diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-sama7g5ek.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-sama7g5ek.dts | 79 |
1 files changed, 64 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index ccf9e224da78..3b25c67795dd 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -14,6 +14,7 @@ #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/sound/microchip,pdmc.h> / { model = "Microchip SAMA7G5-EK"; @@ -44,13 +45,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; @@ -131,6 +132,18 @@ status = "okay"; }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can0_default>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1_default>; + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; }; @@ -231,14 +244,15 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; regulator-state-standby { regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; regulator-mode = <4>; }; @@ -250,8 +264,8 @@ vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -271,14 +285,15 @@ vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; regulator-state-standby { regulator-on-in-suspend; + regulator-suspend-voltage = <1150000>; regulator-mode = <4>; }; @@ -290,8 +305,8 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; - regulator-min-microvolt = <1125000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -299,6 +314,7 @@ regulator-state-standby { regulator-on-in-suspend; + regulator-suspend-voltage = <1050000>; regulator-mode = <4>; }; @@ -310,11 +326,12 @@ vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-standby { + regulator-suspend-voltage = <1800000>; regulator-on-in-suspend; }; @@ -329,6 +346,7 @@ regulator-max-microvolt = <3700000>; regulator-state-standby { + regulator-suspend-voltage = <1800000>; regulator-on-in-suspend; }; @@ -439,7 +457,7 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; - status = "okay"; + status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { reg = <0x0>; @@ -453,7 +471,31 @@ pinctrl-0 = <&pinctrl_i2s0_default>; }; +&pdmc0 { + #sound-dai-cells = <0>; + microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */ + <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */ + <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */ + <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */ + status = "disabled"; /* Conflict with gmac1. */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdmc0_default>; +}; + &pioA { + + pinctrl_can0_default: can0_default { + pinmux = <PIN_PD12__CANTX0>, + <PIN_PD13__CANRX0 >; + bias-disable; + }; + + pinctrl_can1_default: can1_default { + pinmux = <PIN_PD14__CANTX1>, + <PIN_PD15__CANRX1 >; + bias-disable; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PE3__FLEXCOM0_IO0>, <PIN_PE4__FLEXCOM0_IO1>, @@ -465,7 +507,7 @@ pinctrl_flx3_default: flx3_default { pinmux = <PIN_PD16__FLEXCOM3_IO0>, <PIN_PD17__FLEXCOM3_IO1>; - bias-disable; + bias-pull-up; }; pinctrl_flx4_default: flx4_default { @@ -609,6 +651,13 @@ bias-disable; }; + pinctrl_pdmc0_default: pdmc0_default { + pinmux = <PIN_PD23__PDMC0_DS0>, + <PIN_PD24__PDMC0_DS1>, + <PIN_PD22__PDMC0_CLK>; + bias_disable; + }; + pinctrl_qspi: qspi { pinmux = <PIN_PB12__QSPI0_IO0>, <PIN_PB11__QSPI0_IO1>, @@ -625,7 +674,7 @@ <PIN_PB21__QSPI0_INT>; bias-disable; slew-rate = <0>; - atmel,drive-strength = <ATMEL_PIO_DRVSTR_HI>; + atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>; }; pinctrl_sdmmc0_default: sdmmc0_default { |