diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/ethernet-controller.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/net/ethernet-controller.yaml | 183 |
1 files changed, 98 insertions, 85 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index b0933a8c295a..4b3c590fcebf 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -13,13 +13,16 @@ properties: $nodename: pattern: "^ethernet(@.*)?$" + label: + $ref: /schemas/types.yaml#/definitions/string + description: Human readable label on a port of a box. + local-mac-address: description: Specifies the MAC address that was assigned to the network device. $ref: /schemas/types.yaml#/definitions/uint8-array - items: - - minItems: 6 - maxItems: 6 + minItems: 6 + maxItems: 6 mac-address: description: @@ -28,9 +31,8 @@ properties: to the device by the boot program is different from the local-mac-address property. $ref: /schemas/types.yaml#/definitions/uint8-array - items: - - minItems: 6 - maxItems: 6 + minItems: 6 + maxItems: 6 max-frame-size: $ref: /schemas/types.yaml#/definitions/uint32 @@ -65,10 +67,12 @@ properties: - gmii - sgmii - qsgmii + - qusgmii - tbi - rev-mii - rmii - rev-rmii + - moca # RX and TX delays are added by the MAC when required - rgmii @@ -103,6 +107,12 @@ properties: phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + phy-handle: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -124,12 +134,6 @@ properties: and is useful for determining certain configuration settings such as flow control thresholds. - rx-internal-delay-ps: - description: | - RGMII Receive Clock Delay defined in pico seconds. - This is used for controllers that have configurable RX internal delays. - If this property is present then the MAC applies the RX delay. - sfp: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -141,12 +145,6 @@ properties: The size of the controller\'s transmit fifo in bytes. This is used for components that can have configurable fifo sizes. - tx-internal-delay-ps: - description: | - RGMII Transmit Clock Delay defined in pico seconds. - This is used for controllers that have configurable TX internal delays. - If this property is present then the MAC applies the TX delay. - managed: description: Specifies the PHY management type. If auto is set and fixed-link @@ -158,73 +156,88 @@ properties: - in-band-status fixed-link: - allOf: - - if: - type: array - then: - deprecated: true - minItems: 1 - maxItems: 1 - items: - items: - - minimum: 0 - maximum: 31 - description: - Emulated PHY ID, choose any but unique to the all - specified fixed-links - - - enum: [0, 1] - description: - Duplex configuration. 0 for half duplex or 1 for - full duplex - - - enum: [10, 100, 1000] - description: - Link speed in Mbits/sec. - - - enum: [0, 1] - description: - Pause configuration. 0 for no pause, 1 for pause - - - enum: [0, 1] - description: - Asymmetric pause configuration. 0 for no asymmetric - pause, 1 for asymmetric pause - - - - if: - type: object - then: - properties: - speed: - description: - Link speed. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [10, 100, 1000] - - full-duplex: - $ref: /schemas/types.yaml#/definitions/flag - description: - Indicates that full-duplex is used. When absent, half - duplex is assumed. - - pause: - $ref: /schemas/types.yaml#definitions/flag - description: - Indicates that pause should be enabled. - - asym-pause: - $ref: /schemas/types.yaml#/definitions/flag - description: - Indicates that asym_pause should be enabled. - - link-gpios: - maxItems: 1 - description: - GPIO to determine if the link is up - - required: - - speed + oneOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + deprecated: true + items: + - minimum: 0 + maximum: 31 + description: + Emulated PHY ID, choose any but unique to the all + specified fixed-links + + - enum: [0, 1] + description: + Duplex configuration. 0 for half duplex or 1 for + full duplex + + - enum: [10, 100, 1000, 2500, 10000] + description: + Link speed in Mbits/sec. + + - enum: [0, 1] + description: + Pause configuration. 0 for no pause, 1 for pause + + - enum: [0, 1] + description: + Asymmetric pause configuration. 0 for no asymmetric + pause, 1 for asymmetric pause + - type: object + additionalProperties: false + properties: + speed: + description: + Link speed. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [10, 100, 1000, 2500, 10000] + + full-duplex: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that full-duplex is used. When absent, half + duplex is assumed. + + pause: + $ref: /schemas/types.yaml#definitions/flag + description: + Indicates that pause should be enabled. + + asym-pause: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that asym_pause should be enabled. + + link-gpios: + maxItems: 1 + description: + GPIO to determine if the link is up + + required: + - speed + +allOf: + - if: + properties: + phy-mode: + contains: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id + then: + properties: + rx-internal-delay-ps: + description: + RGMII Receive Clock Delay defined in pico seconds.This is used for + controllers that have configurable RX internal delays. If this + property is present then the MAC applies the RX delay. + tx-internal-delay-ps: + description: + RGMII Transmit Clock Delay defined in pico seconds.This is used for + controllers that have configurable TX internal delays. If this + property is present then the MAC applies the TX delay. additionalProperties: true |