diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml | 103 |
1 files changed, 71 insertions, 32 deletions
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 452cee1aed32..2225925b6dad 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -15,19 +15,24 @@ properties: enum: - ti,j721e-wiz-16g - ti,j721e-wiz-10g + - ti,am64-wiz-10g + - ti,j7200-wiz-10g power-domains: maxItems: 1 clocks: - maxItems: 3 + minItems: 3 + maxItems: 4 description: clock-specifier to represent input to the WIZ clock-names: + minItems: 3 items: - const: fck - const: core_ref_clk - const: ext_ref_clk + - const: core_ref1_clk num-lanes: minimum: 1 @@ -42,12 +47,21 @@ properties: "#reset-cells": const: 1 + "#clock-cells": + const: 1 + ranges: true assigned-clocks: + minItems: 1 maxItems: 2 assigned-clock-parents: + minItems: 1 + maxItems: 2 + + assigned-clock-rates: + minItems: 1 maxItems: 2 typec-dir-gpios: @@ -67,12 +81,49 @@ properties: Type-C spec states minimum CC pin debounce of 100 ms and maximum of 200 ms. However, some solutions might need more than 200 ms. + refclk-dig: + type: object + additionalProperties: false + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + deprecated: true + properties: + clocks: + minItems: 2 + maxItems: 4 + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing + the inputs to refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + + ti,scm: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + phandle to System Control Module for syscon regmap access. + patternProperties: "^pll[0|1]-refclk$": type: object + additionalProperties: false description: | WIZ node should have subnodes for each of the PLLs present in the SERDES. + deprecated: true properties: clocks: maxItems: 2 @@ -95,9 +146,11 @@ patternProperties: "^cmn-refclk1?-dig-div$": type: object + additionalProperties: false description: WIZ node should have subnodes for each of the PMA common refclock provided by the SERDES. + deprecated: true properties: clocks: maxItems: 1 @@ -111,42 +164,15 @@ patternProperties: - clocks - "#clock-cells" - "^refclk-dig$": - type: object - description: | - WIZ node should have subnode for refclk_dig to select the reference - clock source for the reference clock used in the PHY and PMA digital - logic. - properties: - clocks: - maxItems: 4 - description: Phandle to four clock nodes representing the inputs to - refclk_dig - - "#clock-cells": - const: 0 - - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - - required: - - clocks - - "#clock-cells" - - assigned-clocks - - assigned-clock-parents - "^serdes@[0-9a-f]+$": type: object description: | WIZ node should have '1' subnode for the SERDES. It could be either Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the bindings specified in - Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt + Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml Torrent SERDES should follow the bindings specified in - Documentation/devicetree/bindings/phy/phy-cadence-dp.txt + Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml required: - compatible @@ -159,6 +185,18 @@ required: - "#reset-cells" - ranges +allOf: + - if: + properties: + compatible: + contains: + const: ti,j7200-wiz-10g + then: + required: + - ti,scm + +additionalProperties: false + examples: - | #include <dt-bindings/soc/ti,sci_pm_domain.h> @@ -201,14 +239,15 @@ examples: }; refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, + <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; assigned-clock-parents = <&k3_clks 292 11>; }; serdes@5000000 { - compatible = "cdns,ti,sierra-phy-t0"; + compatible = "ti,sierra-phy-t0"; reg-names = "serdes"; reg = <0x5000000 0x10000>; #address-cells = <1>; |