1 files changed, 0 insertions, 40 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt b/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
deleted file mode 100644
index 6048f636783f..000000000000
--- a/Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Motorola CPCAP PMIC battery charger binding
-
-Required properties:
-- compatible: Shall be "motorola,mapphone-cpcap-charger"
-- interrupts: Interrupt specifier for each name in interrupt-names
-- interrupt-names: Should contain the following entries:
-		   "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		   "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-		   "battdetb"
-- io-channels: IIO ADC channel specifier for each name in io-channel-names
-- io-channel-names: Should contain the following entries:
-		    "battdetb", "battp", "vbus", "chg_isense", "batti"
-
-Optional properties:
-- mode-gpios: Optionally CPCAP charger can have a companion wireless
-	      charge controller that is controlled with two GPIOs
-	      that are active low.
-
-Example:
-
-cpcap_charger: charger {
-	compatible = "motorola,mapphone-cpcap-charger";
-	interrupts-extended = <
-		&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
-		&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
-		&cpcap 54 0
-	>;
-	interrupt-names =
-		"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-		"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-		"battdetb";
-	mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
-		      &gpio3 23 GPIO_ACTIVE_LOW>;
-	io-channels = <&cpcap_adc 0 &cpcap_adc 1
-		       &cpcap_adc 2 &cpcap_adc 5
-		       &cpcap_adc 6>;
-	io-channel-names = "battdetb", "battp",
-			   "vbus", "chg_isense",
-			   "batti";
-};