diff options
Diffstat (limited to 'arch/arm/mach-at91rm9200/board-dk.c')
| -rw-r--r-- | arch/arm/mach-at91rm9200/board-dk.c | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c deleted file mode 100644 index 7522bf91bce8..000000000000 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * linux/arch/arm/mach-at91rm9200/board-dk.c - * - * Copyright (C) 2005 SAN People - * - * Epson S1D framebuffer glue code is: - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/mtd/physmap.h> - -#include <asm/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/arch/board.h> -#include <asm/arch/gpio.h> -#include <asm/arch/at91rm9200_mc.h> - -#include "generic.h" - - -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata dk_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - -static void __init dk_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); - - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - - /* Setup the serial ports and console */ - at91_init_serial(&dk_uart_config); -} - -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - -static struct at91_eth_data __initdata dk_eth_data = { - .phy_irq_pin = AT91_PIN_PC4, - .is_rmii = 1, -}; - -static struct at91_usbh_data __initdata dk_usbh_data = { - .ports = 2, -}; - -static struct at91_udc_data __initdata dk_udc_data = { - .vbus_pin = AT91_PIN_PD4, - .pullup_pin = AT91_PIN_PD5, -}; - -static struct at91_cf_data __initdata dk_cf_data = { - .det_pin = AT91_PIN_PB0, - .rst_pin = AT91_PIN_PC5, - // .irq_pin = ... not connected - // .vcc_pin = ... always powered -}; - -static struct at91_mmc_data __initdata dk_mmc_data = { - .slot_b = 0, - .wire4 = 1, -}; - -static struct spi_board_info dk_spi_devices[] = { - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - }, - { /* UR6HCPS2-SP40 PS2-to-SPI adapter */ - .modalias = "ur6hcps2", - .chip_select = 1, - .max_speed_hz = 250 * 1000, - }, - { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */ - .modalias = "tlv1504", - .chip_select = 2, - .max_speed_hz = 20 * 1000 * 1000, - }, -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - { /* DataFlash card */ - .modalias = "mtd_dataflash", - .chip_select = 3, - .max_speed_hz = 15 * 1000 * 1000, - } -#endif -}; - -static struct mtd_partition __initdata dk_nand_partition[] = { - { - .name = "NAND Partition 1", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct mtd_partition *nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(dk_nand_partition); - return dk_nand_partition; -} - -static struct at91_nand_data __initdata dk_nand_data = { - .ale = 22, - .cle = 21, - .det_pin = AT91_PIN_PB1, - .rdy_pin = AT91_PIN_PC2, - // .enable_pin = ... not there - .partition_info = nand_partitions, -}; - -#define DK_FLASH_BASE AT91_CHIPSELECT_0 -#define DK_FLASH_SIZE 0x200000 - -static struct physmap_flash_data dk_flash_data = { - .width = 2, -}; - -static struct resource dk_flash_resource = { - .start = DK_FLASH_BASE, - .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device dk_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &dk_flash_data, - }, - .resource = &dk_flash_resource, - .num_resources = 1, -}; - - -static void __init dk_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* Ethernet */ - at91_add_device_eth(&dk_eth_data); - /* USB Host */ - at91_add_device_usbh(&dk_usbh_data); - /* USB Device */ - at91_add_device_udc(&dk_udc_data); - at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ - /* Compact Flash */ - at91_add_device_cf(&dk_cf_data); - /* I2C */ - at91_add_device_i2c(); - /* SPI */ - at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB7, 0); -#else - /* MMC */ - at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(&dk_mmc_data); -#endif - /* NAND */ - at91_add_device_nand(&dk_nand_data); - /* NOR Flash */ - platform_device_register(&dk_flash); - /* VGA */ -// dk_add_device_video(); -} - -MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") - /* Maintainer: SAN People/Atmel */ - .phys_io = AT91_BASE_SYS, - .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91rm9200_timer, - .map_io = dk_map_io, - .init_irq = dk_init_irq, - .init_machine = dk_board_init, -MACHINE_END |