diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index f70f2e758a00..835b53302db8 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -47,12 +47,6 @@ properties: description: Properties for single LDO regulator. - properties: - regulator-name: - pattern: "^LDO[1-5]$" - description: - should be "LDO1", ..., "LDO5" - unevaluatedProperties: false "^BUCK[1-6]$": @@ -62,11 +56,6 @@ properties: Properties for single BUCK regulator. properties: - regulator-name: - pattern: "^BUCK[1-6]$" - description: - should be "BUCK1", ..., "BUCK6" - nxp,dvs-run-voltage: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 600000 @@ -92,6 +81,17 @@ properties: LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is connected to a host GPIO. + nxp,i2c-lt-enable: + type: boolean + description: + Indicates that the I2C Level Translator is used. + + nxp,wdog_b-warm-reset: + type: boolean + description: + When WDOG_B signal is asserted a warm reset will be done instead of cold + reset. + required: - compatible - reg |