supply_mpu: opp_supply@4a003b20 { + compatible = "ti,omap5-opp-supply"; + reg = <0x4a003b20 0x8>; + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + >; + ti,absolute-max-voltage-uv = <1500000>; +}; diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt index 495880193adc..a1dc9366a8fc 100644 --- a/Documentation/devicetree/bindings/pci/altera-pcie.txt +++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -25,7 +25,7 @@ Optional properties: - bus-range: PCI bus numbers covered Example - pcie_0: pcie@0xc00000000 { + pcie_0: pcie@c00000000 { compatible = "altr,pcie-root-port-1.0"; reg = <0xc0000000 0x20000000>, <0xff220000 0x00004000>; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt index 4e4aee4439ea..979dc7b6cfe8 100644 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt @@ -4,7 +4,10 @@ This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: -- compatible: "axis,artpec6-pcie", "snps,dw-pcie" +- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode; + "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode; + "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode; + "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode; - reg: base addresses and lengths of the PCIe controller (DBI), the PHY controller, and configuration address space. - reg-names: Must include the following entries: diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt new file mode 100644 index 000000000000..9a305237fa6e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt @@ -0,0 +1,22 @@ +* Cadence PCIe endpoint controller + +Required properties: +- compatible: Should contain "cdns,cdns-pcie-ep" to identify the IP used. +- reg: Should contain the controller register base address and AXI interface + region base address respectively. +- reg-names: Must be "reg" and "mem" respectively. +- cdns,max-outbound-regions: Set to maximum number of outbound regions + +Optional properties: +- max-functions: Maximum number of functions that can be configured (default 1). + +Example: + +pcie@fc000000 { + compatible = "cdns,cdns-pcie-ep"; + reg = <0x0 0xfc000000 0x0 0x01000000>, + <0x0 0x80000000 0x0 0x40000000>; + reg-names = "reg", "mem"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <8>; +}; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt new file mode 100644 index 000000000000..20a33f38f69d --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt @@ -0,0 +1,60 @@ +* Cadence PCIe host controller + +This PCIe controller inherits the base properties defined in +host-generic-pci.txt. + +Required properties: +- compatible: Should contain "cdns,cdns-pcie-host" to identify the IP used. +- reg: Should contain the controller register base address, PCIe configuration + window base address, and AXI interface region base address respectively. +- reg-names: Must be "reg", "cfg" and "mem" respectively. +- #address-cells: Set to <3> +- #size-cells: Set to <2> +- device_type: Set to "pci" +- ranges: Ranges for the PCI memory and I/O regions +- #interrupt-cells: Set to <1> +- interrupt-map-mask and interrupt-map: Standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers. + +Optional properties: +- cdns,max-outbound-regions: Set to maximum number of outbound regions + (default 32) +- cdns,no-bar-match-nbits: Set into the no BAR match register to configure the + number of least significant bits kept during inbound (PCIe -> AXI) address + translations (default 32) +- vendor-id: The PCI vendor ID (16 bits, default is design dependent) +- device-id: The PCI device ID (16 bits, default is design dependent) + +Example: + +pcie@fb000000 { + compatible = "cdns,cdns-pcie-host"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + linux,pci-domain = <0>; + cdns,max-outbound-regions = <16>; + cdns,no-bar-match-nbits = <32>; + vendor-id = /bits/ 16 <0x17cd>; + device-id = /bits/ 16 <0x0200>; + + reg = <0x0 0xfb000000 0x0 0x01000000>, + <0x0 0x41000000 0x0 0x00001000>, + <0x0 0x40000000 0x0 0x04000000>; + reg-names = "reg", "cfg", "mem"; + + ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>, + <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>; + + #interrupt-cells = <0x1>; + + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>; + + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + + msi-parent = <&its_pci>; +}; diff --git a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt new file mode 100644 index 000000000000..515b2f9542e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt @@ -0,0 +1,42 @@ +* Synopsys DesignWare PCIe root complex in ECAM shift mode + +In some cases, firmware may already have configured the Synopsys DesignWare +PCIe controller in RC mode with static ATU window mappings that cover all +config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion. +In this case, there is no need for the OS to perform any low level setup +of clocks, PHYs or device registers, nor is there any reason for the driver +to reconfigure ATU windows for config and/or IO space accesses at runtime. + +In cases where the IP was synthesized with a minimum ATU window size of +64 KB, it cannot be supported by the generic ECAM driver, because it +requires special config space accessors that filter accesses to device #1 +and beyond on the first bus. + +Required properties: +- compatible: "marvell,armada8k-pcie-ecam" or + "socionext,synquacer-pcie-ecam" or + "snps,dw-pcie-ecam" (must be preceded by a more specific match) + +Please refer to the binding document of "pci-host-ecam-generic" in the +file host-generic-pci.txt for a description of the remaining required +and optional properties. + +Example: + + pcie1: pcie@7f000000 { + compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; + device_type = "pci"; + reg = <0x0 0x7f000000 0x0 0xf00000>; + bus-range = <0x0 0xe>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>, + <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>, + <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>; + msi-map = <0x0 &its 0x0 0x10000>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 7b1e48bf172b..cb33421184a0 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -41,6 +41,7 @@ Optional properties: Additional required properties for imx6sx-pcie: - clock names: Must include the following additional entries: - "pcie_inbound_axi" +- power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain Additional required properties for imx7d-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain @@ -52,7 +53,7 @@ Additional required properties for imx7d-pcie: Example: - pcie@0x01000000 { + pcie@01000000 { compatible = "fsl,imx6q-pcie", "snps,dw-pcie"; reg = <0x01ffc000 0x04000>, <0x01f00000 0x80000>; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt new file mode 100644 index 000000000000..c84bc027930b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -0,0 +1,68 @@ +HiSilicon STB PCIe host bridge DT description + +The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. +It shares common functions with the DesignWare PCIe core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Additional properties are described here: + +Required properties +- compatible: Should be one of the following strings: + "hisilicon,hi3798cv200-pcie" +- reg: Should contain sysctl, rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "control": control registers of PCIe controller; + "rc-dbi": configuration space of PCIe controller; + "config": configuration transaction space of PCIe controller. +- bus-range: PCI bus numbers covered. +- interrupts: MSI interrupt. +- interrupt-names: Must include "msi" entries. +- clocks: List of phandle and clock specifier pairs as listed in clock-names + property. +- clock-name: Must include the following entries: + "aux": auxiliary gate clock; + "pipe": pipe gate clock; + "sys": sys gate clock; + "bus": bus gate clock. +- resets: List of phandle and reset specifier pairs as listed in reset-names + property. +- reset-names: Must include the following entries: + "soft": soft reset; + "sys": sys reset; + "bus": bus reset. + +Optional properties: +- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- phys: List of phandle and phy mode specifier, should be 0. +- phy-names: Must be "phy". + +Example: + pcie@f9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0xf9860000 0x1000>, + <0xf0000000 0x2000>, + <0xf2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000 + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg PCIE_AUX_CLK>, + <&crg PCIE_PIPE_CLK>, + <&crg PCIE_SYS_CLK>, + <&crg PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index bdb7ab39d2d7..7bf9df047a1e 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -21,7 +21,7 @@ Optional properties: - dma-coherent: Present if DMA operations are coherent. Hip05 Example (note that Hip06 is the same except compatible): - pcie@0xb0080000 { + pcie@b0080000 { compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; reg-names = "rc_dbi", "config"; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index c0484da0f20d..66df1e81e0b8 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -18,6 +18,7 @@ Required properties: "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" + "fsl,ls1012a-pcie" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 982a74ea6df9..145a4f04194f 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -1,10 +1,15 @@ NVIDIA Tegra PCIe controller Required properties: -- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30, - "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie". - Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where - <chip> is tegra132 or tegra210. +- compatible: Must be: + - "nvidia,tegra20-pcie": for Tegra20 + - "nvidia,tegra30-pcie": for Tegra30 + - "nvidia,tegra124-pcie": for Tegra124 and Tegra132 + - "nvidia,tegra210-pcie": for Tegra210 + - "nvidia,tegra186-pcie": for Tegra186 +- power-domains: To ungate power partition by BPMP powergate driver. Must + contain BPMP phandle and PCIe power partition ID. This is required only + for Tegra186. - device_type: Must be "pci" - reg: A list of physical base address and length for each set of controller registers. Must contain an entry for each entry in the reg-names property. @@ -124,6 +129,16 @@ Power supplies for Tegra210: - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must supply 1.8 V. +Power supplies for Tegra186: +- Required: + - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 1.8 V. + - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must + supply 1.8 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties: @@ -255,7 +270,7 @@ Tegra30: SoC DTSI: - pcie-controller@00003000 { + pcie-controller@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -334,7 +349,7 @@ SoC DTSI: Board DTS: - pcie-controller@00003000 { + pcie-controller@3000 { status = "okay"; avdd-pexa-supply = <&ldo1_reg>; @@ -360,7 +375,7 @@ Tegra124: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -425,7 +440,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; @@ -456,7 +471,7 @@ Tegra210: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -521,7 +536,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avdd-pll-uerefe-supply = <&avdd_1v05_pll>; @@ -546,3 +561,114 @@ Board DTS: status = "okay"; }; }; + +Tegra186: +--------- + +SoC DTSI: + + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <0>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 3d038638612b..9fe7e12a7bf3 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -60,17 +60,15 @@ Example SoC configuration: 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; - pci@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; - pci@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; }; diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt index 34a11bfbfb60..651d957d1051 100644 --- a/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt +++ b/Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt @@ -6,9 +6,6 @@ and thus inherits all the common properties defined in designware-pcie.txt. Required properties: - compatible: "samsung,exynos5440-pcie" - reg: base addresses and lengths of the PCIe controller, - the PHY controller, additional register for the PHY controller. - (Registers for the PHY controller are DEPRECATED. - Use the PHY framework.) - reg-names : First name should be set to "elbi". And use the "config" instead of getting the configuration address space from "ranges". @@ -23,49 +20,8 @@ For other common properties, refer to Example: -SoC-specific DT Entry: +SoC-specific DT Entry (with using PHY framework): - pcie@290000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x290000 0x1000 - 0x270000 0x1000 - 0x271000 0x40>; - interrupts = <0 20 0>, <0 21 0>, <0 22 0>; - clocks = <&clock 28>, <&clock 27>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000 /* configuration space */ - 0x81000000 0 0 0x40001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */ - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <4>; - }; - - pcie@2a0000 { - compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; - reg = <0x2a0000 0x1000 - 0x272000 0x1000 - 0x271040 0x40>; - interrupts = <0 23 0>, <0 24 0>, <0 25 0>; - clocks = <&clock 29>, <&clock 27>; - clock-names = "pcie", "pcie_bus"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000 /* configuration space */ - 0x81000000 0 0 0x60001000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */ - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <4>; - }; - -With using PHY framework: pcie_phy0: pcie-phy@270000 { ... reg = <0x270000 0x1000>, <0x271000 0x40>; @@ -74,13 +30,21 @@ With using PHY framework: }; pcie@290000 { - ... + compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; reg = <0x290000 0x1000>, <0x40000000 0x1000>; reg-names = "elbi", "config"; + clocks = <&clock 28>, <&clock 27>; + clock-names = "pcie", "pcie_bus"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; phys = <&pcie_phy0>; ranges = <0x81000000 0 0 0x60001000 0 0x00010000 0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; - ... + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <4>; }; Board-specific DT Entry: diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt index 30b364e504ba..11063293f761 100644 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) -Integrator-specific notes: +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain two register areas: + first the base address of the V3 host bridge controller, 64KB + second the configuration area register space, 16MB +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. +- bus-range: see pci.txt +- ranges: this follows the standard PCI bindings in the IEEE Std + 1275-1994 (see pci.txt) with the following restriction: + - The non-prefetchable and prefetchable memory windows must + each be exactly 256MB (0x10000000) in size. + - The prefetchable memory window must be immediately adjacent + to the non-prefetcable memory window +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked + as pre-fetchable. Two ranges are supported by the hardware. -- syscon: should contain a link to the syscon device node (since +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since on the Integrator, some registers in the syscon are required to - operate the V3). + operate the V3 host bridge. -V360 EPC specific notes: +Example: -- reg: should contain the base address of the V3 adapter. -- interrupts: should contain a reference to the V3 error interrupt - as routed on the system. +pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt new file mode 100644 index 000000000000..24a0d06acd1d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -0,0 +1,43 @@ +Broadcom STB USB PHY + +Required properties: + - compatible: brcm,brcmstb-usb-phy + - reg: two offset and length pairs. + The first pair specifies a manditory set of memory mapped + registers used for general control of the PHY. + The second pair specifies optional registers used by some of + the SoCs that support USB 3.x + - #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + +Optional Properties: +- clocks : clock phandles. +- clock-names: String, clock name. +- brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) +- brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. +- dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. + +Example: + +usbphy_0: usb-phy@f0470200 { + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + compatible = "brcm,brcmstb-usb-phy"; + #phy-cells = <1>; + dr_mode = "host" + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt index 761c4bc24a9b..10efff28b52b 100644 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -15,7 +15,7 @@ Required properties For the child node: - #phy-cells: must be 0 Example: - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index 97977cd29a98..0aced97d8092 100644 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -27,7 +27,16 @@ Sub-nodes optional properties: This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". -Example: +- brcm,rxaeq-mode: string that indicates the desired RX equalizer + mode, possible values are: + "off" (equivalent to not specifying the property) + "auto" + "manual" (brcm,rxaeq-value is used in that case) + +- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX + equalizer value that should be used. Allowed range is 0..63. + +Example sata-phy@f0458100 { compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 1d25b04cd05e..6ac98b3b5f57 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -23,7 +23,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@020c9000 { +usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 91da947ae9b6..eeb9e1874ea6 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -4,10 +4,13 @@ This file provides information on what the device node for the R-Car generation 2 USB PHY contains. Required properties: -- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. +- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. + "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. + "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or + RZ/G1 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index ace9cce2704a..99b651b33110 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -8,6 +8,8 @@ Required properties: SoC. "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 SoC. + "renesas,usb2-phy-r8a77995" if the device is a part of an + R8A77995 SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index cbc7847dbf6c..c1ce5a0a652e 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -45,7 +45,7 @@ Optional properties: - usb3_vbus-supply : regulator phandle for controller usb3 vbus Example: - usbphy: phy@0x01c13400 { + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; /* phy base regs, phy1 pmu reg, phy2 pmu reg */ diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index f9853156e311..64f7109aea1f 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available. The driver will only use those matching the phy_type. Example: - usbphy1: phy@00a01800 { + usbphy1: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index cd13e6157088..57dfda8a7a1d 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -120,7 +120,7 @@ usb3phy@4a084400 { "refclk"; }; -sata_phy: phy@4A096000 { +sata_phy: phy@4a096000 { compatible = "ti,phy-pipe3-sata"; reg = <0x4A096000 0x80>, /* phy_rx */ <0x4A096400 0x64>, /* phy_tx */ diff --git a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt index 2c11866221c2..c591b9cb5ba0 100644 --- a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt +++ b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt @@ -49,7 +49,7 @@ explained in Documentation/devicetree/bindings/gpio/gpio.txt. Example ------- -iomux: iomux@FF10601c { +iomux: iomux@ff10601c { compatible = "abilis,tb10x-iomux"; reg = <0xFF10601c 0x4>; pctl_gpio_a: pctl-gpio-a { @@ -59,7 +59,7 @@ iomux: iomux@FF10601c { abilis,function = "uart0"; }; }; -uart@FF100000 { +uart@ff100000 { compatible = "snps,dw-apb-uart"; reg = <0xFF100000 0x100>; clock-frequency = <166666666>; @@ -69,7 +69,7 @@ uart@FF100000 { pinctrl-names = "default"; pinctrl-0 = <&pctl_uart0>; }; -gpioa: gpio@FF140000 { +gpioa: gpio@ff140000 { compatible = "abilis,tb10x-gpio"; reg = <0xFF140000 0x1000>; gpio-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 6f2ec9af0de2..09789fdfa749 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -89,7 +89,7 @@ Optional subnode-properties: Examples: -pio: pinctrl@01c20800 { +pio: pinctrl@1c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt index 3600d5c6c4d7..3914529a3214 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt @@ -25,7 +25,7 @@ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt For example: - pinmux: pinmux@0x0301d0c8 { + pinmux: pinmux@0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x1b0>; diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt index 61466c58faae..4346ff2dd8e6 100644 --- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt @@ -9,8 +9,17 @@ The pin controller node must be a subnode of the system controller node. Required properties: - compatible: "cortina,gemini-pinctrl" -Subnodes of the pin controller contain pin control multiplexing set-up. -Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes. +Subnodes of the pin controller contain pin control multiplexing set-up +and pin configuration of individual pins. + +Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes +and generic pin config nodes. + +Supported configurations: +- skew-delay is supported on the Ethernet pins +- drive-strength with 4, 8, 12 or 16 mA as argument is supported for + entire groups on the groups "idegrp", "gmii_gmac0_grp", "gmii_gmac1_grp" + and "pcigrp". Example: diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 42d74f8a1bcc..a1050b5982ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -58,14 +58,14 @@ Some requirements for using fsl,imx-pinctrl binding: configurations by referring to the phandle of that pin configuration node. Examples: -usdhc@0219c000 { /* uSDHC4 */ +usdhc@219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; -iomuxc@020e0000 { +iomuxc@20e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt index a81bbf37ed66..7ca4f6118d9a 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt @@ -4,7 +4,8 @@ Please refer to fsl,imx-pinctrl.txt in this directory for common binding part and usage. Required properties: -- compatible: "fsl,imx6ul-iomuxc" +- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or + "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller. - fsl,pins: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can be found in diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt index 0326154c7925..a72dc3178179 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt @@ -152,7 +152,7 @@ resetn Example: -------- -pinctrl@18101C00 { +pinctrl@18101c00 { compatible = "img,pistachio-system-pinctrl"; reg = <0x18101C00 0x400>; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt index 51b943cc9770..cf9ccdff4455 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -89,7 +89,7 @@ Valid values for pin and group names are: Example: - pinctrl_pdc: pinctrl@02006500 { + pinctrl_pdc: pinctrl@2006500 { #gpio-range-cells = <3>; compatible = "img,tz1090-pdc-pinctrl"; reg = <0x02006500 0x100>; @@ -121,7 +121,7 @@ Example board file extracts: }; }; - ir: ir@02006200 { + ir: ir@2006200 { pinctrl-names = "default"; pinctrl-0 = <&irmod_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 509faa87ad0e..2dfd9a3fc1e4 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -197,7 +197,7 @@ Valid values for pin and group names are: Example: - pinctrl: pinctrl@02005800 { + pinctrl: pinctrl@2005800 { #gpio-range-cells = <3>; compatible = "img,tz1090-pinctrl"; reg = <0x02005800 0xe4>; @@ -221,7 +221,7 @@ Example board file extract: }; }; - uart@02004b00 { + uart@2004b00 { pinctrl-names = "default"; pinctrl-0 = <&uart0_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt index 8e5216bcd748..4658f105fa09 100644 --- a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt @@ -163,7 +163,7 @@ Valid values for xRX300 pin names: io42-io43,io48-io61. Example: - gpio: pinmux@E100B10 { + gpio: pinmux@e100b10 { compatible = "lantiq,danube-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index f64060908d5a..c7c088d2dd50 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -97,8 +97,8 @@ group spi_quad - pins 15-16 - functions spi, gpio -group uart_2 - - pins 9-10 +group uart2 + - pins 9-10 and 18-19 - functions uart, gpio Available groups and functions for the South bridge: diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt index 2392557ede27..2c12f9789116 100644 --- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt @@ -9,6 +9,8 @@ Required properties for the root node: "amlogic,meson-gxbb-aobus-pinctrl" "amlogic,meson-gxl-periphs-pinctrl" "amlogic,meson-gxl-aobus-pinctrl" + "amlogic,meson-axg-periphs-pinctrl" + "amlogic,meson-axg-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt new file mode 100644 index 000000000000..24a210e0c59a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt @@ -0,0 +1,39 @@ +Microsemi Ocelot pin controller Device Tree Bindings +---------------------------------------------------- + +Required properties: + - compatible : Should be "mscc,ocelot-pinctrl" + - reg : Address and length of the register set for the device + - gpio-controller : Indicates this device is a GPIO controller + - #gpio-cells : Must be 2. + The first cell is the pin number and the + second cell specifies GPIO flags, as defined in + <dt-bindings/gpio/gpio.h>. + - gpio-ranges : Range of pins managed by the GPIO controller. + + +The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin +configuration documented in pinctrl-bindings.txt. + +The following generic properties are supported: + - function + - pins + +Example: + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + reg = <0x71070034 0x28>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + + uart_pins: uart-pins { + pins = "GPIO_6", "GPIO_7"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_12", "GPIO_13"; + function = "uart2"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 4048f43a9d29..02e971c39d81 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -97,7 +97,7 @@ SoC file extract: Board file extract: ------------------- - pcie-controller@01003000 { + pcie-controller@1003000 { ... phys = <&padctl 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt index eecf028ff485..bf9b07016c87 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt @@ -96,14 +96,14 @@ For example, pinctrl might have subnodes like the following: For a specific board, if it wants to use sd1, it can add the following to its board-specific .dts file. -sd1: sd@0x12340000 { +sd1: sd@12340000 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pmx0>; } or -sd1: sd@0x12340000 { +sd1: sd@12340000 { pinctrl-names = "default"; pinctrl-0 = <&sd1_pmx1>; } diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 4483cc31e531..ad9bbbba36e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -271,6 +271,10 @@ output-high - set the pin to output mode with high level sleep-hardware-state - indicate this is sleep related state which will be programmed into the registers for the sleep state. slew-rate - set the slew rate +skew-delay - this affects the expected clock skew on input pins + and the delay before latching a value to an output + pin. Typically indicates how many double-inverters are + used to delay the signal. For example: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index c934106b10aa..9c451c20dda4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -13,6 +13,7 @@ Required properties: - "microchip,mcp23s18" for 16 GPIO SPI version - "microchip,mcp23008" for 8 GPIO I2C version or - "microchip,mcp23017" for 16 GPIO I2C version of the chip + - "microchip,mcp23018" for 16 GPIO I2C version NOTE: Do not use the old mcp prefix any more. It is deprecated and will be removed. - #gpio-cells : Should be two. @@ -81,3 +82,61 @@ gpiom1: gpio@0 { reg = <0>; spi-max-frequency = <1000000>; }; + +Pull-up configuration +===================== + +If pins are used as output, they can also be configured with pull-ups. This is +done with pinctrl. + +Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + <pinctrl-binding.txt>. + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- pins: List of pins. Valid values of pins properties are: + gpio0 ... gpio7 for the devices with 8 GPIO pins and + gpio0 ... gpio15 for the devices with 16 GPIO pins. + +Optional properties: +------------------- +The following optional property is defined in the pinmux DT binding document +<pinctrl-bindings.txt>. Absence of this property will leave the configuration +in its default state. + bias-pull-up + +Example with pinctrl to pull-up output pins: +gpio21: gpio@21 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <0x2>; + reg = <0x21>; + interrupt-parent = <&socgpio>; + interrupts = <0x17 0x8>; + interrupt-names = "mcp23017@21 irq"; + interrupt-controller; + #interrupt-cells = <0x2>; + microchip,irq-mirror; + pinctrl-names = "default"; + pinctrl-0 = <&i2cgpio0irq &gpio21pullups>; + + gpio21pullups: pinmux { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + bias-pull-up; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 37d744750579..afa8a18ea11a 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -81,12 +81,12 @@ Examples: reg = <0 0x10005000 0 0x1000>; }; - syscfg_pctl_b: syscfg_pctl_b@1020C020 { + syscfg_pctl_b: syscfg_pctl_b@1020c020 { compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; reg = <0 0x1020C020 0 0x1000>; }; - pinctrl@01c20800 { + pinctrl@1c20800 { compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt new file mode 100644 index 000000000000..f18ed99f6e14 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt @@ -0,0 +1,351 @@ +== MediaTek MT7622 pinctrl controller == + +Required properties for the root node: + - compatible: Should be one of the following + "mediatek,mt7622-pinctrl" for MT7622 SoC + - reg: offset and length of the pinctrl space + + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be two. The first cell is the pin number and the + second is the GPIO flags. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +MT7622 pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, slew rate, etc. + +We support 2 types of configuration nodes. Those nodes can be either pinmux +nodes or pinconf nodes. Each configuration node can consist of multiple nodes +describing the pinmux and pinconf options. + +The name of each subnode doesn't matter as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +== pinmux nodes content == + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pinmux subnode: + +Required properties are: + - groups: An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. + - function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +== pinconf nodes content == + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pinconf subnode: + +Required properties are: + - pins: An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + - groups: An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. + +Optional properies are: + bias-disable, bias-pull, bias-pull-down, input-enable, + input-schmitt-enable, input-schmitt-disable, output-enable + output-low, output-high, drive-strength, slew-rate + + Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for + slower slew rate respectively. + Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA. + +The following specific properties as defined are valid to specify in a pinconf +subnode: + +Optional properties are: + - mediatek,tdsel: An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments are from 0 + to 15. + - mediatek,rdsel: An integer describing the steps for input level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments are from 0 + to 63. + +== Valid values for pins, function and groups on MT7622 == + +Valid values for pins are: +pins can be referenced via the pin names as the below table shown and the +related physical number is also put ahead of those names which helps cross +references to pins between groups to know whether pins assignment conflict +happens among devices try to acquire those available pins. + + Pin #: Valid values for pins + ----------------------------- + PIN 0: "GPIO_A" + PIN 1: "I2S1_IN" + PIN 2: "I2S1_OUT" + PIN 3: "I2S_BCLK" + PIN 4: "I2S_WS" + PIN 5: "I2S_MCLK" + PIN 6: "TXD0" + PIN 7: "RXD0" + PIN 8: "SPI_WP" + PIN 9: "SPI_HOLD" + PIN 10: "SPI_CLK" + PIN 11: "SPI_MOSI" + PIN 12: "SPI_MISO" + PIN 13: "SPI_CS" + PIN 14: "I2C_SDA" + PIN 15: "I2C_SCL" + PIN 16: "I2S2_IN" + PIN 17: "I2S3_IN" + PIN 18: "I2S4_IN" + PIN 19: "I2S2_OUT" + PIN 20: "I2S3_OUT" + PIN 21: "I2S4_OUT" + PIN 22: "GPIO_B" + PIN 23: "MDC" + PIN 24: "MDIO" + PIN 25: "G2_TXD0" + PIN 26: "G2_TXD1" + PIN 27: "G2_TXD2" + PIN 28: "G2_TXD3" + PIN 29: "G2_TXEN" + PIN 30: "G2_TXC" + PIN 31: "G2_RXD0" + PIN 32: "G2_RXD1" + PIN 33: "G2_RXD2" + PIN 34: "G2_RXD3" + PIN 35: "G2_RXDV" + PIN 36: "G2_RXC" + PIN 37: "NCEB" + PIN 38: "NWEB" + PIN 39: "NREB" + PIN 40: "NDL4" + PIN 41: "NDL5" + PIN 42: "NDL6" + PIN 43: "NDL7" + PIN 44: "NRB" + PIN 45: "NCLE" + PIN 46: "NALE" + PIN 47: "NDL0" + PIN 48: "NDL1" + PIN 49: "NDL2" + PIN 50: "NDL3" + PIN 51: "MDI_TP_P0" + PIN 52: "MDI_TN_P0" + PIN 53: "MDI_RP_P0" + PIN 54: "MDI_RN_P0" + PIN 55: "MDI_TP_P1" + PIN 56: "MDI_TN_P1" + PIN 57: "MDI_RP_P1" + PIN 58: "MDI_RN_P1" + PIN 59: "MDI_RP_P2" + PIN 60: "MDI_RN_P2" + PIN 61: "MDI_TP_P2" + PIN 62: "MDI_TN_P2" + PIN 63: "MDI_TP_P3" + PIN 64: "MDI_TN_P3" + PIN 65: "MDI_RP_P3" + PIN 66: "MDI_RN_P3" + PIN 67: "MDI_RP_P4" + PIN 68: "MDI_RN_P4" + PIN 69: "MDI_TP_P4" + PIN 70: "MDI_TN_P4" + PIN 71: "PMIC_SCL" + PIN 72: "PMIC_SDA" + PIN 73: "SPIC1_CLK" + PIN 74: "SPIC1_MOSI" + PIN 75: "SPIC1_MISO" + PIN 76: "SPIC1_CS" + PIN 77: "GPIO_D" + PIN 78: "WATCHDOG" + PIN 79: "RTS3_N" + PIN 80: "CTS3_N" + PIN 81: "TXD3" + PIN 82: "RXD3" + PIN 83: "PERST0_N" + PIN 84: "PERST1_N" + PIN 85: "WLED_N" + PIN 86: "EPHY_LED0_N" + PIN 87: "AUXIN0" + PIN 88: "AUXIN1" + PIN 89: "AUXIN2" + PIN 90: "AUXIN3" + PIN 91: "TXD4" + PIN 92: "RXD4" + PIN 93: "RTS4_N" + PIN 94: "CST4_N" + PIN 95: "PWM1" + PIN 96: "PWM2" + PIN 97: "PWM3" + PIN 98: "PWM4" + PIN 99: "PWM5" + PIN 100: "PWM6" + PIN 101: "PWM7" + PIN 102: "GPIO_E" + +Valid values for function are: + "emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie", + "pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog" + +Valid values for groups are: +additional data is put followingly with valid value allowing us to know which +applicable function and which relevant pins (in pin#) are able applied for that +group. + + Valid value function pins (in pin#) + ------------------------------------------------------------------------- + "emmc" "emmc" 40, 41, 42, 43, 44, 45, + 47, 48, 49, 50 + "emmc_rst" "emmc" 37 + "esw" "eth" 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, + 63, 64, 65, 66, 67, 68, + 69, 70 + "esw_p0_p1" "eth" 51, 52, 53, 54, 55, 56, + 57, 58 + "esw_p2_p3_p4" "eth" 59, 60, 61, 62, 63, 64, + 65, 66, 67, 68, 69, 70 + "rgmii_via_esw" "eth" 59, 60, 61, 62, 63, 64, + 65, 66, 67, 68, 69, 70 + "rgmii_via_gmac1" "eth" 59, 60, 61, 62, 63, 64, + 65, 66, 67, 68, 69, 70 + "rgmii_via_gmac2" "eth" 25, 26, 27, 28, 29, 30, + 31, 32, 33, 34, 35, 36 + "mdc_mdio" "eth" 23, 24 + "i2c0" "i2c" 14, 15 + "i2c1_0" "i2c" 55, 56 + "i2c1_1" "i2c" 73, 74 + "i2c1_2" "i2c" 87, 88 + "i2c2_0" "i2c" 57, 58 + "i2c2_1" "i2c" 75, 76 + "i2c2_2" "i2c" 89, 90 + "i2s_in_mclk_bclk_ws" "i2s" 3, 4, 5 + "i2s1_in_data" "i2s" 1 + "i2s2_in_data" "i2s" 16 + "i2s3_in_data" "i2s" 17 + "i2s4_in_data" "i2s" 18 + "i2s_out_mclk_bclk_ws" "i2s" 3, 4, 5 + "i2s1_out_data" "i2s" 2 + "i2s2_out_data" "i2s" 19 + "i2s3_out_data" "i2s" 20 + "i2s4_out_data" "i2s" 21 + "ir_0_tx" "ir" 16 + "ir_1_tx" "ir" 59 + "ir_2_tx" "ir" 99 + "ir_0_rx" "ir" 17 + "ir_1_rx" "ir" 60 + "ir_2_rx" "ir" 100 + "ephy_leds" "led" 86, 91, 92, 93, 94 + "ephy0_led" "led" 86 + "ephy1_led" "led" 91 + "ephy2_led" "led" 92 + "ephy3_led" "led" 93 + "ephy4_led" "led" 94 + "wled" "led" 85 + "par_nand" "flash" 37, 38, 39, 40, 41, 42, + 43, 44, 45, 46, 47, 48, + 49, 50 + "snfi" "flash" 8, 9, 10, 11, 12, 13 + "spi_nor" "flash" 8, 9, 10, 11, 12, 13 + "pcie0_0_waken" "pcie" 14 + "pcie0_1_waken" "pcie" 79 + "pcie1_0_waken" "pcie" 14 + "pcie0_0_clkreq" "pcie" 15 + "pcie0_1_clkreq" "pcie" 80 + "pcie1_0_clkreq" "pcie" 15 + "pcie0_pad_perst" "pcie" 83 + "pcie1_pad_perst" "pcie" 84 + "pmic_bus" "pmic" 71, 72 + "pwm_ch1_0" "pwm" 51 + "pwm_ch1_1" "pwm" 73 + "pwm_ch1_2" "pwm" 95 + "pwm_ch2_0" "pwm" 52 + "pwm_ch2_1" "pwm" 74 + "pwm_ch2_2" "pwm" 96 + "pwm_ch3_0" "pwm" 53 + "pwm_ch3_1" "pwm" 75 + "pwm_ch3_2" "pwm" 97 + "pwm_ch4_0" "pwm" 54 + "pwm_ch4_1" "pwm" 67 + "pwm_ch4_2" "pwm" 76 + "pwm_ch4_3" "pwm" 98 + "pwm_ch5_0" "pwm" 68 + "pwm_ch5_1" "pwm" 77 + "pwm_ch5_2" "pwm" 99 + "pwm_ch6_0" "pwm" 69 + "pwm_ch6_1" "pwm" 78 + "pwm_ch6_2" "pwm" 81 + "pwm_ch6_3" "pwm" 100 + "pwm_ch7_0" "pwm" 70 + "pwm_ch7_1" "pwm" 82 + "pwm_ch7_2" "pwm" 101 + "sd_0" "sd" 16, 17, 18, 19, 20, 21 + "sd_1" "sd" 25, 26, 27, 28, 29, 30 + "spic0_0" "spi" 63, 64, 65, 66 + "spic0_1" "spi" 79, 80, 81, 82 + "spic1_0" "spi" 67, 68, 69, 70 + "spic1_1" "spi" 73, 74, 75, 76 + "spic2_0_wp_hold" "spi" 8, 9 + "spic2_0" "spi" 10, 11, 12, 13 + "tdm_0_out_mclk_bclk_ws" "tdm" 8, 9, 10 + "tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13 + "tdm_0_out_data" "tdm" 20 + "tdm_0_in_data" "tdm" 21 + "tdm_1_out_mclk_bclk_ws" "tdm" 57, 58, 59 + "tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62 + "tdm_1_out_data" "tdm" 55 + "tdm_1_in_data" "tdm" 56 + "uart0_0_tx_rx" "uart" 6, 7 + "uart1_0_tx_rx" "uart" 55, 56 + "uart1_0_rts_cts" "uart" 57, 58 + "uart1_1_tx_rx" "uart" 73, 74 + "uart1_1_rts_cts" "uart" 75, 76 + "uart2_0_tx_rx" "uart" 3, 4 + "uart2_0_rts_cts" "uart" 1, 2 + "uart2_1_tx_rx" "uart" 51, 52 + "uart2_1_rts_cts" "uart" 53, 54 + "uart2_2_tx_rx" "uart" 59, 60 + "uart2_2_rts_cts" "uart" 61, 62 + "uart2_3_tx_rx" "uart" 95, 96 + "uart3_0_tx_rx" "uart" 57, 58 + "uart3_1_tx_rx" "uart" 81, 82 + "uart3_1_rts_cts" "uart" 79, 80 + "uart4_0_tx_rx" "uart" 61, 62 + "uart4_1_tx_rx" "uart" 91, 92 + "uart4_1_rts_cts" "uart" 93, 94 + "uart4_2_tx_rx" "uart" 97, 98 + "uart4_2_rts_cts" "uart" 95, 96 + "watchdog" "watchdog" 78 + +Example: + + pio: pinctrl@10211000 { + compatible = "mediatek,mt7622-pinctrl"; + reg = <0 0x10211000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + + pinctrl_eth_default: eth-default { + mux-mdio { + groups = "mdc_mdio"; + function = "eth"; + drive-strength = <12>; + }; + + mux-gmac2 { + groups = "gmac2"; + function = "eth"; + drive-strength = <12>; + }; + + mux-esw { + groups = "esw"; + function = "eth"; + drive-strength = <8>; + }; + + conf-mdio { + pins = "MDC"; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt index 5f55be59d914..f8420520e14b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt @@ -41,7 +41,7 @@ For example, pinctrl might have subnodes like the following: For a specific board, if it wants to use uart2 without hardware flow control, it can add the following to its board-specific .dts file. -uart2: uart@0xb0070000 { +uart2: uart@b0070000 { pinctrl-names = "default"; pinctrl-0 = <&uart2_noflow_pins_a>; } diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt index 013c675b5b64..48b9be48af18 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt @@ -89,7 +89,7 @@ Example: interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt index e312a71b2f94..aaf01e929eea 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -175,7 +175,7 @@ to specify in a pin configuration subnode: Example: - tlmm: pinctrl@01010000 { + tlmm: pinctrl@1010000 { compatible = "qcom,msm8996-pinctrl"; reg = <0x01010000 0x300000>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt new file mode 100644 index 000000000000..e70c79bbbc5b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt @@ -0,0 +1,193 @@ +Qualcomm MSM8998 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8998 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,msm8998-pinctrl" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio149 + Supports mux, bias and drive-strength + + sdc2_clk, sdc2_cmd, sdc2_data + Supports bias and drive-strength + + ufs_reset + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, + atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, + audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, + blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a, + blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2, + blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, + blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, + blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b, + blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b, + blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a, + blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a, + blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a, + blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a, + blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset, + btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd, + gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a, + gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, + isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, + m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, + nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, + pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, + qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, + qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, + spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1, + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en, + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0, + vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@03400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <0 208 0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart_console_active { + mux { + pins = "gpio4", "gpio5"; + function = "blsp_uart8_a"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 5b12c57e7f02..5c25fcb29fb5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -15,6 +15,7 @@ PMIC's from Qualcomm. "qcom,pm8921-gpio" "qcom,pm8941-gpio" "qcom,pm8994-gpio" + "qcom,pmi8994-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" @@ -85,6 +86,7 @@ to specify in a pin configuration subnode: gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 + gpio1-gpio10 for pmi8994 gpio1-gpio22 for pma8084 gpio1-gpio10 for pmi8994 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 9b4f8041c36a..bb1790e0b176 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -24,6 +24,7 @@ Required Properties: - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller. - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller. - "renesas,pfc-r8a7796": for R8A7796 (R-Car M3-W) compatible pin-controller. + - "renesas,pfc-r8a77970": for R8A77970 (R-Car V3M) compatible pin-controller. - "renesas,pfc-r8a77995": for R8A77995 (R-Car D3) compatible pin-controller. - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt index 43e21474528a..fd3696eb36bf 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt @@ -12,8 +12,10 @@ Pin controller node ------------------- Required properties: - - compatible - this shall be "renesas,r7s72100-ports". + - compatible: should be: + - "renesas,r7s72100-ports": for RZ/A1H + - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M + - "renesas,r7s72102-ports": for RZ/A1L - reg address base and length of the memory area where the pin controller diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 4864e3a74de3..a01a3b8a2363 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -136,7 +136,7 @@ Example for rk3188: #size-cells = <1>; ranges; - gpio0: gpio0@0x2000a000 { + gpio0: gpio0@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -149,7 +149,7 @@ Example for rk3188: #interrupt-cells = <2>; }; - gpio1: gpio1@0x2003c000 { + gpio1: gpio1@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt new file mode 100644 index 000000000000..8173b12138ad --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.txt @@ -0,0 +1,27 @@ +UniPhier SoCs pin controller + +Required properties: +- compatible: should be one of the following: + "socionext,uniphier-ld4-pinctrl" - for LD4 SoC + "socionext,uniphier-pro4-pinctrl" - for Pro4 SoC + "socionext,uniphier-sld8-pinctrl" - for sLD8 SoC + "socionext,uniphier-pro5-pinctrl" - for Pro5 SoC + "socionext,uniphier-pxs2-pinctrl" - for PXs2 SoC + "socionext,uniphier-ld6b-pinctrl" - for LD6b SoC + "socionext,uniphier-ld11-pinctrl" - for LD11 SoC + "socionext,uniphier-ld20-pinctrl" - for LD20 SoC + "socionext,uniphier-pxs3-pinctrl" - for PXs3 SoC + +Note: +The UniPhier pinctrl should be a subnode of a "syscon" compatible node. + +Example: + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 33e3d3c47552..2c46f30b62c5 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -12,6 +12,8 @@ Required properies: "st,stm32f469-pinctrl" "st,stm32f746-pinctrl" "st,stm32h743-pinctrl" + "st,stm32mp157-pinctrl" + "st,stm32mp157-z-pinctrl" - #address-cells: The value of this property must be 1 - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to @@ -143,6 +145,24 @@ Required properties: * 16 : Alternate Function 15 * 17 : Analog + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = <STM32_PINMUX('A', 9, AF2)>; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = <STM32_PINMUX('A', 9, GPIO)>; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; + }; + Optional properties: - GENERIC_PINCONFIG: is the generic pinconfig options to use. Available options are: @@ -165,13 +185,13 @@ pin-controller { ... usart1_pins_a: usart1@0 { pins1 { - pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + pinmux = <STM32_PINMUX('A', 9, AF7)>; bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + pinmux = <STM32_PINMUX('A', 10, AF7)>; bias-disable; }; }; diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt index 007b9a7ae723..78edd63641e8 100644 --- a/Documentation/devicetree/bindings/power/actions,owl-sps.txt +++ b/Documentation/devicetree/bindings/power/actions,owl-sps.txt @@ -2,10 +2,12 @@ Actions Semi Owl Smart Power System (SPS) Required properties: - compatible : "actions,s500-sps" for S500 + "actions,s700-sps" for S700 - reg : Offset and length of the register set for the device. - #power-domain-cells : Must be 1. See macros in: include/dt-bindings/power/owl-s500-powergate.h for S500 + include/dt-bindings/power/owl-s700-powergate.h for S700 Example: diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt new file mode 100644 index 000000000000..1cd050b4054c --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -0,0 +1,61 @@ +Amlogic Meson Power Controller +============================== + +The Amlogic Meson SoCs embeds an internal Power domain controller. + +VPU Power Domain +---------------- + +The Video Processing Unit power domain is controlled by this power controller, +but the domain requires some external resources to meet the correct power +sequences. +The bindings must respect the power domain bindings as described in the file +power_domain.txt + +Device Tree Bindings: +--------------------- + +Required properties: +- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs +- #power-domain-cells: should be 0 +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node +- resets: phandles to the reset lines needed for this power demain sequence + as described in ../reset/reset.txt +- clocks: from common clock binding: handle to VPU and VAPB clocks +- clock-names: from common clock binding: must contain "vpu", "vapb" + corresponding to entry in the clocks property. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: +------- + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index 6c1498958d48..b31d6bbeee16 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -9,6 +9,7 @@ Required properties: - fsl,imx6q-gpc - fsl,imx6qp-gpc - fsl,imx6sl-gpc + - fsl,imx6sx-gpc - reg: should be register base and length as documented in the datasheet - interrupts: Should contain one interrupt specifier for the GPC interrupt @@ -29,6 +30,8 @@ Required properties: PU_DOMAIN 1 The following additional DOMAIN_INDEX value is valid for i.MX6SL: DISPLAY_DOMAIN 2 + The following additional DOMAIN_INDEX value is valid for i.MX6SX: + PCI_DOMAIN 3 - #power-domain-cells: Should be 0 @@ -40,7 +43,7 @@ Optional properties: Example: - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, @@ -80,7 +83,7 @@ that is a phandle pointing to the power domain the device belongs to. Example of a device that is part of the PU power domain: - vpu: vpu@02040000 { + vpu: vpu@2040000 { reg = <0x02040000 0x3c000>; /* ... */ power-domains = <&pd_pu>; diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt index 02f45c65fd87..9acce75b29ab 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.txt @@ -44,10 +44,10 @@ Example: #address-cells = <1>; #size-cells = <0>; - pgc_pcie_phy: power-domain@3 { + pgc_pcie_phy: power-domain@1 { #power-domain-cells = <0>; - reg = <IMX7_POWER_DOMAIN_PCIE_PHY>; + reg = <1>; power-supply = <®_1p0d>; }; }; diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt new file mode 100644 index 000000000000..c6b82511ae8a --- /dev/null +++ b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt @@ -0,0 +1,8 @@ +Binding for MIPS Cluster Power Controller (CPC). + +This binding allows a system to specify where the CPC registers are +located. + +Required properties: +compatible : Should be "mti,mips-cpc". +regs: Should describe the address & size of the CPC register region. diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 14bd9e945ff6..f3355313c020 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -40,6 +40,12 @@ Optional properties: domain's idle states. In the absence of this property, the domain would be considered as capable of being powered-on or powered-off. +- operating-points-v2 : Phandles to the OPP tables of power domains provided by + a power domain provider. If the provider provides a single power domain only + or all the power domains provided by the provider have identical OPP tables, + then this shall contain a single phandle. Refer to ../opp/opp.txt for more + information. + Example: power: power-controller@12340000 { @@ -120,4 +126,63 @@ The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". +Optional properties: +- required-opp: This contains phandle to an OPP node in another device's OPP + table. It may contain an array of phandles, where each phandle points to an + OPP of a different device. It should not contain multiple phandles to the OPP + nodes in the same OPP table. This specifies the minimum required OPP of the + device(s), whose OPP's phandle is present in this property, for the + functioning of the current device at the current OPP (where this property is + present). + +Example: +- OPP table for domain provider that provides two domains. + + domain0_opp_table: opp-table0 { + compatible = "operating-points-v2"; + + domain0_opp_0: opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000 970000 985000>; + }; + domain0_opp_1: opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1000000 980000 1010000>; + }; + }; + + domain1_opp_table: opp-table1 { + compatible = "operating-points-v2"; + + domain1_opp_0: opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <975000 970000 985000>; + }; + domain1_opp_1: opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1000000 980000 1010000>; + }; + }; + + power: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + operating-points-v2 = <&domain0_opp_table>, <&domain1_opp_table>; + }; + + leaky-device0@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 0>; + required-opp = <&domain0_opp_0>; + }; + + leaky-device1@12350000 { + compatible = "foo,i-leak-current"; + reg = <0x12350000 0x1000>; + power-domains = <&power 1>; + required-opp = <&domain1_opp_1>; + }; + [1]. Documentation/devicetree/bindings/power/domain-idle-state.txt diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt index af21502e939c..f747f95eee58 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback. Examples with soctypes are: - "renesas,r8a7743-apmu" (RZ/G1M) + - "renesas,r8a7745-apmu" (RZ/G1E) - "renesas,r8a7790-apmu" (R-Car H2) - "renesas,r8a7791-apmu" (R-Car M2-W) - "renesas,r8a7792-apmu" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index 98cc8c09d02d..8690f10426a3 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -17,6 +17,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77970-sysc" (R-Car V3M) - "renesas,r8a77995-sysc" (R-Car D3) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt deleted file mode 100644 index dc7c9bad63ea..000000000000 --- a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt +++ /dev/null @@ -1,23 +0,0 @@ -i.mx6 Poweroff Driver - -SNVS_LPCR in SNVS module can power off the whole system by pull -PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC. -If you don't want to use PMIC_ON_REQ as power on/off control, -please set status='disabled' to disable this driver. - -Required Properties: --compatible: "fsl,sec-v4.0-poweroff" --reg: Specifies the physical address of the SNVS_LPCR register - -Example: - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; - ..... - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; - }; - } diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt index c82f12e2d85c..c5c03789ed1e 100644 --- a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -37,12 +37,12 @@ Example 1: Setup keystone reset so that in case software reset or WDT0 is triggered it issues hard reset for SoC. -pllctrl: pll-controller@02310000 { +pllctrl: pll-controller@2310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; -devctrl: device-state-control@02620000 { +devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt index 6858e1a804ad..615c1cb6889f 100644 --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.txt +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.txt @@ -15,6 +15,7 @@ Required properties: * "ti,bq27520g2" - BQ27520-g2 * "ti,bq27520g3" - BQ27520-g3 * "ti,bq27520g4" - BQ27520-g4 + * "ti,bq27521" - BQ27521 * "ti,bq27530" - BQ27530 * "ti,bq27531" - BQ27531 * "ti,bq27541" - BQ27541 diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt new file mode 100644 index 000000000000..4b2195571a49 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt @@ -0,0 +1,66 @@ +Binding for sbs-manager + +Required properties: +- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. +- reg: integer, i2c address of the device. Should be <0xa>. +Optional properties: +- gpio-controller: Marks the port as GPIO controller. + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell + is used to specify optional parameters: + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. + +From OS view the device is basically an i2c-mux used to communicate with up to +four smart battery devices at address 0xb. The driver actually implements this +behaviour. So standard i2c-mux nodes can be used to register up to four slave +batteries. Channels will be numerated starting from 1 to 4. + +Example: + +batman@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 000000000000..21ef14d6af12 --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-mpu-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_mpu"; + }; diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 3c81f78b5c27..5d254ab13ebf 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -60,7 +60,7 @@ Examples #size-cells = <0>; button@1 { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <116>; label = "POWER"; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt index 641bc13983e1..ed6a414b2e10 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/interlaken-lac.txt @@ -223,37 +223,37 @@ lac-portals { reg = <0x9000 0x1000>; }; - lportal10: lac-portal@A000 { + lportal10: lac-portal@a000 { compatible = "fsl,interlaken-lac-portal-v1.0"; fsl,liodn = <0x20E>; reg = <0xA000 0x1000>; }; - lportal11: lac-portal@B000 { + lportal11: lac-portal@b000 { compatible = "fsl,interlaken-lac-portal-v1.0"; fsl,liodn = <0x20F>; reg = <0xB000 0x1000>; }; - lportal12: lac-portal@C000 { + lportal12: lac-portal@c000 { compatible = "fsl,interlaken-lac-portal-v1.0"; fsl,liodn = <0x210>; reg = <0xC000 0x1000>; }; - lportal13: lac-portal@D000 { + lportal13: lac-portal@d000 { compatible = "fsl,interlaken-lac-portal-v1.0"; fsl,liodn = <0x211>; reg = <0xD000 0x1000>; }; - lportal14: lac-portal@E000 { + lportal14: lac-portal@e000 { compatible = "fsl,interlaken-lac-portal-v1.0"; fsl,liodn = <0x212>; reg = <0xE000 0x1000>; }; - lportal15: lac-portal@F000 { + lportal15: lac-portal@f000 { compatible = "fsl,interlaken-lac-portal-v1.0"; fsl,liodn = <0x213>; reg = <0xF000 0x1000>; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt index 0f766333b6eb..37f91fa57654 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt @@ -8,7 +8,7 @@ Required properties: Example: -mcu@0a { +mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8349emitx", "fsl,mcu-mpc8349emitx"; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt index 4ccb2cd5df94..d096cf461d81 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt @@ -195,4 +195,4 @@ External interrupts: fsl,mpc5200-mscan nodes ----------------------- -See file can.txt in this directory. +See file Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt index 1ee81321c35e..1fa3f7182133 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-meson.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -5,6 +5,8 @@ Required properties: - compatible: Shall contain "amlogic,meson8b-pwm" or "amlogic,meson-gxbb-pwm" or "amlogic,meson-gxbb-ao-pwm" + or "amlogic,meson-axg-ee-pwm" + or "amlogic,meson-axg-ao-pwm" - #pwm-cells: Should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index c5171660eaf9..51ff54c8b8ef 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -14,7 +14,7 @@ Required properties: Example: - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index 7e94b802395d..74c118015980 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -9,6 +9,7 @@ Required Properties: - "renesas,pwm-r8a7794": for R-Car E2 - "renesas,pwm-r8a7795": for R-Car H3 - "renesas,pwm-r8a7796": for R-Car M3-W + - "renesas,pwm-r8a77995": for R-Car D3 - reg: base address and length of the registers block for the PWM. - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt index 0f2a6f8fcafd..27717e816e71 100644 --- a/Documentation/devicetree/bindings/regulator/da9211.txt +++ b/Documentation/devicetree/bindings/regulator/da9211.txt @@ -1,8 +1,9 @@ -* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator +* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 + Voltage Regulator Required properties: -- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" - or "dlg,da9214" or "dlg,da9215" +- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" + or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" - reg: I2C slave address, usually 0x68. - interrupts: the interrupt outputs of the controller - regulators: A node that houses a sub-node for each regulator within the @@ -16,7 +17,6 @@ Optional properties: - Any optional property defined in regulator.txt Example 1) DA9211 - pmic: da9211@68 { compatible = "dlg,da9211"; reg = <0x68>; @@ -35,7 +35,6 @@ Example 1) DA9211 }; Example 2) DA9212 - pmic: da9212@68 { compatible = "dlg,da9212"; reg = <0x68>; @@ -79,7 +78,25 @@ Example 3) DA9213 }; }; -Example 4) DA9214 +Example 4) DA9223 + pmic: da9223@68 { + compatible = "dlg,da9223"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + }; + }; + +Example 5) DA9214 pmic: da9214@68 { compatible = "dlg,da9214"; reg = <0x68>; @@ -105,7 +122,33 @@ Example 4) DA9214 }; }; -Example 5) DA9215 +Example 6) DA9224 + pmic: da9224@68 { + compatible = "dlg,da9224"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 7) DA9215 pmic: da9215@68 { compatible = "dlg,da9215"; reg = <0x68>; @@ -131,3 +174,28 @@ Example 5) DA9215 }; }; +Example 8) DA9225 + pmic: da9225@68 { + compatible = "dlg,da9225"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt index 0dded64d89d3..e9f7578ca09a 100644 --- a/Documentation/devicetree/bindings/regulator/max77686.txt +++ b/Documentation/devicetree/bindings/regulator/max77686.txt @@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 879e98d3b9aa..b82943d83677 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend". Example: - max77802@09 { + max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index 444c47831a40..c6dd3f5e485b 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -21,7 +21,7 @@ Each regulator is defined using the standard binding for regulators. Example 1: PFUZE100 - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -122,7 +122,7 @@ Example 1: PFUZE100 Example 2: PFUZE200 - pmic: pfuze200@08 { + pmic: pfuze200@8 { compatible = "fsl,pfuze200"; reg = <0x08>; @@ -216,7 +216,7 @@ Example 2: PFUZE200 Example 3: PFUZE3000 - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index 0fa3b0fac129..57d2c65899df 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -8,6 +8,7 @@ Qualcomm SPMI Regulators "qcom,pm8916-regulators" "qcom,pm8941-regulators" "qcom,pm8994-regulators" + "qcom,pmi8994-regulators" - interrupts: Usage: optional @@ -100,6 +101,15 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1-supply: + Usage: optional (pmi8994 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each @@ -122,6 +132,9 @@ pm8994: l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 +pmi8994: + s1, s2, s3, l1 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 378f6dc8b8bd..2babe15b618d 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -42,8 +42,16 @@ Optional properties: - regulator-state-[mem/disk] node has following common properties: - regulator-on-in-suspend: regulator should be on in suspend state. - regulator-off-in-suspend: regulator should be off in suspend state. - - regulator-suspend-microvolt: regulator should be set to this voltage - in suspend. + - regulator-suspend-min-microvolt: minimum voltage may be set in + suspend state. + - regulator-suspend-max-microvolt: maximum voltage may be set in + suspend state. + - regulator-suspend-microvolt: the default voltage which regulator + would be set in suspend. This property is now deprecated, instead + setting voltage for suspend mode via the API which regulator + driver provides is recommended. + - regulator-changeable-in-suspend: whether the default voltage and + the regulator on/off in suspend can be changed in runtime. - regulator-mode: operating mode in the given suspend state. The set of possible operating modes depends on the capabilities of every hardware so the valid modes are documented on each regulator @@ -107,7 +115,7 @@ regulators (twl_reg1 and twl_reg2), ... }; - mmc: mmc@0x0 { + mmc: mmc@0 { ... ... vmmc-supply = <&twl_reg1>; diff --git a/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt new file mode 100644 index 000000000000..63dc07877cd6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/sprd,sc2731-regulator.txt @@ -0,0 +1,43 @@ +Spreadtrum SC2731 Voltage regulators + +The SC2731 integrates low-voltage and low quiescent current DCDC/LDO. +14 LDO and 3 DCDCs are designed for external use. All DCDCs/LDOs have +their own bypass (power-down) control signals. External tantalum or MLCC +ceramic capacitors are recommended to use with these LDOs. + +Required properties: + - compatible: should be "sprd,sc27xx-regulator". + +List of regulators provided by this controller. It is named according to +its regulator type, BUCK_<name> and LDO_<name>. The definition for each +of these nodes is defined using the standard binding for regulators at +Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + BUCK_CPU0, BUCK_CPU1, BUCK_RF +LDO: + LDO_CAMA0, LDO_CAMA1, LDO_CAMMOT, LDO_VLDO, LDO_EMMCCORE, LDO_SDCORE, + LDO_SDIO, LDO_WIFIPA, LDO_USB33, LDO_CAMD0, LDO_CAMD1, LDO_CON, + LDO_CAMIO, LDO_SRAM + +Example: + regulators { + compatible = "sprd,sc27xx-regulator"; + + vddarm0: BUCK_CPU0 { + regulator-name = "vddarm0"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + vddcama0: LDO_CAMA0 { + regulator-name = "vddcama0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + }; + ... + }; diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt index 3944ee3e731e..5ddb8500a929 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt @@ -10,7 +10,7 @@ Required properties: - clocks: Must contain an entry for peripheral clock. Example: - vrefbuf: regulator@58003C00 { + vrefbuf: regulator@58003c00 { compatible = "st,stm32-vrefbuf"; reg = <0x58003C00 0x8>; clocks = <&rcc VREF_CK>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 7ff3f7903f26..00d3d58a102f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -10,6 +10,7 @@ on the Qualcomm Hexagon core. "qcom,q6v5-pil", "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" + "qcom,msm8996-mss-pil" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt new file mode 100644 index 000000000000..8562ba1dce69 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt @@ -0,0 +1,51 @@ +Qualcomm Remote File System Memory binding + +This binding describes the Qualcomm remote filesystem memory, which serves the +purpose of describing the shared memory region used for remote processors to +access block device data using the Remote Filesystem protocol. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be: + "qcom,rmtfs-mem" + +- reg: + Usage: required for static allocation + Value type: <prop-encoded-array> + Definition: must specify base address and size of the memory region, + as described in reserved-memory.txt + +- size: + Usage: required for dynamic allocation + Value type: <prop-encoded-array> + Definition: must specify a size of the memory region, as described in + reserved-memory.txt + +- qcom,client-id: + Usage: required + Value type: <u32> + Definition: identifier of the client to use this region for buffers. + +- qcom,vmid: + Usage: optional + Value type: <u32> + Definition: vmid of the remote processor, to set up memory protection. + += EXAMPLE +The following example shows the remote filesystem memory setup for APQ8016, +with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt index c8f775714887..4ca66c96fe97 100644 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt @@ -14,7 +14,7 @@ Required properties: example: -ahb1_rst: reset@01c202c0 { +ahb1_rst: reset@1c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-ahb1-reset"; reg = <0x01c202c0 0xc>; diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt index e746b631793a..28ef6c295c76 100644 --- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt @@ -5,7 +5,8 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset" +- compatible: Should be "amlogic,meson8b-reset", "amlogic,meson-gxbb-reset" or + "amlogic,meson-axg-reset". - reg: should contain the register address base - #reset-cells: 1, see below diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt index 13301777e11c..6ed79e60248a 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt @@ -14,7 +14,7 @@ Required properties: example: -src: src@020d8000 { +src: src@20d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; @@ -33,10 +33,10 @@ reset.txt example: - ipu1: ipu@02400000 { + ipu1: ipu@2400000 { resets = <&src 2>; }; - ipu2: ipu@02800000 { + ipu2: ipu@2800000 { resets = <&src 4>; }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index e5a03ffe04fb..a8014f3ab8ba 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -26,6 +26,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77970-rst" (R-Car V3M) - "renesas,r8a77995-rst" (R-Car D3) - reg: Address start and address range for the device. diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt new file mode 100644 index 000000000000..32d8435a41df --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt @@ -0,0 +1,33 @@ +Binding for the AXS10x reset controller + +This binding describes the ARC AXS10x boards custom IP-block which allows +to control reset signals of selected peripherals. For example DW GMAC, etc... +This block is controlled via memory-mapped register (AKA CREG) which +represents up-to 32 reset lines. + +As of today only the following lines are used: + - DW GMAC - line 5 + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,axs10x-reset". +- reg: should always contain pair address - length: for creg reset + bits register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset 5>; + .... + }; diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index c516d24959f2..86945502ccb5 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -67,7 +67,7 @@ using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 / { soc { - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 68a6f487c409..93efed629900 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -13,6 +13,7 @@ Required properties: "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-reset" - for LD11 SoC "socionext,uniphier-ld20-reset" - for LD20 SoC + "socionext,uniphier-pxs3-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -44,6 +45,7 @@ Required properties: "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) "socionext,uniphier-ld20-sd-reset" - for LD20 SoC + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -74,6 +76,7 @@ Required properties: "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-peri-reset" - for LD11 SoC "socionext,uniphier-ld20-peri-reset" - for LD20 SoC + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt new file mode 100644 index 000000000000..adf7b7af5dc3 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/cpus.txt @@ -0,0 +1,162 @@ +=================== +RISC-V CPU Bindings +=================== + +The device tree allows to describe the layout of CPUs in a system through +the "cpus" node, which in turn contains a number of subnodes (ie "cpu") +defining properties for every cpu. + +Bindings for CPU nodes follow the Devicetree Specification, available from: + +https://www.devicetree.org/specifications/ + +with updates for 32-bit and 64-bit RISC-V systems provided in this document. + +=========== +Terminology +=========== + +This document uses some terminology common to the RISC-V community that is not +widely used, the definitions of which are listed here: + +* hart: A hardware execution context, which contains all the state mandated by + the RISC-V ISA: a PC and some registers. This terminology is designed to + disambiguate software's view of execution contexts from any particular + microarchitectural implementation strategy. For example, my Intel laptop is + described as having one socket with two cores, each of which has two hyper + threads. Therefore this system has four harts. + +===================================== +cpus and cpu node bindings definition +===================================== + +The RISC-V architecture, in accordance with the Devicetree Specification, +requires the cpus and cpu nodes to be present and contain the properties +described below. + +- cpus node + + Description: Container of cpu nodes + + The node name must be "cpus". + + A cpus node must define the following properties: + + - #address-cells + Usage: required + Value type: <u32> + Definition: must be set to 1 + - #size-cells + Usage: required + Value type: <u32> + Definition: must be set to 0 + +- cpu node + + Description: Describes a hart context + + PROPERTIES + + - device_type + Usage: required + Value type: <string> + Definition: must be "cpu" + - reg + Usage: required + Value type: <u32> + Definition: The hart ID of this CPU node + - compatible: + Usage: required + Value type: <stringlist> + Definition: must contain "riscv", may contain one of + "sifive,rocket0" + - mmu-type: + Usage: optional + Value type: <string> + Definition: Specifies the CPU's MMU type. Possible values are + "riscv,sv32" + "riscv,sv39" + "riscv,sv48" + - riscv,isa: + Usage: required + Value type: <string> + Definition: Contains the RISC-V ISA string of this hart. These + ISA strings are defined by the RISC-V ISA manual. + +Example: SiFive Freedom U540G Development Kit +--------------------------------------------- + +This system contains two harts: a hart marked as disabled that's used for +low-level system tasks and should be ignored by Linux, and a second hart that +Linux is allowed to run on. + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <1000000>; + cpu@0 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + next-level-cache = <&L15 &L0>; + reg = <0>; + riscv,isa = "rv64imac"; + status = "disabled"; + L10: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu@1 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + next-level-cache = <&L15 &L0>; + reg = <1>; + riscv,isa = "rv64imafdc"; + status = "okay"; + tlb-split; + L13: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + +Example: Spike ISA Simulator with 1 Hart +---------------------------------------- + +This device tree matches the Spike ISA golden model as run with `spike -p1`. + + cpus { + cpu@0 { + device_type = "cpu"; + reg = <0x00000000>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + clock-frequency = <0x3b9aca00>; + interrupt-controller { + #interrupt-cells = <0x00000001>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + } + } + } diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt index 26542690b578..627b29531a32 100644 --- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt +++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.txt @@ -1,11 +1,19 @@ -BCM2835 Random number generator +BCM2835/6368 Random number generator Required properties: -- compatible : should be "brcm,bcm2835-rng" or "brcm,bcm-nsp-rng" or - "brcm,bcm5301x-rng" +- compatible : should be one of + "brcm,bcm2835-rng" + "brcm,bcm-nsp-rng" + "brcm,bcm5301x-rng" or + "brcm,bcm6368-rng" - reg : Specifies base physical address and size of the registers. +Optional properties: + +- clocks : phandle to clock-controller plus clock-specifier pair +- clock-names : "ipsec" as a clock name + Example: rng { @@ -17,3 +25,11 @@ rng@18033000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x18033000 0x14>; }; + +random: rng@10004180 { + compatible = "brcm,bcm6368-rng"; + reg = <0x10004180 0x14>; + + clocks = <&periph_clk 18>; + clock-names = "ipsec"; +}; diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm6368.txt b/Documentation/devicetree/bindings/rng/brcm,bcm6368.txt deleted file mode 100644 index 4b5ac600bfbd..000000000000 --- a/Documentation/devicetree/bindings/rng/brcm,bcm6368.txt +++ /dev/null @@ -1,17 +0,0 @@ -BCM6368 Random number generator - -Required properties: - -- compatible : should be "brcm,bcm6368-rng" -- reg : Specifies base physical address and size of the registers -- clocks : phandle to clock-controller plus clock-specifier pair -- clock-names : "ipsec" as a clock name - -Example: - random: rng@10004180 { - compatible = "brcm,bcm6368-rng"; - reg = <0x10004180 0x14>; - - clocks = <&periph_clk 18>; - clock-names = "ipsec"; - }; diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt index e25a456664b9..0014da9145af 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt @@ -1,7 +1,9 @@ HWRNG support for the iproc-rng200 driver Required properties: -- compatible : "brcm,iproc-rng200" +- compatible : Must be one of: + "brcm,bcm7278-rng200" + "brcm,iproc-rng200" - reg : base address and size of control register block Example: diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt deleted file mode 100644 index 916f57601a8f..000000000000 --- a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Dallas DS1339 I2C Serial Real-Time Clock - -Required properties: -- compatible: Should contain "dallas,ds1339". -- reg: I2C address for chip - -Optional properties: -- trickle-resistor-ohms : Selected resistor for trickle charger - Values usable for ds1339 are 250, 2000, 4000 - Should be given if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode - Should be given if internal trickle charger diode should be disabled -Example: - ds1339: rtc@68 { - compatible = "dallas,ds1339"; - trickle-resistor-ohms = <250>; - reg = <0x68>; - }; diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt index 323cf26374cb..c797bc9d77d2 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt @@ -1,20 +1,20 @@ * i.MX25 Real Time Clock controller -This binding supports the following chips: i.MX25, i.MX53 - Required properties: - compatible: should be: "fsl,imx25-rtc" - reg: physical base address of the controller and length of memory mapped region. +- clocks: should contain the phandle for the rtc clock - interrupts: rtc alarm interrupt Optional properties: -- interrupts: dryice security violation interrupt +- interrupts: dryice security violation interrupt (second entry) Example: -rtc@80056000 { - compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; - reg = <0x80056000 2000>; - interrupts = <29 56>; +rtc@53ffc000 { + compatible = "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + interrupts = <25 56>; }; diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt new file mode 100644 index 000000000000..76fdabc59742 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt @@ -0,0 +1,17 @@ +NXP PCF85363 Real Time Clock +============================ + +Required properties: +- compatible: Should contain "nxp,pcf85363". +- reg: I2C address for chip. + +Optional properties: +- interrupts: IRQ line for the RTC (not implemented). + +Example: + +pcf85363: pcf85363@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; +}; + diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt new file mode 100644 index 000000000000..d28d6e7f6ae8 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -0,0 +1,44 @@ +Dallas DS1307 and compatible RTC + +Required properties: +- compatible: should be one of: + "dallas,ds1307", + "dallas,ds1308", + "dallas,ds1337", + "dallas,ds1338", + "dallas,ds1339", + "dallas,ds1388", + "dallas,ds1340", + "dallas,ds1341", + "maxim,ds3231", + "st,m41t0", + "st,m41t00", + "microchip,mcp7940x", + "microchip,mcp7941x", + "pericom,pt7c4338", + "epson,rx8025", + "isil,isl12057" +- reg: I2C bus address of the device + +Optional properties: +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm +- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only + Selected resistor for trickle charger + Possible values are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : ds1339, ds1340 and ds 1388 only + Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled + +Example: + rtc1: ds1339@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupt-parent = <&gpio4>; + interrupts = <20 0>; + trickle-resistor-ohms = <250>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt new file mode 100644 index 000000000000..717d93860af1 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt @@ -0,0 +1,31 @@ +ST M41T80 family of RTC and compatible + +Required properties: +- compatible: should be one of: + "st,m41t62", + "st,m41t65", + "st,m41t80", + "st,m41t81", + "st,m41t81s", + "st,m41t82", + "st,m41t83", + "st,m41t84", + "st,m41t85", + "st,m41t87", + "microcrystal,rv4162", +- reg: I2C bus address of the device + +Optional properties: +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm + +Example: + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt new file mode 100644 index 000000000000..09fe8f51476f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt @@ -0,0 +1,21 @@ +Device-Tree bindings for MediaTek SoC based RTC + +Required properties: +- compatible : Should be + "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC +- reg : Specifies base physical address and size of the registers; +- interrupts : Should contain the interrupt for RTC alarm; +- clocks : Specifies list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : Should contain "rtc" entries + +Example: + +rtc: rtc@10212800 { + compatible = "mediatek,mt7622-rtc", + "mediatek,soc-rtc"; + reg = <0 0x10212800 0 0x200>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; +}; diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt new file mode 100644 index 000000000000..79d7e87b0d91 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mxc_v2.txt @@ -0,0 +1,17 @@ +* i.MX53 Secure Real Time Clock (SRTC) + +Required properties: +- compatible: should be: "fsl,imx53-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- clocks: should contain the phandle for the rtc clock +- interrupts: rtc alarm interrupt + +Example: + +rtc@53fa4000 { + compatible = "fsl,imx53-rtc"; + reg = <0x53fa4000 0x4000>; + interrupts = <24>; + clocks = <&clks IMX5_CLK_SRTC_GATE>; +}; diff --git a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt new file mode 100644 index 000000000000..58885b55da21 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt @@ -0,0 +1,13 @@ +SiRFSoC Real Time Clock + +Required properties: +- compatible: must be "sirf,prima2-sysrtc" +- reg: address range of rtc register set. +- interrupts: rtc alarm interrupts. + +Example: + rtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt new file mode 100644 index 000000000000..7c170da0d4b7 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt @@ -0,0 +1,27 @@ +Spreadtrum SC27xx Real Time Clock + +Required properties: +- compatible: should be "sprd,sc2731-rtc". +- reg: address offset of rtc register. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt new file mode 100644 index 000000000000..3ebeb311335f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt @@ -0,0 +1,17 @@ +ST-Ericsson COH 901 331 Real Time Clock + +Required properties: +- compatible: must be "stericsson,coh901331" +- reg: address range of rtc register set. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clocks: phandle to the rtc clock source + +Example: + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index d5e26d313f62..12c083c1140a 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -17,7 +17,7 @@ Required properties for new device trees Example: -rtc: rtc@01f00000 { +rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <0 40 4>, <0 41 4>; diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt index 6983aad376c3..4a8d79c1cf08 100644 --- a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -10,7 +10,7 @@ Required properties: Example: -rtc: rtc@01c20d00 { +rtc: rtc@1c20d00 { compatible = "allwinner,sun4i-a10-rtc"; reg = <0x01c20d00 0x20>; interrupts = <24>; diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt index b6a869f97715..df3bef7998fa 100644 --- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt @@ -8,7 +8,10 @@ Main node required properties: (b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset (c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset - sas-addr : array of 8 bytes for host SAS address - - reg : Address and length of the SAS register + - reg : Contains two regions. The first is the address and length of the SAS + register. The second is the address and length of CPLD register for + SGPIO control. The second is optional, and should be set only when + we use a CPLD for directly attached disk LED control. - hisilicon,sas-syscon: phandle of syscon used for sas control - ctrl-reset-reg : offset to controller reset register in ctrl reg - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index e6e6142e33ac..7c0d6b2f53e4 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -24,6 +24,7 @@ Optional properties: - dma-names: "rx" for RX channel, "tx" for TX channel. - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable USARTs. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt <chip> compatible description: - at91rm9200: legacy USART support diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt index 5c52e5eef16d..8b2b0460259a 100644 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt @@ -11,6 +11,11 @@ Required properties: - clocks: Clock driving the hardware; used to figure out the baud rate divisor. + +Optional properties: + +- clock-names: Should be "refclk". + Example: uart0: serial@14e00520 { @@ -19,6 +24,7 @@ Example: interrupt-parent = <&periph_intc>; interrupts = <2>; clocks = <&periph_clk>; + clock-names = "refclk"; }; clocks { diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt index 8adbab268ca3..4f8d8fde0c1c 100644 --- a/Documentation/devicetree/bindings/serial/efm32-uart.txt +++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt @@ -12,7 +12,7 @@ Optional properties: Example: -uart@0x4000c400 { +uart@4000c400 { compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15>; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 574c3a2c77d5..afcfbc34e243 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -6,9 +6,10 @@ Required properties: - interrupts : Should contain uart interrupt Optional properties: -- fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx, + linux,rs485-enabled-at-boot-time: see rs485.txt Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index a1252a047f78..6bd3f2e93d61 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -16,6 +16,8 @@ Required properties: Optional properties: - dmas: A list of two dma specifiers, one for each entry in dma-names. - dma-names: should contain "tx" and "rx". +- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx, + linux,rs485-enabled-at-boot-time: see rs485.txt Note: Optional properties for DMA support. Write them both or both not. diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/Documentation/devicetree/bindings/serial/ingenic,uart.txt index 02cb7fe59cb7..c3c6406d5cfe 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.txt +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.txt @@ -1,8 +1,12 @@ * Ingenic SoC UART Required properties: -- compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart", - "ingenic,jz4775-uart" or "ingenic,jz4780-uart" +- compatible : One of: + - "ingenic,jz4740-uart", + - "ingenic,jz4760-uart", + - "ingenic,jz4770-uart", + - "ingenic,jz4775-uart", + - "ingenic,jz4780-uart". - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. - clocks : phandles to the module & baud clocks. diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt index 5b78591aaa46..3acbd309ab9d 100644 --- a/Documentation/devicetree/bindings/serial/lantiq_asc.txt +++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt @@ -8,7 +8,7 @@ Required properties: Example: -asc1: serial@E100C00 { +asc1: serial@e100c00 { compatible = "lantiq,asc"; reg = <0xE100C00 0x400>; interrupt-parent = <&icu0>; diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt index 83a919c241b0..823f77dd7978 100644 --- a/Documentation/devicetree/bindings/serial/maxim,max310x.txt +++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt @@ -24,13 +24,27 @@ Optional properties: 1 = active low. Example: + +/ { + clocks { + spi_uart_clk: osc_max14830 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3686400>; + }; + + }; +}; + +&spi0 { max14830: max14830@0 { compatible = "maxim,max14830"; reg = <0>; - clocks = <&clk20m>; + clocks = <&spi_uart_clk>; clock-names = "osc"; interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; gpio-controller; #gpio-cells = <2>; }; +}; diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 6087defd9f93..2ae2fee7e023 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -1,13 +1,53 @@ -* Marvell UART : Non standard UART used in some of Marvell EBU SoCs (e.g., Armada-3700) +* Marvell UART : Non standard UART used in some of Marvell EBU SoCs + e.g., Armada-3700. Required properties: -- compatible: "marvell,armada-3700-uart" +- compatible: + - "marvell,armada-3700-uart" for the standard variant of the UART + (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the + FIFO, baudrate limited to 230400). + - "marvell,armada-3700-uart-ext" for the extended variant of the + UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit + accesses to the FIFO, baudrate unlimited by the dividers). - reg: offset and length of the register set for the device. -- interrupts: device interrupt +- clocks: UART reference clock used to derive the baudrate. If no clock + is provided (possible only with the "marvell,armada-3700-uart" + compatible string for backward compatibility), it will only work + if the baudrate was initialized by the bootloader and no baudrate + change will then be possible. +- interrupts: + - Must contain three elements for the standard variant of the IP + (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx", + respectively the UART sum interrupt, the UART TX interrupt and + UART RX interrupt. A corresponding interrupt-names property must + be defined. + - Must contain two elements for the extended variant of the IP + (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx", + respectively the UART TX interrupt and the UART RX interrupt. A + corresponding interrupts-names property must be defined. + - For backward compatibility reasons, a single element interrupts + property is also supported for the standard variant of the IP, + containing only the UART sum interrupt. This form is deprecated + and should no longer be used. Example: - serial@12000 { + uart0: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; - interrupts = <43>; + reg = <0x12000 0x200>; + clocks = <&xtalclk>; + interrupts = + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; + }; + + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + reg = <0x12200 0x30>; + clocks = <&xtalclk>; + interrupts = + <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "uart-tx", "uart-rx"; }; diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt index 7a71b5de77d6..4b0f05adb228 100644 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -19,6 +19,8 @@ Optional properties: - dmas : DMA specifier, consisting of a phandle to the DMA controller node and a DMA channel number. - dma-names : "rx" for receive channel, "tx" for transmit channel. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt +- rs485-rts-active-high: drive RTS high when sending (default is low). Example: diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index b8415936dfdb..b7c29f74ebb2 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -12,6 +12,7 @@ Optional properties: * b is the delay between end of data sent and rts signal in milliseconds it corresponds to the delay after sending data and actual release of the line. If this property is not specified, <0 0> is assumed. +- rs485-rts-active-low: drive RTS low when sending (default is high). - linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485 feature at boot time. It can be disabled later with proper ioctl. - rs485-rx-during-tx: empty property that enables the receiving of data even diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 3657f9f9d17a..d150b04a6229 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -2,14 +2,10 @@ Required properties: - compatible: can be either: - - "st,stm32-usart", - "st,stm32-uart", - - "st,stm32f7-usart", - "st,stm32f7-uart", - - "st,stm32h7-usart" - "st,stm32h7-uart". - depending on whether the device supports synchronous mode - and is compatible with stm32(f4), stm32f7 or stm32h7. + depending is compatible with stm32(f4), stm32f7 or stm32h7. - reg: The address and length of the peripheral registers space - interrupts: - The interrupt line for the USART instance, @@ -33,7 +29,7 @@ usart4: serial@40004c00 { }; usart2: serial@40004400 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; clocks = <&clk_pclk1>; @@ -43,7 +39,7 @@ usart2: serial@40004400 { }; usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 0 164>; diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt index f311472990a7..75996b6111bb 100644 --- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt +++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt @@ -14,7 +14,7 @@ Required properties: Example: - ps20: ps2@0x01c2a000 { + ps20: ps2@01c2a000 { compatible = "allwinner,sun4i-a10-ps2"; reg = <0x01c2a000 0x400>; interrupts = <0 62 4>; diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt new file mode 100644 index 000000000000..55259cf39c25 --- /dev/null +++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt @@ -0,0 +1,19 @@ +Eckelmann SIOX GPIO bus + +Required properties: +- compatible : "eckelmann,siox-gpio" +- din-gpios, dout-gpios, dclk-gpios, dld-gpios: references gpios for the + corresponding bus signals. + +Examples: + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + + din-gpios = <&gpio6 11 0>; + dout-gpios = <&gpio6 8 0>; + dclk-gpios = <&gpio6 9 0>; + dld-gpios = <&gpio6 10 0>; + }; diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt new file mode 100644 index 000000000000..52fa6426388c --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/bus.txt @@ -0,0 +1,50 @@ +SLIM(Serial Low Power Interchip Media Bus) bus + +SLIMbus is a 2-wire bus, and is used to communicate with peripheral +components like audio-codec. + +Required property for SLIMbus controller node: +- compatible - name of SLIMbus controller + +Child nodes: +Every SLIMbus controller node can contain zero or more child nodes +representing slave devices on the bus. Every SLIMbus slave device is +uniquely determined by the enumeration address containing 4 fields: +Manufacturer ID, Product code, Device index, and Instance value for +the device. +If child node is not present and it is instantiated after device +discovery (slave device reporting itself present). + +In some cases it may be necessary to describe non-probeable device +details such as non-standard ways of powering up a device. In +such cases, child nodes for those devices will be present as +slaves of the SLIMbus controller, as detailed below. + +Required property for SLIMbus child node if it is present: +- reg - Should be ('Device index', 'Instance ID') from SLIMbus + Enumeration Address. + Device Index Uniquely identifies multiple Devices within + a single Component. + Instance ID Is for the cases where multiple Devices of the + same type or Class are attached to the bus. + +- compatible -"slimMID,PID". The textual representation of Manufacturer ID, + Product Code, shall be in lower case hexadecimal with leading + zeroes suppressed + +SLIMbus example for Qualcomm's slimbus manager component: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + codec: wcd9310@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt new file mode 100644 index 000000000000..922dcb8ff24a --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt @@ -0,0 +1,39 @@ +Qualcomm SLIMbus controller +This controller is used if applications processor driver controls SLIMbus +master component. + +Required properties: + + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + + - reg : Offset and length of the register region(s) for the device + - reg-names : Register region name(s) referenced in reg above + Required register resource entries are: + "ctrl": Physical address of controller register blocks + "slew": required for "qcom,apq8064-slim" SOC. + - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible + followed by "qcom,slim" for fallback. + - interrupts : Interrupt number used by this controller + - clocks : Interface and core clocks used by this SLIMbus controller + - clock-names : Required clock-name entries are: + "iface" : Interface clock for this controller + "core" : Interrupt for controller core's BAM + +Example: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207C 4>; + reg-names = "ctrl", "slew"; + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + wcd9310: audio-codec@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt index 47ac834414d8..48eed140765b 100644 --- a/Documentation/devicetree/bindings/soc/fsl/bman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -65,8 +65,8 @@ to the respective BMan instance BMan Private Memory Node BMan requires a contiguous range of physical memory used for the backing store -for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a -node under the /reserved-memory node +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as +a node under the /reserved-memory node. The BMan FBPR memory node must be named "bman-fbpr" @@ -75,7 +75,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,bman-fbpr" + Definition: PPC platforms: Must include "fsl,bman-fbpr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FBPR private memory: - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to @@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node ranges; bman_fbpr: bman-fbpr { - compatible = "fsl,bman-fbpr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-mem-pool"; size = <0 0x1000000>; alignment = <0 0x1000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt index 60984260207b..09b1b05fa677 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt @@ -18,7 +18,7 @@ par_io@1400 { #size-cells = <0>; device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { + ucc_pin@1 { ...... }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt index ec6ee2e864a2..5bde8b98a8c9 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt @@ -26,7 +26,7 @@ Required properties: interrupts. Example: - ucc_pin@01 { + ucc_pin@1 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 3 1 0 1 0 /* TxD0 */ diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt index 556ebb8be75d..ee96afd2af72 100644 --- a/Documentation/devicetree/bindings/soc/fsl/qman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc Value type: <prop-encoded-array> Definition: Reference input clock. Its frequency is half of the platform clock +- memory-regions + Usage: Required for ARM + Value type: <phandle array> + Definition: List of phandles referencing the QMan private memory + nodes (described below). The qman-fqd node must be + first followed by qman-pfdr node. Only used on ARM Devices connected to a QMan instance via Direct Connect Portals (DCP) must link to the respective QMan instance @@ -74,7 +80,9 @@ QMan Private Memory Nodes QMan requires two contiguous range of physical memory used for the backing store for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). -This memory is reserved/allocated as a nodes under the /reserved-memory node +This memory is reserved/allocated as a node under the /reserved-memory node. + +For additional details about reserved memory regions see reserved-memory.txt The QMan FQD memory node must be named "qman-fqd" @@ -83,7 +91,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,qman-fqd" + Definition: PPC platforms: Must include "fsl,qman-fqd" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The QMan PFDR memory node must be named "qman-pfdr" @@ -92,7 +102,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,qman-pfdr" + Definition: PPC platforms: Must include "fsl,qman-pfdr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FQD and PFDR private memory: - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to @@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes ranges; qman_fqd: qman-fqd { - compatible = "fsl,qman-fqd"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x400000>; alignment = <0 0x400000>; + no-map; }; qman_pfdr: qman-pfdr { - compatible = "fsl,qman-pfdr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x2000000>; alignment = <0 0x2000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 107700d00df4..bf80e3f96f8c 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -19,6 +19,7 @@ IP Pairing Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs + "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs - interrupts: IRQ for pwrap in SOC @@ -36,9 +37,12 @@ Required properties in pwrap device node. - clocks: Must contain an entry for each entry in clock-names. Optional properities: -- pmic: Mediatek PMIC MFD is the child device of pwrap +- pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt + or the regulator-only device as the child device of pwrap, such as MT6380. + See the following definitions for such kinds of devices. + Documentation/devicetree/bindings/regulator/mt6380-regulator.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt index 40056f7990f8..76bf45b893fa 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -12,11 +12,13 @@ power/power_domain.txt. It provides the power domains defined in - include/dt-bindings/power/mt8173-power.h - include/dt-bindings/power/mt6797-power.h - include/dt-bindings/power/mt2701-power.h +- include/dt-bindings/power/mt2712-power.h - include/dt-bindings/power/mt7622-power.h Required properties: - compatible: Should be one of: - "mediatek,mt2701-scpsys" + - "mediatek,mt2712-scpsys" - "mediatek,mt6797-scpsys" - "mediatek,mt7622-scpsys" - "mediatek,mt8173-scpsys" @@ -27,6 +29,7 @@ Required properties: These are clocks which hardware needs to be enabled before enabling certain power domains. Required clocks for MT2701: "mm", "mfg", "ethif" + Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" Required clocks for MT6797: "mm", "mfg", "vdec" Required clocks for MT7622: "hif_sel" Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index b277eca861f7..9663cab52246 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function Definition: a list of channels tied to this function, used for matching the function to a set of virtual channels +- qcom,intents: + Usage: optional + Value type: <prop-encoded-array> + Definition: a list of size,amount pairs describing what intents should + be preallocated for this virtual channel. This can be used + to tweak the default intents available for the channel to + meet expectations of the remote. + = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for @@ -69,6 +77,8 @@ regualtors and root clocks. compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + qcom,intents = <0x400 5 + 0x800 1>; ... }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt index af9ca37221ce..a35af2dafdad 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt @@ -17,9 +17,15 @@ processor ID) and a string identifier. Value type: <prop-encoded-array> Definition: one entry specifying the smp2p notification interrupt -- qcom,ipc: +- mboxes: Usage: required Value type: <prop-encoded-array> + Definition: reference to the associated doorbell in APCS, as described + in mailbox/mailbox.txt + +- qcom,ipc: + Usage: required, unless mboxes is specified + Value type: <prop-encoded-array> Definition: three entries specifying the outgoing ipc bit used for signaling the remote end of the smp2p edge: - phandle to a syscon node representing the apcs registers diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt index 4ea39e9186a7..042a2e4159bd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -37,6 +37,11 @@ The following properties are defined to the bluetooth node: Definition: must be: "qcom,wcnss-bt" +- local-bd-address: + Usage: optional + Value type: <u8 array> + Definition: see Documentation/devicetree/bindings/net/bluetooth.txt + == WiFi The following properties are defined to the WiFi node: @@ -91,6 +96,9 @@ smd { bt { compatible = "qcom,wcnss-bt"; + + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; }; wlan { diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index 64c66a5644e7..77cd42cc5f54 100644 --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -220,7 +220,7 @@ qmss: qmss@2a40000 { #address-cells = <1>; #size-cells = <1>; ranges; - pdsp0@0x2a10000 { + pdsp0@2a10000 { reg = <0x2a10000 0x1000>, <0x2a0f000 0x100>, <0x2a0c000 0x3c8>, diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt index 66e6265fb0aa..f7b00a7c0f68 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -51,7 +51,7 @@ of valid identifiers for k2g. Example (K2G): -------------------- - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ns16550a"; ... power-domains = <&k2g_pds 0x002c>; diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt new file mode 100644 index 000000000000..6786d6715df0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt @@ -0,0 +1,31 @@ +LogicoreIP designed compatible with Xilinx ZYNQ family. +------------------------------------------------------- + +General concept +--------------- + +LogicoreIP design to provide the isolation between processing system +and programmable logic. Also provides the list of register set to configure +the frequency. + +Required properties: +- compatible: shall be one of: + "xlnx,vcu" + "xlnx,vcu-logicoreip-1.0" +- reg, reg-names: There are two sets of registers need to provide. + 1. vcu slcr + 2. Logicore + reg-names should contain name for the each register sequence. +- clocks: phandle for aclk and pll_ref clocksource +- clock-names: The identification string, "aclk", is always required for + the axi clock. "pll_ref" is required for pll. +Example: + + xlnx_vcu: vcu@a0040000 { + compatible = "xlnx,vcu-logicoreip-1.0"; + reg = <0x0 0xa0040000 0x0 0x1000>, + <0x0 0xa0041000 0x0 0x1000>; + reg-names = "vcu_slcr", "logicore"; + clocks = <&si570_1>, <&clkc 71>; + clock-names = "pll_ref", "aclk"; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt index 5875ca459ed1..4248b662deff 100644 --- a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt +++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt @@ -21,7 +21,7 @@ please check: Example: - i2s: i2s@0x77600000 { + i2s: i2s@77600000 { compatible = "adi,axi-i2s-1.00.a"; reg = <0x77600000 0x1000>; clocks = <&clk 15>, <&audio_clock>; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt index 4eb7997674a0..7b664e7cb4ae 100644 --- a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt +++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt @@ -20,7 +20,7 @@ please check: Example: - spdif: spdif@0x77400000 { + spdif: spdif@77400000 { compatible = "adi,axi-spdif-tx-1.00.a"; reg = <0x77600000 0x1000>; clocks = <&clk 15>, <&audio_clock>; diff --git a/Documentation/devicetree/bindings/sound/ak4613.txt b/Documentation/devicetree/bindings/sound/ak4613.txt index 1783f9ef0930..49a2e74fd9cb 100644 --- a/Documentation/devicetree/bindings/sound/ak4613.txt +++ b/Documentation/devicetree/bindings/sound/ak4613.txt @@ -20,7 +20,7 @@ Optional properties: Example: &i2c { - ak4613: ak4613@0x10 { + ak4613: ak4613@10 { compatible = "asahi-kasei,ak4613"; reg = <0x10>; }; diff --git a/Documentation/devicetree/bindings/sound/ak4642.txt b/Documentation/devicetree/bindings/sound/ak4642.txt index 340784db6808..58e48ee97175 100644 --- a/Documentation/devicetree/bindings/sound/ak4642.txt +++ b/Documentation/devicetree/bindings/sound/ak4642.txt @@ -17,7 +17,7 @@ Optional properties: Example 1: &i2c { - ak4648: ak4648@0x12 { + ak4648: ak4648@12 { compatible = "asahi-kasei,ak4642"; reg = <0x12>; }; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 6e6720aa33f1..d04ea3b1a1dd 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -17,6 +17,7 @@ Below are same as Simple-Card. - bitclock-master - bitclock-inversion - frame-inversion +- mclk-fs - dai-tdm-slot-num - dai-tdm-slot-width - clocks / system-clock-frequency diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 8b8afe9fcb31..441dd6f29df1 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -43,7 +43,7 @@ Example 1. Sampling Rate Conversion label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port>; @@ -79,7 +79,8 @@ Example 2. 2 CPU 1 Codec (Mixing) label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port0 diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt index befd125d18bb..860fc0da39c0 100644 --- a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt +++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt @@ -9,7 +9,7 @@ Required properties: Examples: - i2s0: xtfpga-i2s@0d080000 { + i2s0: xtfpga-i2s@d080000 { #sound-dai-cells = <0>; compatible = "cdns,xtfpga-i2s"; reg = <0x0d080000 0x40>; diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt index 4feb0eb27ea4..4ba520a28ae8 100644 --- a/Documentation/devicetree/bindings/sound/cs42l56.txt +++ b/Documentation/devicetree/bindings/sound/cs42l56.txt @@ -55,7 +55,7 @@ Example: codec: codec@4b { compatible = "cirrus,cs42l56"; reg = <0x4b>; - gpio-reset = <&gpio 10 0>; + cirrus,gpio-nreset = <&gpio 10 0>; cirrus,chgfreq-divisor = <0x05>; cirrus.ain1_ref_cfg; cirrus,micbias-lvl = <5>; diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt index 5ca5a709b6aa..3ab9dfef38d1 100644 --- a/Documentation/devicetree/bindings/sound/da7218.txt +++ b/Documentation/devicetree/bindings/sound/da7218.txt @@ -73,7 +73,7 @@ Example: compatible = "dlg,da7218"; reg = <0x1a>; interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; wakeup-source; VDD-supply = <®_audio>; diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt index cf61681826b6..5b54d2d045c3 100644 --- a/Documentation/devicetree/bindings/sound/da7219.txt +++ b/Documentation/devicetree/bindings/sound/da7219.txt @@ -77,7 +77,7 @@ Example: reg = <0x1a>; interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; VDD-supply = <®_audio>; VDDMIC-supply = <®_audio>; diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt index 54c8ef6498a8..f7bf65611453 100644 --- a/Documentation/devicetree/bindings/sound/dmic.txt +++ b/Documentation/devicetree/bindings/sound/dmic.txt @@ -7,10 +7,12 @@ Required properties: Optional properties: - dmicen-gpios: GPIO specifier for dmic to control start and stop + - num-channels: Number of microphones on this DAI Example node: dmic_codec: dmic@0 { compatible = "dmic-codec"; dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + num-channels = <1>; }; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 65979b205893..f5a14115b459 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -41,7 +41,7 @@ Required properties: Example: -asrc: asrc@02034000 { +asrc: asrc@2034000 { compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 21c401e2ccda..cacd18bb9ba6 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -48,7 +48,7 @@ Required properties: Example: -esai: esai@02024000 { +esai: esai@2024000 { compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 0f97e54c3d43..38cfa7573441 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -39,7 +39,7 @@ Required properties: Example: -spdif: spdif@02004000 { +spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; diff --git a/Documentation/devicetree/bindings/sound/img,i2s-out.txt b/Documentation/devicetree/bindings/sound/img,i2s-out.txt index 0159415b3338..6b0ee9b7e11b 100644 --- a/Documentation/devicetree/bindings/sound/img,i2s-out.txt +++ b/Documentation/devicetree/bindings/sound/img,i2s-out.txt @@ -35,7 +35,7 @@ Optional Properties: Example: -i2s_out: i2s-out@18100A00 { +i2s_out: i2s-out@18100a00 { compatible = "img,i2s-out"; reg = <0x18100A00 0x200>; interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/img,parallel-out.txt b/Documentation/devicetree/bindings/sound/img,parallel-out.txt index a3015d2a06e0..37a3f94cc126 100644 --- a/Documentation/devicetree/bindings/sound/img,parallel-out.txt +++ b/Documentation/devicetree/bindings/sound/img,parallel-out.txt @@ -29,7 +29,7 @@ Optional Properties: Example: -parallel_out: parallel-out@18100C00 { +parallel_out: parallel-out@18100c00 { compatible = "img,parallel-out"; reg = <0x18100C00 0x100>; interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/img,spdif-in.txt b/Documentation/devicetree/bindings/sound/img,spdif-in.txt index aab9a81f7e13..f7ea8c87bf34 100644 --- a/Documentation/devicetree/bindings/sound/img,spdif-in.txt +++ b/Documentation/devicetree/bindings/sound/img,spdif-in.txt @@ -29,7 +29,7 @@ Optional Properties: Example: -spdif_in: spdif-in@18100E00 { +spdif_in: spdif-in@18100e00 { compatible = "img,spdif-in"; reg = <0x18100E00 0x100>; interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/img,spdif-out.txt b/Documentation/devicetree/bindings/sound/img,spdif-out.txt index 470a5191e101..413ed8b01870 100644 --- a/Documentation/devicetree/bindings/sound/img,spdif-out.txt +++ b/Documentation/devicetree/bindings/sound/img,spdif-out.txt @@ -29,7 +29,7 @@ Optional Properties: Example: -spdif_out: spdif-out@18100D00 { +spdif_out: spdif-out@18100d00 { compatible = "img,spdif-out"; reg = <0x18100D00 0x100>; interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index b30a737e209e..2db4dcbee1b9 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -22,7 +22,7 @@ Required properties of optional child nodes: Example: -audmux@021d8000 { +audmux@21d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; }; diff --git a/Documentation/devicetree/bindings/sound/max98371.txt b/Documentation/devicetree/bindings/sound/max98371.txt index 6c285235e64b..8b2b2704b574 100644 --- a/Documentation/devicetree/bindings/sound/max98371.txt +++ b/Documentation/devicetree/bindings/sound/max98371.txt @@ -10,7 +10,7 @@ Required properties: Example: &i2c { - max98371: max98371@0x31 { + max98371: max98371@31 { compatible = "maxim,max98371"; reg = <0x31>; }; diff --git a/Documentation/devicetree/bindings/sound/max98373.txt b/Documentation/devicetree/bindings/sound/max98373.txt new file mode 100644 index 000000000000..456cb1c59353 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98373.txt @@ -0,0 +1,40 @@ +Maxim Integrated MAX98373 Speaker Amplifier + +This device supports I2C. + +Required properties: + + - compatible : "maxim,max98373" + + - reg : the I2C address of the device. + +Optional properties: + + - maxim,vmon-slot-no : slot number used to send voltage information + or in inteleave mode this will be used as + interleave slot. + slot range : 0 ~ 15, Default : 0 + + - maxim,imon-slot-no : slot number used to send current information + slot range : 0 ~ 15, Default : 0 + + - maxim,spkfb-slot-no : slot number used to send speaker feedback information + slot range : 0 ~ 15, Default : 0 + + - maxim,interleave-mode : For cases where a single combined channel + for the I/V sense data is not sufficient, the device can also be configured + to share a single data output channel on alternating frames. + In this configuration, the current and voltage data will be frame interleaved + on a single output channel. + Boolean, define to enable the interleave mode, Default : false + +Example: + +codec: max98373@31 { + compatible = "maxim,max98373"; + reg = <0x31>; + maxim,vmon-slot-no = <0>; + maxim,imon-slot-no = <1>; + maxim,spkfb-slot-no = <2>; + maxim,interleave-mode; +}; diff --git a/Documentation/devicetree/bindings/sound/max9867.txt b/Documentation/devicetree/bindings/sound/max9867.txt index 394cd4eb17ec..b8bd914ee697 100644 --- a/Documentation/devicetree/bindings/sound/max9867.txt +++ b/Documentation/devicetree/bindings/sound/max9867.txt @@ -10,7 +10,7 @@ Required properties: Example: &i2c { - max9867: max9867@0x18 { + max9867: max9867@18 { compatible = "maxim,max9867"; reg = <0x18>; }; diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt index 77a57f84bed4..6df87b97f7cb 100644 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt @@ -2,153 +2,143 @@ Mediatek AFE PCM controller for mt2701 Required properties: - compatible = "mediatek,mt2701-audio"; -- reg: register location and size - interrupts: should contain AFE and ASYS interrupts - interrupt-names: should be "afe" and "asys" - power-domains: should define the power domain +- clocks: Must contain an entry for each entry in clock-names + See ../clocks/clock-bindings.txt for details - clock-names: should have these clock names: "infra_sys_audio_clk", "top_audio_mux1_sel", "top_audio_mux2_sel", - "top_audio_mux1_div", - "top_audio_mux2_div", - "top_audio_48k_timing", - "top_audio_44k_timing", - "top_audpll_mux_sel", - "top_apll_sel", - "top_aud1_pll_98M", - "top_aud2_pll_90M", - "top_hadds2_pll_98M", - "top_hadds2_pll_294M", - "top_audpll", - "top_audpll_d4", - "top_audpll_d8", - "top_audpll_d16", - "top_audpll_d24", - "top_audintbus_sel", - "clk_26m", - "top_syspll1_d4", - "top_aud_k1_src_sel", - "top_aud_k2_src_sel", - "top_aud_k3_src_sel", - "top_aud_k4_src_sel", - "top_aud_k5_src_sel", - "top_aud_k6_src_sel", - "top_aud_k1_src_div", - "top_aud_k2_src_div", - "top_aud_k3_src_div", - "top_aud_k4_src_div", - "top_aud_k5_src_div", - "top_aud_k6_src_div", - "top_aud_i2s1_mclk", - "top_aud_i2s2_mclk", - "top_aud_i2s3_mclk", - "top_aud_i2s4_mclk", - "top_aud_i2s5_mclk", - "top_aud_i2s6_mclk", - "top_asm_m_sel", - "top_asm_h_sel", - "top_univpll2_d4", - "top_univpll2_d2", - "top_syspll_d5"; + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; +- assigned-clocks: list of input clocks and dividers for the audio system. + See ../clocks/clock-bindings.txt for details. +- assigned-clocks-parents: parent of input clocks of assigned clocks. +- assigned-clock-rates: list of clock frequencies of assigned clocks. + +Must be a subnode of MediaTek audsys device tree node. +See ../arm/mediatek/mediatek,audsys.txt for details about the parent node. Example: - afe: mt2701-afe-pcm@11220000 { - compatible = "mediatek,mt2701-audio"; - reg = <0 0x11220000 0 0x2000>, - <0 0x112A0000 0 0x20000>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - clocks = <&infracfg CLK_INFRA_AUDIO>, - <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_MUX1_DIV>, - <&topckgen CLK_TOP_AUD_MUX2_DIV>, - <&topckgen CLK_TOP_AUD_48K_TIMING>, - <&topckgen CLK_TOP_AUD_44K_TIMING>, - <&topckgen CLK_TOP_AUDPLL_MUX_SEL>, - <&topckgen CLK_TOP_APLL_SEL>, - <&topckgen CLK_TOP_AUD1PLL_98M>, - <&topckgen CLK_TOP_AUD2PLL_90M>, - <&topckgen CLK_TOP_HADDS2PLL_98M>, - <&topckgen CLK_TOP_HADDS2PLL_294M>, - <&topckgen CLK_TOP_AUDPLL>, - <&topckgen CLK_TOP_AUDPLL_D4>, - <&topckgen CLK_TOP_AUDPLL_D8>, - <&topckgen CLK_TOP_AUDPLL_D16>, - <&topckgen CLK_TOP_AUDPLL_D24>, - <&topckgen CLK_TOP_AUDINTBUS_SEL>, - <&clk26m>, - <&topckgen CLK_TOP_SYSPLL1_D4>, - <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K5_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K6_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K5_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K6_SRC_DIV>, - <&topckgen CLK_TOP_AUD_I2S1_MCLK>, - <&topckgen CLK_TOP_AUD_I2S2_MCLK>, - <&topckgen CLK_TOP_AUD_I2S3_MCLK>, - <&topckgen CLK_TOP_AUD_I2S4_MCLK>, - <&topckgen CLK_TOP_AUD_I2S5_MCLK>, - <&topckgen CLK_TOP_AUD_I2S6_MCLK>, - <&topckgen CLK_TOP_ASM_M_SEL>, - <&topckgen CLK_TOP_ASM_H_SEL>, - <&topckgen CLK_TOP_UNIVPLL2_D4>, - <&topckgen CLK_TOP_UNIVPLL2_D2>, - <&topckgen CLK_TOP_SYSPLL_D5>; + audsys: audio-subsystem@11220000 { + compatible = "mediatek,mt2701-audsys", "syscon", "simple-mfd"; + ... + + afe: audio-controller { + compatible = "mediatek,mt2701-audio"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&audsys CLK_AUD_I2SO1>, + <&audsys CLK_AUD_I2SO2>, + <&audsys CLK_AUD_I2SO3>, + <&audsys CLK_AUD_I2SO4>, + <&audsys CLK_AUD_I2SIN1>, + <&audsys CLK_AUD_I2SIN2>, + <&audsys CLK_AUD_I2SIN3>, + <&audsys CLK_AUD_I2SIN4>, + <&audsys CLK_AUD_ASRCO1>, + <&audsys CLK_AUD_ASRCO2>, + <&audsys CLK_AUD_ASRCO3>, + <&audsys CLK_AUD_ASRCO4>, + <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_AFE_CONN>, + <&audsys CLK_AUD_A1SYS>, + <&audsys CLK_AUD_A2SYS>, + <&audsys CLK_AUD_AFE_MRGIF>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; - clock-names = "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_mux1_div", - "top_audio_mux2_div", - "top_audio_48k_timing", - "top_audio_44k_timing", - "top_audpll_mux_sel", - "top_apll_sel", - "top_aud1_pll_98M", - "top_aud2_pll_90M", - "top_hadds2_pll_98M", - "top_hadds2_pll_294M", - "top_audpll", - "top_audpll_d4", - "top_audpll_d8", - "top_audpll_d16", - "top_audpll_d24", - "top_audintbus_sel", - "clk_26m", - "top_syspll1_d4", - "top_aud_k1_src_sel", - "top_aud_k2_src_sel", - "top_aud_k3_src_sel", - "top_aud_k4_src_sel", - "top_aud_k5_src_sel", - "top_aud_k6_src_sel", - "top_aud_k1_src_div", - "top_aud_k2_src_div", - "top_aud_k3_src_div", - "top_aud_k4_src_div", - "top_aud_k5_src_div", - "top_aud_k6_src_div", - "top_aud_i2s1_mclk", - "top_aud_i2s2_mclk", - "top_aud_i2s3_mclk", - "top_aud_i2s4_mclk", - "top_aud_i2s5_mclk", - "top_aud_i2s6_mclk", - "top_asm_m_sel", - "top_asm_h_sel", - "top_univpll2_d4", - "top_univpll2_d2", - "top_syspll_d5"; + assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; }; diff --git a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt index 601c518eddaa..4eb980bd0287 100644 --- a/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/mxs-audio-sgtl5000.txt @@ -1,10 +1,31 @@ * Freescale MXS audio complex with SGTL5000 codec Required properties: -- compatible: "fsl,mxs-audio-sgtl5000" -- model: The user-visible name of this sound complex -- saif-controllers: The phandle list of the MXS SAIF controller -- audio-codec: The phandle of the SGTL5000 audio codec +- compatible : "fsl,mxs-audio-sgtl5000" +- model : The user-visible name of this sound complex +- saif-controllers : The phandle list of the MXS SAIF controller +- audio-codec : The phandle of the SGTL5000 audio codec +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, SGTL5000 + pins, and the jacks on the board: + + Power supplies: + * Mic Bias + + SGTL5000 pins: + * MIC_IN + * LINE_IN + * HP_OUT + * LINE_OUT + + Board connectors: + * Mic Jack + * Line In Jack + * Headphone Jack + * Line Out Jack + * Ext Spk Example: @@ -14,4 +35,8 @@ sound { model = "imx28-evk-sgtl5000"; saif-controllers = <&saif0 &saif1>; audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; }; diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt index 2f5e973285a6..d16d96839bcb 100644 --- a/Documentation/devicetree/bindings/sound/nau8825.txt +++ b/Documentation/devicetree/bindings/sound/nau8825.txt @@ -69,7 +69,7 @@ Optional properties: - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,crosstalk-bypass: make crosstalk function bypass if set. + - nuvoton,crosstalk-enable: make crosstalk function enable if set. - clocks: list of phandle and clock specifier pairs according to common clock bindings for the clocks described in clock-names @@ -98,7 +98,7 @@ Example: nuvoton,short-key-debounce = <2>; nuvoton,jack-insert-debounce = <7>; nuvoton,jack-eject-debounce = <7>; - nuvoton,crosstalk-bypass; + nuvoton,crosstalk-enable; clock-names = "mclk"; clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; diff --git a/Documentation/devicetree/bindings/sound/pcm186x.txt b/Documentation/devicetree/bindings/sound/pcm186x.txt new file mode 100644 index 000000000000..1087f4855980 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/pcm186x.txt @@ -0,0 +1,42 @@ +Texas Instruments PCM186x Universal Audio ADC + +These devices support both I2C and SPI (configured with pin strapping +on the board). + +Required properties: + + - compatible : "ti,pcm1862", + "ti,pcm1863", + "ti,pcm1864", + "ti,pcm1865" + + - reg : The I2C address of the device for I2C, the chip select + number for SPI. + + - avdd-supply: Analog core power supply (3.3v) + - dvdd-supply: Digital core power supply + - iovdd-supply: Digital IO power supply + See regulator/regulator.txt for more information + +CODEC input pins: + * VINL1 + * VINR1 + * VINL2 + * VINR2 + * VINL3 + * VINR3 + * VINL4 + * VINR4 + +The pins can be used in referring sound node's audio-routing property. + +Example: + + pcm186x: audio-codec@4a { + compatible = "ti,pcm1865"; + reg = <0x4a>; + + avdd-supply = <®_3v3_analog>; + dvdd-supply = <®_3v3>; + iovdd-supply = <®_1v8>; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.txt b/Documentation/devicetree/bindings/sound/renesas,fsi.txt index 0d0ab51105b0..0cf0f819b823 100644 --- a/Documentation/devicetree/bindings/sound/renesas,fsi.txt +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sh_fsi2: sh_fsi2@0xec230000 { +sh_fsi2: sh_fsi2@ec230000 { compatible = "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = <0 146 0x4>; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 085bec364caf..5bed9a595772 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -4,7 +4,7 @@ Renesas R-Car sound * Modules ============================================= -Renesas R-Car sound is constructed from below modules +Renesas R-Car and RZ/G sound is constructed from below modules (for Gen2 or later) SCU : Sampling Rate Converter Unit @@ -197,12 +197,17 @@ Ex) [MEM] -> [SRC2] -> [CTU03] -+ sound { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-scu-audio-card"; ... - simple-audio-card,cpu-0 { + simple-audio-card,cpu@0 { + reg = <0>; sound-dai = <&rcar_sound 0>; }; - simple-audio-card,cpu-1 { + simple-audio-card,cpu@1 { + reg = <1>; sound-dai = <&rcar_sound 1>; }; simple-audio-card,codec { @@ -334,9 +339,11 @@ Required properties: - compatible : "renesas,rcar_sound-<soctype>", fallbacks "renesas,rcar_sound-gen1" if generation1, and - "renesas,rcar_sound-gen2" if generation2 + "renesas,rcar_sound-gen2" if generation2 (or RZ/G1) "renesas,rcar_sound-gen3" if generation3 Examples with soctypes are: + - "renesas,rcar_sound-r8a7743" (RZ/G1M) + - "renesas,rcar_sound-r8a7745" (RZ/G1E) - "renesas,rcar_sound-r8a7778" (R-Car M1A) - "renesas,rcar_sound-r8a7779" (R-Car H1) - "renesas,rcar_sound-r8a7790" (R-Car H2) diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt index 0a1dc4e1815c..ec20c1271e92 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -33,7 +33,7 @@ Required properties on RK3288: Example for the rk3188 SPDIF controller: -spdif: spdif@0x1011e000 { +spdif: spdif@1011e000 { compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; reg = <0x1011e000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 929ca6756b02..4f33b0d96afe 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -1,22 +1,27 @@ RT5514 audio CODEC -This device supports I2C only. +This device supports both I2C and SPI. Required properties: - compatible : "realtek,rt5514". -- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI. Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C. -Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C: * DMIC1L * DMIC1R diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index ff381718c517..497bcfc58b71 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -19,6 +19,22 @@ Optional properties: Based on the different PCB layout, add the manual offset value to compensate the DC offset for each L and R channel, and they are different between headphone and headset. +- "realtek,impedance_sensing_num" + The matrix row number of the impedance sensing table. + If the value is 0, it means the impedance sensing is not supported. +- "realtek,impedance_sensing_table" + The matrix rows of the impedance sensing table are consisted by impedance + minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + R channel accordingly. Example is shown as following. + < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 + 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> + The first and second column are defined for the impedance range. If the + detected impedance value is in the range, then the volume value of the + third column will be set to codec. In our codec design, each volume value + should compensate different DC offset to avoid the pop sound, and it is + also different between headphone and headset. In the example, the + "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of + impedance in the impedance sensing function. Pins on the device (for linking into audio routes) for RT5663: diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 09e0e18591ae..bf100cd0d0f7 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -63,7 +63,7 @@ Optional SoC Specific Properties: Example: -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 7a73a9d62015..060cb4a3b47e 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -37,7 +37,7 @@ VDDIO 1.8V 2.5V 3.3V Example: -codec: sgtl5000@0a { +codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index 166f2290233b..17c13e74667d 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -140,6 +140,7 @@ sound { simple-audio-card,name = "Cubox Audio"; simple-audio-card,dai-link@0 { /* I2S - HDMI */ + reg = <0>; format = "i2s"; cpu { sound-dai = <&audio1 0>; @@ -150,6 +151,7 @@ sound { }; simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */ + reg = <1>; cpu { sound-dai = <&audio1 1>; }; @@ -159,6 +161,7 @@ sound { }; simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */ + reg = <2>; cpu { sound-dai = <&audio1 1>; }; diff --git a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt index 40068ec0e9a5..4d51f3f5ea98 100644 --- a/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -51,7 +51,7 @@ Optional properties: Example: - sti_uni_player1: sti-uni-player@0x8D81000 { + sti_uni_player1: sti-uni-player@8d81000 { compatible = "st,stih407-uni-player-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -63,7 +63,7 @@ Example: st,tdm-mode = <1>; }; - sti_uni_player2: sti-uni-player@0x8D82000 { + sti_uni_player2: sti-uni-player@8d82000 { compatible = "st,stih407-uni-player-pcm-out"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -74,7 +74,7 @@ Example: dma-names = "tx"; }; - sti_uni_player3: sti-uni-player@0x8D85000 { + sti_uni_player3: sti-uni-player@8d85000 { compatible = "st,stih407-uni-player-spdif"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; @@ -85,7 +85,7 @@ Example: dma-names = "tx"; }; - sti_uni_reader1: sti-uni-reader@0x8D84000 { + sti_uni_reader1: sti-uni-reader@8d84000 { compatible = "st,stih407-uni-reader-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt new file mode 100644 index 000000000000..864f5b00b031 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt @@ -0,0 +1,63 @@ +STMicroelectronics Audio Digital Filter Sigma Delta modulators(DFSDM) + +The DFSDM allows PDM microphones capture through SPI interface. The Audio +interface is seems as a sub block of the DFSDM device. +For details on DFSDM bindings refer to ../iio/adc/st,stm32-dfsdm-adc.txt + +Required properties: + - compatible: "st,stm32h7-dfsdm-dai". + + - #sound-dai-cells : Must be equal to 0 + + - io-channels : phandle to iio dfsdm instance node. + +Example of a sound card using audio DFSDM node. + + sound_card { + compatible = "audio-graph-card"; + + dais = <&cpu_port>; + }; + + dfsdm: dfsdm@40017000 { + compatible = "st,stm32h7-dfsdm"; + reg = <0x40017000 0x400>; + clocks = <&rcc DFSDM1_CK>; + clock-names = "dfsdm"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + dfsdm_adc0: filter@0 { + compatible = "st,stm32-dfsdm-dmic"; + reg = <0>; + interrupts = <110>; + dmas = <&dmamux1 101 0x400 0x00>; + dma-names = "rx"; + st,adc-channels = <1>; + st,adc-channel-names = "dmic0"; + st,adc-channel-types = "SPI_R"; + st,adc-channel-clk-src = "CLKOUT"; + st,filter-order = <5>; + + dfsdm_dai0: dfsdm-dai { + compatible = "st,stm32h7-dfsdm-dai"; + #sound-dai-cells = <0>; + io-channels = <&dfsdm_adc0 0>; + cpu_port: port { + dfsdm_endpoint: endpoint { + remote-endpoint = <&dmic0_endpoint>; + }; + }; + }; + }; + + dmic0: dmic@0 { + compatible = "dmic-codec"; + #sound-dai-cells = <0>; + port { + dmic0_endpoint: endpoint { + remote-endpoint = <&dfsdm_endpoint>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f1c5ae59e7c9..b1acc1a256ba 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -10,7 +10,10 @@ Required properties: - reg: Base address and size of SAI common register set. - clocks: Must contain phandle and clock specifier pairs for each entry in clock-names. - - clock-names: Must contain "x8k" and "x11k" + - clock-names: Must contain "pclk" "x8k" and "x11k" + "pclk": Clock which feeds the peripheral bus interface. + Mandatory for "st,stm32h7-sai" compatible. + Not used for "st,stm32f4-sai" compatible. "x8k": SAI parent clock for sampling rates multiple of 8kHz. "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - interrupts: cpu DAI interrupt line shared by SAI sub-blocks @@ -36,6 +39,13 @@ SAI subnodes required properties: - pinctrl-names: should contain only value "default" - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt +SAI subnodes Optional properties: + - st,sync: specify synchronization mode. + By default SAI sub-block is in asynchronous mode. + This property sets SAI sub-block as slave of another SAI sub-block. + Must contain the phandle and index of the sai sub-block providing + the synchronization. + The device node should contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in Documentation/devicetree/bindings/ graph.txt. @@ -52,8 +62,8 @@ sai1: sai1@40015800 { #size-cells = <1>; ranges = <0 0x40015800 0x400>; reg = <0x40015800 0x4>; - clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "x8k", "x11k"; + clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; interrupts = <87>; sai1a: audio-controller@40015804 { diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 2d4e10deb6f4..66579bbd3294 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -62,7 +62,7 @@ Required properties for the following compatibles: block in the PRCM. Example: -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; @@ -73,7 +73,7 @@ codec: codec@01c22c00 { dma-names = "rx", "tx"; }; -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-codec"; reg = <0x01c22c00 0x98>; diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index fc5da6080759..b9d50d6cdef3 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -8,6 +8,7 @@ Required properties: - compatible: should be one of the following: - "allwinner,sun4i-a10-i2s" - "allwinner,sun6i-a31-i2s" + - "allwinner,sun8i-a83t-i2s" - "allwinner,sun8i-h3-i2s" - reg: physical base address of the controller and length of memory mapped region. @@ -23,12 +24,13 @@ Required properties: Required properties for the following compatibles: - "allwinner,sun6i-a31-i2s" + - "allwinner,sun8i-a83t-i2s" - "allwinner,sun8i-h3-i2s" - resets: phandle to the reset line for this codec Example: -i2s0: i2s@01c22400 { +i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt index 399b1b4bae22..2ca3d138528e 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt @@ -48,7 +48,7 @@ are similar to A33 using simple-card: sound-dai = <&codec>; }; - soc@01c00000 { + soc@1c00000 { [...] audio-codec@1c22e00 { diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt index 1b6e7c4e50ab..07356758bd91 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt @@ -10,7 +10,7 @@ Required properties if not a sub-node of the PRCM node: - reg: must contain the registers location and length Example: -prcm: prcm@01f01400 { +prcm: prcm@1f01400 { codec_analog: codec-analog { compatible = "allwinner,sun8i-a23-codec-analog"; }; diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 70ee177901d3..0c64a209c2e9 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -31,7 +31,7 @@ Required properties: Example: -spdif: spdif@01c21000 { +spdif: spdif@1c21000 { compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x40>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/sound/tas5720.txt b/Documentation/devicetree/bindings/sound/tas5720.txt index 40d94f82beb3..7481653fe8e3 100644 --- a/Documentation/devicetree/bindings/sound/tas5720.txt +++ b/Documentation/devicetree/bindings/sound/tas5720.txt @@ -6,10 +6,12 @@ audio playback. For more product information please see the links below: http://www.ti.com/product/TAS5720L http://www.ti.com/product/TAS5720M +http://www.ti.com/product/TAS5722L Required properties: -- compatible : "ti,tas5720" +- compatible : "ti,tas5720", + "ti,tas5722" - reg : I2C slave address - dvdd-supply : phandle to a 3.3-V supply for the digital circuitry - pvdd-supply : phandle to a supply used for the Class-D amp and the analog diff --git a/Documentation/devicetree/bindings/sound/tfa9879.txt b/Documentation/devicetree/bindings/sound/tfa9879.txt new file mode 100644 index 000000000000..1620e6848436 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tfa9879.txt @@ -0,0 +1,23 @@ +NXP TFA9879 class-D audio amplifier + +Required properties: + +- compatible : "nxp,tfa9879" + +- reg : the I2C address of the device + +- #sound-dai-cells : must be 0. + +Example: + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + + amp: amp@6c { + #sound-dai-cells = <0>; + compatible = "nxp,tfa9879"; + reg = <0x6c>; + }; +}; + diff --git a/Documentation/devicetree/bindings/sound/ti,tas6424.txt b/Documentation/devicetree/bindings/sound/ti,tas6424.txt new file mode 100644 index 000000000000..1c4ada0eef4e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tas6424.txt @@ -0,0 +1,20 @@ +Texas Instruments TAS6424 Quad-Channel Audio amplifier + +The TAS6424 serial control bus communicates through I2C protocols. + +Required properties: + - compatible: "ti,tas6424" - TAS6424 + - reg: I2C slave address + - sound-dai-cells: must be equal to 0 + +Example: + +tas6424: tas6424@6a { + compatible = "ti,tas6424"; + reg = <0x6a>; + + #sound-dai-cells = <0>; +}; + +For more product information please see the link below: +http://www.ti.com/product/TAS6424-Q1 diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt index 6fbba562eaa7..5b3c33bb99e5 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt @@ -22,7 +22,7 @@ Required properties: Optional properties: -- gpio-reset - gpio pin number used for codec reset +- reset-gpios - GPIO specification for the active low RESET input. - ai31xx-micbias-vg - MicBias Voltage setting 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V @@ -30,6 +30,10 @@ Optional properties: If this node is not mentioned or if the value is unknown, then micbias is set to 2.0V. +Deprecated properties: + +- gpio-reset - gpio pin number used for codec reset + CODEC output pins: * HPL * HPR @@ -48,6 +52,7 @@ CODEC input pins: The pins can be used in referring sound node's audio-routing property. Example: +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/sound/tlv320aic31xx-micbias.h> tlv320aic31xx: tlv320aic31xx@18 { @@ -56,6 +61,8 @@ tlv320aic31xx: tlv320aic31xx@18 { ai31xx-micbias-vg = <MICBIAS_OFF>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + HPVDD-supply = <®ulator>; SPRVDD-supply = <®ulator>; SPLVDD-supply = <®ulator>; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index ba5b45c483f5..9796c4639262 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -17,7 +17,7 @@ Required properties: Optional properties: -- gpio-reset - gpio pin number used for codec reset +- reset-gpios - GPIO specification for the active low RESET input. - ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality - Not supported on tlv320aic3104 - ai3x-micbias-vg - MicBias Voltage required. @@ -34,6 +34,10 @@ Optional properties: - AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the device as covered in Documentation/devicetree/bindings/regulator/regulator.txt +Deprecated properties: + +- gpio-reset - gpio pin number used for codec reset + CODEC output pins: * LLOUT * RLOUT @@ -61,10 +65,14 @@ The pins can be used in referring sound node's audio-routing property. Example: +#include <dt-bindings/gpio/gpio.h> + tlv320aic3x: tlv320aic3x@1b { compatible = "ti,tlv320aic3x"; reg = <0x1b>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + AVDD-supply = <®ulator>; IOVDD-supply = <®ulator>; DRVDD-supply = <®ulator>; diff --git a/Documentation/devicetree/bindings/sound/tscs42xx.txt b/Documentation/devicetree/bindings/sound/tscs42xx.txt new file mode 100644 index 000000000000..2ac2f0996697 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tscs42xx.txt @@ -0,0 +1,16 @@ +TSCS42XX Audio CODEC + +Required Properties: + + - compatible : "tempo,tscs42A1" for analog mic + "tempo,tscs42A2" for digital mic + + - reg : <0x71> for analog mic + <0x69> for digital mic + +Example: + +wookie: codec@69 { + compatible = "tempo,tscs42A2"; + reg = <0x69>; +}; diff --git a/Documentation/devicetree/bindings/sound/uniphier,evea.txt b/Documentation/devicetree/bindings/sound/uniphier,evea.txt new file mode 100644 index 000000000000..3f31b235f18b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/uniphier,evea.txt @@ -0,0 +1,26 @@ +Socionext EVEA - UniPhier SoC internal codec driver + +Required properties: +- compatible : should be "socionext,uniphier-evea". +- reg : offset and length of the register set for the device. +- clock-names : should include following entries: + "evea", "exiv" +- clocks : a list of phandle, should contain an entry for each + entries in clock-names. +- reset-names : should include following entries: + "evea", "exiv", "adamv" +- resets : a list of phandle, should contain reset entries of + reset-names. +- #sound-dai-cells: should be 1. + +Example: + + codec { + compatible = "socionext,uniphier-evea"; + reg = <0x57900000 0x1000>; + clock-names = "evea", "exiv"; + clocks = <&sys_clk 41>, <&sys_clk 42>; + reset-names = "evea", "exiv", "adamv"; + resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>; + #sound-dai-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt new file mode 100644 index 000000000000..e172c62dc2df --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt @@ -0,0 +1,53 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists sound specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + + - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. + If present, values must be specified less than or equal to the number of + input signals. If values less than the number of input signals, elements + that have not been specified are set to 0 by default. Entries are: + <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) + <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. + + - wlf,dmic-ref : DMIC reference voltage source for each input, can be + selected from either MICVDD or one of the MICBIAS's, defines + (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If + present, the number of values should be less than or equal to the + number of inputs, unspecified inputs will use the chip default. + + - wlf,max-channels-clocked : The maximum number of channels to be clocked on + each AIF, useful for I2S systems with multiple data lines being mastered. + Specify one cell for each AIF to be configured, specify zero for AIFs that + should be handled normally. + If present, number of cells must be less than or equal to the number of + AIFs. If less than the number of AIFs, for cells that have not been + specified the corresponding AIFs will be treated as default setting. + + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,out-volume-limit : The volume limit value that should be applied to each + output channel. See the datasheet for exact values. Channels are specified + in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index b5a5ca4502f9..09231d7586b2 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -16,7 +16,7 @@ please check: * dma/dma.txt Example: - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 2c1e6a43930b..e0fa61a1be0c 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -19,7 +19,7 @@ Recommended properties : Example: -spi1: spi@0x4000c400 { /* USART1 */ +spi1: spi@4000c400 { /* USART1 */ #address-cells = <1>; #size-cells = <0>; compatible = "energymicro,efm32-spi"; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 5bf13960f7f4..e3c48b20b1a6 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -12,24 +12,30 @@ Required properties: - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt -- cs-gpios : Specifies the gpio pins to be used for chipselects. - clocks : Clock specifiers for both ipg and per clocks. - clock-names : Clock names should include both "ipg" and "per" See the clock consumer binding, Documentation/devicetree/bindings/clock/clock-bindings.txt -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: DMA request names should include "tx" and "rx" if present. -Obsolete properties: -- fsl,spi-num-chipselects : Contains the number of the chipselect +Recommended properties: +- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip +select lines can be used, they appear to always generate a pulse between each +word of a transfer. Most use cases will require GPIO based chip selects to +generate a valid transaction. Optional properties: +- num-cs : Number of total chip selects, see spi-bus.txt. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, +Documentation/devicetree/bindings/dma/dma.txt. +- dma-names: DMA request names, if present, should include "tx" and "rx". - fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register controlling the SPI_READY handling. Note that to enable the DRCTL consideration, the SPI_READY mode-flag needs to be set too. Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst). +Obsolete properties: +- fsl,spi-num-chipselects : Contains the number of the chipselect + Example: ecspi@70010000 { diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index e865855726a2..80710f0f0448 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -1,7 +1,9 @@ Renesas MSIOF spi controller Required properties: -- compatible : "renesas,msiof-r8a7790" (R-Car H2) +- compatible : "renesas,msiof-r8a7743" (RZ/G1M) + "renesas,msiof-r8a7745" (RZ/G1E) + "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) @@ -10,7 +12,7 @@ Required properties: "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) - "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device) + "renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device) "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device) "renesas,sh-msiof" (deprecated) @@ -34,7 +36,21 @@ Required properties: Optional properties: - clocks : Must contain a reference to the functional clock. -- num-cs : Total number of chip-selects (default is 1) +- num-cs : Total number of chip selects (default is 1). + Up to 3 native chip selects are supported: + 0: MSIOF_SYNC + 1: MSIOF_SS1 + 2: MSIOF_SS2 + Hardware limitations related to chip selects: + - Native chip selects are always deasserted in + between transfers that are part of the same + message. Use cs-gpios to work around this. + - All slaves using native chip selects must use the + same spi-cs-high configuration. Use cs-gpios to + work around this. + - When using GPIO chip selects, at least one native + chip select must be left unused, as it will be + driven anyway. - dmas : Must contain a list of two references to DMA specifiers, one for transmission, and one for reception. diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index f5916c92fe91..9f5b4c7c0c08 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -24,6 +24,16 @@ Required properties: based on a specific SoC configuration. - interrupts: interrupt number mapped to CPU. - clocks: spi clk phandle + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the SPI device id + value. This property is as per the binding, Optional: - cs-gpios: gpio chip selects @@ -58,7 +68,7 @@ SPI_SOMI/SIMO+-----------------+ +----------- Example of a NOR flash slave device (n25q032) connected to DaVinci SPI controller device over the SPI bus. -spi0:spi@20BF0000 { +spi0:spi@20bf0000 { #address-cells = <1>; #size-cells = <0>; compatible = "ti,dm6446-spi"; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 13b1fcc8469e..dcc7eaada511 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -5,6 +5,7 @@ Required properties: "fsl,ls2085a-dspi" or "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" + "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt index 6069b95a883d..ce3230c8e28d 100644 --- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt +++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt @@ -16,7 +16,7 @@ Optional properties: Example: -spi: spi@E100800 { +spi: spi@e100800 { compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; reg = <0xE100800 0x100>; interrupt-parent = <&icu0>; diff --git a/Documentation/devicetree/bindings/spi/spi-meson.txt b/Documentation/devicetree/bindings/spi/spi-meson.txt index 825c39cae74a..b7f5e86fed22 100644 --- a/Documentation/devicetree/bindings/spi/spi-meson.txt +++ b/Documentation/devicetree/bindings/spi/spi-meson.txt @@ -27,7 +27,9 @@ The Meson SPICC is generic SPI controller for general purpose Full-Duplex communications with dedicated 16 words RX/TX PIO FIFOs. Required properties: - - compatible: should be "amlogic,meson-gx-spicc" on Amlogic GX SoCs. + - compatible: should be: + "amlogic,meson-gx-spicc" on Amlogic GX and compatible SoCs. + "amlogic,meson-axg-spicc" on Amlogic AXG and compatible SoCs - reg: physical base address and length of the controller registers - interrupts: The interrupt specifier - clock-names: Must contain "core" diff --git a/Documentation/devicetree/bindings/spi/spi-orion.txt b/Documentation/devicetree/bindings/spi/spi-orion.txt index df8ec31f2f07..8434a65fc12a 100644 --- a/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -18,8 +18,17 @@ Required properties: The eight register sets following the control registers refer to chip-select lines 0 through 7 respectively. - cell-index : Which of multiple SPI controllers is this. +- clocks : pointers to the reference clocks for this device, the first + one is the one used for the clock on the spi bus, the + second one is optional and is the clock used for the + functional part of the controller + Optional properties: - interrupts : Is currently not used. +- clock-names : names of used clocks, mandatory if the second clock is + used, the name must be "core", and "axi" (the latter + is only for Armada 7K/8K). + Example: spi@10600 { diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index 8f4169f63936..3b02b3a7cfb2 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -5,11 +5,14 @@ Required properties: "renesas,rspi-<soctype>", "renesas,rspi" as fallback. For Renesas Serial Peripheral Interface on RZ/A1H: "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback. - For Quad Serial Peripheral Interface on R-Car Gen2: + For Quad Serial Peripheral Interface on R-Car Gen2 and + RZ/G1 devices: "renesas,qspi-<soctype>", "renesas,qspi" as fallback. Examples with soctypes are: - "renesas,rspi-sh7757" (SH) - "renesas,rspi-r7s72100" (RZ/A1H) + - "renesas,qspi-r8a7743" (RZ/G1M) + - "renesas,qspi-r8a7745" (RZ/G1E) - "renesas,qspi-r8a7790" (R-Car H2) - "renesas,qspi-r8a7791" (R-Car M2-W) - "renesas,qspi-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt new file mode 100644 index 000000000000..8de589b376ce --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt @@ -0,0 +1,58 @@ +Spreadtrum ADI controller + +ADI is the abbreviation of Anolog-Digital interface, which is used to access +analog chip (such as PMIC) from digital chip. ADI controller follows the SPI +framework for its hardware implementation is alike to SPI bus and its timing +is compatile to SPI timing. + +ADI controller has 50 channels including 2 software read/write channels and +48 hardware channels to access analog chip. For 2 software read/write channels, +users should set ADI registers to access analog chip. For hardware channels, +we can configure them to allow other hardware components to use it independently, +which means we can just link one analog chip address to one hardware channel, +then users can access the mapped analog chip address by this hardware channel +triggered by hardware components instead of ADI software channels. + +Thus we introduce one property named "sprd,hw-channels" to configure hardware +channels, the first value specifies the hardware channel id which is used to +transfer data triggered by hardware automatically, and the second value specifies +the analog chip address where user want to access by hardware components. + +Since we have multi-subsystems will use unique ADI to access analog chip, when +one system is reading/writing data by ADI software channels, that should be under +one hardware spinlock protection to prevent other systems from reading/writing +data by ADI software channels at the same time, or two parallel routine of setting +ADI registers will make ADI controller registers chaos to lead incorrect results. +Then we need one hardware spinlock to synchronize between the multiple subsystems. + +Required properties: +- compatible: Should be "sprd,sc9860-adi". +- reg: Offset and length of ADI-SPI controller register space. +- hwlocks: Reference to a phandle of a hwlock provider node. +- hwlock-names: Reference to hwlock name strings defined in the same order + as the hwlocks, should be "adi". +- #address-cells: Number of cells required to define a chip select address + on the ADI-SPI bus. Should be set to 1. +- #size-cells: Size of cells required to define a chip select address size + on the ADI-SPI bus. Should be set to 0. + +Optional properties: +- sprd,hw-channels: This is an array of channel values up to 49 channels. + The first value specifies the hardware channel id which is used to + transfer data triggered by hardware automatically, and the second + value specifies the analog chip address where user want to access + by hardware components. + +SPI slave nodes must be children of the SPI controller node and can contain +properties described in Documentation/devicetree/bindings/spi/spi-bus.txt. + +Example: + adi_bus: spi@40030000 { + compatible = "sprd,sc9860-adi"; + reg = <0 0x40030000 0 0x10000>; + hwlocks = <&hwlock1 0>; + hwlock-names = "adi"; + #address-cells = <1>; + #size-cells = <0>; + sprd,hw-channels = <30 0x8c20>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index 484bbff5337e..c75d604a8290 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -12,7 +12,7 @@ Required properties: Example: -spi1: spi@01c06000 { +spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index ab1811354cce..435a8e0731ac 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -19,7 +19,7 @@ Optional properties: Example: -spi1: spi@01c69000 { +spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = <0 66 4>; @@ -28,7 +28,7 @@ spi1: spi@01c69000 { resets = <&ahb1_rst 21>; }; -spi0: spi@01c68000 { +spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt index c7b7856bd528..7bf61efc66c8 100644 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.txt @@ -2,7 +2,7 @@ Xilinx SPI controller Device Tree Bindings ------------------------------------------------- Required properties: -- compatible : Should be "xlnx,xps-spi-2.00.a" or "xlnx,xps-spi-2.00.b" +- compatible : Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a" - reg : Physical base address and size of SPI registers map. - interrupts : Property with a value describing the interrupt number. diff --git a/Documentation/devicetree/bindings/sram/samsung-sram.txt b/Documentation/devicetree/bindings/sram/samsung-sram.txt index 6bc474b2b885..61a9bbed303d 100644 --- a/Documentation/devicetree/bindings/sram/samsung-sram.txt +++ b/Documentation/devicetree/bindings/sram/samsung-sram.txt @@ -19,7 +19,7 @@ found in Documentation/devicetree/bindings/sram/sram.txt Example: - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 6bb92a1df753..d087f04a4d7f 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -47,7 +47,7 @@ This valid values for this argument are: Example ------- -sram-controller@01c00000 { +sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; @@ -68,7 +68,7 @@ sram-controller@01c00000 { }; }; -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; ... diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt index 24aacf8948c5..e0d013a2e66d 100644 --- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt @@ -2,22 +2,35 @@ Required properties: -- compatible: Should be set to one of the following: - marvell,armada370-thermal - marvell,armada375-thermal - marvell,armada380-thermal - marvell,armadaxp-thermal +- compatible: Should be set to one of the following: + * marvell,armada370-thermal + * marvell,armada375-thermal + * marvell,armada380-thermal + * marvell,armadaxp-thermal + * marvell,armada-ap806-thermal + * marvell,armada-cp110-thermal -- reg: Device's register space. - Two entries are expected, see the examples below. - The first one is required for the sensor register; - the second one is required for the control register - to be used for sensor initialization (a.k.a. calibration). +- reg: Device's register space. + Two entries are expected, see the examples below. The first one points + to the status register (4B). The second one points to the control + registers (8B). + Note: The compatibles marvell,armada370-thermal, + marvell,armada380-thermal, and marvell,armadaxp-thermal must point to + "control MSB/control 1", with size of 4 (deprecated binding), or point + to "control LSB/control 0" with size of 8 (current binding). All other + compatibles must point to "control LSB/control 0" with size of 8. -Example: +Examples: + /* Legacy bindings */ thermal@d0018300 { compatible = "marvell,armada370-thermal"; - reg = <0xd0018300 0x4 + reg = <0xd0018300 0x4 0xd0018304 0x4>; }; + + ap_thermal: thermal@6f8084 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x6f808C 0x4>, + <0x6f8084 0x8>; + }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt new file mode 100644 index 000000000000..9d43553a8d39 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt @@ -0,0 +1,20 @@ +* Broadcom STB thermal management + +Thermal management core, provided by the AVS TMON hardware block. + +Required properties: +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445" +- reg: address range for the AVS TMON registers +- interrupts: temperature monitor interrupt, for high/low threshold triggers +- interrupt-names: should be "tmon" +- interrupt-parent: the parent interrupt controller + +Example: + + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + }; diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 9b4c7b017495..1b596fd38dc4 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -70,7 +70,7 @@ Following properties are mandatory (depending on SoC): Example 1): - tmu@100C0000 { + tmu@100c0000 { compatible = "samsung,exynos4412-tmu"; interrupt-parent = <&combiner>; reg = <0x100C0000 0x100>; diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index d48fc5280d5a..cef716a236f1 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -13,6 +13,7 @@ Example : +for Hi6220: tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; @@ -21,3 +22,11 @@ Example : clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; } + +for Hi3660: + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 3c67bd50aa10..379eb763073e 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -7,15 +7,47 @@ Required properties: is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. +- nvmem-cells: A phandle to the calibration cells provided by ocotp. +- nvmem-cell-names: Should be "calib", "temp_grade". + +Deprecated properties: - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips +because it does not handle OCOTP clock requirements. + Optional properties: - clocks : thermal sensor's clock source. Example: +ocotp: ocotp@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; +}; + +tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; +}; +Legacy method (Deprecated): tempmon { compatible = "fsl,imx6q-tempmon"; fsl,tempmon = <&anatop>; diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt new file mode 100644 index 000000000000..276387dd6815 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra186 BPMP thermal sensor + +In Tegra186, the BPMP (Boot and Power Management Processor) implements an +interface that is used to read system temperatures, including CPU cluster +and GPU temperatures. This binding describes the thermal sensor that is +exposed by BPMP. + +The BPMP thermal node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents a thermal sensor. See thermal.txt for details of the +core thermal binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-thermal". +- #thermal-sensor-cells: Cell for sensor index. + Single-cell integer. + Must be <1>. + +Example: + +bpmp { + ... + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index a8e52c8ccfcc..349e635f2d87 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -6,6 +6,7 @@ Required properties: "renesas,rcar-thermal" (without thermal-zone) as fallback. Examples with soctypes are: - "renesas,thermal-r8a73a4" (R-Mobile APE6) + - "renesas,thermal-r8a7743" (RZ/G1M) - "renesas,thermal-r8a7779" (R-Car H1) - "renesas,thermal-r8a7790" (R-Car H2) - "renesas,thermal-r8a7791" (R-Car M2-W) diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index e3a6234fb1ac..43d744e5305e 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -2,6 +2,7 @@ Required properties: - compatible : should be "rockchip,<name>-tsadc" + "rockchip,rv1108-tsadc": found on RV1108 SoCs "rockchip,rk3228-tsadc": found on RK3228 SoCs "rockchip,rk3288-tsadc": found on RK3288 SoCs "rockchip,rk3328-tsadc": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 88b6ea1ad290..1719d47a5e2f 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -239,7 +239,7 @@ cpus { * A simple fan controller which supports 10 speeds of operation * (represented as 0-9). */ - fan0: fan@0x48 { + fan0: fan@48 { ... cooling-min-level = <0>; cooling-max-level = <9>; @@ -252,7 +252,7 @@ ocp { /* * A simple IC with a single bandgap temperature sensor. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ed00 { ... #thermal-sensor-cells = <0>; }; @@ -330,7 +330,7 @@ ocp { /* * A simple IC with several bandgap temperature sensors. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ed00 { ... #thermal-sensor-cells = <1>; }; @@ -447,7 +447,7 @@ one thermal zone. /* * A simple IC with a single temperature sensor. */ - adc: sensor@0x49 { + adc: sensor@49 { ... #thermal-sensor-cells = <0>; }; @@ -458,7 +458,7 @@ ocp { /* * A simple IC with a single bandgap temperature sensor. */ - bandgap0: bandgap@0x0000ED00 { + bandgap0: bandgap@0000ed00 { ... #thermal-sensor-cells = <0>; }; @@ -516,7 +516,7 @@ with many sensors and many cooling devices. /* * An IC with several temperature sensor. */ - adc_dummy: sensor@0x50 { + adc_dummy: sensor@50 { ... #thermal-sensor-cells = <1>; /* sensor internal ID */ }; diff --git a/Documentation/devicetree/bindings/timer/actions,owl-timer.txt b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt index e3c28da80cb2..977054f87563 100644 --- a/Documentation/devicetree/bindings/timer/actions,owl-timer.txt +++ b/Documentation/devicetree/bindings/timer/actions,owl-timer.txt @@ -2,6 +2,7 @@ Actions Semi Owl Timer Required properties: - compatible : "actions,s500-timer" for S500 + "actions,s700-timer" for S700 "actions,s900-timer" for S900 - reg : Offset and length of the register set for the device. - interrupts : Should contain the interrupts. diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt index 8d6e4fd2468e..2c5c1be78360 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -14,7 +14,7 @@ Optional properties: Example: -timer@01c60000 { +timer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <0 51 1>, diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index 6ca6b9e582a0..d740989eb569 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -20,16 +20,16 @@ Required Properties: (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. - - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4. - - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4. - - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790. - - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790. - - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791. - - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791. - - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793. - - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793. - - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794. - - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794. + - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. + - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. + - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. + - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. + - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791. + - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793. + - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. + - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. + - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. @@ -46,7 +46,7 @@ Required Properties: Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes cmt0: timer@ffca0000 { - compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0"; + compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, <0 142 IRQ_TYPE_LEVEL_HIGH>; @@ -55,7 +55,7 @@ Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes }; cmt1: timer@e6130000 { - compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1"; + compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, <0 121 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/timer/renesas,tpu.txt b/Documentation/devicetree/bindings/timer/renesas,tpu.txt index f8b25897fb31..1d46f9de4feb 100644 --- a/Documentation/devicetree/bindings/timer/renesas,tpu.txt +++ b/Documentation/devicetree/bindings/timer/renesas,tpu.txt @@ -1,4 +1,4 @@ -* Renesas H8/300 Timer Pluse Unit +* Renesas H8/300 Timer Pulse Unit The TPU is a 16bit timer/counter with configurable clock inputs and programmable compare match. diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index 167d5dab9f64..8f78640ad64c 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -51,7 +51,7 @@ Example 2: In this example, the timer interrupts are connected to two separate interrupt controllers. Hence, an interrupt-map is created to map the interrupts to the respective interrupt controllers. - mct@101C0000 { + mct@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-parent = <&mct_map>; diff --git a/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt b/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt new file mode 100644 index 000000000000..6d97e7d0f6e8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/spreadtrum,sprd-timer.txt @@ -0,0 +1,20 @@ +Spreadtrum timers + +The Spreadtrum SC9860 platform provides 3 general-purpose timers. +These timers can support 32bit or 64bit counter, as well as supporting +period mode or one-shot mode, and they are can be wakeup source +during deep sleep. + +Required properties: +- compatible: should be "sprd,sc9860-timer" for SC9860 platform. +- reg: The register address of the timer device. +- interrupts: Should contain the interrupt for the timer device. +- clocks: The phandle to the source clock (usually a 32.768 KHz fixed clock). + +Example: + timer@40050000 { + compatible = "sprd,sc9860-timer"; + reg = <0 0x40050000 0 0x20>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_32k>; + }; diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index af284fbd4d23..2e3740f98c41 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -36,11 +36,9 @@ atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor capella,cm3232 CM3232: Ambient Light Sensor cirrus,cs42l51 Cirrus Logic CS42L51 audio codec -dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock -dallas,ds1338 I2C RTC with 56-Byte NV RAM -dallas,ds1340 I2C RTC with Trickle Charger dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1631 High-Precision Digital Thermometer +dallas,ds1672 Dallas DS1672 Real-time Clock dallas,ds1682 Total-Elapsed-Time Recorder with Alarm dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM @@ -54,10 +52,9 @@ dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer domintech,dmard10 DMARD10: 3-axis Accelerometer epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +emmicro,em3027 EM Microelectronic EM3027 Real-time Clock fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer -fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor @@ -66,13 +63,16 @@ fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) +infineon,tlv493d-a1b6 Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM +isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM +isil,isl12022 Intersil ISL12022 Real-time Clock isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs +maxim,max6621 PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -mc,rv3029c2 Real Time Clock Module with I2C-Bus mcube,mc3230 mCube 3-axis 8-bit digital accelerometer memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) @@ -141,6 +141,7 @@ microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection +microcrystal,rv3029 Real Time Clock Module with I2C-Bus miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer @@ -151,10 +152,12 @@ national,lm85 Temperature sensor with integrated fan control national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface nuvoton,npct501 i2c trusted platform module (TPM) nuvoton,npct601 i2c trusted platform module (TPM2) +nuvoton,w83773g Nuvoton Temperature Sensor nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock +nxp,pcf8523 Real-time Clock nxp,pcf8563 Real-time clock/calendar nxp,pcf85063 Tiny Real-Time Clock oki,ml86v7667 OKI ML86V7667 video decoder @@ -174,10 +177,6 @@ sii,s35390a 2-wire CMOS real-time clock silabs,si7020 Relative Humidity and Temperature Sensors skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st,24c256 i2c serial eeprom (24cxx) -st,m41t0 Serial real-time clock (RTC) -st,m41t00 Serial real-time clock (RTC) -st,m41t62 Serial real-time clock (RTC) with alarm -st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt index 1f69ee1a61ea..21d9a93db2e9 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -32,7 +32,7 @@ Optional properties: Example: - ufsphy1: ufsphy@0xfc597000 { + ufsphy1: ufsphy@fc597000 { compatible = "qcom,ufs-phy-qmp-20nm"; reg = <0xfc597000 0x800>; reg-names = "phy_mem"; @@ -53,7 +53,7 @@ Example: <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; }; - ufshc@0xfc598000 { + ufshc@fc598000 { ... phys = <&ufsphy1>; phy-names = "ufsphy"; diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index a99ed5565b26..c39dfef76a18 100644 --- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -46,7 +46,7 @@ Note: If above properties are not defined it can be assumed that the supply regulators or clocks are always on. Example: - ufshc@0xfc598000 { + ufshc@fc598000 { compatible = "jedec,ufs-1.1"; reg = <0xfc598000 0x800>; interrupts = <0 28 0>; diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index cb2bd83fa89a..50abb20fe319 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -16,7 +16,7 @@ Required properties: Example: - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ahb_gates 0>; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 16920d78e1b8..7a198a30408a 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -95,6 +95,7 @@ usb: usb@47400000 { reg = <0x47401300 0x100>; reg-names = "phy"; ti,ctrl_mod = <&ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -141,6 +142,7 @@ usb: usb@47400000 { reg = <0x47401b00 0x100>; reg-names = "phy"; ti,ctrl_mod = <&ctrl_mod>; + #phy-cells = <0>; }; usb1: usb@47401800 { @@ -181,7 +183,7 @@ usb: usb@47400000 { "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@7402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index ad8ea56a9ed3..44e80153b148 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -18,7 +18,7 @@ Required properties: - atmel,oc-gpio: If present, specifies a gpio that needs to be activated for the overcurrent detection. -usb0: ohci@00500000 { +usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; @@ -39,7 +39,7 @@ Required properties: "ehci_clk" for the peripheral clock "usb_clk" for the UTMI clock -usb1: ehci@00800000 { +usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index fcf199b64d3d..e64d903bcbe8 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,6 +19,8 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; + - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt - clocks: clock provider specifier diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 52fb41046b34..44e8bab159ad 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -47,6 +47,8 @@ Optional properties: from P0 to P1/P2/P3 without delay. - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check during HS transmit. + - snps,dis_metastability_quirk: when set, disable metastability workaround. + CAUTION: use only if you are absolutely sure of it. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt index 9feea6c3e4d9..065c91d955ad 100644 --- a/Documentation/devicetree/bindings/usb/ehci-st.txt +++ b/Documentation/devicetree/bindings/usb/ehci-st.txt @@ -22,7 +22,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt Example: - ehci1: usb@0xfe203e00 { + ehci1: usb@fe203e00 { compatible = "st,st-ehci-300x"; reg = <0xfe203e00 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt new file mode 100644 index 000000000000..8cdbe0c85188 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt @@ -0,0 +1,26 @@ +Maxim Integrated SPI-based USB 2.0 host controller MAX3421E + +Required properties: + - compatible: Should be "maxim,max3421" + - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz. + - reg: chip select number to which this device is connected. + - maxim,vbus-en-pin: <GPOUTx ACTIVE_LEVEL> + GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus. + ACTIVE_LEVEL is 0 or 1. + - interrupts: the interrupt line description for the interrupt controller. + The driver configures MAX3421E for active low level triggered interrupts, + configure your interrupt line accordingly. + +Optional property: + - interrupt-parent: the phandle to the associated interrupt controller. + +Example: + + usb@0 { + compatible = "maxim,max3421"; + reg = <0>; + maxim,vbus-en-pin = <3 1>; + spi-max-frequency = <26000000>; + interrupt-parent = <&PIC>; + interrupts = <42>; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 5611a2e4ddf0..88d9f4a4b280 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -26,23 +26,31 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - clock-names : must contain - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC - "wakeup_deb_p0": for USB wakeup debounce clock of port0 - "wakeup_deb_p1": for USB wakeup debounce clock of port1 + "sys_ck": controller clock used by normal mode, + the following ones are optional: + "ref_ck": reference clock used by low power mode etc, + "mcu_ck": mcu_bus clock for register access, + "dma_ck": dma_bus clock for data transfer by DMA - phys : a list of phandle + phy specifier pairs Optional properties: - - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup - mode; - - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup - control register, it depends on "mediatek,wakeup-src". + - wakeup-source : enable USB remote wakeup; + - mediatek,syscon-wakeup : phandle to syscon used to access the register + of the USB wakeup glue layer between xHCI and SPM; it depends on + "wakeup-source", and has two arguments: + - the first one : register base address of the glue layer in syscon; + - the second one : hardware version of the glue layer + - 1 : used by mt8173 etc + - 2 : used by mt2712 etc + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; - vbus-supply : reference to the VBUS regulator; - usb3-lpm-capable : supports USB3.0 LPM - pinctrl-names : a pinctrl state named "default" must be defined - pinctrl-0 : pin control group See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + - imod-interval-ns: default interrupt moderation interval is 5000ns Example: usb30: usb@11270000 { @@ -55,16 +63,15 @@ usb30: usb@11270000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; vusb33-supply = <&mt6397_vusb_reg>; vbus-supply = <&usb_p1_vbus>; usb3-lpm-capable; - mediatek,syscon-wakeup = <&pericfg>; - mediatek,wakeup-src = <1>; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + wakeup-source; + imod-interval-ns = <10000>; }; 2nd: dual-role mode with xHCI driver @@ -89,9 +96,8 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must be - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC + - clock-names : must contain "sys_ck", and the following ones are optional: + "ref_ck", "mcu_ck" and "dma_ck" Optional properties: - vbus-supply : reference to the VBUS regulator; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 49f54767cd21..d589a1ef96a1 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -14,9 +14,9 @@ Required properties: - vusb33-supply : regulator of USB avdd3.3v - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller; - "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are - depends on "mediatek,enable-wakeup" + - clock-names : must contain "sys_ck" for clock of controller, + the following clocks are optional: + "ref_ck", "mcu_ck" and "dam_ck"; - phys : a list of phandle + phy specifier pairs - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -30,9 +30,10 @@ Optional properties: when supports dual-role mode. - vbus-supply : reference to the VBUS regulator, needed when supports dual-role mode. - - pinctl-names : a pinctrl state named "default" must be defined, - "id_float" and "id_ground" are optinal which depends on - "mediatek,enable-manual-drd" + - pinctrl-names : a pinctrl state named "default" is optional, and need be + defined if auto drd switch is enabled, that means the property dr_mode + is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" + is not set. - pinctrl-0 : pin control group See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -41,9 +42,16 @@ Optional properties: - enable-manual-drd : supports manual dual-role switch via debugfs; usually used when receptacle is TYPE-A and also wants to support dual-role mode. - - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode - - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup - control register, it depends on "mediatek,enable-wakeup". + - wakeup-source: enable USB remote wakeup of host mode. + - mediatek,syscon-wakeup : phandle to syscon used to access the register + of the USB wakeup glue layer between SSUSB and SPM; it depends on + "wakeup-source", and has two arguments: + - the first one : register base address of the glue layer in syscon; + - the second one : hardware version of the glue layer + - 1 : used by mt8173 etc + - 2 : used by mt2712 etc + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example @@ -63,15 +71,13 @@ ssusb: usb@11271000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; vbus-supply = <&usb_p0_vbus>; extcon = <&extcon_usb>; dr_mode = "otg"; - mediatek,enable-wakeup; - mediatek,syscon-wakeup = <&pericfg>; + wakeup-source; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; #address-cells = <2>; #size-cells = <2>; ranges; diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt index 2dc8f67eda39..24a826d5015e 100644 --- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ohci: usb@0225000 { +ohci: usb@225000 { compatible = "ti,da830-ohci"; reg = <0x225000 0x1000>; interrupts = <59>; diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt index d893ec9131c3..44c998c16f85 100644 --- a/Documentation/devicetree/bindings/usb/ohci-st.txt +++ b/Documentation/devicetree/bindings/usb/ohci-st.txt @@ -20,7 +20,7 @@ See: Documentation/devicetree/bindings/reset/reset.txt Example: - ohci0: usb@0xfe1ffc00 { + ohci0: usb@fe1ffc00 { compatible = "st,st-ohci-300x"; reg = <0xfe1ffc00 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index e28025883b79..87a45e2f9b7f 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -15,6 +15,10 @@ Required properties: - interrupts: Interrupt specifier for the USB3.0 Peripheral - clocks: clock phandle and specifier pair +Optional properties: + - phys: phandle + phy specifier pair + - phy-names: must be "usb" + Example of R-Car H3 ES1.x: usb3_peri0: usb@ee020000 { compatible = "renesas,r8a7795-usb3-peri", diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 9e18e000339e..d060172f1529 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -3,6 +3,8 @@ Renesas Electronics USBHS driver Required properties: - compatible: Must contain one or more of the following: + - "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device + - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device @@ -10,8 +12,11 @@ Required properties: - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device - - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device + - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device + - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device + - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device + - "renesas,rza1-usbhs" for RZ/A1 compatible device When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index ce02cebac26a..036be172b1ae 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -4,24 +4,99 @@ Usually, we only use device tree for hard wired USB device. The reference binding doc is from: http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps -Required properties: -- compatible: usbVID,PID. The textual representation of VID, PID shall - be in lower case hexadecimal with leading zeroes suppressed. The - other compatible strings from the above standard binding could also - be used, but a device adhering to this binding may leave out all except - for usbVID,PID. -- reg: the port number which this device is connecting to, the range - is 1-31. +Four types of device-tree nodes are defined: "host-controller nodes" +representing USB host controllers, "device nodes" representing USB devices, +"interface nodes" representing USB interfaces and "combined nodes" +representing simple USB devices. + +A combined node shall be used instead of a device node and an interface node +for devices of class 0 or 9 (hub) with a single configuration and a single +interface. + +A "hub node" is a combined node or an interface node that represents a USB +hub. + + +Required properties for device nodes: +- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case hexadecimal + with leading zeroes suppressed. The other compatible strings from the above + standard binding could also be used, but a device adhering to this binding + may leave out all except for "usbVID,PID". +- reg: the number of the USB hub port or the USB host-controller port to which + this device is attached. The range is 1-255. + + +Required properties for device nodes with interface nodes: +- #address-cells: shall be 2 +- #size-cells: shall be 0 + + +Required properties for interface nodes: +- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is + the product id, CN is the configuration value and IN is the interface + number. The textual representation of VID, PID, CN and IN shall be in lower + case hexadecimal with leading zeroes suppressed. The other compatible + strings from the above standard binding could also be used, but a device + adhering to this binding may leave out all except for + "usbifVID,PID.configCN.IN". +- reg: the interface number and configuration value + +The configuration component is not included in the textual representation of +an interface-node unit address for configuration 1. + + +Required properties for combined nodes: +- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case hexadecimal + with leading zeroes suppressed. The other compatible strings from the above + standard binding could also be used, but a device adhering to this binding + may leave out all except for "usbVID,PID". +- reg: the number of the USB hub port or the USB host-controller port to which + this device is attached. The range is 1-255. -Example: -&usb1 { +Required properties for hub nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +Required properties for host-controller nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + + +Example: + +&usb1 { /* host controller */ #address-cells = <1>; #size-cells = <0>; - hub: genesys@1 { + hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; }; -} + + device@2 { /* device connected to port 2 */ + compatible = "usb123,4567"; + reg = <2>; + }; + + device@3 { /* device connected to port 3 */ + compatible = "usb123,abcd"; + reg = <3>; + + #address-cells = <2>; + #size-cells = <0>; + + interface@0 { /* interface 0 of configuration 1 */ + compatible = "usbif123,abcd.config1.0"; + reg = <0 1>; + }; + + interface@0,2 { /* interface 0 of configuration 2 */ + compatible = "usbif123,abcd.config2.0"; + reg = <0 2>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index a12d6012a40f..3efde12b5d68 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -30,7 +30,7 @@ Example (Sequoia 440EPx): }; Example (Allwinner sun4i A10 SoC): - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt index 5be01c859b7a..4dc6a8ee3071 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt @@ -2,6 +2,7 @@ USB NOP PHY Required properties: - compatible: should be usb-nop-xceiv +- #phy-cells: Must be 0 Optional properties: - clocks: phandle to the PHY clock. Use as per Documentation/devicetree @@ -33,6 +34,7 @@ Example: reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; vbus-regulator = <&vbus_regulator>; + #phy-cells = <0>; }; hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index e8766b08c93b..09e70c875bc6 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 2d80b60eeabe..e2ea59bbca93 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -7,12 +7,14 @@ Required properties: - "marvell,armada3700-xhci" for Armada 37xx SoCs - "marvell,armada-375-xhci" for Armada 375 SoCs - "marvell,armada-380-xhci" for Armada 38x SoCs + - "renesas,xhci-r8a7743" for r8a7743 SoC - "renesas,xhci-r8a7790" for r8a7790 SoC - "renesas,xhci-r8a7791" for r8a7791 SoC - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC - "renesas,xhci-r8a7796" for r8a7796 SoC - - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device + - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible + device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device - "xhci-platform" (deprecated) @@ -26,8 +28,10 @@ Required properties: Optional properties: - clocks: reference to a clock + - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism + - imod-interval-ns: default interrupt moderation interval is 5000ns Example: usb@f0931000 { diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 3957d4edaa74..168ff819e827 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -1,16 +1,17 @@ Microchip USB 2.0 Hi-Speed Hub Controller -The device node for the configuration of a Microchip USB251xB/xBi USB 2.0 +The device node for the configuration of a Microchip USB251x/xBi USB 2.0 Hi-Speed Controller. Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", - "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - reset-gpios : Should specify the gpio for hub reset + "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", + "microchip,usb2517", "microchip,usb2517i" - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : + - reset-gpios : Should specify the gpio for hub reset - skip-config : Skip Hub configuration, but only send the USB-Attach command - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - product-id : Set USB Product ID of the hub (16 bit, default depends on type) @@ -19,29 +20,47 @@ Optional properties : - manufacturer : Set USB Manufacturer string (max 31 characters long) - product : Set USB Product string (max 31 characters long) - serial : Set USB Serial string (max 31 characters long) - - {bus,self}-powered : selects between self- and bus-powered operation (default - is self-powered) - - disable-hi-speed : disable USB Hi-Speed support + - {bus,self}-powered : selects between self- and bus-powered operation + (boolean, default is self-powered) + - disable-hi-speed : disable USB Hi-Speed support (boolean) - {multi,single}-tt : selects between multi- and single-transaction-translator - (default is multi-tt) - - disable-eop : disable End of Packet generation in full-speed mode + (boolean, default is multi-tt) + - disable-eop : disable End of Packet generation in full-speed mode (boolean) - {ganged,individual}-sensing : select over-current sense type in self-powered - mode (default is individual) + mode (boolean, default is individual) - {ganged,individual}-port-switching : select port power switching mode - (default is individual) + (boolean, default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered - operation if the local power source is removed or unavailable + operation if the local power source is removed or unavailable (boolean) - oc-delay-us : Delay time (in microseconds) for filtering the over-current sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If an invalid value is given, the default is used instead. - - compound-device : indicate the hub is part of a compound device - - port-mapping-mode : enable port mapping mode + - compound-device : indicate the hub is part of a compound device (boolean) + - port-mapping-mode : enable port mapping mode (boolean) + - led-{usb,speed}-mode : led usb/speed indication mode selection + (boolean, default is speed mode) - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) - non-removable-ports : Should specify the ports which have a non-removable device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled + - sp-max-total-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry including a permanently + attached peripheral (range: 0 - 100000 uA, default 1000 uA) + - bp-max-total-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry including a permanently + attached peripheral (range: 0 - 510000 uA, default 100000 uA) + - sp-max-removable-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry excluding a permanently + attached peripheral (range: 0 - 100000 uA, default 1000 uA) + - bp-max-removable-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry excluding a permanently + attached peripheral (range: 0 - 510000 uA, default 100000 uA) - power-on-time-ms : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). @@ -56,7 +75,6 @@ Examples: usb2514b@2c { compatible = "microchip,usb2514b"; reg = <0x2c>; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; vendor-id = /bits/ 16 <0x0000>; product-id = /bits/ 16 <0x0000>; string-support; diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index c1a0a9191d26..057dd384d473 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -26,7 +26,7 @@ Optional properties: clock frequencies table is used) Examples: - usb3503@08 { + usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; connect-gpios = <&gpx3 0 1>; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index f1e27faf528e..a85a631ec434 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -10,7 +10,7 @@ Required properties: - reg: Should contain registers location and length Examples: -usbmisc@02184800 { +usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 138895e99508..ae850d6c0ad3 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -15,9 +15,11 @@ adi Analog Devices, Inc. advantech Advantech Corporation aeroflexgaisler Aeroflex Gaisler AB al Annapurna Labs +allo Allo.com allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. +amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. @@ -83,6 +85,7 @@ davicom DAVICOM Semiconductor, Inc. delta Delta Electronics, Inc. denx Denx Software Engineering devantech Devantech, Ltd. +dh DH electronics GmbH digi Digi International Inc. digilent Diglent, Inc. dioo Dioo Microcircuit Co., Ltd @@ -95,6 +98,7 @@ dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB ebv EBV Elektronik +eckelmann Eckelmann AG edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. @@ -113,6 +117,7 @@ everspin Everspin Technologies, Inc. exar Exar Corporation excito Excito ezchip EZchip Semiconductor +fairphone Fairphone B.V. faraday Faraday Technology Corporation fcs Fairchild Semiconductor firefly Firefly @@ -120,6 +125,7 @@ focaltech FocalTech Systems Co.,Ltd friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd fsl Freescale Semiconductor fujitsu Fujitsu Ltd. +gcw Game Consoles Worldwide ge General Electric Company geekbuying GeekBuying gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. @@ -151,6 +157,7 @@ i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. ifi Ingenieurburo Fur Ic-Technologie (I/F/I) +ilitek ILI Technology Corporation (ILITEK) img Imagination Technologies Ltd. infineon Infineon Technologies inforce Inforce Computing @@ -169,6 +176,7 @@ itead ITEAD Intelligent Systems Co.Ltd iwave iWave Systems Technologies Pvt. Ltd. jdi Japan Display Inc. jedec JEDEC Solid State Technology Association +jianda Jiandangjing Technology Co., Ltd. karo Ka-Ro electronics GmbH keithkoep Keith & Koep GmbH keymile Keymile GmbH @@ -198,6 +206,7 @@ mcube mCube meas Measurement Specialties mediatek MediaTek Inc. megachips MegaChips +mele Shenzhen MeLE Digital Technology Ltd. melexis Melexis N.V. melfas MELFAS Inc. mellanox Mellanox Technologies @@ -230,12 +239,14 @@ netlogic Broadcom Corporation (formerly NetLogic Microsystems) netron-dy Netron DY netxeon Shenzhen Netxeon Technology CO., LTD nexbox Nexbox +nextthing Next Thing Co. newhaven Newhaven Display International ni National Instruments nintendo Nintendo nlt NLT Technologies, Ltd. nokia Nokia nordic Nordic Semiconductor +nutsboard NutsBoard nuvoton Nuvoton Technology Corporation nvd New Vision Display nvidia NVIDIA @@ -246,9 +257,12 @@ olimex OLIMEX Ltd. onion Onion Corporation onnn ON Semiconductor Corp. ontat On Tat Industrial Company +opalkelly Opal Kelly Incorporated opencores OpenCores.org +openrisc OpenRISC.io option Option NV ORCL Oracle Corporation +orisetech Orise Technology ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. @@ -264,6 +278,7 @@ plathome Plat'Home Co., Ltd. plda PLDA poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) +probox2 PROBOX2 (by W2COMP Co., Ltd.) pulsedlight PulsedLight, Inc qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc @@ -295,8 +310,10 @@ seagate Seagate Technology PLC semtech Semtech Corporation sensirion Sensirion AG sff Small Form Factor Committee +sgd Solomon Goldentek Display Corporation sgx SGX Sensortech sharp Sharp Corporation +shimafuji Shimafuji Electric, Inc. si-en Si-En Technology Ltd. sigma Sigma Designs, Inc. sii Seiko Instruments, Inc. @@ -318,6 +335,7 @@ solomon Solomon Systech Limited sony Sony Corporation spansion Spansion Inc. sprd Spreadtrum Communications Inc. +sst Silicon Storage Technology, Inc. st STMicroelectronics starry Starry Electronic Technology (ShenZhen) Co., LTD startek Startek @@ -330,15 +348,18 @@ swir Sierra Wireless syna Synaptics Inc. synology Synology, Inc. tbs TBS Technologies +tbs-biometrics Touchless Biometric Systems AG tcg Trusted Computing Group tcl Toby Churchill Ltd. technexion TechNexion technologic Technologic Systems +tempo Tempo Semiconductor terasic Terasic Inc. thine THine Electronics, Inc. ti Texas Instruments tianma Tianma Micro-electronics Co., Ltd. tlm Trusted Logic Mobility +tmt Tecon Microprocessor Technologies, LLC. topeet Topeet toradex Toradex AG toshiba Toshiba Corporation @@ -352,6 +373,7 @@ truly Truly Semiconductors Limited tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics +ubnt Ubiquiti Networks udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. @@ -364,6 +386,7 @@ virtio Virtual I/O Device Specification, developed by the OASIS consortium vivante Vivante Corporation vocore VoCore Studio voipac Voipac Technologies s.r.o. +vot Vision Optical Technology Co., Ltd. wd Western Digital Corp. wetek WeTek Electronics, limited. wexler Wexler diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt deleted file mode 100644 index bc4b865d178b..000000000000 --- a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt +++ /dev/null @@ -1,17 +0,0 @@ -Cortina Systems Gemini SoC Watchdog - -Required properties: -- compatible : must be "cortina,gemini-watchdog" -- reg : shall contain base register location and length -- interrupts : shall contain the interrupt for the watchdog - -Optional properties: -- timeout-sec : the default watchdog timeout in seconds. - -Example: - -watchdog@41000000 { - compatible = "cortina,gemini-watchdog"; - reg = <0x41000000 0x1000>; - interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; -}; diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt index bc4b865d178b..9ecdb502e605 100644 --- a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt +++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt @@ -1,7 +1,12 @@ -Cortina Systems Gemini SoC Watchdog +Faraday Technology FTWDT010 watchdog + +This is an IP part from Faraday Technology found in the Gemini +SoCs and others. Required properties: -- compatible : must be "cortina,gemini-watchdog" +- compatible : must be one of + "faraday,ftwdt010" + "cortina,gemini-watchdog", "faraday,ftwdt010" - reg : shall contain base register location and length - interrupts : shall contain the interrupt for the watchdog @@ -11,7 +16,7 @@ Optional properties: Example: watchdog@41000000 { - compatible = "cortina,gemini-watchdog"; + compatible = "faraday,ftwdt010"; reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt index e27763ef0049..cb44918f01a8 100644 --- a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt @@ -1,12 +1,12 @@ -Ingenic Watchdog Timer (WDT) Controller for JZ4740 +Ingenic Watchdog Timer (WDT) Controller for JZ4740 & JZ4780 Required properties: -compatible: "ingenic,jz4740-watchdog" +compatible: "ingenic,jz4740-watchdog" or "ingenic,jz4780-watchdog" reg: Register address and length for watchdog registers Example: -watchdog: jz4740-watchdog@0x10002000 { +watchdog: jz4740-watchdog@10002000 { compatible = "ingenic,jz4740-watchdog"; reg = <0x10002000 0x100>; }; diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 235de0683bb6..5b38a30e608c 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -13,7 +13,7 @@ Required properties: Example: -wdt: watchdog@010000000 { +wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; }; diff --git a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt index 556d06c17c92..4b76bec62af9 100644 --- a/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/pnx4008-wdt.txt @@ -10,7 +10,7 @@ Optional properties: Example: - watchdog@4003C000 { + watchdog@4003c000 { compatible = "nxp,pnx4008-wdt"; reg = <0x4003C000 0x1000>; timeout-sec = <10>; diff --git a/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt new file mode 100644 index 000000000000..05653054bd5b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt @@ -0,0 +1,17 @@ +Realtek RTD1295 Watchdog +======================== + +Required properties: + +- compatible : Should be "realtek,rtd1295-watchdog" +- reg : Specifies the physical base address and size of registers +- clocks : Specifies one clock input + + +Example: + + watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt index bf6d1ca58af7..74b2f03c1515 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt @@ -4,10 +4,11 @@ Required properties: - compatible : Should be "renesas,<soctype>-wdt", and "renesas,rcar-gen3-wdt" or "renesas,rza-wdt" as fallback. Examples with soctypes are: + - "renesas,r7s72100-wdt" (RZ/A1) - "renesas,r8a7795-wdt" (R-Car H3) - "renesas,r8a7796-wdt" (R-Car M3-W) + - "renesas,r8a77970-wdt" (R-Car V3M) - "renesas,r8a77995-wdt" (R-Car D3) - - "renesas,r7s72100-wdt" (RZ/A1) When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first, followed by the generic diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt index 1f6e101e299a..46dcb48e75b4 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt @@ -25,7 +25,7 @@ Optional properties: Example: -watchdog@101D0000 { +watchdog@101d0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt new file mode 100644 index 000000000000..aeaf3e0caf47 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt @@ -0,0 +1,19 @@ +Spreadtrum SoCs Watchdog timer + +Required properties: +- compatible : Should be "sprd,sp9860-wdt". +- reg : Specifies base physical address and size of the registers. +- interrupts : Exactly one interrupt specifier. +- timeout-sec : Contain the default watchdog timeout in seconds. +- clock-names : Contain the input clock names. +- clocks : Phandles to input clocks. + +Example: + watchdog: watchdog@40310000 { + compatible = "sprd,sp9860-wdt"; + reg = <0 0x40310000 0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + timeout-sec = <12>; + clock-names = "enable", "rtc_enable"; + clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index b8f75c51453a..62dd5baad70e 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -8,7 +8,7 @@ Required properties: Example: -wdt: watchdog@01c20c90 { +wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; diff --git a/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt new file mode 100644 index 000000000000..3de96186e92e --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt @@ -0,0 +1,39 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings + +RAVE SP watchdog device is a "MFD cell" device corresponding to +watchdog functionality of RAVE Supervisory Processor. It is expected +that its Device Tree node is specified as a child of the node +corresponding to the parent RAVE SP device (as documented in +Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) + +Required properties: + +- compatible: Depending on wire protocol implemented by RAVE SP + firmware, should be one of: + - "zii,rave-sp-watchdog" + - "zii,rave-sp-watchdog-legacy" + +Optional properties: + +- wdt-timeout: Two byte nvmem cell specified as per + Documentation/devicetree/bindings/nvmem/nvmem.txt + +Example: + + rave-sp { + compatible = "zii,rave-sp-rdu1"; + current-speed = <38400>; + + eeprom { + wdt_timeout: wdt-timeout@8E { + reg = <0x8E 2>; + }; + }; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + nvmem-cells = <&wdt_timeout>; + nvmem-cell-names = "wdt-timeout"; + }; + } + |