diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc')
29 files changed, 1212 insertions, 524 deletions
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml index 4f62ad6ce50c..02ecc93417ef 100644 --- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml +++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 MMC Controller Device Tree Bindings +title: Allwinner A10 MMC Controller allOf: - $ref: "mmc-controller.yaml" @@ -24,6 +24,7 @@ properties: - const: allwinner,sun7i-a20-mmc - const: allwinner,sun8i-a83t-emmc - const: allwinner,sun9i-a80-mmc + - const: allwinner,sun20i-d1-mmc - const: allwinner,sun50i-a64-emmc - const: allwinner,sun50i-a64-mmc - const: allwinner,sun50i-a100-emmc @@ -50,11 +51,17 @@ properties: - const: allwinner,sun50i-h6-mmc - const: allwinner,sun50i-a64-mmc - items: + - const: allwinner,sun20i-d1-emmc + - const: allwinner,sun50i-a100-emmc + - items: - const: allwinner,sun50i-h616-emmc - const: allwinner,sun50i-a100-emmc - items: - const: allwinner,sun50i-h616-mmc - const: allwinner,sun50i-a100-mmc + - items: + - const: allwinner,suniv-f1c100s-mmc + - const: allwinner,sun7i-a20-mmc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml index 60955acb8e57..1c391bec43dc 100644 --- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Amlogic Meson SDHC controller Device Tree Bindings +title: Amlogic Meson SDHC controller allOf: - $ref: "mmc-controller.yaml" diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index a4f74bec68a3..1e69a5a42439 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -185,6 +185,9 @@ examples: clock-names = "mclk", "apb_pclk"; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + mmc@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; @@ -206,12 +209,12 @@ examples: vqmmc-supply = <&vmmci>; }; + - | mmc@101f6000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x101f6000 0x1000>; clocks = <&sdiclk>, <&pclksdi>; clock-names = "mclk", "apb_pclk"; - interrupt-parent = <&vica>; interrupts = <22>; max-frequency = <400000>; bus-width = <4>; @@ -226,6 +229,7 @@ examples: vmmc-supply = <&vmmc_regulator>; }; + - | mmc@52007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index dccd5ad96981..dead421e17d6 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -10,9 +10,6 @@ maintainers: - Al Cooper <alcooperx@gmail.com> - Florian Fainelli <f.fainelli@gmail.com> -allOf: - - $ref: mmc-controller.yaml# - properties: compatible: oneOf: @@ -31,7 +28,7 @@ properties: - const: brcm,sdhci-brcmstb reg: - minItems: 2 + maxItems: 2 reg-names: items: @@ -42,45 +39,72 @@ properties: maxItems: 1 clocks: - maxItems: 1 - description: - handle to core clock for the sdhci controller. + minItems: 1 + items: + - description: handle to core clock for the sdhci controller + - description: handle to improved 150Mhz clock for sdhci controller (Optional clock) clock-names: + minItems: 1 items: - const: sw_sdio + - const: sdio_freq # Optional clock + + clock-frequency: + description: + Maximum operating frequency of sdio_freq sdhci controller clock + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 100000000 + maximum: 150000000 sdhci,auto-cmd12: type: boolean description: Specifies that controller should use auto CMD12 +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + clock-names: + contains: + const: sdio_freq + + then: + required: + - clock-frequency + required: - compatible - reg - interrupts - clocks + - clock-names unevaluatedProperties: false examples: - | mmc@84b0000 { - sd-uhs-sdr50; - sd-uhs-ddr50; - sd-uhs-sdr104; - sdhci,auto-cmd12; compatible = "brcm,bcm7216-sdhci", "brcm,bcm7445-sdhci", "brcm,sdhci-brcmstb"; reg = <0x84b0000 0x260>, <0x84b0300 0x200>; reg-names = "host", "cfg"; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + sdhci,auto-cmd12; interrupts = <0x0 0x26 0x4>; - interrupt-names = "sdio0_0"; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; mmc@84b1000 { + compatible = "brcm,bcm7216-sdhci", + "brcm,bcm7445-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x84b1000 0x260>, <0x84b1300 0x200>; + reg-names = "host", "cfg"; mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; @@ -88,13 +112,7 @@ examples: supports-cqe; non-removable; bus-width = <0x8>; - compatible = "brcm,bcm7216-sdhci", - "brcm,bcm7445-sdhci", - "brcm,sdhci-brcmstb"; - reg = <0x84b1000 0x260>, <0x84b1300 0x200>; - reg-names = "host", "cfg"; interrupts = <0x0 0x27 0x4>; - interrupt-names = "sdio1_0"; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml index 4207fed62dfe..8b1a0fdcb5e3 100644 --- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml @@ -8,7 +8,6 @@ title: Cadence SD/SDIO/eMMC Host Controller (SD4HC) maintainers: - Masahiro Yamada <yamada.masahiro@socionext.com> - - Piotr Sroka <piotrs@cadence.com> allOf: - $ref: mmc-controller.yaml diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt deleted file mode 100644 index 753e9d7d8956..000000000000 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ /dev/null @@ -1,94 +0,0 @@ -* Samsung Exynos specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific -extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 - specific extensions. - - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 - specific extensions. - - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 - specific extensions. - - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 - specific extensions. - - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7 - specific extensions. - - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7 - specific extensions having an SMU. - - "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific - extensions. - -* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface - unit (ciu) clock. This property is applicable only for Exynos5 SoC's and - ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7. - -* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value - in transmit mode and CIU clock phase shift value in receive mode for single - data rate mode operation. Refer notes below for the order of the cells and the - valid values. - -* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value - in transmit mode and CIU clock phase shift value in receive mode for double - data rate mode operation. Refer notes below for the order of the cells and the - valid values. -* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase - shift value for hs400 mode operation. - - Notes for the sdr-timing and ddr-timing values: - - The order of the cells should be - - First Cell: CIU clock phase shift value for tx mode. - - Second Cell: CIU clock phase shift value for rx mode. - - Valid values for SDR and DDR CIU clock timing for Exynos5250: - - valid value for tx phase shift and rx phase shift is 0 to 7. - - when CIU clock divider value is set to 3, all possible 8 phase shift - values can be used. - - if CIU clock divider value is 0 (that is divide by 1), both tx and rx - phase shift clocks should be 0. - -* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode - (Latency value for delay line in Read path) - -Required properties for a slot (Deprecated - Recommend to use one slot per host): - -* gpios: specifies a list of gpios used for command, clock and data bus. The - first gpio is the command line and the second gpio is the clock line. The - rest of the gpios (depending on the bus-width property) are the data lines in - no particular order. The format of the gpio specifier depends on the gpio - controller. -(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) - -Example: - - The MSHC controller node can be split into two portions, SoC specific and - board specific portions as listed below. - - dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc0@12200000 { - cap-mmc-highspeed; - cap-sd-highspeed; - broken-cd; - fifo-depth = <0x80>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; - bus-width = <8>; - }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 17acbc665f5a..29339d0196ec 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -34,21 +34,47 @@ properties: - fsl,imx6ull-usdhc - fsl,imx7d-usdhc - fsl,imx7ulp-usdhc + - fsl,imx8mm-usdhc - fsl,imxrt1050-usdhc - nxp,s32g2-usdhc - items: - enum: + - fsl,imx8mq-usdhc + - const: fsl,imx7d-usdhc + - items: + - enum: + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc + - fsl,imx93-usdhc + - fsl,imx8ulp-usdhc + - const: fsl,imx8mm-usdhc + - items: + - enum: + - fsl,imx8qm-usdhc + - const: fsl,imx8qxp-usdhc + - items: + - enum: + - fsl,imx8dxl-usdhc - fsl,imx8mm-usdhc - fsl,imx8mn-usdhc - fsl,imx8mp-usdhc - - fsl,imx8mq-usdhc - fsl,imx8qm-usdhc - fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc + deprecated: true - items: - enum: - - fsl,imx8ulp-usdhc + - fsl,imx8mn-usdhc + - fsl,imx8mp-usdhc - const: fsl,imx8mm-usdhc + - const: fsl,imx7d-usdhc + deprecated: true + - items: + - enum: + - fsl,imx8qm-usdhc + - const: fsl,imx8qxp-usdhc + - const: fsl,imx7d-usdhc + deprecated: true reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mmc/litex,mmc.yaml b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml new file mode 100644 index 000000000000..ef9e0da44bf8 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/litex,mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LiteX LiteSDCard device + +maintainers: + - Gabriel Somlo <gsomlo@gmail.com> + +description: | + LiteSDCard is a small footprint, configurable SDCard core for FPGA based + system on chips. + + The hardware source is Open Source and can be found on at + https://github.com/enjoy-digital/litesdcard/. + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + const: litex,mmc + + reg: + items: + - description: PHY registers + - description: CORE registers + - description: DMA Reader buffer + - description: DMA Writer buffer + - description: IRQ registers + minItems: 4 + + reg-names: + items: + - const: phy + - const: core + - const: reader + - const: writer + - const: irq + minItems: 4 + + clocks: + maxItems: 1 + description: + Handle to reference clock. + + vmmc-supply: + description: + Handle to fixed-voltage supply for the card power. + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - vmmc-supply + +additionalProperties: false + +examples: + - | + mmc: mmc@12005000 { + compatible = "litex,mmc"; + reg = <0x12005000 0x100>, + <0x12003800 0x100>, + <0x12003000 0x100>, + <0x12004800 0x100>, + <0x12004000 0x100>; + reg-names = "phy", "core", "reader", "writer", "irq"; + clocks = <&reference_clk>; + vmmc-supply = <&vreg_mmc>; + interrupts = <4>; + }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml new file mode 100644 index 000000000000..7c9c652ad59c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,dove-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell sdhci-dove controller + +maintainers: + - Adrian Hunter <adrian.hunter@intel.com> + - Ulf Hansson <ulf.hansson@linaro.org> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + const: marvell,dove-sdhci + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + sdio0: mmc@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>; + clocks = <&gate_clk 9>; + }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml new file mode 100644 index 000000000000..8a97ded15aed --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,orion-sdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell orion-sdio controller + +maintainers: + - Nicolas Pitre <nico@fluxnic.net> + - Ulf Hansson <ulf.hansson@linaro.org> + +allOf: + - $ref: mmc-controller.yaml# + +properties: + compatible: + const: marvell,orion-sdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +unevaluatedProperties: false + +examples: + - | + mmc@d00d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd00d4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt deleted file mode 100644 index c51a62d751dc..000000000000 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +++ /dev/null @@ -1,173 +0,0 @@ -Marvell Xenon SDHCI Controller device tree bindings -This file documents differences between the core mmc properties -described by mmc.txt and the properties used by the Xenon implementation. - -Multiple SDHCs might be put into a single Xenon IP, to save size and cost. -Each SDHC is independent and owns independent resources, such as register sets, -clock and PHY. -Each SDHC should have an independent device tree node. - -Required Properties: -- compatible: should be one of the following - - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC. - Must provide a second register area and marvell,pad-type. - - "marvell,armada-ap806-sdhci": For controllers on Armada AP806. - - "marvell,armada-ap807-sdhci": For controllers on Armada AP807. - - "marvell,armada-cp110-sdhci": For controllers on Armada CP110. - -- clocks: - Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. For Armada AP806 and - CP110, the AXI clock is also mandatory. - -- clock-names: - Array of names corresponding to clocks property. - The input clock for Xenon IP core should be named as "core". - The input clock for the AXI bus must be named as "axi". - -- reg: - * For "marvell,armada-3700-sdhci", two register areas. - The first one for Xenon IP register. The second one for the Armada 3700 SoC - PHY PAD Voltage Control register. - Please follow the examples with compatible "marvell,armada-3700-sdhci" - in below. - Please also check property marvell,pad-type in below. - - * For other compatible strings, one register area for Xenon IP. - -Optional Properties: -- marvell,xenon-sdhc-id: - Indicate the corresponding bit index of current SDHC in - SDHC System Operation Control Register Bit[7:0]. - Set/clear the corresponding bit to enable/disable current SDHC. - If Xenon IP contains only one SDHC, this property is optional. - -- marvell,xenon-phy-type: - Xenon support multiple types of PHYs. - To select eMMC 5.1 PHY, set: - marvell,xenon-phy-type = "emmc 5.1 phy" - eMMC 5.1 PHY is the default choice if this property is not provided. - To select eMMC 5.0 PHY, set: - marvell,xenon-phy-type = "emmc 5.0 phy" - - All those types of PHYs can support eMMC, SD and SDIO. - Please note that this property only presents the type of PHY. - It doesn't stand for the entire SDHC type or property. - For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only - supports eMMC 5.1. - -- marvell,xenon-phy-znr: - Set PHY ZNR value. - Only available for eMMC PHY. - Valid range = [0:0x1F]. - ZNR is set as 0xF by default if this property is not provided. - -- marvell,xenon-phy-zpr: - Set PHY ZPR value. - Only available for eMMC PHY. - Valid range = [0:0x1F]. - ZPR is set as 0xF by default if this property is not provided. - -- marvell,xenon-phy-nr-success-tun: - Set the number of required consecutive successful sampling points - used to identify a valid sampling window, in tuning process. - Valid range = [1:7]. - Set as 0x4 by default if this property is not provided. - -- marvell,xenon-phy-tun-step-divider: - Set the divider for calculating TUN_STEP. - Set as 64 by default if this property is not provided. - -- marvell,xenon-phy-slow-mode: - If this property is selected, transfers will bypass PHY. - Only available when bus frequency lower than 55MHz in SDR mode. - Disabled by default. Please only try this property if timing issues - always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, - SD Default Speed and HS mode and eMMC legacy speed mode. - -- marvell,xenon-tun-count: - Xenon SDHC SoC usually doesn't provide re-tuning counter in - Capabilities Register 3 Bit[11:8]. - This property provides the re-tuning counter. - If this property is not set, default re-tuning counter will - be set as 0x9 in driver. - -- marvell,pad-type: - Type of Armada 3700 SoC PHY PAD Voltage Controller register. - Only valid when "marvell,armada-3700-sdhci" is selected. - Two types: "sd" and "fixed-1-8v". - If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is - switched to 1.8V when later in higher speed mode. - If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC. - Please follow the examples with compatible "marvell,armada-3700-sdhci" - in below. - -Example: -- For eMMC: - - sdhci@aa0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0xaa0000 0x1000>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> - clocks = <&emmc_clk>,<&axi_clk>; - clock-names = "core", "axi"; - bus-width = <4>; - marvell,xenon-phy-slow-mode; - marvell,xenon-tun-count = <11>; - non-removable; - no-sd; - no-sdio; - - /* Vmmc and Vqmmc are both fixed */ - }; - -- For SD/SDIO: - - sdhci@ab0000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0xab0000 0x1000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> - vqmmc-supply = <&sd_vqmmc_regulator>; - vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>, <&axi_clk>; - clock-names = "core", "axi"; - bus-width = <4>; - marvell,xenon-tun-count = <9>; - }; - -- For eMMC with compatible "marvell,armada-3700-sdhci": - - sdhci@aa0000 { - compatible = "marvell,armada-3700-sdhci"; - reg = <0xaa0000 0x1000>, - <phy_addr 0x4>; - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> - clocks = <&emmcclk>; - clock-names = "core"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - non-removable; - no-sd; - no-sdio; - - /* Vmmc and Vqmmc are both fixed */ - - marvell,pad-type = "fixed-1-8v"; - }; - -- For SD/SDIO with compatible "marvell,armada-3700-sdhci": - - sdhci@ab0000 { - compatible = "marvell,armada-3700-sdhci"; - reg = <0xab0000 0x1000>, - <phy_addr 0x4>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> - vqmmc-supply = <&sd_regulator>; - /* Vmmc is fixed */ - clocks = <&sdclk>; - clock-names = "core"; - bus-width = <4>; - - marvell,pad-type = "sd"; - }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml new file mode 100644 index 000000000000..3ee758886558 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Xenon SDHCI Controller + +description: | + This file documents differences between the core MMC properties described by + mmc-controller.yaml and the properties used by the Xenon implementation. + + Multiple SDHCs might be put into a single Xenon IP, to save size and cost. + Each SDHC is independent and owns independent resources, such as register + sets, clock and PHY. + + Each SDHC should have an independent device tree node. + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +properties: + compatible: + oneOf: + - enum: + - marvell,armada-cp110-sdhci + - marvell,armada-ap806-sdhci + + - items: + - const: marvell,armada-ap807-sdhci + - const: marvell,armada-ap806-sdhci + + - items: + - const: marvell,armada-3700-sdhci + - const: marvell,sdhci-xenon + + reg: + minItems: 1 + maxItems: 2 + description: | + For "marvell,armada-3700-sdhci", two register areas. The first one + for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD + Voltage Control register. Please follow the examples with compatible + "marvell,armada-3700-sdhci" in below. + Please also check property marvell,pad-type in below. + + For other compatible strings, one register area for Xenon IP. + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + items: + - const: core + - const: axi + + interrupts: + maxItems: 1 + + marvell,xenon-sdhc-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: | + Indicate the corresponding bit index of current SDHC in SDHC System + Operation Control Register Bit[7:0]. Set/clear the corresponding bit to + enable/disable current SDHC. + + marvell,xenon-phy-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - "emmc 5.1 phy" + - "emmc 5.0 phy" + description: | + Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set: + marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default + choice if this property is not provided. To select eMMC 5.0 PHY, set: + marvell,xenon-phy-type = "emmc 5.0 phy" + + All those types of PHYs can support eMMC, SD and SDIO. Please note that + this property only presents the type of PHY. It doesn't stand for the + entire SDHC type or property. For example, "emmc 5.1 phy" doesn't mean + that this Xenon SDHC only supports eMMC 5.1. + + marvell,xenon-phy-znr: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x1f + default: 0xf + description: | + Set PHY ZNR value. + Only available for eMMC PHY. + + marvell,xenon-phy-zpr: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 0x1f + default: 0xf + description: | + Set PHY ZPR value. + Only available for eMMC PHY. + + marvell,xenon-phy-nr-success-tun: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + default: 0x4 + description: | + Set the number of required consecutive successful sampling points + used to identify a valid sampling window, in tuning process. + + marvell,xenon-phy-tun-step-divider: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 64 + description: | + Set the divider for calculating TUN_STEP. + + marvell,xenon-phy-slow-mode: + type: boolean + description: | + If this property is selected, transfers will bypass PHY. + Only available when bus frequency lower than 55MHz in SDR mode. + Disabled by default. Please only try this property if timing issues + always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, + SD Default Speed and HS mode and eMMC legacy speed mode. + + marvell,xenon-tun-count: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0x9 + description: | + Xenon SDHC SoC usually doesn't provide re-tuning counter in + Capabilities Register 3 Bit[11:8]. + This property provides the re-tuning counter. + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + contains: + const: marvell,armada-3700-sdhci + + then: + properties: + reg: + items: + - description: Xenon IP registers + - description: Armada 3700 SoC PHY PAD Voltage Control register + + marvell,pad-type: + $ref: /schemas/types.yaml#/definitions/string + enum: + - sd + - fixed-1-8v + description: | + Type of Armada 3700 SoC PHY PAD Voltage Controller register. + If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning + and is switched to 1.8V when later in higher speed mode. + If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for + eMMC. + Please follow the examples with compatible + "marvell,armada-3700-sdhci" in below. + + required: + - marvell,pad-type + + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-cp110-sdhci + - marvell,armada-ap807-sdhci + - marvell,armada-ap806-sdhci + + then: + properties: + clocks: + minItems: 2 + + clock-names: + items: + - const: core + - const: axi + + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + // For eMMC + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mmc@aa0000 { + compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&emmc_clk 0>, <&axi_clk 0>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-phy-slow-mode; + marvell,xenon-tun-count = <11>; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + }; + + - | + // For SD/SDIO + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mmc@ab0000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0xab0000 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + vqmmc-supply = <&sd_vqmmc_regulator>; + vmmc-supply = <&sd_vmmc_regulator>; + clocks = <&sdclk 0>, <&axi_clk 0>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-tun-count = <9>; + }; + + - | + // For eMMC with compatible "marvell,armada-3700-sdhci": + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mmc@aa0000 { + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; + reg = <0xaa0000 0x1000>, + <0x17808 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&emmcclk 0>; + clock-names = "core"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + + marvell,pad-type = "fixed-1-8v"; + }; + + - | + // For SD/SDIO with compatible "marvell,armada-3700-sdhci": + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mmc@ab0000 { + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; + reg = <0xab0000 0x1000>, + <0x17808 0x4>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + vqmmc-supply = <&sd_regulator>; + /* Vmmc is fixed */ + clocks = <&sdclk 0>; + clock-names = "core"; + bus-width = <4>; + + marvell,pad-type = "sd"; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml index b17d454442b3..fd347126449a 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-card.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mmc/mmc-card.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MMC Card / eMMC Generic Device Tree Bindings +title: MMC Card / eMMC Generic maintainers: - Ulf Hansson <ulf.hansson@linaro.org> diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 513f3c8758aa..802e3ca8be4d 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -88,11 +88,18 @@ properties: default: 1 max-frequency: - description: - Maximum operating frequency of the bus. + description: | + Maximum operating frequency of the bus: + - for eMMC, the maximum supported frequency is 200MHz, + - for SD/SDIO cards the SDR104 mode has a max supported + frequency of 208MHz, + - some mmc host controllers do support a max frequency upto + 384MHz. + So, lets keep the maximum supported value here. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 400000 - maximum: 200000000 + maximum: 384000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag @@ -298,7 +305,10 @@ properties: vqmmc-supply: description: - Supply for the bus IO line power + Supply for the bus IO line power, such as a level shifter. + If the level shifter is controlled by a GPIO line, this shall + be modeled as a "regulator-fixed" with a GPIO line for + switching the level shifter on/off. mmc-pwrseq: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt deleted file mode 100644 index 5e74db69f581..000000000000 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ /dev/null @@ -1,29 +0,0 @@ -MMC/SD/SDIO slot directly connected to a SPI bus - -This file documents differences between the core properties described -by mmc.txt and the properties used by the mmc_spi driver. - -Required properties: -- spi-max-frequency : maximum frequency for this device (Hz). - -Optional properties: -- voltage-ranges : two cells are required, first cell specifies minimum - slot voltage (mV), second cell specifies maximum slot voltage (mV). - Several ranges could be specified. If not provided, 3.2v..3.4v is assumed. -- gpios : may specify GPIOs in this order: Card-Detect GPIO, - Write-Protect GPIO. Note that this does not follow the - binding from mmc.txt, for historical reasons. - -Example: - - mmc-slot@0 { - compatible = "fsl,mpc8323rdb-mmc-slot", - "mmc-spi-slot"; - reg = <0>; - gpios = <&qe_pio_d 14 1 - &qe_pio_d 15 0>; - voltage-ranges = <3300 3300>; - spi-max-frequency = <50000000>; - interrupts = <42>; - interrupt-parent = <&PIC>; - }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml new file mode 100644 index 000000000000..c0662ce9946d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MMC/SD/SDIO slot directly connected to a SPI bus + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +allOf: + - $ref: "mmc-controller.yaml" + - $ref: /schemas/spi/spi-peripheral-props.yaml + +description: | + The extra properties used by an mmc connected via SPI. + +properties: + compatible: + const: mmc-spi-slot + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + voltage-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: | + Two cells are required, first cell specifies minimum slot voltage (mV), + second cell specifies maximum slot voltage (mV). + items: + - description: | + value for minimum slot voltage in mV + default: 3200 + - description: | + value for maximum slot voltage in mV + default: 3400 + + gpios: + description: | + For historical reasons, this does not follow the generic mmc-controller + binding. + minItems: 1 + items: + - description: Card-Detect GPIO + - description: Write-Protect GPIO + +required: + - compatible + - reg + - spi-max-frequency + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + mmc@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + interrupts = <42>; + interrupt-parent = <&PIC>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml index faf89b0c918f..d8e1e2e9adf2 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml @@ -20,6 +20,7 @@ properties: - mediatek,mt2701-mmc - mediatek,mt2712-mmc - mediatek,mt6779-mmc + - mediatek,mt6795-mmc - mediatek,mt7620-mmc - mediatek,mt7622-mmc - mediatek,mt8135-mmc @@ -30,14 +31,18 @@ properties: - const: mediatek,mt7623-mmc - const: mediatek,mt2701-mmc - items: - - const: mediatek,mt8192-mmc - - const: mediatek,mt8183-mmc - - items: - - const: mediatek,mt8195-mmc + - enum: + - mediatek,mt8186-mmc + - mediatek,mt8188-mmc + - mediatek,mt8192-mmc + - mediatek,mt8195-mmc - const: mediatek,mt8183-mmc reg: - maxItems: 1 + minItems: 1 + items: + - description: base register (required). + - description: top base register (required for MT8183). clocks: description: @@ -66,12 +71,27 @@ properties: - const: ahb_cg interrupts: - maxItems: 1 + description: + Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended + interrupt is required and be configured as wakeup source irq. + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msdc + - const: sdio_wakeup pinctrl-names: + description: + Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin + will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this + scenario. + minItems: 2 items: - const: default - const: state_uhs + - const: state_eint pinctrl-0: description: @@ -83,6 +103,11 @@ properties: should contain uhs mode pin ctrl. maxItems: 1 + pinctrl-2: + description: + should switch dat1 pin to GPIO mode. + maxItems: 1 + assigned-clocks: description: PLL of the source clock. @@ -165,6 +190,16 @@ required: - vmmc-supply - vqmmc-supply +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc +then: + properties: + reg: + minItems: 2 + unevaluatedProperties: false examples: @@ -192,4 +227,32 @@ examples: mediatek,hs400-cmd-resp-sel-rising; }; + mmc3: mmc@11260000 { + compatible = "mediatek,mt8173-mmc"; + reg = <0x11260000 0x1000>; + clock-names = "source", "hclk"; + clocks = <&pericfg CLK_PERI_MSDC30_3>, + <&topckgen CLK_TOP_MSDC50_2_H_SEL>; + interrupt-names = "msdc", "sdio_wakeup"; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>, + <&pio 23 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_uhs>; + pinctrl-2 = <&mmc2_pins_eint>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + mmc-pwrseq = <&wifi_pwrseq>; + }; + ... diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml index ce64b3498378..fe0270207622 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml @@ -197,25 +197,22 @@ allOf: - nvidia,tegra30-sdhci - nvidia,tegra114-sdhci - nvidia,tegra124-sdhci + then: + properties: clocks: items: - description: module clock - minItems: 1 - maxItems: 1 else: properties: clocks: items: - description: module clock - description: timeout clock - minItems: 2 - maxItems: 2 + clock-names: items: - const: sdhci - const: tmclk - minItems: 2 - maxItems: 2 required: - clock-names diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt deleted file mode 100644 index 10f0818a34c5..000000000000 --- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt +++ /dev/null @@ -1,16 +0,0 @@ -* Marvell orion-sdio controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the orion-sdio driver. - -- compatible: Should be "marvell,orion-sdio" -- clocks: reference to the clock of the SDIO interface - -Example: - - mvsdio@d00d4000 { - compatible = "marvell,orion-sdio"; - reg = <0xd00d4000 0x200>; - interrupts = <54>; - clocks = <&gateclk 17>; - }; diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml index 9ce6e06c19db..0424b06cb655 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml @@ -56,9 +56,15 @@ properties: - renesas,sdhi-r8a77980 # R-Car V3H - renesas,sdhi-r8a77990 # R-Car E3 - renesas,sdhi-r8a77995 # R-Car D3 - - renesas,sdhi-r8a779a0 # R-Car V3U + - renesas,sdhi-r9a07g043 # RZ/G2UL - renesas,sdhi-r9a07g044 # RZ/G2{L,LC} + - renesas,sdhi-r9a07g054 # RZ/V2L - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2 + - items: + - enum: + - renesas,sdhi-r8a779a0 # R-Car V3U + - renesas,sdhi-r8a779f0 # R-Car S4-8 + - const: renesas,rcar-gen4-sdhi # R-Car Gen4 reg: maxItems: 1 @@ -83,6 +89,9 @@ properties: - tx - rx + iommus: + maxItems: 1 + power-domains: maxItems: 1 @@ -107,7 +116,10 @@ allOf: properties: compatible: contains: - const: renesas,sdhi-r9a07g044 + enum: + - renesas,sdhi-r9a07g043 + - renesas,sdhi-r9a07g044 + - renesas,sdhi-r9a07g054 then: properties: clocks: @@ -136,6 +148,7 @@ allOf: enum: - renesas,rcar-gen2-sdhi - renesas,rcar-gen3-sdhi + - renesas,rcar-gen4-sdhi then: properties: clocks: diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index 54fb59820d2b..95f59a5e3576 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Rockchip designware mobile storage host controller device tree bindings +title: Rockchip designware mobile storage host controller description: Rockchip uses the Synopsys designware mobile storage host controller @@ -32,6 +32,7 @@ properties: - rockchip,px30-dw-mshc - rockchip,rk1808-dw-mshc - rockchip,rk3036-dw-mshc + - rockchip,rk3128-dw-mshc - rockchip,rk3228-dw-mshc - rockchip,rk3308-dw-mshc - rockchip,rk3328-dw-mshc @@ -39,6 +40,7 @@ properties: - rockchip,rk3399-dw-mshc - rockchip,rk3568-dw-mshc - rockchip,rv1108-dw-mshc + - rockchip,rv1126-dw-mshc - const: rockchip,rk3288-dw-mshc reg: diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml new file mode 100644 index 000000000000..fdaa18481aa0 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +maintainers: + - Jaehoon Chung <jh80.chung@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,exynos4210-dw-mshc + - samsung,exynos4412-dw-mshc + - samsung,exynos5250-dw-mshc + - samsung,exynos5420-dw-mshc + - samsung,exynos5420-dw-mshc-smu + - samsung,exynos7-dw-mshc + - samsung,exynos7-dw-mshc-smu + - axis,artpec8-dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + description: + Handle to "biu" and "ciu" clocks for the + bus interface unit clock and the card interface unit clock. + + clock-names: + items: + - const: biu + - const: ciu + + samsung,dw-mshc-ciu-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: + The divider value for the card interface unit (ciu) clock. + + samsung,dw-mshc-ddr-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CIU clock phase shift value for tx mode + minimum: 0 + maximum: 7 + - description: CIU clock phase shift value for rx mode + minimum: 0 + maximum: 7 + description: + The value of CUI clock phase shift value in transmit mode and CIU clock + phase shift value in receive mode for double data rate mode operation. + See also samsung,dw-mshc-hs400-timing property. + + samsung,dw-mshc-hs400-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CIU clock phase shift value for tx mode + minimum: 0 + maximum: 7 + - description: CIU clock phase shift value for rx mode + minimum: 0 + maximum: 7 + description: | + The value of CIU TX and RX clock phase shift value for HS400 mode + operation. + Valid values for SDR and DDR CIU clock timing:: + - valid value for tx phase shift and rx phase shift is 0 to 7. + - when CIU clock divider value is set to 3, all possible 8 phase shift + values can be used. + - if CIU clock divider value is 0 (that is divide by 1), both tx and rx + phase shift clocks should be 0. + If missing, values from samsung,dw-mshc-ddr-timing property are used. + + samsung,dw-mshc-sdr-timing: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CIU clock phase shift value for tx mode + minimum: 0 + maximum: 7 + - description: CIU clock phase shift value for rx mode + minimum: 0 + maximum: 7 + description: + The value of CIU clock phase shift value in transmit mode and CIU clock + phase shift value in receive mode for single data rate mode operation. + See also samsung,dw-mshc-hs400-timing property. + + samsung,read-strobe-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + RCLK (Data strobe) delay to control HS400 mode (Latency value for delay + line in Read path). If missing, default from hardware is used. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - samsung,dw-mshc-ddr-timing + - samsung,dw-mshc-sdr-timing + +allOf: + - $ref: "synopsys-dw-mshc-common.yaml#" + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5250-dw-mshc + - samsung,exynos5420-dw-mshc + - samsung,exynos7-dw-mshc + - samsung,exynos7-dw-mshc-smu + - axis,artpec8-dw-mshc + then: + required: + - samsung,dw-mshc-ciu-div + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <200000000>; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml new file mode 100644 index 000000000000..5d873a60f650 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC SDHCI Controller + +maintainers: + - Jaehoon Chung <jh80.chung@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c6410-sdhci + - samsung,exynos4210-sdhci + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 5 + + clock-names: + minItems: 2 + items: + - const: hsmmc + - pattern: "^mmc_busclk.[0-3]$" + - pattern: "^mmc_busclk.[0-3]$" + - pattern: "^mmc_busclk.[0-3]$" + - pattern: "^mmc_busclk.[0-3]$" + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos4210-sdhci + then: + properties: + clocks: + maxItems: 2 + clock-names: + items: + - const: hsmmc + - const: mmc_busclk.2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mmc@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "hsmmc", "mmc_busclk.2"; + bus-width = <4>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + }; diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt deleted file mode 100644 index 42e0a9afa100..000000000000 --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Samsung's SDHCI Controller device tree bindings - -Samsung's SDHCI controller is used as a connectivity interface with external -MMC, SD and eMMC storage mediums. This file documents differences between the -core mmc properties described by mmc.txt and the properties used by the -Samsung implementation of the SDHCI controller. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci - controller. - - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci - controller. - -Required Board Specific Properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". - -Example: - sdhci@12530000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12530000 0x100>; - interrupts = <0 75 0>; - bus-width = <4>; - cd-gpios = <&gpk2 2 0>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; - }; - - Note: This example shows both SoC specific and board specific properties - in a single device node. The properties can be actually be separated - into SoC specific node and board specific node. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 9fbf16b3bc8d..ea9121fb188d 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -21,6 +21,7 @@ properties: - const: ti,j721e-sdhci-4bit - const: ti,am64-sdhci-8bit - const: ti,am64-sdhci-4bit + - const: ti,am62-sdhci - items: - const: ti,j7200-sdhci-8bit - const: ti,j721e-sdhci-8bit @@ -50,6 +51,9 @@ properties: sdhci-caps-mask: true + dma-coherent: + type: boolean + # PHY output tap delays: # Used to delay the data valid window and align it to the sampling clock. # Binding needs to be provided for each supported speed mode otherwise the @@ -185,6 +189,13 @@ properties: description: Clock Delay Buffer Select $ref: "/schemas/types.yaml#/definitions/uint32" + ti,fails-without-test-cd: + $ref: /schemas/types.yaml#/definitions/flag + description: + When present, indicates that the CD line is not connected + and the controller is required to be forced into Test mode + to set the TESTCD bit. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt deleted file mode 100644 index ae9aab9abcd7..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt +++ /dev/null @@ -1,14 +0,0 @@ -* Marvell sdhci-dove controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. - -- compatible: Should be "marvell,dove-sdhci". - -Example: - -sdio0: sdio@92000 { - compatible = "marvell,dove-sdhci"; - reg = <0x92000 0x100>; - interrupts = <35>; -}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt deleted file mode 100644 index 6a8cc261bf61..000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ /dev/null @@ -1,122 +0,0 @@ -* Qualcomm SDHCI controller (sdhci-msm) - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-msm driver. - -Required properties: -- compatible: Should contain a SoC-specific string and a IP version string: - version strings: - "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 - "qcom,sdhci-msm-v5" for sdcc version 5.0 - For SDCC version 5.0.0, MCI registers are removed from SDCC - interface and some registers are moved to HC. New compatible - string is added to support this change - "qcom,sdhci-msm-v5". - full compatible strings with SoC and version: - "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4" - "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" - "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" - "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; - "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; - "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" - "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; - "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5" - NOTE that some old device tree files may be floating around that only - have the string "qcom,sdhci-msm-v4" without the SoC compatible string - but doing that should be considered a deprecated practice. - -- reg: Base address and length of the register in the following order: - - Host controller register map (required) - - SD Core register map (required for controllers earlier than msm-v5) - - CQE register map (Optional, CQE support is present on SDHC instance meant - for eMMC and version v4.2 and above) - - Inline Crypto Engine register map (optional) -- reg-names: When CQE register map is supplied, below reg-names are required - - "hc" for Host controller register map - - "core" for SD core register map - - "cqhci" for CQE register map - - "ice" for Inline Crypto Engine register map (optional) -- interrupts: Should contain an interrupt-specifiers for the interrupts: - - Host controller interrupt (required) -- pinctrl-names: Should contain only one value - "default". -- pinctrl-0: Should specify pin control groups used for this controller. -- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names. -- clock-names: Should contain the following: - "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) - "core" - SDC MMC clock (MCLK) (required) - "bus" - SDCC bus voter clock (optional) - "xo" - TCXO clock (optional) - "cal" - reference clock for RCLK delay calibration (optional) - "sleep" - sleep clock for RCLK delay calibration (optional) - "ice" - clock for Inline Crypto Engine (optional) - -- qcom,ddr-config: Certain chipsets and platforms require particular settings - for the DDR_CONFIG register. Use this field to specify the register - value as per the Hardware Programming Guide. - -- qcom,dll-config: Chipset and Platform specific value. Use this field to - specify the DLL_CONFIG register value as per Hardware Programming Guide. - -Optional Properties: -* Following bus parameters are required for interconnect bandwidth scaling: -- interconnects: Pairs of phandles and interconnect provider specifier - to denote the edge source and destination ports of - the interconnect path. - -- interconnect-names: For sdhc, we have two main paths. - 1. Data path : sdhc to ddr - 2. Config path : cpu to sdhc - For Data interconnect path the name supposed to be - is "sdhc-ddr" and for config interconnect path it is - "cpu-sdhc". - Please refer to Documentation/devicetree/bindings/ - interconnect/ for more details. - -Example: - - sdhc_1: sdhci@f9824900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; - interrupts = <0 123 0>; - bus-width = <8>; - non-removable; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; - - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; - interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>, - <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>; - interconnect-names = "sdhc-ddr","cpu-sdhc"; - - qcom,dll-config = <0x000f642c>; - qcom,ddr-config = <0x80040868>; - }; - - sdhc_2: sdhci@f98a4900 { - compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; - reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; - interrupts = <0 125 0>; - bus-width = <4>; - cd-gpios = <&msmgpio 62 0x1>; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>; - - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; - - qcom,dll-config = <0x0007642c>; - qcom,ddr-config = <0x80040868>; - }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml new file mode 100644 index 000000000000..a96f143479c7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -0,0 +1,258 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm SDHCI controller (sdhci-msm) + +maintainers: + - Bhupesh Sharma <bhupesh.sharma@linaro.org> + +description: + Secure Digital Host Controller Interface (SDHCI) present on + Qualcomm SOCs supports SD/MMC/SDIO devices. + +properties: + compatible: + oneOf: + - enum: + - qcom,sdhci-msm-v4 + deprecated: true + - items: + - enum: + - qcom,apq8084-sdhci + - qcom,msm8226-sdhci + - qcom,msm8953-sdhci + - qcom,msm8974-sdhci + - qcom,msm8916-sdhci + - qcom,msm8992-sdhci + - qcom,msm8994-sdhci + - qcom,msm8996-sdhci + - qcom,msm8998-sdhci + - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0 + - items: + - enum: + - qcom,qcs404-sdhci + - qcom,sc7180-sdhci + - qcom,sc7280-sdhci + - qcom,sdm630-sdhci + - qcom,sdm670-sdhci + - qcom,sdm845-sdhci + - qcom,sdx55-sdhci + - qcom,sdx65-sdhci + - qcom,sm6115-sdhci + - qcom,sm6125-sdhci + - qcom,sm6350-sdhci + - qcom,sm8150-sdhci + - qcom,sm8250-sdhci + - qcom,sm8450-sdhci + - const: qcom,sdhci-msm-v5 # for sdcc version 5.0 + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + maxItems: 4 + + clocks: + minItems: 3 + items: + - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock + - description: SDC MMC clock, MCLK + - description: TCXO clock + - description: clock for Inline Crypto Engine + - description: SDCC bus voter clock + - description: reference clock for RCLK delay calibration + - description: sleep clock for RCLK delay calibration + + clock-names: + minItems: 2 + items: + - const: iface + - const: core + - const: xo + - const: ice + - const: bus + - const: cal + - const: sleep + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: hc_irq + - const: pwr_irq + + pinctrl-names: + minItems: 1 + items: + - const: default + - const: sleep + + pinctrl-0: + description: + Should specify pin control groups used for this controller. + + pinctrl-1: + description: + Should specify sleep pin control groups used for this controller. + + resets: + maxItems: 1 + + qcom,ddr-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: platform specific settings for DDR_CONFIG reg. + + qcom,dll-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: platform specific settings for DLL_CONFIG reg. + + iommus: + minItems: 1 + maxItems: 8 + description: | + phandle to apps_smmu node with sid mask. + + interconnects: + items: + - description: data path, sdhc to ddr + - description: config path, cpu to sdhc + + interconnect-names: + items: + - const: sdhc-ddr + - const: cpu-sdhc + + power-domains: + description: A phandle to sdhci power domain node + maxItems: 1 + + mmc-ddr-1_8v: true + + mmc-hs200-1_8v: true + + mmc-hs400-1_8v: true + + bus-width: true + + max-frequency: true + + operating-points-v2: true + +patternProperties: + '^opp-table(-[a-z0-9]+)?$': + if: + properties: + compatible: + const: operating-points-v2 + then: + patternProperties: + '^opp-?[0-9]+$': + required: + - required-opps + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +allOf: + - $ref: mmc-controller.yaml# + + - if: + properties: + compatible: + contains: + enum: + - qcom,sdhci-msm-v4 + then: + properties: + reg: + minItems: 2 + items: + - description: Host controller register map + - description: SD Core register map + - description: CQE register map + - description: Inline Crypto Engine register map + reg-names: + minItems: 2 + items: + - const: hc + - const: core + - const: cqhci + - const: ice + else: + properties: + reg: + minItems: 1 + items: + - description: Host controller register map + - description: CQE register map + - description: Inline Crypto Engine register map + reg-names: + minItems: 1 + items: + - const: hc + - const: cqhci + - const: ice + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,gcc-sm8250.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x4a0 0x0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd SM8250_CX>; + + operating-points-v2 = <&sdhc2_opp_table>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml index f300ced4cdf3..71f8e726d641 100644 --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - rockchip,rk3568-dwcmshc + - rockchip,rk3588-dwcmshc - snps,dwcmshc-sdhci reg: |