diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-385-turris-omnia.dts')
| -rw-r--r-- | arch/arm/boot/dts/armada-385-turris-omnia.dts | 53 |
1 files changed, 43 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 5bd6a66d2c2b..72ac807cae25 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -71,16 +71,19 @@ pcie@1,0 { /* Port 0, Lane 0 */ status = "okay"; + slot-power-limit-milliwatt = <10000>; }; pcie@2,0 { /* Port 1, Lane 0 */ status = "okay"; + slot-power-limit-milliwatt = <10000>; }; pcie@3,0 { /* Port 2, Lane 0 */ status = "okay"; + slot-power-limit-milliwatt = <10000>; }; }; }; @@ -102,6 +105,33 @@ */ status = "disabled"; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&audio_controller 1>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&audio_controller { + /* Pin header U16, GPIO51 in SPDIFO mode */ + pinctrl-0 = <&spdif_pins>; + pinctrl-names = "default"; + spdif-mode; + status = "okay"; }; &bm { @@ -163,6 +193,7 @@ buffer-manager = <&bm>; bm,pool-long = <2>; bm,pool-short = <3>; + label = "wan"; }; &i2c0 { @@ -188,15 +219,13 @@ reg = <0x2b>; #address-cells = <1>; #size-cells = <0>; + status = "okay"; /* * LEDs are controlled by MCU (STM32F0) at * address 0x2b. * - * The driver does not support HW control mode - * for the LEDs yet. Disable the LEDs for now. - * - * Also LED functions are not stable yet: + * LED functions are not stable yet: * - there are 3 LEDs connected via MCU to PCIe * ports. One of these ports supports mSATA. * There is no mSATA nor PCIe function. @@ -207,7 +236,6 @@ * B. Again there is no such function defined. * For now we use LED_FUNCTION_INDICATOR */ - status = "disabled"; multi-led@0 { reg = <0x0>; @@ -345,7 +373,11 @@ #size-cells = <0>; reg = <5>; - /* ATSHA204A at address 0x64 */ + /* ATSHA204A-MAHDA-T crypto module */ + crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; }; i2c@6 { @@ -390,7 +422,8 @@ phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - marvell,reg-init = <3 18 0 0x4985>; + marvell,reg-init = <3 18 0 0x4985>, + <3 16 0xfff0 0x0001>; /* irq is connected to &pcawan pin 7 */ }; @@ -471,7 +504,7 @@ marvell,function = "spi0"; }; - spi0cs1_pins: spi0cs1-pins { + spi0cs2_pins: spi0cs2-pins { marvell,pins = "mpp26"; marvell,function = "spi0"; }; @@ -482,7 +515,7 @@ pinctrl-0 = <&spi0_pins &spi0cs0_pins>; status = "okay"; - spi-nor@0 { + flash@0 { compatible = "spansion,s25fl164k", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; @@ -506,7 +539,7 @@ }; }; - /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ + /* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */ }; &uart0 { |