2506 files changed, 95326 insertions, 31823 deletions

diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index c9abfbe3f0aa..bf2d8a8ced77 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -3,9 +3,10 @@ DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
 
-DT_SCHEMA_LINT = $(shell which yamllint)
+DT_SCHEMA_LINT = $(shell which yamllint || \
+  echo "warning: python package 'yamllint' not installed, skipping" >&2)
 
-DT_SCHEMA_MIN_VERSION = 2021.2.1
+DT_SCHEMA_MIN_VERSION = 2022.3
 
 PHONY += check_dtschema_version
 check_dtschema_version:
@@ -24,18 +25,11 @@ quiet_cmd_extract_ex = DTEX    $@
 $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 	$(call if_changed,extract_ex)
 
-# Use full schemas when checking %.example.dts
-DT_TMP_SCHEMA := $(obj)/processed-schema-examples.json
-
 find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
-		-name 'processed-schema*' ! \
-		-name '*.example.dt.yaml' \)
+		-name 'processed-schema*' \)
 
-ifeq ($(DT_SCHEMA_FILES),)
-find_cmd = $(find_all_cmd)
-else
-find_cmd = echo $(addprefix $(srctree)/, $(DT_SCHEMA_FILES))
-endif
+find_cmd = $(find_all_cmd) | grep -F "$(DT_SCHEMA_FILES)"
+CHK_DT_DOCS := $(shell $(find_cmd))
 
 quiet_cmd_yamllint = LINT    $(src)
       cmd_yamllint = ($(find_cmd) | \
@@ -48,9 +42,7 @@ quiet_cmd_chk_bindings = CHKDT   $@
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = f=$$(mktemp) ; \
-                      $(if $(DT_MK_SCHEMA_FLAGS), \
-                           printf '%s\n' $(real-prereqs), \
-                           $(find_all_cmd)) > $$f ; \
+                      $(find_all_cmd) > $$f ; \
                       $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
 		      rm -f $$f
 
@@ -65,40 +57,24 @@ DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address \
-	-Wno-interrupt_provider
+	-Wno-interrupt_provider \
+	-Wno-unique_unit_address \
+	-Wunique_unit_address_if_enabled
 
 # Disable undocumented compatible checks until warning free
 override DT_CHECKER_FLAGS ?=
 
-$(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
+$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
 	$(call if_changed_rule,chkdt)
 
-ifeq ($(DT_SCHEMA_FILES),)
-
-# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
-# Just copy processed-schema-examples.json
-
-$(obj)/processed-schema.json: $(obj)/processed-schema-examples.json FORCE
-	$(call if_changed,copy)
-
-DT_SCHEMA_FILES = $(DT_DOCS)
-
-else
-
-# If DT_SCHEMA_FILES is specified, use it for processed-schema.json
-
-$(obj)/processed-schema.json: DT_MK_SCHEMA_FLAGS := -u
-$(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
-	$(call if_changed,mk_schema)
-
-endif
-
-always-$(CHECK_DT_BINDING) += processed-schema-examples.json
-always-$(CHECK_DTBS)       += processed-schema.json
-always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+always-y += processed-schema.json
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS))
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS))
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
 clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
-			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
+			-name '*.example.dtb' \) -delete 2>/dev/null)
+
+dt_compatible_check: $(obj)/processed-schema.json
+	$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index 02dc72c97645..e012f612f039 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/actions.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi platforms device tree bindings
+title: Actions Semi platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..3292c669ee11
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index c15c92fdf2ed..3eee03aa935c 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/altera.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Altera's SoCFPGA platform device tree bindings
+title: Altera's SoCFPGA platform
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
@@ -13,12 +13,54 @@ properties:
   $nodename:
     const: "/"
   compatible:
-    items:
-      - enum:
-          - altr,socfpga-cyclone5
-          - altr,socfpga-arria5
-          - altr,socfpga-arria10
-      - const: altr,socfpga
+    oneOf:
+      - description: Arria 5 boards
+        items:
+          - enum:
+              - altr,socfpga-arria5-socdk
+          - const: altr,socfpga-arria5
+          - const: altr,socfpga
+
+      - description: Arria 10 boards
+        items:
+          - enum:
+              - altr,socfpga-arria10-socdk
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Mercury+ AA1 boards
+        items:
+          - enum:
+              - google,chameleon-v3
+          - const: enclustra,mercury-aa1
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Cyclone 5 boards
+        items:
+          - enum:
+              - altr,socfpga-cyclone5-socdk
+              - denx,mcvevk
+              - ebv,socrates
+              - macnica,sodia
+              - novtech,chameleon96
+              - samtec,vining
+              - terasic,de0-atlas
+              - terasic,socfpga-cyclone5-sockit
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Stratix 10 boards
+        items:
+          - enum:
+              - altr,socfpga-stratix10-socdk
+              - altr,socfpga-stratix10-swvp
+          - const: altr,socfpga-stratix10
+
+      - description: SoCFPGA VT
+        items:
+          - const: altr,socfpga-vt
+          - const: altr,socfpga
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml
index 0f03135d91b6..37dbb4768e5b 100644
--- a/Documentation/devicetree/bindings/arm/amazon,al.yaml
+++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amazon,al.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amazon's Annapurna Labs Alpine Platform Device Tree Bindings
+title: Amazon's Annapurna Labs Alpine Platform
 
 maintainers:
   - Hanna Hawa <hhhawa@amazon.com>
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 36081734f720..9fda2436c618 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amlogic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic MesonX device tree bindings
+title: Amlogic MesonX
 
 maintainers:
   - Kevin Hilman <khilman@baylibre.com>
@@ -108,6 +108,7 @@ properties:
               - amlogic,p230
               - amlogic,p231
               - libretech,aml-s905d-pc
+              - osmc,vero4k-plus
               - phicomm,n1
               - smartlabs,sml5442tw
               - videostrong,gxl-kii-pro
@@ -119,6 +120,7 @@ properties:
           - enum:
               - amlogic,q200
               - amlogic,q201
+              - azw,gt1-ultimate
               - khadas,vim2
               - kingnovel,r-box-pro
               - libretech,aml-s912-pc
@@ -135,6 +137,7 @@ properties:
           - enum:
               - amlogic,s400
               - jethome,jethub-j100
+              - jethome,jethub-j110
           - const: amlogic,a113d
           - const: amlogic,meson-axg
 
@@ -170,9 +173,14 @@ properties:
       - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
         items:
           - enum:
+              - amediatech,x96-air
+              - amediatech,x96-air-gbit
               - bananapi,bpi-m5
+              - cyx,a95xf3-air
+              - cyx,a95xf3-air-gbit
               - hardkernel,odroid-c4
               - hardkernel,odroid-hc4
+              - haochuangyi,h96-max
               - khadas,vim3l
               - seirobotics,sei610
           - const: amlogic,sm1
@@ -183,6 +191,12 @@ properties:
               - amlogic,ad401
           - const: amlogic,a1
 
+      - description: Boards with the Amlogic Meson S4 S805X2 SoC
+        items:
+          - enum:
+              - amlogic,aq222
+          - const: amlogic,s4
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 6cc74523ebfd..1748f1605cc7 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Firmware registers Interface
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Meson SoCs have a register bank with status and data shared with the
diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
index 8d93e8a6cc18..7262f3c09867 100644
--- a/Documentation/devicetree/bindings/arm/apple.yaml
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/apple.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Apple ARM Machine Device Tree Bindings
+title: Apple ARM Machine
 
 maintainers:
   - Hector Martin <marcan@marcan.st>
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
index b6b5d3a912b3..0dc957a56d35 100644
--- a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -42,7 +42,7 @@ patternProperties:
     description:
       The individual power management domains within this controller
     type: object
-    $ref: /power/apple,pmgr-pwrstate.yaml#
+    $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
index 4682f991a5c8..d28303d909e1 100644
--- a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,cci-400.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM CCI Cache Coherent Interconnect Device Tree Binding
+title: ARM CCI Cache Coherent Interconnect
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -119,6 +119,11 @@ examples:
           arm,hbi = <0x249>;
           interrupt-parent = <&gic>;
 
+          gic: interrupt-controller {
+              interrupt-controller;
+              #interrupt-cells = <3>;
+          };
+
           /*
            * This CCI node corresponds to a CCI component whose control
            * registers sits at address 0x000000002c090000.
@@ -166,16 +171,6 @@ examples:
               };
           };
 
-          dma0: dma@3000000 {
-              /* compatible = "arm,pl330", "arm,primecell"; */
-              cci-control-port = <&cci_control0>;
-              reg = <0x0 0x3000000 0x0 0x1000>;
-              interrupts = <10>;
-              #dma-cells = <1>;
-              #dma-channels = <8>;
-              #dma-requests = <32>;
-          };
-
           cci@2c090000 {
               compatible = "arm,cci-400";
               #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
new file mode 100644
index 000000000000..2bae06eed693
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Address Translation Unit (CATU)
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Address Translation Unit (CATU) translates addresses between an
+  AXI master and system memory. The CATU is normally used along with the TMC to
+  implement scattering of virtual trace buffers in physical memory. The CATU
+  translates contiguous Virtual Addresses (VAs) from an AXI master into
+  non-contiguous Physical Addresses (PAs) that are intended for system memory.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-catu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-catu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  interrupts:
+    maxItems: 1
+    description: Address translation error interrupt
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI Slave connected to another Coresight component
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    catu@207e0000 {
+        compatible = "arm,coresight-catu", "arm,primecell";
+        reg = <0x207e0000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        in-ports {
+            port {
+                catu_in_port: endpoint {
+                    remote-endpoint = <&etr_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
new file mode 100644
index 000000000000..0a6bc03ebe00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight CPU Debug Component
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight CPU debug component are compliant with the ARMv8 architecture
+  reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+  external debug module is mainly used for two modes: self-hosted debug and
+  external debug, and it can be accessed from mmio region from Coresight and
+  eventually the debug module connects with CPU for debugging. And the debug
+  module provides sample-based profiling extension, which can be used to sample
+  CPU program counter, secure state and exception level, etc; usually every CPU
+  has one dedicated debug module to be connected.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cpu-debug
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-cpu-debug
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  cpu:
+    description:
+      A phandle to the cpu this debug component is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle to the debug power domain if the debug logic has its own
+      dedicated power domain. CPU idle states may also need to be separately
+      constrained to keep CPU cores powered.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - cpu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    debug@f6590000 {
+        compatible = "arm,coresight-cpu-debug", "arm,primecell";
+        reg = <0xf6590000 0x1000>;
+        clocks = <&sys_ctrl 1>;
+        clock-names = "apb_pclk";
+        cpu = <&cpu0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index 21e3515491f4..0c5b875cb654 100644
--- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -2,7 +2,7 @@
 # Copyright 2019 Linaro Ltd.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/coresight-cti.yaml#
+$id: http://devicetree.org/schemas/arm/arm,coresight-cti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ARM Coresight Cross Trigger Interface (CTI) device.
@@ -12,8 +12,7 @@ description: |
   to one or more CoreSight components and/or a CPU, with CTIs interconnected in
   a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
   The ECT components are not part of the trace generation data path and are thus
-  not part of the CoreSight graph described in the general CoreSight bindings
-  file coresight.txt.
+  not part of the CoreSight graph.
 
   The CTI component properties define the connections between the individual
   CTI and the components it is directly connected to, consisting of input and
@@ -99,6 +98,9 @@ properties:
       base cti node if compatible string arm,coresight-cti-v8-arch is used,
       or may appear in a trig-conns child node when appropriate.
 
+  power-domains:
+    maxItems: 1
+
   arm,cti-ctm-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
new file mode 100644
index 000000000000..44a1041cb0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Programmable Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight funnel merges 2-8 trace sources into a single trace
+  stream with programmable enable and priority of input ports.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-funnel
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-funnel
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-7])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    funnel@20040000 {
+        compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+        reg = <0x20040000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                funnel_out_port0: endpoint {
+                    remote-endpoint = <&replicator_in_port0>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                funnel_in_port0: endpoint {
+                    remote-endpoint = <&ptm0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                funnel_in_port1: endpoint {
+                    remote-endpoint = <&ptm1_out_port>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                funnel_in_port2: endpoint {
+                    remote-endpoint = <&etm0_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
new file mode 100644
index 000000000000..03792e9bd97a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Programmable Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-replicator
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-replicator
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  qcom,replicator-loses-context:
+    type: boolean
+    description:
+      Indicates that the replicator will lose register context when AMBA clock
+      is removed which is observed in some replicator designs.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[01])?$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    replicator@20120000 {
+        compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+        reg = <0x20120000 0x1000>;
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&etr_in_port>;
+                };
+            };
+        };
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&csys2_funnel_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
new file mode 100644
index 000000000000..90679788e0bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace Buffer
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is
+  used as a circular buffer.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-etb10
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-etb10
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etb@20010000 {
+        compatible = "arm,coresight-etb10", "arm,primecell";
+        reg = <0x20010000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etb_in_port: endpoint {
+                    remote-endpoint = <&replicator_out_port0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
new file mode 100644
index 000000000000..01200f67504a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Embedded Trace Macrocell (ETM) is a real-time trace module providing
+  instruction and data tracing of a processor.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-etm3x
+          - arm,coresight-etm4x
+          - arm,coresight-etm4x-sysreg
+  required:
+    - compatible
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,coresight-etm4x-sysreg
+    then:
+      $ref: /schemas/arm/primecell.yaml#
+      required:
+        - reg
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Embedded Trace Macrocell with memory mapped access.
+        items:
+          - enum:
+              - arm,coresight-etm3x
+              - arm,coresight-etm4x
+          - const: arm,primecell
+      - description:
+          Embedded Trace Macrocell (version 4.x), with system register access only
+        const: arm,coresight-etm4x-sysreg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  arm,coresight-loses-context-with-cpu:
+    type: boolean
+    description:
+      Indicates that the hardware will lose register context on CPU power down
+      (e.g. CPUIdle). An example of where this may be needed are systems which
+      contain a coresight component and CPU in the same power domain. When the
+      CPU powers down the coresight component also powers down and loses its
+      context.
+
+  arm,cp14:
+    type: boolean
+    description:
+      Must be present if the system accesses ETM/PTM management registers via
+      co-processor 14.
+
+  qcom,skip-power-up:
+    type: boolean
+    description:
+      Indicates that an implementation can skip powering up the trace unit.
+      TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems
+      since ETMs are in the same power domain as their CPU cores. This property
+      is required to identify such systems with hardware errata where the CPU
+      watchdog counter is stopped when TRCPDCR.PU is set.
+
+  cpu:
+    description:
+      phandle to the cpu this ETM is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection from the ETM to CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - cpu
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ptm@2201c000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201c000 0x1000>;
+
+        cpu = <&cpu0>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm0_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port0>;
+                };
+            };
+        };
+    };
+
+    ptm@2201d000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201d000 0x1000>;
+
+        cpu = <&cpu1>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm1_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
new file mode 100644
index 000000000000..cc8c3baa79b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight static funnel merges 2-8 trace sources into a single trace
+  stream.
+
+properties:
+  compatible:
+    const: arm,coresight-static-funnel
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[0-7]$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    funnel {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-funnel";
+
+        out-ports {
+            port {
+                combo_funnel_out: endpoint {
+                    remote-endpoint = <&top_funnel_in>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                combo_funnel_in0: endpoint {
+                    remote-endpoint = <&cluster0_etf_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                combo_funnel_in1: endpoint {
+                    remote-endpoint = <&cluster1_etf_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
new file mode 100644
index 000000000000..1892a091ac35
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+properties:
+  compatible:
+    const: arm,coresight-static-replicator
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[01]$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    replicator {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-replicator";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&etb_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+        };
+
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&funnel_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
new file mode 100644
index 000000000000..378380c3f5aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight System Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The STM is a trace source that is integrated into a CoreSight system, designed
+  primarily for high-bandwidth trace of instrumentation embedded into software.
+  This instrumentation is made up of memory-mapped writes to the STM Advanced
+  eXtensible Interface (AXI) slave, which carry information about the behavior
+  of the software.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-stm
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-stm
+      - const: arm,primecell
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stm-base
+      - const: stm-stimulus-base
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    stm@20100000 {
+        compatible = "arm,coresight-stm", "arm,primecell";
+        reg = <0x20100000 0x1000>,
+              <0x28000000 0x180000>;
+        reg-names = "stm-base", "stm-stimulus-base";
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                stm_out_port: endpoint {
+                    remote-endpoint = <&main_funnel_in_port2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
new file mode 100644
index 000000000000..cb8dceaca70e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Memory Controller
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
+  FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
+  mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tmc
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tmc
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  arm,buffer-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Size of contiguous buffer space for TMC ETR (embedded trace router). The
+      buffer size can be configured dynamically via buffer_size property in
+      sysfs instead.
+
+  arm,scatter-gather:
+    type: boolean
+    description:
+      Indicates that the TMC-ETR can safely use the SG mode on this system.
+
+  arm,max-burst-size:
+    description:
+      The maximum burst size initiated by TMC on the AXI master interface. The
+      burst size can be in the range [0..15], the setting supports one data
+      transfer per burst up to a maximum of 16 data transfers per burst.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI or ATB Master output connection. Used for ETR
+          and ETF configurations.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etr@20070000 {
+        compatible = "arm,coresight-tmc", "arm,primecell";
+        reg = <0x20070000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etr_in_port: endpoint {
+                    remote-endpoint = <&replicator2_out_port0>;
+                };
+            };
+        };
+
+        out-ports {
+            port {
+                etr_out_port: endpoint {
+                    remote-endpoint = <&catu_in_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
new file mode 100644
index 000000000000..61a0cdc27745
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Port Interface Unit
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Trace Port Interface Unit captures trace data from the trace bus
+  and outputs it to an external trace port.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tpiu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tpiu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpiu@e3c05000 {
+        compatible = "arm,coresight-tpiu", "arm,primecell";
+        reg = <0xe3c05000 0x1000>;
+
+        clocks = <&clk_375m>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                tpiu_in_port: endpoint {
+                    remote-endpoint = <&funnel4_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
new file mode 100644
index 000000000000..693f3fe7be60
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Corstone1000
+
+maintainers:
+  - Vishnu Banavath <vishnu.banavath@arm.com>
+  - Rui Miguel Silva <rui.silva@linaro.org>
+
+description: |+
+  ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
+  provides a flexible compute architecture that combines Cortex‑A and Cortex‑M
+  processors.
+
+  Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion
+  systems for M-Class (or other) processors for adding sensors, connectivity,
+  video, audio and machine learning at the edge System and security IPs to build
+  a secure SoC for a range of rich IoT applications, for example gateways, smart
+  cameras and embedded systems.
+
+  Integrated Secure Enclave providing hardware Root of Trust and supporting
+  seamless integration of the optional CryptoCell™-312 cryptographic
+  accelerator.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA
+          implementation of the Corstone1000 in the MPS3 prototyping board. See
+          ARM document DAI0550.
+        items:
+          - const: arm,corstone1000-mps3
+      - description: Corstone1000 FVP is the Fixed Virtual Platform
+          implementation of this system. See ARM ecosystems FVP's.
+        items:
+          - const: arm,corstone1000-fvp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ete.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
index 7f9b2d1e1147..108460627d9a 100644
--- a/Documentation/devicetree/bindings/arm/ete.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -2,7 +2,7 @@
 # Copyright 2021, Arm Ltd
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/ete.yaml#"
+$id: "http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: ARM Embedded Trace Extensions
@@ -20,7 +20,6 @@ description: |
   Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
   legacy CoreSight components, a node must be listed per instance, along
   with any optional connection graph as per the coresight bindings.
-  See bindings/arm/coresight.txt.
 
 properties:
   $nodename:
@@ -34,6 +33,9 @@ properties:
       Handle to the cpu this ETE is bound to.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  power-domains:
+    maxItems: 1
+
   out-ports:
     description: |
       Output connections from the ETE to legacy CoreSight trace bus.
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
index 528eee64290a..98ff5698ae1f 100644
--- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Integrator Boards Device Tree Bindings
+title: ARM Integrator Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
index 4f9b21f49e84..8d3ed2e4ed31 100644
--- a/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,realview.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM RealView Boards Device Tree Bindings
+title: ARM RealView Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/trbe.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
index 4402d7bfd1fc..b1322658063a 100644
--- a/Documentation/devicetree/bindings/arm/trbe.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
@@ -2,7 +2,7 @@
 # Copyright 2021, Arm Ltd
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/trbe.yaml#"
+$id: "http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: ARM Trace Buffer Extensions
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
new file mode 100644
index 000000000000..491eef1e1b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Versatile system registers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    items:
+      - const: arm,versatile-sysreg
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  panel:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
index 34b437c72751..13e52ba92060 100644
--- a/Documentation/devicetree/bindings/arm/arm,versatile.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Boards Device Tree Bindings
+title: ARM Versatile Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index a4b4452afc1d..eec190a96225 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Express and Juno Boards Device Tree Bindings
+title: ARM Versatile Express and Juno Boards
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
deleted file mode 100644
index 6efabba530f1..000000000000
--- a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
-
-ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
-with a shared L3 memory system, control logic and external interfaces to
-form a multicore cluster. The PMU enables to gather various statistics on
-the operations of the DSU. The PMU provides independent 32bit counters that
-can count any of the supported events, along with a 64bit cycle counter.
-The PMU is accessed via CPU system registers and has no MMIO component.
-
-** DSU PMU required properties:
-
-- compatible	: should be one of :
-
-		"arm,dsu-pmu"
-
-- interrupts	: Exactly 1 SPI must be listed.
-
-- cpus		: List of phandles for the CPUs connected to this DSU instance.
-
-
-** Example:
-
-dsu-pmu-0 {
-	compatible = "arm,dsu-pmu";
-	interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
-	cpus = <&cpu_0>, <&cpu_1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
new file mode 100644
index 000000000000..217a1d674863
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SoC based boards
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AST2400 based boards
+        items:
+          - enum:
+              - facebook,galaxy100-bmc
+              - facebook,wedge100-bmc
+              - facebook,wedge40-bmc
+              - microsoft,olympus-bmc
+              - quanta,q71l-bmc
+              - tyan,palmetto-bmc
+              - yadro,vesnin-bmc
+          - const: aspeed,ast2400
+
+      - description: AST2500 based boards
+        items:
+          - enum:
+              - amd,daytonax-bmc
+              - amd,ethanolx-bmc
+              - ampere,mtjade-bmc
+              - aspeed,ast2500-evb
+              - asrock,e3c246d4i-bmc
+              - asrock,romed8hm3-bmc
+              - bytedance,g220a-bmc
+              - facebook,cmm-bmc
+              - facebook,minipack-bmc
+              - facebook,tiogapass-bmc
+              - facebook,yamp-bmc
+              - facebook,yosemitev2-bmc
+              - facebook,wedge400-bmc
+              - hxt,stardragon4800-rep2-bmc
+              - ibm,mihawk-bmc
+              - ibm,mowgli-bmc
+              - ibm,romulus-bmc
+              - ibm,swift-bmc
+              - ibm,witherspoon-bmc
+              - ingrasys,zaius-bmc
+              - inspur,fp5280g2-bmc
+              - inspur,nf5280m6-bmc
+              - inspur,on5263m5-bmc
+              - intel,s2600wf-bmc
+              - inventec,lanyang-bmc
+              - lenovo,hr630-bmc
+              - lenovo,hr855xg2-bmc
+              - portwell,neptune-bmc
+              - qcom,centriq2400-rep-bmc
+              - supermicro,x11spi-bmc
+              - tyan,s7106-bmc
+              - tyan,s8036-bmc
+              - yadro,nicole-bmc
+              - yadro,vegman-n110-bmc
+              - yadro,vegman-rx20-bmc
+              - yadro,vegman-sx20-bmc
+          - const: aspeed,ast2500
+
+      - description: AST2600 based boards
+        items:
+          - enum:
+              - ampere,mtmitchell-bmc
+              - aspeed,ast2600-evb
+              - aspeed,ast2600-evb-a1
+              - facebook,bletchley-bmc
+              - facebook,cloudripper-bmc
+              - facebook,elbert-bmc
+              - facebook,fuji-bmc
+              - ibm,everest-bmc
+              - ibm,rainier-bmc
+              - ibm,tacoma-bmc
+              - inventec,transformer-bmc
+              - jabil,rbp-bmc
+              - nuvia,dc-scm-bmc
+              - quanta,s6q-bmc
+          - const: aspeed,ast2600
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index c612e1f48dba..2224b18801a1 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -4,11 +4,12 @@
 $id: http://devicetree.org/schemas/arm/atmel-at91.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atmel AT91 device tree bindings.
+title: Atmel AT91.
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Ludovic Desroches <ludovic.desroches@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
 
 description: |
   Boards with a SoC of the Atmel AT91 or SMART family shall have the following
@@ -126,6 +127,13 @@ properties:
           - const: atmel,sama5d3
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D3 Ethernet Development System Board
+        items:
+          - const: microchip,sama5d3-eds
+          - const: atmel,sama5d36
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
       - description: CalAmp LMU5000 board
         items:
           - const: calamp,lmu5000
@@ -162,9 +170,11 @@ properties:
           - const: microchip,sama7g5
           - const: microchip,sama7
 
-      - description: Microchip LAN9662 PCB8291 Evaluation Board.
+      - description: Microchip LAN9662 Evaluation Boards.
         items:
-          - const: microchip,lan9662-pcb8291
+          - enum:
+              - microchip,lan9662-pcb8291
+              - microchip,lan9662-pcb8309
           - const: microchip,lan9662
           - const: microchip,lan966
 
@@ -174,6 +184,15 @@ properties:
           - const: microchip,lan9668
           - const: microchip,lan966
 
+      - description: Kontron KSwitch D10 MMT series
+        items:
+          - enum:
+              - kontron,kswitch-d10-mmt-8g
+              - kontron,kswitch-d10-mmt-6g-2gs
+          - const: kontron,s1921
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
       - items:
           - enum:
               - atmel,sams70j19
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 16eef600d599..ab1b352344ae 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -25,21 +25,6 @@ System Timer (ST) required properties:
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
-  it also can be "microchip,sam9x60-rstc"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
-		clocks = <&clk32k>;
-	};
-
 RAMC SDRAM/DDR Controller required properties:
 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
 			"atmel,at91sam9260-sdramc",
diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml
index e0d2bb71cf50..d60907e43efc 100644
--- a/Documentation/devicetree/bindings/arm/axxia.yaml
+++ b/Documentation/devicetree/bindings/arm/axxia.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/axxia.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Axxia AXM55xx device tree bindings
+title: Axxia AXM55xx
 
 maintainers:
   - Anders Berg <anders.berg@lsi.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index 5dc48241efb3..8051a75c2c79 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -51,6 +51,7 @@ properties:
               - raspberrypi,3-model-b-plus
               - raspberrypi,3-compute-module
               - raspberrypi,3-compute-module-lite
+              - raspberrypi,model-zero-2-w
           - const: brcm,bcm2837
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index 434d3c6db61e..958df32b4899 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -64,6 +64,7 @@ properties:
       - description: BCM47094 based boards
         items:
           - enum:
+              - asus,rt-ac88u
               - dlink,dir-885l
               - linksys,panamera
               - luxul,abr-4500-v1
@@ -83,9 +84,21 @@ properties:
               - brcm,bcm953012er
               - brcm,bcm953012hr
               - brcm,bcm953012k
+          - const: brcm,bcm53012
+          - const: brcm,bcm4708
+
+      - description: BCM53015 based boards
+        items:
+          - enum:
+              - meraki,mr26
+          - const: brcm,bcm53015
+          - const: brcm,bcm4708
+
+      - description: BCM53016 based boards
+        items:
+          - enum:
               - meraki,mr32
-          - const: brcm,brcm53012
-          - const: brcm,brcm53016
+          - const: brcm,bcm53016
           - const: brcm,bcm4708
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
deleted file mode 100644
index 9b745531ff04..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ /dev/null
@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM4908 device tree bindings
-
-description:
-  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-
-maintainers:
-  - Rafał Miłecki <rafal@milecki.pl>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: BCM4906 based boards
-        items:
-          - enum:
-              - netgear,r8000p
-              - tplink,archer-c2300-v1
-          - const: brcm,bcm4906
-          - const: brcm,bcm4908
-
-      - description: BCM4908 based boards
-        items:
-          - enum:
-              - asus,gt-ac5300
-              - netgear,raxe500
-          - const: brcm,bcm4908
-
-      - description: BCM49408 based boards
-        items:
-          - const: brcm,bcm49408
-          - const: brcm,bcm4908
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
index 8c7a4908a849..a8866c6e9d46 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -30,7 +30,7 @@ Example:
 
 	cpus {
 		cpu@0 {
-			compatible = "arm,cotex-a9";
+			compatible = "arm,cortex-a9";
 			reg = <0>;
 			...
 			enable-method = "brcm,bcm63138";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
new file mode 100644
index 000000000000..84866e29cab0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC device tree bindings
+
+description:
+  Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
+  chips that can be used as home gateway, router and WLAN AP for residential,
+  enterprise and carrier applications.
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Anand Gore <anand.gore@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM47622 based boards
+        items:
+          - enum:
+              - brcm,bcm947622
+          - const: brcm,bcm47622
+          - const: brcm,bcmbca
+
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - brcm,bcm94908
+              - netgear,raxe500
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4912 based boards
+        items:
+          - enum:
+              - asus,gt-ax6000
+              - brcm,bcm94912
+          - const: brcm,bcm4912
+          - const: brcm,bcmbca
+
+      - description: BCM63138 based boards
+        items:
+          - enum:
+              - brcm,bcm963138
+              - brcm,BCM963138DVT
+          - const: brcm,bcm63138
+          - const: brcm,bcmbca
+
+      - description: BCM63146 based boards
+        items:
+          - enum:
+              - brcm,bcm963146
+          - const: brcm,bcm63146
+          - const: brcm,bcmbca
+
+      - description: BCM63148 based boards
+        items:
+          - enum:
+              - brcm,bcm963148
+          - const: brcm,bcm63148
+          - const: brcm,bcmbca
+
+      - description: BCM63158 based boards
+        items:
+          - enum:
+              - brcm,bcm963158
+          - const: brcm,bcm63158
+          - const: brcm,bcmbca
+
+      - description: BCM63178 based boards
+        items:
+          - enum:
+              - brcm,bcm963178
+          - const: brcm,bcm63178
+          - const: brcm,bcmbca
+
+      - description: BCM6756 based boards
+        items:
+          - enum:
+              - brcm,bcm96756
+          - const: brcm,bcm6756
+          - const: brcm,bcmbca
+
+      - description: BCM6813 based boards
+        items:
+          - enum:
+              - brcm,bcm96813
+          - const: brcm,bcm6813
+          - const: brcm,bcmbca
+
+      - description: BCM6846 based boards
+        items:
+          - enum:
+              - brcm,bcm96846
+          - const: brcm,bcm6846
+          - const: brcm,bcmbca
+
+      - description: BCM6855 based boards
+        items:
+          - enum:
+              - brcm,bcm96855
+          - const: brcm,bcm6855
+          - const: brcm,bcmbca
+
+      - description: BCM6856 based boards
+        items:
+          - enum:
+              - brcm,bcm96856
+          - const: brcm,bcm6856
+          - const: brcm,bcmbca
+
+      - description: BCM6858 based boards
+        items:
+          - enum:
+              - brcm,bcm96858
+          - const: brcm,bcm6858
+          - const: brcm,bcmbca
+
+      - description: BCM6878 based boards
+        items:
+          - enum:
+              - brcm,bcm96878
+          - const: brcm,bcm6878
+          - const: brcm,bcmbca
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 104cc9b41df4..071421dbc4d0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -187,15 +187,8 @@ Required properties:
 Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
-Required properties:
-- compatible     : should contain one of these
-	"brcm,brcmstb-memc-ddr-rev-b.2.1"
-	"brcm,brcmstb-memc-ddr-rev-b.2.2"
-	"brcm,brcmstb-memc-ddr-rev-b.2.3"
-	"brcm,brcmstb-memc-ddr-rev-b.3.0"
-	"brcm,brcmstb-memc-ddr-rev-b.3.1"
-	"brcm,brcmstb-memc-ddr"
-- reg            : the MEMC DDR register range
+See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a
+full list of supported compatible strings and properties.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
index 90ba02be48ce..55a5a570b5bc 100644
--- a/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bitmain.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bitmain platform device tree bindings
+title: Bitmain platform
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml
index 46f78addebb0..3e9f5e1d862e 100644
--- a/Documentation/devicetree/bindings/arm/calxeda.yaml
+++ b/Documentation/devicetree/bindings/arm/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda Platforms Device Tree Bindings
+title: Calxeda Platforms
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
deleted file mode 100644
index f1de3247c1b7..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* CoreSight CPU Debug Component:
-
-CoreSight CPU debug component are compliant with the ARMv8 architecture
-reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
-external debug module is mainly used for two modes: self-hosted debug and
-external debug, and it can be accessed from mmio region from Coresight
-and eventually the debug module connects with CPU for debugging. And the
-debug module provides sample-based profiling extension, which can be used
-to sample CPU program counter, secure state and exception level, etc;
-usually every CPU has one dedicated debug module to be connected.
-
-Required properties:
-
-- compatible : should be "arm,coresight-cpu-debug"; supplemented with
-               "arm,primecell" since this driver is using the AMBA bus
-	       interface.
-
-- reg : physical base address and length of the register set.
-
-- clocks : the clock associated to this component.
-
-- clock-names : the name of the clock referenced by the code. Since we are
-                using the AMBA framework, the name of the clock providing
-		the interconnect should be "apb_pclk" and the clock is
-		mandatory. The interface between the debug logic and the
-		processor core is clocked by the internal CPU clock, so it
-		is enabled with CPU clock by default.
-
-- cpu : the CPU phandle the debug module is affined to. Do not assume it
-        to default to CPU0 if omitted.
-
-Optional properties:
-
-- power-domains: a phandle to the debug power domain. We use "power-domains"
-                 binding to turn on the debug logic if it has own dedicated
-		 power domain and if necessary to use "cpuidle.off=1" or
-		 "nohlt" in the kernel command line or sysfs node to
-		 constrain idle states to ensure registers in the CPU power
-		 domain are accessible.
-
-Example:
-
-	debug@f6590000 {
-		compatible = "arm,coresight-cpu-debug","arm,primecell";
-		reg = <0 0xf6590000 0 0x1000>;
-		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu0>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
deleted file mode 100644
index c68d93a35b6c..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ /dev/null
@@ -1,402 +0,0 @@
-* CoreSight Components:
-
-CoreSight components are compliant with the ARM CoreSight architecture
-specification and can be connected in various topologies to suit a particular
-SoCs tracing needs. These trace components can generally be classified as
-sinks, links and sources. Trace data produced by one or more sources flows
-through the intermediate links connecting the source to the currently selected
-sink. Each CoreSight component device should use these properties to describe
-its hardware characteristcs.
-
-* Required properties for all components *except* non-configurable replicators
-  and non-configurable funnels:
-
-	* compatible: These have to be supplemented with "arm,primecell" as
-	  drivers are using the AMBA bus interface.  Possible values include:
-		- Embedded Trace Buffer (version 1.0):
-			"arm,coresight-etb10", "arm,primecell";
-
-		- Trace Port Interface Unit:
-			"arm,coresight-tpiu", "arm,primecell";
-
-		- Trace Memory Controller, used for Embedded Trace Buffer(ETB),
-		  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
-		  configuration.  The configuration mode (ETB, ETF, ETR) is
-		  discovered at boot time when the device is probed.
-			"arm,coresight-tmc", "arm,primecell";
-
-		- Trace Programmable Funnel:
-			"arm,coresight-dynamic-funnel", "arm,primecell";
-			"arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
-				backward compatibility and will be removed)
-
-		- Embedded Trace Macrocell (version 3.x) and
-					Program Flow Trace Macrocell:
-			"arm,coresight-etm3x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x), with memory mapped access.
-			"arm,coresight-etm4x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x), with system register access only.
-			"arm,coresight-etm4x-sysreg";
-
-		- Coresight programmable Replicator :
-			"arm,coresight-dynamic-replicator", "arm,primecell";
-
-		- System Trace Macrocell:
-			"arm,coresight-stm", "arm,primecell"; [1]
-		- Coresight Address Translation Unit (CATU)
-			"arm,coresight-catu", "arm,primecell";
-
-		- Coresight Cross Trigger Interface (CTI):
-			"arm,coresight-cti", "arm,primecell";
-			See coresight-cti.yaml for full CTI definitions.
-
-	* reg: physical base address and length of the register
-	  set(s) of the component.
-
-	* clocks: the clocks associated to this component.
-
-	* clock-names: the name of the clocks referenced by the code.
-	  Since we are using the AMBA framework, the name of the clock
-	  providing the interconnect should be "apb_pclk", and some
-	  coresight blocks also have an additional clock "atclk", which
-	  clocks the core of that coresight component. The latter clock
-	  is optional.
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Additional required property for Embedded Trace Macrocell (version 3.x and
-  version 4.x):
-	* cpu: the cpu phandle this ETM/PTM is affined to. Do not
-	  assume it to default to CPU0 if omitted.
-
-* Additional required properties for System Trace Macrocells (STM):
-	* reg: along with the physical base address and length of the register
-	  set as described above, another entry is required to describe the
-	  mapping of the extended stimulus port area.
-
-	* reg-names: the only acceptable values are "stm-base" and
-	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
-
-* Required properties for Coresight Cross Trigger Interface (CTI)
-	See coresight-cti.yaml for full CTI definitions.
-
-* Required properties for devices that don't show up on the AMBA bus, such as
-  non-configurable replicators and non-configurable funnels:
-
-	* compatible: Currently supported value is (note the absence of the
-	  AMBA markee):
-		- Coresight Non-configurable Replicator:
-			"arm,coresight-static-replicator";
-			"arm,coresight-replicator"; (OBSOLETE. For backward
-				compatibility and will be removed)
-
-		- Coresight Non-configurable Funnel:
-			"arm,coresight-static-funnel";
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Optional properties for all components:
-
-	* arm,coresight-loses-context-with-cpu : boolean. Indicates that the
-	  hardware will lose register context on CPU power down (e.g. CPUIdle).
-	  An example of where this may be needed are systems which contain a
-	  coresight component and CPU in the same power domain. When the CPU
-	  powers down the coresight component also powers down and loses its
-	  context. This property is currently only used for the ETM 4.x driver.
-
-* Optional properties for ETM/PTMs:
-
-	* arm,cp14: must be present if the system accesses ETM/PTM management
-	  registers via co-processor 14.
-
-	* qcom,skip-power-up: boolean. Indicates that an implementation can
-	  skip powering up the trace unit. TRCPDCR.PU does not have to be set
-	  on Qualcomm Technologies Inc. systems since ETMs are in the same power
-	  domain as their CPU cores. This property is required to identify such
-	  systems with hardware errata where the CPU watchdog counter is stopped
-	  when TRCPDCR.PU is set.
-
-* Optional property for TMC:
-
-	* arm,buffer-size: size of contiguous buffer space for TMC ETR
-	  (embedded trace router). This property is obsolete. The buffer size
-	  can be configured dynamically via buffer_size property in sysfs.
-
-	* arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
-	  use the SG mode on this system.
-
-	* arm,max-burst-size: The maximum burst size initiated by TMC on the
-	  AXI master interface. The burst size can be in the range [0..15],
-	  the setting supports one data transfer per burst up to a maximum of
-	  16 data transfers per burst.
-
-* Optional property for CATU :
-	* interrupts : Exactly one SPI may be listed for reporting the address
-	  error
-
-* Optional property for configurable replicators:
-
-	* qcom,replicator-loses-context: boolean. Indicates that the replicator
-	  will lose register context when AMBA clock is removed which is observed
-	  in some replicator designs.
-
-Graph bindings for Coresight
--------------------------------
-
-Coresight components are interconnected to create a data path for the flow of
-trace data generated from the "sources" to their collection points "sink".
-Each coresight component must describe the "input" and "output" connections.
-The connections must be described via generic DT graph bindings as described
-by the "bindings/graph.txt", where each "port" along with an "endpoint"
-component represents a hardware port and the connection.
-
- * All output ports must be listed inside a child node named "out-ports"
- * All input ports must be listed inside a child node named "in-ports".
- * Port address must match the hardware port number.
-
-Example:
-
-1. Sinks
-	etb@20010000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0x20010000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port0>;
-				};
-			};
-		};
-	};
-
-	tpiu@20030000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0x20030000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				tpiu_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-	};
-
-	etr@20070000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0 0x20070000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etr_in_port: endpoint {
-					remote-endpoint = <&replicator2_out_port0>;
-				};
-			};
-		};
-
-		out-ports {
-			port {
-				etr_out_port: endpoint {
-					remote-endpoint = <&catu_in_port>;
-				};
-			};
-		};
-	};
-
-2. Links
-	replicator {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&etb_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&funnel_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel {
-		/*
-		 * non-configurable funnel don't show up on the AMBA
-		 * bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-funnel";
-		clocks = <&crg_ctrl HI3660_PCLK>;
-		clock-names = "apb_pclk";
-
-		out-ports {
-			port {
-				combo_funnel_out: endpoint {
-					remote-endpoint = <&top_funnel_in>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				combo_funnel_in0: endpoint {
-					remote-endpoint = <&cluster0_etf_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				combo_funnel_in1: endpoint {
-					remote-endpoint = <&cluster1_etf_out>;
-				};
-			};
-		};
-	};
-
-	funnel@20040000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0x20040000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel_out_port0: endpoint {
-					remote-endpoint =
-							<&replicator_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel_in_port0: endpoint {
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel_in_port1: endpoint {
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel_in_port2: endpoint {
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-		};
-	};
-
-3. Sources
-	ptm@2201c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201c000 0 0x1000>;
-
-		cpu = <&cpu0>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@2201d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201d000 0 0x1000>;
-
-		cpu = <&cpu1>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
-				};
-			};
-		};
-	};
-
-4. STM
-	stm@20100000 {
-		compatible = "arm,coresight-stm", "arm,primecell";
-		reg = <0 0x20100000 0 0x1000>,
-		      <0 0x28000000 0 0x180000>;
-		reg-names = "stm-base", "stm-stimulus-base";
-
-		clocks = <&soc_smc50mhz>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				stm_out_port: endpoint {
-					remote-endpoint = <&main_funnel_in_port2>;
-				};
-			};
-		};
-	};
-
-5. CATU
-
-	catu@207e0000 {
-		compatible = "arm,coresight-catu", "arm,primecell";
-		reg = <0 0x207e0000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		in-ports {
-			port {
-				catu_in_port: endpoint {
-					remote-endpoint = <&etr_out_port>;
-				};
-			};
-		};
-	};
-
-[1]. There is currently two version of STM: STM32 and STM500.  Both
-have the same HW interface and as such don't need an explicit binding name.
diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
index 380e21c5fc7e..cc5e190390b7 100644
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
@@ -62,8 +62,8 @@ Example 1 (ARM 64-bit, 6-cpu system, two clusters):
 The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
 are 1024 and 578 for cluster0 and cluster1. Further normalization
 is done by the operating system based on cluster0@max-freq=1100 and
-custer1@max-freq=850, final capacities are 1024 for cluster0 and
-446 for cluster1 (576*850/1100).
+cluster1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (578*850/1100).
 
 cpus {
 	#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index dfa28e3525cb..5c13b73e4d57 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -137,6 +137,10 @@ properties:
       - arm,cortex-a75
       - arm,cortex-a76
       - arm,cortex-a77
+      - arm,cortex-a78
+      - arm,cortex-a78ae
+      - arm,cortex-a510
+      - arm,cortex-a710
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -145,8 +149,12 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-x1
+      - arm,cortex-x2
       - arm,neoverse-e1
       - arm,neoverse-n1
+      - arm,neoverse-n2
+      - arm,neoverse-v1
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -166,6 +174,8 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo240
+      - qcom,kryo250
       - qcom,kryo260
       - qcom,kryo280
       - qcom,kryo385
@@ -213,6 +223,7 @@ properties:
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
           - qcom,msm8226-smp
+          - qcom,msm8909-smp
           # Only valid on ARM 32-bit, see above for ARM v8 64-bit
           - qcom,msm8916-smp
           - renesas,apmu
@@ -225,17 +236,19 @@ properties:
           - ti,am4372
 
   cpu-release-addr:
-    $ref: '/schemas/types.yaml#/definitions/uint64'
-
+    oneOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - $ref: '/schemas/types.yaml#/definitions/uint64'
     description:
+      The DT specification defines this as 64-bit always, but some 32-bit Arm
+      systems have used a 32-bit value which must be supported.
       Required for systems that have an "enable-method"
         property value of "spin-table".
-      On ARM v8 64-bit systems must be a two cell
-        property identifying a 64-bit zero-initialised
-        memory location.
 
   cpu-idle-states:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 1
     description: |
       List of phandles to idle state nodes supported
       by this cpu (see ./idle-states.yaml).
diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml
index a35de3c9e284..0cf9ddaa527e 100644
--- a/Documentation/devicetree/bindings/arm/digicolor.yaml
+++ b/Documentation/devicetree/bindings/arm/digicolor.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/digicolor.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Conexant Digicolor Platforms Device Tree Bindings
+title: Conexant Digicolor Platforms
 
 maintainers:
   - Baruch Siach <baruch@tkos.co.il>
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
deleted file mode 100644
index b5cb374dc47d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale DCFG
-
-DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-dcfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
-	dcfg: dcfg@1ee0000 {
-		compatible = "fsl,ls1021a-dcfg";
-		reg = <0x0 0x1ee0000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
deleted file mode 100644
index 0ab67b0b216d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale SCFG
-
-SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-scfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
deleted file mode 100644
index fd0061712443..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ /dev/null
@@ -1,270 +0,0 @@
-NXP i.MX System Controller Firmware (SCFW)
---------------------------------------------------------------------
-
-The System Controller Firmware (SCFW) is a low-level system function
-which runs on a dedicated Cortex-M core to provide power, clock, and
-resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
-(QM, QP), and i.MX8QX (QXP, DX).
-
-The AP communicates with the SC using a multi-ported MU module found
-in the LSIO subsystem. The current definition of this MU module provides
-5 remote AP connections to the SC to support up to 5 execution environments
-(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
-with the LSIO DSC IP bus. The SC firmware will communicate with this MU
-using the MSI bus.
-
-System Controller Device Node:
-============================================================
-
-The scu node with the following properties shall be under the /firmware/ node.
-
-Required properties:
--------------------
-- compatible:	should be "fsl,imx-scu".
-- mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
-			       "rx0", "rx1", "rx2", "rx3";
-		include "gip3" if want to support general MU interrupt.
-- mboxes:	List of phandle of 4 MU channels for tx, 4 MU channels for
-		rx, and 1 optional MU channel for general interrupt.
-		All MU channels must be in the same MU instance.
-		Cross instances are not allowed. The MU instance can only
-		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
-		to make sure use the one which is not conflict with other
-		execution environments. e.g. ATF.
-		Note:
-		Channel 0 must be "tx0" or "rx0".
-		Channel 1 must be "tx1" or "rx1".
-		Channel 2 must be "tx2" or "rx2".
-		Channel 3 must be "tx3" or "rx3".
-		General interrupt rx channel must be "gip3".
-		e.g.
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
-		for detailed mailbox binding.
-
-Note: Each mu which supports general interrupt should have an alias correctly
-numbered in "aliases" node.
-e.g.
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-i.MX SCU Client Device Node:
-============================================================
-
-Client nodes are maintained as children of the relevant IMX-SCU device node.
-
-Power domain bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding for the SCU power domain providers uses the generic power
-domain binding[2].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-scu-pd",
-			  "fsl,imx8qxp-scu-pd"
-			followed by "fsl,scu-pd"
-
-- #power-domain-cells:	Must be 1. Contains the Resource ID used by
-			SCU commands.
-			See detailed Resource ID list from:
-			include/dt-bindings/firmware/imx/rsrc.h
-
-Clock bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-clk"
-			  "fsl,imx8qxp-clk"
-			followed by "fsl,scu-clk"
-- #clock-cells:		Should be 2.
-			Contains the Resource and Clock ID value.
-- clocks:		List of clock specifiers, must contain an entry for
-			each required entry in clock-names
-- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Pinctrl bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the i.MX common pinctrl binding[3].
-
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-iomuxc",
-			"fsl,imx8qxp-iomuxc",
-			"fsl,imx8dxl-iomuxc".
-
-Required properties for Pinctrl sub nodes:
-- fsl,pins:		Each entry consists of 3 integers which represents
-			the mux and config setting for one pin. The first 2
-			integers <pin_id mux_mode> are specified using a
-			PIN_FUNC_ID macro, which can be found in
-			<dt-bindings/pinctrl/pads-imx8qm.h>,
-			<dt-bindings/pinctrl/pads-imx8qxp.h>,
-			<dt-bindings/pinctrl/pads-imx8dxl.h>.
-			The last integer CONFIG is the pad setting value like
-			pull-up on this pin.
-
-			Please refer to i.MX8QXP Reference Manual for detailed
-			CONFIG settings.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
-
-RTC bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be "fsl,imx8qxp-sc-rtc";
-
-OCOTP bindings based on SCU Message Protocol
-------------------------------------------------------------
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-scu-ocotp",
-			"fsl,imx8qxp-scu-ocotp".
-- #address-cells:	Must be 1. Contains byte index
-- #size-cells:		Must be 1. Contains byte length
-
-Optional Child nodes:
-
-- Data cells of ocotp:
-  Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Watchdog bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-wdt"
-              followed by "fsl,imx-sc-wdt";
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-SCU key bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-key"
-              followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Thermal bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible:			Should be :
-				  "fsl,imx8qxp-sc-thermal"
-				followed by "fsl,imx-sc-thermal";
-
-- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
-				for a description.
-
-Example (imx8qxp):
--------------
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-lsio_mu1: mailbox@5d1c0000 {
-	...
-	#mbox-cells = <2>;
-};
-
-firmware {
-	scu {
-		compatible = "fsl,imx-scu";
-		mbox-names = "tx0", "tx1", "tx2", "tx3",
-			     "rx0", "rx1", "rx2", "rx3",
-			     "gip3";
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-
-		clk: clk {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
-			#clock-cells = <2>;
-		};
-
-		iomuxc {
-			compatible = "fsl,imx8qxp-iomuxc";
-
-			pinctrl_lpuart0: lpuart0grp {
-				fsl,pins = <
-					SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
-					SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
-				>;
-			};
-			...
-		};
-
-		ocotp: imx8qx-ocotp {
-			compatible = "fsl,imx8qxp-scu-ocotp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			fec_mac0: mac@2c4 {
-				reg = <0x2c4 8>;
-			};
-		};
-
-		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
-			#power-domain-cells = <1>;
-		};
-
-		rtc: rtc {
-			compatible = "fsl,imx8qxp-sc-rtc";
-		};
-
-		scu_key: scu-key {
-			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycodes = <KEY_POWER>;
-		};
-
-		watchdog {
-			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
-			timeout-sec = <60>;
-		};
-
-		tsens: thermal-sensor {
-			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-};
-
-serial@5a060000 {
-	...
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
-	clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
-	clock-names = "ipg";
-	power-domains = <&pd IMX_SC_R_UART_0>;
-};
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 97f6eebad76a..fbfc4f99c01e 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/fsl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Platforms Device Tree Bindings
+title: Freescale i.MX Platforms
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -172,7 +172,7 @@ properties:
               - karo,tx53                     # Ka-Ro electronics TX53 module
               - kiebackpeter,imx53-ddc        # K+P imx53 DDC
               - kiebackpeter,imx53-hsc        # K+P imx53 HSC
-              - menlo,m53menlo
+              - menlo,m53menlo                # i.MX53 Menlo board
               - voipac,imx53-dmm-668          # Voipac i.MX53 X53-DMM-668
           - const: fsl,imx53
 
@@ -192,6 +192,7 @@ properties:
         items:
           - enum:
               - auvidea,h100              # Auvidea H100
+              - bosch,imx6q-acc           # Bosch ACC i.MX6 Dual
               - boundary,imx6q-nitrogen6_max
               - boundary,imx6q-nitrogen6_som2
               - boundary,imx6q-nitrogen6x
@@ -320,6 +321,7 @@ properties:
           - enum:
               - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
               - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
               - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
@@ -411,7 +413,6 @@ properties:
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
               - toradex,colibri_imx6dl      # Colibri iMX6 Modules
-              - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules
               - udoo,imx6dl-udoo          # Udoo i.MX6 Dual-lite Board
               - vdl,lanmcu                # Van der Laan LANMCU board
               - wand,imx6dl-wandboard     # Wandboard i.MX6 Dual Lite Board
@@ -488,17 +489,13 @@ properties:
       - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
         items:
           - enum:
+              - toradex,colibri_imx6dl-aster        # Colibri iMX6DL/S Module on Aster Board
               - toradex,colibri_imx6dl-eval-v3      # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl-iris         # Colibri iMX6DL/S Module on Iris Board
+              - toradex,colibri_imx6dl-iris-v2      # Colibri iMX6DL/S Module on Iris Board V2
           - const: toradex,colibri_imx6dl           # Colibri iMX6DL/S Module
           - const: fsl,imx6dl
 
-      - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules
-        items:
-          - enum:
-              - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3
-          - const: toradex,colibri_imx6dl-v1_1      # Colibri iMX6DL/S V1.1 Module
-          - const: fsl,imx6dl
-
       - description: i.MX6S DHCOM DRC02 Board
         items:
           - const: dh,imx6s-dhcom-drc02
@@ -557,8 +554,7 @@ properties:
               - engicam,imx6ul-isiot      # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - karo,imx6ul-tx6ul         # Ka-Ro electronics TXUL-0010 Module
-              - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
-              - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - kontron,sl-imx6ul         # Kontron SL i.MX6UL SoM
               - prt,prti6g                # Protonic PRTI6G Board
               - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
               - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
@@ -594,23 +590,39 @@ properties:
           - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S Board
+      - description: Kontron BL i.MX6UL (N631X S) Board
+        items:
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: Kontron BL i.MX6UL 43 (N631X S 43) Board
+        items:
+          - const: kontron,bl-imx6ul-43    # Kontron BL i.MX6UL Carrier Board with 4.3" Display
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
         items:
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - enum:
+              - tq,imx6ul-tqma6ul1-mba6ulx
+          - const: tq,imx6ul-tqma6ul1      # MCIMX6G1
           - const: fsl,imx6ul
 
-      - description: Kontron N6311 S Board
+      - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board
         items:
-          - const: kontron,imx6ul-n6311-s
-          - const: kontron,imx6ul-n6311-som
+          - enum:
+              - tq,imx6ul-tqma6ul2-mba6ulx
+          - const: tq,imx6ul-tqma6ul2      # MCIMX6G2
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S 43 Board
+      - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board
         items:
-          - const: kontron,imx6ul-n6310-s-43
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - enum:
+              - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter
+              - tq,imx6ul-tqma6ul2l-mba6ulxl
+          - const: tq,imx6ul-tqma6ul2l      # MCIMX6G2, LGA SoM variant
           - const: fsl,imx6ul
 
       - description: i.MX6ULL based Boards
@@ -618,7 +630,7 @@ properties:
           - enum:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
               - joz,jozacp                # JOZ Access Point
-              - kontron,imx6ull-n6411-som # Kontron N6411 SOM
+              - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
               - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
               - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
@@ -640,31 +652,64 @@ properties:
           - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL PHYTEC phyGATE-Tauri
+        items:
+          - enum:
+              - phytec,imx6ull-phygate-tauri-emmc
+              - phytec,imx6ull-phygate-tauri-nand
+          - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063        # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
         items:
           - enum:
-              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Evaluation Board
+              - toradex,colibri-imx6ull-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-eval      # Colibri Evaluation Board V3
+              - toradex,colibri-imx6ull-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-iris-v2   # Iris V2 Carrier Board
           - const: toradex,colibri-imx6ull        # Colibri iMX6ULL Module
-          - const: fsl,imx6dl
+          - const: fsl,imx6ull
 
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
         items:
           - enum:
-              - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board
-          - const: toradex,colibri-imx6ull-emmc   # Colibri iMX6ULL 1GB (eMMC) Module
-          - const: fsl,imx6dl
+              - toradex,colibri-imx6ull-emmc-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-emmc-eval      # Colibri Evaluation B. V3
+              - toradex,colibri-imx6ull-emmc-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-emmc-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-emmc        # Colibri iMX6ULL 1GB (eMMC) Module
+          - const: fsl,imx6ull
 
       - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
         items:
           - enum:
-              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board
-          - const: toradex,colibri-imx6ull-wifi   # Colibri iMX6ULL Wi-Fi / BT Module
-          - const: fsl,imx6dl
+              - toradex,colibri-imx6ull-wifi-eval     # Colibri Eval. B. V3
+              - toradex,colibri-imx6ull-wifi-aster    # Aster Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris     # Iris Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris-v2  # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-wifi       # Colibri iMX6ULL Wi-Fi / BT Module
+          - const: fsl,imx6ull
+
+      - description: Kontron BL i.MX6ULL (N6411 S) Board
+        items:
+          - const: kontron,bl-imx6ull   # Kontron BL i.MX6ULL Carrier Board
+          - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
+          - const: fsl,imx6ull
+
+      - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2-mba6ulx
+          - const: tq,imx6ull-tqma6ull2      # MCIMX6Y2
+          - const: fsl,imx6ull
 
-      - description: Kontron N6411 S Board
+      - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
         items:
-          - const: kontron,imx6ull-n6411-s
-          - const: kontron,imx6ull-n6411-som
+          - enum:
+              - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
+              - tq,imx6ull-tqma6ull2l-mba6ulxl
+          - const: tq,imx6ull-tqma6ull2l      # MCIMX6Y2, LGA SoM variant
           - const: fsl,imx6ull
 
       - description: i.MX6ULZ based Boards
@@ -687,6 +732,8 @@ properties:
           - enum:
               - toradex,colibri-imx7s-aster     # Module on Aster Carrier Board
               - toradex,colibri-imx7s-eval-v3   # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7s-iris      # Module on Iris Carrier Board
+              - toradex,colibri-imx7s-iris-v2   # Module on Iris Carrier Board V2
           - const: toradex,colibri-imx7s
           - const: fsl,imx7s
 
@@ -707,6 +754,7 @@ properties:
               - kam,imx7d-flex-concentrator-mfg   # Kamstrup OMNIA Flex Concentrator in manufacturing mode
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
               - remarkable,imx7d-remarkable2  # i.MX7D ReMarkable 2 E-Ink Tablet
+              - storopack,imx7d-smegw01       # Storopack i.MX7D SMEGW01
               - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
               - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
               - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
@@ -737,8 +785,10 @@ properties:
       - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
         items:
           - enum:
-              - toradex,colibri-imx7d-aster   # Colibri iMX7D Module on Aster Carrier Board
-              - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-aster   # Aster Carrier Board
+              - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-iris    # Iris Carrier Board
+              - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2
           - const: toradex,colibri-imx7d
           - const: fsl,imx7d
 
@@ -747,6 +797,8 @@ properties:
           - enum:
               - toradex,colibri-imx7d-emmc-aster    # Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc-eval-v3  # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-iris     # Module on Iris Carrier Board
+              - toradex,colibri-imx7d-emmc-iris-v2  # Module on Iris Carrier Board V2
           - const: toradex,colibri-imx7d-emmc
           - const: fsl,imx7d
 
@@ -762,15 +814,25 @@ properties:
           - enum:
               - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
               - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
+              - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
+              - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
-              - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
+              - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
+              - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
+              - menlo,mx8menlo            # i.MX8MM Menlo board with Verdin SoM
+              - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
+              - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mm-wifi  # Verdin iMX8M Mini Wi-Fi / BT Modules
               - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
       - description: Engicam i.Core MX8M Mini SoM based boards
@@ -783,8 +845,38 @@ properties:
 
       - description: Kontron BL i.MX8MM (N801X S) Board
         items:
-          - const: kontron,imx8mm-n801x-s
-          - const: kontron,imx8mm-n801x-som
+          - const: kontron,imx8mm-bl
+          - const: kontron,imx8mm-sl
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM OSM-S (N802X S) Board
+        items:
+          - const: kontron,imx8mm-bl-osm-s
+          - const: kontron,imx8mm-osm-s
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
+              - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+          - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+          - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: PHYTEC phyCORE-i.MX8MM SoM based boards
+        items:
+          - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK
+          - const: phytec,imx8mm-phycore-som        # phyCORE-i.MX8MM SoM
           - const: fsl,imx8mm
 
       - description: Variscite VAR-SOM-MX8MM based boards
@@ -810,6 +902,7 @@ properties:
               - beacon,imx8mn-beacon-kit  # i.MX8MN Beacon Development Kit
               - bsh,imx8mn-bsh-smm-s2     # i.MX8MN BSH SystemMaster S2
               - bsh,imx8mn-bsh-smm-s2pro  # i.MX8MN BSH SystemMaster S2 PRO
+              - fsl,imx8mn-ddr3l-evk      # i.MX8MN DDR3L EVK Board
               - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
               - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
@@ -835,7 +928,27 @@ properties:
       - description: i.MX8MP based Boards
         items:
           - enum:
+              - dh,imx8mp-dhcom-som       # i.MX8MP DHCOM SoM
+              - dh,imx8mp-dhcom-pdk2      # i.MX8MP DHCOM SoM on PDK2 board
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
+              - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
+              - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
+          - const: fsl,imx8mp
+
+      - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+        items:
+          - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+          - const: avnet,sm2s-imx8mp-14N0600E     # 14N0600E variant of SM2S-IMX8PLUS SoM
+          - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
+          - const: fsl,imx8mp
+
+      - description: Engicam i.Core MX8M Plus SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mp-edimm2.2       # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mp             # i.MX8MP Engicam i.Core MX8M Plus SoM
           - const: fsl,imx8mp
 
       - description: PHYTEC phyCORE-i.MX8MP SoM based boards
@@ -844,6 +957,36 @@ properties:
           - const: phytec,imx8mp-phycore-som         # phyCORE-i.MX8MP SoM
           - const: fsl,imx8mp
 
+      - description: Toradex Boards with Verdin iMX8M Plus Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
+              - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+          - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+          - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description:
+          TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All CPU variants use the same device tree hence only one compatible
+          is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed
+          version as an industrial computing device.
+        items:
+          - enum:
+              - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+          - const: tq,imx8mp-tqma8mpql       # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
@@ -899,6 +1042,12 @@ properties:
               - toradex,colibri-imx8x     # Colibri iMX8X Modules
           - const: fsl,imx8qxp
 
+      - description: i.MX8DXL based Boards
+        items:
+          - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
+          - const: fsl,imx8dxl
+
       - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules
         items:
           - enum:
@@ -912,6 +1061,12 @@ properties:
               - fsl,imx8ulp-evk           # i.MX8ULP EVK Board
           - const: fsl,imx8ulp
 
+      - description: i.MX93 based Boards
+        items:
+          - enum:
+              - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
@@ -975,6 +1130,7 @@ properties:
       - description: LS1021A based Boards
         items:
           - enum:
+              - fsl,ls1021a-iot
               - fsl,ls1021a-moxa-uc-8410a
               - fsl,ls1021a-qds
               - fsl,ls1021a-tsn
diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt
deleted file mode 100644
index fd54e1db2156..000000000000
--- a/Documentation/devicetree/bindings/arm/fw-cfg.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* QEMU Firmware Configuration bindings for ARM
-
-QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
-provide the following Firmware Configuration interface on the "virt" machine
-type:
-
-- A write-only, 16-bit wide selector (or control) register,
-- a read-write, 64-bit wide data register.
-
-QEMU exposes the control and data register to ARM guests as memory mapped
-registers; their location is communicated to the guest's UEFI firmware in the
-DTB that QEMU places at the bottom of the guest's DRAM.
-
-The authoritative guest-side hardware interface documentation to the fw_cfg
-device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
-
-
-Required properties:
-
-- compatible: "qemu,fw-cfg-mmio".
-
-- reg: the MMIO region used by the device.
-  * Bytes 0x0 to 0x7 cover the data register.
-  * Bytes 0x8 to 0x9 cover the selector register.
-  * Further registers may be appended to the region in case of future interface
-    revisions / feature bits.
-
-Example:
-
-/ {
-	#size-cells = <0x2>;
-	#address-cells = <0x2>;
-
-	fw-cfg@9020000 {
-		compatible = "qemu,fw-cfg-mmio";
-		reg = <0x0 0x9020000 0x0 0xa>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
index 7378159e61df..483caf0ce25b 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -17,14 +17,15 @@ properties:
       - const: hisilicon,hip04-bootwrapper
 
   boot-method:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       Address and size of boot method.
       [0]: bootwrapper physical address
       [1]: bootwrapper size
       [2]: relocation physical address
       [3]: relocation size
-    minItems: 1
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/arm/hpe,gxp.yaml b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
new file mode 100644
index 000000000000..224bbcb93f95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE BMC GXP platforms
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: GXP Based Boards
+        items:
+          - enum:
+              - hpe,gxp-dl360gen10
+          - const: hpe,gxp
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
index 107e686ab207..53d2ce02b207 100644
--- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Keem Bay platform device tree bindings
+title: Keem Bay platform
 
 maintainers:
   - Paul J. Murphy <paul.j.murphy@intel.com>
diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
new file mode 100644
index 000000000000..4b4dcf551eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA platform
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: AgileX boards
+        items:
+          - enum:
+              - intel,n5x-socdk
+              - intel,socfpga-agilex-n6000
+              - intel,socfpga-agilex-socdk
+          - const: intel,socfpga-agilex
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index 230bffeec0e5..553dcbc70e35 100644
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel IXP4xx Device Tree Bindings
+title: Intel IXP4xx
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
new file mode 100644
index 000000000000..c7c5eb48fc7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/linux,dummy-virt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU virt machine
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    const: linux,dummy-virt
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index 052a967c1f28..c83245065d44 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -72,7 +72,7 @@ mpp19	19	gpio, uart0(rxd), sdio(pw_off)
 GPIO:
 -----
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
index f6d6642d81c0..29fa93dad52b 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
@@ -1,21 +1,3 @@
-Marvell Armada 37xx Platforms Device Tree Bindings
---------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 37xx family must carry the
-following root node property:
-
- - compatible: must contain "marvell,armada3710"
-
-In addition, boards using the Marvell Armada 3720 SoC shall have the
-following property before the previous one:
-
- - compatible: must contain "marvell,armada3720"
-
-Example:
-
-compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
-
-
 Power management
 ----------------
 
@@ -48,11 +30,3 @@ avs: avs@11500 {
 	compatible = "marvell,armada-3700-avs", "syscon";
 	reg = <0x11500 0x40>;
 }
-
-
-CZ.NIC's Turris Mox SOHO router Device Tree Bindings
-----------------------------------------------------
-
-Required root node property:
-
- - compatible: must contain "cznic,turris-mox"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
new file mode 100644
index 000000000000..6905d29f3108
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-37xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx Platforms
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Armada 3720 SoC boards
+        items:
+          - enum:
+              - cznic,turris-mox
+              - globalscale,espressobin
+              - marvell,armada-3720-db
+              - methode,edpu
+              - methode,udpu
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin boards
+        items:
+          - enum:
+              - globalscale,espressobin-emmc
+              - globalscale,espressobin-ultra
+              - globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin V7 boards
+        items:
+          - enum:
+              - globalscale,espressobin-v7-emmc
+          - const: globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
index 0705e765f432..d84105c7c935 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -156,7 +156,7 @@ GPIO:
 -----
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
new file mode 100644
index 000000000000..8960fb8b2b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alleycat5/5X Platforms
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Alleycat5 (98DX25xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5
+          - const: marvell,ac5
+
+      - description: Alleycat5X (98DX35xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5x
+          - const: marvell,ac5x
+          - const: marvell,ac5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 0ffe1acf1344..d76ce4c3819d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mediatek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek SoC based Platforms Device Tree Bindings
+title: MediaTek SoC based Platforms
 
 maintainers:
   - Sean Wang <sean.wang@mediatek.com>
@@ -32,6 +32,10 @@ properties:
           - const: mediatek,mt6580
       - items:
           - enum:
+              - prestigio,pmt5008-3g
+          - const: mediatek,mt6582
+      - items:
+          - enum:
               - fairphone,fp1
               - mundoreader,bq-aquaris5
           - const: mediatek,mt6589
@@ -127,8 +131,43 @@ properties:
           - enum:
               - mediatek,mt8183-evb
           - const: mediatek,mt8183
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - items:
+          - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
       - items:
           - enum:
+              - mediatek,mt8195-demo
               - mediatek,mt8195-evb
           - const: mediatek,mt8195
       - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
deleted file mode 100644
index ea827e8763de..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Mediatek apmixedsys controller
-==============================
-
-The Mediatek apmixedsys controller provides the PLLs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt2712-apmixedsys", "syscon"
-	- "mediatek,mt6765-apmixedsys", "syscon"
-	- "mediatek,mt6779-apmixedsys", "syscon"
-	- "mediatek,mt6797-apmixedsys"
-	- "mediatek,mt7622-apmixedsys"
-	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt7629-apmixedsys"
-	- "mediatek,mt8135-apmixedsys"
-	- "mediatek,mt8167-apmixedsys", "syscon"
-	- "mediatek,mt8173-apmixedsys"
-	- "mediatek,mt8183-apmixedsys", "syscon"
-	- "mediatek,mt8516-apmixedsys"
-- #clock-cells: Must be 1
-
-The apmixedsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-apmixedsys: clock-controller@10209000 {
-	compatible = "mediatek,mt8173-apmixedsys";
-	reg = <0 0x10209000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 6b7e8067e7aa..0502db73686b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
deleted file mode 100644
index eb3523c7a7be..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Mediatek infracfg controller
-============================
-
-The Mediatek infracfg controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt2712-infracfg", "syscon"
-	- "mediatek,mt6765-infracfg", "syscon"
-	- "mediatek,mt6779-infracfg_ao", "syscon"
-	- "mediatek,mt6797-infracfg", "syscon"
-	- "mediatek,mt7622-infracfg", "syscon"
-	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt7629-infracfg", "syscon"
-	- "mediatek,mt8135-infracfg", "syscon"
-	- "mediatek,mt8167-infracfg", "syscon"
-	- "mediatek,mt8173-infracfg", "syscon"
-	- "mediatek,mt8183-infracfg", "syscon"
-	- "mediatek,mt8516-infracfg", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The infracfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-Also it uses the common reset controller binding from
-Documentation/devicetree/bindings/reset/reset.txt.
-The available reset outputs are defined in
-dt-bindings/reset/mt*-resets.h
-
-Example:
-
-infracfg: power-controller@10001000 {
-	compatible = "mediatek,mt8173-infracfg", "syscon";
-	reg = <0 0x10001000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
new file mode 100644
index 000000000000..1d7c837d9378
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Infrastructure System Configuration Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The Mediatek infracfg controller provides various clocks and reset outputs
+  to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>,
+  and reset values in <dt-bindings/reset/mt*-reset.h> and
+  <dt-bindings/reset/mt*-resets.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-infracfg
+              - mediatek,mt2712-infracfg
+              - mediatek,mt6765-infracfg
+              - mediatek,mt6795-infracfg
+              - mediatek,mt6779-infracfg_ao
+              - mediatek,mt6797-infracfg
+              - mediatek,mt7622-infracfg
+              - mediatek,mt7629-infracfg
+              - mediatek,mt7986-infracfg
+              - mediatek,mt8135-infracfg
+              - mediatek,mt8167-infracfg
+              - mediatek,mt8173-infracfg
+              - mediatek,mt8183-infracfg
+              - mediatek,mt8516-infracfg
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-infracfg
+          - const: mediatek,mt2701-infracfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2701-infracfg
+          - mediatek,mt2712-infracfg
+          - mediatek,mt6795-infracfg
+          - mediatek,mt7622-infracfg
+          - mediatek,mt7986-infracfg
+          - mediatek,mt8135-infracfg
+          - mediatek,mt8173-infracfg
+          - mediatek,mt8183-infracfg
+then:
+  required:
+    - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    infracfg: clock-controller@10001000 {
+        compatible = "mediatek,mt8173-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 763c62323a74..eb451bec23d3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -25,11 +25,14 @@ properties:
               - mediatek,mt2712-mmsys
               - mediatek,mt6765-mmsys
               - mediatek,mt6779-mmsys
+              - mediatek,mt6795-mmsys
               - mediatek,mt6797-mmsys
               - mediatek,mt8167-mmsys
               - mediatek,mt8173-mmsys
               - mediatek,mt8183-mmsys
+              - mediatek,mt8186-mmsys
               - mediatek,mt8192-mmsys
+              - mediatek,mt8195-mmsys
               - mediatek,mt8365-mmsys
           - const: syscon
       - items:
@@ -40,6 +43,31 @@ properties:
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings
+      of the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mboxes:
+    description:
+      Using mailbox to communicate with GCE, it should have this
+      property and list of phandle, mailbox specifiers. See
+      Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
   "#clock-cells":
     const: 1
 
@@ -55,9 +83,16 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
     mmsys: syscon@14000000 {
         compatible = "mediatek,mt8173-mmsys", "syscon";
         reg = <0x14000000 0x1000>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+        mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+                 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
new file mode 100644
index 000000000000..9fbeb626ab23
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek PCIE Mirror Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek PCIE mirror provides a configuration interface for PCIE
+  controller on MT7622 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-pcie-mirror
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_mirror: pcie-mirror@10000400 {
+        compatible = "mediatek,mt7622-pcie-mirror", "syscon";
+        reg = <0 0x10000400 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
new file mode 100644
index 000000000000..84fb0a146b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Wireless Ethernet Dispatch Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek wireless ethernet dispatch controller can be configured to
+  intercept and handle access to the WLAN DMA queues and PCIe interrupts
+  and implement hardware flow offloading from ethernet to WLAN.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-wed
+          - mediatek,mt7986-wed
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed0: wed@1020a000 {
+        compatible = "mediatek,mt7622-wed","syscon";
+        reg = <0 0x1020a000 0 0x1000>;
+        interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
new file mode 100644
index 000000000000..96221f51c1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek PCIE WED Controller for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek WED PCIE provides a configuration interface for PCIE
+  controller on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wed-pcie
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed_pcie: wed-pcie@10003000 {
+        compatible = "mediatek,mt7986-wed-pcie",
+                     "syscon";
+        reg = <0 0x10003000 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
new file mode 100644
index 000000000000..cf1002c3efa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Functional Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-imp_iic_wrap
+          - mediatek,mt8186-mfgsys
+          - mediatek,mt8186-wpesys
+          - mediatek,mt8186-imgsys1
+          - mediatek,mt8186-imgsys2
+          - mediatek,mt8186-vdecsys
+          - mediatek,mt8186-vencsys
+          - mediatek,mt8186-camsys
+          - mediatek,mt8186-camsys_rawa
+          - mediatek,mt8186-camsys_rawb
+          - mediatek,mt8186-mdpsys
+          - mediatek,mt8186-ipesys
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imp_iic_wrap: clock-controller@11017000 {
+        compatible = "mediatek,mt8186-imp_iic_wrap";
+        reg = <0x11017000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
new file mode 100644
index 000000000000..661047d26e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek System Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-mcusys
+          - mediatek,mt8186-topckgen
+          - mediatek,mt8186-infracfg_ao
+          - mediatek,mt8186-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8186-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
index c8c67c033f8c..b57cc2e69efb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
@@ -24,7 +24,6 @@ properties:
           - mediatek,mt8192-imp_iic_wrap_w
           - mediatek,mt8192-imp_iic_wrap_n
           - mediatek,mt8192-msdc_top
-          - mediatek,mt8192-msdc
           - mediatek,mt8192-mfgcfg
           - mediatek,mt8192-imgsys
           - mediatek,mt8192-imgsys2
@@ -108,13 +107,6 @@ examples:
     };
 
   - |
-    msdc: clock-controller@11f60000 {
-        compatible = "mediatek,mt8192-msdc";
-        reg = <0x11f60000 0x1000>;
-        #clock-cells = <1>;
-    };
-
-  - |
     mfgcfg: clock-controller@13fbf000 {
         compatible = "mediatek,mt8192-mfgcfg";
         reg = <0x13fbf000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
index 5705bcf1fe47..27f79175c678 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
@@ -29,6 +29,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
index 57a1503d95fe..95b6bdf99936 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
@@ -37,6 +37,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
index 8723dfe34bab..ef62cbb13590 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -21,11 +21,14 @@ properties:
               - mediatek,mt2701-pericfg
               - mediatek,mt2712-pericfg
               - mediatek,mt6765-pericfg
+              - mediatek,mt6795-pericfg
               - mediatek,mt7622-pericfg
               - mediatek,mt7629-pericfg
               - mediatek,mt8135-pericfg
               - mediatek,mt8173-pericfg
               - mediatek,mt8183-pericfg
+              - mediatek,mt8186-pericfg
+              - mediatek,mt8195-pericfg
               - mediatek,mt8516-pericfg
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index 30cb645c0e54..29ca7a10b315 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -8,6 +8,8 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
+	- "mediatek,mt7986-sgmiisys_0", "syscon"
+	- "mediatek,mt7986-sgmiisys_1", "syscon"
 - #clock-cells: Must be 1
 
 The SGMIISYS controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
deleted file mode 100644
index 5ce7578cf274..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Mediatek topckgen controller
-============================
-
-The Mediatek topckgen controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-topckgen"
-	- "mediatek,mt2712-topckgen", "syscon"
-	- "mediatek,mt6765-topckgen", "syscon"
-	- "mediatek,mt6779-topckgen", "syscon"
-	- "mediatek,mt6797-topckgen"
-	- "mediatek,mt7622-topckgen"
-	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
-	- "mediatek,mt7629-topckgen"
-	- "mediatek,mt8135-topckgen"
-	- "mediatek,mt8167-topckgen", "syscon"
-	- "mediatek,mt8173-topckgen"
-	- "mediatek,mt8183-topckgen", "syscon"
-	- "mediatek,mt8516-topckgen"
-- #clock-cells: Must be 1
-
-The topckgen controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-topckgen: power-controller@10000000 {
-	compatible = "mediatek,mt8173-topckgen";
-	reg = <0 0x10000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
index 6193388c6318..9a0d54e9799c 100644
--- a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip Sparx5 Boards Device Tree Bindings
+title: Microchip Sparx5 Boards
 
 maintainers:
   - Lars Povlsen <lars.povlsen@microchip.com>
diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml
index 670d24ce8ec5..42565280914c 100644
--- a/Documentation/devicetree/bindings/arm/moxart.yaml
+++ b/Documentation/devicetree/bindings/arm/moxart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/moxart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MOXA ART device tree bindings
+title: MOXA ART
 
 maintainers:
   - Jonas Jensen <jonas.jensen@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
index 6ce0b212ec6d..606b4b1b709d 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
@@ -81,4 +81,4 @@ Example:
 		};
 	};
 
-[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
+[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
index 03882aac8d2d..5ea506412b4e 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -23,10 +23,14 @@ properties:
     enum:
       - qcom,sc7180-llcc
       - qcom,sc7280-llcc
+      - qcom,sc8180x-llcc
+      - qcom,sc8280xp-llcc
       - qcom,sdm845-llcc
       - qcom,sm6350-llcc
       - qcom,sm8150-llcc
       - qcom,sm8250-llcc
+      - qcom,sm8350-llcc
+      - qcom,sm8450-llcc
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
index 94d50a949be1..c0e3c3a42bea 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -10,7 +10,7 @@ system, notifying them when a low power state is entered or exited.
 Multiple revisions of the SAW hardware are supported using these Device Nodes.
 SAW2 revisions differ in the register offset and configuration data. Also, the
 same revision of the SAW in different SoCs may have different configuration
-data due the the differences in hardware capabilities. Hence the SoC name, the
+data due the differences in hardware capabilities. Hence the SoC name, the
 version of the SAW hardware in that SoC and the distinction between cpu (big
 or Little) or cache, may be needed to uniquely identify the SAW register
 configuration and initialization data. The compatible string is used to
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
index a316eef1b728..8892eb6bd3ef 100644
--- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -23,8 +23,12 @@ properties:
       - description: infinity2m boards
         items:
           - enum:
+              - 100ask,dongshanpione # 100ask DongShanPiOne
               - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
               - m5stack,unitv2 # M5Stack UnitV2
+              - miyoo,miyoo-mini # Miyoo Mini
+              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
+              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
           - const: mstar,infinity2m
 
       - description: infinity3 boards
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
index 95e51378089c..43409e5721d5 100644
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
@@ -8,6 +8,7 @@ title: NPCM Platforms Device Tree Bindings
 
 maintainers:
   - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
 
 properties:
   $nodename:
@@ -26,4 +27,10 @@ properties:
               - nuvoton,npcm750-evb         # NPCM750 evaluation board
           - const: nuvoton,npcm750
 
+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
new file mode 100644
index 000000000000..94e72f25b331
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Global Control Registers block in Nuvoton SoCs
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
+  that expose misc functionality such as chip model and version information or
+  pinmux settings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,wpcm450-gcr
+          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    gcr: syscon@800000 {
+      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+      reg = <0x800000 0x1000>;
+
+      mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x38 0x07>;
+        idle-states = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
index c9675c4cdc1b..b6f57d79a753 100644
--- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
+++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: NVIDIA Tegra194 CPU Complex device tree bindings
+title: NVIDIA Tegra194 CPU Complex
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 3eb6d7afff14..431ef8c56a13 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -31,12 +31,17 @@ Required properties:
 		(base address and length)
 - clocks:	clocks for this module
 - clockdomains:	clockdomains for this module
+- #clock-cells: From common clock binding
+- clock-output-names: From common clock binding
+
 
 Example:
 
-cm: cm@48004000 {
+cm: clock@48004000 {
 	compatible = "ti,omap3-cm";
 	reg = <0x48004000 0x4000>;
+	#clock-cells = <0>;
+	clock-output-names = "cm";
 
 	cm_clocks: clocks {
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index e17ac049e890..dbb6f3dc5ae5 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -20,6 +20,8 @@ properties:
     items:
       - enum:
           - apm,potenza-pmu
+          - apple,firestorm-pmu
+          - apple,icestorm-pmu
           - arm,armv8-pmuv3 # Only for s/w models
           - arm,arm1136-pmu
           - arm,arm1176-pmu
@@ -44,10 +46,18 @@ properties:
           - arm,cortex-a76-pmu
           - arm,cortex-a77-pmu
           - arm,cortex-a78-pmu
+          - arm,cortex-a510-pmu
+          - arm,cortex-a710-pmu
+          - arm,cortex-x1-pmu
+          - arm,cortex-x2-pmu
           - arm,neoverse-e1-pmu
           - arm,neoverse-n1-pmu
+          - arm,neoverse-n2-pmu
+          - arm,neoverse-v1-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - nvidia,denver-pmu
+          - nvidia,carmel-pmu
           - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
@@ -58,6 +68,8 @@ properties:
 
   interrupt-affinity:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       When using SPIs, specifies a list of phandles to CPU
       nodes corresponding directly to the affinity of
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 8b77cf83a095..3a2c908ff282 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -43,29 +43,24 @@ properties:
 
       - description:
           For implementations complying to PSCI 0.2.
-        const: arm,psci-0.2
-
-      - description:
-          For implementations complying to PSCI 0.2.
           Function IDs are not required and should be ignored by an OS with
           PSCI 0.2 support, but are permitted to be present for compatibility
           with existing software when "arm,psci" is later in the compatible
           list.
+        minItems: 1
         items:
           - const: arm,psci-0.2
           - const: arm,psci
 
       - description:
           For implementations complying to PSCI 1.0.
-        const: arm,psci-1.0
-
-      - description:
-          For implementations complying to PSCI 1.0.
           PSCI 1.0 is backward compatible with PSCI 0.2 with minor
           specification updates, as defined in the PSCI specification[2].
+        minItems: 1
         items:
           - const: arm,psci-1.0
           - const: arm,psci-0.2
+          - const: arm,psci
 
   method:
     description: The method of calling the PSCI firmware.
@@ -101,7 +96,7 @@ properties:
       bindings in [1]) must specify this property.
 
       [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.yaml
+        Documentation/devicetree/bindings/cpu/idle-states.yaml
 
 patternProperties:
   "^power-domain-":
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 370aab274cd1..1b5ac6b02bc5 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/arm/qcom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: QCOM device tree bindings
+title: QCOM
 
 maintainers:
-  - Stephen Boyd <sboyd@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
   Some qcom based bootloaders identify the dtb blob based on a set of
@@ -38,17 +38,26 @@ description: |
         msm8992
         msm8994
         msm8996
+        msm8998
+        qcs404
         sa8155p
+        sa8540p
         sc7180
         sc7280
+        sc8180x
+        sc8280xp
+        sda660
         sdm630
+        sdm632
+        sdm636
         sdm660
         sdm845
         sdx55
         sdx65
+        sm6125
+        sm6350
         sm7225
         sm8150
-        sdx65
         sm8250
         sm8350
         sm8450
@@ -87,6 +96,11 @@ description: |
   A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
   foundry 2.
 
+  There are many devices in the list below that run the standard ChromeOS
+  bootloader setup and use the open source depthcharge bootloader to boot the
+  OS. These devices do not use the scheme described above. For details, see:
+  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+
 properties:
   $nodename:
     const: "/"
@@ -99,6 +113,7 @@ properties:
 
       - items:
           - enum:
+              - asus,sparrow
               - lg,lenok
           - const: qcom,apq8026
 
@@ -149,31 +164,85 @@ properties:
           - const: qcom,msm8974
 
       - items:
-          - enum:
-              - alcatel,idol347
-          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
           - enum:
-              - longcheer,l8150
+              - alcatel,idol347
+              - asus,z00l
+              - huawei,g7
+              - longcheer,l8910
               - samsung,a3u-eur
               - samsung,a5u-eur
+              - samsung,e5
+              - samsung,e7
+              - samsung,grandmax
+              - samsung,j5
+              - samsung,serranove
+              - wingtech,wt88047
           - const: qcom,msm8916
 
       - items:
+          - const: longcheer,l8150
+          - const: qcom,msm8916-v1-qrd/9-v1
+          - const: qcom,msm8916
+
+      - items:
+          - enum:
+              - lg,bullhead
+              - microsoft,talkman
+              - xiaomi,libra
+          - const: qcom,msm8992
+
+      - items:
           - enum:
               - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
+              - huawei,angler
+              - microsoft,cityman
+              - sony,ivy-row
               - sony,karin-row
               - sony,satsuki-row
               - sony,sumire-row
               - sony,suzuran-row
-              - qcom,msm8994
-          - const: qcom,apq8094
+          - const: qcom,msm8994
+
+      - items:
+          - enum:
+              - arrow,apq8096-db820c
+              - inforce,ifc6640
+          - const: qcom,apq8096-sbc
+          - const: qcom,apq8096
+
+      - items:
+          - enum:
+              - qcom,msm8996-mtp
+              - sony,dora-row
+              - sony,kagura-row
+              - sony,keyaki-row
+              - xiaomi,gemini
+              - xiaomi,natrium
+              - xiaomi,scorpio
+          - const: qcom,msm8996
 
       - items:
-          - const: qcom,msm8996-mtp
+          - enum:
+              - asus,novago-tp370ql
+              - fxtec,pro1
+              - hp,envy-x2
+              - lenovo,miix-630
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - qcom,msm8998-mtp
+              - sony,xperia-lilac
+              - sony,xperia-maple
+              - sony,xperia-poplar
+          - const: qcom,msm8998
 
       - items:
           - enum:
@@ -196,20 +265,372 @@ properties:
               - qcom,ipq8074-hk10-c2
           - const: qcom,ipq8074
 
-      - items:
+      - description: Qualcomm Technologies, Inc. SC7180 IDP
+        items:
           - enum:
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
+      - description: HP Chromebook x2 11c (rev1 - 2)
+        items:
+          - const: google,coachz-rev1
+          - const: google,coachz-rev2
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (newest rev)
+        items:
+          - const: google,coachz
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (rev1 - 2)
+        items:
+          - const: google,coachz-rev1-sku0
+          - const: google,coachz-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (newest rev)
+        items:
+          - const: google,coachz-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev2)
+        items:
+          - const: google,homestar-rev2
+          - const: google,homestar-rev23
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev3)
+        items:
+          - const: google,homestar-rev3
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (newest rev)
+        items:
+          - const: google,homestar
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (rev0)
+        items:
+          - const: google,kingoftown-rev0
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (newest rev)
+        items:
+          - const: google,kingoftown
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev0)
+        items:
+          - const: google,lazor-rev0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev1 - 2)
+        items:
+          - const: google,lazor-rev1
+          - const: google,lazor-rev2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev3 - 8)
+        items:
+          - const: google,lazor-rev3
+          - const: google,lazor-rev4
+          - const: google,lazor-rev5
+          - const: google,lazor-rev6
+          - const: google,lazor-rev7
+          - const: google,lazor-rev8
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (newest rev)
+        items:
+          - const: google,lazor
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku2
+          - const: google,lazor-rev2-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku2
+          - const: google,lazor-rev4-sku2
+          - const: google,lazor-rev5-sku2
+          - const: google,lazor-rev6-sku2
+          - const: google,lazor-rev7-sku2
+          - const: google,lazor-rev8-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (newest rev)
+        items:
+          - const: google,lazor-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku0
+          - const: google,lazor-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku0
+          - const: google,lazor-rev4-sku0
+          - const: google,lazor-rev5-sku0
+          - const: google,lazor-rev6-sku0
+          - const: google,lazor-rev7-sku0
+          - const: google,lazor-rev8-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (newest rev)
+        items:
+          - const: google,lazor-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (rev4 - rev8)
+        items:
+          - const: google,lazor-rev4-sku4
+          - const: google,lazor-rev5-sku4
+          - const: google,lazor-rev6-sku4
+          - const: google,lazor-rev7-sku4
+          - const: google,lazor-rev8-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (newest rev)
+        items:
+          - const: google,lazor-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev4)
+        items:
+          - const: google,lazor-rev4-sku5
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8)
+        items:
+          - const: google,lazor-rev5-sku5
+          - const: google,lazor-rev5-sku6
+          - const: google,lazor-rev6-sku6
+          - const: google,lazor-rev7-sku6
+          - const: google,lazor-rev8-sku6
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (newest rev)
+        items:
+          - const: google,lazor-sku6
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (newest rev)
+        items:
+          - const: google,mrbland-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (newest rev)
+        items:
+          - const: google,mrbland-sku1024
+          - const: google,mrbland-sku768
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with Parade (newest rev)
+        items:
+          - const: google,pazquel-sku5
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with TI (newest rev)
+        items:
+          - const: google,pazquel-sku1
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and Parade (newest rev)
+        items:
+          - const: google,pazquel-sku6
+          - const: google,pazquel-sku4
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and TI (newest rev)
+        items:
+          - const: google,pazquel-sku0
+          - const: google,pazquel-sku2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev1)
+        items:
+          - const: google,pompom-rev1
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev2)
+        items:
+          - const: google,pompom-rev2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (newest rev)
+        items:
+          - const: google,pompom
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev1)
+        items:
+          - const: google,pompom-rev1-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev2)
+        items:
+          - const: google,pompom-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (newest rev)
+        items:
+          - const: google,pompom-sku0
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick (newest rev)
+        items:
+          - const: google,quackingstick-sku1537
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick with LTE (newest rev)
+        items:
+          - const: google,quackingstick-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Trogdor (newest rev)
+        items:
+          - const: google,trogdor
+          - const: qcom,sc7180
+
+      - description: Google Trogdor with LTE (newest rev)
+        items:
+          - const: google,trogdor-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev)
+        items:
+          - const: google,wormdingler-sku1024
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1025
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev)
+        items:
+          - const: google,wormdingler-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1
+          - const: qcom,sc7180
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)
+        items:
+          - const: qcom,sc7280-crd
+          - const: google,hoglin-rev3
+          - const: google,hoglin-rev4
+          - const: google,piglin-rev3
+          - const: google,piglin-rev4
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev)
+        items:
+          - const: google,zoglin
+          - const: google,hoglin
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform
+        items:
+          - const: qcom,sc7280-idp
+          - const: google,senor
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform
+        items:
+          - const: qcom,sc7280-idp2
+          - const: google,piglin
+          - const: qcom,sc7280
+
+      - description: Google Evoker (newest rev)
+        items:
+          - const: google,evoker
+          - const: qcom,sc7280
+
+      - description: Google Herobrine (newest rev)
+        items:
+          - const: google,herobrine
+          - const: qcom,sc7280
+
+      - description: Google Villager (rev0)
+        items:
+          - const: google,villager-rev0
+          - const: qcom,sc7280
+
+      - description: Google Villager (newest rev)
+        items:
+          - const: google,villager
+          - const: qcom,sc7280
+
+      - description: Google Villager with LTE (newest rev)
+        items:
+          - const: google,villager-sku512
+          - const: qcom,sc7280
+
       - items:
           - enum:
-              - qcom,sc7280-crd
-              - qcom,sc7280-idp
-              - qcom,sc7280-idp2
-              - google,hoglin
-              - google,piglin
-              - google,senor
-          - const: qcom,sc7280
+              - lenovo,flex-5g
+              - microsoft,surface-prox
+              - qcom,sc8180x-primus
+          - const: qcom,sc8180x
+
+      - items:
+          - enum:
+              - lenovo,thinkpad-x13s
+              - qcom,sc8280xp-crd
+              - qcom,sc8280xp-qrd
+          - const: qcom,sc8280xp
+
+      - items:
+          - enum:
+              - sony,discovery-row
+              - sony,kirin-row
+              - sony,pioneer-row
+              - sony,voyager-row
+          - const: qcom,sdm630
+
+      - items:
+          - enum:
+              - inforce,ifc6560
+          - const: qcom,sda660
+
+      - items:
+          - enum:
+              - fairphone,fp3
+          - const: qcom,sdm632
+
+      - items:
+          - enum:
+              - sony,mermaid-row
+          - const: qcom,sdm636
 
       - items:
           - enum:
@@ -230,45 +651,92 @@ properties:
 
       - items:
           - enum:
-              - qcom,sdx65-mtp
-          - const: qcom,sdx65
-
-      - items:
-          - enum:
               - qcom,ipq6018-cp01
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
 
       - items:
           - enum:
+              - qcom,qcs404-evb-1000
+              - qcom,qcs404-evb-4000
+          - const: qcom,qcs404-evb
+          - const: qcom,qcs404
+
+      - items:
+          - enum:
               - qcom,sa8155p-adp
           - const: qcom,sa8155p
 
       - items:
           - enum:
+              - qcom,sa8295p-adp
+          - const: qcom,sa8540p
+
+      - items:
+          - enum:
+              - lenovo,yoga-c630
+              - lg,judyln
+              - lg,judyp
+              - oneplus,enchilada
+              - oneplus,fajita
+              - qcom,sdm845-mtp
+              - shift,axolotl
+              - samsung,w737
+              - sony,akari-row
+              - sony,akatsuki-row
+              - sony,apollo-row
+              - thundercomm,db845c
+              - xiaomi,beryllium
+              - xiaomi,polaris
+          - const: qcom,sdm845
+
+      - items:
+          - enum:
+              - sony,pdx201
+          - const: qcom,sm6125
+
+      - items:
+          - enum:
+              - sony,pdx213
+          - const: qcom,sm6350
+
+      - items:
+          - enum:
               - fairphone,fp4
           - const: qcom,sm7225
 
       - items:
           - enum:
+              - microsoft,surface-duo
+              - qcom,sm8150-hdk
               - qcom,sm8150-mtp
+              - sony,bahamut-generic
+              - sony,griffin-generic
           - const: qcom,sm8150
 
       - items:
           - enum:
               - qcom,qrb5165-rb5
+              - qcom,sm8250-hdk
               - qcom,sm8250-mtp
+              - sony,pdx203-generic
+              - sony,pdx206-generic
           - const: qcom,sm8250
 
       - items:
           - enum:
+              - microsoft,surface-duo2
               - qcom,sm8350-hdk
               - qcom,sm8350-mtp
+              - sony,pdx214-generic
+              - sony,pdx215-generic
           - const: qcom,sm8350
 
       - items:
           - enum:
+              - qcom,sm8450-hdk
               - qcom,sm8450-qrd
+              - sony,pdx223
           - const: qcom,sm8450
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml
index a5c0444aa2b4..09241ea1d228 100644
--- a/Documentation/devicetree/bindings/arm/rda.yaml
+++ b/Documentation/devicetree/bindings/arm/rda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RDA Micro platforms device tree bindings
+title: RDA Micro platforms
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml
index 9fb0297fe1ce..ddd9a85099e9 100644
--- a/Documentation/devicetree/bindings/arm/realtek.yaml
+++ b/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/realtek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek platforms device tree bindings
+title: Realtek platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 6a9350ee690b..f51464a08aff 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/renesas.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
+title: Renesas SH-Mobile, R-Mobile, and R-Car Platform
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
@@ -264,6 +264,7 @@ properties:
                   - renesas,r8a779m4
                   - renesas,r8a779m5
                   - renesas,r8a779m8
+                  - renesas,r8a779mb
               - enum:
                   - renesas,r8a7795
                   - renesas,r8a77961
@@ -291,6 +292,13 @@ properties:
               - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
           - const: renesas,r8a77980
 
+      - description: R-Car V3H2 (R8A77980A)
+        items:
+          - enum:
+              - renesas,condor-i # Condor-I (RTP0RC77980SEBS012SA01)
+          - const: renesas,r8a77980a
+          - const: renesas,r8a77980
+
       - description: R-Car E3 (R8A77990)
         items:
           - enum:
@@ -327,6 +335,18 @@ properties:
           - const: renesas,spider-cpu
           - const: renesas,r8a779f0
 
+      - description: R-Car V4H (R8A779G0)
+        items:
+          - enum:
+              - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
+          - const: renesas,r8a779g0
+
+      - items:
+          - enum:
+              - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
+          - const: renesas,white-hawk-cpu
+          - const: renesas,r8a779g0
+
       - description: R-Car H3e (R8A779M0)
         items:
           - enum:
@@ -397,6 +417,14 @@ properties:
           - const: renesas,r8a779m8
           - const: renesas,r8a7795
 
+      - description: R-Car H3Ne-1.7G (R8A779MB)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779mb
+          - const: renesas,r8a7795
+
       - description: RZ/N1D (R9A06G032)
         items:
           - enum:
@@ -406,6 +434,8 @@ properties:
       - description: RZ/G2UL (R9A07G043)
         items:
           - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
               - renesas,r9a07g043u11 # RZ/G2UL Type-1
               - renesas,r9a07g043u12 # RZ/G2UL Type-2
           - const: renesas,r9a07g043
@@ -421,6 +451,21 @@ properties:
               - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
           - const: renesas,r9a07g044
 
+      - description: RZ/V2L (R9A07G054)
+        items:
+          - enum:
+              - renesas,smarc-evk # SMARC EVK
+          - enum:
+              - renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L
+              - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
+          - const: renesas,r9a07g054
+
+      - description: RZ/V2M (R9A09G011)
+        items:
+          - enum:
+              - renesas,rzv2mevk2   # RZ/V2M Eval Board v2.0
+          - const: renesas,r9a09g011
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 4aed16176434..c6c69a4e3777 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rockchip.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip platforms device tree bindings
+title: Rockchip platforms
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -30,6 +30,16 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RG353P
+        items:
+          - const: anbernic,rg353p
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG503
+        items:
+          - const: anbernic,rg503
+          - const: rockchip,rk3566
+
       - description: Asus Tinker board
         items:
           - const: asus,rk3288-tinker
@@ -133,6 +143,11 @@ properties:
               - firefly,roc-rk3399-pc-plus
           - const: rockchip,rk3399
 
+      - description: Firefly Station M2
+        items:
+          - const: firefly,rk3566-roc-pc
+          - const: rockchip,rk3566
+
       - description: FriendlyElec NanoPi R2S
         items:
           - const: friendlyarm,nanopi-r2s
@@ -146,6 +161,7 @@ properties:
               - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
               - friendlyarm,nanopi-r4s
+              - friendlyarm,nanopi-r4s-enterprise
           - const: rockchip,rk3399
 
       - description: GeekBuying GeekBox
@@ -358,30 +374,55 @@ properties:
           - const: google,gru
           - const: rockchip,rk3399
 
-      - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10)
+      - description: |
+          Google Scarlet - Innolux display (Acer Chromebook Tab 10 and more)
         items:
+          - const: google,scarlet-rev15-sku2
+          - const: google,scarlet-rev15-sku4
           - const: google,scarlet-rev15-sku6
           - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku2
+          - const: google,scarlet-rev14-sku4
           - const: google,scarlet-rev14-sku6
           - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku2
+          - const: google,scarlet-rev13-sku4
           - const: google,scarlet-rev13-sku6
           - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku2
+          - const: google,scarlet-rev12-sku4
           - const: google,scarlet-rev12-sku6
           - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku2
+          - const: google,scarlet-rev11-sku4
           - const: google,scarlet-rev11-sku6
           - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku2
+          - const: google,scarlet-rev10-sku4
           - const: google,scarlet-rev10-sku6
           - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku2
+          - const: google,scarlet-rev9-sku4
           - const: google,scarlet-rev9-sku6
           - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku2
+          - const: google,scarlet-rev8-sku4
           - const: google,scarlet-rev8-sku6
           - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku2
+          - const: google,scarlet-rev7-sku4
           - const: google,scarlet-rev7-sku6
           - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku2
+          - const: google,scarlet-rev6-sku4
           - const: google,scarlet-rev6-sku6
           - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku2
+          - const: google,scarlet-rev5-sku4
           - const: google,scarlet-rev5-sku6
           - const: google,scarlet-rev5
+          - const: google,scarlet-rev4-sku2
+          - const: google,scarlet-rev4-sku4
           - const: google,scarlet-rev4-sku6
           - const: google,scarlet-rev4
           - const: google,scarlet
@@ -465,6 +506,11 @@ properties:
           - const: netxeon,r89
           - const: rockchip,rk3288
 
+      - description: OPEN AI LAB EAIDK-610
+        items:
+          - const: openailab,eaidk-610
+          - const: rockchip,rk3399
+
       - description: Orange Pi RK3399 board
         items:
           - const: rockchip,rk3399-orangepi
@@ -481,6 +527,19 @@ properties:
           - const: pine64,pinebook-pro
           - const: rockchip,rk3399
 
+      - description: Pine64 PineNote
+        items:
+          - enum:
+              - pine64,pinenote-v1.1
+              - pine64,pinenote-v1.2
+          - const: pine64,pinenote
+          - const: rockchip,rk3566
+
+      - description: Pine64 PinePhonePro
+        items:
+          - const: pine64,pinephone-pro
+          - const: rockchip,rk3399
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -494,9 +553,18 @@ properties:
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
-      - description: Pine64 Quartz64 Model A
+      - description: Pine64 Quartz64 Model A/B
         items:
-          - const: pine64,quartz64-a
+          - enum:
+              - pine64,quartz64-a
+              - pine64,quartz64-b
+          - const: rockchip,rk3566
+
+      - description: Pine64 SoQuartz SoM
+        items:
+          - enum:
+              - pine64,soquartz-cm4io
+          - const: pine64,soquartz
           - const: rockchip,rk3566
 
       - description: Radxa Rock
@@ -515,6 +583,11 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK 4C+
+        items:
+          - const: radxa,rock-4c-plus
+          - const: rockchip,rk3399
+
       - description: Radxa ROCK Pi E
         items:
           - const: radxa,rockpi-e
@@ -532,11 +605,21 @@ properties:
           - const: vamrs,rk3399pro-vmarc-som
           - const: rockchip,rk3399pro
 
+      - description: Radxa ROCK Pi S
+        items:
+          - const: radxa,rockpis
+          - const: rockchip,rk3308
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square
           - const: rockchip,rk3288
 
+      - description: Radxa ROCK3 Model A
+        items:
+          - const: radxa,rock3a
+          - const: rockchip,rk3568
+
       - description: Rikomagic MK808 v1
         items:
           - const: rikomagic,mk808
@@ -651,6 +734,11 @@ properties:
           - const: rockchip,rk3568-evb1-v10
           - const: rockchip,rk3568
 
+      - description: Rockchip RK3568 Banana Pi R2 Pro
+        items:
+          - const: rockchip,rk3568-bpi-r2pro
+          - const: rockchip,rk3568
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
index 5ece38065e54..8c73bc7f4009 100644
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -21,10 +21,12 @@ select:
         enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
 
   required:
     - compatible
@@ -35,10 +37,12 @@ properties:
       - enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
           - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
           - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
       - const: syscon
       - const: simple-mfd
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 052cd94113d4..faea33e4f731 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -140,6 +140,8 @@ properties:
         items:
           - enum:
               - insignal,arndale-octa           # Insignal Arndale Octa
+              - samsung,chagall-wifi            # Samsung SM-T800
+              - samsung,klimt-wifi              # Samsung SM-T700
               - samsung,smdk5420                # Samsung SMDK5420 eval
           - const: samsung,exynos5420
           - const: samsung,exynos5
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
new file mode 100644
index 000000000000..653f85997643
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC compatibles naming convention
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    samsung,SoC-IP
+
+  For example::
+    samsung,exynos5433-cmu-isp
+
+select:
+  properties:
+    compatible:
+      pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Preferred naming style for compatibles of SoC components
+        pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$"
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - samsung,exynos4x12-pinctrl
+          - samsung,exynos4x12-usb2-phy
+          - samsung,s3c64xx-pinctrl
+          - samsung,s3c64xx-wakeup-eint
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
index 7ca5375f278f..6096c082d56d 100644
--- a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
@@ -22,7 +22,6 @@ properties:
     description: |
       should contain 3 regions: control register, revision register,
       operation register, in this order.
-    minItems: 3
     maxItems: 3
 
   interrupts:
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
deleted file mode 100644
index 46652bf65147..000000000000
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SP810 System Controller
------------------------
-
-Required properties:
-
-- compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.yaml
-		for more details
-		should be: "arm,sp810", "arm,primecell"
-
-- reg:		standard registers property, physical address and size
-		of the control registers
-
-- clock-names:	from the common clock bindings, for more details see
-		Documentation/devicetree/bindings/clock/clock-bindings.txt;
-		should be: "refclk", "timclk", "apb_pclk"
-
-- clocks:	from the common clock bindings, phandle and clock
-		specifier pairs for the entries of clock-names property
-
-- #clock-cells: from the common clock bindings;
-		should be: <1>
-
-- clock-output-names: from the common clock bindings;
-		should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
-
-- assigned-clocks: from the common clock binding;
-		should be: clock specifier for each output clock of this
-		provider node
-
-- assigned-clock-parents: from the common clock binding;
-		should be: phandle of input clock listed in clocks
-		property with the highest frequency
-
-Example:
-	v2m_sysctl: sysctl@20000 {
-		compatible = "arm,sp810", "arm,primecell";
-		reg = <0x020000 0x1000>;
-		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-		clock-names = "refclk", "timclk", "apb_pclk";
-		#clock-cells = <1>;
-		clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-		assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-		assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-
-	};
diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml
new file mode 100644
index 000000000000..bc8e524aa90a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express SP810 System Controller bindings
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm SP810 system controller provides clocks, timers and a watchdog.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp810
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp810
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: timclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: timer clock
+      - description: APB register access clock
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 4
+
+  assigned-clocks:
+    maxItems: 4
+
+  assigned-clock-parents:
+    maxItems: 4
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctl@20000 {
+        compatible = "arm,sp810", "arm,primecell";
+        reg = <0x020000 0x1000>;
+        clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+        clock-names = "refclk", "timclk", "apb_pclk";
+        #clock-cells = <1>;
+        clock-output-names = "timerclken0", "timerclken1",
+                             "timerclken2", "timerclken3";
+        assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>,
+                          <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+        assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>,
+                                 <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt
deleted file mode 100644
index 93372f2a7df9..000000000000
--- a/Documentation/devicetree/bindings/arm/spe-pmu.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
-
-ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
-performance sample data using an in-memory trace buffer.
-
-** SPE Required properties:
-
-- compatible : should be one of:
-	       "arm,statistical-profiling-extension-v1"
-
-- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
-               SPE is only supported on a subset of the CPUs, please consult
-	       the arm,gic-v3 binding for details on describing a PPI partition.
-
-** Example:
-
-spe-pmu {
-        compatible = "arm,statistical-profiling-extension-v1";
-        interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml
index 605ad3f882ef..a465c9eca76e 100644
--- a/Documentation/devicetree/bindings/arm/spear.yaml
+++ b/Documentation/devicetree/bindings/arm/spear.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/spear.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST SPEAr Platforms Device Tree Bindings
+title: ST SPEAr Platforms
 
 maintainers:
   - Viresh Kumar <vireshk@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
index a41cd8764885..3ca054c64377 100644
--- a/Documentation/devicetree/bindings/arm/sti.yaml
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST STi Platforms Device Tree Bindings
+title: ST STi Platforms
 
 maintainers:
   - Patrice Chotard <patrice.chotard@foss.st.com>
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index b07720ea9611..4c605bccc474 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -14,20 +14,11 @@ properties:
     const: "/"
   compatible:
     oneOf:
-      - description: DH STM32MP1 SoM based Boards
+      - description: emtrion STM32MP1 Argon based Boards
         items:
-          - enum:
-              - arrow,stm32mp157a-avenger96 # Avenger96
-              - dh,stm32mp153c-dhcom-drc02
-              - dh,stm32mp157c-dhcom-pdk2
-              - dh,stm32mp157c-dhcom-picoitx
-          - enum:
-              - dh,stm32mp153c-dhcom-som
-              - dh,stm32mp157a-dhcor-som
-              - dh,stm32mp157c-dhcom-som
-          - enum:
-              - st,stm32mp153
-              - st,stm32mp157
+          - const: emtrion,stm32mp157c-emsbc-argon
+          - const: emtrion,stm32mp157c-emstamp-argon
+          - const: st,stm32mp157
       - items:
           - enum:
               - st,stm32f429i-disco
@@ -59,6 +50,27 @@ properties:
           - enum:
               - st,stm32mp135f-dk
           - const: st,stm32mp135
+
+      - description: ST STM32MP151 based Boards
+        items:
+          - enum:
+              - prt,prtt1a   # Protonic PRTT1A
+              - prt,prtt1c   # Protonic PRTT1C
+              - prt,prtt1s   # Protonic PRTT1S
+          - const: st,stm32mp151
+
+      - description: DH STM32MP153 DHCOM SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcom-drc02
+          - const: dh,stm32mp153c-dhcom-som
+          - const: st,stm32mp153
+
+      - description: DH STM32MP153 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcor-drc-compact
+          - const: dh,stm32mp153c-dhcor-som
+          - const: st,stm32mp153
+
       - items:
           - enum:
               - shiratech,stm32mp157a-iot-box # IoT Box
@@ -66,12 +78,44 @@ properties:
               - st,stm32mp157c-ed1
               - st,stm32mp157a-dk1
               - st,stm32mp157c-dk2
+          - const: st,stm32mp157
 
+      - items:
+          - const: st,stm32mp157a-dk1-scmi
+          - const: st,stm32mp157a-dk1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-dk2-scmi
+          - const: st,stm32mp157c-dk2
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ed1-scmi
+          - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
       - items:
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1-scmi
+          - const: st,stm32mp157c-ev1
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - arrow,stm32mp157a-avenger96 # Avenger96
+          - const: dh,stm32mp157a-dhcor-som
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - dh,stm32mp157c-dhcom-pdk2
+              - dh,stm32mp157c-dhcom-picoitx
+          - const: dh,stm32mp157c-dhcom-som
+          - const: st,stm32mp157
 
       - description: Engicam i.Core STM32MP1 SoM based Boards
         items:
@@ -97,6 +141,7 @@ properties:
           - const: oct,stm32mp15xx-osd32
           - enum:
               - st,stm32mp157
+
       - description: Odyssey STM32MP1 SoM based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
new file mode 100644
index 000000000000..def7d0cfeb31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+  - qinjian <qinjian@cqplus1.com>
+
+description: |
+  ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+  Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sunplus,sp7021-achip
+          - sunplus,sp7021-demo-v3
+      - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index c8a3102c0fde..3ad1cd50e3fe 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner platforms device tree bindings
+title: Allwinner platforms
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -391,6 +391,11 @@ properties:
           - const: libretech,all-h5-cc-h5
           - const: allwinner,sun50i-h5
 
+      - description: Lichee Pi Nano
+        items:
+          - const: licheepi,licheepi-nano
+          - const: allwinner,suniv-f1c100s
+
       - description: Lichee Pi One
         items:
           - const: licheepi,licheepi-one
@@ -444,6 +449,11 @@ properties:
           - const: haoyu,a10-marsboard
           - const: allwinner,sun4i-a10
 
+      - description: HAOYU Electronics Marsboard A20
+        items:
+          - const: haoyu,a20-marsboard
+          - const: allwinner,sun7i-a20
+
       - description: MapleBoard MP130
         items:
           - const: mapleboard,mp130
@@ -853,6 +863,11 @@ properties:
           - const: yones-toptech,bs1078-v2
           - const: allwinner,sun6i-a31s
 
+      - description: X96 Mate TV box
+        items:
+          - const: hechuang,x96-mate
+          - const: allwinner,sun50i-h616
+
       - description: Xunlong OrangePi
         items:
           - const: xunlong,orangepi
@@ -953,4 +968,9 @@ properties:
           - const: xunlong,orangepi-zero-plus2-h3
           - const: allwinner,sun8i-h3
 
+      - description: Xunlong OrangePi Zero 2
+        items:
+          - const: xunlong,orangepi-zero2
+          - const: allwinner,sun50i-h616
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index 8eee312c2e6f..99566688d033 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -29,10 +29,20 @@ properties:
   compatible:
     enum:
       - allwinner,sun5i-a13-mbus
+      - allwinner,sun8i-a33-mbus
+      - allwinner,sun8i-a50-mbus
+      - allwinner,sun8i-a83t-mbus
       - allwinner,sun8i-h3-mbus
       - allwinner,sun8i-r40-mbus
+      - allwinner,sun8i-v3s-mbus
+      - allwinner,sun8i-v536-mbus
+      - allwinner,sun20i-d1-mbus
       - allwinner,sun50i-a64-mbus
+      - allwinner,sun50i-a100-mbus
       - allwinner,sun50i-h5-mbus
+      - allwinner,sun50i-h6-mbus
+      - allwinner,sun50i-h616-mbus
+      - allwinner,sun50i-r329-mbus
 
   reg:
     minItems: 1
@@ -81,13 +91,13 @@ required:
   - dma-ranges
 
 if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - allwinner,sun8i-h3-mbus
-          - allwinner,sun50i-a64-mbus
-          - allwinner,sun50i-h5-mbus
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun5i-a13-mbus
+            - allwinner,sun8i-r40-mbus
 
 then:
   properties:
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
index d8b48f2edf1b..851f48ead927 100644
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -18,10 +18,6 @@ stable binding/ABI.
 
 ---------------------------------------------------------------
 
-Boards with the Synaptics AS370 SoC shall have the following properties:
-  Required root node property:
-    compatible: "syna,as370"
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index 49841ca272ee..1f62253f9410 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/tegra.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVIDIA Tegra device tree bindings
+title: NVIDIA Tegra
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
new file mode 100644
index 000000000000..711bb4d08c60
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra CPU COMPLEX CLUSTER area device tree bindings
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
+  registers that initiate CPU frequency/voltage transitions.
+
+properties:
+  $nodename:
+    pattern: "ccplex@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-ccplex-cluster
+      - nvidia,tegra234-ccplex-cluster
+
+  reg:
+    maxItems: 1
+
+  nvidia,bpmp:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Specifies the BPMP node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nvidia,bpmp
+
+examples:
+  - |
+    ccplex@e000000 {
+      compatible = "nvidia,tegra234-ccplex-cluster";
+      reg = <0x0e000000 0x5ffff>;
+      nvidia,bpmp = <&bpmp>;
+      status = "okay";
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
new file mode 100644
index 000000000000..788a13f8aa93
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 AXI2APB bridge
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^axi2apb@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-axi2apb
+
+  reg:
+    maxItems: 6
+    description: Physical base address and length of registers for all bridges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    axi2apb: axi2apb@2390000 {
+      compatible = "nvidia,tegra194-axi2apb";
+      reg = <0x02390000 0x1000>,
+            <0x023a0000 0x1000>,
+            <0x023b0000 0x1000>,
+            <0x023c0000 0x1000>,
+            <0x023d0000 0x1000>,
+            <0x023e0000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
new file mode 100644
index 000000000000..debb2b0c8013
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 CBB 1.0 bindings
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 1.0 has
+  multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+  initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+  This driver handles errors due to illegal register accesses reported
+  by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+  "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+  which is the main NOC.
+
+  By default, the access issuing initiator is informed about the error
+  using SError or Data Abort exception unless the ERD (Error Response
+  Disable) is enabled/set for that initiator. If the ERD is enabled, then
+  SError or Data Abort is masked and the error is reported with interrupt.
+
+  - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+    errors due to illegal accesses from CCPLEX are reported by interrupts.
+    If ERD is not set, then error is reported by SError.
+  - For other initiators, the ERD is disabled. So, the access issuing
+    initiator is informed about the illegal access by Data Abort exception.
+    In addition, an interrupt is also generated to CCPLEX. These initiators
+    include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+    engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+    engine) etc which can initiate transactions.
+
+  The driver prints relevant debug information like Error Code, Error
+  Description, Master, Address, AXI ID, Cache, Protection, Security Group
+  etc on receiving error notification.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-cbb-noc
+      - nvidia,tegra194-aon-noc
+      - nvidia,tegra194-bpmp-noc
+      - nvidia,tegra194-rce-noc
+      - nvidia,tegra194-sce-noc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      CCPLEX receives secure or nonsecure interrupt depending on error type.
+      A secure interrupt is received for SEC(firewall) & SLV errors and a
+      non-secure interrupt is received for TMO & DEC errors.
+    items:
+      - description: non-secure interrupt
+      - description: secure interrupt
+
+  nvidia,axi2apb:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      Specifies the node having all axi2apb bridges which need to be checked
+      for any error logged in their status register.
+
+  nvidia,apbmisc:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description:
+      Specifies the apbmisc node which need to be used for reading the ERD
+      register.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,apbmisc
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-noc@2300000 {
+        compatible = "nvidia,tegra194-cbb-noc";
+        reg = <0x02300000 0x1000>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+        nvidia,axi2apb = <&axi2apb>;
+        nvidia,apbmisc = <&apbmisc>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
index 0afec83cc723..7fd8d47b1be4 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -14,7 +14,6 @@ properties:
   compatible:
     enum:
       - nvidia,tegra20-pmc
-      - nvidia,tegra20-pmc
       - nvidia,tegra30-pmc
       - nvidia,tegra114-pmc
       - nvidia,tegra124-pmc
@@ -209,7 +208,7 @@ properties:
       "^[a-z0-9]+$":
         type: object
 
-        patternProperties:
+        properties:
           clocks:
             minItems: 1
             maxItems: 8
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
new file mode 100644
index 000000000000..7b1fe50ffbe0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra CBB 2.0 bindings
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 2.0 consists
+  of multiple sub-blocks connected to each other to create a topology.
+  The Tegra234 SoC has different fabrics based on CBB 2.0 architecture
+  which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and
+  "CBB central fabric".
+
+  In CBB 2.0, each initiator which can issue transactions connects to a
+  Root Master Node (MN) before it connects to any other element of the
+  fabric. Each Root MN contains a Error Monitor (EM) which detects and
+  logs error. Interrupts from various EM blocks are collated by Error
+  Notifier (EN) which is per fabric and presents a single interrupt from
+  fabric to the SoC interrupt controller.
+
+  The driver handles errors from CBB due to illegal register accesses
+  and prints debug information about failed transaction on receiving
+  the interrupt from EN. Debug information includes Error Code, Error
+  Description, MasterID, Fabric, SlaveID, Address, Cache, Protection,
+  Security Group etc on receiving error notification.
+
+  If the Error Response Disable (ERD) is set/enabled for an initiator,
+  then SError or Data abort exception error response is masked and an
+  interrupt is used for reporting errors due to illegal accesses from
+  that initiator. The value returned on read failures is '0xFFFFFFFF'
+  for compatibility with PCIE.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-fabric@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-aon-fabric
+      - nvidia,tegra234-bpmp-fabric
+      - nvidia,tegra234-cbb-fabric
+      - nvidia,tegra234-dce-fabric
+      - nvidia,tegra234-rce-fabric
+      - nvidia,tegra234-sce-fabric
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: secure interrupt from error notifier
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-fabric@1300000 {
+      compatible = "nvidia,tegra234-cbb-fabric";
+      reg = <0x13a00000 0x400000>;
+      interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tesla.yaml b/Documentation/devicetree/bindings/arm/tesla.yaml
new file mode 100644
index 000000000000..d670a0d56222
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tesla.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tesla.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla Full Self Driving(FSD) platforms
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: FSD SoC board
+        items:
+          - enum:
+              - tesla,fsd-evb   # Tesla FSD Evaluation
+          - const: tesla,fsd
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index b03c10fa2e7a..28b8232e1c5b 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -19,25 +19,35 @@ properties:
   compatible:
     oneOf:
 
+      - description: K3 AM62A7 SoC
+        items:
+          - enum:
+              - ti,am62a7-sk
+          - const: ti,am62a7
+
+      - description: K3 AM625 SoC
+        items:
+          - enum:
+              - ti,am625-sk
+          - const: ti,am625
+
+      - description: K3 AM642 SoC
+        items:
+          - enum:
+              - ti,am642-evm
+              - ti,am642-sk
+          - const: ti,am642
+
       - description: K3 AM654 SoC
         items:
           - enum:
-              - ti,am654-evm
-              - siemens,iot2050-basic
-              - siemens,iot2050-basic-pg2
               - siemens,iot2050-advanced
               - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
+              - ti,am654-evm
           - const: ti,am654
 
-      - description: K3 J721E SoC
-        oneOf:
-          - const: ti,j721e
-          - items:
-              - enum:
-                  - ti,j721e-evm
-                  - ti,j721e-sk
-              - const: ti,j721e
-
       - description: K3 J7200 SoC
         oneOf:
           - const: ti,j7200
@@ -46,12 +56,14 @@ properties:
                   - ti,j7200-evm
               - const: ti,j7200
 
-      - description: K3 AM642 SoC
-        items:
-          - enum:
-              - ti,am642-evm
-              - ti,am642-sk
-          - const: ti,am642
+      - description: K3 J721E SoC
+        oneOf:
+          - const: ti,j721e
+          - items:
+              - enum:
+                  - ti,j721e-evm
+                  - ti,j721e-sk
+              - const: ti,j721e
 
       - description: K3 J721s2 SoC
         items:
diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml
index 9c1cacbdc916..716ba4a3cab4 100644
--- a/Documentation/devicetree/bindings/arm/toshiba.yaml
+++ b/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/toshiba.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba Visconti Platform Device Tree Bindings
+title: Toshiba Visconti Platform
 
 maintainers:
   - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
index 5db7cfba81a4..b42d20fa4359 100644
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ux500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ux500 platforms device tree bindings
+title: Ux500 platforms
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -20,6 +20,11 @@ properties:
           - const: st-ericsson,mop500
           - const: st-ericsson,u8500
 
+      - description: ST-Ericsson HREF520
+        items:
+          - const: st-ericsson,href520
+          - const: st-ericsson,u8500
+
       - description: ST-Ericsson HREF (v60+)
         items:
           - const: st-ericsson,hrefv60+
@@ -30,9 +35,39 @@ properties:
           - const: calaosystems,snowball-a9500
           - const: st-ericsson,u9500
 
+      - description: Samsung Galaxy Ace 2 (GT-I8160)
+        items:
+          - const: samsung,codina
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Exhibit (SGH-T599)
+        items:
+          - const: samsung,codina-tmo
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Beam (GT-I8530)
+        items:
+          - const: samsung,gavini
+          - const: st-ericsson,u8500
+
       - description: Samsung Galaxy S III mini (GT-I8190)
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
 
+      - description: Samsung Galaxy S Advance (GT-I9070)
+        items:
+          - const: samsung,janice
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Amp (SGH-I407)
+        items:
+          - const: samsung,kyle
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy XCover 2 (GT-S7710)
+        items:
+          - const: samsung,skomer
+          - const: st-ericsson,u8500
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt b/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
deleted file mode 100644
index a4f15262d717..000000000000
--- a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-ARM Versatile system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,versatile-sysreg", "syscon"
-- reg : physical base address and the size of the registers window
diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
new file mode 100644
index 000000000000..09e1adf5ca7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express configuration bus bindings
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control register block, acting as a bridge to the
+  platform's configuration bus via "system control" interface, addressing
+  devices with site number, position in the board stack, config controller,
+  function and device numbers - see motherboard's TRM for more details.
+
+properties:
+  compatible:
+    const: arm,vexpress,config-bus
+
+  arm,vexpress,config-bridge:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the sysreg node.
+
+  muxfpga:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-muxfpga
+
+      arm,vexpress-sysreg,func:
+        description: FPGA specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 7
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  shutdown:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-shutdown
+
+      arm,vexpress-sysreg,func:
+        description: shutdown identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 8
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  reboot:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reboot
+
+      arm,vexpress-sysreg,func:
+        description: reboot identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 9
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  dvimode:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-dvimode
+
+      arm,vexpress-sysreg,func:
+        description: DVI mode identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 11
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+additionalProperties: false
+
+required:
+  - compatible
+  - arm,vexpress,config-bridge
+
+patternProperties:
+  'clk[0-9]*$':
+    type: object
+    description:
+      clocks
+
+    properties:
+      compatible:
+        const: arm,vexpress-osc
+
+      arm,vexpress-sysreg,func:
+        description: clock specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 1
+          - description: clock number
+
+      freq-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimal clock frequency
+          - description: maximum clock frequency
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+      - "#clock-cells"
+
+  "^volt-.+$":
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        const: arm,vexpress-volt
+
+      arm,vexpress-sysreg,func:
+        description: regulator specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 2
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    unevaluatedProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^amp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-amp
+
+      arm,vexpress-sysreg,func:
+        description: current sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 3
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^temp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-temp
+
+      arm,vexpress-sysreg,func:
+        description: temperature sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 4
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^reset[0-9]*$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reset
+
+      arm,vexpress-sysreg,func:
+        description: reset specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 5
+          - description: reset device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^power-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-power
+
+      arm,vexpress-sysreg,func:
+        description: power sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 12
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^energy(-.+)?$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-energy
+
+      arm,vexpress-sysreg,func:
+        description: energy sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 13
+              - description: device number
+          - items:
+              - const: 13
+              - description: device number
+              - const: 13
+              - description: second device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+examples:
+  - |
+    mcc {
+        compatible = "arm,vexpress,config-bus";
+        arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+        clk0 {
+            compatible = "arm,vexpress-osc";
+            arm,vexpress-sysreg,func = <1 0>;
+            #clock-cells = <0>;
+        };
+
+        energy {
+            compatible = "arm,vexpress-energy";
+            arm,vexpress-sysreg,func = <13 0>, <13 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
deleted file mode 100644
index 50095802fb4a..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-ARM Versatile Express system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,vexpress,sysreg";
-- reg : physical base address and the size of the registers window
-
-Deprecated properties, replaced by GPIO subnodes (see below):
-- gpio-controller : specifies that the node is a GPIO controller
-- #gpio-cells : size of the GPIO specifier, should be 2:
-  - first cell is the pseudo-GPIO line number:
-    0 - MMC CARDIN
-    1 - MMC WPROT
-    2 - NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Control registers providing pseudo-GPIO lines must be represented
-by subnodes, each of them requiring the following properties:
-- compatible value : one of
-			"arm,vexpress-sysreg,sys_led"
-			"arm,vexpress-sysreg,sys_mci"
-			"arm,vexpress-sysreg,sys_flash"
-- gpio-controller : makes the node a GPIO controller
-- #gpio-cells : size of the GPIO specifier, must be 2:
-  - first cell is the function number:
-    - for sys_led : 0..7 = LED 0..7
-    - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
-    - for sys_flash : 0 = NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Example:
-	v2m_sysreg: sysreg@10000000 {
- 		compatible = "arm,vexpress-sysreg";
- 		reg = <0x10000000 0x1000>;
-
-		v2m_led_gpios: sys_led@8 {
-			compatible = "arm,vexpress-sysreg,sys_led";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_mmc_gpios: sys_mci@48 {
-			compatible = "arm,vexpress-sysreg,sys_mci";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_flash_gpios: sys_flash@4c {
-			compatible = "arm,vexpress-sysreg,sys_flash";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
- 	};
-
-This block also can also act a bridge to the platform's configuration
-bus via "system control" interface, addressing devices with site number,
-position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details. All configuration
-controller accessible via this interface must reference the sysreg
-node via "arm,vexpress,config-bridge" phandle and define appropriate
-topology properties - see main vexpress node documentation for more
-details. Each child of such node describes one function and must
-define the following properties:
-- compatible value : must be one of (corresponding to the TRM):
-	"arm,vexpress-amp"
-	"arm,vexpress-dvimode"
-	"arm,vexpress-energy"
-	"arm,vexpress-muxfpga"
-	"arm,vexpress-osc"
-	"arm,vexpress-power"
-	"arm,vexpress-reboot"
-	"arm,vexpress-reset"
-	"arm,vexpress-scc"
-	"arm,vexpress-shutdown"
-	"arm,vexpress-temp"
-	"arm,vexpress-volt"
-- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
-  - first cell of each group defines the function number
-    (eg. 1 for clock generator, 2 for voltage regulators etc.)
-  - second cell of each group defines device number (eg. osc 0,
-    osc 1 etc.)
-  - some functions (eg. energy meter, with its 64 bit long counter)
-    are using more than one function/device number pair
-
-Example:
-	mcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-		};
-
-		energy@0 {
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
new file mode 100644
index 000000000000..f04db802a732
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express system registers bindings
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    const: arm,vexpress-sysreg
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  gpio-controller:
+    deprecated: true
+
+  "#gpio-cells":
+    deprecated: true
+    const: 2
+
+additionalProperties: false
+
+patternProperties:
+  '^gpio@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      GPIO children
+
+    properties:
+      compatible:
+        enum:
+          - arm,vexpress-sysreg,sys_led
+          - arm,vexpress-sysreg,sys_mci
+          - arm,vexpress-sysreg,sys_flash
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description: |
+          The first cell is the function number:
+          for sys_led : 0..7 = LED 0..7
+          for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+          for sys_flash : 0 = NOR FLASH WPn
+          The second cell can take standard GPIO flags.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,vexpress-sysreg";
+        reg = <0x00000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x1000>;
+
+        v2m_led_gpios: gpio@8 {
+            compatible = "arm,vexpress-sysreg,sys_led";
+            reg = <0x008 4>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml
index 7b762bfc11e7..5d5ad5a60451 100644
--- a/Documentation/devicetree/bindings/arm/vt8500.yaml
+++ b/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/vt8500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+title: VIA/Wondermedia VT8500 Platforms
 
 maintainers:
   - Tony Prisk <linux@prisktech.co.nz>
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index db5c56db30ec..61d77acbeb5e 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -7,15 +7,17 @@ the following properties:
 	compatible = "xen,xen-<version>", "xen,xen";
   where <version> is the version of the Xen ABI of the platform.
 
-- reg: specifies the base physical address and size of a region in
-  memory where the grant table should be mapped to, using an
-  HYPERVISOR_memory_op hypercall. The memory region is large enough to map
-  the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
-  This property is unnecessary when booting Dom0 using ACPI.
+- reg: specifies the base physical address and size of the regions in memory
+  where the special resources should be mapped to, using an HYPERVISOR_memory_op
+  hypercall.
+  Region 0 is reserved for mapping grant table, it must be always present.
+  The memory region is large enough to map the whole grant table (it is larger
+  or equal to gnttab_max_grant_frames()).
+  Regions 1...N are extended regions (unused address space) for mapping foreign
+  GFNs and grants, they might be absent if there is nothing to expose.
 
 - interrupts: the interrupt used by Xen to inject event notifications.
   A GIC node is also required.
-  This property is unnecessary when booting Dom0 using ACPI.
 
 To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
 under /hypervisor with following parameters:
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
index 4dc0e0195974..969cfe6dc434 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/xilinx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq Platforms Device Tree Bindings
+title: Xilinx Zynq Platforms
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-  - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
-  - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
-			CINMP : COMINIT Negate Minimum Period.
-			CIBGN : COMINIT Burst Gap Nominal.
-			CIBGMX: COMINIT Burst Gap Maximum.
-			CIBGMN: COMINIT Burst Gap Minimum.
-  - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
-  - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
-			CWBGMN: COMWAKE Burst Gap Minimum.
-			CWBGMX: COMWAKE Burst Gap Maximum.
-			CWBGN: COMWAKE Burst Gap Nominal.
-			CWNMP: COMWAKE Negate Minimum Period.
-  - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
-  - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
-			BMX: COM Burst Maximum.
-			BNM: COM Burst Nominal.
-			SFD: Signal Failure Detection value.
-			PTST: Partial to Slumber timer value.
-  - ceva,p0-retry-params: Retry interval timing value for port 0.
-  - ceva,p1-retry-params: Retry interval timing value for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
-			RIT:  Retry Interval Timer.
-			RCT:  Rate Change Timer.
-
-Optional properties:
-  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
-  - phys: phandle for the PHY device
-  - resets: phandle to the reset controller for the SATA IP
-
-Examples:
-	ahci@fd0c0000 {
-		compatible = "ceva,ahci-1v84";
-		reg = <0xfd0c0000 0x200>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 133 4>;
-		clocks = <&clkc SATA_CLK_ID>;
-		ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
-		ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-		ceva,broken-gen2;
-		phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
-		resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
new file mode 100644
index 000000000000..94d72aeaad0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Damien Le Moal <damien.lemoal@opensource.wdc.com>
+
+description:
+  This document defines device tree properties for a common AHCI SATA
+  controller implementation. It's hardware interface is supposed to
+  conform to the technical standard defined by Intel (see Serial ATA
+  Advanced Host Controller Interface specification for details). The
+  document doesn't constitute a DT-node binding by itself but merely
+  defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  reg:
+    description:
+      Generic AHCI registers space conforming to the Serial ATA AHCI
+      specification.
+
+  reg-names:
+    description: CSR space IDs
+    contains:
+      const: ahci
+
+  interrupts:
+    description:
+      Generic AHCI state change interrupt. Can be implemented either as a
+      single line attached to the controller or as a set of the signals
+      indicating the particular port events.
+    minItems: 1
+    maxItems: 32
+
+  ahci-supply:
+    description: Power regulator for AHCI controller
+
+  target-supply:
+    description: Power regulator for SATA target device
+
+  phy-supply:
+    description: Power regulator for SATA PHY
+
+  phys:
+    description: Reference to the SATA PHY node
+    maxItems: 1
+
+  phy-names:
+    const: sata-phy
+
+  hba-cap:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      Bitfield of the HBA generic platform capabilities like Staggered
+      Spin-up or Mechanical Presence Switch support. It can be used to
+      appropriately initialize the HWinit fields of the HBA CAP register
+      in case if the system firmware hasn't done it.
+
+  ports-implemented:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description:
+      Mask that indicates which ports the HBA supports. Useful if PI is not
+      programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: '#/$defs/ahci-port'
+    description:
+      It is optionally possible to describe the ports as sub-nodes so
+      to enable each port independently when dealing with multiple PHYs.
+
+required:
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+$defs:
+  ahci-port:
+    $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+    properties:
+      reg:
+        description:
+          AHCI SATA port identifier. By design AHCI controller can't have
+          more than 32 ports due to the CAP.NP fields and PI register size
+          constraints.
+        minimum: 0
+        maximum: 31
+
+      phys:
+        description: Individual AHCI SATA port PHY
+        maxItems: 1
+
+      phy-names:
+        description: AHCI SATA port PHY ID
+        const: sata-phy
+
+      target-supply:
+        description: Power regulator for SATA port target device
+
+      hba-port-cap:
+        $ref: '/schemas/types.yaml#/definitions/uint32'
+        description:
+          Bitfield of the HBA port-specific platform capabilities like Hot
+          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+          for details). It can be used to initialize the HWinit fields of
+          the PxCMD register in case if the system firmware hasn't done it.
+
+    required:
+      - reg
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
deleted file mode 100644
index 77091a277642..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-It is possible, but not required, to represent each port as a sub-node.
-It allows to enable each port independently when dealing with multiple
-PHYs.
-
-Required properties:
-- compatible        : compatible string, one of:
-  - "brcm,iproc-ahci"
-  - "hisilicon,hisi-ahci"
-  - "cavium,octeon-7130-ahci"
-  - "ibm,476gtr-ahci"
-  - "marvell,armada-380-ahci"
-  - "marvell,armada-3700-ahci"
-  - "snps,dwc-ahci"
-  - "snps,spear-ahci"
-  - "generic-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Please note that when using "generic-ahci" you must also specify a SoC specific
-compatible:
-	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
-- target-supply     : regulator for SATA target power
-- phy-supply        : regulator for PHY power
-- phys              : reference to the SATA PHY node
-- phy-names         : must be "sata-phy"
-- ahci-supply       : regulator for AHCI controller
-- ports-implemented : Mask that indicates which ports that the HBA supports
-		      are available for software to use. Useful if PORTS_IMPL
-		      is not programmed by the BIOS, which is true with
-		      some embedded SOC's.
-
-Required properties when using sub-nodes:
-- #address-cells    : number of cells to encode an address
-- #size-cells       : number of cells representing the size of an address
-
-Sub-nodes required properties:
-- reg		    : the port number
-And at least one of the following properties:
-- phys		    : reference to the SATA PHY node
-- target-supply     : regulator for SATA target power
-
-Examples:
-        sata@ffe08000 {
-		compatible = "snps,spear-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-        };
-
-With sub-nodes:
-	sata@f7e90000 {
-		compatible = "marvell,berlin2q-achi", "generic-ahci";
-		reg = <0xe90000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&chip CLKID_SATA>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-			target-supply = <&reg_sata0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-			target-supply = <&reg_sata1>;;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
new file mode 100644
index 000000000000..7dc2a2e8f598
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AHCI SATA Controller
+
+description: |
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+  It is possible, but not required, to represent each port as a sub-node.
+  It allows to enable each port independently when dealing with multiple
+  PHYs.
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Jens Axboe <axboe@kernel.dk>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-ahci
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+          - marvell,armada-8k-ahci
+          - marvell,berlin2q-ahci
+  required:
+    - compatible
+
+allOf:
+  - $ref: "ahci-common.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,iproc-ahci
+              - marvell,armada-8k-ahci
+              - marvell,berlin2-ahci
+              - marvell,berlin2q-ahci
+          - const: generic-ahci
+      - enum:
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    anyOf:
+      - required: [ phys ]
+      - required: [ target-supply ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "snps,spear-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/berlin2q.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@f7e90000 {
+        compatible = "marvell,berlin2q-ahci", "generic-ahci";
+        reg = <0xf7e90000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&chip CLKID_SATA>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hba-cap = <HBA_SMPS>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+
+            phys = <&sata_phy 0>;
+            target-supply = <&reg_sata0>;
+
+            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+
+            phys = <&sata_phy 1>;
+            target-supply = <&reg_sata1>;
+
+            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
new file mode 100644
index 000000000000..9b7ca4759bd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 SoC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
+  DWC AHCI SATA v4.10a IP-core.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-ahci
+
+  clocks:
+    items:
+      - description: Peripheral APB bus clock
+      - description: Application AXI BIU clock
+      - description: SATA Ports reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+      - const: ref
+
+  resets:
+    items:
+      - description: Application AXI BIU domain reset
+      - description: SATA Ports clock domain reset
+
+  reset-names:
+    items:
+      - const: arst
+      - const: ref
+
+  ports-implemented:
+    maximum: 0x3
+
+patternProperties:
+  "^sata-port@[0-1]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Tx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Rx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1f050000 {
+      compatible = "baikal,bt1-ahci";
+      reg = <0x1f050000 0x2000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <0 64 4>;
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
+      clock-names = "pclk", "aclk", "ref";
+
+      resets = <&ccu_axi 2>, <&ccu_sys 0>;
+      reset-names = "arst", "ref";
+
+      ports-implemented = <0x3>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+
+      sata-port@1 {
+        reg = <1>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
deleted file mode 100644
index b9ae4ce4a0a0..000000000000
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Broadcom SATA3 AHCI Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-			"brcm,bcm7216-ahci"
-			"brcm,bcm7425-ahci"
-			"brcm,bcm7445-ahci"
-			"brcm,bcm-nsp-ahci"
-			"brcm,sata3-ahci"
-			"brcm,bcm63138-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Optional properties:
-
-- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
-  pointing to the RESCAL reset controller provider node.
-- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
-
-Also see ahci-platform.txt.
-
-Example:
-
-	sata@f045a000 {
-		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-		reg-names = "ahci", "top-ctrl";
-		interrupts = <0 30 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 000000000000..fe7f091e744f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+              - brcm,bcm7445-ahci
+              - brcm,bcm7425-ahci
+              - brcm,bcm63138-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+          - brcm,bcm63138-ahci
+then:
+  properties:
+    resets:
+      maxItems: 1
+    reset-names:
+      enum:
+        - rescal
+        - ahci
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 000000000000..9b31f864e071
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk SATA_REF>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
deleted file mode 100644
index 1c3d3cc70051..000000000000
--- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
-  "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
-  the ATA controller and SATA bridges. Values 0..3:
-  Mode 0: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata0 slave interface brought out on IDE pads
-  Mode 1: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata1 slave interface brought out on IDE pads
-  Mode 2: ata1 master <-> sata1
-          ata1 slave  <-> sata0
-          ata0 master and slave interfaces brought out
-               on IDE pads
-  Mode 3: ata0 master <-> sata0
-          ata0 slave  <-> sata1
-          ata1 master and slave interfaces brought out
-               on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
-  The muxmode setting decides whether ATA0 or ATA1 is brought out,
-  and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
-  inside the Gemnini SoC. The Muxmode decides what PATA blocks will
-  be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
-	compatible = "cortina,gemini-sata-bridge";
-	reg = <0x46000000 0x100>;
-	resets = <&rcon 26>, <&rcon 27>;
-	reset-names = "sata0", "sata1";
-	clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
-		 <&gcc GEMINI_CLK_GATE_SATA1>;
-	clock-names = "SATA0_PCLK", "SATA1_PCLK";
-	syscon = <&syscon>;
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-ide-pins;
-	cortina,gemini-enable-sata-bridge;
-};
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
new file mode 100644
index 000000000000..529093666508
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+    takes two Faraday Technology FTIDE010 PATA controllers and bridges
+    them in different configurations to two SATA ports.
+
+properties:
+  compatible:
+    const: cortina,gemini-sata-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+    description: phandles to the reset lines for both SATA bridges
+
+  reset-names:
+    items:
+      - const: sata0
+      - const: sata1
+
+  clocks:
+    maxItems: 2
+    description: phandles to the compulsory peripheral clocks
+
+  clock-names:
+    items:
+      - const: SATA0_PCLK
+      - const: SATA1_PCLK
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller
+
+  cortina,gemini-ata-muxmode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+      - 2
+      - 3
+    description: |
+      Tell the desired multiplexing mode for the ATA controller and SATA
+      bridges.
+      Mode 0: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata0 slave interface brought out on IDE pads
+      Mode 1: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata1 slave interface brought out on IDE pads
+      Mode 2: ata1 master <-> sata1
+              ata1 slave  <-> sata0
+              ata0 master and slave interfaces brought out on IDE pads
+      Mode 3: ata0 master <-> sata0
+              ata0 slave  <-> sata1
+              ata1 master and slave interfaces brought out on IDE pads
+
+  cortina,gemini-enable-ide-pins:
+    type: boolean
+    description: Enables the PATA to IDE connection.
+      The muxmode setting decides whether ATA0 or ATA1 is brought out,
+      and whether master, slave or both interfaces get brought out.
+
+  cortina,gemini-enable-sata-bridge:
+    type: boolean
+    description: Enables the PATA to SATA bridge inside the Gemnini SoC.
+      The Muxmode decides what PATA blocks will be muxed out and how.
+
+required:
+  - clocks
+  - clock-names
+  - cortina,gemini-ata-muxmode
+  - resets
+  - reset-names
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    sata@46000000 {
+      compatible = "cortina,gemini-sata-bridge";
+      reg = <0x46000000 0x100>;
+      resets = <&rcon 26>, <&rcon 27>;
+      reset-names = "sata0", "sata1";
+      clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+               <&gcc GEMINI_CLK_GATE_SATA1>;
+      clock-names = "SATA0_PCLK", "SATA1_PCLK";
+      syscon = <&syscon>;
+      cortina,gemini-ata-muxmode = <3>;
+      cortina,gemini-enable-ide-pins;
+      cortina,gemini-enable-sata-bridge;
+    };
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
index c060c7914cae..c4e4a9eab658 100644
--- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -26,6 +26,7 @@ properties:
       - items:
           - enum:
               - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a774e1     # RZ/G2H
               - renesas,sata-r8a7795      # R-Car H3
               - renesas,sata-r8a77965     # R-Car M3-N
           - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
index 7ac77b1c5850..58c9342b9925 100644
--- a/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -31,22 +31,27 @@ properties:
   "#size-cells":
     const: 0
 
+  dma-coherent: true
+
 patternProperties:
   "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/sata-port'
     description: |
       DT nodes for ports connected on the SATA host. The SATA port
       nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+  sata-port:
     type: object
 
     properties:
       reg:
         minimum: 0
-        maximum: 14
         description:
-          The ID number of the drive port SATA can potentially use a port
-          multiplier making it possible to connect up to 15 disks to a single
-          SATA port.
-
-additionalProperties: true
+          The ID number of the SATA port. Aside with being directly used,
+          each port can have a Port Multiplier attached thus allowing to
+          access more than one drive by means of a single SATA port.
 
 ...
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
index ce75d77e9289..f23f26a8f21c 100644
--- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -51,6 +51,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8
+    items:
+      maxItems: 2
 
   calxeda,tx-atten:
     description: |
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 000000000000..c1457910520b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..5afa4b57ce20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+      - description: Rockhip RK3568 AHCI controller
+        items:
+          - const: rockchip,rk3568-dwc-ahci
+          - const: snps,dwc-ahci
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index 863a287ebc7e..85c4a979aec4 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 Display Engine Bus Device Tree Bindings
+title: Allwinner A64 Display Engine Bus
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -35,7 +35,10 @@ properties:
       The SRAM that needs to be claimed to access the display engine
       bus.
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
   ranges: true
 
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 3d719f468a5b..bee5f53f837f 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 RSB Device Tree Bindings
+title: Allwinner A23 RSB
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
deleted file mode 100644
index 10f6d0a8159d..000000000000
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom GISB bus Arbiter controller
-
-Required properties:
-
-- compatible:
-    "brcm,bcm7278-gisb-arb" for V7 28nm chips
-    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
-    "brcm,bcm7435-gisb-arb" for newer 40nm chips
-    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
-    "brcm,bcm7038-gisb-arb" for 130nm chips
-- reg: specifies the base physical address and size of the registers
-- interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller. A third optional interrupt may be specified
-  for breakpoints.
-
-Optional properties:
-
-- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
-  masters are valid at the system level
-- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
-  masters. Should match the number of bits set in brcm,gisb-master-mask and
-  the order in which they appear
-
-Example:
-
-gisb-arb@f0400000 {
-	compatible = "brcm,gisb-arb";
-	reg = <0xf0400000 0x800>;
-	interrupts = <0>, <2>;
-	interrupt-parent = <&sun_l2_intc>;
-
-	brcm,gisb-arb-master-mask = <0x7>;
-	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
-};
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
new file mode 100644
index 000000000000..b23c3001991e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom GISB bus Arbiter controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7445-gisb-arb  # for other 28nm chips
+          - const: brcm,gisb-arb
+      - items:
+          - enum:
+              - brcm,bcm7278-gisb-arb  # for V7 28nm chips
+              - brcm,bcm7435-gisb-arb  # for newer 40nm chips
+              - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
+              - brcm,bcm7038-gisb-arb  # for 130nm chips
+              - brcm,gisb-arb          # fallback compatible
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: timeout interrupt line
+      - description: target abort interrupt line
+      - description: breakpoint interrupt line
+
+  brcm,gisb-arb-master-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      32-bits wide bitmask used to specify which GISB masters are valid at the
+      system level
+
+  brcm,gisb-arb-master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      String list of the litteral name of the GISB masters. Should match the
+      number of bits set in brcm,gisb-master-mask and the order in which they
+      appear from MSB to LSB.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gisb-arb@f0400000 {
+      compatible = "brcm,gisb-arb";
+      reg = <0xf0400000 0x800>;
+      interrupts = <0>, <2>;
+      interrupt-parent = <&sun_l2_intc>;
+      brcm,gisb-arb-master-mask = <0x7>;
+      brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+    };
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
index 7b1a08c62aef..d3ed048c9521 100644
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
@@ -21,6 +21,7 @@ properties:
       - const: nvidia,tegra210-aconnect
       - items:
           - enum:
+              - nvidia,tegra234-aconnect
               - nvidia,tegra186-aconnect
               - nvidia,tegra194-aconnect
           - const: nvidia,tegra210-aconnect
diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml
index f5cbfaf52d53..30fa6526cfc2 100644
--- a/Documentation/devicetree/bindings/bus/palmbus.yaml
+++ b/Documentation/devicetree/bindings/bus/palmbus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/palmbus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ralink PalmBus Device Tree Bindings
+title: Ralink PalmBus
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
new file mode 100644
index 000000000000..8e9e6ff35d7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
index bd40213302da..fced4082b047 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.yaml
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -35,7 +35,6 @@ properties:
       - items:
           - enum:
               - ti,sysc-omap2
-              - ti,sysc-omap2
               - ti,sysc-omap4
               - ti,sysc-omap4-simple
               - ti,sysc-omap2-timer
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
deleted file mode 100644
index 1cc3aa10dcb1..000000000000
--- a/Documentation/devicetree/bindings/chosen.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-The chosen node
----------------
-
-The chosen node does not represent a real device, but serves as a place
-for passing data between firmware and the operating system, like boot
-arguments. Data in the chosen node does not represent the hardware.
-
-The following properties are recognized:
-
-
-kaslr-seed
------------
-
-This property is used when booting with CONFIG_RANDOMIZE_BASE as the
-entropy used to randomize the kernel image base address location. Since
-it is used directly, this value is intended only for KASLR, and should
-not be used for other purposes (as it may leak information about KASLR
-offsets). It is parsed as a u64 value, e.g.
-
-/ {
-	chosen {
-		kaslr-seed = <0xfeedbeef 0xc0def00d>;
-	};
-};
-
-Note that if this property is set from UEFI (or a bootloader in EFI
-mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
-the Linux EFI stub (which will populate the property itself, using
-EFI_RNG_PROTOCOL).
-
-stdout-path
------------
-
-Device trees may specify the device to be used for boot console output
-with a stdout-path property under /chosen, as described in the Devicetree
-Specification, e.g.
-
-/ {
-	chosen {
-		stdout-path = "/serial@f00:115200";
-	};
-
-	serial@f00 {
-		compatible = "vendor,some-uart";
-		reg = <0xf00 0x10>;
-	};
-};
-
-If the character ":" is present in the value, this terminates the path.
-The meaning of any characters following the ":" is device-specific, and
-must be specified in the relevant binding documentation.
-
-For UART devices, the preferred binding is a string in the form:
-
-	<baud>{<parity>{<bits>{<flow>}}}
-
-where
-
-	baud	- baud rate in decimal
-	parity	- 'n' (none), 'o', (odd) or 'e' (even)
-	bits	- number of data bits
-	flow	- 'r' (rts)
-
-For example: 115200n8r
-
-Implementation note: Linux will look for the property "linux,stdout-path" or
-on PowerPC "stdout" if "stdout-path" is not found.  However, the
-"linux,stdout-path" and "stdout" properties are deprecated. New platforms
-should only use the "stdout-path" property.
-
-linux,booted-from-kexec
------------------------
-
-This property is set (currently only on PowerPC, and only needed on
-book3e) by some versions of kexec-tools to tell the new kernel that it
-is being booted by kexec, as the booting environment may differ (e.g.
-a different secondary CPU release mechanism)
-
-linux,usable-memory-range
--------------------------
-
-This property holds a base address and size, describing a limited region in
-which memory may be considered available for use by the kernel. Memory outside
-of this range is not available for use.
-
-This property describes a limitation: memory within this range is only
-valid when also described through another mechanism that the kernel
-would otherwise use to determine available memory (e.g. memory nodes
-or the EFI memory map). Valid memory may be sparse within the range.
-e.g.
-
-/ {
-	chosen {
-		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
-	};
-};
-
-The main usage is for crash dump kernel to identify its own usable
-memory and exclude, at its boot time, any other memory areas that are
-part of the panicked kernel's memory.
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,elfcorehdr
-----------------
-
-This property holds the memory range, the address and the size, of the elf
-core header which mainly describes the panicked kernel's memory layout as
-PT_LOAD segments of elf format.
-e.g.
-
-/ {
-	chosen {
-		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
-	};
-};
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,initrd-start and linux,initrd-end
----------------------------------------
-
-These properties hold the physical start and end address of an initrd that's
-loaded by the bootloader. Note that linux,initrd-start is inclusive, but
-linux,initrd-end is exclusive.
-e.g.
-
-/ {
-	chosen {
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
index 2d98f7c4d3bc..50ebd8c57795 100644
--- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -20,13 +20,24 @@ properties:
   compatible:
     const: google,cros-ec-typec
 
-  connector:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@[0-9a-f]+$':
     $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maxItems: 1
 
 required:
   - compatible
 
-additionalProperties: true #fixme
+additionalProperties: false
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
new file mode 100644
index 000000000000..5b875af6a95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-kbd-led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS keyboard backlight LED driver.
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+properties:
+  compatible:
+    const: google,cros-kbd-led-backlight
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+
+        kbd-led-backlight {
+          compatible = "google,cros-kbd-led-backlight";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..79b0752faa91
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
index 558db4b6ed17..93587b700476 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHB Clock Device Tree Bindings
+title: Allwinner A10 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
index b1e3d739beb2..e14e1aad9fd6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
index 51b7a6d4ea54..8a4747ebe0ba 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB1 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB1 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
index d801158e15de..aa08dd49dd61 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AXI Clock Device Tree Bindings
+title: Allwinner A10 AXI Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index c4b7243ddcf2..1690b9d99c3d 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Clock Control Unit Device Tree Bindings
+title: Allwinner Clock Control Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -34,6 +34,8 @@ properties:
       - allwinner,sun8i-v3-ccu
       - allwinner,sun8i-v3s-ccu
       - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
       - allwinner,sun50i-a100-ccu
@@ -79,6 +81,7 @@ if:
       enum:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
         - allwinner,sun50i-a64-r-ccu
         - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
@@ -99,6 +102,7 @@ else:
     properties:
       compatible:
         enum:
+          - allwinner,sun20i-d1-ccu
           - allwinner,sun50i-a100-ccu
           - allwinner,sun50i-h6-ccu
           - allwinner,sun50i-h616-ccu
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
index 0dfafba1a168..08d073520cfa 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU Clock Device Tree Bindings
+title: Allwinner A10 CPU Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
index 7484a7ab7dea..e665e50c1785 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Clock Device Tree Bindings
+title: Allwinner A10 Display Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index 9a37a357cb4e..c4714d0fbe07 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
index 18f131e262b4..e824e33489b6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MBUS Clock Device Tree Bindings
+title: Allwinner A10 MBUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
index 5199285a661a..c612f94befb9 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
index 3e2abe3e67c1..80ae3a7a588c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 0 Clock Device Tree Bindings
+title: Allwinner A10 Module 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
index 7ddb55c75cff..4f9a8d44d42a 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index c604822cda07..52a7b6e7124c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings
+title: Allwinner A10 Gatable Oscillator Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
index e5d9d45dab8a..b13a1f21d5da 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU PLL Device Tree Bindings
+title: Allwinner A10 CPU PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
index 4b80a42fb3da..418d207d23b8 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video PLL Device Tree Bindings
+title: Allwinner A10 Video PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
index 415bd77de53d..76ef3f0c7f2c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DRAM PLL Device Tree Bindings
+title: Allwinner A10 DRAM PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
index ec5652f76027..a94c93c90ece 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Peripheral PLL Device Tree Bindings
+title: Allwinner A10 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
index 0a335c615efd..6646b2a99fc1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings
+title: Allwinner A10 TCON Channel 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
index cd95d25bfe7c..5103b675e488 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 USB Clock Device Tree Bindings
+title: Allwinner A10 USB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
index 5dfd0c1c27b4..80337e38d6e5 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Clock Device Tree Bindings
+title: Allwinner A10 Video Engine Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
index 99add7991c48..c6a6fbb6863b 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 AHB Clock Device Tree Bindings
+title: Allwinner A13 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
index 5f377205af71..7d6a6a34d20c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Peripheral PLL Device Tree Bindings
+title: Allwinner A31 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
index 59e5dce1b65a..b6202de35707 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC TX Clock Device Tree Bindings
+title: Allwinner A20 GMAC TX Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
index c745733bcf04..fde7f7dc3d34 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Output Clock Device Tree Bindings
+title: Allwinner A20 Output Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
index e79eeac5f086..70369bd633e4 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+title: Allwinner A83t Display Engine 2/3 Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -28,6 +28,9 @@ properties:
       - items:
           - const: allwinner,sun8i-r40-de2-clk
           - const: allwinner,sun8i-h3-de2-clk
+      - items:
+          - const: allwinner,sun20i-d1-de2-clk
+          - const: allwinner,sun50i-h5-de2-clk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
index 3eb2bf65b230..45b9e2c7c1d1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
index d178da90aaec..f0f65af8ae22 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 AHB Clock Device Tree Bindings
+title: Allwinner A80 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
index 0351c79bd221..e9f9bc8f5794 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A80 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
index 24d5b2f1a314..c48db2d49340 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 CPUS Clock Device Tree Bindings
+title: Allwinner A80 CPUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
index a82c7c7e942b..e9f81a343be1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+title: Allwinner A80 Display Engine Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 43963c3062c8..d3ce5eb18d4e 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 GT Bus Clock Device Tree Bindings
+title: Allwinner A80 GT Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
index 20dc115fa211..65ee5afe83cc 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 MMC Configuration Clock Device Tree Bindings
+title: Allwinner A80 MMC Configuration Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
index b76bab6a30e9..261264a8aef6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Peripheral PLL Device Tree Bindings
+title: Allwinner A80 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
index 6532fb6821bc..515c15d5f661 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Clock Controller Device Tree Bindings
+title: Allwinner A80 USB Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
index 15218d10e78e..3f7b8d9511f1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Module Clock Device Tree Bindings
+title: Allwinner A80 USB Module Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
index 2569041684e6..0d49072d47ca 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB PHY Clock Device Tree Bindings
+title: Allwinner A80 USB PHY Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
index 4b8669f870ec..d98d95d8e8c9 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic DDR Clock Controller Device Tree Bindings
+title: Amlogic DDR Clock Controller
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml
new file mode 100644
index 000000000000..74eab5c0d24a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-nco
+          - apple,t8103-nco
+      - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
index 228c9313df53..f0f9392470a6 100644
--- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x58018000 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
index 08543ecbe35b..2d40df2d34df 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
+title: Broadcom BCM2711 HDMI DVP
 
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
index 7f5cf4001f76..998e5cce652f 100644
--- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 Clock Device Tree Bindings
+title: Canaan Kendryte K210 Clock
 
 maintainers:
   - Damien Le Moal <damien.lemoal@wdc.com>
diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 000000000000..82836086cac1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index f2ea53832ac6..6fe541368889 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -1,186 +1,2 @@
-This binding is a work-in-progress, and are based on some experimental
-work by benh[1].
-
-Sources of clock signal can be represented by any node in the device
-tree.  Those nodes are designated as clock providers.  Clock consumer
-nodes use a phandle and clock specifier pair to connect clock provider
-outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of zero, one or more cells identifying the clock
-output on a device.  The length of a clock specifier is defined by the
-value of a #clock-cells property in the clock provider node.
-
-[1] https://patchwork.ozlabs.org/patch/31551/
-
-==Clock providers==
-
-Required properties:
-#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
-		   with a single clock output and 1 for nodes with multiple
-		   clock outputs.
-
-Optional properties:
-clock-output-names: Recommended to be a list of strings of clock output signal
-		    names indexed by the first cell in the clock specifier.
-		    However, the meaning of clock-output-names is domain
-		    specific to the clock provider, and is only provided to
-		    encourage using the same meaning for the majority of clock
-		    providers.  This format may not work for clock providers
-		    using a complex clock specifier format.  In those cases it
-		    is recommended to omit this property and create a binding
-		    specific names property.
-
-		    Clock consumer nodes must never directly reference
-		    the provider's clock-output-names property.
-
-For example:
-
-    oscillator {
-        #clock-cells = <1>;
-        clock-output-names = "ckil", "ckih";
-    };
-
-- this node defines a device with two clock outputs, the first named
-  "ckil" and the second named "ckih".  Consumer nodes always reference
-  clocks by index. The names should reflect the clock output signal
-  names for the device.
-
-clock-indices:	   If the identifying number for the clocks in the node
-		   is not linear from zero, then this allows the mapping of
-		   identifiers into the clock-output-names array.
-
-For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
-
-	oscillator {
-		compatible = "myclocktype";
-		#clock-cells = <1>;
-		clock-indices = <1>, <3>;
-		clock-output-names = "clka", "clkb";
-	}
-
-	This ensures we do not have any empty strings in clock-output-names
-
-
-==Clock consumers==
-
-Required properties:
-clocks:		List of phandle and clock specifier pairs, one pair
-		for each clock input to the device.  Note: if the
-		clock provider specifies '0' for #clock-cells, then
-		only the phandle portion of the pair will appear.
-
-Optional properties:
-clock-names:	List of clock input name strings sorted in the same
-		order as the clocks property.  Consumers drivers
-		will use clock-names to match clock input names
-		with clocks specifiers.
-clock-ranges:	Empty property indicating that child nodes can inherit named
-		clocks from this node. Useful for bus nodes to provide a
-		clock to their children.
-
-For example:
-
-    device {
-        clocks = <&osc 1>, <&ref 0>;
-        clock-names = "baud", "register";
-    };
-
-
-This represents a device with two clock inputs, named "baud" and "register".
-The baud clock is connected to output 1 of the &osc device, and the register
-clock is connected to output 0 of the &ref.
-
-==Example==
-
-    /* external oscillator */
-    osc: oscillator {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency  = <32678>;
-        clock-output-names = "osc";
-    };
-
-    /* phase-locked-loop device, generates a higher frequency clock
-     * from the external oscillator reference */
-    pll: pll@4c000 {
-        compatible = "vendor,some-pll-interface"
-        #clock-cells = <1>;
-        clocks = <&osc 0>;
-        clock-names = "ref";
-        reg = <0x4c000 0x1000>;
-        clock-output-names = "pll", "pll-switched";
-    };
-
-    /* UART, using the low frequency oscillator for the baud clock,
-     * and the high frequency switched PLL output for register
-     * clocking */
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        interrupts = <33>;
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-    };
-
-This DT fragment defines three devices: an external oscillator to provide a
-low-frequency reference clock, a PLL device to generate a higher frequency
-clock signal, and a UART.
-
-* The oscillator is fixed-frequency, and provides one clock output, named "osc".
-* The PLL is both a clock provider and a clock consumer. It uses the clock
-  signal generated by the external oscillator, and provides two output signals
-  ("pll" and "pll-switched").
-* The UART has its baud clock connected the external oscillator and its
-  register clock connected to the PLL clock (the "pll-switched" signal)
-
-==Assigned clock parents and rates==
-
-Some platforms may require initial configuration of default parent clocks
-and clock frequencies. Such a configuration can be specified in a device tree
-node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
-properties. The assigned-clock-parents property should contain a list of parent
-clocks in the form of a phandle and clock specifier pair and the
-assigned-clock-rates property should contain a list of frequencies in Hz. Both
-these properties should correspond to the clocks listed in the assigned-clocks
-property.
-
-To skip setting parent or rate of a clock its corresponding entry should be
-set to 0, or can be omitted if it is not followed by any non-zero entry.
-
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        ...
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-
-        assigned-clocks = <&clkcon 0>, <&pll 2>;
-        assigned-clock-parents = <&pll 2>;
-        assigned-clock-rates = <0>, <460800>;
-    };
-
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
-
-Configuring a clock's parent and rate through the device node that consumes
-the clock can be done only for clocks that have a single user. Specifying
-conflicting parent or rate configuration in multiple consumer nodes for
-a shared clock is forbidden.
-
-Configuration of common clocks, which affect multiple consumer devices can
-be similarly specified in the clock provider node.
-
-==Protected clocks==
-
-Some platforms or firmwares may not fully expose all the clocks to the OS, such
-as in situations where those clks are used by drivers running in ARM secure
-execution levels. Such a configuration can be specified in device tree with the
-protected-clocks property in the form of a clock specifier list. This property should
-only be specified in the node that is providing the clocks being protected:
-
-   clock-controller@a000f000 {
-        compatible = "vendor,clk95;
-        reg = <0xa000f000 0x1000>
-        #clocks-cells = <1>;
-        ...
-        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
-   };
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
deleted file mode 100644
index 54e6df0bee8a..000000000000
--- a/Documentation/devicetree/bindings/clock/cs2000-cp.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
-
-Required properties:
-
-- compatible:		"cirrus,cs2000-cp"
-- reg:			The chip select number on the I2C bus
-- clocks:		common clock binding for CLK_IN, XTI/REF_CLK
-- clock-names:		CLK_IN : clk_in, XTI/REF_CLK : ref_clk
-- #clock-cells:		must be <0>
-
-Example:
-
-&i2c2 {
-	...
-	cs2000: clk_multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&rcar_sound 0>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/efm32-clock.txt b/Documentation/devicetree/bindings/clock/efm32-clock.txt
deleted file mode 100644
index 263d293f6a10..000000000000
--- a/Documentation/devicetree/bindings/clock/efm32-clock.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
-
-Required properties:
-- compatible: Should be "efm32gg,cmu"
-- reg: Base address and length of the register set
-- interrupts: Interrupt used by the CMU
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock ID in
-its "clocks" phandle cell. The header efm32-clk.h contains a list of available
-IDs.
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
deleted file mode 100644
index c79d31f7f66e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-* Samsung Exynos5260 Clock Controller
-
-Exynos5260 has 13 clock controllers which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5260-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
- - "xrtcxti" - input clock from XRTCXTI
- - "ioclk_pcm_extclk" - pcm external operation clock
- - "ioclk_spdif_extclk" - spdif external operation clock
- - "ioclk_i2s_cdclk" - i2s0 codec clock
-
-Phy clocks:
-
-There are several clocks which are generated by specific PHYs.
-These clocks are fed into the clock controller and then routed to
-the hardware blocks. These clocks are defined as fixed clocks in the
-driver with following names:
-
- - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
- - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
- - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
- - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
- - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
- - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
- - "phyclk_dptx_phy_clk_div2"
- - "phyclk_mipi_dphy_4l_m_rxclkesc0"
- - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
- - "phyclk_usbhost20_phy_freeclk"
- - "phyclk_usbhost20_phy_clk48mohci"
- - "phyclk_usbdrd30_udrd30_pipe_pclk"
- - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
-
-Required Properties for Clock Controller:
-
- - compatible: should be one of the following.
-	1) "samsung,exynos5260-clock-top"
-	2) "samsung,exynos5260-clock-peri"
-	3) "samsung,exynos5260-clock-egl"
-	4) "samsung,exynos5260-clock-kfc"
-	5) "samsung,exynos5260-clock-g2d"
-	6) "samsung,exynos5260-clock-mif"
-	7) "samsung,exynos5260-clock-mfc"
-	8) "samsung,exynos5260-clock-g3d"
-	9) "samsung,exynos5260-clock-fsys"
-	10) "samsung,exynos5260-clock-aud"
-	11) "samsung,exynos5260-clock-isp"
-	12) "samsung,exynos5260-clock-gscl"
-	13) "samsung,exynos5260-clock-disp"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-
- - clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top clock controller:
-	- fin_pll
-	- dout_mem_pll
-	- dout_bus_pll
-	- dout_media_pll
-
-Input clocks for peri clock controller:
-	- fin_pll
-	- ioclk_pcm_extclk
-	- ioclk_i2s_cdclk
-	- ioclk_spdif_extclk
-	- phyclk_hdmi_phy_ref_cko
-	- dout_aclk_peri_66
-	- dout_sclk_peri_uart0
-	- dout_sclk_peri_uart1
-	- dout_sclk_peri_uart2
-	- dout_sclk_peri_spi0_b
-	- dout_sclk_peri_spi1_b
-	- dout_sclk_peri_spi2_b
-	- dout_aclk_peri_aud
-	- dout_sclk_peri_spi0_b
-
-Input clocks for egl clock controller:
-	- fin_pll
-	- dout_bus_pll
-
-Input clocks for kfc clock controller:
-	- fin_pll
-	- dout_media_pll
-
-Input clocks for g2d clock controller:
-	- fin_pll
-	- dout_aclk_g2d_333
-
-Input clocks for mif clock controller:
-	- fin_pll
-
-Input clocks for mfc clock controller:
-	- fin_pll
-	- dout_aclk_mfc_333
-
-Input clocks for g3d clock controller:
-	- fin_pll
-
-Input clocks for fsys clock controller:
-	- fin_pll
-	- phyclk_usbhost20_phy_phyclock
-	- phyclk_usbhost20_phy_freeclk
-	- phyclk_usbhost20_phy_clk48mohci
-	- phyclk_usbdrd30_udrd30_pipe_pclk
-	- phyclk_usbdrd30_udrd30_phyclock
-	- dout_aclk_fsys_200
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
-	- ioclk_i2s_cdclk
-	- ioclk_pcm_extclk
-
-Input clocks for isp clock controller:
-	- fin_pll
-	- dout_aclk_isp1_266
-	- dout_aclk_isp1_400
-	- mout_aclk_isp1_266
-
-Input clocks for gscl clock controller:
-	- fin_pll
-	- dout_aclk_gscl_400
-	- dout_aclk_gscl_333
-
-Input clocks for disp clock controller:
-	- fin_pll
-	- phyclk_dptx_phy_ch3_txd_clk
-	- phyclk_dptx_phy_ch2_txd_clk
-	- phyclk_dptx_phy_ch1_txd_clk
-	- phyclk_dptx_phy_ch0_txd_clk
-	- phyclk_hdmi_phy_tmds_clko
-	- phyclk_hdmi_phy_ref_clko
-	- phyclk_hdmi_phy_pixel_clko
-	- phyclk_hdmi_link_o_tmds_clkhi
-	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
-	- phyclk_dptx_phy_o_ref_clk_24m
-	- phyclk_dptx_phy_clk_div2
-	- phyclk_mipi_dphy_4l_m_rxclkesc0
-	- phyclk_hdmi_phy_ref_cko
-	- ioclk_spdif_extclk
-	- dout_aclk_peri_aud
-	- dout_aclk_disp_222
-	- dout_sclk_disp_pixel
-	- dout_aclk_disp_333
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock_mfc: clock-controller@11090000 {
-		compatible = "samsung,exynos5260-clock-mfc";
-		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
-		clock-names = "fin_pll", "dout_aclk_mfc_333";
-		reg = <0x11090000 0x10000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the
-		peri clock controller. Refer to the standard clock bindings for
-		information about 'clocks' and 'clock-names' property.
-
-	serial@12c00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 146 0>;
-		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
deleted file mode 100644
index 217beb27c30e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos5410 Clock Controller
-
-The Exynos5410 clock controller generates and supplies clock to various
-controllers within the Exynos5410 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5410-clock"
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: should contain an entry specifying the root clock from external
-  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
-  defined using standard clock bindings with "fin_pll" clock-output-name.
-  That clock is being passed internally to the 9 PLLs.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5410.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5410-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-		clocks = <&fin_pll>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@12c20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
deleted file mode 100644
index 183c327a7d6b..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ /dev/null
@@ -1,507 +0,0 @@
-* Samsung Exynos5433 CMU (Clock Management Units)
-
-The Exynos5433 clock controller generates and supplies clock to various
-controllers within the Exynos5433 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5433-cmu-top"   - clock controller compatible for CMU_TOP
-    which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
-    domains and bus clocks.
-  - "samsung,exynos5433-cmu-cpif"  - clock controller compatible for CMU_CPIF
-    which generates clocks for LLI (Low Latency Interface) IP.
-  - "samsung,exynos5433-cmu-mif"   - clock controller compatible for CMU_MIF
-    which generates clocks for DRAM Memory Controller domain.
-  - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
-    which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
-  - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
-    which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
-  - "samsung,exynos5433-cmu-fsys"  - clock controller compatible for CMU_FSYS
-    which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
-  - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
-    which generates clocks for G2D/MDMA IPs.
-  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
-    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
-  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
-    which generates clocks for Cortex-A5/BUS/AUDIO clocks.
-  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
-    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
-    which generates global data buses clock and global peripheral buses clock.
-  - "samsung,exynos5433-cmu-g3d"  - clock controller compatible for CMU_G3D
-    which generates clocks for 3D Graphics Engine IP.
-  - "samsung,exynos5433-cmu-gscl"  - clock controller compatible for CMU_GSCL
-    which generates clocks for GSCALER IPs.
-  - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
-    which generates clocks for Cortex-A53 Quad-core processor.
-  - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
-    which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
-    L2 cache controller.
-  - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
-    which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
-  - "samsung,exynos5433-cmu-mfc"  - clock controller compatible for CMU_MFC
-    which generates clocks for MFC(Multi-Format Codec) IP.
-  - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
-    which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
-  - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
-    which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
-  - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
-    which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
-    IPs.
-  - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
-    which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
-  - "samsung,exynos5433-cmu-imem"   - clock controller compatible for CMU_IMEM
-    which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-	from common clock bindings. Please refer the next section
-	to find the input clocks for a given controller.
-
-- clock-names: list of the clock controller input clock names,
-	as described in clock-bindings.txt.
-
-	Input clocks for top clock controller:
-		- oscclk
-		- sclk_mphy_pll
-		- sclk_mfc_pll
-		- sclk_bus_pll
-
-	Input clocks for cpif clock controller:
-		- oscclk
-
-	Input clocks for mif clock controller:
-		- oscclk
-		- sclk_mphy_pll
-
-	Input clocks for fsys clock controller:
-		- oscclk
-		- sclk_ufs_mphy
-		- aclk_fsys_200
-		- sclk_pcie_100_fsys
-		- sclk_ufsunipro_fsys
-		- sclk_mmc2_fsys
-		- sclk_mmc1_fsys
-		- sclk_mmc0_fsys
-		- sclk_usbhost30_fsys
-		- sclk_usbdrd30_fsys
-
-	Input clocks for g2d clock controller:
-		- oscclk
-		- aclk_g2d_266
-		- aclk_g2d_400
-
-	Input clocks for disp clock controller:
-		- oscclk
-		- sclk_dsim1_disp
-		- sclk_dsim0_disp
-		- sclk_dsd_disp
-		- sclk_decon_tv_eclk_disp
-		- sclk_decon_vclk_disp
-		- sclk_decon_eclk_disp
-		- sclk_decon_tv_vclk_disp
-		- aclk_disp_333
-
-	Input clocks for audio clock controller:
-		- oscclk
-		- fout_aud_pll
-
-	Input clocks for bus0 clock controller:
-		- aclk_bus0_400
-
-	Input clocks for bus1 clock controller:
-		- aclk_bus1_400
-
-	Input clocks for bus2 clock controller:
-		- oscclk
-		- aclk_bus2_400
-
-	Input clocks for g3d clock controller:
-		- oscclk
-		- aclk_g3d_400
-
-	Input clocks for gscl clock controller:
-		- oscclk
-		- aclk_gscl_111
-		- aclk_gscl_333
-
-	Input clocks for apollo clock controller:
-		- oscclk
-		- sclk_bus_pll_apollo
-
-	Input clocks for atlas clock controller:
-		- oscclk
-		- sclk_bus_pll_atlas
-
-	Input clocks for mscl clock controller:
-		- oscclk
-		- sclk_jpeg_mscl
-		- aclk_mscl_400
-
-	Input clocks for mfc clock controller:
-		- oscclk
-		- aclk_mfc_400
-
-	Input clocks for hevc clock controller:
-		- oscclk
-		- aclk_hevc_400
-
-	Input clocks for isp clock controller:
-		- oscclk
-		- aclk_isp_dis_400
-		- aclk_isp_400
-
-	Input clocks for cam0 clock controller:
-		- oscclk
-		- aclk_cam0_333
-		- aclk_cam0_400
-		- aclk_cam0_552
-
-	Input clocks for cam1 clock controller:
-		- oscclk
-		- sclk_isp_uart_cam1
-		- sclk_isp_spi1_cam1
-		- sclk_isp_spi0_cam1
-		- aclk_cam1_333
-		- aclk_cam1_400
-		- aclk_cam1_552
-
-	Input clocks for imem clock controller:
-		- oscclk
-		- aclk_imem_sssx_266
-		- aclk_imem_266
-		- aclk_imem_200
-
-Optional properties:
-  - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
-	information).
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5433.h header and can be used in device
-tree sources.
-
-Example 1: Examples of 'oscclk' source clock node are listed below.
-
-	xxti: xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "oscclk";
-		#clock-cells = <0>;
-	};
-
-Example 2: Examples of clock controller nodes are listed below.
-
-	cmu_top: clock-controller@10030000 {
-		compatible = "samsung,exynos5433-cmu-top";
-		reg = <0x10030000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll",
-			"sclk_mfc_pll",
-			"sclk_bus_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>,
-		       <&cmu_mif CLK_SCLK_MFC_PLL>,
-		       <&cmu_mif CLK_SCLK_BUS_PLL>;
-	};
-
-	cmu_cpif: clock-controller@10fc0000 {
-		compatible = "samsung,exynos5433-cmu-cpif";
-		reg = <0x10fc0000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk";
-		clocks = <&xxti>;
-	};
-
-	cmu_mif: clock-controller@105b0000 {
-		compatible = "samsung,exynos5433-cmu-mif";
-		reg = <0x105b0000 0x100c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>;
-	};
-
-	cmu_peric: clock-controller@14c80000 {
-		compatible = "samsung,exynos5433-cmu-peric";
-		reg = <0x14c80000 0x0b08>;
-		#clock-cells = <1>;
-	};
-
-	cmu_peris: clock-controller@10040000 {
-		compatible = "samsung,exynos5433-cmu-peris";
-		reg = <0x10040000 0x0b20>;
-		#clock-cells = <1>;
-	};
-
-	cmu_fsys: clock-controller@156e0000 {
-		compatible = "samsung,exynos5433-cmu-fsys";
-		reg = <0x156e0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_ufs_mphy",
-			"aclk_fsys_200",
-			"sclk_pcie_100_fsys",
-			"sclk_ufsunipro_fsys",
-			"sclk_mmc2_fsys",
-			"sclk_mmc1_fsys",
-			"sclk_mmc0_fsys",
-			"sclk_usbhost30_fsys",
-			"sclk_usbdrd30_fsys";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_ACLK_FSYS_200>,
-		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
-		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC1_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC0_FSYS>,
-		       <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		       <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
-	};
-
-	cmu_g2d: clock-controller@12460000 {
-		compatible = "samsung,exynos5433-cmu-g2d";
-		reg = <0x12460000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_g2d_266",
-			"aclk_g2d_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_G2D_266>,
-		       <&cmu_top CLK_ACLK_G2D_400>;
-		power-domains = <&pd_g2d>;
-	};
-
-	cmu_disp: clock-controller@13b90000 {
-		compatible = "samsung,exynos5433-cmu-disp";
-		reg = <0x13b90000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_dsim1_disp",
-			"sclk_dsim0_disp",
-			"sclk_dsd_disp",
-			"sclk_decon_tv_eclk_disp",
-			"sclk_decon_vclk_disp",
-			"sclk_decon_eclk_disp",
-			"sclk_decon_tv_vclk_disp",
-			"aclk_disp_333";
-		clocks = <&xxti>,
-		       <&cmu_mif CLK_SCLK_DSIM1_DISP>,
-		       <&cmu_mif CLK_SCLK_DSIM0_DISP>,
-		       <&cmu_mif CLK_SCLK_DSD_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
-		       <&cmu_mif CLK_ACLK_DISP_333>;
-		power-domains = <&pd_disp>;
-	};
-
-	cmu_aud: clock-controller@114c0000 {
-		compatible = "samsung,exynos5433-cmu-aud";
-		reg = <0x114c0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "fout_aud_pll";
-		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
-		power-domains = <&pd_aud>;
-	};
-
-	cmu_bus0: clock-controller@13600000 {
-		compatible = "samsung,exynos5433-cmu-bus0";
-		reg = <0x13600000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus0_400";
-		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
-	};
-
-	cmu_bus1: clock-controller@14800000 {
-		compatible = "samsung,exynos5433-cmu-bus1";
-		reg = <0x14800000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus1_400";
-		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
-	};
-
-	cmu_bus2: clock-controller@13400000 {
-		compatible = "samsung,exynos5433-cmu-bus2";
-		reg = <0x13400000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_bus2_400";
-		clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
-	};
-
-	cmu_g3d: clock-controller@14aa0000 {
-		compatible = "samsung,exynos5433-cmu-g3d";
-		reg = <0x14aa0000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_g3d_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
-		power-domains = <&pd_g3d>;
-	};
-
-	cmu_gscl: clock-controller@13cf0000 {
-		compatible = "samsung,exynos5433-cmu-gscl";
-		reg = <0x13cf0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_gscl_111",
-			"aclk_gscl_333";
-		clocks = <&xxti>,
-			<&cmu_top CLK_ACLK_GSCL_111>,
-			<&cmu_top CLK_ACLK_GSCL_333>;
-		power-domains = <&pd_gscl>;
-	};
-
-	cmu_apollo: clock-controller@11900000 {
-		compatible = "samsung,exynos5433-cmu-apollo";
-		reg = <0x11900000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_apollo";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
-	};
-
-	cmu_atlas: clock-controller@11800000 {
-		compatible = "samsung,exynos5433-cmu-atlas";
-		reg = <0x11800000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_atlas";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
-	};
-
-	cmu_mscl: clock-controller@105d0000 {
-		compatible = "samsung,exynos5433-cmu-mscl";
-		reg = <0x105d0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_jpeg_mscl",
-			"aclk_mscl_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_JPEG_MSCL>,
-		       <&cmu_top CLK_ACLK_MSCL_400>;
-		power-domains = <&pd_mscl>;
-	};
-
-	cmu_mfc: clock-controller@15280000 {
-		compatible = "samsung,exynos5433-cmu-mfc";
-		reg = <0x15280000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_mfc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
-		power-domains = <&pd_mfc>;
-	};
-
-	cmu_hevc: clock-controller@14f80000 {
-		compatible = "samsung,exynos5433-cmu-hevc";
-		reg = <0x14f80000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_hevc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
-		power-domains = <&pd_hevc>;
-	};
-
-	cmu_isp: clock-controller@146d0000 {
-		compatible = "samsung,exynos5433-cmu-isp";
-		reg = <0x146d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_isp_dis_400",
-			"aclk_isp_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_ISP_DIS_400>,
-		       <&cmu_top CLK_ACLK_ISP_400>;
-		power-domains = <&pd_isp>;
-	};
-
-	cmu_cam0: clock-controller@120d0000 {
-		compatible = "samsung,exynos5433-cmu-cam0";
-		reg = <0x120d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_cam0_333",
-			"aclk_cam0_400",
-			"aclk_cam0_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_CAM0_333>,
-		       <&cmu_top CLK_ACLK_CAM0_400>,
-		       <&cmu_top CLK_ACLK_CAM0_552>;
-		power-domains = <&pd_cam0>;
-	};
-
-	cmu_cam1: clock-controller@145d0000 {
-		compatible = "samsung,exynos5433-cmu-cam1";
-		reg = <0x145d0000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_isp_uart_cam1",
-			"sclk_isp_spi1_cam1",
-			"sclk_isp_spi0_cam1",
-			"aclk_cam1_333",
-			"aclk_cam1_400",
-			"aclk_cam1_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
-		       <&cmu_top CLK_ACLK_CAM1_333>,
-		       <&cmu_top CLK_ACLK_CAM1_400>,
-		       <&cmu_top CLK_ACLK_CAM1_552>;
-		power-domains = <&pd_cam1>;
-	};
-
-	cmu_imem: clock-controller@11060000 {
-		compatible = "samsung,exynos5433-cmu-imem";
-		reg = <0x11060000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_imem_sssx_266",
-			"aclk_imem_266",
-			"aclk_imem_200";
-		clocks = <&xxti>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_200>;
-	};
-
-Example 3: UART controller node that consumes the clock generated by the clock
-	   controller.
-
-	serial_0: serial@14c10000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x14C10000 0x100>;
-		interrupts = <0 421 0>;
-		clocks = <&cmu_peric CLK_PCLK_UART0>,
-			 <&cmu_peric CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_bus>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
deleted file mode 100644
index 6bf1e7493f61..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-* Samsung Exynos7 Clock Controller
-
-Exynos7 clock controller has various blocks which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos7-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
-
-Required Properties for Clock Controller:
-
- - compatible: clock controllers will use one of the following
-	compatible strings to indicate the clock controller
-	functionality.
-
-	- "samsung,exynos7-clock-topc"
-	- "samsung,exynos7-clock-top0"
-	- "samsung,exynos7-clock-top1"
-	- "samsung,exynos7-clock-ccore"
-	- "samsung,exynos7-clock-peric0"
-	- "samsung,exynos7-clock-peric1"
-	- "samsung,exynos7-clock-peris"
-	- "samsung,exynos7-clock-fsys0"
-	- "samsung,exynos7-clock-fsys1"
-	- "samsung,exynos7-clock-mscl"
-	- "samsung,exynos7-clock-aud"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to
-	find the input clocks for a given controller.
-
-- clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top0 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-	- dout_sclk_aud_pll
-
-Input clocks for top1 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-
-Input clocks for ccore clock controller:
-	- fin_pll
-	- dout_aclk_ccore_133
-
-Input clocks for peric0 clock controller:
-	- fin_pll
-	- dout_aclk_peric0_66
-	- sclk_uart0
-
-Input clocks for peric1 clock controller:
-	- fin_pll
-	- dout_aclk_peric1_66
-	- sclk_uart1
-	- sclk_uart2
-	- sclk_uart3
-	- sclk_spi0
-	- sclk_spi1
-	- sclk_spi2
-	- sclk_spi3
-	- sclk_spi4
-	- sclk_i2s1
-	- sclk_pcm1
-	- sclk_spdif
-
-Input clocks for peris clock controller:
-	- fin_pll
-	- dout_aclk_peris_66
-
-Input clocks for fsys0 clock controller:
-	- fin_pll
-	- dout_aclk_fsys0_200
-	- dout_sclk_mmc2
-
-Input clocks for fsys1 clock controller:
-	- fin_pll
-	- dout_aclk_fsys1_200
-	- dout_sclk_mmc0
-	- dout_sclk_mmc1
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
index f415845b38dd..0b02378a3a0c 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -13,7 +13,6 @@ maintainers:
 properties:
   compatible:
     enum:
-      - allwinner,sun4i-a10-pll3-2x-clk
       - fixed-factor-clock
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 000000000000..f2c48460a399
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
deleted file mode 100644
index d3379ff9b84b..000000000000
--- a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for simple gpio gated clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "gpio-gate-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- enable-gpios : GPIO reference for enabling and disabling the clock.
-
-Optional properties:
-- clocks: Maximum of one parent clock is supported.
-
-Example:
-	clock {
-		compatible = "gpio-gate-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
new file mode 100644
index 000000000000..d09d0e3f0c6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index ffd6ae0eed64..f9ba9864d8b5 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -45,7 +45,7 @@ description: |
   The case where SH and SP are both 1 is likely not very interesting.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 properties:
   compatible:
@@ -56,6 +56,7 @@ properties:
       - idt,5p49v5935
       - idt,5p49v6901
       - idt,5p49v6965
+      - idt,5p49v6975
 
   reg:
     description: I2C device address
@@ -108,7 +109,7 @@ patternProperties:
     properties:
       idt,mode:
         description:
-          The output drive mode. Values defined in dt-bindings/clk/versaclock.h
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 6
@@ -134,6 +135,7 @@ allOf:
           enum:
             - idt,5p49v5933
             - idt,5p49v5935
+            - idt,5p49v6975
     then:
       # Devices with builtin crystal + optional external input
       properties:
@@ -151,7 +153,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/versaclock.h>
+    #include <dt-bindings/clock/versaclock.h>
 
     /* 25MHz reference crystal */
     ref25: ref25m {
@@ -191,11 +193,4 @@ examples:
         };
     };
 
-    /* Consumer referencing the 5P49V5923 pin OUT1 */
-    consumer {
-        /* ... */
-        clocks = <&vc5 1>;
-        /* ... */
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
index f4833a29b79e..56f524780b1a 100644
--- a/Documentation/devicetree/bindings/clock/imx1-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -40,12 +40,3 @@ examples:
         compatible = "fsl,imx1-ccm";
         reg = <0x0021b000 0x1000>;
     };
-
-    pwm@208000 {
-        #pwm-cells = <2>;
-        compatible = "fsl,imx1-pwm";
-        reg = <0x00208000 0x1000>;
-        interrupts = <34>;
-        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
index 518ad9a4733c..e2d50544700a 100644
--- a/Documentation/devicetree/bindings/clock/imx21-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -40,12 +40,3 @@ examples:
         reg = <0x10027000 0x800>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-                 <&clks IMX21_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index 5e296a00e14f..7e890ab9c77d 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -83,12 +83,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006c000 {
-        compatible = "fsl,imx23-auart";
-        reg = <0x8006c000 0x2000>;
-        interrupts = <24>;
-        clocks = <&clks 32>;
-        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-        dma-names = "rx", "tx";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
index 2a2b10778e72..1792e138984b 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -176,11 +176,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 79>, <&clks 50>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
index 160268f24487..99925aa22a4c 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -44,12 +44,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-                 <&clks IMX27_CLK_PER1_GATE>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index f831b780f951..a542d680b1ca 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -106,12 +106,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006a000 {
-        compatible = "fsl,imx28-auart";
-        reg = <0x8006a000 0x2000>;
-        interrupts = <112>;
-        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-        dma-names = "rx", "tx";
-        clocks = <&clks 45>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
index d2336261c922..168c8ada5e81 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -110,11 +110,3 @@ examples:
         interrupts = <31>, <53>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 10>, <&clks 30>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
index 3e20ccaf8131..6415bb6a8d04 100644
--- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -129,11 +129,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    mmc@53fb4000 {
-        compatible = "fsl,imx35-esdhc";
-        reg = <0x53fb4000 0x4000>;
-        interrupts = <7>;
-        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-        clock-names = "ipg", "ahb", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index b1740d7abe68..c0e19ff92c76 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -55,11 +55,4 @@ examples:
                      <0 72 IRQ_TYPE_LEVEL_HIGH>;
         #clock-cells = <1>;
     };
-
-    can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-        reg = <0x53fc8000 0x4000>;
-        interrupts = <82>;
-        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-        clock-names = "ipg", "per";
-    };
+...
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
index 7caf5cee9199..739c3378f8c8 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -108,14 +108,3 @@ examples:
                        "upll", "sosc_bus_clk", "firc_bus_clk",
                        "rosc", "spll_bus_clk";
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
index ee8efb4ed599..d06344d7e34f 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -86,14 +86,3 @@ examples:
                       "firc", "upll";
         #clock-cells = <1>;
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index 625f573a7b90..458c7645ee68 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -55,8 +55,6 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 7
-          maxItems: 7
           items:
             - description: 32k osc
             - description: 25m osc
@@ -66,8 +64,6 @@ allOf:
             - description: ext3 clock input
             - description: ext4 clock input
         clock-names:
-          minItems: 7
-          maxItems: 7
           items:
             - const: ckil
             - const: osc_25m
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 0f6fe365ebf3..cb80105b3c70 100644
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -101,14 +101,3 @@ examples:
                              "sdhc0_lpcg_ahb_clk";
         power-domains = <&pd IMX_SC_R_SDHC_0>;
     };
-
-    mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-        reg = <0x5b010000 0x10000>;
-        clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-        clock-names = "ipg", "ahb", "per";
-        power-domains = <&pd IMX_SC_R_SDHC_0>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
new file mode 100644
index 000000000000..21a06194e4a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module Binding
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 000000000000..03fc5c1a2939
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MXRT
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
deleted file mode 100644
index 9f4ec5cb5c6b..000000000000
--- a/Documentation/devicetree/bindings/clock/intc_stratix10.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be
-	"intel,stratix10-clkmgr"
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-
-- #clock-cells : from common clock binding, shall be set to 1.
-
-Example:
-	clkmgr: clock-controller@ffd10000 {
-		compatible = "intel,stratix10-clkmgr";
-		reg = <0xffd10000 0x1000>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
new file mode 100644
index 000000000000..f506e3db9782
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller binding
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 000000000000..175f5c8f2bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 000000000000..731bfe0408c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek apmixedsys controller provides PLLs to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-apmixedsys
+          - mediatek,mt7622-apmixedsys
+          - mediatek,mt7986-apmixedsys
+          - mediatek,mt8135-apmixedsys
+          - mediatek,mt8173-apmixedsys
+          - mediatek,mt8516-apmixedsys
+      - items:
+          - const: mediatek,mt7623-apmixedsys
+          - const: mediatek,mt2701-apmixedsys
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-apmixedsys
+              - mediatek,mt2712-apmixedsys
+              - mediatek,mt6765-apmixedsys
+              - mediatek,mt6779-apmixedsys
+              - mediatek,mt6795-apmixedsys
+              - mediatek,mt7629-apmixedsys
+              - mediatek,mt8167-apmixedsys
+              - mediatek,mt8183-apmixedsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys: clock-controller@10209000 {
+        compatible = "mediatek,mt8173-apmixedsys";
+        reg = <0x10209000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
new file mode 100644
index 000000000000..04469eabc8fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
new file mode 100644
index 000000000000..378b761237d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system
+  configuration like reset and bus protection on MT6795.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt6795-apmixedsys
+          - mediatek,mt6795-infracfg
+          - mediatek,mt6795-pericfg
+          - mediatek,mt6795-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        topckgen: clock-controller@10000000 {
+            compatible = "mediatek,mt6795-topckgen", "syscon";
+            reg = <0 0x10000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd763..b42f0f5c11b7 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MT7621 Clock Device Tree Bindings
+title: MT7621 Clock
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
@@ -22,6 +22,11 @@ description: |
 
   The clocks are provided inside a system controller node.
 
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
 properties:
   compatible:
     items:
@@ -37,6 +42,12 @@ properties:
       clocks.
     const: 1
 
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
   ralink,memctl:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -61,6 +72,7 @@ examples:
       compatible = "mediatek,mt7621-sysc", "syscon";
       reg = <0x0 0x100>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
       ralink,memctl = <&memc>;
       clock-output-names = "xtal", "cpu", "bus",
                            "50m", "125m", "150m",
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
new file mode 100644
index 000000000000..b327ecb4e524
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
new file mode 100644
index 000000000000..643f84660c8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 000000000000..81531b5b0db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek topckgen controller provides various clocks to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-topckgen
+          - mediatek,mt7622-topckgen
+          - mediatek,mt8135-topckgen
+          - mediatek,mt8173-topckgen
+          - mediatek,mt8516-topckgen
+      - items:
+          - const: mediatek,mt7623-topckgen
+          - const: mediatek,mt2701-topckgen
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-topckgen
+              - mediatek,mt2712-topckgen
+              - mediatek,mt6765-topckgen
+              - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
+              - mediatek,mt7629-topckgen
+              - mediatek,mt7986-topckgen
+              - mediatek,mt8167-topckgen
+              - mediatek,mt8183-topckgen
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8173-topckgen";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 000000000000..df2bec188706
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,lan966x-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
new file mode 100644
index 000000000000..f1770360798f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
new file mode 100644
index 000000000000..b2ce78722247
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module Binding
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    items:
+      - description: |
+          clock config registers:
+          These registers contain enable, reset & divider tables for the, cpu,
+          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+          for the peripheral clocks.
+      - description: |
+          mss pll dri registers:
+          Block of registers responsible for dynamic reconfiguration of the mss
+          pll
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 000000000000..a9ad7ab5230c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 000000000000..771db2ddf026
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller Binding
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
index ec7ab1483652..1b2181f6d440 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -106,10 +106,3 @@ examples:
         #clock-cells = <1>;
         #reset-cells = <1>;
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA124_CLK_USB2>;
-        resets = <&car TEGRA124_CLK_USB2>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
index f832abb7f11a..bee2dd4b29bf 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -97,10 +97,3 @@ examples:
             power-domains = <&domain>;
         };
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA20_CLK_USB2>;
-        resets = <&car TEGRA20_CLK_USB2>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index fbd758470b88..fe6ca4f68bbe 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm A53 PLL Binding
 
 maintainers:
-  - Sivaprakash Murugesan <sivaprak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description:
   The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
       - qcom,msm8916-a53pll
       - qcom,msm8939-a53pll
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
index 8666e995725f..0e96f693b050 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description:
-  The A7 PLL on the Qualcomm platforms like SDX55 is used to provide high
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
   frequency clock to the CPU.
 
 properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
deleted file mode 100644
index c5eb6694fda9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,camcc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Camera Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-camcc".
-- reg : shall contain base register location and length.
-- #clock-cells : from common clock binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Example:
-	camcc: clock-controller@ad00000 {
-		compatible = "qcom,sdm845-camcc";
-		reg = <0xad00000 0x10000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 000000000000..7a03ef19c947
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller Binding for SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6125.
+
+  See also:
+    dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 000000000000..e706678b353a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM6350.
+
+  See also dt-bindings/clock/qcom,dispcc-sm6350.h.
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 31497677e8de..7a8d375e055e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,18 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
   Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8150 and SM8250.
+  power domains on SM8150/SM8250/SM8350.
 
   See also:
     dt-bindings/clock/qcom,dispcc-sm8150.h
     dt-bindings/clock/qcom,dispcc-sm8250.h
+    dt-bindings/clock/qcom,dispcc-sm8350.h
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - qcom,sc8180x-dispcc
       - qcom,sm8150-dispcc
       - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
 
   clocks:
     items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 8e2eac6cbfb9..6b4efd64c154 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -4,7 +4,10 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8064/MSM8960
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
@@ -20,23 +23,34 @@ description: |
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
+
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
 
   nvmem-cells:
     minItems: 1
     maxItems: 2
+    deprecated: true
     description:
       Qualcomm TSENS (thermal sensor device) on some devices can
       be part of GCC and hence the TSENS properties can also be part
@@ -46,39 +60,39 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
+    deprecated: true
     items:
       - const: calib
       - const: calib_backup
 
   '#thermal-sensor-cells':
     const: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+    deprecated: true
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-  - nvmem-cells
-  - nvmem-cell-names
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
+      compatible = "qcom,gcc-apq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 000000000000..397fb918e032
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on APQ8084.
+
+  See also::
+  - dt-bindings/clock/qcom,gcc-apq8084.h
+  - dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 000000000000..9eb91dd22557
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8064.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    items:
+      - description: PXO source
+      - description: CXO source
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 98572b4a9b60..21470f52ce36 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -24,6 +24,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#power-domain-cells':
+    const: 1
+
   '#reset-cells':
     const: 1
 
@@ -38,6 +41,7 @@ required:
   - compatible
   - reg
   - '#clock-cells'
+  - '#power-domain-cells'
   - '#reset-cells'
 
 additionalProperties: false
@@ -48,6 +52,7 @@ examples:
       compatible = "qcom,gcc-ipq8074";
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
+      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
new file mode 100644
index 000000000000..09b2ea60d356
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks and resets on
+  MSM8660
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8660.h
+  - dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: "qcom,gcc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
new file mode 100644
index 000000000000..2272ea5f78d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8909
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8909.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8909.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8909
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
new file mode 100644
index 000000000000..2ceb1e501ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8916 or MSM8939.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8916.h
+  - dt-bindings/clock/qcom,gcc-msm8939.h
+  - dt-bindings/reset/qcom,gcc-msm8916.h
+  - dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 000000000000..4b7d69518371
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8976.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
index 22e67b238bb6..7b9fef6d9b23 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -32,28 +32,15 @@ properties:
       - const: xo
       - const: sleep
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..dfc5165db9f1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -22,41 +22,40 @@ properties:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 8151c0a05649..544a2335cf05 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -37,32 +37,15 @@ properties:
       - const: core_bi_pll_test_se # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
new file mode 100644
index 000000000000..76988e04c7db
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq4019.h
+  - dt-bindings/clock/qcom,gcc-ipq6018.h
+  - dt-bindings/reset/qcom,gcc-ipq6018.h
+  - dt-bindings/clock/qcom,gcc-msm8953.h
+  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+  - dt-bindings/clock/qcom,gcc-mdm9607.h
+  - dt-bindings/clock/qcom,gcc-mdm9615.h
+  - dt-bindings/reset/qcom,gcc-mdm9615.h
+  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+allOf:
+  - $ref: "qcom,gcc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-ipq4019
+      - qcom,gcc-ipq6018
+      - qcom,gcc-mdm9607
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8953
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+      - qcom,gcc-mdm9615
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8974";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
index 5de9c8263138..aec37e3f5e30 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
@@ -30,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index a404c8fbee67..e4d490e65d14 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -33,32 +33,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
index 5693b8997570..ea61367e5abc 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -44,28 +44,15 @@ properties:
       - const: ufs_phy_tx_symbol_0_clk
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
index f03ef96e57fa..30b5d1215fa8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
@@ -32,32 +32,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 000000000000..b1bf768530a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC8280xp.
+
+  See also:
+  - include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys pipegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SuperSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
index d902f137ab17..e169d46c78f8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
@@ -19,48 +19,67 @@ description: |
 
 properties:
   compatible:
-    const: qcom,gcc-sdm845
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-      - description: PCIE 0 Pipe clock source
-      - description: PCIE 1 Pipe clock source
+    minItems: 3
+    maxItems: 5
 
   clock-names:
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
-      - const: pcie_0_pipe_clk
-      - const: pcie_1_pipe_clk
+    minItems: 3
+    maxItems: 5
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
+  power-domains:
     maxItems: 1
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
 
 examples:
   # Example for GCC for SDM845:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
index b0d1c65aa354..13ffa16e0833 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -35,28 +35,15 @@ properties:
       - const: core_bi_pll_test_se # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
index 16c4cdc7b4d6..8a1419c4d465 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -20,9 +20,6 @@ properties:
   compatible:
     const: qcom,gcc-sdx65
 
-  reg:
-    maxItems: 1
-
   clocks:
     items:
       - description: Board XO source
@@ -43,25 +40,15 @@ properties:
       - const: core_bi_pll_test_se # Optional clock
     minItems: 5
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
index 26050da844d5..bb81a27a1b16 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
@@ -30,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
index ab12b391effc..03e84e15815c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
@@ -30,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
index 20926cd8293e..cbe98c01c085 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
@@ -32,32 +32,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 12766a866625..0333ccb07d8d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -31,32 +31,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index 80bd6caf5bc9..4e2a9cac0a91 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -31,32 +31,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
index 1122700dcc2b..3edbeca70a9c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -54,28 +54,15 @@ properties:
       - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
index 58d98a766de6..102ce6862e24 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
@@ -46,28 +46,15 @@ properties:
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index f66d703bd913..2ed27a2ef445 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -4,57 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains.
-
-  See also:
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
-  - dt-bindings/clock/qcom,gcc-ipq4019.h
-  - dt-bindings/clock/qcom,gcc-ipq6018.h
-  - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/clock/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8953.h
-  - dt-bindings/reset/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
-  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/clock/qcom,gcc-mdm9607.h
-  - dt-bindings/clock/qcom,gcc-mdm9615.h
-  - dt-bindings/reset/qcom,gcc-mdm9615.h
-  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+  Common bindings for Qualcomm global clock control module which supports
+  the clocks, resets and power domains.
 
 properties:
-  compatible:
-    enum:
-      - qcom,gcc-apq8084
-      - qcom,gcc-ipq4019
-      - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
-      - qcom,gcc-mdm9607
-      - qcom,gcc-msm8226
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8939
-      - qcom,gcc-msm8953
-      - qcom,gcc-msm8960
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
-      - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
-
   '#clock-cells':
     const: 1
 
@@ -72,22 +32,11 @@ properties:
       Protected clock specifier list as per common clock binding.
 
 required:
-  - compatible
   - reg
   - '#clock-cells'
   - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+additionalProperties: true
 
-examples:
-  # Example for GCC for MSM8960:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-msm8960";
-      reg = <0x900000 0x4000>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
new file mode 100644
index 000000000000..0a0546c079a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on Qualcomm SoCs.
+
+  See also:
+    dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8350-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8350-gpucc";
+            reg = <0 0x03d90000 0 0x9000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 46dff46d5760..a7d0af1bd9e0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -17,6 +17,8 @@ description: |
     dt-bindings/clock/qcom,gpucc-sdm845.h
     dt-bindings/clock/qcom,gpucc-sc7180.h
     dt-bindings/clock/qcom,gpucc-sc7280.h
+    dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    dt-bindings/clock/qcom,gpucc-sm6350.h
     dt-bindings/clock/qcom,gpucc-sm8150.h
     dt-bindings/clock/qcom,gpucc-sm8250.h
 
@@ -27,6 +29,8 @@ properties:
       - qcom,sc7180-gpucc
       - qcom,sc7280-gpucc
       - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
+      - qcom,sm6350-gpucc
       - qcom,sm8150-gpucc
       - qcom,sm8250-gpucc
 
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 68fdc3d4982a..03faab5b6a41 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Multimedia Clock & Reset Controller Binding
 
 maintainers:
-  - Jeffrey Hugo <jhugo@codeaurora.org>
+  - Jeffrey Hugo <quic_jhugo@quicinc.com>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
@@ -19,6 +19,7 @@ properties:
     enum:
       - qcom,mmcc-apq8064
       - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
       - qcom,mmcc-msm8660
       - qcom,mmcc-msm8960
       - qcom,mmcc-msm8974
@@ -30,30 +31,12 @@ properties:
       - qcom,mmcc-sdm660
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board sleep source
-      - description: Global PLL 0 clock
-      - description: DSI phy instance 0 dsi clock
-      - description: DSI phy instance 0 byte clock
-      - description: DSI phy instance 1 dsi clock
-      - description: DSI phy instance 1 byte clock
-      - description: HDMI phy PLL clock
-      - description: DisplayPort phy PLL vco clock
-      - description: DisplayPort phy PLL link clock
+    minItems: 8
+    maxItems: 10
 
   clock-names:
-    items:
-      - const: xo
-      - const: sleep
-      - const: gpll0
-      - const: dsi0dsi
-      - const: dsi0byte
-      - const: dsi1dsi
-      - const: dsi1byte
-      - const: hdmipll
-      - const: dpvco
-      - const: dplink
+    minItems: 8
+    maxItems: 10
 
   '#clock-cells':
     const: 1
@@ -84,16 +67,179 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,mmcc-msm8998
-
-then:
-  required:
-    - clocks
-    - clock-names
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+            - description: Test clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+            - const: core_bi_pll_test_se
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
 
 examples:
   # Example for MMCC for MSM8960:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
index a20cb10636dd..c4971234fef8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -26,22 +26,18 @@ properties:
 
   clocks:
     items:
-      - description: Primary PLL clock for power cluster (little)
-      - description: Primary PLL clock for perf cluster (big)
-      - description: Alternate PLL clock for power cluster (little)
-      - description: Alternate PLL clock for perf cluster (big)
+      - description: XO source
 
   clock-names:
     items:
-      - const: pwrcl_pll
-      - const: perfcl_pll
-      - const: pwrcl_alt_pll
-      - const: perfcl_alt_pll
+      - const: xo
 
 required:
   - compatible
   - reg
   - '#clock-cells'
+  - clocks
+  - clock-names
 
 additionalProperties: false
 
@@ -51,4 +47,7 @@ examples:
         compatible = "qcom,msm8996-apcc";
         reg = <0x6400000 0x90000>;
         #clock-cells = <1>;
+
+        clocks = <&xo_board>;
+        clock-names = "xo";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 000000000000..973e408c6268
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller Binding for qcm2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on qcm2290.
+
+  See also dt-bindings/clock/qcom,dispcc-qcm2290.h.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
deleted file mode 100644
index da295c3c004b..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Qualcomm RPM Clock Controller Binding
-------------------------------------------------
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-Required properties :
-- compatible : shall contain only one of the following. The generic
-               compatible "qcom,rpmcc" should be also included.
-
-			"qcom,rpmcc-mdm9607", "qcom,rpmcc"
-			"qcom,rpmcc-msm8660", "qcom,rpmcc"
-			"qcom,rpmcc-apq8060", "qcom,rpmcc"
-			"qcom,rpmcc-msm8226", "qcom,rpmcc"
-			"qcom,rpmcc-msm8916", "qcom,rpmcc"
-			"qcom,rpmcc-msm8936", "qcom,rpmcc"
-			"qcom,rpmcc-msm8953", "qcom,rpmcc"
-			"qcom,rpmcc-msm8974", "qcom,rpmcc"
-			"qcom,rpmcc-msm8976", "qcom,rpmcc"
-			"qcom,rpmcc-apq8064", "qcom,rpmcc"
-			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
-			"qcom,rpmcc-msm8992",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8994",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8996", "qcom,rpmcc"
-			"qcom,rpmcc-msm8998", "qcom,rpmcc"
-			"qcom,rpmcc-qcm2290", "qcom,rpmcc"
-			"qcom,rpmcc-qcs404", "qcom,rpmcc"
-			"qcom,rpmcc-sdm660", "qcom,rpmcc"
-			"qcom,rpmcc-sm6115", "qcom,rpmcc"
-			"qcom,rpmcc-sm6125", "qcom,rpmcc"
-
-- #clock-cells : shall contain 1
-
-The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h>
-and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock
-is an "active" clock, which means that the consumer only care that the
-clock is available when the apps CPU subsystem is active, i.e. not
-suspended or in deep idle. If it is important that the clock keeps running
-during system suspend, you need to specify the non-active clock, the one
-not containing *_A_* in the enumerator name.
-
-Example:
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 000000000000..2a95bf8664f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 72212970e6f5..437a34b930e3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -20,12 +20,16 @@ properties:
       - qcom,sc7180-rpmh-clk
       - qcom,sc7280-rpmh-clk
       - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
       - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
       - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
index 47028d7b98e4..633887dc2f8a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -36,13 +36,11 @@ properties:
     items:
       - description: LPASS qdsp6ss register
       - description: LPASS top-cc register
-      - description: LPASS cc register
 
   reg-names:
     items:
       - const: qdsp6ss
       - const: top_cc
-      - const: cc
 
 required:
   - compatible
@@ -59,8 +57,8 @@ examples:
     #include <dt-bindings/clock/qcom,lpass-sc7280.h>
     clock-controller@3000000 {
       compatible = "qcom,sc7280-lpasscc";
-      reg = <0x03000000 0x40>, <0x03c04000 0x4>, <0x03389000 0x24>;
-      reg-names = "qdsp6ss", "top_cc", "cc";
+      reg = <0x03000000 0x40>, <0x03c04000 0x4>;
+      reg-names = "qdsp6ss", "top_cc";
       clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
       clock-names = "iface";
       #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 000000000000..f50e284e5f46
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module which supports the
+  clocks and power domains on SC7280.
+
+  See also:
+  - dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+  - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  reg: true
+
+  compatible:
+    enum:
+      - qcom,sc7280-lpassaoncc
+      - qcom,sc7280-lpassaudiocc
+      - qcom,sc7280-lpasscorecc
+      - qcom,sc7280-lpasshm
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpassaudiocc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: lpass_aon_cc_main_rcg_clk_src
+
+        reg:
+          items:
+            - description: lpass core cc register
+            - description: lpass audio csr register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpassaoncc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active only source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: iface
+
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpasshm
+              - qcom,sc7280-lpasscorecc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+        reg:
+          maxItems: 1
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_audiocc: clock-controller@3300000 {
+      compatible = "qcom,sc7280-lpassaudiocc";
+      reg = <0x3300000 0x30000>,
+            <0x32a9000 0x1000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+      clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+      power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_hm: clock-controller@3c00000 {
+      compatible = "qcom,sc7280-lpasshm";
+      reg = <0x3c00000 0x28>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpasscore: clock-controller@3900000 {
+      compatible = "qcom,sc7280-lpasscorecc";
+      reg = <0x3900000 0x50000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_aon: clock-controller@3380000 {
+      compatible = "qcom,sc7280-lpassaoncc";
+      reg = <0x3380000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+               <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 000000000000..d4239ccae917
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SDM845.
+
+  See also dt-bindings/clock/qcom,camcc-sm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 000000000000..6660ff16ad1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6115.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
new file mode 100644
index 000000000000..3c573e1a1257
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM6375
+
+  See also:
+  - dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
new file mode 100644
index 000000000000..268f4c6ae0ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SM8450
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+  Qualcomm camera clock control module which supports the clocks, resets and
+  power domains on SM8450.
+
+  See also include/dt-bindings/clock/qcom,sm8450-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8450-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm8450-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
new file mode 100644
index 000000000000..1cc2457f8208
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM8450.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index f7d48f23da44..10119d9ef4b1 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -44,6 +44,7 @@ Required properties:
 	* "fsl,ls1046a-clockgen"
 	* "fsl,ls1088a-clockgen"
 	* "fsl,ls2080a-clockgen"
+	* "fsl,lx2160a-clockgen"
 	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
new file mode 100644
index 000000000000..102eb95cb3fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
index c55a7c494e01..2197c952e21d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
@@ -51,6 +51,18 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
     sdhi2_clk: sdhi2_clk@e615007c {
             compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
             reg = <0xe615007c 4>;
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index 9b414fbde6d7..e57bc40d307a 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -48,6 +48,8 @@ properties:
       - renesas,r8a77990-cpg-mssr # R-Car E3
       - renesas,r8a77995-cpg-mssr # R-Car D3
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
deleted file mode 100644
index 399e0da22348..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Renesas H8/300 divider clock
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8300-div-clock"
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - reg: Base address and length of the divide rate selector
-
-  - renesas,width: bit width of selector
-
-Example
--------
-
-		cclk: cclk {
-			compatible = "renesas,h8300-div-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee01b 2>;
-			renesas,width = <2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
deleted file mode 100644
index 500cdadbceb7..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Renesas H8S2678 PLL clock
-
-This device is Clock multiplyer
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8s2678-pll-clock"
-
-  - clocks: Reference to the parent clocks
-
-  - #clock-cells: Must be 0
-
-  - reg: Two rate selector (Multiply / Divide) register address
-
-Example
--------
-
-		pllclk: pllclk {
-			compatible = "renesas,h8s2678-pll-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee03b 2>, <0xfee045 2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 25dbb0fac065..95bf485c6cec 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -39,6 +39,17 @@ properties:
   '#power-domain-cells':
     const: 0
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: "../dma/renesas,rzn1-dmamux.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
index 6eaabb4d82ec..81f09df7147e 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -47,7 +47,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 4
     maxItems: 4
 
   clock-names:
@@ -64,7 +63,6 @@ properties:
     maxItems: 1
 
   resets:
-    minItems: 2
     maxItems: 2
 
   reset-names:
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 30b2e3d0d25d..487f74cdc749 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -4,14 +4,15 @@
 $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description: |
-  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
-  Standby Mode share the same register block.
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
 
   They provide the following functionalities:
     - The CPG block generates various core clocks,
@@ -22,7 +23,11 @@ description: |
 
 properties:
   compatible:
-    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+    enum:
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a09g011-cpg # RZ/V2M
 
   reg:
     maxItems: 1
@@ -40,9 +45,9 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a07g044-cpg.h>
+        <dt-bindings/clock/r9a0*-cpg.h>,
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -56,7 +61,7 @@ properties:
   '#reset-cells':
     description:
       The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g044-cpg.h>.
+      <dt-bindings/clock/r9a0*-cpg.h>.
     const: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
new file mode 100644
index 000000000000..8d4eb4475fc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock Device Tree Bindings
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cddec8c..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-          in clock-names
-- clock-names: Should contain the following:
-  - "xin24m" for both PMUCRU and CRU
-  - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	pmucru: clock-controller@ff2bc000 {
-		compatible = "rockchip,px30-pmucru";
-		reg = <0x0 0xff2bc000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff2b0000 {
-		compatible = "rockchip,px30-cru";
-		reg = <0x0 0xff2b0000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff030000 {
-		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff030000 0x0 0x100>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 000000000000..0f0f64b6f8cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
deleted file mode 100644
index 20df350b9ef3..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Rockchip RK3036 Clock and Reset Unit
-
-The RK3036 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3036-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "rmii_clkin" - external EMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3036-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@20060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20060000 0x100>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 000000000000..ba5b45464315
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
deleted file mode 100644
index 6f8744fd301b..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 000000000000..b3d9c8eca989
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
deleted file mode 100644
index 7f368530a2e4..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3188/RK3066 Clock and Reset Unit
-
-The RK3188/RK3066 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
-			"rockchip,rk3066a-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
-dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
-Similar macros exist for the reset sources in these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "xin27m" - 27mhz crystal input on rk3066 - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_cif0" - external camera clock - optional,
- - "ext_rmii" - external RMII clock - optional,
- - "ext_jtag" - externalJTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 000000000000..ddd7e46af0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
deleted file mode 100644
index f323048127eb..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3228 Clock and Reset Unit
-
-The RK3228 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3228-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional
- - "phy_50m_out" - output clock of the pll in the mac phy
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3228-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10110000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10110000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 000000000000..1050fff72ade
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19241..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000000..6655e97d52e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
deleted file mode 100644
index 9b151c5b0c90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Rockchip RK3308 Clock and Reset Unit
-
-The RK3308 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: CRU should be "rockchip,rk3308-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
-   "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
-   "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
- - "mac_clkin" - external MAC clock - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff500000 {
-		compatible = "rockchip,rk3308-cru";
-		reg = <0x0 0xff500000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff0a0000 {
-		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff0a0000 0x0 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 000000000000..fec37f5b80f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
deleted file mode 100644
index 7c8bbcfed8d2..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3368 Clock and Reset Unit
-
-The RK3368 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3368-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
- - "ext_vip" - external VIP clock - optional,
- - "usbotg_out" - output clock of the pll in the otg phy
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3368-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 000000000000..90af242b41c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
index 72b286a1beba..0b758e015ee3 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Rockchip RK3399 Clock and Reset Unit
 
 maintainers:
-  - Xing Zheng <zhengxing@rock-chips.com>
+  - Elaine Zhang <zhangqing@rock-chips.com>
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |
@@ -22,11 +22,11 @@ description: |
   There are several clocks that are generated outside the SoC. It is expected
   that they are defined using standard clock bindings with following
   clock-output-names:
-    - "xin24m" - crystal input - required,
-    - "xin32k" - rtc clock - optional,
-    - "clkin_gmac" - external GMAC clock - optional,
-    - "clkin_i2s" - external I2S clock - optional,
-    - "pclkin_cif" - external ISP clock - optional,
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
     - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
     - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
 
@@ -46,24 +46,15 @@ properties:
     const: 1
 
   clocks:
-    minItems: 1
-
-  assigned-clocks:
-    minItems: 1
-    maxItems: 64
-
-  assigned-clock-parents:
-    minItems: 1
-    maxItems: 64
+    maxItems: 1
 
-  assigned-clock-rates:
-    minItems: 1
-    maxItems: 64
+  clock-names:
+    const: xin24m
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: >
-      phandle to the syscon managing the "general register files". It is used
+    description:
+      Phandle to the syscon managing the "general register files". It is used
       for GRF muxes, if missing any muxes present in the GRF will not be
       available.
 
@@ -77,7 +68,7 @@ additionalProperties: false
 
 examples:
   - |
-    pmucru: pmu-clock-controller@ff750000 {
+    pmucru: clock-controller@ff750000 {
       compatible = "rockchip,rk3399-pmucru";
       reg = <0xff750000 0x1000>;
       #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
index b2c26097827f..fc7546f521c5 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
@@ -34,6 +34,19 @@ properties:
   "#reset-cells":
     const: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
deleted file mode 100644
index 161326a4f9c1..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Rockchip RV1108 Clock and Reset Unit
-
-The RV1108 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rv1108-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_vip" - external VIP clock - optional
- - "ext_i2s" - external I2S clock - optional
- - "ext_gmac" - external GMAC clock - optional
- - "hdmiphy" - external clock input derived from HDMI PHY - optional
- - "usbphy" - external clock input derived from USB PHY - optional
-
-Example: Clock controller node:
-
-	cru: cru@20200000 {
-		compatible = "rockchip,rv1108-cru";
-		reg = <0x20200000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10230000 {
-		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
-		reg = <0x10230000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 000000000000..4611d920b8df
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
new file mode 100644
index 000000000000..0998f8b922bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
index f14f1d39da36..d819dfaafff9 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC Audio SubSystem clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 4e8062860986..0589a63e273a 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
index 64d027dbe3b2..c98eff64f2b5 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung SoC external/osc/XXTI/XusbXTI clock
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
index 1ed64add4355..bee13436d1ea 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos4412 SoC ISP clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
@@ -61,4 +61,3 @@ examples:
         clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
         clock-names = "aclk200", "aclk400_mcuisp";
     };
-
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 000000000000..b05f83533e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 000000000000..b737c9d35a1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 000000000000..3f9326e09f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 000000000000..c137c6744ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 000000000000..006d33a9e0f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
index 7f8c91a29b91..141cf173f87d 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -9,7 +9,7 @@ title: Samsung Exynos850 SoC clock controller
 maintainers:
   - Sam Protsenko <semen.protsenko@linaro.org>
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
@@ -32,9 +32,14 @@ properties:
   compatible:
     enum:
       - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-aud
+      - samsung,exynos850-cmu-cmgp
       - samsung,exynos850-cmu-core
       - samsung,exynos850-cmu-dpu
       - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-is
+      - samsung,exynos850-cmu-mfcmscl
       - samsung,exynos850-cmu-peri
 
   clocks:
@@ -72,6 +77,60 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-aud
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: AUD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_aud
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-core
 
     then:
@@ -138,6 +197,54 @@ allOf:
       properties:
         compatible:
           contains:
+            const: samsung,exynos850-cmu-is
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_IS bus clock (from CMU_TOP)
+            - description: Image Texture Processing core clock (from CMU_TOP)
+            - description: Visual Recognition Accelerator clock (from CMU_TOP)
+            - description: Geometric Distortion Correction clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_is_bus
+            - const: dout_is_itp
+            - const: dout_is_vra
+            - const: dout_is_gdc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-mfcmscl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Multi-Format Codec clock (from CMU_TOP)
+            - description: Memory to Memory Scaler clock (from CMU_TOP)
+            - description: Multi-Channel Scaler clock (from CMU_TOP)
+            - description: JPEG codec clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_mfcmscl_mfc
+            - const: dout_mfcmscl_m2m
+            - const: dout_mfcmscl_mcsc
+            - const: dout_mfcmscl_jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
             const: samsung,exynos850-cmu-peri
 
     then:
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 000000000000..2ab4642679c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-fsys0
+      - samsung,exynosautov9-cmu-fsys1
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 bus clock (from CMU_TOP)
+            - description: CMU_FSYS0 pcie clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys0_bus
+            - const: dout_clkcmu_fsys0_pcie
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 bus clock (from CMU_TOP)
+            - description: CMU_FSYS1 mmc card clock (from CMU_TOP)
+            - description: CMU_FSYS1 usb clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys1_bus
+            - const: dout_clkcmu_fsys1_mmc_card
+            - const: dout_clkcmu_fsys1_usbdrd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
index 1410c51e0e7d..d5296e6053a1 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2M and S5M family clock generator block
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
@@ -34,7 +34,6 @@ properties:
     const: 1
 
   clock-output-names:
-    minItems: 3
     maxItems: 3
     description: Names for AP, CP and BT clocks.
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
index ae8f8fc93233..2659854ea1c0 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung S5Pv210 SoC Audio SubSystem clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
deleted file mode 100644
index a86c83bf9d4e..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
-
-Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
-controller, which generates and supplies clock to various controllers
-within the SoC.
-
-Required Properties:
-
-- compatible: should be one of following:
-	- "samsung,s5pv210-clock" : for clock controller of Samsung
-	  S5PC110/S5PV210 SoCs,
-	- "samsung,s5p6442-clock" : for clock controller of Samsung
-	  S5P6442 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
-the SoC,
- - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
-pins of the SoC,
-
-A subset of above clocks available on given board shall be specified in
-board device tree, including the system base clock, as selected by XOM[0]
-pin of the SoC. Refer to generic fixed rate clock bindings
-documentation[1] for more information how to specify these clocks.
-
-[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s5pv210-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	xxti: clock-xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	uart0: serial@e2900000 {
-		compatible = "samsung,s5pv210-uart";
-		reg = <0xe2900000 0x400>;
-		interrupt-parent = <&vic1>;
-		interrupts = <10>;
-		clock-names = "uart", "clk_uart_baud0",
-				"clk_uart_baud1";
-		clocks = <&clocks UART0>, <&clocks UART0>,
-				<&clocks SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 000000000000..67a33665cf00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index 47e1ab08c95d..785a12797a42 100644
--- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -5,7 +5,7 @@
 $id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: SC9863A Clock Control Unit Device Tree Bindings
+title: SC9863A Clock Control Unit
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 000000000000..5f747b0471cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index a0ae4867ed27..242fe922b035 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -41,6 +41,7 @@ description: |
 
   The list of valid indices for STM32MP1 is available in:
   include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset-controller/stm32mp13-resets.h
 
   This file implements defines like:
   #define LTDC_R	3072
@@ -57,7 +58,10 @@ properties:
       - enum:
           - st,stm32mp1-rcc-secure
           - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
       - const: syscon
+  clocks: true
+  clock-names: true
 
   reg:
     maxItems: 1
@@ -68,14 +72,54 @@ required:
   - compatible
   - reg
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp13-rcc
+then:
+  properties:
+    clocks:
+      description: Specifies oscillators.
+      maxItems: 5
+
+    clock-names:
+      items:
+        - const: hse
+        - const: hsi
+        - const: csi
+        - const: lse
+        - const: lsi
+  required:
+    - clocks
+    - clock-names
+else:
+  properties:
+    clocks:
+      description:
+        Specifies the external RX clock for ethernet MAC.
+      maxItems: 1
+
+    clock-names:
+      const: ETH_RX_CLK/ETH_REF_CLK
+
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
     rcc: rcc@50000000 {
         compatible = "st,stm32mp1-rcc-secure", "syscon";
         reg = <0x50000000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+        clock-names = "hse", "hsi", "csi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_CSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 55a18939bddd..c918075405ba 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -78,7 +78,7 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
 
-- clocks : must be set to the parent's phandle. it's could be output clocks of
+- clocks : must be set to the parent's phandle. it could be output clocks of
   a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
 
 - clock-output-names : List of strings used to name the clock outputs.
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 000000000000..8f49a1ae03f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
index 9bc95a308477..2150307219a0 100644
--- a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -109,6 +109,25 @@ properties:
 
     additionalProperties: false
 
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -119,3 +138,41 @@ required:
   - smp-twd-clock
 
 additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 000000000000..bcc14088220a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 000000000000..dc808e2f8327
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various inteernal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 9b537bc876b5..66765116aff5 100644
--- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -15,6 +15,7 @@ properties:
       - enum:
           - ti,am654-ehrpwm-tbclk
           - ti,am64-epwm-tbclk
+          - ti,am62-epwm-tbclk
       - const: syscon
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
index 18af6b9409e3..d20db7974a38 100644
--- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
+++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
@@ -21,6 +21,7 @@ Required properties :
 	       "ti,clkctrl-l4-per"
 	       "ti,clkctrl-l4-secure"
 	       "ti,clkctrl-l4-wkup"
+- clock-output-names : from common clock binding
 - #clock-cells : shall contain 2 with the first entry being the instance
 		 offset from the clock domain base and the second being the
 		 clock index
@@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430:
 	l4per: cm@1400 {
 		cm_l4per@0 {
 			cm_l4per_clkctrl: clock@20 {
-				compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+				compatible = "ti,clkctrl";
+				clock-output-names = "l4_per";
 				reg = <0x20 0x1b0>;
 				#clock-cells = <2>;
 			};
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index cb76b3f2b341..9c6199249ce5 100644
--- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -17,6 +17,9 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of clocks within this domain
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
index 5f43c4706b09..33ac7c9ad053 100644
--- a/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -27,6 +27,9 @@ Required properties:
 - clocks : link phandles of component clocks
 - #clock-cells : from common clock binding; shall be set to 0.
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 
 usb_l4_gate_ick: usb_l4_gate_ick {
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
index 36998e184821..c9894538315b 100644
--- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -15,7 +15,7 @@ Required properties:
 	- for "ti,da850-pll1", shall be "clksrc"
 
 Optional properties:
-- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
 	wave input on the OSCIN pin instead of using a crystal oscillator.
 	This property is only valid when compatible = "ti,da850-pll0".
 
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
index 21c002d28b9b..68504079f99f 100644
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -6,7 +6,7 @@ functional clock but can be configured to provide different clocks.
 ATL can maintain a clock averages to some desired frequency based on the bws/aws
 signals - can compensate the drift between the two ws signal.
 
-In order to provide the support for ATL and it's output clocks (which can be used
+In order to provide the support for ATL and its output clocks (which can be used
 internally within the SoC or external components) two sets of bindings is needed:
 
 Clock tree binding:
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
index 662b36d53bf0..518e3c142276 100644
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -16,6 +16,7 @@ Required properties:
 - clocks: parent clock.
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
   see [2]
 - reg: offset for the autoidle register of this clock, see [2]
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 56d603c1f716..4982615c01b9 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:
@@ -36,6 +36,7 @@ Required properties:
 	ti,clkdm-gate-clock type
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : bit shift for programming the clock gate, invalid for
 		 ti,clkdm-gate-clock type
 - ti,set-bit-to-disable : inverts default gate programming. Setting the bit
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3f4704040140..d3eb5ca92a7f 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 
 Required properties:
 - compatible : shall be one of:
@@ -28,6 +28,7 @@ Required properties:
 - reg : base address for the control register
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
 
 Examples:
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
index eec8994b9be8..e17425a58621 100644
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -42,6 +42,7 @@ Required properties:
 - reg : register offset for register controlling adjustable mux
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : number of bits to shift the bit-mask, defaults to
   0 if not present
 - ti,index-starts-at-one : valid input select programming starts at 1, not
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 000000000000..c56f911fff47
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 000000000000..d36558aa39f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 000000000000..081f85b1eb88
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
new file mode 100644
index 000000000000..634b7b964606
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659fa610..ae515651fc6b 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -104,8 +104,7 @@ properties:
       - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
         Type-C Cable and Connector specification, when Power Delivery is not
         supported.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - default
       - 1.5A
@@ -264,11 +263,11 @@ examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
   - |
     muic-max77843 {
-      usb_con1: connector {
-        compatible = "usb-b-connector";
-        label = "micro-USB";
-        type = "micro";
-      };
+        usb_con1: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
     };
 
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
@@ -276,34 +275,34 @@ examples:
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
   - |
     ccic: s2mm005 {
-      usb_con2: connector {
-        compatible = "usb-c-connector";
-        label = "USB-C";
+        usb_con2: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
-            usb_con_hs: endpoint {
-              remote-endpoint = <&max77865_usbc_hs>;
-            };
-          };
-          port@1 {
-            reg = <1>;
-            usb_con_ss: endpoint {
-              remote-endpoint = <&usbdrd_phy_ss>;
-            };
-          };
-          port@2 {
-            reg = <2>;
-            usb_con_sbu: endpoint {
-              remote-endpoint = <&dp_aux>;
+                port@0 {
+                    reg = <0>;
+                    usb_con_hs: endpoint {
+                        remote-endpoint = <&max77865_usbc_hs>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&usbdrd_phy_ss>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&dp_aux>;
+                    };
+                };
             };
-          };
         };
-      };
     };
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
@@ -311,16 +310,16 @@ examples:
   - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
-      usb_con3: connector {
-        compatible = "usb-c-connector";
-        label = "USB-C";
-        power-role = "dual";
-        try-power-role = "sink";
-        source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-        sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-                     PDO_VAR(5000, 12000, 2000)>;
-        op-sink-microwatt = <10000000>;
-      };
+        usb_con3: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                         PDO_VAR(5000, 12000, 2000)>;
+            op-sink-microwatt = <10000000>;
+        };
     };
 
   # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
@@ -333,20 +332,20 @@ examples:
         data-role = "dual";
 
         ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                port@0 {
-                        reg = <0>;
-                        hs_ep: endpoint {
-                                remote-endpoint = <&usb3_hs_ep>;
-                        };
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                hs_ep: endpoint {
+                    remote-endpoint = <&usb3_hs_ep>;
                 };
-                port@1 {
-                        reg = <1>;
-                        ss_ep: endpoint {
-                                remote-endpoint = <&hd3ss3220_in_ep>;
-                        };
+            };
+            port@1 {
+                reg = <1>;
+                ss_ep: endpoint {
+                    remote-endpoint = <&hd3ss3220_in_ep>;
                 };
+            };
         };
     };
 
@@ -355,12 +354,12 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     usb {
-      connector {
-        compatible = "gpio-usb-b-connector", "usb-b-connector";
-        type = "micro";
-        id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
-        vbus-supply = <&usb_p0_vbus>;
-      };
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
     };
 
   # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
@@ -368,27 +367,27 @@ examples:
   # mobile phone
   - |
     muic-max77843 {
-      usb_con4: connector {
-        compatible = "samsung,usb-connector-11pin", "usb-b-connector";
-        label = "micro-USB";
-        type = "micro";
+        usb_con4: connector {
+            compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
-            muic_to_usb: endpoint {
-              remote-endpoint = <&usb_to_muic>;
-            };
-          };
-          port@3 {
-            reg = <3>;
-            usb_con_mhl: endpoint {
-              remote-endpoint = <&sii8620_mhl>;
+                port@0 {
+                    reg = <0>;
+                    muic_to_usb: endpoint {
+                        remote-endpoint = <&usb_to_muic>;
+                    };
+                };
+                port@3 {
+                    reg = <3>;
+                    usb_con_mhl: endpoint {
+                        remote-endpoint = <&sii8620_mhl>;
+                    };
+                };
             };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000000..4e0b2d2b303e
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
index 52bce5dbb11f..fa4d4142ac93 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.yaml
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -1,25 +1,30 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/idle-states.yaml#
+$id: http://devicetree.org/schemas/cpu/idle-states.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM idle states binding description
+title: Idle states binding description
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+  - Anup Patel <anup@brainfault.org>
 
 description: |+
   ==========================================
   1 - Introduction
   ==========================================
 
-  ARM systems contain HW capable of managing power consumption dynamically,
-  where cores can be put in different low-power states (ranging from simple wfi
-  to power gating) according to OS PM policies. The CPU states representing the
-  range of dynamic idle states that a processor can enter at run-time, can be
-  specified through device tree bindings representing the parameters required to
-  enter/exit specific idle states on a given processor.
+  ARM and RISC-V systems contain HW capable of managing power consumption
+  dynamically, where cores can be put in different low-power states (ranging
+  from simple wfi to power gating) according to OS PM policies. The CPU states
+  representing the range of dynamic idle states that a processor can enter at
+  run-time, can be specified through device tree bindings representing the
+  parameters required to enter/exit specific idle states on a given processor.
+
+  ==========================================
+  2 - ARM idle states
+  ==========================================
 
   According to the Server Base System Architecture document (SBSA, [3]), the
   power states an ARM CPU can be put into are identified by the following list:
@@ -43,8 +48,23 @@ description: |+
   The device tree binding definition for ARM idle states is the subject of this
   document.
 
+  ==========================================
+  3 - RISC-V idle states
+  ==========================================
+
+  On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific
+  suspend (or idle) states (ranging from simple WFI, power gating, etc). The
+  RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a
+  standard mechanism for OS to request HART state transitions.
+
+  The platform specific suspend (or idle) states of a hart can be either
+  retentive or non-rententive in nature. A retentive suspend state will
+  preserve HART registers and CSR values for all privilege modes whereas
+  a non-retentive suspend state will not preserve HART registers and CSR
+  values.
+
   ===========================================
-  2 - idle-states definitions
+  4 - idle-states definitions
   ===========================================
 
   Idle states are characterized for a specific system through a set of
@@ -211,10 +231,10 @@ description: |+
   properties specification that is the subject of the following sections.
 
   ===========================================
-  3 - idle-states node
+  5 - idle-states node
   ===========================================
 
-  ARM processor idle states are defined within the idle-states node, which is
+  The processor idle states are defined within the idle-states node, which is
   a direct child of the cpus node [1] and provides a container where the
   processor idle states, defined as device tree nodes, are listed.
 
@@ -223,7 +243,7 @@ description: |+
   just supports idle_standby, an idle-states node is not required.
 
   ===========================================
-  4 - References
+  6 - References
   ===========================================
 
   [1] ARM Linux Kernel documentation - CPUs bindings
@@ -238,9 +258,15 @@ description: |+
   [4] ARM Architecture Reference Manuals
       http://infocenter.arm.com/help/index.jsp
 
-  [6] ARM Linux Kernel documentation - Booting AArch64 Linux
+  [5] ARM Linux Kernel documentation - Booting AArch64 Linux
       Documentation/arm64/booting.rst
 
+  [6] RISC-V Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/riscv/cpus.yaml
+
+  [7] RISC-V Supervisor Binary Interface (SBI)
+      http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
+
 properties:
   $nodename:
     const: idle-states
@@ -253,7 +279,7 @@ properties:
       On ARM 32-bit systems this property is optional
 
       This assumes that the "enable-method" property is set to "psci" in the cpu
-      node[6] that is responsible for setting up CPU idle management in the OS
+      node[5] that is responsible for setting up CPU idle management in the OS
       implementation.
     const: psci
 
@@ -265,8 +291,8 @@ patternProperties:
       as follows.
 
       The idle state entered by executing the wfi instruction (idle_standby
-      SBSA,[3][4]) is considered standard on all ARM platforms and therefore
-      must not be listed.
+      SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and
+      therefore must not be listed.
 
       In addition to the properties listed above, a state node may require
       additional properties specific to the entry-method defined in the
@@ -275,7 +301,27 @@ patternProperties:
 
     properties:
       compatible:
-        const: arm,idle-state
+        enum:
+          - arm,idle-state
+          - riscv,idle-state
+
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
+      riscv,sbi-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          suspend_type parameter to pass to the RISC-V SBI HSM suspend call.
+
+          This property is required in idle state nodes of device tree meant
+          for RISC-V systems. For more details on the suspend_type parameter
+          refer the SBI specifiation v0.3 (or higher) [7].
 
       local-timer-stop:
         description:
@@ -317,6 +363,8 @@ patternProperties:
         description:
           A string used as a descriptive name for the idle state.
 
+    additionalProperties: false
+
     required:
       - compatible
       - entry-latency-us
@@ -337,8 +385,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x0>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@1 {
@@ -346,8 +394,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x1>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@100 {
@@ -355,8 +403,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@101 {
@@ -364,8 +412,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10000 {
@@ -373,8 +421,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10000>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10001 {
@@ -382,8 +430,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10001>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10100 {
@@ -391,8 +439,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@10101 {
@@ -400,8 +448,8 @@ examples:
             compatible = "arm,cortex-a57";
             reg = <0x0 0x10101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
         };
 
         cpu@100000000 {
@@ -409,8 +457,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x0>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100000001 {
@@ -418,8 +466,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x1>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100000100 {
@@ -427,8 +475,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100000101 {
@@ -436,8 +484,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010000 {
@@ -445,8 +493,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10000>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010001 {
@@ -454,8 +502,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10001>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010100 {
@@ -463,8 +511,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10100>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         cpu@100010101 {
@@ -472,8 +520,8 @@ examples:
             compatible = "arm,cortex-a53";
             reg = <0x1 0x10101>;
             enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
         };
 
         idle-states {
@@ -567,56 +615,56 @@ examples:
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x0>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@1 {
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x1>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@2 {
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x2>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@3 {
             device_type = "cpu";
             compatible = "arm,cortex-a15";
             reg = <0x3>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
         };
 
         cpu@100 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x100>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         cpu@101 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x101>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         cpu@102 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x102>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         cpu@103 {
             device_type = "cpu";
             compatible = "arm,cortex-a7";
             reg = <0x103>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
         };
 
         idle-states {
@@ -658,4 +706,150 @@ examples:
         };
     };
 
+  - |
+    // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x0>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc0: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x1>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc1: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@10 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x10>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc10: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@11 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x11>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc11: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        idle-states {
+            CPU_RET_0_0: cpu-retentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_0_0: cpu-nonretentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_0: cluster-retentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000000>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_0: cluster-nonretentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000000>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RET_1_0: cpu-retentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000010>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_1_0: cpu-nonretentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000010>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_1: cluster-retentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000010>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_1: cluster-nonretentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000010>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+        };
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index 73470ecd1f12..ce91a9197697 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
 firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
 Adaptive Voltage Scaling.
 
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
 
 
 Node brcm,avs-cpu-data-mem
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index b8233ec91d3d..e0a4ba599abc 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -20,6 +20,13 @@ Optional properties:
 	       Vsram to fit SoC specific needs. When absent, the voltage scaling
 	       flow is handled by hardware, hence no software "voltage tracking" is
 	       needed.
+- mediatek,cci:
+	Used to confirm the link status between cpufreq and mediatek cci. Because
+	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
+	To prevent the issue of high frequency and low voltage, we need to use this
+	property to make sure mediatek cci is ready.
+	For details of mediatek cci, please refer to
+	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
 - #cooling-cells:
 	For details, please refer to
 	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
deleted file mode 100644
index 9299028ee712..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
-	Usage:		required
-	Value type:	<string>
-	Definition:	must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
-
-- clocks
-	Usage:		required
-	Value type:	<phandle> From common clock binding.
-	Definition:	clock handle for XO clock and GPLL0 clock.
-
-- clock-names
-	Usage:		required
-	Value type:	<string> From common clock binding.
-	Definition:	must be "xo", "alternate".
-
-- reg
-	Usage:		required
-	Value type:	<prop-encoded-array>
-	Definition:	Addresses and sizes for the memory of the HW bases in
-			each frequency domain.
-- reg-names
-	Usage:		Optional
-	Value type:	<string>
-	Definition:	Frequency domain name i.e.
-			"freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
-	Usage:		required.
-	Definition:	Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-				      compatible = "cache";
-				};
-			};
-		};
-
-		CPU1: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu@200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x200>;
-			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu@300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x300>;
-			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu@400 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x400>;
-			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_400: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU5: cpu@500 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x500>;
-			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_500: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU6: cpu@600 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x600>;
-			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU7: cpu@700 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x700>;
-			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-	};
-
- soc {
-	cpufreq_hw: cpufreq@17d43000 {
-		compatible = "qcom,cpufreq-hw";
-		reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
-		reg-names = "freq-domain0", "freq-domain1";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-		clock-names = "xo", "alternate";
-
-		#freq-domain-cells = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 000000000000..24fa3d87a40b
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,sm6375-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 2
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  '#freq-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
new file mode 100644
index 000000000000..a11e1b867379
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq bindings
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq8064
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
+          - qcom,qcs404
+  required:
+    - compatible
+
+properties:
+  cpus:
+    type: object
+
+    patternProperties:
+      'cpu@[0-9a-f]+':
+        type: object
+
+        properties:
+          power-domains:
+            maxItems: 1
+
+          power-domain-names:
+            items:
+              - const: cpr
+
+        required:
+          - power-domains
+          - power-domain-names
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2-kryo-cpu
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+        compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index dedc99e34ebc..0401c11da8d9 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security System Device Tree Bindings
+title: Allwinner A10 Security System
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 00648f9d9278..026a9f9e1aeb 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -82,4 +82,3 @@ examples:
       clock-names = "bus", "mod";
       resets = <&ccu RST_BUS_CE>;
     };
-
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
new file mode 100644
index 000000000000..a772d232de09
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED HACE hash and crypto Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |
+  The Hash and Crypto Engine (HACE) is designed to accelerate the throughput
+  of hash data digest, encryption, and decryption. Basically, HACE can be
+  divided into two independently engines - Hash Engine and Crypto Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-hace
+      - aspeed,ast2600-hace
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    hace: crypto@1e6d0000 {
+        compatible = "aspeed,ast2600-hace";
+        reg = <0x1e6d0000 0x200>;
+        interrupts = <4>;
+        clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+        resets = <&syscon ASPEED_RESET_HACE>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
new file mode 100644
index 000000000000..0ccaab16dc61
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: aes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    aes: crypto@e1810000 {
+      compatible = "atmel,at91sam9g46-aes";
+      reg = <0xe1810000 0x100>;
+      interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+      clock-names = "aes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+             <&dma0 AT91_XDMAC_DT_PERID(2)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
new file mode 100644
index 000000000000..5163c51b4547
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-sha
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sha_clk
+
+  dmas:
+    maxItems: 1
+    description: TX DMA Channel
+
+  dma-names:
+    const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    sha: crypto@e1814000 {
+      compatible = "atmel,at91sam9g46-sha";
+      reg = <0xe1814000 0x100>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+      clock-names = "sha_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
new file mode 100644
index 000000000000..fcc5adf03cad
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-tdes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tdes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    tdes: crypto@e2014000 {
+      compatible = "atmel,at91sam9g46-tdes";
+      reg = <0xe2014000 0x100>;
+      interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+      clock-names = "tdes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+             <&dma0 AT91_XDMAC_DT_PERID(53)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
deleted file mode 100644
index f2aab3dc2b52..000000000000
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Atmel HW cryptographic accelerators
-
-These are the HW cryptographic accelerators found on some Atmel products.
-
-* Advanced Encryption Standard (AES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-aes".
-- reg: Should contain AES registers location and length.
-- interrupts: Should contain the IRQ line for the AES.
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-aes@f8038000 {
-	compatible = "atmel,at91sam9g46-aes";
-	reg = <0xf8038000 0x100>;
-	interrupts = <43 4 0>;
-	dmas = <&dma1 2 18>,
-	       <&dma1 2 19>;
-	dma-names = "tx", "rx";
-
-* Triple Data Encryption Standard (Triple DES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-tdes".
-- reg: Should contain TDES registers location and length.
-- interrupts: Should contain the IRQ line for the TDES.
-
-Optional properties:
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-tdes@f803c000 {
-	compatible = "atmel,at91sam9g46-tdes";
-	reg = <0xf803c000 0x100>;
-	interrupts = <44 4 0>;
-	dmas = <&dma1 2 20>,
-	       <&dma1 2 21>;
-	dma-names = "tx", "rx";
-};
-
-* Secure Hash Algorithm (SHA)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-sha".
-- reg: Should contain SHA registers location and length.
-- interrupts: Should contain the IRQ line for the SHA.
-
-Optional properties:
-- dmas: One DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property. Only one "tx" string needed.
-
-Example:
-sha@f8034000 {
-	compatible = "atmel,at91sam9g46-sha";
-	reg = <0xf8034000 0x100>;
-	interrupts = <42 4 0>;
-	dmas = <&dma1 2 17>;
-	dma-names = "tx";
-};
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
index 9c53c27bd20a..e0fe63957888 100644
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -22,19 +22,28 @@ properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the NPE this crypto engine
+          - description: the NPE instance number
     description: phandle to the NPE this crypto engine is using, the cell
       describing the NPE instance to be used.
 
   queue-rx:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
     description: phandle to the RX queue on the NPE, the cell describing
       the queue instance to be used.
 
   queue-txready:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX READY queue on the NPE
+          - description: the queue instance number
     description: phandle to the TX READY queue on the NPE, the cell describing
       the queue instance to be used.
 
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
index ee2c099981b2..fedd8be56ad6 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS AES Device Tree Bindings
+title: Intel Keem Bay OCS AES
 
 maintainers:
   - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
index a3c16451b1ad..2bb95247b64f 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS ECC Device Tree Bindings
+title: Intel Keem Bay OCS ECC
 
 maintainers:
   - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
index acb92706d280..46e2853ab8f4 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS HCU Device Tree Bindings
+title: Intel Keem Bay OCS HCU
 
 maintainers:
   - Declan Murphy <declan.murphy@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
deleted file mode 100644
index 7ee0e9eac973..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm MSM pseudo random number generator.
-
-Required properties:
-
-- compatible  : should be "qcom,prng" for 8916 etc
-              : should be "qcom,prng-ee" for 8996 and later using EE
-		(Execution Environment) slice of prng
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
-
-Example:
-
-	rng@f9bff000 {
-		compatible = "qcom,prng";
-		reg = <0xf9bff000 0x200>;
-		clocks = <&clock GCC_PRNG_AHB_CLK>;
-		clock-names = "core";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
new file mode 100644
index 000000000000..bb42f4588b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Pseudo Random Number Generator
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,prng  # 8916 etc.
+      - qcom,prng-ee  # 8996 and later using EE
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f9bff000 {
+        compatible = "qcom,prng";
+        reg = <0xf9bff000 0x200>;
+        clocks = <&clk 125>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
index 676950bb7b37..5b31891c97fe 100644
--- a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
+++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
@@ -24,7 +24,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
     maxItems: 2
 
   clock-names:
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
index a410d2cedde6..0c15fefb6671 100644
--- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -15,6 +15,7 @@ properties:
       - ti,j721e-sa2ul
       - ti,am654-sa2ul
       - ti,am64-sa2ul
+      - ti,am62-sa3ul
 
   reg:
     maxItems: 1
@@ -34,8 +35,6 @@ properties:
       - const: rx1
       - const: rx2
 
-  dma-coherent: true
-
   "#address-cells":
     const: 2
 
@@ -71,16 +70,6 @@ required:
   - dmas
   - dma-names
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,j721e-sa2ul
-        - ti,am654-sa2ul
-then:
-  required:
-    - dma-coherent
-
 additionalProperties: false
 
 examples:
@@ -94,5 +83,4 @@ examples:
         dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
                <&main_udmap 0x4001>;
         dma-names = "tx", "rx1", "rx2";
-        dma-coherent;
     };
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
index 55dd6e3d270d..9e8fbd02b150 100644
--- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings
+title: Xilinx ZynqMP AES-GCM Hardware Accelerator
 
 maintainers:
   - Kalyani Akula <kalyani.akula@xilinx.com>
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
index d318fccf78f1..2bdd05af6079 100644
--- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos NoC (Network on Chip) Probe
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
index c9a8cb5fd555..e300df4b47f3 100644
--- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
deleted file mode 100644
index bcaa2c08ac11..000000000000
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ /dev/null
@@ -1,488 +0,0 @@
-* Generic Exynos Bus frequency device
-
-The Samsung Exynos SoC has many buses for data transfer between DRAM
-and sub-blocks in SoC. Most Exynos SoCs share the common architecture
-for buses. Generally, each bus of Exynos SoC includes a source clock
-and a power line, which are able to change the clock frequency
-of the bus in runtime. To monitor the usage of each bus in runtime,
-the driver uses the PPMU (Platform Performance Monitoring Unit), which
-is able to measure the current load of sub-blocks.
-
-The Exynos SoC includes the various sub-blocks which have the each AXI bus.
-The each AXI bus has the owned source clock but, has not the only owned
-power line. The power line might be shared among one more sub-blocks.
-So, we can divide into two type of device as the role of each sub-block.
-There are two type of bus devices as following:
-- parent bus device
-- passive bus device
-
-Basically, parent and passive bus device share the same power line.
-The parent bus device can only change the voltage of shared power line
-and the rest bus devices (passive bus device) depend on the decision of
-the parent bus device. If there are three blocks which share the VDD_xxx
-power line, Only one block should be parent device and then the rest blocks
-should depend on the parent device as passive device.
-
-	VDD_xxx |--- A block (parent)
-		|--- B block (passive)
-		|--- C block (passive)
-
-There are a little different composition among Exynos SoC because each Exynos
-SoC has different sub-blocks. Therefore, such difference should be specified
-in devicetree file instead of each device driver. In result, this driver
-is able to support the bus frequency for all Exynos SoCs.
-
-Required properties for all bus devices:
-- compatible: Should be "samsung,exynos-bus".
-- clock-names : the name of clock used by the bus, "bus".
-- clocks : phandles for clock specified in "clock-names" property.
-- operating-points-v2: the OPP table including frequency/voltage information
-  to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
-
-Required properties only for parent bus device:
-- vdd-supply: the regulator to provide the buses with the voltage.
-- devfreq-events: the devfreq-event device to monitor the current utilization
-  of buses.
-
-Required properties only for passive bus device:
-- devfreq: the parent bus device.
-
-Optional properties only for parent bus device:
-- exynos,saturation-ratio: the percentage value which is used to calibrate
-			the performance count against total cycle count.
-
-Optional properties for the interconnect functionality (QoS frequency
-constraints):
-- #interconnect-cells: should be 0.
-- interconnects: as documented in ../interconnect.txt, describes a path at the
-  higher level interconnects used by this interconnect provider.
-  If this interconnect provider is directly linked to a top level interconnect
-  provider the property contains only one phandle. The provider extends
-  the interconnect graph by linking its node to a node registered by provider
-  pointed to by first phandle in the 'interconnects' property.
-
-- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data
-   clock frequency in Hz, default value is 8 when this property is missing.
-
-Detailed correlation between sub-blocks and power line according to Exynos SoC:
-- In case of Exynos3250, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC
-		|--- G3D
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- FSYS
-		|--- LCD0
-		|--- PERIR
-		|--- ISP
-		|--- CAM
-
-- In case of Exynos4210, there is one power line as following:
-	VDD_INT |--- DMC (parent device)
-		|--- LEFTBUS
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- LCD0
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- LCD1
-
-- In case of Exynos4x12, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- IMAGE
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- ISP
-
-- In case of Exynos5422, there are two power line as following:
-	VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
-	        |--- DREX 1
-
-	VDD_INT |--- NoC_Core (parent device)
-		|--- G2D
-		|--- G3D
-		|--- DISP1
-		|--- NoC_WCORE
-		|--- GSCL
-		|--- MSCL
-		|--- ISP
-		|--- MFC
-		|--- GEN
-		|--- PERIS
-		|--- PERIC
-		|--- FSYS
-		|--- FSYS2
-
-- In case of Exynos5433, there is VDD_INT power line as following:
-	VDD_INT |--- G2D (parent device)
-		|--- MSCL
-		|--- GSCL
-		|--- JPEG
-		|--- MFC
-		|--- HEVC
-		|--- BUS0
-		|--- BUS1
-		|--- BUS2
-		|--- PERIS (Fixed clock rate)
-		|--- PERIC (Fixed clock rate)
-		|--- FSYS  (Fixed clock rate)
-
-Example 1:
-	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
-	power line (regulator). The MIF (Memory Interface) AXI bus is used to
-	transfer data between DRAM and CPU and uses the VDD_MIF regulator.
-
-	- MIF (Memory Interface) block
-	: VDD_MIF |--- DMC (Dynamic Memory Controller)
-
-	- INT (Internal) block
-	: VDD_INT |--- LEFTBUS (parent device)
-		  |--- PERIL
-		  |--- MFC
-		  |--- G3D
-		  |--- RIGHTBUS
-		  |--- FSYS
-		  |--- LCD0
-		  |--- PERIR
-		  |--- ISP
-		  |--- CAM
-
-	- MIF bus's frequency/voltage table
-	-----------------------
-	|Lv| Freq   | Voltage |
-	-----------------------
-	|L1| 50000  |800000   |
-	|L2| 100000 |800000   |
-	|L3| 134000 |800000   |
-	|L4| 200000 |825000   |
-	|L5| 400000 |875000   |
-	-----------------------
-
-	- INT bus's frequency/voltage table
-	----------------------------------------------------------
-	|Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
-	| name|       |LCD0    |       |       |       ||        |
-	|     |       |FSYS    |       |       |       ||        |
-	|     |       |MFC     |       |       |       ||        |
-	----------------------------------------------------------
-	|Mode |*parent|passive |passive|passive|passive||        |
-	----------------------------------------------------------
-	|Lv   |Frequency                               ||Voltage |
-	----------------------------------------------------------
-	|L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
-	|L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
-	|L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
-	|L4   |134000 |134000  |200000 |200000 |       ||1000000 |
-	|L5   |200000 |200000  |400000 |300000 |       ||1000000 |
-	----------------------------------------------------------
-
-Example 2:
-	The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
-	is listed below:
-
-	bus_dmc: bus_dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu_dmc CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <875000>;
-		};
-	};
-
-	bus_leftbus: bus_leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_rightbus: bus_rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_lcd0: bus_lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mcuisp: bus_mcuisp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mcuisp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_isp: bus_isp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_266>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_isp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peril: bus_peril {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peril_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-		};
-	};
-
-	bus_mcuisp_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-	};
-
-	bus_isp_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_peril_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-	};
-
-
-	Usage case to handle the frequency and voltage of bus on runtime
-	in exynos3250-rinato.dts is listed below:
-
-	&bus_dmc {
-		devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-		vdd-supply = <&buck1_reg>;	/* VDD_MIF */
-		status = "okay";
-	};
-
-	&bus_leftbus {
-		devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-		vdd-supply = <&buck3_reg>;
-		status = "okay";
-	};
-
-	&bus_rightbus {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_lcd0 {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_fsys {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mcuisp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_isp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_peril {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mfc {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-Example 3:
-	An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on
-	Exynos4412 SoC with video mixer as an interconnect consumer device.
-
-	soc {
-		bus_dmc: bus_dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-		};
-
-		bus_leftbus: bus_leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			#interconnect-cells = <0>;
-			interconnects = <&bus_dmc>;
-		};
-
-		bus_display: bus_display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			#interconnect-cells = <0>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-		};
-
-		bus_dmc_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			/* ... */
-		}
-
-		bus_leftbus_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-			/* ... */
-		};
-
-		bus_display_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			/* .. */
-		};
-
-		&mixer {
-			compatible = "samsung,exynos4212-mixer";
-			interconnects = <&bus_display &bus_dmc>;
-			/* ... */
-		};
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
deleted file mode 100644
index 58fc8a6cebc7..000000000000
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-* Rockchip rk3399 DMC (Dynamic Memory Controller) device
-
-Required properties:
-- compatible:		 Must be "rockchip,rk3399-dmc".
-- devfreq-events:	 Node to get DDR loading, Refer to
-			 Documentation/devicetree/bindings/devfreq/event/
-			 rockchip-dfi.txt
-- clocks:		 Phandles for clock specified in "clock-names" property
-- clock-names :		 The name of clock used by the DFI, must be
-			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-			 for details.
-- center-supply:	 DMC supply node.
-- status:		 Marks the node enabled/disabled.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Optional properties:
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Following properties relate to DDR timing:
-
-- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-				  it selects the DDR3 cl-trp-trcd type. It must be
-				  set according to "Speed Bin" in DDR3 datasheet,
-				  DO NOT use a smaller "Speed Bin" than specified
-				  for the DDR3 being used.
-
-- rockchip,pd_idle :		  Configure the PD_IDLE value. Defines the
-				  power-down idle period in which memories are
-				  placed into power-down mode if bus is idle
-				  for PD_IDLE DFI clock cycles.
-
-- rockchip,sr_idle :		  Configure the SR_IDLE value. Defines the
-				  self-refresh idle period in which memories are
-				  placed into self-refresh mode if bus is idle
-				  for SR_IDLE * 1024 DFI clock cycles (DFI
-				  clocks freq is half of DRAM clock), default
-				  value is "0".
-
-- rockchip,sr_mc_gate_idle :	  Defines the memory self-refresh and controller
-				  clock gating idle period. Memories are placed
-				  into self-refresh mode and memory controller
-				  clock arg gating started if bus is idle for
-				  sr_mc_gate_idle*1024 DFI clock cycles.
-
-- rockchip,srpd_lite_idle :	  Defines the self-refresh power down idle
-				  period in which memories are placed into
-				  self-refresh power down mode if bus is idle
-				  for srpd_lite_idle * 1024 DFI clock cycles.
-				  This parameter is for LPDDR4 only.
-
-- rockchip,standby_idle :	  Defines the standby idle period in which
-				  memories are placed into self-refresh mode.
-				  The controller, pi, PHY and DRAM clock will
-				  be gated if bus is idle for standby_idle * DFI
-				  clock cycles.
-
-- rockchip,dram_dll_dis_freq :	  Defines the DDR3 DLL bypass frequency in MHz.
-				  When DDR frequency is less than DRAM_DLL_DISB_FREQ,
-				  DDR3 DLL will be bypassed. Note: if DLL was bypassed,
-				  the odt will also stop working.
-
-- rockchip,phy_dll_dis_freq :	  Defines the PHY dll bypass frequency in
-				  MHz (Mega Hz). When DDR frequency is less than
-				  DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
-				  Note: PHY DLL and PHY ODT are independent.
-
-- rockchip,ddr3_odt_dis_freq :	  When the DRAM type is DDR3, this parameter defines
-				  the ODT disable frequency in MHz (Mega Hz).
-				  when the DDR frequency is  less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 40.
-
-- rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 120.
-
-- rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the phy side CA line (incluing command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side ODT strength. Default value is 240.
-
-- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
-				  then ODT disable frequency in MHz (Mega Hz).
-				  When DDR frequency is less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 34.
-
-- rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 240.
-
-- rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side CA line (including command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
-				  the phy side odt strength, default value is 240.
-
-- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
-				  defines the ODT disable frequency in
-				  MHz (Mega Hz). When the DDR frequency is less then
-				  ddr3_odt_dis_freq, the ODT on the DRAM side and
-				  controller side are both disabled.
-
-- rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 60.
-
-- rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on DQS/DQ line strength in ohms.
-				  Default value is 40.
-
-- rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on CA line strength in ohms.
-				  Default value is 40.
-
-- rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side CA line (including command address
-				  line) driver strength. Default value is 40.
-
-- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side clock line and CS line driver
-				  strength. Default value is 80.
-
-- rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 80.
-
-- rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side ODT strength. Default value is 60.
-
-Example:
-	dmc_opp_table: dmc_opp_table {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <666000000>;
-			opp-microvolt = <900000>;
-		};
-	};
-
-	dmc: dmc {
-		compatible = "rockchip,rk3399-dmc";
-		devfreq-events = <&dfi>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DDRC>;
-		clock-names = "dmc_clk";
-		operating-points-v2 = <&dmc_opp_table>;
-		center-supply = <&ppvar_centerlogic>;
-		upthreshold = <15>;
-		downdifferential = <10>;
-		rockchip,ddr3_speed_bin = <21>;
-		rockchip,pd_idle = <0x40>;
-		rockchip,sr_idle = <0x2>;
-		rockchip,sr_mc_gate_idle = <0x3>;
-		rockchip,srpd_lite_idle	= <0x4>;
-		rockchip,standby_idle = <0x2000>;
-		rockchip,dram_dll_dis_freq = <300>;
-		rockchip,phy_dll_dis_freq = <125>;
-		rockchip,auto_pd_dis_freq = <666>;
-		rockchip,ddr3_odt_dis_freq = <333>;
-		rockchip,ddr3_drv = <40>;
-		rockchip,ddr3_odt = <120>;
-		rockchip,phy_ddr3_ca_drv = <40>;
-		rockchip,phy_ddr3_dq_drv = <40>;
-		rockchip,phy_ddr3_odt = <240>;
-		rockchip,lpddr3_odt_dis_freq = <333>;
-		rockchip,lpddr3_drv = <34>;
-		rockchip,lpddr3_odt = <240>;
-		rockchip,phy_lpddr3_ca_drv = <40>;
-		rockchip,phy_lpddr3_dq_drv = <40>;
-		rockchip,phy_lpddr3_odt = <240>;
-		rockchip,lpddr4_odt_dis_freq = <333>;
-		rockchip,lpddr4_drv = <60>;
-		rockchip,lpddr4_dq_odt = <40>;
-		rockchip,lpddr4_ca_odt = <40>;
-		rockchip,phy_lpddr4_ca_drv = <40>;
-		rockchip,phy_lpddr4_ck_cs_drv = <80>;
-		rockchip,phy_lpddr4_dq_drv = <80>;
-		rockchip,phy_lpddr4_odt = <60>;
-	};
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
index 3d8ea3c2d8dd..ba06d1857b7d 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Backend Device Tree Bindings
+title: Allwinner A10 Display Engine Backend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index e77523b02fad..e6088f379f70 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
+title: Allwinner A10 Display Engine Pipeline
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -62,6 +62,7 @@ properties:
       - allwinner,sun8i-r40-display-engine
       - allwinner,sun8i-v3s-display-engine
       - allwinner,sun9i-a80-display-engine
+      - allwinner,sun20i-d1-display-engine
       - allwinner,sun50i-a64-display-engine
       - allwinner,sun50i-h6-display-engine
 
@@ -69,6 +70,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 2
+    items:
+      maxItems: 1
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
@@ -91,6 +94,7 @@ if:
           - allwinner,sun8i-a83t-display-engine
           - allwinner,sun8i-r40-display-engine
           - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
           - allwinner,sun50i-a64-display-engine
 
 then:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 055157fbf3bf..98e8240a05bd 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Frontend Device Tree Bindings
+title: Allwinner A10 Display Engine Frontend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 7f11452539f4..55703caacb9c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 HDMI Controller Device Tree Bindings
+title: Allwinner A10 HDMI Controller
 
 description: |
   The HDMI Encoder supports the HDMI video and audio outputs, and does
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index 3a7d5d731712..724d93b9193b 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings
+title: Allwinner A10 Timings Controller (TCON)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -33,6 +33,8 @@ properties:
       - const: allwinner,sun8i-v3s-tcon
       - const: allwinner,sun9i-a80-tcon-lcd
       - const: allwinner,sun9i-a80-tcon-tv
+      - const: allwinner,sun20i-d1-tcon-lcd
+      - const: allwinner,sun20i-d1-tcon-tv
 
       - items:
           - enum:
@@ -231,6 +233,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-lcd
               - allwinner,sun8i-v3s-tcon
               - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
@@ -250,6 +253,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-tv
               - allwinner,sun8i-r40-tcon-tv
               - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
 
     then:
       properties:
@@ -276,6 +280,7 @@ allOf:
               - allwinner,sun9i-a80-tcon-lcd
               - allwinner,sun4i-a10-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       required:
@@ -292,6 +297,7 @@ allOf:
               - allwinner,sun8i-a23-tcon
               - allwinner,sun8i-a33-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index afc0ed799e0e..c39e90a5945f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TV Encoder Device Tree Bindings
+title: Allwinner A10 TV Encoder
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 71cce5687580..895506d93f4c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
+title: Allwinner A31 Dynamic Range Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index bf0bdf54e5f9..7910831fa4b8 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
+title: Allwinner A31 MIPI-DSI Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
index 4f91eec26de9..b75c1ec686ad 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
+title: Allwinner Display Engine 2.0 Mixer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,6 +19,8 @@ properties:
       - allwinner,sun8i-r40-de2-mixer-0
       - allwinner,sun8i-r40-de2-mixer-1
       - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun20i-d1-de2-mixer-0
+      - allwinner,sun20i-d1-de2-mixer-1
       - allwinner,sun50i-a64-de2-mixer-0
       - allwinner,sun50i-a64-de2-mixer-1
       - allwinner,sun50i-h6-de3-mixer-0
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4951b5ef5c6a..60fd927b5a06 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
+title: Allwinner A83t DWC HDMI TX Encoder
 
 description: |
   The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
index a97366aaf924..1b47f3d99a78 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t HDMI PHY Device Tree Bindings
+title: Allwinner A83t HDMI PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
index 61ef7b337218..7d849c4095a3 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 TCON TOP Device Tree Bindings
+title: Allwinner R40 TCON TOP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -41,6 +41,7 @@ properties:
   compatible:
     enum:
       - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun20i-d1-tcon-top
       - allwinner,sun50i-h6-tcon-top
 
   reg:
@@ -48,31 +49,15 @@ properties:
 
   clocks:
     minItems: 2
-    items:
-      - description: The TCON TOP interface clock
-      - description: The TCON TOP TV0 clock
-      - description: The TCON TOP TVE0 clock
-      - description: The TCON TOP TV1 clock
-      - description: The TCON TOP TVE1 clock
-      - description: The TCON TOP MIPI DSI clock
+    maxItems: 6
 
   clock-names:
     minItems: 2
-    items:
-      - const: bus
-      - const: tcon-tv0
-      - const: tve0
-      - const: tcon-tv1
-      - const: tve1
-      - const: dsi
+    maxItems: 6
 
   clock-output-names:
     minItems: 1
     maxItems: 3
-    description: >
-      The first item is the name of the clock created for the TV0
-      channel, the second item is the name of the TCON TV1 channel
-      clock and the third one is the name of the DSI channel clock.
 
   resets:
     maxItems: 1
@@ -129,32 +114,92 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: allwinner,sun50i-h6-tcon-top
-
-then:
-  properties:
-    clocks:
-      maxItems: 2
-
-    clock-output-names:
-      maxItems: 1
-
-else:
-  properties:
-    clocks:
-      minItems: 6
-
-    clock-output-names:
-      minItems: 3
-
-    ports:
-      required:
-        - port@2
-        - port@3
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-r40-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP TV1 clock
+            - description: The TCON TOP TVE1 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: tcon-tv1
+            - const: tve1
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: TCON TV1 output clock name
+            - description: DSI output clock name
+
+        ports:
+          required:
+            - port@2
+            - port@3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun20i-d1-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: DSI output clock name
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
index 637372ec4614..193afee2c3c1 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
+title: Allwinner A80 Detail Enhancement Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f10..7cdffdb131ac 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -8,7 +8,10 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
 
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
@@ -145,4 +150,3 @@ examples:
              };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 851cb0781217..6655a93b1874 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Display Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson Display controller is composed of several components
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
deleted file mode 100644
index 78bc24296f3e..000000000000
--- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-ARM HDLCD
-
-This is a display controller found on several development platforms produced
-by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
-streamer that reads the data from a framebuffer and sends it to a single
-digital encoder (DVI or HDMI).
-
-Required properties:
-  - compatible: "arm,hdlcd"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: One interrupt used by the display controller to notify the
-    interrupt controller when any of the interrupt sources programmed in
-    the interrupt mask register have activated.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For HDLCD it should contain:
-      - "pxlclk" for the clock feeding the output PLL of the controller.
-
-Required sub-nodes:
-  - port: The HDLCD connection to an encoder chip. The connection is modeled
-    using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt.
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
-    used for the framebuffer; if not present, the framebuffer may be located
-    anywhere in memory.
-
-
-Example:
-
-/ {
-	...
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-		port {
-			hdlcd_output: endpoint@0 {
-				remote-endpoint = <&hdmi_enc_input>;
-			};
-		};
-	};
-
-	/* HDMI encoder on I2C bus */
-	i2c@7ffa0000 {
-		....
-		hdmi-transmitter@70 {
-			compatible = ".....";
-			reg = <0x70>;
-			port@0 {
-				hdmi_enc_input: endpoint {
-					remote-endpoint = <&hdlcd_output>;
-				};
-
-				hdmi_enc_output: endpoint {
-					remote-endpoint = <&hdmi_1_port>;
-				};
-			};
-		};
-
-	};
-
-	hdmi1: connector@1 {
-		compatible = "hdmi-connector";
-		type = "a";
-		port {
-			hdmi_1_port: endpoint {
-				remote-endpoint = <&hdmi_enc_output>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 000000000000..a2670258c48d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller binding
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm HDLCD is a display controller found on several development platforms
+  produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+  RGB streamer that reads the data from a framebuffer and sends it to a single
+  digital encoder (DVI or HDMI).
+
+properties:
+  compatible:
+    const: arm,hdlcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: pxlclk
+
+  clocks:
+    maxItems: 1
+    description: The input reference for the pixel clock.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - port
+
+examples:
+  - |
+    hdlcd@2b000000 {
+        compatible = "arm,hdlcd";
+        reg = <0x2b000000 0x1000>;
+        interrupts = <0 85 4>;
+        clocks = <&oscclk5>;
+        clock-names = "pxlclk";
+        port {
+            hdlcd_output: endpoint {
+                remote-endpoint = <&hdmi_enc_input>;
+            };
+        };
+    };
+
+    /* HDMI encoder on I2C bus */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi-transmitter@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            port {
+                hdmi_enc_input: endpoint {
+                    remote-endpoint = <&hdlcd_output>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 000000000000..3ad3eef89ca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Mali D71 display processor supports up to two displays with up
+  to a 4K resolution each. Each pipeline can be composed of up to four
+  layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mali-d32
+          - const: arm,mali-d71
+      - const: arm,mali-d71
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aclk
+
+  clocks:
+    maxItems: 1
+    description: The main DPU processor clock
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    description:
+      The stream IDs for each of the used pipelines, each four IDs for the
+      four layers, plus one for the write-back stream.
+    minItems: 5
+    maxItems: 10
+
+patternProperties:
+  '^pipeline@[01]$':
+    type: object
+    additionalProperties: false
+    description:
+      clocks
+
+    properties:
+      reg:
+        enum: [ 0, 1 ]
+
+      clock-names:
+        const: pxclk
+
+      clocks:
+        maxItems: 1
+        description: The input reference for the pixel clock.
+
+      port:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - pipeline@0
+
+examples:
+  - |
+    display@c00000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "arm,mali-d71";
+        reg = <0xc00000 0x20000>;
+        interrupts = <168>;
+        clocks = <&dpu_aclk>;
+        clock-names = "aclk";
+        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+                 <&smmu 8>,
+                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+                 <&smmu 9>;
+
+        dp0_pipe0: pipeline@0 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <0>;
+
+            port {
+                dp0_pipe0_out: endpoint {
+                    remote-endpoint = <&db_dvi0_in>;
+                };
+            };
+        };
+
+        dp0_pipe1: pipeline@1 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <1>;
+
+            port {
+                dp0_pipe1_out: endpoint {
+                    remote-endpoint = <&db_dvi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a..000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
-  - compatible: should be one of
-	"arm,mali-dp500"
-	"arm,mali-dp550"
-	"arm,mali-dp650"
-    depending on the particular implementation present in the hardware
-  - reg: Physical base address and size of the block of registers used by
-    the processor.
-  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
-    interrupt client nodes.
-  - interrupt-names: name of the engine inside the processor that will
-    use the corresponding interrupt. Should be one of "DE" or "SE".
-  - clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-  - clock-names: A list of clock names. It should contain:
-      - "pclk": for the APB interface clock
-      - "aclk": for the AXI interface clock
-      - "mclk": for the main processor clock
-      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
-  - arm,malidp-output-port-lines: Array of u8 values describing the number
-    of output lines per channel (R, G and B).
-
-Required sub-nodes:
-  - port: The Mali DP connection to an encoder input port. The connection
-    is modelled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
-    levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
-	...
-
-	dp0: malidp@6f200000 {
-		compatible = "arm,mali-dp650";
-		reg = <0 0x6f200000 0 0x20000>;
-		memory-region = <&display_reserved>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "DE", "SE";
-		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
-		clock-names = "pxlclk", "mclk", "aclk", "pclk";
-		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-		arm,malidp-arqos-high-level = <0xd000d000>;
-		port {
-			dp0_output: endpoint {
-				remote-endpoint = <&tda998x_2_input>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 000000000000..2a17ec6fc97c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP) binding
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-value = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
deleted file mode 100644
index 3f977e72a200..000000000000
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* ARM PrimeCell Color LCD Controller PL110/PL111
-
-See also Documentation/devicetree/bindings/arm/primecell.yaml
-
-Required properties:
-
-- compatible: must be one of:
-	"arm,pl110", "arm,primecell"
-	"arm,pl111", "arm,primecell"
-
-- reg: base address and size of the control registers block
-
-- interrupt-names: either the single entry "combined" representing a
-	combined interrupt output (CLCDINTR), or the four entries
-	"mbe", "vcomp", "lnbu", "fuf" representing the individual
-	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
-
-- interrupts: contains an interrupt specifier for each entry in
-	interrupt-names
-
-- clock-names: should contain "clcdclk" and "apb_pclk"
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- memory-region: phandle to a node describing memory (see
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-	to be used for the framebuffer; if not present, the framebuffer
-	may be located anywhere in the memory
-
-- max-memory-bandwidth: maximum bandwidth in bytes per second that the
-	cell's memory interface can handle; if not present, the memory
-	interface is fast enough to handle all possible video modes
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Deprecated properties:
-	The port's endbpoint subnode had this, now deprecated property
-	in the past. Drivers should be able to survive without it:
-
-	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
-		defining the way CLD pads are wired up; first value
-		contains index of the "CLD" external pin (pad) used
-		as R0 (first bit of the red component), second value
-	        index of the pad used as G0, third value index of the
-		pad used as B0, see also "LCD panel signal multiplexing
-		details" paragraphs in the PL110/PL111 Technical
-		Reference Manuals; this implicitly defines available
-		color modes, for example:
-		- PL111 TFT 4:4:4 panel:
-			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
-		- PL110 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
-		- PL111 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
-		- PL111 TFT 5:6:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
-		- PL110 and PL111 TFT 8:8:8 panel:
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
-			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
-
-
-Example:
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupt-names = "combined";
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
-
-		port {
-			clcd_pads: endpoint {
-				remote-endpoint = <&clcd_panel>;
-			};
-		};
-
-	};
-
-	panel {
-		compatible = "panel-dpi";
-
-		port {
-			clcd_panel: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <25175000>;
-			hactive = <640>;
-			hback-porch = <40>;
-			hfront-porch = <24>;
-			hsync-len = <96>;
-			vactive = <480>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 000000000000..6cc9045e5c68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+  a framebuffer region in system memory, and creates timed signals for
+  a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl110
+          - arm,pl111
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl110
+          - arm,pl111
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The IP provides four individual interrupt lines, but also one
+          combined line. If the integration only connects this line to the
+          interrupt controller, this single interrupt is noted here.
+      - items:
+          - const: mbe        # CLCDMBEINTR
+          - const: vcomp      # CLCDVCOMPINTR
+          - const: lnbu       # CLCDLNBUINTR
+          - const: fuf        # CLCDFUFINTR
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: clcdclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: The CLCDCLK reference clock for the controller.
+      - description: The HCLK AHB slave clock for the register access.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum bandwidth in bytes per second that the cell's memory interface
+      can handle.
+      If not present, the memory interface is fast enough to handle all
+      possible video modes.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          arm,pl11x,tft-r0g0b0-pads:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: index of CLD pad used for first red bit (R0)
+              - description: index of CLD pad used for first green bit (G0)
+              - description: index of CLD pad used for first blue bit (G0)
+            deprecated: true
+            description: |
+              DEPRECATED. An array of three 32-bit values, defining the way
+              CLD[23:0] pads are wired up.
+              The first value contains the index of the "CLD" external pin (pad)
+              used as R0 (first bit of the red component), the second value for
+              green, the third value for blue.
+              See also "LCD panel signal multiplexing details" paragraphs in the
+              PL110/PL111 Technical Reference Manuals.
+              This implicitly defines available color modes, for example:
+              - PL111 TFT 4:4:4 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+              - PL110 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+              - PL111 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+              - PL111 TFT 5:6:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+              - PL110 and PL111 TFT 8:8:8 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+              - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+                  arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - port
+
+allOf:
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+examples:
+  - |
+    clcd@10020000 {
+        compatible = "arm,pl111", "arm,primecell";
+        reg = <0x10020000 0x1000>;
+        interrupt-names = "combined";
+        interrupts = <44>;
+        clocks = <&oscclk1>, <&oscclk2>;
+        clock-names = "clcdclk", "apb_pclk";
+        max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+        port {
+            clcd_pads: endpoint {
+                remote-endpoint = <&clcd_panel>;
+            };
+        };
+    };
+
+    panel {
+        compatible = "arm,rtsm-display";
+
+        port {
+            clcd_panel: endpoint {
+                remote-endpoint = <&clcd_pads>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
index acb5a0132127..b5e355ada2fa 100644
--- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
@@ -9,7 +9,6 @@ Required properties:
 	"atmel,at91sam9g45-lcdc" ,
 	"atmel,at91sam9g45es-lcdc" ,
 	"atmel,at91sam9rl-lcdc" ,
-	"atmel,at32ap-lcdc"
 - reg : Should contain 1 register ranges(address and length).
 	Can contain an additional register range(address and length)
 	for fixed framebuffer memory. Useful for dedicated memories.
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a32660e0..5b35adf34c7b 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+title: Broadcom BCM2711 HDMI Controller
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -72,8 +72,7 @@ properties:
       - const: hpd-removed
 
   ddc:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: >
       Phandle of the I2C controller used for DDC EDID probing
 
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a79b909..5bbe81862c8f 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@ properties:
 
   adi,input-depth:
     description: Number of bits per color component at the input.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 8, 10, 12 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
 
   adi,input-colorspace:
     description: Input color space.
@@ -118,23 +117,21 @@ properties:
 
   ports:
     description:
-      The ADV7511(W)/13 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7511(W)/13 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description: Video port for the RGB or YUV input.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 # adi,input-colorspace and adi,input-clock are required except in
 # "rgb 1x" and "yuv444 1x" modes, in which case they must not be
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index f36209137c8a..987aa83c2649 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -91,25 +91,23 @@ properties:
 
   ports:
     description:
-      The ADV7533/35 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7533/35 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description:
           Video port for the DSI input. The remote endpoint phandle
           should be a reference to a valid mipi_dsi_host_device.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 1d3e88daca04..4590186c4a0b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -83,6 +83,9 @@ properties:
     type: boolean
     description: let the driver enable audio HDMI codec function or not.
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -103,7 +106,7 @@ properties:
               remote-endpoint: true
 
               bus-type:
-                enum: [1, 5]
+                enum: [7]
                 default: 1
 
               data-lanes: true
@@ -155,7 +158,7 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
-                        bus-type = <5>;
+                        bus-type = <7>;
                         data-lanes = <0 1 2 3>;
                     };
                 };
@@ -167,5 +170,19 @@ examples:
                     };
                 };
             };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
index 8e13f27b28ed..4a5e5d9d6f90 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
 
 maintainers:
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
index 62c3bd4cb28d..5fb54375aeb6 100644
--- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -24,6 +24,15 @@ properties:
     maxItems: 1
     description: virtual channel number of a DSI peripheral
 
+  clock-names:
+    const: refclk
+
+  clocks:
+    maxItems: 1
+    description: |
+        Optional external clock connected to REF_CLK input.
+        The clock rate must be in 10..154 MHz range.
+
   enable-gpios:
     description: Bridge EN pin, chip is reset when EN is low.
 
@@ -41,17 +50,32 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           Video port for MIPI DSI input
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 000000000000..94543006f5de
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+  The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the LDB's configuration
+  registers.
+
+  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+  format and can map the input to VESA or JEIDA standards.  The two channels
+  cannot be used simultaneously, that is to say, the user should pick one of
+  them to use.  Two LDB channels from two LDB instances can work together in
+  LDB split mode to support a dual link LVDS display.  The channel indexes
+  have to be different.  Channel0 outputs odd pixels and channel1 outputs
+  even pixels.
+
+  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+  input color format.  The two channels can be used simultaneously, either
+  in dual mode or split mode.  In dual mode, the two channels output identical
+  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
+  pixels.
+
+  A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+  the SoC reference manuals.  The pixel mapper uses logic of LDBs embedded in
+  i.MX6qdl/sx SoCs, i.e., it is essentially based on them.  To keep the naming
+  consistency, this binding calls it LDB.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-ldb
+      - fsl,imx8qxp-ldb
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: pixel clock
+      - description: bypass clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: bypass
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-ldb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of LDB.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The channel index.
+        enum: [ 0, 1 ]
+
+      phys:
+        description: A phandle to the phy module representing the LVDS PHY.
+        maxItems: 1
+
+      phy-names:
+        const: lvds_phy
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port of the channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port of the channel.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - phys
+      - phy-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - channel@0
+  - channel@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-ldb
+    then:
+      properties:
+        fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    ldb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx8qxp-ldb";
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+        clock-names = "pixel", "bypass";
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 000000000000..50bae2122183
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+  single display controller and manipulates the two streams to support a number
+  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+  either one screen, two screens, or virtual screens.  The pixel combiner is
+  also responsible for generating some of the control signals for the pixel link
+  output channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-pixel-combiner
+      - fsl,imx8qxp-pixel-combiner
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a display stream of pixel combiner.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The display stream index.
+        enum: [ 0, 1 ]
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the display stream.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the display stream.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pixel-combiner@56020000 {
+        compatible = "fsl,imx8qxp-pixel-combiner";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x56020000 0x10000>;
+        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "apb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 000000000000..38ecc7926fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+  asynchronous linkage between pixel sources(display controller or
+  camera module) and pixel consumers(imaging or displays).
+  It consists of two distinct functions, a pixel transfer function and a
+  control interface.  Multiple pixel channels can exist per one control channel.
+  This binding documentation is only for pixel links whose pixel sources are
+  display controllers.
+
+  The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+  firmware.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-dc-pixel-link
+      - fsl,imx8qxp-dc-pixel-link
+
+  fsl,dc-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller index that the pixel link
+      connects to.
+
+  fsl,dc-stream-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller stream index that the pixel
+      link connects to.
+    enum: [0, 1]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link input port node from upstream video source.
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          enum: [0, 1]
+
+required:
+  - compatible
+  - fsl,dc-id
+  - fsl,dc-stream-id
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc0-pixel-link0 {
+        compatible = "fsl,imx8qxp-dc-pixel-link";
+        fsl,dc-id = /bits/ 8 <0>;
+        fsl,dc-stream-id = /bits/ 8 <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* from dc0 pixel combiner channel0 */
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+                };
+            };
+
+            /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+                };
+
+                dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+                };
+            };
+
+            /* unused */
+            port@2 {
+                reg = <2>;
+            };
+
+            /* unused */
+            port@3 {
+                reg = <3>;
+            };
+
+            /* to imaging subsystem */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 000000000000..e4e77fad05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  fsl,sc-resource:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SCU resource ID associated with this PXL2DPI instance.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - fsl,sc-resource
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 000000000000..b19be0804abe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The i.MX8MP mediamix contains two registers which are responsible
+  for configuring the on-SoC DPI-to-LVDS serializer. This describes
+  those registers as bridge within the DT.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-ldb
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ldb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ldb
+      - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    blk-ctrl {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
index 9f7cc6b757cb..a44d025d33bd 100644
--- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
@@ -79,4 +78,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 000000000000..89490fdffeb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index 6ec1d5fbb8bc..1b2185be92cd 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -8,7 +8,7 @@ title: ITE it66121 HDMI bridge Device Tree Bindings
 
 maintainers:
   - Phong LE <ple@baylibre.com>
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The IT66121 is a high-performance and low-power single channel HDMI
@@ -38,6 +38,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 000000000000..9a6e9b25d14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9211
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vccio-supply:
+    description: Regulator for 1.8V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI input or
+          LVDS port-1 for LVDS input or DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input or LVDS port-2
+          for LVDS input. Used in combination with primary
+          port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI output or
+          LVDS port-1 for LVDS output or DPI output.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI output or LVDS port-2
+          for LVDS output. Used in combination with primary
+          port-1 to drive higher resolution displays.
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9211";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&lt9211_1v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 5079c1cc337b..84aafcbf0919 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -39,6 +39,7 @@ properties:
           - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
           - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
@@ -50,6 +51,7 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           For LVDS encoders, port 0 is the parallel input
           For LVDS decoders, port 0 is the LVDS input
@@ -67,7 +69,7 @@ properties:
                   - vesa-24
                 description: |
                   The color signals mapping order. See details in
-                  Documentation/devicetree/bindings/display/panel/lvds.yaml
+                  Documentation/devicetree/bindings/display/lvds.yaml
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 000000000000..c4bf54397473
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    const: nxp,tda998x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  video-ports:
+    default: 0x230145
+    maximum: 0xffffff
+    description:
+      24 bits value which defines how the video controller output is wired to
+      the TDA998x input.
+
+  audio-ports:
+    description:
+      Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+      The implementation allows one or two DAIs.
+      If two DAIs are defined, they must be of different type.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 1
+      items:
+        - description: |
+            The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+            (see include/dt-bindings/display/tda998x.h).
+        - description:
+            The second value defines the tda998x AP_ENA reg content when the
+            DAI in question is used.
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+
+  nxp,calib-gpios:
+    maxItems: 1
+    description:
+      Calibration GPIO, which must correspond with the gpio used for the
+      TDA998x interrupt pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Parallel input port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        type: object
+        description: Parallel input port
+
+      port@1:
+        type: object
+        description: HDMI output port
+
+required:
+  - compatible
+  - reg
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/tda998x.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda998x: hdmi-encoder@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            video-ports = <0x230145>;
+
+            #sound-dai-cells = <1>;
+                         /* DAI-format / AP_ENA reg value */
+            audio-ports = <TDA998x_SPDIF 0x04>,
+                          <TDA998x_I2S 0x03>;
+
+            port {
+                tda998x_in: endpoint {
+                    remote-endpoint = <&lcdc_0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index cdaf7a7a8f88..8ab156e0a8cf 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -8,7 +8,6 @@ title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   The PS8640 is a low power MIPI-to-eDP video format converter supporting
@@ -120,4 +119,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
index 0c9785c8db51..e3ec697f89e7 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -38,6 +38,9 @@ properties:
   clock-names:
     maxItems: 2
 
+  resets:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -67,6 +70,7 @@ required:
   - reg
   - clocks
   - clock-names
+  - resets
   - interrupts
   - ports
 
@@ -85,6 +89,7 @@ examples:
         clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
         clock-names = "iahb", "isfr";
         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index acfc327f70a7..bb9dbfb9beaf 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -28,6 +28,7 @@ properties:
       - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
       - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
       - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
       - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
       - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
       - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
@@ -94,7 +95,6 @@ then:
   properties:
     clocks:
       minItems: 1
-      maxItems: 4
       items:
         - description: Functional clock
         - description: EXTAL input clock
@@ -103,7 +103,6 @@ then:
 
     clock-names:
       minItems: 1
-      maxItems: 4
       items:
         - const: fck
         # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
@@ -127,12 +126,10 @@ then:
 else:
   properties:
     clocks:
-      maxItems: 1
       items:
         - description: Functional clock
 
     clock-names:
-      maxItems: 1
       items:
         - const: fck
 
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
deleted file mode 100644
index 3bc760cc31cb..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-sii902x HDMI bridge bindings
-
-Required properties:
-	- compatible: "sil,sii9022"
-	- reg: i2c address of the bridge
-
-Optional properties:
-	- interrupts: describe the interrupt line used to inform the host
-	  about hotplug events.
-	- reset-gpios: OF device-tree gpio specification for RST_N pin.
-	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
-	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
-
-	HDMI audio properties:
-	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
-	   is wired, <1> if the both are wired. HDMI audio is
-	   configured only if this property is found.
-	- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
-	   Each integer indicates which i2s pin is connected to which
-	   audio fifo. The first integer selects i2s audio pin for the
-	   first audio fifo#0 (HDMI channels 1&2), second for fifo#1
-	   (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
-	   pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
-	   but there can be no gaps. E.g. an i2s pin must be mapped to
-	   fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
-	   value is <0>, describing SD0 pin beiging routed to hdmi audio
-	   fifo #0.
-	- clocks: phandle and clock specifier for each clock listed in
-           the clock-names property
-	- clock-names: "mclk"
-	   Describes SII902x MCLK input. MCLK can be used to produce
-	   HDMI audio CTS values. This property follows
-	   Documentation/devicetree/bindings/clock/clock-bindings.txt
-	   consumer binding.
-
-	If HDMI audio is configured the sii902x device becomes an I2S
-	and/or spdif audio codec component (e.g a digital audio sink),
-	that can be used in configuring a full audio devices with
-	simple-card or audio-graph-card binding. See their binding
-	documents on how to describe the way the sii902x device is
-	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.yaml
-	Documentation/devicetree/bindings/sound/audio-graph-card.yaml
-	Note: In case of the audio-graph-card binding the used port
-	index should be 3.
-
-Optional subnodes:
-	- video input: this subnode can contain a video input port node
-	  to connect the bridge to a display controller output (See this
-	  documentation [1]).
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	hdmi-bridge@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		reset-gpios = <&pioA 1 0>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-
-		#sound-dai-cells = <0>;
-		sil,i2s-data-lanes = < 0 1 2 >;
-		clocks = <&mclk>;
-		clock-names = "mclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				bridge_in: endpoint {
-					remote-endpoint = <&dc_out>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
new file mode 100644
index 000000000000..5a69547ad3d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image sii902x HDMI bridge
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sil,sii9022-cpi # CEC Programming Interface
+              - sil,sii9022-tpi # Transmitter Programming Interface
+          - const: sil,sii9022
+      - const: sil,sii9022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line used to inform the host about hotplug events.
+
+  reset-gpios:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O Supply Voltage (1.8V or 3.3V)
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage (1.2V)
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+    description: |
+      <0> if only I2S or S/PDIF pin is wired,
+      <1> if both are wired.
+      HDMI audio is configured only if this property is found.
+      If HDMI audio is configured, the sii902x device becomes an I2S and/or
+      S/PDIF audio codec component (e.g. a digital audio sink), that can be
+      used in configuring full audio devices with simple-card or
+      audio-graph-card bindings. See their binding documents on how to describe
+      the way the
+      sii902x device is connected to the rest of the audio system:
+      Documentation/devicetree/bindings/sound/simple-card.yaml
+      Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+      Note: In case of the audio-graph-card binding the used port index should
+      be 3.
+
+  sil,i2s-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    description:
+      Each integer indicates which I2S pin is connected to which audio FIFO.
+      The first integer selects the I2S audio pin for the first audio FIFO#0
+      (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
+      on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
+      connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
+      mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
+      default value is <0>, describing SD0 pin being routed to HDMI audio
+      FIFO#0.
+
+  clocks:
+    maxItems: 1
+    description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
+
+  clock-names:
+    const: mclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-bridge@39 {
+            compatible = "sil,sii9022";
+            reg = <0x39>;
+            reset-gpios = <&pioA 1 0>;
+            iovcc-supply = <&v3v3_hdmi>;
+            cvcc12-supply = <&v1v2_hdmi>;
+
+            #sound-dai-cells = <0>;
+            sil,i2s-data-lanes = < 0 1 2 >;
+            clocks = <&mclk>;
+            clock-names = "mclk";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dc_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
index 9be44a682e67..4b7e54a8f037 100644
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -26,9 +26,7 @@ properties:
   reg-io-width:
     description:
       Width (in bytes) of the registers specified by the reg property.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4]
+    enum: [1, 4]
     default: 1
 
   clocks:
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
deleted file mode 100644
index f5a02f61dd36..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Device-Tree bindings for the NXP TDA998x HDMI transmitter
-
-Required properties;
-  - compatible: must be "nxp,tda998x"
-
-  - reg: I2C address
-
-Required node:
-  - port: Input port node with endpoint definition, as described
-        in Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - interrupts: interrupt number and trigger type
-	default: polling
-
-  - pinctrl-0: pin control group to be used for
-	screen plug/unplug interrupt.
-
-  - pinctrl-names: must contain a "default" entry.
-
-  - video-ports: 24 bits value which defines how the video controller
-	output is wired to the TDA998x input - default: <0x230145>
-
-  - audio-ports: array of 8-bit values, 2 values per one DAI[1].
-	The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
-	The second value defines the tda998x AP_ENA reg content when the DAI
-	in question is used. The implementation allows one or two DAIs. If two
-	DAIs are defined, they must be of different type.
-
-  - nxp,calib-gpios: calibration GPIO, which must correspond with the
-	gpio used for the TDA998x interrupt pin.
-
-[1] Documentation/sound/soc/dai.rst
-[2] include/dt-bindings/display/tda998x.h
-
-Example:
-
-#include <dt-bindings/display/tda998x.h>
-
-	tda998x: hdmi-encoder {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 2>;		/* falling edge */
-		pinctrl-0 = <&pmx_camera>;
-		pinctrl-names = "default";
-		video-ports = <0x230145>;
-
-		#sound-dai-cells = <2>;
-			     /*	DAI-format	AP_ENA reg value */
-		audio-ports = <	TDA998x_SPDIF	0x04
-				TDA998x_I2S	0x03>;
-
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
new file mode 100644
index 000000000000..542193d77cdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DLPC3433 MIPI DSI to DMD bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Christopher Vollo <chris@renewoutreach.org>
+
+description: |
+  TI DLPC3433 is a MIPI DSI based display controller bridge
+  for processing high resolution DMD based projectors.
+
+  It has a flexible configuration of MIPI DSI and DPI signal
+  input that produces a DMD output in RGB565, RGB666, RGB888
+  formats.
+
+  It supports upto 720p resolution with 60 and 120 Hz refresh
+  rates.
+
+properties:
+  compatible:
+    const: ti,dlpc3433
+
+  reg:
+    enum:
+      - 0x1b
+      - 0x1d
+
+  enable-gpios:
+    description: PROJ_ON pin, chip powers up PROJ_ON is high.
+
+  vcc_intf-supply:
+    description: A 1.8V/3.3V supply that power the Host I/O.
+
+  vcc_flsh-supply:
+    description: A 1.8V/3.3V supply that power the Flash I/O.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DMD output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@1b {
+            compatible = "ti,dlpc3433";
+            reg = <0x1b>;
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_in_dsi: endpoint {
+                        remote-endpoint = <&dsi_out_bridge>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_out_panel: endpoint {
+                        remote-endpoint = <&panel_out_bridge>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index b446d0f0f1b4..48a97bb3e2e0 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -32,6 +32,9 @@ properties:
     maxItems: 1
     description: GPIO specifier for bridge_en pin (active high).
 
+  vcc-supply:
+    description: A 1.8V power supply (see regulator/regulator.yaml).
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -91,7 +94,6 @@ properties:
 required:
   - compatible
   - reg
-  - enable-gpios
   - ports
 
 allOf:
@@ -133,6 +135,7 @@ examples:
             reg = <0x2d>;
 
             enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+            vcc-supply = <&reg_sn65dsi83_1v8>;
 
             ports {
                 #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index 5216c27fc0ad..a412a1da950f 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -39,7 +39,6 @@ properties:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index f1541cc05297..ed280053ec62 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -53,16 +53,32 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
             DSI input port. The remote endpoint phandle should be a
             reference to a valid DSI output endpoint node
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
-            DPI input port. The remote endpoint phandle should be a
-            reference to a valid DPI output endpoint node
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
 
       port@2:
         $ref: /schemas/graph.yaml#/properties/port
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
index eacfe7165083..0b6f5bef120f 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -58,6 +58,7 @@ properties:
 
             properties:
               data-lines:
+                $ref: /schemas/types.yaml#/definitions/uint32
                 enum: [ 16, 18, 24 ]
 
       port@1:
@@ -77,7 +78,10 @@ required:
   - vddio-supply
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -87,7 +91,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      dsi_bridge: dsi-bridge@e {
+      dsi_bridge: dsi@e {
         compatible = "toshiba,tc358768";
         reg = <0xe>;
 
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
deleted file mode 100644
index 0fba2ee6440a..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
-
-MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
-not capable to transfer high resoltuion frame data as decon can send. MIC
-solves this problem by compressing the frame data by 1/2 before it is
-transferred through mipi dsi. The compressed frame data must be uncompressed in
-the panel PCB.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-mic".
-- reg: physical base address and length of the MIC registers set and system
-       register of mic.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
-- samsung,disp-syscon: the reference node for syscon for DISP block.
-- ports: contains a port which is connected to decon node and dsi node.
-	 address-cells and size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the
-	decon node or dsi node. The reg value must be 0 and 1 respectively.
-
-Example:
-SoC specific DT entry:
-mic: mic@13930000 {
-	compatible = "samsung,exynos5433-mic";
-	reg = <0x13930000 0x48>;
-	clocks = <&cmu_disp CLK_PCLK_MIC0>,
-	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
-	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
-	samsung,disp-syscon = <&syscon_disp>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mic_to_decon: endpoint {
-				remote-endpoint = <&decon_to_mic>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mic_to_dsi: endpoint {
-				remote-endpoint = <&dsi_to_mic>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
deleted file mode 100644
index 775193e1c641..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of:
-	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
-- reg: physical base address and length of the DECON registers set.
-- interrupt-names: should contain the interrupt names depending on mode of work:
-		video mode: "vsync",
-		command mode: "lcd_sys",
-		command mode with software trigger: "lcd_sys", "te".
-- interrupts or interrupts-extended: list of interrupt specifiers corresponding
-		to names privided in interrupt-names, as described in
-		interrupt-controller/interrupts.txt
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
-	       "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
-	       "sclk_decon_eclk"
-- ports: contains a port which is connected to mic node. address-cells and
-	 size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the mic
-	node. The reg value muset be 0.
-
-Example:
-SoC specific DT entry:
-decon: decon@13800000 {
-	compatible = "samsung,exynos5433-decon";
-	reg = <0x13800000 0x2104>;
-	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON1X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_SCLK_DECON_VCLK>,
-		<&cmu_disp CLK_SCLK_DECON_ECLK>;
-	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
-		"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
-	interrupt-names = "vsync", "lcd_sys";
-	interrupts = <0 202 0>, <0 203 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			decon_to_mic: endpoint {
-				remote-endpoint = <&mic_to_decon>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
deleted file mode 100644
index 53912c99ec38..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos7 series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be "samsung,exynos7-decon";
-
-- reg: physical base address and length of the DECON registers set.
-
-- interrupts: should contain a list of all DECON IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "pclk_decon0", "aclk_decon0",
-	       "decon0_eclk", "decon0_vclk".
-- i80-if-timings: timing configuration for lcd i80 interface support.
-
-Optional Properties:
-- power-domains: a phandle to DECON power domain node.
-- display-timings: timing settings for DECON, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-Example:
-
-SoC specific DT entry:
-
-	decon@13930000 {
-		compatible = "samsung,exynos7-decon";
-		interrupt-parent = <&combiner>;
-		reg = <0x13930000 0x1000>;
-		interrupt-names = "lcd_sys", "vsync", "fifo";
-		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
-		clocks = <&clock_disp PCLK_DECON_INT>,
-			 <&clock_disp ACLK_DECON_INT>,
-			 <&clock_disp SCLK_DECON_INT_ECLK>,
-			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
-		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
-				"decon0_vclk";
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	decon@13930000 {
-		pinctrl-0 = <&lcd_clk &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
deleted file mode 100644
index 58b12e25bbb1..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device-Tree bindings for drm hdmi driver
-
-Required properties:
-- compatible: value should be one among the following:
-	1) "samsung,exynos4210-hdmi"
-	2) "samsung,exynos4212-hdmi"
-	3) "samsung,exynos5420-hdmi"
-	4) "samsung,exynos5433-hdmi"
-- reg: physical base address of the hdmi and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- hpd-gpios: following information about the hotplug gpio pin.
-	a) phandle of the gpio controller node.
-	b) pin number within the gpio controller.
-	c) optional flags and pull up/down.
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
-- #sound-dai-cells: should be 0.
-
-Required properties for Exynos 4210, 4212, 5420 and 5433:
-- clocks: list of clock IDs from SoC clock driver.
-	a) hdmi: Gate of HDMI IP bus clock.
-	b) sclk_hdmi: Gate of HDMI special clock.
-	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
-		HDMI clock mux.
-	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
-		HDMI clock mux.
-	e) mout_hdmi: It is required by the driver to switch between the 2
-		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
-		after configuration, parent is set to sclk_hdmiphy else
-		sclk_pixel.
-- clock-names: aliases as per driver requirements for above clock IDs:
-	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-
-Required properties for Exynos 5433:
-- clocks: list of clock specifiers according to common clock bindings.
-	a) hdmi_pclk: Gate of HDMI IP APB bus.
-	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
-	d) i_tmds_clk: Gate of HDMI TMDS clock.
-	e) i_pixel_clk: Gate of HDMI pixel clock.
-	f) i_spdif_clk: Gate of HDMI SPDIF clock.
-	g) oscclk: Oscillator clock, used as parent of following *_user clocks
-		in case HDMI-PHY is not operational.
-	h) tmds_clko: TMDS clock generated by HDMI-PHY.
-	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
-		respectively if HDMI-PHY is off and operational.
-	j) pixel_clko: Pixel clock generated by HDMI-PHY.
-	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
-		respectively if HDMI-PHY is off and operational.
-- clock-names: aliases for above clock specfiers.
-- samsung,sysreg: handle to syscon used to control the system registers.
-
-Example:
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x100000>;
-		interrupts = <0 95 0>;
-		hpd-gpios = <&gpx3 7 1>;
-		ddc = <&hdmi_ddc_node>;
-		phy = <&hdmi_phy_node>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
deleted file mode 100644
index 41eee971562b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiddc driver
-
-Required properties:
-- compatible: value should be one of the following
-	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiddc"
-
-- reg: I2C address of the hdmiddc device.
-
-Example:
-
-	hdmiddc {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
deleted file mode 100644
index 162f641f7639..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiphy driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiphy".
-	3) "samsung,exynos4212-hdmiphy".
-- reg: I2C address of the hdmiphy device.
-
-Example:
-
-	hdmiphy {
-		compatible = "samsung,exynos4210-hdmiphy";
-		reg = <0x38>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
deleted file mode 100644
index 3e38128f866b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-Tree bindings for mixer driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-mixer" <DEPRECATED>
-	2) "samsung,exynos4210-mixer"
-	3) "samsung,exynos4212-mixer"
-	4) "samsung,exynos5250-mixer"
-	5) "samsung,exynos5420-mixer"
-
-- reg: physical base address of the mixer and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- clocks: list of clock IDs from SoC clock driver.
-	a) mixer: Gate of Mixer IP bus clock.
-	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
-               mixer mux.
-	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
-
-Example:
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
deleted file mode 100644
index b3096421d42b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Device-Tree bindings for Samsung SoC display controller (FIMD)
-
-FIMD (Fully Interactive Mobile Display) is the Display Controller for the
-Samsung series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
-		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
-		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
-		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
-		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
-
-- reg: physical base address and length of the FIMD registers set.
-
-- interrupts: should contain a list of all FIMD IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "sclk_fimd" and "fimd".
-
-Optional Properties:
-- power-domains: a phandle to FIMD power domain node.
-- samsung,invert-vden: video enable signal is inverted
-- samsung,invert-vclk: video clock signal is inverted
-- display-timings: timing settings for FIMD, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-- samsung,sysreg: handle to syscon used to control the system registers
-- i80-if-timings: timing configuration for lcd i80 interface support.
-  - cs-setup: clock cycles for the active period of address signal is enabled
-              until chip select is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-setup: clock cycles for the active period of CS signal is enabled until
-              write signal is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-active: clock cycles for the active period of CS is enabled.
-               If not specified, the default value(1) will be used.
-  - wr-hold: clock cycles for the active period of CS is disabled until write
-             signal is disabled.
-             If not specified, the default value(0) will be used.
-
-  The parameters are defined as:
-
-    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
-                      :            :            :            :            :
-    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
-                      | cs-setup+1 |            :            :            :
-                      |<---------->|            :            :            :
-    Chip Select     ???????????????|____________:____________:____________|??
-                                   | wr-setup+1 |            | wr-hold+1  |
-                                   |<---------->|            |<---------->|
-    Write Enable    ????????????????????????????|____________|???????????????
-                                                | wr-active+1|
-                                                |<---------->|
-    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
-
-The device node can contain 'port' child nodes according to the bindings defined
-in [2]. The following are properties specific to those nodes:
-- reg: (required) port index, can be:
-		0 - for CAMIF0 input,
-		1 - for CAMIF1 input,
-		2 - for CAMIF2 input,
-		3 - for parallel output,
-		4 - for write-back interface
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-SoC specific DT entry:
-
-	fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 900a56cae80e..876015a44a1e 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -20,6 +20,7 @@ properties:
           - fsl,imx23-lcdif
           - fsl,imx28-lcdif
           - fsl,imx6sx-lcdif
+          - fsl,imx8mp-lcdif
       - items:
           - enum:
               - fsl,imx6sl-lcdif
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
index aecff34f505d..1f8f2182e2f1 100644
--- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ilitek ILI9486 display panels device tree bindings
+title: Ilitek ILI9486 display panels
 
 maintainers:
   - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
index 0091df9dd73b..989ab312c1f4 100644
--- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -105,4 +105,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
index 0049010b37ca..c0bb02fb49f4 100644
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -17,6 +17,8 @@ properties:
     enum:
       - ingenic,jz4740-lcd
       - ingenic,jz4725b-lcd
+      - ingenic,jz4760-lcd
+      - ingenic,jz4760b-lcd
       - ingenic,jz4770-lcd
       - ingenic,jz4780-lcd
 
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml
index 49460c9dceea..7cd2ce7e9c33 100644
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ b/Documentation/devicetree/bindings/display/lvds.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
+$id: http://devicetree.org/schemas/display/lvds.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LVDS Display Panel
+title: LVDS Display Common Properties
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
@@ -13,8 +13,8 @@ maintainers:
 description: |+
   LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
   incompatible data link layers have been used over time to transmit image data
-  to LVDS panels. This bindings supports display panels compatible with the
-  following specifications.
+  to LVDS devices. This bindings supports devices compatible with the following
+  specifications.
 
   [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
   1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
@@ -26,18 +26,7 @@ description: |+
   Device compatible with those specifications have been marketed under the
   FPD-Link and FlatLink brands.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
-  compatible:
-    contains:
-      const: panel-lvds
-    description:
-      Shall contain "panel-lvds" in addition to a mandatory panel-specific
-      compatible string defined in individual panel bindings. The "panel-lvds"
-      value shall never be used on its own.
-
   data-mapping:
     enum:
       - jeida-18
@@ -96,22 +85,6 @@ properties:
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
-  port: true
-  ports: true
-
-required:
-  - compatible
-  - data-mapping
-  - width-mm
-  - height-mm
-  - panel-timing
-
-oneOf:
-  - required:
-      - port
-  - required:
-      - ports
-
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
new file mode 100644
index 000000000000..d4d585485e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display adaptive ambient light processor, namely AAL,
+  is responsible for backlight power saving and sunlight visibility improving.
+  AAL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-aal
+          - mediatek,mt8183-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt2712-disp-aal
+          - const: mediatek,mt8173-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-aal
+              - mediatek,mt8192-disp-aal
+              - mediatek,mt8195-disp-aal
+          - const: mediatek,mt8183-disp-aal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: AAL Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aal@14015000 {
+           compatible = "mediatek,mt8173-disp-aal";
+           reg = <0 0x14015000 0 0x1000>;
+           interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+           clocks = <&mmsys CLK_MM_DISP_AAL>;
+           mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..63fb02014a56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color correction, namely CCORR, reproduces correct color
+  on panels with different color gamut.
+  CCORR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-ccorr
+      - items:
+          - const: mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8195-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ccorr
+          - const: mediatek,mt8183-disp-ccorr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: CCORR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ccorr0: ccorr@1400f000 {
+            compatible = "mediatek,mt8183-disp-ccorr";
+            reg = <0 0x1400f000 0 0x1000>;
+            interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
new file mode 100644
index 000000000000..d2f89ee7996f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color processor, namely COLOR, provides hue, luma and
+  saturation adjustments to get better picture quality and to have one panel
+  resemble the other in their output characteristics.
+  COLOR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - const: mediatek,mt8167-disp-color
+      - items:
+          - const: mediatek,mt8173-disp-color
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-color
+              - mediatek,mt2712-disp-color
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - enum:
+              - mediatek,mt8183-disp-color
+              - mediatek,mt8186-disp-color
+              - mediatek,mt8192-disp-color
+              - mediatek,mt8195-disp-color
+          - const: mediatek,mt8173-disp-color
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: COLOR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        color0: color@14013000 {
+            compatible = "mediatek,mt8173-disp-color";
+            reg = <0 0x14013000 0 0x1000>;
+            interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
deleted file mode 100644
index 78044c340e20..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ /dev/null
@@ -1,219 +0,0 @@
-Mediatek display subsystem
-==========================
-
-The Mediatek display subsystem consists of various DISP function blocks in the
-MMSYS register space. The connections between them can be configured by output
-and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
-of frame signal are distributed to the other function blocks by a DISP_MUTEX
-function block.
-
-All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
-For a description of the MMSYS_CONFIG binding, see
-Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml.
-
-DISP function blocks
-====================
-
-A display stream starts at a source function block that reads pixel data from
-memory and ends with a sink function block that drives pixels on a display
-interface, or writes pixels back to memory. All DISP function blocks have
-their own register space, interrupt, and clock gate. The blocks that can
-access memory additionally have to list the IOMMU and local arbiter they are
-connected to.
-
-For a description of the display interface sink function blocks, see
-Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
-Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml.
-
-Required properties (all function blocks):
-- compatible: "mediatek,<chip>-disp-<function>", one of
-	"mediatek,<chip>-disp-ovl"   		- overlay (4 layers, blending, csc)
-	"mediatek,<chip>-disp-ovl-2l"           - overlay (2 layers, blending, csc)
-	"mediatek,<chip>-disp-rdma"  		- read DMA / line buffer
-	"mediatek,<chip>-disp-wdma"  		- write DMA
-	"mediatek,<chip>-disp-ccorr"            - color correction
-	"mediatek,<chip>-disp-color" 		- color processor
-	"mediatek,<chip>-disp-dither"           - dither
-	"mediatek,<chip>-disp-aal"   		- adaptive ambient light controller
-	"mediatek,<chip>-disp-gamma" 		- gamma correction
-	"mediatek,<chip>-disp-merge" 		- merge streams from two RDMA sources
-	"mediatek,<chip>-disp-postmask" 	- control round corner for display frame
-	"mediatek,<chip>-disp-split" 		- split stream to two encoders
-	"mediatek,<chip>-disp-ufoe"  		- data compression engine
-	"mediatek,<chip>-dsi"        		- DSI controller, see mediatek,dsi.txt
-	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
-	"mediatek,<chip>-disp-mutex" 		- display mutex
-	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192.
-- reg: Physical base address and length of the function block register space
-- interrupts: The interrupt signal from the function block (required, except for
-  merge and split function blocks).
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-  For most function blocks this is just a single clock input. Only the DSI and
-  DPI controller nodes have multiple clock inputs. These are documented in
-  mediatek,dsi.txt and mediatek,dpi.txt, respectively.
-  An exception is that the mt8183 mutex is always free running with no clocks property.
-
-Required properties (DMA function blocks):
-- compatible: Should be one of
-	"mediatek,<chip>-disp-ovl"
-	"mediatek,<chip>-disp-rdma"
-	"mediatek,<chip>-disp-wdma"
-  the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-- iommus: Should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Optional properties (RDMA function blocks):
-- mediatek,rdma-fifo-size: rdma fifo size may be different even in same SOC, add this
-  property to the corresponding rdma
-  the value is the Max value which defined in hardware data sheet.
-  mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
-  mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
-  mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
-
-Examples:
-
-mmsys: clock-controller@14000000 {
-	compatible = "mediatek,mt8173-mmsys", "syscon";
-	reg = <0 0x14000000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	#clock-cells = <1>;
-};
-
-ovl0: ovl@1400c000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400c000 0 0x1000>;
-	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL0>;
-	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
-};
-
-ovl1: ovl@1400d000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400d000 0 0x1000>;
-	interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL1>;
-	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma0: rdma@1400e000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400e000 0 0x1000>;
-	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
-	mediatek,rdma-fifosize = <8192>;
-};
-
-rdma1: rdma@1400f000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400f000 0 0x1000>;
-	interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma2: rdma@14010000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x14010000 0 0x1000>;
-	interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
-};
-
-wdma0: wdma@14011000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14011000 0 0x1000>;
-	interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
-};
-
-wdma1: wdma@14012000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14012000 0 0x1000>;
-	interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-color0: color@14013000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14013000 0 0x1000>;
-	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR0>;
-};
-
-color1: color@14014000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14014000 0 0x1000>;
-	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR1>;
-};
-
-aal@14015000 {
-	compatible = "mediatek,mt8173-disp-aal";
-	reg = <0 0x14015000 0 0x1000>;
-	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_AAL>;
-};
-
-gamma@14016000 {
-	compatible = "mediatek,mt8173-disp-gamma";
-	reg = <0 0x14016000 0 0x1000>;
-	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_GAMMA>;
-};
-
-ufoe@1401a000 {
-	compatible = "mediatek,mt8173-disp-ufoe";
-	reg = <0 0x1401a000 0 0x1000>;
-	interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_UFOE>;
-};
-
-dsi0: dsi@1401b000 {
-	/* See mediatek,dsi.txt for details */
-};
-
-dpi0: dpi@1401d000 {
-	/* See mediatek,dpi.txt for details */
-};
-
-mutex: mutex@14020000 {
-	compatible = "mediatek,mt8173-disp-mutex";
-	reg = <0 0x14020000 0 0x1000>;
-	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_MUTEX_32K>;
-};
-
-od@14023000 {
-	compatible = "mediatek,mt8173-disp-od";
-	reg = <0 0x14023000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OD>;
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
new file mode 100644
index 000000000000..8ad8187c02d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display dither processor, namely DITHER, works by approximating
+  unavailable colors with available colors and by mixing and matching available
+  colors to mimic unavailable ones.
+  DITHER device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-dither
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-dither
+              - mediatek,mt8192-disp-dither
+              - mediatek,mt8195-disp-dither
+          - const: mediatek,mt8183-disp-dither
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: DITHER Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dither0: dither@14012000 {
+            compatible = "mediatek,mt8183-disp-dither";
+            reg = <0 0x14012000 0 0x1000>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 000000000000..ff781f2174a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  MediaTek DP and eDP are different hardwares and there are some features
+  which are not supported for eDP. For example, audio is not supported for
+  eDP. Therefore, we need to use two different compatibles to describe them.
+  In addition, We just need to enable the power domain of DP, so the clock
+  of DP is generated by itself and we are not using other PLL to generate
+  clocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-dp-tx
+      - mediatek,mt8195-edp-tx
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: efuse data for display port calibration
+
+  nvmem-cell-names:
+    const: dp_calibration_data
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller, usually dp_intf
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                description: |
+                  number of lanes supported by the hardware.
+                  The possible values:
+                  0       - For 1 lane enabled in IP.
+                  0 1     - For 2 lanes enabled in IP.
+                  0 1 2 3 - For 4 lanes enabled in IP.
+                minItems: 1
+                maxItems: 4
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+  max-linkrate-mhz:
+    enum: [ 1620, 2700, 5400, 8100 ]
+    description: maximum link rate supported by the hardware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+  - max-linkrate-mhz
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    dptx@1c600000 {
+        compatible = "mediatek,mt8195-dp-tx";
+        reg = <0x1c600000 0x8000>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+        max-linkrate-mhz = <8100>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dptx_in: endpoint {
+                    remote-endpoint = <&dp_intf0_out>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                dptx_out: endpoint {
+                    data-lanes = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..5bb23e97cf33 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: MediaTek DPI and DP_INTF Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
   - Jitao shi <jitao.shi@mediatek.com>
 
 description: |
-  The Mediatek DPI function block is a sink of the display subsystem and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  The MediaTek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
 
 properties:
   compatible:
@@ -22,7 +22,9 @@ properties:
       - mediatek,mt7623-dpi
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
+      - mediatek,mt8186-dpi
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dp-intf
 
   reg:
     maxItems: 1
@@ -54,7 +56,7 @@ properties:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       Output port node. This port should be connected to the input port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
 
 required:
   - compatible
@@ -70,8 +72,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/mt8173-clk.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
+
     dpi0: dpi@1401d000 {
         compatible = "mediatek,mt8173-dpi";
         reg = <0x1401d000 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
new file mode 100644
index 000000000000..49248864514b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mediatek display DSC controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The DSC standard is a specification of the algorithms used for
+  compressing and decompressing image display streams, including
+  the specification of the syntax and semantics of the compressed
+  video bit stream. DSC is designed for real-time systems with
+  real-time compression, transmission, decompression and Display.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8195-disp-dsc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DSC Wrapper Clock
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsc0: disp_dsc_wrap@1c009000 {
+            compatible = "mediatek,mt8195-disp-dsc";
+            reg = <0 0x1c009000 0 0x1000>;
+            interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+            clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+            mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
deleted file mode 100644
index 36b01458f45c..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Mediatek DSI Device
-===================
-
-The Mediatek DSI function block is a sink of the display subsystem and can
-drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
-channel output.
-
-Required properties:
-- compatible: "mediatek,<chip>-dsi"
-- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "engine", "digital", and "hs"
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy"
-- port: Output port node with endpoint definitions as described in
-  Documentation/devicetree/bindings/graph.txt. This port should be connected
-  to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
-
-Optional properties:
-- resets: list of phandle + reset specifier pair, as described in [1].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-
-MIPI TX Configuration Module
-============================
-
-See phy/mediatek,dsi-phy.yaml
-
-Example:
-
-mipi_tx0: mipi-dphy@10215000 {
-	compatible = "mediatek,mt8173-mipi-tx";
-	reg = <0 0x10215000 0 0x1000>;
-	clocks = <&clk26m>;
-	clock-output-names = "mipi_tx0_pll";
-	#clock-cells = <0>;
-	#phy-cells = <0>;
-	drive-strength-microamp = <4600>;
-	nvmem-cells= <&mipi_tx_calibration>;
-	nvmem-cell-names = "calibration-data";
-};
-
-dsi0: dsi@1401b000 {
-	compatible = "mediatek,mt8173-dsi";
-	reg = <0 0x1401b000 0 0x1000>;
-	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
-		 <&mipi_tx0>;
-	clock-names = "engine", "digital", "hs";
-	resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
-	phys = <&mipi_tx0>;
-	phy-names = "dphy";
-
-	port {
-		dsi0_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
new file mode 100644
index 000000000000..b18d6a57c6e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller Device Tree Bindings
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+description: |
+  The MediaTek DSI function block is a sink of the display subsystem and can
+  drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+  channel output.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-dsi
+      - mediatek,mt7623-dsi
+      - mediatek,mt8167-dsi
+      - mediatek,mt8173-dsi
+      - mediatek,mt8183-dsi
+      - mediatek,mt8186-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Engine Clock
+      - description: Digital Clock
+      - description: HS Clock
+
+  clock-names:
+    items:
+      - const: engine
+      - const: digital
+      - const: hs
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input
+      port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/mt8183-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi0: dsi@14014000 {
+            compatible = "mediatek,mt8183-dsi";
+            reg = <0 0x14014000 0 0x1000>;
+            interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DSI0_MM>,
+                <&mmsys CLK_MM_DSI0_IF>,
+                <&mipi_tx0>;
+            clock-names = "engine", "digital", "hs";
+            resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+            phys = <&mipi_tx0>;
+            phy-names = "dphy";
+            port {
+                dsi0_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
new file mode 100644
index 000000000000..a89ea0ea7542
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+  operation used to adjust luminance in display system.
+  GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-gamma
+      - items:
+          - const: mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-gamma
+              - mediatek,mt8192-disp-gamma
+              - mediatek,mt8195-disp-gamma
+          - const: mediatek,mt8183-disp-gamma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: GAMMA Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gamma@14016000 {
+            compatible = "mediatek,mt8173-disp-gamma";
+            reg = <0 0x14016000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index 111967efa999..bdaf0b51e68c 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -51,7 +51,10 @@ properties:
 
   mediatek,syscon-hdmi:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to system configuration registers
+          - description: register offset in the system configuration registers
     description: |
       phandle link and register offset to the system configuration registers.
 
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 000000000000..dd12e2ff685c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MDP RDMA
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  The MediaTek MDP RDMA stands for Read Direct Memory Access.
+  It provides real time data to the back-end panel driver, such as DSI,
+  DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-vdo1-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - iommus
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma@1c104000 {
+            compatible = "mediatek,mt8195-vdo1-rdma";
+            reg = <0 0x1c104000 0 0x1000>;
+            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
new file mode 100644
index 000000000000..69ba75777dac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+  inputs into one side-by-side output.
+  MERGE device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8195-disp-merge
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: merge
+      - items:
+          - const: merge
+          - const: merge_async
+
+  mediatek,merge-fifo-en:
+    description:
+      The setting of merge fifo is mainly provided for the display latency
+      buffer to ensure that the back-end panel display data will not be
+      underrun, a little more data is needed in the fifo.
+      According to the merge fifo settings, when the water level is detected
+      to be insufficient, it will trigger RDMA sending ultra and preulra
+      command to SMI to speed up the data rate.
+    type: boolean
+
+  mediatek,merge-mute:
+    description: Support mute function. Mute the content of merge output.
+    type: boolean
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  resets:
+    description: reset controller
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        merge@14017000 {
+            compatible = "mediatek,mt8173-disp-merge";
+            reg = <0 0x14017000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_MERGE>;
+            clock-names = "merge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
new file mode 100644
index 000000000000..853fcb9db2be
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overdirve
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overdrive, namely OD, increases the transition values
+  of pixels between consecutive frames to make LCD rotate faster.
+  OD device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2712-disp-od
+      - items:
+          - const: mediatek,mt8173-disp-od
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: OD Clock
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        od@14023000 {
+            compatible = "mediatek,mt8173-disp-od";
+            reg = <0 0x14023000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_DISP_OD>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
new file mode 100644
index 000000000000..4e94f4e947ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+  for OVL.
+  OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8183-disp-ovl-2l
+      - items:
+          - const: mediatek,mt8192-disp-ovl-2l
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl-2l
+          - const: mediatek,mt8192-disp-ovl-2l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL-2L Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl_2l0: ovl@14009000 {
+            compatible = "mediatek,mt8183-disp-ovl-2l";
+            reg = <0 0x14009000 0 0x1000>;
+            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+            iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
new file mode 100644
index 000000000000..a2a27d0ca038
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay, namely OVL, can do alpha blending from
+  the memory.
+  OVL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - const: mediatek,mt8173-disp-ovl
+      - items:
+          - const: mediatek,mt8183-disp-ovl
+      - items:
+          - const: mediatek,mt8192-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-ovl
+              - mediatek,mt2712-disp-ovl
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8195-disp-ovl
+          - const: mediatek,mt8183-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl
+          - const: mediatek,mt8192-disp-ovl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl0: ovl@1400c000 {
+            compatible = "mediatek,mt8173-disp-ovl";
+            reg = <0 0x1400c000 0 0x1000>;
+            interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0>;
+            iommus = <&iommu M4U_PORT_DISP_OVL0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
new file mode 100644
index 000000000000..654080bfbdfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display postmask
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display postmask, namely POSTMASK, provides round corner pattern
+  generation.
+  POSTMASK device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8192-disp-postmask
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-postmask
+          - const: mediatek,mt8192-disp-postmask
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: POSTMASK Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/gce/mt8192-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        postmask0: postmask@1400d000 {
+            compatible = "mediatek,mt8192-disp-postmask";
+            reg = <0 0x1400d000 0 0x1000>;
+            interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
new file mode 100644
index 000000000000..0882ae86e6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Read Direct Memory Access(RDMA) component used to read the
+  data into DMA. It provides real time data to the back-end panel
+  driver, such as DSI, DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - const: mediatek,mt8173-disp-rdma
+      - items:
+          - const: mediatek,mt8183-disp-rdma
+      - items:
+          - const: mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-rdma
+              - mediatek,mt2712-disp-rdma
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-rdma
+              - mediatek,mt8192-disp-rdma
+          - const: mediatek,mt8183-disp-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,rdma-fifo-size:
+    description:
+      rdma fifo size may be different even in same SOC, add this property to the
+      corresponding rdma.
+      The value below is the Max value which defined in hardware data sheet
+      mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+      mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+      mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8192, 5120, 2048]
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma0: rdma@1400e000 {
+            compatible = "mediatek,mt8173-disp-rdma";
+            reg = <0 0x1400e000 0 0x1000>;
+            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+            mediatek,rdma-fifo-size = <8192>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
new file mode 100644
index 000000000000..35ace1f322e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display split
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display split, namely SPLIT, is used to split stream to two
+  encoders.
+  SPLIT device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-split
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: SPLIT Clock
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        split0: split@14018000 {
+            compatible = "mediatek,mt8173-disp-split";
+            reg = <0 0x14018000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
new file mode 100644
index 000000000000..b8bb135fe96b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display UFOe
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display UFOe stands for Unified Frame Optimization engine.
+  UFOe can cut the data rate for DSI port which may lead to reduce power
+  consumption.
+  UFOe device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-ufoe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: UFOe Clock
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufoe@1401a000 {
+            compatible = "mediatek,mt8173-disp-ufoe";
+            reg = <0 0x1401a000 0 0x1000>;
+            interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_UFOE>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..7d7cc1ab526b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+  WDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: mediatek,mt8173-disp-wdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: WDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdma0: wdma@14011000 {
+            compatible = "mediatek,mt8173-disp-wdma";
+            reg = <0 0x14011000 0 0x1000>;
+            interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 5457612ab136..f2515af8256f 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: MSM Display Port Controller
 
 maintainers:
-  - Kuogee Hsieh <khsieh@codeaurora.org>
+  - Kuogee Hsieh <quic_khsieh@quicinc.com>
 
 description: |
   Device tree bindings for DisplayPort host controller for MSM targets
@@ -21,8 +21,10 @@ properties:
       - qcom,sc7280-edp
       - qcom,sc8180x-dp
       - qcom,sc8180x-edp
+      - qcom,sm8350-dp
 
   reg:
+    minItems: 4
     items:
       - description: ahb register block
       - description: aux register block
@@ -69,12 +71,29 @@ properties:
   operating-points-v2:
     maxItems: 1
 
+  opp-table: true
+
   power-domains:
     maxItems: 1
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 3
+
   "#sound-dai-cells":
     const: 0
 
+  vdda-0p9-supply:
+    deprecated: true
+  vdda-1p2-supply:
+    deprecated: true
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
@@ -94,10 +113,33 @@ required:
   - clock-names
   - phys
   - phy-names
-  - "#sound-dai-cells"
   - power-domains
   - ports
 
+allOf:
+  # AUX BUS does not exist on DP controllers
+  # Audio output also is present only on DP output
+  # p1 regions is present on DP, but not on eDP
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-edp
+              - qcom,sc8180x-edp
+    then:
+      properties:
+        "#sound-dai-cells": false
+        reg:
+          maxItems: 4
+    else:
+      properties:
+        aux-bus: false
+        reg:
+          minItems: 5
+      required:
+        - "#sound-dai-cells"
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
new file mode 100644
index 000000000000..253665c693e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for MSM8998 target
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS and DPU are mentioned for MSM8998 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,msm8998-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for regdma register set
+          - description: Address offset and size for vbif register set
+          - description: Address offset and size for non-realtime vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: regdma
+          - const: vbif
+          - const: vbif_nrt
+
+      clocks:
+        items:
+          - description: Display ahb clock
+          - description: Display axi clock
+          - description: Display mem-noc clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: iface
+          - const: bus
+          - const: mnoc
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+          port@1:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF2 (DSI2)
+
+        required:
+          - port@0
+          - port@1
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+
+        display-controller@c901000 {
+            compatible = "qcom,msm8998-dpu";
+            reg = <0x0c901000 0x8f000>,
+                  <0x0c9a8e00 0xf0>,
+                  <0x0c9b0000 0x2008>,
+                  <0x0c9b8000 0x1040>;
+            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>,
+                     <&mmcc MNOC_AHB_CLK>,
+                     <&mmcc MDSS_MDP_CLK>,
+                     <&mmcc MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDMX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
new file mode 100644
index 000000000000..c5824e1d2382
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU dt properties for QCM2290 target
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  and DPU are mentioned for QCM2290 target.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,qcm2290-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path specifying the port ids for data bus
+
+  interconnect-names:
+    const: mdp0-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,qcm2290-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display AXI clock from gcc
+          - description: Display AHB clock from dispcc
+          - description: Display core clock from dispcc
+          - description: Display lut clock from dispcc
+          - description: Display vsync clock from dispcc
+
+      clock-names:
+        items:
+          - const: bus
+          - const: iface
+          - const: core
+          - const: lut
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        properties:
+          port@0:
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU_INTF1 (DSI1)
+
+        required:
+          - port@0
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: mdss@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        mdss_mdp: display-controller@5e01000 {
+                compatible = "qcom,qcm2290-dpu";
+                reg = <0x05e01000 0x8f000>,
+                      <0x05eb0000 0x2008>;
+                reg-names = "mdp", "vbif";
+
+                clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                         <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                         <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                         <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                         <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+                clock-names = "bus", "iface", "core", "lut", "vsync";
+
+                operating-points-v2 = <&mdp_opp_table>;
+                power-domains = <&rpmpd QCM2290_VDDCX>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <0>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                dpu_intf1_out: endpoint {
+                                        remote-endpoint = <&dsi0_in>;
+                                };
+                        };
+                };
+         };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
index 12a86b1ec1bc..4890bc25f3fd 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SC7180 target
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
@@ -65,10 +65,15 @@ properties:
   interconnect-names:
     const: mdp0-mem
 
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
     description: Node containing the properties of DPU.
+    additionalProperties: false
 
     properties:
       compatible:
@@ -110,6 +115,8 @@ patternProperties:
         maxItems: 1
 
       operating-points-v2: true
+      opp-table:
+        type: object
 
       ports:
         $ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
index fbeb931a026e..584d646021d5 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SC7280
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
@@ -64,10 +64,15 @@ properties:
   interconnect-names:
     const: mdp0-mem
 
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
     description: Node containing the properties of DPU.
+    additionalProperties: false
 
     properties:
       compatible:
@@ -108,6 +113,8 @@ patternProperties:
         maxItems: 1
 
       operating-points-v2: true
+      opp-table:
+        type: object
 
       ports:
         $ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
index b4ea7c92fb3d..7d1037373175 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DPU dt properties for SDM845 target
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
@@ -31,13 +31,11 @@ properties:
   clocks:
     items:
       - description: Display AHB clock from gcc
-      - description: Display AXI clock
       - description: Display core clock
 
   clock-names:
     items:
       - const: iface
-      - const: bus
       - const: core
 
   interrupts:
@@ -59,10 +57,15 @@ properties:
 
   ranges: true
 
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
     description: Node containing the properties of DPU.
+    additionalProperties: false
 
     properties:
       compatible:
@@ -100,6 +103,9 @@ patternProperties:
         maxItems: 1
 
       operating-points-v2: true
+      opp-table:
+        type: object
+
       ports:
         $ref: /schemas/graph.yaml#/properties/ports
         description: |
@@ -160,9 +166,8 @@ examples:
           power-domains = <&dispcc MDSS_GDSC>;
 
           clocks = <&gcc GCC_DISP_AHB_CLK>,
-                   <&gcc GCC_DISP_AXI_CLK>,
                    <&dispcc DISP_CC_MDSS_MDP_CLK>;
-          clock-names = "iface", "bus", "core";
+          clock-names = "iface", "core";
 
           interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
           interrupt-controller;
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 35426fde8610..3b609c19e0bc 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -7,15 +7,16 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI controller
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: "../dsi-controller.yaml#"
 
 properties:
   compatible:
-    items:
-      - const: qcom,mdss-dsi-ctrl
+    enum:
+      - qcom,mdss-dsi-ctrl
+      - qcom,dsi-ctrl-6g-qcm2290
 
   reg:
     maxItems: 1
@@ -65,13 +66,11 @@ properties:
       2 DSI links.
 
   assigned-clocks:
-    minItems: 2
     maxItems: 2
     description: |
       Parents of "byte" and "pixel" for the given platform.
 
   assigned-clock-parents:
-    minItems: 2
     maxItems: 2
     description: |
       The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 4399715953e1..d9ad8b659f58 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 10nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -35,6 +35,36 @@ properties:
       Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
       connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
 
+  qcom,phy-rescode-offset-top:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-up legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in an increasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-rescode-offset-bot:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-down legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in a decreasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-drive-ldo-level:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      The PHY LDO has an amplitude tuning feature to adjust the LDO output
+      for the HSTX drive. Use supported levels (mV) to offset the drive level
+      from the default value.
+    enum: [ 375, 400, 425, 450, 475, 500 ]
+
 required:
   - compatible
   - reg
@@ -64,5 +94,9 @@ examples:
          clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
                   <&rpmhcc RPMH_CXO_CLK>;
          clock-names = "iface", "ref";
+
+         qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-drive-ldo-level = <400>;
      };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 81dbee4803c0..1342d74ecfe0 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 14nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
index b8de785ce815..9c1f9140c731 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 20nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..3d8540a06fe2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 28nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
index 502bdda90235..76d40f7933dd 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Description of Qualcomm Display DSI PHY common dt properties
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 description: |
   This defines the DSI PHY dt properties which are common for all
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index fe55611d2603..67fdeeabae0c 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -20,35 +20,24 @@ description: |
 properties:
   compatible:
     items:
-      - enum:
-          - qcom,adreno-gmu-630.2
+      - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
       - const: qcom,adreno-gmu
 
   reg:
-    items:
-      - description: Core GMU registers
-      - description: GMU PDC registers
-      - description: GMU PDC sequence registers
+    minItems: 3
+    maxItems: 4
 
   reg-names:
-    items:
-      - const: gmu
-      - const: gmu_pdc
-      - const: gmu_pdc_seq
+    minItems: 3
+    maxItems: 4
 
   clocks:
-    items:
-      - description: GMU clock
-      - description: GPU CX clock
-      - description: GPU AXI clock
-      - description: GPU MEMNOC clock
+    minItems: 4
+    maxItems: 7
 
   clock-names:
-    items:
-      - const: gmu
-      - const: cxo
-      - const: axi
-      - const: memnoc
+    minItems: 4
+    maxItems: 7
 
   interrupts:
     items:
@@ -76,6 +65,9 @@ properties:
 
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
 required:
   - compatible
   - reg
@@ -91,6 +83,140 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-618.0
+              - qcom,adreno-gmu-630.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-635.0
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GPU AHB clock
+            - description: GPU HUB CX clock
+            - description: GPU SMMU vote clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: ahb
+            - const: hub
+            - const: smmu_vote
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 99a1ba3ada56..ec4b1a75f46a 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -58,12 +58,15 @@ properties:
       - const: ocmem
 
   iommus:
-    maxItems: 1
+    minItems: 1
+    maxItems: 64
 
   sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 4
+    items:
+      maxItems: 1
     description: |
       phandles to one or more reserved on-chip SRAM regions.
       phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
@@ -79,6 +82,7 @@ properties:
 
   zap-shader:
     type: object
+    additionalProperties: false
     description: |
       For a5xx and a6xx devices this node contains a memory-region that
       points to reserved memory to store the zap shader that can be used to
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
-   * "qcom,hdmi-tx-8996"
-   * "qcom,hdmi-tx-8994"
-   * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8974"
-   * "qcom,hdmi-tx-8660"
-   * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,hdmi-phy-8660"
-  * "qcom,hdmi-phy-8960"
-  * "qcom,hdmi-phy-8974"
-  * "qcom,hdmi-phy-8084"
-  * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
-  * "hdmi_phy"
-  * "hdmi_pll"
-  For HDMI PHY on msm8996, these additional register regions are required:
-    * "hdmi_tx_l0"
-    * "hdmi_tx_l1"
-    * "hdmi_tx_l3"
-    * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		compatible = "qcom,hdmi-tx-8960";
-		reg-names = "core_physical";
-		reg = <0x04a00000 0x2f0>;
-		interrupts = <GIC_SPI 79 0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-		    "core",
-		    "master_iface",
-		    "slave_iface";
-		clocks =
-		    <&mmcc HDMI_APP_CLK>,
-		    <&mmcc HDMI_M_AHB_CLK>,
-		    <&mmcc HDMI_S_AHB_CLK>;
-		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-		hdmi-mux-supply = <&ext_3p3v>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
-		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi_phy";
-	};
-
-	hdmi_phy: phy@4a00400 {
-		compatible = "qcom,hdmi-phy-8960";
-		reg-names = "hdmi_phy",
-			    "hdmi_pll";
-		reg = <0x4a00400 0x60>,
-		      <0x4a00500 0x100>;
-		#phy-cells = <0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface";
-		clocks = <&mmcc HDMI_S_AHB_CLK>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 000000000000..47e97669821c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+    deprecated: true
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+    deprecated: true
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  qcom,hdmi-tx-mux-en-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux enable pin
+
+  qcom,hdmi-tx-mux-sel-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux select pin
+
+  qcom,hdmi-tx-mux-lpm-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux lpm pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt
deleted file mode 100644
index b07eeb38f709..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp4.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Qualcomm adreno/snapdragon MDP4 display controller
-
-Description:
-
-This is the bindings documentation for the MDP4 display controller found in
-SoCs like MSM8960, APQ8064 and MSM8660.
-
-Required properties:
-- compatible:
-  * "qcom,mdp4" - mdp4
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "core_clk"
-  * "iface_clk"
-  * "bus_clk"
-  * "lut_clk"
-  * "hdmi_clk"
-  * "tv_clk"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The output port mappings are:
-	Port 0 -> LCDC/LVDS
-	Port 1 -> DSI1 Cmd/Video
-	Port 2 -> DSI2 Cmd/Video
-	Port 3 -> DTV
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut_clk"
-- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
-  used for LCDC. This is only valid for 18bpp panels.
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		...
-		ports {
-			...
-			port@0 {
-				reg = <0>;
-				hdmi_in: endpoint {
-					remote-endpoint = <&mdp_dtv_out>;
-				};
-			};
-			...
-		};
-		...
-	};
-
-	...
-
-	mdp: mdp@5100000 {
-		compatible = "qcom,mdp4";
-		reg = <0x05100000 0xf0000>;
-		interrupts = <GIC_SPI 75 0>;
-		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "lut_clk",
-		    "hdmi_clk",
-		    "tv_clk";
-		clocks =
-		    <&mmcc MDP_CLK>,
-		    <&mmcc MDP_AHB_CLK>,
-		    <&mmcc MDP_AXI_CLK>,
-		    <&mmcc MDP_LUT_CLK>,
-		    <&mmcc HDMI_TV_CLK>,
-		    <&mmcc MDP_TV_CLK>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
new file mode 100644
index 000000000000..58c13f5277b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+  MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    const: qcom,mdp4
+
+  clocks:
+    minItems: 6
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: iface_clk
+      - const: bus_clk
+      - const: lut_clk
+      - const: hdmi_clk
+      - const: tv_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LCDC/LVDS
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI1 Cmd / Video
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI2 Cmd / Video
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Digital TV
+
+  qcom,lcdc-align-lsb:
+    type: boolean
+    description: >
+      Indication that LSB alignment should be used for LCDC.
+      This is only valid for 18bpp panels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mdp: mdp@5100000 {
+        compatible = "qcom,mdp4";
+        reg = <0x05100000 0xf0000>;
+        interrupts = <0 75 0>;
+        clock-names =
+            "core_clk",
+            "iface_clk",
+            "bus_clk",
+            "lut_clk",
+            "hdmi_clk",
+            "tv_clk";
+        clocks =
+            <&mmcc 77>,
+            <&mmcc 86>,
+            <&mmcc 102>,
+            <&mmcc 75>,
+            <&mmcc 97>,
+            <&mmcc 12>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mdp_lvds_out: endpoint {
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mdp_dsi1_out: endpoint {
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                mdp_dsi2_out: endpoint {
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                mdp_dtv_out: endpoint {
+                    remote-endpoint = <&hdmi_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
index a108029ecfab..acd2f3faa6b9 100644
--- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
index 93878c2cd370..3a8c2c11f9bd 100644
--- a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: advantech,idk-1110wr
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-24
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 000000000000..4ad484f09ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,rtsm-display
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
index be69e0cc50fc..c9958f824d9a 100644
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -37,9 +37,6 @@ examples:
         compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
         reg = <0x00000 0x1000>;
 
-        #address-cells = <1>;
-        #size-cells = <0>;
-
         panel {
             compatible = "arm,versatile-tft-panel";
 
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index 56903ded005e..6d30575819d3 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -31,8 +31,7 @@ properties:
 patternProperties:
   "^timing":
     type: object
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 000000000000..80deedc01c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+  - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+  of 1080x2246. It is a video mode DSI panel. The backlight is managed
+  through the QCOM WLED driver.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ebbg,ft8719
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel of the peripheral
+
+  vddio-supply:
+    description: power IC supply regulator
+
+  vddpos-supply:
+    description: positive boost supply regulator
+
+  vddneg-supply:
+    description: negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "ebbg,ft8719";
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+        vddpos-supply = <&lab>;
+        vddneg-supply = <&ibb>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+        backlight = <&pmi8998_wled>;
+
+        port {
+          ebbg_ft8719_in_0: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..1cf84c8dd85e 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -35,7 +35,6 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
index e89c1ea62ffa..7d221ef35443 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -15,11 +15,9 @@ description: |
   960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
   VCOMH outputs.
 
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
index 20ce88ab4b3a..99e0cb9440cf 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -21,8 +21,10 @@ properties:
   compatible:
     items:
       - enum:
+          - adafruit,yx240qv29
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
       - const: ilitek,ili9341
 
   reg: true
@@ -47,32 +49,50 @@ properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
-  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         panel: display@0 {
-                 compatible = "st,sf-tc240t-9370-t",
-                              "ilitek,ili9341";
-                 reg = <0>;
-                 spi-3wire;
-                 spi-max-frequency = <10000000>;
-                 dc-gpios = <&gpiod 13 0>;
-                 port {
-                         panel_in: endpoint {
-                           remote-endpoint = <&display_out>;
-                      };
-                 };
-             };
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
         };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
+    };
 ...
-
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
index a69681e724cb..566e11f6bfc0 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -11,15 +11,26 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: innolux,ee101ia-01d
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   backlight: true
+  data-mapping: true
   enable-gpios: true
   power-supply: true
   width-mm: true
@@ -27,5 +38,13 @@ properties:
   panel-timing: true
   port: true
 
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
 additionalProperties: false
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
index cda36c04e85c..72788e3e6c59 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
index 4f92365e888a..63c82a4378ff 100644
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -35,6 +35,8 @@ properties:
       phandle of the gpio for power ic line
       Power IC supply enable, High active
 
+  port: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index c45c92a3d41f..b4be9bd8ddde 100644
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -26,6 +23,8 @@ properties:
   reg: true
   reset-gpios: true
 
+  spi-3wire: true
+
 required:
   - compatible
   - power-supply
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 000000000000..ebdca5f5a001
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
index 3715882b63b6..3f6efbb942da 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
 
 maintainers:
-  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
 
 allOf:
   - $ref: panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
index b4314ce7b411..ee357e139ac0 100644
--- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
@@ -15,13 +15,13 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: lg,lg4573
 
   reg: true
-  spi-max-frequency: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 830e335ddb53..628c4b898111 100644
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: LG.Philips LB035Q02 Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -24,6 +21,9 @@ properties:
   enable-gpios: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - enable-gpios
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
index b5e7ee230fa6..5cf3c588f46d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa104xd12
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
index 977c50a85b67..54750cc5440d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa121td01
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
index ef4c0a24512d..41ee3157a1cd 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
@@ -34,7 +34,7 @@ properties:
     description: phandle of gpio for reset line - This should be 8mA, gpio
       can be configured using mux, pinctrl, pinctrl-names (active high)
 
-  vddio-supply:
+  vddi0-supply:
     description: phandle of the regulator that provides the supply voltage
       Power IC supply
 
@@ -46,6 +46,7 @@ properties:
 
   reg: true
   port: true
+  backlight: true
 
 required:
   - compatible
@@ -73,10 +74,9 @@ examples:
             vddpos-supply = <&lab>;
             vddneg-supply = <&ibb>;
 
+            backlight = <&pmi8998_wled>;
             reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 
-            #address-cells = <1>;
-            #size-cells = <0>;
             port {
                 tianma_nt36672a_in_0: endpoint {
                     remote-endpoint = <&dsi0_out>;
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
index 17cbd0ad32bf..ad7d3575190e 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -50,4 +50,3 @@ examples:
       };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 000000000000..fcc50db6a812
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel Device Tree Bindings
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: panel-lvds
+
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - advantech,idk-1110wr
+            - advantech,idk-2121wr
+            - innolux,ee101ia-01d
+            - mitsubishi,aa104xd12
+            - mitsubishi,aa121td01
+            - sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - auo,b101ew05
+          - tbs,a711-panel
+
+      - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..c2df8d28aaf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+    - Vddi: Logic level supply for interface signals
+    Combined into one in this binding called: power-supply
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sainsmart18
+      - const: panel-mipi-dbi-spi
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 62f5f050c1bc..18241f4051d2 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -35,6 +35,8 @@ properties:
       - ampire,am-480272h3tmqw-t01h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
       - ampire,am800480r3tmqwa1h
+        # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+      - ampire,am800600p5tmqw-tb8h
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
       - auo,b101aw03
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
@@ -105,6 +107,10 @@ properties:
       - chunghwa,claa101wb01
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wb03
+        # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,fg040346dsswbg04
+        # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+      - dataimage,fg1001l0dsswmg01
         # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
       - dataimage,scf0700c48ggu18
         # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
@@ -135,6 +141,8 @@ properties:
         # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
       - edt,etm0700g0dh6
       - edt,etm0700g0edh6
+        # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+      - edt,etml0700y5dha
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
@@ -156,6 +164,8 @@ properties:
       - hannstar,hsd070pww1
         # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
       - hannstar,hsd100pxn1
+        # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+      - hannstar,hsd101pww2
         # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
       - hit,tx23d38vm0caa
         # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
@@ -222,6 +232,10 @@ properties:
       - logictechno,lttd800480070-l6wh-rt
         # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
       - mitsubishi,aa070mc01-ca1
+        # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700s4t-6
+        # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+      - multi-inno,mi0800ft-9
         # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
       - multi-inno,mi1010ait-1cp
         # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
@@ -268,6 +282,8 @@ properties:
       - samsung,atna33xc20
         # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
       - samsung,lsn122dl01-c01
+        # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+      - samsung,ltl101al01
         # Samsung Electronics 10.1" WSVGA TFT LCD panel
       - samsung,ltn101nt05
         # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
@@ -282,6 +298,8 @@ properties:
       - sharp,lq101k1ly04
         # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
       - sharp,lq123p1jx31
+        # Sharp 14" (1920x1080 pixels) TFT LCD panel
+      - sharp,lq140m1jw46
         # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
       - sharp,ls020b1dd01d
         # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
@@ -290,6 +308,8 @@ properties:
       - starry,kr070pe2t
         # Starry 12.2" (1920x1200 pixels) TFT LCD panel
       - starry,kr122ea0sra
+        # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+      - startek,kd070wvfpa
         # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
       - team-source-display,tst043015cmhx
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index 9bf592dc3033..229e3b36ee29 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -71,78 +71,72 @@ properties:
 
   hfront-porch:
     description: Horizontal front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   hback-porch:
     description: Horizontal back porch timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   hsync-len:
     description: Horizontal sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   vfront-porch:
     description: Vertical front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
 
   vback-porch:
     description: Vertical back porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
 
   vsync-len:
     description: Vertical sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
@@ -152,6 +146,7 @@ properties:
       Horizontal sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   vsync-active:
@@ -159,6 +154,7 @@ properties:
       Vertical sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   de-active:
@@ -166,6 +162,7 @@ properties:
       Data enable.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   pixelclk-active:
@@ -175,6 +172,7 @@ properties:
       sample data on rising edge.
       Use 1 to drive pixel data on rising edge and
       sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   syncclk-active:
@@ -185,6 +183,7 @@ properties:
       sample sync on rising edge of pixel clock.
       Use 1 to drive sync on rising edge and
       sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   interlaced:
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
index 745dd247c409..d62fd692bf10 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -24,6 +24,7 @@ properties:
 
   dsi-lanes:
     description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [3, 4]
 
   v3p3-supply:
@@ -37,6 +38,7 @@ properties:
       0 - burst-mode
       1 - non-burst with sync event
       2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2]
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index 060ee27a4749..c0fabeb38628 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Andrzej Hajda <a.hajda@samsung.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -45,6 +42,9 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg
@@ -63,8 +63,6 @@ examples:
 
         lcd@0 {
             compatible = "samsung,ld9040";
-            #address-cells = <1>;
-            #size-cells = <0>;
 
             reg = <0>;
             vdd3-supply = <&ldo7_reg>;
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
index ea58df49263a..6f1fc7469f07 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -12,6 +12,7 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
   - $ref: /schemas/leds/backlight/common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -23,6 +24,10 @@ properties:
   default-brightness: true
   max-brightness: true
 
+  spi-3wire: true
+  spi-cpha: true
+  spi-cpol: true
+
   vdd3-supply:
     description: VDD regulator
 
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index ca959451557e..1cdc91b3439f 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -36,6 +36,7 @@ properties:
 
   init-delay:
     description: delay after initialization sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   panel-width-mm:
     description: physical panel width [mm]
diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
index e63a570ae59d..2e75e3738ff0 100644
--- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -7,17 +7,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml/#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: sgd,gktw70sdae4se
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: sgd,gktw70sdae4se
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-18
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - port
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
index a679d3647dbd..9ec0e8aae4c6 100644
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -30,7 +30,12 @@ allOf:
 
 properties:
   compatible:
-    const: sharp,lq101r1sx01
+    oneOf:
+      - items:
+          - const: sharp,lq101r1sx03
+          - const: sharp,lq101r1sx01
+      - items:
+          - const: sharp,lq101r1sx01
 
   reg: true
   power-supply: true
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
index 6dff59fe4be1..34d5e20c6cb3 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -17,6 +17,9 @@ description: |
   Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
   inbuilt ST7701 chip.
 
+  Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+  which has built-in ST7701 chip.
+
 allOf:
   - $ref: panel-common.yaml#
 
@@ -24,6 +27,7 @@ properties:
   compatible:
     items:
       - enum:
+          - densitron,dmt028vghmcmi-1a
           - techstar,ts8550b
       - const: sitronix,st7701
 
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index fa46d151e7b3..d984b59daa4a 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sitronix ST7789V RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -26,6 +23,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 78d060097052..059cc6dbcfca 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -4,7 +4,12 @@
 $id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sony ACX424AKP 4" 480x864 AMOLED panel
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+  the Novatek NT35560 display controller. The only difference is that
+  the AKM is configured to use 10 pixels less in the Y axis than the
+  AKP.
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -14,7 +19,9 @@ allOf:
 
 properties:
   compatible:
-    const: sony,acx424akp
+    enum:
+      - sony,acx424akp
+      - sony,acx424akm
   reg: true
   reset-gpios: true
   vddi-supply:
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
index 95d053c548ab..98abdf4ddeac 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony ACX565AKM SDI Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index 4aa605613445..e8c8ee8d7c88 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -6,16 +6,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Toppoly TD Panels
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Marek Belisko <marek@goldelico.com>
   - H. Nikolaus Schaller <hns@goldelico.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -31,6 +28,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - port
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index 13efea574584..b3e588022082 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -76,17 +76,21 @@ properties:
 
   renesas,cmms:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      maxItems: 1
     description:
       A list of phandles to the CMM instances present in the SoC, one for each
       available DU channel.
 
   renesas,vsps:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
     description:
       A list of phandle and channel index tuples to the VSPs that handle the
-      memory interfaces for the DU channels. The phandle identifies the VSP
-      instance that serves the DU channel, and the channel index identifies
-      the LIF instance in that VSP.
+      memory interfaces for the DU channels.
 
 required:
   - compatible
@@ -105,7 +109,6 @@ allOf:
       properties:
         clocks:
           minItems: 1
-          maxItems: 3
           items:
             - description: Functional clock
             - description: DU_DOTCLKIN0 input clock
@@ -113,7 +116,6 @@ allOf:
 
         clock-names:
           minItems: 1
-          maxItems: 3
           items:
             - const: du.0
             - pattern: '^dclkin\.[01]$'
@@ -155,7 +157,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -164,7 +165,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -212,7 +212,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -221,7 +220,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -267,7 +265,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -276,7 +273,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -323,7 +319,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -332,7 +327,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -382,7 +376,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -393,7 +386,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -444,7 +436,6 @@ allOf:
       properties:
         clocks:
           minItems: 4
-          maxItems: 8
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -457,7 +448,6 @@ allOf:
 
         clock-names:
           minItems: 4
-          maxItems: 8
           items:
             - const: du.0
             - const: du.1
@@ -521,7 +511,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -532,7 +521,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -592,7 +580,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -603,7 +590,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -662,14 +648,12 @@ allOf:
       properties:
         clocks:
           minItems: 1
-          maxItems: 2
           items:
             - description: Functional clock for DU0
             - description: DU_DOTCLKIN0 input clock
 
         clock-names:
           minItems: 1
-          maxItems: 2
           items:
             - const: du.0
             - const: dclkin.0
@@ -719,7 +703,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -728,7 +711,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -787,7 +769,6 @@ allOf:
             - description: Functional clock
 
         clock-names:
-          maxItems: 1
           items:
             - const: du.0
 
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index 39792f051d2d..9a223df8530c 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -8,6 +8,7 @@ Required properties:
 	"rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
 	"rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
 	"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
+	"rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"
 - reg: Represent the physical address range of the controller.
 - interrupts: Represent the controller's interrupt to the CPU(s).
 - clocks, clock-names: Phandles to the controller's pll reference
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..7e59dee15a5f 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -23,10 +23,22 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
@@ -36,7 +48,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -47,10 +60,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -72,6 +89,7 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
@@ -79,27 +97,21 @@ properties:
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    properties:
-      port:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
+    patternProperties:
+      "^port(@0)?$":
+        $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
-
         properties:
+          endpoint:
+            description: Connection to the VOP
           endpoint@0:
-            $ref: /schemas/graph.yaml#/properties/endpoint
             description: Connection to the VOPB
-
           endpoint@1:
-            $ref: /schemas/graph.yaml#/properties/endpoint
             description: Connection to the VOPL
-
-        required:
-          - endpoint@0
-          - endpoint@1
-
-    required:
-      - port
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the DWC HDMI TX
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 008c144257cb..1a68a940d165 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -26,14 +26,6 @@ properties:
   clock-names:
     const: hclk
 
-  pinctrl-0:
-    maxItems: 2
-
-  pinctrl-names:
-    const: default
-    description:
-      Switch the iomux for the HPD/I2C pins to HDMI function.
-
   power-domains:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
index 7204da5eb4c5..a8d18a37cb23 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -21,6 +21,8 @@ properties:
 
   ports:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..fba45091d909
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  reg-names:
+    items:
+      - const: vop
+      - const: gamma-lut
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                reg-names = "vop", "gamma-lut";
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk",
+                              "hclk",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
new file mode 100644
index 000000000000..458d399cb025
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI DDC
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,exynos4210-hdmiddc
+      - const: samsung,exynos5-hdmiddc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ddc@50 {
+            compatible = "samsung,exynos4210-hdmiddc";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
new file mode 100644
index 000000000000..e4a68c5a1a09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-hdmi
+      - samsung,exynos4212-hdmi
+      - samsung,exynos5420-hdmi
+      - samsung,exynos5433-hdmi
+
+  clocks:
+    minItems: 5
+    maxItems: 10
+
+  clock-names:
+    minItems: 5
+    maxItems: 10
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI DDC node.
+
+  hdmi-en-supply:
+    description:
+      Provides voltage source for DCC lines available on HDMI connector. When
+      there is no power provided for DDC epprom, some TV-sets do not pulls up
+      HPD (hot plug detect) line, what causes HDMI block to stay turned off.
+      When provided, the regulator allows TV-set correctly signal HPD event.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to HPD
+
+  interrupts:
+    maxItems: 1
+
+  phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the HDMI PHY node.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-supply:
+    description:
+      VDD 1.0V HDMI TX.
+
+  vdd_osc-supply:
+    description:
+      VDD 1.8V HDMI OSC.
+
+  vdd_pll-supply:
+    description:
+      VDD 1.0V HDMI PLL.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ddc
+  - hpd-gpios
+  - interrupts
+  - phy
+  - reg
+  - samsung,syscon-phandle
+  - '#sound-dai-cells'
+  - vdd-supply
+  - vdd_osc-supply
+  - vdd_pll-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP APB bus.
+            - description: Gate of HDMI-PHY IP APB bus.
+            - description: Gate of HDMI TMDS clock.
+            - description: Gate of HDMI pixel clock.
+            - description: TMDS clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and tmds_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Pixel clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and pixel_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Oscillator clock, used as parent of following *_user
+                clocks in case HDMI-PHY is not operational.
+            - description: Gate of HDMI SPDIF clock.
+        clock-names:
+          items:
+            - const: hdmi_pclk
+            - const: hdmi_i_pclk
+            - const: i_tmds_clk
+            - const: i_pixel_clk
+            - const: tmds_clko
+            - const: tmds_clko_user
+            - const: pixel_clko
+            - const: pixel_clko_user
+            - const: oscclk
+            - const: i_spdif_clk
+      required:
+        - samsung,sysreg-phandle
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP bus clock.
+            - description: Gate of HDMI special clock.
+            - description: Pixel special clock, one of the two possible inputs
+                of HDMI clock mux.
+            - description: HDMI PHY clock output, one of two possible inputs of
+                HDMI clock mux.
+            - description: It is required by the driver to switch between the 2
+                parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+                after configuration, parent is set to sclk_hdmiphy else
+                sclk_pixel.
+        clock-names:
+          items:
+            - const: hdmi
+            - const: sclk_hdmi
+            - const: sclk_pixel
+            - const: sclk_hdmiphy
+            - const: mout_hdmi
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hdmi@13970000 {
+        compatible = "samsung,exynos5433-hdmi";
+        reg = <0x13970000 0x70000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_disp CLK_PCLK_HDMI>,
+                 <&cmu_disp CLK_PCLK_HDMIPHY>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+                 <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+                 <&xxti>,
+                 <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+        clock-names = "hdmi_pclk",
+                      "hdmi_i_pclk",
+                      "i_tmds_clk",
+                      "i_pixel_clk",
+                      "tmds_clko",
+                      "tmds_clko_user",
+                      "pixel_clko",
+                      "pixel_clko_user",
+                      "oscclk",
+                      "i_spdif_clk";
+        phy = <&hdmiphy>;
+        ddc = <&hsi2c_11>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,sysreg-phandle = <&syscon_disp>;
+        #sound-dai-cells = <0>;
+
+        hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&ldo6_reg>;
+        vdd_osc-supply = <&ldo7_reg>;
+        vdd_pll-supply = <&ldo6_reg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                hdmi_to_tv: endpoint {
+                    remote-endpoint = <&tv_to_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                hdmi_to_mhl: endpoint {
+                    remote-endpoint = <&mhl_to_hdmi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
new file mode 100644
index 000000000000..25d53fde92e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Mixer
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data
+  inputs before passing it to an output device.  The output is passed to HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mixer
+          - samsung,exynos4212-mixer
+          - samsung,exynos5250-mixer
+          - samsung,exynos5420-mixer
+      - const: samsung,exynos5-mixer
+        deprecated: true
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Gate of Mixer IP bus clock.
+      - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+      - description: HDMI Special clock, one of the two possible inputs of
+          mixer mux.
+      - description: Video Processor clock.
+      - description: Mixer mux clock.
+      - description: Mixer Special clock.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mixer
+      - const: hdmi
+      - const: sclk_hdmi
+      - const: vp
+      - const: mout_mixer
+      - const: sclk_mixer
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: Mixer memory region.
+      - description: Video Processor memory region.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mixer
+              - samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-mixer
+              - samsung,exynos5250-mixer
+              - samsung,exynos5420-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        regs:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mixer@14450000 {
+        compatible = "samsung,exynos5250-mixer";
+        reg = <0x14450000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MIXER>,
+                 <&clock CLK_HDMI>,
+                 <&clock CLK_SCLK_HDMI>;
+        clock-names = "mixer",
+                      "hdmi",
+                      "sclk_hdmi";
+        iommus = <&sysmmu_tv>;
+        power-domains = <&pd_disp1>;
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
new file mode 100644
index 000000000000..6380eeebb073
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos5433 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5433-decon
+      - samsung,exynos5433-decon-tv
+
+  clocks:
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk_decon
+      - const: aclk_smmu_decon0x
+      - const: aclk_xiu_decon0x
+      - const: pclk_smmu_decon0x
+      - const: aclk_smmu_decon1x
+      - const: aclk_xiu_decon1x
+      - const: pclk_smmu_decon1x
+      - const: sclk_decon_vclk
+      - const: sclk_decon_eclk
+      - const: dsd
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+    description: |
+      Interrupts depend on mode of work:
+       - video mode: vsync
+       - command mode: lcd_sys
+       - command mode with software trigger: lcd_sys, te
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+      - const: te
+
+  iommus:
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13800000 {
+        compatible = "samsung,exynos5433-decon";
+        reg = <0x13800000 0x2104>;
+        clocks = <&cmu_disp CLK_PCLK_DECON>,
+                 <&cmu_disp CLK_ACLK_DECON>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_SCLK_DECON_VCLK>,
+                 <&cmu_disp CLK_SCLK_DECON_ECLK>,
+                 <&cmu_disp CLK_SCLK_DSD>;
+        clock-names = "pclk",
+                      "aclk_decon",
+                      "aclk_smmu_decon0x",
+                      "aclk_xiu_decon0x",
+                      "pclk_smmu_decon0x",
+                      "aclk_smmu_decon1x",
+                      "aclk_xiu_decon1x",
+                      "pclk_smmu_decon1x",
+                      "sclk_decon_vclk",
+                      "sclk_decon_eclk",
+                      "dsd";
+        power-domains = <&pd_disp>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+        samsung,disp-sysreg = <&syscon_disp>;
+        iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+        iommu-names = "m0", "m1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                decon_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_decon>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
new file mode 100644
index 000000000000..26e5017737a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is
+  not capable of transferring high resoltuion frame data as DECON can send. MIC
+  solves this problem by compressing the frame data by 1/2 before it is
+  transferred through MIPI DSI. The compressed frame data must be uncompressed
+  in the panel PCB.
+
+properties:
+  compatible:
+    const: samsung,exynos5433-mic
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk_mic0
+      - const: sclk_rgb_vclk_to_mic0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg
+  - samsung,disp-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    image-processor@13930000 {
+        compatible = "samsung,exynos5433-mic";
+        reg = <0x13930000 0x48>;
+        clocks = <&cmu_disp CLK_PCLK_MIC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+        clock-names = "pclk_mic0",
+                      "sclk_rgb_vclk_to_mic0";
+        power-domains = <&pd_disp>;
+        samsung,disp-syscon = <&syscon_disp>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mic_to_decon: endpoint {
+                    remote-endpoint = <&decon_to_mic>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mic_to_dsi: endpoint {
+                    remote-endpoint = <&dsi_to_mic>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
new file mode 100644
index 000000000000..992c23ca7a4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos7 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    const: samsung,exynos7-decon
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: pclk_decon0
+      - const: aclk_decon0
+      - const: decon0_eclk
+      - const: decon0_vclk
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: timing configuration for lcd i80 interface support
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13930000 {
+        compatible = "samsung,exynos7-decon";
+        reg = <0x13930000 0x1000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock_disp 100>, /* PCLK_DECON_INT */
+                 <&clock_disp 101>, /* ACLK_DECON_INT */
+                 <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */
+                 <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */
+        clock-names = "pclk_decon0",
+                      "aclk_decon0",
+                      "decon0_eclk",
+                      "decon0_vclk";
+        pinctrl-0 = <&lcd_clk &pwm1_out>;
+        pinctrl-names = "default";
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
new file mode 100644
index 000000000000..075231716b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2443-fimd
+      - samsung,s3c6400-fimd
+      - samsung,s5pv210-fimd
+      - samsung,exynos3250-fimd
+      - samsung,exynos4210-fimd
+      - samsung,exynos5250-fimd
+      - samsung,exynos5420-fimd
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sclk_fimd
+      - const: fimd
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: |
+      Timing configuration for lcd i80 interface support.
+      The parameters are defined as::
+      VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                        :            :            :            :            :
+      Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                        | cs-setup+1 |            :            :            :
+                        |<---------->|            :            :            :
+      Chip Select     ???????????????|____________:____________:____________|??
+                                     | wr-setup+1 |            | wr-hold+1  |
+                                     |<---------->|            |<---------->|
+      Write Enable    ????????????????????????????|____________|???????????????
+                                                  | wr-active+1|
+                                                  |<---------->|
+      Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,invert-vden:
+    type: boolean
+    description:
+      Video enable signal is inverted.
+
+  samsung,invert-vclk:
+    type: boolean
+    description:
+      Video clock signal is inverted.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to System Register syscon.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^port@[0-4]+$":
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Contains ports with port with index::
+       0 - for CAMIF0 input,
+       1 - for CAMIF1 input,
+       2 - for CAMIF2 input,
+       3 - for parallel output,
+       4 - for write-back interface
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-fimd
+    then:
+      properties:
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    fimd@11c00000 {
+        compatible = "samsung,exynos4210-fimd";
+        interrupt-parent = <&combiner>;
+        reg = <0x11c00000 0x20000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <11 0>, <11 1>, <11 2>;
+        clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+        clock-names = "sclk_fimd", "fimd";
+        power-domains = <&pd_lcd0>;
+        iommus = <&sysmmu_fimd0>;
+        samsung,sysreg = <&sys_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        samsung,invert-vden;
+        samsung,invert-vclk;
+
+        pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+        pinctrl-names = "default";
+
+        port@3 {
+            reg = <3>;
+
+            fimd_dpi_ep: endpoint {
+                remote-endpoint = <&lcd_ep>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index c2499a7906f5..dd64f70b5014 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -4,10 +4,9 @@
 $id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple Framebuffer Device Tree Bindings
+title: Simple Framebuffer
 
 maintainers:
-  - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
   - Hans de Goede <hdegoede@redhat.com>
 
 description: |+
@@ -52,11 +51,13 @@ description: |+
 
 properties:
   compatible:
-    items:
-      - enum:
-          - apple,simple-framebuffer
-          - allwinner,simple-framebuffer
-          - amlogic,simple-framebuffer
+    oneOf:
+      - items:
+          - enum:
+              - apple,simple-framebuffer
+              - allwinner,simple-framebuffer
+              - amlogic,simple-framebuffer
+          - const: simple-framebuffer
       - const: simple-framebuffer
 
   reg:
@@ -83,13 +84,25 @@ properties:
   format:
     description: >
       Format of the framebuffer:
+        * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
         * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+        * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
         * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
     enum:
+      - a1r5g5b5
+      - a2r10g10b10
       - a8b8g8r8
+      - a8r8g8b8
       - r5g6b5
+      - r5g5b5a1
+      - r8g8b8
+      - x1r5g5b5
       - x2r10g10b10
       - x8r8g8b8
 
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..621f27148419 100644
--- a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sitronix ST7735R Display Panels Device Tree Bindings
+title: Sitronix ST7735R Display Panels
 
 maintainers:
   - David Lechner <david@lechnology.com>
@@ -15,6 +15,7 @@ description:
 
 allOf:
   - $ref: panel/panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -32,15 +33,13 @@ properties:
               - okaya,rh128128t
           - const: sitronix,st7715r
 
-  spi-max-frequency:
-    maximum: 32000000
-
   dc-gpios:
     maxItems: 1
     description: Display data/command selection (D/CX)
 
   backlight: true
   reg: true
+  spi-max-frequency: true
   reset-gpios: true
   rotation: true
 
@@ -48,7 +47,6 @@ required:
   - compatible
   - reg
   - dc-gpios
-  - reset-gpios
 
 additionalProperties: false
 
@@ -72,6 +70,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index 2ed2a7d0ca2f..669f70b1b4c4 100644
--- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -8,14 +8,26 @@ title: Solomon SSD1307 OLED Controller Framebuffer
 
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
+  - Javier Martinez Canillas <javierm@redhat.com>
 
 properties:
   compatible:
-    enum:
-      - solomon,ssd1305fb-i2c
-      - solomon,ssd1306fb-i2c
-      - solomon,ssd1307fb-i2c
-      - solomon,ssd1309fb-i2c
+    oneOf:
+      # Deprecated compatible strings
+      - items:
+          - enum:
+              - solomon,ssd1305fb-i2c
+              - solomon,ssd1306fb-i2c
+              - solomon,ssd1307fb-i2c
+              - solomon,ssd1309fb-i2c
+        deprecated: true
+      - items:
+          - enum:
+              - sinowealth,sh1106
+              - solomon,ssd1305
+              - solomon,ssd1306
+              - solomon,ssd1307
+              - solomon,ssd1309
 
   reg:
     maxItems: 1
@@ -26,6 +38,14 @@ properties:
   reset-gpios:
     maxItems: 1
 
+  # Only required for SPI
+  dc-gpios:
+    description:
+      GPIO connected to the controller's D/C# (Data/Command) pin,
+      that is needed for 4-wire SPI to tell the controller if the
+      data sent is for a command register or the display data RAM
+    maxItems: 1
+
   vbat-supply:
     description: The supply for VBAT
 
@@ -130,11 +150,27 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
   - if:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1305fb-i2c
+            const: sinowealth,sh1106
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - solomon,ssd1305-i2c
+              - solomon,ssd1305
     then:
       properties:
         solomon,dclk-div:
@@ -146,7 +182,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1306fb-i2c
+            enum:
+              - solomon,ssd1306-i2c
+              - solomon,ssd1306
     then:
       properties:
         solomon,dclk-div:
@@ -158,7 +196,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1307fb-i2c
+            enum:
+              - solomon,ssd1307-i2c
+              - solomon,ssd1307
     then:
       properties:
         solomon,dclk-div:
@@ -172,7 +212,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1309fb-i2c
+            enum:
+              - solomon,ssd1309-i2c
+              - solomon,ssd1309
     then:
       properties:
         solomon,dclk-div:
@@ -180,7 +222,7 @@ allOf:
         solomon,dclk-frq:
           default: 10
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -188,15 +230,15 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            ssd1307: oled@3c {
-                    compatible = "solomon,ssd1307fb-i2c";
+            ssd1307_i2c: oled@3c {
+                    compatible = "solomon,ssd1307";
                     reg = <0x3c>;
                     pwms = <&pwm 4 3000>;
                     reset-gpios = <&gpio2 7>;
             };
 
-            ssd1306: oled@3d {
-                    compatible = "solomon,ssd1306fb-i2c";
+            ssd1306_i2c: oled@3d {
+                    compatible = "solomon,ssd1306";
                     reg = <0x3c>;
                     pwms = <&pwm 4 3000>;
                     reset-gpios = <&gpio2 7>;
@@ -206,3 +248,30 @@ examples:
                     solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
             };
     };
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_spi: oled@0 {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x0>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+            };
+
+            ssd1306_spi: oled@1 {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x1>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
index 3d107e9434be..b3d5e1b96fae 100644
--- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -45,6 +45,8 @@ properties:
 
   ports:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Should contain a list of phandles pointing to display interface port
       of DPU devices.
@@ -61,4 +63,3 @@ examples:
         compatible = "sprd,display-subsystem";
         ports = <&dpu_out>;
     };
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index ce1ef93cce93..c488308d7be1 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -58,9 +58,20 @@ properties:
           DSI input port node, connected to the ltdc rgb output port.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          DSI output port node, connected to a panel or a bridge input port"
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          DSI output port node, connected to a panel or a bridge input port.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
 
 required:
   - "#address-cells"
@@ -110,7 +121,7 @@ examples:
               };
         };
 
-        panel-dsi@0 {
+        panel@0 {
               compatible = "orisetech,otm8009a";
               reg = <0>;
               reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
@@ -125,4 +136,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 01e2da23790b..d6ea4d62a2cf 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -75,4 +75,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
index de0c678b3c29..564ea845c82e 100644
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -58,8 +58,8 @@ patternProperties:
   "^dsi@[0-9a-f]+$":
     description: subnodes for the three DSI host adapters
     type: object
-    allOf:
-      - $ref: dsi-controller.yaml#
+    $ref: dsi-controller.yaml#
+
     properties:
       compatible:
         const: ste,mcde-dsi
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
deleted file mode 100644
index e4a25cedc5cf..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Tegra MIPI pad calibration controller
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-mipi"
-- reg: Physical base address and length of the controller's registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mipi-cal
-- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
-  that need to be calibrated for a given device.
-
-User nodes need to contain an nvidia,mipi-calibrate property that has a
-phandle to refer to the calibration controller node and a bitmask of the pads
-that need to be calibrated.
-
-Example:
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		clock-names = "mipi-cal";
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	...
-
-	host1x@50000000 {
-		...
-
-		dsi@54300000 {
-			...
-
-			nvidia,mipi-calibrate = <&mipi 0x060>;
-
-			...
-		};
-
-		...
-	};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 000000000000..d5ca8cf86e8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mipi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra114-mipi
+      - nvidia,tegra210-mipi
+      - nvidia,tegra186-mipi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: mipi-cal
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description: The number of cells in a MIPI calibration specifier.
+      Should be 1. The single cell specifies a bitmask of the pads that
+      need to be calibrated for a given device.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#nvidia,mipi-calibrate-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+
+    mipi@700e3000 {
+        compatible = "nvidia,tegra114-mipi";
+        reg = <0x700e3000 0x100>;
+        clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+        clock-names = "mipi-cal";
+        #nvidia,mipi-calibrate-cells = <1>;
+    };
+
+    dsia: dsi@54300000 {
+        compatible = "nvidia,tegra114-dsi";
+        reg = <0x54300000 0x00040000>;
+        clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+                 <&tegra_car TEGRA114_CLK_DSIALP>,
+                 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&tegra_car 48>;
+        reset-names = "dsi";
+        nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 000000000000..9ab123cd2325
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+  pins which can be assigned to either the DPAUX channel or to an I2C
+  controller.
+
+  When configured for DisplayPort AUX operation, the DPAUX controller
+  can also be used to communicate with a DisplayPort device using the
+  AUX channel.
+
+properties:
+  $nodename:
+    pattern: "^dpaux@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-dpaux
+          - nvidia,tegra210-dpaux
+          - nvidia,tegra186-dpaux
+          - nvidia,tegra194-dpaux
+
+      - items:
+          - const: nvidia,tegra132-dpaux
+          - const: nvidia,tegra124-dpaux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the DPAUX hardware
+      - description: reference clock
+
+  clock-names:
+    items:
+      - const: dpaux
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dpaux
+
+  power-domains:
+    maxItems: 1
+
+  i2c-bus:
+    description: Subnode where I2C slave devices are listed. This
+      subnode must be always present. If there are no I2C slave
+      devices, an empty node should be added. See ../../i2c/i2c.yaml
+      for more information.
+    type: object
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  vdd-supply:
+    description: phandle of a supply that powers the DisplayPort
+      link
+
+patternProperties:
+  "^pinmux-[a-z0-9]+$":
+    description:
+      Since only three configurations are possible, only three child
+      nodes are needed to describe the pin mux'ing options for the
+      DPAUX pads. Furthermore, given that the pad functions are only
+      applicable to a single set of pads, the child nodes only need
+      to describe the pad group the functions are being applied to
+      rather than the individual pads.
+    type: object
+    properties:
+      groups:
+        const: dpaux-io
+
+      function:
+        enum:
+          - aux
+          - i2c
+          - off
+
+    additionalProperties: false
+
+    required:
+      - groups
+      - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dpaux: dpaux@545c0000 {
+        compatible = "nvidia,tegra210-dpaux";
+        reg = <0x545c0000 0x00040000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>;
+        clock-names = "dpaux", "parent";
+        resets = <&tegra_car 181>;
+        reset-names = "dpaux";
+        power-domains = <&pd_sor>;
+        status = "disabled";
+
+        state_dpaux_aux: pinmux-aux {
+            groups = "dpaux-io";
+            function = "aux";
+        };
+
+        state_dpaux_i2c: pinmux-i2c {
+            groups = "dpaux-io";
+            function = "i2c";
+        };
+
+        state_dpaux_off: pinmux-off {
+            groups = "dpaux-io";
+            function = "off";
+        };
+
+        i2c-bus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 000000000000..907fb0baccae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+  and DP outputs.
+
+properties:
+  $nodename:
+    pattern: "^sor@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-sor
+          - nvidia,tegra210-sor
+          - nvidia,tegra210-sor1
+          - nvidia,tegra186-sor
+          - nvidia,tegra186-sor1
+          - nvidia,tegra194-sor
+
+      - items:
+          - const: nvidia,tegra132-sor
+          - const: nvidia,tegra124-sor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    maxItems: 6
+
+  clock-names:
+    minItems: 5
+    maxItems: 6
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sor
+
+  power-domains:
+    maxItems: 1
+
+  avdd-io-hdmi-dp-supply:
+    description: I/O supply for HDMI/DP
+
+  vdd-hdmi-dp-pll-supply:
+    description: PLL supply for HDMI/DP
+
+  hdmi-supply:
+    description: +5.0V HDMI connector supply, required for HDMI
+
+  # Tegra186 and later
+  nvidia,interface:
+    description: index of the SOR interface
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel, required for eDP
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,xbar-cfg:
+    description: 5 cells containing the crossbar configuration.
+      Each lane of the SOR, identified by the cell's index, is
+      mapped via the crossbar to the pad specified by the cell's
+      value.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  # optional when driving an eDP output
+  nvidia,dpaux:
+    description: phandle to a DispayPort AUX interface
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sor
+              - nvidia,tegra194-sor
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+            - description: SOR pad output clock
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+            - const: pad
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - avdd-io-hdmi-dp-supply
+  - vdd-hdmi-dp-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sor0: sor@54540000 {
+        compatible = "nvidia,tegra210-sor";
+        reg = <0x54540000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>,
+                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+        clock-names = "sor", "out", "parent", "dp", "safe";
+        resets = <&tegra_car 182>;
+        reset-names = "sor";
+        pinctrl-0 = <&state_dpaux_aux>;
+        pinctrl-1 = <&state_dpaux_i2c>;
+        pinctrl-2 = <&state_dpaux_off>;
+        pinctrl-names = "aux", "i2c", "off";
+        power-domains = <&pd_sor>;
+
+        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+        hdmi-supply = <&vdd_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 000000000000..7200095ef19e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vic@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-vic
+          - nvidia,tegra210-vic
+          - nvidia,tegra186-vic
+          - nvidia,tegra194-vic
+          - nvidia,tegra234-vic
+
+      - items:
+          - const: nvidia,tegra132-vic
+          - const: nvidia,tegra124-vic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the VIC hardware
+
+  clock-names:
+    items:
+      - const: vic
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vic
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the VIC;
+      see ../interconnect/interconnect.txt for details.
+    items:
+      - description: memory read client for VIC
+      - description: memory write client for VIC
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 000000000000..265a60d79d89
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-dc
+      - nvidia,tegra194-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: display controller pixel clock
+
+  clock-names:
+    items:
+      - const: dc
+
+  resets:
+    items:
+      - description: display controller reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the
+      display controller; see ../interconnect/interconnect.txt
+      for details.
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read-0
+      - const: read-1
+
+  nvidia,outputs:
+    description: A list of phandles of outputs that this display
+      controller can drive.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  nvidia,head:
+    description: The number of the display controller head. This
+      is used to setup the various types of output to receive
+      video data from the given head.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,outputs
+  - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 000000000000..8c0231345529
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,310 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display-hub@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-display
+      - nvidia,tegra194-display
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: display hub reset
+      - description: window group 0 reset
+      - description: window group 1 reset
+      - description: window group 2 reset
+      - description: window group 3 reset
+      - description: window group 4 reset
+      - description: window group 5 reset
+
+  reset-names:
+    items:
+      - const: misc
+      - const: wgrp0
+      - const: wgrp1
+      - const: wgrp2
+      - const: wgrp3
+      - const: wgrp4
+      - const: wgrp5
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  "^display@[0-9a-f]+$":
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-display
+    then:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display stream compression clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: dsc
+            - const: hub
+    else:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: hub
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra186-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "dsc", "hub";
+        status = "disabled";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&sor0 &sor1>;
+            nvidia,head = <2>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra194-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "hub";
+        status = "disabled";
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <2>;
+        };
+
+        display@15230000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15230000 0x10000>;
+            interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 000000000000..e5a6145c8c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^padctl@[0-9a-f]+$"
+
+  compatible:
+    const: nvidia,tegra186-dsi-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+allOf:
+  - $ref: "/schemas/reset/reset.yaml"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@15880000 {
+        compatible = "nvidia,tegra186-dsi-padctl";
+        reg = <0x15880000 0x10000>;
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 000000000000..6eedee503aa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^dc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dc
+          - nvidia,tegra30-dc
+          - nvidia,tegra114-dc
+          - nvidia,tegra124-dc
+          - nvidia,tegra210-dc
+
+      - items:
+          - const: nvidia,tegra124-dc
+          - const: nvidia,tegra132-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: display controller pixel clock
+      - description: parent clock # optional
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: dc
+      - const: parent # optional
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  interconnect-names: true
+  interconnects: true
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  memory-region: true
+
+  nvidia,head:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of the display controller head. This is used to setup the various
+      types of output to receive video data from the given head.
+
+  nvidia,outputs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A list of phandles of outputs that this display controller can drive.
+
+  rgb:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dc
+              - nvidia,tegra30-dc
+              - nvidia,tegra114-dc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window B memory client (vertical filter)
+            - description: window C memory client
+            - description: cursor memory client
+
+        interconnect-names:
+          items:
+            - const: wina
+            - const: winb
+            - const: winb-vfilter
+            - const: winc
+            - const: cursor
+
+        rgb:
+          description: Each display controller node has a child node, named "rgb", that represents
+            the RGB output associated with the controller.
+          type: object
+          properties:
+            nvidia,ddc-i2c-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of an I2C controller used for DDC EDID probing
+
+            nvidia,hpd-gpio:
+              description: specifies a GPIO used for hotplug detection
+              maxItems: 1
+
+            nvidia,edid:
+              $ref: /schemas/types.yaml#/definitions/uint8-array
+              description: supplies a binary EDID blob
+
+            nvidia,panel:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of a display panel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-dc
+    then:
+      properties:
+        interconnects:
+          minItems: 4
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window C memory client
+            - description: cursor memory client
+            - description: window D memory client
+            - description: window T memory client
+
+        interconnect-names:
+          minItems: 4
+          items:
+            - const: wina
+            - const: winb
+            - const: winc
+            - const: cursor
+            - const: wind
+            - const: wint
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dc@54200000 {
+        compatible = "nvidia,tegra20-dc";
+        reg = <0x54200000 0x00040000>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+        clock-names = "dc";
+        resets = <&tegra_car 27>;
+        reset-names = "dc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 000000000000..75546f250ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dsi
+          - nvidia,tegra30-dsi
+          - nvidia,tegra114-dsi
+          - nvidia,tegra124-dsi
+          - nvidia,tegra210-dsi
+          - nvidia,tegra186-dsi
+
+      - items:
+          - const: nvidia,tegra132-dsi
+          - const: nvidia,tegra124-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: phandle of a supply that powers the DSI controller
+
+  nvidia,mipi-calibrate:
+    description: Should contain a phandle and a specifier specifying
+      which pads are used by this DSI output and need to be
+      calibrated. See nvidia,tegra114-mipi.yaml for details.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,ganged-mode:
+    description: contains a phandle to a second DSI controller to
+      gang up with in order to support up to 8 data lanes
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+allOf:
+  - $ref: "../dsi-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: parent
+    else:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: low-power module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: lp
+            - const: parent
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-dsi
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dsi@15300000 {
+        compatible = "nvidia,tegra186-dsi";
+        reg = <0x15300000 0x10000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_DSI>,
+                 <&bpmp TEGRA186_CLK_DSIA_LP>,
+                 <&bpmp TEGRA186_CLK_PLLD>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 000000000000..0d55e6206b5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^epp@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-epp
+      - nvidia,tegra30-epp
+      - nvidia,tegra114-epp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: epp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    epp@540c0000 {
+        compatible = "nvidia,tegra20-epp";
+        reg = <0x540c0000 0x00040000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+        resets = <&tegra_car 19>;
+        reset-names = "epp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 000000000000..bf38accd98eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr2d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr2d
+      - nvidia,tegra30-gr2d
+      - nvidia,tegra114-gr2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    items:
+      - const: 2d
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr2d@54140000 {
+        compatible = "nvidia,tegra20-gr2d";
+        reg = <0x54140000 0x00040000>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+        resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+        reset-names = "2d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 000000000000..4755a73473c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr3d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr3d
+      - nvidia,tegra30-gr3d
+      - nvidia,tegra114-gr3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 2
+    maxItems: 4
+
+  reset-names:
+    minItems: 2
+    maxItems: 4
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    minItems: 4
+    maxItems: 10
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 10
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 4
+          maxItems: 4
+
+        interconnect-names:
+          minItems: 4
+          maxItems: 4
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gr3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary module clock
+            - description: secondary module clock
+
+        clock-names:
+          items:
+            - const: 3d
+            - const: 3d2
+
+        resets:
+          items:
+            - description: primary module reset
+            - description: secondary module reset
+            - description: primary memory client hotflush reset
+            - description: secondary memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: 3d2
+            - const: mc
+            - const: mc2
+
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+        interconnects:
+          minItems: 8
+          maxItems: 8
+
+        interconnect-names:
+          minItems: 8
+          maxItems: 8
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+            - description: phandle to the TD2 power domain
+
+        power-domain-names:
+          items:
+            - const: 3d0
+            - const: 3d1
+
+      dependencies:
+        power-domains: [ power-domain-names ]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 10
+          maxItems: 10
+
+        interconnect-names:
+          minItems: 10
+          maxItems: 10
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr3d@54180000 {
+        compatible = "nvidia,tegra20-gr3d";
+        reg = <0x54180000 0x00040000>;
+        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+        resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+        reset-names = "3d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 000000000000..035b9f1f2eb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hdmi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hdmi
+          - nvidia,tegra30-hdmi
+          - nvidia,tegra114-hdmi
+          - nvidia,tegra124-hdmi
+
+      - items:
+          - const: nvidia,tegra132-hdmi
+          - const: nvidia,tegra124-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: hdmi
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  hdmi-supply:
+    description: supply for the +5V HDMI connector pin
+
+  vdd-supply:
+    description: regulator for supply voltage
+
+  pll-supply:
+    description: regulator for PLL
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: "/schemas/types.yaml#/definitions/uint8-array"
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  "#sound-dai-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - pll-supply
+  - vdd-supply
+  - nvidia,ddc-i2c-bus
+  - nvidia,hpd-gpio
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    hdmi@54280000 {
+        compatible = "nvidia,tegra124-hdmi";
+        reg = <0x54280000 0x00040000>;
+        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+                 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+        clock-names = "hdmi", "parent";
+        resets = <&tegra_car 51>;
+        reset-names = "hdmi";
+
+        hdmi-supply = <&vdd_5v0_hdmi>;
+        pll-supply = <&vdd_hdmi_pll>;
+        vdd-supply = <&vdd_3v3_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
deleted file mode 100644
index e61999ce54e9..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ /dev/null
@@ -1,675 +0,0 @@
-NVIDIA Tegra host1x
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-host1x"
-- reg: Physical base address and length of the controller's registers.
-  For pre-Tegra186, one entry describing the whole register area.
-  For Tegra186, one entry for each entry in reg-names:
-    "vm" - VM region assigned to Linux
-    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
-- interrupts: The interrupt outputs from the controller.
-- #address-cells: The number of cells used to represent physical base addresses
-  in the host1x address space. Should be 1.
-- #size-cells: The number of cells used to represent the size of an address
-  range in the host1x address space. Should be 1.
-- ranges: The mapping of the host1x address space to the CPU address space.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - host1x
-  - mc
-
-Optional properties:
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to HEG or core power domain.
-
-For each opp entry in 'operating-points-v2' table of host1x and its modules:
-- opp-supported-hw: One bitfield indicating:
-	On Tegra20: SoC process ID mask
-	On Tegra30+: SoC speedo ID mask
-
-	A bitwise AND is performed against the value and if any bit
-	matches, the OPP gets enabled.
-
-Each host1x client module having to perform DMA through the Memory Controller
-should have the interconnect endpoints set to the Memory Client and External
-Memory respectively.
-
-The host1x top-level node defines a number of children, each representing one
-of the following host1x client modules:
-
-- mpe: video encoder
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-mpe"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - mpe
-
-  Optional properties:
-  - interconnects: Must contain entry for the MPE memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to MPE power domain.
-
-- vi: video input
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - Tegra20/Tegra30/Tegra114/Tegra124:
-    - resets: Must contain an entry for each entry in reset-names.
-      See ../reset/reset.txt for details.
-    - reset-names: Must include the following entries:
-      - vi
-  - Tegra210:
-    - power-domains: Must include venc powergate node as vi is in VE partition.
-
-  ports (optional node)
-  vi can have optional ports node and max 6 ports are supported. Each port
-  should have single 'endpoint' child node. All port nodes are grouped under
-  ports node. Please refer to the bindings defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  csi (required node)
-  Tegra210 has CSI part of VI sharing same host interface and register space.
-  So, VI device node should have CSI child node.
-
-    - csi: mipi csi interface to vi
-
-      Required properties:
-      - compatible: "nvidia,tegra210-csi"
-      - reg: Physical base address offset to parent and length of the controller
-        registers.
-      - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
-        See ../clocks/clock-bindings.txt for details.
-      - power-domains: Must include sor powergate node as csicil is in
-        SOR partition.
-
-      channel (optional nodes)
-      Maximum 6 channels are supported with each csi brick as either x4 or x2
-      based on hw connectivity to sensor.
-
-      Required properties:
-      - reg: csi port number. Valid port numbers are 0 through 5.
-      - nvidia,mipi-calibrate: Should contain a phandle and a specifier
-        specifying which pads are used by this CSI port and need to be
-	calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
-
-      Each channel node must contain 2 port nodes which can be grouped
-      under 'ports' node and each port should have a single child 'endpoint'
-      node.
-
-        ports node
-        Please refer to the bindings defined in
-        Documentation/devicetree/bindings/media/video-interfaces.txt
-
-        ports node must contain below 2 port nodes.
-        port@0 with single child 'endpoint' node always a sink.
-        port@1 with single child 'endpoint' node always a source.
-
-        port@0 (required node)
-        Required properties:
-        - reg: 0
-
-	  endpoint (required node)
-	  Required properties:
-	  - data-lanes: an array of data lane from 1 to 8. Valid array
-	    lengths are 1/2/4/8.
-	  - remote-endpoint: phandle to sensor 'endpoint' node.
-
-        port@1 (required node)
-        Required properties:
-        - reg: 1
-
-	  endpoint (required node)
-	  Required properties:
-	  - remote-endpoint: phandle to vi port 'endpoint' node.
-
-  Optional properties:
-  - interconnects: Must contain entry for the VI memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to VENC power domain.
-
-- epp: encoder pre-processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-epp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - epp
-
-  Optional properties:
-  - interconnects: Must contain entry for the EPP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to HEG or core power domain.
-
-- isp: image signal processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-isp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - isp
-
-  Optional properties:
-  - interconnects: Must contain entry for the ISP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - power-domains: Phandle to VENC or core power domain.
-
-- gr2d: 2D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr2d"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 2d
-    - mc
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR2D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to HEG or core power domain.
-
-- gr3d: 3D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr3d"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    (This property may be omitted if the only clock in the list is "3d")
-    - 3d
-      This MUST be the first entry.
-    - 3d2 (Only required on SoCs with two 3D clocks)
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 3d
-    - 3d2 (Only required on SoCs with two 3D clocks)
-    - mc
-    - mc2 (Only required on SoCs with two 3D clocks)
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR3D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandles to 3D or core power domain.
-
-- dc: display controller
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dc"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dc
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dc
-  - nvidia,head: The number of the display controller head. This is used to
-    setup the various types of output to receive video data from the given
-    head.
-
-  Each display controller node has a child node, named "rgb", that represents
-  the RGB output associated with the controller. It can take the following
-  optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - interconnects: Must contain entry for the DC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to core power domain.
-
-- hdmi: High Definition Multimedia Interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-hdmi"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - hdmi-supply: supply for the +5V HDMI connector pin
-  - vdd-supply: regulator for supply voltage
-  - pll-supply: regulator for PLL
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - hdmi
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - hdmi
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-
-- tvo: TV encoder output
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-tvo"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-
-  Optional properties:
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-  - power-domains: Phandle to core power domain.
-
-- dsi: display serial interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dsi"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dsi
-      This MUST be the first entry.
-    - lp
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dsi
-  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
-  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
-    which pads are used by this DSI output and need to be calibrated. See also
-    ../display/tegra/nvidia,tegra114-mipi.txt.
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
-    up with in order to support up to 8 data lanes
-  - operating-points-v2: See ../bindings/opp/opp.txt for details.
-
-- sor: serial output resource
-
-  Required properties:
-  - compatible: Should be:
-    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
-    - "nvidia,tegra132-sor": for Tegra132
-    - "nvidia,tegra210-sor": for Tegra210
-    - "nvidia,tegra210-sor1": for Tegra210
-    - "nvidia,tegra186-sor": for Tegra186
-    - "nvidia,tegra186-sor1": for Tegra186
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - sor: clock input for the SOR hardware
-    - out: SOR output clock
-    - parent: input for the pixel clock
-    - dp: reference clock for the SOR clock
-    - safe: safe reference for the SOR clock during power up
-
-    For Tegra186 and later:
-    - pad: SOR pad output clock (on Tegra186 and later)
-
-    Obsolete:
-    - source: source clock for the SOR clock (obsolete, use "out" instead)
-
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - sor
-
-  Required properties on Tegra186 and later:
-  - nvidia,interface: index of the SOR interface
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
-    of the SOR, identified by the cell's index, is mapped via the crossbar to
-    the pad specified by the cell's value.
-
-  Optional properties when driving an eDP output:
-  - nvidia,dpaux: phandle to a DispayPort AUX interface
-
-- dpaux: DisplayPort AUX interface
-  - compatible : Should contain one of the following:
-    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
-    - "nvidia,tegra210-dpaux": for Tegra210
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dpaux: clock input for the DPAUX hardware
-    - parent: reference clock
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dpaux
-  - vdd-supply: phandle of a supply that powers the DisplayPort link
-  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
-    must be always present. If there are no I2C slave devices, an empty
-    node should be added. See ../../i2c/i2c.txt for more information.
-
-  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
-  regarding the DPAUX pad controller bindings.
-
-- vic: Video Image Compositor
-  - compatible : "nvidia,tegra<chip>-vic"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - vic: clock input for the VIC hardware
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - vic
-
-  Optional properties:
-  - interconnects: Must contain entry for the VIC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-Example:
-
-/ {
-	...
-
-	host1x {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <0 65 0x04   /* mpcore syncpt */
-			      0 67 0x04>; /* mpcore general */
-		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-		operating-points-v2 = <&dvfs_opp_table>;
-		power-domains = <&domain>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe {
-			compatible = "nvidia,tegra20-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <0 68 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-			operating-points-v2 = <&dvfs_opp_table>;
-			power-domains = <&domain>;
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra210-vi";
-			reg = <0x0 0x54080000 0x0 0x700>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
-			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
-			operating-points-v2 = <&dvfs_opp_table>;
-
-			clocks = <&tegra_car TEGRA210_CLK_VI>;
-			power-domains = <&pd_venc>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0x0 0x0 0x54080000 0x2000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					imx219_vi_in0: endpoint {
-						remote-endpoint = <&imx219_csi_out0>;
-					};
-				};
-			};
-
-			csi@838 {
-				compatible = "nvidia,tegra210-csi";
-				reg = <0x838 0x1300>;
-				assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
-						  <&tegra_car TEGRA210_CLK_CILCD>,
-						  <&tegra_car TEGRA210_CLK_CILE>,
-						  <&tegra_car TEGRA210_CLK_CSI_TPG>;
-				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
-							 <&tegra_car TEGRA210_CLK_PLL_P>,
-							 <&tegra_car TEGRA210_CLK_PLL_P>;
-				assigned-clock-rates = <102000000>,
-						       <102000000>,
-						       <102000000>,
-						       <972000000>;
-
-				clocks = <&tegra_car TEGRA210_CLK_CSI>,
-					 <&tegra_car TEGRA210_CLK_CILAB>,
-					 <&tegra_car TEGRA210_CLK_CILCD>,
-					 <&tegra_car TEGRA210_CLK_CILE>,
-					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
-				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
-				power-domains = <&pd_sor>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				channel@0 {
-					reg = <0>;
-					nvidia,mipi-calibrate = <&mipi 0x001>;
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-							imx219_csi_in0: endpoint {
-								data-lanes = <1 2>;
-								remote-endpoint = <&imx219_out0>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-							imx219_csi_out0: endpoint {
-								remote-endpoint = <&imx219_vi_in0>;
-							};
-						};
-					};
-				};
-			};
-		};
-
-		epp {
-			compatible = "nvidia,tegra20-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <0 70 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-			operating-points-v2 = <&dvfs_opp_table>;
-			power-domains = <&domain>;
-		};
-
-		isp {
-			compatible = "nvidia,tegra20-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <0 71 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d {
-			compatible = "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <0 72 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-			operating-points-v2 = <&dvfs_opp_table>;
-			power-domains = <&domain>;
-		};
-
-		gr3d {
-			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-			operating-points-v2 = <&dvfs_opp_table>;
-			power-domains = <&domain>;
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <0 73 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-			operating-points-v2 = <&dvfs_opp_table>;
-			power-domains = <&domain>;
-
-			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
-					<&mc TEGRA20_MC_DISPLAY0B &emc>,
-					<&mc TEGRA20_MC_DISPLAY0C &emc>,
-					<&mc TEGRA20_MC_DISPLAYHC &emc>;
-			interconnect-names = "wina",
-					     "winb",
-					     "winc",
-					     "cursor";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <0 74 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-			operating-points-v2 = <&dvfs_opp_table>;
-			power-domains = <&domain>;
-
-			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
-					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
-					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
-					<&mc TEGRA20_MC_DISPLAYHCB &emc>;
-			interconnect-names = "wina",
-					     "winb",
-					     "winc",
-					     "cursor";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi {
-			compatible = "nvidia,tegra20-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <0 75 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-			operating-points-v2 = <&dvfs_opp_table>;
-		};
-
-		tvo {
-			compatible = "nvidia,tegra20-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <0 76 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_TVO>;
-			status = "disabled";
-			operating-points-v2 = <&dvfs_opp_table>;
-		};
-
-		dsi {
-			compatible = "nvidia,tegra20-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "dsi", "parent";
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-			operating-points-v2 = <&dvfs_opp_table>;
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 000000000000..913ca104c871
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,431 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+  representing one of the host1x client modules defined in this binding.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-host1x
+          - nvidia,tegra30-host1x
+          - nvidia,tegra114-host1x
+          - nvidia,tegra124-host1x
+          - nvidia,tegra210-host1x
+          - nvidia,tegra186-host1x
+          - nvidia,tegra194-host1x
+          - nvidia,tegra234-host1x
+
+      - items:
+          - const: nvidia,tegra132-host1x
+          - const: nvidia,tegra124-host1x
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 9
+
+  '#address-cells':
+    description: The number of cells used to represent physical base addresses
+      in the host1x address space.
+    enum: [1, 2]
+
+  '#size-cells':
+    description: The number of cells used to represent the size of an address
+      range in the host1x address space.
+    enum: [1, 2]
+
+  ranges:
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock. See
+      ../clocks/clock-bindings.txt for details.
+
+  clock-names:
+    items:
+      - const: host1x
+
+  resets:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - const: host1x
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client for host1x
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-host1x
+              - nvidia,tegra30-host1x
+              - nvidia,tegra114-host1x
+              - nvidia,tegra124-host1x
+              - nvidia,tegra210-host1x
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-host1x
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          maxItems: 1
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: common
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by host1x server
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt 0
+            - description: host1x syncpoint interrupt 1
+            - description: host1x syncpoint interrupt 2
+            - description: host1x syncpoint interrupt 3
+            - description: host1x syncpoint interrupt 4
+            - description: host1x syncpoint interrupt 5
+            - description: host1x syncpoint interrupt 6
+            - description: host1x syncpoint interrupt 7
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt0
+            - const: syncpt1
+            - const: syncpt2
+            - const: syncpt3
+            - const: syncpt4
+            - const: syncpt5
+            - const: syncpt6
+            - const: syncpt7
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra20-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <0 65 0x04>, /* mpcore syncpt */
+                     <0 67 0x04>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+        reset-names = "host1x", "mc";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x04000000>;
+
+        mpe@54040000 {
+            compatible = "nvidia,tegra20-mpe";
+            reg = <0x54040000 0x00040000>;
+            interrupts = <0 68 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_MPE>;
+            resets = <&tegra_car 60>;
+            reset-names = "mpe";
+        };
+
+        vi@54080000 {
+            compatible = "nvidia,tegra20-vi";
+            reg = <0x54080000 0x00040000>;
+            interrupts = <0 69 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_VI>;
+            resets = <&tegra_car 100>;
+            reset-names = "vi";
+        };
+
+        epp@540c0000 {
+            compatible = "nvidia,tegra20-epp";
+            reg = <0x540c0000 0x00040000>;
+            interrupts = <0 70 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_EPP>;
+            resets = <&tegra_car 19>;
+            reset-names = "epp";
+        };
+
+        isp@54100000 {
+            compatible = "nvidia,tegra20-isp";
+            reg = <0x54100000 0x00040000>;
+            interrupts = <0 71 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_ISP>;
+            resets = <&tegra_car 23>;
+            reset-names = "isp";
+        };
+
+        gr2d@54140000 {
+            compatible = "nvidia,tegra20-gr2d";
+            reg = <0x54140000 0x00040000>;
+            interrupts = <0 72 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+            resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+            reset-names = "2d", "mc";
+        };
+
+        gr3d@54180000 {
+            compatible = "nvidia,tegra20-gr3d";
+            reg = <0x54180000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+            resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+            reset-names = "3d", "mc";
+        };
+
+        dc@54200000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54200000 0x00040000>;
+            interrupts = <0 73 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+            clock-names = "dc";
+            resets = <&tegra_car 27>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        dc@54240000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54240000 0x00040000>;
+            interrupts = <0 74 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+            clock-names = "dc";
+            resets = <&tegra_car 26>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        hdmi@54280000 {
+            compatible = "nvidia,tegra20-hdmi";
+            reg = <0x54280000 0x00040000>;
+            interrupts = <0 75 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "hdmi", "parent";
+            resets = <&tegra_car 51>;
+            reset-names = "hdmi";
+
+            hdmi-supply = <&vdd_5v0_hdmi>;
+            pll-supply = <&vdd_hdmi_pll>;
+            vdd-supply = <&vdd_3v3_hdmi>;
+
+            nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+            nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+        };
+
+        tvo@542c0000 {
+            compatible = "nvidia,tegra20-tvo";
+            reg = <0x542c0000 0x00040000>;
+            interrupts = <0 76 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_TVO>;
+        };
+
+        dsi@54300000 {
+            compatible = "nvidia,tegra20-dsi";
+            reg = <0x54300000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "dsi", "parent";
+            resets = <&tegra_car 48>;
+            reset-names = "dsi";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra210-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra210-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x01000000>;
+        iommus = <&mc TEGRA_SWGROUP_HC>;
+
+        vi@54080000 {
+            compatible = "nvidia,tegra210-vi";
+            reg = <0x54080000 0x00000700>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+            clocks = <&tegra_car TEGRA210_CLK_VI>;
+            power-domains = <&pd_venc>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ranges = <0x0 0x54080000 0x2000>;
+
+            csi@838 {
+                compatible = "nvidia,tegra210-csi";
+                reg = <0x838 0x1300>;
+                assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                                  <&tegra_car TEGRA210_CLK_CILCD>,
+                                  <&tegra_car TEGRA210_CLK_CILE>,
+                                  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>;
+                assigned-clock-rates = <102000000>,
+                                       <102000000>,
+                                       <102000000>,
+                                       <972000000>;
+
+                clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                         <&tegra_car TEGRA210_CLK_CILAB>,
+                         <&tegra_car TEGRA210_CLK_CILCD>,
+                         <&tegra_car TEGRA210_CLK_CILE>,
+                         <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+                power-domains = <&pd_sor>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 000000000000..3bc3b22e98e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-isp
+      - nvidia,tegra30-isp
+      - nvidia,tegra210-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: isp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # write
+
+  power-domains:
+    items:
+      - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@54100000 {
+        compatible = "nvidia,tegra20-isp";
+        reg = <0x54100000 0x00040000>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+        resets = <&tegra_car 23>;
+        reset-names = "isp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 000000000000..5f4f0fb4b692
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mpe@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-mpe
+      - nvidia,tegra30-mpe
+      - nvidia,tegra114-mpe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: mpe
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 6
+
+  interconnect-names:
+    maxItems: 6
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mpe@54040000 {
+        compatible = "nvidia,tegra20-mpe";
+        reg = <0x54040000 0x00040000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+        resets = <&tegra_car 60>;
+        reset-names = "mpe";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 000000000000..467b015e5700
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^tvo@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-tvo
+      - nvidia,tegra30-tvo
+      - nvidia,tegra114-tvo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tvo@542c0000 {
+        compatible = "nvidia,tegra20-tvo";
+        reg = <0x542c0000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_TVO>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 000000000000..782a4b10150a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-vi
+      - const: nvidia,tegra30-vi
+      - const: nvidia,tegra114-vi
+      - const: nvidia,tegra124-vi
+      - items:
+          - const: nvidia,tegra132-vi
+          - const: nvidia,tegra124-vi
+      - const: nvidia,tegra210-vi
+      - const: nvidia,tegra186-vi
+      - const: nvidia,tegra194-vi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vi
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 5
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 5
+
+  operating-points-v2:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  power-domains:
+    items:
+      - description: phandle to the VENC power domain
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+patternProperties:
+  "^csi@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-vi
+              - nvidia,tegra30-vi
+              - nvidia,tegra114-vi
+              - nvidia,tegra124-vi
+    then:
+      required:
+        - resets
+        - reset-names
+    else:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra20-vi";
+        reg = <0x54080000 0x00040000>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_VI>;
+        resets = <&tegra_car 100>;
+        reset-names = "vi";
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra210-vi";
+        reg = <0x54080000 0x00000700>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+        clocks = <&tegra_car TEGRA210_CLK_VI>;
+        power-domains = <&pd_venc>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x0 0x54080000 0x2000>;
+
+        csi@838 {
+            compatible = "nvidia,tegra210-csi";
+            reg = <0x838 0x1300>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                              <&tegra_car TEGRA210_CLK_CILCD>,
+                              <&tegra_car TEGRA210_CLK_CILE>,
+                              <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>;
+            assigned-clock-rates = <102000000>,
+                                   <102000000>,
+                                   <102000000>,
+                                   <972000000>;
+
+            clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                     <&tegra_car TEGRA210_CLK_CILAB>,
+                     <&tegra_car TEGRA210_CLK_CILCD>,
+                     <&tegra_car TEGRA210_CLK_CILE>,
+                     <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+            power-domains = <&pd_sor>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 000000000000..fa07a40d1004
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^csi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: A/B lanes clock
+      - description: C/D lanes clock
+      - description: E lane clock
+      - description: test pattern generator clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: cilab
+      - const: cilcd
+      - const: cile
+      - const: csi_tpg
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 781c1868b0b8..5c7d2cbc4aac 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -88,8 +88,7 @@ properties:
           The DSS DPI output port node from video port 2
 
   ti,am65x-oldi-io-ctrl:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    $ref: "/schemas/types.yaml#/definitions/phandle"
     description:
       phandle to syscon device node mapping OLDI IO_CTRL registers.
       The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
index 83808199657b..26d0d8ab7984 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DMA Controller Device Tree Bindings
+title: Allwinner A10 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index b6e1ebfaf366..bd599bda2653 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 DMA Controller Device Tree Bindings
+title: Allwinner A64 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,9 +20,11 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun50i-a64-dma
-      - const: allwinner,sun50i-a100-dma
-      - const: allwinner,sun50i-h6-dma
+      - enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a64-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
       - items:
           - const: allwinner,sun8i-r40-dma
           - const: allwinner,sun50i-a64-dma
@@ -58,13 +60,14 @@ if:
   properties:
     compatible:
       enum:
+        - allwinner,sun20i-d1-dma
         - allwinner,sun50i-a100-dma
         - allwinner,sun50i-h6-dma
 
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
index a6df6f8b54db..344dc7e04931 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 DMA Controller Device Tree Bindings
+title: Allwinner A31 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
index b193ee2db4a7..b53ac7631a76 100644
--- a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Altera mSGDMA IP core
 
 maintainers:
-  - Olivier Dautricourt <olivier.dautricourt@orolia.com>
+  - Olivier Dautricourt <olivierdautricourt@gmail.com>
 
 description: |
   Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA)
diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
new file mode 100644
index 000000000000..3b1e667f7ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apple,admac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Audio DMA Controller (ADMAC)
+
+description: |
+  Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio samples
+  on SoCs from the "Apple Silicon" family.
+
+  The controller has been seen with up to 24 channels. Even-numbered channels
+  are TX-only, odd-numbered are RX-only. Individual channels are coupled to
+  fixed device endpoints.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-admac
+          - apple,t8103-admac
+      - const: apple,admac
+
+  reg:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      Clients specify a single cell with channel number.
+
+  dma-channels:
+    maximum: 24
+
+  interrupts:
+    minItems: 4
+    maxItems: 4
+    description:
+      Interrupts that correspond to the 4 IRQ outputs of the controller. Usually
+      only one of the controller outputs will be connected as an usable interrupt
+      source. The remaining interrupts will be left without a valid value, e.g.
+      in an interrupts-extended list the disconnected positions will contain
+      an empty phandle reference <0>.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#dma-cells'
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    aic: interrupt-controller {
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+
+    admac: dma-controller@238200000 {
+      compatible = "apple,t8103-admac", "apple,admac";
+      reg = <0x38200000 0x34000>;
+      dma-channels = <24>;
+      interrupts-extended = <0>,
+                            <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+                            <0>,
+                            <0>;
+      #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
new file mode 100644
index 000000000000..4a3dd6f5309b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+  between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl330
+  required:
+    - compatible
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl330
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+    description: A single combined interrupt or an interrupt per event
+
+  '#dma-cells':
+    const: 1
+    description: Contains the DMA request number for the consumer
+
+  arm,pl330-broken-no-flushp:
+    type: boolean
+    description: quirk for avoiding to execute DMAFLUSHP
+
+  arm,pl330-periph-burst:
+    type: boolean
+    description: quirk for performing burst transfer only
+
+  dma-coherent: true
+
+  iommus:
+    minItems: 1
+    maxItems: 9
+    description: Up to 1 IOMMU entry per DMA channel for writes and 1
+      IOMMU entry for reads.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dma
+      - const: dma-ocp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@12680000 {
+        compatible = "arm,pl330", "arm,primecell";
+        reg = <0x12680000 0x1000>;
+        interrupts = <99>;
+        #dma-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
index 3bd9eea543ca..9193b18fb75f 100644
--- a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
@@ -10,6 +10,7 @@ maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
+  - $ref: /schemas/arm/primecell.yaml#
   - $ref: "dma-controller.yaml#"
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
@@ -89,6 +90,9 @@ properties:
       - 64
     description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
 
+  resets:
+    maxItems: 1
+
 required:
   - reg
   - interrupts
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
deleted file mode 100644
index 315e90122afa..000000000000
--- a/Documentation/devicetree/bindings/dma/arm-pl330.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* ARM PrimeCell PL330 DMA Controller
-
-The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
-between memory and peripherals or memory to memory.
-
-Required properties:
-  - compatible: should include both "arm,pl330" and "arm,primecell".
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-
-Optional properties:
-  - dma-coherent      : Present if dma operations are coherent
-  - #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-  - dma-channels: contains the total number of DMA channels supported by the DMAC
-  - dma-requests: contains the total number of DMA requests supported by the DMAC
-  - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP
-  - arm,pl330-periph-burst: quirk for performing burst transfer only
-  - resets: contains an entry for each entry in reset-names.
-	    See ../reset/reset.txt for details.
-  - reset-names: must contain at least "dma", and optional is "dma-ocp".
-
-Example:
-
-	pdma0: pdma@12680000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12680000 0x1000>;
-		interrupts = <99>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers and dma channel names
-as shown below.
-
-  [property name]  = <[phandle of the dma controller] [dma request id]>;
-  [property name]  = <[dma channel name]>
-
-      where 'dma request id' is the dma request number which is connected
-      to the client controller. The 'property name' 'dmas' and 'dma-names'
-      as required by the generic dma device tree binding helpers. The dma
-      names correspond 1:1 with the dma request ids in the dmas property.
-
-  Example:  dmas = <&pdma0 12
-		    &pdma1 11>;
-	    dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
index 0043b91da95e..6d3727267fa8 100644
--- a/Documentation/devicetree/bindings/dma/dma-controller.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -24,10 +24,10 @@ examples:
     dma: dma-controller@48000000 {
         compatible = "ti,omap-sdma";
         reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4
-                      0 13 0x4
-                      0 14 0x4
-                      0 15 0x4>;
+        interrupts = <0 12 0x4>,
+                     <0 13 0x4>,
+                     <0 14 0x4>,
+                     <0 15 0x4>;
         #dma-cells = <1>;
         dma-channels = <32>;
         dma-requests = <127>;
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
index e72748496fd9..4b817f5dc30e 100644
--- a/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -24,6 +24,8 @@ properties:
 
   dma-masters:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to the DMA controllers the router can direct
       the signal to.
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
new file mode 100644
index 000000000000..050e6cd57727
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale enhanced Direct Memory Access(eDMA) Controller
+
+description: |
+  The eDMA channels have multiplex capability by programmable
+  memory-mapped registers. channels are split into two groups, called
+  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
+  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-edma
+          - fsl,imx7ulp-edma
+      - items:
+          - const: fsl,ls1028a-edma
+          - const: fsl,vf610-edma
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  interrupts:
+    minItems: 2
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 2
+    maxItems: 17
+
+  "#dma-cells":
+    const: 2
+
+  dma-channels:
+    const: 32
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  big-endian:
+    description: |
+      If present registers and hardware scatter/gather descriptors of the
+      eDMA are implemented in big endian mode, otherwise in little mode.
+    type: boolean
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dma-channels
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-edma
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: edma-tx
+            - const: edma-err
+        reg:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7ulp-edma
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: dma
+            - const: dmamux0
+        interrupts:
+          maxItems: 17
+        reg:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    edma0: dma-controller@40018000 {
+      #dma-cells = <2>;
+      compatible = "fsl,vf610-edma";
+      reg = <0x40018000 0x2000>,
+            <0x40024000 0x1000>,
+            <0x40025000 0x1000>;
+      interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "edma-tx", "edma-err";
+      dma-channels = <32>;
+      clock-names = "dmamux0", "dmamux1";
+      clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    edma1: dma-controller@40080000 {
+      #dma-cells = <2>;
+      compatible = "fsl,imx7ulp-edma";
+      reg = <0x40080000 0x2000>,
+            <0x40210000 0x1000>;
+      dma-channels = <32>;
+      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                   /* last is eDMA2-ERR interrupt */
+                   <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+       clock-names = "dma", "dmamux0";
+       clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
deleted file mode 100644
index ee1754739b4b..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Freescale enhanced Direct Memory Access(eDMA) Controller
-
-  The eDMA channels have multiplex capability by programmble memory-mapped
-registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
-specific DMA request source can only be multiplexed by any channel of certain
-group, DMAMUX0 or DMAMUX1, but not both.
-
-* eDMA Controller
-Required properties:
-- compatible :
-	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
-	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
-	  LS1028A SoC.
-- reg : Specifies base physical address(s) and size of the eDMA registers.
-	The 1st region is eDMA control register's address and size.
-	The 2nd and the 3rd regions are programmable channel multiplexing
-	control register's address and size.
-- interrupts : A list of interrupt-specifiers, one for each entry in
-	interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel
-	per transmission interrupt, total 16 channel interrupt and 1
-	error interrupt(located in the last), no interrupt-names list on
-	i.mx7ulp for clean on dts.
-- #dma-cells : Must be <2>.
-	The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
-	Specific request source can only be multiplexed by specific channels
-	group called DMAMUX.
-	The 2nd cell specifies the request source(slot) ID.
-	See the SoC's reference manual for all the supported request sources.
-- dma-channels : Number of channels supported by the controller
-- clock-names : A list of channel group clock names. Should contain:
-	"dmamux0" - clock name of mux0 group
-	"dmamux1" - clock name of mux1 group
-	Note: No dmamux0 on i.mx7ulp, but another 'dma' clk added on i.mx7ulp.
-- clocks : A list of phandle and clock-specifier pairs, one for each entry in
-	clock-names.
-
-Optional properties:
-- big-endian: If present registers and hardware scatter/gather descriptors
-	of the eDMA are implemented in big endian mode, otherwise in little
-	mode.
-- interrupt-names : Should contain the below on vf610 similar SoC but not used
-	on i.mx7ulp similar SoC:
-	"edma-tx" - the transmission interrupt
-	"edma-err" - the error interrupt
-
-
-Examples:
-
-edma0: dma-controller@40018000 {
-	#dma-cells = <2>;
-	compatible = "fsl,vf610-edma";
-	reg = <0x40018000 0x2000>,
-		<0x40024000 0x1000>,
-		<0x40025000 0x1000>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-		<0 9 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "edma-tx", "edma-err";
-	dma-channels = <32>;
-	clock-names = "dmamux0", "dmamux1";
-	clocks = <&clks VF610_CLK_DMAMUX0>,
-		<&clks VF610_CLK_DMAMUX1>;
-}; /* vf610 */
-
-edma1: dma-controller@40080000 {
-	#dma-cells = <2>;
-	compatible = "fsl,imx7ulp-edma";
-	reg = <0x40080000 0x2000>,
-		<0x40210000 0x1000>;
-	dma-channels = <32>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     /* last is eDMA2-ERR interrupt */
-		     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "dma", "dmamux0";
-	clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
-		 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
-}; /* i.mx7ulp */
-
-* DMA clients
-DMA client drivers that uses the DMA function must use the format described
-in the dma.txt file, using a two-cell specifier for each channel: the 1st
-specifies the channel group(DMAMUX) in which this request can be multiplexed,
-and the 2nd specifies the request source.
-
-Examples:
-
-sai2: sai@40031000 {
-	compatible = "fsl,vf610-sai";
-	reg = <0x40031000 0x1000>;
-	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "sai";
-	clocks = <&clks VF610_CLK_SAI2>;
-	dma-names = "tx", "rx";
-	dmas = <&edma0 0 21>,
-		<&edma0 0 20>;
-};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
index 7bd8847d6394..1c9929d53727 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -13,8 +13,10 @@ Required properties:
 - #dma-cells : Has to be 1. imx-dma does not support anything else.
 
 Optional properties:
-- #dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-requests : Number of DMA requests supported.
+- dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-channels : deprecated
+- dma-requests : Number of DMA requests supported.
+- #dma-requests : deprecated
 
 Example:
 
@@ -23,7 +25,7 @@ Example:
 		reg = <0x10001000 0x1000>;
 		interrupts = <32 33>;
 		#dma-cells = <1>;
-		#dma-channels = <16>;
+		dma-channels = <16>;
 	};
 
 
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
index dc059d6fd037..3b0b3b919af8 100644
--- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -14,15 +14,23 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - ingenic,jz4740-dma
-      - ingenic,jz4725b-dma
-      - ingenic,jz4760-dma
-      - ingenic,jz4760b-dma
-      - ingenic,jz4770-dma
-      - ingenic,jz4780-dma
-      - ingenic,x1000-dma
-      - ingenic,x1830-dma
+    oneOf:
+      - enum:
+          - ingenic,jz4740-dma
+          - ingenic,jz4725b-dma
+          - ingenic,jz4760-dma
+          - ingenic,jz4760-bdma
+          - ingenic,jz4760-mdma
+          - ingenic,jz4760b-dma
+          - ingenic,jz4760b-bdma
+          - ingenic,jz4760b-mdma
+          - ingenic,jz4770-dma
+          - ingenic,jz4780-dma
+          - ingenic,x1000-dma
+          - ingenic,x1830-dma
+      - items:
+          - const: ingenic,jz4770-bdma
+          - const: ingenic,jz4760b-bdma
 
   reg:
     items:
@@ -36,13 +44,19 @@ properties:
     maxItems: 1
 
   "#dma-cells":
-    const: 2
+    enum: [2, 3]
     description: >
       DMA clients must use the format described in dma.txt, giving a phandle
-      to the DMA controller plus the following 2 integer cells:
-
-      - Request type: The DMA request type for transfers to/from the
-        device on the allocated channel, as defined in the SoC documentation.
+      to the DMA controller plus the following integer cells:
+
+      - Request type: The DMA request type specifies the device endpoint that
+        will be the source or destination of the DMA transfer.
+        If "#dma-cells" is 2, the request type is a single cell, and the
+        direction will be unidirectional (either RX or TX but not both).
+        If "#dma-cells" is 3, the request type has two cells; the first
+        one corresponds to the host to device direction (TX), the second one
+        corresponds to the device to host direction (RX). The DMA channel is
+        then bidirectional.
 
       - Channel: If set to 0xffffffff, any available channel will be allocated
         for the client. Otherwise, the exact channel specified will be used.
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 000000000000..9ab4d81ead35
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+  - Long Cheng <long.cheng@mediatek.com>
+
+description: |
+  The MediaTek UART APDMA controller provides DMA capabilities
+  for the UART peripheral bus.
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-uart-dma
+              - mediatek,mt6795-uart-dma
+              - mediatek,mt8365-uart-dma
+              - mediatek,mt8516-uart-dma
+          - const: mediatek,mt6577-uart-dma
+      - enum:
+          - mediatek,mt6577-uart-dma
+
+  reg:
+    minItems: 1
+    maxItems: 16
+
+  interrupts:
+    description: |
+      TX, RX interrupt lines for each UART APDMA channel
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    description: Must contain one entry for the APDMA main clock
+    maxItems: 1
+
+  clock-names:
+    const: apdma
+
+  "#dma-cells":
+    const: 1
+    description: |
+      The first cell specifies the UART APDMA channel number
+
+  dma-requests:
+    description: |
+      Number of virtual channels of the UART APDMA controller
+    maximum: 16
+
+  mediatek,dma-33bits:
+    type: boolean
+    description: Enable 33-bits UART APDMA support
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  not:
+    required:
+      - dma-requests
+then:
+  properties:
+    interrupts:
+      maxItems: 8
+    reg:
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt2712-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        apdma: dma-controller@11000400 {
+            compatible = "mediatek,mt2712-uart-dma",
+                         "mediatek,mt6577-uart-dma";
+            reg = <0 0x11000400 0 0x80>,
+                  <0 0x11000480 0 0x80>,
+                  <0 0x11000500 0 0x80>,
+                  <0 0x11000580 0 0x80>,
+                  <0 0x11000600 0 0x80>,
+                  <0 0x11000680 0 0x80>,
+                  <0 0x11000700 0 0x80>,
+                  <0 0x11000780 0 0x80>,
+                  <0 0x11000800 0 0x80>,
+                  <0 0x11000880 0 0x80>,
+                  <0 0x11000900 0 0x80>,
+                  <0 0x11000980 0 0x80>;
+            interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+            dma-requests = <12>;
+            clocks = <&pericfg CLK_PERI_AP_DMA>;
+            clock-names = "apdma";
+            mediatek,dma-33bits;
+            #dma-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
index 8f7364a7b349..ec18bf0a802a 100644
--- a/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -10,10 +10,12 @@ Required properties:
 		or one irq for pdma device
 
 Optional properties:
-- #dma-channels: Number of DMA channels supported by the controller (defaults
+- dma-channels: Number of DMA channels supported by the controller (defaults
   to 32 when not specified)
-- #dma-requests: Number of DMA requestor lines supported by the controller
+- #dma-channels: deprecated
+- dma-requests: Number of DMA requestor lines supported by the controller
   (defaults to 32 when not specified)
+- #dma-requests: deprecated
 
 "marvell,pdma-1.0"
 Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
@@ -33,7 +35,7 @@ pdma: dma-controller@d4000000 {
 	      reg = <0xd4000000 0x10000>;
 	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
 	      interrupt-parent = <&intcmux32>;
-	      #dma-channels = <16>;
+	      dma-channels = <16>;
       };
 
 /*
@@ -45,7 +47,7 @@ pdma: dma-controller@d4000000 {
 	      compatible = "marvell,pdma-1.0";
 	      reg = <0xd4000000 0x10000>;
 	      interrupts = <47>;
-	      #dma-channels = <16>;
+	      dma-channels = <16>;
       };
 
 
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
deleted file mode 100644
index fef9c1eeb264..000000000000
--- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
-  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
-  * "mediatek,mt8516-uart-dma", "mediatek,mt6577" for MT8516 SoC
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
- One interrupt per dma-requests, or 8 if no dma-requests property is present
-
-- dma-requests: The number of DMA channels
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-- mediatek,dma-33bits: Present if the DMA requires support
-
-Examples:
-
-	apdma: dma-controller@11000400 {
-		compatible = "mediatek,mt2712-uart-dma",
-			     "mediatek,mt6577-uart-dma";
-		reg = <0 0x11000400 0 0x80>,
-		      <0 0x11000480 0 0x80>,
-		      <0 0x11000500 0 0x80>,
-		      <0 0x11000580 0 0x80>,
-		      <0 0x11000600 0 0x80>,
-		      <0 0x11000680 0 0x80>,
-		      <0 0x11000700 0 0x80>,
-		      <0 0x11000780 0 0x80>,
-		      <0 0x11000800 0 0x80>,
-		      <0 0x11000880 0 0x80>,
-		      <0 0x11000900 0 0x80>,
-		      <0 0x11000980 0 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
-		dma-requests = <12>;
-		clocks = <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "apdma";
-		mediatek,dma-33bits;
-		#dma-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
new file mode 100644
index 000000000000..c8894476b6ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPC DMA Controller
+
+description: |
+  The Tegra General Purpose Central (GPC) DMA controller is used for faster
+  data transfers between memory to memory, memory to device and device to
+  memory.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Rajesh Gumasta <rgumasta@nvidia.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-gpcdma
+      - items:
+          - enum:
+              - nvidia,tegra234-gpcdma
+              - nvidia,tegra194-gpcdma
+          - const: nvidia,tegra186-gpcdma
+
+  "#dma-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 31
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: gpcdma
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - "#dma-cells"
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dma-controller@2600000 {
+        compatible = "nvidia,tegra186-gpcdma";
+        reg = <0x2600000 0x210000>;
+        resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+        reset-names = "gpcdma";
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+        dma-coherent;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
index 5c2e2f156e31..fef804565b88 100644
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -23,7 +23,9 @@ properties:
           - nvidia,tegra210-adma
           - nvidia,tegra186-adma
       - items:
-          - const: nvidia,tegra194-adma
+          - enum:
+              - nvidia,tegra234-adma
+              - nvidia,tegra194-adma
           - const: nvidia,tegra186-adma
 
   reg:
diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000000..6a9d7bc74aff
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  QCOM ADM DMA controller provides DMA capabilities for
+  peripheral buses such as NAND and SPI.
+
+properties:
+  compatible:
+    const: qcom,adm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: phandle to the core clock
+      - description: phandle to the iface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    items:
+      - description: phandle to the clk reset
+      - description: phandle to the pbus reset
+      - description: phandle to the c0 reset
+      - description: phandle to the c1 reset
+      - description: phandle to the c2 reset
+
+  reset-names:
+    items:
+      - const: clk
+      - const: pbus
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: indicates the security domain identifier used in the secure world.
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - qcom,ee
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma-controller@18300000 {
+        compatible = "qcom,adm";
+        reg = <0x18300000 0x100000>;
+        interrupts = <0 170 0>;
+        #dma-cells = <1>;
+
+        clocks = <&gcc ADM0_CLK>,
+                  <&gcc ADM0_PBUS_CLK>;
+        clock-names = "core", "iface";
+
+        resets = <&gcc ADM0_RESET>,
+                  <&gcc ADM0_PBUS_RESET>,
+                  <&gcc ADM0_C0_RESET>,
+                  <&gcc ADM0_C1_RESET>,
+                  <&gcc ADM0_C2_RESET>;
+        reset-names = "clk", "pbus", "c0", "c1", "c2";
+        qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 000000000000..003098caf709
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+        # APQ8064, IPQ8064 and MSM8960
+      - qcom,bam-v1.3.0
+        # MSM8974, APQ8074 and APQ8084
+      - qcom,bam-v1.4.0
+        # MSM8916 and SDM845
+      - qcom,bam-v1.7.0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bam_clk
+
+  "#dma-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 4
+
+  num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of DMA channels in a remotely controlled bam.
+
+  qcom,controlled-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is controlled by remote proccessor i.e. execution
+      environment.
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      Indicates the active Execution Environment identifier (0-7) used in the
+      secure world.
+
+  qcom,num-ees:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of Execution Environments in a remotely
+      controlled bam.
+
+  qcom,powered-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is powered up by a remote processor but must be
+      initialized by the local processor.
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#dma-cells"
+  - interrupts
+  - qcom,ee
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    dma-controller@f9944000 {
+        compatible = "qcom,bam-v1.4.0";
+        reg = <0xf9944000 0x19000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+        clock-names = "bam_clk";
+        #dma-cells = <1>;
+        qcom,ee = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index e614fe3187bb..eabf8a76d3a0 100644
--- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -19,9 +19,13 @@ allOf:
 properties:
   compatible:
     enum:
+      - qcom,sc7280-gpi-dma
       - qcom,sdm845-gpi-dma
+      - qcom,sm6350-gpi-dma
       - qcom,sm8150-gpi-dma
       - qcom,sm8250-gpi-dma
+      - qcom,sm8350-gpi-dma
+      - qcom,sm8450-gpi-dma
 
   reg:
     maxItems: 1
@@ -29,6 +33,7 @@ properties:
   interrupts:
     description:
       Interrupt lines for each GPI instance
+    minItems: 1
     maxItems: 13
 
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
deleted file mode 100644
index 9d3b2f917b7b..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-QCOM ADM DMA Controller
-
-Required properties:
-- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
-- reg: Address range for DMA registers
-- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
-  denotes CRCI (client rate control interface) flow control assignment.
-- clocks: Should contain the core clock and interface clock.
-- clock-names: Must contain "core" for the core clock and "iface" for the
-  interface clock.
-- resets: Must contain an entry for each entry in reset names.
-- reset-names: Must include the following entries:
-  - clk
-  - c0
-  - c1
-  - c2
-- qcom,ee: indicates the security domain identifier used in the secure world.
-
-Example:
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
-			#dma-cells = <2>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				<&gcc ADM0_C0_RESET>,
-				<&gcc ADM0_C1_RESET>,
-				<&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "c0", "c1", "c2";
-			qcom,ee = <0>;
-		};
-
-DMA clients must use the format descripted in the dma.txt file, using a three
-cell specifier for each channel.
-
-Each dmas request consists of 3 cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
-    The CRCI is used for flow control.  It identifies the peripheral device that
-    is the source/destination for the transferred data.
-
-Example:
-
-	spi4: spi@1a280000 {
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		dmas = <&adm_dma 6 9>,
-			<&adm_dma 5 10>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
deleted file mode 100644
index 6e9a5497b3f2..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-QCOM BAM DMA controller
-
-Required properties:
-- compatible: must be one of the following:
- * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
- * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- * "qcom,bam-v1.7.0" for MSM8916
-- reg: Address range for DMA registers
-- interrupts: Should contain the one interrupt shared by all channels
-- #dma-cells: must be <1>, the cell in the dmas property of the client device
-  represents the channel number
-- clocks: required clock
-- clock-names: must contain "bam_clk" entry
-- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
-  the secure world.
-- qcom,controlled-remotely : optional, indicates that the bam is controlled by
-  remote proccessor i.e. execution environment.
-- qcom,powered-remotely : optional, indicates that the bam is powered up by
-  a remote processor but must be initialized by the local processor.
-- num-channels : optional, indicates supported number of DMA channels in a
-  remotely controlled bam.
-- qcom,num-ees : optional, indicates supported number of Execution Environments
-  in a remotely controlled bam.
-
-Example:
-
-	uart-bam: dma@f9984000 = {
-		compatible = "qcom,bam-v1.4.0";
-		reg = <0xf9984000 0x15000>;
-		interrupts = <0 94 0>;
-		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
-		clock-names = "bam_clk";
-		#dma-cells = <1>;
-		qcom,ee = <0>;
-	};
-
-DMA clients must use the format described in the dma.txt file, using a two cell
-specifier for each channel.
-
-Example:
-	serial@f991e000 {
-		compatible = "qcom,msm-uart";
-		reg = <0xf991e000 0x1000>
-			<0xf9944000 0x19000>;
-		interrupts = <0 108 0>;
-		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-			<&gcc GCC_BLSP1_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&uart-bam 0>, <&uart-bam 1>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
index d8142cbd13d3..89b591a05bce 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -42,7 +42,11 @@ properties:
           - const: renesas,rcar-dmac
 
       - items:
-          - const: renesas,dmac-r8a779a0 # R-Car V3U
+          - enum:
+              - renesas,dmac-r8a779a0     # R-Car V3U
+              - renesas,dmac-r8a779f0     # R-Car S4-8
+              - renesas,dmac-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-dmac # R-Car Gen4
 
   reg: true
 
@@ -117,7 +121,7 @@ if:
     compatible:
       contains:
         enum:
-          - renesas,dmac-r8a779a0
+          - renesas,rcar-gen4-dmac
 then:
   properties:
     reg:
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
index 7a4f415d74dc..1e25c5b0fb4d 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L DMA Controller
+title: Renesas RZ/{G2L,G2UL,V2L} DMA Controller
 
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
@@ -16,7 +16,9 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-dmac # RZ/G2UL
           - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+          - renesas,r9a07g054-dmac # RZ/V2L
       - const: renesas,rz-dmac
 
   reg:
diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 000000000000..d83013b0dd74
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "dma-router.yaml#"
+
+properties:
+  compatible:
+    const: renesas,rzn1-dmamux
+
+  reg:
+    maxItems: 1
+    description: DMA mux first register offset within the system control parent.
+
+  '#dma-cells':
+    const: 6
+    description:
+      The first four cells are dedicated to the master DMA controller. The fifth
+      cell gives the DMA mux bit index that must be set starting from 0. The
+      sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+  dma-masters:
+    minItems: 1
+    maxItems: 2
+
+  dma-requests:
+    const: 32
+
+required:
+  - reg
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@a0 {
+      compatible = "renesas,rzn1-dmamux";
+      reg = <0xa0 4>;
+      #dma-cells = <6>;
+      dma-masters = <&dma0 &dma1>;
+      dma-requests = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index d32a71b975fe..3271755787b4 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -22,10 +22,21 @@ description: |
 
   https://static.dev.sifive.com/FU540-C000-v1.0.pdf
 
+allOf:
+  - $ref: "dma-controller.yaml#"
+
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-pdma
+      - enum:
+          - sifive,fu540-c000-pdma
+      - const: sifive,pdma0
+    description:
+      Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the
+      SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block
+      with no chip integration tweaks.
 
   reg:
     maxItems: 1
@@ -34,6 +45,12 @@ properties:
     minItems: 1
     maxItems: 8
 
+  dma-channels:
+    description: For backwards-compatibility, the default value is 4
+    minimum: 1
+    maximum: 4
+    default: 4
+
   '#dma-cells':
     const: 1
 
@@ -41,16 +58,16 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#dma-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    dma@3000000 {
-      compatible = "sifive,fu540-c000-pdma";
+    dma-controller@3000000 {
+      compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
       reg = <0x3000000 0x8000>;
-      interrupts = <23 24 25 26 27 28 29 30>;
+      dma-channels = <4>;
+      interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
       #dma-cells = <1>;
     };
 
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index 6b35089ac017..c13649bf7f19 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -15,7 +15,13 @@ allOf:
 
 properties:
   compatible:
-    const: snps,dma-spear1340
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
+
 
   "#dma-cells":
     minimum: 3
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
index 79e241498e25..67aa7bb6d36a 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -34,7 +34,12 @@ properties:
       - const: axidma_apb_regs
 
   interrupts:
-    maxItems: 1
+    description:
+      If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+      will be per-channel interrupts. Otherwise, this is a single combined IRQ
+      for all channels.
+    minItems: 1
+    maxItems: 8
 
   clocks:
     items:
@@ -53,6 +58,9 @@ properties:
     minimum: 1
     maximum: 8
 
+  resets:
+    maxItems: 1
+
   snps,dma-masters:
     description: |
       Number of AXI masters supported by the hardware.
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
index adccea9941f1..c7e9b5fd50e7 100644
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -8,10 +8,13 @@ Required properties:
 - interrupts: Should contain one interrupt shared by all channel.
 - #dma-cells: must be <1>. Used to represent the number of integer
 	cells in the dmas property of client device.
-- #dma-channels : Number of DMA channels supported. Should be 32.
+- dma-channels : Number of DMA channels supported. Should be 32.
 - clock-names: Should contain the clock of the DMA controller.
 - clocks: Should contain a clock specifier for each entry in clock-names.
 
+Deprecated properties:
+- #dma-channels : Number of DMA channels supported. Should be 32.
+
 Example:
 
 Controller:
@@ -20,7 +23,7 @@ apdma: dma-controller@20100000 {
 	reg = <0x20100000 0x4000>;
 	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 	#dma-cells = <1>;
-	#dma-channels = <32>;
+	dma-channels = <32>;
 	clock-names = "enable";
 	clocks = <&clk_ap_ahb_gates 5>;
 };
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index f751796531c9..1e1d8549b7ef 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -46,9 +46,8 @@ examples:
       #dma-cells = <3>;
       dma-requests = <128>;
       dma-channels = <16>;
-      dma-masters = <&dma1 &dma2>;
+      dma-masters = <&dma1>, <&dma2>;
       clocks = <&timer_clk>;
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
index 87b4afd2cf62..00cfa3913652 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -104,4 +104,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
deleted file mode 100644
index 99ab5c4d331e..000000000000
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-* DMA40 DMA Controller
-
-Required properties:
-- compatible: "stericsson,dma40"
-- reg: Address range of the DMAC registers
-- reg-names: Names of the above areas to use during resource look-up
-- interrupt: Should contain the DMAC interrupt number
-- #dma-cells: must be <3>
-- memcpy-channels: Channels to be used for memcpy
-
-Optional properties:
-- dma-channels: Number of channels supported by hardware - if not present
-		the driver will attempt to obtain the information from H/W
-- disabled-channels: Channels which can not be used
-
-Example:
-
-	dma: dma-controller@801c0000 {
-		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-		reg = <0x801C0000 0x1000  0x40010000 0x800>;
-		reg-names = "base", "lcpa";
-		interrupt-parent = <&intc>;
-		interrupts = <0 25 0x4>;
-
-		#dma-cells = <2>;
-		memcpy-channels  = <56 57 58 59 60>;
-		disabled-channels  = <12>;
-		dma-channels = <8>;
-	};
-
-Clients
-Required properties:
-- dmas: Comma separated list of dma channel requests
-- dma-names: Names of the aforementioned requested channels
-
-Each dmas request consists of 4 cells:
-  1. A phandle pointing to the DMA controller
-  2. Device signal number, the signal line for single and burst requests
-     connected from the device to the DMA40 engine
-  3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianness
-     [NB: This list will grow]
-        0x00000001: Mode:
-                Logical channel when unset
-                Physical channel when set
-        0x00000002: Direction:
-                Memory to Device when unset
-                Device to Memory when set
-        0x00000004: Endianness:
-                Little endian when unset
-                Big endian when set
-        0x00000008: Use fixed channel:
-                Use automatic channel selection when unset
-                Use DMA request line number when set
-        0x00000010: Set channel as high priority:
-                Normal priority when unset
-                High priority when set
-
-Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
-bidirectional, i.e. the same for RX and TX operations:
-
-0:  SPI controller 0
-1:  SD/MMC controller 0 (unused)
-2:  SD/MMC controller 1 (unused)
-3:  SD/MMC controller 2 (unused)
-4:  I2C port 1
-5:  I2C port 3
-6:  I2C port 2
-7:  I2C port 4
-8:  Synchronous Serial Port SSP0
-9:  Synchronous Serial Port SSP1
-10: Multi-Channel Display Engine MCDE RX
-11: UART port 2
-12: UART port 1
-13: UART port 0
-14: Multirate Serial Port MSP2
-15: I2C port 0
-16: USB OTG in/out endpoints 7 & 15
-17: USB OTG in/out endpoints 6 & 14
-18: USB OTG in/out endpoints 5 & 13
-19: USB OTG in/out endpoints 4 & 12
-20: SLIMbus or HSI channel 0
-21: SLIMbus or HSI channel 1
-22: SLIMbus or HSI channel 2
-23: SLIMbus or HSI channel 3
-24: Multimedia DSP SXA0
-25: Multimedia DSP SXA1
-26: Multimedia DSP SXA2
-27: Multimedia DSP SXA3
-28: SD/MM controller 2
-29: SD/MM controller 0
-30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
-31: MSP port 0 or SLIMbus channel 0
-32: SD/MM controller 1
-33: SPI controller 2
-34: i2c3 RX2 TX2
-35: SPI controller 1
-36: USB OTG in/out endpoints 3 & 11
-37: USB OTG in/out endpoints 2 & 10
-38: USB OTG in/out endpoints 1 & 9
-39: USB OTG in/out endpoints 8
-40: SPI controller 3
-41: SD/MM controller 3
-42: SD/MM controller 4
-43: SD/MM controller 5
-44: Multimedia DSP SXA4
-45: Multimedia DSP SXA5
-46: SLIMbus channel 8 or Multimedia DSP SXA6
-47: SLIMbus channel 9 or Multimedia DSP SXA7
-48: Crypto Accelerator 1
-49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
-50: Hash Accelerator 1 TX
-51: memcpy TX (to be used by the DMA driver for memcpy operations)
-52: SLIMbus or HSI channel 4
-53: SLIMbus or HSI channel 5
-54: SLIMbus or HSI channel 6
-55: SLIMbus or HSI channel 7
-56: memcpy (to be used by the DMA driver for memcpy operations)
-57: memcpy (to be used by the DMA driver for memcpy operations)
-58: memcpy (to be used by the DMA driver for memcpy operations)
-59: memcpy (to be used by the DMA driver for memcpy operations)
-60: memcpy (to be used by the DMA driver for memcpy operations)
-61: Crypto Accelerator 0
-62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
-63: Hash Accelerator 0 TX
-
-Example:
-
-	uart@80120000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x80120000 0x1000>;
-		interrupts = <0 11 0x4>;
-
-		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
-		       <&dma 13 0 0x0>; /* Logical - MemToDev */
-		dma-names = "rx", "rx";
-
-	};
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
new file mode 100644
index 000000000000..8bddfb3b6fa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DMA40 DMA Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for DB8500 which is the only ASIC known to use DMA40:
+
+      0:  SPI controller 0
+      1:  SD/MMC controller 0 (unused)
+      2:  SD/MMC controller 1 (unused)
+      3:  SD/MMC controller 2 (unused)
+      4:  I2C port 1
+      5:  I2C port 3
+      6:  I2C port 2
+      7:  I2C port 4
+      8:  Synchronous Serial Port SSP0
+      9:  Synchronous Serial Port SSP1
+      10: Multi-Channel Display Engine MCDE RX
+      11: UART port 2
+      12: UART port 1
+      13: UART port 0
+      14: Multirate Serial Port MSP2
+      15: I2C port 0
+      16: USB OTG in/out endpoints 7 & 15
+      17: USB OTG in/out endpoints 6 & 14
+      18: USB OTG in/out endpoints 5 & 13
+      19: USB OTG in/out endpoints 4 & 12
+      20: SLIMbus or HSI channel 0
+      21: SLIMbus or HSI channel 1
+      22: SLIMbus or HSI channel 2
+      23: SLIMbus or HSI channel 3
+      24: Multimedia DSP SXA0
+      25: Multimedia DSP SXA1
+      26: Multimedia DSP SXA2
+      27: Multimedia DSP SXA3
+      28: SD/MMC controller 2
+      29: SD/MMC controller 0
+      30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+      31: MSP port 0 or SLIMbus channel 0
+      32: SD/MMC controller 1
+      33: SPI controller 2
+      34: i2c3 RX2 TX2
+      35: SPI controller 1
+      36: USB OTG in/out endpoints 3 & 11
+      37: USB OTG in/out endpoints 2 & 10
+      38: USB OTG in/out endpoints 1 & 9
+      39: USB OTG in/out endpoints 8
+      40: SPI controller 3
+      41: SD/MMC controller 3
+      42: SD/MMC controller 4
+      43: SD/MMC controller 5
+      44: Multimedia DSP SXA4
+      45: Multimedia DSP SXA5
+      46: SLIMbus channel 8 or Multimedia DSP SXA6
+      47: SLIMbus channel 9 or Multimedia DSP SXA7
+      48: Crypto Accelerator 1
+      49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+      50: Hash Accelerator 1 TX
+      51: memcpy TX (to be used by the DMA driver for memcpy operations)
+      52: SLIMbus or HSI channel 4
+      53: SLIMbus or HSI channel 5
+      54: SLIMbus or HSI channel 6
+      55: SLIMbus or HSI channel 7
+      56: memcpy (to be used by the DMA driver for memcpy operations)
+      57: memcpy (to be used by the DMA driver for memcpy operations)
+      58: memcpy (to be used by the DMA driver for memcpy operations)
+      59: memcpy (to be used by the DMA driver for memcpy operations)
+      60: memcpy (to be used by the DMA driver for memcpy operations)
+      61: Crypto Accelerator 0
+      62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+      63: Hash Accelerator 0 TX
+
+      The second cell is the DMA request line number. This is only used when
+      a fixed channel is allocated, and indicated by setting bit 3 in the
+      flags field (see below).
+
+      The third cell is a 32bit flags bitfield with the following possible
+      bits set:
+      0x00000001 (bit 0) - mode:
+        Logical channel when unset
+        Physical channel when set
+      0x00000002 (bit 1) - direction:
+        Memory to Device when unset
+        Device to Memory when set
+      0x00000004 (bit 2) - endianness:
+        Little endian when unset
+        Big endian when set
+      0x00000008 (bit 3) - use fixed channel:
+        Use automatic channel selection when unset
+        Use DMA request line number when set
+      0x00000010 (bit 4) - set channel as high priority:
+        Normal priority when unset
+        High priority when set
+
+  compatible:
+    items:
+      - const: stericsson,db8500-dma40
+      - const: stericsson,dma40
+
+  reg:
+    items:
+      - description: DMA40 memory base
+      - description: LCPA memory base
+
+  reg-names:
+    items:
+      - const: base
+      - const: lcpa
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  memcpy-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 elements indicating which channels on the DMA
+      engine are elegible for memcpy transfers
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - memcpy-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    dma-controller@801C0000 {
+      compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+      reg = <0x801C0000 0x1000>, <0x40010000 0x800>;
+      reg-names = "base", "lcpa";
+      interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+      #dma-cells = <3>;
+      memcpy-channels = <56 57 58 59 60>;
+      clocks = <&prcmu_clk PRCMU_DMACLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index b849a1ed389d..47e477cce6d2 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
 		"ti,am335x-edma-crossbar" for AM335x and AM437x
 - reg:		Memory map for accessing module
-- #dma-cells:	Should be set to to match with the DMA controller's dma-cells
+- #dma-cells:	Should be set to match with the DMA controller's dma-cells
 		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
 - dma-requests:	Number of DMA requests the crossbar can receive
 - dma-masters:	phandle pointing to the DMA controller
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index df29d59d13a8..08627d91e607 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -30,6 +30,7 @@ description: |
 
 allOf:
   - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
index ea19d12a9337..507d16d84ade 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -25,6 +25,7 @@ description: |
 
 allOf:
   - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 325aca52cd43..d1700a5c36bf 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -110,7 +110,11 @@ axi_vdma_0: axivdma@40030000 {
 Required properties:
 - dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
 	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
+	channel. For MCMDA, MM2S channel(write/tx) ID start from
+	'0' and is in [0-15] range. S2MM channel(read/rx) ID start
+	from '16' and is in [16-31] range. These channels ID are
+	fixed irrespective of IP configuration.
+
 - dma-names: a list of DMA channel names, one per "dmas" entry
 
 Example:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
new file mode 100644
index 000000000000..c0a1408b12ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DMA Engine
+
+description: |
+  The Xilinx ZynqMP DMA engine supports memory to memory transfers,
+  memory to device and device to memory transfers. It also has flow
+  control and rate control support for slave/peripheral dma access.
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+allOf:
+  - $ref: "../dma-controller.yaml#"
+
+properties:
+  "#dma-cells":
+    const: 1
+
+  compatible:
+    const: xlnx,zynqmp-dma-1.0
+
+  reg:
+    description: memory map for gdma/adma module access
+    maxItems: 1
+
+  interrupts:
+    description: DMA channel interrupt
+    maxItems: 1
+
+  clocks:
+    description: input clocks
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_main
+      - const: clk_apb
+
+  xlnx,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 64
+      - 128
+    description: AXI bus width in bits
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dma-coherent:
+    description: present if dma operations are coherent
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    fpd_dma_chan1: dma-controller@fd500000 {
+      compatible = "xlnx,zynqmp-dma-1.0";
+      reg = <0xfd500000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <0 117 0x4>;
+      #dma-cells = <1>;
+      clock-names = "clk_main", "clk_apb";
+      clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+      xlnx,bus-width = <128>;
+      dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
deleted file mode 100644
index 07a5a7aa9ea0..000000000000
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
-memory to device and device to memory transfers. It also has flow
-control and rate control support for slave/peripheral dma access.
-
-Required properties:
-- compatible		: Should be "xlnx,zynqmp-dma-1.0"
-- reg			: Memory map for gdma/adma module access.
-- interrupts		: Should contain DMA channel interrupt.
-- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
-- clock-names		: List of input clocks "clk_main", "clk_apb"
-			  (see clock bindings for details)
-
-Optional properties:
-- dma-coherent		: Present if dma operations are coherent.
-
-Example:
-++++++++
-fpd_dma_chan1: dma@fd500000 {
-	compatible = "xlnx,zynqmp-dma-1.0";
-	reg = <0x0 0xFD500000 0x1000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 117 4>;
-	clock-names = "clk_main", "clk_apb";
-	xlnx,bus-width = <128>;
-	dma-coherent;
-};
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index e66ef2da7879..9af40da5688e 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -20,6 +20,7 @@ properties:
       - fsl,imx8qxp-dsp
       - fsl,imx8qm-dsp
       - fsl,imx8mp-dsp
+      - fsl,imx8ulp-dsp
       - fsl,imx8qxp-hifi4
       - fsl,imx8qm-hifi4
       - fsl,imx8mp-hifi4
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 000000000000..3e63f79890b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
new file mode 100644
index 000000000000..ca8d8661f872
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mt8195 DSP core
+
+maintainers:
+  - YC Hung <yc.hung@mediatek.com>
+
+description: |
+  Some boards from mt8195 contain a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP Cfg registers
+      - description: Address and size of the DSP SRAM
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: 26M clock
+      - description: mux for audio dsp local bus
+      - description: default audio dsp local bus clock source
+      - description: clock gate for audio dsp clock
+      - description: mux for audio dsp access external bus
+
+  clock-names:
+    items:
+      - const: adsp_sel
+      - const: clk26m_ck
+      - const: audio_local_bus
+      - const: mainpll_d7_d2
+      - const: scp_adsp_audiodsp
+      - const: audio_h
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - memory-region
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dsp@10803000 {
+       compatible =  "mediatek,mt8195-dsp";
+       reg = <0x10803000  0x1000>,
+             <0x10840000  0x40000>;
+       reg-names = "cfg", "sram";
+       clocks = <&topckgen 10>, //CLK_TOP_ADSP
+                <&clk26m>,
+                <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
+                <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
+                <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
+                <&topckgen 34>; //CLK_TOP_AUDIO_H
+       clock-names = "adsp_sel",
+                     "clk26m_ck",
+                     "audio_local_bus",
+                     "mainpll_d7_d2",
+                     "scp_adsp_audiodsp",
+                     "audio_h";
+       memory-region = <&adsp_dma_mem_reserved>,
+                       <&adsp_mem_reserved>;
+       power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
+       mbox-names = "rx", "tx";
+       mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
index c8b91207f34d..1dcb85a02a76 100644
--- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -43,7 +43,6 @@ properties:
 
   performance-domains:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
     description:
       A phandle and performance domain specifier as defined by bindings of the
       performance controller/provider specified by phandle.
@@ -52,10 +51,16 @@ additionalProperties: true
 
 examples:
   - |
-    performance: performance-controller@12340000 {
-        compatible = "qcom,cpufreq-hw";
-        reg = <0x12340000 0x1000>;
-        #performance-domain-cells = <1>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
     };
 
     // The node above defines a performance controller that is a performance
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
deleted file mode 100644
index c94acbb8cb0c..000000000000
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to at24.yaml.
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 4c5396a9744f..d14e0accbda8 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -87,6 +87,10 @@ properties:
               - items:
                   pattern: cs1024$
               - items:
+                  pattern: c1025$
+              - items:
+                  pattern: cs1025$
+              - items:
                   pattern: c2048$
               - items:
                   pattern: cs2048$
@@ -95,32 +99,31 @@ properties:
       # These are special cases that don't conform to the above pattern.
       # Each requires a standard at24 model as fallback.
       - items:
-          - const: nxp,se97b
-          - const: atmel,24c02
+          - enum:
+              - rohm,br24g01
+              - rohm,br24t01
+          - const: atmel,24c01
       - items:
-          - const: onnn,cat24c04
-          - const: atmel,24c04
+          - enum:
+              - nxp,se97b
+              - renesas,r1ex24002
+          - const: atmel,24c02
       - items:
-          - const: onnn,cat24c05
+          - enum:
+              - onnn,cat24c04
+              - onnn,cat24c05
           - const: atmel,24c04
       - items:
-          - const: renesas,r1ex24002
-          - const: atmel,24c02
-      - items:
           - const: renesas,r1ex24016
           - const: atmel,24c16
       - items:
           - const: giantec,gt24c32a
           - const: atmel,24c32
       - items:
-          - const: renesas,r1ex24128
+          - enum:
+              - renesas,r1ex24128
+              - samsung,s524ad0xd1
           - const: atmel,24c128
-      - items:
-          - const: rohm,br24g01
-          - const: atmel,24c01
-      - items:
-          - const: rohm,br24t01
-          - const: atmel,24c01
 
   label:
     description: Descriptive name of the EEPROM.
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index fbf99e346966..8b1c997caac1 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -44,8 +44,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   pagesize:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
@@ -105,6 +103,7 @@ required:
   - spi-max-frequency
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -117,7 +116,7 @@ allOf:
         - size
         - address-width
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
index 44fd2f6f0d8a..0c2f5ddb79c5 100644
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
+++ b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
+$id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
@@ -28,9 +28,6 @@ properties:
     description: chip select of EEPROM
     maxItems: 1
 
-  spi-max-frequency: true
-  spi-cs-high: true
-
   read-only:
     description:
       parameter-less property which disables writes to the EEPROM
@@ -42,14 +39,16 @@ properties:
       of EEPROM (e.g. for SPI bus multiplexing)
     maxItems: 1
 
-
 required:
   - compatible
   - reg
   - data-size
   - spi-max-frequency
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index c078796ae1b5..8e1a8b19d429 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -162,6 +162,16 @@ properties:
       don't need a type.
     enum: [ 100, 200, 300 ]
 
+  vendor,int-array-variable-length-and-constrained-values:
+    description: Array might define what type of elements might be used (e.g.
+      their range).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
   child-node:
     description: Child nodes are just another property from a json-schema
       perspective.
@@ -207,6 +217,10 @@ allOf:
     then:
       required:
         - foo-supply
+    else:
+      # If otherwise the property is not allowed:
+      properties:
+        foo-supply: false
   # Altering schema depending on presence of properties is usually done by
   # dependencies (see above), however some adjustments might require if:
   - if:
@@ -235,13 +249,13 @@ examples:
   # be overridden or an appropriate parent bus node should be shown (such as on
   # i2c buses).
   #
-  # Any includes used have to be explicitly included.
+  # Any includes used have to be explicitly included. Use 4-space indentation.
   - |
     node@1000 {
-          compatible = "vendor,soc4-ip", "vendor,soc1-ip";
-          reg = <0x1000 0x80>,
-                <0x3000 0x80>;
-          reg-names = "core", "aux";
-          interrupts = <10>;
-          interrupt-controller;
+        compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+        reg = <0x1000 0x80>,
+              <0x3000 0x80>;
+        reg-names = "core", "aux";
+        interrupts = <10>;
+        interrupt-controller;
     };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
index 20e1ccfc8630..2d82b44268db 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC USB Type-C cable and accessories detection
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
new file mode 100644
index 000000000000..128960545640
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-muic
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - connector
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
index fd2e55088888..7a224b2f0977 100644
--- a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -20,11 +20,12 @@ properties:
     enum:
       - siliconmitus,sm5502-muic
       - siliconmitus,sm5504-muic
+      - siliconmitus,sm5703-muic
 
   reg:
     maxItems: 1
-    description: I2C slave address of the device. Usually 0x25 for SM5502,
-      0x14 for SM5504.
+    description: I2C slave address of the device. Usually 0x25 for SM5502
+      and SM5703, 0x14 for SM5504.
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5c4c6782e052..1c0388da6721 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -38,6 +38,9 @@ properties:
                      The virtio transport only supports a single device.
         items:
           - const: arm,scmi-virtio
+      - description: SCMI compliant firmware with OP-TEE transport
+        items:
+          - const: linaro,scmi-optee
 
   interrupts:
     description:
@@ -78,11 +81,24 @@ properties:
   '#size-cells':
     const: 0
 
+  atomic-threshold-us:
+    description:
+      An optional time value, expressed in microseconds, representing, on this
+      platform, the threshold above which any SCMI command, advertised to have
+      an higher-than-threshold execution latency, should not be considered for
+      atomic mode of operation, even if requested.
+    default: 0
+
   arm,smc-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
       SMC id required when using smc or hvc transports
 
+  linaro,optee-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel specifier required when using OP-TEE transport.
+
   protocol@11:
     type: object
     properties:
@@ -167,6 +183,12 @@ properties:
             required:
               - reg
 
+  protocol@18:
+    type: object
+    properties:
+      reg:
+        const: 0x18
+
 additionalProperties: false
 
 patternProperties:
@@ -195,6 +217,12 @@ patternProperties:
         minItems: 1
         maxItems: 2
 
+      linaro,optee-channel-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Channel specifier required when using OP-TEE transport and
+          protocol has a dedicated communication channel.
+
     required:
       - reg
 
@@ -226,6 +254,16 @@ else:
       - arm,smc-id
       - shmem
 
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: linaro,scmi-optee
+    then:
+      required:
+        - linaro,optee-channel-id
+
 examples:
   - |
     firmware {
@@ -240,6 +278,8 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
+            atomic-threshold-us = <10000>;
+
             scmi_devpd: protocol@11 {
                 reg = <0x11>;
                 #power-domain-cells = <1>;
@@ -289,6 +329,10 @@ examples:
                     };
                 };
             };
+
+            scmi_powercap: protocol@18 {
+                reg = <0x18>;
+            };
         };
     };
 
@@ -330,7 +374,7 @@ examples:
     firmware {
         scmi {
             compatible = "arm,scmi-smc";
-            shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>;
+            shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
             arm,smc-id = <0xc3000001>;
 
             #address-cells = <1>;
@@ -340,7 +384,48 @@ examples:
                 reg = <0x11>;
                 #power-domain-cells = <1>;
             };
+        };
+    };
 
+  - |
+    firmware {
+        scmi {
+            compatible = "linaro,scmi-optee";
+            linaro,optee-channel-id = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_dvfs1: protocol@13 {
+                reg = <0x13>;
+                linaro,optee-channel-id = <1>;
+                shmem = <&cpu_optee_lpri0>;
+                #clock-cells = <1>;
+            };
+
+            scmi_clk0: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@51000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x51000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x51000000 0x10000>;
+
+            cpu_optee_lpri0: optee-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
index 23b346bd1252..1f9322925e7c 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
@@ -43,6 +43,7 @@ properties:
       by remote SCP firmware for use by SCPI message protocol should be
       specified in any order.
     minItems: 1
+    maxItems: 4
 
   shmem:
     description:
@@ -51,6 +52,7 @@ properties:
       be any memory reserved for the purpose of this communication between the
       processors.
     minItems: 1
+    maxItems: 4
 
   power-controller:
     type: object
@@ -235,8 +237,8 @@ examples:
     firmware {
         scpi {
             compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-            mboxes = <&mailbox 1 &mailbox 2>;
-            shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+            mboxes = <&mailbox 1>, <&mailbox 2>;
+            shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>;
 
             scpi_sensors1: sensors {
                 compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
new file mode 100644
index 000000000000..557e524786c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX System Controller Firmware (SCFW)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  The System Controller Firmware (SCFW) is a low-level system function
+  which runs on a dedicated Cortex-M core to provide power, clock, and
+  resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+  (QM, QP), and i.MX8QX (QXP, DX).
+  The AP communicates with the SC using a multi-ported MU module found
+  in the LSIO subsystem. The current definition of this MU module provides
+  5 remote AP connections to the SC to support up to 5 execution environments
+  (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+  with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+  using the MSI bus.
+
+properties:
+  compatible:
+    const: fsl,imx-scu
+
+  clock-controller:
+    description:
+      Clock controller node that provides the clocks controlled by the SCU
+    $ref: /schemas/clock/fsl,scu-clk.yaml
+
+  gpio:
+    description:
+      Control the GPIO PINs on SCU domain over the firmware APIs
+    $ref: /schemas/gpio/fsl,imx8qxp-sc-gpio.yaml
+
+  ocotp:
+    description:
+      OCOTP controller node provided by the SCU
+    $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
+
+  keys:
+    description:
+      Keys provided by the SCU
+    $ref: /schemas/input/fsl,scu-key.yaml
+
+  mboxes:
+    description:
+      A list of phandles of TX MU channels followed by a list of phandles of
+      RX MU channels. The list may include at the end one more optional MU
+      channel for general interrupt. The number of expected tx and rx
+      channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
+      compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
+      within the same MU instance. Cross instances are not allowed. The MU
+      instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
+      need to ensure that one is used that does not conflict with other
+      execution environments such as ATF.
+    oneOf:
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+          - description: optional MU channel for general interrupt
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+          - description: optional MU channel for general interrupt
+
+  mbox-names:
+    oneOf:
+      - items:
+          - const: tx0
+          - const: rx0
+      - items:
+          - const: tx0
+          - const: rx0
+          - const: gip3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+          - const: gip3
+
+  pinctrl:
+    description:
+      Pin controller provided by the SCU
+    $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
+
+  power-controller:
+    description:
+      Power domains controller node that provides the power domains
+      controlled by the SCU
+    $ref: /schemas/power/fsl,scu-pd.yaml
+
+  rtc:
+    description:
+      RTC controller provided by the SCU
+    $ref: /schemas/rtc/fsl,scu-rtc.yaml
+
+  thermal-sensor:
+    description:
+      Thermal sensor provided by the SCU
+    $ref: /schemas/thermal/fsl,scu-thermal.yaml
+
+  watchdog:
+    description:
+      Watchdog controller provided by the SCU
+    $ref: /schemas/watchdog/fsl,scu-wdt.yaml
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+    firmware {
+        system-controller {
+            compatible = "fsl,imx-scu";
+            mbox-names = "tx0", "tx1", "tx2", "tx3",
+                         "rx0", "rx1", "rx2", "rx3",
+                         "gip3";
+            mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
+                      &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
+                      &lsio_mu1 3 3>;
+
+            clock-controller {
+                compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+                #clock-cells = <2>;
+            };
+
+            pinctrl {
+                compatible = "fsl,imx8qxp-iomuxc";
+
+                pinctrl_lpuart0: lpuart0grp {
+                    fsl,pins = <
+                        IMX8QXP_UART0_RX_ADMA_UART0_RX   0x06000020
+                        IMX8QXP_UART0_TX_ADMA_UART0_TX   0x06000020
+                    >;
+                };
+            };
+
+            ocotp {
+                compatible = "fsl,imx8qxp-scu-ocotp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                fec_mac0: mac@2c4 {
+                    reg = <0x2c4 6>;
+                };
+            };
+
+            power-controller {
+                compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+                #power-domain-cells = <1>;
+            };
+
+            rtc {
+                compatible = "fsl,imx8qxp-sc-rtc";
+            };
+
+            keys {
+                compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+                linux,keycodes = <KEY_POWER>;
+            };
+
+            watchdog {
+                compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+                timeout-sec = <60>;
+            };
+
+            thermal-sensor {
+                compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
deleted file mode 100644
index b1cd4ad1889a..000000000000
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-QCOM Secure Channel Manager (SCM)
-
-Qualcomm processors include an interface to communicate to the secure firmware.
-This interface allows for clients to request different types of actions.  These
-can include CPU power up/down, HDCP requests, loading of firmware, and other
-assorted actions.
-
-Required properties:
-- compatible: must contain one of the following:
- * "qcom,scm-apq8064"
- * "qcom,scm-apq8084"
- * "qcom,scm-ipq4019"
- * "qcom,scm-ipq806x"
- * "qcom,scm-ipq8074"
- * "qcom,scm-mdm9607"
- * "qcom,scm-msm8226"
- * "qcom,scm-msm8660"
- * "qcom,scm-msm8916"
- * "qcom,scm-msm8953"
- * "qcom,scm-msm8960"
- * "qcom,scm-msm8974"
- * "qcom,scm-msm8994"
- * "qcom,scm-msm8996"
- * "qcom,scm-msm8998"
- * "qcom,scm-sc7180"
- * "qcom,scm-sc7280"
- * "qcom,scm-sdm845"
- * "qcom,scm-sdx55"
- * "qcom,scm-sm6350"
- * "qcom,scm-sm8150"
- * "qcom,scm-sm8250"
- * "qcom,scm-sm8350"
- * "qcom,scm-sm8450"
- and:
- * "qcom,scm"
-- clocks: Specifies clocks needed by the SCM interface, if any:
- * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
-   "qcom,scm-msm8960"
- * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974"
-- clock-names: Must contain "core" for the core clock, "iface" for the interface
-  clock and "bus" for the bus clock per the requirements of the compatible.
-- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
-		   download mode control register (optional)
-
-Example for MSM8916:
-
-	firmware {
-		scm {
-			compatible = "qcom,msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> ,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
new file mode 100644
index 000000000000..c5b76c9f7ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-mdm9607
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sc8280xp
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sdx65
+          - qcom,scm-sm6115
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-qcs404
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+      required:
+        - clocks
+        - clock-names
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,scm-msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
new file mode 100644
index 000000000000..fcf0011b8e6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU Firmware Configuration bindings
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Various QEMU emulation / virtualization targets provide the following
+  Firmware Configuration interface on the "virt" machine type:
+
+  - A write-only, 16-bit wide selector (or control) register,
+  - a read-write, 64-bit wide data register.
+
+  QEMU exposes the control and data register to guests as memory mapped
+  registers; their location is communicated to the guest's UEFI firmware in the
+  DTB that QEMU places at the bottom of the guest's DRAM.
+
+  The authoritative guest-side hardware interface documentation to the fw_cfg
+  device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
+
+
+properties:
+  compatible:
+    const: qemu,fw-cfg-mmio
+
+  reg:
+    maxItems: 1
+    description: |
+      * Bytes 0x0 to 0x7 cover the data register.
+      * Bytes 0x8 to 0x9 cover the selector register.
+      * Further registers may be appended to the region in case of future interface
+        revisions / feature bits.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    fw-cfg@9020000 {
+        compatible = "qemu,fw-cfg-mmio";
+        reg = <0x9020000 0xa>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 7d3515264838..6694ef29a267 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -330,7 +330,7 @@ succeeded.
 
 The Device Tree Overlay will contain:
  * "target-path" or "target"
-   The insertion point where the the contents of the overlay will go into the
+   The insertion point where the contents of the overlay will go into the
    live tree.  target-path is a full path, while target is a phandle.
  * "ranges"
     The address space mapping from processor to FPGA bus(ses).
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
new file mode 100644
index 000000000000..527532f039ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/microchip,mpf-spi-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire FPGA manager.
+
+maintainers:
+  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+
+description:
+  Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to
+  load the bitstream in .dat format.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpf-spi-fpga-mgr
+
+  reg:
+    description: SPI chip select
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fpga_mgr@0 {
+                    compatible = "microchip,mpf-spi-fpga-mgr";
+                    spi-max-frequency = <20000000>;
+                    reg = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
index 29daca4be47f..f47b6140a742 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/fpga/xilinx-zynq-fpga-mgr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq FPGA Manager Device Tree Bindings
+title: Xilinx Zynq FPGA Manager
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
index 6cd2bdc06b5f..00a8d92ff736 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq Ultrascale MPSoC FPGA Manager Device Tree Bindings
+title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
 
 maintainers:
   - Nava kishore Manne <navam@xilinx.com>
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 000000000000..c21549e0fba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Broadcom GPS chips can be used over the UART or I2C bus. The UART
+  bus requires CTS/RTS support. The number of the capsule is more
+  elaborate than the compatibles BCM4751 may be printed
+  BCM4751IFBG for example.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4751
+      - brcm,bcm4752
+      - brcm,bcm4753
+
+  reg:
+    description:
+      The I2C Address, not required on UART buses.
+
+  vdd-auxin-supply:
+    description:
+      Main voltage supply, pin name VDD_AUXIN, typically connected
+      directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+  vddio-supply:
+    description:
+      IO voltage supply, pin name VDDIO, typically 1.8V
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  enable-gpios:
+    description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+      If the line is active low such as NSTANDBY, it should be tagged
+      GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "brcm,bcm4751";
+            vdd-auxin-supply = <&vbat>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
new file mode 100644
index 000000000000..963b926e30a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Global Navigation Satellite Systems (GNSS)
+  receiver devices
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: |
+  This document defines device tree properties common to Global Navigation
+  Satellite System receivers.
+
+properties:
+  $nodename:
+    pattern: "^gnss(@.*)?$"
+
+  lna-supply:
+    description: A separate regulator supplying power for the Low Noise
+      Amplifier (LNA). This is an amplifier connected between the GNSS
+      device and the receiver antenna.
+
+  enable-gpios:
+    description: A GPIO line that will enable the GNSS receiver when
+      asserted. If this line is active low, the GPIO phandle should
+      consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
+      system can rely on asserting the line to enable the GNSS device.
+    maxItems: 1
+
+  timepulse-gpios:
+    description: When a timepulse is provided to the GNSS device using a
+      GPIO line, this is used.
+    maxItems: 1
+
+  current-speed:
+    description: The baudrate in bits per second of the device as it comes
+      online, current active speed.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      gnss {
+        compatible = "u-blox,neo-8";
+        vcc-supply = <&gnss_reg>;
+        timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+        current-speed = <4800>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
deleted file mode 100644
index d6dc9c0d8249..000000000000
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-GNSS Receiver DT binding
-
-This documents the binding structure and common properties for GNSS receiver
-devices.
-
-A GNSS receiver node is a node named "gnss" and typically resides on a serial
-bus (e.g. UART, I2C or SPI).
-
-Please refer to the following documents for generic properties:
-
-	Documentation/devicetree/bindings/serial/serial.yaml
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties:
-
-- compatible	: A string reflecting the vendor and specific device the node
-		  represents
-
-Optional properties:
-- lna-supply	: Separate supply for an LNA
-- enable-gpios	: GPIO used to enable the device
-- timepulse-gpios	: Time pulse GPIO
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		vcc-supply = <&gnss_reg>;
-		timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-
-		current-speed = <4800>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
deleted file mode 100644
index 80cb802813c5..000000000000
--- a/Documentation/devicetree/bindings/gnss/mediatek.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek-based GNSS Receiver DT binding
-
-Mediatek chipsets are used in GNSS-receiver modules produced by several
-vendors and can use a UART interface.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be
-
-			"globaltop,pa6h"
-
-- vcc-supply	: Main voltage regulator (pin name: VCC)
-
-Optional properties:
-
-- current-speed		: Default UART baud rate
-- gnss-fix-gpios	: GPIO used to determine device position fix state
-			  (pin name: FIX, 3D_FIX)
-- reset-gpios		: GPIO used to reset the device (pin name: RESET, NRESET)
-- timepulse-gpios	: Time pulse GPIO (pin name: PPS1, 1PPS)
-- vbackup-supply	: Backup voltage regulator (pin name: VBAT, VBACKUP)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "globaltop,pa6h";
-		vcc-supply = <&vcc_3v3>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 000000000000..c0eb35beb2ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  Mediatek chipsets are used in GNSS-receiver modules produced by several
+  vendors and can use a UART interface.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    const: globaltop,pa6h
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin name VCC.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional reset line, with names such as RESET or NRESET.
+      If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+  timepulse-gpios:
+    description: Comes with pin names such as PPS1 or 1PPS.
+
+  gnss-fix-gpios:
+    maxItems: 1
+    description: GPIO used to determine device position fix state, pin names
+      FIX or 3D_FIX.
+
+  vbackup-supply:
+    description:
+      Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "globaltop,pa6h";
+            vcc-supply = <&vcc_3v3>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
deleted file mode 100644
index f4252b6b660b..000000000000
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiRFstar-based GNSS Receiver DT binding
-
-SiRFstar chipsets are used in GNSS-receiver modules produced by several
-vendors and can use UART, SPI or I2C interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"fastrax,uc430"
-			"linx,r4"
-			"wi2wi,w2sg0004"
-			"wi2wi,w2sg0008i"
-			"wi2wi,w2sg0084i"
-
-- vcc-supply	: Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
-
-Required properties (I2C):
-- reg		: I2C slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Optional properties:
-
-- sirf,onoff-gpios	: GPIO used to power on and off device (pin name: ON_OFF)
-- sirf,wakeup-gpios	: GPIO used to determine device power state
-			  (pin name: RFPWRUP, WAKEUP)
-- timepulse-gpios	: Time pulse GPIO (pin name: 1PPS, TM)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "wi2wi,w2sg0084i";
-
-		vcc-supply = <&gnss_reg>;
-		sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
new file mode 100644
index 000000000000..0bbe684d82e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  The SiRFstar GNSS receivers have incarnated over the years in different
+  chips, starting from the SiRFstarIII which was a chip that was introduced in
+  2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+  by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+  acquired by Samsung, while some products remained with CSR. In 2014 CSR
+  was acquired by Qualcomm who still sell some of the SiRF products.
+
+  SiRF chips can be used over UART, I2C or SPI buses.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - csr,gsd4t
+      - csr,csrg05ta03-icje-r
+      - fastrax,uc430
+      - linx,r4
+      - wi2wi,w2sg0004
+      - wi2wi,w2sg0008i
+      - wi2wi,w2sg0084i
+
+  reg:
+    description:
+      The I2C Address, SPI chip select address. Not required on UART buses.
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  sirf,onoff-gpios:
+    maxItems: 1
+    description: GPIO used to power on and off device, pin name ON_OFF.
+
+  sirf,wakeup-gpios:
+    maxItems: 1
+    description: GPIO used to determine device power state, pin names such
+      as RFPWRUP, WAKEUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "wi2wi,w2sg0084i";
+            vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 396101a223e7..4835a280b3bf 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -4,7 +4,10 @@
 $id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: U-blox GNSS Receiver Device Tree Bindings
+title: U-blox GNSS Receiver
+
+allOf:
+  - $ref: gnss-common.yaml#
 
 maintainers:
   - Johan Hovold <johan@kernel.org>
@@ -29,27 +32,20 @@ properties:
     description: >
       Main voltage regulator
 
-  timepulse-gpios:
-    maxItems: 1
-    description: >
-      Time pulse GPIO
-
   u-blox,extint-gpios:
     maxItems: 1
     description: >
       GPIO connected to the "external interrupt" input pin
-  
+
   v-bckp-supply:
     description: >
       Backup voltage regulator
 
-  current-speed: true
-
 required:
   - compatible
   - vcc-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..7c41d8e814cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
deleted file mode 100644
index 5d468ecd1809..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Broadcom STB "UPG GIO" GPIO controller
-
-The controller's registers are organized as sets of eight 32-bit
-registers with each set controlling a bank of up to 32 pins.  A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-
-- compatible:
-    Must be "brcm,brcmstb-gpio"
-
-- reg:
-    Define the base and range of the I/O address space containing
-    the brcmstb GPIO controller registers
-
-- #gpio-cells:
-    Should be <2>.  The first cell is the pin number (within the controller's
-    pin space), and the second is used for the following:
-    bit[0]: polarity (0 for active-high, 1 for active-low)
-
-- gpio-controller:
-    Specifies that the node is a GPIO controller.
-
-- brcm,gpio-bank-widths:
-    Number of GPIO lines for each bank.  Number of elements must
-    correspond to number of banks suggested by the 'reg' property.
-
-Optional properties:
-
-- interrupts:
-    The interrupt shared by all GPIO lines for this controller.
-
-- interrupts-extended:
-    Alternate form of specifying interrupts and parents that allows for
-    multiple parents.  This takes precedence over 'interrupts' and
-    'interrupt-parent'.  Wakeup-capable GPIO controllers often route their
-    wakeup interrupt lines through a different interrupt controller than the
-    primary interrupt line, making this property necessary.
-
-- #interrupt-cells:
-    Should be <2>.  The first cell is the GPIO number, the second should specify
-    flags.  The following subset of flags is supported:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = high-to-low edge triggered
-        4 = active high level-sensitive
-        8 = active low level-sensitive
-      Valid combinations are 1, 2, 3, 4, 8.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- interrupt-controller:
-    Marks the device node as an interrupt controller
-
-- wakeup-source:
-    GPIOs for this controller can be used as a wakeup source
-
-Example:
-	upg_gio: gpio@f040a700 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf040a700 0x80>;
-		interrupt-parent = <&irq0_intc>;
-		interrupts = <0x6>;
-		brcm,gpio-bank-widths = <32 32 32 24>;
-	};
-
-	upg_gio_aon: gpio@f04172c0 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf04172c0 0x40>;
-		interrupt-parent = <&irq0_aon_intc>;
-		interrupts = <0x6>;
-		interrupts-extended = <&irq0_aon_intc 0x6>,
-			<&aon_pm_l2_intc 0x5>;
-		wakeup-source;
-		brcm,gpio-bank-widths = <18 4>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
new file mode 100644
index 000000000000..4a896ff7edc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB "UPG GIO" GPIO controller
+
+description: >
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7445-gpio
+      - const: brcm,brcmstb-gpio
+
+  reg:
+    maxItems: 1
+    description: >
+      Define the base and range of the I/O address space containing
+      the brcmstb GPIO controller registers
+
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number (within the controller's
+      pin space), and the second is used for the following:
+      bit[0]: polarity (0 for active-high, 1 for active-low)
+
+  gpio-controller: true
+
+  brcm,gpio-bank-widths:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Number of GPIO lines for each bank.  Number of elements must
+      correspond to number of banks suggested by the 'reg' property.
+
+  interrupts:
+    maxItems: 1
+    description: >
+      The interrupt shared by all GPIO lines for this controller.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the GPIO number, the second should specify
+      flags.  The following subset of flags is supported:
+      - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+
+  interrupt-controller: true
+
+  wakeup-source:
+    type: boolean
+    description: >
+      GPIOs for this controller can be used as a wakeup source
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "brcm,gpio-bank-widths"
+
+additionalProperties: false
+
+examples:
+  - |
+    upg_gio: gpio@f040a700 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf040a700 0x80>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x6>;
+        brcm,gpio-bank-widths = <32 32 32 24>;
+    };
+
+    upg_gio_aon: gpio@f04172c0 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf04172c0 0x40>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupts = <0x6>;
+        wakeup-source;
+        brcm,gpio-bank-widths = <18 4>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
new file mode 100644
index 000000000000..e3e668a12091
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/delta,tn48m-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD GPIO controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Delta TN48M has an onboard Lattice CPLD that is used as an GPIO expander.
+  It provides 12 pins in total, they are input-only or ouput-only type.
+
+properties:
+  compatible:
+    enum:
+      - delta,tn48m-gpo
+      - delta,tn48m-gpi
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index 5fe19fa5f67c..c0ad70e66f76 100644
--- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -26,14 +26,13 @@ properties:
     const: 2
 
   registers-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of daisy-chained shift registers
 
   enable-gpios:
     description: GPIO connected to the OE (Output Enable) pin.
     maxItems: 1
 
-  spi-max-frequency: true
-
 patternProperties:
   "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
     type: object
@@ -58,7 +57,10 @@ required:
   - '#gpio-cells'
   - registers-number
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
deleted file mode 100644
index d04236558619..000000000000
--- a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Faraday Technology FTGPIO010 GPIO Controller
-
-Required properties:
-
-- compatible : Should be one of
-  "cortina,gemini-gpio", "faraday,ftgpio010"
-  "moxa,moxart-gpio", "faraday,ftgpio010"
-  "faraday,ftgpio010"
-- reg : Should contain registers location and length
-- interrupts : Should contain the interrupt line for the GPIO block
-- gpio-controller : marks this as a GPIO controller
-- #gpio-cells : Should be 2, see gpio/gpio.txt
-- interrupt-controller : marks this as an interrupt controller
-- #interrupt-cells : a standard two-cell interrupt flag, see
-  interrupt-controller/interrupts.txt
-
-Example:
-
-gpio@4d000000 {
-	compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-	reg = <0x4d000000 0x100>;
-	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
new file mode 100644
index 000000000000..640da5b9b0cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/faraday,ftgpio010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGPIO010 GPIO Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-gpio
+          - const: faraday,ftgpio010
+      - items:
+          - const: moxa,moxart-gpio
+          - const: faraday,ftgpio010
+      - const: faraday,ftgpio010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the interrupt line for the GPIO block
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@4d000000 {
+      compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+      reg = <0x4d000000 0x100>;
+      interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
new file mode 100644
index 000000000000..b7b32220935d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,imx8qxp-sc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver over IMX SCU firmware API
+
+maintainers:
+  - Shenwei Wang <shenwei.wang@nxp.com>
+
+description: |
+  This module provides the standard interface to control the
+  resource pins in SCU domain on i.MX8 platforms.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-sc-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio {
+        compatible = "fsl,imx8qxp-sc-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
index f57d22d1ebd6..ae18603697d7 100644
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -37,6 +37,8 @@ properties:
               - fsl,imx8mp-gpio
               - fsl,imx8mq-gpio
               - fsl,imx8qxp-gpio
+              - fsl,imxrt1050-gpio
+              - fsl,imxrt1170-gpio
           - const: fsl,imx35-gpio
 
   reg:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
new file mode 100644
index 000000000000..40d0be31e200
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common GPIO lines
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
+  using inverted signal (e.g. RESETN).
+
+select: true
+
+properties:
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the enable control pin.
+
+  reset-gpios:
+    description:
+      GPIO (or GPIOs for power sequence) connected to the device reset pin
+      (e.g. RESET or RESETN).
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the power down pin (hardware power down or power cut,
+      e.g. PD or PWDN).
+
+  pwdn-gpios:
+    maxItems: 1
+    description: Use powerdown-gpios
+    deprecated: true
+
+  wakeup-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the pin waking up the device from suspend or other
+      power-saving modes.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mmc-pwrseq-simple
+    then:
+      properties:
+        reset-gpios:
+          minItems: 1
+          maxItems: 32
+    else:
+      properties:
+        reset-gpios:
+          maxItems: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
deleted file mode 100644
index 0fc6700ed800..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Marvell EBU GPIO controller
-
-Required properties:
-
-- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
-  "marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
-
-    "marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
-    Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
-    should be used for the Discovery MV78200.
-
-    "marvel,armadaxp-gpio" should be used for all Armada XP SoCs
-    (MV78230, MV78260, MV78460).
-
-    "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
-    SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
-    for specific details about the offset property.
-
-- reg: Address and length of the register set for the device. Only one
-  entry is expected, except for the "marvell,armadaxp-gpio" variant
-  for which two entries are expected: one for the general registers,
-  one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
-
-- interrupts: The list of interrupts that are used for all the pins
-  managed by this GPIO bank. There can be more than one interrupt
-  (example: 1 interrupt per 8 pins on Armada XP, which means 4
-  interrupts per bank of 32 GPIOs).
-
-- interrupt-controller: identifies the node as an interrupt controller
-
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be two.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-- gpio-controller: marks the device node as a gpio controller
-
-- ngpios: number of GPIOs this controller has
-
-- #gpio-cells: Should be two. The first cell is the pin number. The
-  second cell is reserved for flags, unused at the moment.
-
-Optional properties:
-
-In order to use the GPIO lines in PWM mode, some additional optional
-properties are required.
-
-- compatible: Must contain "marvell,armada-370-gpio"
-
-- reg: an additional register set is needed, for the GPIO Blink
-  Counter on/off registers.
-
-- reg-names: Must contain an entry "pwm" corresponding to the
-  additional register range needed for PWM operation.
-
-- #pwm-cells: Should be two. The first cell is the GPIO line number. The
-  second cell is the period in nanoseconds.
-
-- clocks: Must be a phandle to the clock for the GPIO controller.
-
-Example:
-
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
-		};
-
-		gpio1: gpio@18140 {
-			compatible = "marvell,armada-370-gpio";
-			reg = <0x18140 0x40>, <0x181c8 0x08>;
-			reg-names = "gpio", "pwm";
-			ngpios = <17>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			#pwm-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <87>, <88>, <89>;
-			clocks = <&coreclk 0>;
-		};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
new file mode 100644
index 000000000000..f1bd1e6b2e1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU GPIO controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-8k-gpio
+          - marvell,orion-gpio
+
+      - items:
+          - enum:
+              - marvell,mv78200-gpio
+              - marvell,armada-370-gpio
+          - const: marvell,orion-gpio
+
+      - description: Deprecated binding
+        items:
+          - const: marvell,armadaxp-gpio
+          - const: marvell,orion-gpio
+        deprecated: true
+
+  reg:
+    description: |
+      Address and length of the register set for the device. Not used for
+      marvell,armada-8k-gpio.
+
+      A second entry can be provided, for the PWM function using the GPIO Blink
+      Counter on/off registers.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pwm
+    minItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the gpio registers (in bytes)
+
+  interrupts:
+    description: |
+      The list of interrupts that are used for all the pins managed by this
+      GPIO bank. There can be more than one interrupt (example: 1 interrupt
+      per 8 pins on Armada XP, which means 4 interrupts per bank of 32
+      GPIOs).
+    minItems: 1
+    maxItems: 4
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  "#gpio-cells":
+    const: 2
+
+  marvell,pwm-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the pwm registers (in bytes)
+
+  "#pwm-cells":
+    description:
+      The first cell is the GPIO line number. The second cell is the period
+      in nanoseconds.
+    const: 2
+
+  clocks:
+    description:
+      Clock(s) used for PWM function.
+    items:
+      - description: Core clock
+      - description: AXI bus clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: core
+      - const: axi
+    minItems: 1
+
+required:
+  - compatible
+  - gpio-controller
+  - ngpios
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-gpio
+    then:
+      required:
+        - offset
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: true
+
+examples:
+  - |
+    gpio@d0018100 {
+      compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
+      reg = <0xd0018100 0x40>, <0xd0018800 0x30>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <16>, <17>, <18>, <19>;
+    };
+
+  - |
+    gpio@18140 {
+      compatible = "marvell,armada-370-gpio", "marvell,orion-gpio";
+      reg = <0x18140 0x40>, <0x181c8 0x08>;
+      reg-names = "gpio", "pwm";
+      ngpios = <17>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      #pwm-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <87>, <88>, <89>;
+      clocks = <&coreclk 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 338c5312a106..1acaa0a3d35a 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -13,6 +13,7 @@ properties:
   compatible:
     enum:
       - nxp,pca9570
+      - nxp,pca9571
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index b6a6e742b66d..1b70e9f308f3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -15,51 +15,59 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - exar,xra1202
-      - maxim,max7310
-      - maxim,max7312
-      - maxim,max7313
-      - maxim,max7315
-      - maxim,max7319
-      - maxim,max7320
-      - maxim,max7321
-      - maxim,max7322
-      - maxim,max7323
-      - maxim,max7324
-      - maxim,max7325
-      - maxim,max7326
-      - maxim,max7327
-      - nxp,pca6416
-      - nxp,pca9505
-      - nxp,pca9506
-      - nxp,pca9534
-      - nxp,pca9535
-      - nxp,pca9536
-      - nxp,pca9537
-      - nxp,pca9538
-      - nxp,pca9539
-      - nxp,pca9554
-      - nxp,pca9555
-      - nxp,pca9556
-      - nxp,pca9557
-      - nxp,pca9574
-      - nxp,pca9575
-      - nxp,pca9698
-      - nxp,pcal6416
-      - nxp,pcal6524
-      - nxp,pcal9535
-      - nxp,pcal9554b
-      - nxp,pcal9555a
-      - onnn,cat9554
-      - onnn,pca9654
-      - ti,pca6107
-      - ti,pca9536
-      - ti,tca6408
-      - ti,tca6416
-      - ti,tca6424
-      - ti,tca9539
-      - ti,tca9554
+    oneOf:
+      - items:
+          - const: diodes,pi4ioe5v6534q
+          - const: nxp,pcal6534
+      - items:
+          - enum:
+              - exar,xra1202
+              - maxim,max7310
+              - maxim,max7312
+              - maxim,max7313
+              - maxim,max7315
+              - maxim,max7319
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+              - nxp,pca6408
+              - nxp,pca6416
+              - nxp,pca9505
+              - nxp,pca9506
+              - nxp,pca9534
+              - nxp,pca9535
+              - nxp,pca9536
+              - nxp,pca9537
+              - nxp,pca9538
+              - nxp,pca9539
+              - nxp,pca9554
+              - nxp,pca9555
+              - nxp,pca9556
+              - nxp,pca9557
+              - nxp,pca9574
+              - nxp,pca9575
+              - nxp,pca9698
+              - nxp,pcal6408
+              - nxp,pcal6416
+              - nxp,pcal6524
+              - nxp,pcal6534
+              - nxp,pcal9535
+              - nxp,pcal9554b
+              - nxp,pcal9555a
+              - onnn,cat9554
+              - onnn,pca9654
+              - ti,pca6107
+              - ti,pca9536
+              - ti,tca6408
+              - ti,tca6416
+              - ti,tca6424
+              - ti,tca9539
+              - ti,tca9554
 
   reg:
     maxItems: 1
@@ -190,14 +198,6 @@ examples:
                               "chg-status+red", "green", "blue", "en-esata",
                               "fault1", "p26", "p27";
         };
-
-        ts3a227@3b {
-            compatible = "ti,ts3a227e";
-            reg = <0x3b>;
-            interrupt-parent = <&gpio99>;
-            interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-            ti,micbias = <0>; /* 2.1V */
-        };
     };
 
   - |
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
index 414a01cdf715..fba3c61f6a5b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
@@ -14,7 +14,7 @@ Optional properties:
  - ngpios		: Number of used GPIO lines (0..n-1), default is 8.
  - load-gpios		: GPIO pin specifier attached to load enable, this
 			  pin is pulsed before reading from the device to
-			  load input pin values into the the device.
+			  load input pin values into the device.
 
 For other required and optional properties of SPI slave
 nodes please refer to ../spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
index a0e4cf885213..b33f8f02c0d7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -8,8 +8,7 @@ Optional properties:
  - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
    due to different usage (e.g. touch, keypad)
 
-Node name must be stmpe_gpio and should be child node of stmpe node to which it
-belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Example:
 	stmpe_gpio {
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
deleted file mode 100644
index 1afc2de7a537..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-TPIC2810 GPIO controller bindings
-
-Required properties:
- - compatible		: Should be "ti,tpic2810".
- - reg			: The I2C address of the device
- - gpio-controller	: Marks the device node as a GPIO controller.
- - #gpio-cells		: Should be two. For consumer use see gpio.txt.
-
-Example:
-
-	gpio@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
new file mode 100644
index 000000000000..cb8a5c376e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPIC2810 GPIO controller bindings
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tpic2810
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@60 {
+            compatible = "ti,tpic2810";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "LED A", "LED B", "LED C";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index e1359391d3a4..d2c39dba56ad 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -25,7 +25,9 @@ properties:
           - const: fsl,imx7ulp-gpio
           - const: fsl,vf610-gpio
       - items:
-          - const: fsl,imx8ulp-gpio
+          - enum:
+              - fsl,imx93-gpio
+              - fsl,imx8ulp-gpio
           - const: fsl,imx7ulp-gpio
 
   reg:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
deleted file mode 100644
index e506f30e1a95..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Xilinx plb/axi GPIO controller
-
-Dual channel GPIO controller with configurable number of pins
-(from 1 to 32 per channel). Every pin can be configured as
-input/output/tristate. Both channels share the same global IRQ but
-local interrupts can be enabled on channel basis.
-
-Required properties:
-- compatible : Should be "xlnx,xps-gpio-1.00.a"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Optional properties:
-- clocks : Input clock specifier. Refer to common clock bindings.
-- interrupts : Interrupt mapping for GPIO IRQ.
-- xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
-- xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
-- xlnx,gpio-width : gpio width
-- xlnx,tri-default : if n-th bit is 1, GPIO-n is in tristate mode
-- xlnx,is-dual : if 1, controller also uses the second channel
-- xlnx,all-inputs-2 : as above but for the second channel
-- xlnx,dout-default-2 : as above but the second channel
-- xlnx,gpio2-width : as above but for the second channel
-- xlnx,tri-default-2 : as above but for the second channel
-
-
-Example:
-gpio: gpio@40000000 {
-	#gpio-cells = <2>;
-	compatible = "xlnx,xps-gpio-1.00.a";
-	clocks = <&clkc25>;
-	gpio-controller ;
-	interrupt-parent = <&microblaze_0_intc>;
-	interrupts = < 6 2 >;
-	reg = < 0x40000000 0x10000 >;
-	xlnx,all-inputs = <0x0>;
-	xlnx,all-inputs-2 = <0x0>;
-	xlnx,dout-default = <0x0>;
-	xlnx,dout-default-2 = <0x0>;
-	xlnx,gpio-width = <0x2>;
-	xlnx,gpio2-width = <0x2>;
-	xlnx,interrupt-present = <0x1>;
-	xlnx,is-dual = <0x1>;
-	xlnx,tri-default = <0xffffffff>;
-	xlnx,tri-default-2 = <0xffffffff>;
-} ;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 378da2649e66..572e1718f501 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -4,14 +4,18 @@
 $id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq GPIO controller Device Tree Bindings
+title: Xilinx Zynq GPIO controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 properties:
   compatible:
-    const: xlnx,zynq-gpio-1.0
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
 
   reg:
     maxItems: 1
@@ -24,6 +28,11 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 58
+    maxItems: 174
+
   interrupt-controller: true
 
   "#interrupt-cells":
@@ -32,6 +41,54 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynqmp-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 174
+          maxItems: 174
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynq-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 118
+          maxItems: 118
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,versal-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 58
+          maxItems: 58
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,pmc-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 116
+          maxItems: 116
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index a8895d339bfe..5663e71b751f 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -213,7 +213,7 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		line_b {
+		line_b-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-low;
diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
new file mode 100644
index 000000000000..d481e78958a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg 25>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
index 100f20cebd76..39fd959c45d2 100644
--- a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -28,10 +28,11 @@ properties:
       - enum:
           - realtek,rtl8380-gpio
           - realtek,rtl8390-gpio
+          - realtek,rtl9300-gpio
+          - realtek,rtl9310-gpio
       - const: realtek,otto-gpio
 
-  reg:
-    maxItems: 1
+  reg: true
 
   "#gpio-cells":
     const: 2
@@ -50,6 +51,23 @@ properties:
   interrupts:
     maxItems: 1
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: realtek,rtl9300-gpio
+then:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+        - description: interrupt CPU map
+else:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+
 required:
   - compatible
   - reg
@@ -74,5 +92,17 @@ examples:
         interrupt-parent = <&rtlintc>;
         interrupts = <23>;
       };
+  - |
+      gpio@3300 {
+        compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+        reg = <0x3300 0x1c>, <0x3338 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <13>;
+      };
 
 ...
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index f2541739ee3b..aa424e2b95f8 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -49,7 +49,11 @@ properties:
           - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
 
       - items:
-          - const: renesas,gpio-r8a779a0  # R-Car V3U
+          - enum:
+              - renesas,gpio-r8a779a0     # R-Car V3U
+              - renesas,gpio-r8a779f0     # R-Car S4-8
+              - renesas,gpio-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
index d4e42c2b995b..affd823c881d 100644
--- a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -27,6 +27,8 @@ properties:
       - description: APB interface clock source
       - description: GPIO debounce reference clock source
 
+  gpio-ranges: true
+
   gpio-controller: true
 
   gpio-line-names: true
diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index e04349567eeb..fc095646adea 100644
--- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive GPIO controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 
 properties:
@@ -47,6 +46,10 @@ properties:
     maximum: 32
     default: 16
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   gpio-controller: true
 
 required:
@@ -80,7 +83,7 @@ examples:
         interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
                      <17>, <18>, <19>, <20>, <21>, <22>;
         reg = <0x10060000 0x1000>;
-        clocks = <&tlclk PRCI_CLK_TLCLK>;
+        clocks = <&tlclk FU540_PRCI_CLK_TLCLK>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index bcafa494ed7a..228fa27ffdc3 100644
--- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -52,6 +52,23 @@ properties:
       <child-interrupt-base parent-interrupt-base length> triplets.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
 
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
index 9ad470e01953..b085450b527f 100644
--- a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
+++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -43,7 +43,6 @@ required:
   - gpio-controller
   - interrupt-controller
   - "#interrupt-cells"
-  - interrupt-parent
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
index 0f628b088cec..7f26f6b1eea1 100644
--- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: X-Powers AXP209 GPIO Device Tree Bindings
+title: X-Powers AXP209 GPIO
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,8 +19,14 @@ properties:
     oneOf:
       - enum:
           - x-powers,axp209-gpio
+          - x-powers,axp221-gpio
           - x-powers,axp813-gpio
       - items:
+          - enum:
+              - x-powers,axp223-gpio
+              - x-powers,axp809-gpio
+          - const: x-powers,axp221-gpio
+      - items:
           - const: x-powers,axp803-gpio
           - const: x-powers,axp813-gpio
 
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
new file mode 100644
index 000000000000..f333ee2288e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI GPIO controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@xilinx.com>
+
+description:
+  The AXI GPIO design provides a general purpose input/output interface
+  to an AXI4-Lite interface. The AXI GPIO can be configured as either
+  a single or a dual-channel device. The width of each channel is
+  independently configurable. The channels can be configured to
+  generate an interrupt when a transition on any of their inputs occurs.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-gpio-1.00.a
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 1
+    maxItems: 64
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  interrupt-names: true
+
+  xlnx,all-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in input mode.
+
+  xlnx,all-inputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in input mode.
+
+  xlnx,all-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in output mode.
+
+  xlnx,all-outputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in output mode.
+
+  xlnx,dout-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel1.
+    default: 0
+
+  xlnx,dout-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel2.
+    default: 0
+
+  xlnx,gpio-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel1.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,gpio2-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel2.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,interrupt-present:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables interrupt control logic
+                 and interrupt registers in GPIO module.
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,is-dual:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables a second GPIO channel (GPIO2).
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,tri-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel1.
+
+  xlnx,tri-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel2.
+
+required:
+  - reg
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        gpio@e000a000 {
+            compatible = "xlnx,xps-gpio-1.00.a";
+            reg = <0xa0020000 0x10000>;
+            #gpio-cells = <2>;
+            #interrupt-cells = <0x2>;
+            clocks = <&zynqmp_clk 71>;
+            gpio-controller;
+            interrupt-controller;
+            interrupt-names = "ip2intc_irpt";
+            interrupt-parent = <&gic>;
+            interrupts = <0 89 4>;
+            xlnx,all-inputs = <0x0>;
+            xlnx,all-inputs-2 = <0x0>;
+            xlnx,all-outputs = <0x0>;
+            xlnx,all-outputs-2 = <0x0>;
+            xlnx,dout-default = <0x0>;
+            xlnx,dout-default-2 = <0x0>;
+            xlnx,gpio-width = <0x20>;
+            xlnx,gpio2-width = <0x20>;
+            xlnx,interrupt-present = <0x1>;
+            xlnx,is-dual = <0x1>;
+            xlnx,tri-default = <0xFFFFFFFF>;
+            xlnx,tri-default-2 = <0xFFFFFFFF>;
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 6f98dd55fb4c..78964c140b46 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -14,32 +14,46 @@ properties:
     pattern: '^gpu@[a-f0-9]+$'
 
   compatible:
-    items:
-      - enum:
-          - amlogic,meson-g12a-mali
-          - mediatek,mt8183-mali
-          - realtek,rtd1619-mali
-          - rockchip,px30-mali
-          - rockchip,rk3568-mali
-      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-g12a-mali
+              - mediatek,mt8183-mali
+              - realtek,rtd1619-mali
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+              - rockchip,px30-mali
+              - rockchip,rk3568-mali
+          - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
 
   reg:
     maxItems: 1
 
   interrupts:
+    minItems: 3
     items:
       - description: Job interrupt
       - description: MMU interrupt
       - description: GPU interrupt
+      - description: Event interrupt
 
   interrupt-names:
+    minItems: 3
     items:
       - const: job
       - const: mmu
       - const: gpu
+      - const: event
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  clock-names: true
 
   mali-supply: true
 
@@ -52,7 +66,10 @@ properties:
     maxItems: 3
 
   resets:
-    maxItems: 2
+    minItems: 1
+    maxItems: 3
+
+  reset-names: true
 
   "#cooling-cells":
     const: 2
@@ -98,6 +115,38 @@ allOf:
       properties:
         compatible:
           contains:
+            enum:
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+            - const: bus_ace
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: rst
+            - const: axi_rst
+            - const: ace_rst
+      required:
+        - clock-names
+        - power-domains
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
             const: mediatek,mt8183-mali
     then:
       properties:
@@ -118,6 +167,21 @@ allOf:
         power-domains:
           maxItems: 1
         sram-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+      required:
+        - clock-names
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index d209f272625d..2a25384ca3ef 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -74,7 +74,8 @@ properties:
       - const: bus
 
   mali-supply: true
-  opp-table: true
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index eceaa176bd57..318122d95eb5 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -101,7 +101,8 @@ properties:
 
   mali-supply: true
 
-  opp-table: true
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index e6485f7b046f..217c42874f41 100644
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -16,6 +16,7 @@ properties:
 
   compatible:
     enum:
+      - brcm,2711-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 62486f55177d..d60626ffb28e 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -53,4 +53,3 @@ examples:
         clocks = <&clock 278>;
         clock-names = "rotator";
     };
-
diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt
deleted file mode 100644
index 70cd58608f4b..000000000000
--- a/Documentation/devicetree/bindings/h8300/cpu.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* H8/300 CPU bindings
-
-Required properties:
-
-- compatible: Compatible property value should be "renesas,h8300".
-- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-Example:
-
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <20000000>;
-		};
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
index 1f80767da38b..792f371cec03 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
@@ -1,7 +1,7 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/renesas,prr.yaml#
+$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Product Register
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
index 4bb8efb83ac1..95cbdcb56efe 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/soc/samsung/exynos-chipid.yaml#
+$id: http://devicetree.org/schemas/hwinfo/samsung,exynos-chipid.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung Exynos SoC series Chipid driver
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
new file mode 100644
index 000000000000..563ded4fca83
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,s5pv210-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 SoC ChipID
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,s5pv210-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@e0000000 {
+        compatible = "samsung,s5pv210-chipid";
+        reg = <0xe0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
index a1a8423b2e2e..dada28b47ea0 100644
--- a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
+++ b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml#
+$id: http://devicetree.org/schemas/hwinfo/ti,k3-socinfo.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments K3 Multicore SoC platforms chipid module
diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
index 1c7149f7d171..ee2726149cf3 100644
--- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
@@ -15,9 +15,22 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sfpb-mutex
-      - qcom,tcsr-mutex
+    oneOf:
+      - enum:
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -34,9 +47,9 @@ additionalProperties: false
 
 examples:
   - |
-        tcsr_mutex: hwlock@1f40000 {
-                compatible = "qcom,tcsr-mutex";
-                reg = <0x01f40000 0x40000>;
-                #hwlock-cells = <1>;
-        };
+    hwlock@1f40000 {
+        compatible = "qcom,tcsr-mutex";
+        reg = <0x01f40000 0x40000>;
+        #hwlock-cells = <1>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
index ae1b37dbee75..0a955c7b9706 100644
--- a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
@@ -39,39 +39,8 @@ additionalProperties: false
 examples:
 
   - |
-    /* OMAP4 SoCs */
-    hwspinlock: spinlock@4a0f6000 {
+    spinlock@4a0f6000 {
         compatible = "ti,omap4-hwspinlock";
         reg = <0x4a0f6000 0x1000>;
         #hwlock-cells = <1>;
     };
-
-  - |
-    / {
-        /* K3 AM65x SoCs */
-        model = "Texas Instruments K3 AM654 SoC";
-        compatible = "ti,am654-evm", "ti,am654";
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        bus@100000 {
-            compatible = "simple-bus";
-            #address-cells = <2>;
-            #size-cells = <2>;
-            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
-                     <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; /* Main NavSS */
-
-            bus@30800000 {
-                compatible = "simple-mfd";
-                #address-cells = <2>;
-                #size-cells = <2>;
-                ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>;
-
-                spinlock@30e00000 {
-                    compatible = "ti,am654-hwspinlock";
-                    reg = <0x00 0x30e00000 0x00 0x1000>;
-                    #hwlock-cells = <1>;
-                };
-            };
-        };
-    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 154bee851139..d794deb08bb7 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -8,7 +8,6 @@ title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index 223393d7cafd..ab87f51c5aef 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -37,6 +37,72 @@ properties:
     description:
       Shunt resistor value in micro-Ohm.
 
+  adi,volt-curr-sample-average:
+    description: |
+      Number of samples to be used to report voltage and current values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+  adi,power-sample-average:
+    description: |
+      Number of samples to be used to report power values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1075
+              - adi,adm1276
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1275
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 16
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1272
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 128
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1278
+              - adi,adm1293
+              - adi,adm1294
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 1
+
 required:
   - compatible
   - reg
@@ -53,5 +119,7 @@ examples:
             compatible = "adi,adm1272";
             reg = <0x10>;
             shunt-resistor-micro-ohms = <500>;
+            adi,volt-curr-sample-average = <128>;
+            adi,power-sample-average = <128>;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 6747b870f297..f2f99afb3a3b 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AXI FAN Control Device Tree Bindings
+title: Analog Devices AXI FAN Control
 
 maintainers:
   - Nuno Sá <nuno.sa@analog.com>
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
new file mode 100644
index 000000000000..9f2d08d7b978
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31760 Fan-Speed Controller
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Analog Devices MAX31760 Fan-Speed Controller
+  https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max31760
+
+  reg:
+    description: I2C address of slave device.
+    minimum: 0x50
+    maximum: 0x57
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@50 {
+            reg = <0x50>;
+            compatible = "adi,max31760";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 7d9c083632b9..ea595102a86e 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -57,10 +57,30 @@ patternProperties:
       Configures bypassing the individual voltage input attenuator. If
       set to 1 the attenuator is bypassed if set to 0 the attenuator is
       not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
+      retains its configuration from the bios/bootloader.
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
+  "adi,pin(5|10)-function":
+    description: |
+      Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
+      pin 10 on the adi,adt7476 and adi,adt7490.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - pwm2
+      - smbalert#
+
+  "adi,pin(9|14)-function":
+    description: |
+      Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
+      pin 14 on the adi,adt7476 and adi,adt7490
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - tach4
+      - therm#
+      - smbalert#
+      - gpio
+
 required:
   - compatible
   - reg
@@ -79,6 +99,7 @@ examples:
         adi,bypass-attenuator-in0 = <1>;
         adi,bypass-attenuator-in1 = <0>;
         adi,pwm-active-state = <1 0 1>;
+        adi,pin10-function = "smbalert#";
+        adi,pin14-function = "tach4";
       };
     };
-
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 000000000000..3dbdc5af2804
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system. A service processor or baseboard management
+  controller can query the OCC for it's power and thermal data to report
+  through hwmon.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,no-poll-on-init:
+    description: This property describes whether or not the OCC should
+      be polled during driver initialization.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "ibm,p10-occ-hwmon";
+        ibm,no-poll-on-init;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
index 5dc5d2e2573d..5dc5d2e2573d 100644
--- a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
+++ b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
index f5a6cc3efd33..e1ccbd30e0eb 100644
--- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
+++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: ADC-attached Hardware Sensor Device Tree Bindings
+title: ADC-attached Hardware Sensor
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
index 4b5851c326f7..b1a4c235376e 100644
--- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LTC4151 High Voltage I2C Current and Voltage Monitor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
index 72980d083c21..8226e3b5d028 100644
--- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -14,6 +14,7 @@ properties:
   compatible:
     enum:
       - adi,adt75
+      - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
       - dallas,ds7505
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
new file mode 100644
index 000000000000..390dd6755ff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x Hardware Monitor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  Microchip LAN966x temperature monitor and fan controller
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9668-hwmon
+
+  reg:
+    items:
+      - description: PVT registers
+      - description: FAN registers
+
+  reg-names:
+    items:
+      - const: pvt
+      - const: fan
+
+  clocks:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon: hwmon@e2010180 {
+        compatible = "microchip,lan9668-hwmon";
+        reg = <0xe2010180 0xc>,
+              <0xe20042a8 0xc>;
+        reg-names = "pvt", "fan";
+        clocks = <&sys_clk>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
index c42051f8a191..028d6e570131 100644
--- a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
+++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Microchip MCP3021 A/D converter
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
index 76be625d5646..51e8619dbf3c 100644
--- a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -22,7 +22,7 @@ properties:
 
   clocks:
     items:
-      - description: AHB reference clock
+      - description: System reference clock
 
   '#thermal-sensor-cells':
     const: 0
@@ -40,5 +40,5 @@ examples:
         compatible = "microchip,sparx5-temp";
         reg = <0x10508110 0xc>;
         #thermal-sensor-cells = <0>;
-        clocks = <&ahb_clk>;
+        clocks = <&sys_clk>;
     };
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index b79f069a04c2..d0d549749208 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -9,6 +9,32 @@ title: Moortec Semiconductor MR75203 PVT Controller bindings
 maintainers:
   - Rahul Tanwar <rtanwar@maxlinear.com>
 
+description: |
+  A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+  include many different units.
+  Such a design will usually consists of several Moortec's embedded analog IPs,
+  and a single Moortec controller (mr75203) to configure and control the IPs.
+
+  Some of the Moortec's analog hard IPs that can be used in a design:
+  *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+  *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+  *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+  *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+     based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+     oscillator at 1.8V).
+  *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+     be presented for VM for measurement within its range (e.g. mr76006 -
+     divide by 2 pre-scaler).
+
+  TS, VM & PD also include a digital interface, which consists of configuration
+  inputs and measurement outputs.
+
+  Some of the units have number of series, each series can have slightly
+  different characteristics.
+
+  The mr75203 binding describes configuration for the controller unit, but also
+  for some of the analog IPs.
+
 properties:
   compatible:
     const: moortec,mr75203
@@ -44,13 +70,76 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  moortec,vm-active-channels:
+    description:
+      Defines the number of channels per VM that are actually used and are
+      connected to some input source.
+      Maximum number of items - number of VMs.
+      Maximum value of each item - number of channels.
+      Minimum value of each item - 0 (which means entire VM sensor is not used).
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,vm-pre-scaler-x2:
+    description:
+      Defines the channels that use a mr76006 pre-scaler to divide the input
+      source by 2.
+      The pre-scaler is used for input sources that exceed the VM input range.
+      The driver uses this information to present to the user with the actual
+      value of the voltage source.
+      For channels that are not listed, no pre-scaler is assumed.
+      Maximum number of items - total number of channels in all VMs.
+      Each channel should not appear more than once.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,ts-series:
+    description:
+      Definition of the temperature equation and coefficients that shall be
+      used to convert the digital output to value in milli-Celsius.
+    minimum: 5
+    maximum: 6
+    default: 5
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation.
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    multipleOf: 1000
+    maximum: 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
 required:
   - compatible
   - reg
   - reg-names
-  - intel,vm-map
   - clocks
-  - resets
   - "#thermal-sensor-cells"
 
 additionalProperties: false
@@ -67,5 +156,9 @@ examples:
         intel,vm-map = [03 01 04 ff ff];
         clocks = <&osc0>;
         resets = <&rcu0 0x40 7>;
+        moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
+        moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
         #thermal-sensor-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
index 6e1d54ff5d5b..e1719839faf0 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -16,6 +16,7 @@ properties:
       - adi,adm1032
       - adi,adt7461
       - adi,adt7461a
+      - adi,adt7481
       - dallas,max6646
       - dallas,max6647
       - dallas,max6649
@@ -34,6 +35,7 @@ properties:
       - nxp,sa56004
       - onnn,nct1008
       - ti,tmp451
+      - ti,tmp461
       - winbond,w83l771
 
 
@@ -49,18 +51,137 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   vcc-supply:
     description: phandle to the regulator that provides the +VCC supply
 
+  ti,extended-range-enable:
+    description: Set to enable extended range temperature.
+    type: boolean
+
 required:
   - compatible
   - reg
 
+patternProperties:
+  "^channel@([0-2])$":
+    type: object
+    description: Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: The channel number. 0 is local channel, 1-2 are remote channels.
+        items:
+          minimum: 0
+          maximum: 2
+
+      label:
+        description: A descriptive name for this channel, like "ambient" or "psu".
+
+      temperature-offset-millicelsius:
+        description: Temperature offset to be added to or subtracted from remote temperature measurements.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,adt7461
+                - adi,adt7461a
+                - adi,adt7481
+                - ti,tmp451
+                - ti,tmp461
+    then:
+      properties:
+        ti,extended-range-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,max6646
+              - dallas,max6647
+              - dallas,max6649
+              - dallas,max6657
+              - dallas,max6658
+              - dallas,max6659
+              - dallas,max6695
+              - dallas,max6696
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adt7461
+              - adi,adt7461a
+              - adi,adt7481
+              - onnn,nct1008
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127750
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1032
+              - dallas,max6680
+              - dallas,max6681
+              - gmt,g781
+              - national,lm86
+              - national,lm89
+              - national,lm90
+              - national,lm99
+              - nxp,sa56004
+              - winbond,w83l771
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127875
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp451
+              - ti,tmp461
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127937
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/tegra-gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
@@ -71,8 +192,36 @@ examples:
             compatible = "onnn,nct1008";
             reg = <0x4c>;
             vcc-supply = <&palmas_ldo6_reg>;
-            interrupt-parent = <&gpio>;
-            interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
             #thermal-sensor-cells = <1>;
         };
     };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "adi,adt7481";
+        reg = <0x4c>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          label = "front";
+          temperature-offset-millicelsius = <4000>;
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          label = "back";
+          temperature-offset-millicelsius = <750>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
new file mode 100644
index 000000000000..358b262431fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT6775 and compatible Super I/O chips
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct6106
+      - nuvoton,nct6116
+      - nuvoton,nct6775
+      - nuvoton,nct6776
+      - nuvoton,nct6779
+      - nuvoton,nct6791
+      - nuvoton,nct6792
+      - nuvoton,nct6793
+      - nuvoton,nct6795
+      - nuvoton,nct6796
+      - nuvoton,nct6797
+      - nuvoton,nct6798
+
+  reg:
+    maxItems: 1
+
+  nuvoton,tsi-channel-mask:
+    description:
+      Bitmask indicating which TSI temperature sensor channels are
+      active.  LSB is TSI0, bit 1 is TSI1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0xff
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        superio@4d {
+            compatible = "nuvoton,nct6779";
+            reg = <0x4d>;
+            nuvoton,tsi-channel-mask = <0x03>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
index 4669217d01e1..80df7182ea28 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sensirion SHT15 humidity and temperature sensor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
index 7d49478d9668..159238efa9ed 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Christopher Ruehl chris.ruehl@gtsys.com.hk
 
 description: |
-  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
   designed especially for battery-driven high-volume consumer electronics
   applications.
   For further information refere to Documentation/hwmon/shtc1.rst
@@ -31,13 +31,13 @@ properties:
   sensirion,blocking-io:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the driver hold the i2c bus until measurement is finished.
+      If set, the driver holds the i2c bus until the measurement is finished.
 
   sensirion,low-precision:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the sensor aquire data with low precision (not recommended).
-      The driver aquire data with high precision by default.
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
index d3eff4fac107..c5a889e3e27b 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TMP102 temperature sensor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
index eda55bbc172d..dcbc6fbc3b48 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TMP108 temperature sensor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
new file mode 100644
index 000000000000..0e8ddf0ad789
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP401, TPM411 and TMP43x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+
+  Datasheets:
+  https://www.ti.com/lit/ds/symlink/tmp401.pdf
+  https://www.ti.com/lit/ds/symlink/tmp411.pdf
+  https://www.ti.com/lit/ds/symlink/tmp431.pdf
+  https://www.ti.com/lit/ds/symlink/tmp435.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp401
+      - ti,tmp411
+      - ti,tmp431
+      - ti,tmp432
+      - ti,tmp435
+
+  reg:
+    maxItems: 1
+
+  ti,extended-range-enable:
+    description:
+      When set, this sensor measures over extended temperature range.
+    type: boolean
+
+  ti,n-factor:
+    description:
+      value to be used for converting remote channel measurements to
+      temperature.
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -128
+    maximum: 127
+
+  ti,beta-compensation:
+    description:
+      value to select beta correction range.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+    then:
+      properties:
+        ti,n-factor: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+              - ti,tmp411
+    then:
+      properties:
+        ti,beta-compensation: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp401";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp431";
+        reg = <0x4c>;
+        ti,extended-range-enable;
+        ti,n-factor = <0x3b>;
+        ti,beta-compensation = <0x7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
index 36f649938fb7..a6f1fa75a67c 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
@@ -58,10 +58,9 @@ patternProperties:
         description: |
           The value (two's complement) to be programmed in the channel specific N correction register.
           For remote channels only.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 255
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
 
     required:
       - reg
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
new file mode 100644
index 000000000000..e7493e25a7d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP464 and TMP468 temperature sensors
+
+maintainers:
+  - Agathe Porte <agathe.porte@nokia.com>
+
+description: |
+  ±0.0625°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp464.pdf
+  https://www.ti.com/lit/ds/symlink/tmp468.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp464
+      - ti,tmp468
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-8])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-8 are remote channels.
+        items:
+          minimum: 0
+          maximum: 8
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <(-10)>;
+          label = "external";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          ti,n-factor = <0x10>;
+          label = "somelabel";
+        };
+
+        channel@3 {
+          reg = <0x3>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
index 9c27ed694bbb..4a4df4ffc460 100644
--- a/Documentation/devicetree/bindings/hwmon/vexpress.txt
+++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
 	"arm,vexpress-power"
 	"arm,vexpress-energy"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Optional node properties:
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
index 1b03810d4b4d..5a799246a373 100644
--- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 6ecb0270d88d..199a354ccb97 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson I2C Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Beniamino Galvani <b.galvani@gmail.com>
 
 allOf:
diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
new file mode 100644
index 000000000000..e58465d1b0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on ARM Ltd development platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-i2c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+...
+
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
index ea643e6c3ef5..869b4d633353 100644
--- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
 
 maintainers:
   - Rayn Chen <rayn_chen@aspeedtech.com>
@@ -63,7 +63,6 @@ examples:
     i2c0: i2c-bus@40 {
       #address-cells = <1>;
       #size-cells = <0>;
-      #interrupt-cells = <1>;
       compatible = "aspeed,ast2500-i2c-bus";
       reg = <0x40 0x40>;
       clocks = <&syscon ASPEED_CLK_APB>;
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
new file mode 100644
index 000000000000..ea2303c0e143
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-i2c
+              - atmel,at91sam9261-i2c
+              - atmel,at91sam9260-i2c
+              - atmel,at91sam9g20-i2c
+              - atmel,at91sam9g10-i2c
+              - atmel,at91sam9x5-i2c
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+      - items:
+          - const: microchip,sama7g5-i2c
+          - const: microchip,sam9x60-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    items:
+      - description: TX DMA Channel Specifier
+      - description: RX DMA Channel Specifier
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for
+      FIFO capable I2C controllers.
+
+  scl-gpios: true
+
+  sda-gpios: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+allOf:
+  - $ref: "i2c-controller.yaml"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+              - microchip,sama7g5-i2c
+    then:
+      properties:
+        i2c-sda-hold-time-ns:
+          description:
+            TWD hold time
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0: i2c@fff84000 {
+        compatible = "atmel,at91sam9g20-i2c";
+        reg = <0xfff84000 0x100>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&twi0_clk>;
+        clock-frequency = <400000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c512";
+            reg = <0x50>;
+            pagesize = <128>;
+        };
+    };
+
+    i2c1: i2c@f8034600 {
+        compatible = "atmel,sama5d2-i2c";
+        reg = <0xf8034600 0x100>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(11)>,
+               <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(12)>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&flx0>;
+        atmel,fifo-size = <16>;
+        i2c-sda-hold-time-ns = <336>;
+        pinctrl-names = "default", "gpio";
+        pinctrl-0 = <&pinctrl_i2c0>;
+        pinctrl-1 = <&pinctrl_i2c0_gpio>;
+        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+        eeprom@54 {
+            compatible = "atmel,24c02";
+            reg = <0x54>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
deleted file mode 100644
index a8a35df41951..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Broadcom BCM2835 I2C controller
-
-Required properties:
-- compatible : Should be one of:
-	"brcm,bcm2711-i2c"
-	"brcm,bcm2835-i2c"
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks : The clock feeding the I2C controller.
-
-Recommended properties:
-- clock-frequency : desired I2C bus clock frequency in Hz.
-
-Example:
-
-i2c@7e205000 {
-	compatible = "brcm,bcm2835-i2c";
-	reg = <0x7e205000 0x1000>;
-	interrupts = <2 21>;
-	clocks = <&clk_i2c>;
-	clock-frequency = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
new file mode 100644
index 000000000000..8256490a7af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 I2C controller
+
+maintainers:
+  - Stephen Warren <swarren@wwwdotorg.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - brcm,bcm2835-i2c
+      - items:
+          - const: brcm,bcm2711-i2c
+          - const: brcm,bcm2835-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7e205000 {
+        compatible = "brcm,bcm2835-i2c";
+        reg = <0x7e205000 0x1000>;
+        interrupts = <2 21>;
+        clocks = <&clk_i2c>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index 1ca1cd19bd1d..2e95cda7262a 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Cadence I2C controller Device Tree Bindings
+title: Cadence I2C controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index b386e4128a79..6e1c70e9275e 100644
--- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -10,7 +10,6 @@ title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
 maintainers:
   - Doug Anderson <dianders@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On some ChromeOS board designs we've got a connection to the EC
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
deleted file mode 100644
index 2015f50aed0f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-I2C for Atmel platforms
-
-Required properties :
-- compatible : Must be one of:
-	"atmel,at91rm9200-i2c",
-	"atmel,at91sam9261-i2c",
-	"atmel,at91sam9260-i2c",
-	"atmel,at91sam9g20-i2c",
-	"atmel,at91sam9g10-i2c",
-	"atmel,at91sam9x5-i2c",
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for:
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- scl-gpios: specify the gpio related to SCL pin
-- sda-gpios: specify the gpio related to SDA pin
-- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
-  bus recovery, call it "gpio" state
-- Child nodes conforming to i2c bus binding
-
-
-Examples :
-
-i2c0: i2c@fff84000 {
-	compatible = "atmel,at91sam9g20-i2c";
-	reg = <0xfff84000 0x100>;
-	interrupts = <12 4 6>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&twi0_clk>;
-	clock-frequency = <400000>;
-
-	24c512@50 {
-		compatible = "atmel,24c512";
-		reg = <0x50>;
-		pagesize = <128>;
-	}
-}
-
-i2c0: i2c@f8034600 {
-	compatible = "atmel,sama5d2-i2c";
-	reg = <0xf8034600 0x100>;
-	interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-	dmas = <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(11)>,
-	       <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(12)>;
-	dma-names = "tx", "rx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&flx0>;
-	atmel,fifo-size = <16>;
-	i2c-sda-hold-time-ns = <336>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
deleted file mode 100644
index 3b30e54ae3c7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Energymicro efm32 i2c controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "energymicro,efm32-i2c"
- - interrupts : the interrupt number
- - clocks : reference to the module clock
-
-Recommended properties :
-
- - clock-frequency : maximal I2C bus clock frequency in Hz.
- - energymicro,location : Decides the location of the USART I/O pins.
-   Allowed range : [0 .. 6]
-
-Example:
-	i2c0: i2c@4000a000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "energymicro,efm32-i2c";
-		reg = <0x4000a000 0x400>;
-		interrupts = <9>;
-		clocks = <&cmu clk_HFPERCLKI2C0>;
-		clock-frequency = <100000>;
-		energymicro,location = <3>;
-
-		eeprom@50 {
-			compatible = "microchip,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
deleted file mode 100644
index 2dbc0b62daa6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung's High Speed I2C controller
-
-The Samsung's High Speed I2C controller is used to interface with I2C devices
-at various speeds ranging from 100khz to 3.4Mhz.
-
-Required properties:
-  - compatible: value should be.
-	-> "samsung,exynos5-hsi2c", (DEPRECATED)
-				for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5260 SoCs.
-	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
-				on Exynos7 SoCs.
-
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - #address-cells: always 1 (for i2c addresses)
-  - #size-cells: always 0
-
-  - Pinctrl:
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - clock-frequency: Desired operating frequency in Hz of the bus.
-    -> If not specified, the bus operates in fast-speed mode at
-       at 100khz.
-    -> If specified, the bus operates in high-speed mode only if the
-       clock-frequency is >= 1Mhz.
-
-Example:
-
-hsi2c@12ca0000 {
-	compatible = "samsung,exynos5250-hsi2c";
-	reg = <0x12ca0000 0x100>;
-	interrupts = <56>;
-	clock-frequency = <100000>;
-
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 000000000000..3e52a0db6c41
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+  In case the HSI2C controller is encapsulated within USI block (it's the case
+  e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to
+  define USI node in device tree file, choosing "i2c" configuration. Please see
+  Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov9-hsi2c
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c@12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hsi2c_2: i2c@138c0000 {
+        compatible = "samsung,exynosautov9-hsi2c";
+        reg = <0x138c0000 0xc0>;
+        interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+                 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+        clock-names = "hsi2c", "hsi2c_pclk";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
index 66472f12a7e2..0cdc3e890df7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
@@ -31,9 +31,8 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         ak8975@c {
-            compatible = "ak,ak8975";
+            compatible = "asahi-kasei,ak8975";
             reg = <0x0c>;
         };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
index fe0c89edf7c1..4656f5112b84 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -20,7 +20,10 @@ properties:
       - items:
           - enum:
               - fsl,imx8qxp-lpi2c
+              - fsl,imx8dxl-lpi2c
               - fsl,imx8qm-lpi2c
+              - fsl,imx8ulp-lpi2c
+              - fsl,imx93-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
@@ -35,10 +38,22 @@ properties:
   clock-frequency: true
 
   clock-names:
-    maxItems: 1
+    items:
+      - const: per
+      - const: ipg
 
   clocks:
-    maxItems: 1
+    maxItems: 2
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
 
   power-domains:
     maxItems: 1
@@ -61,5 +76,6 @@ examples:
         reg = <0x40A50000 0x10000>;
         interrupt-parent = <&intc>;
         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clks IMX7ULP_CLK_LPI2C7>;
+        clocks = <&clks IMX7ULP_CLK_LPI2C7>,
+                 <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index c167958ae2a9..85ee1282d6d2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -19,6 +19,17 @@ properties:
       - const: fsl,imx21-i2c
       - const: fsl,vf610-i2c
       - items:
+          - enum:
+              - fsl,ls1012a-i2c
+              - fsl,ls1021a-i2c
+              - fsl,ls1028a-i2c
+              - fsl,ls1043a-i2c
+              - fsl,ls1046a-i2c
+              - fsl,ls1088a-i2c
+              - fsl,ls208xa-i2c
+              - fsl,lx2160a-i2c
+          - const: fsl,vf610-i2c
+      - items:
           - const: fsl,imx35-i2c
           - const: fsl,imx1-i2c
       - items:
@@ -88,9 +99,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/imx5-clock.h>
-    #include <dt-bindings/clock/vf610-clock.h>
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c@83fc4000 {
         compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -99,6 +108,9 @@ examples:
         clocks = <&clks IMX5_CLK_I2C2_GATE>;
     };
 
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
     i2c@40066000 {
         compatible = "fsl,vf610-i2c";
         reg = <0x40066000 0x1000>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 98c6fcf7bf26..018e1b944424 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -73,6 +73,7 @@ examples:
         clock-frequency = <100000>;
     };
 
+  - |
     /* MPC5200B based board */
     i2c@3d00 {
         #address-cells = <1>;
@@ -84,6 +85,7 @@ examples:
         fsl,preserve-clocking;
     };
 
+  - |
     /* MPC8544 base board */
     i2c@3100 {
         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
deleted file mode 100644
index 5ea216ae7084..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
-      "mediatek,mt2712-i2c": for MediaTek MT2712
-      "mediatek,mt6577-i2c": for MediaTek MT6577
-      "mediatek,mt6589-i2c": for MediaTek MT6589
-      "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
-      "mediatek,mt7622-i2c": for MediaTek MT7622
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
-      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
-      "mediatek,mt8173-i2c": for MediaTek MT8173
-      "mediatek,mt8183-i2c": for MediaTek MT8183
-      "mediatek,mt8192-i2c": for MediaTek MT8192
-      "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
-      "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
-  - reg: physical base address of the controller and dma base, length of memory
-    mapped region.
-  - interrupts: interrupt number to the cpu.
-  - clock-div: the fixed value for frequency divider of clock source in i2c
-    module. Each IC may be different.
-  - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
-    one bus has more than two i2c controllers, if enable have-pmic need include
-    "pmic" extra.
-
-Optional properties:
-  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-    is 100000.
-  - mediatek,have-pmic: platform can control i2c form special pmic side.
-    Only mt6589 and mt8135 support this feature.
-  - mediatek,use-push-pull: IO config use push-pull mode.
-  - vbus-supply: phandle to the regulator that provides power to SCL/SDA.
-
-Example:
-
-	i2c0: i2c@1100d000 {
-			compatible = "mediatek,mt6577-i2c";
-			reg = <0x1100d000 0x70>,
-			      <0x11000300 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-			clock-frequency = <400000>;
-			mediatek,have-pmic;
-			clock-div = <16>;
-			clocks = <&i2c0_ck>, <&ap_dma_ck>;
-			clock-names = "main", "dma";
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
new file mode 100644
index 000000000000..4e730fb7be56
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in
+  various MediaTek SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Qii Wang <qii.wang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt2712-i2c
+      - const: mediatek,mt6577-i2c
+      - const: mediatek,mt6589-i2c
+      - const: mediatek,mt7622-i2c
+      - const: mediatek,mt8168-i2c
+      - const: mediatek,mt8173-i2c
+      - const: mediatek,mt8183-i2c
+      - const: mediatek,mt8186-i2c
+      - const: mediatek,mt8188-i2c
+      - const: mediatek,mt8192-i2c
+      - items:
+          - enum:
+              - mediatek,mt7629-i2c
+              - mediatek,mt8516-i2c
+          - const: mediatek,mt2712-i2c
+      - items:
+          - enum:
+              - mediatek,mt2701-i2c
+              - mediatek,mt6797-i2c
+              - mediatek,mt7623-i2c
+          - const: mediatek,mt6577-i2c
+      - items:
+          - enum:
+              - mediatek,mt8195-i2c
+          - const: mediatek,mt8192-i2c
+
+  reg:
+    items:
+      - description: Physical base address
+      - description: DMA base address
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Main clock for I2C bus
+      - description: Clock for I2C via DMA
+      - description: Bus arbitrator clock
+      - description: Clock for I2C from PMIC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: main
+      - const: dma
+      - const: arb
+      - const: pmic
+
+  clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency divider of clock source in I2C module
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  mediatek,have-pmic:
+    description: Platform controls I2C from PMIC side
+    type: boolean
+
+  mediatek,use-push-pull:
+    description: Use push-pull mode I/O config
+    type: boolean
+
+  vbus-supply:
+    description: Phandle to the regulator providing power to SCL/SDA
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-div
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1100d000 {
+      compatible = "mediatek,mt6577-i2c";
+      reg = <0x1100d000 0x70>, <0x11000300 0x80>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&i2c0_ck>, <&ap_dma_ck>;
+      clock-names = "main", "dma";
+      clock-div = <16>;
+      clock-frequency = <400000>;
+      mediatek,have-pmic;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt b/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
deleted file mode 100644
index bc36f0eb94cd..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek MT7621/MT7628 I2C master controller
-
-Required properties:
-
-- compatible: Should be one of the following:
-  - "mediatek,mt7621-i2c": for MT7621/MT7628/MT7688 platforms
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: Address and length of the register set for the device
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-
-Optional properties :
-
-Example:
-
-i2c: i2c@900 {
-	compatible = "mediatek,mt7621-i2c";
-	reg = <0x900 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	resets = <&rstctrl 16>;
-	reset-names = "i2c";
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
deleted file mode 100644
index d4cf10582a26..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-GPIO-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses GPIOs to
-route the I2C signals.
-
-                                  +-----+  +-----+
-                                  | dev |  | dev |
-    +------------+                +-----+  +-----+
-    | SoC        |                   |        |
-    |            |          /--------+--------+
-    |   +------+ |  +------+    child bus A, on GPIO value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
-    |            |     |    \----------+--------+--------+
-    |   +------+ |     |               |        |        |
-    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
-    |   +------+ |                  | dev |  | dev |  | dev |
-    +------------+                  +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-gpio
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-Optional properties:
-- idle-state: value to set the muxer to when idle. When no value is
-  given, it defaults to the last value used.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be output using the list of
-GPIOs, the first in the list holding the least-significant value.
-
-If an idle state is defined, using the idle-state (optional) property,
-whenever an access is not being made to a device on a child bus, the
-GPIOs will be set according to the idle value.
-
-If an idle state is not defined, the most recently used value will be
-left programmed into hardware whenever no access is being made to a
-device on a child bus.
-
-Example:
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
new file mode 100644
index 000000000000..6e0a5686af04
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals.
+
+                                  +-----+  +-----+
+                                  | dev |  | dev |
+    +------------+                +-----+  +-----+
+    | SoC        |                   |        |
+    |            |          /--------+--------+
+    |   +------+ |  +------+    child bus A, on GPIO value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
+    |            |     |    \----------+--------+--------+
+    |   +------+ |     |               |        |        |
+    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
+    |   +------+ |                  | dev |  | dev |  | dev |
+    +------------+                  +-----+  +-----+  +-----+
+
+  For each I2C child node, an I2C child bus will be created. They will be numbered based on their
+  order in the device tree.
+
+  Whenever an access is made to a device on a child bus, the value set in the relevant node's reg
+  property will be output using the list of GPIOs, the first in the list holding the least-
+  significant value.
+
+  If an idle state is defined, using the idle-state (optional) property, whenever an access is not
+  being made to a device on a child bus, the GPIOs will be set according to the idle value.
+
+  If an idle state is not defined, the most recently used value will be left programmed into
+  hardware whenever no access is being made to a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-gpio
+
+  i2c-parent:
+    description: phandle of the I2C bus that this multiplexer's master-side port is connected to
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+  mux-gpios:
+    description: list of GPIOs used to control the muxer
+    minItems: 1
+    maxItems: 4  # Should be enough
+
+  idle-state:
+    description: Value to set the muxer to when idle. When no value is given, it defaults to the
+      last value used.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-gpios
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>;
+      i2c-parent = <&i2c1>;
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssd1307: oled@3c {
+          compatible = "solomon,ssd1307fb-i2c";
+          reg = <0x3c>;
+          pwms = <&pwm 4 3000>;
+          reset-gpios = <&gpio2 7 1>;
+        };
+      };
+
+      i2c@3 {
+        reg = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pca9555: pca9555@20 {
+          compatible = "nxp,pca9555";
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x20>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
index 9b0603a72f40..b6af924dee2e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -28,7 +28,6 @@ description: |+
       '------------'                  '-----'  '-----'  '-----'
 
 
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
deleted file mode 100644
index 997a287ed3f6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
-                                 +-----+  +-----+
-                                 | dev |  | dev |
-    +------------------------+   +-----+  +-----+
-    | SoC                    |      |        |
-    |                   /----|------+--------+
-    |   +---+   +------+     | child bus A, on first set of pins
-    |   |I2C|---|Pinmux|     |
-    |   +---+   +------+     | child bus B, on second set of pins
-    |                   \----|------+--------+--------+
-    |                        |      |        |        |
-    +------------------------+  +-----+  +-----+  +-----+
-                                | dev |  | dev |  | dev |
-                                +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
-  bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
-	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
-	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
-	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c1>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 000000000000..2e3d555eb96c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
deleted file mode 100644
index 72065b0ff680..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-I2C for Nomadik based systems
-
-Required (non-standard) properties:
- - Nil
-
-Recommended (non-standard) properties:
- - clock-frequency : Maximum bus clock frequency for the device
-
-Optional (non-standard) properties:
- - Nil
-
-Example :
-
-i2c@80004000 {
-        compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-        reg = <0x80004000 0x1000>;
-        interrupts = <0 21 0x4>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        v-i2c-supply = <&db8500_vape_reg>;
-
-        clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
deleted file mode 100644
index a37c9455b244..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device tree configuration for i2c-ocores
-
-Required properties:
-- compatible      : "opencores,i2c-ocores"
-                    "aeroflexgaisler,i2cmst"
-                    "sifive,fu540-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU540-C000 SoC.
-                    "sifive,fu740-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU740-C000 SoC.
-                    Please refer to sifive-blocks-ip-versioning.txt for
-                    additional details.
-- reg             : bus address start and address range size of device
-- clocks          : handle to the controller clock; see the note below.
-                    Mutually exclusive with opencores,ip-clock-frequency
-- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
-                    see the note below. Mutually exclusive with clocks
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- interrupts      : interrupt number.
-- clock-frequency : frequency of bus clock in Hz; see the note below.
-                    Defaults to 100 KHz when the property is not specified
-- reg-shift       : device register offsets are shifted by this value
-- reg-io-width    : io register width in bytes (1, 2 or 4)
-- regstep         : deprecated, use reg-shift above
-
-Note
-clock-frequency property is meant to control the bus frequency for i2c bus
-drivers, but it was incorrectly used to specify i2c controller input clock
-frequency. So the following rules are set to fix this situation:
-- if clock-frequency is present and neither opencores,ip-clock-frequency nor
-  clocks are, then clock-frequency specifies i2c controller clock frequency.
-  This is to keep backwards compatibility with setups using old DTB. i2c bus
-  frequency is fixed at 100 KHz.
-- if clocks is present it specifies i2c controller clock. clock-frequency
-  property specifies i2c bus frequency.
-- if opencores,ip-clock-frequency is present it specifies i2c controller
-  clock frequency. clock-frequency property specifies i2c bus frequency.
-
-Examples:
-
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		opencores,ip-clock-frequency = <20000000>;
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
-or
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		clocks = <&osc>;
-		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
deleted file mode 100644
index 7b9fc0c22eaf..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Qualcomm Camera Control Interface (CCI) I2C controller
-
-PROPERTIES:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		"qcom,msm8916-cci"
-		"qcom,msm8996-cci"
-		"qcom,sdm845-cci"
-		"qcom,sm8250-cci"
-
-- reg
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address CCI I2C controller and length of memory
-		    mapped region.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: specifies the CCI I2C interrupt. The format of the
-		    specifier is defined by the binding document describing
-		    the node's interrupt parent.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a list of phandle, should contain an entry for each
-		    entries in clock-names.
-
-- clock-names
-	Usage: required
-	Value type: <string>
-	Definition: a list of clock names, must include "cci" clock.
-
-- power-domains
-	Usage: required for "qcom,msm8996-cci"
-	Value type: <prop-encoded-array>
-	Definition:
-
-SUBNODES:
-
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
-sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
-
-PROPERTIES:
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: Index of the CCI bus/master
-
-- clock-frequency:
-	Usage: optional
-	Value type: <u32>
-	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
-		    kHz if omitted.
-
-Example:
-
-	cci@a0c000 {
-		compatible = "qcom,msm8996-cci";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xa0c000 0x1000>;
-		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
-			 <&mmcc CAMSS_TOP_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_CLK>,
-			 <&mmcc CAMSS_AHB_CLK>;
-		clock-names = "mmss_mmagic_ahb",
-			      "camss_top_ahb",
-			      "cci_ahb",
-			      "cci",
-			      "camss_ahb";
-
-		i2c-bus@0 {
-			reg = <0>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c-bus@1 {
-			reg = <1>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 5339dd4fc370..82b9d6682297 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -29,6 +29,7 @@ properties:
       - items:
           - enum:
               - rockchip,rk3036-i2c
+              - rockchip,rk3128-i2c
               - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
@@ -37,6 +38,8 @@ properties:
               - rockchip,rk3308-i2c
               - rockchip,rk3328-i2c
               - rockchip,rk3568-i2c
+              - rockchip,rk3588-i2c
+              - rockchip,rv1126-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
deleted file mode 100644
index 66ae46d3bc2f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung's I2C controller
-
-The Samsung's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
-      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
-      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
-          inside HDMIPHY block found on several samsung SoCs
-      (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
-	   a host to SATA PHY controller on an internal bus.
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-
-Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
-  - Samsung GPIO variant (deprecated):
-    - gpios: The order of the gpios should be the following: <SDA, SCL>.
-      The gpio specifier depends on the gpio controller. Required in all
-      cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
-      lines are permanently wired to the respective clienta
-  - Pinctrl variant (preferred, if available):
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
-    specified, default value is 0.
-  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
-    specified, the default value in Hz is 100000.
-  - samsung,sysreg-phandle - handle to syscon used to control the system registers
-
-Example:
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <345>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		/* Samsung GPIO variant begins here */
-		gpios = <&gpd1 2 0 /* SDA */
-			 &gpd1 3 0 /* SCL */>;
-		/* Samsung GPIO variant ends here */
-		/* Pinctrl variant begins here */
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		/* Pinctrl variant ends here */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
deleted file mode 100644
index 361d31c51b6f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-i2c Controller on ARM Versatile platform:
-
-Required properties:
-- compatible : Must be "arm,versatile-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index b864916e087f..fc3dd7ec0445 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -95,6 +95,10 @@ wants to support one of the below features, it should adapt these bindings.
 - smbus-alert
 	states that the optional SMBus-Alert feature apply to this bus.
 
+- mctp-controller
+	indicates that the system is accessible via this bus as an endpoint for
+	MCTP over I2C transport.
+
 Required properties (per child device)
 --------------------------------------
 
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
index febde6cc5f69..af6d64a6da6e 100644
--- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -69,8 +69,7 @@ examples:
       #size-cells = <0>;
       reg = <0x10054000 0x1000>;
 
-      interrupt-parent = <&intc>;
-      interrupts = <56>;
+      interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
 
       clocks = <&cgu JZ4780_CLK_SMB4>;
       pinctrl-names = "default";
@@ -86,7 +85,6 @@ examples:
         compatible = "nxp,pcf8563";
         reg = <0x51>;
 
-        interrupt-parent = <&gpf>;
         interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
       };
     };
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index f771c09aabfc..93c164aa00da 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MV64XXX I2C Controller Device Tree Bindings
+title: Marvell MV64XXX I2C Controller
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
@@ -21,10 +21,18 @@ properties:
           - enum:
               - allwinner,sun8i-a23-i2c
               - allwinner,sun8i-a83t-i2c
+              - allwinner,sun8i-v536-i2c
               - allwinner,sun50i-a64-i2c
-              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h6-i2c
+          - const: allwinner,sun6i-a31-i2c
+      - description: Allwinner SoCs with offload support
+        items:
+          - enum:
+              - allwinner,sun20i-d1-i2c
+              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h616-i2c
+              - allwinner,sun50i-r329-i2c
+          - const: allwinner,sun8i-v536-i2c
           - const: allwinner,sun6i-a31-i2c
       - const: marvell,mv64xxx-i2c
       - const: marvell,mv78230-i2c
@@ -58,6 +66,19 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+dependencies:
+  dmas: [ dma-names ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
new file mode 100644
index 000000000000..118ec00fc190
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/mediatek,mt7621-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Stefan Roese <sr@denx.de>
+
+title: Mediatek MT7621/MT7628 I2C master controller
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: i2c
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2c
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    i2c: i2c@900 {
+      compatible = "mediatek,mt7621-i2c";
+      reg = <0x900 0x100>;
+      clocks = <&sysc MT7621_CLK_I2C>;
+      clock-names = "i2c";
+      resets = <&sysc MT7621_RST_I2C>;
+      reset-names = "i2c";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&i2c_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
deleted file mode 100644
index 93198d5d43a6..000000000000
--- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mellanox I2C SMBus on BlueField SoCs
-
-maintainers:
-  - Khalil Blaiech <kblaiech@nvidia.com>
-
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
-properties:
-  compatible:
-    enum:
-      - mellanox,i2c-mlxbf1
-      - mellanox,i2c-mlxbf2
-
-  reg:
-    minItems: 3
-    items:
-      - description: Smbus block registers
-      - description: Cause master registers
-      - description: Cause slave registers
-      - description: Cause coalesce registers
-
-  interrupts:
-    maxItems: 1
-
-  clock-frequency:
-    enum: [ 100000, 400000, 1000000 ]
-    description:
-      bus frequency used to configure timing registers;
-      The frequency is expressed in Hz. Default is 100000.
-
-required:
-  - compatible
-  - reg
-  - interrupts
-
-unevaluatedProperties: false
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - mellanox,i2c-mlxbf1
-
-then:
-  properties:
-    reg:
-      maxItems: 3
-
-examples:
-  - |
-    i2c@2804000 {
-        compatible = "mellanox,i2c-mlxbf1";
-        reg = <0x02804000 0x800>,
-              <0x02801200 0x020>,
-              <0x02801260 0x020>;
-        interrupts = <57>;
-        clock-frequency = <100000>;
-    };
-
-  - |
-    i2c@2808800 {
-        compatible = "mellanox,i2c-mlxbf2";
-        reg = <0x02808800 0x600>,
-              <0x02808e00 0x020>,
-              <0x02808e20 0x020>,
-              <0x02808e40 0x010>;
-        interrupts = <57>;
-        clock-frequency = <400000>;
-    };
diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
new file mode 100644
index 000000000000..afa3db726229
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+      - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg 15>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
index 128444942aec..00eb6ff6f5b1 100644
--- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -4,20 +4,21 @@
 $id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+title: nuvoton NPCM7XX I2C Controller
 
 description: |
-  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
-  both master and slave mode. Each controller can switch between master and slave
-  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
-  RX.
+  I2C bus controllers of the NPCM series support both master and
+  slave mode. Each controller can switch between master and slave at run time
+  (i.e. IPMB mode). HW FIFO for TX and RX are supported.
 
 maintainers:
   - Tali Perry <tali.perry1@gmail.com>
 
 properties:
   compatible:
-    const: nuvoton,npcm750-i2c
+    enum:
+      - nuvoton,npcm750-i2c
+      - nuvoton,npcm845-i2c
 
   reg:
     maxItems: 1
@@ -36,6 +37,10 @@ properties:
     default: 100000
     enum: [100000, 400000, 1000000]
 
+  nuvoton,sys-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of system manager register node.
+
 required:
   - compatible
   - reg
@@ -44,6 +49,15 @@ required:
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,npcm845-i2c
+
+    then:
+      required:
+        - nuvoton,sys-mgr
 
 unevaluatedProperties: false
 
@@ -57,6 +71,7 @@ examples:
         clock-frequency = <100000>;
         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
         compatible = "nuvoton,npcm750-i2c";
+        nuvoton,sys-mgr = <&gcr>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
deleted file mode 100644
index ab240e10debc..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra186 BPMP I2C controller
-
-In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
-devices, such as the I2C controller for the power management I2C bus. Software
-running on other CPUs must perform IPC to the BPMP in order to execute
-transactions on that I2C bus. This binding describes an I2C bus that is
-accessed in such a fashion.
-
-The BPMP I2C node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents an I2C controller. See ../i2c/i2c.txt for details of the
-core I2C binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-i2c".
-- #address-cells: Address cells for I2C device address.
-    Single-cell integer.
-    Must be <1>.
-- #size-cells:
-    Single-cell integer.
-    Must be <0>.
-- nvidia,bpmp-bus-id:
-    Single-cell integer.
-    Indicates the I2C bus number this DT node represent, as defined by the
-    BPMP firmware.
-
-Example:
-
-bpmp {
-	...
-
-	i2c {
-		compatible = "nvidia,tegra186-bpmp-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		nvidia,bpmp-bus-id = <5>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
new file mode 100644
index 000000000000..b8319dcf3d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP I2C controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186 and later, the BPMP (Boot and Power Management Processor)
+  owns certain HW devices, such as the I2C controller for the power
+  management I2C bus. Software running on other CPUs must perform IPC to
+  the BPMP in order to execute transactions on that I2C bus. This
+  binding describes an I2C bus that is accessed in such a fashion.
+
+  The BPMP I2C node must be located directly inside the main BPMP node.
+  See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
+  binding.
+
+  This node represents an I2C controller. See ../i2c/i2c.txt for details
+  of the core I2C binding.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-bpmp-i2c
+
+  nvidia,bpmp-bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Indicates the I2C bus number this DT node represents,
+      as defined by the BPMP firmware.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - nvidia,bpmp-bus-id
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
deleted file mode 100644
index 3f2f990c2e62..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
-
-Required properties:
-- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
-  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
-  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
-  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
-  tegra124, tegra132, or tegra210.
-  Details of compatible are as follows:
-  nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
-	controller. This only support master mode of I2C communication. Register
-	interface/offset and interrupts handling are different than generic I2C
-	controller. Driver of DVC I2C controller is only compatible with
-	"nvidia,tegra20-i2c-dvc".
-  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
-	master and slave mode of I2C communication. The i2c-tegra driver only
-	support master mode of I2C communication. Driver of I2C controller is
-	only compatible with "nvidia,tegra20-i2c".
-  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
-	very much similar to Tegra20 I2C controller with additional feature:
-	Continue Transfer Support. This feature helps to implement M_NO_START
-	as per I2C core API transfer flags. Driver of I2C controller is
-	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
-	support. This is also compatible with "nvidia,tegra20-i2c" without
-	continue transfer support.
-  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
-	very much similar to Tegra30 I2C controller with some hardware
-	modification:
-	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
-	   fast-clk. Tegra114 has only one clock source called as div-clk and
-	   hence clock mechanism is changed in I2C controller.
-	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
-	   default and there is no way to disable it. Tegra114 has this
-	   interrupt disable by default and SW need to enable explicitly.
-	Due to above changes, Tegra114 I2C driver makes incompatible with
-	previous hardware driver. Hence, tegra114 I2C controller is compatible
-	with "nvidia,tegra114-i2c".
-  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus
-	and is part of VE power domain and typically used for camera use-cases.
-	This VI I2C controller is mostly compatible with the programming model
-	of the regular I2C controllers with a few exceptions. The I2C registers
-	start at an offset of 0xc00 (instead of 0), registers are 16 bytes
-	apart (rather than 4) and the controller does not support slave mode.
-- reg: Should contain I2C controller registers physical address and length.
-- interrupts: Should contain I2C controller interrupts.
-- address-cells: Address cells for I2C device address.
-- size-cells: Size of the I2C device address.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  Tegra20/Tegra30:
-  - div-clk
-  - fast-clk
-  Tegra114:
-  - div-clk
-  Tegra210:
-  - div-clk
-  - slow (only for nvidia,tegra210-i2c-vi compatible node)
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - i2c
-- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must
-  include venc powergate node as vi i2c is part of VE power domain.
-  tegra210-i2c-vi:
-  - pd_venc
-- dmas: Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names: Must include the following entries:
-  - rx
-  - tx
-
-Example:
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <0 38 0x04>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car 12>, <&tegra_car 124>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 000000000000..424a4fc218b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+  compatible:
+    oneOf:
+      - description: Tegra20 has 4 generic I2C controller. This can support
+          master and slave mode of I2C communication. The i2c-tegra driver
+          only support master mode of I2C communication. Driver of I2C
+          controller is only compatible with "nvidia,tegra20-i2c".
+        const: nvidia,tegra20-i2c
+      - description: Tegra20 has specific I2C controller called as DVC I2C
+          controller. This only support master mode of I2C communication.
+          Register interface/offset and interrupts handling are different than
+          generic I2C controller. Driver of DVC I2C controller is only
+          compatible with "nvidia,tegra20-i2c-dvc".
+        const: nvidia,tegra20-i2c-dvc
+      - description: |
+          Tegra30 has 5 generic I2C controller. This controller is very much
+          similar to Tegra20 I2C controller with additional feature: Continue
+          Transfer Support. This feature helps to implement M_NO_START as per
+          I2C core API transfer flags. Driver of I2C controller is compatible
+          with "nvidia,tegra30-i2c" to enable the continue transfer support.
+          This is also compatible with "nvidia,tegra20-i2c" without continue
+          transfer support.
+        items:
+          - const: nvidia,tegra30-i2c
+          - const: nvidia,tegra20-i2c
+      - description: |
+          Tegra114 has 5 generic I2C controllers. This controller is very much
+          similar to Tegra30 I2C controller with some hardware modification:
+            - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+              and fast-clk. Tegra114 has only one clock source called as
+              div-clk and hence clock mechanism is changed in I2C controller.
+            - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+              by default and there is no way to disable it. Tegra114 has this
+              interrupt disable by default and SW need to enable explicitly.
+          Due to above changes, Tegra114 I2C driver makes incompatible with
+          previous hardware driver. Hence, Tegra114 I2C controller is
+          compatible with "nvidia,tegra114-i2c".
+        const: nvidia,tegra114-i2c
+      - description: |
+          Tegra124 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra114 but also contain several hardware
+          improvements and new registers.
+        const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra124.
+        items:
+          - const: nvidia,tegra210-i2c
+          - const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has one I2C controller that is on host1x bus and is part of
+          the VE power domain and typically used for camera use-cases. This VI
+          I2C controller is mostly compatible with the programming model of
+          the regular I2C controllers with a few exceptions. The I2C registers
+          start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+          apart (rather than 4) and the controller does not support slave
+          mode.
+        const: nvidia,tegra210-i2c-vi
+      - description: |
+          Tegra186 has 9 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra210.
+        const: nvidia,tegra186-i2c
+      - description: |
+          Tegra194 has 8 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra186. However, these controllers have
+          support for 64 KiB transactions whereas earlier chips supported no
+          more than 4 KiB per transactions.
+        const: nvidia,tegra194-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: i2c
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-i2c
+              - nvidia,tegra30-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: fast-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c-vi
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: slow
+        power-domains:
+          items:
+            - description: phandle to the VENC power domain
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7000c000 {
+        compatible = "nvidia,tegra20-i2c";
+        reg = <0x7000c000 0x100>;
+        interrupts = <0 38 0x04>;
+        clocks = <&tegra_car 12>, <&tegra_car 124>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 12>;
+        reset-names = "i2c";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 000000000000..85d9efb743ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
new file mode 100644
index 000000000000..cf9f8fda595f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8226-cci
+      - qcom,msm8916-cci
+      - qcom,msm8974-cci
+      - qcom,msm8996-cci
+      - qcom,sdm845-cci
+      - qcom,sm8250-cci
+      - qcom,sm8450-cci
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^i2c-bus@[01]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clock-frequency:
+        default: 100000
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-cci
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8916-cci
+    then:
+      properties:
+        i2c-bus@1: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8974-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-cci
+              - qcom,msm8996-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+            - const: camss_ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-cci
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cci@ac4a000 {
+        reg = <0x0ac4a000 0x4000>;
+        compatible = "qcom,sdm845-cci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                 <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                 <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                 <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+        clock-names = "camnoc_axi",
+                      "soc_ahb",
+                      "slow_ahb_src",
+                      "cpas_ahb",
+                      "cci",
+                      "cci_src";
+
+        assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                          <&clock_camcc CAM_CC_CCI_CLK>;
+        assigned-clock-rates = <80000000>,
+                               <37500000>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cci0_default &cci1_default>;
+        pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@10 {
+                compatible = "ovti,ov8856";
+                reg = <0x10>;
+
+                reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam0_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                clock-names = "xvclk";
+                clock-frequency = <19200000>;
+
+                dovdd-supply = <&vreg_lvs1a_1p8>;
+                avdd-supply = <&cam0_avdd_2v8>;
+                dvdd-supply = <&cam0_dvdd_1v2>;
+
+                port {
+                    ov8856_ep: endpoint {
+                        link-frequencies = /bits/ 64 <360000000 180000000>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csiphy0_ep>;
+                    };
+                };
+            };
+        };
+
+        cci_i2c1: i2c-bus@1 {
+            reg = <1>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@60 {
+                compatible = "ovti,ov7251";
+                reg = <0x60>;
+
+                enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam3_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                clock-names = "xclk";
+                clock-frequency = <24000000>;
+
+                vdddo-supply = <&vreg_lvs1a_1p8>;
+                vdda-supply = <&cam3_avdd_2v8>;
+
+                port {
+                    ov7251_ep: endpoint {
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&csiphy3_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 000000000000..0e7ed00562e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: qcom,geni-i2c
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@88000 {
+        compatible = "qcom,geni-i2c";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_i2c0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "qup-core", "qup-config", "qup-memory";
+        power-domains = <&rpmhpd SC7180_CX>;
+        required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
deleted file mode 100644
index dc71754a56af..000000000000
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Qualcomm Universal Peripheral (QUP) I2C controller
-
-Required properties:
- - compatible: Should be:
-   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
-   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
-   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
- - reg: Should contain QUP register address and length.
- - interrupts: Should contain I2C interrupt.
-
- - clocks: A list of phandles + clock-specifiers, one for each entry in
-   clock-names.
- - clock-names: Should contain:
-   * "core" for the core clock
-   * "iface" for the AHB clock
-
- - #address-cells: Should be <1> Address cells for i2c device address
- - #size-cells: Should be <0> as i2c addresses have no size component
-
-Optional properties:
- - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
-                    defaults to 100kHz if omitted.
-
-Child nodes should conform to i2c bus binding.
-
-Example:
-
- i2c@f9924000 {
- 	compatible = "qcom,i2c-qup-v2.2.1";
- 	reg = <0xf9924000 0x1000>;
- 	interrupts = <0 96 0>;
-
- 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- 	clock-names = "core", "iface";
-
- 	clock-frequency = <355000>;
-
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
new file mode 100644
index 000000000000..f43947514d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) I2C controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,i2c-qup-v1.1.1     # for 8660, 8960 and 8064
+      - qcom,i2c-qup-v2.1.1     # for 8974 v1
+      - qcom,i2c-qup-v2.2.1     # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@c175000 {
+        compatible = "qcom,i2c-qup-v2.2.1";
+        reg = <0x0c175000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_i2c1_default>;
+        pinctrl-1 = <&blsp1_i2c1_sleep>;
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index 052aad44e781..c4ace5585e1e 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -46,9 +46,15 @@ properties:
               - renesas,i2c-r8a77980     # R-Car V3H
               - renesas,i2c-r8a77990     # R-Car E3
               - renesas,i2c-r8a77995     # R-Car D3
-              - renesas,i2c-r8a779a0     # R-Car V3U
           - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,i2c-r8a779a0     # R-Car V3U
+              - renesas,i2c-r8a779f0     # R-Car S4-8
+              - renesas,i2c-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-i2c # R-Car Gen4
+
   reg:
     maxItems: 1
 
@@ -132,6 +138,7 @@ allOf:
             enum:
               - renesas,rcar-gen2-i2c
               - renesas,rcar-gen3-i2c
+              - renesas,rcar-gen4-i2c
     then:
       required:
         - resets
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index 402fd125e010..d3c0d5c427ac 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -19,7 +19,9 @@ properties:
       - enum:
           - renesas,riic-r7s72100   # RZ/A1H
           - renesas,riic-r7s9210    # RZ/A2M
+          - renesas,riic-r9a07g043  # RZ/G2UL
           - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+          - renesas,riic-r9a07g054  # RZ/V2L
       - const: renesas,riic-rz      # RZ/A or RZ/G2L
 
   reg:
@@ -58,6 +60,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -74,7 +79,9 @@ if:
     compatible:
       contains:
         enum:
+          - renesas,riic-r9a07g043
           - renesas,riic-r9a07g044
+          - renesas,riic-r9a07g054
 then:
   required:
     - resets
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
new file mode 100644
index 000000000000..c46378efc123
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M I2C Bus Interface
+
+maintainers:
+  - Phil Edworthy <phil.edworthy@renesas.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,i2c-r9a09g011  # RZ/V2M
+      - const: renesas,rzv2m-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Data transmission/reception interrupt
+      - description: Status interrupt
+
+  interrupt-names:
+    items:
+      - const: tia
+      - const: tis
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+    description:
+      Desired I2C bus clock frequency in Hz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@a4030000 {
+        compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+        reg = <0xa4030000 0x80>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "tia", "tis";
+        clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+        resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+        power-domains = <&cpg>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
new file mode 100644
index 000000000000..3d5782deb97d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC I2C Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-i2c
+      - samsung,s3c2440-i2c
+        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+      - samsung,s3c2440-hdmiphy-i2c
+        # For s3c2440-like I2C used as a host to SATA PHY controller on an
+        # internal bus:
+      - samsung,exynos5-sata-phy-i2c
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: i2c
+
+  gpios:
+    description: |
+      The order of the GPIOs should be the following:: <SDA, SCL>.  The GPIO
+      specifier depends on the gpio controller. Required in all cases except
+      for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
+      permanently wired to the respective client.
+      This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
+    deprecated: yes
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,i2c-max-bus-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Desired frequency in Hz of the bus.
+    default: 100000
+
+  samsung,i2c-sda-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay (in ns) applied to data line (SDA) edges.
+    default: 0
+
+  samsung,i2c-slave-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slave address in multi-master environment.
+    default: 0
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Pandle to syscon used to control the system registers.
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2440-hdmiphy-i2c
+              - samsung,exynos5-sata-phy-i2c
+    then:
+      properties:
+        gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-i2c
+              - samsung,s3c2440-i2c
+              - samsung,s3c2440-hdmiphy-i2c
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@12c60000 {
+        compatible = "samsung,s3c2440-i2c";
+        reg = <0x12C60000 0x100>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C0>;
+        clock-names = "i2c";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_bus>;
+
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <20000>;
+        samsung,i2c-slave-addr = <0x66>;
+
+        eeprom@50 {
+            compatible = "samsung,s524ad0xd1", "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
+
+    i2c@12ce0000 {
+        compatible = "samsung,s3c2440-hdmiphy-i2c";
+        reg = <0x12CE0000 0x1000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C_HDMI>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <66000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos4212-hdmiphy";
+            reg = <0x38>;
+        };
+    };
+
+    i2c@121d0000 {
+        compatible = "samsung,exynos5-sata-phy-i2c";
+        reg = <0x121D0000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_SATA_PHYI2C>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <40000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos-sataphy-i2c";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
new file mode 100644
index 000000000000..42c5974ec7b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik I2C Bindings
+
+description: The Nomadik I2C host controller began its life in the ST
+  Microelectronics STn8800 SoC, and was then inherited into STn8810 and
+  STn8815. It was part of the prototype STn8500 which then became ST-Ericsson
+  DB8500 after the merge of these two companies wireless divisions.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,nomadik-i2c
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # The variant found in STn8815
+      - items:
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+      # The variant found in DB8500
+      - items:
+          - const: stericsson,db8500-i2c
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      # Clock name in STn8815
+      - items:
+          - const: mclk
+          - const: apb_pclk
+      # Clock name in DB8500
+      - items:
+          - const: i2cclk
+          - const: apb_pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+    #include <dt-bindings/arm/ux500_pm_domains.h>
+    i2c@80004000 {
+      compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+      reg = <0x80004000 0x1000>;
+      interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-frequency = <400000>;
+      clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+      clock-names = "i2cclk", "apb_pclk";
+      power-domains = <&pm_domains DOMAIN_VAPE>;
+      resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+    };
+
+    i2c@101f8000 {
+      compatible = "st,nomadik-i2c", "arm,primecell";
+      reg = <0x101f8000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <20>;
+      clock-frequency = <100000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c0clk>, <&pclki2c0>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index c07289a643d8..bf396e9466aa 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -17,6 +17,7 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp13-i2c
               - st,stm32mp15-i2c
     then:
       properties:
@@ -25,16 +26,9 @@ allOf:
 
         i2c-scl-falling-time-ns:
           default: 10
-
-        st,syscfg-fmp:
-          description: Use to set Fast Mode Plus bit within SYSCFG when
-                       Fast Mode Plus speed is selected by slave.
-                       Format is phandle to syscfg / register offset within
-                       syscfg / register bitmask for FMP bit.
-          $ref: "/schemas/types.yaml#/definitions/phandle-array"
-          items:
-            minItems: 3
-            maxItems: 3
+    else:
+      properties:
+        st,syscfg-fmp: false
 
   - if:
       properties:
@@ -52,6 +46,7 @@ properties:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp13-i2c
       - st,stm32mp15-i2c
 
   reg:
@@ -62,6 +57,11 @@ properties:
       - description: interrupt ID for I2C event
       - description: interrupt ID for I2C error
 
+  interrupt-names:
+    items:
+      - const: event
+      - const: error
+
   resets:
     maxItems: 1
 
@@ -87,6 +87,18 @@ properties:
     minimum: 1
     maximum: 1000000
 
+  st,syscfg-fmp:
+    description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+      Plus speed is selected by slave.
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for FMP bit
+
+  wakeup-source: true
+
 required:
   - compatible
   - reg
@@ -112,6 +124,9 @@ examples:
           clocks = <&rcc 0 149>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
       i2c@40005800 {
           compatible = "st,stm32f7-i2c";
@@ -124,6 +139,9 @@ examples:
           clocks = <&rcc 1 CLK_I2C1>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
@@ -141,4 +159,3 @@ examples:
           i2c-scl-falling-time-ns = <20>;
           st,syscfg-fmp = <&syscfg 0x4 0x2>;
       };
-...
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 715dcfa5a922..8d241a703d85 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Xilinx IIC controller Device Tree Bindings
+title: Xilinx IIC controller
 
 maintainers:
   - info@mocean-labs.com
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
deleted file mode 100644
index 3716589d6999..000000000000
--- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Bindings for cadence I3C master block
-=====================================
-
-Required properties:
---------------------
-- compatible: shall be "cdns,i3c-master"
-- clocks: shall reference the pclk and sysclk
-- clock-names: shall contain "pclk" and "sysclk"
-- interrupts: the interrupt line connected to this I3C master
-- reg: I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- #address-cells: shall be set to 1
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
-
-Example:
-
-	i3c-master@0d040000 {
-		compatible = "cdns,i3c-master";
-		clocks = <&coreclock>, <&i3csysclock>;
-		clock-names = "pclk", "sysclk";
-		interrupts = <3 0>;
-		reg = <0x0d040000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-scl-hz = <100000>;
-
-		nunchuk: nunchuk@52 {
-			compatible = "nintendo,nunchuk";
-			reg = <0x52 0x0 0x10>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
new file mode 100644
index 000000000000..cc40d25358ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I3C master block
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: cdns,i3c-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sysclk
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
index 04da001fc6ec..c002afdbfc7c 100644
--- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: MIPI I3C HCI Device Tree Bindings
+title: MIPI I3C HCI
 
 maintainers:
   - Nicolas Pitre <npitre@baylibre.com>
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
deleted file mode 100644
index 07f35f36085d..000000000000
--- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for Synopsys DesignWare I3C master block
-=================================================
-
-Required properties:
---------------------
-- compatible: shall be "snps,dw-i3c-master-1.00a"
-- clocks: shall reference the core_clk
-- interrupts: the interrupt line connected to this I3C master
-- reg: Offset and length of I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- #address-cells: shall be set to 3
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
-
-Example:
-
-	i3c-master@2000 {
-		compatible = "snps,dw-i3c-master-1.00a";
-		#address-cells = <3>;
-		#size-cells = <0>;
-		reg = <0x02000 0x1000>;
-		interrupts = <0>;
-		clocks = <&i3cclk>;
-
-		eeprom@57{
-			compatible = "atmel,24c01";
-			reg = <0x57 0x0 0x10>;
-			pagesize = <0x8>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
new file mode 100644
index 000000000000..7a76fd32962a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare I3C master block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-i3c-master-1.00a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@2000 {
+        compatible = "snps,dw-i3c-master-1.00a";
+        #address-cells = <3>;
+        #size-cells = <0>;
+        reg = <0x02000 0x1000>;
+        interrupts = <0>;
+        clocks = <&i3cclk>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..7332442e5661 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,15 +27,16 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 4fcbfd93e218..f6f97164c2ca 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADIS16240 Programmable Impact Sensor and Recorder driver
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   ADIS16240 Programmable Impact Sensor and Recorder driver that supports
@@ -25,14 +25,15 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index d6afc1b8c272..185b68ffb536 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -4,28 +4,30 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL313 3-Axis Digital Accelerometer
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
 
 maintainers:
   - Lucas Stankus <lucas.p.stankus@gmail.com>
 
 description: |
-  Analog Devices ADXL313 3-Axis Digital Accelerometer that supports
-  both I2C & SPI interfaces.
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
     https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
 
 properties:
   compatible:
     enum:
+      - adi,adxl312
       - adi,adxl313
+      - adi,adxl314
 
   reg:
     maxItems: 1
 
   spi-3wire: true
 
-  spi-max-frequency: true
-
   vs-supply:
     description: Regulator that supplies power to the accelerometer
 
@@ -48,7 +50,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 11d32a288535..346abfb13a3a 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -42,7 +40,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -55,7 +56,7 @@ examples:
         /* Example for a I2C device node */
         accelerometer@2a {
             compatible = "adi,adxl345";
-            reg = <0x53>;
+            reg = <0x2a>;
             interrupt-parent = <&gpio0>;
             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
         };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index ba54d6998f2e..14b487088ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -45,13 +45,14 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
new file mode 100644
index 000000000000..f10d98d34cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..73a5c8f814cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,14 +25,15 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..5dd06f5905b4 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -20,8 +20,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
   vddd-supply: true
   vddio-supply: true
@@ -30,7 +28,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..457a709b583c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 911a1ae9c83f..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -17,13 +17,13 @@ description: |
 properties:
   compatible:
     enum:
+      - bosch,bmi085-accel
       - bosch,bmi088-accel
+      - bosch,bmi090l-accel
 
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
   vddio-supply: true
@@ -48,7 +48,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 7c8f8bdc2333..c8659c5eba2a 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale MMA7455 and MMA7456 three axis accelerometers
 
 maintainers:
-  - Joachim Eastwood <manabian@gmail.com>
   - Jonathan Cameron <jic23@kernel.org>
 
 description:
@@ -40,13 +39,14 @@ properties:
         - "INT1"
         - "INT2"
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..f64d99b35492 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 000000000000..23528dcaa073
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index 55fd3548e3b6..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - murata,sca3300
+      - murata,scl3300
 
   reg:
     maxItems: 1
@@ -28,7 +29,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..65ce8ea14b52 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -27,8 +27,6 @@ properties:
   vdd-supply:
     description: phandle to the regulator that provides power to the accelerometer
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -44,7 +42,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index 31ffa275f5fa..b97559f23b3a 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7091R5 4-Channel 12-Bit ADC
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..75a7184a4735 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,8 +52,6 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
@@ -106,7 +104,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..cc347dade4ef 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   clocks:
     maxItems: 1
     description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
new file mode 100644
index 000000000000..dfb8f305e2f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
index 930f9e3904d7..0b2f5dc80600 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -44,4 +44,3 @@ examples:
       };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..1bfbeed6f299 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -65,7 +63,10 @@ patternProperties:
 
     additionalProperties: true
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -24,13 +24,15 @@ properties:
 
   vref-supply: true
   vdd-supply: true
-  spi-max-frequency: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index cf711082ad7d..44c671eeda73 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -66,8 +66,6 @@ properties:
       to the other supplies. Needed to be able to establish channel scaling
       unless there is also an internal reference available (e.g. ad7091r)
 
-  spi-max-frequency: true
-
   adi,conversion-start-gpios:
     description: A GPIO used to trigger the start of a conversion
     maxItems: 1
@@ -76,9 +74,9 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
   # Devices where reference is vcc
   - if:
       properties:
@@ -98,6 +96,7 @@ allOf:
               - ti,adc121s
               - ti,ads7866
               - ti,ads7868
+    then:
       required:
         - vcc-supply
   # Devices with a vref
@@ -157,6 +156,8 @@ allOf:
       properties:
         adi,conversion-start-gpios: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 73775174cf57..ac5a47c8f070 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7606 Simultaneous Sampling ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
-  - Stefan Popa <stefan.popa@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7606 Simultaneous Sampling ADC
@@ -33,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   avcc-supply: true
 
   interrupts:
@@ -106,7 +103,10 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..3ce59d4d065f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -50,8 +50,6 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpol: true
 
   spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
       - reg
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..07f9d1c09c7d 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Patrick Vasseur <patrick.vasseur@c-s.fr>
 
 description: |
   Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
@@ -37,19 +36,24 @@ properties:
     description: |
       The regulator supply for ADC reference voltage.
 
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
   '#address-cells':
     const: 1
 
   '#size-cells':
     const: 0
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 0b10ed5f74ae..9ee4d977c5ed 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -49,8 +49,6 @@ properties:
     default: 4096000
 
 
-  spi-max-frequency: true
-
   '#io-channel-cells':
     const: 1
 
@@ -64,7 +62,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index b5aed40d8a50..2d72ff6bcbc0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AD9467 and similar High-Speed ADCs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
   The AD9467 and the parts similar with it, are high-speed analog-to-digital
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 0924b2b4972b..8e25773d69be 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AXI ADC IP core
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
   Analog Devices Generic AXI ADC IP core for interfacing an ADC device
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
index efed361215b4..31f840d59303 100644
--- a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 maintainers:
-  - Ludovic Desroches <ludovic.desroches@atmel.com>
   - Eugen Hristev <eugen.hristev@microchip.com>
 
 properties:
@@ -72,7 +71,6 @@ required:
   - atmel,min-sample-rate-hz
   - atmel,max-sample-rate-hz
   - atmel,startup-time-ms
-  - atmel,trigger-edge-type
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
index 1ca571056ea9..c770ff4998f5 100644
--- a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -7,14 +7,21 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADC found on Freescale vf610 and similar SoCs
 
 maintainers:
-  - Fugang Duan <fugang.duan@nxp.com>
+  - Haibo Chen <haibo.chen@nxp.com>
 
 description:
   ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
 
 properties:
   compatible:
-    const: fsl,vf610-adc
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sx-adc
+              - fsl,imx6ul-adc
+          - const: fsl,vf610-adc
+      - items:
+          - const: fsl,vf610-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -24,8 +24,6 @@ properties:
       GPIO used for controlling the reset pin
     maxItems: 1
 
-  spi-max-frequency: true
-
   "#io-channel-cells":
     const: 1
 
@@ -33,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -22,15 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency:
-    description: maximal spi bus frequency supported
-
 required:
   - compatible
   - vref-supply
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index c1772b568cd1..875f394576c2 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -13,10 +13,14 @@ description: |
   16bit ADC supporting up to 16 single ended or 8 differential inputs.
   I2C interface.
 
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
 properties:
   compatible:
-    const:
-      lltc,ltc2497
+    enum:
+      - lltc,ltc2497
+      - lltc,ltc2499
 
   reg: true
   vref-supply: true
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..d0a7ed26d9ea 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -45,7 +45,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -26,13 +26,16 @@ properties:
     minimum: 100000
     maximum: 4800000
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -28,23 +28,25 @@ properties:
   vref-supply:
     description: External reference, needed to establish input scaling
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: maxim,max1118
-then:
-  required:
-    - vref-supply
-else:
-  properties:
-    vref-supply: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 000000000000..5f9e043cf5cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..58b12fe8070c 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,15 +39,16 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index b939f9652e3a..7f79a06e76f5 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -34,6 +34,8 @@ properties:
       - items:
           - enum:
               - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
+              - mediatek,mt8188-auxadc
               - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
           - const: mediatek,mt8173-auxadc
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index cbbac4ce56d6..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Oskar Andero <oskar.andero@gmail.com>
 
 description: |
-   Family of simple ADCs with an I2C inteface.
+   Family of simple ADCs with a SPI interface.
 
 properties:
   compatible:
@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -51,7 +50,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..2c93fb41f172 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -36,6 +36,13 @@ properties:
     description: IRQ line of the ADC
     maxItems: 1
 
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -51,7 +58,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
index 001cf263b7d5..fede2aa64092 100644
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -10,11 +10,14 @@ maintainers:
   - Tomer Maimon <tmaimon77@gmail.com>
 
 description:
-  The NPCM ADC is a 10-bit converter for eight channel inputs.
+  The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter,
+  both have eight channel inputs.
 
 properties:
   compatible:
-    const: nuvoton,npcm750-adc
+    enum:
+      - nuvoton,npcm750-adc
+      - nuvoton,npcm845-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
index 6404fb73f8ed..43abb300fa3d 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP LPC1850 ADC bindings
 
 maintainers:
-  - Joachim Eastwood <manabian@gmail.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description:
   Supports the ADC found on the LPC1850 SoC.
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 27e3108661c0..2a94db688830 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -51,7 +51,7 @@ examples:
         #size-cells = <0>;
         pmic_iadc: adc@3600 {
             compatible = "qcom,spmi-iadc";
-            reg = <0x3600 0x100>;
+            reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
             #io-channel-cells  = <1>;
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
new file mode 100644
index 000000000000..c8cbfd3444be
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-rradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC Round Robin ADC
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+description: |
+  The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to
+  read the voltage, current and temperature for supported peripherals such as
+  the battery thermistor die temperature, charger temperature, USB and DC input
+  voltage / current and battery ID resistor.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-rradc
+      - qcom,pm660-rradc
+
+  reg:
+    maxItems: 1
+
+  qcom,batt-id-delay-ms:
+    description: Sets the hardware settling time for the battery ID resistor.
+    enum: [0, 1, 4, 12, 20, 40, 60, 80]
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic_rradc: adc@4500 {
+          compatible = "qcom,pmi8998-rradc";
+          reg = <0x4500>;
+          #io-channel-cells  = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 74a4a9d95798..8bac0c4120dd 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -58,6 +58,7 @@ required:
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: |
       Represents the external channels which are connected to the ADC.
       For compatible property "qcom,spmi-vadc" following channels, also known as
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
index c80201d6a716..61c6157cf5a9 100644
--- a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
@@ -19,7 +19,9 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g044-adc   # RZ/G2{L,LC}
+          - renesas,r9a07g043-adc   # RZ/G2UL
+          - renesas,r9a07g044-adc   # RZ/G2L
+          - renesas,r9a07g054-adc   # RZ/V2L
       - const: renesas,rzg2l-adc
 
   reg:
@@ -75,16 +77,35 @@ patternProperties:
     properties:
       reg:
         description: |
-          The channel number. It can have up to 8 channels numbered from 0 to 7.
-        items:
-          - minimum: 0
-            maximum: 7
+          The channel number.
 
     required:
       - reg
 
     additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-adc
+    then:
+      patternProperties:
+        "^channel@[2-7]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 7
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 000000000000..88e008629ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+  interface, and the device provides full information for system by reading
+  out the loading current and power.
+
+  The device monitors both of the drops across sense resistor and the BUS
+  voltage, converts into the current in amperes, and power in watts through
+  internal analog-to-digital converter ADC. The programmable calibration,
+  adjustable conversion time, and averaging function are also built in for
+  more design flexibility.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+  compatible:
+    const: richtek,rtq6056
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt IN+/IN- sensing node resistor
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@40 {
+        compatible = "richtek,rtq6056";
+        reg = <0x40>;
+        #io-channel-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
index caa3ee0b4b8c..44aa28b59197 100644
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -20,6 +20,7 @@ properties:
       - sprd,sc2723-adc
       - sprd,sc2730-adc
       - sprd,sc2731-adc
+      - sprd,ump9620-adc
 
   reg:
     maxItems: 1
@@ -33,13 +34,39 @@ properties:
   hwlocks:
     maxItems: 1
 
-  nvmem-cells:
-    maxItems: 2
+  nvmem-cells: true
 
-  nvmem-cell-names:
-    items:
-      - const: big_scale_calib
-      - const: small_scale_calib
+  nvmem-cell-names: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - sprd,ump9620-adc
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 2
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib
+            - const: small_scale_calib
+
+    else:
+      properties:
+        nvmem-cells:
+          maxItems: 6
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib1
+            - const: big_scale_calib2
+            - const: small_scale_calib1
+            - const: small_scale_calib2
+            - const: vbat_det_cal1
+            - const: vbat_det_cal2
 
 required:
   - compatible
@@ -69,4 +96,25 @@ examples:
             nvmem-cell-names = "big_scale_calib", "small_scale_calib";
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@504 {
+            compatible = "sprd,ump9620-adc";
+            reg = <0x504>;
+            interrupt-parent = <&ump9620_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_bcal1>, <&adc_bcal2>,
+                          <&adc_scal1>, <&adc_scal2>,
+                          <&vbat_det_cal1>, <&vbat_det_cal2>;
+            nvmem-cell-names = "big_scale_calib1", "big_scale_calib2",
+                               "small_scale_calib1", "small_scale_calib2",
+                               "vbat_det_cal1", "vbat_det_cal2";
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 4d6074518b5c..fa8da42cb1e6 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -138,7 +138,6 @@ allOf:
             - const: bus
             - const: adc
           minItems: 1
-          maxItems: 2
 
         interrupts:
           items:
@@ -170,7 +169,6 @@ allOf:
             - const: bus
             - const: adc
           minItems: 1
-          maxItems: 2
 
         interrupts:
           items:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 7c260f209687..1970503389aa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -72,6 +72,7 @@ additionalProperties: false
 patternProperties:
   "^filter@[0-9]+$":
     type: object
+    unevaluatedProperties: false
     description: child node
 
     properties:
@@ -108,9 +109,7 @@ patternProperties:
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
         $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 5
+        maximum: 5
 
       "#io-channel-cells":
         const: 1
@@ -174,7 +173,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-adc
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               minItems: 1
@@ -206,7 +205,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-dmic
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               maxItems: 1
@@ -227,6 +226,7 @@ patternProperties:
           patternProperties:
             "^dfsdm-dai+$":
               type: object
+              additionalProperties: false
               description: child node
 
               properties:
@@ -254,7 +254,7 @@ allOf:
           contains:
             const: st,stm32h7-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
@@ -269,7 +269,7 @@ allOf:
           contains:
             const: st,stm32mp1-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 9049c699152f..333744a2159c 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -13,8 +13,7 @@ description:
   This ADC forms part of an ST microelectronics STMPE multifunction device .
   The ADC is shared with the STMPE touchscreen. As a result some ADC related
   settings are specified in the parent node.
-  The node name myst be stmpe_adc and should be a child node of the stmpe node
-  to which it belongs.
+  The node should be a child node of the stmpe node to which it belongs.
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -24,8 +24,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index 54955f03df93..9b072b057f16 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADC108S102 and ADC128S102
 
 maintainers:
-  - Bogdan Pricop <bogdan.pricop@emutex.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
@@ -19,7 +19,6 @@ properties:
 
   reg: true
   vref-supply: true
-  spi-max-frequency: true
   "#io-channel-cells":
     const: 1
 
@@ -28,7 +27,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -31,8 +31,6 @@ properties:
     maxItems: 1
     description: Conversion clock input.
 
-  spi-max-frequency: true
-
   vref-p-supply:
     description: The regulator supply for positive analog voltage reference
 
@@ -62,7 +60,10 @@ required:
   - clocks
   - vref-p-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..775eee972b12 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -27,8 +27,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -39,7 +37,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
 
   "#io-channel-cells":
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2c2d01bbc296..2c3c2cf2145c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI ADS1015 4 channel I2C analog to digital converter
+title: TI ADS1015/ADS1115 4 channel I2C analog to digital converter
 
 maintainers:
   - Daniel Baluta <daniel.baluta@nxp.com>
@@ -15,7 +15,10 @@ description: |
 
 properties:
   compatible:
-    const: ti,ads1015
+    enum:
+      - ti,ads1015
+      - ti,ads1115
+      - ti,tla2024
 
   reg:
     maxItems: 1
@@ -40,6 +43,7 @@ additionalProperties: false
 patternProperties:
   "^channel@[0-7]+$":
     type: object
+    additionalProperties: false
     description:
       Child nodes needed for each channel that the platform uses.
 
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 9f5e96439c01..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments' ads124s08 and ads124s06 ADC chip
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 properties:
   compatible:
@@ -18,8 +18,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   reset-gpios:
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..55c2c73626f4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   The ADS131E0x are a family of multichannel, simultaneous sampling,
@@ -28,8 +28,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   clocks:
@@ -120,7 +118,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: Supply the 2.5V or 5V reference voltage
 
@@ -32,7 +30,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,13 +25,14 @@ properties:
     description: Optional external reference.  If not supplied, assume
       REFSEL input tied low to enable the internal reference.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
index d6f21d5cccd7..b32be24a9f98 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -11,9 +11,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - ti,am3359-adc
-      - ti,am4372-adc
+    oneOf:
+      - enum:
+          - ti,am3359-adc
+          - ti,am4372-adc
+      - items:
+          - enum:
+              - ti,am654-adc
+          - const: ti,am3359-adc
 
   '#io-channel-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
index 7b895784e008..57a31356082e 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -74,9 +74,9 @@ examples:
         compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
         adc {
             compatible = "ti,palmas-gpadc";
-            interrupts = <18 0
-                          16 0
-                          17 0>;
+            interrupts = <18 0>,
+                         <16 0>,
+                         <17 0>;
             #io-channel-cells = <1>;
             ti,channel0-current-microamp = <5>;
             ti,channel3-current-microamp = <10>;
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -33,7 +31,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..bdf3bba2d750 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -23,7 +23,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
+  vref-supply:
+    description: Optional supply of the reference voltage
 
   "#io-channel-cells":
     const: 1
@@ -59,7 +60,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
index e759a5da708d..d6d3d8590171 100644
--- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -27,6 +27,7 @@ description: |
    8 | batt_v
    9 | batt_chrg_i
   10 | batt_dischrg_i
+  11 | ts_v
 
   AXP22x
   ------
@@ -34,6 +35,7 @@ description: |
    1 | batt_v
    2 | batt_chrg_i
    3 | batt_dischrg_i
+   4 | ts_v
 
   AXP813
   ------
@@ -42,6 +44,7 @@ description: |
    2 | batt_v
    3 | batt_chrg_i
    4 | batt_dischrg_i
+   5 | ts_v
 
 
 properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..be93c109d6ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurment.           |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AMS reference clock
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    additionalProperties: false
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 000000000000..03bb90a7f4f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+      status = "okay";
+
+      ad74413r@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
new file mode 100644
index 000000000000..336ce96371db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sense RTD
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
+  used to get a linear voltage to temperature reading within a give range
+  (usually 0 to 100 degrees Celsius).
+
+  When an io-channel measures the output voltage across an RTD such as a
+  PT1000, the interesting measurement is almost always the corresponding
+  temperature, not the voltage output. This binding describes such a circuit.
+
+  The general transfer function here is (using SI units)
+
+    V = R(T) * iexc
+    R(T) = r0 * (1 + alpha * T)
+    T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
+
+  The following circuit matches what's in the examples section.
+
+           5V0
+          -----
+            |
+        +---+----+
+        |  R 5k  |
+        +---+----+
+            |
+            V 1mA
+            |
+            +---- Vout
+            |
+        +---+----+
+        | PT1000 |
+        +---+----+
+            |
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-sense-rtd
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  excitation-current-microamp:
+    description: The current fed through the RTD sensor.
+
+  alpha-ppm-per-celsius:
+    description: |
+      alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
+      approximation of the resistance versus temperature relationship
+      between 0 and 100 degrees Celsius.
+
+      alpha = (R_100 - R_0) / (100 * R_0)
+
+      Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
+      R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
+      Celsius.
+
+      Pure platinum has an alpha of 3925. Industry standards such as IEC60751
+      and ASTM E-1137 specify an alpha of 3850.
+
+  r-naught-ohms:
+    description: |
+      Resistance of the sensor at 0 degrees Celsius.
+      Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
+
+additionalProperties: false
+required:
+  - compatible
+  - io-channels
+  - excitation-current-microamp
+  - alpha-ppm-per-celsius
+  - r-naught-ohms
+
+examples:
+  - |
+    pt1000_1: temperature-sensor0 {
+        compatible = "temperature-sense-rtd";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc1 0>;
+
+        excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
+        alpha-ppm-per-celsius = <3908>;
+        r-naught-ohms = <1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
new file mode 100644
index 000000000000..cfbf5350db27
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Transducer
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  A temperature transducer is a device that converts a thermal quantity
+  into any other physical quantity. This binding applies to temperature to
+  voltage (like the LTC2997), and temperature to current (like the AD590)
+  linear transducers.
+  In both cases these are assumed to be connected to a voltage ADC.
+
+  When an io-channel measures the output voltage of a temperature analog front
+  end such as a temperature transducer, the interesting measurement is almost
+  always the corresponding temperature, not the voltage output. This binding
+  describes such a circuit.
+
+  The general transfer function here is (using SI units)
+    V(T) = Rsense * Isense(T)
+    T = (Isense(T) / alpha) + offset
+    T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha)
+
+  When using a temperature to voltage transducer, Rsense is set to 1.
+
+  The following circuits show a temperature to current and a temperature to
+  voltage transducer that can be used with this binding.
+
+           VCC
+          -----
+            |
+        +---+---+
+        | AD590 |                               VCC
+        +---+---+                              -----
+            |                                    |
+            V proportional to T             +----+----+
+            |                          D+ --+         |
+            +---- Vout                      | LTC2997 +--- Vout
+            |                          D- --+         |
+        +---+----+                          +---------+
+        | Rsense |                               |
+        +---+----+                             -----
+            |                                   GND
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-transducer
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  sense-offset-millicelsius:
+    description: |
+      Temperature offset.
+      This offset is commonly used to convert from Kelvins to degrees Celsius.
+      In that case, sense-offset-millicelsius would be set to <(-273150)>.
+    default: 0
+
+  sense-resistor-ohms:
+    description: |
+      The sense resistor.
+      By default sense-resistor-ohms cancels out the resistor making the
+      circuit behave like a temperature transducer.
+    default: 1
+
+  alpha-ppm-per-celsius:
+    description: |
+      Sometimes referred to as output gain, slope, or temperature coefficient.
+
+      alpha is expressed in parts per million which can be micro-amps per
+      degrees Celsius or micro-volts per degrees Celsius. The is the main
+      characteristic of a temperature transducer and should be stated in the
+      datasheet.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - alpha-ppm-per-celsius
+
+examples:
+  - |
+    ad950: temperature-sensor-0 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 3>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        sense-resistor-ohms = <8060>;
+        alpha-ppm-per-celsius = <1>; /* 1 uA/K */
+    };
+  - |
+    znq_tmp: temperature-sensor-1 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 2>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
new file mode 100644
index 000000000000..c15da155d300
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ada4250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADA4250 Programmable Gain Instrumentation Amplifier
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
+
+properties:
+  compatible:
+    enum:
+      - adi,ada4250
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+
+  adi,refbuf-enable:
+    description:
+      Enable internal buffer to drive the reference pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      amplifier@0 {
+        compatible = "adi,ada4250";
+        reg = <0>;
+        avdd-supply = <&avdd>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index a557761d8016..9fda56fa49c3 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -8,7 +8,6 @@ title: HMC425A 6-bit Digital Step Attenuator
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Digital Step Attenuator IIO device with gpio interface.
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 000000000000..fee0f023a8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3542r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        additionalProperties: false
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p-inv-log2:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n-inv-log2:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p-inv-log2
+          - adi,gain-scaling-n-inv-log2
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad3552r@0 {
+              compatible = "adi,ad3552r";
+              reg = <0>;
+              spi-max-frequency = <20000000>;
+              #address-cells = <1>;
+              #size-cells = <0>;
+              channel@0 {
+                      reg = <0>;
+                      adi,output-range-microvolt = <0 10000000>;
+              };
+              channel@1 {
+                      reg = <1>;
+                      custom-output-range-config {
+                              adi,gain-offset = <5>;
+                              adi,gain-scaling-p-inv-log2 = <1>;
+                              adi,gain-scaling-n-inv-log2 = <2>;
+                              adi,rfb-ohms = <1>;
+                      };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
index 05ed4e0ec364..c04165fa9259 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -95,15 +95,12 @@ properties:
   vrefD-supply: true
   vref-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - # Shared external vref, no internal reference
     if:
       properties:
@@ -232,6 +229,8 @@ allOf:
         - vrefA-supply
         - vrefB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
index 0d8fb56f4b09..86e2884cdfb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -28,10 +28,6 @@ properties:
   vref1-supply: true
   vref2-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -39,6 +35,7 @@ required:
   - vref1-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -59,9 +56,11 @@ allOf:
           contains:
             enum:
               - adi,ad5371
-      then:
-        required:
-          - vref2-supply
+    then:
+      required:
+        - vref2-supply
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index d599b418a020..ff50c72c62b5 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -39,14 +39,15 @@ properties:
     description:
       If not supplied devices will use internal regulators.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
index 188f656617e3..52d089ebde95 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -26,13 +26,14 @@ properties:
     maxItems: 1
     description: Fault signal.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
index 044332c97743..d2af2d491986 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -27,19 +27,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   VREF-supply: true
   VREFA-supply: true
   VREFB-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -72,6 +69,8 @@ allOf:
         - VREFA-supply
         - VREFB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
index 330383b85eeb..4d5111a5f9bd 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -22,17 +22,18 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not present, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index 5c26441eae9f..13f214234b8e 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -53,14 +53,15 @@ properties:
   vcc-supply:
     description: If not supplied the internal reference is used.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
index be419ac46caa..9a3c2926bf85 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -25,8 +25,6 @@ properties:
     description: Either this or spi-cpol but not both.
   spi-cpol: true
 
-  spi-max-frequency: true
-
   adi,ext-dc-dc-compenstation-resistor:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -67,8 +65,6 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -123,9 +119,13 @@ oneOf:
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
-    #include <dt-bindings/iio/adi,ad5592r.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index fd4edca34a28..e49e7556175d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -16,7 +16,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   adi,dc-dc-mode:
@@ -99,6 +98,7 @@ required:
   - adi,dc-dc-mode
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         adi,dc-dc-mode:
@@ -115,7 +115,7 @@ allOf:
       required:
         - adi,range-microvolt
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
index 7f95a9ed55fe..df550b5af2f7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not supplied, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -45,6 +42,8 @@ allOf:
       required:
         - vref-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
index 8e893d52bfb1..0b409a727a43 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefAB-supply: true
   vrefCD-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -46,6 +43,8 @@ allOf:
         - vrefAB-supply
         - vrefCD-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index a8f7720d1e3e..29bd16dab546 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -22,6 +22,8 @@ properties:
       - adi,ad5767
 
   output-range-microvolts:
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    maxItems: 2
     description: Select converter output range.
 
   reg:
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index fb2c48fc7ce4..8e7da0de918f 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5770R DAC device driver
 
 maintainers:
-  - Mircea Caprioru <mircea.caprioru@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
@@ -49,8 +49,6 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -62,6 +60,7 @@ properties:
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -85,6 +84,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -101,6 +101,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -116,6 +117,7 @@ properties:
 patternProperties:
   "^channel@([3-5])$":
     type: object
+    additionalProperties: false
     description: Represents the external channels which are connected to the DAC.
     properties:
       reg:
@@ -138,7 +140,10 @@ required:
   - channel@4
   - channel@5
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 650d1ebdcec3..3a84739736f6 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -23,19 +23,20 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vss-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vss-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 000000000000..5ee80bf6aa11
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
index 6a3990a8d0ad..1849a2ff05c7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -19,19 +19,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefh-supply: true
   vrefl-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vrefh-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -44,6 +41,8 @@ allOf:
       properties:
         vrefl-supply: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 000000000000..15cc6bf59b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          ltc2688: ltc2688@0 {
+                  compatible = "adi,ltc2688";
+                  reg = <0>;
+
+                  vcc-supply = <&vcc>;
+                  iovcc-supply = <&vcc>;
+                  vref-supply = <&vref>;
+
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  channel@0 {
+                          reg = <0>;
+                          adi,toggle-mode;
+                          adi,overrange;
+                  };
+
+                  channel@1 {
+                          reg = <1>;
+                          adi,output-range-microvolt = <0 10000000>;
+
+                          clocks = <&clock_tgp3>;
+                          adi,toggle-dither-input = <2>;
+                  };
+          };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index e51a585bd5a3..133b0f867992 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -41,7 +41,7 @@ examples:
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
-  
+
       dac@0 {
         compatible = "lltc,ltc1660";
         reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
index edf804d0aca2..b1eb77335d05 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -68,7 +68,7 @@ examples:
       #size-cells = <0>;
 
       dac@0 {
-        compatible = "lltc,ltc2632";
+        compatible = "lltc,ltc2632-l12";
         reg = <0>;    /* CS0 */
         spi-max-frequency = <1000000>;
         vref-supply = <&vref>;
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
index 12a14b3f36cb..19374401e509 100644
--- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -15,22 +15,24 @@ properties:
     enum:
       - microchip,mcp4902
       - microchip,mcp4912
+      - microchip,mcp4921
       - microchip,mcp4922
 
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
index b0157050f1ee..201b04af2b22 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -33,21 +33,22 @@ properties:
   vref-supply:
     description: Needed to provide output scaling.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
-
 oneOf:
   - required:
       - spi-cpha
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     vref_2v5_reg: regulator-vref {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
index 714191724f7c..88298bc43b81 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -21,6 +21,7 @@ properties:
       - ti,dac5573
       - ti,dac6573
       - ti,dac7573
+      - ti,dac121c081
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
index 10be98d1f19c..a6814587dbc4 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -24,14 +24,15 @@ properties:
       Reference voltage must be supplied to establish the scaling of the
       output voltage.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index d172b142f6ed..20dd1370660d 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -29,13 +29,14 @@ properties:
       DACs are loaded when the pin connected to this GPIO is pulled low.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
new file mode 100644
index 000000000000..b77e855bd594
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/filter/adi,admv8818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV8818 Digitally Tunable, High-Pass and Low-Pass Filter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+    Fully monolithic microwave integrated circuit (MMIC) that
+    features a digitally selectable frequency of operation.
+    The device features four independently controlled high-pass
+    filters (HPFs) and four independently controlled low-pass filters
+    (LPFs) that span the 2 GHz to 18 GHz frequency range.
+
+    https://www.analog.com/en/products/admv8818.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv8818
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: rf_in
+
+  clock-output-names:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv8818@0 {
+        compatible = "adi,admv8818";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        clocks = <&admv8818_rfin>;
+        clock-names = "rf_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 6b3a611e1cf1..0144f74a4768 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,15 +40,16 @@ properties:
       output stage will shut down until the ADF4371/ADF4372 achieves lock as
       measured by the digital lock detect circuitry.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 000000000000..23f1f3b55abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1013.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1013
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  vcm-supply:
+    description:
+      Analog voltage regulator.
+
+  adi,detector-enable:
+    description:
+      Enable the Envelope Detector available at output pins VENV_P and
+      VENV_N. Disable to reduce power consumption.
+    type: boolean
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv1013@0{
+        compatible = "adi,admv1013";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1013_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
new file mode 100644
index 000000000000..2716c1e8fe31
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1014 Microwave Downconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave downconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1014.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1014
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+    description:
+      External clock that provides the Local Oscilator input.
+
+  vcm-supply:
+    description:
+      Common-mode voltage regulator.
+
+  vcc-if-bb-supply:
+    description:
+      BB and IF supply voltage regulator.
+
+  vcc-vga-supply:
+    description:
+      RF Amplifier supply voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit supply voltage regulator.
+
+  vcc-lna-3p3-supply:
+    description:
+      Low Noise Amplifier 3.3V supply voltage regulator.
+
+  vcc-lna-1p5-supply:
+    description:
+      Low Noise Amplifier 1.5V supply voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Band Gap Circuit supply voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruple supply voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer supply voltage regulator.
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,detector-enable:
+    description:
+      Digital Rx Detector Enable. The Square Law Detector output is
+      available at output pin VDET.
+    type: boolean
+
+  adi,p1db-compensation-enable:
+    description:
+      Turn on bits to optimize P1dB.
+    type: boolean
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      converter@0 {
+        compatible = "adi,admv1014";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1014_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-if-bb-supply = <&vcc_if_bb>;
+        vcc-vga-supply = <&vcc_vga>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
+        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-quad-supply = <&vcc_quad>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+        adi,p1db-compensation-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
new file mode 100644
index 000000000000..da7fe85ec92e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv4420.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV4420 K Band Downconverter
+
+maintainers:
+  - Cristian Pop <cristian.pop@analog.com>
+
+description:
+  The ADMV4420 is a highly integrated, double balanced, active
+  mixer with an integrated fractional-N synthesizer, ideally suited
+  for next generation K band satellite communications
+
+properties:
+  compatible:
+    enum:
+      - adi,admv4420
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  adi,lo-freq-khz:
+    description: LO Frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  adi,ref-ext-single-ended-en:
+    description: External reference selected.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mixer@0 {
+        compatible = "adi,admv4420";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        adi,lo-freq-khz = <16750000>;
+        adi,ref-ext-single-ended-en;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index b6bbc312a7cf..1414ba9977c1 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -24,8 +24,10 @@ properties:
 
   interrupts:
     minItems: 1
+    maxItems: 2
     description:
       Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
index 7e2accc3d5ce..d1a6103fc37a 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -61,7 +61,7 @@ examples:
                 #size-cells = <0>;
 
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index d861526c5c42..6c5ad426a016 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -25,14 +25,15 @@ properties:
 
   reset-gpios: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..d166dbca18c3 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,8 +25,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -35,7 +33,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index 5dbe24be9925..56e0dc20f5e4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADIS16480 and similar IMUs
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 properties:
   compatible:
@@ -47,8 +47,6 @@ properties:
         - DIO3
         - DIO4
 
-  spi-max-frequency: true
-
   spi-cpha: true
   spi-cpol: true
 
@@ -96,8 +94,6 @@ properties:
       - DIO3
       - DIO4
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -106,6 +102,11 @@ required:
   - spi-cpol
   - spi-max-frequency
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..a0760382548d 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,13 +46,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 000000000000..e0d06db161a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+  - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+  internal MCU for sensor fusion
+  https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bno055
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      imu {
+        compatible = "bosch,bno055";
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      imu@28 {
+        compatible = "bosch,bno055";
+        reg = <0x28>;
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..488349755c99 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -47,7 +47,6 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -56,7 +55,10 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index edbc2921aabd..ec64d7877fe5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -14,21 +14,25 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - invensense,iam20680
-      - invensense,icm20608
-      - invensense,icm20609
-      - invensense,icm20689
-      - invensense,icm20602
-      - invensense,icm20690
-      - invensense,mpu6000
-      - invensense,mpu6050
-      - invensense,mpu6500
-      - invensense,mpu6515
-      - invensense,mpu6880
-      - invensense,mpu9150
-      - invensense,mpu9250
-      - invensense,mpu9255
+    oneOf:
+      - enum:
+          - invensense,iam20680
+          - invensense,icm20608
+          - invensense,icm20609
+          - invensense,icm20689
+          - invensense,icm20602
+          - invensense,icm20690
+          - invensense,mpu6000
+          - invensense,mpu6050
+          - invensense,mpu6500
+          - invensense,mpu6515
+          - invensense,mpu6880
+          - invensense,mpu9150
+          - invensense,mpu9250
+          - invensense,mpu9255
+      - items:
+          - const: invensense,icm20608d
+          - const: invensense,icm20608
 
   reg:
     maxItems: 1
@@ -36,8 +40,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vddio-supply: true
 
@@ -50,6 +52,7 @@ properties:
       These devices also support an auxiliary i2c bus via an i2c-gate.
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       not:
         properties:
@@ -63,7 +66,7 @@ allOf:
       properties:
         i2c-gate: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -95,7 +98,7 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 479e7065d4eb..24416b59b782 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale FXOS8700 Inertial Measurement Unit
 
 maintainers:
-  - Robert Jones <rjones@gateworks.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Accelerometer and magnetometer combo device with an i2c and SPI interface.
@@ -36,13 +36,14 @@ properties:
   drive-open-drain:
     type: boolean
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index d9b3213318fb..fe1e02e5d7b3 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -14,23 +14,30 @@ description:
 
 properties:
   compatible:
-    enum:
-      - st,lsm6ds3
-      - st,lsm6ds3h
-      - st,lsm6dsl
-      - st,lsm6dsm
-      - st,ism330dlc
-      - st,lsm6dso
-      - st,asm330lhh
-      - st,lsm6dsox
-      - st,lsm6dsr
-      - st,lsm6ds3tr-c
-      - st,ism330dhcx
-      - st,lsm9ds1-imu
-      - st,lsm6ds0
-      - st,lsm6dsrx
-      - st,lsm6dst
-      - st,lsm6dsop
+    oneOf:
+      - enum:
+          - st,lsm6ds3
+          - st,lsm6ds3h
+          - st,lsm6dsl
+          - st,lsm6dsm
+          - st,ism330dlc
+          - st,lsm6dso
+          - st,asm330lhh
+          - st,lsm6dsox
+          - st,lsm6dsr
+          - st,lsm6ds3tr-c
+          - st,ism330dhcx
+          - st,lsm9ds1-imu
+          - st,lsm6ds0
+          - st,lsm6dsrx
+          - st,lsm6dst
+          - st,lsm6dsop
+      - items:
+          - const: st,asm330lhhx
+          - const: st,lsm6dsr
+      - items:
+          - const: st,lsm6dstx
+          - const: st,lsm6dst
 
   reg:
     maxItems: 1
@@ -41,8 +48,6 @@ properties:
     description:
       Supports up to 2 interrupt lines via the INT1 and INT2 pins.
 
-  spi-max-frequency: true
-
   vdd-supply:
     description: if defined provides VDD power to the sensor.
 
@@ -61,6 +66,13 @@ properties:
     type: boolean
     description: enable/disable internal i2c controller pullup resistors.
 
+  st,disable-sensor-hub:
+    type: boolean
+    description:
+      Enable/disable internal i2c controller slave autoprobing at bootstrap.
+      Disable sensor-hub is useful if i2c controller clock/data lines are
+      connected through a pull-up with other chip lines (e.g. SDO/SA0).
+
   drive-open-drain:
     type: boolean
     description:
@@ -70,12 +82,15 @@ properties:
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
index db0407bc9209..c8074f180a79 100644
--- a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -9,6 +9,9 @@ title: LiteON LTR501 I2C Proximity and Light sensor
 maintainers:
   - Nikita Travkin <nikita@trvn.ru>
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
     enum:
@@ -25,6 +28,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 additionalProperties: false
 
 required:
@@ -42,6 +47,8 @@ examples:
         light-sensor@23 {
             compatible = "liteon,ltr559";
             reg = <0x23>;
+            proximity-near-level = <75>;
+
             vdd-supply = <&pm8916_l17>;
             vddio-supply = <&pm8916_l6>;
 
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..7de1b0e721ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+  - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    const: liteon,ltrf216a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltrf216a";
+            reg = <0x53>;
+            vdd-supply = <&vdd_regulator>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index f92bf7b2b7f0..f6e22dc9814a 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -13,6 +13,9 @@ maintainers:
 description: |
   Ambient light and proximity sensor over an i2c interface.
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
     enum:
@@ -26,6 +29,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 required:
   - compatible
   - reg
@@ -44,6 +49,7 @@ examples:
         stk3310@48 {
                 compatible = "sensortek,stk3310";
                 reg = <0x48>;
+                proximity-near-level = <25>;
                 interrupt-parent = <&gpio1>;
                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
         };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
index 4b0ef1ef5445..9438fffaf0ba 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -96,7 +96,7 @@ examples:
           vdd-supply = <&ldo1_reg>;
           iovdd-supply = <&ldo2_reg>;
           reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
-          interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>;
+          interrupts = <13 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
index 567697d996ec..87e88f2a9908 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -25,14 +25,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
index 945a2d644ddc..896fe0b5edcc 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -80,14 +80,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
@@ -95,7 +96,7 @@ examples:
         #size-cells = <0>;
 
         potentiometer@0 {
-            compatible = "mcp4131-502";
+            compatible = "microchip,mcp4131-502";
             reg = <0>;
             spi-max-frequency = <500000>;
         };
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index be2be4b556db..1f9fe15b4b3c 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: All Sensors DLH series low voltage digital pressure sensors
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Bindings for the All Sensors DLH series pressure sensors.
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 49257f9251e8..72cd2c2d3f17 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
@@ -16,6 +16,7 @@ description: |
     https://www.bosch-sensortec.com/bst/products/all_products/bmp180
     https://www.bosch-sensortec.com/bst/products/all_products/bmp280
     https://www.bosch-sensortec.com/bst/products/all_products/bme280
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp380
 
 properties:
   compatible:
@@ -24,6 +25,7 @@ properties:
       - bosch,bmp180
       - bosch,bmp280
       - bosch,bme280
+      - bosch,bmp380
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
index 099b4be927d4..00e3b59641d2 100644
--- a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -10,7 +10,6 @@ title: ChromeOS EC MKBP Proximity Sensor
 maintainers:
   - Stephen Boyd <swboyd@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC sometimes has the ability to detect user proximity.
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 000000000000..b3aa2ebf9661
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9324.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of 3 entries. Index represent the id of the CS pin.
+      Value indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 1.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph2-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 2.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph3-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 3.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+
+  semtech,ph01-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 128
+
+  semtech,ph23-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 128
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,ph01-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,ph23-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      Same as proxraw-strength01, for phase 2 and 3.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,cs-idle-sleep:
+    description:
+      State of CS pins during sleep mode and idle time.
+    enum:
+      - hi-z
+      - gnd
+      - vdd
+
+  semtech,int-comp-resistor:
+    description:
+      Internal resistor setting for compensation.
+    enum:
+      - lowest
+      - low
+      - high
+      - highest
+
+  semtech,input-precharge-resistor-ohms:
+    default: 4000
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+  semtech,input-analog-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: |
+      Defines the input antenna analog gain
+      0: x1.247
+      1: x1 (default)
+      2: x0.768
+      3: x0.552
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9324";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1 2 3>;
+        semtech,ph1-pin = <3 2 1>;
+        semtech,ph2-pin = <1 2 3>;
+        semtech,ph3-pin = <3 2 1>;
+        semtech,ph01-resolution = <256>;
+        semtech,ph23-resolution = <256>;
+        semtech,startup-sensor = <1>;
+        semtech,ph01-proxraw-strength = <2>;
+        semtech,ph23-proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,int-comp-resistor = "lowest";
+        semtech,input-precharge-resistor-ohms = <2000>;
+        semtech,cs-idle-sleep = "gnd";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 000000000000..f088c5d2be99
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,input-precharge-resistor-ohms:
+    default: 0
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,input-precharge-resistor-ohms = <4000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
index 656460d9d8c8..322befc41de6 100644
--- a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -19,6 +19,11 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
index a88b3b14d6bd..dd2ae2bd1ad7 100644
--- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -40,10 +40,6 @@ properties:
     description:
       Reset the sensorhub.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -52,6 +48,11 @@ required:
   - mcu-ap-gpios
   - mcu-reset-gpios
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index 71de5631ebae..250439b13152 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -29,6 +29,7 @@ properties:
           - st,lis2dw12
           - st,lis2hh12
           - st,lis2dh12-accel
+          - st,lis302dl
           - st,lis331dl-accel
           - st,lis331dlh-accel
           - st,lis3de
@@ -46,6 +47,9 @@ properties:
           - st,lsm330d-accel
           - st,lsm330dl-accel
           - st,lsm330dlc-accel
+      - description: Silan Accelerometers
+        enum:
+          - silan,sc7a20
       - description: STMicroelectronics Gyroscopes
         enum:
           - st,l3g4200d-gyro
@@ -69,6 +73,7 @@ properties:
       - description: STMicroelectronics Pressure Sensors
         enum:
           - st,lps001wp-press
+          - st,lps22df
           - st,lps22hb-press
           - st,lps22hh
           - st,lps25h-press
@@ -137,6 +142,7 @@ allOf:
             - st,lis2mdl
             - st,lis3l02dq
             - st,lis3lv02dl-accel
+            - st,lps22df
             - st,lps22hb-press
             - st,lps22hh
             - st,lps25h-press
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 0f79d9a01c49..722781aa4697 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -448,17 +448,17 @@ examples:
                         reg = <20>;
                         adi,sensor-type = <9>; //custom thermocouple
                         adi,single-ended;
-                        adi,custom-thermocouple = /bits/ 64
-                                 <(-50220000) 0>,
-                                 <(-30200000) 99100000>,
-                                 <(-5300000) 135400000>,
-                                 <0 273150000>,
-                                 <40200000 361200000>,
-                                 <55300000 522100000>,
-                                 <88300000 720300000>,
-                                 <132200000 811200000>,
-                                 <188700000 922500000>,
-                                 <460400000 1000000000>; //10 pairs
+                        adi,custom-thermocouple =
+                                 /bits/ 64 <(-50220000) 0>,
+                                 /bits/ 64 <(-30200000) 99100000>,
+                                 /bits/ 64 <(-5300000) 135400000>,
+                                 /bits/ 64 <0 273150000>,
+                                 /bits/ 64 <40200000 361200000>,
+                                 /bits/ 64 <55300000 522100000>,
+                                 /bits/ 64 <88300000 720300000>,
+                                 /bits/ 64 <132200000 811200000>,
+                                 /bits/ 64 <188700000 922500000>,
+                                 /bits/ 64 <460400000 1000000000>; //10 pairs
                };
 
         };
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
 required:
@@ -40,6 +39,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -53,7 +53,7 @@ allOf:
       properties:
         spi-cpha: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -19,7 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   thermocouple-type:
@@ -34,7 +33,10 @@ required:
   - reg
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index aafb33b16549..a2823ed6867b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -25,7 +25,6 @@ properties:
       enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
     type: boolean
 
-  spi-max-frequency: true
   spi-cpha: true
 
 required:
@@ -33,7 +32,10 @@ required:
   - reg
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
index b547ddcd544a..4a55e7f25ae7 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -35,6 +35,9 @@ properties:
     maxItems: 1
     description: Default is 0x3a, but can be reprogrammed.
 
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
 required:
   - compatible
   - reg
@@ -50,6 +53,7 @@ examples:
         temp-sensor@3a {
             compatible = "melexis,mlx90632";
             reg = <0x3a>;
+            vdd-supply = <&ldo4_reg>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 721878d5b7af..da0f8dfca8bf 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -14,6 +14,9 @@ description: >
   Bindings for joystick devices connected to ADC controllers supporting
   the Industrial I/O subsystem.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: adc-joystick
@@ -28,6 +31,8 @@ properties:
       https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
       for details.
 
+  poll-interval: true
+
   '#address-cells':
     const: 1
 
@@ -45,6 +50,7 @@ additionalProperties: false
 patternProperties:
   "^axis@[0-9a-f]+$":
     type: object
+    $ref: input.yaml#
     description: >
       Represents a joystick axis bound to the given ADC channel.
       For each entry in the io-channels list, one axis subnode with a matching
@@ -57,15 +63,13 @@ patternProperties:
         description: Index of an io-channels list entry bound to this axis.
 
       linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
         description: EV_ABS specific event code generated by the axis.
 
       abs-range:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              - description: minimum value
-              - description: maximum value
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
         description: >
           Minimum and maximum values produced by the axis.
           For an ABS_X axis this will be the left-most and right-most
diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
deleted file mode 100644
index 6c8be6a9ace2..000000000000
--- a/Documentation/devicetree/bindings/input/adc-keys.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-ADC attached resistor ladder buttons
-------------------------------------
-
-Required properties:
- - compatible: "adc-keys"
- - io-channels: Phandle to an ADC channel
- - io-channel-names = "buttons";
- - keyup-threshold-microvolt: Voltage above or equal to which all the keys are
-			      considered up.
-
-Optional properties:
-	- poll-interval: Poll interval time in milliseconds
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-
-Each button (key) is represented as a sub-node of "adc-keys":
-
-Required subnode-properties:
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-	- press-threshold-microvolt: voltage above or equal to which this key is
-				     considered pressed.
-
-No two values of press-threshold-microvolt may be the same.
-All values of press-threshold-microvolt must be less than
-keyup-threshold-microvolt.
-
-Example:
-
-#include <dt-bindings/input/input.h>
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&lradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <2000000>;
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <1500000>;
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <1000000>;
-		};
-
-		button-enter {
-			label = "Enter";
-			linux,code = <KEY_ENTER>;
-			press-threshold-microvolt = <500000>;
-		};
-	};
-
-+--------------------------------+------------------------+
-| 2.000.000 <= value             | no key pressed         |
-+--------------------------------+------------------------+
-| 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
-+--------------------------------+------------------------+
-| 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
-+--------------------------------+------------------------+
-|   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
-+--------------------------------+------------------------+
-|              value <   500.000 | no key pressed         |
-+--------------------------------+------------------------+
diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml
new file mode 100644
index 000000000000..7aa078dead37
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached resistor ladder buttons
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-keys
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: buttons
+
+  keyup-threshold-microvolt:
+    description:
+      Voltage above or equal to which all the keys are considered up.
+
+  poll-interval: true
+  autorepeat: true
+
+patternProperties:
+  '^button-':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each button (key) is represented as a sub-node.
+
+    properties:
+      label: true
+
+      linux,code: true
+
+      press-threshold-microvolt:
+        description:
+          Voltage above or equal to which this key is considered pressed. No
+          two values of press-threshold-microvolt may be the same. All values
+          of press-threshold-microvolt must be less than
+          keyup-threshold-microvolt.
+
+    required:
+      - linux,code
+      - press-threshold-microvolt
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - keyup-threshold-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    // +--------------------------------+------------------------+
+    // | 2.000.000 <= value             | no key pressed         |
+    // +--------------------------------+------------------------+
+    // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
+    // +--------------------------------+------------------------+
+    // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
+    // +--------------------------------+------------------------+
+    // |   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
+    // +--------------------------------+------------------------+
+    // |              value <   500.000 | no key pressed         |
+    // +--------------------------------+------------------------+
+
+    adc-keys {
+        compatible = "adc-keys";
+        io-channels = <&lradc 0>;
+        io-channel-names = "buttons";
+        keyup-threshold-microvolt = <2000000>;
+
+        button-up {
+            label = "Volume Up";
+            linux,code = <KEY_VOLUMEUP>;
+            press-threshold-microvolt = <1500000>;
+        };
+
+        button-down {
+            label = "Volume Down";
+            linux,code = <KEY_VOLUMEDOWN>;
+            press-threshold-microvolt = <1000000>;
+        };
+
+        button-enter {
+            label = "Enter";
+            linux,code = <KEY_ENTER>;
+            press-threshold-microvolt = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..26ea66834ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - keypad,num-rows
+  - keypad,num-columns
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index d74f2002409e..5d631f7137e7 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 LRADC Device Tree Bindings
+title: Allwinner A10 LRADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -18,10 +18,20 @@ properties:
       - items:
           - const: allwinner,sun50i-a64-lradc
           - const: allwinner,sun8i-a83t-r-lradc
+      - const: allwinner,sun50i-r329-lradc
+      - items:
+          - const: allwinner,sun20i-d1-lradc
+          - const: allwinner,sun50i-r329-lradc
 
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -34,14 +44,13 @@ properties:
 patternProperties:
   "^button-[0-9]+$":
     type: object
+    $ref: input.yaml#
     properties:
       label:
         $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Keycode to emit
+      linux,code: true
 
       channel:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -68,6 +77,18 @@ required:
   - interrupts
   - vref-supply
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-lradc
+
+then:
+  required:
+    - clocks
+    - resets
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
index b4ad829d7383..442f623bb294 100644
--- a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -17,6 +17,7 @@ description: |
 
 allOf:
   - $ref: input.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
new file mode 100644
index 000000000000..02e605fac408
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -0,0 +1,955 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7222A/B/C Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch
+  controllers that feature additional sensing capabilities.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7222a
+      - azoteq,iqs7222b
+      - azoteq,iqs7222c
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,max-counts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the maximum number of conversion periods (counts) that can be
+      reported as follows:
+      0: 1023
+      1: 2047
+      2: 4095
+      3: 16384
+
+  azoteq,auto-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the number of conversions to occur before an interrupt is
+      generated as follows:
+      0: 4
+      1: 8
+      2: 16
+      3: 32
+
+  azoteq,ati-frac-div-fine:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI fine fractional divider.
+
+  azoteq,ati-frac-div-coarse:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI coarse fractional divider.
+
+  azoteq,ati-comp-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1023
+    description: Specifies the preloaded ATI compensation selection.
+
+  azoteq,lta-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      low-power mode.
+
+  azoteq,lta-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      normal-power mode.
+
+  azoteq,counts-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during low-power
+      mode.
+
+  azoteq,counts-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during normal-
+      power mode.
+
+  azoteq,lta-fast-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during low-power mode.
+
+  azoteq,lta-fast-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during normal-power mode.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 500
+    minimum: 0
+    maximum: 32767500
+    description:
+      Specifies the delay (in ms) before ATI is retried following an ATI error.
+
+  azoteq,rate-ati-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the rate (in ms) at which ATI status is evaluated.
+
+  azoteq,timeout-np-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,timeout-lp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode to ultra-low-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,timeout-ulp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the rate (in ms) at which channels not regularly sampled during
+      ultra-low-power mode are updated.
+
+  azoteq,rate-ulp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+patternProperties:
+  "^cycle-[0-9]$":
+    type: object
+    description: Represents a conversion cycle serving two sensing channels.
+
+    properties:
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion frequency fraction.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 9
+        items:
+          minimum: 0
+          maximum: 8
+        description: Specifies the CTx pin(s) associated with the cycle.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRx pins instead of grounding them.
+
+      azoteq,dead-time-enable:
+        type: boolean
+        description:
+          Increases the denominator of the conversion frequency formula by one.
+
+      azoteq,tx-freq-fosc:
+        type: boolean
+        description:
+          Fixes the conversion frequency to that of the device's core clock.
+
+      azoteq,vbias-enable:
+        type: boolean
+        description: Enables the bias voltage for use during inductive sensing.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the cycle's sensing mode as follows:
+          0: None
+          1: Self capacitive
+          2: Mutual capacitive
+          3: Inductive
+
+          Note that in the case of IQS7222A, cycles 5 and 6 are restricted to
+          Hall-effect sensing.
+
+      azoteq,iref-enable:
+        type: boolean
+        description:
+          Enables the current reference for use during various sensing modes.
+
+      azoteq,iref-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference level.
+
+      azoteq,iref-trim:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference trim.
+
+    dependencies:
+      azoteq,iref-level: ["azoteq,iref-enable"]
+      azoteq,iref-trim: ["azoteq,iref-enable"]
+
+    additionalProperties: false
+
+  "^channel-([0-9]|1[0-9])$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+      Note that in the case of IQS7222A, channels 10 and 11 are restricted to
+      Hall-effect sensing with events reported on channel 10 only.
+
+    properties:
+      azoteq,ulp-allow:
+        type: boolean
+        description:
+          Permits the device to enter ultra-low-power mode while the channel
+          lies in a state of touch or proximity.
+
+      azoteq,ref-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 9
+        description: Specifies a separate reference channel to be followed.
+
+      azoteq,ref-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the relative weight of the reference channel.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Activates the reference channel in response to proximity events
+          instead of touch events.
+
+      azoteq,ati-band:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI band as a fraction of its ATI target as
+          follows:
+          0: 1/16
+          1: 1/8
+          2: 1/4
+          3: 1/2
+
+      azoteq,global-halt:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze if any
+          other participating channel lies in a proximity or touch state.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity and touch
+          events relative to their respective thresholds.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 7
+        description: Specifies the CRx pin(s) associated with the channel.
+
+      azoteq,samp-cap-double:
+        type: boolean
+        description: Doubles the sampling capacitance from 40 pF to 80 pF.
+
+      azoteq,vref-half:
+        type: boolean
+        description: Halves the discharge threshold from 1.0 V to 0.5 V.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the bias current applied during mutual (projected)
+          capacitive sensing as follows:
+          0: 2 uA
+          1: 5 uA
+          2: 7 uA
+          3: 10 uA
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 2040
+        description: Specifies the channel's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 16
+        minimum: 0
+        maximum: 496
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Compensation
+          2: Compensation divider
+          3: Fine fractional divider
+          4: Coarse fractional divider
+          5: Full
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI compensation divider.
+
+      azoteq,ati-comp-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1023
+        description: Specifies the channel's ATI compensation selection.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce exit factor.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity or touch event reported by the channel.
+
+        properties:
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3 (IQS7222C only)
+              2: GPIO4 (IQS7222C only)
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Specifies the threshold for the event. Valid entries range from
+              0-127 and 0-255 for proximity and touch events, respectively.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description:
+              Specifies the hysteresis for the event (touch events only).
+
+          azoteq,timeout-press-ms:
+            multipleOf: 500
+            minimum: 0
+            maximum: 127500
+            description:
+              Specifies the length of time (in ms) to wait before automatically
+              releasing a press event. Specify zero to allow the press state to
+              persist indefinitely.
+
+              The IQS7222B does not feature channel-specific timeouts; the time-
+              out specified for any one channel applies to all channels.
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            default: 1
+            description:
+              Specifies whether the event is to be interpreted as a key (1)
+              or a switch (5).
+
+        required:
+          - linux,code
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,ref-weight: ["azoteq,ref-select"]
+      azoteq,use-prox: ["azoteq,ref-select"]
+
+    additionalProperties: false
+
+  "^slider-[0-1]$":
+    type: object
+    description: Represents a slider comprising three or four channels.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 9
+        description:
+          Specifies the order of the channels that participate in the slider.
+
+      azoteq,slider-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the slider's one-dimensional resolution, equal to the
+          maximum coordinate plus one.
+
+      azoteq,lower-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's lower starting point.
+
+      azoteq,upper-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's upper starting point.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the speed of movement after which coordinate filtering is
+          no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed of movement after which coordinate filtering is
+          linearly reduced.
+
+      azoteq,bottom-beta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        description:
+          Specifies the coordinate filter damping factor to be applied
+          while the speed of movement is below that which is specified
+          by azoteq,bottom-speed.
+
+      azoteq,static-beta:
+        type: boolean
+        description:
+          Applies the coordinate filter damping factor specified by
+          azoteq,bottom-beta regardless of the speed of movement.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the slider to respond to the proximity states of the selected
+          channels instead of their corresponding touch states. Note the slider
+          cannot report granular coordinates during a state of proximity.
+
+      linux,axis:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the absolute axis to which coordinates are mapped. Specify
+          ABS_WHEEL to operate the slider as a wheel (IQS7222C only).
+
+    patternProperties:
+      "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture (IQS7222A only) event reported by
+          the slider.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            multipleOf: 4
+            minimum: 0
+            maximum: 1020
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all remaining swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 4
+            minimum: 0
+            maximum: 124
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the distance across which a swipe or flick gesture must
+              travel in order to be acknowledged by the device. The number spec-
+              ified for any one swipe or flick gesture applies to all remaining
+              swipe or flick gestures.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3 (IQS7222C only)
+              2: GPIO4 (IQS7222C only)
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+        required:
+          - linux,code
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+  "^gpio-[0-2]$":
+    type: object
+    description: |
+      Represents a GPIO mapped to one or more events as follows:
+      gpio-0: GPIO0
+      gpio-1: GPIO3 (IQS7222C only)
+      gpio-2: GPIO4 (IQS7222C only)
+
+    allOf:
+      - $ref: ../pinctrl/pincfg-node.yaml#
+
+    properties:
+      drive-open-drain: true
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222b
+
+    then:
+      patternProperties:
+        "^cycle-[0-9]$":
+          properties:
+            azoteq,iref-enable: false
+
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ref-select: false
+
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select: false
+
+        "^slider-[0-1]$": false
+
+        "^gpio-[0-2]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222a
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+        "^slider-[0-1]$":
+          properties:
+            azoteq,slider-size:
+              multipleOf: 16
+              maximum: 4080
+
+            azoteq,top-speed:
+              multipleOf: 4
+              maximum: 1020
+
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+    else:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ulp-allow: false
+
+        "^slider-[0-1]$":
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gesture-max-ms: false
+
+                azoteq,gesture-min-ms: false
+
+                azoteq,gesture-dist: false
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs7222a@44 {
+                    compatible = "azoteq,iqs7222a";
+                    reg = <0x44>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    azoteq,lta-beta-lp = <7>;
+                    azoteq,lta-beta-np = <8>;
+                    azoteq,counts-beta-lp = <2>;
+                    azoteq,counts-beta-np = <3>;
+                    azoteq,lta-fast-beta-lp = <3>;
+                    azoteq,lta-fast-beta-np = <4>;
+
+                    cycle-0 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>, <2>, <4>, <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-1 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-2 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <4>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-3 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <2>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-4 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-5 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    cycle-6 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    channel-0 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-1 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-2 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-3 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-4 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-5 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <144>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-6 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+
+                    channel-7 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+                    };
+
+                    channel-8 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+                    };
+
+                    channel-9 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel-10 {
+                            azoteq,ulp-allow;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                                    linux,input-type = <EV_SW>;
+                            };
+                    };
+
+                    channel-11 {
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+                    };
+
+                    slider-0 {
+                            azoteq,channel-select = <1>, <2>, <3>, <4>;
+                            azoteq,slider-size = <4080>;
+                            azoteq,upper-cal = <50>;
+                            azoteq,lower-cal = <30>;
+                            azoteq,top-speed = <200>;
+                            azoteq,bottom-speed = <1>;
+                            azoteq,bottom-beta = <3>;
+
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                                    azoteq,gesture-max-ms = <600>;
+                                    azoteq,gesture-min-ms = <24>;
+                            };
+
+                            event-flick-pos {
+                                    linux,code = <KEY_NEXTSONG>;
+                                    azoteq,gesture-max-ms = <600>;
+                                    azoteq,gesture-dist = <816>;
+                            };
+
+                            event-flick-neg {
+                                    linux,code = <KEY_PREVIOUSSONG>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
index 5f9fbc68e58a..e5eef59a93dc 100644
--- a/Documentation/devicetree/bindings/input/da9062-onkey.txt
+++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt
@@ -2,7 +2,7 @@
 
 This module is part of the DA9061/DA9062/DA9063. For more details about entire
 DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
 
 This module provides the KEY_POWER event.
 
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 000000000000..05e6f2df604c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTH6915 touchscreen controller
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Elan eKTH6915 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+properties:
+  compatible:
+    items:
+      - const: elan,ekth6915
+
+  reg:
+    const: 0x10
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description:
+      The IO supply to the touchscreen. Need not be specified if this is the
+      same as the 3.3V supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@10 {
+        compatible = "elan,ekth6915";
+        reg = <0x10>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 878464f128dc..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -57,7 +57,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             interrupt-parent = <&gpio1>;
@@ -77,7 +77,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 000000000000..e6266d188266
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU key bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-key
+      - const: fsl,imx-sc-key
+
+  linux,keycodes:
+    maxItems: 1
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+
+    keys {
+        compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+        linux,keycodes = <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
index 5377b232fa10..e05690b3e963 100644
--- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -10,20 +10,21 @@ title: ChromeOS EC Keyboard
 maintainers:
   - Simon Glass <sjg@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC Keyboard is a simple matrix keyboard
   implemented on a separate EC (Embedded Controller) device. It provides
   a message for reading key scans from the EC. These are then converted
-  into keycodes for processing by the kernel.
-
-allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  into keycodes for processing by the kernel. This device also supports
+  switches/buttons like power and volume buttons.
 
 properties:
   compatible:
-    const: google,cros-ec-keyb
+    oneOf:
+      - description: ChromeOS EC with only buttons/switches
+        const: google,cros-ec-keyb-switches
+      - description: ChromeOS EC with keyboard and possibly buttons/switches
+        const: google,cros-ec-keyb
 
   google,needs-ghost-filter:
     description:
@@ -32,6 +33,7 @@ properties:
     type: boolean
 
   function-row-physmap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 15
     description: |
@@ -42,15 +44,31 @@ properties:
       where the lower 16 bits are reserved. This property is specified only
       when the keyboard has a custom design for the top row keys.
 
+dependencies:
+  function-row-phsymap: [ 'linux,keymap' ]
+  google,needs-ghost-filter: [ 'linux,keymap' ]
+
 required:
   - compatible
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-keyb
+then:
+  $ref: "/schemas/input/matrix-keymap.yaml#"
+  required:
+    - keypad,num-rows
+    - keypad,num-columns
+    - linux,keymap
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/input/input.h>
-    cros-ec-keyb {
+    keyboard-controller {
         compatible = "google,cros-ec-keyb";
         keypad,num-rows = <8>;
         keypad,num-columns = <13>;
@@ -114,3 +132,9 @@ examples:
             /* UP      LEFT    */
             0x070b0067 0x070c0069>;
     };
+  - |
+    /* No matrix keyboard, just buttons/switches */
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb-switches";
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index dbe7ecc19ccb..17ac9dff7972 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -15,113 +15,106 @@ properties:
       - gpio-keys
       - gpio-keys-polled
 
+  autorepeat: true
+
+  label:
+    description: Name of entire device
+
+  poll-interval: true
+
 patternProperties:
-  ".*":
-    if:
-      type: object
-    then:
-      $ref: input.yaml#
+  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+    $ref: input.yaml#
 
-      properties:
-        gpios:
-          maxItems: 1
+    properties:
+      gpios:
+        maxItems: 1
 
-        interrupts:
-          maxItems: 1
+      interrupts:
+        maxItems: 1
 
-        label:
-          description: Descriptive name of the key.
+      label:
+        description: Descriptive name of the key.
 
-        linux,code:
-          description: Key / Axis code to emit.
-          $ref: /schemas/types.yaml#/definitions/uint32
+      linux,code:
+        description: Key / Axis code to emit.
 
-        linux,input-type:
-          description:
-            Specify event type this button/key generates. If not specified defaults to
-            <1> == EV_KEY.
-          $ref: /schemas/types.yaml#/definitions/uint32
+      linux,input-type:
+        default: 1  # EV_KEY
 
-          default: 1
+      linux,input-value:
+        description: |
+          If linux,input-type is EV_ABS or EV_REL then this
+          value is sent for events this button generates when pressed.
+          EV_ABS/EV_REL axis will generate an event with a value of 0
+          when all buttons with linux,input-type == type and
+          linux,code == axis are released. This value is interpreted
+          as a signed 32 bit value, e.g. to make a button generate a
+          value of -1 use:
 
-        linux,input-value:
-          description: |
-            If linux,input-type is EV_ABS or EV_REL then this
-            value is sent for events this button generates when pressed.
-            EV_ABS/EV_REL axis will generate an event with a value of 0
-            when all buttons with linux,input-type == type and
-            linux,code == axis are released. This value is interpreted
-            as a signed 32 bit value, e.g. to make a button generate a
-            value of -1 use:
+          linux,input-value = <0xffffffff>; /* -1 */
 
-            linux,input-value = <0xffffffff>; /* -1 */
+        $ref: /schemas/types.yaml#/definitions/uint32
 
-          $ref: /schemas/types.yaml#/definitions/uint32
+      debounce-interval:
+        description:
+          Debouncing interval time in milliseconds. If not specified defaults to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
 
-        debounce-interval:
-          description:
-            Debouncing interval time in milliseconds. If not specified defaults to 5.
-          $ref: /schemas/types.yaml#/definitions/uint32
+        default: 5
 
-          default: 5
+      wakeup-source:
+        description: Button can wake-up the system.
 
-        wakeup-source:
-          description: Button can wake-up the system.
+      wakeup-event-action:
+        description: |
+          Specifies whether the key should wake the system when asserted, when
+          deasserted, or both. This property is only valid for keys that wake up the
+          system (e.g., when the "wakeup-source" property is also provided).
 
-        wakeup-event-action:
-          description: |
-            Specifies whether the key should wake the system when asserted, when
-            deasserted, or both. This property is only valid for keys that wake up the
-            system (e.g., when the "wakeup-source" property is also provided).
+          Supported values are defined in linux-event-codes.h:
 
-            Supported values are defined in linux-event-codes.h:
+            EV_ACT_ANY        - both asserted and deasserted
+            EV_ACT_ASSERTED   - asserted
+            EV_ACT_DEASSERTED - deasserted
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
 
-              EV_ACT_ANY        - both asserted and deasserted
-              EV_ACT_ASSERTED   - asserted
-              EV_ACT_DEASSERTED - deasserted
-          $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [0, 1, 2]
+      linux,can-disable:
+        description:
+          Indicates that button is connected to dedicated (not shared) interrupt
+          which can be disabled to suppress events from the button.
+        type: boolean
 
-        linux,can-disable:
-          description:
-            Indicates that button is connected to dedicated (not shared) interrupt
-            which can be disabled to suppress events from the button.
-          type: boolean
+    required:
+      - linux,code
 
-        pinctrl-0:
-          maxItems: 1
+    anyOf:
+      - required:
+          - interrupts
+      - required:
+          - interrupts-extended
+      - required:
+          - gpios
 
-        pinctrl-names:
-          maxItems: 1
+    dependencies:
+      wakeup-event-action: [ wakeup-source ]
+      linux,input-value: [ gpios ]
 
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          const: gpio-keys-polled
+    then:
       required:
-        - linux,code
-
-      anyOf:
-        - required:
-            - interrupts
-        - required:
-            - gpios
-
-      dependencies:
-        wakeup-event-action: [ wakeup-source ]
-        linux,input-value: [ gpios ]
-
-      unevaluatedProperties: false
-
-if:
-  properties:
-    compatible:
-      const: gpio-keys-polled
-then:
-  properties:
-    poll-interval:
-      description:
-        Poll interval time in milliseconds
-      $ref: /schemas/types.yaml#/definitions/uint32
-
-  required:
-    - poll-interval
+        - poll-interval
+    else:
+      properties:
+        poll-interval: false
 
 additionalProperties: false
 
@@ -133,13 +126,13 @@ examples:
         compatible = "gpio-keys";
         autorepeat;
 
-        up {
+        key-up {
             label = "GPIO Key UP";
             linux,code = <103>;
             gpios = <&gpio1 0 1>;
         };
 
-        down {
+        key-down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
             interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
deleted file mode 100644
index 34c43d3bddfd..000000000000
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
-  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply (3.3V)
-    - vddl-supply (1.8V)
-    - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
-  or powering it on, before it is ready for communication.
-- touchscreen-inverted-x: See touchscreen.txt
-- touchscreen-inverted-y: See touchscreen.txt
-
-Example:
-
-	i2c-hid-dev@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <3 2>;
-	};
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000000..7156b08f7645
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+  - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hid@2c {
+            compatible = "hid-over-i2c";
+            reg = <0x2c>;
+            hid-descr-addr = <0x0020>;
+            interrupts = <3 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 000000000000..29a1879e356d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The IBM Operation Panel provides a simple interface to control the connected
+  server. It has a display and three buttons: two directional arrows and one
+  'Enter' button.
+
+properties:
+  compatible:
+    const: ibm,op-panel
+
+  reg:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ibm-op-panel@62 {
+            compatible = "ibm,op-panel";
+            reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
deleted file mode 100644
index cdcaa3f52d25..000000000000
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
-
-Required properties:
-- compatible:
-    ilitek,ili210x for ILI210x
-    ilitek,ili2117 for ILI2117
-    ilitek,ili2120 for ILI2120
-    ilitek,ili251x for ILI251x
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchscreen's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
-	touchscreen@41 {
-		compatible = "ilitek,ili251x";
-		reg = <0x41>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
index f21db81206b4..7514df62b592 100644
--- a/Documentation/devicetree/bindings/input/imx-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/imx-keypad.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Keypad Port(KPP) device tree bindings
+title: Freescale i.MX Keypad Port(KPP)
 
 maintainers:
   - Liu Ying <gnuiyl@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index d41d8743aad4..17512f4347fd 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -21,7 +21,26 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minimum: 0
-      maximum: 0xff
+      maximum: 0x2ff
+
+  linux,code:
+    description:
+      Specifies a single numeric keycode value to be used for reporting
+      button/switch events. Specify KEY_RESERVED (0) to opt out of event
+      reporting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x2ff
+
+  linux,input-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1   # EV_KEY
+      - 2   # EV_REL
+      - 3   # EV_ABS
+      - 5   # EV_SW
+    description:
+      Specifies whether the event is to be interpreted as a key, relative,
+      absolute, or switch.
 
   poll-interval:
     description: Poll interval time in milliseconds.
@@ -39,4 +58,7 @@ properties:
       reset automatically. Device with key pressed reset feature can specify
       this property.
 
+dependencies:
+  linux,input-type: [ "linux,code" ]
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 9c154e5e1a91..3c430d38594f 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -370,6 +370,7 @@ patternProperties:
     patternProperties:
       "^event-prox(-alt)?$":
         type: object
+        $ref: input.yaml#
         description:
           Represents a proximity event reported by the channel in response to
           a decrease in counts. Node names suffixed with '-alt' instead corre-
@@ -396,14 +397,13 @@ patternProperties:
             default: 10
             description: Specifies the threshold for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
       "^event-touch(-alt)?$":
         type: object
+        $ref: input.yaml#
         description: Represents a touch event reported by the channel.
 
         properties:
@@ -421,14 +421,13 @@ patternProperties:
             default: 4
             description: Specifies the hysteresis for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
       "^event-deep(-alt)?$":
         type: object
+        $ref: input.yaml#
         description: Represents a deep-touch event reported by the channel.
 
         properties:
@@ -446,9 +445,7 @@ patternProperties:
             default: 0
             description: Specifies the hysteresis for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
@@ -475,7 +472,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs269a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
index 0cb736c541c9..7a27502095f3 100644
--- a/Documentation/devicetree/bindings/input/iqs626a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -449,6 +449,7 @@ patternProperties:
     patternProperties:
       "^event-(prox|touch|deep)(-alt)?$":
         type: object
+        $ref: input.yaml#
         description:
           Represents a proximity, touch or deep-touch event reported by the
           channel in response to a decrease in counts. Node names suffixed with
@@ -487,21 +488,15 @@ patternProperties:
               Specifies the hysteresis for the event (touch and deep-touch
               events only).
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
           linux,input-type:
-            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [1, 5]
             description:
               Specifies whether the event is to be interpreted as a key (1) or
               a switch (5). By default, Hall-channel events are interpreted as
               switches and all others are interpreted as keys.
 
-        dependencies:
-          linux,input-type: ["linux,code"]
-
         additionalProperties: false
 
     dependencies:
@@ -511,6 +506,7 @@ patternProperties:
 
   "^trackpad-3x[2-3]$":
     type: object
+    $ref: input.yaml#
     description:
       Represents all channels associated with the trackpad. The channels are
       collectively active if the trackpad is defined and inactive otherwise.
@@ -679,7 +675,6 @@ patternProperties:
           Specifies the raw count filter strength during low-power mode.
 
       linux,keycodes:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 6
         description: |
@@ -751,7 +746,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs626a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
index 77fe3b545b35..0aa951f0ab92 100644
--- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -9,6 +9,9 @@ title: Azoteq IQS620A/621/622/624/625 Keys and Switches
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
   feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
@@ -30,7 +33,6 @@ properties:
       - azoteq,iqs625-keys
 
   linux,keycodes:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 16
     description: |
@@ -89,15 +91,14 @@ properties:
 patternProperties:
   "^hall-switch-(north|south)$":
     type: object
+    $ref: input.yaml#
     description:
       Represents north/south-field Hall-effect sensor touch or proximity
       events. Note that north/south-field orientation is reversed on the
       IQS620AXzCSR device due to its flip-chip package.
 
     properties:
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Numeric switch code associated with the event.
+      linux,code: true
 
       azoteq,use-prox:
         $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 3a2ad6ec64db..48edc0c8c1dd 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -16,15 +16,15 @@ description: |
   The onkey controller is represented as a sub-node of the PMIC node on
   the device tree.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: maxim,max77650-onkey
 
   linux,code:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      The key-code to be reported when the key is pressed. Defaults
-      to KEY_POWER.
+    default: 116  # KEY_POWER
 
   maxim,onkey-slide:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
new file mode 100644
index 000000000000..d768c30f48fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller
+
+maintainers:
+  - Mattijs Korpershoek <mkorpershoek@baylibre.com>
+
+allOf:
+  - $ref: "/schemas/input/matrix-keymap.yaml#"
+
+description: |
+  Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6779-keypad
+      - items:
+          - enum:
+              - mediatek,mt6873-keypad
+          - const: mediatek,mt6779-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kpd
+
+  wakeup-source:
+    description: use any event on keypad as wakeup event
+    type: boolean
+
+  debounce-delay-ms:
+    maximum: 256
+    default: 16
+
+  mediatek,keys-per-group:
+    description: each (row, column) group has multiple keys
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        keyboard@10010000 {
+          compatible = "mediatek,mt6779-keypad";
+          reg = <0 0x10010000 0 0x1000>;
+          interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+          clocks = <&clk26m>;
+          clock-names = "kpd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 000000000000..2f72ec418415
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  There are two key functions provided by MT6397, MT6323 and other MediaTek
+  PMICs: pwrkey and homekey.
+  The key functions are defined as the subnode of the function node provided
+  by the PMIC that is defined as a Multi-Function Device (MFD).
+
+  For MediaTek MT6323/MT6397 PMIC bindings see
+  Documentation/devicetree/bindings/mfd/mt6397.txt
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6323-keys
+      - mediatek,mt6331-keys
+      - mediatek,mt6358-keys
+      - mediatek,mt6397-keys
+
+  power-off-time-sec: true
+
+  mediatek,long-press-mode:
+    description: |
+      Key long-press force shutdown setting
+      0 - disabled
+      1 - pwrkey
+      2 - pwrkey+homekey
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 2
+
+patternProperties:
+  "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+    $ref: input.yaml#
+
+    properties:
+      interrupts:
+        minItems: 1
+        items:
+          - description: Key press interrupt
+          - description: Key release interrupt
+
+      interrupt-names: true
+
+      linux-keycodes:
+        maxItems: 1
+
+      wakeup-source: true
+
+    required:
+      - linux,keycodes
+
+    if:
+      properties:
+        interrupt-names:
+          contains:
+            const: powerkey
+    then:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: powerkey
+            - const: powerkey_r
+    else:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: homekey
+            - const: homekey_r
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        compatible = "mediatek,mt6397";
+
+        keys {
+          compatible = "mediatek,mt6397-keys";
+          mediatek,long-press-mode = <1>;
+          power-off-time-sec = <0>;
+
+          key-power {
+            linux,keycodes = <KEY_POWER>;
+            wakeup-source;
+          };
+
+          key-home {
+            linux,keycodes = <KEY_VOLUMEDOWN>;
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index d5d6bced3148..96358b12f9b2 100644
--- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -112,7 +112,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      cap1188@28 {
+      touch@28 {
         compatible = "microchip,cap1188";
         interrupt-parent = <&gpio1>;
         interrupts = <0 0>;
diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
deleted file mode 100644
index 535d92885372..000000000000
--- a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-MediaTek MT6397/MT6323 PMIC Keys Device Driver
-
-There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
-and homekey. The key functions are defined as the subnode of the function
-node provided by MT6397/MT6323 PMIC that is being defined as one kind
-of Muti-Function Device (MFD)
-
-For MT6397/MT6323 MFD bindings see:
-Documentation/devicetree/bindings/mfd/mt6397.txt
-
-Required properties:
-- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Optional Properties:
-- wakeup-source: See Documentation/devicetree/bindings/power/wakeup-source.txt
-- mediatek,long-press-mode: Long press key shutdown setting, 1 for
-	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
-- power-off-time-sec: See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-	pmic: mt6397 {
-		compatible = "mediatek,mt6397";
-
-		...
-
-		mt6397keys: mt6397keys {
-			compatible = "mediatek,mt6397-keys";
-			mediatek,long-press-mode = <1>;
-			power-off-time-sec = <0>;
-
-			power {
-				linux,keycodes = <116>;
-				wakeup-source;
-			};
-
-			home {
-				linux,keycodes = <114>;
-			};
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 000000000000..e4a0ac0fff9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard device tree bindings
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+  It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+  subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+  compatible:
+    const: pine64,pinephone-keyboard
+
+  reg:
+    const: 0x15
+
+  interrupts:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply for the keyboard MCU
+
+  wakeup-source: true
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      keyboard@15 {
+        compatible = "pine64,pinephone-keyboard";
+        reg = <0x15>;
+        interrupt-parent = <&r_pio>;
+        interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          charger@75 {
+            reg = <0x75>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe21..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
-                           nanoseconds, defaults to 50% of the channel's
-			   period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-/ {
-	pwm8: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 1000000000 0>,
-                       <&pwm8 0 1000000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <1000000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 000000000000..a70a636ee112
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/pwm-vibrator.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: PWM vibrator
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Registers a PWM device as vibrator. It is expected, that the vibrator's
+  strength increases based on the duty cycle of the enable PWM channel
+  (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+  The binding supports an optional direction PWM channel, that can be
+  driven at fixed duty cycle. If available this is can be used to increase
+  the vibration effect of some devices.
+
+properties:
+  compatible:
+    const: pwm-vibrator
+
+  pwm-names:
+    items:
+      - const: enable
+      - const: direction
+    minItems: 1
+
+  pwms:
+    minItems: 1
+    maxItems: 2
+
+  vcc-supply: true
+
+  direction-duty-cycle-ns:
+    description: >
+      Duty cycle of the direction PWM channel in nanoseconds,
+      defaults to 50% of the channel's period.
+
+required:
+  - compatible
+  - pwm-names
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    vibrator {
+        compatible = "pwm-vibrator";
+        pwms = <&pwm9 0 1000000000 0>,
+               <&pwm8 0 1000000000 0>;
+        pwm-names = "enable", "direction";
+        direction-duty-cycle-ns = <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
deleted file mode 100644
index 64bb990075c3..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Qualcomm PM8xxx PMIC Vibrator
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-vib"
-		    "qcom,pm8916-vib"
-		    "qcom,pm8921-vib"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of vibration control register
-
-EXAMPLE
-
-	vibrator@4a {
-		compatible = "qcom,pm8058-vib";
-		reg = <0x4a>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 000000000000..c8832cd0d7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-vib
+      - qcom,pm8916-vib
+      - qcom,pm8921-vib
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@4a {
+            compatible = "qcom,pm8058-vib";
+            reg = <0x4a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
index b1ae72f9cd2d..627891e1ef55 100644
--- a/Documentation/devicetree/bindings/input/regulator-haptic.yaml
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Regulator Haptic Device Tree Bindings
+title: Regulator Haptic
 
 maintainers:
   - Jaewon Kim <jaewon02.kim@samsung.com>
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
index 5d67fc8ebc18..a401a0bfcbec 100644
--- a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27xx PMIC Vibrator Device Tree Bindings
+title: Spreadtrum SC27xx PMIC Vibrator
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
index f40f21c642b9..b8db975e9f77 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -17,10 +17,10 @@ Example:
 		auo_pixcir_ts@5c {
 			compatible = "auo,auo_pixcir_ts";
 			reg = <0x5c>;
-			interrupts = <2 0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 
-			gpios = <&gpf 2 0 2>, /* INT */
-				<&gpf 5 1 0>; /* RST */
+			gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+				<&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
 
 			x-size = <800>;
 			y-size = <600>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index 2e1490a8fe74..ca304357c374 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -3,15 +3,16 @@
 Required Properties:
 - compatible must be toradex,vf50-touchscreen
 - io-channels: adc channels being used by the Colibri VF50 module
+    IIO ADC for Y-, X-, Y+, X+ connections
 - xp-gpios: FET gate driver for input of X+
 - xm-gpios: FET gate driver for input of X-
 - yp-gpios: FET gate driver for input of Y+
 - ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection
-- pinctrl-names: "idle", "default", "gpios"
-- pinctrl-0: pinctrl node for pen/touch detection state pinmux
+- interrupts: pen irq interrupt for touch detection, signal from X plate
+- pinctrl-names: "idle", "default"
+- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
+    pull-up resistor on X+, X-.
 - pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
 - vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
 
 Example:
@@ -26,9 +27,8 @@ Example:
 		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "idle","default","gpios";
-		pinctrl-0 = <&pinctrl_touchctrl_idle>;
-		pinctrl-1 = <&pinctrl_touchctrl_default>;
-		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		pinctrl-names = "idle","default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
 		vf50-ts-min-pressure = <200>;
 	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 2e8da7470513..46bc8c028fe6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -85,6 +85,14 @@ properties:
     minimum: 0
     maximum: 80
 
+  report-rate-hz:
+    description: |
+                 Allows setting the scan rate in Hertz.
+                  M06 supports range from 30 to 140 Hz.
+                  M12 supports range from 1 to 255 Hz.
+    minimum: 1
+    maximum: 255
+
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-fuzz-x: true
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
index 5eef5e7d6aae..c9f2c9f578e3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -6,7 +6,7 @@ Required properties:
  - interrupts		  : interrupt specification for the ektf2127 interrupt
  - power-gpios		  : GPIO specification for the pin connected to the
 			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of it's low power state
+			    to take ektf2127 out of its low power state
 
 For additional optional properties see: touchscreen.txt
 
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
index a9b53c2e6f0a..f9053e5e9b24 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -14,9 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ektf3624
-      - elan,ekth3500
+    oneOf:
+      - enum:
+          - elan,ektf3624
+          - elan,ekth3500
+      - items:
+          - const: elan,ekth3915
+          - const: elan,ekth3500
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index 93f2ce3130ae..19ac9da421df 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - goodix,gt1151
+      - goodix,gt1158
       - goodix,gt5663
       - goodix,gt5688
       - goodix,gt911
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
index a190e7baac31..9f7328999756 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -15,6 +15,9 @@ allOf:
 properties:
   compatible:
     enum:
+      - ilitek,ili210x
+      - ilitek,ili2117
+      - ilitek,ili2120
       - ilitek,ili2130
       - ilitek,ili2131
       - ilitek,ili2132
@@ -22,11 +25,12 @@ properties:
       - ilitek,ili2322
       - ilitek,ili2323
       - ilitek,ili2326
+      - ilitek,ili251x
       - ilitek,ili2520
       - ilitek,ili2521
 
   reg:
-    const: 0x41
+    maxItems: 1
 
   interrupts:
     maxItems: 1
@@ -50,7 +54,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - reset-gpios
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000000..e3a2b871e50c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller bindings
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - imagis,ist3038c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@50 {
+        compatible = "imagis,ist3038c";
+        reg = <0x50>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ldo1_reg>;
+        vddio-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index c549924603d2..238b51555c04 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -54,8 +54,7 @@ Optional properties common with MFD (deprecated):
 				1 -> 3.25 MHz
 				2 || 3 -> 6.5 MHz
 
-Node name must be stmpe_touchscreen and should be child node of stmpe node to
-which it belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Note that common ADC settings of stmpe_touchscreen (child) will take precedence
 over the settings done in MFD.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 000000000000..b4e5ba7c0b49
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller bindings
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
deleted file mode 100644
index 446efb9f5f55..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device tree bindings for Zinitx BT541 touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "zinitix,bt541"
- - reg			: I2C address of the chip. Should be 0x20
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - vdd-supply		: Analog power supply regulator on VCCA pin
- - vddo-supply		: Digital power supply regulator on VDD pin
- - zinitix,mode		: Mode of reporting touch points. Some modes may not work
-			  with a particular ts firmware for unknown reasons. Available
-			  modes are 1 and 2. Mode 2 is the default and preferred.
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		bt541@20 {
-			compatible = "zinitix,bt541";
-			reg = <0x20>;
-			interrupt-parent = <&msmgpio>;
-			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tsp_default>;
-			vdd-supply = <&reg_vdd_tsp>;
-			vddo-supply = <&pm8916_l6>;
-			touchscreen-size-x = <540>;
-			touchscreen-size-y = <960>;
-			zinitix,mode = <2>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index b8204ed22dd5..f7a5e31c506e 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Generic i.MX bus frequency device
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description: |
   The i.MX SoC family has multiple buses for which clock frequency (and
@@ -26,14 +26,16 @@ properties:
     oneOf:
       - items:
           - enum:
-              - fsl,imx8mn-nic
               - fsl,imx8mm-nic
+              - fsl,imx8mn-nic
+              - fsl,imx8mp-nic
               - fsl,imx8mq-nic
           - const: fsl,imx8m-nic
       - items:
           - enum:
-              - fsl,imx8mn-noc
               - fsl,imx8mm-noc
+              - fsl,imx8mn-noc
+              - fsl,imx8mp-noc
               - fsl,imx8mq-noc
           - const: fsl,imx8m-noc
       - const: fsl,imx8m-nic
@@ -45,7 +47,8 @@ properties:
     maxItems: 1
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
   fsl,ddrc:
     $ref: "/schemas/types.yaml#/definitions/phandle"
diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
new file mode 100644
index 000000000000..58611ba2a0f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
+
+maintainers:
+  - Jia-Wei Chang <jia-wei.chang@mediatek.com>
+  - Johnson Wang <johnson.wang@mediatek.com>
+
+description: |
+  MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
+  MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
+  hardware. It can also optimize the voltage to reduce the power consumption.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-cci
+      - mediatek,mt8186-cci
+
+  clocks:
+    items:
+      - description:
+          The multiplexer for clock input of the bus.
+      - description:
+          A parent of "bus" clock which is used as an intermediate clock source
+          when the original clock source (PLL) is under transition and not
+          stable yet.
+
+  clock-names:
+    items:
+      - const: cci
+      - const: intermediate
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  proc-supply:
+    description:
+      Phandle of the regulator for CCI that provides the supply voltage.
+
+  sram-supply:
+    description:
+      Phandle of the regulator for sram of CCI that provides the supply
+      voltage. When it is present, the implementation needs to do
+      "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
+      SoC specific needs. When absent, the voltage scaling flow is handled by
+      hardware, hence no software "voltage tracking" is needed.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - proc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    cci: cci {
+        compatible = "mediatek,mt8183-cci";
+        clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+                 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+        clock-names = "cci", "intermediate";
+        operating-points-v2 = <&cci_opp>;
+        proc-supply = <&mt6358_vproc12_reg>;
+    };
+
+    cci_opp: opp-table-cci {
+        compatible = "operating-points-v2";
+        opp-shared;
+        opp2_00: opp-273000000 {
+            opp-hz = /bits/ 64 <273000000>;
+            opp-microvolt = <650000>;
+        };
+        opp2_01: opp-338000000 {
+            opp-hz = /bits/ 64 <338000000>;
+            opp-microvolt = <687500>;
+        };
+        opp2_02: opp-403000000 {
+            opp-hz = /bits/ 64 <403000000>;
+            opp-microvolt = <718750>;
+        };
+        opp2_03: opp-463000000 {
+            opp-hz = /bits/ 64 <463000000>;
+            opp-microvolt = <756250>;
+        };
+        opp2_04: opp-546000000 {
+            opp-hz = /bits/ 64 <546000000>;
+            opp-microvolt = <800000>;
+        };
+        opp2_05: opp-624000000 {
+            opp-hz = /bits/ 64 <624000000>;
+            opp-microvolt = <818750>;
+        };
+        opp2_06: opp-689000000 {
+            opp-hz = /bits/ 64 <689000000>;
+            opp-microvolt = <850000>;
+        };
+        opp2_07: opp-767000000 {
+            opp-hz = /bits/ 64 <767000000>;
+            opp-microvolt = <868750>;
+        };
+        opp2_08: opp-845000000 {
+            opp-hz = /bits/ 64 <845000000>;
+            opp-microvolt = <893750>;
+        };
+        opp2_09: opp-871000000 {
+            opp-hz = /bits/ 64 <871000000>;
+            opp-microvolt = <906250>;
+        };
+        opp2_10: opp-923000000 {
+            opp-hz = /bits/ 64 <923000000>;
+            opp-microvolt = <931250>;
+        };
+        opp2_11: opp-962000000 {
+            opp-hz = /bits/ 64 <962000000>;
+            opp-microvolt = <943750>;
+        };
+        opp2_12: opp-1027000000 {
+            opp-hz = /bits/ 64 <1027000000>;
+            opp-microvolt = <975000>;
+        };
+        opp2_13: opp-1092000000 {
+            opp-hz = /bits/ 64 <1092000000>;
+            opp-microvolt = <1000000>;
+        };
+        opp2_14: opp-1144000000 {
+            opp-hz = /bits/ 64 <1144000000>;
+            opp-microvolt = <1025000>;
+        };
+        opp2_15: opp-1196000000 {
+            opp-hz = /bits/ 64 <1196000000>;
+            opp-microvolt = <1050000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
index e23df4836c6f..eec987640b37 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -45,20 +45,20 @@ additionalProperties: false
 
 examples:
   # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
-    apps_bcm_voter: bcm_voter {
+    apps_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
     };
 
   # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
     #include <dt-bindings/interconnect/qcom,icc.h>
 
-    disp_bcm_voter: bcm_voter {
+    disp_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
         qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
new file mode 100644
index 000000000000..2684562df4d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Interconnect Bandwidth Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Bandwidth Monitor measures current throughput on buses between various NoC
+  fabrics and provides information when it crosses configured thresholds.
+
+  Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845::
+   - Measuring the bandwidth between CPUs and Last Level Cache Controller -
+     called just BWMON,
+   - Measuring the bandwidth between Last Level Cache Controller and memory
+     (DDR) - called LLCC BWMON.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7280-bwmon
+              - qcom,sdm845-bwmon
+          - const: qcom,msm8998-bwmon
+      - const: qcom,msm8998-bwmon       # BWMON v4
+      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
+      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  reg:
+    # BWMON v4 (currently described) and BWMON v5 use one register address
+    # space.  BWMON v2 uses two register spaces - not yet described.
+    maxItems: 1
+
+required:
+  - compatible
+  - interconnects
+  - interrupts
+  - operating-points-v2
+  - opp-table
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu@1436400 {
+        compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon";
+        reg = <0x01436400 0x600>;
+        interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+        interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+        operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+        cpu_bwmon_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-0 {
+                opp-peak-kBps = <4800000>;
+            };
+            opp-1 {
+                opp-peak-kBps = <9216000>;
+            };
+            opp-2 {
+                opp-peak-kBps = <15052800>;
+            };
+            opp-3 {
+                opp-peak-kBps = <20889600>;
+            };
+            opp-4 {
+                opp-peak-kBps = <25497600>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index e701524ee811..bf538c0c5a81 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-osm-l3
+      - qcom,sc7280-epss-l3
       - qcom,sc8180x-osm-l3
       - qcom,sdm845-osm-l3
       - qcom,sm8150-osm-l3
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
new file mode 100644
index 000000000000..f65a2fe846de
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Network-On-Chip interconnect
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Qualcomm QCM2290 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcm2290-bimc
+      - qcom,qcm2290-cnoc
+      - qcom,qcm2290-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,qcm2290-qup-virt
+          - qcom,qcm2290-mmrt-virt
+          - qcom,qcm2290-mmnrt-virt
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,qcm2290-snoc";
+        reg = <0x01880000 0x60200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+
+        qup_virt: interconnect-qup {
+            compatible = "qcom,qcm2290-qup-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_QUP_CLK>,
+                     <&rpmcc RPM_SMD_QUP_A_CLK>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,qcm2290-mmnrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
+                     <&rpmcc RPM_SMD_MMNRT_A_CLK>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,qcm2290-mmrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
+                     <&rpmcc RPM_SMD_MMRT_A_CLK>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,qcm2290-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+                 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+    };
+
+    bimc: interconnect@4480000 {
+        compatible = "qcom,qcm2290-bimc";
+        reg = <0x04480000 0x80000>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 983d71fb5399..4b37aa88a375 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -26,23 +26,41 @@ properties:
       - qcom,msm8939-bimc
       - qcom,msm8939-pcnoc
       - qcom,msm8939-snoc
-      - qcom,msm8939-snoc-mm
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
       - qcom,qcs404-bimc
       - qcom,qcs404-pcnoc
       - qcom,qcs404-snoc
+      - qcom,sdm660-a2noc
+      - qcom,sdm660-bimc
+      - qcom,sdm660-cnoc
+      - qcom,sdm660-gnoc
+      - qcom,sdm660-mnoc
+      - qcom,sdm660-snoc
 
   '#interconnect-cells':
-    const: 1
+    description: |
+      Value: <1> is one cell in an interconnect specifier for the
+      interconnect node id, <2> requires the interconnect node id and an
+      extra path tag.
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 2
+    maxItems: 7
 
   clock-names:
-    items:
-      - const: bus
-      - const: bus_a
+    minItems: 2
+    maxItems: 7
 
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -53,6 +71,150 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-bimc
+              - qcom,msm8916-pcnoc
+              - qcom,msm8916-snoc
+              - qcom,msm8939-bimc
+              - qcom,msm8939-pcnoc
+              - qcom,msm8939-snoc
+              - qcom,msm8996-a1noc
+              - qcom,msm8996-a2noc
+              - qcom,msm8996-bimc
+              - qcom,msm8996-cnoc
+              - qcom,msm8996-pnoc
+              - qcom,msm8996-snoc
+              - qcom,qcs404-bimc
+              - qcom,qcs404-pcnoc
+              - qcom,qcs404-snoc
+              - qcom,sdm660-bimc
+              - qcom,sdm660-cnoc
+              - qcom,sdm660-gnoc
+              - qcom,sdm660-snoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+
+        clocks:
+          items:
+            - description: Bus Clock
+            - description: Bus A Clock
+
+      # Child node's properties
+      patternProperties:
+        '^interconnect-[a-z0-9]+$':
+          type: object
+          description:
+            snoc-mm is a child of snoc, sharing snoc's register address space.
+
+          properties:
+            compatible:
+              enum:
+                - qcom,msm8939-snoc-mm
+
+            '#interconnect-cells':
+              const: 1
+
+            clock-names:
+              items:
+                - const: bus
+                - const: bus_a
+
+            clocks:
+              items:
+                - description: Bus Clock
+                - description: Bus A Clock
+
+          required:
+            - compatible
+            - '#interconnect-cells'
+            - clock-names
+            - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-mnoc
+              - qcom,sdm660-mnoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: iface
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: CPU-NoC High-performance Bus Clock.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+
 examples:
   - |
       #include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
new file mode 100644
index 000000000000..bbeb0541536b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  '#interconnect-cells':
+    enum: [ 1, 2 ]
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    maxItems: 2
+    description:
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    maxItems: 2
+    description:
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 3fd1a134162d..a429a1ed1006 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -18,6 +18,9 @@ description: |
    least one RPMh device child node pertaining to their RSC and each provider
    can map to multiple RPMh resources.
 
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
 properties:
   reg:
     maxItems: 1
@@ -31,7 +34,6 @@ properties:
       - qcom,sc7180-config-noc
       - qcom,sc7180-dc-noc
       - qcom,sc7180-gem-noc
-      - qcom,sc7180-ipa-virt
       - qcom,sc7180-mc-virt
       - qcom,sc7180-mmss-noc
       - qcom,sc7180-npu-noc
@@ -59,7 +61,20 @@ properties:
       - qcom,sc8180x-ipa-virt
       - qcom,sc8180x-mc-virt
       - qcom,sc8180x-mmss-noc
+      - qcom,sc8180x-qup-virt
       - qcom,sc8180x-system-noc
+      - qcom,sc8280xp-aggre1-noc
+      - qcom,sc8280xp-aggre2-noc
+      - qcom,sc8280xp-clk-virt
+      - qcom,sc8280xp-config-noc
+      - qcom,sc8280xp-dc-noc
+      - qcom,sc8280xp-gem-noc
+      - qcom,sc8280xp-lpass-ag-noc
+      - qcom,sc8280xp-mc-virt
+      - qcom,sc8280xp-mmss-noc
+      - qcom,sc8280xp-nspa-noc
+      - qcom,sc8280xp-nspb-noc
+      - qcom,sc8280xp-system-noc
       - qcom,sdm845-aggre1-noc
       - qcom,sdm845-aggre2-noc
       - qcom,sdm845-config-noc
@@ -68,10 +83,12 @@ properties:
       - qcom,sdm845-mem-noc
       - qcom,sdm845-mmss-noc
       - qcom,sdm845-system-noc
-      - qcom,sdx55-ipa-virt
       - qcom,sdx55-mc-virt
       - qcom,sdx55-mem-noc
       - qcom,sdx55-system-noc
+      - qcom,sdx65-mc-virt
+      - qcom,sdx65-mem-noc
+      - qcom,sdx65-system-noc
       - qcom,sm8150-aggre1-noc
       - qcom,sm8150-aggre2-noc
       - qcom,sm8150-camnoc-noc
@@ -104,27 +121,25 @@ properties:
       - qcom,sm8350-mmss-noc
       - qcom,sm8350-compute-noc
       - qcom,sm8350-system-noc
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
 
-  '#interconnect-cells':
-    enum: [ 1, 2 ]
-
-  qcom,bcm-voters:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      List of phandles to qcom,bcm-voter nodes that are required by
-      this interconnect to send RPMh commands.
-
-  qcom,bcm-voter-names:
-    description: |
-      Names for each of the qcom,bcm-voters specified.
+  '#interconnect-cells': true
 
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - qcom,bcm-voters
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
deleted file mode 100644
index bcd41e491f1d..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
+++ /dev/null
@@ -1,185 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SDM660 Network-On-Chip interconnect
-
-maintainers:
-  - AngeloGioacchino Del Regno <kholk11@gmail.com>
-
-description: |
-  The Qualcomm SDM660 interconnect providers support adjusting the
-  bandwidth requirements between the various NoC fabrics.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,sdm660-a2noc
-      - qcom,sdm660-bimc
-      - qcom,sdm660-cnoc
-      - qcom,sdm660-gnoc
-      - qcom,sdm660-mnoc
-      - qcom,sdm660-snoc
-
-  '#interconnect-cells':
-    const: 1
-
-  clocks:
-    minItems: 1
-    maxItems: 7
-
-  clock-names:
-    minItems: 1
-    maxItems: 7
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-mnoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: CPU-NoC High-performance Bus Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: iface
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-a2noc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: IPA Clock.
-            - description: UFS AXI Clock.
-            - description: Aggregate2 UFS AXI Clock.
-            - description: Aggregate2 USB3 AXI Clock.
-            - description: Config NoC USB2 AXI Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: ipa
-            - const: ufs_axi
-            - const: aggre2_ufs_axi
-            - const: aggre2_usb3_axi
-            - const: cfg_noc_usb2_axi
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-bimc
-              - qcom,sdm660-cnoc
-              - qcom,sdm660-gnoc
-              - qcom,sdm660-snoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-
-examples:
-  - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-      #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
-      #include <dt-bindings/clock/qcom,gcc-sdm660.h>
-
-      bimc: interconnect@1008000 {
-              compatible = "qcom,sdm660-bimc";
-              reg = <0x01008000 0x78000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      cnoc: interconnect@1500000 {
-              compatible = "qcom,sdm660-cnoc";
-              reg = <0x01500000 0x10000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-                       <&rpmcc RPM_SMD_CNOC_A_CLK>;
-      };
-
-      snoc: interconnect@1626000 {
-              compatible = "qcom,sdm660-snoc";
-              reg = <0x01626000 0x7090>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
-
-      a2noc: interconnect@1704000 {
-              compatible = "qcom,sdm660-a2noc";
-              reg = <0x01704000 0xc100>;
-              #interconnect-cells = <1>;
-              clock-names = "bus",
-                            "bus_a",
-                            "ipa",
-                            "ufs_axi",
-                            "aggre2_ufs_axi",
-                            "aggre2_usb3_axi",
-                            "cfg_noc_usb2_axi";
-              clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-                       <&rpmcc RPM_SMD_IPA_CLK>,
-                       <&gcc GCC_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-                       <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
-      };
-
-      mnoc: interconnect@1745000 {
-              compatible = "qcom,sdm660-mnoc";
-              reg = <0x01745000 0xa010>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a", "iface";
-              clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-                       <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-                       <&mmcc AHB_CLK_SRC>;
-      };
-
-      gnoc: interconnect@17900000 {
-              compatible = "qcom,sdm660-gnoc";
-              reg = <0x17900000 0xe000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&xo_board>, <&xo_board>;
-      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
new file mode 100644
index 000000000000..49eb156b08e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  Qualcomm RPMh-based interconnect provider on SM6350.
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6350-aggre1-noc
+      - qcom,sm6350-aggre2-noc
+      - qcom,sm6350-config-noc
+      - qcom,sm6350-dc-noc
+      - qcom,sm6350-gem-noc
+      - qcom,sm6350-mmss-noc
+      - qcom,sm6350-npu-noc
+      - qcom,sm6350-system-noc
+
+  reg:
+    maxItems: 1
+
+  '#interconnect-cells': true
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+    $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6350-clk-virt
+          - qcom,sm6350-compute-noc
+
+      '#interconnect-cells': true
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    config_noc: interconnect@1500000 {
+        compatible = "qcom,sm6350-config-noc";
+        reg = <0x01500000 0x28000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm6350-system-noc";
+        reg = <0x01620000 0x17080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        clk_virt: interconnect-clk-virt {
+            compatible = "qcom,sm6350-clk-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
new file mode 100644
index 000000000000..ad9ed596dfef
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
@@ -0,0 +1,290 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Bus and Interconnect
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has many buses for data transfer between DRAM and
+  sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
+  Generally, each bus of Exynos SoC includes a source clock and a power line,
+  which are able to change the clock frequency of the bus in runtime. To
+  monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
+  Performance Monitoring Unit), which is able to measure the current load of
+  sub-blocks.
+
+  The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+  The each AXI bus has the owned source clock but, has not the only owned power
+  line. The power line might be shared among one more sub-blocks.  So, we can
+  divide into two type of device as the role of each sub-block.  There are two
+  type of bus devices as following::
+   - parent bus device
+   - passive bus device
+
+  Basically, parent and passive bus device share the same power line.  The
+  parent bus device can only change the voltage of shared power line and the
+  rest bus devices (passive bus device) depend on the decision of the parent
+  bus device. If there are three blocks which share the VDD_xxx power line,
+  Only one block should be parent device and then the rest blocks should depend
+  on the parent device as passive device.
+
+    VDD_xxx |--- A block (parent)
+      |--- B block (passive)
+      |--- C block (passive)
+
+  There are a little different composition among Exynos SoC because each Exynos
+  SoC has different sub-blocks. Therefore, such difference should be specified
+  in devicetree file instead of each device driver. In result, this driver is
+  able to support the bus frequency for all Exynos SoCs.
+
+  Detailed correlation between sub-blocks and power line according
+  to Exynos SoC::
+   - In case of Exynos3250, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC
+       |--- G3D
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- FSYS
+       |--- LCD0
+       |--- PERIR
+       |--- ISP
+       |--- CAM
+
+     - MIF bus's frequency/voltage table
+       -----------------------
+       |Lv| Freq   | Voltage |
+       -----------------------
+       |L1| 50000  |800000   |
+       |L2| 100000 |800000   |
+       |L3| 134000 |800000   |
+       |L4| 200000 |825000   |
+       |L5| 400000 |875000   |
+       -----------------------
+
+     - INT bus's frequency/voltage table
+       ----------------------------------------------------------
+       |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
+       | name|       |LCD0    |       |       |       ||        |
+       |     |       |FSYS    |       |       |       ||        |
+       |     |       |MFC     |       |       |       ||        |
+       ----------------------------------------------------------
+       |Mode |*parent|passive |passive|passive|passive||        |
+       ----------------------------------------------------------
+       |Lv   |Frequency                               ||Voltage |
+       ----------------------------------------------------------
+       |L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
+       |L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
+       |L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
+       |L4   |134000 |134000  |200000 |200000 |       ||1000000 |
+       |L5   |200000 |200000  |400000 |300000 |       ||1000000 |
+       ----------------------------------------------------------
+
+   - In case of Exynos4210, there is one power line as following::
+     VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
+       |--- LEFTBUS
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- LCD0
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- LCD1
+
+   - In case of Exynos4x12, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- IMAGE
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- ISP
+
+   - In case of Exynos5422, there are two power line as following::
+     VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+             |--- DREX 1
+
+     VDD_INT |--- NoC_Core (parent device)
+       |--- G2D
+       |--- G3D
+       |--- DISP1
+       |--- NoC_WCORE
+       |--- GSCL
+       |--- MSCL
+       |--- ISP
+       |--- MFC
+       |--- GEN
+       |--- PERIS
+       |--- PERIC
+       |--- FSYS
+       |--- FSYS2
+
+   - In case of Exynos5433, there is VDD_INT power line as following::
+     VDD_INT |--- G2D (parent device)
+       |--- MSCL
+       |--- GSCL
+       |--- JPEG
+       |--- MFC
+       |--- HEVC
+       |--- BUS0
+       |--- BUS1
+       |--- BUS2
+       |--- PERIS (Fixed clock rate)
+       |--- PERIC (Fixed clock rate)
+       |--- FSYS  (Fixed clock rate)
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-bus
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bus
+
+  devfreq:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Parent bus device. Valid and required only for the passive bus devices.
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description:
+      Devfreq-event device to monitor the current utilization of buses. Valid
+      and required only for the parent bus devices.
+
+  exynos,saturation-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Percentage value which is used to calibrate the performance count against
+      total cycle count.  Valid only for the parent bus devices.
+
+  '#interconnect-cells':
+    const: 0
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+
+  samsung,data-clock-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Ratio of the data throughput in B/s to minimum data clock frequency in
+      Hz.
+
+  vdd-supply:
+    description:
+      Main bus power rail. Valid and required only for the parent bus devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu_dmc CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+        };
+    };
+
+    bus_leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    bus-rightbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDR>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq = <&bus_leftbus>;
+    };
+
+  - |
+    dmc: bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        samsung,data-clock-ratio = <4>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        interconnects = <&dmc>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    display: bus-display {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_ACLK_266>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_display_opp_table>;
+        interconnects = <&leftbus &dmc>;
+        #interconnect-cells = <0>;
+        devfreq = <&leftbus>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
index 953d875b5e74..a713633be733 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Interrupt Controller Device Tree Bindings
+title: Allwinner A10 Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
index 4db24b8a9ffe..4fa6fd400eef 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 NMI/Wakeup Interrupt Controller Device Tree Bindings
+title: Allwinner A31 NMI/Wakeup Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 7fc9ad5ef38c..83603180d8d9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings
+title: Allwinner A20 Non-Maskable Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 23b18b92c558..bde63f8f090e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -18,6 +18,7 @@ Required properties:
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
     "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
+    "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt b/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
deleted file mode 100644
index f4b4193d830e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Andestech Internal Vector Interrupt Controller
-
-The Internal Vector Interrupt Controller (IVIC) is a basic interrupt controller
-suitable for a simpler SoC platform not requiring a more sophisticated and
-bigger External Vector Interrupt Controller.
-
-
-Main node required properties:
-
-- compatible : should at least contain  "andestech,ativic32".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells: 1 cells and refer to interrupt-controller/interrupts
-
-Examples:
-	intc: interrupt-controller {
-		compatible = "andestech,ativic32";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
index 97359024709a..e18107eafe7c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
@@ -56,6 +56,8 @@ properties:
           - 1: virtual HV timer
           - 2: physical guest timer
           - 3: virtual guest timer
+          - 4: 'efficient' CPU PMU
+          - 5: 'performance' CPU PMU
 
       The 3rd cell contains the interrupt flags. This is normally
       IRQ_TYPE_LEVEL_HIGH (4).
@@ -68,6 +70,35 @@ properties:
   power-domains:
     maxItems: 1
 
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
 required:
   - compatible
   - '#interrupt-cells'
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
new file mode 100644
index 000000000000..47a78a167aba
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller 2
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller 2 is a simple interrupt controller present on
+  Apple ARM SoC platforms starting with t600x (M1 Pro and Max).
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Support for multiple dies
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller. It also handles
+  FIQ-based Fast IPIs.
+
+properties:
+  compatible:
+    items:
+      - const: apple,t6000-aic
+      - const: apple,aic2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 4
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the die ID.
+
+      The next cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+
+      The last cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    items:
+      - description: Address and size of the main AIC2 registers.
+      - description: Address and size of the AIC2 Event register.
+
+  reg-names:
+    items:
+      - const: core
+      - const: event
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@28e100000 {
+            compatible = "apple,t6000-aic", "apple,aic2";
+            #interrupt-cells = <4>;
+            interrupt-controller;
+            reg = <0x2 0x8e100000 0x0 0xc000>,
+                  <0x2 0x8e10c000 0x0 0x4>;
+            reg-names = "core", "event";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index c84f9fe7f254..9f7d3e11aacb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Generic Interrupt Controller, version 3
 
 maintainers:
-  - Marc Zyngier <marc.zyngier@arm.com>
+  - Marc Zyngier <maz@kernel.org>
 
 description: |
   AArch64 SMP cores are often associated with a GICv3, providing Private
@@ -78,7 +78,11 @@ properties:
       - GIC Hypervisor interface (GICH)
       - GIC Virtual CPU interface (GICV)
 
-      GICC, GICH and GICV are optional.
+      GICC, GICH and GICV are optional, but must be described if the CPUs
+      support them. Examples of such CPUs are ARM's implementations of the
+      ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+      A73 (this list is not exhaustive).
+
     minItems: 2
     maxItems: 4096   # Should be enough?
 
@@ -138,6 +142,8 @@ properties:
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).
@@ -164,7 +170,6 @@ dependencies:
 
 required:
   - compatible
-  - interrupts
   - reg
 
 patternProperties:
@@ -239,6 +244,7 @@ examples:
       };
     };
 
+  - |
     interrupt-controller@2c010000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <4>;
@@ -254,7 +260,7 @@ examples:
             <0x2c040000 0x2000>,  // GICC
             <0x2c060000 0x2000>,  // GICH
             <0x2c080000 0x2000>;  // GICV
-      interrupts = <1 9 4>;
+      interrupts = <1 9 4 0>;
 
       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
@@ -272,11 +278,11 @@ examples:
 
       ppi-partitions {
         part0: interrupt-partition-0 {
-          affinity = <&cpu0 &cpu2>;
+          affinity = <&cpu0>, <&cpu2>;
         };
 
         part1: interrupt-partition-1 {
-          affinity = <&cpu1 &cpu3>;
+          affinity = <&cpu1>, <&cpu3>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index ba282f4c9fd0..220256907461 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -58,14 +58,15 @@ properties:
               - enum:
                   - nvidia,tegra186-agic
                   - nvidia,tegra194-agic
+                  - nvidia,tegra234-agic
               - const: nvidia,tegra210-agic
 
   interrupt-controller: true
 
   "#address-cells":
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
   "#size-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   "#interrupt-cells":
     const: 3
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d5430..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-	compatible = "brcm,bcm3380-l2-intc";
-	reg = <0x10000024 0x4 0x1000002c 0x4>,
-	      <0x10000020 0x4 0x10000028 0x4>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
deleted file mode 100644
index 5ddef1dc0c1a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Broadcom BCM7038-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
-since BCM7038 has contained this hardware.
-
-Key elements of the hardware design include:
-
-- 64, 96, 128, or 160 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Atomic mask/unmask operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-5 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm7038-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Optional properties:
-
-- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
-  have already been configured by the firmware and should be left unmanaged.
-  This should have one 32-bit word per status/set/clear/mask group.
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-Example:
-
-periph_intc: periph_intc@1041a400 {
-        compatible = "brcm,bcm7038-l1-intc";
-        reg = <0x1041a400 0x30 0x1041a600 0x30>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 000000000000..5ecb6faa70dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
+  since BCM7038 has contained this hardware.
+
+  Key elements of the hardware design include:
+
+   - 64, 96, 128, or 160 incoming level IRQ lines
+
+   - Most onchip peripherals are wired directly to an L1 input
+
+   - A separate instance of the register set for each CPU, allowing individual
+     peripheral IRQs to be routed to any CPU
+
+   - Atomic mask/unmask operations
+
+   - No polarity/level/edge settings
+
+   - No FIFO or priority encoder logic; software is expected to read all
+     2-5 status words to determine which IRQs are pending
+
+   If multiple reg ranges and interrupt-parent entries are present on an SMP
+   system, the driver will allow IRQ SMP affinity to be set up through the
+   /proc/irq/ interface.  In the simplest possible configuration, only one
+   reg range and one interrupt-parent is needed.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-l1-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+      the number of supported IRQs is inferred from the size argument
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: >
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L1 controller can be used as a
+      wakeup source for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      If present, a bit mask to indicate which interrupts have already been
+      configured by the firmware and should be left unmanaged. This should
+      have one 32-bit word per status/set/clear/mask group.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_intc: interrupt-controller@1041a400 {
+      compatible = "brcm,bcm7038-l1-intc";
+      reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&cpu_intc>;
+      interrupts = <2>, <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
deleted file mode 100644
index addd86b6ca2f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Broadcom BCM7120-style Level 2 interrupt controller
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. It can be found on BCM7xxx products starting with BCM7120.
-
-Such an interrupt controller has the following hardware design:
-
-- outputs multiple interrupts signals towards its interrupt controller parent
-
-- controls how some of the interrupts will be flowing, whether they will
-  directly output an interrupt signal towards the interrupt controller parent,
-  or if they will output an interrupt signal at this 2nd level interrupt
-  controller, in particular for UARTs
-
-- has one 32-bit enable word and one 32-bit status word
-
-- no atomic set/clear operations
-
-- not all bits within the interrupt controller actually map to an interrupt
-
-The typical hardware layout for this controller is represented below:
-
-2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
-
-0 -----[ MUX ] ------------|==========> GIC interrupt 75
-          \-----------\
-                       |
-1 -----[ MUX ] --------)---|==========> GIC interrupt 76
-          \------------|
-                       |
-2 -----[ MUX ] --------)---|==========> GIC interrupt 77
-          \------------|
-                       |
-3 ---------------------|
-4 ---------------------|
-5 ---------------------|
-7 ---------------------|---|===========> GIC interrupt 66
-9 ---------------------|
-10 --------------------|
-11 --------------------/
-
-6 ------------------------\
-                           |===========> GIC interrupt 64
-8 ------------------------/
-
-12 ........................ X
-13 ........................ X 		(not connected)
-..
-31 ........................ X
-
-Required properties:
-
-- compatible: should be "brcm,bcm7120-l2-intc"
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
-  are wired to this 2nd level interrupt controller, and how they match their
-  respective interrupt parents. Should match exactly the number of interrupts
-  specified in the 'interrupts' property.
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
-  have a mux gate, typically UARTs. Setting these bits will make their
-  respective interrupt outputs bypass this 2nd level interrupt controller
-  completely; it is completely transparent for the interrupt controller
-  parent. This should have one 32-bit word per enable/status pair.
-
-Example:
-
-irq0_intc: interrupt-controller@f0406800 {
-	compatible = "brcm,bcm7120-l2-intc";
-	interrupt-parent = <&intc>;
-	#interrupt-cells = <1>;
-	reg = <0xf0406800 0x8>;
-	interrupt-controller;
-	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
-	brcm,int-map-mask = <0xeb8>, <0x140>;
-	brcm,int-fwd-mask = <0x7>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 000000000000..46b2eb3c43ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X           (not connected)
+  ..
+  31 ........................ X
+
+  The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
+
+  reg:
+    minItems: 1
+    maxItems: 4
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  brcm,int-map-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+      compatible = "brcm,bcm7120-l2-intc";
+      interrupt-parent = <&intc>;
+      #interrupt-cells = <1>;
+      reg = <0xf0406800 0x8>;
+      interrupt-controller;
+      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+      brcm,int-map-mask = <0xeb8>, <0x140>;
+      brcm,int-fwd-mask = <0x7>;
+    };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
deleted file mode 100644
index 021cf822395c..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Generic Level 2 Interrupt Controller
-
-Required properties:
-
-- compatible: should be one of:
-	      "brcm,hif-spi-l2-intc" or
-	      "brcm,upg-aux-aon-l2-intc" or
-	      "brcm,l2-intc" for latched interrupt controllers
-              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent irq space
-  to be used for cascading
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-hif_intr2_intc: interrupt-controller@f0441000 {
-	compatible = "brcm,l2-intc";
-	reg = <0xf0441000 0x30>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&intc>;
-	interrupts = <0x0 0x20 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 000000000000..8961afca96f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,hif-spi-l2-intc
+              - brcm,upg-aux-aon-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - enum:
+              - brcm,bcm2711-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - const: brcm,bcm7271-l2-intc
+      - items:
+          - const: brcm,l2-intc
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    hif_intr2_intc: interrupt-controller@f0441000 {
+      compatible = "brcm,l2-intc";
+      reg = <0xf0441000 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&intc>;
+      interrupts = <0x0 0x20 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index 4d47df1a5c91..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
-LS1088A, LS208xA, LX216xA) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
-  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
-  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
-- #interrupt-cells: Must be 2. The first element is the index of the
-  external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG or the External Interrupt Control Register (IRQCR) in
-  the ISC.
-- interrupt-map: Specifies the mapping from external interrupts to GIC
-  interrupts.
-- interrupt-map-mask: Must be <0xffffffff 0>.
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg", "syscon";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-		big-endian;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x1570000 0x10000>;
-
-		extirq: interrupt-controller@1ac {
-			compatible = "fsl,ls1021a-extirq";
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1ac 4>;
-			interrupt-map =
-				<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-map-mask = <0xffffffff 0x0>;
-		};
-	};
-
-
-	interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-			      <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..887e565b9573
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+  LX216xA) support inverting the polarity of certain external interrupt
+  lines.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,ls1021a-extirq
+          - fsl,ls1043a-extirq
+          - fsl,ls1088a-extirq
+      - items:
+          - enum:
+              - fsl,ls1046a-extirq
+          - const: fsl,ls1043a-extirq
+      - items:
+          - enum:
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+          - const: fsl,ls1088a-extirq
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the Interrupt Polarity Control Register (INTPCR) in the
+      SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+  interrupt-map:
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1021a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 6
+          maxItems: 6
+        interrupt-map-mask:
+          items:
+            - const: 0x7
+            - const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1043a-extirq
+              - fsl,ls1046a-extirq
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 12
+          maxItems: 12
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    interrupt-controller@1ac {
+            compatible = "fsl,ls1021a-extirq";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0x1ac 4>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <0x7 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 000000000000..799ae5c3e32a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        interrupt-controller;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
index 160ff4b07cac..afb3dd80b643 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IDT 79RC32434 Interrupt Controller Device Tree Bindings
+title: IDT 79RC32434 Interrupt Controller
 
 maintainers:
   - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
index 372ccbfae771..5a583bf3dbc1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
@@ -7,10 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Marvell MMP/Orion Interrupt controller bindings
 
 maintainers:
-  - Thomas Gleixner <tglx@linutronix.de>
-  - Jason Cooper <jason@lakedaemon.net>
-  - Marc Zyngier <maz@kernel.org>
-  - Rob Herring <robh+dt@kernel.org>
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
 
 allOf:
   - if:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
new file mode 100644
index 000000000000..46a1f5f54b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPU Interrupt Controller
+
+description: >
+   On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
+   IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+   With the irq_domain in place we can describe how the 8 IRQs are wired to the
+   platforms internal interrupt controller cascade.
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: mti,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "mti,cpu-interrupt-controller";
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 000000000000..509d20c091af
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+  MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+  resources during sleep, the hardware also has an interrupt controller that
+  monitors the interrupts when the system is asleep, wakes up the APSS when
+  one of these interrupts occur and replays it to GIC interrupt controller
+  after GIC becomes operational.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,mpm
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specify the IRQ used by RPM to wakeup APSS.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Specify the mailbox used to notify RPM for writing vMPM registers.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the MPM pin number for the interrupt, and the second
+      is the trigger type.
+
+  qcom,mpm-pin-count:
+    description:
+      Specify the total MPM pin count that a SoC supports.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,mpm-pin-map:
+    description:
+      A set of MPM pin numbers and the corresponding GIC SPIs.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: MPM pin number
+        - description: GIC SPI number for the MPM pin
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - interrupt-controller
+  - '#interrupt-cells'
+  - qcom,mpm-pin-count
+  - qcom,mpm-pin-map
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mpm: interrupt-controller@45f01b8 {
+        compatible = "qcom,mpm";
+        interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+        reg = <0x45f01b8 0x1000>;
+        mboxes = <&apcs_glb 1>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        qcom,mpm-pin-count = <96>;
+        qcom,mpm-pin-map = <2 275>,
+                           <5 296>,
+                           <12 422>,
+                           <24 79>,
+                           <86 183>,
+                           <90 260>,
+                           <91 260>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
deleted file mode 100644
index 98d89e53013d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-PDC interrupt controller
-
-Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
-Power Domain Controller (PDC) that is on always-on domain. In addition to
-providing power control for the power domains, the hardware also has an
-interrupt controller that can be used to help detect edge low interrupts as
-well detect interrupts when the GIC is non-operational.
-
-GIC is parent interrupt controller at the highest level. Platform interrupt
-controller PDC is next in hierarchy, followed by others. Drivers requiring
-wakeup capabilities of their device interrupts routed through the PDC, must
-specify PDC as their interrupt controller and request the PDC port associated
-with the GIC interrupt. See example below.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc"
-		    - "qcom,sc7180-pdc": For SC7180
-		    - "qcom,sc7280-pdc": For SC7280
-		    - "qcom,sdm845-pdc": For SDM845
-		    - "qcom,sdm8250-pdc": For SM8250
-		    - "qcom,sdm8350-pdc": For SM8350
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Specifies the base physical address for PDC hardware.
-
-- interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Specifies the number of cells needed to encode an interrupt
-		    source.
-		    Must be 2.
-		    The first element of the tuple is the PDC pin for the
-		    interrupt.
-		    The second element is the trigger type.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <bool>
-	Definition: Identifies the node as an interrupt controller.
-
-- qcom,pdc-ranges:
-	Usage: required
-	Value type: <u32 array>
-	Definition: Specifies the PDC pin offset and the number of PDC ports.
-		    The tuples indicates the valid mapping of valid PDC ports
-		    and their hwirq mapping.
-		    The first element of the tuple is the starting PDC port.
-		    The second element is the GIC hwirq number for the PDC port.
-		    The third element is the number of interrupts in sequence.
-
-Example:
-
-	pdc: interrupt-controller@b220000 {
-		compatible = "qcom,sdm845-pdc";
-		reg = <0xb220000 0x30000>;
-		qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&intc>;
-		interrupt-controller;
-	};
-
-DT binding of a device that wants to use the GIC SPI 514 as a wakeup
-interrupt, must do -
-
-	wake-device {
-		interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-In this case interrupt 514 would be mapped to port 2 on the PDC as defined by
-the qcom,pdc-ranges property.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
new file mode 100644
index 000000000000..b6f56cf5fbe3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDC interrupt controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
+  Power Domain Controller (PDC) that is on always-on domain. In addition to
+  providing power control for the power domains, the hardware also has an
+  interrupt controller that can be used to help detect edge low interrupts as
+  well detect interrupts when the GIC is non-operational.
+
+  GIC is parent interrupt controller at the highest level. Platform interrupt
+  controller PDC is next in hierarchy, followed by others. Drivers requiring
+  wakeup capabilities of their device interrupts routed through the PDC, must
+  specify PDC as their interrupt controller and request the PDC port associated
+  with the GIC interrupt. See example below.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7180-pdc
+          - qcom,sc7280-pdc
+          - qcom,sdm845-pdc
+          - qcom,sm6350-pdc
+          - qcom,sm8150-pdc
+          - qcom,sm8250-pdc
+          - qcom,sm8350-pdc
+      - const: qcom,pdc
+
+  reg:
+    minItems: 1
+    items:
+      - description: PDC base register region
+      - description: Edge or Level config register for SPI interrupts
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  qcom,pdc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 32 # no hard limit
+    items:
+      items:
+        - description: starting PDC port
+        - description: GIC hwirq number for the PDC port
+        - description: number of interrupts in sequence
+    description: |
+      Specifies the PDC pin offset and the number of PDC ports.
+      The tuples indicates the valid mapping of valid PDC ports
+      and their hwirq mapping.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - qcom,pdc-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pdc: interrupt-controller@b220000 {
+        compatible = "qcom,sdm845-pdc", "qcom,pdc";
+        reg = <0xb220000 0x30000>;
+        qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+    };
+
+    wake-device {
+        interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
deleted file mode 100644
index e0062aebf025..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-RDA Micro RDA8810PL Interrupt Controller
-
-The interrupt controller in RDA8810PL SoC is a custom interrupt controller
-which supports up to 32 interrupts.
-
-Required properties:
-
-- compatible: Should be "rda,8810pl-intc".
-- reg: Specifies base physical address of the registers set.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-The interrupt sources are as follows:
-
-ID	Name
-------------
-0:	PULSE_DUMMY
-1:	I2C
-2:	NAND_NFSC
-3:	SDMMC1
-4:	SDMMC2
-5:	SDMMC3
-6:	SPI1
-7:	SPI2
-8:	SPI3
-9:	UART1
-10:	UART2
-11:	UART3
-12:	GPIO1
-13:	GPIO2
-14:	GPIO3
-15:	KEYPAD
-16:	TIMER
-17:	TIMEROS
-18:	COMREG0
-19:	COMREG1
-20:	USB
-21:	DMC
-22:	DMA
-23:	CAMERA
-24:	GOUDA
-25:	GPU
-26:	VPU_JPG
-27:	VPU_HOST
-28:	VOC
-29:	AUIFC0
-30:	AUIFC1
-31:	L2CC
-
-Example:
-		apb@20800000 {
-			compatible = "simple-bus";
-			...
-			intc: interrupt-controller@0 {
-				compatible = "rda,8810pl-intc";
-				reg = <0x0 0x1000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
new file mode 100644
index 000000000000..96d6285d0087
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@0 {
+      compatible = "rda,8810pl-intc";
+      reg = <0x0 0x1000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
index 9e76fff20323..13a893b18fb6 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -6,6 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Realtek RTL SoC interrupt controller devicetree bindings
 
+description:
+  Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+  interrupt to be routed to one parent CPU (hardware) interrupt, or left
+  disconnected.
+  All connected input lines from SoC peripherals can be masked individually,
+  and an interrupt status register is present to indicate which interrupts are
+  pending.
+
 maintainers:
   - Birger Koblitz <mail@birger-koblitz.de>
   - Bert Vermeulen <bert@biot.com>
@@ -13,23 +21,33 @@ maintainers:
 
 properties:
   compatible:
-    const: realtek,rtl-intc
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl8380-intc
+          - const: realtek,rtl-intc
+      - const: realtek,rtl-intc
+        deprecated: true
 
   "#interrupt-cells":
+    description:
+      SoC interrupt line index.
     const: 1
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 15
+    description:
+      List of parent interrupts, in the order that they are connected to this
+      interrupt router's outputs, starting at the first output.
 
   interrupt-controller: true
 
-  "#address-cells":
-    const: 0
-
   interrupt-map:
+    deprecated: true
     description: Describes mapping from SoC interrupts to CPU interrupts
 
 required:
@@ -37,21 +55,33 @@ required:
   - reg
   - "#interrupt-cells"
   - interrupt-controller
-  - "#address-cells"
-  - interrupt-map
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: realtek,rtl-intc
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+      required:
+        - "#address-cells"
+        - interrupt-map
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 
 examples:
   - |
-    intc: interrupt-controller@3000 {
-      compatible = "realtek,rtl-intc";
+    interrupt-controller@3000 {
+      compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
       #interrupt-cells = <1>;
       interrupt-controller;
-      reg = <0x3000 0x20>;
-      #address-cells = <0>;
-      interrupt-map =
-              <31 &cpuintc 2>,
-              <30 &cpuintc 1>,
-              <29 &cpuintc 5>;
+      reg = <0x3000 0x18>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>, <4>, <5>, <6>;
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
deleted file mode 100644
index 56e8d82aff34..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8/300H Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fee012 {
-		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfee012 7>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
deleted file mode 100644
index faded2b1559b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8S Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
index 79d0358e2f61..62fd47c88275 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -36,6 +36,8 @@ properties:
           - renesas,intc-ex-r8a77980    # R-Car V3H
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
+          - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779g0    # R-Car V4H
       - const: renesas,irqc
 
   '#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 000000000000..33b90e975e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
+          - renesas,r9a07g054-irqc    # RZ/V2L
+      - const: renesas,rzg2l-irqc
+
+  '#interrupt-cells':
+    description: The first cell should contain external interrupt number (IRQ0-7) and the
+                 second cell is used to specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 41
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+            reg = <0x110a0000 0x10000>;
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                     <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+            clock-names = "clk", "pclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_IA55_RESETN>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
index d631b7589d50..72456a07dac9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung Exynos SoC Interrupt Combiner Controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Samsung's Exynos4 architecture includes a interrupt combiner controller which
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 28b6b17fe4b2..99e01f4d0a69 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -26,15 +26,24 @@ description:
   with priority below this threshold will not cause the PLIC to raise its
   interrupt line leading to the context.
 
-  While the PLIC supports both edge-triggered and level-triggered interrupts,
-  interrupt handlers are oblivious to this distinction and therefore it is not
-  specified in the PLIC device-tree binding.
+  The PLIC supports both edge-triggered and level-triggered interrupts. For
+  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+  seen while an interrupt handler is active; the PLIC may either queue them or
+  ignore them. In the first case, handlers are oblivious to the trigger type, so
+  it is not included in the interrupt specifier. In the second case, software
+  needs to know the trigger type, so it can reorder the interrupt flow to avoid
+  missing interrupts. This special handling is needed by at least the Renesas
+  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
 
   While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
   "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
   contains a specific memory layout, which is documented in chapter 8 of the
   SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
 
+  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+  T-HEAD PLIC implementation requires setting a delegation bit to allow access
+  from S-mode. So add thead,c900-plic to distinguish them.
+
 maintainers:
   - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
@@ -42,12 +51,26 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-plic
-          - starfive,jh7100-plic
-          - canaan,k210-plic
-      - const: sifive,plic-1.0.0
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-plic
+          - const: andestech,nceplic100
+      - items:
+          - enum:
+              - sifive,fu540-c000-plic
+              - starfive,jh7100-plic
+              - canaan,k210-plic
+          - const: sifive,plic-1.0.0
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-plic
+          - const: thead,c900-plic
+      - items:
+          - const: sifive,plic-1.0.0
+          - const: riscv,plic0
+        deprecated: true
+        description: For the QEMU virt machine only
 
   reg:
     maxItems: 1
@@ -55,13 +78,13 @@ properties:
   '#address-cells':
     const: 0
 
-  '#interrupt-cells':
-    const: 1
+  '#interrupt-cells': true
 
   interrupt-controller: true
 
   interrupts-extended:
     minItems: 1
+    maxItems: 15872
     description:
       Specifies which contexts are connected to the PLIC, with "-1" specifying
       that a context is not present. Each node pointed to should be a
@@ -72,6 +95,12 @@ properties:
     description:
       Specifies how many external interrupts are supported by this controller.
 
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
 required:
   - compatible
   - '#address-cells'
@@ -81,6 +110,47 @@ required:
   - interrupts-extended
   - riscv,ndev
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - andestech,nceplic100
+              - thead,c900-plic
+
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 2
+
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+        - power-domains
+        - resets
+
 additionalProperties: false
 
 examples:
@@ -90,12 +160,11 @@ examples:
       #interrupt-cells = <1>;
       compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
       interrupt-controller;
-      interrupts-extended = <
-        &cpu0_intc 11
-        &cpu1_intc 11 &cpu1_intc 9
-        &cpu2_intc 11 &cpu2_intc 9
-        &cpu3_intc 11 &cpu3_intc 9
-        &cpu4_intc 11 &cpu4_intc 9>;
+      interrupts-extended = <&cpu0_intc 11>,
+                            <&cpu1_intc 11>, <&cpu1_intc 9>,
+                            <&cpu2_intc 11>, <&cpu2_intc 9>,
+                            <&cpu3_intc 11>, <&cpu3_intc 9>,
+                            <&cpu4_intc 11>, <&cpu4_intc 9>;
       reg = <0xc000000 0x4000000>;
       riscv,ndev = <10>;
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
index f89ebde76dab..de7c5e59bae1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -30,6 +30,7 @@ properties:
       - socionext,uniphier-ld11-aidet
       - socionext,uniphier-ld20-aidet
       - socionext,uniphier-pxs3-aidet
+      - socionext,uniphier-nx1-aidet
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index d19c881b4abc..00c10a8258f1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STM32 External Interrupt Controller Device Tree Bindings
+title: STM32 External Interrupt Controller
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
@@ -20,6 +20,7 @@ properties:
       - items:
           - enum:
               - st,stm32mp1-exti
+              - st,stm32mp13-exti
           - const: syscon
 
   "#interrupt-cells":
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 000000000000..bd0021dbab0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    items:
+      - const: sunplus,sp7021-intc
+
+  reg:
+    maxItems: 2
+    description:
+      Specifies base physical address(s) and size of the controller regs.
+      The 1st region include type/polarity/priority/mask regs.
+      The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    maxItems: 2
+    description:
+      EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+      controller.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    intc: interrupt-controller@9c000780 {
+        compatible = "sunplus,sp7021-intc";
+        reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index 3d89668573e8..1151518859bd 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -59,6 +59,9 @@ properties:
 
   interrupt-controller: true
 
+  '#interrupt-cells':
+    const: 0
+
   msi-controller: true
 
   ti,interrupt-ranges:
@@ -77,6 +80,8 @@ properties:
 
   ti,unmapped-event-sources:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to DMA controllers where the unmapped events originate.
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
index e12aee42b126..c99cc7323c71 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -58,6 +58,9 @@ properties:
         1 = If intr supports edge triggered interrupts.
         4 = If intr supports level triggered interrupts.
 
+  reg:
+    maxItems: 1
+
   interrupt-controller: true
 
   '#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
index 5e125cf2a88b..e20016f12017 100644
--- a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 IOMMU Device Tree Bindings
+title: Allwinner H6 IOMMU
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
new file mode 100644
index 000000000000..1524fa3094ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,sart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SART DMA address filter
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  Apple SART is a simple address filter for DMA transactions. Regions of
+  physical memory must be added to the SART's allow list before any
+  DMA can target these. Unlike a proper IOMMU no remapping can be done and
+  special support in the consumer driver is required since not all DMA
+  transactions of a single device are subject to SART filtering.
+
+  SART1 has first been used since at least the A11 (iPhone 8 and iPhone X)
+  and allows 36 bit of physical address space and filter entries with sizes
+  up to 24 bit.
+
+  SART2, first seen in A14 and M1, allows 36 bit of physical address space
+  and filter entry size up to 36 bit.
+
+  SART3, first seen in M1 Pro/Max, extends both the address space and filter
+  entry size to 42 bit.
+
+properties:
+  compatible:
+    enum:
+      - apple,t6000-sart
+      - apple,t8103-sart
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu@7bc50000 {
+      compatible = "apple,t8103-sart";
+      reg = <0x7bc50000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
index e87bfbcc6913..75fcf4cb52d9 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -37,12 +37,13 @@ properties:
           hardware supports just a single, combined interrupt line.
           If provided, then the combined interrupt will be used in preference to
           any others.
-      - minItems: 2
+      - minItems: 1
         items:
-          - const: eventq     # Event Queue not empty
-          - const: gerror     # Global Error activated
-          - const: priq       # PRI Queue not empty
-          - const: cmdq-sync  # CMD_SYNC complete
+          enum:
+            - eventq      # Event Queue not empty
+            - gerror      # Global Error activated
+            - cmdq-sync   # CMD_SYNC complete
+            - priq        # PRI Queue not empty
 
   '#iommu-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index f66a3effba73..9066e6df1ba1 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -37,11 +37,16 @@ properties:
               - qcom,sc7180-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
               - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
               - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
               - qcom,sm8150-smmu-500
               - qcom,sm8250-smmu-500
               - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
           - const: arm,mmu-500
       - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
         items:
@@ -60,8 +65,9 @@ properties:
           for improved performance.
         items:
           - enum:
-              - nvidia,tegra194-smmu
               - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
           - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500
@@ -155,6 +161,17 @@ properties:
   power-domains:
     maxItems: 1
 
+  nvidia,memory-controller:
+    description: |
+      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
+      The memory controller needs to be programmed with a mapping of memory
+      client IDs to ARM SMMU stream IDs.
+
+      If this property is absent, the mapping programmed by early firmware
+      will be used and it is not guaranteed that IOMMU translations will be
+      enabled for any given device.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
 required:
   - compatible
   - reg
@@ -170,13 +187,20 @@ allOf:
         compatible:
           contains:
             enum:
-              - nvidia,tegra194-smmu
               - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
     then:
       properties:
         reg:
           minItems: 1
           maxItems: 2
+
+      # The reference to the memory controller is required to ensure that the
+      # memory client to stream ID mapping can be done synchronously with the
+      # IOMMU attachment.
+      required:
+        - nvidia,memory-controller
     else:
       properties:
         reg:
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
index 0f26fe14c8e2..839e3be0bf3c 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -73,10 +73,15 @@ properties:
           - mediatek,mt2701-m4u  # generation one
           - mediatek,mt2712-m4u  # generation two
           - mediatek,mt6779-m4u  # generation two
+          - mediatek,mt6795-m4u  # generation two
           - mediatek,mt8167-m4u  # generation two
           - mediatek,mt8173-m4u  # generation two
           - mediatek,mt8183-m4u  # generation two
+          - mediatek,mt8186-iommu-mm         # generation two
           - mediatek,mt8192-m4u  # generation two
+          - mediatek,mt8195-iommu-vdo        # generation two
+          - mediatek,mt8195-iommu-vpp        # generation two
+          - mediatek,mt8195-iommu-infra      # generation two
 
       - description: mt7623 generation one
         items:
@@ -97,10 +102,16 @@ properties:
     items:
       - const: bclk
 
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the mediatek infracfg syscon
+
   mediatek,larbs:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 32
+    items:
+      maxItems: 1
     description: |
       List of phandle to the local arbiters in the current Socs.
       Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
@@ -114,10 +125,13 @@ properties:
       dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
       dt-binding/memory/mt2712-larb-port.h for mt2712,
       dt-binding/memory/mt6779-larb-port.h for mt6779,
+      dt-binding/memory/mt6795-larb-port.h for mt6795,
       dt-binding/memory/mt8167-larb-port.h for mt8167,
       dt-binding/memory/mt8173-larb-port.h for mt8173,
       dt-binding/memory/mt8183-larb-port.h for mt8183,
+      dt-binding/memory/mt8186-memory-port.h for mt8186,
       dt-binding/memory/mt8192-larb-port.h for mt8192.
+      dt-binding/memory/mt8195-memory-port.h for mt8195.
 
   power-domains:
     maxItems: 1
@@ -126,7 +140,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - mediatek,larbs
   - '#iommu-cells'
 
 allOf:
@@ -137,8 +150,12 @@ allOf:
             enum:
               - mediatek,mt2701-m4u
               - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
               - mediatek,mt8173-m4u
+              - mediatek,mt8186-iommu-mm
               - mediatek,mt8192-m4u
+              - mediatek,mt8195-iommu-vdo
+              - mediatek,mt8195-iommu-vpp
 
     then:
       required:
@@ -148,12 +165,39 @@ allOf:
       properties:
         compatible:
           enum:
+            - mediatek,mt8186-iommu-mm
             - mediatek,mt8192-m4u
+            - mediatek,mt8195-iommu-vdo
+            - mediatek,mt8195-iommu-vpp
 
     then:
       required:
         - power-domains
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+
+    then:
+      required:
+        - mediatek,infracfg
+
+  - if: # The IOMMUs don't have larbs.
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-iommu-infra
+
+    then:
+      required:
+        - mediatek,larbs
+
 additionalProperties: false
 
 examples:
@@ -167,17 +211,8 @@ examples:
             interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
             clocks = <&infracfg CLK_INFRA_M4U>;
             clock-names = "bclk";
-            mediatek,larbs = <&larb0 &larb1 &larb2
-                              &larb3 &larb4 &larb5>;
+            mediatek,infracfg = <&infracfg>;
+            mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+                             <&larb3>, <&larb4>, <&larb5>;
             #iommu-cells = <1>;
     };
-
-  - |
-    #include <dt-bindings/memory/mt8173-larb-port.h>
-
-    /* Example for a client device */
-    display {
-           compatible = "mediatek,mt8173-disp";
-           iommus = <&iommu M4U_PORT_DISP_OVL0>,
-                    <&iommu M4U_PORT_DISP_RDMA0>;
-     };
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
index ce0c715205c6..8854569ca3a6 100644
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -44,6 +44,10 @@ properties:
               - renesas,ipmmu-r8a77990 # R-Car E3
               - renesas,ipmmu-r8a77995 # R-Car D3
               - renesas,ipmmu-r8a779a0 # R-Car V3U
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a779f0 # R-Car S4-8
+          - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
 
   reg:
     maxItems: 1
@@ -66,6 +70,12 @@ properties:
 
   renesas,ipmmu-main:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to main IPMMU
+          - description: the interrupt bit number associated with the particular
+              cache IPMMU device. The interrupt bit number needs to match the main
+              IPMMU IMSSTR register. Only used by cache IPMMU instances.
     description:
       Reference to the main IPMMU phandle plus 1 cell. The cell is
       the interrupt bit number associated with the particular cache IPMMU
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index af51b91c893e..672a0beea600 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -86,16 +86,6 @@ examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
 
-    gsc_0: scaler@13e00000 {
-      compatible = "samsung,exynos5-gsc";
-      reg = <0x13e00000 0x1000>;
-      interrupts = <0 85 0>;
-      power-domains = <&pd_gsc>;
-      clocks = <&clock CLK_GSCL0>;
-      clock-names = "gscl";
-      iommus = <&sysmmu_gsc0>;
-    };
-
     sysmmu_gsc0: iommu@13e80000 {
       compatible = "samsung,exynos-sysmmu";
       reg = <0x13E80000 0x1000>;
@@ -107,4 +97,3 @@ examples:
       power-domains = <&pd_gsc>;
       #iommu-cells = <0>;
     };
-
diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 000000000000..be1539d234f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
index 93d8f8e88cf5..71bc031c4fde 100644
--- a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
@@ -36,6 +36,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of retries before a failure is declared.  Defaults to 1.
 
+  slave-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The slave i2c device.  If not present, the main device is used. This
+      lets you use two devices on the IPMB, one for master and one for slave,
+      in case you have a slave device that can only be a slave.  The slave
+      will receive messages and the master will transmit.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
index 352f5e9c759b..4fda76e63396 100644
--- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
@@ -1,12 +1,13 @@
-* Nuvoton NPCM7xx KCS (Keyboard Controller Style) IPMI interface
+* Nuvoton NPCM KCS (Keyboard Controller Style) IPMI interface
 
-The Nuvoton SOCs (NPCM7xx) are commonly used as BMCs
+The Nuvoton SOCs (NPCM) are commonly used as BMCs
 (Baseboard Management Controllers) and the KCS interface can be
 used to perform in-band IPMI communication with their host.
 
 Required properties:
 - compatible : should be one of
     "nuvoton,npcm750-kcs-bmc"
+    "nuvoton,npcm845-kcs-bmc", "nuvoton,npcm750-kcs-bmc"
 - interrupts : interrupt generated by the controller
 - kcs_chan : The KCS channel number in the controller
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
index 702ba350d869..3b60afbab68b 100644
--- a/Documentation/devicetree/bindings/leds/backlight/common.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common backlight properties
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
index 75cc569b9c55..3300451fcfd5 100644
--- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: gpio-backlight bindings
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
index 625082bf3892..0793d0adc4ec 100644
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: led-backlight bindings
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
@@ -23,6 +23,8 @@ properties:
   leds:
     description: A list of LED nodes
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
 
   brightness-levels:
     description:
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 08fe5cf8614a..3c9b4054ed9a 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI LM3630A High-Efficiency Dual-String White LED
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 000000000000..5533b6562d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits, only for MT6370/MT6371) or
+  16384 current steps (14 bits, only for MT6372) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-backlight
+      - mediatek,mt6372-backlight
+
+  default-brightness:
+    minimum: 0
+
+  max-brightness:
+    minimum: 0
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs more than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggerred.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-exponential-mode-enable:
+    description: |
+      Enable the exponential mode of backlight brightness. If this property
+      is not enabled, the default is to use linear mode.
+    type: boolean
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt6372-backlight
+
+then:
+  properties:
+    default-brightness:
+      maximum: 16384
+
+    max-brightness:
+      maximum: 16384
+
+else:
+  properties:
+    default-brightness:
+      maximum: 2048
+
+    max-brightness:
+      maximum: 2048
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index fcb8429f3088..78fbe20a1758 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: pwm-backlight bindings
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index d839e75d9788..4c15693f7a01 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -22,10 +22,12 @@ properties:
       - qcom,pmi8994-wled
       - qcom,pmi8998-wled
       - qcom,pm660l-wled
+      - qcom,pm6150l-wled
       - qcom,pm8150l-wled
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   default-brightness:
     description: |
@@ -80,7 +82,7 @@ properties:
     description: |
       kHz; switching frequency.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
             2400, 3200, 4800, 9600 ]
 
   qcom,ovp:
@@ -170,6 +172,9 @@ allOf:
 
     then:
       properties:
+        reg:
+          maxItems: 1
+
         qcom,current-boost-limit:
           enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
           default: 805
@@ -188,6 +193,9 @@ allOf:
 
     else:
       properties:
+        reg:
+          minItems: 2
+
         qcom,current-boost-limit:
           enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
           default: 970
diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
index e0ac68694b63..99e9e138fa92 100644
--- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
@@ -47,6 +47,11 @@ properties:
     minimum: 0
     maximum: 3
 
+  richtek,bled-ocp-microamp:
+    description: |
+      Backlight over current protection level.
+    enum: [900000, 1200000, 1500000, 1800000]
+
   richtek,channel-use:
     description: |
       Backlight LED channel to be used.
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 697102707703..3c14a98430e1 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -79,24 +79,27 @@ properties:
       the LED.
     $ref: /schemas/types.yaml#/definitions/string
 
-    enum:
-        # LED will act as a back-light, controlled by the framebuffer system
-      - backlight
-        # LED will turn on (but for leds-gpio see "default-state" property in
-        # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
-      - default-on
-        # LED "double" flashes at a load average based rate
-      - heartbeat
-        # LED indicates disk activity
-      - disk-activity
-        # LED indicates IDE disk activity (deprecated), in new implementations
-        # use "disk-activity"
-      - ide-disk
-        # LED flashes at a fixed, configurable rate
-      - timer
-        # LED alters the brightness for the specified duration with one software
-        # timer (requires "led-pattern" property)
-      - pattern
+    oneOf:
+      - enum:
+            # LED will act as a back-light, controlled by the framebuffer system
+          - backlight
+            # LED will turn on (but for leds-gpio see "default-state" property in
+            # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
+          - default-on
+            # LED "double" flashes at a load average based rate
+          - heartbeat
+            # LED indicates disk activity
+          - disk-activity
+            # LED indicates IDE disk activity (deprecated), in new implementations
+            # use "disk-activity"
+          - ide-disk
+            # LED flashes at a fixed, configurable rate
+          - timer
+            # LED alters the brightness for the specified duration with one software
+            # timer (requires "led-pattern" property)
+          - pattern
+        # LED is triggered by SD/MMC activity
+      - pattern: "^mmc[0-9]+$"
 
   led-pattern:
     description: |
@@ -185,9 +188,11 @@ examples:
         };
     };
 
-    led-controller@0 {
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
         compatible = "maxim,max77693-led";
-        reg = <0 0x100>;
 
         led {
             function = LED_FUNCTION_FLASH;
@@ -199,6 +204,9 @@ examples:
         };
     };
 
+  - |
+    #include <dt-bindings/leds/common.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index c7ed2871da06..14bebe1ad8f8 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -32,8 +32,9 @@ properties:
 patternProperties:
   "^multi-led@[0-9a-b]$":
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     description:
       This node represents one of the RGB LED devices on Turris Omnia.
       No subnodes need to be added for subchannels since this controller only
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
new file mode 100644
index 000000000000..940333f2d69c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ISSI LED controllers bindings for IS31FL319{0,1,3,6,9}
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description: |
+  The IS31FL319X are LED controllers with I2C interface.
+  Previously known as Si-En SN319{0,1,3,6,9}.
+
+  For more product information please see the links below:
+    https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3190
+      - issi,is31fl3191
+      - issi,is31fl3193
+      - issi,is31fl3196
+      - issi,is31fl3199
+      - si-en,sn3190
+      - si-en,sn3191
+      - si-en,sn3193
+      - si-en,sn3196
+      - si-en,sn3199
+
+  reg:
+    maxItems: 1
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO attached to the SDB pin.
+
+  audio-gain-db:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Audio gain selection for external analog modulation input.
+    enum: [0, 3, 6, 9, 12, 15, 18, 21]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-9]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 1
+        maximum: 9
+
+      led-max-microamp:
+        description:
+          Note that a driver will take the lowest of all LED limits
+          since the chip has a single global setting. The lowest value
+          will be chosen due to the PWM specificity, where lower
+          brightness is achieved by reducing the duty-cycle of pulses
+          and not the current, which will always have its peak value
+          equal to led-max-microamp.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - issi,is31fl3193
+              - si-en,sn3190
+              - si-en,sn3191
+              - si-en,sn3193
+    then:
+      properties:
+        reg:
+          enum: [0x68, 0x69, 0x6a, 0x6b]
+
+        audio-gain-db: false
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 42000
+              enum: [5000, 10000, 17500, 30000, 42000]
+    else:
+      properties:
+        reg:
+          enum: [0x64, 0x65, 0x66, 0x67]
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 20000
+              enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - si-en,sn3190
+              - si-en,sn3191
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3193
+              - si-en,sn3193
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3196
+              - si-en,sn3196
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 6
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@65 {
+            compatible = "issi,is31fl3196";
+            reg = <0x65>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+            led@1 {
+                reg = <1>;
+                label = "red:aux";
+                led-max-microamp = <10000>;
+            };
+
+            led@5 {
+                reg = <5>;
+                label = "green:power";
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..bac95a51afa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  KTD2692 is the ideal power solution for high-power flash LEDs.
+  It uses ExpressWire single-wire programming for maximum flexibility.
+
+  The ExpressWire interface through CTRL pin can control LED on/off and
+  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+  Flash timeout, LVP(low voltage protection).
+
+  Also, When the AUX pin is pulled high while CTRL pin is high,
+  LED current will be ramped up to the flash-mode current level.
+
+properties:
+  compatible:
+    const: kinetic,ktd2692
+
+  ctrl-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  aux-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  vin-supply:
+    description: LED supply (2.7V to 5.5V).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    description: Properties for the LED.
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us:
+        description: Flash LED maximum timeout.
+
+      led-max-microamp:
+        maximum: 300000
+        description: Minimum Threshold for Timer protection
+          is defined internally (Maximum 300mA).
+
+      flash-max-microamp:
+        maximum: 300000
+        description: Flash LED maximum current
+          Formula - I(uA) = 15000000 / Rset.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ctrl-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    ktd2692 {
+      compatible = "kinetic,ktd2692";
+      ctrl-gpios = <&gpc0 1 0>;
+      aux-gpios = <&gpc0 2 0>;
+      vin-supply = <&vbat>;
+
+      led {
+        function = LED_FUNCTION_FLASH;
+        color = <LED_COLOR_ID_WHITE>;
+        flash-max-timeout-us = <250000>;
+        flash-max-microamp = <150000>;
+        led-max-microamp = <25000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
deleted file mode 100644
index 62ed17ec075b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
-
-The device is controlled through two pins: FL_EN and EN_SET. The pins when,
-asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
-respectively. In order to add a capability of selecting the strobe signal source
-(e.g. CPU or camera sensor) there is an additional switch required, independent
-of the flash chip. The switch is controlled with pin control.
-
-Required properties:
-
-- compatible : Must be "skyworks,aat1290".
-- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
-- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
-
-Optional properties:
-- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
-		"default" and "host" must refer to the same pin configuration
-		node, which sets the host as a strobe signal provider. Entry
-		"isp" must refer to the pin configuration node, which sets the
-		ISP as a strobe signal provider.
-
-A discrete LED element connected to the device must be represented by a child
-node - see Documentation/devicetree/bindings/leds/common.txt.
-
-Required properties of the LED child node:
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-                       Maximum flash LED supply current can be calculated using
-                       following formula: I = 1A * 162kohm / Rset.
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-                         Maximum flash timeout can be calculated using following
-                         formula: T = 8.82 * 10^9 * Ct.
-
-Optional properties of the LED child node:
-- function : see Documentation/devicetree/bindings/leds/common.txt
-- color : see Documentation/devicetree/bindings/leds/common.txt
-- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-
-Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
-a switch that allows for routing strobe signal either from the host or from
-the camera sensor):
-
-#include "exynos4412.dtsi"
-#include <dt-bindings/leds/common.h>
-
-led-controller {
-	compatible = "skyworks,aat1290";
-	flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-	enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default", "host", "isp";
-	pinctrl-0 = <&camera_flash_host>;
-	pinctrl-1 = <&camera_flash_host>;
-	pinctrl-2 = <&camera_flash_isp>;
-
-	camera_flash: led {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-max-microamp = <520833>;
-		flash-max-microamp = <1012500>;
-		flash-max-timeout-us = <1940000>;
-	};
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
new file mode 100644
index 000000000000..52252fb6bb32
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's BCM63138 LEDs controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  This LEDs controller was first used on BCM63138 and later reused on BCM4908,
+  BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
+
+  It supports up to 32 LEDs that can be connected parallelly or serially. It
+  also includes limited support for hardware blinking.
+
+  Binding serially connected LEDs isn't documented yet.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm4908-leds
+              - brcm,bcm6848-leds
+              - brcm,bcm6858-leds
+              - brcm,bcm63148-leds
+              - brcm,bcm63381-leds
+              - brcm,bcm68360-leds
+          - const: brcm,bcm63138-leds
+      - const: brcm,bcm63138-leds
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+        description: LED pin number
+
+      active-low:
+        type: boolean
+        description: Makes LED active low
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    leds@ff800800 {
+        compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+        reg = <0xff800800 0xdc>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0x0>;
+            function = LED_FUNCTION_POWER;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+
+        led@3 {
+            reg = <0x3>;
+            function = LED_FUNCTION_STATUS;
+            color = <LED_COLOR_ID_GREEN>;
+            active-low;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
deleted file mode 100644
index a555d94084b7..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-LEDs connected to Broadcom BCM6328 controller
-
-This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
-In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
-However, on some devices there are Serial LEDs (LEDs connected to a 74x164
-controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
-or by hardware using this driver.
-Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
-exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
-controlled, so the only chance to keep them working is by using this driver.
-
-BCM6328 LED controller has a HWDIS register, which controls whether a LED
-should be controlled by a hardware signal instead of the MODE register value,
-with 0 meaning hardware control enabled and 1 hardware control disabled. This
-is usually 1:1 for hardware to LED signals, but through the activity/link
-registers you have some limited control over rerouting the LEDs (as
-explained later in brcm,link-signal-sources). Even if a LED is hardware
-controlled you are still able to make it blink or light it up if it isn't,
-but you can't turn it off if the hardware decides to light it up. For this
-reason, hardware controlled LEDs aren't registered as LED class devices.
-
-Required properties:
-  - compatible : should be "brcm,bcm6328-leds".
-  - #address-cells : must be 1.
-  - #size-cells : must be 0.
-  - reg : BCM6328 LED controller address and size.
-
-Optional properties:
-  - brcm,serial-leds : Boolean, enables Serial LEDs.
-    Default : false
-  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
-    Default : false
-  - brcm,serial-clk-low : Boolean, makes clock signal active low.
-    Default : false
-  - brcm,serial-dat-low : Boolean, makes data signal active low.
-    Default : false
-  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
-    Default : false
-
-Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
-
-LED sub-node required properties:
-  - reg : LED pin number (only LEDs 0 to 23 are valid).
-
-LED sub-node optional properties:
-  a) Optional properties for sub-nodes related to software controlled LEDs:
-    - label : see Documentation/devicetree/bindings/leds/common.txt
-    - active-low : Boolean, makes LED active low.
-      Default : false
-    - default-state : see
-      Documentation/devicetree/bindings/leds/common.txt
-    - linux,default-trigger : see
-      Documentation/devicetree/bindings/leds/common.txt
-
-  b) Optional properties for sub-nodes related to hardware controlled LEDs:
-    - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
-      Default : false
-    - brcm,link-signal-sources : An array of hardware link
-      signal sources. Up to four link hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-    - brcm,activity-signal-sources : An array of hardware activity
-      signal sources. Up to four activity hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-
-Examples:
-Scenario 1 : BCM6328 with 4 EPHY LEDs
-	leds0: led-controller@10000800 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10000800 0x24>;
-
-		alarm_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:alarm";
-		};
-		inet_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:inet";
-		};
-		power_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-		ephy0_spd@17 {
-			reg = <17>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@18 {
-			reg = <18>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@19 {
-			reg = <19>;
-			brcm,hardware-controlled;
-		};
-		ephy3_spd@20 {
-			reg = <20>;
-			brcm,hardware-controlled;
-		};
-	};
-
-Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-		brcm,serial-leds;
-		brcm,serial-dat-low;
-		brcm,serial-shift-inv;
-
-		gphy0_spd0@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-		};
-		gphy0_spd1@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <1>;
-		};
-		inet_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:inet";
-		};
-		dsl_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:dsl";
-		};
-		usb_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:usb";
-		};
-		wps_green@7 {
-			reg = <7>;
-			active-low;
-			label = "green:wps";
-		};
-		inet_green@8 {
-			reg = <8>;
-			active-low;
-			label = "green:inet";
-		};
-		ephy0_act@9 {
-			reg = <9>;
-			brcm,hardware-controlled;
-		};
-		ephy1_act@10 {
-			reg = <10>;
-			brcm,hardware-controlled;
-		};
-		ephy2_act@11 {
-			reg = <11>;
-			brcm,hardware-controlled;
-		};
-		gphy0_act@12 {
-			reg = <12>;
-			brcm,hardware-controlled;
-		};
-		ephy0_spd@13 {
-			reg = <13>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@14 {
-			reg = <14>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@15 {
-			reg = <15>;
-			brcm,hardware-controlled;
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 3 : BCM6362 with 1 LED for each EPHY
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0>;
-			/* USB link/activity routed to USB LED */
-		};
-		inet@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,activity-signal-sources = <1>;
-			/* INET activity routed to INET LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 4 : BCM6362 with 1 LED for all EPHYs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0 1>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB/INET link/activity routed to USB LED */
-		};
-		ephy@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4 5 6 7>;
-			/* EPHY0/1/2/3 link routed to EPHY0 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 5 : BCM6362 with EPHY LEDs swapped
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB link/act and INET act routed to USB LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
new file mode 100644
index 000000000000..51cc0d82c12e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -0,0 +1,404 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6328 controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+  In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+  However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+  controller), which can either be controlled by software (exporting the 74x164
+  as spi-gpio. See
+  Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware
+  using this driver.
+  Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+  exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+  controlled, so the only chance to keep them working is by using this driver.
+
+  BCM6328 LED controller has a HWDIS register, which controls whether a LED
+  should be controlled by a hardware signal instead of the MODE register value,
+  with 0 meaning hardware control enabled and 1 hardware control disabled. This
+  is usually 1:1 for hardware to LED signals, but through the activity/link
+  registers you have some limited control over rerouting the LEDs (as
+  explained later in brcm,link-signal-sources). Even if a LED is hardware
+  controlled you are still able to make it blink or light it up if it isn't,
+  but you can't turn it off if the hardware decides to light it up. For this
+  reason, hardware controlled LEDs aren't registered as LED class devices.
+
+  Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-leds
+
+  reg:
+    maxItems: 1
+
+  brcm,serial-leds:
+    type: boolean
+    description: Enables Serial LEDs.
+
+  brcm,serial-mux:
+    type: boolean
+    description: Enables Serial LEDs multiplexing.
+
+  brcm,serial-clk-low:
+    type: boolean
+    description: Makes clock signal active low.
+
+  brcm,serial-dat-low:
+    type: boolean
+    description: Makes data signal active low.
+
+  brcm,serial-shift-inv:
+    type: boolean
+    description: Inverts Serial LEDs shift direction.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        items:
+          - maximum: 23
+        description: LED pin number (only LEDs 0 to 23 are valid).
+
+      active-low:
+        type: boolean
+        description: Makes LED active low.
+
+      brcm,hardware-controlled:
+        type: boolean
+        description: Makes this LED hardware controlled.
+
+      brcm,link-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware link signal sources. Up to four link hardware
+          signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
+          where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
+          7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
+          LED, and one LED can have more than one source signal.
+
+      brcm,activity-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware activity signal sources. Up to four activity
+          hardware signals can get muxed into these LEDs. Only valid for LEDs 0
+          to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
+          signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
+          more than one LED, and one LED can have more than one source signal.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* BCM6328 with 4 EPHY LEDs */
+    led-controller@10000800 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10000800 0x24>;
+
+        alarm_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:alarm";
+        };
+
+        inet_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:inet";
+        };
+
+        power_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+
+        ephy0_spd@17 {
+            reg = <17>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@18 {
+            reg = <18>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@19 {
+            reg = <19>;
+            brcm,hardware-controlled;
+        };
+
+        ephy3_spd@20 {
+            reg = <20>;
+            brcm,hardware-controlled;
+        };
+    };
+  - |
+    /* BCM63268 with Serial/GPHY0 LEDs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+        brcm,serial-leds;
+        brcm,serial-dat-low;
+        brcm,serial-shift-inv;
+
+        gphy0_spd0@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+        };
+
+        gphy0_spd1@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <1>;
+        };
+
+        inet_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:inet";
+        };
+
+        dsl_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:dsl";
+        };
+
+        usb_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:usb";
+        };
+
+        wps_green@7 {
+            reg = <7>;
+            active-low;
+            label = "green:wps";
+        };
+
+        inet_green@8 {
+            reg = <8>;
+            active-low;
+            label = "green:inet";
+        };
+
+        ephy0_act@9 {
+            reg = <9>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_act@10 {
+            reg = <10>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_act@11 {
+            reg = <11>;
+            brcm,hardware-controlled;
+        };
+
+        gphy0_act@12 {
+            reg = <12>;
+            brcm,hardware-controlled;
+        };
+
+        ephy0_spd@13 {
+            reg = <13>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@14 {
+            reg = <14>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@15 {
+            reg = <15>;
+            brcm,hardware-controlled;
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for each EPHY */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0>;
+            /* USB link/activity routed to USB LED */
+        };
+
+        inet@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,activity-signal-sources = <1>;
+            /* INET activity routed to INET LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for all EPHYs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0 1>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB/INET link/activity routed to USB LED */
+        };
+
+        ephy@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4 5 6 7>;
+            /* EPHY0/1/2/3 link routed to EPHY0 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with EPHY LEDs swapped */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB link/act and INET act routed to USB LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 37445c68cdef..31840e33dcf5 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common properties for the multicolor LED class.
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   Bindings for multi color LEDs show how to describe current outputs of
@@ -19,22 +19,22 @@ description: |
   LED class.  Common LED nodes and properties are inherited from the common.yaml
   within this documentation directory.
 
-patternProperties:
-  "^multi-led@([0-9a-f])$":
-    type: object
-    description: Represents the LEDs that are to be grouped.
-    properties:
-      color:
-        description: |
-          For multicolor LED support this property should be defined as either
-          LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-          include/linux/leds/common.h.
-        enum: [ 8, 9 ]
-
-    $ref: "common.yaml#"
-
-    required:
-      - color
+properties:
+  $nodename:
+    pattern: "^multi-led(@[0-9a-f])?$"
+
+  color:
+    description: |
+      For multicolor LED support this property should be defined as either
+      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+      include/linux/leds/common.h.
+    enum: [ 8, 9 ]
+
+required:
+  - color
+
+allOf:
+  - $ref: "common.yaml#"
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
deleted file mode 100644
index 676d43ec8169..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-LEDs connected to is31fl319x LED controller chip
-
-Required properties:
-- compatible : Should be any of
-	"issi,is31fl3190"
-	"issi,is31fl3191"
-	"issi,is31fl3193"
-	"issi,is31fl3196"
-	"issi,is31fl3199"
-	"si-en,sn3199".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: 0x64, 0x65, 0x66, or 0x67.
-
-Optional properties:
-- audio-gain-db : audio gain selection for external analog modulation input.
-	Valid values: 0 - 21, step by 3 (rounded down)
-	Default: 0
-- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
-
-Each led is represented as a sub-node of the issi,is31fl319x device.
-There can be less leds subnodes than the chip can support but not more.
-
-Required led sub-node properties:
-- reg : number of LED line
-	Valid values: 1 - number of leds supported by the chip variant.
-
-Optional led sub-node properties:
-- label : see Documentation/devicetree/bindings/leds/common.txt.
-- linux,default-trigger :
-	see Documentation/devicetree/bindings/leds/common.txt.
-- led-max-microamp : (optional)
-	Valid values: 5000 - 40000, step by 5000 (rounded down)
-	Default: 20000 (20 mA)
-	Note: a driver will take the lowest of all led limits since the
-	chip has a single global setting. The lowest value will be chosen
-	due to the PWM specificity, where lower brightness is achieved
-	by reducing the dury-cycle of pulses and not the current, which
-	will always have its peak value equal to led-max-microamp.
-
-Examples:
-
-fancy_leds: leds@65 {
-	compatible = "issi,is31fl3196";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x65>;
-	shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-
-	red_aux: led@1 {
-		label = "red:aux";
-		reg = <1>;
-		led-max-microamp = <10000>;
-	};
-
-	green_power: led@5 {
-		label = "green:power";
-		reg = <5>;
-		linux,default-trigger = "default-on";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
-  See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
-  See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
-  is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
-  Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
-	compatible = "kinetic,ktd2692";
-	ctrl-gpios = <&gpc0 1 0>;
-	aux-gpios = <&gpc0 2 0>;
-	vin-supply = <&vbat>;
-
-	flash-led {
-		label = "ktd2692-flash";
-		led-max-microamp = <300000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1835000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5feadc7..63da380748bf 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LED driver for LP50XX RGB LED from Texas Instruments.
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
@@ -55,8 +55,9 @@ properties:
 patternProperties:
   '^multi-led@[0-9a-f]$':
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     properties:
       reg:
         minItems: 1
@@ -66,8 +67,14 @@ patternProperties:
           for the child node.  The LED modules can either be used stand alone
           or grouped into a module bank.
 
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
     patternProperties:
-      "(^led-[0-9a-f]$|led)":
+      "^led@[0-9a-f]+$":
         type: object
         $ref: common.yaml#
 
@@ -79,60 +86,66 @@ additionalProperties: false
 
 examples:
   - |
-   #include <dt-bindings/gpio/gpio.h>
-   #include <dt-bindings/leds/common.h>
-
-   i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       led-controller@14 {
-           compatible = "ti,lp5009";
-           reg = <0x14>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-           enable-gpios = <&gpio1 16>;
-
-           multi-led@1 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x1>;
-               color = <LED_COLOR_ID_RGB>;
-               function = LED_FUNCTION_CHARGING;
-
-               led-0 {
-                   color = <LED_COLOR_ID_RED>;
-               };
-
-               led-1 {
-                   color = <LED_COLOR_ID_GREEN>;
-               };
-
-               led-2 {
-                   color = <LED_COLOR_ID_BLUE>;
-               };
-          };
-
-          multi-led@2 {
-            #address-cells = <1>;
-            #size-cells = <2>;
-            reg = <0x2 0x3 0x5>;
-            color = <LED_COLOR_ID_RGB>;
-            function = LED_FUNCTION_STANDBY;
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
-            led-6 {
-              color = <LED_COLOR_ID_RED>;
-            };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-            led-7 {
-              color = <LED_COLOR_ID_GREEN>;
+        led-controller@14 {
+            compatible = "ti,lp5009";
+            reg = <0x14>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            enable-gpios = <&gpio1 16>;
+
+            multi-led@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x1>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_CHARGING;
+
+                led@0 {
+                     reg = <0x0>;
+                     color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                     reg = <0x1>;
+                     color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                     reg = <0x2>;
+                     color = <LED_COLOR_ID_BLUE>;
+                };
             };
 
-            led-8 {
-              color = <LED_COLOR_ID_BLUE>;
+            multi-led@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x3>, <0x4>, <0x5>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+
+                led@3 {
+                    reg = <0x3>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@4 {
+                    reg = <0x4>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@5 {
+                    reg = <0x5>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
             };
-         };
-       };
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index f552cd143d5b..7ec676e53851 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -108,119 +108,119 @@ additionalProperties: false
 
 examples:
   - |
-   #include <dt-bindings/leds/common.h>
-
-   i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       led-controller@32 {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           compatible = "ti,lp8501";
-           reg = <0x32>;
-           clock-mode = /bits/ 8 <2>;
-           pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
-
-           led@0 {
-               reg = <0>;
-               chan-name = "d1";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@1 {
-               reg = <1>;
-               chan-name = "d2";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@2 {
-               reg = <2>;
-               chan-name = "d3";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@3 {
-               reg = <3>;
-               chan-name = "d4";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@4 {
-               reg = <4>;
-               chan-name = "d5";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@5 {
-               reg = <5>;
-               chan-name = "d6";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@6 {
-               reg = <6>;
-               chan-name = "d7";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@7 {
-               reg = <7>;
-               chan-name = "d8";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@8 {
-               reg = <8>;
-               chan-name = "d9";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@32 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "ti,lp8501";
+            reg = <0x32>;
+            clock-mode = /bits/ 8 <2>;
+            pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+
+            led@0 {
+                reg = <0>;
+                chan-name = "d1";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@1 {
+                reg = <1>;
+                chan-name = "d2";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@2 {
+                reg = <2>;
+                chan-name = "d3";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@3 {
+                reg = <3>;
+                chan-name = "d4";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@4 {
+                reg = <4>;
+                chan-name = "d5";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@5 {
+                reg = <5>;
+                chan-name = "d6";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@6 {
+                reg = <6>;
+                chan-name = "d7";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@7 {
+                reg = <7>;
+                chan-name = "d8";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@8 {
+                reg = <8>;
+                chan-name = "d9";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
         };
 
-       led-controller@33 {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           compatible = "national,lp5523";
-           reg = <0x33>;
-           clock-mode = /bits/ 8 <0>;
-
-           multi-led@2 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x2>;
-               color = <LED_COLOR_ID_RGB>;
-               function = LED_FUNCTION_STANDBY;
-               linux,default-trigger = "heartbeat";
-
-               led@0 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x0>;
-                   color = <LED_COLOR_ID_GREEN>;
-               };
-
-               led@1 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x1>;
-                   color = <LED_COLOR_ID_BLUE>;
-               };
-
-               led@6 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x6>;
-                   color = <LED_COLOR_ID_RED>;
-               };
+        led-controller@33 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "national,lp5523";
+            reg = <0x33>;
+            clock-mode = /bits/ 8 <0>;
+
+            multi-led@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x2>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+                linux,default-trigger = "heartbeat";
+
+                led@0 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@1 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x1>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+
+                led@6 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x6>;
+                    color = <LED_COLOR_ID_RED>;
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
new file mode 100644
index 000000000000..69e579226d9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
+  Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+  and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6360-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^(multi-)?led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        description: Index of the LED.
+        enum:
+          - 0 # LED output ISINK1
+          - 1 # LED output ISINK2
+          - 2 # LED output ISINK3
+          - 3 # LED output ISINKML
+          - 4 # LED output FLASH1
+          - 5 # LED output FLASH2
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/leds/common.h>
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     multi-led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RGB>;
+       led-max-microamp = <24000>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       led@0 {
+         reg = <0>;
+         color = <LED_COLOR_ID_RED>;
+       };
+       led@1 {
+         reg = <1>;
+         color = <LED_COLOR_ID_GREEN>;
+       };
+       led@2 {
+         reg = <2>;
+         color = <LED_COLOR_ID_BLUE>;
+       };
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+
+  - |
+
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RED>;
+       led-max-microamp = <24000>;
+     };
+     led@1 {
+       reg = <1>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_GREEN>;
+       led-max-microamp = <24000>;
+     };
+     led@2 {
+       reg = <2>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_BLUE>;
+       led-max-microamp = <24000>;
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 000000000000..bd6ec04a8727
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          active-low:
+            description: For PWMs where the LED is wired to supply rather than ground.
+            type: boolean
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+            color = <LED_COLOR_ID_RGB>;
+            function = LED_FUNCTION_INDICATOR;
+            max-brightness = <65535>;
+
+            led-red {
+                pwms = <&pwm1 0 1000000>;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led-green {
+                pwms = <&pwm2 0 1000000>;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led-blue {
+                pwms = <&pwm3 0 1000000>;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..497db289169d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table, the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm660l-lpg
+      - qcom,pm8150b-lpg
+      - qcom,pm8150l-lpg
+      - qcom,pm8350c-pwm
+      - qcom,pm8916-pwm
+      - qcom,pm8941-lpg
+      - qcom,pm8994-lpg
+      - qcom,pmc8180c-lpg
+      - qcom,pmi8994-lpg
+      - qcom,pmi8998-lpg
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputed, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg: true
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
new file mode 100644
index 000000000000..e27f57bb52ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  There are two LED outputs available - FLED1 and FLED2. Each of them can
+  control a separate LED or they can be connected together to double the
+  maximum current for a single connected LED. One LED is represented by one
+  child node.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-led
+
+  maxim,boost-mode:
+    description:
+      In boost mode the device can produce up to 1.2A of total current on both
+      outputs. The maximum current on each output is reduced to 625mA then. If
+      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+      case both current sources are used.
+      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  maxim,boost-mvout:
+    description: |
+      Output voltage of the boost module in millivolts.
+      Valid values: 3300 - 5500, step by 25 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3300
+    maximum: 5500
+    default: 3300
+
+  maxim,mvsys-min:
+    description: |
+      Low input voltage level in millivolts. Flash is not fired if chip
+      estimates that system voltage could drop below this level due to flash
+      power consumption.
+      Valid values: 2400 - 3400, step by 33 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2400
+    maximum: 3400
+    default: 2400
+
+patternProperties:
+  "^([a-z]+-)?led[01]?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      led-max-microamp:
+        description: |
+          Valid values for a LED connected to one FLED output:
+            15625 - 250000, step by 15625 (rounded down)
+          Valid values for a LED connected to both FLED outputs:
+            15625 - 500000, step by 15625 (rounded down)
+
+      flash-max-microamp:
+        description: |
+          Valid values for a single LED connected to one FLED output
+          (boost mode must be turned off):
+            15625 - 1000000, step by 15625 (rounded down)
+          Valid values for a single LED connected to both FLED outputs:
+            15625 - 1250000, step by 15625 (rounded down)
+          Valid values for two LEDs case:
+            15625 - 625000, step by 15625 (rounded down)
+
+      flash-max-timeout-us:
+        description: |
+          Valid values: 62500 - 1000000, step by 62500 (rounded down)
+        minimum: 62500
+        maximum: 1000000
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+      - led-sources
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
new file mode 100644
index 000000000000..e9d02ed6a590
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-flashlight
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
new file mode 100644
index 000000000000..16b3abc2af3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6370-indicator
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-3]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - color
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - color
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml
new file mode 100644
index 000000000000..3e020d700c00
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/regulator-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Bindings for Regulator LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Regulator LEDs are powered by a single regulator such that they can
+  be turned on or off by enabling or disabling the regulator. The available
+  brightness settings will be inferred from the available voltages on the
+  regulator, and any constraints on the voltage or current will need to be
+  specified on the regulator.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^led.*$'
+
+  compatible:
+    const: regulator-led
+
+  vled-supply:
+    description:
+      The regulator controlling the current to the LED.
+
+  function: true
+  color: true
+  linux,default-trigger: true
+  default-state: true
+
+required:
+  - compatible
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-heartbeat {
+        compatible = "regulator-led";
+        vled-supply = <&regulator>;
+        function = LED_FUNCTION_STATUS;
+        color = <LED_COLOR_ID_BLUE>;
+        linux,default-trigger = "heartbeat";
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 000000000000..a6aaa92dbccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+  asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+  respectively. In order to add a capability of selecting the strobe signal
+  source (e.g. CPU or camera sensor) there is an additional switch required,
+  independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+  compatible:
+    const: skyworks,aat1290
+
+  enset-gpios:
+    maxItems: 1
+    description: EN_SET pin
+
+  flen-gpios:
+    maxItems: 1
+    description: FL_EN pin
+
+  led:
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-max-microamp: true
+
+      flash-max-microamp:
+        description: |
+          Maximum flash LED supply current can be calculated using following
+          formula:: I = 1A * 162 kOhm / Rset.
+
+      flash-max-timeout-us:
+        description: |
+          Maximum flash timeout can be calculated using following formula::
+            T = 8.82 * 10^9 * Ct.
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: host
+      - const: isp
+
+  pinctrl-0: true
+  pinctrl-1: true
+  pinctrl-2: true
+
+required:
+  - compatible
+  - enset-gpios
+  - flen-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    // Ct = 220 nF, Rset = 160 kOhm
+    led-controller {
+        compatible = "skyworks,aat1290";
+        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default", "host", "isp";
+        pinctrl-0 = <&camera_flash_host>;
+        pinctrl-1 = <&camera_flash_host>;
+        pinctrl-2 = <&camera_flash_isp>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <520833>;
+            flash-max-microamp = <1012500>;
+            flash-max-timeout-us = <1940000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index aa2b3bf56b57..dfd26b998189 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Message-Handling-Unit Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller
@@ -51,4 +51,3 @@ examples:
           interrupts = <208>, <209>, <210>;
           #mbox-cells = <1>;
     };
-
diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
index c4255f42e801..5c5c328b3134 100644
--- a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
@@ -27,14 +27,20 @@ properties:
           for example for the display controller, the system management
           controller and the NVMe coprocessor.
         items:
-          - const: apple,t8103-asc-mailbox
+          - enum:
+              - apple,t8103-asc-mailbox
+              - apple,t6000-asc-mailbox
+          - const: apple,asc-mailbox-v4
 
       - description:
           M3 mailboxes are an older variant with a slightly different MMIO
           interface still found on the M1. It is used for the Thunderbolt
           co-processors.
         items:
-          - const: apple,t8103-m3-mailbox
+          - enum:
+              - apple,t8103-m3-mailbox
+              - apple,t6000-m3-mailbox
+          - const: apple,m3-mailbox-v2
 
   reg:
     maxItems: 1
@@ -71,7 +77,7 @@ additionalProperties: false
 examples:
   - |
         mailbox@77408000 {
-                compatible = "apple,t8103-asc-mailbox";
+                compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
                 reg = <0x77408000 0x4000>;
                 interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
                 interrupt-names = "send-empty", "send-not-empty",
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
index bd49c201477d..d9a4f4a02d7c 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -57,6 +57,7 @@ properties:
     maxItems: 1
 
   interrupts:
+    minItems: 2
     items:
       - description: low-priority non-secure
       - description: high-priority non-secure
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index a337bcd80c4a..191c1ce15009 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -28,8 +28,13 @@ properties:
       - const: fsl,imx7ulp-mu
       - const: fsl,imx8ulp-mu
       - const: fsl,imx8-mu-scu
+      - const: fsl,imx8-mu-seco
+      - const: fsl,imx93-mu-s4
       - const: fsl,imx8ulp-mu-s4
       - items:
+          - const: fsl,imx93-mu
+          - const: fsl,imx8ulp-mu
+      - items:
           - enum:
               - fsl,imx7s-mu
               - fsl,imx8mq-mu
@@ -51,7 +56,14 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
 
   "#mbox-cells":
     description: |
@@ -60,14 +72,16 @@ properties:
       type      : Channel type
       channel   : Channel number
 
-      This MU support 4 type of unidirectional channels, each type
-      has 4 channels. A total of 16 channels. Following types are
+      This MU support 5 type of unidirectional channels, each type
+      has 4 channels except RST channel which only has 1 channel.
+      A total of 17 channels.  Following types are
       supported:
       0 - TX channel with 32bit transmit register and IRQ transmit
           acknowledgment support.
       1 - RX channel with 32bit receive register and IRQ support
       2 - TX doorbell channel. Without own register and no ACK support.
       3 - RX doorbell channel.
+      4 - RST channel
     const: 2
 
   clocks:
@@ -86,6 +100,27 @@ required:
   - interrupts
   - "#mbox-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx93-mu-s4
+    then:
+      properties:
+        interrupt-names:
+          minItems: 2
+        interrupts:
+          minItems: 2
+
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      not:
+        required:
+          - interrupt-names
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
new file mode 100644
index 000000000000..c579ac074ca7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Global Command Engine Mailbox
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is used to help read/write registers with
+  critical time limitation, such as updating display configuration during the
+  vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6779-gce
+      - mediatek,mt8173-gce
+      - mediatek,mt8183-gce
+      - mediatek,mt8186-gce
+      - mediatek,mt8192-gce
+      - mediatek,mt8195-gce
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell describes the Thread ID of the GCE,
+      the second cell describes the priority of the GCE thread
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Global Command Engine clock
+
+  clock-names:
+    items:
+      - const: gce
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-gce
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gce: mailbox@10212000 {
+            compatible = "mediatek,mt8173-gce";
+            reg = <0 0x10212000 0 0x1000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+            #mbox-cells = <2>;
+            clocks = <&infracfg CLK_INFRA_GCE>;
+            clock-names = "gce";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
index bbb173ea483c..935937c67133 100644
--- a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#"
+$id: "http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
 title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
@@ -11,12 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    const: microchip,polarfire-soc-mailbox
+    const: microchip,mpfs-mailbox
 
   reg:
-    items:
-      - description: mailbox data registers
-      - description: mailbox interrupt registers
+    oneOf:
+      - items:
+          - description: mailbox control & data registers
+          - description: mailbox interrupt registers
+        deprecated: true
+      - items:
+          - description: mailbox control registers
+          - description: mailbox interrupt registers
+          - description: mailbox data registers
 
   interrupts:
     maxItems: 1
@@ -38,8 +44,9 @@ examples:
       #address-cells = <2>;
       #size-cells = <2>;
       mbox: mailbox@37020000 {
-        compatible = "microchip,polarfire-soc-mailbox";
-        reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>;
+        compatible = "microchip,mpfs-mailbox";
+        reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+              <0x0 0x37020800 0x0 0x100>;
         interrupt-parent = <&L1>;
         interrupts = <96>;
         #mbox-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
new file mode 100644
index 000000000000..72c1d9e82c89
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ADSP mailbox
+
+maintainers:
+  - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
+
+description: |
+  The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC
+  to communicate with ADSP by passing messages through two mailbox channels.
+  The MTK ADSP mailbox IPC also provides the ability for one processor to
+  signal the other processor using interrupts.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-adsp-mbox
+      - mediatek,mt8186-adsp-mbox
+
+  "#mbox-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    adsp_mailbox0:mailbox@10816000 {
+        compatible = "mediatek,mt8195-adsp-mbox";
+        #mbox-cells = <0>;
+        reg = <0x10816000 0x1000>;
+        interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
deleted file mode 100644
index 98fe37e8b17b..000000000000
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-MediaTek GCE
-===============
-
-The Global Command Engine (GCE) is used to help read/write registers with
-critical time limitation, such as updating display configuration during the
-vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
-
-CMDQ driver uses mailbox framework for communication. Please refer to
-mailbox.txt for generic information about mailbox device-tree bindings.
-
-Required properties:
-- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce",
-  "mediatek,mt8192-gce", "mediatek,mt8195-gce" or "mediatek,mt6779-gce".
-- reg: Address range of the GCE unit
-- interrupts: The interrupt signal from the GCE block
-- clock: Clocks according to the common clock binding
-- clock-names: Must be "gce" to stand for GCE clock
-- #mbox-cells: Should be 2.
-	<&phandle channel priority>
-	phandle: Label name of a gce node.
-	channel: Channel of mailbox. Be equal to the thread id of GCE.
-	priority: Priority of GCE thread.
-
-Required properties for a client device:
-- mboxes: Client use mailbox to communicate with GCE, it should have this
-  property and list of phandle, mailbox specifiers.
-Optional properties for a client device:
-- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
-  to the register address, it should have this property and list of phandle,
-  sub-system specifiers.
-  <&phandle subsys_number start_offset size>
-  phandle: Label name of a gce node.
-  subsys_number: specify the sub-system id which is corresponding
-                 to the register address.
-  start_offset: the start offset of register address that GCE can access.
-  size: the total size of register address that GCE can access.
-
-Optional properties for a client mutex node:
-- mediatek,gce-events: GCE events used by clients. The event numbers are
-  defined in 'dt-bindings/gce/<chip>-gce.h'.
-
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
-'dt-bindings/gce/mt8183-gce.h', 'dt-bindings/gce/mt8192-gce.h',
-'dt-bindings/gce/mt8195-gce.h' or 'dt-bindings/gce/mt6779-gce.h'.
-Such as sub-system ids, thread priority, event ids.
-
-Example:
-
-	gce: gce@10212000 {
-		compatible = "mediatek,mt8173-gce";
-		reg = <0 0x10212000 0 0x1000>;
-		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_GCE>;
-		clock-names = "gce";
-		#mbox-cells = <2>;
-	};
-
-Example for a client device:
-
-	mmsys: clock-controller@14000000 {
-		compatible = "mediatek,mt8173-mmsys";
-		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>,
-			 <&gce 1 CMDQ_THR_PRIO_LOWEST>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-		mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
-					  <&gce SUBSYS_1401XXXX 0x2000 0x100>;
-		...
-	};
-
-Example for a client mutex node:
-	mutex: mutex@14020000 {
-		compatible = "mediatek,mt8173-disp-mutex";
-		reg = <0 0x14020000 0 0x1000>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		clocks = <&mmsys CLK_MM_MUTEX_32K>;
-		mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
-				      <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
index 9f7a7296b57f..a3e87516d637 100644
--- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -26,6 +26,15 @@ description: |
   second cell is used to identify the mailbox that the client is going
   to use.
 
+  For shared mailboxes, the first cell composed of two fields:
+    - bits 15..8:
+        A bit mask of flags that further specifies the type of shared
+        mailbox to be used (based on the data size). If no flag is
+        specified then, 32-bit shared mailbox is used.
+    - bits 7..0:
+        Defines the type of the mailbox to be used. This field should be
+        TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes.
+
   For doorbells, the second cell specifies the index of the doorbell to
   use.
 
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 01e9d9155c83..f24fd84b4b05 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -15,48 +15,47 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,ipq6018-apcs-apps-global
-      - qcom,ipq8074-apcs-apps-global
-      - qcom,msm8916-apcs-kpss-global
-      - qcom,msm8939-apcs-kpss-global
-      - qcom,msm8953-apcs-kpss-global
-      - qcom,msm8994-apcs-kpss-global
-      - qcom,msm8996-apcs-hmss-global
-      - qcom,msm8998-apcs-hmss-global
-      - qcom,qcm2290-apcs-hmss-global
-      - qcom,qcs404-apcs-apps-global
-      - qcom,sc7180-apss-shared
-      - qcom,sc8180x-apss-shared
-      - qcom,sdm660-apcs-hmss-global
-      - qcom,sdm845-apss-shared
-      - qcom,sm6125-apcs-hmss-global
-      - qcom,sm6115-apcs-hmss-global
-      - qcom,sm8150-apss-shared
-
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq6018-apcs-apps-global
+              - qcom,ipq8074-apcs-apps-global
+              - qcom,msm8976-apcs-kpss-global
+              - qcom,msm8996-apcs-hmss-global
+              - qcom,msm8998-apcs-hmss-global
+              - qcom,qcm2290-apcs-hmss-global
+              - qcom,sc7180-apss-shared
+              - qcom,sc8180x-apss-shared
+              - qcom,sdm660-apcs-hmss-global
+              - qcom,sdm845-apss-shared
+              - qcom,sm6125-apcs-hmss-global
+              - qcom,sm6115-apcs-hmss-global
+              - qcom,sm8150-apss-shared
+      - items:
+          - enum:
+              - qcom,msm8916-apcs-kpss-global
+              - qcom,msm8939-apcs-kpss-global
+              - qcom,msm8953-apcs-kpss-global
+              - qcom,msm8994-apcs-kpss-global
+              - qcom,qcs404-apcs-apps-global
+          - const: syscon
   reg:
     maxItems: 1
 
   clocks:
     description: phandles to the parent clocks of the clock driver
     minItems: 2
-    items:
-      - description: primary pll parent of the clock driver
-      - description: auxiliary parent
-      - description: reference clock
+    maxItems: 3
 
   '#mbox-cells':
     const: 1
 
   '#clock-cells':
-    const: 0
+    enum: [0, 1]
 
   clock-names:
     minItems: 2
-    items:
-      - const: pll
-      - const: aux
-      - const: ref
+    maxItems: 3
 
 required:
   - compatible
@@ -70,8 +69,6 @@ allOf:
       properties:
         compatible:
           enum:
-            - qcom,ipq6018-apcs-apps-global
-            - qcom,ipq8074-apcs-apps-global
             - qcom,msm8916-apcs-kpss-global
             - qcom,msm8994-apcs-kpss-global
             - qcom,msm8996-apcs-hmss-global
@@ -85,7 +82,13 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 2
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
   - if:
       properties:
         compatible:
@@ -94,7 +97,46 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 3
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+            - description: reference clock
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+            - const: ref
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,ipq6018-apcs-apps-global
+            - qcom,ipq8074-apcs-apps-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: XO clock
+        clock-names:
+          items:
+            - const: pll
+            - const: xo
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,ipq6018-apcs-apps-global
+            - qcom,ipq8074-apcs-apps-global
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+    else:
+      properties:
+        '#clock-cells':
+          const: 0
+
 examples:
 
   # Example apcs with msm8996
@@ -120,7 +162,7 @@ examples:
     #define GCC_APSS_AHB_CLK_SRC  1
     #define GCC_GPLL0_AO_OUT_MAIN 123
     apcs: mailbox@b011000 {
-        compatible = "qcom,qcs404-apcs-apps-global";
+        compatible = "qcom,qcs404-apcs-apps-global", "syscon";
         reg = <0x0b011000 0x1000>;
         #mbox-cells = <1>;
         clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
index 866efb278813..baca4786ff94 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -25,8 +25,10 @@ properties:
     items:
       - enum:
           - qcom,sm6350-ipcc
+          - qcom,sm6375-ipcc
           - qcom,sm8250-ipcc
           - qcom,sm8350-ipcc
+          - qcom,sm8450-ipcc
           - qcom,sc7280-ipcc
       - const: qcom,ipcc
 
@@ -61,23 +63,14 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
 
-        mailbox@408000 {
-                compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
-                reg = <0x408000 0x1000>;
-                interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-controller;
-                #interrupt-cells = <3>;
-                #mbox-cells = <2>;
-        };
-
-        smp2p-modem {
-                compatible = "qcom,smp2p";
-                interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
-                                IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
-                mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
-
-                /* Other SMP2P fields */
-        };
+    mailbox@408000 {
+        compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+        reg = <0x408000 0x1000>;
+        interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index 8eb4bf52ea27..2c8b47285aa3 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -30,15 +30,11 @@ properties:
     items:
       - description: rx channel occupied
       - description: tx channel free
-      - description: wakeup source
-    minItems: 2
 
   interrupt-names:
     items:
       - const: rx
       - const: tx
-      - const: wakeup
-    minItems: 2
 
   wakeup-source: true
 
@@ -70,10 +66,9 @@ examples:
       #mbox-cells = <1>;
       reg = <0x4c001000 0x400>;
       st,proc-id = <0>;
-      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-      		      <&aiec 62 1>;
-      interrupt-names = "rx", "tx", "wakeup";
+      interrupts-extended = <&exti 61 1>,
+                            <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "rx", "tx";
       clocks = <&rcc_clk IPCC>;
       wakeup-source;
     };
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
index e864d798168d..d433e496ec6e 100644
--- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
@@ -180,15 +180,6 @@ allOf:
         compatible:
           enum:
             - ti,am654-mailbox
-    then:
-      required:
-        - interrupt-parent
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - ti,am654-mailbox
             - ti,am64-mailbox
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index ad76edccf881..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
-               +-------------------------------------+
-               | Xilinx ZynqMP IPI Controller        |
-               +-------------------------------------+
-    +--------------------------------------------------+
-ATF                    |                     |
-                       |                     |
-                       |                     |
-    +--------------------------+             |
-                       |                     |
-                       |                     |
-    +--------------------------------------------------+
-            +------------------------------------------+
-            |  +----------------+   +----------------+ |
-Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
-            |  |  Registers     |   |                | |
-            |  |                |   |                | |
-            |  +----------------+   +----------------+ |
-            |                                          |
-            | Xilinx IPI Agent Block                   |
-            +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible:		Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent:	Phandle for the interrupt controller
-- interrupts:		Interrupt information corresponding to the
-			interrupt-names property.
-- xlnx,ipi-id:		local Xilinx IPI agent ID
-- #address-cells:	number of address cells of internal IPI mailbox nodes
-- #size-cells:		number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg:			IPI buffers address ranges
-- reg-names:		Names of the reg resources. It should have:
-			* local_request_region
-			  - IPI request msg buffer written by local and read
-			    by remote
-			* local_response_region
-			  - IPI response msg buffer written by local and read
-			    by remote
-			* remote_request_region
-			  - IPI request msg buffer written by remote and read
-			    by local
-			* remote_response_region
-			  - IPI response msg buffer written by remote and read
-			    by local
-- #mbox-cells:		Shall be 1. It contains:
-			* tx(0) or rx(1) channel
-- xlnx,ipi-id:		remote Xilinx IPI agent ID of which the mailbox is
-			connected to.
-
-Optional properties:
---------------------
-- method:              The method of accessing the IPI agent registers.
-                       Permitted values are: "smc" and "hvc". Default is
-                       "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes:		Standard property to specify a mailbox
-			(See ./mailbox.txt)
-- mbox-names:		List of identifier  strings for each mailbox
-			channel.
-
-Example:
-===========================
-	zynqmp_ipi {
-		compatible = "xlnx,zynqmp-ipi-mailbox";
-		interrupt-parent = <&gic>;
-		interrupts = <0 29 4>;
-		xlnx,ipi-id = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff990400 {
-			reg = <0xff990400 0x20>,
-			      <0xff990420 0x20>,
-			      <0xff990080 0x20>,
-			      <0xff9900a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <1>;
-		};
-		/* APU<->RPU1 IPI mailbox controller */
-		ipi_mailbox_rpu1: mailbox@ff990440 {
-			reg = <0xff990440 0x20>,
-			      <0xff990460 0x20>,
-			      <0xff990280 0x20>,
-			      <0xff9902a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <2>;
-		};
-	};
-	rpu0 {
-		...
-		mboxes = <&ipi_mailbox_rpu0 0>,
-			 <&ipi_mailbox_rpu0 1>;
-		mbox-names = "tx", "rx";
-	};
-	rpu1 {
-		...
-		mboxes = <&ipi_mailbox_rpu1 0>,
-			 <&ipi_mailbox_rpu1 1>;
-		mbox-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 000000000000..2193141dd7fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+  The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+  messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+  agent owns registers used for notification and buffers for message.
+
+               +-------------------------------------+
+               | Xilinx ZynqMP IPI Controller        |
+               +-------------------------------------+
+    +--------------------------------------------------+
+  TF-A                   |                     |
+                         |                     |
+                         |                     |
+    +--------------------------+               |
+                         |                     |
+                         |                     |
+    +--------------------------------------------------+
+              +------------------------------------------+
+              |  +----------------+   +----------------+ |
+  Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
+              |  |  Registers     |   |                | |
+              |  |                |   |                | |
+              |  +----------------+   +----------------+ |
+              |                                          |
+              | Xilinx IPI Agent Block                   |
+              +------------------------------------------+
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ipi-mailbox
+
+  method:
+    description: |
+      The method of calling the PM-API firmware layer.
+      Permitted values are.
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - smc
+      - hvc
+    default: smc
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  xlnx,ipi-id:
+    description: |
+      Remote Xilinx IPI agent ID of which the mailbox is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  '^mailbox@[0-9a-f]+$':
+    description: Internal ipi mailbox node
+    type: object  # DT nodes are json objects
+    properties:
+      xlnx,ipi-id:
+        description:
+          Remote Xilinx IPI agent ID of which the mailbox is connected to.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      '#mbox-cells':
+        const: 1
+        description:
+          It contains tx(0) or rx(1) channel IPI id number.
+
+      reg:
+        maxItems: 4
+
+      reg-names:
+        items:
+          - const: local_request_region
+          - const: local_response_region
+          - const: remote_request_region
+          - const: remote_response_region
+
+    required:
+      - reg
+      - reg-names
+      - "#mbox-cells"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+  - xlnx,ipi-id
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    amba {
+      #address-cells = <0x2>;
+      #size-cells = <0x2>;
+      zynqmp-mailbox {
+        compatible = "xlnx,zynqmp-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,ipi-id = <0>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        mailbox: mailbox@ff9905c0 {
+          reg = <0x0 0xff9905c0 0x0 0x20>,
+                <0x0 0xff9905e0 0x0 0x20>,
+                <0x0 0xff990e80 0x0 0x20>,
+                <0x0 0xff990ea0 0x0 0x20>;
+          reg-names = "local_request_region",
+                      "local_response_region",
+                      "remote_request_region",
+                      "remote_response_region";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allegro,al5e.yaml b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
index 135bea94b587..2899d26d690e 100644
--- a/Documentation/devicetree/bindings/media/allegro,al5e.yaml
+++ b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allegro,al5e.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allegro DVT Video IP Codecs Device Tree Bindings
+title: Allegro DVT Video IP Codecs
 
 maintainers:
   - Michael Tretter <m.tretter@pengutronix.de>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 6ced94064215..617264ce477d 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A10 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 6d8395d6bca0..704033e21ee8 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Infrared Controller Device Tree Bindings
+title: Allwinner A10 Infrared Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index c3de96d10396..541325f900a1 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Device Tree Bindings
+title: Allwinner A10 Video Engine
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -48,6 +48,10 @@ properties:
 
   allwinner,sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
     description: Phandle to the device SRAM
 
   iommus:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index 8b568072a069..f1ccca35a790 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A31 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -42,6 +42,7 @@ properties:
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
+    description: Parallel input port, connect to a parallel sensor
 
     properties:
       endpoint:
@@ -59,7 +60,24 @@ properties:
         required:
           - bus-width
 
-    additionalProperties: false
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: "#/properties/port"
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 bridge input port
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
@@ -69,6 +87,12 @@ required:
   - clock-names
   - resets
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
 additionalProperties: false
 
 examples:
@@ -89,19 +113,25 @@ examples:
                       "ram";
         resets = <&ccu RST_BUS_CSI>;
 
-        port {
-            /* Parallel bus endpoint */
-            csi1_ep: endpoint {
-                remote-endpoint = <&adv7611_ep>;
-                bus-width = <16>;
-
-                /*
-                 * If hsync-active/vsync-active are missing,
-                 * embedded BT.656 sync is used.
-                 */
-                 hsync-active = <0>; /* Active low */
-                 vsync-active = <0>; /* Active low */
-                 pclk-sample = <1>;  /* Rising */
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                /* Parallel bus endpoint */
+                csi1_ep: endpoint {
+                    remote-endpoint = <&adv7611_ep>;
+                    bus-width = <16>;
+
+                    /*
+                     * If hsync-active/vsync-active are missing,
+                     * embedded BT.656 sync is used.
+                     */
+                    hsync-active = <0>; /* Active low */
+                    vsync-active = <0>; /* Active low */
+                    pclk-sample = <1>;  /* Rising */
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
new file mode 100644
index 000000000000..54e15ab8a7f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-csi2
+      - items:
+          - const: allwinner,sun8i-v3s-mipi-csi2
+          - const: allwinner,sun6i-a31-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-v3s-mipi-csi2",
+                     "allwinner,sun6i-a31-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_CSI>;
+
+        phys = <&dphy>;
+        phy-names = "dphy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov5648: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov5648_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi0: endpoint {
+                    remote-endpoint = <&csi0_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
index a258832d520c..c2f292dd01ed 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83T DE2 Rotate Device Tree Bindings
+title: Allwinner A83T DE2 Rotate
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
new file mode 100644
index 000000000000..3cac68a87ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a83t-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: MIPI-specific Clock
+      - description: Misc CSI Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: mipi
+      - const: misc
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-a83t-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI_SCLK>,
+                 <&ccu CLK_MIPI_CSI>,
+                 <&ccu CLK_CSI_MISC>;
+        clock-names = "bus", "mod", "mipi", "misc";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov8865: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov8865_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi: endpoint {
+                    remote-endpoint = <&csi_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index b80980b1908e..3ccd52164f5b 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-h3-deinterlace.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H3 Deinterlace Device Tree Bindings
+title: Allwinner H3 Deinterlace
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
index bee93bd84771..e551be5e680e 100644
--- a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic GE2D Acceleration Unit
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 5044c4bb94e0..b827edabcafa 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Video Decoder
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Maxime Jourdan <mjourdan@baylibre.com>
 
 description: |
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index d93aea6a0258..8d844f4312d1 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson AO-CEC Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
new file mode 100644
index 000000000000..a9d80eaeeeb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amphion,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amphion VPU codec IP
+
+maintainers:
+  - Ming Qian <ming.qian@nxp.com>
+  - Shijie Qin <shijie.qin@nxp.com>
+
+description: |-
+  The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present
+  on NXP i.MX8Q SoCs.
+
+properties:
+  $nodename:
+    pattern: "^vpu@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nxp,imx8qm-vpu
+          - nxp,imx8qxp-vpu
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^mailbox@[0-9a-f]+$":
+    description:
+      Each vpu encoder or decoder correspond a MU, which used for communication
+      between driver and firmware. Implement via mailbox on driver.
+    $ref: ../mailbox/fsl,mu.yaml#
+
+
+  "^vpu_core@[0-9a-f]+$":
+    description:
+      Each core correspond a decoder or encoder, need to configure them
+      separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
+      has one decoder and one encoder.
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nxp,imx8q-vpu-decoder
+              - nxp,imx8q-vpu-encoder
+
+      reg:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      mbox-names:
+        items:
+          - const: tx0
+          - const: tx1
+          - const: rx
+
+      mboxes:
+        description:
+          List of phandle of 2 MU channels for tx, 1 MU channel for rx.
+        maxItems: 3
+
+      memory-region:
+        description:
+          Phandle to the reserved memory nodes to be associated with the
+          remoteproc device. The reserved memory nodes should be carveout nodes,
+          and should be defined as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        items:
+          - description: region reserved for firmware image sections.
+          - description: region used for RPC shared memory between firmware and
+                         driver.
+
+    required:
+      - compatible
+      - reg
+      - power-domains
+      - mbox-names
+      - mboxes
+      - memory-region
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example for i.MX8QM platform:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    vpu: vpu@2c000000 {
+      compatible = "nxp,imx8qm-vpu";
+      ranges = <0x2c000000 0x2c000000 0x2000000>;
+      reg = <0x2c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      power-domains = <&pd IMX_SC_R_VPU>;
+
+      mu_m0: mailbox@2d000000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d000000 0x20000>;
+        interrupts = <0 472 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+      };
+
+      mu1_m0: mailbox@2d020000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d020000 0x20000>;
+        interrupts = <0 473 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+      };
+
+      mu2_m0: mailbox@2d040000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d040000 0x20000>;
+        interrupts = <0 474 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+      };
+
+      vpu_core0: vpu_core@2d080000 {
+        compatible = "nxp,imx8q-vpu-decoder";
+        reg = <0x2d080000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu_m0 0 0>,
+                 <&mu_m0 0 1>,
+                 <&mu_m0 1 0>;
+        memory-region = <&decoder_boot>, <&decoder_rpc>;
+      };
+
+      vpu_core1: vpu_core@2d090000 {
+        compatible = "nxp,imx8q-vpu-encoder";
+        reg = <0x2d090000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu1_m0 0 0>,
+                 <&mu1_m0 0 1>,
+                 <&mu1_m0 1 0>;
+        memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+      };
+
+      vpu_core2: vpu_core@2d0a0000 {
+        reg = <0x2d0a0000 0x10000>;
+        compatible = "nxp,imx8q-vpu-encoder";
+        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu2_m0 0 0>,
+                 <&mu2_m0 0 1>,
+                 <&mu2_m0 1 0>;
+        memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
index 36781ee4617f..c9d5adbc8c4a 100644
--- a/Documentation/devicetree/bindings/media/coda.yaml
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -65,7 +65,6 @@ properties:
   iram:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle pointing to the SRAM device node
-    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
deleted file mode 100644
index ce9a22689e53..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Samsung S5P/Exynos SoC series JPEG codec
-
-Required properties:
-
-- compatible	: should be one of:
-		  "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg",
-		  "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg",
-		  "samsung,exynos5433-jpeg";
-- reg		: address and length of the JPEG codec IP register set;
-- interrupts	: specifies the JPEG codec IP interrupt;
-- clock-names   : should contain:
-		   - "jpeg" for the core gate clock,
-		   - "sclk" for the special clock (optional).
-- clocks	: should contain the clock specifier and clock ID list
-		  matching entries in the clock-names property; from
-		  the common clock bindings.
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
deleted file mode 100644
index 1872688fa408..000000000000
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Samsung Exynos5 G-Scaler device
-
-G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
-
-Required properties:
-- compatible: should be one of
-	      "samsung,exynos5250-gsc"
-	      "samsung,exynos5420-gsc"
-	      "samsung,exynos5433-gsc"
-	      "samsung,exynos5-gsc" (deprecated)
-- reg: should contain G-Scaler physical address location and length.
-- interrupts: should contain G-Scaler interrupt number
-
-Optional properties:
-- samsung,sysreg: handle to syscon used to control the system registers to
-  set writeback input and destination
-
-Example:
-
-gsc_0:  gsc@13e00000 {
-	compatible = "samsung,exynos5250-gsc";
-	reg = <0x13e00000 0x1000>;
-	interrupts = <0 85 0>;
-};
-
-Aliases:
-Each G-Scaler node should have a numbered alias in the aliases node,
-in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
-to retrieve the device IDs using "of_alias_get_id()" call.
-
-Example:
-
-aliases {
-	gsc0 =&gsc_0;
-	gsc1 =&gsc_1;
-	gsc2 =&gsc_2;
-	gsc3 =&gsc_3;
-};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
deleted file mode 100644
index 108bf435b933..000000000000
--- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device-Tree bindings for GPIO IR receiver
-
-Required properties:
-	- compatible: should be "gpio-ir-receiver".
-	- gpios: specifies GPIO used for IR signal reception.
-
-Optional properties:
-	- linux,rc-map-name: see rc.txt file in the same
-	  directory.
-	- linux,autosuspend-period: autosuspend delay time,
-	  the unit is milisecond.
-
-Example node:
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		linux,rc-map-name = "rc-rc6-mce";
-		linux,autosuspend-period = <125>;
-	};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
new file mode 100644
index 000000000000..61072745b983
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO Based IR receiver
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    const: gpio-ir-receiver
+
+  gpios:
+    maxItems: 1
+
+  linux,autosuspend-period:
+    description: autosuspend delay time in milliseconds
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ir-receiver {
+        compatible = "gpio-ir-receiver";
+        gpios = <&gpio0 19 1>;
+        linux,rc-map-name = "rc-rc6-mce";
+        linux,autosuspend-period = <125>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
index c19d8391e2d5..7589d377c686 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -60,7 +60,8 @@ properties:
       enables hot-plug detection.
 
   default-input:
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
     description:
       Select which input is selected after reset.
 
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
index c2ba78116dbb..1d6af1bf9a6b 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -17,6 +17,7 @@ description: |
 properties:
   compatible:
     enum:
+      - aptina,mt9p006
       - aptina,mt9p031
       - aptina,mt9p031m
 
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
deleted file mode 100644
index b88dcdd41def..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9714 camera voice coil lens driver
-
-DW9174 is a 10-bit DAC with current sink capability. It is intended
-for driving voice coil lenses in camera modules.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9714"
-- reg: I²C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
new file mode 100644
index 000000000000..66229a3dc05d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
deleted file mode 100644
index c4701f1eaaf6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9807 voice coil lens driver
-
-DW9807 is a 10-bit DAC with current sink capability. It is intended for
-controlling voice coil lenses.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9807-vcm"
-- reg: I2C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
new file mode 100644
index 000000000000..aae246ca3fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2018, 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9807 voice coil lens driver
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+  DW9807 is a 10-bit DAC with current sink capability. It is intended for
+  controlling voice coil lenses.
+
+properties:
+  compatible:
+    const: dongwoon,dw9807-vcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lens@e {
+            compatible = "dongwoon,dw9807-vcm";
+            reg = <0x0e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
index 85a8877c2f38..1e2df8cf2937 100644
--- a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -49,7 +49,8 @@ properties:
     description: Definition of the regulator used for the VDDD power supply.
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
 
     properties:
       endpoint:
@@ -68,8 +69,11 @@ properties:
                   - const: 1
                   - const: 2
 
+          link-frequencies: true
+
         required:
           - data-lanes
+          - link-frequencies
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
new file mode 100644
index 000000000000..034a6e3466af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL79987 Analog to MIPI CSI-2 decoder
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of
+  receiving up to four analog stream and multiplexing them into up to four MIPI
+  CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl79987
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the RSTB pin (active high)
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the Power Down pin (active high)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input ports
+
+    required:
+      - port@0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl7998x_mipi@44 {
+        compatible = "isil,isl79987";
+        reg = <0x44>;
+        powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            isl79987_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&camera_0>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            endpoint {
+              remote-endpoint = <&camera_1>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 02f656e78700..90315e217003 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -70,6 +70,28 @@ properties:
       a remote serializer whose high-threshold noise immunity is not enabled
       is 100000 micro volts
 
+  maxim,gpio-poc:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    minItems: 2
+    maxItems: 2
+    description: |
+      Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+      Coax to the cameras and its associated polarity flag.
+
+      The property accepts an array of two unsigned integers, the first being
+      the gpio line index (0 or 1) and the second being the gpio line polarity
+      flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+      <include/dt-bindings/gpio/gpio.h>.
+
+      When the remote cameras power is controlled by one of the MAX9286 gpio
+      lines, this property has to be used to specify which line among the two
+      available ones controls the remote camera power enablement.
+
+      When this property is used it is not possible to register a gpio
+      controller as the gpio lines are controlled directly by the MAX9286 and
+      not available for consumers, nor the 'poc-supply' property should be
+      specified.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -165,7 +187,16 @@ required:
   - reg
   - ports
   - i2c-mux
-  - gpio-controller
+
+# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller'
+# are not allowed.
+if:
+  required:
+    - maxim,gpio-poc
+then:
+  properties:
+    poc-supply: false
+    gpio-controller: false
 
 additionalProperties: false
 
@@ -174,140 +205,174 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     i2c@e66d8000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      reg = <0 0xe66d8000>;
+        reg = <0 0xe66d8000>;
 
-      gmsl-deserializer@2c {
-        compatible = "maxim,max9286";
-        reg = <0x2c>;
-        poc-supply = <&camera_poc_12v>;
-        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
 
-        gpio-controller;
-        #gpio-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
 
-        maxim,reverse-channel-microvolt = <170000>;
+            maxim,reverse-channel-microvolt = <170000>;
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
+                port@0 {
+                    reg = <0>;
 
-            max9286_in0: endpoint {
-              remote-endpoint = <&rdacm20_out0>;
-            };
-          };
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
 
-          port@1 {
-            reg = <1>;
+                port@1 {
+                    reg = <1>;
 
-            max9286_in1: endpoint {
-              remote-endpoint = <&rdacm20_out1>;
-            };
-          };
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
 
-          port@2 {
-            reg = <2>;
+                port@2 {
+                    reg = <2>;
 
-            max9286_in2: endpoint {
-              remote-endpoint = <&rdacm20_out2>;
-            };
-          };
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
 
-          port@3 {
-            reg = <3>;
+                port@3 {
+                    reg = <3>;
 
-            max9286_in3: endpoint {
-              remote-endpoint = <&rdacm20_out3>;
-            };
-          };
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
 
-          port@4 {
-            reg = <4>;
+                port@4 {
+                    reg = <4>;
 
-            max9286_out: endpoint {
-              data-lanes = <1 2 3 4>;
-              remote-endpoint = <&csi40_in>;
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
             };
-          };
-        };
 
-        i2c-mux {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          i2c@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <0>;
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
 
-            camera@51 {
-              compatible = "imi,rdacm20";
-              reg = <0x51>, <0x61>;
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
 
-              port {
-                rdacm20_out0: endpoint {
-                  remote-endpoint = <&max9286_in0>;
-                };
-              };
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
 
-            };
-          };
+                    };
+                };
 
-          i2c@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <1>;
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
 
-            camera@52 {
-              compatible = "imi,rdacm20";
-              reg = <0x52>, <0x62>;
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
 
-              port {
-                rdacm20_out1: endpoint {
-                  remote-endpoint = <&max9286_in1>;
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
                 };
-              };
             };
-          };
-
-          i2c@2 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <2>;
-
-            camera@53 {
-              compatible = "imi,rdacm20";
-              reg = <0x53>, <0x63>;
+        };
 
-              port {
-                rdacm20_out2: endpoint {
-                  remote-endpoint = <&max9286_in2>;
+        /*
+        * Example of a deserializer that controls the camera Power over Coax
+        * through one of its gpio lines.
+        */
+        gmsl-deserializer@6c {
+            compatible = "maxim,max9286";
+            reg = <0x6c>;
+            enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+            /*
+            * The remote camera power is controlled by MAX9286 GPIO line #0.
+            * No 'poc-supply' nor 'gpio-controller' are specified.
+            */
+            maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+            /*
+            * Do not describe connections as they're the same as in the previous
+            * example.
+            */
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@4 {
+                    reg = <4>;
                 };
-              };
             };
-          };
 
-          i2c@3 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <3>;
-
-            camera@54 {
-              compatible = "imi,rdacm20";
-              reg = <0x54>, <0x64>;
-
-              port {
-                rdacm20_out3: endpoint {
-                  remote-endpoint = <&max9286_in3>;
-                };
-              };
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
             };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
new file mode 100644
index 000000000000..444f24838d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI
+  CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96712 can accommodate as many as
+  four remotely located sensors using industry-standard coax or STP
+  interconnects.
+
+  Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the
+  MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1
+  serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
+
+properties:
+  compatible:
+    const: maxim,max96712
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  enable-gpios: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+    required:
+      - port@4
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0 0xe6508000>;
+
+            gmsl0: gmsl-deserializer@49 {
+                    compatible = "maxim,max96712";
+                    reg = <0x49>;
+                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@4 {
+                                    reg = <4>;
+                                    max96712_out0: endpoint {
+                                            clock-lanes = <0>;
+                                            data-lanes = <1 2 3 4>;
+                                            remote-endpoint = <&csi40_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
new file mode 100644
index 000000000000..b617cc5c6a9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0521 MIPI CSI-2 sensor
+
+maintainers:
+  - Krzysztof Hałasa <khalasa@piap.pl>
+
+description: |-
+  The AR0521 is a raw CMOS image sensor with MIPI CSI-2 and
+  I2C-compatible control interface.
+
+properties:
+  compatible:
+    const: onnn,ar0521
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vaa-supply:
+    description:
+      Definition of the regulator used as analog (2.7 V) voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as digital core (1.2 V) voltage supply.
+
+  vdd_io-supply:
+    description:
+      Definition of the regulator used as digital I/O (1.8 V) voltage supply.
+
+  reset-gpios:
+    description: reset GPIO, usually active low
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vaa-supply
+  - vdd-supply
+  - vdd_io-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ar0521: camera-sensor@36 {
+                    compatible = "onnn,ar0521";
+                    reg = <0x36>;
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_mipi_camera>;
+                    clocks = <&clks IMX6QDL_CLK_CKO>;
+                    clock-names = "extclk";
+                    reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                    vaa-supply = <&reg_2p7v>;
+                    vdd-supply = <&reg_1p2v>;
+                    vdd_io-supply = <&reg_1p8v>;
+
+                    port {
+                           mipi_camera_to_mipi_csi2: endpoint {
+                                    remote-endpoint = <&mipi_csi2_in>;
+                                    data-lanes = <1 2 3 4>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..359dc08440a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+
+description: |
+  The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
+  The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5693
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8V.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8V.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2V.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5693: camera@36 {
+            compatible = "ovti,ov5693";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
index afcf70947f7e..26d1807d0bb6 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -32,6 +32,15 @@ properties:
     description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
     maxItems: 1
 
+  dovdd-supply:
+    description: Interface power supply.
+
+  avdd-supply:
+    description: Analog power supply.
+
+  dvdd-supply:
+    description: Digital power supply.
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
new file mode 100644
index 000000000000..9cfc0c7d23e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Read Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Read Direct Memory Access(RDMA) component used to do read DMA.
+  It contains one line buffer to store the sufficient pixel data, and
+  must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt8183-mdp3-rdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA clock
+      - description: RSZ clock
+
+  iommus:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: used for 1st data pipe from RDMA
+      - description: used for 2nd data pipe from RDMA
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_rdma0: mdp3-rdma0@14001000 {
+      compatible = "mediatek,mt8183-mdp3-rdma";
+      reg = <0x14001000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+               <&mmsys CLK_MM_MDP_RSZ1>;
+      iommus = <&iommu>;
+      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
new file mode 100644
index 000000000000..78f9de6192ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Resizer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to do frame resizing.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-rsz
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_rsz0: mdp3-rsz0@14003000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14003000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ0_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+    };
+
+    mdp3_rsz1: mdp3-rsz1@14004000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14004000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ1_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
new file mode 100644
index 000000000000..0baa77198fa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write DMA with Rotation
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wrot
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wrot0: mdp3-wrot0@14005000 {
+      compatible = "mediatek,mt8183-mdp3-wrot";
+      reg = <0x14005000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                            <CMDQ_EVENT_MDP_WROT0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WROT0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
new file mode 100644
index 000000000000..aa55ca65d6ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-dec
+      - mediatek,mt8183-vcodec-dec
+
+  reg:
+    maxItems: 12
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: vcodecpll
+      - const: univpll_d2
+      - const: clk_cci400_sel
+      - const: vdec_sel
+      - const: vdecpll
+      - const: vencpll
+      - const: venc_lt_sel
+      - const: vdec_bus_clk_src
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-dec
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-dec
+
+    then:
+      required:
+        - mediatek,vpu
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    vcodec_dec: vcodec@16000000 {
+      compatible = "mediatek,mt8173-vcodec-dec";
+      reg = <0x16000000 0x100>,   /*VDEC_SYS*/
+          <0x16020000 0x1000>,  /*VDEC_MISC*/
+          <0x16021000 0x800>,   /*VDEC_LD*/
+          <0x16021800 0x800>,   /*VDEC_TOP*/
+          <0x16022000 0x1000>,  /*VDEC_CM*/
+          <0x16023000 0x1000>,  /*VDEC_AD*/
+          <0x16024000 0x1000>,  /*VDEC_AV*/
+          <0x16025000 0x1000>,  /*VDEC_PP*/
+          <0x16026800 0x800>,   /*VP8_VD*/
+          <0x16027000 0x800>,   /*VP6_VD*/
+          <0x16027800 0x800>,   /*VP8_VL*/
+          <0x16028400 0x400>;   /*VP9_VD*/
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+      mediatek,vpu = <&vpu>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+      clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+                      <&topckgen CLK_TOP_CCI400_SEL>,
+                      <&topckgen CLK_TOP_VDEC_SEL>,
+                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
+                      <&apmixedsys CLK_APMIXED_VENCPLL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+                             <&topckgen CLK_TOP_UNIVPLL_D2>,
+                             <&topckgen CLK_TOP_VCODECPLL>;
+      assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
new file mode 100644
index 000000000000..32aee09aea33
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Encode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Encode is the video encode hardware present in Mediatek
+  SoCs which supports high resolution encoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-enc-vp8
+      - mediatek,mt8173-vcodec-enc
+      - mediatek,mt8183-vcodec-enc
+      - mediatek,mt8188-vcodec-enc
+      - mediatek,mt8192-vcodec-enc
+      - mediatek,mt8195-vcodec-enc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+
+    then:
+      required:
+        - mediatek,vpu
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8173-vcodec-enc
+            - mediatek,mt8192-vcodec-enc
+
+    then:
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_sel
+    else:  # for vp8 hw decoder
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_lt_sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    vcodec_enc_avc: vcodec@18002000 {
+      compatible = "mediatek,mt8173-vcodec-enc";
+      reg = <0x18002000 0x1000>;
+      interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_PORT_VENC_REC>,
+             <&iommu M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_PORT_VENC_NBM_WDMA>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      clock-names = "venc_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+    };
+
+    vcodec_enc_vp8: vcodec@19002000 {
+      compatible = "mediatek,mt8173-vcodec-enc-vp8";
+      reg =  <0x19002000 0x1000>;	/* VENC_LT_SYS */
+      interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      clock-names = "venc_lt_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
new file mode 100644
index 000000000000..c4f20acdc1f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -0,0 +1,293 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Mediatek Video Decode Accelerator With Multi Hardware
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities. Required
+  parent and child device node.
+
+  About the Decoder Hardware Block Diagram, please check below:
+
+    +------------------------------------------------+-------------------------------------+
+    |                                                |                                     |
+    |  input -> lat soc HW -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output  |
+    |            ||             ||                   |                     ||              |
+    +------------||-------------||-------------------+---------------------||--------------+
+                 ||     lat     ||                   |               core workqueue  <parent>
+    -------------||-------------||-------------------|---------------------||---------------
+                 ||<------------||----------------HW index---------------->||        <child>
+                 \/             \/                                         \/
+               +-------------------------------------------------------------+
+               |                          enable/disable                     |
+               |                 clk     power    irq    iommu               |
+               |                   (lat/lat soc/core0/core1)                 |
+               +-------------------------------------------------------------+
+
+  As above, there are parent and child devices, child mean each hardware. The child device
+  controls the information of each hardware independent which include clk/power/irq.
+
+  There are two workqueues in parent device: lat workqueue and core workqueue. They are used
+  to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer,
+  then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode
+  done. Core workqueue need to get lat buffer and output buffer, then enable core to decode,
+  writing the result to output buffer, disable hardware when core decode done. These two
+  hardwares will decode each frame cyclically.
+
+  For the smi common may not the same for each hardware, can't combine all hardware in one node,
+  or leading to iommu fault when access dram data.
+
+  Lat soc is a hardware which is related with some larb(local arbiter) ports. For mt8195
+  platform, there are some ports like RDMA, UFO in lat soc larb, need to enable its power and
+  clock when lat start to work, don't have interrupt.
+
+  mt8195: lat soc HW + lat HW + core HW
+  mt8192: lat HW + core HW
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-vcodec-dec
+      - mediatek,mt8186-vcodec-dec
+      - mediatek,mt8188-vcodec-dec
+      - mediatek,mt8195-vcodec-dec
+
+  reg:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The node of system control processor (SCP), using
+      the remoteproc & rpmsg framework.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  '^vcodec-lat@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - mediatek,mtk-vcodec-lat
+          - mediatek,mtk-vcodec-lat-soc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        maxItems: 5
+
+      clock-names:
+        items:
+          - const: sel
+          - const: soc-vdec
+          - const: soc-lat
+          - const: vdec
+          - const: top
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+  '^vcodec-core@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        const: mediatek,mtk-vcodec-core
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        maxItems: 5
+
+      clock-names:
+        items:
+          - const: sel
+          - const: soc-vdec
+          - const: soc-lat
+          - const: vdec
+          - const: top
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iommus
+  - mediatek,scp
+  - dma-ranges
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mtk-vcodec-lat
+
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8192-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+
+    bus@16000000 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0 0x16000000 0x16000000 0 0x40000>;
+
+        video-codec@16000000 {
+            compatible = "mediatek,mt8192-vcodec-dec";
+            mediatek,scp = <&scp>;
+            iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+            dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0 0 0 0x16000000 0 0x40000>;
+            reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+            vcodec-lat@10000 {
+                compatible = "mediatek,mtk-vcodec-lat";
+                reg = <0 0x10000 0 0x800>;
+                interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+            };
+
+            vcodec-core@25000 {
+                compatible = "mediatek,mtk-vcodec-core";
+                reg = <0 0x25000 0 0x1000>;
+                interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys CLK_VDEC_VDEC>,
+                    <&vdecsys CLK_VDEC_LAT>,
+                    <&vdecsys CLK_VDEC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
deleted file mode 100644
index 39c1028b2dfb..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Mediatek JPEG Decoder
-
-Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
-
-Required properties:
-- compatible : must be one of the following string:
-	"mediatek,mt8173-jpgdec"
-	"mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
-	"mediatek,mt2701-jpgdec"
-- reg : physical base address of the jpeg decoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgdec-smi" and "jpgdec".
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
new file mode 100644
index 000000000000..5e8d001492cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-jpgdec
+              - mediatek,mt2701-jpgdec
+      - items:
+          - enum:
+              - mediatek,mt7623-jpgdec
+          - const: mediatek,mt2701-jpgdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: jpgdec-smi
+      - const: jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegdec: jpegdec@15004000 {
+      compatible = "mediatek,mt2701-jpgdec";
+      reg = <0x15004000 0x1000>;
+      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+                <&imgsys CLK_IMG_JPGDEC>;
+      clock-names = "jpgdec-smi",
+                    "jpgdec";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+               <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
deleted file mode 100644
index 5e53c6ab52d0..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* MediaTek JPEG Encoder
-
-MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
-
-Required properties:
-- compatible : "mediatek,mt2701-jpgenc"
-  followed by "mediatek,mtk-jpgenc"
-- reg : physical base address of the JPEG encoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current SoCs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	jpegenc: jpegenc@1500a000 {
-		compatible = "mediatek,mt2701-jpgenc",
-			     "mediatek,mtk-jpgenc";
-		reg = <0 0x1500a000 0 0x1000>;
-		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_VENC>;
-		clock-names = "jpgenc";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
new file mode 100644
index 000000000000..fc727300b493
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-jpgenc
+          - mediatek,mt8183-jpgenc
+          - mediatek,mt8186-jpgenc
+      - const: mediatek,mtk-jpgenc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  dma-ranges:
+    maxItems: 1
+    description: |
+      Describes the physical address space of IOMMU maps to memory.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegenc: jpegenc@1500a000 {
+      compatible = "mediatek,mt2701-jpgenc",
+                   "mediatek,mtk-jpgenc";
+      reg = <0x1500a000 0x1000>;
+      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_VENC>;
+      clock-names = "jpgenc";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+               <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
deleted file mode 100644
index 665a9508708e..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Mediatek Video Codec
-
-Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
-supports high resolution encoding and decoding functionalities.
-
-Required properties:
-- compatible : must be one of the following string:
-  "mediatek,mt8173-vcodec-enc-vp8" for mt8173 vp8 encoder.
-  "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder.
-  "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
-  "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
-  "mediatek,mt8192-vcodec-enc" for MT8192 encoder.
-  "mediatek,mt8183-vcodec-dec" for MT8183 decoder.
-  "mediatek,mt8195-vcodec-enc" for MT8195 encoder.
-- reg : Physical base address of the video codec registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
-- clocks : list of clock specifiers, corresponding to entries in
-  the clock-names property.
-- clock-names: avc encoder must contain "venc_sel", vp8 encoder must
-  contain "venc_lt_sel", decoder must contain "vcodecpll", "univpll_d2",
-  "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel",
-  "vdec_bus_clk_src".
-- iommus : should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-- dma-ranges : describes the dma address range space that the codec hw access.
-One of the two following nodes:
-- mediatek,vpu : the node of the video processor unit, if using VPU.
-- mediatek,scp : the node of the SCP unit, if using SCP.
-
-
-Example:
-
-vcodec_dec: vcodec@16000000 {
-    compatible = "mediatek,mt8173-vcodec-dec";
-    reg = <0 0x16000000 0 0x100>,   /*VDEC_SYS*/
-          <0 0x16020000 0 0x1000>,  /*VDEC_MISC*/
-          <0 0x16021000 0 0x800>,   /*VDEC_LD*/
-          <0 0x16021800 0 0x800>,   /*VDEC_TOP*/
-          <0 0x16022000 0 0x1000>,  /*VDEC_CM*/
-          <0 0x16023000 0 0x1000>,  /*VDEC_AD*/
-          <0 0x16024000 0 0x1000>,  /*VDEC_AV*/
-          <0 0x16025000 0 0x1000>,  /*VDEC_PP*/
-          <0 0x16026800 0 0x800>,   /*VP8_VD*/
-          <0 0x16027000 0 0x800>,   /*VP6_VD*/
-          <0 0x16027800 0 0x800>,   /*VP8_VL*/
-          <0 0x16028400 0 0x400>;   /*VP9_VD*/
-    interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
-    iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
-    mediatek,vpu = <&vpu>;
-    power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
-    clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
-             <&topckgen CLK_TOP_UNIVPLL_D2>,
-             <&topckgen CLK_TOP_CCI400_SEL>,
-             <&topckgen CLK_TOP_VDEC_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL>,
-             <&apmixedsys CLK_APMIXED_VENCPLL>,
-             <&topckgen CLK_TOP_VENC_LT_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL_370P5>;
-    clock-names = "vcodecpll",
-                  "univpll_d2",
-                  "clk_cci400_sel",
-                  "vdec_sel",
-                  "vdecpll",
-                  "vencpll",
-                  "venc_lt_sel",
-                  "vdec_bus_clk_src";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
-                      <&topckgen CLK_TOP_CCI400_SEL>,
-                      <&topckgen CLK_TOP_VDEC_SEL>,
-                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
-                      <&apmixedsys CLK_APMIXED_VENCPLL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
-                             <&topckgen CLK_TOP_UNIVPLL_D2>,
-                             <&topckgen CLK_TOP_VCODECPLL>;
-    assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
-  };
-
-vcodec_enc_avc: vcodec@18002000 {
-    compatible = "mediatek,mt8173-vcodec-enc";
-    reg = <0 0x18002000 0 0x1000>;
-    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU>,
-             <&iommu M4U_PORT_VENC_REC>,
-             <&iommu M4U_PORT_VENC_BSDMA>,
-             <&iommu M4U_PORT_VENC_SV_COMV>,
-             <&iommu M4U_PORT_VENC_RD_COMV>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
-             <&iommu M4U_PORT_VENC_REF_LUMA>,
-             <&iommu M4U_PORT_VENC_REF_CHROMA>,
-             <&iommu M4U_PORT_VENC_NBM_RDMA>,
-             <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENC_SEL>;
-    clock-names = "venc_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
-  };
-
-vcodec_enc_vp8: vcodec@19002000 {
-    compatible = "mediatek,mt8173-vcodec-enc-vp8";
-    reg =  <0 0x19002000 0 0x1000>;	/* VENC_LT_SYS */
-    interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
-             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
-             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
-             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
-             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
-    clock-names = "venc_lt_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
-  };
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
new file mode 100644
index 000000000000..b3a345fc6464
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CSI2 Demux Controller (CSI2DC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  CSI2DC - Camera Serial Interface 2 Demux Controller
+
+  CSI2DC is a hardware block that receives incoming data from either from an
+  IDI interface or from a parallel bus interface.
+  It filters IDI packets based on their data type and virtual channel
+  identifier, then converts the byte stream to a pixel stream into a cross
+  clock domain towards a parallel interface that can be read by a sensor
+  controller.
+  IDI interface is Synopsys proprietary.
+  CSI2DC can act a simple bypass bridge if the incoming data is coming from
+  a parallel interface.
+
+  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
+  is connected at the output to a sensor controller and the data pipe is
+  accessible as a DMA slave port to a DMA controller.
+
+  CSI2DC supports a single 'port' node as a sink port with either Synopsys
+  32-bit IDI interface or a parallel interface.
+
+  CSI2DC supports one 'port' node as source port with parallel interface.
+  This is called video pipe.
+  This port has an 'endpoint' that can be connected to a sink port of another
+  controller (next in pipeline).
+
+  CSI2DC also supports direct access to the data through AHB, via DMA channel,
+  called data pipe.
+  For data pipe to be available, a dma controller and a dma channel must be
+  referenced.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-csi2dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    description:
+      CSI2DC must have two clocks to function correctly. One clock is the
+      peripheral clock for the inside functionality of the hardware block.
+      This is named 'pclk'. The second clock must be the cross domain clock,
+      in which CSI2DC will perform clock crossing. This clock must be fed
+      by the next controller in pipeline, which usually is a sensor controller.
+      Normally this clock should be given by this sensor controller who
+      is also a clock source. This clock is named 'scck', sensor controller clock.
+    items:
+      - const: pclk
+      - const: scck
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the input port.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+            description: Endpoint connected to input device
+
+            properties:
+              bus-type:
+                enum: [4, 5, 6]
+                default: 4
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              clock-noncontinuous:
+                type: boolean
+                description:
+                  Presence of this boolean property decides whether clock is
+                  continuous or noncontinuous.
+
+              remote-endpoint: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the output port.
+
+        properties:
+          endpoint:
+            unevaluatedProperties: false
+            $ref: video-interfaces.yaml#
+            description: Endpoint connected to output device
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+                default: 5
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              remote-endpoint: true
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+examples:
+  # Example for connecting to a parallel sensor controller block (video pipe)
+  # and the input is received from Synopsys IDI interface
+  - |
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_in: endpoint { /* input from IDI interface */
+                               bus-type = <4>; /* MIPI CSI2 D-PHY */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>; /* must be 1, second child port */
+                       csi2dc_out: endpoint {
+                               remote-endpoint = <&xisc_in>; /* output to sensor controller */
+                       };
+               };
+        };
+    };
+
+  # Example for connecting to a DMA master as an AHB slave
+  # and the input is received from Synopsys IDI interface
+  - |
+    #include <dt-bindings/dma/at91.h>
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>;
+        dma-names = "rx";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_input: endpoint { /* input from IDI interface */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
index 086e1430af4f..8b37fccab5e2 100644
--- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -67,7 +67,7 @@ properties:
           remote-endpoint: true
 
           bus-width:
-            enum: [8, 9, 10, 11, 12]
+            enum: [8, 9, 10, 11, 12, 14]
             default: 12
 
           hsync-active:
@@ -126,4 +126,3 @@ examples:
                 };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/media/nxp,dw100.yaml b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
new file mode 100644
index 000000000000..21910ff0e1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,dw100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP DW100 Dewarper core
+
+maintainers:
+  - Xavier Roumegue <xavier.roumegue@oss.nxp.com>
+
+description: |-
+  The Dewarp Engine provides high-performance dewarp processing for the
+  correction of the distortion that is introduced in images produced by fisheye
+  and wide angle lenses. It is implemented with a line/tile-cache based
+  architecture. With configurable address mapping look up tables and per tile
+  processing, it successfully generates a corrected output image.
+  The engine can be used to perform scaling, cropping and pixel format
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8mp-dw100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The AHB clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    dewarp: dwe@32e30000 {
+            compatible = "nxp,imx8mp-dw100";
+            reg = <0x32e30000 0x10000>;
+            interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                     <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+            clock-names = "axi", "ahb";
+            power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
index 1ef849dc74d7..03a23a26c4f3 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml#
+$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
@@ -22,9 +22,14 @@ description: |-
 
 properties:
   compatible:
-    enum:
-      - fsl,imx7-mipi-csi2
-      - fsl,imx8mm-mipi-csi2
+    oneOf:
+      - enum:
+          - fsl,imx7-mipi-csi2
+          - fsl,imx8mm-mipi-csi2
+      - items:
+          - enum:
+              - fsl,imx8mp-mipi-csi2
+          - const: fsl,imx8mm-mipi-csi2
 
   reg:
     maxItems: 1
@@ -81,14 +86,12 @@ properties:
               data-lanes:
                 description:
                   Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
index 5922a2795167..4f7b78265336 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - fsl,imx8mq-csi
           - fsl,imx7-csi
           - fsl,imx6ul-csi
       - items:
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 3cc6f42aeb76..3d9d1db37040 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX8QXP/QM JPEG decoder/encoder Device Tree Bindings
+title: i.MX8QXP/QM JPEG decoder/encoder
 
 maintainers:
   - Mirela Rabulea <mirela.rabulea@nxp.com>
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 9c04fa85ee5c..2a14e3b0e004 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -58,11 +58,11 @@ properties:
       req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset containing
-                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
-          maximum: 0xff
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset containing
+                        CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+            maximum: 0xff
 
   interconnects:
     maxItems: 1
@@ -87,14 +87,12 @@ properties:
 
             properties:
               data-lanes:
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
index 762be3f96ce9..7dc13a4b1805 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -5,7 +5,7 @@
 $id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs
+title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs
 
 maintainers:
   - Philipp Zabel <p.zabel@pengutronix.de>
@@ -15,33 +15,21 @@ description:
 
 properties:
   compatible:
-    const: nxp,imx8mq-vpu
+    oneOf:
+      - const: nxp,imx8mq-vpu
+        deprecated: true
+      - const: nxp,imx8mq-vpu-g1
+      - const: nxp,imx8mq-vpu-g2
+      - const: nxp,imx8mm-vpu-g1
 
   reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: ctrl
+    maxItems: 1
 
   interrupts:
-    maxItems: 2
-
-  interrupt-names:
-    items:
-      - const: g1
-      - const: g2
+    maxItems: 1
 
   clocks:
-    maxItems: 3
-
-  clock-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: bus
+    maxItems: 1
 
   power-domains:
     maxItems: 1
@@ -49,31 +37,33 @@ properties:
 required:
   - compatible
   - reg
-  - reg-names
   - interrupts
-  - interrupt-names
   - clocks
-  - clock-names
 
 additionalProperties: false
 
 examples:
   - |
         #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g1: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g1";
+                reg = <0x38300000 0x10000>;
+                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+        };
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
         #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        vpu: video-codec@38300000 {
-                compatible = "nxp,imx8mq-vpu";
-                reg = <0x38300000 0x10000>,
-                      <0x38310000 0x10000>,
-                      <0x38320000 0x10000>;
-                reg-names = "g1", "g2", "ctrl";
-                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-names = "g1", "g2";
-                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
-                clock-names = "g1", "g2", "bus";
-                power-domains = <&pgc_vpu>;
+        vpu_g2: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g2";
+                reg = <0x38310000 0x10000>;
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
         };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index 304908072d72..12ec3e1ea869 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -83,10 +83,6 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 1
-
               data-lanes:
                 description:
                   An array of physical data lanes indexes.
@@ -99,7 +95,6 @@ properties:
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -114,16 +109,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
index 59ab16ad12f1..2abb7d21c0d1 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
@@ -68,6 +68,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 38be41e932f0..6aeb3d6d02d5 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -105,10 +105,6 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 description:
                   An array of physical data lanes indexes.
@@ -121,7 +117,6 @@ properties:
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -136,16 +131,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -160,16 +150,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -184,16 +169,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
index 199f45217b4a..29d0cb6c6ebe 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
@@ -95,6 +95,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 90b4af2c9724..42ee3f06c6be 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -86,6 +86,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
index e2874683b4d5..cf361dd9de08 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
@@ -86,6 +86,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 841a1aafdd13..b28c8e17f158 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -84,6 +84,13 @@ properties:
       - const: vfe0
       - const: vfe1
 
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: vfe-mem
+
   iommus:
     maxItems: 4
 
@@ -111,16 +118,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -135,16 +137,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -159,16 +156,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -183,16 +175,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
index 33da7d3cfd38..45e3f58f52bd 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
@@ -104,6 +104,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 9ca5dfa7f226..f9a003882f84 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -105,15 +105,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -128,16 +124,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -152,15 +143,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -175,15 +162,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
@@ -203,9 +186,13 @@ properties:
       - const: vfe1
       - const: vfe_lite
 
-  vdda-supply:
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
     description:
-      Definition of the regulator used as analog power supply.
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
 
 required:
   - clock-names
@@ -217,7 +204,8 @@ required:
   - power-domains
   - reg
   - reg-names
-  - vdda-supply
+  - vdda-phy-supply
+  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -361,7 +349,8 @@ examples:
           "vfe1",
           "vfe_lite";
 
-        vdda-supply = <&reg_2v8>;
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l26a_1p2>;
 
         ports {
           #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
index 177bf81544b1..8edc8a2f43a5 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -81,6 +81,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
index 680f37726fdf..57d503373efe 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -96,6 +96,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..07a2af12f37d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,463 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8250-camss
+
+  clocks:
+    minItems: 37
+    maxItems: 37
+
+  clock-names:
+    items:
+      - const: cam_ahb_clk
+      - const: cam_hf_axi
+      - const: cam_sf_axi
+      - const: camnoc_axi
+      - const: camnoc_axi_src
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: slow_ahb_src
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_areg
+      - const: vfe1_ahb
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_areg
+      - const: vfe_lite_ahb
+      - const: vfe_lite_axi
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    minItems: 14
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    minItems: 8
+    maxItems: 8
+
+  interconnects:
+    minItems: 4
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_0_mnoc
+      - const: cam_sf_0_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac6a000 {
+            compatible = "qcom,sm8250-camss";
+
+            reg = <0 0xac6a000 0 0x2000>,
+                  <0 0xac6c000 0 0x2000>,
+                  <0 0xac6e000 0 0x1000>,
+                  <0 0xac70000 0 0x1000>,
+                  <0 0xac72000 0 0x1000>,
+                  <0 0xac74000 0 0x1000>,
+                  <0 0xacb4000 0 0xd000>,
+                  <0 0xacc3000 0 0xd000>,
+                  <0 0xacd9000 0 0x2200>,
+                  <0 0xacdb200 0 0x2200>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            vdda-phy-supply = <&vreg_l5a_0p88>;
+            vdda-pll-supply = <&vreg_l9a_1p2>;
+
+            interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid3",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_0_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_1_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "cam_ahb_clk",
+                          "cam_hf_axi",
+                          "cam_sf_axi",
+                          "camnoc_axi",
+                          "camnoc_axi_src",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "slow_ahb_src",
+                          "vfe0_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe0_areg",
+                          "vfe1_ahb",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe1_areg",
+                          "vfe_lite_ahb",
+                          "vfe_lite_axi",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            iommus = <&apps_smmu 0x800 0x400>,
+                     <&apps_smmu 0x801 0x400>,
+                     <&apps_smmu 0x840 0x400>,
+                     <&apps_smmu 0x841 0x400>,
+                     <&apps_smmu 0xC00 0x400>,
+                     <&apps_smmu 0xC01 0x400>,
+                     <&apps_smmu 0xC40 0x400>,
+                     <&apps_smmu 0xC41 0x400>;
+
+            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+                            <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_0_mnoc",
+                                 "cam_sf_0_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
index ebf8f3d866a5..4b7a12523dcf 100644
--- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -92,6 +92,7 @@ properties:
 
   video-firmware:
     type: object
+    additionalProperties: false
 
     description: |
       Firmware subnode is needed when the platform does not
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index d4c541c4b164..e732b7f3a635 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/rc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic Infrared Remote Controller Device Tree Bindings
+title: Generic Infrared Remote Controller
 
 maintainers:
   - Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -12,7 +12,7 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^ir(@[a-f0-9]+)?$"
+    pattern: "^ir(-receiver)?(@[a-f0-9]+)?$"
 
   linux,rc-map-name:
     description:
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index e6a036721082..b520d6c5c102 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -67,7 +67,10 @@ properties:
                 maxItems: 1
 
               data-lanes:
-                maxItems: 1
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
 
             required:
               - clock-lanes
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
index 990e9c1dbc43..7a8f32473852 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -17,6 +17,7 @@ description:
 properties:
   compatible:
     enum:
+      - renesas,r9a07g044-vsp2 # RZ/G2L
       - renesas,vsp1 # R-Car Gen2 and RZ/G1
       - renesas,vsp2 # R-Car Gen3 and RZ/G2
 
@@ -26,8 +27,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks:
-    maxItems: 1
+  clocks: true
+  clock-names: true
 
   power-domains:
     maxItems: 1
@@ -50,17 +51,43 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      items:
-        - const: renesas,vsp1
-then:
-  properties:
-    renesas,fcp: false
-else:
-  required:
-    - renesas,fcp
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,vsp1
+    then:
+      properties:
+        renesas,fcp: false
+    else:
+      required:
+        - renesas,fcp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-vsp2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Video clock
+        clock-names:
+          items:
+            - const: aclk
+            - const: pclk
+            - const: vclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
 
 examples:
   # R8A7790 (R-Car H2) VSP1-S
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
new file mode 100644
index 000000000000..81b26eb4cd35
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Hantro G1 VPU encoders implemented on Rockchip SoCs
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+description:
+  Hantro G1 video encode-only accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-vepu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3568-power.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vepu: video-codec@fdee0000 {
+            compatible = "rockchip,rk3568-vepu";
+            reg = <0x0 0xfdee0000 0x0 0x800>;
+            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+            clock-names = "aclk", "hclk";
+            iommus = <&vepu_mmu>;
+            power-domains = <&power RK3568_PD_RGA>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
index 089f11d21b25..08b02ec16755 100644
--- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/rockchip,vdec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip Video Decoder (VDec) Device Tree Bindings
+title: Rockchip Video Decoder (VDec)
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -18,7 +18,9 @@ properties:
     oneOf:
       - const: rockchip,rk3399-vdec
       - items:
-          - const: rockchip,rk3228-vdec
+          - enum:
+              - rockchip,rk3228-vdec
+              - rockchip,rk3328-vdec
           - const: rockchip,rk3399-vdec
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index d1489b177331..b3661d7d4357 100644
--- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -84,8 +84,27 @@ properties:
                 minItems: 1
                 maxItems: 4
 
-    required:
-      - port@0
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for input on the parallel interface
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+        required:
+          - bus-type
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index bacb60a34989..6cc4d3e5a61d 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -23,6 +23,7 @@ properties:
           - rockchip,rk3328-vpu
           - rockchip,rk3399-vpu
           - rockchip,px30-vpu
+          - rockchip,rk3568-vpu
       - items:
           - const: rockchip,rk3188-vpu
           - const: rockchip,rk3066-vpu
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
new file mode 100644
index 000000000000..878397830a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Seung-Woo Kim <sw0312.kim@samsung.com
+
+description:
+  G-Scaler is used for scaling and color space conversion on Samsung Exynos
+  SoCs.
+
+  Each G-Scaler node should have a numbered alias in the aliases node, in the
+  form of gscN, N = 0...3.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+          - const: samsung,exynos5-gsc
+      - enum:
+          - samsung,exynos5433-gsc
+      - const: samsung,exynos5-gsc
+        deprecated: True
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon used to control the system registers to set writeback input and destination.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-gsc
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: gscl
+    else:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: aclk_gsclbend
+            - const: gsd
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-scaler@13e00000 {
+        compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+        reg = <0x13e00000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_gsc>;
+        clocks = <&clock CLK_GSCL0>;
+        clock-names = "gscl";
+        iommus = <&sysmmu_gsc0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
new file mode 100644
index 000000000000..e28d6ec56c0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5pv210-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos SoC JPEG codec
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-jpeg
+      - samsung,exynos3250-jpeg
+      - samsung,exynos4210-jpeg
+      - samsung,exynos4212-jpeg
+      - samsung,exynos5420-jpeg
+      - samsung,exynos5433-jpeg
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-jpeg
+              - samsung,exynos4210-jpeg
+              - samsung,exynos4212-jpeg
+              - samsung,exynos5420-jpeg
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: jpeg
+            - const: sclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: sclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    codec@15020000 {
+        compatible = "samsung,exynos5433-jpeg";
+        reg = <0x15020000 0x10000>;
+        interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+        clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+                 <&cmu_mscl CLK_SCLK_JPEG>;
+        iommus = <&sysmmu_jpeg>;
+        power-domains = <&pd_mscl>;
+    };
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 66c5d392fa75..f8e4d260d10a 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,cal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
@@ -48,6 +48,10 @@ properties:
 
   ti,camerrx-control:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to device control module
+          - description: offset to the control_camerarx_core register
     description:
       phandle to the device control module and offset to the
       control_camerarx_core register
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
index ef473f287399..7fa8a367ed22 100644
--- a/Documentation/devicetree/bindings/media/ti,vpe.yaml
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,vpe.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings
+title: Texas Instruments DRA7x Video Processing Engine (VPE)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
index 4391dce2caee..68c3b9871cf3 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.yaml
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -93,6 +93,7 @@ properties:
       - 4 # MIPI CSI-2 D-PHY
       - 5 # Parallel
       - 6 # BT.656
+      - 7 # DPI
     description:
       Data bus type.
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
new file mode 100644
index 000000000000..4b072c879b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,brcmstb-memc-ddr-rev-b.1.x
+          - brcm,brcmstb-memc-ddr-rev-b.2.0
+          - brcm,brcmstb-memc-ddr-rev-b.2.1
+          - brcm,brcmstb-memc-ddr-rev-b.2.2
+          - brcm,brcmstb-memc-ddr-rev-b.2.3
+          - brcm,brcmstb-memc-ddr-rev-b.2.5
+          - brcm,brcmstb-memc-ddr-rev-b.2.6
+          - brcm,brcmstb-memc-ddr-rev-b.2.7
+          - brcm,brcmstb-memc-ddr-rev-b.2.8
+          - brcm,brcmstb-memc-ddr-rev-b.3.0
+          - brcm,brcmstb-memc-ddr-rev-b.3.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.0
+          - brcm,brcmstb-memc-ddr-rev-c.1.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.2
+          - brcm,brcmstb-memc-ddr-rev-c.1.3
+          - brcm,brcmstb-memc-ddr-rev-c.1.4
+      - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
index 769f13250047..08cbdcddfead 100644
--- a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: DDR PHY Front End (DPFE) for Broadcom STB
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Markus Mayer <mmayer@broadcom.com>
 
 properties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
new file mode 100644
index 000000000000..f81fb866e319
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 000000000000..1daa66592477
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr2-timings
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tDQSCK-max:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c in pico seconds.
+
+  tDQSCK-max-derated:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+      seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tRAS-max-ns:
+    description: |
+      Row active time in nano seconds.
+
+  tRAS-min:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tZQCL:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Long calibration time in pico seconds.
+
+  tZQCS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Short calibration time in pico seconds.
+
+  tZQinit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Initialization calibration time in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    timings {
+        compatible = "jedec,lpddr2-timings";
+        min-freq = <10000000>;
+        max-freq = <400000000>;
+        tCKESR = <15000>;
+        tDQSCK-max = <5500>;
+        tFAW = <50000>;
+        tRAS-max-ns = <70000>;
+        tRAS-min = <42000>;
+        tRPab = <21000>;
+        tRCD = <18000>;
+        tRRD = <10000>;
+        tRTP = <7500>;
+        tWR = <15000>;
+        tWTR = <7500>;
+        tXP = <7500>;
+        tZQCL = <360000>;
+        tZQCS = <90000>;
+        tZQinit = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
index 25ed0266f6dd..9d78f140609b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
@@ -30,12 +30,26 @@ properties:
     maximum: 255
     description: |
       Revision 1 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
 
   revision-id2:
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     description: |
       Revision 2 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
+    minItems: 2
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 255
 
   density:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -142,14 +156,12 @@ properties:
 
 patternProperties:
   "^lpddr2-timings":
-    type: object
+    $ref: jedec,lpddr2-timings.yaml
     description: |
       The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
       "lpddr2-timings" provides AC timing parameters of the device for
       a given speed-bin. The user may provide the timings for as many
-      speed-bins as is required. Please see Documentation/devicetree/
-      bindings/memory-controllers/ddr/lpddr2-timings.txt for more information
-      on "lpddr2-timings".
+      speed-bins as is required.
 
 required:
   - compatible
@@ -164,8 +176,7 @@ examples:
         compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
         density = <2048>;
         io-width = <32>;
-        revision-id1 = <1>;
-        revision-id2 = <0>;
+        revision-id = <1 0>;
 
         tRPab-min-tck = <3>;
         tRCD-min-tck = <3>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 000000000000..5c6512c1e1e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr3-timings
+
+  reg:
+    maxItems: 1
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+      Property is deprecated, use max-freq.
+    deprecated: true
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKE:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tMRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode register set command delay in pico seconds.
+
+  tR2R-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+  tRAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRFC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Refresh Cycle time in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRPpb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (single banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tW2W-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tXSR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 000000000000..48908a19473c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - samsung,K3QF2F20DB
+      - const: jedec,lpddr3
+
+  '#address-cells':
+    const: 1
+    deprecated: true
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Density in megabits of SDRAM chip.
+    enum:
+      - 4096
+      - 8192
+      - 16384
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      IO bus width in bits of SDRAM chip.
+    enum:
+      - 32
+      - 16
+
+  manufacturer-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Manufacturer ID value read from Mode Register 5.  The property is
+      deprecated, manufacturer should be derived from the compatible.
+    deprecated: true
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 255
+    description: |
+      Revision value of SDRAM chip read from Mode Registers 6 and 7.
+
+  '#size-cells':
+    const: 0
+    deprecated: true
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles.
+
+  tDQSCK-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      DQS output data access time from CK_t/CK_c in terms of number of clock
+      cycles.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Four-bank activate window in terms of number of clock cycles.
+
+  tMRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Mode register set command delay in terms of number of clock cycles.
+
+  tR2R-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tRAS-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Row active time in terms of number of clock cycles.
+
+  tRC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles.
+
+  tRFC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Refresh Cycle time in terms of number of clock cycles.
+
+  tRL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+     READ data latency in terms of number of clock cycles.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+
+  tRPpb-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (single banks) in terms of number of clock cycles.
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Active bank A to active bank B in terms of number of clock cycles.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles.
+
+  tW2W-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tWL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE data latency in terms of number of clock cycles.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE recovery time in terms of number of clock cycles.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles.
+
+  tXSR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1023
+    description: |
+      SELF REFRESH exit to next valid command delay in terms of number of clock
+      cycles.
+
+patternProperties:
+  "^timings((-[0-9])+|(@[0-9a-f]+))?$":
+    $ref: jedec,lpddr3-timings.yaml
+    description: |
+      The lpddr3 node may have one or more child nodes with timings.
+      Each timing node provides AC timing parameters of the device for a given
+      speed-bin. The user may provide the timings for as many speed-bins as is
+      required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+        density = <16384>;
+        io-width = <32>;
+
+        tCKE-min-tck = <2>;
+        tCKESR-min-tck = <2>;
+        tDQSCK-min-tck = <5>;
+        tFAW-min-tck = <5>;
+        tMRD-min-tck = <5>;
+        tR2R-C2C-min-tck = <0>;
+        tRAS-min-tck = <5>;
+        tRC-min-tck = <6>;
+        tRCD-min-tck = <3>;
+        tRFC-min-tck = <17>;
+        tRL-min-tck = <14>;
+        tRPab-min-tck = <2>;
+        tRPpb-min-tck = <2>;
+        tRRD-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tW2W-C2C-min-tck = <0>;
+        tWL-min-tck = <8>;
+        tWR-min-tck = <7>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tXSR-min-tck = <12>;
+
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
deleted file mode 100644
index 9ceb19e0c7fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
-
-Required properties:
-- compatible : Should be "jedec,lpddr2-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds). Parameters with
-a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
-- tRCD
-- tWR
-- tRAS-min
-- tRRD
-- tWTR
-- tXP
-- tRTP
-- tDQSCK-max
-- tFAW
-- tZQCS
-- tZQinit
-- tRPab
-- tZQCL
-- tCKESR
-- tRAS-max-ns
-- tDQSCK-max-derated
-
-Example:
-
-timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-	compatible	= "jedec,lpddr2-timings";
-	min-freq	= <10000000>;
-	max-freq	= <400000000>;
-	tRPab		= <21000>;
-	tRCD		= <18000>;
-	tWR		= <15000>;
-	tRAS-min	= <42000>;
-	tRRD		= <10000>;
-	tWTR		= <7500>;
-	tXP		= <7500>;
-	tRTP		= <7500>;
-	tCKESR		= <15000>;
-	tDQSCK-max	= <5500>;
-	tFAW		= <50000>;
-	tZQCS		= <90000>;
-	tZQCL		= <360000>;
-	tZQinit		= <1000000>;
-	tRAS-max-ns	= <70000>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-	compatible	= "jedec,lpddr3-timings";
-	reg		= <800000000>; /* workaround: it shows max-freq */
-	min-freq	= <100000000>;
-	tRFC		= <65000>;
-	tRRD		= <6000>;
-	tRPab		= <12000>;
-	tRPpb		= <12000>;
-	tRCD		= <10000>;
-	tRC		= <33750>;
-	tRAS		= <23000>;
-	tWTR		= <3750>;
-	tWR		= <7500>;
-	tRTP		= <3750>;
-	tW2W-C2C	= <0>;
-	tR2R-C2C	= <0>;
-	tFAW		= <25000>;
-	tXSR		= <70000>;
-	tXP		= <3750>;
-	tCKE		= <3750>;
-	tCKESR		= <3750>;
-	tMRD		= <7000>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
deleted file mode 100644
index 031af5fb0379..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
-  Example "<vendor>,<type>" values:
-    "samsung,K3QF2F20DB"
-
-- density  : <u32> representing density in Mb (Mega bits)
-- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
-- #address-cells: Must be set to 1
-- #size-cells: Must be set to 0
-
-Optional properties:
-
-- manufacturer-id : <u32>     Manufacturer ID value read from Mode Register 5
-- revision-id     : <u32 u32> Revision IDs read from Mode Registers 6 and 7
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRFC-min-tck
-- tRRD-min-tck
-- tRPab-min-tck
-- tRPpb-min-tck
-- tRCD-min-tck
-- tRC-min-tck
-- tRAS-min-tck
-- tWTR-min-tck
-- tWR-min-tck
-- tRTP-min-tck
-- tW2W-C2C-min-tck
-- tR2R-C2C-min-tck
-- tWL-min-tck
-- tDQSCK-min-tck
-- tRL-min-tck
-- tFAW-min-tck
-- tXSR-min-tck
-- tXP-min-tck
-- tCKE-min-tck
-- tCKESR-min-tck
-- tMRD-min-tck
-
-Child nodes:
-- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
-  "lpddr3-timings" provides AC timing parameters of the device for
-  a given speed-bin. Please see
-  Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
-  for more information on "lpddr3-timings"
-
-Example:
-
-samsung_K3QF2F20DB: lpddr3 {
-	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
-	density		= <16384>;
-	io-width	= <32>;
-	manufacturer-id = <1>;
-	revision-id     = <123 234>;
-	#address-cells	= <1>;
-	#size-cells	= <0>;
-
-	tRFC-min-tck		= <17>;
-	tRRD-min-tck		= <2>;
-	tRPab-min-tck		= <2>;
-	tRPpb-min-tck		= <2>;
-	tRCD-min-tck		= <3>;
-	tRC-min-tck		= <6>;
-	tRAS-min-tck		= <5>;
-	tWTR-min-tck		= <2>;
-	tWR-min-tck		= <7>;
-	tRTP-min-tck		= <2>;
-	tW2W-C2C-min-tck	= <0>;
-	tR2R-C2C-min-tck	= <0>;
-	tWL-min-tck		= <8>;
-	tDQSCK-min-tck		= <5>;
-	tRL-min-tck		= <14>;
-	tFAW-min-tck		= <5>;
-	tXSR-min-tck		= <12>;
-	tXP-min-tck		= <2>;
-	tCKE-min-tck		= <2>;
-	tCKESR-min-tck		= <2>;
-	tMRD-min-tck		= <5>;
-
-	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-		compatible	= "jedec,lpddr3-timings";
-		/* workaround: 'reg' shows max-freq */
-		reg		= <800000000>;
-		min-freq	= <100000000>;
-		tRFC		= <65000>;
-		tRRD		= <6000>;
-		tRPab		= <12000>;
-		tRPpb		= <12000>;
-		tRCD		= <10000>;
-		tRC		= <33750>;
-		tRAS		= <23000>;
-		tWTR		= <3750>;
-		tWR		= <7500>;
-		tRTP		= <3750>;
-		tW2W-C2C	= <0>;
-		tR2R-C2C	= <0>;
-		tFAW		= <25000>;
-		tXSR		= <70000>;
-		tXP		= <3750>;
-		tCKE		= <3750>;
-		tCKESR		= <3750>;
-		tMRD		= <7000>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
index af5147f9da72..84f778a99546 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
@@ -25,12 +25,6 @@ properties:
           - const: fsl,qoriq-memory-controller
       - enum:
           - fsl,bsc9132-memory-controller
-          - fsl,8540-memory-controller
-          - fsl,8541-memory-controller
-          - fsl,8544-memory-controller
-          - fsl,8548-memory-controller
-          - fsl,8555-memory-controller
-          - fsl,8568-memory-controller
           - fsl,mpc8536-memory-controller
           - fsl,mpc8540-memory-controller
           - fsl,mpc8541-memory-controller
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
new file mode 100644
index 000000000000..3be1db30bf41
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  NXP's integrated flash controller (IFC) is an advanced version of the
+  enhanced local bus controller which includes similar programming and signal
+  interfaces with an extended feature set. The IFC provides access to multiple
+  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+  SRAM and other memories where address and data are shared on a bus.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    const: fsl,ifc
+
+  "#address-cells":
+    enum: [2, 3]
+    description: |
+      Should be either two or three.  The first cell is the chipselect
+      number, and the remaining cells are the offset into the chipselect.
+
+  "#size-cells":
+    enum: [1, 2]
+    description: |
+      Either one or two, depending on how large each chipselect can be.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      IFC may have one or two interrupts.  If two interrupt specifiers are
+      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
+      that interrupt reports both types of event.
+
+  little-endian:
+    type: boolean
+    description: |
+      If this property is absent, the big-endian mode will be in use as default
+      for registers.
+
+  ranges:
+    description: |
+      Each range corresponds to a single chipselect, and covers the entire
+      access window as configured.
+
+patternProperties:
+  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    description: |
+      Child device nodes describe the devices connected to IFC such as NOR (e.g.
+      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+      like FPGAs, CPLDs, etc.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@ffe1e000 {
+            compatible = "fsl,ifc";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0x0 0xffe1e000 0 0x2000>;
+            interrupts = <16 2 19 2>;
+            little-endian;
+
+            /* NOR, NAND Flashes and CPLD on board */
+            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
+                     <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+            flash@0,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "cfi-flash";
+                reg = <0x0 0x0 0x2000000>;
+                bank-width = <2>;
+                device-width = <1>;
+
+                partition@0 {
+                    /* 32MB for user data */
+                    reg = <0x0 0x02000000>;
+                    label = "NOR Data";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
deleted file mode 100644
index 89427b018ba7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Integrated Flash Controller
-
-Properties:
-- name : Should be ifc
-- compatible : should contain "fsl,ifc". The version of the integrated
-               flash controller can be found in the IFC_REV register at
-               offset zero.
-
-- #address-cells : Should be either two or three.  The first cell is the
-                   chipselect number, and the remaining cells are the
-                   offset into the chipselect.
-- #size-cells : Either one or two, depending on how large each chipselect
-                can be.
-- reg : Offset and length of the register set for the device
-- interrupts: IFC may have one or two interrupts.  If two interrupt
-              specifiers are present, the first is the "common"
-              interrupt (CM_EVTER_STAT), and the second is the NAND
-              interrupt (NAND_EVTER_STAT).  If there is only one,
-              that interrupt reports both types of event.
-
-- little-endian : If this property is absent, the big-endian mode will
-                  be in use as default for registers.
-
-- ranges : Each range corresponds to a single chipselect, and covers
-           the entire access window as configured.
-
-Child device nodes describe the devices connected to IFC such as NOR (e.g.
-cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
-like FPGAs, CPLDs, etc.
-
-Example:
-
-	ifc@ffe1e000 {
-		compatible = "fsl,ifc", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x0 0xffe1e000 0 0x2000>;
-		interrupts = <16 2 19 2>;
-		little-endian;
-
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xffa00000 0x00010000
-			  0x3 0x0 0x0 0xffb00000 0x00020000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 32MB for user data */
-				reg = <0x0 0x02000000>;
-				label = "NOR Data";
-			};
-		};
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-		};
-
-		cpld@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010rdb-cpld";
-			reg = <0x3 0x0 0x000001f>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
index 445e46feda69..519b123116dc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: i.MX8M DDR Controller
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   The DDRC block is integrated in i.MX8M for interfacing with DDR based
@@ -47,7 +47,8 @@ properties:
       - const: apb
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
 required:
   - reg
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
new file mode 100644
index 000000000000..b8ed52a44d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 255
+
+  ingenic,nemc-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    description: Specifies the bus width in bits.
+
+  ingenic,nemc-tAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address setup time in nanoseconds.
+
+  ingenic,nemc-tAH:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address hold time in nanoseconds.
+
+  ingenic,nemc-tBP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burst pitch time in nanoseconds.
+
+  ingenic,nemc-tAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address wait time in nanoseconds.
+
+  ingenic,nemc-tSTRV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Static memory recovery time in nanoseconds.
+
+required:
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
index 24f9e1982028..dd13a5106d6c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -39,38 +39,6 @@ properties:
 patternProperties:
   ".*@[0-9]+$":
     type: object
-    properties:
-      reg:
-        minItems: 1
-        maxItems: 255
-
-      ingenic,nemc-bus-width:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [8, 16]
-        description: Specifies the bus width in bits.
-
-      ingenic,nemc-tAS:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address setup time in nanoseconds.
-
-      ingenic,nemc-tAH:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address hold time in nanoseconds.
-
-      ingenic,nemc-tBP:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Burst pitch time in nanoseconds.
-
-      ingenic,nemc-tAW:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address wait time in nanoseconds.
-
-      ingenic,nemc-tSTRV:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Static memory recovery time in nanoseconds.
-
-    required:
-      - reg
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
index 14a6bc8f421f..9249624c4fa0 100644
--- a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
@@ -8,7 +8,7 @@ title: Marvell MVEBU SDRAM controller
 
 maintainers:
   - Jan Luebbe <jlu@pengutronix.de>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
index 85e02854f083..6ccdaf99c778 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: mediatek,mt7621-memc
+    items:
+      - const: mediatek,mt7621-memc
+      - const: syscon
 
   reg:
     maxItems: 1
@@ -25,6 +27,6 @@ additionalProperties: false
 examples:
   - |
     memory-controller@5000 {
-        compatible = "mediatek,mt7621-memc";
+        compatible = "mediatek,mt7621-memc", "syscon";
         reg = <0x5000 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 3a82b0b27fa0..a8fda30cccbb 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -32,9 +32,13 @@ properties:
           - mediatek,mt2701-smi-common
           - mediatek,mt2712-smi-common
           - mediatek,mt6779-smi-common
+          - mediatek,mt6795-smi-common
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
+          - mediatek,mt8188-smi-common-vdo
+          - mediatek,mt8188-smi-common-vpp
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
@@ -88,10 +92,9 @@ allOf:
               - mediatek,mt2701-smi-common
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
@@ -108,10 +111,9 @@ allOf:
       required:
         - mediatek,smi
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
@@ -127,16 +129,16 @@ allOf:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 4
-            maxItems: 4
+        clocks:
+          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: apb
@@ -144,12 +146,20 @@ allOf:
             - const: gals0
             - const: gals1
 
-    else:  # for gen2 HW that don't have gals
+  - if:  # for gen2 HW that don't have gals
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        compatible:
+          enum:
+            - mediatek,mt2712-smi-common
+            - mediatek,mt6795-smi-common
+            - mediatek,mt8167-smi-common
+            - mediatek,mt8173-smi-common
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..5f4ac3609887 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -20,9 +20,12 @@ properties:
           - mediatek,mt2701-smi-larb
           - mediatek,mt2712-smi-larb
           - mediatek,mt6779-smi-larb
+          - mediatek,mt6795-smi-larb
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
+          - mediatek,mt8188-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -52,7 +55,7 @@ properties:
     maxItems: 1
 
   mediatek,smi:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: a phandle to the smi_common node.
 
   mediatek,larb-id:
@@ -75,15 +78,17 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
+            - mediatek,mt8188-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
@@ -91,10 +96,9 @@ allOf:
 
     else:
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
@@ -108,7 +112,8 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
+              - mediatek,mt8186-smi-larb
+              - mediatek,mt8188-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 13c4c82fd0d3..935d63d181d9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -34,8 +34,12 @@ properties:
           - nvidia,tegra234-mc
 
   reg:
-    minItems: 1
-    maxItems: 3
+    minItems: 6
+    maxItems: 18
+
+  reg-names:
+    minItems: 6
+    maxItems: 18
 
   interrupts:
     items:
@@ -142,7 +146,17 @@ allOf:
     then:
       properties:
         reg:
-          maxItems: 1
+          maxItems: 6
+          description: 5 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
 
   - if:
       properties:
@@ -151,7 +165,29 @@ allOf:
     then:
       properties:
         reg:
-          minItems: 3
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
 
   - if:
       properties:
@@ -160,13 +196,36 @@ allOf:
     then:
       properties:
         reg:
-          minItems: 3
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
 
 additionalProperties: false
 
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts
   - "#address-cells"
   - "#size-cells"
@@ -182,7 +241,13 @@ examples:
 
         memory-controller@2c00000 {
             compatible = "nvidia,tegra186-mc";
-            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+                  <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+                  <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+                  <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+                  <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+                  <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+            reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
             interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
             #address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
index 9566b3421f03..0c511ab906bf 100644
--- a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The DDR controller of the AR7xxx and AR9xxx families provides an interface to
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml
deleted file mode 100644
index 2b18cef99511..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml
+++ /dev/null
@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: H8/300 bus controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-  - Yoshinori Sato <ysato@users.sourceforge.jp>
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - renesas,h8300h-bsc
-          - renesas,h8s-bsc
-      - const: renesas,h8300-bsc
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@fee01e {
-        compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
-        reg = <0xfee01e 8>;
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index 294f1036420d..645249ea21d1 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -31,16 +31,23 @@ properties:
               - renesas,r8a774b1-rpc-if       # RZ/G2N
               - renesas,r8a774c0-rpc-if       # RZ/G2E
               - renesas,r8a774e1-rpc-if       # RZ/G2H
+              - renesas,r8a7795-rpc-if        # R-Car H3
+              - renesas,r8a7796-rpc-if        # R-Car M3-W
+              - renesas,r8a77961-rpc-if       # R-Car M3-W+
+              - renesas,r8a77965-rpc-if       # R-Car M3-N
               - renesas,r8a77970-rpc-if       # R-Car V3M
               - renesas,r8a77980-rpc-if       # R-Car V3H
+              - renesas,r8a77990-rpc-if       # R-Car E3
               - renesas,r8a77995-rpc-if       # R-Car D3
               - renesas,r8a779a0-rpc-if       # R-Car V3U
           - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2{E,H,M,N} device
 
       - items:
           - enum:
+              - renesas,r9a07g043-rpc-if      # RZ/G2UL
               - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
-          - const: renesas,rzg2l-rpc-if       # RZ/G2L family
+              - renesas,r9a07g054-rpc-if      # RZ/V2L
+          - const: renesas,rzg2l-rpc-if
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
new file mode 100644
index 000000000000..fb4920397d08
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# %YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dmc
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Node to get DDR loading. Refer to
+      Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dmc_clk
+
+  operating-points-v2: true
+
+  center-supply:
+    description:
+      DMC regulator supply.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+  interrupts:
+    maxItems: 1
+    description:
+      The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
+      finishes, a DCF interrupt is triggered.
+
+  rockchip,ddr3_speed_bin:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
+      DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
+      datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
+      being used.
+
+  rockchip,pd_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the PD_IDLE value. Defines the power-down idle period in which
+      memories are placed into power-down mode if bus is idle for PD_IDLE DFI
+      clock cycles.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the SR_IDLE value. Defines the self-refresh idle period in
+      which memories are placed into self-refresh mode if bus is idle for
+      SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
+      See also rockchip,sr-idle-ns.
+    default: 0
+
+  rockchip,sr_mc_gate_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the memory self-refresh and controller clock gating idle period.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
+      cycles.
+      See also rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd_lite_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
+      only.
+      See also rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle * DFI clock cycles.
+      See also rockchip,standby-idle-ns.
+
+  rockchip,dram_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
+      than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
+      Note: if DLL was bypassed, the odt will also stop working.
+
+  rockchip,phy_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
+      is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+      Note: PHY DLL and PHY ODT are independent.
+
+  rockchip,auto_pd_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the auto PD disable frequency in MHz.
+
+  rockchip,ddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is DDR3, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,ddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 40
+
+  rockchip,ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 120
+
+  rockchip,phy_ddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the phy side CA line
+      (incluing command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side ODT
+      strength.
+    default: 240
+
+  rockchip,lpddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR3, this parameter defines then ODT disable
+      frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
+      ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 34
+
+  rockchip,lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 240
+
+  rockchip,phy_lpddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When dram type is LPDDR3, this parameter define the phy side odt
+      strength, default value is 240.
+
+  rockchip,lpddr4_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr4_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 60
+
+  rockchip,lpddr4_dq_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      DQS/DQ line strength in ohms.
+    default: 40
+
+  rockchip,lpddr4_ca_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      CA line strength in ohms.
+    default: 40
+
+  rockchip,phy_lpddr4_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
+      (including command address line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr4_ck_cs_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side clock
+      line and CS line drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
+      strength.
+    default: 60
+
+  rockchip,pd-idle-ns:
+    description:
+      Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
+      period in which memories are placed into power-down mode if bus is idle
+      for PD_IDLE nanoseconds.
+
+  rockchip,sr-idle-ns:
+    description:
+      Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
+      period in which memories are placed into self-refresh mode if bus is idle
+      for SR_IDLE nanoseconds.
+    default: 0
+
+  rockchip,sr-mc-gate-idle-ns:
+    description:
+      Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
+
+  rockchip,srpd-lite-idle-ns:
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only.
+
+  rockchip,standby-idle-ns:
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle nanoseconds.
+
+  rockchip,pd-idle-dis-freq-hz:
+    description:
+      Defines the power-down idle disable frequency in Hz. When the DDR
+      frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh idle disable frequency in Hz. When the DDR
+      frequency is greater than sr-idle-dis-freq, self-refresh idle is
+      disabled. See also rockchip,sr-idle-ns.
+
+  rockchip,sr-mc-gate-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh and memory-controller clock gating disable
+      frequency in Hz. When the DDR frequency is greater than
+      sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
+      rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd-lite-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh power down idle disable frequency in Hz. When
+      the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
+      not be placed into self-refresh power down mode when idle. See also
+      rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby-idle-dis-freq-hz:
+    description:
+      Defines the standby idle disable frequency in Hz. When the DDR frequency
+      is greater than standby-idle-dis-freq, standby idle is disabled. See also
+      rockchip,standby-idle-ns.
+
+required:
+  - compatible
+  - devfreq-events
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - center-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller {
+      compatible = "rockchip,rk3399-dmc";
+      devfreq-events = <&dfi>;
+      rockchip,pmu = <&pmu>;
+      interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_DDRC>;
+      clock-names = "dmc_clk";
+      operating-points-v2 = <&dmc_opp_table>;
+      center-supply = <&ppvar_centerlogic>;
+      rockchip,pd-idle-ns = <160>;
+      rockchip,sr-idle-ns = <10240>;
+      rockchip,sr-mc-gate-idle-ns = <40960>;
+      rockchip,srpd-lite-idle-ns = <61440>;
+      rockchip,standby-idle-ns = <81920>;
+      rockchip,ddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr4_odt_dis_freq = <333000000>;
+      rockchip,pd-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+      rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+      rockchip,standby-idle-dis-freq-hz = <928000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index fe8639dcffab..098348b2b815 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -9,7 +9,7 @@ title: |
   Controller device
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Lukasz Luba <lukasz.luba@arm.com>
 
 description: |
@@ -45,14 +45,15 @@ properties:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     minItems: 1
     maxItems: 16
+    items:
+      maxItems: 1
     description: phandles of the PPMU events used by the controller.
 
   device-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle'
     description: |
       phandle of the connected DRAM memory device. For more information please
-      refer to documentation file:
-      Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+      refer to jedec,lpddr3.yaml.
 
   operating-points-v2: true
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
new file mode 100644
index 000000000000..e68c4306025a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
+  working with the memory devices supporting up to (LP)DDR4 protocol. It can
+  be equipped with SEC/DEC ECC feature if DRAM data bus width is either
+  16-bits or 32-bits or 64-bits wide.
+
+  For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+  controller. It has an optional SEC/DEC ECC support in 64- and 32-bits
+  bus width configurations.
+
+properties:
+  compatible:
+    oneOf:
+      - deprecated: true
+        description: Synopsys DW uMCTL2 DDR controller v3.80a
+        const: snps,ddrc-3.80a
+      - description: Synopsys DW uMCTL2 DDR controller
+        const: snps,dw-umctl2-ddrc
+      - description: Xilinx ZynqMP DDR controller v2.40a
+        const: xlnx,zynqmp-ddrc-2.40a
+
+  interrupts:
+    description:
+      DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+      ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+      Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+      signals merged before they reach the IRQ controller or have some of them
+      absent in case if the corresponding feature is unavailable/disabled.
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    oneOf:
+      - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+        items:
+          - const: ecc
+      - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+        items:
+          enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      A standard set of the clock sources contains CSRs bus clock, AXI-ports
+      reference clock, DDRC core clock, Scrubber standalone clock
+      (synchronous to the DDRC clock).
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ pclk, aclk, core, sbr ]
+
+  resets:
+    description:
+      Each clock domain can have separate reset signal.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ prst, arst, core, sbr ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@fd070000 {
+      compatible = "xlnx,zynqmp-ddrc-2.40a";
+      reg = <0xfd070000 0x30000>;
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    memory-controller@3d400000 {
+      compatible = "snps,dw-umctl2-ddrc";
+      reg = <0x3d400000 0x400000>;
+
+      interrupts = <147 IRQ_TYPE_LEVEL_HIGH>, <148 IRQ_TYPE_LEVEL_HIGH>,
+                   <149 IRQ_TYPE_LEVEL_HIGH>, <150 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+      clocks = <&pclk>, <&aclk>, <&core_clk>, <&sbr_clk>;
+      clock-names = "pclk", "aclk", "core", "sbr";
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml b/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml
deleted file mode 100644
index fb7ae38a9c86..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml
+++ /dev/null
@@ -1,74 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/synopsys,ddrc-ecc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Synopsys IntelliDDR Multi Protocol memory controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-  - Manish Narani <manish.narani@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
-
-description: |
-  The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and
-  32-bit bus width configurations.
-
-  The Zynq DDR ECC controller has an optional ECC support in half-bus width
-  (16-bit) configuration.
-
-  These both ECC controllers correct single bit ECC errors and detect double bit
-  ECC errors.
-
-properties:
-  compatible:
-    enum:
-      - xlnx,zynq-ddrc-a05
-      - xlnx,zynqmp-ddrc-2.40a
-      - snps,ddrc-3.80a
-
-  interrupts:
-    maxItems: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: xlnx,zynqmp-ddrc-2.40a
-    then:
-      required:
-        - interrupts
-    else:
-      properties:
-        interrupts: false
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@f8006000 {
-        compatible = "xlnx,zynq-ddrc-a05";
-        reg = <0xf8006000 0x1000>;
-    };
-
-  - |
-    axi {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        memory-controller@fd070000 {
-            compatible = "xlnx,zynqmp-ddrc-2.40a";
-            reg = <0x0 0xfd070000 0x0 0x30000>;
-            interrupt-parent = <&gic>;
-            interrupts = <0 112 4>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
index 9ed51185ff99..382ddab60fbd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
@@ -8,7 +8,7 @@ title: Texas Instruments da8xx DDR2/mDDR memory controller
 
 maintainers:
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Documentation:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
index 64dc9d398d9a..e188a4bf755c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -129,11 +129,8 @@ patternProperties:
       The child device node represents the device connected to the GPMC
       bus. The device can be a NAND chip, SRAM device, NOR device
       or an ASIC.
+    $ref: "ti,gpmc-child.yaml"
 
-    allOf:
-      - $ref: "ti,gpmc-child.yaml"
-
-    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
new file mode 100644
index 000000000000..8f72e2f8588a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynq-ddrc-a05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq A05 DDR Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description:
+  The Zynq DDR ECC controller has an optional ECC support in half-bus width
+  (16-bit) configuration. It is cappable of correcting single bit ECC errors
+  and detecting double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,zynq-ddrc-a05
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f8006000 {
+      compatible = "xlnx,zynq-ddrc-a05";
+      reg = <0xf8006000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
deleted file mode 100644
index 937b3e5505e0..000000000000
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ /dev/null
@@ -1,282 +0,0 @@
-* AB8500 Multi-Functional Device (MFD)
-
-Required parent device properties:
-- compatible             : contains "stericsson,ab8500" or "stericsson,ab8505";
-- interrupts             : contains the IRQ line for the AB8500
-- interrupt-controller   : describes the AB8500 as an Interrupt Controller (has its own domain)
-- #interrupt-cells       : should be 2, for 2-cell format
-                            - The first cell is the AB8500 local IRQ number
-                            - The second cell is used to specify optional parameters
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered
-                                  2 = high-to-low edge triggered
-                                  4 = active high level-sensitive
-                                  8 = active low level-sensitive
-
-The AB8500 consists of a large and varied group of sub-devices:
-
-Device                     IRQ Names              Supply Names   Description
-------                     ---------              ------------   -----------
-ab8500-bm                :                      :              : Battery Manager
-ab8500-btemp             :                      :              : Battery Temperature
-ab8500-charger           :                      :              : Battery Charger
-ab8500-codec             :                      :              : Audio Codec
-ab8500-fg                : 			: vddadc       : Fuel Gauge
-			 : NCONV_ACCU           :	       : Accumulate N Sample Conversion
-			 : BATT_OVV		:	       : Battery Over Voltage
-			 : LOW_BAT_F		:	       : LOW threshold battery voltage
-			 : CC_INT_CALIB		:	       : Coulomb Counter Internal Calibration
-			 : CCEOC		:	       : Coulomb Counter End of Conversion
-ab8500-btemp		 :			: vtvout       : Battery Temperature
-			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
-			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
-			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
-ab8500-charger		 :			: vddadc       : Charger interface
-			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
-			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
-			 : MAIN_EXT_CH_NOT_OK	:	       : main charger not OK
-			 : MAIN_CH_TH_PROT_R	:	       : Die temp is above main charger
-			 : MAIN_CH_TH_PROT_F	:	       : Die temp is below main charger
-			 : VBUS_DET_F		:	       : VBUS falling detected
-			 : VBUS_DET_R		:	       : VBUS rising detected
-			 : USB_LINK_STATUS	:	       : USB link status has changed
-			 : USB_CH_TH_PROT_R	:	       : Die temp is above usb charger
-			 : USB_CH_TH_PROT_F	:	       : Die temp is below usb charger
-			 : USB_CHARGER_NOT_OKR	:	       : allowed USB charger not ok detection
-			 : VBUS_OVV		:	       : Overvoltage on Vbus ball detected (USB charge is stopped)
-			 : CH_WD_EXP		:	       : Charger watchdog detected
-ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
-                           SW_CONV_END          :              :
-ab8500-gpio              :                      :              : GPIO Controller (AB8500)
-ab8505-gpio              :                      :              : GPIO Controller (AB8505)
-ab8500-ponkey            : ONKEY_DBF            :              : Power-on Key
-                           ONKEY_DBR            :              :
-ab8500-pwm               :                      :              : Pulse Width Modulator
-ab8500-regulator         :                      :              : Regulators (AB8500)
-ab8505-regulator         :                      :              : Regulators (AB8505)
-ab8500-rtc               : 60S                  :              : Real Time Clock
-                         : ALARM                :              :
-ab8500-sysctrl           :                      :              : System Control
-ab8500-usb               : ID_WAKEUP_R          : vddulpivio18 : Universal Serial Bus
-                         : ID_WAKEUP_F          : v-ape        :
-                         : VBUS_DET_F           : musb_1v8     :
-                         : VBUS_DET_R           :              :
-                         : USB_LINK_STATUS      :              :
-                         : USB_ADP_PROBE_PLUG   :              :
-                         : USB_ADP_PROBE_UNPLUG :              :
-
-Required child device properties:
-- compatible             : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
-                                               pwm|regulator|rtc|sysctrl|usb]";
-
-  A few child devices require ADC channels from the GPADC node. Those follow the
-  standard bindings from
-  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
-  and Documentation/devicetree/bindings/iio/adc/adc.yaml
-
-  abx500-temp		 : io-channels "aux1" and "aux2" for measuring external
-			   temperatures.
-  ab8500-fg		 : io-channel "main_bat_v" for measuring main battery voltage,
-  ab8500-btemp		 : io-channels "btemp_ball" and "bat_ctrl" for measuring the
-			   battery voltage.
-  ab8500-charger	 : io-channels "main_charger_v", "main_charger_c", "vbus_v",
-			   "usb_charger_c" for measuring voltage and current of the
-			   different charging supplies.
-
-Optional child device properties:
-- interrupts             : contains the device IRQ(s) using the 2-cell format (see above)
-- interrupt-names        : contains names of IRQ resource in the order in which they were
-                           supplied in the interrupts property
-- <supply_name>-supply   : contains a phandle to the regulator supply node in Device Tree
-
-Non-standard child device properties:
- - Audio CODEC:
-   - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
-   - stericsson,amic1a-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic1b-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-
-ab8500 {
-         compatible = "stericsson,ab8500";
-         interrupts = <0 40 0x4>;
-         interrupt-controller;
-         #interrupt-cells = <2>;
-
-         ab8500-rtc {
-                 compatible = "stericsson,ab8500-rtc";
-                 interrupts = <17 0x4
-                               18 0x4>;
-                 interrupt-names = "60S", "ALARM";
-         };
-
-        ab8500-gpadc {
-                compatible = "stericsson,ab8500-gpadc";
-                interrupts = <32 0x4
-                              39 0x4>;
-                interrupt-names = "HW_CONV_END", "SW_CONV_END";
-                vddadc-supply = <&ab8500_ldo_tvout_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-
-		/* GPADC channels */
-		bat_ctrl: channel@1 {
-			reg = <0x01>;
-		};
-		btemp_ball: channel@2 {
-			reg = <0x02>;
-		};
-		main_charger_v: channel@3 {
-			reg = <0x03>;
-		};
-		acc_detect1: channel@4 {
-			reg = <0x04>;
-		};
-		acc_detect2: channel@5 {
-			reg = <0x05>;
-		};
-		adc_aux1: channel@6 {
-			reg = <0x06>;
-		};
-		adc_aux2: channel@7 {
-			reg = <0x07>;
-		};
-		main_batt_v: channel@8 {
-			reg = <0x08>;
-		};
-		vbus_v: channel@9 {
-			reg = <0x09>;
-		};
-		main_charger_c: channel@a {
-			reg = <0x0a>;
-		};
-		usb_charger_c: channel@b {
-			reg = <0x0b>;
-		};
-		bk_bat_v: channel@c {
-			reg = <0x0c>;
-		};
-		die_temp: channel@d {
-			reg = <0x0d>;
-		};
-		usb_id: channel@e {
-			reg = <0x0e>;
-		};
-		xtal_temp: channel@12 {
-			reg = <0x12>;
-		};
-		vbat_true_meas: channel@13 {
-			reg = <0x13>;
-		};
-		bat_ctrl_and_ibat: channel@1c {
-			reg = <0x1c>;
-		};
-		vbat_meas_and_ibat: channel@1d {
-			reg = <0x1d>;
-		};
-		vbat_true_meas_and_ibat: channel@1e {
-			reg = <0x1e>;
-		};
-		bat_temp_and_ibat: channel@1f {
-			reg = <0x1f>;
-		};
-        };
-
-	ab8500_temp {
-		compatible = "stericsson,abx500-temp";
-		io-channels = <&gpadc 0x06>,
-			      <&gpadc 0x07>;
-		io-channel-name = "aux1", "aux2";
-	};
-
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-		thermistor-on-batctrl;
-	};
-
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x08>;
-		io-channel-name = "main_bat_v";
-	};
-
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x02>,
-			      <&gpadc 0x01>;
-		io-channel-name = "btemp_ball",
-				"bat_ctrl";
-	};
-
-	ab8500_charger {
-		compatible	= "stericsson,ab8500-charger";
-		battery		= <&ab8500_battery>;
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-		io-channels = <&gpadc 0x03>,
-			      <&gpadc 0x0a>,
-			      <&gpadc 0x09>,
-			      <&gpadc 0x0b>;
-		io-channel-name = "main_charger_v",
-				"main_charger_c",
-				"vbus_v",
-				"usb_charger_c";
-	};
-
-        ab8500-usb {
-                compatible = "stericsson,ab8500-usb";
-                interrupts = < 90 0x4
-                               96 0x4
-                               14 0x4
-                               15 0x4
-                               79 0x4
-                               74 0x4
-                               75 0x4>;
-                interrupt-names = "ID_WAKEUP_R",
-                                  "ID_WAKEUP_F",
-                                  "VBUS_DET_F",
-                                  "VBUS_DET_R",
-                                  "USB_LINK_STATUS",
-                                  "USB_ADP_PROBE_PLUG",
-                                  "USB_ADP_PROBE_UNPLUG";
-                vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-                v-ape-supply = <&db8500_vape_reg>;
-                musb_1v8-supply = <&db8500_vsmps2_reg>;
-        };
-
-        ab8500-ponkey {
-                compatible = "stericsson,ab8500-ponkey";
-                interrupts = <6 0x4
-                              7 0x4>;
-                interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-        };
-
-        ab8500-sysctrl {
-                compatible = "stericsson,ab8500-sysctrl";
-        };
-
-        ab8500-pwm {
-                compatible = "stericsson,ab8500-pwm";
-        };
-
-	codec: ab8500-codec {
-		compatible = "stericsson,ab8500-codec";
-
-		stericsson,earpeice-cmv = <950>; /* Units in mV. */
-	};
-
-        ab8500-regulators {
-                compatible = "stericsson,ab8500-regulator";
-
-                ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-                        /*
-                         * See: Documentation/devicetree/bindings/regulator/regulator.txt
-                         * for more information on regulators
-                         */
-                };
-        };
-};
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
index f591332fc462..93f5065a6280 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
+title: Allwinner A10 Resistive Touchscreen Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index d131759ccaf3..cf94176fe1eb 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 PRCM Device Tree Bindings
+title: Allwinner A31 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*_(clk|rst)$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -38,6 +39,45 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun4i-a10-mod0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 2
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun6i-a31-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
index aa5e683b236c..16c80a7eec49 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 PRCM Device Tree Bindings
+title: Allwinner A23 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*(clk|rst|codec).*$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -40,6 +41,15 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun8i-a23-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
new file mode 100644
index 000000000000..1689b986f441
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed System Control Unit
+
+description:
+  The Aspeed System Control Unit manages the global behaviour of the SoC,
+  configuring elements such as clocks, pinmux, and reset.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-scu
+          - aspeed,ast2500-scu
+          - aspeed,ast2600-scu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+patternProperties:
+  '^p2a-control@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+    type: object
+
+  '^pinctrl(@[0-9a-f]+)?$':
+    oneOf:
+      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+
+  '^interrupt-controller@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+    type: object
+
+  '^silicon-id@[0-9a-f]+$':
+    description: Unique hardware silicon identifiers within the SoC
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-silicon-id
+              - aspeed,ast2500-silicon-id
+              - aspeed,ast2600-silicon-id
+          - const: aspeed,silicon-id
+
+      reg:
+        description:
+          The reg should be the unique silicon id register, and not backwards
+          compatible one in eg. the 2600.
+        minItems: 1
+        items:
+          - description: silicon id information registers
+          - description: unique chip id registers
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        silicon-id@7c {
+            compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+            reg = <0x7c 0x4>, <0x150 0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
deleted file mode 100644
index 857ee33f7329..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-The Aspeed System Control Unit manages the global behaviour of the SoC,
-configuring elements such as clocks, pinmux, and reset.
-
-Required properties:
-- compatible:	One of:
-		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-
-- reg:		contains the offset and length of the SCU memory region
-- #clock-cells: should be set to <1> - the system controller is also a
-	clock provider
-- #reset-cells: should be set to <1> - the system controller is also a
-	reset line provider
-
-Example:
-
-syscon: syscon@1e6e2000 {
-	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-	reg = <0x1e6e2000 0x1a8>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Silicon ID
------------------
-
-Families have unique hardware silicon identifiers within the SoC.
-
-Required properties:
-
- - compatible:		"aspeed,silicon-id" or:
-			"aspeed,ast2400-silicon-id" or
-			"aspeed,ast2500-silicon-id" or
-			"aspeed,ast2600-silicon-id"
-
- - reg:			offset and length of the silicon id information
-			optionally, a second offset and length describes the unique chip id
-
-			The reg should be the unique silicon id register, and
-			not backwards compatible one in eg. the 2600.
-
-Example:
-
-
-silicon-id@7c {
-        compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
-        reg = <0x7c 0x4 0x150 0x8>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 692300117c64..9d837535637b 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -54,7 +54,7 @@ flexcom@f8034000 {
 		clock-names = "spi_clk";
 		atmel,fifo-size = <32>;
 
-		mtd_dataflash@0 {
+		flash@0 {
 			compatible = "atmel,at25f512b";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
deleted file mode 100644
index a09133066aff..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-
-Required properties for USART:
-- compatible: Should be one of the following:
-	- "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-usart"
-	- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clock-names: tuple listing input clock names.
-	Required elements: "usart"
-- clocks: phandles to input clocks.
-
-Required properties for USART in SPI mode:
-- #size-cells      : Must be <0>
-- #address-cells   : Must be <1>
-- cs-gpios: chipselects (internal cs not supported)
-- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
-
-Optional properties in serial and SPI mode:
-- dma bindings for dma transfer:
-	- dmas: DMA specifier, consisting of a phandle to DMA controller node,
-		memory peripheral interface and USART DMA channel ID, FIFO configuration.
-		The order of DMA channels is fixed. The first DMA channel must be TX
-		associated channel and the second one must be RX associated channel.
-		Refer to dma.txt and atmel-dma.txt for details.
-	- dma-names: "tx" for TX channel.
-		     "rx" for RX channel.
-		     The order of dma-names is also fixed. The first name must be "tx"
-		     and the second one must be "rx" as in the examples below.
-
-Optional properties in serial mode:
-- atmel,use-dma-rx: use of PDC or DMA for receiving data
-- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
-  It will use specified PIO instead of the peripheral function pin for the USART feature.
-  If unsure, don't specify this property.
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable USARTs.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-<chip> compatible description:
-- at91rm9200:  legacy USART support
-- at91sam9260: generic USART implementation for SAM9 SoCs
-
-Example:
-- use PDC:
-	usart0: serial@fff8c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xfff8c000 0x4000>;
-		interrupts = <7>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
-		cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
-	};
-
-- use DMA:
-	usart0: serial@f001c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 4 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		dmas = <&dma0 2 0x3>,
-		       <&dma0 2 0x204>;
-		dma-names = "tx", "rx";
-		atmel,fifo-size = <32>;
-	};
-
-- SPI mode:
-	#include <dt-bindings/mfd/at91-usart.h>
-
-	spi0: spi@f001c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
-		atmel,usart-mode = <AT91_USART_MODE_SPI>;
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
-		       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-		dma-names = "tx", "rx";
-		cs-gpios = <&pioB 3 0>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index afc569bc15cf..148f1da47603 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6318 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index c7771c86d7c1..7e582243ea76 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM63268 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index 33963c11ae62..2230848e11c3 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6328 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index 3e44bea78b03..c06693b6f7aa 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6358 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index 48d14a5fe0d5..c560bede0e37 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6362 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index 307270b0cfed..c534f5f2404e 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6368 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
index be4a2df71c25..b85819fbb07c 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -39,7 +39,7 @@ patternProperties:
   '^phy@[a-f0-9]+$':
     $ref: ../phy/bcm-ns-usb2-phy.yaml
 
-  '^pin-controller@[a-f0-9]+$':
+  '^pinctrl@[a-f0-9]+$':
     $ref: ../pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
@@ -94,7 +94,7 @@ examples:
             reg = <0x180 0x4>;
         };
 
-        pin-controller@1c0 {
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index c24ad45cabb5..e2046f07a40e 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 System Controller Device Tree Bindings
+title: Canaan Kendryte K210 System Controller
 
 maintainers:
   - Damien Le Moal <damien.lemoal@wdc.com>
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
index c00ad3e21c21..ebbedabb2bd4 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -126,7 +126,7 @@ properties:
       clock-frequency:
         const: 12288000
 
-  lochnagar-pinctrl:
+  pinctrl:
     type: object
     $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
 
@@ -144,6 +144,7 @@ properties:
       CODECs digital core if not being provided by an internal regulator.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -161,6 +162,7 @@ properties:
       CODECs MICVDD.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -177,6 +179,7 @@ properties:
       Initialisation data for the MIC1VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -202,6 +205,7 @@ properties:
       Initialisation data for the MIC2VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -228,6 +232,7 @@ properties:
       the CODECs analog and 1.8V digital supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -255,13 +260,13 @@ required:
   - reg
   - reset-gpios
   - lochnagar-clk
-  - lochnagar-pinctrl
+  - pinctrl
 
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/lochnagar.h>
+    #include <dt-bindings/clock/lochnagar.h>
     #include <dt-bindings/pinctrl/lochnagar.h>
     i2c@e0004000 {
         #address-cells = <1>;
@@ -293,7 +298,7 @@ examples:
                 clock-frequency = <32768>;
             };
 
-            lochnagar-pinctrl {
+            pinctrl {
                 compatible = "cirrus,lochnagar-pinctrl";
 
                 gpio-controller;
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
index 499c62c04daa..68c75a517c92 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -221,7 +221,6 @@ required:
   - '#gpio-cells'
   - interrupt-controller
   - '#interrupt-cells'
-  - interrupt-parent
   - interrupts
   - AVDD-supply
   - DBVDD1-supply
@@ -246,8 +245,7 @@ examples:
 
             interrupt-controller;
             #interrupt-cells = <2>;
-            interrupts = <&host_irq1>;
-            interrupt-parent = <&gic>;
+            interrupts = <4 1 0>;
 
             gpio-controller;
             #gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 91b79a21d403..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9063 consists of a large and varied group of sub-devices (I2C Only):
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9063-regulator        :               : LDOs & BUCKs
-da9063-onkey            :               : On Key
-da9063-rtc              :               : Real-Time Clock (DA9063 only)
-da9063-watchdog         :               : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9063(L) regulators are bound using their names listed below:
-
-    bcore1    : BUCK CORE1
-    bcore2    : BUCK CORE2
-    bpro      : BUCK PRO
-    bmem      : BUCK MEM
-    bio       : BUCK IO
-    bperi     : BUCK PERI
-    ldo1      : LDO_1	(DA9063 only)
-    ldo2      : LDO_2	(DA9063 only)
-    ldo3      : LDO_3
-    ldo4      : LDO_4	(DA9063 only)
-    ldo5      : LDO_5	(DA9063 only)
-    ldo6      : LDO_6	(DA9063 only)
-    ldo7      : LDO_7
-    ldo8      : LDO_8
-    ldo9      : LDO_9
-    ldo10     : LDO_10	(DA9063 only)
-    ldo11     : LDO_11
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
-  the DA9063 only. The RTC is not present in DA9063L. There are currently
-  no entries in this binding, however compatible = "dlg,da9063-rtc" should
-  be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
-  functionality of the device. The node should contain the compatible property
-  with the value "dlg,da9063-onkey".
-
-  Optional onkey properties:
-
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
-  with the DA9063 and DA9063L. There are currently no entries in this
-  binding, however compatible = "dlg,da9063-watchdog" should be added
-  if a node is created.
-
-
-Example:
-
-	pmic0: da9063@58 {
-		compatible = "dlg,da9063"
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		wdt {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-
-		regulators {
-			DA9063_BCORE1: bcore1 {
-				regulator-name = "BCORE1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-boot-on;
-			};
-			DA9063_LDO11: ldo11 {
-				regulator-name = "LDO_11";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
new file mode 100644
index 000000000000..f6967c1f6235
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander and reset controller
+  for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: ../reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpo";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
new file mode 100644
index 000000000000..e8e74e91070c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+  For device-tree bindings of other sub-modules refer to the binding documents
+  under the respective sub-system directories.
+
+properties:
+  compatible:
+    enum:
+      - dlg,da9063
+      - dlg,da9063l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  dlg,use-sw-pm:
+    type: boolean
+    description:
+      Disable the watchdog during suspend.
+      Only use this option if you can't use the watchdog automatic suspend
+      function during a suspend (see register CONTROL_B).
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-watchdog
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-rtc
+
+  onkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-onkey
+
+      dlg,disable-key-power:
+        type: boolean
+        description: |
+          Disable power-down using a long key-press.
+          If this entry does not exist then by default the key-press triggered
+          power down is enabled and the OnKey will support both KEY_POWER and
+          KEY_SLEEP.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9063";
+        reg = <0x58>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+
+        rtc {
+          compatible = "dlg,da9063-rtc";
+        };
+
+        watchdog {
+          compatible = "dlg,da9063-watchdog";
+        };
+
+        onkey {
+          compatible = "dlg,da9063-onkey";
+          dlg,disable-key-power;
+        };
+
+        regulators {
+          bcore1 {
+            regulator-name = "BCORE1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1570000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <2000000>;
+            regulator-boot-on;
+          };
+          ldo11 {
+            regulator-name = "LDO_11";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <3600000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
new file mode 100644
index 000000000000..f09577105b50
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  As a system controller, the Freescale i.MX8qm/qxp Control and Status
+  Registers(CSR) module represents a set of miscellaneous registers of a
+  specific subsystem.  It may provide control and/or status report interfaces
+  to a mix of standalone hardware devices within that subsystem.  One typical
+  use-case is for some other nodes to acquire a reference to the syscon node
+  by phandle, and the other typical use-case is that the operating system
+  should consider all subnodes of the CSR module as separate child devices.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-mipi-lvds-csr
+          - fsl,imx8qm-lvds-csr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+patternProperties:
+  "^(ldb|phy|pxl2dpi)$":
+    type: object
+    description: The possible child devices of the CSR module.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-lvds-csr
+    then:
+      required:
+        - pxl2dpi
+        - ldb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-lvds-csr
+    then:
+      required:
+        - phy
+        - ldb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mipi_lvds_0_csr: syscon@56221000 {
+        compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+        reg = <0x56221000 0x1000>;
+        clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "ipg";
+
+        mipi_lvds_0_pxl2dpi: pxl2dpi {
+            compatible = "fsl,imx8qxp-pxl2dpi";
+            fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+
+                port@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+            };
+        };
+
+        mipi_lvds_0_ldb: ldb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "fsl,imx8qxp-ldb";
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                     <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+            clock-names = "pixel", "bypass";
+            power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+            channel@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+
+            channel@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+        };
+    };
+
+    mipi_lvds_0_phy: phy@56228300 {
+        compatible = "fsl,imx8qxp-mipi-dphy";
+        reg = <0x56228300 0x100>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        clock-names = "phy_ref";
+        #phy-cells = <0>;
+        fsl,syscon = <&mipi_lvds_0_csr>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 5a1e8d21f7a0..acb9c54942d9 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -19,7 +19,6 @@ description: |
 
 maintainers:
   - Tim Harvey <tharvey@gateworks.com>
-  - Robert Jones <rjones@gateworks.com>
 
 properties:
   $nodename:
@@ -47,6 +46,7 @@ properties:
 
   adc:
     type: object
+    additionalProperties: false
     description: Optional hardware monitoring module
 
     properties:
@@ -60,8 +60,9 @@ properties:
         const: 0
 
     patternProperties:
-      "^channel@[0-9]+$":
+      "^channel@[0-9a-f]+$":
         type: object
+        additionalProperties: false
         description: |
           Properties for a single ADC which can report cooked values
           (i.e. temperature sensor based on thermister), raw values
@@ -114,6 +115,7 @@ properties:
 patternProperties:
   "^fan-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: Optional fan controller
 
     properties:
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 0faa4da6c7c8..04962bb29576 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS Embedded Controller
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
   - Guenter Roeck <groeck@chromium.org>
 
 description:
@@ -32,25 +31,21 @@ properties:
 
   controller-data:
     description:
-      SPI controller data, see bindings/spi/spi-samsung.txt
+      SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml
     type: object
 
   google,cros-ec-spi-pre-delay:
     description:
       This property specifies the delay in usecs between the
       assertion of the CS and the first clock pulse.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,cros-ec-spi-msg-delay:
     description:
       This property specifies the delay in usecs between messages.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,has-vbc-nvram:
     description:
@@ -62,7 +57,7 @@ properties:
   mediatek,rpmsg-name:
     description:
       Must be defined if the cros-ec is a rpmsg device for a Mediatek
-      ARM Cortex M4 Co-processor. Contains the name pf the rpmsg
+      ARM Cortex M4 Co-processor. Contains the name of the rpmsg
       device. Used to match the subnode to the rpmsg device announced by
       the SCP.
     $ref: "/schemas/types.yaml#/definitions/string"
@@ -90,6 +85,13 @@ properties:
 
   ec-pwm:
     $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    deprecated: true
+
+  pwm:
+    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+
+  kbd-led-backlight:
+    $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#"
 
   keyboard-controller:
     $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
@@ -149,18 +151,21 @@ patternProperties:
 required:
   - compatible
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - google,cros-ec-i2c
-          - google,cros-ec-rpmsg
-then:
-  properties:
-    google,cros-ec-spi-pre-delay: false
-    google,cros-ec-spi-msg-delay: false
-    spi-max-frequency: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,cros-ec-i2c
+              - google,cros-ec-rpmsg
+    then:
+      properties:
+        google,cros-ec-spi-pre-delay: false
+        google,cros-ec-spi-msg-delay: false
+        spi-max-frequency: false
+    else:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
 
 additionalProperties: false
 
@@ -201,7 +206,7 @@ examples:
             spi-max-frequency = <5000000>;
 
             proximity {
-                    compatible = "google,cros-ec-mkbp-proximity";
+                compatible = "google,cros-ec-mkbp-proximity";
             };
 
             cbas {
diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
index a3b976f101e8..084960fd5a1f 100644
--- a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
+++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Khadas on-board Microcontroller Device Tree Bindings
+title: Khadas on-board Microcontroller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   Khadas embeds a microcontroller on their VIM and Edge boards adding some
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
deleted file mode 100644
index be11943a0560..000000000000
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
deleted file mode 100644
index 1032df14498b..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-Maxim MAX77693 multi-function device
-
-MAX77693 is a Multifunction device with the following submodules:
-- PMIC,
-- CHARGER,
-- LED,
-- MUIC,
-- HAPTIC
-
-It is interfaced to host controller using i2c.
-This document describes the bindings for the mfd device.
-
-Required properties:
-- compatible : Must be "maxim,max77693".
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnode
-  named "regulators" using the following format.
-
-	regulators {
-		regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
-		standard regulator constraints[*].
-	};
-
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
-  users with tactile feedback. PWM period and duty-cycle are varied in
-  order to provide the appropriate level of feedback.
-
- Required properties:
-	- compatible : Must be "maxim,max77693-haptic"
-	- haptic-supply : power supply for the haptic motor
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
-	 PWM properties should be named "pwms". And number of cell is different
-	 for each pwm device.
-	 To get more information, please refer to documentation.
-	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
-
-- charger : Node configuring the charger driver.
-  If present, required properties:
-  - compatible : Must be "maxim,max77693-charger".
-
-  Optional properties (if not set, defaults will be used):
-  - maxim,constant-microvolt : Battery constant voltage in uV. The charger
-    will operate in fast charge constant current mode till battery voltage
-    reaches this level. Then the charger will switch to fast charge constant
-    voltage mode. Also vsys (system voltage) will be set to this value when
-    DC power is supplied but charger is not enabled.
-    Valid values: 3650000 - 4400000, step by 25000 (rounded down)
-    Default: 4200000
-
-  - maxim,min-system-microvolt : Minimal system voltage in uV.
-    Valid values: 3000000 - 3700000, step by 100000 (rounded down)
-    Default: 3600000
-
-  - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
-    high temperature charging mode. If die temperature exceeds this value
-    the charging current will be reduced by 105 mA/Celsius.
-    Valid values: 70, 85, 100, 115
-    Default: 100
-
-  - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
-    in uA (current from battery to system).
-    Valid values: 2000000 - 3500000, step by 250000 (rounded down)
-    Default: 3500000
-
-  - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
-    triggering input voltage regulation loop. If input voltage decreases
-    below this value, the input current will be reduced to reach the
-    threshold voltage.
-    Valid values: 4300000, 4700000, 4800000, 4900000
-    Default: 4300000
-
-- led : the LED submodule device node
-
-There are two LED outputs available - FLED1 and FLED2. Each of them can
-control a separate LED or they can be connected together to double
-the maximum current for a single connected LED. One LED is represented
-by one child node.
-
-Required properties:
-- compatible : Must be "maxim,max77693-led".
-
-Optional properties:
-- maxim,boost-mode :
-	In boost mode the device can produce up to 1.2A of total current
-	on both outputs. The maximum current on each output is reduced
-	to 625mA then. If not enabled explicitly, boost setting defaults to
-	LEDS_BOOST_FIXED in case both current sources are used.
-	Possible values:
-		LEDS_BOOST_OFF (0) - no boost,
-		LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
-		LEDS_BOOST_FIXED (2) - fixed mode.
-- maxim,boost-mvout : Output voltage of the boost module in millivolts.
-	Valid values: 3300 - 5500, step by 25 (rounded down)
-	Default: 3300
-- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
-	if chip estimates that system voltage could drop below this level due
-	to flash power consumption.
-	Valid values: 2400 - 3400, step by 33 (rounded down)
-	Default: 2400
-
-Required properties for the LED child node:
-- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
-		device current output identifiers: 0 - FLED1, 1 - FLED2
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a LED connected to one FLED output:
-		15625 - 250000, step by 15625 (rounded down)
-	Valid values for a LED connected to both FLED outputs:
-		15625 - 500000, step by 15625 (rounded down)
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a single LED connected to one FLED output
-	(boost mode must be turned off):
-		15625 - 1000000, step by 15625 (rounded down)
-	Valid values for a single LED connected to both FLED outputs:
-		15625 - 1250000, step by 15625 (rounded down)
-	Valid values for two LEDs case:
-		15625 - 625000, step by 15625 (rounded down)
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values: 62500 - 1000000, step by 62500 (rounded down)
-
-Optional properties for the LED child node:
-- label : see Documentation/devicetree/bindings/leds/common.txt
-
-Optional nodes:
-- max77693-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max77693-muic"
-
-Example:
-#include <dt-bindings/leds/common.h>
-
-	max77693@66 {
-		compatible = "maxim,max77693";
-		reg = <0x66>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			esafeout@1 {
-				regulator-compatible = "ESAFEOUT1";
-				regulator-name = "ESAFEOUT1";
-				regulator-boot-on;
-			};
-			esafeout@2 {
-				regulator-compatible = "ESAFEOUT2";
-				regulator-name = "ESAFEOUT2";
-				};
-			charger@0 {
-				regulator-compatible = "CHARGER";
-				regulator-name = "CHARGER";
-				regulator-min-microamp = <60000>;
-				regulator-max-microamp = <2580000>;
-					regulator-boot-on;
-			};
-		};
-
-		haptic {
-			compatible = "maxim,max77693-haptic";
-			haptic-supply = <&haptic_supply>;
-			pwms = <&pwm 0 40000 0>;
-			pwm-names = "haptic";
-		};
-
-		charger {
-			compatible = "maxim,max77693-charger";
-
-			maxim,constant-microvolt = <4200000>;
-			maxim,min-system-microvolt = <3600000>;
-			maxim,thermal-regulation-celsius = <75>;
-			maxim,battery-overcurrent-microamp = <3000000>;
-			maxim,charge-input-threshold-microvolt = <4300000>;
-		};
-
-		led {
-			compatible = "maxim,max77693-led";
-			maxim,boost-mode = <LEDS_BOOST_FIXED>;
-			maxim,boost-mvout = <5000>;
-			maxim,mvsys-min = <2400>;
-
-			camera_flash: flash-led {
-				label = "max77693-flash";
-				led-sources = <0>, <1>;
-				led-max-microamp = <500000>;
-				flash-max-microamp = <1250000>;
-				flash-max-timeout-us = <1000000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
deleted file mode 100644
index 09decac20d91..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Maxim MAX77802 multi-function device
-
-The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
-efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
-up application processors and peripherals, a 2-channel 32kHz clock outputs,
-a Real-Time-Clock (RTC) and a I2C interface to program the individual
-regulators, clocks outputs and the RTC.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77802.txt and
-../regulator/max77802.txt respectively.
-
-Required properties:
-- compatible		: Must be "maxim,max77802"
-- reg			: Specifies the I2C slave address of PMIC block.
-- interrupts		: I2C device IRQ line connected to the main SoC.
-
-Example:
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&intc>;
-		interrupts = <26 IRQ_TYPE_NONE>;
-		reg = <0x09>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 000000000000..995e96ee7445
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <45000>;
+                    regulator-max-microamp = <475000>;
+                    regulator-boot-on;
+                };
+
+                LDO1 {
+                    regulator-name = "MOT_2.7V";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                    regulator-name = "UNUSED_LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
index 859655a789c3..d027aabe453b 100644
--- a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
@@ -8,7 +8,7 @@ title: Maxim MAX77686 Power Management IC
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for Maxim MAX77686 Power Management
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
new file mode 100644
index 000000000000..1b06a77ec798
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, LED/flash, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77693
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max77693.yaml
+
+  led:
+    $ref: /schemas/leds/maxim,max77693.yaml
+
+  max77693-muic:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+    required:
+      - compatible
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: ../regulator/maxim,max77693.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77693";
+            reg = <0x66>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                ESAFEOUT1 {
+                    regulator-name = "ESAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "ESAFEOUT2";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <60000>;
+                    regulator-max-microamp = <2580000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77693-haptic";
+                haptic-supply = <&ldo26_reg>;
+                pwms = <&pwm 0 38022 0>;
+            };
+
+            charger {
+                compatible = "maxim,max77693-charger";
+
+                maxim,constant-microvolt = <4350000>;
+                maxim,min-system-microvolt = <3600000>;
+                maxim,thermal-regulation-celsius = <100>;
+                maxim,battery-overcurrent-microamp = <3500000>;
+                maxim,charge-input-threshold-microvolt = <4300000>;
+            };
+
+            led {
+                compatible = "maxim,max77693-led";
+                maxim,boost-mode = <LEDS_BOOST_FIXED>;
+                maxim,boost-mvout = <5000>;
+                maxim,mvsys-min = <2400>;
+
+                flash-led {
+                    label = "max77693-flash";
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-sources = <0>, <1>;
+                    led-max-microamp = <500000>;
+                    flash-max-microamp = <1250000>;
+                    flash-max-timeout-us = <1000000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
new file mode 100644
index 000000000000..edac14af101e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  MAX77714 is a Power Management IC with 4 buck regulators, 9
+  low-dropout regulators, 8 GPIOs, RTC and watchdog.
+
+properties:
+  compatible:
+    const: maxim,max77714
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(buck[0-3]|ldo[0-8])$':
+        type: object
+        unevaluatedProperties: false
+        $ref: /schemas/regulator/regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@1c {
+            compatible = "maxim,max77714";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
new file mode 100644
index 000000000000..ad2013900b03
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77802 is a Power Management IC which includes voltage and
+  current regulators (10 high efficiency Buck regulators and 32 Low-DropOut
+  (LDO)), RTC and clock outputs.
+
+  The MAX77802 provides two 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77802.h.
+
+properties:
+  compatible:
+    const: maxim,max77802
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77802.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  inb1-supply:
+    description: Power supply for buck1
+  inb2-supply:
+    description: Power supply for buck2
+  inb3-supply:
+    description: Power supply for buck3
+  inb4-supply:
+    description: Power supply for buck4
+  inb5-supply:
+    description: Power supply for buck5
+  inb6-supply:
+    description: Power supply for buck6
+  inb7-supply:
+    description: Power supply for buck7
+  inb8-supply:
+    description: Power supply for buck8
+  inb9-supply:
+    description: Power supply for buck9
+  inb10-supply:
+    description: Power supply for buck10
+
+  inl1-supply:
+    description: Power supply for LDO8, LDO15
+  inl2-supply:
+    description: Power supply for LDO17, LDO27, LDO30, LDO35
+  inl3-supply:
+    description: Power supply for LDO3, LDO5, LDO7, LDO7
+  inl4-supply:
+    description: Power supply for LDO10, LDO11, LDO13, LDO14
+  inl5-supply:
+    description: Power supply for LDO9, LDO19
+  inl6-supply:
+    description: Power supply for LDO4, LDO21, LDO24, LDO33
+  inl7-supply:
+    description: Power supply for LDO18, LDO20, LDO28, LDO29
+  inl9-supply:
+    description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34
+  inl10-supply:
+    description: Power supply for LDO1, LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/maxim,max77802.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@9 {
+            compatible = "maxim,max77802";
+            interrupt-parent = <&gpx3>;
+            interrupts = <1 IRQ_TYPE_NONE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+                        <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+            wakeup-source;
+            reg = <0x9>;
+            #clock-cells = <1>;
+
+            inb1-supply = <&tps65090_dcdc2>;
+            inb2-supply = <&tps65090_dcdc1>;
+            inb3-supply = <&tps65090_dcdc2>;
+            inb4-supply = <&tps65090_dcdc2>;
+            inb5-supply = <&tps65090_dcdc1>;
+            inb6-supply = <&tps65090_dcdc2>;
+            inb7-supply = <&tps65090_dcdc1>;
+            inb8-supply = <&tps65090_dcdc1>;
+            inb9-supply = <&tps65090_dcdc1>;
+            inb10-supply = <&tps65090_dcdc1>;
+
+            inl1-supply = <&buck5_reg>;
+            inl2-supply = <&buck7_reg>;
+            inl3-supply = <&buck9_reg>;
+            inl4-supply = <&buck9_reg>;
+            inl5-supply = <&buck9_reg>;
+            inl6-supply = <&tps65090_dcdc2>;
+            inl7-supply = <&buck9_reg>;
+            inl9-supply = <&tps65090_dcdc2>;
+            inl10-supply = <&buck7_reg>;
+
+            regulators {
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK10 {
+                    regulator-name = "vdd_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-initial-mode = <MAX77802_OPMODE_NORMAL>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <MAX77802_OPMODE_LP>;
+                    };
+                };
+
+                // ...
+
+                LDO35 {
+                    regulator-name = "ldo_35";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
new file mode 100644
index 000000000000..2e2a2a86b57d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, fuel-gauge, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77843
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  extcon:
+    $ref: /schemas/extcon/maxim,max77843.yaml
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: maxim,max77843-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77843.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77843";
+            interrupt-parent = <&gpa1>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+            reg = <0x66>;
+
+            extcon {
+                compatible = "maxim,max77843-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            /*
+                             * TODO: The DTS this is based on does not have
+                             * port@0 which is a required property. The ports
+                             * look incomplete and need fixing.
+                             * Add a disabled port just to satisfy dtschema.
+                             */
+                            reg = <0>;
+                            status = "disabled";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            endpoint {
+                                remote-endpoint = <&mhl_to_musb_con>;
+                            };
+                        };
+                    };
+                };
+
+                ports {
+                    port {
+                        endpoint {
+                            remote-endpoint = <&usb_to_muic>;
+                        };
+                    };
+                };
+            };
+
+            regulators {
+                compatible = "maxim,max77843-regulator";
+
+                SAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                SAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <100000>;
+                    regulator-max-microamp = <3150000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77843-haptic";
+                haptic-supply = <&ldo38_reg>;
+                pwms = <&pwm 0 33670 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
new file mode 100644
index 000000000000..28eee02441ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
@@ -0,0 +1,256 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  MT6360 is a PMIC device with the following sub modules.
+  It is interfaced to host controller using I2C interface.
+
+  This document describes the binding for PMIC device and its sub module.
+
+properties:
+  compatible:
+    const: mediatek,mt6360
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: IRQB
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The first cell is the IRQ number.
+
+  regulators:
+    $ref: /schemas/regulator/mt6360-regulator.yaml#
+
+  charger:
+    $ref: /schemas/power/supply/mt6360_charger.yaml#
+
+  tcpc:
+    $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml#
+
+  led-controller:
+    $ref: /schemas/leds/leds-mt6360.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@34 {
+            compatible = "mediatek,mt6360";
+            reg = <0x34>;
+            wakeup-source;
+            interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "IRQB";
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            mt6360_charger: charger {
+                compatible = "mediatek,mt6360-chg";
+                richtek,vinovp-microvolt = <14500000>;
+
+                otg_vbus_regulator: usb-otg-vbus-regulator {
+                    regulator-compatible = "usb-otg-vbus";
+                    regulator-name = "usb-otg-vbus";
+                    regulator-min-microvolt = <4425000>;
+                    regulator-max-microvolt = <5825000>;
+                };
+            };
+
+            led-controller {
+                compatible = "mediatek,mt6360-led";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                multi-led@0 {
+                    reg = <0>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_RGB>;
+                    led-max-microamp = <24000>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_RED>;
+                    };
+                    led@1 {
+                        reg = <1>;
+                        color = <LED_COLOR_ID_GREEN>;
+                    };
+                    led@2 {
+                        reg = <2>;
+                        color = <LED_COLOR_ID_BLUE>;
+                    };
+                };
+                led@3 {
+                    reg = <3>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-max-microamp = <150000>;
+                };
+                led@4 {
+                    reg = <4>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <1>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+                led@5 {
+                    reg = <5>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <2>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+            };
+
+            regulators {
+                compatible = "mediatek,mt6360-regulator";
+                LDO_VIN3-supply = <&BUCK2>;
+                buck1 {
+                    regulator-compatible = "BUCK1";
+                    regulator-name = "mt6360,buck1";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                BUCK2: buck2 {
+                    regulator-compatible = "BUCK2";
+                    regulator-name = "mt6360,buck2";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                ldo6 {
+                    regulator-compatible = "LDO6";
+                    regulator-name = "mt6360,ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo7 {
+                    regulator-compatible = "LDO7";
+                    regulator-name = "mt6360,ldo7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo1 {
+                    regulator-compatible = "LDO1";
+                    regulator-name = "mt6360,ldo1";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo2 {
+                    regulator-compatible = "LDO2";
+                    regulator-name = "mt6360,ldo2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo3 {
+                    regulator-compatible = "LDO3";
+                    regulator-name = "mt6360,ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo5 {
+                    regulator-compatible = "LDO5";
+                    regulator-name = "mt6360,ldo5";
+                    regulator-min-microvolt = <2700000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+            };
+
+            tcpc {
+                compatible = "mediatek,mt6360-tcpc";
+                interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "PD_IRQB";
+
+                connector {
+                    compatible = "usb-c-connector";
+                    label = "USB-C";
+                    data-role = "dual";
+                    power-role = "dual";
+                    try-power-role = "sink";
+                    source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    op-sink-microwatt = <10000000>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            endpoint {
+                                remote-endpoint = <&usb_hs>;
+                            };
+                        };
+                        port@1 {
+                            reg = <1>;
+                            endpoint {
+                                remote-endpoint = <&usb_ss>;
+                          };
+                        };
+                        port@2 {
+                            reg = <2>;
+                            endpoint {
+                                remote-endpoint = <&dp_aux>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
new file mode 100644
index 000000000000..5644882db2e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 SubPMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MT6370 is a highly-integrated smart power management IC, which includes a
+  single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
+  Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
+  driver, a backlight WLED driver, a display bias driver and a general LDO for
+  portable devices.
+
+properties:
+  compatible:
+    const: mediatek,mt6370
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  adc:
+    type: object
+    description: |
+      Provides 9 channels for system monitoring, including VBUSDIV5 (lower
+      accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
+      measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
+
+    properties:
+      compatible:
+        const: mediatek,mt6370-adc
+
+      "#io-channel-cells":
+        const: 1
+
+    required:
+      - compatible
+      - "#io-channel-cells"
+
+  backlight:
+    type: object
+    $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml#
+
+  tcpc:
+    type: object
+    $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml#
+
+  indicator:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-indicator.yaml#
+
+  flashlight:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml#
+
+  regulators:
+    type: object
+    description: |
+      List all supported regulators, which support the control for DisplayBias
+      voltages and one general purpose LDO which commonly used to drive the
+      vibrator.
+
+    patternProperties:
+      "^(dsvbst|vibldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^(dsvpos|dsvneg)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - regulators
+  - adc
+  - backlight
+  - indicator
+  - tcpc
+  - charger
+  - flashlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@34 {
+        compatible = "mediatek,mt6370";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        mt6370_adc: adc {
+          compatible = "mediatek,mt6370-adc";
+          #io-channel-cells = <1>;
+        };
+
+        backlight {
+          compatible = "mediatek,mt6370-backlight";
+          mediatek,bled-channel-use = /bits/ 8 <15>;
+        };
+
+        charger {
+          compatible = "mediatek,mt6370-charger";
+          interrupts = <68>, <48>, <6>;
+          interrupt-names = "uvp_d_evt", "attach_i", "mivr";
+          io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
+
+          mt6370_otg_vbus: usb-otg-vbus-regulator {
+            regulator-name = "mt6370-usb-otg-vbus";
+            regulator-min-microvolt = <4350000>;
+            regulator-max-microvolt = <5800000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
+          };
+        };
+
+        indicator {
+          compatible = "mediatek,mt6370-indicator";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          multi-led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RGB>;
+            led-max-microamp = <24000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led@0 {
+              reg = <0>;
+              color = <LED_COLOR_ID_RED>;
+            };
+            led@1 {
+              reg = <1>;
+              color = <LED_COLOR_ID_GREEN>;
+            };
+            led@2 {
+              reg = <2>;
+              color = <LED_COLOR_ID_BLUE>;
+            };
+          };
+          led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <6000>;
+          };
+        };
+
+        flashlight {
+          compatible = "mediatek,mt6370-flashlight";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          led@0 {
+            reg = <0>;
+            led-sources = <0>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+          led@1 {
+            reg = <1>;
+            led-sources = <1>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+        };
+
+        tcpc {
+          compatible = "mediatek,mt6370-tcpc";
+          interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>;
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            vbus-supply = <&mt6370_otg_vbus>;
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+
+        regulators {
+          dsvbst {
+            regulator-name = "mt6370-dsv-vbst";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6200000>;
+          };
+          dsvpos {
+            regulator-name = "mt6370-dsv-vpos";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          dsvneg {
+            regulator-name = "mt6370-dsv-vneg";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          vibldo {
+            regulator-name = "mt6370-vib-ldo";
+            regulator-min-microvolt = <1600000>;
+            regulator-max-microvolt = <4000000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
new file mode 100644
index 000000000000..c8c4812fffe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Control Processor System
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+
+description:
+  MediaTek System Control Processor System (SCPSYS) has several
+  power management tasks. The tasks include MTCMOS power
+  domain control, thermal measurement, DVFS, etc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8167-scpsys
+          - mediatek,mt8173-scpsys
+          - mediatek,mt8183-scpsys
+          - mediatek,mt8186-scpsys
+          - mediatek,mt8192-scpsys
+          - mediatek,mt8195-scpsys
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  power-controller:
+    $ref: /schemas/power/mediatek,power-controller.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    syscon@10006000 {
+      compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+      reg = <0x10006000 0x100>;
+
+      spm: power-controller {
+        compatible = "mediatek,mt8195-power-controller";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #power-domain-cells = <1>;
+
+        /* sample of power domain nodes */
+        power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+
+        power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
index f91acc42d652..5ba849d78d8a 100644
--- a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
+++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: mps,mp2629
+    enum:
+      - mps,mp2629
+      - mps,mp2733
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
new file mode 100644
index 000000000000..8bf45a5673a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ocelot Externally-Controlled Ethernet Switch
+
+maintainers:
+  - Colin Foster <colin.foster@in-advantage.com>
+
+description: |
+  The Ocelot ethernet switch family contains chips that have an internal CPU
+  (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
+  the option to be controlled externally, which is the purpose of this driver.
+
+  The switch family is a multi-port networking switch that supports many
+  interfaces. Additionally, the device can perform pin control, MDIO buses, and
+  external GPIO expanders.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7512
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  spi-max-frequency:
+    maxItems: 1
+
+patternProperties:
+  "^pinctrl@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml
+
+  "^gpio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-sgpio
+
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/net/mscc,miim.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-miim
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    ocelot_clock: ocelot-clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <125000000>;
+      };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        soc@0 {
+            compatible = "mscc,vsc7512";
+            spi-max-frequency = <2500000>;
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            mdio@7107009c {
+                compatible = "mscc,ocelot-miim";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x7107009c 0x24>;
+
+                sw_phy0: ethernet-phy@0 {
+                    reg = <0x0>;
+                };
+            };
+
+            mdio@710700c0 {
+                compatible = "mscc,ocelot-miim";
+                pinctrl-names = "default";
+                pinctrl-0 = <&miim1_pins>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x710700c0 0x24>;
+
+                sw_phy4: ethernet-phy@4 {
+                    reg = <0x4>;
+                };
+            };
+
+            gpio: pinctrl@71070034 {
+                compatible = "mscc,ocelot-pinctrl";
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&gpio 0 0 22>;
+                reg = <0x71070034 0x6c>;
+
+                sgpio_pins: sgpio-pins {
+                    pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+                    function = "sg0";
+                };
+
+                miim1_pins: miim1-pins {
+                    pins = "GPIO_14", "GPIO_15";
+                    function = "miim";
+                };
+            };
+
+            gpio@710700f8 {
+                compatible = "mscc,ocelot-sgpio";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                bus-frequency = <12500000>;
+                clocks = <&ocelot_clock>;
+                microchip,sgpio-port-ranges = <0 15>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&sgpio_pins>;
+                reg = <0x710700f8 0x100>;
+
+                sgpio_in0: gpio@0 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <0>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+
+                sgpio_out1: gpio@1 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <1>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+            };
+        };
+    };
+
+...
+
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 99a84b69a29f..0088442efca1 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -20,7 +20,8 @@ This document describes the binding for MFD device and its sub module.
 Required properties:
 compatible:
 	"mediatek,mt6323" for PMIC MT6323
-	"mediatek,mt6358" for PMIC MT6358
+	"mediatek,mt6331" for PMIC MT6331 and MT6332
+	"mediatek,mt6358" for PMIC MT6358 and MT6366
 	"mediatek,mt6359" for PMIC MT6359
 	"mediatek,mt6397" for PMIC MT6397
 
@@ -29,6 +30,7 @@ Optional subnodes:
 - rtc
 	Required properties: Should be one of follows
 		- compatible: "mediatek,mt6323-rtc"
+		- compatible: "mediatek,mt6331-rtc"
 		- compatible: "mediatek,mt6358-rtc"
 		- compatible: "mediatek,mt6397-rtc"
 	For details, see ../rtc/rtc-mt6397.txt
@@ -52,8 +54,10 @@ Optional subnodes:
 	see ../leds/leds-mt6323.txt
 
 - keys
-	Required properties:
-		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	Required properties: Should be one of the following
+		- compatible: "mediatek,mt6323-keys"
+		- compatible: "mediatek,mt6331-keys"
+		- compatible: "mediatek,mt6397-keys"
 	see ../input/mtk-pmic-keys.txt
 
 - power-controller
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
deleted file mode 100644
index 7a27c500ff63..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-          Qualcomm SPMI PMICs multi-function device bindings
-
-The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
-PMICs.  These PMICs use a QPNP scheme through SPMI interface.
-QPNP is effectively a partitioning scheme for dividing the SPMI extended
-register space up into logical pieces, and set of fixed register
-locations/definitions within these regions, with some of these regions
-specifically used for interrupt handling.
-
-The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
-interfaced to the chip via the SPMI (System Power Management Interface) bus.
-Support for multiple independent functions are implemented by splitting the
-16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
-each. A function can consume one or more of these fixed-size register regions.
-
-Required properties:
-- compatible:      Should contain one of:
-                   "qcom,pm660",
-                   "qcom,pm660l",
-                   "qcom,pm7325",
-                   "qcom,pm8004",
-                   "qcom,pm8005",
-                   "qcom,pm8019",
-                   "qcom,pm8028",
-                   "qcom,pm8110",
-                   "qcom,pm8150",
-                   "qcom,pm8150b",
-                   "qcom,pm8150c",
-                   "qcom,pm8150l",
-                   "qcom,pm8226",
-                   "qcom,pm8350c",
-                   "qcom,pm8841",
-                   "qcom,pm8901",
-                   "qcom,pm8909",
-                   "qcom,pm8916",
-                   "qcom,pm8941",
-                   "qcom,pm8950",
-                   "qcom,pm8994",
-                   "qcom,pm8998",
-                   "qcom,pma8084",
-                   "qcom,pmd9635",
-                   "qcom,pmi8950",
-                   "qcom,pmi8962",
-                   "qcom,pmi8994",
-                   "qcom,pmi8998",
-                   "qcom,pmk8002",
-                   "qcom,pmk8350",
-                   "qcom,pmr735a",
-                   "qcom,smb2351",
-                   or generalized "qcom,spmi-pmic".
-- reg:             Specifies the SPMI USID slave address for this device.
-                   For more information see:
-                   Documentation/devicetree/bindings/spmi/spmi.yaml
-
-Required properties for peripheral child nodes:
-- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
-
-Optional properties for peripheral child nodes:
-- interrupts:      Interrupts are specified as a 4-tuple. For more information
-                   see:
-                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
-- interrupt-names: Corresponding interrupt name to the interrupts property
-
-Each child node of SPMI slave id represents a function of the PMIC. In the
-example below the rtc device node represents a peripheral of pm8941
-SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-
-		pm8941@0 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x0 SPMI_USID>;
-
-			rtc {
-				compatible = "qcom,rtc";
-				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "alarm";
-			};
-		};
-
-		pm8941@1 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x1 SPMI_USID>;
-
-			regulator {
-				compatible = "qcom,regulator";
-				regulator-name = "8941_boost";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
new file mode 100644
index 000000000000..6a3e3ede1ede
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMICs multi-function device
+
+description: |
+  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
+  to the chip via the SPMI (System Power Management Interface) bus.
+  Support for multiple independent functions are implemented by splitting the
+  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
+  each. A function can consume one or more of these fixed-size register regions.
+
+  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
+  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
+  QPNP is effectively a partitioning scheme for dividing the SPMI extended
+  register space up into logical pieces, and set of fixed register
+  locations/definitions within these regions, with some of these regions
+  specifically used for interrupt handling.
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  $nodename:
+    oneOf:
+      - pattern: '^pmic@.*$'
+      - pattern: '^pm(a|s)?[0-9]*@.*$'
+        deprecated: true
+
+  compatible:
+    items:
+      - enum:
+          - qcom,pm6150
+          - qcom,pm6150l
+          - qcom,pm6350
+          - qcom,pm660
+          - qcom,pm660l
+          - qcom,pm7250b
+          - qcom,pm7325
+          - qcom,pm8004
+          - qcom,pm8005
+          - qcom,pm8009
+          - qcom,pm8019
+          - qcom,pm8028
+          - qcom,pm8110
+          - qcom,pm8150
+          - qcom,pm8150b
+          - qcom,pm8150c
+          - qcom,pm8150l
+          - qcom,pm8226
+          - qcom,pm8350
+          - qcom,pm8350b
+          - qcom,pm8350c
+          - qcom,pm8841
+          - qcom,pm8909
+          - qcom,pm8916
+          - qcom,pm8941
+          - qcom,pm8950
+          - qcom,pm8953
+          - qcom,pm8994
+          - qcom,pm8998
+          - qcom,pma8084
+          - qcom,pmd9635
+          - qcom,pmi8950
+          - qcom,pmi8962
+          - qcom,pmi8994
+          - qcom,pmi8998
+          - qcom,pmk8002
+          - qcom,pmk8350
+          - qcom,pmm8155au
+          - qcom,pmp8074
+          - qcom,pmr735a
+          - qcom,pmr735b
+          - qcom,pms405
+          - qcom,pmx55
+          - qcom,pmx65
+          - qcom,smb2351
+      - const: qcom,spmi-pmic
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  labibb:
+    type: object
+    $ref: /schemas/regulator/qcom-labibb-regulator.yaml#
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
+
+  "^adc-tm@[0-9a-f]+$":
+    type: object
+    # ref depends on compatible, see allOf below
+
+  "^audio-codec@[0-9a-f]+$":
+    type: object
+    additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet
+
+  "extcon@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
+
+  "gpio(s)?@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
+
+  "pon@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/power/reset/qcom,pon.yaml#
+
+  "pwm@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
+  "^rtc@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
+
+  "^temp-alarm@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
+
+  "^vibrator@[0-9a-f]+$":
+    type: object
+    additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet
+
+  "^mpps@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
+
+  "(.*)?(wled|leds)@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/backlight/qcom-wled.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998
+    then:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+    else:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spmi@c440000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg = <0x0c440000 0x1100>,
+              <0x0c600000 0x2000000>,
+              <0x0e600000 0x100000>,
+              <0x0e700000 0xa0000>,
+              <0x0c40a000 0x26000>;
+        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+        interrupt-names = "periph_irq";
+        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <4>;
+
+        pmi8998_lsid0: pmic@2 {
+            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+            reg = <0x2 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmi8998_gpio: gpios@c000 {
+                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+                reg = <0xc000>;
+                gpio-controller;
+                gpio-ranges = <&pmi8998_gpio 0 0 14>;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm6150", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8998-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            pwrkey {
+                compatible = "qcom,pm8941-pwrkey";
+                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                debounce = <15625>;
+                bias-pull-up;
+                linux,code = <KEY_POWER>;
+            };
+        };
+
+        temp-alarm@2400 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0x2400>;
+            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+            io-channel-names = "thermal";
+            #thermal-sensor-cells = <0>;
+        };
+
+        pm6150_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            adc-chan@6 {
+                reg = <ADC5_DIE_TEMP>;
+                label = "die_temp";
+            };
+
+            adc-chan@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            charger-thermistor@0 {
+                reg = <0>;
+                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+
+        pm6150_gpio: gpios@c000 {
+            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+            reg = <0xc000>;
+            gpio-controller;
+            gpio-ranges = <&pm6150_gpio 0 0 10>;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
deleted file mode 100644
index c5f4f0ddfcc3..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-QCOM Top Control and Status Register
-
-Qualcomm devices have a set of registers that provide various control and status
-functions for their peripherals.  This node is intended to allow access to these
-registers via syscon.
-
-Required properties:
-- compatible:	Should contain:
-		"qcom,tcsr-ipq6018", "syscon", "simple-mfd" for IPQ6018
-		"qcom,tcsr-ipq8064", "syscon" for IPQ8064
-		"qcom,tcsr-apq8064", "syscon" for APQ8064
-		"qcom,tcsr-msm8660", "syscon" for MSM8660
-		"qcom,tcsr-msm8960", "syscon" for MSM8960
-		"qcom,tcsr-msm8974", "syscon" for MSM8974
-		"qcom,tcsr-apq8084", "syscon" for APQ8084
-		"qcom,tcsr-msm8916", "syscon" for MSM8916
-- reg: Address range for TCSR registers
-
-Example:
-	tcsr: syscon@1a400000 {
-		compatible = "qcom,tcsr-msm8960", "syscon";
-		reg = <0x1a400000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
new file mode 100644
index 000000000000..b12809b5cc22
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Top Control and Status Register
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm devices have a set of registers that provide various control and
+  status functions for their peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8998-tcsr
+          - qcom,qcs404-tcsr
+          - qcom,sc7180-tcsr
+          - qcom,sc7280-tcsr
+          - qcom,sdm630-tcsr
+          - qcom,sdm845-tcsr
+          - qcom,sm8150-tcsr
+          - qcom,tcsr-apq8064
+          - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq6018
+          - qcom,tcsr-ipq8064
+          - qcom,tcsr-mdm9615
+          - qcom,tcsr-msm8660
+          - qcom,tcsr-msm8916
+          - qcom,tcsr-msm8953
+          - qcom,tcsr-msm8960
+          - qcom,tcsr-msm8974
+          - qcom,tcsr-msm8996
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1a400000 {
+        compatible = "qcom,tcsr-msm8960", "syscon";
+        reg = <0x1a400000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 2568736701be..61bd0b3ce02f 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PM8xxx PMIC multi-function devices
 
 maintainers:
-  - Satya Priya <skakit@codeaurora.org>
+  - Satya Priya <quic_c_skakit@quicinc.com>
 
 description: |
   The PM8xxx family of Power Management ICs are used to provide regulated
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
new file mode 100644
index 000000000000..f73b8b25d7d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5120 PMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5120 provides four high-efficiency buck converters and one LDO voltage
+  regulator. The device is targeted at providingthe processor voltage, memory,
+  I/O, and peripheral rails in home entertainment devices. The I2C interface is
+  used for dynamic voltage scaling of the processor voltage, power rails on/off
+  sequence control, operation mode selection.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5120
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  wakeup-source: true
+
+  richtek,enable-undervolt-hiccup:
+    type: boolean
+    description: |
+      If used, under voltage protection trigger hiccup behavior, else latchup as
+      default
+
+  richtek,enable-overvolt-hiccup:
+    type: boolean
+    description:
+      Like as 'enable-uv-hiccup', it configures over voltage protection to
+      hiccup, else latchup as default
+
+  vin1-supply:
+    description: phandle for buck1 input power source
+
+  vin2-supply:
+    description: phandle for buck2 input power source
+
+  vin3-supply:
+    description: phandle for buck3 input power source
+
+  vin4-supply:
+    description: phandle for buck4 input power source
+
+  vinldo-supply:
+    description: phandle for ldo input power source
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+              Used to specify the allowed buck converter operating mode
+              mode mapping:
+                0: auto mode
+                1: force pwm mode
+            items:
+              enum: [0, 1]
+
+      "^(ldo|exten)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  powerkey:
+    type: object
+    description:
+      PON key that connected to RT5120 PMIC.
+
+    properties:
+      compatible:
+        enum:
+          - richtek,rt5120-pwrkey
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - regulators
+  - powerkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "richtek,rt5120";
+        reg = <0x62>;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        wakeup-source;
+
+        regulators {
+          buck1 {
+            regulator-name = "rt5120-buck1";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1393750>;
+            regulator-allowed-modes = <0 1>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5120-buck2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "rt5120-buck3";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "rt5120-buck4";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          ldo {
+            regulator-name = "rt5120-ldo";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+          exten {
+            regulator-name = "rt5120-exten";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+        };
+        powerkey {
+          compatible = "richtek,rt5120-pwrkey";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
deleted file mode 100644
index 23a17a6663ec..000000000000
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ /dev/null
@@ -1,465 +0,0 @@
-RK8XX Power Management Integrated Circuit
-
-The rk8xx family current members:
-rk805
-rk808
-rk809
-rk817
-rk818
-
-Required properties:
-- compatible: "rockchip,rk805"
-- compatible: "rockchip,rk808"
-- compatible: "rockchip,rk809"
-- compatible: "rockchip,rk817"
-- compatible: "rockchip,rk818"
-- reg: I2C slave address
-- interrupts: the interrupt outputs of the controller.
-- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
-  outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
-
-Optional properties:
-- clock-output-names: From common clock binding to override the
-  default output clock name
-- rockchip,system-power-controller: Telling whether or not this pmic is controlling
-  the system power.
-- wakeup-source: Device can be used as a wakeup source.
-
-Optional RK805 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc6-supply:  The input supply for LDO_REG3
-
-Optional RK808 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
-- vcc10-supply: The input supply for LDO_REG6
-- vcc11-supply: The input supply for LDO_REG8
-- vcc12-supply: The input supply for SWITCH_REG2
-- dvs-gpios:  buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
-  for 2 host gpio's used for dvs. The format of the gpio specifier depends in
-  the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
-  very quickly with no slow ramp time.
-
-Optional shared RK809 and RK817 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
-- vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
-- vcc7-supply:  The input supply for LDO_REG7, LDO_REG8, LDO_REG9
-
-Optional RK809 properties:
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
-
-Optional RK817 properties:
-- clocks:	The input clock for the audio codec
-- clock-names:	The clock name for the codec clock. Should be "mclk".
-- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0.
-
-- vcc8-supply:  The input supply for BOOST
-- vcc9-supply:  The input supply for OTG_SWITCH
-- codec:	The child node for the codec to hold additional properties.
-		If no additional properties are required for the codec, this
-		node can be omitted.
-
-- rockchip,mic-in-differential: Telling if the microphone uses differential
-				mode. Should be under the codec child node.
-
-Optional RK818 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- boost-supply: The input supply for DCDC_BOOST
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
-- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
-- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
-- h_5v-supply:  The input supply for HDMI_SWITCH
-- usb-supply:   The input supply for OTG_SWITCH
-
-Regulators: All the regulators of RK8XX to be instantiated shall be
-listed in a child node named 'regulators'. Each regulator is represented
-by a child node of the 'regulators' node.
-
-	regulator-name {
-		/* standard regulator bindings here */
-	};
-
-Following regulators of the RK805 PMIC regulators are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK805 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 3
-
-Following regulators of the RK808 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK808 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 8.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2
-
-Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK809 and RK817 datasheets.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 5 for RK809.
-		- valid values for n are 1 to 4 for RK817.
-	- LDO_REGn
-		- valid values for n are 1 to 9 for RK809.
-		- valid values for n are 1 to 9 for RK817.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2 for RK809.
-	- BOOST for RK817
-	- OTG_SWITCH for RK817
-
-Following regulators of the RK818 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK818 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 9.
-	- SWITCH_REG
-	- HDMI_SWITCH
-	- OTG_SWITCH
-
-It is necessary to configure three pins for both the RK809 and RK817, the three
-pins are "gpio_ts" "gpio_gt" "gpio_slp".
-	The gpio_gt and gpio_ts pins support the gpio function.
-	The gpio_slp pin is for controlling the pmic states, as below:
-		- reset
-		- power down
-		- sleep
-
-Standard regulator bindings are used inside regulator subnodes. Check
-  Documentation/devicetree/bindings/regulator/regulator.txt
-for more details
-
-Example:
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		clock-output-names = "xin32k", "rk808-clkout2";
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
-		dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
-			    <&gpio7 15 GPIO_ACTIVE_HIGH>;
-		reg = <0x1b>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-
-		vcc8-supply = <&vcc_18>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vccio_pmu>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-name = "vdd_arm";
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-			};
-
-			vccio_pmu: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_pmu";
-			};
-
-			vcc_tp: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_tp";
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-			};
-
-			vcc18_lcd: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-			};
-
-			vcca_codec: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
-			};
-
-			vcc_wl: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_wl";
-			};
-
-			vcc_lcd: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_lcd";
-			};
-		};
-	};
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
new file mode 100644
index 000000000000..4992f71b6fc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK805 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD
+  that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG3.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-3])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@18 {
+            compatible = "rockchip,rk805";
+            reg = <0x18>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <0>;
+
+            vcc1-supply = <&vcc_sys>;
+            vcc2-supply = <&vcc_sys>;
+            vcc3-supply = <&vcc_sys>;
+            vcc4-supply = <&vcc_sys>;
+            vcc5-supply = <&vcc_io>;
+            vcc6-supply = <&vcc_io>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-name = "vcc_io";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_18: LDO_REG1 {
+                    regulator-name = "vdd_18";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc18_emmc: LDO_REG2 {
+                    regulator-name = "vcc_18emmc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_11: LDO_REG3 {
+                    regulator-name = "vdd_11";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
new file mode 100644
index 000000000000..f5908fa01a61
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK808 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk808
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3 and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG4 and LDO_REG5.
+
+  vcc10-supply:
+    description:
+      The input supply for LDO_REG6.
+
+  vcc11-supply:
+    description:
+      The input supply for LDO_REG8.
+
+  vcc12-supply:
+    description:
+      The input supply for SWITCH_REG2.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  dvs-gpios:
+    description: |
+      buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for
+      2 host gpio's used for dvs. The format of the gpio specifier
+      depends in the gpio controller. If DVS GPIOs aren't present,
+      voltage changes will happen very quickly with no slow ramp time.
+    maxItems: 2
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
+            dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+                <&gpio7 15 GPIO_ACTIVE_HIGH>;
+            reg = <0x1b>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc8-supply = <&vcc_18>;
+            vcc9-supply = <&vcc_io>;
+            vcc10-supply = <&vcc_io>;
+            vcc12-supply = <&vcc_io>;
+            vddio-supply = <&vccio_pmu>;
+
+            regulators {
+                vdd_cpu: DCDC_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-name = "vdd_arm";
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-name = "vdd_gpu";
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_ddr";
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_io";
+                };
+
+                vccio_pmu: LDO_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_pmu";
+                };
+
+                vcc_tp: LDO_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_tp";
+                };
+
+                vdd_10: LDO_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd_10";
+                };
+
+                vcc18_lcd: LDO_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc18_lcd";
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_sd";
+                };
+
+                vdd10_lcd: LDO_REG6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd10_lcd";
+                };
+
+                vcc_18: LDO_REG7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc_18";
+                };
+
+                vcca_codec: LDO_REG8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcca_codec";
+                };
+
+                vcc_wl: SWITCH_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_wl";
+                };
+
+                vcc_lcd: SWITCH_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_lcd";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
new file mode 100644
index 000000000000..7fb849ac74a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
@@ -0,0 +1,284 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK809 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk809
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for DCDC_REG5 and SWITCH_REG2.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            reg = <0x1b>;
+            #clock-cells = <1>;
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio3>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l_pin>;
+            rockchip,system-power-controller;
+            wakeup-source;
+
+            vcc1-supply = <&vcc_sysin>;
+            vcc2-supply = <&vcc_sysin>;
+            vcc3-supply = <&vcc_sysin>;
+            vcc4-supply = <&vcc_sysin>;
+            vcc6-supply = <&vcc_sysin>;
+            vcc7-supply = <&vcc_sysin>;
+            vcc8-supply = <&vcc3v3_sys>;
+            vcc9-supply = <&vcc_sysin>;
+            vcc10-supply = <&vcc_sysin>;
+            vcc11-supply = <&vcc_sysin>;
+            vcc12-supply = <&vcc3v3_sys>;
+
+            regulators {
+                vdd_center: DCDC_REG1 {
+                    regulator-name = "vdd_center";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_cpu_l: DCDC_REG2 {
+                    regulator-name = "vdd_cpu_l";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v8: vcc_wl: DCDC_REG4 {
+                    regulator-name = "vcc_1v8";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc1v8_pmupll: LDO_REG3 {
+                    regulator-name = "vcc1v8_pmupll";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_sdio: LDO_REG4 {
+                    regulator-name = "vcc_sdio";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcca3v0_codec: LDO_REG5 {
+                    regulator-name = "vcca3v0_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_1v5: LDO_REG6 {
+                    regulator-name = "vcc_1v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1500000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1500000>;
+                    };
+                };
+
+                vcca1v8_codec: LDO_REG7 {
+                    regulator-name = "vcca1v8_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_3v0: LDO_REG8 {
+                    regulator-name = "vcc_3v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcc3v3_s3: SWITCH_REG1 {
+                    regulator-name = "vcc3v3_s3";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc3v3_s0: SWITCH_REG2 {
+                    regulator-name = "vcc3v3_s0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
new file mode 100644
index 000000000000..935e17099213
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK817 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, a power button, an audio codec, and a
+  battery charger manager.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk817
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for BOOST.
+
+  vcc9-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
+        type: object
+        unevaluatedProperties: false
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    description:
+      The input clock for the audio codec.
+
+  clock-names:
+    description:
+      The clock name for the codec clock.
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    description:
+      Needed for the interpretation of sound dais.
+    const: 0
+
+  codec:
+    description: |
+      The child node for the codec to hold additional properties. If no
+      additional properties are required for the codec, this node can be
+      omitted.
+    type: object
+    additionalProperties: false
+    properties:
+      rockchip,mic-in-differential:
+        type: boolean
+        description:
+          Describes if the microphone uses differential mode.
+
+  charger:
+    description: |
+      The child node for the charger to hold additional properties. If a
+      battery is not in use, this node can be omitted.
+    type: object
+    properties:
+      monitored-battery:
+        description: |
+          A phandle to a monitored battery node that contains a valid
+          value for:
+          charge-full-design-microamp-hours,
+          charge-term-current-microamp,
+          constant-charge-current-max-microamp,
+          constant-charge-voltage-max-microvolt,
+          voltage-max-design-microvolt,
+          voltage-min-design-microvolt,
+          and a valid ocv-capacity table.
+
+      rockchip,resistor-sense-micro-ohms:
+        description: |
+          Value in microohms of the battery sense resistor. This value is
+          used by the driver to set the correct divisor value to translate
+          ADC readings into the proper units of measure.
+        enum: [10000, 20000]
+
+      rockchip,sleep-enter-current-microamp:
+        description: |
+          Value in microamps of the sleep enter current for the charger.
+          Value is used by the driver to calibrate the relax threshold.
+
+      rockchip,sleep-filter-current-microamp:
+        description:
+          Value in microamps of the sleep filter current for the charger.
+          Value is used by the driver to derive the sleep sample current.
+
+    required:
+      - monitored-battery
+      - rockchip,resistor-sense-micro-ohms
+      - rockchip,sleep-enter-current-microamp
+      - rockchip,sleep-filter-current-microamp
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk817: pmic@20 {
+            compatible = "rockchip,rk817";
+            reg = <0x20>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+            clock-output-names = "rk808-clkout1", "xin32k";
+            clock-names = "mclk";
+            clocks = <&cru SCLK_I2S1_OUT>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+            wakeup-source;
+            #clock-cells = <1>;
+            #sound-dai-cells = <0>;
+
+            vcc1-supply = <&vccsys>;
+            vcc2-supply = <&vccsys>;
+            vcc3-supply = <&vccsys>;
+            vcc4-supply = <&vccsys>;
+            vcc5-supply = <&vccsys>;
+            vcc6-supply = <&vccsys>;
+            vcc7-supply = <&vccsys>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_3v3: DCDC_REG4 {
+                    regulator-name = "vcc_3v3";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_1v8: LDO_REG2 {
+                    regulator-name = "vcc_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc3v3_pmu: LDO_REG4 {
+                    regulator-name = "vcc3v3_pmu";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-name = "vccio_sd";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_sd: LDO_REG6 {
+                    regulator-name = "vcc_sd";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_bl: LDO_REG7 {
+                    regulator-name = "vcc_bl";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_lcd: LDO_REG8 {
+                    regulator-name = "vcc_lcd";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <2800000>;
+                    };
+                };
+
+                vcc_cam: LDO_REG9 {
+                    regulator-name = "vcc_cam";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+            };
+
+            rk817_charger: charger {
+                monitored-battery = <&battery>;
+                rockchip,resistor-sense-micro-ohms = <10000>;
+                rockchip,sleep-enter-current-microamp = <300000>;
+                rockchip,sleep-filter-current-microamp = <100000>;
+            };
+
+            rk817_codec: codec {
+                rockchip,mic-in-differential;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
new file mode 100644
index 000000000000..b57c4b005cf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK818 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk818
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  boost-supply:
+    description:
+      The input supply for DCDC_BOOST
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3, LDO_REG5, and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG6, and LDO_REG8.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG9 and SWITCH_REG.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  h_5v-supply:
+    description:
+      The input supply for HDMI_SWITCH.
+
+  usb-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk818: pmic@1c {
+            compatible = "rockchip,rk818";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc1-supply = <&vdd_sys>;
+            vcc2-supply = <&vdd_sys>;
+            vcc3-supply = <&vdd_sys>;
+            vcc4-supply = <&vdd_sys>;
+            boost-supply = <&vdd_in_otg_out>;
+            vcc6-supply = <&vdd_sys>;
+            vcc7-supply = <&vdd_misc_1v8>;
+            vcc8-supply = <&vdd_misc_1v8>;
+            vcc9-supply = <&vdd_3v3_io>;
+            vddio-supply = <&vdd_3v3_io>;
+
+            regulators {
+                vdd_log: DCDC_REG1 {
+                    regulator-name = "vdd_log";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-name = "vdd_gpu";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vdd_3v3_io: DCDC_REG4 {
+                    regulator-name = "vdd_3v3_io";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_sys: DCDC_BOOST {
+                    regulator-name = "vdd_sys";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <5000000>;
+                    };
+                };
+
+                vdd_sd: SWITCH_REG {
+                    regulator-name = "vdd_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_eth_2v5: LDO_REG2 {
+                    regulator-name = "vdd_eth_2v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <2500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2500000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_lcd_ldo: LDO_REG4 {
+                    regulator-name = "vdd_1v8_lcd_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0_lcd: LDO_REG6 {
+                    regulator-name = "vdd_1v0_lcd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_ldo: LDO_REG7 {
+                    regulator-name = "vdd_1v8_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_io_sd: LDO_REG9 {
+                    regulator-name = "vdd_io_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index fe265bcab50d..fbface720678 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -74,7 +74,7 @@ properties:
   rohm,enable-hidden-gpo:
     description: |
       The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
-      data-sheet as it's location in the middle of GND pins makes it hard to
+      data-sheet as its location in the middle of GND pins makes it hard to
       use on PCB. If your board has managed to use this pin you can enable the
       second GPO by defining this property. Dont enable this if you are unsure
       about how the E5 pin is connected on your board.
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
deleted file mode 100644
index 30ea27c3936d..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
-
-Required properties:
-
- - compatible		: "samsung,exynos5433-lpass"
- - reg			: should contain the LPASS top SFR region location
-			  and size
- - clock-names		: should contain following required clocks: "sfr0_ctrl"
- - clocks		: should contain clock specifiers of all clocks, which
-			  input names have been specified in clock-names
-			  property, in same order.
- - #address-cells	: should be 1
- - #size-cells		: should be 1
- - ranges		: must be present
-
-Each IP block of the Low Power Audio Subsystem should be specified as
-an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
-UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
-
-Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.yaml
-  ../sound/samsung-i2s.txt
-  ../dma/arm-pl330.txt
-
-
-Example:
-
-audio-subsystem {
-	compatible = "samsung,exynos5433-lpass";
-	reg = <0x11400000 0x100>, <0x11500000 0x08>;
-	clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
-	clock-names = "sfr0_ctrl";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	adma: adma@11420000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x11420000 0x1000>;
-		interrupts = <0 73 0>;
-		clocks = <&cmu_aud CLK_ACLK_DMAC>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	i2s0: i2s0@11440000 {
-		compatible = "samsung,exynos7-i2s";
-		reg = <0x11440000 0x100>;
-		dmas = <&adma 0 &adma 2>;
-		dma-names = "tx", "rx";
-		interrupts = <0 70 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_I2S_BCLK>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	serial_3: serial@11460000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x11460000 0x100>;
-		interrupts = <0 67 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
-			 <&cmu_aud CLK_SCLK_AUD_UART>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart_aud_bus>;
-	};
- };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
new file mode 100644
index 000000000000..b97b06848729
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5433-lpass
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sfr0_ctrl
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-controller@[0-9a-f]+$":
+    $ref: /schemas/dma/arm,pl330.yaml
+
+  "^i2s@[0-9a-f]+$":
+    $ref: /schemas/sound/samsung-i2s.yaml
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - reg
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    audio-subsystem@11400000 {
+        compatible = "samsung,exynos5433-lpass";
+        reg = <0x11400000 0x100>, <0x11500000 0x08>;
+        clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+        clock-names = "sfr0_ctrl";
+        power-domains = <&pd_aud>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        dma-controller@11420000 {
+            compatible = "arm,pl330", "arm,primecell";
+            reg = <0x11420000 0x1000>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_ACLK_DMAC>;
+            clock-names = "apb_pclk";
+            #dma-cells = <1>;
+            dma-channels = <8>;
+            dma-requests = <32>;
+            power-domains = <&pd_aud>;
+        };
+
+        i2s@11440000 {
+            compatible = "samsung,exynos7-i2s";
+            reg = <0x11440000 0x100>;
+            dmas = <&adma 0>, <&adma 2>;
+            dma-names = "tx", "rx";
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_I2S_BCLK>;
+            clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+            #clock-cells = <1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&i2s0_bus>;
+            power-domains = <&pd_aud>;
+            #sound-dai-cells = <1>;
+        };
+
+        serial@11460000 {
+            compatible = "samsung,exynos5433-uart";
+            reg = <0x11460000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+                     <&cmu_aud CLK_SCLK_AUD_UART>;
+            clock-names = "uart", "clk_uart_baud0";
+            pinctrl-names = "default";
+            pinctrl-0 = <&uart_aud_bus>;
+            power-domains = <&pd_aud>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
index 017befdf8adb..055dfc337c2f 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPA01 Power Management IC
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index 771b3f16da96..5ff6546c72b7 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
index 5531718abdf0..10c7b408f33a 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S5M8767 Power Management IC
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..ee0be32ac020
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+properties:
+  compatible:
+    const: silergy,sy7636a
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  epd-pwr-good-gpios:
+    description:
+      Specifying the power good GPIOs.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          The regulator for the compenstation voltage. Enabling/disabling this
+          enables/disables the entire device.
+        properties:
+          regulator-name:
+            const: vcom
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "silergy,sy7636a";
+        reg = <0x62>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_epdpmic>;
+        #thermal-sensor-cells = <0>;
+
+        regulators {
+          reg_epdpmic: vcom {
+            regulator-name = "vcom";
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
new file mode 100644
index 000000000000..996bd4a17ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc System Global Register
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  Unisoc system global registers provide register map
+  for clocks and some multimedia modules of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: sprd,ums512-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/sprd,ums512-clk.yaml#
+    description:
+      Clock controller for the SoC clocks.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_apb_regs: syscon@71000000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x71000000 0x3000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x71000000 0x3000>;
+
+      clock-controller@0 {
+        compatible = "sprd,ums512-apahb-gate";
+        reg = <0x0 0x2000>;
+        #clock-cells = <1>;
+      };
+    };
+
+  - |
+    ap_intc5_regs: syscon@32360000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x32360000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index ec7f0190f46e..d950dd5d48bd 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -46,6 +46,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -58,43 +59,46 @@ properties:
       - "#pwm-cells"
       - compatible
 
-patternProperties:
-  "^trigger@[0-9]+$":
+  counter:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-trigger
-
-      reg:
-        description: Identify trigger hardware block.
-        items:
-          minimum: 0
-          maximum: 2
+        const: st,stm32-lptimer-counter
 
     required:
       - compatible
-      - reg
 
-  counter:
+  timer:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-counter
+        const: st,stm32-lptimer-timer
 
     required:
       - compatible
 
-  timer:
+patternProperties:
+  "^trigger@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-timer
+        const: st,stm32-lptimer-trigger
+
+      reg:
+        description: Identify trigger hardware block.
+        items:
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
+      - reg
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index 10b330d42901..e2c3c3b44abb 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -33,7 +33,7 @@ properties:
     items:
       - const: int
 
-  reset:
+  resets:
     maxItems: 1
 
   dmas:
@@ -46,6 +46,21 @@ properties:
     minItems: 1
     maxItems: 7
 
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: global
+      - items:
+          - const: brk
+          - const: up
+          - const: trg-com
+          - const: cc
+
   "#address-cells":
     const: 1
 
@@ -54,6 +69,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -87,9 +103,21 @@ properties:
       - "#pwm-cells"
       - compatible
 
+  counter:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-timer-counter
+
+    required:
+      - compatible
+
 patternProperties:
   "^timer@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -107,16 +135,6 @@ patternProperties:
       - compatible
       - reg
 
-  counter:
-    type: object
-
-    properties:
-      compatible:
-        const: st,stm32-timer-counter
-
-    required:
-      - compatible
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
index b2a4e4aa7ff6..b4d54302582f 100644
--- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -57,6 +57,7 @@ properties:
     patternProperties:
       "^[a-zA-Z]*-pins$":
         type: object
+        additionalProperties: false
 
         allOf:
           - $ref: ../pinctrl/pinmux-node.yaml
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
new file mode 100644
index 000000000000..6c8d42f27fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -0,0 +1,522 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Analog Baseband AB8500 and AB8505
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
+  handling power management (regulators), analog-to-digital conversion
+  (ADC), battery charging, fuel gauging of the battery, battery-backed
+  RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
+  in connection with the DB8500 digital baseband. The DB8500 PRCMU
+  communicates directly and autonomously with the AB8500 and thus it
+  appears as a subnode of the DB8500 PRCMU. An altered version called
+  AB8505 also exist, the difference in AB8505 is that some of the USB and
+  USB charging handling has changed, and it has an embedded USB-to-serial
+  converter. Most subblocks takes their interrupts directly from the
+  AB8500 embedded interrupt controller.
+
+properties:
+  $nodename:
+    pattern: '^ab850[05]$'
+
+  compatible:
+    enum:
+      - stericsson,ab8500
+      - stericsson,ab8505
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  # Some subnodes use a reg, some don't. Those that do use a single cell.
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clock-controller:
+    description: Node describing the AB8500 clock controller. This
+      provides the reference clock for the entire U8500 system and
+      the DB8500 counterpart.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-clk
+
+      '#clock-cells':
+        const: 1
+
+  gpio:
+    description: Node describing the AB8500 GPIO controller. A few
+      GPIO pins available for misc usage.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-gpio
+          - stericsson,ab8505-gpio
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+  rtc:
+    description: Node describing the AB8500 battery-backed RTC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-rtc
+
+      interrupts:
+        items:
+          - description: 60 second interval alarm interrupt
+          - description: RTC alarm
+
+      interrupt-names:
+        items:
+          - const: 60S
+          - const: ALARM
+
+  adc:
+    description: Node describing the AB8500 general purpose analog to digital
+      converter, GPADC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-gpadc
+
+      # AB8505 only supports one (software) EOC interrupt
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      interrupt-names: true
+
+      vddadc-supply: true
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#io-channel-cells':
+        const: 1
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        $ref: ../iio/adc/adc.yaml#
+        description: Represents each of the external channels which are
+          connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 1
+              maximum: 31
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddadc-supply
+      - '#address-cells'
+      - '#size-cells'
+      - '#io-channel-cells'
+
+    additionalProperties: false
+
+  thermal:
+    description: Node describing the AB8500 thermal control block. All this block
+      really does is to fire an interrupt when the die becomes 130 degrees Celsius
+      in temperature.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,abx500-temp
+
+      interrupts:
+        items:
+          - description: Thermal warm warning interrupt
+
+      interrupt-names:
+        items:
+          - const: ABX500_TEMP_WARM
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500_fg:
+    description: Node describing the AB8500 fuel gauge control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+
+  ab8500_btemp:
+    description: Node describing the AB8500 battery temperature control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+
+  ab8500_charger:
+    description: Node describing the AB8500 battery charger control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+
+  ab8500_chargalg:
+    description: Node describing the AB8500 battery charger algorithm.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+
+  phy:
+    description: Node describing the AB8500 USB PHY control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-usb
+
+      interrupts:
+        items:
+          - description: ID wakeup rising IRQ
+          - description: ID wakeup falling IRQ
+          - description: VBUS detection falling IRQ
+          - description: VBUS detection rising IRQ
+          - description: USB link status change IRQ
+          - description: ADP probe plug IRQ
+          - description: ADP probe unplug IRQ
+
+      interrupt-names:
+        items:
+          - const: ID_WAKEUP_R
+          - const: ID_WAKEUP_F
+          - const: VBUS_DET_F
+          - const: VBUS_DET_R
+          - const: USB_LINK_STATUS
+          - const: USB_ADP_PROBE_PLUG
+          - const: USB_ADP_PROBE_UNPLUG
+
+      vddulpivio18-supply: true
+      v-ape-supply: true
+      musb_1v8-supply: true
+
+      clocks:
+        items:
+          - description: PRCMY system clock
+
+      clock-names:
+        items:
+          - const: sysclk
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddulpivio18-supply
+      - v-ape-supply
+      - musb_1v8-supply
+      - clocks
+      - clock-names
+      - '#phy-cells'
+
+    additionalProperties: false
+
+  key:
+    description: Node describing the AB8500 power-on key control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-poweron-key
+
+      interrupts:
+        items:
+          - description: ON key falling IRQ
+          - description: ON key rising IRQ
+
+      interrupt-names:
+        items:
+          - const: ONKEY_DBF
+          - const: ONKEY_DBR
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500-sysctrl:
+    description: Node describing the AB8500 system control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-sysctrl
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  codec:
+    description: Node describing the AB8500 audio codec block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-codec
+
+      V-AUD-supply: true
+      V-AMIC1-supply: true
+      V-AMIC2-supply: true
+      V-DMIC-supply: true
+
+      clocks:
+        items:
+          - description: Audio system clock
+
+      clock-names:
+        items:
+          - const: audioclk
+
+      stericsson,earpeice-cmv:
+        description: Earpeice voltage
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 950, 1100, 1270, 1580 ]
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulator:
+    description: Node describing the AB8500 internal regulators.
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-regulator
+          - stericsson,ab8505-regulator
+
+      vin-supply:
+        description: The regulator supplying all of the internal regulators
+          with power.
+
+      ab8500_ldo_aux1:
+        description: The voltage for the auxilary LDO regulator 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux2:
+        description: The voltage for the auxilary LDO regulator 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux3:
+        description: The voltage for the auxilary LDO regulator 3
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux4:
+        description: The voltage for the auxilary LDO regulator 4
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux5:
+        description: The voltage for the auxilary LDO regulator 5
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux6:
+        description: The voltage for the auxilary LDO regulator 6
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      # There is never any AUX7 regulator which is confusing
+
+      ab8500_ldo_aux8:
+        description: The voltage for the auxilary LDO regulator 8
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_intcore:
+        description: The LDO regulator for the internal core voltage
+          of the AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_adc:
+        description: Analog power regulator for the analog to digital converter
+          ADC, only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_tvout:
+        description: The voltage for the TV output regulator, incidentally
+          this voltage is also used for other purposes such as measuring
+          the temperature of the NTC thermistor on the battery.
+          Only present on AB8500.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_audio:
+        description: The LDO regulator for the audio codec output
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic1:
+        description: The LDO regulator for the analog microphone 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic2:
+        description: The LDO regulator for the analog microphone 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_dmic:
+        description: The LDO regulator for the digital microphone
+          only present on AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_ana:
+        description: Analog power regulator for CSI and DSI interfaces,
+          Camera Serial Interface CSI and Display Serial Interface DSI.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+
+  regulator-external:
+    description: Node describing the AB8500 external regulators. This
+      concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
+      that are normally controlled by external electronics but also
+      sometimes need to be explicitly controlled by software.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-ext-regulator
+
+      ab8500_ext1:
+        description: The voltage for the VSMPS1 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext2:
+        description: The voltage for the VSMPS2 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext3:
+        description: The voltage for the VSMPS3 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^pwm@[1-9]+?$":
+    type: object
+    $ref: ../pwm/pwm.yaml#
+    unevaluatedProperties: false
+    description: Represents each of the PWM blocks in the AB8500
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-pwm
+
+      reg: true
+
+      clocks:
+        items:
+          - description: internal clock
+
+      clock-names:
+        items:
+          - const: intclk
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - clock-controller
+  - gpio
+  - rtc
+  - adc
+  - thermal
+  - ab8500_fg
+  - ab8500_btemp
+  - ab8500_charger
+  - ab8500_chargalg
+  - phy
+  - key
+  - regulator
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
index a0d4bad5dc81..1d4d88f7e82d 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -263,6 +263,7 @@ patternProperties:
       set of devicetree bindings. The AB8505 is a newer version of the
       same ASIC.
     type: object
+    $ref: stericsson,ab8500.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index eeac1cbc5a17..4e4baf53796d 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/syscon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Controller Registers R/W Device Tree Bindings
+title: System Controller Registers R/W
 
 description: |
   System controller node represents a register region containing a set
@@ -17,7 +17,7 @@ description: |
   and access the registers directly.
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
 
 select:
   properties:
@@ -40,10 +40,17 @@ properties:
               - allwinner,sun50i-a64-system-controller
               - brcm,cru-clkset
               - freecom,fsg-cs2-system-controller
+              - fsl,imx93-aonmix-ns-syscfg
+              - fsl,imx93-wakeupmix-syscfg
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
               - hisilicon,peri-subctrl
+              - intel,lgm-syscon
+              - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt8135-pctl-a-syscfg
+              - mediatek,mt8135-pctl-b-syscfg
+              - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
               - rockchip,px30-qos
@@ -54,6 +61,8 @@ properties:
               - rockchip,rk3368-qos
               - rockchip,rk3399-qos
               - rockchip,rk3568-qos
+              - rockchip,rk3588-qos
+              - rockchip,rv1126-qos
               - samsung,exynos3-sysreg
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
@@ -66,7 +75,7 @@ properties:
       - contains:
           const: syscon
         minItems: 2
-        maxItems: 4  # Should be enough
+        maxItems: 5  # Should be enough
 
   reg:
     maxItems: 1
@@ -75,7 +84,6 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
 
   hwlocks:
@@ -87,6 +95,18 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
 additionalProperties: true
 
 examples:
@@ -95,12 +115,4 @@ examples:
         compatible = "allwinner,sun8i-h3-system-controller", "syscon";
         reg = <0x01c00000 0x1000>;
     };
-
-  - |
-    gpr: iomuxc-gpr@20e0000 {
-        compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-        reg = <0x020e0000 0x38>;
-        hwlocks = <&hwlock1 1>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 272832e9f8f2..873ee0c0973f 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI J721e System Controller Registers R/W Device Tree Bindings
+title: TI J721e System Controller Registers R/W
 
 description: |
   This represents the Control Module registers (CTRL_MMR0) on the SoC.
@@ -20,7 +20,7 @@ description: |
 
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
-  - Roger Quadros <rogerq@ti.com
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:
@@ -48,6 +48,18 @@ patternProperties:
     description:
       This is the SERDES lane control mux.
 
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    description:
+      Clock provider for TI EHRPWM nodes.
+
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/ti,phy-gmii-sel.yaml#
+    description:
+      The phy node corresponding to the ethernet MAC.
+
 required:
   - compatible
   - reg
@@ -79,5 +91,11 @@ examples:
                 <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
                 /* SERDES4 lane0/1/2/3 select */
         };
+
+        clock-controller@4140 {
+            compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+            reg = <0x4140 0x18>;
+            #clock-cells = <1>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
index 6aeedda3be15..3fdd9cb5b347 100644
--- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -38,6 +38,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description: |
       List of child nodes that specify the regulator initialization data.
       Child nodes must be named after their hardware counterparts:
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
index 9e762d474218..ea3337dafaf5 100644
--- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -14,6 +14,7 @@ description: |
   range of analogue I/O.
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
   - $ref: /schemas/sound/wlf,arizona.yaml#
   - $ref: /schemas/regulator/wlf,arizona.yaml#
   - $ref: /schemas/extcon/wlf,arizona.yaml#
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
index de330c9869ff..309606d2d806 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: X-Powers AC100 Device Tree Bindings
+title: X-Powers AC100
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index 3a53bae611bc..b7a8747d5fa0 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: X-Powers AXP PMIC Device Tree Bindings
+title: X-Powers AXP PMIC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -93,6 +93,9 @@ properties:
           - x-powers,axp809
           - x-powers,axp813
       - items:
+          - const: x-powers,axp228
+          - const: x-powers,axp221
+      - items:
           - const: x-powers,axp805
           - const: x-powers,axp806
       - items:
@@ -260,6 +263,7 @@ properties:
       "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$":
         $ref: /schemas/regulator/regulator.yaml#
         type: object
+        unevaluatedProperties: false
 
         properties:
           regulator-ramp-delay:
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
deleted file mode 100644
index f080f06da6d8..000000000000
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-MIPS CPU interrupt controller
-
-On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
-IRQs from a devicetree file and create a irq_domain for IRQ controller.
-
-With the irq_domain in place we can describe how the 8 IRQs are wired to the
-platforms internal interrupt controller cascade.
-
-Below is an example of a platform describing the cascade inside the devicetree
-and the code used to load it inside arch_init_irq().
-
-Required properties:
-- compatible : Should be "mti,cpu-interrupt-controller"
-
-Example devicetree:
-	cpu-irq: cpu-irq {
-		#address-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	intc: intc@200 {
-		compatible = "ralink,rt2880-intc";
-		reg = <0x200 0x100>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&cpu-irq>;
-		interrupts = <2>;
-	};
-
-
-Example platform irq.c:
-static struct of_device_id __initdata of_irq_ids[] = {
-	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
-	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
-	{},
-};
-
-void __init arch_init_irq(void)
-{
-	of_irq_init(of_irq_ids);
-}
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index 58d51f480c9e..8ec6191c1712 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -2,7 +2,7 @@ Lantiq XWAY SoC RCU binding
 ===========================
 
 This binding describes the RCU (reset controller unit) multifunction device,
-where each sub-device has it's own set of registers.
+where each sub-device has its own set of registers.
 
 The RCU register range is used for multiple purposes. Mostly one device
 uses one or multiple register exclusively, but for some registers some
diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
new file mode 100644
index 000000000000..20b5836efd90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml
index 0588cee25ae9..704b5b595127 100644
--- a/Documentation/devicetree/bindings/mips/ralink.yaml
+++ b/Documentation/devicetree/bindings/mips/ralink.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/ralink.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ralink SoC based Platforms Device Tree Bindings
+title: Ralink SoC based Platforms
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
index aadff8ce0f49..f8ac309d2994 100644
--- a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
+++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/realtek-rtl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek RTL83xx/93xx SoC series device tree bindings
+title: Realtek RTL83xx/93xx SoC series
 
 maintainers:
   - Bert Vermeulen <bert@biot.com>
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
deleted file mode 100644
index 2a1827ab50d2..000000000000
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Qualcomm Technologies, Inc. FastRPC Driver
-
-The FastRPC implements an IPC (Inter-Processor Communication)
-mechanism that allows for clients to transparently make remote method
-invocations across DSP and APPS boundaries. This enables developers
-to offload tasks to the DSP and free up the application processor for
-other tasks.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,fastrpc"
-
-- label
-	Usage: required
-	Value type: <string>
-	Definition: should specify the dsp domain name this fastrpc
-	corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
-
-- #address-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #size-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-= COMPUTE BANKS
-Each subnode of the Fastrpc represents compute context banks available
-on the dsp.
-- All Compute context banks MUST contain the following properties:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,fastrpc-compute-cb"
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Context Bank ID.
-
-- qcom,nsessions:
-	Usage: Optional
-	Value type: <u32>
-	Defination: A value indicating how many sessions can share this
-		    context bank. Defaults to 1 when this property
-		    is not specified.
-
-Example:
-
-adsp-pil {
-	compatible = "qcom,msm8996-adsp-pil";
-	...
-	smd-edge {
-		label = "lpass";
-		fastrpc {
-			compatible = "qcom,fastrpc";
-			qcom,smd-channels = "fastrpcsmd-apps-dsp";
-			label = "adsp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cb@1 {
-				compatible = "qcom,fastrpc-compute-cb";
-				reg = <1>;
-			};
-
-			cb@2 {
-				compatible = "qcom,fastrpc-compute-cb";
-				reg = <2>;
-			};
-			...
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
new file mode 100644
index 000000000000..d7576f8ac94b
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qcom,fastrpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm FastRPC Driver
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The FastRPC implements an IPC (Inter-Processor Communication)
+  mechanism that allows for clients to transparently make remote method
+  invocations across DSP and APPS boundaries. This enables developers
+  to offload tasks to the DSP and free up the application processor for
+  other tasks.
+
+properties:
+  compatible:
+    const: qcom,fastrpc
+
+  label:
+    enum:
+      - adsp
+      - mdsp
+      - sdsp
+      - cdsp
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for remote heap CMA.
+
+  qcom,glink-channels:
+    description:
+      A list of channels tied to this function, used for matching
+      the function to a set of virtual channels.
+    $ref: "/schemas/types.yaml#/definitions/string-array"
+    items:
+      - const: fastrpcglink-apps-dsp
+
+  qcom,non-secure-domain:
+    description:
+      Used to mark the current domain as non-secure.
+    type: boolean
+
+  qcom,smd-channels:
+    description:
+      Channel name used for the RPM communication
+    $ref: "/schemas/types.yaml#/definitions/string-array"
+    items:
+      - const: fastrpcsmd-apps-dsp
+
+  qcom,vmids:
+    description:
+      Virtual machine IDs for remote processor.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "(compute-)?cb@[0-9]*$":
+    type: object
+
+    description: >
+      Each subnode of the Fastrpc represents compute context banks available on the dsp.
+
+    properties:
+      compatible:
+        const: qcom,fastrpc-compute-cb
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 2
+
+      qcom,nsessions:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 1
+        description: >
+          A value indicating how many sessions can share this context bank.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - label
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    glink-edge {
+        interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                     IPCC_MPROC_SIGNAL_GLINK_QMP
+                                     IRQ_TYPE_EDGE_RISING>;
+        mboxes = <&ipcc IPCC_CLIENT_LPASS
+                        IPCC_MPROC_SIGNAL_GLINK_QMP>;
+        label = "lpass";
+        qcom,remote-pid = <2>;
+
+        fastrpc {
+            compatible = "qcom,fastrpc";
+            qcom,glink-channels = "fastrpcglink-apps-dsp";
+            label = "sdsp";
+            qcom,non-secure-domain;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compute-cb@1 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <1>;
+                iommus = <&apps_smmu 0x0541 0x0>;
+            };
+
+            compute-cb@2 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <2>;
+                iommus = <&apps_smmu 0x0542 0x0>;
+            };
+
+            compute-cb@3 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <3>;
+                iommus = <&apps_smmu 0x0543 0x0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
new file mode 100644
index 000000000000..1aebeb696ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qemu,vcpu-stall-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VCPU stall detector
+
+description:
+  This binding describes a CPU stall detector mechanism for virtual CPUs
+  which is accessed through MMIO.
+
+maintainers:
+  - Sebastian Ene <sebastianene@google.com>
+
+properties:
+  compatible:
+    enum:
+      - qemu,vcpu-stall-detector
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The internal clock of the stall detector peripheral measure in Hz used
+      to decrement its internal counter register on each tick.
+      Defaults to 10 if unset.
+    default: 10
+
+  timeout-sec:
+    description: |
+      The stall detector expiration timeout measured in seconds.
+      Defaults to 8 if unset. Please note that it also takes into account the
+      time spent while the VCPU is not running.
+    default: 8
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vmwdt@9030000 {
+      compatible = "qemu,vcpu-stall-detector";
+      reg = <0x9030000 0x10000>;
+      clock-frequency = <10>;
+      timeout-sec = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
index 4f62ad6ce50c..02ecc93417ef 100644
--- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MMC Controller Device Tree Bindings
+title: Allwinner A10 MMC Controller
 
 allOf:
   - $ref: "mmc-controller.yaml"
@@ -24,6 +24,7 @@ properties:
       - const: allwinner,sun7i-a20-mmc
       - const: allwinner,sun8i-a83t-emmc
       - const: allwinner,sun9i-a80-mmc
+      - const: allwinner,sun20i-d1-mmc
       - const: allwinner,sun50i-a64-emmc
       - const: allwinner,sun50i-a64-mmc
       - const: allwinner,sun50i-a100-emmc
@@ -50,11 +51,17 @@ properties:
           - const: allwinner,sun50i-h6-mmc
           - const: allwinner,sun50i-a64-mmc
       - items:
+          - const: allwinner,sun20i-d1-emmc
+          - const: allwinner,sun50i-a100-emmc
+      - items:
           - const: allwinner,sun50i-h616-emmc
           - const: allwinner,sun50i-a100-emmc
       - items:
           - const: allwinner,sun50i-h616-mmc
           - const: allwinner,sun50i-a100-mmc
+      - items:
+          - const: allwinner,suniv-f1c100s-mmc
+          - const: allwinner,sun7i-a20-mmc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
index 60955acb8e57..1c391bec43dc 100644
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic Meson SDHC controller Device Tree Bindings
+title: Amlogic Meson SDHC controller
 
 allOf:
   - $ref: "mmc-controller.yaml"
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index a4f74bec68a3..1e69a5a42439 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -185,6 +185,9 @@ examples:
       clock-names = "mclk", "apb_pclk";
     };
 
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     mmc@80126000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x80126000 0x1000>;
@@ -206,12 +209,12 @@ examples:
       vqmmc-supply = <&vmmci>;
     };
 
+  - |
     mmc@101f6000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x101f6000 0x1000>;
       clocks = <&sdiclk>, <&pclksdi>;
       clock-names = "mclk", "apb_pclk";
-      interrupt-parent = <&vica>;
       interrupts = <22>;
       max-frequency = <400000>;
       bus-width = <4>;
@@ -226,6 +229,7 @@ examples:
       vmmc-supply = <&vmmc_regulator>;
     };
 
+  - |
     mmc@52007000 {
       compatible = "arm,pl18x", "arm,primecell";
       arm,primecell-periphid = <0x10153180>;
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
index dccd5ad96981..dead421e17d6 100644
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Al Cooper <alcooperx@gmail.com>
   - Florian Fainelli <f.fainelli@gmail.com>
 
-allOf:
-  - $ref: mmc-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -31,7 +28,7 @@ properties:
           - const: brcm,sdhci-brcmstb
 
   reg:
-    minItems: 2
+    maxItems: 2
 
   reg-names:
     items:
@@ -42,45 +39,72 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
-    description:
-      handle to core clock for the sdhci controller.
+    minItems: 1
+    items:
+      - description: handle to core clock for the sdhci controller
+      - description: handle to improved 150Mhz clock for sdhci controller (Optional clock)
 
   clock-names:
+    minItems: 1
     items:
       - const: sw_sdio
+      - const: sdio_freq # Optional clock
+
+  clock-frequency:
+    description:
+      Maximum operating frequency of sdio_freq sdhci controller clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000000
+    maximum: 150000000
 
   sdhci,auto-cmd12:
     type: boolean
     description: Specifies that controller should use auto CMD12
 
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        clock-names:
+          contains:
+            const: sdio_freq
+
+    then:
+      required:
+        - clock-frequency
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
 examples:
   - |
     mmc@84b0000 {
-      sd-uhs-sdr50;
-      sd-uhs-ddr50;
-      sd-uhs-sdr104;
-      sdhci,auto-cmd12;
       compatible = "brcm,bcm7216-sdhci",
                    "brcm,bcm7445-sdhci",
                    "brcm,sdhci-brcmstb";
       reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
       reg-names = "host", "cfg";
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
       interrupts = <0x0 0x26 0x4>;
-      interrupt-names = "sdio0_0";
       clocks = <&scmi_clk 245>;
       clock-names = "sw_sdio";
     };
 
     mmc@84b1000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
       mmc-ddr-1_8v;
       mmc-hs200-1_8v;
       mmc-hs400-1_8v;
@@ -88,13 +112,7 @@ examples:
       supports-cqe;
       non-removable;
       bus-width = <0x8>;
-      compatible = "brcm,bcm7216-sdhci",
-           "brcm,bcm7445-sdhci",
-            "brcm,sdhci-brcmstb";
-      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
-      reg-names = "host", "cfg";
       interrupts = <0x0 0x27 0x4>;
-      interrupt-names = "sdio1_0";
       clocks = <&scmi_clk 245>;
       clock-names = "sw_sdio";
     };
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index 4207fed62dfe..8b1a0fdcb5e3 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -8,7 +8,6 @@ title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
 
 maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
-  - Piotr Sroka <piotrs@cadence.com>
 
 allOf:
   - $ref: mmc-controller.yaml
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
deleted file mode 100644
index 753e9d7d8956..000000000000
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-* Samsung Exynos specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
-	  specific extensions.
-	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
-	  specific extensions.
-	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
-	  specific extensions.
-	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
-	  specific extensions having an SMU.
-	- "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
-	  extensions.
-
-* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
-  unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
-  ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
-
-* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for single
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-
-* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for double
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
-  shift value for hs400 mode operation.
-
-  Notes for the sdr-timing and ddr-timing values:
-
-    The order of the cells should be
-      - First Cell: CIU clock phase shift value for tx mode.
-      - Second Cell: CIU clock phase shift value for rx mode.
-
-    Valid values for SDR and DDR CIU clock timing for Exynos5250:
-      - valid value for tx phase shift and rx phase shift is 0 to 7.
-      - when CIU clock divider value is set to 3, all possible 8 phase shift
-        values can be used.
-      - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
-        phase shift clocks should be 0.
-
-* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
-  (Latency value for delay line in Read path)
-
-Required properties for a slot (Deprecated - Recommend to use one slot per host):
-
-* gpios: specifies a list of gpios used for command, clock and data bus. The
-  first gpio is the command line and the second gpio is the clock line. The
-  rest of the gpios (depending on the bus-width property) are the data lines in
-  no particular order. The format of the gpio specifier depends on the gpio
-  controller.
-(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
-
-Example:
-
-  The MSHC controller node can be split into two portions, SoC specific and
-  board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc0@12200000 {
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		samsung,dw-mshc-hs400-timing = <0 2>;
-		samsung,read-strobe-delay = <90>;
-		bus-width = <8>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index 17acbc665f5a..29339d0196ec 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -34,21 +34,47 @@ properties:
           - fsl,imx6ull-usdhc
           - fsl,imx7d-usdhc
           - fsl,imx7ulp-usdhc
+          - fsl,imx8mm-usdhc
           - fsl,imxrt1050-usdhc
           - nxp,s32g2-usdhc
       - items:
           - enum:
+              - fsl,imx8mq-usdhc
+          - const: fsl,imx7d-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx8ulp-usdhc
+          - const: fsl,imx8mm-usdhc
+      - items:
+          - enum:
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+      - items:
+          - enum:
+              - fsl,imx8dxl-usdhc
               - fsl,imx8mm-usdhc
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
-              - fsl,imx8mq-usdhc
               - fsl,imx8qm-usdhc
               - fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
+        deprecated: true
       - items:
           - enum:
-              - fsl,imx8ulp-usdhc
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
           - const: fsl,imx8mm-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/litex,mmc.yaml b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
new file mode 100644
index 000000000000..ef9e0da44bf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/litex,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteSDCard device
+
+maintainers:
+  - Gabriel Somlo <gsomlo@gmail.com>
+
+description: |
+  LiteSDCard is a small footprint, configurable SDCard core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/litesdcard/.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,mmc
+
+  reg:
+    items:
+      - description: PHY registers
+      - description: CORE registers
+      - description: DMA Reader buffer
+      - description: DMA Writer buffer
+      - description: IRQ registers
+    minItems: 4
+
+  reg-names:
+    items:
+      - const: phy
+      - const: core
+      - const: reader
+      - const: writer
+      - const: irq
+    minItems: 4
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to reference clock.
+
+  vmmc-supply:
+    description:
+      Handle to fixed-voltage supply for the card power.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - vmmc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc: mmc@12005000 {
+        compatible = "litex,mmc";
+        reg = <0x12005000 0x100>,
+              <0x12003800 0x100>,
+              <0x12003000 0x100>,
+              <0x12004800 0x100>,
+              <0x12004000 0x100>;
+        reg-names = "phy", "core", "reader", "writer", "irq";
+        clocks = <&reference_clk>;
+        vmmc-supply = <&vreg_mmc>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
new file mode 100644
index 000000000000..7c9c652ad59c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,dove-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell sdhci-dove controller
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,dove-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sdio0: mmc@92000 {
+      compatible = "marvell,dove-sdhci";
+      reg = <0x92000 0x100>;
+      interrupts = <35>;
+      clocks = <&gate_clk 9>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
new file mode 100644
index 000000000000..8a97ded15aed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,orion-sdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell orion-sdio controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,orion-sdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@d00d4000 {
+      compatible = "marvell,orion-sdio";
+      reg = <0xd00d4000 0x200>;
+      interrupts = <54>;
+      clocks = <&gateclk 17>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
deleted file mode 100644
index c51a62d751dc..000000000000
--- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
+++ /dev/null
@@ -1,173 +0,0 @@
-Marvell Xenon SDHCI Controller device tree bindings
-This file documents differences between the core mmc properties
-described by mmc.txt and the properties used by the Xenon implementation.
-
-Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
-Each SDHC is independent and owns independent resources, such as register sets,
-clock and PHY.
-Each SDHC should have an independent device tree node.
-
-Required Properties:
-- compatible: should be one of the following
-  - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
-  Must provide a second register area and marvell,pad-type.
-  - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
-  - "marvell,armada-ap807-sdhci": For controllers on Armada AP807.
-  - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
-
-- clocks:
-  Array of clocks required for SDHC.
-  Require at least input clock for Xenon IP core. For Armada AP806 and
-  CP110, the AXI clock is also mandatory.
-
-- clock-names:
-  Array of names corresponding to clocks property.
-  The input clock for Xenon IP core should be named as "core".
-  The input clock for the AXI bus must be named as "axi".
-
-- reg:
-  * For "marvell,armada-3700-sdhci", two register areas.
-    The first one for Xenon IP register. The second one for the Armada 3700 SoC
-    PHY PAD Voltage Control register.
-    Please follow the examples with compatible "marvell,armada-3700-sdhci"
-    in below.
-    Please also check property marvell,pad-type in below.
-
-  * For other compatible strings, one register area for Xenon IP.
-
-Optional Properties:
-- marvell,xenon-sdhc-id:
-  Indicate the corresponding bit index of current SDHC in
-  SDHC System Operation Control Register Bit[7:0].
-  Set/clear the corresponding bit to enable/disable current SDHC.
-  If Xenon IP contains only one SDHC, this property is optional.
-
-- marvell,xenon-phy-type:
-  Xenon support multiple types of PHYs.
-  To select eMMC 5.1 PHY, set:
-  marvell,xenon-phy-type = "emmc 5.1 phy"
-  eMMC 5.1 PHY is the default choice if this property is not provided.
-  To select eMMC 5.0 PHY, set:
-  marvell,xenon-phy-type = "emmc 5.0 phy"
-
-  All those types of PHYs can support eMMC, SD and SDIO.
-  Please note that this property only presents the type of PHY.
-  It doesn't stand for the entire SDHC type or property.
-  For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
-  supports eMMC 5.1.
-
-- marvell,xenon-phy-znr:
-  Set PHY ZNR value.
-  Only available for eMMC PHY.
-  Valid range = [0:0x1F].
-  ZNR is set as 0xF by default if this property is not provided.
-
-- marvell,xenon-phy-zpr:
-  Set PHY ZPR value.
-  Only available for eMMC PHY.
-  Valid range = [0:0x1F].
-  ZPR is set as 0xF by default if this property is not provided.
-
-- marvell,xenon-phy-nr-success-tun:
-  Set the number of required consecutive successful sampling points
-  used to identify a valid sampling window, in tuning process.
-  Valid range = [1:7].
-  Set as 0x4 by default if this property is not provided.
-
-- marvell,xenon-phy-tun-step-divider:
-  Set the divider for calculating TUN_STEP.
-  Set as 64 by default if this property is not provided.
-
-- marvell,xenon-phy-slow-mode:
-  If this property is selected, transfers will bypass PHY.
-  Only available when bus frequency lower than 55MHz in SDR mode.
-  Disabled by default. Please only try this property if timing issues
-  always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
-  SD Default Speed and HS mode and eMMC legacy speed mode.
-
-- marvell,xenon-tun-count:
-  Xenon SDHC SoC usually doesn't provide re-tuning counter in
-  Capabilities Register 3 Bit[11:8].
-  This property provides the re-tuning counter.
-  If this property is not set, default re-tuning counter will
-  be set as 0x9 in driver.
-
-- marvell,pad-type:
-  Type of Armada 3700 SoC PHY PAD Voltage Controller register.
-  Only valid when "marvell,armada-3700-sdhci" is selected.
-  Two types: "sd" and "fixed-1-8v".
-  If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
-  switched to 1.8V when later in higher speed mode.
-  If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
-  Please follow the examples with compatible "marvell,armada-3700-sdhci"
-  in below.
-
-Example:
-- For eMMC:
-
-	sdhci@aa0000 {
-		compatible = "marvell,armada-ap806-sdhci";
-		reg = <0xaa0000 0x1000>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmc_clk>,<&axi_clk>;
-		clock-names = "core", "axi";
-		bus-width = <4>;
-		marvell,xenon-phy-slow-mode;
-		marvell,xenon-tun-count = <11>;
-		non-removable;
-		no-sd;
-		no-sdio;
-
-		/* Vmmc and Vqmmc are both fixed */
-	};
-
-- For SD/SDIO:
-
-	sdhci@ab0000 {
-		compatible = "marvell,armada-cp110-sdhci";
-		reg = <0xab0000 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
-		vqmmc-supply = <&sd_vqmmc_regulator>;
-		vmmc-supply = <&sd_vmmc_regulator>;
-		clocks = <&sdclk>, <&axi_clk>;
-		clock-names = "core", "axi";
-		bus-width = <4>;
-		marvell,xenon-tun-count = <9>;
-	};
-
-- For eMMC with compatible "marvell,armada-3700-sdhci":
-
-	sdhci@aa0000 {
-		compatible = "marvell,armada-3700-sdhci";
-		reg = <0xaa0000 0x1000>,
-		      <phy_addr 0x4>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmcclk>;
-		clock-names = "core";
-		bus-width = <8>;
-		mmc-ddr-1_8v;
-		mmc-hs400-1_8v;
-		non-removable;
-		no-sd;
-		no-sdio;
-
-		/* Vmmc and Vqmmc are both fixed */
-
-		marvell,pad-type = "fixed-1-8v";
-	};
-
-- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
-
-	sdhci@ab0000 {
-		compatible = "marvell,armada-3700-sdhci";
-		reg = <0xab0000 0x1000>,
-		      <phy_addr 0x4>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
-		vqmmc-supply = <&sd_regulator>;
-		/* Vmmc is fixed */
-		clocks = <&sdclk>;
-		clock-names = "core";
-		bus-width = <4>;
-
-		marvell,pad-type = "sd";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
new file mode 100644
index 000000000000..3ee758886558
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Xenon SDHCI Controller
+
+description: |
+  This file documents differences between the core MMC properties described by
+  mmc-controller.yaml and the properties used by the Xenon implementation.
+
+  Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+  Each SDHC is independent and owns independent resources, such as register
+  sets, clock and PHY.
+
+  Each SDHC should have an independent device tree node.
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-cp110-sdhci
+          - marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-ap807-sdhci
+          - const: marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-3700-sdhci
+          - const: marvell,sdhci-xenon
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      For "marvell,armada-3700-sdhci", two register areas.  The first one
+      for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD
+      Voltage Control register.  Please follow the examples with compatible
+      "marvell,armada-3700-sdhci" in below.
+      Please also check property marvell,pad-type in below.
+
+      For other compatible strings, one register area for Xenon IP.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: axi
+
+  interrupts:
+    maxItems: 1
+
+  marvell,xenon-sdhc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: |
+      Indicate the corresponding bit index of current SDHC in SDHC System
+      Operation Control Register Bit[7:0].  Set/clear the corresponding bit to
+      enable/disable current SDHC.
+
+  marvell,xenon-phy-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - "emmc 5.1 phy"
+      - "emmc 5.0 phy"
+    description: |
+      Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default
+      choice if this property is not provided.  To select eMMC 5.0 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.0 phy"
+
+      All those types of PHYs can support eMMC, SD and SDIO. Please note that
+      this property only presents the type of PHY.  It doesn't stand for the
+      entire SDHC type or property.  For example, "emmc 5.1 phy" doesn't mean
+      that this Xenon SDHC only supports eMMC 5.1.
+
+  marvell,xenon-phy-znr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZNR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-zpr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZPR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-nr-success-tun:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    default: 0x4
+    description: |
+      Set the number of required consecutive successful sampling points
+      used to identify a valid sampling window, in tuning process.
+
+  marvell,xenon-phy-tun-step-divider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+    description: |
+      Set the divider for calculating TUN_STEP.
+
+  marvell,xenon-phy-slow-mode:
+    type: boolean
+    description: |
+      If this property is selected, transfers will bypass PHY.
+      Only available when bus frequency lower than 55MHz in SDR mode.
+      Disabled by default. Please only try this property if timing issues
+      always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
+      SD Default Speed and HS mode and eMMC legacy speed mode.
+
+  marvell,xenon-tun-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x9
+    description: |
+      Xenon SDHC SoC usually doesn't provide re-tuning counter in
+      Capabilities Register 3 Bit[11:8].
+      This property provides the re-tuning counter.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-3700-sdhci
+
+    then:
+      properties:
+        reg:
+          items:
+            - description: Xenon IP registers
+            - description: Armada 3700 SoC PHY PAD Voltage Control register
+
+        marvell,pad-type:
+          $ref: /schemas/types.yaml#/definitions/string
+          enum:
+            - sd
+            - fixed-1-8v
+          description: |
+            Type of Armada 3700 SoC PHY PAD Voltage Controller register.
+            If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning
+            and is switched to 1.8V when later in higher speed mode.
+            If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for
+            eMMC.
+            Please follow the examples with compatible
+            "marvell,armada-3700-sdhci" in below.
+
+      required:
+        - marvell,pad-type
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-cp110-sdhci
+              - marvell,armada-ap807-sdhci
+              - marvell,armada-ap806-sdhci
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: core
+            - const: axi
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // For eMMC
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci";
+      reg = <0xaa0000 0x1000>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmc_clk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-phy-slow-mode;
+      marvell,xenon-tun-count = <11>;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+    };
+
+  - |
+    // For SD/SDIO
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-cp110-sdhci";
+      reg = <0xab0000 0x1000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_vqmmc_regulator>;
+      vmmc-supply = <&sd_vmmc_regulator>;
+      clocks = <&sdclk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-tun-count = <9>;
+    };
+
+  - |
+    // For eMMC with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xaa0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmcclk 0>;
+      clock-names = "core";
+      bus-width = <8>;
+      mmc-ddr-1_8v;
+      mmc-hs400-1_8v;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+
+      marvell,pad-type = "fixed-1-8v";
+    };
+
+  - |
+    // For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xab0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_regulator>;
+      /* Vmmc is fixed */
+      clocks = <&sdclk 0>;
+      clock-names = "core";
+      bus-width = <4>;
+
+      marvell,pad-type = "sd";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
index b17d454442b3..fd347126449a 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-card.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-card.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MMC Card / eMMC Generic Device Tree Bindings
+title: MMC Card / eMMC Generic
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 513f3c8758aa..802e3ca8be4d 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -88,11 +88,18 @@ properties:
     default: 1
 
   max-frequency:
-    description:
-      Maximum operating frequency of the bus.
+    description: |
+      Maximum operating frequency of the bus:
+        - for eMMC, the maximum supported frequency is 200MHz,
+        - for SD/SDIO cards the SDR104 mode has a max supported
+          frequency of 208MHz,
+        - some mmc host controllers do support a max frequency upto
+          384MHz.
+      So, lets keep the maximum supported value here.
+
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 400000
-    maximum: 200000000
+    maximum: 384000000
 
   disable-wp:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -298,7 +305,10 @@ properties:
 
   vqmmc-supply:
     description:
-      Supply for the bus IO line power
+      Supply for the bus IO line power, such as a level shifter.
+      If the level shifter is controlled by a GPIO line, this shall
+      be modeled as a "regulator-fixed" with a GPIO line for
+      switching the level shifter on/off.
 
   mmc-pwrseq:
     $ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
deleted file mode 100644
index 5e74db69f581..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-MMC/SD/SDIO slot directly connected to a SPI bus
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmc_spi driver.
-
-Required properties:
-- spi-max-frequency : maximum frequency for this device (Hz).
-
-Optional properties:
-- voltage-ranges : two cells are required, first cell specifies minimum
-  slot voltage (mV), second cell specifies maximum slot voltage (mV).
-  Several ranges could be specified. If not provided, 3.2v..3.4v is assumed.
-- gpios : may specify GPIOs in this order: Card-Detect GPIO,
-  Write-Protect GPIO. Note that this does not follow the
-  binding from mmc.txt, for historical reasons.
-
-Example:
-
-	mmc-slot@0 {
-		compatible = "fsl,mpc8323rdb-mmc-slot",
-			     "mmc-spi-slot";
-		reg = <0>;
-		gpios = <&qe_pio_d 14 1
-			 &qe_pio_d 15 0>;
-		voltage-ranges = <3300 3300>;
-		spi-max-frequency = <50000000>;
-		interrupts = <42>;
-		interrupt-parent = <&PIC>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
new file mode 100644
index 000000000000..c0662ce9946d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC/SD/SDIO slot directly connected to a SPI bus
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: "mmc-controller.yaml"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+description: |
+  The extra properties used by an mmc connected via SPI.
+
+properties:
+  compatible:
+    const: mmc-spi-slot
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Two cells are required, first cell specifies minimum slot voltage (mV),
+      second cell specifies maximum slot voltage (mV).
+    items:
+      - description: |
+          value for minimum slot voltage in mV
+        default: 3200
+      - description: |
+          value for maximum slot voltage in mV
+        default: 3400
+
+  gpios:
+    description: |
+      For historical reasons, this does not follow the generic mmc-controller
+      binding.
+    minItems: 1
+    items:
+      - description: Card-Detect GPIO
+      - description: Write-Protect GPIO
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mmc@0 {
+        compatible = "mmc-spi-slot";
+        reg = <0>;
+        gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>;
+        voltage-ranges = <3300 3300>;
+        spi-max-frequency = <50000000>;
+        interrupts = <42>;
+        interrupt-parent = <&PIC>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index faf89b0c918f..d8e1e2e9adf2 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -20,6 +20,7 @@ properties:
           - mediatek,mt2701-mmc
           - mediatek,mt2712-mmc
           - mediatek,mt6779-mmc
+          - mediatek,mt6795-mmc
           - mediatek,mt7620-mmc
           - mediatek,mt7622-mmc
           - mediatek,mt8135-mmc
@@ -30,14 +31,18 @@ properties:
           - const: mediatek,mt7623-mmc
           - const: mediatek,mt2701-mmc
       - items:
-          - const: mediatek,mt8192-mmc
-          - const: mediatek,mt8183-mmc
-      - items:
-          - const: mediatek,mt8195-mmc
+          - enum:
+              - mediatek,mt8186-mmc
+              - mediatek,mt8188-mmc
+              - mediatek,mt8192-mmc
+              - mediatek,mt8195-mmc
           - const: mediatek,mt8183-mmc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: base register (required).
+      - description: top base register (required for MT8183).
 
   clocks:
     description:
@@ -66,12 +71,27 @@ properties:
       - const: ahb_cg
 
   interrupts:
-    maxItems: 1
+    description:
+      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+      interrupt is required and be configured as wakeup source irq.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: msdc
+      - const: sdio_wakeup
 
   pinctrl-names:
+    description:
+      Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+      will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+      scenario.
+    minItems: 2
     items:
       - const: default
       - const: state_uhs
+      - const: state_eint
 
   pinctrl-0:
     description:
@@ -83,6 +103,11 @@ properties:
       should contain uhs mode pin ctrl.
     maxItems: 1
 
+  pinctrl-2:
+    description:
+      should switch dat1 pin to GPIO mode.
+    maxItems: 1
+
   assigned-clocks:
     description:
       PLL of the source clock.
@@ -165,6 +190,16 @@ required:
   - vmmc-supply
   - vqmmc-supply
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt8183-mmc
+then:
+  properties:
+    reg:
+      minItems: 2
+
 unevaluatedProperties: false
 
 examples:
@@ -192,4 +227,32 @@ examples:
         mediatek,hs400-cmd-resp-sel-rising;
     };
 
+    mmc3: mmc@11260000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11260000 0x1000>;
+        clock-names = "source", "hclk";
+        clocks = <&pericfg CLK_PERI_MSDC30_3>,
+                 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+        interrupt-names = "msdc", "sdio_wakeup";
+        interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+                     <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+        pinctrl-names = "default", "state_uhs", "state_eint";
+        pinctrl-0 = <&mmc2_pins_default>;
+        pinctrl-1 = <&mmc2_pins_uhs>;
+        pinctrl-2 = <&mmc2_pins_eint>;
+        bus-width = <4>;
+        max-frequency = <200000000>;
+        cap-sd-highspeed;
+        sd-uhs-sdr104;
+        keep-power-in-suspend;
+        wakeup-source;
+        cap-sdio-irq;
+        no-mmc;
+        no-sd;
+        non-removable;
+        vmmc-supply = <&sdio_fixed_3v3>;
+        vqmmc-supply = <&mt6397_vgp3_reg>;
+        mmc-pwrseq = <&wifi_pwrseq>;
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
index ce64b3498378..fe0270207622 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
@@ -197,25 +197,22 @@ allOf:
               - nvidia,tegra30-sdhci
               - nvidia,tegra114-sdhci
               - nvidia,tegra124-sdhci
+    then:
+      properties:
         clocks:
           items:
             - description: module clock
-          minItems: 1
-          maxItems: 1
     else:
       properties:
         clocks:
           items:
             - description: module clock
             - description: timeout clock
-          minItems: 2
-          maxItems: 2
+
         clock-names:
           items:
             - const: sdhci
             - const: tmclk
-          minItems: 2
-          maxItems: 2
       required:
         - clock-names
 
diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
deleted file mode 100644
index 10f0818a34c5..000000000000
--- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell orion-sdio controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the orion-sdio driver.
-
-- compatible: Should be "marvell,orion-sdio"
-- clocks: reference to the clock of the SDIO interface
-
-Example:
-
-	mvsdio@d00d4000 {
-		compatible = "marvell,orion-sdio";
-		reg = <0xd00d4000 0x200>;
-		interrupts = <54>;
-		clocks = <&gateclk 17>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 9ce6e06c19db..0424b06cb655 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -56,9 +56,15 @@ properties:
               - renesas,sdhi-r8a77980  # R-Car V3H
               - renesas,sdhi-r8a77990  # R-Car E3
               - renesas,sdhi-r8a77995  # R-Car D3
-              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r9a07g043 # RZ/G2UL
               - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
+              - renesas,sdhi-r9a07g054 # RZ/V2L
           - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
+      - items:
+          - enum:
+              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r8a779f0  # R-Car S4-8
+          - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
     maxItems: 1
@@ -83,6 +89,9 @@ properties:
         - tx
         - rx
 
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
@@ -107,7 +116,10 @@ allOf:
       properties:
         compatible:
           contains:
-            const: renesas,sdhi-r9a07g044
+            enum:
+              - renesas,sdhi-r9a07g043
+              - renesas,sdhi-r9a07g044
+              - renesas,sdhi-r9a07g054
     then:
       properties:
         clocks:
@@ -136,6 +148,7 @@ allOf:
               enum:
                 - renesas,rcar-gen2-sdhi
                 - renesas,rcar-gen3-sdhi
+                - renesas,rcar-gen4-sdhi
       then:
         properties:
           clocks:
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 54fb59820d2b..95f59a5e3576 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip designware mobile storage host controller device tree bindings
+title: Rockchip designware mobile storage host controller
 
 description:
   Rockchip uses the Synopsys designware mobile storage host controller
@@ -32,6 +32,7 @@ properties:
               - rockchip,px30-dw-mshc
               - rockchip,rk1808-dw-mshc
               - rockchip,rk3036-dw-mshc
+              - rockchip,rk3128-dw-mshc
               - rockchip,rk3228-dw-mshc
               - rockchip,rk3308-dw-mshc
               - rockchip,rk3328-dw-mshc
@@ -39,6 +40,7 @@ properties:
               - rockchip,rk3399-dw-mshc
               - rockchip,rk3568-dw-mshc
               - rockchip,rv1108-dw-mshc
+              - rockchip,rv1126-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
new file mode 100644
index 000000000000..fdaa18481aa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-dw-mshc
+      - samsung,exynos4412-dw-mshc
+      - samsung,exynos5250-dw-mshc
+      - samsung,exynos5420-dw-mshc
+      - samsung,exynos5420-dw-mshc-smu
+      - samsung,exynos7-dw-mshc
+      - samsung,exynos7-dw-mshc-smu
+      - axis,artpec8-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  samsung,dw-mshc-ciu-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      The divider value for the card interface unit (ciu) clock.
+
+  samsung,dw-mshc-ddr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CUI clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for double data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,dw-mshc-hs400-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description: |
+      The value of CIU TX and RX clock phase shift value for HS400 mode
+      operation.
+      Valid values for SDR and DDR CIU clock timing::
+        - valid value for tx phase shift and rx phase shift is 0 to 7.
+        - when CIU clock divider value is set to 3, all possible 8 phase shift
+          values can be used.
+        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+          phase shift clocks should be 0.
+      If missing, values from samsung,dw-mshc-ddr-timing property are used.
+
+  samsung,dw-mshc-sdr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CIU clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for single data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,read-strobe-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
+      line in Read path). If missing, default from hardware is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - samsung,dw-mshc-ddr-timing
+  - samsung,dw-mshc-sdr-timing
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-dw-mshc
+              - samsung,exynos5420-dw-mshc
+              - samsung,exynos7-dw-mshc
+              - samsung,exynos7-dw-mshc-smu
+              - axis,artpec8-dw-mshc
+    then:
+      required:
+        - samsung,dw-mshc-ciu-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12220000 {
+        compatible = "samsung,exynos5420-dw-mshc";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x12220000 0x1000>;
+        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+        clock-names = "biu", "ciu";
+        fifo-depth = <0x40>;
+        card-detect-delay = <200>;
+        samsung,dw-mshc-ciu-div = <3>;
+        samsung,dw-mshc-sdr-timing = <0 4>;
+        samsung,dw-mshc-ddr-timing = <0 2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        max-frequency = <200000000>;
+        vmmc-supply = <&ldo19_reg>;
+        vqmmc-supply = <&ldo13_reg>;
+        sd-uhs-sdr50;
+        sd-uhs-sdr104;
+        sd-uhs-ddr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
new file mode 100644
index 000000000000..5d873a60f650
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC SDHCI Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-sdhci
+      - samsung,exynos4210-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hsmmc
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-sdhci
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: hsmmc
+            - const: mmc_busclk.2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12510000 {
+        compatible = "samsung,exynos4210-sdhci";
+        reg = <0x12510000 0x100>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+        clock-names = "hsmmc", "mmc_busclk.2";
+        bus-width = <4>;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+        pinctrl-names = "default";
+        vmmc-supply = <&ldo21_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
deleted file mode 100644
index 42e0a9afa100..000000000000
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung's SDHCI Controller device tree bindings
-
-Samsung's SDHCI controller is used as a connectivity interface with external
-MMC, SD and eMMC storage mediums. This file documents differences between the
-core mmc properties described by mmc.txt and the properties used by the
-Samsung implementation of the SDHCI controller.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
-    controller.
-  - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
-    controller.
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Example:
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		bus-width = <4>;
-		cd-gpios = <&gpk2 2 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-	};
-
-	Note: This example shows both SoC specific and board specific properties
-	in a single device node. The properties can be actually be separated
-	into SoC specific node and board specific node.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
index 9fbf16b3bc8d..ea9121fb188d 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -21,6 +21,7 @@ properties:
       - const: ti,j721e-sdhci-4bit
       - const: ti,am64-sdhci-8bit
       - const: ti,am64-sdhci-4bit
+      - const: ti,am62-sdhci
       - items:
           - const: ti,j7200-sdhci-8bit
           - const: ti,j721e-sdhci-8bit
@@ -50,6 +51,9 @@ properties:
 
   sdhci-caps-mask: true
 
+  dma-coherent:
+    type: boolean
+
   # PHY output tap delays:
   # Used to delay the data valid window and align it to the sampling clock.
   # Binding needs to be provided for each supported speed mode otherwise the
@@ -185,6 +189,13 @@ properties:
     description: Clock Delay Buffer Select
     $ref: "/schemas/types.yaml#/definitions/uint32"
 
+  ti,fails-without-test-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, indicates that the CD line is not connected
+      and the controller is required to be forced into Test mode
+      to set the TESTCD bit.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
deleted file mode 100644
index ae9aab9abcd7..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Marvell sdhci-dove controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-- compatible: Should be "marvell,dove-sdhci".
-
-Example:
-
-sdio0: sdio@92000 {
-	compatible = "marvell,dove-sdhci";
-	reg = <0x92000 0x100>;
-	interrupts = <35>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
deleted file mode 100644
index 6a8cc261bf61..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ /dev/null
@@ -1,122 +0,0 @@
-* Qualcomm SDHCI controller (sdhci-msm)
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-msm driver.
-
-Required properties:
-- compatible: Should contain a SoC-specific string and a IP version string:
-	version strings:
-		"qcom,sdhci-msm-v4" for sdcc versions less than 5.0
-		"qcom,sdhci-msm-v5" for sdcc version 5.0
-		For SDCC version 5.0.0, MCI registers are removed from SDCC
-		interface and some registers are moved to HC. New compatible
-		string is added to support this change - "qcom,sdhci-msm-v5".
-	full compatible strings with SoC and version:
-		"qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
-		"qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
-		"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
-		"qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"
-	NOTE that some old device tree files may be floating around that only
-	have the string "qcom,sdhci-msm-v4" without the SoC compatible string
-	but doing that should be considered a deprecated practice.
-
-- reg: Base address and length of the register in the following order:
-	- Host controller register map (required)
-	- SD Core register map (required for controllers earlier than msm-v5)
-	- CQE register map (Optional, CQE support is present on SDHC instance meant
-	                    for eMMC and version v4.2 and above)
-	- Inline Crypto Engine register map (optional)
-- reg-names: When CQE register map is supplied, below reg-names are required
-	- "hc" for Host controller register map
-	- "core" for SD core register map
-	- "cqhci" for CQE register map
-	- "ice" for Inline Crypto Engine register map (optional)
-- interrupts: Should contain an interrupt-specifiers for the interrupts:
-	- Host controller interrupt (required)
-- pinctrl-names: Should contain only one value - "default".
-- pinctrl-0: Should specify pin control groups used for this controller.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
-	"core"	- SDC MMC clock (MCLK) (required)
-	"bus"	- SDCC bus voter clock (optional)
-	"xo"	- TCXO clock (optional)
-	"cal"	- reference clock for RCLK delay calibration (optional)
-	"sleep"	- sleep clock for RCLK delay calibration (optional)
-	"ice" - clock for Inline Crypto Engine (optional)
-
-- qcom,ddr-config: Certain chipsets and platforms require particular settings
-	for the DDR_CONFIG register. Use this field to specify the register
-	value as per the Hardware Programming Guide.
-
-- qcom,dll-config: Chipset and Platform specific value. Use this field to
-	specify the DLL_CONFIG register value as per Hardware Programming Guide.
-
-Optional Properties:
-* Following bus parameters are required for interconnect bandwidth scaling:
-- interconnects: Pairs of phandles and interconnect provider specifier
-		 to denote the edge source and destination ports of
-		 the interconnect path.
-
-- interconnect-names: For sdhc, we have two main paths.
-		1. Data path : sdhc to ddr
-		2. Config path : cpu to sdhc
-		For Data interconnect path the name supposed to be
-		is "sdhc-ddr" and for config interconnect path it is
-		"cpu-sdhc".
-		Please refer to Documentation/devicetree/bindings/
-		interconnect/ for more details.
-
-Example:
-
-	sdhc_1: sdhci@f9824900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-		interrupts = <0 123 0>;
-		bus-width = <8>;
-		non-removable;
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-
-		clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-		clock-names = "core", "iface";
-		interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
-				<&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
-		interconnect-names = "sdhc-ddr","cpu-sdhc";
-
-		qcom,dll-config = <0x000f642c>;
-		qcom,ddr-config = <0x80040868>;
-	};
-
-	sdhc_2: sdhci@f98a4900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-		interrupts = <0 125 0>;
-		bus-width = <4>;
-		cd-gpios = <&msmgpio 62 0x1>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
-
-		clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		qcom,dll-config = <0x0007642c>;
-		qcom,ddr-config = <0x80040868>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
new file mode 100644
index 000000000000..a96f143479c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm SDHCI controller (sdhci-msm)
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  Secure Digital Host Controller Interface (SDHCI) present on
+  Qualcomm SOCs supports SD/MMC/SDIO devices.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdhci-msm-v4
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-sdhci
+              - qcom,msm8226-sdhci
+              - qcom,msm8953-sdhci
+              - qcom,msm8974-sdhci
+              - qcom,msm8916-sdhci
+              - qcom,msm8992-sdhci
+              - qcom,msm8994-sdhci
+              - qcom,msm8996-sdhci
+              - qcom,msm8998-sdhci
+          - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
+      - items:
+          - enum:
+              - qcom,qcs404-sdhci
+              - qcom,sc7180-sdhci
+              - qcom,sc7280-sdhci
+              - qcom,sdm630-sdhci
+              - qcom,sdm670-sdhci
+              - qcom,sdm845-sdhci
+              - qcom,sdx55-sdhci
+              - qcom,sdx65-sdhci
+              - qcom,sm6115-sdhci
+              - qcom,sm6125-sdhci
+              - qcom,sm6350-sdhci
+              - qcom,sm8150-sdhci
+              - qcom,sm8250-sdhci
+              - qcom,sm8450-sdhci
+          - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
+      - description: SDC MMC clock, MCLK
+      - description: TCXO clock
+      - description: clock for Inline Crypto Engine
+      - description: SDCC bus voter clock
+      - description: reference clock for RCLK delay calibration
+      - description: sleep clock for RCLK delay calibration
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: core
+      - const: xo
+      - const: ice
+      - const: bus
+      - const: cal
+      - const: sleep
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hc_irq
+      - const: pwr_irq
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description:
+      Should specify pin control groups used for this controller.
+
+  pinctrl-1:
+    description:
+      Should specify sleep pin control groups used for this controller.
+
+  resets:
+    maxItems: 1
+
+  qcom,ddr-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DDR_CONFIG reg.
+
+  qcom,dll-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DLL_CONFIG reg.
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description: |
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    items:
+      - description: data path, sdhc to ddr
+      - description: config path, cpu to sdhc
+
+  interconnect-names:
+    items:
+      - const: sdhc-ddr
+      - const: cpu-sdhc
+
+  power-domains:
+    description: A phandle to sdhci power domain node
+    maxItems: 1
+
+  mmc-ddr-1_8v: true
+
+  mmc-hs200-1_8v: true
+
+  mmc-hs400-1_8v: true
+
+  bus-width: true
+
+  max-frequency: true
+
+  operating-points-v2: true
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdhci-msm-v4
+    then:
+      properties:
+        reg:
+          minItems: 2
+          items:
+            - description: Host controller register map
+            - description: SD Core register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 2
+          items:
+            - const: hc
+            - const: core
+            - const: cqhci
+            - const: ice
+    else:
+      properties:
+        reg:
+          minItems: 1
+          items:
+            - description: Host controller register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 1
+          items:
+            - const: hc
+            - const: cqhci
+            - const: ice
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    sdhc_2: mmc@8804000 {
+      compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+      reg = <0 0x08804000 0 0x1000>;
+
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hc_irq", "pwr_irq";
+
+      clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+               <&gcc GCC_SDCC2_APPS_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "core", "xo";
+      iommus = <&apps_smmu 0x4a0 0x0>;
+      qcom,dll-config = <0x0007642c>;
+      qcom,ddr-config = <0x80040868>;
+      power-domains = <&rpmhpd SM8250_CX>;
+
+      operating-points-v2 = <&sdhc2_opp_table>;
+
+      sdhc2_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        opp-19200000 {
+          opp-hz = /bits/ 64 <19200000>;
+          required-opps = <&rpmhpd_opp_min_svs>;
+        };
+
+        opp-50000000 {
+          opp-hz = /bits/ 64 <50000000>;
+          required-opps = <&rpmhpd_opp_low_svs>;
+        };
+
+        opp-100000000 {
+          opp-hz = /bits/ 64 <100000000>;
+          required-opps = <&rpmhpd_opp_svs>;
+        };
+
+        opp-202000000 {
+          opp-hz = /bits/ 64 <202000000>;
+          required-opps = <&rpmhpd_opp_svs_l1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index f300ced4cdf3..71f8e726d641 100644
--- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - rockchip,rk3568-dwcmshc
+      - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
 
   reg:
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index c033ac3f147d..4741864da48e 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/allwinner,sun4i-a10-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 NAND Controller Device Tree Bindings
+title: Allwinner A10 NAND Controller
 
 allOf:
   - $ref: "nand-controller.yaml"
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5794ab1147c1..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gxl-nfc"
-  - "amlogic,meson-axg-nfc"
-- clocks     :
-	A list of phandle + clock-specifier pairs for the clocks listed
-	in clock-names.
-
-- clock-names: Should contain the following:
-	"core" - NFC module gate clock
-	"device" - device clock from eMMC sub clock controller
-	"rx" - rx clock phase
-	"tx" - tx clock phase
-
-- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
-				controller port C
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
-	sd_emmc_c_clkc: mmc@7000 {
-		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
-		reg = <0x0 0x7000 0x0 0x800>;
-	};
-
-	nand-controller@7800 {
-		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
-		clocks = <&clkc CLKID_SD_EMMC_C>,
-			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
-		clock-names = "core", "device", "rx", "tx";
-		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins>;
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nand-on-flash-bbt;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..28fb9a7dd70f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-nfc
+      - amlogic,meson-axg-nfc
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: nfc
+      - const: emmc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: device
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [8, 16, 24, 30, 40, 50, 60]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+            meson-axg-nfc 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand-controller@ffe07800 {
+      compatible = "amlogic,meson-axg-nfc";
+      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+      reg-names = "nfc", "emmc";
+      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
+      clock-names = "core", "device";
+
+      pinctrl-0 = <&nand_pins>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
index b32876933269..f013fb976d95 100644
--- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/arasan,nand-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Arasan NAND Flash Controller with ONFI 3.1 support device tree bindings
+title: Arasan NAND Flash Controller with ONFI 3.1 support
 
 allOf:
   - $ref: "nand-controller.yaml"
diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
index 5f126bb9b202..023f3ef0fa13 100644
--- a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
+++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: PL353 NAND Controller device tree bindings
+title: PL353 NAND Controller
 
 allOf:
   - $ref: "nand-controller.yaml"
diff --git a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt
deleted file mode 100644
index 49f6528ef547..000000000000
--- a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Aspeed Firmware Memory controller
-* Aspeed SPI Flash Memory Controller
-
-The Firmware Memory Controller in the Aspeed AST2500 SoC supports
-three chip selects, two of which are always of SPI type and the third
-can be SPI or NOR type flash. These bindings only describe SPI.
-
-The two SPI flash memory controllers in the AST2500 each support two
-chip selects.
-
-Required properties:
-  - compatible : Should be one of
-	"aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller
-	"aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller
-	"aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller
-	"aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers
-
-  - reg : the first contains the control register location and length,
-          the second contains the memory window mapping address and length
-  - #address-cells : must be 1 corresponding to chip select child binding
-  - #size-cells : must be 0 corresponding to chip select child binding
-
-Optional properties:
-  - interrupts : Should contain the interrupt for the dma device if an
-    FMC
-
-The child nodes are the SPI flash modules which must have a compatible
-property as specified in bindings/mtd/jedec,spi-nor.txt
-
-Optionally, the child node can contain properties for SPI mode (may be
-ignored):
-  - spi-max-frequency - max frequency of spi bus
-
-
-Example:
-fmc: fmc@1e620000 {
-	compatible = "aspeed,ast2500-fmc";
-	reg = < 0x1e620000 0x94
-		0x20000000 0x02000000 >;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <19>;
-	flash@0 {
-		reg = < 0 >;
-		compatible = "jedec,spi-nor";
-		/* spi-max-frequency = <>; */
-		/* m25p,fast-read; */
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt
deleted file mode 100644
index ae16f9ea8606..000000000000
--- a/Documentation/devicetree/bindings/mtd/common.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to mtd.yaml.
diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
deleted file mode 100644
index efa5b2aba829..000000000000
--- a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Flash device on Cortina Systems Gemini SoC
-
-This flash is regular CFI compatible (Intel or AMD extended) flash chips with
-some special bits that can be controlled by the machine's system controller.
-
-Required properties:
-- compatible : must be "cortina,gemini-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- syscon : must be a phandle to the system controller
-- bank-width : width in bytes of flash interface, should be <2>
-
-For the rest of the properties, see mtd-physmap.yaml.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@30000000 {
-	compatible = "cortina,gemini-flash", "cfi-flash";
-	reg = <0x30000000 0x01000000>;
-	syscon = <&syscon>;
-	bank-width = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt
deleted file mode 100644
index 59ddc61c1076..000000000000
--- a/Documentation/devicetree/bindings/mtd/elm.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Error location module
-
-Required properties:
-- compatible: Must be "ti,am3352-elm"
-- reg: physical base address and size of the registers map.
-- interrupts: Interrupt number for the elm.
-
-Optional properties:
-- ti,hwmods: Name of the hwmod associated to the elm
-
-Example:
-elm: elm@0 {
-	compatible = "ti,am3352-elm";
-	reg = <0x48080000 0x2000>;
-	interrupts = <4>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 9d764e654e1d..849aeae319a9 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -147,8 +147,6 @@ allOf:
             - description: SoC gpmi io clock
             - description: SoC gpmi bch apb clock
         clock-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: gpmi_io
             - const: gpmi_bch_apb
diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
index 74981520d6dd..a99de13c7ccd 100644
--- a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
@@ -17,7 +17,7 @@ spi-nor-controller@10000000 {
 	reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
 	reg-names = "control", "memory";
 	clocks = <&clock HI3519_FMC_CLK>;
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 	};
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
index 9de8ef6e59ca..8c272c842bfd 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: nand-controller.yaml#
+  - $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
index 30e0c66ab0eb..741c66ee06c3 100644
--- a/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mtd/intel,lgm-nand.yaml#
+$id: http://devicetree.org/schemas/mtd/intel,lgm-ebunand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel LGM SoC NAND Controller Device Tree Bindings
+title: Intel LGM SoC NAND Controller
 
 allOf:
   - $ref: "nand-controller.yaml"
@@ -14,7 +14,7 @@ maintainers:
 
 properties:
   compatible:
-    const: intel,lgm-nand
+    const: intel,lgm-ebunand
 
   reg:
     maxItems: 6
@@ -51,7 +51,7 @@ patternProperties:
     properties:
       reg:
         minimum: 0
-        maximum: 7
+        maximum: 1
 
       nand-ecc-mode: true
 
@@ -75,7 +75,7 @@ additionalProperties: false
 examples:
   - |
     nand-controller@e0f00000 {
-      compatible = "intel,lgm-nand";
+      compatible = "intel,lgm-ebunand";
       reg = <0xe0f00000 0x100>,
             <0xe1000000 0x300>,
             <0xe1400000 0x8000>,
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 39421f7233e4..7149784a36ac 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -47,11 +47,8 @@ properties:
       identified by the JEDEC READ ID opcode (0x9F).
 
   reg:
-    maxItems: 1
-
-  spi-max-frequency: true
-  spi-rx-bus-width: true
-  spi-tx-bus-width: true
+    minItems: 1
+    maxItems: 2
 
   m25p,fast-read:
     type: boolean
@@ -73,8 +70,6 @@ properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
-  label: true
-
   partitions:
     type: object
 
@@ -98,8 +93,6 @@ examples:
         #size-cells = <0>;
 
         flash@0 {
-            #address-cells = <1>;
-            #size-cells = <1>;
             compatible = "spansion,m25p80", "jedec,spi-nor";
             reg = <0>;
             spi-max-frequency = <40000000>;
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
index 2cdf6bf3dc4a..8cc2a7ceb5fb 100644
--- a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
@@ -22,13 +22,14 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
index f827984936f6..82eb4e0f453b 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -44,7 +44,9 @@ properties:
               - numonyx,js28f128
               - sst,sst39vf320
               - xlnx,xps-mch-emc-2.00.a
-          - const: cfi-flash
+          - enum:
+              - cfi-flash
+              - jedec-flash
       - items:
           - enum:
               - cypress,cy7c1019dv33-10zsxi
@@ -127,6 +129,20 @@ required:
   - compatible
   - reg
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: cortina,gemini-flash
+then:
+  properties:
+    syscon:
+      $ref: /schemas/types.yaml#/definitions/phandle
+      description:
+        Phandle to the syscon controller
+  required:
+    - syscon
+
 # FIXME: A parent bus may define timing properties
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
index 376b679cfc70..3498e485679b 100644
--- a/Documentation/devicetree/bindings/mtd/mtd.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/mtd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MTD (Memory Technology Device) Device Tree Bindings
+title: MTD (Memory Technology Device)
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
index 73b86f2226c7..66da1b476ab7 100644
--- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
@@ -37,6 +37,4 @@ examples:
         compatible = "fsl,imx27-nand";
         reg = <0xd8000000 0x1000>;
         interrupts = <29>;
-        nand-bus-width = <8>;
-        nand-ecc-mode = "hw";
     };
diff --git a/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
new file mode 100644
index 000000000000..f92e7234deab
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mxicy,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix NAND ECC engine
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: mxicy,nand-ecc-engine-rev3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    /* External configuration */
+    spi_controller0: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&ecc_engine0>;
+        };
+    };
+
+    ecc_engine0: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
+
+  - |
+    /* Pipelined configuration */
+    spi_controller1: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand-ecc-engine = <&ecc_engine1>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&spi_controller1>;
+        };
+    };
+
+    ecc_engine1: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/nand-chip.yaml b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
new file mode 100644
index 000000000000..97ac3a3fbb52
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip and NAND Controller Generic Binding
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  This file covers the generic description of a NAND chip. It implies that the
+  bus interface should not be taken into account: both raw NAND devices and
+  SPI-NAND devices are concerned by this description.
+
+properties:
+  reg:
+    description:
+      Contains the chip-select IDs.
+
+  nand-ecc-engine:
+    description: |
+      A phandle on the hardware ECC engine if any. There are
+      basically three possibilities:
+      1/ The ECC engine is part of the NAND controller, in this
+      case the phandle should reference the parent node.
+      2/ The ECC engine is part of the NAND part (on-die), in this
+      case the phandle should reference the node itself.
+      3/ The ECC engine is external, in this case the phandle should
+      reference the specific ECC engine node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-use-soft-ecc-engine:
+    description: Use a software ECC engine.
+    type: boolean
+
+  nand-no-ecc-engine:
+    description: Do not use any ECC correction.
+    type: boolean
+
+  nand-ecc-algo:
+    description:
+      Desired ECC algorithm.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hamming, bch, rs]
+
+  nand-ecc-strength:
+    description:
+      Maximum number of bits that can be corrected per ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  nand-ecc-step-size:
+    description:
+      Number of data bytes covered by a single ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  secure-regions:
+    description:
+      Regions in the NAND chip which are protected using a secure element
+      like Trustzone. This property contains the start address and size of
+      the secure regions present.
+    $ref: /schemas/types.yaml#/definitions/uint64-matrix
+
+required:
+  - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index bd217e6f5018..359a015d4e5a 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -39,8 +39,6 @@ properties:
   ranges: true
 
   cs-gpios:
-    minItems: 1
-    maxItems: 8
     description:
       Array of chip-select available to the controller. The first
       entries are a 1:1 mapping of the available chip-select on the
@@ -48,51 +46,27 @@ properties:
       chip-select as needed may follow and should be phandles of GPIO
       lines. 'reg' entries of the NAND chip subnodes become indexes of
       this array when this property is present.
+    minItems: 1
+    maxItems: 8
 
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
+    $ref: "nand-chip.yaml#"
+
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
-
-      nand-ecc-engine:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/phandle
-        description: |
-          A phandle on the hardware ECC engine if any. There are
-          basically three possibilities:
-          1/ The ECC engine is part of the NAND controller, in this
-          case the phandle should reference the parent node.
-          2/ The ECC engine is part of the NAND part (on-die), in this
-          case the phandle should reference the node itself.
-          3/ The ECC engine is external, in this case the phandle should
-          reference the specific ECC engine node.
-
-      nand-use-soft-ecc-engine:
-        type: boolean
-        description: Use a software ECC engine.
-
-      nand-no-ecc-engine:
-        type: boolean
-        description: Do not use any ECC correction.
+          Contains the chip-select IDs.
 
       nand-ecc-placement:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ oob, interleaved ]
         description:
           Location of the ECC bytes. This location is unknown by default
           but can be explicitly set to "oob", if all ECC bytes are
           known to be stored in the OOB area, or "interleaved" if ECC
           bytes will be interleaved with regular data in the main area.
-
-      nand-ecc-algo:
-        description:
-          Desired ECC algorithm.
         $ref: /schemas/types.yaml#/definitions/string
-        enum: [hamming, bch, rs]
+        enum: [ oob, interleaved ]
 
       nand-bus-width:
         description:
@@ -102,7 +76,6 @@ patternProperties:
         default: 8
 
       nand-on-flash-bbt:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           With this property, the OS will search the device for a Bad
           Block Table (BBT). If not found, it will create one, reserve
@@ -111,21 +84,9 @@ patternProperties:
           few pages of all the blocks will be scanned at boot time to
           find Bad Block Markers (BBM). These markers will help to
           build a volatile BBT in RAM.
-
-      nand-ecc-strength:
-        description:
-          Maximum number of bits that can be corrected per ECC step.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 1
-
-      nand-ecc-step-size:
-        description:
-          Number of data bytes covered by a single ECC step.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 1
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-ecc-maximize:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           Whether or not the ECC strength should be maximized. The
           maximum ECC strength is both controller and chip
@@ -134,18 +95,19 @@ patternProperties:
           constraint into account. This is particularly useful when
           only the in-band area is used by the upper layers, and you
           want to make your NAND as reliable as possible.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-is-boot-medium:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           Whether or not the NAND chip is a boot medium. Drivers might
           use this information to select ECC algorithms supported by
           the boot ROM or similar restrictions.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-rb:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         description:
           Contains the native Ready/Busy IDs.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
 
       rb-gpios:
         description:
@@ -154,12 +116,12 @@ patternProperties:
           Ready/Busy pins. Active state refers to the NAND ready state and
           should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
 
-      secure-regions:
-        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+      wp-gpios:
         description:
-          Regions in the NAND chip which are protected using a secure element
-          like Trustzone. This property contains the start address and size of
-          the secure regions present.
+          Contains one GPIO descriptor for the Write Protect pin.
+          Active state refers to the NAND Write Protect state and should be
+          set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+        maxItems: 1
 
     required:
       - reg
@@ -181,10 +143,7 @@ examples:
 
       nand@0 {
         reg = <0>; /* Native CS */
-        nand-use-soft-ecc-engine;
-        nand-ecc-algo = "bch";
-
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
 
       nand@1 {
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
deleted file mode 100644
index d5c5616f6db5..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-ARM AFS - ARM Firmware Suite Partitions
-=======================================
-
-The ARM Firmware Suite is a flash partitioning system found on the
-ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
-Versatile PB, the RealView family, Versatile Express and Juno.
-
-Required properties:
-- compatible : (required) must be "arm,arm-firmware-suite"
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "arm,arm-firmware-suite";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
new file mode 100644
index 000000000000..76c88027b6d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/arm,arm-firmware-suite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Firmware Suite (AFS) Partitions
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The ARM Firmware Suite is a flash partitioning system found on the
+  ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
+  Versatile PB, the RealView family, Versatile Express and Juno.
+
+properties:
+  compatible:
+    const: arm,arm-firmware-suite
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "arm,arm-firmware-suite";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
deleted file mode 100644
index 1d61a029395e..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Broadcom BCM47xx Partitions
-===========================
-
-Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
-home routers. Their BCM947xx boards using CFE bootloader have several partitions
-without any on-flash partition table. On some devices their sizes and/or
-meanings can also vary so fixed partitioning can't be used.
-
-Discovering partitions on these devices is possible thanks to having a special
-header and/or magic signature at the beginning of each of them. They are also
-block aligned which is important for determinig a size.
-
-Most of partitions use ASCII text based magic for determining a type. More
-complex partitions (like TRX with its HDR0 magic) may include extra header
-containing some details, including a length.
-
-A list of supported partitions includes:
-1) Bootloader with Broadcom's CFE (Common Firmware Environment)
-2) NVRAM with configuration/calibration data
-3) Device manufacturer's data with some default values (e.g. SSIDs)
-4) TRX firmware container which can hold up to 4 subpartitions
-5) Backup TRX firmware used after failed upgrade
-
-As mentioned earlier, role of some partitions may depend on extra configuration.
-For example both: main firmware and backup firmware use the same TRX format with
-the same header. To distinguish currently used firmware a CFE's environment
-variable "bootpartition" is used.
-
-
-Devices using Broadcom partitions described above should should have flash node
-with a subnode named "partitions" using following properties:
-
-Required properties:
-- compatible : (required) must be "brcm,bcm947xx-cfe-partitions"
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "brcm,bcm947xx-cfe-partitions";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
new file mode 100644
index 000000000000..3484e06d6bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM47xx Partitions
+
+description: |
+  Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
+  home routers. Their BCM947xx boards using CFE bootloader have several
+  partitions without any on-flash partition table. On some devices their sizes
+  and/or meanings can also vary so fixed partitioning can't be used.
+
+  Discovering partitions on these devices is possible thanks to having a special
+  header and/or magic signature at the beginning of each of them. They are also
+  block aligned which is important for determinig a size.
+
+  Most of partitions use ASCII text based magic for determining a type. More
+  complex partitions (like TRX with its HDR0 magic) may include extra header
+  containing some details, including a length.
+
+  A list of supported partitions includes:
+  1) Bootloader with Broadcom's CFE (Common Firmware Environment)
+  2) NVRAM with configuration/calibration data
+  3) Device manufacturer's data with some default values (e.g. SSIDs)
+  4) TRX firmware container which can hold up to 4 subpartitions
+  5) Backup TRX firmware used after failed upgrade
+
+  As mentioned earlier, role of some partitions may depend on extra
+  configuration. For example both: main firmware and backup firmware use the
+  same TRX format with the same header. To distinguish currently used firmware a
+  CFE's environment variable "bootpartition" is used.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm947xx-cfe-partitions
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "brcm,bcm947xx-cfe-partitions";
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index ea4cace6a955..ad3ccd250802 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -19,7 +19,11 @@ maintainers:
 
 properties:
   compatible:
-    const: fixed-partitions
+    oneOf:
+      - const: fixed-partitions
+      - items:
+          - const: sercomm,sc-partitions
+          - const: fixed-partitions
 
   "#address-cells": true
 
@@ -27,7 +31,24 @@ properties:
 
 patternProperties:
   "@[0-9a-f]+$":
-    $ref: "partition.yaml#"
+    allOf:
+      - $ref: "partition.yaml#"
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: sercomm,sc-partitions
+        then:
+          properties:
+            sercomm,scpart-id:
+              description: Partition id in Sercomm partition map. Mtd
+                parser uses this id to find a record in the partition map
+                containing offset and size of the current partition. The
+                values from partition map overrides partition offset and
+                size defined in reg property of the dts. Frequently these
+                values are the same, but may differ if device has bad
+                eraseblocks on a flash.
+              $ref: /schemas/types.yaml#/definitions/uint32
 
 required:
   - "#address-cells"
@@ -52,6 +73,7 @@ examples:
             reg = <0x0100000 0x200000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";
@@ -64,6 +86,7 @@ examples:
             reg = <0x00000000 0x1 0x00000000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";
@@ -82,6 +105,7 @@ examples:
             reg = <0x2 0x00000000 0x1 0x00000000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";
@@ -119,3 +143,30 @@ examples:
             };
         };
     };
+
+  - |
+    partitions {
+        compatible = "sercomm,sc-partitions", "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0 0x100000>;
+            sercomm,scpart-id = <0>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "dynamic partition map";
+            reg = <0x100000 0x100000>;
+            sercomm,scpart-id = <1>;
+        };
+
+        partition@200000 {
+            label = "Factory";
+            reg = <0x200000 0x100000>;
+            sercomm,scpart-id = <2>;
+            read-only;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index e1ac08064425..f1a02d840b12 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -11,6 +11,17 @@ description: |
   relative offset and size specified. Depending on partition function extra
   properties can be used.
 
+  A partition may be dynamically allocated by a specific parser at runtime.
+  In this specific case, a specific suffix is required to the node name.
+  Everything after 'partition-' will be used as the partition name to compare
+  with the one dynamically allocated by the specific parser.
+  If the partition contains invalid char a label can be provided that will
+  be used instead of the node name to make the comparison.
+  This is used to assign an OF node to the dynamiccally allocated partition
+  so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
+  The OF node will be assigned only if the partition label declared match the
+  one assigned by the parser at runtime.
+
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
@@ -41,7 +52,12 @@ properties:
       immune to paired-pages corruptions
     type: boolean
 
-required:
-  - reg
+if:
+  not:
+    required: [ reg ]
+then:
+  properties:
+    $nodename:
+      pattern: '^partition-.*$'
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
index cf3f8c1e035d..dc07909af023 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
@@ -19,6 +19,10 @@ properties:
   compatible:
     const: qcom,smem-part
 
+patternProperties:
+  "^partition-[0-9a-z]+$":
+    $ref: partition.yaml#
+
 required:
   - compatible
 
@@ -31,3 +35,26 @@ examples:
             compatible = "qcom,smem-part";
         };
     };
+
+  - |
+    /* Example declaring dynamic partition */
+    flash {
+      partitions {
+        compatible = "qcom,smem-part";
+
+        partition-art {
+          compatible = "nvmem-cells";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          label = "0:art";
+
+          macaddr_art_0: macaddr@0 {
+            reg = <0x0 0x6>;
+          };
+
+          macaddr_art_6: macaddr@6 {
+            reg = <0x6 0x6>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
new file mode 100644
index 000000000000..8a88e7d16524
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/u-boot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot bootloader partition
+
+description: |
+  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  located on some kind of flash device.
+
+  Device configuration is stored as a set of environment variables that are
+  located in a (usually standalone) block of data.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,u-boot
+        description: |
+          Broadcom stores environment variables inside a U-Boot partition. They
+          can be identified by a custom header with magic value.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "brcm,u-boot";
+            reg = <0x0 0x100000>;
+            label = "u-boot";
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "firmware";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..482a2c068740 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -102,6 +102,31 @@ allOf:
             - const: rx
             - const: cmd
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq806x-nand
+
+    then:
+      properties:
+        qcom,boot-partitions:
+          $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          items:
+            items:
+              - description: offset
+              - description: size
+          description:
+            Boot partition use a different layout where the 4 bytes of spare
+            data are not protected by ECC. Use this to declare these special
+            partitions by defining first the offset and then the size.
+
+            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+            and should be declared in ascending order.
+
+            Refer to the ipq8064 example on how to use this special binding.
+
 required:
   - compatible
   - reg
@@ -135,6 +160,8 @@ examples:
         nand-ecc-strength = <4>;
         nand-bus-width = <8>;
 
+        qcom,boot-partitions = <0x0 0x58a0000>;
+
         partitions {
           compatible = "fixed-partitions";
           #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
index 2870d36361c4..f0dc78bb0515 100644
--- a/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/renesas-nandc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller device tree bindings
+title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
@@ -36,11 +36,15 @@ properties:
       - const: hclk
       - const: eclk
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - clocks
   - clock-names
+  - power-domains
   - interrupts
 
 unevaluatedProperties: false
@@ -56,6 +60,7 @@ examples:
         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
         clock-names = "hclk", "eclk";
+        power-domains = <&sysctrl>;
         #address-cells = <1>;
         #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 0922536b1811..d681a4676f06 100644
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -96,8 +96,7 @@ patternProperties:
 
       rockchip,boot-ecc-strength:
         enum: [16, 24, 40, 60, 70]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         description: |
           If specified it indicates that a different BCH/ECC setting is
           supported by the boot ROM.
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
deleted file mode 100644
index 8b51f3b6d55c..000000000000
--- a/Documentation/devicetree/bindings/mtd/spi-nand.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-SPI NAND flash
-
-Required properties:
-- compatible: should be "spi-nand"
-- reg: should encode the chip-select line used to access the NAND chip
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
new file mode 100644
index 000000000000..4d095e613204
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "nand-chip.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: spi-nand
+
+  reg:
+    description: Encode the chip-select line on the SPI bus
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/ti,elm.yaml b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
new file mode 100644
index 000000000000..87128c004596
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,elm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Error Location Module (ELM).
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  ELM module is used together with GPMC and NAND Flash to detect
+  errors and the location of the error based on BCH algorithms
+  so they can be corrected if possible.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-elm
+      - ti,am64-elm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Functional clock.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with ELM. This is for legacy
+      platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-elm
+    then:
+      required:
+        - clocks
+        - clock-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    elm: ecc@0 {
+        compatible = "ti,am3352-elm";
+        reg = <0x0 0x2000>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
index 0a7c8d64981a..ee4de9fbaf4d 100644
--- a/Documentation/devicetree/bindings/mux/gpio-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -26,7 +26,10 @@ properties:
       List of gpios used to control the multiplexer, least significant bit first.
 
   '#mux-control-cells':
-    const: 0
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
 
   idle-state:
     default: -1
@@ -34,7 +37,11 @@ properties:
 required:
   - compatible
   - mux-gpios
-  - "#mux-control-cells"
+anyOf:
+  - required:
+      - "#mux-control-cells"
+  - required:
+      - "#mux-state-cells"
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
index 7af93298ab5c..d3d854967359 100644
--- a/Documentation/devicetree/bindings/mux/mux-consumer.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -25,6 +25,17 @@ description: |
   strings to label each of the mux controllers listed in the "mux-controls"
   property.
 
+  If it is required to provide the state that the mux controller needs to
+  be set to, the property "mux-states" must be used. An optional property
+  "mux-state-names" can be used to provide a list of strings, to label
+  each of the multiplixer states listed in the "mux-states" property.
+
+  Properties "mux-controls" and "mux-states" can be used depending on how
+  the consumers want to control the mux controller. If the consumer needs
+  needs to set multiple states in a mux controller, then property
+  "mux-controls" can be used. If the consumer needs to set the mux
+  controller to a given state then property "mux-states" can be used.
+
   mux-ctrl-specifier typically encodes the chip-relative mux controller number.
   If the mux controller chip only provides a single mux controller, the
   mux-ctrl-specifier can typically be left out.
@@ -35,12 +46,22 @@ properties:
   mux-controls:
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  mux-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
   mux-control-names:
     description:
       Devices that use more than a single mux controller can use the
       "mux-control-names" property to map the name of the requested mux
       controller to an index into the list given by the "mux-controls" property.
 
+  mux-state-names:
+    description:
+      Devices that use more than a single multiplexer state can use the
+      "mux-state-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-states"
+      property.
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
index 736a84c3b6a5..c855fbad3884 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -25,7 +25,9 @@ description: |
   --------------------
 
   Mux controller nodes must specify the number of cells used for the
-  specifier using the '#mux-control-cells' property.
+  specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+  The value of '#mux-state-cells' will always be one greater than the value
+  of '#mux-control-cells'.
 
   Optionally, mux controller nodes can also specify the state the mux should
   have when it is idle. The idle-state property is used for this. If the
@@ -67,6 +69,8 @@ select:
           pattern: '^mux-controller'
     - required:
         - '#mux-control-cells'
+    - required:
+        - '#mux-state-cells'
 
 properties:
   $nodename:
@@ -75,6 +79,9 @@ properties:
   '#mux-control-cells':
     enum: [ 0, 1 ]
 
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
   idle-state:
     $ref: /schemas/types.yaml#/definitions/int32
     minimum: -2
@@ -179,4 +186,21 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux1: mux-controller {
+        compatible = "gpio-mux";
+        #mux-state-cells = <1>;
+        mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    transceiver4: can-phy4 {
+        compatible = "ti,tcan1042";
+        #phy-cells = <0>;
+        max-bitrate = <5000000>;
+        standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+        mux-states = <&mux1 1>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
index 60d5746eb39d..dfd9ea582bb7 100644
--- a/Documentation/devicetree/bindings/mux/reg-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
@@ -25,8 +25,12 @@ properties:
     const: 1
 
   mux-reg-masks:
-    description: an array of register offset and pre-shifted bitfield mask
-      pairs, each describing a single mux control.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: register offset
+        - description: pre-shifted bitfield mask
+    description: Each entry pair describes a single mux control.
 
   idle-states: true
 
@@ -96,7 +100,6 @@ examples:
 
     #include <dt-bindings/mux/mux.h>
     syscon@1000 {
-        compatible = "fsl,imx7d-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
         reg = <0x1000 0x100>;
 
         mux2: mux-controller {
diff --git a/Documentation/devicetree/bindings/nds32/andestech-boards b/Documentation/devicetree/bindings/nds32/andestech-boards
deleted file mode 100644
index f5d75693e3c7..000000000000
--- a/Documentation/devicetree/bindings/nds32/andestech-boards
+++ /dev/null
@@ -1,40 +0,0 @@
-Andestech(nds32) AE3XX Platform
------------------------------------------------------------------------------
-The AE3XX prototype demonstrates the AE3XX example platform on the FPGA. It
-is composed of one Andestech(nds32) processor and AE3XX.
-
-Required properties (in root node):
-- compatible = "andestech,ae3xx";
-
-Example:
-/dts-v1/;
-/ {
-	compatible = "andestech,ae3xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-};
-
-Andestech(nds32) AG101P Platform
------------------------------------------------------------------------------
-AG101P is a generic SoC Platform IP that works with any of Andestech(nds32)
-processors to provide a cost-effective and high performance solution for
-majority of embedded systems in variety of application domains. Users may
-simply attach their IP on one of the system buses together with certain glue
-logics to complete a SoC solution for a specific application. With
-comprehensive simulation and design environments, users may evaluate the
-system performance of their applications and track bugs of their designs
-efficiently. The optional hardware development platform further provides real
-system environment for early prototyping and software/hardware co-development.
-
-Required properties (in root node):
-	compatible = "andestech,ag101p";
-
-Example:
-/dts-v1/;
-/ {
-	compatible = "andestech,ag101p";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-};
diff --git a/Documentation/devicetree/bindings/nds32/atl2c.txt b/Documentation/devicetree/bindings/nds32/atl2c.txt
deleted file mode 100644
index da8ab8e7ae9b..000000000000
--- a/Documentation/devicetree/bindings/nds32/atl2c.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Andestech L2 cache Controller
-
-The level-2 cache controller plays an important role in reducing memory latency
-for high performance systems, such as thoese designs with AndesCore processors.
-Level-2 cache controller in general enhances overall system performance
-signigicantly and the system power consumption might be reduced as well by
-reducing DRAM accesses.
-
-This binding specifies what properties must be available in the device tree
-representation of an Andestech L2 cache controller.
-
-Required properties:
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: "andestech,atl2c"
-	- reg : Physical base address and size of cache controller's memory mapped
-	- cache-unified : Specifies the cache is a unified cache.
-	- cache-level : Should be set to 2 for a level 2 cache.
-
-* Example
-
-	cache-controller@e0500000 {
-		compatible = "andestech,atl2c";
-		reg = <0xe0500000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/nds32/cpus.txt b/Documentation/devicetree/bindings/nds32/cpus.txt
deleted file mode 100644
index 6f9e311b6589..000000000000
--- a/Documentation/devicetree/bindings/nds32/cpus.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Andestech Processor Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a Andestech Processor Core, which is the root node in the
-tree.
-
-Required properties:
-
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: Should be "andestech,<core_name>", "andestech,nds32v3" as fallback.
-		Must contain "andestech,nds32v3" as the most generic value, in addition to
-		one of the following identifiers for a particular CPU core:
-		"andestech,n13"
-		"andestech,n15"
-		"andestech,d15"
-		"andestech,n10"
-		"andestech,d10"
-	- device_type
-		Usage: required
-		Value type: <string>
-		Definition: must be "cpu"
-	- reg: Contains CPU index.
-	- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-* Examples
-
-/ {
-	cpus {
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "andestech,n13", "andestech,nds32v3";
-			reg = <0x0>;
-			clock-frequency = <60000000>
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
index 1626e0a821b0..d30fada2ac39 100644
--- a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
+++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
@@ -51,6 +51,10 @@ properties:
     description:
       Phandle to the device containing custom config.
 
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index 1129f2b58e98..929cf8c0b0fd 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADIN1200/ADIN1300 PHY
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   Bindings for Analog Devices Industrial Ethernet PHYs
@@ -36,6 +36,22 @@ properties:
     enum: [ 4, 8, 12, 16, 20, 24 ]
     default: 8
 
+  adi,phy-output-clock:
+    description: |
+      Select clock output on GP_CLK pin. Two clocks are available:
+      A 25MHz reference and a free-running 125MHz.
+      The phy can alternatively automatically switch between the reference and
+      the 125MHz clocks based on its internal state.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - 25mhz-reference
+      - 125mhz-free-running
+      - adaptive-free-running
+
+  adi,phy-output-reference-clock:
+    description: Enable 25MHz reference clock output on CLK25_REF pin.
+    type: boolean
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
new file mode 100644
index 000000000000..b6bd8ee38a18
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADI ADIN1110 MAC-PHY
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  The ADIN1110 is a low power single port 10BASE-T1L MAC-
+  PHY designed for industrial Ethernet applications. It integrates
+  an Ethernet PHY core with a MAC and all the associated analog
+  circuitry, input and output clock buffering.
+
+  The ADIN2111 is a low power, low complexity, two-Ethernet ports
+  switch with integrated 10BASE-T1L PHYs and one serial peripheral
+  interface (SPI) port. The device is designed for industrial Ethernet
+  applications using low power constrained nodes and is compliant
+  with the IEEE 802.3cg-2019 Ethernet standard for long reach
+  10 Mbps single pair Ethernet (SPE).
+
+  The device has a 4-wire SPI interface for communication
+  between the MAC and host processor.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adin1110
+      - adi,adin2111
+
+  reg:
+    maxItems: 1
+
+  adi,spi-crc:
+    description: |
+      Enable CRC8 checks on SPI read/writes.
+    type: boolean
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "adi,adin2111";
+            reg = <0>;
+            spi-max-frequency = <24500000>;
+
+            adi,spi-crc;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+            local-mac-address = [ 00 11 22 33 44 55 ];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
index 8d8560a67abf..987b91b9afe9 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings
+title: Allwinner A10 EMAC Ethernet Controller
 
 allOf:
   - $ref: "ethernet-controller.yaml#"
@@ -29,6 +29,10 @@ properties:
   allwinner,sram:
     description: Phandle to the device SRAM
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
index 767193ec1d32..ede977cdfb8d 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MDIO Controller Device Tree Bindings
+title: Allwinner A10 MDIO Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 703d0d886884..3bd912ed7c7e 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC Device Tree Bindings
+title: Allwinner A20 GMAC
 
 allOf:
   - $ref: "snps,dwmac.yaml#"
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 407586bc366b..1432fda3b603 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t EMAC Device Tree Bindings
+title: Allwinner A83t EMAC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
           - enum:
               - allwinner,sun20i-d1-emac
               - allwinner,sun50i-h6-emac
+              - allwinner,sun50i-h616-emac0
           - const: allwinner,sun50i-a64-emac
 
   reg:
@@ -122,6 +123,7 @@ allOf:
 
         mdio-mux:
           type: object
+          unevaluatedProperties: false
 
           properties:
             compatible:
@@ -132,17 +134,18 @@ allOf:
               description:
                 Phandle to EMAC MDIO.
 
+            "#address-cells":
+              const: 1
+
+            "#size-cells":
+              const: 0
+
             mdio@1:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: Internal MDIO Bus
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 compatible:
                   const: allwinner,sun8i-h3-mdio-internal
 
@@ -168,16 +171,11 @@ allOf:
 
 
             mdio@2:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: External MDIO Bus (H3 only)
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 reg:
                   const: 2
 
diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt
deleted file mode 100644
index 0b7d4d3758ea..000000000000
--- a/Documentation/devicetree/bindings/net/altera_tse.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-* Altera Triple-Speed Ethernet MAC driver (TSE)
-
-Required properties:
-- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
-		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
-		ALTR is supported for legacy device trees, but is deprecated.
-		altr should be used for all new designs.
-- reg: Address and length of the register set for the device. It contains
-  the information of registers in the same order as described by reg-names
-- reg-names: Should contain the reg names
-  "control_port": MAC configuration space region
-  "tx_csr":       xDMA Tx dispatcher control and status space region
-  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
-  "rx_csr" :      xDMA Rx dispatcher control and status space region
-  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
-  "rx_resp":      MSGDMA Rx dispatcher response space region
-  "s1":		  SGDMA descriptor memory
-- interrupts: Should contain the TSE interrupts and it's mode.
-- interrupt-names: Should contain the interrupt names
-  "rx_irq":       xDMA Rx dispatcher interrupt
-  "tx_irq":       xDMA Tx dispatcher interrupt
-- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
-- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
-- phy-mode: See ethernet.txt in the same directory.
-- phy-handle: See ethernet.txt in the same directory.
-- phy-addr: See ethernet.txt in the same directory. A configuration should
-		include phy-handle or phy-addr.
-- altr,has-supplementary-unicast:
-		If present, TSE supports additional unicast addresses.
-		Otherwise additional unicast addresses are not supported.
-- altr,has-hash-multicast-filter:
-		If present, TSE supports a hash based multicast filter.
-		Otherwise, hash-based multicast filtering is not supported.
-
-- mdio device tree subnode: When the TSE has a phy connected to its local
-		mdio, there must be device tree subnode with the following
-		required properties:
-
-	- compatible: Must be "altr,tse-mdio".
-	- #address-cells: Must be <1>.
-	- #size-cells: Must be <0>.
-
-	For each phy on the mdio bus, there must be a node with the following
-	fields:
-
-	- reg: phy id used to communicate to phy.
-	- device_type: Must be "ethernet-phy".
-
-The MAC address will be determined using the optional properties defined in
-ethernet.txt.
-
-Example:
-
-	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
-		compatible = "altr,tse-msgdma-1.0";
-		reg =	<0x00000001 0x00000000 0x00000400>,
-			<0x00000001 0x00000460 0x00000020>,
-			<0x00000001 0x00000480 0x00000020>,
-			<0x00000001 0x000004A0 0x00000008>,
-			<0x00000001 0x00000400 0x00000020>,
-			<0x00000001 0x00000420 0x00000020>;
-		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 41 4>, <0 40 4>;
-		interrupt-names = "rx_irq", "tx_irq";
-		rx-fifo-depth = <2048>;
-		tx-fifo-depth = <2048>;
-		address-bits = <48>;
-		max-frame-size = <1500>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		phy-mode = "gmii";
-		altr,has-supplementary-unicast;
-		altr,has-hash-multicast-filter;
-		phy-handle = <&phy0>;
-		mdio {
-			compatible = "altr,tse-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: ethernet-phy@0 {
-				reg = <0x0>;
-				device_type = "ethernet-phy";
-			};
-
-			phy1: ethernet-phy@1 {
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-
-		};
-	};
-
-	tse_sub_1_eth_tse_0: ethernet@1,00001000 {
-		compatible = "altr,tse-msgdma-1.0";
-		reg = 	<0x00000001 0x00001000 0x00000400>,
-			<0x00000001 0x00001460 0x00000020>,
-			<0x00000001 0x00001480 0x00000020>,
-			<0x00000001 0x000014A0 0x00000008>,
-			<0x00000001 0x00001400 0x00000020>,
-			<0x00000001 0x00001420 0x00000020>;
-		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 43 4>, <0 42 4>;
-		interrupt-names = "rx_irq", "tx_irq";
-		rx-fifo-depth = <2048>;
-		tx-fifo-depth = <2048>;
-		address-bits = <48>;
-		max-frame-size = <1500>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		phy-mode = "gmii";
-		altr,has-supplementary-unicast;
-		altr,has-hash-multicast-filter;
-		phy-handle = <&phy1>;
-	};
diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml
new file mode 100644
index 000000000000..8d1d94494349
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/altr,tse.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,tse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Triple Speed Ethernet MAC driver (TSE)
+
+maintainers:
+  - Maxime Chevallier <maxime.chevallier@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: altr,tse-1.0
+      - const: ALTR,tse-1.0
+        deprecated: true
+      - const: altr,tse-msgdma-1.0
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: rx_irq
+      - const: tx_irq
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the RX FIFO
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the TX FIFO
+
+  altr,has-supplementary-unicast:
+    type: boolean
+    description:
+      If present, TSE supports additional unicast addresses.
+
+  altr,has-hash-multicast-filter:
+    type: boolean
+    description:
+      If present, TSE supports hash based multicast filter.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Creates and registers an MDIO bus.
+
+    properties:
+      compatible:
+        const: altr,tse-mdio
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - rx-fifo-depth
+  - tx-fifo-depth
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: altr,tse-1.0
+              - const: ALTR,tse-1.0
+    then:
+      properties:
+        reg:
+          minItems: 4
+        reg-names:
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: tx_csr
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - altr,tse-msgdma-1.0
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 7
+        reg-names:
+          minItems: 6
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: rx_desc
+            - const: rx_resp
+            - const: tx_csr
+            - const: tx_desc
+            - const: pcs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tse_sub_0: ethernet@c0100000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0xc0100000 0x00000400>,
+              <0xc0101000 0x00000020>,
+              <0xc0102000 0x00000020>,
+              <0xc0103000 0x00000008>,
+              <0xc0104000 0x00000020>,
+              <0xc0105000 0x00000020>,
+              <0xc0106000 0x00000100>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs";
+        interrupt-parent = <&intc>;
+        interrupts = <0 44 4>,<0 45 4>;
+        interrupt-names = "rx_irq","tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        sfp = <&sfp0>;
+        phy-mode = "sgmii";
+        managed = "in-band-status";
+    };
+  - |
+    tse_sub_1_eth_tse_0: ethernet@1,00001000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0x00001000 0x00000400>,
+              <0x00001460 0x00000020>,
+              <0x00001480 0x00000020>,
+              <0x000014A0 0x00000008>,
+              <0x00001400 0x00000020>,
+              <0x00001420 0x00000020>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <0 43 4>, <0 42 4>;
+        interrupt-names = "rx_irq", "tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        phy-mode = "gmii";
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        phy-handle = <&phy1>;
+        mdio {
+            compatible = "altr,tse-mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                reg = <0x1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 608e1d62bed5..ddd5a073c3a8 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson DWMAC Ethernet controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 
 # We need a select here so we don't match all nodes with 'snps,dwmac'
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
new file mode 100644
index 000000000000..1af52358de4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired USB Ethernet devices.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbb95,1720   # ASIX AX88172
+          - usbb95,172a   # ASIX AX88172A
+          - usbb95,1780   # ASIX AX88178
+          - usbb95,7720   # ASIX AX88772
+          - usbb95,772a   # ASIX AX88772A
+          - usbb95,772b   # ASIX AX88772B
+          - usbb95,7e2b   # ASIX AX88772B
+
+  reg: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usbb95,7e2b";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb1@1 {
+            compatible = "usb1234,5678";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+               compatible = "usbb95,772b";
+               reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
index 1c88820cbcdf..f81eda8cb0a5 100644
--- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -20,10 +20,14 @@ allOf:
 properties:
   compatible:
     const: aspeed,ast2600-mdio
+
   reg:
     maxItems: 1
     description: The register range of the MDIO controller instance
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -34,11 +38,13 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/ast2600-clock.h>
     mdio0: mdio@1e650000 {
             compatible = "aspeed,ast2600-mdio";
             reg = <0x1e650000 0x8>;
             #address-cells = <1>;
             #size-cells = <0>;
+            resets = <&syscon ASPEED_RESET_MII>;
 
             ethphy0: ethernet-phy@0 {
                     compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
deleted file mode 100644
index 0120ebe93262..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Broadcom AMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible:	"brcm,amac"
-		"brcm,nsp-amac"
-		"brcm,ns2-amac"
- - reg:		Address and length of the register set for the device. It
-		contains the information of registers in the same order as
-		described by reg-names
- - reg-names:	Names of the registers.
-		"amac_base":	Address and length of the GMAC registers
-		"idm_base":	Address and length of the GMAC IDM registers
-				(required for NSP and Northstar2)
-		"nicpm_base":	Address and length of the NIC Port Manager
-				registers (required for Northstar2)
- - interrupts:	Interrupt number
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Examples:
-
-amac0: ethernet@18022000 {
-	compatible = "brcm,nsp-amac";
-	reg = <0x18022000 0x1000>,
-	      <0x18110000 0x1000>;
-	reg-names = "amac_base", "idm_base";
-	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
new file mode 100644
index 000000000000..ee2eac8f5710
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,amac
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-amac
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-amac
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+
+properties:
+  compatible:
+    enum:
+      - brcm,amac
+      - brcm,nsp-amac
+      - brcm,ns2-amac
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: amac_base
+      - const: idm_base
+      - const: nicpm_base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   amac0: ethernet@18022000 {
+      compatible = "brcm,nsp-amac";
+      reg = <0x18022000 0x1000>,
+            <0x18110000 0x1000>;
+      reg-names = "amac_base", "idm_base";
+      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+   };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
index 2f34fda55fd0..9ef28c2a0afc 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
@@ -15,18 +15,12 @@ description:
   properties as well to generate desired MDIO transaction on appropriate bus.
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio-mux.yaml#
 
 properties:
   compatible:
     const: brcm,bcm6368-mdio-mux
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   reg:
     maxItems: 1
 
@@ -34,24 +28,6 @@ required:
   - compatible
   - reg
 
-patternProperties:
-  '^mdio@[0-1]$':
-    type: object
-    properties:
-      reg:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-    required:
-      - reg
-      - "#address-cells"
-      - "#size-cells"
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
deleted file mode 100644
index 0b5994fba35f..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ /dev/null
@@ -1,125 +0,0 @@
-* Broadcom BCM7xxx Ethernet Controller (GENET)
-
-Required properties:
-- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
-  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5" or
-  "brcm,bcm7712-genet-v5".
-- reg: address and length of the register set for the device
-- interrupts and/or interrupts-extended: must be two cells, the first cell
-  is the general purpose interrupt line, while the second cell is the
-  interrupt for the ring RX and TX queues operating in ring mode.  An
-  optional third interrupt cell for Wake-on-LAN can be specified.
-  See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for information on the property specifics.
-- phy-mode: see ethernet.txt file in the same directory
-- #address-cells: should be 1
-- #size-cells: should be 1
-
-Optional properties:
-- clocks: When provided, must be two phandles to the functional clocks nodes
-  of the GENET block. The first phandle is the main GENET clock used during
-  normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "enet" and second should be "enet-wol".
-
-- phy-handle: See ethernet.txt file in the same directory; used to describe
-  configurations where a PHY (internal or external) is used.
-
-- fixed-link: When the GENET interface is connected to a MoCA hardware block or
-  when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
-  voluntarily disabled, this property should be used to describe the "fixed link".
-  See Documentation/devicetree/bindings/net/fixed-link.txt for information on
-  the property specifics
-
-Required child nodes:
-
-- mdio bus node: this node should always be present regardless of the PHY
-  configuration of the GENET instance
-
-MDIO bus node required properties:
-
-- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
-  has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
-  with brcm,genet-mdio-v4)
-- reg: address and length relative to the parent node base register address
-- #address-cells: address cell for MDIO bus addressing, should be 1
-- #size-cells: size of the cells for MDIO bus addressing, should be 0
-
-Ethernet PHY node properties:
-
-See Documentation/devicetree/bindings/net/phy.txt for the list of required and
-optional properties.
-
-Internal Gigabit PHY example:
-
-ethernet@f0b60000 {
-	phy-mode = "internal";
-	phy-handle = <&phy1>;
-	mac-address = [ 00 10 18 36 23 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b60000 0xfc4c>;
-	interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy1: ethernet-phy@1 {
-			max-speed = <1000>;
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-MoCA interface / MAC to MAC example:
-
-ethernet@f0b80000 {
-	phy-mode = "moca";
-	fixed-link = <1 0 1000 0 0>;
-	mac-address = [ 00 10 18 36 24 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b80000 0xfc4c>;
-	interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-	};
-};
-
-
-External MDIO-connected Gigabit PHY/switch:
-
-ethernet@f0ba0000 {
-	phy-mode = "rgmii";
-	phy-handle = <&phy0>;
-	mac-address = [ 00 10 18 36 26 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0ba0000 0xfc4c>;
-	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy0: ethernet-phy@0 {
-			max-speed = <1000>;
-			reg = <0x0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
new file mode 100644
index 000000000000..e5af53508e25
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Controller (GENET) binding
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-v1
+      - brcm,genet-v2
+      - brcm,genet-v3
+      - brcm,genet-v4
+      - brcm,genet-v5
+      - brcm,bcm2711-genet-v5
+      - brcm,bcm7712-genet-v5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: general purpose interrupt line
+      - description: RX and TX rings interrupt line
+      - description: Wake-on-LAN interrupt line
+
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main clock
+      - description: EEE clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enet
+      - const: enet-eee
+      - const: enet-wol
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: "brcm,unimac-mdio.yaml"
+
+    description:
+      GENET internal UniMAC MDIO bus
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+  - |
+    ethernet@f0b60000 {
+        phy-mode = "internal";
+        phy-handle = <&phy1>;
+        mac-address = [ 00 10 18 36 23 1a ];
+        compatible = "brcm,genet-v4";
+        reg = <0xf0b60000 0xfc4c>;
+        interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mdio0: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy1: ethernet-phy@1 {
+                max-speed = <1000>;
+                reg = <1>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
+
+  - |
+    ethernet@f0b80000 {
+        phy-mode = "moca";
+        fixed-link = <1 0 1000 0 0>;
+        mac-address = [ 00 10 18 36 24 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0b80000 0xfc4c>;
+        interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+        mdio1: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+        };
+    };
+
+  - |
+    ethernet@f0ba0000 {
+        phy-mode = "rgmii";
+        phy-handle = <&phy0>;
+        mac-address = [ 00 10 18 36 26 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0ba0000 0xfc4c>;
+        interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+        mdio2: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy0: ethernet-phy@0 {
+                max-speed = <1000>;
+                reg = <0>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
deleted file mode 100644
index deb9e852ea27..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs.
-
-This MDIO bus multiplexer defines buses that could be internal as well as
-external to SoCs and could accept MDIO transaction compatible to C-22 or
-C-45 Clause. When child bus is selected, one needs to select these two
-properties as well to generate desired MDIO transaction on appropriate bus.
-
-Required properties in addition to the generic multiplexer properties:
-
-MDIO multiplexer node:
-- compatible: brcm,mdio-mux-iproc.
-
-Every non-ethernet PHY requires a compatible so that it could be probed based
-on this compatible string.
-
-Optional properties:
-- clocks: phandle of the core clock which drives the mdio block.
-
-Additional information regarding generic multiplexer properties can be found
-at- Documentation/devicetree/bindings/net/mdio-mux.yaml
-
-
-for example:
-		mdio_mux_iproc: mdio-mux@66020000 {
-			compatible = "brcm,mdio-mux-iproc";
-			reg = <0x66020000 0x250>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mdio@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy0: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-
-			mdio@7 {
-				reg = <0x7>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy1: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-			mdio@10 {
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gphy0: eth-phy@10 {
-					reg = <0x10>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
new file mode 100644
index 000000000000..af96b4fd89d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer found in Broadcom iProc based SoCs.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs and could accept MDIO transaction compatible to C-22 or
+  C-45 Clause. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,mdio-mux-iproc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: core clock driving the MDIO block
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio_mux_iproc: mdio-mux@66020000 {
+        compatible = "brcm,mdio-mux-iproc";
+        reg = <0x66020000 0x250>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+           reg = <0x0>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy0: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@7 {
+           reg = <0x7>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy1: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@10 {
+           reg = <0x10>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           gphy0: eth-phy@10 {
+              reg = <0x10>;
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
deleted file mode 100644
index 75736739bfdd..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
-	      "brcm,systemport-v1.00"
-	      "brcm,systemportlite-v1.00" or
-	      "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
-  interrupts, and the second cell should be for the transmit queues. An
-  optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
-  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
-  the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-- clocks: When provided, must be two phandles to the functional clocks nodes of
-  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
-  during normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "sw_sysport" and second should be "sw_sysportwol".
-
-Example:
-ethernet@f04a0000 {
-	compatible = "brcm,systemport-v1.00";
-	reg = <0xf04a0000 0x4650>;
-	local-mac-address = [ 00 11 22 33 44 55 ];
-	fixed-link = <0 1 1000 0 0>;
-	phy-mode = "gmii";
-	interrupts = <0x0 0x16 0x0>,
-		<0x0 0x17 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 000000000000..5fc9c9fafd85
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,systemport-v1.00
+      - brcm,systemportlite-v1.00
+      - brcm,systemport
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: interrupt line for RX queues
+      - description: interrupt line for TX queues
+      - description: interrupt line for Wake-on-LAN
+
+  clocks:
+    items:
+      - description: main clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    items:
+      - const: sw_sysport
+      - const: sw_sysportwol
+
+  systemport,num-tier2-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-tier1-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-txq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW transmit queues
+
+  systemport,num-rxq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW receive queues
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f04a0000 {
+        compatible = "brcm,systemport-v1.00";
+        reg = <0xf04a0000 0x4650>;
+        local-mac-address = [ 00 11 22 33 44 55 ];
+        phy-mode = "gmii";
+        interrupts = <0x0 0x16 0x0>,
+                     <0x0 0x17 0x0>;
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
index f4f4c37f1d4e..0be426ee1e44 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -7,6 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Broadcom UniMAC MDIO bus controller
 
 maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
   - Rafał Miłecki <rafal@milecki.pl>
 
 allOf:
@@ -64,7 +66,6 @@ unevaluatedProperties: false
 
 required:
   - reg
-  - reg-names
   - '#address-cells'
   - '#size-cells'
 
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
index 5aac094fd217..445b2a553625 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -23,6 +23,8 @@ properties:
       - brcm,bcm4345c5
       - brcm,bcm43540-bt
       - brcm,bcm4335a0
+      - brcm,bcm4349-bt
+      - infineon,cyw55572-bt
 
   shutdown-gpios:
     maxItems: 1
@@ -92,6 +94,13 @@ properties:
        pcm-sync-mode: slave, master
        pcm-clock-mode: slave, master
 
+  brcm,requires-autobaud-mode:
+    type: boolean
+    description:
+      Set this property if autobaud mode is required. Autobaud mode is required
+      if the device's initial baud rate in normal mode is not supported by the
+      host or if the device requires autobaud mode startup before loading FW.
+
   interrupts:
     items:
       - description: Handle to the line HOST_WAKE used to wake
@@ -108,6 +117,22 @@ properties:
 required:
   - compatible
 
+dependencies:
+  brcm,requires-autobaud-mode: [ 'shutdown-gpios' ]
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - brcm,bcm20702a1
+            - brcm,bcm4329-bt
+            - brcm,bcm4330-bt
+then:
+  properties:
+    reset-gpios: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
index c93fe9d3ea82..3c51b2d02957 100644
--- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: can-controller.yaml#
+
 properties:
   compatible:
     oneOf:
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
index 2cd145a642f1..51aa89ac7e85 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -56,10 +56,10 @@ properties:
       offset).
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The phandle to the system control region.
-        - description: The register offset.
-        - description: The CAN instance number.
+      - items:
+          - description: The phandle to the system control region.
+          - description: The register offset.
+          - description: The CAN instance number.
 
   resets:
     maxItems: 1
@@ -80,8 +80,6 @@ if:
 then:
   properties:
     interrupts:
-      minItems: 4
-      maxItems: 4
       items:
         - description: Error and status IRQ
         - description: Message object IRQ
@@ -91,7 +89,6 @@ then:
 else:
   properties:
     interrupts:
-      maxItems: 1
       items:
         - description: Error and status IRQ
 
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index fb547e26c676..26aa0830eea1 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -9,7 +9,10 @@ title: Bosch MCAN controller Bindings
 description: Bosch MCAN controller for CAN bus
 
 maintainers:
-  - Sriram Dash <sriram.dash@samsung.com>
+  - Chandrasekar Ramakrishnan <rcsekar@samsung.com>
+
+allOf:
+  - $ref: can-controller.yaml#
 
 properties:
   compatible:
@@ -66,8 +69,8 @@ properties:
       M_CAN includes the following elements according to user manual:
       11-bit Filter	0-128 elements / 0-128 words
       29-bit Filter	0-64 elements / 0-128 words
-      Rx FIFO 0	0-64 elements / 0-1152 words
-      Rx FIFO 1	0-64 elements / 0-1152 words
+      Rx FIFO 0		0-64 elements / 0-1152 words
+      Rx FIFO 1		0-64 elements / 0-1152 words
       Rx Buffers	0-64 elements / 0-1152 words
       Tx Event FIFO	0-32 elements / 0-64 words
       Tx Buffers	0-32 elements / 0-576 words
@@ -76,33 +79,32 @@ properties:
       M_CAN user manual for details.
     $ref: /schemas/types.yaml#/definitions/int32-array
     items:
-      items:
-        - description: The 'offset' is an address offset of the Message RAM where
-            the following elements start from. This is usually set to 0x0 if
-            you're using a private Message RAM.
-          default: 0
-        - description: 11-bit Filter 0-128 elements / 0-128 words
-          minimum: 0
-          maximum: 128
-        - description: 29-bit Filter 0-64 elements / 0-128 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 0 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 1 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx Buffers 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Tx Event FIFO 0-32 elements / 0-64 words
-          minimum: 0
-          maximum: 32
-        - description: Tx Buffers 0-32 elements / 0-576 words
-          minimum: 0
-          maximum: 32
-    maxItems: 1
+      - description: The 'offset' is an address offset of the Message RAM where
+          the following elements start from. This is usually set to 0x0 if
+          you're using a private Message RAM.
+        default: 0
+      - description: 11-bit Filter 0-128 elements / 0-128 words
+        minimum: 0
+        maximum: 128
+      - description: 29-bit Filter 0-64 elements / 0-128 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 0 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 1 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx Buffers 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Tx Event FIFO 0-32 elements / 0-64 words
+        minimum: 0
+        maximum: 32
+      - description: Tx Buffers 0-32 elements / 0-576 words
+        minimum: 0
+        maximum: 32
+    minItems: 1
 
   power-domains:
     description:
diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
new file mode 100644
index 000000000000..4635cb96fc64
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CTU CAN FD Open-source IP Core Device Tree Bindings
+
+description: |
+  Open-source CAN FD IP core developed at the Czech Technical University in Prague
+
+  The core sources and documentation on project page
+    [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
+    [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf
+
+  Integration in Xilinx Zynq SoC based system together with
+  OpenCores SJA1000 compatible controllers
+    [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
+  Martin Jerabek dimploma thesis with integration and testing
+  framework description
+    [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
+
+maintainers:
+  - Pavel Pisa <pisa@cmp.felk.cvut.cz>
+  - Ondrej Ille <ondrej.ille@gmail.com>
+  - Martin Jerabek <martin.jerabek01@gmail.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ctu,ctucanfd-2
+          - const: ctu,ctucanfd
+      - const: ctu,ctucanfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      phandle of reference clock (100 MHz is appropriate
+      for FPGA implementation on Zynq-7000 system).
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ctu_can_fd_0: can@43c30000 {
+      compatible = "ctu,ctucanfd";
+      interrupts = <0 30 4>;
+      clocks = <&clkc 15>;
+      reg = <0x43c30000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 3f0ee17c1461..e52db841bb8c 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -84,12 +84,12 @@ properties:
       req_bit is the bit offset of CAN stop request.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset of CAN stop request.
-          maximum: 0xff
-        - description: The 'req_bit' is the bit offset of CAN stop request.
-          maximum: 0x1f
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+            maximum: 0xff
+          - description: The 'req_bit' is the bit offset of CAN stop request.
+            maximum: 0x1f
 
   fsl,clk-source:
     description: |
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
index 2a884c1fe0e0..7a73057707b4 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -5,22 +5,26 @@ $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title:
-  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
-  bindings
+  Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN
+  controller device tree bindings
 
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
 
+allOf:
+  - $ref: can-controller.yaml#
+
 properties:
   compatible:
     oneOf:
-      - const: microchip,mcp2517fd
-        description: for MCP2517FD
-      - const: microchip,mcp2518fd
-        description: for MCP2518FD
-      - const: microchip,mcp251xfd
-        description: to autodetect chip variant
-
+      - enum:
+          - microchip,mcp2517fd
+          - microchip,mcp2518fd
+          - microchip,mcp251xfd
+      - items:
+          - enum:
+              - microchip,mcp251863
+          - const: microchip,mcp2518fd
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
new file mode 100644
index 000000000000..45aa3de7cf01
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip PolarFire SoC (MPFS) can controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,mpfs-can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    can@2010c000 {
+        compatible = "microchip,mpfs-can";
+        reg = <0x2010c000 0x1000>;
+        clocks = <&clkcfg 17>;
+        interrupt-parent = <&plic>;
+        interrupts = <56>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
new file mode 100644
index 000000000000..144a3785132c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+maintainers:
+  - Wolfgang Grandegger <wg@grandegger.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,sja1000
+          - technologic,sja1000
+      - items:
+          - enum:
+              - renesas,r9a06g032-sja1000 # RZ/N1D
+              - renesas,r9a06g033-sja1000 # RZ/N1S
+          - const: renesas,rzn1-sja1000 # RZ/N1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg-io-width:
+    description: I/O register width (in bytes) implemented by this device
+    default: 1
+    enum: [ 1, 2, 4 ]
+
+  nxp,external-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16000000
+    description: |
+      Frequency of the external oscillator clock in Hz.
+      The internal clock frequency used by the SJA1000 is half of that value.
+
+  nxp,tx-output-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 1
+    description: |
+      operation mode of the TX output control logic. Valid values are:
+        <0> : bi-phase output mode
+        <1> : normal output mode (default)
+        <2> : test output mode
+        <3> : clock output mode
+
+  nxp,tx-output-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x02
+    description: |
+      TX output pin configuration. Valid values are any one of the below
+      or combination of TX0 and TX1:
+        <0x01> : TX0 invert
+        <0x02> : TX0 pull-down (default)
+        <0x04> : TX0 pull-up
+        <0x06> : TX0 push-pull
+        <0x08> : TX1 invert
+        <0x10> : TX1 pull-down
+        <0x20> : TX1 pull-up
+        <0x30> : TX1 push-pull
+
+  nxp,clock-out-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      clock frequency in Hz on the CLKOUT pin.
+      If not specified or if the specified value is 0, the CLKOUT pin
+      will be disabled.
+
+  nxp,no-comparator-bypass:
+    type: boolean
+    description: Allows to disable the CAN input comparator.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - technologic,sja1000
+              - renesas,rzn1-sja1000
+    then:
+      required:
+        - reg-io-width
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzn1-sja1000
+    then:
+      required:
+        - clocks
+        - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    can@1a000 {
+        compatible = "technologic,sja1000";
+        reg = <0x1a000 0x100>;
+        interrupts = <1>;
+        reg-io-width = <2>;
+        nxp,tx-output-config = <0x06>;
+        nxp,external-clock-frequency = <24000000>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    can@52104000 {
+        compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+        reg = <0x52104000 0x800>;
+        reg-io-width = <4>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+        power-domains = <&sysctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 546c6e6d2fb0..6f71fc96bc4e 100644
--- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -23,6 +23,7 @@ properties:
               - renesas,r8a774e1-canfd     # RZ/G2H
               - renesas,r8a7795-canfd      # R-Car H3
               - renesas,r8a7796-canfd      # R-Car M3-W
+              - renesas,r8a77961-canfd     # R-Car M3-W+
               - renesas,r8a77965-canfd     # R-Car M3-N
               - renesas,r8a77970-canfd     # R-Car V3M
               - renesas,r8a77980-canfd     # R-Car V3H
@@ -32,9 +33,13 @@ properties:
 
       - items:
           - enum:
+              - renesas,r9a07g043-canfd    # RZ/G2UL
               - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
+              - renesas,r9a07g054-canfd    # RZ/V2L
           - const: renesas,rzg2l-canfd     # RZ/G2L family
 
+      - const: renesas,r8a779a0-canfd      # R-Car V3U
+
   reg:
     maxItems: 1
 
@@ -83,6 +88,7 @@ required:
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - clocks
   - clock-names
   - power-domains
@@ -131,7 +137,6 @@ then:
         - const: rstc_n
 
   required:
-    - interrupt-names
     - reset-names
 else:
   properties:
@@ -162,6 +167,7 @@ examples:
             reg = <0xe66c0000 0x8000>;
             interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch_int", "g_int";
             clocks = <&cpg CPG_MOD 914>,
                      <&cpg CPG_CORE R8A7795_CLK_CANFD>,
                      <&can_clk>;
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
deleted file mode 100644
index ac3160eca96a..000000000000
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
-
-Required properties:
-
-- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
-
-- reg : should specify the chip select, address offset and size required
-	to map the registers of the SJA1000. The size is usually 0x80.
-
-- interrupts: property with a value describing the interrupt source
-	(number and sensitivity) required for the SJA1000.
-
-Optional properties:
-
-- reg-io-width : Specify the size (in bytes) of the IO accesses that
-	should be performed on the device.  Valid value is 1, 2 or 4.
-	This property is ignored for technologic version.
-	Default to 1 (8 bits).
-
-- nxp,external-clock-frequency : Frequency of the external oscillator
-	clock in Hz. Note that the internal clock frequency used by the
-	SJA1000 is half of that value. If not specified, a default value
-	of 16000000 (16 MHz) is used.
-
-- nxp,tx-output-mode : operation mode of the TX output control logic:
-	<0x0> : bi-phase output mode
-	<0x1> : normal output mode (default)
-	<0x2> : test output mode
-	<0x3> : clock output mode
-
-- nxp,tx-output-config : TX output pin configuration:
-	<0x01> : TX0 invert
-	<0x02> : TX0 pull-down (default)
-	<0x04> : TX0 pull-up
-	<0x06> : TX0 push-pull
-	<0x08> : TX1 invert
-	<0x10> : TX1 pull-down
-	<0x20> : TX1 pull-up
-	<0x30> : TX1 push-pull
-
-- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
-	If not specified or if the specified value is 0, the CLKOUT pin
-	will be disabled.
-
-- nxp,no-comparator-bypass : Allows to disable the CAN input comparator.
-
-For further information, please have a look to the SJA1000 data sheet.
-
-Examples:
-
-can@3,100 {
-	compatible = "nxp,sja1000";
-	reg = <3 0x100 0x80>;
-	interrupts = <2 0>;
-	interrupt-parent = <&mpic>;
-	nxp,external-clock-frequency = <16000000>;
-};
-
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
new file mode 100644
index 000000000000..65af8183cb9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Xilinx Axi CAN/Zynq CANPS controller
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-can-1.0
+      - xlnx,axi-can-1.00.a
+      - xlnx,canfd-1.0
+      - xlnx,canfd-2.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  tx-fifo-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Tx fifo depth (Zynq, Axi CAN).
+
+  rx-fifo-depth:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
+
+  tx-mailbox-count:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description: CAN Tx mailbox buffer count (CAN FD)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynq-can-1.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: pclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,axi-can-1.00.a
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,canfd-1.0
+              - xlnx,canfd-2.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-mailbox-count
+        - rx-fifo-depth
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    can@e0008000 {
+        compatible = "xlnx,zynq-can-1.0";
+        reg = <0xe0008000 0x1000>;
+        clocks = <&clkc 19>, <&clkc 36>;
+        clock-names = "can_clk", "pclk";
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&intc>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,axi-can-1.00.a";
+        reg = <0x40000000 0x10000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,canfd-1.0";
+        reg = <0x40000000 0x2000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x20>;
+    };
+
+  - |
+    can@ff060000 {
+        compatible = "xlnx,canfd-2.0";
+        reg = <0xff060000 0x6000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x40>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
deleted file mode 100644
index 100cc40b8510..000000000000
--- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Should be:
-			  - "xlnx,zynq-can-1.0" for Zynq CAN controllers
-			  - "xlnx,axi-can-1.00.a" for Axi CAN controllers
-			  - "xlnx,canfd-1.0" for CAN FD controllers
-			  - "xlnx,canfd-2.0" for CAN FD 2.0 controllers
-- reg			: Physical base address and size of the controller
-			  registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names
-			  - "can_clk", "pclk" (For CANPS),
-			  - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-- tx-fifo-depth		: Can Tx fifo depth (Zynq, Axi CAN).
-- rx-fifo-depth		: Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
-                          sequential Rx mode).
-- tx-mailbox-count	: Can Tx mailbox buffer count (CAN FD).
-- rx-mailbox-count	: Can Rx mailbox buffer count (CAN FD in mailbox Rx
-			  mode).
-
-
-Example:
-
-For Zynq CANPS Dts file:
-	zynq_can_0: can@e0008000 {
-			compatible = "xlnx,zynq-can-1.0";
-			clocks = <&clkc 19>, <&clkc 36>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0008000 0x1000>;
-			interrupts = <0 28 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For Axi CAN Dts file:
-	axi_can_0: axi-can@40000000 {
-			compatible = "xlnx,axi-can-1.00.a";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk","s_axi_aclk" ;
-			reg = <0x40000000 0x10000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For CAN FD Dts file:
-	canfd_0: canfd@40000000 {
-			compatible = "xlnx,canfd-1.0";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk", "s_axi_aclk";
-			reg = <0x40000000 0x2000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-mailbox-count = <0x20>;
-			rx-fifo-depth = <0x20>;
-		};
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
new file mode 100644
index 000000000000..318f4efe7f6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MACB/GEM Ethernet controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cdns,at91rm9200-emac  # Atmel at91rm9200 SoC
+          - const: cdns,emac          # Generic
+
+      - items:
+          - enum:
+              - cdns,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - cdns,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+        deprecated: true
+
+      - items:
+          - enum:
+              - xlnx,versal-gem       # Xilinx Versal
+              - xlnx,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - xlnx,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+
+      - items:
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs
+              - cdns,sam9x60-macb     # Microchip sam9x60 SoC
+              - microchip,mpfs-macb   # Microchip PolarFire SoC
+          - const: cdns,macb          # Generic
+
+      - items:
+          - enum:
+              - atmel,sama5d3-macb    # 10/100Mbit IP on Atmel sama5d3 SoCs
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
+          - const: cdns,macb          # Generic
+
+      - enum:
+          - atmel,sama5d29-gem        # GEM XL IP (10/100) on Atmel sama5d29 SoCs
+          - atmel,sama5d2-gem         # GEM IP (10/100) on Atmel sama5d2 SoCs
+          - atmel,sama5d3-gem         # Gigabit IP on Atmel sama5d3 SoCs
+          - atmel,sama5d4-gem         # GEM IP (10/100) on Atmel sama5d4 SoCs
+          - cdns,np4-macb             # NP4 SoC devices
+          - microchip,sama7g5-emac    # Microchip SAMA7G5 ethernet interface
+          - microchip,sama7g5-gem     # Microchip SAMA7G5 gigabit ethernet interface
+          - sifive,fu540-c000-gem     # SiFive FU540-C000 SoC
+          - cdns,emac                 # Generic
+          - cdns,gem                  # Generic
+          - cdns,macb                 # Generic
+
+  reg:
+    minItems: 1
+    items:
+      - description: Basic register set
+      - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: One interrupt per available hardware queue
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    items:
+      - enum: [ ether_clk, hclk, pclk ]
+      - enum: [ hclk, pclk ]
+      - const: tx_clk
+      - enum: [ rx_clk, tsu_clk ]
+      - const: tsu_clk
+
+  local-mac-address: true
+
+  phy-mode: true
+
+  phy-handle: true
+
+  phys:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Recommended with ZynqMP, specify reset control for this
+      controller instance with zynqmp-reset driver.
+
+  reset-names:
+    maxItems: 1
+
+  fixed-link: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  mdio:
+    type: object
+    description:
+      Node containing PHY children. If this node is not present, then PHYs will
+      be direct children.
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      reset-gpios: true
+
+      magic-packet:
+        type: boolean
+        description:
+          Indicates that the hardware supports waking up via magic packet.
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: sifive,fu540-c000-gem
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    macb0: ethernet@fffc4000 {
+            compatible = "cdns,macb";
+            reg = <0xfffc4000 0x4000>;
+            interrupts = <21>;
+            phy-mode = "rmii";
+            local-mac-address = [3a 0e 03 04 05 06];
+            clock-names = "pclk", "hclk", "tx_clk";
+            clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                    reg = <0x1>;
+                    reset-gpios = <&pioE 6 1>;
+            };
+    };
+
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            gem1: ethernet@ff0c0000 {
+                    compatible = "xlnx,zynqmp-gem", "cdns,gem";
+                    interrupt-parent = <&gic>;
+                    interrupts = <0 59 4>, <0 59 4>;
+                    reg = <0x0 0xff0c0000 0x0 0x1000>;
+                    clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+                             <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+                             <&zynqmp_clk GEM_TSU>;
+                    clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    iommus = <&smmu 0x875>;
+                    power-domains = <&zynqmp_firmware PD_ETH_1>;
+                    resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+                    reset-names = "gem1_rst";
+                    status = "okay";
+                    phy-mode = "sgmii";
+                    phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
+                    fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
deleted file mode 100644
index 6c559981d110..000000000000
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Cortina Systems Gemini Ethernet Controller
-==========================================
-
-This ethernet controller is found in the Gemini SoC family:
-StorLink SL3512 and SL3516, also known as Cortina Systems
-CS3512 and CS3516.
-
-Required properties:
-- compatible: must be "cortina,gemini-ethernet"
-- reg: must contain the global registers and the V-bit and A-bit
-  memory areas, in total three register sets.
-- syscon: a phandle to the system controller
-- #address-cells: must be specified, must be <1>
-- #size-cells: must be specified, must be <1>
-- ranges: should be state like this giving a 1:1 address translation
-  for the subnodes
-
-The subnodes represents the two ethernet ports in this device.
-They are not independent of each other since they share resources
-in the parent node, and are thus children.
-
-Required subnodes:
-- port0: contains the resources for ethernet port 0
-- port1: contains the resources for ethernet port 1
-
-Required subnode properties:
-- compatible: must be "cortina,gemini-ethernet-port"
-- reg: must contain two register areas: the DMA/TOE memory and
-  the GMAC memory area of the port
-- interrupts: should contain the interrupt line of the port.
-  this is nominally a level interrupt active high.
-- resets: this must provide an SoC-integrated reset line for
-  the port.
-- clocks: this should contain a handle to the PCLK clock for
-  clocking the silicon in this port
-- clock-names: must be "PCLK"
-
-Optional subnode properties:
-- phy-mode: see ethernet.txt
-- phy-handle: see ethernet.txt
-
-Example:
-
-mdio-bus {
-	(...)
-	phy0: ethernet-phy@1 {
-		reg = <1>;
-		device_type = "ethernet-phy";
-	};
-	phy1: ethernet-phy@3 {
-		reg = <3>;
-		device_type = "ethernet-phy";
-	};
-};
-
-
-ethernet@60000000 {
-	compatible = "cortina,gemini-ethernet";
-	reg = <0x60000000 0x4000>, /* Global registers, queue */
-	      <0x60004000 0x2000>, /* V-bit */
-	      <0x60006000 0x2000>; /* A-bit */
-	syscon = <&syscon>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	gmac0: ethernet-port@0 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-		      <0x6000a000 0x2000>; /* Port 0 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC0>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy0>;
-	};
-
-	gmac1: ethernet-port@1 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-		      <0x6000e000 0x2000>; /* Port 1 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC1>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
new file mode 100644
index 000000000000..253b5d1407ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini Ethernet Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This ethernet controller is found in the Gemini SoC family:
+  StorLink SL3512 and SL3516, also known as Cortina Systems
+  CS3512 and CS3516.
+
+properties:
+  compatible:
+    const: cortina,gemini-ethernet
+
+  reg:
+    minItems: 3
+    description: must contain the global registers and the V-bit and A-bit
+      memory areas, in total three register sets.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+#The subnodes represents the two ethernet ports in this device.
+#They are not independent of each other since they share resources
+#in the parent node, and are thus children.
+patternProperties:
+  "^ethernet-port@[0-9]+$":
+    type: object
+    unevaluatedProperties: false
+    description: contains the resources for ethernet port
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    properties:
+      compatible:
+        const: cortina,gemini-ethernet-port
+
+      reg:
+        items:
+          - description: DMA/TOE memory
+          - description: GMAC memory area of the port
+
+      interrupts:
+        maxItems: 1
+        description: should contain the interrupt line of the port.
+                     this is nominally a level interrupt active high.
+
+      resets:
+        maxItems: 1
+        description: this must provide an SoC-integrated reset line for the port.
+
+      clocks:
+        maxItems: 1
+        description: this should contain a handle to the PCLK clock for
+                     clocking the silicon in this port
+
+      clock-names:
+        const: PCLK
+
+    required:
+      - reg
+      - compatible
+      - interrupts
+      - resets
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    mdio0: mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      phy0: ethernet-phy@1 {
+        reg = <1>;
+        device_type = "ethernet-phy";
+      };
+      phy1: ethernet-phy@3 {
+        reg = <3>;
+        device_type = "ethernet-phy";
+      };
+    };
+
+
+    ethernet@60000000 {
+        compatible = "cortina,gemini-ethernet";
+        reg = <0x60000000 0x4000>, /* Global registers, queue */
+              <0x60004000 0x2000>, /* V-bit */
+              <0x60006000 0x2000>; /* A-bit */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        gmac0: ethernet-port@0 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                      <0x6000a000 0x2000>; /* Port 0 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC0>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy0>;
+        };
+
+        gmac1: ethernet-port@1 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                      <0x6000e000 0x2000>; /* Port 1 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC1>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 7c7ac5eb0313..ef655f386b2e 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -20,7 +20,7 @@ Required properties:
 - active_slave		: Specifies the slave to use for time stamping,
 			  ethtool and SIOCGMIIPHY
 - cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
-			  device. See also cpsw-phy-sel.txt for it's binding.
+			  device. See also cpsw-phy-sel.txt for its binding.
 			  Note that in legacy cases cpsw-phy-sel may be
 			  a child device instead of a phandle
 			  (DEPRECATED, use phys property instead).
diff --git a/Documentation/devicetree/bindings/net/davicom,dm9051.yaml b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
new file mode 100644
index 000000000000..52e852fef753
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9051.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9051 SPI Ethernet Controller
+
+maintainers:
+  - Joseph CHANG <josright123@gmail.com>
+
+description: |
+  The DM9051 is a fully integrated and cost-effective low pin count single
+  chip Fast Ethernet controller with a Serial Peripheral Interface (SPI).
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: davicom,dm9051
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 45000000
+
+  interrupts:
+    maxItems: 1
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  # Raspberry Pi platform
+  - |
+    /* for Raspberry Pi with pin control stuff for GPIO irq */
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "davicom,dm9051";
+            reg = <0>; /* spi chip select */
+            local-mac-address = [00 00 00 00 00 00];
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <31200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
index 320607cbbb17..f824fdae0da2 100644
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -76,7 +76,6 @@ eth1: ethernet@1a000000 {
 
 				switch_port0: port@0 {
 					reg = <0x0>;
-					label = "cpu";
 					ethernet = <&eth1>;
 
 					phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
index 3f01b65f3b22..259a0c6547f3 100644
--- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -61,8 +61,9 @@ examples:
                 };
                 ethernet-port@3 {
                     reg = <3>;
-                    label = "cpu";
                     ethernet = <&fec1>;
+                    phy-mode = "rgmii-id";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index c3c938893ad9..1219b830b1a4 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Broadcom BCM53xx Ethernet switches
 
-allOf:
-  - $ref: dsa.yaml#
-
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
 
@@ -68,53 +65,71 @@ required:
   - compatible
   - reg
 
-# BCM585xx/586xx/88312 SoCs
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - brcm,bcm58522-srab
-          - brcm,bcm58523-srab
-          - brcm,bcm58525-srab
-          - brcm,bcm58622-srab
-          - brcm,bcm58623-srab
-          - brcm,bcm58625-srab
-          - brcm,bcm88312-srab
-then:
-  properties:
-    reg:
-      minItems: 3
-      maxItems: 3
-    reg-names:
-      items:
-        - const: srab
-        - const: mux_config
-        - const: sgmii_config
-    interrupts:
-      minItems: 13
-      maxItems: 13
-    interrupt-names:
-      items:
-        - const: link_state_p0
-        - const: link_state_p1
-        - const: link_state_p2
-        - const: link_state_p3
-        - const: link_state_p4
-        - const: link_state_p5
-        - const: link_state_p7
-        - const: link_state_p8
-        - const: phy
-        - const: ts
-        - const: imp_sleep_timer_p5
-        - const: imp_sleep_timer_p7
-        - const: imp_sleep_timer_p8
-  required:
-    - interrupts
-else:
-  properties:
-    reg:
-      maxItems: 1
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm5325
+              - brcm,bcm53115
+              - brcm,bcm53125
+              - brcm,bcm53128
+              - brcm,bcm5365
+              - brcm,bcm5395
+              - brcm,bcm5397
+              - brcm,bcm5398
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+    # BCM585xx/586xx/88312 SoCs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          items:
+            - const: srab
+            - const: mux_config
+            - const: sgmii_config
+        interrupts:
+          minItems: 13
+          maxItems: 13
+        interrupt-names:
+          items:
+            - const: link_state_p0
+            - const: link_state_p1
+            - const: link_state_p2
+            - const: link_state_p3
+            - const: link_state_p4
+            - const: link_state_p5
+            - const: link_state_p7
+            - const: link_state_p8
+            - const: phy
+            - const: ts
+            - const: imp_sleep_timer_p5
+            - const: imp_sleep_timer_p7
+            - const: imp_sleep_timer_p8
+      required:
+        - interrupts
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 unevaluatedProperties: false
 
@@ -154,7 +169,6 @@ examples:
 
                 port@8 {
                     reg = <8>;
-                    label = "cpu";
                     phy-mode = "rgmii-txid";
                     ethernet = <&eth0>;
                     fixed-link {
@@ -237,8 +251,9 @@ examples:
 
                 port@8 {
                     ethernet = <&amac2>;
-                    label = "cpu";
                     reg = <8>;
+                    phy-mode = "internal";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index 702df848a71d..10ad7e71097b 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -15,7 +15,7 @@ description:
   Ethernet switch port Description
 
 allOf:
-  - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#"
+  - $ref: /schemas/net/ethernet-controller.yaml#
 
 properties:
   reg:
@@ -34,6 +34,8 @@ properties:
       full routing information must be given, not just the one hop
       routes to neighbouring switches
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
 
   ethernet:
     description:
@@ -51,6 +53,8 @@ properties:
       - edsa
       - ocelot
       - ocelot-8021q
+      - rtl8_4
+      - rtl8_4t
       - seville
 
   phy-handle: true
@@ -72,6 +76,23 @@ properties:
 required:
   - reg
 
+# CPU and DSA ports must have phylink-compatible link descriptions
+if:
+  oneOf:
+    - required: [ ethernet ]
+    - required: [ link ]
+then:
+  allOf:
+    - required:
+        - phy-mode
+    - oneOf:
+        - required:
+            - fixed-link
+        - required:
+            - phy-handle
+        - required:
+            - managed
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
index 5592f58fa6f0..73b774eadd0b 100644
--- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -48,7 +48,7 @@ properties:
       "^led@[01]$":
         type: object
         description: Hellcreek leds
-        $ref: ../../leds/common.yaml#
+        $ref: /schemas/leds/common.yaml#
 
         properties:
           reg:
@@ -91,8 +91,13 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
+                    phy-mode = "mii";
+
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
                 };
 
                 port@2 {
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 464d6bf87605..46a732087f5c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -46,7 +46,6 @@ I2C managed mode:
 
 			port@0 { /* RMII fixed link to master */
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&master>;
 			};
 
@@ -83,7 +82,6 @@ MDIO managed mode:
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
 						ethernet = <&master>;
 					};
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index e3829d3e480e..8bb1eff21cb1 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -96,7 +96,6 @@ switch@e108000 {
 
 		port@6 {
 			reg = <0x6>;
-			label = "cpu";
 			ethernet = <&eth0>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
new file mode 100644
index 000000000000..f2e9ff3f580b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -0,0 +1,804 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7530 and MT7531 Ethernet Switches
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Landen Chao <Landen.Chao@mediatek.com>
+  - DENG Qingfang <dqfext@gmail.com>
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  There are two versions of MT7530, standalone and in a multi-chip module.
+
+  MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
+  MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
+
+  MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+  and the switch registers are directly mapped into SoC's memory map rather than
+  using MDIO. The DSA driver currently doesn't support this.
+
+  There is only the standalone version of MT7531.
+
+  Port 5 on MT7530 has got various ways of configuration.
+
+  For standalone MT7530:
+
+    - Port 5 can be used as a CPU port.
+
+    - PHY 0 or 4 of the switch can be muxed to connect to the gmac of the SoC
+      which port 5 is wired to. Usually used for connecting the wan port
+      directly to the CPU to achieve 2 Gbps routing in total.
+
+      The driver looks up the reg on the ethernet-phy node which the phy-handle
+      property refers to on the gmac node to mux the specified phy.
+
+      The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the
+      compatible string and the reg must be 1. So, for now, only gmac1 of an
+      MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this.
+      Check out example 5 for a similar configuration.
+
+    - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave.
+      Check out example 7 for a similar configuration.
+
+  For multi-chip module MT7530:
+
+    - Port 5 can be used as a CPU port.
+
+    - PHY 0 or 4 of the switch can be muxed to connect to gmac1 of the SoC.
+      Usually used for connecting the wan port directly to the CPU to achieve 2
+      Gbps routing in total.
+
+      The driver looks up the reg on the ethernet-phy node which the phy-handle
+      property refers to on the gmac node to mux the specified phy.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+      Check out example 5.
+
+    - In case of an external phy wired to gmac1 of the SoC, port 5 must not be
+      enabled.
+
+      In case of muxing PHY 0 or 4, the external phy must not be enabled.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+      Check out example 6.
+
+    - Port 5 can be muxed to an external phy. Port 5 becomes a DSA slave.
+      The external phy must be wired TX to TX to gmac1 of the SoC for this to
+      work. Ubiquiti EdgeRouter X SFP is wired this way.
+
+      Muxing PHY 0 or 4 won't work when the external phy is connected TX to TX.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with gpio function.
+      Check out example 7.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC
+        const: mediatek,mt7530
+
+      - description:
+          Standalone MT7531
+        const: mediatek,mt7531
+
+      - description:
+          Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+        const: mediatek,mt7621
+
+  reg:
+    maxItems: 1
+
+  core-supply:
+    description:
+      Phandle to the regulator node necessary for the core power.
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller:
+    type: boolean
+    description:
+      If defined, LED controller of the MT7530 switch will run on GPIO mode.
+
+      There are 15 controllable pins.
+      port 0 LED 0..2 as GPIO 0..2
+      port 1 LED 0..2 as GPIO 3..5
+      port 2 LED 0..2 as GPIO 6..8
+      port 3 LED 0..2 as GPIO 9..11
+      port 4 LED 0..2 as GPIO 12..14
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  io-supply:
+    description:
+      Phandle to the regulator node necessary for the I/O power.
+      See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
+      details for the regulator setup on these boards.
+
+  mediatek,mcm:
+    type: boolean
+    description:
+      Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
+      switch is a part of the multi-chip module.
+
+  reset-gpios:
+    description:
+      GPIO to reset the switch. Use this if mediatek,mcm is not used.
+      This property is optional because some boards share the reset line with
+      other components which makes it impossible to probe the switch if the
+      reset line is used.
+    maxItems: 1
+
+  reset-names:
+    const: mcm
+
+  resets:
+    description:
+      Phandle pointing to the system reset controller with line index for the
+      ethsys.
+    maxItems: 1
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+        description: Ethernet switch ports
+
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description:
+              Port address described must be 5 or 6 for CPU port and from 0 to 5
+              for user ports.
+
+        allOf:
+          - $ref: dsa-port.yaml#
+          - if:
+              required: [ ethernet ]
+            then:
+              properties:
+                reg:
+                  enum:
+                    - 5
+                    - 6
+
+required:
+  - compatible
+  - reg
+
+$defs:
+  mt7530-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - gmii
+                      - mii
+                      - rgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - rgmii
+                      - trgmii
+
+  mt7531-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - rgmii
+                      - sgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - sgmii
+
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      required:
+        - mediatek,mcm
+    then:
+      properties:
+        reset-gpios: false
+
+      required:
+        - resets
+        - reset-names
+
+  - dependencies:
+      interrupt-controller: [ interrupts ]
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7530
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - core-supply
+        - io-supply
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7531
+    then:
+      $ref: "#/$defs/mt7531-dsa-port"
+      properties:
+        gpio-controller: false
+        mediatek,mcm: false
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7621
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - mediatek,mcm
+
+unevaluatedProperties: false
+
+examples:
+  # Example 1: Standalone MT7530
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            reset-gpios = <&pio 33 0>;
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 2: MT7530 in MT7623AI SoC
+  - |
+    #include <dt-bindings/reset/mt2701-resets.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+            reset-names = "mcm";
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 3: Standalone MT7531
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@0 {
+            compatible = "mediatek,mt7531";
+            reg = <0>;
+
+            reset-gpios = <&pio 54 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&pio>;
+            interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "2500base-x";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7621";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&sysc MT7621_RST_MCM>;
+            reset-names = "mcm";
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example5_ethphy4>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* MT7530's phy4 */
+            example5_ethphy4: ethernet-phy@4 {
+                reg = <4>;
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    /* Commented out, phy4 is muxed to gmac1.
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+                    */
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 6: MT7621: mux external phy to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example6_ethphy7>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example6_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 7: MT7621: mux external phy to MT7530's port 5
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example7_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@5 {
+                        reg = <5>;
+                        label = "extphy";
+                        phy-mode = "rgmii-txid";
+                        phy-handle = <&example7_ethphy7>;
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 84985f53bffd..4da75b1f9533 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: dsa.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
@@ -42,6 +43,12 @@ properties:
     description:
       Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
 
+  microchip,synclko-disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO clock should be disabled. Do not mix with
+      microchip,synclko-125.
+
 required:
   - compatible
   - reg
@@ -100,8 +107,9 @@ examples:
                 };
                 port@5 {
                     reg = <5>;
-                    label = "cpu";
                     ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
@@ -137,8 +145,9 @@ examples:
                 };
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
new file mode 100644
index 000000000000..630bf0f8294b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LAN937x Ethernet Switch Series Tree Bindings
+
+maintainers:
+  - UNGLinuxDriver@microchip.com
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9370
+      - microchip,lan9371
+      - microchip,lan9372
+      - microchip,lan9373
+      - microchip,lan9374
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  reset-gpios:
+    description: Optional gpio specifier for a reset line
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-id
+                      - rgmii-txid
+                      - rgmii-rxid
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+                tx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    macb0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fixed-link {
+                    speed = <1000>;
+                    full-duplex;
+            };
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            lan9374: switch@0 {
+                    compatible = "microchip,lan9374";
+                    reg = <0>;
+                    spi-max-frequency = <44000000>;
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan1";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan2";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy1>;
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan4";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy2>;
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan6";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy3>;
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+                                    ethernet = <&macb0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@5 {
+                                    reg = <5>;
+                                    label = "lan7";
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@6 {
+                                    reg = <6>;
+                                    label = "lan5";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy6>;
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    label = "lan3";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy7>;
+                            };
+                    };
+
+                    mdio {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            t1phy0: ethernet-phy@0{
+                                    reg = <0x0>;
+                            };
+
+                            t1phy1: ethernet-phy@1{
+                                    reg = <0x1>;
+                            };
+
+                            t1phy2: ethernet-phy@2{
+                                    reg = <0x2>;
+                            };
+
+                            t1phy3: ethernet-phy@3{
+                                    reg = <0x3>;
+                            };
+
+                            t1phy6: ethernet-phy@6{
+                                    reg = <0x6>;
+                            };
+
+                            t1phy7: ethernet-phy@7{
+                                    reg = <0x7>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
new file mode 100644
index 000000000000..8d93ed9c172c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Ocelot Switch Family Device Tree Bindings
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  There are multiple switches which are either part of the Ocelot-1 family, or
+  derivatives of this architecture. These switches can be found embedded in
+  various SoCs and accessed using MMIO, or as discrete chips and accessed over
+  SPI or PCIe. The present DSA binding shall be used when the host controlling
+  them performs packet I/O primarily through an Ethernet port of the switch
+  (which is attached to an Ethernet port of the host), rather than through
+  Frame DMA or register-based I/O.
+
+  VSC9953 (Seville):
+
+    This is found in the NXP T1040, where it is a memory-mapped platform
+    device.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 8 and 9
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7
+
+  VSC9959 (Felix):
+
+    This is found in the NXP LS1028A. It is a PCI device, part of the larger
+    enetc root complex. As a result, the ethernet-switch node is a sub-node of
+    the PCIe root complex node and its "reg" property conforms to the parent
+    node bindings, describing it as PF 5 of device 0, bus 0.
+
+    If any external switch port is enabled, the enetc PF2 (enetc_port2) should
+    be enabled as well. This is because the internal MDIO bus (exposed through
+    EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc
+    port 2 and not to Felix.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 4 and 5
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3
+      - phy-mode = "usxgmii": on ports 0, 1, 2, 3
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3
+      - phy-mode = "2500base-x": on ports 0, 1, 2, 3
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc9953-switch
+      - pci1957,eef0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description:
+      Used to signal availability of PTP TX timestamps, and state changes of
+      the MAC merge layer of ports that support Frame Preemption.
+
+  little-endian: true
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dsa.yaml#
+  - if:
+      properties:
+        compatible:
+          const: pci1957,eef0
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  # Felix VSC9959 (NXP LS1028A)
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie { /* Integrated Endpoint Root Complex */
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        ethernet-switch@0,5 {
+            compatible = "pci1957,eef0";
+            reg = <0x000500 0 0 0 0>;
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    ethernet = <&enetc_port2>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    ethernet = <&enetc_port3>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+  # Seville VSC9953 (NXP T1040)
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ethernet-switch@800000 {
+            compatible = "mscc,vsc9953-switch";
+            reg = <0x800000 0x290000>;
+            little-endian;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy4>;
+                    managed = "in-band-status";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy5>;
+                    managed = "in-band-status";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy6>;
+                    managed = "in-band-status";
+                };
+
+                port@7 {
+                    reg = <7>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy7>;
+                    managed = "in-band-status";
+                };
+
+                port@8 {
+                    reg = <8>;
+                    phy-mode = "internal";
+                    ethernet = <&enet0>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@9 {
+                    reg = <9>;
+                    phy-mode = "internal";
+                    ethernet = <&enet1>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
deleted file mode 100644
index 18247ebfc487..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ /dev/null
@@ -1,327 +0,0 @@
-Mediatek MT7530 Ethernet switch
-================================
-
-Required properties:
-
-- compatible: may be compatible = "mediatek,mt7530"
-	or compatible = "mediatek,mt7621"
-	or compatible = "mediatek,mt7531"
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
-	on multi-chip module belong to MT7623A has or the remotely standalone
-	chip as the function MT7623N reference board provided for.
-
-If compatible mediatek,mt7530 is set then the following properties are required
-
-- core-supply: Phandle to the regulator node necessary for the core power.
-- io-supply: Phandle to the regulator node necessary for the I/O power.
-	See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
-	for details for the regulator setup on these boards.
-
-If the property mediatek,mcm isn't defined, following property is required
-
-- reset-gpios: Should be a gpio specifier for a reset line.
-
-Else, following properties are required
-
-- resets : Phandle pointing to the system reset controller with
-	line index for the ethsys.
-- reset-names : Should be set to "mcm".
-
-Required properties for the child nodes within ports container:
-
-- reg: Port address described must be 6 for CPU port and from 0 to 5 for
-	user ports.
-- phy-mode: String, the following values are acceptable for port labeled
-	"cpu":
-	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
-	must be either "trgmii" or "rgmii"
-	If compatible mediatek,mt7531 is set,
-	must be either "sgmii", "1000base-x" or "2500base-x"
-
-Port 5 of mt7530 and mt7621 switch is muxed between:
-1. GMAC5: GMAC5 can interface with another external MAC or PHY.
-2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
-   of the SOC. Used in many setups where port 0/4 becomes the WAN port.
-   Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to
-	 GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not
-	 connected to external component!
-
-Port 5 modes/configurations:
-1. Port 5 is disabled and isolated: An external phy can interface to the 2nd
-   GMAC of the SOC.
-   In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd
-   GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC!
-2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC.
-   It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode
-   and RGMII delay.
-3. Port 5 is muxed to GMAC5 and can interface to an external phy.
-   Port 5 becomes an extra switch port.
-   Only works on platform where external phy TX<->RX lines are swapped.
-   Like in the Ubiquiti ER-X-SFP.
-4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port.
-   Currently a 2nd CPU port is not supported by DSA code.
-
-Depending on how the external PHY is wired:
-1. normal: The PHY can only connect to 2nd GMAC but not to the switch
-2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as
-   a ethernet port. But can't interface to the 2nd GMAC.
-
-Based on the DT the port 5 mode is configured.
-
-Driver tries to lookup the phy-handle of the 2nd GMAC of the master device.
-When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2.
-phy-mode must be set, see also example 2 below!
- * mt7621: phy-mode = "rgmii-txid";
- * mt7623: phy-mode = "rgmii";
-
-Optional properties:
-
-- gpio-controller: Boolean; if defined, MT7530's LED controller will run on
-	GPIO mode.
-- #gpio-cells: Must be 2 if gpio-controller is defined.
-- interrupt-controller: Boolean; Enables the internal interrupt controller.
-
-If interrupt-controller is defined, the following properties are required.
-
-- #interrupt-cells: Must be 1.
-- interrupts: Parent interrupt for the interrupt controller.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required, optional properties and how the integrated switch subnodes must
-be specified.
-
-Example:
-
-	&mdio0 {
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-			reset-gpios = <&pio 33 0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-
-Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
-
-&eth {
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "rgmii-txid";
-		phy-handle = <&phy4>;
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Internal phy */
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-		};
-
-		mt7530: switch@1f {
-			compatible = "mediatek,mt7621";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f>;
-			pinctrl-names = "default";
-			mediatek,mcm;
-
-			resets = <&rstctrl 2>;
-			reset-names = "mcm";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-/* Commented out. Port 4 is handled by 2nd GMAC.
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-*/
-
-				cpu_port0: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
-
-Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
-
-&eth {
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External phy */
-		ephy5: ethernet-phy@7 {
-			reg = <7>;
-		};
-
-		mt7530: switch@1f {
-			compatible = "mediatek,mt7621";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f>;
-			pinctrl-names = "default";
-			mediatek,mcm;
-
-			resets = <&rstctrl 2>;
-			reset-names = "mcm";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "lan5";
-					phy-mode = "rgmii";
-					phy-handle = <&ephy5>;
-				};
-
-				cpu_port0: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 24cd733c11d1..1e26d876d146 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -14,6 +14,7 @@ description:
 
 allOf:
   - $ref: "dsa.yaml#"
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 maintainers:
   - Vladimir Oltean <vladimir.oltean@nxp.com>
@@ -52,10 +53,8 @@ properties:
 
     patternProperties:
       "^mdio@[0-1]$":
-        type: object
-
-        allOf:
-          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
+        $ref: /schemas/net/mdio.yaml#
+        unevaluatedProperties: false
 
         properties:
           compatible:
diff --git a/Documentation/devicetree/bindings/net/dsa/ocelot.txt b/Documentation/devicetree/bindings/net/dsa/ocelot.txt
deleted file mode 100644
index 7a271d070b72..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ocelot.txt
+++ /dev/null
@@ -1,213 +0,0 @@
-Microchip Ocelot switch driver family
-=====================================
-
-Felix
------
-
-Currently the switches supported by the felix driver are:
-
-- VSC9959 (Felix)
-- VSC9953 (Seville)
-
-The VSC9959 switch is found in the NXP LS1028A. It is a PCI device, part of the
-larger ENETC root complex. As a result, the ethernet-switch node is a sub-node
-of the PCIe root complex node and its "reg" property conforms to the parent
-node bindings:
-
-* reg: Specifies PCIe Device Number and Function Number of the endpoint device,
-  in this case for the Ethernet L2Switch it is PF5 (of device 0, bus 0).
-
-It does not require a "compatible" string.
-
-The interrupt line is used to signal availability of PTP TX timestamps and for
-TSN frame preemption.
-
-For the external switch ports, depending on board configuration, "phy-mode" and
-"phy-handle" are populated by board specific device tree instances. Ports 4 and
-5 are fixed as internal ports in the NXP LS1028A instantiation.
-
-The CPU port property ("ethernet") configures the feature called "NPI port" in
-the Ocelot hardware core. The CPU port in Ocelot is a set of queues, which are
-connected, in the Node Processor Interface (NPI) mode, to an Ethernet port.
-By default, in fsl-ls1028a.dtsi, the NPI port is assigned to the internal
-2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific
-use case.  Moving the NPI port to an external switch port is hardware possible,
-but there is no platform support for the Linux system on the LS1028A chip to
-operate as an entire slave DSA chip.  NPI functionality (and therefore DSA
-tagging) is supported on a single port at a time.
-
-Any port can be disabled (and in fsl-ls1028a.dtsi, they are indeed all disabled
-by default, and should be enabled on a per-board basis). But if any external
-switch port is enabled at all, the ENETC PF2 (enetc_port2) should be enabled as
-well, regardless of whether it is configured as the DSA master or not. This is
-because the Felix PHYLINK implementation accesses the MAC PCS registers, which
-in hardware truly belong to the ENETC port #2 and not to Felix.
-
-Supported PHY interface types (appropriate SerDes protocol setting changes are
-needed in the RCW binary):
-
-* phy_mode = "internal": on ports 4 and 5
-* phy_mode = "sgmii": on ports 0, 1, 2, 3
-* phy_mode = "qsgmii": on ports 0, 1, 2, 3
-* phy_mode = "usxgmii": on ports 0, 1, 2, 3
-* phy_mode = "2500base-x": on ports 0, 1, 2, 3
-
-For the rest of the device tree binding definitions, which are standard DSA and
-PCI, refer to the following documents:
-
-Documentation/devicetree/bindings/net/dsa/dsa.txt
-Documentation/devicetree/bindings/pci/pci.txt
-
-Example:
-
-&soc {
-	pcie@1f0000000 { /* Integrated Endpoint Root Complex */
-		ethernet-switch@0,5 {
-			reg = <0x000500 0 0 0 0>;
-			/* IEP INT_B */
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* External ports */
-				port@0 {
-					reg = <0>;
-					label = "swp0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "swp1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "swp2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "swp3";
-				};
-
-				/* Tagging CPU port */
-				port@4 {
-					reg = <4>;
-					ethernet = <&enetc_port2>;
-					phy-mode = "internal";
-
-					fixed-link {
-						speed = <2500>;
-						full-duplex;
-					};
-				};
-
-				/* Non-tagging CPU port */
-				port@5 {
-					reg = <5>;
-					phy-mode = "internal";
-					status = "disabled";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-The VSC9953 switch is found inside NXP T1040. It is a platform device with the
-following required properties:
-
-- compatible:
-	Must be "mscc,vsc9953-switch".
-
-Supported PHY interface types (appropriate SerDes protocol setting changes are
-needed in the RCW binary):
-
-* phy_mode = "internal": on ports 8 and 9
-* phy_mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
-* phy_mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
-
-Example:
-
-&soc {
-	ethernet-switch@800000 {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "mscc,vsc9953-switch";
-		little-endian;
-		reg = <0x800000 0x290000>;
-
-		ports {
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-
-			port@0 {
-				reg = <0x0>;
-				label = "swp0";
-			};
-
-			port@1 {
-				reg = <0x1>;
-				label = "swp1";
-			};
-
-			port@2 {
-				reg = <0x2>;
-				label = "swp2";
-			};
-
-			port@3 {
-				reg = <0x3>;
-				label = "swp3";
-			};
-
-			port@4 {
-				reg = <0x4>;
-				label = "swp4";
-			};
-
-			port@5 {
-				reg = <0x5>;
-				label = "swp5";
-			};
-
-			port@6 {
-				reg = <0x6>;
-				label = "swp6";
-			};
-
-			port@7 {
-				reg = <0x7>;
-				label = "swp7";
-			};
-
-			port@8 {
-				reg = <0x8>;
-				phy-mode = "internal";
-				ethernet = <&enet0>;
-
-				fixed-link {
-					speed = <2500>;
-					full-duplex;
-				};
-			};
-
-			port@9 {
-				reg = <0x9>;
-				phy-mode = "internal";
-				status = "disabled";
-
-				fixed-link {
-					speed = <2500>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
index 89c21b289447..978162df51f7 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -58,33 +58,14 @@ properties:
       B68 on the QCA832x and B49 on the QCA833x.
 
   mdio:
-    type: object
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
     description: Qca8k switch have an internal mdio to access switch port.
                  If this is not present, the legacy mapping is used and the
                  internal mdio access is used.
                  With the legacy mapping the reg corresponding to the internal
                  mdio is the switch reg with an offset of -1.
 
-    properties:
-      '#address-cells':
-        const: 1
-      '#size-cells':
-        const: 0
-
-    patternProperties:
-      "^(ethernet-)?phy@[0-4]$":
-        type: object
-
-        allOf:
-          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
-
-        properties:
-          reg:
-            maxItems: 1
-
-        required:
-          - reg
-
 patternProperties:
   "^(ethernet-)?ports$":
     type: object
@@ -178,7 +159,6 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "rgmii";
 
@@ -240,7 +220,6 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "rgmii";
 
@@ -287,7 +266,6 @@ examples:
 
                 port@6 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac1>;
                     phy-mode = "sgmii";
 
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
deleted file mode 100644
index 7959ec237983..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+++ /dev/null
@@ -1,240 +0,0 @@
-Realtek SMI-based Switches
-==========================
-
-The SMI "Simple Management Interface" is a two-wire protocol using
-bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
-not use the MDIO protocol. This binding defines how to specify the
-SMI-based Realtek devices.
-
-Required properties:
-
-- compatible: must be exactly one of:
-      "realtek,rtl8365mb" (4+1 ports)
-      "realtek,rtl8366"
-      "realtek,rtl8366rb" (4+1 ports)
-      "realtek,rtl8366s"  (4+1 ports)
-      "realtek,rtl8367"
-      "realtek,rtl8367b"
-      "realtek,rtl8368s"  (8 port)
-      "realtek,rtl8369"
-      "realtek,rtl8370"   (8 port)
-
-Required properties:
-- mdc-gpios: GPIO line for the MDC clock line.
-- mdio-gpios: GPIO line for the MDIO data line.
-- reset-gpios: GPIO line for the reset signal.
-
-Optional properties:
-- realtek,disable-leds: if the LED drivers are not used in the
-  hardware design this will disable them so they are not turned on
-  and wasting power.
-
-Required subnodes:
-
-- interrupt-controller
-
-  This defines an interrupt controller with an IRQ line (typically
-  a GPIO) that will demultiplex and handle the interrupt from the single
-  interrupt line coming out of one of the SMI-based chips. It most
-  importantly provides link up/down interrupts to the PHY blocks inside
-  the ASIC.
-
-Required properties of interrupt-controller:
-
-- interrupt: parent interrupt, see interrupt-controller/interrupts.txt
-- interrupt-controller: see interrupt-controller/interrupts.txt
-- #address-cells: should be <0>
-- #interrupt-cells: should be <1>
-
-- mdio
-
-  This defines the internal MDIO bus of the SMI device, mostly for the
-  purpose of being able to hook the interrupts to the right PHY and
-  the right PHY to the corresponding port.
-
-Required properties of mdio:
-
-- compatible: should be set to "realtek,smi-mdio" for all SMI devices
-
-See net/mdio.txt for additional MDIO bus properties.
-
-See net/dsa/dsa.txt for a list of additional required and optional properties
-and subnodes of DSA switches.
-
-Examples:
-
-An example for the RTL8366RB:
-
-switch {
-	compatible = "realtek,rtl8366rb";
-	/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
-	mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-	mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-	reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-
-	switch_intc: interrupt-controller {
-		/* GPIO 15 provides the interrupt */
-		interrupt-parent = <&gpio0>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		port@0 {
-			reg = <0>;
-			label = "lan0";
-			phy-handle = <&phy0>;
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan1";
-			phy-handle = <&phy1>;
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-			phy-handle = <&phy2>;
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan3";
-			phy-handle = <&phy3>;
-		};
-		port@4 {
-			reg = <4>;
-			label = "wan";
-			phy-handle = <&phy4>;
-		};
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-
-	mdio {
-		compatible = "realtek,smi-mdio", "dsa-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: phy@0 {
-			reg = <0>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <0>;
-		};
-		phy1: phy@1 {
-			reg = <1>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <1>;
-		};
-		phy2: phy@2 {
-			reg = <2>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <2>;
-		};
-		phy3: phy@3 {
-			reg = <3>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <3>;
-		};
-		phy4: phy@4 {
-			reg = <4>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <12>;
-		};
-	};
-};
-
-An example for the RTL8365MB-VC:
-
-switch {
-	compatible = "realtek,rtl8365mb";
-	mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
-	mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-	reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-
-	switch_intc: interrupt-controller {
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		port@0 {
-			reg = <0>;
-			label = "swp0";
-			phy-handle = <&ethphy0>;
-		};
-		port@1 {
-			reg = <1>;
-			label = "swp1";
-			phy-handle = <&ethphy1>;
-		};
-		port@2 {
-			reg = <2>;
-			label = "swp2";
-			phy-handle = <&ethphy2>;
-		};
-		port@3 {
-			reg = <3>;
-			label = "swp3";
-			phy-handle = <&ethphy3>;
-		};
-		port@6 {
-			reg = <6>;
-			label = "cpu";
-			ethernet = <&fec1>;
-			phy-mode = "rgmii";
-			tx-internal-delay-ps = <2000>;
-			rx-internal-delay-ps = <2000>;
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-				pause;
-			};
-		};
-	};
-
-	mdio {
-		compatible = "realtek,smi-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: phy@0 {
-			reg = <0>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <0>;
-		};
-		ethphy1: phy@1 {
-			reg = <1>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <1>;
-		};
-		ethphy2: phy@2 {
-			reg = <2>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <2>;
-		};
-		ethphy3: phy@3 {
-			reg = <3>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <3>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
new file mode 100644
index 000000000000..1a7d45a8ad66
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -0,0 +1,386 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/realtek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek switches for unmanaged switches
+
+allOf:
+  - $ref: dsa.yaml#
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Realtek advertises these chips as fast/gigabit switches or unmanaged
+  switches. They can be controlled using different interfaces, like SMI,
+  MDIO or SPI.
+
+  The SMI "Simple Management Interface" is a two-wire protocol using
+  bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
+  not use the MDIO protocol. This binding defines how to specify the
+  SMI-based Realtek devices. The realtek-smi driver is a platform driver
+  and it must be inserted inside a platform node.
+
+  The MDIO-connected switches use MDIO protocol to access their registers.
+  The realtek-mdio driver is an MDIO driver and it must be inserted inside
+  an MDIO node.
+
+  The compatible string is only used to identify which (silicon) family the
+  switch belongs to. Roughly speaking, a family is any set of Realtek switches
+  whose chip identification register(s) have a common location and semantics.
+  The different models in a given family can be automatically disambiguated by
+  parsing the chip identification register(s) according to the given family,
+  avoiding the need for a unique compatible string for each model.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8365mb
+      - realtek,rtl8366rb
+    description: |
+      realtek,rtl8365mb:
+        Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB,
+        RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S,
+        RTL8367SB, RTL8370MB, RTL8310SR
+      realtek,rtl8366rb:
+        Use with models RTL8366RB, RTL8366S
+
+  mdc-gpios:
+    description: GPIO line for the MDC clock line.
+    maxItems: 1
+
+  mdio-gpios:
+    description: GPIO line for the MDIO data line.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+  realtek,disable-leds:
+    type: boolean
+    description: |
+      if the LED drivers are not used in the hardware design,
+      this will disable them so they are not turned on
+      and wasting power.
+
+  interrupt-controller:
+    type: object
+    description: |
+      This defines an interrupt controller with an IRQ line (typically
+      a GPIO) that will demultiplex and handle the interrupt from the single
+      interrupt line coming out of one of the Realtek switch chips. It most
+      importantly provides link up/down interrupts to the PHY blocks inside
+      the ASIC.
+
+    properties:
+
+      interrupt-controller: true
+
+      interrupts:
+        maxItems: 1
+        description:
+          A single IRQ line from the switch, either active LOW or HIGH
+
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+    required:
+      - interrupt-controller
+      - '#address-cells'
+      - '#interrupt-cells'
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: realtek,smi-mdio
+
+if:
+  required:
+    - reg
+
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  not:
+    required:
+      - mdc-gpios
+      - mdio-gpios
+      - mdio
+
+  properties:
+    mdc-gpios: false
+    mdio-gpios: false
+    mdio: false
+
+else:
+  required:
+    - mdc-gpios
+    - mdio-gpios
+    - mdio
+    - reset-gpios
+
+required:
+  - compatible
+
+    #  - mdc-gpios
+    #  - mdio-gpios
+    #  - reset-gpios
+    #  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8366rb";
+                    /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+                    mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+                    switch_intc1: interrupt-controller {
+                            /* GPIO 15 provides the interrupt */
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan0";
+                                    phy-handle = <&phy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan1";
+                                    phy-handle = <&phy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                                    phy-handle = <&phy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan3";
+                                    phy-handle = <&phy3>;
+                            };
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                                    phy-handle = <&phy4>;
+                            };
+                            port@5 {
+                                    reg = <5>;
+                                    ethernet = <&gmac0>;
+                                    phy-mode = "rgmii";
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            phy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <0>;
+                            };
+                            phy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <1>;
+                            };
+                            phy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <2>;
+                            };
+                            phy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <3>;
+                            };
+                            phy4: ethernet-phy@4 {
+                                    reg = <4>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <12>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8365mb";
+                    mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+                    switch_intc2: interrupt-controller {
+                            interrupt-parent = <&gpio5>;
+                            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "swp0";
+                                    phy-handle = <&ethphy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "swp1";
+                                    phy-handle = <&ethphy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "swp2";
+                                    phy-handle = <&ethphy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "swp3";
+                                    phy-handle = <&ethphy3>;
+                            };
+                            port@6 {
+                                    reg = <6>;
+                                    ethernet = <&fec1>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                            pause;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            ethphy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <0>;
+                            };
+                            ethphy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <1>;
+                            };
+                            ethphy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <2>;
+                            };
+                            ethphy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <3>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch@29 {
+                    compatible = "realtek,rtl8365mb";
+                    reg = <29>;
+
+                    reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+
+                    switch_intc3: interrupt-controller {
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan4";
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan3";
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan1";
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    ethernet = <&ethernet>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+      };
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
new file mode 100644
index 000000000000..7ca9c19a157c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+  handles 4 ports + 1 CPU management port.
+
+allOf:
+  - $ref: dsa.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-a5psw
+      - const: renesas,rzn1-a5psw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Device Level Ring (DLR) interrupt
+      - description: Switch interrupt
+      - description: Parallel Redundancy Protocol (PRP) interrupt
+      - description: Integrated HUB module interrupt
+      - description: Receive Pattern Match interrupt
+
+  interrupt-names:
+    items:
+      - const: dlr
+      - const: switch
+      - const: prp
+      - const: hub
+      - const: ptrn
+
+  power-domains:
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    items:
+      - description: AHB clock used for the switch register interface
+      - description: Switch system clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: clk
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-4]$":
+        type: object
+        description: Ethernet switch ports
+
+        properties:
+          pcs-handle:
+            description:
+              phandle pointing to a PCS sub-node compatible with
+              renesas,rzn1-miic.yaml#
+            $ref: /schemas/types.yaml#/definitions/phandle
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    switch@44050000 {
+        compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+        reg = <0x44050000 0x10000>;
+        clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+        clock-names = "hclk", "clk";
+        power-domains = <&sysctrl>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "dlr", "switch", "prp", "hub", "ptrn";
+
+        dsa,member = <0 0>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                label = "lan0";
+                phy-handle = <&switch0phy3>;
+                pcs-handle = <&mii_conv4>;
+            };
+
+            port@1 {
+                reg = <1>;
+                label = "lan1";
+                phy-handle = <&switch0phy1>;
+                pcs-handle = <&mii_conv3>;
+            };
+
+            port@4 {
+                reg = <4>;
+                ethernet = <&gmac2>;
+                phy-mode = "internal";
+
+                fixed-link {
+                  speed = <1000>;
+                  full-duplex;
+                };
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+            reset-delay-us = <15>;
+            clock-frequency = <2500000>;
+
+            switch0phy1: ethernet-phy@1{
+                reg = <1>;
+            };
+
+            switch0phy3: ethernet-phy@3{
+                reg = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index bbf4a13f6d75..258bef483673 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -75,7 +75,6 @@ switch@0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac1>;
 			phy-mode = "rgmii";
 			fixed-link {
@@ -117,7 +116,6 @@ switch@2,0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&enet0>;
 			phy-mode = "rgmii";
 			fixed-link {
diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
deleted file mode 100644
index 05bd7dafce17..000000000000
--- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
-
-Required properties:
-- compatible: should be "rockchip,<name>-emac"
-   "rockchip,rk3036-emac": found on RK3036 SoCs
-   "rockchip,rk3066-emac": found on RK3066 SoCs
-   "rockchip,rk3188-emac": found on RK3188 SoCs
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- rockchip,grf: phandle to the syscon grf used to control speed and mode
-  for emac.
-- phy: see ethernet.txt file in the same directory.
-- phy-mode: see ethernet.txt file in the same directory.
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Clock handling:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "hclk" for the host clock needed to calculate and set
-  polling period of EMAC and "macref" for the reference clock needed to transfer
-  data to and from the phy.
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Examples:
-
-ethernet@10204000 {
-	compatible = "rockchip,rk3188-emac";
-	reg = <0xc0fc2000 0x3c>;
-	interrupts = <6>;
-	mac-address = [ 00 11 22 33 44 55 ];
-
-	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
-	clock-names = "hclk", "macref";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
-
-	rockchip,grf = <&grf>;
-
-	phy = <&phy0>;
-	phy-mode = "rmii";
-	phy-supply = <&vcc_rmii>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy0: ethernet-phy@0 {
-	      reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
index d0e1476e15b5..a6921e805e37 100644
--- a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
+++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
@@ -20,7 +20,26 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: txrx-1
+      - const: txrx-2
+      - const: txrx-3
+      - const: txrx-4
+      - const: txrx-5
+      - const: txrx-6
+      - const: txrx-7
+    description:
+      The main interrupt for basic MAC features and the first TX/RX queue pair
+      is named "mac". "txrx-[1-7]" are the interrupts for additional TX/RX
+      queue pairs.
+
+  dma-coherent: true
 
   local-mac-address: true
 
@@ -28,7 +47,7 @@ properties:
 
   nvmem-cells: true
 
-  nvmem-cells-names: true
+  nvmem-cell-names: true
 
   phy-connection-type:
     enum:
@@ -58,7 +77,7 @@ examples:
     axi {
         #address-cells = <2>;
         #size-cells = <2>;
-        tnsep0: ethernet@a0000000 {
+        tsnep0: ethernet@a0000000 {
             compatible = "engleder,tsnep";
             reg = <0x0 0xa0000000 0x0 0x10000>;
             interrupts = <0 89 1>;
@@ -76,4 +95,24 @@ examples:
                 };
             };
         };
+
+        tsnep1: ethernet@a0010000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0010000 0x0 0x10000>;
+            interrupts = <0 93 1>, <0 94 1>, <0 95 1>, <0 96 1>;
+            interrupt-names = "mac", "txrx-1", "txrx-2", "txrx-3";
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy1: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index b0933a8c295a..4b3c590fcebf 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -13,13 +13,16 @@ properties:
   $nodename:
     pattern: "^ethernet(@.*)?$"
 
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Human readable label on a port of a box.
+
   local-mac-address:
     description:
       Specifies the MAC address that was assigned to the network device.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   mac-address:
     description:
@@ -28,9 +31,8 @@ properties:
       to the device by the boot program is different from the
       local-mac-address property.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   max-frame-size:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -65,10 +67,12 @@ properties:
       - gmii
       - sgmii
       - qsgmii
+      - qusgmii
       - tbi
       - rev-mii
       - rmii
       - rev-rmii
+      - moca
 
       # RX and TX delays are added by the MAC when required
       - rgmii
@@ -103,6 +107,12 @@ properties:
   phy-mode:
     $ref: "#/properties/phy-connection-type"
 
+  pcs-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies a reference to a node representing a PCS PHY device on a MDIO
+      bus to link with an external PHY (phy-handle) if exists.
+
   phy-handle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -124,12 +134,6 @@ properties:
       and is useful for determining certain configuration settings
       such as flow control thresholds.
 
-  rx-internal-delay-ps:
-    description: |
-      RGMII Receive Clock Delay defined in pico seconds.
-      This is used for controllers that have configurable RX internal delays.
-      If this property is present then the MAC applies the RX delay.
-
   sfp:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -141,12 +145,6 @@ properties:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
 
-  tx-internal-delay-ps:
-    description: |
-      RGMII Transmit Clock Delay defined in pico seconds.
-      This is used for controllers that have configurable TX internal delays.
-      If this property is present then the MAC applies the TX delay.
-
   managed:
     description:
       Specifies the PHY management type. If auto is set and fixed-link
@@ -158,73 +156,88 @@ properties:
       - in-band-status
 
   fixed-link:
-    allOf:
-      - if:
-          type: array
-        then:
-          deprecated: true
-          minItems: 1
-          maxItems: 1
-          items:
-            items:
-              - minimum: 0
-                maximum: 31
-                description:
-                  Emulated PHY ID, choose any but unique to the all
-                  specified fixed-links
-
-              - enum: [0, 1]
-                description:
-                  Duplex configuration. 0 for half duplex or 1 for
-                  full duplex
-
-              - enum: [10, 100, 1000]
-                description:
-                  Link speed in Mbits/sec.
-
-              - enum: [0, 1]
-                description:
-                  Pause configuration. 0 for no pause, 1 for pause
-
-              - enum: [0, 1]
-                description:
-                  Asymmetric pause configuration. 0 for no asymmetric
-                  pause, 1 for asymmetric pause
-
-
-      - if:
-          type: object
-        then:
-          properties:
-            speed:
-              description:
-                Link speed.
-              $ref: /schemas/types.yaml#/definitions/uint32
-              enum: [10, 100, 1000]
-
-            full-duplex:
-              $ref: /schemas/types.yaml#/definitions/flag
-              description:
-                Indicates that full-duplex is used. When absent, half
-                duplex is assumed.
-
-            pause:
-              $ref: /schemas/types.yaml#definitions/flag
-              description:
-                Indicates that pause should be enabled.
-
-            asym-pause:
-              $ref: /schemas/types.yaml#/definitions/flag
-              description:
-                Indicates that asym_pause should be enabled.
-
-            link-gpios:
-              maxItems: 1
-              description:
-                GPIO to determine if the link is up
-
-          required:
-            - speed
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+        items:
+          - minimum: 0
+            maximum: 31
+            description:
+              Emulated PHY ID, choose any but unique to the all
+              specified fixed-links
+
+          - enum: [0, 1]
+            description:
+              Duplex configuration. 0 for half duplex or 1 for
+              full duplex
+
+          - enum: [10, 100, 1000, 2500, 10000]
+            description:
+              Link speed in Mbits/sec.
+
+          - enum: [0, 1]
+            description:
+              Pause configuration. 0 for no pause, 1 for pause
+
+          - enum: [0, 1]
+            description:
+              Asymmetric pause configuration. 0 for no asymmetric
+              pause, 1 for asymmetric pause
+      - type: object
+        additionalProperties: false
+        properties:
+          speed:
+            description:
+              Link speed.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [10, 100, 1000, 2500, 10000]
+
+          full-duplex:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that full-duplex is used. When absent, half
+              duplex is assumed.
+
+          pause:
+            $ref: /schemas/types.yaml#definitions/flag
+            description:
+              Indicates that pause should be enabled.
+
+          asym-pause:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that asym_pause should be enabled.
+
+          link-gpios:
+            maxItems: 1
+            description:
+              GPIO to determine if the link is up
+
+        required:
+          - speed
+
+allOf:
+  - if:
+      properties:
+        phy-mode:
+          contains:
+            enum:
+              - rgmii
+              - rgmii-rxid
+              - rgmii-txid
+              - rgmii-id
+    then:
+      properties:
+        rx-internal-delay-ps:
+          description:
+            RGMII Receive Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable RX internal delays. If this
+            property is present then the MAC applies the RX delay.
+        tx-internal-delay-ps:
+          description:
+            RGMII Transmit Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable TX internal delays. If this
+            property is present then the MAC applies the TX delay.
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index ee42328a109d..ad808e9ce5b9 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -77,6 +77,15 @@ properties:
     description:
       Maximum PHY supported speed in Mbits / seconds.
 
+  phy-10base-t1l-2.4vpp:
+    description: |
+      tristate, request/disable 2.4 Vpp operating mode. The values are:
+      0: Disable 2.4 Vpp operating mode.
+      1: Request 2.4 Vpp operating mode from link partner.
+      Absence of this property will leave configuration to default values.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [0, 1]
+
   broken-turn-around:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -135,6 +144,12 @@ properties:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
+  pses:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      Specifies a reference to a node representing a Power Sourcing Equipment.
+
   phy-is-integrated:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
index eca41443fcce..e0f376f7e274 100644
--- a/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -21,6 +21,7 @@ properties:
           - fsl,imx28-fec
           - fsl,imx6q-fec
           - fsl,mvf600-fec
+          - fsl,s32v234-fec
       - items:
           - enum:
               - fsl,imx53-fec
@@ -58,6 +59,11 @@ properties:
               - fsl,imx8qxp-fec
           - const: fsl,imx8qm-fec
           - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8ulp-fec
+          - const: fsl,imx6ul-fec
+          - const: fsl,imx6q-fec
 
   reg:
     maxItems: 1
@@ -121,6 +127,10 @@ properties:
 
   mac-address: true
 
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
   tx-internal-delay-ps:
     enum: [0, 2000]
 
@@ -158,14 +168,17 @@ properties:
 
   fsl,stop-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to general purpose register node
+          - description: the gpr register offset for ENET stop request
+          - description: the gpr bit offset for ENET stop request
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
-      gpr is the phandle to general purpose register node.
-      req_gpr is the gpr register offset for ENET stop request.
-      req_bit is the gpr bit offset for ENET stop request.
 
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Specifies the mdio bus in the FEC, used as a container for phy nodes.
 
@@ -180,6 +193,7 @@ properties:
       Should specify the gpio for phy reset.
 
   phy-reset-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true
     description:
       Reset duration in milliseconds.  Should present only if property
@@ -188,12 +202,14 @@ properties:
       and 1 millisecond will be used instead.
 
   phy-reset-active-high:
+    type: boolean
     deprecated: true
     description:
       If present then the reset sequence using the GPIO specified in the
       "phy-reset-gpios" property is reversed (H=reset state, L=operation state).
 
   phy-reset-post-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true
     description:
       Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
@@ -210,7 +226,7 @@ required:
 # least undocumented properties. However, PHY may have a deprecated option to
 # place PHY OF properties in the MAC node, such as Micrel PHY, and we can find
 # these boards which is based on i.MX6QDL.
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
new file mode 100644
index 000000000000..3a35ac1c260d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FMan MAC
+
+maintainers:
+  - Madalin Bucur <madalin.bucur@nxp.com>
+
+description: |
+  Each FMan has several MACs, each implementing an Ethernet interface. Earlier
+  versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for
+  10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller
+  (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate
+  Ethernet Media Access Controller (mEMAC) to handle all speeds.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-dtsec
+      - fsl,fman-xgec
+      - fsl,fman-memac
+
+  cell-index:
+    maximum: 64
+    description: |
+      FManV2:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16]              XGEC            8
+      FM_EPI[16+n]            dTSECn          n-1
+      FM_NPI[11+n]            dTSECn          n-1
+              n = 1,..,5
+
+      FManV3:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16+n]            mEMACn          n-1
+      FM_EPI[25]              mEMAC10         9
+
+      FM_NPI[11+n]            mEMACn          n-1
+      FM_NPI[10]              mEMAC10         9
+      FM_NPI[11]              mEMAC9          8
+              n = 1,..8
+
+      FM_EPI and FM_NPI are located in the FMan memory map.
+
+      2. SoC registers:
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]           FMan            MAC             cell
+                              Unit                            index
+      ============================================================
+      DCFG_DEVDISR2[7]        1               XGEC            8
+      DCFG_DEVDISR2[7+n]      1               dTSECn          n-1
+      DCFG_DEVDISR2[15]       2               XGEC            8
+      DCFG_DEVDISR2[15+n]     2               dTSECn          n-1
+              n = 1,..5
+
+      - T1040, T2080, T4240, B4860:
+      register[bit]                   FMan    MAC             cell
+                                      Unit                    index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[n-1]         1       mEMACn          n-1
+      DCFG_CCSR_DEVDISR2[11+n]        2       mEMACn          n-1
+              n = 1,..6,9,10
+
+      EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    maxItems: 1
+
+  fsl,fman-ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 2
+    description: |
+      An array of two references: the first is the FMan RX port and the second
+      is the TX port used by this MAC.
+
+  ptp-timer:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the IEEE1588 timer
+
+  pcsphy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the PCS (typically found on the SerDes)
+
+  tbi-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the (TBI-based) PCS
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - fsl,fman-ports
+  - ptp-timer
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,fman-dtsec
+    then:
+      required:
+        - tbi-handle
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,fman-memac
+    then:
+      required:
+        - pcsphy-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+            ptp-timer = <&ptp_timer>;
+            tbi-handle = <&tbi0>;
+    };
+  - |
+    ethernet@e8000 {
+            cell-index = <4>;
+            compatible = "fsl,fman-memac";
+            reg = <0xe8000 0x1000>;
+            fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+            ptp-timer = <&ptp_timer0>;
+            pcsphy-handle = <&pcsphy4>;
+            phy-handle = <&sgmii_phy1>;
+            phy-connection-type = "sgmii";
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index c00fb0d22c7b..b9055335db3b 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -232,133 +232,7 @@ port@81000 {
 =============================================================================
 FMan dTSEC/XGEC/mEMAC Node
 
-DESCRIPTION
-
-mEMAC/dTSEC/XGEC are the Ethernet network interfaces
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: A standard property.
-		Must include one of the following:
-		- "fsl,fman-dtsec" for dTSEC MAC
-		- "fsl,fman-xgec" for XGEC MAC
-		- "fsl,fman-memac" for mEMAC MAC
-
-- cell-index
-		Usage: required
-		Value type: <u32>
-		Definition: Specifies the MAC id.
-
-		The cell-index value may be used by the FMan or the SoC, to
-		identify the MAC unit in the FMan (or SoC) memory map.
-		In the tables below there's a description of the cell-index
-		use, there are two tables, one describes the use of cell-index
-		by the FMan, the second describes the use by the SoC:
-
-		1. FMan Registers
-
-		FManV2:
-		register[bit]		MAC		cell-index
-		============================================================
-		FM_EPI[16]		XGEC		8
-		FM_EPI[16+n]		dTSECn		n-1
-		FM_NPI[11+n]		dTSECn		n-1
-			n = 1,..,5
-
-		FManV3:
-		register[bit]		MAC		cell-index
-		============================================================
-		FM_EPI[16+n]		mEMACn		n-1
-		FM_EPI[25]		mEMAC10		9
-
-		FM_NPI[11+n]		mEMACn		n-1
-		FM_NPI[10]		mEMAC10		9
-		FM_NPI[11]		mEMAC9		8
-			n = 1,..8
-
-		FM_EPI and FM_NPI are located in the FMan memory map.
-
-		2. SoC registers:
-
-		- P2041, P3041, P4080 P5020, P5040:
-		register[bit]		FMan		MAC		cell
-					Unit				index
-		============================================================
-		DCFG_DEVDISR2[7]	1		XGEC		8
-		DCFG_DEVDISR2[7+n]	1		dTSECn		n-1
-		DCFG_DEVDISR2[15]	2		XGEC		8
-		DCFG_DEVDISR2[15+n]	2		dTSECn		n-1
-			n = 1,..5
-
-		- T1040, T2080, T4240, B4860:
-		register[bit]			FMan	MAC		cell
-						Unit			index
-		============================================================
-		DCFG_CCSR_DEVDISR2[n-1]		1	mEMACn		n-1
-		DCFG_CCSR_DEVDISR2[11+n]	2	mEMACn		n-1
-			n = 1,..6,9,10
-
-		EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
-		the specific SoC "Device Configuration/Pin Control" Memory
-		Map.
-
-- reg
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property.
-
-- fsl,fman-ports
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: An array of two phandles - the first references is
-		the FMan RX port and the second is the TX port used by this
-		MAC.
-
-- ptp-timer
-		Usage required
-		Value type: <phandle>
-		Definition: A phandle for 1EEE1588 timer.
-
-- pcsphy-handle
-		Usage required for "fsl,fman-memac" MACs
-		Value type: <phandle>
-		Definition: A phandle for pcsphy.
-
-- tbi-handle
-		Usage required for "fsl,fman-dtsec" MACs
-		Value type: <phandle>
-		Definition: A phandle for tbiphy.
-
-EXAMPLE
-
-fman1_tx28: port@a8000 {
-	cell-index = <0x28>;
-	compatible = "fsl,fman-v2-port-tx";
-	reg = <0xa8000 0x1000>;
-};
-
-fman1_rx8: port@88000 {
-	cell-index = <0x8>;
-	compatible = "fsl,fman-v2-port-rx";
-	reg = <0x88000 0x1000>;
-};
-
-ptp-timer: ptp_timer@fe000 {
-	compatible = "fsl,fman-ptp-timer";
-	reg = <0xfe000 0x1000>;
-};
-
-ethernet@e0000 {
-	compatible = "fsl,fman-dtsec";
-	cell-index = <0>;
-	reg = <0xe0000 0x1000>;
-	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
-	ptp-timer = <&ptp-timer>;
-	tbi-handle = <&tbi0>;
-};
+Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
 
 ============================================================================
 FMan IEEE 1588 Node
@@ -388,14 +262,24 @@ PROPERTIES
 		Value type: <prop-encoded-array>
 		Definition: A standard property.
 
-- bus-frequency
+- clocks
+		Usage: optional
+		Value type: <phandle>
+		Definition: A reference to the input clock of the controller
+		from which the MDC frequency is derived.
+
+- clock-frequency
 		Usage: optional
 		Value type: <u32>
-		Definition: Specifies the external MDIO bus clock speed to
-		be used, if different from the standard 2.5 MHz.
-		This may be due to the standard speed being unsupported (e.g.
-		due to a hardware problem), or to advertise that all relevant
-		components in the system support a faster speed.
+		Definition: Specifies the external MDC frequency, in Hertz, to
+		be used. Requires that the input clock is specified in the
+		"clocks" property. See also: mdio.yaml.
+
+- suppress-preamble
+		Usage: optional
+		Value type: <boolean>
+		Definition: Disable generation of preamble bits. See also:
+		mdio.yaml.
 
 - interrupts
 		Usage: required for external MDIO
@@ -410,6 +294,15 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+- fsl,erratum-a009885
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A009885
+		erratum describing that the contents of MDIO_DATA may
+		become corrupt unless it is read within 16 MDC cycles
+		of MDIO_CFG[BSY] being cleared, when performing an
+		MDIO read operation.
+
 - fsl,erratum-a011043
 		Usage: optional
 		Value type: <boolean>
diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
index 8e52b2e683b8..93b3e991d209 100644
--- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml
+++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
@@ -37,6 +37,7 @@ properties:
     const: stmmaceth
 
   mode-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: An extra syscon register that control ethernet interface and timing delay
 
   rx-clk-delay-ps:
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index 08a3f1f6aea2..d23fa3771210 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel DWMAC glue layer Device Tree Bindings
+title: Intel DWMAC glue layer
 
 maintainers:
   - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
@@ -117,7 +117,7 @@ examples:
         snps,mtl-tx-config = <&mtl_tx_setup>;
         snps,tso;
 
-        mdio0 {
+        mdio {
             #address-cells = <1>;
             #size-cells = <0>;
             compatible = "snps,dwmac-mdio";
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index 378ed2d3b003..4e1b79818aff 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -29,12 +29,18 @@ properties:
 
   queue-rx:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue node
+          - description: RX queue instance to use
     description: phandle to the RX queue on the NPE
 
   queue-txready:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX READY queue node
+          - description: TX READY queue instance to use
     description: phandle to the TX READY queue on the NPE
 
   phy-mode: true
@@ -43,13 +49,16 @@ properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the NPE this ethernet instance is using
+          - description: the NPE instance to use
     description: phandle to the NPE this ethernet instance is using
       and the instance to use in the second cell
 
   mdio:
-    type: object
-    $ref: "mdio.yaml#"
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description: optional node for embedded MDIO controller
 
 required:
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
index 4dcd53c3e0b4..e6329febb60c 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
@@ -25,39 +25,62 @@ properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      items:
+        - description: phandle to the NPE this HSS instance is using
+        - description: the NPE instance number
     description: phandle to the NPE this HSS instance is using
       and the instance to use in the second cell
 
   intel,queue-chl-rxtrig:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX trigger queue on the NPE
+          - description: the queue instance number
     description: phandle to the RX trigger queue on the NPE
 
   intel,queue-chl-txready:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX ready queue on the NPE
+          - description: the queue instance number
     description: phandle to the TX ready queue on the NPE
 
   intel,queue-pkt-rx:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
     description: phandle to the packet RX queue on the NPE
 
   intel,queue-pkt-tx:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     maxItems: 4
+    items:
+      items:
+        - description: phandle to the TX queue on the NPE
+        - description: the queue instance number
     description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
 
   intel,queue-pkt-rxfree:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
     maxItems: 4
+    items:
+      items:
+        - description: phandle to the RXFREE queue on the NPE
+        - description: the queue instance number
     description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and
       RXFREE3 queues on the NPE
 
   intel,queue-pkt-txdone:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TXDONE queue on the NPE
+          - description: the queue instance number
     description: phandle to the packet TXDONE queue on the NPE
 
   cts-gpios:
diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
index 437502c5ca96..3ce9f9a16baf 100644
--- a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
+++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
@@ -46,7 +46,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupt-parent
   - interrupts
   - interrupt-names
   - lantiq,tx-burst-length
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
index 7bc074a42369..5bc1a21ca579 100644
--- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
@@ -38,7 +38,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupt-parent
   - interrupts
   - interrupt-names
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
index 76c164a8199a..ebf4e360f8dd 100644
--- a/Documentation/devicetree/bindings/net/litex,liteeth.yaml
+++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
@@ -62,6 +62,7 @@ properties:
 
   mdio:
     $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
deleted file mode 100644
index a1b06fd1962e..000000000000
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Cadence MACB/GEM Ethernet controller
-
-Required properties:
-- compatible: Should be "cdns,[<chip>-]{macb|gem}"
-  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
-  Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
-  Use "cdns,np4-macb" for NP4 SoC devices.
-  Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
-  Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
-  Use "atmel,sama5d29-gem" for GEM XL IP (10/100) available on Atmel sama5d29 SoCs.
-  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
-  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
-  Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
-  Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
-  Use "microchip,sama7g5-emac" for Microchip SAMA7G5 ethernet interface.
-  Use "microchip,sama7g5-gem" for Microchip SAMA7G5 gigabit ethernet interface.
-  Or the generic form: "cdns,emac".
-- reg: Address and length of the register set for the device
-	For "sifive,fu540-c000-gem", second range is required to specify the
-	address and length of the registers for GEMGXL Management block.
-- interrupts: Should contain macb interrupt
-- phy-mode: See ethernet.txt file in the same directory.
-- clock-names: Tuple listing input clock names.
-	Required elements: 'pclk', 'hclk'
-	Optional elements: 'tx_clk'
-	Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
-	Optional elements: 'tsu_clk'
-- clocks: Phandles to input clocks.
-
-Optional properties:
-- mdio: node containing PHY children. If this node is not present, then PHYs
-        will be direct children.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Optional properties for PHY child node:
-- reset-gpios : Should specify the gpio for phy reset
-- magic-packet : If present, indicates that the hardware supports waking
-  up via magic packet.
-- phy-handle : see ethernet.txt file in the same directory
-
-Examples:
-
-	macb0: ethernet@fffc4000 {
-		compatible = "cdns,at32ap7000-macb";
-		reg = <0xfffc4000 0x4000>;
-		interrupts = <21>;
-		phy-mode = "rmii";
-		local-mac-address = [3a 0e 03 04 05 06];
-		clock-names = "pclk", "hclk", "tx_clk";
-		clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
-		ethernet-phy@1 {
-			reg = <0x1>;
-			reset-gpios = <&pioE 6 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
new file mode 100644
index 000000000000..d2906b4a0f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MDIO Ethernet Controller interface
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |
+  The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0,
+  Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that
+  provides an interface with the MDIO bus. Additionally, Armada 7k and Armada
+  8k has a second unit which provides an interface with the xMDIO bus. This
+  driver handles these interfaces.
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-mdio
+      - marvell,xmdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@d0072004 {
+      compatible = "marvell,orion-mdio";
+      reg = <0xd0072004 0x4>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <30>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+
+      phy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index 691f886cfc4a..2bf31572b08d 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -5,6 +5,7 @@ Required properties:
 	"marvell,armada-370-neta"
 	"marvell,armada-xp-neta"
 	"marvell,armada-3700-neta"
+	"marvell,armada-ac5-neta"
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
deleted file mode 100644
index 3f3cfc1d8d4d..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Marvell MDIO Ethernet Controller interface
-
-The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
-identical unit that provides an interface with the MDIO bus.
-Additionally, Armada 7k and Armada 8k has a second unit which
-provides an interface with the xMDIO bus. This driver handles
-these interfaces.
-
-Required properties:
-- compatible: "marvell,orion-mdio" or "marvell,xmdio"
-- reg: address and length of the MDIO registers.  When an interrupt is
-  not present, the length is the size of the SMI register (4 bytes)
-  otherwise it must be 0x84 bytes to cover the interrupt control
-  registers.
-
-Optional properties:
-- interrupts: interrupt line number for the SMI error/done interrupt
-- clocks: phandle for up to four required clocks for the MDIO instance
-
-The child nodes of the MDIO driver are the individual PHY devices
-connected to this MDIO bus. They must have a "reg" property given the
-PHY address on the MDIO bus.
-
-Example at the SoC level without an interrupt property:
-
-mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "marvell,orion-mdio";
-	reg = <0xd0072004 0x4>;
-};
-
-Example with an interrupt property:
-
-mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "marvell,orion-mdio";
-	reg = <0xd0072004 0x84>;
-	interrupts = <30>;
-};
-
-And at the board level:
-
-mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
new file mode 100644
index 000000000000..afd11c9422fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCTP I2C transport binding
+
+maintainers:
+  - Matt Johnston <matt@codeconstruct.com.au>
+
+description: |
+  An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller.
+  MCTP I2C is specified by DMTF DSP0237.
+
+  An mctp-i2c-controller must be attached to an I2C adapter which supports
+  slave functionality. I2C busses (either directly or as subordinate mux
+  busses) are attached to the mctp-i2c-controller with a 'mctp-controller'
+  property on each used bus. Each mctp-controller I2C bus will be presented
+  to the host system as a separate MCTP I2C instance.
+
+properties:
+  compatible:
+    const: mctp-i2c-controller
+
+  reg:
+    minimum: 0x40000000
+    maximum: 0x4000007f
+    description: |
+      7 bit I2C address of the local endpoint.
+      I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    // Basic case of a single I2C bus
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@30 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+  - |
+    // Mux topology with multiple MCTP-handling busses under
+    // a single mctp-i2c-controller.
+    // i2c1 and i2c6 can have MCTP devices, i2c5 does not.
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c1: i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@50 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+    i2c-mux {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      i2c-parent = <&i2c1>;
+
+      i2c5: i2c@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+        eeprom@33 {
+          reg = <0x33>;
+        };
+      };
+
+      i2c6: i2c@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+        mctp-controller;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml
index d169adf5d9f4..4321c87de86f 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml
@@ -15,9 +15,6 @@ description: |+
   bus multiplexer/switch will have one child node for each child bus.
 
 properties:
-  $nodename:
-    pattern: '^mdio-mux[\-@]?'
-
   mdio-parent-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -32,12 +29,12 @@ properties:
 
 patternProperties:
   '^mdio@[0-9a-f]+$':
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
         maxItems: 1
-        description: The sub-bus number.
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
index 08e15fb1584f..b5706d4e7e38 100644
--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -59,7 +59,7 @@ properties:
     type: boolean
 
 patternProperties:
-  "^ethernet-phy@[0-9a-f]+$":
+  '@[0-9a-f]+$':
     type: object
 
     properties:
@@ -76,12 +76,6 @@ patternProperties:
           the turn around line low at end of the control phase of the
           MDIO transaction.
 
-      resets:
-        maxItems: 1
-
-      reset-names:
-        const: phy
-
       reset-gpios:
         maxItems: 1
         description:
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
deleted file mode 100644
index 358fed2fab43..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Mediatek Gigabit Switch
-=======================
-
-The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
-
-Required properties:
-- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the gigabit switches interrupt
-- resets: Should contain the gigabit switches resets
-- reset-names: Should contain the reset names "gsw"
-
-Example:
-
-gsw@10110000 {
-	compatible = "ralink,mt7620-gsw";
-	reg = <0x10110000 8000>;
-
-	resets = <&rstctrl 23>;
-	reset-names = "gsw";
-
-	interrupt-parent = <&intc>;
-	interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
new file mode 100644
index 000000000000..7ef696204c5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -0,0 +1,446 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Frame Engine Ethernet controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
+  have dual GMAC ports.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-eth
+      - mediatek,mt7623-eth
+      - mediatek,mt7622-eth
+      - mediatek,mt7629-eth
+      - mediatek,mt7986-eth
+      - ralink,rt5350-eth
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+  clock-names: true
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: fe
+      - const: gmac
+      - const: ppe
+
+  mediatek,ethsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon node that handles the port setup.
+
+  cci-control-port: true
+
+  mediatek,hifsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek hifsys controller used to provide various clocks
+      and reset to the system.
+
+  mediatek,sgmiisys:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      A list of phandle to the syscon node that handles the SGMII setup which is required for
+      those SoCs equipped with SGMII.
+
+  mediatek,wed:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      List of phandles to wireless ethernet dispatch nodes.
+
+  dma-coherent: true
+
+  mdio-bus:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-eth
+              - mediatek,mt7623-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 4
+          maxItems: 4
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp1
+            - const: gp2
+
+        mediatek,pctl:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the ports slew rate and
+            driver current.
+
+        mediatek,wed: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 11
+          maxItems: 11
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,sgmiisys:
+          minItems: 1
+          maxItems: 1
+
+        mediatek,pcie-mirror:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the mediatek pcie-mirror controller.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7629-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 17
+          maxItems: 17
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: sgmiitop
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: fe
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,infracfg:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the path from GMAC to
+            PHY variants.
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+        mediatek,wed: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7986-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 15
+          maxItems: 15
+
+        clock-names:
+          items:
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: wocpu1
+            - const: wocpu0
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: netsys0
+            - const: netsys1
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+        mediatek,wed-pcie:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the mediatek wed-pcie controller.
+
+patternProperties:
+  "^mac@[0-1]$":
+    type: object
+    additionalProperties: false
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    description:
+      Ethernet MAC node
+    properties:
+      compatible:
+        const: mediatek,eth-mac
+
+      reg:
+        maxItems: 1
+
+      phy-handle: true
+
+      phy-mode: true
+
+    required:
+      - reg
+      - compatible
+      - phy-handle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,ethsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/power/mt7622-power.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      ethernet: ethernet@1b100000 {
+        compatible = "mediatek,mt7622-eth";
+        reg = <0 0x1b100000 0 0x20000>;
+        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_ETH_SEL>,
+                 <&ethsys CLK_ETH_ESW_EN>,
+                 <&ethsys CLK_ETH_GP0_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&sgmiisys CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys CLK_SGMII_CDR_REF>,
+                 <&sgmiisys CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_SGMIIPLL>,
+                 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+        clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+                      "eth2pll";
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys>;
+        cci-control-port = <&cci_control2>;
+        mediatek,pcie-mirror = <&pcie_mirror>;
+        mediatek,hifsys = <&hifsys>;
+        dma-coherent;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio0: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy0: ethernet-phy@0 {
+            reg = <0>;
+          };
+
+          phy1: ethernet-phy@1 {
+            reg = <1>;
+          };
+        };
+
+        gmac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy0>;
+          reg = <0>;
+        };
+
+        gmac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy1>;
+          reg = <1>;
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      eth: ethernet@15100000 {
+        #define CLK_ETH_FE_EN               0
+        #define CLK_ETH_WOCPU1_EN           3
+        #define CLK_ETH_WOCPU0_EN           4
+        #define CLK_TOP_NETSYS_SEL          43
+        #define CLK_TOP_NETSYS_500M_SEL     44
+        #define CLK_TOP_NETSYS_2X_SEL       46
+        #define CLK_TOP_SGM_325M_SEL        47
+        #define CLK_APMIXED_NET2PLL         1
+        #define CLK_APMIXED_SGMPLL          3
+
+        compatible = "mediatek,mt7986-eth";
+        reg = <0 0x15100000 0 0x80000>;
+        interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ethsys CLK_ETH_FE_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_WOCPU1_EN>,
+                 <&ethsys CLK_ETH_WOCPU0_EN>,
+                 <&sgmiisys0 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+                 <&sgmiisys1 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>;
+        clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb",
+                      "sgmii2_tx250m", "sgmii2_rx250m",
+                      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+                      "netsys0", "netsys1";
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+        assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+                          <&topckgen CLK_TOP_SGM_325M_SEL>;
+        assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+                                 <&apmixedsys CLK_APMIXED_SGMPLL>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy5: ethernet-phy@0 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reset-gpios = <&pio 6 1>;
+            reset-deassert-us = <20000>;
+            reg = <5>;
+          };
+
+          phy6: ethernet-phy@1 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reg = <6>;
+          };
+        };
+
+        mac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy5>;
+          reg = <0>;
+        };
+
+        mac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy6>;
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
index e6a5ff208253..64c893c98d80 100644
--- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
@@ -23,6 +23,7 @@ properties:
       - mediatek,mt8516-eth
       - mediatek,mt8518-eth
       - mediatek,mt8175-eth
+      - mediatek,mt8365-eth
 
   reg:
     maxItems: 1
@@ -47,10 +48,25 @@ properties:
       Phandle to the device containing the PERICFG register range. This is used
       to control the MII mode.
 
-  mdio:
-    type: object
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rxc-inverse:
+    type: boolean
     description:
-      Creates and registers an MDIO bus.
+      If present, indicates that clock on RXC pad will be inversed.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that clock on TXC pad will be inversed.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
deleted file mode 100644
index afbcaebf062e..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-MediaTek DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  Should be "mediatek,mt2712-gmac" for MT2712 SoC
-- reg:  Address and length of the register set for the device
-- interrupts:  Should contain the MAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
-	the interrupts in the interrupts property, if available.
-	Should be "macirq" for the main MAC IRQ
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
-- mac-address: See ethernet.txt in the same directory
-- phy-mode: See ethernet.txt in the same directory
-- mediatek,pericfg: A phandle to the syscon node that control ethernet
-	interface and timing delay.
-
-Optional properties:
-- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII interface.
-	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
-- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII interface.
-	It should be defined for RMII interface.
-Both delay properties need to be a multiple of 170 for RGMII interface,
-or will round down. Range 0~31*170.
-Both delay properties need to be a multiple of 550 for MII/RMII interface,
-or will round down. Range 0~31*550.
-
-- mediatek,rmii-rxc: boolean property, if present indicates that the RMII
-	reference clock, which is from external PHYs, is connected to RXC pin
-	on MT2712 SoC.
-	Otherwise, is connected to TXC pin.
-- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
-	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
-- mediatek,txc-inverse: boolean property, if present indicates that
-	1. tx clock will be inversed in MII/RGMII case,
-	2. tx clock inside MAC will be inversed relative to reference clock
-	   which is from external PHYs in RMII case, and it rarely happen.
-	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
-	   when the reference clock is from MT2712 SoC.
-- mediatek,rxc-inverse: boolean property, if present indicates that
-	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case, when
-	   the reference clock is from external PHYs.
-	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
-	   the reference clock is from MT2712 SoC.
-- assigned-clocks: mac_main and ptp_ref clocks
-- assigned-clock-parents: parent clocks of the assigned clocks
-
-Example:
-	eth: ethernet@1101c000 {
-		compatible = "mediatek,mt2712-gmac";
-		reg = <0 0x1101c000 0 0x1300>;
-		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "macirq";
-		phy-mode ="rgmii-rxid";
-		mac-address = [00 55 7b b5 7d f7];
-		clock-names = "axi",
-			      "apb",
-			      "mac_main",
-			      "ptp_ref",
-			      "rmii_internal";
-		clocks = <&pericfg CLK_PERI_GMAC>,
-			 <&pericfg CLK_PERI_GMAC_PCLK>,
-			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
-		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
-		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
-					 <&topckgen CLK_TOP_APLL1_D3>,
-					 <&topckgen CLK_TOP_ETHERPLL_50M>;
-		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
-		mediatek,pericfg = <&pericfg>;
-		mediatek,tx-delay-ps = <1530>;
-		mediatek,rx-delay-ps = <1530>;
-		mediatek,rmii-rxc;
-		mediatek,txc-inverse;
-		mediatek,rxc-inverse;
-		snps,txpbl = <1>;
-		snps,rxpbl = <1>;
-		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
-		snps,reset-active-low;
-	};
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
new file mode 100644
index 000000000000..0fa2132fa4f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DWMAC glue layer controller
+
+maintainers:
+  - Biao Huang <biao.huang@mediatek.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2712-gmac
+          - mediatek,mt8188-gmac
+          - mediatek,mt8195-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-gmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+      - items:
+          - enum:
+              - mediatek,mt8188-gmac
+          - const: mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 5
+    items:
+      - description: AXI clock
+      - description: APB clock
+      - description: MAC Main clock
+      - description: PTP clock
+      - description: RMII reference clock provided by MAC
+      - description: MAC clock gate
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: axi
+      - const: apb
+      - const: mac_main
+      - const: ptp_ref
+      - const: rmii_internal
+      - const: mac_cg
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the syscon node that control ethernet
+      interface and timing delay.
+
+  mediatek,tx-delay-ps:
+    description:
+      The internal TX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290,
+      or will round down. Range 0~31*290.
+
+  mediatek,rx-delay-ps:
+    description:
+      The internal RX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple
+      of 290, or will round down. Range 0~31*290.
+
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rmii-clk-from-mac:
+    type: boolean
+    description:
+      If present, indicates that MAC provides the RMII reference clock, which
+      outputs to TXC pin only.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. tx clock will be inversed in MII/RGMII case,
+      2. tx clock inside MAC will be inversed relative to reference clock
+         which is from external PHYs in RMII case, and it rarely happen.
+      3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+         when the reference clock is from MAC.
+
+  mediatek,rxc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. rx clock will be inversed in MII/RGMII case.
+      2. reference clock will be inversed when arrived at MAC in RMII case, when
+         the reference clock is from external PHYs.
+      3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+         the reference clock is from MAC.
+
+  mediatek,mac-wol:
+    type: boolean
+    description:
+      If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled.
+      Otherwise, PHY WOL is perferred.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phy-mode
+  - mediatek,pericfg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    eth: ethernet@1101c000 {
+        compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+        reg = <0x1101c000 0x1300>;
+        interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "macirq";
+        phy-mode ="rgmii-rxid";
+        mac-address = [00 55 7b b5 7d f7];
+        clock-names = "axi",
+                      "apb",
+                      "mac_main",
+                      "ptp_ref",
+                      "rmii_internal";
+        clocks = <&pericfg CLK_PERI_GMAC>,
+                 <&pericfg CLK_PERI_GMAC_PCLK>,
+                 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+                                 <&topckgen CLK_TOP_APLL1_D3>,
+                                 <&topckgen CLK_TOP_ETHERPLL_50M>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+        mediatek,pericfg = <&pericfg>;
+        mediatek,tx-delay-ps = <1530>;
+        snps,txpbl = <1>;
+        snps,rxpbl = <1>;
+        snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+        snps,reset-delays-us = <0 10000 10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
deleted file mode 100644
index 72d03e07cf7c..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-MediaTek Frame Engine Ethernet controller
-=========================================
-
-The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
-have dual GMAC each represented by a child node..
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be
-		"mediatek,mt2701-eth": for MT2701 SoC
-		"mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
-		"mediatek,mt7622-eth": for MT7622 SoC
-		"mediatek,mt7629-eth": for MT7629 SoC
-		"ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the three frame engines interrupts in numeric
-	order. These are fe_int0, fe_int1 and fe_int2.
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
-	"ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC
-        "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m",
-	"sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC
-	"ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m",
-	"sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m",
-	"sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck",
-	"eth2pll" : For MT7629 SoC.
-- power-domains: phandle to the power domain that the ethernet is part of
-- resets: Should contain phandles to the ethsys reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
-		property
-		These are "fe", "gmac" and "ppe"
-- mediatek,ethsys: phandle to the syscon node that handles the port setup
-- mediatek,infracfg: phandle to the syscon node that handles the path from
-	GMAC to PHY variants, which is required for MT7629 SoC.
-- mediatek,sgmiisys: a list of phandles to the syscon node that handles the
-	SGMII setup which is required for those SoCs equipped with SGMII such
-	as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared
-	by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed
-	to GMAC1 and GMAC2, respectively.
-- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
-	and driver current: only for MT2701 and MT7623 SoC
-
-* Ethernet MAC node
-
-Required properties:
-- compatible: Should be "mediatek,eth-mac"
-- reg: The number of the MAC
-- phy-handle: see ethernet.txt file in the same directory and
-	the phy-mode "trgmii" required being provided when reg
-	is equal to 0 and the MAC uses fixed-link to connect
-	with internal switch such as MT7530.
-
-Example:
-
-eth: ethernet@1b100000 {
-	compatible = "mediatek,mt7623-eth";
-	reg = <0 0x1b100000 0 0x20000>;
-	clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-		 <&ethsys CLK_ETHSYS_ESW>,
-		 <&ethsys CLK_ETHSYS_GP2>,
-		 <&ethsys CLK_ETHSYS_GP1>;
-	clock-names = "ethif", "esw", "gp2", "gp1";
-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
-		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
-		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
-	reset-names = "eth";
-	mediatek,ethsys = <&ethsys>;
-	mediatek,pctl = <&syscfg_pctl_a>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	gmac1: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-handle = <&phy0>;
-	};
-
-	gmac2: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio-bus {
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			phy-mode = "rgmii";
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			phy-mode = "rgmii";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index 8d157f0295a5..a407dd1b4614 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -16,6 +16,7 @@ Optional properties:
 	KSZ8051: register 0x1f, bits 5..4
 	KSZ8081: register 0x1f, bits 5..4
 	KSZ8091: register 0x1f, bits 5..4
+	LAN8814: register EP5.0, bit 6
 
 	See the respective PHY datasheet for the mode values.
 
@@ -45,3 +46,12 @@ Optional properties:
 
 	In fiber mode, auto-negotiation is disabled and the PHY can only work in
 	100base-fx (full and half duplex) modes.
+
+ - coma-mode-gpios: If present the given gpio will be deasserted when the
+		    PHY is probed.
+
+	Some PHYs have a COMA mode input pin which puts the PHY into
+	isolate and power-down mode. On some boards this input is connected
+	to a GPIO of the SoC.
+
+	Supported on the LAN8814.
diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
new file mode 100644
index 000000000000..cf91fecd8909
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the USB Ethernet controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired SMSC95xx compatible USB Ethernet
+  controller.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usb424,9500   # SMSC9500 USB Ethernet Device
+          - usb424,9505   # SMSC9505 USB Ethernet Device
+          - usb424,9530   # SMSC LAN9530 USB Ethernet Device
+          - usb424,9730   # SMSC LAN9730 USB Ethernet Device
+          - usb424,9900   # SMSC9500 USB Ethernet Device (SAL10)
+          - usb424,9901   # SMSC9505 USB Ethernet Device (SAL10)
+          - usb424,9902   # SMSC9500A USB Ethernet Device (SAL10)
+          - usb424,9903   # SMSC9505A USB Ethernet Device (SAL10)
+          - usb424,9904   # SMSC9512/9514 USB Hub & Ethernet Device (SAL10)
+          - usb424,9905   # SMSC9500A USB Ethernet Device (HAL)
+          - usb424,9906   # SMSC9505A USB Ethernet Device (HAL)
+          - usb424,9907   # SMSC9500 USB Ethernet Device (Alternate ID)
+          - usb424,9908   # SMSC9500A USB Ethernet Device (Alternate ID)
+          - usb424,9909   # SMSC9512/9514 USB Hub & Ethernet Devic.  ID)
+          - usb424,9e00   # SMSC9500A USB Ethernet Device
+          - usb424,9e01   # SMSC9505A USB Ethernet Device
+          - usb424,9e08   # SMSC LAN89530 USB Ethernet Device
+          - usb424,ec00   # SMSC9512/9514 USB Hub & Ethernet Device
+
+  reg: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9e00";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
index e79e4e166ad8..dc116f14750e 100644
--- a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
+++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
@@ -38,6 +38,8 @@ properties:
       - description: register based extraction
       - description: frame dma based extraction
       - description: analyzer interrupt
+      - description: ptp interrupt
+      - description: ptp external interrupt
 
   interrupt-names:
     minItems: 1
@@ -45,16 +47,16 @@ properties:
       - const: xtr
       - const: fdma
       - const: ana
+      - const: ptp
+      - const: ptp-ext
 
   resets:
     items:
       - description: Reset controller used for switch core reset (soft reset)
-      - description: Reset controller used for releasing the phy from reset
 
   reset-names:
     items:
       - const: switch
-      - const: phy
 
   ethernet-ports:
     type: object
@@ -143,8 +145,8 @@ examples:
       reg-names = "cpu", "gcb";
       interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
       interrupt-names = "xtr";
-      resets = <&switch_reset 0>, <&phy_reset 0>;
-      reset-names = "switch", "phy";
+      resets = <&switch_reset 0>;
+      reset-names = "switch";
       ethernet-ports {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
index 347b912a46bb..57ffeb8fc876 100644
--- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -53,12 +53,14 @@ properties:
     items:
       - description: register based extraction
       - description: frame dma based extraction
+      - description: ptp interrupt
 
   interrupt-names:
     minItems: 1
     items:
       - const: xtr
       - const: fdma
+      - const: ptp
 
   resets:
     items:
@@ -72,16 +74,20 @@ properties:
 
   ethernet-ports:
     type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
     patternProperties:
       "^port@[0-9a-f]+$":
-        type: object
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
-          '#address-cells':
-            const: 1
-          '#size-cells':
-            const: 0
-
           reg:
             description: Switch port number
 
@@ -91,29 +97,11 @@ properties:
               phandle of a Ethernet SerDes PHY.  This defines which SerDes
               instance will handle the Ethernet traffic.
 
-          phy-mode:
-            description:
-              This specifies the interface used by the Ethernet SerDes towards
-              the PHY or SFP.
-
           microchip,bandwidth:
             description: Specifies bandwidth in Mbit/s allocated to the port.
             $ref: "/schemas/types.yaml#/definitions/uint32"
             maximum: 25000
 
-          phy-handle:
-            description:
-              phandle of a Ethernet PHY.  This is optional and if provided it
-              points to the cuPHY used by the Ethernet SerDes.
-
-          sfp:
-            description:
-              phandle of an SFP.  This is optional and used when not specifying
-              a cuPHY.  It points to the SFP node that describes the SFP used by
-              the Ethernet SerDes.
-
-          managed: true
-
           microchip,sd-sgpio:
             description:
               Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
@@ -142,8 +130,6 @@ required:
   - reg-names
   - interrupts
   - interrupt-names
-  - resets
-  - reset-names
   - ethernet-ports
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml
new file mode 100644
index 000000000000..2c451cfa4e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,miim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi MII Management Controller (MIIM)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: "mdio.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - mscc,ocelot-miim
+      - microchip,lan966x-miim
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: base address
+      - description: associated reset register for internal PHYs
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@107009c {
+      compatible = "mscc,ocelot-miim";
+      reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+      interrupts = <14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
new file mode 100644
index 000000000000..ee0a504bdb24
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip VSC7514 Ethernet switch controller
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  Bindings for the Microchip VSC7514 switch driver
+
+  The VSC7514 switch driver handles up to 11 ports and can inject/extract
+  packets using CPU. Additionally, PTP is supported as well as FDMA for faster
+  packet extraction/injection.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: mscc,vsc7514-switch
+
+  reg:
+    items:
+      - description: system target
+      - description: rewriter target
+      - description: qs target
+      - description: PTP target
+      - description: Port0 target
+      - description: Port1 target
+      - description: Port2 target
+      - description: Port3 target
+      - description: Port4 target
+      - description: Port5 target
+      - description: Port6 target
+      - description: Port7 target
+      - description: Port8 target
+      - description: Port9 target
+      - description: Port10 target
+      - description: QSystem target
+      - description: Analyzer target
+      - description: S0 target
+      - description: S1 target
+      - description: S2 target
+      - description: fdma target
+
+  reg-names:
+    items:
+      - const: sys
+      - const: rew
+      - const: qs
+      - const: ptp
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+      - const: port8
+      - const: port9
+      - const: port10
+      - const: qsys
+      - const: ana
+      - const: s0
+      - const: s1
+      - const: s2
+      - const: fdma
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PTP ready
+      - description: register based extraction
+      - description: frame dma based extraction
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ptp_rdy
+      - const: xtr
+      - const: fdma
+
+  ethernet-ports:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+        description: Ethernet ports handled by the switch
+
+        $ref: ethernet-controller.yaml#
+
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Switch port number
+
+          phy-handle: true
+
+          phy-mode: true
+
+          fixed-link: true
+
+          mac-address: true
+
+        required:
+          - reg
+          - phy-mode
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - fixed-link
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    switch@1010000 {
+      compatible = "mscc,vsc7514-switch";
+      reg = <0x1010000 0x10000>,
+            <0x1030000 0x10000>,
+            <0x1080000 0x100>,
+            <0x10e0000 0x10000>,
+            <0x11e0000 0x100>,
+            <0x11f0000 0x100>,
+            <0x1200000 0x100>,
+            <0x1210000 0x100>,
+            <0x1220000 0x100>,
+            <0x1230000 0x100>,
+            <0x1240000 0x100>,
+            <0x1250000 0x100>,
+            <0x1260000 0x100>,
+            <0x1270000 0x100>,
+            <0x1280000 0x100>,
+            <0x1800000 0x80000>,
+            <0x1880000 0x10000>,
+            <0x1040000 0x10000>,
+            <0x1050000 0x10000>,
+            <0x1060000 0x10000>,
+            <0x1a0 0x1c4>;
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2", "fdma";
+      interrupts = <18 21 16>;
+      interrupt-names = "ptp_rdy", "xtr", "fdma";
+
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phy-mode = "internal";
+        };
+        port1: port@1 {
+          reg = <1>;
+          phy-handle = <&phy1>;
+          phy-mode = "internal";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
deleted file mode 100644
index 7104679cf59d..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-miim.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Microsemi MII Management Controller (MIIM) / MDIO
-=================================================
-
-Properties:
-- compatible: must be "mscc,ocelot-miim"
-- reg: The base address of the MDIO bus controller register bank. Optionally, a
-  second register bank can be defined if there is an associated reset register
-  for internal PHYs
-- #address-cells: Must be <1>.
-- #size-cells: Must be <0>.  MDIO addresses have no size component.
-- interrupts: interrupt specifier (refer to the interrupt binding)
-
-Typically an MDIO bus might have several children.
-
-Example:
-	mdio@107009c {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "mscc,ocelot-miim";
-		reg = <0x107009c 0x36>, <0x10700f0 0x8>;
-		interrupts = <14>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
deleted file mode 100644
index 3b6290b45ce5..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Microsemi Ocelot network Switch
-===============================
-
-The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
-VSC7514)
-
-Required properties:
-- compatible: Should be "mscc,vsc7514-switch"
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "sys"
-  - "rew"
-  - "qs"
-  - "ptp" (optional due to backward compatibility)
-  - "qsys"
-  - "ana"
-  - "portX" with X from 0 to the number of last port index available on that
-    switch
-- interrupts: Should contain the switch interrupts for frame extraction,
-  frame injection and PTP ready.
-- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
-  "ptp_rdy" which is optional due to backward compatibility.
-- ethernet-ports: A container for child nodes representing switch ports.
-
-The ethernet-ports container has the following properties
-
-Required properties:
-
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-
-Each port node must have the following mandatory properties:
-- reg: Describes the port address in the switch
-
-Port nodes may also contain the following optional standardised
-properties, described in binding documents:
-
-- phy-handle: Phandle to a PHY on an MDIO bus. See
-  Documentation/devicetree/bindings/net/ethernet.txt for details.
-
-Example:
-
-	switch@1010000 {
-		compatible = "mscc,vsc7514-switch";
-		reg = <0x1010000 0x10000>,
-		      <0x1030000 0x10000>,
-		      <0x1080000 0x100>,
-		      <0x10e0000 0x10000>,
-		      <0x11e0000 0x100>,
-		      <0x11f0000 0x100>,
-		      <0x1200000 0x100>,
-		      <0x1210000 0x100>,
-		      <0x1220000 0x100>,
-		      <0x1230000 0x100>,
-		      <0x1240000 0x100>,
-		      <0x1250000 0x100>,
-		      <0x1260000 0x100>,
-		      <0x1270000 0x100>,
-		      <0x1280000 0x100>,
-		      <0x1800000 0x80000>,
-		      <0x1880000 0x10000>;
-		reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-			    "port2", "port3", "port4", "port5", "port6",
-			    "port7", "port8", "port9", "port10", "qsys",
-			    "ana";
-		interrupts = <18 21 22>;
-		interrupt-names = "ptp_rdy", "xtr", "inj";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port0: port@0 {
-				reg = <0>;
-				phy-handle = <&phy0>;
-			};
-			port1: port@1 {
-				reg = <1>;
-				phy-handle = <&phy1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
index 15a45db3899a..308485a8ee6c 100644
--- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Marvell International Ltd. NCI NFC controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
@@ -58,7 +58,6 @@ properties:
 
   spi-cpha: true
   spi-cpol: true
-  spi-max-frequency: true
 
 required:
   - compatible
@@ -85,6 +84,7 @@ allOf:
           contains:
             const: marvell,nfc-spi
     then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
       properties:
         break-control: false
         flow-control: false
@@ -108,7 +108,7 @@ allOf:
         spi-max-frequency: false
         reg: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -128,7 +128,7 @@ examples:
 
             i2c-int-rising;
 
-            reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
         };
     };
 
@@ -151,7 +151,7 @@ examples:
             interrupt-parent = <&gpio1>;
             interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 
-            reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
         };
     };
 
@@ -162,7 +162,7 @@ examples:
         nfc {
             compatible = "marvell,nfc-uart";
 
-            reset-n-io = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+            reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>;
 
             hci-muxed;
             flow-control;
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
index 7465aea2e1c0..b2558421268a 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP Semiconductors NCI NFC controller
 
 maintainers:
-  - Charles Gorand <charles.gorand@effinnov.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
index d8ba5a18db98..0509e0166345 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP Semiconductors PN532 NFC controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
index d520414de463..18b3a7d819df 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP Semiconductors PN544 NFC Controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 64995cbb0f97..41c9760227cd 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -8,7 +8,6 @@ title: Samsung S3FWRN5 NCI NFC Controller
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Krzysztof Opasiak <k.opasiak@samsung.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
index a6a1bc788d29..1dcbddbc5a74 100644
--- a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics ST NCI NFC controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
@@ -30,8 +30,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   uicc-present:
     type: boolean
     description: |
@@ -55,10 +53,11 @@ then:
   properties:
     spi-max-frequency: false
 else:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
   required:
     - spi-max-frequency
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
index 4356eacde8aa..8a7274357b46 100644
--- a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics SAS ST21NFCA NFC controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
index d3bca376039e..647569051ed8 100644
--- a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics ST95HF NFC controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
@@ -25,8 +25,6 @@ properties:
   st95hfvin-supply:
     description: ST95HF transceiver's Vin regulator supply
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - enable-gpio
@@ -34,7 +32,10 @@ required:
   - reg
   - spi-max-frequency
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
index 40da2ac98978..9cc236ec42f2 100644
--- a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Mark Greer <mgreer@animalcreek.com>
 
 properties:
@@ -40,8 +40,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   ti,enable-gpios:
     minItems: 1
     maxItems: 2
@@ -65,7 +63,10 @@ required:
   - ti,enable-gpios
   - vin-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
new file mode 100644
index 000000000000..2bd3efff2485
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra234 MGBE Multi-Gigabit Ethernet Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-mgbe
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: hypervisor
+      - const: mac
+      - const: xpcs
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: common
+      - const: macsec-ns
+      - const: macsec
+
+  clocks:
+    maxItems: 12
+
+  clock-names:
+    items:
+      - const: mgbe
+      - const: mac
+      - const: mac-divider
+      - const: ptp-ref
+      - const: rx-input-m
+      - const: rx-input
+      - const: tx
+      - const: eee-pcs
+      - const: rx-pcs-input
+      - const: rx-pcs-m
+      - const: rx-pcs
+      - const: tx-pcs
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: mac
+      - const: pcs
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  phy-handle: true
+
+  phy-mode:
+    contains:
+      enum:
+        - usxgmii
+        - 10gbase-kr
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Optional node for embedded MDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - phy-handle
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    ethernet@6800000 {
+        compatible = "nvidia,tegra234-mgbe";
+        reg = <0x06800000 0x10000>,
+              <0x06810000 0x10000>,
+              <0x068a0000 0x10000>;
+        reg-names = "hypervisor", "mac", "xpcs";
+        interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "common";
+        clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+                 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+                 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+                      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+                      "rx-pcs", "tx-pcs";
+        resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+                 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+        reset-names = "mac", "pcs";
+        interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+                        <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+        power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+
+        phy-handle = <&mgbe0_phy>;
+        phy-mode = "usxgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mgbe0_phy: phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0x0>;
+
+                #phy-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index ee4afe361fac..4c155441acbf 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+title: NXP i.MX8 DWMAC glue layer
 
 maintainers:
   - Joakim Zhang <qiangqing.zhang@nxp.com>
@@ -54,6 +54,10 @@ properties:
 
   intf_mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the GPR syscon
+          - description: the offset of the GPR register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the GPR register, and the offset of the GPR register.
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index d51da24f3505..ab8867e6939b 100644
--- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -31,6 +31,22 @@ patternProperties:
         description:
           The ID number for the child PHY. Should be +1 of parent PHY.
 
+      nxp,rmii-refclk-in:
+        type: boolean
+        description: |
+          The REF_CLK is provided for both transmitted and received data
+          in RMII mode. This clock signal is provided by the PHY and is
+          typically derived from an external 25MHz crystal. Alternatively,
+          a 50MHz clock signal generated by an external oscillator can be
+          connected to pin REF_CLK. A third option is to connect a 25MHz
+          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+          as input or output according to the actual circuit connection.
+          If present, indicates that the REF_CLK will be configured as
+          interface reference clock input when RMII mode enabled.
+          If not present, the REF_CLK will be configured as interface
+          reference clock output when RMII mode enabled.
+          Only supported on TJA1100 and TJA1101.
+
     required:
       - reg
 
@@ -44,6 +60,7 @@ examples:
 
         tja1101_phy0: ethernet-phy@4 {
             reg = <0x4>;
+            nxp,rmii-refclk-in;
         };
     };
   - |
diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
index d7117a22fd87..27db496f1ce8 100644
--- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
@@ -9,6 +9,9 @@ Required properties on all platforms:
 - compatible:	For the OX820 SoC, it should be :
 		- "oxsemi,ox820-dwmac" to select glue
 		- "snps,dwmac-3.512" to select IP version.
+		For the OX810SE SoC, it should be :
+		- "oxsemi,ox810se-dwmac" to select glue
+		- "snps,dwmac-3.512" to select IP version.
 
 - clocks: Should contain phandles to the following clocks
 - clock-names:	Should contain the following:
diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
new file mode 100644
index 000000000000..2d33bbab7163
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  This MII converter is present on the Renesas RZ/N1 SoC family. It is
+  responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-miic
+      - const: renesas,rzn1-miic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MII reference clock
+      - description: RGMII reference clock
+      - description: RMII reference clock
+      - description: AHB clock used for the MII converter register interface
+
+  clock-names:
+    items:
+      - const: mii_ref
+      - const: rgmii_ref
+      - const: rmii_ref
+      - const: hclk
+
+  renesas,miic-switch-portin:
+    description: MII Switch PORTIN configuration. This value should use one of
+      the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^mii-conv@[0-5]$":
+    type: object
+    description: MII converter port
+
+    properties:
+      reg:
+        description: MII Converter port number.
+        enum: [1, 2, 3, 4, 5]
+
+      renesas,miic-input:
+        description: Converter input port configuration. This value should use
+          one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - renesas,miic-input
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 1
+        then:
+          properties:
+            renesas,miic-input:
+              const: 0
+      - if:
+          properties:
+            reg:
+              const: 2
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [1, 11]
+      - if:
+          properties:
+            reg:
+              const: 3
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [7, 10]
+      - if:
+          properties:
+            reg:
+              const: 4
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [4, 6, 9, 13]
+      - if:
+          properties:
+            reg:
+              const: 5
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [3, 5, 8, 12]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/pcs-rzn1-miic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    eth-miic@44030000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+      reg = <0x44030000 0x10000>;
+      clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+              <&sysctrl R9A06G032_CLK_RGMII_REF>,
+              <&sysctrl R9A06G032_CLK_RMII_REF>,
+              <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+      clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+      renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+      power-domains = <&sysctrl>;
+
+      mii_conv1: mii-conv@1 {
+        renesas,miic-input = <MIIC_GMAC1_PORT>;
+        reg = <1>;
+      };
+
+      mii_conv2: mii-conv@2 {
+        renesas,miic-input = <MIIC_SWITCH_PORTD>;
+        reg = <2>;
+      };
+
+      mii_conv3: mii-conv@3 {
+        renesas,miic-input = <MIIC_SWITCH_PORTC>;
+        reg = <3>;
+      };
+
+      mii_conv4: mii-conv@4 {
+        renesas,miic-input = <MIIC_SWITCH_PORTB>;
+        reg = <4>;
+      };
+
+      mii_conv5: mii-conv@5 {
+        renesas,miic-input = <MIIC_SWITCH_PORTA>;
+        reg = <5>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
new file mode 100644
index 000000000000..c6b1c188abf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/podl-pse-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator based Power Sourcing Equipment
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: Regulator based PoDL PSE controller. The device must be referenced
+  by the PHY node to control power injection to the Ethernet cable.
+
+allOf:
+  - $ref: "pse-controller.yaml#"
+
+properties:
+  compatible:
+    const: podl-pse-regulator
+
+  '#pse-cells':
+    const: 0
+
+  pse-supply:
+    description: Power supply for the PSE controller
+
+additionalProperties: false
+
+required:
+  - compatible
+  - pse-supply
+
+examples:
+  - |
+    ethernet-pse {
+      compatible = "podl-pse-regulator";
+      pse-supply = <&reg_t1l1>;
+      #pse-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
new file mode 100644
index 000000000000..b110abb42597
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Sourcing Equipment (PSE).
+
+description: Binding for the Power Sourcing Equipment (PSE) as defined in the
+  IEEE 802.3 specification. It is designed for hardware which is delivering
+  power over twisted pair/ethernet cable. The ethernet-pse nodes should be
+  used to describe PSE controller and referenced by the ethernet-phy node.
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet-pse(@.*)?$"
+
+  "#pse-cells":
+    description:
+      Used to uniquely identify a PSE instance within an IC. Will be
+      0 on PSE nodes with only a single output and at least 1 on nodes
+      controlling several outputs.
+    enum: [0, 1]
+
+required:
+  - "#pse-cells"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index cf4d35edaa1b..1ebf9e8c8a1d 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -34,14 +34,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  '#address-cells':
-    description: number of address cells for the MDIO bus
-    const: 1
-
-  '#size-cells':
-    description: number of size cells on the MDIO bus
-    const: 0
-
   clocks:
     items:
       - description: MAC main clock
@@ -62,6 +54,10 @@ properties:
       - const: mac
       - const: mdio
 
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -85,7 +81,6 @@ examples:
         reset-names = "mac", "mdio";
         clocks = <&pll 1>, <&pll 2>;
         clock-names = "eth", "mdio";
-        qca,ethcfg = <&ethcfg>;
         phy-mode = "mii";
         phy-handle = <&phy_port4>;
     };
@@ -111,9 +106,6 @@ examples:
             #size-cells = <0>;
 
             switch10: switch@10 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
                 compatible = "qca,ar9331-switch";
                 reg = <0x10>;
                 resets = <&rst 8>;
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index b3d4013b7ca6..161d28919316 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -40,6 +40,14 @@ properties:
       Only supported on the AR8031.
     type: boolean
 
+  qca,disable-hibernation-mode:
+    description: |
+      Disable Atheros AR803X PHYs hibernation mode. If present, indicates
+      that the hardware of PHY will not enter power saving mode when the
+      cable is disconnected. And the RX_CLK always keeps outputting a
+      valid clock.
+    type: boolean
+
   qca,smarteee-tw-us-100m:
     description: EEE Tw parameter for 100M links.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
index fcf5035810b5..1f5746849a71 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
@@ -7,7 +7,9 @@ This device has following properties:
 
 Required properties:
 
-- compatible: Should be qcom,qcs404-ethqos"
+- compatible: Should be one of:
+		"qcom,qcs404-ethqos"
+		"qcom,sm8150-ethqos"
 
 - reg: Address and length of the register set for the device
 
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b86edf67ce62..dd4bb2e74880 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -107,6 +107,10 @@ properties:
           - const: imem
           - const: config
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
@@ -178,6 +182,12 @@ examples:
 
         smp2p-mpss {
                 compatible = "qcom,smp2p";
+                interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+                mboxes = <&apss_shared 6>;
+                qcom,smem = <94>, <432>;
+                qcom,local-pid = <0>;
+                qcom,remote-pid = <5>;
+
                 ipa_smp2p_out: ipa-ap-to-modem {
                         qcom,entry-name = "ipa";
                         #qcom,smem-state-cells = <1>;
@@ -189,6 +199,7 @@ examples:
                         #interrupt-cells = <2>;
                 };
         };
+
         ipa@1e40000 {
                 compatible = "qcom,sdm845-ipa";
 
@@ -222,6 +233,8 @@ examples:
                                      "imem",
                                      "config";
 
+                qcom,qmp = <&aoss_qmp>;
+
                 qcom,smem-states = <&ipa_smp2p_out 0>,
                                    <&ipa_smp2p_out 1>;
                 qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 2af304341772..ad8b2b41c140 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/qcom,ipq4019-mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm IPQ40xx MDIO Controller Device Tree Bindings
+title: Qualcomm IPQ40xx MDIO Controller
 
 maintainers:
   - Robert Marko <robert.marko@sartura.hr>
diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt
index 346e6c7f47b7..7ae8aa148634 100644
--- a/Documentation/devicetree/bindings/net/qcom-emac.txt
+++ b/Documentation/devicetree/bindings/net/qcom-emac.txt
@@ -14,7 +14,7 @@ MAC node:
 - mac-address : The 6-byte MAC address. If present, it is the default
 	MAC address.
 - internal-phy : phandle to the internal PHY node
-- phy-handle : phandle the the external PHY node
+- phy-handle : phandle to the external PHY node
 
 Internal PHY node:
 - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
deleted file mode 100644
index 9fe1a0a22e44..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Ralink Frame Engine Ethernet controller
-=======================================
-
-The Ralink frame engine ethernet controller can be found on Ralink and
-Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
-
-Depending on the SoC, there is a number of ports connected to the CPU port
-directly and/or via a (gigabit-)switch.
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
-  "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
-  "mediatek,mt7620-eth", "mediatek,mt7621-eth"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
-- resets: Should contain the frame engines resets
-- reset-names: Should contain the reset names "fe". If a switch is present
-  "esw" is also required.
-
-
-* Ethernet port node
-
-Required properties:
-- compatible: Should be "ralink,eth-port"
-- reg: The number of the physical port
-- phy-handle: reference to the node describing the phy
-
-Example:
-
-mdio-bus {
-	...
-	phy0: ethernet-phy@0 {
-		phy-mode = "mii";
-		reg = <0>;
-	};
-};
-
-ethernet@400000 {
-	compatible = "ralink,rt2880-eth";
-	reg = <0x00400000 10000>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	resets = <&rstctrl 18>;
-	reset-names = "fe";
-
-	interrupt-parent = <&cpuintc>;
-	interrupts = <5>;
-
-	port@0 {
-		compatible = "ralink,eth-port";
-		reg = <0>;
-		phy-handle = <&phy0>;
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
deleted file mode 100644
index 87e315856efa..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Ralink Fast Ethernet Embedded Switch
-====================================
-
-The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
-SoCs (RT3x5x, RT5350, MT76x8).
-
-Required properties:
-- compatible: Should be "ralink,rt3050-esw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the embedded switches interrupt
-- resets: Should contain the embedded switches resets
-- reset-names: Should contain the reset names "esw"
-
-Optional properties:
-- ralink,portmap: can be used to choose if the default switch setup is
-  llllw or wllll
-- ralink,led_polarity: override the active high/low settings of the leds
-
-Example:
-
-esw@10110000 {
-	compatible = "ralink,rt3050-esw";
-	reg = <0x10110000 8000>;
-
-	resets = <&rstctrl 23>;
-	reset-names = "esw";
-
-	interrupt-parent = <&intc>;
-	interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
index 157d606bf9cb..e329ef06e10f 100644
--- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth Device Tree Bindings
+title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth
 
 maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index bda821065a2b..3f41294f5997 100644
--- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -40,13 +40,25 @@ properties:
               - renesas,etheravb-r8a77980     # R-Car V3H
               - renesas,etheravb-r8a77990     # R-Car E3
               - renesas,etheravb-r8a77995     # R-Car D3
-              - renesas,etheravb-r8a779a0     # R-Car V3U
           - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
 
       - items:
           - enum:
+              - renesas,etheravb-r8a779a0     # R-Car V3U
+              - renesas,etheravb-r8a779g0     # R-Car V4H
+          - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,etheravb-r9a09g011 # RZ/V2M
+          - const: renesas,etheravb-rzv2m  # RZ/V2M compatible
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-gbeth # RZ/G2UL
               - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
-          - const: renesas,rzg2l-gbeth  # RZ/G2L
+              - renesas,r9a07g054-gbeth # RZ/V2L
+          - const: renesas,rzg2l-gbeth  # RZ/{G2L,G2UL,V2L} family
 
   reg: true
 
@@ -158,16 +170,33 @@ allOf:
             - const: arp_ns
         rx-internal-delay-ps: false
     else:
-      properties:
-        interrupts:
-          minItems: 25
-          maxItems: 25
-        interrupt-names:
-          items:
-            pattern: '^ch[0-9]+$'
-      required:
-        - interrupt-names
-        - rx-internal-delay-ps
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          interrupts:
+            minItems: 29
+            maxItems: 29
+          interrupt-names:
+            items:
+              pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$'
+          rx-internal-delay-ps: false
+        required:
+          - interrupt-names
+      else:
+        properties:
+          interrupts:
+            minItems: 25
+            maxItems: 25
+          interrupt-names:
+            items:
+              pattern: '^ch[0-9]+$'
+        required:
+          - interrupt-names
+          - rx-internal-delay-ps
 
   - if:
       properties:
@@ -183,7 +212,7 @@ allOf:
               - renesas,etheravb-r8a77965
               - renesas,etheravb-r8a77970
               - renesas,etheravb-r8a77980
-              - renesas,etheravb-r8a779a0
+              - renesas,etheravb-rcar-gen4
     then:
       required:
         - tx-internal-delay-ps
@@ -229,17 +258,35 @@ allOf:
             - const: chi
             - const: refclk
     else:
-      properties:
-        clocks:
-          minItems: 1
-          items:
-            - description: AVB functional clock
-            - description: Optional TXC reference clock
-        clock-names:
-          minItems: 1
-          items:
-            - const: fck
-            - const: refclk
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          clocks:
+            items:
+              - description: Main clock
+              - description: Coherent Hub Interface clock
+              - description: gPTP reference clock
+          clock-names:
+            items:
+              - const: axi
+              - const: chi
+              - const: gptp
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            items:
+              - description: AVB functional clock
+              - description: Optional TXC reference clock
+          clock-names:
+            minItems: 1
+            items:
+              - const: fck
+              - const: refclk
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
new file mode 100644
index 000000000000..a6d4f14df442
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rockchip,emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-emac
+      - rockchip,rk3066-emac
+      - rockchip,rk3188-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: host clock
+      - description: reference clock
+      - description: mac TX/RX clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hclk
+      - const: macref
+      - const: macclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon GRF used to control speed and mode for the EMAC.
+
+  phy-supply:
+    description:
+      Phandle to a regulator if the PHY needs one.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phy
+  - phy-mode
+  - mdio
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-emac
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          minItems: 3
+
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@10204000 {
+      compatible = "rockchip,rk3188-emac";
+      reg = <0xc0fc2000 0x3c>;
+      interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+      clock-names = "hclk", "macref";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+      pinctrl-names = "default";
+      phy = <&phy0>;
+      phy-mode = "rmii";
+      phy-supply = <&vcc_rmii>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy0: ethernet-phy@0 {
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
index 083623c8d718..42fb72b6909d 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -25,7 +25,9 @@ select:
           - rockchip,rk3368-gmac
           - rockchip,rk3399-gmac
           - rockchip,rk3568-gmac
+          - rockchip,rk3588-gmac
           - rockchip,rv1108-gmac
+          - rockchip,rv1126-gmac
   required:
     - compatible
 
@@ -47,9 +49,11 @@ properties:
               - rockchip,rk3368-gmac
               - rockchip,rk3399-gmac
               - rockchip,rv1108-gmac
+              - rockchip,rv1126-gmac
       - items:
           - enum:
               - rockchip,rk3568-gmac
+              - rockchip,rk3588-gmac
           - const: snps,dwmac-4.20a
 
   clocks:
@@ -81,6 +85,11 @@ properties:
     description: The phandle of the syscon node for the general register file.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  rockchip,php-grf:
+    description:
+      The phandle of the syscon node for the peripheral general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   tx_delay:
     description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
deleted file mode 100644
index 832139919f20..000000000000
--- a/Documentation/devicetree/bindings/net/sff,sfp.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
-Transceiver
-
-Required properties:
-
-- compatible : must be one of
-  "sff,sfp" for SFP modules
-  "sff,sff" for soldered down SFF modules
-
-- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
-  interface
-
-Optional Properties:
-
-- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
-  module presence input gpio signal, active (module absent) high. Must
-  not be present for SFF modules
-
-- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
-  Indication input gpio signal, active (signal lost) high
-
-- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter
-  Fault input gpio signal, active (fault condition) high
-
-- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable
-  output gpio signal, active (Tx disable) high
-
-- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
-  Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
-  Must not be present for SFF modules
-
-- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
-  Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
-  high Tx rate. Must not be present for SFF modules
-
-- maximum-power-milliwatt : Maximum module power consumption
-  Specifies the maximum power consumption allowable by a module in the
-  slot, in milli-Watts.  Presently, modules can be up to 1W, 1.5W or 2W.
-
-Example #1: Direct serdes to SFP connection
-
-sfp_eth3: sfp-eth3 {
-	compatible = "sff,sfp";
-	i2c-bus = <&sfp_1g_i2c>;
-	los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
-	mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
-	maximum-power-milliwatt = <1000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
-	tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
-	tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
-};
-
-&cps_emac3 {
-	phy-names = "comphy";
-	phys = <&cps_comphy5 0>;
-	sfp = <&sfp_eth3>;
-};
-
-Example #2: Serdes to PHY to SFP connection
-
-sfp_eth0: sfp-eth0 {
-	compatible = "sff,sfp";
-	i2c-bus = <&sfpp0_i2c>;
-	los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
-	mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cps_sfpp0_pins>;
-	tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
-	tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
-};
-
-p0_phy: ethernet-phy@0 {
-	compatible = "ethernet-phy-ieee802.3-c45";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
-	reg = <0>;
-	interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
-	sfp = <&sfp_eth0>;
-};
-
-&cpm_eth0 {
-	phy = <&p0_phy>;
-	phy-mode = "10gbase-kr";
-};
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
new file mode 100644
index 000000000000..06c66ab81c01
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/sff,sfp.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
+  Transceiver
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    enum:
+      - sff,sfp  # for SFP modules
+      - sff,sff  # for soldered down SFF modules
+
+  i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of an I2C bus controller for the SFP two wire serial
+
+  maximum-power-milliwatt:
+    maxItems: 1
+    description:
+      Maximum module power consumption Specifies the maximum power consumption
+      allowable by a module in the slot, in milli-Watts. Presently, modules can
+      be up to 1W, 1.5W or 2W.
+
+  "mod-def0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
+      presence input gpio signal, active (module absent) high. Must not be
+      present for SFF modules
+
+  "los-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Receiver Loss of Signal Indication
+      input gpio signal, active (signal lost) high
+
+  "tx-fault-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Module Transmitter Fault input gpio
+      signal, active (fault condition) high
+
+  "tx-disable-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Transmitter Disable output gpio
+      signal, active (Tx disable) high
+
+  "rate-select0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
+      output gpio signal, low - low Rx rate, high - high Rx rate Must not be
+      present for SFF modules
+
+  "rate-select1-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
+      output gpio signal (SFP+ only), low - low Tx rate, high - high Tx rate. Must
+      not be present for SFF modules
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sff,sff
+    then:
+      properties:
+        mod-def0-gpios: false
+        rate-select0-gpios: false
+        rate-select1-gpios: false
+
+required:
+  - compatible
+  - i2c-bus
+
+additionalProperties: false
+
+examples:
+  - | # Direct serdes to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+
+    sfp1: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_1g_i2c>;
+      los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+      maximum-power-milliwatt = <1000>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
+      tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
+    };
+
+    ethernet {
+      phy-names = "comphy";
+      phys = <&cps_comphy5 0>;
+      sfp = <&sfp1>;
+    };
+
+  - | # Serdes to PHY to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sfp2: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_i2c>;
+      los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cps_sfpp0_pins>;
+      tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+    };
+
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy: ethernet-phy@0 {
+        compatible = "ethernet-phy-ieee802.3-c45";
+        pinctrl-names = "default";
+        pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
+        reg = <0>;
+        interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+        sfp = <&sfp2>;
+      };
+    };
+
+    ethernet {
+      phy = <&phy>;
+      phy-mode = "10gbase-kr";
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
new file mode 100644
index 000000000000..6df533162632
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: smsc,lan91c111
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 1, 2, 4 ]
+    default: 4
+
+  reset-gpios:
+    description: GPIO connected to control RESET pin
+    maxItems: 1
+
+  power-gpios:
+    description: GPIO connect to control PWRDWN pin
+    maxItems: 1
+
+  pxa-u16-align4:
+    description: put in place the workaround the force all u16 writes to be
+      32 bits aligned
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@4010000 {
+          compatible = "smsc,lan91c111";
+          reg = <0x40100000 0x10000>;
+          phy-mode = "mii";
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+          reg-io-width = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
deleted file mode 100644
index 309e37eb7c7c..000000000000
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-SMSC LAN91c111 Ethernet mac
-
-Required properties:
-- compatible = "smsc,lan91c111";
-- reg : physical address and size of registers
-- interrupts : interrupt connection
-
-Optional properties:
-- phy-device : see ethernet.txt file in the same directory
-- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
-  are supported on the device.  Valid value for SMSC LAN91c111 are
-  1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
-  16-bit access only.
-- power-gpios: GPIO to control the PWRDWN pin
-- reset-gpios: GPIO to control the RESET pin
-- pxa-u16-align4 : Boolean, put in place the workaround the force all
-		   u16 writes to be 32 bits aligned
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 7ae70dc27f78..13b984076af5 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys DesignWare MAC Device Tree Bindings
+title: Synopsys DesignWare MAC
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
@@ -53,20 +53,20 @@ properties:
         - allwinner,sun8i-r40-gmac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - ingenic,jz4775-mac
         - ingenic,x1000-mac
         - ingenic,x1600-mac
         - ingenic,x1830-mac
         - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
+        - renesas,r9a06g032-gmac
+        - renesas,rzn1-gmac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
@@ -74,6 +74,7 @@ properties:
         - rockchip,rk3328-gmac
         - rockchip,rk3366-gmac
         - rockchip,rk3368-gmac
+        - rockchip,rk3588-gmac
         - rockchip,rk3399-gmac
         - rockchip,rv1108-gmac
         - snps,dwmac
@@ -137,6 +138,9 @@ properties:
   reset-names:
     const: stmmaceth
 
+  power-domains:
+    maxItems: 1
+
   mac-mode:
     $ref: ethernet-controller.yaml#/properties/phy-connection-type
     description:
@@ -285,8 +289,14 @@ properties:
       is supported. For example, this is used in case of SGMII and
       MAC2MAC connection.
 
+  snps,clk-csr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Frequency division factor for MDC clock.
+
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Creates and registers an MDIO bus.
 
@@ -297,6 +307,60 @@ properties:
     required:
       - compatible
 
+  stmmac-axi-config:
+    type: object
+    unevaluatedProperties: false
+    description:
+      AXI BUS Mode parameters.
+
+    properties:
+      snps,lpi_en:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          enable Low Power Interface
+
+      snps,xit_frm:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          unlock on WoL
+
+      snps,wr_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max write outstanding req. limit
+
+      snps,rd_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max read outstanding req. limit
+
+      snps,kbbe:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          do not cross 1KiB boundary.
+
+      snps,blen:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          this is a vector of supported burst length.
+        minItems: 7
+        maxItems: 7
+
+      snps,fb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          fixed-burst
+
+      snps,mb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          mixed-burst
+
+      snps,rb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          rebuild INCRx Burst
+
 required:
   - compatible
   - reg
@@ -326,6 +390,9 @@ allOf:
               - ingenic,x1600-mac
               - ingenic,x1830-mac
               - ingenic,x2000-mac
+              - snps,dwmac-3.50a
+              - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -336,21 +403,21 @@ allOf:
           description:
             Programmable Burst Length (tx and rx)
           $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [2, 4, 8]
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,txpbl:
           description:
             Tx Programmable Burst Length. If set, DMA tx will use this
             value rather than snps,pbl.
           $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [2, 4, 8]
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,rxpbl:
           description:
             Rx Programmable Burst Length. If set, DMA rx will use this
             value rather than snps,pbl.
           $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [2, 4, 8]
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,no-pbl-x8:
           $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index 6bc61c42418f..b0ebcef6801c 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -13,9 +13,6 @@ description: |
   This describes the devicetree bindings for AVE ethernet controller
   implemented on Socionext UniPhier SoCs.
 
-allOf:
-  - $ref: ethernet-controller.yaml#
-
 properties:
   compatible:
     enum:
@@ -44,34 +41,63 @@ properties:
     minItems: 1
     maxItems: 4
 
-  clock-names:
-    oneOf:
-      - items:          # for Pro4
-          - const: gio
-          - const: ether
-          - const: ether-gb
-          - const: ether-phy
-      - const: ether    # for others
+  clock-names: true
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:          # for Pro4
-          - const: gio
-          - const: ether
-      - const: ether    # for others
+  reset-names: true
 
   socionext,syscon-phy-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: ID of MAC instance
     description:
       A phandle to syscon with one argument that configures phy mode.
       The argument is the ID of MAC instance.
 
   mdio:
     $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ave4
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: gio
+            - const: ether
+            - const: ether-gb
+            - const: ether-phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: ether
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: ether
+        resets:
+          maxItems: 1
+        reset-names:
+          const: ether
 
 required:
   - compatible
@@ -85,7 +111,7 @@ required:
   - reset-names
   - mdio
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index 577f4e284425..5c93167b3b41 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -44,6 +44,12 @@ properties:
               - st,stm32-dwmac
           - const: snps,dwmac-3.50a
 
+  reg: true
+
+  reg-names:
+    items:
+      - const: stmmaceth
+
   clocks:
     minItems: 3
     items:
@@ -68,6 +74,10 @@ properties:
 
   st,syscon:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: phandle to the syscon node which encompases the glue register
+          - description: offset of the control register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
@@ -102,7 +112,7 @@ examples:
            compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
            reg = <0x5800a000 0x2000>;
            reg-names = "stmmaceth";
-           interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "macirq";
            clock-names = "stmmaceth",
                      "mac-clk-tx",
@@ -121,6 +131,7 @@ examples:
            phy-mode = "rgmii";
        };
 
+  - |
     //Example 2 (MCU example)
      ethernet1: ethernet@40028000 {
            compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
@@ -136,6 +147,7 @@ examples:
            phy-mode = "mii";
        };
 
+  - |
     //Example 3
      ethernet2: ethernet@40027000 {
            compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
new file mode 100644
index 000000000000..5b130097449b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Dual Ethernet MAC
+
+maintainers:
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  Sunplus SP7021 dual 10M/100M Ethernet MAC controller.
+  Device node of the controller has following properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+    description: Ethernet ports to PHY
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^port@[0-1]$":
+        type: object
+        additionalProperties: false
+        description: Port to PHY
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 1
+
+          phy-handle:
+            maxItems: 1
+
+          phy-mode:
+            maxItems: 1
+
+          nvmem-cells:
+            items:
+              - description: nvmem cell address of MAC address
+
+          nvmem-cell-names:
+            description: names corresponding to the nvmem cells
+            items:
+              - const: mac-address
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - nvmem-cells
+          - nvmem-cell-names
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - pinctrl-0
+  - pinctrl-names
+  - ethernet-ports
+  - mdio
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@9c108000 {
+        compatible = "sunplus,sp7021-emac";
+        reg = <0x9c108000 0x400>;
+        interrupt-parent = <&intc>;
+        interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0xa7>;
+        resets = <&rstc 0x97>;
+        pinctrl-0 = <&emac_demo_board_v3_pins>;
+        pinctrl-names = "default";
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr0>;
+                nvmem-cell-names = "mac-address";
+            };
+
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr1>;
+                nvmem-cell-names = "mac-address";
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+
+            eth_phy1: ethernet-phy@1 {
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 07a00f53adbf..e36c7817be69 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
+title: TI SoC Ethernet Switch Controller (CPSW)
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -77,6 +77,8 @@ properties:
 
   ethernet-ports:
     type: object
+    additionalProperties: false
+
     properties:
       '#address-cells':
         const: 1
@@ -88,8 +90,8 @@ properties:
         type: object
         description: CPSW external ports
 
-        allOf:
-          - $ref: ethernet-controller.yaml#
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
@@ -118,6 +120,7 @@ properties:
 
   cpts:
     type: object
+    unevaluatedProperties: false
     description:
       The Common Platform Time Sync (CPTS) module
 
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 5728fe23f530..a339202c5e8e 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -34,9 +34,17 @@ properties:
     maxItems: 1
 
   bus_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 2500000
     description: MDIO Bus frequency
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
   ti,hwmods:
     description: TI hwmod name
     deprecated: true
@@ -49,6 +57,7 @@ if:
     compatible:
       contains:
         const: ti,davinci_mdio
+then:
   required:
     - bus_freq
 
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index 75e8712e903a..f2489a9c852f 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: TI DP83822 ethernet PHY
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
index 047d757e8d82..b8c0e4b5b494 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -11,7 +11,7 @@ allOf:
   - $ref: "ethernet-controller.yaml#"
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83867 device is a robust, low power, fully featured Physical Layer
@@ -31,6 +31,16 @@ properties:
   reg:
     maxItems: 1
 
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell containing the value to write to the
+      IO_IMPEDANCE_CTRL field of the IO_MUX_CFG register.
+
+  nvmem-cell-names:
+    items:
+      - const: io_impedance_ctrl
+
   ti,min-output-impedance:
     type: boolean
     description: |
@@ -42,9 +52,11 @@ properties:
     description: |
       MAC Interface Impedance control to set the programmable output impedance
       to a maximum value (70 ohms).
-      Note: ti,min-output-impedance and ti,max-output-impedance are mutually
-        exclusive. When both properties are present ti,max-output-impedance
-        takes precedence.
+      Note: Specifying an io_impedance_ctrl nvmem cell or one of the
+        ti,min-output-impedance, ti,max-output-impedance properties
+        are mutually exclusive. If more than one is present, an nvmem
+        cell takes precedence over ti,max-output-impedance, which in
+        turn takes precedence over ti,min-output-impedance.
 
   tx-fifo-depth:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index 70a1209cb13b..b04ff0014a59 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -11,7 +11,7 @@ allOf:
   - $ref: "ethernet-phy.yaml#"
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver
@@ -92,7 +92,7 @@ examples:
         tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
-        ti,max-output-impedance = "true";
+        ti,max-output-impedance;
         ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
         rx-internal-delay-ps = <2000>;
         tx-internal-delay-ps = <2000>;
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 4b97a0f1175b..821974815dec 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
+title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -55,6 +55,7 @@ properties:
   compatible:
     enum:
       - ti,am654-cpsw-nuss
+      - ti,j7200-cpswxg-nuss
       - ti,j721e-cpsw-nuss
       - ti,am642-cpsw-nuss
 
@@ -110,16 +111,17 @@ properties:
         const: 0
 
     patternProperties:
-      port@[1-2]:
+      "^port@[1-4]$":
         type: object
         description: CPSWxG NUSS external ports
 
         $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
             minimum: 1
-            maximum: 2
+            maximum: 4
             description: CPSW port number
 
           phys:
@@ -136,6 +138,11 @@ properties:
 
           ti,syscon-efuse:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              - items:
+                  - description: Phandle to the system control device node which
+                      provides access to efuse
+                  - description: offset to efuse registers???
             description:
               Phandle to the system control device node which provides access
               to efuse IO range with MAC addresses
@@ -173,6 +180,19 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: ti,j7200-cpswxg-nuss
+    then:
+      properties:
+        ethernet-ports:
+          patternProperties:
+            "^port@[3-4]$": false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 1a81bf70c88c..6230f576134b 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module Device Tree Bindings
+title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -95,6 +95,7 @@ properties:
 
   refclk-mux:
     type: object
+    additionalProperties: false
     description: CPTS reference clock multiplexer clock
     properties:
       '#clock-cells':
@@ -103,12 +104,6 @@ properties:
       clocks:
         maxItems: 8
 
-      assigned-clocks:
-        maxItems: 1
-
-      assigned-clocks-parents:
-        maxItems: 1
-
     required:
       - clocks
 
@@ -148,4 +143,3 @@ examples:
                assigned-clock-parents = <&k3_clks 118 11>;
          };
     };
-
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
index 59724d18e6f3..0988ed8d1c12 100644
--- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -52,6 +52,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     soc {
@@ -63,7 +64,7 @@ examples:
             reg = <0 0x28000000 0 0x10000>;
             interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "macirq";
-            clocks = <&clk300mhz>, <&clk125mhz>;
+            clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
             clock-names = "stmmaceth", "phy_ref_clk";
             snps,txpbl = <4>;
             snps,rxpbl = <4>;
@@ -71,7 +72,7 @@ examples:
             phy-mode = "rgmii-id";
             phy-handle = <&phy0>;
 
-            mdio0 {
+            mdio {
                 #address-cells = <0x1>;
                 #size-cells = <0x0>;
                 compatible = "snps,dwmac-mdio";
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
index 8156a9aeb589..6a71f694cb55 100644
--- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -4,10 +4,10 @@
 $id: "http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: The Vertexcom MSE102x (SPI) Device Tree Bindings
+title: The Vertexcom MSE102x (SPI)
 
 maintainers:
-  - Stefan Wahren <stefan.wahren@in-tech.com>
+  - Stefan Wahren <stefan.wahren@chargebyte.com>
 
 description:
   Vertexcom's MSE102x are a family of HomePlug GreenPHY chips.
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index c11f23b20c4c..fec1cc9b9a08 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM4329 family fullmac wireless SDIO devices
+title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
 
 maintainers:
   - Arend van Spriel <arend@broadcom.com>
@@ -41,11 +41,17 @@ properties:
               - cypress,cyw4373-fmac
               - cypress,cyw43012-fmac
           - const: brcm,bcm4329-fmac
-      - const: brcm,bcm4329-fmac
+      - enum:
+          - brcm,bcm4329-fmac
+          - pci14e4,43dc  # BCM4355
+          - pci14e4,4464  # BCM4364
+          - pci14e4,4488  # BCM4377
+          - pci14e4,4425  # BCM4378
+          - pci14e4,4433  # BCM4387
 
   reg:
-    description: SDIO function number for the device, for most cases
-      this will be 1.
+    description: SDIO function number for the device (for most cases
+      this will be 1) or PCI device identifier.
 
   interrupts:
     maxItems: 1
@@ -75,6 +81,41 @@ properties:
     items:
       pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
 
+  brcm,ccode-map-trivial:
+    description: |
+      Use a trivial mapping of ISO3166 country codes to brcmfmac firmware
+      country code and revision: cc -> { cc, 0 }. In other words, assume that
+      the CLM blob firmware uses ISO3166 country codes as well, and that all
+      revisions are zero. This property is mutually exclusive with
+      brcm,ccode-map. If both properties are specified, then brcm,ccode-map
+      takes precedence.
+    type: boolean
+
+  brcm,cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Wi-Fi radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device if present.
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Overrides the board type, which is normally the compatible of
+      the root node. This can be used to decouple the overall system board or
+      device name from the board type for WiFi purposes, which is used to
+      construct firmware and NVRAM configuration filenames, allowing for
+      multiple devices that share the same module or characteristics for the
+      WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms,
+      this should be the Apple module-instance codename prefixed by "apple,",
+      e.g. "apple,honshu".
+
+  apple,antenna-sku:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Antenna SKU used to identify a specific antenna configuration
+      on Apple platforms. This is use to build firmware filenames, to allow
+      platforms with different antenna configs to have different firmware and/or
+      NVRAM. This would normally be filled in by the bootloader from platform
+      configuration data.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index 1489d3c1cd6e..70e328589cfb 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -18,7 +18,7 @@ description: |
   wireless device. The node is expected to be specified as a child
   node of the PCI controller to which the wireless chip is connected.
   Alternatively, it can specify the wireless part of the MT7628/MT7688
-  or MT7622 SoC.
+  or MT7622/MT7986 SoC.
 
 allOf:
   - $ref: ieee80211.yaml#
@@ -29,9 +29,13 @@ properties:
       - mediatek,mt76
       - mediatek,mt7628-wmac
       - mediatek,mt7622-wmac
+      - mediatek,mt7986-wmac
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+    description:
+      MT7986 should contain 3 regions consys, dcm, and sku, in this order.
 
   interrupts:
     maxItems: 1
@@ -39,6 +43,27 @@ properties:
   power-domains:
     maxItems: 1
 
+  memory-region:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Specify the consys reset for mt7986.
+
+  reset-names:
+    const: consys
+
+  clocks:
+    maxItems: 2
+    description:
+      Specify the consys clocks for mt7986.
+
+  clock-names:
+    items:
+      - const: mcu
+      - const: ap2conn
+
   mediatek,infracfg:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -54,6 +79,10 @@ properties:
 
   mediatek,mtd-eeprom:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to MTD partition
+          - description: offset containing EEPROM data
     description:
       Phandle to a MTD partition + offset containing EEPROM data
 
@@ -69,6 +98,15 @@ properties:
       calibration data is generic and specific calibration data should be
       pulled from the OTP ROM
 
+  mediatek,disable-radar-background:
+    type: boolean
+    description:
+      Disable/enable radar/CAC detection running on a dedicated offchannel
+      chain available on some hw.
+      Background radar/CAC detection allows to avoid the CAC downtime
+      switching on a different channel during CAC detection on the selected
+      radar channel.
+
   led:
     type: object
     $ref: /schemas/leds/common.yaml#
@@ -165,7 +203,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -191,9 +229,9 @@ examples:
                    channels = <36 48>;
                    rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
                    rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
-                                        <3 22 22 22 22 22 22 22 22 22 22>;
+                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
                    rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
-                                       <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
                };
                b1 {
                    channels = <100 181>;
@@ -231,3 +269,18 @@ examples:
 
       power-domains = <&scpsys 3>;
     };
+
+  - |
+    wifi@18000000 {
+        compatible = "mediatek,mt7986-wmac";
+        resets = <&watchdog 23>;
+        reset-names = "consys";
+        reg = <0x18000000 0x1000000>,
+              <0x10003000 0x1000>,
+              <0x11d10000 0x1000>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&topckgen 50>,
+                 <&topckgen 62>;
+        clock-names = "mcu", "ap2conn";
+        memory-region = <&wmcpu_emi>;
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
index 60de78f1bc7b..b3405f284580 100644
--- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -20,8 +20,6 @@ properties:
 
   reg: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -51,7 +49,10 @@ required:
   - compatible
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
index 8cd0adbf7021..7029cb1f38ff 100644
--- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Atheros ath9k wireless devices Generic Binding
 
 maintainers:
-  - Kalle Valo <kvalo@codeaurora.org>
+  - Toke Høiland-Jørgensen <toke@toke.dk>
 
 description: |
   This node provides properties for configuring the ath9k wireless device.
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index cdf7b873b419..f7cf135aa37f 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -9,7 +9,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies ath11k wireless devices Generic Binding
 
 maintainers:
-  - Kalle Valo <kvalo@codeaurora.org>
+  - Kalle Valo <kvalo@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
@@ -20,120 +20,17 @@ properties:
     enum:
       - qcom,ipq8074-wifi
       - qcom,ipq6018-wifi
+      - qcom,wcn6750-wifi
 
   reg:
     maxItems: 1
 
   interrupts:
-    items:
-      - description: misc-pulse1 interrupt events
-      - description: misc-latch interrupt events
-      - description: sw exception interrupt events
-      - description: watchdog interrupt events
-      - description: interrupt event for ring CE0
-      - description: interrupt event for ring CE1
-      - description: interrupt event for ring CE2
-      - description: interrupt event for ring CE3
-      - description: interrupt event for ring CE4
-      - description: interrupt event for ring CE5
-      - description: interrupt event for ring CE6
-      - description: interrupt event for ring CE7
-      - description: interrupt event for ring CE8
-      - description: interrupt event for ring CE9
-      - description: interrupt event for ring CE10
-      - description: interrupt event for ring CE11
-      - description: interrupt event for ring host2wbm-desc-feed
-      - description: interrupt event for ring host2reo-re-injection
-      - description: interrupt event for ring host2reo-command
-      - description: interrupt event for ring host2rxdma-monitor-ring3
-      - description: interrupt event for ring host2rxdma-monitor-ring2
-      - description: interrupt event for ring host2rxdma-monitor-ring1
-      - description: interrupt event for ring reo2ost-exception
-      - description: interrupt event for ring wbm2host-rx-release
-      - description: interrupt event for ring reo2host-status
-      - description: interrupt event for ring reo2host-destination-ring4
-      - description: interrupt event for ring reo2host-destination-ring3
-      - description: interrupt event for ring reo2host-destination-ring2
-      - description: interrupt event for ring reo2host-destination-ring1
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
-      - description: interrupt event for ring ppdu-end-interrupts-mac3
-      - description: interrupt event for ring ppdu-end-interrupts-mac2
-      - description: interrupt event for ring ppdu-end-interrupts-mac1
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
-      - description: interrupt event for ring rxdma2host-destination-ring-mac3
-      - description: interrupt event for ring rxdma2host-destination-ring-mac2
-      - description: interrupt event for ring rxdma2host-destination-ring-mac1
-      - description: interrupt event for ring host2tcl-input-ring4
-      - description: interrupt event for ring host2tcl-input-ring3
-      - description: interrupt event for ring host2tcl-input-ring2
-      - description: interrupt event for ring host2tcl-input-ring1
-      - description: interrupt event for ring wbm2host-tx-completions-ring3
-      - description: interrupt event for ring wbm2host-tx-completions-ring2
-      - description: interrupt event for ring wbm2host-tx-completions-ring1
-      - description: interrupt event for ring tcl2host-status-ring
-
+    minItems: 32
+    maxItems: 52
 
   interrupt-names:
-    items:
-      - const: misc-pulse1
-      - const: misc-latch
-      - const: sw-exception
-      - const: watchdog
-      - const: ce0
-      - const: ce1
-      - const: ce2
-      - const: ce3
-      - const: ce4
-      - const: ce5
-      - const: ce6
-      - const: ce7
-      - const: ce8
-      - const: ce9
-      - const: ce10
-      - const: ce11
-      - const: host2wbm-desc-feed
-      - const: host2reo-re-injection
-      - const: host2reo-command
-      - const: host2rxdma-monitor-ring3
-      - const: host2rxdma-monitor-ring2
-      - const: host2rxdma-monitor-ring1
-      - const: reo2ost-exception
-      - const: wbm2host-rx-release
-      - const: reo2host-status
-      - const: reo2host-destination-ring4
-      - const: reo2host-destination-ring3
-      - const: reo2host-destination-ring2
-      - const: reo2host-destination-ring1
-      - const: rxdma2host-monitor-destination-mac3
-      - const: rxdma2host-monitor-destination-mac2
-      - const: rxdma2host-monitor-destination-mac1
-      - const: ppdu-end-interrupts-mac3
-      - const: ppdu-end-interrupts-mac2
-      - const: ppdu-end-interrupts-mac1
-      - const: rxdma2host-monitor-status-ring-mac3
-      - const: rxdma2host-monitor-status-ring-mac2
-      - const: rxdma2host-monitor-status-ring-mac1
-      - const: host2rxdma-host-buf-ring-mac3
-      - const: host2rxdma-host-buf-ring-mac2
-      - const: host2rxdma-host-buf-ring-mac1
-      - const: rxdma2host-destination-ring-mac3
-      - const: rxdma2host-destination-ring-mac2
-      - const: rxdma2host-destination-ring-mac1
-      - const: host2tcl-input-ring4
-      - const: host2tcl-input-ring3
-      - const: host2tcl-input-ring2
-      - const: host2tcl-input-ring1
-      - const: wbm2host-tx-completions-ring3
-      - const: wbm2host-tx-completions-ring2
-      - const: wbm2host-tx-completions-ring1
-      - const: tcl2host-status-ring
+    maxItems: 52
 
   qcom,rproc:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -151,20 +48,217 @@ properties:
       board-2.bin for designs with colliding bus and device specific ids
 
   memory-region:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
     description:
       phandle to a node describing reserved memory (System RAM memory)
       used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
 
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  wifi-firmware:
+    type: object
+    description: |
+      WCN6750 wifi node can contain one optional firmware subnode.
+      Firmware subnode is needed when the platform does not have Trustzone.
+    required:
+      - iommus
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the WLAN Q6.
+    items:
+      - description: Signal bits used to enable/disable low power mode
+                     on WCN6750 in the case of WoW (Wake on Wireless).
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output.
+    items:
+      - const: wlan-smp2p-out
+
 required:
   - compatible
   - reg
   - interrupts
-  - interrupt-names
   - qcom,rproc
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: misc-pulse1 interrupt events
+            - description: misc-latch interrupt events
+            - description: sw exception interrupt events
+            - description: watchdog interrupt events
+            - description: interrupt event for ring CE0
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring CE11
+            - description: interrupt event for ring host2wbm-desc-feed
+            - description: interrupt event for ring host2reo-re-injection
+            - description: interrupt event for ring host2reo-command
+            - description: interrupt event for ring host2rxdma-monitor-ring3
+            - description: interrupt event for ring host2rxdma-monitor-ring2
+            - description: interrupt event for ring host2rxdma-monitor-ring1
+            - description: interrupt event for ring reo2ost-exception
+            - description: interrupt event for ring wbm2host-rx-release
+            - description: interrupt event for ring reo2host-status
+            - description: interrupt event for ring reo2host-destination-ring4
+            - description: interrupt event for ring reo2host-destination-ring3
+            - description: interrupt event for ring reo2host-destination-ring2
+            - description: interrupt event for ring reo2host-destination-ring1
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+            - description: interrupt event for ring ppdu-end-interrupts-mac3
+            - description: interrupt event for ring ppdu-end-interrupts-mac2
+            - description: interrupt event for ring ppdu-end-interrupts-mac1
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+            - description: interrupt event for ring rxdma2host-destination-ring-mac3
+            - description: interrupt event for ring rxdma2host-destination-ring-mac2
+            - description: interrupt event for ring rxdma2host-destination-ring-mac1
+            - description: interrupt event for ring host2tcl-input-ring4
+            - description: interrupt event for ring host2tcl-input-ring3
+            - description: interrupt event for ring host2tcl-input-ring2
+            - description: interrupt event for ring host2tcl-input-ring1
+            - description: interrupt event for ring wbm2host-tx-completions-ring3
+            - description: interrupt event for ring wbm2host-tx-completions-ring2
+            - description: interrupt event for ring wbm2host-tx-completions-ring1
+            - description: interrupt event for ring tcl2host-status-ring
+        interrupt-names:
+          items:
+            - const: misc-pulse1
+            - const: misc-latch
+            - const: sw-exception
+            - const: watchdog
+            - const: ce0
+            - const: ce1
+            - const: ce2
+            - const: ce3
+            - const: ce4
+            - const: ce5
+            - const: ce6
+            - const: ce7
+            - const: ce8
+            - const: ce9
+            - const: ce10
+            - const: ce11
+            - const: host2wbm-desc-feed
+            - const: host2reo-re-injection
+            - const: host2reo-command
+            - const: host2rxdma-monitor-ring3
+            - const: host2rxdma-monitor-ring2
+            - const: host2rxdma-monitor-ring1
+            - const: reo2ost-exception
+            - const: wbm2host-rx-release
+            - const: reo2host-status
+            - const: reo2host-destination-ring4
+            - const: reo2host-destination-ring3
+            - const: reo2host-destination-ring2
+            - const: reo2host-destination-ring1
+            - const: rxdma2host-monitor-destination-mac3
+            - const: rxdma2host-monitor-destination-mac2
+            - const: rxdma2host-monitor-destination-mac1
+            - const: ppdu-end-interrupts-mac3
+            - const: ppdu-end-interrupts-mac2
+            - const: ppdu-end-interrupts-mac1
+            - const: rxdma2host-monitor-status-ring-mac3
+            - const: rxdma2host-monitor-status-ring-mac2
+            - const: rxdma2host-monitor-status-ring-mac1
+            - const: host2rxdma-host-buf-ring-mac3
+            - const: host2rxdma-host-buf-ring-mac2
+            - const: host2rxdma-host-buf-ring-mac1
+            - const: rxdma2host-destination-ring-mac3
+            - const: rxdma2host-destination-ring-mac2
+            - const: rxdma2host-destination-ring-mac1
+            - const: host2tcl-input-ring4
+            - const: host2tcl-input-ring3
+            - const: host2tcl-input-ring2
+            - const: host2tcl-input-ring1
+            - const: wbm2host-tx-completions-ring3
+            - const: wbm2host-tx-completions-ring2
+            - const: wbm2host-tx-completions-ring1
+            - const: tcl2host-status-ring
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring DP1
+            - description: interrupt event for ring DP2
+            - description: interrupt event for ring DP3
+            - description: interrupt event for ring DP4
+            - description: interrupt event for ring DP5
+            - description: interrupt event for ring DP6
+            - description: interrupt event for ring DP7
+            - description: interrupt event for ring DP8
+            - description: interrupt event for ring DP9
+            - description: interrupt event for ring DP10
+            - description: interrupt event for ring DP11
+            - description: interrupt event for ring DP12
+            - description: interrupt event for ring DP13
+            - description: interrupt event for ring DP14
+            - description: interrupt event for ring DP15
+            - description: interrupt event for ring DP16
+            - description: interrupt event for ring DP17
+            - description: interrupt event for ring DP18
+            - description: interrupt event for ring DP19
+            - description: interrupt event for ring DP20
+            - description: interrupt event for ring DP21
+            - description: interrupt event for ring DP22
+
 examples:
   - |
 
@@ -302,10 +396,73 @@ examples:
         pcie0 {
             #size-cells = <2>;
             #address-cells = <3>;
- 
+
             wifi_0: wifi@0 {
                 reg = <0 0 0 0 0>;
                 memory-region = <&qcn9074_0>;
             };
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wlan_ce_mem: memory@4cd000 {
+            no-map;
+            reg = <0x0 0x004cd000 0x0 0x1000>;
+        };
+
+        wlan_fw_mem: memory@80c00000 {
+            no-map;
+            reg = <0x0 0x80c00000 0x0 0xc00000>;
+        };
+    };
+
+    wifi: wifi@17a10040 {
+        compatible = "qcom,wcn6750-wifi";
+        reg = <0x17a10040 0x0>;
+        iommus = <&apps_smmu 0x1c00 0x1>;
+        interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+        qcom,rproc = <&remoteproc_wpss>;
+        memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+        qcom,smem-states = <&wlan_smp2p_out 0>;
+        qcom,smem-state-names = "wlan-smp2p-out";
+        wifi-firmware {
+                iommus = <&apps_smmu 0x1c02 0x1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
new file mode 100644
index 000000000000..b35d2f3ad1ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020, Silicon Laboratories, Inc.
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs WFxxx devicetree bindings
+
+maintainers:
+  - Jérôme Pouiller <jerome.pouiller@silabs.com>
+
+description: >
+  Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device
+  from the WFxxx series is the WF200 described here:
+     https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
+
+  The WF200 can be connected via SPI or via SDIO.
+
+  For SDIO:
+
+    Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is
+    sufficient for the SDIO devices).
+
+    It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without
+    it, you may encounter issues during reboot. The mmc-pwrseq should be
+    compatible with mmc-pwrseq-simple. Please consult
+    Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
+    information.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - prt,prtt1c-wfm200 # Protonic PRTT1C Board
+          - silabs,brd4001a # WGM160P Evaluation Board
+          - silabs,brd8022a # WF200 Evaluation Board
+          - silabs,brd8023a # WFM200 Evaluation Board
+      - const: silabs,wf200 # Chip alone without antenna
+
+  reg:
+    description:
+      When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is
+      the chip select address of the device as defined in the SPI devices
+      bindings.
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
+      used, this property is required. When SDIO is used, the "in-band"
+      interrupt provided by the SDIO bus is used unless an interrupt is defined
+      in the Device Tree.
+    maxItems: 1
+
+  reset-gpios:
+    description: (SPI only) Phandle of gpio that will be used to reset chip
+      during probe. Without this property, you may encounter issues with warm
+      boot.
+
+      For SDIO, the reset gpio should declared using a mmc-pwrseq.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: Phandle of gpio that will be used to wake-up chip. Without this
+      property, driver will disable most of power saving features.
+    maxItems: 1
+
+  silabs,antenna-config-file:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Use an alternative file for antenna configuration (aka
+      "Platform Data Set" in Silabs jargon). Default depends of "compatible"
+      string. For "silabs,wf200", the default is 'wf200.pds'.
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@0 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_irq &wfx_gpios>;
+            reg = <0>;
+            interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <42000000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wfx_pwrseq: wfx_pwrseq {
+        compatible = "mmc-pwrseq-simple";
+        pinctrl-names = "default";
+        pinctrl-0 = <&wfx_reset>;
+        reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+    };
+
+    mmc {
+        mmc-pwrseq = <&wfx_pwrseq>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_wakeup>;
+            reg = <1>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
index 8dd164d10290..e31456730e9f 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -36,8 +36,6 @@ properties:
       This is required when connected via SPI, and optional when connected via
       SDIO.
 
-  spi-max-frequency: true
-
   interrupts:
     minItems: 1
     maxItems: 2
@@ -54,9 +52,11 @@ properties:
 
 
   ref-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Reference clock frequency.
 
   tcxo-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: TCXO clock frequency.
 
   clock-xtal:
@@ -67,20 +67,22 @@ required:
   - compatible
   - interrupts
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - ti,wl1271
-          - ti,wl1273
-          - ti,wl1281
-          - ti,wl1283
-then:
-  required:
-    - ref-clock-frequency
-
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,wl1271
+              - ti,wl1273
+              - ti,wl1281
+              - ti,wl1283
+    then:
+      required:
+        - ref-clock-frequency
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index b8e4894bc634..1aa4c6006cd0 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -26,7 +26,8 @@ Required properties:
 		  specified, the TX/RX DMA interrupts should be on that node
 		  instead, and only the Ethernet core interrupt is optionally
 		  specified here.
-- phy-handle	: Should point to the external phy device.
+- phy-handle	: Should point to the external phy device if exists. Pointing
+		  this to the PCS/PMA PHY is deprecated and should be avoided.
 		  See ethernet.txt file in the same directory.
 - xlnx,rxmem	: Set to allocated memory buffer for Rx/Tx in the hardware
 
@@ -68,6 +69,11 @@ Optional properties:
 		  required through the core's MDIO interface (i.e. always,
 		  unless the PHY is accessed through a different bus).
 
+ - pcs-handle: 	  Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+		  modes, where "pcs-handle" should be used to point
+		  to the PCS/PMA PHY, and "phy-handle" should point to an
+		  external PHY if exists.
+
 Example:
 	axi_ethernet_eth: ethernet@40c00000 {
 		compatible = "xlnx,axi-ethernet-1.00.a";
diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
new file mode 100644
index 000000000000..92d8ade988f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,emaclite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Emaclite Ethernet controller
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+  - Harini Katakam <harini.katakam@amd.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,opb-ethernetlite-1.01.a
+      - xlnx,opb-ethernetlite-1.01.b
+      - xlnx,xps-ethernetlite-1.00.a
+      - xlnx,xps-ethernetlite-2.00.a
+      - xlnx,xps-ethernetlite-2.01.a
+      - xlnx,xps-ethernetlite-3.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-handle: true
+
+  local-mac-address: true
+
+  xlnx,tx-ping-pong:
+    type: boolean
+    description: hardware supports tx ping pong buffer.
+
+  xlnx,rx-ping-pong:
+    type: boolean
+    description: hardware supports rx ping pong buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_ethernetlite_1: ethernet@40e00000 {
+        compatible = "xlnx,xps-ethernetlite-3.00.a";
+        reg = <0x40e00000 0x10000>;
+        interrupt-parent = <&axi_intc_1>;
+        interrupts = <1>;
+        local-mac-address = [00 00 00 00 00 00];
+        phy-handle = <&phy0>;
+        xlnx,rx-ping-pong;
+        xlnx,tx-ping-pong;
+    };
diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
new file mode 100644
index 000000000000..34dd1cc67124
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ANS NVM Express host controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-nvme-ans2
+          - apple,t6000-nvme-ans2
+      - const: apple,nvme-ans2
+
+  reg:
+    items:
+      - description: NVMe and NVMMU registers
+      - description: ANS2 co-processor control registers
+
+  reg-names:
+    items:
+      - const: nvme
+      - const: ans
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    # two domains for t8103, three for t6000
+    minItems: 2
+    items:
+      - description: power domain for the NVMe controller.
+      - description: power domain for the first PCIe bus connecting the NVMe
+          controller to the storage modules.
+      - description: optional power domain for the second PCIe bus
+          connecting the NVMe controller to the storage modules.
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: ans
+      - const: apcie0
+      - const: apcie1
+
+  mboxes:
+    maxItems: 1
+    description: Mailbox of the ANS2 co-processor
+
+  interrupts:
+    maxItems: 1
+
+  apple,sart:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to the SART address filter.
+
+      The SART address filter is documented in iommu/apple,sart.yaml.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: apple,t8103-nvme-ans2
+then:
+  properties:
+    power-domains:
+      maxItems: 2
+    power-domain-names:
+      maxItems: 2
+else:
+  properties:
+    power-domains:
+      minItems: 3
+    power-domain-names:
+      minItems: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - power-domains
+  - power-domain-names
+  - mboxes
+  - interrupts
+  - apple,sart
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    nvme@7bcc0000 {
+      compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+      reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>;
+      reg-names = "nvme", "ans";
+      interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+      mboxes = <&ans>;
+      apple,sart = <&sart>;
+      power-domains = <&ps_ans2>, <&ps_apcie_st>;
+      power-domain-names = "ans", "apcie0";
+      resets = <&ps_ans2>;
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index 6687ab720304..14c170c6a86e 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security ID Device Tree Bindings
+title: Allwinner A10 Security ID
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,6 +20,7 @@ properties:
       - const: allwinner,sun7i-a20-sid
       - const: allwinner,sun8i-a83t-sid
       - const: allwinner,sun8i-h3-sid
+      - const: allwinner,sun20i-d1-sid
       - const: allwinner,sun50i-a64-sid
       - items:
           - const: allwinner,sun50i-a100-sid
diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
new file mode 100644
index 000000000000..5ec8f2bdb3a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/apple,efuses.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC eFuse-based NVMEM
+
+description: |
+  Apple SoCs such as the M1 contain factory-programmed eFuses used to e.g. store
+  calibration data for the PCIe and the Type-C PHY or unique chip identifiers
+  such as the ECID.
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-efuses
+          - apple,t6000-efuses
+      - const: apple,efuses
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@3d2bc000 {
+        compatible = "apple,t8103-efuses", "apple,efuses";
+        reg = <0x3d2bc000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ecid: efuse@500 {
+            reg = <0x500 0x8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
index 58ff6b0bdb1a..25033de3ef6b 100644
--- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -14,6 +14,8 @@ description: |
   NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
   devices usiong I/O mapped memory.
 
+  NVRAM variables can be defined as NVMEM device subnodes.
+
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
@@ -24,11 +26,33 @@ properties:
   compatible:
     const: brcm,nvram
 
+  reg:
+    maxItems: 1
+
+  board_id:
+    type: object
+    description: Board identification name
+
+  et0macaddr:
+    type: object
+    description: First Ethernet interface's MAC address
+
+  et1macaddr:
+    type: object
+    description: Second Ethernet interface's MAC address
+
+  et2macaddr:
+    type: object
+    description: Third Ethernet interface's MAC address
+
 unevaluatedProperties: false
 
 examples:
   - |
     nvram@1eff0000 {
-            compatible = "brcm,nvram";
-            reg = <0x1eff0000 0x10000>;
+        compatible = "brcm,nvram";
+        reg = <0x1eff0000 0x10000>;
+
+        mac: et0macaddr {
+        };
     };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
new file mode 100644
index 000000000000..3b4e6e94cb81
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,layerscape-sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Security Fuse Processor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  SFP is the security fuse processor which among other things provides a
+  unique identifier per part.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - description: Trust architecture 2.1 SFP
+        items:
+          - const: fsl,ls1021a-sfp
+      - description: Trust architecture 3.0 SFP
+        items:
+          - const: fsl,ls1028a-sfp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      The SFP clock. Typically, this is the platform clock divided by 4.
+
+  clock-names:
+    const: sfp
+
+  ta-prog-sfp-supply:
+    description:
+      The regulator for the TA_PROG_SFP pin. It will be enabled for programming
+      and disabled for reading.
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+    efuse@1e80000 {
+        compatible = "fsl,ls1028a-sfp";
+        reg = <0x1e80000 0x8000>;
+        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+                            QORIQ_CLK_PLL_DIV(4)>;
+        clock-names = "sfp";
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
new file mode 100644
index 000000000000..682688299b26
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - OCOTP bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-scu-ocotp
+      - fsl,imx8qxp-scu-ocotp
+
+patternProperties:
+  '^mac@[0-9a-f]*$':
+    type: object
+    description:
+      MAC address.
+
+    properties:
+      reg:
+        description:
+          Byte offset within OCOTP where the MAC address is stored
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ocotp {
+        compatible = "fsl,imx8qxp-scu-ocotp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fec_mac0: mac@2c4 {
+            reg = <0x2c4 6>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
index 9cc43e7a4b38..7aac1995cfaf 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX IC Identification Module (IIM) device tree bindings
+title: Freescale i.MX IC Identification Module (IIM)
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index 8a43dc1283fe..d0a239d7e199 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
+title: Freescale i.MX6 On-Chip OTP Controller (OCOTP)
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
new file mode 100644
index 000000000000..75e0a516e59a
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek efuse
+
+description: |
+  MediaTek's efuse is used for storing calibration data, it can be accessed
+  on ARM devices usiong I/O mapped memory.
+
+maintainers:
+  - Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+  - Lala Lin <lala.lin@mediatek.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  $nodename:
+    pattern: "^efuse@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7622-efuse
+              - mediatek,mt7623-efuse
+              - mediatek,mt8173-efuse
+              - mediatek,mt8183-efuse
+              - mediatek,mt8186-efuse
+              - mediatek,mt8188-efuse
+              - mediatek,mt8192-efuse
+              - mediatek,mt8195-efuse
+              - mediatek,mt8516-efuse
+          - const: mediatek,efuse
+      - const: mediatek,mt8173-efuse
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@11c10000 {
+        compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+        reg = <0x11c10000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        u3_tx_imp_p0: usb3-tx-imp@184,1 {
+            reg = <0x184 0x1>;
+            bits = <0 5>;
+        };
+        u3_rx_imp_p0: usb3-rx-imp@184,2 {
+            reg = <0x184 0x2>;
+            bits = <5 5>;
+        };
+        u3_intr_p0: usb3-intr@185 {
+            reg = <0x185 0x1>;
+            bits = <2 6>;
+        };
+        comb_tx_imp_p1: usb3-tx-imp@186,1 {
+            reg = <0x186 0x1>;
+            bits = <0 5>;
+        };
+        comb_rx_imp_p1: usb3-rx-imp@186,2 {
+            reg = <0x186 0x2>;
+            bits = <5 5>;
+        };
+        comb_intr_p1: usb3-intr@187 {
+            reg = <0x187 0x1>;
+            bits = <2 6>;
+        };
+        u2_intr_p0: usb2-intr-p0@188,1 {
+            reg = <0x188 0x1>;
+            bits = <0 5>;
+        };
+        u2_intr_p1: usb2-intr-p1@188,2 {
+            reg = <0x188 0x2>;
+            bits = <5 5>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
new file mode 100644
index 000000000000..f97c6beb4766
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN9662 OTP Controller (OTPC)
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. hardware configuration settings, chip identifiers) or
+  user specific data could be stored.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,lan9668-otpc
+          - const: microchip,lan9662-otpc
+      - enum:
+          - microchip,lan9662-otpc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otpc: otp@e0021000 {
+        compatible = "microchip,lan9662-otpc";
+        reg = <0xe0021000 0x300>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
new file mode 100644
index 000000000000..c3c96fd0baac
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,sama7g5-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAMA7G5 OTP Controller (OTPC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. calibration data for analog cells, hardware configuration
+  settings, chip identifiers) or user specific data could be stored.
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sama7g5-otpc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+
+    otpc: efuse@e8c00000 {
+        compatible = "microchip,sama7g5-otpc", "syscon";
+        reg = <0xe8c00000 0xec>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        temperature_calib: calib@1 {
+            reg = <OTP_PKT(1) 76>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
deleted file mode 100644
index b6791702bcfc..000000000000
--- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-= Mediatek MTK-EFUSE device tree bindings =
-
-This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs.
-
-Required properties:
-- compatible: should be
-	      "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622
-	      "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623
-	      "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
-	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
-	      "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
-- reg: Should contain registers location and length
-
-= Data cells =
-Are child nodes of MTK-EFUSE, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	efuse: efuse@10206000 {
-		compatible = "mediatek,mt8173-efuse";
-		reg	   = <0 0x10206000 0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* Data cells */
-		thermal_calibration: calib@528 {
-			reg = <0x528 0xc>;
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-
-	thermal {
-		...
-		nvmem-cells = <&thermal_calibration>;
-		nvmem-cell-names = "calibration";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
index dbe4ffdd644c..f93bc50c40d7 100644
--- a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nintendo-otp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Nintendo Wii and Wii U OTP Device Tree Bindings
+title: Nintendo Wii and Wii U OTP
 
 description: |
   This binding represents the OTP memory as found on a Nintendo Wii or Wii U,
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
index b1da238c8bcb..a26633bf52db 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml#
 $schema: http://devicetree.org/meta-schemas/base.yaml#
 
-title: NVMEM (Non Volatile Memory) Consumer Device Tree Bindings
+title: NVMEM (Non Volatile Memory) Consumer
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 456fb808100a..1eb22dba364c 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nvmem.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVMEM (Non Volatile Memory) Device Tree Bindings
+title: NVMEM (Non Volatile Memory)
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -50,19 +50,15 @@ patternProperties:
           Offset and size in bytes within the storage device.
 
       bits:
-        maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
-
-    required:
-      - reg
+          - minimum: 0
+            maximum: 7
+            description:
+              Offset in bit within the address range specified by reg.
+          - minimum: 1
+            description:
+              Size in bit within the address range specified by reg.
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index dede8892ee01..2eab2f46cb65 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -18,6 +18,7 @@ properties:
       - enum:
           - qcom,apq8064-qfprom
           - qcom,apq8084-qfprom
+          - qcom,ipq8064-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8996-qfprom
@@ -25,7 +26,9 @@ properties:
           - qcom,qcs404-qfprom
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom
+          - qcom,sdm630-qfprom
           - qcom,sdm845-qfprom
+          - qcom,sm6115-qfprom
       - const: qcom,qfprom
 
   reg:
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index a835e64bc6f5..ee79e13b5fe0 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -38,34 +38,6 @@ required:
   - reg
   - ranges
 
-patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-
-    properties:
-      reg:
-        maxItems: 1
-        description:
-          Offset and size in bytes within the storage device.
-
-      bits:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        maxItems: 1
-        items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
-
-    required:
-      - reg
-
-    additionalProperties: false
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
index 1d85a0a30846..a4a755dcfc43 100644
--- a/Documentation/devicetree/bindings/nvmem/rmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -19,6 +19,9 @@ properties:
           - raspberrypi,bootloader-config
       - const: nvmem-rmem
 
+  reg:
+    maxItems: 1
+
   no-map:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
index 104dd508565e..febee8129aa9 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip eFuse device tree bindings
+title: Rockchip eFuse
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
index c819f0e90320..e374aa7891ae 100644
--- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
@@ -15,6 +15,10 @@ properties:
       - fsl,imx6q-snvs-lpgpr
       - fsl,imx6ul-snvs-lpgpr
       - fsl,imx7d-snvs-lpgpr
+      - fsl,imx8mm-snvs-lpgpr
+      - fsl,imx8mn-snvs-lpgpr
+      - fsl,imx8mp-snvs-lpgpr
+      - fsl,imx8mq-snvs-lpgpr
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index a48c8fa56bce..448a2678dc62 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -24,6 +24,9 @@ properties:
       - st,stm32f4-otp
       - st,stm32mp15-bsec
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
new file mode 100644
index 000000000000..a7644ebbc2ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/sunplus,sp7021-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Sunplus SP7021
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+allOf:
+  - $ref: "nvmem.yaml#"
+
+properties:
+  compatible:
+    const: sunplus,sp7021-ocotp
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hb_gpio
+      - const: otprx
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  thermal-calibration:
+    type: object
+    description: thermal calibration values
+
+  disconnect-voltage:
+    type: object
+    description: disconnect voltages of usb2 port 0 and port 1
+
+  mac-address0:
+    type: object
+    description: MAC address of ethernet port 0
+
+  mac-address1:
+    type: object
+    description: MAC address of ethernet port 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp: otp@9c00af00 {
+        compatible = "sunplus,sp7021-ocotp";
+        reg = <0x9c00af00 0x34>, <0x9c00af80 0x58>;
+        reg-names = "hb_gpio", "otprx";
+        clocks = <&clkc 0x15>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        therm_calib: thermal-calibration@14 {
+          reg = <0x14 0x3>;
+        };
+        disc_vol: disconnect-voltage@18 {
+          reg = <0x18 0x2>;
+        };
+        mac_addr0: mac-address0@34 {
+          reg = <0x34 0x6>;
+        };
+        mac_addr1: mac-address1@3a {
+          reg = <0x3a 0x6>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
new file mode 100644
index 000000000000..e96bca99f2d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot environment variables
+
+description: |
+  U-Boot uses environment variables to store device parameters and
+  configuration. They may be used for booting process, setup or keeping end user
+  info.
+
+  Data is stored using U-Boot specific formats (variant specific header and NUL
+  separated key-value pairs).
+
+  Environment data can be stored on various storage entities, e.g.:
+  1. Raw flash partition
+  2. UBI volume
+
+  This binding allows marking storage device (as containing env data) and
+  specifying used format.
+
+  Right now only flash partition case is covered but it may be extended to e.g.
+  UBI volumes in the future.
+
+  Variables can be defined as NVMEM device subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - description: A standalone env data block
+        const: u-boot,env
+      - description: Two redundant blocks with active one flagged
+        const: u-boot,env-redundant-bool
+      - description: Two redundant blocks with active having higher counter
+        const: u-boot,env-redundant-count
+
+  reg:
+    maxItems: 1
+
+  bootcmd:
+    type: object
+    description: Command to use for automatic booting
+
+  ethaddr:
+    type: object
+    description: Ethernet interface's MAC address
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x40000>;
+            label = "u-boot";
+            read-only;
+        };
+
+        env: partition@40000 {
+            compatible = "u-boot,env";
+            reg = <0x40000 0x10000>;
+
+            mac: ethaddr {
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index 729ae97b63d9..385b0692261c 100644
--- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 CPU OPP Device Tree Bindings
+title: Allwinner H6 CPU OPP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
index 15a76bcd6d42..66d0ec763f0b 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -50,6 +50,16 @@ patternProperties:
           property to uniquely identify the OPP nodes exists. Devices like power
           domains must have another (implementation dependent) property.
 
+          Entries for multiple clocks shall be provided in the same field, as
+          array of frequencies.  The OPP binding doesn't provide any provisions
+          to relate the values to their clocks or the order in which the clocks
+          need to be configured and that is left for the implementation
+          specific binding.
+        minItems: 1
+        maxItems: 16
+        items:
+          maxItems: 1
+
       opp-microvolt:
         description: |
           Voltage for the OPP
@@ -93,6 +103,21 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      opp-microwatt:
+        description: |
+          The power for the OPP in micro-Watts.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If power values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
       opp-level:
         description:
           A value representing the performance level of the device.
@@ -177,6 +202,8 @@ patternProperties:
           for the functioning of the current device at the current OPP (where
           this property is present).
         $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
 
     patternProperties:
       '^opp-microvolt-':
@@ -203,6 +230,14 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      '^opp-microwatt':
+        description:
+          Named opp-microwatt property. Similar to opp-microamp property,
+          but for microwatt instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
     dependencies:
       opp-avg-kBps: [ opp-peak-kBps ]
 
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
new file mode 100644
index 000000000000..a202b6c6561d
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM OPP bindings
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
+  the CPU frequencies subset and voltage value of each OPP varies based on
+  the silicon variant in use.
+  Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+  defines the voltage and frequency value based on the speedbin blown in
+  the efuse combination.
+  The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
+  the OPP framework with required information (existing HW bitmap).
+  This is used to determine the voltage and frequency value for each OPP of
+  operating-points-v2 table when it is parsed by the OPP framework.
+
+properties:
+  compatible:
+    const: operating-points-v2-kryo-cpu
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the
+      efuse registers that has information about the
+      speedbin that is used to select the right frequency/voltage
+      value pair.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-hz: true
+
+      opp-microvolt: true
+
+      opp-supported-hw:
+        description: |
+          A single 32 bit bitmap value, representing compatible HW.
+          Bitmap:
+          0:  MSM8996, speedbin 0
+          1:  MSM8996, speedbin 1
+          2:  MSM8996, speedbin 2
+          3-31:  unused
+        maximum: 0x7
+
+      clock-latency-ns: true
+
+      required-opps: true
+
+    required:
+      - opp-hz
+
+required:
+  - compatible
+
+if:
+  required:
+    - nvmem-cells
+then:
+  patternProperties:
+    '^opp-?[0-9]+$':
+      required:
+        - opp-supported-hw
+
+additionalProperties: false
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. DB820c";
+        compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x0>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+                L2_0: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                };
+            };
+
+            CPU1: cpu@1 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x1>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+            };
+
+            CPU2: cpu@100 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+                L2_1: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                };
+            };
+
+            CPU3: cpu@101 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+            };
+
+            cpu-map {
+                cluster0 {
+                    core0 {
+                        cpu = <&CPU0>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU1>;
+                    };
+                };
+
+                cluster1 {
+                    core0 {
+                        cpu = <&CPU2>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU3>;
+                    };
+                };
+            };
+        };
+
+        cluster0_opp: opp-table-0 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x5>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cluster1_opp: opp-table-1 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1804800000 {
+                opp-hz = /bits/ 64 <1804800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x6>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp4>;
+            };
+            opp-1900800000 {
+                opp-hz = /bits/ 64 <1900800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x4>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp5>;
+            };
+            opp-2150400000 {
+                opp-hz = /bits/ 64 <2150400000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp6>;
+            };
+        };
+
+        smem {
+            compatible = "qcom,smem";
+            memory-region = <&smem_mem>;
+            hwlocks = <&tcsr_mutex 3>;
+        };
+
+        soc {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            qfprom: qfprom@74000 {
+                compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+                reg = <0x00074000 0x8ff>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                speedbin_efuse: speedbin@133 {
+                    reg = <0x133 0x1>;
+                    bits = <5 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
new file mode 100644
index 000000000000..df8442fb11f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm OPP bindings to describe OPP nodes.
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-qcom-level
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-level: true
+
+      qcom,opp-fuse-level:
+        description: |
+          A positive value representing the fuse corner/level associated with
+          this OPP node. Sometimes several corners/levels shares a certain fuse
+          corner/level. A fuse corner/level contains e.g. ref uV, min uV,
+          and max uV.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - opp-level
+      - qcom,opp-fuse-level
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
deleted file mode 100644
index 64f07417ecfb..000000000000
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ /dev/null
@@ -1,796 +0,0 @@
-Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings
-===================================
-
-In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996,
-the CPU frequencies subset and voltage value of each OPP varies based on
-the silicon variant in use.
-Qualcomm Technologies, Inc. Process Voltage Scaling Tables
-defines the voltage and frequency value based on the msm-id in SMEM
-and speedbin blown in the efuse combination.
-The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
-to provide the OPP framework with required information (existing HW bitmap).
-This is used to determine the voltage and frequency value for each OPP of
-operating-points-v2 table when it is parsed by the OPP framework.
-
-Required properties:
---------------------
-In 'cpu' nodes:
-- operating-points-v2: Phandle to the operating-points-v2 table to use.
-
-In 'operating-points-v2' table:
-- compatible: Should be
-	- 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
-					     apq8064, ipq8064, msm8960 and ipq8074.
-
-Optional properties:
---------------------
-In 'cpu' nodes:
-- power-domains: A phandle pointing to the PM domain specifier which provides
-		the performance states available for active state management.
-		Please refer to the power-domains bindings
-		Documentation/devicetree/bindings/power/power_domain.txt
-		and also examples below.
-- power-domain-names: Should be
-	- 'cpr' for qcs404.
-
-In 'operating-points-v2' table:
-- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
-		efuse registers that has information about the
-		speedbin that is used to select the right frequency/voltage
-		value pair.
-		Please refer the for nvmem-cells
-		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
-		and also examples below.
-
-In every OPP node:
-- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
-		    Bitmap:
-			0:	MSM8996 V3, speedbin 0
-			1:	MSM8996 V3, speedbin 1
-			2:	MSM8996 V3, speedbin 2
-			3:	unused
-			4:	MSM8996 SG, speedbin 0
-			5:	MSM8996 SG, speedbin 1
-			6:	MSM8996 SG, speedbin 2
-			7-31:	unused
-
-Example 1:
----------
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			clocks = <&kryocc 0>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			};
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			clocks = <&kryocc 0>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-		};
-
-		CPU2: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			clocks = <&kryocc 1>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			};
-		};
-
-		CPU3: cpu@101 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x101>;
-			enable-method = "psci";
-			clocks = <&kryocc 1>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-		};
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-
-				core1 {
-					cpu = <&CPU1>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&CPU2>;
-				};
-
-				core1 {
-					cpu = <&CPU3>;
-				};
-			};
-		};
-	};
-
-	cluster0_opp: opp_table0 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-422400000 {
-			opp-hz = /bits/ 64 <422400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-460800000 {
-			opp-hz = /bits/ 64 <460800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-537600000 {
-			opp-hz = /bits/ 64 <537600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-614400000 {
-			opp-hz = /bits/ 64 <614400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-691200000 {
-			opp-hz = /bits/ 64 <691200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-768000000 {
-			opp-hz = /bits/ 64 <768000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-844800000 {
-			opp-hz = /bits/ 64 <844800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-960000000 {
-			opp-hz = /bits/ 64 <960000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1228800000 {
-			opp-hz = /bits/ 64 <1228800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x5>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x72>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x5>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1440000000 {
-			opp-hz = /bits/ 64 <1440000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1497600000 {
-			opp-hz = /bits/ 64 <1497600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x4>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x71>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x20>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2188800000 {
-			opp-hz = /bits/ 64 <2188800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-	};
-
-	cluster1_opp: opp_table1 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-403200000 {
-			opp-hz = /bits/ 64 <403200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-460800000 {
-			opp-hz = /bits/ 64 <460800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-537600000 {
-			opp-hz = /bits/ 64 <537600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-614400000 {
-			opp-hz = /bits/ 64 <614400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-691200000 {
-			opp-hz = /bits/ 64 <691200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-748800000 {
-			opp-hz = /bits/ 64 <748800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-806400000 {
-			opp-hz = /bits/ 64 <806400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-825600000 {
-			opp-hz = /bits/ 64 <825600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-883200000 {
-			opp-hz = /bits/ 64 <883200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-940800000 {
-			opp-hz = /bits/ 64 <940800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1440000000 {
-			opp-hz = /bits/ 64 <1440000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1555200000 {
-			opp-hz = /bits/ 64 <1555200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1632000000 {
-			opp-hz = /bits/ 64 <1632000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1670400000 {
-			opp-hz = /bits/ 64 <1670400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1708800000 {
-			opp-hz = /bits/ 64 <1708800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1747200000 {
-			opp-hz = /bits/ 64 <1747200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1785600000 {
-			opp-hz = /bits/ 64 <1785600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1804800000 {
-			opp-hz = /bits/ 64 <1804800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x6>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1824000000 {
-			opp-hz = /bits/ 64 <1824000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x71>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1900800000 {
-			opp-hz = /bits/ 64 <1900800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x74>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1920000000 {
-			opp-hz = /bits/ 64 <1920000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1977600000 {
-			opp-hz = /bits/ 64 <1977600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x30>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2054400000 {
-			opp-hz = /bits/ 64 <2054400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x30>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2073600000 {
-			opp-hz = /bits/ 64 <2073600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2150400000 {
-			opp-hz = /bits/ 64 <2150400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x31>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2246400000 {
-			opp-hz = /bits/ 64 <2246400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2342400000 {
-			opp-hz = /bits/ 64 <2342400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-	};
-
-....
-
-reserved-memory {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-....
-	smem_mem: smem-mem@86000000 {
-		reg = <0x0 0x86000000 0x0 0x200000>;
-		no-map;
-	};
-....
-};
-
-smem {
-	compatible = "qcom,smem";
-	memory-region = <&smem_mem>;
-	hwlocks = <&tcsr_mutex 3>;
-};
-
-soc {
-....
-	qfprom: qfprom@74000 {
-		compatible = "qcom,qfprom";
-		reg = <0x00074000 0x8ff>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		....
-		speedbin_efuse: speedbin@133 {
-			reg = <0x133 0x1>;
-			bits = <5 3>;
-		};
-	};
-};
-
-Example 2:
----------
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x100>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU1: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x101>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU2: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x102>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU3: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x103>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-	};
-
-	cpu_opp_table: cpu-opp-table {
-		compatible = "operating-points-v2-kryo-cpu";
-		opp-shared;
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&cpr_opp1>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			required-opps = <&cpr_opp2>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			required-opps = <&cpr_opp3>;
-		};
-	};
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-....
-
-soc {
-....
-	cpr: power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		....
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		....
-	};
-};
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
deleted file mode 100644
index 41d3e4ff2dc3..000000000000
--- a/Documentation/devicetree/bindings/opp/qcom-opp.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm OPP bindings to describe OPP nodes
-
-The bindings are based on top of the operating-points-v2 bindings
-described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml
-Additional properties are described below.
-
-* OPP Table Node
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2-qcom-level"
-
-* OPP Node
-
-Required properties:
-- qcom,opp-fuse-level: A positive value representing the fuse corner/level
-  associated with this OPP node. Sometimes several corners/levels shares
-  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
-  min uV, and max uV.
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
index 7f01e15fc81c..aa38680aaaca 100644
--- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -68,6 +68,9 @@ properties:
   iommu-map: true
   iommu-map-mask: true
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -134,7 +137,7 @@ examples:
         ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
                  <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
 
-        power-domains = <&ps_apcie>, <&ps_apcie_gp>, <&ps_pcie_ref>;
+        power-domains = <&ps_apcie_gp>;
         pinctrl-0 = <&pcie_pins>;
         pinctrl-names = "default";
 
@@ -142,7 +145,6 @@ examples:
           device_type = "pci";
           reg = <0x0 0x0 0x0 0x0 0x0>;
           reset-gpios = <&pinctrl_ap 152 0>;
-          max-link-speed = <2>;
 
           #address-cells = <3>;
           #size-cells = <2>;
@@ -153,7 +155,6 @@ examples:
           device_type = "pci";
           reg = <0x800 0x0 0x0 0x0 0x0>;
           reset-gpios = <&pinctrl_ap 153 0>;
-          max-link-speed = <2>;
 
           #address-cells = <3>;
           #size-cells = <2>;
@@ -164,7 +165,6 @@ examples:
           device_type = "pci";
           reg = <0x1000 0x0 0x0 0x0 0x0>;
           reset-gpios = <&pinctrl_ap 33 0>;
-          max-link-speed = <1>;
 
           #address-cells = <3>;
           #size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
deleted file mode 100644
index df065aa53a83..000000000000
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-* Broadcom iProc PCIe controller with the platform bus interface
-
-Required properties:
-- compatible:
-      "brcm,iproc-pcie" for the first generation of PAXB based controller,
-used in SoCs including NSP, Cygnus, NS2, and Pegasus
-      "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
-controllers, used in Stingray
-      "brcm,iproc-pcie-paxc" for the first generation of PAXC based
-controller, used in NS2
-      "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
-controller, used in Stingray
-  PAXB-based root complex is used for external endpoint devices. PAXC-based
-root complex is connected to emulated endpoint devices internal to the ASIC
-- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-- bus-range: PCI bus numbers covered
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-
-Optional properties:
-- phys: phandle of the PCIe PHY device
-- phy-names: must be "pcie-phy"
-- dma-coherent: present if DMA operations are coherent
-- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
-  by the ASIC after power on reset.  In this case, SW is required to configure
-the mapping, based on inbound memory regions specified by this property.
-
-- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
-by the ASIC after power on reset. In this case, SW needs to configure it
-
-If the brcm,pcie-ob property is present, the following properties become
-effective:
-
-Required:
-- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
-address used by the iProc PCIe core (not the PCIe address)
-
-MSI support (optional):
-
-For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-an event queue based MSI support.  The iProc MSI uses host memories to store
-MSI posted writes in the event queues
-
-On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
-
-- msi-map: Maps a Requester ID to an MSI controller and associated MSI
-sideband data
-
-- msi-parent: Link to the device node of the MSI controller, used when no MSI
-sideband data is passed between the iProc PCIe controller and the MSI
-controller
-
-Refer to the following binding documents for more detailed description on
-the use of 'msi-map' and 'msi-parent':
-  Documentation/devicetree/bindings/pci/pci-msi.txt
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt
-
-When the iProc event queue based MSI is used, one needs to define the
-following properties in the MSI device node:
-- compatible: Must be "brcm,iproc-msi"
-- msi-controller: claims itself as an MSI controller
-- interrupts: List of interrupt IDs from its parent interrupt device
-
-Optional properties:
-- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-require the interrupt enable registers to be set explicitly to enable MSI
-
-Example:
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-		phys = <&phy 0 5>;
-		phy-names = "pcie-phy";
-
-		brcm,pcie-ob;
-		brcm,pcie-ob-axi-offset = <0x00000000>;
-
-		msi-parent = <&msi0>;
-
-		/* iProc event queue based MSI */
-		msi0: msi@18012000 {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-				     <GIC_SPI 97 IRQ_TYPE_NONE>,
-				     <GIC_SPI 98 IRQ_TYPE_NONE>,
-				     <GIC_SPI 99 IRQ_TYPE_NONE>,
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-		phys = <&phy 1 6>;
-		phy-names = "pcie-phy";
-	};
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 000000000000..0972868735fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  interrupt-map: true
+
+  interrupt-map-mask: true
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  bus-range: true
+
+  dma-coherent: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  device_type: true
+
+  brcm,pcie-ob:
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  brcm,pcie-ob-axi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi:
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: brcm,iproc-msi
+
+  msi-parent: true
+
+  msi-controller: true
+
+  brcm,pcie-msi-inten:
+    type: boolean
+    description: >
+      Needs to be present for some older iProc platforms that require the
+      interrupt enable registers to be set explicitly to enable MSI
+
+dependencies:
+  brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+  brcm,pcie-msi-inten: [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+           pcie0: pcie@18012000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18012000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <0>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x28000000 0 0x00010000>,
+                   <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+              phys = <&phy 0 5>;
+              phy-names = "pcie-phy";
+
+              brcm,pcie-ob;
+              brcm,pcie-ob-axi-offset = <0x00000000>;
+
+              msi-parent = <&msi0>;
+
+              /* iProc event queue based MSI */
+              msi0: msi {
+                 compatible = "brcm,iproc-msi";
+                 msi-controller;
+                 interrupt-parent = <&gic>;
+                 interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                         <GIC_SPI 97 IRQ_TYPE_NONE>,
+                         <GIC_SPI 98 IRQ_TYPE_NONE>,
+                         <GIC_SPI 99 IRQ_TYPE_NONE>;
+              };
+           };
+
+           pcie1: pcie@18013000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18013000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <1>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x48000000 0 0x00010000>,
+                   <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+              phys = <&phy 1 6>;
+              phy-names = "pcie-phy";
+           };
+    };
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 1fe102743f82..7e15aae7d69e 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Brcmstb PCIe Host Controller Device Tree Bindings
+title: Brcmstb PCIe Host Controller
 
 maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
@@ -19,6 +19,8 @@ properties:
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
           - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
 
   reg:
     maxItems: 1
@@ -76,6 +78,7 @@ properties:
       maxItems: 3
 
 required:
+  - compatible
   - reg
   - ranges
   - dma-ranges
@@ -143,11 +146,15 @@ examples:
                     #address-cells = <3>;
                     #size-cells = <2>;
                     #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                                  <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                     interrupt-names = "pcie", "msi";
                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
@@ -155,5 +162,24 @@ examples:
                                  <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
                     brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
             };
     };
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
index 651eee88989d..e6ef1012a580 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -11,7 +11,6 @@ maintainers:
 
 allOf:
   - $ref: "cdns-pcie-ep.yaml#"
-  - $ref: "pci-ep.yaml#"
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
index 21e8a8849076..baeafda36ebe 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -11,6 +11,7 @@ maintainers:
 
 allOf:
   - $ref: "cdns-pcie.yaml#"
+  - $ref: "pci-ep.yaml#"
 
 properties:
   cdns,max-outbound-regions:
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444fd..376e739bcad4 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -25,6 +25,8 @@ properties:
       - fsl,imx6qp-pcie
       - fsl,imx7d-pcie
       - fsl,imx8mq-pcie
+      - fsl,imx8mm-pcie
+      - fsl,imx8mp-pcie
 
   reg:
     items:
@@ -127,6 +129,12 @@ properties:
     enum: [1, 2, 3, 4]
     default: 1
 
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
   reset-gpio:
     description: Should specify the GPIO for controlling the PCI bus device
       reset signal. It's not polarity aware and defaults to active-low reset
@@ -136,6 +144,7 @@ properties:
     description: If present then the reset sequence using the GPIO
       specified in the "reset-gpio" property is reversed (H=reset state,
       L=operation state) (optional required).
+    type: boolean
 
   vpcie-supply:
     description: Should specify the regulator in charge of PCIe port power.
diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
index cbee87802559..c9f04999c9cf 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -37,6 +37,19 @@ properties:
     minItems: 3
     maxItems: 4
 
+  clocks: true
+
+  clock-names:
+    items:
+      - const: pcie_phy_ref
+      - const: pcie_aux
+      - const: pcie_apb_phy
+      - const: pcie_apb_sys
+      - const: pcie_aclk
+
+  phys:
+    maxItems: 1
+
   hisilicon,clken-gpios:
     description: |
       Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
index 6bcaa8f2c3cf..d25423aa7167 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -106,6 +106,9 @@ properties:
     maxItems: 3
 
   dma-coherent: true
+  iommu-map: true
+  iommu-map-mask: true
+  msi-parent: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index f36efa73a470..ee8a4791a78b 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -23,6 +23,7 @@ Required properties:
         "fsl,ls1012a-pcie"
         "fsl,ls1028a-pcie"
   EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
@@ -30,39 +31,49 @@ Required properties:
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The interrupt that is asserted for controller interrupts
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
 - fsl,pcie-scfg: Must include two entries.
   The first entry must be a link to the SCFG device node
-  The second entry must be '0' or '1' based on physical PCIe controller index.
+  The second entry is the physical PCIe controller index starting from '0'.
   This is used to get SCFG PEXN registers
 - dma-coherent: Indicates that the hardware IP block can ensure the coherency
   of the data transferred from/to the IP block. This can avoid the software
   cache flush/invalid actions, and improve the performance significantly.
 
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
 Example:
 
-	pcie@3400000 {
-		compatible = "fsl,ls1021a-pcie";
-		reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-		reg-names = "regs", "config";
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-		interrupt-names = "intr";
-		fsl,pcie-scfg = <&scfg 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		num-lanes = <4>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-			  0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000   /* prefetchable memory */
-			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-	};
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
index 044fa967bc8b..d60f43fd9c5a 100644
--- a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
@@ -45,6 +45,9 @@ patternProperties:
       phys:
         maxItems: 1
 
+      phy-names:
+        pattern: '^pcie-phy[0-2]$'
+
     required:
       - "#interrupt-cells"
       - interrupt-map-mask
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 742206dbd965..c00be39af64e 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -48,7 +48,13 @@ allOf:
 
 properties:
   compatible:
-    const: mediatek,mt8192-pcie
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+          - const: mediatek,mt8192-pcie
+      - const: mediatek,mt8192-pcie
 
   reg:
     maxItems: 1
@@ -84,7 +90,9 @@ properties:
       - const: tl_96m
       - const: tl_32k
       - const: peri_26m
-      - const: top_133m
+      - enum:
+          - top_133m        # for MT8192
+          - peri_mem        # for MT8188/MT8195
 
   assigned-clocks:
     maxItems: 1
@@ -95,6 +103,10 @@ properties:
   phys:
     maxItems: 1
 
+  phy-names:
+    items:
+      - const: pcie-phy
+
   '#interrupt-cells':
     const: 1
 
@@ -122,6 +134,7 @@ required:
   - interrupts
   - ranges
   - clocks
+  - clock-names
   - '#interrupt-cells'
   - interrupt-controller
 
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 57ae73462272..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,6 +7,7 @@ Required properties:
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
 - device_type: Must be "pci"
 - reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index 7b0776457178..f7a3c2636355 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip PCIe Root Port Bridge Controller Device Tree Bindings
+title: Microchip PCIe Root Port Bridge Controller
 
 maintainers:
   - Daire McNamara <daire.mcnamara@microchip.com>
@@ -25,6 +25,33 @@ properties:
       - const: cfg
       - const: apb
 
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: '^fic[0-3]$'
+
   interrupts:
     minItems: 1
     items:
@@ -40,12 +67,34 @@ properties:
   ranges:
     maxItems: 1
 
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
   msi-controller:
     description: Identifies the node as an MSI controller.
 
   msi-parent:
     description: MSI controller the device is capable of using.
 
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
 required:
   - reg
   - reg-names
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 6173af6885f8..6d022a9d36ee 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -77,9 +77,15 @@ and the following optional properties:
 - marvell,pcie-lane: the physical PCIe lane number, for ports having
   multiple lanes. If this property is not found, we assume that the
   value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
 - reset-gpios: optional GPIO to PERST#
 - reset-delay-us: delay in us to wait after reset de-assertion, if not
   specified will default to 100ms, as required by the PCIe specification.
+- interrupt-names: list of interrupt names, supported are:
+   - "intx" - interrupt line triggered by one of the legacy interrupt
+- interrupts or interrupts-extended: List of the interrupt sources which
+  corresponding to the "interrupt-names". If non-empty then also additional
+  'interrupt-controller' subnode must be defined.
 
 Example:
 
@@ -141,6 +147,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 58>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		/* low-active PERST# reset on GPIO 25 */
 		reset-gpios = <&gpio0 25 1>;
 		/* wait 20ms for device settle after reset deassertion */
@@ -161,6 +168,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 59>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
 		clocks = <&gateclk 6>;
 	};
 
@@ -177,6 +185,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 60>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
 		clocks = <&gateclk 7>;
 	};
 
@@ -193,6 +202,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 61>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
 		clocks = <&gateclk 8>;
 	};
 
@@ -209,6 +219,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 62>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 9>;
 	};
 
@@ -225,6 +236,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 63>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
 		clocks = <&gateclk 10>;
 	};
 
@@ -241,6 +253,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 64>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
 		clocks = <&gateclk 11>;
 	};
 
@@ -257,6 +270,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 65>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
 		clocks = <&gateclk 12>;
 	};
 
@@ -273,6 +287,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 99>;
 		marvell,pcie-port = <2>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 26>;
 	};
 
@@ -289,6 +304,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 103>;
 		marvell,pcie-port = <3>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 27>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 000000000000..a24fb8307d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
+  of the controller instances are dual mode; they can work either in Root
+  Port mode or Endpoint mode but one at a time.
+
+  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+  operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie-ep
+      - nvidia,tegra234-pcie-ep
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture used to map the remote Root Complex address space
+
+  reg-names:
+    items:
+      - const: appl
+      - const: atu_dma
+      - const: dbi
+      - const: addr_space
+
+  interrupts:
+    items:
+      - description: controller interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  reset-gpios:
+    description: Must contain a phandle to a GPIO controller followed by GPIO
+      that is being used as PERST input signal. Please refer to pci.txt.
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals
+
+  nvidia,refclk-select-gpios:
+    maxItems: 1
+    description: GPIO used to enable REFCLK to controller from the host
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is configured
+      to receive Reference Clock from the host.
+      NOTE: This is applicable only for Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - reset-gpios
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra194-pcie-ep";
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/gpio/tegra234-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra234-pcie-ep";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,enable-ext-refclk;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon
+                                          TEGRA234_AON_GPIO(AA, 4)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
deleted file mode 100644
index 8e4f9bfb316d..000000000000
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ /dev/null
@@ -1,245 +0,0 @@
-NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
-
-This PCIe controller is based on the Synopsis Designware PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml and
-snps,dw-pcie-ep.yaml.
-Some of the controller instances are dual mode where in they can work either
-in root port mode or endpoint mode but one at a time.
-
-Required properties:
-- power-domains: A phandle to the node that controls power to the respective
-  PCIe controller and a specifier name for the PCIe controller. Following are
-  the specifiers for the different PCIe controllers
-    TEGRA194_POWER_DOMAIN_PCIEX8B: C0
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C1
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C2
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C3
-    TEGRA194_POWER_DOMAIN_PCIEX4A: C4
-    TEGRA194_POWER_DOMAIN_PCIEX8A: C5
-  these specifiers are defined in
-  "include/dt-bindings/power/tegra194-powergate.h" file.
-- reg: A list of physical base address and length pairs for each set of
-  controller registers. Must contain an entry for each entry in the reg-names
-  property.
-- reg-names: Must include the following entries:
-  "appl": Controller's application logic registers
-  "config": As per the definition in snps,dw-pcie.yaml
-  "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
-             Translation Unit) registers of the PCIe core are made available
-             for SW access.
-  "dbi": The aperture where root port's own configuration registers are
-         available
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The Tegra interrupt that is asserted for controller interrupts
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - core
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - apb
-  - core
-- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
-- phy-names: Must include an entry for each active lane.
-  "p2u-N": where N ranges from 0 to one less than the total number of lanes
-- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
-  by controller-id. Following are the controller ids for each controller.
-    0: C0
-    1: C1
-    2: C2
-    3: C3
-    4: C4
-    5: C5
-- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
-
-RC mode:
-- compatible: Tegra19x must contain  "nvidia,tegra194-pcie"
-- device_type: Must be "pci" for RC mode
-- interrupt-names: Must include the following entries:
-  "msi": The Tegra interrupt that is asserted when an MSI is received
-- bus-range: Range of bus numbers associated with this controller
-- #address-cells: Address representation for root ports (must be 3)
-  - cell 0 specifies the bus and device numbers of the root port:
-    [23:16]: bus number
-    [15:11]: device number
-  - cell 1 denotes the upper 32 address bits and should be 0
-  - cell 2 contains the lower 32 address bits and is used to translate to the
-    CPU address space
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Describes the translation of addresses for root ports and standard
-  PCI regions. The entries must be 7 cells each, where the first three cells
-  correspond to the address as described for the #address-cells property
-  above, the fourth and fifth cells are for the physical CPU address to
-  translate to and the sixth and seventh cells are as described for the
-  #size-cells property above.
-  - Entries setup the mapping for the standard I/O, memory and
-    prefetchable PCI regions. The first cell determines the type of region
-    that is setup:
-    - 0x81000000: I/O memory region
-    - 0x82000000: non-prefetchable memory region
-    - 0xc2000000: prefetchable memory region
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-
-EP mode:
-In Tegra194, Only controllers C0, C4 & C5 support EP mode.
-- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep"
-- reg-names: Must include the following entries:
-  "addr_space": Used to map remote RC address space
-- reset-gpios: Must contain a phandle to a GPIO controller followed by
-  GPIO that is being used as PERST input signal. Please refer to pci.txt
-  document.
-
-Optional properties:
-- pinctrl-names: A list of pinctrl state names.
-  It is mandatory for C5 controller and optional for other controllers.
-  - "default": Configures PCIe I/O for proper operation.
-- pinctrl-0: phandle for the 'default' state of pin configuration.
-  It is mandatory for C5 controller and optional for other controllers.
-- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt
-- nvidia,update-fc-fixup: This is a boolean property and needs to be present to
-    improve performance when a platform is designed in such a way that it
-    satisfies at least one of the following conditions thereby enabling root
-    port to exchange optimum number of FC (Flow Control) credits with
-    downstream devices
-    1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
-    2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
-       a) speed is Gen-2 and MPS is 256B
-       b) speed is >= Gen-3 with any MPS
-- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM
-   to be specified in microseconds
-- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be
-   specified in microseconds
-- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
-   specified in microseconds
-
-RC mode:
-- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
-  if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
-  in p2972-0000 platform).
-- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
-  if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
-  in p2972-0000 platform).
-
-EP mode:
-- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller
-  followed by GPIO that is being used to enable REFCLK to controller from host
-
-NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
-operate in the endpoint mode because of the way the platform is designed.
-
-Examples:
-=========
-
-Tegra194 RC mode:
------------------
-
-	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie";
-		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K)  */
-		reg-names = "appl", "config", "atu_dma";
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		num-lanes = <8>;
-		linux,pci-domain = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
-
-		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
-		clock-names = "core";
-
-		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
-			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
-		reset-names = "apb", "core";
-
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
-		nvidia,bpmp = <&bpmp 0>;
-
-		supports-clkreq;
-		nvidia,aspm-cmrt-us = <60>;
-		nvidia,aspm-pwr-on-t-us = <20>;
-		nvidia,aspm-l0s-entrance-latency-us = <3>;
-
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000    /* downstream I/O (1MB) */
-			  0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01E00000    /* non-prefetchable memory (30MB) */
-			  0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>;  /* prefetchable memory (16GB) */
-
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
-		vpcie3v3-supply = <&vdd_3v3_pcie>;
-		vpcie12v-supply = <&vdd_12v_pcie>;
-
-		phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
-		       <&p2u_hsio_5>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
-	};
-
-Tegra194 EP mode:
------------------
-
-	pcie-ep@141a0000 {
-		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
-		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
-		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
-		reg-names = "appl", "atu_dma", "dbi", "addr_space";
-
-		num-lanes = <8>;
-		num-ib-windows = <2>;
-		num-ob-windows = <8>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
-
-		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
-		clock-names = "core";
-
-		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
-			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
-		reset-names = "apb", "core";
-
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
-		interrupt-names = "intr";
-
-		nvidia,bpmp = <&bpmp 5>;
-
-		nvidia,aspm-cmrt-us = <60>;
-		nvidia,aspm-pwr-on-t-us = <20>;
-		nvidia,aspm-l0s-entrance-latency-us = <3>;
-
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
-
-		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
-
-		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
-					      GPIO_ACTIVE_HIGH>;
-
-		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-			    "p2u-5", "p2u-6", "p2u-7";
-	};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
new file mode 100644
index 000000000000..75da3e8eecb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
@@ -0,0 +1,350 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie.yaml. Some of
+  the controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device
+  tree bindings.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie
+      - nvidia,tegra234-pcie
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: configuration registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+
+  reg-names:
+    items:
+      - const: appl
+      - const: config
+      - const: atu_dma
+      - const: dbi
+
+  interrupts:
+    items:
+      - description: controller interrupt
+      - description: MSI interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+      - const: msi
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,update-fc-fixup:
+    description: |
+      This is a boolean property and needs to be present to improve performance
+      when a platform is designed in such a way that it satisfies at least one
+      of the following conditions thereby enabling Root Port to exchange
+      optimum number of FC (Flow Control) credits with downstream devices:
+
+      NOTE: This is applicable only for Tegra194.
+
+        1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
+        2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
+          a) speed is Gen-2 and MPS is 256B
+          b) speed is >= Gen-3 with any MPS
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals.
+
+  vpcie3v3-supply:
+    description: A phandle to the regulator node that supplies 3.3V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  vpcie12v-supply:
+    description: A phandle to the regulator node that supplies 12V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to use the reference clocking coming in from an external
+      clock source instead of using the internal clock source.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14180000 {
+            compatible = "nvidia,tegra194-pcie";
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+            reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <8>;
+            linux,pci-domain = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
+            clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+                     <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 0>;
+
+            supports-clkreq;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000>, /* downstream I/O */
+                     <0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
+                     <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+            vpcie3v3-supply = <&vdd_3v3_pcie>;
+            vpcie12v-supply = <&vdd_12v_pcie>;
+
+            phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+                   <&p2u_hsio_5>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14160000 {
+            compatible = "nvidia,tegra234-pcie";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+            reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <4>;
+            num-viewport = <8>;
+            linux,pci-domain = <4>;
+
+            clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+                     <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 4>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+                     <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+                     <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+            vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+            phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+                   <&p2u_hsio_7>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
deleted file mode 100644
index aeba38f0a387..000000000000
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Renesas AHB to PCI bridge
--------------------------
-
-This is the bridge used internally to connect the USB controllers to the
-AHB. There is one bridge instance per USB port connected to the internal
-OHCI and EHCI controllers.
-
-Required properties:
-- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC;
-	      "renesas,pci-r8a7743" for the R8A7743 SoC;
-	      "renesas,pci-r8a7744" for the R8A7744 SoC;
-	      "renesas,pci-r8a7745" for the R8A7745 SoC;
-	      "renesas,pci-r8a7790" for the R8A7790 SoC;
-	      "renesas,pci-r8a7791" for the R8A7791 SoC;
-	      "renesas,pci-r8a7793" for the R8A7793 SoC;
-	      "renesas,pci-r8a7794" for the R8A7794 SoC;
-	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or
-				      RZ/G1 compatible device.
-
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg:	A list of physical regions to access the device: the first is
-	the operational registers for the OHCI/EHCI controllers and the
-	second is for the bridge configuration and control registers.
-- interrupts: interrupt for the device.
-- clocks: The reference to the device clock.
-- bus-range: The PCI bus number range; as this is a single bus, the range
-	     should be specified as the same value twice.
-- #address-cells: must be 3.
-- #size-cells: must be 2.
-- #interrupt-cells: must be 1.
-- interrupt-map: standard property used to define the mapping of the PCI
-  interrupts to the GIC interrupts.
-- interrupt-map-mask: standard property that helps to define the interrupt
-  mapping.
-
-Optional properties:
-- dma-ranges: a single range for the inbound memory region. If not supplied,
-  defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
-  allowed combinations of address and size.
-
-Example SoC configuration:
-
-	pci0: pci@ee090000  {
-		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0x0 0xee090000 0x0 0xc00>,
-		      <0x0 0xee080000 0x0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb@1,0 {
-			reg = <0x800 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-
-		usb@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-	};
-
-Example board setup:
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
index 3d23599e5e91..977c976ea799 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -9,12 +9,11 @@ title: Qualcomm PCIe Endpoint Controller binding
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
-allOf:
-  - $ref: "pci-ep.yaml#"
-
 properties:
   compatible:
-    const: qcom,sdx55-pcie-ep
+    enum:
+      - qcom,sdx55-pcie-ep
+      - qcom,sm8450-pcie-ep
 
   reg:
     items:
@@ -35,24 +34,12 @@ properties:
       - const: mmio
 
   clocks:
-    items:
-      - description: PCIe Auxiliary clock
-      - description: PCIe CFG AHB clock
-      - description: PCIe Master AXI clock
-      - description: PCIe Slave AXI clock
-      - description: PCIe Slave Q2A AXI clock
-      - description: PCIe Sleep clock
-      - description: PCIe Reference clock
+    minItems: 7
+    maxItems: 8
 
   clock-names:
-    items:
-      - const: aux
-      - const: cfg
-      - const: bus_master
-      - const: bus_slave
-      - const: slave_q2a
-      - const: sleep
-      - const: ref
+    minItems: 7
+    maxItems: 8
 
   qcom,perst-regs:
     description: Reference to a syscon representing TCSR followed by the two
@@ -105,7 +92,6 @@ required:
   - reg-names
   - clocks
   - clock-names
-  - qcom,perst-regs
   - interrupts
   - interrupt-names
   - reset-gpios
@@ -113,6 +99,64 @@ required:
   - reset-names
   - power-domains
 
+allOf:
+  - $ref: pci-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Sleep clock
+            - description: PCIe Reference clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: sleep
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Reference clock
+            - description: PCIe DDRSS SF TBU clock
+            - description: PCIe AGGRE NOC AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: ref
+            - const: ddrss_sf_tbu
+            - const: aggre_noc_axi
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
deleted file mode 100644
index a0ae024c2d0c..000000000000
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ /dev/null
@@ -1,377 +0,0 @@
-* Qualcomm PCI express root complex
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain
-			- "qcom,pcie-ipq8064" for ipq8064
-			- "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
-			- "qcom,pcie-apq8064" for apq8064
-			- "qcom,pcie-apq8084" for apq8084
-			- "qcom,pcie-msm8996" for msm8996 or apq8096
-			- "qcom,pcie-ipq4019" for ipq4019
-			- "qcom,pcie-ipq8074" for ipq8074
-			- "qcom,pcie-qcs404" for qcs404
-			- "qcom,pcie-sc8180x" for sc8180x
-			- "qcom,pcie-sdm845" for sdm845
-			- "qcom,pcie-sm8250" for sm8250
-			- "qcom,pcie-ipq6018" for ipq6018
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register ranges as listed in the reg-names property
-
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Must include the following entries
-			- "parf"   Qualcomm specific registers
-			- "dbi"	   DesignWare PCIe registers
-			- "elbi"   External local bus interface registers
-			- "config" PCIe configuration space
-			- "atu"    ATU address space (optional)
-
-- device_type:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "pci". As specified in snps,dw-pcie.yaml
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 3. As specified in snps,dw-pcie.yaml
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 2. As specified in snps,dw-pcie.yaml
-
-- ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: MSI interrupt
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain "msi"
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 1. As specified in snps,dw-pcie.yaml
-
-- interrupt-map-mask:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- interrupt-map:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and clock specifier pairs as listed
-		    in clock-names property
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	Configuration AHB clock
-
-- clock-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core"	Clocks the pcie hw block
-			- "phy"		Clocks the pcie PHY block
-			- "aux" 	Clocks the pcie AUX block
-			- "ref" 	Clocks the pcie ref block
-- clock-names:
-	Usage: required for apq8084/ipq4019
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary (AUX) clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for msm8996/apq8096
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"	Pipe Clock driving internal logic
-			- "aux"		Auxiliary (AUX) clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "ahb"		AHB clock
-			- "aux"		Auxiliary clock
-
-- clock-names:
-	Usage: required for ipq6018
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "axi_bridge"	AXI bridge clock
-			- "rchng"
-
-- clock-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	AHB clock
-			- "aux"		Auxiliary clock
-			- "master_bus"	AXI Master clock
-			- "slave_bus"	AXI Slave clock
-
-- clock-names:
-	Usage: required for sdm845
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "pipe"	PIPE clock
-
-- clock-names:
-	Usage: required for sc8180x and sm8250
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "ddrss_sf_tbu" PCIe SF TBU clock
-			- "pipe"	PIPE clock
-
-- resets:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and reset specifier pairs as listed
-		    in reset-names property
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi"  AXI reset
-			- "ahb"  AHB reset
-			- "por"  POR reset
-			- "pci"  PCI reset
-			- "phy"  PHY reset
-
-- reset-names:
-	Usage: required for apq8084
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core" Core reset
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI master reset
-			- "axi_s"		AXI slave reset
-			- "pipe"		PIPE reset
-			- "axi_m_vmid"		VMID reset
-			- "axi_s_xpu"		XPU reset
-			- "parf"		PARF reset
-			- "phy"			PHY reset
-			- "axi_m_sticky"	AXI sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-			- "phy_ahb"		PHY AHB reset
-			- "ext"			EXT reset
-
-- reset-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-
-- reset-names:
-	Usage: required for ipq6018
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "axi_s_sticky"	AXI Slave Sticky reset
-
-- reset-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-
-- reset-names:
-	Usage: required for sc8180x, sdm845 and sm8250
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pci"			PCIe core reset
-
-- power-domains:
-	Usage: required for apq8084 and msm8996/apq8096
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pair to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral
-
-- vdda-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the core analog power supply
-
-- vdda_phy-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for PHY
-
-- vdda_refclk-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for IC which generates
-		    reference clock
-- vddpe-3v3-supply:
-	Usage: optional
-	Value type: <phandle>
-	Definition: A phandle to the PCIe endpoint power supply
-
-- phys:
-	Usage: required for apq8084 and qcs404
-	Value type: <phandle>
-	Definition: List of phandle(s) as listed in phy-names property
-
-- phy-names:
-	Usage: required for apq8084 and qcs404
-	Value type: <stringlist>
-	Definition: Should contain "pciephy"
-
-- <name>-gpios:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and GPIO specifier pairs. Should contain
-			- "perst-gpios"	PCIe endpoint reset signal line
-			- "wake-gpios"	PCIe endpoint wake signal line
-
-* Example for ipq/apq8064
-	pcie@1b500000 {
-		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
-		reg = <0x1b500000 0x1000
-		       0x1b502000 0x80
-		       0x1b600000 0x100
-		       0x0ff00000 0x100000>;
-		reg-names = "dbi", "elbi", "parf", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
-		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc PCIE_A_CLK>,
-			 <&gcc PCIE_H_CLK>,
-			 <&gcc PCIE_PHY_CLK>,
-			 <&gcc PCIE_AUX_CLK>,
-			 <&gcc PCIE_ALT_REF_CLK>;
-		clock-names = "core", "iface", "phy", "aux", "ref";
-		resets = <&gcc PCIE_ACLK_RESET>,
-			 <&gcc PCIE_HCLK_RESET>,
-			 <&gcc PCIE_POR_RESET>,
-			 <&gcc PCIE_PCI_RESET>,
-			 <&gcc PCIE_PHY_RESET>,
-			 <&gcc PCIE_EXT_RESET>;
-		reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-		pinctrl-0 = <&pcie_pins_default>;
-		pinctrl-names = "default";
-	};
-
-* Example for apq8084
-	pcie0@fc520000 {
-		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
-		reg = <0xfc520000 0x2000>,
-		      <0xff000000 0x1000>,
-		      <0xff001000 0x1000>,
-		      <0xff002000 0x2000>;
-		reg-names = "parf", "dbi", "elbi", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0          0xff200000 0 0x00100000   /* I/O */
-			  0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
-		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_AUX_CLK>;
-		clock-names = "iface", "master_bus", "slave_bus", "aux";
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "core";
-		power-domains = <&gcc PCIE0_GDSC>;
-		vdda-supply = <&pma8084_l3>;
-		phys = <&pciephy0>;
-		phy-names = "pciephy";
-		perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&pcie0_pins_default>;
-		pinctrl-names = "default";
-	};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
new file mode 100644
index 000000000000..54f07852d279
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,825 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Stanimir Varbanov <svarbanov@mm-sol.com>
+
+description: |
+  Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
+  PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-ipq8064
+      - qcom,pcie-ipq8064-v2
+      - qcom,pcie-apq8064
+      - qcom,pcie-apq8084
+      - qcom,pcie-msm8996
+      - qcom,pcie-ipq4019
+      - qcom,pcie-ipq8074
+      - qcom,pcie-qcs404
+      - qcom,pcie-sa8540p
+      - qcom,pcie-sc7280
+      - qcom,pcie-sc8180x
+      - qcom,pcie-sc8280xp
+      - qcom,pcie-sdm845
+      - qcom,pcie-sm8150
+      - qcom,pcie-sm8250
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+      - qcom,pcie-ipq6018
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    maxItems: 5
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  # Common definitions for clocks, clock-names and reset.
+  # Platform constraints are described later.
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  resets-names:
+    minItems: 1
+    maxItems: 12
+
+  vdda-supply:
+    description: A phandle to the core analog power supply
+
+  vdda_phy-supply:
+    description: A phandle to the core analog power supply for PHY
+
+  vdda_refclk-supply:
+    description: A phandle to the core analog power supply for IC which generates reference clock
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+              - qcom,pcie-msm8996
+              - qcom,pcie-sdm845
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sc8280xp
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: core # Clocks the pcie hw block
+            - const: iface # Configuration AHB clock
+            - const: phy # Clocks the pcie PHY block
+            - const: aux # Clocks the pcie AUX block, not on apq8064
+            - const: ref # Clocks the pcie ref block, not on apq8064
+        resets:
+          minItems: 5
+          maxItems: 6
+        reset-names:
+          minItems: 5
+          items:
+            - const: axi # AXI reset
+            - const: ahb # AHB reset
+            - const: por # POR reset
+            - const: pci # PCI reset
+            - const: phy # PHY reset
+            - const: ext # EXT reset, not on apq8064
+      required:
+        - vdda-supply
+        - vdda_phy-supply
+        - vdda_refclk-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # Configuration AHB clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+            - const: aux # Auxiliary (AUX) clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: core # Core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq4019
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux # Auxiliary (AUX) clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+        resets:
+          minItems: 12
+          maxItems: 12
+        reset-names:
+          items:
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: pipe # PIPE reset
+            - const: axi_m_vmid # VMID reset
+            - const: axi_s_xpu # XPU reset
+            - const: parf # PARF reset
+            - const: phy # PHY reset
+            - const: axi_m_sticky # AXI sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+            - const: phy_ahb # PHY AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+    then:
+      oneOf:
+        - properties:
+            clock-names:
+              items:
+                - const: pipe # Pipe Clock driving internal logic
+                - const: aux # Auxiliary (AUX) clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+        - properties:
+            clock-names:
+              items:
+                - const: pipe # Pipe Clock driving internal logic
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: cfg # Configuration clock
+                - const: aux # Auxiliary (AUX) clock
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        resets: false
+        reset-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq8074
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+        resets:
+          minItems: 7
+          maxItems: 7
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge # AXI bridge clock
+            - const: rchng
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # AHB clock
+            - const: aux # Auxiliary clock
+            - const: master_bus # AXI Master clock
+            - const: slave_bus # AXI Slave clock
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdm845
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+        - properties:
+            clocks:
+              minItems: 7
+              maxItems: 7
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 9
+              maxItems: 9
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie0
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr_4 # NoC aggregate 4 clock
+            - const: noc_aggr_south_sf # NoC aggregate South SF clock
+            - const: cnoc_qx # Configuration NoC QX clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-apq8064
+                - qcom,pcie-ipq4019
+                - qcom,pcie-ipq8064
+                - qcom,pcie-ipq8064v2
+                - qcom,pcie-ipq8074
+                - qcom,pcie-qcs404
+    then:
+      required:
+        - power-domains
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sdm845
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+    then:
+      oneOf:
+        - properties:
+            interrupts:
+              maxItems: 1
+            interrupt-names:
+              items:
+                - const: msi
+        - properties:
+            interrupts:
+              minItems: 8
+            interrupt-names:
+              items:
+                - const: msi0
+                - const: msi1
+                - const: msi2
+                - const: msi3
+                - const: msi4
+                - const: msi5
+                - const: msi6
+                - const: msi7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-apq8084
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064-v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+              - qcom,pcie-sa8540p
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie@1b500000 {
+      compatible = "qcom,pcie-ipq8064";
+      reg = <0x1b500000 0x1000>,
+            <0x1b502000 0x80>,
+            <0x1b600000 0x100>,
+            <0x0ff00000 0x100000>;
+      reg-names = "dbi", "elbi", "parf", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+               <0x82000000 0 0 0x08000000 0 0x07e00000>;
+      interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 41>,
+               <&gcc 43>,
+               <&gcc 44>,
+               <&gcc 42>,
+               <&gcc 248>;
+      clock-names = "core", "iface", "phy", "aux", "ref";
+      resets = <&gcc 27>,
+               <&gcc 26>,
+               <&gcc 25>,
+               <&gcc 24>,
+               <&gcc 23>,
+               <&gcc 22>;
+      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+      pinctrl-0 = <&pcie_pins_default>;
+      pinctrl-names = "default";
+      vdda-supply = <&pm8921_s3>;
+      vdda_phy-supply = <&pm8921_lvs6>;
+      vdda_refclk-supply = <&ext_3p3v>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie@fc520000 {
+      compatible = "qcom,pcie-apq8084";
+      reg = <0xfc520000 0x2000>,
+            <0xff000000 0x1000>,
+            <0xff001000 0x1000>,
+            <0xff002000 0x2000>;
+      reg-names = "parf", "dbi", "elbi", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0          0xff200000 0 0x00100000>,
+               <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+      interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 324>,
+               <&gcc 325>,
+               <&gcc 327>,
+               <&gcc 323>;
+      clock-names = "iface", "master_bus", "slave_bus", "aux";
+      resets = <&gcc 81>;
+      reset-names = "core";
+      power-domains = <&gcc 1>;
+      vdda-supply = <&pma8084_l3>;
+      phys = <&pciephy0>;
+      phy-names = "pciephy";
+      perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+      pinctrl-0 = <&pcie0_pins_default>;
+      pinctrl-names = "default";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
new file mode 100644
index 000000000000..0f18cceba3d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas AHB to PCI bridge
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  This is the bridge used internally to connect the USB controllers to the
+  AHB. There is one bridge instance per USB port connected to the internal
+  OHCI and EHCI controllers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,pci-r8a7742      # RZ/G1H
+              - renesas,pci-r8a7743      # RZ/G1M
+              - renesas,pci-r8a7744      # RZ/G1N
+              - renesas,pci-r8a7745      # RZ/G1E
+              - renesas,pci-r8a7790      # R-Car H2
+              - renesas,pci-r8a7791      # R-Car M2-W
+              - renesas,pci-r8a7793      # R-Car M2-N
+              - renesas,pci-r8a7794      # R-Car E2
+          - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pci-r9a06g032     # RZ/N1D
+          - const: renesas,pci-rzn1       # RZ/N1
+
+  reg:
+    items:
+      - description: Operational registers for the OHCI/EHCI controllers.
+      - description: Bridge configuration and control registers.
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  bus-range:
+    description: |
+      The PCI bus number range; as this is a single bus, the range
+      should be specified as the same value twice.
+
+  dma-ranges:
+    description: |
+      A single range for the inbound memory region. If not supplied,
+      defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
+      the allowed combinations of address and size.
+    maxItems: 1
+
+patternProperties:
+  'usb@[0-1],0':
+    type: object
+
+    description:
+      This a USB controller PCI device
+
+    properties:
+      reg:
+        description:
+          Identify the correct bus, device and function number in the
+          form <bdf 0 0 0 0>.
+
+        items:
+          minItems: 5
+          maxItems: 5
+
+      phys:
+        description:
+          Reference to the USB phy
+        maxItems: 1
+
+      phy-names:
+        maxItems: 1
+
+    required:
+      - reg
+      - phys
+      - phy-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - power-domains
+  - bus-range
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,pci-rzn1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Internal bus clock (AHB) for HOST
+            - description: Internal bus clock (AHB) Power Management
+            - description: PCI clock for USB subsystem
+        clock-names:
+          items:
+            - const: hclkh
+            - const: hclkpm
+            - const: pciclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Device clock
+        clock-names:
+          items:
+            - const: pclk
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    pci@ee090000  {
+        compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
+        device_type = "pci";
+        reg = <0xee090000 0xc00>,
+              <0xee080000 0x1100>;
+        clocks = <&cpg CPG_MOD 703>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 703>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-range = <0 0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
+        dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
+        interrupt-map-mask = <0xf800 0 0 0x7>;
+        interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        usb@1,0 {
+            reg = <0x800 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+
+        usb@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 142bbe577763..bc0a9d1db750 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -19,20 +19,10 @@ description: |+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
 
-# We need a select here so we don't match all nodes with 'snps,dw-pcie'
-select:
-  properties:
-    compatible:
-      contains:
-        const: rockchip,rk3568-pcie
-  required:
-    - compatible
-
 properties:
   compatible:
     items:
       - const: rockchip,rk3568-pcie
-      - const: snps,dw-pcie
 
   reg:
     items:
@@ -110,7 +100,7 @@ examples:
         #size-cells = <2>;
 
         pcie3x2: pcie@fe280000 {
-            compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
+            compatible = "rockchip,rk3568-pcie";
             reg = <0x3 0xc0800000 0x0 0x390000>,
                   <0x0 0xfe280000 0x0 0x10000>,
                   <0x3 0x80000000 0x0 0x100000>;
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
index 445eed94b53f..f20ed7e709f7 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung SoC series PCIe Host Controller Device Tree Bindings
+title: Samsung SoC series PCIe Host Controller
 
 maintainers:
   - Marek Szyprowski <m.szyprowski@samsung.com>
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
index 2b9d1d6fc661..844fc7142302 100644
--- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -32,6 +32,8 @@ properties:
       - const: config
       - const: mgmt
 
+  dma-coherent: true
+
   num-lanes:
     const: 8
 
@@ -49,6 +51,12 @@ properties:
     description: A phandle to the PCIe power up reset line.
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
   pwren-gpios:
     description: Should specify the GPIO for controlling the PCI bus device power on.
     maxItems: 1
@@ -61,11 +69,10 @@ required:
   - num-lanes
   - interrupts
   - interrupt-names
-  - interrupt-parent
   - interrupt-map-mask
   - interrupt-map
-  - clock-names
   - clocks
+  - clock-names
   - resets
   - pwren-gpios
   - reset-gpios
@@ -105,7 +112,7 @@ examples:
                             <0x0 0x0 0x0 0x3 &plic0 59>,
                             <0x0 0x0 0x0 0x4 &plic0 60>;
             clock-names = "pcie_aux";
-            clocks = <&prci PRCI_CLK_PCIE_AUX>;
+            clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
             resets = <&prci 4>;
             pwren-gpios = <&gpio 5 0>;
             reset-gpios = <&gpio 8 0>;
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index b5935b1b153f..b78535040f04 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -55,25 +55,23 @@ properties:
       Translation Unit) registers.
 
   num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
     description: number of inbound address translation windows
-    maxItems: 1
     deprecated: true
 
   num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
     description: number of outbound address translation windows
-    maxItems: 1
     deprecated: true
 
-  max-functions:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: maximum number of functions that can be configured
-
 required:
   - reg
   - reg-names
   - compatible
 
-unevaluatedProperties: false
+additionalProperties: true
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 9ed0dfba7f89..7287d395e1b6 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -34,8 +34,8 @@ properties:
     minItems: 2
     maxItems: 5
     items:
-      enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
-              ulreg, smu, mpu, apb, phy ]
+      enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
+              parf, cfg, link, ulreg, smu, mpu, apb, phy ]
 
   num-lanes:
     description: |
@@ -68,12 +68,14 @@ properties:
       Translation Unit) registers.
 
   num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 256
     description: |
       number of view ports configured in hardware. If a platform
       does not specify it, the driver autodetects it.
     deprecated: true
 
-unevaluatedProperties: false
+additionalProperties: true
 
 required:
   - reg
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
index 144cbcd60a1c..437e61618d06 100644
--- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -20,7 +20,9 @@ allOf:
 
 properties:
   compatible:
-    const: socionext,uniphier-pro5-pcie-ep
+    enum:
+      - socionext,uniphier-pro5-pcie-ep
+      - socionext,uniphier-nx1-pcie-ep
 
   reg:
     minItems: 4
@@ -41,20 +43,26 @@ properties:
           - const: atu
 
   clocks:
+    minItems: 1
     maxItems: 2
 
   clock-names:
-    items:
-      - const: gio
-      - const: link
+    oneOf:
+      - items:              # for Pro5
+          - const: gio
+          - const: link
+      - const: link         # for NX1
 
   resets:
+    minItems: 1
     maxItems: 2
 
   reset-names:
-    items:
-      - const: gio
-      - const: link
+    oneOf:
+      - items:              # for Pro5
+          - const: gio
+          - const: link
+      - const: link         # for NX1
 
   num-ib-windows:
     const: 16
@@ -79,7 +87,7 @@ required:
   - resets
   - reset-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 000000000000..638b99db0433
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+  UniPhier PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pcie
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: dbi
+      - const: link
+      - const: config
+      - const: atu
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-viewport: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        gic: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+    pcie: pcie@66000000 {
+        compatible = "socionext,uniphier-pcie";
+        reg-names = "dbi", "link", "config";
+        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&sys_clk 24>;
+        resets = <&sys_rst 24>;
+        num-lanes = <1>;
+        num-viewport = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
+                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+        #interrupt-cells = <1>;
+        interrupt-names = "dma", "msi";
+        interrupt-parent = <&gic>;
+        interrupts = <0 224 4>, <0 225 4>;
+        interrupt-map-mask = <0 0 0  7>;
+        interrupt-map = <0 0 0  1  &pcie_intc 0>,
+                        <0 0 0  2  &pcie_intc 1>,
+                        <0 0 0  3  &pcie_intc 2>,
+                        <0 0 0  4  &pcie_intc 3>;
+
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <0 226 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
index 78c217d362a7..74195c1f5292 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
@@ -32,8 +32,12 @@ properties:
     maxItems: 1
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   interrupts:
     minItems: 1
@@ -65,9 +69,7 @@ examples:
                <0x5506000 0x1000>;
         reg-names = "app", "dbics", "addr_space", "atu";
         power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
-        num-ib-windows = <16>;
-        num-ob-windows = <16>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
index 834dc1c1743c..a20dccbafd94 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -29,16 +29,27 @@ properties:
       - const: config
       - const: atu
 
+  interrupts:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
   ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
     description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   msi-map: true
 
@@ -84,10 +95,9 @@ examples:
         #size-cells = <2>;
         ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
                  <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
-        ti,syscon-pcie-id = <&pcie_devid>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         bus-range = <0x0 0xff>;
-        num-viewport = <16>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index cc900202df29..2115d5a3f0e1 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -60,6 +60,8 @@ properties:
       - const: fck
       - const: pcie_refclk
 
+  dma-coherent: true
+
   vendor-id:
     const: 0x104c
 
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 30b6396d83c8..48ed227fc5b9 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings
+title: Toshiba Visconti5 SoC PCIe Host Controller
 
 maintainers:
   - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
deleted file mode 100644
index 359585db049f..000000000000
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Socionext UniPhier PCIe host controller bindings
-
-This describes the devicetree bindings for PCIe host controller implemented
-on Socionext UniPhier SoCs.
-
-UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Required properties:
-- compatible: Should be "socionext,uniphier-pcie".
-- reg: Specifies offset and length of the register set for the device.
-	According to the reg-names, appropriate register sets are required.
-- reg-names: Must include the following entries:
-    "dbi"    - controller configuration registers
-    "link"   - SoC-specific glue layer registers
-    "config" - PCIe configuration space
-    "atu"    - iATU registers for DWC version 4.80 or later
-- clocks: A phandle to the clock gate for PCIe glue layer including
-	the host controller.
-- resets: A phandle to the reset line for PCIe glue layer including
-	the host controller.
-- interrupts: A list of interrupt specifiers. According to the
-	interrupt-names, appropriate interrupts are required.
-- interrupt-names: Must include the following entries:
-    "dma" - DMA interrupt
-    "msi" - MSI interrupt
-
-Optional properties:
-- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
-	phys are required.
-- phy-names: Must be "pcie-phy".
-
-Required sub-node:
-- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
-	interrupts.
-
-Required properties for legacy-interrupt-controller:
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupt-parent: Phandle to the parent interrupt controller.
-- interrupts: An interrupt specifier for legacy interrupt.
-
-Example:
-
-	pcie: pcie@66000000 {
-		compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
-		status = "disabled";
-		reg-names = "dbi", "link", "config";
-		reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
-		      <0x2fff0000 0x10000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		clocks = <&sys_clk 24>;
-		resets = <&sys_rst 24>;
-		num-lanes = <1>;
-		num-viewport = <1>;
-		bus-range = <0x0 0xff>;
-		device_type = "pci";
-		ranges =
-		/* downstream I/O */
-			<0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000
-		/* non-prefetchable memory */
-			 0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
-		#interrupt-cells = <1>;
-		interrupt-names = "dma", "msi";
-		interrupts = <0 224 4>, <0 225 4>;
-		interrupt-map-mask = <0 0 0  7>;
-		interrupt-map = <0 0 0  1  &pcie_intc 0>,	/* INTA */
-				<0 0 0  2  &pcie_intc 1>,	/* INTB */
-				<0 0 0  3  &pcie_intc 2>,	/* INTC */
-				<0 0 0  4  &pcie_intc 3>;	/* INTD */
-
-		pcie_intc: legacy-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 226 4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index a2bbc0eb7220..24ddc2855b94 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -14,17 +14,23 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,versal-cpm-host-1.00
+    enum:
+      - xlnx,versal-cpm-host-1.00
+      - xlnx,versal-cpm5-host
 
   reg:
     items:
-      - description: Configuration space region and bridge registers.
       - description: CPM system level control and status registers.
+      - description: Configuration space region and bridge registers.
+      - description: CPM5 control and status registers.
+    minItems: 2
 
   reg-names:
     items:
-      - const: cfg
       - const: cpm_slcr
+      - const: cfg
+      - const: cpm_csr
+    minItems: 2
 
   interrupts:
     maxItems: 1
@@ -55,7 +61,6 @@ required:
   - reg-names
   - "#interrupt-cells"
   - interrupts
-  - interrupt-parent
   - interrupt-map
   - interrupt-map-mask
   - bus-range
@@ -87,13 +92,43 @@ examples:
                        ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
                                 <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
                        msi-map = <0x0 &its_gic 0x0 0x10000>;
-                       reg = <0x6 0x00000000 0x0 0x10000000>,
-                             <0x0 0xfca10000 0x0 0x1000>;
-                       reg-names = "cfg", "cpm_slcr";
+                       reg = <0x0 0xfca10000 0x0 0x1000>,
+                             <0x6 0x00000000 0x0 0x10000000>;
+                       reg-names = "cpm_slcr", "cfg";
                        pcie_intc_0: interrupt-controller {
                                #address-cells = <0>;
                                #interrupt-cells = <1>;
                                interrupt-controller;
                        };
                };
+
+               cpm5_pcie: pcie@fcdd0000 {
+                       compatible = "xlnx,versal-cpm5-host";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+                                       <0 0 0 2 &pcie_intc_1 1>,
+                                       <0 0 0 3 &pcie_intc_1 2>,
+                                       <0 0 0 4 &pcie_intc_1 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x00 0xfcdd0000 0x00 0x1000>,
+                             <0x06 0x00000000 0x00 0x1000000>,
+                             <0x00 0xfce20000 0x00 0x1000000>;
+                       reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+                       pcie_intc_1: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
     };
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
new file mode 100644
index 000000000000..b01e0c8b963d
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed PECI Bus
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-peci
+      - aspeed,ast2500-peci
+      - aspeed,ast2600-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the external
+      oscillator clock.
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+  clock-frequency:
+    description:
+      The desired operation frequency of PECI controller in Hz.
+    minimum: 2000
+    maximum: 2000000
+    default: 1000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+    peci-controller@1e78b000 {
+      compatible = "aspeed,ast2600-peci";
+      reg = <0x1e78b000 0x100>;
+      interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+      resets = <&syscon ASPEED_RESET_PECI>;
+      cmd-timeout-ms = <1000>;
+      clock-frequency = <1000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/peci/peci-controller.yaml b/Documentation/devicetree/bindings/peci/peci-controller.yaml
new file mode 100644
index 000000000000..d7853291b060
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic for PECI
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+
+description:
+  PECI (Platform Environment Control Interface) is an interface that provides a
+  communication channel from Intel processors and chipset components to external
+  monitoring or control devices.
+
+properties:
+  $nodename:
+    pattern: "^peci-controller(@.*)?$"
+
+  cmd-timeout-ms:
+    description:
+      Command timeout in units of ms.
+
+additionalProperties: true
+
+examples:
+  - |
+    peci-controller@1e78b000 {
+      reg = <0x1e78b000 0x100>;
+      cmd-timeout-ms = <500>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,ccn.yaml b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
new file mode 100644
index 000000000000..0b0bb2091016
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,ccn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCN (Cache Coherent Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,ccn-502
+      - arm,ccn-504
+      - arm,ccn-508
+      - arm,ccn-512
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ccn@20000000 {
+        compatible = "arm,ccn-504";
+        reg = <0x20000000 0x1000000>;
+        interrupts = <0 181 4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
index 2d4219ec7eda..2e51072e794a 100644
--- a/Documentation/devicetree/bindings/perf/arm,cmn.yaml
+++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -14,6 +14,8 @@ properties:
   compatible:
     enum:
       - arm,cmn-600
+      - arm,cmn-650
+      - arm,cmn-700
       - arm,ci-700
 
   reg:
diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
new file mode 100644
index 000000000000..c87821be158b
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description:
+  ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared
+  L3 memory system, control logic and external interfaces to form a multicore
+  cluster. The PMU enables gathering various statistics on the operation of the
+  DSU. The PMU provides independent 32-bit counters that can count any of the
+  supported events, along with a 64-bit cycle counter. The PMU is accessed via
+  CPU system registers and has no MMIO component.
+
+properties:
+  compatible:
+    oneOf:
+      - const: arm,dsu-pmu
+      - items:
+          - const: arm,dsu-110-pmu
+          - const: arm,dsu-pmu
+
+  interrupts:
+    items:
+      - description: nCLUSTERPMUIRQ interrupt
+
+  cpus:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 12
+    items:
+      maxItems: 1
+    description: List of phandles for the CPUs connected to this DSU instance.
+
+required:
+  - compatible
+  - interrupts
+  - cpus
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/perf/arm-ccn.txt b/Documentation/devicetree/bindings/perf/arm-ccn.txt
deleted file mode 100644
index 1c53b5aa3317..000000000000
--- a/Documentation/devicetree/bindings/perf/arm-ccn.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* ARM CCN (Cache Coherent Network)
-
-Required properties:
-
-- compatible: (standard compatible string) should be one of:
-	"arm,ccn-502"
-	"arm,ccn-504"
-	"arm,ccn-508"
-	"arm,ccn-512"
-
-- reg: (standard registers property) physical address and size
-	(16MB) of the configuration registers block
-
-- interrupts: (standard interrupt property) single interrupt
-	generated by the control block
-
-Example:
-
-	ccn@2000000000 {
-		compatible = "arm,ccn-504";
-		reg = <0x20 0x00000000 0 0x1000000>;
-		interrupts = <0 181 4>;
-	};
diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml
new file mode 100644
index 000000000000..a18dd0a8c43a
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/marvell-cn10k-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN10K DDR performance monitor
+
+maintainers:
+  - Bharat Bhushan <bbhushan2@marvell.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - marvell,cn10k-ddr-pmu
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pmu@87e1c0000000 {
+            compatible = "marvell,cn10k-ddr-pmu";
+            reg = <0x87e1 0xc0000000 0x0 0x10000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt b/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt
deleted file mode 100644
index 1bd15785b4ae..000000000000
--- a/Documentation/devicetree/bindings/perf/nds32v3-pmu.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* NDS32 Performance Monitor Units
-
-NDS32 core have a PMU for counting cpu and cache events like cache misses.
-The NDS32 PMU representation in the device tree should be done as under:
-
-Required properties:
-
-- compatible :
-	"andestech,nds32v3-pmu"
-
-- interrupts : The interrupt number for NDS32 PMU is 13.
-
-Example:
-pmu{
-	compatible = "andestech,nds32v3-pmu";
-	interrupts = <13>;
-}
diff --git a/Documentation/devicetree/bindings/perf/spe-pmu.yaml b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
new file mode 100644
index 000000000000..7d74152f437e
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/spe-pmu.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/spe-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
+
+maintainers:
+  - Will Deacon <will@kernel.org>
+
+description:
+  ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
+  performance sample data using an in-memory trace buffer.
+
+properties:
+  compatible:
+    const: arm,statistical-profiling-extension-v1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      The PPI to signal SPE events. For heterogeneous systems where SPE is only
+      supported on a subset of the CPUs, please consult the arm,gic-v3 binding
+      for details on describing a PPI partition.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spe-pmu {
+        compatible = "arm,statistical-profiling-extension-v1";
+        interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
index 77606c899fe2..4fff091bd534 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 USB PHY Device Tree Bindings
+title: Allwinner A10 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
index 078af52b16ed..f557feca9763 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-a64-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 USB PHY Device Tree Bindings
+title: Allwinner A64 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,7 +15,9 @@ properties:
     const: 1
 
   compatible:
-    const: allwinner,sun50i-a64-usb-phy
+    enum:
+      - allwinner,sun20i-d1-usb-phy
+      - allwinner,sun50i-a64-usb-phy
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
index e632140722a2..4480fdedd669 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 USB PHY Device Tree Bindings
+title: Allwinner H6 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
index 5bad9b06e2e7..1563e3df3052 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun5i-a13-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 USB PHY Device Tree Bindings
+title: Allwinner A13 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
index d0b541a461f3..dfb6a8993535 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-mipi-dphy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings
+title: Allwinner A31 MIPI D-PHY Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -37,6 +37,18 @@ properties:
   resets:
     maxItems: 1
 
+  allwinner,direction:
+    $ref: '/schemas/types.yaml#/definitions/string'
+    description: |
+      Direction of the D-PHY:
+      - "rx" for receiving (e.g. when used with MIPI CSI-2);
+      - "tx" for transmitting (e.g. when used with MIPI DSI).
+
+    enum:
+      - tx
+      - rx
+    default: tx
+
 required:
   - "#phy-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
index 922b4665e00d..4897a3d2fbc3 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun6i-a31-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 USB PHY Device Tree Bindings
+title: Allwinner A31 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
index a94019efc2f3..99de9c6889a0 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 USB PHY Device Tree Bindings
+title: Allwinner A23 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
index 33f3ddc0492d..73438d84de50 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a83t-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t USB PHY Device Tree Bindings
+title: Allwinner A83t USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
index e288450e0844..77539b4601c2 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H3 USB PHY Device Tree Bindings
+title: Allwinner H3 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
index d947e50a49d2..2dd31630c13e 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-r40-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 USB PHY Device Tree Bindings
+title: Allwinner R40 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
index a2836c296cc4..395d33855d48 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-v3s-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner V3s USB PHY Device Tree Bindings
+title: Allwinner V3s USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
index 2eb493fa64fd..bd9445f6f130 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/allwinner,sun9i-a80-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB PHY Device Tree Bindings
+title: Allwinner A80 USB PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
index be485f500887..5eddaed3d853 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,axg-mipi-dphy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic AXG MIPI D-PHY
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
new file mode 100644
index 000000000000..7aa0c05d6ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic G12A MIPI analog PHY
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+  compatible:
+    const: amlogic,g12a-mipi-dphy-analog
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@0 {
+          compatible = "amlogic,g12a-mipi-dphy-analog";
+          reg = <0x0 0xc>;
+          #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
index 4d01f3124e1c..a90fa1baadab 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible: Should be the following:
                 "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 399ebde45409..f3a5fbabbbb5 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic G12A USB2 PHY
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
index 453c083cf44c..868b4e6fde71 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic G12A USB3 + PCIE Combo PHY
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
new file mode 100644
index 000000000000..1f085cdd1c85
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,meson8-hdmi-tx-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson8, Meson8b and Meson8m2 HDMI TX PHY
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |+
+  The HDMI TX PHY node should be the child of a syscon node with the
+  required property:
+
+  compatible = "amlogic,meson-hhi-sysctrl", "simple-mfd", "syscon"
+
+  Refer to the bindings described in
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+  $nodename:
+    pattern: "^hdmi-phy@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson8b-hdmi-tx-phy
+              - amlogic,meson8m2-hdmi-tx-phy
+          - const: amlogic,meson8-hdmi-tx-phy
+      - const: amlogic,meson8-hdmi-tx-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    description:
+      HDMI TMDS clock
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
+  - |
+    hdmi-phy@3a0 {
+      compatible = "amlogic,meson8b-hdmi-tx-phy", "amlogic,meson8-hdmi-tx-phy";
+      reg = <0x3a0 0xc>;
+      clocks = <&tmds_clock>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
deleted file mode 100644
index 10efff28b52b..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Broadcom Cygnus PCIe PHY
-
-Required properties:
-- compatible: must be "brcm,cygnus-pcie-phy"
-- reg: base address and length of the PCIe PHY block
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Each PCIe PHY should be represented by a child node
-
-Required properties For the child node:
-- reg: the PHY ID
-0 - PCIe RC 0
-1 - PCIe RC 1
-- #phy-cells: must be 0
-
-Example:
-	pcie_phy: phy@301d0a0 {
-		compatible = "brcm,cygnus-pcie-phy";
-		reg = <0x0301d0a0 0x14>;
-
-		pcie0_phy: phy@0 {
-			reg = <0>;
-			#phy-cells = <0>;
-		};
-
-		pcie1_phy: phy@1 {
-			reg = <1>;
-			#phy-cells = <0>;
-		};
-	};
-
-	/* users of the PCIe phy */
-
-	pcie0: pcie@18012000 {
-		...
-		...
-		phys = <&pcie0_phy>;
-		phy-names = "pcie-phy";
-	};
-
-	pcie1: pcie@18013000 {
-		...
-		...
-		phys = <pcie1_phy>;
-		phy-names = "pcie-phy";
-	};
diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml
new file mode 100644
index 000000000000..808e90b2465d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,cygnus-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus PCIe PHY
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  $nodename:
+    pattern: "^pcie[-|_]phy(@.*)?$"
+
+  compatible:
+    items:
+      - const: brcm,cygnus-pcie-phy
+
+  reg:
+    maxItems: 1
+    description: >
+      Base address and length of the PCIe PHY block
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^pcie-phy@[0-9]+$":
+    type: object
+    additionalProperties: false
+    description: >
+      PCIe PHY child nodes
+
+    properties:
+      reg:
+        maxItems: 1
+        description: >
+          The PCIe PHY port number
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie_phy: pcie_phy@301d0a0 {
+      compatible = "brcm,cygnus-pcie-phy";
+      reg = <0x0301d0a0 0x14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pcie0_phy: pcie-phy@0 {
+          reg = <0>;
+          #phy-cells = <0>;
+      };
+
+      pcie1_phy: pcie-phy@1 {
+          reg = <1>;
+          #phy-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt b/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
deleted file mode 100644
index 5b51007c6f24..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,mdio-mux-bus-pci.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Broadcom NS2 PCIe PHY binding document
-
-Required bus properties:
-- reg: MDIO Bus number for the MDIO interface
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required PHY properties:
-- compatible: should be "brcm,ns2-pcie-phy"
-- reg: MDIO Phy ID for the MDIO interface
-- #phy-cells: must be 0
-
-This is a child bus node of "brcm,mdio-mux-iproc" node.
-
-Example:
-
-mdio@0 {
-	reg = <0x0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	pci_phy0: pci-phy@0 {
-		compatible = "brcm,ns2-pcie-phy";
-		reg = <0x0>;
-		#phy-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml
new file mode 100644
index 000000000000..70eb48b391c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,ns2-pcie-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/brcm,ns2-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom NS2 PCIe PHY binding document
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+properties:
+  compatible:
+    const: brcm,ns2-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pci-phy@0 {
+          compatible = "brcm,ns2-pcie-phy";
+          reg = <0x0>;
+          #phy-cells = <0>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
index cb1aa325336f..435b971dfd9b 100644
--- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
@@ -102,19 +102,17 @@ if:
 then:
   properties:
     reg:
-      maxItems: 2
+      minItems: 2
+
     reg-names:
-      items:
-        - const: "phy"
-        - const: "phy-ctrl"
+      minItems: 2
 else:
   properties:
     reg:
       maxItems: 1
+
     reg-names:
       maxItems: 1
-      items:
-        - const: "phy"
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
new file mode 100644
index 000000000000..6fdd46ad5a78
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy-rx.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,dphy-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DPHY Rx
+
+maintainers:
+  - Pratyush Yadav <pratyush@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - const: cdns,dphy-rx
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dphy0: phy@4580000 {
+        compatible = "cdns,dphy-rx";
+        reg = <0x4580000 0x1100>;
+        #phy-cells = <0>;
+        power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
deleted file mode 100644
index 1095bc4e72d9..000000000000
--- a/Documentation/devicetree/bindings/phy/cdns,dphy.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Cadence DPHY
-============
-
-Cadence DPHY block.
-
-Required properties:
-- compatible: should be set to "cdns,dphy".
-- reg: physical base address and length of the DPHY registers.
-- clocks: DPHY reference clocks.
-- clock-names: must contain "psm" and "pll_ref".
-- #phy-cells: must be set to 0.
-
-Example:
-	dphy0: dphy@fd0e0000{
-		compatible = "cdns,dphy";
-		reg = <0x0 0xfd0e0000 0x0 0x1000>;
-		clocks = <&psm_clk>, <&pll_ref_clk>;
-		clock-names = "psm", "pll_ref";
-		#phy-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.yaml b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
new file mode 100644
index 000000000000..6cd9b0f388a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/cdns,dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DPHY
+
+maintainers:
+  - Pratyush Yadav <pratyush@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - cdns,dphy
+      - ti,j721e-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PMA state machine clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: psm
+      - const: pll_ref
+
+  "#phy-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    dphy0: phy@fd0e0000{
+        compatible = "cdns,dphy";
+        reg = <0xfd0e0000 0x1000>;
+        clocks = <&psm_clk>, <&pll_ref_clk>;
+        clock-names = "psm", "pll_ref";
+        power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
new file mode 100644
index 000000000000..0af765ba2793
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8 SoC series PCIe PHY
+
+maintainers:
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+properties:
+  "#phy-cells":
+    const: 0
+
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pciephy
+
+  fsl,refclk-pad-mode:
+    description: |
+      Specifies the mode of the refclk pad used. It can be UNUSED(PHY
+      refclock is derived from SoC internal source), INPUT(PHY refclock
+      is provided externally via the refclk pad) or OUTPUT(PHY refclock
+      is derived from SoC internal source and provided on the refclk pad).
+      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants
+      to be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2 ]
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2:
+    description: Gen2 De-emphasis value (optional).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,clkreq-unsupported:
+    type: boolean
+    description: A boolean property indicating the CLKREQ# signal is
+      not supported in the board design (optional)
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - fsl,refclk-pad-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/phy/phy-imx8-pcie.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    pcie_phy: pcie-phy@32f00000 {
+            compatible = "fsl,imx8mm-pcie-phy";
+            reg = <0x32f00000 0x10000>;
+            clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            clock-names = "ref";
+            assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+            assigned-clock-rates = <100000000>;
+            assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+            resets = <&src IMX8MQ_RESET_PCIEPHY>;
+            reset-names = "pciephy";
+            fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+            #phy-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml
new file mode 100644
index 000000000000..8767e48c71a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-lvds-phy.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,imx8qm-lvds-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel LVDS PHY for Freescale i.MX8qm SoC
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Mixel LVDS PHY IP block is found on Freescale i.MX8qm SoC.
+  It converts two groups of four 7/10 bits of CMOS data into two
+  groups of four data lanes of LVDS data streams. A phase-locked
+  transmit clock is transmitted in parallel with each group of
+  data streams over a fifth LVDS link. Every cycle of the transmit
+  clock, 56/80 bits of input data are sampled and transmitted
+  through the two groups of LVDS data streams. Together with the
+  transmit clocks, the two groups of LVDS data streams form two
+  LVDS channels.
+
+  The Mixel LVDS PHY found on Freescale i.MX8qm SoC is controlled
+  by Control and Status Registers(CSR) module in the SoC. The CSR
+  module, as a system controller, contains the PHY's registers.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-lvds-phy
+      - mixel,28fdsoi-lvds-1250-8ch-tx-pll
+
+  "#phy-cells":
+    const: 1
+    description: |
+      Cell allows setting the LVDS channel index of the PHY.
+      Index 0 is for LVDS channel0 and index 1 is for LVDS channel1.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#phy-cells"
+  - clocks
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    phy {
+        compatible = "fsl,imx8qm-lvds-phy";
+        #phy-cells = <1>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
new file mode 100644
index 000000000000..4d91e2f4f247
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/fsl,lynx-28g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Lynx 28G SerDes PHY binding
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,lynx-28g
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      serdes_1: phy@1ea0000 {
+        compatible = "fsl,lynx-28g";
+        reg = <0x0 0x1ea0000 0x0 0x1e30>;
+        #phy-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
index c2e073e26190..20b79e2e8b82 100644
--- a/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3660-usb3.yaml
@@ -41,20 +41,10 @@ additionalProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      usb3_otg_bc: usb3_otg_bc@ff200000 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x0 0xff200000 0x0 0x1000>;
-
-        usb-phy {
-          compatible = "hisilicon,hi3660-usb-phy";
-          #phy-cells = <0>;
-          hisilicon,pericrg-syscon = <&crg_ctrl>;
-          hisilicon,pctrl-syscon = <&pctrl>;
-          hisilicon,eye-diagram-param = <0x22466e4>;
-        };
-      };
+    usb-phy {
+        compatible = "hisilicon,hi3660-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,eye-diagram-param = <0x22466e4>;
     };
diff --git a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
index ebd78acfe2de..1cb00dbcd4c5 100644
--- a/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
+++ b/Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
@@ -52,22 +52,12 @@ additionalProperties: false
 
 examples:
   - |
-    bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      usb3_otg_bc: usb3_otg_bc@ff200000 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x0 0xff200000 0x0 0x1000>;
-
-        usb_phy {
-          compatible = "hisilicon,hi3670-usb-phy";
-          #phy-cells = <0>;
-          hisilicon,pericrg-syscon = <&crg_ctrl>;
-          hisilicon,pctrl-syscon = <&pctrl>;
-          hisilicon,sctrl-syscon = <&sctrl>;
-          hisilicon,eye-diagram-param = <0xfdfee4>;
-          hisilicon,tx-vboost-lvl = <0x5>;
-        };
-      };
+    usb-phy {
+        compatible = "hisilicon,hi3670-usb-phy";
+        #phy-cells = <0>;
+        hisilicon,pericrg-syscon = <&crg_ctrl>;
+        hisilicon,pctrl-syscon = <&pctrl>;
+        hisilicon,sctrl-syscon = <&sctrl>;
+        hisilicon,eye-diagram-param = <0xfdfee4>;
+        hisilicon,tx-vboost-lvl = <0x5>;
     };
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
index 347d0cdfb80d..5d54b0a0e873 100644
--- a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -47,10 +47,18 @@ properties:
 
   intel,syscfg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to Chip configuration registers
+          - description: ComboPhy instance id
     description: Chip configuration registers handle and ComboPhy instance id
 
   intel,hsio:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to HSIO registers
+          - description: ComboPhy instance id
     description: HSIO registers handle and ComboPhy instance id on NOC
 
   intel,aggregation:
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 954e67571dfd..ca818f83579b 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
+title: Intel Lightning Mountain(LGM) eMMC PHY
 
 maintainers:
   - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
index ce62c0b94daf..653a12286637 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-usb-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/intel,lgm-usb-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel LGM USB PHY Device Tree Bindings
+title: Intel LGM USB PHY
 
 maintainers:
   - Vadivel Murugan Ramuthevar <vadivel.muruganx.ramuthevar@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
new file mode 100644
index 000000000000..34bdb5c4cae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,phy-thunderbay-emmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay eMMC PHY bindings
+
+maintainers:
+  - Srikandan Nandhini <nandhini.srikandan@intel.com>
+
+properties:
+  compatible:
+    const: intel,thunderbay-emmc-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: emmcclk
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+     mmc_phy@80440800 {
+     #phy-cells = <0x0>;
+     compatible = "intel,thunderbay-emmc-phy";
+     status = "okay";
+     reg = <0x80440800 0x100>;
+     clocks = <&emmc>;
+     clock-names = "emmcclk";
+     };
diff --git a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
index a97482179cf5..711de06bb0fc 100644
--- a/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/lantiq,vrx200-pcie-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/lantiq,vrx200-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Lantiq VRX200 and ARX300 PCIe PHY Device Tree Bindings
+title: Lantiq VRX200 and ARX300 PCIe PHY
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
index 2437c3683326..632d61c07f40 100644
--- a/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml
@@ -45,7 +45,7 @@ additionalProperties: false
 examples:
   - |
     usb2_utmi_host_phy: phy@5f000 {
-      compatible = "marvell,armada-3700-utmi-host-phy";
+      compatible = "marvell,a3700-utmi-host-phy";
       reg = <0x5f000 0x800>;
       marvell,usb-misc-reg = <&usb2_syscon>;
       #phy-cells = <0>;
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index 6e4d795f9b02..9c2a7345955d 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -24,6 +24,10 @@ properties:
           - enum:
               - mediatek,mt7623-mipi-tx
           - const: mediatek,mt2701-mipi-tx
+      - items:
+          - enum:
+              - mediatek,mt8365-mipi-tx
+          - const: mediatek,mt8183-mipi-tx
       - const: mediatek,mt2701-mipi-tx
       - const: mediatek,mt8173-mipi-tx
       - const: mediatek,mt8183-mipi-tx
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
index 29d4123323c2..c2f4cb0b254a 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt7621-pci-phy.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/phy/mediatek,mt7621-pci-phy.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Mediatek Mt7621 PCIe PHY Device Tree Bindings
+title: Mediatek Mt7621 PCIe PHY
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
diff --git a/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
new file mode 100644
index 000000000000..422750cc4121
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIe PHY
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The PCIe PHY supports physical layer functionality for PCIe Gen3 port.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: sif
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cells:
+    maxItems: 7
+    description:
+      Phandles to nvmem cell that contains the efuse data, if unspecified,
+      default value is used.
+
+  nvmem-cell-names:
+    items:
+      - const: glb_intr
+      - const: tx_ln0_pmos
+      - const: tx_ln0_nmos
+      - const: rx_ln0
+      - const: tx_ln1_pmos
+      - const: tx_ln1_nmos
+      - const: rx_ln1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@11e80000 {
+        compatible = "mediatek,mt8195-pcie-phy";
+        #phy-cells = <0>;
+        reg = <0x11e80000 0x10000>;
+        reg-names = "sif";
+        nvmem-cells = <&pciephy_glb_intr>,
+                      <&pciephy_tx_ln0_pmos>,
+                      <&pciephy_tx_ln0_nmos>,
+                      <&pciephy_rx_ln0>,
+                      <&pciephy_tx_ln1_pmos>,
+                      <&pciephy_tx_ln1_nmos>,
+                      <&pciephy_rx_ln1>;
+        nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+                           "tx_ln0_nmos", "rx_ln0",
+                           "tx_ln1_pmos", "tx_ln1_nmos",
+                           "rx_ln1";
+        power-domains = <&spm 2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 9e6c0f43f1c6..5613cc5106e3 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek T-PHY Controller Device Tree Bindings
+title: MediaTek T-PHY Controller
 
 maintainers:
   - Chunfeng Yun <chunfeng.yun@mediatek.com>
@@ -80,9 +80,13 @@ properties:
               - mediatek,mt2712-tphy
               - mediatek,mt7629-tphy
               - mediatek,mt8183-tphy
+              - mediatek,mt8186-tphy
+              - mediatek,mt8192-tphy
+              - mediatek,mt8365-tphy
           - const: mediatek,generic-tphy-v2
       - items:
           - enum:
+              - mediatek,mt8188-tphy
               - mediatek,mt8195-tphy
           - const: mediatek,generic-tphy-v3
       - const: mediatek,mt2701-u3phy
@@ -159,6 +163,25 @@ patternProperties:
                 - PHY_TYPE_USB3
                 - PHY_TYPE_PCIE
                 - PHY_TYPE_SATA
+                - PHY_TYPE_SGMII
+
+      nvmem-cells:
+        items:
+          - description: internal R efuse for U2 PHY or U3/PCIe PHY
+          - description: rx_imp_sel efuse for U3/PCIe PHY
+          - description: tx_imp_sel efuse for U3/PCIe PHY
+        description: |
+          Phandles to nvmem cell that contains the efuse data;
+          Available only for U2 PHY or U3/PCIe PHY of version 2/3, these
+          three items should be provided at the same time for U3/PCIe PHY,
+          when use software to load efuse;
+          If unspecified, will use hardware auto-load efuse.
+
+      nvmem-cell-names:
+        items:
+          - const: intr
+          - const: rx_imp
+          - const: tx_imp
 
       # The following optional vendor properties are only for debug or HQA test
       mediatek,eye-src:
@@ -196,6 +219,16 @@ patternProperties:
         minimum: 1
         maximum: 15
 
+      mediatek,pre-emphasis:
+        description:
+          The level of pre-emphasis which used to widen the eye opening and
+          boost eye swing, the unit step is about 4.16% increment; e.g. the
+          level 1 means amplitude increases about 4.16%, the level 2 is about
+          8.3% etc. (U2 phy)
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 3
+
       mediatek,bc12:
         description:
           Specify the flag to enable BC1.2 if support it
diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
index 598fd2b95c29..a9e3139fd421 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek XS-PHY Controller Device Tree Bindings
+title: MediaTek XS-PHY Controller
 
 maintainers:
   - Chunfeng Yun <chunfeng.yun@mediatek.com>
diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 000000000000..6e914fbbac56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+  3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+  Also it has 8 logical Ethernet ports which can be connected to these
+  interfaces. The Serdes controller will allow to configure these interfaces
+  and allows to "mux" the interfaces to different ports.
+
+  For simple selection of the interface that is used with a port, the
+  following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+  number that represents the index of that interface type. For example
+  CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+  interface SerDes 2.
+
+properties:
+  $nodename:
+    pattern: "^serdes@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-serdes
+
+  reg:
+    items:
+      - description: HSIO registers
+      - description: HW_STAT register
+
+  '#phy-cells':
+    const: 2
+    description: |
+      - Input port to use for a given macro.
+      - The macro to be used. The macros are defined in
+        dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    serdes: serdes@e2004010 {
+      compatible = "microchip,lan966x-serdes";
+      reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+      #phy-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
deleted file mode 100644
index 9b23407233c0..000000000000
--- a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Mixel DSI PHY for i.MX8
-
-The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
-MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
-electrical signals for DSI.
-
-Required properties:
-- compatible: Must be:
-  - "fsl,imx8mq-mipi-dphy"
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must contain the following entries:
-  - "phy_ref": phandle and specifier referring to the DPHY ref clock
-- reg: the register range of the PHY controller
-- #phy-cells: number of cells in PHY, as defined in
-  Documentation/devicetree/bindings/phy/phy-bindings.txt
-  this must be <0>
-
-Optional properties:
-- power-domains: phandle to power domain
-
-Example:
-	dphy: dphy@30a0030 {
-		compatible = "fsl,imx8mq-mipi-dphy";
-		clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
-		clock-names = "phy_ref";
-		reg = <0x30a00300 0x100>;
-		power-domains = <&pd_mipi0>;
-		#phy-cells = <0>;
-        };
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
new file mode 100644
index 000000000000..786cfd71cb7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mixel,mipi-dsi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mixel DSI PHY for i.MX8
+
+maintainers:
+  - Guido Günther <agx@sigxcpu.org>
+
+description: |
+  The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+  MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+  electrical signals for DSI.
+
+  The Mixel PHY IP block found on i.MX8qxp is a combo PHY that can work
+  in either MIPI-DSI PHY mode or LVDS PHY mode.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-dphy
+      - fsl,imx8qxp-mipi-dphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phy_ref
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  fsl,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to Control and Status Registers(CSR) module.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mq-mipi-dphy
+    then:
+      properties:
+        fsl,syscon: false
+
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+        - assigned-clock-rates
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-dphy
+    then:
+      properties:
+        assigned-clocks: false
+        assigned-clock-parents: false
+        assigned-clock-rates: false
+
+      required:
+        - fsl,syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    dphy: dphy@30a0030 {
+        compatible = "fsl,imx8mq-mipi-dphy";
+        reg = <0x30a00300 0x100>;
+        clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+        clock-names = "phy_ref";
+        assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+        assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+        assigned-clock-rates = <24000000>;
+        #phy-cells = <0>;
+        power-domains = <&pgc_mipi>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
new file mode 100644
index 000000000000..3169b873231e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mscc,vsc7514-serdes.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mscc,vsc7514-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot SerDes muxing
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  On Microsemi Ocelot, there is a handful of registers in HSIO address
+  space for setting up the SerDes to switch port muxing.
+
+  A SerDes X can be "muxed" to work with switch port Y or Z for example.
+  One specific SerDes can also be used as a PCIe interface.
+
+  Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
+
+  There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
+  half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
+  10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
+
+  Also, SERDES6G number (aka "macro") 0 is the only interface supporting
+  QSGMII.
+
+  This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
+  Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7514-serdes
+
+  "#phy-cells":
+    const: 2
+    description: |
+      The first number defines the input port to use for a given SerDes macro.
+      The second defines the macro to use. They are defined in
+      dt-bindings/phy/phy-ocelot-serdes.h
+
+required:
+  - compatible
+  - "#phy-cells"
+
+additionalProperties:
+  false
+
+examples:
+  - |
+    serdes: serdes {
+      compatible = "mscc,vsc7514-serdes";
+      #phy-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
index c9f5c0caf8a9..70c813b0755f 100644
--- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt
@@ -8,16 +8,17 @@ Required properties:
 	* "fsl,vf610-usbphy" for Vybrid vf610
 	* "fsl,imx6sx-usbphy" for imx6sx
 	* "fsl,imx7ulp-usbphy" for imx7ulp
+	* "fsl,imx8dxl-usbphy" for imx8dxl
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
 - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series
 
 Optional properties:
-- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dn-ohms: Integer [35-54]. Resistance (in ohms) of switchable
   high-speed trimming resistor connected in parallel with the 45 ohm resistor
   that terminates the DN output signal. Default: 45
-- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable
+- fsl,tx-cal-45-dp-ohms: Integer [35-54]. Resistance (in ohms) of switchable
   high-speed trimming resistor connected in parallel with the 45 ohm resistor
   that terminates the DP output signal. Default: 45
 - fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of
diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
index dfde0eaf66e1..d61585c96e31 100644
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.yaml
@@ -275,17 +275,17 @@ allOf:
           - nvidia,hssquelch-level
           - nvidia,hsdiscon-level
 
-        else:
-          properties:
-            clocks:
-              maxItems: 4
+      else:
+        properties:
+          clocks:
+            maxItems: 4
 
-            clock-names:
-              items:
-                - const: reg
-                - const: pll_u
-                - const: timer
-                - const: utmi-pads
+          clock-names:
+            items:
+              - const: reg
+              - const: pll_u
+              - const: timer
+              - const: utmi-pads
 
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
index e71b32c9c0d1..a9e227d8b076 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
@@ -113,6 +113,15 @@ patternProperties:
         minimum: 1
         maximum: 16
 
+      cdns,ssc-mode:
+        description:
+          Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC,
+          EXTERNAL_SSC or INTERNAL_SSC.
+          Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 1
+
     required:
       - reg
       - resets
diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
index bd9ae11c9994..2fec9e54ad0e 100644
--- a/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
@@ -202,7 +202,7 @@ examples:
                 #phy-cells = <0>;
                 cdns,phy-type = <PHY_TYPE_PCIE>;
                 cdns,num-lanes = <2>;
-                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
             };
 
             phy@2 {
@@ -211,7 +211,7 @@ examples:
                 #phy-cells = <0>;
                 cdns,phy-type = <PHY_TYPE_SGMII>;
                 cdns,num-lanes = <1>;
-                cdns,ssc-mode = <TORRENT_SERDES_NO_SSC>;
+                cdns,ssc-mode = <CDNS_SERDES_NO_SSC>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt b/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
deleted file mode 100644
index 332219860187..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-ocelot-serdes.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Microsemi Ocelot SerDes muxing driver
--------------------------------------
-
-On Microsemi Ocelot, there is a handful of registers in HSIO address
-space for setting up the SerDes to switch port muxing.
-
-A SerDes X can be "muxed" to work with switch port Y or Z for example.
-One specific SerDes can also be used as a PCIe interface.
-
-Hence, a SerDes represents an interface, be it an Ethernet or a PCIe one.
-
-There are two kinds of SerDes: SERDES1G supports 10/100Mbps in
-half/full-duplex and 1000Mbps in full-duplex mode while SERDES6G supports
-10/100Mbps in half/full-duplex and 1000/2500Mbps in full-duplex mode.
-
-Also, SERDES6G number (aka "macro") 0 is the only interface supporting
-QSGMII.
-
-This is a child of the HSIO syscon ("mscc,ocelot-hsio", see
-Documentation/devicetree/bindings/mips/mscc.txt) on the Microsemi Ocelot.
-
-Required properties:
-
-- compatible: should be "mscc,vsc7514-serdes"
-- #phy-cells : from the generic phy bindings, must be 2.
-	       The first number defines the input port to use for a given
-	       SerDes macro. The second defines the macro to use. They are
-	       defined in dt-bindings/phy/phy-ocelot-serdes.h
-
-Example:
-
-	serdes: serdes {
-		compatible = "mscc,vsc7514-serdes";
-		#phy-cells = <2>;
-	};
-
-	ethernet {
-		port1 {
-			phy-handle = <&phy_foo>;
-			/* Link SERDES1G_5 to port1 */
-			phys = <&serdes 1 SERDES1G_5>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index 5bebd86bf8b6..f71920082fa3 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -13,11 +13,13 @@ properties:
   compatible:
     enum:
       - rockchip,px30-usb2phy
+      - rockchip,rk3128-usb2phy
       - rockchip,rk3228-usb2phy
       - rockchip,rk3308-usb2phy
       - rockchip,rk3328-usb2phy
       - rockchip,rk3366-usb2phy
       - rockchip,rk3399-usb2phy
+      - rockchip,rk3568-usb2phy
       - rockchip,rv1108-usb2phy
 
   reg:
@@ -50,6 +52,10 @@ properties:
     description:
       Phandle to the extcon device providing the cable state for the otg phy.
 
+  interrupts:
+    description: Muxed interrupt for both ports
+    maxItems: 1
+
   rockchip,usbgrf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -67,6 +73,7 @@ properties:
 
       interrupts:
         description: host linestate interrupt
+        maxItems: 1
 
       interrupt-names:
         const: linestate
@@ -78,8 +85,6 @@ properties:
 
     required:
       - "#phy-cells"
-      - interrupts
-      - interrupt-names
 
   otg-port:
     type: object
@@ -109,8 +114,6 @@ properties:
 
     required:
       - "#phy-cells"
-      - interrupts
-      - interrupt-names
 
 required:
   - compatible
@@ -120,6 +123,40 @@ required:
   - host-port
   - otg-port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-usb2phy
+
+    then:
+      properties:
+        host-port:
+          properties:
+            interrupts: false
+
+        otg-port:
+          properties:
+            interrupts: false
+
+      required:
+        - interrupts
+
+    else:
+      properties:
+        interrupts: false
+
+        host-port:
+          required:
+            - interrupts
+            - interrupt-names
+
+        otg-port:
+          required:
+            - interrupts
+            - interrupt-names
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
new file mode 100644
index 000000000000..8d8698412de0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/phy-rockchip-naneng-combphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC Naneng Combo Phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-naneng-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: apb clock
+      - description: pipe clock
+
+  clock-names:
+    items:
+      - const: ref
+      - const: apb
+      - const: pipe
+
+  resets:
+    items:
+      - description: exclusive PHY reset line
+
+  rockchip,enable-ssc:
+    type: boolean
+    description:
+      The option SSC can be enabled for U3, SATA and PCIE.
+      Most commercially available platforms use SSC to reduce EMI.
+
+  rockchip,ext-refclk:
+    type: boolean
+    description:
+      Many PCIe connections, especially backplane connections,
+      require a synchronous reference clock between the two link partners.
+      To achieve this a common clock source, referred to as REFCLK in
+      the PCI Express Card Electromechanical Specification,
+      should be used by both ends of the PCIe link.
+      In PCIe mode one can choose to use an internal or an external reference
+      clock.
+      By default the internal clock is selected. The PCIe PHY provides a 100MHz
+      differential clock output(optional with SSC) for system applications.
+      When selecting this option an externally 100MHz differential
+      reference clock needs to be provided to the PCIe PHY.
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional phy settings are accessed through GRF regs.
+
+  rockchip,pipe-phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some additional pipe settings are accessed through GRF regs.
+
+  "#phy-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - rockchip,pipe-grf
+  - rockchip,pipe-phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+
+    pipegrf: syscon@fdc50000 {
+      compatible = "rockchip,rk3568-pipe-grf", "syscon";
+      reg = <0xfdc50000 0x1000>;
+    };
+
+    pipe_phy_grf0: syscon@fdc70000 {
+      compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+      reg = <0xfdc70000 0x1000>;
+    };
+
+    combphy0: phy@fe820000 {
+      compatible = "rockchip,rk3568-naneng-combphy";
+      reg = <0xfe820000 0x100>;
+      clocks = <&pmucru CLK_PCIEPHY0_REF>,
+               <&cru PCLK_PIPEPHY0>,
+               <&cru PCLK_PIPE>;
+      clock-names = "ref", "apb", "pipe";
+      assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+      assigned-clock-rates = <100000000>;
+      resets = <&cru SRST_PIPEPHY0>;
+      rockchip,pipe-grf = <&pipegrf>;
+      rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+      #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
index de6a706abcdb..35f03df00130 100644
--- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -9,7 +9,7 @@ Required properties:
 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
 			  for the whole phy and one for the port
 - reset-names		: list of reset signal names. Should be "global" and "port"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
index 267b695215b6..801993813b18 100644
--- a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.yaml
@@ -76,8 +76,9 @@ patternProperties:
 
       connector:
         type: object
-        allOf:
-          - $ref: ../connector/usb-connector.yaml
+        $ref: /schemas/connector/usb-connector.yaml
+        unevaluatedProperties: false
+
         properties:
           vbus-supply: true
 
diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
deleted file mode 100644
index d23ff90baad5..000000000000
--- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NVIDIA Tegra194 P2U binding
-
-Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
-Speed) each interfacing with 12 and 8 P2U instances respectively.
-A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
-interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe
-lane.
-
-Required properties:
-- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u".
-- reg: Should be the physical address space and length of respective each P2U
-       instance.
-- reg-names: Must include the entry "ctl".
-
-Required properties for PHY port node:
-- #phy-cells: Defined by generic PHY bindings.  Must be 0.
-
-Refer to phy/phy-bindings.txt for the generic PHY binding properties.
-
-Example:
-
-p2u_hsio_0: phy@3e10000 {
-	compatible = "nvidia,tegra194-p2u";
-	reg = <0x03e10000 0x10000>;
-	reg-names = "ctl";
-
-	#phy-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
new file mode 100644
index 000000000000..4dc5205d893b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-tegra194-p2u.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra194 & Tegra234 P2U binding
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
+  Speed) each interfacing with 12 and 8 P2U instances respectively.
+  Tegra234 has three PHY bricks namely HSIO, NVHS and GBE (Gigabit Ethernet)
+  each interfacing with 8, 8 and 8 P2U instances respectively.
+  A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
+  interface and PHY of HSIO/NVHS/GBE bricks. Each P2U instance represents one
+  PCIe lane.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-p2u
+      - nvidia,tegra234-p2u
+
+  reg:
+    maxItems: 1
+    description: Should be the physical address space and length of respective each P2U instance.
+
+  reg-names:
+    items:
+      - const: ctl
+
+  nvidia,skip-sz-protect-en:
+    description: Should be present if two PCIe retimers are present between
+      the root port and its immediate downstream device.
+    type: boolean
+
+  '#phy-cells':
+    const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    p2u_hsio_0: phy@3e10000 {
+        compatible = "nvidia,tegra194-p2u";
+        reg = <0x03e10000 0x10000>;
+        reg-names = "ctl";
+
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
new file mode 100644
index 000000000000..1e104ae76ee6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/qcom,edp-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm eDP PHY
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm eDP PHY is found in a number of Qualcomm platform and provides
+  the physical interface for Embedded Display Port.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-edp-phy
+      - qcom,sc8180x-edp-phy
+      - qcom,sc8280xp-dp-phy
+      - qcom,sc8280xp-edp-phy
+
+  reg:
+    items:
+      - description: PHY base register block
+      - description: tx0 register block
+      - description: tx1 register block
+      - description: PLL register block
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdda-phy-supply: true
+  vdda-pll-supply: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@aec2a00 {
+      compatible = "qcom,sc8180x-edp-phy";
+      reg = <0x0aec2a00 0x1c0>,
+            <0x0aec2200 0xa0>,
+            <0x0aec2600 0xa0>,
+            <0x0aec2000 0x19c>;
+
+      clocks = <&dispcc 0>, <&dispcc 1>;
+      clock-names = "aux", "cfg_ahb";
+
+      #clock-cells = <1>;
+      #phy-cells = <0>;
+
+      vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+      vdda-pll-supply = <&vdd_a_edp_0_0p9>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
new file mode 100644
index 000000000000..fdb277edebeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8660
+      - qcom,hdmi-phy-8960
+      - qcom,hdmi-phy-8974
+      - qcom,hdmi-phy-8084
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hdmi_phy
+      - const: hdmi_pll
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#phy-cells':
+    const: 0
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8660
+              - qcom,hdmi-phy-8960
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: slave_iface
+        vddio-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-phy-8084
+              - qcom,hdmi-phy-8974
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: iface
+            - const: alt_iface
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_phy: phy@4a00400 {
+      compatible = "qcom,hdmi-phy-8960";
+      reg-names = "hdmi_phy",
+                  "hdmi_pll";
+      reg = <0x4a00400 0x60>,
+            <0x4a00500 0x100>;
+      #phy-cells = <0>;
+      power-domains = <&mmcc 1>;
+      clock-names = "slave_iface";
+      clocks = <&clk 21>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
new file mode 100644
index 000000000000..83fe4b39b56f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/phy/qcom,hdmi-phy-qmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon QMP HDMI phy
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-phy-8996
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: hdmi_pll
+      - const: hdmi_tx_l0
+      - const: hdmi_tx_l1
+      - const: hdmi_tx_l2
+      - const: hdmi_tx_l3
+      - const: hdmi_phy
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: ref
+      - const: xo
+
+  power-domains:
+    maxItems: 1
+
+  vcca-supply:
+    description: phandle to VCCA supply regulator
+
+  vddio-supply:
+    description: phandle to VDD I/O supply regulator
+
+  '#clock-cells':
+    const: 0
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi-phy@9a0600 {
+      compatible = "qcom,hdmi-phy-8996";
+      reg = <0x009a0600 0x1c4>,
+            <0x009a0a00 0x124>,
+            <0x009a0c00 0x124>,
+            <0x009a0e00 0x124>,
+            <0x009a1000 0x124>,
+            <0x009a1200 0x0c8>;
+      reg-names = "hdmi_pll",
+                  "hdmi_tx_l0",
+                  "hdmi_tx_l1",
+                  "hdmi_tx_l2",
+                  "hdmi_tx_l3",
+                  "hdmi_phy";
+
+      clocks = <&mmcc 116>,
+               <&gcc 214>,
+               <&xo_board>;
+      clock-names = "iface",
+                    "ref",
+                    "xo";
+      #clock-cells = <0>;
+      #phy-cells = <0>;
+
+      vddio-supply = <&vreg_l12a_1p8>;
+      vcca-supply = <&vreg_l28a_0p925>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
new file mode 100644
index 000000000000..4e710ef75523
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (MSM8996 PCIe)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    const: qcom,msm8996-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+      - const: cfg
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: one child node per PHY provided by this block
+    properties:
+      reg:
+        items:
+          - description: TX
+          - description: RX
+          - description: PCS
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - enum:
+              - pipe0
+              - pipe1
+              - pipe2
+
+      resets:
+        items:
+          - description: PHY reset
+
+      reset-names:
+        deprecated: true
+        items:
+          - enum:
+              - lane0
+              - lane1
+              - lane2
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - resets
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    pcie_phy: phy-wrapper@34000 {
+        compatible = "qcom,msm8996-qmp-pcie-phy";
+        reg = <0x34000 0x488>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x34000 0x4000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_CLKREF_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref";
+
+        resets = <&gcc GCC_PCIE_PHY_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+        reset-names = "phy", "common", "cfg";
+
+        vdda-phy-supply = <&vreg_l28a_0p925>;
+        vdda-pll-supply = <&vreg_l12a_1p8>;
+
+        pciephy_0: phy@1000 {
+            reg = <0x1000 0x130>,
+                  <0x1200 0x200>,
+                  <0x1400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_0_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_1: phy@2000 {
+            reg = <0x2000 0x130>,
+                  <0x2200 0x200>,
+                  <0x2400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_2: phy@3000 {
+            reg = <0x3000 0x130>,
+                  <0x3200 0x200>,
+                  <0x3400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+            resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_2_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
new file mode 100644
index 000000000000..324ad7d03a38
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
@@ -0,0 +1,296 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-pcie-phy
+      - qcom,ipq8074-qmp-gen3-pcie-phy
+      - qcom,ipq8074-qmp-pcie-phy
+      - qcom,msm8998-qmp-pcie-phy
+      - qcom,sc8180x-qmp-pcie-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdx55-qmp-pcie-phy
+      - qcom,sm8250-qmp-gen3x1-pcie-phy
+      - qcom,sm8250-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen4x2-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-gen3-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: refgen
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
+              - qcom,msm8998-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    phy-wrapper@1c0e000 {
+        compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+        reg = <0x01c0e000 0x1c0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x01c0e000 0x1000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+                 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+        resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+        reset-names = "phy";
+
+        vdda-phy-supply = <&vreg_l10c_0p88>;
+        vdda-pll-supply = <&vreg_l6b_1p2>;
+
+        phy@200 {
+            reg = <0x200 0x170>,
+                  <0x400 0x200>,
+                  <0xa00 0x1f0>,
+                  <0x600 0x170>,
+                  <0x800 0x200>,
+                  <0xe00 0xf4>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk";
+
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
deleted file mode 100644
index 630ceaf915e2..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ /dev/null
@@ -1,487 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: Qualcomm QMP PHY controller
-
-maintainers:
-  - Vinod Koul <vkoul@kernel.org>
-
-description:
-  QMP phy controller supports physical layer functionality for a number of
-  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-properties:
-  compatible:
-    enum:
-      - qcom,ipq6018-qmp-pcie-phy
-      - qcom,ipq6018-qmp-usb3-phy
-      - qcom,ipq8074-qmp-pcie-phy
-      - qcom,ipq8074-qmp-usb3-phy
-      - qcom,msm8996-qmp-pcie-phy
-      - qcom,msm8996-qmp-ufs-phy
-      - qcom,msm8996-qmp-usb3-phy
-      - qcom,msm8998-qmp-pcie-phy
-      - qcom,msm8998-qmp-ufs-phy
-      - qcom,msm8998-qmp-usb3-phy
-      - qcom,qcm2290-qmp-usb3-phy
-      - qcom,sc7180-qmp-usb3-phy
-      - qcom,sc8180x-qmp-pcie-phy
-      - qcom,sc8180x-qmp-ufs-phy
-      - qcom,sc8180x-qmp-usb3-phy
-      - qcom,sdm845-qhp-pcie-phy
-      - qcom,sdm845-qmp-pcie-phy
-      - qcom,sdm845-qmp-ufs-phy
-      - qcom,sdm845-qmp-usb3-phy
-      - qcom,sdm845-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-ufs-phy
-      - qcom,sm8150-qmp-ufs-phy
-      - qcom,sm8150-qmp-usb3-phy
-      - qcom,sm8150-qmp-usb3-uni-phy
-      - qcom,sm8250-qmp-ufs-phy
-      - qcom,sm8250-qmp-gen3x1-pcie-phy
-      - qcom,sm8250-qmp-gen3x2-pcie-phy
-      - qcom,sm8250-qmp-modem-pcie-phy
-      - qcom,sm8250-qmp-usb3-phy
-      - qcom,sm8250-qmp-usb3-uni-phy
-      - qcom,sm8350-qmp-ufs-phy
-      - qcom,sm8350-qmp-usb3-phy
-      - qcom,sm8350-qmp-usb3-uni-phy
-      - qcom,sdx55-qmp-pcie-phy
-      - qcom,sdx55-qmp-usb3-uni-phy
-
-  reg:
-    minItems: 1
-    items:
-      - description: Address and length of PHY's common serdes block.
-      - description: Address and length of PHY's DP_COM control block.
-
-  "#clock-cells":
-    enum: [ 1, 2 ]
-
-  "#address-cells":
-    enum: [ 1, 2 ]
-
-  "#size-cells":
-    enum: [ 1, 2 ]
-
-  ranges: true
-
-  clocks:
-    minItems: 1
-    maxItems: 4
-
-  clock-names:
-    minItems: 1
-    maxItems: 4
-
-  resets:
-    minItems: 1
-    maxItems: 3
-
-  reset-names:
-    minItems: 1
-    maxItems: 3
-
-  vdda-phy-supply:
-    description:
-      Phandle to a regulator supply to PHY core block.
-
-  vdda-pll-supply:
-    description:
-      Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-  vddp-ref-clk-supply:
-    description:
-      Phandle to a regulator supply to any specific refclk pll block.
-
-#Required nodes:
-patternProperties:
-  "^phy@[0-9a-f]+$":
-    type: object
-    description:
-      Each device node of QMP phy is required to have as many child nodes as
-      the number of lanes the PHY has.
-
-required:
-  - compatible
-  - reg
-  - "#clock-cells"
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-  - clocks
-  - clock-names
-  - resets
-  - reset-names
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm845-qmp-usb3-uni-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdx55-qmp-usb3-uni-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-            - description: phy's ahb cfg block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-            - const: cfg
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq8074-qmp-usb3-phy
-              - qcom,msm8996-qmp-usb3-phy
-              - qcom,msm8998-qmp-pcie-phy
-              - qcom,msm8998-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: 19.2 MHz ref clk.
-        clock-names:
-          items:
-            - const: ref
-        resets:
-          items:
-            - description: PHY reset in the UFS controller.
-        reset-names:
-          items:
-            - const: ufsphy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
-              - qcom,sdm845-qmp-ufs-phy
-              - qcom,sm8150-qmp-ufs-phy
-              - qcom,sm8250-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: 19.2 MHz ref clk.
-            - description: Phy reference aux clock.
-        clock-names:
-          items:
-            - const: ref
-            - const: ref_aux
-        resets:
-          items:
-            - description: PHY reset in the UFS controller.
-        reset-names:
-          items:
-            - const: ufsphy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq6018-qmp-pcie-phy
-              - qcom,ipq8074-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8180x-qmp-pcie-phy
-              - qcom,sdm845-qhp-pcie-phy
-              - qcom,sdm845-qmp-pcie-phy
-              - qcom,sdx55-qmp-pcie-phy
-              - qcom,sm8250-qmp-gen3x1-pcie-phy
-              - qcom,sm8250-qmp-gen3x2-pcie-phy
-              - qcom,sm8250-qmp-modem-pcie-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy refgen clk.
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-            - const: refgen
-        resets:
-          items:
-            - description: reset of phy block.
-        reset-names:
-          items:
-            - const: phy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sm8150-qmp-usb3-phy
-              - qcom,sm8150-qmp-usb3-uni-phy
-              - qcom,sm8250-qmp-usb3-uni-phy
-              - qcom,sm8350-qmp-usb3-uni-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: 19.2 MHz ref clk source.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
-        clock-names:
-          items:
-            - const: aux
-            - const: ref_clk_src
-            - const: ref
-            - const: com_aux
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sm8250-qmp-usb3-phy
-              - qcom,sm8350-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
-        clock-names:
-          items:
-            - const: aux
-            - const: ref_clk_src
-            - const: com_aux
-        resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,qcm2290-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
-        clock-names:
-          items:
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-        resets:
-          items:
-            - description: phy_phy reset.
-            - description: reset of phy block.
-        reset-names:
-          items:
-            - const: phy_phy
-            - const: phy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    usb_2_qmpphy: phy-wrapper@88eb000 {
-        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-        reg = <0x088eb000 0x18c>;
-        #clock-cells = <1>;
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0x0 0x088eb000 0x2000>;
-
-        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
-                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-                 <&gcc GCC_USB3_PHY_SEC_BCR>;
-        reset-names = "phy", "common";
-
-        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
-        vdda-pll-supply = <&vdda_usb2_ss_core>;
-
-        usb_2_ssphy: phy@200 {
-                reg = <0x200 0x128>,
-                      <0x400 0x1fc>,
-                      <0x800 0x218>,
-                      <0x600 0x70>;
-                #clock-cells = <0>;
-                #phy-cells = <0>;
-                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-                clock-names = "pipe0";
-                clock-output-names = "usb3_uni_phy_pipe_clk_src";
-            };
-        };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
new file mode 100644
index 000000000000..815c375d0f7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
@@ -0,0 +1,240 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (UFS)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-qmp-ufs-phy
+      - qcom,msm8998-qmp-ufs-phy
+      - qcom,sc8180x-qmp-ufs-phy
+      - qcom,sc8280xp-qmp-ufs-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sm6115-qmp-ufs-phy
+      - qcom,sm6350-qmp-ufs-phy
+      - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8250-qmp-ufs-phy
+      - qcom,sm8350-qmp-ufs-phy
+      - qcom,sm8450-qmp-ufs-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ufsphy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+            - const: qref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+              - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    phy-wrapper@1d87000 {
+        compatible = "qcom,sc8280xp-qmp-ufs-phy";
+        reg = <0x01d87000 0xe10>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x01d87000 0x1000>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+        clock-names = "ref", "ref_aux";
+
+        resets = <&ufs_mem_hc 0>;
+        reset-names = "ufsphy";
+
+        vdda-phy-supply = <&vreg_l6b>;
+        vdda-pll-supply = <&vreg_l3b>;
+
+        phy@400 {
+            reg = <0x400 0x108>,
+                  <0x600 0x1e0>,
+                  <0xc00 0x1dc>,
+                  <0x800 0x108>,
+                  <0xa00 0x1e0>;
+            #phy-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
new file mode 100644
index 000000000000..7acb4b7de7f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
@@ -0,0 +1,401 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (USB)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-usb3-phy
+      - qcom,ipq8074-qmp-usb3-phy
+      - qcom,msm8996-qmp-usb3-phy
+      - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
+      - qcom,sc7180-qmp-usb3-phy
+      - qcom,sc8180x-qmp-usb3-phy
+      - qcom,sc8280xp-qmp-usb3-uni-phy
+      - qcom,sdm845-qmp-usb3-phy
+      - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sdx55-qmp-usb3-uni-phy
+      - qcom,sdx65-qmp-usb3-uni-phy
+      - qcom,sm8150-qmp-usb3-phy
+      - qcom,sm8150-qmp-usb3-uni-phy
+      - qcom,sm8250-qmp-usb3-phy
+      - qcom,sm8250-qmp-usb3-uni-phy
+      - qcom,sm8350-qmp-usb3-phy
+      - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,sm8450-qmp-usb3-phy
+
+  reg:
+    minItems: 1
+    items:
+      - description: serdes
+      - description: DP_COM
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    maxItems: 2
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        deprecated: true
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy_phy
+            - const: phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+              - qcom,sm8450-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-usb3-phy
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sc7180-qmp-usb3-phy
+              - qcom,sc8180x-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    usb_2_qmpphy: phy-wrapper@88eb000 {
+        compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+        reg = <0x088eb000 0x18c>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x088eb000 0x2000>;
+
+        clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK >,
+                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+                 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+                 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+        resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+                 <&gcc GCC_USB3_PHY_SEC_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+        vdda-pll-supply = <&vdda_usb2_ss_core>;
+
+        usb_2_ssphy: phy@200 {
+                reg = <0x200 0x128>,
+                      <0x400 0x1fc>,
+                      <0x800 0x218>,
+                      <0x600 0x70>;
+
+                clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+
+                #clock-cells = <0>;
+                clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+                #phy-cells = <0>;
+            };
+        };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
index 60dc27834e1d..97a7ecafbf85 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QMP USB3 DP PHY controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 properties:
   compatible:
@@ -16,6 +16,7 @@ properties:
       - qcom,sc7180-qmp-usb3-dp-phy
       - qcom,sc7280-qmp-usb3-dp-phy
       - qcom,sc8180x-qmp-usb3-dp-phy
+      - qcom,sc8280xp-qmp-usb43dp-phy
       - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sm8250-qmp-usb3-dp-phy
   reg:
@@ -30,9 +31,6 @@ properties:
       - const: dp_com
       - const: dp
 
-  "#clock-cells":
-    enum: [ 1, 2 ]
-
   "#address-cells":
     enum: [ 1, 2 ]
 
@@ -55,6 +53,9 @@ properties:
       - const: ref
       - const: com_aux
 
+  power-domains:
+    maxItems: 1
+
   resets:
     items:
       - description: reset of phy block.
@@ -81,6 +82,7 @@ properties:
 patternProperties:
   "^usb3-phy@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description:
       The USB3 PHY.
 
@@ -99,6 +101,7 @@ patternProperties:
           - description: pipe clock
 
       clock-names:
+        deprecated: true
         items:
           - const: pipe0
 
@@ -115,12 +118,12 @@ patternProperties:
     required:
       - reg
       - clocks
-      - clock-names
       - '#clock-cells'
       - '#phy-cells'
 
   "^dp-phy@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description:
       The DP PHY.
 
@@ -147,7 +150,6 @@ patternProperties:
 required:
   - compatible
   - reg
-  - "#clock-cells"
   - "#address-cells"
   - "#size-cells"
   - ranges
@@ -160,6 +162,17 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-usb43dp-phy
+    then:
+      required:
+        - power-domains
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
@@ -169,7 +182,6 @@ examples:
               <0x088e8000 0x10>,
               <0x088ea000 0x40>;
         reg-names = "usb", "dp_com", "dp";
-        #clock-cells = <1>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x088e9000 0x2000>;
@@ -197,7 +209,6 @@ examples:
             #clock-cells = <0>;
             #phy-cells = <0>;
             clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-            clock-names = "pipe0";
             clock-output-names = "usb3_phy_pipe_clk_src";
         };
 
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index aa2e409a1a09..636ea430fbff 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm QUSB2 phy controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description:
   QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
@@ -19,6 +19,7 @@ properties:
       - items:
           - enum:
               - qcom,ipq8074-qusb2-phy
+              - qcom,msm8953-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
               - qcom,qcm2290-qusb2-phy
@@ -29,7 +30,9 @@ properties:
       - items:
           - enum:
               - qcom,sc7180-qusb2-phy
+              - qcom,sdm670-qusb2-phy
               - qcom,sdm845-qusb2-phy
+              - qcom,sm6350-qusb2-phy
           - const: qcom,qusb2-v2-phy
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
deleted file mode 100644
index b3b75c1e6285..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Qualcomm's USB HS PHY
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
-                following:
-
-                        "qcom,usb-hs-phy-apq8064"
-                        "qcom,usb-hs-phy-msm8916"
-                        "qcom,usb-hs-phy-msm8974"
-
-- #phy-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain 0
-
-- clocks:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain clock specifier for the reference and sleep
-                clocks
-
-- clock-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "ref" and "sleep" for the reference and sleep
-                clocks respectively
-
-- resets:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the phy and POR resets
-
-- reset-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "phy" and "por" for the phy and POR resets
-                respectively
-
-- v3p3-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 3.3V supply
-
-- v1p8-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 1.8V supply
-
-- extcon:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: Should contain the vbus extcon
-
-- qcom,init-seq:
-    Usage: optional
-    Value type: <u8 array>
-    Definition: Should contain a sequence of ULPI address and value pairs to
-                program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
-                to Device Mode Eye Diagram test. The addresses are offsets
-                from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
-                <0x1 0x53> would mean "write the value 0x53 to address 0x81".
-
-EXAMPLE
-
-otg: usb-controller {
-	ulpi {
-		phy {
-			compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
-			#phy-cells = <0>;
-			clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "ref", "sleep";
-			resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-			reset-names = "phy", "por";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
new file mode 100644
index 000000000000..0655e485b260
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,usb-hs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's USB HS PHY binding description
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: qcom,usb-hs-phy-apq8064
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    reset-names:
+      const: por
+
+else:
+  properties:
+    resets:
+      minItems: 2
+      maxItems: 2
+
+    reset-names:
+      items:
+        - const: phy
+        - const: por
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,usb-hs-phy-apq8064
+          - qcom,usb-hs-phy-msm8226
+          - qcom,usb-hs-phy-msm8916
+          - qcom,usb-hs-phy-msm8974
+      - const: qcom,usb-hs-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+    contains:
+      items:
+        - const: ref
+        - const: sleep
+
+  resets: true
+
+  reset-names: true
+
+  v1p8-supply: true
+
+  v3p3-supply: true
+
+  extcon: true
+
+  "#phy-cells":
+    const: 0
+
+  qcom,init-seq:
+    $ref: /schemas/types.yaml#/definitions/uint8-matrix
+    description: >
+      Sequence of ULPI address and value pairs to
+      program into the ULPI_EXT_VENDOR_SPECIFIC area.
+      This is related to Device Mode Eye Diagram test.
+    maxItems: 32 # no hard limit
+    items:
+      items:
+        - description: >
+            the address is offset from the ULPI_EXT_VENDOR_SPECIFIC address
+        - description: value
+
+required:
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    otg: usb-controller {
+      #reset-cells = <1>;
+
+      ulpi {
+        phy {
+          compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
+          #phy-cells = <0>;
+          clocks = <&clk 0>, <&clk 258>;
+          clock-names = "ref", "sleep";
+          resets = <&gcc 10>, <&otg 0>;
+          reset-names = "phy", "por";
+          v3p3-supply = <&pm8941_l24>;
+          v1p8-supply = <&pm8941_l6>;
+          extcon = <&smbb>;
+          qcom,init-seq = /bits/ 8 <0x1 0x63>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
index 20203a8a9e41..68e70961beb2 100644
--- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
@@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Synopsys Femto High-Speed USB PHY V2
 
 maintainers:
-  - Wesley Cheng <wcheng@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description: |
   Qualcomm High-Speed USB PHY
@@ -15,11 +15,16 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,usb-snps-hs-5nm-phy
       - qcom,usb-snps-hs-7nm-phy
       - qcom,sc7280-usb-hs-phy
+      - qcom,sc8180x-usb-hs-phy
+      - qcom,sc8280xp-usb-hs-phy
+      - qcom,sm6375-usb-hs-phy
       - qcom,sm8150-usb-hs-phy
       - qcom,sm8250-usb-hs-phy
       - qcom,sm8350-usb-hs-phy
+      - qcom,sm8450-usb-hs-phy
       - qcom,usb-snps-femto-v2-phy
 
   reg:
@@ -49,6 +54,94 @@ properties:
   vdda33-supply:
     description: phandle to the regulator 3.3V supply node.
 
+  qcom,hs-disconnect-bp:
+    description:
+      This adjusts the voltage level for the threshold used to
+      detect a disconnect event at the host.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -272
+    maximum: 2156
+
+  qcom,squelch-detector-bp:
+    description:
+      This adjusts the voltage level for the threshold used to
+      detect valid high-speed data.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -2090
+    maximum: 1590
+
+  qcom,hs-amplitude-bp:
+    description:
+      This adjusts the high-speed DC level voltage.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -660
+    maximum: 2670
+
+  qcom,pre-emphasis-duration-bp:
+    description:
+      This signal controls the duration for which the
+      HS pre-emphasis current is sourced onto DP<#> or DM<#>.
+      The HS Transmitter pre-emphasis duration is defined in terms of
+      unit amounts. One unit of pre-emphasis duration is approximately
+      650 ps and is defined as 1X pre-emphasis duration.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: 10000
+    maximum: 20000
+
+  qcom,pre-emphasis-amplitude-bp:
+    description:
+      This signal controls the amount of current sourced to
+      DP<#> and DM<#> after a J-to-K or K-to-J transition.
+      The HS Transmitter pre-emphasis current is defined in terms of unit
+      amounts. One unit amount is approximately 2 mA and is defined as
+      1X pre-emphasis current.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: 10000
+    maximum: 40000
+
+  qcom,hs-rise-fall-time-bp:
+    description:
+      This adjusts the rise/fall times of the high-speed waveform.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -4100
+    maximum: 5430
+
+  qcom,hs-crossover-voltage-microvolt:
+    description:
+      This adjusts the voltage at which the DP<#> and DM<#>
+      signals cross while transmitting in HS mode.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -31000
+    maximum: 28000
+
+  qcom,hs-output-impedance-micro-ohms:
+    description:
+      In some applications, there can be significant series resistance
+      on the D+ and D- paths between the transceiver and cable. This adjusts
+      the driver source impedance to compensate for added series
+      resistance on the USB. The hardware accepts only discrete values. The
+      value closest to the provided input will be chosen as the override value
+      for this param.
+    minimum: -2300000
+    maximum: 6100000
+
+  qcom,ls-fs-output-impedance-bp:
+    description:
+      This adjusts the low- and full-speed single-ended source
+      impedance while driving high. The following adjustment values are based
+      on nominal process, voltage, and temperature.
+      The hardware accepts only discrete values. The value closest to the
+      provided input will be chosen as the override value for this param.
+    minimum: -1053
+    maximum: 1310
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
deleted file mode 100644
index a3bd1c4499b7..000000000000
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-* Renesas R-Car generation 2 USB PHY
-
-This file provides information on what the device node for the R-Car generation
-2 USB PHY contains.
-
-Required properties:
-- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC.
-	      "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
-	      "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
-	      "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
-	      "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
-	      "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
-	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
-	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
-	      "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or
-					  RZ/G1 compatible device.
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg: offset and length of the register block.
-- #address-cells: number of address cells for the USB channel subnodes, must
-		  be <1>.
-- #size-cells: number of size cells for the USB channel subnodes, must be <0>.
-- clocks: clock phandle and specifier pair.
-- clock-names: string, clock input name, must be "usbhs".
-
-The USB PHY device tree node should have the subnodes corresponding to the USB
-channels. These subnodes must contain the following properties:
-- reg: the USB controller selector; see the table below for the values.
-- #phy-cells: see phy-bindings.txt in the same directory, must be <1>.
-
-The phandle's argument in the PHY specifier is the USB controller selector for
-the USB channel other than r8a77470 SoC; see the selector meanings below:
-
-+-----------+---------------+---------------+
-|\ Selector |               |               |
-+ --------- +       0       |       1       |
-| Channel  \|               |               |
-+-----------+---------------+---------------+
-| 0         | PCI EHCI/OHCI | HS-USB        |
-| 2         | PCI EHCI/OHCI | xHCI          |
-+-----------+---------------+---------------+
-
-For r8a77470 SoC;see the selector meaning below:
-
-+-----------+---------------+---------------+
-|\ Selector |               |               |
-+ --------- +       0       |       1       |
-| Channel  \|               |               |
-+-----------+---------------+---------------+
-| 0         | EHCI/OHCI     | HS-USB        |
-+-----------+---------------+---------------+
-
-Example (Lager board):
-
-	usb-phy@e6590100 {
-		compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
-		reg = <0 0xe6590100 0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&cpg CPG_MOD 704>;
-		clock-names = "usbhs";
-		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-		resets = <&cpg 704>;
-
-		usb0: usb-channel@0 {
-			reg = <0>;
-			#phy-cells = <1>;
-		};
-		usb2: usb-channel@2 {
-			reg = <2>;
-			#phy-cells = <1>;
-		};
-	};
-
-Example (iWave RZ/G1C sbc):
-
-	usbphy0: usb-phy0@e6590100 {
-		compatible = "renesas,usb-phy-r8a77470",
-			     "renesas,rcar-gen2-usb-phy";
-		reg = <0 0xe6590100 0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&cpg CPG_MOD 704>;
-		clock-names = "usbhs";
-		power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-		resets = <&cpg 704>;
-
-		usb0: usb-channel@0 {
-			reg = <0>;
-			#phy-cells = <1>;
-		};
-	};
-
-	usbphy1: usb-phy@e6598100 {
-		compatible = "renesas,usb-phy-r8a77470",
-			     "renesas,rcar-gen2-usb-phy";
-		reg = <0 0xe6598100 0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&cpg CPG_MOD 706>;
-		clock-names = "usbhs";
-		power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-		resets = <&cpg 706>;
-
-		usb1: usb-channel@0 {
-			reg = <0>;
-			#phy-cells = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml
new file mode 100644
index 000000000000..afc09f39b02b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/renesas,rcar-gen2-usb-phy.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/renesas,rcar-gen2-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen2 USB PHY
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,usb-phy-r8a7742      # RZ/G1H
+          - renesas,usb-phy-r8a7743      # RZ/G1M
+          - renesas,usb-phy-r8a7744      # RZ/G1N
+          - renesas,usb-phy-r8a7745      # RZ/G1E
+          - renesas,usb-phy-r8a77470     # RZ/G1C
+          - renesas,usb-phy-r8a7790      # R-Car H2
+          - renesas,usb-phy-r8a7791      # R-Car M2-W
+          - renesas,usb-phy-r8a7794      # R-Car E2
+      - const: renesas,rcar-gen2-usb-phy # R-Car Gen2 or RZ/G1
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhs
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^usb-phy@[02]$":
+    type: object
+    description: Subnode corresponding to a USB channel.
+
+    properties:
+      reg:
+        description: FIXME RZ/G1C supports channel 0 only
+        enum: [0, 2]
+
+      '#phy-cells':
+        description: |
+          The phandle's argument in the PHY specifier is the USB controller
+          selector for the USB channel.
+          For RZ/G1C:
+            - 0 for EHCI/OHCI
+            - 1 for HS-USB
+          For all other SoCS:
+            - 0 for PCI EHCI/OHCI
+            - 1 for HS-USB (channel 0) or xHCI (channel 2)
+        const: 1
+
+    required:
+      - reg
+      - '#phy-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - usb-phy@0
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: renesas,usb-phy-r8a77470
+then:
+  properties:
+    usb-phy@2: false
+else:
+  required:
+    - usb-phy@2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    usb-phy-controller@e6590100 {
+        compatible = "renesas,usb-phy-r8a7790", "renesas,rcar-gen2-usb-phy";
+        reg = <0xe6590100 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cpg CPG_MOD 704>;
+        clock-names = "usbhs";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 704>;
+
+        usb0: usb-phy@0 {
+            reg = <0>;
+            #phy-cells = <1>;
+        };
+        usb2: usb-phy@2 {
+            reg = <2>;
+            #phy-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index 3a6e1165419c..f82649a55e91 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -32,8 +32,10 @@ properties:
 
       - items:
           - enum:
+              - renesas,usb2-phy-r9a07g043 # RZ/G2UL
               - renesas,usb2-phy-r9a07g044 # RZ/G2{L,LC}
-          - const: renesas,rzg2l-usb2-phy  # RZ/G2L family
+              - renesas,usb2-phy-r9a07g054 # RZ/V2L
+          - const: renesas,rzg2l-usb2-phy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
index b8483f9edbfc..fe57c5373d18 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -34,7 +34,7 @@ properties:
     # must not be 0.
     minItems: 2
     items:
-      - const: usb3-if # The funcional clock
+      - const: usb3-if # The functional clock
       - const: usb3s_clk # The usb3's external clock
       - const: usb_extal # The usb2's external clock
 
diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
new file mode 100644
index 000000000000..9f2d8d2cc7a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PCIe v3 phy
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-pcie3-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: refclk_m
+      - const: refclk_n
+      - const: pclk
+
+  data-lanes:
+    description: which lanes (by position) should be mapped to which
+      controller (value). 0 means lane disabled, higher value means used.
+      (controller-number +1 )
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 16
+
+  "#phy-cells":
+    const: 0
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: phy
+
+  rockchip,phy-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the phy "general register files"
+
+  rockchip,pipe-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the syscon managing the pipe "general register files"
+
+required:
+  - compatible
+  - reg
+  - rockchip,phy-grf
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    pcie30phy: phy@fe8c0000 {
+      compatible = "rockchip,rk3568-pcie3-phy";
+      reg = <0xfe8c0000 0x20000>;
+      #phy-cells = <0>;
+      clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
+               <&pmucru CLK_PCIE30PHY_REF_N>,
+               <&cru PCLK_PCIE30PHY>;
+      clock-names = "refclk_m", "refclk_n", "pclk";
+      resets = <&cru SRST_PCIE30PHY>;
+      reset-names = "phy";
+      rockchip,phy-grf = <&pcie30_phy_grf>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
index 8a3032a3bd73..5c35e5ceec0b 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -18,6 +18,7 @@ properties:
       - rockchip,px30-dsi-dphy
       - rockchip,rk3128-dsi-dphy
       - rockchip,rk3368-dsi-dphy
+      - rockchip,rk3568-dsi-dphy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
index bb4a2e4b8ab0..0e6505e9da50 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip-inno-csi-dphy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/rockchip-inno-csi-dphy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings
+title: Rockchip SoC MIPI RX0 D-PHY
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -20,6 +20,7 @@ properties:
       - rockchip,rk1808-csi-dphy
       - rockchip,rk3326-csi-dphy
       - rockchip,rk3368-csi-dphy
+      - rockchip,rk3568-csi-dphy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
index 7d888d358823..5114e99b0035 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/rockchip-mipi-dphy-rx0.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip SoC MIPI RX0 D-PHY Device Tree Bindings
+title: Rockchip SoC MIPI RX0 D-PHY
 
 maintainers:
   - Helen Koike <helen.koike@collabora.com>
diff --git a/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
new file mode 100644
index 000000000000..b03b2f00cc5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,dp-video-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC DisplayPort PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dp-video-phy
+      - samsung,exynos5420-dp-video-phy
+
+  "#phy-cells":
+    const: 0
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+required:
+  - compatible
+  - "#phy-cells"
+  - samsung,pmu-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    phy {
+        compatible = "samsung,exynos5420-dp-video-phy";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml
new file mode 100644
index 000000000000..efc679c385ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-hdmi-phy.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI PHY
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-hdmiphy
+          - samsung,exynos4212-hdmiphy
+      - const: samsung,exynos5-hdmiphy
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-phy@38 {
+            compatible = "samsung,exynos4210-hdmiphy";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
index ac0af40be52d..28e299a9609d 100644
--- a/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos-pcie-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/samsung,exynos-pcie-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung SoC series PCIe PHY Device Tree Bindings
+title: Samsung SoC series PCIe PHY
 
 maintainers:
   - Marek Szyprowski <m.szyprowski@samsung.com>
diff --git a/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml
new file mode 100644
index 000000000000..8751e559484f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,exynos5250-sata-phy.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,exynos5250-sata-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5250 SoC SATA PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5250-sata-phy
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sata_phyctrl
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  samsung,exynos-sataphy-i2c-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to I2C SATA interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,syscon-phandle
+  - samsung,exynos-sataphy-i2c-phandle
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+
+    phy@12170000 {
+        compatible = "samsung,exynos5250-sata-phy";
+        reg = <0x12170000 0x1ff>;
+        clocks = <&clock CLK_SATA_PHYCTRL>;
+        clock-names = "sata_phyctrl";
+        #phy-cells = <0>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
new file mode 100644
index 000000000000..415440aaad89
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,mipi-video-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC MIPI CSIS/DSIM DPHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  For samsung,s5pv210-mipi-video-phy compatible PHYs the second cell in the
+  PHY specifier identifies the PHY and its meaning is as follows::
+    0 - MIPI CSIS 0,
+    1 - MIPI DSIM 0,
+    2 - MIPI CSIS 1,
+    3 - MIPI DSIM 1.
+
+  samsung,exynos5420-mipi-video-phy and samsung,exynos5433-mipi-video-phy
+  support additional fifth PHY::
+    4 - MIPI CSIS 2.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-mipi-video-phy
+      - samsung,exynos5420-mipi-video-phy
+      - samsung,exynos5433-mipi-video-phy
+
+  "#phy-cells":
+    const: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface, valid only for
+      samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy.
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,cam0-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to CAM0 system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+  samsung,cam1-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to CAM1 system controller interface, valid for
+      samsung,exynos5433-mipi-video-phy.
+
+required:
+  - compatible
+  - "#phy-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-mipi-video-phy
+              - samsung,exynos5420-mipi-video-phy
+    then:
+      properties:
+        samsung,pmu-syscon: false
+        samsung,disp-sysreg: false
+        samsung,cam0-sysreg: false
+        samsung,cam1-sysreg: false
+      required:
+        - syscon
+    else:
+      properties:
+        syscon: false
+      required:
+        - samsung,pmu-syscon
+        - samsung,disp-sysreg
+        - samsung,cam0-sysreg
+        - samsung,cam1-sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    phy {
+        compatible = "samsung,exynos5433-mipi-video-phy";
+        #phy-cells = <1>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        samsung,cam0-sysreg = <&syscon_cam0>;
+        samsung,cam1-sysreg = <&syscon_cam1>;
+        samsung,disp-sysreg = <&syscon_disp>;
+    };
+
+  - |
+    phy {
+        compatible = "samsung,s5pv210-mipi-video-phy";
+        syscon = <&pmu_system_controller>;
+        #phy-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
index f6ed1a005e7a..c5dbb91ac402 100644
--- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung SoC series UFS PHY Device Tree Bindings
+title: Samsung SoC series UFS PHY
 
 maintainers:
   - Alim Akhtar <alim.akhtar@samsung.com>
@@ -17,6 +17,7 @@ properties:
     enum:
       - samsung,exynos7-ufs-phy
       - samsung,exynosautov9-ufs-phy
+      - tesla,fsd-ufs-phy
 
   reg:
     maxItems: 1
@@ -26,23 +27,25 @@ properties:
       - const: phy-pma
 
   clocks:
-    items:
-      - description: PLL reference clock
-      - description: symbol clock for input symbol ( rx0-ch0 symbol clock)
-      - description: symbol clock for input symbol ( rx1-ch1 symbol clock)
-      - description: symbol clock for output symbol ( tx0 symbol clock)
+    minItems: 1
+    maxItems: 4
 
   clock-names:
-    items:
-      - const: ref_clk
-      - const: rx1_symbol_clk
-      - const: rx0_symbol_clk
-      - const: tx0_symbol_clk
+    minItems: 1
+    maxItems: 4
 
   samsung,pmu-syscon:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
-    description: phandle for PMU system controller interface, used to
-                 control pmu registers bits for ufs m-phy
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    items:
+      minItems: 1
+      items:
+        - description: phandle for PMU system controller interface, used to
+                       control pmu registers bits for ufs m-phy
+        - description: offset of the pmu control register
+    description:
+      It can be phandle/offset pair. The second cell which can represent an
+      offset is optional.
 
 required:
   - "#phy-cells"
@@ -53,6 +56,39 @@ required:
   - clock-names
   - samsung,pmu-syscon
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-ufs-phy
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PLL reference clock
+            - description: symbol clock for input symbol (rx0-ch0 symbol clock)
+            - description: symbol clock for input symbol (rx1-ch1 symbol clock)
+            - description: symbol clock for output symbol (tx0 symbol clock)
+
+        clock-names:
+          items:
+            - const: ref_clk
+            - const: rx1_symbol_clk
+            - const: rx0_symbol_clk
+            - const: tx0_symbol_clk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: PLL reference clock
+
+        clock-names:
+          items:
+            - const: ref_clk
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml
new file mode 100644
index 000000000000..d9f22a801cbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,usb2-phy.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb2-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC USB 2.0 PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  The first phandle argument in the PHY specifier identifies the PHY, its
+  meaning is compatible dependent. For the currently supported SoCs (Exynos4210
+  and Exynos4212) it is as follows::
+    0 - USB device ("device"),
+    1 - USB host ("host"),
+    2 - HSIC0 ("hsic0"),
+    3 - HSIC1 ("hsic1"),
+  Exynos3250 has only USB device phy available as phy 0.
+
+  Exynos4210 and Exynos4212 use mode switching and require that mode switch
+  register is supplied.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-usb2-phy
+      - samsung,exynos4210-usb2-phy
+      - samsung,exynos4x12-usb2-phy
+      - samsung,exynos5250-usb2-phy
+      - samsung,exynos5420-usb2-phy
+      - samsung,s5pv210-usb2-phy
+
+  clocks:
+    items:
+      - description: PHY module gate clock.
+      - description: Reference rate clock of PHY module.
+
+  clock-names:
+    items:
+      - const: phy
+      - const: ref
+
+  "#phy-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,pmureg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to system registers interface.
+
+  vbus-supply:
+    description:
+      VBUS power source.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,pmureg-phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4x12-usb2-phy
+              - samsung,exynos5250-usb2-phy
+              - samsung,exynos5420-usb2-phy
+    then:
+      required:
+        - samsung,sysreg-phandle
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+
+    phy@12130000 {
+        compatible = "samsung,exynos5420-usb2-phy";
+        reg = <0x12130000 0x100>;
+        #phy-cells = <1>;
+        clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+        clock-names = "phy", "ref";
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,pmureg-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
new file mode 100644
index 000000000000..5ba55f9f20cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,usb3-drd-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DRD PHY USB 2.0 PHY
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  For samsung,exynos5250-usbdrd-phy and samsung,exynos5420-usbdrd-phy
+  compatible PHYs, the second cell in the PHY specifier identifies the
+  PHY id, which is interpreted as follows::
+    0 - UTMI+ type phy,
+    1 - PIPE3 type phy.
+
+  For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
+  'usbdrd_phy' nodes should have numbered alias in the aliases node, in the
+  form of usbdrdphyN, N = 0, 1... (depending on number of controllers).
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-usbdrd-phy
+      - samsung,exynos5420-usbdrd-phy
+      - samsung,exynos5433-usbdrd-phy
+      - samsung,exynos7-usbdrd-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+    description: |
+      At least two clocks::
+        - Main PHY clock (same as USB DRD controller i.e. DWC3 IP clock), used
+          for register access.
+        - PHY reference clock (usually crystal clock), used for PHY operations,
+          associated by phy name. It is used to determine bit values for clock
+          settings register.  For Exynos5420 this is given as 'sclk_usbphy30'
+          in the CMU.
+
+  "#phy-cells":
+    const: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified.
+
+  reg:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface.
+
+  vbus-supply:
+    description:
+      VBUS power source.
+
+  vbus-boost-supply:
+    description:
+      VBUS Boost 5V power source.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - "#phy-cells"
+  - reg
+  - samsung,pmu-syscon
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-usbdrd-phy
+              - samsung,exynos7-usbdrd-phy
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+            - const: phy_utmi
+            - const: phy_pipe
+            - const: itp
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: phy
+            - const: ref
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+
+    phy@12100000 {
+        compatible = "samsung,exynos5420-usbdrd-phy";
+        reg = <0x12100000 0x100>;
+        #phy-cells = <1>;
+        clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+        clock-names = "phy", "ref";
+        samsung,pmu-syscon = <&pmu_system_controller>;
+        vbus-supply = <&usb300_vbus_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
deleted file mode 100644
index 8f51aee91101..000000000000
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ /dev/null
@@ -1,210 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the listed compatibles:
-	- "samsung,s5pv210-mipi-video-phy"
-	- "samsung,exynos5420-mipi-video-phy"
-	- "samsung,exynos5433-mipi-video-phy"
-- #phy-cells : from the generic phy bindings, must be 1;
-
-In case of s5pv210 and exynos5420 compatible PHYs:
-- syscon - phandle to the PMU system controller
-
-In case of exynos5433 compatible PHY:
- - samsung,pmu-syscon - phandle to the PMU system controller
- - samsung,disp-sysreg - phandle to the DISP system registers controller
- - samsung,cam0-sysreg - phandle to the CAM0 system registers controller
- - samsung,cam1-sysreg - phandle to the CAM1 system registers controller
-
-For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
-the PHY specifier identifies the PHY and its meaning is as follows:
-  0 - MIPI CSIS 0,
-  1 - MIPI DSIM 0,
-  2 - MIPI CSIS 1,
-  3 - MIPI DSIM 1.
-"samsung,exynos5420-mipi-video-phy" and "samsung,exynos5433-mipi-video-phy"
-supports additional fifth PHY:
-  4 - MIPI CSIS 2.
-
-Samsung Exynos SoC series Display Port PHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the following supported values:
-	 - "samsung,exynos5250-dp-video-phy"
-	 - "samsung,exynos5420-dp-video-phy"
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
-		      control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 0;
-
-Samsung S5P/Exynos SoC series USB PHY
--------------------------------------------------
-
-Required properties:
-- compatible : should be one of the listed compatibles:
-	- "samsung,exynos3250-usb2-phy"
-	- "samsung,exynos4210-usb2-phy"
-	- "samsung,exynos4x12-usb2-phy"
-	- "samsung,exynos5250-usb2-phy"
-	- "samsung,exynos5420-usb2-phy"
-	- "samsung,s5pv210-usb2-phy"
-- reg : a list of registers used by phy driver
-	- first and obligatory is the location of phy modules registers
-- samsung,sysreg-phandle - handle to syscon used to control the system registers
-- samsung,pmureg-phandle - handle to syscon used to control PMU registers
-- #phy-cells : from the generic phy bindings, must be 1;
-- clocks and clock-names:
-	- the "phy" clock is required by the phy module, used as a gate
-	- the "ref" clock is used to get the rate of the clock provided to the
-	  PHY module
-
-Optional properties:
-- vbus-supply: power-supply phandle for vbus power source
-
-The first phandle argument in the PHY specifier identifies the PHY, its
-meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
-and Exynos 4212) it is as follows:
-  0 - USB device ("device"),
-  1 - USB host ("host"),
-  2 - HSIC0 ("hsic0"),
-  3 - HSIC1 ("hsic1"),
-Exynos3250 has only USB device phy available as phy 0.
-
-Exynos 4210 and Exynos 4212 use mode switching and require that mode switch
-register is supplied.
-
-Example:
-
-For Exynos 4412 (compatible with Exynos 4212):
-
-usbphy: phy@125b0000 {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	reg = <0x125b0000 0x100>;
-	clocks = <&clock 305>, <&clock 2>;
-	clock-names = "phy", "ref";
-	#phy-cells = <1>;
-	samsung,sysreg-phandle = <&sys_reg>;
-	samsung,pmureg-phandle = <&pmu_reg>;
-};
-
-Then the PHY can be used in other nodes such as:
-
-phy-consumer@12340000 {
-	phys = <&usbphy 2>;
-	phy-names = "phy";
-};
-
-Refer to DT bindings documentation of particular PHY consumer devices for more
-information about required PHYs and the way of specification.
-
-Samsung SATA PHY Controller
----------------------------
-
-SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
-Each SATA PHY controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains "samsung,exynos5250-sata-phy"
-- reg : offset and length of the SATA PHY register set;
-- #phy-cells : must be zero
-- clocks : must be exactly one entry
-- clock-names : must be "sata_phyctrl"
-- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments
-- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
-
-Example:
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock 287>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
-		samsung,syscon-phandle = <&pmu_syscon>;
-	};
-
-Device-Tree bindings for sataphy i2c client driver
---------------------------------------------------
-
-Required properties:
-compatible: Should be "samsung,exynos-sataphy-i2c"
-- reg: I2C address of the sataphy i2c device.
-
-Example:
-
-	sata_phy_i2c:sata-phy@38 {
-		compatible = "samsung,exynos-sataphy-i2c";
-		reg = <0x38>;
-	};
-
-Samsung Exynos5 SoC series USB DRD PHY controller
---------------------------------------------------
-
-Required properties:
-- compatible : Should be set to one of the following supported values:
-	- "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
-	- "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
-	- "samsung,exynos5433-usbdrd-phy" - for exynos5433 SoC.
-	- "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
-- reg : Register offset and length of USB DRD PHY register set;
-- clocks: Clock IDs array as required by the controller
-- clock-names: names of clocks correseponding to IDs in the clock property;
-	       Required clocks:
-	- phy: main PHY clock (same as USB DRD controller i.e. DWC3 IP clock),
-	       used for register access.
-	- ref: PHY's reference clock (usually crystal clock), used for
-	       PHY operations, associated by phy name. It is used to
-	       determine bit values for clock settings register.
-	       For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
-	- optional clocks: Exynos5433 & Exynos7 SoC has now following additional
-			   gate clocks available:
-			   - phy_pipe: for PIPE3 phy
-			   - phy_utmi: for UTMI+ phy
-			   - itp: for ITP generation
-- samsung,pmu-syscon: phandle for PMU system controller interface, used to
-		      control pmu registers for power isolation.
-- #phy-cells : from the generic PHY bindings, must be 1;
-
-For "samsung,exynos5250-usbdrd-phy" and "samsung,exynos5420-usbdrd-phy"
-compatible PHYs, the second cell in the PHY specifier identifies the
-PHY id, which is interpreted as follows:
-  0 - UTMI+ type phy,
-  1 - PIPE3 type phy,
-
-Example:
-	usbdrd_phy: usbphy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock 286>, <&clock 1>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-- aliases: For SoCs like Exynos5420 having multiple USB 3.0 DRD PHY controllers,
-	   'usbdrd_phy' nodes should have numbered alias in the aliases node,
-	   in the form of usbdrdphyN, N = 0, 1... (depending on number of
-	   controllers).
-Example:
-	aliases {
-		usbdrdphy0 = &usb3_phy0;
-		usbdrdphy1 = &usb3_phy1;
-	};
-
-Samsung Exynos SoC series PCIe PHY controller
---------------------------------------------------
-Required properties:
-- compatible : Should be set to "samsung,exynos5440-pcie-phy"
-- #phy-cells : Must be zero
-- reg : a register used by phy driver.
-	- First is for phy register, second is for block register.
-- reg-names : Must be set to "phy" and "block".
-
-Example:
-	pcie_phy0: pcie-phy@270000 {
-		#phy-cells = <0>;
-		compatible = "samsung,exynos5440-pcie-phy";
-		reg = <0x270000 0x1000>, <0x271000 0x40>;
-		reg-names = "phy", "block";
-	};
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
index 745c525ce6b9..a3cd45acea28 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -16,6 +16,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - socionext,uniphier-pro4-ahci-phy
       - socionext,uniphier-pxs2-ahci-phy
       - socionext,uniphier-pxs3-ahci-phy
 
@@ -26,23 +27,82 @@ properties:
     const: 0
 
   clocks:
+    minItems: 1
     maxItems: 2
 
-  clock-names:
-    oneOf:
-      - items:          # for PXs2
-          - const: link
-      - items:          # for others
-          - const: link
-          - const: phy
+  clock-names: true
 
   resets:
-    maxItems: 2
+    minItems: 2
+    maxItems: 6
+
+  reset-names: true
 
-  reset-names:
-    items:
-      - const: link
-      - const: phy
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ahci-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: gio
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: link
+            - const: gio
+            - const: phy
+            - const: pm
+            - const: tx
+            - const: rx
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pxs2-ahci-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pxs3-ahci-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
index 3e0566899041..b3ed2f74a414 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml
@@ -19,6 +19,7 @@ properties:
       - socionext,uniphier-pro5-pcie-phy
       - socionext,uniphier-ld20-pcie-phy
       - socionext,uniphier-pxs3-pcie-phy
+      - socionext,uniphier-nx1-pcie-phy
 
   reg:
     maxItems: 1
@@ -30,28 +31,51 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names:
-    oneOf:
-      - items:            # for Pro5
-          - const: gio
-          - const: link
-      - const: link       # for others
+  clock-names: true
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:            # for Pro5
-          - const: gio
-          - const: link
-      - const: link       # for others
+  reset-names: true
 
   socionext,syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: A phandle to system control to set configurations for phy
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-pcie-phy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
index 479b203f7aa6..63dab914a48d 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -43,6 +43,9 @@ patternProperties:
       "#phy-cells":
         const: 0
 
+      vbus-supply:
+        description: A phandle to the regulator for USB VBUS, only for USB host
+
     required:
       - reg
       - "#phy-cells"
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index a681cbc3b4ef..21e4414eea60 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -22,6 +22,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-hsphy
       - socionext,uniphier-ld20-usb3-hsphy
       - socionext,uniphier-pxs3-usb3-hsphy
+      - socionext,uniphier-nx1-usb3-hsphy
 
   reg:
     maxItems: 1
@@ -30,27 +31,15 @@ properties:
     const: 0
 
   clocks:
-    minItems: 1
+    minItems: 2
     maxItems: 3
 
-  clock-names:
-    oneOf:
-      - const: link          # for PXs2
-      - items:               # for PXs3 with phy-ext
-          - const: link
-          - const: phy
-          - const: phy-ext
-      - items:               # for others
-          - const: link
-          - const: phy
+  clock-names: true
 
   resets:
     maxItems: 2
 
-  reset-names:
-    items:
-      - const: link
-      - const: phy
+  reset-names: true
 
   vbus-supply:
     description: A phandle to the regulator for USB VBUS
@@ -73,6 +62,77 @@ properties:
       required for each port, if any one is omitted, the trimming data
       of the port will not be set at all.
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs2-usb3-hsphy
+              - socionext,uniphier-ld20-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs3-usb3-hsphy
+              - socionext,uniphier-nx1-usb3-hsphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: link
+            - const: phy
+            - const: phy-ext
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index 41c0dd68ee25..4c26d2d2303d 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -23,6 +23,7 @@ properties:
       - socionext,uniphier-pxs2-usb3-ssphy
       - socionext,uniphier-ld20-usb3-ssphy
       - socionext,uniphier-pxs3-usb3-ssphy
+      - socionext,uniphier-nx1-usb3-ssphy
 
   reg:
     maxItems: 1
@@ -34,33 +35,88 @@ properties:
     minItems: 2
     maxItems: 3
 
-  clock-names:
-    oneOf:
-      - items:             # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:             # for PXs3 with phy-ext
-          - const: link
-          - const: phy
-          - const: phy-ext
-      - items:             # for others
-          - const: link
-          - const: phy
+  clock-names: true
 
   resets:
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:              # for Pro4,Pro5
-          - const: gio
-          - const: link
-      - items:              # for others
-          - const: link
-          - const: phy
+  reset-names: true
 
   vbus-supply:
-    description: A phandle to the regulator for USB VBUS
+    description: A phandle to the regulator for USB VBUS, only for USB host
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-ssphy
+              - socionext,uniphier-pro5-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs2-usb3-ssphy
+              - socionext,uniphier-ld20-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: link
+            - const: phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pxs3-usb3-ssphy
+              - socionext,uniphier-nx1-usb3-ssphy
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 3
+        clock-names:
+          minItems: 2
+          items:
+            - const: link
+            - const: phy
+            - const: phy-ext
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: link
+            - const: phy
 
 required:
   - compatible
@@ -70,7 +126,6 @@ required:
   - clock-names
   - resets
   - reset-names
-  - vbus-supply
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml
new file mode 100644
index 000000000000..069d422775bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/sunplus,sp7021-usb2-phy.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/sunplus,sp7021-usb2-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SP7021 USB 2.0 PHY Controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-usb2-phy
+
+  reg:
+    items:
+      - description: UPHY register region
+      - description: MOON4 register region
+
+  reg-names:
+    items:
+      - const: phy
+      - const: moon4
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  nvmem-cell-names:
+    description: names corresponding to the nvmem cells of disconnect voltage
+    const: disc_vol
+
+  nvmem-cells:
+    description: nvmem cell address of disconnect voltage
+    maxItems: 1
+
+  sunplus,disc-vol-addr-off:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the otp address offset of disconnect voltage
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - "#phy-cells"
+  - nvmem-cell-names
+  - nvmem-cells
+  - sunplus,disc-vol-addr-off
+
+additionalProperties: false
+
+examples:
+  - |
+    sp_uphy0: usb-phy@9c004a80 {
+      compatible = "sunplus,sp7021-usb2-phy";
+      reg = <0x9c004a80 0x80>, <0x9c000248 0x10>;
+      reg-names = "phy", "moon4";
+      clocks = <&clkc 0x3d>;
+      resets = <&rstc 0x2d>;
+      #phy-cells = <0>;
+      nvmem-cell-names = "disc_vol";
+      nvmem-cells = <&disc_vol>;
+      sunplus,disc-vol-addr-off = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
index cbbf5e8b1197..8694b9eb52f9 100644
--- a/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,omap-usb2.yaml
@@ -8,7 +8,7 @@ title: OMAP USB2 PHY
 
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:
@@ -45,6 +45,10 @@ properties:
 
   syscon-phy-power:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the system control module
+          - description: register offset to power on/off the PHY
     description:
       phandle/offset pair. Phandle to the system control module and
       register offset to power on/off the PHY.
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
index ff8a6d9eb153..da7cac537e15 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
@@ -53,12 +53,25 @@ properties:
       - ti,am43xx-phy-gmii-sel
       - ti,dm814-phy-gmii-sel
       - ti,am654-phy-gmii-sel
+      - ti,j7200-cpsw5g-phy-gmii-sel
 
   reg:
     maxItems: 1
 
   '#phy-cells': true
 
+  ti,qsgmii-main-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Required only for QSGMII mode. Array to select the port for
+      QSGMII main mode. Rest of the ports are selected as QSGMII_SUB
+      ports automatically. Any one of the 4 CPSW5G ports can act as the
+      main port with the rest of them being the QSGMII_SUB ports.
+    maxItems: 1
+    items:
+      minimum: 1
+      maximum: 4
+
 allOf:
   - if:
       properties:
@@ -73,6 +86,18 @@ allOf:
         '#phy-cells':
           const: 1
           description: CPSW port number (starting from 1)
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j7200-cpsw5g-phy-gmii-sel
+    then:
+      properties:
+        ti,qsgmii-main-ports: false
+
   - if:
       properties:
         compatible:
@@ -97,7 +122,7 @@ additionalProperties: false
 
 examples:
   - |
-    phy_gmii_sel: phy-gmii-sel@650 {
+    phy_gmii_sel: phy@650 {
         compatible = "ti,am3352-phy-gmii-sel";
         reg = <0x650 0x4>;
         #phy-cells = <2>;
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index dcd63908aeae..2225925b6dad 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -16,19 +16,23 @@ properties:
       - ti,j721e-wiz-16g
       - ti,j721e-wiz-10g
       - ti,am64-wiz-10g
+      - ti,j7200-wiz-10g
 
   power-domains:
     maxItems: 1
 
   clocks:
-    maxItems: 3
+    minItems: 3
+    maxItems: 4
     description: clock-specifier to represent input to the WIZ
 
   clock-names:
+    minItems: 3
     items:
       - const: fck
       - const: core_ref_clk
       - const: ext_ref_clk
+      - const: core_ref1_clk
 
   num-lanes:
     minimum: 1
@@ -79,10 +83,12 @@ properties:
 
   refclk-dig:
     type: object
+    additionalProperties: false
     description: |
       WIZ node should have subnode for refclk_dig to select the reference
       clock source for the reference clock used in the PHY and PMA digital
       logic.
+    deprecated: true
     properties:
       clocks:
         minItems: 2
@@ -105,12 +111,19 @@ properties:
       - assigned-clocks
       - assigned-clock-parents
 
+  ti,scm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to System Control Module for syscon regmap access.
+
 patternProperties:
   "^pll[0|1]-refclk$":
     type: object
+    additionalProperties: false
     description: |
       WIZ node should have subnodes for each of the PLLs present in
       the SERDES.
+    deprecated: true
     properties:
       clocks:
         maxItems: 2
@@ -133,9 +146,11 @@ patternProperties:
 
   "^cmn-refclk1?-dig-div$":
     type: object
+    additionalProperties: false
     description:
       WIZ node should have subnodes for each of the PMA common refclock
       provided by the SERDES.
+    deprecated: true
     properties:
       clocks:
         maxItems: 1
@@ -170,6 +185,16 @@ required:
   - "#reset-cells"
   - ranges
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-wiz-10g
+    then:
+      required:
+        - ti,scm
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
index 6107880e5246..02b76f15e717 100644
--- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
@@ -37,6 +37,12 @@ properties:
       max bit rate supported in bps
     minimum: 1
 
+  mux-states:
+    description:
+      mux controller node to route the signals from controller to
+      transceiver.
+    maxItems: 1
+
 required:
   - compatible
   - '#phy-cells'
@@ -53,4 +59,5 @@ examples:
       max-bitrate = <5000000>;
       standby-gpios = <&wakeup_gpio1 16 GPIO_ACTIVE_LOW>;
       enable-gpios = <&main_gpio1 67 GPIO_ACTIVE_HIGH>;
+      mux-states = <&mux0 1>;
     };
diff --git a/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
new file mode 100644
index 000000000000..51492fe738ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common PHY and network PCS transmit amplitude property binding
+
+description:
+  Binding describing the peak-to-peak transmit amplitude for common PHYs
+  and network PCSes.
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+properties:
+  tx-p2p-microvolt:
+    description:
+      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
+      contains multiple values for various PHY modes, the
+      'tx-p2p-microvolt-names' property must be provided and contain
+      corresponding mode names.
+
+  tx-p2p-microvolt-names:
+    description: |
+      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
+      property. Required only if multiple voltages are provided.
+
+      If a value of 'default' is provided, the system should use it for any PHY
+      mode that is otherwise not defined here. If 'default' is not provided, the
+      system should use manufacturer default value.
+    minItems: 1
+    maxItems: 16
+    items:
+      enum:
+        - default
+
+        # ethernet modes
+        - sgmii
+        - qsgmii
+        - xgmii
+        - 1000base-x
+        - 2500base-x
+        - 5gbase-r
+        - rxaui
+        - xaui
+        - 10gbase-kr
+        - usxgmii
+        - 10gbase-r
+        - 25gbase-r
+
+        # PCIe modes
+        - pcie
+        - pcie1
+        - pcie2
+        - pcie3
+        - pcie4
+        - pcie5
+        - pcie6
+
+        # USB modes
+        - usb
+        - usb-ls
+        - usb-fs
+        - usb-hs
+        - usb-ss
+        - usb-ss+
+        - usb-4
+
+        # storage modes
+        - sata
+        - ufs-hs
+        - ufs-hs-a
+        - ufs-hs-b
+
+        # display modes
+        - lvds
+        - dp
+        - dp-rbr
+        - dp-hbr
+        - dp-hbr2
+        - dp-hbr3
+        - dp-uhbr-10
+        - dp-uhbr-13.5
+        - dp-uhbr-20
+
+        # camera modes
+        - mipi-dphy
+        - mipi-dphy-univ
+        - mipi-dphy-v2.5-univ
+
+dependencies:
+  tx-p2p-microvolt-names: [ tx-p2p-microvolt ]
+
+additionalProperties: true
+
+examples:
+  - |
+    phy: phy {
+      #phy-cells = <1>;
+      tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
+      tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss";
+    };
diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
index 79906519c652..cefbc8b53a83 100644
--- a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
+++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings
+title: Xilinx ZynqMP Gigabit Transceiver PHY
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
index 3f94f6944740..fb0f69ce9c16 100644
--- a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -184,6 +184,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
index cce63c3cc463..1e3c8de6cae1 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Pin Controller Device Tree Bindings
+title: Allwinner A10 Pin Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -46,6 +46,7 @@ properties:
       - allwinner,sun8i-v3s-pinctrl
       - allwinner,sun9i-a80-pinctrl
       - allwinner,sun9i-a80-r-pinctrl
+      - allwinner,sun20i-d1-pinctrl
       - allwinner,sun50i-a64-pinctrl
       - allwinner,sun50i-a64-r-pinctrl
       - allwinner,sun50i-a100-pinctrl
@@ -80,9 +81,6 @@ properties:
       - const: hosc
       - const: losc
 
-  resets:
-    maxItems: 1
-
   gpio-controller: true
   interrupt-controller: true
   gpio-line-names: true
@@ -127,26 +125,37 @@ patternProperties:
 
     additionalProperties: false
 
-  "^vcc-p[a-hlm]-supply$":
+  "^vcc-p[a-ilm]-supply$":
     description:
       Power supplies for pin banks.
 
 required:
   - "#gpio-cells"
-  - "#interrupt-cells"
   - compatible
   - reg
-  - interrupts
   - clocks
   - clock-names
   - gpio-controller
-  - interrupt-controller
 
 allOf:
   # FIXME: We should have the pin bank supplies here, but not a lot of
   # boards are defining it at the moment so it would generate a lot of
   # warnings.
 
+  - $ref: "pinctrl.yaml#"
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - allwinner,sun50i-h616-r-pinctrl
+
+    then:
+      required:
+        - "#interrupt-cells"
+        - interrupts
+        - interrupt-controller
+
   - if:
       properties:
         compatible:
@@ -174,6 +183,18 @@ allOf:
       properties:
         compatible:
           enum:
+            - allwinner,sun20i-d1-pinctrl
+
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
             - allwinner,sun9i-a80-pinctrl
 
     then:
diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
index 572923d7023e..d3b11351ca45 100644
--- a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
@@ -72,6 +72,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 100bb6dea3ec..f4f1ee6b116e 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible:     Should be one of the following:
                     "aspeed,ast2400-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
@@ -50,6 +50,9 @@ patternProperties:
                   TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
                   VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
@@ -60,6 +63,12 @@ examples:
     syscon: scu@1e6e2000 {
         compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
         reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
         pinctrl: pinctrl {
             compatible = "aspeed,ast2400-pinctrl";
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 904697bc9415..8168f0088471 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -17,7 +17,7 @@ description: |+
   			"aspeed,ast2500-scu", "syscon", "simple-mfd"
   			"aspeed,g5-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
@@ -29,6 +29,8 @@ properties:
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2
+    items:
+      maxItems: 1
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: |
       A cell of phandles to external controller nodes:
@@ -62,6 +64,9 @@ patternProperties:
                   USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
                   VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - aspeed,external-nodes
@@ -70,58 +75,29 @@ additionalProperties: false
 
 examples:
   - |
-    apb {
-        compatible = "simple-bus";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges;
-
-        syscon: scu@1e6e2000 {
-            compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
-            reg = <0x1e6e2000 0x1a8>;
-
-            pinctrl: pinctrl {
-                compatible = "aspeed,ast2500-pinctrl";
-                aspeed,external-nodes = <&gfx>, <&lhc>;
-
-                pinctrl_i2c3_default: i2c3_default {
-                    function = "I2C3";
-                    groups = "I2C3";
-                };
-
-                pinctrl_gpioh0_unbiased_default: gpioh0 {
-                    pins = "A18";
-                    bias-disable;
-                };
-            };
-        };
-
-        gfx: display@1e6e6000 {
-            compatible = "aspeed,ast2500-gfx", "syscon";
-            reg = <0x1e6e6000 0x1000>;
-        };
-    };
-
-    lpc: lpc@1e789000 {
-        compatible = "aspeed,ast2500-lpc", "simple-mfd";
-        reg = <0x1e789000 0x1000>;
+    #include <dt-bindings/clock/aspeed-clock.h>
+    scu@1e6e2000 {
+        compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
 
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x1e789000 0x1000>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
-        lpc_host: lpc-host@80 {
-            compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-            reg = <0x80 0x1e0>;
-            reg-io-width = <4>;
+        pinctrl: pinctrl {
+            compatible = "aspeed,ast2500-pinctrl";
+            aspeed,external-nodes = <&gfx>, <&lhc>;
 
-            #address-cells = <1>;
-            #size-cells = <1>;
-            ranges = <0x0 0x80 0x1e0>;
+            pinctrl_i2c3_default: i2c3_default {
+                function = "I2C3";
+                groups = "I2C3";
+            };
 
-            lhc: lhc@20 {
-                   compatible = "aspeed,ast2500-lhc";
-                   reg = <0x20 0x24>, <0x48 0x8>;
+            pinctrl_gpioh0_unbiased_default: gpioh0 {
+                pins = "A18";
+                bias-disable;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ad2866c99738..62424c42c981 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible: Should be one of the following:
                 "aspeed,ast2600-scu", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
@@ -33,7 +33,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
-                  FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+                  FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
                   GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
                   GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
                   I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
@@ -83,6 +83,9 @@ patternProperties:
                   UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
                   WDTRST3, WDTRST4]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
@@ -93,6 +96,12 @@ examples:
     syscon: scu@1e6e2000 {
         compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
         reg = <0x1e6e2000 0xf6c>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
         pinctrl: pinctrl {
             compatible = "aspeed,ast2600-pinctrl";
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index 4eaae32821ae..e047a198db38 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -85,7 +85,7 @@ Optional Properties (for I2C pins):
 - function:			String. Specifies the pin mux selection. Values
 				must be one of: "alt1", "alt2", "alt3", "alt4"
 - bias-pull-up:			Integer. Pull up strength in Ohm. There are 3
-				pull-up resisitors (1.2k, 1.8k, 2.7k) available
+				pull-up resistors (1.2k, 1.8k, 2.7k) available
 				in parallel for I2C pins, so the valid values
 				are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
 - bias-disable:			No arguments. Disable pin bias.
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
new file mode 100644
index 000000000000..8a9fb9b433ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 pin controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Binding for pin controller present on BCM4908 family SoCs.
+
+properties:
+  compatible:
+    const: brcm,bcm4908-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      function:
+        enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
+                led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
+                led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
+                led_25, led_26, led_27, led_28, led_29, led_30, led_31,
+                hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
+                usb1_pwr ]
+
+      groups:
+        minItems: 1
+        maxItems: 2
+        items:
+          enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
+                  led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
+                  led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
+                  led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
+                  led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
+                  led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
+                  led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
+                  led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
+                  led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
+                  led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
+                  nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
+                  usb1_pwr_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@ff800560 {
+        compatible = "brcm,bcm4908-pinctrl";
+        reg = <0xff800560 0x10>;
+
+        led_0-a-pins {
+            function = "led_0";
+            groups = "led_0_grp_a";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
index 08995a4f854b..ab019a1998e8 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -37,6 +37,9 @@ patternProperties:
         enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
                 gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
index 58ffed44b3c4..8c9d4668c8c4 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -41,6 +41,9 @@ patternProperties:
                 vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
                 vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
index 0fd24f40afb1..a8e22ec02215 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -36,6 +36,9 @@ patternProperties:
                 gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
                 usb_port1 ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
index 0c3ce256aa78..35867355a47a 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -34,6 +34,9 @@ patternProperties:
         enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
                 led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
index 6f68fee373bd..b584d4b27223 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -41,6 +41,9 @@ patternProperties:
                 gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
                 gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
index f4168b9f4460..229323d9237d 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -42,6 +42,9 @@ patternProperties:
                 gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
                 gpio31, uart1_grp ]
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
index fc39e3e9f71c..8d1e5b1cdd5f 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -53,6 +53,7 @@ patternProperties:
     additionalProperties: false
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - if:
       properties:
         compatible:
@@ -77,7 +78,7 @@ additionalProperties: false
 
 examples:
   - |
-    pin-controller@1800c1c0 {
+    pinctrl@1800c1c0 {
         compatible = "brcm,bcm4708-pinmux";
         reg = <0x1800c1c0 0x24>;
         reg-names = "cru_gpio_control";
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
index 46fbc73ab26b..a78cb2796001 100644
--- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 FPIOA Device Tree Bindings
+title: Canaan Kendryte K210 FPIOA
 
 maintainers:
   - Damien Le Moal <damien.lemoal@wdc.com>
@@ -39,6 +39,10 @@ properties:
 
   canaan,k210-sysctl-power:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of the K210 system controller node
+          - description: offset of its power domain control register
     description: |
       phandle of the K210 system controller node and offset of its
       power domain control register.
@@ -116,6 +120,7 @@ patternProperties:
       input-schmitt-disable: true
 
       input-polarity-invert:
+        type: boolean
         description:
           Enable or disable pin input polarity inversion.
 
@@ -128,6 +133,7 @@ patternProperties:
       output-low: true
 
       output-polarity-invert:
+        type: boolean
         description:
           Enable or disable pin output polarity inversion.
 
@@ -137,6 +143,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -151,9 +160,9 @@ examples:
     #include <dt-bindings/clock/k210-clk.h>
     #include <dt-bindings/reset/k210-rst.h>
 
-    fpioa: pinmux@502B0000 {
+    fpioa: pinmux@502b0000 {
       compatible = "canaan,k210-fpioa";
-      reg = <0x502B0000 0x100>;
+      reg = <0x502b0000 0x100>;
       clocks = <&sysclk K210_CLK_FPIOA>,
                <&sysclk K210_CLK_APB0>;
       clock-names = "ref", "pclk";
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
index a07dd197176a..5cd512b7d5ba 100644
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -51,15 +51,6 @@ properties:
       appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
     maxItems: 1
 
-  pinctrl-0:
-    description:
-      A phandle to the default pinctrl state.
-
-  pinctrl-names:
-    description:
-      A pinctrl state named "default" must be defined.
-    const: default
-
   pin-settings:
     type: object
     patternProperties:
@@ -181,6 +172,9 @@ properties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - gpio-controller
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
index 4cb174bf31ff..6bd42e43cdab 100644
--- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -30,16 +30,6 @@ description: |
     Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 properties:
-  pinctrl-0:
-    description:
-      A phandle to the node containing the subnodes containing default
-      configurations.
-
-  pinctrl-names:
-    description:
-      A pinctrl state named "default" must be defined.
-    const: default
-
   pin-settings:
     description:
       One subnode is required to contain the default settings. It
@@ -58,13 +48,12 @@ properties:
               Name of one pin group to configure.
             enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
                     pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
-                    gpio4, gpio5, gpio6, gpio7, gpio7, gpio8, gpio9,
+                    gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
                     gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
-                    gpio16, gpio17, gpio17, gpio18, gpio19, gpio20,
-                    gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
-                    gpio27, gpio27, gpio28, gpio29, gpio30, gpio31,
-                    gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
-                    gpio37, gpio38, gpio39 ]
+                    gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+                    gpio22, gpio23, gpio24, gpio25, gpio26, gpio27,
+                    gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+                    gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ]
 
           function:
             description:
diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
new file mode 100644
index 000000000000..915cbbcc3555
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8C95X0 I2C GPIO expander
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders.
+  Pin function configuration is performed on a per-pin basis.
+
+properties:
+  compatible:
+    enum:
+      - cypress,cy8c9520
+      - cypress,cy8c9540
+      - cypress,cy8c9560
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Optional power supply.
+
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: '^gp([0-7][0-7])$'
+        minItems: 1
+        maxItems: 60
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, pwm ]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      drive-open-source: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl@20 {
+        compatible = "cypress,cy8c9520";
+        reg = <0x20>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        vdd-supply = <&p3v3>;
+        gpio-reserved-ranges = <5 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
deleted file mode 100644
index bfab5ca49fd1..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Freescale i.MX7 Dual IOMUX Controller
-
-iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar
-as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low
-power state retention capabilities on gpios that are part of iomuxc-lpsr
-(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for
-mux and pad control settings, it shares the input select register from main
-iomuxc controller for daisy chain settings, the fsl,input-sel property extends
-fsl,imx-pinctrl driver to support iomuxc-lpsr controller.
-
-iomuxc_lpsr: iomuxc-lpsr@302c0000 {
-	compatible = "fsl,imx7d-iomuxc-lpsr";
-	reg = <0x302c0000 0x10000>;
-	fsl,input-sel = <&iomuxc>;
-};
-
-iomuxc: iomuxc@30330000 {
-	compatible = "fsl,imx7d-iomuxc";
-	reg = <0x30330000 0x10000>;
-};
-
-Peripherals using pads from iomuxc-lpsr support low state retention power
-state, under LPSR mode GPIO's state of pads are retain.
-
-Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
-and usage.
-
-Required properties:
-- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or
-  "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller.
-- fsl,pins: each entry consists of 6 integers and represents the mux and config
-  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
-  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
-  imx7d-pinfunc.h under device tree source folder.  The last integer CONFIG is
-  the pad setting value like pull-up on this pin.  Please refer to i.MX7 Dual
-  Reference Manual for detailed CONFIG settings.
-- fsl,input-sel: required property for iomuxc-lpsr controller, this property is
-  a phandle for main iomuxc controller which shares the input select register for
-  daisy chain settings.
-
-CONFIG bits definition:
-PAD_CTL_PUS_100K_DOWN           (0 << 5)
-PAD_CTL_PUS_5K_UP               (1 << 5)
-PAD_CTL_PUS_47K_UP              (2 << 5)
-PAD_CTL_PUS_100K_UP             (3 << 5)
-PAD_CTL_PUE                     (1 << 4)
-PAD_CTL_HYS                     (1 << 3)
-PAD_CTL_SRE_SLOW                (1 << 2)
-PAD_CTL_SRE_FAST                (0 << 2)
-PAD_CTL_DSE_X1                  (0 << 0)
-PAD_CTL_DSE_X4                  (1 << 0)
-PAD_CTL_DSE_X2                  (2 << 0)
-PAD_CTL_DSE_X6                  (3 << 0)
-
-Examples:
-While iomuxc-lpsr is intended to be used by dedicated peripherals to take
-advantages of LPSR power mode, is also possible that an IP to use pads from
-any of the iomux controllers. For example the I2C1 IP can use SCL pad from
-iomuxc-lpsr controller and SDA pad from iomuxc controller as:
-
-i2c1: i2c@30a20000 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_1>, <&pinctrl_i2c1_2>;
-};
-
-iomuxc-lpsr@302c0000 {
-	compatible = "fsl,imx7d-iomuxc-lpsr";
-	reg = <0x302c0000 0x10000>;
-	fsl,input-sel = <&iomuxc>;
-
-	pinctrl_i2c1_1: i2c1grp-1 {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
-		>;
-	};
-};
-
-iomuxc@30330000 {
-	compatible = "fsl,imx7d-iomuxc";
-	reg = <0x30330000 0x10000>;
-
-	pinctrl_i2c1_2: i2c1grp-2 {
-		fsl,pins = <
-			MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
-		>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
new file mode 100644
index 000000000000..621038662188
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX7D IOMUX Controller
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7d-iomuxc
+          - fsl,imx7d-iomuxc-lpsr
+
+  reg:
+    maxItems: 1
+
+  fsl,input-sel:
+    description:
+      phandle for main iomuxc controller which shares the input select
+      register for daisy chain settings.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer
+          CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX7D Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx7d-iomuxc-lpsr
+
+then:
+  required:
+    - fsl,input-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: pinctrl@30330000 {
+      compatible = "fsl,imx7d-iomuxc";
+      reg = <0x30330000 0x10000>;
+
+      pinctrl_uart5: uart5grp {
+        fsl,pins =
+          <0x0160 0x03D0 0x0714 0x1 0x0	0x7e>,
+          <0x0164 0x03D4 0x0000 0x1 0x0	0x76>;
+      };
+    };
+  - |
+    iomuxc_lpsr: pinctrl@302c0000 {
+      compatible = "fsl,imx7d-iomuxc-lpsr";
+      reg = <0x302c0000 0x10000>;
+      fsl,input-sel = <&iomuxc>;
+
+      pinctrl_gpio_lpsr: gpio1-grp {
+          fsl,pins =
+            <0x0008 0x0038 0x0000 0x0 0x0	0x59>,
+            <0x000C 0x003C 0x0000 0x0 0x0	0x59>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
index 6d7d162e6171..6717f163390b 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
index 7131cfd1fc45..b1cdbb56d4e4 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
index d474bc1f393b..4eed3a4e153a 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
index 0af2b6c95c17..d4a8ea5551a5 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
@@ -58,6 +58,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
index 86622c4f374b..693398d88223 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
@@ -56,6 +56,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
new file mode 100644
index 000000000000..66baa6082a4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX93 IOMUX Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+properties:
+  compatible:
+    const: fsl,imx93-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@443c0000 {
+        compatible = "fsl,imx93-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart3: uart3grp {
+            fsl,pins =
+                <0x48 0x1f8 0x41c 0x1 0x0	0x49>,
+                <0x4c 0x1fc 0x418 0x1 0x0	0x49>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
new file mode 100644
index 000000000000..1278f7293560
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMXRT1050 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@401f8000 {
+        compatible = "fsl,imxrt1050-iomuxc";
+        reg = <0x401f8000 0x4000>;
+
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x0EC 0x2DC 0x000 0x2 0x0	0xf1>,
+              <0x0F0 0x2E0 0x000 0x2 0x0	0xf1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
new file mode 100644
index 000000000000..2e880b3e537c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT1170 IOMUX Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+properties:
+  compatible:
+    const: fsl,imxrt1170-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm/boot/dts/imxrt1170-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MXRT1170 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iomuxc: iomuxc@400e8000 {
+        compatible = "fsl,imxrt1170-iomuxc";
+        reg = <0x400e8000 0x4000>;
+        pinctrl_lpuart1: lpuart1grp {
+            fsl,pins =
+              <0x16C 0x3B0 0x620 0x0 0x0  0xf1>,
+              <0x170 0x3B4 0x61C 0x0 0x0	0xf1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
new file mode 100644
index 000000000000..45ea565ce238
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the i.MX common pinctrl binding.
+  (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-iomuxc
+      - fsl,imx8qxp-iomuxc
+      - fsl,imx8dxl-iomuxc
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 3 integers and represents the pin ID, the mux value
+          and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
+          specified using a PIN_FUNC_ID macro, which can be found in
+          <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
+          the pad setting value like pull-up on this pin. Please refer to the
+          appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "pin_id" indicates the pin ID
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl {
+        compatible = "fsl,imx8qxp-iomuxc";
+
+        pinctrl_lpuart0: lpuart0grp {
+            fsl,pins = <
+                111 0 0x06000020
+                112 0 0x06000020
+            >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
index a12d0ceb7637..c2c370448b81 100644
--- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -28,9 +28,6 @@ maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 properties:
-  nodename:
-    pattern: "^pinctrl@[0-9a-f]+$"
-
   compatible:
     oneOf:
       - enum:
@@ -121,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -169,7 +169,7 @@ additionalProperties:
 
 examples:
   - |
-    pin-controller@10010000 {
+    pinctrl@10010000 {
       compatible = "ingenic,jz4770-pinctrl";
       reg = <0x10010000 0x600>;
 
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
index 2c0acb405e6c..b42548350188 100644
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -47,6 +47,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
index 5e99d79499b4..005d95a9e4d6 100644
--- a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay pin controller Device Tree Bindings
+title: Intel Keem Bay pin controller
 
 maintainers:
   - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
@@ -44,6 +44,7 @@ properties:
 patternProperties:
   '^gpio@[0-9a-f]*$':
     type: object
+    additionalProperties: false
 
     description:
       Child nodes can be specified to contain pin configuration information,
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml
new file mode 100644
index 000000000000..f001add16814
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-thunderbay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Thunder Bay pin controller
+
+maintainers:
+  - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+  Intel Thunder Bay SoC integrates a pin controller which enables control
+  of pin directions, input/output values and configuration
+  for a total of 67 pins.
+
+properties:
+  compatible:
+    const: intel,thunderbay-pinctrl
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Specifies the interrupt lines to be used by the controller.
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+patternProperties:
+  '^gpio@[0-9a-f]*$':
+    type: object
+    additionalProperties: false
+
+    description:
+      Child nodes can be specified to contain pin configuration information,
+      which can then be utilized by pinctrl client devices.
+      The following properties are supported.
+
+    properties:
+      pins:
+        description: |
+          The name(s) of the pins to be configured in the child node.
+          Supported pin names are "GPIO0" up to "GPIO66".
+
+      bias-disable: true
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      drive-strength:
+        description: Drive strength for the pad.
+        enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
+
+      bias-bus-hold:
+        type: boolean
+
+      input-schmitt-enable:
+        type: boolean
+
+      slew-rate:
+        description: GPIO slew rate control.
+                      0 - Slow
+                      1 - Fast
+        enum: [0, 1]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    // Example 1
+    pinctrl0: gpio@0 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600b0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl0 0 0 67>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    // Example 2
+    pinctrl1: gpio@1 {
+        compatible = "intel,thunderbay-pinctrl";
+        reg = <0x600c0000 0x88>;
+        gpio-controller;
+        #gpio-cells = <0x2>;
+        gpio-ranges = <&pinctrl1 0 0 53>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
new file mode 100644
index 000000000000..491f67e7cc4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell AC5 pin controller
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description:
+  Bindings for Marvell's AC5 memory-mapped pin controller.
+
+properties:
+  compatible:
+    items:
+      - const: marvell,ac5-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      marvell,function:
+        $ref: "/schemas/types.yaml#/definitions/string"
+        description:
+          Indicates the function to select.
+        enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio,
+                spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ]
+
+      marvell,pins:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        description:
+          Array of MPP pins to be used for the given function.
+        minItems: 1
+        items:
+          enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9,
+                  mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19,
+                  mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29,
+                  mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39,
+                  mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@80020100 {
+      compatible = "marvell,ac5-pinctrl";
+      reg = <0x80020100 0x20>;
+
+      i2c0_pins: i2c0-pins {
+        marvell,pins = "mpp26", "mpp27";
+        marvell,function = "i2c0";
+      };
+
+      i2c0_gpio: i2c0-gpio-pins {
+        marvell,pins = "mpp26", "mpp27";
+        marvell,function = "gpio";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
index f8e6e138dc13..33b5f79e741a 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT65xx Pin Controller Device Tree Bindings
+title: Mediatek MT65xx Pin Controller
 
 maintainers:
   - Sean Wang <sean.wang@kernel.org>
@@ -44,6 +44,8 @@ properties:
 
   mediatek,pctl-regmap:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     minItems: 1
     maxItems: 2
     description: |
@@ -64,6 +66,9 @@ required:
   - gpio-controller
   - "#gpio-cells"
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 patternProperties:
   '-[0-9]+$':
     type: object
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 152c151c27ad..8c79fcef7c52 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT6779 Pin Controller Device Tree Bindings
+title: Mediatek MT6779 Pin Controller
 
 maintainers:
   - Andy Teng <andy.teng@mediatek.com>
@@ -59,6 +59,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -73,6 +76,8 @@ required:
 patternProperties:
   '-[0-9]*$':
     type: object
+    additionalProperties: false
+
     patternProperties:
       '-pins*$':
         type: object
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
index 76a6df75ed9c..637a8386e23e 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT6797 Pin Controller Device Tree Bindings
+title: Mediatek MT6797 Pin Controller
 
 maintainers:
   - Sean Wang <sean.wang@kernel.org>
@@ -45,6 +45,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index 0feecd376c69..c9ea0cad489b 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT7622 Pin Controller Device Tree Bindings
+title: Mediatek MT7622 Pin Controller
 
 maintainers:
   - Sean Wang <sean.wang@kernel.org>
@@ -42,6 +42,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
index 7602b11e8bce..89b8f3dd67a1 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT7986 Pin Controller Device Tree Bindings
+title: Mediatek MT7986 Pin Controller
 
 maintainers:
   - Sean Wang <sean.wang@kernel.org>
@@ -56,6 +56,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -114,6 +117,10 @@ patternProperties:
           "i2s"             "audio"     62, 63, 64, 65
           "switch_int"      "eth"       66
           "mdc_mdio"        "eth"       67
+          "wf_2g"           "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83
+          "wf_5g"           "wifi"      91, 92, 93, 94, 95, 96, 97, 98, 99, 100
+          "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
+                                        84, 85
 
         $ref: "/schemas/pinctrl/pinmux-node.yaml"
         properties:
@@ -231,7 +238,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [wf_2g, wf_5g, wf_dbdc]
+                  items:
+                    enum: [wf_2g, wf_5g, wf_dbdc]
+                  maxItems: 3
       '.*conf.*':
         type: object
         additionalProperties: false
@@ -245,25 +254,27 @@ patternProperties:
               An array of strings. Each string contains the name of a pin.
               There is no PIN 41 to PIN 65 above on mt7686b, you can only use
               those pins on mt7986a.
-            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
-                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
-                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
-                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
-                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
-                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
-                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
-                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
-                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
-                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
-                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
-                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
-                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
-                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
-                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
-                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
-                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
-                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
-                   WF1_HB8]
+            items:
+              enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                     GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                     GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                     GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                     SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                     SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                     UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                     UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                     UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                     EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                     EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                     PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                     WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                     WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                     WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                     WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                     WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                     WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                     WF1_HB8]
+            maxItems: 101
 
           bias-disable: true
 
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
index cc1509e9b981..0d2484056a0f 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT8183 Pin Controller Device Tree Bindings
+title: Mediatek MT8183 Pin Controller
 
 maintainers:
   - Sean Wang <sean.wang@kernel.org>
@@ -56,6 +56,9 @@ properties:
   "#interrupt-cells":
     const: 2
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
new file mode 100644
index 000000000000..7e750f1e643d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8188 Pin Controller
+
+maintainers:
+  - Hui Liu <hui.liu@mediatek.com>
+
+description: |
+  The MediaTek's MT8188 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8188-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier, should be two. The first cell
+      is the pin number, the second cell is used to specify optional
+      parameters which are defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    items:
+      - description: gpio registers base address
+      - description: rm group io configuration registers base address
+      - description: lt group io configuration registers base address
+      - description: lm group io configuration registers base address
+      - description: rt group io configuration registers base address
+      - description: eint registers base address
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg_rm
+      - const: iocfg_lt
+      - const: iocfg_lm
+      - const: iocfg_rt
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description: |
+      We provide two methods to select the resistance for I2C when pull up or pull down.
+      The first is by RSEL definition value, another one is by resistance value(ohm).
+      This flag is used to identify if the method is resistance(si unit) value.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/mediatek,<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8188 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8188 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8188 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it doesn't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+              define in mt8188.
+              For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
+              to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+              & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8188. It can also support resistance value(ohm) "75000" & "5000" in mt8188.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8188 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8188 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8188 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+              define in mt8188.
+              For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
+              to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+              & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8188. It can also support resistance value(ohm)
+              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt8188-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11c00000 0x1000>,
+              <0x11e10000 0x1000>,
+              <0x11e20000 0x1000>,
+              <0x11ea0000 0x1000>,
+              <0x1000b000 0x1000>;
+        reg-names = "iocfg0", "iocfg_rm",
+                    "iocfg_lt", "iocfg_lm", "iocfg_rt",
+                    "eint";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 176>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        pio-pins {
+            pins {
+                pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+                output-low;
+            };
+        };
+
+        spi0-pins {
+            pins-spi {
+                pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+                         <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+                         <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
+                drive-strength = <6>;
+            };
+            pins-spi-mi {
+                pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+                bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+            };
+        };
+
+        i2c0-pins {
+            pins {
+                pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
+                         <PINMUX_GPIO56__FUNC_B1_SDA0>;
+                bias-disable;
+                drive-strength-microamp = <1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
new file mode 100644
index 000000000000..73ae6e11410b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6795 Pin Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6795-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: GPIO valid number range.
+    maxItems: 1
+
+  reg:
+    description:
+      Physical address base for gpio base and eint registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO45 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull down PUPD/R0/R1 type define value.
+            description: |
+               For normal pull down type, it is not necessary to specify R1R0
+               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+               will set different resistance values.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull up PUPD/R0/R1 type define value.
+            description: |
+               For normal pull up type, it is not necessary to specify R1R0
+               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
+               will set different resistance values.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6795-pinctrl";
+            reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+            reg-names = "base", "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 196>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+
+            i2c0-pins {
+                pins-sda-scl {
+                    pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+                             <PINMUX_GPIO46__FUNC_SCL0>;
+                };
+            };
+
+            mmc0-pins {
+                pins-cmd-dat {
+                    pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+                             <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+                             <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+                             <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+                             <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+                             <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+                             <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+                             <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+                             <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+                };
+
+                pins-clk {
+                    pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+                    bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+                };
+
+                pins-rst {
+                    pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 0aff1f28495c..8146193bd8ac 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -16,6 +16,7 @@ Required properties for the root node:
 		      "amlogic,meson-g12a-periphs-pinctrl"
 		      "amlogic,meson-g12a-aobus-pinctrl"
 		      "amlogic,meson-a1-periphs-pinctrl"
+		      "amlogic,meson-s4-periphs-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
index cb554084bdf1..0df4e114fdd6 100644
--- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -145,7 +145,7 @@ examples:
       clocks = <&sys_clk>;
       pinctrl-0 = <&sgpio2_pins>;
       pinctrl-names = "default";
-      reg = <0x1101059c 0x100>;
+      reg = <0x1101059c 0x118>;
       microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
       bus-frequency = <25000000>;
       sgpio_in2: gpio@0 {
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
deleted file mode 100644
index db99bd95d423..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Microsemi Ocelot pin controller Device Tree Bindings
-----------------------------------------------------
-
-Required properties:
- - compatible		: Should be "mscc,ocelot-pinctrl",
-			  "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
-			  "mscc,luton-pinctrl" or "mscc,serval-pinctrl"
- - reg			: Address and length of the register set for the device
- - gpio-controller	: Indicates this device is a GPIO controller
- - #gpio-cells		: Must be 2.
-			  The first cell is the pin number and the
-			  second cell specifies GPIO flags, as defined in
-			  <dt-bindings/gpio/gpio.h>.
- - gpio-ranges		: Range of pins managed by the GPIO controller.
-
-
-The ocelot-pinctrl driver uses the generic pin multiplexing and generic pin
-configuration documented in pinctrl-bindings.txt.
-
-The following generic properties are supported:
- - function
- - pins
-
-Example:
-	gpio: pinctrl@71070034 {
-		compatible = "mscc,ocelot-pinctrl";
-		reg = <0x71070034 0x28>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&gpio 0 0 22>;
-
-		uart_pins: uart-pins {
-				pins = "GPIO_6", "GPIO_7";
-				function = "uart";
-		};
-
-		uart2_pins: uart2-pins {
-				pins = "GPIO_12", "GPIO_13";
-				function = "uart2";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
new file mode 100644
index 000000000000..98d547c34ef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot pin controller
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan966x-pinctrl
+      - microchip,sparx5-pinctrl
+      - mscc,jaguar2-pinctrl
+      - mscc,luton-pinctrl
+      - mscc,ocelot-pinctrl
+      - mscc,serval-pinctrl
+      - mscc,servalt-pinctrl
+
+  reg:
+    items:
+      - description: Base address
+      - description: Extended pin configuration registers
+    minItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    description: Optional shared switch reset.
+    items:
+      - const: switch
+
+patternProperties:
+  '-pins$':
+    type: object
+    allOf:
+      - $ref: "pinmux-node.yaml"
+      - $ref: "pincfg-node.yaml"
+
+    properties:
+      function: true
+      pins: true
+      output-high: true
+      output-low: true
+      drive-strength: true
+
+    required:
+      - function
+      - pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,lan966x-pinctrl
+              - microchip,sparx5-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio: pinctrl@71070034 {
+        compatible = "mscc,ocelot-pinctrl";
+        reg = <0x71070034 0x28>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&gpio 0 0 22>;
+
+        uart_pins: uart-pins {
+            pins = "GPIO_6", "GPIO_7";
+            function = "uart";
+        };
+
+        uart2_pins: uart2-pins {
+            pins = "GPIO_12", "GPIO_13";
+            function = "uart2";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
new file mode 100644
index 000000000000..7b7f840ffc4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  # There are three kinds of subnodes:
+  # 1. a GPIO controller node for each GPIO bank
+  # 2. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+  # 3. a pinconf node configures properties of a single pin
+
+  "^gpio@[0-7]$":
+    type: object
+    additionalProperties: false
+
+    description:
+      Eight GPIO banks (gpio@0 to gpio@7), that each contain between 14 and 18
+      GPIOs. Some GPIOs support interrupts.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      interrupts:
+        maxItems: 3
+        description:
+          The interrupts associated with this GPIO bank
+
+    required:
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+  "^mux-":
+    $ref: pinmux-node.yaml#
+
+    properties:
+      groups:
+        description:
+          One or more groups of pins to mux to a certain function
+        items:
+          enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                  hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+                  clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+                  fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+                  fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                  pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+      function:
+        description:
+          The function that a group of pins is muxed to
+        enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+                dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+                gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+                fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+                pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+                hg2, hg3, hg4, hg5, hg6, hg7, gpio ]
+
+    dependencies:
+      groups: [ function ]
+      function: [ groups ]
+
+    additionalProperties: false
+
+  "^cfg-":
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          A list of pins to configure in certain ways, such as enabling
+          debouncing
+        items:
+          pattern: "^gpio1?[0-9]{1,2}$"
+
+      input-debounce: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pinctrl: pinctrl@b8003000 {
+      compatible = "nuvoton,wpcm450-pinctrl";
+      reg = <0xb8003000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio0: gpio@0 {
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+                     <3 IRQ_TYPE_LEVEL_HIGH>,
+                     <4 IRQ_TYPE_LEVEL_HIGH>;
+      };
+
+      mux-rmii2 {
+        groups = "rmii2";
+        function = "rmii2";
+      };
+
+      pinmux_uid: mux-uid {
+        groups = "gspi", "sspi";
+        function = "gpio";
+      };
+
+      pinctrl_uid: cfg-uid {
+        pins = "gpio14";
+        input-debounce = <1>;
+      };
+    };
+
+    gpio-keys {
+      compatible = "gpio-keys";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
+
+      button-uid {
+        label = "UID";
+        linux,code = <102>;
+        gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
deleted file mode 100644
index e0e886b73527..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-dpaux-padctl.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Device tree binding for NVIDIA Tegra DPAUX pad controller
-========================================================
-
-The Tegra Display Port Auxiliary (DPAUX) pad controller manages two pins
-which can be assigned to either the DPAUX channel or to an I2C
-controller.
-
-This document defines the device-specific binding for the DPAUX pad
-controller. Refer to pinctrl-bindings.txt in this directory for generic
-information about pin controller device tree bindings. Please refer to
-the binding document ../display/tegra/nvidia,tegra20-host1x.txt for more
-details on the DPAUX binding.
-
-Pin muxing:
------------
-
-Child nodes contain the pinmux configurations following the conventions
-from the pinctrl-bindings.txt document.
-
-Since only three configurations are possible, only three child nodes are
-needed to describe the pin mux'ing options for the DPAUX pads.
-Furthermore, given that the pad functions are only applicable to a
-single set of pads, the child nodes only need to describe the pad group
-the functions are being applied to rather than the individual pads.
-
-Required properties:
-- groups: Must be "dpaux-io"
-- function: Must be either "aux", "i2c" or "off".
-
-Example:
---------
-
-	dpaux@545c0000 {
-		...
-
-		state_dpaux_aux: pinmux-aux {
-			groups = "dpaux-io";
-			function = "aux";
-		};
-
-		state_dpaux_i2c: pinmux-i2c {
-			groups = "dpaux-io";
-			function = "i2c";
-		};
-
-		state_dpaux_off: pinmux-off {
-			groups = "dpaux-io";
-			function = "off";
-		};
-	};
-
-	...
-
-	i2c@7000d100 {
-		...
-		pinctrl-0 = <&state_dpaux_i2c>;
-		pinctrl-1 = <&state_dpaux_off>;
-		pinctrl-names = "default", "idle";
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
index 71ed0a9def84..f5a121311f61 100644
--- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -52,11 +52,19 @@ properties:
       hardware supporting it the pull strength in Ohm.
 
   drive-push-pull:
-    type: boolean
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 0, 1 ]
+        deprecated: true
     description: drive actively high and low
 
   drive-open-drain:
-    type: boolean
+    oneOf:
+      - type: boolean
+      - $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1    # No known cases of 0
+        deprecated: true
     description: drive with open drain
 
   drive-open-source:
@@ -114,6 +122,9 @@ properties:
     description: enable output on a pin without actively driving it
       (such as enabling an output buffer)
 
+  output-impedance-ohms:
+    description: set the output impedance of a pin to at most X ohms
+
   output-low:
     type: boolean
     description: set the pin to output mode with low level
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 9dae60acf950..6904072d3944 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -97,47 +97,8 @@ For example:
 	};
 
 == Pin controller devices ==
-Required properties: See the pin controller driver specific documentation
 
-Optional properties:
-#pinctrl-cells:	Number of pin control cells in addition to the index within the
-		pin controller device instance
-
-pinctrl-use-default: Boolean. Indicates that the OS can use the boot default
-		pin configuration. This allows using an OS that does not have a
-		driver for the pin controller. This property can be set either
-		globally for the pin controller or in child nodes for individual
-		pin group control.
-
-Pin controller devices should contain the pin configuration nodes that client
-devices reference.
-
-For example:
-
-	pincontroller {
-		... /* Standard DT properties for the device itself elided */
-
-		state_0_node_a {
-			...
-		};
-		state_1_node_a {
-			...
-		};
-		state_1_node_b {
-			...
-		};
-	}
-
-The contents of each of those pin configuration child nodes is defined
-entirely by the binding for the individual pin controller device. There
-exists no common standard for this content. The pinctrl framework only
-provides generic helper bindings that the pin controller driver can use.
-
-The pin configuration nodes need not be direct children of the pin controller
-device; they may be grandchildren, for example. Whether this is legal, and
-whether there is any interaction between the child and intermediate parent
-nodes, is again defined entirely by the binding for the individual pin
-controller device.
+See pinctrl.yaml
 
 == Generic pin multiplexing node content ==
 
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
new file mode 100644
index 000000000000..26573a793b57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 Pin Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8186-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  reg:
+    description: |
+      Physical address base for gpio base registers. There are 8 different GPIO
+      physical address base in mt8186.
+    maxItems: 8
+
+  reg-names:
+    description: |
+      Gpio base register names.
+    items:
+      - const: iocfg0
+      - const: iocfg_lt
+      - const: iocfg_lm
+      - const: iocfg_lb
+      - const: iocfg_bl
+      - const: iocfg_rb
+      - const: iocfg_rt
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq
+    maxItems: 1
+
+  mediatek,rsel-resistance-in-si-unit:
+    type: boolean
+    description: |
+      Identifying i2c pins pull up/down type which is RSEL. It can support
+      RSEL define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO128 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8186 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203]
+                description: mt8186 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8186 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8186.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              define in mt8186. It can also support resistance value(ohm)
+              "75000" & "5000" in mt8186.
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8186 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203]
+                description: mt8186 pull up RSEL type define value.
+              - enum: [1000, 5000, 10000, 75000]
+                description: mt8186 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8186.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              define in mt8186. It can also support resistance value(ohm)
+              "1000" & "5000" & "10000" & "75000" in mt8186.
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8186-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x10002000 0x0200>,
+            <0x10002200 0x0200>,
+            <0x10002400 0x0200>,
+            <0x10002600 0x0200>,
+            <0x10002A00 0x0200>,
+            <0x10002c00 0x0200>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+                  "iocfg_lb", "iocfg_bl", "iocfg_rb",
+                  "iocfg_rt", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 185>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
+                   <PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
+                   <PINMUX_GPIO2__FUNC_SPI0_MO_B>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
+          bias-pull-down;
+        };
+      };
+
+      i2c0-pins {
+        pins {
+          pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
+                   <PINMUX_GPIO128__FUNC_SDA0>;
+          bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+          drive-strength-microamp = <1000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
index c4c071211611..e0e943e5b874 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8192.yaml
@@ -29,6 +29,8 @@ properties:
     description: gpio valid number range.
     maxItems: 1
 
+  gpio-line-names: true
+
   reg:
     description: |
       Physical address base for gpio base registers. There are 11 GPIO
@@ -51,62 +53,79 @@ properties:
 
 #PIN CONFIGURATION NODES
 patternProperties:
-  '^pins':
+  '-pins$':
     type: object
-    description: |
-      A pinctrl node should contain at least one subnodes representing the
-      pinctrl groups available on the machine. Each subnode will list the
-      pins it needs, and how they should be configured, with regard to muxer
-      configuration, pullups, drive strength, input enable/disable and
-      input schmitt.
-      An example of using macro:
-      pincontroller {
-        /* GPIO0 set as multifunction GPIO0 */
-        state_0_node_a {
-          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-        };
-        /* GPIO1 set as multifunction PWM */
-        state_0_node_b {
-          pinmux = <PINMUX_GPIO1__FUNC_PWM_1>;
-        };
-      };
-    $ref: "pinmux-node.yaml"
-
-    properties:
-      pinmux:
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
         description: |
-          Integer array, represents gpio pin number and mux setting.
-          Supported pin number and mux varies for different SoCs, and are defined
-          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+        $ref: "pinmux-node.yaml"
 
-      drive-strength:
-        description: |
-          It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
-          dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are defined
+              as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
 
-      bias-pull-down: true
+          drive-strength:
+            description: |
+              It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
+              dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
 
-      bias-pull-up: true
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
 
-      bias-disable: true
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+                description: normal pull down.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull down type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
 
-      output-high: true
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+                description: normal pull up.
+              - enum: [100, 101, 102, 103]
+                description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
+              - enum: [200, 201, 202, 203]
+                description: RSEL pull up type. See MTK_PULL_SET_RSEL_
+                  defines in dt-bindings/pinctrl/mt65xx.h.
 
-      output-low: true
+          bias-disable: true
 
-      input-enable: true
+          output-high: true
 
-      input-disable: true
+          output-low: true
 
-      input-schmitt-enable: true
+          input-enable: true
 
-      input-schmitt-disable: true
+          input-disable: true
 
-    required:
-      - pinmux
+          input-schmitt-enable: true
 
-    additionalProperties: false
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+        additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
 
 required:
   - compatible
@@ -148,8 +167,17 @@ examples:
                     interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
                     #interrupt-cells = <2>;
 
-                    pins {
-                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-                      output-low;
+                    spi1-default-pins {
+                            pins-cs-mosi-clk {
+                                    pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+                                             <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+                                             <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+                                    bias-disable;
+                            };
+
+                            pins-miso {
+                                    pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+                                    bias-pull-down;
+                            };
                     };
             };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 5e2bb2bf3a55..66fe17e9e4d3 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -29,6 +29,8 @@ properties:
     description: gpio valid number range.
     maxItems: 1
 
+  gpio-line-names: true
+
   reg:
     description: |
       Physical address base for gpio base registers. There are 8 GPIO
@@ -49,143 +51,173 @@ properties:
     description: The interrupt outputs to sysirq.
     maxItems: 1
 
-  mediatek,rsel_resistance_in_si_unit:
+  mediatek,rsel-resistance-in-si-unit:
     type: boolean
     description: |
       Identifying i2c pins pull up/down type which is RSEL. It can support
       RSEL define or si unit value(ohm) to set different resistance.
 
-#PIN CONFIGURATION NODES
+# PIN CONFIGURATION NODES
 patternProperties:
   '-pins$':
     type: object
-    description: |
-      A pinctrl node should contain at least one subnodes representing the
-      pinctrl groups available on the machine. Each subnode will list the
-      pins it needs, and how they should be configured, with regard to muxer
-      configuration, pullups, drive strength, input enable/disable and
-      input schmitt.
-      An example of using macro:
-      pincontroller {
-        /* GPIO0 set as multifunction GPIO0 */
-        gpio_pin {
-          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-        };
-        /* GPIO8 set as multifunction SDA0 */
-        i2c0_pin {
-          pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-        };
-      };
-    $ref: "pinmux-node.yaml"
-
-    properties:
-      pinmux:
-        description: |
-          Integer array, represents gpio pin number and mux setting.
-          Supported pin number and mux varies for different SoCs, and are defined
-          as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-
-      bias-pull-down:
-        description: |
-          For pull down type is normal, it don't need add RSEL & R1R0 define
-          and resistance value.
-          For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
-          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
-          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
-          define in mt8195.
-          For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
-          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
-          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
-          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
-          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
-          define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
-          oneOf:
-            - enum: [100, 101, 102, 103]
-            - description: mt8195 pull down PUPD/R0/R1 type define value.
-            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
-            - description: mt8195 pull down RSEL type define value.
-            - enum: [75000, 5000]
-            - description: mt8195 pull down RSEL type si unit value(ohm).
-
-          An example of using RSEL define:
-          pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
-            };
-          };
-          An example of using si unit resistance value(ohm):
-          &pio {
-            mediatek,rsel_resistance_in_si_unit;
-          }
-          pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-down = <75000>;
-            };
-          };
-
-      bias-pull-up:
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
         description: |
-          For pull up type is normal, it don't need add RSEL & R1R0 define
-          and resistance value.
-          For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
-          set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
-          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
-          define in mt8195.
-          For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
-          to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
-          It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
-          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
-          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
-          define in mt8195. It can also support resistance value(ohm)
-          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
-          oneOf:
-            - enum: [100, 101, 102, 103]
-            - description: mt8195 pull up PUPD/R0/R1 type define value.
-            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
-            - description: mt8195 pull up RSEL type define value.
-            - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
-            - description: mt8195 pull up RSEL type si unit value(ohm).
-          An example of using RSEL define:
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
           pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
             };
-          };
-          An example of using si unit resistance value(ohm):
-          &pio {
-            mediatek,rsel_resistance_in_si_unit;
-          }
-          pincontroller {
-            i2c0_pin {
-              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
-              bias-pull-up = <1000>;
+            /* GPIO8 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+              }
             };
           };
-
-      bias-disable: true
-
-      output-high: true
-
-      output-low: true
-
-      input-enable: true
-
-      input-disable: true
-
-      input-schmitt-enable: true
-
-      input-schmitt-disable: true
-
-    required:
-      - pinmux
-
-    additionalProperties: false
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          drive-strength-microamp:
+            enum: [125, 250, 500, 1000]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull down PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull down RSEL type define value.
+              - enum: [75000, 5000]
+                description: mt8195 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull down type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "75000" & "5000" in mt8195.
+
+              An example of using RSEL define:
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0_pin {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-down = <75000>;
+                  }
+                };
+              };
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8195 pull up PUPD/R0/R1 type define value.
+              - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+                description: mt8195 pull up RSEL type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+                description: mt8195 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add RSEL & R1R0 define
+              and resistance value.
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8195.
+              For pull up type is RSEL, it can add RSEL define & resistance
+              value(ohm) to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+              It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+              & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+              & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+              & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+              define in mt8195. It can also support resistance value(ohm)
+              "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" &
+              "75000" in mt8195.
+              An example of using RSEL define:
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+                  }
+                };
+              };
+              An example of using si unit resistance value(ohm):
+              &pio {
+                mediatek,rsel-resistance-in-si-unit;
+              }
+              pincontroller {
+                i2c0-pins {
+                  pins {
+                    pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+                    bias-pull-up = <1000>;
+                  }
+                };
+              };
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: "pinctrl.yaml#"
 
 required:
   - compatible
@@ -201,30 +233,55 @@ additionalProperties: false
 
 examples:
   - |
-            #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-            #include <dt-bindings/interrupt-controller/arm-gic.h>
-            pio: pinctrl@10005000 {
-                    compatible = "mediatek,mt8195-pinctrl";
-                    reg = <0x10005000 0x1000>,
-                          <0x11d10000 0x1000>,
-                          <0x11d30000 0x1000>,
-                          <0x11d40000 0x1000>,
-                          <0x11e20000 0x1000>,
-                          <0x11eb0000 0x1000>,
-                          <0x11f40000 0x1000>,
-                          <0x1000b000 0x1000>;
-                    reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
-                          "iocfg_br", "iocfg_lm", "iocfg_rb",
-                          "iocfg_tl", "eint";
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    gpio-ranges = <&pio 0 0 144>;
-                    interrupt-controller;
-                    interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
-                    #interrupt-cells = <2>;
-
-                    pio-pins {
-                      pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
-                      output-low;
-                    };
-            };
+    #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #
+    pio: pinctrl@10005000 {
+      compatible = "mediatek,mt8195-pinctrl";
+      reg = <0x10005000 0x1000>,
+            <0x11d10000 0x1000>,
+            <0x11d30000 0x1000>,
+            <0x11d40000 0x1000>,
+            <0x11e20000 0x1000>,
+            <0x11eb0000 0x1000>,
+            <0x11f40000 0x1000>,
+            <0x1000b000 0x1000>;
+      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+                  "iocfg_br", "iocfg_lm", "iocfg_rb",
+                  "iocfg_tl", "eint";
+      gpio-controller;
+      #gpio-cells = <2>;
+      gpio-ranges = <&pio 0 0 144>;
+      interrupt-controller;
+      interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+      #interrupt-cells = <2>;
+
+      pio-pins {
+        pins {
+          pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+          output-low;
+        };
+      };
+
+      spi0-pins {
+        pins-spi {
+          pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+                   <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+                   <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+          bias-disable;
+        };
+        pins-spi-mi {
+          pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+          bias-pull-down;
+        };
+      };
+
+      i2c0-pins {
+        pins {
+          pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+                   <PINMUX_GPIO9__FUNC_SCL0>;
+          bias-disable;
+          drive-strength-microamp = <1000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
index cbcbd31e3ce8..939cb5b6ffea 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -27,7 +27,7 @@ Required properties:
 - pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
 
 First 2 properties must be added in the RK805 PMIC node, documented in
-Documentation/devicetree/bindings/mfd/rk808.txt
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
 
 Optional properties:
 -------------------
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
new file mode 100644
index 000000000000..d471563119a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Pin controller devices should contain the pin configuration nodes that client
+  devices reference.
+
+  The contents of each of those pin configuration child nodes is defined
+  entirely by the binding for the individual pin controller device. There
+  exists no common standard for this content. The pinctrl framework only
+  provides generic helper bindings that the pin controller driver can use.
+
+  The pin configuration nodes need not be direct children of the pin controller
+  device; they may be grandchildren, for example. Whether this is legal, and
+  whether there is any interaction between the child and intermediate parent
+  nodes, is again defined entirely by the binding for the individual pin
+  controller device.
+
+properties:
+  $nodename:
+    pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+  "#pinctrl-cells":
+    description: >
+      Number of pin control cells in addition to the index within the pin
+      controller device instance.
+
+  pinctrl-use-default:
+    type: boolean
+    description: >
+      Indicates that the OS can use the boot default pin configuration. This
+      allows using an OS that does not have a driver for the pin controller.
+      This property can be set either globally for the pin controller or in
+      child nodes for individual pin group control.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
index c64c93206817..931e5c190ead 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -141,7 +144,7 @@ examples:
               #interrupt-cells = <2>;
               gpio-controller;
               #gpio-cells = <2>;
-              gpio-ranges = <&tlmm 0 80>;
+              gpio-ranges = <&tlmm 0 0 80>;
 
               serial3-pinmux {
                       pins = "gpio44", "gpio45";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
index 3b02dc6626ed..f7bd4be1739e 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   MDM9607 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
index 040d2ada3669..ab4a2b4cfda2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -97,6 +97,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
new file mode 100644
index 000000000000..e03530091478
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8909 TLMM block
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the MSM8909 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8909-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-msm8909-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-msm8909-tlmm-state"
+
+$defs:
+  qcom-msm8909-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-7])$"
+            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+                      sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1,
+                      qdsd_data2, qdsd_data3 ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+                atest_char1, atest_char2, atest_char3, atest_combodac,
+                atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1,
+                bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1,
+                blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1,
+                blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1,
+                blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+                blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk,
+                cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0,
+                dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd,
+                ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio,
+                gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync,
+                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2,
+                pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a,
+                pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+                pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b,
+                prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a,
+                qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s,
+                smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present,
+                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+                uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
+                wcss_bt, wcss_fm, wcss_wlan ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        pinctrl@1000000 {
+                compatible = "qcom,msm8909-tlmm";
+                reg = <0x1000000 0x300000>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+
+                gpio-wo-subnode-state {
+                        pins = "gpio1";
+                        function = "gpio";
+                };
+
+                uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio4";
+                                function = "blsp_uart1";
+                                bias-pull-up;
+                        };
+
+                        tx {
+                                pins = "gpio5";
+                                function = "blsp_uart1";
+                                bias-disable;
+                        };
+                };
+        };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
index abe9f4c9b1e3..d4da558cde54 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -34,6 +34,8 @@ properties:
 
   gpio-controller: true
 
+  gpio-reserved-ranges: true
+
   '#gpio-cells':
     description: Specifying the pin number and flags, as defined in
       include/dt-bindings/gpio/gpio.h
@@ -133,6 +135,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 8952b4cc1262..29dd503f9522 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -17,22 +17,29 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,pm2250-gpio
           - qcom,pm660-gpio
           - qcom,pm660l-gpio
+          - qcom,pm6125-gpio
           - qcom,pm6150-gpio
           - qcom,pm6150l-gpio
           - qcom,pm6350-gpio
+          - qcom,pm7250b-gpio
           - qcom,pm7325-gpio
           - qcom,pm8005-gpio
           - qcom,pm8008-gpio
           - qcom,pm8018-gpio
+          - qcom,pm8019-gpio
           - qcom,pm8038-gpio
           - qcom,pm8058-gpio
           - qcom,pm8150-gpio
           - qcom,pm8150b-gpio
+          - qcom,pm8150l-gpio
+          - qcom,pm8226-gpio
           - qcom,pm8350-gpio
           - qcom,pm8350b-gpio
           - qcom,pm8350c-gpio
+          - qcom,pm8450-gpio
           - qcom,pm8916-gpio
           - qcom,pm8917-gpio
           - qcom,pm8921-gpio
@@ -45,10 +52,13 @@ properties:
           - qcom,pmi8994-gpio
           - qcom,pmi8998-gpio
           - qcom,pmk8350-gpio
+          - qcom,pmm8155au-gpio
+          - qcom,pmp8074-gpio
           - qcom,pmr735a-gpio
           - qcom,pmr735b-gpio
           - qcom,pms405-gpio
           - qcom,pmx55-gpio
+          - qcom,pmx65-gpio
 
       - enum:
           - qcom,spmi-gpio
@@ -67,6 +77,16 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  gpio-line-names:
+    minItems: 2
+    maxItems: 44
+
+  gpio-reserved-ranges:
+    minItems: 1
+    # maxItems as half of total number of GPIOs, as there has to be at
+    # least one usable GPIO between each reserved range.
+    maxItems: 22
+
   '#gpio-cells':
     const: 2
     description:
@@ -83,13 +103,281 @@ required:
   - gpio-ranges
   - interrupt-controller
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8008-gpio
+              - qcom,pmi8950-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 2
+          maxItems: 2
+        gpio-reserved-ranges:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8005-gpio
+              - qcom,pm8450-gpio
+              - qcom,pm8916-gpio
+              - qcom,pmk8350-gpio
+              - qcom,pmr735a-gpio
+              - qcom,pmr735b-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 4
+          maxItems: 4
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8018-gpio
+              - qcom,pm8019-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 6
+          maxItems: 6
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8226-gpio
+              - qcom,pm8350b-gpio
+              - qcom,pm8950-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 8
+          maxItems: 8
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6350-gpio
+              - qcom,pm8350c-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 9
+          maxItems: 9
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm2250-gpio
+              - qcom,pm6150-gpio
+              - qcom,pm7325-gpio
+              - qcom,pm8150-gpio
+              - qcom,pm8350-gpio
+              - qcom,pmc8180-gpio
+              - qcom,pmi8994-gpio
+              - qcom,pmm8155au-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 10
+          maxItems: 10
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmx55-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 11
+          maxItems: 11
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-gpio
+              - qcom,pm6150l-gpio
+              - qcom,pm7250b-gpio
+              - qcom,pm8038-gpio
+              - qcom,pm8150b-gpio
+              - qcom,pm8150l-gpio
+              - qcom,pmc8180c-gpio
+              - qcom,pmp8074-gpio
+              - qcom,pms405-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 12
+          maxItems: 12
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 13
+          maxItems: 13
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi8998-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 14
+          maxItems: 14
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmx65-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 16
+          maxItems: 16
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8994-gpio
+              - qcom,pma8084-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 22
+          maxItems: 22
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 11
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 26
+          maxItems: 26
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 13
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 36
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 18
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8917-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 38
+          maxItems: 38
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 19
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8058-gpio
+              - qcom,pm8921-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 44
+          maxItems: 44
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 22
+
 patternProperties:
   '-state$':
     oneOf:
       - $ref: "#/$defs/qcom-pmic-gpio-state"
       - patternProperties:
-          ".*":
+          "(pinconf|-pins)$":
             $ref: "#/$defs/qcom-pmic-gpio-state"
+        additionalProperties: false
 
 $defs:
   qcom-pmic-gpio-state:
@@ -102,9 +390,11 @@ $defs:
         description:
           List of gpio pins affected by the properties specified in
           this subnode.  Valid pins are
+                 - gpio1-gpio9 for pm6125
                  - gpio1-gpio10 for pm6150
                  - gpio1-gpio12 for pm6150l
                  - gpio1-gpio9 for pm6350
+                 - gpio1-gpio12 for pm7250b
                  - gpio1-gpio10 for pm7325
                  - gpio1-gpio4 for pm8005
                  - gpio1-gpio2 for pm8008
@@ -120,6 +410,7 @@ $defs:
                  - gpio1-gpio10 for pm8350
                  - gpio1-gpio8 for pm8350b
                  - gpio1-gpio9 for pm8350c
+                 - gpio1-gpio4 for pm8450
                  - gpio1-gpio38 for pm8917
                  - gpio1-gpio44 for pm8921
                  - gpio1-gpio36 for pm8941
@@ -130,12 +421,15 @@ $defs:
                  - gpio1-gpio2 for pmi8950
                  - gpio1-gpio10 for pmi8994
                  - gpio1-gpio4 for pmk8350
+                 - gpio1-gpio10 for pmm8155au
+                 - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12)
                  - gpio1-gpio4 for pmr735a
                  - gpio1-gpio4 for pmr735b
                  - gpio1-gpio12 for pms405 (holes on gpio1, gpio9
                                             and gpio10)
                  - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
                                             and gpio11)
+                 - gpio1-gpio16 for pmx65
 
         items:
           pattern: "^gpio([0-9]+)$"
@@ -170,6 +464,7 @@ $defs:
 
       bias-high-impedance: true
       input-enable: true
+      input-disable: true
       output-high: true
       output-low: true
       output-enable: true
@@ -228,7 +523,7 @@ examples:
       #gpio-cells = <2>;
 
       pm8921_gpio_keys: gpio-keys-state {
-        volume-keys {
+        volume-keys-pins {
           pins = "gpio20", "gpio21";
           function = "normal";
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 35c846f59979..df79274d0ec3 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -21,6 +21,7 @@ properties:
           - qcom,pm8019-mpp
           - qcom,pm8038-mpp
           - qcom,pm8058-mpp
+          - qcom,pm8226-mpp
           - qcom,pm8821-mpp
           - qcom,pm8841-mpp
           - qcom,pm8916-mpp
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
index 13f338619d77..3f4f1c0360b5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml
@@ -42,8 +42,7 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
@@ -118,6 +117,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..624e14f00790
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sc7280-lpass-lpi-pinctrl
+
+  qcom,adsp-bypass-mode:
+    description:
+      Tells ADSP is in bypass mode.
+    type: boolean
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9])$"
+        minItems: 1
+        maxItems: 15
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    lpass_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 15>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
index 7d6a2ab10eec..ad3496784678 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. SC7280 TLMM block
 
 maintainers:
-  - Rajendra Nayak <rnayak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description: |
   This binding describes the Top Level Mode Multiplexer block found in the
@@ -42,8 +42,10 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  gpio-line-names:
+    maxItems: 174
+
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
@@ -52,7 +54,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
 
     properties:
       pins:
@@ -61,7 +62,7 @@ patternProperties:
           subnode.
         items:
           oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-4])$"
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
             - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
                       sdc2_cmd, sdc2_data, ufs_reset ]
         minItems: 1
@@ -119,10 +120,22 @@ patternProperties:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
 required:
   - compatible
   - reg
@@ -137,22 +150,22 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@f000000 {
-                compatible = "qcom,sc7280-pinctrl";
-                reg = <0xf000000 0x1000000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 175>;
-                wakeup-parent = <&pdc>;
-
-                qup_uart5_default: qup-uart5-pins {
-                        pins = "gpio46", "gpio47";
-                        function = "qup13";
-                        drive-strength = <2>;
-                        bias-disable;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f000000 {
+        compatible = "qcom,sc7280-pinctrl";
+        reg = <0xf000000 0x1000000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 175>;
+        wakeup-parent = <&pdc>;
+
+        qup_uart5_default: qup-uart5-pins {
+            pins = "gpio46", "gpio47";
+            function = "qup13";
+            drive-strength = <2>;
+            bias-disable;
         };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
index a82dab898395..b98eeba2c530 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   SC8180X platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -50,8 +51,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+        additionalProperties: false
 
 '$defs':
   qcom-sc8180x-tlmm-state:
@@ -59,7 +61,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -110,43 +111,52 @@ patternProperties:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@3100000 {
-                compatible = "qcom,sc8180x-tlmm";
-                reg = <0x03100000 0x300000>,
-                      <0x03500000 0x700000>,
-                      <0x03d00000 0x300000>;
-                reg-names = "west", "east", "south";
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 190>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx {
-                                pins = "gpio4";
-                                function = "qup6";
-                                bias-pull-up;
-                        };
-
-                        tx {
-                                pins = "gpio5";
-                                function = "qup6";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@3100000 {
+        compatible = "qcom,sc8180x-tlmm";
+        reg = <0x03100000 0x300000>,
+              <0x03500000 0x700000>,
+              <0x03d00000 0x300000>;
+        reg-names = "west", "east", "south";
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 190>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup6";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup6";
+                bias-disable;
+            };
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..1f468303bb08
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI pins SLEW registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-1]|1[0-8]])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s3_clk, i2s3_ws, i2s3_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    pinctrl@33c0000 {
+        compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 18>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
new file mode 100644
index 000000000000..b9ab130cd558
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8280XP TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SC8280XP platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+        additionalProperties: false
+
+'$defs':
+  qcom-sc8280xp-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset, ufs1_reset ]
+        minItems: 1
+        maxItems: 16
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async, cci_i2c,
+                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+                cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
+                cmu_rng, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5,
+                ddr_pxi6, ddr_pxi7, dp2_hot, dp3_hot, edp0_lcd, edp1_lcd,
+                edp2_lcd, edp3_lcd, edp_hot, emac0_dll, emac0_mcg0, emac0_mcg1,
+                emac0_mcg2, emac0_mcg3, emac0_phy, emac0_ptp, emac1_dll0,
+                emac1_dll1, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3,
+                emac1_phy, emac1_ptp, gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4,
+                gcc_gp5, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, ibi_i3c,
+                jitter_bist, lpass_slimbus, mdp0_vsync0, mdp0_vsync1,
+                mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5,
+                mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0,
+                mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
+                mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
+                mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s1_data0,
+                mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, mi2s2_data1,
+                mi2s2_sck, mi2s2_ws, mi2s_mclk1, mi2s_mclk2, pcie2a_clkreq,
+                pcie2b_clkreq, pcie3a_clkreq, pcie3b_clkreq, pcie4_clkreq,
+                phase_flag, pll_bist, pll_clk, prng_rosc0, prng_rosc1,
+                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qspi, qspi_clk,
+                qspi_cs, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+                qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+                qup18, qup19, qup20, qup21, qup22, qup23, rgmii_0, rgmii_1,
+                sd_write, sdc40, sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig,
+                tgu, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4,
+                usb0_dp, usb0_phy, usb0_sbrx, usb0_sbtx, usb0_usb4, usb1_dp,
+                usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
+                vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sc8280xp-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 230>;
+
+        gpio-wo-subnode-state {
+                pins = "gpio1";
+                function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio4";
+                function = "qup14";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio5";
+                function = "qup14";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index 112dd59ce7ed..a38090b14aab 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -118,6 +118,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
new file mode 100644
index 000000000000..cdfcf29dffee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description:
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX65 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sdx65-tlmm-state"
+'$defs':
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+        minItems: 1
+        maxItems: 150
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+                gpio ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,sdx65-tlmm";
+        reg = <0x03000000 0xdc2000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 109>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx {
+                pins = "gpio4";
+                function = "blsp_uart1";
+                bias-pull-up;
+            };
+
+            tx {
+                pins = "gpio5";
+                function = "blsp_uart1";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index 8fc06f6a3ef4..e39fbb36d8c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -49,8 +49,9 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  gpio-reserved-ranges: true
+
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
@@ -58,8 +59,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6115-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6115-tlmm-state"
+        additionalProperties: false
 
 '$defs':
   qcom-sm6115-tlmm-state:
@@ -67,7 +69,6 @@ patternProperties:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -119,8 +120,21 @@ patternProperties:
     required:
       - pins
 
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+        then:
+          required:
+            - function
+
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -136,44 +150,44 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@500000 {
-                compatible = "qcom,sm6115-tlmm";
-                reg = <0x500000 0x400000>,
-                        <0x900000 0x400000>,
-                        <0xd00000 0x400000>;
-                reg-names = "west", "south", "east";
-                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 114>;
-
-                sdc2_on_state: sdc2-on-state {
-                        clk {
-                                pins = "sdc2_clk";
-                                bias-disable;
-                                drive-strength = <16>;
-                        };
-
-                        cmd {
-                                pins = "sdc2_cmd";
-                                bias-pull-up;
-                                drive-strength = <10>;
-                        };
-
-                        data {
-                                pins = "sdc2_data";
-                                bias-pull-up;
-                                drive-strength = <10>;
-                        };
-
-                        sd-cd {
-                                pins = "gpio88";
-                                function = "gpio";
-                                bias-pull-up;
-                                drive-strength = <2>;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,sm6115-tlmm";
+        reg = <0x500000 0x400000>,
+              <0x900000 0x400000>,
+              <0xd00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 114>;
+
+        sdc2_on_state: sdc2-on-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                bias-disable;
+                drive-strength = <16>;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                bias-pull-up;
+                drive-strength = <10>;
+            };
+
+            sd-cd-pins {
+                pins = "gpio88";
+                function = "gpio";
+                bias-pull-up;
+                drive-strength = <2>;
+            };
         };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
index 5f7adaa81f83..5cb8b272cb7d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml
@@ -13,6 +13,7 @@ description: |
   in the SM6125 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -50,8 +51,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6125-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6125-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm6125-tlmm-state:
@@ -59,7 +61,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -110,23 +111,52 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@500000 {
-                compatible = "qcom,sm6125-tlmm";
-                reg = <0x00500000 0x400000>,
-                    <0x00900000 0x400000>,
-                    <0x00d00000 0x400000>;
-                reg-names = "west", "south", "east";
-                interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                gpio-ranges = <&tlmm 0 0 134>;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6125-tlmm";
+        reg = <0x00500000 0x400000>,
+              <0x00900000 0x400000>,
+              <0x00d00000 0x400000>;
+        reg-names = "west", "south", "east";
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        gpio-ranges = <&tlmm 0 0 134>;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        sdc2-off-state {
+            clk-pins {
+                pins = "sdc2_clk";
+                drive-strength = <2>;
+                bias-disable;
+            };
+
+            cmd-pins {
+                pins = "sdc2_cmd";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
+
+            data-pins {
+                pins = "sdc2_data";
+                drive-strength = <2>;
+                bias-pull-up;
+            };
         };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
index 554992a681f3..856b9c567ecb 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   in the SM6350 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -43,8 +44,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm6350-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm6350-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm6350-tlmm-state:
@@ -52,7 +54,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -109,40 +110,49 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm6350-tlmm";
-                reg = <0x0f100000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 157>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx {
-                                pins = "gpio25";
-                                function = "qup13_f2";
-                                bias-disable;
-                        };
-
-                        tx {
-                                pins = "gpio26";
-                                function = "qup13_f2";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm6350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio25";
+                function = "qup13_f2";
+                bias-disable;
+            };
+
+            tx-pins {
+                pins = "gpio26";
+                function = "qup13_f2";
+                bias-disable;
+            };
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
new file mode 100644
index 000000000000..025faf87d147
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6375 TLMM block
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM6375 platform.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+  gpio-reserved-ranges: true
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm6375-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm6375-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm6375-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+                      sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+                atest_char2, atest_char3, atest_tsens, atest_tsens2,
+                atest_usb1, atest_usb10, atest_usb11, atest_usb12,
+                atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
+                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
+                gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+                gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
+                m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+                mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
+                nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
+                phase_flag11, phase_flag12, phase_flag13, phase_flag14,
+                phase_flag15, phase_flag16, phase_flag17, phase_flag18,
+                phase_flag19, phase_flag2, phase_flag20, phase_flag21,
+                phase_flag22, phase_flag23, phase_flag24, phase_flag25,
+                phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+                phase_flag3, phase_flag30, phase_flag31, phase_flag4,
+                phase_flag5, phase_flag6, phase_flag7, phase_flag8,
+                phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+                qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
+                qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+                qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+                qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+                qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
+                qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
+                sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+                tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
+                usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+                wlan2_adc0, wlan2_adc1 ]
+
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@500000 {
+        compatible = "qcom,sm6375-tlmm";
+        reg = <0x00500000 0x800000>;
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 157>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup13_f2";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup13_f2";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index e47ebf934daf..06efb1382876 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
@@ -103,6 +103,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index 8508c57522fd..c44d02d28bc9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -49,8 +49,7 @@ properties:
   gpio-ranges:
     maxItems: 1
 
-  wakeup-parent:
-    maxItems: 1
+  wakeup-parent: true
 
 #PIN CONFIGURATION NODES
 patternProperties:
@@ -111,10 +110,22 @@ patternProperties:
 
       required:
         - pins
-        - function
+
+      allOf:
+        - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+        - if:
+            properties:
+              pins:
+                pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+          then:
+            required:
+              - function
 
       additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -130,18 +141,18 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@1f00000 {
-                compatible = "qcom,sm8250-pinctrl";
-                reg = <0x0f100000 0x300000>,
-                      <0x0f500000 0x300000>,
-                      <0x0f900000 0x300000>;
-                reg-names = "west", "south", "north";
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 180>;
-                wakeup-parent = <&pdc>;
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@1f00000 {
+            compatible = "qcom,sm8250-pinctrl";
+            reg = <0x0f100000 0x300000>,
+                  <0x0f500000 0x300000>,
+                  <0x0f900000 0x300000>;
+            reg-names = "west", "south", "north";
+            interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-ranges = <&tlmm 0 0 180>;
+            wakeup-parent = <&pdc>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
index 4f2667ea2805..6ae5571f60da 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml
@@ -14,6 +14,7 @@ description: |
   in the SM8350 platform.
 
 allOf:
+  - $ref: "pinctrl.yaml#"
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
@@ -43,8 +44,9 @@ patternProperties:
     oneOf:
       - $ref: "#/$defs/qcom-sm8350-tlmm-state"
       - patternProperties:
-          ".*":
+          "-pins$":
             $ref: "#/$defs/qcom-sm8350-tlmm-state"
+        additionalProperties: false
 
 $defs:
   qcom-sm8350-tlmm-state:
@@ -52,7 +54,6 @@ $defs:
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
 
     properties:
       pins:
@@ -106,40 +107,49 @@ $defs:
 
     required:
       - pins
-      - function
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
+        then:
+          required:
+            - function
 
     additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm8350-tlmm";
-                reg = <0x0f100000 0x300000>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 203>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                        rx {
-                                pins = "gpio18";
-                                function = "qup3";
-                                bias-pull-up;
-                        };
-
-                        tx {
-                                pins = "gpio19";
-                                function = "qup3";
-                                bias-disable;
-                        };
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8350-tlmm";
+        reg = <0x0f100000 0x300000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 203>;
+
+        gpio-wo-subnode-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-subnodes-state {
+            rx-pins {
+                pins = "gpio18";
+                function = "qup3";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio19";
+                function = "qup3";
+                bias-disable;
+            };
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
new file mode 100644
index 000000000000..3694795ec793
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sm8450-lpass-lpi-pinctrl
+
+  reg:
+    items:
+      - description: LPASS LPI TLMM Control and Status registers
+      - description: LPASS LPI pins SLEW registers
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: "^gpio([0-9]|[1-2][0-9]])$"
+
+      function:
+        enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+                dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+                dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+                qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+                i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+                wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
+                slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
+                ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
+                ext_mclk1_e ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+          0: No adjustments
+          1: Higher Slew rate (faster edges)
+          2: Lower Slew rate (slower edges)
+          3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    pinctrl@3440000 {
+        compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+        reg = <0x3440000 0x20000>,
+              <0x34d0000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 23>;
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
new file mode 100644
index 000000000000..9cd97a467648
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer (TLMM) block found
+  in the SM8450 platform.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+  interrupt-controller: true
+  '#interrupt-cells': true
+  gpio-controller: true
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 105
+
+  gpio-line-names:
+    maxItems: 209
+
+  '#gpio-cells': true
+  gpio-ranges: true
+  wakeup-parent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sm8450-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sm8450-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+                cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+                cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+                ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+                gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+                mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+                mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+                mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+                mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+                mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+                pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+                prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+                qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+                qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+                qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+                qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+                qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+                qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+                sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+                tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+                tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+                uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+                usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+
+    allOf:
+      - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+      - if:
+          properties:
+            pins:
+              pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+        then:
+          required:
+            - function
+
+    additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup7";
+                bias-disable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
index 3b37cf102d41..c88c8dcb69d9 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -42,7 +42,6 @@ properties:
     description:
       Specifying the interrupt-controller used to wake up the system when the
       TLMM block has been powered down.
-    maxItems: 1
 
   gpio-reserved-ranges:
     description:
@@ -51,6 +50,9 @@ properties:
       should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
       information.
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - interrupts
   - interrupt-controller
@@ -70,7 +72,6 @@ $defs:
     properties:
       drive-strength:
         enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
         description:
           Selects the drive strength for the specified pins, in mA.
 
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
new file mode 100644
index 000000000000..6f17f3991640
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7620-pinctrl.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7620 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7620-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [
+              # common
+              i2c, spi, wdt,
+
+              # For MT7620 SoC
+              ephy, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi refclk,
+              uartf, uartlite, wled,
+
+              # For MT7628 and MT7688 SoCs
+              gpio, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+              p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn, perst, pwm0,
+              pwm1, refclk, sdmode, spi cs1, spis, uart0, uart1, uart2,
+              wled_an, wled_kn,
+            ]
+
+          function:
+            description: The mux function to select.
+            enum: [
+              # common
+              gpio, i2c, refclk, spi,
+
+              # For MT7620 SoC
+              ephy, gpio i2s, gpio uartf, i2s uartf, mdio, nand, pa,
+              pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+              rgmii1, rgmii2, sd, spi refclk, uartf, uartlite, wdt refclk,
+              wdt rst, wled,
+
+              # For MT7628 and MT7688 SoCs
+              antenna, debug, i2s, jtag, p0led_an, p0led_kn,
+              p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
+              p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, pwm_uart2,
+              rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7, spi cs1,
+              spis, sw_r, uart0, uart1, uart2, utif, wdt, wled_an, wled_kn, -,
+            ]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,mt7620-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
new file mode 100644
index 000000000000..61e5c847e8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,mt7621-pinctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink MT7621 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink MT7621 pin controller for MT7621 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,mt7621-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi, uart1,
+                   uart2, uart3, wdt]
+
+          function:
+            description: The mux function to select.
+            enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
+                   pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi,
+                   uart1, uart2, uart3, wdt refclk, wdt rst]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,mt7621-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
index b32f2676cab5..56e5becabcfd 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -1,21 +1,23 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinmux.yaml#
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ralink rt2880 pinmux controller
+title: Ralink RT2880 Pin Controller
 
 maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
 
 description:
-  The rt2880 pinmux can only set the muxing of pin groups. muxing indiviual pins
-  is not supported. There is no pinconf support.
+  Ralink RT2880 pin controller for RT2880 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
 
 properties:
   compatible:
-    const: ralink,rt2880-pinmux
+    const: ralink,rt2880-pinctrl
 
 patternProperties:
   '-pins$':
@@ -28,13 +30,12 @@ patternProperties:
 
         properties:
           groups:
-            description: Name of the pin group to use for the functions.
-            enum: [i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2, mdio,
-                   pcie, sdhci]
+            description: The pin group to select.
+            enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
           function:
-            description: The mux function to select
-            enum: [gpio, i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2,
-                   mdio, nand1, nand2, sdhci]
+            description: The mux function to select.
+            enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
 
         required:
           - groups
@@ -44,6 +45,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
@@ -53,7 +57,7 @@ examples:
   # Pinmux controller node
   - |
     pinctrl {
-      compatible = "ralink,rt2880-pinmux";
+      compatible = "ralink,rt2880-pinctrl";
 
       i2c_pins: i2c0-pins {
         pinmux {
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 000000000000..f602a5d6e13a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350
+  SoCs.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt305x-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [
+              # common
+              i2c, jtag, led, mdio, rgmii, spi, spi_cs1, uartf, uartlite,
+
+              # For RT3050, RT3052 and RT3350 SoCs
+              sdram,
+
+              # For RT3352 SoC
+              lna, pa
+            ]
+
+          function:
+            description: The mux function to select.
+            enum: [
+              # common
+              gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, mdio,
+              pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1, uartf,
+              uartlite, wdg_cs1,
+
+              # For RT3050, RT3052 and RT3350 SoCs
+              sdram,
+
+              # For RT3352 SoC
+              lna, pa
+            ]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,rt305x-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 000000000000..feb6e66dcb61
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description:
+  Ralink RT3883 pin controller for RT3883 SoC.
+  The pin controller can only set the muxing of pin groups. Muxing individual
+  pins is not supported. There is no pinconf support.
+
+properties:
+  compatible:
+    const: ralink,rt3883-pinctrl
+
+patternProperties:
+  '-pins$':
+    type: object
+    patternProperties:
+      '^(.*-)?pinmux$':
+        type: object
+        description: node for pinctrl.
+        $ref: pinmux-node.yaml#
+
+        properties:
+          groups:
+            description: The pin group to select.
+            enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi, uartf,
+                   uartlite]
+
+          function:
+            description: The mux function to select.
+            enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag,
+                   lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2,
+                   pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+        required:
+          - groups
+          - function
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    pinctrl {
+      compatible = "ralink,rt3883-pinctrl";
+
+      i2c_pins: i2c0-pins {
+        pinmux {
+          groups = "i2c";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
index ac4e068aa03f..4fc758fea7e6 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -44,6 +44,8 @@ properties:
       - renesas,pfc-r8a77990    # R-Car E3
       - renesas,pfc-r8a77995    # R-Car D3
       - renesas,pfc-r8a779a0    # R-Car V3U
+      - renesas,pfc-r8a779f0    # R-Car S4-8
+      - renesas,pfc-r8a779g0    # R-Car V4H
       - renesas,pfc-sh73a0      # SH-Mobile AG5
 
   reg:
@@ -70,6 +72,9 @@ properties:
   power-domains:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
index 7f80578dc229..9083040c996a 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -31,6 +31,9 @@ properties:
   reg:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -38,6 +41,7 @@ required:
 patternProperties:
   "^gpio-[0-9]*$":
     type: object
+    additionalProperties: false
 
     description:
       Each port of the r7s72100 pin controller hardware is itself a GPIO
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
index ce1f7343788f..d761fddc2206 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -72,6 +72,9 @@ patternProperties:
 
       additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index ef68dabcf4dc..f081acb7ba04 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -4,15 +4,15 @@
 $id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L combined Pin and GPIO controller
+title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
   - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
 
 description:
-  The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO
-  controller.
+  The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and
+  GPIO controller.
   Pin multiplexing and GPIO configuration is performed on a per-pin basis.
   Each port features up to 8 pins, each of them configurable for GPIO function
   (port mode) or in alternate function mode.
@@ -20,8 +20,16 @@ description:
 
 properties:
   compatible:
-    enum:
-      - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
+              - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+
+      - items:
+          - enum:
+              - renesas,r9a07g054-pinctrl     # RZ/V2L
+          - const: renesas,r9a07g044-pinctrl  # RZ/G2{L,LC} fallback for RZ/V2L
 
   reg:
     maxItems: 1
@@ -39,6 +47,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+      second cell is used to specify the flag.
+      E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+      being used as an interrupt.
+
   clocks:
     maxItems: 1
 
@@ -73,7 +92,10 @@ additionalProperties:
         pins: true
         drive-strength:
           enum: [ 2, 4, 8, 12 ]
+        output-impedance-ohms:
+          enum: [ 33, 50, 66, 100 ]
         power-source:
+          description: I/O voltage in millivolt.
           enum: [ 1800, 2500, 3300 ]
         slew-rate: true
         gpio-hog: true
@@ -90,12 +112,17 @@ additionalProperties:
       additionalProperties:
         $ref: "#/additionalProperties/anyOf/0"
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
   - gpio-controller
   - '#gpio-cells'
   - gpio-ranges
+  - interrupt-controller
+  - '#interrupt-cells'
   - clocks
   - power-domains
   - resets
@@ -112,6 +139,8 @@ examples:
             gpio-controller;
             #gpio-cells = <2>;
             gpio-ranges = <&pinctrl 0 0 392>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
             clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
             resets = <&cpg R9A07G044_GPIO_RSTN>,
                      <&cpg R9A07G044_GPIO_PORT_RESETN>,
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
index 4a43af0d6e02..70b1788ab594 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -31,6 +31,9 @@ properties:
     description:
       The bus clock, sometimes described as pclk, for register accesses.
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
new file mode 100644
index 000000000000..eac6245db7dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M combined Pin and GPIO controller
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+  - Phil Edworthy <phil.edworthy@renesas.com>
+
+description:
+  The Renesas RZ/V2M SoC features a combined Pin and GPIO controller.
+  Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+  Each port features up to 16 pins, each of them configurable for GPIO function
+  (port mode) or in alternate function mode.
+  Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+  compatible:
+    const: renesas,r9a09g011-pinctrl # RZ/V2M
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the
+      second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+      E.g. "RZV2M_GPIO(8, 1)" for P8_1.
+
+  gpio-ranges:
+    maxItems: 1
+
+  interrupts:
+    description: INEXINT[0..38] corresponding to individual pin inputs.
+    maxItems: 39
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: pincfg-node.yaml#
+        - $ref: pinmux-node.yaml#
+
+      description:
+        Pin controller client devices use pin configuration subnodes (children
+        and grandchildren) for desired pin configuration.
+        Client device subnodes use below standard properties.
+
+      properties:
+        phandle: true
+        pinmux:
+          description:
+            Values are constructed from GPIO port number, pin number, and
+            alternate function configuration number using the RZV2M_PORT_PINMUX()
+            helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>.
+        pins: true
+        bias-disable: true
+        bias-pull-down: true
+        bias-pull-up: true
+        drive-strength-microamp:
+          # Superset of supported values
+          enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000,
+                  9000, 9600, 11000, 12000, 13000, 18000 ]
+        slew-rate:
+          description: 0 is slow slew rate, 1 is fast slew rate
+          enum: [ 0, 1 ]
+        gpio-hog: true
+        gpios: true
+        output-high: true
+        output-low: true
+        line-name: true
+
+    - type: object
+      properties:
+        phandle: true
+
+      additionalProperties:
+        $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl: pinctrl@b6250000 {
+            compatible = "renesas,r9a09g011-pinctrl";
+            reg = <0xb6250000 0x800>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pinctrl 0 0 352>;
+            interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+            resets = <&cpg R9A09G011_PFC_PRESETN>;
+            power-domains = <&cpg>;
+
+            i2c2_pins: i2c2 {
+                    pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+                             <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+            };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 07c0a98ef9c6..b486f41df65f 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -33,6 +33,7 @@ properties:
     enum:
       - rockchip,px30-pinctrl
       - rockchip,rk2928-pinctrl
+      - rockchip,rk3036-pinctrl
       - rockchip,rk3066a-pinctrl
       - rockchip,rk3066b-pinctrl
       - rockchip,rk3128-pinctrl
@@ -44,7 +45,9 @@ properties:
       - rockchip,rk3368-pinctrl
       - rockchip,rk3399-pinctrl
       - rockchip,rk3568-pinctrl
+      - rockchip,rk3588-pinctrl
       - rockchip,rv1108-pinctrl
+      - rockchip,rv1126-pinctrl
 
   rockchip,grf:
     $ref: "/schemas/types.yaml#/definitions/phandle"
@@ -67,6 +70,9 @@ properties:
 
   ranges: true
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - rockchip,grf
@@ -126,7 +132,7 @@ additionalProperties:
               description:
                 Pin bank index.
             - minimum: 0
-              maximum: 6
+              maximum: 10
               description:
                 Mux 0 means GPIO and mux 1 to N means
                 the specific device function.
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
new file mode 100644
index 000000000000..8cf3c47ab86b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#interrupt-cells':
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+    const: 2
+
+  interrupt-controller:
+    description:
+      For GPIO banks supporting external GPIO interrupts or external wake-up
+      interrupts.
+
+  interrupts:
+    description:
+      For GPIO banks supporting direct external wake-up interrupts (without
+      multiplexing).  Number of interrupts must match number of wake-up capable
+      pins of this bank.
+    minItems: 1
+    maxItems: 8
+
+required:
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
new file mode 100644
index 000000000000..f796f27bf0e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
+
+  The values used for config properties should be derived from the hardware
+  manual and these values are programmed as-is into the pin pull up/down and
+  driver strength register of the pin-controller.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  samsung,pins:
+    description: |
+      List of pins to configure. For initial and sleep states, the maximum
+      number is one pin. In other cases there is no upper limit.
+
+      The pins should use lowercase names matching hardware manual, e.g. for
+      GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  samsung,pin-function:
+    description: |
+      The pin function selection that should be applied on the pins listed in the
+      child node is specified using the "samsung,pin-function" property. The value
+      of this property that should be applied to each of the pins listed in the
+      "samsung,pins" property should be picked from the hardware manual of the SoC
+      for the specified pin group. This property is optional in the child node if
+      no specific function selection is desired for the pins listed in the child
+      node. The value of this property is used as-is to program the pin-controller
+      function selector register of the pin-bank.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-drv:
+    description: Drive strength configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+  samsung,pin-pud:
+    description: Pull up/down configuration.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-val:
+    description: Initial value of pin output buffer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  samsung,pin-con-pdn:
+    description: Function in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  samsung,pin-pud-pdn:
+    description: Pull up/down configuration in power down mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - samsung,pins
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
new file mode 100644
index 000000000000..1de91a51234d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
+  For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt
+  controllers, only one pin-controller device node can include external wake-up
+  interrupts child node (in other words, only one External wake-up interrupts
+  pin-controller is supported).
+  For newer controllers, multiple pin-controller device node can include
+  external wake-up interrupts child node.
+
+  See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-wakeup-eint
+      - samsung,s3c2412-wakeup-eint
+      - samsung,s3c64xx-wakeup-eint
+      - samsung,s5pv210-wakeup-eint
+      - samsung,exynos4210-wakeup-eint
+      - samsung,exynos7-wakeup-eint
+      - samsung,exynos850-wakeup-eint
+      - samsung,exynosautov9-wakeup-eint
+
+  interrupts:
+    description:
+      Interrupt used by multiplexed external wake-up interrupts.
+    minItems: 1
+    maxItems: 6
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-wakeup-eint
+              - samsung,s3c2412-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s3c64xx-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-wakeup-eint
+              - samsung,exynos4210-wakeup-eint
+              - samsung,exynos7-wakeup-eint
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 1
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wakeup-eint
+              - samsung,exynosautov9-wakeup-eint
+    then:
+      properties:
+        interrupts: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
new file mode 100644
index 000000000000..eb2b2692607d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -0,0 +1,387 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+  controller.
+
+  All the pin controller nodes should be represented in the aliases node using
+  the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+  The controller supports three types of interrupts::
+   - External GPIO interrupts (see interrupts property in pin controller node);
+
+   - External wake-up interrupts - multiplexed (capable of waking up the system
+     see interrupts property in external wake-up interrupt controller node -
+     samsung,pinctrl-wakeup-interrupt.yaml);
+
+   - External wake-up interrupts - direct (capable of waking up the system, see
+     interrupts property in every bank of pin controller with external wake-up
+     interrupt controller - samsung,pinctrl-gpio-bank.yaml).
+
+properties:
+  $nodename:
+    pattern: "^pinctrl(@.*)?"
+
+  compatible:
+    enum:
+      - samsung,s3c2412-pinctrl
+      - samsung,s3c2416-pinctrl
+      - samsung,s3c2440-pinctrl
+      - samsung,s3c2450-pinctrl
+      - samsung,s3c64xx-pinctrl
+      - samsung,s5pv210-pinctrl
+      - samsung,exynos3250-pinctrl
+      - samsung,exynos4210-pinctrl
+      - samsung,exynos4x12-pinctrl
+      - samsung,exynos5250-pinctrl
+      - samsung,exynos5260-pinctrl
+      - samsung,exynos5410-pinctrl
+      - samsung,exynos5420-pinctrl
+      - samsung,exynos5433-pinctrl
+      - samsung,exynos7-pinctrl
+      - samsung,exynos7885-pinctrl
+      - samsung,exynos850-pinctrl
+      - samsung,exynosautov9-pinctrl
+      - tesla,fsd-pinctrl
+
+  interrupts:
+    description:
+      Required for GPIO banks supporting external GPIO interrupts.
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    description:
+      Second base address of the pin controller if the specific registers of
+      the pin controller are separated into the different base address.
+      Only certain banks of certain pin controller might need it.
+    minItems: 1
+    maxItems: 2
+
+  wakeup-interrupt-controller:
+    $ref: samsung,pinctrl-wakeup-interrupt.yaml
+
+patternProperties:
+  "^[a-z]+[0-9]*-gpio-bank$":
+    description:
+      Pin banks of the controller are represented by child nodes of the
+      controller node. Bank name is taken from name of the node.
+    $ref: samsung,pinctrl-gpio-bank.yaml
+
+  "^[a-z0-9-]+-pins$":
+    oneOf:
+      - $ref: samsung,pinctrl-pins-cfg.yaml
+        required:
+          - samsung,pins
+      - type: object
+        patternProperties:
+          "^[a-z0-9-]+-pins$":
+            $ref: samsung,pinctrl-pins-cfg.yaml
+
+        additionalProperties: false
+
+  "^(initial|sleep)-state$":
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
+        $ref: samsung,pinctrl-pins-cfg.yaml
+
+        properties:
+          samsung,pins:
+            description: See samsung,pinctrl-pins-cfg.yaml
+            $ref: /schemas/types.yaml#/definitions/string-array
+            maxItems: 1
+
+        required:
+          - samsung,pins
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-pinctrl
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    pinctrl@7f008000 {
+        compatible = "samsung,s3c64xx-pinctrl";
+        reg = <0x7f008000 0x1000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <21>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,s3c64xx-wakeup-eint";
+            interrupts-extended = <&vic0 0>,
+                                  <&vic0 1>,
+                                  <&vic1 0>,
+                                  <&vic1 1>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa-0", "gpa-1";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+        };
+
+        // ...
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@11400000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11400000 0x1000>;
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&sleep0>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        uart0-data-pins {
+            samsung,pins = "gpa0-0", "gpa0-1";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+        };
+
+        // ...
+
+        sleep0: sleep-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-con-pdn = <2>;
+                samsung,pin-pud-pdn = <0>;
+            };
+
+            gpa0-1-pin {
+                samsung,pins = "gpa0-1";
+                samsung,pin-con-pdn = <0>;
+                samsung,pin-pud-pdn = <0>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@11000000 {
+        compatible = "samsung,exynos4210-pinctrl";
+        reg = <0x11000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos4210-wakeup-eint";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpj0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        /* Pin bank without external interrupts */
+        gpy0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpx0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        sd0-clk-pins {
+            samsung,pins = "gpk0-0";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <3>;
+        };
+
+        sd4-bus-width8-pins {
+            part-1-pins {
+                samsung,pins = "gpk0-3", "gpk0-4",
+                               "gpk0-5", "gpk0-6";
+                samsung,pin-function = <3>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <3>;
+            };
+
+            part-2-pins {
+                samsung,pins = "gpk1-3", "gpk1-4",
+                               "gpk1-5", "gpk1-6";
+                samsung,pin-function = <4>;
+                samsung,pin-pud = <3>;
+                samsung,pin-drv = <3>;
+            };
+        };
+
+        // ...
+
+        otg-gp-pins {
+            samsung,pins = "gpx3-3";
+            samsung,pin-function = <1>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+            samsung,pin-val = <0>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@10580000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&initial_alive>;
+
+        wakeup-interrupt-controller {
+            compatible = "samsung,exynos7-wakeup-eint";
+            interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        /* Pin bank with external direct wake-up interrupts */
+        gpa0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            interrupt-controller;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        te-irq-pins {
+            samsung,pins = "gpf1-3";
+            samsung,pin-function = <0xf>;
+        };
+
+        // ..
+
+        initial_alive: initial-state {
+            gpa0-0-pin {
+                samsung,pins = "gpa0-0";
+                samsung,pin-function = <0>;
+                samsung,pin-pud = <1>;
+                samsung,pin-drv = <0>;
+            };
+
+            // ...
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pinctrl@114b0000 {
+        compatible = "samsung,exynos5433-pinctrl";
+        reg = <0x114b0000 0x1000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_aud>;
+
+        /* Pin bank with external GPIO or muxed external wake-up interrupts */
+        gpz0-gpio-bank {
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        // ...
+
+        i2s0-bus-pins {
+            samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+                           "gpz0-4", "gpz0-5", "gpz0-6";
+            samsung,pin-function = <2>;
+            samsung,pin-pud = <0>;
+            samsung,pin-drv = <0>;
+        };
+
+        // ...
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
deleted file mode 100644
index b8b475967ff9..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ /dev/null
@@ -1,382 +0,0 @@
-Samsung GPIO and Pin Mux/Config controller
-
-Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
-controller. It controls the input/output settings on the available pads/pins
-and also provides ability to multiplex and configure the output of various
-on-chip controllers onto these pads.
-
-Required Properties:
-- compatible: should be one of the following.
-  - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
-  - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
-  - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
-  - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
-  - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
-  - "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
-  - "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
-  - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
-  - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
-  - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
-  - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
-  - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
-  - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
-  - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
-  - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
-  - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
-  - "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
-
-- reg: Base address of the pin controller hardware module and length of
-  the address space it occupies.
-
-  - reg: Second base address of the pin controller if the specific registers
-  of the pin controller are separated into the different base address.
-
-	Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
-	- First base address is for GPAx and GPF[1-5] external interrupt
-	  registers.
-	- Second base address is for GPF[1-5] pinctrl registers.
-
-	pinctrl_0: pinctrl@10580000 {
-		compatible = "samsung,exynos5433-pinctrl";
-		reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos7-wakeup-eint";
-			interrupts = <0 16 0>;
-		};
-	};
-
-- Pin banks as child nodes: Pin banks of the controller are represented by child
-  nodes of the controller node. Bank name is taken from name of the node. Each
-  bank node must contain following properties:
-
-  - gpio-controller: identifies the node as a gpio controller and pin bank.
-  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-    binding is used, the amount of cells must be specified as 2. See the below
-    mentioned gpio binding representation for description of particular cells.
-
-	Eg: <&gpx2 6 0>
-	<[phandle of the gpio controller node]
-	[pin number within the gpio controller]
-	[flags]>
-
-	Values for gpio specifier:
-	- Pin number: is a value between 0 to 7.
-	- Flags: 0 - Active High
-		 1 - Active Low
-
-- Pin mux/config groups as child nodes: The pin mux (selecting pin function
-  mode) and pin config (pull up/down, driver strength) settings are represented
-  as child nodes of the pin-controller node. There should be at least one
-  child node and there is no limit on the count of these child nodes. It is
-  also possible for a child node to consist of several further child nodes
-  to allow grouping multiple pinctrl groups into one. The format of second
-  level child nodes is exactly the same as for first level ones and is
-  described below.
-
-  The child node should contain a list of pin(s) on which a particular pin
-  function selection or pin configuration (or both) have to applied. This
-  list of pins is specified using the property name "samsung,pins". There
-  should be at least one pin specified for this property and there is no upper
-  limit on the count of pins that can be specified. The pins are specified
-  using pin names which are derived from the hardware manual of the SoC. As
-  an example, the pins in GPA0 bank of the pin controller can be represented
-  as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
-  The format of the pin names should be (as per the hardware manual)
-  "[pin bank name]-[pin number within the bank]".
-
-  The pin function selection that should be applied on the pins listed in the
-  child node is specified using the "samsung,pin-function" property. The value
-  of this property that should be applied to each of the pins listed in the
-  "samsung,pins" property should be picked from the hardware manual of the SoC
-  for the specified pin group. This property is optional in the child node if
-  no specific function selection is desired for the pins listed in the child
-  node. The value of this property is used as-is to program the pin-controller
-  function selector register of the pin-bank.
-
-  The child node can also optionally specify one or more of the pin
-  configuration that should be applied on all the pins listed in the
-  "samsung,pins" property of the child node. The following pin configuration
-  properties are supported.
-
-  - samsung,pin-val: Initial value of pin output buffer.
-  - samsung,pin-pud: Pull up/down configuration.
-  - samsung,pin-drv: Drive strength configuration.
-  - samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
-  - samsung,pin-drv-pdn: Drive strength configuration in power down mode.
-
-  The values specified by these config properties should be derived from the
-  hardware manual and these values are programmed as-is into the pin
-  pull up/down and driver strength register of the pin-controller.
-
-  Note: A child should include at least a pin function selection property or
-  pin configuration property (one or more) or both.
-
-  The client nodes that require a particular pin function selection and/or
-  pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
-  file.
-
-External GPIO and Wakeup Interrupts:
-
-The controller supports two types of external interrupts over gpio. The first
-is the external gpio interrupt and second is the external wakeup interrupts.
-The difference between the two is that the external wakeup interrupts can be
-used as system wakeup events.
-
-A. External GPIO Interrupts: For supporting external gpio interrupts, the
-   following properties should be specified in the pin-controller device node.
-
-   - interrupts: interrupt specifier for the controller. The format and value of
-     the interrupt specifier depends on the interrupt parent for the controller.
-
-   In addition, following properties must be present in node of every bank
-   of pins supporting GPIO interrupts:
-
-   - interrupt-controller: identifies the controller node as interrupt-parent.
-   - #interrupt-cells: the value of this property should be 2.
-     - First Cell: represents the external gpio interrupt number local to the
-       external gpio interrupt space of the controller.
-     - Second Cell: flags to identify the type of the interrupt
-       - 1 = rising edge triggered
-       - 2 = falling edge triggered
-       - 3 = rising and falling edge triggered
-       - 4 = high level triggered
-       - 8 = low level triggered
-
-B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
-   child node representing the external wakeup interrupt controller should be
-   included in the pin-controller device node.
-
-   Only one pin-controller device node can include external wakeup interrupts
-   child node (in other words, only one External Wakeup Interrupts
-   pin-controller is supported).
-
-   This child node should include following properties:
-
-   - compatible: identifies the type of the external wakeup interrupt controller
-     The possible values are:
-     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
-     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C2412 and S3C2413 SoCs,
-     - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S3C64xx SoCs,
-     - samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung S5Pv210 SoCs,
-     - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
-     - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
-       found on Samsung Exynos7 SoC.
-   - interrupts: interrupt used by multiplexed wakeup interrupts.
-
-   In addition, following properties must be present in node of every bank
-   of pins supporting wake-up interrupts:
-
-   - interrupt-controller: identifies the node as interrupt-parent.
-   - #interrupt-cells: the value of this property should be 2
-     - First Cell: represents the external wakeup interrupt number local to
-       the external wakeup interrupt space of the controller.
-     - Second Cell: flags to identify the type of the interrupt
-       - 1 = rising edge triggered
-       - 2 = falling edge triggered
-       - 3 = rising and falling edge triggered
-       - 4 = high level triggered
-       - 8 = low level triggered
-
-   Node of every bank of pins supporting direct wake-up interrupts (without
-   multiplexing) must contain following properties:
-
-   - interrupts: interrupts of the interrupt parent which are used for external
-     wakeup interrupts from pins of the bank, must contain interrupts for all
-     pins of the bank.
-
-Aliases:
-
-All the pin controller nodes should be represented in the aliases node using
-the following format 'pinctrl{n}' where n is a unique number for the alias.
-
-Aliases for controllers compatible with "samsung,exynos7-pinctrl":
-- pinctrl0: pin controller of ALIVE block,
-- pinctrl1: pin controller of BUS0 block,
-- pinctrl2: pin controller of NFC block,
-- pinctrl3: pin controller of TOUCH block,
-- pinctrl4: pin controller of FF block,
-- pinctrl5: pin controller of ESE block,
-- pinctrl6: pin controller of FSYS0 block,
-- pinctrl7: pin controller of FSYS1 block,
-- pinctrl8: pin controller of BUS1 block,
-- pinctrl9: pin controller of AUDIO block,
-
-Example: A pin-controller node with pin banks:
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-
-		/* ... */
-
-		/* Pin bank without external interrupts */
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		/* ... */
-
-		/* Pin bank with external GPIO or muxed wake-up interrupts */
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		/* ... */
-
-		/* Pin bank with external direct wake-up interrupts */
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		/* ... */
-	};
-
-Example 1: A pin-controller node with pin groups.
-
-	#include <dt-bindings/pinctrl/samsung.h>
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-
-		/* ... */
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			part-1 {
-				samsung,pins = "gpk0-3", "gpk0-4",
-						"gpk0-5", "gpk0-6";
-				samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-			};
-			part-2 {
-				samsung,pins = "gpk1-3", "gpk1-4",
-						"gpk1-5", "gpk1-6";
-				samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-				samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-				samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-			};
-		};
-	};
-
-Example 2: A pin-controller node with external wakeup interrupt controller node.
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>
-
-		/* ... */
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
-Example 3: A uart client node that supports 'default' and 'flow-control' states.
-
-	uart@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-		pinctrl-names = "default", "flow-control;
-		pinctrl-0 = <&uart0_data>;
-		pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
-	};
-
-Example 4: Set up the default pin state for uart controller.
-
-	static int s3c24xx_serial_probe(struct platform_device *pdev) {
-		struct pinctrl *pinctrl;
-
-		/* ... */
-
-		pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	}
-
-Example 5: A display port client node that supports 'default' pinctrl state
-	   and gpio binding.
-
-	display-port-controller {
-		/* ... */
-
-		samsung,hpd-gpio = <&gpx2 6 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-	};
-
-Example 6: Request the gpio for display port controller
-
-	static int exynos_dp_probe(struct platform_device *pdev)
-	{
-		int hpd_gpio, ret;
-		struct device *dev = &pdev->dev;
-		struct device_node *dp_node = dev->of_node;
-
-		/* ... */
-
-		hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
-
-		/* ... */
-
-		ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
-					    "hpd_gpio");
-		/* ... */
-	}
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
index a804d9bc1602..14a8c0215cc6 100644
--- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
 
 properties:
-  $nodename:
-    pattern: "pinctrl"
-
   compatible:
     enum:
       - socionext,uniphier-ld4-pinctrl
@@ -26,11 +23,48 @@ properties:
       - socionext,uniphier-pxs3-pinctrl
       - socionext,uniphier-nx1-pinctrl
 
+additionalProperties:
+  type: object
+
+  allOf:
+    - $ref: pincfg-node.yaml#
+    - $ref: pinmux-node.yaml#
+
+  properties:
+    phandle: true
+    function: true
+    groups: true
+    pins: true
+    bias-pull-up: true
+    bias-pull-down: true
+    bias-pull-pin-default: true
+    drive-strength: true
+
+  additionalProperties:
+    type: object
+
+    allOf:
+      - $ref: pincfg-node.yaml#
+      - $ref: pinmux-node.yaml#
+
+    properties:
+      phandle: true
+      function: true
+      groups: true
+      pins: true
+      bias-pull-up: true
+      bias-pull-down: true
+      bias-pull-pin-default: true
+      drive-strength: true
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
 
-additionalProperties: false
-
 examples:
   - |
     // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index ac88e01ec430..9d59208d83c1 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -41,11 +41,13 @@ properties:
     maxItems: 1
 
   st,syscfg:
-    description: Should be phandle/offset/mask
-      - Phandle to the syscon node which includes IRQ mux selection.
-      - The offset of the IRQ mux selection register.
-      - The field mask of IRQ mux, needed if different of 0xf.
+    description: Phandle+args to the syscon node which includes IRQ mux selection.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      - items:
+          - description: syscon node which includes IRQ mux selection
+          - description: The offset of the IRQ mux selection register
+          - description: The field mask of IRQ mux, needed if different of 0xf
 
   st,package:
     description:
@@ -57,18 +59,22 @@ properties:
 patternProperties:
   '^gpio@[0-9a-f]*$':
     type: object
+    additionalProperties: false
     properties:
       gpio-controller: true
       '#gpio-cells':
         const: 2
+      interrupt-controller: true
+      '#interrupt-cells':
+        const: 2
 
       reg:
         maxItems: 1
       clocks:
         maxItems: 1
-      reset:
-        minItems: 1
+      resets:
         maxItems: 1
+      gpio-line-names: true
       gpio-ranges:
         minItems: 1
         maxItems: 16
@@ -104,6 +110,12 @@ patternProperties:
         minimum: 0
         maximum: 11
 
+    patternProperties:
+      "^(.+-hog(-[0-9]+)?)$":
+        type: object
+        required:
+          - gpio-hog
+
     required:
       - gpio-controller
       - '#gpio-cells'
@@ -113,9 +125,12 @@ patternProperties:
 
   '-[0-9]*$':
     type: object
+    additionalProperties: false
+
     patternProperties:
       '^pins':
         type: object
+        additionalProperties: false
         description: |
           A pinctrl node should contain at least one subnode representing the
           pinctrl group available on the machine. Each subnode will list the
@@ -183,6 +198,9 @@ patternProperties:
         required:
           - pinmux
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - '#address-cells'
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
index 92963604422f..69c0dd9998ea 100644
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: StarFive JH7100 Pin Controller Device Tree Bindings
+title: StarFive JH7100 Pin Controller
 
 description: |
   Bindings for the JH7100 RISC-V SoC from StarFive Ltd.
@@ -165,7 +165,7 @@ examples:
   - |
     #include <dt-bindings/clock/starfive-jh7100.h>
     #include <dt-bindings/reset/starfive-jh7100.h>
-    #include <dt-bindings/pinctrl/pinctrl-starfive.h>
+    #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
 
     soc {
         #address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
new file mode 100644
index 000000000000..347061eece9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -0,0 +1,377 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Pin Controller
+
+maintainers:
+  - Dvorkin Dmitry <dvorkin@tibbo.com>
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  The Sunplus SP7021 pin controller is used to control SoC pins. Please
+  refer to pinctrl-bindings.txt in this directory for details of the common
+  pinctrl bindings used by client devices.
+
+  SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
+  are multiplexed with some special function pins. SP7021 has 3 types of
+  special function pins:
+
+  (1) function-group pins:
+      Ex 1 (SPI-NOR flash):
+        If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
+        will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
+        and 81 will be pins of SPI-NOR flash.
+
+      Ex 2 (UART_0):
+        If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
+        RX pins of UART_0 (UART channel 0).
+
+      Ex 3 (eMMC):
+        If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
+        78, 79, 80, 81 will be pins of an eMMC device.
+
+      Properties "function" and "groups" are used to select function-group
+      pins.
+
+  (2) fully pin-mux (like phone exchange mux) pins:
+      GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
+      SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
+      can be routed to any pins of fully pin-mux pins.
+
+      Ex 1 (UART channel 1):
+        If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
+        routed to GPIO 10 (3 - 1 + 8 = 10).
+        If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
+        routed to GPIO 11 (4 - 1 + 8 = 11).
+        If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
+        be routed to GPIO 12 (5 - 1 + 8 = 12).
+        If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
+        be routed to GPIO 13 (6 - 1 + 8 = 13).
+
+      Ex 2 (I2C channel 0):
+        If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
+        be routed to GPIO 27 (20 - 1 + 8 = 27).
+        If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
+        will be routed to GPIO 28 (21 - 1 + 9 = 28).
+
+      Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
+      routed to any of 64 'fully pin-mux' pins.
+
+  (3) I/O processor pins
+      SP7021 has a built-in I/O processor.
+      Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
+
+  Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
+  "I/O processor pins" and "digital GPIO" pins.
+
+  The device node of pin controller of Sunplus SP7021 has following
+  properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-pctl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  reg:
+    items:
+      - description: the MOON2 registers
+      - description: the GPIOXT registers
+      - description: the FIRST registers
+      - description: the MOON1 registers
+
+  reg-names:
+    items:
+      - const: moon2
+      - const: gpioxt
+      - const: first
+      - const: moon1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: |
+      A pinctrl node should contain at least one subnodes representing the
+      pins or function-pins group available on the machine. Each subnode
+      will list the pins it needs, and how they should be configured.
+
+      Pinctrl node's client devices use subnodes for desired pin
+      configuration. Client device subnodes use below standard properties.
+    $ref: pinmux-node.yaml#
+
+    properties:
+      sunplus,pins:
+        description: |
+          Define 'sunplus,pins' which are used by pinctrl node's client
+          device.
+
+          It consists of one or more integers which represents the config
+          setting for corresponding pin. Each integer defines a individual
+          pin in which:
+
+          Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
+          Bit 23~16: defines types: (1) fully pin-mux pins
+                                    (2) IO processor pins
+                                    (3) digital GPIO pins
+          Bit 15~8:  defines pins of peripherals (which are defined in
+                     'include/dt-binging/pinctrl/sppctl.h').
+          Bit 7~0:   defines types or initial-state of digital GPIO pins.
+
+          Please use macro SPPCTL_IOPAD to define the integers for pins.
+
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+      function:
+        description: |
+          Define pin-function which is used by pinctrl node's client device.
+          The name should be one of string in the following enumeration.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
+                UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
+
+      groups:
+        description: |
+          Define pin-group in a specified pin-function.
+          The name should be one of string in the following enumeration.
+        $ref: "/schemas/types.yaml#/definitions/string"
+        enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
+                SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
+                HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
+
+      sunplus,zerofunc:
+        description: |
+          This is a vendor specific property. It is used to disable pins
+          which are not used by pinctrl node's client device.
+          Some pins may be enabled by boot-loader. We can use this
+          property to disable them.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_FLASH
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_FLASH1
+                - SPI_FLASH2
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_FLASH_4BIT
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_FLASH_4BIT1
+                - SPI_FLASH_4BIT2
+      - if:
+          properties:
+            function:
+              enum:
+                - SPI_NAND
+        then:
+          properties:
+            groups:
+              enum:
+                - SPI_NAND
+      - if:
+          properties:
+            function:
+              enum:
+                - CARD0_EMMC
+        then:
+          properties:
+            groups:
+              enum:
+                - CARD0_EMMC
+      - if:
+          properties:
+            function:
+              enum:
+                - SD_CARD
+        then:
+          properties:
+            groups:
+              enum:
+                - SD_CARD
+      - if:
+          properties:
+            function:
+              enum:
+                - UA0
+        then:
+          properties:
+            groups:
+              enum:
+                - UA0
+      - if:
+          properties:
+            function:
+              enum:
+                - FPGA_IFX
+        then:
+          properties:
+            groups:
+              enum:
+                - FPGA_IFX
+      - if:
+          properties:
+            function:
+              enum:
+                - HDMI_TX
+        then:
+          properties:
+            groups:
+              enum:
+                - HDMI_TX1
+                - HDMI_TX2
+                - HDMI_TX3
+      - if:
+          properties:
+            function:
+              enum:
+                - LCDIF
+        then:
+          properties:
+            groups:
+              enum:
+                - LCDIF
+      - if:
+          properties:
+            function:
+              enum:
+                - USB0_OTG
+        then:
+          properties:
+            groups:
+              enum:
+                - USB0_OTG
+      - if:
+          properties:
+            function:
+              enum:
+                - USB1_OTG
+        then:
+          properties:
+            groups:
+              enum:
+                - USB1_OTG
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+  - resets
+
+additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/sppctl-sp7021.h>
+
+    pinctrl@9c000100 {
+        compatible = "sunplus,sp7021-pctl";
+        reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
+              <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
+        reg-names = "moon2", "gpioxt", "first", "moon1";
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clkc 0x83>;
+        resets = <&rstc 0x73>;
+
+        uart0-pins {
+            function = "UA0";
+            groups = "UA0";
+        };
+
+        spinand0-pins {
+            function = "SPI_NAND";
+            groups = "SPI_NAND";
+        };
+
+        uart1-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+                SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+            >;
+        };
+
+        uart2-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+                SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+                SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
+                SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
+            >;
+        };
+
+        emmc-pins {
+            function = "CARD0_EMMC";
+            groups = "CARD0_EMMC";
+        };
+
+        sdcard-pins {
+            function = "SD_CARD";
+            groups = "SD_CARD";
+            sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+        };
+
+        hdmi_A_tx1-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX1";
+        };
+        hdmi_A_tx2-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX2";
+        };
+        hdmi_A_tx3-pins {
+            function = "HDMI_TX";
+            groups = "HDMI_TX3";
+        };
+
+        ethernet-pins {
+            sunplus,pins = <
+                SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+                SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+                SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+                SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+                SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+                SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+                SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+                SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+                SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+            >;
+            sunplus,zerofunc = <
+                MUXF_L2SW_LED_FLASH0
+                MUXF_L2SW_LED_ON0
+                MUXF_L2SW_P0_MAC_RMII_RXER
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
index 9f1dab0c2430..98b4663f9766 100644
--- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -20,6 +20,9 @@ properties:
   reg:
     maxItems: 1
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
@@ -33,6 +36,7 @@ patternProperties:
       pins it needs, and how they should be configured, with regard to muxer
       configuration, pullups, drive strength.
     $ref: "pinmux-node.yaml"
+    additionalProperties: false
 
     properties:
       function:
@@ -80,7 +84,7 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        pmux: pmux@24190000 {
+        pmux: pinmux@24190000 {
             compatible = "toshiba,tmpv7708-pinctrl";
             reg = <0 0x24190000 0 0x10000>;
 
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
index ac97dbf6998e..cfd0cc549a7b 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -167,6 +167,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: "pinctrl.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 8ef0d07d35fe..2722dc7bb03d 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -290,6 +290,9 @@ patternProperties:
 
     additionalProperties: false
 
+allOf:
+  - $ref: pinctrl.yaml#
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index f005abac7079..43a932237a92 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/amlogic,meson-ee-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Everything-Else Power Domains
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |+
   The Everything-Else Power Domains node should be the child of a syscon
@@ -17,7 +17,7 @@ description: |+
   - compatible: Should be the following:
                 "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
index 5dae04d2936c..eab21bb2050a 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
@@ -3,8 +3,8 @@
 # Author: Jianxin Pan <jianxin.pan@amlogic.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/amlogic,meson-sec-pwrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Secure Power Domains
 
@@ -12,13 +12,14 @@ maintainers:
   - Jianxin Pan <jianxin.pan@amlogic.com>
 
 description: |+
-  Secure Power Domains used in Meson A1/C1 SoCs, and should be the child node
+  Secure Power Domains used in Meson A1/C1/S4 SoCs, and should be the child node
   of secure-monitor.
 
 properties:
   compatible:
     enum:
       - amlogic,meson-a1-pwrc
+      - amlogic,meson-s4-pwrc
 
   "#power-domain-cells":
     const: 1
@@ -39,4 +40,3 @@ examples:
             #power-domain-cells = <1>;
         };
     };
-
diff --git a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
index 19a194980142..94d369eb85de 100644
--- a/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
+++ b/Documentation/devicetree/bindings/power/apple,pmgr-pwrstate.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Hector Martin <marcan@marcan.st>
 
 allOf:
-  - $ref: "power-domain.yaml#"
+  - $ref: power-domain.yaml#
 
 description: |
   Apple SoCs include PMGR blocks responsible for power management,
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
deleted file mode 100644
index ab0d5ebbad4e..000000000000
--- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt
+++ /dev/null
@@ -1,130 +0,0 @@
-QCOM CPR (Core Power Reduction)
-
-CPR (Core Power Reduction) is a technology to reduce core power on a CPU
-or other device. Each OPP of a device corresponds to a "corner" that has
-a range of valid voltages for a particular frequency. While the device is
-running at a particular frequency, CPR monitors dynamic factors such as
-temperature, etc. and suggests adjustments to the voltage to save power
-and meet silicon characteristic requirements.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the rbcpr register region
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the CPR interrupt
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: phandle to the reference clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ref"
-
-- vdd-apc-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to the vdd-apc-supply regulator
-
-- #power-domain-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: should be 0
-
-- operating-points-v2:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the OPP table containing the
-		    performance states supported by the CPR
-		    power domain
-
-- acc-syscon:
-	Usage: optional
-	Value type: <phandle>
-	Definition: phandle to syscon for writing ACC settings
-
-- nvmem-cells:
-	Usage: required
-	Value type: <phandle>
-	Definition: phandle to nvmem cells containing the data
-		    that makes up a fuse corner, for each fuse corner.
-		    As well as the CPR fuse revision.
-
-- nvmem-cell-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2",
-		    "cpr_quotient_offset3", "cpr_init_voltage1",
-		    "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1",
-		    "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1",
-		    "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision"
-		    for qcs404.
-
-Example:
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-	power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xo_board>;
-		clock-names = "ref";
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		acc-syscon = <&tcsr>;
-
-		nvmem-cells = <&cpr_efuse_quot_offset1>,
-			<&cpr_efuse_quot_offset2>,
-			<&cpr_efuse_quot_offset3>,
-			<&cpr_efuse_init_voltage1>,
-			<&cpr_efuse_init_voltage2>,
-			<&cpr_efuse_init_voltage3>,
-			<&cpr_efuse_quot1>,
-			<&cpr_efuse_quot2>,
-			<&cpr_efuse_quot3>,
-			<&cpr_efuse_ring1>,
-			<&cpr_efuse_ring2>,
-			<&cpr_efuse_ring3>,
-			<&cpr_efuse_revision>;
-		nvmem-cell-names = "cpr_quotient_offset1",
-			"cpr_quotient_offset2",
-			"cpr_quotient_offset3",
-			"cpr_init_voltage1",
-			"cpr_init_voltage2",
-			"cpr_init_voltage3",
-			"cpr_quotient1",
-			"cpr_quotient2",
-			"cpr_quotient3",
-			"cpr_ring_osc1",
-			"cpr_ring_osc2",
-			"cpr_ring_osc3",
-			"cpr_fuse_revision";
-	};
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
new file mode 100644
index 000000000000..301db7daf870
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Core Power Reduction (CPR) bindings
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+description: |
+  CPR (Core Power Reduction) is a technology to reduce core power on a CPU
+  or other device. Each OPP of a device corresponds to a "corner" that has
+  a range of valid voltages for a particular frequency. While the device is
+  running at a particular frequency, CPR monitors dynamic factors such as
+  temperature, etc. and suggests adjustments to the voltage to save power
+  and meet silicon characteristic requirements.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qcs404-cpr
+      - const: qcom,cpr
+
+  reg:
+    description: Base address and size of the RBCPR register region.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference clock.
+
+  clock-names:
+    items:
+      - const: ref
+
+  vdd-apc-supply:
+    description: APC regulator supply.
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2:
+    description: |
+      A phandle to the OPP table containing the performance states
+      supported by the CPR power domain.
+
+  acc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to the syscon used for writing ACC settings.
+
+  nvmem-cells:
+    items:
+      - description: Corner 1 quotient offset
+      - description: Corner 2 quotient offset
+      - description: Corner 3 quotient offset
+      - description: Corner 1 initial voltage
+      - description: Corner 2 initial voltage
+      - description: Corner 3 initial voltage
+      - description: Corner 1 quotient
+      - description: Corner 2 quotient
+      - description: Corner 3 quotient
+      - description: Corner 1 ring oscillator
+      - description: Corner 2 ring oscillator
+      - description: Corner 3 ring oscillator
+      - description: Fuse revision
+
+  nvmem-cell-names:
+    items:
+      - const: cpr_quotient_offset1
+      - const: cpr_quotient_offset2
+      - const: cpr_quotient_offset3
+      - const: cpr_init_voltage1
+      - const: cpr_init_voltage2
+      - const: cpr_init_voltage3
+      - const: cpr_quotient1
+      - const: cpr_quotient2
+      - const: cpr_quotient3
+      - const: cpr_ring_osc1
+      - const: cpr_ring_osc2
+      - const: cpr_ring_osc3
+      - const: cpr_fuse_revision
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vdd-apc-supply
+  - '#power-domain-cells'
+  - operating-points-v2
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
+
+    power-controller@b018000 {
+        compatible = "qcom,qcs404-cpr", "qcom,cpr";
+        reg = <0x0b018000 0x1000>;
+        interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&xo_board>;
+        clock-names = "ref";
+        vdd-apc-supply = <&pms405_s3>;
+        #power-domain-cells = <0>;
+        operating-points-v2 = <&cpr_opp_table>;
+        acc-syscon = <&tcsr>;
+
+        nvmem-cells = <&cpr_efuse_quot_offset1>,
+            <&cpr_efuse_quot_offset2>,
+            <&cpr_efuse_quot_offset3>,
+            <&cpr_efuse_init_voltage1>,
+            <&cpr_efuse_init_voltage2>,
+            <&cpr_efuse_init_voltage3>,
+            <&cpr_efuse_quot1>,
+            <&cpr_efuse_quot2>,
+            <&cpr_efuse_quot3>,
+            <&cpr_efuse_ring1>,
+            <&cpr_efuse_ring2>,
+            <&cpr_efuse_ring3>,
+            <&cpr_efuse_revision>;
+        nvmem-cell-names = "cpr_quotient_offset1",
+            "cpr_quotient_offset2",
+            "cpr_quotient_offset3",
+            "cpr_init_voltage1",
+            "cpr_init_voltage2",
+            "cpr_init_voltage3",
+            "cpr_quotient1",
+            "cpr_quotient2",
+            "cpr_quotient3",
+            "cpr_ring_osc1",
+            "cpr_ring_osc2",
+            "cpr_ring_osc3",
+            "cpr_fuse_revision";
+    };
diff --git a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
index 63b15ac6dde4..d867bd6976d8 100644
--- a/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
+++ b/Documentation/devicetree/bindings/power/brcm,bcm63xx-power.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/brcm,bcm63xx-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: BCM63xx power domain driver
 
diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.yaml b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
index 6a12efdf436a..4ee920a1de69 100644
--- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
@@ -20,6 +20,7 @@ properties:
 patternProperties:
   "^(cpu|cluster|domain)-":
     type: object
+    additionalProperties: false
     description:
       Each state node represents a domain idle state description.
 
@@ -44,6 +45,15 @@ patternProperties:
           state will yield power benefits, after overcoming the overhead while
           entering the idle state.
 
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
     required:
       - compatible
       - entry-latency-us
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
index a055b3e819d8..777e1d852ddd 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.yaml
@@ -43,11 +43,21 @@ properties:
 
   pgc:
     type: object
+    additionalProperties: false
     description: list of power domains provided by this controller.
 
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
     patternProperties:
       "power-domain@[0-9]$":
         type: object
+        additionalProperties: false
+
         properties:
 
           '#power-domain-cells':
@@ -78,6 +88,10 @@ properties:
           - '#power-domain-cells'
           - reg
 
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
index 01bdda167eef..dfdb8dfb6b65 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
@@ -28,6 +28,7 @@ properties:
       - fsl,imx8mn-gpc
       - fsl,imx8mq-gpc
       - fsl,imx8mm-gpc
+      - fsl,imx8mp-gpc
 
   reg:
     maxItems: 1
@@ -41,11 +42,21 @@ properties:
 
   pgc:
     type: object
+    additionalProperties: false
     description: list of power domains provided by this controller.
 
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
     patternProperties:
-      "power-domain@[0-9]$":
+      "power-domain@[0-9a-f]+$":
         type: object
+        additionalProperties: false
+
         properties:
 
           '#power-domain-cells':
@@ -57,6 +68,7 @@ properties:
               include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
               include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
               include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
+              include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc
             maxItems: 1
 
           clocks:
@@ -69,6 +81,9 @@ properties:
 
           power-supply: true
 
+          power-domains:
+            maxItems: 1
+
           resets:
             description: |
               A number of phandles to resets that need to be asserted during
@@ -83,6 +98,10 @@ properties:
           - '#power-domain-cells'
           - reg
 
+    required:
+      - '#address-cells'
+      - '#size-cells'
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
new file mode 100644
index 000000000000..1f72b18ca0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/fsl,scu-pd.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/fsl,scu-pd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Power domain bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  Power domain bindings based on SCU Message Protocol
+
+allOf:
+  - $ref: power-domain.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qm-scu-pd
+          - fsl,imx8qxp-scu-pd
+      - const: fsl,scu-pd
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    power-controller {
+        compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
index f234a756c193..605ec7ab5f63 100644
--- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Mediatek Power Domains Controller
 
 maintainers:
-  - Weiyi Lu <weiyi.lu@mediatek.com>
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
   - Matthias Brugger <mbrugger@suse.com>
 
 description: |
@@ -19,14 +19,17 @@ description: |
 
 properties:
   $nodename:
-    const: power-controller
+    pattern: '^power-controller(@[0-9a-f]+)?$'
 
   compatible:
     enum:
+      - mediatek,mt6795-power-controller
       - mediatek,mt8167-power-controller
       - mediatek,mt8173-power-controller
       - mediatek,mt8183-power-controller
+      - mediatek,mt8186-power-controller
       - mediatek,mt8192-power-controller
+      - mediatek,mt8195-power-controller
 
   '#power-domain-cells':
     const: 1
@@ -39,6 +42,23 @@ properties:
 
 patternProperties:
   "^power-domain@[0-9a-f]+$":
+    $ref: "#/$defs/power-domain-node"
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+        $ref: "#/$defs/power-domain-node"
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+            $ref: "#/$defs/power-domain-node"
+            patternProperties:
+              "^power-domain@[0-9a-f]+$":
+                $ref: "#/$defs/power-domain-node"
+                unevaluatedProperties: false
+            unevaluatedProperties: false
+        unevaluatedProperties: false
+    unevaluatedProperties: false
+
+$defs:
+  power-domain-node:
     type: object
     description: |
       Represents the power domains within the power controller node as documented
@@ -60,10 +80,12 @@ patternProperties:
       reg:
         description: |
           Power domain index. Valid values are defined in:
+              "include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
               "include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
               "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
               "include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
               "include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
+              "include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
         maxItems: 1
 
       clocks:
@@ -95,123 +117,9 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/phandle
         description: phandle to the device containing the SMI register range.
 
-    patternProperties:
-      "^power-domain@[0-9a-f]+$":
-        type: object
-        description: |
-          Represents a power domain child within a power domain parent node.
-
-        properties:
-
-          '#power-domain-cells':
-            description:
-              Must be 0 for nodes representing a single PM domain and 1 for nodes
-              providing multiple PM domains.
-
-          '#address-cells':
-            const: 1
-
-          '#size-cells':
-            const: 0
-
-          reg:
-            maxItems: 1
-
-          clocks:
-            description: |
-              A number of phandles to clocks that need to be enabled during domain
-              power-up sequencing.
-
-          clock-names:
-            description: |
-              List of names of clocks, in order to match the power-up sequencing
-              for each power domain we need to group the clocks by name. BASIC
-              clocks need to be enabled before enabling the corresponding power
-              domain, and should not have a '-' in their name (i.e mm, mfg, venc).
-              SUSBYS clocks need to be enabled before releasing the bus protection,
-              and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
-
-              In order to follow properly the power-up sequencing, the clocks must
-              be specified by order, adding first the BASIC clocks followed by the
-              SUSBSYS clocks.
-
-          domain-supply:
-            description: domain regulator supply.
-
-          mediatek,infracfg:
-            $ref: /schemas/types.yaml#/definitions/phandle
-            description: phandle to the device containing the INFRACFG register range.
-
-          mediatek,smi:
-            $ref: /schemas/types.yaml#/definitions/phandle
-            description: phandle to the device containing the SMI register range.
-
-        patternProperties:
-          "^power-domain@[0-9a-f]+$":
-            type: object
-            description: |
-              Represents a power domain child within a power domain parent node.
-
-            properties:
-
-              '#power-domain-cells':
-                description:
-                  Must be 0 for nodes representing a single PM domain and 1 for nodes
-                  providing multiple PM domains.
-
-              '#address-cells':
-                const: 1
-
-              '#size-cells':
-                const: 0
-
-              reg:
-                maxItems: 1
-
-              clocks:
-                description: |
-                  A number of phandles to clocks that need to be enabled during domain
-                  power-up sequencing.
-
-              clock-names:
-                description: |
-                  List of names of clocks, in order to match the power-up sequencing
-                  for each power domain we need to group the clocks by name. BASIC
-                  clocks need to be enabled before enabling the corresponding power
-                  domain, and should not have a '-' in their name (i.e mm, mfg, venc).
-                  SUSBYS clocks need to be enabled before releasing the bus protection,
-                  and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
-
-                  In order to follow properly the power-up sequencing, the clocks must
-                  be specified by order, adding first the BASIC clocks followed by the
-                  SUSBSYS clocks.
-
-              domain-supply:
-                description: domain regulator supply.
-
-              mediatek,infracfg:
-                $ref: /schemas/types.yaml#/definitions/phandle
-                description: phandle to the device containing the INFRACFG register range.
-
-              mediatek,smi:
-                $ref: /schemas/types.yaml#/definitions/phandle
-                description: phandle to the device containing the SMI register range.
-
-            required:
-              - reg
-
-            additionalProperties: false
-
-        required:
-          - reg
-
-        additionalProperties: false
-
     required:
       - reg
 
-    additionalProperties: false
-
 required:
   - compatible
 
@@ -227,7 +135,7 @@ examples:
         #size-cells = <2>;
 
         scpsys: syscon@10006000 {
-            compatible = "syscon", "simple-mfd";
+            compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
             reg = <0 0x10006000 0 0x1000>;
 
             spm: power-controller {
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index 3143ed9a3313..889091b9814f 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -29,6 +29,8 @@ properties:
 
   domain-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Phandles of idle states that defines the available states for the
       power-domain provider. The idle state definitions are compatible with the
@@ -42,6 +44,8 @@ properties:
 
   operating-points-v2:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Phandles to the OPP tables of power domains provided by a power domain
       provider. If the provider provides a single power domain only or all
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
index f48bc41d81ec..5b4eda919911 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm RPM/RPMh Power domains
 
 maintainers:
-  - Rajendra Nayak <rnayak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description:
   For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
@@ -17,6 +17,8 @@ properties:
   compatible:
     enum:
       - qcom,mdm9607-rpmpd
+      - qcom,msm8226-rpmpd
+      - qcom,msm8909-rpmpd
       - qcom,msm8916-rpmpd
       - qcom,msm8939-rpmpd
       - qcom,msm8953-rpmpd
@@ -26,15 +28,19 @@ properties:
       - qcom,msm8998-rpmpd
       - qcom,qcm2290-rpmpd
       - qcom,qcs404-rpmpd
+      - qcom,sa8540p-rpmhpd
       - qcom,sdm660-rpmpd
       - qcom,sc7180-rpmhpd
       - qcom,sc7280-rpmhpd
       - qcom,sc8180x-rpmhpd
+      - qcom,sc8280xp-rpmhpd
       - qcom,sdm845-rpmhpd
       - qcom,sdx55-rpmhpd
+      - qcom,sdx65-rpmhpd
       - qcom,sm6115-rpmpd
       - qcom,sm6125-rpmpd
       - qcom,sm6350-rpmhpd
+      - qcom,sm6375-rpmpd
       - qcom,sm8150-rpmhpd
       - qcom,sm8250-rpmhpd
       - qcom,sm8350-rpmhpd
diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.yaml b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
index 391897d897f2..f2cc89e7f4e4 100644
--- a/Documentation/devicetree/bindings/power/renesas,apmu.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,apmu.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/renesas,apmu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/renesas,apmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Advanced Power Management Unit
 
@@ -35,6 +35,9 @@ properties:
 
   cpus:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      minItems: 1
+      maxItems: 4
     description: |
       Array of phandles pointing to CPU cores, which should match the order of
       CPU cores used by the WUPCR and PSTR registers in the Advanced Power
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index 62a49ca319ec..0720b54881c2 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/renesas,rcar-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas R-Car and RZ/G System Controller
 
@@ -10,9 +10,11 @@ maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
   - Magnus Damm <magnus.damm@gmail.com>
 
-description:
+description: |
   The R-Car (RZ/G) System Controller provides power management for the CPU
   cores and various coprocessors.
+  The power domain IDs for consumers are defined in header files::
+  include/dt-bindings/power/r8*-sysc.h
 
 properties:
   compatible:
@@ -42,6 +44,7 @@ properties:
       - renesas,r8a77995-sysc # R-Car D3
       - renesas,r8a779a0-sysc # R-Car V3U
       - renesas,r8a779f0-sysc # R-Car S4-8
+      - renesas,r8a779g0-sysc # R-Car V4H
 
   reg:
     maxItems: 1
@@ -64,14 +67,3 @@ examples:
             reg = <0xe6180000 0x0200>;
             #power-domain-cells = <1>;
     };
-
-  - |
-    // Power Domain consumers
-    #include <dt-bindings/power/r8a7791-sysc.h>
-
-    cache-controller-0 {
-            compatible = "cache";
-            power-domains = <&sysc R8A7791_PD_CA15_SCU>;
-            cache-unified;
-            cache-level = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt
deleted file mode 100644
index af3701bc15c4..000000000000
--- a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Drive a GPIO line that can be used to restart the system from a restart
-handler.
-
-This binding supports level and edge triggered reset.  At driver load
-time, the driver will request the given gpio line and install a restart
-handler. If the optional properties 'open-source' is not found, the GPIO line
-will be driven in the inactive state.  Otherwise its not driven until
-the restart is initiated.
-
-When the system is restarted, the restart handler will be invoked in
-priority order.  The gpio is configured as an output, and driven active,
-triggering a level triggered reset condition. This will also cause an
-inactive->active edge condition, triggering positive edge triggered
-reset. After a delay specified by active-delay, the GPIO is set to
-inactive, thus causing an active->inactive edge, triggering negative edge
-triggered reset. After a delay specified by inactive-delay, the GPIO
-is driven active again.  After a delay specified by wait-delay, the
-restart handler completes allowing other restart handlers to be attempted.
-
-Required properties:
-- compatible : should be "gpio-restart".
-- gpios : The GPIO to set high/low, see "gpios property" in
-  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
-  low to reset the board set it to "Active Low", otherwise set
-  gpio to "Active High".
-
-Optional properties:
-- open-source : Treat the GPIO as being open source and defer driving
-  it to when the restart is initiated.  If this optional property is not
-  specified, the GPIO is initialized as an output in its inactive state.
-- priority : A priority ranging from 0 to 255 (default 128) according to
-  the following guidelines:
-	0:	Restart handler of last resort, with limited restart
-		capabilities
-	128:	Default restart handler; use if no other restart handler is
-		expected to be available, and/or if restart functionality is
-		sufficient to restart the entire system
-	255:	Highest priority restart handler, will preempt all other
-		restart handlers
-- active-delay: Delay (default 100) to wait after driving gpio active [ms]
-- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
-- wait-delay: Delay (default 3000) to wait after completing restart
-  sequence [ms]
-
-Examples:
-
-gpio-restart {
-	compatible = "gpio-restart";
-	gpios = <&gpio 4 0>;
-	priority = <128>;
-	active-delay = <100>;
-	inactive-delay = <100>;
-	wait-delay = <3000>;
-};
diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
new file mode 100644
index 000000000000..a72d5c721516
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/gpio-restart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled reset
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Drive a GPIO line that can be used to restart the system from a restart handler.
+
+  This binding supports level and edge triggered reset.  At driver load time, the driver will
+  request the given gpio line and install a restart handler. If the optional properties
+  'open-source' is not found, the GPIO line will be driven in the inactive state.  Otherwise its
+  not driven until the restart is initiated.
+
+  When the system is restarted, the restart handler will be invoked in priority order.  The GPIO
+  is configured as an output, and driven active, triggering a level triggered reset condition.
+  This will also cause an inactive->active edge condition, triggering positive edge triggered
+  reset. After a delay specified by active-delay, the GPIO is set to inactive, thus causing an
+  active->inactive edge, triggering negative edge triggered reset. After a delay specified by
+  inactive-delay, the GPIO is driven active again.  After a delay specified by wait-delay, the
+  restart handler completes allowing other restart handlers to be attempted.
+
+properties:
+  compatible:
+    const: gpio-restart
+
+  gpios:
+    description: The GPIO to set high/low, see "gpios property" in
+      Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be low to reset the board
+      set it to "Active Low", otherwise set GPIO to "Active High".
+
+  open-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Treat the GPIO as being open source and defer driving it to when the restart is
+      initiated.  If this optional property is not specified, the GPIO is initialized as an output
+      in its inactive state.
+
+  priority:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      A priority ranging from 0 to 255 (default 129) according to the following guidelines:
+
+        0:   Restart handler of last resort, with limited restart capabilities.
+        128: Default restart handler; use if no other restart handler is expected to be available,
+             and/or if restart functionality is sufficient to restart the entire system.
+        255: Highest priority restart handler, will preempt all other restart handlers.
+    minimum: 0
+    maximum: 255
+    default: 129
+
+  active-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio active [ms]
+    default: 100
+
+  inactive-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 100) to wait after driving gpio inactive [ms]
+    default: 100
+
+  wait-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Delay (default 3000) to wait after completing restart sequence [ms]
+    default: 100
+
+additionalProperties: false
+
+required:
+  - compatible
+  - gpios
+
+examples:
+  - |
+    gpio-restart {
+      compatible = "gpio-restart";
+      gpios = <&gpio 4 0>;
+      priority = <128>;
+      active-delay = <100>;
+      inactive-delay = <100>;
+      wait-delay = <3000>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt b/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt
deleted file mode 100644
index ce44ad357565..000000000000
--- a/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-MSM Restart Driver
-
-A power supply hold (ps-hold) bit is set to power the msm chipsets.
-Clearing that bit allows us to restart/poweroff. The difference
-between poweroff and restart is determined by unique power manager IC
-settings.
-
-Required Properties:
--compatible: "qcom,pshold"
--reg: Specifies the physical address of the ps-hold register
-
-Example:
-
-	restart@fc4ab000 {
-		compatible = "qcom,pshold";
-		reg = <0xfc4ab000 0x4>;
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
index 353f155df0f4..d96170eecbd2 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -15,26 +15,39 @@ description: |
 
   This DT node has pwrkey and resin as sub nodes.
 
-allOf:
-  - $ref: reboot-mode.yaml#
-
 properties:
   compatible:
     enum:
       - qcom,pm8916-pon
       - qcom,pms405-pon
       - qcom,pm8998-pon
+      - qcom,pmk8350-pon
 
   reg:
-    maxItems: 1
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMIC.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
 
   pwrkey:
     type: object
-    $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
 
   resin:
     type: object
-    $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml
 
 required:
   - compatible
@@ -42,6 +55,39 @@ required:
 
 unevaluatedProperties: false
 
+allOf:
+  - $ref: reboot-mode.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-pon
+              - qcom,pms405-pon
+              - qcom,pm8998-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmk8350-pon
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          items:
+            - const: hlos
+            - const: pbs
+
 examples:
   - |
    #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
new file mode 100644
index 000000000000..527962d54a8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pshold.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pshold.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC restart and power off
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  A power supply hold (ps-hold) bit is set to power the Qualcomm chipsets.
+  Clearing that bit allows us to restart/power off. The difference between
+  power off and restart is determined by unique power manager IC settings.
+
+properties:
+  compatible:
+    const: qcom,pshold
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@fc4ab000 {
+        compatible = "qcom,pshold";
+        reg = <0xfc4ab000 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
index 03bd1fa5a623..e9417557cd30 100644
--- a/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
+++ b/Documentation/devicetree/bindings/power/reset/regulator-poweroff.yaml
@@ -16,7 +16,7 @@ description: |
 
 properties:
   compatible:
-    const: "regulator-poweroff"
+    const: regulator-poweroff
 
   cpu-supply:
     description:
diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
index 68d7c14a7163..46de35861738 100644
--- a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
+++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.yaml
@@ -15,7 +15,7 @@ description: |
 
 properties:
   compatible:
-    const: "xlnx,zynqmp-power"
+    const: xlnx,zynqmp-power
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
index 9b9d71087466..0d5e999a58f1 100644
--- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -41,6 +41,8 @@ properties:
       - rockchip,rk3368-power-controller
       - rockchip,rk3399-power-controller
       - rockchip,rk3568-power-controller
+      - rockchip,rk3588-power-controller
+      - rockchip,rv1126-power-controller
 
   "#power-domain-cells":
     const: 1
@@ -119,6 +121,8 @@ $defs:
           "include/dt-bindings/power/rk3368-power.h"
           "include/dt-bindings/power/rk3399-power.h"
           "include/dt-bindings/power/rk3568-power.h"
+          "include/dt-bindings/power/rk3588-power.h"
+          "include/dt-bindings/power/rockchip,rv1126-power.h"
 
       clocks:
         minItems: 1
@@ -129,6 +133,8 @@ $defs:
 
       pm_qos:
         $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
         description: |
           A number of phandles to qos blocks which need to be saved and restored
           while power domain switches state.
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
index 1727bf108979..d71fc72d4464 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.yaml
@@ -58,6 +58,7 @@ properties:
       - rockchip,rk3568-pmu-io-voltage-domain
       - rockchip,rv1108-io-voltage-domain
       - rockchip,rv1108-pmu-io-voltage-domain
+      - rockchip,rv1126-pmu-io-voltage-domain
 
 required:
   - compatible
@@ -78,6 +79,7 @@ allOf:
   - $ref: "#/$defs/rk3568-pmu"
   - $ref: "#/$defs/rv1108"
   - $ref: "#/$defs/rv1108-pmu"
+  - $ref: "#/$defs/rv1126-pmu"
 
 $defs:
   px30:
@@ -344,6 +346,34 @@ $defs:
         pmu-supply:
           description: The supply connected to PMUIO_VDD.
 
+  rv1126-pmu:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rv1126-pmu-io-voltage-domain
+
+    then:
+      properties:
+        vccio1-supply:
+          description: The supply connected to VCCIO1.
+        vccio2-supply:
+          description: The supply connected to VCCIO2.
+        vccio3-supply:
+          description: The supply connected to VCCIO3.
+        vccio4-supply:
+          description: The supply connected to VCCIO4.
+        vccio5-supply:
+          description: The supply connected to VCCIO5.
+        vccio6-supply:
+          description: The supply connected to VCCIO6.
+        vccio7-supply:
+          description: The supply connected to VCCIO7.
+        pmuio0-supply:
+          description: The supply connected to PMUIO0.
+        pmuio1-supply:
+          description: The supply connected to PMUIO1.
+
 examples:
   - |
     io-domains {
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
index 3f74bc19415d..5220d9cb16d8 100644
--- a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Active-semi ACT8945A Charger Function
 
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
index d56ac484fec5..491488e7b970 100644
--- a/Documentation/devicetree/bindings/power/supply/battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -85,8 +85,13 @@ properties:
     description: battery factory internal resistance
 
   resistance-temp-table:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: the temperature in degree Celsius
+        - description: battery internal resistance percent
     description: |
-      An array providing the temperature in degree Celsius
+      A table providing the temperature in degree Celsius
       and corresponding battery internal resistance percent, which is used to
       look up the resistance percent according to current temperature to get an
       accurate batterty internal resistance in different temperatures.
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
index f8461f06e6f4..a3c00e078918 100644
--- a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq2415x.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for TI bq2415x Li-Ion Charger
 
@@ -17,7 +17,6 @@ properties:
   compatible:
     enum:
       - ti,bq24150
-      - ti,bq24150
       - ti,bq24150a
       - ti,bq24151
       - ti,bq24151a
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
index 0d7cbbdf808b..4884ec90e2b8 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq24190.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for TI BQ2419x Li-Ion Battery Charger
 
@@ -28,7 +28,7 @@ properties:
     maxItems: 1
 
   usb-otg-vbus:
-    type: object
+    $ref: /schemas/regulator/regulator.yaml#
     description: |
       Regulator that is used to control the VBUS voltage direction for
       either USB host mode or for charging on the OTG port
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
index 3a0f6cd9015a..c7406bef0fa8 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24257.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq24257.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
index 131be6782c4b..dd9176ce71b3 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24735.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq24735.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for TI BQ24735 Li-Ion Battery Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
index 813d6afde606..1a1b240034ef 100644
--- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -2,14 +2,13 @@
 # Copyright (C) 2020 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq2515x.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI bq2515x 500-mA Linear charger family
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
-  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The BQ2515x family is a highly integrated battery charge management IC that
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
index 92ec7ed25668..82f382a7ffb3 100644
--- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -2,13 +2,13 @@
 # Copyright (C) 2020 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq256xx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI bq256xx Switch Mode Buck Charger
 
 maintainers:
-  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The bq256xx devices are a family of highly-integrated battery charge
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
index bf823b615439..204c0147188f 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq25890.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
index 8367a1fd4057..b687b8bcd705 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -2,14 +2,13 @@
 # Copyright (C) 2020 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI BQ25980 Flash Charger
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
-  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
index 6af41da3e055..65fc6049efc1 100644
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/bq27xxx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI BQ27XXX fuel gauge family
 
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
index c863cfa67865..5af1e0beaf29 100644
--- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
+++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
@@ -36,6 +36,7 @@ properties:
 
   cm-poll-mode:
     description: polling mode
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0
     enum:
       - 0 # disabled
@@ -49,6 +50,7 @@ properties:
 
   cm-battery-stat:
     description: battery status
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 0 # battery always present
       - 1 # no battery
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
index 7153fd4ce55f..694bfdb5815c 100644
--- a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Motorola CPCAP PMIC battery
 
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
index cb6353683d7b..7e6bf30a0107 100644
--- a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Motorola CPCAP PMIC charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index c73abb2ff513..dc697b6147b2 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -14,6 +14,9 @@ description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
+allOf:
+  - $ref: power-supply.yaml#
+
 properties:
   compatible:
     const: cellwise,cw2015
@@ -37,9 +40,6 @@ properties:
     minimum: 250
 
   power-supplies:
-    description:
-      Specifies supplies used for charging the battery connected to this gauge
-    $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8 # Should be enough
 
@@ -78,4 +78,3 @@ examples:
            power-supplies = <&mains_charger>, <&usb_charger>;
        };
     };
-
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
index 96336b05d76d..b289388952bf 100644
--- a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Dialog Semiconductor DA9150 Charger Power Supply bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
index 30c2fff7cf92..d47caf59d204 100644
--- a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
index 76c227a7cd5c..46527038bf22 100644
--- a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019-2020 Artur Rojek
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Ingenic JZ47xx battery bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
index 4c91da70011d..7e3449ed70d4 100644
--- a/Documentation/devicetree/bindings/power/supply/isp1704.yaml
+++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/isp1704.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for NXP ISP1704 USB Charger Detection
 
diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
index 518eabb63588..a99d989f1450 100644
--- a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: LEGO MINDSTORMS EV3 Battery
 
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
index e2d8d2aebb73..76cedf95a12c 100644
--- a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices LT3651 Charger Power Supply bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
index 043bf378040f..109b41a0d56c 100644
--- a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
 
diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
index 6d7aa97a6475..cfffaeef8b09 100644
--- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020 Topic Embedded Products
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Linear Technology (Analog Devices) LTC4162-L Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
index 818647edf63d..c838efcf7e16 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Maxim DS2760 DT bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 000000000000..4d3a1d09036f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-charger
+      - maxim,max77836-charger
+
+  maxim,constant-uvolt:
+    description:
+      Battery Constant Voltage in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4350000
+
+  maxim,eoc-uamp:
+    description: |
+      Current in uA for End-Of-Charge mode.
+      MAX14577: 50000-20000
+      MAX77836: 5000-100000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,fast-charge-uamp:
+    description: |
+      Current in uA for Fast Charge
+      MAX14577: 90000-950000
+      MAX77836: 45000-475000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,ovp-uvolt:
+    description:
+      OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+      asserts and charging stops.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+  - compatible
+  - maxim,constant-uvolt
+  - maxim,eoc-uamp
+  - maxim,fast-charge-uamp
+  - maxim,ovp-uvolt
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-charger
+    then:
+      properties:
+        maxim,eoc-uamp:
+          minimum: 50000
+          maximum: 200000
+        maxim,fast-charge-uamp:
+          minimum: 90000
+          maximum: 950000
+    else:
+      # max77836
+      properties:
+        maxim,eoc-uamp:
+          minimum: 5000
+          maximum: 100000
+        maxim,fast-charge-uamp:
+          minimum: 45000
+          maximum: 475000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
index 0a41078ebd99..070ef6f96e60 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Maxim MAX14656 DT bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
index ffb344987a7b..3a529326ecbd 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Maxim 17040 fuel gauge series
 
@@ -44,7 +44,9 @@ properties:
       SoC == State of Charge == Capacity.
 
   maxim,rcomp:
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 2
     description: |
       A value to compensate readings for various battery chemistries and operating temperatures.
       max17040,41 have 2 byte rcomp, default to 0x97 0x00.
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
index 971b53c58cc6..aff5d0792e0f 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Maxim 17042 fuel gauge series
 
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 000000000000..f5fd53debbc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-charger
+
+  maxim,constant-microvolt:
+    description: |
+      Battery constant voltage in uV. The charger will operate in fast
+      charge constant current mode till battery voltage reaches this level.
+      Then the charger will switch to fast charge constant voltage mode.
+      Also vsys (system voltage) will be set to this value when DC power is
+      supplied but charger is not enabled.
+      Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    minimum: 3650000
+    maximum: 4400000
+    default: 4200000
+
+  maxim,min-system-microvolt:
+    description: |
+      Minimal system voltage in uV.
+    enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+           3600000, 3700000]
+    default: 3600000
+
+  maxim,thermal-regulation-celsius:
+    description: |
+      Temperature in Celsius for entering high temperature charging mode.
+      If die temperature exceeds this value the charging current will be
+      reduced by 105 mA/Celsius.
+    enum: [70, 85, 100, 115]
+    default: 100
+
+  maxim,battery-overcurrent-microamp:
+    description: |
+      Overcurrent protection threshold in uA (current from battery to
+      system).
+      Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    minimum: 2000000
+    maximum: 3500000
+    default: 3500000
+
+  maxim,charge-input-threshold-microvolt:
+    description: |
+      Threshold voltage in uV for triggering input voltage regulation loop.
+      If input voltage decreases below this value, the input current will
+      be reduced to reach the threshold voltage.
+    enum: [4300000, 4700000, 4800000, 4900000]
+    default: 4300000
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
index 675b9b26d233..f23dcc50793e 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Maxim Integrated MAX77976 Battery charger
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 description: |
   The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
index 4828ca0842ae..a8d625f285f1 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Maxim Semiconductor MAX8903 Battery Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 000000000000..fd491c598a00
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Battery Charger
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-charger
+
+  interrupts:
+    description: |
+      Specify what irqs are needed to be handled by MT6370 Charger driver.
+      We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
+      is plugged in, and then the driver will enable BC1.2 detection.
+      After the hardware of MT6370 completes the BC1.2 detection,
+      IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
+      the result of BC1.2 detection.
+      When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
+      hardware enters the "Minimum Input Voltage Regulation loop" and
+      a workaround needs to be applied at this time.
+      In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
+      "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
+    items:
+      - description: irq of "USB is plugged in"
+      - description: irq of "BC1.2 is done"
+      - description: irq of "Minimum Input Voltage Regulation loop is active"
+
+  interrupt-names:
+    items:
+      - const: uvp_d_evt
+      - const: attach_i
+      - const: mivr
+
+  io-channels:
+    description: |
+      Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+    minItems: 1
+    items:
+      - description: |
+          VBUS voltage with lower accuracy (+-75mV) but higher measure
+          range (1~22V)
+      - description: |
+          VBUS voltage with higher accuracy (+-30mV) but lower measure
+          range (1~9.76V)
+      - description: the main system input voltage
+      - description: battery voltage
+      - description: battery temperature-sense input voltage
+      - description: IBUS current (required)
+      - description: battery current
+      - description: |
+          regulated output voltage to supply for the PWM low-side gate driver
+          and the bootstrap capacitor
+      - description: IC junction temperature
+
+  io-channel-names:
+    minItems: 1
+    items:
+      - const: vbusdiv5
+      - const: vbusdiv2
+      - const: vsys
+      - const: vbat
+      - const: ts_bat
+      - const: ibus
+      - const: ibat
+      - const: chg_vddp
+      - const: temp_jc
+
+  usb-otg-vbus-regulator:
+    type: object
+    description: OTG boost regulator.
+    unevaluatedProperties: false
+    $ref: /schemas/regulator/regulator.yaml#
+
+    properties:
+      enable-gpios:
+        maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - io-channels
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
index 4a1489f2b28d..5178e6207271 100644
--- a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Nokia N900 battery
 
diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
index 0bd7bf3b8e1b..dd89e2532a07 100644
--- a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/olpc-battery.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: OLPC Battery
 
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
index 259760167759..2f672e6e8d72 100644
--- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/power-supply.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Power Supply Core Support
 
@@ -12,9 +12,10 @@ maintainers:
 properties:
   power-supplies:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       This property is added to a supply in order to list the devices which
       supply it power, referenced by their phandles.
 
 additionalProperties: true
-
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
index caeff68c66d5..cbac55d3cb92 100644
--- a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
@@ -117,11 +117,18 @@ properties:
       be done externally to fully comply with the JEITA safety guidelines if this flag
       is set.
 
+  usb-charge-current-limit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000
+    maximum: 2500000
+    description: |
+      Default USB charge current limit in uA.
+
   usb-otg-in-supply:
     description: Reference to the regulator supplying power to the USB_OTG_IN pin.
 
   otg-vbus:
-    type: object
+    $ref: /schemas/regulator/regulator.yaml#
     description: |
       This node defines a regulator used to control the direction of VBUS voltage.
       Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
index ae647d3355a2..756c16d1727d 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Richtek RT5033 PMIC Fuel Gauge
 
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index e1c233462f29..bce15101318e 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Binding for Richtek rt9455 battery charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
index 72e8f274c791..99f506d6b0a0 100644
--- a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -46,9 +46,7 @@ additionalProperties: false
 patternProperties:
   "^i2c@[1-4]$":
     type: object
-
-    allOf:
-      - $ref: /schemas/i2c/i2c-controller.yaml#
+    $ref: /schemas/i2c/i2c-controller.yaml#
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
index b62c2431f94e..eeb043f9bb4f 100644
--- a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Spreadtrum SC2731 PMICs battery charger binding
 
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
index e019cffd1f38..d90a838a1744 100644
--- a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
 
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
index 4b8a00cec39c..525abdfb3e2d 100644
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AB8500 Battery Temperature Monitor
 
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
index 6799224f7fb4..10bbdcfc87b6 100644
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AB8500 Charging Algorithm
 
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
index 9518eb7289d0..e33329b3af61 100644
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AB8500 Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
index 54ac42a9d354..6a724ca90e99 100644
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2021 Sebastian Reichel
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AB8500 Fuel Gauge
 
@@ -25,6 +25,11 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     deprecated: true
 
+  line-impedance-micro-ohms:
+    description: The line impedance between the battery and the
+      AB8500 inputs, to compensate for this when determining internal
+      resistance.
+
   interrupts:
     maxItems: 5
 
diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
index 20862cdfc116..2d552becbfe6 100644
--- a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Battery charger driver for SMB345, SMB347 and SMB358
 
@@ -82,7 +82,7 @@ properties:
       - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
 
   usb-vbus:
-    $ref: "../../regulator/regulator.yaml#"
+    $ref: /schemas/regulator/regulator.yaml#
     type: object
 
     properties:
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
index a23f6653f332..93654e732cda 100644
--- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -87,4 +87,3 @@ examples:
         };
       };
     };
-
diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
index f2dd38bf078c..586745426341 100644
--- a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TPS65090 Frontend PMU with Switchmode Charger
 
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
index a33408c3a407..7ccf0cdffd3e 100644
--- a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TPS65217 Charger
 
@@ -24,7 +24,7 @@ properties:
     items:
       - const: USB
       - const: AC
-      
+
 required:
   - compatible
   - interrupts
diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
index fe3f32a0ea79..d8d3154f9cb1 100644
--- a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TWL4030 BCI (Battery Charger Interface)
 
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
index de6a23aee977..5c8369fd3ef7 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AXP20x AC power-supply
 
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
index d055428ae39f..e0b95ecbbebd 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AXP20x Battery power-supply
 
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
index 0c371b55c9e1..3ce648dd91bd 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AXP20x USB power-supply
 
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt b/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
deleted file mode 100644
index 781955f5217d..000000000000
--- a/Documentation/devicetree/bindings/powerpc/fsl/cache_sram.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Freescale PQ3 and QorIQ based Cache SRAM
-
-Freescale's mpc85xx and some QorIQ platforms provide an
-option of configuring a part of (or full) cache memory
-as SRAM. This cache SRAM representation in the device
-tree should be done as under:-
-
-Required properties:
-
-- compatible : should be "fsl,p2020-cache-sram"
-- fsl,cache-sram-ctlr-handle : points to the L2 controller
-- reg : offset and length of the cache-sram.
-
-Example:
-
-cache-sram@fff00000 {
-	fsl,cache-sram-ctlr-handle = <&L2>;
-	reg = <0 0xfff00000 0 0x10000>;
-	compatible = "fsl,p2020-cache-sram";
-};
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
index d63ab1dec16d..801c66069121 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -5,7 +5,7 @@ Copyright 2013 Freescale Semiconductor Inc.
 Power Architecture CPUs in Freescale SOCs are represented in device trees as
 per the definition in the Devicetree Specification.
 
-In addition to the the Devicetree Specification definitions, the properties
+In addition to the Devicetree Specification definitions, the properties
 defined below may be present on CPU nodes.
 
 PROPERTIES
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
index 8a70696395a7..22ad012660e9 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
@@ -6,12 +6,6 @@ The cache bindings explained below are Devicetree Specification compliant
 Required Properties:
 
 - compatible	: Should include one of the following:
-		  "fsl,8540-l2-cache-controller"
-		  "fsl,8541-l2-cache-controller"
-		  "fsl,8544-l2-cache-controller"
-		  "fsl,8548-l2-cache-controller"
-		  "fsl,8555-l2-cache-controller"
-		  "fsl,8568-l2-cache-controller"
 		  "fsl,b4420-l2-cache-controller"
 		  "fsl,b4860-l2-cache-controller"
 		  "fsl,bsc9131-l2-cache-controller"
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
index d096cf461d81..4571c857dbe5 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpc5200.txt
@@ -172,7 +172,7 @@ Interrupt controller (fsl,mpc5200-pic) node
 The mpc5200 pic binding splits hardware IRQ numbers into two levels.  The
 split reflects the layout of the PIC hardware itself, which groups
 interrupts into one of three groups; CRIT, MAIN or PERP.  Also, the
-Bestcomm dma engine has it's own set of interrupt sources which are
+Bestcomm dma engine has its own set of interrupt sources which are
 cascaded off of peripheral interrupt 0, which the driver interprets as a
 fourth group, SDMA.
 
diff --git a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
index 9d619e955576..d6658d3dd15e 100644
--- a/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
+++ b/Documentation/devicetree/bindings/powerpc/opal/power-mgt.txt
@@ -39,7 +39,7 @@ otherwise. The length of all the property arrays must be the same.
 
 - ibm,cpu-idle-state-flags:
 	Array of unsigned 32-bit values containing the values of the
-	flags associated with the the aforementioned idle-states. The
+	flags associated with the aforementioned idle-states. The
 	flag bits are as follows:
 		0x00000001 /* Decrementer would stop */
 		0x00000002 /* Needs timebase restore */
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
index 9bc664f414a1..51381e4cbb1f 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
+++ b/Documentation/devicetree/bindings/ptp/ptp-idt82p33.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ptp/ptp-idt82p33.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IDT 82P33 PTP Clock Device Tree Bindings
+title: IDT 82P33 PTP Clock
 
 description: |
   IDT 82P33XXX Synchronization Management Unit (SMU) based PTP clock
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
index 658cec67743e..7cf32663c806 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ptp/ptp-idtcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IDT ClockMatrix (TM) PTP Clock Device Tree Bindings
+title: IDT ClockMatrix (TM) PTP Clock
 
 maintainers:
   - Vincent Cheng <vincent.cheng.xh@renesas.com>
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 800d511502c4..4cc3cc7c50be 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 PWM Device Tree Bindings
+title: Allwinner A10 PWM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -52,33 +52,36 @@ properties:
   resets:
     maxItems: 1
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: allwinner,sun50i-h6-pwm
 
-then:
-  properties:
-    clocks:
-      maxItems: 2
+allOf:
+  - $ref: pwm.yaml#
 
-    clock-names:
-      items:
-        - const: mod
-        - const: bus
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-pwm
 
-  required:
-    - clock-names
-    - resets
+    then:
+      properties:
+        clocks:
+          maxItems: 2
 
-else:
-  properties:
-    clocks:
-      maxItems: 1
+        clock-names:
+          items:
+            - const: mod
+            - const: bus
+
+      required:
+        - clock-names
+        - resets
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
 
 required:
-  - "#pwm-cells"
   - compatible
   - reg
   - clocks
diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
new file mode 100644
index 000000000000..ab45df80345d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/atmel,at91sam-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip PWM controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+allOf:
+  - $ref: "pwm.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9rl-pwm
+              - atmel,sama5d3-pwm
+              - atmel,sama5d2-pwm
+              - microchip,sam9x60-pwm
+      - items:
+          - const: microchip,sama7g5-pwm
+          - const: atmel,sama5d2-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwm0: pwm@f8034000 {
+        compatible = "atmel,at91sam9rl-pwm";
+        reg = <0xf8034000 0x400>;
+        #pwm-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
deleted file mode 100644
index fbb5325be1f0..000000000000
--- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Atmel PWM controller
-
-Required properties:
-  - compatible: should be one of:
-    - "atmel,at91sam9rl-pwm"
-    - "atmel,sama5d3-pwm"
-    - "atmel,sama5d2-pwm"
-    - "microchip,sam9x60-pwm"
-  - reg: physical base address and length of the controller's registers
-  - #pwm-cells: Should be 3. See pwm.yaml in this directory for a
-    description of the cells format.
-
-Example:
-
-	pwm0: pwm@f8034000 {
-		compatible = "atmel,at91sam9rl-pwm";
-		reg = <0xf8034000 0x400>;
-		#pwm-cells = <3>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		d1 {
-			label = "d1";
-			pwms = <&pwm0 3 5000 0>
-			max-brightness = <255>;
-		};
-
-		d2 {
-			label = "d2";
-			pwms = <&pwm0 1 5000 1>
-			max-brightness = <255>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt
deleted file mode 100644
index 0e662d7f6bd1..000000000000
--- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
-
-Required properties:
-
-- compatible: must be "brcm,bcm7038-pwm"
-- reg: physical base address and length for this controller
-- #pwm-cells: should be 2. See pwm.yaml in this directory for a description
-  of the cells format
-- clocks: a phandle to the reference clock for this block which is fed through
-  its internal variable clock frequency generator
-
-
-Example:
-
-	pwm: pwm@f0408000 {
-		compatible = "brcm,bcm7038-pwm";
-		reg = <0xf0408000 0x28>;
-		#pwm-cells = <2>;
-		clocks = <&upg_fixed>;
-	};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
new file mode 100644
index 000000000000..119de3d7f9dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm: pwm@f0408000 {
+       compatible = "brcm,bcm7038-pwm";
+       reg = <0xf0408000 0x28>;
+       #pwm-cells = <2>;
+       clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/clk-pwm.yaml b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
new file mode 100644
index 000000000000..ec1768291503
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock based PWM controller
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description: |
+  Some systems have clocks that can be exposed to external devices.
+  (e.g. by muxing them to GPIO pins)
+  It's often possible to control duty-cycle of such clocks which makes them
+  suitable for generating PWM signal.
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: clk-pwm
+
+  clocks:
+    description: Clock used to generate the signal.
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - clocks
+
+examples:
+  - |
+    pwm {
+      compatible = "clk-pwm";
+      #pwm-cells = <2>;
+      clocks = <&gcc 0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pwm_clk_flash_default>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
index 4cfbffd8414a..c8577bdf6c94 100644
--- a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml
@@ -16,9 +16,19 @@ description: |
   An EC PWM node should be only found as a sub-node of the EC node (see
   Documentation/devicetree/bindings/mfd/google,cros-ec.yaml).
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   compatible:
-    const: google,cros-ec-pwm
+    oneOf:
+      - description: PWM controlled using EC_PWM_TYPE_GENERIC channels.
+        items:
+          - const: google,cros-ec-pwm
+      - description: PWM controlled using CROS_EC_PWM_DT_<...> types.
+        items:
+          - const: google,cros-ec-pwm-type
+
   "#pwm-cells":
     description: The cell specifies the PWM index.
     const: 1
@@ -39,7 +49,7 @@ examples:
             compatible = "google,cros-ec-spi";
             reg = <0>;
 
-            cros_ec_pwm: ec-pwm {
+            cros_ec_pwm: pwm {
                 compatible = "google,cros-ec-pwm";
                 #pwm-cells = <1>;
             };
diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
index 379d693889f6..b3da4e629341 100644
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml
@@ -9,6 +9,9 @@ title: Freescale i.MX PWM controller
 maintainers:
   - Philipp Zabel <p.zabel@pengutronix.de>
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   "#pwm-cells":
     description: |
@@ -59,7 +62,6 @@ properties:
     maxItems: 1
 
 required:
-  - "#pwm-cells"
   - compatible
   - reg
   - clocks
diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
index fe9ef42544f1..8bef9dfeba9a 100644
--- a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml
@@ -13,6 +13,9 @@ description: |
   The TPM counter and period counter are shared between multiple
   channels, so all channels should use same period setting.
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   "#pwm-cells":
     const: 3
@@ -34,7 +37,6 @@ properties:
     maxItems: 1
 
 required:
-  - "#pwm-cells"
   - compatible
   - reg
   - clocks
diff --git a/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
index ff6880a02ce6..5b18a5913ed1 100644
--- a/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/pwm/intel,keembay-pwm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay PWM Device Tree Bindings
+title: Intel Keem Bay PWM
 
 maintainers:
   - Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
@@ -31,7 +31,6 @@ required:
   - compatible
   - reg
   - clocks
-  - '#pwm-cells'
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
index 11a606536169..59d7c4d864c1 100644
--- a/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml
@@ -9,6 +9,9 @@ title: LGM SoC PWM fan controller
 maintainers:
   - Rahul Tanwar <rtanwar@maxlinear.com>
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   compatible:
     const: intel,lgm-pwm
diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
index 1d7c27be50da..0a46af240d83 100644
--- a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml
@@ -15,6 +15,9 @@ description: |
   Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as
   well as an example.
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   compatible:
     enum:
@@ -25,7 +28,6 @@ properties:
 
 required:
   - compatible
-  - "#pwm-cells"
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
new file mode 100644
index 000000000000..0088bc8e7c54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DISP_PWM Controller
+
+maintainers:
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-pwm
+          - mediatek,mt6595-disp-pwm
+          - mediatek,mt8173-disp-pwm
+          - mediatek,mt8183-disp-pwm
+      - items:
+          - const: mediatek,mt8167-disp-pwm
+          - const: mediatek,mt8173-disp-pwm
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-pwm
+              - mediatek,mt8188-disp-pwm
+              - mediatek,mt8192-disp-pwm
+              - mediatek,mt8195-disp-pwm
+          - const: mediatek,mt8183-disp-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main Clock
+      - description: Mm Clock
+
+  clock-names:
+    items:
+      - const: main
+      - const: mm
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm0: pwm@1401e000 {
+        compatible = "mediatek,mt8173-disp-pwm";
+        reg = <0x1401e000 0x1000>;
+        #pwm-cells = <2>;
+        clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+                 <&mmsys CLK_MM_DISP_PWM0MM>;
+        clock-names = "main", "mm";
+    };
diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
new file mode 100644
index 000000000000..a7fae1772a81
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip IP corePWM controller bindings
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  corePWM is an 16 channel pulse width modulator FPGA IP
+
+  https://www.microsemi.com/existing-parts/parts/152118
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: microchip,corepwm-rtl-v4
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+  microchip,sync-update-mask:
+    description: |
+      Depending on how the IP is instantiated, there are two modes of operation.
+      In synchronous mode, all channels are updated at the beginning of the PWM period,
+      and in asynchronous mode updates happen as the control registers are written.
+      A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous
+      mode is possible for each channel, and is set by the bitstream programmed to the
+      FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that
+      control the duty cycle for channel x have a second "shadow"/buffer reg synthesised.
+      At runtime a bit wide register exposed to APB can be used to toggle on/off
+      synchronised mode for all channels it has been synthesised for.
+      Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents
+      whether synchronous mode is possible for the PWM channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  microchip,dac-mode-mask:
+    description: |
+      Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates
+      a minimum period pulse train whose High/Low average is that of the chosen duty
+      cycle. This "DAC" will have far better bandwidth and ripple performance than the
+      standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP
+      core, set at instantiation and by the bitstream programmed to the FPGA, determines
+      whether a given channel operates in regular PWM or DAC mode.
+      Each bit corresponds to a PWM channel & represents whether DAC mode is enabled
+      for that channel.
+
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm@41000000 {
+      compatible = "microchip,corepwm-rtl-v4";
+      microchip,sync-update-mask = /bits/ 32 <0>;
+      clocks = <&clkcfg 30>;
+      reg = <0x41000000 0xF0>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
index 8740e076061e..a34cbc13f691 100644
--- a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Shawn Guo <shawnguo@kernel.org>
   - Anson Huang <anson.huang@nxp.com>
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   compatible:
     enum:
@@ -28,7 +31,6 @@ properties:
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - fsl,pwm-number
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
index 25ed214473d7..554c96b6d0c3 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -3,11 +3,14 @@ MediaTek PWM controller
 Required properties:
  - compatible: should be "mediatek,<name>-pwm":
    - "mediatek,mt2712-pwm": found on mt2712 SoC.
+   - "mediatek,mt6795-pwm": found on mt6795 SoC.
    - "mediatek,mt7622-pwm": found on mt7622 SoC.
    - "mediatek,mt7623-pwm": found on mt7623 SoC.
    - "mediatek,mt7628-pwm": found on mt7628 SoC.
    - "mediatek,mt7629-pwm": found on mt7629 SoC.
    - "mediatek,mt8183-pwm": found on mt8183 SoC.
+   - "mediatek,mt8195-pwm", "mediatek,mt8183-pwm": found on mt8195 SoC.
+   - "mediatek,mt8365-pwm": found on mt8365 SoC.
    - "mediatek,mt8516-pwm": found on mt8516 SoC.
  - reg: physical base address and length of the controller's registers.
  - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
@@ -17,6 +20,7 @@ Required properties:
                 has no clocks
    - "top": the top clock generator
    - "main": clock used by the PWM core
+   - "pwm1-3": the three per PWM clocks for mt8365
    - "pwm1-8": the eight per PWM clocks for mt2712
    - "pwm1-6": the six per PWM clocks for mt7622
    - "pwm1-5": the five per PWM clocks for mt7623
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
deleted file mode 100644
index 902b271891ae..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-MediaTek display PWM controller
-
-Required properties:
- - compatible: should be "mediatek,<name>-disp-pwm":
-   - "mediatek,mt2701-disp-pwm": found on mt2701 SoC.
-   - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
-   - "mediatek,mt8167-disp-pwm", "mediatek,mt8173-disp-pwm": found on mt8167 SoC.
-   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
- - reg: physical base address and length of the controller's registers.
- - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
-   the cell format.
- - clocks: phandle and clock specifier of the PWM reference clock.
- - clock-names: must contain the following:
-   - "main": clock used to generate PWM signals.
-   - "mm": sync signals from the modules of mmsys.
- - pinctrl-names: Must contain a "default" entry.
- - pinctrl-0: One property must exist for each entry in pinctrl-names.
-   See pinctrl/pinctrl-bindings.txt for details of the property values.
-
-Example:
-	pwm0: pwm@1401e000 {
-		compatible = "mediatek,mt8173-disp-pwm",
-			     "mediatek,mt6595-disp-pwm";
-		reg = <0 0x1401e000 0 0x1000>;
-		#pwm-cells = <2>;
-		clocks = <&mmsys CLK_MM_DISP_PWM026M>,
-			 <&mmsys CLK_MM_DISP_PWM0MM>;
-		clock-names = "main", "mm";
-		pinctrl-names = "default";
-		pinctrl-0 = <&disp_pwm0_pins>;
-	};
-
-	backlight_lcd: backlight_lcd {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 1000000>;
-		brightness-levels = <
-			  0  16  32  48  64  80  96 112
-			128 144 160 176 192 208 224 240
-			255
-		>;
-		default-brightness-level = <9>;
-		power-supply = <&mt6397_vio18_reg>;
-		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
index d722ae3be363..25ecfe14c698 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 - compatible: Shall contain "ti,omap-dmtimer-pwm".
-- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer.txt for info
+- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info
   about these timers.
 - #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
   the cells format.
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
index 81a54a4e8e3e..f2d1dc7e7b3f 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
@@ -21,6 +21,7 @@ properties:
           - const: rockchip,rk2928-pwm
       - items:
           - enum:
+              - rockchip,rk3128-pwm
               - rockchip,rk3368-pwm
               - rockchip,rk3399-pwm
               - rockchip,rv1108-pwm
@@ -30,6 +31,7 @@ properties:
               - rockchip,px30-pwm
               - rockchip,rk3308-pwm
               - rockchip,rk3568-pwm
+              - rockchip,rk3588-pwm
           - const: rockchip,rk3328-pwm
 
   reg:
@@ -51,42 +53,44 @@ properties:
 required:
   - compatible
   - reg
-  - "#pwm-cells"
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - rockchip,rk3328-pwm
-          - rockchip,rv1108-pwm
-
-then:
-  properties:
-    clocks:
-      items:
-        - description: Used to derive the functional clock for the device.
-        - description: Used as the APB bus clock.
-
-    clock-names:
-      items:
-        - const: pwm
-        - const: pclk
-
-  required:
-    - clocks
-    - clock-names
-
-else:
-  properties:
-    clocks:
-      maxItems: 1
-      description:
-        Used both to derive the functional clock
-        for the device and as the bus clock.
-
-  required:
-    - clocks
+
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3328-pwm
+              - rockchip,rv1108-pwm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Used to derive the functional clock for the device.
+            - description: Used as the APB bus clock.
+
+        clock-names:
+          items:
+            - const: pwm
+            - const: pclk
+
+      required:
+        - clocks
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+          description:
+            Used both to derive the functional clock
+            for the device and as the bus clock.
+
+      required:
+        - clocks
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
index 188679cb8b8c..fe603fb1b2cc 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml
@@ -86,7 +86,6 @@ required:
   - clocks
   - clock-names
   - compatible
-  - "#pwm-cells"
   - reg
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
index 84e66913d042..605c1766dba8 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml
@@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive PWM controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 
@@ -22,6 +21,9 @@ description:
 
   https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   compatible:
     items:
@@ -55,7 +57,6 @@ required:
   - compatible
   - reg
   - clocks
-  - "#pwm-cells"
   - interrupts
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
index ed35b6cc48d5..3840ae709bc6 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml
@@ -47,7 +47,6 @@ properties:
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - clocks
   - clock-names
 
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
index ee312cb210e6..70a8f766212e 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml
@@ -48,7 +48,6 @@ properties:
 required:
   - compatible
   - reg
-  - "#pwm-cells"
   - clocks
   - clock-names
 
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml
index 2effe6c0de6b..3c01f85029e5 100644
--- a/Documentation/devicetree/bindings/pwm/pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm.yaml
@@ -9,6 +9,8 @@ title: PWM controllers (providers)
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
+select: false
+
 properties:
   $nodename:
     pattern: "^pwm(@.*|-[0-9a-f])*$"
diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
index 7ea1070b4b3a..1c94acbc2b4a 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml
@@ -59,21 +59,23 @@ properties:
 required:
   - compatible
   - reg
-  - '#pwm-cells'
   - clocks
   - power-domains
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - renesas,pwm-r8a7778
-            - renesas,pwm-r8a7779
-then:
-  required:
-    - resets
+allOf:
+  - $ref: pwm.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,pwm-r8a7778
+                - renesas,pwm-r8a7779
+    then:
+      required:
+        - resets
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
index 1f5c6384182e..c6b2ab56b7fe 100644
--- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml
@@ -68,7 +68,6 @@ properties:
 required:
   - compatible
   - reg
-  - '#pwm-cells'
   - clocks
   - power-domains
 
diff --git a/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
new file mode 100644
index 000000000000..d4fc9e8db1d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/sunplus,sp7021-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoC SP7021 PWM Controller
+
+maintainers:
+  - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 2
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clocks
+
+examples:
+  - |
+    pwm: pwm@9c007a00 {
+      compatible = "sunplus,sp7021-pwm";
+      reg = <0x9c007a00 0x80>;
+      clocks = <&clkc 0xa2>;
+      #pwm-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
index d350f5edfb67..46622661e5fb 100644
--- a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
+++ b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
@@ -9,6 +9,9 @@ title: Toshiba Visconti PWM Controller
 maintainers:
   - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
 
+allOf:
+  - $ref: pwm.yaml#
+
 properties:
   compatible:
     items:
@@ -23,7 +26,6 @@ properties:
 required:
   - compatible
   - reg
-  - '#pwm-cells'
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index 24ace6e1e5ec..63e1161a87de 100644
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -83,6 +83,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description: |
       List of regulators provided by the device
 
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 9b131c6facbc..84eeaef179a5 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -18,23 +18,23 @@ description:
 
 allOf:
   - $ref: "regulator.yaml#"
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: regulator-fixed-clock
-  required:
-    - clocks
-else:
-  if:
-    properties:
-      compatible:
-        contains:
-          const: regulator-fixed-domain
-    required:
-      - power-domains
-      - required-opps
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: regulator-fixed-clock
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: regulator-fixed-domain
+    then:
+      required:
+        - power-domains
+        - required-opps
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index f7e3d8fd3bf3..6c3371d706bb 100644
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -85,6 +85,9 @@ properties:
       - current
     default: voltage
 
+  vin-supply:
+    description: Input supply phandle.
+
 required:
   - compatible
   - regulator-name
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
deleted file mode 100644
index b82943d83677..000000000000
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Binding for Maxim MAX77802 regulators
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional properties:
-- inb1-supply:  The input supply for BUCK1
-- inb2-supply:  The input supply for BUCK2
-- inb3-supply:  The input supply for BUCK3
-- inb4-supply:  The input supply for BUCK4
-- inb5-supply:  The input supply for BUCK5
-- inb6-supply:  The input supply for BUCK6
-- inb7-supply:  The input supply for BUCK7
-- inb8-supply:  The input supply for BUCK8
-- inb9-supply:  The input supply for BUCK9
-- inb10-supply: The input supply for BUCK10
-- inl1-supply:  The input supply for LDO8 and LDO15
-- inl2-supply:  The input supply for LDO17, LDO27, LDO30 and LDO35
-- inl3-supply:  The input supply for LDO3, LDO5, LDO6 and LDO7
-- inl4-supply:  The input supply for LDO10, LDO11, LDO13 and LDO14
-- inl5-supply:  The input supply for LDO9 and LDO19
-- inl6-supply:  The input supply for LDO4, LDO21, LDO24 and LDO33
-- inl7-supply:  The input supply for LDO18, LDO20, LDO28 and LDO29
-- inl9-supply:  The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
-- inl10-supply: The input supply for LDO1 and LDO2
-
-Optional nodes:
-- regulators : The regulators of max77802 have to be instantiated
-  under subnode named "regulators" using the following format.
-
-	regulator-name {
-		standard regulator constraints....
-	};
-	refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-The regulator node name should be initialized with a string to get matched
-with their hardware counterparts as follow. The valid names are:
-
-	-LDOn 	:	for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
-			and 32-35.
-			example: LDO1, LDO2, LDO35.
-	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 10.
-			example: BUCK1, BUCK5, BUCK10.
-
-The max77802 regulator supports two different operating modes: Normal and Low
-Power Mode. Some regulators support the modes to be changed at startup or by
-the consumers during normal operation while others only support to change the
-mode during system suspend. The standard regulator suspend states binding can
-be used to configure the regulator operating mode.
-
-The regulators that support the standard "regulator-initial-mode" property,
-changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
-
-The possible values for "regulator-initial-mode" and "regulator-mode" are:
-	1: Normal regulator voltage output mode.
-	3: Low Power which reduces the quiescent current down to only 1uA
-
-The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
-header and can be included by device tree source files.
-
-The standard "regulator-mode" property can only be used for regulators that
-support changing their mode to Low Power Mode during suspend. These regulators
-are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
-been enabled for the given suspend state using "regulator-on-in-suspend" and
-has not been disabled for that state using "regulator-off-in-suspend".
-
-Example:
-
-	max77802@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		inb1-supply = <&parent_reg>;
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-initial-mode = <MAX77802_OPMODE_LP>;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1900000>;
-				regulator-max-microvolt = <1900000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-mode = <MAX77802_OPMODE_LP>;
-				};
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
new file mode 100644
index 000000000000..285dc7122977
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-regulator
+      - maxim,max77836-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microvolt: false
+      regulator-max-microvolt: false
+
+  SAFEOUT:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Safeout LDO regulator (fixed voltage).
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        const: 4900000
+      regulator-max-microvolt:
+        const: 4900000
+
+patternProperties:
+  "^LDO[12]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        minimum: 800000
+      regulator-max-microvolt:
+        maximum: 3950000
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-regulator
+    then:
+      properties:
+        LDO1: false
+        LDO2: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
index bb64b679f765..0e7cd4b3ace0 100644
--- a/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77686.yaml
@@ -8,7 +8,7 @@ title: Maxim MAX77686 Power Management IC regulators
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for Maxim MAX77686 Power Management
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml
new file mode 100644
index 000000000000..945a539749e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microamp:
+        minimum: 60000
+      regulator-max-microamp:
+        maximum: 2580000
+
+    required:
+      - regulator-name
+
+patternProperties:
+  "^ESAFEOUT[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Safeout LDO regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 3300000
+      regulator-max-microvolt:
+        maximum: 4950000
+
+    required:
+      - regulator-name
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
new file mode 100644
index 000000000000..71138c611b6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC regulators
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
+  regulators.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
+  additional information and example.
+
+  Certain regulators support "regulator-initial-mode" and "regulator-mode".
+  The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
+  and their meaning is::
+    1 - Normal regulator voltage output mode.
+    3 - Low Power which reduces the quiescent current down to only 1uA
+
+  The standard "regulator-mode" property can only be used for regulators that
+  support changing their mode to Low Power Mode during suspend. These
+  regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
+  regulator has been enabled for the given suspend state using
+  "regulator-on-in-suspend" and has not been disabled for that state using
+  "regulator-off-in-suspend".
+
+patternProperties:
+  # LDO1, LDO3, LDO20, LDO21
+  "^LDO([13]|2[01])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      LDOs supporting the regulator-initial-mode property and changing their
+      mode during normal operation.
+
+  # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
+  "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      LDOs supporting the regulator-mode property (changing mode to Low Power
+      Mode during suspend).
+
+    properties:
+      regulator-initial-mode: false
+
+  # buck2-4
+  "^BUCK[2-4]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      bucks supporting the regulator-mode property (changing mode to Low Power
+      Mode during suspend).
+
+    properties:
+      regulator-initial-mode: false
+
+  # buck1, buck5-10
+  "^BUCK([15-9]|10)$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      regulator-initial-mode: false
+
+    patternProperties:
+      regulator-state-(standby|mem|disk):
+        type: object
+        additionalProperties: true
+        properties:
+          regulator-mode: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
new file mode 100644
index 000000000000..9695e7242882
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated
+  Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microamp:
+        minimum: 100000
+      regulator-max-microamp:
+        maximum: 3150000
+
+    required:
+      - regulator-name
+
+patternProperties:
+  "^SAFEOUT[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Safeout LDO regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 3300000
+      regulator-max-microvolt:
+        maximum: 4950000
+
+    required:
+      - regulator-name
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
index e4e8c58f6046..3ff0d7d980e9 100644
--- a/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8952.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Maxim MAX8952 voltage regulator
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 allOf:
   - $ref: regulator.yaml#
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
index 35c53e27f78c..b92eef68c19f 100644
--- a/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8973.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Maxim MAX8973/MAX77621 voltage regulator
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 allOf:
   - $ref: regulator.yaml#
@@ -113,7 +113,7 @@ examples:
     };
 
   - |
-    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
@@ -123,8 +123,7 @@ examples:
         regulator@1b {
             compatible = "maxim,max77621";
             reg = <0x1b>;
-            interrupt-parent = <&gpio>;
-            interrupts = <TEGRA_GPIO(Y, 1) IRQ_TYPE_LEVEL_LOW>;
+            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 
             regulator-always-on;
             regulator-boot-on;
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
index d5a44ca3df04..2b266ea43716 100644
--- a/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
+++ b/Documentation/devicetree/bindings/regulator/maxim,max8997.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Maxim MAX8997 Power Management IC
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Maxim MAX8997 is a Power Management IC which includes voltage and current
@@ -111,6 +111,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description:
       List of child nodes that specify the regulators.
 
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
new file mode 100644
index 000000000000..771cc134393c
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6331-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6331 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6331 PMIC provides 6 BUCK and 21 LDO (Low Dropout) regulators
+  and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6331 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(avdd32aud|auxa32)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(avdd32aud|auxa32)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vcam(a|af|d|io)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vcam(a|af|d|io)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-vtcxo[12]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vtcxo[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+  "^ldo-vgp[1234]$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^vgp[12]$"
+
+    required:
+      - regulator-name
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6331_vdvfs11_reg: buck-vdvfs11 {
+          regulator-name = "vdvfs11";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs12_reg: buck-vdvfs12 {
+          regulator-name = "vdvfs12";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs13_reg: buck-vdvfs13 {
+          regulator-name = "vdvfs13";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vdvfs14_reg: buck-vdvfs14 {
+          regulator-name = "vdvfs14";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vcore2_reg: buck-vcore2 {
+          regulator-name = "vcore2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vio18_reg: buck-vio18 {
+          regulator-name = "vio18";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <0>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6331_vtcxo1_reg: ldo-vtcxo1 {
+          regulator-name = "vtcxo1";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vtcxo2_reg: ldo-vtcxo2 {
+          regulator-name = "vtcxo2";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_avdd32_aud_reg: ldo-avdd32aud {
+          regulator-name = "avdd32_aud";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vauxa32_reg: ldo-vauxa32 {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6331_vcama_reg: ldo-vcama {
+          regulator-name = "vcama";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vio28_reg: ldo-vio28 {
+          regulator-name = "vio28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vcamaf_reg: ldo-vcamaf {
+          regulator-name = "vcam_af";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmc_reg: ldo-vmc {
+          regulator-name = "vmc";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vmch_reg: ldo-vmch {
+          regulator-name = "vmch";
+          regulator-min-microvolt = <3000000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vemc33_reg: ldo-vemc33 {
+          regulator-name = "vemc33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp1_reg: ldo-vgp1 {
+          regulator-name = "vgp1";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vsim1_reg: ldo-vsim1 {
+          regulator-name = "vsim1";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vsim2_reg: ldo-vsim2 {
+          regulator-name = "vsim2";
+          regulator-min-microvolt = <1700000>;
+          regulator-max-microvolt = <3100000>;
+        };
+        mt6331_vmipi_reg: ldo-vmipi {
+          regulator-name = "vmipi";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vibr_reg: ldo-vibr {
+          regulator-name = "vibr";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <3300000>;
+        };
+        mt6331_vgp4_reg: ldo-vgp4 {
+          regulator-name = "vgp4";
+          regulator-min-microvolt = <1600000>;
+          regulator-max-microvolt = <2200000>;
+        };
+        mt6331_vcamd_reg: ldo-vcamd {
+          regulator-name = "vcamd";
+          regulator-min-microvolt = <900000>;
+          regulator-max-microvolt = <1500000>;
+        };
+        mt6331_vusb10_reg: ldo-vusb10 {
+          regulator-name = "vusb";
+          regulator-min-microvolt = <1000000>;
+          regulator-max-microvolt = <1300000>;
+          regulator-boot-on;
+        };
+        mt6331_vcamio_reg: ldo-vcamio {
+          regulator-name = "vcam_io";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vsram_reg: ldo-vsram {
+          regulator-name = "vsram";
+          regulator-min-microvolt = <1012500>;
+          regulator-max-microvolt = <1012500>;
+          regulator-always-on;
+          regulator-boot-on;
+        };
+        mt6331_vgp2_reg: ldo-vgp2 {
+          regulator-name = "vgp2";
+          regulator-min-microvolt = <1100000>;
+          regulator-max-microvolt = <1500000>;
+          regulator-boot-on;
+        };
+        mt6331_vgp3_reg: ldo-vgp3 {
+          regulator-name = "vgp3";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+        };
+        mt6331_vrtc_reg: ldo-vrtc {
+          regulator-name = "vrtc";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+          regulator-always-on;
+        };
+        mt6331_vdig18_reg: ldo-vdig18 {
+          regulator-name = "dvdd18_dig";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <1800000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
new file mode 100644
index 000000000000..3218f43e6957
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mediatek,mt6332-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6332 Regulator from MediaTek Integrated
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The MT6332 Companion PMIC provides 6 BUCK and 4 LDO (Low Dropout)
+  regulators and nodes are named according to the regulator type:
+  buck-<name> and ldo-<name>.
+  MT6332 regulators node should be sub node of the MT6397 MFD node.
+
+patternProperties:
+  "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(dram|dvfs2|pa|rf18a|rf18b|sbst)$"
+
+    unevaluatedProperties: false
+
+  "^ldo-v(bif28|dig18|sram|usb33)$":
+    type: object
+    $ref: "regulator.yaml#"
+
+    properties:
+      regulator-name:
+        pattern: "^v(bif28|dig18|sram|usb33)$"
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+      regulators {
+        mt6332_vdram_reg: buck-vdram {
+          regulator-name = "vdram";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-ramp-delay = <12500>;
+          regulator-allowed-modes = <0 1>;
+          regulator-always-on;
+        };
+        mt6332_vdvfs2_reg: buck-vdvfs2 {
+          regulator-name = "vdvfs2";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1312500>;
+          regulator-ramp-delay = <12500>;
+          regulator-enable-ramp-delay = <1>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vpa_reg: buck-vpa {
+          regulator-name = "vpa";
+          regulator-min-microvolt = <500000>;
+          regulator-max-microvolt = <3400000>;
+        };
+        mt6332_vrf18a_reg: buck-vrf18a {
+          regulator-name = "vrf18a";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vrf18b_reg: buck-vrf18b {
+          regulator-name = "vrf18b";
+          regulator-min-microvolt = <1050000>;
+          regulator-max-microvolt = <2240625>;
+          regulator-allowed-modes = <0 1>;
+        };
+        mt6332_vsbst_reg: buck-vsbst {
+          regulator-name = "vsbst";
+          regulator-min-microvolt = <3500000>;
+          regulator-max-microvolt = <7468750>;
+        };
+        mt6332_vauxb32_reg: ldo-vauxb32 {
+          regulator-name = "vauxb32";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <3200000>;
+        };
+        mt6332_vbif28_reg: ldo-vbif28 {
+          regulator-name = "vbif28";
+          regulator-min-microvolt = <2800000>;
+          regulator-max-microvolt = <2800000>;
+        };
+        mt6332_vdig18_reg: ldo-vdig18 {
+          regulator-name = "vdig18";
+          regulator-min-microvolt = <1200000>;
+          regulator-max-microvolt = <1800000>;
+          regulator-always-on;
+        };
+        mt6332_vsram_reg: ldo-vsram {
+          regulator-name = "vauxa32";
+          regulator-min-microvolt = <700000>;
+          regulator-max-microvolt = <1493750>;
+          regulator-always-on;
+        };
+        mt6332_vusb33_reg: ldo-vusb33 {
+          regulator-name = "vusb33";
+          regulator-min-microvolt = <3300000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 90727fdc1283..7023c597c3ed 100644
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -15,6 +15,7 @@ properties:
   compatible:
     enum:
       - mps,mp5416
+      - mps,mp5496
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 61dd5af80db6..364b58730be2 100644
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -29,9 +29,10 @@ properties:
       "^vbuck[1-4]$":
         type: object
         $ref: "regulator.yaml#"
+        unevaluatedProperties: false
 
         properties:
-          regulator-name:
+          regulator-compatible:
             pattern: "^vbuck[1-4]$"
 
     additionalProperties: false
@@ -55,7 +56,7 @@ examples:
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
 
         vbuck3 {
@@ -63,7 +64,7 @@ examples:
           regulator-min-microvolt = <300000>;
           regulator-max-microvolt = <1193750>;
           regulator-enable-ramp-delay = <256>;
-          regulator-allowed-modes = <0 1 2 4>;
+          regulator-allowed-modes = <0 1 2>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
index 9a90a92f2d7e..7034cdca54e0 100644
--- a/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mt6358-regulator.txt
@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
 
 The valid names for regulators are::
 BUCK:
-  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
-  buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
+  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
 LDO:
   ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
   ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
-  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
-  ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
+  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
+  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
+  ldo_vrf18, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28,
   ldo_vsim2
 
 Example:
@@ -354,5 +354,17 @@ Example:
 				regulator-max-microvolt = <3100000>;
 				regulator-enable-ramp-delay = <540>;
 			};
+
+			mt6358_vcore_sshub_reg: buck_vcore_sshub {
+				regulator-name = "vcore_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
+
+			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
+				regulator-name = "vsram_others_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index f70f2e758a00..835b53302db8 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000
@@ -92,6 +81,17 @@ properties:
       LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
       connected to a host GPIO.
 
+  nxp,i2c-lt-enable:
+    type: boolean
+    description:
+      Indicates that the I2C Level Translator is used.
+
+  nxp,wdog_b-warm-reset:
+    type: boolean
+    description:
+      When WDOG_B signal is asserted a warm reset will be done instead of cold
+      reset.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index f578e72778a7..a26bbd68b729 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -70,7 +70,11 @@ properties:
         $ref: "regulator.yaml#"
         type: object
 
-      "^(vsnvs|vref|vrefddr|swbst|coin)$":
+      "^vldo[1-4]$":
+        $ref: "regulator.yaml#"
+        type: object
+
+      "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
         $ref: "regulator.yaml#"
         type: object
 
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
deleted file mode 100644
index 3d78d507e29f..000000000000
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Bindings for the Generic PWM Regulator
-======================================
-
-Currently supports 2 modes of operation:
-
-Voltage Table:		When in this mode, a voltage table (See below) of
-			predefined voltage <=> duty-cycle values must be
-			provided via DT. Limitations are that the regulator can
-			only operate at the voltages supplied in the table.
-			Intermediary duty-cycle values which would normally
-			allow finer grained voltage selection are ignored and
-			rendered useless.  Although more control is given to
-			the user if the assumptions made in continuous-voltage
-			mode do not reign true.
-
-Continuous Voltage:	This mode uses the regulator's maximum and minimum
-			supplied voltages specified in the
-			regulator-{min,max}-microvolt properties to calculate
-			appropriate duty-cycle values.  This allows for a much
-			more fine grained solution when compared with
-			voltage-table mode above.  This solution does make an
-			assumption that a %50 duty-cycle value will cause the
-			regulator voltage to run at half way between the
-			supplied max_uV and min_uV values.
-
-Required properties:
---------------------
-- compatible:		Should be "pwm-regulator"
-
-- pwms:			PWM specification (See: ../pwm/pwm.txt)
-
-Only required for Voltage Table Mode:
-- voltage-table: 	Voltage and Duty-Cycle table consisting of 2 cells
-			    First cell is voltage in microvolts (uV)
-			    Second cell is duty-cycle in percent (%)
-
-Optional properties for Continuous mode:
-- pwm-dutycycle-unit:	Integer value encoding the duty cycle unit. If not
-			defined, <100> is assumed, meaning that
-			pwm-dutycycle-range contains values expressed in
-			percent.
-
-- pwm-dutycycle-range:	Should contain 2 entries. The first entry is encoding
-			the dutycycle for regulator-min-microvolt and the
-			second one the dutycycle for regulator-max-microvolt.
-			Duty cycle values are expressed in pwm-dutycycle-unit.
-			If not defined, <0 100> is assumed.
-
-NB: To be clear, if voltage-table is provided, then the device will be used
-in Voltage Table Mode.  If no voltage-table is provided, then the device will
-be used in Continuous Voltage Mode.
-
-Optional properties:
---------------------
-- enable-gpios:		GPIO to use to enable/disable the regulator
-
-Any property defined as part of the core regulator binding can also be used.
-(See: ../regulator/regulator.txt)
-
-Continuous Voltage With Enable GPIO Example:
-	pwm_regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm1 0 8448 0>;
-		enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-		regulator-min-microvolt = <1016000>;
-		regulator-max-microvolt = <1114000>;
-		regulator-name = "vdd_logic";
-		/* unit == per-mille */
-		pwm-dutycycle-unit = <1000>;
-		/*
-		 * Inverted PWM logic, and the duty cycle range is limited
-		 * to 30%-70%.
-		 */
-		pwm-dutycycle-range = <700 300>; /* */
-	};
-
-Voltage Table Example:
-	pwm_regulator {
-		compatible = "pwm-regulator";
-		pwms = <&pwm1 0 8448 0>;
-		regulator-min-microvolt = <1016000>;
-		regulator-max-microvolt = <1114000>;
-		regulator-name = "vdd_logic";
-
-			      /* Voltage Duty-Cycle */
-		voltage-table = <1114000 0>,
-				<1095000 10>,
-				<1076000 20>,
-				<1056000 30>,
-				<1036000 40>,
-				<1016000 50>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
new file mode 100644
index 000000000000..82b6f2fde422
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/pwm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for the Generic PWM Regulator
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+  - Lee Jones <lee@kernel.org>
+  - Alexandre Courbot <acourbot@nvidia.com>
+
+description: |
+  Currently supports 2 modes of operation:
+
+  Voltage Table:
+    When in this mode, a voltage table (See below) of predefined voltage <=>
+    duty-cycle values must be provided via DT. Limitations are that the
+    regulator can only operate at the voltages supplied in the table.
+    Intermediary duty-cycle values which would normally allow finer grained
+    voltage selection are ignored and rendered useless.  Although more control
+    is given to the user if the assumptions made in continuous-voltage mode do
+    not reign true.
+
+  Continuous Voltage:
+    This mode uses the regulator's maximum and minimum supplied voltages
+    specified in the regulator-{min,max}-microvolt properties to calculate
+    appropriate duty-cycle values.  This allows for a much more fine grained
+    solution when compared with voltage-table mode above.  This solution does
+    make an assumption that a %50 duty-cycle value will cause the regulator
+    voltage to run at half way between the supplied max_uV and min_uV values.
+
+  If voltage-table is provided, then the device will be used in Voltage Table
+  Mode.  If no voltage-table is provided, then the device will be used in
+  Continuous Voltage Mode.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: pwm-regulator
+
+  pwms:
+    maxItems: 1
+
+  voltage-table:
+    description: Voltage and Duty-Cycle table.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: voltage in microvolts (uV)
+        - description: duty-cycle in percent (%)
+
+  enable-gpios:
+    description: Regulator enable GPIO
+    maxItems: 1
+
+   # Optional properties for Continuous mode:
+  pwm-dutycycle-unit:
+    description:
+      Integer value encoding the duty cycle unit. If not
+        defined, <100> is assumed, meaning that
+        pwm-dutycycle-range contains values expressed in
+        percent.
+    default: 100
+
+  pwm-dutycycle-range:
+    description:
+      Should contain 2 entries. The first entry is encoding
+        the dutycycle for regulator-min-microvolt and the
+        second one the dutycycle for regulator-max-microvolt.
+        Duty cycle values are expressed in pwm-dutycycle-unit.
+        If not defined, <0 100> is assumed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: the dutycycle for regulator-min-microvolt
+      - description: the dutycycle for regulator-max-microvolt
+    default: [ 0 100 ]
+
+required:
+  - compatible
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    // Continuous Voltage With Enable GPIO Example:
+    regulator {
+        compatible = "pwm-regulator";
+        pwms = <&pwm1 0 8448 0>;
+        enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+        regulator-min-microvolt = <1016000>;
+        regulator-max-microvolt = <1114000>;
+        regulator-name = "vdd_logic";
+        /* unit == per-mille */
+        pwm-dutycycle-unit = <1000>;
+        /*
+        * Inverted PWM logic, and the duty cycle range is limited
+        * to 30%-70%.
+        */
+        pwm-dutycycle-range = <700 300>; /* */
+    };
+
+  - |
+    // Voltage Table Example:
+    regulator {
+        compatible = "pwm-regulator";
+        pwms = <&pwm1 0 8448 0>;
+        regulator-min-microvolt = <1016000>;
+        regulator-max-microvolt = <1114000>;
+        regulator-name = "vdd_logic";
+
+                /* Voltage Duty-Cycle */
+        voltage-table = <1114000 0>,
+            <1095000 10>,
+            <1076000 20>,
+            <1056000 30>,
+            <1036000 40>,
+            <1016000 50>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 5c73d3f639c7..90c3bda31c23 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. RPMh Regulators
 
 maintainers:
-  - David Collins <collinsd@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 
 description: |
     rpmh-regulator devices support PMIC regulator management via the Voltage
@@ -36,6 +37,8 @@ description: |
       For PM6150, smps1 - smps5, ldo1 - ldo19
       For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
       For PM6350, smps1 - smps5, ldo1 - ldo22
+      For PM660, smps1 - smps6, ldo1 - ldo3, ldo5 - ldo19
+      For PM660L, smps1 - smps3, smps5, ldo1 - ldo8, bob
       For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
@@ -48,6 +51,7 @@ description: |
       For PMI8998, bob
       For PMR735A, smps1 - smps3, ldo1 - ldo7
       For PMX55, smps1 - smps7, ldo1 - ldo16
+      For PMX65, smps1 - smps8, ldo1 - ldo21
 
 properties:
   compatible:
@@ -55,6 +59,8 @@ properties:
       - qcom,pm6150-rpmh-regulators
       - qcom,pm6150l-rpmh-regulators
       - qcom,pm6350-rpmh-regulators
+      - qcom,pm660-rpmh-regulators
+      - qcom,pm660l-rpmh-regulators
       - qcom,pm7325-rpmh-regulators
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
@@ -70,13 +76,14 @@ properties:
       - qcom,pmm8155au-rpmh-regulators
       - qcom,pmr735a-rpmh-regulators
       - qcom,pmx55-rpmh-regulators
+      - qcom,pmx65-rpmh-regulators
 
   qcom,pmic-id:
     description: |
         RPMh resource name suffix used for the regulators found
         on this PMIC.
     $ref: /schemas/types.yaml#/definitions/string
-    enum: [a, b, c, d, e, f]
+    enum: [a, b, c, d, e, f, h, k]
 
   qcom,always-wait-for-ack:
     description: |
@@ -92,35 +99,300 @@ properties:
   vdd-rgb-supply:
     description: Input supply phandle of rgb.
 
-  vin-lvs-1-2-supply:
-    description: Input supply phandle of one or more regulators.
-
-  vdd-bob-supply:
-    description: BOB regulator parent supply phandle.
-
   bob:
     type: object
     $ref: "regulator.yaml#"
     description: BOB regulator node.
+    dependencies:
+      regulator-allow-set-load: ["regulator-allowed-modes"]
 
 patternProperties:
-  "^vdd-s([0-9]+)-supply$":
-    description: Input supply phandle(s) of one or more regulators.
-
-  "^vdd-(l[0-9]+[-]){1,5}supply$":
-    description: Input supply phandle(s) of one or more regulators.
-
   "^(smps|ldo|lvs)[0-9]+$":
     type: object
     $ref: "regulator.yaml#"
     description: smps/ldo regulator nodes(s).
-
-additionalProperties: false
+    dependencies:
+      regulator-allow-set-load: ["regulator-allowed-modes"]
 
 required:
   - compatible
   - qcom,pmic-id
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l3-supply: true
+        vdd-l4-l7-l8-supply: true
+        vdd-l5-l16-l17-l18-l19-supply: true
+        vdd-l10-l14-l15-supply: true
+        vdd-l11-l12-l13-supply: true
+      patternProperties:
+        "^vdd-l[169]-supply$": true
+        "^vdd-s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm6150l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l6-l7-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l5-supply: true
+        vdd-l8-l9-l10-l11-l12-l13-l14-supply: true
+        vdd-l15-l16-l17-l18-l19-supply: true
+      patternProperties:
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm660l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l9-l10-supply: true
+        vdd-l2-supply: true
+        vdd-l3-l5-l7-l8-supply: true
+        vdd-l4-l6-supply: true
+        vdd-s3-s4-supply: true
+      patternProperties:
+        "^vdd-s[125]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm7325-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-l12-l15-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l11-l17-l18-l19-supply: true
+        vdd-l13-supply: true
+        vdd-l14-l16-supply: true
+      patternProperties:
+        "^vdd-l[358]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8005-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8009-rpmh-regulators
+            - qcom,pm8009-1-rpmh-regulators
+    then:
+      properties:
+        vdd-l5-l6-supply: true
+      patternProperties:
+        "^vdd-l[1-47]-supply$": true
+        "^vdd-s[1-2]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150-rpmh-regulators
+            - qcom,pmm8155au-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l8-l11-supply: true
+        vdd-l2-l10-supply: true
+        vdd-l3-l4-l5-l18-supply: true
+        vdd-l6-l9-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l13-l16-l17-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8150l-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l8-supply: true
+        vdd-l2-l3-supply: true
+        vdd-l4-l5-l6-supply: true
+        vdd-l7-l11-supply: true
+        vdd-l9-l10-supply: true
+      patternProperties:
+        "^vdd-s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l4-supply: true
+        vdd-l2-l7-supply: true
+        vdd-l3-l5-supply: true
+        vdd-l6-l9-l10-supply: true
+        vdd-l8-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-2])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8350c-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+        vdd-l1-l12-supply: true
+        vdd-l2-l8-supply: true
+        vdd-l3-l4-l5-l7-l13-supply: true
+        vdd-l6-l9-l11-supply: true
+        vdd-l10-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|10)-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8450-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-4]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8998-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l27-supply: true
+        vdd-l2-l8-l17-supply: true
+        vdd-l3-l11-supply: true
+        vdd-l4-l5-supply: true
+        vdd-l6-supply: true
+        vdd-l7-l12-l14-l15-supply: true
+        vdd-l9-supply: true
+        vdd-l10-l23-l25-supply: true
+        vdd-l13-l19-l21-supply: true
+        vdd-l16-l28-supply: true
+        vdd-l18-l22-supply: true
+        vdd-l20-l24-supply: true
+        vdd-l26-supply: true
+        vin-lvs-1-2-supply: true
+      patternProperties:
+        "^vdd-s([1-9]|1[0-3])-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmg1110-rpmh-regulators
+    then:
+      properties:
+        vdd-s1-supply: true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmi8998-rpmh-regulators
+    then:
+      properties:
+        vdd-bob-supply:
+          description: BOB regulator parent supply phandle.
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmr735a-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-supply: true
+        vdd-l4-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-bob-supply: true
+      patternProperties:
+        "^vdd-s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx55-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l9-supply: true
+        vdd-l4-l12-supply: true
+        vdd-l5-l6-supply: true
+        vdd-l7-l8-supply: true
+        vdd-l10-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l1[4-6]-supply$": true
+        "^vdd-s[1-7]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pmx65-rpmh-regulators
+    then:
+      properties:
+        vdd-l2-l18-supply: true
+        vdd-l5-l6-l16-supply: true
+        vdd-l8-l9-supply: true
+        vdd-l11-l13-supply: true
+      patternProperties:
+        "^vdd-l[1347]-supply$": true
+        "^vdd-l1[0245789]-supply$": true
+        "^vdd-l2[01]-supply$": true
+        "^vdd-s[1-8]-supply$": true
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
index f052e03be402..961eed51912c 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml
@@ -12,7 +12,7 @@ description:
   resides as a subnode of the SMD.  As such, the SMD-RPM regulator requires
   that the SMD and RPM nodes be present.
 
-  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml for
   information pertaining to the SMD node.
 
   Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -24,12 +24,26 @@ description:
 
   For mp5496, s2
 
+  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
+
+  For pm6125 s1, s2, s3, s4, s5, s6, s7, s8, l1, l2, l3, l5, l6, l7, l8, l9,
+  l10, l22, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24
+
+  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
+  l12, l13, l14, l15, l16, l17, l18, l19
+
+  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
+
   For pm8226, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10,
   l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25,
   l26, l27, l28, lvs1
 
   For pm8841, s1, s2, s3, s4, s5, s6, s7, s8
 
+  For pm8909, s1, s2, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+  l14, l15, l17, l18
+
   For pm8916, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13, l14, l15, l16, l17, l18
 
@@ -49,11 +63,6 @@ description:
   l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, l28, lvs1, lvs2
 
-  For pm660, s1, s2, s3, s4, s5, s6, l1, l2, l3, l5, l6, l7, l8, l9, l10, l22,
-  l12, l13, l14, l15, l16, l17, l18, l19
-
-  For pm660l s1, s2, s3, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, bob
-
   For pma8084, s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3,
   l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19,
   l20, l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
@@ -65,31 +74,31 @@ description:
   For pms405, s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
   l12, l13
 
-  For pm2250, s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-  l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22
-
 maintainers:
-  - Kathiravan T <kathirav@codeaurora.org>
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 properties:
   compatible:
     enum:
       - qcom,rpm-mp5496-regulators
+      - qcom,rpm-pm2250-regulators
+      - qcom,rpm-pm6125-regulators
+      - qcom,rpm-pm660-regulators
+      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pm8226-regulators
       - qcom,rpm-pm8841-regulators
+      - qcom,rpm-pm8909-regulators
       - qcom,rpm-pm8916-regulators
       - qcom,rpm-pm8941-regulators
       - qcom,rpm-pm8950-regulators
       - qcom,rpm-pm8953-regulators
       - qcom,rpm-pm8994-regulators
       - qcom,rpm-pm8998-regulators
-      - qcom,rpm-pm660-regulators
-      - qcom,rpm-pm660l-regulators
       - qcom,rpm-pma8084-regulators
       - qcom,rpm-pmi8994-regulators
       - qcom,rpm-pmi8998-regulators
       - qcom,rpm-pms405-regulators
-      - qcom,rpm-pm2250-regulators
 
 patternProperties:
   ".*-supply$":
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
deleted file mode 100644
index c2a39b121b1b..000000000000
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ /dev/null
@@ -1,347 +0,0 @@
-Qualcomm SPMI Regulators
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-			"qcom,pm8004-regulators"
-			"qcom,pm8005-regulators"
-			"qcom,pm8226-regulators"
-			"qcom,pm8841-regulators"
-			"qcom,pm8916-regulators"
-			"qcom,pm8941-regulators"
-			"qcom,pm8950-regulators"
-			"qcom,pm8994-regulators"
-			"qcom,pmi8994-regulators"
-			"qcom,pm660-regulators"
-			"qcom,pm660l-regulators"
-			"qcom,pms405-regulators"
-
-- interrupts:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: List of OCP interrupts.
-
-- interrupt-names:
-	Usage: required if 'interrupts' property present
-	Value type: <string-array>
-	Definition: List of strings defining the names of the
-		    interrupts in the 'interrupts' property 1-to-1.
-		    Supported values are "ocp-<regulator_name>", where
-		    <regulator_name> corresponds to a voltage switch
-		    type regulator.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-	Usage: optional (pm8841 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_l1_l3-supply:
-- vdd_l2-supply:
-- vdd_l4_l5_l6-supply:
-- vdd_l7-supply:
-- vdd_l8_l11_l14_l15_l16-supply:
-- vdd_l9_l10_l12_l13_l17_l18-supply:
-	Usage: optional (pm8916 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1_l3-supply:
-- vdd_l2_lvs_1_2_3-supply:
-- vdd_l4_l11-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l14_l15-supply:
-- vdd_l8_l16_l18_19-supply:
-- vdd_l9_l10_l17_l22-supply:
-- vdd_l13_l20_l23_l24-supply:
-- vdd_l21-supply:
-- vin_5vs-supply:
-	Usage: optional (pm8941 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_l1_l19-supply:
-- vdd_l2_l23-supply:
-- vdd_l3-supply:
-- vdd_l4_l5_l6_l7_l16-supply:
-- vdd_l8_l11_l12_l17_l22-supply:
-- vdd_l9_l10_l13_l14_l15_l18-supply:
-- vdd_l20-supply:
-- vdd_l21-supply:
-	Usage: optional (pm8950 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vdd_s9-supply:
-- vdd_s10-supply:
-- vdd_s11-supply:
-- vdd_s12-supply:
-- vdd_l1-supply:
-- vdd_l2_l26_l28-supply:
-- vdd_l3_l11-supply:
-- vdd_l4_l27_l31-supply:
-- vdd_l5_l7-supply:
-- vdd_l6_l12_l32-supply:
-- vdd_l8_l16_l30-supply:
-- vdd_l9_l10_l18_l22-supply:
-- vdd_l13_l19_l23_l24-supply:
-- vdd_l14_l15-supply:
-- vdd_l17_l29-supply:
-- vdd_l20_l21-supply:
-- vdd_l25-supply:
-- vdd_lvs_1_2-supply:
-	Usage: optional (pm8994 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_l1-supply:
-	Usage: optional (pmi8994 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_l1_l6_l7-supply:
-- vdd_l2_l3-supply:
-- vdd_l5-supply:
-- vdd_l8_l9_l10_l11_l12_l13_l14-supply:
-- vdd_l15_l16_l17_l18_l19-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-	Usage: optional (pm660 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_l1_l9_l10-supply:
-- vdd_l2-supply:
-- vdd_l3_l5_l7_l8-supply:
-- vdd_l4_l6-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-	Usage: optional (pm660l only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- vdd_l1_l2-supply:
-- vdd_l3_l8-supply:
-- vdd_l4-supply:
-- vdd_l5_l6-supply:
-- vdd_l10_l11_l12_l13-supply:
-- vdd_l7-supply:
-- vdd_l9-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-- vdd_s5-supply
-	Usage: optional (pms405 only)
-	Value type: <phandle>
-	Definition: Reference to regulator supplying the input pin, as
-		    described in the data sheet.
-
-- qcom,saw-reg:
-	Usage: optional
-	Value type: <phandle>
-	Description: Reference to syscon node defining the SAW registers.
-
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the PMICs below.
-
-pm8004:
-	s2, s5
-
-pm8005:
-	s1, s2, s3, s4
-
-pm8841:
-	s1, s2, s3, s4, s5, s6, s7, s8
-
-pm8916:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18
-
-pm8941:
-	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
-	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	5vs1, 5vs2
-
-pm8994:
-	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
-	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
-	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
-
-pmi8994:
-	s1, s2, s3, l1
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt - with additional custom properties described below:
-
-- regulator-initial-mode:
-	Usage: optional
-	Value type: <u32>
-	Description: 2 = Set initial mode to auto mode (automatically select
-		    between HPM and LPM); not available on boost type
-		    regulators.
-
-		    1 = Set initial mode to high power mode (HPM), also referred
-		    to as NPM. HPM consumes more ground current than LPM, but
-		    it can source significantly higher load current. HPM is not
-		    available on boost type regulators. For voltage switch type
-		    regulators, HPM implies that over current protection and
-		    soft start are active all the time.
-
-		    0 = Set initial mode to low power mode (LPM).
-
-- qcom,ocp-max-retries:
-	Usage: optional
-	Value type: <u32>
-	Description: Maximum number of times to try toggling a voltage switch
-		     off and back on as a result of consecutive over current
-		     events.
-
-- qcom,ocp-retry-delay:
-	Usage: optional
-	Value type: <u32>
-	Description: Time to delay in milliseconds between each voltage switch
-		     toggle after an over current event takes place.
-
-- qcom,pin-ctrl-enable:
-	Usage: optional
-	Value type: <u32>
-	Description: Bit mask specifying which hardware pins should be used to
-		     enable the regulator, if any; supported bits are:
-			0 = ignore all hardware enable signals
-			BIT(0) = follow HW0_EN signal
-			BIT(1) = follow HW1_EN signal
-			BIT(2) = follow HW2_EN signal
-			BIT(3) = follow HW3_EN signal
-
-- qcom,pin-ctrl-hpm:
-	Usage: optional
-	Value type: <u32>
-	Description: Bit mask specifying which hardware pins should be used to
-		     force the regulator into high power mode, if any;
-		     supported bits are:
-			0 = ignore all hardware enable signals
-			BIT(0) = follow HW0_EN signal
-			BIT(1) = follow HW1_EN signal
-			BIT(2) = follow HW2_EN signal
-			BIT(3) = follow HW3_EN signal
-			BIT(4) = follow PMIC awake state
-
-- qcom,vs-soft-start-strength:
-	Usage: optional
-	Value type: <u32>
-	Description: This property sets the soft start strength for voltage
-		     switch type regulators; supported values are:
-			0 = 0.05 uA
-			1 = 0.25 uA
-			2 = 0.55 uA
-			3 = 0.75 uA
-
-- qcom,saw-slave:
-	Usage: optional
-	Value type: <boo>
-	Description: SAW controlled gang slave. Will not be configured.
-
-- qcom,saw-leader:
-	Usage: optional
-	Value type: <boo>
-	Description: SAW controlled gang leader. Will be configured as
-		     SAW regulator.
-
-Example:
-
-	regulators {
-		compatible = "qcom,pm8941-regulators";
-		vdd_l1_l3-supply = <&s1>;
-
-		s1: s1 {
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1400000>;
-		};
-
-		...
-
-		l1: l1 {
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		....
-	};
-
-Example 2:
-
-	saw3: syscon@9A10000 {
-		compatible = "syscon";
-		reg = <0x9A10000 0x1000>;
-	};
-
-	...
-
-	spm-regulators {
-		compatible = "qcom,pm8994-regulators";
-		qcom,saw-reg = <&saw3>;
-		s8 {
-			qcom,saw-slave;
-		};
-		s9 {
-			qcom,saw-slave;
-		};
-		s10 {
-			qcom,saw-slave;
-		};
-		pm8994_s11_saw: s11 {
-			qcom,saw-leader;
-			regulator-always-on;
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1140000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
new file mode 100644
index 000000000000..bdf34c2de96b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Regulators
+
+maintainers:
+  - Robert Marko <robimarko@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm6125-regulators
+      - qcom,pm660-regulators
+      - qcom,pm660l-regulators
+      - qcom,pm8004-regulators
+      - qcom,pm8005-regulators
+      - qcom,pm8226-regulators
+      - qcom,pm8841-regulators
+      - qcom,pm8916-regulators
+      - qcom,pm8941-regulators
+      - qcom,pm8950-regulators
+      - qcom,pm8994-regulators
+      - qcom,pmi8994-regulators
+      - qcom,pmp8074-regulators
+      - qcom,pms405-regulators
+
+  qcom,saw-reg:
+    description: Reference to syscon node defining the SAW registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
+    description: List of regulators and its properties
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      qcom,ocp-max-retries:
+        description:
+          Maximum number of times to try toggling a voltage switch off and
+          back on as a result of consecutive over current events
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      qcom,ocp-retry-delay:
+        description:
+          Time to delay in milliseconds between each voltage switch toggle
+          after an over current event takes place
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      qcom,pin-ctrl-enable:
+        description:
+          Bit mask specifying which hardware pins should be used to enable the
+          regulator, if any.
+          Supported bits are
+          0 = ignore all hardware enable signals
+          BIT(0) = follow HW0_EN signal
+          BIT(1) = follow HW1_EN signal
+          BIT(2) = follow HW2_EN signal
+          BIT(3) = follow HW3_EN signal
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+
+      qcom,pin-ctrl-hpm:
+        description:
+          Bit mask specifying which hardware pins should be used to force the
+          regulator into high power mode, if any.
+          Supported bits are
+          0 = ignore all hardware enable signals
+          BIT(0) = follow HW0_EN signal
+          BIT(1) = follow HW1_EN signal
+          BIT(2) = follow HW2_EN signal
+          BIT(3) = follow HW3_EN signal
+          BIT(4) = follow PMIC awake state
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+
+      qcom,vs-soft-start-strength:
+        description:
+          This property sets the soft start strength for voltage switch type
+          regulators.
+          Supported values are
+          0 = 0.05 uA
+          1 = 0.25 uA
+          2 = 0.55 uA
+          3 = 0.75 uA
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 3
+
+      qcom,saw-slave:
+        description: SAW controlled gang slave. Will not be configured.
+        type: boolean
+
+      qcom,saw-leader:
+        description:
+          SAW controlled gang leader. Will be configured as SAW regulator.
+        type: boolean
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm6125-regulators
+    then:
+      properties:
+        vdd_l1_l7_l17_l18-supply: true
+        vdd_l2_l3_l4-supply: true
+        vdd_l5_l15_l19_l20_l21_l22-supply: true
+        vdd_l6_l8-supply: true
+        vdd_l9_l11-supply: true
+        vdd_l10_l13_l14-supply: true
+        vdd_l12_l16-supply: true
+        vdd_l23_l24-supply: true
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660-regulators
+    then:
+      properties:
+        vdd_l15_l16_l17_l18_l19-supply: true
+        vdd_l1_l6_l7-supply: true
+        vdd_l2_l3-supply: true
+        vdd_l5-supply: true
+        vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-regulators
+    then:
+      properties:
+        vdd_l1_l9_l10-supply: true
+        vdd_l2-supply: true
+        vdd_l3_l5_l7_l8-supply: true
+        vdd_l4_l6-supply: true
+      patternProperties:
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8004-regulators
+    then:
+      patternProperties:
+        "^vdd_s[25]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8005-regulators
+    then:
+      patternProperties:
+        "^vdd_s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8226-regulators
+    then:
+      properties:
+        vdd_l10_l11_l13-supply: true
+        vdd_l12_l14-supply: true
+        vdd_l15_l16_l17_l18-supply: true
+        vdd_l19_l20_l21_l22_l23_l28-supply: true
+        vdd_l1_l2_l4_l5-supply: true
+        vdd_l25-supply: true
+        vdd_l3_l24_l26-supply: true
+        vdd_l6_l7_l8_l9_l27-supply: true
+        vdd_lvs1-supply: true
+      patternProperties:
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8841-regulators
+    then:
+      patternProperties:
+        "^vdd_s[1-8]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-regulators
+    then:
+      properties:
+        vdd_l1_l3-supply: true
+        vdd_l4_l5_l6-supply: true
+        vdd_l8_l11_l14_l15_l16-supply: true
+        vdd_l9_l10_l12_l13_l17_l18-supply: true
+      patternProperties:
+        "^vdd_l[27]-supply$": true
+        "^vdd_s[1-4]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-regulators
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: Over-current protection interrupt for 5V S1
+            - description: Over-current protection interrupt for 5V S2
+        interrupt-names:
+          items:
+            - const: ocp-5vs1
+            - const: ocp-5vs2
+        vdd_l13_l20_l23_l24-supply: true
+        vdd_l1_l3-supply: true
+        vdd_l21-supply: true
+        vdd_l2_lvs_1_2_3-supply: true
+        vdd_l4_l11-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l14_l15-supply: true
+        vdd_l8_l16_l18_19-supply: true
+        vdd_l9_l10_l17_l22-supply: true
+        vin_5vs-supply: true
+      patternProperties:
+        "^vdd_s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8950-regulators
+    then:
+      properties:
+        vdd_l1_l19-supply: true
+        vdd_l20-supply: true
+        vdd_l21-supply: true
+        vdd_l2_l23-supply: true
+        vdd_l3-supply: true
+        vdd_l4_l5_l6_l7_l16-supply: true
+        vdd_l8_l11_l12_l17_l22-supply: true
+        vdd_l9_l10_l13_l14_l15_l18-supply: true
+      patternProperties:
+        "^vdd_s[1-6]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8994-regulators
+    then:
+      properties:
+        vdd_l1-supply: true
+        vdd_l13_l19_l23_l24-supply: true
+        vdd_l14_l15-supply: true
+        vdd_l17_l29-supply: true
+        vdd_l20_l21-supply: true
+        vdd_l25-supply: true
+        vdd_l2_l26_l28-supply: true
+        vdd_l3_l11-supply: true
+        vdd_l4_l27_l31-supply: true
+        vdd_l5_l7-supply: true
+        vdd_l6_l12_l32-supply: true
+        vdd_l8_l16_l30-supply: true
+        vdd_l9_l10_l18_l22-supply: true
+        vdd_lvs_1_2-supply: true
+      patternProperties:
+        "^vdd_s[1-9][0-2]?-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmi8994-regulators
+    then:
+      properties:
+        vdd_l1-supply: true
+      patternProperties:
+        "^vdd_s[1-3]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pmp8074-regulators
+    then:
+      properties:
+        vdd_l10_l11_l12_l13-supply: true
+        vdd_l1_l2-supply: true
+        vdd_l3_l8-supply: true
+        vdd_l5_l6_l15-supply: true
+      patternProperties:
+        "^vdd_l[479]-supply$": true
+        "^vdd_s[1-5]-supply$": true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pms405-regulators
+    then:
+      properties:
+        vdd_s3-supply: true
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    regulators {
+      compatible = "qcom,pm8941-regulators";
+      vdd_l1_l3-supply = <&s1>;
+
+      s1: s1 {
+        regulator-min-microvolt = <1300000>;
+        regulator-max-microvolt = <1400000>;
+      };
+
+      l1: l1 {
+        regulator-min-microvolt = <1225000>;
+        regulator-max-microvolt = <1300000>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index 12ed98c28aaa..dbe78cd4adba 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: The Qualcomm PMIC VBUS output regulator driver
 
 maintainers:
-  - Wesley Cheng <wcheng@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 description: |
   This regulator driver controls the VBUS output by the Qualcomm PMIC.  This
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 1ddc1efd19e2..f97b8083678f 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -20,6 +20,7 @@ properties:
 
   lab:
     type: object
+    additionalProperties: false
 
     properties:
       qcom,soft-start-us:
@@ -33,11 +34,19 @@ properties:
         description:
           Short-circuit and over-current interrupts for lab.
 
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
     required:
       - interrupts
+      - interrupt-names
 
   ibb:
     type: object
+    additionalProperties: false
 
     properties:
       qcom,discharge-resistor-kohms:
@@ -52,8 +61,15 @@ properties:
         description:
           Short-circuit and over-current interrupts for ibb.
 
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: sc-err
+          - const: ocp
+
     required:
       - interrupts
+      - interrupt-names
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index ed560ee8714e..6e8aa9eed3aa 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -23,6 +23,7 @@ properties:
 
   regulator-microvolt-offset:
     description: Offset applied to voltages to compensate for voltage drops
+    $ref: "/schemas/types.yaml#/definitions/uint32"
 
   regulator-min-microamp:
     description: smallest current consumers may set
@@ -213,6 +214,8 @@ properties:
       is 2-way - all coupled regulators should be linked with each other.
       A regulator should not be coupled with its supplier.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    items:
+      maxItems: 1
 
   regulator-coupled-max-spread:
     description: Array of maximum spread between voltages of coupled regulators
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
index 235e593b3b2c..4a8a221bc902 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4801-regulator.yaml
@@ -17,9 +17,6 @@ description: |
   Datasheet is available at
   https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf
 
-#The valid names for RT4801 regulator nodes are:
-#DSVP, DSVN
-
 properties:
   compatible:
     enum:
@@ -33,18 +30,30 @@ properties:
       The first one is ENP to enable DSVP, and second one is ENM to enable DSVN.
       Number of GPIO in the array list could be 1 or 2.
       If only one gpio is specified, only one gpio used to control ENP/ENM.
-      Else both are spefied, DSVP/DSVN could be controlled individually.
-      Othersie, this property not specified. treat both as always-on regulator.
+      Else if both are specified, DSVP/DSVN could be controlled individually.
+      If this property not specified, treat both as always-on regulators.
+
+      Property is deprecated. Use enable-gpios in each regulator.
     minItems: 1
     maxItems: 2
+    deprecated: true
 
 patternProperties:
   "^DSV(P|N)$":
     type: object
     $ref: regulator.yaml#
+    unevaluatedProperties: false
     description:
       Properties for single display bias regulator.
 
+    properties:
+      enable-gpios:
+        description:
+          GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured
+          for controlling both regulators.  If this property not specified for
+          any regulator, treat both as always-on regulators.
+        maxItems: 1
+
 required:
   - compatible
   - reg
@@ -60,19 +69,20 @@ examples:
         rt4801@73 {
             compatible = "richtek,rt4801";
             reg = <0x73>;
-            enable-gpios = <&gpio26 2 0>, <&gpio26 3 0>;
 
             dsvp: DSVP {
                 regulator-name = "rt4801,dsvp";
                 regulator-min-microvolt = <4000000>;
                 regulator-max-microvolt = <6000000>;
                 regulator-boot-on;
+                enable-gpios = <&gpio26 2 0>;
             };
             dsvn: DSVN {
                 regulator-name = "rt4801,dsvn";
                 regulator-min-microvolt = <4000000>;
                 regulator-max-microvolt = <6000000>;
                 regulator-boot-on;
+                enable-gpios = <&gpio26 3 0>;
             };
 
         };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
new file mode 100644
index 000000000000..edb411be0390
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5190a-regulator.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5190a-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5190A PMIC Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5190A integrates 1 channel buck controller, 3 channels high efficiency
+  synchronous buck converters, 1 LDO, I2C control interface and peripherial
+  logical control.
+
+  It also supports mute AC OFF depop sound and quick setting storage while
+  input power is removed.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5190a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vin2-supply:
+    description: phandle to buck2 input voltage.
+
+  vin3-supply:
+    description: phandle to buck3 input voltage.
+
+  vin4-supply:
+    description: phandle to buck4 input voltage.
+
+  vinldo-supply:
+    description: phandle to ldo input voltage
+
+  richtek,mute-enable:
+    description: |
+      The mute function uses 'mutein', 'muteout', and 'vdet' pins as the control
+      signal. When enabled, The normal behavior is to bypass the 'mutein' signal
+      'muteout'. But if the power source removal is detected from 'vdet',
+      whatever the 'mutein' signal is, it will pull down the 'muteout' to force
+      speakers mute. this function is commonly used to prevent the speaker pop
+      noise during AC power turned off in the modern TV system design.
+    type: boolean
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$|^ldo$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          regulator description for buck1 to buck4, and ldo.
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+             buck operating mode, only buck1/4 support mode operating.
+              0: auto mode
+              1: force pwm mode
+            items:
+              enum: [0, 1]
+
+          richtek,latchup-enable:
+            type: boolean
+            description: |
+              If specified, undervolt protection mode changes from the default
+              hiccup to latchup.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@64 {
+        compatible = "richtek,rt5190a";
+        reg = <0x64>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        vin2-supply = <&rt5190_buck1>;
+        vin3-supply = <&rt5190_buck1>;
+        vin4-supply = <&rt5190_buck1>;
+
+        regulators {
+          rt5190_buck1: buck1 {
+            regulator-name = "rt5190a-buck1";
+            regulator-min-microvolt = <5090000>;
+            regulator-max-microvolt = <5090000>;
+            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5190a-buck2";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+          };
+          buck3 {
+            regulator-name = "rt5190a-buck3";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1400000>;
+            regulator-boot-on;
+          };
+          buck4 {
+            regulator-name = "rt5190a-buck4";
+            regulator-min-microvolt = <850000>;
+            regulator-max-microvolt = <850000>;
+            regulator-allowed-modes = <RT5190A_OPMODE_AUTO RT5190A_OPMODE_FPWM>;
+            regulator-boot-on;
+          };
+          ldo {
+            regulator-name = "rt5190a-ldo";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml
new file mode 100644
index 000000000000..0a4c9576a432
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5759-regulator.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5759-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5759 High Performance DCDC Converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5759 is a high-performance, synchronous step-down DC-DC converter that
+  can deliver up to 9A output current from 3V to 6.5V input supply, The output
+  voltage can be programmable with I2C controlled 7-Bit VID.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT5759/DS5759-00.pdf
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5759
+      - richtek,rt5759a
+
+  reg:
+    maxItems: 1
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: auto mode (PSKIP: pulse skipping)
+        1: force pwm mode
+    items:
+      enum: [0, 1]
+
+  richtek,watchdog-enable:
+    description: enable the external watchdog reset pin listening
+    type: boolean
+
+allOf:
+  - $ref: regulator.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: richtek,rt5759
+    then:
+      properties:
+        richtek,watchdog-enable: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  # example 1 for RT5759
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@62 {
+        compatible = "richtek,rt5759";
+        reg = <0x62>;
+        regulator-name = "rt5759-buck";
+        regulator-min-microvolt = <600000>;
+        regulator-max-microvolt = <1500000>;
+        regulator-boot-on;
+      };
+    };
+  # example 2 for RT5759A
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@62 {
+        compatible = "richtek,rt5759a";
+        reg = <0x62>;
+        regulator-name = "rt5759a-buck";
+        regulator-min-microvolt = <600000>;
+        regulator-max-microvolt = <1725000>;
+        regulator-boot-on;
+        richtek,watchdog-enable;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
index 7d0adb74a396..d61e8675f067 100644
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -27,6 +27,7 @@ properties:
     description:
       properties for wled regulator
     $ref: regulator.yaml#
+    unevaluatedProperties: false
 
     properties:
       regulator-name:
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
index 0627dec513da..0f9eb317ba9a 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPA01 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
index e3b780715f44..f1c50dcd0b04 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps11.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPS11 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
index 579d77aefc3f..53b105a4ead1 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps13.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPS13 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
index fdea290b3e94..01f9d4e236e9 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps14.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPS14 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
index b3a883c94628..9576c2df45a6 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mps15.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPS15 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
index 0ded6953e3b6..39b652c3c3c4 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpu02.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S2MPU02 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
index 3c1617b66861..172631ca3c25 100644
--- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S5M8767 Power Management IC regulators
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   This is a part of device tree bindings for S2M and S5M family of Power
diff --git a/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
index a52a67c869b5..c3a902e11b5d 100644
--- a/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
+++ b/Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/regulator/silergy,sy8106a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Silergy SY8106A Voltage Regulator Device Tree Bindings
+title: Silergy SY8106A Voltage Regulator
 
 maintainers:
   - Ondrej Jirman <megous@megous.com>
diff --git a/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
new file mode 100644
index 000000000000..9d84117530ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/siliconmitus,sm5703-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Mitus SM5703 multi function device regulators
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  SM5703 regulators node should be a sub node of the SM5703 MFD node. See SM5703 MFD
+  bindings at Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
+  Regulator nodes should be named as USBLDO_<number>, BUCK, VBUS, LDO_<number>.
+  The definition for each of these nodes is defined using the standard
+  binding for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+properties:
+  buck:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the BUCK regulator.
+
+  vbus:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for the VBUS regulator.
+
+patternProperties:
+  "^ldo[1-3]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for single LDO regulator.
+
+  "^usbldo[1-2]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single USBLDO regulator.
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index 1218f21ba320..c0acf949753d 100644
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -14,9 +14,6 @@ description: |
 maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
-allOf:
-  - $ref: "regulator.yaml#"
-
 # USB3 Controller
 
 properties:
@@ -36,27 +33,51 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names:
-    oneOf:
-      - items:          # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:          # for others
-          - const: link
+  clock-names: true
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:          # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:
-          - const: link
+  reset-names: true
 
-additionalProperties: false
+allOf:
+  - $ref: "regulator.yaml#"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-regulator
+              - socionext,uniphier-pro5-usb3-regulator
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -83,4 +104,3 @@ examples:
             resets = <&sys_rst 14>;
         };
     };
-
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index df0191b1ceba..38bdaef4fa39 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -23,7 +23,7 @@ properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: "/schemas/types.yaml#/definitions/phandle"
     description: phandle to system configuration controller.
 
   vdda-supply:
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index 836d4156d54c..a5a27ee0a9e6 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -51,4 +51,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
new file mode 100644
index 000000000000..12aeddedde05
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6236x Voltage Regulators
+
+maintainers:
+  - Laxman Dewangan <ldewangan@nvidia.com>
+
+description: |
+  The TPS6236x are a family of step down dc-dc converter with
+  an input voltage range of 2.5V to 5.5V. The devices provide
+  up to 3A peak load current, and an output voltage range of
+  0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
+
+  Datasheet is available at:
+  https://www.ti.com/lit/gpn/tps62360
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62360
+      - ti,tps62361
+      - ti,tps62362
+      - ti,tps62363
+
+  reg:
+    maxItems: 1
+
+  ti,vsel0-gpio:
+    description: |
+      GPIO for controlling VSEL0 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL0 control.
+    maxItems: 1
+
+  ti,vsel1-gpio:
+    description: |
+      GPIO for controlling VSEL1 line. If this property
+      is missing, then assume that there is no GPIO for
+      VSEL1 control.
+    maxItems: 1
+
+  ti,enable-vout-discharge:
+    description: Enable output discharge.
+    type: boolean
+
+  ti,enable-pull-down:
+    description: Enable pull down.
+    type: boolean
+
+  ti,vsel0-state-high:
+    description: |
+      Initial state of VSEL0 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+  ti,vsel1-state-high:
+    description: |
+      Initial state of VSEL1 input is high. If this property
+      is missing, then assume the state as low.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@60 {
+            compatible = "ti,tps62361";
+            reg = <0x60>;
+            regulator-name = "tps62361-vout";
+            regulator-min-microvolt = <500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-boot-on;
+            ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+            ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            ti,vsel0-state-high;
+            ti,vsel1-state-high;
+            ti,enable-pull-down;
+            ti,enable-vout-discharge;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
new file mode 100644
index 000000000000..0f29c75f42ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps62864.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS62864/TPS6286/TPS62868/TPS62869 voltage regulator
+
+maintainers:
+  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tps62864
+      - ti,tps62866
+      - ti,tps62868
+      - ti,tps62869
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      "SW":
+        type: object
+        $ref: regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/ti,tps62864.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@48 {
+        compatible = "ti,tps62864";
+        reg = <0x48>;
+
+        regulators {
+          SW {
+            regulator-name = "+0.85V";
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <890000>;
+            regulator-initial-mode = <TPS62864_MODE_FPWM>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
new file mode 100644
index 000000000000..78be79930fda
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI tps65219 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Jerome Neanne <jerome.neanne@baylibre.com>
+
+description: |
+  Regulator nodes should be named to buck<number> and ldo<number>.
+
+properties:
+  compatible:
+    enum:
+      - ti,tps65219
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    type: boolean
+    description: Optional property that indicates that this device is
+      controlling system power.
+
+  interrupts:
+    description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 1
+
+  ti,power-button:
+    type: boolean
+    description: |
+      Optional property that sets the EN/PB/VSENSE pin to be a
+      power-button.
+      TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either
+      1. EN in which case it functions as an enable pin.
+      2. VSENSE which compares the voltages and triggers an automatic
+      on/off request.
+      3. PB in which case it can be configured to trigger an interrupt
+      to the SoC.
+      ti,power-button reflects the last one of those options
+      where the board has a button wired to the pin and triggers
+      an interrupt on pressing it.
+
+patternProperties:
+  "^buck[1-3]-supply$":
+    description: Input supply phandle of one regulator.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle of one regulator.
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single LDO regulator.
+
+        unevaluatedProperties: false
+
+      "^buck[1-3]$":
+        type: object
+        $ref: regulator.yaml#
+        description:
+          Properties for single BUCK regulator.
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps65219: pmic@30 {
+            compatible = "ti,tps65219";
+            reg = <0x30>;
+            buck1-supply = <&vcc_3v3_sys>;
+            buck2-supply = <&vcc_3v3_sys>;
+            buck3-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&buck2_reg>;
+            ldo3-supply = <&vcc_3v3_sys>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            pinctrl-0 = <&pmic_irq_pins_default>;
+
+            interrupt-parent = <&gic500>;
+            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+            ti,power-button;
+
+            regulators {
+                buck1_reg: buck1 {
+                    regulator-name = "VDD_CORE";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <750000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck2_reg: buck2 {
+                    regulator-name = "VCC1V8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck3_reg: buck3 {
+                    regulator-name = "VDD_LPDDR4";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1_reg: ldo1 {
+                    regulator-name = "VDDSHV_SD_IO_PMIC";
+                    regulator-min-microvolt = <33000000>;
+                    regulator-max-microvolt = <33000000>;
+                };
+
+                ldo2_reg: ldo2 {
+                    regulator-name = "VDDAR_CORE";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3_reg: ldo3 {
+                    regulator-name = "VDDA_1V8";
+                    regulator-min-microvolt = <18000000>;
+                    regulator-max-microvolt = <18000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4_reg: ldo4 {
+                    regulator-name = "VDD_PHY_2V5";
+                    regulator-min-microvolt = <25000000>;
+                    regulator-max-microvolt = <25000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt b/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
deleted file mode 100644
index 1b20c3dbcdb8..000000000000
--- a/Documentation/devicetree/bindings/regulator/tps62360-regulator.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-TPS62360 Voltage regulators
-
-Required properties:
-- compatible: Must be one of the following.
-	"ti,tps62360"
-	"ti,tps62361",
-	"ti,tps62362",
-	"ti,tps62363",
-- reg: I2C slave address
-
-Optional properties:
-- ti,enable-vout-discharge: Enable output discharge. This is boolean value.
-- ti,enable-pull-down: Enable pull down. This is boolean value.
-- ti,vsel0-gpio: GPIO for controlling VSEL0 line.
-  If this property is missing, then assume that there is no GPIO
-  for vsel0 control.
-- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
-  If this property is missing, then assume that there is no GPIO
-  for vsel1 control.
-- ti,vsel0-state-high: Initial state of vsel0 input is high.
-  If this property is missing, then assume the state as low (0).
-- ti,vsel1-state-high: Initial state of vsel1 input is high.
-  If this property is missing, then assume the state as low (0).
-
-Any property defined as part of the core regulator binding, defined in
-regulator.txt, can also be used.
-
-Example:
-
-	abc: tps62360 {
-		compatible = "ti,tps62361";
-		reg =  <0x60>;
-		regulator-name = "tps62361-vout";
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <1500000>;
-		regulator-boot-on
-		ti,vsel0-gpio = <&gpio1 16 0>;
-		ti,vsel1-gpio = <&gpio1 17 0>;
-		ti,vsel0-state-high;
-		ti,vsel1-state-high;
-		ti,enable-pull-down;
-		ti,enable-force-pwm;
-		ti,enable-vout-discharge;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/vexpress.txt b/Documentation/devicetree/bindings/regulator/vexpress.txt
index d775f72487aa..1c2e92c7831e 100644
--- a/Documentation/devicetree/bindings/regulator/vexpress.txt
+++ b/Documentation/devicetree/bindings/regulator/vexpress.txt
@@ -4,7 +4,7 @@ Versatile Express voltage regulators
 Requires node properties:
 - "compatible" value: "arm,vexpress-volt"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Required regulator properties:
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index fc16d903353e..3a1f59ad79e2 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -15,14 +15,15 @@ maintainers:
 properties:
   compatible:
     enum:
-      - fsl,imx8mq-cm4
+      - fsl,imx6sx-cm4
+      - fsl,imx7d-cm4
+      - fsl,imx7ulp-cm4
       - fsl,imx8mm-cm4
       - fsl,imx8mn-cm7
       - fsl,imx8mp-cm7
+      - fsl,imx8mq-cm4
       - fsl,imx8ulp-cm33
-      - fsl,imx7d-cm4
-      - fsl,imx7ulp-cm4
-      - fsl,imx6sx-cm4
+      - fsl,imx93-cm33
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
index d21a25ee96e6..7e091eaffc18 100644
--- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml
@@ -17,16 +17,20 @@ properties:
   compatible:
     enum:
       - mediatek,mt8183-scp
+      - mediatek,mt8186-scp
+      - mediatek,mt8188-scp
       - mediatek,mt8192-scp
       - mediatek,mt8195-scp
 
   reg:
     description:
-      Should contain the address ranges for memory regions SRAM, CFG, and
-      L1TCM.
+      Should contain the address ranges for memory regions SRAM, CFG, and,
+      on some platforms, L1TCM.
+    minItems: 2
     maxItems: 3
 
   reg-names:
+    minItems: 2
     items:
       - const: sram
       - const: cfg
@@ -41,21 +45,49 @@ properties:
   clock-names:
     const: main
 
+  interrupts:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      If present, name (or relative path) of the file within the
+      firmware search path containing the firmware image used when
+      initializing SCP.
+
+  memory-region:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - reg-names
 
-if:
-  properties:
-    compatible:
-      enum:
-        - mediatek,mt8183-scp
-        - mediatek,mt8192-scp
-then:
-  required:
-    - clocks
-    - clock-names
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-scp
+            - mediatek,mt8192-scp
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8183-scp
+            - mediatek,mt8186-scp
+            - mediatek,mt8188-scp
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
 
 additionalProperties:
   type: object
@@ -75,10 +107,10 @@ additionalProperties:
 
 examples:
   - |
-    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
 
     scp@10500000 {
-        compatible = "mediatek,mt8183-scp";
+        compatible = "mediatek,mt8192-scp";
         reg = <0x10500000 0x80000>,
               <0x10700000 0x8000>,
               <0x10720000 0xe0000>;
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index 63e06d93bca3..db9e0f0c2bea 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,msm8226-adsp-pil
       - qcom,msm8974-adsp-pil
       - qcom,msm8996-adsp-pil
       - qcom,msm8996-slpi-pil
@@ -29,10 +30,16 @@ properties:
       - qcom,sc8180x-adsp-pas
       - qcom,sc8180x-cdsp-pas
       - qcom,sc8180x-mpss-pas
+      - qcom,sc8280xp-adsp-pas
+      - qcom,sc8280xp-nsp0-pas
+      - qcom,sc8280xp-nsp1-pas
       - qcom,sdm660-adsp-pas
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
       - qcom,sdx55-mpss-pas
+      - qcom,sm6350-adsp-pas
+      - qcom,sm6350-cdsp-pas
+      - qcom,sm6350-mpss-pas
       - qcom,sm8150-adsp-pas
       - qcom,sm8150-cdsp-pas
       - qcom,sm8150-mpss-pas
@@ -44,6 +51,10 @@ properties:
       - qcom,sm8350-cdsp-pas
       - qcom,sm8350-slpi-pas
       - qcom,sm8350-mpss-pas
+      - qcom,sm8450-adsp-pas
+      - qcom,sm8450-cdsp-pas
+      - qcom,sm8450-mpss-pas
+      - qcom,sm8450-slpi-pas
 
   reg:
     maxItems: 1
@@ -56,13 +67,28 @@ properties:
     minItems: 1
     maxItems: 8
 
+  interconnects:
+    maxItems: 1
+
   interrupts:
     minItems: 5
-    maxItems: 6
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
 
   interrupt-names:
     minItems: 5
-    maxItems: 6
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
 
   resets:
     minItems: 1
@@ -105,25 +131,31 @@ properties:
       - description: Stop the modem
 
   qcom,smem-state-names:
-    $ref: /schemas/types.yaml#/definitions/string-array
     description: The names of the state bits used for SMP2P output
     items:
       - const: stop
 
   qcom,halt-regs:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offsets within syscon for q6 halt registers
+          - description: offsets within syscon for modem halt registers
+          - description: offsets within syscon for nc halt registers
     description:
       Phandle reference to a syscon representing TCSR followed by the
       three offsets within syscon for q6, modem and nc halt registers.
 
   smd-edge:
-    type: object
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
     description:
       Qualcomm Shared Memory subnode which represents communication edge,
       channels and devices related to the ADSP.
+    unevaluatedProperties: false
 
   glink-edge:
-    type: object
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
     description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the ADSP.
@@ -146,6 +178,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8226-adsp-pil
               - qcom,msm8974-adsp-pil
               - qcom,msm8996-adsp-pil
               - qcom,msm8996-slpi-pil
@@ -156,8 +189,14 @@ allOf:
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
               - qcom,sc8180x-mpss-pas
+              - qcom,sc8280xp-adsp-pas
+              - qcom,sc8280xp-nsp0-pas
+              - qcom,sc8280xp-nsp1-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
               - qcom,sm8150-mpss-pas
@@ -169,6 +208,10 @@ allOf:
               - qcom,sm8350-cdsp-pas
               - qcom,sm8350-slpi-pas
               - qcom,sm8350-mpss-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-cdsp-pas
+              - qcom,sm8450-slpi-pas
+              - qcom,sm8450-mpss-pas
     then:
       properties:
         clocks:
@@ -254,6 +297,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8226-adsp-pil
               - qcom,msm8974-adsp-pil
               - qcom,msm8996-adsp-pil
               - qcom,msm8996-slpi-pil
@@ -264,8 +308,13 @@ allOf:
               - qcom,qcs404-wcss-pas
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
+              - qcom,sc8280xp-adsp-pas
+              - qcom,sc8280xp-nsp0-pas
+              - qcom,sc8280xp-nsp1-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
+              - qcom,sm6350-adsp-pas
+              - qcom,sm6350-cdsp-pas
               - qcom,sm8150-adsp-pas
               - qcom,sm8150-cdsp-pas
               - qcom,sm8150-slpi-pas
@@ -275,22 +324,15 @@ allOf:
               - qcom,sm8350-adsp-pas
               - qcom,sm8350-cdsp-pas
               - qcom,sm8350-slpi-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-cdsp-pas
+              - qcom,sm8450-slpi-pas
     then:
       properties:
         interrupts:
-          items:
-            - description: Watchdog interrupt
-            - description: Fatal interrupt
-            - description: Ready interrupt
-            - description: Handover interrupt
-            - description: Stop acknowledge interrupt
+          maxItems: 5
         interrupt-names:
-          items:
-            - const: wdog
-            - const: fatal
-            - const: ready
-            - const: handover
-            - const: stop-ack
+          maxItems: 5
 
   - if:
       properties:
@@ -301,26 +343,16 @@ allOf:
               - qcom,sc7280-mpss-pas
               - qcom,sc8180x-mpss-pas
               - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
+              - qcom,sm8450-mpss-pas
     then:
       properties:
         interrupts:
-          items:
-            - description: Watchdog interrupt
-            - description: Fatal interrupt
-            - description: Ready interrupt
-            - description: Handover interrupt
-            - description: Stop acknowledge interrupt
-            - description: Shutdown acknowledge interrupt
+          minItems: 6
         interrupt-names:
-          items:
-            - const: wdog
-            - const: fatal
-            - const: ready
-            - const: handover
-            - const: stop-ack
-            - const: shutdown-ack
+          minItems: 6
 
   - if:
       properties:
@@ -337,8 +369,11 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8226-adsp-pil
               - qcom,msm8996-adsp-pil
               - qcom,msm8998-adsp-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
     then:
       properties:
         power-domains:
@@ -390,13 +425,17 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sm8150-adsp-pas
-              - qcom,sm8150-cdsp-pas
+              - qcom,sm6350-cdsp-pas
     then:
       properties:
         power-domains:
           items:
             - description: CX power domain
+            - description: MX power domain
+        power-domain-names:
+          items:
+            - const: cx
+            - const: mx
 
   - if:
       properties:
@@ -405,8 +444,10 @@ allOf:
             enum:
               - qcom,sc7280-mpss-pas
               - qcom,sdx55-mpss-pas
+              - qcom,sm6350-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
+              - qcom,sm8450-mpss-pas
     then:
       properties:
         power-domains:
@@ -425,11 +466,15 @@ allOf:
             enum:
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
+              - qcom,sc8280xp-adsp-pas
+              - qcom,sm6350-adsp-pas
               - qcom,sm8150-slpi-pas
               - qcom,sm8250-adsp-pas
               - qcom,sm8250-slpi-pas
               - qcom,sm8350-adsp-pas
               - qcom,sm8350-slpi-pas
+              - qcom,sm8450-adsp-pas
+              - qcom,sm8450-slpi-pas
     then:
       properties:
         power-domains:
@@ -447,6 +492,7 @@ allOf:
           contains:
             enum:
               - qcom,sm8350-cdsp-pas
+              - qcom,sm8450-cdsp-pas
     then:
       properties:
         power-domains:
@@ -463,6 +509,22 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc8280xp-nsp0-pas
+              - qcom,sc8280xp-nsp1-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: NSP power domain
+        power-domain-names:
+          items:
+            - const: nsp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,qcs404-cdsp-pas
     then:
       properties:
@@ -496,6 +558,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,msm8226-adsp-pil
               - qcom,msm8974-adsp-pil
               - qcom,msm8996-adsp-pil
               - qcom,msm8996-slpi-pil
@@ -513,11 +576,12 @@ allOf:
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     adsp {
         compatible = "qcom,msm8974-adsp-pil";
 
-        interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
                       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -539,7 +603,7 @@ examples:
         qcom,smem-state-names = "stop";
 
         smd-edge {
-            interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
 
             qcom,ipc = <&apcs 8 8>;
             qcom,smd-edge = <1>;
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
new file mode 100644
index 000000000000..25c27464ef25
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm G-Link subnode represents communication edge, channels and devices
+  related to the remote processor.
+
+properties:
+  $nodename:
+    const: "glink-edge"
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    $ref: /schemas/misc/qcom,fastrpc.yaml#
+    required:
+      - qcom,glink-channels
+    description:
+      Qualcomm FastRPC
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description: The names of the state bits used for SMP2P output
+
+  mboxes:
+    maxItems: 1
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      ID of the shared memory used by GLINK for communication with remote
+      processor.
+
+required:
+  - interrupts
+  - label
+  - mboxes
+  - qcom,remote-pid
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc@8a00000 {
+        reg = <0x08a00000 0x10000>;
+        // ...
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
deleted file mode 100644
index 1337a3d93d35..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
+++ /dev/null
@@ -1,140 +0,0 @@
-Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm Technology Inc. Hexagon v56 core.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,qcs404-cdsp-pil",
-		    "qcom,sdm845-adsp-pil"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the qdsp6ss register
-
-- interrupts-extended:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must list the watchdog, fatal IRQs ready, handover and
-		    stop-ack IRQs
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack"
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition:  List of phandles and clock specifier pairs for the Hexagon,
-		     per clock-names below.
-
-- clock-names:
-	Usage: required for SDM845 ADSP
-	Value type: <stringlist>
-	Definition: List of clock input name strings sorted in the same
-		    order as the clocks property. Definition must have
-		    "xo", "sway_cbcr", "lpass_ahbs_aon_cbcr",
-		    "lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
-		    and "qdsp6ss_core".
-
-- clock-names:
-	Usage: required for QCS404 CDSP
-	Value type: <stringlist>
-	Definition: List of clock input name strings sorted in the same
-		    order as the clocks property. Definition must have
-		    "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
-		    "q6ss_master", "q6_axim".
-
-- power-domains:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to cx power domain node.
-
-- resets:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the list of resets for the Hexagon.
-
-- reset-names:
-        Usage: required for SDM845 ADSP
-        Value type: <stringlist>
-        Definition: must be "pdc_sync" and "cc_lpass"
-
-- reset-names:
-        Usage: required for QCS404 CDSP
-        Value type: <stringlist>
-        Definition: must be "restart"
-
-- qcom,halt-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the offset within syscon for Hexagon halt register.
-
-- memory-region:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the reserved-memory for the firmware
-
-- qcom,smem-states:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the smem state for requesting the Hexagon to
-		    shut down
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "stop"
-
-
-= SUBNODES
-The adsp node may have an subnode named "glink-edge" that describes the
-communication edge, channels and devices related to the Hexagon.
-See ../soc/qcom/qcom,glink.txt for details on how to describe these.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the
-ADSP, as it is found on SDM845 boards.
-
-	remoteproc@17300000 {
-		compatible = "qcom,sdm845-adsp-pil";
-		reg = <0x17300000 0x40c>;
-
-		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-			<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready",
-			"handover", "stop-ack";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>,
-			<&gcc GCC_LPASS_SWAY_CLK>,
-			<&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
-			<&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
-			<&lpasscc LPASS_QDSP6SS_XO_CLK>,
-			<&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
-			<&lpasscc LPASS_QDSP6SS_CORE_CLK>;
-		clock-names = "xo", "sway_cbcr",
-			"lpass_ahbs_aon_cbcr",
-			"lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
-			"qdsp6ss_sleep", "qdsp6ss_core";
-
-		power-domains = <&rpmhpd SDM845_CX>;
-
-		resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
-			 <&aoss_reset AOSS_CC_LPASS_RESTART>;
-		reset-names = "pdc_sync", "cc_lpass";
-
-		qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
-
-		memory-region = <&pil_adsp_mem>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-	};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
index 9282837d64ba..a7711e3c998c 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
@@ -30,7 +30,7 @@ additionalProperties: false
 examples:
   - |
     imem@146bf000 {
-      compatible = "syscon", "simple-mfd";
+      compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
       reg = <0x146bf000 0x1000>;
 
       #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 8f1507052afd..d0ebd16ee0e1 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -14,8 +14,6 @@ on the Qualcomm Hexagon core.
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
-		    "qcom,sc7180-mss-pil"
-		    "qcom,sc7280-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -37,7 +35,7 @@ on the Qualcomm Hexagon core.
 - interrupt-names:
 	Usage: required
 	Value type: <stringlist>
-	Definition: The interrupts needed depends on the the compatible
+	Definition: The interrupts needed depends on the compatible
 		    string:
 	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
@@ -47,8 +45,6 @@ on the Qualcomm Hexagon core.
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
-	qcom,sc7180-mss-pil:
-	qcom,sc7280-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -86,11 +82,6 @@ on the Qualcomm Hexagon core.
 	qcom,msm8998-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "qdss"
-	qcom,sc7180-mss-pil:
-		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
-		    "nav"
-	qcom,sc7280-mss-pil:
-		    must be "iface", "xo", "snoc_axi", "offline", "pka"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -102,7 +93,7 @@ on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SC7180, SC7280, SDM845 SoCs
+		    sub-system on SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -111,7 +102,7 @@ on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SC7180, SC7280, SDM845 SoCs
+		    sub-system on SDM845 SoCs
 
 For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
 should be referenced as follows:
@@ -176,10 +167,6 @@ For the compatible string below the following supplies are required:
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
-	qcom,sc7180-mss-pil:
-		    must be "cx", "mx", "mss"
-	qcom,sc7280-mss-pil:
-		    must be "cx", "mss"
 	qcom,sdm845-mss-pil:
 		    must be "cx", "mx", "mss"
 
@@ -205,36 +192,6 @@ For the compatible string below the following supplies are required:
 	Definition: a phandle reference to a syscon representing TCSR followed
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
-		    a phandle reference to a syscon representing TCSR followed
-		    by the four offsets within syscon for q6, modem, nc and vq6
-		    halt registers on SC7280 SoCs.
-
-For the compatible strings below the following phandle references are required:
-  "qcom,sc7180-mss-pil"
-- qcom,spare-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the offset within syscon for conn_box_spare0 register
-		    used by the modem sub-system running on SC7180 SoC.
-
-For the compatible strings below the following phandle references are required:
-  "qcom,sc7280-mss-pil"
-- qcom,ext-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: two phandle references to syscons representing TCSR_REG and
-		    TCSR register space followed by the two offsets within the syscon
-		    to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
-		    registers respectively.
-
-- qcom,qaccept-regs:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a phandle reference to a syscon representing TCSR followed
-		    by the three offsets within syscon for mdm, cx and axi
-		    qaccept registers used by the modem sub-system running on
-		    SC7280 SoC.
 
 The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
 on platforms which do not have TrustZone.
@@ -250,36 +207,30 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain:
 
 The Hexagon node may also have an subnode named either "smd-edge" or
 "glink-edge" that describes the communication edge, channels and devices
-related to the Hexagon.  See ../soc/qcom/qcom,smd.txt and
+related to the Hexagon.  See ../soc/qcom/qcom,smd.yaml and
 ../soc/qcom/qcom,glink.txt for details on how to describe these.
 
 = EXAMPLE
 The following example describes the resources needed to boot control the
 Hexagon, as it is found on MSM8974 boards.
 
-	modem-rproc@fc880000 {
-		compatible = "qcom,q6v5-pil";
-		reg = <0xfc880000 0x100>,
-		      <0xfc820000 0x020>;
+	remoteproc@fc880000 {
+		compatible = "qcom,msm8974-mss-pil";
+		reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
 		reg-names = "qdsp6", "rmb";
 
-		interrupts-extended = <&intc 0 24 1>,
-				      <&modem_smp2p_in 0 0>,
-				      <&modem_smp2p_in 1 0>,
-				      <&modem_smp2p_in 2 0>,
-				      <&modem_smp2p_in 3 0>;
-		interrupt-names = "wdog",
-				  "fatal",
-				  "ready",
-				  "handover",
-				  "stop-ack";
+		interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
 		clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
 			 <&gcc GCC_MSS_CFG_AHB_CLK>,
-			 <&gcc GCC_BOOT_ROM_AHB_CLK>;
-		clock-names = "iface", "bus", "mem";
-
-		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+			 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+			 <&xo_board>;
+		clock-names = "iface", "bus", "mem", "xo";
 
 		resets = <&gcc GCC_MSS_RESTART>;
 		reset-names = "mss_restart";
@@ -289,6 +240,8 @@ Hexagon, as it is found on MSM8974 boards.
 		mx-supply = <&pm8841_s1>;
 		pll-supply = <&pm8941_l12>;
 
+		qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
 		qcom,smem-states = <&modem_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
 
@@ -299,4 +252,13 @@ Hexagon, as it is found on MSM8974 boards.
 		mpss {
 			memory-region = <&mpss_region>;
 		};
+
+		smd-edge {
+			interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+			qcom,ipc = <&apcs 8 12>;
+			qcom,smd-edge = <0>;
+
+			label = "modem";
+		};
 	};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
new file mode 100644
index 000000000000..06f5f93f62a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,qcs404-cdsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 CDSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. CDSP (Compute DSP).
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-cdsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: TBU clock
+      - description: BIMC clock
+      - description: AHB AON clock
+      - description: Q6SS SLAVE clock
+      - description: Q6SS MASTER clock
+      - description: Q6 AXIM clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway
+      - const: tbu
+      - const: bimc
+      - const: ahb_aon
+      - const: q6ss_slave
+      - const: q6ss_master
+      - const: q6_axim
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: AOSS restart
+
+  reset-names:
+    items:
+      - const: restart
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+    remoteproc@b00000 {
+        compatible = "qcom,qcs404-cdsp-pil";
+        reg = <0x00b00000 0x4040>;
+
+        interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack";
+
+        clocks = <&xo_board>,
+                 <&gcc GCC_CDSP_CFG_AHB_CLK>,
+                 <&gcc GCC_CDSP_TBU_CLK>,
+                 <&gcc GCC_BIMC_CDSP_CLK>,
+                 <&turingcc TURING_WRAPPER_AON_CLK>,
+                 <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+                 <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+                 <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+        clock-names = "xo",
+                      "sway",
+                      "tbu",
+                      "bimc",
+                      "ahb_aon",
+                      "q6ss_slave",
+                      "q6ss_master",
+                      "q6_axim";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&gcc GCC_CDSP_RESTART>;
+        reset-names = "restart";
+
+        qcom,halt-regs = <&tcsr 0x19004>;
+
+        memory-region = <&cdsp_fw_mem>;
+
+        qcom,smem-states = <&cdsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
new file mode 100644
index 000000000000..e4a7da8020f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7180 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS BUS clock
+      - description: GCC MSS NAV clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: GCC MSS MFAB_AXIS clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nav
+      - const: snoc_axi
+      - const: mnoc_axi
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+
+  qcom,spare-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Spare registers are multipurpose registers used for errata
+      handling.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the conn_box_spare0 register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,spare-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7180-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_NAV_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "bus", "nav", "snoc_axi",
+                      "mnoc_axi", "xo";
+
+        power-domains = <&rpmhpd SC7180_CX>,
+                        <&rpmhpd SC7180_MX>,
+                        <&rpmhpd SC7180_MSS>;
+        power-domain-names = "cx", "mx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+        qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+        glink-edge {
+            interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apss_shared 12>;
+            qcom,remote-pid = <1>;
+            label = "modem";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
new file mode 100644
index 000000000000..b4de0521a89d
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 MSS Peripheral Image Loader
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  This document describes the hardware for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-mss-pil
+
+  reg:
+    items:
+      - description: MSS QDSP6 registers
+      - description: RMB registers
+
+  reg-names:
+    items:
+      - const: qdsp6
+      - const: rmb
+
+  iommus:
+    items:
+      - description: MSA Stream 1
+      - description: MSA Stream 2
+
+  interconnects:
+    items:
+      - description: Path leading to system memory
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC MSS IFACE clock
+      - description: GCC MSS OFFLINE clock
+      - description: GCC MSS SNOC_AXI clock
+      - description: RPMH PKA clock
+      - description: RPMH XO clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: offline
+      - const: snoc_axi
+      - const: pka
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MSS power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mss
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC reset
+
+  reset-names:
+    items:
+      - const: mss_restart
+      - const: pdc_reset
+
+  memory-region:
+    items:
+      - description: MBA reserved region
+      - description: modem reserved region
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    items:
+      - description: Name of MBA firmware
+      - description: Name of modem firmware
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Halt registers are used to halt transactions of various sub-components
+      within MSS.
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the Q6 halt register
+          - description: offset to the modem halt register
+          - description: offset to the nc halt register
+          - description: offset to the vq6 halt register
+
+  qcom,ext-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: EXT registers are used for various power related functionality
+    items:
+      - items:
+          - description: phandle to TCSR_REG registers
+          - description: offset to the force_clk_en register
+          - description: offset to the rscc_disable register
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the axim1_clk_off register
+          - description: offset to the crypto_clk_off register
+
+  qcom,qaccept-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: QACCEPT registers are used to bring up/down Q-channels
+    items:
+      - items:
+          - description: phandle to TCSR_MUTEX registers
+          - description: offset to the mdm qaccept register
+          - description: offset to the cx qaccept register
+          - description: offset to the axi qaccept register
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the DSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from MSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and MSS
+
+      label:
+        const: modem
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - iommus
+  - interconnects
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - qcom,ext-regs
+  - qcom,qaccept-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+
+    remoteproc_mpss: remoteproc@4080000 {
+        compatible = "qcom,sc7280-mss-pil";
+        reg = <0x04080000 0x10000>, <0x04180000 0x48>;
+        reg-names = "qdsp6", "rmb";
+
+        iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+
+        interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+        interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+                 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                 <&rpmhcc RPMH_PKA_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MSS>;
+        power-domain-names = "cx", "mss";
+
+        memory-region = <&mba_mem>, <&mpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&modem_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+                 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+        reset-names = "mss_restart", "pdc_reset";
+
+        qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+        qcom,ext-regs = <&tcsr 0x10000 0x10004>, <&tcsr_mutex 0x26004 0x26008>;
+        qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+                                   IPCC_MPROC_SIGNAL_GLINK_QMP
+                                   IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_MPSS
+                      IPCC_MPROC_SIGNAL_GLINK_QMP>;
+            label = "modem";
+            qcom,remote-pid = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
new file mode 100644
index 000000000000..b6bd33438584
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-wpss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 WPSS Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. WPSS.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-wpss-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+      - description: Shutdown acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+      - const: shutdown-ack
+
+  clocks:
+    items:
+      - description: GCC WPSS AHB BDG Master clock
+      - description: GCC WPSS AHB clock
+      - description: GCC WPSS RSCP clock
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: ahb_bdg
+      - const: ahb
+      - const: rscp
+      - const: xo
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+
+  resets:
+    items:
+      - description: AOSS restart
+      - description: PDC SYNC
+
+  reset-names:
+    items:
+      - const: restart
+      - const: pdc_sync
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of the firmware which should be loaded for this remote
+      processor.
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    const: stop
+
+  glink-edge:
+    $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the ADSP.
+
+    properties:
+      interrupts:
+        items:
+          - description: IRQ from WPSS to GLINK
+
+      mboxes:
+        items:
+          - description: Mailbox for communication between APPS and WPSS
+
+      label:
+        items:
+          - const: wpss
+
+      apr: false
+      fastrpc: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,qmp
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - glink-edge
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    remoteproc@8a00000 {
+        compatible = "qcom,sc7280-wpss-pil";
+        reg = <0x08a00000 0x10000>;
+
+        interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover",
+                          "stop-ack", "shutdown-ack";
+
+        clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+                 <&gcc GCC_WPSS_AHB_CLK>,
+                 <&gcc GCC_WPSS_RSCP_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "ahb_bdg", "ahb",
+                      "rscp", "xo";
+
+        power-domains = <&rpmhpd SC7280_CX>,
+                        <&rpmhpd SC7280_MX>;
+        power-domain-names = "cx", "mx";
+
+        memory-region = <&wpss_mem>;
+
+        qcom,qmp = <&aoss_qmp>;
+
+        qcom,smem-states = <&wpss_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+                 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+        reset-names = "restart", "pdc_sync";
+
+        qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_WPSS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "wpss";
+            qcom,remote-pid = <13>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
new file mode 100644
index 000000000000..20df83a96ef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 ADSP Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots firmware
+  on the Qualcomm Technology Inc. ADSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-adsp-pil
+
+  reg:
+    maxItems: 1
+    description:
+      The base address and size of the qdsp6ss register
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    items:
+      - description: XO clock
+      - description: SWAY clock
+      - description: LPASS AHBS AON clock
+      - description: LPASS AHBM AON clock
+      - description: QDSP XO clock
+      - description: Q6SP6SS SLEEP clock
+      - description: Q6SP6SS CORE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sway_cbcr
+      - const: lpass_ahbs_aon_cbcr
+      - const: lpass_ahbm_aon_cbcr
+      - const: qdsp6ss_xo
+      - const: qdsp6ss_sleep
+      - const: qdsp6ss_core
+
+  power-domains:
+    items:
+      - description: CX power domain
+
+  resets:
+    items:
+      - description: PDC AUDIO SYNC RESET
+      - description: CC LPASS restart
+
+  reset-names:
+    items:
+      - const: pdc_sync
+      - const: cc_lpass
+
+  memory-region:
+    maxItems: 1
+    description: Reference to the reserved-memory for the Hexagon core
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Phandle reference to a syscon representing TCSR followed by the
+      three offsets within syscon for q6, modem and nc halt registers.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: States used by the AP to signal the Hexagon core
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - qcom,halt-regs
+  - memory-region
+  - qcom,smem-states
+  - qcom,smem-state-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,lpass-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/reset/qcom,sdm845-pdc.h>
+    #include <dt-bindings/reset/qcom,sdm845-aoss.h>
+    remoteproc@17300000 {
+        compatible = "qcom,sdm845-adsp-pil";
+        reg = <0x17300000 0x40c>;
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                "handover", "stop-ack";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&gcc GCC_LPASS_SWAY_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
+                 <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_XO_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
+                 <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
+        clock-names = "xo", "sway_cbcr",
+                "lpass_ahbs_aon_cbcr",
+                "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
+                "qdsp6ss_sleep", "qdsp6ss_core";
+
+        power-domains = <&rpmhpd SDM845_CX>;
+
+        resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+                 <&aoss_reset AOSS_CC_LPASS_RESTART>;
+        reset-names = "pdc_sync", "cc_lpass";
+
+        qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
+
+        memory-region = <&pil_adsp_mem>;
+
+        qcom,smem-states = <&adsp_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
new file mode 100644
index 000000000000..7ec8a6b6682c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,smd-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SMD Edge communication channel nodes
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm SMD subnode represents a remote subsystem or a remote processor of
+  some sort - or in SMD language an "edge". The name of the edges are not
+  important.
+
+  In turn, subnodes of the "edges" represent devices tied to SMD channels on
+  that "edge". The names of the devices are not important. The properties of
+  these nodes are defined by the individual bindings for the SMD devices.
+  See also Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
+
+properties:
+  $nodename:
+    const: "smd-edge"
+
+  apr:
+    $ref: /schemas/soc/qcom/qcom,apr.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm APR/GPR (Asynchronous/Generic Packet Router)
+
+  fastrpc:
+    $ref: /schemas/misc/qcom,fastrpc.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm FastRPC
+
+  interrupts:
+    maxItems: 1
+
+  label:
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote processor.
+
+  qcom,smd-edge:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote processor in the smd channel allocation
+      table.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+  rpm-requests:
+    $ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm Resource Power Manager (RPM) over SMD.
+
+  wcnss:
+    $ref: /schemas/soc/qcom/qcom,wcnss.yaml
+    required:
+      - qcom,smd-channels
+    description:
+      Qualcomm WCNSS for Bluetooth, WiFi and FM radio.
+
+required:
+  - interrupts
+  - qcom,smd-edge
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    remoteproc {
+        // ...
+
+        smd-edge {
+            interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 8>;
+            qcom,smd-edge = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
index a83080b8905c..ac423f4c3f1b 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -111,7 +111,7 @@ and its resource dependencies. It is described by the following properties:
 
 The wcnss node can also have an subnode named "smd-edge" that describes the SMD
 edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge.
+See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
 
 = EXAMPLE
 The following example describes the resources needed to boot control the WCNSS,
diff --git a/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
new file mode 100644
index 000000000000..a7d25fa920e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/renesas,rcar-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas R-Car remote processor controller bindings
+
+maintainers:
+  - Julien Massot <julien.massot@iot.bzh>
+
+description: |
+  This document defines the bindings for the remoteproc component that loads and
+  boots firmwares on the Renesas R-Car family chipset.
+  R-Car gen3 family may have a realtime processor, this processor shares peripheral
+  and RAM with the host processor with the same address map.
+
+properties:
+  compatible:
+    const: renesas,rcar-cr7
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    description:
+      List of phandles to the reserved memory regions associated with the
+      remoteproc device. This is variable and describes the memories shared with
+      the remote processor (e.g. remoteproc firmware and carveouts, rpmsg
+      vrings, ...).
+      (see ../reserved-memory/reserved-memory.yaml)
+
+required:
+  - compatible
+  - resets
+  - memory-region
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cr7_ram: cr7_ram@40040000 {
+            no-map;
+            reg = <0x0 0x40040000 0x0 0x1fc0000>;
+        };
+    };
+
+    cr7_rproc: cr7 {
+        compatible = "renesas,rcar-cr7";
+        memory-region = <&cr7_ram>;
+        power-domains = <&sysc R8A7795_PD_CR7>;
+        resets = <&cpg 222>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index b587c97c282b..da50f0e99fe2 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -29,17 +29,22 @@ properties:
 
   st,syscfg-holdboot:
     description: remote processor reset hold boot
-      - Phandle of syscon block.
-      - The offset of the hold boot setting register.
-      - The field mask of the hold boot.
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the hold boot setting register
+          - description: The field mask of the hold boot
 
   st,syscfg-tz:
     description:
       Reference to the system configuration which holds the RCC trust zone mode
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the trust zone setting register
+          - description: The field mask of the trust zone state
 
   interrupts:
     description: Should contain the WWDG1 watchdog reset interrupt
@@ -93,20 +98,32 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the system configuration which holds the remote
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block
+          - description: The offset of the power setting register
+          - description: The field mask of the PDDS selection
 
   st,syscfg-m4-state:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the tamp register which exposes the Cortex-M4 state.
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: The offset of the tamp register
+          - description: The field mask of the Cortex-M4 state
 
   st,syscfg-rsc-tbl:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: |
       Reference to the tamp register which references the Cortex-M4
       resource table address.
-    maxItems: 1
+    items:
+      - items:
+          - description: Phandle of syscon block with the tamp register
+          - description: The offset of the tamp register
+          - description: The field mask of the Cortex-M4 resource table address
 
   st,auto-boot:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
index 5ec6505ac408..cedbc5efdc56 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-dsp-rproc.yaml
@@ -33,9 +33,11 @@ properties:
     enum:
       - ti,j721e-c66-dsp
       - ti,j721e-c71-dsp
+      - ti,j721s2-c71-dsp
     description:
       Use "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs
       Use "ti,j721e-c71-dsp" for C71x DSPs on K3 J721E SoCs
+      Use "ti,j721s2-c71-dsp" for C71x DSPs on K3 J721S2 SoCs
 
   resets:
     description: |
@@ -77,6 +79,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 4
+    items:
+      maxItems: 1
     description: |
       phandles to one or more reserved on-chip SRAM regions. The regions
       should be defined as child nodes of the respective SRAM node, and
@@ -106,6 +110,7 @@ else:
       compatible:
         enum:
           - ti,j721e-c71-dsp
+          - ti,j721s2-c71-dsp
   then:
     properties:
       reg:
@@ -137,6 +142,14 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
+        mailbox0_cluster3: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        mailbox0_cluster4: mailbox-1 {
+            #mbox-cells = <1>;
+        };
+
         bus@100000 {
             compatible = "simple-bus";
             #address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index eeef255c4045..fb9605f0655b 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -38,6 +38,7 @@ properties:
       - ti,j721e-r5fss
       - ti,j7200-r5fss
       - ti,am64-r5fss
+      - ti,j721s2-r5fss
 
   power-domains:
     description: |
@@ -64,9 +65,9 @@ properties:
     description: |
       Configuration Mode for the Dual R5F cores within the R5F cluster.
       Should be either a value of 1 (LockStep mode) or 0 (Split mode) on
-      most SoCs (AM65x, J721E, J7200), default is LockStep mode if omitted;
-      and should be either a value of 0 (Split mode) or 2 (Single-CPU mode)
-      on AM64x SoCs, default is Split mode if omitted.
+      most SoCs (AM65x, J721E, J7200, J721s2), default is LockStep mode if
+      omitted; and should be either a value of 0 (Split mode) or 2
+      (Single-CPU mode) on AM64x SoCs, default is Split mode if omitted.
 
 # R5F Processor Child Nodes:
 # ==========================
@@ -94,8 +95,7 @@ patternProperties:
       addresses. Cache and memory access settings are provided through a
       Memory Protection Unit (MPU), programmable only from the R5Fs.
 
-    allOf:
-      - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+    $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
     properties:
       compatible:
@@ -104,6 +104,7 @@ patternProperties:
           - ti,j721e-r5f
           - ti,j7200-r5f
           - ti,am64-r5f
+          - ti,j721s2-r5f
 
       reg:
         items:
@@ -187,6 +188,8 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         minItems: 1
         maxItems: 4
+        items:
+          maxItems: 1
         description: |
           phandles to one or more reserved on-chip SRAM regions. The regions
           should be defined as child nodes of the respective SRAM node, and
@@ -234,6 +237,14 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
+        mailbox0: mailbox-0 {
+            #mbox-cells = <1>;
+        };
+
+        mailbox1: mailbox-1 {
+            #mbox-cells = <1>;
+        };
+
         bus@100000 {
             compatible = "simple-bus";
             #address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
index c6c12129d6b7..1fdc2741c36e 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
@@ -123,13 +123,14 @@ properties:
 
   ti,bootreg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      Should be a triple of the phandle to the System Control
-      Configuration region that contains the boot address
-      register, the register offset of the boot address
-      register within the System Control module, and the bit
-      shift within the register. This property is required for
-      all the DSP instances on OMAP4, OMAP5 and DRA7xx SoCs.
+    items:
+      - items:
+          - description: phandle to the System Control Configuration region
+          - description: register offset of the boot address register
+          - description: the bit shift within the register
+    description:
+      This property is required for all the DSP instances on OMAP4, OMAP5
+      and DRA7xx SoCs.
 
   ti,autosuspend-delay-ms:
     description: |
@@ -140,6 +141,8 @@ properties:
 
   ti,timers:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       One or more phandles to OMAP DMTimer nodes, that serve
       as System/Tick timers for the OS running on the remote
@@ -156,6 +159,8 @@ properties:
 
   ti,watchdog-timers:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       One or more phandles to OMAP DMTimer nodes, used to
       serve as Watchdog timers for the processor cores. This
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
index d7c3a78e37e6..cd55d80137f7 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,pru-rproc.yaml
@@ -36,17 +36,18 @@ properties:
     enum:
       - ti,am3356-pru   # for AM335x SoC family (AM3356+ SoCs only)
       - ti,am4376-pru   # for AM437x SoC family (AM4376+ SoCs only)
+      - ti,am5728-pru   # for AM57xx SoC family
+      - ti,am625-pru    # for PRUs in K3 AM62x SoC family
       - ti,am642-pru    # for PRUs in K3 AM64x SoC family
       - ti,am642-rtu    # for RTUs in K3 AM64x SoC family
       - ti,am642-tx-pru # for Tx_PRUs in K3 AM64x SoC family
-      - ti,am5728-pru   # for AM57xx SoC family
-      - ti,k2g-pru      # for 66AK2G SoC family
       - ti,am654-pru    # for PRUs in K3 AM65x SoC family
       - ti,am654-rtu    # for RTUs in K3 AM65x SoC family
       - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs
       - ti,j721e-pru    # for PRUs in K3 J721E SoC family
       - ti,j721e-rtu    # for RTUs in K3 J721E SoC family
       - ti,j721e-tx-pru # for Tx_PRUs in K3 J721E SoC family
+      - ti,k2g-pru      # for 66AK2G SoC family
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml b/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml
new file mode 100644
index 000000000000..a924fcfca085
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/google,open-dice.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/google,open-dice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open Profile for DICE
+
+description: |
+  This binding represents a reserved memory region containing data
+  generated by the Open Profile for DICE protocol.
+
+  See https://pigweed.googlesource.com/open-dice/
+
+maintainers:
+  - David Brazdil <dbrazdil@google.com>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: google,open-dice
+
+  reg:
+    description: page-aligned region of memory containing DICE data
+
+required:
+  - compatible
+  - reg
+  - no-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        dice: dice@12340000 {
+            compatible = "google,open-dice";
+            reg = <0x00 0x12340000 0x2000>;
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
index 83dfe499a259..592f180e6b0d 100644
--- a/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reserved-memory/memory-region.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Reserved Memory Region Device Tree Binding
+title: Reserved Memory Region
 
 maintainers:
   - devicetree-spec@vger.kernel.org
diff --git a/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
new file mode 100644
index 000000000000..b1b0421a4255
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/nvidia,tegra210-emc-table.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/nvidia,tegra210-emc-table.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 EMC Frequency Table
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: On Tegra210, firmware passes a binary representation of the
+  EMC frequency table via a reserved memory region.
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: nvidia,tegra210-emc-table
+
+  reg:
+    description: region of memory reserved by firmware to pass the EMC
+      frequency table
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
diff --git a/Documentation/devicetree/bindings/reserved-memory/phram.yaml b/Documentation/devicetree/bindings/reserved-memory/phram.yaml
new file mode 100644
index 000000000000..6c4db28015f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/phram.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reserved-memory/phram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MTD/block device in RAM
+
+description: |
+  Specifies that the reserved memory region can be used as an MTD or block
+  device.
+
+  The "phram" node is named after the "MTD in PHysical RAM" driver which
+  provides an implementation of this functionality in Linux.
+
+maintainers:
+  - Vincent Whitchurch <vincent.whitchurch@axis.com>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+  - $ref: "/schemas/mtd/mtd.yaml"
+
+properties:
+  compatible:
+    const: phram
+
+  reg:
+    description: region of memory that can be used as an MTD/block device
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        phram: flash@12340000 {
+            compatible = "phram";
+            label = "rootfs";
+            reg = <0x12340000 0x00800000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
deleted file mode 100644
index 68395530c0a5..000000000000
--- a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Command DB
----------
-
-Command DB is a database that provides a mapping between resource key and the
-resource address for a system resource managed by a remote processor. The data
-is stored in a shared memory region and is loaded by the remote processor.
-
-Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
-controlling shared resources. Depending on the board configuration the shared
-resource properties may change. These properties are dynamically probed by the
-remote processor and made available in the shared memory.
-
-The bindings for Command DB is specified in the reserved-memory section in
-devicetree. The devicetree representation of the command DB driver should be:
-
-Properties:
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "qcom,cmd-db"
-
-- reg:
-	Usage: required
-	Value type: <prop encoded array>
-	Definition: The register address that points to the actual location of
-		    the Command DB in memory.
-
-Example:
-
-	reserved-memory {
-		[...]
-		reserved-memory@85fe0000 {
-			reg = <0x0 0x85fe0000 0x0 0x20000>;
-			compatible = "qcom,cmd-db";
-			no-map;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml
new file mode 100644
index 000000000000..df1b5e0ed3f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,cmd-db.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,cmd-db.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Command DB
+
+description: |
+  Command DB is a database that provides a mapping between resource key and the
+  resource address for a system resource managed by a remote processor. The data
+  is stored in a shared memory region and is loaded by the remote processor.
+
+  Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+  controlling shared resources. Depending on the board configuration the shared
+  resource properties may change. These properties are dynamically probed by the
+  remote processor and made available in the shared memory.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,cmd-db
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        reserved-memory@85fe0000 {
+            reg = <0x85fe0000 0x20000>;
+            compatible = "qcom,cmd-db";
+            no-map;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt
deleted file mode 100644
index 8562ba1dce69..000000000000
--- a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm Remote File System Memory binding
-
-This binding describes the Qualcomm remote filesystem memory, which serves the
-purpose of describing the shared memory region used for remote processors to
-access block device data using the Remote Filesystem protocol.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be:
-		    "qcom,rmtfs-mem"
-
-- reg:
-	Usage: required for static allocation
-	Value type: <prop-encoded-array>
-	Definition: must specify base address and size of the memory region,
-		    as described in reserved-memory.txt
-
-- size:
-	Usage: required for dynamic allocation
-	Value type: <prop-encoded-array>
-	Definition: must specify a size of the memory region, as described in
-		    reserved-memory.txt
-
-- qcom,client-id:
-	Usage: required
-	Value type: <u32>
-	Definition: identifier of the client to use this region for buffers.
-
-- qcom,vmid:
-	Usage: optional
-	Value type: <u32>
-	Definition: vmid of the remote processor, to set up memory protection.
-
-= EXAMPLE
-The following example shows the remote filesystem memory setup for APQ8016,
-with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000.
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		rmtfs@86700000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0x86700000 0x0 0xe0000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
new file mode 100644
index 000000000000..2998f1c8f0db
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reserved-memory/qcom,rmtfs-mem.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Remote File System Memory
+
+description: |
+  This binding describes the Qualcomm remote filesystem memory, which serves the
+  purpose of describing the shared memory region used for remote processors to
+  access block device data using the Remote Filesystem protocol.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "reserved-memory.yaml"
+
+properties:
+  compatible:
+    const: qcom,rmtfs-mem
+
+  qcom,client-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      identifier of the client to use this region for buffers
+
+  qcom,vmid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      vmid of the remote processor, to set up memory protection
+
+required:
+  - qcom,client-id
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    reserved-memory {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        rmtfs@86700000 {
+            compatible = "qcom,rmtfs-mem";
+            reg = <0x86700000 0xe0000>;
+            no-map;
+
+            qcom,client-id = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
index f4c351a69542..0391871cf44d 100644
--- a/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/ramoops.yaml
@@ -142,4 +142,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
index 7a0744052ff6..44f72bcf1782 100644
--- a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reserved-memory/reserved-memory.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: /reserved-memory Child Node Common Device Tree Bindings
+title: /reserved-memory Child Node Common
 
 maintainers:
   - devicetree-spec@vger.kernel.org
diff --git a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
index a4bf757d6881..618105f079be 100644
--- a/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
+++ b/Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
@@ -56,6 +56,16 @@ properties:
       If this property is present, then Linux will use the region for
       the default pool of the consistent DMA allocator.
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: restricted-dma-pool
+then:
+  properties:
+    no-map: false
+    reusable: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
index 001c0d2a8c1f..2a248e511c18 100644
--- a/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/allwinner,sun6i-a31-clock-reset.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/allwinner,sun6i-a31-clock-reset.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Peripheral Reset Controller Device Tree Bindings
+title: Allwinner A31 Peripheral Reset Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
new file mode 100644
index 000000000000..4379cec6b35a
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/altr,rst-mgr.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/altr,rst-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA Reset Manager
+
+maintainers:
+  - Dinh Nguyen <dinguyen@altera.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Cyclone5/Arria5/Arria10
+        const: altr,rst-mgr
+      - description: Stratix10 ARM64 SoC
+        items:
+          - const: altr,stratix10-rst-mgr
+          - const: altr,rst-mgr
+
+  reg:
+    maxItems: 1
+
+  altr,modrst-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset of the first modrst register
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - altr,modrst-offset
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    rstmgr@ffd05000 {
+        compatible = "altr,rst-mgr";
+        reg = <0xffd05000 0x1000>;
+        altr,modrst-offset = <0x10>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
deleted file mode 100644
index 43e580ef64ba..000000000000
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* Amlogic audio memory arbiter controller
-
-The Amlogic Audio ARB is a simple device which enables or
-disables the access of Audio FIFOs to DDR on AXG based SoC.
-
-Required properties:
-- compatible: 'amlogic,meson-axg-audio-arb' or
-	      'amlogic,meson-sm1-audio-arb'
-- reg: physical base address of the controller and length of memory
-       mapped region.
-- clocks: phandle to the fifo peripheral clock provided by the audio
-	  clock controller.
-- #reset-cells: must be 1.
-
-Example on the A113 SoC:
-
-arb: reset-controller@280 {
-	compatible = "amlogic,meson-axg-audio-arb";
-	reg = <0x0 0x280 0x0 0x4>;
-	#reset-cells = <1>;
-	clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
-};
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
new file mode 100644
index 000000000000..704a502adc5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-axg-audio-arb.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/amlogic,meson-axg-audio-arb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic audio memory arbiter controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description: The Amlogic Audio ARB is a simple device which enables or disables
+  the access of Audio FIFOs to DDR on AXG based SoC.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-axg-audio-arb
+      - amlogic,meson-sm1-audio-arb
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      phandle to the fifo peripheral clock provided by the audio clock
+      controller.
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    // on the A113 SoC:
+    #include <dt-bindings/clock/axg-audio-clkc.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        arb: reset-controller@280 {
+            compatible = "amlogic,meson-axg-audio-arb";
+            reg = <0x0 0x280 0x0 0x4>;
+            #reset-cells = <1>;
+            clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index 92922d3afd14..98db2aa74dc8 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SoC Reset Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
@@ -17,6 +17,7 @@ properties:
       - amlogic,meson-gxbb-reset # Reset Controller on GXBB and compatible SoCs
       - amlogic,meson-axg-reset # Reset Controller on AXG and compatible SoCs
       - amlogic,meson-a1-reset # Reset Controller on A1 and compatible SoCs
+      - amlogic,meson-s4-reset # Reset Controller on S4 and compatible SoCs
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/ath79-reset.txt b/Documentation/devicetree/bindings/reset/ath79-reset.txt
deleted file mode 100644
index 4c56330bf398..000000000000
--- a/Documentation/devicetree/bindings/reset/ath79-reset.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset"
-              as fallback
-- reg: Base address and size of the controllers memory area
-- #reset-cells : Specifies the number of cells needed to encode reset
-                 line, should be 1
-
-Example:
-
-	reset-controller@1806001c {
-		compatible = "qca,ar9132-reset", "qca,ar7100-reset";
-		reg = <0x1806001c 0x4>;
-
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
new file mode 100644
index 000000000000..98465d26949e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/atmel,at91sam9260-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel/Microchip System Reset Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  The system reset controller can be used to reset the CPU. In case of
+  SAMA7G5 it can also reset some devices (e.g. USB PHYs).
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-rstc
+              - atmel,at91sam9g45-rstc
+              - atmel,sama5d3-rstc
+              - microchip,sam9x60-rstc
+              - microchip,sama7g5-rstc
+      - items:
+          - const: atmel,sama5d3-rstc
+          - const: atmel,at91sam9g45-rstc
+
+  reg:
+    minItems: 1
+    items:
+      - description: base registers for system reset control
+      - description: registers for device specific reset control
+
+  clocks:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,sama7g5-rstc
+    then:
+      required:
+        - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+
+    reset-controller@fffffd00 {
+        compatible = "atmel,at91sam9260-rstc";
+        reg = <0xfffffd00 0x10>;
+        clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/berlin,reset.txt b/Documentation/devicetree/bindings/reset/berlin,reset.txt
deleted file mode 100644
index 514fee098b4b..000000000000
--- a/Documentation/devicetree/bindings/reset/berlin,reset.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Marvell Berlin reset controller
-===============================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller node must be a sub-node of the chip controller
-node on Berlin SoCs.
-
-Required properties:
-- compatible: should be "marvell,berlin2-reset"
-- #reset-cells: must be set to 2
-
-Example:
-
-chip_rst: reset {
-	compatible = "marvell,berlin2-reset";
-	#reset-cells = <2>;
-};
-
-&usb_phy0 {
-	resets = <&chip_rst 0x104 12>;
-};
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
deleted file mode 100644
index a6f8455ae6c4..000000000000
--- a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Bitmain BM1880 SoC Reset Controller
-===================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible:   Should be "bitmain,bm1880-reset"
-- reg:          Offset and length of reset controller space in SCTRL.
-- #reset-cells: Must be 1.
-
-Example:
-
-        rst: reset-controller@c00 {
-                compatible = "bitmain,bm1880-reset";
-                reg = <0xc00 0x8>;
-                #reset-cells = <1>;
-        };
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
new file mode 100644
index 000000000000..f0aca744388c
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Manivannan Sadhasivam <mani@kernel.org>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/bitmain,bm1880-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Bitmain BM1880 SoC Reset Controller
+
+maintainers:
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    const: bitmain,bm1880-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rst: reset-controller@c00 {
+        compatible = "bitmain,bm1880-reset";
+        reg = <0xc00 0x8>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
deleted file mode 100644
index ee59409640f2..000000000000
--- a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Broadcom STB SW_INIT-style reset controller
-===========================================
-
-Broadcom STB SoCs have a SW_INIT-style reset controller with separate
-SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
-reset lines.
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: should be brcm,brcmstb-reset
-- reg: register base and length
-- #reset-cells: must be set to 1
-
-Example:
-
-	reset: reset-controller@8404318 {
-		compatible = "brcm,brcmstb-reset";
-		reg = <0x8404318 0x30>;
-		#reset-cells = <1>;
-	};
-
-	&ethernet_switch {
-		resets = <&reset 26>;
-		reset-names = "switch";
-	};
diff --git a/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml
new file mode 100644
index 000000000000..e00efa88a198
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/brcm,brcmstb-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Broadcom STB SW_INIT-style reset controller
+
+description:
+  Broadcom STB SoCs have a SW_INIT-style reset controller with separate
+  SET/CLEAR/STATUS registers and possibly multiple banks, each of 32 bit
+  reset lines.
+
+  Please also refer to reset.txt in this directory for common reset
+  controller binding usage.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,brcmstb-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@8404318 {
+      compatible = "brcm,brcmstb-reset";
+      reg = <0x8404318 0x30>;
+      #reset-cells = <1>;
+    };
+
+    ethernet_switch {
+      resets = <&reset 26>;
+      reset-names = "switch";
+    };
diff --git a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
index 53e4ede9c0bd..ee8a2dcf5dfa 100644
--- a/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
+++ b/Documentation/devicetree/bindings/reset/canaan,k210-rst.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/canaan,k210-rst.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 Reset Controller Device Tree Bindings
+title: Canaan Kendryte K210 Reset Controller
 
 maintainers:
   - Damien Le Moal <damien.lemoal@wdc.com>
diff --git a/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
new file mode 100644
index 000000000000..0e5ee8decc0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/delta,tn48m-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD reset controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Reset controller modules provides resets for the following:
+  * 88F7040 SoC
+  * 88F6820 SoC
+  * 98DX3265 switch MAC-s
+  * 88E1680 PHY-s
+  * 88E1512 PHY
+  * PoE PSE controller
+
+properties:
+  compatible:
+    const: delta,tn48m-reset
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index b0c41ab1a746..cdfcf32c53fa 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -24,6 +24,11 @@ properties:
           - const: hisilicon,hi3670-reset
           - const: hisilicon,hi3660-reset
 
+  hisi,rst-syscon:
+    deprecated: true
+    description: phandle of the reset's syscon, use hisilicon,rst-syscon instead
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   hisilicon,rst-syscon:
     description: phandle of the reset's syscon.
     $ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
deleted file mode 100644
index ea0a6a9734c1..000000000000
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Hisilicon System Reset Controller
-======================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-The reset controller registers are part of the system-ctl block on
-hi6220 SoC.
-
-Required properties:
-- compatible: should be one of the following:
-  - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller.
-  - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller.
-  - "hisilicon,hi6220-aoctrl", "syscon" : For ao reset controller.
-- reg: should be register base and length as documented in the
-  datasheet
-- #reset-cells: 1, see below
-
-Example:
-sys_ctrl: sys_ctrl@f7030000 {
-	compatible = "hisilicon,hi6220-sysctrl", "syscon";
-	reg = <0x0 0xf7030000 0x0 0x2000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Specifying reset lines connected to IP modules
-==============================================
-example:
-
-        uart1: serial@..... {
-                ...
-                resets = <&sys_ctrl PERIPH_RSTEN3_UART1>;
-                ...
-        };
-
-The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>.
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.txt b/Documentation/devicetree/bindings/reset/lantiq,reset.txt
deleted file mode 100644
index c6aef36b7d15..000000000000
--- a/Documentation/devicetree/bindings/reset/lantiq,reset.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Lantiq XWAY SoC RCU reset controller binding
-============================================
-
-This binding describes a reset-controller found on the RCU module on Lantiq
-XWAY SoCs.
-
-This node has to be a sub node of the Lantiq RCU block.
-
--------------------------------------------------------------------------------
-Required properties:
-- compatible		: Should be one of
-				"lantiq,danube-reset"
-				"lantiq,xrx200-reset"
-- reg			: Defines the following sets of registers in the parent
-			  syscon device
-			- Offset of the reset set register
-			- Offset of the reset status register
-- #reset-cells		: Specifies the number of cells needed to encode the
-			  reset line, should be 2.
-			  The first cell takes the reset set bit and the
-			  second cell takes the status bit.
-
--------------------------------------------------------------------------------
-Example for the reset-controllers on the xRX200 SoCs:
-	reset0: reset-controller@10 {
-		compatible = "lantiq,xrx200-reset";
-		reg <0x10 0x04>, <0x14 0x04>;
-
-		#reset-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/lantiq,reset.yaml b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
new file mode 100644
index 000000000000..15d65a5dd631
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/lantiq,reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/lantiq,reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq XWAY SoC RCU reset controller
+
+maintainers:
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+description: |
+  This binding describes a reset-controller found on the RCU module on Lantiq
+  XWAY SoCs. This node has to be a sub node of the Lantiq RCU block.
+
+properties:
+  compatible:
+    enum:
+      - lantiq,danube-reset
+      - lantiq,xrx200-reset
+
+  reg:
+    description: |
+      Defines the following sets of registers in the parent syscon device
+      Offset of the reset set register
+      Offset of the reset status register
+    maxItems: 2
+
+  '#reset-cells':
+    description: |
+      The first cell takes the reset set bit and the second cell takes the
+      status bit.
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // On the xRX200 SoCs:
+    reset0: reset-controller@10 {
+        compatible = "lantiq,xrx200-reset";
+        reg = <0x10 0x04>, <0x14 0x04>;
+        #reset-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
new file mode 100644
index 000000000000..d71d0f0a13ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/marvell,berlin2-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Antoine Tenart <atenart@kernel.org>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/marvell,berlin2-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Marvell Berlin reset controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+  controller node on Berlin SoCs.
+
+properties:
+  compatible:
+    const: marvell,berlin2-reset
+
+  "#reset-cells":
+    const: 2
+
+required:
+  - compatible
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    chip: chip-control@ea0000 {
+        reg = <0xea0000 0x400>;
+
+        chip_rst: reset {
+            compatible = "marvell,berlin2-reset";
+            #reset-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
index 578bfa529b16..81cd8c837623 100644
--- a/Documentation/devicetree/bindings/reset/microchip,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml
@@ -57,4 +57,3 @@ examples:
         #reset-cells = <1>;
         cpu-syscon = <&cpu_ctrl>;
     };
-
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
deleted file mode 100644
index 17b7a6a43a29..000000000000
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Nuvoton NPCM Reset controller
-
-Required properties:
-- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
-- reg : specifies physical base address and size of the register.
-- #reset-cells: must be set to 2
-
-Optional property:
-- nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
-  NPCM7xx contain four software reset that represent numbers 1 to 4.
-
-  If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
-
-Example:
-	rstc: rstc@f0801000 {
-		compatible = "nuvoton,npcm750-reset";
-		reg = <0xf0801000 0x70>;
-		#reset-cells = <2>;
-		nuvoton,sw-reset-number = <2>;
-	};
-
-Specifying reset lines connected to IP NPCM7XX modules
-======================================================
-example:
-
-        spi0: spi@..... {
-                ...
-                resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
-                ...
-        };
-
-The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
new file mode 100644
index 000000000000..d82e65e37cc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm750-reset.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/nuvoton,npcm750-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Reset controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-reset        # Poleg NPCM7XX SoC
+      - nuvoton,npcm845-reset        # Arbel NPCM8XX SoC
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 2
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to access GCR registers.
+
+  nuvoton,sw-reset-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    description: |
+      Contains the software reset number to restart the SoC.
+      If not specified, software reset is disabled.
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+  - nuvoton,sysgcr
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+    rstc: rstc@f0801000 {
+        compatible = "nuvoton,npcm750-reset";
+        reg = <0xf0801000 0x70>;
+        #reset-cells = <2>;
+        nuvoton,sysgcr = <&gcr>;
+        nuvoton,sw-reset-number = <2>;
+    };
+
+    // Specifying reset lines connected to IP NPCM7XX modules
+    spi0: spi {
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
new file mode 100644
index 000000000000..9be60e55cd71
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qca,ar7100-reset.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2015 Alban Bedel <albeu@free.fr>
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/qca,ar7100-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qca,ar9132-reset
+          - qca,ar9331-reset
+      - const: qca,ar7100-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    reset-controller@1806001c {
+          compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+          reg = <0x1806001c 0x4>;
+          #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
index a054757f4d9f..d92e2b3cc83f 100644
--- a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm AOSS Reset Controller
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   The bindings describe the reset-controller found on AOSS-CC (always on
diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
index 831ea8d5d83f..ca5d79332189 100644
--- a/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
+++ b/Documentation/devicetree/bindings/reset/qcom,pdc-global.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PDC Global
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   The bindings describes the reset-controller found on PDC-Global (Power Domain
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index bbe313bf1796..0d1b89e2fe9c 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -49,6 +49,7 @@ properties:
       - renesas,r8a77995-rst      # R-Car D3
       - renesas,r8a779a0-rst      # R-Car V3U
       - renesas,r8a779f0-rst      # R-Car S4-8
+      - renesas,r8a779g0-rst      # R-Car V4H
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
index b13514e6783d..731b8ce01525 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L USBPHY Control
+title: Renesas RZ/{G2L,V2L} USBPHY Control
 
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
@@ -17,7 +17,9 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
           - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
+          - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
       - const: renesas,rzg2l-usbphy-ctrl
 
   reg:
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
deleted file mode 100644
index 32d8435a41df..000000000000
--- a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for the AXS10x reset controller
-
-This binding describes the ARC AXS10x boards custom IP-block which allows
-to control reset signals of selected peripherals. For example DW GMAC, etc...
-This block is controlled via memory-mapped register (AKA CREG) which
-represents up-to 32 reset lines.
-
-As of today only the following lines are used:
- - DW GMAC - line 5
-
-This binding uses the common reset binding[1].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-
-Required properties:
-- compatible: should be "snps,axs10x-reset".
-- reg: should always contain pair address - length: for creg reset
-  bits register.
-- #reset-cells: from common reset binding; Should always be set to 1.
-
-Example:
-	reset: reset-controller@11220 {
-		compatible = "snps,axs10x-reset";
-		#reset-cells = <1>;
-		reg = <0x11220 0x4>;
-	};
-
-Specifying reset lines connected to IP modules:
-	ethernet@.... {
-		....
-		resets = <&reset 5>;
-		....
-	};
diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
new file mode 100644
index 000000000000..a75db3d405af
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/snps,axs10x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXS10x reset controller
+
+maintainers:
+  - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+
+description: |
+  This binding describes the ARC AXS10x boards custom IP-block which allows
+  to control reset signals of selected peripherals. For example DW GMAC, etc...
+  This block is controlled via memory-mapped register (AKA CREG) which
+  represents up-to 32 reset lines.
+  As of today only the following lines are used:
+   - DW GMAC - line 5
+
+properties:
+  compatible:
+    const: snps,axs10x-reset
+
+  reg:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reset: reset-controller@11220 {
+        compatible = "snps,axs10x-reset";
+        #reset-cells = <1>;
+        reg = <0x11220 0x4>;
+    };
+
+    // Specifying reset lines connected to IP modules:
+    ethernet {
+        resets = <&reset 5>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt
deleted file mode 100644
index 38fe34fd8b8a..000000000000
--- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Altera SOCFPGA Reset Manager
-
-Required properties:
-- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10)
-	       "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC
-- reg : Should contain 1 register ranges(address and length)
-- altr,modrst-offset : Should contain the offset of the first modrst register.
-- #reset-cells: 1
-
-Example:
-	 rstmgr@ffd05000 {
-		#reset-cells = <1>;
-		compatible = "altr,rst-mgr";
-		reg = <0xffd05000 0x1000>;
-		altr,modrst-offset = <0x10>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
index bfbd3e9b4186..0a2c13e1e230 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-glue-reset.yaml
@@ -38,25 +38,49 @@ properties:
     minItems: 1
     maxItems: 2
 
-  clock-names:
-    oneOf:
-      - items:           # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:           # for others
-          - const: link
+  clock-names: true
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:           # for Pro4, Pro5
-          - const: gio
-          - const: link
-      - items:           # for others
-          - const: link
+  reset-names: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - socionext,uniphier-pro4-usb3-reset
+              - socionext,uniphier-pro5-usb3-reset
+              - socionext,uniphier-pro4-ahci-reset
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
index 377a7d242323..6566804ec567 100644
--- a/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.yaml
@@ -55,6 +55,9 @@ properties:
   "#reset-cells":
     const: 1
 
+  resets:
+    maxItems: 1
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
deleted file mode 100644
index 9ca27761f811..000000000000
--- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
-=============================================================================
-
-This binding describes a reset controller device that is used to enable and
-disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
-the STi family SoC system configuration registers.
-
-The actual action taken when softreset is asserted is hardware dependent.
-However, when asserted it may not be possible to access the hardware's
-registers and after an assert/deassert sequence the hardware's previous state
-may no longer be valid.
-
-Please refer to Documentation/devicetree/bindings/reset/reset.txt
-for common reset controller binding usage.
-
-Required properties:
-- compatible: Should be "st,stih407-picophyreset"
-- #reset-cells: 1, see below
-
-Example:
-
-	picophyreset: picophyreset-controller {
-		compatible = "st,stih407-picophyreset";
-		#reset-cells = <1>;
-	};
-
-Specifying picophyreset control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the picophyreset device node and an
-index specifying which channel to use, as described in
-Documentation/devicetree/bindings/reset/reset.txt.
-
-Example:
-
-	usb2_picophy0: usbpicophy@0 {
-		resets = <&picophyreset STIH407_PICOPHY0_RESET>;
-	};
-
-Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
deleted file mode 100644
index 92527138bc93..000000000000
--- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
-=============================================================================
-
-This binding describes a reset controller device that is used to enable and
-disable on-chip peripheral controllers such as USB and SATA, using
-"powerdown" control bits found in the STi family SoC system configuration
-registers. These have been grouped together into a single reset controller
-device for convenience.
-
-The actual action taken when powerdown is asserted is hardware dependent.
-However, when asserted it may not be possible to access the hardware's
-registers and after an assert/deassert sequence the hardware's previous state
-may no longer be valid.
-
-Please refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "st,stih407-powerdown"
-- #reset-cells: 1, see below
-
-example:
-
-	powerdown: powerdown-controller {
-		compatible = "st,stih407-powerdown";
-		#reset-cells = <1>;
-	};
-
-
-Specifying powerdown control of devices
-=======================================
-
-Device nodes should specify the reset channel required in their "resets"
-property, containing a phandle to the powerdown device node and an
-index specifying which channel to use, as described in reset.txt
-
-example:
-
-	st_dwc3: dwc3@8f94000 {
-		resets          = <&powerdown STIH407_USB3_POWERDOWN>,
-	};
-
-Macro definitions for the supported reset channels can be found in:
-
-include/dt-bindings/reset/stih407-resets.h
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
new file mode 100644
index 000000000000..329ae4ae1a10
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+
+maintainers:
+  - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+  the STi family SoC system configuration registers.
+
+  The actual action taken when softreset is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-picophyreset
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    picophyreset: picophyreset-controller {
+        compatible = "st,stih407-picophyreset";
+        #reset-cells = <1>;
+    };
+
+    // Specifying picophyreset control of devices
+    usb2_picophy0: usbpicophy {
+        resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
new file mode 100644
index 000000000000..d3790e602659
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-powerdown.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@st.com>
+
+description: |
+  This binding describes a reset controller device that is used to enable and
+  disable on-chip peripheral controllers such as USB and SATA, using
+  "powerdown" control bits found in the STi family SoC system configuration
+  registers. These have been grouped together into a single reset controller
+  device for convenience.
+
+  The actual action taken when powerdown is asserted is hardware dependent.
+  However, when asserted it may not be possible to access the hardware's
+  registers and after an assert/deassert sequence the hardware's previous state
+  may no longer be valid.
+
+properties:
+  compatible:
+    const: st,stih407-powerdown
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    powerdown: powerdown-controller {
+        compatible = "st,stih407-powerdown";
+        #reset-cells = <1>;
+    };
+
+    // Specifying powerdown control of devices:
+    st_dwc3: dwc3 {
+        resets = <&powerdown STIH407_USB3_POWERDOWN>;
+    };
diff --git a/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
index 300359a5e14b..2f5bd616b7ae 100644
--- a/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/reset/starfive,jh7100-reset.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: StarFive JH7100 SoC Reset Controller Device Tree Bindings
+title: StarFive JH7100 SoC Reset Controller
 
 maintainers:
   - Emil Renner Berthing <kernel@esmil.dk>
diff --git a/Documentation/devicetree/bindings/reset/sunplus,reset.yaml b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
new file mode 100644
index 000000000000..f24646ba9761
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/sunplus,reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/reset/sunplus,reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC Reset Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-reset
+
+  reg:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    rstc: reset@9c000054 {
+      compatible = "sunplus,sp7021-reset";
+      reg = <0x9c000054 0x28>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
new file mode 100644
index 000000000000..afc835eda0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/ti,tps380x-reset.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/ti,tps380x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS380x reset controller node bindings
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |
+  The TPS380x family [1] of supervisory circuits monitor supply voltages to
+  provide circuit initialization and timing supervision. The devices assert a
+  RESET signal if the voltage drops below a preset threshold or upon a manual
+  reset input (MR). The RESET output remains asserted for the factory
+  programmed delay after the voltage return above its threshold or after the
+  manual reset input is released.
+
+  [1] https://www.ti.com/product/TPS3801
+
+properties:
+  compatible:
+    enum:
+      - ti,tps3801
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the MR pin.
+
+  "#reset-cells":
+    const: 0
+
+required:
+  - compatible
+  - reset-gpios
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    reset: reset-controller {
+        compatible = "ti,tps3801";
+        #reset-cells = <0>;
+        reset-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml
index aa5fb64d57eb..90a7cabf58fe 100644
--- a/Documentation/devicetree/bindings/riscv/cpus.yaml
+++ b/Documentation/devicetree/bindings/riscv/cpus.yaml
@@ -9,6 +9,7 @@ title: RISC-V bindings for 'cpus' DT nodes
 maintainers:
   - Paul Walmsley <paul.walmsley@sifive.com>
   - Palmer Dabbelt <palmer@sifive.com>
+  - Conor Dooley <conor@kernel.org>
 
 description: |
   This document uses some terminology common to the RISC-V community
@@ -63,6 +64,11 @@ properties:
       - riscv,sv48
       - riscv,none
 
+  riscv,cbom-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbom cache operations.
+
   riscv,isa:
     description:
       Identifies the specific RISC-V instruction set architecture
@@ -74,9 +80,7 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
     $ref: "/schemas/types.yaml#/definitions/string"
-    enum:
-      - rv64imac
-      - rv64imafdc
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
@@ -99,6 +103,14 @@ properties:
       - compatible
       - interrupt-controller
 
+  cpu-idle-states:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 1
+    description: |
+      List of phandles to idle state nodes supported
+      by this hart (see ./idle-states.yaml).
+
 required:
   - riscv,isa
   - interrupt-controller
diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml
index 3f981e897126..714d0fcab399 100644
--- a/Documentation/devicetree/bindings/riscv/microchip.yaml
+++ b/Documentation/devicetree/bindings/riscv/microchip.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/riscv/microchip.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip PolarFire SoC-based boards device tree bindings
+title: Microchip PolarFire SoC-based boards
 
 maintainers:
-  - Cyril Jean <Cyril.Jean@microchip.com>
-  - Lewis Hanly <lewis.hanly@microchip.com>
+  - Conor Dooley <conor.dooley@microchip.com>
+  - Daire McNamara <daire.mcnamara@microchip.com>
 
 description:
   Microchip PolarFire SoC-based boards
@@ -17,10 +17,20 @@ properties:
   $nodename:
     const: '/'
   compatible:
-    items:
-      - enum:
-          - microchip,mpfs-icicle-kit
-      - const: microchip,mpfs
+    oneOf:
+      - items:
+          - enum:
+              - microchip,mpfs-icicle-reference-rtlv2203
+              - microchip,mpfs-icicle-reference-rtlv2210
+          - const: microchip,mpfs-icicle-kit
+          - const: microchip,mpfs
+
+      - items:
+          - enum:
+              - aries,m100pfsevp
+              - microchip,mpfs-sev-kit
+              - sundance,polarberry
+          - const: microchip,mpfs
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
index 2b1f91603897..bf3f07421f7e 100644
--- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
@@ -2,30 +2,27 @@
 # Copyright (C) 2020 SiFive, Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/riscv/sifive-l2-cache.yaml#
+$id: http://devicetree.org/schemas/riscv/sifive,ccache0.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SiFive L2 Cache Controller
+title: SiFive Composable Cache Controller
 
 maintainers:
   - Sagar Kadam <sagar.kadam@sifive.com>
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
 
 description:
-  The SiFive Level 2 Cache Controller is used to provide access to fast copies
-  of memory for masters in a Core Complex. The Level 2 Cache Controller also
+  The SiFive Composable Cache Controller is used to provide access to fast copies
+  of memory for masters in a Core Complex. The Composable Cache Controller also
   acts as directory-based coherency manager.
   All the properties in ePAPR/DeviceTree specification applies for this platform.
 
-allOf:
-  - $ref: /schemas/cache-controller.yaml#
-
 select:
   properties:
     compatible:
       contains:
         enum:
+          - sifive,ccache0
           - sifive,fu540-c000-ccache
           - sifive,fu740-c000-ccache
 
@@ -34,20 +31,26 @@ select:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-ccache
-          - sifive,fu740-c000-ccache
-      - const: cache
+    oneOf:
+      - items:
+          - enum:
+              - sifive,ccache0
+              - sifive,fu540-c000-ccache
+              - sifive,fu740-c000-ccache
+          - const: cache
+      - items:
+          - const: microchip,mpfs-ccache
+          - const: sifive,fu540-c000-ccache
+          - const: cache
 
   cache-block-size:
     const: 64
 
   cache-level:
-    const: 2
+    enum: [2, 3]
 
   cache-sets:
-    const: 1024
+    enum: [1024, 2048]
 
   cache-size:
     const: 2097152
@@ -73,25 +76,62 @@ properties:
       The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
       The reserved memory node should be defined as per the bindings in reserved-memory.txt.
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: sifive,fu540-c000-ccache
-
-then:
-  properties:
-    interrupts:
-      description: |
-        Must contain entries for DirError, DataError and DataFail signals.
-      maxItems: 3
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
 
-else:
-  properties:
-    interrupts:
-      description: |
-        Must contain entries for DirError, DataError, DataFail, DirFail signals.
-      minItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - microchip,mpfs-ccache
+
+    then:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError, DataFail, DirFail signals.
+          minItems: 4
+
+    else:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError and DataFail signals.
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,fu740-c000-ccache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+
+    else:
+      properties:
+        cache-sets:
+          const: 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,ccache0
+
+    then:
+      properties:
+        cache-level:
+          enum: [2, 3]
+
+    else:
+      properties:
+        cache-level:
+          const: 2
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
index 444be32a8a29..09c6c906b1f9 100644
--- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson Random number generator
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/rng/apm,rng.txt b/Documentation/devicetree/bindings/rng/apm,rng.txt
deleted file mode 100644
index 4dde4b06cdd9..000000000000
--- a/Documentation/devicetree/bindings/rng/apm,rng.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-APM X-Gene SoC random number generator.
-
-Required properties:
-
-- compatible  : should be "apm,xgene-rng"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- interrupts  : specify the fault interrupt for the RNG device
-
-Example:
-
-	rng: rng@10520000 {
-		compatible = "apm,xgene-rng";
-		reg = <0x0 0x10520000 0x0 0x100>;
-		interrupts =   <0x0 0x41 0x4>;
-		clocks = <&rngpkaclk 0>;
-	};
diff --git a/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml
new file mode 100644
index 000000000000..02be143cc829
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/apm,x-gene-rng.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/apm,x-gene-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC Random Number Generator
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-rng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rng@10520000 {
+            compatible = "apm,xgene-rng";
+            reg = <0x0 0x10520000 0x0 0x100>;
+            interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&rngpkaclk 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
new file mode 100644
index 000000000000..3ce45456d867
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/atmel,at91-trng.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/atmel,at91-trng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 True Random Number Generator
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91sam9g45-trng
+          - microchip,sam9x60-trng
+      - items:
+          - enum:
+              - microchip,sama7g5-trng
+          - const: atmel,at91sam9g45-trng
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rng@fffcc000 {
+        compatible = "atmel,at91sam9g45-trng";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&trng_clk>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/atmel-trng.txt b/Documentation/devicetree/bindings/rng/atmel-trng.txt
deleted file mode 100644
index 3900ee4f3532..000000000000
--- a/Documentation/devicetree/bindings/rng/atmel-trng.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Atmel TRNG (True Random Number Generator) block
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g45-trng" or "microchip,sam9x60-trng"
-- reg : Offset and length of the register set of this block
-- interrupts : the interrupt number for the TRNG block
-- clocks: should contain the TRNG clk source
-
-Example:
-
-trng@fffcc000 {
-	compatible = "atmel,at91sam9g45-trng";
-	reg = <0xfffcc000 0x4000>;
-	interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-	clocks = <&trng_clk>;
-};
diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt
deleted file mode 100644
index 802523196ee5..000000000000
--- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-HWRNG support for the iproc-rng200 driver
-
-Required properties:
-- compatible : Must be one of:
-	       "brcm,bcm2711-rng200"
-	       "brcm,bcm7211-rng200"
-	       "brcm,bcm7278-rng200"
-	       "brcm,iproc-rng200"
-- reg : base address and size of control register block
-
-Example:
-
-rng {
-        compatible = "brcm,iproc-rng200";
-        reg = <0x18032000 0x28>;
-};
diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml
new file mode 100644
index 000000000000..a00e9bc8b609
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/rng/brcm,iproc-rng200.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: HWRNG support for the iproc-rng200 driver
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2711-rng200
+      - brcm,bcm7211-rng200
+      - brcm,bcm7278-rng200
+      - brcm,iproc-rng200
+
+  reg:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@18032000 {
+        compatible = "brcm,iproc-rng200";
+        reg = <0x18032000 0x28>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
index 61963fa9347e..067e71e8ebe8 100644
--- a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
@@ -33,4 +33,3 @@ examples:
       compatible = "intel,ixp46x-rng";
       reg = <0x70002100 4>;
     };
-
diff --git a/Documentation/devicetree/bindings/rng/ks-sa-rng.txt b/Documentation/devicetree/bindings/rng/ks-sa-rng.txt
deleted file mode 100644
index b7a65b487901..000000000000
--- a/Documentation/devicetree/bindings/rng/ks-sa-rng.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Keystone SoC Hardware Random Number Generator(HWRNG) Module
-
-On Keystone SoCs HWRNG module is a submodule of the Security Accelerator.
-
-- compatible: should be "ti,keystone-rng"
-- ti,syscon-sa-cfg: phandle to syscon node of the SA configuration registers.
-		    This registers are shared between hwrng and crypto drivers.
-- clocks: phandle to the reference clocks for the subsystem
-- clock-names: functional clock name. Should be set to "fck"
-- reg: HWRNG module register space
-
-Example:
-/* K2HK */
-
-rng@24000 {
-	compatible = "ti,keystone-rng";
-	ti,syscon-sa-cfg = <&sa_config>;
-	clocks = <&clksa>;
-	clock-names = "fck";
-	reg = <0x24000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt
deleted file mode 100644
index 65c04172fc8c..000000000000
--- a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-NPCM SoC Random Number Generator
-
-Required properties:
-- compatible  : "nuvoton,npcm750-rng" for the NPCM7XX BMC.
-- reg         : Specifies physical base address and size of the registers.
-
-Example:
-
-rng: rng@f000b000 {
-	compatible = "nuvoton,npcm750-rng";
-	reg = <0xf000b000 0x8>;
-};
diff --git a/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml
new file mode 100644
index 000000000000..abd134c9d400
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/nuvoton,npcm-rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/nuvoton,npcm-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM SoC Random Number Generator
+
+maintainers:
+  - Avi Fishman <avifishman70@gmail.com>
+  - Tomer Maimon <tmaimon77@gmail.com>
+  - Tali Perry <tali.perry1@gmail.com>
+  - Patrick Venture <venture@google.com>
+  - Nancy Yuen <yuenn@google.com>
+  - Benjamin Fair <benjaminfair@google.com>
+
+properties:
+  compatible:
+    const: nuvoton,npcm750-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f000b000 {
+        compatible = "nuvoton,npcm750-rng";
+        reg = <0xf000b000 0x8>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt b/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
deleted file mode 100644
index f315c9723bd2..000000000000
--- a/Documentation/devicetree/bindings/rng/omap3_rom_rng.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-OMAP ROM RNG driver binding
-
-Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does. The
-implementation can depend on the SoC secure ROM used.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be "nokia,n900-rom-rng"
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the the RNG interface clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ick"
-
-Example:
-
-	rom_rng: rng {
-		compatible = "nokia,n900-rom-rng";
-		clocks = <&rng_ick>;
-		clock-names = "ick";
-	};
diff --git a/Documentation/devicetree/bindings/rng/omap_rng.yaml b/Documentation/devicetree/bindings/rng/omap_rng.yaml
index 010188cdbec8..ccf54fae8302 100644
--- a/Documentation/devicetree/bindings/rng/omap_rng.yaml
+++ b/Documentation/devicetree/bindings/rng/omap_rng.yaml
@@ -53,17 +53,6 @@ allOf:
       required:
         - interrupts
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - inside-secure,safexcel-eip76
-
-    then:
-      required:
-        - clocks
-
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
index a50c34d5d199..765d9f9edd6e 100644
--- a/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
+++ b/Documentation/devicetree/bindings/rng/samsung,exynos5250-trng.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung Exynos SoC True Random Number Generator
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Łukasz Stelmach <l.stelmach@samsung.com>
 
 properties:
diff --git a/Documentation/devicetree/bindings/rng/st,rng.txt b/Documentation/devicetree/bindings/rng/st,rng.txt
deleted file mode 100644
index 35734bc282e9..000000000000
--- a/Documentation/devicetree/bindings/rng/st,rng.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-STMicroelectronics HW Random Number Generator
-----------------------------------------------
-
-Required parameters:
-compatible	: Should be "st,rng"
-reg		: Base address and size of IP's register map.
-clocks		: Phandle to device's clock (See: ../clocks/clock-bindings.txt)
-
-Example:
-
-rng@fee80000 {
-	compatible      = "st,rng";
-	reg		= <0xfee80000 0x1000>;
-	clocks          = <&clk_sysin>;
-}
diff --git a/Documentation/devicetree/bindings/rng/st,rng.yaml b/Documentation/devicetree/bindings/rng/st,rng.yaml
new file mode 100644
index 000000000000..ff1211ef9046
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,rng.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/st,rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Hardware Random Number Generator
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,rng
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@fee80000 {
+        compatible = "st,rng";
+        reg = <0xfee80000 0x1000>;
+        clocks = <&clk_sysin>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
index 9a6e4eaf4d3c..fcd86f822a9c 100644
--- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
@@ -27,6 +27,7 @@ properties:
     maxItems: 1
 
   clock-error-detect:
+    type: boolean
     description: If set enable the clock detection management
 
 required:
diff --git a/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml
new file mode 100644
index 000000000000..e749818fc193
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ti,keystone-rng.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,keystone-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone SoC Hardware Random Number Generator
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+  - Santosh Shilimkar <ssantosh@kernel.org>
+
+properties:
+  compatible:
+    const: ti,keystone-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
+  reg:
+    maxItems: 1
+
+  ti,syscon-sa-cfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: |
+      Phandle to syscon node of the SA configuration registers.  These
+      registers are shared between HWRNG and crypto drivers.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - ti,syscon-sa-cfg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@24000 {
+        compatible = "ti,keystone-rng";
+        ti,syscon-sa-cfg = <&sa_config>;
+        clocks = <&clksa>;
+        clock-names = "fck";
+        reg = <0x24000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml
new file mode 100644
index 000000000000..9a58440b1ab1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/ti,omap-rom-rng.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/ti,omap-rom-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OMAP ROM Random Number Generator
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Secure SoCs may provide RNG via secure ROM calls like Nokia N900 does.
+  The implementation can depend on the SoC secure ROM used.
+
+properties:
+  compatible:
+    const: nokia,n900-rom-rng
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ick
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng {
+        compatible = "nokia,n900-rom-rng";
+        clocks = <&rng_ick>;
+        clock-names = "ick";
+    };
diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt
deleted file mode 100644
index fb4846160047..000000000000
--- a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-HWRNG support for the timeriomem_rng driver
-
-Required properties:
-- compatible : "timeriomem_rng"
-- reg : base address to sample from
-- period : wait time in microseconds to use between samples
-
-Optional properties:
-- quality : estimated number of bits of true entropy per 1024 bits read from the
-            rng.  Defaults to zero which causes the kernel's default quality to
-            be used instead.  Note that the default quality is usually zero
-            which disables using this rng to automatically fill the kernel's
-            entropy pool.
-
-N.B. currently 'reg' must be at least four bytes wide and 32-bit aligned
-
-Example:
-
-hwrng@44 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "timeriomem_rng";
-	reg = <0x44 0x04>;
-	period = <1000000>;
-};
diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml
new file mode 100644
index 000000000000..4754174e9849
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/timeriomem_rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TimerIO Random Number Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: timeriomem_rng
+
+  period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: wait time in microseconds to use between samples
+
+  quality:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Estimated number of bits of true entropy per 1024 bits read from the rng.
+      Defaults to zero which causes the kernel's default quality to be used
+      instead.  Note that the default quality is usually zero which disables
+      using this rng to automatically fill the kernel's entropy pool.
+
+  reg:
+    maxItems: 1
+    description:
+      Base address to sample from. Currently 'reg' must be at least four bytes
+      wide and 32-bit aligned.
+
+required:
+  - compatible
+  - period
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@44 {
+        compatible = "timeriomem_rng";
+        reg = <0x44 0x04>;
+        period = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
index 478b0234e8fa..dede49431733 100644
--- a/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/allwinner,sun4i-a10-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 RTC Device Tree Bindings
+title: Allwinner A10 RTC
 
 allOf:
   - $ref: "rtc.yaml#"
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
index beeb90e55727..04947e166cef 100644
--- a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/allwinner,sun6i-a31-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 RTC Device Tree Bindings
+title: Allwinner A31 RTC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -16,16 +16,22 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun6i-a31-rtc
-      - const: allwinner,sun8i-a23-rtc
-      - const: allwinner,sun8i-h3-rtc
-      - const: allwinner,sun8i-r40-rtc
-      - const: allwinner,sun8i-v3-rtc
-      - const: allwinner,sun50i-h5-rtc
+      - enum:
+          - allwinner,sun6i-a31-rtc
+          - allwinner,sun8i-a23-rtc
+          - allwinner,sun8i-h3-rtc
+          - allwinner,sun8i-r40-rtc
+          - allwinner,sun8i-v3-rtc
+          - allwinner,sun50i-h5-rtc
+          - allwinner,sun50i-h6-rtc
+          - allwinner,sun50i-h616-rtc
+          - allwinner,sun50i-r329-rtc
       - items:
           - const: allwinner,sun50i-a64-rtc
           - const: allwinner,sun8i-h3-rtc
-      - const: allwinner,sun50i-h6-rtc
+      - items:
+          - const: allwinner,sun20i-d1-rtc
+          - const: allwinner,sun50i-r329-rtc
 
   reg:
     maxItems: 1
@@ -37,7 +43,12 @@ properties:
       - description: RTC Alarm 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
 
   clock-output-names:
     minItems: 1
@@ -60,7 +71,6 @@ allOf:
     then:
       properties:
         clock-output-names:
-          minItems: 1
           maxItems: 1
 
   - if:
@@ -85,49 +95,89 @@ allOf:
             enum:
               - allwinner,sun8i-h3-rtc
               - allwinner,sun50i-h5-rtc
+              - allwinner,sun50i-h6-rtc
 
     then:
       properties:
         clock-output-names:
           minItems: 3
-          maxItems: 3
 
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-h6-rtc
+            const: allwinner,sun50i-h616-rtc
 
     then:
       properties:
-        clock-output-names:
+        clocks:
+          items:
+            - description: Bus clock for register access
+            - description: 24 MHz oscillator
+            - description: 32 kHz clock from the CCU
+
+        clock-names:
+          items:
+            - const: bus
+            - const: hosc
+            - const: pll-32k
+
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-r329-rtc
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: Bus clock for register access
+            - description: 24 MHz oscillator
+            - description: AHB parent for internal SPI clock
+            - description: External 32768 Hz oscillator
+
+        clock-names:
           minItems: 3
-          maxItems: 3
+          items:
+            - const: bus
+            - const: hosc
+            - const: ahb
+            - const: ext-osc32k
+
+      required:
+        - clocks
+        - clock-names
 
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-r40-rtc
+            enum:
+              - allwinner,sun8i-r40-rtc
+              - allwinner,sun50i-h616-rtc
+              - allwinner,sun50i-r329-rtc
 
     then:
       properties:
         interrupts:
-          minItems: 1
           maxItems: 1
 
     else:
       properties:
         interrupts:
           minItems: 2
-          maxItems: 2
 
 required:
   - "#clock-cells"
   - compatible
   - reg
   - interrupts
-  - clock-output-names
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
index 994de43d17fa..0e5f0fcc26b0 100644
--- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/atmel,at91rm9200-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atmel AT91 RTC Device Tree Bindings
+title: Atmel AT91 RTC
 
 allOf:
   - $ref: "rtc.yaml#"
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
deleted file mode 100644
index 3f0e2a5950eb..000000000000
--- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Atmel AT91SAM9260 Real Time Timer
-
-Required properties:
-- compatible: should be one of the following:
-	- "atmel,at91sam9260-rtt"
-	- "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"
-- reg: should encode the memory region of the RTT controller
-- interrupts: rtt alarm/event interrupt
-- clocks: should contain the 32 KHz slow clk that will drive the RTT block.
-- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store
-	the time base when the RTT is used as an RTC.
-	The first cell should point to the GPBR node and the second one
-	encode the offset within the GPBR block (or in other words, the
-	GPBR register used to store the time base).
-
-
-Example:
-
-rtt@fffffd20 {
-	compatible = "atmel,at91sam9260-rtt";
-	reg = <0xfffffd20 0x10>;
-	interrupts = <1 4 7>;
-	clocks = <&clk32k>;
-	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
new file mode 100644
index 000000000000..b5cd20e89daf
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/atmel,at91sam9260-rtt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 RTT
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: atmel,at91sam9260-rtt
+      - items:
+          - const: microchip,sam9x60-rtt
+          - const: atmel,at91sam9260-rtt
+      - items:
+          - const: microchip,sama7g5-rtt
+          - const: microchip,sam9x60-rtt
+          - const: atmel,at91sam9260-rtt
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  atmel,rtt-rtc-time-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the GPBR node.
+          - description: Offset within the GPBR block.
+    description:
+      Should encode the GPBR register used to store the time base when the
+      RTT is used as an RTC. The first cell should point to the GPBR node
+      and the second one encodes the offset within the GPBR block (or in
+      other words, the GPBR register used to store the time base).
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - atmel,rtt-rtc-time-reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc@fffffd20 {
+        compatible = "atmel,at91sam9260-rtt";
+        reg = <0xfffffd20 0x10>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&clk32k>;
+        atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
deleted file mode 100644
index d946f28502b3..000000000000
--- a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Broadcom STB wake-up Timer
-
-The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
-ability to wake up the system from low-power suspend/standby modes.
-
-Required properties:
-- compatible     : should contain "brcm,brcmstb-waketimer"
-- reg            : the register start and length for the WKTMR block
-- interrupts     : The TIMER interrupt
-- clocks	 : The phandle to the UPG fixed clock (27Mhz domain)
-
-Example:
-
-waketimer@f0411580 {
-	compatible = "brcm,brcmstb-waketimer";
-	reg = <0xf0411580 0x14>;
-	interrupts = <0x3>;
-	interrupt-parent = <&aon_pm_l2_intc>;
-	clocks = <&upg_fixed>;
-};
diff --git a/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml
new file mode 100644
index 000000000000..9fe079917a98
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/brcm,brcmstb-waketimer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB wake-up Timer
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
+  ability to wake up the system from low-power suspend/standby modes.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    const: brcm,brcmstb-waketimer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: the TIMER interrupt
+    maxItems: 1
+
+  clocks:
+    description: clock reference in the 27MHz domain
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc@f0411580 {
+        compatible = "brcm,brcmstb-waketimer";
+        reg = <0xf0411580 0x14>;
+        interrupts = <0x3>;
+        interrupt-parent = <&aon_pm_l2_intc>;
+        clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
index 29fe39bb08ad..d12855e7ffd7 100644
--- a/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
+++ b/Documentation/devicetree/bindings/rtc/epson,rx8900.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - epson,rx8804
       - epson,rx8900
       - microcrystal,rv8803
 
diff --git a/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml
new file mode 100644
index 000000000000..8c102b70d735
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/fsl,scu-rtc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/fsl,scu-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - RTC bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-sc-rtc
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    rtc {
+        compatible = "fsl,imx8qxp-sc-rtc";
+    };
diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
new file mode 100644
index 000000000000..7742465b9383
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml#
+
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Soc (MPFS) RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+  - Lewis Hanly <lewis.hanly@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: |
+          RTC_WAKEUP interrupt
+      - description: |
+          RTC_MATCH, asserted when the content of the Alarm register is equal
+          to that of the RTC's count register.
+
+  clocks:
+    items:
+      - description: |
+          AHB clock
+      - description: |
+          Reference clock: divided by the prescaler to create a time-based
+          strobe (typically 1 Hz) for the calendar counter. By default, the rtc
+          on the PolarFire SoC shares it's reference with MTIMER so this will
+          be a 1 MHz clock.
+
+  clock-names:
+    items:
+      - const: rtc
+      - const: rtcref
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    rtc@20124000 {
+        compatible = "microchip,mpfs-rtc";
+        reg = <0x20124000 0x1000>;
+        clocks = <&clkcfg CLK_RTC>, <&clkcfg CLK_RTCREF>;
+        clock-names = "rtc", "rtcref";
+        interrupts = <80>, <81>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index 9593840a4a2b..dd6eebf06ea6 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/microcrystal,rv3032.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip RV-3032 RTC Device Tree Bindings
+title: Microchip RV-3032 RTC
 
 allOf:
   - $ref: "rtc.yaml#"
@@ -32,6 +32,7 @@ properties:
       - 11000
 
   trickle-voltage-millivolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 1750
       - 3000
diff --git a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
index 114199cf4d28..585c185d1eb3 100644
--- a/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/mstar,msc313-rtc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/rtc/mstar,msc313-rtc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mstar MSC313e RTC Device Tree Bindings
+title: Mstar MSC313e RTC
 
 allOf:
   - $ref: "rtc.yaml#"
diff --git a/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
new file mode 100644
index 000000000000..7a1857f5caa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,nct3018y.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NUVOTON NCT3018Y Real Time Clock
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Medad CChien <ctcchien@nuvoton.com>
+  - Mia Lin <mimi05633@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,nct3018y
+
+  reg:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "nuvoton,nct3018y";
+            reg = <0x6f>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
deleted file mode 100644
index 6439682c9319..000000000000
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* NXP PCF85063 Real Time Clock
-
-Required properties:
-- compatible: Should one of contain:
-	"nxp,pcf85063",
-	"nxp,pcf85063a",
-	"nxp,pcf85063tp",
-	"microcrystal,rv8263"
-- reg: I2C address for chip.
-
-Optional property:
-- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
-  expressed in femto Farad (fF). Valid values are 7000 and 12500.
-  Default value (if no value is specified) is 7000fF.
-
-Optional child node:
-- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
-
-Example:
-
-pcf85063: rtc@51 {
-	compatible = "nxp,pcf85063";
-	reg = <0x51>;
-	quartz-load-femtofarads = <12500>;
-
-		clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-};
diff --git a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
new file mode 100644
index 000000000000..2f892f8640d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF85063 Real Time Clock
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+properties:
+  compatible:
+    enum:
+      - microcrystal,rv8263
+      - nxp,pcf85063
+      - nxp,pcf85063a
+      - nxp,pcf85063tp
+      - nxp,pca85073a
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [7000, 12500]
+    default: 7000
+
+  clock:
+    $ref: /schemas/clock/fixed-clock.yaml
+    description:
+      Provide this if the square wave pin is used as boot-enabled
+      fixed clock.
+
+  wakeup-source: true
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microcrystal,rv8263
+    then:
+      properties:
+        quartz-load-femtofarads: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pcf85063
+    then:
+      properties:
+        quartz-load-femtofarads:
+          const: 7000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+          compatible = "nxp,pcf85063a";
+          reg = <0x51>;
+          quartz-load-femtofarads = <12500>;
+
+          clock {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <32768>;
+          };
+        };
+      };
diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
index 4fba6dba16f3..23ab5bb4f395 100644
--- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PM8xxx PMIC RTC device
 
 maintainers:
-  - Satya Priya <skakit@codeaurora.org>
+  - Satya Priya <quic_c_skakit@quicinc.com>
 
 properties:
   compatible:
@@ -19,7 +19,14 @@ properties:
       - qcom,pmk8350-rtc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: rtc
+      - const: alarm
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
new file mode 100644
index 000000000000..2d4741f51663
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/renesas,rzn1-rtc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/renesas,rzn1-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 SoCs Real-Time Clock DT bindings
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-rtc
+      - const: renesas,rzn1-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: alarm
+      - const: timer
+      - const: pps
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hclk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    rtc@40006000 {
+       compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+       reg = <0x40006000 0x1000>;
+       interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+                    <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+                    <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+       interrupt-names = "alarm", "timer", "pps";
+       clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+       clock-names = "hclk";
+       power-domains = <&sysctrl>;
+       start-year = <2000>;
+     };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
deleted file mode 100644
index 36f610bb051e..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Dallas DS1307 and compatible RTC
-
-Required properties:
-- compatible: should be one of:
-	"dallas,ds1307",
-	"dallas,ds1308",
-	"dallas,ds1337",
-	"dallas,ds1338",
-	"dallas,ds1339",
-	"dallas,ds1388",
-	"dallas,ds1340",
-	"dallas,ds1341",
-	"maxim,ds3231",
-	"st,m41t0",
-	"st,m41t00",
-	"st,m41t11",
-	"microchip,mcp7940x",
-	"microchip,mcp7941x",
-	"pericom,pt7c4338",
-	"epson,rx8025",
-	"isil,isl12057"
-	"epson,rx8130"
-- reg: I2C bus address of the device
-
-Optional properties:
-- interrupts: rtc alarm interrupt.
-- clock-output-names: From common clock binding to override the default output
-                      clock name
-- wakeup-source: Enables wake up of host system on alarm
-- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only
-	Selected resistor for trickle charger
-	Possible values are 250, 2000, 4000
-	Should be given if trickle charger should be enabled
-- aux-voltage-chargeable: ds1339, ds1340, ds1388 and rx8130 only
-	Tells whether the battery/supercap of the RTC (if any) is
-	chargeable or not.
-	Possible values are 0 (not chargeable), 1 (chargeable)
-
-Deprecated properties:
-- trickle-diode-disable : ds1339, ds1340 and ds1388 only
-	Do not use internal trickle charger diode
-	Should be given if internal trickle charger diode should be disabled
-	(superseded by aux-voltage-chargeable)
-
-Example:
-	ds1339: rtc@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 0>;
-		trickle-resistor-ohms = <250>;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml b/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml
new file mode 100644
index 000000000000..98d10e680144
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/rtc-ds1307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dallas DS1307 and compatible RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dallas,ds1307
+          - dallas,ds1308
+          - dallas,ds1337
+          - dallas,ds1338
+          - dallas,ds1339
+          - dallas,ds1388
+          - dallas,ds1340
+          - dallas,ds1341
+          - maxim,ds3231
+          - st,m41t0
+          - st,m41t00
+          - st,m41t11
+          - microchip,mcp7940x
+          - microchip,mcp7941x
+          - pericom,pt7c4338
+          - epson,rx8025
+          - isil,isl12057
+          - epson,rx8130
+
+      - items:
+          - enum:
+              - st,m41t00
+          - const: dallas,ds1338
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    description: From common clock binding to override the default output clock name.
+
+  wakeup-source:
+    description: Enables wake up of host system on alarm.
+
+  vcc-supply: true
+
+allOf:
+  - $ref: rtc.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,ds1339
+              - dallas,ds1340
+              - dallas,ds1388
+    then:
+      properties:
+        trickle-resistor-ohms:
+          description: Selected resistor for trickle charger. Should be specified if trickle
+            charger should be enabled.
+          enum: [ 250, 2000, 4000 ]
+
+        trickle-diode-disable:
+          description: Do not use internal trickle charger diode. Should be given if internal
+            trickle charger diode should be disabled (superseded by aux-voltage-chargeable)
+          deprecated: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtc@68 {
+        compatible = "dallas,ds1337";
+        reg = <0x68>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <20 0>;
+        trickle-resistor-ohms = <250>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
index 55a0c8874c03..7212076a8f1b 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -14,6 +14,8 @@ For MediaTek PMIC wrapper bus bindings, see:
 Required properties:
 - compatible: Should be one of follows
        "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6358-rtc": for MT6358 PMIC
+       "mediatek,mt6366-rtc", "mediatek,mt6358-rtc": for MT6366 PMIC
        "mediatek,mt6397-rtc": for MT6397 PMIC
 
 Example:
diff --git a/Documentation/devicetree/bindings/rtc/rtc.txt b/Documentation/devicetree/bindings/rtc/rtc.txt
deleted file mode 100644
index b8d36fce5e2d..000000000000
--- a/Documentation/devicetree/bindings/rtc/rtc.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to rtc.yaml.
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 2359f541b770..764717ce1873 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -127,6 +127,7 @@ examples:
       st,syscfg = <&pwrcfg 0x00 0x100>;
     };
 
+  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     rtc@5c004000 {
diff --git a/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml b/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml
new file mode 100644
index 000000000000..fd1b3e71ff2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sunplus,sp7021-rtc.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/sunplus,sp7021-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Real Time Clock controller
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-rtc
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: rtc
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rtc: serial@9c003a00 {
+        compatible = "sunplus,sp7021-rtc";
+        reg = <0x9c003a00 0x80>;
+        reg-names = "rtc";
+        clocks = <&clkc 0x12>;
+        resets = <&rstc 0x02>;
+        interrupt-parent = <&intc>;
+        interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
new file mode 100644
index 000000000000..d995ef04a6eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,k3-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Real Time Clock
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  This RTC appears in the AM62x family of SoCs.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,am62-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VBUS Interface clock
+      - description: 32k Clock source (external or internal).
+
+  clock-names:
+    items:
+      - const: vbus
+      - const: osc32k
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2b1f0000 {
+        compatible = "ti,am62-rtc";
+        reg = <0x2b1f0000 0x100>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&bar 0>;
+        clocks = <&foo 0>, <&foo 1>;
+        clock-names = "vbus", "osc32k";
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index 13925bb78ec7..d9fc120c61cc 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -30,6 +30,8 @@ properties:
       - dallas,ds1672
       # Extremely Accurate I²C RTC with Integrated Crystal and SRAM
       - dallas,ds3232
+      # EM Microelectronic EM3027 RTC
+      - emmicro,em3027
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
       - epson,rx8010
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
diff --git a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
index bdb72d3ddf2a..7ed0230f6c67 100644
--- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@@ -23,8 +23,15 @@ properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
   interrupts:
-    minItems: 2
+    maxItems: 2
 
   interrupt-names:
     items:
@@ -39,6 +46,7 @@ properties:
     minimum: 0x1
     maximum: 0x1FFFFF
     default: 0x198233
+    deprecated: true
 
 required:
   - compatible
@@ -61,5 +69,7 @@ examples:
         interrupts = <0 26 4>, <0 27 4>;
         interrupt-names = "alarm", "sec";
         calibration = <0x198233>;
+        clock-names = "rtc";
+        clocks = <&rtc_clk>;
       };
     };
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 3bab2f27b970..6258f5f59b19 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -62,6 +62,7 @@ properties:
       - const: mrvl,pxa-uart
       - const: nuvoton,wpcm450-uart
       - const: nuvoton,npcm750-uart
+      - const: nuvoton,npcm845-uart
       - const: nvidia,tegra20-uart
       - const: nxp,lpc3220-uart
       - items:
@@ -138,6 +139,7 @@ properties:
     description: The current active speed of the UART.
 
   reg-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       Offset to apply to the mapbase from the start of the registers.
 
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 7487aa6ef849..7822705ad16c 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SoC UART Serial Interface
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson SoC UART Serial Interface is present on a large range
@@ -29,6 +29,7 @@ properties:
               - amlogic,meson8-uart
               - amlogic,meson8b-uart
               - amlogic,meson-gx-uart
+              - amlogic,meson-s4-uart
           - const: amlogic,meson-ao-uart
       - description: Everything-Else power domain UART controller
         enum:
@@ -36,6 +37,7 @@ properties:
           - amlogic,meson8-uart
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
+          - amlogic,meson-s4-uart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
new file mode 100644
index 000000000000..30b2131b5860
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+maintainers:
+  - Richard Genoud <richard.genoud@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,at91rm9200-usart
+          - atmel,at91sam9260-usart
+          - microchip,sam9x60-usart
+      - items:
+          - const: atmel,at91rm9200-dbgu
+          - const: atmel,at91rm9200-usart
+      - items:
+          - const: atmel,at91sam9260-dbgu
+          - const: atmel,at91sam9260-usart
+      - items:
+          - const: microchip,sam9x60-dbgu
+          - const: microchip,sam9x60-usart
+          - const: atmel,at91sam9260-dbgu
+          - const: atmel,at91sam9260-usart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: usart
+      - const: gclk
+
+  clocks:
+    minItems: 1
+    items:
+      - description: USART Peripheral Clock
+      - description: USART Generic Clock
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,usart-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Must be either <AT91_USART_MODE_SPI> for SPI or
+      <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
+    enum: [ 0, 1 ]
+
+  atmel,use-dma-rx:
+    type: boolean
+    description: use of PDC or DMA for receiving data
+
+  atmel,use-dma-tx:
+    type: boolean
+    description: use of PDC or DMA for transmitting data
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum number of data the RX and TX FIFOs can store for FIFO
+      capable USARTS.
+    enum: [ 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - atmel,usart-mode
+
+allOf:
+  - if:
+      properties:
+        atmel,usart-mode:
+          const: 1
+    then:
+      allOf:
+        - $ref: /schemas/spi/spi-controller.yaml#
+
+      properties:
+        atmel,use-dma-rx: false
+
+        atmel,use-dma-tx: false
+
+        atmel,fifo-size: false
+
+        "#size-cells":
+          const: 0
+
+        "#address-cells":
+          const: 1
+
+      required:
+        - "#size-cells"
+        - "#address-cells"
+
+    else:
+      allOf:
+        - $ref: /schemas/serial/serial.yaml#
+        - $ref: /schemas/serial/rs485.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* use PDC */
+    usart0: serial@fff8c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xfff8c000 0x4000>;
+        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+        interrupts = <7>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        atmel,use-dma-rx;
+        atmel,use-dma-tx;
+        rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+        cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+        dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+        dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+        dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+        rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* use DMA */
+    usart1: serial@f001c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xf001c000 0x100>;
+        atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        atmel,use-dma-rx;
+        atmel,use-dma-tx;
+        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+        dma-names = "tx", "rx";
+        atmel,fifo-size = <32>;
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/at91-usart.h>
+    #include <dt-bindings/dma/at91.h>
+
+    /* SPI mode */
+    spi0: spi@f001c000 {
+        compatible = "atmel,at91sam9260-usart";
+        reg = <0xf001c000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        atmel,usart-mode = <AT91_USART_MODE_SPI>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+        clocks = <&usart0_clk>;
+        clock-names = "usart";
+        dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+               <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+        dma-names = "tx", "rx";
+        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
index fcdbe6f87e98..876b8cf1cafb 100644
--- a/Documentation/devicetree/bindings/serial/cdns,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serial/cdns,uart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cadence UART Controller Device Tree Bindings
+title: Cadence UART Controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
deleted file mode 100644
index 4f8d8fde0c1c..000000000000
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Energymicro efm32 UART
-
-Required properties:
-- compatible : Should be "energymicro,efm32-uart"
-- reg : Address and length of the register set
-- interrupts : Should contain uart interrupt
-
-Optional properties:
-- energymicro,location : Decides the location of the USART I/O pins.
-  Allowed range : [0 .. 5]
-  Default: 0
-
-Example:
-
-uart@4000c400 {
-	compatible = "energymicro,efm32-uart";
-	reg = <0x4000c400 0x400>;
-	interrupts = <15>;
-	energymicro,location = <0>;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index a90c971b4f1f..30eaa62e1aed 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -20,10 +20,18 @@ properties:
           - fsl,ls1021a-lpuart
           - fsl,ls1028a-lpuart
           - fsl,imx7ulp-lpuart
-          - fsl,imx8qm-lpuart
+          - fsl,imx8qxp-lpuart
+          - fsl,imxrt1050-lpuart
       - items:
-          - const: fsl,imx8qxp-lpuart
+          - enum:
+              - fsl,imx93-lpuart
+              - fsl,imx8ulp-lpuart
           - const: fsl,imx7ulp-lpuart
+      - items:
+          - enum:
+              - fsl,imx8qm-lpuart
+              - fsl,imx8dxl-lpuart
+          - const: fsl,imx8qxp-lpuart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
new file mode 100644
index 000000000000..fe098d98af6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+description: |
+  The MediaTek UART is based on the basic 8250 UART and compatible
+  with 16550A, with enhancements for high speed baud rates and
+  support for DMA.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-uart
+      - items:
+          - enum:
+              - mediatek,mt2701-uart
+              - mediatek,mt2712-uart
+              - mediatek,mt6580-uart
+              - mediatek,mt6582-uart
+              - mediatek,mt6589-uart
+              - mediatek,mt6755-uart
+              - mediatek,mt6765-uart
+              - mediatek,mt6779-uart
+              - mediatek,mt6795-uart
+              - mediatek,mt6797-uart
+              - mediatek,mt7622-uart
+              - mediatek,mt7623-uart
+              - mediatek,mt7629-uart
+              - mediatek,mt7986-uart
+              - mediatek,mt8127-uart
+              - mediatek,mt8135-uart
+              - mediatek,mt8173-uart
+              - mediatek,mt8183-uart
+              - mediatek,mt8186-uart
+              - mediatek,mt8188-uart
+              - mediatek,mt8192-uart
+              - mediatek,mt8195-uart
+              - mediatek,mt8516-uart
+          - const: mediatek,mt6577-uart
+
+  reg:
+    description: The base address of the UART register bank
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The clock the baudrate is derived from
+      - description: The bus clock for register accesses
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: baud
+      - const: bus
+
+  dmas:
+    items:
+      - description: phandle to TX DMA
+      - description: phandle to RX DMA
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description:
+      The UART interrupt and optionally the RX in-band wakeup interrupt.
+    minItems: 1
+    items:
+      - const: uart
+      - const: wakeup
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@11006000 {
+        compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+        reg = <0x11006000 0x400>;
+        interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "uart", "wakeup";
+        clocks = <&uart_clk>, <&bus_clk>;
+        clock-names = "baud", "bus";
+        pinctrl-0 = <&uart_pin>;
+        pinctrl-1 = <&uart_pin_sleep>;
+        pinctrl-names = "default", "sleep";
+    };
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
deleted file mode 100644
index b3a0bfef0d54..000000000000
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* MediaTek Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2701-uart" for MT2701 compatible UARTS
-  * "mediatek,mt2712-uart" for MT2712 compatible UARTS
-  * "mediatek,mt6580-uart" for MT6580 compatible UARTS
-  * "mediatek,mt6582-uart" for MT6582 compatible UARTS
-  * "mediatek,mt6589-uart" for MT6589 compatible UARTS
-  * "mediatek,mt6755-uart" for MT6755 compatible UARTS
-  * "mediatek,mt6765-uart" for MT6765 compatible UARTS
-  * "mediatek,mt6779-uart" for MT6779 compatible UARTS
-  * "mediatek,mt6795-uart" for MT6795 compatible UARTS
-  * "mediatek,mt6797-uart" for MT6797 compatible UARTS
-  * "mediatek,mt7622-uart" for MT7622 compatible UARTS
-  * "mediatek,mt7623-uart" for MT7623 compatible UARTS
-  * "mediatek,mt7629-uart" for MT7629 compatible UARTS
-  * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS
-  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
-  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
-  * "mediatek,mt8173-uart" for MT8173 compatible UARTS
-  * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
-  * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS
-  * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS
-  * "mediatek,mt8516-uart" for MT8516 compatible UARTS
-  * "mediatek,mt6577-uart" for MT6577 and all of the above
-
-- reg: The base address of the UART register bank.
-
-- interrupts:
-  index 0: an interrupt specifier for the UART controller itself
-  index 1: optional, an interrupt specifier with edge sensitivity on Rx pin to
-           support Rx in-band wake up. If one would like to use this feature,
-           one must create an addtional pinctrl to reconfigure Rx pin to normal
-           GPIO before suspend.
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names:
-  - "baud": The clock the baudrate is derived from
-  - "bus": The bus clock for register accesses (optional)
-
-For compatibility with older device trees an unnamed clock is used for the
-baud clock if the baudclk does not exist. Do not use this for new designs.
-
-Example:
-
-	uart0: serial@11006000 {
-		compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
-		reg = <0x11006000 0x400>;
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
-		clocks = <&uart_clk>, <&bus_clk>;
-		clock-names = "baud", "bus";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&uart_pin>;
-		pinctrl-1 = <&uart_pin_sleep>;
-	};
diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
index 2d0dbdf32d1d..a062bbca532c 100644
--- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
@@ -14,7 +14,10 @@ Required properties:
       is provided (possible only with the "marvell,armada-3700-uart"
       compatible string for backward compatibility), it will only work
       if the baudrate was initialized by the bootloader and no baudrate
-      change will then be possible.
+      change will then be possible. When provided it should be UART1-clk
+      for standard variant of UART and UART2-clk for extended variant
+      of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock
+      should not be used and are supported only for backward compatibility.
 - interrupts:
     - Must contain three elements for the standard variant of the IP
       (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx",
@@ -34,7 +37,7 @@ Example:
 	uart0: serial@12000 {
 		compatible = "marvell,armada-3700-uart";
 		reg = <0x12000 0x18>;
-		clocks = <&xtalclk>;
+		clocks = <&uartclk 0>;
 		interrupts =
 		<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 		<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
@@ -45,7 +48,7 @@ Example:
 	uart1: serial@12200 {
 		compatible = "marvell,armada-3700-uart-ext";
 		reg = <0x12200 0x30>;
-		clocks = <&xtalclk>;
+		clocks = <&uartclk 1>;
 		interrupts =
 		<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
 		<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
index 5ea00f8a283d..80af72859876 100644
--- a/Documentation/devicetree/bindings/serial/pl011.yaml
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -91,6 +91,15 @@ properties:
       3000ms.
     default: 3000
 
+  resets:
+    maxItems: 1
+
+  reg-io-width:
+    description:
+      The size (in bytes) of the IO accesses that should be performed
+      on the device.
+    enum: [1, 4]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
deleted file mode 100644
index 9d098cf73b53..000000000000
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-* MSM Serial UARTDM
-
-The MSM serial UARTDM hardware is designed for high-speed use cases where the
-transmit and/or receive channels can be offloaded to a dma-engine. From a
-software perspective it's mostly compatible with the MSM serial UART except
-that it supports reading and writing multiple characters at a time.
-
-Required properties:
-- compatible: Should contain at least "qcom,msm-uartdm".
-              A more specific property should be specified as follows depending
-	      on the version:
-		"qcom,msm-uartdm-v1.1"
-		"qcom,msm-uartdm-v1.2"
-		"qcom,msm-uartdm-v1.3"
-		"qcom,msm-uartdm-v1.4"
-- reg: Should contain UART register locations and lengths. The first
-       register shall specify the main control registers. An optional second
-       register location shall specify the GSBI control region.
-       "qcom,msm-uartdm-v1.3" is the only compatible value that might
-       need the GSBI control region.
-- interrupts: Should contain UART interrupt.
-- clocks: Should contain the core clock and the AHB clock.
-- clock-names: Should be "core" for the core clock and "iface" for the
-	       AHB clock.
-
-Optional properties:
-- dmas: Should contain dma specifiers for transmit and receive channels
-- dma-names: Should contain "tx" for transmit and "rx" for receive channels
-- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
-           used with TX DMA channel. Required when using DMA for transmission
-           with UARTDM v1.3 and below.
-- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
-           used with RX DMA channel. Required when using DMA for reception
-           with UARTDM v1.3 and below.
-
-Note: Aliases may be defined to ensure the correct ordering of the UARTs.
-The alias serialN will result in the UART being assigned port N.  If any
-serialN alias exists, then an alias must exist for each enabled UART.  The
-serialN aliases should be in a .dts file instead of in a .dtsi file.
-
-Examples:
-
-- A uartdm v1.4 device with dma capabilities.
-
-	serial@f991e000 {
-		compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-		reg = <0xf991e000 0x1000>;
-		interrupts = <0 108 0x0>;
-		clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
-		clock-names = "core", "iface";
-		dmas = <&dma0 0>, <&dma0 1>;
-		dma-names = "tx", "rx";
-	};
-
-- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
-	serial@19c40000 {
-		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-		reg = <0x19c40000 0x1000>,
-		<0x19c00000 0x1000>;
-		interrupts = <0 195 0x0>;
-		clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
-		clock-names = "core", "iface";
-	};
-
-- serialN alias.
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartc;
-		serial2 = &uartb;
-	};
-
-	uarta: serial@12490000 {
-	};
-
-	uartb: serial@16340000 {
-	};
-
-	uartc: serial@1a240000 {
-	};
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
new file mode 100644
index 000000000000..484b9a51f6a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM Serial UARTDM
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The MSM serial UARTDM hardware is designed for high-speed use cases where the
+  transmit and/or receive channels can be offloaded to a dma-engine. From a
+  software perspective it's mostly compatible with the MSM serial UART except
+  that it supports reading and writing multiple characters at a time.
+
+  Note:: Aliases may be defined to ensure the correct ordering of the UARTs.
+  The alias serialN will result in the UART being assigned port N.  If any
+  serialN alias exists, then an alias must exist for each enabled UART.  The
+  serialN aliases should be in a .dts file instead of in a .dtsi file.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm-uartdm-v1.1
+          - qcom,msm-uartdm-v1.2
+          - qcom,msm-uartdm-v1.3
+          - qcom,msm-uartdm-v1.4
+      - const: qcom,msm-uartdm
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  qcom,rx-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Identificator for Client Rate Control Interface to be used with RX DMA
+      channel. Required when using DMA for reception with UARTDM v1.3 and
+      below.
+
+  qcom,tx-crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Identificator for Client Rate Control Interface to be used with TX DMA
+      channel. Required when using DMA for transmission with UARTDM v1.3 and
+      below.
+
+  reg:
+    minItems: 1
+    items:
+      - description: Main control registers
+      - description: An optional second register location shall specify the GSBI control region.
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,msm-uartdm-v1.3
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    serial@f991e000 {
+        compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+        reg = <0xf991e000 0x1000>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+        clock-names = "core", "iface";
+        dmas = <&dma0 0>, <&dma0 1>;
+        dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
new file mode 100644
index 000000000000..05a6999808d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-uart
+      - qcom,geni-debug-uart
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: qup-core
+      - const: qup-config
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: UART core irq
+      - description: Wakeup irq (RX GPIO)
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+    serial@a88000 {
+        compatible = "qcom,geni-uart";
+        reg = <0xa88000 0x7000>;
+        interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-0 = <&qup_uart0_default>;
+        pinctrl-names = "default";
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
deleted file mode 100644
index a08df97a69e6..000000000000
--- a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-RDA Micro UART
-
-Required properties:
-- compatible :  "rda,8810pl-uart" for RDA8810PL SoCs.
-- reg        :  Offset and length of the register set for the device.
-- interrupts :  Should contain UART interrupt.
-- clocks     :  Phandle to the input clock.
-
-
-Example:
-
-		uart2: serial@20a90000 {
-			compatible = "rda,8810pl-uart";
-			reg = <0x20a90000 0x1000>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_clk>;
-		};
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
new file mode 100644
index 000000000000..5f4ed8221270
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rda,8810pl-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro UART Interface
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    uart3: serial@20a90000 {
+      compatible = "rda,8810pl-uart";
+      reg = <0x20a90000 0x1000>;
+      interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&uart_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
index e98ec48fee46..b25aca733b72 100644
--- a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -9,12 +9,16 @@ title: Renesas EMMA Mobile UART Interface
 maintainers:
   - Magnus Damm <magnus.damm@gmail.com>
 
-allOf:
-  - $ref: serial.yaml#
-
 properties:
   compatible:
-    const: renesas,em-uart
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a09g011-uart    # RZ/V2M
+          - const: renesas,em-uart        # generic EMMA Mobile compatible UART
+
+      - items:
+          - const: renesas,em-uart        # generic EMMA Mobile compatible UART
 
   reg:
     maxItems: 1
@@ -23,10 +27,31 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: UART functional clock
+      - description: Internal clock to access the registers
 
   clock-names:
-    const: sclk
+    minItems: 1
+    items:
+      - const: sclk
+      - const: pclk
+
+allOf:
+  - $ref: serial.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g011-uart
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
index ee9804cd49bb..1957b9d782e8 100644
--- a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -51,10 +51,17 @@ properties:
               - renesas,hscif-r8a77980     # R-Car V3H
               - renesas,hscif-r8a77990     # R-Car E3
               - renesas,hscif-r8a77995     # R-Car D3
-              - renesas,hscif-r8a779a0     # R-Car V3U
           - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2
           - const: renesas,hscif           # generic HSCIF compatible UART
 
+      - items:
+          - enum:
+              - renesas,hscif-r8a779a0     # R-Car V3U
+              - renesas,hscif-r8a779f0     # R-Car S4-8
+              - renesas,hscif-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-hscif # R-Car Gen4
+          - const: renesas,hscif           # generic HSCIF compatible UART
+
   reg:
     maxItems: 1
 
@@ -113,6 +120,7 @@ if:
         enum:
           - renesas,rcar-gen2-hscif
           - renesas,rcar-gen3-hscif
+          - renesas,rcar-gen4-hscif
 then:
   required:
     - resets
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
index 22ed2f0b1dc3..bf7708a7a2c0 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -14,7 +14,16 @@ allOf:
 
 properties:
   compatible:
-    const: renesas,sci
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-sci     # RZ/G2UL
+              - renesas,r9a07g044-sci     # RZ/G2{L,LC}
+              - renesas,r9a07g054-sci     # RZ/V2L
+          - const: renesas,sci            # generic SCI compatible UART
+
+      - items:
+          - const: renesas,sci            # generic SCI compatible UART
 
   reg:
     maxItems: 1
@@ -54,18 +63,47 @@ required:
   - clocks
   - clock-names
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g043-sci
+          - renesas,r9a07g044-sci
+          - renesas,r9a07g054-sci
+then:
+  properties:
+    resets:
+      maxItems: 1
+
+    power-domains:
+      maxItems: 1
+
+  required:
+    - resets
+    - power-domains
+
 unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     aliases {
             serial0 = &sci0;
     };
 
-    sci0: serial@ffff78 {
-            compatible = "renesas,sci";
-            reg = <0xffff78 8>;
-            interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
-            clocks = <&fclk>;
+    sci0: serial@1004d000 {
+            compatible = "renesas,r9a07g044-sci", "renesas,sci";
+            reg = <0x1004d000 0x400>;
+            interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "eri", "rxi", "txi", "tei";
+            clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
             clock-names = "fck";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SCI0_RST>;
     };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
index 6b8731f7f2fb..f930e7f1349f 100644
--- a/Documentation/devicetree/bindings/serial/renesas,scif.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -60,14 +60,26 @@ properties:
               - renesas,scif-r8a77980     # R-Car V3H
               - renesas,scif-r8a77990     # R-Car E3
               - renesas,scif-r8a77995     # R-Car D3
-              - renesas,scif-r8a779a0     # R-Car V3U
           - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2
           - const: renesas,scif           # generic SCIF compatible UART
 
       - items:
           - enum:
+              - renesas,scif-r8a779a0     # R-Car V3U
+              - renesas,scif-r8a779f0     # R-Car S4-8
+          - const: renesas,rcar-gen4-scif # R-Car Gen4
+          - const: renesas,scif           # generic SCIF compatible UART
+
+      - items:
+          - enum:
               - renesas,scif-r9a07g044      # RZ/G2{L,LC}
 
+      - items:
+          - enum:
+              - renesas,scif-r9a07g043      # RZ/G2UL and RZ/Five
+              - renesas,scif-r9a07g054      # RZ/V2L
+          - const: renesas,scif-r9a07g044   # RZ/G2{L,LC} fallback
+
   reg:
     maxItems: 1
 
@@ -153,6 +165,8 @@ if:
         enum:
           - renesas,rcar-gen2-scif
           - renesas,rcar-gen3-scif
+          - renesas,rcar-gen4-scif
+          - renesas,scif-r9a07g044
 then:
   required:
     - resets
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
index 0c9fa694f85c..90a1bab40f05 100644
--- a/Documentation/devicetree/bindings/serial/rs485.yaml
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -22,17 +22,22 @@ properties:
         - description: Delay between rts signal and beginning of data sent in
             milliseconds. It corresponds to the delay before sending data.
           default: 0
-          maximum: 1000
+          maximum: 100
         - description: Delay between end of data sent and rts signal in milliseconds.
             It corresponds to the delay after sending data and actual release
             of the line.
           default: 0
-          maximum: 1000
+          maximum: 100
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
     $ref: /schemas/types.yaml#/definitions/flag
 
+  rs485-rx-active-high:
+    description: Polarity of receiver enable signal (when separate from RTS).
+      True indicates active high (default is low).
+    $ref: /schemas/types.yaml#/definitions/flag
+
   linux,rs485-enabled-at-boot-time:
     description: enables the rs485 feature at boot time. It can be disabled
       later with proper ioctl.
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 2940afb874b3..8bd88d5cbb11 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -17,15 +17,20 @@ description: |+
 
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
+          - const: samsung,exynosautov9-uart
+          - const: samsung,exynos850-uart
       - enum:
           - apple,s5l-uart
+          - axis,artpec8-uart
           - samsung,s3c2410-uart
           - samsung,s3c2412-uart
           - samsung,s3c2440-uart
           - samsung,s3c6400-uart
           - samsung,s5pv210-uart
           - samsung,exynos4210-uart
+          - samsung,exynos5433-uart
           - samsung,exynos850-uart
 
   reg:
@@ -35,7 +40,6 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 1, 4 ]
 
   clocks:
@@ -67,6 +71,9 @@ properties:
     minItems: 1
     maxItems: 2
 
+  power-domains:
+    maxItems: 1
+
   samsung,uart-fifosize:
     description: The fifo size supported by the UART channel.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -98,7 +105,6 @@ allOf:
           maxItems: 3
         clock-names:
           minItems: 2
-          maxItems: 3
           items:
             - const: uart
             - pattern: '^clk_uart_baud[0-1]$'
@@ -110,15 +116,14 @@ allOf:
           contains:
             enum:
               - apple,s5l-uart
+              - axis,artpec8-uart
               - samsung,exynos4210-uart
+              - samsung,exynos5433-uart
     then:
       properties:
         clocks:
-          minItems: 2
           maxItems: 2
         clock-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: uart
             - const: clk_uart_baud0
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
index 09aae43f65a7..b0a8871e3641 100644
--- a/Documentation/devicetree/bindings/serial/sifive-serial.yaml
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -59,7 +59,7 @@ examples:
         interrupt-parent = <&plic0>;
         interrupts = <80>;
         reg = <0x10010000 0x1000>;
-        clocks = <&prci PRCI_CLK_TLCLK>;
+        clocks = <&prci FU540_PRCI_CLK_TLCLK>;
       };
 
 ...
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 12137fe80acf..b9c2287c5d1e 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -26,6 +26,7 @@ properties:
               - rockchip,rk1808-uart
               - rockchip,rk3036-uart
               - rockchip,rk3066-uart
+              - rockchip,rk3128-uart
               - rockchip,rk3188-uart
               - rockchip,rk3288-uart
               - rockchip,rk3308-uart
@@ -33,7 +34,9 @@ properties:
               - rockchip,rk3368-uart
               - rockchip,rk3399-uart
               - rockchip,rk3568-uart
+              - rockchip,rk3588-uart
               - rockchip,rv1108-uart
+              - rockchip,rv1126-uart
           - const: snps,dw-apb-uart
       - items:
           - enum:
diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
index d490c7c4b967..3d01cc355778 100644
--- a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
@@ -20,7 +20,10 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 1
+    maxItems: 1
+
+  resets:
+    maxItems: 1
 
   auto-flow-control:
     description: enable automatic flow control support.
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
index a444bebd2c1a..da0e2745b5fc 100644
--- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -35,7 +35,7 @@ properties:
 
   clock-names:
     description: |
-      "enable" for UART module enable clock, "uart" for UART clock, "source" 
+      "enable" for UART module enable clock, "uart" for UART clock, "source"
       for UART source (parent) clock.
     items:
       - const: enable
diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
new file mode 100644
index 000000000000..ea1e637661c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC SP7021 UART Controller
+
+maintainers:
+  - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+  - $ref: serial.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    aliases {
+        serial0 = &uart0;
+    };
+
+    uart0: serial@9c000900 {
+        compatible = "sunplus,sp7021-uart";
+        reg = <0x9c000900 0x80>;
+        interrupt-parent = <&intc>;
+        interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x28>;
+        resets = <&rstc 0x18>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
index 2ecab8ed702a..7fa70fd1f291 100644
--- a/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
+++ b/Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/serio/allwinner,sun4i-a10-ps2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 PS2 Host Controller Device Tree Bindings
+title: Allwinner A10 PS2 Host Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/serio/arm,pl050.yaml b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
new file mode 100644
index 000000000000..d80f58d15497
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/arm,pl050.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/arm,pl050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL050 PS/2 Keyboard/Mouse Interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell PS2 Keyboard/Mouse Interface (KMI) is an AMBA compliant
+  peripheral that can be used to implement a keyboard or mouse interface that
+  is IBM PS2 or AT compatible.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl050
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl050
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: KMI reference clock, used to generate the bus timing
+      - description: APB register access clock
+
+  clock-names:
+    items:
+      - const: KMIREFCLK
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    serio@70000 {
+        compatible = "arm,pl050", "arm,primecell";
+        reg = <0x070000 0x1000>;
+        interrupts = <8>;
+        clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+        clock-names = "KMIREFCLK", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt
deleted file mode 100644
index 7b7bc9cdf986..000000000000
--- a/Documentation/devicetree/bindings/serio/ps2-gpio.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Device-Tree binding for ps/2 gpio device
-
-Required properties:
-	- compatible = "ps2-gpio"
-	- data-gpios: the data pin
-	- clk-gpios: the clock pin
-	- interrupts: Should trigger on the falling edge of the clock line.
-
-Optional properties:
-	- write-enable: Indicates whether write function is provided
-	to serio device. Possibly providing the write fn will not work, because
-	of the tough timing requirements.
-
-Example nodes:
-
-ps2@0 {
-	compatible = "ps2-gpio";
-	interrupt-parent = <&gpio>;
-	interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-	data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
-	write-enable;
-};
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
new file mode 100644
index 000000000000..a63d9172346f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO based PS/2
+
+maintainers:
+  - Danilo Krummrich <danilokrummrich@dk-develop.de>
+
+properties:
+  compatible:
+    const: ps2-gpio
+
+  data-gpios:
+    description:
+      the gpio used for the data signal - this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+      definition
+    maxItems: 1
+
+  clk-gpios:
+    description:
+      the gpio used for the clock signal - this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+      definition
+    maxItems: 1
+
+  interrupts:
+    description:
+      The given interrupt should trigger on the falling edge of the clock line.
+    maxItems: 1
+
+  write-enable:
+    type: boolean
+    description:
+      Indicates whether write function is provided to serio device. Possibly
+      providing the write function will not work, because of the tough timing
+      requirements.
+
+required:
+  - compatible
+  - data-gpios
+  - clk-gpios
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ps2 {
+        compatible = "ps2-gpio";
+        interrupt-parent = <&gpio>;
+        interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        data-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        clk-gpios = <&gpio 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        write-enable;
+    };
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index 02b2d5ba01d6..c3c599096353 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Canvas Video Lookup Table
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Maxime Jourdan <mjourdan@baylibre.com>
 
 description: |
@@ -48,4 +48,3 @@ examples:
         compatible = "amlogic,canvas";
         reg = <0x48 0x14>;
     };
-
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
deleted file mode 100644
index 72ff033565e5..000000000000
--- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-BCM2835 PM (Power domains, watchdog)
-
-The PM block controls power domains and some reset lines, and includes
-a watchdog timer.  This binding supersedes the brcm,bcm2835-pm-wdt
-binding which covered some of PM's register range and functionality.
-
-Required properties:
-
-- compatible:		Should be "brcm,bcm2835-pm"
-- reg:			Specifies base physical address and size of the two
-			  register ranges ("PM" and "ASYNC_BRIDGE" in that
-			  order)
-- clocks:		a) v3d: The V3D clock from CPRMAN
-			b) peri_image: The PERI_IMAGE clock from CPRMAN
-			c) h264: The H264 clock from CPRMAN
-			d) isp: The ISP clock from CPRMAN
-- #reset-cells: 	Should be 1.  This property follows the reset controller
-			  bindings[1].
-- #power-domain-cells:	Should be 1.  This property follows the power domain
-			  bindings[2].
-
-Optional properties:
-
-- timeout-sec:		Contains the watchdog timeout in seconds
-- system-power-controller: Whether the watchdog is controlling the
-    system power.  This node follows the power controller bindings[3].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/power/power-controller.txt
-
-Example:
-
-pm {
-	compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-	reg = <0x7e100000 0x114>,
-	      <0x7e00a000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_V3D>,
-		 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-		 <&clocks BCM2835_CLOCK_H264>,
-		 <&clocks BCM2835_CLOCK_ISP>;
-	clock-names = "v3d", "peri_image", "h264", "isp";
-	system-power-controller;
-};
diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
new file mode 100644
index 000000000000..e28ef198a801
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 PM (Power domains, watchdog)
+
+description: |
+  The PM block controls power domains and some reset lines, and includes a
+  watchdog timer.
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+  - $ref: /schemas/watchdog/watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2835-pm
+          - brcm,bcm2711-pm
+      - const: brcm,bcm2835-pm-wdt
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: pm
+      - const: asb
+      - const: rpivid_asb
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: v3d
+      - const: peri_image
+      - const: h264
+      - const: isp
+
+  system-power-controller:
+    type: boolean
+
+  timeout-sec: true
+
+required:
+  - compatible
+  - reg
+  - "#power-domain-cells"
+  - "#reset-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+
+    watchdog@7e100000 {
+        compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+        reg = <0x7e100000 0x114>,
+              <0x7e00a000 0x24>;
+        reg-names = "pm", "asb";
+        clocks = <&clocks BCM2835_CLOCK_V3D>,
+               <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+               <&clocks BCM2835_CLOCK_H264>,
+               <&clocks BCM2835_CLOCK_ISP>;
+        clock-names = "v3d", "peri_image", "h264", "isp";
+        system-power-controller;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
new file mode 100644
index 000000000000..397f75909b20
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Device Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  DCFG is the device configuration unit, that provides general purpose
+  configuration and status for the device. Such as setting the secondary
+  core start address and release the secondary core from holdoff and
+  startup.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,ls1012a-dcfg
+              - fsl,ls1021a-dcfg
+              - fsl,ls1043a-dcfg
+              - fsl,ls1046a-dcfg
+              - fsl,ls1088a-dcfg
+              - fsl,ls2080a-dcfg
+              - fsl,lx2160a-dcfg
+          - const: syscon
+
+      - items:
+          - enum:
+              - fsl,ls1028a-dcfg
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^clock-controller@[0-9a-z]+$":
+    $ref: /schemas/clock/fsl,flexspi-clock.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1ee0000 {
+        compatible = "fsl,ls1021a-dcfg", "syscon";
+        reg = <0x1ee0000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
new file mode 100644
index 000000000000..8d088b5fe823
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Supplemental Configuration Unit
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  SCFG is the supplemental configuration unit, that provides SoC specific
+  configuration and status registers for the chip. Such as getting PEX port
+  status.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1012a-scfg
+          - fsl,ls1021a-scfg
+          - fsl,ls1028a-scfg
+          - fsl,ls1043a-scfg
+          - fsl,ls1046a-scfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+  big-endian: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@[a-z0-9]+$":
+    $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1570000 {
+        compatible = "fsl,ls1021a-scfg", "syscon";
+        reg = <0x1570000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
index 26487daa64d9..d71bb20d4907 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml
@@ -27,25 +27,22 @@ properties:
     const: 1
 
   power-domains:
-    minItems: 4
     maxItems: 4
 
   power-domain-names:
-    items:
-      - const: bus
-      - const: g1
-      - const: g2
-      - const: h1
+    maxItems: 4
 
   clocks:
-    minItems: 3
     maxItems: 3
 
   clock-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: h1
+    maxItems: 3
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
 
 required:
   - compatible
@@ -55,6 +52,97 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mm-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: H1 encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: h1
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: H1 encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: H1 encoder power domain
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: h1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-vpu-blk-ctrl
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: bus power domain
+            - description: G1 decoder power domain
+            - description: G2 decoder power domain
+            - description: VC8000E encoder power domain
+
+        power-domain-names:
+          items:
+            - const: bus
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        clocks:
+          items:
+            - description: G1 decoder clk
+            - description: G2 decoder clk
+            - description: VC8000E encoder clk
+
+        clock-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
+        interconnects:
+          items:
+            - description: G1 decoder interconnect
+            - description: G2 decoder interconnect
+            - description: VC8000E encoder interconnect
+
+        interconnect-names:
+          items:
+            - const: g1
+            - const: g2
+            - const: vc8000e
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
new file mode 100644
index 000000000000..1be4ce2a45e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HDMI blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the display pipeline
+  peripherals located in the HDMI domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hdmi-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 8
+    maxItems: 8
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: irqsteer
+      - const: lcdif
+      - const: pai
+      - const: pvi
+      - const: trng
+      - const: hdmi-tx
+      - const: hdmi-tx-phy
+
+  clocks:
+    minItems: 4
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: ref_266m
+      - const: ref_24m
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: hrv
+      - const: lcdif-hdmi
+      - const: hdcp
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    blk-ctrl@32fc0000 {
+        compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+        reg = <0x32fc0000 0x23c>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_ROOT>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_HDMI_24M>;
+        clock-names = "apb", "axi", "ref_266m", "ref_24m";
+        power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+                        <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+        power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
+                             "hdmi-tx", "hdmi-tx-phy";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
new file mode 100644
index 000000000000..c29181a9745b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HSIO blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the high-speed IO
+  (USB an PCIe) peripherals located in the HSIO domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-hsio-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 6
+    maxItems: 6
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: usb
+      - const: usb-phy1
+      - const: usb-phy2
+      - const: pcie
+      - const: pcie-phy
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: usb
+      - const: pcie
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: noc-pcie
+      - const: usb1
+      - const: usb2
+      - const: pcie
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hsio_blk_ctrl: blk-ctrl@32f10000 {
+        compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+        reg = <0x32f10000 0x24>;
+        clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+                 <&clk IMX8MP_CLK_PCIE_ROOT>;
+        clock-names = "usb", "pcie";
+        power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+                        <&pgc_usb1_phy>, <&pgc_usb2_phy>,
+                        <&pgc_hsiomix>, <&pgc_pcie_phy>;
+        power-domain-names = "bus", "usb", "usb-phy1",
+                             "usb-phy2", "pcie", "pcie-phy";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
new file mode 100644
index 000000000000..dadb6108e321
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP Media Block Control
+
+maintainers:
+  - Paul Elder <paul.elder@ideasonboard.com>
+
+description:
+  The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral
+  providing access to the NoC and ensuring proper power sequencing of the
+  peripherals within the MEDIAMIX domain.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mp-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 10
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: mipi-dsi1
+      - const: mipi-csi1
+      - const: lcdif1
+      - const: isi
+      - const: mipi-csi2
+      - const: lcdif2
+      - const: isp
+      - const: dwe
+      - const: mipi-dsi2
+
+  clocks:
+    items:
+      - description: The APB clock
+      - description: The AXI clock
+      - description: The pixel clock for the first CSI2 receiver (aclk)
+      - description: The pixel clock for the second CSI2 receiver (aclk)
+      - description: The pixel clock for the first LCDIF (pix_clk)
+      - description: The pixel clock for the second LCDIF (pix_clk)
+      - description: The core clock for the ISP (clk)
+      - description: The MIPI-PHY reference clock used by DSI
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: cam1
+      - const: cam2
+      - const: disp1
+      - const: disp2
+      - const: isp
+      - const: phy
+
+  interconnects:
+    maxItems: 8
+
+  interconnect-names:
+    items:
+      - const: lcdif-rd
+      - const: lcdif-wr
+      - const: isi0
+      - const: isi1
+      - const: isi2
+      - const: isp0
+      - const: isp1
+      - const: dwe
+
+required:
+  - compatible
+  - reg
+  - '#power-domain-cells'
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    media_blk_ctl: blk-ctl@32ec0000 {
+        compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
+        reg = <0x32ec0000 0x138>;
+        power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>,
+                        <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>,
+                        <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>,
+                        <&mipi_phy2_pd>;
+        power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi",
+                             "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2";
+        clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+        clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2",
+                      "isp", "phy";
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml
new file mode 100644
index 000000000000..7263ebedf09f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ VPU blk-ctrl
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to
+  the NoC and ensuring proper power sequencing of the VPU peripherals
+  located in the VPU domain of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8mq-vpu-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    minItems: 3
+    maxItems: 3
+
+  power-domain-names:
+    items:
+      - const: bus
+      - const: g1
+      - const: g2
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: g1
+      - const: g2
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - power-domain-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/power/imx8mq-power.h>
+
+    vpu_blk_ctrl: blk-ctrl@38320000 {
+      compatible = "fsl,imx8mq-vpu-blk-ctrl";
+      reg = <0x38320000 0x100>;
+      power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+      power-domain-names = "bus", "g1", "g2";
+      clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+               <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+      clock-names = "g1", "g2";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
new file mode 100644
index 000000000000..792ebecec22d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Media blk-ctrl
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description:
+  The i.MX93 MEDIAMIX domain contains control and status registers known
+  as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include
+  clocking, reset, and miscellaneous top-level controls for peripherals
+  within the MEDIAMIX domain
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-media-blk-ctrl
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 10
+
+  clock-names:
+    items:
+      - const: apb
+      - const: axi
+      - const: nic
+      - const: disp
+      - const: cam
+      - const: pxp
+      - const: lcdif
+      - const: isi
+      - const: csi
+      - const: dsi
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    media_blk_ctrl: system-controller@4ac10000 {
+      compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+      reg = <0x4ac10000 0x10000>;
+      power-domains = <&mediamix>;
+      clocks = <&clk IMX93_CLK_MEDIA_APB>,
+               <&clk IMX93_CLK_MEDIA_AXI>,
+               <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+               <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+               <&clk IMX93_CLK_CAM_PIX>,
+               <&clk IMX93_CLK_PXP_GATE>,
+               <&clk IMX93_CLK_LCDIF_GATE>,
+               <&clk IMX93_CLK_ISI_GATE>,
+               <&clk IMX93_CLK_MIPI_CSI_GATE>,
+               <&clk IMX93_CLK_MIPI_DSI_GATE>;
+               clock-names = "apb", "axi", "nic", "disp", "cam",
+                             "pxp", "lcdif", "isi", "csi", "dsi";
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml
new file mode 100644
index 000000000000..c1cc69b51981
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 System Reset Controller
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  The System Reset Controller (SRC) is responsible for the generation of
+  all the system reset signals and boot argument latching.
+
+  Its main functions are as follows,
+  - Deals with all global system reset sources from other modules,
+    and generates global system reset.
+  - Responsible for power gating of MIXs (Slices) and their memory
+    low power control.
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx93-src
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "power-domain@[0-9a-f]+$":
+
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: fsl,imx93-src-slice
+
+      '#power-domain-cells':
+        const: 0
+
+      reg:
+        items:
+          - description: mix slice register region
+          - description: mem slice register region
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled
+          during domain power-up sequencing to ensure reset
+          propagation into devices located inside this power domain.
+        minItems: 1
+        maxItems: 5
+
+    required:
+      - compatible
+      - '#power-domain-cells'
+      - reg
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    system-controller@44460000 {
+        compatible = "fsl,imx93-src", "syscon";
+        reg = <0x44460000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        mediamix: power-domain@0 {
+            compatible = "fsl,imx93-src-slice";
+            reg = <0x44462400 0x400>, <0x44465800 0x400>;
+            #power-domain-cells = <0>;
+            clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+                     <&clk IMX93_CLK_MEDIA_APB>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
new file mode 100644
index 000000000000..8634865015cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022, Intel Corporation
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel HPS Copy Engine
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+description: |
+  The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy
+  a bootable image from host memory to HPS DDR.  Additionally, there is a
+  register the HPS can use to indicate the state of booting the copied image as
+  well as a keep-a-live indication to the host.
+
+properties:
+  compatible:
+    const: intel,hps-copy-engine
+
+  '#dma-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus@80000000 {
+        compatible = "simple-bus";
+        reg = <0x80000000 0x60000000>,
+              <0xf9000000 0x00100000>;
+        reg-names = "axi_h2f", "axi_h2f_lw";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+        dma-controller@0 {
+            compatible = "intel,hps-copy-engine";
+            reg = <0x00000000 0x00000000 0x00001000>;
+            #dma-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
index 31e4d3c339bf..d0a4bc3b03e9 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - mediatek,mt6779-devapc
+      - mediatek,mt8186-devapc
 
   reg:
     description: The base address of devapc register bank
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..4380b98b0dfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek color correction
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek color correction with 3X3 matrix.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-ccorr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_ccorr: mdp3-ccorr@1401c000 {
+      compatible = "mediatek,mt8183-mdp3-ccorr";
+      reg = <0x1401c000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+                            <CMDQ_EVENT_MDP_CCORR_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_CCORR>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
new file mode 100644
index 000000000000..9241e5fc7cff
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mutex
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek mutex, namely MUTEX, is used to send the triggers signals called
+  Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
+  data path or MDP data path.
+  In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
+  the shadow register.
+  MUTEX device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-disp-mutex
+      - mediatek,mt2712-disp-mutex
+      - mediatek,mt6795-disp-mutex
+      - mediatek,mt8167-disp-mutex
+      - mediatek,mt8173-disp-mutex
+      - mediatek,mt8183-disp-mutex
+      - mediatek,mt8186-disp-mutex
+      - mediatek,mt8186-mdp3-mutex
+      - mediatek,mt8192-disp-mutex
+      - mediatek,mt8195-disp-mutex
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: MUTEX Clock
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mutex: mutex@14020000 {
+            compatible = "mediatek,mt8173-disp-mutex";
+            reg = <0 0x14020000 0 0x1000>;
+            interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_MUTEX_32K>;
+            mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                  <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..69afb329e5f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wdma: mdp3-wdma@14006000 {
+      compatible = "mediatek,mt8183-mdp3-wdma";
+      reg = <0x14006000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_WDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
new file mode 100644
index 000000000000..d911fa2d40ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Smart Voltage Scaling (SVS) Device Tree Bindings
+
+maintainers:
+  - Roger Lu <roger.lu@mediatek.com>
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Kevin Hilman <khilman@kernel.org>
+
+description: |+
+  The SVS engine is a piece of hardware which has several
+  controllers(banks) for calculating suitable voltage to
+  different power domains(CPU/GPU/CCI) according to
+  chip process corner, temperatures and other factors. Then DVFS
+  driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-svs
+      - mediatek,mt8192-svs
+
+  reg:
+    maxItems: 1
+    description: Address range of the MTK SVS controller.
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Main clock for MTK SVS controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    minItems: 1
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+    items:
+      - description: SVS efuse for SVS controller
+      - description: Thermal efuse for SVS controller
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: t-calibration-data
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: svs_rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        svs@1100b000 {
+            compatible = "mediatek,mt8183-svs";
+            reg = <0 0x1100b000 0 0x1000>;
+            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_THERM>;
+            clock-names = "main";
+            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index d74a7a5ae9f2..d24e2bc444be 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -27,23 +27,25 @@ Required properties in pwrap device node.
 	"mediatek,mt8135-pwrap" for MT8135 SoCs
 	"mediatek,mt8173-pwrap" for MT8173 SoCs
 	"mediatek,mt8183-pwrap" for MT8183 SoCs
+	"mediatek,mt8186-pwrap" for MT8186 SoCs
+	"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
 	"mediatek,mt8195-pwrap" for MT8195 SoCs
 	"mediatek,mt8516-pwrap" for MT8516 SoCs
 - interrupts: IRQ for pwrap in SOC
-- reg-names: Must include the following entries:
+- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
   "pwrap": Main registers base
   "pwrap-bridge": bridge base (IP Pairing)
 - reg: Must contain an entry for each entry in reg-names.
-- reset-names: Must include the following entries:
-  "pwrap"
-  "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
 - clock-names: Must include the following entries:
   "spi": SPI bus clock
   "wrap": Main module clock
 - clocks: Must contain an entry for each entry in clock-names.
 
 Optional properities:
+- reset-names: Some SoCs include the following entries:
+  "pwrap"
+  "pwrap-bridge" (IP Pairing)
+- resets: Must contain an entry for each entry in reset-names.
 - pmic: Using either MediaTek PMIC MFD as the child device of pwrap
   See the following for child node definitions:
   Documentation/devicetree/bindings/mfd/mt6397.txt
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
index 597d67fba92f..33748a061898 100644
--- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Atmel Timer Counter Block
 
@@ -75,7 +75,7 @@ patternProperties:
 
   "^pwm@[0-2]$":
     description: The timer block channels that are used as PWMs.
-    $ref: ../../pwm/pwm.yaml#
+    $ref: /schemas/pwm/pwm.yaml#
     type: object
     properties:
       compatible:
diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
new file mode 100644
index 000000000000..04ffee3a7c59
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  PolarFire SoC devices include a microcontroller acting as the system controller,
+  which provides "services" to the main processor and to the FPGA fabric. These
+  services include hardware rng, reprogramming of the FPGA and verfification of the
+  eNVM contents etc. More information on these services can be found online, at
+  https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html
+
+  Communication with the system controller is done via a mailbox, of which the client
+  portion is documented here.
+
+properties:
+  mboxes:
+    maxItems: 1
+
+  compatible:
+    const: microchip,mpfs-sys-controller
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    syscontroller {
+      compatible = "microchip,mpfs-sys-controller";
+      mboxes = <&mbox 0>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml
deleted file mode 100644
index 2cd3bc6bd8d6..000000000000
--- a/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml
+++ /dev/null
@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller
-
-maintainers:
-  - Conor Dooley <conor.dooley@microchip.com>
-
-description: |
-  The PolarFire SoC system controller is communicated with via a mailbox.
-  This document describes the bindings for the client portion of that mailbox.
-
-
-properties:
-  mboxes:
-    maxItems: 1
-
-  compatible:
-    const: microchip,polarfire-soc-sys-controller
-
-required:
-  - compatible
-  - mboxes
-
-additionalProperties: false
-
-examples:
-  - |
-    syscontroller: syscontroller {
-      compatible = "microchip,polarfire-soc-sys-controller";
-      mboxes = <&mbox 0>;
-    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index e2e173dfada7..a4eeb7e158e5 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -13,7 +13,7 @@ description:
   This binding describes the hardware component responsible for side channel
   requests to the always-on subsystem (AOSS), used for certain power management
   requests that is not handled by the standard RPMh interface. Each client in the
-  SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+  SoC has its own block of message RAM and IRQ for communication with the AOSS.
   The protocol used to communicate in the message RAM is known as Qualcomm
   Messaging Protocol (QMP)
 
@@ -33,6 +33,7 @@ properties:
           - qcom,sm8150-aoss-qmp
           - qcom,sm8250-aoss-qmp
           - qcom,sm8350-aoss-qmp
+          - qcom,sm8450-aoss-qmp
       - const: qcom,aoss-qmp
 
   reg:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
index 028c5d105adb..f47491aab3b1 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
@@ -20,6 +20,9 @@ properties:
       - qcom,apr-v2
       - qcom,gpr
 
+  power-domains:
+    maxItems: 1
+
   qcom,apr-domain:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 3, 4, 5, 6, 7]
@@ -52,6 +55,26 @@ properties:
         2 = Audio DSP Domain
         3 = Application Processor Domain
 
+  qcom,glink-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    items:
+      - const: apr_audio_svc
+
+  qcom,intents:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      List of (size, amount) pairs describing what intents should be
+      preallocated for this virtual channel. This can be used to tweak the
+      default intents available for the channel to meet expectations of the
+      remote.
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Channel name used for the communication
+    items:
+      - const: apr_audio_svc
+
   '#address-cells':
     const: 1
 
@@ -97,6 +120,26 @@ patternProperties:
             3 = AMDB Service.
             4 = Voice processing manager.
 
+      clock-controller:
+        $ref: /schemas/sound/qcom,q6dsp-lpass-clocks.yaml#
+        description: Qualcomm DSP LPASS clock controller
+        unevaluatedProperties: false
+
+      dais:
+        type: object
+        oneOf:
+          - $ref: /schemas/sound/qcom,q6apm-dai.yaml#
+          - $ref: /schemas/sound/qcom,q6dsp-lpass-ports.yaml#
+          - $ref: /schemas/sound/qcom,q6asm-dais.yaml#
+        unevaluatedProperties: false
+        description: Qualcomm DSP audio ports
+
+      routing:
+        type: object
+        $ref: /schemas/sound/qcom,q6adm-routing.yaml#
+        unevaluatedProperties: false
+        description: Qualcomm DSP LPASS audio routing
+
       qcom,protection-domain:
         $ref: /schemas/types.yaml#/definitions/string-array
         description: protection domain service name and path for apr service
@@ -107,17 +150,44 @@ patternProperties:
           "tms/servreg", "msm/modem/wlan_pd".
           "tms/servreg", "msm/slpi/sensor_pd".
 
-      '#address-cells':
-        const: 1
+    allOf:
+      - if:
+          properties:
+            compatible:
+              enum:
+                - qcom,q6afe
+        then:
+          properties:
+            dais:
+              properties:
+                compatible:
+                  const: qcom,q6afe-dais
 
-      '#size-cells':
-        const: 0
+      - if:
+          properties:
+            compatible:
+              enum:
+                - qcom,q6apm
+        then:
+          properties:
+            dais:
+              properties:
+                compatible:
+                  enum:
+                    - qcom,q6apm-dais
+                    - qcom,q6apm-lpass-dais
 
-    patternProperties:
-      "^.*@[0-9a-f]+$":
-        type: object
-        description:
-          Service based devices like clock controllers or digital audio interfaces.
+      - if:
+          properties:
+            compatible:
+              enum:
+                - qcom,q6asm
+        then:
+          properties:
+            dais:
+              properties:
+                compatible:
+                  const: qcom,q6asm-dais
 
     additionalProperties: false
 
@@ -125,6 +195,30 @@ required:
   - compatible
   - qcom,domain
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,gpr
+    then:
+      properties:
+        power-domains: false
+
+  - if:
+      required:
+        - qcom,glink-channels
+    then:
+      properties:
+        qcom,smd-channels: false
+
+  - if:
+      required:
+        - qcom,smd-channels
+    then:
+      properties:
+        qcom,glink-channels: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
new file mode 100644
index 000000000000..c98aab209bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Embedded USB Debugger
+
+maintainers:
+  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+
+description:
+  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
+  mini USB-hub implemented on chip to support USB-based debug capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sc7280-eud
+      - const: qcom,eud
+
+  reg:
+    items:
+      - description: EUD Base Register Region
+      - description: EUD Mode Manager Register
+
+  interrupts:
+    description: EUD interrupt
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      These ports is to be attached to the endpoint of the DWC3 controller node
+      and type C connector node. The controller has the "usb-role-switch"
+      property.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the DWC3 controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: This port is to be attached to the type C connector.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    eud@88e0000 {
+           compatible = "qcom,sc7280-eud","qcom,eud";
+           reg = <0x88e0000 0x2000>,
+                 <0x88e2000 0x1000>;
+           ports {
+                   #address-cells = <1>;
+                   #size-cells = <0>;
+                   port@0 {
+                           reg = <0>;
+                           eud_ep: endpoint {
+                                   remote-endpoint = <&usb2_role_switch>;
+                           };
+                   };
+                   port@1 {
+                           reg = <1>;
+                           eud_con: endpoint {
+                                   remote-endpoint = <&con_eud>;
+                           };
+                   };
+           };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index a776cd37c297..2bf5293fc995 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -7,8 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: GENI Serial Engine QUP Wrapper Controller
 
 maintainers:
-  - Mukesh Savaliya <msavaliy@codeaurora.org>
-  - Akash Asthana <akashast@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
  Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
@@ -64,116 +63,23 @@ required:
   - ranges
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-    description: Common properties for GENI Serial Engine based I2C, SPI and
-                 UART controller.
-
-    properties:
-      reg:
-        description: GENI Serial Engine register address and length.
-        maxItems: 1
-
-      clock-names:
-        const: se
-
-      clocks:
-        description: Serial engine core clock needed by the device.
-        maxItems: 1
-
-      interconnects:
-        minItems: 2
-        maxItems: 3
-
-      interconnect-names:
-        minItems: 2
-        items:
-          - const: qup-core
-          - const: qup-config
-          - const: qup-memory
-
-    required:
-      - reg
-      - clock-names
-      - clocks
-
   "spi@[0-9a-f]+$":
     type: object
     description: GENI serial engine based SPI controller. SPI in master mode
                  supports up to 50MHz, up to four chip selects, programmable
                  data path from 4 bits to 32 bits and numerous protocol
                  variants.
-    $ref: /spi/spi-controller.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-spi
-
-      interrupts:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-    required:
-      - compatible
-      - interrupts
-      - "#address-cells"
-      - "#size-cells"
+    $ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
 
   "i2c@[0-9a-f]+$":
     type: object
     description: GENI serial engine based I2C controller.
-    $ref: /schemas/i2c/i2c-controller.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-i2c
-
-      interrupts:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-      clock-frequency:
-        description: Desired I2C bus clock frequency in Hz.
-        default: 100000
-
-    required:
-      - compatible
-      - interrupts
-      - "#address-cells"
-      - "#size-cells"
+    $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
 
   "serial@[0-9a-f]+$":
     type: object
     description: GENI Serial Engine based UART Controller.
-    $ref: /schemas/serial.yaml#
-
-    properties:
-      compatible:
-        enum:
-          - qcom,geni-uart
-          - qcom,geni-debug-uart
-
-      interrupts:
-        minItems: 1
-        items:
-          - description: UART core irq
-          - description: Wakeup irq (RX GPIO)
-
-    required:
-      - compatible
-      - interrupts
+    $ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
deleted file mode 100644
index fe1855f09dcc..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-QCOM GSBI (General Serial Bus Interface) Driver
-
-The GSBI controller is modeled as a node with zero or more child nodes, each
-representing a serial sub-node device that is mux'd as part of the GSBI
-configuration settings.  The mode setting will govern the input/output mode of
-the 4 GSBI IOs.
-
-Required properties:
-- compatible:	Should contain "qcom,gsbi-v1.0.0"
-- cell-index:	Should contain the GSBI index
-- reg: Address range for GSBI registers
-- clocks: required clock
-- clock-names: must contain "iface" entry
-- qcom,mode : indicates MUX value for configuration of the serial interface.
-  Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
-
-Optional properties:
-- qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
-  dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
-- syscon-tcsr: indicates phandle of TCSR syscon node.  Required if child uses
-  dma.
-
-Required properties if child node exists:
-- #address-cells: Must be 1
-- #size-cells: Must be 1
-- ranges: Must be present
-
-Properties for children:
-
-A GSBI controller node can contain 0 or more child nodes representing serial
-devices.  These serial devices can be a QCOM UART, I2C controller, spi
-controller, or some combination of aforementioned devices.
-
-See the following for child node definitions:
-Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
-
-Example for APQ8064:
-
-#include <dt-bindings/soc/qcom,gsbi.h>
-
-	gsbi4@16300000 {
-		compatible = "qcom,gsbi-v1.0.0";
-		cell-index = <4>;
-		reg = <0x16300000 0x100>;
-		clocks = <&gcc GSBI4_H_CLK>;
-		clock-names = "iface";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		qcom,mode = <GSBI_PROT_I2C_UART>;
-		qcom,crci = <GSBI_CRCI_QUP>;
-
-		syscon-tcsr = <&tcsr>;
-
-		/* child nodes go under here */
-
-		i2c_qup4: i2c@16380000 {
-			compatible = "qcom,i2c-qup-v1.1.1";
-			reg = <0x16380000 0x1000>;
-			interrupts = <0 153 0>;
-
-			clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-			clock-names = "core", "iface";
-
-			clock-frequency = <200000>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-		};
-
-		uart4:	serial@16340000 {
-			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-			reg = <0x16340000 0x1000>,
-				<0x16300000 0x1000>;
-			interrupts = <0 152 0x0>;
-			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-			clock-names = "core", "iface";
-		};
-	};
-
-	tcsr: syscon@1a400000 {
-		compatible = "qcom,apq8064-tcsr", "syscon";
-		reg = <0x1a400000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
new file mode 100644
index 000000000000..c33704333e49
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm General Serial Bus Interface (GSBI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The GSBI controller is modeled as a node with zero or more child nodes, each
+  representing a serial sub-node device that is mux'd as part of the GSBI
+  configuration settings.  The mode setting will govern the input/output mode
+  of the 4 GSBI IOs.
+
+  A GSBI controller node can contain 0 or more child nodes representing serial
+  devices.  These serial devices can be a QCOM UART, I2C controller, spi
+  controller, or some combination of aforementioned devices.
+
+properties:
+  compatible:
+    const: qcom,gsbi-v1.0.0
+
+  '#address-cells':
+    const: 1
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The GSBI index.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iface
+
+  qcom,crci:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      CRCI MUX value for QUP CRCI ports.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+  qcom,mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      MUX value for configuration of the serial interface.  Please reference
+      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+  '#size-cells':
+    const: 1
+
+  syscon-tcsr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of TCSR syscon node.Required if child uses dma.
+
+  ranges: true
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/qcom,spi-qup.yaml#
+
+  "i2c@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/qcom,i2c-qup.yaml#
+
+  "serial@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/serial/qcom,msm-uartdm.yaml#
+
+required:
+  - compatible
+  - cell-index
+  - clocks
+  - clock-names
+  - qcom,mode
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,gsbi.h>
+
+    gsbi@12440000 {
+        compatible = "qcom,gsbi-v1.0.0";
+        reg = <0x12440000 0x100>;
+        cell-index = <1>;
+        clocks = <&gcc GSBI1_H_CLK>;
+        clock-names = "iface";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        syscon-tcsr = <&tcsr>;
+        qcom,mode = <GSBI_PROT_I2C_UART>;
+
+        serial@12450000 {
+            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+            reg = <0x12450000 0x100>,
+                  <0x12400000 0x03>;
+            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+        };
+
+        i2c@12460000 {
+            compatible = "qcom,i2c-qup-v1.1.1";
+            reg = <0x12460000 0x1000>;
+            pinctrl-0 = <&i2c1_pins>;
+            pinctrl-1 = <&i2c1_pins_sleep>;
+            pinctrl-names = "default", "sleep";
+            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+            clock-names = "core", "iface";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            status = "disabled"; /* UART chosen */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
new file mode 100644
index 000000000000..4a50f1d27724
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMH RSC
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Resource Power Manager Hardened (RPMH) is the mechanism for communicating
+  with the hardened resource accelerators on Qualcomm SoCs. Requests to the
+  resources can be written to the Trigger Command Set (TCS)  registers and
+  using a (addr, val) pair and triggered. Messages in the TCS are then sent in
+  sequence over an internal bus.
+
+  The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
+  (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
+  active/wake resource requests. Multiple such DRVs can exist in a SoC and can
+  be written to from Linux. The structure of each DRV follows the same template
+  with a few variations that are captured by the properties here.
+
+  A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
+  have powered off to facilitate idle power saving. TCS could be classified as::
+    ACTIVE  - Triggered by Linux
+    SLEEP   - Triggered by F/W
+    WAKE    - Triggered by F/W
+    CONTROL - Triggered by F/W
+  See also:: <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+  The order in which they are described in the DT, should match the hardware
+  configuration.
+
+  Requests can be made for the state of a resource, when the subsystem is
+  active or idle. When all subsystems like Modem, GPU, CPU are idle, the
+  resource state will be an aggregate of the sleep votes from each of those
+  subsystems. Clients may request a sleep value for their shared resources in
+  addition to the active mode requests.
+
+  Drivers that want to use the RSC to communicate with RPMH must specify their
+  bindings as child nodes of the RSC controllers they wish to communicate with.
+
+properties:
+  compatible:
+    const: qcom,rpmh-rsc
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      The interrupt that trips when a message complete/response is received for
+      this DRV from the accelerators.
+      Number of interrupts must match number of DRV blocks.
+
+  label:
+    description:
+      Name for the RSC. The name would be used in trace logs.
+
+  qcom,drv-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The ID of the DRV in the RSC block that will be used by this controller.
+
+  qcom,tcs-config:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 4
+    maxItems: 4
+    items:
+      items:
+        - description: |
+            TCS type::
+             - ACTIVE_TCS
+             - SLEEP_TCS
+             - WAKE_TCS
+             - CONTROL_TCS
+          enum: [ 0, 1, 2, 3 ]
+        - description: Number of TCS
+    description: |
+      The tuple defining the configuration of TCS. Must have two cells which
+      describe each TCS type.  The order of the TCS must match the hardware
+      configuration.
+
+  qcom,tcs-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The offset of the TCS blocks.
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: drv-0
+      - const: drv-1
+      - const: drv-2
+      - const: drv-3
+
+  bcm-voter:
+    $ref: /schemas/interconnect/qcom,bcm-voter.yaml#
+
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmhcc.yaml#
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
+patternProperties:
+  '-regulators$':
+    $ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
+
+required:
+  - compatible
+  - interrupts
+  - qcom,drv-id
+  - qcom,tcs-config
+  - qcom,tcs-offset
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of
+    // 2, the register offsets for DRV2 start at 0D00, the register
+    // calculations are like this::
+    // DRV0: 0x179C0000
+    // DRV2: 0x179C0000 + 0x10000 = 0x179D0000
+    // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
+    // TCS-OFFSET: 0xD00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@179c0000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x179c0000 0x10000>,
+              <0x179d0000 0x10000>,
+              <0x179e0000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 1>;
+      };
+
+  - |
+    // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
+    // register offsets for DRV0 start at 01C00, the register calculations are
+    // like this::
+    // DRV0: 0xAF20000
+    // TCS-OFFSET: 0x1C00
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+    rsc@af20000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0xaf20000 0x10000>;
+        reg-names = "drv-0";
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+        label = "disp_rsc";
+        qcom,tcs-offset = <0x1c00>;
+        qcom,drv-id = <0>;
+        qcom,tcs-config = <ACTIVE_TCS  0>,
+                          <SLEEP_TCS   1>,
+                          <WAKE_TCS    1>,
+                          <CONTROL_TCS 0>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    rsc@18200000 {
+        compatible = "qcom,rpmh-rsc";
+        reg = <0x18200000 0x10000>,
+              <0x18210000 0x10000>,
+              <0x18220000 0x10000>;
+        reg-names = "drv-0", "drv-1", "drv-2";
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+        label = "apps_rsc";
+        qcom,tcs-offset = <0xd00>;
+        qcom,drv-id = <2>;
+        qcom,tcs-config = <ACTIVE_TCS  2>,
+                          <SLEEP_TCS   3>,
+                          <WAKE_TCS    3>,
+                          <CONTROL_TCS 0>;
+
+        clock-controller {
+            compatible = "qcom,sm8350-rpmh-clk";
+            #clock-cells = <1>;
+            clock-names = "xo";
+            clocks = <&xo_board>;
+        };
+
+        power-controller {
+            compatible = "qcom,sm8350-rpmhpd";
+            #power-domain-cells = <1>;
+            operating-points-v2 = <&rpmhpd_opp_table>;
+
+            rpmhpd_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                rpmhpd_opp_ret: opp1 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                };
+
+                rpmhpd_opp_min_svs: opp2 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                };
+
+                rpmhpd_opp_low_svs: opp3 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                };
+
+                rpmhpd_opp_svs: opp4 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                };
+
+                rpmhpd_opp_svs_l1: opp5 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                };
+
+                rpmhpd_opp_nom: opp6 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                };
+
+                rpmhpd_opp_nom_l1: opp7 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                };
+
+                rpmhpd_opp_nom_l2: opp8 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                };
+
+                rpmhpd_opp_turbo: opp9 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                };
+
+                rpmhpd_opp_turbo_l1: opp10 {
+                    opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                };
+            };
+        };
+
+        bcm-voter {
+            compatible = "qcom,bcm-voter";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index b32457c2fc0b..09d5bfa920f2 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -12,7 +12,7 @@ description: |
   to vote for state of the system resources, such as clocks, regulators and bus
   frequencies.
 
-  The SMD information for the RPM edge should be filled out.  See qcom,smd.txt
+  The SMD information for the RPM edge should be filled out.  See qcom,smd.yaml
   for the required edge properties.  All SMD related properties will reside
   within the RPM node itself.
 
@@ -25,7 +25,8 @@ description: |
   rpm_requests.
 
 maintainers:
-  - Kathiravan T <kathirav@codeaurora.org>
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 properties:
   compatible:
@@ -33,7 +34,9 @@ properties:
       - qcom,rpm-apq8084
       - qcom,rpm-ipq6018
       - qcom,rpm-msm8226
+      - qcom,rpm-msm8909
       - qcom,rpm-msm8916
+      - qcom,rpm-msm8936
       - qcom,rpm-msm8953
       - qcom,rpm-msm8974
       - qcom,rpm-msm8976
@@ -45,6 +48,13 @@ properties:
       - qcom,rpm-qcm2290
       - qcom,rpm-qcs404
 
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmcc.yaml#
+    unevaluatedProperties: false
+
+  power-controller:
+    $ref: /schemas/power/qcom,rpmpd.yaml#
+
   qcom,smd-channels:
     $ref: /schemas/types.yaml#/definitions/string-array
     description: Channel name used for the RPM communication
@@ -82,12 +92,33 @@ examples:
             qcom,ipc = <&apcs 8 0>;
             qcom,smd-edge = <15>;
 
-                rpm_requests {
-                        compatible = "qcom,rpm-msm8974";
-                        qcom,smd-channels = "rpm_requests";
+            rpm-requests {
+                compatible = "qcom,rpm-msm8916";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                    clocks = <&xo_board>;
+                    clock-names = "xo";
+                };
 
-                        /* Regulator nodes to follow */
+                power-controller {
+                    compatible = "qcom,msm8916-rpmpd";
+                    #power-domain-cells = <1>;
+                    operating-points-v2 = <&rpmpd_opp_table>;
+
+                    rpmpd_opp_table: opp-table {
+                        compatible = "operating-points-v2";
+
+                        opp-1 {
+                            opp-level = <1>;
+                        };
+                        opp-2 {
+                            opp-level = <2>;
+                        };
+                    };
                 };
             };
-     };
-...
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
deleted file mode 100644
index 234ae2256501..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Qualcomm Shared Memory Driver (SMD) binding
-
-This binding describes the Qualcomm Shared Memory Driver, a fifo based
-communication channel for sending data between the various subsystems in
-Qualcomm platforms.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,smd"
-
-= EDGES
-
-Each subnode of the SMD node represents a remote subsystem or a remote
-processor of some sort - or in SMD language an "edge". The name of the edges
-are not important.
-The edge is described by the following properties:
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the IRQ used by the remote processor to
-		    signal this processor about communication related updates
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the associated doorbell in APCS, as described
-		    in mailbox/mailbox.txt
-
-- qcom,ipc:
-	Usage: required, unless mboxes is specified
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the remote processor:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,smd-edge:
-	Usage: required
-	Value type: <u32>
-	Definition: the identifier of the remote processor in the smd channel
-		    allocation table
-
-- qcom,remote-pid:
-	Usage: optional
-	Value type: <u32>
-	Definition: the identifier for the remote processor as known by the rest
-		    of the system.
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: name of the edge, used for debugging and identification
-		    purposes. The node name will be used if this is not
-		    present.
-
-= SMD DEVICES
-
-In turn, subnodes of the "edges" represent devices tied to SMD channels on that
-"edge". The names of the devices are not important. The properties of these
-nodes are defined by the individual bindings for the SMD devices - but must
-contain the following property:
-
-- qcom,smd-channels:
-	Usage: required
-	Value type: <stringlist>
-	Definition: a list of channels tied to this device, used for matching
-		    the device to channels
-
-= EXAMPLE
-
-The following example represents a smd node, with one edge representing the
-"rpm" subsystem. For the "rpm" subsystem we have a device tied to the
-"rpm_request" channel.
-
-	apcs: syscon@f9011000 {
-		compatible = "syscon";
-		reg = <0xf9011000 0x1000>;
-	};
-
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
-
-				...
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
new file mode 100644
index 000000000000..063e595c12f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Driver
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Qualcomm Shared Memory Driver is a FIFO based communication channel for
+  sending data between the various subsystems in Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,smd
+
+patternProperties:
+  "^smd-edge|rpm$":
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    unevaluatedProperties: false
+    description:
+      Each subnode of the SMD node represents a remote subsystem or a remote
+      processor of some sort - or in SMD language an "edge". The name of the
+      edges are not important.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  # The following example represents a smd node, with one edge representing the
+  # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the
+  # "rpm_request" channel.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smd";
+
+        rpm {
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,ipc = <&apcs 8 0>;
+            qcom,smd-edge = <15>;
+
+            rpm-requests {
+                compatible = "qcom,rpm-msm8974";
+                qcom,smd-channels = "rpm_requests";
+
+                clock-controller {
+                    compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+                    #clock-cells = <1>;
+                };
+
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
deleted file mode 100644
index 49e1d72d3648..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-Qualcomm Shared Memory Point 2 Point binding
-
-The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
-a single 32-bit value between two processors.  Each value has a single writer
-(the local side) and a single reader (the remote side).  Values are uniquely
-identified in the system by the directed edge (local processor ID to remote
-processor ID) and a string identifier.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,smp2p"
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: one entry specifying the smp2p notification interrupt
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the associated doorbell in APCS, as described
-		    in mailbox/mailbox.txt
-
-- qcom,ipc:
-	Usage: required, unless mboxes is specified
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the remote end of the smp2p edge:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,smem:
-	Usage: required
-	Value type: <u32 array>
-	Definition: two identifiers of the inbound and outbound smem items used
-		    for this edge
-
-- qcom,local-pid:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the identifier of the local endpoint of this edge
-
-- qcom,remote-pid:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the identifier of the remote endpoint of this edge
-
-= SUBNODES
-Each SMP2P pair contain a set of inbound and outbound entries, these are
-described in subnodes of the smp2p device node. The node names are not
-important.
-
-- qcom,entry-name:
-	Usage: required
-	Value type: <string>
-	Definition: specifies the name of this entry, for inbound entries this
-		    will be used to match against the remotely allocated entry
-		    and for outbound entries this name is used for allocating
-		    entries
-
-- interrupt-controller:
-	Usage: required for incoming entries
-	Value type: <empty>
-	Definition: marks the entry as inbound; the node should be specified
-		    as a two cell interrupt-controller as defined in
-		    "../interrupt-controller/interrupts.txt"
-		    If not specified this node will denote the outgoing entry
-
-- #interrupt-cells:
-	Usage: required for incoming entries
-	Value type: <u32>
-	Definition: must be 2 - denoting the bit in the entry and IRQ flags
-
-- #qcom,smem-state-cells:
-	Usage: required for outgoing entries
-	Value type: <u32>
-	Definition: must be 1 - denoting the bit in the entry
-
-= EXAMPLE
-The following example shows the SMP2P setup with the wireless processor,
-defined from the 8974 apps processor's point-of-view. It encompasses one
-inbound and one outbound entry:
-
-wcnss-smp2p {
-	compatible = "qcom,smp2p";
-	qcom,smem = <431>, <451>;
-
-	interrupts = <0 143 1>;
-
-	qcom,ipc = <&apcs 8 18>;
-
-	qcom,local-pid = <0>;
-	qcom,remote-pid = <4>;
-
-	wcnss_smp2p_out: master-kernel {
-		qcom,entry-name = "master-kernel";
-
-		#qcom,smem-state-cells = <1>;
-	};
-
-	wcnss_smp2p_in: slave-kernel {
-		qcom,entry-name = "slave-kernel";
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
new file mode 100644
index 000000000000..795bd8cd4104
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory Point 2 Point
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory Point to Point (SMP2P) protocol facilitates communication
+  of a single 32-bit value between two processors.  Each value has a single
+  writer (the local side) and a single reader (the remote side).  Values are
+  uniquely identified in the system by the directed edge (local processor ID to
+  remote processor ID) and a string identifier.
+
+properties:
+  compatible:
+    const: qcom,smp2p
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+    description:
+      Reference to the mailbox representing the outgoing doorbell in APCS for
+      this client.
+
+  qcom,ipc:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the
+      remote end of the smp2p edge.
+
+  qcom,local-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the local endpoint of this edge.
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier of the remote endpoint of this edge.
+
+  qcom,smem:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maxItems: 2
+    description:
+      Two identifiers of the inbound and outbound smem items used for this edge.
+
+patternProperties:
+  "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap$":
+    type: object
+    description:
+      Each SMP2P pair contain a set of inbound and outbound entries, these are
+      described in subnodes of the smp2p device node. The node names are not
+      important.
+
+    properties:
+      interrupt-controller:
+        description:
+          Marks the entry as inbound; the node should be specified as a two
+          cell interrupt-controller.  If not specified this node will denote
+          the outgoing entry.
+
+      '#interrupt-cells':
+        const: 2
+
+      qcom,entry-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          The name of this entry, for inbound entries this will be used to
+          match against the remotely allocated entry and for outbound entries
+          this name is used for allocating entries.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for outgoing entries.
+
+    required:
+      - qcom,entry-name
+
+    oneOf:
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+      - required:
+          - '#qcom,smem-state-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - qcom,local-pid
+  - qcom,remote-pid
+  - qcom,smem
+
+oneOf:
+  - required:
+      - mboxes
+  - required:
+      - qcom,ipc
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMP2P setup with the wireless processor,
+  # defined from the 8974 apps processor's point-of-view. It encompasses one
+  # inbound and one outbound entry.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smp2p";
+        qcom,smem = <431>, <451>;
+        interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+        qcom,ipc = <&apcs 8 18>;
+        qcom,local-pid = <0>;
+        qcom,remote-pid = <4>;
+
+        wcnss_smp2p_out: master-kernel {
+            qcom,entry-name = "master-kernel";
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smp2p_in: slave-kernel {
+            qcom,entry-name = "slave-kernel";
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
deleted file mode 100644
index 2993b5a97dd6..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-Qualcomm Shared Memory State Machine
-
-The Shared Memory State Machine facilitates broadcasting of single bit state
-information between the processors in a Qualcomm SoC. Each processor is
-assigned 32 bits of state that can be modified. A processor can through a
-matrix of bitmaps signal subscription of notifications upon changes to a
-certain bit owned by a certain remote processor.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,smsm"
-
-- qcom,ipc-N:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the N:th remote processor
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-- qcom,local-host:
-	Usage: optional
-	Value type: <u32>
-	Definition: identifier of the local processor in the list of hosts, or
-		    in other words specifier of the column in the subscription
-		    matrix representing the local processor
-		    defaults to host 0
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 0
-
-= SUBNODES
-Each processor's state bits are described by a subnode of the smsm device node.
-Nodes can either be flagged as an interrupt-controller to denote a remote
-processor's state bits or the local processors bits.  The node names are not
-important.
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: specifies the offset, in words, of the first bit for this
-		    entry
-
-- #qcom,smem-state-cells:
-	Usage: required for local entry
-	Value type: <u32>
-	Definition: must be 1 - denotes bit number
-
-- interrupt-controller:
-	Usage: required for remote entries
-	Value type: <empty>
-	Definition: marks the entry as a interrupt-controller and the state bits
-		    to belong to a remote processor
-
-- #interrupt-cells:
-	Usage: required for remote entries
-	Value type: <u32>
-	Definition: must be 2 - denotes bit number and IRQ flags
-
-- interrupts:
-	Usage: required for remote entries
-	Value type: <prop-encoded-array>
-	Definition: one entry specifying remote IRQ used by the remote processor
-		    to signal changes of its state bits
-
-
-= EXAMPLE
-The following example shows the SMEM setup for controlling properties of the
-wireless processor, defined from the 8974 apps processor's point-of-view. It
-encompasses one outbound entry and the outgoing interrupt for the wireless
-processor.
-
-smsm {
-	compatible = "qcom,smsm";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	qcom,ipc-3 = <&apcs 8 19>;
-
-	apps_smsm: apps@0 {
-		reg = <0>;
-
-		#qcom,smem-state-cells = <1>;
-	};
-
-	wcnss_smsm: wcnss@7 {
-		reg = <7>;
-		interrupts = <0 144 1>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
new file mode 100644
index 000000000000..db67cf043256
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Shared Memory State Machine
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The Shared Memory State Machine facilitates broadcasting of single bit state
+  information between the processors in a Qualcomm SoC. Each processor is
+  assigned 32 bits of state that can be modified. A processor can through a
+  matrix of bitmaps signal subscription of notifications upon changes to a
+  certain bit owned by a certain remote processor.
+
+properties:
+  compatible:
+    const: qcom,smsm
+
+  '#address-cells':
+    const: 1
+
+  qcom,local-host:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description:
+      Identifier of the local processor in the list of hosts, or in other words
+      specifier of the column in the subscription matrix representing the local
+      processor.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^qcom,ipc-[1-4]$":
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to a syscon node representing the APCS registers
+          - description: u32 representing offset to the register within the syscon
+          - description: u32 representing the ipc bit within the register
+    description:
+      Three entries specifying the outgoing ipc bit used for signaling the N:th
+      remote processor.
+
+  "@[0-9a-f]$":
+    type: object
+    description:
+      Each processor's state bits are described by a subnode of the SMSM device
+      node.  Nodes can either be flagged as an interrupt-controller to denote a
+      remote processor's state bits or the local processors bits.  The node
+      names are not important.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      interrupt-controller:
+        description:
+          Marks the entry as a interrupt-controller and the state bits to
+          belong to a remote processor.
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupts:
+        maxItems: 1
+        description:
+          One entry specifying remote IRQ used by the remote processor to
+          signal changes of its state bits.
+
+      '#qcom,smem-state-cells':
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 1
+        description:
+          Required for local entry. Denotes bit number.
+
+    required:
+      - reg
+
+    oneOf:
+      - required:
+          - '#qcom,smem-state-cells'
+      - required:
+          - interrupt-controller
+          - '#interrupt-cells'
+          - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+
+anyOf:
+  - required:
+      - qcom,ipc-1
+  - required:
+      - qcom,ipc-2
+  - required:
+      - qcom,ipc-3
+  - required:
+      - qcom,ipc-4
+
+additionalProperties: false
+
+examples:
+  # The following example shows the SMEM setup for controlling properties of
+  # the wireless processor, defined from the 8974 apps processor's
+  # point-of-view. It encompasses one outbound entry and the outgoing interrupt
+  # for the wireless processor.
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    shared-memory {
+        compatible = "qcom,smsm";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,ipc-3 = <&apcs 8 19>;
+
+        apps_smsm: apps@0 {
+            reg = <0>;
+            #qcom,smem-state-cells = <1>;
+        };
+
+        wcnss_smsm: wcnss@7 {
+            reg = <7>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
index 07d2d5398345..f433e6e0a19f 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml
@@ -22,6 +22,7 @@ properties:
           - qcom,sdm660-silver-saw2-v4.1-l2
           - qcom,msm8998-gold-saw2-v4.1-l2
           - qcom,msm8998-silver-saw2-v4.1-l2
+          - qcom,msm8909-saw2-v3.0-cpu
           - qcom,msm8916-saw2-v3.0-cpu
           - qcom,msm8226-saw2-v2.1-cpu
           - qcom,msm8974-saw2-v2.1-cpu
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
deleted file mode 100644
index 1382b64e1381..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Qualcomm WCNSS Binding
-
-This binding describes the Qualcomm WCNSS hardware. It consists of control
-block and a BT, WiFi and FM radio block, all using SMD as command channels.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be: "qcom,wcnss",
-
-- qcom,smd-channel:
-	Usage: required
-	Value type: <string>
-	Definition: standard SMD property specifying the SMD channel used for
-		    communication with the WiFi firmware.
-		    Should be "WCNSS_CTRL".
-
-- qcom,mmio:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to a node specifying the wcnss "ccu" and "dxe"
-		    register blocks. The node must be compatible with one of
-		    the following:
-		    "qcom,riva",
-		    "qcom,pronto"
-
-- firmware-name:
-	Usage: optional
-	Value type: <string>
-	Definition: specifies the relative firmware image path for the WLAN NV
-		    blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
-		    not specified.
-
-= SUBNODES
-The subnodes of the wcnss node are optional and describe the individual blocks in
-the WCNSS.
-
-== Bluetooth
-The following properties are defined to the bluetooth node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be:
-		    "qcom,wcnss-bt"
-
-- local-bd-address:
-	Usage: optional
-	Value type: <u8 array>
-	Definition: see Documentation/devicetree/bindings/net/bluetooth.txt
-
-== WiFi
-The following properties are defined to the WiFi node:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,wcnss-wlan",
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the "rx" and "tx" interrupts
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "rx" and "tx"
-
-- qcom,smem-state:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should reference the tx-enable and tx-rings-empty SMEM states
-
-- qcom,smem-state-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must contain "tx-enable" and "tx-rings-empty"
-
-= EXAMPLE
-The following example represents a SMD node, with one edge representing the
-"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
-described; as found on the 8974 platform.
-
-smd {
-	compatible = "qcom,smd";
-
-	pronto-edge {
-		interrupts = <0 142 1>;
-
-		qcom,ipc = <&apcs 8 17>;
-		qcom,smd-edge = <6>;
-
-		wcnss {
-			compatible = "qcom,wcnss";
-			qcom,smd-channels = "WCNSS_CTRL";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qcom,mmio = <&pronto>;
-
-			bt {
-				compatible = "qcom,wcnss-bt";
-
-				/* BD address 00:11:22:33:44:55 */
-				local-bd-address = [ 55 44 33 22 11 00 ];
-			};
-
-			wlan {
-				compatible = "qcom,wcnss-wlan";
-
-				interrupts = <0 145 0>, <0 146 0>;
-				interrupt-names = "tx", "rx";
-
-				qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
-				qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-			};
-		};
-	};
-};
-
-soc {
-	pronto: pronto {
-		compatible = "qcom,pronto";
-
-		reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-		reg-names = "ccu", "dxe", "pmu";
-	};
-};
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
new file mode 100644
index 000000000000..5320504bb5e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM
+  radio block, all using SMD as command channels.
+
+properties:
+  compatible:
+    const: qcom,wcnss
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: "wlan/prima/WCNSS_qcom_wlan_nv.bin"
+    description:
+      Relative firmware image path for the WLAN NV blob.
+
+  qcom,mmio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to a node specifying the wcnss "ccu" and "dxe" register blocks.
+      The node must be compatible with one of the following::
+           - qcom,riva"
+           - qcom,pronto"
+
+  qcom,smd-channels:
+    $ref: /schemas/types.yaml#/definitions/string
+    const: WCNSS_CTRL
+    description:
+      Standard SMD property specifying the SMD channel used for communication
+      with the WiFi firmware.
+
+  bluetooth:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: qcom,wcnss-bt
+
+      local-bd-address:
+        $ref: /schemas/types.yaml#/definitions/uint8-array
+        maxItems: 6
+        description:
+          See Documentation/devicetree/bindings/net/bluetooth.txt
+
+    required:
+      - compatible
+
+  wifi:
+    additionalProperties: false
+    type: object
+    properties:
+      compatible:
+        const: qcom,wcnss-wlan
+
+      interrupts:
+        maxItems: 2
+
+      interrupt-names:
+        items:
+          - const: tx
+          - const: rx
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 2
+        description:
+          Should reference the tx-enable and tx-rings-empty SMEM states.
+
+      qcom,smem-state-names:
+        items:
+          - const: tx-enable
+          - const: tx-rings-empty
+        description:
+          Names of SMEM states.
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - qcom,smem-states
+      - qcom,smem-state-names
+
+required:
+  - compatible
+  - qcom,mmio
+  - qcom,smd-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    smd-edge {
+        interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+        qcom,ipc = <&apcs 8 17>;
+        qcom,smd-edge = <6>;
+        qcom,remote-pid = <4>;
+
+        label = "pronto";
+
+        wcnss {
+            compatible = "qcom,wcnss";
+            qcom,smd-channels = "WCNSS_CTRL";
+
+            qcom,mmio = <&pronto>;
+
+            bluetooth {
+                compatible = "qcom,wcnss-bt";
+                /* BD address 00:11:22:33:44:55 */
+                local-bd-address = [ 55 44 33 22 11 00 ];
+            };
+
+            wifi {
+                compatible = "qcom,wcnss-wlan";
+
+                interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                             <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-names = "tx", "rx";
+
+                qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
index 473adca4e973..48eda4d0d391 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml
@@ -20,6 +20,7 @@ properties:
   compatible:
     enum:
       - qcom,rpmh-stats
+      - qcom,sdm845-rpmh-stats
       - qcom,rpm-stats
       # For older RPM firmware versions with fixed offset for the sleep stats
       - qcom,apq8084-rpm-stats
diff --git a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt b/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
deleted file mode 100644
index 9b86d1eff219..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-RPMH RSC:
-------------
-
-Resource Power Manager Hardened (RPMH) is the mechanism for communicating with
-the hardened resource accelerators on Qualcomm SoCs. Requests to the resources
-can be written to the Trigger Command Set (TCS)  registers and using a (addr,
-val) pair and triggered. Messages in the TCS are then sent in sequence over an
-internal bus.
-
-The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity
-(Resource State Coordinator a.k.a RSC) that can handle multiple sleep and
-active/wake resource requests. Multiple such DRVs can exist in a SoC and can
-be written to from Linux. The structure of each DRV follows the same template
-with a few variations that are captured by the properties here.
-
-A TCS may be triggered from Linux or triggered by the F/W after all the CPUs
-have powered off to facilitate idle power saving. TCS could be classified as -
-
-	ACTIVE  /* Triggered by Linux */
-	SLEEP   /* Triggered by F/W */
-	WAKE    /* Triggered by F/W */
-	CONTROL /* Triggered by F/W */
-
-The order in which they are described in the DT, should match the hardware
-configuration.
-
-Requests can be made for the state of a resource, when the subsystem is active
-or idle. When all subsystems like Modem, GPU, CPU are idle, the resource state
-will be an aggregate of the sleep votes from each of those subsystems. Clients
-may request a sleep value for their shared resources in addition to the active
-mode requests.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "qcom,rpmh-rsc".
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: The first register specifies the base address of the
-		    DRV(s). The number of DRVs in the dependent on the RSC.
-	            The tcs-offset specifies the start address of the
-	            TCS in the DRVs.
-
-- reg-names:
-	Usage: required
-	Value type: <string>
-	Definition: Maps the register specified in the reg property. Must be
-	            "drv-0", "drv-1", "drv-2" etc and "tcs-offset". The
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-interrupt>
-	Definition: The interrupt that trips when a message complete/response
-	           is received for this DRV from the accelerators.
-
-- qcom,drv-id:
-	Usage: required
-	Value type: <u32>
-	Definition: The id of the DRV in the RSC block that will be used by
-		    this controller.
-
-- qcom,tcs-config:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: The tuple defining the configuration of TCS.
-	            Must have 2 cells which describe each TCS type.
-	            <type number_of_tcs>.
-	            The order of the TCS must match the hardware
-	            configuration.
-	- Cell #1 (TCS Type): TCS types to be specified -
-	            ACTIVE_TCS
-	            SLEEP_TCS
-	            WAKE_TCS
-	            CONTROL_TCS
-	- Cell #2 (Number of TCS): <u32>
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: Name for the RSC. The name would be used in trace logs.
-
-Drivers that want to use the RSC to communicate with RPMH must specify their
-bindings as child nodes of the RSC controllers they wish to communicate with.
-
-Example 1:
-
-For a TCS whose RSC base address is is 0x179C0000 and is at a DRV id of 2, the
-register offsets for DRV2 start at 0D00, the register calculations are like
-this -
-DRV0: 0x179C0000
-DRV2: 0x179C0000 + 0x10000 = 0x179D0000
-DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000
-TCS-OFFSET: 0xD00
-
-	apps_rsc: rsc@179c0000 {
-		label = "apps_rsc";
-		compatible = "qcom,rpmh-rsc";
-		reg = <0x179c0000 0x10000>,
-		      <0x179d0000 0x10000>,
-		      <0x179e0000 0x10000>;
-		reg-names = "drv-0", "drv-1", "drv-2";
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-		qcom,tcs-offset = <0xd00>;
-		qcom,drv-id = <2>;
-		qcom,tcs-config = <ACTIVE_TCS  2>,
-				  <SLEEP_TCS   3>,
-				  <WAKE_TCS    3>,
-				  <CONTROL_TCS 1>;
-	};
-
-Example 2:
-
-For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the
-register offsets for DRV0 start at 01C00, the register calculations are like
-this -
-DRV0: 0xAF20000
-TCS-OFFSET: 0x1C00
-
-	disp_rsc: rsc@af20000 {
-		label = "disp_rsc";
-		compatible = "qcom,rpmh-rsc";
-		reg = <0xaf20000 0x10000>;
-		reg-names = "drv-0";
-		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		qcom,tcs-offset = <0x1c00>;
-		qcom,drv-id = <0>;
-		qcom,tcs-config = <ACTIVE_TCS  0>,
-				  <SLEEP_TCS   1>,
-				  <WAKE_TCS    1>,
-				  <CONTROL_TCS 0>;
-	};
diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
index 84ddc772b003..398663d21ab1 100644
--- a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
@@ -1,17 +1,17 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#"
+$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas RZ/G2L System Controller (SYSC)
+title: Renesas RZ/{G2L,V2L} System Controller (SYSC)
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description:
-  The RZ/G2L System Controller (SYSC) performs system control of the LSI and
-  supports following functions,
+  The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of
+  the LSI and supports following functions,
   - External terminal state capture function
   - 34-bit address space access function
   - Low power consumption control
@@ -20,7 +20,9 @@ description:
 properties:
   compatible:
     enum:
+      - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five
       - renesas,r9a07g044-sysc # RZ/G2{L,LC}
+      - renesas,r9a07g054-sysc # RZ/V2L
 
   reg:
     maxItems: 1
@@ -42,8 +44,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-names
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index dfebf425ca49..2ed8cca79b59 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -15,6 +15,13 @@ properties:
       - items:
           - enum:
               - rockchip,rk3288-sgrf
+              - rockchip,rk3566-pipe-grf
+              - rockchip,rk3568-pcie3-phy-grf
+              - rockchip,rk3568-pipe-grf
+              - rockchip,rk3568-pipe-phy-grf
+              - rockchip,rk3568-usb2phy-grf
+              - rockchip,rk3588-pcie3-phy-grf
+              - rockchip,rk3588-pcie3-pipe-grf
               - rockchip,rv1108-usbgrf
           - const: syscon
       - items:
@@ -24,6 +31,7 @@ properties:
               - rockchip,px30-usb2phy-grf
               - rockchip,rk3036-grf
               - rockchip,rk3066-grf
+              - rockchip,rk3128-grf
               - rockchip,rk3188-grf
               - rockchip,rk3228-grf
               - rockchip,rk3288-grf
@@ -41,6 +49,8 @@ properties:
               - rockchip,rk3568-pmugrf
               - rockchip,rv1108-grf
               - rockchip,rv1108-pmugrf
+              - rockchip,rv1126-grf
+              - rockchip,rv1126-pmugrf
           - const: syscon
           - const: simple-mfd
 
@@ -174,6 +184,7 @@ allOf:
           contains:
             enum:
               - rockchip,px30-usb2phy-grf
+              - rockchip,rk3128-grf
               - rockchip,rk3228-grf
               - rockchip,rk3308-usb2phy-grf
               - rockchip,rk3328-usb2phy-grf
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
index c30a6437030d..13bb8dfcefe6 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml
@@ -49,9 +49,6 @@ properties:
   reg:
     maxItems: 1
 
-  assigned-clock-parents: true
-  assigned-clocks: true
-
   '#clock-cells':
     const: 1
 
@@ -77,14 +74,20 @@ properties:
       Must be identical to the that of the parent interrupt controller.
     const: 3
 
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml
+    type: object
+    description:
+      Reboot mode to alter bootloader behavior for the next boot
+
   syscon-poweroff:
-    $ref: "../../power/reset/syscon-poweroff.yaml#"
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
     type: object
     description:
       Node for power off method
 
   syscon-reboot:
-    $ref: "../../power/reset/syscon-reboot.yaml#"
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
     type: object
     description:
       Node for reboot method
diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
index 273f2d95a043..60b49562ff69 100644
--- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
+++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
@@ -8,7 +8,7 @@ title: Samsung's Exynos USI (Universal Serial Interface) binding
 
 maintainers:
   - Sam Protsenko <semen.protsenko@linaro.org>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C).
@@ -17,20 +17,17 @@ description: |
   child nodes, each representing a serial sub-node device. The mode setting
   selects which particular function will be used.
 
-  Refer to next bindings documentation for information on protocol subnodes that
-  can exist under USI node:
-
-  [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
-  [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
-  [3] Documentation/devicetree/bindings/spi/spi-samsung.txt
-
 properties:
   $nodename:
     pattern: "^usi@[0-9a-f]+$"
 
   compatible:
-    enum:
-      - samsung,exynos850-usi   # for USIv2 (Exynos850, ExynosAutoV9)
+    oneOf:
+      - items:
+          - const: samsung,exynosautov9-usi
+          - const: samsung,exynos850-usi
+      - enum:
+          - samsung,exynos850-usi
 
   reg: true
 
@@ -48,6 +45,10 @@ properties:
 
   samsung,sysreg:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register syscon node
+          - description: offset of SW_CONF register for this USI controller
     description:
       Should be phandle/offset pair. The phandle to System Register syscon node
       (for the same domain where this USI controller resides) and the offset
@@ -71,10 +72,17 @@ properties:
       This property is optional.
 
 patternProperties:
-  # All other properties should be child nodes
-  "^(serial|spi|i2c)@[0-9a-f]+$":
-    type: object
-    description: Child node describing underlying USI serial protocol
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/i2c-exynos5.yaml
+    description: Child node describing underlying I2C
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+    description: Child node describing underlying UART/serial
+
+  "^spi@[0-9a-f]+$":
+    $ref: /schemas/spi/samsung,spi.yaml
+    description: Child node describing underlying SPI
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 9d128b9e7deb..847873289f25 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -65,10 +65,11 @@ properties:
       - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0
       - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1
       - ti,am5728-pruss  # for AM57xx SoC family
-      - ti,k2g-pruss     # for 66AK2G SoC family
+      - ti,am625-pruss   # for K3 AM62x SoC family
+      - ti,am642-icssg   # for K3 AM64x SoC family
       - ti,am654-icssg   # for K3 AM65x SoC family
       - ti,j721e-icssg   # for K3 J721E SoC family
-      - ti,am642-icssg   # for K3 AM64x SoC family
+      - ti,k2g-pruss     # for 66AK2G SoC family
 
   reg:
     maxItems: 1
@@ -281,10 +282,7 @@ patternProperties:
       PRUSS INTC Node. Each PRUSS has a single interrupt controller instance
       that is common to all the PRU cores. This should be represented as an
       interrupt-controller node.
-
-    allOf:
-      - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
-
+    $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
     type: object
 
   mdio@[a-f0-9]+$:
@@ -292,10 +290,7 @@ patternProperties:
       MDIO Node. Each PRUSS has an MDIO module that can be used to control
       external PHYs. The MDIO module used within the PRU-ICSS is an instance of
       the MDIO Controller used in TI Davinci SoCs.
-
-    allOf:
-      - $ref: /schemas/net/ti,davinci-mdio.yaml#
-
+    $ref: /schemas/net/ti,davinci-mdio.yaml#
     type: object
 
   "^(pru|rtu|txpru)@[0-9a-f]+$":
@@ -305,10 +300,7 @@ patternProperties:
       inactive by using the standard DT string property, "status". The ICSSG IP
       present on K3 SoCs have additional auxiliary PRU cores with slightly
       different IP integration.
-
-    allOf:
-      - $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
-
+    $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
     type: object
 
 required:
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
new file mode 100644
index 000000000000..0df41c4f60c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wakeup M3 IPC device
+
+maintainers:
+  - Dave Gerlach <d-gerlach@ti.com>
+  - Drew Fustini <dfustini@baylibre.com>
+
+description: |+
+  The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+  (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+  that cannot be controlled from the MPU, like suspend/resume and certain deep
+  C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
+  to boot the wkup_m3, it handles communication with the CM3 using IPC registers
+  present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
+  API to allow the SoC PM code to execute specific PM tasks.
+
+  Wkup M3 Device Node
+  ====================
+  A wkup_m3_ipc device node is used to represent the IPC registers within an
+  SoC.
+
+  Support for VTT Toggle with GPIO pin
+  ====================================
+  On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is
+  connected to the enable pin on the DDR VTT regulator. This allows the
+  regulator to be disabled upon suspend and enabled upon resume. Please note
+  that the GPIO pin must be part of the GPIO0 module as only this GPIO module
+  is in the wakeup power domain.
+
+  Support for IO Isolation
+  ========================
+  On AM437x SoCs, certain pins can be forced into an alternate state when IO
+  isolation is activated. Those pins have pad control registers prefixed by
+  'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can
+  override the pin's existing bias (pull-up/pull-down) and value (high/low) when
+  IO isolation is active.
+
+  Support for I2C PMIC Voltage Scaling
+  ====================================
+  It is possible to pass the name of a binary file to load into the CM3 memory.
+  The binary data is the I2C sequences for the CM3 to send out to the PMIC
+  during low power mode entry.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-wkup-m3-ipc # for AM33xx SoCs
+      - ti,am4372-wkup-m3-ipc # for AM43xx SoCs
+
+  reg:
+    description:
+      The IPC register address space to communicate with the Wakeup M3 processor
+    maxItems: 1
+
+  interrupts:
+    description: wkup_m3 interrupt that signals the MPU
+    maxItems: 1
+
+  ti,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the wkup_m3 rproc node so the IPC driver can boot it
+
+  mboxes:
+    description:
+      phandles used by IPC framework to get correct mbox
+      channel for communication. Must point to appropriate
+      mbox_wkupm3 child node.
+    maxItems: 1
+
+  firmware-name:
+    description:
+      Name of binary file with I2C sequences for PMIC voltage scaling
+
+  ti,vtt-gpio-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: GPIO pin connected to enable pin on VTT regulator
+
+  ti,set-io-isolation:
+    type: boolean
+    description:
+      If this property is present, then the wkup_m3_ipc driver will instruct
+      the CM3 firmware to activate IO isolation when suspending to deep sleep.
+      This can be leveraged by a board design to put other devices on the board
+      into a low power state.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: ti,am4372-wkup-m3-ipc
+    then:
+      properties:
+        ti,set-io-isolation: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ti,rproc
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    /* Example for AM335x SoC */
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        am335x_mailbox: mailbox {
+            #mbox-cells = <1>;
+        };
+
+        wkup_m3_ipc@1324 {
+           compatible = "ti,am3352-wkup-m3-ipc";
+           reg = <0x1324 0x24>;
+           interrupts = <78>;
+           ti,rproc = <&wkup_m3>;
+           mboxes = <&am335x_mailbox &mbox_wkupm3>;
+           ti,vtt-gpio-pin = <7>;
+           firmware-name = "am335x-evm-scale-data.bin";
+        };
+    };
+
+  - |
+    /*
+     * Example for AM473x SoC:
+     * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT
+     * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7
+     * for pull-up during normal system operation. However, the DS0 (deep sleep)
+     * state of the pin is configured for pull-down and thus the VTT regulator
+     * will be disabled to save power when IO isolation is active. Note that
+     * this method is an alternative to using the 'ti,vtt-gpio-pin' property.
+     */
+    #include <dt-bindings/pinctrl/am43xx.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        am437x_mailbox: mailbox {
+            #mbox-cells = <1>;
+        };
+
+        am43xx_pinmux {
+            pinctrl-names = "default";
+            pinctrl-0 = <&ddr3_vtt_toggle_default>;
+
+            ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+                 pinctrl-single,pins = <
+                    0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7)
+                 >;
+            };
+        };
+
+        wkup_m3_ipc@1324 {
+           compatible = "ti,am4372-wkup-m3-ipc";
+           reg = <0x1324 0x24>;
+           interrupts = <78>;
+           ti,rproc = <&wkup_m3>;
+           mboxes = <&am437x_mailbox &mbox_wkupm3>;
+           ti,set-io-isolation;
+           firmware-name = "am43x-evm-scale-data.bin";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
deleted file mode 100644
index 401550487ed6..000000000000
--- a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Wakeup M3 IPC Driver
-=====================
-
-The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
-(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
-that cannot be controlled from the MPU, like suspend/resume and certain deep
-C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
-to boot the wkup_m3, it handles communication with the CM3 using IPC registers
-present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
-API to allow the SoC PM code to execute specific PM tasks.
-
-Wkup M3 Device Node:
-====================
-A wkup_m3_ipc device node is used to represent the IPC registers within an
-SoC.
-
-Required properties:
---------------------
-- compatible:		Should be,
-				"ti,am3352-wkup-m3-ipc" for AM33xx SoCs
-				"ti,am4372-wkup-m3-ipc" for AM43xx SoCs
-- reg:			Contains the IPC register address space to communicate
-			with the Wakeup M3 processor
-- interrupts:		Contains the interrupt information for the wkup_m3
-			interrupt that signals the MPU.
-- ti,rproc:		phandle to the wkup_m3 rproc node so the IPC driver
-			can boot it.
-- mboxes:		phandles used by IPC framework to get correct mbox
-			channel for communication. Must point to appropriate
-			mbox_wkupm3 child node.
-
-Example:
---------
-/* AM33xx */
-	l4_wkup: l4_wkup@44c00000 {
-		...
-
-		scm: scm@210000 {
-			compatible = "ti,am3-scm", "simple-bus";
-			reg = <0x210000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x210000 0x2000>;
-
-			...
-
-			wkup_m3_ipc: wkup_m3_ipc@1324 {
-				compatible = "ti,am3352-wkup-m3-ipc";
-				reg = <0x1324 0x24>;
-				interrupts = <78>;
-				ti,rproc = <&wkup_m3>;
-				mboxes = <&mailbox &mbox_wkupm3>;
-			};
-
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
index 701449311fec..59f7c60a14ba 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -64,4 +64,3 @@ examples:
         clock-frequency = <12288000>;
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
index b80454ad97da..847b83398d3d 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml
@@ -32,8 +32,6 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   AVDD-supply:
     description: Analog power support for the device.
 
@@ -52,7 +50,10 @@ required:
   - compatible
   - AVDD-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
new file mode 100644
index 000000000000..fd5aa61b467f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/adi,max98396.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX98396 Speaker Amplifier
+
+maintainers:
+  - Ryan Lee <ryans.lee@analog.com>
+
+description:
+  The MAX98396 is a mono Class-DG speaker amplifier with I/V sense.
+  The device provides a PCM interface for audio data and a standard
+  I2C interface for control data communication.
+  The MAX98397 is a variant of MAX98396 with wide input supply range.
+
+properties:
+  compatible:
+    enum:
+      - adi,max98396
+      - adi,max98397
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  avdd-supply:
+    description: A 1.8V supply that powers up the AVDD pin.
+
+  dvdd-supply:
+    description: A 1.2V supply that powers up the DVDD pin.
+
+  dvddio-supply:
+    description: A 1.2V or 1.8V supply that powers up the VDDIO pin.
+
+  pvdd-supply:
+    description: A 3.0V to 20V supply that powers up the PVDD pin.
+
+  vbat-supply:
+    description: A 3.3V to 5.5V supply that powers up the VBAT pin.
+
+  adi,vmon-slot-no:
+    description: slot number of the voltage sense monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,imon-slot-no:
+    description: slot number of the current sense monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 1
+
+  adi,spkfb-slot-no:
+    description: slot number of speaker DSP monitor
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 2
+
+  adi,bypass-slot-no:
+    description:
+      Selects the PCM data input channel that is routed to the speaker
+      audio processing bypass path.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  adi,interleave-mode:
+    description:
+      For cases where a single combined channel for the I/V sense data
+      is not sufficient, the device can also be configured to share
+      a single data output channel on alternating frames.
+      In this configuration, the current and voltage data will be frame
+      interleaved on a single output channel.
+    type: boolean
+
+  adi,dmon-stuck-enable:
+    description:
+      Enables the "data monitor stuck" feature. Once the data monitor is
+      enabled, it actively monitors the selected input data (from DIN) to the
+      speaker amplifier. Once a data error is detected, the data monitor
+      automatically places the device into software shutdown.
+    type: boolean
+
+  adi,dmon-stuck-threshold-bits:
+    description:
+      Sets the threshold for the "data monitor stuck" feature, in bits.
+    enum: [9, 11, 13, 15]
+    default: 15
+
+  adi,dmon-magnitude-enable:
+    description:
+      Enables the "data monitor magnitude" feature. Once the data monitor is
+      enabled, it actively monitors the selected input data (from DIN) to the
+      speaker amplifier. Once a data error is detected, the data monitor
+      automatically places the device into software shutdown.
+    type: boolean
+
+  adi,dmon-magnitude-threshold-bits:
+    description:
+      Sets the threshold for the "data monitor magnitude" feature, in bits.
+    enum: [2, 3, 4, 5]
+    default: 5
+
+  adi,dmon-duration-ms:
+    description:
+      Sets the duration for the "data monitor" feature, in milliseconds.
+    enum: [64, 256, 1024, 4096]
+    default: 64
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        max98396: amplifier@39 {
+            compatible = "adi,max98396";
+            reg = <0x39>;
+            dvdd-supply = <&regulator_1v2>;
+            dvddio-supply = <&regulator_1v8>;
+            avdd-supply = <&regulator_1v8>;
+            pvdd-supply = <&regulator_pvdd>;
+            adi,vmon-slot-no = <0>;
+            adi,imon-slot-no = <1>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4375.yaml b/Documentation/devicetree/bindings/sound/ak4375.yaml
new file mode 100644
index 000000000000..5f0fc584bb38
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4375.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ak4375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AK4375 DAC and headphones amplifier
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+properties:
+  compatible:
+    const: asahi-kasei,ak4375
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  avdd-supply:
+    description: regulator phandle for the AVDD power supply.
+
+  tvdd-supply:
+    description: regulator phandle for the TVDD power supply.
+
+  pdn-gpios:
+    description: optional GPIO to set the PDN pin.
+
+required:
+  - compatible
+  - reg
+  - '#sound-dai-cells'
+  - avdd-supply
+  - tvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      headphones: audio-codec@10 {
+        compatible = "asahi-kasei,ak4375";
+        reg = <0x10>;
+        avdd-supply = <&reg_headphones_avdd>;
+        tvdd-supply = <&pm8916_l6>;
+        pdn-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&headphones_pdn_default>;
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/ak4613.yaml b/Documentation/devicetree/bindings/sound/ak4613.yaml
index ef4055ef0ccd..aa8a258a9f1c 100644
--- a/Documentation/devicetree/bindings/sound/ak4613.yaml
+++ b/Documentation/devicetree/bindings/sound/ak4613.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/ak4613.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: AK4613 I2C transmitter Device Tree Bindings
+title: AK4613 I2C transmitter
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml
index 1e2caa29790e..48a5b2c3934e 100644
--- a/Documentation/devicetree/bindings/sound/ak4642.yaml
+++ b/Documentation/devicetree/bindings/sound/ak4642.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/ak4642.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: AK4642 I2C transmitter Device Tree Bindings
+title: AK4642 I2C transmitter
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
index 559aff13ae23..292fcb643999 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-codec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Codec Device Tree Bindings
+title: Allwinner A10 Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index 7d48ea094c66..dd30881ad2f5 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-i2s.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 I2S Controller Device Tree Bindings
+title: Allwinner A10 I2S Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -31,6 +31,10 @@ properties:
           - const: allwinner,sun50i-a64-i2s
           - const: allwinner,sun8i-h3-i2s
       - const: allwinner,sun50i-h6-i2s
+      - const: allwinner,sun50i-r329-i2s
+      - items:
+          - const: allwinner,sun20i-d1-i2s
+          - const: allwinner,sun50i-r329-i2s
 
   reg:
     maxItems: 1
@@ -67,6 +71,7 @@ allOf:
               - allwinner,sun8i-h3-i2s
               - allwinner,sun50i-a64-codec-i2s
               - allwinner,sun50i-h6-i2s
+              - allwinner,sun50i-r329-i2s
 
     then:
       required:
@@ -84,7 +89,6 @@ allOf:
       properties:
         dmas:
           minItems: 1
-          maxItems: 2
           items:
             - description: RX DMA Channel
             - description: TX DMA Channel
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
index 444a432912bb..68c84e29ce57 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-spdif.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 S/PDIF Controller Device Tree Bindings
+title: Allwinner A10 S/PDIF Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
index 3b764415c9ab..5800de63fc84 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun50i-a64-codec-analog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 Analog Codec Device Tree Bindings
+title: Allwinner A64 Analog Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -21,6 +21,11 @@ properties:
     description:
       Regulator for the headphone amplifier
 
+  allwinner,internal-bias-resistor:
+    description:
+      Enable the internal 2.2K bias resistor between HBIAS and MICDET pins
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
new file mode 100644
index 000000000000..2f12cabe4c71
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/allwinner,sun50i-h6-dmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 DMIC
+
+maintainers:
+  - Ban Tao <fengzheng923@gmail.com>
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-dmic
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  dmas:
+    items:
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    dmic: dmic@5095000 {
+      #sound-dai-cells = <0>;
+      compatible = "allwinner,sun50i-h6-dmic";
+      reg = <0x05095000 0x400>;
+      interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu CLK_BUS_DMIC>, <&ccu CLK_DMIC>;
+      clock-names = "bus", "mod";
+      dmas = <&dma 7>;
+      dma-names = "rx";
+      resets = <&ccu RST_BUS_DMIC>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
index 26eca21e1f0f..1c21a1b390c7 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun8i-a23-codec-analog.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 Analog Codec Device Tree Bindings
+title: Allwinner A23 Analog Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
index 19f111f40225..4eb11a8e622b 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/allwinner,sun8i-a33-codec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A33 Codec Device Tree Bindings
+title: Allwinner A33 Codec
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
index f50558ed914f..0705f91199a0 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@@ -9,6 +9,9 @@ title: Amlogic AIU audio output controller
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller@.*"
@@ -65,6 +68,8 @@ properties:
   resets:
     maxItems: 1
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
index 3c3891d17238..77469a45bb7a 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@@ -9,6 +9,9 @@ title: Amlogic G12a Internal DAC Control Glue
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller@.*"
@@ -31,6 +34,8 @@ properties:
   resets:
     maxItems: 1
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index 2e35aeaa8781..5b8d59245f82 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -40,6 +40,7 @@ properties:
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object
+    additionalProperties: false
     description: |-
       dai-link child nodes:
         Container for dai-link level properties and the CODEC sub-nodes.
@@ -57,12 +58,13 @@ patternProperties:
           rate
 
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
         description: phandle of the CPU DAI
 
     patternProperties:
       "^codec-[0-9]+$":
         type: object
+        additionalProperties: false
         description: |-
           Codecs:
           dai-link representing backend links should have at least one subnode.
@@ -71,7 +73,7 @@ patternProperties:
 
         properties:
           sound-dai:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
+            maxItems: 1
             description: phandle of the codec DAI
 
         required:
@@ -112,4 +114,3 @@ examples:
                 };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
index db7b04da0b39..580a3d040abc 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@@ -9,6 +9,9 @@ title: Amlogic T9015 Internal Audio DAC
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^audio-controller@.*"
@@ -38,6 +41,8 @@ properties:
     description:
       Analogue power supply.
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/apple,mca.yaml b/Documentation/devicetree/bindings/sound/apple,mca.yaml
new file mode 100644
index 000000000000..d5dc92b5b654
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/apple,mca.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/apple,mca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple MCA I2S transceiver
+
+description: |
+  MCA is an I2S transceiver peripheral found on M1 and other Apple chips. It is
+  composed of a number of identical clusters which can operate independently
+  or in an interlinked fashion. Up to 6 clusters have been seen on an MCA.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-mca
+          - apple,t8103-mca
+      - const: apple,mca
+
+  reg:
+    items:
+      - description: Register region of the MCA clusters proper
+      - description: Register region of the DMA glue and its FIFOs
+
+  interrupts:
+    minItems: 4
+    maxItems: 6
+    description:
+      One interrupt per each cluster
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  dmas:
+    minItems: 16
+    maxItems: 24
+    description:
+      DMA channels corresponding to the SERDES units in the peripheral. They are
+      listed in groups of four per cluster, and within the group they are given
+      as associated to the TXA, RXA, TXB, RXB units.
+
+  dma-names:
+    minItems: 16
+    items:
+      - const: tx0a
+      - const: rx0a
+      - const: tx0b
+      - const: rx0b
+      - const: tx1a
+      - const: rx1a
+      - const: tx1b
+      - const: rx1b
+      - const: tx2a
+      - const: rx2a
+      - const: tx2b
+      - const: rx2b
+      - const: tx3a
+      - const: rx3a
+      - const: tx3b
+      - const: rx3b
+      - const: tx4a
+      - const: rx4a
+      - const: tx4b
+      - const: rx4b
+      - const: tx5a
+      - const: rx5a
+      - const: tx5b
+      - const: rx5b
+    description: |
+      Names for the DMA channels: 'tx'/'rx', then cluster number, then 'a'/'b'
+      based on the associated SERDES unit.
+
+  clocks:
+    minItems: 4
+    maxItems: 6
+    description:
+      Clusters' input reference clock.
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    minItems: 5
+    maxItems: 7
+    description:
+      First a general power domain for register access, then the power
+      domains of individual clusters for their operation.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - clocks
+  - power-domains
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    mca: i2s@9b600000 {
+      compatible = "apple,t6000-mca", "apple,mca";
+      reg = <0x9b600000 0x10000>,
+            <0x9b200000 0x20000>;
+
+      clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+      power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+                      <&ps_mca2>, <&ps_mca3>;
+      dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+             <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+             <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+             <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+      dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+                  "tx1a", "rx1a", "tx1b", "rx1b",
+                  "tx2a", "rx2a", "tx2b", "rx2b",
+                  "tx3a", "rx3a", "tx3b", "rx3b";
+
+      #sound-dai-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/arm,pl041.yaml b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
new file mode 100644
index 000000000000..7896b8150cf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/arm,pl041.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/arm,pl041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd. PrimeCell PL041 AACI sound interface
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm PrimeCell Advanced Audio CODEC Interface (AACI) is an AMBA compliant
+  peripheral that provides communication with an audio CODEC using the AC-link
+  protocol.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl041
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,pl041
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: APB register access clock
+
+  clock-names:
+    const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    audio-controller@40000 {
+        compatible = "arm,pl041", "arm,primecell";
+        reg = <0x040000 0x1000>;
+        interrupts = <11>;
+        clocks = <&v2m_clk24mhz>;
+        clock-names = "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/arndale.txt b/Documentation/devicetree/bindings/sound/arndale.txt
deleted file mode 100644
index 17530120ccfc..000000000000
--- a/Documentation/devicetree/bindings/sound/arndale.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Audio Binding for Arndale boards
-
-Required properties:
-- compatible : Can be one of the following:
-		"samsung,arndale-rt5631",
-		"samsung,arndale-wm1811"
-
-- samsung,audio-cpu: The phandle of the Samsung I2S controller
-- samsung,audio-codec: The phandle of the audio codec
-
-Optional:
-- samsung,model: The name of the sound-card
-
-Arndale Boards has many audio daughter cards, one of them is
-rt5631/alc5631. Below example shows audio bindings for rt5631/
-alc5631 based codec.
-
-Example:
-
-sound {
-		compatible = "samsung,arndale-rt5631";
-
-		samsung,audio-cpu = <&i2s0>
-		samsung,audio-codec = <&rt5631>;
-};
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
new file mode 100644
index 000000000000..43d04702ac2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-classd.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-classd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel ClassD Amplifier
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  The Audio Class D Amplifier (CLASSD) is a digital input, Pulse Width
+  Modulated (PWM) output stereo Class D amplifier.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-classd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: CLASSD
+    description: The user-visible name of this sound complex.
+
+  atmel,pwm-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - single
+      - diff
+    default: single
+    description: PWM modulation type.
+
+  atmel,non-overlap-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 5
+      - 10
+      - 15
+      - 20
+    default: 10
+    description:
+      Set non-overlapping time, the unit is nanosecond(ns).
+      Non-overlapping will be disabled if not specified.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    classd: sound@fc048000 {
+        compatible = "atmel,sama5d2-classd";
+        reg = <0xfc048000 0x100>;
+        interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+            | AT91_XDMAC_DT_PERID(47))>;
+        dma-names = "tx";
+        clocks = <&classd_clk>, <&classd_gclk>;
+        clock-names = "pclk", "gclk";
+        assigned-clocks = <&classd_gclk>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_classd_default>;
+        atmel,model = "classd @ SAMA5D2-Xplained";
+        atmel,pwm-type = "diff";
+        atmel,non-overlap-time = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
new file mode 100644
index 000000000000..0cd1ff89baed
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel I2S controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel I2S (Inter-IC Sound Controller) bus is the standard
+  interface for connecting audio devices, such as audio codecs.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral clock
+      - description: Generated clock (Optional)
+      - description: I2S mux clock (Optional). Set
+          with gclk when Master Mode is required.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+      - const: muxclk
+    minItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s@f8050000 {
+        compatible = "atmel,sama5d2-i2s";
+        reg = <0xf8050000 0x300>;
+        interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(31))>,
+               <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(32))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+        clock-names = "pclk", "gclk", "muxclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s0_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
new file mode 100644
index 000000000000..f320b561f24c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-pdmic.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-pdmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel PDMIC decoder
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  Atmel Pulse Density Modulation Interface Controller
+  (PDMIC) peripheral is a mono PDM decoder module
+  that decodes an incoming PDM sample stream.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-pdmic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: generated clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  atmel,mic-min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The minimal frequency that the microphone supports.
+
+  atmel,mic-max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximal frequency that the microphone supports.
+
+  atmel,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    default: PDMIC
+    description: The user-visible name of this sound card.
+
+  atmel,mic-offset:
+    $ref: /schemas/types.yaml#/definitions/int32
+    default: 0
+    description: The offset that should be added.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clock-names
+  - clocks
+  - atmel,mic-min-freq
+  - atmel,mic-max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pdmic: sound@f8018000 {
+        compatible = "atmel,sama5d2-pdmic";
+        reg = <0xf8018000 0x124>;
+        interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+                | AT91_XDMAC_DT_PERID(50))>;
+        dma-names = "rx";
+        clocks = <&pdmic_clk>, <&pdmic_gclk>;
+        clock-names = "pclk", "gclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_pdmic_default>;
+        atmel,model = "PDMIC@sama5d2_xplained";
+        atmel,mic-min-freq = <1000000>;
+        atmel,mic-max-freq = <3246000>;
+        atmel,mic-offset = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt
deleted file mode 100644
index 898551076382..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-classd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel ClassD driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-classd".
-- reg
-	Should contain ClassD registers location and length.
-- interrupts
-	Should contain the IRQ line for the ClassD.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
-	Must be "tx".
-- clock-names
-	Tuple listing input clock names.
-	Required elements: "pclk" and "gclk".
-- clocks
-	Please refer to clock-bindings.txt.
-- assigned-clocks
-	Should be <&classd_gclk>.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-- atmel,model
-	The user-visible name of this sound complex.
-	The default value is "CLASSD".
-- atmel,pwm-type
-	PWM modulation type, "single" or "diff".
-	The default value is "single".
-- atmel,non-overlap-time
-	Set non-overlapping time, the unit is nanosecond(ns).
-	There are four values,
-	<5>, <10>, <15>, <20>, the default value is <10>.
-	Non-overlapping will be disabled if not specified.
-
-Example:
-classd: classd@fc048000 {
-		compatible = "atmel,sama5d2-classd";
-		reg = <0xfc048000 0x100>;
-		interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(47))>;
-		dma-names = "tx";
-		clocks = <&classd_clk>, <&classd_gclk>;
-		clock-names = "pclk", "gclk";
-		assigned-clocks = <&classd_gclk>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_classd_default>;
-		atmel,model = "classd @ SAMA5D2-Xplained";
-		atmel,pwm-type = "diff";
-		atmel,non-overlap-time = <10>;
-};
diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
deleted file mode 100644
index 40549f496a81..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Atmel I2S controller
-
-Required properties:
-- compatible:     Should be "atmel,sama5d2-i2s".
-- reg:            Should be the physical base address of the controller and the
-                  length of memory mapped region.
-- interrupts:     Should contain the interrupt for the controller.
-- dmas:           Should be one per channel name listed in the dma-names property,
-                  as described in atmel-dma.txt and dma.txt files.
-- dma-names:      Two dmas have to be defined, "tx" and "rx".
-                  This IP also supports one shared channel for both rx and tx;
-                  if this mode is used, one "rx-tx" name must be used.
-- clocks:         Must contain an entry for each entry in clock-names.
-                  Please refer to clock-bindings.txt.
-- clock-names:    Should be one of each entry matching the clocks phandles list:
-                  - "pclk" (peripheral clock) Required.
-                  - "gclk" (generated clock) Optional (1).
-                  - "muxclk" (I2S mux clock) Optional (1).
-
-Optional properties:
-- pinctrl-0:      Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock and the I2S
-      mux clock are optional and should only be set together, when Master Mode
-      is required.
-
-Example:
-
-	i2s@f8050000 {
-		compatible = "atmel,sama5d2-i2s";
-		reg = <0xf8050000 0x300>;
-		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(31))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(32))>;
-		dma-names = "tx", "rx";
-		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
-		clock-names = "pclk", "gclk", "muxclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s0_default>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt b/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
deleted file mode 100644
index e0875f17c229..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-pdmic.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel PDMIC driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-pdmic".
-- reg
-	Should contain PDMIC registers location and length.
-- interrupts
-	Should contain the IRQ line for the PDMIC.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
-	Must be "rx".
-- clock-names
-	Required elements:
-	- "pclk"	peripheral clock
-	- "gclk"	generated clock
-- clocks
-	Must contain an entry for each required entry in clock-names.
-	Please refer to clock-bindings.txt.
-- atmel,mic-min-freq
-	The minimal frequency that the micphone supports.
-- atmel,mic-max-freq
-	The maximal frequency that the micphone supports.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-- atmel,model
-	The user-visible name of this sound card.
-	The default value is "PDMIC".
-- atmel,mic-offset
-	The offset that should be added.
-	The range is from -32768 to 32767.
-	The default value is 0.
-
-Example:
-	pdmic@f8018000 {
-				compatible = "atmel,sama5d2-pdmic";
-				reg = <0xf8018000 0x124>;
-				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
-				dmas = <&dma0
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-					| AT91_XDMAC_DT_PERID(50))>;
-				dma-names = "rx";
-				clocks = <&pdmic_clk>, <&pdmic_gclk>;
-				clock-names = "pclk", "gclk";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pdmic_default>;
-				atmel,model = "PDMIC @ sama5d2_xplained";
-				atmel,mic-min-freq = <1000000>;
-				atmel,mic-max-freq = <3246000>;
-				atmel,mic-offset = <0x0>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
index 0720857089a7..8facbce53db8 100644
--- a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -16,7 +16,7 @@ Board connectors:
  * Line In Jack
 
 wm8731 pins:
-cf Documentation/devicetree/bindings/sound/wm8731.txt
+cf Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
 
 Example:
 sound {
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
index 109e55f9e597..274092ef36c5 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Audio Graph Card Device Tree Bindings
+title: Audio Graph Card
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
index f7e94b1e0e4b..3de7b36829da 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/audio-graph-card2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Audio Graph Card2 Device Tree Bindings
+title: Audio Graph Card2
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
@@ -24,10 +24,13 @@ properties:
       connection's sink, the second being the connection's source.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
   multi:
+    type: object
     description: Multi-CPU/Codec node
   dpcm:
+    type: object
     description: DPCM node
   codec2codec:
+    type: object
     description: Codec to Codec node
 
 required:
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
index 43e7f86e3b23..64654ceef208 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml
@@ -19,14 +19,17 @@ properties:
     description: "device name prefix"
     $ref: /schemas/types.yaml#/definitions/string
   convert-rate:
-    description: CPU to Codec rate convert.
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
   convert-channels:
-    description: CPU to Codec rate channels.
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+  convert-sample-format:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+
 patternProperties:
   "^endpoint(@[0-9a-f]+)?":
     $ref: /schemas/graph.yaml#/$defs/endpoint-base
+    unevaluatedProperties: false
+
     properties:
       mclk-fs:
         description: |
@@ -42,10 +45,15 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/flag
       frame-master:
         description: Indicates dai-link frame master.
-        $ref: /schemas/types.yaml#/definitions/phandle
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
       bitclock-master:
         description: Indicates dai-link bit clock master
-        $ref: /schemas/types.yaml#/definitions/phandle
+        oneOf:
+          - $ref: /schemas/types.yaml#/definitions/flag
+          - $ref: /schemas/types.yaml#/definitions/phandle
+
       dai-format:
         description: audio format.
         items:
@@ -60,10 +68,36 @@ patternProperties:
             - msb
             - lsb
       convert-rate:
-        description: CPU to Codec rate convert.
-        $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
       convert-channels:
-        description: CPU to Codec rate channels.
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+      convert-sample-format:
+        $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+
+      dai-tdm-slot-num:
+        description: Number of slots in use.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      dai-tdm-slot-width:
+        description: Width in bits for each slot.
         $ref: /schemas/types.yaml#/definitions/uint32
+      dai-tdm-slot-width-map:
+        description: Mapping of sample widths to slot widths. For hardware
+          that cannot support a fixed slot width or a slot width always
+          equal to sample width. A matrix of one or more 3-tuples.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            -
+              description: Sample width in bits
+              minimum: 8
+              maximum: 64
+            -
+              description: Slot width in bits
+              minimum: 8
+              maximum: 256
+            -
+              description: Slot count
+              minimum: 1
+              maximum: 64
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/audio-graph.yaml b/Documentation/devicetree/bindings/sound/audio-graph.yaml
index 4b46794e5153..d59baedee180 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph.yaml
+++ b/Documentation/devicetree/bindings/sound/audio-graph.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/audio-graph.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Audio Graph Device Tree Bindings
+title: Audio Graph
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
@@ -27,11 +27,12 @@ properties:
     description: User specified audio sound widgets.
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
   convert-rate:
-    description: CPU to Codec rate convert.
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-rate"
   convert-channels:
-    description: CPU to Codec rate channels.
-    $ref: /schemas/types.yaml#/definitions/uint32
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-channels"
+  convert-sample-format:
+    $ref: "/schemas/sound/dai-params.yaml#/$defs/dai-sample-format"
+
   pa-gpios:
     maxItems: 1
   hp-det-gpio:
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml
new file mode 100644
index 000000000000..dce86dafe382
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/awinic,aw8738.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW8738 Audio Amplifier
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description:
+  The Awinic AW8738 is a simple audio amplifier with different operation modes
+  (set using one-wire pulse control). The mode configures the speaker-guard
+  function (primarily the power limit for the amplifier).
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: awinic,aw8738
+
+  mode-gpios:
+    description:
+      GPIO used for one-wire pulse control. The pin is typically called SHDN
+      (active-low), but this is misleading since it is actually more than
+      just a simple shutdown/enable control.
+    maxItems: 1
+
+  awinic,mode:
+    description: Operation mode (number of pulses for one-wire pulse control)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+
+  sound-name-prefix: true
+
+required:
+  - compatible
+  - mode-gpios
+  - awinic,mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    audio-amplifier {
+        compatible = "awinic,aw8738";
+        mode-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+        awinic,mode = <5>;
+        sound-name-prefix = "Speaker Amp";
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
index 3235702ce402..51d815d0c696 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
@@ -75,6 +75,19 @@ properties:
     maximum: 3
     default: 2
 
+  cirrus,boost-type:
+    description:
+      Configures the type of Boost being used.
+      Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and
+      boost-cap-microfarad.
+      External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
+      enable boost voltage.
+      0 = Internal Boost
+      1 = External Boost
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
   cirrus,gpio1-polarity-invert:
     description:
       Boolean which specifies whether the GPIO1
@@ -131,9 +144,32 @@ required:
   - compatible
   - reg
   - "#sound-dai-cells"
-  - cirrus,boost-peak-milliamp
-  - cirrus,boost-ind-nanohenry
-  - cirrus,boost-cap-microfarad
+
+allOf:
+  - if:
+      properties:
+        cirrus,boost-type:
+          const: 0
+    then:
+      required:
+        - cirrus,boost-peak-milliamp
+        - cirrus,boost-ind-nanohenry
+        - cirrus,boost-cap-microfarad
+    else:
+      if:
+        properties:
+          cirrus,boost-type:
+            const: 1
+      then:
+        required:
+          - cirrus,gpio1-output-enable
+          - cirrus,gpio1-src-select
+        properties:
+          cirrus,boost-peak-milliamp: false
+          cirrus,boost-ind-nanohenry: false
+          cirrus,boost-cap-microfarad: false
+          cirrus,gpio1-src-select:
+            enum: [1]
 
 additionalProperties: false
 
@@ -150,6 +186,8 @@ examples:
           VA-supply = <&dummy_vreg>;
           VP-supply = <&dummy_vreg>;
           reset-gpios = <&gpio 110 0>;
+
+          cirrus,boost-type = <0>;
           cirrus,boost-peak-milliamp = <4500>;
           cirrus,boost-ind-nanohenry = <1000>;
           cirrus,boost-cap-microfarad = <15>;
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
new file mode 100644
index 000000000000..184a1344ea76
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l45.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l45.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L45 Speaker Amplifier
+
+maintainers:
+  - Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
+  - Richard Fitzgerald <rf@opensource.cirrus.com>
+
+description: |
+  CS35L45 is a Boosted Mono Class D Amplifier with DSP
+  Speaker Protection and Adaptive Battery Management.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l45
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: voltage regulator phandle for the VDD_A supply
+
+  vdd-batt-supply:
+    description: voltage regulator phandle for the VDD_BATT supply
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  cirrus,asp-sdout-hiz-ctrl:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier. Logical OR of
+      CS35L45_ASP_TX_HIZ_xxx values.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs35l45.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l45: cs35l45@2 {
+          #sound-dai-cells = <1>;
+          compatible = "cirrus,cs35l45";
+          reg = <2>;
+          spi-max-frequency = <5000000>;
+          vdd-a-supply = <&dummy_vreg>;
+          vdd-batt-supply = <&dummy_vreg>;
+          reset-gpios = <&gpio 110 0>;
+          cirrus,asp-sdout-hiz-ctrl = <(CS35L45_ASP_TX_HIZ_UNUSED |
+                                        CS35L45_ASP_TX_HIZ_DISABLED)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
new file mode 100644
index 000000000000..7356084a2ca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l42.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS42L42 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description:
+  The CS42L42 is a low-power audio codec designed for portable applications.
+  It provides a high-dynamic range, stereo DAC for audio playback and a mono
+  high-dynamic-range ADC for audio capture. There is an integrated headset
+  detection block.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs42l42
+      - cirrus,cs42l83
+
+  reg:
+    description:
+      The I2C address of the CS42L42.
+    maxItems: 1
+
+  VP-supply:
+    description:
+      VP power supply.
+
+  VCP-supply:
+    description:
+      Charge pump power supply.
+
+  VD_FILT-supply:
+    description:
+      FILT+ power supply.
+
+  VL-supply:
+    description:
+      Logic power supply.
+
+  VA-supply:
+    description:
+      Analog power supply.
+
+  reset-gpios:
+    description:
+      This pin will be asserted and then deasserted to reset the
+      CS42L42 before communication starts.
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for CS42L42 IRQ line.
+    maxItems: 1
+
+  cirrus,ts-inv:
+    description: |
+      Sets the behaviour of the jack plug detect switch.
+
+      0 - (Default) Shorted to tip when unplugged, open when plugged.
+      This is "inverted tip sense (ITS)" in the datasheet.
+
+      1 - Open when unplugged, shorted to tip when plugged.
+      This is "normal tip sense (TS)" in the datasheet.
+
+      The CS42L42_TS_INV_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
+  cirrus,ts-dbnc-rise:
+    description: |
+      Debounce the rising edge of TIP_SENSE_PLUG. With no
+      debounce, the tip sense pin might be noisy on a plug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 7
+
+  cirrus,ts-dbnc-fall:
+    description: |
+      Debounce the falling edge of TIP_SENSE_UNPLUG. With no
+      debounce, the tip sense pin might be noisy on an unplug event.
+
+      0 - 0ms
+      1 - 125ms
+      2 - 250ms
+      3 - 500ms
+      4 - 750ms
+      5 - 1s (Default)
+      6 - 1.25s
+      7 - 1.5s
+
+      The CS42L42_TS_DBNCE_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 7
+
+  cirrus,btn-det-init-dbnce:
+    description: |
+      This sets how long to wait after enabling button detection
+      interrupts before servicing button interrupts, to allow the
+      HS bias time to settle. Value is in milliseconds.
+      There may be erroneous button interrupts if this debounce time
+      is too short.
+
+      0ms - 200ms,
+      Default = 100ms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 200
+
+  cirrus,btn-det-event-dbnce:
+    description: |
+      This sets how long to wait after receiving a button press
+      interrupt before processing it. Allows time for the button
+      press to make a clean connection with the bias resistors.
+      Value is in milliseconds.
+
+      0ms - 20ms,
+      Default = 10ms
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 20
+
+  cirrus,bias-lvls:
+    description: |
+      For a level-detect headset button scheme, each button will bias
+      the mic pin to a certain voltage. To determine which button was
+      pressed, the voltage is compared to sequential, decreasing
+      voltages, until the compared voltage < bias voltage.
+      For different hardware setups, a designer might want to tweak this.
+      This is an array of descending values for the comparator voltage,
+      given as percent of the HSBIAS voltage.
+
+      Array of 4 values, each 0-63
+      < x1 x2 x3 x4 >
+      Default = < 15 8 4 1 >
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 63
+
+  cirrus,hs-bias-ramp-rate:
+    description: |
+      If present this sets the rate that the HS bias should rise and fall.
+      The actual rise and fall times depend on external hardware (the
+      datasheet gives several rise and fall time examples).
+
+      0 - Fast rise time; slow, load-dependent fall time
+      1 - Fast
+      2 - Slow (default)
+      3 - Slowest
+
+      The CS42L42_HSBIAS_RAMP_* defines are available for this.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+
+  cirrus,hs-bias-sense-disable:
+    description: |
+      If present the HSBIAS sense is disabled. Configures HSBIAS output
+      current sense through the external 2.21-k resistor. HSBIAS_SENSE
+      is a hardware feature to reduce the potential pop noise when the
+      headset plug is removed slowly. But on some platforms ESD voltage
+      will affect it causing plug detection to fail, especially with CTIA
+      headset type. For different hardware setups, a designer might want
+      to tweak default behavior.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - VP-supply
+  - VCP-supply
+  - VD_FILT-supply
+  - VL-supply
+  - VA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/cs42l42.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l42: cs42l42@48 {
+          compatible = "cirrus,cs42l42";
+          reg = <0x48>;
+          VA-supply = <&dummy_vreg>;
+          VP-supply = <&dummy_vreg>;
+          VCP-supply = <&dummy_vreg>;
+          VD_FILT-supply = <&dummy_vreg>;
+          VL-supply = <&dummy_vreg>;
+
+          reset-gpios = <&axi_gpio_0 1 0>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <55 8>;
+
+          cirrus,ts-inv = <CS42L42_TS_INV_DIS>;
+          cirrus,ts-dbnc-rise = <CS42L42_TS_DBNCE_1000>;
+          cirrus,ts-dbnc-fall = <CS42L42_TS_DBNCE_0>;
+          cirrus,btn-det-init-dbnce = <100>;
+          cirrus,btn-det-event-dbnce = <10>;
+          cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
+          cirrus,hs-bias-ramp-rate = <CS42L42_HSBIAS_RAMP_SLOW>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/cs42l42.txt b/Documentation/devicetree/bindings/sound/cs42l42.txt
deleted file mode 100644
index 3b7705623980..000000000000
--- a/Documentation/devicetree/bindings/sound/cs42l42.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-CS42L42 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l42"
-
-  - reg : the I2C address of the device for I2C.
-
-  - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply :
-  power supplies for the device, as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-
-Optional properties:
-
-  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
-  deasserted before communication to the codec starts.
-
-  - interrupts : IRQ line info CS42L42.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for further information relating to interrupt properties)
-
-  - cirrus,ts-inv : Boolean property. Sets the behaviour of the jack plug
-  detect switch.
-
-  0 = (Default) Shorted to tip when unplugged, open when plugged.
-      This is "inverted tip sense (ITS)" in the datasheet.
-
-  1 = Open when unplugged, shorted to tip when plugged.
-      This is "normal tip sense (TS)" in the datasheet.
-
-  - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
-  debounce, the tip sense pin might be noisy on a plug event.
-
-  0 - 0ms,
-  1 - 125ms,
-  2 - 250ms,
-  3 - 500ms,
-  4 - 750ms,
-  5 - (Default) 1s,
-  6 - 1.25s,
-  7 - 1.5s,
-
-  - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG.
-  With no debounce, the tip sense pin might be noisy on an unplug event.
-
-  0 - 0ms,
-  1 - 125ms,
-  2 - 250ms,
-  3 - 500ms,
-  4 - 750ms,
-  5 - (Default) 1s,
-  6 - 1.25s,
-  7 - 1.5s,
-
-  - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after
-  enabling button detection interrupts. After auto-detection and before
-  servicing button interrupts, the HS bias needs time to settle. If you
-  don't wait, there is possibility for erroneous button interrupt.
-
-  0ms - 200ms,
-  Default = 100ms
-
-  - cirrus,btn-det-event-dbnce : This sets how long the driver delays after
-  receiving a button press interrupt. With level detect interrupts, you want
-  to wait a small amount of time to make sure the button press is making a
-  clean connection with the bias resistors.
-
-  0ms - 20ms,
-  Default = 10ms
-
-  - cirrus,bias-lvls : For a level-detect headset button scheme, each button
-  will bias the mic pin to a certain voltage. To determine which button was
-  pressed, the driver will compare this biased voltage to sequential,
-  decreasing voltages and will stop when a comparator is tripped,
-  indicating a comparator voltage < bias voltage. This value represents a
-  percentage of the internally generated HS bias voltage. For different
-  hardware setups, a designer might want to tweak this. This is an array of
-  descending values for the comparator voltage.
-
-  Array of 4 values
-  Each 0-63
-  < x1 x2 x3 x4 >
-  Default = < 15 8 4 1>
-
-  - cirrus,hs-bias-sense-disable: This is boolean property. If present the
-  HSBIAS sense is disabled. Configures HSBIAS output current sense through
-  the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce
-  the potential pop noise during the headset plug out slowly. But on some
-  platforms ESD voltage will affect it causing test to fail, especially
-  with CTIA headset type. For different hardware setups, a designer might
-  want to tweak default behavior.
-
-Example:
-
-cs42l42: cs42l42@48 {
-	compatible = "cirrus,cs42l42";
-	reg = <0x48>;
-	VA-supply = <&dummy_vreg>;
-	VP-supply = <&dummy_vreg>;
-	VCP-supply = <&dummy_vreg>;
-	VD_FILT-supply = <&dummy_vreg>;
-	VL-supply = <&dummy_vreg>;
-
-	reset-gpios = <&axi_gpio_0 1 0>;
-	interrupt-parent = <&gpio0>;
-	interrupts = <55 8>
-
-	cirrus,ts-inv = <0x00>;
-	cirrus,ts-dbnc-rise = <0x05>;
-	cirrus,ts-dbnc-fall = <0x00>;
-	cirrus,btn-det-init-dbnce = <100>;
-	cirrus,btn-det-event-dbnce = <10>;
-	cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
-	cirrus,hs-bias-ramp-rate = <0x02>;
-};
diff --git a/Documentation/devicetree/bindings/sound/da9055.txt b/Documentation/devicetree/bindings/sound/da9055.txt
index ed1b7cc6f249..75c6338b6ae2 100644
--- a/Documentation/devicetree/bindings/sound/da9055.txt
+++ b/Documentation/devicetree/bindings/sound/da9055.txt
@@ -2,7 +2,7 @@
 
 DA9055 provides Audio CODEC support (I2C only).
 
-The Audio CODEC device in DA9055 has it's own I2C address which is configurable,
+The Audio CODEC device in DA9055 has its own I2C address which is configurable,
 so the device is instantiated separately from the PMIC (MFD) device.
 
 For details on accompanying PMIC I2C device, see the following:
diff --git a/Documentation/devicetree/bindings/sound/dai-params.yaml b/Documentation/devicetree/bindings/sound/dai-params.yaml
new file mode 100644
index 000000000000..f5fb71f9b603
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/dai-params.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dai-params.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface (DAI) Stream Parameters
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+select: false
+
+$defs:
+
+  dai-channels:
+    description: Number of audio channels used by DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+
+  dai-sample-format:
+    description: Audio sample format used by DAI
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - s8
+      - s16_le
+      - s24_le
+      - s24_3le
+      - s32_le
+
+  dai-sample-rate:
+    description: Audio sample rate used by DAI
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8000
+    maximum: 192000
+
+properties: {}
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
deleted file mode 100644
index bd863bd69501..000000000000
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Texas Instruments McASP controller
-
-Required properties:
-- compatible :
-	"ti,dm646x-mcasp-audio"	: for DM646x platforms
-	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
-	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
-	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
-	"ti,omap4-mcasp-audio"	: for OMAP4
-
-- reg : Should contain reg specifiers for the entries in the reg-names property.
-- reg-names : Should contain:
-         * "mpu" for the main registers (required). For compatibility with
-           existing software, it is recommended this is the first entry.
-         * "dat" for separate data port register access (optional).
-- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF,
-  	    IEC60958-1, and AES-3 formats.
-- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted
-  	      or received over one serializer.
-- serial-dir : A list of serializer configuration. Each entry is a number
-               indication for serializer pin direction.
-               (0 - INACTIVE, 1 - TX, 2 - RX)
-- dmas: two element list of DMA controller phandles and DMA request line
-        ordered pairs.
-- dma-names: identifier string for each DMA request line in the dmas property.
-	     These strings correspond 1:1 with the ordered pairs in dmas. The dma
-	     identifiers must be "rx" and "tx".
-
-Optional properties:
-
-- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
-- tx-num-evt : FIFO levels.
-- rx-num-evt : FIFO levels.
-- dismod : Specify the drive on TX pin during inactive slots
-	0 : 3-state
-	2 : logic low
-	3 : logic high
-	Defaults to 'logic low' when the property is not present
-- sram-size-playback : size of sram to be allocated during playback
-- sram-size-capture  : size of sram to be allocated during capture
-- interrupts : Interrupt numbers for McASP
-- interrupt-names : Known interrupt names are "tx" and "rx"
-- pinctrl-0: Should specify pin control group used for this controller.
-- pinctrl-names: Should contain only one value - "default", for more details
-  		 please refer to pinctrl-bindings.txt
-- fck_parent : Should contain a valid clock name which will be used as parent
-	       for the McASP fck
-- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK
-		   and FS rate if applicable:
-		   AUCLK rate = auxclk-fs-ratio * FS rate
-
-Optional GPIO support:
-If any McASP pin need to be used as GPIO then the McASP node must have:
-...
-  gpio-controller
-  #gpio-cells = <2>;
-...
-
-When requesting a GPIO, the first parameter is the PIN index in McASP_P*
-registers.
-For example to request the AXR2 pin of mcasp8:
-function-gpios = <&mcasp8 2 0>;
-
-Or to request the ACLKR pin of mcasp8:
-function-gpios = <&mcasp8 29 0>;
-
-For generic gpio information, please refer to bindings/gpio/gpio.txt
-
-Example:
-
-mcasp0: mcasp0@1d00000 {
-	compatible = "ti,da830-mcasp-audio";
-	reg = <0x100000 0x3000>;
-	reg-names "mpu";
-	interrupts = <82>, <83>;
-	interrupt-names = "tx", "rx";
-	op-mode = <0>;		/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <
-			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 0 0
-			0 0 0 1
-			2 0 0 0 >;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
-};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
new file mode 100644
index 000000000000..f46c66bc6b2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: McASP Controller for TI SoCs
+
+maintainers:
+  - Jayesh Choudhary <j-choudhary@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,dm646x-mcasp-audio
+      - ti,da830-mcasp-audio
+      - ti,am33xx-mcasp-audio
+      - ti,dra7-mcasp-audio
+      - ti,omap4-mcasp-audio
+
+  reg:
+    minItems: 1
+    items:
+      - description: CFG registers
+      - description: data registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mpu
+      - const: dat
+
+  op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: 0 - I2S or 1 - DIT operation mode
+    enum:
+      - 0
+      - 1
+
+  tdm-slots:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      number of channels over one serializer
+      the property is ignored in DIT mode
+    minimum: 2
+    maximum: 32
+
+  serial-dir:
+    description:
+      A list of serializer configuration
+      Entry is indication for serializer pin direction
+      0 - Inactive, 1 - TX, 2 - RX
+      All AXR pins should be present in the array even if inactive
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 25
+    items:
+      minimum: 0
+      maximum: 2
+
+  dmas:
+    minItems: 1
+    items:
+      - description: transmission DMA channel
+      - description: reception DMA channel
+
+  dma-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
+
+  ti,hwmods:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Name of hwmod associated with McASP
+    maxItems: 1
+    deprecated: true
+
+  tx-num-evt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      configures WFIFO threshold
+      0 disables the FIFO use
+      if property is missing, then also FIFO use is disabled
+
+  rx-num-evt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      configures RFIFO threshold
+      0 disables the FIFO use
+      if property is missing, then also FIFO use is disabled
+
+  dismod:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      specify the drive on TX pin during inactive time slots
+      0 - 3-state, 2 - logic low, 3 - logic high
+    enum:
+      - 0
+      - 2
+      - 3
+    default: 2
+
+  interrupts:
+    anyOf:
+      - minItems: 1
+        items:
+          - description: TX interrupt
+          - description: RX interrupt
+      - items:
+          - description: common/combined interrupt
+
+  interrupt-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: tx
+          - const: rx
+      - const: common
+
+  fck_parent:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: parent clock name for McASP fck
+    maxItems: 1
+
+  auxclk-fs-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: ratio of AUCLK and FS rate if applicable
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  clocks:
+    minItems: 1
+    items:
+      - description: functional clock
+      - description: module specific optional ahclkx clock
+      - description: module specific optional ahclkr clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - const: ahclkx
+      - const: ahclkr
+
+  power-domains:
+    description: phandle to the corresponding power-domain
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  port:
+    description: connection for when McASP is used via graph card
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - dmas
+  - dma-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - if:
+      properties:
+        opmode:
+          enum:
+            - 0
+
+    then:
+      required:
+        - tdm-slots
+
+additionalProperties: false
+
+examples:
+  - |
+    mcasp0: mcasp0@1d00000 {
+      compatible = "ti,da830-mcasp-audio";
+      reg = <0x100000 0x3000>;
+      reg-names = "mpu";
+      interrupts = <82>, <83>;
+      interrupt-names = "tx", "rx";
+      op-mode = <0>;		/* MCASP_IIS_MODE */
+      tdm-slots = <2>;
+      dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+      dma-names = "tx", "rx";
+      serial-dir = <
+          0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+          0 0 0 0
+          0 0 0 1
+          2 0 0 0 >;
+      tx-num-evt = <1>;
+      rx-num-evt = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
deleted file mode 100644
index 6a536d570e29..000000000000
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-DesignWare I2S controller
-
-Required properties:
- - compatible : Must be "snps,designware-i2s"
- - reg : Must contain the I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's
-   clocks. The controller expects one clock: the clock used as the sampling
-   rate reference clock sample.
- - clock-names : "i2sclk" for the sample rate reference clock.
- - dmas: Pairs of phandle and specifier for the DMA channels that are used by
-   the core. The core expects one or two dma channels: one for transmit and
-   one for receive.
- - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
-
-Optional properties:
- - interrupts: The interrupt line number for the I2S controller. Add this
-   parameter if the I2S controller that you are using does not support DMA.
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
-properties please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-
-	soc_i2s: i2s@7ff90000 {
-		compatible = "snps,designware-i2s";
-		reg = <0x0 0x7ff90000 0x0 0x1000>;
-		clocks = <&scpi_i2sclk 0>;
-		clock-names = "i2sclk";
-		#sound-dai-cells = <0>;
-		dmas = <&dma0 5>;
-		dma-names = "tx";
-	};
diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
new file mode 100755
index 000000000000..07781408e788
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/everest,es8326.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Everest ES8326 audio CODEC
+
+maintainers:
+  - David Yang <yangxiaohua@everest-semi.com>
+
+properties:
+  compatible:
+    const: everest,es8326
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for master clock (MCLK)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+  everest,jack-pol:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      just the value of reg 57. Bit(3) decides whether the jack polarity is inverted.
+      Bit(2) decides whether the button on the headset is inverted.
+      Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto.
+    minimum: 0x00
+    maximum: 0x0f
+    default: 0x0f
+
+  everest,mic1-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      the value of reg 2A when headset plugged.
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x22
+
+  everest,mic2-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      the value of reg 2A when headset unplugged.
+    minimum: 0x00
+    maximum: 0x77
+    default: 0x44
+
+  everest,jack-detect-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Defined to invert the jack detection.
+
+  everest,interrupt-src:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      value of reg 0x58, Defines the interrupt source.
+      Bit(2) 1 means button press triggers irq, 0 means not.
+      Bit(3) 1 means PIN9 is the irq source for jack detection. When set to 0,
+      bias change on PIN9 do not triggers irq.
+      Bit(4) 1 means PIN27 is the irq source for jack detection.
+      Bit(5) 1 means PIN9 is the irq source after MIC detect.
+      Bit(6) 1 means PIN27 is the irq source after MIC detect.
+    minimum: 0
+    maximum: 0x3c
+    default: 0x08
+
+  everest,interrupt-clk:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+     value of reg 0x59, Defines the interrupt output behavior.
+     Bit(0-3) 0 means irq pulse equals 512*internal clock
+       1 means irq pulse equals 1024*internal clock
+       2 means ...
+       7 means irq pulse equals 65536*internal clock
+       8 means irq mutes PA
+       9 means irq mutes PA and DAC output
+     Bit(4) 1 means we invert the interrupt output.
+     Bit(6) 1 means the chip do not detect jack type after button released.
+       0 means the chip detect jack type again after button released.
+    minimum: 0
+    maximum: 0x7f
+    default: 0x45
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      es8326: codec@19 {
+        compatible = "everest,es8326";
+        reg = <0x19>;
+        clocks = <&clks 10>;
+        clock-names = "mclk";
+        #sound-dai-cells = <0>;
+        everest,mic1-src = [22];
+        everest,mic2-src = [44];
+        everest,jack-pol = [0e];
+        everest,interrupt-src = [08];
+        everest,interrupt-clk = [45];
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.txt b/Documentation/devicetree/bindings/sound/fsl,micfil.txt
deleted file mode 100644
index 53e227b15277..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl,micfil.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-NXP MICFIL Digital Audio Interface (MICFIL).
-
-The MICFIL digital interface provides a 16-bit audio signal from a PDM
-microphone bitstream in a configurable output sampling rate.
-
-Required properties:
-
-  - compatible		: Compatible list, contains "fsl,imx8mm-micfil"
-
-  - reg			: Offset and length of the register set for the device.
-
-  - interrupts		: Contains the micfil interrupts.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "ipg_clk" for register access and
-			  "ipg_clk_app" for internal micfil clock.
-
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-Example:
-micfil: micfil@30080000 {
-	compatible = "fsl,imx8mm-micfil";
-	reg = <0x0 0x30080000 0x0 0x10000>;
-	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clk IMX8MM_CLK_PDM_IPG>,
-		 <&clk IMX8MM_CLK_PDM_ROOT>;
-	clock-names = "ipg_clk", "ipg_clk_app";
-	dmas = <&sdma2 24 26 0x80000000>;
-};
diff --git a/Documentation/devicetree/bindings/sound/fsl,micfil.yaml b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
new file mode 100644
index 000000000000..64d57758ee67
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,micfil.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,micfil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MICFIL Digital Audio Interface (MICFIL)
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The MICFIL digital interface provides a 16-bit or 24-bit audio signal
+  from a PDM microphone bitstream in a configurable output sampling rate.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-micfil
+      - fsl,imx8mp-micfil
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Digital Microphone interface interrupt
+      - description: Digital Microphone interface error interrupt
+      - description: voice activity detector event interrupt
+      - description: voice activity detector error interrupt
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: rx
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: internal micfil clock
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+      - description: External clock 3
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: ipg_clk
+      - const: ipg_clk_app
+      - const: pll8k
+      - const: pll11k
+      - const: clkext3
+    minItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    micfil: audio-controller@30080000 {
+        compatible = "fsl,imx8mm-micfil";
+        reg = <0x30080000 0x10000>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+                 <&clk IMX8MM_CLK_PDM_ROOT>;
+        clock-names = "ipg_clk", "ipg_clk_app";
+        dmas = <&sdma2 24 25 0>;
+        dma-names = "rx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,mqs.txt b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
index 40353fc30255..d66284b8bef2 100644
--- a/Documentation/devicetree/bindings/sound/fsl,mqs.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,mqs.txt
@@ -2,7 +2,7 @@ fsl,mqs audio CODEC
 
 Required properties:
   - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs"
-		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs".
+		"fsl,imx8qm-mqs", "fsl,imx8qxp-mqs", "fsl,imx93-mqs".
   - clocks : A list of phandles + clock-specifiers, one for each entry in
 	     clock-names
   - clock-names : "mclk" - must required.
diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
new file mode 100644
index 000000000000..70c4111d59c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Synchronous Audio Interface (SAI).
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description: |
+  The SAI is based on I2S module that used communicating with audio codecs,
+  which provides a synchronous audio interface that supports fullduplex
+  serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+  codec/DSP interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-sai
+          - fsl,imx6sx-sai
+          - fsl,imx6ul-sai
+          - fsl,imx7ulp-sai
+          - fsl,imx8mq-sai
+          - fsl,imx8qm-sai
+          - fsl,imx8ulp-sai
+      - items:
+          - enum:
+              - fsl,imx8mm-sai
+              - fsl,imx8mn-sai
+              - fsl,imx8mp-sai
+          - const: fsl,imx8mq-sai
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: receive and transmit interrupt
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: The ipg clock for register access
+      - description: master clock source 0 (obsoleted)
+      - description: master clock source 1
+      - description: master clock source 2
+      - description: master clock source 3
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+    minItems: 4
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: bus
+          - const: mclk0
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+      - items:
+          - const: bus
+          - const: mclk1
+          - const: mclk2
+          - const: mclk3
+          - const: pll8k
+          - const: pll11k
+        minItems: 4
+
+  lsb-first:
+    description: |
+      Configures whether the LSB or the MSB is transmitted
+      first for the fifo data. If this property is absent,
+      the MSB is transmitted first as default, or the LSB
+      is transmitted first.
+    type: boolean
+
+  big-endian:
+    description: |
+      required if all the SAI registers are big-endian rather than little-endian.
+    type: boolean
+
+  fsl,sai-synchronous-rx:
+    description: |
+      SAI will work in the synchronous mode (sync Tx with Rx) which means
+      both the transmitter and the receiver will send and receive data by
+      following receiver's bit clocks and frame sync clocks.
+    type: boolean
+
+  fsl,sai-asynchronous:
+    description: |
+      SAI will work in the asynchronous mode, which means both transmitter
+      and receiver will send and receive data by following their own bit clocks
+      and frame sync clocks separately.
+      If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
+      default synchronous mode (sync Rx with Tx) will be used, which means both
+      transmitter and receiver will send and receive data by following clocks
+      of transmitter.
+    type: boolean
+
+  fsl,dataline:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Configure the dataline. It has 3 value for each configuration
+    maxItems: 16
+    items:
+      items:
+        - description: format Default(0), I2S(1) or PDM(2)
+          enum: [0, 1, 2]
+        - description: dataline mask for 'rx'
+        - description: dataline mask for 'tx'
+
+  fsl,sai-mclk-direction-output:
+    description: SAI will output the SAI MCLK clock.
+    type: boolean
+
+  fsl,shared-interrupt:
+    description: Interrupt is shared with other modules.
+    type: boolean
+
+  "#sound-dai-cells":
+    const: 0
+    description: optional, some dts node didn't add it.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-sai
+    then:
+      properties:
+        dmas:
+          items:
+            - description: DMA controller phandle and request line for TX
+            - description: DMA controller phandle and request line for RX
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+    else:
+      properties:
+        dmas:
+          items:
+            - description: DMA controller phandle and request line for RX
+            - description: DMA controller phandle and request line for TX
+        dma-names:
+          items:
+            - const: rx
+            - const: tx
+  - if:
+      required:
+        - fsl,sai-asynchronous
+    then:
+      properties:
+        fsl,sai-synchronous-rx: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+    sai2: sai@40031000 {
+        compatible = "fsl,vf610-sai";
+        reg = <0x40031000 0x1000>;
+        interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sai2_1>;
+        clocks = <&clks VF610_CLK_PLATFORM_BUS>,
+                 <&clks VF610_CLK_SAI2>,
+                 <&clks 0>, <&clks 0>;
+        clock-names = "bus", "mclk1", "mclk2", "mclk3";
+        dma-names = "tx", "rx";
+        dmas = <&edma0 0 21>,
+               <&edma0 0 20>;
+        big-endian;
+        lsb-first;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    sai1: sai@30010000 {
+        compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+        reg = <0x30010000 0x10000>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+                 <&clk IMX8MM_CLK_DUMMY>,
+                 <&clk IMX8MM_CLK_SAI1_ROOT>,
+                 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+        clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+        dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+        dma-names = "rx", "tx";
+        fsl,dataline = <1 0xff 0xff 2 0xff 0x11>;
+        #sound-dai-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
index f226ec13167a..1d64e8337aa4 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
@@ -58,6 +58,8 @@ properties:
           slave of the Shared Peripheral Bus and when two or more bus masters
           (CPU, DMA or DSP) try to access it. This property is optional depending
           on the SoC design.
+      - description: PLL clock source for 8kHz series rate, optional.
+      - description: PLL clock source for 11khz series rate, optional.
     minItems: 9
 
   clock-names:
@@ -72,6 +74,8 @@ properties:
       - const: rxtx6
       - const: rxtx7
       - const: spba
+      - const: pll8k
+      - const: pll11k
     minItems: 9
 
   big-endian:
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index 23d83fa7609f..8b4f4015cfe4 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -40,6 +40,8 @@ The compatible list for this generic sound card currently:
 
  "fsl,imx-audio-tlv320aic32x4"
 
+ "fsl,imx-audio-tlv320aic31xx"
+
  "fsl,imx-audio-si476x"
 
  "fsl,imx-audio-wm8958"
@@ -82,6 +84,7 @@ Optional properties:
   - dai-format		: audio format, for details see simple-card.yaml.
   - frame-inversion	: dai-link uses frame clock inversion, for details see simple-card.yaml.
   - bitclock-inversion	: dai-link uses bit clock inversion, for details see simple-card.yaml.
+  - mclk-id		: main clock id, specific for each card configuration.
 
 Optional unless SSI is selected as a CPU DAI:
 
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
deleted file mode 100644
index c71c5861d787..000000000000
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Freescale Synchronous Audio Interface (SAI).
-
-The SAI is based on I2S module that used communicating with audio codecs,
-which provides a synchronous audio interface that supports fullduplex
-serial interfaces with frame synchronization such as I2S, AC97, TDM, and
-codec/DSP interfaces.
-
-Required properties:
-
-  - compatible		: Compatible list, contains "fsl,vf610-sai",
-			  "fsl,imx6sx-sai", "fsl,imx6ul-sai",
-			  "fsl,imx7ulp-sai", "fsl,imx8mq-sai",
-			  "fsl,imx8qm-sai", "fsl,imx8mm-sai",
-			  "fsl,imx8mn-sai", "fsl,imx8mp-sai", or
-			  "fsl,imx8ulp-sai".
-
-  - reg			: Offset and length of the register set for the device.
-
-  - clocks		: Must contain an entry for each entry in clock-names.
-
-  - clock-names		: Must include the "bus" for register access and
-			  "mclk1", "mclk2", "mclk3" for bit clock and frame
-			  clock providing.
-  - dmas		: Generic dma devicetree binding as described in
-			  Documentation/devicetree/bindings/dma/dma.txt.
-
-  - dma-names		: Two dmas have to be defined, "tx" and "rx".
-
-  - pinctrl-names	: Must contain a "default" entry.
-
-  - pinctrl-NNN		: One property must exist for each entry in
-			  pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-
-  - lsb-first		: Configures whether the LSB or the MSB is transmitted
-			  first for the fifo data. If this property is absent,
-			  the MSB is transmitted first as default, or the LSB
-			  is transmitted first.
-
-  - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
-			  that SAI will work in the synchronous mode (sync Tx
-			  with Rx) which means both the transmitter and the
-			  receiver will send and receive data by following
-			  receiver's bit clocks and frame sync clocks.
-
-  - fsl,sai-asynchronous: This is a boolean property. If present, indicating
-			  that SAI will work in the asynchronous mode, which
-			  means both transmitter and receiver will send and
-			  receive data by following their own bit clocks and
-			  frame sync clocks separately.
-
-Optional properties:
-
-  - big-endian		: Boolean property, required if all the SAI
-			  registers are big-endian rather than little-endian.
-
-Optional properties (for mx6ul):
-
-  - fsl,sai-mclk-direction-output: This is a boolean property. If present,
-			 indicates that SAI will output the SAI MCLK clock.
-
-Note:
-- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
-  default synchronous mode (sync Rx with Tx) will be used, which means both
-  transmitter and receiver will send and receive data by following clocks
-  of transmitter.
-- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
-
-Example:
-sai2: sai@40031000 {
-	      compatible = "fsl,vf610-sai";
-	      reg = <0x40031000 0x1000>;
-	      pinctrl-names = "default";
-	      pinctrl-0 = <&pinctrl_sai2_1>;
-	      clocks = <&clks VF610_CLK_PLATFORM_BUS>,
-		     <&clks VF610_CLK_SAI2>,
-		     <&clks 0>, <&clks 0>;
-	      clock-names = "bus", "mclk1", "mclk2", "mclk3";
-	      dma-names = "tx", "rx";
-	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
-		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
-	      big-endian;
-	      lsb-first;
-};
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
index 77adbebed824..c3e9f3485449 100644
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -8,6 +8,7 @@ title: Audio codec controlled by ChromeOS EC
 
 maintainers:
   - Cheng-Yi Chiang <cychiang@chromium.org>
+  - Tzung-Bi Shih <tzungbi@google.com>
 
 description: |
   Google's ChromeOS EC codec is a digital mic codec provided by the
diff --git a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
index 837e3faa63a9..67ccddd44489 100644
--- a/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
+++ b/Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml
@@ -61,14 +61,20 @@ patternProperties:
       cpu:
         description: Holds subnode which indicates cpu dai.
         type: object
+        additionalProperties: false
+
         properties:
-          sound-dai: true
+          sound-dai:
+            maxItems: 1
 
       codec:
         description: Holds subnode which indicates codec dai.
         type: object
+        additionalProperties: false
+
         properties:
-          sound-dai: true
+          sound-dai:
+            maxItems: 1
 
     required:
       - link-name
diff --git a/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
new file mode 100644
index 000000000000..869b40363af8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/google,sc7280-herobrine.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,sc7280-herobrine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google SC7280-Herobrine ASoC sound card driver
+
+maintainers:
+  - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
+  - Judy Hsiao <judyhsiao@chromium.org>
+
+description:
+  This binding describes the SC7280 sound card which uses LPASS for audio.
+
+properties:
+  compatible:
+    enum:
+      - google,sc7280-herobrine
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description:
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^dai-link@[0-9a-f]$":
+    description:
+      Each subnode represents a dai link. Subnodes of each dai links would be
+      cpu/codec dais.
+
+    type: object
+
+    properties:
+      link-name:
+        description: Indicates dai-link name and PCM stream name.
+        $ref: /schemas/types.yaml#/definitions/string
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+        description: dai link address.
+
+      cpu:
+        description: Holds subnode which indicates cpu dai.
+        type: object
+        properties:
+          sound-dai: true
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+      codec:
+        description: Holds subnode which indicates codec dai.
+        type: object
+        properties:
+          sound-dai: true
+
+        required:
+          - sound-dai
+
+        additionalProperties: false
+
+    required:
+      - link-name
+      - cpu
+      - codec
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - model
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound {
+        compatible = "google,sc7280-herobrine";
+        model = "sc7280-wcd938x-max98360a-4dmic";
+
+        audio-routing =
+            "IN1_HPHL", "HPHL_OUT",
+            "IN2_HPHR", "HPHR_OUT",
+            "AMIC1", "MIC BIAS1",
+            "AMIC2", "MIC BIAS2",
+            "VA DMIC0", "MIC BIAS3",
+            "VA DMIC1", "MIC BIAS3",
+            "VA DMIC2", "MIC BIAS4",
+            "VA DMIC3", "MIC BIAS4",
+            "TX SWR_ADC0", "ADC1_OUTPUT",
+            "TX SWR_ADC1", "ADC2_OUTPUT",
+            "TX SWR_ADC2", "ADC3_OUTPUT",
+            "TX SWR_DMIC0", "DMIC1_OUTPUT",
+            "TX SWR_DMIC1", "DMIC2_OUTPUT",
+            "TX SWR_DMIC2", "DMIC3_OUTPUT",
+            "TX SWR_DMIC3", "DMIC4_OUTPUT";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dai-link@0 {
+            link-name = "WCD Playback";
+            reg = <LPASS_CDC_DMA_RX0>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+            };
+
+            codec {
+                sound-dai = <&wcd938x 0>, <&swr0 0>, <&rxmacro 0>;
+            };
+        };
+        dai-link@1 {
+            link-name = "WCD Capture";
+            reg = <LPASS_CDC_DMA_TX3>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+            };
+
+            codec {
+                sound-dai = <&wcd938x 1>, <&swr1 0>, <&txmacro 0>;
+            };
+        };
+
+        dai-link@2 {
+            link-name = "MI2S Playback";
+            reg = <MI2S_SECONDARY>;
+            cpu {
+                sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+            };
+
+            codec {
+                sound-dai = <&max98360a>;
+            };
+        };
+
+        dai-link@3 {
+            link-name = "DMIC Capture";
+            reg = <LPASS_CDC_DMA_VA_TX0>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+            };
+
+            codec {
+                sound-dai = <&vamacro 0>;
+            };
+        };
+
+        dai-link@5 {
+            link-name = "DP Playback";
+            reg = <LPASS_DP_RX>;
+            cpu {
+                sound-dai = <&lpass_cpu LPASS_DP_RX>;
+            };
+
+            codec {
+                sound-dai = <&mdss_dp>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
index d1816dd061cf..b6f5d486600e 100644
--- a/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
+++ b/Documentation/devicetree/bindings/sound/imx-audio-card.yaml
@@ -58,14 +58,19 @@ patternProperties:
       cpu:
         description: Holds subnode which indicates cpu dai.
         type: object
+        additionalProperties: false
         properties:
-          sound-dai: true
+          sound-dai:
+            maxItems: 1
 
       codec:
         description: Holds subnode which indicates codec dai.
         type: object
+        additionalProperties: false
         properties:
-          sound-dai: true
+          sound-dai:
+            minItems: 1
+            maxItems: 2
 
       fsl,mclk-equal-bclk:
         description: Indicates mclk can be equal to bclk, especially for sai interface
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
index d5474f83ac2c..e7e7bb65c366 100644
--- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
+++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
@@ -20,9 +20,11 @@ properties:
     description: User specified audio sound card name
 
   audio-cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: The phandle of an CPU DAI controller
 
   hdmi-out:
+    type: boolean
     description: |
       This is a boolean property. If present, the transmitting function
       of HDMI will be enabled, indicating there's a physical HDMI out
@@ -30,6 +32,7 @@ properties:
       block, such as an HDMI encoder or display-controller.
 
   hdmi-in:
+    type: boolean
     description: |
       This is a boolean property. If present, the receiving function of
       HDMI will be enabled, indicating there is a physical HDMI in
diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
index 803627e984f6..b2603f611af9 100644
--- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/sound/intel,keembay-i2s.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel KeemBay I2S Device Tree Bindings
+title: Intel KeemBay I2S
 
 maintainers:
   - Sia, Jee Heng <jee.heng.sia@intel.com>
diff --git a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
index e3a1f485f664..b97e0fcbdba3 100644
--- a/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
+++ b/Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/linux,bt-sco.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bluetooth SCO Audio Codec Device Tree Bindings
+title: Bluetooth SCO Audio Codec
 
 maintainers:
   - Mark Brown <broonie@kernel.org>
diff --git a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
index c6b070e1d014..808f6d2736c7 100644
--- a/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
+++ b/Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dummy SPDIF Transmitter Device Tree Bindings
+title: Dummy SPDIF Transmitter
 
 maintainers:
   - Mark Brown <broonie@kernel.org>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   compatible:
     const: linux,spdif-dit
@@ -16,6 +19,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - "#sound-dai-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
index fea9a1b6619a..deaa6886c42f 100644
--- a/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
+++ b/Documentation/devicetree/bindings/sound/maxim,max98390.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 1
     maximum: 8388607
 
+  reset-gpios:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -37,6 +40,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -45,5 +49,6 @@ examples:
         reg = <0x38>;
         maxim,temperature_calib = <1024>;
         maxim,r0_calib = <100232>;
+        reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
       };
     };
diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
index b6509cb2c8e0..3f88c7d61e34 100644
--- a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
+++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml
@@ -33,4 +33,3 @@ examples:
         reg = <0x38>;
       };
     };
-
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
index 4a2129005c0f..70a47c6823b1 100644
--- a/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/sound/mchp,spdifrx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip S/PDIF Rx Controller Device Tree Bindings
+title: Microchip S/PDIF Rx Controller
 
 maintainers:
   - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
 
 description:
-  The Microchip Sony/Philips Digital Interface Receiver is a serial port 
+  The Microchip Sony/Philips Digital Interface Receiver is a serial port
   compliant with the IEC-60958 standard.
 
 properties:
diff --git a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
index bdfb63387c53..d218e4ab9a7a 100644
--- a/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
+++ b/Documentation/devicetree/bindings/sound/mchp,spdiftx.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/sound/mchp,spdiftx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip S/PDIF Tx Controller Device Tree Bindings
+title: Microchip S/PDIF Tx Controller
 
 maintainers:
   - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
 
 description:
-  The Microchip Sony/Philips Digital Interface Transmitter is a serial port 
+  The Microchip Sony/Philips Digital Interface Transmitter is a serial port
   compliant with the IEC-60958 standard.
 
 properties:
diff --git a/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml b/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml
new file mode 100644
index 000000000000..04414eb4ada9
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/microchip,pdmc.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/microchip,pdmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Pulse Density Microphone Controller
+
+maintainers:
+  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+
+description:
+  The Microchip Pulse Density Microphone Controller (PDMC) interfaces up to 4
+  digital microphones having Pulse Density Modulated (PDM) outputs.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-pdmc
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+      - description: Generic Clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+
+  dmas:
+    description: RX DMA Channel
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  microchip,mic-pos:
+    description: |
+      Position of PDM microphones on the DS line and the sampling edge (rising
+      or falling) of the CLK line. A microphone is represented as a pair of DS
+      line and the sampling edge. The first microphone is mapped to channel 0,
+      the second to channel 1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: value for DS line
+        - description: value for sampling edge
+      anyOf:
+        - enum:
+            - [0, 0]
+            - [0, 1]
+            - [1, 0]
+            - [1, 1]
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - microchip,mic-pos
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/sound/microchip,pdmc.h>
+
+    pdmc: sound@e1608000 {
+        compatible = "microchip,sama7g5-pdmc";
+        reg = <0xe1608000 0x4000>;
+        #sound-dai-cells = <0>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+        dma-names = "rx";
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+        clock-names = "pclk", "gclk";
+        microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>,
+                            <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>,
+                            <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>,
+                            <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/mt6358.txt b/Documentation/devicetree/bindings/sound/mt6358.txt
index 59a73ffdf1d3..fbe9e55c68f5 100644
--- a/Documentation/devicetree/bindings/sound/mt6358.txt
+++ b/Documentation/devicetree/bindings/sound/mt6358.txt
@@ -7,7 +7,9 @@ Must be a child node of PMIC wrapper.
 
 Required properties:
 
-- compatible : "mediatek,mt6358-sound".
+- compatible - "string" - One of:
+    "mediatek,mt6358-sound"
+    "mediatek,mt6366-sound"
 - Avdd-supply : power source of AVDD
 
 Optional properties:
diff --git a/Documentation/devicetree/bindings/sound/mt6359.yaml b/Documentation/devicetree/bindings/sound/mt6359.yaml
index a54f466f769d..23d411fc4200 100644
--- a/Documentation/devicetree/bindings/sound/mt6359.yaml
+++ b/Documentation/devicetree/bindings/sound/mt6359.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/mt6359.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT6359 Codec Device Tree Bindings
+title: Mediatek MT6359 Codec
 
 maintainers:
   - Eason Yen <eason.yen@mediatek.com>
diff --git a/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
new file mode 100644
index 000000000000..88f82d096443
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8186
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8186-sound
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  mediatek,apmixedsys:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek apmixedsys controller
+
+  mediatek,infracfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek infracfg controller
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  clocks:
+    items:
+      - description: audio infra sys clock
+      - description: audio infra 26M clock
+      - description: audio top mux
+      - description: audio intbus mux
+      - description: mainpll 136.5M clock
+      - description: faud1 mux
+      - description: apll1 clock
+      - description: faud2 mux
+      - description: apll2 clock
+      - description: audio engen1 mux
+      - description: apll1_d8 22.5792M clock
+      - description: audio engen2 mux
+      - description: apll2_d8 24.576M clock
+      - description: i2s0 mclk mux
+      - description: i2s1 mclk mux
+      - description: i2s2 mclk mux
+      - description: i2s4 mclk mux
+      - description: tdm mclk mux
+      - description: i2s0_mck divider
+      - description: i2s1_mck divider
+      - description: i2s2_mck divider
+      - description: i2s4_mck divider
+      - description: tdm_mck divider
+      - description: audio hires mux
+      - description: 26M clock
+
+  clock-names:
+    items:
+      - const: aud_infra_clk
+      - const: mtkaif_26m_clk
+      - const: top_mux_audio
+      - const: top_mux_audio_int
+      - const: top_mainpll_d2_d4
+      - const: top_mux_aud_1
+      - const: top_apll1_ck
+      - const: top_mux_aud_2
+      - const: top_apll2_ck
+      - const: top_mux_aud_eng1
+      - const: top_apll1_d8
+      - const: top_mux_aud_eng2
+      - const: top_apll2_d8
+      - const: top_i2s0_m_sel
+      - const: top_i2s1_m_sel
+      - const: top_i2s2_m_sel
+      - const: top_i2s4_m_sel
+      - const: top_tdm_m_sel
+      - const: top_apll12_div0
+      - const: top_apll12_div1
+      - const: top_apll12_div2
+      - const: top_apll12_div4
+      - const: top_apll12_div_tdm
+      - const: top_mux_audio_h
+      - const: top_clk26m_clk
+
+required:
+  - compatible
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,apmixedsys
+  - mediatek,infracfg
+  - mediatek,topckgen
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    afe: mt8186-afe-pcm@11210000 {
+        compatible = "mediatek,mt8186-sound";
+        reg = <0x11210000 0x2000>;
+        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&watchdog 17>; //MT8186_TOPRGU_AUDIO_SW_RST
+        reset-names = "audiosys";
+        mediatek,apmixedsys = <&apmixedsys>;
+        mediatek,infracfg = <&infracfg>;
+        mediatek,topckgen = <&topckgen>;
+        clocks = <&infracfg_ao 44>, //CLK_INFRA_AO_AUDIO
+                 <&infracfg_ao 54>, //CLK_INFRA_AO_AUDIO_26M_BCLK
+                 <&topckgen 15>, //CLK_TOP_AUDIO
+                 <&topckgen 16>, //CLK_TOP_AUD_INTBUS
+                 <&topckgen 70>, //CLK_TOP_MAINPLL_D2_D4
+                 <&topckgen 17>, //CLK_TOP_AUD_1
+                 <&apmixedsys 12>, //CLK_APMIXED_APLL1
+                 <&topckgen 18>, //CLK_TOP_AUD_2
+                 <&apmixedsys 13>, //CLK_APMIXED_APLL2
+                 <&topckgen 19>, //CLK_TOP_AUD_ENGEN1
+                 <&topckgen 101>, //CLK_TOP_APLL1_D8
+                 <&topckgen 20>, //CLK_TOP_AUD_ENGEN2
+                 <&topckgen 104>, //CLK_TOP_APLL2_D8
+                 <&topckgen 63>, //CLK_TOP_APLL_I2S0_MCK_SEL
+                 <&topckgen 64>, //CLK_TOP_APLL_I2S1_MCK_SEL
+                 <&topckgen 65>, //CLK_TOP_APLL_I2S2_MCK_SEL
+                 <&topckgen 66>, //CLK_TOP_APLL_I2S4_MCK_SEL
+                 <&topckgen 67>, //CLK_TOP_APLL_TDMOUT_MCK_SEL
+                 <&topckgen 131>, //CLK_TOP_APLL12_CK_DIV0
+                 <&topckgen 132>, //CLK_TOP_APLL12_CK_DIV1
+                 <&topckgen 133>, //CLK_TOP_APLL12_CK_DIV2
+                 <&topckgen 134>, //CLK_TOP_APLL12_CK_DIV4
+                 <&topckgen 135>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_M
+                 <&topckgen 44>, //CLK_TOP_AUDIO_H
+                 <&clk26m>;
+        clock-names = "aud_infra_clk",
+                      "mtkaif_26m_clk",
+                      "top_mux_audio",
+                      "top_mux_audio_int",
+                      "top_mainpll_d2_d4",
+                      "top_mux_aud_1",
+                      "top_apll1_ck",
+                      "top_mux_aud_2",
+                      "top_apll2_ck",
+                      "top_mux_aud_eng1",
+                      "top_apll1_d8",
+                      "top_mux_aud_eng2",
+                      "top_apll2_d8",
+                      "top_i2s0_m_sel",
+                      "top_i2s1_m_sel",
+                      "top_i2s2_m_sel",
+                      "top_i2s4_m_sel",
+                      "top_tdm_m_sel",
+                      "top_apll12_div0",
+                      "top_apll12_div1",
+                      "top_apll12_div2",
+                      "top_apll12_div4",
+                      "top_apll12_div_tdm",
+                      "top_mux_audio_h",
+                      "top_clk26m_clk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
new file mode 100644
index 000000000000..d427f7f623db
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-mt6366-da7219-max98357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 with MT6366, DA7219 and MAX98357 ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+description:
+  This binding describes the MT8186 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-mt6366-da7219-max98357-sound
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8186 ASoC platform.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  playback-codecs:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        items:
+          - description: phandle of dp codec
+          - description: phandle of l channel speaker codec
+          - description: phandle of r channel speaker codec
+        minItems: 2
+    required:
+      - sound-dai
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - playback-codecs
+
+examples:
+  - |
+
+    sound: mt8186-sound {
+        compatible = "mediatek,mt8186-mt6366-da7219-max98357-sound";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&da7219>;
+        };
+
+        playback-codecs {
+            sound-dai = <&anx_bridge_dp>,
+                        <&max98357a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
new file mode 100644
index 000000000000..4fc5b045d3cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8186-mt6366-rt1019-rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 with MT6366, RT1019 and RT5682S ASoC sound card driver
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+
+description:
+  This binding describes the MT8186 sound card.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-mt6366-rt1019-rt5682s-sound
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8186 ASoC platform.
+
+  headset-codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        maxItems: 1
+    required:
+      - sound-dai
+
+  playback-codecs:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        items:
+          - description: phandle of dp codec
+          - description: phandle of l channel speaker codec
+          - description: phandle of r channel speaker codec
+        minItems: 2
+    required:
+      - sound-dai
+
+  mediatek,adsp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of MT8186 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+  - headset-codec
+  - playback-codecs
+
+examples:
+  - |
+
+    sound: mt8186-sound {
+        compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "aud_clk_mosi_off",
+                        "aud_clk_mosi_on";
+        pinctrl-0 = <&aud_clk_mosi_off>;
+        pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&rt5682s>;
+        };
+
+        playback-codecs {
+             sound-dai = <&it6505dptx>,
+                         <&rt1019p>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
index 5a5b765b859a..478be7e3fa29 100644
--- a/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8192-mt6359-rt1015-rt5682.yaml
@@ -18,6 +18,7 @@ properties:
     enum:
       - mediatek,mt8192_mt6359_rt1015_rt5682
       - mediatek,mt8192_mt6359_rt1015p_rt5682
+      - mediatek,mt8192_mt6359_rt1015p_rt5682s
 
   mediatek,platform:
     $ref: "/schemas/types.yaml#/definitions/phandle"
@@ -27,11 +28,37 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of HDMI codec.
 
+  headset-codec:
+    type: object
+    additionalProperties: false
+
+    properties:
+      sound-dai:
+        $ref: /schemas/types.yaml#/definitions/phandle
+    required:
+      - sound-dai
+
+  speaker-codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      sound-dai:
+        minItems: 1
+        maxItems: 2
+        items:
+          maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+    required:
+      - sound-dai
+
 additionalProperties: false
 
 required:
   - compatible
   - mediatek,platform
+  - headset-codec
+  - speaker-codecs
 
 examples:
   - |
@@ -44,6 +71,15 @@ examples:
                         "aud_clk_mosi_on";
         pinctrl-0 = <&aud_clk_mosi_off>;
         pinctrl-1 = <&aud_clk_mosi_on>;
+
+        headset-codec {
+            sound-dai = <&rt5682>;
+        };
+
+        speaker-codecs {
+            sound-dai = <&rt1015_l>,
+                        <&rt1015_r>;
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
index dcf790b053d2..4452a4070eff 100644
--- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
@@ -19,6 +19,18 @@ properties:
   interrupts:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Shared memory region for AFE memif.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
   mediatek,topckgen:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of the mediatek topckgen controller
@@ -121,10 +133,13 @@ required:
   - compatible
   - reg
   - interrupts
+  - resets
+  - reset-names
   - mediatek,topckgen
   - power-domains
   - clocks
   - clock-names
+  - memory-region
 
 additionalProperties: false
 
@@ -137,8 +152,11 @@ examples:
         compatible = "mediatek,mt8195-audio";
         reg = <0x10890000 0x10000>;
         interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+        resets = <&watchdog 14>;
+        reset-names = "audiosys";
         mediatek,topckgen = <&topckgen>;
         power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
+        memory-region = <&snd_dma_mem_reserved>;
         clocks = <&clk26m>,
                  <&topckgen 163>, //CLK_TOP_APLL1
                  <&topckgen 166>, //CLK_TOP_APLL2
diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
deleted file mode 100644
index d354c30d3377..000000000000
--- a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml
+++ /dev/null
@@ -1,47 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1011-rt5682.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek MT8195 with MT6359, RT1011 and RT5682 ASoC sound card driver
-
-maintainers:
-  - Trevor Wu <trevor.wu@mediatek.com>
-
-description:
-  This binding describes the MT8195 sound card with RT1011 and RT5682.
-
-properties:
-  compatible:
-    const: mediatek,mt8195_mt6359_rt1011_rt5682
-
-  mediatek,platform:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-    description: The phandle of MT8195 ASoC platform.
-
-  mediatek,dptx-codec:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-    description: The phandle of MT8195 Display Port Tx codec node.
-
-  mediatek,hdmi-codec:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-    description: The phandle of MT8195 HDMI codec node.
-
-additionalProperties: false
-
-required:
-  - compatible
-  - mediatek,platform
-
-examples:
-  - |
-
-    sound: mt8195-sound {
-        compatible = "mediatek,mt8195_mt6359_rt1011_rt5682";
-        mediatek,platform = <&afe>;
-        pinctrl-names = "default";
-        pinctrl-0 = <&aud_pins_default>;
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
index 20bc0ffd0e34..ad3447ff8b2c 100644
--- a/Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8195-mt6359.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1019-rt5682.yaml#
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT8195 with MT6359, RT1019 and RT5682 ASoC sound card driver
+title: MediaTek MT8195 ASoC sound card driver
 
 maintainers:
   - Trevor Wu <trevor.wu@mediatek.com>
@@ -14,7 +14,14 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195_mt6359_rt1019_rt5682
+    enum:
+      - mediatek,mt8195_mt6359_rt1019_rt5682
+      - mediatek,mt8195_mt6359_rt1011_rt5682
+      - mediatek,mt8195_mt6359_max98390_rt5682
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
 
   mediatek,platform:
     $ref: "/schemas/types.yaml#/definitions/phandle"
@@ -28,6 +35,16 @@ properties:
     $ref: "/schemas/types.yaml#/definitions/phandle"
     description: The phandle of MT8195 HDMI codec node.
 
+  mediatek,adsp:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ADSP platform.
+
+  mediatek,dai-link:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      A list of the desired dai-links in the sound card. Each entry is a
+      name defined in the machine driver.
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt
index 6c3baf7a5f21..7c84e7c7327a 100644
--- a/Documentation/devicetree/bindings/sound/nau8821.txt
+++ b/Documentation/devicetree/bindings/sound/nau8821.txt
@@ -34,7 +34,7 @@ Optional properties:
   - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
 
   - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock.
-
+  - nuvoton,key_enable: Headset button detection switch.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/nau8825.txt b/Documentation/devicetree/bindings/sound/nau8825.txt
index 388a7bc60b1f..cb861aca8d40 100644
--- a/Documentation/devicetree/bindings/sound/nau8825.txt
+++ b/Documentation/devicetree/bindings/sound/nau8825.txt
@@ -71,6 +71,9 @@ Optional properties:
 
   - nuvoton,crosstalk-enable: make crosstalk function enable if set.
 
+  - nuvoton,adcout-drive-strong: make the drive strength of ADCOUT IO PIN strong if set.
+      Otherwise, the drive keeps normal strength.
+
   - clocks: list of phandle and clock specifier pairs according to common clock bindings for the
       clocks described in clock-names
   - clock-names: should include "mclk" for the MCLK master clock
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
deleted file mode 100644
index 57f40f93453e..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-alc5632"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the ALC5632's pins as documented in the binding for the device
-  and:
-
-  * Headset Stereophone
-  * Int Spk
-  * Headset Mic
-  * Digital Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller
-- nvidia,audio-codec : The phandle of the ALC5632 audio codec
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-alc5632-paz00",
-				 "nvidia,tegra-audio-alc5632";
-
-	nvidia,model = "Compal PAZ00";
-
-	nvidia,audio-routing =
-				"Int Spk", "SPK_OUTP",
-				"Int Spk", "SPK_OUTN",
-				"Headset Mic","MICBIAS1",
-				"MIC1_N", "Headset Mic",
-				"MIC1_P", "Headset Mic",
-				"Headset Stereophone", "HP_OUT_R",
-				"Headset Stereophone", "HP_OUT_L";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&alc5632>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml
new file mode 100644
index 000000000000..7ef774910e5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-alc5632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with ALC5632 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-alc5632(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-alc5632
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headset Stereophone"
+        - "Int Spk"
+        - "Headset Mic"
+        - "Digital Mic"
+
+        # CODEC Pins
+        - SPKOUT
+        - SPKOUTN
+        - MICBIAS1
+        - MIC1
+        - HPR
+        - HPL
+        - DMICDAT
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-alc5632-paz00",
+                     "nvidia,tegra-audio-alc5632";
+
+        nvidia,model = "Compal PAZ00";
+
+        nvidia,audio-routing = "Int Spk", "SPKOUT",
+                               "Int Spk", "SPKOUTN",
+                               "Headset Mic", "MICBIAS1",
+                               "MIC1", "Headset Mic",
+                               "Headset Stereophone", "HPR",
+                               "Headset Stereophone", "HPL",
+                               "DMICDAT", "Digital Mic";
+
+        nvidia,i2s-controller = <&i2s>;
+        nvidia,audio-codec = <&codec>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
new file mode 100644
index 000000000000..82801b4f46dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-common.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/nvidia,tegra-audio-common.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Common properties for NVIDIA Tegra audio complexes
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  clocks:
+    items:
+      - description: PLL A clock
+      - description: PLL A OUT0 clock
+      - description: The Tegra cdev1/extern1 clock, which feeds the card's mclk
+
+  clock-names:
+    items:
+      - const: pll_a
+      - const: pll_a_out0
+      - const: mclk
+
+  nvidia,model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: The user-visible name of this sound complex.
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+
+  nvidia,ac97-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the AC97 controller
+
+  nvidia,i2s-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the Tegra I2S controller
+
+  nvidia,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of audio codec
+
+  nvidia,spkr-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the speakers
+
+  nvidia,hp-mute-gpios:
+    maxItems: 1
+    description: The GPIO that mutes the headphones
+
+  nvidia,hp-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect headphones are plugged in
+
+  nvidia,mic-det-gpios:
+    maxItems: 1
+    description: The GPIO that detect microphone is plugged in
+
+  nvidia,ear-sel-gpios:
+    maxItems: 1
+    description: The GPIO that switch between the microphones
+
+  nvidia,int-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the internal microphone
+
+  nvidia,ext-mic-en-gpios:
+    maxItems: 1
+    description: The GPIO that enables the external microphone
+
+  nvidia,headset:
+    type: boolean
+    description: The Mic Jack represents state of the headset microphone pin
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
index 5bdd30a8a404..b4bee466d67a 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-graph-card.yaml
@@ -44,6 +44,16 @@ properties:
     minItems: 1
     maxItems: 3
 
+  interconnects:
+    items:
+      - description: APE read memory client
+      - description: APE write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
   iommus:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
deleted file mode 100644
index c3495beba358..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-NVIDIA Tegra audio complex, with MAX98090 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-max98090"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the MAX98090's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphones
-  * Speakers
-  * Mic Jack
-  * Int Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
-- nvidia,mic-det-gpios : The GPIO that detect microphones are plugged in
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-max98090-venice2",
-		     "nvidia,tegra-audio-max98090";
-	nvidia,model = "NVIDIA Tegra Venice2";
-
-	nvidia,audio-routing =
-		"Headphones", "HPR",
-		"Headphones", "HPL",
-		"Speakers", "SPKR",
-		"Speakers", "SPKL",
-		"Mic Jack", "MICBIAS",
-		"IN34", "Mic Jack";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&acodec>;
-
-	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-		 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-		 <&tegra_car TEGRA124_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml
new file mode 100644
index 000000000000..ccc2ee77ca30
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-max98090.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with MAX98090 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-max98090(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-max98090
+      - items:
+          - enum:
+              - nvidia,tegra-audio-max98090-nyan-big
+              - nvidia,tegra-audio-max98090-nyan-blaze
+          - const: nvidia,tegra-audio-max98090-nyan
+          - const: nvidia,tegra-audio-max98090
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphones"
+        - "Speakers"
+        - "Mic Jack"
+        - "Int Mic"
+
+        # CODEC Pins
+        - MIC1
+        - MIC2
+        - DMICL
+        - DMICR
+        - IN1
+        - IN2
+        - IN3
+        - IN4
+        - IN5
+        - IN6
+        - IN12
+        - IN34
+        - IN56
+        - HPL
+        - HPR
+        - SPKL
+        - SPKR
+        - RCVL
+        - RCVR
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+
+    sound {
+        compatible = "nvidia,tegra-audio-max98090-venice2",
+                     "nvidia,tegra-audio-max98090";
+        nvidia,model = "NVIDIA Tegra Venice2";
+
+        nvidia,audio-routing =
+                "Headphones", "HPR",
+                "Headphones", "HPL",
+                "Speakers", "SPKR",
+                "Speakers", "SPKL",
+                "Mic Jack", "MICBIAS",
+                "IN34", "Mic Jack";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&acodec>;
+
+        clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+                 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+                 <&tegra_car TEGRA124_CLK_EXTERN1>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
deleted file mode 100644
index 7788808dcd0b..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-NVIDIA Tegra audio complex, with RT5640 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-rt5640"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the RT5640's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphones
-  * Speakers
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the RT5640 audio codec. This binding
-  assumes that AIF1 on the CODEC is connected to Tegra.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-rt5640-dalmore",
-			"nvidia,tegra-audio-rt5640";
-	nvidia,model = "NVIDIA Tegra Dalmore";
-
-	nvidia,audio-routing =
-		"Headphones", "HPOR",
-		"Headphones", "HPOL",
-		"Speakers", "SPORP",
-		"Speakers", "SPORN",
-		"Speakers", "SPOLP",
-		"Speakers", "SPOLN";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&rt5640>;
-
-	nvidia,hp-det-gpios = <&gpio 143 0>; /* GPIO PR7 */
-
-	clocks = <&tegra_car 216>, <&tegra_car 217>, <&tegra_car 120>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
new file mode 100644
index 000000000000..b1deaf271afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5639 or RT5640 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt56(39|40)(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5640
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphones"
+        - "Speakers"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - DMIC1
+        - DMIC2
+        - MICBIAS1
+        - IN1P
+        - IN1R
+        - IN2P
+        - IN2R
+        - HPOL
+        - HPOR
+        - LOUTL
+        - LOUTR
+        - MONOP
+        - MONON
+        - SPOLP
+        - SPOLN
+        - SPORP
+        - SPORN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5640-dalmore",
+                     "nvidia,tegra-audio-rt5640";
+        nvidia,model = "NVIDIA Tegra Dalmore";
+
+        nvidia,audio-routing =
+                "Headphones", "HPOR",
+                "Headphones", "HPOL",
+                "Speakers", "SPORP",
+                "Speakers", "SPORN",
+                "Speakers", "SPOLP",
+                "Speakers", "SPOLN";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5640>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>, <&clk 217>, <&clk 120>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt
deleted file mode 100644
index a4589cda214e..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-NVIDIA Tegra audio complex, with RT5677 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-rt5677"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the RT5677's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphone
-  * Speaker
-  * Headset Mic
-  * Internal Mic 1
-  * Internal Mic 2
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the RT5677 audio codec. This binding
-  assumes that AIF1 on the CODEC is connected to Tegra.
-
-Optional properties:
-- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
-- nvidia,hp-en-gpios : The GPIO that enables headphone amplifier
-- nvidia,mic-present-gpios: The GPIO that mic jack is plugged in
-- nvidia,dmic-clk-en-gpios : The GPIO that gates DMIC clock signal
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-rt5677-ryu",
-	        "nvidia,tegra-audio-rt5677";
-	nvidia,model = "NVIDIA Tegra Ryu";
-
-	nvidia,audio-routing =
-		"Headphone", "LOUT2",
-		"Headphone", "LOUT1",
-		"Headset Mic", "MICBIAS1",
-		"IN1P", "Headset Mic",
-		"IN1N", "Headset Mic",
-		"DMIC L1", "Internal Mic 1",
-		"DMIC R1", "Internal Mic 1",
-		"DMIC L2", "Internal Mic 2",
-		"DMIC R2", "Internal Mic 2",
-		"Speaker", "PDM1L",
-		"Speaker", "PDM1R";
-
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&rt5677>;
-
-	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-	nvidia,mic-present-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
-	nvidia,hp-en-gpios = <&rt5677 1 GPIO_ACTIVE_HIGH>;
-	nvidia,dmic-clk-en-gpios = <&rt5677 2 GPIO_ACTIVE_HIGH>;
-
-	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
-	         <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
-	         <&tegra_car TEGRA124_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml
new file mode 100644
index 000000000000..a49997d6028b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5677.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-rt5677.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with RT5677 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-rt5677(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-rt5677
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone"
+        - "Speaker"
+        - "Headset Mic"
+        - "Internal Mic 1"
+        - "Internal Mic 2"
+
+        # CODEC Pins
+        - IN1P
+        - IN1N
+        - IN2P
+        - IN2N
+        - MICBIAS1
+        - DMIC1
+        - DMIC2
+        - DMIC3
+        - DMIC4
+        - "DMIC L1"
+        - "DMIC L2"
+        - "DMIC L3"
+        - "DMIC L4"
+        - "DMIC R1"
+        - "DMIC R2"
+        - "DMIC R3"
+        - "DMIC R4"
+        - LOUT1
+        - LOUT2
+        - LOUT3
+        - PDM1L
+        - PDM1R
+        - PDM2L
+        - PDM2R
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-rt5677-ryu",
+                     "nvidia,tegra-audio-rt5677";
+        nvidia,model = "NVIDIA Tegra Ryu";
+
+        nvidia,audio-routing =
+                "Headphone", "LOUT2",
+                "Headphone", "LOUT1",
+                "Headset Mic", "MICBIAS1",
+                "IN1P", "Headset Mic",
+                "IN1N", "Headset Mic",
+                "DMIC L1", "Internal Mic 1",
+                "DMIC R1", "Internal Mic 1",
+                "DMIC L2", "Internal Mic 2",
+                "DMIC R2", "Internal Mic 2",
+                "Speaker", "PDM1L",
+                "Speaker", "PDM1R";
+
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&rt5677>;
+
+        nvidia,hp-det-gpios = <&gpio 143 0>;
+
+        clocks = <&clk 216>,
+                 <&clk 217>,
+                 <&clk 121>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt
deleted file mode 100644
index 5da7da4ea07a..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra audio complex, with SGTL5000 CODEC
-
-Required properties:
-- compatible : "nvidia,tegra-audio-sgtl5000"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the SGTL5000's pins (as documented in its binding), and the jacks
-  on the board:
-
-  * Headphone Jack
-  * Line In Jack
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
-  connected to the CODEC.
-- nvidia,audio-codec : The phandle of the SGTL5000 audio codec.
-
-Example:
-
-sound {
-	compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
-		     "nvidia,tegra-audio-sgtl5000";
-	nvidia,model = "Toradex Apalis T30";
-	nvidia,audio-routing =
-		"Headphone Jack", "HP_OUT",
-		"LINE_IN", "Line In Jack",
-		"MIC_IN", "Mic Jack";
-	nvidia,i2s-controller = <&tegra_i2s2>;
-	nvidia,audio-codec = <&sgtl5000>;
-	clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
-		 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
-		 <&tegra_car TEGRA30_CLK_EXTERN1>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
new file mode 100644
index 000000000000..943e7c01741c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-sgtl5000.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-sgtl5000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with SGTL5000 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-sgtl5000([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-sgtl5000
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Line In Jack"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - HP_OUT
+        - LINE_OUT
+        - LINE_IN
+        - MIC_IN
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra30-car.h>
+
+    sound {
+      compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+                   "nvidia,tegra-audio-sgtl5000";
+      nvidia,model = "Toradex Apalis T30 SGTL5000";
+      nvidia,audio-routing =
+              "Headphone Jack", "HP_OUT",
+              "LINE_IN", "Line In Jack",
+              "MIC_IN", "Mic Jack";
+      nvidia,i2s-controller = <&tegra_i2s2>;
+      nvidia,audio-codec = <&codec>;
+      clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+               <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+               <&tegra_car TEGRA30_CLK_EXTERN1>;
+      clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
deleted file mode 100644
index ef1fe7358279..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-NVIDIA Tegra audio complex for TrimSlice
-
-Required properties:
-- compatible : "nvidia,tegra-audio-trimslice"
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Must include the following entries:
-  "pll_a" (The Tegra clock of that name),
-  "pll_a_out0" (The Tegra clock of that name),
-  "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8903 audio codec
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-trimslice";
-	nvidia,i2s-controller = <&tegra_i2s1>;
-	nvidia,audio-codec = <&codec>;
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml
new file mode 100644
index 000000000000..8c87cd166238
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-trimslice.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with TrimSlice CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    const: nvidia,tegra-audio-trimslice
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-trimslice";
+        nvidia,i2s-controller = <&tegra_i2s1>;
+        nvidia,audio-codec = <&codec>;
+        clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
deleted file mode 100644
index 96f6a57dd6b4..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm8753"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM8753's pins as documented in the binding for the WM8753,
-  and the jacks on the board:
-
-  * Headphone Jack
-  * Mic Jack
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8753 audio codec
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm8753-whistler",
-		     "nvidia,tegra-audio-wm8753"
-	nvidia,model = "tegra-wm8753-harmony";
-
-	nvidia,audio-routing =
-		"Headphone Jack", "LOUT1",
-		"Headphone Jack", "ROUT1";
-
-	nvidia,i2s-controller = <&i2s1>;
-	nvidia,audio-codec = <&wm8753>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
-
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml
new file mode 100644
index 000000000000..a5b431d7d0c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8753.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8753 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm8753(-[a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm8753
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Mic Jack"
+
+        # CODEC Pins
+        - LOUT1
+        - LOUT2
+        - ROUT1
+        - ROUT2
+        - MONO1
+        - MONO2
+        - OUT3
+        - OUT4
+        - LINE1
+        - LINE2
+        - RXP
+        - RXN
+        - ACIN
+        - ACOP
+        - MIC1N
+        - MIC1
+        - MIC2N
+        - MIC2
+        - "Mic Bias"
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8753-whistler",
+                     "nvidia,tegra-audio-wm8753";
+        nvidia,model = "tegra-wm8753-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "LOUT1",
+                "Headphone Jack", "ROUT1";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8753>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
deleted file mode 100644
index bbd581a8c5bc..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm8903"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM8903's pins (documented in the WM8903 binding document),
-  and the jacks on the board:
-
-  * Headphone Jack
-  * Int Spk
-  * Mic Jack
-  * Int Mic
-
-- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
-- nvidia,audio-codec : The phandle of the WM8903 audio codec
-
-Optional properties:
-- nvidia,spkr-en-gpios : The GPIO that enables the speakers
-- nvidia,hp-mute-gpios : The GPIO that mutes the headphones
-- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
-- nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
-- nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
-- nvidia,headset : The Mic Jack represents state of the headset microphone pin
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm8903-harmony",
-		     "nvidia,tegra-audio-wm8903"
-	nvidia,model = "tegra-wm8903-harmony";
-
-	nvidia,audio-routing =
-		"Headphone Jack", "HPOUTR",
-		"Headphone Jack", "HPOUTL",
-		"Int Spk", "ROP",
-		"Int Spk", "RON",
-		"Int Spk", "LOP",
-		"Int Spk", "LON",
-		"Mic Jack", "MICBIAS",
-		"IN1L", "Mic Jack";
-
-	nvidia,i2s-controller = <&i2s1>;
-	nvidia,audio-codec = <&wm8903>;
-
-	nvidia,spkr-en-gpios = <&codec 2 0>;
-	nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
-	nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
-	nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
-
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml
new file mode 100644
index 000000000000..1b836acab980
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM8903 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - pattern: '^[a-z0-9]+,tegra-audio-wm8903(-[a-z0-9]+)+$'
+          - const: nvidia,tegra-audio-wm8903
+      - items:
+          - pattern: ad,tegra-audio-plutux
+          - const: nvidia,tegra-audio-wm8903
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone Jack"
+        - "Int Spk"
+        - "Mic Jack"
+        - "Int Mic"
+
+        # CODEC Pins
+        - IN1L
+        - IN1R
+        - IN2L
+        - IN2R
+        - IN3L
+        - IN3R
+        - DMICDAT
+        - HPOUTL
+        - HPOUTR
+        - LINEOUTL
+        - LINEOUTR
+        - LOP
+        - LON
+        - ROP
+        - RON
+        - MICBIAS
+
+required:
+  - nvidia,i2s-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm8903-harmony",
+                     "nvidia,tegra-audio-wm8903";
+        nvidia,model = "tegra-wm8903-harmony";
+
+        nvidia,audio-routing =
+                "Headphone Jack", "HPOUTR",
+                "Headphone Jack", "HPOUTL",
+                "Int Spk", "ROP",
+                "Int Spk", "RON",
+                "Int Spk", "LOP",
+                "Int Spk", "LON",
+                "Mic Jack", "MICBIAS",
+                "IN1L", "Mic Jack";
+
+        nvidia,i2s-controller = <&i2s1>;
+        nvidia,audio-codec = <&wm8903>;
+
+        nvidia,spkr-en-gpios = <&codec 2 0>;
+        nvidia,hp-det-gpios = <&gpio 178 0>;
+        nvidia,int-mic-en-gpios = <&gpio 184 0>;
+        nvidia,ext-mic-en-gpios = <&gpio 185 0>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
deleted file mode 100644
index 436f6cd9d07c..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-NVIDIA Tegra audio complex
-
-Required properties:
-- compatible : "nvidia,tegra-audio-wm9712"
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
-  - pll_a
-  - pll_a_out0
-  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
-- nvidia,model : The user-visible name of this sound complex.
-- nvidia,audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names for sources and
-  sinks are the WM9712's pins, and the jacks on the board:
-
-  WM9712 pins:
-
-  * MONOOUT
-  * HPOUTL
-  * HPOUTR
-  * LOUT2
-  * ROUT2
-  * OUT3
-  * LINEINL
-  * LINEINR
-  * PHONE
-  * PCBEEP
-  * MIC1
-  * MIC2
-  * Mic Bias
-
-  Board connectors:
-
-  * Headphone
-  * LineIn
-  * Mic
-
-- nvidia,ac97-controller : The phandle of the Tegra AC97 controller
-
-
-Example:
-
-sound {
-	compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
-		         "nvidia,tegra-audio-wm9712";
-	nvidia,model = "Toradex Colibri T20";
-
-	nvidia,audio-routing =
-		"Headphone", "HPOUTL",
-		"Headphone", "HPOUTR",
-		"LineIn", "LINEINL",
-		"LineIn", "LINEINR",
-		"Mic", "MIC1";
-
-	nvidia,ac97-controller = <&ac97>;
-
-	clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
-	clock-names = "pll_a", "pll_a_out0", "mclk";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml
new file mode 100644
index 000000000000..a1448283344b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra-audio-wm9712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra audio complex with WM9712 CODEC
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: nvidia,tegra-audio-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: '^[a-z0-9]+,tegra-audio-wm9712([-_][a-z0-9]+)+$'
+      - const: nvidia,tegra-audio-wm9712
+
+  nvidia,audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the connection's sink,
+      the second being the connection's source. Valid names for sources and
+      sinks are the pins (documented in the binding document),
+      and the jacks on the board.
+    minItems: 2
+    items:
+      enum:
+        # Board Connectors
+        - "Headphone"
+        - "LineIn"
+        - "Mic"
+
+        # CODEC Pins
+        - MONOOUT
+        - HPOUTL
+        - HPOUTR
+        - LOUT2
+        - ROUT2
+        - OUT3
+        - LINEINL
+        - LINEINR
+        - PHONE
+        - PCBEEP
+        - MIC1
+        - MIC2
+        - "Mic Bias"
+
+required:
+  - nvidia,ac97-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+                     "nvidia,tegra-audio-wm9712";
+        nvidia,model = "Toradex Colibri T20";
+
+        nvidia,audio-routing =
+                "Headphone", "HPOUTL",
+                "Headphone", "HPOUTR",
+                "LineIn", "LINEINL",
+                "LineIn", "LINEINR",
+                "Mic", "MIC1";
+
+        nvidia,ac97-controller = <&ac97>;
+
+        clocks = <&clk 112>, <&clk 113>, <&clk 93>;
+        clock-names = "pll_a", "pll_a_out0", "mclk";
+    };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
new file mode 100644
index 000000000000..d82415c21271
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-asrc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra186-asrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra186 ASRC
+
+description: |
+  Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
+  of the input signal from one frequency to another. It can handle over a
+  wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
+  ASRC has two modes of operation. One where ratio can be programmed in SW
+  and the other where it gets the information from ratio estimator module.
+
+  It supports  sample rate conversions in the range of 8 to 192 kHz and
+  supports 6 streams upto 12 total channels. The input data size can be
+  16, 24 and 32 bits.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^asrc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-asrc
+      - items:
+          - enum:
+              - nvidia,tegra234-asrc
+              - nvidia,tegra194-asrc
+          - const: nvidia,tegra186-asrc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ASRC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ASRC has seven input ports and six output ports. Accordingly ACIF
+      (Audio Client Interfaces) port nodes are defined to represent the
+      ASRC inputs (port 0 to 6) and outputs (port 7 to 12). These are
+      connected to corresponding ports on AHUB (Audio Hub). Additional
+      input (port 6) is for receiving ratio information from estimator.
+
+    patternProperties:
+      '^port@[0-6]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF input ports
+      '^port@[7-9]|1[1-2]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ASRC ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    asrc@2910000 {
+        compatible = "nvidia,tegra186-asrc";
+        reg = <0x2910000 0x2000>;
+        sound-name-prefix = "ASRC1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
index 0912d3e3fd8e..3d538df878ea 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra186-dspk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra186 DSPK Controller Device Tree Bindings
+title: Tegra186 DSPK Controller
 
 description: |
   The Digital Speaker Controller (DSPK) can be viewed as a Pulse
@@ -28,7 +28,9 @@ properties:
     oneOf:
       - const: nvidia,tegra186-dspk
       - items:
-          - const: nvidia,tegra194-dspk
+          - enum:
+              - nvidia,tegra234-dspk
+              - nvidia,tegra194-dspk
           - const: nvidia,tegra186-dspk
 
   reg:
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
deleted file mode 100644
index dc30c6bfbe95..000000000000
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-NVIDIA Tegra 20 I2S controller
-
-Required properties:
-- compatible : "nvidia,tegra20-i2s"
-- reg : Should contain I2S registers location and length
-- interrupts : Should contain I2S interrupt
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - i2s
-- dmas : Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names : Must include the following entries:
-  - rx
-  - tx
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-i2s@70002800 {
-	compatible = "nvidia,tegra20-i2s";
-	reg = <0x70002800 0x200>;
-	interrupts = < 45 >;
-	clocks = <&tegra_car 11>;
-	resets = <&tegra_car 11>;
-	reset-names = "i2s";
-	dmas = <&apbdma 21>, <&apbdma 21>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
new file mode 100644
index 000000000000..68ae124eaf80
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 I2S Controller
+
+description: |
+  The I2S Controller streams synchronous serial audio data between system
+  memory and an external audio device. The controller supports the I2S Left
+  Justified Mode, Right Justified Mode, and DSP mode formats.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-i2s
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2s
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+  - interrupts
+  - clocks
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    i2s@70002800 {
+        compatible = "nvidia,tegra20-i2s";
+        reg = <0x70002800 0x200>;
+        interrupts = <45>;
+        clocks = <&tegra_car 11>;
+        resets = <&tegra_car 11>;
+        reset-names = "i2s";
+        dmas = <&apbdma 21>, <&apbdma 21>;
+        dma-names = "rx", "tx";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
new file mode 100644
index 000000000000..60a368a132b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra20-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 S/PDIF Controller
+
+description: |
+  The S/PDIF controller supports both input and output in serial audio
+  digital interface format. The input controller can digitally recover
+  a clock from the received stream. The S/PDIF controller is also used
+  to generate the embedded audio for HDMI output channel.
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra20-spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: out
+      - const: in
+
+  dmas:
+    minItems: 2
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  "#sound-dai-cells":
+    const: 0
+
+  nvidia,fixed-parent-rate:
+    description: |
+      Specifies whether board prefers parent clock to stay at a fixed rate.
+      This allows multiple Tegra20 audio components work simultaneously by
+      limiting number of supportable audio rates.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - resets
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif@70002400 {
+        compatible = "nvidia,tegra20-spdif";
+        reg = <0x70002400 0x200>;
+        interrupts = <77>;
+        clocks = <&clk 99>, <&clk 98>;
+        clock-names = "out", "in";
+        resets = <&rst 10>;
+        dmas = <&apbdma 3>, <&apbdma 3>;
+        dma-names = "rx", "tx";
+        #sound-dai-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
index 19eaacc3f12a..15ab40aeab1e 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-admaif.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 ADMAIF Device Tree Bindings
+title: Tegra210 ADMAIF
 
 description: |
   ADMAIF is the interface between ADMA and AHUB. Each ADMA channel
@@ -27,7 +27,9 @@ properties:
           - nvidia,tegra210-admaif
           - nvidia,tegra186-admaif
       - items:
-          - const: nvidia,tegra194-admaif
+          - enum:
+              - nvidia,tegra234-admaif
+              - nvidia,tegra194-admaif
           - const: nvidia,tegra186-admaif
 
   reg:
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
index c4ba12ea3611..ea0dc0ece1bc 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 ADX Device Tree Bindings
+title: Tegra210 ADX
 
 description: |
   The Audio Demultiplexer (ADX) block takes an input stream with up to
@@ -30,6 +30,7 @@ properties:
       - const: nvidia,tegra210-adx
       - items:
           - enum:
+              - nvidia,tegra234-adx
               - nvidia,tegra194-adx
               - nvidia,tegra186-adx
           - const: nvidia,tegra210-adx
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
index df81d208184a..89f7805de274 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-ahub.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 AHUB Device Tree Bindings
+title: Tegra210 AHUB
 
 description: |
   The Audio Hub (AHUB) comprises a collection of hardware accelerators
@@ -26,6 +26,7 @@ properties:
       - enum:
           - nvidia,tegra210-ahub
           - nvidia,tegra186-ahub
+          - nvidia,tegra234-ahub
       - items:
           - const: nvidia,tegra194-ahub
           - const: nvidia,tegra186-ahub
@@ -105,6 +106,14 @@ patternProperties:
     type: object
     $ref: nvidia,tegra210-mixer.yaml#
 
+  '^asrc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra186-asrc.yaml#
+
+  '^processing-engine@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-ope.yaml#
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
index bb2111afe5a8..1aff61f072bb 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 AMX Device Tree Bindings
+title: Tegra210 AMX
 
 description: |
   The Audio Multiplexer (AMX) block can multiplex up to four input streams
@@ -31,6 +31,9 @@ properties:
           - const: nvidia,tegra186-amx
           - const: nvidia,tegra210-amx
       - const: nvidia,tegra194-amx
+      - items:
+          - const: nvidia,tegra234-amx
+          - const: nvidia,tegra194-amx
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
index 62db982bb01d..0f9d2b461e02 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-dmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 DMIC Controller Device Tree Bindings
+title: Tegra210 DMIC Controller
 
 description: |
   The Digital MIC (DMIC) Controller is used to interface with Pulse
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-dmic
       - items:
           - enum:
+              - nvidia,tegra234-dmic
               - nvidia,tegra194-dmic
               - nvidia,tegra186-dmic
           - const: nvidia,tegra210-dmic
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
index f954be636697..12cd17eede99 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-i2s.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 I2S Controller Device Tree Bindings
+title: Tegra210 I2S Controller
 
 description: |
   The Inter-IC Sound (I2S) controller implements full-duplex,
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-i2s
       - items:
           - enum:
+              - nvidia,tegra234-i2s
               - nvidia,tegra194-i2s
               - nvidia,tegra186-i2s
           - const: nvidia,tegra210-i2s
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
new file mode 100644
index 000000000000..5b9198602fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mbdrc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mbdrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MBDRC
+
+description:
+  The Multi Band Dynamic Range Compressor (MBDRC) is part of Output
+  Processing Engine (OPE) which interfaces with Audio Hub (AHUB) via
+  Audio Client Interface (ACIF). MBDRC can be used as a traditional
+  single full band or a dual band or a multi band dynamic processor.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mbdrc
+      - items:
+          - enum:
+              - nvidia,tegra234-mbdrc
+              - nvidia,tegra194-mbdrc
+              - nvidia,tegra186-mbdrc
+          - const: nvidia,tegra210-mbdrc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dynamic-range-compressor@702d8200 {
+        compatible = "nvidia,tegra210-mbdrc";
+        reg = <0x702d8200 0x200>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
index 428f3c851941..570b03282aeb 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 Mixer Device Tree Bindings
+title: Tegra210 Mixer
 
 description: |
   The Mixer supports mixing of up to ten 7.1 audio input streams and
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-amixer
       - items:
           - enum:
+              - nvidia,tegra234-amixer
               - nvidia,tegra194-amixer
               - nvidia,tegra186-amixer
           - const: nvidia,tegra210-amixer
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
index e2f5a8591d8f..4aecbc847b98 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 MVC Device Tree Bindings
+title: Tegra210 MVC
 
 description: |
   The Master Volume Control (MVC) provides gain or attenuation to a digital
@@ -31,6 +31,7 @@ properties:
       - const: nvidia,tegra210-mvc
       - items:
           - enum:
+              - nvidia,tegra234-mvc
               - nvidia,tegra194-mvc
               - nvidia,tegra186-mvc
           - const: nvidia,tegra210-mvc
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
new file mode 100644
index 000000000000..9dc9ba590fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-ope.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 OPE
+
+description:
+  The Output Processing Engine (OPE) is one of the AHUB client. It has
+  PEQ (Parametric Equalizer) and MBDRC (Multi Band Dynamic Range Compressor)
+  sub blocks for data processing.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-ope
+      - items:
+          - enum:
+              - nvidia,tegra234-ope
+              - nvidia,tegra194-ope
+              - nvidia,tegra186-ope
+          - const: nvidia,tegra210-ope
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  sound-name-prefix:
+    pattern: "^OPE[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description:
+          OPE ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+patternProperties:
+  '^equalizer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-peq.yaml#
+
+  '^dynamic-range-compressor@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mbdrc.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    processing-engine@702d8000 {
+        compatible = "nvidia,tegra210-ope";
+        reg = <0x702d8000 0x100>;
+        sound-name-prefix = "OPE1";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
new file mode 100644
index 000000000000..1e373c49d639
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-peq.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-peq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 PEQ
+
+description:
+  The Parametric Equalizer (PEQ) is a cascade of biquad filters with
+  each filter tuned based on certain parameters. It can be used to
+  equalize the irregularities in the speaker frequency response.
+  PEQ sits inside Output Processing Engine (OPE) which interfaces
+  with Audio Hub (AHUB) via Audio Client Interface (ACIF).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-peq
+      - items:
+          - enum:
+              - nvidia,tegra234-peq
+              - nvidia,tegra194-peq
+              - nvidia,tegra186-peq
+          - const: nvidia,tegra210-peq
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    equalizer@702d8100 {
+        compatible = "nvidia,tegra210-peq";
+        reg = <0x702d8100 0x100>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
index 41ad65173548..694f890d6305 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Tegra210 SFC Device Tree Bindings
+title: Tegra210 SFC
 
 description: |
   The Sampling Frequency Converter (SFC) converts the sampling frequency
@@ -28,6 +28,7 @@ properties:
       - const: nvidia,tegra210-sfc
       - items:
           - enum:
+              - nvidia,tegra234-sfc
               - nvidia,tegra194-sfc
               - nvidia,tegra186-sfc
           - const: nvidia,tegra210-sfc
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
index b55775e21de6..12c31b4b99e1 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml
@@ -23,6 +23,7 @@ properties:
       - const: nvidia,tegra30-hda
       - items:
           - enum:
+              - nvidia,tegra234-hda
               - nvidia,tegra194-hda
               - nvidia,tegra186-hda
               - nvidia,tegra210-hda
@@ -41,18 +42,22 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
     maxItems: 3
 
   clock-names:
+    minItems: 2
     items:
       - const: hda
       - const: hda2hdmi
       - const: hda2codec_2x
 
   resets:
+    minItems: 2
     maxItems: 3
 
   reset-names:
+    minItems: 2
     items:
       - const: hda
       - const: hda2hdmi
diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
index 7667471be1e4..7f2e68ff6d34 100644
--- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
+++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
@@ -15,6 +15,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - nxp,tfa9890
       - nxp,tfa9895
       - nxp,tfa9897
 
@@ -24,11 +25,23 @@ properties:
   '#sound-dai-cells':
     const: 0
 
+  rcv-gpios:
+    description: optional GPIO to be asserted when receiver mode is enabled.
+
   sound-name-prefix: true
 
   vddd-supply:
     description: regulator phandle for the VDDD power supply.
 
+if:
+  not:
+    properties:
+      compatible:
+        const: nxp,tfa9897
+then:
+  properties:
+    rcv-gpios: false
+
 required:
   - compatible
   - reg
@@ -55,3 +68,32 @@ examples:
         #sound-dai-cells = <0>;
       };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      speaker_codec_top: audio-codec@34 {
+        compatible = "nxp,tfa9897";
+        reg = <0x34>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 50 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_top_default>;
+        sound-name-prefix = "Speaker Top";
+        #sound-dai-cells = <0>;
+      };
+
+      speaker_codec_bottom: audio-codec@36 {
+        compatible = "nxp,tfa9897";
+        reg = <0x36>;
+        vddd-supply = <&pm8916_l6>;
+        rcv-gpios = <&msmgpio 111 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&speaker_bottom_default>;
+        sound-name-prefix = "Speaker Bottom";
+        #sound-dai-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
deleted file mode 100644
index 23998262a0a7..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-* Qualcomm Technologies APQ8016 SBC ASoC machine driver
-
-This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver
-
-Required properties:
-
-- compatible		: "qcom,apq8016-sbc-sndcard"
-
-- pinctrl-N		: One property must exist for each entry in
-			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
-			  for details of the property values.
-- pinctrl-names		: Must contain a "default" entry.
-- reg			: Must contain an address for each entry in reg-names.
-- reg-names		: A list which must include the following entries:
-				* "mic-iomux"
-				* "spkr-iomux"
-- qcom,model		: Name of the sound card.
-
-- qcom,audio-routing	: A list of the connections between audio components.
-			  Each entry is a pair of strings, the first being the
-			  connection's sink, the second being the connection's
-			  source. Valid names could be power supplies, MicBias
-			  of msm8x16_wcd codec and the jacks on the board:
-
-			  Power supplies:
-			  * MIC BIAS External1
-			  * MIC BIAS External2
-			  * MIC BIAS Internal1
-			  * MIC BIAS Internal2
-
-			  Board connectors:
-			  * Headset Mic
-			  * Secondary Mic
-			  * DMIC
-			  * Ext Spk
-
-Optional properties:
-
-- aux-devs		: A list of phandles for auxiliary devices (e.g. analog
-			  amplifiers) that do not appear directly within the DAI
-			  links. Should be connected to another audio component
-			  using "qcom,audio-routing".
-
-Dai-link subnode properties and subnodes:
-
-Required dai-link subnodes:
-
-- cpu					: CPU   sub-node
-- codec					: CODEC sub-node
-
-Required CPU/CODEC subnodes properties:
-
--link-name		: Name of the dai link.
--sound-dai		: phandle/s and port of CPU/CODEC
-
-Example:
-
-sound: sound {
-	compatible = "qcom,apq8016-sbc-sndcard";
-	reg = <0x07702000 0x4>, <0x07702004 0x4>;
-	reg-names = "mic-iomux", "spkr-iomux";
-	qcom,model = "DB410c";
-
-	qcom,audio-routing =
-		"MIC BIAS External1", "Handset Mic",
-		"MIC BIAS Internal2", "Headset Mic",
-		"MIC BIAS External1", "Secondary Mic",
-		"AMIC1", "MIC BIAS External1",
-		"AMIC2", "MIC BIAS Internal2",
-		"AMIC3", "MIC BIAS External1",
-		"DMIC1", "MIC BIAS Internal1",
-		"MIC BIAS Internal1", "Digital Mic1",
-		"DMIC2", "MIC BIAS Internal1",
-		"MIC BIAS Internal1", "Digital Mic2";
-
-	/* I2S - Internal codec */
-	internal-dai-link@0 {
-		cpu { /* PRIMARY */
-			sound-dai = <&lpass MI2S_PRIMARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-		};
-	};
-
-	/* External Primary or External Secondary -ADV7533 HDMI */
-	external-dai-link@0 {
-		link-name = "ADV7533";
-		cpu { /* QUAT */
-			sound-dai = <&lpass MI2S_QUATERNARY>;
-		};
-		codec {
-			sound-dai = <&adv_bridge 0>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
index 1e23c0e20bc1..ef18a572a1ff 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
@@ -22,40 +22,49 @@ properties:
       - qcom,lpass-cpu
       - qcom,apq8016-lpass-cpu
       - qcom,sc7180-lpass-cpu
+      - qcom,sc7280-lpass-cpu
 
   reg:
-    maxItems: 2
+    minItems: 1
+    maxItems: 6
     description: LPAIF core registers
 
   reg-names:
-    maxItems: 2
+    minItems: 1
+    maxItems: 6
 
   clocks:
     minItems: 3
-    maxItems: 6
+    maxItems: 7
 
   clock-names:
-    minItems: 3
-    maxItems: 6
+    minItems: 1
+    maxItems: 10
 
   interrupts:
-    maxItems: 2
+    minItems: 1
+    maxItems: 4
     description: LPAIF DMA buffer interrupt
 
   interrupt-names:
-    maxItems: 2
+    minItems: 1
+    maxItems: 4
 
   qcom,adsp:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Phandle for the audio DSP node
 
   iommus:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
     description: Phandle to apps_smmu node with sid mask
 
   power-domains:
     maxItems: 1
 
+  power-domain-names:
+    maxItems: 1
+
   '#sound-dai-cells':
     const: 1
 
@@ -69,7 +78,7 @@ patternProperties:
   "^dai-link@[0-9a-f]$":
     type: object
     description: |
-      LPASS CPU dai node for each I2S device. Bindings of each node
+      LPASS CPU dai node for each I2S device or Soundwire device. Bindings of each node
       depends on the specific driver providing the functionality and
       properties.
     properties:
@@ -174,6 +183,67 @@ allOf:
         - iommus
         - power-domains
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpass-cpu
+
+    then:
+      properties:
+        clock-names:
+          oneOf:
+            - items:   #for I2S
+                - const: aon_cc_audio_hm_h
+                - const: audio_cc_ext_mclk0
+                - const: core_cc_sysnoc_mport_core
+                - const: core_cc_ext_if0_ibit
+                - const: core_cc_ext_if1_ibit
+            - items:   #for Soundwire
+                - const: aon_cc_audio_hm_h
+                - const: audio_cc_codec_mem
+                - const: audio_cc_codec_mem0
+                - const: audio_cc_codec_mem1
+                - const: audio_cc_codec_mem2
+                - const: aon_cc_va_mem0
+            - items:   #for HDMI
+                - const: core_cc_sysnoc_mport_core
+
+        reg-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
+            - items:   #for I2S, soundwire and HDMI
+                - const: lpass-hdmiif
+                - const: lpass-lpaif
+                - const: lpass-rxtx-cdc-dma-lpm
+                - const: lpass-rxtx-lpaif
+                - const: lpass-va-lpaif
+                - const: lpass-va-cdc-dma-lpm
+        interrupt-names:
+          anyOf:
+            - items:   #for I2S
+                - const: lpass-irq-lpaif
+            - items:   #for I2S and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-hdmi
+            - items:   #for I2S, soundwire and HDMI
+                - const: lpass-irq-lpaif
+                - const: lpass-irq-hdmi
+                - const: lpass-irq-vaif
+                - const: lpass-irq-rxtxif
+        power-domain-names:
+          allOf:
+            - items:
+                - const: lcx
+
+      required:
+        - iommus
+        - power-domains
+
 examples:
   - |
     #include <dt-bindings/sound/sc7180-lpass.h>
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
index bc762b39c68a..1de11e7f33bb 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml
@@ -14,6 +14,8 @@ properties:
     enum:
       - qcom,sc7280-lpass-rx-macro
       - qcom,sm8250-lpass-rx-macro
+      - qcom,sm8450-lpass-rx-macro
+      - qcom,sc8280xp-lpass-rx-macro
 
   reg:
     maxItems: 1
@@ -28,17 +30,30 @@ properties:
     maxItems: 5
 
   clock-names:
-    items:
-      - const: mclk
-      - const: npl
-      - const: macro
-      - const: dcodec
-      - const: fsgen
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: npl
+          - const: macro
+          - const: dcodec
+          - const: fsgen
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+          - const: npl
+          - const: fsgen
 
   clock-output-names:
     items:
       - const: mclk
 
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
index 74f53864e7a7..de8297b358e8 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml
@@ -14,6 +14,8 @@ properties:
     enum:
       - qcom,sc7280-lpass-tx-macro
       - qcom,sm8250-lpass-tx-macro
+      - qcom,sm8450-lpass-tx-macro
+      - qcom,sc8280xp-lpass-tx-macro
 
   reg:
     maxItems: 1
@@ -28,17 +30,30 @@ properties:
     maxItems: 5
 
   clock-names:
-    items:
-      - const: mclk
-      - const: npl
-      - const: macro
-      - const: dcodec
-      - const: fsgen
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: npl
+          - const: macro
+          - const: dcodec
+          - const: fsgen
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
+          - const: npl
+          - const: fsgen
 
   clock-output-names:
     items:
       - const: mclk
 
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
   qcom,dmic-sample-rate:
     description: dmic sample rate
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
index 99f2c3687fbd..9f473c08cb2e 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
@@ -14,6 +14,8 @@ properties:
     enum:
       - qcom,sc7280-lpass-va-macro
       - qcom,sm8250-lpass-va-macro
+      - qcom,sm8450-lpass-va-macro
+      - qcom,sc8280xp-lpass-va-macro
 
   reg:
     maxItems: 1
@@ -28,15 +30,26 @@ properties:
     maxItems: 3
 
   clock-names:
-    items:
-      - const: mclk
-      - const: core
-      - const: dcodec
+    oneOf:
+      - items:   #for ADSP based platforms
+          - const: mclk
+          - const: core
+          - const: dcodec
+      - items:   #for ADSP bypass based platforms
+          - const: mclk
 
   clock-output-names:
     items:
       - const: fsgen
 
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: macro
+      - const: dcodec
+
   qcom,dmic-sample-rate:
     description: dmic sample rate
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
index 13cdb8a10687..4959ad658eac 100644
--- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
@@ -14,6 +14,8 @@ properties:
     enum:
       - qcom,sc7280-lpass-wsa-macro
       - qcom,sm8250-lpass-wsa-macro
+      - qcom,sm8450-lpass-wsa-macro
+      - qcom,sc8280xp-lpass-wsa-macro
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml
new file mode 100644
index 000000000000..d0f7a79e240a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6adm-routing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Device Manager (Q6ADM) routing
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Qualcomm Audio Device Manager (Q6ADM) routing node represents routing
+  specific configuration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6adm-routing
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@8 {
+            compatible = "qcom,q6adm";
+            reg = <APR_SVC_ADM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            routing {
+                compatible = "qcom,q6adm-routing";
+                #sound-dai-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
deleted file mode 100644
index 15c353a20de8..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Qualcomm Audio Device Manager (Q6ADM) binding
-
-Q6ADM is one of the APR audio service on Q6DSP.
-Please refer to qcom,apr.txt for details of the coommon apr service bindings
-used by the apr service device.
-
-- but must contain the following property:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6adm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
-		   Or "qcom,q6adm" where the version number can be queried
-		   from DSP.
-		   example "qcom,q6adm-v2.0"
-
-
-= ADM routing
-"routing" subnode of the ADM node represents adm routing specific configuration
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6adm-routing".
-
-- #sound-dai-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-= EXAMPLE
-apr-service@8 {
-	compatible = "qcom,q6adm";
-	reg = <APR_SVC_ADM>;
-	q6routing: routing {
-		compatible = "qcom,q6adm-routing";
-		#sound-dai-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
deleted file mode 100644
index bc6b5f1fe4f1..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Qualcomm Audio Front End (Q6AFE) binding
-
-AFE is one of the APR audio service on Q6DSP
-Please refer to qcom,apr.txt for details of the common apr service bindings
-used by all apr services. Must contain the following properties.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6afe-v<MAJOR-NUMBER>.<MINOR-NUMBER>"
-		  Or "qcom,q6afe" where the version number can be queried
-		  from DSP.
-		  example "qcom,q6afe"
-
-= EXAMPLE
-
-apr-service@4 {
-	compatible = "qcom,q6afe";
-	reg = <APR_SVC_AFE>;
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
index 5d972784321d..24f7bf2bfd95 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml
@@ -16,16 +16,12 @@ properties:
   compatible:
     const: qcom,q6apm-dais
 
-  reg:
-    maxItems: 1
-
   iommus:
     maxItems: 1
 
 required:
   - compatible
   - iommus
-  - reg
 
 additionalProperties: false
 
@@ -37,17 +33,14 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         qcom,domain = <GPR_DOMAIN_ID_ADSP>;
-        service@1 {
-          compatible = "qcom,q6apm";
-          reg = <1>;
 
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          apm-dai@1 {
-            compatible = "qcom,q6apm-dais";
-            iommus = <&apps_smmu 0x1801 0x0>;
+        service@1 {
+            compatible = "qcom,q6apm";
             reg = <1>;
-          };
+
+            dais {
+                compatible = "qcom,q6apm-dais";
+                iommus = <&apps_smmu 0x1801 0x0>;
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml
new file mode 100644
index 000000000000..8deb8ffb143b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,q6asm-dais.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Audio Stream Manager (Q6ASM)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+  Q6ASM is one of the APR audio services on Q6DSP. Each of its subnodes
+  represent a dai with board specific configuration.
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6asm-dais
+
+  iommus:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^dai@[0-9]+$":
+    type: object
+    description:
+      Q6ASM Digital Audio Interface
+
+    properties:
+      reg:
+        maxItems: 1
+
+      direction:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description: |
+          The direction of the dai stream::
+           - Q6ASM_DAI_TX_RX (0) for both tx and rx
+           - Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
+           - Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
+
+      is-compress-dai:
+        type: boolean
+        description:
+          Compress offload dai.
+
+    dependencies:
+      is-compress-dai: ["direction"]
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@7 {
+            compatible = "qcom,q6asm";
+            reg = <APR_SVC_ASM>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6asm-dais";
+                iommus = <&apps_smmu 0x1821 0x0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@0 {
+                    reg = <0>;
+                };
+
+                dai@1 {
+                    reg = <1>;
+                };
+
+                dai@2 {
+                    reg = <2>;
+                    is-compress-dai;
+                    direction = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
deleted file mode 100644
index 0d0075125243..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-Qualcomm Audio Stream Manager (Q6ASM) binding
-
-Q6ASM is one of the APR audio service on Q6DSP.
-Please refer to qcom,apr.txt for details of the common apr service bindings
-used by the apr service device.
-
-- but must contain the following property:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6asm-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
-		    Or "qcom,q6asm" where the version number can be queried
-		    from DSP.
-		    example "qcom,q6asm-v2.0"
-
-= ASM DAIs (Digital Audio Interface)
-"dais" subnode of the ASM node represents dai specific configuration
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6asm-dais".
-
-- #sound-dai-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-== ASM DAI is subnode of "dais" and represent a dai, it includes board specific
-configuration of each dai. Must contain the following properties.
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Must be dai id
-
-- direction:
-	Usage: Required for Compress offload dais
-	Value type: <u32>
-	Definition: Specifies the direction of the dai stream
-			Q6ASM_DAI_TX_RX (0) for both tx and rx
-			Q6ASM_DAI_TX (1) for only tx (Capture/Encode)
-			Q6ASM_DAI_RX (2) for only rx (Playback/Decode)
-
-- is-compress-dai:
-	Usage: Required for Compress offload dais
-	Value type: <boolean>
-	Definition: present for Compress offload dais
-
-
-= EXAMPLE
-#include <dt-bindings/sound/qcom,q6asm.h>
-
-apr-service@7 {
-	compatible = "qcom,q6asm";
-	reg = <APR_SVC_ASM>;
-	q6asmdai: dais {
-		compatible = "qcom,q6asm-dais";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#sound-dai-cells = <1>;
-
-		dai@0 {
-			reg = <0>;
-			direction = <Q6ASM_DAI_RX>;
-			is-compress-dai;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.txt b/Documentation/devicetree/bindings/sound/qcom,q6core.txt
deleted file mode 100644
index 5cd4cc9b1fde..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,q6core.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Qualcomm ADSP Core service binding
-
-Q6CORE is one of the APR audio service on Q6DSP.
-Please refer to qcom,apr.txt for details of the common apr service bindings
-used by the apr service device.
-
-- but must contain the following property:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6core-v<MAJOR-NUMBER>.<MINOR-NUMBER>".
-		   Or "qcom,q6core" where the version number can be queried
-		   from DSP.
-		   example "qcom,q6core-v2.0"
-
-= EXAMPLE
-apr-service@3 {
-	compatible = "qcom,q6core";
-	reg = <APR_SVC_ADSP_CORE>;
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
index f83f00737a2f..fd567d20417d 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml
@@ -18,9 +18,6 @@ properties:
       - qcom,q6afe-clocks
       - qcom,q6prm-lpass-clocks
 
-  reg:
-    maxItems: 1
-
   '#clock-cells':
     const: 2
     description:
@@ -32,7 +29,6 @@ properties:
 
 required:
   - compatible
-  - reg
   - "#clock-cells"
 
 additionalProperties: false
@@ -42,19 +38,22 @@ examples:
     #include <dt-bindings/soc/qcom,apr.h>
     #include <dt-bindings/sound/qcom,q6afe.h>
     apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
         #address-cells = <1>;
         #size-cells = <0>;
-        apr-service@4 {
+
+        service@4 {
+            compatible = "qcom,q6afe";
             reg = <APR_SVC_AFE>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-            clock-controller@2 {
-              compatible = "qcom,q6afe-clocks";
-              reg = <2>;
-              #clock-cells = <2>;
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            clock-controller {
+                compatible = "qcom,q6afe-clocks";
+                #clock-cells = <2>;
             };
         };
-      };
+    };
 
   - |
     #include <dt-bindings/soc/qcom,gpr.h>
@@ -63,15 +62,14 @@ examples:
         qcom,domain = <GPR_DOMAIN_ID_ADSP>;
         #address-cells = <1>;
         #size-cells = <0>;
+
         service@2 {
             reg = <GPR_PRM_MODULE_IID>;
             compatible = "qcom,q6prm";
-            #address-cells = <1>;
-            #size-cells = <0>;
-            clock-controller@2 {
-              compatible = "qcom,q6prm-lpass-clocks";
-              reg = <2>;
-              #clock-cells = <2>;
+
+            clock-controller {
+                compatible = "qcom,q6prm-lpass-clocks";
+                #clock-cells = <2>;
             };
         };
-      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
index dc7fba7b92d5..e53fc0960a14 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -18,9 +18,6 @@ properties:
       - qcom,q6afe-dais
       - qcom,q6apm-lpass-dais
 
-  reg:
-    maxItems: 1
-
   '#sound-dai-cells':
     const: 1
 
@@ -145,7 +142,6 @@ patternProperties:
 
 required:
   - compatible
-  - reg
   - "#sound-dai-cells"
   - "#address-cells"
   - "#size-cells"
@@ -157,26 +153,29 @@ examples:
     #include <dt-bindings/soc/qcom,apr.h>
     #include <dt-bindings/sound/qcom,q6afe.h>
     apr {
+        compatible = "qcom,apr-v2";
         #address-cells = <1>;
         #size-cells = <0>;
-        apr-service@4 {
+        qcom,domain = <APR_DOMAIN_ADSP>;
+
+        service@4 {
+            compatible = "qcom,q6afe";
             reg = <APR_SVC_AFE>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-            q6afedai@1 {
-              compatible = "qcom,q6afe-dais";
-              reg = <1>;
-              #address-cells = <1>;
-              #size-cells = <0>;
-              #sound-dai-cells = <1>;
-
-              dai@22 {
-                reg = <QUATERNARY_MI2S_RX>;
-                qcom,sd-lines = <0 1 2 3>;
-              };
+            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+            dais {
+                compatible = "qcom,q6afe-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@22 {
+                    reg = <QUATERNARY_MI2S_RX>;
+                    qcom,sd-lines = <0 1 2 3>;
+                };
             };
         };
-      };
+    };
   - |
     #include <dt-bindings/soc/qcom,gpr.h>
     gpr {
@@ -184,22 +183,21 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+
         service@1 {
             compatible = "qcom,q6apm";
             reg = <GPR_APM_MODULE_IID>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-            q6apmdai@1 {
-              compatible = "qcom,q6apm-lpass-dais";
-              reg = <1>;
-              #address-cells = <1>;
-              #size-cells = <0>;
-              #sound-dai-cells = <1>;
-
-              dai@22 {
-                reg = <QUATERNARY_MI2S_RX>;
-                qcom,sd-lines = <0 1 2 3>;
-              };
+
+            dais {
+                compatible = "qcom,q6apm-lpass-dais";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                #sound-dai-cells = <1>;
+
+                dai@22 {
+                    reg = <QUATERNARY_MI2S_RX>;
+                    qcom,sd-lines = <0 1 2 3>;
+                };
             };
         };
-      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
deleted file mode 100644
index de4c604641da..000000000000
--- a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* Qualcomm Technologies Inc. SDM845 ASoC sound card driver
-
-This binding describes the SDM845 sound card, which uses qdsp for audio.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be one of this
-			"qcom,sdm845-sndcard"
-			"qcom,db845c-sndcard"
-			"lenovo,yoga-c630-sndcard"
-
-- audio-routing:
-	Usage: Optional
-	Value type: <stringlist>
-	Definition:  A list of the connections between audio components.
-		  Each entry is a pair of strings, the first being the
-		  connection's sink, the second being the connection's
-		  source. Valid names could be power supplies, MicBias
-		  of codec and the jacks on the board.
-
-- model:
-	Usage: required
-	Value type: <stringlist>
-	Definition: The user-visible name of this sound card.
-
-- aux-devs
-	Usage: optional
-	Value type: <array of phandles>
-	Definition: A list of phandles for auxiliary devices (e.g. analog
-		    amplifiers) that do not appear directly within the DAI
-		    links. Should be connected to another audio component
-		    using "audio-routing".
-
-= dailinks
-Each subnode of sndcard represents either a dailink, and subnodes of each
-dailinks would be cpu/codec/platform dais.
-
-- link-name:
-	Usage: required
-	Value type: <string>
-	Definition: User friendly name for dai link
-
-= CPU, PLATFORM, CODEC dais subnodes
-- cpu:
-	Usage: required
-	Value type: <subnode>
-	Definition: cpu dai sub-node
-
-- codec:
-	Usage: required
-	Value type: <subnode>
-	Definition: codec dai sub-node
-
-- platform:
-	Usage: Optional
-	Value type: <subnode>
-	Definition: platform dai sub-node
-
-- sound-dai:
-	Usage: required
-	Value type: <phandle>
-	Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
-
-Example:
-
-audio {
-	compatible = "qcom,sdm845-sndcard";
-	model = "sdm845-snd-card";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>;
-	pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>;
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	pri-mi2s-dai-link {
-		link-name = "PRI MI2S Playback";
-		cpu {
-			sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
index 7d57eb91657a..70080d04ddc9 100644
--- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml
@@ -4,20 +4,27 @@
 $id: http://devicetree.org/schemas/sound/qcom,sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies Inc. SM8250 ASoC sound card driver
+title: Qualcomm Technologies Inc. ASoC sound card drivers
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 description:
-  This bindings describes SC8250 SoC based sound cards
+  This bindings describes Qualcomm SoC based sound cards
   which uses LPASS internal codec for audio.
 
 properties:
   compatible:
     enum:
-      - qcom,sm8250-sndcard
+      - lenovo,yoga-c630-sndcard
+      - qcom,apq8016-sbc-sndcard
+      - qcom,db845c-sndcard
+      - qcom,msm8916-qdsp6-sndcard
       - qcom,qrb5165-rb5-sndcard
+      - qcom,sc8280xp-sndcard
+      - qcom,sdm845-sndcard
+      - qcom,sm8250-sndcard
+      - qcom,sm8450-sndcard
 
   audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
@@ -27,10 +34,28 @@ properties:
       being the connection's source. Valid names could be power supplies,
       MicBias of codec and the jacks on the board.
 
+  aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      List of phandles pointing to auxiliary devices, such
+      as amplifiers, to be added to the sound card.
+
   model:
     $ref: /schemas/types.yaml#/definitions/string
     description: User visible long sound card name
 
+  pin-switches:
+    description: List of widget names for which pin switches should be created.
+    $ref: /schemas/types.yaml#/definitions/string-array
+
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  # Only valid for some compatibles (see allOf if below)
+  reg: true
+  reg-names: true
+
 patternProperties:
   ".*-dai-link$":
     description:
@@ -48,20 +73,30 @@ patternProperties:
       cpu:
         description: Holds subnode which indicates cpu dai.
         type: object
+        additionalProperties: false
+
         properties:
-          sound-dai: true
+          sound-dai:
+            maxItems: 1
 
       platform:
         description: Holds subnode which indicates platform dai.
         type: object
+        additionalProperties: false
+
         properties:
-          sound-dai: true
+          sound-dai:
+            maxItems: 1
 
       codec:
         description: Holds subnode which indicates codec dai.
         type: object
+        additionalProperties: false
+
         properties:
-          sound-dai: true
+          sound-dai:
+            minItems: 1
+            maxItems: 4
 
     required:
       - link-name
@@ -73,6 +108,34 @@ required:
   - compatible
   - model
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8016-sbc-sndcard
+              - qcom,msm8916-qdsp6-sndcard
+    then:
+      properties:
+        reg:
+          items:
+            - description: Microphone I/O mux register address
+            - description: Speaker I/O mux register address
+        reg-names:
+          items:
+            - const: mic-iomux
+            - const: spkr-iomux
+      required:
+        - compatible
+        - model
+        - reg
+        - reg-names
+    else:
+      properties:
+        reg: false
+        reg-names: false
+
 additionalProperties: false
 
 examples:
@@ -86,10 +149,7 @@ examples:
         audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
                     "SpkrRight IN", "WSA_SPK2 OUT",
                     "VA DMIC0", "vdd-micb",
-                    "VA DMIC1", "vdd-micb",
-                    "MM_DL1",  "MultiMedia1 Playback",
-                    "MM_DL2",  "MultiMedia2 Playback",
-                    "MultiMedia3 Capture", "MM_UL3";
+                    "VA DMIC1", "vdd-micb";
 
         mm1-dai-link {
             link-name = "MultiMedia0";
@@ -157,3 +217,98 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/sound/qcom,lpass.h>
+    sound@7702000 {
+        compatible = "qcom,apq8016-sbc-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "DB410c";
+        audio-routing =
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS External1";
+
+        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+        pinctrl-names = "default", "sleep";
+
+        quaternary-dai-link {
+            link-name = "ADV7533";
+            cpu {
+                sound-dai = <&lpass MI2S_QUATERNARY>;
+            };
+            codec {
+                sound-dai = <&adv_bridge 0>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "WCD";
+            cpu {
+                sound-dai = <&lpass MI2S_PRIMARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+
+        tertiary-dai-link {
+            link-name = "WCD-Capture";
+            cpu {
+                sound-dai = <&lpass MI2S_TERTIARY>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    #include <dt-bindings/sound/qcom,q6asm.h>
+    sound@7702000 {
+        compatible = "qcom,msm8916-qdsp6-sndcard";
+        reg = <0x07702000 0x4>, <0x07702004 0x4>;
+        reg-names = "mic-iomux", "spkr-iomux";
+
+        model = "msm8916";
+        widgets =
+            "Speaker", "Speaker",
+            "Headphone", "Headphones";
+        pin-switches = "Speaker";
+        audio-routing =
+            "Speaker", "Speaker Amp OUT",
+            "Speaker Amp IN", "HPH_R",
+            "Headphones", "HPH_L",
+            "Headphones", "HPH_R",
+            "AMIC1", "MIC BIAS Internal1",
+            "AMIC2", "MIC BIAS Internal2",
+            "AMIC3", "MIC BIAS Internal3";
+        aux-devs = <&speaker_amp>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cdc_pdm_lines_act>;
+        pinctrl-1 = <&cdc_pdm_lines_sus>;
+
+        mm1-dai-link {
+            link-name = "MultiMedia1";
+            cpu {
+                sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+            };
+        };
+
+        primary-dai-link {
+            link-name = "Primary MI2S";
+            cpu {
+                sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
+            };
+            platform {
+                sound-dai = <&q6routing>;
+            };
+            codec {
+                sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 9b225dbf8b79..8ca19f2b0b3d 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -127,7 +127,7 @@ properties:
 
   gpio@42:
     type: object
-    $ref: ../gpio/qcom,wcd934x-gpio.yaml#
+    $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml#
 
 patternProperties:
   "^.*@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
index cb74ce40c2e6..51547190f709 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -23,6 +23,10 @@ properties:
     description: GPIO spec for reset line to use
     maxItems: 1
 
+  us-euro-gpios:
+    description: GPIO spec for swapping gnd and mic segments
+    maxItems: 1
+
   vdd-buck-supply:
     description: A reference to the 1.8V buck supply
 
@@ -32,6 +36,9 @@ properties:
   vdd-io-supply:
     description: A reference to the 1.8V I/O supply
 
+  vdd-mic-bias-supply:
+    description: A reference to the 3.8V mic bias supply
+
   qcom,tx-device:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: A reference to Soundwire tx device phandle
diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
new file mode 100644
index 000000000000..6113f65f2990
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa883x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for The Qualcomm WSA8830/WSA8832/WSA8835
+  smart speaker amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA883X is the Qualcomm Aqstic smart speaker amplifier
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+properties:
+  compatible:
+    const: sdw10217020200
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD Supply for the Codec
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire-controller@3250000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x3250000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217020200";
+            reg = <0 1>;
+            powerdown-gpios = <&tlmm 1 0>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217020200";
+            reg = <0 2>;
+            powerdown-gpios = <&tlmm 89 0>;
+            vdd-supply = <&vreg_s10b_1p8>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
index fdb7f295ef2d..1d73204451b1 100644
--- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
@@ -25,6 +25,9 @@ properties:
       0 means shut down; 1 means power on.
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
index 2b8b7b51fe55..ca5b8987b749 100644
--- a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
@@ -21,6 +21,7 @@ properties:
     description: I2C address of the device.
 
   interrupts:
+    maxItems: 1
     description: The CODEC's interrupt output.
 
   realtek,dmic1-data-pin:
@@ -61,6 +62,10 @@ properties:
     description: |
       Set the delay time (ms) for the requirement of the particular DMIC.
 
+  realtek,amic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular platform or AMIC.
+
   realtek,dmic-clk-driving-high:
     type: boolean
     description: |
@@ -90,7 +95,7 @@ required:
 
 examples:
   - |
-    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
@@ -100,10 +105,9 @@ examples:
         codec@1a {
             compatible = "realtek,rt5682s";
             reg = <0x1a>;
-            interrupt-parent = <&gpio>;
-            interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+            interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
             realtek,ldo1-en-gpios =
-                <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+                <&gpio 2 GPIO_ACTIVE_HIGH>;
             realtek,dmic1-data-pin = <1>;
             realtek,dmic1-clk-pin = <1>;
             realtek,jd-src = <1>;
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index c2930d65728e..679a246dd666 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas R-Car Sound Driver Device Tree Bindings
+title: Renesas R-Car Sound Driver
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
@@ -123,14 +123,14 @@ properties:
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 
-# use patternProperties to avoid naming "xxx,yyy" issue
-patternProperties:
-  "^rcar_sound,dvc$":
+  rcar_sound,dvc:
     description: DVC subnode.
     type: object
     patternProperties:
       "^dvc-[0-1]$":
         type: object
+        additionalProperties: false
+
         properties:
           dmas:
             maxItems: 1
@@ -141,30 +141,32 @@ patternProperties:
           - dma-names
     additionalProperties: false
 
-  "^rcar_sound,mix$":
+  rcar_sound,mix:
     description: MIX subnode.
     type: object
     patternProperties:
       "^mix-[0-1]$":
         type: object
-        # no properties
+        additionalProperties: false
     additionalProperties: false
 
-  "^rcar_sound,ctu$":
+  rcar_sound,ctu:
     description: CTU subnode.
     type: object
     patternProperties:
       "^ctu-[0-7]$":
         type: object
-        # no properties
+        additionalProperties: false
     additionalProperties: false
 
-  "^rcar_sound,src$":
+  rcar_sound,src:
     description: SRC subnode.
     type: object
     patternProperties:
       "^src-[0-9]$":
         type: object
+        additionalProperties: false
+
         properties:
           interrupts:
             maxItems: 1
@@ -182,12 +184,14 @@ patternProperties:
           - dma-names
     additionalProperties: false
 
-  "^rcar_sound,ssiu$":
+  rcar_sound,ssiu:
     description: SSIU subnode.
     type: object
     patternProperties:
       "^ssiu-[0-9]+$":
         type: object
+        additionalProperties: false
+
         properties:
           dmas:
             maxItems: 2
@@ -202,12 +206,14 @@ patternProperties:
           - dma-names
     additionalProperties: false
 
-  "^rcar_sound,ssi$":
+  rcar_sound,ssi:
     description: SSI subnode.
     type: object
     patternProperties:
       "^ssi-[0-9]$":
         type: object
+        additionalProperties: false
+
         properties:
           interrupts:
             maxItems: 1
@@ -239,12 +245,14 @@ patternProperties:
     additionalProperties: false
 
   # For DAI base
-  "^rcar_sound,dai$":
+  rcar_sound,dai:
     description: DAI subnode.
     type: object
     patternProperties:
       "^dai([0-9]+)?$":
         type: object
+        additionalProperties: false
+
         properties:
           playback:
             $ref: /schemas/types.yaml#/definitions/phandle-array
diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
index 414ff8035a4e..0d9840375132 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L ASoC Sound Serial Interface (SSIF-2)
+title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2)
 
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
@@ -13,7 +13,9 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-ssi  # RZ/G2UL
           - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
+          - renesas,r9a07g054-ssi  # RZ/V2L
       - const: renesas,rz-ssi
 
   reg:
@@ -49,7 +51,7 @@ properties:
     minItems: 1
     maxItems: 2
     description:
-      The first cell represents a phandle to dmac
+      The first cell represents a phandle to dmac.
       The second cell specifies the encoded MID/RID values of the SSI port
       connected to the DMA client and the slave channel configuration
       parameters.
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
index 5ea16b8ef93f..7e36e389e976 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@@ -61,6 +61,13 @@ properties:
           - const: tx
           - const: rx
 
+  pinctrl-names:
+    oneOf:
+      - const: default
+      - items:
+          - const: bclk_on
+          - const: bclk_off
+
   power-domains:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index cd8c53d8497e..c5f2b8febcee 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -46,6 +46,8 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
+- #sound-dai-cells: Should be set to '<0>'.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
diff --git a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
index 5fff586dc802..447e013f6e17 100644
--- a/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml
@@ -23,21 +23,26 @@ properties:
 
   cpu:
     type: object
+    additionalProperties: false
     properties:
       sound-dai:
         minItems: 2
         maxItems: 2
-        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: |
           phandles to the I2S controller and bluetooth codec,
           in that order
+    required:
+      - sound-dai
 
   codec:
+    additionalProperties: false
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
         description: phandle to the WM8994 CODEC
+    required:
+      - sound-dai
 
   samsung,audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
@@ -146,4 +151,3 @@ examples:
             sound-dai = <&wm8994>;
         };
     };
-
diff --git a/Documentation/devicetree/bindings/sound/samsung,arndale.yaml b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml
new file mode 100644
index 000000000000..9bc4585bb6e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,arndale.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,arndale.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Insignal Arndale boards audio complex
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,arndale-alc5631
+      - samsung,arndale-rt5631
+      - samsung,arndale-wm1811
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,audio-cpu:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - samsung,audio-codec
+  - samsung,audio-cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "samsung,arndale-rt5631";
+        samsung,audio-cpu = <&i2s0>;
+        samsung,audio-codec = <&rt5631>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
index 095775c598fa..31095913e330 100644
--- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -19,9 +19,9 @@ properties:
 
   cpu:
     type: object
+    additionalProperties: false
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1
         description: phandle to the I2S controller
     required:
@@ -29,9 +29,9 @@ properties:
 
   codec:
     type: object
+    additionalProperties: false
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1
         description: phandle to the WM1811 CODEC
     required:
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index e8122bc87362..7b4e08ddef6a 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -37,18 +37,15 @@ properties:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandles to the I2S controllers
 
   codec:
     type: object
     properties:
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle-array
-        description: |
-          List of phandles to the CODEC nodes,
-          first entry must be corresponding to the MAX98090 CODEC and
-          the second entry must be the phandle of the HDMI IP block node.
+        items:
+          - description: phandle of the MAX98090 CODEC
+          - description: phandle of the HDMI IP block node
 
   samsung,audio-routing:
     $ref: /schemas/types.yaml#/definitions/non-unique-string-array
@@ -95,4 +92,3 @@ examples:
             sound-dai = <&hdmi>, <&max98090>;
         };
     };
-
diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt b/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt
deleted file mode 100644
index 4686646fb122..000000000000
--- a/Documentation/devicetree/bindings/sound/samsung,smdk-wm8994.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Samsung SMDK audio complex
-
-Required properties:
-- compatible : "samsung,smdk-wm8994"
-- samsung,i2s-controller: The phandle of the Samsung I2S0 controller
-- samsung,audio-codec: The phandle of the WM8994 audio codec
-Example:
-
-sound {
-		compatible = "samsung,smdk-wm8994";
-
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
-};
diff --git a/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml
new file mode 100644
index 000000000000..ac151d3c1d77
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,smdk5250.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,smdk5250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SMDK5250 audio complex with WM8994 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,smdk-wm8994
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  samsung,i2s-controller:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - samsung,audio-codec
+  - samsung,i2s-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "samsung,smdk-wm8994";
+        samsung,i2s-controller = <&i2s0>;
+        samsung,audio-codec = <&wm8994>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,snow.yaml b/Documentation/devicetree/bindings/sound/samsung,snow.yaml
new file mode 100644
index 000000000000..3d49aa4c9be2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,snow.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,snow.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Google Snow audio complex with MAX9809x codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - google,snow-audio-max98090
+      - google,snow-audio-max98091
+      - google,snow-audio-max98095
+
+  codec:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: List of phandles to the CODEC and HDMI IP nodes.
+        items:
+          - description: Phandle to the MAX98090, MAX98091 or MAX98095 CODEC.
+          - description: Phandle to the HDMI IP block node.
+    required:
+      - sound-dai
+
+  cpu:
+    type: object
+    additionalProperties: false
+    properties:
+      sound-dai:
+        description: Phandle to the Samsung I2S controller.
+        maxItems: 1
+    required:
+      - sound-dai
+
+  samsung,audio-codec:
+    description: Phandle to the audio codec.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  samsung,i2s-controller:
+    description: Phandle to the Samsung I2S controller.
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+
+  samsung,model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - codec
+  - cpu
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "google,snow-audio-max98095";
+        samsung,model = "Snow-I2S-MAX98095";
+
+        cpu {
+            sound-dai = <&i2s0 0>;
+        };
+
+        codec {
+            sound-dai = <&max98095 0>, <&hdmi>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
deleted file mode 100644
index f5ccc12ddc00..000000000000
--- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
-
-Required properties:
-
- - compatible		 : "samsung,tm2-audio"
- - model		 : the user-visible name of this sound complex
- - audio-codec		 : the first entry should be phandle of the wm5110 audio
-			   codec node, as described in ../mfd/arizona.txt;
-			   the second entry should be phandle of the HDMI
-			   transmitter node
- - i2s-controller	 : the list of phandle and argument tuples pointing to
-			   I2S controllers, the first entry should be I2S0 and
-			   the second one I2S1
- - audio-amplifier	 : the phandle of the MAX98504 amplifier
- - samsung,audio-routing : a list of the connections between audio components;
-			   each entry is a pair of strings, the first being the
-			   connection's sink, the second being the connection's
-			   source; valid names for sources and sinks are the
-			   WM5110's and MAX98504's pins and the jacks on the
-			   board: HP, SPK, Main Mic, Sub Mic, Third Mic,
-			   Headset Mic
- - mic-bias-gpios	 : GPIO pin that enables the Main Mic bias regulator
-
-
-Example:
-
-sound {
-	compatible = "samsung,tm2-audio";
-	audio-codec = <&wm5110>, <&hdmi>;
-	i2s-controller = <&i2s0 0>, <&i2s1 0>;
-	audio-amplifier = <&max98504>;
-	mic-bias-gpios = <&gpr3 2 0>;
-	model = "wm5110";
-	samsung,audio-routing =
-		"HP", "HPOUT1L",
-		"HP", "HPOUT1R",
-		"SPK", "SPKOUT",
-		"SPKOUT", "HPOUT2L",
-		"SPKOUT", "HPOUT2R",
-		"Main Mic", "MICBIAS2",
-		"IN1R", "Main Mic";
-};
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
new file mode 100644
index 000000000000..491e08019c04
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/samsung,tm2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,tm2-audio
+
+  audio-amplifier:
+    description: Phandle to the MAX98504 amplifier.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  audio-codec:
+    description: Phandles to the codecs.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to the WM5110 audio codec.
+      - description: Phandle to the HDMI transmitter node.
+
+  samsung,audio-routing:
+    description: |
+      List of the connections between audio components; each entry is
+      a pair of strings, the first being the connection's sink, the second
+      being the connection's source; valid names for sources and sinks are the
+      WM5110's and MAX98504's pins and the jacks on the board: HP, SPK, Main
+      Mic, Sub Mic, Third Mic, Headset Mic.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+
+  i2s-controller:
+    description: Phandles to the I2S controllers.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to I2S0.
+      - description: Phandle to I2S1.
+
+  mic-bias-gpios:
+    description: GPIO pin that enables the Main Mic bias regulator.
+
+  model:
+    description: The user-visible name of this sound complex.
+    $ref: /schemas/types.yaml#/definitions/string
+
+required:
+  - compatible
+  - audio-amplifier
+  - audio-codec
+  - samsung,audio-routing
+  - i2s-controller
+  - mic-bias-gpios
+  - model
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    sound {
+        compatible = "samsung,tm2-audio";
+        audio-codec = <&wm5110>, <&hdmi>;
+        i2s-controller = <&i2s0 0>, <&i2s1 0>;
+        audio-amplifier = <&max98504>;
+        mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+        model = "wm5110";
+        samsung,audio-routing = "HP", "HPOUT1L",
+                                "HP", "HPOUT1R",
+                                "SPK", "SPKOUT",
+                                "SPKOUT", "HPOUT2L",
+                                "SPKOUT", "HPOUT2R",
+                                "RCV", "HPOUT3L",
+                                "RCV", "HPOUT3R";
+    };
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index 2e3628ef48df..84c4d6cba521 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -110,12 +110,6 @@ properties:
       Internal DMA register base address of the audio
       subsystem (used in secondary sound source).
 
-  pinctrl-0:
-    description: Should specify pin control groups used for this controller.
-
-  pinctrl-names:
-    const: default
-
   power-domains:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/sound/serial-midi.yaml b/Documentation/devicetree/bindings/sound/serial-midi.yaml
new file mode 100644
index 000000000000..4afc29376efc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/serial-midi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/serial-midi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Serial MIDI Interface
+
+maintainers:
+  - Daniel Kaehn <kaehndan@gmail.com>
+
+description:
+  Generic MIDI interface using a serial device. This denotes that a serial device is
+  dedicated to MIDI communication, either to an external MIDI device through a DIN5
+  or other connector, or to a known hardwired MIDI controller. This device must be a
+  child node of a serial node.
+
+  Can only be set to use standard baud rates corresponding to supported rates of the
+  parent serial device. If the standard MIDI baud of 31.25 kBaud is needed
+  (as would be the case if interfacing with arbitrary external MIDI devices),
+  configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud
+  resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400 (default)
+
+properties:
+  compatible:
+    const: serial-midi
+
+  current-speed:
+    description: Baudrate to set the serial port to when this MIDI device is opened.
+    default: 38400
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+        };
+    };
+  - |
+    serial {
+        midi {
+            compatible = "serial-midi";
+            current-speed = <115200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.yaml b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
index e762c320b574..2bc7f00ce4a2 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.yaml
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.yaml
@@ -47,6 +47,7 @@ properties:
     description: The bias voltage to be used in mVolts. The voltage can take
       values from 1.25V to 3V by 250mV steps. If this node is not mentioned
       or the value is unknown, then the value is set to 1.25V.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
     enum: [ 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000 ]
 
   lrclk-strength:
diff --git a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
index 26379377a7ac..5428ba9e23a6 100644
--- a/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/sound/simple-audio-amplifier.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple Audio Amplifier Device Tree Bindings
+title: Simple Audio Amplifier
 
 maintainers:
   - Jerome Brunet <jbrunet@baylibre.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   compatible:
     enum:
@@ -22,10 +25,7 @@ properties:
     description: >
       power supply for the device
 
-  sound-name-prefix:
-    $ref: /schemas/types.yaml#/definitions/string
-    description: >
-      See ./name-prefix.txt
+  sound-name-prefix: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml
index 45fd9fd9eb54..ed19899bc94b 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.yaml
+++ b/Documentation/devicetree/bindings/sound/simple-card.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/simple-card.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple Audio Card Driver Device Tree Bindings
+title: Simple Audio Card Driver
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
@@ -48,6 +48,15 @@ definitions:
       It is useful for some aCPUs with fixed clocks.
     $ref: /schemas/types.yaml#/definitions/flag
 
+  system-clock-fixed:
+    description: |
+      Specifies that the clock frequency should not be modified.
+      Implied when system-clock-frequency is specified, but can be used when
+      a clock is mapped to the device whose frequency cannot or should not be
+      changed. When mclk-fs is also specified, this restricts the device to a
+      single fixed sampling rate.
+    $ref: /schemas/types.yaml#/definitions/flag
+
   mclk-fs:
     description: |
       Multiplication factor between stream rate and codec mclk.
@@ -134,6 +143,8 @@ definitions:
         $ref: "#/definitions/system-clock-frequency"
       system-clock-direction-out:
         $ref: "#/definitions/system-clock-direction-out"
+      system-clock-fixed:
+        $ref: "#/definitions/system-clock-fixed"
     required:
       - sound-dai
 
@@ -156,45 +167,45 @@ properties:
     description: User specified audio sound card name.
     $ref: /schemas/types.yaml#/definitions/string
 
-# use patternProperties to avoid naming "xxx,yyy" issue
-patternProperties:
-  "^simple-audio-card,widgets$":
+  simple-audio-card,widgets:
     $ref: "#/definitions/widgets"
-  "^simple-audio-card,routing$":
+  simple-audio-card,routing:
     $ref: "#/definitions/routing"
-  "^simple-audio-card,cpu(@[0-9a-f]+)?":
-    $ref: "#/definitions/dai"
-  "^simple-audio-card,codec(@[0-9a-f]+)?":
-    $ref: "#/definitions/dai"
 
   # common properties
-  "^simple-audio-card,frame-master$":
+  simple-audio-card,frame-master:
     $ref: "#/definitions/frame-master"
-  "^simple-audio-card,bitclock-master$":
+  simple-audio-card,bitclock-master:
     $ref: "#/definitions/bitclock-master"
-  "^simple-audio-card,frame-inversion$":
+  simple-audio-card,frame-inversion:
     $ref: "#/definitions/frame-inversion"
-  "^simple-audio-card,bitclock-inversion$":
+  simple-audio-card,bitclock-inversion:
     $ref: "#/definitions/bitclock-inversion"
-  "^simple-audio-card,format$":
+  simple-audio-card,format:
     $ref: "#/definitions/format"
-  "^simple-audio-card,mclk-fs$":
+  simple-audio-card,mclk-fs:
     $ref: "#/definitions/mclk-fs"
-  "^simple-audio-card,aux-devs$":
+  simple-audio-card,aux-devs:
     $ref: "#/definitions/aux-devs"
-  "^simple-audio-card,convert-rate$":
+  simple-audio-card,convert-rate:
     $ref: "#/definitions/convert-rate"
-  "^simple-audio-card,convert-channels$":
+  simple-audio-card,convert-channels:
     $ref: "#/definitions/convert-channels"
-  "^simple-audio-card,prefix$":
+  simple-audio-card,prefix:
     $ref: "#/definitions/prefix"
-  "^simple-audio-card,pin-switches$":
+  simple-audio-card,pin-switches:
     $ref: "#/definitions/pin-switches"
-  "^simple-audio-card,hp-det-gpio$":
+  simple-audio-card,hp-det-gpio:
     maxItems: 1
-  "^simple-audio-card,mic-det-gpio$":
+  simple-audio-card,mic-det-gpio:
     maxItems: 1
 
+patternProperties:
+  "^simple-audio-card,cpu(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+  "^simple-audio-card,codec(@[0-9a-f]+)?$":
+    $ref: "#/definitions/dai"
+
   "^simple-audio-card,dai-link(@[0-9a-f]+)?$":
     description: |
       Container for dai-link level properties and the CPU and CODEC sub-nodes.
diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt
deleted file mode 100644
index 80fd9a87bb3f..000000000000
--- a/Documentation/devicetree/bindings/sound/snow.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Audio Binding for Snow boards
-
-Required properties:
-- compatible : Can be one of the following,
-			"google,snow-audio-max98090" or
-			"google,snow-audio-max98091" or
-			"google,snow-audio-max98095"
-- samsung,i2s-controller (deprecated): The phandle of the Samsung I2S controller
-- samsung,audio-codec (deprecated): The phandle of the audio codec
-
-Required sub-nodes:
-
- - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S
-    controller
- - 'codec' subnode with a 'sound-dai' property containing list of phandles
-    to the CODEC nodes, first entry must be the phandle of the MAX98090,
-    MAX98091 or MAX98095 CODEC (exact device type is indicated by the compatible
-    string) and the second entry must be the phandle of the HDMI IP block node
-
-Optional:
-- samsung,model: The name of the sound-card
-
-Example:
-
-sound {
-		compatible = "google,snow-audio-max98095";
-
-		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&max98095>;
-};
diff --git a/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
new file mode 100644
index 000000000000..4b0795819064
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/snps,designware-i2s.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/snps,designware-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare I2S controller
+
+maintainers:
+  - Jose Abreu <joabreu@synopsys.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: canaan,k210-i2s
+          - const: snps,designware-i2s
+      - enum:
+          - snps,designware-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The interrupt line number for the I2S controller. Add this
+      parameter if the I2S controller that you are using does not
+      support DMA.
+    maxItems: 1
+
+  clocks:
+    description: Sampling rate reference clock
+    maxItems: 1
+
+  clock-names:
+    const: i2sclk
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+    minItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+    minItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: canaan,k210-i2s
+
+then:
+  properties:
+    "#sound-dai-cells":
+      const: 1
+
+else:
+  properties:
+    "#sound-dai-cells":
+      const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+oneOf:
+  - required:
+      - dmas
+      - dma-names
+  - required:
+      - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc_i2s: i2s@7ff90000 {
+      compatible = "snps,designware-i2s";
+      reg = <0x7ff90000 0x1000>;
+      clocks = <&scpi_i2sclk 0>;
+      clock-names = "i2sclk";
+      #sound-dai-cells = <0>;
+      dmas = <&dma0 5>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/sound/sound-dai.yaml b/Documentation/devicetree/bindings/sound/sound-dai.yaml
new file mode 100644
index 000000000000..ff9036e43c44
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sound-dai.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/sound-dai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Audio Interface consumer
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+select: true
+
+properties:
+  sound-dai:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A phandle plus args to digital audio interface provider(s)
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 1538d11ce9a8..56d206f97a96 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -60,6 +60,7 @@ required:
 patternProperties:
   "^audio-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description:
       Two subnodes corresponding to SAI sub-block instances A et B
       can be defined. Subnode can be omitted for unsused sub-block.
@@ -102,9 +103,11 @@ patternProperties:
           By default SAI sub-block is in asynchronous mode.
           Must contain the phandle and index of the SAI sub-block providing
           the synchronization.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/phandle-array
-          - maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          - items:
+              - description: phandle of the SAI sub-block
+              - description: index of the SAI sub-block
 
       st,iec60958:
         description:
@@ -113,13 +116,16 @@ patternProperties:
           By default, custom protocol is assumed, meaning that protocol is
           configured according to protocol defined in related DAI link node,
           such as i2s, left justified, right justified, dsp and pdm protocols.
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/flag
+        $ref: /schemas/types.yaml#/definitions/flag
 
       "#clock-cells":
         description: Configure the SAI device as master clock provider.
         const: 0
 
+      port:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+
     required:
       - compatible
       - "#sound-dai-cells"
@@ -135,8 +141,7 @@ allOf:
         compatible:
           contains:
             const: st,stm32f4-sai
-
-  - then:
+    then:
       properties:
         clocks:
           items:
@@ -147,8 +152,7 @@ allOf:
           items:
             - const: x8k
             - const: x11k
-
-  - else:
+    else:
       properties:
         clocks:
           items:
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index acd4bbe69731..30f6b029ac08 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Texas Instruments TAS2562 Smart PA
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The TAS2562 is a mono, digital input Class-D audio amplifier optimized for
@@ -76,4 +76,3 @@ examples:
        ti,imon-slot-no = <0>;
      };
    };
-
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 027bebf4e8cf..bc90e72bf7cf 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -80,4 +80,3 @@ examples:
        ti,vmon-slot-no = <2>;
      };
    };
-
diff --git a/Documentation/devicetree/bindings/sound/tas2764.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml
index 5bf8c76ecda1..66a0df8850ea 100644
--- a/Documentation/devicetree/bindings/sound/tas2764.yaml
+++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -1,25 +1,26 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# Copyright (C) 2020 Texas Instruments Incorporated
+# Copyright (C) 2020-2022 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/sound/tas2764.yaml#"
+$id: "http://devicetree.org/schemas/sound/tas27xx.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Texas Instruments TAS2764 Smart PA
+title: Texas Instruments TAS2764/TAS2780 Smart PA
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Shenghao Ding <shenghao-ding@ti.com>
 
 description: |
-  The TAS2764 is a mono, digital input Class-D audio amplifier optimized for
-  efficiently driving high peak power into small loudspeakers.
-  Integrated speaker voltage and current sense provides for
-  real time monitoring of loudspeaker behavior.
+  The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier
+  optimized for efficiently driving high peak power into small
+  loudspeakers. Integrated speaker voltage and current sense provides
+  for real time monitoring of loudspeaker behavior.
 
 properties:
   compatible:
     enum:
       - ti,tas2764
+      - ti,tas2780
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/tas5805m.yaml
new file mode 100644
index 000000000000..3aade02d8a96
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tas5805m.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tas5805m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TAS5805M audio amplifier
+
+maintainers:
+  - Daniel Beer <daniel.beer@igorinstitute.com>
+
+description: |
+  The TAS5805M is a class D audio amplifier with a built-in DSP.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas5805m
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address of the amplifier. See the datasheet for possible values.
+
+  pvdd-supply:
+    description: |
+      Regulator for audio power supply (PVDD in the datasheet).
+
+  pdn-gpios:
+    description: |
+      Power-down control GPIO (PDN pin in the datasheet).
+
+  ti,dsp-config-name:
+    description: |
+      The name of the DSP configuration that should be loaded for this
+      instance. Configuration blobs are sequences of register writes
+      generated from TI's PPC3 tool.
+    $ref: /schemas/types.yaml#/definitions/string
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tas5805m: tas5805m@2c {
+                reg = <0x2c>;
+                compatible = "ti,tas5805m";
+
+                pvdd-supply = <&audiopwr>;
+                pdn-gpios = <&tlmm 160 0>;
+
+                ti,dsp-config-name = "mono_pbtl_48khz";
+        };
+    };
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/sound/test-component.yaml b/Documentation/devicetree/bindings/sound/test-component.yaml
index 17fdb4317239..9c40a2122dfd 100644
--- a/Documentation/devicetree/bindings/sound/test-component.yaml
+++ b/Documentation/devicetree/bindings/sound/test-component.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/test-component.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Test Component Device Tree Bindings
+title: Test Component
 
 maintainers:
   - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index 6806f53a4aed..20ea5883b7ff 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -80,7 +80,6 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 6
           items:
             - description: AUXCLK clock for McASP used by CPB audio
             - description: Parent for CPB_McASP auxclk (for 48KHz)
@@ -107,7 +106,6 @@ allOf:
     then:
       properties:
         clocks:
-          maxItems: 4
           items:
             - description: AUXCLK clock for McASP used by CPB audio
             - description: Parent for CPB_McASP auxclk (for 48KHz)
diff --git a/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml
new file mode 100644
index 000000000000..9681b72b4918
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,src4xxx.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,src4xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments SRC4392 Device Tree Bindings
+
+description: |
+  The SRC4392 is a digital audio codec that can be connected via
+  I2C or SPI. Currently, only I2C bus is supported.
+
+maintainers:
+  - Matt Flax <flatmax@flatmax.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  compatible:
+    const: ti,src4392
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        audio-codec@70 {
+            #sound-dai-cells = <0>;
+            compatible = "ti,src4392";
+            reg = <0x70>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
new file mode 100644
index 000000000000..83936f594d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC
+
+maintainers:
+  - Ricard Wanderlof <ricardw@axis.com>
+
+description: |
+  Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC
+  https://www.ti.com/product/TLV320ADC3001
+  https://www.ti.com/product/TLV320ADC3101
+
+properties:
+  compatible:
+    enum:
+      - ti,tlv320adc3001
+      - ti,tlv320adc3101
+
+  reg:
+    maxItems: 1
+    description: I2C address
+
+  '#sound-dai-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO pin used for codec reset (RESET pin)
+
+  clocks:
+    maxItems: 1
+    description: Master clock (MCLK)
+
+  ti,dmdin-gpio1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMDIN/GPIO1 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+  ti,dmclk-gpio2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_GPIO_DISABLED       - I/O buffers powered down and not used
+      - 1 # ADC3XXX_GPIO_INPUT          - Various non-GPIO input functions
+      - 2 # ADC3XXX_GPIO_GPI            - General purpose input
+      - 3 # ADC3XXX_GPIO_GPO            - General purpose output
+      - 4 # ADC3XXX_GPIO_CLKOUT         - Clock source set in CLKOUT_MUX reg
+      - 5 # ADC3XXX_GPIO_INT1           - INT1 output
+      - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
+      - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
+    default: 0
+    description: |
+      Configuration for DMCLK/GPIO2 pin.
+
+      When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
+      ALSA control "GPIOx Output" to appear, as a switch control.
+
+      Note that there is currently no support for reading the GPIO pins as
+      inputs.
+
+  ti,micbias1-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS1 pin
+
+  ti,micbias2-vg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # ADC3XXX_MICBIAS_OFF		- Mic bias is powered down
+      - 1 # ADC3XXX_MICBIAS_2_0V	- Mic bias is set to 2.0V
+      - 2 # ADC3XXX_MICBIAS_2_5V	- Mic bias is set to 2.5V
+      - 3 # ADC3XXX_MICBIAS_AVDD	- Mic bias is same as AVDD supply
+    default: 0
+    description: |
+      Mic bias voltage output on MICBIAS2 pin
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/sound/tlv320adc3xxx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tlv320adc3101: audio-codec@18 {
+            compatible = "ti,tlv320adc3101";
+            reg = <0x18>;
+            reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>;
+            clocks = <&audio_mclk>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>;
+            ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>;
+        };
+    };
+
+    audio_mclk: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <24576000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml
new file mode 100644
index 000000000000..785930658029
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,ts3a227e.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,ts3a227e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TS3A227E
+  Autonomous Audio Accessory Detection and Configuration Switch
+
+maintainers:
+  - Dylan Reid <dgreid@chromium.org>
+
+description: |
+  The TS3A227E detect headsets of 3-ring and 4-ring standards and
+  switches automatically to route the microphone correctly. It also
+  handles key press detection in accordance with the Android audio
+  headset specification v1.0.
+
+properties:
+  compatible:
+    enum:
+      - ti,ts3a227e
+
+  reg:
+    const: 0x3b
+
+  interrupts:
+    maxItems: 1
+
+  ti,micbias:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Intended MICBIAS voltage (datasheet section 9.6.7).
+    enum:
+      - 0 # 2.1 V
+      - 1 # 2.2 V
+      - 2 # 2.3 V
+      - 3 # 2.4 V
+      - 4 # 2.5 V
+      - 5 # 2.6 V
+      - 6 # 2.7 V
+      - 7 # 2.8 V
+    default: 1
+
+  ti,debounce-release-ms:
+    description: key release debounce time in ms (datasheet section 9.6.7).
+    enum:
+      - 0
+      - 20
+    default: 20
+
+  ti,debounce-press-ms:
+    description: key press debounce time in ms (datasheet section 9.6.7).
+    enum:
+      - 2
+      - 40
+      - 80
+      - 120
+    default: 80
+
+  ti,debounce-insertion-ms:
+    description: headset insertion debounce time in ms (datasheet section 9.6.5).
+    enum:
+      - 2
+      - 30
+      - 60
+      - 90
+      - 120
+      - 150
+      - 1000
+      - 2000
+    default: 90
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec: audio-controller@3b {
+            compatible = "ti,ts3a227e";
+            reg = <0x3b>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index d77c8283526d..ee698614862e 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
@@ -68,9 +68,9 @@ properties:
        array is defined as <PDMIN1 PDMIN2 PDMIN3 PDMIN4>.
 
        0 - (default) Odd channel is latched on the negative edge and even
-       channel is latched on the the positive edge.
+       channel is latched on the positive edge.
        1 - Odd channel is latched on the positive edge and even channel is
-       latched on the the negative edge.
+       latched on the negative edge.
 
        PDMIN1 - PDMCLK latching edge used for channel 1 and 2 data
        PDMIN2 - PDMCLK latching edge used for channel 3 and 4 data
@@ -176,13 +176,12 @@ patternProperties:
        4 - Drive weak low and active high
        5 - Drive Hi-Z and active high
 
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - minItems: 2
-        maxItems: 2
-        items:
-          maximum: 15
-        default: [2, 2]
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maximum: 15
+    default: [2, 2]
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
index e372303697dc..bbad98d5b986 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@@ -58,7 +58,7 @@ The pins can be used in referring sound node's audio-routing property.
 
 Example:
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
 
 tlv320aic31xx: tlv320aic31xx@18 {
 	compatible = "ti,tlv320aic311x";
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt
deleted file mode 100644
index 21ab45bc7e8f..000000000000
--- a/Documentation/devicetree/bindings/sound/ts3a227e.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Texas Instruments TS3A227E
-Autonomous Audio Accessory Detection and Configuration Switch
-
-The TS3A227E detect headsets of 3-ring and 4-ring standards and
-switches automatically to route the microphone correctly.  It also
-handles key press detection in accordance with the Android audio
-headset specification v1.0.
-
-Required properties:
-
- - compatible:		Should contain "ti,ts3a227e".
- - reg:			The i2c address. Should contain <0x3b>.
- - interrupts:		Interrupt number for /INT pin from the 227e
-
-Optional properies:
- - ti,micbias:   Intended MICBIAS voltage (datasheet section 9.6.7).
-      Select 0/1/2/3/4/5/6/7 to specify MICBIAS voltage
-      2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
-      Default value is "1" (2.2V).
-
-Examples:
-
-	i2c {
-		ts3a227e@3b {
-			compatible = "ti,ts3a227e";
-			reg = <0x3b>;
-			interrupt-parent = <&gpio>;
-			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
new file mode 100644
index 000000000000..15795f63b5a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson Microelectromics WM8731 audio CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Wolfson Microelectronics WM8731 audio CODEC
+
+  Pins on the device (for linking into audio routes):
+    * LOUT: Left Channel Line Output
+    * ROUT: Right Channel Line Output
+    * LHPOUT: Left Channel Headphone Output
+    * RHPOUT: Right Channel Headphone Output
+    * LLINEIN: Left Channel Line Input
+    * RLINEIN: Right Channel Line Input
+    * MICIN: Microphone Input
+
+properties:
+  compatible:
+    enum:
+      - wlf,wm8731
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    description: Clock provider for MCLK pin.
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  HPVDD-supply:
+    description: Headphone power supply regulator on the HPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+required:
+  - reg
+  - compatible
+  - AVDD-supply
+  - HPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_i2c: codec@0 {
+            compatible = "wlf,wm8731";
+            reg = <0>;
+            spi-max-frequency = <12500000>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
+  - |
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        wm8731_spi: codec@1b {
+            compatible = "wlf,wm8731";
+            reg = <0x1b>;
+
+            AVDD-supply = <&avdd_reg>;
+            HPVDD-supply = <&hpvdd_reg>;
+            DCVDD-supply = <&dcvdd_reg>;
+            DBVDD-supply = <&dbvdd_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
new file mode 100644
index 000000000000..7105ed5fd6c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/wlf,wm8903.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: WM8903 audio codec
+
+description: |
+  This device supports I2C only.
+  Pins on the device (for linking into audio routes):
+      * IN1L
+      * IN1R
+      * IN2L
+      * IN2R
+      * IN3L
+      * IN3R
+      * DMICDAT
+      * HPOUTL
+      * HPOUTR
+      * LINEOUTL
+      * LINEOUTR
+      * LOP
+      * LON
+      * ROP
+      * RON
+      * MICBIAS
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8903
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  micdet-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Default register value for R6 (Mic Bias).
+
+  micdet-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 100
+    description: The debounce delay for microphone detection in mS.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      minItems: 5
+      maxItems: 5
+      A list of GPIO configuration register values.
+      If absent, no configuration of these registers is performed.
+      If any entry has the value 0xffffffff, that GPIO's
+      configuration will not be modified.
+
+  AVDD-supply:
+    description: Analog power supply regulator on the AVDD pin.
+
+  CPVDD-supply:
+    description: Charge pump supply regulator on the CPVDD pin.
+
+  DBVDD-supply:
+    description: Digital buffer supply regulator for the DBVDD pin.
+
+  DCVDD-supply:
+    description: Digital core supply regulator for the DCVDD pin.
+
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      wm8903: codec@1a {
+        compatible = "wlf,wm8903";
+        reg = <0x1a>;
+        interrupts = <347>;
+
+        AVDD-supply = <&fooreg_a>;
+        CPVDD-supply = <&fooreg_b>;
+        DBVDD-supply = <&fooreg_c>;
+        DCVDD-supply = <&fooreg_d>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        micdet-cfg = <0>;
+        micdet-delay = <100>;
+        gpio-cfg = <
+          0x0600 /* DMIC_LR, output */
+          0x0680 /* DMIC_DAT, input */
+          0x0000 /* GPIO, output, low */
+          0x0200 /* Interrupt, output */
+          0x01a0 /* BCLK, input, active high */
+        >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml
new file mode 100644
index 000000000000..7386abb3a250
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8940.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8940.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8940 Codec
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8940
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8940";
+            reg = <0x1a>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
index 96cf9fc9c8b0..1c8985d4dd5a 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sound/wlf,wm8978.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Wolfson WM8978 Codec Device Tree Bindings
+title: Wolfson WM8978 Codec
 
 maintainers:
   - patches@opensource.cirrus.com
diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt
deleted file mode 100644
index f660d9bb0e69..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8731.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-WM8731 audio CODEC
-
-This device supports both I2C and SPI (configured with pin strapping
-on the board).
-
-Required properties:
-
-  - compatible : "wlf,wm8731"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-Example:
-
-wm8731: codec@1a {
-	compatible = "wlf,wm8731";
-	reg = <0x1a>;
-};
-
-Available audio endpoints for an audio-routing table:
- * LOUT: Left Channel Line Output
- * ROUT: Right Channel Line Output
- * LHPOUT: Left Channel Headphone Output
- * RHPOUT: Right Channel Headphone Output
- * LLINEIN: Left Channel Line Input
- * RLINEIN: Right Channel Line Input
- * MICIN: Microphone Input
diff --git a/Documentation/devicetree/bindings/sound/wm8903.txt b/Documentation/devicetree/bindings/sound/wm8903.txt
deleted file mode 100644
index 6371c2434afe..000000000000
--- a/Documentation/devicetree/bindings/sound/wm8903.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-WM8903 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "wlf,wm8903"
-
-  - reg : the I2C address of the device.
-
-  - gpio-controller : Indicates this device is a GPIO controller.
-
-  - #gpio-cells : Should be two. The first cell is the pin number and the
-    second cell is used to specify optional parameters (currently unused).
-
-Optional properties:
-
-  - interrupts : The interrupt line the codec is connected to.
-
-  - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
-    default is 0.
-
-  - micdet-delay : The debounce delay for microphone detection in mS. If
-    absent, the default is 100.
-
-  - gpio-cfg : A list of GPIO configuration register values. The list must
-    be 5 entries long. If absent, no configuration of these registers is
-    performed. If any entry has the value 0xffffffff, that GPIO's
-    configuration will not be modified.
-
-  - AVDD-supply : Analog power supply regulator on the AVDD pin.
-
-  - CPVDD-supply : Charge pump supply regulator on the CPVDD pin.
-
-  - DBVDD-supply : Digital buffer supply regulator for the DBVDD pin.
-
-  - DCVDD-supply : Digital core supply regulator for the DCVDD pin.
-
-Pins on the device (for linking into audio routes):
-
-  * IN1L
-  * IN1R
-  * IN2L
-  * IN2R
-  * IN3L
-  * IN3R
-  * DMICDAT
-  * HPOUTL
-  * HPOUTR
-  * LINEOUTL
-  * LINEOUTR
-  * LOP
-  * LON
-  * ROP
-  * RON
-  * MICBIAS
-
-Example:
-
-wm8903: codec@1a {
-	compatible = "wlf,wm8903";
-	reg = <0x1a>;
-	interrupts = < 347 >;
-
-	AVDD-supply = <&fooreg_a>;
-	CPVDD-supply = <&fooreg_b>;
-	DBVDD-supply = <&fooreg_c>;
-	DCVDC-supply = <&fooreg_d>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	micdet-cfg = <0>;
-	micdet-delay = <100>;
-	gpio-cfg = <
-		0x0600 /* DMIC_LR, output */
-		0x0680 /* DMIC_DAT, input */
-		0x0000 /* GPIO, output, low */
-		0x0200 /* Interrupt, output */
-		0x01a0 /* BCLK, input, active high */
-	>;
-};
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
index b93a2b3e029d..c85c25779e3f 100644
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -22,7 +22,19 @@ board specific bus parameters.
 - interrupts:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller IRQ
+	Definition: should specify the SoundWire Controller core and optional
+		    wake IRQ
+
+- interrupt-names:
+	Usage: Optional
+	Value type: boolean
+	Value type: <stringlist>
+	Definition: should be "core" for core and "wakeup" for wake interrupt.
+
+- wakeup-source:
+	Usage: Optional
+	Value type: boolean
+	Definition: should specify if SoundWire Controller is wake up capable.
 
 - clock-names:
 	Usage: required
@@ -150,6 +162,18 @@ board specific bus parameters.
 		    or applicable for the respective data port.
 		    More info in MIPI Alliance SoundWire 1.0 Specifications.
 
+- reset:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: Should specify the SoundWire audio CSR reset controller interface,
+		    which is required for SoundWire version 1.6.0 and above.
+
+- reset-names:
+	Usage: optional
+	Value type: <stringlist>
+	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
+		    controller interface.
+
 Note:
 	More Information on detail of encoding of these fields can be
 found in MIPI Alliance SoundWire 1.0 Specifications.
@@ -168,6 +192,8 @@ soundwire: soundwire@c85 {
 	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 	clocks = <&wcc>;
 	clock-names = "iface";
+	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+	reset-names = "swr_audio_cgcr";
 	#sound-dai-cells = <1>;
 	qcom,dports-type = <0>;
 	qcom,dout-ports	= <6>;
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
index 8036499112f5..f1176a28fd87 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/allwinner,sun4i-a10-spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 SPI Controller Device Tree Bindings
+title: Allwinner A10 SPI Controller
 
 allOf:
   - $ref: "spi-controller.yaml"
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 908248260afa..58b7056f4a70 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/allwinner,sun6i-a31-spi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 SPI Controller Device Tree Bindings
+title: Allwinner A31 SPI Controller
 
 allOf:
   - $ref: "spi-controller.yaml"
@@ -26,6 +26,7 @@ properties:
               - allwinner,sun8i-r40-spi
               - allwinner,sun50i-h6-spi
               - allwinner,sun50i-h616-spi
+              - allwinner,suniv-f1c100s-spi
           - const: allwinner,sun8i-h3-spi
 
   reg:
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 4d46c49ec32b..0c10f7678178 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SPI Communication Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
   - $ref: "spi-controller.yaml#"
@@ -95,4 +95,3 @@ examples:
               reg = <0>;
           };
     };
-
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
index 54b6f15eca18..ac3b2ec300ac 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson SPI Flash Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
   - $ref: "spi-controller.yaml#"
@@ -52,4 +52,3 @@ examples:
               spi-max-frequency = <40000000>;
           };
     };
-
diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
new file mode 100644
index 000000000000..fa8f4ac20985
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SMC controllers bindings
+
+maintainers:
+  - Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
+  - Cédric Le Goater <clg@kaod.org>
+
+description: |
+  This binding describes the Aspeed Static Memory Controllers (FMC and
+  SPI) of the AST2400, AST2500 and AST2600 SOCs.
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fmc
+      - aspeed,ast2600-spi
+      - aspeed,ast2500-fmc
+      - aspeed,ast2500-spi
+      - aspeed,ast2400-fmc
+      - aspeed,ast2400-spi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    spi@1e620000 {
+        reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "aspeed,ast2600-fmc";
+        clocks = <&syscon ASPEED_CLK_AHB>;
+        interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+
+        flash@0 {
+                reg = < 0 >;
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                spi-rx-bus-width = <2>;
+        };
+
+        flash@1 {
+                reg = < 1 >;
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                spi-rx-bus-width = <2>;
+        };
+
+        flash@2 {
+                reg = < 2 >;
+                compatible = "jedec,spi-nor";
+                spi-max-frequency = <50000000>;
+                spi-rx-bus-width = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
new file mode 100644
index 000000000000..4dd973e341e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/atmel,at91rm9200-spi.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/atmel,at91rm9200-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SPI device
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,at91rm9200-spi
+      - items:
+          - const: microchip,sam9x60-spi
+          - const: atmel,at91rm9200-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    contains:
+      const: spi_clk
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for FIFO
+      capable SPI controllers.
+    enum: [ 16, 32 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi1: spi@fffcc000 {
+        compatible = "atmel,at91rm9200-spi";
+        reg = <0xfffcc000 0x4000>;
+        interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&spi1_clk>;
+        clock-names = "spi_clk";
+        cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+        atmel,fifo-size = <32>;
+
+        mmc@0 {
+            compatible = "mmc-spi-slot";
+            reg = <0>;
+            gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;    /* CD */
+            spi-max-frequency = <25000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
index 553601a441a7..510b82c177c0 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml
@@ -10,7 +10,7 @@ description:
   See spi-peripheral-props.yaml for more info.
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Vaishnav Achath <vaishnav.a@ti.com>
 
 properties:
   # cdns,qspi-nor.yaml
diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
index 0a537fa3a641..4707294d8f59 100644
--- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence Quad SPI controller
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Vaishnav Achath <vaishnav.a@ti.com>
 
 allOf:
   - $ref: spi-controller.yaml#
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
deleted file mode 100644
index e0fa61a1be0c..000000000000
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Energy Micro EFM32 SPI
-
-Required properties:
-- #address-cells: see spi-bus.txt
-- #size-cells: see spi-bus.txt
-- compatible: should be "energymicro,efm32-spi"
-- reg: Offset and length of the register set for the controller
-- interrupts: pair specifying rx and tx irq
-- clocks: phandle to the spi clock
-- cs-gpios: see spi-bus.txt
-
-Recommended properties :
-- energymicro,location: Value to write to the ROUTE register's LOCATION
-                        bitfield to configure the pinmux for the device, see
-                        datasheet for values.
-                        If this property is not provided, keeping what is
-                        already configured in the hardware, so its either the
-                        reset default 0 or whatever the bootloader did.
-
-Example:
-
-spi1: spi@4000c400 { /* USART1 */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "energymicro,efm32-spi";
-	reg = <0x4000c400 0x400>;
-	interrupts = <15 16>;
-	clocks = <&cmu 20>;
-	cs-gpios = <&gpio 51 1>; // D3
-	energymicro,location = <1>;
-
-	ks8851@0 {
-		compatible = "ks8851";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-		interrupt-parent = <&boardfpga>;
-		interrupts = <4>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
new file mode 100644
index 000000000000..7797c3123b7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/hpe,gxp-spifi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP spi controller flash interface
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-spifi
+
+  reg:
+    items:
+      - description: cfg registers
+      - description: data registers
+      - description: mapped memory
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    spi@200 {
+      compatible = "hpe,gxp-spifi";
+      reg = <0x200 0x80>, <0xc000 0x100>, <0x38000000 0x800000>;
+      interrupts = <20>;
+      interrupt-parent = <&vic0>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        reg = <0>;
+        compatible = "jedec,spi-nor";
+      };
+
+      flash@1 {
+        reg = <1>;
+        compatible = "jedec,spi-nor";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
index 5b1c7a2a6a31..360f76c226d9 100644
--- a/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
+++ b/Documentation/devicetree/bindings/spi/ingenic,spi.yaml
@@ -18,7 +18,10 @@ properties:
     oneOf:
       - enum:
           - ingenic,jz4750-spi
+          - ingenic,jz4775-spi
           - ingenic,jz4780-spi
+          - ingenic,x1000-spi
+          - ingenic,x2000-spi
       - items:
           - enum:
               - ingenic,jz4760-spi
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
new file mode 100644
index 000000000000..8d2a6c084eab
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Bus controller for MediaTek ARM SoCs
+
+maintainers:
+  - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7629-spi
+              - mediatek,mt8365-spi
+          - const: mediatek,mt7622-spi
+      - items:
+          - enum:
+              - mediatek,mt8516-spi
+          - const: mediatek,mt2712-spi
+      - items:
+          - enum:
+              - mediatek,mt6779-spi
+              - mediatek,mt8186-spi
+              - mediatek,mt8192-spi
+              - mediatek,mt8195-spi
+          - const: mediatek,mt6765-spi
+      - items:
+          - enum:
+              - mediatek,mt7986-spi-ipm
+              - mediatek,mt8188-spi-ipm
+          - const: mediatek,spi-ipm
+      - items:
+          - enum:
+              - mediatek,mt2701-spi
+              - mediatek,mt2712-spi
+              - mediatek,mt6589-spi
+              - mediatek,mt6765-spi
+              - mediatek,mt6893-spi
+              - mediatek,mt7622-spi
+              - mediatek,mt8135-spi
+              - mediatek,mt8173-spi
+              - mediatek,mt8183-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: clock used for the parent clock
+      - description: clock used for the muxes clock
+      - description: clock used for the clock gate
+      - description: clock used for the AHB bus, this clock is optional
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: parent-clk
+      - const: sel-clk
+      - const: spi-clk
+      - const: hclk
+
+  mediatek,pad-select:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      specify which pins group(ck/mi/mo/cs) spi controller used.
+      This is an array.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi@1100a000 {
+      compatible = "mediatek,mt8173-spi";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0x1100a000 0x1000>;
+      interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+               <&topckgen CLK_TOP_SPI_SEL>,
+               <&pericfg CLK_PERI_SPI0>;
+      clock-names = "parent-clk", "sel-clk", "spi-clk";
+      cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+      mediatek,pad-select = <1>, <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
index 4e4694e3d539..a453996c13f2 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
@@ -18,11 +18,15 @@ description: |
   capability of this controller.
 
 allOf:
-  - $ref: /spi/spi-controller.yaml#
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
     oneOf:
+      - enum:
+          - mediatek,mt8173-nor
+          - mediatek,mt8186-nor
+          - mediatek,mt8192-nor
       - items:
           - enum:
               - mediatek,mt2701-nor
@@ -30,12 +34,13 @@ properties:
               - mediatek,mt7622-nor
               - mediatek,mt7623-nor
               - mediatek,mt7629-nor
-              - mediatek,mt8192-nor
               - mediatek,mt8195-nor
-          - enum:
-              - mediatek,mt8173-nor
-      - items:
           - const: mediatek,mt8173-nor
+      - items:
+          - enum:
+              - mediatek,mt8188-nor
+          - const: mediatek,mt8186-nor
+
   reg:
     maxItems: 1
 
@@ -49,6 +54,8 @@ properties:
       - description: clock used for controller
       - description: clock used for nor dma bus. this depends on hardware
                      design, so this is optional.
+      - description: clock used for controller axi slave bus.
+                     this depends on hardware design, so it is optional.
 
   clock-names:
     minItems: 2
@@ -56,11 +63,11 @@ properties:
       - const: spi
       - const: sf
       - const: axi
+      - const: axi_s
 
 required:
   - compatible
   - reg
-  - interrupts
   - clocks
   - clock-names
 
@@ -78,8 +85,9 @@ examples:
         compatible = "mediatek,mt8173-nor";
         reg = <0 0x1100d000 0 0xe0>;
         interrupts = <1>;
-        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
-        clock-names = "spi", "sf";
+        clocks = <&pericfg CLK_PERI_SPI>, <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+                 <&pericfg CLK_PERI_NFI>;
+        clock-names = "spi", "sf", "axi";
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
new file mode 100644
index 000000000000..6e6e02c91780
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash controller for MediaTek ARM SoCs
+
+maintainers:
+  - Chuanhong Guo <gch981213@gmail.com>
+
+description: |
+  The Mediatek SPI-NAND flash controller is an extended version of
+  the Mediatek NAND flash controller. It can perform standard SPI
+  instructions with one continuous write and one read for up-to 0xa0
+  bytes. It also supports typical SPI-NAND page cache operations
+  in single, dual or quad IO mode with pipelined ECC encoding/decoding
+  using the accompanying ECC engine. There should be only one spi
+  slave device following generic spi bindings.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-snand
+      - mediatek,mt7629-snand
+
+  reg:
+    items:
+      - description: core registers
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    items:
+      - description: clock used for the controller
+      - description: clock used for the SPI bus
+
+  clock-names:
+    items:
+      - const: nfi_clk
+      - const: pad_clk
+
+  nand-ecc-engine:
+    description: device-tree node of the accompanying ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nand-ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      snfi: spi@1100d000 {
+        compatible = "mediatek,mt7622-snand";
+        reg = <0 0x1100d000 0 0x1000>;
+        interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+        clock-names = "nfi_clk", "pad_clk";
+        nand-ecc-engine = <&bch>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "spi-nand";
+          reg = <0>;
+          spi-tx-bus-width = <4>;
+          spi-rx-bus-width = <4>;
+          nand-ecc-engine = <&snfi>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
new file mode 100644
index 000000000000..7977799a8ee1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-slave-mt27xx.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mediatek,spi-slave-mt27xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI Slave controller for MediaTek ARM SoCs
+
+maintainers:
+  - Leilk Liu <leilk.liu@mediatek.com>
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2712-spi-slave
+      - mediatek,mt8195-spi-slave
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: spi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi@10013000 {
+      compatible = "mediatek,mt2712-spi-slave";
+      reg = <0x10013000 0x100>;
+      interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+      clock-names = "spi";
+      assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
new file mode 100644
index 000000000000..1051690e3753
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/microchip,mpfs-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip FPGA {Q,}SPI Controllers
+
+description:
+  SPI and QSPI controllers on Microchip PolarFire SoC and the "soft"/
+  fabric IP cores they are based on
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-qspi
+          - const: microchip,coreqspi-rtl-v2
+      - const: microchip,coreqspi-rtl-v2 #FPGA QSPI
+      - const: microchip,mpfs-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    spi@20108000 {
+        compatible = "microchip,mpfs-spi";
+        reg = <0x20108000 0x1000>;
+        clocks = <&clkcfg CLK_SPI0>;
+        interrupt-parent = <&plic>;
+        interrupts = <54>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
new file mode 100644
index 000000000000..a3aa5e07c0e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxicy,mx25f0a-spi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/mxicy,mx25f0a-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix SPI controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: mxicy,mx25f0a-spi
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: send_clk
+      - const: send_dly_clk
+      - const: ps_clk
+
+  nand-ecc-engine:
+    description: NAND ECC engine used by the SPI controller in order to perform
+      on-the-fly correction when using a SPI-NAND memory.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi@43c30000 {
+      compatible = "mxicy,mx25f0a-spi";
+      reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>;
+      reg-names = "regs", "dirmap";
+      clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>;
+      clock-names = "send_clk", "send_dly_clk", "ps_clk";
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
index a388005842ad..c63ce4cc0a80 100644
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-fiu.txt
@@ -6,8 +6,13 @@ The NPCM7XX supports three FIU modules,
 FIU0 and FIUx supports two chip selects,
 FIU3 support four chip select.
 
+The NPCM8XX supports four FIU modules,
+FIU0 and FIUx supports two chip selects,
+FIU1 and FIU3 supports four chip selects.
+
 Required properties:
-  - compatible : "nuvoton,npcm750-fiu" for the NPCM7XX BMC
+  - compatible : "nuvoton,npcm750-fiu" for Poleg NPCM7XX BMC
+			     "nuvoton,npcm845-fiu" for Arbel NPCM8XX BMC
   - #address-cells : should be 1.
   - #size-cells : should be 0.
   - reg : the first contains the register location and length,
@@ -30,6 +35,12 @@ Aliases:
   		fiu1 represent fiu 3 controller
   		fiu2 represent fiu x controller
 
+  In the NPCM8XX BMC:
+  		fiu0 represent fiu 0 controller
+  		fiu1 represent fiu 1 controller
+  		fiu2 represent fiu 3 controller
+  		fiu3 represent fiu x controller
+
 Example:
 fiu3: spi@c00000000 {
 	compatible = "nuvoton,npcm750-fiu";
diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
index b98203ca656d..a4e72e52af59 100644
--- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
+++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt
@@ -3,7 +3,8 @@ Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver
 Nuvoton NPCM7xx SOC support two PSPI channels.
 
 Required properties:
- - compatible : "nuvoton,npcm750-pspi" for NPCM7XX BMC
+ - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX.
+				"nuvoton,npcm845-pspi" for Arbel NPCM8XX.
  - #address-cells : should be 1. see spi-bus.txt
  - #size-cells : should be 0. see spi-bus.txt
  - specifies physical base address and size of the register.
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml
new file mode 100644
index 000000000000..2c3cada75339
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad-peripheral-props.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Tegra Quad SPI Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  nvidia,tx-clk-tap-delay:
+    description:
+      Delays the clock going out to device with this tap value.
+      Tap value varies based on platform design trace lengths from Tegra
+      QSPI to corresponding slave device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+
+  nvidia,rx-clk-tap-delay:
+    description:
+      Delays the clock coming in from the device with this tap value.
+      Tap value varies based on platform design trace lengths from Tegra
+      QSPI to corresponding slave device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 35a8045b2c70..6b733e5c1163 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -19,6 +19,8 @@ properties:
       - nvidia,tegra210-qspi
       - nvidia,tegra186-qspi
       - nvidia,tegra194-qspi
+      - nvidia,tegra234-qspi
+      - nvidia,tegra241-qspi
 
   reg:
     maxItems: 1
@@ -56,27 +58,6 @@ patternProperties:
       spi-tx-bus-width:
         enum: [1, 2, 4]
 
-      nvidia,tx-clk-tap-delay:
-        description:
-          Delays the clock going out to device with this tap value.
-          Tap value varies based on platform design trace lengths from Tegra
-          QSPI to corresponding slave device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 31
-
-      nvidia,rx-clk-tap-delay:
-        description:
-          Delays the clock coming in from the device with this tap value.
-          Tap value varies based on platform design trace lengths from Tegra
-          QSPI to corresponding slave device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 255
-
-    required:
-      - reg
-
 required:
   - compatible
   - reg
@@ -106,7 +87,7 @@ examples:
             dma-names = "rx", "tx";
 
             flash@0 {
-                    compatible = "spi-nor";
+                    compatible = "jedec,spi-nor";
                     reg = <0>;
                     spi-max-frequency = <104000000>;
                     spi-tx-bus-width = <2>;
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
deleted file mode 100644
index c8c1e913f4e7..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP v3 core is a GENI based AHB slave that provides a common data path
-(an output FIFO and an input FIFO) for serial peripheral interface (SPI)
-mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible:		Must contain "qcom,geni-spi".
-- reg:			Must contain SPI register location and length.
-- interrupts:		Must contain SPI controller interrupts.
-- clock-names:		Must contain "se".
-- clocks:		Serial engine core clock needed by the device.
-- #address-cells:	Must be <1> to define a chip select address on
-			the SPI bus.
-- #size-cells:		Must be <0>.
-
-SPI Controller nodes must be child of GENI based Qualcomm Universal
-Peripharal. Please refer GENI based QUP wrapper controller node bindings
-described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
-
-SPI slave nodes must be children of the SPI master node and conform to SPI bus
-binding as described in Documentation/devicetree/bindings/spi/spi-bus.txt.
-
-Example:
-	spi0: spi@a84000 {
-		compatible = "qcom,geni-spi";
-		reg = <0xa84000 0x4000>;
-		interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-		clock-names = "se";
-		clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&qup_1_spi_2_active>;
-		pinctrl-1 = <&qup_1_spi_2_sleep>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
new file mode 100644
index 000000000000..2e20ca313ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP v3 core is a GENI based AHB slave that provides a common data path
+  (an output FIFO and an input FIFO) for serial peripheral interface (SPI)
+  mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+  SPI Controller nodes must be child of GENI based Qualcomm Universal
+  Peripharal. Please refer GENI based QUP wrapper controller node bindings
+  described in Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: qcom,geni-spi
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: se
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    spi@880000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&qup_opp_table>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+        interconnect-names = "qup-core", "qup-config";
+    };
+
+  - |
+    #include <dt-bindings/dma/qcom-gpi.h>
+
+    spi@884000 {
+        compatible = "qcom,geni-spi";
+        reg = <0x00884000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+        dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+               <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_spi1_default>;
+        interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 055524fe8327..b622bb7363ec 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -8,15 +8,14 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Qualcomm Quad Serial Peripheral Interface (QSPI)
 
 maintainers:
-  - Mukesh Savaliya <msavaliy@codeaurora.org>
-  - Akash Asthana <akashast@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: The QSPI controller allows SPI protocol communication in single,
   dual, or quad wire transmission modes for read/write access to slaves such
   as NOR flash.
 
 allOf:
-  - $ref: /spi/spi-controller.yaml#
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
@@ -49,6 +48,7 @@ properties:
     maxItems: 2
 
   interconnect-names:
+    minItems: 1
     items:
       - const: qspi-config
       - const: qspi-memory
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
deleted file mode 100644
index 5c090771c016..000000000000
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
-
-The QUP core is an AHB slave that provides a common data path (an output FIFO
-and an input FIFO) for serial peripheral interface (SPI) mini-core.
-
-SPI in master mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Required properties:
-- compatible:     Should contain:
-		  "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
-		  "qcom,spi-qup-v2.1.1" for 8974 and later
-		  "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
-
-- reg:            Should contain base register location and length
-- interrupts:     Interrupt number used by this controller
-
-- clocks:         Should contain the core clock and the AHB clock.
-- clock-names:    Should be "core" for the core clock and "iface" for the
-                  AHB clock.
-
-- #address-cells: Number of cells required to define a chip select
-                  address on the SPI bus. Should be set to 1.
-- #size-cells:    Should be zero.
-
-Optional properties:
-- spi-max-frequency: Specifies maximum SPI clock frequency,
-                     Units - Hz. Definition as per
-                     Documentation/devicetree/bindings/spi/spi-bus.txt
-- num-cs:	total number of chipselects
-- cs-gpios:	should specify GPIOs used for chipselects.
-		The gpios will be referred to as reg = <index> in the SPI child
-		nodes.  If unspecified, a single SPI device without a chip
-		select can be used.
-
-- dmas:         Two DMA channel specifiers following the convention outlined
-                in bindings/dma/dma.txt
-- dma-names:    Names for the dma channels, if present. There must be at
-                least one channel named "tx" for transmit and named "rx" for
-                receive.
-
-SPI slave nodes must be children of the SPI master node and can contain
-properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Example:
-
-	spi_8: spi@f9964000 { /* BLSP2 QUP2 */
-
-		compatible = "qcom,spi-qup-v2";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xf9964000 0x1000>;
-		interrupts = <0 102 0>;
-		spi-max-frequency = <19200000>;
-
-		clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&blsp1_bam 13>, <&blsp1_bam 12>;
-		dma-names = "rx", "tx";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi8_default>;
-
-		device@0 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0>; /* Chip select 0 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-		};
-
-		device@1 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <1>; /* Chip select 1 */
-			spi-max-frequency = <9600000>;
-			spi-cpha;
-		};
-
-		device@2 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <2>; /* Chip select 2 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-			spi-cpha;
-		};
-
-		device@3 {
-			compatible = "arm,pl022-dummy";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <3>; /* Chip select 3 */
-			spi-max-frequency = <19200000>;
-			spi-cpol;
-			spi-cpha;
-			spi-cs-high;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
new file mode 100644
index 000000000000..93f14dd01afc
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The QUP core is an AHB slave that provides a common data path (an output FIFO
+  and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+  SPI in master mode supports up to 50MHz, up to four chip selects,
+  programmable data path from 4 bits to 32 bits and numerous protocol variants.
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,spi-qup-v1.1.1 # for 8660, 8960 and 8064
+      - qcom,spi-qup-v2.1.1 # for 8974 and later
+      - qcom,spi-qup-v2.2.1 # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spi@7575000 {
+        compatible = "qcom,spi-qup-v2.2.1";
+        reg = <0x07575000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_spi1_default>;
+        pinctrl-1 = <&blsp1_spi1_sleep>;
+        dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml
new file mode 100644
index 000000000000..22879f7dcb77
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/ralink,mt7621-spi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/ralink,mt7621-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+title: Mediatek MT7621/MT7628 SPI controller
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: ralink,mt7621-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: spi
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: spi
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    spi@b00 {
+      compatible = "ralink,mt7621-spi";
+      reg = <0xb00 0x100>;
+      clocks = <&sysc MT7621_CLK_SPI>;
+      clock-names = "spi";
+      resets = <&sysc MT7621_RST_SPI>;
+      reset-names = "spi";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&spi_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
index c0eccf703039..bab5d4b7fc3d 100644
--- a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -56,4 +56,3 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
     };
-
diff --git a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
index 76e6d9e52fc7..f45d3b75d6de 100644
--- a/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,rspi.yaml
@@ -21,8 +21,10 @@ properties:
           - enum:
               - renesas,rspi-r7s72100  # RZ/A1H
               - renesas,rspi-r7s9210   # RZ/A2
+              - renesas,r9a07g043-rspi # RZ/G2UL
               - renesas,r9a07g044-rspi # RZ/G2{L,LC}
-          - const: renesas,rspi-rz     # RZ/A and RZ/G2{L,LC}
+              - renesas,r9a07g054-rspi # RZ/V2L
+          - const: renesas,rspi-rz
 
       - items:
           - enum:
@@ -123,7 +125,9 @@ allOf:
           contains:
             enum:
               - renesas,qspi
+              - renesas,r9a07g043-rspi
               - renesas,r9a07g044-rspi
+              - renesas,r9a07g054-rspi
     then:
       required:
         - resets
diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
index b104899205f6..491a695a2deb 100644
--- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
+++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml
@@ -47,10 +47,16 @@ properties:
               - renesas,msiof-r8a77980      # R-Car V3H
               - renesas,msiof-r8a77990      # R-Car E3
               - renesas,msiof-r8a77995      # R-Car D3
-              - renesas,msiof-r8a779a0      # R-Car V3U
           - const: renesas,rcar-gen3-msiof  # generic R-Car Gen3 and RZ/G2
                                             # compatible device
       - items:
+          - enum:
+              - renesas,msiof-r8a779a0      # R-Car V3U
+              - renesas,msiof-r8a779f0      # R-Car S4-8
+              - renesas,msiof-r8a779g0      # R-Car V4H
+          - const: renesas,rcar-gen4-msiof  # generic R-Car Gen4
+                                            # compatible device
+      - items:
           - const: renesas,sh-msiof  # deprecated
 
   reg:
@@ -69,6 +75,12 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
   num-cs:
     description: |
       Total number of chip selects (default is 1).
@@ -124,7 +136,6 @@ properties:
     description: |
       Override the default TX fifo size.  Unit is words.  Ignored if 0.
     $ref: /schemas/types.yaml#/definitions/uint32
-    maxItems: 1
     default: 64
 
   renesas,rx-fifo-size:
@@ -132,7 +143,6 @@ properties:
     description: |
       Override the default RX fifo size.  Unit is words.  Ignored if 0.
     $ref: /schemas/types.yaml#/definitions/uint32
-    maxItems: 1
     default: 64
 
 required:
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
new file mode 100644
index 000000000000..25b1b6c12d4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  See spi-peripheral-props.yaml for more info.
+
+properties:
+  controller-data:
+    type: object
+    additionalProperties: false
+
+    properties:
+      samsung,spi-feedback-delay:
+        description: |
+          The sampling phase shift to be applied on the miso line (to account
+          for any lag in the miso line). Valid values:
+           - 0: No phase shift.
+           - 1: 90 degree phase shift sampling.
+           - 2: 180 degree phase shift sampling.
+           - 3: 270 degree phase shift sampling.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
new file mode 100644
index 000000000000..e0a465d70b0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/samsung,spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC SPI controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  All the SPI controller nodes should be represented in the aliases node using
+  the following format 'spi{n}' where n is a unique number for the alias.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450
+          - samsung,s3c6410-spi
+          - samsung,s5pv210-spi # for S5PV210 and S5PC110
+          - samsung,exynos4210-spi
+          - samsung,exynos5433-spi
+          - samsung,exynosautov9-spi
+          - tesla,fsd-spi
+      - const: samsung,exynos7-spi
+        deprecated: true
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  cs-gpios: true
+
+  dmas:
+    minItems: 2
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  no-cs-readback:
+    description:
+      The CS line is disconnected, therefore the device should not operate
+      based on CS signalling.
+    type: boolean
+
+  num-cs:
+    minimum: 1
+    maximum: 4
+    default: 1
+
+  samsung,spi-src-clk:
+    description:
+      If the spi controller includes a internal clock mux to select the clock
+      source for the spi bus clock, this property can be used to indicate the
+      clock to be used for driving the spi bus clock. If not specified, the
+      clock number 0 is used as default.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: spi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-spi
+              - samsung,exynosautov9-spi
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: spi
+            - enum:
+                - spi_busclk0
+                - spi_busclk1
+                - spi_busclk2
+                - spi_busclk3
+            - const: spi_ioclk
+    else:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: spi
+            - enum:
+                - spi_busclk0
+                - spi_busclk1
+                - spi_busclk2
+                - spi_busclk3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/clock/samsung,s2mps11.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi@14d30000 {
+        compatible = "samsung,exynos5433-spi";
+        reg = <0x14d30000 0x100>;
+        interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&pdma0 11>, <&pdma0 10>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peric CLK_PCLK_SPI1>,
+                 <&cmu_peric CLK_SCLK_SPI1>,
+                 <&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+        clock-names = "spi",
+                      "spi_busclk0",
+                      "spi_ioclk";
+        samsung,spi-src-clk = <0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&spi1_bus>;
+        num-cs = <1>;
+
+        cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+
+        audio-codec@0 {
+            compatible = "wlf,wm5110";
+            reg = <0x0>;
+            spi-max-frequency = <20000000>;
+            interrupt-parent = <&gpa0>;
+            interrupts = <4 IRQ_TYPE_NONE>;
+            clocks = <&pmu_system_controller 0>,
+                     <&s2mps13_osc S2MPS11_CLK_BT>;
+            clock-names = "mclk1", "mclk2";
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            wlf,micd-detect-debounce = <300>;
+            wlf,micd-bias-start-time = <0x1>;
+            wlf,micd-rate = <0x7>;
+            wlf,micd-dbtime = <0x2>;
+            wlf,micd-force-micbias;
+            wlf,micd-configs = <0x0 1 0>;
+            wlf,hpdet-channel = <1>;
+            wlf,gpsw = <0x1>;
+            wlf,inmode = <2 0 2 0>;
+
+            wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+            wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+            /* core supplies */
+            AVDD-supply = <&ldo18_reg>;
+            DBVDD1-supply = <&ldo18_reg>;
+            CPVDD-supply = <&ldo18_reg>;
+            DBVDD2-supply = <&ldo18_reg>;
+            DBVDD3-supply = <&ldo18_reg>;
+            SPKVDDL-supply = <&ldo18_reg>;
+            SPKVDDR-supply = <&ldo18_reg>;
+
+            controller-data {
+                samsung,spi-feedback-delay = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
index d7e08b03e204..d33b72fabc5d 100644
--- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
+++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml
@@ -61,6 +61,8 @@ properties:
           - const: snps,dw-apb-ssi
       - description: Intel Keem Bay SPI Controller
         const: intel,keembay-ssi
+      - description: Intel Thunder Bay SPI Controller
+        const: intel,thunderbay-ssi
       - description: Baikal-T1 SPI Controller
         const: baikal,bt1-ssi
       - description: Baikal-T1 System Boot SPI Controller
@@ -102,7 +104,6 @@ properties:
     const: spi
 
   reg-io-width:
-    $ref: /schemas/types.yaml#/definitions/uint32
     description: I/O register width (in bytes) implemented by this device
     default: 4
     enum: [ 2, 4 ]
@@ -124,9 +125,16 @@ properties:
 
   rx-sample-delay-ns:
     default: 0
-    description: Default value of the rx-sample-delay-ns property.
+    description: |
+      Default value of the rx-sample-delay-ns property.
       This value will be used if the property is not explicitly defined
-      for a SPI slave device. See below.
+      for a SPI slave device.
+
+      SPI Rx sample delay offset, unit is nanoseconds.
+      The delay from the default sample time before the actual sample of the
+      rxd input signal occurs. The "rx_sample_delay" is an optional feature
+      of the designware controller, and the upper limit is also subject to
+      controller configuration.
 
 patternProperties:
   "^.*@[0-9a-f]+$":
@@ -136,19 +144,6 @@ patternProperties:
         minimum: 0
         maximum: 3
 
-      spi-rx-bus-width:
-        const: 1
-
-      spi-tx-bus-width:
-        const: 1
-
-      rx-sample-delay-ns:
-        description: SPI Rx sample delay offset, unit is nanoseconds.
-          The delay from the default sample time before the actual
-          sample of the rxd input signal occurs. The "rx_sample_delay"
-          is an optional feature of the designware controller, and the
-          upper limit is also subject to controller configuration.
-
 unevaluatedProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
index 9787be21318e..64bf4e621142 100644
--- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/spi-cadence.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cadence SPI controller Device Tree Bindings
+title: Cadence SPI controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
@@ -49,6 +49,13 @@ properties:
     enum: [ 0, 1 ]
     default: 0
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 36b72518f565..01042a7f382e 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -93,9 +93,23 @@ properties:
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
+    $ref: spi-peripheral-props.yaml
 
-    allOf:
-      - $ref: spi-peripheral-props.yaml
+    properties:
+      spi-3wire:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires 3-wire mode.
+
+      spi-cpha:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires shifted clock phase (CPHA) mode.
+
+      spi-cpol:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires inverse clock polarity (CPOL) mode.
 
     required:
       - compatible
@@ -139,4 +153,11 @@ examples:
             spi-max-frequency = <100000>;
             reg = <1>;
         };
+
+        flash@2 {
+            compatible = "jedec,spi-nor";
+            spi-max-frequency = <50000000>;
+            reg = <2>, <3>;
+            stacked-memories = /bits/ 64 <0x10000000 0x10000000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
index 200c7fc7b089..f012888656ec 100644
--- a/Documentation/devicetree/bindings/spi/spi-davinci.txt
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -78,7 +78,7 @@ spi0:spi@20bf0000 {
 	interrupts			= <338>;
 	clocks				= <&clkspi>;
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32";
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
index 1d46877fe46a..8b44284d30c6 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml
@@ -19,7 +19,9 @@ properties:
           - fsl,imx7ulp-spi
           - fsl,imx8qxp-spi
       - items:
-          - const: fsl,imx8ulp-spi
+          - enum:
+              - fsl,imx8ulp-spi
+              - fsl,imx93-spi
           - const: fsl,imx7ulp-spi
   reg:
     maxItems: 1
@@ -37,6 +39,16 @@ properties:
       - const: per
       - const: ipg
 
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
   fsl,spi-only-use-cs1-sel:
     description:
       spi common code does not support use of CS signals discontinuously.
diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
deleted file mode 100644
index 2a24969159cc..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-Binding for MTK SPI controller
-
-Required properties:
-- compatible: should be one of the following.
-    - mediatek,mt2701-spi: for mt2701 platforms
-    - mediatek,mt2712-spi: for mt2712 platforms
-    - mediatek,mt6589-spi: for mt6589 platforms
-    - mediatek,mt6765-spi: for mt6765 platforms
-    - mediatek,mt7622-spi: for mt7622 platforms
-    - "mediatek,mt7629-spi", "mediatek,mt7622-spi": for mt7629 platforms
-    - mediatek,mt8135-spi: for mt8135 platforms
-    - mediatek,mt8173-spi: for mt8173 platforms
-    - mediatek,mt8183-spi: for mt8183 platforms
-    - mediatek,mt6893-spi: for mt6893 platforms
-    - "mediatek,mt8192-spi", "mediatek,mt6765-spi": for mt8192 platforms
-    - "mediatek,mt8195-spi", "mediatek,mt6765-spi": for mt8195 platforms
-    - "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms
-    - "mediatek,mt6779-spi", "mediatek,mt6765-spi": for mt6779 platforms
-
-- #address-cells: should be 1.
-
-- #size-cells: should be 0.
-
-- reg: Address and length of the register set for the device
-
-- interrupts: Should contain spi interrupt
-
-- clocks: phandles to input clocks.
-  The first should be one of the following. It's PLL.
-   -  <&clk26m>: specify parent clock 26MHZ.
-   -  <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
-				      It's the default one.
-   -  <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
-  The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
-  The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
-
-- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
-  muxes clock, and "spi-clk" for the clock gate.
-
-Optional properties:
--cs-gpios: see spi-bus.txt.
-
-- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
-  controller used. This is an array, the element value should be 0~3,
-  only required for MT8173.
-    0: specify GPIO69,70,71,72 for spi pins.
-    1: specify GPIO102,103,104,105 for spi pins.
-    2: specify GPIO128,129,130,131 for spi pins.
-    3: specify GPIO5,6,7,8 for spi pins.
-
-Example:
-
-- SoC Specific Portion:
-spi: spi@1100a000 {
-	compatible = "mediatek,mt8173-spi";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0 0x1100a000 0 0x1000>;
-	interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
-		 <&topckgen CLK_TOP_SPI_SEL>,
-		 <&pericfg CLK_PERI_SPI0>;
-	clock-names = "parent-clk", "sel-clk", "spi-clk";
-	cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
-	mediatek,pad-select = <1>, <0>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-mt7621.txt b/Documentation/devicetree/bindings/spi/spi-mt7621.txt
deleted file mode 100644
index d5baec0fa56e..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-mt7621.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Binding for MTK SPI controller (MT7621 MIPS)
-
-Required properties:
-- compatible: Should be one of the following:
-  - "ralink,mt7621-spi": for mt7621/mt7628/mt7688 platforms
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: Address and length of the register set for the device
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-
-Optional properties:
-- cs-gpios: see spi-bus.txt.
-
-Example:
-
-- SoC Specific Portion:
-spi0: spi@b00 {
-	compatible = "ralink,mt7621-spi";
-	reg = <0xb00 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	resets = <&rstctrl 18>;
-	reset-names = "spi";
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-mxic.txt b/Documentation/devicetree/bindings/spi/spi-mxic.txt
deleted file mode 100644
index 529f2dab2648..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Macronix SPI controller Device Tree Bindings
---------------------------------------------
-
-Required properties:
-- compatible: should be "mxicy,mx25f0a-spi"
-- #address-cells: should be 1
-- #size-cells: should be 0
-- reg: should contain 2 entries, one for the registers and one for the direct
-       mapping area
-- reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
-- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
-- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
-	  "send_dly_clk" clocks
-
-Example:
-
-	spi@43c30000 {
-		compatible = "mxicy,mx25f0a-spi";
-		reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>;
-		reg-names = "regs", "dirmap";
-		clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>;
-		clock-names = "send_clk", "send_dly_clk", "ps_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		flash@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <25000000>;
-			spi-tx-bus-width = <4>;
-			spi-rx-bus-width = <4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
index 283815d59e85..1b552c298277 100644
--- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NXP Flex Serial Peripheral Interface (FSPI)
 
 maintainers:
-  - Kuldeep Singh <kuldeep.singh@nxp.com>
+  - Han Xu <han.xu@nxp.com>
+  - Kuldeep Singh <singh.kuldeep87k@gmail.com>
 
 allOf:
   - $ref: "spi-controller.yaml#"
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 5dd209206e88..dca677f9e1b9 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -16,33 +16,19 @@ description:
   their own separate schema that should be referenced from here.
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Mark Brown <broonie@kernel.org>
 
 properties:
   reg:
     minItems: 1
     maxItems: 256
     items:
-      minimum: 0
-      maximum: 256
+      items:
+        - minimum: 0
+          maximum: 256
     description:
       Chip select used by the device.
 
-  spi-3wire:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires 3-wire mode.
-
-  spi-cpha:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires shifted clock phase (CPHA) mode.
-
-  spi-cpol:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires inverse clock polarity (CPOL) mode.
-
   spi-cs-high:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -70,6 +56,11 @@ properties:
     description:
       Delay, in microseconds, after a read transfer.
 
+  rx-sample-delay-ns:
+    description: SPI Rx sample delay offset, unit is nanoseconds.
+      The delay from the default sample time before the actual
+      sample of the rxd input signal occurs.
+
   spi-tx-bus-width:
     description:
       Bus width to the SPI bus used for write transfers.
@@ -82,8 +73,35 @@ properties:
     description:
       Delay, in microseconds, after a write transfer.
 
+  stacked-memories:
+    description: Several SPI memories can be wired in stacked mode.
+      This basically means that either a device features several chip
+      selects, or that different devices must be seen as a single
+      bigger chip. This basically doubles (or more) the total address
+      space with only a single additional wire, while still needing
+      to repeat the commands when crossing a chip boundary. The size of
+      each chip should be provided as members of the array.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    minItems: 2
+    maxItems: 4
+
+  parallel-memories:
+    description: Several SPI memories can be wired in parallel mode.
+      The devices are physically on a different buses but will always
+      act synchronously as each data word is spread across the
+      different memories (eg. even bits are stored in one memory, odd
+      bits in the other). This basically doubles the address space and
+      the throughput while greatly complexifying the wiring because as
+      many busses as devices must be wired. The size of each chip should
+      be provided as members of the array.
+    $ref: /schemas/types.yaml#/definitions/uint64-array
+    minItems: 2
+    maxItems: 4
+
 # The controller specific properties go here.
 allOf:
   - $ref: cdns,qspi-nor-peripheral-props.yaml#
+  - $ref: samsung,spi-peripheral-props.yaml#
+  - $ref: nvidia,tegra210-quad-peripheral-props.yaml#
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
index 6d633728fc2b..0e382119c64f 100644
--- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml
@@ -38,9 +38,7 @@ properties:
 
   clock-names:
     items:
-      - enum:
-          - SSPCLK
-          - sspclk
+      - const: sspclk
       - const: apb_pclk
 
   pl022,autosuspend-delay:
@@ -145,7 +143,7 @@ examples:
         <&dma_controller 24 0>;
       dma-names = "rx", "tx";
 
-      m25p80@1 {
+      flash@1 {
         compatible = "st,m25p80";
         reg = <1>;
         spi-max-frequency = <12000000>;
diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
index 52a78a2e362e..66e49947b703 100644
--- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml
@@ -27,6 +27,7 @@ properties:
       - items:
           - enum:
               - rockchip,px30-spi
+              - rockchip,rk3128-spi
               - rockchip,rk3188-spi
               - rockchip,rk3288-spi
               - rockchip,rk3308-spi
@@ -34,6 +35,7 @@ properties:
               - rockchip,rk3368-spi
               - rockchip,rk3399-spi
               - rockchip,rk3568-spi
+              - rockchip,rk3588-spi
               - rockchip,rv1126-spi
           - const: rockchip,rk3066-spi
 
@@ -80,6 +82,9 @@ properties:
       where the "sleep" configuration may describe the state
       the pins should be in during system suspend.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
deleted file mode 100644
index 49028a4f5df1..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ /dev/null
@@ -1,122 +0,0 @@
-* Samsung SPI Controller
-
-The Samsung SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required SoC Specific Properties:
-
-- compatible: should be one of the following.
-    - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
-    - samsung,s3c6410-spi: for s3c6410 platforms
-    - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
-    - samsung,exynos5433-spi: for exynos5433 compatible controllers
-    - samsung,exynos7-spi: for exynos7 platforms <DEPRECATED>
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
-  depends on the interrupt controller.
-
-- dmas : Two or more DMA channel specifiers following the convention outlined
-  in bindings/dma/dma.txt
-
-- dma-names: Names for the dma channels. There must be at least one channel
-  named "tx" for transmit and named "rx" for receive.
-
-- clocks: specifies the clock IDs provided to the SPI controller; they are
-  required for interacting with the controller itself, for synchronizing the bus
-  and as I/O clock (the latter is required by exynos5433 and exynos7).
-
-- clock-names: string names of the clocks in the 'clocks' property; for all the
-  the devices the names must be "spi", "spi_busclkN" (where N is determined by
-  "samsung,spi-src-clk"), while Exynos5433 should specify a third clock
-  "spi_ioclk" for the I/O clock.
-
-Required Board Specific Properties:
-
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Board Specific Properties:
-
-- samsung,spi-src-clk: If the spi controller includes a internal clock mux to
-  select the clock source for the spi bus clock, this property can be used to
-  indicate the clock to be used for driving the spi bus clock. If not specified,
-  the clock number 0 is used as default.
-
-- num-cs: Specifies the number of chip select lines supported. If
-  not specified, the default number of chip select lines is set to 1.
-
-- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt)
-
-- no-cs-readback: the CS line is disconnected, therefore the device should not
-  operate based on CS signalling.
-
-SPI Controller specific data in SPI slave nodes:
-
-- The spi slave nodes should provide the following information which is required
-  by the spi controller.
-
-  - samsung,spi-feedback-delay: The sampling phase shift to be applied on the
-    miso line (to account for any lag in the miso line). The following are the
-    valid values.
-
-      - 0: No phase shift.
-      - 1: 90 degree phase shift sampling.
-      - 2: 180 degree phase shift sampling.
-      - 3: 270 degree phase shift sampling.
-
-Aliases:
-
-- All the SPI controller nodes should be represented in the aliases node using
-  the following format 'spi{n}' where n is a unique number for the alias.
-
-
-Example:
-
-- SoC Specific Portion:
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-- Board Specific Portion:
-
-	spi_0: spi@12d20000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		cs-gpios = <&gpa2 5 0>;
-
-		w25q80bw@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <10000>;
-
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt b/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
deleted file mode 100644
index 9192724540fd..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-slave-mt27xx.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for MTK SPI Slave controller
-
-Required properties:
-- compatible: should be one of the following.
-    - mediatek,mt2712-spi-slave: for mt2712 platforms
-    - mediatek,mt8195-spi-slave: for mt8195 platforms
-- reg: Address and length of the register set for the device.
-- interrupts: Should contain spi interrupt.
-- clocks: phandles to input clocks.
-  It's clock gate, and should be <&infracfg CLK_INFRA_AO_SPI1>.
-- clock-names: should be "spi" for the clock gate.
-
-Optional properties:
-- assigned-clocks: it's mux clock, should be <&topckgen CLK_TOP_SPISLV_SEL>.
-- assigned-clock-parents: parent of mux clock.
-  It's PLL, and should be one of the following.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D2>: specify parent clock 312MHZ.
-				       It's the default one.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D4>: specify parent clock 156MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
-   -  <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
-
-Example:
-- SoC Specific Portion:
-spis1: spi@10013000 {
-	compatible = "mediatek,mt2712-spi-slave";
-	reg = <0 0x10013000 0 0x100>;
-	interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&infracfg CLK_INFRA_AO_SPI1>;
-	clock-names = "spi";
-	assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
-	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
-};
diff --git a/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
new file mode 100644
index 000000000000..3a58cf0f1ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sunplus-sp7021.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-sunplus-sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus sp7021 SPI controller
+
+allOf:
+  - $ref: "spi-controller.yaml"
+
+maintainers:
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-spi
+
+  reg:
+    items:
+      - description: the SPI master registers
+      - description: the SPI slave registers
+
+  reg-names:
+    items:
+      - const: master
+      - const: slave
+
+  interrupt-names:
+    items:
+      - const: dma_w
+      - const: master_risc
+      - const: slave_risc
+
+  interrupts:
+    minItems: 3
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - pinctrl-names
+  - pinctrl-0
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi@9C002D80 {
+        compatible = "sunplus,sp7021-spi";
+        reg = <0x9C002D80 0x80>, <0x9C002E00 0x80>;
+        reg-names = "master", "slave";
+        interrupt-parent = <&intc>;
+        interrupt-names = "dma_w",
+                          "master_risc",
+                          "slave_risc";
+        interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+                     <146 IRQ_TYPE_LEVEL_HIGH>,
+                     <145 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x32>;
+        resets = <&rstc 0x22>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pins_spi0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
index 03e5dca7e933..bbb735603f29 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/spi-xilinx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx SPI controller Device Tree Bindings
+title: Xilinx SPI controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
index ea72c8001256..6bf0edc57f4a 100644
--- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/spi/spi-zynqmp-qspi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
+title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
@@ -30,6 +30,13 @@ properties:
   clocks:
     maxItems: 2
 
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
deleted file mode 100644
index 5bb4a8f1df7a..000000000000
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Atmel SPI device
-
-Required properties:
-- compatible : should be "atmel,at91rm9200-spi" or "microchip,sam9x60-spi".
-- reg: Address and length of the register set for the device
-- interrupts: Should contain spi interrupt
-- cs-gpios: chipselects (optional for SPI controller version >= 2 with the
-  Chip Select Active After Transfer feature).
-- clock-names: tuple listing input clock names.
-	Required elements: "spi_clk"
-- clocks: phandles to input clocks.
-
-Optional properties:
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable SPI controllers.
-
-Example:
-
-spi1: spi@fffcc000 {
-	compatible = "atmel,at91rm9200-spi";
-	reg = <0xfffcc000 0x4000>;
-	interrupts = <13 4 5>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&spi1_clk>;
-	clock-names = "spi_clk";
-	cs-gpios = <&pioB 3 0>;
-	atmel,fifo-size = <32>;
-
-	mmc-slot@0 {
-		compatible = "mmc-spi-slot";
-		reg = <0>;
-		gpios = <&pioC 4 0>;	/* CD */
-		spi-max-frequency = <25000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
index fe014020da69..a3ab1a1f1eb4 100644
--- a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -44,7 +44,7 @@ description: |
   compatibility.
 
 allOf:
-  - $ref: /spi/spi-controller.yaml#
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
new file mode 100644
index 000000000000..abcbbe13723f
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek SPMI Controller
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |+
+  On MediaTek SoCs the PMIC is connected via SPMI and the controller allows
+  for multiple SoCs to control a single SPMI master.
+
+allOf:
+  - $ref: "spmi.yaml"
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6873-spmi
+      - mediatek,mt8195-spmi
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pmif
+      - const: spmimst
+
+  clocks:
+    minItems: 3
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pmif_sys_ck
+      - const: pmif_tmr_ck
+      - const: spmimst_clk_mux
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+
+    spmi: spmi@10027000 {
+        compatible = "mediatek,mt6873-spmi";
+        reg = <0x10027000 0xe00>,
+              <0x10029000 0x100>;
+        reg-names = "pmif", "spmimst";
+        clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+                 <&infracfg CLK_INFRA_PMIC_TMR>,
+                 <&topckgen CLK_TOP_SPMI_MST_SEL>;
+        clock-names = "pmif_sys_ck",
+                      "pmif_tmr_ck",
+                      "spmimst_clk_mux";
+        assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index ca645e21fe47..000000000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets.  It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
-controller binding requirements for child nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names  : must contain:
-     "core" - core registers
-     "intr" - interrupt controller registers
-     "cnfg" - configuration registers
-   Registers used only for V2 PMIC Arbiter:
-     "chnls"  - tx-channel per virtual slave registers.
-     "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
-        correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
-               single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
-                    listed in the 'interrupts' property, must contain:
-     "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
-    cell 1: slave ID for the requested interrupt (0-15)
-    cell 2: peripheral ID for requested interrupt (0-255)
-    cell 3: the requested peripheral interrupt (0-7)
-    cell 4: interrupt flags indicating level-sense information, as defined in
-            dt-bindings/interrupt-controller/irq.h
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-		reg-names = "core", "intr", "cnfg";
-		reg = <0xfc4cf000 0x1000>,
-		      <0xfc4cb000 0x1000>,
-		      <0xfc4ca000 0x1000>;
-
-		interrupt-names = "periph_irq";
-		interrupts = <0 190 0>;
-
-		qcom,ee = <0>;
-		qcom,channel = <0>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..fee4f0eb4665
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+  controller with wrapping arbitration logic to allow for multiple on-chip
+  devices to control a single SPMI master.
+
+  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+  to slave devices.
+
+allOf:
+  - $ref: spmi.yaml
+
+properties:
+  compatible:
+    const: qcom,spmi-pmic-arb
+
+  reg:
+    oneOf:
+      - items: # V1
+          - description: core registers
+          - description: interrupt controller registers
+          - description: configuration registers
+      - items: # V2
+          - description: core registers
+          - description: tx-channel per virtual slave regosters
+          - description: rx-channel (called observer) per virtual slave registers
+          - description: interrupt controller registers
+          - description: configuration registers
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: core
+          - const: intr
+          - const: cnfg
+      - items:
+          - const: core
+          - const: chnls
+          - const: obsrvr
+          - const: intr
+          - const: cnfg
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: periph_irq
+
+  interrupt-controller: true
+
+  '#address-cells': true
+
+  '#interrupt-cells':
+    const: 4
+    description: |
+      cell 1: slave ID for the requested interrupt (0-15)
+      cell 2: peripheral ID for requested interrupt (0-255)
+      cell 3: the requested peripheral interrupt (0-7)
+      cell 4: interrupt flags indicating level-sense information,
+              as defined in dt-bindings/interrupt-controller/irq.h
+
+  '#size-cells': true
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      indicates the active Execution Environment identifier
+
+  qcom,channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      which of the PMIC Arb provided channels to use for accesses
+
+required:
+  - compatible
+  - reg-names
+  - qcom,ee
+  - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spmi@fc4cf000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg-names = "core", "intr", "cnfg";
+        reg = <0xfc4cf000 0x1000>,
+              <0xfc4cb000 0x1000>,
+              <0xfc4ca000 0x1000>;
+
+        interrupt-names = "periph_irq";
+        interrupts = <0 190 0>;
+
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        interrupt-controller;
+        #interrupt-cells = <4>;
+    };
+
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
index 1d243faef2f8..c1b06fa5c631 100644
--- a/Documentation/devicetree/bindings/spmi/spmi.yaml
+++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
@@ -24,9 +24,6 @@ properties:
   $nodename:
     pattern: "^spmi@.*"
 
-  reg:
-    maxItems: 1
-
   "#address-cells":
     const: 2
 
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 1c426c211e36..98a7dc7f467d 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 System Control Device Tree Bindings
+title: Allwinner A10 System Control
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,32 +24,31 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun4i-a10-sram-controller
+      - enum:
+          - allwinner,sun4i-a10-sram-controller
+          - allwinner,sun50i-a64-sram-controller
         deprecated: true
-      - const: allwinner,sun4i-a10-system-control
-      - const: allwinner,sun5i-a13-system-control
+      - enum:
+          - allwinner,sun4i-a10-system-control
+          - allwinner,sun5i-a13-system-control
+          - allwinner,sun8i-a23-system-control
+          - allwinner,sun8i-h3-system-control
+          - allwinner,sun20i-d1-system-control
+          - allwinner,sun50i-a64-system-control
+          - allwinner,sun50i-h5-system-control
+          - allwinner,sun50i-h616-system-control
       - items:
-          - const: allwinner,sun7i-a20-system-control
+          - enum:
+              - allwinner,suniv-f1c100s-system-control
+              - allwinner,sun7i-a20-system-control
+              - allwinner,sun8i-r40-system-control
           - const: allwinner,sun4i-a10-system-control
-      - const: allwinner,sun8i-a23-system-control
-      - const: allwinner,sun8i-h3-system-control
       - items:
           - const: allwinner,sun8i-v3s-system-control
           - const: allwinner,sun8i-h3-system-control
       - items:
-          - const: allwinner,sun8i-r40-system-control
-          - const: allwinner,sun4i-a10-system-control
-      - const: allwinner,sun50i-a64-sram-controller
-        deprecated: true
-      - const: allwinner,sun50i-a64-system-control
-      - const: allwinner,sun50i-h5-system-control
-      - items:
           - const: allwinner,sun50i-h6-system-control
           - const: allwinner,sun50i-a64-system-control
-      - items:
-          - const: allwinner,suniv-f1c100s-system-control
-          - const: allwinner,sun4i-a10-system-control
-      - const: allwinner,sun50i-h616-system-control
 
   reg:
     maxItems: 1
@@ -76,43 +75,26 @@ patternProperties:
               - const: allwinner,sun4i-a10-sram-d
               - const: allwinner,sun50i-a64-sram-c
               - items:
-                  - const: allwinner,sun5i-a13-sram-a3-a4
-                  - const: allwinner,sun4i-a10-sram-a3-a4
-              - items:
-                  - const: allwinner,sun7i-a20-sram-a3-a4
+                  - enum:
+                      - allwinner,sun5i-a13-sram-a3-a4
+                      - allwinner,sun7i-a20-sram-a3-a4
                   - const: allwinner,sun4i-a10-sram-a3-a4
               - items:
-                  - const: allwinner,sun5i-a13-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun7i-a20-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun8i-a23-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun8i-h3-sram-c1
+                  - enum:
+                      - allwinner,sun5i-a13-sram-c1
+                      - allwinner,sun7i-a20-sram-c1
+                      - allwinner,sun8i-a23-sram-c1
+                      - allwinner,sun8i-h3-sram-c1
+                      - allwinner,sun8i-r40-sram-c1
+                      - allwinner,sun50i-a64-sram-c1
+                      - allwinner,sun50i-h5-sram-c1
+                      - allwinner,sun50i-h6-sram-c1
                   - const: allwinner,sun4i-a10-sram-c1
               - items:
-                  - const: allwinner,sun8i-r40-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun50i-a64-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun50i-h5-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun50i-h6-sram-c1
-                  - const: allwinner,sun4i-a10-sram-c1
-              - items:
-                  - const: allwinner,sun5i-a13-sram-d
-                  - const: allwinner,sun4i-a10-sram-d
-              - items:
-                  - const: allwinner,sun7i-a20-sram-d
-                  - const: allwinner,sun4i-a10-sram-d
-              - items:
-                  - const: allwinner,suniv-f1c100s-sram-d
+                  - enum:
+                      - allwinner,suniv-f1c100s-sram-d
+                      - allwinner,sun5i-a13-sram-d
+                      - allwinner,sun7i-a20-sram-d
                   - const: allwinner,sun4i-a10-sram-d
               - items:
                   - const: allwinner,sun50i-h6-sram-c
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
new file mode 100644
index 000000000000..e9199190198d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/qcom,imem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IMEM memory region
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm IMEM is dedicated memory region for various debug features and DMA
+  transactions.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-imem
+          - qcom,msm8974-imem
+          - qcom,qcs404-imem
+          - qcom,sc7180-imem
+          - qcom,sc7280-imem
+          - qcom,sdm630-imem
+          - qcom,sdm845-imem
+          - qcom,sdx55-imem
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
+
+patternProperties:
+  "^pil-reloc@[0-9a-f]+$":
+    $ref: /schemas/remoteproc/qcom,pil-info.yaml#
+    description: Peripheral image loader relocation region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@146bf000 {
+            compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
+            reg = <0 0x146bf000 0 0x1000>;
+            ranges = <0 0 0x146bf000 0x1000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            pil-reloc@94c {
+                compatible = "qcom,pil-reloc-info";
+                reg = <0x94c 0xc8>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 930188bc5e6a..071f2d676196 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -72,10 +72,10 @@ patternProperties:
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-      #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 
-      ocmem: ocmem@fdd00000 {
+    sram@fdd00000 {
         compatible = "qcom,msm8974-ocmem";
 
         reg = <0xfdd00000 0x2000>,
@@ -93,6 +93,6 @@ examples:
         ranges = <0 0xfec00000 0x100000>;
 
         gmu-sram@0 {
-                reg = <0x0 0x100000>;
+            reg = <0x0 0x100000>;
         };
-      };
+    };
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
index 668a9a41a775..993430be355b 100644
--- a/Documentation/devicetree/bindings/sram/sram.yaml
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -136,14 +136,14 @@ required:
   - reg
 
 if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - qcom,rpm-msg-ram
-          - rockchip,rk3288-pmu-sram
-
-else:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - qcom,rpm-msg-ram
+            - rockchip,rk3288-pmu-sram
+then:
   required:
     - "#address-cells"
     - "#size-cells"
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 6e0b110153b0..fbd4212285e2 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/thermal/allwinner,sun8i-a83t-ths.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner SUN8I Thermal Controller Device Tree Bindings
+title: Allwinner SUN8I Thermal Controller
 
 maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
index 1ab5070c751d..89a2c32c0ab2 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -16,7 +16,7 @@ description: |+
   - compatible: Should be one of the following:
                 "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"
 
-  Refer to the the bindings described in
+  Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
 properties:
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
deleted file mode 100644
index 74a9ef09db8b..000000000000
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Broadcom STB thermal management
-
-Thermal management core, provided by the AVS TMON hardware block.
-
-Required properties:
-- compatible: must be one of:
-	"brcm,avs-tmon-bcm7216"
-	"brcm,avs-tmon-bcm7445"
-	"brcm,avs-tmon"
-- reg: address range for the AVS TMON registers
-- interrupts: temperature monitor interrupt, for high/low threshold triggers,
-	      required except for "brcm,avs-tmon-bcm7216"
-- interrupt-names: should be "tmon"
-
-Example:
-
-	thermal@f04d1500 {
-		compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
-		reg = <0xf04d1500 0x28>;
-		interrupts = <0x6>;
-		interrupt-names = "tmon";
-		interrupt-parent = <&avs_host_l2_intc>;
-	};
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
new file mode 100644
index 000000000000..267a0f423504
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,avs-tmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB thermal management
+
+description: Thermal management core, provided by the AVS TMON hardware block.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,avs-tmon-bcm7216
+          - brcm,avs-tmon-bcm7445
+      - const: brcm,avs-tmon
+
+  reg:
+    maxItems: 1
+    description: >
+      Address range for the AVS TMON registers
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: tmon
+
+  "#thermal-sensor-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#thermal-sensor-cells"
+
+examples:
+  - |
+     thermal@f04d1500 {
+          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+          reg = <0xf04d1500 0x28>;
+          interrupts = <0x6>;
+          interrupt-names = "tmon";
+          interrupt-parent = <&avs_host_l2_intc>;
+          #thermal-sensor-cells = <0>;
+     };
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
deleted file mode 100644
index 33004ce7e5df..000000000000
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-* Exynos Thermal Management Unit (TMU)
-
-** Required properties:
-
-- compatible : One of the following:
-	       "samsung,exynos3250-tmu"
-	       "samsung,exynos4412-tmu"
-	       "samsung,exynos4210-tmu"
-	       "samsung,exynos5250-tmu"
-	       "samsung,exynos5260-tmu"
-	       "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
-	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
-			Exynos5420 (Must pass triminfo base and triminfo clock)
-               "samsung,exynos5433-tmu"
-	       "samsung,exynos7-tmu"
-- reg : Address range of the thermal registers. For soc's which has multiple
-	instances of TMU and some registers are shared across all TMU's like
-	interrupt related then 2 set of register has to supplied. First set
-	belongs	to register set of TMU instance and second set belongs to
-	registers shared with the TMU instance.
-
-  NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
-	channels 2, 3 and 4
-	Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
-	register, also provide clock to access that base.
-
-	TRIMINFO at 0x1006c000 contains data for TMU channel 3
-	TRIMINFO at 0x100a0000 contains data for TMU channel 4
-	TRIMINFO at 0x10068000 contains data for TMU channel 2
-
-- interrupts : Should contain interrupt for thermal system
-- clocks : The main clocks for TMU device
-	-- 1. operational clock for TMU channel
-	-- 2. optional clock to access the shared registers of TMU channel
-	-- 3. optional special clock for functional operation
-- clock-names : Thermal system clock name
-	-- "tmu_apbif" operational clock for current TMU channel
-	-- "tmu_triminfo_apbif" clock to access the shared triminfo register
-		for current TMU channel
-	-- "tmu_sclk" clock for functional operation of the current TMU
-		channel
-
-The Exynos TMU supports generating interrupts when reaching given
-temperature thresholds. Number of supported thermal trip points depends
-on the SoC (only first trip points defined in DT will be configured):
- - most of SoC: 4
- - samsung,exynos5433-tmu: 8
- - samsung,exynos7-tmu: 8
-
-** Optional properties:
-
-- vtmu-supply: This entry is optional and provides the regulator node supplying
-		voltage to TMU. If needed this entry can be placed inside
-		board/platform specific dts file.
-
-Example 1):
-
-	tmu@100c0000 {
-		compatible = "samsung,exynos4412-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock 383>;
-		clock-names = "tmu_apbif";
-		vtmu-supply = <&tmu_regulator_node>;
-		#thermal-sensor-cells = <0>;
-	};
-
-Example 2): (In case of Exynos5420 "with misplaced TRIMINFO register")
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock 318>, <&clock 318>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock 318>, <&clock 319>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock 319>, <&clock 318>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#thermal-sensor-cells = <0>;
-	};
-
-Note: For multi-instance tmu each instance should have an alias correctly
-numbered in "aliases" node.
-
-Example:
-
-aliases {
-	tmuctrl0 = &tmuctrl_0;
-	tmuctrl1 = &tmuctrl_1;
-	tmuctrl2 = &tmuctrl_2;
-};
diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
new file mode 100644
index 000000000000..f9e4b3c8d0ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/fsl,scu-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Thermal bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-thermal
+      - const: fsl,imx-sc-thermal
+
+  '#thermal-sensor-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    thermal-sensor {
+        compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
index db880e7ed713..aea4a2a178b9 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
@@ -96,7 +96,7 @@ critical trip point is reported back to the thermal framework to implement
 software shutdown.
 
 - the "hot" type trip points will be set to SOC_THERM hardware as the throttle
-temperature. Once the the temperature of this thermal zone is higher
+temperature. Once the temperature of this thermal zone is higher
 than it, it will trigger the HW throttle event.
 
 Example :
diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
new file mode 100644
index 000000000000..5f08b6e59b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPNP PMIC Temperature Alarm
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+  that utilize the Qualcomm SPMI implementation. These peripherals provide an
+  interrupt signal and status register to identify high PMIC die temperature.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: qcom,spmi-temp-alarm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: ADC channel, which reports chip die temperature
+
+  io-channel-names:
+    items:
+      - const: thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8350_temp_alarm: temperature-sensor@a00 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0xa00>;
+            interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
+
+    thermal-zones {
+        pm8350_thermal: pm8350c-thermal {
+            polling-delay-passive = <100>;
+            polling-delay = <0>;
+            thermal-sensors = <&pm8350_temp_alarm>;
+
+            trips {
+                pm8350_trip0: trip0 {
+                    temperature = <95000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                pm8350_crit: pm8350c-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
index 289e9a845600..e1587ddf7de3 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
@@ -18,7 +18,9 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sc8180x-lmh
       - qcom,sdm845-lmh
+      - qcom,sm8150-lmh
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index 3ea8c0c1f45f..feb390d50696 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -10,7 +10,9 @@ maintainers:
 
 properties:
   compatible:
-    const: qcom,spmi-adc-tm5
+    enum:
+      - qcom,spmi-adc-tm5
+      - qcom,spmi-adc-tm5-gen2
 
   reg:
     maxItems: 1
@@ -33,6 +35,7 @@ properties:
   qcom,avg-samples:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of samples to be used for measurement.
+            Not applicable for Gen2 ADC_TM peripheral.
     enum:
       - 1
       - 2
@@ -45,6 +48,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: This parameter is used to decrease ADC sampling rate.
             Quicker measurements can be made by reducing decimation ratio.
+            Not applicable for Gen2 ADC_TM peripheral.
     enum:
       - 250
       - 420
@@ -93,6 +97,29 @@ patternProperties:
           - const: 1
           - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
 
+      qcom,avg-samples:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Number of samples to be used for measurement.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 1
+          - 2
+          - 4
+          - 8
+          - 16
+        default: 1
+
+      qcom,decimation:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: This parameter is used to decrease ADC sampling rate.
+          Quicker measurements can be made by reducing decimation ratio.
+          This property in child node is applicable only for Gen2 ADC_TM peripheral.
+        enum:
+          - 85
+          - 340
+          - 1360
+        default: 1360
+
     required:
       - reg
       - io-channels
@@ -100,6 +127,31 @@ patternProperties:
     additionalProperties:
       false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5
+
+    then:
+      patternProperties:
+        "^([-a-z0-9]*)@[0-7]$":
+          properties:
+            qcom,decimation: false
+            qcom,avg-samples: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,spmi-adc-tm5-gen2
+
+    then:
+      properties:
+        qcom,avg-samples: false
+        qcom,decimation: false
+
 required:
   - compatible
   - reg
@@ -124,7 +176,7 @@ examples:
             #size-cells = <0>;
             #io-channel-cells = <1>;
 
-            /* Other propreties are omitted */
+            /* Other properties are omitted */
             conn-therm@4f {
                 reg = <ADC5_AMUX_THM3_100K_PU>;
                 qcom,ratiometric;
@@ -148,4 +200,58 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmk8350_vadc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pmk8350_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm5-gen2";
+            reg = <0x3400>;
+            interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmk8350-xo-therm@0 {
+                reg = <0>;
+                io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,decimation = <340>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+
+            conn-therm@1 {
+                reg = <1>;
+                io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>;
+                qcom,avg-samples = <2>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
deleted file mode 100644
index 2d5b2ad03314..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm QPNP PMIC Temperature Alarm
-
-QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
-that utilize the Qualcomm SPMI implementation. These peripherals provide an
-interrupt signal and status register to identify high PMIC die temperature.
-
-Required properties:
-- compatible:      Should contain "qcom,spmi-temp-alarm".
-- reg:             Specifies the SPMI address.
-- interrupts:      PMIC temperature alarm interrupt.
-- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- io-channels:     Should contain IIO channel specifier for the ADC channel,
-                   which report chip die temperature.
-- io-channel-names: Should contain "thermal".
-
-Example:
-
-	pm8941_temp: thermal-alarm@2400 {
-		compatible = "qcom,spmi-temp-alarm";
-		reg = <0x2400>;
-		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-		#thermal-sensor-cells = <0>;
-
-		io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
-		io-channel-names = "thermal";
-	};
-
-	thermal-zones {
-		pm8941 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pm8941_temp>;
-
-			trips {
-				stage1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				stage2 {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d3b9e9b600a2..038d81338fcf 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,10 +19,11 @@ description: |
 properties:
   compatible:
     oneOf:
-      - description: msm9860 TSENS based
+      - description: msm8960 TSENS based
         items:
           - enum:
               - qcom,ipq8064-tsens
+              - qcom,msm8960-tsens
 
       - description: v0.1 of TSENS
         items:
@@ -43,13 +44,16 @@ properties:
       - description: v2 of TSENS
         items:
           - enum:
+              - qcom,msm8953-tsens
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sc7180-tsens
               - qcom,sc7280-tsens
               - qcom,sc8180x-tsens
+              - qcom,sc8280xp-tsens
               - qcom,sdm630-tsens
               - qcom,sdm845-tsens
+              - qcom,sm6350-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
               - qcom,sm8350-tsens
@@ -115,6 +119,7 @@ allOf:
               - qcom,ipq8064-tsens
               - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
+              - qcom,msm8960-tsens
               - qcom,msm8974-tsens
               - qcom,msm8976-tsens
               - qcom,qcs404-tsens
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index f963204e0b16..0f05f5c886c5 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -8,9 +8,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Renesas R-Car Gen3 Thermal Sensor
 
 description:
-  On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
-  sensors (THS) which are the analog circuits for measuring temperature (Tj)
-  inside the LSI.
+  On most R-Car Gen3 and later SoCs, the thermal sensor controllers (TSC)
+  control the thermal sensors (THS) which are the analog circuits for
+  measuring temperature (Tj) inside the LSI.
 
 maintainers:
   - Niklas Söderlund <niklas.soderlund@ragnatech.se>
@@ -27,6 +27,7 @@ properties:
       - renesas,r8a77965-thermal # R-Car M3-N
       - renesas,r8a77980-thermal # R-Car V3H
       - renesas,r8a779a0-thermal # R-Car V3U
+      - renesas,r8a779f0-thermal # R-Car S4-8
 
   reg: true
 
@@ -57,32 +58,38 @@ required:
   - "#thermal-sensor-cells"
 
 if:
-  not:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - renesas,r8a779a0-thermal
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r8a779a0-thermal
 then:
   properties:
     reg:
-      minItems: 2
-      maxItems: 3
       items:
+        - description: TSC0 registers
         - description: TSC1 registers
         - description: TSC2 registers
         - description: TSC3 registers
-  required:
-    - interrupts
+        - description: TSC4 registers
 else:
   properties:
     reg:
+      minItems: 2
       items:
-        - description: TSC0 registers
         - description: TSC1 registers
         - description: TSC2 registers
         - description: TSC3 registers
-        - description: TSC4 registers
+  if:
+    not:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r8a779f0-thermal
+  then:
+    required:
+      - interrupts
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index 927de79ab4b5..119998d10ff4 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -42,7 +42,7 @@ properties:
     description:
       Address ranges of the thermal registers. If more then one range is given
       the first one must be the common registers followed by each sensor
-      according the the datasheet.
+      according to the datasheet.
     minItems: 1
     maxItems: 4
 
diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
index ccab9511a042..1d8373397848 100644
--- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -17,7 +17,9 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-tsu # RZ/G2UL
           - renesas,r9a07g044-tsu # RZ/G2{L,LC}
+          - renesas,r9a07g054-tsu # RZ/V2L
       - const: renesas,rzg2l-tsu
 
   reg:
diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
new file mode 100644
index 000000000000..1344df708e2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/samsung,exynos-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Thermal Management Unit (TMU)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  For multi-instance tmu each instance should have an alias correctly numbered
+  in "aliases" node.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos3250-tmu
+      - samsung,exynos4412-tmu
+      - samsung,exynos4210-tmu
+      - samsung,exynos5250-tmu
+      - samsung,exynos5260-tmu
+        # For TMU channel 0, 1 on Exynos5420:
+      - samsung,exynos5420-tmu
+        # For TMU channels 2, 3 and 4 of Exynos5420:
+      - samsung,exynos5420-tmu-ext-triminfo
+      - samsung,exynos5433-tmu
+      - samsung,exynos7-tmu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    description: |
+      The Exynos TMU supports generating interrupts when reaching given
+      temperature thresholds. Number of supported thermal trip points depends
+      on the SoC (only first trip points defined in DT will be configured)::
+       - most of SoC: 4
+       - samsung,exynos5433-tmu: 8
+       - samsung,exynos7-tmu: 8
+    maxItems: 1
+
+  reg:
+    items:
+      - description: TMU instance registers.
+      - description: |
+          Shared TMU registers.
+
+          Note:: On Exynos5420, the TRIMINFO register is misplaced for TMU
+          channels 2, 3 and 4 Use "samsung,exynos5420-tmu-ext-triminfo" in
+          cases, there is a misplaced register, also provide clock to access
+          that base.
+          TRIMINFO at 0x1006c000 contains data for TMU channel 3
+          TRIMINFO at 0x100a0000 contains data for TMU channel 4
+          TRIMINFO at 0x10068000 contains data for TMU channel 2
+    minItems: 1
+
+  '#thermal-sensor-cells': true
+
+  vtmu-supply:
+    description: The regulator node supplying voltage to TMU.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-tmu-ext-triminfo
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional clock to access the shared registers (e.g. TRIMINFO) of TMU
+                channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_triminfo_apbif
+        reg:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-tmu
+              - samsung,exynos7-tmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description:
+                Operational clock for TMU channel.
+            - description:
+                Optional special clock for functional operation of TMU channel.
+        clock-names:
+          items:
+            - const: tmu_apbif
+            - const: tmu_sclk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-tmu
+              - samsung,exynos4412-tmu
+              - samsung,exynos4210-tmu
+              - samsung,exynos5250-tmu
+              - samsung,exynos5260-tmu
+              - samsung,exynos5420-tmu
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    tmu@100c0000 {
+        compatible = "samsung,exynos4412-tmu";
+        reg = <0x100C0000 0x100>;
+        interrupt-parent = <&combiner>;
+        interrupts = <2 4>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock CLK_TMU_APBIF>;
+        clock-names = "tmu_apbif";
+        vtmu-supply = <&ldo10_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10068000 {
+        compatible = "samsung,exynos5420-tmu-ext-triminfo";
+        reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&clock 318>, <&clock 318>; /* CLK_TMU */
+        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+        vtmu-supply = <&ldo7_reg>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tmu@10060000 {
+        compatible = "samsung,exynos5433-tmu";
+        reg = <0x10060000 0x200>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        #thermal-sensor-cells = <0>;
+        clocks = <&cmu_peris 3>, /* CLK_PCLK_TMU0_APBIF */
+                 <&cmu_peris 35>; /* CLK_SCLK_TMU0 */
+        clock-names = "tmu_apbif", "tmu_sclk";
+        vtmu-supply = <&ldo3_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
index f004779ba9b3..850a9841b110 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
@@ -66,9 +66,9 @@ examples:
                     compatible = "qcom,kryo385";
                     reg = <0x0 0x0>;
                     enable-method = "psci";
-                    cpu-idle-states = <&LITTLE_CPU_SLEEP_0
-                                       &LITTLE_CPU_SLEEP_1
-                                       &CLUSTER_SLEEP_0>;
+                    cpu-idle-states = <&LITTLE_CPU_SLEEP_0>,
+                                      <&LITTLE_CPU_SLEEP_1>,
+                                      <&CLUSTER_SLEEP_0>;
                     capacity-dmips-mhz = <607>;
                     dynamic-power-coefficient = <100>;
                     qcom,freq-domain = <&cpufreq_hw 0>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
index 6278ccf16f3f..cc938d7ad1f3 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml
@@ -37,8 +37,8 @@ properties:
 
   exit-latency-us:
     description: |
-      The exit latency constraint in microsecond for the injected idle state 
-      for the device. It is the latency constraint to apply when selecting an 
+      The exit latency constraint in microsecond for the injected idle state
+      for the device. It is the latency constraint to apply when selecting an
       idle state from among all the present ones.
 
 required:
@@ -65,7 +65,7 @@ examples:
                          capacity-dmips-mhz = <1024>;
                          dynamic-power-coefficient = <436>;
                          #cooling-cells = <2>; /* min followed by max */
-                         cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+                         cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
                          thermal-idle {
                                  #cooling-cells = <2>;
                                  duration-us = <10000>;
@@ -81,7 +81,7 @@ examples:
                         capacity-dmips-mhz = <1024>;
                         dynamic-power-coefficient = <436>;
                         #cooling-cells = <2>; /* min followed by max */
-                        cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+                        cpu-idle-states = <&CPU_SLEEP>, <&CLUSTER_SLEEP>;
                         thermal-idle {
                                 #cooling-cells = <2>;
                                 duration-us = <10000>;
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index a07de5ed0ca6..8d2c6d74b605 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
@@ -215,6 +214,7 @@ patternProperties:
       - polling-delay
       - polling-delay-passive
       - thermal-sensors
+      - trips
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
new file mode 100644
index 000000000000..c74f124ebfc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J72XX VTM (DTS) binding
+
+maintainers:
+  - Keerthy <j-keerthy@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-vtm
+      - ti,j7200-vtm
+
+  reg:
+    items:
+      - description: VTM cfg1 register space
+      - description: VTM cfg2 register space
+      - description: VTM efuse register space
+
+  power-domains:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    wkup_vtm0: thermal-sensor@42040000 {
+        compatible = "ti,j721e-vtm";
+        reg = <0x42040000 0x350>,
+              <0x42050000 0x350>,
+              <0x43000300 0x10>;
+        power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+        #thermal-sensor-cells = <1>;
+    };
+
+    mpu_thermal: mpu-thermal {
+        polling-delay-passive = <250>; /* milliseconds */
+        polling-delay = <500>; /* milliseconds */
+        thermal-sensors = <&wkup_vtm0 0>;
+
+        trips {
+            mpu_crit: mpu-crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
index 53fd24bdc34e..b3538fac1ad2 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/allwinner,sun4i-a10-timer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Timer Device Tree Bindings
+title: Allwinner A10 Timer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,6 +20,7 @@ properties:
           - allwinner,suniv-f1c100s-timer
       - items:
           - enum:
+              - allwinner,sun20i-d1-timer
               - allwinner,sun50i-a64-timer
               - allwinner,sun50i-h6-timer
               - allwinner,sun50i-h616-timer
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
index 2ecac754e1cd..f1853daec2f9 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/allwinner,sun5i-a13-hstimer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 High-Speed Timer Device Tree Bindings
+title: Allwinner A13 High-Speed Timer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt b/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt
deleted file mode 100644
index 4c9ea5989e35..000000000000
--- a/Documentation/devicetree/bindings/timer/andestech,atcpit100-timer.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Andestech ATCPIT100 timer
-------------------------------------------------------------------
-ATCPIT100 is a generic IP block from Andes Technology, embedded in
-Andestech AE3XX platforms and other designs.
-
-This timer is a set of compact multi-function timers, which can be
-used as pulse width modulators (PWM) as well as simple timers.
-
-It supports up to 4 PIT channels. Each PIT channel is a
-multi-function timer and provide the following usage scenarios:
-One 32-bit timer
-Two 16-bit timers
-Four 8-bit timers
-One 16-bit PWM
-One 16-bit timer and one 8-bit PWM
-Two 8-bit timer and one 8-bit PWM
-
-Required properties:
-- compatible	: Should be "andestech,atcpit100"
-- reg		: Address and length of the register set
-- interrupts	: Reference to the timer interrupt
-- clocks 	: a clock to provide the tick rate for "andestech,atcpit100"
-- clock-names 	: should be "PCLK" for the peripheral clock source.
-
-Examples:
-
-timer0: timer@f0400000 {
-	compatible = "andestech,atcpit100";
-	reg = <0xf0400000 0x1000>;
-	interrupts = <2>;
-	clocks = <&apb>;
-	clock-names = "PCLK";
-};
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index df8ce87fd54b..c5fc3b6c8bd0 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -22,16 +22,15 @@ properties:
   compatible:
     oneOf:
       - items:
-          - enum:
-              - arm,cortex-a15-timer
-          - enum:
-              - arm,armv7-timer
+          - const: arm,cortex-a15-timer
+          - const: arm,armv7-timer
       - items:
           - enum:
               - arm,armv7-timer
-      - items:
-          - enum:
               - arm,armv8-timer
+      - items:
+          - const: arm,armv8-timer
+          - const: arm,armv7-timer
 
   interrupts:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index cd2176cad53a..f6efa48c4256 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -62,6 +62,7 @@ properties:
 patternProperties:
   '^frame@[0-9a-z]*$':
     type: object
+    additionalProperties: false
     description: A timer node has up to 8 frame sub-nodes, each with the following properties.
     properties:
       frame-number:
diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt
deleted file mode 100644
index 7cf4a24601eb..000000000000
--- a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* ARMv7M System Timer
-
-ARMv7-M includes a system timer, known as SysTick. Current driver only
-implements the clocksource feature.
-
-Required properties:
-- compatible	  : Should be "arm,armv7m-systick"
-- reg		  : The address range of the timer
-
-Required clocking property, have to be one of:
-- clocks	  : The input clock of the timer
-- clock-frequency : The rate in HZ in input of the ARM SysTick
-
-Examples:
-
-systick: timer@e000e010 {
-	compatible = "arm,armv7m-systick";
-	reg = <0xe000e010 0x10>;
-	clocks = <&clk_systick>;
-};
-
-systick: timer@e000e010 {
-	compatible = "arm,armv7m-systick";
-	reg = <0xe000e010 0x10>;
-	clock-frequency = <90000000>;
-};
diff --git a/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml
new file mode 100644
index 000000000000..2bcade5d8ac6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/arm,armv7m-systick.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/arm,armv7m-systick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARMv7M System Timer
+
+maintainers:
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+description: ARMv7-M includes a system timer, known as SysTick.
+
+properties:
+  compatible:
+    const: arm,armv7m-systick
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+oneOf:
+  - required:
+      - clocks
+  - required:
+      - clock-frequency
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@e000e010 {
+        compatible = "arm,armv7m-systick";
+        reg = <0xe000e010 0x10>;
+        clocks = <&clk_systick>;
+    };
+
+  - |
+    timer@e000e010 {
+        compatible = "arm,armv7m-systick";
+        reg = <0xe000e010 0x10>;
+        clock-frequency = <90000000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
index 8615353f69b4..7d821fd480f6 100644
--- a/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
+++ b/Documentation/devicetree/bindings/timer/cdns,ttc.yaml
@@ -17,7 +17,6 @@ properties:
     maxItems: 1
 
   interrupts:
-    minItems: 3
     maxItems: 3
     description: |
       A list of 3 interrupts; one per timer channel.
@@ -25,6 +24,9 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   timer-width:
     $ref: "/schemas/types.yaml#/definitions/uint32"
     description: |
diff --git a/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
new file mode 100644
index 000000000000..d33d90f44d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/hpe,gxp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Timer
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    const: hpe,gxp-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: iop
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@c0000000 {
+        compatible = "hpe,gxp-timer";
+        reg = <0x80 0x16>;
+        interrupts = <0>;
+        interrupt-parent = <&vic0>;
+        clocks = <&iopclk>;
+        clock-names = "iop";
+    };
diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
index 7fb37eae9da7..a84fef0fe628 100644
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
+++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.yaml
@@ -113,7 +113,9 @@ properties:
 patternProperties:
   "^watchdog@[a-f0-9]+$":
     type: object
-    $ref: ../watchdog/watchdog.yaml#
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+
     properties:
       compatible:
         oneOf:
@@ -145,13 +147,16 @@ patternProperties:
 
   "^pwm@[a-f0-9]+$":
     type: object
-    $ref: ../pwm/pwm.yaml#
+    $ref: /schemas/pwm/pwm.yaml#
+    unevaluatedProperties: false
+
     properties:
       compatible:
         oneOf:
           - enum:
               - ingenic,jz4740-pwm
               - ingenic,jz4725b-pwm
+              - ingenic,x1000-pwm
           - items:
               - enum:
                   - ingenic,jz4760-pwm
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index e5c57d6e0186..8bbb6e94508b 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -1,7 +1,8 @@
 MediaTek Timers
 ---------------
 
-MediaTek SoCs have two different timers on different platforms,
+MediaTek SoCs have different timers on different platforms,
+- CPUX (ARM/ARM64 System Timer)
 - GPT (General Purpose Timer)
 - SYST (System Timer)
 
@@ -12,6 +13,7 @@ Required properties:
 	For those SoCs that use GPT
 	* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
 	* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
+	* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
 	* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
 	* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
 	* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)
@@ -22,11 +24,16 @@ Required properties:
 
 	For those SoCs that use SYST
 	* "mediatek,mt8183-timer" for MT8183 compatible timers (SYST)
+	* "mediatek,mt8186-timer" for MT8186 compatible timers (SYST)
+	* "mediatek,mt8188-timer" for MT8188 compatible timers (SYST)
 	* "mediatek,mt8192-timer" for MT8192 compatible timers (SYST)
 	* "mediatek,mt8195-timer" for MT8195 compatible timers (SYST)
 	* "mediatek,mt7629-timer" for MT7629 compatible timers (SYST)
 	* "mediatek,mt6765-timer" for MT6765 and all above compatible timers (SYST)
 
+	For those SoCs that use CPUX
+	* "mediatek,mt6795-systimer" for MT6795 compatible timers (CPUX)
+
 - reg: Should contain location and length for timer register.
 - clocks: Should contain system clock.
 
diff --git a/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml b/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml
new file mode 100644
index 000000000000..f118ca423e38
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mstar,msc313e-timer.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mstar,msc313e-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mstar MSC313e Timer
+
+maintainers:
+  - Daniel Palmer <daniel@0x0f.com>
+  - Romain Perier <romain.perier@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - mstar,msc313e-timer
+      - sstar,ssd20xd-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@6040 {
+        compatible = "mstar,msc313e-timer";
+        reg = <0x6040 0x40>;
+        clocks = <&xtal_div2>;
+        interrupts-extended = <&intc_fiq GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
deleted file mode 100644
index ac3a5e887455..000000000000
--- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Nuvoton NPCM7xx timer
-
-Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit
-timer counters.
-
-Required properties:
-- compatible      : "nuvoton,npcm750-timer" for Poleg NPCM750, or
-                    "nuvoton,wpcm450-timer" for Hermon WPCM450.
-- reg             : Offset and length of the register set for the device.
-- interrupts      : Contain the timer interrupt of timer 0.
-- clocks          : phandle of timer reference clock (usually a 25 MHz clock).
-
-Example:
-
-timer@f0008000 {
-    compatible = "nuvoton,npcm750-timer";
-    interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-    reg = <0xf0008000 0x50>;
-    clocks = <&clk NPCM7XX_CLK_TIMER>;
-};
-
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
new file mode 100644
index 000000000000..737af78ad70c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nuvoton,npcm7xx-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM7xx timer
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,wpcm450-timer  # for Hermon WPCM450
+      - nuvoton,npcm750-timer  # for Poleg NPCM750
+      - nuvoton,npcm845-timer  # for Arbel NPCM845
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: The timer interrupt of timer 0
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    timer@f0008000 {
+        compatible = "nuvoton,npcm750-timer";
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        reg = <0xf0008000 0x50>;
+        clocks = <&clk NPCM7XX_CLK_TIMER>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
new file mode 100644
index 000000000000..b78209cd0f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra timer
+
+maintainers:
+  - Stephen Warren <swarren@nvidia.com>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 14 individual interrupts
+          minItems: 1
+          maxItems: 14
+          description: >
+            A list of 14 interrupts; one per each timer channels 0 through 13
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - items:
+                - enum:
+                    - nvidia,tegra114-timer
+                    - nvidia,tegra124-timer
+                    - nvidia,tegra132-timer
+                - const: nvidia,tegra30-timer
+            - items:
+                - const: nvidia,tegra30-timer
+                - const: nvidia,tegra20-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 6 individual interrupts
+          minItems: 1
+          maxItems: 6
+          description: >
+            A list of 6 interrupts; one per each of timer channels 1 through 5,
+            and one for the shared interrupt for the remaining channels.
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra20-timer
+    then:
+      properties:
+        interrupts:
+          # Either a single combined interrupt or up to 4 individual interrupts
+          minItems: 1
+          maxItems: 4
+          description: |
+            A list of 4 interrupts; one per timer channel.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-timer
+        description: >
+          The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+          timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+          from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+          (TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+          or watchdog interrupts.
+      - items:
+          - enum:
+              - nvidia,tegra114-timer
+              - nvidia,tegra124-timer
+              - nvidia,tegra132-timer
+          - const: nvidia,tegra30-timer
+      - items:
+          - const: nvidia,tegra30-timer
+          - const: nvidia,tegra20-timer
+        description: >
+          The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
+          running counter, and 5 watchdog modules. The first two channels may also
+          trigger a legacy watchdog reset.
+      - const: nvidia,tegra20-timer
+        description: >
+          The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
+          running counter. The first two channels may also trigger a watchdog reset.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: timer
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    timer@60005000 {
+        compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+        reg = <0x60005000 0x400>;
+        interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 122 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car 214>;
+    };
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@60005000 {
+        compatible = "nvidia,tegra210-timer";
+        reg = <0x60005000 0x400>;
+        interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+        clock-names = "timer";
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
new file mode 100644
index 000000000000..db8b5595540f
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra186 timer
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+
+description: >
+  The Tegra timer provides 29-bit timer counters and a 32-bit timestamp
+  counter. Each NV timer selects its timing reference signal from the 1 MHz
+  reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
+  programmed to generate one-shot, periodic, or watchdog interrupts.
+
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-timer
+        description: >
+          The Tegra186 timer provides ten 29-bit timer counters.
+      - const: nvidia,tegra234-timer
+        description: >
+          The Tegra234 timer provides sixteen 29-bit timer counters.
+
+  reg:
+    maxItems: 1
+
+  interrupts: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 10
+          description: >
+            One per each timer channels 0 through 9.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra234-timer
+    then:
+      properties:
+        interrupts:
+          maxItems: 16
+          description: >
+            One per each timer channels 0 through 15.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@3010000 {
+        compatible = "nvidia,tegra186-timer";
+        reg = <0x03010000 0x000e0000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@2080000 {
+        compatible = "nvidia,tegra234-timer";
+        reg = <0x02080000 0x00121000>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
deleted file mode 100644
index 4a864bd10d3d..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra20-timer.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-NVIDIA Tegra20 timer
-
-The Tegra20 timer provides four 29-bit timer channels and a single 32-bit free
-running counter. The first two channels may also trigger a watchdog reset.
-
-Required properties:
-
-- compatible : should be "nvidia,tegra20-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 4 interrupts; one per timer channel.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-Example:
-
-timer {
-	compatible = "nvidia,tegra20-timer";
-	reg = <0x60005000 0x60>;
-	interrupts = <0 0 0x04
-			0 1 0x04
-			0 41 0x04
-			0 42 0x04>;
-	clocks = <&tegra_car 132>;
-};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
deleted file mode 100644
index 032cda96fe0d..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-NVIDIA Tegra210 timer
-
-The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
-timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
-from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
-(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
-or watchdog interrupts.
-
-Required properties:
-- compatible : "nvidia,tegra210-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 14 interrupts; one per each timer channels 0 through
-  13.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-timer@60005000 {
-	compatible = "nvidia,tegra210-timer";
-	reg = <0x0 0x60005000 0x0 0x400>;
-	interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_TIMER>;
-	clock-names = "timer";
-};
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
deleted file mode 100644
index 1761f53ee36f..000000000000
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NVIDIA Tegra30 timer
-
-The Tegra30 timer provides ten 29-bit timer channels, a single 32-bit free
-running counter, and 5 watchdog modules. The first two channels may also
-trigger a legacy watchdog reset.
-
-Required properties:
-
-- compatible : For Tegra30, must contain "nvidia,tegra30-timer".  Otherwise,
-  must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
-  <chip> is tegra124 or tegra132.
-- reg : Specifies base physical address and size of the registers.
-- interrupts : A list of 6 interrupts; one per each of timer channels 1
-    through 5, and one for the shared interrupt for the remaining channels.
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-
-timer {
-	compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
-	reg = <0x60005000 0x400>;
-	interrupts = <0 0 0x04
-		      0 1 0x04
-		      0 41 0x04
-		      0 42 0x04
-		      0 121 0x04
-		      0 122 0x04>;
-	clocks = <&tegra_car 214>;
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
index 830211c55b4a..2b9653dafab8 100644
--- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -32,6 +32,10 @@ properties:
   clock-names:
     const: per
 
+  nxp,no-divider:
+    description: if present, means there is no internal base clk divider.
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
index edd9585f6726..f69773a8e4b9 100644
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -19,7 +19,11 @@ description: |
 
 properties:
   compatible:
-    const: fsl,imx7ulp-tpm
+    oneOf:
+      - const: fsl,imx7ulp-tpm
+      - items:
+          - const: fsl,imx8ulp-tpm
+          - const: fsl,imx7ulp-tpm
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
deleted file mode 100644
index 4db542c9a0fd..000000000000
--- a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-RDA Micro RDA8810PL Timer
-
-Required properties:
-- compatible      :  "rda,8810pl-timer"
-- reg             :  Offset and length of the register set for the device.
-- interrupts      :  Should contain two interrupts.
-- interrupt-names :  Should be "hwtimer", "ostimer".
-
-Example:
-
-		apb@20900000 {
-			compatible = "simple-bus";
-			...
-			timer@10000 {
-				compatible = "rda,8810pl-timer";
-				reg = <0x10000 0x1000>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
-					     <17 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "hwtimer", "ostimer";
-			};
diff --git a/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
new file mode 100644
index 000000000000..f9043a4488d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rda,8810pl-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL Timer
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    const: rda,8810pl-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hwtimer
+      - const: ostimer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    timer@20910000 {
+      compatible = "rda,8810pl-timer";
+      reg = <0x20910000 0x1000>;
+      interrupts = <16 IRQ_TYPE_LEVEL_HIGH>,
+                   <17 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hwtimer", "ostimer";
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt b/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt
deleted file mode 100644
index e8792447a199..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas H8/300 16bit timer
-
-The 16bit timer is a 16bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-Required Properties:
-
-  - compatible: must contain "renesas,16bit-timer"
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, IMIA
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "peripheral_clk" for the functional clock.
-  - renesas,channel: timer channel number.
-
-Example:
-
-	timer16: timer@ffff68 {
-		compatible = "reneas,16bit-timer";
-		reg = <0xffff68 8>, <0xffff60 8>;
-		interrupts = <24>;
-		renesas,channel = <0>;
-		clocks = <&pclk>;
-		clock-names = "peripheral_clk";
-	};
-
diff --git a/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt b/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt
deleted file mode 100644
index 9dca3759a0f0..000000000000
--- a/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas H8/300 8bit timer
-
-The 8bit timer is a 8bit timer/counter with configurable clock inputs and
-programmable compare match.
-
-This implement only supported cascade mode.
-
-Required Properties:
-
-  - compatible: must contain "renesas,8bit-timer"
-  - reg: base address and length of the registers block for the timer module.
-  - interrupts: interrupt-specifier for the timer, CMIA and TOVI
-  - clocks: a list of phandle, one for each entry in clock-names.
-  - clock-names: must contain "fck" for the functional clock.
-
-Example:
-
-	timer8_0: timer@ffff80 {
-		compatible = "renesas,8bit-timer";
-		reg = <0xffff80 10>;
-		interrupts = <36>;
-		clocks = <&fclk>;
-		clock-names = "fck";
-	};
-
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
index 53dd6d9f518f..bde6c9b66bf4 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.yaml
@@ -80,7 +80,6 @@ properties:
               - renesas,r8a77980-cmt0     # 32-bit CMT0 on R-Car V3H
               - renesas,r8a77990-cmt0     # 32-bit CMT0 on R-Car E3
               - renesas,r8a77995-cmt0     # 32-bit CMT0 on R-Car D3
-              - renesas,r8a779a0-cmt0     # 32-bit CMT0 on R-Car V3U
           - const: renesas,rcar-gen3-cmt0 # 32-bit CMT0 on R-Car Gen3 and RZ/G2
 
       - items:
@@ -97,9 +96,20 @@ properties:
               - renesas,r8a77980-cmt1     # 48-bit CMT on R-Car V3H
               - renesas,r8a77990-cmt1     # 48-bit CMT on R-Car E3
               - renesas,r8a77995-cmt1     # 48-bit CMT on R-Car D3
-              - renesas,r8a779a0-cmt1     # 48-bit CMT on R-Car V3U
           - const: renesas,rcar-gen3-cmt1 # 48-bit CMT on R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,r8a779a0-cmt0     # 32-bit CMT0 on R-Car V3U
+              - renesas,r8a779f0-cmt0     # 32-bit CMT0 on R-Car S4-8
+          - const: renesas,rcar-gen4-cmt0 # 32-bit CMT0 on R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,r8a779a0-cmt1     # 48-bit CMT on R-Car V3U
+              - renesas,r8a779f0-cmt1     # 48-bit CMT on R-Car S4-8
+          - const: renesas,rcar-gen4-cmt1 # 48-bit CMT on R-Car Gen4
+
   reg:
     maxItems: 1
 
@@ -135,6 +145,7 @@ allOf:
             enum:
               - renesas,rcar-gen2-cmt0
               - renesas,rcar-gen3-cmt0
+              - renesas,rcar-gen4-cmt0
     then:
       properties:
         interrupts:
@@ -148,6 +159,7 @@ allOf:
             enum:
               - renesas,rcar-gen2-cmt1
               - renesas,rcar-gen3-cmt1
+              - renesas,rcar-gen4-cmt1
     then:
       properties:
         interrupts:
diff --git a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
index 600d47ab7d58..7207929e5cd6 100644
--- a/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,ostm.yaml
@@ -21,9 +21,12 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r7s72100-ostm # RZ/A1H
-          - renesas,r7s9210-ostm  # RZ/A2M
-      - const: renesas,ostm       # Generic
+          - renesas,r7s72100-ostm  # RZ/A1H
+          - renesas,r7s9210-ostm   # RZ/A2M
+          - renesas,r9a07g043-ostm # RZ/G2UL
+          - renesas,r9a07g044-ostm # RZ/G2{L,LC}
+          - renesas,r9a07g054-ostm # RZ/V2L
+      - const: renesas,ostm        # Generic
 
   reg:
     maxItems: 1
@@ -37,6 +40,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -44,6 +50,18 @@ required:
   - clocks
   - power-domains
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a07g043-ostm
+          - renesas,r9a07g044-ostm
+          - renesas,r9a07g054-ostm
+then:
+  required:
+    - resets
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
index c57169118b68..60f4c059bcff 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.yaml
@@ -37,6 +37,7 @@ properties:
           - renesas,tmu-r8a77990 # R-Car E3
           - renesas,tmu-r8a77995 # R-Car D3
           - renesas,tmu-r8a779a0 # R-Car V3U
+          - renesas,tmu-r8a779f0 # R-Car S4-8
       - const: renesas,tmu
 
   reg:
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
index e26ecb5893ae..dc3bc1e62fe9 100644
--- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/timer/rockchip,rk-timer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip Timer Device Tree Bindings
+title: Rockchip Timer
 
 maintainers:
   - Daniel Lezcano <daniel.lezcano@linaro.org>
@@ -18,7 +18,6 @@ properties:
           - enum:
               - rockchip,rv1108-timer
               - rockchip,rk3036-timer
-              - rockchip,rk3066-timer
               - rockchip,rk3188-timer
               - rockchip,rk3228-timer
               - rockchip,rk3229-timer
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index f11cbc7ccc14..829bd2227f7c 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -19,22 +19,46 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos4210-mct
-      - samsung,exynos4412-mct
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mct
+          - samsung,exynos4412-mct
+      - items:
+          - enum:
+              - axis,artpec8-mct
+              - samsung,exynos3250-mct
+              - samsung,exynos5250-mct
+              - samsung,exynos5260-mct
+              - samsung,exynos5420-mct
+              - samsung,exynos5433-mct
+              - samsung,exynos850-mct
+              - tesla,fsd-mct
+          - const: samsung,exynos4210-mct
 
   clocks:
-    minItems: 2
     maxItems: 2
 
   clock-names:
     items:
-      - pattern: "^(fin_pll|mct)$"
-      - pattern: "^(fin_pll|mct)$"
+      - const: fin_pll
+      - const: mct
 
   reg:
     maxItems: 1
 
+  samsung,frc-shared:
+    type: boolean
+    description: |
+      Indicates that the hardware requires that this processor share the
+      free-running counter with a different (main) processor.
+
+  samsung,local-timers:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    description: |
+      List of indices of local timers usable from this processor.
+
   interrupts:
     description: |
       Interrupts should be put in specific order. This is, the local timer
@@ -63,6 +87,68 @@ required:
   - interrupts
   - reg
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - axis,artpec8-mct
+    then:
+      properties:
+        samsung,local-timers: false
+        samsung,frc-shared: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - axis,artpec8-mct
+              - samsung,exynos5260-mct
+              - samsung,exynos5420-mct
+              - samsung,exynos5433-mct
+              - samsung,exynos850-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 12
+          maxItems: 12
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - tesla,fsd-mct
+    then:
+      properties:
+        interrupts:
+          minItems: 16
+          maxItems: 16
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
index 8d5f4687add9..bbad24165837 100644
--- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml
+++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml
@@ -22,12 +22,18 @@ description:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-clint
-          - starfive,jh7100-clint
-          - canaan,k210-clint
-      - const: sifive,clint0
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu540-c000-clint
+              - starfive,jh7100-clint
+              - canaan,k210-clint
+          - const: sifive,clint0
+      - items:
+          - const: sifive,clint0
+          - const: riscv,clint0
+        deprecated: true
+        description: For the QEMU virt machine only
 
     description:
       Should be "<vendor>,<chip>-clint" and "sifive,clint<version>".
@@ -44,6 +50,7 @@ properties:
 
   interrupts-extended:
     minItems: 1
+    maxItems: 4095
 
 additionalProperties: false
 
@@ -56,10 +63,10 @@ examples:
   - |
     timer@2000000 {
       compatible = "sifive,fu540-c000-clint", "sifive,clint0";
-      interrupts-extended = <&cpu1intc 3 &cpu1intc 7
-                             &cpu2intc 3 &cpu2intc 7
-                             &cpu3intc 3 &cpu3intc 7
-                             &cpu4intc 3 &cpu4intc 7>;
+      interrupts-extended = <&cpu1intc 3>, <&cpu1intc 7>,
+                            <&cpu2intc 3>, <&cpu2intc 7>,
+                            <&cpu3intc 3>, <&cpu3intc 7>,
+                            <&cpu4intc 3>, <&cpu4intc 7>;
        reg = <0x2000000 0x10000>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml
new file mode 100644
index 000000000000..901848d298ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/st,nomadik-mtu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ST Microelectronics Nomadik Multi-Timer Unit MTU Timer
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: This timer is found in the ST Microelectronics Nomadik
+  SoCs STn8800, STn8810 and STn8815 as well as in ST-Ericsson DB8500.
+
+properties:
+  compatible:
+    items:
+      - const: st,nomadik-mtu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: The first clock named TIMCLK clocks the actual timers and
+      the second clock clocks the digital interface to the interconnect.
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: timclk
+      - const: apb_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    timer@a03c6000 {
+      compatible = "st,nomadik-mtu";
+      reg = <0xa03c6000 0x1000>;
+      interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+      clock-names = "timclk", "apb_pclk";
+    };
diff --git a/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
new file mode 100644
index 000000000000..acbb6f8997ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,timer-dm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/ti,timer-dm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI dual-mode timer
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI dual-mode timer is a general purpose timer with PWM capabilities.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,am335x-timer
+              - ti,am335x-timer-1ms
+              - ti,am654-timer
+              - ti,dm814-timer
+              - ti,dm816-timer
+              - ti,omap2420-timer
+              - ti,omap3430-timer
+              - ti,omap4430-timer
+              - ti,omap5430-timer
+      - items:
+          - const: ti,am4372-timer
+          - const: ti,am335x-timer
+      - items:
+          - const: ti,am4372-timer-1ms
+          - const: ti,am335x-timer-1ms
+
+  reg:
+    items:
+      - description: IO address
+      - description: L3 to L4 mapping for omap4/5 L4 ABE
+    minItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: System clock for omap4/5 and dra7
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+      - const: timer_sys_ck
+    minItems: 1
+
+  power-domains:
+    description:
+      Power domain if available
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt if available. The timer PWM features may be usable
+      in a limited way even without interrupts.
+    maxItems: 1
+
+  ti,timer-alwon:
+    description:
+      Timer is always enabled when the SoC is powered. Note that some SoCs like
+      am335x can suspend to PM coprocessor RTC only mode and in that case the
+      SoC power is cut including timers.
+    type: boolean
+
+  ti,timer-dsp:
+    description:
+      Timer is routable to the DSP in addition to the operating system.
+    type: boolean
+
+  ti,timer-pwm:
+    description:
+      Timer has been wired for PWM capability.
+    type: boolean
+
+  ti,timer-secure:
+    description:
+      Timer access has been limited to secure mode only.
+    type: boolean
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with timer. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am654-timer
+    then:
+      required:
+        - power-domains
+    else:
+      required:
+        - interrupts
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,omap3430-timer
+                - ti,omap4430-timer
+                - ti,omap5430-timer
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,dm814-timer
+              - ti,dm816-timer
+              - ti,omap2420-timer
+              - ti,omap3430-timer
+    then:
+      properties:
+        ti,hwmods:
+          items:
+            - pattern: "^timer([1-9]|1[0-2])$"
+    else:
+      properties:
+        ti,hwmods: false
+
+examples:
+  - |
+    timer1: timer@0 {
+      compatible = "ti,am335x-timer-1ms";
+      reg = <0x0 0x400>;
+      interrupts = <67>;
+      ti,timer-alwon;
+      clocks = <&timer1_fck>;
+      clock-names = "fck";
+    };
+...
diff --git a/Documentation/devicetree/bindings/timer/ti,timer.txt b/Documentation/devicetree/bindings/timer/ti,timer.txt
deleted file mode 100644
index d02e27c764ec..000000000000
--- a/Documentation/devicetree/bindings/timer/ti,timer.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-OMAP Timer bindings
-
-Required properties:
-- compatible:		Should be set to one of the below. Please note that
-			OMAP44xx devices have timer instances that are 100%
-			register compatible with OMAP3xxx devices as well as
-			newer timers that are not 100% register compatible.
-			So for OMAP44xx devices timer instances may use
-			different compatible strings.
-
-			ti,omap2420-timer (applicable to OMAP24xx devices)
-			ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
-			ti,omap4430-timer (applicable to OMAP44xx devices)
-			ti,omap5430-timer (applicable to OMAP543x devices)
-			ti,am335x-timer	(applicable to AM335x devices)
-			ti,am335x-timer-1ms (applicable to AM335x devices)
-
-- reg:			Contains timer register address range (base address and
-			length).
-- interrupts: 		Contains the interrupt information for the timer. The
-			format is being dependent on which interrupt controller
-			the OMAP device uses.
-- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
-			where <X> is the instance number of the timer from the
-			HW spec.
-
-Optional properties:
-- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
-- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
-			addition to the ARM CPU.
-- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
-- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
-			and therefore cannot be used by the kernel.
-
-Example:
-
-timer12: timer@48304000 {
-	compatible = "ti,omap3430-timer";
-	reg = <0x48304000 0x400>;
-	interrupts = <95>;
-	ti,hwmods = "timer12"
-	ti,timer-alwon;
-	ti,timer-secure;
-};
diff --git a/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml b/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml
new file mode 100644
index 000000000000..b1597db04263
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/xlnx,xps-timer.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/xlnx,xps-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE IP AXI Timer
+
+maintainers:
+  - Sean Anderson <sean.anderson@seco.com>
+
+properties:
+  compatible:
+    contains:
+      const: xlnx,xps-timer-1.00.a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  '#pwm-cells': true
+
+  xlnx,count-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32]
+    default: 32
+    description:
+      The width of the counter(s), in bits.
+
+  xlnx,one-timer-only:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Whether only one timer is present in this block.
+
+required:
+  - compatible
+  - reg
+  - xlnx,one-timer-only
+
+allOf:
+  - if:
+      required:
+        - '#pwm-cells'
+    then:
+      allOf:
+        - required:
+            - clocks
+        - properties:
+            xlnx,one-timer-only:
+              const: 0
+    else:
+      required:
+        - interrupts
+  - if:
+      required:
+        - clocks
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    timer@800e0000 {
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        interrupts = <0 39 2>;
+        xlnx,count-width = <16>;
+        xlnx,one-timer-only = <0x0>;
+    };
+
+    timer@800f0000 {
+        #pwm-cells = <0>;
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        xlnx,count-width = <32>;
+        xlnx,one-timer-only = <0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
new file mode 100644
index 000000000000..fd6a7b51f571
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hardware-timestamps-common.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hardware-timestamps-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware timestamp providers
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Some devices/SoCs have hardware timestamp engines (HTE) which can use
+  hardware means to timestamp entity in realtime. The entity could be anything
+  from GPIOs, IRQs, Bus and so on. The hardware timestamp engine present
+  itself as a provider with the bindings described in this document.
+
+properties:
+  $nodename:
+    pattern: "^timestamp(@.*|-[0-9a-f])?$"
+
+  "#timestamp-cells":
+    description:
+      Number of cells in a HTE specifier.
+
+required:
+  - "#timestamp-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
new file mode 100644
index 000000000000..5142d6d4fc0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/hte-consumer.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/hte-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HTE Consumer
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+select: true
+
+properties:
+  timestamps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The list of HTE provider phandle. The first cell must represent the
+      provider phandle followed by the line identifiers. The meaning of the
+      line identifier and exact number of arguments must be specified in the
+      HTE provider device tree binding document.
+
+  timestamp-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description:
+      An optional string property to label each line specifier present in the
+      timestamp property.
+
+dependencies:
+  timestamp-names: [ timestamps ]
+
+additionalProperties: true
+
+examples:
+  - |
+    hte_tegra_consumer {
+              timestamps = <&tegra_hte_aon 0x9>, <&tegra_hte_lic 0x19>;
+              timestamp-names = "hte-gpio", "hte-i2c";
+    };
diff --git a/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
new file mode 100644
index 000000000000..c31e207d1652
--- /dev/null
+++ b/Documentation/devicetree/bindings/timestamp/nvidia,tegra194-hte.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timestamp/nvidia,tegra194-hte.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra194 on chip generic hardware timestamping engine (HTE)
+
+maintainers:
+  - Dipen Patel <dipenp@nvidia.com>
+
+description:
+  Tegra SoC has two instances of generic hardware timestamping engines (GTE)
+  known as GTE GPIO and GTE IRQ, which can monitor subset of GPIO and on chip
+  IRQ lines for the state change respectively, upon detection it will record
+  timestamp (taken from system counter) in its internal hardware FIFO. It has
+  a bitmap array arranged in 32bit slices where each bit represent signal/line
+  to enable or disable for the hardware timestamping. The GTE GPIO monitors
+  GPIO lines from the AON (always on) GPIO controller.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-gte-aon
+      - nvidia,tegra194-gte-lic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvidia,int-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HTE device generates its interrupt based on this u32 FIFO threshold
+      value. The recommended value is 1.
+    minimum: 1
+    maximum: 256
+
+  nvidia,slices:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      HTE lines are arranged in 32 bit slice where each bit represents different
+      line/signal that it can enable/configure for the timestamp. It is u32
+      property and depends on the HTE instance in the chip. The value 3 is for
+      GPIO GTE and 11 for IRQ GTE.
+    enum: [3, 11]
+
+  '#timestamp-cells':
+    description:
+      This represents number of line id arguments as specified by the
+      consumers. For the GTE IRQ, this is IRQ number as mentioned in the
+      SoC technical reference manual. For the GTE GPIO, its value is same as
+      mentioned in the nvidia GPIO device tree binding document.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,slices
+  - "#timestamp-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    tegra_hte_aon: timestamp@c1e0000 {
+              compatible = "nvidia,tegra194-gte-aon";
+              reg = <0xc1e0000 0x10000>;
+              interrupts = <0 13 0x4>;
+              nvidia,int-threshold = <1>;
+              nvidia,slices = <3>;
+              #timestamp-cells = <1>;
+    };
+
+  - |
+    tegra_hte_lic: timestamp@3aa0000 {
+              compatible = "nvidia,tegra194-gte-lic";
+              reg = <0x3aa0000 0x10000>;
+              interrupts = <0 11 0x4>;
+              nvidia,int-threshold = <1>;
+              nvidia,slices = <11>;
+              #timestamp-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index c451ae82d8d7..61746755c107 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -31,7 +31,7 @@ properties:
       - enum:
             # SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
           - ad,ad7414
-            # ADM9240:  Complete System Hardware Monitor for uProcessor-Based Systems
+            # ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems
           - ad,adm9240
             # AD5110 - Nonvolatile Digital Potentiometer
           - adi,ad5110
@@ -41,13 +41,17 @@ properties:
           - adi,adp5585-02
             # Analog Devices ADP5589 Keypad Decoder and I/O Expansion
           - adi,adp5589
+            # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher
+          - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
-            # i2c serial eeprom  (24cxx)
+            # i2c serial eeprom (24cxx)
           - at,24c08
             # i2c trusted platform module (TPM)
           - atmel,at97sc3204t
-            # i2c h/w symmetric crypto module
+            # ATSHA204 - i2c h/w symmetric crypto module
+          - atmel,atsha204
+            # ATSHA204A - i2c h/w symmetric crypto module
           - atmel,atsha204a
             # i2c h/w elliptic curve crypto module
           - atmel,atecc508a
@@ -77,7 +81,7 @@ properties:
           - delta,ahe50dc-fan
             # Delta Electronics DPS-650-AB power supply
           - delta,dps650ab
-          # Delta Electronics DPS920AB 920W 54V Power Supply
+            # Delta Electronics DPS920AB 920W 54V Power Supply
           - delta,dps920ab
             # 1/4 Brick DC/DC Regulated Power Module
           - delta,q54sj108a2
@@ -87,10 +91,10 @@ properties:
           - devantech,srf08
             # Devantech SRF10 ultrasonic ranger
           - devantech,srf10
+            # DH electronics GmbH on-board CPLD trivial SPI device
+          - dh,dhcom-board
             # DA9053: flexible system level PMIC with multicore support
           - dlg,da9053
-            # DA9063: system PMIC for quad-core application processors
-          - dlg,da9063
             # DMARD05: 3-axis I2C Accelerometer
           - domintech,dmard05
             # DMARD06: 3-axis I2C Accelerometer
@@ -123,24 +127,40 @@ properties:
           - ibm,cffps2
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
-          # Infineon IR38060 Voltage Regulator
+            # Infineon IR38060 Voltage Regulator
           - infineon,ir38060
             # Infineon IR38064 Voltage Regulator
           - infineon,ir38064
-          # Infineon IR38164 Voltage Regulator
+            # Infineon IR38164 Voltage Regulator
           - infineon,ir38164
-          # Infineon IR38263 Voltage Regulator
+            # Infineon IR38263 Voltage Regulator
           - infineon,ir38263
             # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
           - infineon,slb9635tt
             # Infineon SLB9645 I2C TPM (new protocol, max 400khz)
           - infineon,slb9645tt
+            # Infineon SLB9673 I2C TPM 2.0
+          - infineon,slb9673
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor
           - infineon,tlv493d-a1b6
+            # Infineon Multi-phase Digital VR Controller xdpe11280
+          - infineon,xdpe11280
             # Infineon Multi-phase Digital VR Controller xdpe12254
           - infineon,xdpe12254
             # Infineon Multi-phase Digital VR Controller xdpe12284
           - infineon,xdpe12284
+            # Infineon Multi-phase Digital VR Controller xdpe15284
+          - infineon,xdpe15284
+            # Infineon Multi-phase Digital VR Controller xdpe152c4
+          - infineon,xdpe152c4
+            # Injoinic IP5108 2.0A Power Bank IC with I2C
+          - injoinic,ip5108
+            # Injoinic IP5109 2.1A Power Bank IC with I2C
+          - injoinic,ip5109
+            # Injoinic IP5207 1.2A Power Bank IC with I2C
+          - injoinic,ip5207
+            # Injoinic IP5209 2.4A Power Bank IC with I2C
+          - injoinic,ip5209
             # Inspur Power System power supply unit version 1
           - inspur,ipsps1
             # Intersil ISL29028 Ambient Light and Proximity Sensor
@@ -157,6 +177,8 @@ properties:
           - maxim,ds1803-050
             # 100 kOhm digital potentiometer with I2C interface
           - maxim,ds1803-100
+            # 10 kOhm digital potentiometer with I2C interface
+          - maxim,ds3502
             # Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
           - maxim,max1237
             # Temperature Sensor, I2C interface
@@ -203,6 +225,8 @@ properties:
           - memsic,mxc6255
             # MEMSIC 3-axis accelerometer
           - memsic,mxc6655
+            # Menlo on-board CPLD trivial SPI device
+          - menlo,m53cpld
             # Microchip differential I2C ADC, 1 Channel, 18 bit
           - microchip,mcp3421
             # Microchip differential I2C ADC, 2 Channel, 18 bit
@@ -283,12 +307,16 @@ properties:
           - renesas,isl29501
             # S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
           - samsung,24ad0xd1
+            # Samsung Exynos SoC SATA PHY I2C device
+          - samsung,exynos-sataphy-i2c
             # Sensirion low power multi-pixel gas sensor with I2C interface
           - sensirion,sgpc3
             # Sensirion multi-pixel gas sensor with I2C interface
           - sensirion,sgp30
             # Sensirion gas sensor with I2C interface
           - sensirion,sgp40
+            # Sensirion temperature & humidity sensor with I2C interface
+          - sensirion,sht4x
             # Sensortek 3 axis accelerometer
           - sensortek,stk8312
             # Sensortek 3 axis accelerometer
@@ -301,9 +329,9 @@ properties:
           - skyworks,sky81452
             # Socionext SynQuacer TPM MMIO module
           - socionext,synquacer-tpm-mmio
-            # i2c serial eeprom  (24cxx)
-          - sparkfun,qwiic-joystick
             # SparkFun Qwiic Joystick (COM-15168) with i2c interface
+          - sparkfun,qwiic-joystick
+            # i2c serial eeprom (24cxx)
           - st,24c256
             # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
           - taos,tsl2550
@@ -335,16 +363,26 @@ properties:
             # Thermometer with SPI interface
           - ti,tmp121
           - ti,tmp122
+          - ti,tmp125
             # Digital Temperature Sensor
           - ti,tmp275
+            # TI DC-DC converter on PMBus
+          - ti,tps40400
             # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
           - ti,tps53676
             # TI Dual channel DCAP+ multiphase controller TPS53679
           - ti,tps53679
             # TI Dual channel DCAP+ multiphase controller TPS53688
           - ti,tps53688
+            # TI DC-DC converters on PMBus
+          - ti,tps544b20
+          - ti,tps544b25
+          - ti,tps544c20
+          - ti,tps544c25
             # Winbond/Nuvoton H/W Monitor
           - winbond,w83793
+            # Vicor Corporation Digital Supervisor
+          - vicor,pli1209bc
             # i2c trusted platform module (TPM)
           - winbond,wpct301
 
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
deleted file mode 100644
index 02347b017abd..000000000000
--- a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Cadence Universal Flash Storage (UFS) Controller
-
-UFS nodes are defined to describe on-chip UFS host controllers.
-Each UFS controller instance should have its own node.
-Please see the ufshcd-pltfrm.txt for a list of all available properties.
-
-Required properties:
-- compatible	: Compatible list, contains one of the following controllers:
-			"cdns,ufshc" - Generic CDNS HCI,
-			"cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm PHY
-		  complemented with the JEDEC version:
-			"jedec,ufs-2.0"
-
-- reg		: Address and length of the UFS register set.
-- interrupts	: One interrupt mapping.
-- freq-table-hz	: Clock frequency table.
-		  See the ufshcd-pltfrm.txt for details.
-- clocks	: List of phandle and clock specifier pairs.
-- clock-names	: List of clock input name strings sorted in the same
-		  order as the clocks property. "core_clk" is mandatory.
-		  Depending on a type of a PHY,
-		  the "phy_clk" clock can also be added, if needed.
-
-Example:
-	ufs@fd030000 {
-		compatible = "cdns,ufshc", "jedec,ufs-2.0";
-		reg = <0xfd030000 0x10000>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
-		freq-table-hz = <0 0>, <0 0>;
-		clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
-		clock-names = "core_clk", "phy_clk";
-	};
diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
new file mode 100644
index 000000000000..fb45f66d6454
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/cdns,ufshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - cdns,ufshc
+          - cdns,ufshc-m31-16nm
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - cdns,ufshc
+            # CDNS UFS HC + M31 16nm PHY
+          - cdns,ufshc-m31-16nm
+      - const: jedec,ufs-2.0
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core_clk
+      - const: phy_clk
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ufs@fd030000 {
+        compatible = "cdns,ufshc", "jedec,ufs-2.0";
+        reg = <0xfd030000 0x10000>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+        freq-table-hz = <0 0>, <0 0>;
+        clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
+        clock-names = "core_clk", "phy_clk";
+    };
diff --git a/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
new file mode 100644
index 000000000000..4432bfa0cbc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/hisilicon,ufs.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/hisilicon,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - hisilicon,hi3660-ufs
+          - hisilicon,hi3670-ufs
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: hisilicon,hi3660-ufs
+          - const: jedec,ufs-1.1
+      - items:
+          - enum:
+              - hisilicon,hi3670-ufs
+          - const: jedec,ufs-2.1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref_clk
+      - const: phy_clk
+
+  reg:
+    items:
+      - description: UFS register address space
+      - description: UFS SYS CTRL register address space
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+required:
+  - compatible
+  - reg
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+            reg = <0x0 0xff3c0000 0x0 0x1000>,
+                  <0x0 0xff3e0000 0x0 0x1000>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+                     <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+            clock-names = "ref_clk", "phy_clk";
+            freq-table-hz = <0 0>,
+                            <0 0>;
+
+            resets = <&crg_rst 0x84 12>;
+            reset-names = "rst";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
new file mode 100644
index 000000000000..32fd535a514a
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/mediatek,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Stanley Chu <stanley.chu@mediatek.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-ufshci
+      - mediatek,mt8192-ufshci
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ufs
+
+  phys:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - phys
+  - reg
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@ff3c0000 {
+            compatible = "mediatek,mt8183-ufshci";
+            reg = <0 0x11270000 0 0x2300>;
+            interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+            phys = <&ufsphy>;
+
+            clocks = <&infracfg_ao CLK_INFRA_UFS>;
+            clock-names = "ufs";
+            freq-table-hz = <0 0>;
+
+            vcc-supply = <&mt_pmic_vemc_ldo_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
new file mode 100644
index 000000000000..f2d6298d926c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/qcom,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Andy Gross <agross@kernel.org>
+
+# Select only our matches, not all jedec,ufs-2.0
+select:
+  properties:
+    compatible:
+      contains:
+        const: qcom,ufshc
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8994-ufshc
+          - qcom,msm8996-ufshc
+          - qcom,msm8998-ufshc
+          - qcom,sc8280xp-ufshc
+          - qcom,sdm845-ufshc
+          - qcom,sm6350-ufshc
+          - qcom,sm8150-ufshc
+          - qcom,sm8250-ufshc
+          - qcom,sm8350-ufshc
+          - qcom,sm8450-ufshc
+      - const: qcom,ufshc
+      - const: jedec,ufs-2.0
+
+  clocks:
+    minItems: 8
+    maxItems: 11
+
+  clock-names:
+    minItems: 8
+    maxItems: 11
+
+  interconnects:
+    minItems: 2
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ufs-ddr
+      - const: cpu-ufs
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: ufsphy
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  reset-names:
+    items:
+      - const: rst
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the RESET pin of the UFS memory device.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: ufs-common.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-ufshc
+              - qcom,sc8280xp-ufshc
+              - qcom,sm8250-ufshc
+              - qcom,sm8350-ufshc
+              - qcom,sm8450-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: rx_lane1_sync_clk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-ufshc
+              - qcom,sm6350-ufshc
+              - qcom,sm8150-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: core_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+            - const: rx_lane1_sync_clk
+            - const: ice_core_clk
+        reg:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-ufshc
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: core_clk_src
+            - const: core_clk
+            - const: bus_clk
+            - const: bus_aggr_clk
+            - const: iface_clk
+            - const: core_clk_unipro_src
+            - const: core_clk_unipro
+            - const: core_clk_ice
+            - const: ref_clk
+            - const: tx_lane0_sync_clk
+            - const: rx_lane0_sync_clk
+        reg:
+          minItems: 1
+          maxItems: 1
+
+    # TODO: define clock bindings for qcom,msm8994-ufshc
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufs@1d84000 {
+            compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+                         "jedec,ufs-2.0";
+            reg = <0 0x01d84000 0 0x3000>;
+            interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&ufs_mem_phy_lanes>;
+            phy-names = "ufsphy";
+            lanes-per-direction = <2>;
+            #reset-cells = <1>;
+            resets = <&gcc GCC_UFS_PHY_BCR>;
+            reset-names = "rst";
+            reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+            vcc-supply = <&vreg_l7b_2p5>;
+            vcc-max-microamp = <1100000>;
+            vccq-supply = <&vreg_l9b_1p2>;
+            vccq-max-microamp = <1200000>;
+
+            power-domains = <&gcc UFS_PHY_GDSC>;
+            iommus = <&apps_smmu 0xe0 0x0>;
+            interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
+                            <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+            interconnect-names = "ufs-ddr", "cpu-ufs";
+
+            clock-names = "core_clk",
+                          "bus_aggr_clk",
+                          "iface_clk",
+                          "core_clk_unipro",
+                          "ref_clk",
+                          "tx_lane0_sync_clk",
+                          "rx_lane0_sync_clk",
+                          "rx_lane1_sync_clk";
+            clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+                     <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                     <&gcc GCC_UFS_PHY_AHB_CLK>,
+                     <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+                     <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+                     <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+            freq-table-hz = <75000000 300000000>,
+                            <0 0>,
+                            <0 0>,
+                            <75000000 300000000>,
+                            <75000000 300000000>,
+                            <0 0>,
+                            <0 0>,
+                            <0 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
new file mode 100644
index 000000000000..f04f9f61fa9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/renesas,ufs.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/renesas,ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car UFS Host Controller
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ufs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fck
+      - const: ref_clk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ufs: ufs@e686000 {
+            compatible = "renesas,r8a779f0-ufs";
+            reg = <0xe6860000 0x100>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+            clock-names = "fck", "ref_clk";
+            freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+            power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+            resets = <&cpg 1514>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
index 95ac1c18334d..a9988798898d 100644
--- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml
@@ -4,24 +4,24 @@
 $id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung SoC series UFS host controller Device Tree Bindings
+title: Samsung SoC series UFS host controller
 
 maintainers:
   - Alim Akhtar <alim.akhtar@samsung.com>
 
 description: |
   Each Samsung UFS host controller instance should have its own node.
-  This binding define Samsung specific binding other then what is used
-  in the common ufshcd bindings
-  [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
 
-properties:
+allOf:
+  - $ref: ufs-common.yaml
 
+properties:
   compatible:
     enum:
       - samsung,exynos7-ufs
       - samsung,exynosautov9-ufs
       - samsung,exynosautov9-ufs-vh
+      - tesla,fsd-ufs
 
   reg:
     items:
@@ -47,9 +47,6 @@ properties:
       - const: core_clk
       - const: sclk_unipro_main
 
-  interrupts:
-    maxItems: 1
-
   phys:
     maxItems: 1
 
@@ -67,13 +64,12 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
   - phys
   - phy-names
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml
new file mode 100644
index 000000000000..671a70d95138
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/snps,tc-dwc-g210.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/snps,tc-dwc-g210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Flash Storage (UFS) Controller
+
+maintainers:
+  - Li Wei <liwei213@huawei.com>
+
+# Select only our matches, not all jedec,ufs
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - snps,dwc-ufshcd-1.40a
+  required:
+    - compatible
+
+allOf:
+  - $ref: ufs-common.yaml
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - snps,g210-tc-6.00-20bit
+          - snps,g210-tc-6.00-40bit
+      - const: snps,dwc-ufshcd-1.40a
+      - const: jedec,ufs-2.0
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ufs@d0000000 {
+        compatible = "snps,g210-tc-6.00-40bit",
+                     "snps,dwc-ufshcd-1.40a",
+                     "jedec,ufs-2.0";
+        reg = <0xd0000000 0x10000>;
+        interrupts = <24>;
+    };
diff --git a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt b/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
deleted file mode 100644
index 71c0777960e9..000000000000
--- a/Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Universal Flash Storage (UFS) DesignWare Host Controller
-
-DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
-Each UFS controller instance should have its own node.
-
-Required properties:
-- compatible	: compatible list must contain the PHY type & version:
-			"snps,g210-tc-6.00-20bit"
-			"snps,g210-tc-6.00-40bit"
-		  complemented with the Controller IP version:
-			"snps,dwc-ufshcd-1.40a"
-		  complemented with the JEDEC version:
-			"jedec,ufs-1.1"
-			"jedec,ufs-2.0"
-
-- reg		: <registers mapping>
-- interrupts	: <interrupt mapping for UFS host controller IRQ>
-
-Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
-	dwc-ufs@d0000000 {
-		compatible = "snps,g210-tc-6.00-40bit",
-			     "snps,dwc-ufshcd-1.40a",
-			     "jedec,ufs-2.0";
-		reg = < 0xd0000000 0x10000 >;
-		interrupts = < 24 >;
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
index 4d13e6bc1c50..c5eca7735f76 100644
--- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
@@ -47,11 +47,10 @@ required:
 
 patternProperties:
   "^ufs@[0-9a-f]+$":
-    type: object
+    $ref: cdns,ufshc.yaml
     description: |
-      Cadence UFS controller node must be the child node. Refer
-      Documentation/devicetree/bindings/ufs/cdns,ufshc.txt for binding
-      documentation of child node
+      Cadence UFS controller node must be the child node.
+    unevaluatedProperties: false
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
new file mode 100644
index 000000000000..47a4e9e1a775
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - Avri Altman <avri.altman@wdc.com>
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  freq-table-hz:
+    items:
+      items:
+        - description: Minimum frequency for given clock in Hz
+        - description: Maximum frequency for given clock in Hz
+    description: |
+      Array of <min max> operating frequencies in Hz stored in the same order
+      as the clocks property. If this property is not defined or a value in the
+      array is "0" then it is assumed that the frequency is set by the parent
+      clock or a fixed rate clock source.
+
+  interrupts:
+    maxItems: 1
+
+  lanes-per-direction:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 2
+    description:
+      Number of lanes available per direction.  Note that it is assume same
+      number of lanes is used both directions at once.
+
+  vdd-hba-supply:
+    description:
+      Phandle to UFS host controller supply regulator node.
+
+  vcc-supply:
+    description:
+      Phandle to VCC supply regulator node.
+
+  vccq-supply:
+    description:
+      Phandle to VCCQ supply regulator node.
+
+  vccq2-supply:
+    description:
+      Phandle to VCCQ2 supply regulator node.
+
+  vcc-supply-1p8:
+    type: boolean
+    description:
+      For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+      boolean property when set, specifies to use low voltage range of
+      1.7-1.95V. Note for external UFS cards this property is invalid and valid
+      VCC range is always 2.7-3.6V.
+
+  vcc-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCC supply.
+
+  vccq-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCCQ supply.
+
+  vccq2-max-microamp:
+    description:
+      Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+  freq-table-hz: [ 'clocks' ]
+
+required:
+  - interrupts
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
deleted file mode 100644
index 0b83df1a5418..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Hisilicon Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-Required properties:
-- compatible        : compatible list, contains one of the following -
-					"hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
-					host controller present on Hi3660 chipset.
-					"hisilicon,hi3670-ufs", "jedec,ufs-2.1" for hisi ufs
-					host controller present on Hi3670 chipset.
-- reg               : should contain UFS register address space & UFS SYS CTRL register address,
-- interrupts        : interrupt number
-- clocks	        : List of phandle and clock specifier pairs
-- clock-names       : List of clock input name strings sorted in the same
-					order as the clocks property. "ref_clk", "phy_clk" is optional
-- freq-table-hz     : Array of <min max> operating frequencies stored in the same
-                      order as the clocks property. If this property is not
-                      defined or a value in the array is "0" then it is assumed
-                      that the frequency is set by the parent clock or a
-                      fixed rate clock source.
-- resets            : describe reset node register
-- reset-names       : reset node register, the "rst" corresponds to reset the whole UFS IP.
-
-Example:
-
-	ufs: ufs@ff3b0000 {
-		compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
-		/* 0: HCI standard */
-		/* 1: UFS SYS CTRL */
-		reg = <0x0 0xff3b0000 0x0 0x1000>,
-			<0x0 0xff3b1000 0x0 0x1000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
-			<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
-		clock-names = "ref_clk", "phy_clk";
-		freq-table-hz = <0 0>, <0 0>;
-		/* offset: 0x84; bit: 12  */
-		resets = <&crg_rst 0x84 12>;
-		reset-names = "rst";
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
deleted file mode 100644
index 63a953b672d2..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Mediatek Universal Flash Storage (UFS) Host Controller
-
-UFS nodes are defined to describe on-chip UFS hardware macro.
-Each UFS Host Controller should have its own node.
-
-To bind UFS PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS M-PHY node.
-
-Required properties for UFS nodes:
-- compatible         : Compatible list, contains the following controller:
-                       "mediatek,mt8183-ufshci" for MediaTek UFS host controller
-                       present on MT8183 chipsets.
-                       "mediatek,mt8192-ufshci" for MediaTek UFS host controller
-                       present on MT8192 chipsets.
-- reg                : Address and length of the UFS register set.
-- phys               : phandle to m-phy.
-- clocks             : List of phandle and clock specifier pairs.
-- clock-names        : List of clock input name strings sorted in the same
-                       order as the clocks property. "ufs" is mandatory.
-                       "ufs": ufshci core control clock.
-- freq-table-hz      : Array of <min max> operating frequencies stored in the same
-                       order as the clocks property. If this property is not
-                       defined or a value in the array is "0" then it is assumed
-                       that the frequency is set by the parent clock or a
-                       fixed rate clock source.
-- vcc-supply         : phandle to VCC supply regulator node.
-
-Example:
-
-	ufsphy: phy@11fa0000 {
-		...
-	};
-
-	ufshci@11270000 {
-		compatible = "mediatek,mt8183-ufshci";
-		reg = <0 0x11270000 0 0x2300>;
-		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
-		phys = <&ufsphy>;
-
-		clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>;
-		clock-names = "ufs";
-		freq-table-hz = <0 0>;
-
-		vcc-supply = <&mt_pmic_vemc_ldo_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
deleted file mode 100644
index fd59f93e9556..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
-
-UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
-Each UFS PHY node should have its own node.
-
-To bind UFS PHY with UFS host controller, the controller node should
-contain a phandle reference to UFS PHY node.
-
-Required properties:
-- compatible        : compatible list, contains one of the following -
-			"qcom,ufs-phy-qmp-20nm" for 20nm ufs phy,
-			"qcom,ufs-phy-qmp-14nm" for legacy 14nm ufs phy,
-			"qcom,msm8996-ufs-phy-qmp-14nm" for 14nm ufs phy
-			 present on MSM8996 chipset.
-- reg               : should contain PHY register address space (mandatory),
-- reg-names         : indicates various resources passed to driver (via reg proptery) by name.
-                      Required "reg-names" is "phy_mem".
-- #phy-cells        : This property shall be set to 0
-- vdda-phy-supply   : phandle to main PHY supply for analog domain
-- vdda-pll-supply   : phandle to PHY PLL and Power-Gen block power supply
-- clocks	    : List of phandle and clock specifier pairs
-- clock-names       : List of clock input name strings sorted in the same
-		      order as the clocks property. "ref_clk_src", "ref_clk",
-		      "tx_iface_clk" & "rx_iface_clk" are mandatory but
-		      "ref_clk_parent" is optional
-
-Optional properties:
-- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
-- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
-- vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
-- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
-- resets : specifies the PHY reset in the UFS controller
-
-Example:
-
-	ufsphy1: ufsphy@fc597000 {
-		compatible = "qcom,ufs-phy-qmp-20nm";
-		reg = <0xfc597000 0x800>;
-		reg-names = "phy_mem";
-		#phy-cells = <0>;
-		vdda-phy-supply = <&pma8084_l4>;
-		vdda-pll-supply = <&pma8084_l12>;
-		vdda-phy-max-microamp = <50000>;
-		vdda-pll-max-microamp = <1000>;
-		clock-names = "ref_clk_src",
-			"ref_clk_parent",
-			"ref_clk",
-			"tx_iface_clk",
-			"rx_iface_clk";
-		clocks = <&clock_rpm clk_ln_bb_clk>,
-			<&clock_gcc clk_pcie_1_phy_ldo >,
-			<&clock_gcc clk_ufs_phy_ldo>,
-			<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
-			<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
-		resets = <&ufshc 0>;
-	};
-
-	ufshc: ufshc@fc598000 {
-		#reset-cells = <1>;
-		...
-		phys = <&ufsphy1>;
-		phy-names = "ufsphy";
-	};
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
deleted file mode 100644
index d8fd4df81743..000000000000
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-* Universal Flash Storage (UFS) Host Controller
-
-UFSHC nodes are defined to describe on-chip UFS host controllers.
-Each UFS controller instance should have its own node.
-
-Required properties:
-- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0"
-
-			  For Qualcomm SoCs must contain, as below, an
-			  SoC-specific compatible along with "qcom,ufshc" and
-			  the appropriate jedec string:
-			    "qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,sm8150-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-			    "qcom,sm8350-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
-- interrupts        : <interrupt mapping for UFS host controller IRQ>
-- reg               : <registers mapping>
-
-Optional properties:
-- phys                  : phandle to UFS PHY node
-- phy-names             : the string "ufsphy" when is found in a node, along
-                          with "phys" attribute, provides phandle to UFS PHY node
-- vdd-hba-supply        : phandle to UFS host controller supply regulator node
-- vcc-supply            : phandle to VCC supply regulator node
-- vccq-supply           : phandle to VCCQ supply regulator node
-- vccq2-supply          : phandle to VCCQ2 supply regulator node
-- vcc-supply-1p8        : For embedded UFS devices, valid VCC range is 1.7-1.95V
-                          or 2.7-3.6V. This boolean property when set, specifies
-			  to use low voltage range of 1.7-1.95V. Note for external
-			  UFS cards this property is invalid and valid VCC range is
-			  always 2.7-3.6V.
-- vcc-max-microamp      : specifies max. load that can be drawn from vcc supply
-- vccq-max-microamp     : specifies max. load that can be drawn from vccq supply
-- vccq2-max-microamp    : specifies max. load that can be drawn from vccq2 supply
-
-- clocks                : List of phandle and clock specifier pairs
-- clock-names           : List of clock input name strings sorted in the same
-                          order as the clocks property.
-			  "ref_clk" indicates reference clock frequency.
-			  UFS host supplies reference clock to UFS device and UFS device
-			  specification allows host to provide one of the 4 frequencies (19.2 MHz,
-			  26 MHz, 38.4 MHz, 52MHz) for reference clock. This "ref_clk" entry is
-			  parsed and used to update the reference clock setting in device.
-			  Defaults to 26 MHz(as per specification) if not specified by host.
-- freq-table-hz		: Array of <min max> operating frequencies stored in the same
-                          order as the clocks property. If this property is not
-			  defined or a value in the array is "0" then it is assumed
-			  that the frequency is set by the parent clock or a
-			  fixed rate clock source.
--lanes-per-direction	: number of lanes available per direction - either 1 or 2.
-			  Note that it is assume same number of lanes is used both
-			  directions at once. If not specified, default is 2 lanes per direction.
-- #reset-cells		: Must be <1> for Qualcomm UFS controllers that expose
-			  PHY reset from the UFS controller.
-- resets            : reset node register
-- reset-names       : describe reset node register, the "rst" corresponds to reset the whole UFS IP.
-- reset-gpios       : A phandle and gpio specifier denoting the GPIO connected
-		      to the RESET pin of the UFS memory device.
-
-Note: If above properties are not defined it can be assumed that the supply
-regulators or clocks are always on.
-
-Example:
-	ufshc@fc598000 {
-		compatible = "jedec,ufs-1.1";
-		reg = <0xfc598000 0x800>;
-		interrupts = <0 28 0>;
-
-		vdd-hba-supply = <&xxx_reg0>;
-		vcc-supply = <&xxx_reg1>;
-		vcc-supply-1p8;
-		vccq-supply = <&xxx_reg2>;
-		vccq2-supply = <&xxx_reg3>;
-		vcc-max-microamp = 500000;
-		vccq-max-microamp = 200000;
-		vccq2-max-microamp = 200000;
-
-		clocks = <&core 0>, <&ref 0>, <&phy 0>, <&iface 0>;
-		clock-names = "core_clk", "ref_clk", "phy_clk", "iface_clk";
-		freq-table-hz = <100000000 200000000>, <0 0>, <0 0>, <0 0>;
-		resets = <&reset 0 1>;
-		reset-names = "rst";
-		phys = <&ufsphy1>;
-		phy-names = "ufsphy";
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
index 933fa356d2ce..8992eff6ce38 100644
--- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/allwinner,sun4i-a10-musb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 mUSB OTG Controller Device Tree Bindings
+title: Allwinner A10 mUSB OTG Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,6 +20,7 @@ properties:
       - items:
           - enum:
               - allwinner,sun8i-a83t-musb
+              - allwinner,sun20i-d1-musb
               - allwinner,sun50i-h6-musb
           - const: allwinner,sun8i-a33-musb
       - items:
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index 7a198a30408a..654ffc62d013 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -61,8 +61,9 @@ DMA
   endpoint number (0 … 14 for endpoints 1 … 15 on instance 0 and 15 … 29
   for endpoints 1 … 15 on instance 1). The second number is 0 for RX and
   1 for TX transfers.
-- #dma-channels: should be set to 30 representing the 15 endpoints for
+- dma-channels: should be set to 30 representing the 15 endpoints for
   each USB instance.
+- #dma-channels: deprecated
 
 Example:
 ~~~~~~~~
@@ -193,7 +194,7 @@ usb: usb@47400000 {
 		interrupts = <17>;
 		interrupt-names = "glue";
 		#dma-cells = <2>;
-		#dma-channels = <30>;
-		#dma-requests = <256>;
+		dma-channels = <30>;
+		dma-requests = <256>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index e349fa5de606..daf2a859418d 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Amlogic Meson G12A DWC3 USB SoC Controller Glue
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
new file mode 100644
index 000000000000..0e72c08e6566
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7411 Type-C controller bindings
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+properties:
+  compatible:
+    enum:
+      - analogix,anx7411
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml
+    unevaluatedProperties: false
+
+    description:
+      Properties for usb c connector.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+      power-role: true
+
+      data-role: true
+
+      try-power-role: true
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec@2c {
+            compatible = "analogix,anx7411";
+            reg = <0x2c>;
+            interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            typec_con: connector {
+                compatible = "usb-c-connector";
+                power-role = "dual";
+                data-role = "dual";
+                try-power-role = "source";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml b/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
new file mode 100644
index 000000000000..c3b6be3d8002
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 Facebook Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/aspeed,ast2600-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED USB 2.0 Device Controller
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |+
+  The ASPEED USB 2.0 Device Controller implements 1 control endpoint and
+  4 generic endpoints for AST260x.
+
+  Supports independent DMA channel for each generic endpoint.
+  Supports 32/256 stages descriptor mode for all generic endpoints.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-udc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    udc: usb@1e6a2000 {
+        compatible = "aspeed,ast2600-udc";
+        reg = <0x1e6a2000 0x300>;
+        interrupts = <9>;
+        clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usb2bd_default>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
index 8b019ac05bbe..a86bcd95100e 100644
--- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
+++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml
@@ -67,6 +67,7 @@ properties:
 
   vhub-strings:
     type: object
+    additionalProperties: false
 
     properties:
       '#address-cells':
@@ -78,6 +79,7 @@ properties:
     patternProperties:
       '^string@[0-9a-f]+$':
         type: object
+        additionalProperties: false
         description: string descriptors of the specific language
 
         properties:
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index f512f0290728..12183ef47ee4 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -87,6 +87,9 @@ Required properties:
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
 	       "microchip,sam9x60-udc"
+	       "microchip,lan9662-udc"
+	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
+	       is required.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
diff --git a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
index 2a9acf2b5a64..ad075407d85e 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/brcm,bcm7445-ehci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom STB USB EHCI Controller Device Tree Bindings
+title: Broadcom STB USB EHCI Controller
 
 allOf:
   - $ref: "usb-hcd.yaml"
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
deleted file mode 100644
index c9f52b97cef1..000000000000
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Broadcom USB Device Controller (BDC)
-====================================
-
-Required properties:
-
-- compatible: must be one of:
-                "brcm,bdc-udc-v2"
-                "brcm,bdc"
-- reg: the base register address and length
-- interrupts: the interrupt line for this controller
-
-Optional properties:
-
-On Broadcom STB platforms, these properties are required:
-
-- phys: phandle to one or two USB PHY blocks
-        NOTE: Some SoC's have a single phy and some have
-        USB 2.0 and USB 3.0 phys
-- clocks: phandle to the functional clock of this block
-
-Example:
-
-        bdc@f0b02000 {
-                compatible = "brcm,bdc-udc-v2";
-                reg = <0xf0b02000 0xfc4>;
-                interrupts = <0x0 0x60 0x0>;
-                phys = <&usbphy_0 0x0>;
-                clocks = <&sw_usbd>;
-        };
diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.yaml b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
new file mode 100644
index 000000000000..9e561fee98f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/brcm,bdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom USB Device Controller (BDC)
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bdc-udc-v2
+          - brcm,bdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: USB 2.0 or 3.0 PHY
+      - description: USB 3.0 PHY if there is a dedicated 2.0 PHY
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        usb@f0b02000 {
+                compatible = "brcm,bdc-udc-v2";
+                reg = <0xf0b02000 0xfc4>;
+                interrupts = <0x0 0x60 0x0>;
+                phys = <&usbphy_0 0x0>;
+                clocks = <&sw_usbd>;
+        };
diff --git a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
index d4618d15ecc1..5cc81ced589d 100644
--- a/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
+++ b/Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/brcm,usb-pinmap.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom USB pin map Controller Device Tree Bindings
+title: Broadcom USB pin map Controller
 
 maintainers:
   - Al Cooper <alcooperx@gmail.com>
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index a5c5db6a0b2d..ba51fb1252b9 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -151,7 +151,7 @@ Example for HSIC:
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usbnet: smsc@1 {
+		usbnet: ethernet@1 {
 			compatible = "usb424,9730";
 			reg = <1>;
 		};
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
index 9ce22551b2b3..fb2027a7d80d 100644
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -36,7 +36,8 @@ DMA
 - #dma-cells: should be set to 2. The first number represents the
   channel number (0 … 3 for endpoints 1 … 4).
   The second number is 0 for RX and 1 for TX transfers.
-- #dma-channels: should be set to 4 representing the 4 endpoints.
+- dma-channels: should be set to 4 representing the 4 endpoints.
+- #dma-channels: deprecated
 
 Example:
 	usb_phy: usb-phy {
@@ -74,7 +75,7 @@ Example:
 			reg-names = "controller", "scheduler", "queuemgr";
 			interrupts = <58>;
 			#dma-cells = <2>;
-			#dma-channels = <4>;
+			dma-channels = <4>;
 		};
 
 	};
diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index 56a818478cd7..dc4988c0009c 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -11,12 +11,20 @@ maintainers:
 
 allOf:
   - $ref: usb-drd.yaml#
+  - $ref: usb-hcd.yaml#
 
 properties:
   compatible:
     oneOf:
       - const: brcm,bcm2835-usb
       - const: hisilicon,hi6220-usb
+      - const: ingenic,jz4775-otg
+      - const: ingenic,jz4780-otg
+      - const: ingenic,x1000-otg
+      - const: ingenic,x1600-otg
+      - const: ingenic,x1700-otg
+      - const: ingenic,x1830-otg
+      - const: ingenic,x2000-otg
       - items:
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
@@ -24,6 +32,7 @@ properties:
           - enum:
               - rockchip,px30-usb
               - rockchip,rk3036-usb
+              - rockchip,rk3128-usb
               - rockchip,rk3188-usb
               - rockchip,rk3228-usb
               - rockchip,rk3288-usb
@@ -41,6 +50,7 @@ properties:
               - amlogic,meson8b-usb
               - amlogic,meson-gxbb-usb
               - amlogic,meson-g12a-usb
+              - intel,socfpga-agilex-hsotg
           - const: snps,dwc2
       - const: amcc,dwc-otg
       - const: apm,apm82181-dwc-otg
@@ -53,6 +63,7 @@ properties:
           - const: st,stm32mp15-hsotg
           - const: snps,dwc2
       - const: samsung,s3c6400-hsotg
+      - const: intel,socfpga-agilex-hsotg
 
   reg:
     maxItems: 1
@@ -67,6 +78,13 @@ properties:
     items:
       - const: otg
 
+  disable-over-current:
+    type: boolean
+    description: whether to disable detection of over-current condition.
+
+  iommus:
+    maxItems: 1
+
   resets:
     items:
       - description: common reset
@@ -114,6 +132,8 @@ properties:
 
   usb-role-switch: true
 
+  role-switch-default-mode: true
+
   g-rx-fifo-size:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: size of rx fifo size in gadget mode.
@@ -128,14 +148,27 @@ properties:
 
   snps,need-phy-for-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that the phy needs to be left on for 
+    description: If present indicates that the phy needs to be left on for
       remote wakeup during suspend.
 
   snps,reset-phy-on-wake:
     $ref: /schemas/types.yaml#/definitions/flag
-    description: If present indicates that we need to reset the PHY when we 
+    description: If present indicates that we need to reset the PHY when we
       detect a wakeup. This is due to a hardware errata.
 
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  tpl-support: true
+
+dependencies:
+  port: [ usb-role-switch ]
+  role-switch-default-mode: [ usb-role-switch ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
index 710b782ccf65..171df79360ff 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt
@@ -20,7 +20,7 @@ Example device node:
 			    refclk-type-hs = "dlmc_ref_clk0";
 			    power = <0x00000002 0x00000002 0x00000001>;
 			    xhci@1690000000000 {
-				    compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3";
+				    compatible = "cavium,octeon-7130-xhci", "snps,dwc3";
 				    reg = <0x00016900 0x00000000 0x00000010 0x00000000>;
 				    interrupt-parent = <0x00000010>;
 				    interrupts = <0x00000009 0x00000004>;
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index bf73de0d5b4a..4aa368447b1e 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -13,7 +13,7 @@ Required properties:
  - resets	: list of phandle and reset specifier pairs. There should be two entries, one
 		  for the powerdown and softreset lines of the usb3 IP
  - reset-names	: list of reset signal names. Names should be "powerdown" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
deleted file mode 100644
index 04813a46e5d0..000000000000
--- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Xilinx SuperSpeed DWC3 USB SoC controller
-
-Required properties:
-- compatible:	May contain "xlnx,zynqmp-dwc3" or "xlnx,versal-dwc3"
-- reg:		Base address and length of the register control block
-- clocks:	A list of phandles for the clocks listed in clock-names
-- clock-names:	Should contain the following:
-  "bus_clk"	 Master/Core clock, have to be >= 125 MHz for SS
-		 operation and >= 60MHz for HS operation
-
-  "ref_clk"	 Clock source to core during PHY power down
-- resets:	A list of phandles for resets listed in reset-names
-- reset-names:
-  "usb_crst"	 USB core reset
-  "usb_hibrst"	 USB hibernation reset
-  "usb_apbrst"	 USB APB reset
-
-Required child node:
-A child node must exist to represent the core DWC3 IP block. The name of
-the node is not important. The content of the node is defined in dwc3.txt.
-
-Optional properties for snps,dwc3:
-- dma-coherent:	Enable this flag if CCI is enabled in design. Adding this
-		flag configures Global SoC bus Configuration Register and
-		Xilinx USB 3.0 IP - USB coherency register to enable CCI.
-- interrupt-names: Should contain the following:
-  "dwc_usb3"	USB gadget mode interrupts
-  "otg"		USB OTG mode interrupts
-  "hiber"	USB hibernation interrupts
-
-Example device node:
-
-		usb@0 {
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			compatible = "xlnx,zynqmp-dwc3";
-			reg = <0x0 0xff9d0000 0x0 0x100>;
-			clock-names = "bus_clk", "ref_clk";
-			clocks = <&clk125>, <&clk125>;
-			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
-				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
-				 <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
-			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
-			ranges;
-
-			dwc3@fe200000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0xfe200000 0x40000>;
-				interrupt-names = "dwc_usb3", "otg", "hiber";
-				interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
-				phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
-				phy-names = "usb3-phy";
-				dr_mode = "host";
-				dma-coherent;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
new file mode 100644
index 000000000000..098b73134a1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Manish Narani <manish.narani@xilinx.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xlnx,zynqmp-dwc3
+          - xlnx,versal-dwc3
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  power-domains:
+    description: specifies a phandle to PM domain provider node
+    maxItems: 1
+
+  clocks:
+    description:
+      A list of phandle and clock-specifier pairs for the clocks
+      listed in clock-names.
+    items:
+      - description: Master/Core clock, has to be >= 125 MHz
+          for SS operation and >= 60MHz for HS operation.
+      - description: Clock source to core during PHY power down.
+
+  clock-names:
+    items:
+      - const: bus_clk
+      - const: ref_clk
+
+  resets:
+    description:
+      A list of phandles for resets listed in reset-names.
+
+    items:
+      - description: USB core reset
+      - description: USB hibernation reset
+      - description: USB APB reset
+
+  reset-names:
+    items:
+      - const: usb_crst
+      - const: usb_hibrst
+      - const: usb_apbrst
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - usb2-phy
+        - usb3-phy
+
+  reset-gpios:
+    description: GPIO used for the reset ulpi-phy
+    maxItems: 1
+
+# Required child node:
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - power-domains
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@0 {
+            #address-cells = <0x2>;
+            #size-cells = <0x2>;
+            compatible = "xlnx,zynqmp-dwc3";
+            reg = <0x0 0xff9d0000 0x0 0x100>;
+            clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+            clock-names = "bus_clk", "ref_clk";
+            power-domains = <&zynqmp_firmware PD_USB_0>;
+            resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+                     <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+            reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+            phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+            phy-names = "usb3-phy";
+            ranges;
+
+            usb@fe200000 {
+                compatible = "snps,dwc3";
+                reg = <0x0 0xfe200000 0x0 0x40000>;
+                interrupt-names = "host", "otg";
+                interrupts = <0 65 4>, <0 69 4>;
+                dr_mode = "host";
+                dma-coherent;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt
index 065c91d955ad..d6f2bdee20fc 100644
--- a/Documentation/devicetree/bindings/usb/ehci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
  - resets		: phandle + reset specifier pairs to the powerdown and softreset lines
 			  of the USB IP
  - reset-names		: should be "power" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
deleted file mode 100644
index f7ae79825d7d..000000000000
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-Samsung Exynos SoC USB controller
-
-The USB devices interface with USB controllers on Exynos SOCs.
-The device node has following properties.
-
-EHCI
-Required properties:
- - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
-   EHCI controller in host mode.
- - reg: physical base address of the controller and length of memory mapped
-   region.
- - interrupts: interrupt number to the cpu.
- - clocks: from common clock binding: handle to usb clock.
- - clock-names: from common clock binding: Shall be "usbhost".
- - phys: from the *Generic PHY* bindings; array specifying phy(s) used
-   by the root port.
- - phy-names: from the *Generic PHY* bindings; array of the names for
-   each phy for the root ports, must be a subset of the following:
-   "host", "hsic0", "hsic1".
-
-Optional properties:
- - samsung,vbus-gpio:  if present, specifies the GPIO that
-   needs to be pulled up for the bus to be powered.
-
-Example:
-
-	usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
-		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
-
-		clocks = <&clock 285>;
-		clock-names = "usbhost";
-
-		phys = <&usb2phy 1>;
-		phy-names = "host";
-	};
-
-OHCI
-Required properties:
- - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
-   OHCI companion controller in host mode.
- - reg: physical base address of the controller and length of memory mapped
-   region.
- - interrupts: interrupt number to the cpu.
- - clocks: from common clock binding: handle to usb clock.
- - clock-names: from common clock binding: Shall be "usbhost".
- - phys: from the *Generic PHY* bindings; array specifying phy(s) used
-   by the root port.
- - phy-names: from the *Generic PHY* bindings; array of the names for
-   each phy for the root ports, must be a subset of the following:
-   "host", "hsic0", "hsic1".
-
-Example:
-	usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
-
-		clocks = <&clock 285>;
-		clock-names = "usbhost";
-
-		phys = <&usb2phy 1>;
-		phy-names = "host";
-	};
-
-DWC3
-Required properties:
- - compatible: should be one of the following -
-	       "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
-					    Exynos5250/5420.
-	       "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on
-					    Exynos5433.
-	       "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
- - #address-cells, #size-cells : should be '1' if the device has sub-nodes
-				 with 'reg' property.
- - ranges: allows valid 1:1 translation between child's address space and
-	   parent's address space
- - clocks: Clock IDs array as required by the controller.
- - clock-names: Names of clocks corresponding to IDs in the clock property.
-                Following clock names shall be provided for different
-                compatibles:
-                 - samsung,exynos5250-dwusb3: "usbdrd30",
-                 - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk",
-                                              "phyclk",
-                 - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk",
-                                           "usbdrd30_axius_clk"
- - vdd10-supply: 1.0V powr supply
- - vdd33-supply: 3.0V/3.3V power supply
-
-Sub-nodes:
-The dwc3 core should be added as subnode to Exynos dwc3 glue.
-- dwc3 :
-   The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/snps,dwc3.yaml
-
-Example:
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock 286>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		vdd10-supply = <&ldo11_reg>;
-		vdd33-supply = <&ldo9_reg>;
-
-		dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			usb-phy = <&usb2_phy &usb3_phy>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
deleted file mode 100644
index 06a2286e2054..000000000000
--- a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Faraday FOTG Host controller
-
-This OTG-capable USB host controller is found in Cortina Systems
-Gemini and other SoC products.
-
-Required properties:
-- compatible: should be one of:
-  "faraday,fotg210"
-  "cortina,gemini-usb", "faraday,fotg210"
-- reg: should contain one register range i.e. start and length
-- interrupts: description of the interrupt line
-
-Optional properties:
-- clocks: should contain the IP block clock
-- clock-names: should be "PCLK" for the IP block clock
-
-Required properties for "cortina,gemini-usb" compatible:
-- syscon: a phandle to the system controller to access PHY registers
-
-Optional properties for "cortina,gemini-usb" compatible:
-- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
-  OTG connector is in use
-- wakeup-source: see power/wakeup-source.txt
-
-Example for Gemini:
-
-usb@68000000 {
-	compatible = "cortina,gemini-usb", "faraday,fotg210";
-	reg = <0x68000000 0x1000>;
-	interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cc 12>;
-	clock-names = "PCLK";
-	syscon = <&syscon>;
-	wakeup-source;
-};
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
new file mode 100644
index 000000000000..c69bbfbcf733
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/faraday,fotg210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FOTG210 HS OTG USB 2.0 controller Bindings
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: usb-drd.yaml#
+  - $ref: usb-hcd.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,fotg210
+      - items:
+          - const: cortina,gemini-usb
+          - const: faraday,fotg210
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: PCLK
+
+  resets:
+    maxItems: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller on
+      Gemini systems
+
+  dr_mode: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb2-phy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    usb0: usb@68000000 {
+        compatible = "cortina,gemini-usb", "faraday,fotg210";
+        reg = <0x68000000 0x1000>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&syscon GEMINI_RESET_USB0>;
+        clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+        clock-names = "PCLK";
+        syscon = <&syscon>;
+        dr_mode = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
new file mode 100644
index 000000000000..9473f26b0621
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/fcs,fsa4480.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ON Semiconductor Analog Audio Switch
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa4480
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: power supply (2.7V-5.5V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the FSA4480 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c13 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fsa4480@42 {
+          compatible = "fcs,fsa4480";
+          reg = <0x42>;
+
+          interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+          vcc-supply = <&vreg_bob>;
+
+          mode-switch;
+          orientation-switch;
+
+          port {
+            fsa4480_ept: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index 974032b1fda0..01ab0f922ae8 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -15,9 +15,9 @@ properties:
     const: fsl,imx8mp-dwc3
 
   reg:
-    maxItems: 1
-    description: Address and length of the register set for the wrapper of
-      dwc3 core on the SOC.
+    items:
+      - description: Address and length of the register set for HSIO Block Control
+      - description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
 
   "#address-cells":
     enum: [ 1, 2 ]
@@ -49,6 +49,28 @@ properties:
       - const: hsio
       - const: suspend
 
+  fsl,permanently-attached:
+    type: boolean
+    description:
+      Indicates if the device atached to a downstream port is
+      permanently attached.
+
+  fsl,disable-port-power-control:
+    type: boolean
+    description:
+      Indicates whether the host controller implementation includes port
+      power control. Defines Bit 3 in capability register (HCCPARAMS).
+
+  fsl,over-current-active-low:
+    type: boolean
+    description:
+      Over current signal polarity is active low.
+
+  fsl,power-active-low:
+    type: boolean
+    description:
+      Power pad (PWR) polarity is active low.
+
 # Required child node:
 
 patternProperties:
@@ -74,7 +96,8 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     usb3_0: usb@32f10100 {
       compatible = "fsl,imx8mp-dwc3";
-      reg = <0x32f10100 0x8>;
+      reg = <0x32f10100 0x8>,
+            <0x381f0000 0x20>;
       clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
                <&clk IMX8MP_CLK_USB_ROOT>;
       clock-names = "hsio", "suspend";
diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 8913497624de..c5f629c5bc61 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: USB EHCI Controller Device Tree Bindings
+title: USB EHCI Controller
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -38,6 +38,7 @@ properties:
               - allwinner,sun8i-h3-ehci
               - allwinner,sun8i-r40-ehci
               - allwinner,sun9i-a80-ehci
+              - allwinner,sun20i-d1-ehci
               - aspeed,ast2400-ehci
               - aspeed,ast2500-ehci
               - aspeed,ast2600-ehci
@@ -55,6 +56,7 @@ properties:
               - brcm,bcm7420-ehci
               - brcm,bcm7425-ehci
               - brcm,bcm7435-ehci
+              - hpe,gxp-ehci
               - ibm,476gtr-ehci
               - nxp,lpc1850-ehci
               - qca,ar7100-ehci
@@ -129,13 +131,9 @@ properties:
       Set this flag to indicate that the hardware sometimes turns on
       the OC bit when an over-current isn't actually present.
 
-  companion:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      Phandle of a companion.
-
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
@@ -153,7 +151,7 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index acbf94fa5f74..f838f78d6164 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: USB OHCI Controller Device Tree Bindings
+title: USB OHCI Controller
 
 allOf:
   - $ref: "usb-hcd.yaml"
@@ -28,6 +28,7 @@ properties:
               - allwinner,sun8i-h3-ohci
               - allwinner,sun8i-r40-ohci
               - allwinner,sun9i-a80-ohci
+              - allwinner,sun20i-d1-ohci
               - brcm,bcm3384-ohci
               - brcm,bcm63268-ohci
               - brcm,bcm6328-ohci
@@ -42,6 +43,7 @@ properties:
               - brcm,bcm7420-ohci
               - brcm,bcm7425-ohci
               - brcm,bcm7435-ohci
+              - hpe,gxp-ohci
               - ibm,476gtr-ohci
               - ingenic,jz4740-ohci
               - snps,hsdk-v1.0-ohci
@@ -102,7 +104,8 @@ properties:
       Overrides the detected port count
 
   phys:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   phy-names:
     const: usb
diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
index 23d73df96ea3..db841589fc33 100644
--- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/generic-xhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: USB xHCI Controller Device Tree Bindings
+title: USB xHCI Controller
 
 maintainers:
   - Mathias Nyman <mathias.nyman@intel.com>
diff --git a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
index 43b91ab62004..d3511f48cd55 100644
--- a/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml
@@ -13,6 +13,9 @@ properties:
   compatible:
     const: intel,keembay-dwc3
 
+  reg:
+    maxItems: 1
+
   clocks:
     maxItems: 4
 
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
index 1e8e1c22180e..8db1f8b597c3 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -50,6 +50,11 @@ examples:
       mt6360@34 {
         compatible = "mediatek,mt6360";
         reg = <0x34>;
+        interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "IRQB";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
         tcpc {
           compatible = "mediatek,mt6360-tcpc";
           interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
new file mode 100644
index 000000000000..72f56cc88457
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/mediatek,mt6370-tcpc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediatTek MT6370 Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MediaTek MT6370 is a multi-functional device.
+  It integrates charger, ADC, flash, RGB indicators,
+  regulators (DSV/VIBLDO), and TypeC Port Switch with Power Delivery controller.
+  This document only describes MT6370 Type-C Port Switch and
+  Power Delivery controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-tcpc
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 11f7bacd4e2b..939623867a64 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek USB3 xHCI Device Tree Bindings
+title: MediaTek USB3 xHCI
 
 maintainers:
   - Chunfeng Yun <chunfeng.yun@mediatek.com>
@@ -30,6 +30,8 @@ properties:
           - mediatek,mt7629-xhci
           - mediatek,mt8173-xhci
           - mediatek,mt8183-xhci
+          - mediatek,mt8186-xhci
+          - mediatek,mt8188-xhci
           - mediatek,mt8192-xhci
           - mediatek,mt8195-xhci
       - const: mediatek,mtk-xhci
@@ -56,6 +58,7 @@ properties:
       - description: optional, wakeup interrupt used to support runtime PM
 
   interrupt-names:
+    minItems: 1
     items:
       - const: host
       - const: wakeup
@@ -112,6 +115,9 @@ properties:
   vbus-supply:
     description: Regulator of USB VBUS5v
 
+  resets:
+    maxItems: 1
+
   usb3-lpm-capable: true
 
   usb2-lpm-disable: true
@@ -146,7 +152,11 @@ properties:
             2 - used by mt2712 etc, revision 2 following IPM rule;
             101 - used by mt8183, specific 1.01;
             102 - used by mt8192, specific 1.02;
-          enum: [1, 2, 101, 102]
+            103 - used by mt8195, IP0, specific 1.03;
+            104 - used by mt8195, IP1, specific 1.04;
+            105 - used by mt8195, IP2, specific 1.05;
+            106 - used by mt8195, IP3, specific 1.06;
+          enum: [1, 2, 101, 102, 103, 104, 105, 106]
 
   mediatek,u3p-dis-msk:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 77db1233516e..80750b0f458a 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek USB3 DRD Controller Device Tree Bindings
+title: MediaTek USB3 DRD Controller
 
 maintainers:
   - Chunfeng Yun <chunfeng.yun@mediatek.com>
@@ -24,7 +24,9 @@ properties:
           - mediatek,mt2712-mtu3
           - mediatek,mt8173-mtu3
           - mediatek,mt8183-mtu3
+          - mediatek,mt8188-mtu3
           - mediatek,mt8192-mtu3
+          - mediatek,mt8195-mtu3
       - const: mediatek,mtu3
 
   reg:
@@ -106,6 +108,9 @@ properties:
   maximum-speed:
     enum: [super-speed-plus, super-speed, high-speed, full-speed]
 
+  resets:
+    maxItems: 1
+
   "#address-cells":
     enum: [1, 2]
 
@@ -132,7 +137,7 @@ properties:
     default: host
 
   connector:
-    $ref: /connector/usb-connector.yaml#
+    $ref: /schemas/connector/usb-connector.yaml#
     description:
       Connector for dual role switch, especially for "gpio-usb-b-connector"
     type: object
@@ -191,7 +196,7 @@ properties:
 patternProperties:
   "^usb@[0-9a-f]+$":
     type: object
-    $ref: /usb/mediatek,mtk-xhci.yaml#
+    $ref: /schemas/usb/mediatek,mtk-xhci.yaml#
     description:
       The xhci should be added as subnode to mtu3 as shown in the following
       example if the host mode is enabled.
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
index 03d62d60ce5f..f16ab30a95d2 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/usb/mediatek,musb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek MUSB DRD/OTG Controller Device Tree Bindings
+title: MediaTek MUSB DRD/OTG Controller
 
 maintainers:
   - Min Guo <min.guo@mediatek.com>
@@ -63,7 +63,7 @@ properties:
     maxItems: 1
 
   connector:
-    $ref: /connector/usb-connector.yaml#
+    $ref: /schemas/connector/usb-connector.yaml#
     description: Connector for dual role switch
     type: object
 
diff --git a/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
new file mode 100644
index 000000000000..c5e9ce2e7bc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/microchip,mpfs-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS USB Controller
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpfs-musb
+
+  dr_mode: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: dma
+      - const: mc
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/microchip,mpfs-clock.h"
+    usb@20201000 {
+        compatible = "microchip,mpfs-musb";
+        reg = <0x20201000 0x1000>;
+        clocks = <&clkcfg CLK_USB>;
+        interrupt-parent = <&plic>;
+        interrupts = <86>, <87>;
+        interrupt-names = "dma", "mc";
+        dr_mode = "host";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
index 5a0f1f14fbfa..352a0a1e2f76 100644
--- a/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/npcm7xx-usb.txt
@@ -5,7 +5,9 @@ EHCI:
 -----
 
 Required properties:
-- compatible: "nuvoton,npcm750-ehci"
+- compatible: should be one of
+    "nuvoton,npcm750-ehci"
+    "nuvoton,npcm845-ehci"
 - interrupts: Should contain the EHCI interrupt
 - reg:        Physical address and length of the register set for the device
 
diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
index a39c76b89484..fd6e7c81426e 100644
--- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
+++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
@@ -83,7 +83,7 @@ properties:
       - const: ss
 
   nvidia,xusb-padctl:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to the XUSB pad controller that is used to configure the USB pads
       used by the XUDC controller.
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt
index 44c998c16f85..1c735573abc0 100644
--- a/Documentation/devicetree/bindings/usb/ohci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 
  - resets		: phandle to the powerdown and reset controller for the USB IP
  - reset-names		: should be "power" and "softreset".
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 2bdaba023c01..a6e6abb4dfa9 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -7,25 +7,38 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm SuperSpeed DWC3 USB SoC controller
 
 maintainers:
-  - Manu Gautam <mgautam@codeaurora.org>
+  - Wesley Cheng <quic_wcheng@quicinc.com>
 
 properties:
   compatible:
     items:
       - enum:
+          - qcom,ipq4019-dwc3
           - qcom,ipq6018-dwc3
+          - qcom,ipq8064-dwc3
+          - qcom,ipq8074-dwc3
+          - qcom,msm8953-dwc3
+          - qcom,msm8994-dwc3
           - qcom,msm8996-dwc3
           - qcom,msm8998-dwc3
+          - qcom,qcs404-dwc3
           - qcom,sc7180-dwc3
           - qcom,sc7280-dwc3
+          - qcom,sc8280xp-dwc3
           - qcom,sdm660-dwc3
+          - qcom,sdm670-dwc3
           - qcom,sdm845-dwc3
           - qcom,sdx55-dwc3
+          - qcom,sdx65-dwc3
           - qcom,sm4250-dwc3
           - qcom,sm6115-dwc3
+          - qcom,sm6125-dwc3
+          - qcom,sm6350-dwc3
+          - qcom,sm6375-dwc3
           - qcom,sm8150-dwc3
           - qcom,sm8250-dwc3
           - qcom,sm8350-dwc3
+          - qcom,sm8450-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -45,26 +58,22 @@ properties:
     maxItems: 1
 
   clocks:
-    description:
-      A list of phandle and clock-specifier pairs for the clocks
-      listed in clock-names.
-    items:
-      - description: System Config NOC clock.
-      - description: Master/Core clock, has to be >= 125 MHz
-          for SS operation and >= 60MHz for HS operation.
-      - description: System bus AXI clock.
-      - description: Mock utmi clock needed for ITP/SOF generation
-          in host mode. Its frequency should be 19.2MHz.
-      - description: Sleep clock, used for wakeup when
-          USB3 core goes into low power mode (U3).
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - cfg_noc:: System Config NOC clock.
+       - core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
+                60MHz for HS operation.
+       - iface:: System bus AXI clock.
+       - sleep:: Sleep clock, used for wakeup when USB3 core goes into low
+                 power mode (U3).
+       - mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
+                     mode. Its frequency should be 19.2MHz.
+    minItems: 1
+    maxItems: 9
 
   clock-names:
-    items:
-      - const: cfg_noc
-      - const: core
-      - const: iface
-      - const: mock_utmi
-      - const: sleep
+    minItems: 1
+    maxItems: 9
 
   assigned-clocks:
     items:
@@ -87,20 +96,12 @@ properties:
       - const: apps-usb
 
   interrupts:
-    items:
-      - description: The interrupt that is asserted
-          when a wakeup event is received on USB2 bus.
-      - description: The interrupt that is asserted
-          when a wakeup event is received on USB3 bus.
-      - description: Wakeup event on DM line.
-      - description: Wakeup event on DP line.
+    minItems: 1
+    maxItems: 4
 
   interrupt-names:
-    items:
-      - const: hs_phy_irq
-      - const: ss_phy_irq
-      - const: dm_hs_phy_irq
-      - const: dp_hs_phy_irq
+    minItems: 1
+    maxItems: 4
 
   qcom,select-utmi-as-pipe-clk:
     description:
@@ -109,12 +110,17 @@ properties:
       HS/FS/LS modes are supported.
     type: boolean
 
+  wakeup-source: true
+
 # Required child node:
 
 patternProperties:
   "^usb@[0-9a-f]+$":
     $ref: snps,dwc3.yaml#
 
+    properties:
+      wakeup-source: false
+
 required:
   - compatible
   - reg
@@ -127,6 +133,319 @@ required:
   - interrupts
   - interrupt-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8064-dwc3
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Master/Core clock, has to be >= 125 MHz
+                for SS operation and >= 60MHz for HS operation.
+        clock-names:
+          items:
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sc7280-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sm6350-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          oneOf:
+            - items:
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+            - items:
+                - const: cfg_noc
+                - const: core
+                - const: sleep
+                - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+    then:
+      properties:
+        clocks:
+          maxItems: 9
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: noc_aggr
+            - const: noc_aggr_north
+            - const: noc_aggr_south
+            - const: noc_sys
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6115-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8450-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8350-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 6
+        clock-names:
+          minItems: 5
+          items:
+            - const: cfg_noc
+            - const: core
+            - const: iface
+            - const: sleep
+            - const: mock_utmi
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-dwc3
+              - qcom,ipq6018-dwc3
+              - qcom,ipq8064-dwc3
+              - qcom,ipq8074-dwc3
+              - qcom,msm8994-dwc3
+              - qcom,qcs404-dwc3
+              - qcom,sc7180-dwc3
+              - qcom,sdm670-dwc3
+              - qcom,sdm845-dwc3
+              - qcom,sdx55-dwc3
+              - qcom,sdx65-dwc3
+              - qcom,sm4250-dwc3
+              - qcom,sm6125-dwc3
+              - qcom,sm6350-dwc3
+              - qcom,sm8150-dwc3
+              - qcom,sm8250-dwc3
+              - qcom,sm8350-dwc3
+              - qcom,sm8450-dwc3
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: The interrupt that is asserted
+                when a wakeup event is received on USB2 bus.
+            - description: The interrupt that is asserted
+                when a wakeup event is received on USB3 bus.
+            - description: Wakeup event on DM line.
+            - description: Wakeup event on DP line.
+        interrupt-names:
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+            - const: dm_hs_phy_irq
+            - const: dp_hs_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dwc3
+              - qcom,msm8996-dwc3
+              - qcom,msm8998-dwc3
+              - qcom,sm6115-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-dwc3
+    then:
+      properties:
+        interrupts:
+          minItems: 3
+          maxItems: 4
+        interrupt-names:
+          minItems: 3
+          items:
+            - const: hs_phy_irq
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+            - const: ss_phy_irq
+
 additionalProperties: false
 
 examples:
@@ -148,10 +467,13 @@ examples:
             clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
                      <&gcc GCC_USB30_PRIM_MASTER_CLK>,
                      <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-                     <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-                     <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
-            clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-                      "sleep";
+                     <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+                     <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+            clock-names = "cfg_noc",
+                          "core",
+                          "iface",
+                          "sleep",
+                          "mock_utmi";
 
             assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
index 04ee255eb4f0..50f2b505bdeb 100644
--- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
+++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
@@ -25,13 +25,13 @@ properties:
     description:
       phandle to the regulator that provides power to the hub.
 
-  companion-hub:
+  peer-hub:
     $ref: '/schemas/types.yaml#/definitions/phandle'
     description:
-      phandle to the companion hub on the controller.
+      phandle to the peer hub on the controller.
 
 required:
-  - companion-hub
+  - peer-hub
   - compatible
   - reg
 
@@ -49,7 +49,7 @@ examples:
             compatible = "usbbda,5411";
             reg = <1>;
             vdd-supply = <&pp3300_hub>;
-            companion-hub = <&hub_3_0>;
+            peer-hub = <&hub_3_0>;
         };
 
         /* 3.0 hub on port 2 */
@@ -57,6 +57,6 @@ examples:
             compatible = "usbbda,411";
             reg = <2>;
             vdd-supply = <&pp3300_hub>;
-            companion-hub = <&hub_2_0>;
+            peer-hub = <&hub_2_0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
index 9fcf54b10b07..55dfd121b555 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -11,27 +11,55 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r8a774a1-usb3-peri # RZ/G2M
-          - renesas,r8a774b1-usb3-peri # RZ/G2N
-          - renesas,r8a774c0-usb3-peri # RZ/G2E
-          - renesas,r8a774e1-usb3-peri # RZ/G2H
-          - renesas,r8a7795-usb3-peri  # R-Car H3
-          - renesas,r8a7796-usb3-peri  # R-Car M3-W
-          - renesas,r8a77961-usb3-peri # R-Car M3-W+
-          - renesas,r8a77965-usb3-peri # R-Car M3-N
-          - renesas,r8a77990-usb3-peri # R-Car E3
-      - const: renesas,rcar-gen3-usb3-peri
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-usb3-peri # RZ/G2M
+              - renesas,r8a774b1-usb3-peri # RZ/G2N
+              - renesas,r8a774c0-usb3-peri # RZ/G2E
+              - renesas,r8a774e1-usb3-peri # RZ/G2H
+              - renesas,r8a7795-usb3-peri  # R-Car H3
+              - renesas,r8a7796-usb3-peri  # R-Car M3-W
+              - renesas,r8a77961-usb3-peri # R-Car M3-W+
+              - renesas,r8a77965-usb3-peri # R-Car M3-N
+              - renesas,r8a77990-usb3-peri # R-Car E3
+          - const: renesas,rcar-gen3-usb3-peri
+
+      - items:
+          - enum:
+              - renesas,r9a09g011-usb3-peri # RZ/V2M
+          - const: renesas,rzv2m-usb3-peri
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Combined interrupt for DMA, SYS and ERR
+      - description: Dual Role Device (DRD)
+      - description: Battery Charging
+      - description: Global Purpose Input
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: all_p
+      - const: drd
+      - const: bc
+      - const: gpi
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: aclk
+      - const: reg
 
   phys:
     maxItems: 1
@@ -43,7 +71,15 @@ properties:
     maxItems: 1
 
   resets:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Peripheral reset
+      - description: DRD reset
+
+  reset-names:
+    items:
+      - const: aresetn_p
+      - const: drd_reset
 
   usb-role-switch:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -78,6 +114,39 @@ required:
   - interrupts
   - clocks
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzv2m-usb3-peri
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        resets:
+          minItems: 2
+      required:
+        - clock-names
+        - interrupt-names
+        - resets
+        - reset-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        interrupts:
+          maxItems: 1
+        resets:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
index 012fe80a7611..bad55dfb2fa0 100644
--- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
+++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml
@@ -19,7 +19,9 @@ properties:
       - items:
           - enum:
               - renesas,usbhs-r7s9210   # RZ/A2
+              - renesas,usbhs-r9a07g043 # RZ/G2UL
               - renesas,usbhs-r9a07g044 # RZ/G2{L,LC}
+              - renesas,usbhs-r9a07g054 # RZ/V2L
           - const: renesas,rza2-usbhs
 
       - items:
@@ -116,7 +118,10 @@ allOf:
       properties:
         compatible:
           contains:
-            const: renesas,usbhs-r9a07g044
+            enum:
+              - renesas,usbhs-r9a07g043
+              - renesas,usbhs-r9a07g044
+              - renesas,usbhs-r9a07g054
     then:
       properties:
         interrupts:
@@ -125,6 +130,8 @@ allOf:
             - description: U2P_INT_DMA[0]
             - description: U2P_INT_DMA[1]
             - description: U2P_INT_DMAERR
+      required:
+        - resets
     else:
       properties:
         interrupts:
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
new file mode 100644
index 000000000000..1999f614c89b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1711H Type-C Port Switch and Power Delivery controller
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  The RT1711H is a USB Type-C controller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1711h
+      - richtek,rt1715
+    description:
+      RT1711H support PD20, RT1715 support PD30 except Fast Role Swap.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1711h@4e {
+        compatible = "richtek,rt1711h";
+        reg = <0x4e>;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          data-role = "dual";
+          power-role = "dual";
+          try-power-role = "sink";
+          source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+          op-sink-microwatt = <10000000>;
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+            port@2 {
+              reg = <2>;
+              endpoint {
+                remote-endpoint = <&dp_aux>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
new file mode 100644
index 000000000000..65a93f7738d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1719.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1719 sink-only Type-C PD controller bindings
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT1719 is a sink-only USB Type-C contoller that complies with the latest
+  USB Type-C and PD standards. It does the USB Type-C detection including attach
+  and orientation. It integrates the physical layer of the USB BMC power
+  delivery protocol to allow up to 100W of power. The BMC PD block enables full
+  support for alternative interfaces of the Type-C specification.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt1719
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    description: enable IRQ remote wakeup, see power/wakeup-source.txt
+    type: boolean
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    description:
+      Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - connector
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rt1719@43 {
+        compatible = "richtek,rt1719";
+        reg = <0x43>;
+        interrupts-extended = <&gpio26 2 IRQ_TYPE_LEVEL_LOW>;
+        wakeup-source;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+              reg = <0>;
+              endpoint {
+                remote-endpoint = <&usb_hs>;
+              };
+            };
+            port@1 {
+              reg = <1>;
+              endpoint {
+                remote-endpoint = <&usb_ss>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
index 04077f2d7faf..b3798d94d2fd 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml
@@ -30,6 +30,7 @@ select:
         enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
   required:
     - compatible
 
@@ -39,6 +40,7 @@ properties:
       - enum:
           - rockchip,rk3328-dwc3
           - rockchip,rk3399-dwc3
+          - rockchip,rk3568-dwc3
       - const: snps,dwc3
 
   reg:
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
new file mode 100644
index 000000000000..6b9a3bcb3926
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 3.0 DWC3 Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5250-dwusb3
+      - samsung,exynos5433-dwusb3
+      - samsung,exynos7-dwusb3
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  ranges: true
+
+  '#size-cells':
+    const: 1
+
+  vdd10-supply:
+    description: 1.0V power supply
+
+  vdd33-supply:
+    description: 3.0V/3.3V power supply
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - '#size-cells'
+  - vdd10-supply
+  - vdd33-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: usbdrd30
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos54333-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: susp_clk
+            - const: pipe_pclk
+            - const: phyclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: usbdrd30
+            - const: usbdrd30_susp_clk
+            - const: usbdrd30_axius_clk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "samsung,exynos5250-dwusb3";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        clocks = <&clock CLK_USBD300>;
+        clock-names = "usbdrd30";
+        vdd33-supply = <&ldo9_reg>;
+        vdd10-supply = <&ldo11_reg>;
+
+        usb@12000000 {
+            compatible = "snps,dwc3";
+            reg = <0x12000000 0x10000>;
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+            phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+            phy-names = "usb2-phy", "usb3-phy";
+            snps,dis_u3_susphy_quirk;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
new file mode 100644
index 000000000000..caa572dcee02
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/samsung,exynos-usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC USB 2.0 EHCI/OHCI Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-ehci
+      - samsung,exynos4210-ohci
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: usbhost
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  phy-names:
+    items:
+      enum: [host, hsic0, hsic1]
+    minItems: 1
+    maxItems: 3
+
+  reg:
+    maxItems: 1
+
+  samsung,vbus-gpio:
+    description:
+      Only for controller in EHCI mode, if present, specifies the GPIO that
+      needs to be pulled up for the bus to be powered.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+  - reg
+
+allOf:
+  - $ref: usb-hcd.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-ohci
+    then:
+      properties:
+        samsung,vbus-gpio: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@12110000 {
+        compatible = "samsung,exynos4210-ehci";
+        reg = <0x12110000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub@1 {
+            compatible = "usb0424,9514";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            usbether@1 {
+                compatible = "usb0424,ec00";
+                reg = <1>;
+                local-mac-address = [00 00 00 00 00 00];
+            };
+        };
+    };
+
+    usb@12120000 {
+        compatible = "samsung,exynos4210-ohci";
+        reg = <0x12120000 0x100>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_USBH20>;
+        clock-names = "usbhost";
+        phys = <&usb2_phy 0>;
+        phy-names = "host";
+    };
diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
index 39228a506b93..a09f4528aea3 100644
--- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
+++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/smsc,usb3503.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SMSC USB3503 High-Speed Hub Controller Device Tree Bindings
+title: SMSC USB3503 High-Speed Hub Controller
 
 maintainers:
   - Dongjin Kim <tobetter@gmail.com>
@@ -45,6 +45,7 @@ properties:
       property if all ports have to be enabled.
 
   initial-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2]
     description: >
       Specifies initial mode. 1 for Hub mode, 2 for standby mode.
@@ -77,7 +78,7 @@ examples:
       i2c {
           #address-cells = <1>;
           #size-cells = <0>;
-        
+
           usb-hub@8 {
               compatible = "smsc,usb3503";
               reg = <0x08>;
diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 25ac2c93dc6c..6d78048c4613 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -36,6 +36,9 @@ properties:
         - const: synopsys,dwc3
           deprecated: true
 
+  reg:
+    maxItems: 1
+
   interrupts:
     description:
       It's either a single common DWC3 interrupt (dwc_usb3) or individual
@@ -65,6 +68,11 @@ properties:
         - enum: [bus_early, ref, suspend]
         - true
 
+  dma-coherent: true
+
+  iommus:
+    maxItems: 1
+
   usb-phy:
     minItems: 1
     items:
@@ -226,6 +234,18 @@ properties:
       avoid -EPROTO errors with usbhid on some devices (Hikey 970).
     type: boolean
 
+  snps,gfladj-refclk-lpm-sel-quirk:
+    description:
+      When set, run the SOF/ITP counter based on ref_clk.
+    type: boolean
+
+  snps,resume-hs-terminations:
+    description:
+      Fix the issue of HS terminations CRC error on resume by enabling this
+      quirk. When set, all the termsel, xcvrsel, opmode becomes 0 during end
+      of resume. This option is to support certain legacy ULPI PHYs.
+    type: boolean
+
   snps,is-utmi-l1-suspend:
     description:
       True when DWC3 asserts output signal utmi_l1_suspend_n, false when
@@ -257,8 +277,11 @@ properties:
       Value for REFCLKPER field of GUCTL register for reference clock period in
       nanoseconds, when the hardware set default does not match the actual
       clock.
-    minimum: 1
-    maximum: 0x3ff
+
+      This binding is deprecated. Instead, provide an appropriate reference clock.
+    minimum: 8
+    maximum: 62
+    deprecated: true
 
   snps,rx-thr-num-pkt-prd:
     description:
@@ -326,6 +349,17 @@ properties:
     items:
       enum: [1, 4, 8, 16, 32, 64, 128, 256]
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      This port is used with the 'usb-role-switch' property  to connect the
+      dwc3 to type C connector.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable USB remote wakeup.
+
 unevaluatedProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index ead1571e0e43..b8974807b666 100644
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -32,9 +32,8 @@ properties:
 
   connector:
     type: object
-
-    allOf:
-      - $ref: ../connector/usb-connector.yaml
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -76,9 +75,14 @@ examples:
                 data-role = "dual";
                 typec-power-opmode = "default";
 
-                port {
-                    typec_con_ep: endpoint {
-                        remote-endpoint = <&usbotg_hs_ep>;
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    port@0 {
+                        reg = <0>;
+                        typec_con_ep: endpoint {
+                            remote-endpoint = <&usbotg_hs_ep>;
+                        };
                     };
                 };
             };
diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
new file mode 100644
index 000000000000..1cb68cabe17d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32G0 USB Type-C PD controller
+
+description: |
+  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
+  typically using the UCSI protocol over I2C, with a dedicated alert
+  (interrupt) pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stm32g0-typec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  firmware-name:
+    description: |
+      Should contain the name of the default firmware image
+      file located on the firmware search path
+
+  wakeup-source: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      typec@53 {
+        compatible = "st,stm32g0-typec";
+        reg = <0x53>;
+        /* Alert pin on GPIO PE12 */
+        interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpioe>;
+
+        /* Example with one type-C connector */
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+
+          ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+              reg = <0>;
+              con_usb_c_ep: endpoint {
+                remote-endpoint = <&usb_ep>;
+              };
+            };
+          };
+        };
+      };
+    };
+
+    usb {
+      usb-role-switch;
+      port {
+        usb_ep: endpoint {
+          remote-endpoint = <&con_usb_c_ep>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
new file mode 100644
index 000000000000..d25fc708e32c
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,am62-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's AM62 wrapper module for the Synopsys USBSS-DRD controller
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    const: ti,am62-usb
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  power-domains:
+    description:
+      PM domain provider node and an args specifier containing
+      the USB ISO device id value. See,
+      Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+    maxItems: 1
+
+  clocks:
+    description: Clock phandle to usb2_refclk
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+  ti,vbus-divider:
+    description:
+      Should be present if USB VBUS line is connected to the
+      VBUS pin of the SoC via a 1/3 voltage divider.
+    type: boolean
+
+  ti,syscon-phy-pll-refclk:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: USB phy control register offset within SYSCON
+    description:
+      Specifier for conveying frequency of ref clock input, for the
+      operation of USB2PHY.
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    $ref: snps,dwc3.yaml#
+    description: Required child node
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - clock-names
+  - ti,syscon-phy-pll-refclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      usbss1: usb@f910000 {
+        compatible = "ti,am62-usb";
+        reg = <0x00 0x0f910000 0x00 0x800>;
+        clocks = <&k3_clks 162 3>;
+        clock-names = "ref";
+        ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+        power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@31100000 {
+          compatible = "snps,dwc3";
+          reg =<0x00 0x31100000 0x00 0x50000>;
+          interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+                       <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+          interrupt-names = "host", "peripheral";
+          maximum-speed = "high-speed";
+          dr_mode = "otg";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
index a634774c537c..eedde385d299 100644
--- a/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml
@@ -7,7 +7,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Bindings for the TI wrapper module for the Cadence USBSS-DRD controller
 
 maintainers:
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
index f6e91a5fd8fe..c1f0194ad0d5 100644
--- a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI Keystone Soc USB Controller
 
 maintainers:
-  - Roger Quadros <rogerq@ti.com>
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:
@@ -92,7 +92,7 @@ examples:
       ranges;
 
       usb@2690000 {
-        compatible = "synopsys,dwc3";
+        compatible = "snps,dwc3";
         reg = <0x2690000 0x70000>;
         interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
         usb-phy = <&usb_phy>, <&usb_phy>;
diff --git a/Documentation/devicetree/bindings/usb/ti,usb8041.yaml b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
new file mode 100644
index 000000000000..e04fbd8ab0b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,usb8041.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,usb8041.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for the TI USB8041 USB 3.0 hub controller
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb451,8140
+      - usb451,8142
+
+  reg: true
+
+  reset-gpios:
+    items:
+      - description: GPIO specifier for GRST# pin.
+
+  vdd-supply:
+    description:
+      VDD power supply to the hub
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the peer hub on the controller.
+
+required:
+  - compatible
+  - reg
+  - peer-hub
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+          compatible = "usb451,8142";
+          reg = <1>;
+          peer-hub = <&hub_3_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+        };
+
+        /* 3.0 hub on port 2 */
+        hub_3_0: hub@2 {
+          compatible = "usb451,8140";
+          reg = <2>;
+          peer-hub = <&hub_2_0>;
+          reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/usb/usb-drd.yaml b/Documentation/devicetree/bindings/usb/usb-drd.yaml
index f229fc8068d9..1567549b05ce 100644
--- a/Documentation/devicetree/bindings/usb/usb-drd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-drd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/usb-drd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic USB OTG Controller Device Tree Bindings
+title: Generic USB OTG Controller
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 56853c17af66..692dd60e3f73 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/usb-hcd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic USB Host Controller Device Tree Bindings
+title: Generic USB Host Controller
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -33,7 +33,7 @@ patternProperties:
   "^.*@[0-9a-f]{1,2}$":
     description: The hard wired USB devices
     type: object
-    $ref: /usb/usb-device.yaml
+    $ref: /schemas/usb/usb-device.yaml
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.yaml b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
index 965f87fef702..f2139a9f35fb 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/usb-xhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic USB xHCI Controller Device Tree Bindings
+title: Generic USB xHCI Controller
 
 maintainers:
   - Mathias Nyman <mathias.nyman@intel.com>
diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml
index 939f217b8c7b..326b14f05d1c 100644
--- a/Documentation/devicetree/bindings/usb/usb.yaml
+++ b/Documentation/devicetree/bindings/usb/usb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/usb/usb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic USB Controller Device Tree Bindings
+title: Generic USB Controller
 
 maintainers:
   - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
new file mode 100644
index 000000000000..5aa4ffd67119
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/willsemi,wusb3801.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/willsemi,wusb3801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WUSB3801 Type-C port controller DT bindings
+
+description:
+  The Will Semiconductor WUSB3801 is a USB Type-C port controller which
+  supports role and plug orientation detection using the CC pins. It is
+  compatible with the USB Type-C Cable and Connector Specification v1.2.
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+properties:
+  compatible:
+    enum:
+      - willsemi,wusb3801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    type: object
+    $ref: ../connector/usb-connector.yaml#
+    unevaluatedProperties: false
+    description:
+      The managed USB Type-C connector. Since WUSB3801 does not support
+      Power Delivery, the node should have the "pd-disable" property.
+
+    properties:
+      compatible:
+        const: usb-c-connector
+
+    required:
+      - pd-disable
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      tcpc@60 {
+        compatible = "willsemi,wusb3801";
+        reg = <0x60>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+        connector {
+          compatible = "usb-c-connector";
+          label = "USB-C";
+          vbus-supply = <&otg_switch>;
+          power-role = "dual";
+          try-power-role = "sink";
+          data-role = "dual";
+          typec-power-opmode = "default";
+          pd-disable;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ae2aaaba620a..6e323a380294 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -23,8 +23,12 @@ patternProperties:
   "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
 
   # Keep list in alphabetical order.
+  "^100ask,.*":
+    description: Baiwen.com (100ask).
   "^70mai,.*":
     description: 70mai Co., Ltd.
+  "^8dev,.*":
+    description: 8devices, UAB
   "^abb,.*":
     description: ABB
   "^abilis,.*":
@@ -59,6 +63,8 @@ patternProperties:
     description: Aeroflex Gaisler AB
   "^aesop,.*":
     description: AESOP Embedded Forum
+  "^airoha,.*":
+    description: Airoha
   "^al,.*":
     description: Annapurna Labs
   "^alcatel,.*":
@@ -99,6 +105,8 @@ patternProperties:
     description: AMS-Taos Inc.
   "^analogix,.*":
     description: Analogix Semiconductor, Inc.
+  "^anbernic,.*":
+    description: Anbernic
   "^andestech,.*":
     description: Andes Technology Corporation
   "^anvo,.*":
@@ -135,8 +143,13 @@ patternProperties:
     description: ASIX Electronics Corporation
   "^aspeed,.*":
     description: ASPEED Technology Inc.
+  "^asrock,.*":
+    description: ASRock Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
+  "^atheros,.*":
+    description: Qualcomm Atheros, Inc. (deprecated, use qca)
+    deprecated: true
   "^atlas,.*":
     description: Atlas Scientific LLC
   "^atmel,.*":
@@ -189,12 +202,14 @@ patternProperties:
     description: Broadcom Corporation
   "^bsh,.*":
     description: BSH Hausgeraete GmbH
+  "^bticino,.*":
+    description: Bticino International
   "^buffalo,.*":
     description: Buffalo, Inc.
   "^bur,.*":
     description: B&R Industrial Automation GmbH
-  "^bticino,.*":
-    description: Bticino International
+  "^bytedance,.*":
+    description: ByteDance Ltd.
   "^calamp,.*":
     description: CalAmp Corp.
   "^calaosystems,.*":
@@ -275,12 +290,18 @@ patternProperties:
     description: Hangzhou C-SKY Microsystems Co., Ltd
   "^csq,.*":
     description: Shenzen Chuangsiqi Technology Co.,Ltd.
+  "^ctera,.*":
+    description: CTERA Networks Intl.
+  "^ctu,.*":
+    description: Czech Technical University in Prague
   "^cubietech,.*":
     description: Cubietech, Ltd.
   "^cui,.*":
     description: CUI Devices
   "^cypress,.*":
     description: Cypress Semiconductor Corporation
+  "^cyx,.*":
+    description: Shenzhen CYX Industrial Co., Ltd
   "^cznic,.*":
     description: CZ.NIC, z.s.p.o.
   "^dallas,.*":
@@ -293,6 +314,8 @@ patternProperties:
     description: Dell Inc.
   "^delta,.*":
     description: Delta Electronics, Inc.
+  "^densitron,.*":
+    description: Densitron Technologies Ltd
   "^denx,.*":
     description: Denx Software Engineering
   "^devantech,.*":
@@ -307,6 +330,8 @@ patternProperties:
     description: Digi International Inc.
   "^digilent,.*":
     description: Diglent, Inc.
+  "^diodes,.*":
+    description: Diodes, Inc.
   "^dioo,.*":
     description: Dioo Microcircuit Co., Ltd
   "^dlc,.*":
@@ -335,6 +360,8 @@ patternProperties:
     description: Embedded Artists AB
   "^ebang,.*":
     description: Zhejiang Ebang Communication Co., Ltd
+  "^ebbg,.*":
+    description: EBBG
   "^ebs-systart,.*":
     description: EBS-SYSTART GmbH
   "^ebv,.*":
@@ -373,6 +400,8 @@ patternProperties:
     description: Empire Electronix
   "^emtrion,.*":
     description: emtrion GmbH
+  "^enclustra,.*":
+    description: Enclustra GmbH
   "^endless,.*":
     description: Endless Mobile, Inc.
   "^ene,.*":
@@ -441,6 +470,8 @@ patternProperties:
     description: Freescale Semiconductor
   "^fujitsu,.*":
     description: Fujitsu Ltd.
+  "^fxtec,.*":
+    description: FX Technology Ltd.
   "^gardena,.*":
     description: GARDENA GmbH
   "^gateworks,.*":
@@ -485,16 +516,23 @@ patternProperties:
     deprecated: true
   "^hannstar,.*":
     description: HannStar Display Corporation
+  "^haochuangyi,.*":
+    description: Shenzhen Haochuangyi Technology Co.,Ltd
   "^haoyu,.*":
     description: Haoyu Microelectronic Co. Ltd.
   "^hardkernel,.*":
     description: Hardkernel Co., Ltd
+  "^hechuang,.*":
+    description: Shenzhen Hechuang Intelligent Co.
   "^hideep,.*":
     description: HiDeep Inc.
   "^himax,.*":
     description: Himax Technologies, Inc.
   "^hirschmann,.*":
     description: Hirschmann Automation and Control GmbH
+  "^hisi,.*":
+    description: HiSilicon Limited (deprecated, use hisilicon)
+    deprecated: true
   "^hisilicon,.*":
     description: HiSilicon Limited.
   "^hit,.*":
@@ -510,15 +548,21 @@ patternProperties:
   "^hoperun,.*":
     description: Jiangsu HopeRun Software Co., Ltd.
   "^hp,.*":
-    description: Hewlett Packard
+    description: Hewlett Packard Inc.
+  "^hpe,.*":
+    description: Hewlett Packard Enterprise
   "^hsg,.*":
     description: HannStar Display Co.
   "^holtek,.*":
     description: Holtek Semiconductor, Inc.
+  "^huawei,.*":
+    description: Huawei Technologies Co., Ltd.
   "^hugsun,.*":
     description: Shenzhen Hugsun Technology Co. Ltd.
   "^hwacom,.*":
     description: HwaCom Systems Inc.
+  "^hxt,.*":
+    description: HXT Semiconductor
   "^hycon,.*":
     description: Hycon Technology Corp.
   "^hydis,.*":
@@ -539,6 +583,8 @@ patternProperties:
     description: Ingenieurburo Fur Ic-Technologie (I/F/I)
   "^ilitek,.*":
     description: ILI Technology Corporation (ILITEK)
+  "^imagis,.*":
+    description: Imagis Technologies Co., Ltd.
   "^img,.*":
     description: Imagination Technologies Ltd.
   "^imi,.*":
@@ -551,10 +597,14 @@ patternProperties:
     description: Infineon Technologies
   "^inforce,.*":
     description: Inforce Computing
+  "^ingrasys,.*":
+    description: Ingrasys Technology Inc.
   "^ivo,.*":
     description: InfoVision Optoelectronics Kunshan Co. Ltd.
   "^ingenic,.*":
     description: Ingenic Semiconductor
+  "^injoinic,.*":
+    description: Injoinic Technology Corp.
   "^innolux,.*":
     description: Innolux Corporation
   "^inside-secure,.*":
@@ -569,6 +619,8 @@ patternProperties:
     description: Inter Control Group
   "^invensense,.*":
     description: InvenSense Inc.
+  "^inventec,.*":
+    description: Inventec
   "^inversepath,.*":
     description: Inverse Path
   "^iom,.*":
@@ -729,6 +781,8 @@ patternProperties:
     description: MELFAS Inc.
   "^mellanox,.*":
     description: Mellanox Technologies
+  "^memsensing,.*":
+    description: MEMSensing Microsystems Co., Ltd.
   "^memsic,.*":
     description: MEMSIC Inc.
   "^menlo,.*":
@@ -739,6 +793,8 @@ patternProperties:
     description: Cisco Meraki, LLC
   "^merrii,.*":
     description: Merrii Technology Co., Ltd.
+  "^methode,.*":
+    description: Methode Electronics, Inc.
   "^micrel,.*":
     description: Micrel Inc.
   "^microchip,.*":
@@ -763,10 +819,16 @@ patternProperties:
     description: MiraMEMS Sensing Technology Co., Ltd.
   "^mitsubishi,.*":
     description: Mitsubishi Electric Corporation
+  "^mixel,.*":
+    description: Mixel, Inc.
+  "^miyoo,.*":
+    description: Miyoo
   "^mntre,.*":
     description: MNT Research GmbH
   "^modtronix,.*":
     description: Modtronix Engineering
+  "^moortec,.*":
+    description: Moortec Semiconductor Ltd.
   "^mosaixtech,.*":
     description: Mosaix Technologies, Inc.
   "^motorola,.*":
@@ -796,6 +858,9 @@ patternProperties:
     description: Mundo Reader S.L.
   "^murata,.*":
     description: Murata Manufacturing Co., Ltd.
+  "^mxic,.*":
+    description: Macronix International Co., Ltd.
+    deprecated: true
   "^mxicy,.*":
     description: Macronix International Co., Ltd.
   "^myir,.*":
@@ -848,6 +913,8 @@ patternProperties:
     description: NXP Semiconductors
   "^oceanic,.*":
     description: Oceanic Systems (UK) Ltd.
+  "^ocs,.*":
+    description: Orient Chip Technology Co., Ltd.
   "^oct,.*":
     description: Octavo Systems LLC
   "^okaya,.*":
@@ -858,6 +925,8 @@ patternProperties:
     description: OLIMEX Ltd.
   "^olpc,.*":
     description: One Laptop Per Child
+  "^oneplus,.*":
+    description: OnePlus Technology (Shenzhen) Co., Ltd.
   "^onion,.*":
     description: Onion Corporation
   "^onnn,.*":
@@ -866,6 +935,8 @@ patternProperties:
     description: On Tat Industrial Company
   "^opalkelly,.*":
     description: Opal Kelly Incorporated
+  "^openailab,.*":
+    description: openailab.com
   "^opencores,.*":
     description: OpenCores.org
   "^openembed,.*":
@@ -884,6 +955,8 @@ patternProperties:
     description: Ortus Technology Co., Ltd.
   "^osddisplays,.*":
     description: OSD Displays
+  "^osmc,.*":
+    description: Sam Nazarko Trading Ltd. (Open Source Media Centre)
   "^ouya,.*":
     description: Ouya Inc.
   "^overkiz,.*":
@@ -970,6 +1043,8 @@ patternProperties:
     description: Shenzhen QiShenglong Industrialist Co., Ltd.
   "^qnap,.*":
     description: QNAP Systems, Inc.
+  "^quanta,.*":
+    description: Quanta Computer Inc.
   "^radxa,.*":
     description: Radxa
   "^raidsonic,.*":
@@ -1046,6 +1121,8 @@ patternProperties:
     description: Sensirion AG
   "^sensortek,.*":
     description: Sensortek Technology Corporation
+  "^sercomm,.*":
+    description: Sercomm (Suzhou) Corporation
   "^sff,.*":
     description: Small Form Factor Committee
   "^sgd,.*":
@@ -1056,6 +1133,8 @@ patternProperties:
     description: SGX Sensortech
   "^sharp,.*":
     description: Sharp Corporation
+  "^shift,.*":
+    description: SHIFT GmbH
   "^shimafuji,.*":
     description: Shimafuji Electric, Inc.
   "^shiratech,.*":
@@ -1074,6 +1153,8 @@ patternProperties:
     description: Silicon Image
   "^silabs,.*":
     description: Silicon Laboratories
+  "^silan,.*":
+    description: Hangzhou Silan Microelectronics Co., Ltd.
   "^silead,.*":
     description: Silead Inc.
   "^silergy,.*":
@@ -1092,6 +1173,8 @@ patternProperties:
     description: Sinlinx Electronics Technology Co., LTD
   "^sinovoip,.*":
     description: SinoVoip Co., Ltd
+  "^sinowealth,.*":
+    description: SINO WEALTH Electronic Ltd.
   "^sipeed,.*":
     description: Shenzhen Sipeed Technology Co., Ltd.
   "^sirf,.*":
@@ -1155,10 +1238,16 @@ patternProperties:
     description: StorLink Semiconductors, Inc.
   "^storm,.*":
     description: Storm Semiconductor, Inc.
+  "^storopack,.*":
+    description: Storopack
   "^summit,.*":
     description: Summit microelectronics
   "^sunchip,.*":
     description: Shenzhen Sunchip Technology Co., Ltd
+  "^sundance,.*":
+    description: Sundance DSP Inc.
+  "^sunplus,.*":
+    description: Sunplus Technology Co., Ltd.
   "^SUNW,.*":
     description: Sun Microsystems, Inc
   "^supermicro,.*":
@@ -1171,6 +1260,9 @@ patternProperties:
     description: Synaptics Inc.
   "^synology,.*":
     description: Synology, Inc.
+  "^synopsys,.*":
+    description: Synopsys, Inc. (deprecated, use snps)
+    deprecated: true
   "^tbs,.*":
     description: TBS Technologies
   "^tbs-biometrics,.*":
@@ -1195,12 +1287,18 @@ patternProperties:
     description: Shenzhen Techstar Electronics Co., Ltd.
   "^terasic,.*":
     description: Terasic Inc.
+  "^tesla,.*":
+    description: Tesla, Inc.
   "^tfc,.*":
     description: Three Five Corp
+  "^thead,.*":
+    description: T-Head Semiconductor Co., Ltd.
   "^thine,.*":
     description: THine Electronics, Inc.
   "^thingyjp,.*":
     description: thingy.jp
+  "^thundercomm,.*":
+    description: Thundercomm Technology Co., Ltd.
   "^ti,.*":
     description: Texas Instruments
   "^tianma,.*":
@@ -1284,6 +1382,8 @@ patternProperties:
     description: Vertexcom Technologies, Inc.
   "^via,.*":
     description: VIA Technologies, Inc.
+  "^vicor,.*":
+    description: Vicor Corporation
   "^videostrong,.*":
     description: Videostrong Technology Co., Ltd.
   "^virtio,.*":
@@ -1326,12 +1426,18 @@ patternProperties:
     description: Wi2Wi, Inc.
   "^wiligear,.*":
     description: Wiligear, Ltd.
+  "^willsemi,.*":
+    description: Will Semiconductor Ltd.
   "^winbond,.*":
     description: Winbond Electronics corp.
+  "^wingtech,.*":
+    description: Wingtech Technology Co., Ltd.
   "^winlink,.*":
     description: WinLink Co., Ltd
   "^winstar,.*":
     description: Winstar Display Corp.
+  "^wirelesstag,.*":
+    description: Wireless Tag (qiming yunduan)
   "^wits,.*":
     description: Shenzhen Merrii Technology Co., Ltd. (WITS)
   "^wlf,.*":
@@ -1344,6 +1450,8 @@ patternProperties:
     description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd.
   "^x-powers,.*":
     description: X-Powers
+  "^xen,.*":
+    description: Xen Hypervisor
   "^xes,.*":
     description: Extreme Engineering Solutions (X-ES)
   "^xiaomi,.*":
diff --git a/Documentation/devicetree/bindings/virtio/iommu.txt b/Documentation/devicetree/bindings/virtio/iommu.txt
deleted file mode 100644
index 2407fea0651c..000000000000
--- a/Documentation/devicetree/bindings/virtio/iommu.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* virtio IOMMU PCI device
-
-When virtio-iommu uses the PCI transport, its programming interface is
-discovered dynamically by the PCI probing infrastructure. However the
-device tree statically describes the relation between IOMMU and DMA
-masters. Therefore, the PCI root complex that hosts the virtio-iommu
-contains a child node representing the IOMMU device explicitly.
-
-Required properties:
-
-- compatible:	Should be "virtio,pci-iommu"
-- reg:		PCI address of the IOMMU. As defined in the PCI Bus
-		Binding reference [1], the reg property is a five-cell
-		address encoded as (phys.hi phys.mid phys.lo size.hi
-		size.lo). phys.hi should contain the device's BDF as
-		0b00000000 bbbbbbbb dddddfff 00000000. The other cells
-		should be zero.
-- #iommu-cells:	Each platform DMA master managed by the IOMMU is assigned
-		an endpoint ID, described by the "iommus" property [2].
-		For virtio-iommu, #iommu-cells must be 1.
-
-Notes:
-
-- DMA from the IOMMU device isn't managed by another IOMMU. Therefore the
-  virtio-iommu node doesn't have an "iommus" property, and is omitted from
-  the iommu-map property of the root complex.
-
-Example:
-
-pcie@10000000 {
-	compatible = "pci-host-ecam-generic";
-	...
-
-	/* The IOMMU programming interface uses slot 00:01.0 */
-	iommu0: iommu@0008 {
-		compatible = "virtio,pci-iommu";
-		reg = <0x00000800 0 0 0 0>;
-		#iommu-cells = <1>;
-	};
-
-	/*
-	 * The IOMMU manages all functions in this PCI domain except
-	 * itself. Omit BDF 00:01.0.
-	 */
-	iommu-map = <0x0 &iommu0 0x0 0x8>
-		    <0x9 &iommu0 0x9 0xfff7>;
-};
-
-pcie@20000000 {
-	compatible = "pci-host-ecam-generic";
-	...
-	/*
-	 * The IOMMU also manages all functions from this domain,
-	 * with endpoint IDs 0x10000 - 0x1ffff
-	 */
-	iommu-map = <0x0 &iommu0 0x10000 0x10000>;
-};
-
-ethernet@fe001000 {
-	...
-	/* The IOMMU manages this platform device with endpoint ID 0x20000 */
-	iommus = <&iommu0 0x20000>;
-};
-
-[1] Documentation/devicetree/bindings/pci/pci.txt
-[2] Documentation/devicetree/bindings/iommu/iommu.txt
diff --git a/Documentation/devicetree/bindings/virtio/mmio.yaml b/Documentation/devicetree/bindings/virtio/mmio.yaml
index 4b7a0273181c..0aa8433f0a5e 100644
--- a/Documentation/devicetree/bindings/virtio/mmio.yaml
+++ b/Documentation/devicetree/bindings/virtio/mmio.yaml
@@ -20,6 +20,8 @@ properties:
   reg:
     maxItems: 1
 
+  dma-coherent: true
+
   interrupts:
     maxItems: 1
 
@@ -31,6 +33,10 @@ properties:
     description: Required for devices making accesses thru an IOMMU.
     maxItems: 1
 
+  wakeup-source:
+    type: boolean
+    description: Required for setting irq of a virtio_mmio device as wakeup source.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/virtio/pci-iommu.yaml b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
new file mode 100644
index 000000000000..972a785a42de
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/pci-iommu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/virtio/pci-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: virtio-iommu device using the virtio-pci transport
+
+maintainers:
+  - Jean-Philippe Brucker <jean-philippe@linaro.org>
+
+description: |
+  When virtio-iommu uses the PCI transport, its programming interface is
+  discovered dynamically by the PCI probing infrastructure. However the
+  device tree statically describes the relation between IOMMU and DMA
+  masters. Therefore, the PCI root complex that hosts the virtio-iommu
+  contains a child node representing the IOMMU device explicitly.
+
+  DMA from the IOMMU device isn't managed by another IOMMU. Therefore the
+  virtio-iommu node doesn't have an "iommus" property, and is omitted from
+  the iommu-map property of the root complex.
+
+properties:
+  # If compatible is present, it should contain the vendor and device ID
+  # according to the PCI Bus Binding specification. Since PCI provides
+  # built-in identification methods, compatible is not actually required.
+  compatible:
+    oneOf:
+      - items:
+          - const: virtio,pci-iommu
+          - const: pci1af4,1057
+      - items:
+          - const: pci1af4,1057
+
+  reg:
+    description: |
+      PCI address of the IOMMU. As defined in the PCI Bus Binding
+      reference, the reg property is a five-cell address encoded as (phys.hi
+      phys.mid phys.lo size.hi size.lo). phys.hi should contain the device's
+      BDF as 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be
+      zero. See Documentation/devicetree/bindings/pci/pci.txt
+
+  '#iommu-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@40000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x40000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU manages all functions in this PCI domain except
+             * itself. Omit BDF 00:01.0.
+             */
+            iommu-map = <0x0 &iommu0 0x0 0x8
+                         0x9 &iommu0 0x9 0xfff7>;
+
+            /* The IOMMU programming interface uses slot 00:01.0 */
+            iommu0: iommu@1,0 {
+                compatible = "pci1af4,1057";
+                reg = <0x800 0 0 0 0>;
+                #iommu-cells = <1>;
+            };
+        };
+
+        pcie@50000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x50000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x51000000  0x0 0x51000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU also manages all functions from this domain,
+             * with endpoint IDs 0x10000 - 0x1ffff
+             */
+            iommu-map = <0x0 &iommu0 0x10000 0x10000>;
+        };
+
+        ethernet {
+            /* The IOMMU manages this platform device with endpoint ID 0x20000 */
+            iommus = <&iommu0 0x20000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.yaml b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
index 8eef2380161b..b02b02237082 100644
--- a/Documentation/devicetree/bindings/w1/w1-gpio.yaml
+++ b/Documentation/devicetree/bindings/w1/w1-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/w1/w1-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bitbanged GPIO 1-Wire Bus Device Tree Bindings
+title: Bitbanged GPIO 1-Wire Bus
 
 maintainers:
   - Daniel Mack <zonque@gmail.com>
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 43afa24513b9..026c2e5e77aa 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/allwinner,sun4i-a10-wdt.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Watchdog Device Tree Bindings
+title: Allwinner A10 Watchdog
 
 allOf:
   - $ref: "watchdog.yaml#"
@@ -26,10 +26,8 @@ properties:
               - allwinner,sun50i-h616-wdt
               - allwinner,sun50i-r329-wdt
               - allwinner,sun50i-r329-wdt-reset
+              - allwinner,suniv-f1c100s-wdt
           - const: allwinner,sun6i-a31-wdt
-      - items:
-          - const: allwinner,suniv-f1c100s-wdt
-          - const: allwinner,sun4i-a10-wdt
       - const: allwinner,sun20i-d1-wdt
       - items:
           - const: allwinner,sun20i-d1-wdt-reset
@@ -41,14 +39,8 @@ properties:
   clocks:
     minItems: 1
     items:
-      - description: High-frequency oscillator input, divided internally
-      - description: Low-frequency oscillator input, only found on some variants
-
-  clock-names:
-    minItems: 1
-    items:
-      - const: hosc
-      - const: losc
+      - description: 32 KHz input clock
+      - description: secondary clock source
 
   interrupts:
     maxItems: 1
@@ -72,10 +64,14 @@ if:
 then:
   properties:
     clocks:
-      minItems: 2
+      items:
+        - description: High-frequency oscillator input, divided internally
+        - description: Low-frequency oscillator input
 
     clock-names:
-      minItems: 2
+      items:
+        - const: hosc
+        - const: losc
 
   required:
     - clock-names
@@ -85,9 +81,6 @@ else:
     clocks:
       maxItems: 1
 
-    clock-names:
-      maxItems: 1
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
index c7459cf70e30..497d60408ea0 100644
--- a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
@@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 title: Meson GXBB SoCs Watchdog timer
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 allOf:
   - $ref: watchdog.yaml#
diff --git a/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml
new file mode 100644
index 000000000000..ad27bc518670
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,at91sam9-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Watchdog Timers
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+properties:
+  compatible:
+    const: atmel,at91sam9260-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  atmel,max-heartbeat-sec:
+    description:
+      Should contain the maximum heartbeat value in seconds. This value
+      should be less or equal to 16. It is used to compute the WDV field.
+    maximum: 16
+
+  atmel,min-heartbeat-sec:
+    description:
+      Should contain the minimum heartbeat value in seconds. This value
+      must be smaller than the max-heartbeat-sec value. It is used to
+      compute the WDD field.
+    maximum: 16
+
+  atmel,watchdog-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should be hardware or software.
+    oneOf:
+      - description:
+          Hardware watchdog uses the at91 watchdog reset.
+        const: hardware
+      - description: |
+          Software watchdog uses the watchdog interrupt
+          to trigger a software reset.
+        const: software
+    default: hardware
+
+  atmel,reset-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Should be proc or all. This is valid only when using hardware watchdog.
+    oneOf:
+      - description:
+          Assert peripherals and processor reset signals.
+        const: all
+      - description:
+          Assert the processor reset signal.
+        const: proc
+    default: all
+
+  atmel,disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Should be present if you want to stop the watchdog.
+
+  atmel,idle-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Should be present if you want to stop the watchdog when
+      entering idle state.
+      CAUTION: This property should be used with care, it actually makes the
+      watchdog not counting when the CPU is in idle state, therefore the
+      watchdog reset time depends on mean CPU usage and will not reset at all
+      if the CPU stops working while it is in idle state, which is probably
+      not what you want.
+
+  atmel,dbg-halt:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Should be present if you want to stop the watchdog when
+      entering debug state.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: watchdog.yaml#
+  - if:
+      properties:
+        atmel,reset-type:
+          enum:
+            - all
+            - proc
+    then:
+      properties:
+        atmel,watchdog-type:
+          const: hardware
+
+dependencies:
+  atmel,reset-type: ['atmel,watchdog-type']
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    watchdog@fffffd40 {
+        compatible = "atmel,at91sam9260-wdt";
+        reg = <0xfffffd40 0x10>;
+        interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+        clocks = <&clk32k>;
+        timeout-sec = <15>;
+        atmel,watchdog-type = "hardware";
+        atmel,reset-type = "all";
+        atmel,dbg-halt;
+        atmel,idle-halt;
+        atmel,max-heartbeat-sec = <16>;
+        atmel,min-heartbeat-sec = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
index 9856cd76c28d..a9635c03761c 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -22,6 +22,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   atmel,watchdog-type:
     $ref: /schemas/types.yaml#/definitions/string
     description: should be hardware or software.
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
deleted file mode 100644
index 711a880b3d3b..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Atmel Watchdog Timers
-
-** at91sam9-wdt
-
-Required properties:
-- compatible: must be "atmel,at91sam9260-wdt".
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: phandle to input clock.
-
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-- interrupts : Should contain WDT interrupt.
-- atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in
-	seconds. This value should be less or equal to 16. It is used to
-	compute the WDV field.
-- atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in
-	seconds. This value must be smaller than the max-heartbeat-sec value.
-	It is used to compute the WDD field.
-- atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog
-	use the at91 watchdog reset. Software watchdog use the watchdog
-	interrupt to trigger a software reset.
-- atmel,reset-type : Should be "proc" or "all".
-	"all" : assert peripherals and processor reset signals
-	"proc" : assert the processor reset signal
-	This is valid only when using "hardware" watchdog.
-- atmel,disable : Should be present if you want to disable the watchdog.
-- atmel,idle-halt : Should be present if you want to stop the watchdog when
-	entering idle state.
-	CAUTION: This property should be used with care, it actually makes the
-	watchdog not counting when the CPU is in idle state, therefore the
-	watchdog reset time depends on mean CPU usage and will not reset at all
-	if the CPU stop working while it is in idle state, which is probably
-	not what you want.
-- atmel,dbg-halt : Should be present if you want to stop the watchdog when
-	entering debug state.
-
-Example:
-	watchdog@fffffd40 {
-		compatible = "atmel,at91sam9260-wdt";
-		reg = <0xfffffd40 0x10>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&clk32k>;
-		timeout-sec = <15>;
-		atmel,watchdog-type = "hardware";
-		atmel,reset-type = "all";
-		atmel,dbg-halt;
-		atmel,idle-halt;
-		atmel,max-heartbeat-sec = <16>;
-		atmel,min-heartbeat-sec = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
deleted file mode 100644
index 84122270be8f..000000000000
--- a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-BCM7038 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm7038-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- clocks: The clock running the watchdog. If no clock is found the
-	  driver will default to 27000000 Hz.
-
-Example:
-
-watchdog@f040a7e8 {
-	compatible = "brcm,bcm7038-wdt";
-	clocks = <&upg_fixed>;
-	reg = <0xf040a7e8 0x16>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
new file mode 100644
index 000000000000..a926809352b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx and BCM7038 watchdog timer
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Justin Chen <justinpopo6@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-wdt
+      - brcm,bcm7038-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock running the watchdog. If no clock is found the driver will
+      default to 27000000 Hz.
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    watchdog@f040a7e8 {
+      compatible = "brcm,bcm7038-wdt";
+      reg = <0xf040a7e8 0x16>;
+      clocks = <&upg_fixed>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
index 950e4fba8dbc..354314d854ef 100644
--- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -10,6 +10,12 @@ Optional properties:
 - dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
 	Only use this option if you can't use the watchdog automatic suspend
 	function during a suspend (see register CONTROL_B).
+- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the
+	watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers
+	POWERDOWN. Can be 0 or 1. Only use this option if you want to change the
+	default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT
+	set the WATCHDOG_SD bit and on timeout watchdog behavior will match the
+	chip's OTP settings.
 
 Example: DA9062
 
diff --git a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
deleted file mode 100644
index 9ecdb502e605..000000000000
--- a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Faraday Technology FTWDT010 watchdog
-
-This is an IP part from Faraday Technology found in the Gemini
-SoCs and others.
-
-Required properties:
-- compatible : must be one of
-  "faraday,ftwdt010"
-  "cortina,gemini-watchdog", "faraday,ftwdt010"
-- reg : shall contain base register location and length
-- interrupts : shall contain the interrupt for the watchdog
-
-Optional properties:
-- timeout-sec : the default watchdog timeout in seconds.
-
-Example:
-
-watchdog@41000000 {
-	compatible = "faraday,ftwdt010";
-	reg = <0x41000000 0x1000>;
-	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml
new file mode 100644
index 000000000000..6ecd429f76b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/faraday,ftwdt010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTWDT010 watchdog
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Corentin Labbe <clabbe@baylibre.com>
+
+description: |
+  This is an IP part from Faraday Technology found in the Gemini
+  SoCs and others.
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,ftwdt010
+      - items:
+          - enum:
+              - cortina,gemini-watchdog
+              - moxa,moxart-watchdog
+          - const: faraday,ftwdt010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: PCLK
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    watchdog@41000000 {
+      compatible = "faraday,ftwdt010";
+      reg = <0x41000000 0x1000>;
+      interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+      timeout-sec = <5>;
+    };
+  - |
+    watchdog: watchdog@98500000 {
+      compatible = "moxa,moxart-watchdog", "faraday,ftwdt010";
+      reg = <0x98500000 0x10>;
+      clocks = <&clk_apb>;
+      clock-names = "PCLK";
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
new file mode 100644
index 000000000000..f84c45d687d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/fsl,scu-wdt.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/fsl,scu-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Watchdog bindings based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-wdt
+      - const: fsl,imx-sc-wdt
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog {
+        compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+        timeout-sec = <60>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
index 51d6d482bbc2..8562978aa0c8 100644
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.yaml
@@ -14,8 +14,12 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx7ulp-wdt
+    oneOf:
+      - const: fsl,imx7ulp-wdt
+      - items:
+          - const: fsl,imx8ulp-wdt
+          - const: fsl,imx7ulp-wdt
+      - const: fsl,imx93-wdt
 
   reg:
     maxItems: 1
@@ -26,12 +30,6 @@ properties:
   clocks:
     maxItems: 1
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clocks-parents:
-    maxItems: 1
-
   timeout-sec: true
 
 required:
@@ -53,7 +51,7 @@ examples:
         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
         assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-        assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+        assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
         timeout-sec = <40>;
     };
 
diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml
new file mode 100644
index 000000000000..b2b17fdf4e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/mediatek,mt7621-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink Watchdog Timers
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-wdt
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog@100 {
+      compatible = "mediatek,mt7621-wdt";
+      reg = <0x100 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
index e3e8b86dbf63..33794711c594 100644
--- a/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/mstar,msc313e-wdt.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/mstar,msc313e-wdt.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar Watchdog Device Tree Bindings
+title: MStar Watchdog
 
 maintainers:
   - Daniel Palmer <daniel@0x0f.com>
diff --git a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
deleted file mode 100644
index c15ef0ef609f..000000000000
--- a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Ralink Watchdog Timers
-
-Required properties:
-- compatible: must be "mediatek,mt7621-wdt"
-- reg: physical base address of the controller and length of the register range
-
-Example:
-
-	watchdog@100 {
-		compatible = "mediatek,mt7621-wdt";
-		reg = <0x100 0x10>;
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 0114871f887a..762c62e428ef 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -8,6 +8,7 @@ Required properties:
 - compatible should contain:
 	"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
 	"mediatek,mt2712-wdt": for MT2712
+	"mediatek,mt6582-wdt", "mediatek,mt6589-wdt": for MT6582
 	"mediatek,mt6589-wdt": for MT6589
 	"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
@@ -15,6 +16,7 @@ Required properties:
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
 	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
 	"mediatek,mt8183-wdt": for MT8183
+	"mediatek,mt8186-wdt", "mediatek,mt6589-wdt": for MT8186
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192
 	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
index 9059f54dc023..866a958b8a2b 100644
--- a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt
@@ -6,7 +6,8 @@ expiry.
 
 Required properties:
 - compatible      : "nuvoton,npcm750-wdt" for NPCM750 (Poleg), or
-                    "nuvoton,wpcm450-wdt" for WPCM450 (Hermon).
+                    "nuvoton,wpcm450-wdt" for WPCM450 (Hermon), or
+                    "nuvoton,npcm845-wdt" for NPCM845 (Arbel).
 - reg             : Offset and length of the register set for the device.
 - interrupts      : Contain the timer interrupt with flags for
                     falling edge.
diff --git a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
deleted file mode 100644
index c6ae9c9d5e3e..000000000000
--- a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Xilinx AXI/PLB soft-core watchdog Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "xlnx,xps-timebase-wdt-1.00.a" or
-			  "xlnx,xps-timebase-wdt-1.01.a".
-- reg			: Physical base address and size
-
-Optional properties:
-- clocks		: Input clock specifier. Refer to common clock
-			  bindings.
-- clock-frequency	: Frequency of clock in Hz
-- xlnx,wdt-enable-once	: 0 - Watchdog can be restarted
-			  1 - Watchdog can be enabled just once
-- xlnx,wdt-interval	: Watchdog timeout interval in 2^<val> clock cycles,
-			  <val> is integer from 8 to 31.
-
-Example:
-axi-timebase-wdt@40100000 {
-	clock-frequency = <50000000>;
-	compatible = "xlnx,xps-timebase-wdt-1.00.a";
-	clocks = <&clkc 15>;
-	reg = <0x40100000 0x10000>;
-	xlnx,wdt-enable-once = <0x0>;
-	xlnx,wdt-interval = <0x1b>;
-} ;
diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
deleted file mode 100644
index 6fb984f31982..000000000000
--- a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-QCOM PM8916 watchdog timer controller
-
-This pm8916 watchdog timer controller must be under pm8916-pon node.
-
-Required properties:
-- compatible: should be "qcom,pm8916-wdt"
-
-Optional properties :
-- interrupts : Watchdog pre-timeout (bark) interrupt.
-- timeout-sec : Watchdog timeout value in seconds.
-
-Example:
-
-	pm8916_0: pm8916@0 {
-		compatible = "qcom,pm8916", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-
-		pon@800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x800>;
-
-			watchdog {
-				compatible = "qcom,pm8916-wdt";
-				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
-				timeout-sec = <10>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
new file mode 100644
index 000000000000..568eb8480fc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/qcom,pm8916-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8916 watchdog timer controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: qcom,pm8916-wdt
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm8916", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8916-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            watchdog {
+                compatible = "qcom,pm8916-wdt";
+                interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+                timeout-sec = <60>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
index ba60bdf1fecc..d8ac0be36e6c 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml
@@ -14,20 +14,30 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - qcom,apss-wdt-qcs404
-      - qcom,apss-wdt-sc7180
-      - qcom,apss-wdt-sc7280
-      - qcom,apss-wdt-sdm845
-      - qcom,apss-wdt-sdx55
-      - qcom,apss-wdt-sm8150
-      - qcom,kpss-timer
-      - qcom,kpss-wdt
-      - qcom,kpss-wdt-apq8064
-      - qcom,kpss-wdt-ipq4019
-      - qcom,kpss-wdt-ipq8064
-      - qcom,kpss-wdt-msm8960
-      - qcom,scss-timer
+    oneOf:
+      - items:
+          - enum:
+              - qcom,apss-wdt-qcs404
+              - qcom,apss-wdt-sc7180
+              - qcom,apss-wdt-sc7280
+              - qcom,apss-wdt-sc8180x
+              - qcom,apss-wdt-sc8280xp
+              - qcom,apss-wdt-sdm845
+              - qcom,apss-wdt-sdx55
+              - qcom,apss-wdt-sdx65
+              - qcom,apss-wdt-sm6350
+              - qcom,apss-wdt-sm8150
+              - qcom,apss-wdt-sm8250
+          - const: qcom,kpss-wdt
+      - items:
+          - enum:
+              - qcom,kpss-wdt
+              - qcom,kpss-timer
+              - qcom,kpss-wdt-apq8064
+              - qcom,kpss-wdt-ipq4019
+              - qcom,kpss-wdt-ipq8064
+              - qcom,kpss-wdt-msm8960
+              - qcom,scss-timer
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
new file mode 100644
index 000000000000..099245fe7b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/realtek,otto-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto watchdog timer
+
+maintainers:
+  - Sander Vanheule <sander@svanheule.net>
+
+description: |
+  The timer has two timeout phases. Both phases have a maximum duration of 32
+  prescaled clock ticks, which is ca. 43s with a bus clock of 200MHz. The
+  minimum duration of each phase is one tick. Each phase can trigger an
+  interrupt, although the phase 2 interrupt will occur with the system reset.
+  - Phase 1: During this phase, the WDT can be pinged to reset the timeout.
+  - Phase 2: Starts after phase 1 has timed out, and only serves to give the
+    system some time to clean up, or notify others that it's going to reset.
+    During this phase, pinging the WDT has no effect, and a reset is
+    unavoidable, unless the WDT is disabled.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8380-wdt
+      - realtek,rtl8390-wdt
+      - realtek,rtl9300-wdt
+      - realtek,rtl9310-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: interrupt specifier for pretimeout
+      - description: interrupt specifier for timeout
+
+  interrupt-names:
+    items:
+      - const: phase1
+      - const: phase2
+
+  realtek,reset-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Specify how the system is reset after a timeout. Defaults to "cpu" if
+      left unspecified.
+    oneOf:
+      - description: Reset the entire chip
+        const: soc
+      - description: |
+          Reset the CPU and IPsec engine, but leave other peripherals untouched
+        const: cpu
+      - description: |
+          Reset the execution pointer, but don't actually reset any hardware
+        const: software
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+dependencies:
+  interrupts: [ interrupt-names ]
+
+examples:
+  - |
+    watchdog: watchdog@3150 {
+        compatible = "realtek,rtl8380-wdt";
+        reg = <0x3150 0xc>;
+
+        realtek,reset-mode = "soc";
+
+        clocks = <&lxbus_clock>;
+        timeout-sec = <20>;
+
+        interrupt-parent = <&rtlintc>;
+        interrupt-names = "phase1", "phase2";
+        interrupts = <19>, <18>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
index ab66d3f0c476..26b1815a6753 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Wolfram Sang <wsa+renesas@sang-engineering.com>
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
-allOf:
-  - $ref: "watchdog.yaml#"
-
 properties:
   compatible:
     oneOf:
@@ -24,6 +21,23 @@ properties:
 
       - items:
           - enum:
+              - renesas,r9a06g032-wdt    # RZ/N1D
+          - const: renesas,rzn1-wdt      # RZ/N1
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-wdt    # RZ/G2UL
+              - renesas,r9a07g044-wdt    # RZ/G2{L,LC}
+              - renesas,r9a07g054-wdt    # RZ/V2L
+          - const: renesas,rzg2l-wdt
+
+      - items:
+          - enum:
+              - renesas,r9a09g011-wdt    # RZ/V2M
+          - const: renesas,rzv2m-wdt     # RZ/V2M
+
+      - items:
+          - enum:
               - renesas,r8a7742-wdt      # RZ/G1H
               - renesas,r8a7743-wdt      # RZ/G1M
               - renesas,r8a7744-wdt      # RZ/G1N
@@ -50,17 +64,41 @@ properties:
               - renesas,r8a77980-wdt     # R-Car V3H
               - renesas,r8a77990-wdt     # R-Car E3
               - renesas,r8a77995-wdt     # R-Car D3
-              - renesas,r8a779a0-wdt     # R-Car V3U
           - const: renesas,rcar-gen3-wdt # R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,r8a779a0-wdt     # R-Car V3U
+              - renesas,r8a779f0-wdt     # R-Car S4-8
+              - renesas,r8a779g0-wdt     # R-Car V4H
+          - const: renesas,rcar-gen4-wdt # R-Car Gen4
+
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Timeout
+      - description: Parity error
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: wdt
+      - const: perrout
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Register access clock
+      - description: Main clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: pclk
+      - const: oscclk
 
   power-domains:
     maxItems: 1
@@ -73,19 +111,63 @@ properties:
 required:
   - compatible
   - reg
+  - interrupts
   - clocks
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          enum:
-            - renesas,rza-wdt
-then:
-  required:
-    - power-domains
-    - resets
+allOf:
+  - $ref: "watchdog.yaml#"
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rza-wdt
+                - renesas,rzn1-wdt
+    then:
+      required:
+        - power-domains
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+              - renesas,rzv2m-wdt
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-wdt
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+        interrupt-names:
+          minItems: 2
+      required:
+        - interrupt-names
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
 
 additionalProperties: false
 
@@ -93,9 +175,11 @@ examples:
   - |
     #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
     #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     wdt0: watchdog@e6020000 {
             compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
             reg = <0xe6020000 0x0c>;
+            interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             clocks = <&cpg CPG_MOD 402>;
             power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
             resets = <&cpg 402>;
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..8fb6656ba0c2 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -22,25 +22,33 @@ properties:
       - samsung,exynos5250-wdt                # for Exynos5250
       - samsung,exynos5420-wdt                # for Exynos5420
       - samsung,exynos7-wdt                   # for Exynos7
+      - samsung,exynos850-wdt                 # for Exynos850
+      - samsung,exynosautov9-wdt              # for Exynosautov9
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    items:
-      - const: watchdog
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
 
+  samsung,cluster-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Index of CPU cluster on which watchdog is running (in case of Exynos850)
+
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420, Exynos7 and Exynos850).
 
 required:
   - compatible
@@ -58,9 +66,42 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
+              - samsung,exynos850-wdt
+              - samsung,exynosautov9-wdt
     then:
       required:
         - samsung,syscon-phandle
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos850-wdt
+              - samsung,exynosautov9-wdt
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, used for register interface
+            - description: Source clock (driving watchdog counter)
+        clock-names:
+          items:
+            - const: watchdog
+            - const: watchdog_src
+        samsung,cluster-index:
+          enum: [0, 1]
+      required:
+        - samsung,cluster-index
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Bus clock, which is also a source clock
+        clock-names:
+          items:
+            - const: watchdog
+        samsung,cluster-index: false
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
index 6461eb4f4a27..92df6e453f64 100644
--- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml
@@ -20,6 +20,7 @@ properties:
           - enum:
               - rockchip,px30-wdt
               - rockchip,rk3066-wdt
+              - rockchip,rk3128-wdt
               - rockchip,rk3188-wdt
               - rockchip,rk3228-wdt
               - rockchip,rk3288-wdt
diff --git a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
index a059d16cb4f2..90698cfa8f94 100644
--- a/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/socionext,uniphier-wdt.yaml
@@ -19,7 +19,7 @@ properties:
 required:
   - compatible
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml b/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
new file mode 100644
index 000000000000..d90271013191
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/sunplus,sp7021-wdt.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/sunplus,sp7021-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SoCs Watchdog
+
+maintainers:
+  - XianTao Hu <xt.hu@cqplus1.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-wdt
+
+  reg:
+    items:
+      - description: watchdog registers regions
+      - description: miscellaneous control registers regions
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog: watchdog@9c000630 {
+        compatible = "sunplus,sp7021-wdt";
+        reg = <0x9c000630 0x08>, <0x9c000274 0x04>;
+        clocks = <&clkc 0x24>;
+        resets = <&rstc 0x14>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
index 054584d7543a..2f33635876ff 100644
--- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
@@ -34,12 +34,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clocks-parents:
-    maxItems: 1
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
index 690e19ce4b87..eba083822d1f 100644
--- a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
@@ -35,20 +35,16 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
+
     soc {
         #address-cells = <2>;
         #size-cells = <2>;
 
-        wdt_clk: wdt-clk {
-            compatible = "fixed-clock";
-            clock-frequency = <150000000>;
-            #clock-cells = <0>;
-        };
-
-        watchdog@28330000 {
+        wdt: watchdog@28330000 {
             compatible = "toshiba,visconti-wdt";
             reg = <0 0x28330000 0 0x1000>;
-            clocks = <&wdt_clk>;
             timeout-sec = <20>;
+            clocks = <&pismu TMPV770X_CLK_WDTCLK>;
         };
     };
diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
new file mode 100644
index 000000000000..493a1c954707
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI/PLB softcore and window Watchdog Timer
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+  - Srinivas Neeli <srinivas.neeli@xilinx.com>
+
+description:
+  The Timebase watchdog timer(WDT) is a free-running 32 bit counter.
+  WDT uses a dual-expiration architecture. After one expiration of
+  the timeout interval, an interrupt is generated and the WDT state
+  bit is set to one in the status register. If the state bit is not
+  cleared (by writing a one to the state bit) before the next
+  expiration of the timeout interval, a WDT reset is generated.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-timebase-wdt-1.01.a
+      - xlnx,xps-timebase-wdt-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: Frequency of clock in Hz
+
+  xlnx,wdt-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Watchdog timeout interval
+    minimum: 8
+    maximum: 32
+
+  xlnx,wdt-enable-once:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: If watchdog is configured as enable once,
+                 then the watchdog cannot be disabled after
+                 it has been enabled.
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    watchdog@40100000 {
+      compatible = "xlnx,xps-timebase-wdt-1.00.a";
+      reg = <0x40100000 0x1000>;
+      clock-frequency = <50000000>;
+      clocks = <&clkc 15>;
+      xlnx,wdt-enable-once = <0x0>;
+      xlnx,wdt-interval = <0x1b>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/writing-bindings.rst b/Documentation/devicetree/bindings/writing-bindings.rst
index 18d9e0689d49..1ad081de2dd0 100644
--- a/Documentation/devicetree/bindings/writing-bindings.rst
+++ b/Documentation/devicetree/bindings/writing-bindings.rst
@@ -53,11 +53,36 @@ Properties
 
 - DO use common property unit suffixes for properties with scientific units.
   Recommended suffixes are listed at
-  https://github.com/devicetree-org/dt-schema/blob/master/schemas/property-units.yaml
+  https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml
 
 - DO define properties in terms of constraints. How many entries? What are
   possible values? What is the order?
 
+Typical cases and caveats
+=========================
+
+- Phandle entries, like clocks/dmas/interrupts/resets, should always be
+  explicitly ordered. Include the {clock,dma,interrupt,reset}-names if there is
+  more than one phandle. When used, both of these fields need the same
+  constraints (e.g.  list of items).
+
+- For names used in {clock,dma,interrupt,reset}-names, do not add any suffix,
+  e.g.: "tx" instead of "txirq" (for interrupt).
+
+- Properties without schema types (e.g. without standard suffix or not defined
+  by schema) need the type, even if this is an enum.
+
+- If schema includes other schema (e.g. /schemas/i2c/i2c-controller.yaml) use
+  "unevaluatedProperties:false". In other cases, usually use
+  "additionalProperties:false".
+
+- For sub-blocks/components of bigger device (e.g. SoC blocks) use rather
+  device-based compatible (e.g. SoC-based compatible), instead of custom
+  versioning of that component.
+  For example use "vendor,soc1234-i2c" instead of "vendor,i2c-v2".
+
+- "syscon" is not a generic property. Use vendor and type, e.g.
+  "vendor,power-manager-syscon".
 
 Board/SoC .dts Files
 ====================
diff --git a/Documentation/devicetree/bindings/writing-schema.rst b/Documentation/devicetree/bindings/writing-schema.rst
index ea21c72aeb37..4a381d20f2b4 100644
--- a/Documentation/devicetree/bindings/writing-schema.rst
+++ b/Documentation/devicetree/bindings/writing-schema.rst
@@ -108,6 +108,12 @@ The YAML Devicetree format also makes all string values an array and scalar
 values a matrix (in order to define groupings) even when only a single value
 is present. Single entries in schemas are fixed up to match this encoding.
 
+Coding style
+------------
+
+Use YAML coding style (two-space indentation). For DTS examples in the schema,
+preferred is four-space indentation.
+
 Testing
 -------
 
@@ -118,22 +124,17 @@ The DT schema project must be installed in order to validate the DT schema
 binding documents and validate DTS files using the DT schema. The DT schema
 project can be installed with pip::
 
-    pip3 install git+https://github.com/devicetree-org/dt-schema.git@master
-
-Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be
-installed. Ensure they are in your PATH (~/.local/bin by default).
-
-dtc must also be built with YAML output support enabled. This requires that
-libyaml and its headers be installed on the host system. For some distributions
-that involves installing the development package, such as:
+    pip3 install dtschema
 
-Debian::
+Note that 'dtschema' installation requires 'swig' and Python development files
+installed first. On Debian/Ubuntu systems::
 
-  apt-get install libyaml-dev
+    apt install swig python3-dev
 
-Fedora::
+Several executables (dt-doc-validate, dt-mk-schema, dt-validate) will be
+installed. Ensure they are in your PATH (~/.local/bin by default).
 
-  dnf -y install libyaml-devel
+Recommended is also to install yamllint (used by dtschema when present).
 
 Running checks
 ~~~~~~~~~~~~~~
@@ -157,13 +158,14 @@ It is possible to run both in a single command::
 
     make dt_binding_check dtbs_check
 
-It is also possible to run checks with a single schema file by setting the
-``DT_SCHEMA_FILES`` variable to a specific schema file.
+It is also possible to run checks with a subset of matching schema files by
+setting the ``DT_SCHEMA_FILES`` variable to a specific schema file or pattern.
 
 ::
 
-    make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml
-    make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/trivial-devices.yaml
+    make dt_binding_check DT_SCHEMA_FILES=trivial-devices.yaml
+    make dt_binding_check DT_SCHEMA_FILES=/gpio/
+    make dtbs_check DT_SCHEMA_FILES=trivial-devices.yaml
 
 
 json-schema Resources
diff --git a/Documentation/devicetree/of_unittest.rst b/Documentation/devicetree/of_unittest.rst
index 2afe41a37148..8864b52d1195 100644
--- a/Documentation/devicetree/of_unittest.rst
+++ b/Documentation/devicetree/of_unittest.rst
@@ -24,7 +24,28 @@ from the unflattened device tree data structure. This interface is used by
 most of the device drivers in various use cases.
 
 
-2. Test-data
+2. Verbose Output (EXPECT)
+==========================
+
+If unittest detects a problem it will print a warning or error message to
+the console.  Unittest also triggers warning and error messages from other
+kernel code as a result of intentionally bad unittest data.  This has led
+to confusion as to whether the triggered messages are an expected result
+of a test or whether there is a real problem that is independent of unittest.
+
+'EXPECT \ : text' (begin) and 'EXPECT / : text' (end) messages have been
+added to unittest to report that a warning or error is expected.  The
+begin is printed before triggering the warning or error, and the end is
+printed after triggering the warning or error.
+
+The EXPECT messages result in very noisy console messages that are difficult
+to read.  The script scripts/dtc/of_unittest_expect was created to filter
+this verbosity and highlight mismatches between triggered warnings and
+errors vs expected warnings and errors.  More information is available
+from 'scripts/dtc/of_unittest_expect --help'.
+
+
+3. Test-data
 ============
 
 The Device Tree Source file (drivers/of/unittest-data/testcases.dts) contains
@@ -56,7 +77,7 @@ The assembly file is compiled into an object file (testcases.dtb.o), and is
 linked into the kernel image.
 
 
-2.1. Adding the test data
+3.1. Adding the test data
 -------------------------
 
 Un-flattened device tree structure:
@@ -191,7 +212,7 @@ properties are updated to the live tree's node by calling the function
 update_node_properties().
 
 
-2.2. Removing the test data
+3.2. Removing the test data
 ---------------------------
 
 Once the test case execution is complete, selftest_data_remove is called in
diff --git a/Documentation/devicetree/overlay-notes.rst b/Documentation/devicetree/overlay-notes.rst
index b2b8db765b8c..e139f22b363e 100644
--- a/Documentation/devicetree/overlay-notes.rst
+++ b/Documentation/devicetree/overlay-notes.rst
@@ -119,10 +119,32 @@ Finally, if you need to remove all overlays in one-go, just call
 of_overlay_remove_all() which will remove every single one in the correct
 order.
 
-In addition, there is the option to register notifiers that get called on
+There is the option to register notifiers that get called on
 overlay operations. See of_overlay_notifier_register/unregister and
 enum of_overlay_notify_action for details.
 
-Note that a notifier callback is not supposed to store pointers to a device
-tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
-respective node it received.
+A notifier callback for OF_OVERLAY_PRE_APPLY, OF_OVERLAY_POST_APPLY, or
+OF_OVERLAY_PRE_REMOVE may store pointers to a device tree node in the overlay
+or its content but these pointers must not persist past the notifier callback
+for OF_OVERLAY_POST_REMOVE.  The memory containing the overlay will be
+kfree()ed after OF_OVERLAY_POST_REMOVE notifiers are called.  Note that the
+memory will be kfree()ed even if the notifier for OF_OVERLAY_POST_REMOVE
+returns an error.
+
+The changeset notifiers in drivers/of/dynamic.c are a second type of notifier
+that could be triggered by applying or removing an overlay.  These notifiers
+are not allowed to store pointers to a device tree node in the overlay
+or its content.  The overlay code does not protect against such pointers
+remaining active when the memory containing the overlay is freed as a result
+of removing the overlay.
+
+Any other code that retains a pointer to the overlay nodes or data is
+considered to be a bug because after removing the overlay the pointer
+will refer to freed memory.
+
+Users of overlays must be especially aware of the overall operations that
+occur on the system to ensure that other kernel code does not retain any
+pointers to the overlay nodes or data.  Any example of an inadvertent use
+of such pointers is if a driver or subsystem module is loaded after an
+overlay has been applied, and the driver or subsystem scans the entire
+devicetree or a large portion of it, including the overlay nodes.