1166 files changed, 46792 insertions, 28303 deletions

diff --git a/arch/alpha/kernel/core_mcpcia.c b/arch/alpha/kernel/core_mcpcia.c
index 8d019071190a..381fec0af52e 100644
--- a/arch/alpha/kernel/core_mcpcia.c
+++ b/arch/alpha/kernel/core_mcpcia.c
@@ -40,8 +40,6 @@
 # define DBG_CFG(args)
 #endif
 
-#define MCPCIA_MAX_HOSES 4
-
 /*
  * Given a bus, device, and function number, compute resulting
  * configuration space address and setup the MCPCIA_HAXR2 register
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index febe71c6869f..543d96d7fa2b 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -16,6 +16,7 @@
 #include <asm/smp.h>
 #include <asm/err_common.h>
 #include <asm/err_ev6.h>
+#include <asm/irq_regs.h>
 
 #include "err_impl.h"
 #include "proto.h"
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index aac6d4b22f7a..bd03dc94c72b 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -285,12 +285,12 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 		reloc_overflow:
 			if (ELF64_ST_TYPE (sym->st_info) == STT_SECTION)
 			  printk(KERN_ERR
-			         "module %s: Relocation overflow vs section %d\n",
-			         me->name, sym->st_shndx);
+			         "module %s: Relocation (type %lu) overflow vs section %d\n",
+			         me->name, r_type, sym->st_shndx);
 			else
 			  printk(KERN_ERR
-			         "module %s: Relocation overflow vs %s\n",
-			         me->name, strtab + sym->st_name);
+			         "module %s: Relocation (type %lu) overflow vs %s\n",
+			         me->name, r_type, strtab + sym->st_name);
 			return -ENOEXEC;
 		}
 	}
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index e7594a7cf585..920196bcbb61 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -70,6 +70,12 @@ nautilus_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/* Preserve the IRQ set up by the console.  */
 
 	u8 irq;
+	/* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as
+	   console reports. Check the device id of AGP bridge to distinguish
+	   UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */
+	if (slot == 1 && pin == 2 &&
+	    dev->bus->self && dev->bus->self->device == 0x700f)
+		return 5;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	return irq;
 }
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index de6ba3432e8a..eb2a1d63f484 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -66,6 +66,13 @@ noritake_startup_irq(unsigned int irq)
 	return 0;
 }
 
+static void
+noritake_end_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                noritake_enable_irq(irq);
+}
+
 static struct hw_interrupt_type noritake_irq_type = {
 	.typename	= "NORITAKE",
 	.startup	= noritake_startup_irq,
@@ -73,7 +80,7 @@ static struct hw_interrupt_type noritake_irq_type = {
 	.enable		= noritake_enable_irq,
 	.disable	= noritake_disable_irq,
 	.ack		= noritake_disable_irq,
-	.end		= noritake_enable_irq,
+	.end		= noritake_end_irq,
 };
 
 static void 
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index 581d08c70b92..672cb2df53df 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -52,6 +52,9 @@ rawhide_update_irq_hw(int hose, int mask)
 	*(vuip)MCPCIA_INT_MASK0(MCPCIA_HOSE2MID(hose));
 }
 
+#define hose_exists(h) \
+  (((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
+
 static inline void 
 rawhide_enable_irq(unsigned int irq)
 {
@@ -59,6 +62,9 @@ rawhide_enable_irq(unsigned int irq)
 
 	irq -= 16;
 	hose = irq / 24;
+	if (!hose_exists(hose)) /* if hose non-existent, exit */
+		return;
+
 	irq -= hose * 24;
 	mask = 1 << irq;
 
@@ -76,6 +82,9 @@ rawhide_disable_irq(unsigned int irq)
 
 	irq -= 16;
 	hose = irq / 24;
+	if (!hose_exists(hose)) /* if hose non-existent, exit */
+		return;
+
 	irq -= hose * 24;
 	mask = ~(1 << irq) | hose_irq_masks[hose];
 
@@ -93,6 +102,9 @@ rawhide_mask_and_ack_irq(unsigned int irq)
 
 	irq -= 16;
 	hose = irq / 24;
+	if (!hose_exists(hose)) /* if hose non-existent, exit */
+		return;
+
 	irq -= hose * 24;
 	mask1 = 1 << irq;
 	mask = ~mask1 | hose_irq_masks[hose];
@@ -169,6 +181,9 @@ rawhide_init_irq(void)
 
 	mcpcia_init_hoses();
 
+	/* Clear them all; only hoses that exist will be non-zero. */
+	for (i = 0; i < MCPCIA_MAX_HOSES; i++) cached_irq_masks[i] = 0;
+
 	for (hose = hose_head; hose; hose = hose->next) {
 		unsigned int h = hose->index;
 		unsigned int mask = hose_irq_masks[h];
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
index a654014d202a..14b5a753aba5 100644
--- a/arch/alpha/kernel/sys_sio.c
+++ b/arch/alpha/kernel/sys_sio.c
@@ -84,12 +84,16 @@ alphabook1_init_arch(void)
 static void __init
 sio_pci_route(void)
 {
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	/* First, read and save the original setting. */
+	unsigned int orig_route_tab;
+
+	/* First, ALWAYS read and print the original setting. */
 	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				  &saved_config.orig_route_tab);
+				  &orig_route_tab);
 	printk("%s: PIRQ original 0x%x new 0x%x\n", __FUNCTION__,
-	       saved_config.orig_route_tab, alpha_mv.sys.sio.route_tab);
+	       orig_route_tab, alpha_mv.sys.sio.route_tab);
+
+#if defined(ALPHA_RESTORE_SRM_SETUP)
+	saved_config.orig_route_tab = orig_route_tab;
 #endif
 
 	/* Now override with desired setting. */
@@ -334,7 +338,7 @@ struct alpha_machine_vector avanti_mv __initmv = {
 	.pci_swizzle		= common_swizzle,
 
 	.sys = { .sio = {
-		.route_tab	= 0x0b0a0e0f,
+		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
 	}}
 };
 ALIAS_MV(avanti)
diff --git a/arch/alpha/kernel/sys_sx164.c b/arch/alpha/kernel/sys_sx164.c
index 94ad68b7c0ae..41d4ad4c7c44 100644
--- a/arch/alpha/kernel/sys_sx164.c
+++ b/arch/alpha/kernel/sys_sx164.c
@@ -132,7 +132,7 @@ sx164_init_arch(void)
 
 	if (amask(AMASK_MAX) != 0
 	    && alpha_using_srm
-	    && (cpu->pal_revision & 0xffff) == 0x117) {
+	    && (cpu->pal_revision & 0xffff) <= 0x117) {
 		__asm__ __volatile__(
 		"lda	$16,8($31)\n"
 		"call_pal 9\n"		/* Allow PALRES insns in kernel mode */
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 29ab7db81c30..f009b7bc0943 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -257,8 +257,7 @@ titan_dispatch_irqs(u64 mask)
 	 */
 	while (mask) {
 		/* convert to SRM vector... priority is <63> -> <0> */
-		__asm__("ctlz %1, %0" : "=r"(vector) : "r"(mask));
-		vector = 63 - vector;
+		vector = 63 - __kernel_ctlz(mask);
 		mask &= ~(1UL << vector);	/* clear it out 	 */
 		vector = 0x900 + (vector << 4);	/* convert to SRM vector */
 		
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index 21cf624d7329..ea098f3b629f 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -36,7 +36,6 @@ lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
 	$(ev6-y)csum_ipv6_magic.o \
 	$(ev6-y)clear_page.o \
 	$(ev6-y)copy_page.o \
-	strcasecmp.o \
 	fpreg.o \
 	callback_srm.o srm_puts.o srm_printk.o
 
diff --git a/arch/alpha/lib/strcasecmp.c b/arch/alpha/lib/strcasecmp.c
deleted file mode 100644
index 4e57a216feaf..000000000000
--- a/arch/alpha/lib/strcasecmp.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/arch/alpha/lib/strcasecmp.c
- */
-
-#include <linux/string.h>
-
-
-/* We handle nothing here except the C locale.  Since this is used in
-   only one place, on strings known to contain only 7 bit ASCII, this
-   is ok.  */
-
-int strcasecmp(const char *a, const char *b)
-{
-	int ca, cb;
-
-	do {
-		ca = *a++ & 0xff;
-		cb = *b++ & 0xff;
-		if (ca >= 'A' && ca <= 'Z')
-			ca += 'a' - 'A';
-		if (cb >= 'A' && cb <= 'Z')
-			cb += 'a' - 'A';
-	} while (ca == cb && ca != '\0');
-
-	return ca - cb;
-}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5c795193ebba..e7baca29f3fb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -21,6 +21,10 @@ config ARM
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
+config GENERIC_GPIO
+	bool
+	default n
+
 config GENERIC_TIME
 	bool
 	default n
@@ -163,6 +167,7 @@ config ARCH_VERSATILE
 
 config ARCH_AT91
 	bool "Atmel AT91"
+	select GENERIC_GPIO
 	help
 	  This enables support for systems based on the Atmel AT91RM9200
 	  and AT91SAM9xxx processors.
@@ -171,6 +176,7 @@ config ARCH_CLPS7500
 	bool "Cirrus CL-PS7500FE"
 	select TIMER_ACORN
 	select ISA
+	select NO_IOPORT
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -189,6 +195,7 @@ config ARCH_CO285
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select ISA
+	select NO_IOPORT
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -245,6 +252,8 @@ config ARCH_IOP33X
 
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
+	depends on MMU
+	select PLAT_IOP
 	select PCI
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
@@ -283,6 +292,14 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_NS9XXX
+	bool "NetSilicon NS9xxx"
+	help
+	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+	  System.
+
+	  <http://www.digi.com/products/microprocessors/index.jsp>
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	help
@@ -292,6 +309,8 @@ config ARCH_PXA
 	bool "PXA2xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
+	select GENERIC_TIME
 	help
 	  Support for Intel's PXA2XX processor line.
 
@@ -312,11 +331,13 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_MTD_XIP
+	select GENERIC_GPIO
 	help
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+	select GENERIC_GPIO
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -341,6 +362,7 @@ config ARCH_LH7A40X
 
 config ARCH_OMAP
 	bool "TI OMAP"
+	select GENERIC_GPIO
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -376,7 +398,16 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
@@ -390,10 +421,12 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
+source "arch/arm/mach-ns9xxx/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -405,7 +438,7 @@ source arch/arm/mm/Kconfig
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends CPU_XSCALE || CPU_XSC3
+	depends on CPU_XSCALE || CPU_XSC3
 	default y if PXA27x
 	help
 	  Enable support for iWMMXt context switching at run time if
@@ -751,6 +784,20 @@ config XIP_PHYS_ADDR
 	  be linked for and stored to.  This address is dependent on your
 	  own flash usage.
 
+config KEXEC
+	bool "Kexec system call (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is indepedent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  It may help to enable device hotplugging
+	  support.
+
 endmenu
 
 if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 000f1100b553..ab9f2d4bd04e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -124,10 +124,12 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)       := at91rm9200
- machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
- machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
- machine-$(CONFIG_ARCH_NETX)       := netx
+ machine-$(CONFIG_ARCH_AT91)	   := at91
+ machine-$(CONFIG_ARCH_EP93XX)	   := ep93xx
+ machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
+ machine-$(CONFIG_ARCH_NETX)	   := netx
+ machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
+ textofs-$(CONFIG_ARCH_NS9XXX)	   := 0x00108000
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -149,7 +151,7 @@ MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
-  
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -161,6 +163,11 @@ endif
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= $(MACHINE)
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
@@ -168,6 +175,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 # If we have a common platform directory, then include it in the build.
 core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
+core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
new file mode 100644
index 000000000000..171a0853caf8
--- /dev/null
+++ b/arch/arm/boot/.gitignore
@@ -0,0 +1,2 @@
+Image
+zImage
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
new file mode 100644
index 000000000000..aefee20cbf98
--- /dev/null
+++ b/arch/arm/boot/compressed/.gitignore
@@ -0,0 +1 @@
+piggy.gz
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 5e34ca6d38b6..3e073467caca 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -28,6 +28,7 @@ config SHARP_PARAM
 
 config SHARPSL_PM
 	bool
+	select APM_EMULATION
 
 config SHARP_SCOOP
 	bool
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2e635b814c14..6fbe7722aa44 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -32,7 +32,6 @@
 
 #include <asm/cacheflush.h>
 
-#undef DEBUG
 #undef STATS
 
 #ifdef STATS
@@ -66,14 +65,13 @@ struct dmabounce_pool {
 };
 
 struct dmabounce_device_info {
-	struct list_head node;
-
 	struct device *dev;
 	struct list_head safe_buffers;
 #ifdef STATS
 	unsigned long total_allocs;
 	unsigned long map_op_count;
 	unsigned long bounce_count;
+	int attr_res;
 #endif
 	struct dmabounce_pool	small;
 	struct dmabounce_pool	large;
@@ -81,33 +79,23 @@ struct dmabounce_device_info {
 	rwlock_t lock;
 };
 
-static LIST_HEAD(dmabounce_devs);
-
 #ifdef STATS
-static void print_alloc_stats(struct dmabounce_device_info *device_info)
+static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
 {
-	printk(KERN_INFO
-		"%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
-		device_info->dev->bus_id,
-		device_info->small.allocs, device_info->large.allocs,
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+	return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
+		device_info->small.allocs,
+		device_info->large.allocs,
 		device_info->total_allocs - device_info->small.allocs -
 			device_info->large.allocs,
-		device_info->total_allocs);
+		device_info->total_allocs,
+		device_info->map_op_count,
+		device_info->bounce_count);
 }
-#endif
-
-/* find the given device in the dmabounce device list */
-static inline struct dmabounce_device_info *
-find_dmabounce_dev(struct device *dev)
-{
-	struct dmabounce_device_info *d;
 
-	list_for_each_entry(d, &dmabounce_devs, node)
-		if (d->dev == dev)
-			return d;
-
-	return NULL;
-}
+static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
+#endif
 
 
 /* allocate a 'safe' buffer and keep track of it */
@@ -162,8 +150,6 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
 	if (pool)
 		pool->allocs++;
 	device_info->total_allocs++;
-	if (device_info->total_allocs % 1000 == 0)
-		print_alloc_stats(device_info);
 #endif
 
 	write_lock_irqsave(&device_info->lock, flags);
@@ -218,20 +204,11 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
 
 /* ************************************************** */
 
-#ifdef STATS
-static void print_map_stats(struct dmabounce_device_info *device_info)
-{
-	dev_info(device_info->dev,
-		"dmabounce: map_op_count=%lu, bounce_count=%lu\n",
-		device_info->map_op_count, device_info->bounce_count);
-}
-#endif
-
 static inline dma_addr_t
 map_single(struct device *dev, void *ptr, size_t size,
 		enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	dma_addr_t dma_addr;
 	int needs_bounce = 0;
 
@@ -281,10 +258,14 @@ map_single(struct device *dev, void *ptr, size_t size,
 		ptr = buf->safe;
 
 		dma_addr = buf->safe_dma_addr;
+	} else {
+		/*
+		 * We don't need to sync the DMA buffer since
+		 * it was allocated via the coherent allocators.
+		 */
+		consistent_sync(ptr, size, dir);
 	}
 
-	consistent_sync(ptr, size, dir);
-
 	return dma_addr;
 }
 
@@ -292,7 +273,7 @@ static inline void
 unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
 
 	/*
@@ -317,12 +298,12 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		DO_STATS ( device_info->bounce_count++ );
 
 		if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-			unsigned long ptr;
+			void *ptr = buf->ptr;
 
 			dev_dbg(dev,
 				"%s: copy back safe %p to unsafe %p size %d\n",
-				__func__, buf->safe, buf->ptr, size);
-			memcpy(buf->ptr, buf->safe, size);
+				__func__, buf->safe, ptr, size);
+			memcpy(ptr, buf->safe, size);
 
 			/*
 			 * DMA buffers must have the same cache properties
@@ -332,8 +313,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 			 * bidirectional case because we know the cache
 			 * lines will be coherent with the data written.
 			 */
-			ptr = (unsigned long)buf->ptr;
 			dmac_clean_range(ptr, ptr + size);
+			outer_clean_range(__pa(ptr), __pa(ptr) + size);
 		}
 		free_safe_buffer(device_info, buf);
 	}
@@ -343,7 +324,7 @@ static inline void
 sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
 	struct safe_buffer *buf = NULL;
 
 	if (device_info)
@@ -397,7 +378,10 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		default:
 			BUG();
 		}
-		consistent_sync(buf->safe, size, dir);
+		/*
+		 * No need to sync the safe buffer - it was allocated
+		 * via the coherent allocators.
+		 */
 	} else {
 		consistent_sync(dma_to_virt(dev, dma_addr), size, dir);
 	}
@@ -604,9 +588,10 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 	device_info->total_allocs = 0;
 	device_info->map_op_count = 0;
 	device_info->bounce_count = 0;
+	device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
 #endif
 
-	list_add(&device_info->node, &dmabounce_devs);
+	dev->archdata.dmabounce = device_info;
 
 	printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
 		dev->bus_id, dev->bus->name);
@@ -623,7 +608,9 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 void
 dmabounce_unregister_dev(struct device *dev)
 {
-	struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+
+	dev->archdata.dmabounce = NULL;
 
 	if (!device_info) {
 		printk(KERN_WARNING
@@ -645,12 +632,10 @@ dmabounce_unregister_dev(struct device *dev)
 		dma_pool_destroy(device_info->large.pool);
 
 #ifdef STATS
-	print_alloc_stats(device_info);
-	print_map_stats(device_info);
+	if (device_info->attr_res == 0)
+		device_remove_file(dev, &dev_attr_dmabounce_stats);
 #endif
 
-	list_del(&device_info->node);
-
 	kfree(device_info);
 
 	printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 09b9d1b6844c..4deece5fbdf4 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -14,7 +14,9 @@
  *
  * o There is one CPU Interface per CPU, which sends interrupts sent
  *   by the Distributor, and interrupts generated locally, to the
- *   associated CPU.
+ *   associated CPU. The base address of the CPU interface is usually
+ *   aliased so that the same address points to different chips depending
+ *   on the CPU it is accessed from.
  *
  * Note that IRQs 0-31 are special - they are local to each CPU.
  * As such, the enable set/clear, pending set/clear and active bit
@@ -31,10 +33,38 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static void __iomem *gic_dist_base;
-static void __iomem *gic_cpu_base;
 static DEFINE_SPINLOCK(irq_controller_lock);
 
+struct gic_chip_data {
+	unsigned int irq_offset;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR	1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR];
+
+static inline void __iomem *gic_dist_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->dist_base;
+}
+
+static inline void __iomem *gic_cpu_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->cpu_base;
+}
+
+static inline unsigned int gic_irq(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return irq - gic_data->irq_offset;
+}
+
 /*
  * Routines to acknowledge, disable and enable interrupts
  *
@@ -55,8 +85,8 @@ static void gic_ack_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
-	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -65,7 +95,7 @@ static void gic_mask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -74,14 +104,14 @@ static void gic_unmask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
 #ifdef CONFIG_SMP
 static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 {
-	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = first_cpu(mask_val);
 	u32 val;
@@ -95,6 +125,37 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 }
 #endif
 
+static void fastcall gic_handle_cascade_irq(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct gic_chip_data *chip_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+	unsigned int cascade_irq;
+	unsigned long status;
+
+	/* primary controller ack'ing */
+	chip->ack(irq);
+
+	spin_lock(&irq_controller_lock);
+	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+	spin_unlock(&irq_controller_lock);
+
+	cascade_irq = (status & 0x3ff);
+	if (cascade_irq > 1020)
+		goto out;
+	if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
+		do_bad_IRQ(cascade_irq, desc);
+		goto out;
+	}
+
+	cascade_irq += chip_data->irq_offset;
+	generic_handle_irq(cascade_irq);
+
+ out:
+	/* primary controller unmasking */
+	chip->unmask(irq);
+}
+
 static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
@@ -105,15 +166,29 @@ static struct irq_chip gic_chip = {
 #endif
 };
 
-void __init gic_dist_init(void __iomem *base)
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+	if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
+		BUG();
+	set_irq_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
+			  unsigned int irq_start)
 {
 	unsigned int max_irq, i;
 	u32 cpumask = 1 << smp_processor_id();
 
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	gic_dist_base = base;
+	gic_data[gic_nr].dist_base = base;
+	gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
 
 	writel(0, base + GIC_DIST_CTRL);
 
@@ -158,8 +233,9 @@ void __init gic_dist_init(void __iomem *base)
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = 29; i < max_irq; i++) {
+	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
+		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
@@ -167,9 +243,13 @@ void __init gic_dist_init(void __iomem *base)
 	writel(1, base + GIC_DIST_CTRL);
 }
 
-void __cpuinit gic_cpu_init(void __iomem *base)
+void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
-	gic_cpu_base = base;
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	gic_data[gic_nr].cpu_base = base;
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }
@@ -179,6 +259,7 @@ void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(cpumask);
 
-	writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+	/* this always happens on GIC0 */
+	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index a3b450f8ef17..5972df2b9af4 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -23,11 +23,11 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
-#include <asm/apm-emulation.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>
@@ -766,10 +766,10 @@ static void sharpsl_apm_get_power_status(struct apm_power_info *info)
 }
 
 static struct pm_ops sharpsl_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
 	.prepare	= pxa_pm_prepare,
 	.enter		= corgi_pxa_pm_enter,
 	.finish		= pxa_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init sharpsl_pm_probe(struct platform_device *pdev)
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
new file mode 100644
index 000000000000..c72ab82873d5
--- /dev/null
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -0,0 +1,1184 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Mon Jan  8 16:06:54 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 3de5c643848c..baa97698c744 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 2cadd51506bb..88e5d28aeec7 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
 
 #
 # Self-contained MTD device drivers
@@ -986,7 +988,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 94908c1df4cf..669f035896f9 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
 
 #
 # Self-contained MTD device drivers
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index a4cdafc1548a..a0f48d54fbcc 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -718,7 +718,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
new file mode 100644
index 000000000000..0e5794c6a48e
--- /dev/null
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -0,0 +1,621 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Feb 15 20:51:47 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_NS9XXX=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# NS9xxx Implementations
+#
+CONFIG_MACH_CC9P9360DEV=y
+CONFIG_PROCESSOR_NS9360=y
+CONFIG_BOARD_A9M9750DEV=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_ICEDCC=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 3b31a33d0080..a850da377a29 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,18 +1,24 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Fri Nov  3 17:41:31 2006
+# Linux kernel version: 2.6.21-rc6
+# Mon Apr  9 10:12:58 2007
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -31,19 +37,22 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,7 +85,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -110,10 +121,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -122,54 +135,75 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_S3C244X=y
+CONFIG_PM_SIMTEC=y
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
 
 #
-# S3C24XX Implementations
+# S3C2400 Machines
 #
-# CONFIG_MACH_AML_M5900 is not set
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_ARCH_BAST=y
-CONFIG_BAST_PC104_IRQ=y
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
+CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_MACH_SMDK=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_SMDK2440_CPU2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_S3C2413=y
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_RX3715=y
+CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_VSTMS=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2410_PM=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2412_PM=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_BAST_PC104_IRQ=y
+CONFIG_MACH_VR1000=y
+CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C244X=y
+CONFIG_S3C2412_DMA=y
+CONFIG_S3C2412_PM=y
+
+#
+# S3C2412 Machines
+#
+CONFIG_MACH_SMDK2413=y
+CONFIG_MACH_S3C2413=y
+CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
+CONFIG_S3C2440_DMA=y
+
+#
+# S3C2440 Machines
+#
+CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_RX3715=y
+CONFIG_ARCH_S3C2440=y
+CONFIG_MACH_NEXCODER_2440=y
+CONFIG_SMDK2440_CPU2440=y
 CONFIG_CPU_S3C2442=y
 
 #
-# S3C2410 Boot
+# S3C2442 Machines
 #
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+CONFIG_SMDK2440_CPU2442=y
+CONFIG_CPU_S3C2443=y
+CONFIG_S3C2443_DMA=y
 
 #
-# S3C2410 Setup
+# S3C2443 Machines
 #
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_MACH_SMDK2443=y
 
 #
 # Processor Type
@@ -196,6 +230,7 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
@@ -224,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -233,6 +269,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -261,7 +298,7 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM=y
+# CONFIG_APM_EMULATION is not set
 
 #
 # Networking
@@ -277,6 +314,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -303,6 +341,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -360,6 +399,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -385,6 +425,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -478,6 +519,7 @@ CONFIG_PARPORT_1284=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -491,7 +533,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 
@@ -520,7 +561,6 @@ CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -531,6 +571,11 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_SCSI_NETLINK is not set
 
 #
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
@@ -647,6 +692,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -682,7 +728,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -700,13 +746,14 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
 # CONFIG_SERIAL_8250_FOURPORT is not set
 # CONFIG_SERIAL_8250_ACCENT is not set
 # CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
 # CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -755,10 +802,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -818,12 +861,13 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
-CONFIG_SPI_S3C24XX_GPIO=m
 CONFIG_SPI_S3C24XX=m
+CONFIG_SPI_S3C24XX_GPIO=m
 
 #
 # SPI Protocol Masters
 #
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -839,6 +883,7 @@ CONFIG_HWMON_VID=m
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -863,6 +908,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -870,6 +916,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -878,7 +925,11 @@ CONFIG_SENSORS_LM85=m
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # LED devices
@@ -890,6 +941,7 @@ CONFIG_LEDS_CLASS=m
 # LED drivers
 #
 CONFIG_LEDS_S3C24XX=m
+CONFIG_LEDS_H1940=m
 
 #
 # LED Triggers
@@ -913,16 +965,22 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
@@ -944,7 +1002,6 @@ CONFIG_FONT_8x16=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -952,6 +1009,12 @@ CONFIG_FONT_8x16=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -964,7 +1027,6 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -974,7 +1036,8 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 
@@ -1015,6 +1078,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1028,6 +1092,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1051,6 +1116,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1060,6 +1126,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1096,6 +1163,7 @@ CONFIG_RTC_INTF_DEV=y
 #
 # RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
@@ -1103,7 +1171,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_S3C=y
@@ -1179,9 +1246,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1191,7 +1255,7 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -1285,6 +1349,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1296,28 +1365,30 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -1339,6 +1410,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1346,3 +1418,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1b935fb94b83..bb28087bf818 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f7598cbc7ec5..ae89cdd82b16 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -356,6 +356,7 @@
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
 		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_kexec_load)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index cec83783206e..627d79414c9d 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -75,6 +75,7 @@ static struct notifier_block crunch_notifier_block = {
 static int __init crunch_init(void)
 {
 	thread_register_notifier(&crunch_notifier_block);
+	elf_hwcap |= HWCAP_CRUNCH;
 
 	return 0;
 }
diff --git a/arch/arm/kernel/dma.c b/arch/arm/kernel/dma.c
index 5a0f4bc5da95..ba99a2035523 100644
--- a/arch/arm/kernel/dma.c
+++ b/arch/arm/kernel/dma.c
@@ -228,6 +228,7 @@ int dma_channel_active(dmach_t channel)
 {
 	return dma_chan[channel].active;
 }
+EXPORT_SYMBOL(dma_channel_active);
 
 void set_dma_page(dmach_t channel, char pagenr)
 {
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 71257e3d513f..f1c0fb974177 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -1009,7 +1009,7 @@ ecard_probe(int slot, card_type_t type)
 		ec->fiqmask = 4;
 	}
 
-	for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++)
+	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
 		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
 		    blacklist[i].product == ec->cid.product) {
 			ec->card_desc = blacklist[i].type;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 8517c3c3eb33..d645897652c2 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -27,6 +27,7 @@
  * Interrupt handling.  Preserves r7, r8, r9
  */
 	.macro	irq_handler
+	get_irqnr_preamble r5, lr
 1:	get_irqnr_and_base r0, r6, r5, lr
 	movne	r1, sp
 	@
@@ -99,7 +100,6 @@ common_invalid:
 					@ cpsr_<exception>, "old_r0"
 
 	mov	r0, sp
-	and	r2, r6, #0x1f
 	b	bad_mode
 
 /*
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 6f5e7c50d42f..c589dc3ecd1a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -9,6 +9,7 @@
  */
 
 #include <asm/unistd.h>
+#include <asm/arch/entry-macro.S>
 
 #include "entry-header.S"
 
@@ -25,6 +26,9 @@ ret_fast_syscall:
 	tst	r1, #_TIF_WORK_MASK
 	bne	fast_work_pending
 
+	/* perform architecture specific actions before user return */
+	arch_ret_to_user r1, lr
+
 	@ fast_restore_user_regs
 	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
@@ -61,6 +65,9 @@ ret_slow_syscall:
 	tst	r1, #_TIF_WORK_MASK
 	bne	work_pending
 no_work_pending:
+	/* perform architecture specific actions before user return */
+	arch_ret_to_user r1, lr
+
 	@ slow_restore_user_regs
 	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
 	ldr	lr, [sp, #S_PC]!		@ get pc
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index cf495a3084b3..66db0a9bf0bc 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -48,9 +48,11 @@
 	.endm
 
 #ifdef CONFIG_XIP_KERNEL
-#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#define KERNEL_START	XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#define KERNEL_END	_edata_loc
 #else
-#define TEXTADDR  KERNEL_RAM_VADDR
+#define KERNEL_START	KERNEL_RAM_VADDR
+#define KERNEL_END	_end
 #endif
 
 /*
@@ -240,16 +242,32 @@ __create_page_tables:
 	 * Now setup the pagetables for our kernel direct
 	 * mapped region.
 	 */
-	add	r0, r4,  #(TEXTADDR & 0xff000000) >> 18	@ start of kernel
-	str	r3, [r0, #(TEXTADDR & 0x00f00000) >> 18]!
-
-	ldr	r6, =(_end - PAGE_OFFSET - 1)	@ r6 = number of sections
-	mov	r6, r6, lsr #20			@ needed for kernel minus 1
+	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 18
+	str	r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
+	ldr	r6, =(KERNEL_END - 1)
+	add	r0, r0, #4
+	add	r6, r4, r6, lsr #18
+1:	cmp	r0, r6
+	add	r3, r3, #1 << 20
+	strls	r3, [r0], #4
+	bls	1b
 
-1:	add	r3, r3, #1 << 20
-	str	r3, [r0, #4]!
-	subs	r6, r6, #1
-	bgt	1b
+#ifdef CONFIG_XIP_KERNEL
+	/*
+	 * Map some ram to cover our .data and .bss areas.
+	 */
+	orr	r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
+	orr	r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
+	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> 18
+	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
+	ldr	r6, =(_end - 1)
+	add	r0, r0, #4
+	add	r6, r4, r6, lsr #18
+1:	cmp	r0, r6
+	add	r3, r3, #1 << 20
+	strls	r3, [r0], #4
+	bls	1b
+#endif
 
 	/*
 	 * Then map first 1MB of ram in case it contains our boot params.
@@ -259,22 +277,6 @@ __create_page_tables:
 	orr	r6, r6, #(PHYS_OFFSET & 0x00e00000)
 	str	r6, [r0]
 
-#ifdef CONFIG_XIP_KERNEL
-	/*
-	 * Map some ram to cover our .data and .bss areas.
-	 * Mapping 3MB should be plenty.
-	 */
-	sub	r3, r4, #PHYS_OFFSET
-	mov	r3, r3, lsr #20
-	add	r0, r0, r3, lsl #2
-	add	r6, r6, r3, lsl #20
-	str	r6, [r0], #4
-	add	r6, r6, #(1 << 20)
-	str	r6, [r0], #4
-	add	r6, r6, #(1 << 20)
-	str	r6, [r0]
-#endif
-
 #ifdef CONFIG_DEBUG_LL
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	/*
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
new file mode 100644
index 000000000000..863c66454f2b
--- /dev/null
+++ b/arch/arm/kernel/machine_kexec.c
@@ -0,0 +1,78 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+const extern unsigned char relocate_new_kernel[];
+const extern unsigned int relocate_new_kernel_size;
+
+extern void setup_mm_for_reboot(char mode);
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+extern unsigned long kexec_mach_type;
+
+/*
+ * Provide a dummy crash_notes definition while crash dump arrives to arm.
+ * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
+ */
+
+int machine_kexec_prepare(struct kimage *image)
+{
+	return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+void machine_shutdown(void)
+{
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
+void machine_kexec(struct kimage *image)
+{
+	unsigned long page_list;
+	unsigned long reboot_code_buffer_phys;
+	void *reboot_code_buffer;
+
+
+	page_list = image->head & PAGE_MASK;
+
+	/* we need both effective and real address here */
+	reboot_code_buffer_phys =
+	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
+	reboot_code_buffer = page_address(image->control_code_page);
+
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+	printk(KERN_INFO "Bye!\n");
+
+	cpu_proc_fin();
+	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+	cpu_reset(reboot_code_buffer_phys);
+}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index a9e8f7e55fd6..782af3cb213f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -36,7 +36,13 @@
 #include <asm/uaccess.h>
 #include <asm/mach/time.h>
 
-extern const char *processor_modes[];
+static const char *processor_modes[] = {
+  "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
+  "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+  "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
+  "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
+};
+
 extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
new file mode 100644
index 000000000000..7baadae7cb27
--- /dev/null
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -0,0 +1,74 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ */
+
+#include <asm/kexec.h>
+
+	.globl relocate_new_kernel
+relocate_new_kernel:
+
+	ldr	r0,kexec_indirection_page
+	ldr	r1,kexec_start_address
+
+
+0:	/* top, read another word for the indirection page */
+	ldr	r3, [r0],#4
+
+	/* Is it a destination page. Put destination address to r4 */
+	tst	r3,#1,0
+	beq	1f
+	bic	r4,r3,#1
+	b	0b
+1:
+	/* Is it an indirection page */
+	tst	r3,#2,0
+	beq	1f
+	bic	r0,r3,#2
+	b	0b
+1:
+
+	/* are we done ? */
+	tst	r3,#4,0
+	beq	1f
+	b	2f
+
+1:
+	/* is it source ? */
+	tst	r3,#8,0
+	beq	0b
+	bic r3,r3,#8
+	mov r6,#1024
+9:
+	ldr r5,[r3],#4
+	str r5,[r4],#4
+	subs r6,r6,#1
+	bne 9b
+	b 0b
+
+2:
+	/* Jump to relocated kernel */
+	mov lr,r1
+	mov r0,#0
+	ldr r1,kexec_mach_type
+	mov r2,#0
+	mov pc,lr
+
+	.globl kexec_start_address
+kexec_start_address:
+	.long	0x0
+
+	.globl kexec_indirection_page
+kexec_indirection_page:
+	.long	0x0
+
+	.globl kexec_mach_type
+kexec_mach_type:
+	.long	0x0
+
+relocate_new_kernel_end:
+
+	.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+	.long relocate_new_kernel_end - relocate_new_kernel
+
+
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index ed522151878b..0453dcc757b4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -88,6 +88,9 @@ struct cpu_user_fns cpu_user;
 #ifdef MULTI_CACHE
 struct cpu_cache_fns cpu_cache;
 #endif
+#ifdef CONFIG_OUTER_CACHE
+struct outer_cache_fns outer_cache;
+#endif
 
 struct stack {
 	u32 irq[3];
@@ -836,8 +839,11 @@ static int __init topology_init(void)
 {
 	int cpu;
 
-	for_each_possible_cpu(cpu)
-		register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu);
+	for_each_possible_cpu(cpu) {
+		struct cpuinfo_arm *cpuinfo = &per_cpu(cpu_data, cpu);
+		cpuinfo->cpu.hotpluggable = 1;
+		register_cpu(&cpuinfo->cpu, cpu);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index ee47c532e210..f61decb89ba2 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -40,12 +40,14 @@
  */
 struct sys_timer *system_timer;
 
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
 /* this needs a better home */
 DEFINE_SPINLOCK(rtc_lock);
 
-#ifdef CONFIG_SA1100_RTC_MODULE
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
 EXPORT_SYMBOL(rtc_lock);
 #endif
+#endif	/* pc-style 'CMOS' RTC support */
 
 /* change this if you have some constant time drift */
 #define USECS_PER_JIFFY	(1000000/HZ)
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 908915675edc..24095601359b 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -32,13 +32,6 @@
 #include "ptrace.h"
 #include "signal.h"
 
-const char *processor_modes[]=
-{ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
-  "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
-  "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
-  "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
-};
-
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
 #ifdef CONFIG_DEBUG_USER
@@ -289,7 +282,10 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 	regs->ARM_pc -= correction;
 
 	pc = (void __user *)instruction_pointer(regs);
-	if (thumb_mode(regs)) {
+
+	if (processor_mode(regs) == SVC_MODE) {
+		instr = *(u32 *) pc;
+	} else if (thumb_mode(regs)) {
 		get_user(instr, (u16 __user *)pc);
 	} else {
 		get_user(instr, (u32 __user *)pc);
@@ -337,12 +333,11 @@ asmlinkage void do_unexp_fiq (struct pt_regs *regs)
  * It never returns, and never tries to sync.  We hope that we can at least
  * dump out some state information...
  */
-asmlinkage void bad_mode(struct pt_regs *regs, int reason, int proc_mode)
+asmlinkage void bad_mode(struct pt_regs *regs, int reason)
 {
 	console_verbose();
 
-	printk(KERN_CRIT "Bad mode in %s handler detected: mode %s\n",
-		handler[reason], processor_modes[proc_mode]);
+	printk(KERN_CRIT "Bad mode in %s handler detected\n", handler[reason]);
 
 	die("Oops - bad mode", regs, 0);
 	local_irq_disable();
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index b929a60f7547..ddbdad48f5b2 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -156,6 +156,7 @@ SECTIONS
 
 		_edata = .;
 	}
+	_edata_loc = __data_loc + SIZEOF(.data);
 
 	.bss : {
 		__bss_start = .;	/* BSS				*/
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91/Kconfig
index 9f11db8af233..bf0d96272e3a 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,11 +9,14 @@ config ARCH_AT91RM9200
 	bool "AT91RM9200"
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260"
+	bool "AT91SAM9260 or AT91SAM9XE"
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+
 endchoice
 
 # ----------------------------------------------------------
@@ -90,13 +93,22 @@ endif
 
 if ARCH_AT91SAM9260
 
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
+
+config ARCH_AT91SAM9260_SAM9XE
+	bool "AT91SAM9XE"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+	  They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	depends on ARCH_AT91SAM9260
 	help
-	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 endif
@@ -118,17 +130,32 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91/Makefile
index cf777007847a..05de6cdc88f1 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -31,6 +32,9 @@ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
diff --git a/arch/arm/mach-at91rm9200/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc7cd34..e667dcc7cd34 100644
--- a/arch/arm/mach-at91rm9200/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index a92e9a495b07..2ddcdd69df7d 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91rm9200.c
+ * arch/arm/mach-at91/at91rm9200.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -117,6 +117,36 @@ static struct clk pioD_clk = {
 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -132,7 +162,12 @@ static struct clk *periph_clocks[] __initdata = {
 	&twi_clk,
 	&spi_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc5
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	&ohci_clk,
 	&ether_clk,
 	// irq0 .. irq6
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 57fac7203fe4..2624a4f22d61 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
+ * arch/arm/mach-at91/at91rm9200_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -315,7 +315,7 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -361,7 +361,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -594,6 +594,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index b999e192a7e9..949199a244c7 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL
diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index b14871adc300..6ea41d8266cb 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9260.c
+ * arch/arm/mach-at91/at91sam9260.c
  *
  *  Copyright (C) 2006 SAN People
  *
@@ -14,6 +14,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
@@ -27,7 +28,11 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	}
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
 		.length		= AT91SAM9260_SRAM0_SIZE,
@@ -37,7 +42,14 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
 		.length		= AT91SAM9260_SRAM1_SIZE,
 		.type		= MT_DEVICE,
-	},
+	}
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+		.type		= MT_DEVICE,
+	}
 };
 
 /* --------------------------------------------------------------------
@@ -107,13 +119,28 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk ether_clk = {
-	.name		= "ether_clk",
+static struct clk macb_clk = {
+	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -137,6 +164,21 @@ static struct clk usart5_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -152,14 +194,18 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
-	&ether_clk,
+	&macb_clk,
 	&isi_clk,
 	&usart3_clk,
 	&usart4_clk,
 	&usart5_clk,
-	// tc3 .. tc5
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	// irq0 .. irq2
 };
 
@@ -213,7 +259,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
 
 static void at91sam9260_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
@@ -221,11 +267,37 @@ static void at91sam9260_reset(void)
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
+static void __init at91sam9xe_initialize(void)
+{
+	unsigned long cidr, sram_size;
+
+	cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+	switch (cidr & AT91_CIDR_SRAMSIZ) {
+		case AT91_CIDR_SRAMSIZ_32K:
+			sram_size = 2 * SZ_16K;
+			break;
+		case AT91_CIDR_SRAMSIZ_16K:
+		default:
+			sram_size = SZ_16K;
+	}
+
+	at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+	at91sam9xe_sram_desc->length = sram_size;
+
+	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
 void __init at91sam9260_initialize(unsigned long main_clock)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
 
+	if (cpu_is_at91sam9xe())
+		at91sam9xe_initialize();
+	else
+		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
 	at91_arch_reset = at91sam9260_reset;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index f42d3a40ec3c..40586e22cd38 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ * arch/arm/mach-at91/at91sam9260_devices.c
  *
  *  Copyright (C) 2006 Atmel
  *
@@ -128,7 +128,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct platform_device at91sam9260_eth_device = {
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_eth(struct eth_platform_data *data)
 	platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #endif
 
 
@@ -229,7 +229,7 @@ static struct platform_device at91sam9260_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -275,7 +275,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9260_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -320,16 +320,16 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
 			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
 
-	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 
-	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 
 	if (data->bus_width_16)
 		mode = AT91_SMC_DBW_16;
 	else
 		mode = AT91_SMC_DBW_8;
-	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 
 	/* enable pin */
 	if (data->enable_pin)
@@ -515,6 +515,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index d242bb885c6d..784d1e682d6d 100644
--- a/arch/arm/mach-at91rm9200/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9261.c
+ * arch/arm/mach-at91/at91sam9261.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -97,6 +97,21 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
@@ -121,7 +136,9 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
 	&lcdc_clk,
 	// irq0 .. irq2
@@ -208,7 +225,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
 
 static void at91sam9261_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ed1d79081b35..e1504766fd64 100644
--- a/arch/arm/mach-at91rm9200/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ * arch/arm/mach-at91/at91sam9261_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -159,7 +159,7 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9261_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -513,6 +513,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
new file mode 100644
index 000000000000..0e89a7fca3fa
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -0,0 +1,313 @@
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+		.length		= AT91SAM9263_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+		.length		= AT91SAM9263_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+	.name		= "pioCDE_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioCDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	// can
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc0 .. ssc1
+	// ac97
+	&tcb_clk,
+	// pwmc
+	&macb_clk,
+	// 2dge
+	&udc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	// dma
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+	{
+		.id		= AT91SAM9263_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOC,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioCDE_clk,
+	}
+};
+
+static void at91sam9263_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+	at91_arch_reset = at91sam9263_reset;
+	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9263_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C, D and E */
+	0,
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	4,	/* CAN */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	6,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,
+	0,	/* 2D Graphic Engine */
+	3,	/* USB Device Port */
+	0,	/* Image Sensor Interface */
+	3,	/* LDC Controller */
+	0,	/* DMA Controller */
+	0,
+	3,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9263_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
new file mode 100644
index 000000000000..b77121f27f34
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -0,0 +1,818 @@
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512	0x00000200
+#define SZ_256	0x00000100
+#define SZ_16	0x00000010
+
+/* --------------------------------------------------------------------
+ *  USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_UHP_BASE,
+		.end	= AT91SAM9263_UHP_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UHP,
+		.end	= AT91SAM9263_ID_UHP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &usbh_data,
+	},
+	.resource	= usbh_resources,
+	.num_resources	= ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_data = *data;
+	platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_UDP,
+		.end	= AT91SAM9263_BASE_UDP + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_UDP,
+		.end	= AT91SAM9263_ID_UDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_udc_device = {
+	.name		= "at91_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data		= &udc_data,
+	},
+	.resource	= udc_resources,
+	.num_resources	= ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->vbus_pin) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	udc_data = *data;
+	platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_EMAC,
+		.end	= AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_EMAC,
+		.end	= AT91SAM9263_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI0,
+		.end	= AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI0,
+		.end	= AT91SAM9263_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+	.name		= "at91_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_MCI1,
+		.end	= AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_MCI1,
+		.end	= AT91SAM9263_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+	.name		= "at91_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+	if (!data)
+		return;
+
+	/* input/irq */
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+	if (data->wp_pin)
+		at91_set_gpio_input(data->wp_pin, 1);
+	if (data->vcc_pin)
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	if (mmc_id == 0) {		/* MCI0 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA12, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA16, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA17, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA18, 1);
+				at91_set_A_periph(AT91_PIN_PA19, 1);
+				at91_set_A_periph(AT91_PIN_PA20, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA1, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA0, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA3, 1);
+				at91_set_A_periph(AT91_PIN_PA4, 1);
+				at91_set_A_periph(AT91_PIN_PA5, 1);
+			}
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc0_device);
+	} else {			/* MCI1 */
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA6, 0);
+
+		if (data->slot_b) {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA21, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA22, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA23, 1);
+				at91_set_A_periph(AT91_PIN_PA24, 1);
+				at91_set_A_periph(AT91_PIN_PA25, 1);
+			}
+		} else {
+			/* CMD */
+			at91_set_A_periph(AT91_PIN_PA7, 1);
+
+			/* DAT0, maybe DAT1..DAT3 */
+			at91_set_A_periph(AT91_PIN_PA8, 1);
+			if (data->wire4) {
+				at91_set_A_periph(AT91_PIN_PA9, 1);
+				at91_set_A_periph(AT91_PIN_PA10, 1);
+				at91_set_A_periph(AT91_PIN_PA11, 1);
+			}
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9263_mmc1_device);
+	}
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	{
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9263_nand_device = {
+	.name		= "at91_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+	unsigned long csa, mode;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+	/* set the bus interface characteristics */
+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+			| AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+	if (data->bus_width_16)
+		mode = AT91_SMC_DBW_16;
+	else
+		mode = AT91_SMC_DBW_8;
+	at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TWI,
+		.end	= AT91SAM9263_BASE_TWI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TWI,
+		.end	= AT91SAM9263_ID_TWI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_twi_device = {
+	.name		= "at91_i2c",
+	.id		= -1,
+	.resource	= twi_resources,
+	.num_resources	= ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+	/* pins used for TWI interface */
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* TWD */
+	at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* TWCK */
+	at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+	platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI0,
+		.end	= AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI0,
+		.end	= AT91SAM9263_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_SPI1,
+		.end	= AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_SPI1,
+		.end	= AT91SAM9263_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= 0xffffffff,
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9263_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
+	at91_leds_cpu	= cpu_led;
+	at91_leds_timer	= timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &dbgu_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US0,
+		.end	= AT91SAM9263_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US0,
+		.end	= AT91SAM9263_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &uart0_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
+	at91_set_A_periph(AT91_PIN_PA28, 0);		/* RTS0 */
+	at91_set_A_periph(AT91_PIN_PA29, 0);		/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US1,
+		.end	= AT91SAM9263_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US1,
+		.end	= AT91SAM9263_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.platform_data	= &uart1_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_set_B_periph(AT91_PIN_PD7, 0);		/* RTS1 */
+	at91_set_B_periph(AT91_PIN_PD8, 0);		/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_US2,
+		.end	= AT91SAM9263_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_US2,
+		.end	= AT91SAM9263_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.platform_data	= &uart2_data,
+				.coherent_dma_mask = 0xffffffff,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_set_B_periph(AT91_PIN_PD5, 0);		/* RTS2 */
+	at91_set_B_periph(AT91_PIN_PD6, 0);		/* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+	int i;
+
+	/* Fill in list of supported UARTs */
+	for (i = 0; i < config->nr_tty; i++) {
+		switch (config->tty_map[i]) {
+			case 0:
+				configure_usart0_pins();
+				at91_uarts[i] = &at91sam9263_uart0_device;
+				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+				break;
+			case 1:
+				configure_usart1_pins();
+				at91_uarts[i] = &at91sam9263_uart1_device;
+				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+				break;
+			case 2:
+				configure_usart2_pins();
+				at91_uarts[i] = &at91sam9263_uart2_device;
+				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+				break;
+			case 3:
+				configure_dbgu_pins();
+				at91_uarts[i] = &at91sam9263_dbgu_device;
+				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+				break;
+			default:
+				continue;
+		}
+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
+	}
+
+	/* Set serial console device */
+	if (config->console_tty < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[config->console_tty];
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 99df5f6ee42e..a4dded27fa16 100644
--- a/arch/arm/mach-at91rm9200/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
  *
  * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
  * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
@@ -30,7 +30,6 @@
  * Returns number of microseconds since last timer interrupt.  Note that interrupts
  * will have been disabled by do_gettimeofday()
  *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
  */
 static unsigned long at91sam926x_gettimeoffset(void)
 {
@@ -39,7 +38,7 @@ static unsigned long at91sam926x_gettimeoffset(void)
 
 	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
 
-	return (unsigned long)(elapsed * 1000000) / LATCH;
+	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
 }
 
 /*
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 971c3e2d8e36..2d3d4b6f7b02 100644
--- a/arch/arm/mach-at91rm9200/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
+ * linux/arch/arm/mach-at91/board-1arm.c
  *
  *  Copyright (C) 2005 SAN People
  *
diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 654f0379550a..b4518619063a 100644
--- a/arch/arm/mach-at91rm9200/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
+ * linux/arch/arm/mach-at91/board-carmeva.c
  *
  *  Copyright (c) 2005 Peer Georgi
  *  		       Conitec Datasystems
@@ -134,7 +134,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(&carmeva_mmc_data);
+	at91_add_device_mmc(0, &carmeva_mmc_data);
 }
 
 MACHINE_START(CARMEVA, "Carmeva")
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index b8bb8052607a..e18a41e61f0c 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ * linux/arch/arm/mach-at91/board-csb337.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -112,6 +113,42 @@ static struct spi_board_info csb337_spi_devices[] = {
 	},
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb337_board_init(void)
 {
 	/* Serial */
@@ -130,7 +167,9 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
+	at91_add_device_mmc(0, &csb337_mmc_data);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index a29fa0e822ce..77f04b935b3a 100644
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ * linux/arch/arm/mach-at91/board-csb637.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -23,6 +23,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -81,6 +82,42 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 	.pullup_pin   = AT91_PIN_PB1,
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb637_board_init(void)
 {
 	/* Serial */
@@ -95,6 +132,8 @@ static void __init csb637_board_init(void)
 	at91_add_device_i2c();
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 7522bf91bce8..6043c38c0a9e 100644
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
+ * linux/arch/arm/mach-at91/board-dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -194,7 +194,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&dk_mmc_data);
+	at91_add_device_mmc(0, &dk_mmc_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 80b72cf7264c..20458b5548f0 100644
--- a/arch/arm/mach-at91rm9200/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
+ * linux/arch/arm/mach-at91/board-eb9200.c
  *
  *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
  *  by Andrew Patrikalakis
@@ -109,7 +109,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(&eb9200_mmc_data);
+	at91_add_device_mmc(0, &eb9200_mmc_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91/board-ek.c
index c4fdb415f20e..322fdd75a1e4 100644
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-ek.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -154,7 +154,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 6ef3c4879829..c77d84ce9cae 100644
--- a/arch/arm/mach-at91rm9200/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
+ * linux/arch/arm/mach-at91/board-kafa.c
  *
  *  Copyright (C) 2006 Sperry-Sun
  *
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 759d8191854f..76f6e1e553ea 100644
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
+ * linux/arch/arm/mach-at91/board-kb9202.c
  *
  *  Copyright (c) 2005 kb_admin
  *  		       KwikByte, Inc.
@@ -122,7 +122,7 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
+	at91_add_device_mmc(0, &kb9202_mmc_data);
 	/* I2C */
 	at91_add_device_i2c();
 	/* SPI */
diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index da5d58ac870b..57fb4499d969 100644
--- a/arch/arm/mach-at91rm9200/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9260ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
@@ -187,7 +187,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91rm9200/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 30b490d8886b..b7e772467cf6 100644
--- a/arch/arm/mach-at91rm9200/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9261ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -243,7 +243,7 @@ static void __init ek_board_init(void)
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #else
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 }
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
new file mode 100644
index 000000000000..8fdce11a880c
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -0,0 +1,176 @@
+/*
+ * linux/arch/arm/mach-at91/board-sam9263ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 16.367 MHz crystal */
+	at91sam9263_initialize(16367660);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PA25,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PE18,
+	.wp_pin		= AT91_PIN_PE19,
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 64 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(1, &ek_mmc_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+}
+
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91/clock.c
index 36a8e4d1cc6d..06c9a0507d0d 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/clock.c
+ * linux/arch/arm/mach-at91/clock.c
  *
  * Copyright (C) 2005 David Brownell
  * Copyright (C) 2005 Ivan Kokshaysky
@@ -525,27 +525,6 @@ fail:
 	return 0;
 }
 
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
-	unsigned long reg;
-	struct clk *clk;
-
-	reg = at91_sys_read(AT91_PMC_PCSR);
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->mode != pmc_periph_mode)
-			continue;
-
-		if (clk->users > 0)
-			reg &= ~clk->pmc_mask;
-	}
-
-	at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
 static struct clk *const standard_pmc_clocks[] __initdata = {
 	/* four primary clocks */
 	&clk32k,
@@ -586,7 +565,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	/*
-	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
+	 * USB clock init:  choose 48 MHz PLLB value,
 	 * disable 48MHz clock during usb peripheral suspend.
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
@@ -596,16 +575,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-	} else if (cpu_is_at91sam9261()) {
-		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
@@ -634,11 +607,34 @@ int __init at91_clock_init(unsigned long main_clock)
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-	/* disable all programmable clocks */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+	return 0;
+}
+
+/*
+ * Several unused clocks may be active.  Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+	unsigned long pcdr = 0;
+	unsigned long scdr = 0;
+	struct clk *clk;
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->users > 0)
+			continue;
+
+		if (clk->mode == pmc_periph_mode)
+			pcdr |= clk->pmc_mask;
+
+		if (clk->mode == pmc_sys_mode)
+			scdr |= clk->pmc_mask;
+
+		pr_debug("Clocks: disable unused %s\n", clk->name);
+	}
 
-	/* disable all other unused peripheral clocks */
-	at91_periphclk_reset();
+	at91_sys_write(AT91_PMC_PCDR, pcdr);
+	at91_sys_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
+late_initcall(at91_clock_reset);
diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91/clock.h
index b5c7a2eb2d1d..1ba3b95ff359 100644
--- a/arch/arm/mach-at91rm9200/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/clock.h
+ * linux/arch/arm/mach-at91/clock.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91/generic.h
index 8c4d5a77d485..bda26221c522 100644
--- a/arch/arm/mach-at91rm9200/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/generic.h
+ * linux/arch/arm/mach-at91/generic.h
  *
  *  Copyright (C) 2005 David Brownell
  *
@@ -12,11 +12,13 @@
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91/gpio.c
index 15eb5b6b29f2..ba4a1bb3ee40 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/gpio.c
+ * linux/arch/arm/mach-at91/gpio.c
  *
  * Copyright (C) 2005 HP Labs
  *
@@ -210,18 +210,19 @@ int gpio_direction_input(unsigned pin)
 
 	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
 		return -EINVAL;
-	__raw_writel(mask, pio + PIO_OER);
+	__raw_writel(mask, pio + PIO_ODR);
 	return 0;
 }
 EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned pin)
+int gpio_direction_output(unsigned pin, int value)
 {
 	void __iomem	*pio = pin_to_controller(pin);
 	unsigned	mask = pin_to_mask(pin);
 
 	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
 		return -EINVAL;
+	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
 	__raw_writel(mask, pio + PIO_OER);
 	return 0;
 }
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91/irq.c
index 2148daafd29c..78a5cdb746dc 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/irq.c
+ * linux/arch/arm/mach-at91/irq.c
  *
  *  Copyright (C) 2004 SAN People
  *  Copyright (C) 2004 ATMEL
diff --git a/arch/arm/mach-at91rm9200/leds.c b/arch/arm/mach-at91/leds.c
index 1a333730466e..0d5144973988 100644
--- a/arch/arm/mach-at91rm9200/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -86,10 +86,6 @@ static int __init leds_init(void)
 	if (!at91_leds_timer || !at91_leds_cpu)
 		return -ENODEV;
 
-	/* Enable PIO to access the LEDs */
-	at91_set_gpio_output(at91_leds_timer, 1);
-	at91_set_gpio_output(at91_leds_cpu, 1);
-
 	leds_event = at91_leds_event;
 
 	leds_event(led_start);
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91/pm.c
index 67aa5572a3ea..ff8db29e989e 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/pm.c
+ * arch/arm/mach-at91/pm.c
  * AT91 Power Management
  *
  * Copyright (C) 2005 David Brownell
@@ -80,6 +80,8 @@ static int at91_pm_verify_clocks(void)
 #warning "Check SAM9260 USB clocks"
 	} else if (cpu_is_at91sam9261()) {
 #warning "Check SAM9261 USB clocks"
+	} else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -199,7 +201,6 @@ error:
 
 
 static struct pm_ops at91_pm_ops ={
-	.pm_disk_mode	= 0,
 	.valid		= at91_pm_valid_state,
 	.prepare	= at91_pm_prepare,
 	.enter		= at91_pm_enter,
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index af7904b3d0a8..575a21dabd2f 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -51,6 +51,31 @@ config MACH_GESBC9312
 	  Say 'Y' here if you want your kernel to support the Glomation
 	  GESBC-9312-sx board.
 
+config MACH_MICRO9
+        bool
+        default n
+
+config MACH_MICRO9H
+       bool "Support Contec Hypercontrol Micro9-H"
+       select MACH_MICRO9
+       help
+         Say 'Y' here if you want your kernel to support the
+         Contec Hypercontrol Micro9-H board.
+
+config MACH_MICRO9M
+       bool "Support Contec Hypercontrol Micro9-M"
+       select MACH_MICRO9
+       help
+         Say 'Y' here if you want your kernel to support the
+         Contec Hypercontrol Micro9-M board.
+
+config MACH_MICRO9L
+       bool "Support Contec Hypercontrol Micro9-L"
+       select MACH_MICRO9
+       help
+         Say 'Y' here if you want your kernel to support the
+         Contec Hypercontrol Micro9-L board.
+
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index b06641dd450d..0d3bf932654e 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -13,4 +13,5 @@ obj-$(CONFIG_MACH_EDB9312)	+= edb9312.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
 obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
+obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 08ad782c1649..f174d1a3b11c 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
 #include <asm/hardware.h>
@@ -124,7 +125,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	return (unsigned long)rate;
 }
 
-void ep93xx_clock_init(void)
+static int __init ep93xx_clock_init(void)
 {
 	u32 value;
 
@@ -153,4 +154,7 @@ void ep93xx_clock_init(void)
 	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
+
+	return 0;
 }
+arch_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6b26346191c0..829aed696d98 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -152,22 +152,30 @@ struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * GPIO handling for EP93xx
  *************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
 
-static void update_gpio_ab_int_params(int port)
+static void update_gpio_int_params(int abf)
 {
-	if (port == 0) {
+	if (abf == 0) {
 		__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
-	} else if (port == 1) {
+		__raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
+	} else if (abf == 1) {
 		__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+		__raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
+	} else if (abf == 2) {
+		__raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
+		__raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
+		__raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
+		__raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
+	} else {
+		BUG();
 	}
 }
 
@@ -192,8 +200,13 @@ void gpio_line_config(int line, int direction)
 	local_irq_save(flags);
 	if (direction == GPIO_OUT) {
 		if (line >= 0 && line < 16) {
-			gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
-			update_gpio_ab_int_params(line >> 3);
+			/* Port A/B.  */
+			gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+			update_gpio_int_params(line >> 3);
+		} else if (line >= 40 && line < 48) {
+			/* Port F.  */
+			gpio_int_unmasked[2] &= ~(1 << (line & 7));
+			update_gpio_int_params(2);
 		}
 
 		v = __raw_readb(data_direction_register);
@@ -244,8 +257,7 @@ EXPORT_SYMBOL(gpio_line_set);
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
-		struct irq_desc *desc)
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned char status;
 	int i;
@@ -267,37 +279,46 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+
+	desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	update_gpio_int_params(port);
 
-	if (line >> 3) {
-		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
-	} else {
+	if (port == 0) {
 		__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+	} else if (port == 1) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+	} else if (port == 2) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+static void ep93xx_gpio_irq_mask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	update_gpio_int_params(port);
 }
 
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] |= 1 << (line & 7);
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] |= 1 << (line & 7);
+	update_gpio_int_params(port);
 }
 
 
@@ -306,40 +327,51 @@ static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
  * edge (1) triggered, while gpio_int_type2 controls whether it
  * triggers on low/falling (0) or high/rising (1).
  */
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int port;
 	int line;
 
 	line = irq - IRQ_EP93XX_GPIO(0);
-	gpio_line_config(line, GPIO_IN);
+	if (line >= 0 && line < 16) {
+		gpio_line_config(line, GPIO_IN);
+	} else {
+		gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
+	}
 
 	port = line >> 3;
 	line &= 7;
 
 	if (type & IRQT_RISING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_FALLING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] &= ~(1 << line);
 	} else if (type & IRQT_HIGH) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_LOW) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] &= ~(1 << line);
+	} else {
+		gpio_int_enabled[port] &= ~(1 << line);
 	}
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 
 	return 0;
 }
 
-static struct irq_chip ep93xx_gpio_ab_irq_chip = {
-	.ack		= ep93xx_gpio_ab_irq_mask_ack,
-	.mask		= ep93xx_gpio_ab_irq_mask,
-	.unmask		= ep93xx_gpio_ab_irq_unmask,
-	.set_type	= ep93xx_gpio_ab_irq_type,
+static struct irq_chip ep93xx_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= ep93xx_gpio_irq_mask_ack,
+	.mask		= ep93xx_gpio_irq_mask,
+	.unmask		= ep93xx_gpio_irq_unmask,
+	.set_type	= ep93xx_gpio_irq_type,
 };
 
 
@@ -350,12 +382,21 @@ void __init ep93xx_init_irq(void)
 	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
 	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
 
-	for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
-		set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+	for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
+		set_irq_chip(irq, &ep93xx_gpio_irq_chip);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
+
 	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
 }
 
 
@@ -461,8 +502,6 @@ void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
 
-	ep93xx_clock_init();
-
 	/*
 	 * Disallow access to MaverickCrunch initially.
 	 */
@@ -477,8 +516,4 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
-
-#ifdef CONFIG_CRUNCH
-	elf_hwcap |= HWCAP_CRUNCH;
-#endif
 }
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
new file mode 100644
index 000000000000..f28c1294cae1
--- /dev/null
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -0,0 +1,157 @@
+/*
+ *  linux/arch/arm/mach-ep93xx/micro9.c
+ *
+ * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
+ *                   Manfred Gruber <manfred.gruber@contec.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <linux/mtd/physmap.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+static struct ep93xx_eth_data micro9_eth_data = {
+       .phy_id                 = 0x1f,
+};
+
+static struct resource micro9_eth_resource[] = {
+       {
+               .start  = EP93XX_ETHERNET_PHYS_BASE,
+               .end    = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = IRQ_EP93XX_ETHERNET,
+               .end    = IRQ_EP93XX_ETHERNET,
+               .flags  = IORESOURCE_IRQ,
+       }
+};
+
+static struct platform_device micro9_eth_device = {
+       .name           = "ep93xx-eth",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &micro9_eth_data,
+       },
+       .num_resources = ARRAY_SIZE(micro9_eth_resource),
+       .resource       = micro9_eth_resource,
+};
+
+static void __init micro9_eth_init(void)
+{
+       memcpy(micro9_eth_data.dev_addr,
+               (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+       platform_device_register(&micro9_eth_device);
+}
+
+static void __init micro9_init(void)
+{
+       micro9_eth_init();
+}
+
+/*
+ * Micro9-H
+ */
+#ifdef CONFIG_MACH_MICRO9H
+static struct physmap_flash_data micro9h_flash_data = {
+       .width          = 4,
+};
+
+static struct resource micro9h_flash_resource = {
+       .start          = 0x10000000,
+       .end            = 0x13ffffff,
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device micro9h_flash = {
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &micro9h_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &micro9h_flash_resource,
+};
+
+static void __init micro9h_init(void)
+{
+       platform_device_register(&micro9h_flash);
+}
+
+static void __init micro9h_init_machine(void)
+{
+       ep93xx_init_devices();
+       micro9_init();
+       micro9h_init();
+}
+
+MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9h_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-M
+ */
+#ifdef CONFIG_MACH_MICRO9M
+static void __init micro9m_init_machine(void)
+{
+       ep93xx_init_devices();
+       micro9_init();
+}
+
+MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9m_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-L
+ */
+#ifdef CONFIG_MACH_MICRO9L
+static void __init micro9l_init_machine(void)
+{
+       ep93xx_init_devices();
+       micro9_init();
+}
+
+MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9l_init_machine,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index 4f66e90db74f..7e70e0b0b989 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -50,6 +50,7 @@
 #define CR_920T_ASYNC_MODE	0xC0000000
 
 static u32 mpctl0_at_boot;
+static u32 bclk_div_at_boot;
 
 static void imx_set_async_mode(void)
 {
@@ -82,13 +83,13 @@ static void imx_set_mpctl0(u32 mpctl0)
  * imx_compute_mpctl - compute new PLL parameters
  * @new_mpctl:	pointer to location assigned by new PLL control register value
  * @cur_mpctl:	current PLL control register parameters
+ * @f_ref:	reference source frequency Hz
  * @freq:	required frequency in Hz
  * @relation:	is one of %CPUFREQ_RELATION_L (supremum)
  *		and %CPUFREQ_RELATION_H (infimum)
  */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, unsigned long freq, int relation)
+long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
 {
-        u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
         u32 mfi;
         u32 mfn;
         u32 mfd;
@@ -182,7 +183,7 @@ static int imx_set_target(struct cpufreq_policy *policy,
 	unsigned long flags;
 	long freq;
 	long sysclk;
-	unsigned int bclk_div = 1;
+	unsigned int bclk_div = bclk_div_at_boot;
 
 	/*
 	 * Some governors do not respects CPU and policy lower limits
@@ -202,8 +203,8 @@ static int imx_set_target(struct cpufreq_policy *policy,
 
 	sysclk = imx_get_system_clk();
 
-	if (freq > sysclk + 1000000) {
-		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, freq, relation);
+	if (freq > sysclk / bclk_div_at_boot + 1000000) {
+		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
 		if (freq < 0) {
 			printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
 			return -EINVAL;
@@ -217,6 +218,8 @@ static int imx_set_target(struct cpufreq_policy *policy,
 
 			if(bclk_div > 16)
 				bclk_div = 16;
+			if(bclk_div < bclk_div_at_boot)
+				bclk_div = bclk_div_at_boot;
 		}
 		freq = (sysclk + bclk_div / 2) / bclk_div;
 	}
@@ -285,7 +288,7 @@ static struct cpufreq_driver imx_driver = {
 
 static int __init imx_cpufreq_init(void)
 {
-
+	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
 	mpctl0_at_boot = 0;
 
 	if((CSCR & CSCR_MPEN) &&
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index b5aa49d00ca3..7a7fa51ec62c 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -102,7 +102,7 @@ EXPORT_SYMBOL(imx_gpio_mode);
  *  f = 2 * f_ref * --------------------
  *                        pd + 1
  */
-static unsigned int imx_decode_pll(unsigned int pll)
+static unsigned int imx_decode_pll(unsigned int pll, u32 f_ref)
 {
 	unsigned long long ll;
 	unsigned long quot;
@@ -111,7 +111,6 @@ static unsigned int imx_decode_pll(unsigned int pll)
 	u32 mfn = pll & 0x3ff;
 	u32 mfd = (pll >> 16) & 0x3ff;
 	u32 pd =  (pll >> 26) & 0xf;
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
 
 	mfi = mfi <= 5 ? 5 : mfi;
 
@@ -124,13 +123,15 @@ static unsigned int imx_decode_pll(unsigned int pll)
 
 unsigned int imx_get_system_clk(void)
 {
-	return imx_decode_pll(SPCTL0);
+	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
+
+	return imx_decode_pll(SPCTL0, f_ref);
 }
 EXPORT_SYMBOL(imx_get_system_clk);
 
 unsigned int imx_get_mcu_clk(void)
 {
-	return imx_decode_pll(MPCTL0);
+	return imx_decode_pll(MPCTL0, CLK32 * 512);
 }
 EXPORT_SYMBOL(imx_get_mcu_clk);
 
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
index c3d6c08f2d4c..4185e0586c33 100644
--- a/arch/arm/mach-iop13xx/Makefile
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -5,7 +5,6 @@ obj-			:=
 
 obj-$(CONFIG_ARCH_IOP13XX) += setup.o
 obj-$(CONFIG_ARCH_IOP13XX) += irq.o
-obj-$(CONFIG_ARCH_IOP13XX) += time.o
 obj-$(CONFIG_ARCH_IOP13XX) += pci.o
 obj-$(CONFIG_ARCH_IOP13XX) += io.o
 obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 2a1bbfe9896f..a519d707571c 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -25,6 +25,7 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/pci.h>
 #include <asm/mach/time.h>
+#include <asm/arch/time.h>
 
 extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
 
@@ -78,12 +79,12 @@ static void __init iq81340mc_init(void)
 
 static void __init iq81340mc_timer_init(void)
 {
-	iop13xx_init_time(400000000);
+	iop_init_time(400000000);
 }
 
 static struct sys_timer iq81340mc_timer = {
        .init       = iq81340mc_timer_init,
-       .offset     = iop13xx_gettimeoffset,
+       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 5ad2b62c9bfd..0e71fbcabe00 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -25,6 +25,7 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/pci.h>
 #include <asm/mach/time.h>
+#include <asm/arch/time.h>
 
 extern int init_atu;
 
@@ -80,12 +81,12 @@ static void __init iq81340sc_init(void)
 
 static void __init iq81340sc_timer_init(void)
 {
-	iop13xx_init_time(400000000);
+	iop_init_time(400000000);
 }
 
 static struct sys_timer iq81340sc_timer = {
        .init       = iq81340sc_timer_init,
-       .offset     = iop13xx_gettimeoffset,
+       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index dbbc07c38b14..b2eb0b961031 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -161,65 +161,49 @@ static void write_intsize(u32 val)
 static void
 iop13xx_irq_mask0 (unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_0(read_intctl_0() & ~(1 << (irq - 0)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_mask1 (unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_1(read_intctl_1() & ~(1 << (irq - 32)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_mask2 (unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_2(read_intctl_2() & ~(1 << (irq - 64)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_mask3 (unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_3(read_intctl_3() & ~(1 << (irq - 96)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_unmask0(unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_0(read_intctl_0() | (1 << (irq - 0)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_unmask1(unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_1(read_intctl_1() | (1 << (irq - 32)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_unmask2(unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_2(read_intctl_2() | (1 << (irq - 64)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static void
 iop13xx_irq_unmask3(unsigned int irq)
 {
-	u32 cp_flags = iop13xx_cp6_save();
 	write_intctl_3(read_intctl_3() | (1 << (irq - 96)));
-	iop13xx_cp6_restore(cp_flags);
 }
 
 static struct irq_chip iop13xx_irqchip1 = {
@@ -250,11 +234,13 @@ static struct irq_chip iop13xx_irqchip4 = {
 	.unmask = iop13xx_irq_unmask3,
 };
 
+extern void iop_init_cp6_handler(void);
+
 void __init iop13xx_init_irq(void)
 {
 	unsigned int i;
 
-	u32 cp_flags = iop13xx_cp6_save();
+	iop_init_cp6_handler();
 
 	/* disable all interrupts */
 	write_intctl_0(0);
@@ -285,6 +271,4 @@ void __init iop13xx_init_irq(void)
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
-
-	iop13xx_cp6_restore(cp_flags);
 }
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 5fbeb28d04bb..9a46bcd5f18e 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -24,6 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 
 #define IOP13XX_UART_XTAL 33334000
 #define IOP13XX_SETUP_DEBUG 0
diff --git a/arch/arm/mach-iop13xx/time.c b/arch/arm/mach-iop13xx/time.c
deleted file mode 100644
index 8b21365f653f..000000000000
--- a/arch/arm/mach-iop13xx/time.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/time.c
- *
- * Timer code for IOP13xx (copied from IOP32x/IOP33x implementation)
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-static unsigned long ticks_per_jiffy;
-static unsigned long ticks_per_usec;
-static unsigned long next_jiffy_time;
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
-	return val;
-}
-
-unsigned long iop13xx_gettimeoffset(void)
-{
-	unsigned long offset;
-	u32 cp_flags;
-
-	cp_flags = iop13xx_cp6_save();
-	offset = next_jiffy_time - read_tcr1();
-	iop13xx_cp6_restore(cp_flags);
-
-	return offset / ticks_per_usec;
-}
-
-static irqreturn_t
-iop13xx_timer_interrupt(int irq, void *dev_id)
-{
-	u32 cp_flags = iop13xx_cp6_save();
-
-	write_seqlock(&xtime_lock);
-
-	asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (1));
-
-	while ((signed long)(next_jiffy_time - read_tcr1())
-							>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
-
-	write_sequnlock(&xtime_lock);
-
-	iop13xx_cp6_restore(cp_flags);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction iop13xx_timer_irq = {
-	.name		= "IOP13XX Timer Tick",
-	.handler	= iop13xx_timer_interrupt,
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-};
-
-void __init iop13xx_init_time(unsigned long tick_rate)
-{
-	u32 timer_ctl;
-	u32 cp_flags;
-
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
-	ticks_per_usec = tick_rate / 1000000;
-	next_jiffy_time = 0xffffffff;
-
-	timer_ctl = IOP13XX_TMR_EN | IOP13XX_TMR_PRIVILEGED |
-			IOP13XX_TMR_RELOAD | IOP13XX_TMR_RATIO_1_1;
-
-	/*
-	 * We use timer 0 for our timer interrupt, and timer 1 as
-	 * monotonic counter for tracking missed jiffies.
-	 */
-	cp_flags = iop13xx_cp6_save();
-	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (ticks_per_jiffy - 1));
-	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (timer_ctl));
-	asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (0xffffffff));
-	asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (timer_ctl));
-	iop13xx_cp6_restore(cp_flags);
-
-	setup_irq(IRQ_IOP13XX_TIMER0, &iop13xx_timer_irq);
-}
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
index c072d94070da..9dd49cff21ff 100644
--- a/arch/arm/mach-iop32x/Kconfig
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -4,6 +4,9 @@ menu "IOP32x Implementation Options"
 
 comment "IOP32x Platform Types"
 
+config MACH_EP80219
+	bool
+
 config MACH_GLANTANK
 	bool "Enable support for the IO-Data GLAN Tank"
 	help
@@ -19,6 +22,7 @@ config ARCH_IQ80321
 
 config ARCH_IQ31244
 	bool "Enable support for EP80219/IQ31244"
+	select MACH_EP80219
 	help
 	  Say Y here if you want to run your kernel on the Intel EP80219
 	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index b9b765057dbe..45f4f13ae11b 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -31,6 +31,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <asm/page.h>
+#include <asm/arch/time.h>
 
 /*
  * GLAN Tank timer tick configuration.
@@ -38,12 +39,12 @@
 static void __init glantank_timer_init(void)
 {
 	/* 33.333 MHz crystal.  */
-	iop3xx_init_time(200000000);
+	iop_init_time(200000000);
 }
 
 static struct sys_timer glantank_timer = {
 	.init		= glantank_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index be4aedfa0de6..60e74309a458 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -36,36 +36,49 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-
+#include <asm/arch/time.h>
 
 /*
- * The EP80219 and IQ31244 use the same machine ID.  To find out
- * which of the two we're running on, we look at the processor ID.
+ * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
+ * same machine id, and the processor type was used to select board type.
+ * However this assumption breaks for an iq80219 board which is an iop219
+ * processor on an iq31244 board.  The force_ep80219 flag has been added
+ * for old boot loaders using the iq31244 machine id for an ep80219 platform.
  */
+static int force_ep80219;
+
 static int is_80219(void)
 {
 	extern int processor_id;
 	return !!((processor_id & 0xffffffe0) == 0x69052e20);
 }
 
+static int is_ep80219(void)
+{
+	if (machine_is_ep80219() || force_ep80219)
+		return 1;
+	else
+		return 0;
+}
+
 
 /*
  * EP80219/IQ31244 timer tick configuration.
  */
 static void __init iq31244_timer_init(void)
 {
-	if (is_80219()) {
+	if (is_ep80219()) {
 		/* 33.333 MHz crystal.  */
-		iop3xx_init_time(200000000);
+		iop_init_time(200000000);
 	} else {
 		/* 33.000 MHz crystal.  */
-		iop3xx_init_time(198000000);
+		iop_init_time(198000000);
 	}
 }
 
 static struct sys_timer iq31244_timer = {
 	.init		= iq31244_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
@@ -165,12 +178,18 @@ static struct hw_pci iq31244_pci __initdata = {
 
 static int __init iq31244_pci_init(void)
 {
-	if (machine_is_iq31244()) {
+	if (is_ep80219())
+		pci_common_init(&ep80219_pci);
+	else if (machine_is_iq31244()) {
 		if (is_80219()) {
-			pci_common_init(&ep80219_pci);
-		} else {
-			pci_common_init(&iq31244_pci);
+			printk("note: iq31244 board type has been selected\n");
+			printk("note: to select ep80219 operation:\n");
+			printk("\t1/ specify \"force_ep80219\" on the kernel"
+				" command line\n");
+			printk("\t2/ update boot loader to pass"
+				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
 		}
+		pci_common_init(&iq31244_pci);
 	}
 
 	return 0;
@@ -277,10 +296,18 @@ static void __init iq31244_init_machine(void)
 	platform_device_register(&iq31244_flash_device);
 	platform_device_register(&iq31244_serial_device);
 
-	if (is_80219())
+	if (is_ep80219())
 		pm_power_off = ep80219_power_off;
 }
 
+static int __init force_ep80219_setup(char *str)
+{
+	force_ep80219 = 1;
+	return 1;
+}
+
+__setup("force_ep80219", force_ep80219_setup);
+
 MACHINE_START(IQ31244, "Intel IQ31244")
 	/* Maintainer: Intel Corp. */
 	.phys_io	= IQ31244_UART,
@@ -291,3 +318,19 @@ MACHINE_START(IQ31244, "Intel IQ31244")
 	.timer		= &iq31244_timer,
 	.init_machine	= iq31244_init_machine,
 MACHINE_END
+
+/* There should have been an ep80219 machine identifier from the beginning.
+ * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
+ * "force_ep80219" on the kernel command line, otherwise iq31244 operation
+ * will be selected.
+ */
+MACHINE_START(EP80219, "Intel EP80219")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= IQ31244_UART,
+	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop32x_init_irq,
+	.timer		= &iq31244_timer,
+	.init_machine	= iq31244_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1f37b5501888..361c70c0f64c 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -33,6 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/arch/time.h>
 
 /*
  * IQ80321 timer tick configuration.
@@ -40,12 +41,12 @@
 static void __init iq80321_timer_init(void)
 {
 	/* 33.333 MHz crystal.  */
-	iop3xx_init_time(200000000);
+	iop_init_time(200000000);
 }
 
 static struct sys_timer iq80321_timer = {
 	.init		= iq80321_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 3ec1cd5c4f99..82598dc18d80 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -23,16 +23,12 @@ static u32 iop32x_mask;
 
 static inline void intctl_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static inline void intstr_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static void
@@ -60,6 +56,8 @@ void __init iop32x_init_irq(void)
 {
 	int i;
 
+	iop_init_cp6_handler();
+
 	intctl_write(0);
 	intstr_write(0);
 	if (machine_is_glantank() ||
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2499a7707e3c..5f07344d96f3 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -37,6 +37,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/arch/time.h>
 
 /*
  * N2100 timer tick configuration.
@@ -44,12 +45,12 @@
 static void __init n2100_timer_init(void)
 {
 	/* 33.000 MHz crystal.  */
-	iop3xx_init_time(198000000);
+	iop_init_time(198000000);
 }
 
 static struct sys_timer n2100_timer = {
 	.init		= n2100_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
@@ -120,6 +121,20 @@ static struct hw_pci n2100_pci __initdata = {
 	.map_irq	= n2100_pci_map_irq,
 };
 
+/*
+ * Both r8169 chips on the n2100 exhibit PCI parity problems.  Set
+ * the ->broken_parity_status flag for both ports so that the r8169
+ * driver knows it should ignore error interrupts.
+ */
+static void n2100_fixup_r8169(struct pci_dev *dev)
+{
+	if (dev->bus->number == 0 &&
+	    (dev->devfn == PCI_DEVFN(1, 0) ||
+	     dev->devfn == PCI_DEVFN(2, 0)))
+		dev->broken_parity_status = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
+
 static int __init n2100_pci_init(void)
 {
 	if (machine_is_n2100())
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 97a7b7488264..1a9e36138d80 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/arch/time.h>
 
 /*
  * IQ80331 timer tick configuration.
@@ -40,14 +41,14 @@ static void __init iq80331_timer_init(void)
 {
 	/* D-Step parts run at a higher internal bus frequency */
 	if (*IOP3XX_ATURID >= 0xa)
-		iop3xx_init_time(333000000);
+		iop_init_time(333000000);
 	else
-		iop3xx_init_time(266000000);
+		iop_init_time(266000000);
 }
 
 static struct sys_timer iq80331_timer = {
 	.init		= iq80331_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 9887bfc1c078..96d6f0f3cd21 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
+#include <asm/arch/time.h>
 
 /*
  * IQ80332 timer tick configuration.
@@ -40,14 +41,14 @@ static void __init iq80332_timer_init(void)
 {
 	/* D-Step parts and the iop333 run at a higher internal bus frequency */
 	if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
-		iop3xx_init_time(333000000);
+		iop_init_time(333000000);
 	else
-		iop3xx_init_time(266000000);
+		iop_init_time(266000000);
 }
 
 static struct sys_timer iq80332_timer = {
 	.init		= iq80332_timer_init,
-	.offset		= iop3xx_gettimeoffset,
+	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index 00b37f32d72e..c65ea78a2427 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -24,44 +24,32 @@ static u32 iop33x_mask1;
 
 static inline void intctl0_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static inline void intctl1_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static inline void intstr0_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static inline void intstr1_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static inline void intbase_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static inline void intsize_write(u32 val)
 {
-	iop3xx_cp6_enable();
 	asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val));
-	iop3xx_cp6_disable();
 }
 
 static void
@@ -110,6 +98,8 @@ void __init iop33x_init_irq(void)
 {
 	int i;
 
+	iop_init_cp6_handler();
+
 	intctl0_write(0);
 	intctl1_write(0);
 	intstr0_write(0);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index e316bd93313f..8a339cdfe222 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,7 +17,7 @@ config MACH_NSLU2
 	  NSLU2 NAS device. For more information on this platform,
 	  see http://www.nslu2-linux.org
 
-config ARCH_AVILA
+config MACH_AVILA
 	bool "Avila"
 	select PCI
 	help
@@ -25,6 +25,14 @@ config ARCH_AVILA
 	  Avila Network Platform. For more information on this platform,
 	  see <file:Documentation/arm/IXP4xx>.
 
+config MACH_LOFT
+    bool "Loft"
+    depends on MACH_AVILA
+    help
+	  Say 'Y' here if you want your kernel to support the Giant
+	  Shoulder Inc Loft board (a minor variation on the standard
+	  Gateworks Avila Network Platform).
+
 config ARCH_ADI_COYOTE
 	bool "Coyote"
 	select PCI
@@ -86,7 +94,7 @@ config MACH_NAS100D
 #
 config	ARCH_IXDP4XX
 	bool
-	depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
+	depends on ARCH_IXDP425 || MACH_IXDP465
 	default y
 
 #
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 640315d8b96a..746e297284ed 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -6,6 +6,7 @@ obj-pci-y	:=
 obj-pci-n	:=
 
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
@@ -15,6 +16,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-y	+= common.o
 
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
+obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
new file mode 100644
index 000000000000..3f867691d9f2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/avila-pci.c
+ *
+ * Gateworks Avila board-level PCI initialization
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-pci.c
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+void __init avila_pci_preinit(void)
+{
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
+		IRQ_AVILA_PCI_INTA,
+		IRQ_AVILA_PCI_INTB,
+		IRQ_AVILA_PCI_INTC,
+		IRQ_AVILA_PCI_INTD
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 &&
+	slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
+		pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
+		irq = pci_irq_table[(slot + pin - 2) % 4];
+	}
+
+	return irq;
+}
+
+struct hw_pci avila_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= avila_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= avila_map_irq,
+};
+
+int __init avila_pci_init(void)
+{
+	if (machine_is_avila() || machine_is_loft())
+		pci_common_init(&avila_pci);
+	return 0;
+}
+
+subsys_initcall(avila_pci_init);
+
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
new file mode 100644
index 000000000000..d59b8dc7dc7a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-ixp4xx/avila-setup.c
+ *
+ * Gateworks Avila board-setup
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-setup.c
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data avila_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource avila_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device avila_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &avila_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &avila_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+	.sda_pin	= AVILA_SDA_PIN,
+	.scl_pin	= AVILA_SCL_PIN,
+};
+
+static struct platform_device avila_i2c_controller = {
+	.name		= "IXP4XX-I2C",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &avila_i2c_gpio_pins,
+	},
+	.num_resources	= 0
+};
+
+static struct resource avila_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	},
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port avila_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device avila_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= avila_uart_data,
+	.num_resources		= 2,
+	.resource		= avila_uart_resources
+};
+
+static struct resource avila_pata_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "intrq",
+		.start	= IRQ_IXP4XX_GPIO12,
+		.end	= IRQ_IXP4XX_GPIO12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ixp4xx_pata_data avila_pata_data = {
+	.cs0_bits	= 0xbfff0043,
+	.cs1_bits	= 0xbfff0043,
+};
+
+static struct platform_device avila_pata = {
+	.name			= "pata_ixp4xx_cf",
+	.id			= 0,
+	.dev.platform_data      = &avila_pata_data,
+	.num_resources		= ARRAY_SIZE(avila_pata_resources),
+	.resource		= avila_pata_resources,
+};
+
+static struct platform_device *avila_devices[] __initdata = {
+	&avila_i2c_controller,
+	&avila_flash,
+	&avila_uart
+};
+
+static void __init avila_init(void)
+{
+	ixp4xx_sys_init();
+
+	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	avila_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
+
+	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+
+	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
+	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+
+	platform_device_register(&avila_pata);
+
+}
+
+MACHINE_START(AVILA, "Gateworks Avila Network Platform")
+	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= avila_init,
+MACHINE_END
+
+ /*
+  * Loft is functionally equivalent to Avila except that it has a
+  * different number for the maximum PCI devices.  The MACHINE
+  * structure below is identical to Avila except for the comment.
+  */
+#ifdef CONFIG_MACH_LOFT
+MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
+	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
+	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= avila_init,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index d5156c043f0b..99c1dc8033c8 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
 int __init ixdp425_pci_init(void)
 {
 	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-			machine_is_avila() || machine_is_ixdp465())
+			machine_is_ixdp465())
 		pci_common_init(&ixdp425_pci);
 	return 0;
 }
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index da72383ee301..04b1d56396a0 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -156,23 +156,3 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.init_machine	= ixdp425_init,
 MACHINE_END
 #endif
-
-/*
- * Avila is functionally equivalent to IXDP425 except that it adds
- * a CF IDE slot hanging off the expansion bus. When we have a 
- * driver for IXP4xx CF IDE with driver model support we'll move
- * Avila to it's own setup file.
- */
-#ifdef CONFIG_ARCH_AVILA
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
-	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixp4xx_map_io,
-	.init_irq	= ixp4xx_init_irq,
-	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
-	.init_machine	= ixdp425_init,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig
new file mode 100644
index 000000000000..8175ba92a2fa
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_NS9XXX
+
+menu "NS9xxx Implementations"
+
+config MACH_CC9P9360DEV
+	bool "Connect Core 9P 9360 on an A9M9750 Devboard"
+	select PROCESSOR_NS9360
+	select BOARD_A9M9750DEV
+	help
+	  Say Y here if you are using the Digi Connect Core 9P 9360
+	  on an A9M9750 Development Board.
+
+config PROCESSOR_NS9360
+	bool
+
+config BOARD_A9M9750DEV
+	bool
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile
new file mode 100644
index 000000000000..91e945f5e16d
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/Makefile
@@ -0,0 +1,5 @@
+obj-y := irq.o time.o generic.o
+
+obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
+
+obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot
new file mode 100644
index 000000000000..75ed64e90fa4
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/Makefile.boot
@@ -0,0 +1,2 @@
+zreladdr-y := 0x108000
+params_phys-y := 0x100
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
new file mode 100644
index 000000000000..25289884a607
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -0,0 +1,199 @@
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/irq.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/arch-ns9xxx/board.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/regs-bbu.h>
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+
+#include "board-a9m9750dev.h"
+
+static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
+	{ /* FPGA on CS0 */
+		.virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
+		.pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
+		.length = NS9XXX_CS0STAT_LENGTH,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init board_a9m9750dev_map_io(void)
+{
+	iotable_init(board_a9m9750dev_io_desc,
+		     ARRAY_SIZE(board_a9m9750dev_io_desc));
+}
+
+static void a9m9750dev_fpga_ack_irq(unsigned int irq)
+{
+	/* nothing */
+}
+
+static void a9m9750dev_fpga_mask_irq(unsigned int irq)
+{
+	FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0)));
+}
+
+static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
+{
+	a9m9750dev_fpga_mask_irq(irq);
+	a9m9750dev_fpga_ack_irq(irq);
+}
+
+static void a9m9750dev_fpga_unmask_irq(unsigned int irq)
+{
+	FPGA_IER |= 1 << (irq - FPGA_IRQ(0));
+}
+
+static struct irq_chip a9m9750dev_fpga_chip = {
+	.ack		= a9m9750dev_fpga_ack_irq,
+	.mask		= a9m9750dev_fpga_mask_irq,
+	.mask_ack	= a9m9750dev_fpga_maskack_irq,
+	.unmask		= a9m9750dev_fpga_unmask_irq,
+};
+
+static void a9m9750dev_fpga_demux_handler(unsigned int irq,
+		struct irq_desc *desc)
+{
+	int stat = FPGA_ISR;
+
+	while (stat != 0) {
+		int irqno = fls(stat) - 1;
+
+		stat &= ~(1 << irqno);
+
+		desc = irq_desc + FPGA_IRQ(irqno);
+
+		desc_handle_irq(irqno, desc);
+	}
+}
+
+void __init board_a9m9750dev_init_irq(void)
+{
+	u32 reg;
+	int i;
+
+	/*
+	 * configure gpio for IRQ_EXT2
+	 * use GPIO 11, because GPIO 32 is used for the LCD
+	 */
+	/* XXX: proper GPIO handling */
+	BBU_GC(2) &= ~0x2000;
+
+	for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
+		set_irq_chip(i, &a9m9750dev_fpga_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/* IRQ_EXT2: level sensitive + active low */
+	reg = SYS_EIC(2);
+	REGSET(reg, SYS_EIC, PLTY, AL);
+	REGSET(reg, SYS_EIC, LVEDG, LEVEL);
+	SYS_EIC(2) = reg;
+
+	set_irq_chained_handler(IRQ_EXT2,
+			a9m9750dev_fpga_demux_handler);
+}
+
+static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = {
+	{
+		.iobase         = FPGA_UARTA_BASE,
+		.membase        = (unsigned char*)FPGA_UARTA_BASE,
+		.mapbase        = FPGA_UARTA_BASE,
+		.irq            = IRQ_FPGA_UARTA,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		.iobase         = FPGA_UARTB_BASE,
+		.membase        = (unsigned char*)FPGA_UARTB_BASE,
+		.mapbase        = FPGA_UARTB_BASE,
+		.irq            = IRQ_FPGA_UARTB,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		.iobase         = FPGA_UARTC_BASE,
+		.membase        = (unsigned char*)FPGA_UARTC_BASE,
+		.mapbase        = FPGA_UARTC_BASE,
+		.irq            = IRQ_FPGA_UARTC,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		.iobase         = FPGA_UARTD_BASE,
+		.membase        = (unsigned char*)FPGA_UARTD_BASE,
+		.mapbase        = FPGA_UARTD_BASE,
+		.irq            = IRQ_FPGA_UARTD,
+		.iotype         = UPIO_MEM,
+		.uartclk        = 18432000,
+		.regshift       = 0,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+	}, {
+		/* end marker */
+	},
+};
+
+static struct platform_device board_a9m9750dev_serial_device = {
+	.name = "serial8250",
+	.dev = {
+		.platform_data = board_a9m9750dev_serial8250_port,
+	},
+};
+
+static struct platform_device *board_a9m9750dev_devices[] __initdata = {
+	&board_a9m9750dev_serial_device,
+};
+
+void __init board_a9m9750dev_init_machine(void)
+{
+	u32 reg;
+
+	/* setup static CS0: memory base ... */
+	REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB,
+			NS9XXX_CSxSTAT_PHYS(0) >> 12);
+
+	/* ... and mask */
+	reg = SYS_SMCSSMM(0);
+	REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
+	REGSET(reg, SYS_SMCSSMM, CSEx, EN);
+	SYS_SMCSSMM(0) = reg;
+
+	/* setup static CS0: memory configuration */
+	reg = MEM_SMC(0);
+	REGSET(reg, MEM_SMC, WSMC, OFF);
+	REGSET(reg, MEM_SMC, BSMC, OFF);
+	REGSET(reg, MEM_SMC, EW, OFF);
+	REGSET(reg, MEM_SMC, PB, 1);
+	REGSET(reg, MEM_SMC, PC, AL);
+	REGSET(reg, MEM_SMC, PM, DIS);
+	REGSET(reg, MEM_SMC, MW, 8);
+	MEM_SMC(0) = reg;
+
+	/* setup static CS0: timing */
+	MEM_SMWED(0) = 0x2;
+	MEM_SMOED(0) = 0x2;
+	MEM_SMRD(0) = 0x6;
+	MEM_SMWD(0) = 0x6;
+
+	platform_add_devices(board_a9m9750dev_devices,
+			ARRAY_SIZE(board_a9m9750dev_devices));
+}
+
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.h b/arch/arm/mach-ns9xxx/board-a9m9750dev.h
new file mode 100644
index 000000000000..edc75abbc5dd
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+void __init board_a9m9750dev_map_io(void);
+void __init board_a9m9750dev_init_machine(void);
+void __init board_a9m9750dev_init_irq(void);
diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c
new file mode 100644
index 000000000000..83e2b6532b22
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/generic.c
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/generic.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/board.h>
+
+static struct map_desc standard_io_desc[] __initdata = {
+	{ /* BBus */
+		.virtual = io_p2v(0x90000000),
+		.pfn = __phys_to_pfn(0x90000000),
+		.length = 0x00700000,
+		.type = MT_DEVICE,
+	}, { /* AHB */
+		.virtual = io_p2v(0xa0100000),
+		.pfn = __phys_to_pfn(0xa0100000),
+		.length = 0x00900000,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init ns9xxx_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+void __init ns9xxx_init_machine(void)
+{
+}
diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h
new file mode 100644
index 000000000000..687e291773f4
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/generic.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ns9xxx/generic.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/time.h>
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+void __init ns9xxx_init_irq(void);
+void __init ns9xxx_map_io(void);
+void __init ns9xxx_init_machine(void);
+
+extern struct sys_timer ns9xxx_timer;
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
new file mode 100644
index 000000000000..83d92724a971
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-ns9xxx/irq.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch-ns9xxx/board.h>
+
+#include "generic.h"
+
+static void ns9xxx_ack_irq_timer(unsigned int irq)
+{
+	u32 tc = SYS_TC(irq - IRQ_TIMER0);
+
+	REGSET(tc, SYS_TCx, INTC, SET);
+	SYS_TC(irq - IRQ_TIMER0) = tc;
+
+	REGSET(tc, SYS_TCx, INTC, UNSET);
+	SYS_TC(irq - IRQ_TIMER0) = tc;
+}
+
+void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = {
+	[IRQ_TIMER0] = ns9xxx_ack_irq_timer,
+	[IRQ_TIMER1] = ns9xxx_ack_irq_timer,
+	[IRQ_TIMER2] = ns9xxx_ack_irq_timer,
+	[IRQ_TIMER3] = ns9xxx_ack_irq_timer,
+};
+
+static void ns9xxx_mask_irq(unsigned int irq)
+{
+	/* XXX: better use cpp symbols */
+	SYS_IC(irq / 4) &= ~(1 << (7 + 8 * (3 - (irq & 3))));
+}
+
+static void ns9xxx_ack_irq(unsigned int irq)
+{
+	if (!ns9xxx_ack_irq_functions[irq]) {
+		printk(KERN_ERR "no ack function for irq %u\n", irq);
+		BUG();
+	}
+
+	ns9xxx_ack_irq_functions[irq](irq);
+	SYS_ISRADDR = 0;
+}
+
+static void ns9xxx_maskack_irq(unsigned int irq)
+{
+	ns9xxx_mask_irq(irq);
+	ns9xxx_ack_irq(irq);
+}
+
+static void ns9xxx_unmask_irq(unsigned int irq)
+{
+	/* XXX: better use cpp symbols */
+	SYS_IC(irq / 4) |= 1 << (7 + 8 * (3 - (irq & 3)));
+}
+
+static struct irq_chip ns9xxx_chip = {
+	.ack		= ns9xxx_ack_irq,
+	.mask		= ns9xxx_mask_irq,
+	.mask_ack	= ns9xxx_maskack_irq,
+	.unmask		= ns9xxx_unmask_irq,
+};
+
+void __init ns9xxx_init_irq(void)
+{
+	int i;
+
+	/* disable all IRQs */
+	for (i = 0; i < 8; ++i)
+		SYS_IC(i) = (4 * i) << 24 | (4 * i + 1) << 16 |
+			(4 * i + 2) << 8 | (4 * i + 3);
+
+	/* simple interrupt prio table:
+	 * prio(x) < prio(y) <=> x < y
+	 */
+	for (i = 0; i < 32; ++i)
+		SYS_IVA(i) = i;
+
+	for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
+		set_irq_chip(i, &ns9xxx_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
new file mode 100644
index 000000000000..760c9d0db7c3
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "board-a9m9750dev.h"
+#include "generic.h"
+
+static void __init mach_cc9p9360dev_map_io(void)
+{
+	ns9xxx_map_io();
+	board_a9m9750dev_map_io();
+}
+
+static void __init mach_cc9p9360dev_init_irq(void)
+{
+	ns9xxx_init_irq();
+	board_a9m9750dev_init_irq();
+}
+
+static void __init mach_cc9p9360dev_init_machine(void)
+{
+	ns9xxx_init_machine();
+	board_a9m9750dev_init_machine();
+}
+
+MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard")
+	.map_io = mach_cc9p9360dev_map_io,
+	.init_irq = mach_cc9p9360dev_init_irq,
+	.init_machine = mach_cc9p9360dev_init_machine,
+	.timer = &ns9xxx_timer,
+	.boot_params = 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c
new file mode 100644
index 000000000000..eec05f18714a
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/time.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-ns9xxx/time.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/clock.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch/system.h>
+#include "generic.h"
+
+#define TIMERCLOCKSELECT 64
+
+static u32 usecs_per_tick;
+
+static irqreturn_t
+ns9xxx_timer_interrupt(int irq, void *dev_id)
+{
+	write_seqlock(&xtime_lock);
+	timer_tick();
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned long ns9xxx_timer_gettimeoffset(void)
+{
+	/* return the microseconds which have passed since the last interrupt
+	 * was _serviced_.  That is, if an interrupt is pending or the counter
+	 * reloads, return one periode more. */
+
+	u32 counter1 = SYS_TR(0);
+	int pending = SYS_ISR & (1 << IRQ_TIMER0);
+	u32 counter2 = SYS_TR(0);
+	u32 elapsed;
+
+	if (pending || counter2 > counter1)
+		elapsed = 2 * SYS_TRC(0) - counter2;
+	else
+		elapsed = SYS_TRC(0) - counter1;
+
+	return (elapsed * usecs_per_tick) >> 16;
+
+}
+
+static struct irqaction ns9xxx_timer_irq = {
+	.name = "NS9xxx Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.handler = ns9xxx_timer_interrupt,
+};
+
+static void __init ns9xxx_timer_init(void)
+{
+	int tc;
+
+	usecs_per_tick =
+		SH_DIV(1000000 * TIMERCLOCKSELECT, ns9xxx_cpuclock(), 16);
+
+	/* disable timer */
+	if ((tc = SYS_TC(0)) & SYS_TCx_TEN)
+		SYS_TC(0) = tc & ~SYS_TCx_TEN;
+
+	SYS_TRC(0) = SH_DIV(ns9xxx_cpuclock(), (TIMERCLOCKSELECT * HZ), 0);
+
+	REGSET(tc, SYS_TCx, TEN, EN);
+	REGSET(tc, SYS_TCx, TLCS, DIV64); /* This must match TIMERCLOCKSELECT */
+	REGSET(tc, SYS_TCx, INTS, EN);
+	REGSET(tc, SYS_TCx, UDS, DOWN);
+	REGSET(tc, SYS_TCx, TDBG, STOP);
+	REGSET(tc, SYS_TCx, TSZ, 32);
+	REGSET(tc, SYS_TCx, REN, EN);
+	SYS_TC(0) = tc;
+
+	setup_irq(IRQ_TIMER0, &ns9xxx_timer_irq);
+}
+
+struct sys_timer ns9xxx_timer = {
+	.init = ns9xxx_timer_init,
+	.offset = ns9xxx_timer_gettimeoffset,
+};
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 6e113078f7ab..ad519390dd58 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/workqueue.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index cbe909bad79b..70014f751bc4 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -16,6 +16,8 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -103,7 +105,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
 
 static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	[0] = {
-		.modalias       = "lcd_lph8923",
+		.modalias		= "lcd_mipid",
 		.bus_num        = 2,
 		.chip_select    = 3,
 		.max_speed_hz   = 12000000,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 638490e62d5f..f625f6dd228a 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -432,8 +432,7 @@ static int omap1_clk_enable(struct clk *clk)
 			}
 
 			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				if (!cpu_is_omap24xx())
-					omap1_clk_deny_idle(clk->parent);
+				omap1_clk_deny_idle(clk->parent);
 		}
 
 		ret = clk->enable(clk);
@@ -454,8 +453,7 @@ static void omap1_clk_disable(struct clk *clk)
 		if (likely(clk->parent)) {
 			omap1_clk_disable(clk->parent);
 			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				if (!cpu_is_omap24xx())
-					omap1_clk_allow_idle(clk->parent);
+				omap1_clk_allow_idle(clk->parent);
 		}
 	}
 }
@@ -471,7 +469,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	if (unlikely(clk->enable_reg == 0)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
-		return 0;
+		return -EINVAL;
 	}
 
 	if (clk->flags & ENABLE_REG_32BIT) {
@@ -651,10 +649,18 @@ int __init omap1_clk_init(void)
 	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;
 
+#ifdef CONFIG_DEBUG_LL
+	/* Resets some clocks that may be left on from bootloader,
+	 * but leaves serial clocks on.
+ 	 */
+	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
 	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
 	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
 	omap_writew(reg, SOFT_REQ_REG);
-	omap_writew(0, SOFT_REQ_REG2);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, SOFT_REQ_REG2);
 
 	clk_init(&omap1_clk_functions);
 
@@ -685,7 +691,7 @@ int __init omap1_clk_init(void)
 
 	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
 	if (info != NULL) {
-		if (!cpu_is_omap1510())
+		if (!cpu_is_omap15xx())
 			crystal_type = info->system_clock_type;
 	}
 
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 6383a12ad970..410d3e78dd0f 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -238,7 +238,7 @@ void __init omap_init_irq(void)
 
 	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
-	else if (cpu_is_omap1510())
+	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
 		omap_unmask_irq(INT_1610_IH2_IRQ);
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 4834758d340c..0383ab334270 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -256,7 +256,8 @@ void omap_pm_suspend(void)
 		tps65010_set_led(LED1, OFF);
 	}
 
-	omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
 
 	/*
 	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
@@ -434,7 +435,8 @@ void omap_pm_suspend(void)
 		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
 	}
 
-	omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
 
 	/*
 	 * Reenable interrupts
@@ -696,14 +698,16 @@ static struct irqaction omap_wakeup_irq = {
 
 
 static struct pm_ops omap_pm_ops ={
-	.pm_disk_mode	= 0,
 	.prepare	= omap_pm_prepare,
 	.enter		= omap_pm_enter,
 	.finish		= omap_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init omap_pm_init(void)
 {
+	int error;
+
 	printk("Power Management for TI OMAP.\n");
 
 	/*
@@ -760,7 +764,9 @@ static int __init omap_pm_init(void)
 	omap_pm_init_proc();
 #endif
 
-	subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+	error = subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+	if (error)
+		printk(KERN_ERR "subsys_create_file failed: %d\n", error);
 
 	if (cpu_is_omap16xx()) {
 		/* configure LOW_PWR pin */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 4cc98a578e4b..10a4fe88b2fd 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-omap1/serial.c
  *
- * OMAP1 CPU identification code
+ * OMAP1 serial support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -59,7 +59,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
 	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
 
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
 		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
 	}
@@ -121,7 +121,7 @@ void __init omap_serial_init(void)
 		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
 	}
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
@@ -147,10 +147,10 @@ void __init omap_serial_init(void)
 				printk("Could not get uart1_ck\n");
 			else {
 				clk_enable(uart1_ck);
-				if (cpu_is_omap1510())
+				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
-			if (cpu_is_omap1510()) {
+			if (cpu_is_omap15xx()) {
 				omap_cfg_reg(UART1_TX);
 				omap_cfg_reg(UART1_RTS);
 				if (machine_is_omap_innovator()) {
@@ -167,12 +167,12 @@ void __init omap_serial_init(void)
 				printk("Could not get uart2_ck\n");
 			else {
 				clk_enable(uart2_ck);
-				if (cpu_is_omap1510())
+				if (cpu_is_omap15xx())
 					clk_set_rate(uart2_ck, 12000000);
 				else
 					clk_set_rate(uart2_ck, 48000000);
 			}
-			if (cpu_is_omap1510()) {
+			if (cpu_is_omap15xx()) {
 				omap_cfg_reg(UART2_TX);
 				omap_cfg_reg(UART2_RTS);
 				if (machine_is_omap_innovator()) {
@@ -189,10 +189,10 @@ void __init omap_serial_init(void)
 				printk("Could not get uart3_ck\n");
 			else {
 				clk_enable(uart3_ck);
-				if (cpu_is_omap1510())
+				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
-			if (cpu_is_omap1510()) {
+			if (cpu_is_omap15xx()) {
 				omap_cfg_reg(UART3_TX);
 				omap_cfg_reg(UART3_RX);
 			}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 3b1ad1d981a3..1e7ed6d22ca9 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -39,7 +39,6 @@
 #include "prcm-regs.h"
 
 #include <asm/io.h>
-#include <asm/delay.h>
 
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
@@ -179,9 +178,11 @@ static int h4_select_irda(struct device *dev, int state)
 	return err;
 }
 
-static void set_trans_mode(void *data)
+static void set_trans_mode(struct work_struct *work)
 {
-	int *mode = data;
+	struct omap_irda_config *irda_config =
+		container_of(work, struct omap_irda_config, gpio_expa.work);
+	int mode = irda_config->mode;
 	unsigned char expa;
 	int err = 0;
 
@@ -191,7 +192,7 @@ static void set_trans_mode(void *data)
 
 	expa &= ~0x01;
 
-	if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */
+	if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
 		expa |= 0x01;
 	}
 
@@ -204,9 +205,9 @@ static int h4_transceiver_mode(struct device *dev, int mode)
 {
 	struct omap_irda_config *irda_config = dev->platform_data;
 
+	irda_config->mode = mode;
 	cancel_delayed_work(&irda_config->gpio_expa);
-	PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
-#error this is not permitted - mode is an argument variable
+	PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
 	schedule_delayed_work(&irda_config->gpio_expa, 0);
 
 	return 0;
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 0de201c3d50b..5170481afeab 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -27,6 +27,7 @@
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
+#include <asm/div64.h>
 
 #include "prcm-regs.h"
 #include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 8816f5a33a28..162978fd5359 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1013,7 +1013,8 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.name		= "dss2_fck",
 	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED,
+				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED |
+				DELAYED_APP,
 	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
 	.enable_bit	= 1,
 	.src_offset	= 13,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d7eee99b7e3f..6f4a5436d0ce 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -370,10 +370,10 @@ static int omap2_pm_finish(suspend_state_t state)
 }
 
 static struct pm_ops omap_pm_ops = {
-	.pm_disk_mode	= 0,
 	.prepare	= omap2_pm_prepare,
 	.enter		= omap2_pm_enter,
 	.finish		= omap2_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 int __init omap2_pm_init(void)
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 973189cd9766..45d1aaa51b57 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 
 #include <asm/mach/time.h>
 #include <asm/arch/dmtimer.h>
@@ -64,7 +65,7 @@ static void __init omap2_gp_timer_init(void)
 	BUG_ON(gptimer == NULL);
 
 	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
-	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
+	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 	tick_period -= 1;
 
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 3649cd3dfc9a..2a137f33f752 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -107,50 +107,19 @@ static int pnx4008_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		pnx4008_suspend();
 		break;
-	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-	default:
-		return -EINVAL;
 	}
 	return 0;
 }
 
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int pnx4008_pm_prepare(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		break;
-
-	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-		break;
-
-	default:
-		return -EINVAL;
-		break;
-	}
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int pnx4008_pm_finish(suspend_state_t state)
+static int pnx4008_pm_valid(suspend_state_t state)
 {
-	return 0;
+	return (state == PM_SUSPEND_STANDBY) ||
+	       (state == PM_SUSPEND_MEM);
 }
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
 static struct pm_ops pnx4008_pm_ops = {
-	.prepare = pnx4008_pm_prepare,
 	.enter = pnx4008_pm_enter,
-	.finish = pnx4008_pm_finish,
+	.valid = pnx4008_pm_valid,
 };
 
 static int __init pnx4008_pm_init(void)
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 165017de8d0d..392c38717362 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -16,7 +16,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/apm-emulation.h>
+#include <linux/apm-emulation.h>
+
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 9de1278d234f..b8cb79f899d5 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -36,6 +36,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
@@ -106,13 +107,16 @@ unsigned long long sched_clock(void)
  * Handy function to set GPIO alternate functions
  */
 
-void pxa_gpio_mode(int gpio_mode)
+int pxa_gpio_mode(int gpio_mode)
 {
 	unsigned long flags;
 	int gpio = gpio_mode & GPIO_MD_MASK_NR;
 	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
 	int gafr;
 
+	if (gpio > PXA_LAST_GPIO)
+		return -EINVAL;
+
 	local_irq_save(flags);
 	if (gpio_mode & GPIO_DFLT_LOW)
 		GPCR(gpio) = GPIO_bit(gpio);
@@ -125,11 +129,33 @@ void pxa_gpio_mode(int gpio_mode)
 	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
 	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
 	local_irq_restore(flags);
+
+	return 0;
 }
 
 EXPORT_SYMBOL(pxa_gpio_mode);
 
 /*
+ * Return GPIO level
+ */
+int pxa_gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+EXPORT_SYMBOL(pxa_gpio_get_value);
+
+/*
+ * Set output GPIO level
+ */
+void pxa_gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+EXPORT_SYMBOL(pxa_gpio_set_value);
+
+/*
  * Routine to safely enable or disable a clock in the CKEN
  */
 void pxa_set_cken(int clock, int enable)
@@ -338,6 +364,27 @@ static struct platform_device i2c_device = {
 	.num_resources	= ARRAY_SIZE(i2c_resources),
 };
 
+#ifdef CONFIG_PXA27x
+static struct resource i2c_power_resources[] = {
+	{
+		.start	= 0x40f00180,
+		.end	= 0x40f001a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_power_device = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+};
+#endif
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
 	i2c_device.dev.platform_data = info;
@@ -392,6 +439,9 @@ static struct platform_device *devices[] __initdata = {
 	&stuart_device,
 	&pxaficp_device,
 	&i2c_device,
+#ifdef CONFIG_PXA27x
+	&i2c_power_device,
+#endif
 	&i2s_device,
 	&pxartc_device,
 };
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index b4d8276d6050..6bf15ae73848 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -223,14 +223,11 @@ int pxa_pm_finish(suspend_state_t state)
 
 EXPORT_SYMBOL_GPL(pxa_pm_finish);
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
 static struct pm_ops pxa_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
 	.prepare	= pxa_pm_prepare,
 	.enter		= pxa_pm_enter,
 	.finish		= pxa_pm_finish,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init pxa_pm_init(void)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index b1d8cfca245a..f9d1b61e1185 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -20,10 +20,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/apm-emulation.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index b97d543d9364..745a4dc7acdd 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -16,7 +16,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/apm-emulation.h>
+#include <linux/apm-emulation.h>
+
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7915a5a22865..72738771fb57 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -28,6 +28,7 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <asm/arch/pxa-regs.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
@@ -35,8 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/tosa.h>
 
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 17f5f4439fe7..35156ca39df7 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -10,10 +10,21 @@ config MACH_REALVIEW_EB
 config REALVIEW_MPCORE
 	bool "Support MPcore tile"
 	depends on MACH_REALVIEW_EB
+	select CACHE_L2X0
 	help
 	  Enable support for the MPCore tile on the Realview platform.
 	  Since there are device address and interrupt differences, a
 	  kernel built with this option enabled is not compatible with
 	  other tiles.
 
+config REALVIEW_MPCORE_REVB
+	bool "Support MPcore RevB tile"
+	depends on REALVIEW_MPCORE
+	default n
+	help
+	  Enable support for the MPCore RevB tile on the Realview platform.
+	  Since there are device address differences, a
+	  kernel built with this option enabled is not compatible with
+	  other tiles.
+
 endmenu
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index b8484e15dacb..fce3596f9950 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -52,13 +52,14 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
 	pen_release = -1;
+	smp_wmb();
 
 	/*
 	 * Synchronise with the boot thread.
@@ -102,6 +103,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
+		smp_rmb();
 		if (pen_release == -1)
 			break;
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9741b4d3c9cf..3dba666151db 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -57,7 +58,26 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_REALVIEW_MPCORE
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	},
+#endif
+	{
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
 		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
 		.length		= SZ_4K,
@@ -138,19 +158,29 @@ static void __init gic_init_irq(void)
 #ifdef CONFIG_REALVIEW_MPCORE
 	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	pldctrl |= 0x00800000;	/* New irq mode */
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
-	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+#ifdef CONFIG_REALVIEW_MPCORE
+	gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
+	gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
+	gic_cascade_irq(1, IRQ_EB_IRQ1);
+#endif
 }
 
 static void __init realview_eb_init(void)
 {
 	int i;
 
+#ifdef CONFIG_REALVIEW_MPCORE
+	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+	l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
 	clk_register(&realview_clcd_clk);
 
 	platform_device_register(&realview_flash_device);
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
new file mode 100644
index 000000000000..deab0722836e
--- /dev/null
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -0,0 +1,13 @@
+# arch/arm/mach-s3c2400/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+
+
+menu "S3C2400 Machines"
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile
new file mode 100644
index 000000000000..7e23f4e13766
--- /dev/null
+++ b/arch/arm/mach-s3c2400/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c2400/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2400)	+= gpio.o
+
+# Machine support
+
diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 1576d01d5f82..758e160410e9 100644
--- a/arch/arm/mach-s3c2410/s3c2400-gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
+/* linux/arch/arm/mach-s3c2400/gpio.c
  *
  * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
  *
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index eb4ec411312b..d4b013b283c3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,54 +1,51 @@
-if ARCH_S3C2410
+# arch/arm/mach-s3c2410/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
 
-menu "S3C24XX Implementations"
+config CPU_S3C2410
+	bool
+	depends on ARCH_S3C2410
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	help
+	  Support for S3C2410 and S3C2410A family from the S3C24XX line
+	  of Samsung Mobile CPUs.
 
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
+config CPU_S3C2410_DMA
+	bool
+	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+	default y if CPU_S3C2410 || CPU_S3C2442
 	help
-	   Say Y here if you are using the American Microsystems M5900 Series
-           <http://www.amltd.com>
+	  DMA device selection for S3C2410 and compatible CPUs
 
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select PM_SIMTEC if PM
+config S3C2410_PM
+	bool
 	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
+	  Power Management code common to S3C2410 and better
 
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select PM_SIMTEC if PM
+config S3C2410_GPIO
+	bool
 	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
+	  GPIO code for S3C2410 and similar processors
 
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select CPU_S3C2410
-	select PM_SIMTEC if PM
-	select ISA
+config S3C2410_CLOCK
+	bool
 	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
+	  Clock code for the S3C2410, and similar processors
 
-	  Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
 
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
+menu "S3C2410 Machines"
 
-config PM_H1940
-	bool
+config ARCH_SMDK2410
+	bool "SMDK2410/A9M2410"
+	select CPU_S3C2410
+	select MACH_SMDK
 	help
-	  Internal node for H1940 and related PM
+	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
+           <http://www.fsforth.de>
 
 config ARCH_H1940
 	bool "IPAQ H1940"
@@ -57,7 +54,10 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
-	  <http://www.handhelds.org/projects/h1940.html>.
+config PM_H1940
+	bool
+	help
+	  Internal node for H1940 and related PM
 
 config MACH_N30
 	bool "Acer N30"
@@ -65,53 +65,36 @@ config MACH_N30
 	help
 	  Say Y here if you are using the Acer N30
 
-	  <http://zoo.weinigel.se/n30>.
-
-config MACH_SMDK
-	bool
-	help
-	  Common machine code for SMDK2410 and SMDK2440
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
+config ARCH_BAST
+	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
-	select MACH_SMDK
+	select PM_SIMTEC if PM
+	select ISA
 	help
-	   Say Y here if you are using the SMDK2410 or the derived module A9M2410
-           <http://www.fsforth.de>
+	  Say Y here if you are using the Simtec Electronics EB2410ITX
+	  development board (also known as BAST)
 
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select MACH_SMDK
+config MACH_OTOM
+ 	bool "NexVision OTOM Board"
+ 	select CPU_S3C2410
 	help
-	  Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
-	default y if ARCH_S3C2440
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
+ 	  Say Y here if you are using the Nex Vision OTOM board
 
-config MACH_S3C2413
-	bool
+config MACH_AML_M5900
+	bool "AML M5900 Series"
+	select CPU_S3C2410
+	select PM_SIMTEC if PM
 	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
+	   Say Y here if you are using the American Microsystems M5900 Series
+           <http://www.amltd.com>
 
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select CPU_S3C2412
-	select MACH_S3C2413
-	select MACH_SMDK
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
 	help
-	  Say Y here if you are using an SMDK2413
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
@@ -120,202 +103,11 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-	  This linux port is currently being maintained by Simtec, on behalf
-	  of Thorcom. Any queries, please contact Thorcom first.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select PM_H1940 if PM
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-	  See <http://www.handhelds.org/projects/rx3715.html> for more
-	  information on this project
-
-config MACH_OTOM
- 	bool "NexVision OTOM Board"
- 	select CPU_S3C2410
-	help
- 	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select CPU_S3C2412
+config MACH_QT2410
+	bool "QT2410"
+	select CPU_S3C2410
 	help
-	  Say Y here if you are using an VSTMS board
+	   Say Y here if you are using the Armzone QT2410
 
 endmenu
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config CPU_S3C2410_DMA
-	bool
-	depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
-	default y if CPU_S3C2410 || CPU_S3C2442
-	help
-	  DMA device selection for S3C2410 and compatible CPUs
-
-config CPU_S3C2410
-	bool
-	depends on ARCH_S3C2410
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-# internal node to signify if we are only dealing with an S3C2412
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
-	default y if CPU_S3C2412
-
-config S3C2412_PM
-	bool
-	help
-	  Internal config node to apply S3C2412 power management
-
-config CPU_S3C2412
-	bool
-	depends on ARCH_S3C2410
-	select S3C2412_PM if PM
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C244X
-	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C2440
-	bool
-	depends on ARCH_S3C2410
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2420
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-comment "S3C2410 Boot"
-
-config S3C2410_BOOT_WATCHDOG
-	bool "S3C2410 Initialisation watchdog"
-	depends on ARCH_S3C2410 && S3C2410_WATCHDOG
-	help
-	  Say y to enable the watchdog during the kernel decompression
-	  stage. If the kernel fails to uncompress, then the watchdog
-	  will trigger a reset and the system should restart.
-
-	  Although this uses the same hardware unit as the kernel watchdog
-	  driver, it is not a replacement for it. If you use this option,
-	  you will have to use the watchdg driver to either stop the timeout
-	  or restart it. If you do not, then your kernel will reboot after
-	  startup.
-
-	  The driver uses a fixed timeout value, so the exact time till the
-	  system resets depends on the value of PCLK. The timeout on an
-	  200MHz s3c2410 should be about 30 seconds.
-
-config S3C2410_BOOT_ERROR_RESET
-	bool "S3C2410 Reboot on decompression error"
-	depends on ARCH_S3C2410
-	help
-	  Say y here to use the watchdog to reset the system if the
-	  kernel decompressor detects an error during decompression.
-
-
-comment "S3C2410 Setup"
-
-config S3C2410_DMA
-	bool "S3C2410 DMA support"
-	depends on ARCH_S3C2410
-	help
-	  S3C2410 DMA support. This is needed for drivers like sound which
-	  use the S3C2410's DMA system to move data to and from the
-	  peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-	bool "S3C2410 DMA support debug"
-	depends on ARCH_S3C2410 && S3C2410_DMA
-	help
-	  Enable debugging output for the DMA code. This option sends info
-	  to the kernel log, at priority KERN_DEBUG.
-
-	  Note, it is easy to create and fill the log buffer in a small
-	  amount of time, as well as using an significant percentage of
-	  the CPU time doing so.
-
-
-config S3C2410_PM_DEBUG
-	bool "S3C2410 PM Suspend debug"
-	depends on ARCH_S3C2410 && PM
-	help
-	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
-	  for more information.
-
-config S3C2410_PM_CHECK
-	bool "S3C2410 PM Suspend Memory CRC"
-	depends on ARCH_S3C2410 && PM && CRC32
-	help
- 	  Enable the PM code's memory area checksum over sleep. This option
-	  will generate CRCs of all blocks of memory, and store them before
-	  going to sleep. The blocks are then checked on resume for any
-	  errors.
-
-config S3C2410_PM_CHECK_CHUNKSIZE
-	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
-	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
-	default 64
-	help
-	  Set the chunksize in Kilobytes of the CRC for checking memory
-	  corruption over suspend and resume. A smaller value will mean that
-	  the CRC data block will take more memory, but wil identify any
-	  faults with better precision.
-
-config PM_SIMTEC
-	bool
-	help
-	  Common power management code for systems that are
-	  compatible with the Simtec style of power management
-
-config S3C2410_LOWLEVEL_UART_PORT
-	int "S3C2410 UART to use for low-level messages"
-	default 0
-	help
-	  Choice of which UART port to use for the low-level messages,
-	  such as the `Uncompressing...` at start time. The value of
-	  this configuration should be between zero and two. The port
-	  must have been initialised by the boot-loader before use.
-
-	  Note, this does not affect the port used by the debug messages,
-	  which is a separate configuration.
-
-endif
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 27663e28cc88..9a3d3d24c084 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -1,92 +1,31 @@
-
+# arch/arm/mach-s3c2410/Makefile
 #
-# Makefile for the linux kernel.
+# Copyright 2007 Simtec Electronics
 #
+# Licensed under GPLv2
 
-# Object file lists.
-
-obj-y			:= cpu.o irq.o time.o gpio.o clock.o devs.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-obj-dma-y		:=
-obj-dma-n		:=
-
-# DMA
-obj-$(CONFIG_S3C2410_DMA)	+= dma.o
-
-# S3C2400 support files
-obj-$(CONFIG_CPU_S3C2400)	+= s3c2400-gpio.o
-
-# S3C2410 support files
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-gpio.o
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410-irq.o
-
-obj-$(CONFIG_S3C2410_PM)	+= s3c2410-pm.o s3c2410-sleep.o
-obj-$(CONFIG_CPU_S3C2410_DMA)	+= s3c2410-dma.o
-
-# Power Management support
-
-obj-$(CONFIG_PM)		+= pm.o sleep.o
-obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
-obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
-
-# S3C2412 support
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
-obj-dma-$(CONFIG_CPU_S3C2412)	+= s3c2412-dma.o
-
-obj-$(CONFIG_S3C2412_PM)	+= s3c2412-pm.o
-
-#
-# S3C244X support
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-
-# Clock control
-
-obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
-
-# S3C2440 support
-
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o s3c2440-dsc.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440-clock.o
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2410-gpio.o
-obj-dma-$(CONFIG_CPU_S3C2440)	+= s3c2440-dma.o
+obj-$(CONFIG_CPU_S3C2410)	+= irq.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CLOCK)	+= clock.o
 
-# S3C2442 support
+# Machine support
 
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442-clock.o
-
-# bast extras
-
-obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
-
-# merge in dma objects
-
-obj-y				+= $(obj-dma-y)
-
-# machine specific support
-
-obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
+obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
 obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
-obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
+obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
 obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
\ No newline at end of file
+obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
+obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
+obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 379efe70778c..daeba427d781 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -39,7 +39,7 @@
 #include <asm/arch/bast-map.h>
 #include <asm/arch/bast-irq.h>
 
-#include "irq.h"
+#include <asm/plat-s3c24xx/irq.h>
 
 #if 0
 #include <asm/debug-ll.h>
diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h
index e5d03311752c..e98543742eb9 100644
--- a/arch/arm/mach-s3c2410/bast.h
+++ b/arch/arm/mach-s3c2410/bast.h
@@ -1,2 +1,2 @@
-
+/* linux/arch/arm/mach-s3c2410/bast.h
 extern void bast_init_irq(void);
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e13fb6778890..5b4831c4c1d8 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -1,15 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- **  Copyright (C) 2004 ARM Limited.
- **  Written by Deep Blue Solutions Limited.
- *
+ * S3C2410,S3C2440,S3C2442 Clock control support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,418 +26,251 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/platform_device.h>
 #include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
 
 #include <asm/hardware.h>
-#include <asm/irq.h>
 #include <asm/io.h>
 
+#include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "clock.h"
-#include "cpu.h"
-
-/* clock information */
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
 {
-	return 0;
-}
-
-/* Clock API calls */
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p;
-	struct clk *clk = ERR_PTR(-ENOENT);
-	int idno;
+	clkcon = __raw_readl(S3C2410_CLKCON);
 
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
+	if (enable)
+		clkcon |= clocks;
 	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, list) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 &&
-		    try_module_get(p->owner)) {
-			clk = p;
-			break;
-		}
-	}
-
-	/* check for the case where a device was supplied, but the
-	 * clock that was being searched for is not device specific */
-
-	if (IS_ERR(clk)) {
-		list_for_each_entry(p, &clocks, list) {
-			if (p->id == -1 && strcmp(id, p->name) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				break;
-			}
-		}
-	}
+		clkcon &= ~clocks;
 
-	mutex_unlock(&clocks_mutex);
-	return clk;
-}
+	/* ensure none of the special function bits set */
+	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
 
-void clk_put(struct clk *clk)
-{
-	module_put(clk->owner);
-}
+	__raw_writel(clkcon, S3C2410_CLKCON);
 
-int clk_enable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return -EINVAL;
-
-	clk_enable(clk->parent);
-
-	mutex_lock(&clocks_mutex);
-
-	if ((clk->usage++) == 0)
-		(clk->enable)(clk, 1);
-
-	mutex_unlock(&clocks_mutex);
 	return 0;
 }
 
-void clk_disable(struct clk *clk)
-{
-	if (IS_ERR(clk) || clk == NULL)
-		return;
-
-	mutex_lock(&clocks_mutex);
-
-	if ((--clk->usage) == 0)
-		(clk->enable)(clk, 0);
-
-	mutex_unlock(&clocks_mutex);
-	clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (IS_ERR(clk))
-		return 0;
-
-	if (clk->rate != 0)
-		return clk->rate;
-
-	if (clk->get_rate != NULL)
-		return (clk->get_rate)(clk);
-
-	if (clk->parent != NULL)
-		return clk_get_rate(clk->parent);
-
-	return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (!IS_ERR(clk) && clk->round_rate)
-		return (clk->round_rate)(clk, rate);
-
-	return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = (clk->set_rate)(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
+static int s3c2410_upll_enable(struct clk *clk, int enable)
 {
-	return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = 0;
-
-	if (IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-
-	if (clk->set_parent)
-		ret = (clk->set_parent)(clk, parent);
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-struct clk clk_xtal = {
-	.name		= "xtal",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_mpll = {
-	.name		= "mpll",
-	.id		= -1,
-};
-
-struct clk clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_f = {
-	.name		= "fclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_mpll,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_h = {
-	.name		= "hclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_p = {
-	.name		= "pclk",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-};
-
-struct clk clk_usb_bus = {
-	.name		= "usb-bus",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long orig = clkslow;
 
 	if (enable)
-		dclkcon |= clk->ctrlbit;
+		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
 	else
-		dclkcon &= ~clk->ctrlbit;
+		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
 
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+	__raw_writel(clkslow, S3C2410_CLKSLOW);
 
-	return 0;
-}
+	/* if we started the UPLL, then allow to settle */
 
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+		udelay(200);
 
 	return 0;
 }
 
-
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_xtal)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_dclk0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_NAND,
+	}, {
+		.name		= "sdi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_SPI,
 	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.id		= -1,
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable		= s3c24xx_dclk_enable,
-	.set_parent	= s3c24xx_dclk_setparent,
 };
 
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_UART2,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2410_clkcon_enable,
+		.ctrlbit	= S3C2410_CLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= 0,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+	}, {
+		.name		= "usb-bus-gadget",
+		.id		= -1,
+		.parent		= &clk_usb_bus,
+	},
 };
 
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.id		= -1,
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
-	.name		= "uclk",
-	.id		= -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
-	clk->owner = THIS_MODULE;
-
-	if (clk->enable == NULL)
-		clk->enable = clk_null_enable;
-
-	/* add to the list of available clocks */
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->list, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-/* initalise all the clocks */
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
 
-int __init s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk)
+int __init s3c2410_baseclk_add(void)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
+	struct clk *clkp;
+	struct clk *xtal;
+	int ret;
+	int ptr;
 
-	/* initialise the main system clocks */
+	clk_upll.enable = s3c2410_upll_enable;
 
-	clk_xtal.rate = xtal;
-	clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+		printk(KERN_ERR "failed to register usb bus clock\n");
 
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
+	/* register clocks from clock array */
 
-	/* assume uart clocks are correctly setup */
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		/* ensure that we note the clock state */
 
-	/* register our clocks */
+		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
 
-	if (s3c24xx_register_clock(&clk_xtal) < 0)
-		printk(KERN_ERR "failed to register master xtal\n");
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
 
-	if (s3c24xx_register_clock(&clk_mpll) < 0)
-		printk(KERN_ERR "failed to register mpll clock\n");
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsytems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
 
-	if (s3c24xx_register_clock(&clk_upll) < 0)
-		printk(KERN_ERR "failed to register upll clock\n");
+		s3c2410_clkcon_enable(clkp, 0);
+	}
 
-	if (s3c24xx_register_clock(&clk_f) < 0)
-		printk(KERN_ERR "failed to register cpu fclk\n");
+	/* show the clock-slow value */
 
-	if (s3c24xx_register_clock(&clk_h) < 0)
-		printk(KERN_ERR "failed to register cpu hclk\n");
+	xtal = clk_get(NULL, "xtal");
 
-	if (s3c24xx_register_clock(&clk_p) < 0)
-		printk(KERN_ERR "failed to register cpu pclk\n");
+	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+	       print_mhz(clk_get_rate(xtal) /
+			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
 
 	return 0;
 }
diff --git a/arch/arm/mach-s3c2410/clock.h b/arch/arm/mach-s3c2410/clock.h
deleted file mode 100644
index 7f0ea03e1d49..000000000000
--- a/arch/arm/mach-s3c2410/clock.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2410/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	int		    (*enable)(struct clk *, int enable);
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_xtal;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern struct mutex clocks_mutex;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-
-extern int s3c24xx_setup_clocks(unsigned long xtal,
-				unsigned long fclk,
-				unsigned long hclk,
-				unsigned long pclk);
diff --git a/arch/arm/mach-s3c2410/common-smdk.h b/arch/arm/mach-s3c2410/common-smdk.h
deleted file mode 100644
index 0e3a3be330a3..000000000000
--- a/arch/arm/mach-s3c2410/common-smdk.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/common-smdk.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern void smdk_machine_init(void);
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
deleted file mode 100644
index be42e4032a6d..000000000000
--- a/arch/arm/mach-s3c2410/cpu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* arch/arm/mach-s3c2410/cpu.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
-
-/* forward declaration */
-struct s3c24xx_uart_resources;
-struct platform_device;
-struct s3c2410_uartcfg;
-struct map_desc;
-
-/* core initialisation functions */
-
-extern void s3c24xx_init_irq(void);
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
-extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
-extern void s3c24xx_init_uartdevs(char *name,
-				  struct s3c24xx_uart_resources *res,
-				  struct s3c2410_uartcfg *cfg, int no);
-
-/* the board structure is used at first initialsation time
- * to get info such as the devices to register for this
- * board. This is done because platfrom_add_devices() cannot
- * be called from the map_io entry.
-*/
-
-struct s3c24xx_board {
-	struct platform_device  **devices;
-	unsigned int              devices_count;
-
-	struct clk		**clocks;
-	unsigned int		  clocks_count;
-};
-
-extern void s3c24xx_set_board(struct s3c24xx_board *board);
-
-/* timer for 2410/2440 */
-
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
-
-/* system device classes */
-
-extern struct sysdev_class s3c2410_sysclass;
-extern struct sysdev_class s3c2412_sysclass;
-extern struct sysdev_class s3c2440_sysclass;
-extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/mach-s3c2410/devs.h b/arch/arm/mach-s3c2410/devs.h
deleted file mode 100644
index 14fb0bade716..000000000000
--- a/arch/arm/mach-s3c2410/devs.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* arch/arm/mach-s3c2410/devs.h
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 standard platform devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-#include <linux/platform_device.h>
-
-struct s3c24xx_uart_resources {
-	struct resource		*resources;
-	unsigned long		 nr_resources;
-};
-
-extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
-
-extern struct platform_device *s3c24xx_uart_devs[];
-extern struct platform_device *s3c24xx_uart_src[];
-
-extern struct platform_device s3c_device_usb;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_wdt;
-extern struct platform_device s3c_device_i2c;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_sdi;
-
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-
-extern struct platform_device s3c_device_nand;
-
-extern struct platform_device s3c_device_timer0;
-extern struct platform_device s3c_device_timer1;
-extern struct platform_device s3c_device_timer2;
-extern struct platform_device s3c_device_timer3;
-
-extern struct platform_device s3c_device_usbgadget;
-
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-
-#endif
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index fa860e716b4f..67d1ad363973 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 DMA core
+ * S3C2410 DMA selection
  *
  * http://armlinux.simtec.co.uk/
  *
@@ -12,1430 +12,170 @@
  * published by the Free Software Foundation.
 */
 
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
 #include <linux/sysdev.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/serial_core.h>
 
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
 #include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/arch/map.h>
-
-#include "dma.h"
-
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-struct s3c24xx_dma_selection dma_sel;
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
-	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
-	writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
-	unsigned long         dcsrc;
-	unsigned long         disrc;
-	unsigned long         dstat;
-	unsigned long         dcon;
-	unsigned long         dmsktrig;
+#include <asm/arch/dma.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/dma.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_USB_EP1] = {
+		.name		= "usb-ep1",
+		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP2] = {
+		.name		= "usb-ep2",
+		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP3] = {
+		.name		= "usb-ep3",
+		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+	},
+	[DMACH_USB_EP4] = {
+		.name		= "usb-ep4",
+		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+	},
 };
 
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
-{
-	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
-	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
-	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
-	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-}
-
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
-		 struct s3c2410_dma_regstate *regs)
-{
-	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
-	       chan->number, fname, line,
-	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
-	       regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-
-	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
-	       chan->number, fname, line, chan->load_state,
-	       chan->curr, chan->next, chan->end);
-
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_regstate state;
-
-	dmadbg_capture(chan, &state);
-	dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
-	if (channel & DMACH_LOW_LEVEL)
-		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
-	else
-		return dma_chan_map[channel];
-}
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
 {
-	if (stats == NULL)
-		return;
-
-	if (val > stats->timeout_longest)
-		stats->timeout_longest = val;
-	if (val < stats->timeout_shortest)
-		stats->timeout_shortest = val;
-
-	stats->timeout_avg += val;
+	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
 }
 
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
-	int timeout = chan->load_timeout;
-	int took;
-
-	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
-		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
-		return 0;
-	}
-
-	if (chan->stats != NULL)
-		chan->stats->loads++;
-
-	while (--timeout > 0) {
-		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
-			took = chan->load_timeout - timeout;
-
-			s3c2410_dma_stats_timeout(chan->stats, took);
-
-			switch (chan->load_state) {
-			case S3C2410_DMALOAD_1LOADED:
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				break;
-
-			default:
-				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
-			}
-
-			return 1;
-		}
-	}
-
-	if (chan->stats != NULL) {
-		chan->stats->timeout_failed++;
-	}
-
-	return 0;
-}
-
-
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
-		       struct s3c2410_dma_buf *buf)
-{
-	unsigned long reload;
-
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
-	if (buf == NULL) {
-		dmawarn("buffer is NULL\n");
-		return -EINVAL;
-	}
-
-	/* check the state of the channel before we do anything */
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
-	}
-
-	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
-		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
-	}
-
-	/* it would seem sensible if we are the last buffer to not bother
-	 * with the auto-reload bit, so that the DMA engine will not try
-	 * and load another transfer after this one has finished...
-	 */
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		pr_debug("load_state is none, checking for noreload (next=%p)\n",
-			 buf->next);
-		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
-	} else {
-		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
-		reload = S3C2410_DCON_AUTORELOAD;
-	}
-
-	if ((buf->data & 0xf0000000) != 0x30000000) {
-		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
-	}
-
-	writel(buf->data, chan->addr_reg);
-
-	dma_wrreg(chan, S3C2410_DMA_DCON,
-		  chan->dcon | reload | (buf->size/chan->xfer_unit));
-
-	chan->next = buf->next;
-
-	/* update the state of the channel */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_1RUNNING:
-		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
-		break;
-
-	default:
-		dmawarn("dmaload: unknown state %d in loadbuffer\n",
-			chan->load_state);
-		break;
-	}
-
-	return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
-	if (chan->op_fn != NULL) {
-		(chan->op_fn)(chan, op);
-	}
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
-		     enum s3c2410_dma_buffresult result)
-{
-#if 0
-	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
-		 chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
-	if (chan->callback_fn != NULL) {
-		(chan->callback_fn)(chan, buf->id, buf->size, result);
-	}
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
-	unsigned long tmp;
-	unsigned long flags;
-
-	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
-	local_irq_save(flags);
-
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
-		local_irq_restore(flags);
-		return 0;
-	}
-
-	chan->state = S3C2410_DMA_RUNNING;
-
-	/* check wether there is anything to load, and if not, see
-	 * if we can find anything to load
-	 */
-
-	if (chan->load_state == S3C2410_DMALOAD_NONE) {
-		if (chan->next == NULL) {
-			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
-			       chan->number);
-			chan->state = S3C2410_DMA_IDLE;
-			local_irq_restore(flags);
-			return -EINVAL;
-		}
-
-		s3c2410_dma_loadbuffer(chan, chan->next);
-	}
-
-	dbg_showchan(chan);
-
-	/* enable the channel */
-
-	if (!chan->irq_enabled) {
-		enable_irq(chan->irq);
-		chan->irq_enabled = 1;
-	}
-
-	/* start the channel going */
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp &= ~S3C2410_DMASKTRIG_STOP;
-	tmp |= S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
-	/* the dma buffer loads should take care of clearing the AUTO
-	 * reloading feature */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp &= ~S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
-	if (chan->load_state == S3C2410_DMALOAD_NONE ||
-	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
-		return 1;
-
-	return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id         the device driver's id information for this buffer
- * data       the physical address of the buffer data
- * size       the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
-			dma_addr_t data, int size)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-	struct s3c2410_dma_buf *buf;
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __FUNCTION__, id, (unsigned int)data, size);
-
-	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
-	if (buf == NULL) {
-		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __FUNCTION__, (long)sizeof(*buf));
-		return -ENOMEM;
-	}
-
-	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
-	//dbg_showchan(chan);
-
-	buf->next  = NULL;
-	buf->data  = buf->ptr = data;
-	buf->size  = size;
-	buf->id    = id;
-	buf->magic = BUF_MAGIC;
-
-	local_irq_save(flags);
-
-	if (chan->curr == NULL) {
-		/* we've got nothing loaded... */
-		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __FUNCTION__, buf);
-
-		chan->curr = buf;
-		chan->end  = buf;
-		chan->next = NULL;
-	} else {
-		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __FUNCTION__, buf);
-
-		if (chan->end == NULL)
-			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __FUNCTION__, chan);
-
-		chan->end->next = buf;
-		chan->end = buf;
-	}
-
-	/* if necessary, update the next buffer field */
-	if (chan->next == NULL)
-		chan->next = buf;
-
-	/* check to see if we can load a buffer */
-	if (chan->state == S3C2410_DMA_RUNNING) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				printk(KERN_ERR "dma%d: loadbuffer:"
-				       "timeout loading buffer\n",
-				       chan->number);
-				dbg_showchan(chan);
-				local_irq_restore(flags);
-				return -EINVAL;
-			}
-		}
-
-		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	} else if (chan->state == S3C2410_DMA_IDLE) {
-		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
-			s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
-		}
-	}
-
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
-	int magicok = (buf->magic == BUF_MAGIC);
-
-	buf->magic = -1;
-
-	if (magicok) {
-		kmem_cache_free(dma_kmem, buf);
-	} else {
-		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
-	}
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
-	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
-		 chan->number, chan->load_state);
-#endif
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_NONE:
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __FUNCTION__);
-			return;
-		}
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* I belive in this case we do not have anything to do
-		 * until the next buffer comes along, and we turn off the
-		 * reload */
-		return;
-
-	default:
-		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
-			 chan->number, chan->load_state);
-		return;
-
-	}
-
-	/* hopefully this'll shut the damned thing up after the transfer... */
-	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
-	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
-	struct s3c2410_dma_buf  *buf;
-
-	buf = chan->curr;
-
-	dbg_showchan(chan);
-
-	/* modify the channel state */
-
-	switch (chan->load_state) {
-	case S3C2410_DMALOAD_1RUNNING:
-		/* TODO - if we are running only one buffer, we probably
-		 * want to reload here, and then worry about the buffer
-		 * callback */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED:
-		/* iirc, we should go back to NONE loaded here, we
-		 * had a buffer, and it was never verified as being
-		 * loaded.
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_NONE;
-		break;
-
-	case S3C2410_DMALOAD_1LOADED_1RUNNING:
-		/* we'll worry about checking to see if another buffer is
-		 * ready after we've called back the owner. This should
-		 * ensure we do not wait around too long for the DMA
-		 * engine to start the next transfer
-		 */
-
-		chan->load_state = S3C2410_DMALOAD_1LOADED;
-		break;
-
-	case S3C2410_DMALOAD_NONE:
-		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
-		       chan->number);
-		break;
-
-	default:
-		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
-		       chan->number, chan->load_state);
-		break;
-	}
-
-	if (buf != NULL) {
-		/* update the chain to make sure that if we load any more
-		 * buffers when we call the callback function, things should
-		 * work properly */
-
-		chan->curr = buf->next;
-		buf->next  = NULL;
-
-		if (buf->magic != BUF_MAGIC) {
-			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __FUNCTION__, buf);
-			return IRQ_HANDLED;
-		}
-
-		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
-		/* free resouces */
-		s3c2410_dma_freebuf(buf);
-	} else {
-	}
-
-	/* only reload if the channel is still running... our buffer done
-	 * routine may have altered the state by requesting the dma channel
-	 * to stop or shutdown... */
-
-	/* todo: check that when the channel is shut-down from inside this
-	 * function, we cope with unsetting reload, etc */
-
-	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
-		unsigned long flags;
-
-		switch (chan->load_state) {
-		case S3C2410_DMALOAD_1RUNNING:
-			/* don't need to do anything for this state */
-			break;
-
-		case S3C2410_DMALOAD_NONE:
-			/* can load buffer immediately */
-			break;
-
-		case S3C2410_DMALOAD_1LOADED:
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				/* flag error? */
-				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __FUNCTION__);
-				return IRQ_HANDLED;
-			}
-
-			break;
-
-		case S3C2410_DMALOAD_1LOADED_1RUNNING:
-			goto no_load;
-
-		default:
-			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
-			       chan->number, chan->load_state);
-			return IRQ_HANDLED;
-		}
-
-		local_irq_save(flags);
-		s3c2410_dma_loadbuffer(chan, chan->next);
-		local_irq_restore(flags);
-	} else {
-		s3c2410_dma_lastxfer(chan);
-
-		/* see if we can stop this channel.. */
-		if (chan->load_state == S3C2410_DMALOAD_NONE) {
-			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
-				 chan->number, jiffies);
-			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
-					 S3C2410_DMAOP_STOP);
-		}
-	}
-
- no_load:
-	return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
-			struct s3c2410_dma_client *client,
-			void *dev)
-{
-	struct s3c2410_dma_chan *chan;
-	unsigned long flags;
-	int err;
-
-	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
-		 channel, client->name, dev);
-
-	local_irq_save(flags);
-
-	chan = s3c2410_dma_map_channel(channel);
-	if (chan == NULL) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-
-	dbg_showchan(chan);
-
-	chan->client = client;
-	chan->in_use = 1;
-
-	if (!chan->irq_claimed) {
-		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __FUNCTION__, chan->irq);
-
-		chan->irq_claimed = 1;
-		local_irq_restore(flags);
-
-		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
-				  client->name, (void *)chan);
-
-		local_irq_save(flags);
-
-		if (err) {
-			chan->in_use = 0;
-			chan->irq_claimed = 0;
-			local_irq_restore(flags);
-
-			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
-			       client->name, chan->irq, chan->number);
-			return err;
-		}
-
-		chan->irq_enabled = 1;
-	}
-
-	local_irq_restore(flags);
-
-	/* need to setup */
-
-	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+	.select		= s3c2410_dma_select,
+	.dcon_mask	= 7 << 24,
+	.map		= s3c2410_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
+};
 
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
+static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
+	.channels	= {
+		[DMACH_SDI]	= {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+				[2]	= 0 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_IN]	= {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+	},
+};
 
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+static int s3c2410_dma_add(struct sys_device *sysdev)
 {
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-	unsigned long flags;
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	if (chan->client != client) {
-		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
-		       channel, chan->client, client);
-	}
-
-	/* sort out stopping and freeing the channel */
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: need to stop dma channel %p\n",
-		       __FUNCTION__, chan);
-
-		/* possibly flush the channel */
-		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
-	}
-
-	chan->client = NULL;
-	chan->in_use = 0;
-
-	if (chan->irq_claimed)
-		free_irq(chan->irq, (void *)chan);
-
-	chan->irq_claimed = 0;
-
-	if (!(channel & DMACH_LOW_LEVEL))
-		dma_chan_map[channel] = NULL;
-
-	local_irq_restore(flags);
-
-	return 0;
+	s3c2410_dma_init();
+	s3c24xx_dma_order_set(&s3c2410_dma_order);
+	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
 }
 
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-	unsigned long tmp;
-
-	pr_debug("%s:\n", __FUNCTION__);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
-
-	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-	tmp |= S3C2410_DMASKTRIG_STOP;
-	//tmp &= ~S3C2410_DMASKTRIG_ON;
-	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-	tmp |= S3C2410_DCON_NORELOAD;
-	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
-	/* should stop do this, or should we wait for flush? */
-	chan->state      = S3C2410_DMA_IDLE;
-	chan->load_state = S3C2410_DMALOAD_NONE;
-
-	local_irq_restore(flags);
-
-	return 0;
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
 
-void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+static int __init s3c2410_dma_drvinit(void)
 {
-	unsigned long tmp;
-	unsigned int timeout = 0x10000;
-
-	while (timeout-- > 0) {
-		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
-		if (!(tmp & S3C2410_DMASKTRIG_ON))
-			return;
-	}
-
-	pr_debug("dma%d: failed to stop?\n", chan->number);
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
 }
 
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
-	struct s3c2410_dma_buf *buf, *next;
-	unsigned long flags;
-
-	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
-
-	dbg_showchan(chan);
-
-	local_irq_save(flags);
-
-	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
-		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
-	}
-
-	buf = chan->curr;
-	if (buf == NULL)
-		buf = chan->next;
-
-	chan->curr = chan->next = chan->end = NULL;
-
-	if (buf != NULL) {
-		for ( ; buf != NULL; buf = next) {
-			next = buf->next;
-
-			pr_debug("%s: free buffer %p, next %p\n",
-			       __FUNCTION__, buf, buf->next);
-
-			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
-			s3c2410_dma_freebuf(buf);
-		}
-	}
-
-	dbg_showregs(chan);
-
-	s3c2410_dma_waitforstop(chan);
-
-#if 0
-	/* should also clear interrupts, according to WinCE BSP */
-	{
-		unsigned long tmp;
-
-		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
-		tmp |= S3C2410_DCON_NORELOAD;
-		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-	}
+arch_initcall(s3c2410_dma_drvinit);
 #endif
 
-	dbg_showregs(chan);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-int
-s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	dbg_showchan(chan);
-
-	/* if we've only loaded one buffer onto the channel, then chec
-	 * to see if we have another, and if so, try and load it so when
-	 * the first buffer is finished, the new one will be loaded onto
-	 * the channel */
-
-	if (chan->next != NULL) {
-		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
-			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
-				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
-			} else {
-				chan->load_state = S3C2410_DMALOAD_1RUNNING;
-				s3c2410_dma_loadbuffer(chan, chan->next);
-			}
-
-		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
-			s3c2410_dma_loadbuffer(chan, chan->next);
-		}
-	}
-
-
-	local_irq_restore(flags);
-
-	return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	switch (op) {
-	case S3C2410_DMAOP_START:
-		return s3c2410_dma_start(chan);
-
-	case S3C2410_DMAOP_STOP:
-		return s3c2410_dma_dostop(chan);
-
-	case S3C2410_DMAOP_PAUSE:
-	case S3C2410_DMAOP_RESUME:
-		return -ENOENT;
-
-	case S3C2410_DMAOP_FLUSH:
-		return s3c2410_dma_flush(chan);
-
-	case S3C2410_DMAOP_STARTED:
-		return s3c2410_dma_started(chan);
-
-	case S3C2410_DMAOP_TIMEOUT:
-		return 0;
-
-	}
-
-	return -ENOENT;      /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC  -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST  -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize:     size of unit in bytes (1,2,4)
- * dcon:         base value of the DCONx register
-*/
-
-int s3c2410_dma_config(dmach_t channel,
-		       int xferunit,
-		       int dcon)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __FUNCTION__, channel, xferunit, dcon);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
-
-	dcon |= chan->dcon & dma_sel.dcon_mask;
-
-	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
-
-	switch (xferunit) {
-	case 1:
-		dcon |= S3C2410_DCON_BYTE;
-		break;
-
-	case 2:
-		dcon |= S3C2410_DCON_HALFWORD;
-		break;
-
-	case 4:
-		dcon |= S3C2410_DCON_WORD;
-		break;
-
-	default:
-		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
-		return -EINVAL;
-	}
-
-	dcon |= S3C2410_DCON_HWTRIG;
-	dcon |= S3C2410_DCON_INTREQ;
-
-	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
-
-	chan->dcon = dcon;
-	chan->xfer_unit = xferunit;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
-
-	chan->flags = flags;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
-
-	chan->op_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
-
-	chan->callback_fn = rtn;
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source:    S3C2410_DMASRC_HW: source is hardware
- *            S3C2410_DMASRC_MEM: source is memory
- *
- * hwcfg:     the value for xxxSTCn register,
- *            bit 0: 0=increment pointer, 1=leave pointer
- *            bit 1: 0=soucre is AHB, 1=soucre is APB
- *
- * devaddr:   physical address of the source
-*/
-
-int s3c2410_dma_devconfig(int channel,
-			  enum s3c2410_dmasrc source,
-			  int hwcfg,
-			  unsigned long devaddr)
-{
-	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __FUNCTION__, (int)source, hwcfg, devaddr);
-
-	chan->source = source;
-	chan->dev_addr = devaddr;
-
-	switch (source) {
-	case S3C2410_DMASRC_HW:
-		/* source is hardware */
-		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __FUNCTION__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
-		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
-		return 0;
-
-	case S3C2410_DMASRC_MEM:
-		/* source is memory */
-		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			  __FUNCTION__, devaddr, hwcfg);
-		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
-		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
-		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
-		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
-		return 0;
-	}
-
-	printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
-{
- 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
-	if (chan == NULL)
-		return -EINVAL;
-
-	if (src != NULL)
- 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- 	if (dst != NULL)
- 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- 	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-
-/* system device class */
-
-#ifdef CONFIG_PM
-
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
-{
-	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
-
-	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
-	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
-		/* the dma channel is still working, which is probably
-		 * a bad thing to do over suspend/resume. We stop the
-		 * channel and assume that the client is either going to
-		 * retry after resume, or that it is broken.
-		 */
-
-		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
-		       cp->number);
-
-		s3c2410_dma_dostop(cp);
-	}
-
-	return 0;
-}
-
-static int s3c2410_dma_resume(struct sys_device *dev)
-{
-	return 0;
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume  NULL
-#endif /* CONFIG_PM */
-
-struct sysdev_class dma_sysclass = {
-	set_kset_name("s3c24xx-dma"),
-	.suspend	= s3c2410_dma_suspend,
-	.resume		= s3c2410_dma_resume,
+#if defined(CONFIG_CPU_S3C2442)
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+static struct sysdev_driver s3c2442_dma_driver = {
+	.add	= s3c2410_dma_add,
 };
 
-/* kmem cache implementation */
-
-static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
-{
-	memset(p, 0, sizeof(struct s3c2410_dma_buf));
-}
-
-/* initialisation code */
-
-static int __init s3c2410_init_dma(void)
-{
-	struct s3c2410_dma_chan *cp;
-	int channel;
-	int ret;
-
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
-
-	dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
-	if (dma_base == NULL) {
-		printk(KERN_ERR "dma failed to remap register block\n");
-		return -ENOMEM;
-	}
-
-	printk("Registering sysclass\n");
-
-	ret = sysdev_class_register(&dma_sysclass);
-	if (ret != 0) {
-		printk(KERN_ERR "dma sysclass registration failed\n");
-		goto err;
-	}
-
-	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
-				     SLAB_HWCACHE_ALIGN,
-				     s3c2410_dma_cache_ctor, NULL);
-
-	if (dma_kmem == NULL) {
-		printk(KERN_ERR "dma failed to make kmem cache\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
-		cp = &s3c2410_chans[channel];
-
-		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
-		/* dma channel irqs are in order.. */
-		cp->number = channel;
-		cp->irq    = channel + IRQ_DMA0;
-		cp->regs   = dma_base + (channel*0x40);
-
-		/* point current stats somewhere */
-		cp->stats  = &cp->stats_store;
-		cp->stats_store.timeout_shortest = LONG_MAX;
-
-		/* basic channel configuration */
-
-		cp->load_timeout = 1<<18;
-
-		/* register system device */
-
-		cp->dev.cls = &dma_sysclass;
-		cp->dev.id  = channel;
-		ret = sysdev_register(&cp->dev);
-
-		printk("DMA channel %d at %p, irq %d\n",
-		       cp->number, cp->regs, cp->irq);
-	}
-
-	return 0;
-
- err:
-	kmem_cache_destroy(dma_kmem);
-	iounmap(dma_base);
-	dma_base = NULL;
-	return ret;
-}
-
-core_initcall(s3c2410_init_dma);
-
-static inline int is_channel_valid(unsigned int channel)
+static int __init s3c2442_dma_drvinit(void)
 {
-	return (channel & DMA_CH_VALID);
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
 }
 
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * currently this code uses first-free channel from the specified harware
- * map, not taking into account anything that the board setup code may
- * have to say about the likely peripheral set to be in use.
-*/
-
-struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
-	struct s3c24xx_dma_map *ch_map;
-	struct s3c2410_dma_chan *dmach;
-	int ch;
-
-	if (dma_sel.map == NULL || channel > dma_sel.map_size)
-		return NULL;
-
-	ch_map = dma_sel.map + channel;
-
-	for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
-		if (!is_channel_valid(ch_map->channels[ch]))
-			continue;
-
-		if (s3c2410_chans[ch].in_use == 0) {
-			printk("mapped channel %d to %d\n", channel, ch);
-			break;
-		}
-	}
-
-	if (ch >= S3C2410_DMA_CHANNELS)
-		return NULL;
-
-	/* update our channel mapping */
-
-	dmach = &s3c2410_chans[ch];
-	dma_chan_map[channel] = dmach;
-
-	/* select the channel */
-
-	(dma_sel.select)(dmach, ch_map);
-
-	return dmach;
-}
-
-static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
-{
-	/* show the channel configuration */
-
-	printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
-	       (is_channel_valid(map->channels[0]) ? '0' : '-'),
-	       (is_channel_valid(map->channels[1]) ? '1' : '-'),
-	       (is_channel_valid(map->channels[2]) ? '2' : '-'),
-	       (is_channel_valid(map->channels[3]) ? '3' : '-'));
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
-	if (1)
-		s3c24xx_dma_show_ch(map, ch);
-
-	return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
-	struct s3c24xx_dma_map *nmap;
-	size_t map_sz = sizeof(*nmap) * sel->map_size;
-	int ptr;
-
-	nmap = kmalloc(map_sz, GFP_KERNEL);
-	if (nmap == NULL)
-		return -ENOMEM;
-
-	memcpy(nmap, sel->map, map_sz);
-	memcpy(&dma_sel, sel, sizeof(*sel));
-
-	dma_sel.map = nmap;
-
-	for (ptr = 0; ptr < sel->map_size; ptr++)
-		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+arch_initcall(s3c2442_dma_drvinit);
+#endif
 
-	return 0;
-}
diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h
deleted file mode 100644
index 0ebfe0aab80b..000000000000
--- a/arch/arm/mach-s3c2410/dma.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/mach-s3c2410/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID		(1<<31)
-
-struct s3c24xx_dma_addr {
-	unsigned long		from;
-	unsigned long		to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
-	const char		*name;
-	struct s3c24xx_dma_addr  hw_addr;
-
-	unsigned long		 channels[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
-	struct s3c24xx_dma_map	*map;
-	unsigned long		 map_size;
-	unsigned long		 dcon_mask;
-
-	void	(*select)(struct s3c2410_dma_chan *chan,
-			  struct s3c24xx_dma_map *map);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index f6fb215bb48c..01e795d1146e 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -1,9 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/gpio.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX GPIO support
+ * S3C2410 GPIO support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,8 +18,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
+ */
 
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -33,156 +32,40 @@
 
 #include <asm/arch/regs-gpio.h>
 
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long mask;
-	unsigned long con;
-	unsigned long flags;
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		mask = 1 << S3C2410_GPIO_OFFSET(pin);
-	} else {
-		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
-	}
-
-	switch (function) {
-	case S3C2410_GPIO_LEAVE:
-		mask = 0;
-		function = 0;
-		break;
-
-	case S3C2410_GPIO_INPUT:
-	case S3C2410_GPIO_OUTPUT:
-	case S3C2410_GPIO_SFN2:
-	case S3C2410_GPIO_SFN3:
-		if (pin < S3C2410_GPIO_BANKB) {
-			function -= 1;
-			function &= 1;
-			function <<= S3C2410_GPIO_OFFSET(pin);
-		} else {
-			function &= 3;
-			function <<= S3C2410_GPIO_OFFSET(pin)*2;
-		}
-	}
-
-	/* modify the specified register wwith IRQs off */
-
-	local_irq_save(flags);
-
-	con  = __raw_readl(base + 0x00);
-	con &= ~mask;
-	con |= function;
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long val = __raw_readl(base);
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		val >>= S3C2410_GPIO_OFFSET(pin);
-		val &= 1;
-		val += 1;
-	} else {
-		val >>= S3C2410_GPIO_OFFSET(pin)*2;
-		val &= 3;
-	}
-
-	return val | S3C2410_GPIO_INPUT;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+			   unsigned int config)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	void __iomem *reg = S3C24XX_EINFLT0;
 	unsigned long flags;
-	unsigned long up;
-
-	if (pin < S3C2410_GPIO_BANKB)
-		return;
-
-	local_irq_save(flags);
-
-	up = __raw_readl(base + 0x08);
-	up &= ~(1L << offs);
-	up |= to << offs;
-	__raw_writel(up, base + 0x08);
+	unsigned long val;
 
-	local_irq_restore(flags);
-}
+	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+		return -1;
 
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
+	config &= 0xff;
 
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long dat;
+	pin -= S3C2410_GPG8;
+	reg += pin & ~3;
 
 	local_irq_save(flags);
 
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offs);
-	dat |= to << offs;
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	/* update filter width and clock source */
 
-	return __raw_readl(base + 0x04) & (1<< offs);
-}
+	val = __raw_readl(reg);
+	val &= ~(0xff << ((pin & 3) * 8));
+	val |= config << ((pin & 3) * 8);
+	__raw_writel(val, reg);
 
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
+	/* update filter enable */
 
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
+	val = __raw_readl(S3C24XX_EXTINT2);
+	val &= ~(1 << ((pin * 4) + 3));
+	val |= on << ((pin * 4) + 3);
+	__raw_writel(val, S3C24XX_EXTINT2);
 
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
 	local_irq_restore(flags);
 
-	return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
-
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return 0;
 }
 
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
+EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 3c0ed7871c55..53cbdaa43ac6 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,37 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *
- *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
- *                Fixed compile warnings
- *
- *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
- *                Fixed s3c_extirq_type
- *
- *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- *                Addition of ADC/TC demux
- *
- *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
- *		  Fix for set_irq_type() on low EINT numbers
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Tidy up KF's patch and sort out new release
- *
- *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
- *		  Add support for power management controls
- *
- *   04-Nov-2004  Ben Dooks
- *		  Fix standard IRQ wake for EINT0..4 and RTC
- *
- *   22-Feb-2005  Ben Dooks
- *		  Fixed edge-triggering on ADC IRQ
- *
- *   28-Jun-2005  Ben Dooks
- *		  Mark IRQ_LCD valid
- *
- *   25-Jul-2005  Ben Dooks
- *		  Split the S3C2440 IRQ code to seperate file
 */
 
 #include <linux/init.h>
@@ -57,745 +26,23 @@
 #include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask	= 0xffffffffL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
-	unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
-	if (!(s3c_irqwake_eintallow & bit))
-		return -ENOENT;
-
-	printk(KERN_INFO "wake %s for irq %d\n",
-	       state ? "enabled" : "disabled", irqno);
-
-	if (!state)
-		s3c_irqwake_eintmask |= bit;
-	else
-		s3c_irqwake_eintmask &= ~bit;
-
-	return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
-static void
-s3c_irq_mask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask |= 1UL << irqno;
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(unsigned int irqno)
-{
-	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-	unsigned long mask;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	__raw_writel(mask|bitval, S3C2410_INTMSK);
-
-	__raw_writel(bitval, S3C2410_SRCPND);
-	__raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
-		irqdbf2("s3c_irq_unmask %d\n", irqno);
-
-	irqno -= IRQ_EINT0;
-
-	mask = __raw_readl(S3C2410_INTMSK);
-	mask &= ~(1UL << irqno);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.ack		= s3c_irq_maskack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(unsigned int irqno)
-{
-	unsigned long mask;
-
-	irqno -= EXTINT_OFF;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask |= ( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(unsigned int irqno)
-{
-	unsigned long req;
-	unsigned long bit;
-	unsigned long mask;
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
-	bit = 1UL << (irqno - EXTINT_OFF);
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-
-	__raw_writel(bit, S3C24XX_EINTPEND);
-
-	req = __raw_readl(S3C24XX_EINTPEND);
-	req &= ~mask;
-
-	/* not sure if we should be acking the parent irq... */
-
-	if (irqno <= IRQ_EINT7 ) {
-		if ((req & 0xf0) == 0)
-			s3c_irq_ack(IRQ_EINT4t7);
-	} else {
-		if ((req >> 8) == 0)
-			s3c_irq_ack(IRQ_EINT8t23);
-	}
-}
-
-static void
-s3c_irqext_unmask(unsigned int irqno)
+static int s3c2410_irq_add(struct sys_device *sysdev)
 {
-	unsigned long mask;
-
-	irqno -= EXTINT_OFF;
-
-	mask = __raw_readl(S3C24XX_EINTMASK);
-	mask &= ~( 1UL << irqno);
-	__raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(unsigned int irq, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-	unsigned long newvalue = 0, value;
-
-	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
-	{
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - IRQ_EINT0) * 2;
-		extint_offset = (irq - IRQ_EINT0) * 4;
-	}
-	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
-	{
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
-		extint_offset = (irq - (EXTINT_OFF)) * 4;
-	}
-	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
-	{
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT8) * 4;
-	}
-	else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
-	{
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (irq - IRQ_EINT8) * 2;
-		extint_offset = (irq - IRQ_EINT16) * 4;
-	} else
-		return -1;
-
-	/* Set the GPIO to external interrupt mode */
-	value = __raw_readl(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	__raw_writel(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQT_NOEDGE:
-			printk(KERN_WARNING "No edge setting!\n");
-			break;
-
-		case IRQT_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQT_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQT_BOTHEDGE:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQT_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQT_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			printk(KERN_ERR "No such irq type %d", type);
-			return -1;
-	}
-
-	value = __raw_readl(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	__raw_writel(value, extint_reg);
-
 	return 0;
 }
 
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.mask		= s3c_irqext_mask,
-	.unmask		= s3c_irqext_unmask,
-	.ack		= s3c_irqext_ack,
-	.set_type	= s3c_irqext_type,
-	.set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.ack		= s3c_irq_ack,
-	.mask		= s3c_irq_mask,
-	.unmask		= s3c_irq_unmask,
-	.set_wake	= s3c_irq_wake,
-	.set_type	= s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
-	.name		= "s3c-uart0",
-	.mask		= s3c_irq_uart0_mask,
-	.unmask		= s3c_irq_uart0_unmask,
-	.ack		= s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
-	.name		= "s3c-uart1",
-	.mask		= s3c_irq_uart1_mask,
-	.unmask		= s3c_irq_uart1_unmask,
-	.ack		= s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
-	.name		= "s3c-uart2",
-	.mask		= s3c_irq_uart2_mask,
-	.unmask		= s3c_irq_uart2_unmask,
-	.ack		= s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(unsigned int irqno)
-{
-	s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
-	.name		= "s3c-adc",
-	.mask		= s3c_irq_adc_mask,
-	.unmask		= s3c_irq_adc_unmask,
-	.ack		= s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = 9;
-	struct irq_desc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_TC;
-			desc_handle_irq(IRQ_TC, mydesc);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_ADC;
-			desc_handle_irq(IRQ_ADC, mydesc);
-		}
-	}
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
-	unsigned int subsrc, submsk;
-	unsigned int offset = start - IRQ_S3CUART_RX0;
-	struct irq_desc *desc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
-		start, offset, subsrc, submsk);
-
-	subsrc &= ~submsk;
-	subsrc >>= offset;
-	subsrc &= 7;
-
-	if (subsrc != 0) {
-		desc = irq_desc + start;
-
-		if (subsrc & 1)
-			desc_handle_irq(start, desc);
-
-		desc++;
-
-		if (subsrc & 2)
-			desc_handle_irq(start+1, desc);
-
-		desc++;
-
-		if (subsrc & 4)
-			desc_handle_irq(start+2, desc);
-	}
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
-		    struct irq_desc *desc)
-{
-	irq = irq;
-	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
-		      struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= ~0xff;	/* ignore lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-		desc_handle_irq(irq, irq_desc + irq);
-	}
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
-			struct irq_desc *desc)
-{
-	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-	eintpnd &= ~eintmsk;
-	eintpnd &= 0xff;	/* only lower irqs */
-
-	/* we may as well handle all the pending IRQs here */
-
-	while (eintpnd) {
-		irq = __ffs(eintpnd);
-		eintpnd &= ~(1<<irq);
-
-		irq += (IRQ_EINT4 - 4);
-
-		desc_handle_irq(irq, irq_desc + irq);
-	}
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
+static struct sysdev_driver s3c2410_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+static int s3c2410_irq_init(void)
 {
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
-	unsigned long pend;
-	unsigned long last;
-	int irqno;
-	int i;
-
-	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
-	/* first, clear all interrupts pending... */
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C24XX_EINTPEND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C24XX_EINTPEND);
-		printk("irq: clearing pending ext status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_INTPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		__raw_writel(pend, S3C2410_SRCPND);
-		__raw_writel(pend, S3C2410_INTPND);
-		printk("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = __raw_readl(S3C2410_SUBSRCPND);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		printk("irq: clearing subpending status %08x\n", (int)pend);
-		__raw_writel(pend, S3C2410_SUBSRCPND);
-		last = pend;
-	}
-
-	/* register the main interrupts */
-
-	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
-	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
-		/* set all the s3c2410 internal irqs */
-
-		switch (irqno) {
-			/* deal with the special IRQs (cascaded) */
-
-		case IRQ_EINT4t7:
-		case IRQ_EINT8t23:
-		case IRQ_UART0:
-		case IRQ_UART1:
-		case IRQ_UART2:
-		case IRQ_ADCPARENT:
-			set_irq_chip(irqno, &s3c_irq_level_chip);
-			set_irq_handler(irqno, handle_level_irq);
-			break;
-
-		case IRQ_RESERVED6:
-		case IRQ_RESERVED24:
-			/* no IRQ here */
-			break;
-
-		default:
-			//irqdbf("registering irq %d (s3c irq)\n", irqno);
-			set_irq_chip(irqno, &s3c_irq_chip);
-			set_irq_handler(irqno, handle_edge_irq);
-			set_irq_flags(irqno, IRQF_VALID);
-		}
-	}
-
-	/* setup the cascade irq handlers */
-
-	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
-	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
-	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
-	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
-	set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
-	set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
-	/* external interrupts */
-
-	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-		irqdbf("registering irq %d (ext int)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_eint0t4);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
-		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irqext_chip);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* register the uart interrupts */
-
-	irqdbf("s3c2410: registering external interrupts\n");
-
-	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
-		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart0);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
-		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart1);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
-		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_uart2);
-		set_irq_handler(irqno, handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
-		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
-		set_irq_chip(irqno, &s3c_irq_adc);
-		set_irq_handler(irqno, handle_edge_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	irqdbf("s3c2410: registered interrupt handlers\n");
-}
+arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
deleted file mode 100644
index e5913da3b919..000000000000
--- a/arch/arm/mach-s3c2410/irq.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* arch/arm/mach-s3c2410/irq.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
-
-extern struct irq_chip s3c_irq_level_chip;
-
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-/* exported for use in arch/arm/mach-s3c2410 */
-
-#ifdef CONFIG_PM
-extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
-#else
-#define s3c_irq_wake NULL
-#endif
-
-extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 817e2c684410..72f2cc4fcd03 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
  *
  * linux/arch/arm/mach-s3c2410/mach-amlm5900.c
  *
@@ -35,7 +35,7 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
-
+#include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -52,8 +52,8 @@
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
@@ -113,12 +113,6 @@ static struct platform_device amlm5900_device_nor = {
 #endif
 
 static struct map_desc amlm5900_iodesc[] __initdata = {
-	{
-		.virtual	= (u32)S3C24XX_VA_SPI,
-		.pfn		= __phys_to_pfn(S3C2410_PA_SPI),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	}
 };
 
 #define UCON S3C2410_UCON_DEFAULT
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index b8b76757ec54..7b81296427eb 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -50,9 +50,9 @@
 
 #include <linux/serial_8250.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 #include "usb-simtec.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 15b625eae499..d052ab2d9377 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,23 +25,24 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
 
 #include <asm/arch/h1940.h>
 #include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
+#include <asm/arch/udc.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -102,6 +103,32 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
 
 EXPORT_SYMBOL_GPL(h1940_latch_control);
 
+static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+	switch (cmd)
+	{
+		case S3C2410_UDC_P_ENABLE :
+			h1940_latch_control(0, H1940_LATCH_USB_DP);
+			break;
+		case S3C2410_UDC_P_DISABLE :
+			h1940_latch_control(H1940_LATCH_USB_DP, 0);
+			break;
+		case S3C2410_UDC_P_RESET :
+			break;
+		default:
+			break;
+	}
+}
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+	.udc_command		= h1940_udc_pullup,
+	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin_inverted	= 1,
+};
+
+
 
 /**
  * Set lcd on or off
@@ -146,12 +173,19 @@ static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
 	.bpp=		{16,16,16},
 };
 
+static struct platform_device s3c_device_leds = {
+	.name             = "h1940-leds",
+	.id               = -1,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c,
 	&s3c_device_iis,
+	&s3c_device_usbgadget,
+	&s3c_device_leds,
 };
 
 static struct s3c24xx_board h1940_board __initdata = {
@@ -168,7 +202,9 @@ static void __init h1940_map_io(void)
 
 	/* setup PM */
 
+#ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
 	s3c2410_pm_init();
 }
 
@@ -179,7 +215,23 @@ static void __init h1940_init_irq(void)
 
 static void __init h1940_init(void)
 {
+	u32 tmp;
+
 	s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ 	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	tmp = (
+		 0x78 << S3C2410_PLLCON_MDIVSHIFT)
+	      | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
+	      | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+	writel(tmp, S3C2410_UPLLCON);
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
@@ -189,6 +241,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= h1940_map_io,
 	.init_irq	= h1940_init_irq,
-	.init_machine   = h1940_init,
+	.init_machine	= h1940_init,
 	.timer		= &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0411e9adb54d..261aa4cc0770 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -29,7 +29,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -38,10 +37,10 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/iic.h>
 
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct map_desc n30_iodesc[] __initdata = {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 2c738b375e4d..c78ab75b44f3 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -32,10 +32,10 @@
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
new file mode 100644
index 000000000000..c6a41593de21
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -0,0 +1,448 @@
+/* linux/arch/arm/mach-s3c2410/mach-qt2410.c
+ *
+ * Copyright (C) 2006 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/mmc/protocol.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/spi-gpio.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+/* LCD driver info */
+
+/* Configuration for 640x480 SHARP LQ080V3DG01 */
+static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x01),	/* HCLK/4 */
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(18) |	/* 19 */
+				  S3C2410_LCDCON2_LINEVAL(479) |
+				  S3C2410_LCDCON2_VFPD(10) |	/* 11 */
+				  S3C2410_LCDCON2_VSPW(14),	/* 15 */
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(43) |	/* 44 */
+				  S3C2410_LCDCON3_HOZVAL(639) |	/* 640 */
+				  S3C2410_LCDCON3_HFPD(115),	/* 116 */
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(95),	/* 96 */
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 640,
+	.height		= 480,
+
+	.xres		= {
+		.min	= 640,
+		.max	= 640,
+		.defval	= 640,
+	},
+
+	.yres		= {
+		.min	= 480,
+		.max	= 480,
+		.defval = 480,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+/* Configuration for 480x640 toppoly TD028TTEC1 */
+static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x01),	/* HCLK/4 */
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(1) |	/* 2 */
+				  S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
+				  S3C2410_LCDCON2_VFPD(3) |	/* 4 */
+				  S3C2410_LCDCON2_VSPW(1),	/* 2 */
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(7) |	/* 8 */
+				  S3C2410_LCDCON3_HOZVAL(479) |	/* 479 */
+				  S3C2410_LCDCON3_HFPD(23),	/* 24 */
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(7),	/* 8 */
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 480,
+	.height		= 640,
+
+	.xres		= {
+		.min	= 480,
+		.max	= 480,
+		.defval	= 480,
+	},
+
+	.yres		= {
+		.min	= 640,
+		.max	= 640,
+		.defval = 640,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+/* Config for 240x320 LCD */
+static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = {
+	.regs	= {
+
+		.lcdcon1	= S3C2410_LCDCON1_TFT16BPP |
+				  S3C2410_LCDCON1_TFT |
+				  S3C2410_LCDCON1_CLKVAL(0x04),
+
+		.lcdcon2	= S3C2410_LCDCON2_VBPD(1) |
+				  S3C2410_LCDCON2_LINEVAL(319) |
+				  S3C2410_LCDCON2_VFPD(6) |
+				  S3C2410_LCDCON2_VSPW(3),
+
+		.lcdcon3	= S3C2410_LCDCON3_HBPD(12) |
+				  S3C2410_LCDCON3_HOZVAL(239) |
+				  S3C2410_LCDCON3_HFPD(7),
+
+		.lcdcon4	= S3C2410_LCDCON4_MVAL(0) |
+				  S3C2410_LCDCON4_HSPW(3),
+
+		.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+				  S3C2410_LCDCON5_INVVLINE |
+				  S3C2410_LCDCON5_INVVFRAME |
+				  S3C2410_LCDCON5_PWREN |
+				  S3C2410_LCDCON5_HWSWP,
+	},
+
+	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+
+	.width		= 240,
+	.height		= 320,
+
+	.xres		= {
+		.min	= 240,
+		.max	= 240,
+		.defval	= 240,
+	},
+
+	.yres		= {
+		.min	= 320,
+		.max	= 320,
+		.defval = 320,
+	},
+
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval = 16,
+	},
+};
+
+/* CS8900 */
+
+static struct resource qt2410_cs89x0_resources[] = {
+	[0] = {
+		.start	= 0x19000000,
+		.end	= 0x19000000 + 16,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EINT9,
+		.end	= IRQ_EINT9,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device qt2410_cs89x0 = {
+	.name		= "cirrus-cs89x0",
+	.num_resources	= ARRAY_SIZE(qt2410_cs89x0_resources),
+	.resource	= qt2410_cs89x0_resources,
+};
+
+/* LED */
+
+static struct s3c24xx_led_platdata qt2410_pdata_led = {
+	.gpio		= S3C2410_GPB0,
+	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.name		= "led",
+	.def_trigger	= "timer",
+};
+
+static struct platform_device qt2410_led = {
+	.name		= "s3c24xx_led",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &qt2410_pdata_led,
+	},
+};
+
+/* SPI */
+
+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
+{
+	switch (cs) {
+	case BITBANG_CS_ACTIVE:
+		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		break;
+	case BITBANG_CS_INACTIVE:
+		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		break;
+	}
+}
+
+static struct s3c2410_spigpio_info spi_gpio_cfg = {
+	.pin_clk	= S3C2410_GPG7,
+	.pin_mosi	= S3C2410_GPG6,
+	.pin_miso	= S3C2410_GPG5,
+	.chip_select	= &spi_gpio_cs,
+};
+
+
+static struct platform_device qt2410_spi = {
+	.name		  = "s3c24xx-spi-gpio",
+	.id		  = 1,
+	.dev = {
+		.platform_data = &spi_gpio_cfg,
+	},
+};
+
+/* Board devices */
+
+static struct platform_device *qt2410_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_iis,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&qt2410_spi,
+	&qt2410_cs89x0,
+	&qt2410_led,
+};
+
+static struct s3c24xx_board qt2410_board __initdata = {
+	.devices       = qt2410_devices,
+	.devices_count = ARRAY_SIZE(qt2410_devices)
+};
+
+static struct mtd_partition qt2410_nand_part[] = {
+	[0] = {
+		.name	= "U-Boot",
+		.size	= 0x30000,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "U-Boot environment",
+		.offset = 0x30000,
+		.size	= 0x4000,
+	},
+	[2] = {
+		.name	= "kernel",
+		.offset = 0x34000,
+		.size	= SZ_2M,
+	},
+	[3] = {
+		.name	= "initrd",
+		.offset	= 0x234000,
+		.size	= SZ_4M,
+	},
+	[4] = {
+		.name	= "jffs2",
+		.offset = 0x634000,
+		.size	= 0x39cc000,
+	},
+};
+
+static struct s3c2410_nand_set qt2410_nand_sets[] = {
+	[0] = {
+		.name		= "NAND",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(qt2410_nand_part),
+		.partitions	= qt2410_nand_part,
+	},
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand qt2410_nand_info = {
+	.tacls		= 20,
+	.twrph0		= 60,
+	.twrph1		= 20,
+	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
+	.sets		= qt2410_nand_sets,
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+	tft_type = str[0];
+	return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+	s3c24xx_init_clocks(12*1000*1000);
+	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+	s3c24xx_set_board(&qt2410_board);
+}
+
+static void __init qt2410_machine_init(void)
+{
+	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+
+	switch (tft_type) {
+	case 'p': /* production */
+		s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg);
+		break;
+	case 'b': /* big */
+		s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg);
+		break;
+	case 's': /* small */
+	default:
+		s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
+		break;
+	}
+
+	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+
+	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+
+	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_pm_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= qt2410_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= qt2410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 01c0c986d827..57b8a80f33d0 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
  *
  * linux/arch/arm/mach-s3c2410/mach-smdk2410.c
  *
@@ -49,10 +49,10 @@
 
 #include <asm/arch/regs-serial.h>
 
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
 
 static struct map_desc smdk2410_iodesc[] __initdata = {
   /* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index a382fc095110..c947c75bcbf0 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -43,9 +43,9 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/leds-gpio.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 #include "usb-simtec.h"
 
 /* macros for virtual address mods for the io space entries */
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ebf294dd31da..3b3a7db4e0dd 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,11 +1,9 @@
 /* linux/arch/arm/mach-s3c2410/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C24XX Power Manager (Suspend-To-RAM) support
- *
- * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,640 +18,139 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Parts based on arch/arm/mach-pxa/pm.c
- *
- * Thanks to Dimitry Andric for debugging
 */
 
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
-#include <asm/cacheflush.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
-
-#include <asm/mach/time.h>
-
-#include "pm.h"
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-#define PFX "s3c24xx-pm: "
-
-static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
-	/* we restore the timings here, with the proviso that the board
-	 * brings the system up in an slower, or equal frequency setting
-	 * to the original system.
-	 *
-	 * if we cannot guarantee this, then things are going to go very
-	 * wrong here, as we modify the refresh and both pll settings.
-	 */
-
-	SAVE_ITEM(S3C2410_BWSCON),
-	SAVE_ITEM(S3C2410_BANKCON0),
-	SAVE_ITEM(S3C2410_BANKCON1),
-	SAVE_ITEM(S3C2410_BANKCON2),
-	SAVE_ITEM(S3C2410_BANKCON3),
-	SAVE_ITEM(S3C2410_BANKCON4),
-	SAVE_ITEM(S3C2410_BANKCON5),
-
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-	SAVE_ITEM(S3C2410_REFRESH),
-};
-
-static struct sleep_save gpio_save[] = {
-	SAVE_ITEM(S3C2410_GPACON),
-	SAVE_ITEM(S3C2410_GPADAT),
-
-	SAVE_ITEM(S3C2410_GPBCON),
-	SAVE_ITEM(S3C2410_GPBDAT),
-	SAVE_ITEM(S3C2410_GPBUP),
-
-	SAVE_ITEM(S3C2410_GPCCON),
-	SAVE_ITEM(S3C2410_GPCDAT),
-	SAVE_ITEM(S3C2410_GPCUP),
-
-	SAVE_ITEM(S3C2410_GPDCON),
-	SAVE_ITEM(S3C2410_GPDDAT),
-	SAVE_ITEM(S3C2410_GPDUP),
-
-	SAVE_ITEM(S3C2410_GPECON),
-	SAVE_ITEM(S3C2410_GPEDAT),
-	SAVE_ITEM(S3C2410_GPEUP),
-
-	SAVE_ITEM(S3C2410_GPFCON),
-	SAVE_ITEM(S3C2410_GPFDAT),
-	SAVE_ITEM(S3C2410_GPFUP),
+#include <asm/mach-types.h>
 
-	SAVE_ITEM(S3C2410_GPGCON),
-	SAVE_ITEM(S3C2410_GPGDAT),
-	SAVE_ITEM(S3C2410_GPGUP),
-
-	SAVE_ITEM(S3C2410_GPHCON),
-	SAVE_ITEM(S3C2410_GPHDAT),
-	SAVE_ITEM(S3C2410_GPHUP),
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/h1940.h>
 
-	SAVE_ITEM(S3C2410_DCLKCON),
-};
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 #ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
-	SAVE_ITEM((va) + S3C2410_ULCON), \
-	SAVE_ITEM((va) + S3C2410_UCON), \
-	SAVE_ITEM((va) + S3C2410_UFCON), \
-	SAVE_ITEM((va) + S3C2410_UMCON), \
-	SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
-	SAVE_UART(S3C24XX_VA_UART0),
-	SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
-	SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vsprintf(buff, fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-}
-
+extern void pm_dbg(const char *fmt, ...);
 #define DBG(fmt...) pm_dbg(fmt)
 #else
 #define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
 #endif
 
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size;	/* size needed for the crc block */
-static u32 *crcs;	/* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
-{
-	while (ptr != NULL) {
-		if (ptr->child != NULL)
-			s3c2410_pm_run_res(ptr->child, fn, arg);
-
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
-			DBG("Found system RAM at %08lx..%08lx\n",
-			    ptr->start, ptr->end);
-			arg = (fn)(ptr, arg);
-		}
-
-		ptr = ptr->sibling;
-	}
-}
-
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
-	s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
-
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
-	u32 size = (u32)(res->end - res->start)+1;
-
-	size += CHECK_CHUNKSIZE-1;
-	size /= CHECK_CHUNKSIZE;
-
-	DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
-	*val += size * sizeof(u32);
-	return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
+static void s3c2410_pm_prepare(void)
 {
-	crc_size = 0;
+	/* ensure at least GSTATUS3 has the resume address */
 
-	s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
 
-	DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
 
-	crcs = kmalloc(crc_size+4, GFP_KERNEL);
-	if (crcs == NULL)
-		printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
+	if (machine_is_h1940()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
 
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
-	unsigned long addr, left;
+		/* generate check for the bootloader to check on resume */
 
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
+		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+			calc += __raw_readl(base+ptr);
 
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
-
-		*val = crc32_le(~0, phys_to_virt(addr), left);
-		val++;
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
-	return val;
-}
-
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
-{
-	if (crcs != NULL)
-		s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
-
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
-
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
-	if ((what+whatsz) < ptr)
-		return 0;
-
-	if (what > (ptr+size))
-		return 0;
-
-	return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
-	void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
-	unsigned long addr;
-	unsigned long left;
-	void *ptr;
-	u32 calc;
-
-	for (addr = res->start; addr < res->end;
-	     addr += CHECK_CHUNKSIZE) {
-		left = res->end - addr;
+	/* the RX3715 uses similar code and the same H1940 and the
+	 * same offsets for resume and checksum pointers */
 
-		if (left > CHECK_CHUNKSIZE)
-			left = CHECK_CHUNKSIZE;
+	if (machine_is_rx3715()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
 
-		ptr = phys_to_virt(addr);
+		/* generate check for the bootloader to check on resume */
 
-		if (in_region(ptr, left, crcs, crc_size)) {
-			DBG("skipping %08lx, has crc block in\n", addr);
-			goto skip_check;
-		}
+		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+			calc += __raw_readl(base+ptr);
 
-		if (in_region(ptr, left, save_at, 32*4 )) {
-			DBG("skipping %08lx, has save block in\n", addr);
-			goto skip_check;
-		}
-
-		/* calculate and check the checksum */
-
-		calc = crc32_le(~0, ptr, left);
-		if (calc != *val) {
-			printk(KERN_ERR PFX "Restore CRC error at "
-			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
-			DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
-			    addr, calc, *val);
-		}
-
-	skip_check:
-		val++;
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
-	return val;
-}
+	if ( machine_is_aml_m5900() )
+		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
 
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
-	if (crcs != NULL) {
-		s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
-		kfree(crcs);
-		crcs = NULL;
-	}
 }
 
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store()   do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+static int s3c2410_pm_resume(struct sys_device *dev)
 {
-	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
-		DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
-	}
-}
+	unsigned long tmp;
 
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
+	/* unset the return-from-sleep flag, to ensure reset */
 
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
-		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
-		__raw_writel(ptr->val, ptr->reg);
-	}
-}
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
 
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
+	if ( machine_is_aml_m5900() )
+		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
 
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
-	for (; count > 0; count--, ptr++) {
-		__raw_writel(ptr->val, ptr->reg);
-	}
+	return 0;
 }
 
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
-					unsigned long mask)
+static int s3c2410_pm_add(struct sys_device *dev)
 {
-	int i;
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
 
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if ((which) & (1L<<i)) {
-			DBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
+	return 0;
 }
 
-/* s3c2410_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
-	unsigned long irqstate;
-	unsigned long pinstate;
-	int irq = s3c2410_gpio_getirq(pin);
-
-	if (irqoffs < 4)
-		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
-	else
-		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
-	pinstate = s3c2410_gpio_getcfg(pin);
-
-	if (!irqstate) {
-		if (pinstate == S3C2410_GPIO_IRQ)
-			DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
-	} else {
-		if (pinstate == S3C2410_GPIO_IRQ) {
-			DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
-		}
-	}
-}
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
 
-/* s3c2410_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
+/* register ourselves */
 
-static void s3c2410_pm_configure_extint(void)
+static int __init s3c2410_pm_drvinit(void)
 {
-	int pin;
-
-	/* for each of the external interrupts (EINT0..EINT15) we
-	 * need to check wether it is an external interrupt source,
-	 * and then configure it as an input if it is not
-	*/
-
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
-	}
-
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
-	}
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
 }
 
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
-{
-	unsigned long regs_save[16];
-
-	/* ensure the debug is initialised (if enabled) */
-
-	s3c2410_pm_debug_init();
-
-	DBG("s3c2410_pm_enter(%d)\n", state);
-
-	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
-		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
-		return -EINVAL;
-	}
-
-	if (state != PM_SUSPEND_MEM) {
-		printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
-		return -EINVAL;
-	}
-
-	/* check if we have anything to wake-up with... bad things seem
-	 * to happen if you suspend with no wakeup (system will often
-	 * require a full power-cycle)
-	*/
-
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
-	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
-		printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
-		printk(KERN_ERR PFX "Aborting sleep\n");
-		return -EINVAL;
-	}
-
-	/* prepare check area if configured */
-
-	s3c2410_pm_check_prepare();
-
-	/* store the physical address of the register recovery block */
-
-	s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
-	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
-	/* save all necessary core registers not covered by the drivers */
-
-	s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
-	s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
-	s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
-	/* set the irq configuration for wake */
-
-	s3c2410_pm_configure_extint();
-
-	DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
-	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-	/* call cpu specific preperation */
-
-	pm_cpu_prep();
-
-	/* flush cache back to ram */
-
-	flush_cache_all();
-
-	s3c2410_pm_check_store();
-
-	/* send the cpu to sleep... */
-
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-
-	/* s3c2410_cpu_save will also act as our return point from when
-	 * we resume as it saves its own register state, so use the return
-	 * code to differentiate return from save and return from sleep */
-
-	if (s3c2410_cpu_save(regs_save) == 0) {
-		flush_cache_all();
-		pm_cpu_sleep();
-	}
-
-	/* restore the cpu state */
-
-	cpu_init();
-
-	/* restore the system state */
-
-	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
-	s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-
-	s3c2410_pm_debug_init();
-
-	/* check what irq (if any) restored the system */
-
-	DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-	    __raw_readl(S3C2410_SRCPND),
-	    __raw_readl(S3C2410_EINTPEND));
-
-	s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				    s3c_irqwake_intmask);
-
-	s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				    s3c_irqwake_eintmask);
-
-	DBG("post sleep, preparing to return\n");
-
-	s3c2410_pm_check_restore();
-
-	/* ok, let's return from sleep */
+arch_initcall(s3c2410_pm_drvinit);
+#endif
 
-	DBG("S3C2410 PM Resume (post-restore)\n");
-	return 0;
-}
+#if defined(CONFIG_CPU_S3C2440)
+static struct sysdev_driver s3c2440_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
 
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int s3c2410_pm_prepare(suspend_state_t state)
+static int __init s3c2440_pm_drvinit(void)
 {
-	return 0;
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
 }
 
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int s3c2410_pm_finish(suspend_state_t state)
-{
-	return 0;
-}
+arch_initcall(s3c2440_pm_drvinit);
+#endif
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static struct pm_ops s3c2410_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
-	.prepare	= s3c2410_pm_prepare,
-	.enter		= s3c2410_pm_enter,
-	.finish		= s3c2410_pm_finish,
+#if defined(CONFIG_CPU_S3C2442)
+static struct sysdev_driver s3c2442_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
 };
 
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
-
-int __init s3c2410_pm_init(void)
+static int __init s3c2442_pm_drvinit(void)
 {
-	printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
-	pm_set_ops(&s3c2410_pm_ops);
-	return 0;
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
 }
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
diff --git a/arch/arm/mach-s3c2410/pm.h b/arch/arm/mach-s3c2410/pm.h
deleted file mode 100644
index ffe197a119fb..000000000000
--- a/arch/arm/mach-s3c2410/pm.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/pm.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* s3c2410_pm_init
- *
- * called from board at initialisation time to setup the power
- * management
-*/
-
-#ifdef CONFIG_PM
-
-extern __init int s3c2410_pm_init(void);
-
-#else
-
-static inline int s3c2410_pm_init(void)
-{
-	return 0;
-}
-#endif
-
-/* configuration for the IRQ mask over sleep */
-extern unsigned long s3c_irqwake_intmask;
-extern unsigned long s3c_irqwake_eintmask;
-
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-extern unsigned long s3c_irqwake_eintallow;
-
-/* per-cpu sleep functions */
-
-extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
-
-/* Flags for PM Control */
-
-extern unsigned long s3c_pm_flags;
-
-/* from sleep.S */
-
-extern int  s3c2410_cpu_save(unsigned long *saveblk);
-extern void s3c2410_cpu_suspend(void);
-extern void s3c2410_cpu_resume(void);
-
-extern unsigned long s3c2410_sleep_save_phys;
-
-/* sleep save info */
-
-struct sleep_save {
-	void __iomem	*reg;
-	unsigned long	val;
-};
-
-#define SAVE_ITEM(x) \
-	{ .reg = (x) }
-
-extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
-extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
-
-#ifdef CONFIG_PM
-extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
-extern int s3c24xx_irq_resume(struct sys_device *dev);
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/arch/arm/mach-s3c2410/s3c2400.h
deleted file mode 100644
index 8b2394e1ed40..000000000000
--- a/arch/arm/mach-s3c2410/s3c2400.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2400.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C2400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     09-Fev-2006 LCVR  First version, based on s3c2410.h
-*/
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern  int s3c2400_init(void);
-
-extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2400_init_clocks(int xtal);
-
-#else
-#define s3c2400_init_clocks NULL
-#define s3c2400_init_uarts NULL
-#define s3c2400_map_io NULL
-#define s3c2400_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c
deleted file mode 100644
index 992cc6af230e..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410-clock.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "s3c2410.h"
-#include "clock.h"
-#include "cpu.h"
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-	}, {
-		.name		= "usb-bus-gadget",
-		.id		= -1,
-		.parent		= &clk_usb_bus,
-	},
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *clkp;
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsytems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2410_clkcon_enable(clkp, 0);
-	}
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
deleted file mode 100644
index e67ba3911f11..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410-dma.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <asm/dma.h>
-#include <asm/arch/dma.h>
-#include "dma.h"
-
-#include "cpu.h"
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-iis.h>
-#include <asm/arch/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
-		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
-		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	=S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
-	.select		= s3c2410_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2410_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2410_dma_mappings),
-};
-
-static int s3c2410_dma_add(struct sys_device *sysdev)
-{
-	return s3c24xx_dma_init_map(&s3c2410_dma_sel);
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_dma_driver = {
-	.add	= s3c2410_dma_add,
-};
-
-static int __init s3c2410_dma_init(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
-}
-
-arch_initcall(s3c2410_dma_init);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct sysdev_driver s3c2442_dma_driver = {
-	.add	= s3c2410_dma_add,
-};
-
-static int __init s3c2442_dma_init(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
-}
-
-arch_initcall(s3c2442_dma_init);
-#endif
-
diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c
deleted file mode 100644
index ec3a276cc3cf..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410-gpio.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-			   unsigned int config)
-{
-	void __iomem *reg = S3C24XX_EINFLT0;
-	unsigned long flags;
-	unsigned long val;
-
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
-
-	config &= 0xff;
-
-	pin -= S3C2410_GPG8;
-	reg += pin & ~3;
-
-	local_irq_save(flags);
-
-	/* update filter width and clock source */
-
-	val = __raw_readl(reg);
-	val &= ~(0xff << ((pin & 3) * 8));
-	val |= config << ((pin & 3) * 8);
-	__raw_writel(val, reg);
-
-	/* update filter enable */
-
-	val = __raw_readl(S3C24XX_EXTINT2);
-	val &= ~(1 << ((pin * 4) + 3));
-	val |= on << ((pin * 4) + 3);
-	__raw_writel(val, S3C24XX_EXTINT2);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c
deleted file mode 100644
index c796c9c76e78..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410-irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
-	return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
-	.add		= s3c2410_irq_add,
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-static int s3c2410_irq_init(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
deleted file mode 100644
index 8bb6e5e21f59..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410-pm.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-static void s3c2410_pm_prepare(void)
-{
-	/* ensure at least GSTATUS3 has the resume address */
-
-	__raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
-	DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
-	if (machine_is_h1940()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	/* the RX3715 uses similar code and the same H1940 and the
-	 * same offsets for resume and checksum pointers */
-
-	if (machine_is_rx3715()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
-
-}
-
-static int s3c2410_pm_resume(struct sys_device *dev)
-{
-	unsigned long tmp;
-
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
-	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-
-	return 0;
-}
-
-static int s3c2410_pm_add(struct sys_device *dev)
-{
-	pm_cpu_prep = s3c2410_pm_prepare;
-	pm_cpu_sleep = s3c2410_cpu_suspend;
-
-	return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_pm_driver = {
-	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
-	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct sysdev_driver s3c2440_pm_driver = {
-	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct sysdev_driver s3c2442_pm_driver = {
-	.add		= s3c2410_pm_add,
-	.resume		= s3c2410_pm_resume,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S
deleted file mode 100644
index 9179a1024588..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410-sleep.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-serial.h>
-
-	/* s3c2410_cpu_suspend
-	 *
-	 * put the cpu into sleep mode
-	*/
-
-ENTRY(s3c2410_cpu_suspend)
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	8
-s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
-1:	beq	1b
-	mov	pc, r14
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 4cdc0d70c19f..1a86a9803753 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -31,10 +31,10 @@
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>
 
-#include "s3c2410.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
 
 /* Initial IO mappings */
 
@@ -110,7 +110,7 @@ static struct sys_device s3c2410_sysdev = {
 
 /* need to register class before we actually register the device, and
  * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
+ * drivers even try to use it (even if not on an s3c2410 based system)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
diff --git a/arch/arm/mach-s3c2410/s3c2410.h b/arch/arm/mach-s3c2410/s3c2410.h
deleted file mode 100644
index fbed084f26d0..000000000000
--- a/arch/arm/mach-s3c2410/s3c2410.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2410.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2410 machine directory
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#ifdef CONFIG_CPU_S3C2410
-
-extern  int s3c2410_init(void);
-
-extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2410_init_clocks(int xtal);
-
-extern  int s3c2410_baseclk_add(void);
-
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2412.h b/arch/arm/mach-s3c2410/s3c2412.h
deleted file mode 100644
index c6e56032a6e7..000000000000
--- a/arch/arm/mach-s3c2410/s3c2412.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2412.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2412 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2412
-
-extern  int s3c2412_init(void);
-
-extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2412_init_clocks(int xtal);
-
-extern  int s3c2412_baseclk_add(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/arch/arm/mach-s3c2410/s3c2440.h
deleted file mode 100644
index dcd316076c59..000000000000
--- a/arch/arm/mach-s3c2410/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2442.h b/arch/arm/mach-s3c2410/s3c2442.h
deleted file mode 100644
index 0ae37d24866c..000000000000
--- a/arch/arm/mach-s3c2410/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s3c2410/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 2018c2e1dcc5..637aaba65390 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -34,126 +34,35 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-serial.h>
 
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
-*/
-//#define CONFIG_DEBUG_RESUME
-
-	.text
-
-	/* s3c2410_cpu_save
-	 *
-	 * save enough of the CPU state to allow us to re-start
-	 * pm.c code. as we store items like the sp/lr, we will
-	 * end up returning from this function when the cpu resumes
-	 * so the return value is set to mark this.
-	 *
-	 * This arangement means we avoid having to flush the cache
-	 * from this code.
-	 *
-	 * entry:
-	 *	r0 = pointer to save block
-	 *
-	 * exit:
-	 *	r0 = 0 => we stored everything
-	 *	     1 => resumed from sleep
-	*/
-
-ENTRY(s3c2410_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-
-	@@ store co-processor registers
-
-	mrc	p15, 0, r4, c15, c1, 0	@ CP access register
-	mrc	p15, 0, r5, c13, c0, 0	@ PID
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c1, c0, 0	@ control register
-
-	stmia	r0, { r4 - r13 }
-
-	mov	r0, #0
-	ldmfd	sp, { r4 - r12, pc }
-
-	@@ return to the caller, after having the MMU
-	@@ turned on, this restores the last bits from the
-	@@ stack
-resume_with_mmu:
-	mov	r0, #1
-	ldmfd	sp!, { r4 - r12, pc }
-
-	.ltorg
-
-	@@ the next bits sit in the .data segment, even though they
-	@@ happen to be code... the s3c2410_sleep_save_phys needs to be
-	@@ accessed by the resume code before it can restore the MMU.
-	@@ This means that the variable has to be close enough for the
-	@@ code to read it... since the .text segment needs to be RO,
-	@@ the data segment can be the only place to put this code.
-
-	.data
-
-	.global	s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
-	.word	0
-
-	/* s3c2410_cpu_resume
+	/* s3c2410_cpu_suspend
 	 *
-	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
+	 * put the cpu into sleep mode
 	*/
 
-ENTRY(s3c2410_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	@@ load UART to allow us to print the two characters for
-	@@ resume debug
-
-	mov	r2, #S3C24XX_PA_UART & 0xff000000
-	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
-	/* SMDK2440 LED set */
-	mov	r14, #S3C24XX_PA_GPIO
-	ldr	r12, [ r14, #0x54 ]
-	bic	r12, r12, #3<<4
-	orr	r12, r12, #1<<7
-	str	r12, [ r14, #0x54 ]
-#endif
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'L'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-1001:
-	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
-	tst	r14, #S3C2410_UTRSTAT_TXE
-	beq	1001b
-#endif /* CONFIG_DEBUG_RESUME */
-
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
-
-	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c15, c1, 0		@ CP access register
-	mcr	p15, 0, r5, c13, c0, 0		@ PID
-	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
-	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'R'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-#endif
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
-	nop					@ second-to-last before mmu
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+ENTRY(s3c2410_cpu_suspend)
+	@@ prepare cpu to sleep
+
+	ldr	r4, =S3C2410_REFRESH
+	ldr	r5, =S3C24XX_MISCCR
+	ldr	r6, =S3C2410_CLKCON
+	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+
+	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
+	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
+
+	teq	pc, #0			@ first as a trial-run to load cache
+	bl	s3c2410_do_sleep
+	teq	r0, r0			@ now do it for real
+	b	s3c2410_do_sleep	@
+
+	@@ align next bit of code to cache line
+	.align	5
+s3c2410_do_sleep:
+	streq	r7, [ r4 ]			@ SDRAM sleep command
+	streq	r8, [ r5 ]			@ SDRAM power-down config
+	streq	r9, [ r6 ]			@ CPU sleep
+1:	beq	1b
+	mov	pc, r14
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 22b0e1cdd4bf..bcd562ac1d3d 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -35,7 +35,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "devs.h"
+#include <asm/plat-s3c24xx/devs.h>
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
new file mode 100644
index 000000000000..befc5fdbb613
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -0,0 +1,58 @@
+# arch/arm/mach-s3c2412/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2412
+	bool
+	depends on ARCH_S3C2410
+	select S3C2412_PM if PM
+	select S3C2412_DMA if S3C2410_DMA
+	help
+	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2412_ONLY
+	bool
+	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+		   !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+	default y if CPU_S3C2412
+
+config S3C2412_DMA
+	bool
+	depends on CPU_S3C2412
+	help
+	  Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+	bool
+	help
+	  Internal config node to apply S3C2412 power management
+
+
+menu "S3C2412 Machines"
+
+config MACH_SMDK2413
+	bool "SMDK2413"
+	select CPU_S3C2412
+	select MACH_S3C2413
+	select MACH_SMDK
+	help
+	  Say Y here if you are using an SMDK2413
+
+config MACH_S3C2413
+	bool
+	help
+	  Internal node for S3C2413 version of SMDK2413, so that
+	  machine_is_s3c2413() will work when MACH_SMDK2413 is
+	  selected
+
+config MACH_VSTMS
+	bool "VMSTMS"
+	select CPU_S3C2412
+	help
+	  Say Y here if you are using an VSTMS board
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
new file mode 100644
index 000000000000..f8e011691b31
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -0,0 +1,21 @@
+# arch/arm/mach-s3c2412/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= irq.o
+obj-$(CONFIG_CPU_S3C2412)	+= clock.o
+obj-$(CONFIG_S3C2412_DMA)	+= dma.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2413)	+= mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS)	+= mach-vstms.o
diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2412/clock.c
index 8f94ad83901d..6a8e4448770b 100644
--- a/arch/arm/mach-s3c2410/s3c2412-clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c
+/* linux/arch/arm/mach-s3c2412/clock.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -41,9 +41,9 @@
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "s3c2412.h"
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 /* We currently have to assume that the system is running
  * from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2412/dma.c
index 138f726ac6bf..d0f4695c09d9 100644
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
+/* linux/arch/arm/mach-s3c2412/dma.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -21,8 +21,8 @@
 #include <asm/arch/dma.h>
 #include <asm/io.h>
 
-#include "dma.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
@@ -146,6 +146,7 @@ static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
 
 static int s3c2412_dma_add(struct sys_device *sysdev)
 {
+	s3c2410_dma_init();
 	return s3c24xx_dma_init_map(&s3c2412_dma_sel);
 }
 
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2412/irq.c
index ffcc30b23a80..e89dbdcb1b7b 100644
--- a/arch/arm/mach-s3c2410/s3c2412-irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
+/* linux/arch/arm/mach-s3c2412/irq.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -35,9 +35,9 @@
 #include <asm/arch/regs-irq.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "cpu.h"
-#include "irq.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/irq.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 /* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
  * having them turn up in both the INT* and the EINT* registers. Whilst
diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 4f89abd7a6df..b5befce6c8d3 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c
+/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -37,15 +37,16 @@
 #include <asm/arch/regs-lcd.h>
 
 #include <asm/arch/idle.h>
+#include <asm/arch/udc.h>
 #include <asm/arch/fb.h>
 
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
 
 static struct map_desc smdk2413_iodesc[] __initdata = {
 };
@@ -75,12 +76,38 @@ static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
 	}
 };
 
+static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+	switch (cmd)
+	{
+		case S3C2410_UDC_P_ENABLE :
+			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			break;
+		case S3C2410_UDC_P_DISABLE :
+			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			break;
+		case S3C2410_UDC_P_RESET :
+			break;
+		default:
+			break;
+	}
+}
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+	.udc_command		= smdk2413_udc_pullup,
+};
+
+
 static struct platform_device *smdk2413_devices[] __initdata = {
 	&s3c_device_usb,
 	//&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c,
 	&s3c_device_iis,
+	&s3c_device_usbgadget,
 };
 
 static struct s3c24xx_board smdk2413_board __initdata = {
@@ -109,7 +136,19 @@ static void __init smdk2413_map_io(void)
 }
 
 static void __init smdk2413_machine_init(void)
-{
+{	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+
+	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+			      S3C2410_MISCCR_USBSUSPND0 |
+			      S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+
+ 	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+
 	smdk_machine_init();
 }
 
@@ -126,6 +165,19 @@ MACHINE_START(S3C2413, "S3C2413")
 	.timer		= &s3c24xx_timer,
 MACHINE_END
 
+MACHINE_START(SMDK2412, "SMDK2412")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 0360e1055bcd..4231b549d797 100644
--- a/arch/arm/mach-s3c2410/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-vstms.c
+/* linux/arch/arm/mach-s3c2412/mach-vstms.c
  *
  * (C) 2006 Thomas Gleixner <tglx@linutronix.de>
  *
@@ -28,7 +28,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -43,11 +42,11 @@
 
 #include <asm/arch/nand.h>
 
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 
 static struct map_desc vstms_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2412/pm.c
index 19b63322d259..8988dac388a9 100644
--- a/arch/arm/mach-s3c2410/s3c2412-pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c
+/* linux/arch/arm/mach-s3c2412/pm.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -28,10 +28,10 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-dsc.h>
 
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
-#include "s3c2412.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
 
 static void s3c2412_cpu_suspend(void)
 {
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 2f651a811ecd..aafe0bc593f1 100644
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412.c
+/* linux/arch/arm/mach-s3c2412/s3c2412.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -38,11 +38,11 @@
 #include <asm/arch/regs-gpioj.h>
 #include <asm/arch/regs-dsc.h>
 
-#include "s3c2412.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
new file mode 100644
index 000000000000..e3bfda098c0f
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -0,0 +1,71 @@
+# arch/arm/mach-s3c2440/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2440
+	bool
+	depends on ARCH_S3C2410
+	select S3C2410_CLOCK
+	select S3C2410_PM if PM
+	select S3C2410_GPIO
+	select S3C2440_DMA if S3C2410_DMA
+	select CPU_S3C244X
+	help
+	  Support for S3C2440 Samsung Mobile CPU based systems.
+
+config S3C2440_DMA
+	bool
+	depends on ARCH_S3C2410 && CPU_S3C24405B
+	help
+	  Support for S3C2440 specific DMA code5A
+
+
+menu "S3C2440 Machines"
+
+config MACH_ANUBIS
+	bool "Simtec Electronics ANUBIS"
+	select CPU_S3C2440
+	select PM_SIMTEC if PM
+	help
+	  Say Y here if you are using the Simtec Electronics ANUBIS
+	  development system
+
+config MACH_OSIRIS
+	bool "Simtec IM2440D20 (OSIRIS) module"
+	select CPU_S3C2440
+	select PM_SIMTEC if PM
+	help
+	  Say Y here if you are using the Simtec IM2440D20 module, also
+	  known as the Osiris.
+
+config MACH_RX3715
+	bool "HP iPAQ rx3715"
+	select CPU_S3C2440
+	select PM_H1940 if PM
+	help
+	  Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+	bool "SMDK2440"
+	select CPU_S3C2440
+	select MACH_SMDK
+	help
+	  Say Y here if you are using the SMDK2440.
+
+config MACH_NEXCODER_2440
+ 	bool "NexVision NEXCODER 2440 Light Board"
+ 	select CPU_S3C2440
+	help
+ 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config SMDK2440_CPU2440
+	bool "SMDK2440 with S3C2440 CPU module"
+	depends on ARCH_S3C2440
+	default y if ARCH_S3C2440
+	select CPU_S3C2440
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
new file mode 100644
index 000000000000..c81ed6248dcb
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -0,0 +1,23 @@
+# arch/arm/mach-s3c2440/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2440)	+= irq.o
+obj-$(CONFIG_CPU_S3C2440)	+= clock.o
+obj-$(CONFIG_S3C2440_DMA)	+= dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
+obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2440/clock.c
index ba13c1d079d1..79e2ea4adaf3 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c
+/* linux/arch/arm/mach-s3c2440/clock.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -41,8 +41,8 @@
 
 #include <asm/arch/regs-clock.h>
 
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 /* S3C2440 extended clock support */
 
diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2440/dma.c
index 47b861b9443d..cd035a3ec878 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
+/* linux/arch/arm/mach-s3c2440/dma.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -19,9 +19,9 @@
 
 #include <asm/dma.h>
 #include <asm/arch/dma.h>
-#include "dma.h"
 
-#include "cpu.h"
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
@@ -147,8 +147,53 @@ static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
 	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
 };
 
+static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
+	.channels	= {
+		[DMACH_SDI]	= {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+				[2]	= 1 | DMA_CH_VALID,
+				[3]	= 0 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_IN]	= {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_I2S_OUT]	= {
+			.list	= {
+				[0]	= 2 | DMA_CH_VALID,
+				[1]	= 1 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_PCM_IN] = {
+			.list	= {
+				[0]	= 2 | DMA_CH_VALID,
+				[1]	= 1 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_PCM_OUT] = {
+			.list	= {
+				[0]	= 1 | DMA_CH_VALID,
+				[1]	= 3 | DMA_CH_VALID,
+			},
+		},
+		[DMACH_MIC_IN] = {
+			.list	= {
+				[0]	= 3 | DMA_CH_VALID,
+				[1]	= 2 | DMA_CH_VALID,
+			},
+		},
+	},
+};
+
 static int s3c2440_dma_add(struct sys_device *sysdev)
 {
+	s3c2410_dma_init();
+	s3c24xx_dma_order_set(&s3c2440_dma_order);
 	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
 }
 
diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2440/dsc.c
index c92ea66ba45e..2995ff5681bb 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-dsc.c
+/* linux/arch/arm/mach-s3c2440/dsc.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
@@ -27,8 +27,8 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-dsc.h>
 
-#include "cpu.h"
-#include "s3c2440.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2440/irq.c
index 1ba19b27ab05..1069d13d8c57 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+/* linux/arch/arm/mach-s3c2440/irq.c
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -35,9 +35,9 @@
 #include <asm/arch/regs-irq.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
 
 /* WDT/AC97 */
 
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 0fad0c2fe07b..3f0288eb1ed5 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-anubis.c
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
  * Copyright (c) 2003-2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -42,9 +42,9 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
 
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index d6dfdad8c90b..6d551d88330b 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-nexcoder.c
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
  *
  * Copyright (c) 2004 Nex Vision
  *   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
@@ -38,11 +38,11 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-serial.h>
 
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct map_desc nexcoder_iodesc[] __initdata = {
 	/* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 37b40850c9b9..2ed8e51f20c8 100644
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-osiris.c
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
  * Copyright (c) 2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -41,9 +41,9 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 /* onboard perihpheral map */
 
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index ecbcdf79d739..ae1d0a81fd6a 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-rx3715.c
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -33,7 +33,6 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -46,10 +45,10 @@
 #include <asm/arch/nand.h>
 #include <asm/arch/fb.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 static struct map_desc rx3715_iodesc[] __initdata = {
 	/* dump ISA space somewhere unused */
@@ -225,7 +224,9 @@ static void __init rx3715_init_irq(void)
 
 static void __init rx3715_init_machine(void)
 {
+#ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
 	s3c2410_pm_init();
 
 	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 2b61f4ed1da4..c17eb5b1f6b4 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2440.c
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
  *
  * Copyright (c) 2004,2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -27,12 +27,10 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-lcd.h>
@@ -40,13 +38,13 @@
 #include <asm/arch/idle.h>
 #include <asm/arch/fb.h>
 
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
 
 static struct map_desc smdk2440_iodesc[] __initdata = {
 	/* ISA IO Space map (memory space selected by A24) */
@@ -144,6 +142,7 @@ static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
 #endif
 
 	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
+	.type		= S3C2410_LCDCON1_TFT16BPP,
 
 	.width		= 240,
 	.height		= 320,
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 344eb27cca48..90e1da61fbc3 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440.c
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
  *
  * Copyright (c) 2004-2006 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
@@ -29,9 +29,9 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "s3c2440.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
new file mode 100644
index 000000000000..bf8d87abfab3
--- /dev/null
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -0,0 +1,27 @@
+# arch/arm/mach-s3c2442/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2442
+	bool
+	depends on ARCH_S3C2420
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	select CPU_S3C244X
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+
+menu "S3C2442 Machines"
+
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+	depends on ARCH_S3C2440
+	select CPU_S3C2442
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
new file mode 100644
index 000000000000..2a909c6c5798
--- /dev/null
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -0,0 +1,16 @@
+# arch/arm/mach-s3c2442/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C2442)	+= clock.o
+
+# Machine support
+
diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2442/clock.c
index 4e292ca7c9be..5b9e830ac4d3 100644
--- a/arch/arm/mach-s3c2410/s3c2442-clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c
+/* linux/arch/arm/mach-s3c2442/clock.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
@@ -41,8 +41,8 @@
 
 #include <asm/arch/regs-clock.h>
 
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 /* S3C2442 extended clock support */
 
diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
index 428732ee68c4..fbf8264249da 100644
--- a/arch/arm/mach-s3c2410/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2442.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
@@ -19,8 +19,8 @@
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
 
-#include "s3c2442.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct sys_device s3c2442_sysdev = {
 	.cls		= &s3c2442_sysclass,
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
new file mode 100644
index 000000000000..c649bb2e7ce8
--- /dev/null
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -0,0 +1,29 @@
+# arch/arm/mach-s3c2443/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2443
+	bool
+	depends on ARCH_S3C2410
+	select S3C2443_DMA if S3C2410_DMA
+	help
+	  Support for the S3C2443 SoC from the S3C24XX line
+
+config S3C2443_DMA
+	bool
+	depends on CPU_S3C2443
+	help
+	  Internal config node for S3C2443 DMA support
+
+menu "S3C2443 Machines"
+
+config MACH_SMDK2443
+	bool "SMDK2443"
+	select CPU_S3C2443
+	select MACH_SMDK
+	help
+	  Say Y here if you are using an SMDK2443
+
+endmenu
diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile
new file mode 100644
index 000000000000..d1843c9eb8bd
--- /dev/null
+++ b/arch/arm/mach-s3c2443/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s3c2443/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= irq.o
+obj-$(CONFIG_CPU_S3C2443)	+= clock.o
+
+obj-$(CONFIG_S3C2443_DMA)	+= dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2443)	+= mach-smdk2443.o
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
new file mode 100644
index 000000000000..dd2272fb1131
--- /dev/null
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -0,0 +1,1007 @@
+/* linux/arch/arm/mach-s3c2443/clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* We currently have to assume that the system is running
+ * from the XTPll input, and that all ***REFCLKs are being
+ * fed from it, as we cannot read the state of OM[4] from
+ * software.
+ *
+ * It would be possible for each board initialisation to
+ * set the correct muxing at initialisation
+*/
+
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2443_HCLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2443_HCLKCON);
+
+	return 0;
+}
+
+static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2443_PCLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2443_HCLKCON);
+
+	return 0;
+}
+
+static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->ctrlbit;
+	unsigned long clkcon;
+
+	clkcon = __raw_readl(S3C2443_SCLKCON);
+
+	if (enable)
+		clkcon |= clocks;
+	else
+		clkcon &= ~clocks;
+
+	__raw_writel(clkcon, S3C2443_SCLKCON);
+
+	return 0;
+}
+
+static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate,
+					      unsigned int max)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		return parent_rate;
+
+	/* note, we remove the +/- 1 calculations as they cancel out */
+
+	div = (rate / parent_rate);
+
+	if (div < 1)
+		div = 1;
+	else if (div > max)
+		div = max;
+
+	return parent_rate / div;
+}
+
+static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
+					       unsigned long rate)
+{
+	return s3c2443_roundrate_clksrc(clk, rate, 4);
+}
+
+static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
+						unsigned long rate)
+{
+	return s3c2443_roundrate_clksrc(clk, rate, 16);
+}
+
+static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
+						 unsigned long rate)
+{
+	return s3c2443_roundrate_clksrc(clk, rate, 256);
+}
+
+/* clock selections */
+
+/* CPU EXTCLK input */
+static struct clk clk_ext = {
+	.name		= "ext",
+	.id		= -1,
+};
+
+static struct clk clk_mpllref = {
+	.name		= "mpllref",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+#if 0
+static struct clk clk_mpll = {
+	.name		= "mpll",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+};
+#endif
+
+static struct clk clk_epllref;
+
+static struct clk clk_epll = {
+	.name		= "epll",
+	.parent		= &clk_epllref,
+	.id		= -1,
+};
+
+static struct clk clk_i2s_ext = {
+	.name		= "i2s-ext",
+	.id		= -1,
+};
+
+static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
+
+	if (parent == &clk_xtal)
+		clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
+	else if (parent == &clk_ext)
+		clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
+	else if (parent != &clk_mpllref)
+		return -EINVAL;
+
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static struct clk clk_epllref = {
+	.name		= "epllref",
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_epllref,
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
+	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
+
+	return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+	.name		= "mdivclk",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+	.get_rate	= s3c2443_getrate_mdivclk,
+};
+
+
+static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
+		    S3C2443_CLKSRC_EXTCLK_DIV);
+
+	if (parent == &clk_mpll)
+		clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
+	else if (parent == &clk_mdivclk)
+		clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
+	else if (parent != &clk_mpllref)
+		return -EINVAL;
+
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static struct clk clk_msysclk = {
+	.name		= "msysclk",
+	.parent		= &clk_xtal,
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_msysclk,
+};
+
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	if (parent == &clk_epll)
+		clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
+	else if (parent == &clk_epllref)
+		clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
+	else
+		return -EINVAL;
+
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+	clk->parent = parent;
+
+	return 0;
+}
+
+static struct clk clk_esysclk = {
+	.name		= "esysclk",
+	.parent		= &clk_epll,
+	.id		= -1,
+	.set_parent	= s3c2443_setparent_esysclk,
+};
+
+/* uartclk
+ *
+ * UART baud-rate clock sourced from esysclk via a divisor
+*/
+
+static unsigned long s3c2443_getrate_uart(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_UARTDIV_MASK;
+	div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc16(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_uart = {
+	.name		= "uartclk",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.get_rate	= s3c2443_getrate_uart,
+	.set_rate	= s3c2443_setrate_uart,
+	.round_rate	= s3c2443_roundrate_clksrc16,
+};
+
+/* hsspi
+ *
+ * high-speed spi clock, sourced from esysclk
+*/
+
+static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
+	div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc4(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_hsspi = {
+	.name		= "hsspi",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_hsspi,
+	.set_rate	= s3c2443_setrate_hsspi,
+	.round_rate	= s3c2443_roundrate_clksrc4,
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+	div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc4(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+struct clk clk_usb_bus_host = {
+	.name		= "usb-bus-host-parent",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_usbhost,
+	.set_rate	= s3c2443_setrate_usbhost,
+	.round_rate	= s3c2443_roundrate_clksrc4,
+};
+
+/* clk_hsmcc_div
+ *
+ * this clock is sourced from epll, and is fed through a divider,
+ * to a mux controlled by sclkcon where either it or a extclk can
+ * be fed to the hsmmc block
+*/
+
+static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
+	div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc4(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_hsmmc_div = {
+	.name		= "hsmmc-div",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.get_rate	= s3c2443_getrate_hsmmc_div,
+	.set_rate	= s3c2443_setrate_hsmmc_div,
+	.round_rate	= s3c2443_roundrate_clksrc4,
+};
+
+static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
+
+	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
+		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
+
+	if (parent == &clk_epll)
+		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
+	else if (parent == &clk_ext)
+		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
+	else
+		return -EINVAL;
+
+	if (clk->usage > 0) {
+		__raw_writel(clksrc, S3C2443_SCLKCON);
+	}
+
+	clk->parent = parent;
+	return 0;
+}
+
+static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
+{
+	return s3c2443_setparent_hsmmc(clk, clk->parent);
+}
+
+static struct clk clk_hsmmc = {
+	.name		= "hsmmc-if",
+	.id		= -1,
+	.parent		= &clk_hsmmc_div,
+	.enable		= s3c2443_enable_hsmmc,
+	.set_parent	= s3c2443_setparent_hsmmc,
+};
+
+/* i2s_eplldiv
+ *
+ * this clock is the output from the i2s divisor of esysclk
+*/
+
+static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_I2SDIV_MASK;
+	div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc16(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_i2s_eplldiv = {
+	.name		= "i2s-eplldiv",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.get_rate	= s3c2443_getrate_i2s_eplldiv,
+	.set_rate	= s3c2443_setrate_i2s_eplldiv,
+	.round_rate	= s3c2443_roundrate_clksrc16,
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+*/
+
+static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+	clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+
+	if (parent == &clk_epllref)
+		clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
+	else if (parent == &clk_i2s_ext)
+		clksrc |= S3C2443_CLKSRC_I2S_EXT;
+	else if (parent != &clk_i2s_eplldiv)
+		return -EINVAL;
+
+	clk->parent = parent;
+	__raw_writel(clksrc, S3C2443_CLKSRC);
+
+	return 0;
+}
+
+static struct clk clk_i2s = {
+	.name		= "i2s-if",
+	.id		= -1,
+	.parent		= &clk_i2s_eplldiv,
+	.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.set_parent	= s3c2443_setparent_i2s,
+};
+
+/* cam-if
+ *
+ * camera interface bus-clock, divided down from esysclk
+*/
+
+static unsigned long s3c2443_getrate_cam(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div  &= S3C2443_CLKDIV1_CAMDIV_MASK;
+	div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc16(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
+	clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+	__raw_writel(clkdiv1, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_cam = {
+	.name		= "camif-upll",		/* same as 2440 name */
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_cam,
+	.set_rate	= s3c2443_setrate_cam,
+	.round_rate	= s3c2443_roundrate_clksrc16,
+};
+
+/* display-if
+ *
+ * display interface clock, divided from esysclk
+*/
+
+static unsigned long s3c2443_getrate_display(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+	div &= S3C2443_CLKDIV1_DISPDIV_MASK;
+	div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
+
+	return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+	rate = s3c2443_roundrate_clksrc256(clk, rate);
+	rate = parent_rate / rate;
+
+	clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+	clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+	__raw_writel(clkdivn, S3C2443_CLKDIV1);
+	return 0;
+}
+
+static struct clk clk_display = {
+	.name		= "display-if",
+	.id		= -1,
+	.parent		= &clk_esysclk,
+	.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+	.enable		= s3c2443_clkcon_enable_s,
+	.get_rate	= s3c2443_getrate_display,
+	.set_rate	= s3c2443_setrate_display,
+	.round_rate	= s3c2443_roundrate_clksrc256,
+};
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "sdi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_SDI,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIC,
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIS,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_SPI1,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "dma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA0,
+	}, {
+		.name		= "dma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA1,
+	}, {
+		.name		= "dma",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA2,
+	}, {
+		.name		= "dma",
+		.id		= 3,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA3,
+	}, {
+		.name		= "dma",
+		.id		= 4,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA4,
+	}, {
+		.name		= "dma",
+		.id		= 5,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA5,
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_LCDC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBD,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_PWMT,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_WDT,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus_host,
+	}
+};
+
+/* clocks to add where we need to check their parentage */
+
+/* s3c2443_clk_initparents
+ *
+ * Initialise the parents for the clocks that we get at start-time
+*/
+
+static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
+{
+	printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
+	return clk_set_parent(clk, parent);
+}
+
+static void __init s3c2443_clk_initparents(void)
+{
+	unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+	struct clk *parent;
+
+	switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
+	case S3C2443_CLKSRC_EPLLREF_EXTCLK:
+		parent = &clk_ext;
+		break;
+
+	case S3C2443_CLKSRC_EPLLREF_XTAL:
+	default:
+		parent = &clk_xtal;
+		break;
+
+	case S3C2443_CLKSRC_EPLLREF_MPLLREF:
+	case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
+		parent = &clk_mpllref;
+		break;
+	}
+
+	clk_init_set_parent(&clk_epllref, parent);
+
+	switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
+	case S3C2443_CLKSRC_I2S_EXT:
+		parent = &clk_i2s_ext;
+		break;
+
+	case S3C2443_CLKSRC_I2S_EPLLDIV:
+	default:
+		parent = &clk_i2s_eplldiv;
+		break;
+
+	case S3C2443_CLKSRC_I2S_EPLLREF:
+	case S3C2443_CLKSRC_I2S_EPLLREF3:
+		parent = &clk_epllref;
+	}
+
+	clk_init_set_parent(&clk_i2s, &clk_epllref);
+
+	/* esysclk source */
+
+	parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
+		&clk_epll : &clk_epllref;
+
+	clk_init_set_parent(&clk_esysclk, parent);
+
+	/* msysclk source */
+
+	if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
+		parent = &clk_mpll;
+	} else {
+		parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
+			&clk_mdivclk : &clk_mpllref;
+	}
+
+	clk_init_set_parent(&clk_msysclk, parent);
+}
+
+/* armdiv divisor table */
+
+static unsigned int armdiv[16] = {
+	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
+	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
+	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
+	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
+	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
+	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
+	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
+	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
+};
+
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+	clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+	return clkcon0 + 1;
+}
+
+/* clocks to add straight away */
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus_host,
+	&clk_usb_bus,
+	&clk_esysclk,
+	&clk_epllref,
+	&clk_mpllref,
+	&clk_msysclk,
+	&clk_uart,
+	&clk_display,
+	&clk_cam,
+	&clk_i2s_eplldiv,
+	&clk_i2s,
+	&clk_hsspi,
+	&clk_hsmmc_div,
+	&clk_hsmmc,
+};
+
+void __init s3c2443_init_clocks(int xtal)
+{
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	unsigned long pll;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long pclk;
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	pll = s3c2443_get_mpll(mpllcon, xtal);
+
+	fclk = pll / s3c2443_fclk_div(clkdiv0);
+	hclk = fclk / s3c2443_get_prediv(clkdiv0);
+	hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+ 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+	s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+
+	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(pll), print_mhz(fclk),
+	       print_mhz(hclk), print_mhz(pclk));
+
+	s3c2443_clk_initparents();
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+
+	clk_usb_bus.parent = &clk_usb_bus_host;
+
+	/* ensure usb bus clock is within correct rate of 48MHz */
+
+	if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+		clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+	}
+
+	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(clk_get_rate(&clk_epll)),
+	       print_mhz(clk_get_rate(&clk_usb_bus)));
+
+	/* register clocks from clock array */
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	/* We must be careful disabling the clocks we are not intending to
+	 * be using at boot time, as subsytems such as the LCD which do
+	 * their own DMA requests to the bus can cause the system to lockup
+	 * if they where in the middle of requesting bus access.
+	 *
+	 * Disabling the LCD clock if the LCD is active is very dangerous,
+	 * and therefore the bootloader should be careful to not enable
+	 * the LCD clock if it is not needed.
+	*/
+
+	/* install (and disable) the clocks we do not need immediately */
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+}
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
new file mode 100644
index 000000000000..f70e8ccffc3d
--- /dev/null
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -0,0 +1,180 @@
+/* linux/arch/arm/mach-s3c2443/dma.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { \
+		[0]	= (x) | DMA_CH_VALID,	\
+		[1]	= (x) | DMA_CH_VALID,	\
+		[2]	= (x) | DMA_CH_VALID,	\
+		[3]	= (x) | DMA_CH_VALID,	\
+		[4]	= (x) | DMA_CH_VALID,	\
+		[5]     = (x) | DMA_CH_VALID,	\
+	}
+
+static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
+	[DMACH_XD0] = {
+		.name		= "xdreq0",
+		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ0),
+	},
+	[DMACH_XD1] = {
+		.name		= "xdreq1",
+		.channels	= MAP(S3C2443_DMAREQSEL_XDREQ1),
+	},
+	[DMACH_SDI] = {
+		.name		= "sdi",
+		.channels	= MAP(S3C2443_DMAREQSEL_SDI),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_SPI0] = {
+		.name		= "spi0",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI0TX),
+		.hw_addr.to	= S3C2410_PA_SPI + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + S3C2410_SPRDAT,
+	},
+	[DMACH_SPI1] = {
+		.name		= "spi1",
+		.channels	= MAP(S3C2443_DMAREQSEL_SPI1TX),
+		.hw_addr.to	= S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+		.hw_addr.from	= S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+	},
+	[DMACH_UART0] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART0_0),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART1_0),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART2_0),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+      	[DMACH_UART3] = {
+		.name		= "uart3",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART3_0),
+		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
+	},
+	[DMACH_UART0_SRC2] = {
+		.name		= "uart0",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART0_1),
+		.hw_addr.to	= S3C2410_PA_UART0 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART0 + S3C2410_URXH,
+	},
+	[DMACH_UART1_SRC2] = {
+		.name		= "uart1",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART1_1),
+		.hw_addr.to	= S3C2410_PA_UART1 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART1 + S3C2410_URXH,
+	},
+      	[DMACH_UART2_SRC2] = {
+		.name		= "uart2",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART2_1),
+		.hw_addr.to	= S3C2410_PA_UART2 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2410_PA_UART2 + S3C2410_URXH,
+	},
+      	[DMACH_UART3_SRC2] = {
+		.name		= "uart3",
+		.channels	= MAP(S3C2443_DMAREQSEL_UART3_1),
+		.hw_addr.to	= S3C2443_PA_UART3 + S3C2410_UTXH,
+		.hw_addr.from	= S3C2443_PA_UART3 + S3C2410_URXH,
+	},
+	[DMACH_TIMER] = {
+		.name		= "timer",
+		.channels	= MAP(S3C2443_DMAREQSEL_TIMER),
+	},
+	[DMACH_I2S_IN] = {
+		.name		= "i2s-sdi",
+		.channels	= MAP(S3C2443_DMAREQSEL_I2SRX),
+		.hw_addr.from	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_I2S_OUT] = {
+		.name		= "i2s-sdo",
+		.channels	= MAP(S3C2443_DMAREQSEL_I2STX),
+		.hw_addr.to	= S3C2410_PA_IIS + S3C2410_IISFIFO,
+	},
+	[DMACH_PCM_IN] = {
+		.name		= "pcm-in",
+		.channels	= MAP(S3C2443_DMAREQSEL_PCMIN),
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_PCM_OUT] = {
+		.name		= "pcm-out",
+		.channels	= MAP(S3C2443_DMAREQSEL_PCMOUT),
+		.hw_addr.to	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+	},
+	[DMACH_MIC_IN] = {
+		.name		= "mic-in",
+		.channels	= MAP(S3C2443_DMAREQSEL_MICIN),
+		.hw_addr.from	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+	},
+};
+
+static void s3c2443_dma_select(struct s3c2410_dma_chan *chan,
+			       struct s3c24xx_dma_map *map)
+{
+	writel(map->channels[0] | S3C2443_DMAREQSEL_HW,
+	       chan->regs + S3C2443_DMA_DMAREQSEL);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
+	.select		= s3c2443_dma_select,
+	.dcon_mask	= 0,
+	.map		= s3c2443_dma_mappings,
+	.map_size	= ARRAY_SIZE(s3c2443_dma_mappings),
+};
+
+static int s3c2443_dma_add(struct sys_device *sysdev)
+{
+	s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
+	return s3c24xx_dma_init_map(&s3c2443_dma_sel);
+}
+
+static struct sysdev_driver s3c2443_dma_driver = {
+	.add	= s3c2443_dma_add,
+};
+
+static int __init s3c2443_dma_init(void)
+{
+	return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver);
+}
+
+arch_initcall(s3c2443_dma_init);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
new file mode 100644
index 000000000000..756573595b88
--- /dev/null
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -0,0 +1,290 @@
+/* linux/arch/arm/mach-s3c2443/irq.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
+{
+	unsigned int subsrc, submsk;
+	unsigned int end;
+	struct irq_desc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc  &= ~submsk;
+	subsrc >>= (irq - S3C2410_IRQSUB(0));
+	subsrc  &= (1 << len)-1;
+
+	end = len + irq;
+	mydesc = irq_desc + irq;
+
+	for (; irq < end && subsrc; irq++) {
+		if (subsrc & 1)
+			desc_handle_irq(irq, mydesc);
+
+		mydesc++;
+		subsrc >>= 1;
+	}
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2443_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2443_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2443_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2443_irq_wdtac97 = {
+	.mask	    = s3c2443_irq_wdtac97_mask,
+	.unmask	    = s3c2443_irq_wdtac97_unmask,
+	.ack	    = s3c2443_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2443_irq_lcd_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2443_irq_lcd = {
+	.mask	    = s3c2443_irq_lcd_mask,
+	.unmask	    = s3c2443_irq_lcd_unmask,
+	.ack	    = s3c2443_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
+}
+
+#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2443_irq_dma_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2443_irq_dma_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2443_irq_dma_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2443_irq_dma = {
+	.mask	    = s3c2443_irq_dma_mask,
+	.unmask	    = s3c2443_irq_dma_unmask,
+	.ack	    = s3c2443_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2443_irq_uart3_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2443_irq_uart3 = {
+	.mask	    = s3c2443_irq_uart3_mask,
+	.unmask	    = s3c2443_irq_uart3_unmask,
+	.ack	    = s3c2443_irq_uart3_ack,
+};
+
+
+/* CAM sub interrupts */
+
+static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
+}
+
+#define INTMSK_CAM	(1UL << (IRQ_CAM - IRQ_EINT0))
+#define SUBMSK_CAM	INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
+
+static void s3c2443_irq_cam_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static void s3c2443_irq_cam_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void s3c2443_irq_cam_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static struct irq_chip s3c2443_irq_cam = {
+	.mask	    = s3c2443_irq_cam_mask,
+	.unmask	    = s3c2443_irq_cam_unmask,
+	.ack	    = s3c2443_irq_cam_ack,
+};
+
+/* IRQ initialisation code */
+
+static int __init s3c2443_add_sub(unsigned int base,
+				   void (*demux)(unsigned int,
+						 struct irq_desc *),
+				   struct irq_chip *chip,
+				   unsigned int start, unsigned int end)
+{
+	unsigned int irqno;
+
+	set_irq_chip(base, &s3c_irq_level_chip);
+	set_irq_handler(base, handle_level_irq);
+	set_irq_chained_handler(base, demux);
+
+	for (irqno = start; irqno <= end; irqno++) {
+		set_irq_chip(irqno, chip);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static int s3c2443_irq_add(struct sys_device *sysdev)
+{
+	printk("S3C2443: IRQ Support\n");
+
+	s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
+			IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
+
+	s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
+			IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
+
+	s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
+			&s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+	s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
+			&s3c2443_irq_uart3,
+			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+	s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
+			&s3c2443_irq_wdtac97,
+			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2443_irq_driver = {
+	.add		= s3c2443_irq_add,
+};
+
+static int s3c2443_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver);
+}
+
+arch_initcall(s3c2443_irq_init);
+
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
new file mode 100644
index 000000000000..e82aaff7dee4
--- /dev/null
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -0,0 +1,137 @@
+/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2443/
+ *
+ * Thanks to Samsung for the loan of an SMDK2443
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2443_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x43,
+		.ufcon	     = 0x51,
+	}
+};
+
+static struct platform_device *smdk2443_devices[] __initdata = {
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+};
+
+static struct s3c24xx_board smdk2443_board __initdata = {
+	.devices       = smdk2443_devices,
+	.devices_count = ARRAY_SIZE(smdk2443_devices)
+};
+
+static void __init smdk2443_map_io(void)
+{
+	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+	s3c24xx_set_board(&smdk2443_board);
+}
+
+static void __init smdk2443_machine_init(void)
+{
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2443, "SMDK2443")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2443_map_io,
+	.init_machine	= smdk2443_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
new file mode 100644
index 000000000000..11b1d0b310c3
--- /dev/null
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s3c2443/s3c2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2443 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+#include <asm/arch/reset.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc s3c2443_iodesc[] __initdata = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2443_sysclass = {
+	set_kset_name("s3c2443-core"),
+};
+
+static struct sys_device s3c2443_sysdev = {
+	.cls		= &s3c2443_sysclass,
+};
+
+static void s3c2443_hard_reset(void)
+{
+	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2443_init(void)
+{
+	printk("S3C2443: Initialising architecture\n");
+
+	s3c24xx_reset_hook = s3c2443_hard_reset;
+
+	s3c_device_nand.name = "s3c2412-nand";
+
+	return sysdev_register(&s3c2443_sysdev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+	iotable_init(mach_desc, mach_size);
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+	return sysdev_class_register(&s3c2443_sysclass);
+}
+
+core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e510295c2580..9e13c8358ea7 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -27,6 +27,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/irq.h>
+#include <asm/gpio.h>
 
 #include "generic.h"
 
@@ -138,6 +139,37 @@ unsigned long long sched_clock(void)
 	return v;
 }
 
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long flags;
+
+	if (gpio > GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	GPDR &= ~GPIO_GPIO(gpio);
+	local_irq_restore(flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	if (gpio > GPIO_MAX)
+		return -EINVAL;
+
+	local_irq_save(flags);
+	gpio_set_value(gpio, value);
+	GPDR |= GPIO_GPIO(gpio);
+	local_irq_restore(flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(gpio_direction_output);
+
 /*
  * Default power-off for SA1100
  */
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 54ecdaa373d6..64067cd58d36 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -231,12 +231,6 @@ static struct platform_device *devices[] __initdata = {
 	&s1d13xxxfb_device,
 };
 
-/* a stub for now, we theoretically cannot suspend without a flashboard */
-int pm_suspend(suspend_state_t state)
-{
-	return -1;
-}
-
 static int __init jornada720_init(void)
 {
 	int ret = -ENODEV;
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 786c8534231f..d674cf343156 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -59,9 +59,6 @@ static int sa11x0_pm_enter(suspend_state_t state)
 	unsigned long gpio, sleep_save[SLEEP_SAVE_SIZE];
 	struct timespec delta, rtc;
 
-	if (state != PM_SUSPEND_MEM)
-		return -EINVAL;
-
 	/* preserve current time */
 	rtc.tv_sec = RCNR;
 	rtc.tv_nsec = 0;
@@ -134,12 +131,9 @@ unsigned long sleep_phys_sp(void *sp)
 	return virt_to_phys(sp);
 }
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
 static struct pm_ops sa11x0_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
 	.enter		= sa11x0_pm_enter,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init sa11x0_pm_init(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index aade2f72c920..e684e9b38216 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
@@ -525,7 +525,7 @@ config CPU_BIG_ENDIAN
 	  of your chipset/board/processor.
 
 config CPU_HIGH_VECTOR
-	depends !MMU && CPU_CP15 && !CPU_ARM740T
+	depends on !MMU && CPU_CP15 && !CPU_ARM740T
 	bool "Select the High exception vector"
 	default n
 	help
@@ -609,3 +609,10 @@ config NEEDS_SYSCALL_FOR_CMPXCHG
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config OUTER_CACHE
+	bool
+	default n
+
+config CACHE_L2X0
+	bool
+	select OUTER_CACHE
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index d2f5672ecf62..2f8b95947774 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -66,3 +66,5 @@ obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
 obj-$(CONFIG_CPU_XSC3)		+= proc-xsc3.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
+
+obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
new file mode 100644
index 000000000000..08a36f1b35d2
--- /dev/null
+++ b/arch/arm/mm/cache-l2x0.c
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define CACHE_LINE_SIZE		32
+
+static void __iomem *l2x0_base;
+
+static inline void sync_writel(unsigned long val, unsigned long reg,
+			       unsigned long complete_mask)
+{
+	writel(val, l2x0_base + reg);
+	/* wait for the operation to complete */
+	while (readl(l2x0_base + reg) & complete_mask)
+		;
+}
+
+static inline void cache_sync(void)
+{
+	sync_writel(0, L2X0_CACHE_SYNC, 1);
+}
+
+static inline void l2x0_inv_all(void)
+{
+	/* invalidate all ways */
+	sync_writel(0xff, L2X0_INV_WAY, 0xff);
+	cache_sync();
+}
+
+static void l2x0_inv_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+		sync_writel(addr, L2X0_INV_LINE_PA, 1);
+	cache_sync();
+}
+
+static void l2x0_clean_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+		sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
+	cache_sync();
+}
+
+static void l2x0_flush_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+		sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
+	cache_sync();
+}
+
+void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
+{
+	__u32 aux;
+
+	l2x0_base = base;
+
+	/* disable L2X0 */
+	writel(0, l2x0_base + L2X0_CTRL);
+
+	aux = readl(l2x0_base + L2X0_AUX_CTRL);
+	aux &= aux_mask;
+	aux |= aux_val;
+	writel(aux, l2x0_base + L2X0_AUX_CTRL);
+
+	l2x0_inv_all();
+
+	/* enable L2X0 */
+	writel(1, l2x0_base + L2X0_CTRL);
+
+	outer_cache.inv_range = l2x0_inv_range;
+	outer_cache.clean_range = l2x0_clean_range;
+	outer_cache.flush_range = l2x0_flush_range;
+
+	printk(KERN_INFO "L2X0 cache controller enabled\n");
+}
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 6a9c362fef5e..1f9f94f9af4b 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -205,9 +205,10 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	 * kernel direct-mapped region for device DMA.
 	 */
 	{
-		unsigned long kaddr = (unsigned long)page_address(page);
-		memset(page_address(page), 0, size);
-		dmac_flush_range(kaddr, kaddr + size);
+		void *ptr = page_address(page);
+		memset(ptr, 0, size);
+		dmac_flush_range(ptr, ptr + size);
+		outer_flush_range(__pa(ptr), __pa(ptr) + size);
 	}
 
 	/*
@@ -480,20 +481,24 @@ core_initcall(consistent_init);
  * platforms with CONFIG_DMABOUNCE.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
-void consistent_sync(void *vaddr, size_t size, int direction)
+void consistent_sync(const void *start, size_t size, int direction)
 {
-	unsigned long start = (unsigned long)vaddr;
-	unsigned long end   = start + size;
+	const void *end = start + size;
+
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
 		dmac_inv_range(start, end);
+		outer_inv_range(__pa(start), __pa(end));
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
 		dmac_clean_range(start, end);
+		outer_clean_range(__pa(start), __pa(end));
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
 		dmac_flush_range(start, end);
+		outer_flush_range(__pa(start), __pa(end));
 		break;
 	default:
 		BUG();
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 79e800202424..9da43a0fdcdf 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -19,7 +19,8 @@ unsigned int cpu_last_asid = { 1 << ASID_BITS };
 /*
  * We fork()ed a process, and we need a new context for the child
  * to run in.  We reserve version 0 for initial tasks so we will
- * always allocate an ASID.
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
  */
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -38,8 +39,15 @@ void __new_context(struct mm_struct *mm)
 	 * If we've used up all our ASIDs, we need
 	 * to start a new version and flush the TLB.
 	 */
-	if ((asid & ~ASID_MASK) == 0)
+	if ((asid & ~ASID_MASK) == 0) {
+		asid = ++cpu_last_asid;
+		/* set the reserved ASID before flushing the TLB */
+		asm("mcr	p15, 0, %0, c13, c0, 1	@ set reserved context ID\n"
+		    :
+		    : "r" (0));
+		isb();
 		flush_tlb_all();
+	}
 
 	mm->context.id = asid;
 }
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index cf95c5d0ce4c..44558d5f9313 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -119,8 +119,6 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigne
 		flush_cache_page(vma, addr, pfn);
 }
 
-void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
 /*
  * Take care of architecture specific things when placing a new PTE into
  * a page table, or changing an existing PTE.  Basically, there are two
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 655c8376f0b5..94fd4bf5cb9e 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -49,8 +49,10 @@ pmd_t *top_pmd;
 
 static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
 static unsigned int ecc_mask __initdata = 0;
+pgprot_t pgprot_user;
 pgprot_t pgprot_kernel;
 
+EXPORT_SYMBOL(pgprot_user);
 EXPORT_SYMBOL(pgprot_kernel);
 
 struct cachepolicy {
@@ -345,6 +347,7 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
 	}
 
+	pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
 				 L_PTE_DIRTY | L_PTE_WRITE |
 				 L_PTE_EXEC | kern_pgprot);
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7b1843befb9c..eb42e5b94863 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -14,10 +14,13 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware/arm_scu.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
+#ifdef CONFIG_SMP
+#include <asm/hardware/arm_scu.h>
+#endif
+
 #include "proc-macros.S"
 
 #define D_CACHE_LINE_SIZE	32
@@ -30,6 +33,12 @@
 #define TTB_RGN_WT	(2 << 3)
 #define TTB_RGN_WB	(3 << 3)
 
+#ifndef CONFIG_SMP
+#define TTB_FLAGS	TTB_RGN_WBWA
+#else
+#define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
+#endif
+
 ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
 
@@ -92,9 +101,7 @@ ENTRY(cpu_v6_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-#ifdef CONFIG_SMP
-	orr	r0, r0, #TTB_RGN_WBWA|TTB_S	@ mark PTWs shared, outer cacheable
-#endif
+	orr	r0, r0, #TTB_FLAGS
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -183,8 +190,7 @@ __v6_setup:
 	/* Set up the SCU on core 0 only */
 	mrc	p15, 0, r0, c0, c0, 5		@ CPU core number
 	ands	r0, r0, #15
-	moveq	r0, #0x10000000 @ SCU_BASE
-	orreq	r0, r0, #0x00100000
+	ldreq	r0, =SCU_BASE
 	ldreq	r5, [r0, #SCU_CTRL]
 	orreq	r5, r5, #1
 	streq	r5, [r0, #SCU_CTRL]
@@ -204,9 +210,7 @@ __v6_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
-#ifdef CONFIG_SMP
-	orr	r4, r4, #TTB_RGN_WBWA|TTB_S	@ mark PTWs shared, outer cacheable
-#endif
+	orr	r4, r4, #TTB_FLAGS
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 94a58455f346..d95921a2ab99 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -5,23 +5,23 @@
  * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
  *
  * Copyright 2004 (C) Intel Corp.
- * Copyright 2005 (c) MontaVista Software, Inc.
+ * Copyright 2005 (C) MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is an
- * extension to Intel's original XScale core that adds the following
+ * MMU functions for the Intel XScale3 Core (XSC3).  The XSC3 core is
+ * an extension to Intel's original XScale core that adds the following
  * features:
  *
  * - ARMv6 Supersections
  * - Low Locality Reference pages (replaces mini-cache)
  * - 36-bit addressing
  * - L2 cache
- * - Cache-coherency if chipset supports it
+ * - Cache coherency if chipset supports it
  *
- * Based on orignal XScale code by Nicolas Pitre
+ * Based on original XScale code by Nicolas Pitre.
  */
 
 #include <linux/linkage.h>
@@ -42,12 +42,12 @@
 #define MAX_AREA_SIZE	32768
 
 /*
- * The cache line size of the I and D cache.
+ * The cache line size of the L1 I, L1 D and unified L2 cache.
  */
 #define CACHELINESIZE	32
 
 /*
- * The size of the data cache.
+ * The size of the L1 D cache.
  */
 #define CACHESIZE	32768
 
@@ -57,9 +57,9 @@
 #define L2_CACHE_ENABLE	1
 
 /*
- * This macro is used to wait for a CP15 write and is needed
- * when we have to ensure that the last operation to the co-pro
- * was completed before continuing with operation.
+ * This macro is used to wait for a CP15 write and is needed when we
+ * have to ensure that the last operation to the coprocessor was
+ * completed before continuing with operation.
  */
 	.macro	cpwait_ret, lr, rd
 	mrc	p15, 0, \rd, c2, c0, 0		@ arbitrary read of cp15
@@ -68,13 +68,13 @@
 	.endm
 
 /*
- * This macro cleans & invalidates the entire xsc3 dcache by set & way.
+ * This macro cleans and invalidates the entire L1 D cache.
  */
 
  	.macro  clean_d_cache rd, rs
 	mov	\rd, #0x1f00
 	orr	\rd, \rd, #0x00e0
-1:	mcr	p15, 0, \rd, c7, c14, 2		@ clean/inv set/way
+1:	mcr	p15, 0, \rd, c7, c14, 2		@ clean/invalidate L1 D line
 	adds	\rd, \rd, #0x40000000
 	bcc	1b
 	subs	\rd, \rd, #0x20
@@ -119,15 +119,15 @@ ENTRY(cpu_xsc3_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
-	bic	r1, r1, #0x0086			@ ........B....CA.
 	bic	r1, r1, #0x3900			@ ..VIZ..S........
+	bic	r1, r1, #0x0086			@ ........B....CA.
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate L1 caches and BTB
 	bic	r1, r1, #0x0001			@ ...............M
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
 	@ CAUTION: MMU turned off from this point.  We count on the pipeline
 	@ already containing those two last instructions to survive.
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	mov	pc, r0
 
 /*
@@ -139,14 +139,12 @@ ENTRY(cpu_xsc3_reset)
  *
  * XScale supports clock switching, but using idle mode support
  * allows external hardware to react to system state changes.
-
- MMG: Come back to this one.
  */
 	.align	5
 
 ENTRY(cpu_xsc3_do_idle)
 	mov	r0, #1
-	mcr	p14, 0, r0, c7, c0, 0		@ Go to IDLE
+	mcr	p14, 0, r0, c7, c0, 0		@ go to idle
 	mov	pc, lr
 
 /* ================================= CACHE ================================ */
@@ -171,9 +169,9 @@ ENTRY(xsc3_flush_kern_cache_all)
 __flush_whole_cache:
 	clean_d_cache r0, r1
 	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcrne	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
@@ -194,21 +192,21 @@ ENTRY(xsc3_flush_user_cache_range)
 	bhs	__flush_whole_cache
 
 1:	tst	r2, #VM_EXEC
-	mcrne	p15, 0, r0, c7, c5, 1		@ Invalidate I cache line
-	mcr	p15, 0, r0, c7, c14, 1		@ Clean/invalidate D cache line
+	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate L1 I line
+	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
 	tst	r2, #VM_EXEC
-	mcrne	p15, 0, ip, c7, c5, 6		@ Invalidate BTB
-	mcrne	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcrne	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcrne	p15, 0, ip, c7, c5, 6		@ invalidate BTB
+	mcrne	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcrne	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
  *	coherent_kern_range(start, end)
  *
- *	Ensure coherency between the Icache and the Dcache in the
+ *	Ensure coherency between the I cache and the D cache in the
  *	region described by start.  If you have non-snooping
  *	Harvard caches, you need to implement this function.
  *
@@ -222,34 +220,34 @@ ENTRY(xsc3_coherent_kern_range)
 /* FALLTHROUGH */
 ENTRY(xsc3_coherent_user_range)
 	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, r0, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
  *	flush_kern_dcache_page(void *page)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
- *	the I cache
+ *	the I cache.
  *
  *	- addr	- page aligned address
  */
 ENTRY(xsc3_flush_kern_dcache_page)
 	add	r1, r0, #PAGE_SZ
-1:	mcr	p15, 0, r0, c7, c14, 1		@ Clean/Invalidate D Cache line
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, r0, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, r0, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 /*
@@ -266,17 +264,17 @@ ENTRY(xsc3_flush_kern_dcache_page)
 ENTRY(xsc3_dma_inv_range)
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D entry
-	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 D entry
+	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	tst	r1, #CACHELINESIZE - 1
-	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D entry
-	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 D entry
-1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D entry
-	mcr	p15, 1, r0, c7, c7, 1		@ Invalidate L2 D cache line
+	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
+	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 line
+1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
+	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 /*
@@ -289,12 +287,12 @@ ENTRY(xsc3_dma_inv_range)
  */
 ENTRY(xsc3_dma_clean_range)
 	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D entry
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 D entry
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 /*
@@ -307,13 +305,13 @@ ENTRY(xsc3_dma_clean_range)
  */
 ENTRY(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
-1:	mcr	p15, 0, r0, c7, c14, 1	@ Clean/invalidate L1 D cache line
-	mcr	p15, 1, r0, c7, c11, 1	@ Clean L2 D cache line
-	mcr	p15, 1, r0, c7, c7, 1	@ Invalidate L2 D cache line
+1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
+	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
+	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
-	mcr	p15, 0, r0, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 ENTRY(xsc3_cache_fns)
@@ -328,7 +326,7 @@ ENTRY(xsc3_cache_fns)
 	.long	xsc3_dma_flush_range
 
 ENTRY(cpu_xsc3_dcache_clean_area)
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
+1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	add	r0, r0, #CACHELINESIZE
 	subs	r1, r1, #CACHELINESIZE
 	bhi	1b
@@ -346,14 +344,14 @@ ENTRY(cpu_xsc3_dcache_clean_area)
 	.align	5
 ENTRY(cpu_xsc3_switch_mm)
 	clean_d_cache r1, r2
-	mcr	p15, 0, ip, c7, c5, 0		@ Invalidate I cache & BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
+	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
 #ifdef L2_CACHE_ENABLE
 	orr	r0, r0, #0x18			@ cache the page table in L2
 #endif
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
 
 /*
@@ -366,34 +364,34 @@ ENTRY(cpu_xsc3_switch_mm)
 ENTRY(cpu_xsc3_set_pte_ext)
 	str	r1, [r0], #-2048		@ linux version
 
-	bic	r2, r1, #0xff0			@ Keep C, B bits
+	bic	r2, r1, #0xff0			@ keep C, B bits
 	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
-	tst	r1, #L_PTE_SHARED		@ Shared?
+	tst	r1, #L_PTE_SHARED		@ shared?
 	orrne	r2, r2, #0x200
 
 	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
 
-	tst	r3, #L_PTE_USER			@ User?
+	tst	r3, #L_PTE_USER			@ user?
 	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
 
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 
 #if L2_CACHE_ENABLE
-	@ If its cacheable it needs to be in L2 also.
+	@ If it's cacheable, it needs to be in L2 also.
 	eor	ip, r1, #L_PTE_CACHEABLE
 	tst	ip, #L_PTE_CACHEABLE
 	orreq	r2, r2, #PTE_EXT_TEX(0x5)
 #endif
 
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
 
 	str	r2, [r0]			@ hardware version
 	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line mcr
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
+	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mov	pc, lr
 
 	.ltorg
@@ -406,17 +404,18 @@ ENTRY(cpu_xsc3_set_pte_ext)
 __xsc3_setup:
 	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I, D caches & BTB
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write Buffer
-	mcr	p15, 0, ip, c7, c5, 4		@ Prefetch Flush
-	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I, D TLBs
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate L1 caches and BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
+	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 #if L2_CACHE_ENABLE
 	orr	r4, r4, #0x18			@ cache the page table in L2
 #endif
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-	mov	r0, #1				@ Allow access to CP0 and CP13
-	orr	r0, r0, #1 << 13		@ Its undefined whether this
-	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
+
+	mov	r0, #0				@ don't allow CP access
+	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
+
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
 	and	r0, r0, #2			@ preserve bit P bit setting
 #if L2_CACHE_ENABLE
@@ -427,9 +426,9 @@ __xsc3_setup:
 	adr	r5, xsc3_crval
 	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, r5			@ .... .... .... ..A.
-	orr	r0, r0, r6			@ .... .... .... .C.M
-	orr	r0, r0, #0x00000800		@ ..VI Z..S .... ....
+	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
+	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
+						@ ...I Z..S .... .... (uc)
 #if L2_CACHE_ENABLE
 	orr 	r0, r0, #0x04000000		@ L2 enable
 #endif
@@ -439,7 +438,7 @@ __xsc3_setup:
 
 	.type	xsc3_crval, #object
 xsc3_crval:
-	crval	clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+	crval	clear=0x04002202, mmuset=0x00003905, ucset=0x00001900
 
 	__INITDATA
 
@@ -474,7 +473,7 @@ cpu_elf_name:
 
 	.type	cpu_xsc3_name, #object
 cpu_xsc3_name:
-	.asciz	"XScale-Core3"
+	.asciz	"XScale-V3 based processor"
 	.size	cpu_xsc3_name, . - cpu_xsc3_name
 
 	.align
@@ -490,7 +489,7 @@ __xsc3_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	.long   PMD_TYPE_SECT | \
+	.long	PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
 	b	__xsc3_setup
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index fd6adde39091..20f84bbaa9bb 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -53,6 +53,8 @@ ENTRY(v6wbi_flush_user_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
+	mcr	p15, 0, ip, c7, c10, 4		@ data synchronization barrier
 	mov	pc, lr
 
 /*
@@ -80,7 +82,9 @@ ENTRY(v6wbi_flush_kern_tlb_range)
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
+	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ data synchronization barrier
+	mcr	p15, 0, r2, c7, c5, 4		@ prefetch flush
 	mov	pc, lr
 
 	.section ".text.init", #alloc, #execinstr
diff --git a/arch/arm/oprofile/Kconfig b/arch/arm/oprofile/Kconfig
index 19d37730b664..afd93ad02feb 100644
--- a/arch/arm/oprofile/Kconfig
+++ b/arch/arm/oprofile/Kconfig
@@ -19,5 +19,24 @@ config OPROFILE
 
 	  If unsure, say N.
 
+if OPROFILE
+
+config OPROFILE_ARMV6
+	bool
+	depends on CPU_V6 && !SMP
+	default y
+	select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+	bool
+	depends on CPU_V6 && SMP
+	default y
+	select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+	bool
+
+endif
+
 endmenu
 
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 6a94e54848fd..e61d0cc520b7 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -8,4 +8,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 
 oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
 oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
-
+oprofile-$(CONFIG_OPROFILE_ARM11_CORE)	+= op_model_arm11_core.o
+oprofile-$(CONFIG_OPROFILE_ARMV6)	+= op_model_v6.o
+oprofile-$(CONFIG_OPROFILE_MPCORE)	+= op_model_mpcore.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 6f833358cd06..a9de727c9327 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -131,10 +131,20 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	struct op_arm_model_spec *spec = NULL;
 	int ret = -ENODEV;
 
+	ops->backtrace = arm_backtrace;
+
 #ifdef CONFIG_CPU_XSCALE
 	spec = &op_xscale_spec;
 #endif
 
+#ifdef CONFIG_OPROFILE_ARMV6
+	spec = &op_armv6_spec;
+#endif
+
+#ifdef CONFIG_OPROFILE_MPCORE
+	spec = &op_mpcore_spec;
+#endif
+
 	if (spec) {
 		ret = spec->init();
 		if (ret < 0)
@@ -153,7 +163,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 		ops->start = op_arm_start;
 		ops->stop = op_arm_stop;
 		ops->cpu_type = op_arm_model->name;
-		ops->backtrace = arm_backtrace;
 		printk(KERN_INFO "oprofile: using %s\n", spec->name);
 	}
 
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 38c6ad158547..4899c629aa03 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -24,6 +24,9 @@ struct op_arm_model_spec {
 extern struct op_arm_model_spec op_xscale_spec;
 #endif
 
+extern struct op_arm_model_spec op_armv6_spec;
+extern struct op_arm_model_spec op_mpcore_spec;
+
 extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
 
 extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c
new file mode 100644
index 000000000000..ad80752cb9fb
--- /dev/null
+++ b/arch/arm/oprofile/op_model_arm11_core.c
@@ -0,0 +1,162 @@
+/**
+ * @file op_model_arm11_core.c
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+/*
+ * ARM11 PMU support
+ */
+static inline void arm11_write_pmnc(u32 val)
+{
+	/* upper 4bits and 7, 11 are write-as-0 */
+	val &= 0x0ffff77f;
+	asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
+}
+
+static inline u32 arm11_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
+	return val;
+}
+
+static void arm11_reset_counter(unsigned int cnt)
+{
+	u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
+	switch (cnt) {
+	case CCNT:
+		asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
+		break;
+
+	case PMN0:
+		asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
+		break;
+
+	case PMN1:
+		asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
+		break;
+	}
+}
+
+int arm11_setup_pmu(void)
+{
+	unsigned int cnt;
+	u32 pmnc;
+
+	if (arm11_read_pmnc() & PMCR_E) {
+		printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
+		return -EBUSY;
+	}
+
+	/* initialize PMNC, reset overflow, D bit, C bit and P bit. */
+	arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
+			 PMCR_C | PMCR_P);
+
+	for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
+		unsigned long event;
+
+		if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
+			continue;
+
+		event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
+
+		/*
+		 * Set event (if destined for PMNx counters)
+		 */
+		if (cnt == PMN0) {
+			pmnc |= event << 20;
+		} else if (cnt == PMN1) {
+			pmnc |= event << 12;
+		}
+
+		/*
+		 * We don't need to set the event if it's a cycle count
+		 * Enable interrupt for this counter
+		 */
+		pmnc |= PMCR_IEN_PMN0 << cnt;
+		arm11_reset_counter(cnt);
+	}
+	arm11_write_pmnc(pmnc);
+
+	return 0;
+}
+
+int arm11_start_pmu(void)
+{
+	arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
+	return 0;
+}
+
+int arm11_stop_pmu(void)
+{
+	unsigned int cnt;
+
+	arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
+
+	for (cnt = PMN0; cnt <= CCNT; cnt++)
+		arm11_reset_counter(cnt);
+
+	return 0;
+}
+
+/*
+ * CPU counters' IRQ handler (one IRQ per CPU)
+ */
+static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
+{
+	struct pt_regs *regs = get_irq_regs();
+	unsigned int cnt;
+	u32 pmnc;
+
+	pmnc = arm11_read_pmnc();
+
+	for (cnt = PMN0; cnt <= CCNT; cnt++) {
+		if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
+			arm11_reset_counter(cnt);
+			oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
+		}
+	}
+	/* Clear counter flag(s) */
+	arm11_write_pmnc(pmnc);
+	return IRQ_HANDLED;
+}
+
+int arm11_request_interrupts(int *irqs, int nr)
+{
+	unsigned int i;
+	int ret = 0;
+
+	for(i = 0; i < nr; i++) {
+		ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
+		if (ret != 0) {
+			printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
+			       irqs[i]);
+			break;
+		}
+	}
+
+	if (i != nr)
+		while (i-- != 0)
+			free_irq(irqs[i], NULL);
+
+	return ret;
+}
+
+void arm11_release_interrupts(int *irqs, int nr)
+{
+	unsigned int i;
+
+	for (i = 0; i < nr; i++)
+		free_irq(irqs[i], NULL);
+}
diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h
new file mode 100644
index 000000000000..6f8538e5a960
--- /dev/null
+++ b/arch/arm/oprofile/op_model_arm11_core.h
@@ -0,0 +1,45 @@
+/**
+ * @file op_model_arm11_core.h
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_ARM11_CORE_H
+#define OP_MODEL_ARM11_CORE_H
+
+/*
+ * Per-CPU PMCR
+ */
+#define PMCR_E		(1 << 0)	/* Enable */
+#define PMCR_P		(1 << 1)	/* Count reset */
+#define PMCR_C		(1 << 2)	/* Cycle counter reset */
+#define PMCR_D		(1 << 3)	/* Cycle counter counts every 64th cpu cycle */
+#define PMCR_IEN_PMN0	(1 << 4)	/* Interrupt enable count reg 0 */
+#define PMCR_IEN_PMN1	(1 << 5)	/* Interrupt enable count reg 1 */
+#define PMCR_IEN_CCNT	(1 << 6)	/* Interrupt enable cycle counter */
+#define PMCR_OFL_PMN0	(1 << 8)	/* Count reg 0 overflow */
+#define PMCR_OFL_PMN1	(1 << 9)	/* Count reg 1 overflow */
+#define PMCR_OFL_CCNT	(1 << 10)	/* Cycle counter overflow */
+
+#define PMN0 0
+#define PMN1 1
+#define CCNT 2
+
+#define CPU_COUNTER(cpu, counter)	((cpu) * 3 + (counter))
+
+int arm11_setup_pmu(void);
+int arm11_start_pmu(void);
+int arm11_stop_pmu(void);
+int arm11_request_interrupts(int *, int);
+void arm11_release_interrupts(int *, int);
+
+#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
new file mode 100644
index 000000000000..898500718249
--- /dev/null
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -0,0 +1,296 @@
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ *
+ *  Counters:
+ *    0: PMN0 on CPU0, per-cpu configurable event counter
+ *    1: PMN1 on CPU0, per-cpu configurable event counter
+ *    2: CCNT on CPU0
+ *    3: PMN0 on CPU1
+ *    4: PMN1 on CPU1
+ *    5: CCNT on CPU1
+ *    6: PMN0 on CPU1
+ *    7: PMN1 on CPU1
+ *    8: CCNT on CPU1
+ *    9: PMN0 on CPU1
+ *   10: PMN1 on CPU1
+ *   11: CCNT on CPU1
+ *   12-19: configurable SCU event counters
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+#include "op_model_mpcore.h"
+
+/*
+ * MPCore SCU event monitor support
+ */
+#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_MPCORE_SCU_BASE + 0x10)
+
+/*
+ * Bitmask of used SCU counters
+ */
+static unsigned int scu_em_used;
+
+/*
+ * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
+ */
+static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
+{
+	writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
+}
+
+static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
+{
+	event &= 0xff;
+	writeb(event, &emc->MCEB[n]);
+}
+
+/*
+ * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
+ */
+static irqreturn_t scu_em_interrupt(int irq, void *arg)
+{
+	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+	unsigned int cnt;
+
+	cnt = irq - IRQ_PMU_SCU0;
+	oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
+	scu_reset_counter(emc, cnt);
+
+	/* Clear overflow flag for this counter */
+	writel(1 << (cnt + 16), &emc->PMCR);
+
+	return IRQ_HANDLED;
+}
+
+/* Configure just the SCU counters that the user has requested */
+static void scu_setup(void)
+{
+	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+	unsigned int i;
+
+	scu_em_used = 0;
+
+	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+		if (counter_config[SCU_COUNTER(i)].enabled &&
+		    counter_config[SCU_COUNTER(i)].event) {
+			scu_set_event(emc, i, 0); /* disable counter for now */
+			scu_em_used |= 1 << i;
+		}
+	}
+}
+
+static int scu_start(void)
+{
+	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+	unsigned int temp, i;
+	unsigned long event;
+	int ret = 0;
+
+	/*
+	 * request the SCU counter interrupts that we need
+	 */
+	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+		if (scu_em_used & (1 << i)) {
+			ret = request_irq(IRQ_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
+			if (ret) {
+				printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
+				       IRQ_PMU_SCU0 + i);
+				goto err_free_scu;
+			}
+		}
+	}
+
+	/*
+	 * clear overflow and enable interrupt for all used counters
+	 */
+	temp = readl(&emc->PMCR);
+	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+		if (scu_em_used & (1 << i)) {
+			scu_reset_counter(emc, i);
+			event = counter_config[SCU_COUNTER(i)].event;
+			scu_set_event(emc, i, event);
+
+			/* clear overflow/interrupt */
+			temp |= 1 << (i + 16);
+			/* enable interrupt*/
+			temp |= 1 << (i + 8);
+		}
+	}
+
+	/* Enable all 8 counters */
+	temp |= PMCR_E;
+	writel(temp, &emc->PMCR);
+
+	return 0;
+
+ err_free_scu:
+	while (i--)
+		free_irq(IRQ_PMU_SCU0 + i, NULL);
+	return ret;
+}
+
+static void scu_stop(void)
+{
+	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+	unsigned int temp, i;
+
+	/* Disable counter interrupts */
+	/* Don't disable all 8 counters (with the E bit) as they may be in use */
+	temp = readl(&emc->PMCR);
+	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+		if (scu_em_used & (1 << i))
+			temp &= ~(1 << (i + 8));
+	}
+	writel(temp, &emc->PMCR);
+
+	/* Free counter interrupts and reset counters */
+	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+		if (scu_em_used & (1 << i)) {
+			scu_reset_counter(emc, i);
+			free_irq(IRQ_PMU_SCU0 + i, NULL);
+		}
+	}
+}
+
+struct em_function_data {
+	int (*fn)(void);
+	int ret;
+};
+
+static void em_func(void *data)
+{
+	struct em_function_data *d = data;
+	int ret = d->fn();
+	if (ret)
+		d->ret = ret;
+}
+
+static int em_call_function(int (*fn)(void))
+{
+	struct em_function_data data;
+
+	data.fn = fn;
+	data.ret = 0;
+
+	smp_call_function(em_func, &data, 1, 1);
+	em_func(&data);
+
+	return data.ret;
+}
+
+/*
+ * Glue to stick the individual ARM11 PMUs and the SCU
+ * into the oprofile framework.
+ */
+static int em_setup_ctrs(void)
+{
+	int ret;
+
+	/* Configure CPU counters by cross-calling to the other CPUs */
+	ret = em_call_function(arm11_setup_pmu);
+	if (ret == 0)
+		scu_setup();
+
+	return 0;
+}
+
+static int arm11_irqs[] = {
+	[0]	= IRQ_PMU_CPU0,
+	[1]	= IRQ_PMU_CPU1,
+	[2]	= IRQ_PMU_CPU2,
+	[3]	= IRQ_PMU_CPU3
+};
+
+static int em_start(void)
+{
+	int ret;
+
+	ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+	if (ret == 0) {
+		em_call_function(arm11_start_pmu);
+
+		ret = scu_start();
+		if (ret)
+			arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+	}
+	return ret;
+}
+
+static void em_stop(void)
+{
+	em_call_function(arm11_stop_pmu);
+	arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+	scu_stop();
+}
+
+/*
+ * Why isn't there a function to route an IRQ to a specific CPU in
+ * genirq?
+ */
+static void em_route_irq(int irq, unsigned int cpu)
+{
+	irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+	irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu));
+}
+
+static int em_setup(void)
+{
+	/*
+	 * Send SCU PMU interrupts to the "owner" CPU.
+	 */
+	em_route_irq(IRQ_PMU_SCU0, 0);
+	em_route_irq(IRQ_PMU_SCU1, 0);
+	em_route_irq(IRQ_PMU_SCU2, 1);
+	em_route_irq(IRQ_PMU_SCU3, 1);
+	em_route_irq(IRQ_PMU_SCU4, 2);
+	em_route_irq(IRQ_PMU_SCU5, 2);
+	em_route_irq(IRQ_PMU_SCU6, 3);
+	em_route_irq(IRQ_PMU_SCU7, 3);
+
+	/*
+	 * Send CP15 PMU interrupts to the owner CPU.
+	 */
+	em_route_irq(IRQ_PMU_CPU0, 0);
+	em_route_irq(IRQ_PMU_CPU1, 1);
+	em_route_irq(IRQ_PMU_CPU2, 2);
+	em_route_irq(IRQ_PMU_CPU3, 3);
+
+	return 0;
+}
+
+struct op_arm_model_spec op_mpcore_spec = {
+	.init		= em_setup,
+	.num_counters	= MPCORE_NUM_COUNTERS,
+	.setup_ctrs	= em_setup_ctrs,
+	.start		= em_start,
+	.stop		= em_stop,
+	.name		= "arm/mpcore",
+};
diff --git a/arch/arm/oprofile/op_model_mpcore.h b/arch/arm/oprofile/op_model_mpcore.h
new file mode 100644
index 000000000000..73d811023688
--- /dev/null
+++ b/arch/arm/oprofile/op_model_mpcore.h
@@ -0,0 +1,61 @@
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_MPCORE_H
+#define OP_MODEL_MPCORE_H
+
+struct eventmonitor {
+	unsigned long PMCR;
+	unsigned char MCEB[8];
+	unsigned long MC[8];
+};
+
+/*
+ * List of userspace counter numbers: note that the structure is important.
+ * The code relies on CPUn's counters being CPU0's counters + 3n
+ * and on CPU0's counters starting at 0
+ */
+
+#define COUNTER_CPU0_PMN0 0
+#define COUNTER_CPU0_PMN1 1
+#define COUNTER_CPU0_CCNT 2
+
+#define COUNTER_CPU1_PMN0 3
+#define COUNTER_CPU1_PMN1 4
+#define COUNTER_CPU1_CCNT 5
+
+#define COUNTER_CPU2_PMN0 6
+#define COUNTER_CPU2_PMN1 7
+#define COUNTER_CPU2_CCNT 8
+
+#define COUNTER_CPU3_PMN0 9
+#define COUNTER_CPU3_PMN1 10
+#define COUNTER_CPU3_CCNT 11
+
+#define COUNTER_SCU_MN0 12
+#define COUNTER_SCU_MN1 13
+#define COUNTER_SCU_MN2 14
+#define COUNTER_SCU_MN3 15
+#define COUNTER_SCU_MN4 16
+#define COUNTER_SCU_MN5 17
+#define COUNTER_SCU_MN6 18
+#define COUNTER_SCU_MN7 19
+#define NUM_SCU_COUNTERS 8
+
+#define SCU_COUNTER(number)	((number) + COUNTER_SCU_MN0)
+
+#define MPCORE_NUM_COUNTERS	SCU_COUNTER(NUM_SCU_COUNTERS)
+
+#endif
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
new file mode 100644
index 000000000000..fe581383d3e2
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -0,0 +1,67 @@
+/**
+ * @file op_model_v6.c
+ * ARM11 Performance Monitor Driver
+ *
+ * Based on op_model_xscale.c
+ *
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 OProfile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Tony Lindgren <tony@atomide.com>
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+static int irqs[] = {
+#ifdef CONFIG_ARCH_OMAP2
+	3,
+#endif
+};
+
+static void armv6_pmu_stop(void)
+{
+	arm11_stop_pmu();
+	arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+}
+
+static int armv6_pmu_start(void)
+{
+	int ret;
+
+	ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
+	if (ret >= 0)
+		ret = arm11_start_pmu();
+
+	return ret;
+}
+
+static int armv6_detect_pmu(void)
+{
+	return 0;
+}
+
+struct op_arm_model_spec op_armv6_spec = {
+	.init		= armv6_detect_pmu,
+	.num_counters	= 3,
+	.setup_ctrs	= arm11_setup_pmu,
+	.start		= armv6_pmu_start,
+	.stop		= armv6_pmu_stop,
+	.name		= "arm/armv6",
+};
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 23da00b11517..4d2b1da3cd82 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -2,7 +2,30 @@
 # Makefile for the linux kernel.
 #
 
-obj-y			:= gpio.o i2c.o pci.o setup.o time.o
-obj-m			:=
-obj-n			:=
-obj-			:=
+obj-y :=
+
+# IOP32X
+obj-$(CONFIG_ARCH_IOP32X) += gpio.o
+obj-$(CONFIG_ARCH_IOP32X) += i2c.o
+obj-$(CONFIG_ARCH_IOP32X) += pci.o
+obj-$(CONFIG_ARCH_IOP32X) += setup.o
+obj-$(CONFIG_ARCH_IOP32X) += time.o
+obj-$(CONFIG_ARCH_IOP32X) += io.o
+obj-$(CONFIG_ARCH_IOP32X) += cp6.o
+
+# IOP33X
+obj-$(CONFIG_ARCH_IOP33X) += gpio.o
+obj-$(CONFIG_ARCH_IOP33X) += i2c.o
+obj-$(CONFIG_ARCH_IOP33X) += pci.o
+obj-$(CONFIG_ARCH_IOP33X) += setup.o
+obj-$(CONFIG_ARCH_IOP33X) += time.o
+obj-$(CONFIG_ARCH_IOP33X) += io.o
+obj-$(CONFIG_ARCH_IOP33X) += cp6.o
+
+# IOP13XX
+obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
+obj-$(CONFIG_ARCH_IOP13XX) += time.o
+
+obj-m                  :=
+obj-n                  :=
+obj-                   :=
diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c
new file mode 100644
index 000000000000..9612a87e2a88
--- /dev/null
+++ b/arch/arm/plat-iop/cp6.c
@@ -0,0 +1,50 @@
+/*
+ * IOP Coprocessor-6 access handler
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/init.h>
+#include <asm/traps.h>
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+	u32 temp;
+
+        /* enable cp6 access */
+        asm volatile (
+		"mrc	p15, 0, %0, c15, c1, 0\n\t"
+		"orr	%0, %0, #(1 << 6)\n\t"
+		"mcr	p15, 0, %0, c15, c1, 0\n\t"
+		: "=r"(temp));
+
+	return 0;
+}
+
+/* permit kernel space cp6 access
+ * deny user space cp6 access
+ */
+static struct undef_hook cp6_hook = {
+	.instr_mask     = 0x0f000ff0,
+	.instr_val      = 0x0e000610,
+	.cpsr_mask      = MODE_MASK,
+	.cpsr_val       = SVC_MODE,
+	.fn             = cp6_trap,
+};
+
+void __init iop_init_cp6_handler(void)
+{
+	register_undef_hook(&cp6_hook);
+}
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
new file mode 100644
index 000000000000..f7eccecf2e47
--- /dev/null
+++ b/arch/arm/plat-iop/io.c
@@ -0,0 +1,58 @@
+/*
+ * iop3xx custom ioremap implementation
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned long flags)
+{
+	void __iomem * retval;
+
+	switch (cookie) {
+	case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
+		retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
+		break;
+	case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
+		retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
+		break;
+	default:
+		retval = __ioremap(cookie, size, flags);
+	}
+
+	return retval;
+}
+EXPORT_SYMBOL(__iop3xx_ioremap);
+
+void __iop3xx_iounmap(void __iomem *addr)
+{
+	extern void __iounmap(volatile void __iomem *addr);
+
+	switch ((u32) addr) {
+	case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
+	case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
+		goto skip;
+	}
+	__iounmap(addr);
+
+skip:
+	return;
+}
+EXPORT_SYMBOL(__iop3xx_iounmap);
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index e647812654f2..b5f6ec35aafb 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -196,8 +196,8 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 	if (!res)
 		panic("PCI: unable to alloc resources");
 
-	res[0].start = IOP3XX_PCI_LOWER_IO_VA;
-	res[0].end   = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
+	res[0].start = IOP3XX_PCI_LOWER_IO_PA;
+	res[0].end   = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
 	res[0].name  = "IOP3XX PCI I/O Space";
 	res[0].flags = IORESOURCE_IO;
 	request_resource(&ioport_resource, &res[0]);
@@ -209,7 +209,7 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 	request_resource(&iomem_resource, &res[1]);
 
 	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA;
-	sys->io_offset  = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA;
+	sys->io_offset  = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA;
 
 	sys->resource[0] = &res[0];
 	sys->resource[1] = &res[1];
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index f530abdaa7a1..16300adfb4de 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -24,39 +24,45 @@
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-
-#ifdef CONFIG_ARCH_IOP32X
-#define IRQ_IOP3XX_TIMER0	IRQ_IOP32X_TIMER0
-#else
-#ifdef CONFIG_ARCH_IOP33X
-#define IRQ_IOP3XX_TIMER0	IRQ_IOP33X_TIMER0
-#endif
-#endif
+#include <asm/arch/time.h>
 
 static unsigned long ticks_per_jiffy;
 static unsigned long ticks_per_usec;
 static unsigned long next_jiffy_time;
 
-unsigned long iop3xx_gettimeoffset(void)
+unsigned long iop_gettimeoffset(void)
 {
-	unsigned long offset;
+	unsigned long offset, temp1, temp2;
 
-	offset = next_jiffy_time - *IOP3XX_TU_TCR1;
+	/* enable cp6, if necessary, to avoid taking the overhead of an
+	 * undefined instruction trap
+	 */
+	asm volatile (
+	"mrc	p15, 0, %0, c15, c1, 0\n\t"
+	"ands	%1, %0, #(1 << 6)\n\t"
+	"orreq	%0, %0, #(1 << 6)\n\t"
+	"mcreq	p15, 0, %0, c15, c1, 0\n\t"
+#ifdef CONFIG_XSCALE
+	"mrceq	p15, 0, %0, c15, c1, 0\n\t"
+	"moveq	%0, %0\n\t"
+	"subeq	pc, pc, #4\n\t"
+#endif
+	: "=r"(temp1), "=r"(temp2) : : "cc");
+
+	offset = next_jiffy_time - read_tcr1();
 
 	return offset / ticks_per_usec;
 }
 
 static irqreturn_t
-iop3xx_timer_interrupt(int irq, void *dev_id)
+iop_timer_interrupt(int irq, void *dev_id)
 {
 	write_seqlock(&xtime_lock);
 
-	iop3xx_cp6_enable();
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (1));
-	iop3xx_cp6_disable();
+	write_tisr(1);
 
-	while ((signed long)(next_jiffy_time - *IOP3XX_TU_TCR1)
-							>= ticks_per_jiffy) {
+	while ((signed long)(next_jiffy_time - read_tcr1())
+		>= ticks_per_jiffy) {
 		timer_tick();
 		next_jiffy_time -= ticks_per_jiffy;
 	}
@@ -66,13 +72,13 @@ iop3xx_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction iop3xx_timer_irq = {
-	.name		= "IOP3XX Timer Tick",
-	.handler	= iop3xx_timer_interrupt,
+static struct irqaction iop_timer_irq = {
+	.name		= "IOP Timer Tick",
+	.handler	= iop_timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-void __init iop3xx_init_time(unsigned long tick_rate)
+void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
 
@@ -80,19 +86,17 @@ void __init iop3xx_init_time(unsigned long tick_rate)
 	ticks_per_usec = tick_rate / 1000000;
 	next_jiffy_time = 0xffffffff;
 
-	timer_ctl = IOP3XX_TMR_EN | IOP3XX_TMR_PRIVILEGED |
-			IOP3XX_TMR_RELOAD | IOP3XX_TMR_RATIO_1_1;
+	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
+			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
 
 	/*
 	 * We use timer 0 for our timer interrupt, and timer 1 as
 	 * monotonic counter for tracking missed jiffies.
 	 */
-	iop3xx_cp6_enable();
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (ticks_per_jiffy - 1));
-	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (timer_ctl));
-	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (0xffffffff));
-	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (timer_ctl));
-	iop3xx_cp6_disable();
-
-	setup_irq(IRQ_IOP3XX_TIMER0, &iop3xx_timer_irq);
+	write_trr0(ticks_per_jiffy - 1);
+	write_tmr0(timer_ctl);
+	write_trr1(0xffffffff);
+	write_tmr1(timer_ctl);
+
+	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
 }
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index bb045e5ddbd8..f3f84fbf8b87 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -557,7 +557,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		omap_enable_channel_irq(free_ch);
 		/* Clear the CSR register and IRQ status register */
 		OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-		omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
+		omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
 	}
 
 	*dma_ch_out = free_ch;
@@ -597,10 +597,7 @@ void omap_free_dma(int lch)
 
 		/* Clear the CSR register and IRQ status register */
 		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
-
-		val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
-		val |= 1 << lch;
-		omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+		omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
 
 		/* Disable all DMA interrupts for the channel. */
 		OMAP_DMA_CICR_REG(lch) = 0;
@@ -927,7 +924,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 static int omap2_dma_handle_ch(int ch)
 {
 	u32 status = OMAP_DMA_CSR_REG(ch);
-	u32 val;
 
 	if (!status)
 		return 0;
@@ -948,11 +944,7 @@ static int omap2_dma_handle_ch(int ch)
 		       dma_chan[ch].dev_id);
 
 	OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-
-	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
-	/* ch in this function is from 0-31 while in register it is 1-32 */
-	val = 1 << (ch);
-	omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+	omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
 
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index bcbb8d7392be..45f0439bffba 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -90,8 +90,8 @@ static struct omap_dm_timer dm_timers[] = {
 	{ .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
 	{ .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
 	{ .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
-	{ .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
-	{ .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
+	{ .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
+	{ .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
 };
 
 #elif defined(CONFIG_ARCH_OMAP2)
@@ -314,6 +314,8 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
 	BUG();
+
+	return 0;
 }
 
 #endif
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 4f2fd5591337..b8c01de208b4 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -974,10 +974,11 @@ static struct irq_chip gpio_irq_chip = {
 };
 
 static struct irq_chip mpuio_irq_chip = {
-	.name	= "MPUIO",
-	.ack	= mpuio_ack_irq,
-	.mask	= mpuio_mask_irq,
-	.unmask	= mpuio_unmask_irq
+	.name	  = "MPUIO",
+	.ack	  = mpuio_ack_irq,
+	.mask	  = mpuio_mask_irq,
+	.unmask	  = mpuio_unmask_irq,
+	.set_type = gpio_irq_type,
 };
 
 static int initialized;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ec50008a2df6..b8d6f17ff58f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -20,8 +20,8 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
-#include <asm/delay.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 042105ac30b8..6c798d288688 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -116,7 +116,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 	}
 
 	/* Check for pull up or pull down selection on 1610 */
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		if (cfg->pu_pd_reg && cfg->pull_val) {
 			spin_lock_irqsave(&mux_spin_lock, flags);
 			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
@@ -172,7 +172,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
 
-		if (!cpu_is_omap1510()) {
+		if (!cpu_is_omap15xx()) {
 			if (cfg->pu_pd_reg && cfg->pull_val) {
 				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 				       cfg->pu_pd_name, cfg->pu_pd_reg,
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
new file mode 100644
index 000000000000..b972f36d547c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -0,0 +1,107 @@
+# arch/arm/plat-s3c24xx/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_S3C24XX
+	bool
+	depends on ARCH_S3C2410
+	default y if ARCH_S3C2410
+	select NO_IOPORT
+	help
+	  Base platform code for any Samsung S3C device
+
+if PLAT_S3C24XX
+
+config CPU_S3C244X
+	bool
+	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	help
+	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+config PM_SIMTEC
+	bool
+	help
+	  Common power management code for systems that are
+	  compatible with the Simtec style of power management
+
+config S3C2410_BOOT_WATCHDOG
+	bool "S3C2410 Initialisation watchdog"
+	depends on ARCH_S3C2410 && S3C2410_WATCHDOG
+	help
+	  Say y to enable the watchdog during the kernel decompression
+	  stage. If the kernel fails to uncompress, then the watchdog
+	  will trigger a reset and the system should restart.
+
+config S3C2410_BOOT_ERROR_RESET
+	bool "S3C2410 Reboot on decompression error"
+	depends on ARCH_S3C2410
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+config S3C2410_PM_DEBUG
+	bool "S3C2410 PM Suspend debug"
+	depends on ARCH_S3C2410 && PM
+	help
+	  Say Y here if you want verbose debugging from the PM Suspend and
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+	  for more information.
+
+config S3C2410_PM_CHECK
+	bool "S3C2410 PM Suspend Memory CRC"
+	depends on ARCH_S3C2410 && PM && CRC32
+	help
+ 	  Enable the PM code's memory area checksum over sleep. This option
+	  will generate CRCs of all blocks of memory, and store them before
+	  going to sleep. The blocks are then checked on resume for any
+	  errors.
+
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
+	default 64
+	help
+	  Set the chunksize in Kilobytes of the CRC for checking memory
+	  corruption over suspend and resume. A smaller value will mean that
+	  the CRC data block will take more memory, but wil identify any
+	  faults with better precision.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
+config S3C2410_LOWLEVEL_UART_PORT
+	int "S3C2410 UART to use for low-level messages"
+	default 0
+	help
+	  Choice of which UART port to use for the low-level messages,
+	  such as the `Uncompressing...` at start time. The value of
+	  this configuration should be between zero and two. The port
+	  must have been initialised by the boot-loader before use.
+
+config S3C2410_DMA
+	bool "S3C2410 DMA support"
+	depends on ARCH_S3C2410
+	help
+	  S3C2410 DMA support. This is needed for drivers like sound which
+	  use the S3C2410's DMA system to move data to and from the
+	  peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+	bool "S3C2410 DMA support debug"
+	depends on ARCH_S3C2410 && S3C2410_DMA
+	help
+	  Enable debugging output for the DMA code. This option sends info
+	  to the kernel log, at priority KERN_DEBUG.
+
+config MACH_SMDK
+	bool
+	help
+	  Common machine code for SMDK2410 and SMDK2440
+
+endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
new file mode 100644
index 000000000000..8e5ccaa1f03c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/plat-s3c24xx/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+
+# Core files
+
+obj-y				+= cpu.o
+obj-y				+= irq.o
+obj-y				+= devs.o
+obj-y				+= gpio.o
+obj-y				+= time.o
+obj-y				+= clock.o
+
+# Architecture dependant builds
+
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
+obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_S3C2410_DMA)	+= dma.o
+obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
new file mode 100644
index 000000000000..d3dc03a7383a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -0,0 +1,449 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ **  Copyright (C) 2004 ARM Limited.
+ **  Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+DEFINE_MUTEX(clocks_mutex);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p;
+	struct clk *clk = ERR_PTR(-ENOENT);
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(p, &clocks, list) {
+		if (p->id == idno &&
+		    strcmp(id, p->name) == 0 &&
+		    try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+
+	/* check for the case where a device was supplied, but the
+	 * clock that was being searched for is not device specific */
+
+	if (IS_ERR(clk)) {
+		list_for_each_entry(p, &clocks, list) {
+			if (p->id == -1 && strcmp(id, p->name) == 0 &&
+			    try_module_get(p->owner)) {
+				clk = p;
+				break;
+			}
+		}
+	}
+
+	mutex_unlock(&clocks_mutex);
+	return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return -EINVAL;
+
+	clk_enable(clk->parent);
+
+	mutex_lock(&clocks_mutex);
+
+	if ((clk->usage++) == 0)
+		(clk->enable)(clk, 1);
+
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+	if (IS_ERR(clk) || clk == NULL)
+		return;
+
+	mutex_lock(&clocks_mutex);
+
+	if ((--clk->usage) == 0)
+		(clk->enable)(clk, 0);
+
+	mutex_unlock(&clocks_mutex);
+	clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (IS_ERR(clk))
+		return 0;
+
+	if (clk->rate != 0)
+		return clk->rate;
+
+	if (clk->get_rate != NULL)
+		return (clk->get_rate)(clk);
+
+	if (clk->parent != NULL)
+		return clk_get_rate(clk->parent);
+
+	return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!IS_ERR(clk) && clk->round_rate)
+		return (clk->round_rate)(clk, rate);
+
+	return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	ret = (clk->set_rate)(clk, rate);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = 0;
+
+	if (IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+
+	if (clk->set_parent)
+		ret = (clk->set_parent)(clk, parent);
+
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+struct clk clk_xtal = {
+	.name		= "xtal",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_mpll = {
+	.name		= "mpll",
+	.id		= -1,
+};
+
+struct clk clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_f = {
+	.name		= "fclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_mpll,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_h = {
+	.name		= "hclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_p = {
+	.name		= "pclk",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+};
+
+struct clk clk_usb_bus = {
+	.name		= "usb-bus",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= &clk_upll,
+};
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (enable)
+		dclkcon |= clk->ctrlbit;
+	else
+		dclkcon &= ~clk->ctrlbit;
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long dclkcon;
+	unsigned int uclk;
+
+	if (parent == &clk_upll)
+		uclk = 1;
+	else if (parent == &clk_p)
+		uclk = 0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+	} else {
+		if (uclk)
+			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+		else
+			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+	}
+
+	__raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+	return 0;
+}
+
+
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+	unsigned long mask;
+	unsigned long source;
+
+	/* calculate the MISCCR setting for the clock */
+
+	if (parent == &clk_xtal)
+		source = S3C2410_MISCCR_CLK0_MPLL;
+	else if (parent == &clk_upll)
+		source = S3C2410_MISCCR_CLK0_UPLL;
+	else if (parent == &clk_f)
+		source = S3C2410_MISCCR_CLK0_FCLK;
+	else if (parent == &clk_h)
+		source = S3C2410_MISCCR_CLK0_HCLK;
+	else if (parent == &clk_p)
+		source = S3C2410_MISCCR_CLK0_PCLK;
+	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+		source = S3C2410_MISCCR_CLK0_DCLK0;
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	if (clk == &s3c24xx_dclk0)
+		mask = S3C2410_MISCCR_CLK0_MASK;
+	else {
+		source <<= 4;
+		mask = S3C2410_MISCCR_CLK1_MASK;
+	}
+
+	s3c2410_modify_misccr(mask, source);
+	return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+	.name		= "dclk0",
+	.id		= -1,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.enable	        = s3c24xx_dclk_enable,
+	.set_parent	= s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_dclk1 = {
+	.name		= "dclk1",
+	.id		= -1,
+	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
+	.enable		= s3c24xx_dclk_enable,
+	.set_parent	= s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_clkout0 = {
+	.name		= "clkout0",
+	.id		= -1,
+	.set_parent	= s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+	.name		= "clkout1",
+	.id		= -1,
+	.set_parent	= s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_uclk = {
+	.name		= "uclk",
+	.id		= -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+	clk->owner = THIS_MODULE;
+
+	if (clk->enable == NULL)
+		clk->enable = clk_null_enable;
+
+	/* add to the list of available clocks */
+
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->list, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_setup_clocks(unsigned long xtal,
+				unsigned long fclk,
+				unsigned long hclk,
+				unsigned long pclk)
+{
+	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+	/* initialise the main system clocks */
+
+	clk_xtal.rate = xtal;
+	clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+
+	clk_mpll.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+	clk_f.rate = fclk;
+
+	/* assume uart clocks are correctly setup */
+
+	/* register our clocks */
+
+	if (s3c24xx_register_clock(&clk_xtal) < 0)
+		printk(KERN_ERR "failed to register master xtal\n");
+
+	if (s3c24xx_register_clock(&clk_mpll) < 0)
+		printk(KERN_ERR "failed to register mpll clock\n");
+
+	if (s3c24xx_register_clock(&clk_upll) < 0)
+		printk(KERN_ERR "failed to register upll clock\n");
+
+	if (s3c24xx_register_clock(&clk_f) < 0)
+		printk(KERN_ERR "failed to register cpu fclk\n");
+
+	if (s3c24xx_register_clock(&clk_h) < 0)
+		printk(KERN_ERR "failed to register cpu hclk\n");
+
+	if (s3c24xx_register_clock(&clk_p) < 0)
+		printk(KERN_ERR "failed to register cpu pclk\n");
+
+	return 0;
+}
diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index a40eaa656177..908efa7d745f 100644
--- a/arch/arm/mach-s3c2410/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/common-smdk.c
+/* linux/arch/arm/plat-s3c24xx/common-smdk.c
  *
  * Copyright (c) 2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -38,9 +38,9 @@
 
 #include <asm/arch/nand.h>
 
-#include "common-smdk.h"
-#include "devs.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 /* LED devices */
 
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index ae1f5bb63f7a..6a2d1070e5a0 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu.c
+/* linux/arch/arm/plat-s3c24xx/cpu.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/SWLINUX/
@@ -40,15 +40,16 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-serial.h>
 
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "s3c2400.h"
-#include "s3c2410.h"
-#include "s3c2412.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/s3c2400.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
 #include "s3c244x.h"
-#include "s3c2440.h"
-#include "s3c2442.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/s3c2443.h>
 
 struct cpu_table {
 	unsigned long	idcode;
@@ -67,6 +68,7 @@ static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2443[]  = "S3C2443";
 static const char name_s3c2410a[] = "S3C2410A";
 static const char name_s3c2440a[] = "S3C2440A";
 
@@ -135,6 +137,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.name		= name_s3c2412,
 	},
 	{
+		.idcode		= 0x32443001,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2443_map_io,
+		.init_clocks	= s3c2443_init_clocks,
+		.init_uarts	= s3c2443_init_uarts,
+		.init		= s3c2443_init,
+		.name		= name_s3c2443,
+	},
+	{
 		.idcode		= 0x0,   /* S3C2400 doesn't have an idcode */
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2400_map_io,
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/plat-s3c24xx/devs.c
index faccde2092d2..0fe53b39cb2f 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/devs.c
+/* linux/arch/arm/plat-s3c24xx/devs.c
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -29,9 +29,10 @@
 #include <asm/irq.h>
 
 #include <asm/arch/regs-serial.h>
+#include <asm/arch/udc.h>
 
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 /* Serial port registrations */
 
@@ -230,6 +231,20 @@ struct platform_device s3c_device_usbgadget = {
 
 EXPORT_SYMBOL(s3c_device_usbgadget);
 
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+	struct s3c2410_udc_mach_info *npd;
+
+	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	if (npd) {
+		memcpy(npd, pd, sizeof(*npd));
+		s3c_device_usbgadget.dev.platform_data = npd;
+	} else {
+		printk(KERN_ERR "no memory for udc platform data\n");
+	}
+}
+
+
 /* Watchdog */
 
 static struct resource s3c_wdt_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
new file mode 100644
index 000000000000..4540a806f522
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -0,0 +1,1499 @@
+/* linux/arch/arm/plat-s3c24xx/dma.c
+ *
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA core
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <asm/mach/dma.h>
+#include <asm/arch/map.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+
+/* io map for dma */
+static void __iomem *dma_base;
+static struct kmem_cache *dma_kmem;
+
+static int dma_channels;
+
+struct s3c24xx_dma_selection dma_sel;
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+/* debugging functions */
+
+#define BUF_MAGIC (0xcafebabe)
+
+#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
+
+#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
+
+#if 1
+#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
+#else
+static inline void
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
+{
+	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
+	writel(val, dma_regaddr(chan, reg));
+}
+#endif
+
+#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
+
+/* captured register state for debug */
+
+struct s3c2410_dma_regstate {
+	unsigned long         dcsrc;
+	unsigned long         disrc;
+	unsigned long         dstat;
+	unsigned long         dcon;
+	unsigned long         dmsktrig;
+};
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+
+/* dmadbg_showregs
+ *
+ * simple debug routine to print the current state of the dma registers
+*/
+
+static void
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
+{
+	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
+	regs->dstat    = dma_rdreg(chan, S3C2410_DMA_DSTAT);
+	regs->dcon     = dma_rdreg(chan, S3C2410_DMA_DCON);
+	regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+}
+
+static void
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
+		 struct s3c2410_dma_regstate *regs)
+{
+	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
+	       chan->number, fname, line,
+	       regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
+	       regs->dcon);
+}
+
+static void
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_regstate state;
+
+	dmadbg_capture(chan, &state);
+
+	printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
+	       chan->number, fname, line, chan->load_state,
+	       chan->curr, chan->next, chan->end);
+
+	dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+static void
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_regstate state;
+
+	dmadbg_capture(chan, &state);
+	dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#else
+#define dbg_showregs(chan) do { } while(0)
+#define dbg_showchan(chan) do { } while(0)
+#endif /* CONFIG_S3C2410_DMA_DEBUG */
+
+static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+
+/* lookup_dma_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+{
+	if (channel & DMACH_LOW_LEVEL)
+		return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+	else
+		return dma_chan_map[channel];
+}
+
+/* s3c2410_dma_stats_timeout
+ *
+ * Update DMA stats from timeout info
+*/
+
+static void
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+{
+	if (stats == NULL)
+		return;
+
+	if (val > stats->timeout_longest)
+		stats->timeout_longest = val;
+	if (val < stats->timeout_shortest)
+		stats->timeout_shortest = val;
+
+	stats->timeout_avg += val;
+}
+
+/* s3c2410_dma_waitforload
+ *
+ * wait for the DMA engine to load a buffer, and update the state accordingly
+*/
+
+static int
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
+{
+	int timeout = chan->load_timeout;
+	int took;
+
+	if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
+		printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
+		return 0;
+	}
+
+	if (chan->stats != NULL)
+		chan->stats->loads++;
+
+	while (--timeout > 0) {
+		if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
+			took = chan->load_timeout - timeout;
+
+			s3c2410_dma_stats_timeout(chan->stats, took);
+
+			switch (chan->load_state) {
+			case S3C2410_DMALOAD_1LOADED:
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				break;
+
+			default:
+				printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
+			}
+
+			return 1;
+		}
+	}
+
+	if (chan->stats != NULL) {
+		chan->stats->timeout_failed++;
+	}
+
+	return 0;
+}
+
+
+
+/* s3c2410_dma_loadbuffer
+ *
+ * load a buffer, and update the channel state
+*/
+
+static inline int
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+		       struct s3c2410_dma_buf *buf)
+{
+	unsigned long reload;
+
+	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+		 buf, (unsigned long)buf->data, buf->size);
+
+	if (buf == NULL) {
+		dmawarn("buffer is NULL\n");
+		return -EINVAL;
+	}
+
+	/* check the state of the channel before we do anything */
+
+	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+		dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
+	}
+
+	if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
+		dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
+	}
+
+	/* it would seem sensible if we are the last buffer to not bother
+	 * with the auto-reload bit, so that the DMA engine will not try
+	 * and load another transfer after this one has finished...
+	 */
+	if (chan->load_state == S3C2410_DMALOAD_NONE) {
+		pr_debug("load_state is none, checking for noreload (next=%p)\n",
+			 buf->next);
+		reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
+	} else {
+		//pr_debug("load_state is %d => autoreload\n", chan->load_state);
+		reload = S3C2410_DCON_AUTORELOAD;
+	}
+
+	if ((buf->data & 0xf0000000) != 0x30000000) {
+		dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
+	}
+
+	writel(buf->data, chan->addr_reg);
+
+	dma_wrreg(chan, S3C2410_DMA_DCON,
+		  chan->dcon | reload | (buf->size/chan->xfer_unit));
+
+	chan->next = buf->next;
+
+	/* update the state of the channel */
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_NONE:
+		chan->load_state = S3C2410_DMALOAD_1LOADED;
+		break;
+
+	case S3C2410_DMALOAD_1RUNNING:
+		chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
+		break;
+
+	default:
+		dmawarn("dmaload: unknown state %d in loadbuffer\n",
+			chan->load_state);
+		break;
+	}
+
+	return 0;
+}
+
+/* s3c2410_dma_call_op
+ *
+ * small routine to call the op routine with the given op if it has been
+ * registered
+*/
+
+static void
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
+{
+	if (chan->op_fn != NULL) {
+		(chan->op_fn)(chan, op);
+	}
+}
+
+/* s3c2410_dma_buffdone
+ *
+ * small wrapper to check if callback routine needs to be called, and
+ * if so, call it
+*/
+
+static inline void
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+		     enum s3c2410_dma_buffresult result)
+{
+#if 0
+	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
+		 chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
+
+	if (chan->callback_fn != NULL) {
+		(chan->callback_fn)(chan, buf->id, buf->size, result);
+	}
+}
+
+/* s3c2410_dma_start
+ *
+ * start a dma channel going
+*/
+
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
+{
+	unsigned long tmp;
+	unsigned long flags;
+
+	pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
+
+	local_irq_save(flags);
+
+	if (chan->state == S3C2410_DMA_RUNNING) {
+		pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
+		local_irq_restore(flags);
+		return 0;
+	}
+
+	chan->state = S3C2410_DMA_RUNNING;
+
+	/* check wether there is anything to load, and if not, see
+	 * if we can find anything to load
+	 */
+
+	if (chan->load_state == S3C2410_DMALOAD_NONE) {
+		if (chan->next == NULL) {
+			printk(KERN_ERR "dma%d: channel has nothing loaded\n",
+			       chan->number);
+			chan->state = S3C2410_DMA_IDLE;
+			local_irq_restore(flags);
+			return -EINVAL;
+		}
+
+		s3c2410_dma_loadbuffer(chan, chan->next);
+	}
+
+	dbg_showchan(chan);
+
+	/* enable the channel */
+
+	if (!chan->irq_enabled) {
+		enable_irq(chan->irq);
+		chan->irq_enabled = 1;
+	}
+
+	/* start the channel going */
+
+	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+	tmp &= ~S3C2410_DMASKTRIG_STOP;
+	tmp |= S3C2410_DMASKTRIG_ON;
+	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+	pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
+
+#if 0
+	/* the dma buffer loads should take care of clearing the AUTO
+	 * reloading feature */
+	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+	tmp &= ~S3C2410_DCON_NORELOAD;
+	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+	s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
+
+	dbg_showchan(chan);
+
+	/* if we've only loaded one buffer onto the channel, then chec
+	 * to see if we have another, and if so, try and load it so when
+	 * the first buffer is finished, the new one will be loaded onto
+	 * the channel */
+
+	if (chan->next != NULL) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				pr_debug("%s: buff not yet loaded, no more todo\n",
+					 __FUNCTION__);
+			} else {
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				s3c2410_dma_loadbuffer(chan, chan->next);
+			}
+
+		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	}
+
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/* s3c2410_dma_canload
+ *
+ * work out if we can queue another buffer into the DMA engine
+*/
+
+static int
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
+{
+	if (chan->load_state == S3C2410_DMALOAD_NONE ||
+	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
+		return 1;
+
+	return 0;
+}
+
+/* s3c2410_dma_enqueue
+ *
+ * queue an given buffer for dma transfer.
+ *
+ * id         the device driver's id information for this buffer
+ * data       the physical address of the buffer data
+ * size       the size of the buffer in bytes
+ *
+ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
+ * is checked, and if set, the channel is started. If this flag isn't set,
+ * then an error will be returned.
+ *
+ * It is possible to queue more than one DMA buffer onto a channel at
+ * once, and the code will deal with the re-loading of the next buffer
+ * when necessary.
+*/
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+			dma_addr_t data, int size)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	struct s3c2410_dma_buf *buf;
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: id=%p, data=%08x, size=%d\n",
+		 __FUNCTION__, id, (unsigned int)data, size);
+
+	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
+	if (buf == NULL) {
+		pr_debug("%s: out of memory (%ld alloc)\n",
+			 __FUNCTION__, (long)sizeof(*buf));
+		return -ENOMEM;
+	}
+
+	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+	//dbg_showchan(chan);
+
+	buf->next  = NULL;
+	buf->data  = buf->ptr = data;
+	buf->size  = size;
+	buf->id    = id;
+	buf->magic = BUF_MAGIC;
+
+	local_irq_save(flags);
+
+	if (chan->curr == NULL) {
+		/* we've got nothing loaded... */
+		pr_debug("%s: buffer %p queued onto empty channel\n",
+			 __FUNCTION__, buf);
+
+		chan->curr = buf;
+		chan->end  = buf;
+		chan->next = NULL;
+	} else {
+		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
+			 chan->number, __FUNCTION__, buf);
+
+		if (chan->end == NULL)
+			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
+				 chan->number, __FUNCTION__, chan);
+
+		chan->end->next = buf;
+		chan->end = buf;
+	}
+
+	/* if necessary, update the next buffer field */
+	if (chan->next == NULL)
+		chan->next = buf;
+
+	/* check to see if we can load a buffer */
+	if (chan->state == S3C2410_DMA_RUNNING) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				printk(KERN_ERR "dma%d: loadbuffer:"
+				       "timeout loading buffer\n",
+				       chan->number);
+				dbg_showchan(chan);
+				local_irq_restore(flags);
+				return -EINVAL;
+			}
+		}
+
+		while (s3c2410_dma_canload(chan) && chan->next != NULL) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	} else if (chan->state == S3C2410_DMA_IDLE) {
+		if (chan->flags & S3C2410_DMAF_AUTOSTART) {
+			s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+		}
+	}
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+static inline void
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
+{
+	int magicok = (buf->magic == BUF_MAGIC);
+
+	buf->magic = -1;
+
+	if (magicok) {
+		kmem_cache_free(dma_kmem, buf);
+	} else {
+		printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
+	}
+}
+
+/* s3c2410_dma_lastxfer
+ *
+ * called when the system is out of buffers, to ensure that the channel
+ * is prepared for shutdown.
+*/
+
+static inline void
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
+{
+#if 0
+	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
+		 chan->number, chan->load_state);
+#endif
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_NONE:
+		break;
+
+	case S3C2410_DMALOAD_1LOADED:
+		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				/* flag error? */
+			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+			       chan->number, __FUNCTION__);
+			return;
+		}
+		break;
+
+	case S3C2410_DMALOAD_1LOADED_1RUNNING:
+		/* I belive in this case we do not have anything to do
+		 * until the next buffer comes along, and we turn off the
+		 * reload */
+		return;
+
+	default:
+		pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
+			 chan->number, chan->load_state);
+		return;
+
+	}
+
+	/* hopefully this'll shut the damned thing up after the transfer... */
+	dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
+}
+
+
+#define dmadbg2(x...)
+
+static irqreturn_t
+s3c2410_dma_irq(int irq, void *devpw)
+{
+	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+	struct s3c2410_dma_buf  *buf;
+
+	buf = chan->curr;
+
+	dbg_showchan(chan);
+
+	/* modify the channel state */
+
+	switch (chan->load_state) {
+	case S3C2410_DMALOAD_1RUNNING:
+		/* TODO - if we are running only one buffer, we probably
+		 * want to reload here, and then worry about the buffer
+		 * callback */
+
+		chan->load_state = S3C2410_DMALOAD_NONE;
+		break;
+
+	case S3C2410_DMALOAD_1LOADED:
+		/* iirc, we should go back to NONE loaded here, we
+		 * had a buffer, and it was never verified as being
+		 * loaded.
+		 */
+
+		chan->load_state = S3C2410_DMALOAD_NONE;
+		break;
+
+	case S3C2410_DMALOAD_1LOADED_1RUNNING:
+		/* we'll worry about checking to see if another buffer is
+		 * ready after we've called back the owner. This should
+		 * ensure we do not wait around too long for the DMA
+		 * engine to start the next transfer
+		 */
+
+		chan->load_state = S3C2410_DMALOAD_1LOADED;
+		break;
+
+	case S3C2410_DMALOAD_NONE:
+		printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
+		       chan->number);
+		break;
+
+	default:
+		printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
+		       chan->number, chan->load_state);
+		break;
+	}
+
+	if (buf != NULL) {
+		/* update the chain to make sure that if we load any more
+		 * buffers when we call the callback function, things should
+		 * work properly */
+
+		chan->curr = buf->next;
+		buf->next  = NULL;
+
+		if (buf->magic != BUF_MAGIC) {
+			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
+			       chan->number, __FUNCTION__, buf);
+			return IRQ_HANDLED;
+		}
+
+		s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
+
+		/* free resouces */
+		s3c2410_dma_freebuf(buf);
+	} else {
+	}
+
+	/* only reload if the channel is still running... our buffer done
+	 * routine may have altered the state by requesting the dma channel
+	 * to stop or shutdown... */
+
+	/* todo: check that when the channel is shut-down from inside this
+	 * function, we cope with unsetting reload, etc */
+
+	if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
+		unsigned long flags;
+
+		switch (chan->load_state) {
+		case S3C2410_DMALOAD_1RUNNING:
+			/* don't need to do anything for this state */
+			break;
+
+		case S3C2410_DMALOAD_NONE:
+			/* can load buffer immediately */
+			break;
+
+		case S3C2410_DMALOAD_1LOADED:
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				/* flag error? */
+				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+				       chan->number, __FUNCTION__);
+				return IRQ_HANDLED;
+			}
+
+			break;
+
+		case S3C2410_DMALOAD_1LOADED_1RUNNING:
+			goto no_load;
+
+		default:
+			printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
+			       chan->number, chan->load_state);
+			return IRQ_HANDLED;
+		}
+
+		local_irq_save(flags);
+		s3c2410_dma_loadbuffer(chan, chan->next);
+		local_irq_restore(flags);
+	} else {
+		s3c2410_dma_lastxfer(chan);
+
+		/* see if we can stop this channel.. */
+		if (chan->load_state == S3C2410_DMALOAD_NONE) {
+			pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
+				 chan->number, jiffies);
+			s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+					 S3C2410_DMAOP_STOP);
+		}
+	}
+
+ no_load:
+	return IRQ_HANDLED;
+}
+
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c2410_dma_chan *chan;
+	unsigned long flags;
+	int err;
+
+	pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+		 channel, client->name, dev);
+
+	local_irq_save(flags);
+
+	chan = s3c2410_dma_map_channel(channel);
+	if (chan == NULL) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+
+	dbg_showchan(chan);
+
+	chan->client = client;
+	chan->in_use = 1;
+
+	if (!chan->irq_claimed) {
+		pr_debug("dma%d: %s : requesting irq %d\n",
+			 channel, __FUNCTION__, chan->irq);
+
+		chan->irq_claimed = 1;
+		local_irq_restore(flags);
+
+		err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
+				  client->name, (void *)chan);
+
+		local_irq_save(flags);
+
+		if (err) {
+			chan->in_use = 0;
+			chan->irq_claimed = 0;
+			local_irq_restore(flags);
+
+			printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
+			       client->name, chan->irq, chan->number);
+			return err;
+		}
+
+		chan->irq_enabled = 1;
+	}
+
+	local_irq_restore(flags);
+
+	/* need to setup */
+
+	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+	unsigned long flags;
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	if (chan->client != client) {
+		printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+		       channel, chan->client, client);
+	}
+
+	/* sort out stopping and freeing the channel */
+
+	if (chan->state != S3C2410_DMA_IDLE) {
+		pr_debug("%s: need to stop dma channel %p\n",
+		       __FUNCTION__, chan);
+
+		/* possibly flush the channel */
+		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
+	}
+
+	chan->client = NULL;
+	chan->in_use = 0;
+
+	if (chan->irq_claimed)
+		free_irq(chan->irq, (void *)chan);
+
+	chan->irq_claimed = 0;
+
+	if (!(channel & DMACH_LOW_LEVEL))
+		dma_chan_map[channel] = NULL;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
+{
+	unsigned long flags;
+	unsigned long tmp;
+
+	pr_debug("%s:\n", __FUNCTION__);
+
+	dbg_showchan(chan);
+
+	local_irq_save(flags);
+
+	s3c2410_dma_call_op(chan,  S3C2410_DMAOP_STOP);
+
+	tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+	tmp |= S3C2410_DMASKTRIG_STOP;
+	//tmp &= ~S3C2410_DMASKTRIG_ON;
+	dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+#if 0
+	/* should also clear interrupts, according to WinCE BSP */
+	tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+	tmp |= S3C2410_DCON_NORELOAD;
+	dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+	/* should stop do this, or should we wait for flush? */
+	chan->state      = S3C2410_DMA_IDLE;
+	chan->load_state = S3C2410_DMALOAD_NONE;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+{
+	unsigned long tmp;
+	unsigned int timeout = 0x10000;
+
+	while (timeout-- > 0) {
+		tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+
+		if (!(tmp & S3C2410_DMASKTRIG_ON))
+			return;
+	}
+
+	pr_debug("dma%d: failed to stop?\n", chan->number);
+}
+
+
+/* s3c2410_dma_flush
+ *
+ * stop the channel, and remove all current and pending transfers
+*/
+
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
+{
+	struct s3c2410_dma_buf *buf, *next;
+	unsigned long flags;
+
+	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+
+	dbg_showchan(chan);
+
+	local_irq_save(flags);
+
+	if (chan->state != S3C2410_DMA_IDLE) {
+		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+	}
+
+	buf = chan->curr;
+	if (buf == NULL)
+		buf = chan->next;
+
+	chan->curr = chan->next = chan->end = NULL;
+
+	if (buf != NULL) {
+		for ( ; buf != NULL; buf = next) {
+			next = buf->next;
+
+			pr_debug("%s: free buffer %p, next %p\n",
+			       __FUNCTION__, buf, buf->next);
+
+			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
+			s3c2410_dma_freebuf(buf);
+		}
+	}
+
+	dbg_showregs(chan);
+
+	s3c2410_dma_waitforstop(chan);
+
+#if 0
+	/* should also clear interrupts, according to WinCE BSP */
+	{
+		unsigned long tmp;
+
+		tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+		tmp |= S3C2410_DCON_NORELOAD;
+		dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+	}
+#endif
+
+	dbg_showregs(chan);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+int
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	dbg_showchan(chan);
+
+	/* if we've only loaded one buffer onto the channel, then chec
+	 * to see if we have another, and if so, try and load it so when
+	 * the first buffer is finished, the new one will be loaded onto
+	 * the channel */
+
+	if (chan->next != NULL) {
+		if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+				pr_debug("%s: buff not yet loaded, no more todo\n",
+					 __FUNCTION__);
+			} else {
+				chan->load_state = S3C2410_DMALOAD_1RUNNING;
+				s3c2410_dma_loadbuffer(chan, chan->next);
+			}
+
+		} else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+			s3c2410_dma_loadbuffer(chan, chan->next);
+		}
+	}
+
+
+	local_irq_restore(flags);
+
+	return 0;
+
+}
+
+int
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		return s3c2410_dma_start(chan);
+
+	case S3C2410_DMAOP_STOP:
+		return s3c2410_dma_dostop(chan);
+
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+		return -ENOENT;
+
+	case S3C2410_DMAOP_FLUSH:
+		return s3c2410_dma_flush(chan);
+
+	case S3C2410_DMAOP_STARTED:
+		return s3c2410_dma_started(chan);
+
+	case S3C2410_DMAOP_TIMEOUT:
+		return 0;
+
+	}
+
+	return -ENOENT;      /* unknown, don't bother */
+}
+
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* DMA configuration for each channel
+ *
+ * DISRCC -> source of the DMA (AHB,APB)
+ * DISRC  -> source address of the DMA
+ * DIDSTC -> destination of the DMA (AHB,APD)
+ * DIDST  -> destination address of the DMA
+*/
+
+/* s3c2410_dma_config
+ *
+ * xfersize:     size of unit in bytes (1,2,4)
+ * dcon:         base value of the DCONx register
+*/
+
+int s3c2410_dma_config(dmach_t channel,
+		       int xferunit,
+		       int dcon)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+		 __FUNCTION__, channel, xferunit, dcon);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+
+	dcon |= chan->dcon & dma_sel.dcon_mask;
+
+	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+
+	switch (xferunit) {
+	case 1:
+		dcon |= S3C2410_DCON_BYTE;
+		break;
+
+	case 2:
+		dcon |= S3C2410_DCON_HALFWORD;
+		break;
+
+	case 4:
+		dcon |= S3C2410_DCON_WORD;
+		break;
+
+	default:
+		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+		return -EINVAL;
+	}
+
+	dcon |= S3C2410_DCON_HWTRIG;
+	dcon |= S3C2410_DCON_INTREQ;
+
+	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+
+	chan->dcon = dcon;
+	chan->xfer_unit = xferunit;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+
+	chan->flags = flags;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+
+	chan->op_fn = rtn;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+
+	chan->callback_fn = rtn;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the dma source/destination hardware type and address
+ *
+ * source:    S3C2410_DMASRC_HW: source is hardware
+ *            S3C2410_DMASRC_MEM: source is memory
+ *
+ * hwcfg:     the value for xxxSTCn register,
+ *            bit 0: 0=increment pointer, 1=leave pointer
+ *            bit 1: 0=soucre is AHB, 1=soucre is APB
+ *
+ * devaddr:   physical address of the source
+*/
+
+int s3c2410_dma_devconfig(int channel,
+			  enum s3c2410_dmasrc source,
+			  int hwcfg,
+			  unsigned long devaddr)
+{
+	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
+		 __FUNCTION__, (int)source, hwcfg, devaddr);
+
+	chan->source = source;
+	chan->dev_addr = devaddr;
+
+	switch (source) {
+	case S3C2410_DMASRC_HW:
+		/* source is hardware */
+		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
+			 __FUNCTION__, devaddr, hwcfg);
+		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
+		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
+		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
+
+		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
+		return 0;
+
+	case S3C2410_DMASRC_MEM:
+		/* source is memory */
+		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+			  __FUNCTION__, devaddr, hwcfg);
+		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
+		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
+		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
+
+		chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
+		return 0;
+	}
+
+	printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
+	return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+/* s3c2410_dma_getposition
+ *
+ * returns the current transfer points for the dma source and destination
+*/
+
+int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
+{
+ 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+	if (chan == NULL)
+		return -EINVAL;
+
+	if (src != NULL)
+ 		*src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+
+ 	if (dst != NULL)
+ 		*dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
+
+ 	return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+
+/* system device class */
+
+#ifdef CONFIG_PM
+
+static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+
+	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
+
+	if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
+		/* the dma channel is still working, which is probably
+		 * a bad thing to do over suspend/resume. We stop the
+		 * channel and assume that the client is either going to
+		 * retry after resume, or that it is broken.
+		 */
+
+		printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
+		       cp->number);
+
+		s3c2410_dma_dostop(cp);
+	}
+
+	return 0;
+}
+
+static int s3c2410_dma_resume(struct sys_device *dev)
+{
+	return 0;
+}
+
+#else
+#define s3c2410_dma_suspend NULL
+#define s3c2410_dma_resume  NULL
+#endif /* CONFIG_PM */
+
+struct sysdev_class dma_sysclass = {
+	set_kset_name("s3c24xx-dma"),
+	.suspend	= s3c2410_dma_suspend,
+	.resume		= s3c2410_dma_resume,
+};
+
+/* kmem cache implementation */
+
+static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
+{
+	memset(p, 0, sizeof(struct s3c2410_dma_buf));
+}
+
+/* initialisation code */
+
+int __init s3c24xx_dma_sysclass_init(void)
+{
+	int ret = sysdev_class_register(&dma_sysclass);
+
+	if (ret != 0)
+		printk(KERN_ERR "dma sysclass registration failed\n");
+
+	return ret;
+}
+
+core_initcall(s3c24xx_dma_sysclass_init);
+
+int __init s3c24xx_dma_sysdev_register(void)
+{
+	struct s3c2410_dma_chan *cp = s3c2410_chans;
+	int channel, ret;
+
+	for (channel = 0; channel < dma_channels; cp++, channel++) {
+		cp->dev.cls = &dma_sysclass;
+		cp->dev.id  = channel;
+		ret = sysdev_register(&cp->dev);
+
+		if (ret) {
+			printk(KERN_ERR "error registering dev for dma %d\n",
+			       channel);
+ 			return ret;
+		}
+	}
+
+	return 0;
+}
+
+late_initcall(s3c24xx_dma_sysdev_register);
+
+int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride)
+{
+	struct s3c2410_dma_chan *cp;
+	int channel;
+	int ret;
+
+	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+
+	dma_channels = channels;
+
+	dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
+	if (dma_base == NULL) {
+		printk(KERN_ERR "dma failed to remap register block\n");
+		return -ENOMEM;
+	}
+
+	dma_kmem = kmem_cache_create("dma_desc",
+				     sizeof(struct s3c2410_dma_buf), 0,
+				     SLAB_HWCACHE_ALIGN,
+				     s3c2410_dma_cache_ctor, NULL);
+
+	if (dma_kmem == NULL) {
+		printk(KERN_ERR "dma failed to make kmem cache\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	for (channel = 0; channel < channels;  channel++) {
+		cp = &s3c2410_chans[channel];
+
+		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
+
+		/* dma channel irqs are in order.. */
+		cp->number = channel;
+		cp->irq    = channel + irq;
+		cp->regs   = dma_base + (channel * stride);
+
+		/* point current stats somewhere */
+		cp->stats  = &cp->stats_store;
+		cp->stats_store.timeout_shortest = LONG_MAX;
+
+		/* basic channel configuration */
+
+		cp->load_timeout = 1<<18;
+
+		printk("DMA channel %d at %p, irq %d\n",
+		       cp->number, cp->regs, cp->irq);
+	}
+
+	return 0;
+
+ err:
+	kmem_cache_destroy(dma_kmem);
+	iounmap(dma_base);
+	dma_base = NULL;
+	return ret;
+}
+
+int s3c2410_dma_init(void)
+{
+	return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
+}
+
+static inline int is_channel_valid(unsigned int channel)
+{
+	return (channel & DMA_CH_VALID);
+}
+
+static struct s3c24xx_dma_order *dma_order;
+
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * first, try the dma ordering given to us by either the relevant
+ * dma code, or the board. Then just find the first usable free
+ * channel
+*/
+
+struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+	struct s3c24xx_dma_order_ch *ord = NULL;
+	struct s3c24xx_dma_map *ch_map;
+	struct s3c2410_dma_chan *dmach;
+	int ch;
+
+	if (dma_sel.map == NULL || channel > dma_sel.map_size)
+		return NULL;
+
+	ch_map = dma_sel.map + channel;
+
+	/* first, try the board mapping */
+
+	if (dma_order) {
+		ord = &dma_order->channels[channel];
+
+		for (ch = 0; ch < dma_channels; ch++) {
+			if (!is_channel_valid(ord->list[ch]))
+				continue;
+
+			if (s3c2410_chans[ord->list[ch]].in_use == 0) {
+				ch = ord->list[ch] & ~DMA_CH_VALID;
+				goto found;
+			}
+		}
+
+		if (ord->flags & DMA_CH_NEVER)
+			return NULL;
+	}
+
+	/* second, search the channel map for first free */
+
+	for (ch = 0; ch < dma_channels; ch++) {
+		if (!is_channel_valid(ch_map->channels[ch]))
+			continue;
+
+		if (s3c2410_chans[ch].in_use == 0) {
+			printk("mapped channel %d to %d\n", channel, ch);
+			break;
+		}
+	}
+
+	if (ch >= dma_channels)
+		return NULL;
+
+	/* update our channel mapping */
+
+ found:
+	dmach = &s3c2410_chans[ch];
+	dma_chan_map[channel] = dmach;
+
+	/* select the channel */
+
+	(dma_sel.select)(dmach, ch_map);
+
+	return dmach;
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+	return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+	struct s3c24xx_dma_map *nmap;
+	size_t map_sz = sizeof(*nmap) * sel->map_size;
+	int ptr;
+
+	nmap = kmalloc(map_sz, GFP_KERNEL);
+	if (nmap == NULL)
+		return -ENOMEM;
+
+	memcpy(nmap, sel->map, map_sz);
+	memcpy(&dma_sel, sel, sizeof(*sel));
+
+	dma_sel.map = nmap;
+
+	for (ptr = 0; ptr < sel->map_size; ptr++)
+		s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+	return 0;
+}
+
+int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
+{
+	struct s3c24xx_dma_order *nord = dma_order;
+
+	if (nord == NULL)
+		nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
+
+	if (nord == NULL) {
+		printk(KERN_ERR "no memory to store dma channel order\n");
+		return -ENOMEM;
+	}
+
+	dma_order = nord;
+	memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
+	return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
new file mode 100644
index 000000000000..ec3a09c4d181
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -0,0 +1,188 @@
+/* linux/arch/arm/plat-s3c24xx/gpio.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long mask;
+	unsigned long con;
+	unsigned long flags;
+
+	if (pin < S3C2410_GPIO_BANKB) {
+		mask = 1 << S3C2410_GPIO_OFFSET(pin);
+	} else {
+		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+	}
+
+	switch (function) {
+	case S3C2410_GPIO_LEAVE:
+		mask = 0;
+		function = 0;
+		break;
+
+	case S3C2410_GPIO_INPUT:
+	case S3C2410_GPIO_OUTPUT:
+	case S3C2410_GPIO_SFN2:
+	case S3C2410_GPIO_SFN3:
+		if (pin < S3C2410_GPIO_BANKB) {
+			function -= 1;
+			function &= 1;
+			function <<= S3C2410_GPIO_OFFSET(pin);
+		} else {
+			function &= 3;
+			function <<= S3C2410_GPIO_OFFSET(pin)*2;
+		}
+	}
+
+	/* modify the specified register wwith IRQs off */
+
+	local_irq_save(flags);
+
+	con  = __raw_readl(base + 0x00);
+	con &= ~mask;
+	con |= function;
+
+	__raw_writel(con, base + 0x00);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
+
+unsigned int s3c2410_gpio_getcfg(unsigned int pin)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long val = __raw_readl(base);
+
+	if (pin < S3C2410_GPIO_BANKB) {
+		val >>= S3C2410_GPIO_OFFSET(pin);
+		val &= 1;
+		val += 1;
+	} else {
+		val >>= S3C2410_GPIO_OFFSET(pin)*2;
+		val &= 3;
+	}
+
+	return val | S3C2410_GPIO_INPUT;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getcfg);
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long up;
+
+	if (pin < S3C2410_GPIO_BANKB)
+		return;
+
+	local_irq_save(flags);
+
+	up = __raw_readl(base + 0x08);
+	up &= ~(1L << offs);
+	up |= to << offs;
+	__raw_writel(up, base + 0x08);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offs);
+	dat |= to << offs;
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+	void __iomem *base = S3C24XX_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+	return __raw_readl(base + 0x04) & (1<< offs);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+		return -1;	/* not valid interrupts */
+
+	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+		return -1;	/* not valid pin */
+
+	if (pin < S3C2410_GPF4)
+		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+	if (pin < S3C2410_GPG0)
+		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
new file mode 100644
index 000000000000..ce186398e3fd
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -0,0 +1,801 @@
+/* linux/arch/arm/plat-s3c24xx/irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *
+ *   22-Jul-2004  Ben Dooks <ben@simtec.co.uk>
+ *                Fixed compile warnings
+ *
+ *   22-Jul-2004  Roc Wu <cooloney@yahoo.com.cn>
+ *                Fixed s3c_extirq_type
+ *
+ *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
+ *                Addition of ADC/TC demux
+ *
+ *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
+ *		  Fix for set_irq_type() on low EINT numbers
+ *
+ *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+ *		  Tidy up KF's patch and sort out new release
+ *
+ *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+ *		  Add support for power management controls
+ *
+ *   04-Nov-2004  Ben Dooks
+ *		  Fix standard IRQ wake for EINT0..4 and RTC
+ *
+ *   22-Feb-2005  Ben Dooks
+ *		  Fixed edge-triggering on ADC IRQ
+ *
+ *   28-Jun-2005  Ben Dooks
+ *		  Mark IRQ_LCD valid
+ *
+ *   25-Jul-2005  Ben Dooks
+ *		  Split the S3C2440 IRQ code to seperate file
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* wakeup irq control */
+
+#ifdef CONFIG_PM
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow	= 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intmask	= 0xffffffffL;
+unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
+unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
+
+int
+s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+	if (!(s3c_irqwake_intallow & irqbit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_intmask |= irqbit;
+	else
+		s3c_irqwake_intmask &= ~irqbit;
+
+	return 0;
+}
+
+static int
+s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long bit = 1L << (irqno - EXTINT_OFF);
+
+	if (!(s3c_irqwake_eintallow & bit))
+		return -ENOENT;
+
+	printk(KERN_INFO "wake %s for irq %d\n",
+	       state ? "enabled" : "disabled", irqno);
+
+	if (!state)
+		s3c_irqwake_eintmask |= bit;
+	else
+		s3c_irqwake_eintmask &= ~bit;
+
+	return 0;
+}
+
+#else
+#define s3c_irqext_wake NULL
+#define s3c_irq_wake NULL
+#endif
+
+
+static void
+s3c_irq_mask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	irqno -= IRQ_EINT0;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	mask |= 1UL << irqno;
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+static inline void
+s3c_irq_ack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c_irq_maskack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask|bitval, S3C2410_INTMSK);
+
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+
+static void
+s3c_irq_unmask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+		irqdbf2("s3c_irq_unmask %d\n", irqno);
+
+	irqno -= IRQ_EINT0;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	mask &= ~(1UL << irqno);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+struct irq_chip s3c_irq_level_chip = {
+	.name		= "s3c-level",
+	.ack		= s3c_irq_maskack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake
+};
+
+static struct irq_chip s3c_irq_chip = {
+	.name		= "s3c",
+	.ack		= s3c_irq_ack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake
+};
+
+static void
+s3c_irqext_mask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	irqno -= EXTINT_OFF;
+
+	mask = __raw_readl(S3C24XX_EINTMASK);
+	mask |= ( 1UL << irqno);
+	__raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+static void
+s3c_irqext_ack(unsigned int irqno)
+{
+	unsigned long req;
+	unsigned long bit;
+	unsigned long mask;
+
+	bit = 1UL << (irqno - EXTINT_OFF);
+
+	mask = __raw_readl(S3C24XX_EINTMASK);
+
+	__raw_writel(bit, S3C24XX_EINTPEND);
+
+	req = __raw_readl(S3C24XX_EINTPEND);
+	req &= ~mask;
+
+	/* not sure if we should be acking the parent irq... */
+
+	if (irqno <= IRQ_EINT7 ) {
+		if ((req & 0xf0) == 0)
+			s3c_irq_ack(IRQ_EINT4t7);
+	} else {
+		if ((req >> 8) == 0)
+			s3c_irq_ack(IRQ_EINT8t23);
+	}
+}
+
+static void
+s3c_irqext_unmask(unsigned int irqno)
+{
+	unsigned long mask;
+
+	irqno -= EXTINT_OFF;
+
+	mask = __raw_readl(S3C24XX_EINTMASK);
+	mask &= ~( 1UL << irqno);
+	__raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+int
+s3c_irqext_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *extint_reg;
+	void __iomem *gpcon_reg;
+	unsigned long gpcon_offset, extint_offset;
+	unsigned long newvalue = 0, value;
+
+	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
+	{
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (irq - IRQ_EINT0) * 2;
+		extint_offset = (irq - IRQ_EINT0) * 4;
+	}
+	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
+	{
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C24XX_EXTINT0;
+		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
+		extint_offset = (irq - (EXTINT_OFF)) * 4;
+	}
+	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
+	{
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT1;
+		gpcon_offset = (irq - IRQ_EINT8) * 2;
+		extint_offset = (irq - IRQ_EINT8) * 4;
+	}
+	else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
+	{
+		gpcon_reg = S3C2410_GPGCON;
+		extint_reg = S3C24XX_EXTINT2;
+		gpcon_offset = (irq - IRQ_EINT8) * 2;
+		extint_offset = (irq - IRQ_EINT16) * 4;
+	} else
+		return -1;
+
+	/* Set the GPIO to external interrupt mode */
+	value = __raw_readl(gpcon_reg);
+	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+	__raw_writel(value, gpcon_reg);
+
+	/* Set the external interrupt to pointed trigger type */
+	switch (type)
+	{
+		case IRQT_NOEDGE:
+			printk(KERN_WARNING "No edge setting!\n");
+			break;
+
+		case IRQT_RISING:
+			newvalue = S3C2410_EXTINT_RISEEDGE;
+			break;
+
+		case IRQT_FALLING:
+			newvalue = S3C2410_EXTINT_FALLEDGE;
+			break;
+
+		case IRQT_BOTHEDGE:
+			newvalue = S3C2410_EXTINT_BOTHEDGE;
+			break;
+
+		case IRQT_LOW:
+			newvalue = S3C2410_EXTINT_LOWLEV;
+			break;
+
+		case IRQT_HIGH:
+			newvalue = S3C2410_EXTINT_HILEV;
+			break;
+
+		default:
+			printk(KERN_ERR "No such irq type %d", type);
+			return -1;
+	}
+
+	value = __raw_readl(extint_reg);
+	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+	__raw_writel(value, extint_reg);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irqext_chip = {
+	.name		= "s3c-ext",
+	.mask		= s3c_irqext_mask,
+	.unmask		= s3c_irqext_unmask,
+	.ack		= s3c_irqext_ack,
+	.set_type	= s3c_irqext_type,
+	.set_wake	= s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+	.name		= "s3c-ext0",
+	.ack		= s3c_irq_ack,
+	.mask		= s3c_irq_mask,
+	.unmask		= s3c_irq_unmask,
+	.set_wake	= s3c_irq_wake,
+	.set_type	= s3c_irqext_type,
+};
+
+/* mask values for the parent registers for each of the interrupt types */
+
+#define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
+#define INTMSK_UART1	 (1UL << (IRQ_UART1 - IRQ_EINT0))
+#define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
+#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
+
+
+/* UART0 */
+
+static void
+s3c_irq_uart0_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
+}
+
+static void
+s3c_irq_uart0_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART0);
+}
+
+static void
+s3c_irq_uart0_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
+}
+
+static struct irq_chip s3c_irq_uart0 = {
+	.name		= "s3c-uart0",
+	.mask		= s3c_irq_uart0_mask,
+	.unmask		= s3c_irq_uart0_unmask,
+	.ack		= s3c_irq_uart0_ack,
+};
+
+/* UART1 */
+
+static void
+s3c_irq_uart1_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static void
+s3c_irq_uart1_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART1);
+}
+
+static void
+s3c_irq_uart1_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static struct irq_chip s3c_irq_uart1 = {
+	.name		= "s3c-uart1",
+	.mask		= s3c_irq_uart1_mask,
+	.unmask		= s3c_irq_uart1_unmask,
+	.ack		= s3c_irq_uart1_ack,
+};
+
+/* UART2 */
+
+static void
+s3c_irq_uart2_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static void
+s3c_irq_uart2_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART2);
+}
+
+static void
+s3c_irq_uart2_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static struct irq_chip s3c_irq_uart2 = {
+	.name		= "s3c-uart2",
+	.mask		= s3c_irq_uart2_mask,
+	.unmask		= s3c_irq_uart2_unmask,
+	.ack		= s3c_irq_uart2_ack,
+};
+
+/* ADC and Touchscreen */
+
+static void
+s3c_irq_adc_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static void
+s3c_irq_adc_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
+}
+
+static void
+s3c_irq_adc_ack(unsigned int irqno)
+{
+	s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static struct irq_chip s3c_irq_adc = {
+	.name		= "s3c-adc",
+	.mask		= s3c_irq_adc_mask,
+	.unmask		= s3c_irq_adc_unmask,
+	.ack		= s3c_irq_adc_ack,
+};
+
+/* irq demux for adc */
+static void s3c_irq_demux_adc(unsigned int irq,
+			      struct irq_desc *desc)
+{
+	unsigned int subsrc, submsk;
+	unsigned int offset = 9;
+	struct irq_desc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= offset;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_TC;
+			desc_handle_irq(IRQ_TC, mydesc);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_ADC;
+			desc_handle_irq(IRQ_ADC, mydesc);
+		}
+	}
+}
+
+static void s3c_irq_demux_uart(unsigned int start)
+{
+	unsigned int subsrc, submsk;
+	unsigned int offset = start - IRQ_S3CUART_RX0;
+	struct irq_desc *desc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
+		start, offset, subsrc, submsk);
+
+	subsrc &= ~submsk;
+	subsrc >>= offset;
+	subsrc &= 7;
+
+	if (subsrc != 0) {
+		desc = irq_desc + start;
+
+		if (subsrc & 1)
+			desc_handle_irq(start, desc);
+
+		desc++;
+
+		if (subsrc & 2)
+			desc_handle_irq(start+1, desc);
+
+		desc++;
+
+		if (subsrc & 4)
+			desc_handle_irq(start+2, desc);
+	}
+}
+
+/* uart demux entry points */
+
+static void
+s3c_irq_demux_uart0(unsigned int irq,
+		    struct irq_desc *desc)
+{
+	irq = irq;
+	s3c_irq_demux_uart(IRQ_S3CUART_RX0);
+}
+
+static void
+s3c_irq_demux_uart1(unsigned int irq,
+		    struct irq_desc *desc)
+{
+	irq = irq;
+	s3c_irq_demux_uart(IRQ_S3CUART_RX1);
+}
+
+static void
+s3c_irq_demux_uart2(unsigned int irq,
+		    struct irq_desc *desc)
+{
+	irq = irq;
+	s3c_irq_demux_uart(IRQ_S3CUART_RX2);
+}
+
+static void
+s3c_irq_demux_extint8(unsigned int irq,
+		      struct irq_desc *desc)
+{
+	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+	eintpnd &= ~eintmsk;
+	eintpnd &= ~0xff;	/* ignore lower irqs */
+
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
+		desc_handle_irq(irq, irq_desc + irq);
+	}
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+			struct irq_desc *desc)
+{
+	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+	eintpnd &= ~eintmsk;
+	eintpnd &= 0xff;	/* only lower irqs */
+
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
+
+		desc_handle_irq(irq, irq_desc + irq);
+	}
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2410_INTMSK),
+	SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+	s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+	s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+	return 0;
+}
+
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+void __init s3c24xx_init_irq(void)
+{
+	unsigned long pend;
+	unsigned long last;
+	int irqno;
+	int i;
+
+	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
+
+	/* first, clear all interrupts pending... */
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C24XX_EINTPEND);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, S3C24XX_EINTPEND);
+		printk("irq: clearing pending ext status %08x\n", (int)pend);
+		last = pend;
+	}
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C2410_INTPND);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, S3C2410_SRCPND);
+		__raw_writel(pend, S3C2410_INTPND);
+		printk("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
+	}
+
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C2410_SUBSRCPND);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		printk("irq: clearing subpending status %08x\n", (int)pend);
+		__raw_writel(pend, S3C2410_SUBSRCPND);
+		last = pend;
+	}
+
+	/* register the main interrupts */
+
+	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
+
+	for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
+		/* set all the s3c2410 internal irqs */
+
+		switch (irqno) {
+			/* deal with the special IRQs (cascaded) */
+
+		case IRQ_EINT4t7:
+		case IRQ_EINT8t23:
+		case IRQ_UART0:
+		case IRQ_UART1:
+		case IRQ_UART2:
+		case IRQ_ADCPARENT:
+			set_irq_chip(irqno, &s3c_irq_level_chip);
+			set_irq_handler(irqno, handle_level_irq);
+			break;
+
+		case IRQ_RESERVED6:
+		case IRQ_RESERVED24:
+			/* no IRQ here */
+			break;
+
+		default:
+			//irqdbf("registering irq %d (s3c irq)\n", irqno);
+			set_irq_chip(irqno, &s3c_irq_chip);
+			set_irq_handler(irqno, handle_edge_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+		}
+	}
+
+	/* setup the cascade irq handlers */
+
+	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
+
+	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
+	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
+	set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
+	set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
+
+	/* external interrupts */
+
+	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+		irqdbf("registering irq %d (ext int)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_eint0t4);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
+		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irqext_chip);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	/* register the uart interrupts */
+
+	irqdbf("s3c2410: registering external interrupts\n");
+
+	for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
+		irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_uart0);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
+		irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_uart1);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
+		irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_uart2);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
+		irqdbf("registering irq %d (s3c adc irq)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_adc);
+		set_irq_handler(irqno, handle_edge_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	irqdbf("s3c2410: registered interrupt handlers\n");
+}
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index 619133eb7168..bd965f2feeca 100644
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/pm-simtec.c
+/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -32,7 +32,7 @@
 
 #include <asm/mach-types.h>
 
-#include "pm.h"
+#include <asm/plat-s3c24xx/pm.h>
 
 #define COPYRIGHT ", (c) 2005 Simtec Electronics"
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
new file mode 100644
index 000000000000..c6b03f8ab260
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -0,0 +1,633 @@
+/* linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Power Manager (Suspend-To-RAM) support
+ *
+ * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Parts based on arch/arm/mach-pxa/pm.c
+ *
+ * Thanks to Dimitry Andric for debugging
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-irq.h>
+
+#include <asm/mach/time.h>
+
+#include <asm/plat-s3c24xx/pm.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+#define PFX "s3c24xx-pm: "
+
+static struct sleep_save core_save[] = {
+	SAVE_ITEM(S3C2410_LOCKTIME),
+	SAVE_ITEM(S3C2410_CLKCON),
+
+	/* we restore the timings here, with the proviso that the board
+	 * brings the system up in an slower, or equal frequency setting
+	 * to the original system.
+	 *
+	 * if we cannot guarantee this, then things are going to go very
+	 * wrong here, as we modify the refresh and both pll settings.
+	 */
+
+	SAVE_ITEM(S3C2410_BWSCON),
+	SAVE_ITEM(S3C2410_BANKCON0),
+	SAVE_ITEM(S3C2410_BANKCON1),
+	SAVE_ITEM(S3C2410_BANKCON2),
+	SAVE_ITEM(S3C2410_BANKCON3),
+	SAVE_ITEM(S3C2410_BANKCON4),
+	SAVE_ITEM(S3C2410_BANKCON5),
+
+	SAVE_ITEM(S3C2410_CLKDIVN),
+	SAVE_ITEM(S3C2410_MPLLCON),
+	SAVE_ITEM(S3C2410_UPLLCON),
+	SAVE_ITEM(S3C2410_CLKSLOW),
+	SAVE_ITEM(S3C2410_REFRESH),
+};
+
+static struct sleep_save gpio_save[] = {
+	SAVE_ITEM(S3C2410_GPACON),
+	SAVE_ITEM(S3C2410_GPADAT),
+
+	SAVE_ITEM(S3C2410_GPBCON),
+	SAVE_ITEM(S3C2410_GPBDAT),
+	SAVE_ITEM(S3C2410_GPBUP),
+
+	SAVE_ITEM(S3C2410_GPCCON),
+	SAVE_ITEM(S3C2410_GPCDAT),
+	SAVE_ITEM(S3C2410_GPCUP),
+
+	SAVE_ITEM(S3C2410_GPDCON),
+	SAVE_ITEM(S3C2410_GPDDAT),
+	SAVE_ITEM(S3C2410_GPDUP),
+
+	SAVE_ITEM(S3C2410_GPECON),
+	SAVE_ITEM(S3C2410_GPEDAT),
+	SAVE_ITEM(S3C2410_GPEUP),
+
+	SAVE_ITEM(S3C2410_GPFCON),
+	SAVE_ITEM(S3C2410_GPFDAT),
+	SAVE_ITEM(S3C2410_GPFUP),
+
+	SAVE_ITEM(S3C2410_GPGCON),
+	SAVE_ITEM(S3C2410_GPGDAT),
+	SAVE_ITEM(S3C2410_GPGUP),
+
+	SAVE_ITEM(S3C2410_GPHCON),
+	SAVE_ITEM(S3C2410_GPHDAT),
+	SAVE_ITEM(S3C2410_GPHUP),
+
+	SAVE_ITEM(S3C2410_DCLKCON),
+};
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+#define SAVE_UART(va) \
+	SAVE_ITEM((va) + S3C2410_ULCON), \
+	SAVE_ITEM((va) + S3C2410_UCON), \
+	SAVE_ITEM((va) + S3C2410_UFCON), \
+	SAVE_ITEM((va) + S3C2410_UMCON), \
+	SAVE_ITEM((va) + S3C2410_UBRDIV)
+
+static struct sleep_save uart_save[] = {
+	SAVE_UART(S3C24XX_VA_UART0),
+	SAVE_UART(S3C24XX_VA_UART1),
+#ifndef CONFIG_CPU_S3C2400
+	SAVE_UART(S3C24XX_VA_UART2),
+#endif
+};
+
+/* debug
+ *
+ * we send the debug to printascii() to allow it to be seen if the
+ * system never wakes up from the sleep
+*/
+
+extern void printascii(const char *);
+
+void pm_dbg(const char *fmt, ...)
+{
+	va_list va;
+	char buff[256];
+
+	va_start(va, fmt);
+	vsprintf(buff, fmt, va);
+	va_end(va);
+
+	printascii(buff);
+}
+
+static void s3c2410_pm_debug_init(void)
+{
+	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+	/* re-start uart clocks */
+	tmp |= S3C2410_CLKCON_UART0;
+	tmp |= S3C2410_CLKCON_UART1;
+	tmp |= S3C2410_CLKCON_UART2;
+
+	__raw_writel(tmp, S3C2410_CLKCON);
+	udelay(10);
+}
+
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+
+#define s3c2410_pm_debug_init() do { } while(0)
+
+static struct sleep_save uart_save[] = {};
+#endif
+
+#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size;	/* size needed for the crc block */
+static u32 *crcs;	/* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c2410_pm_run_res
+ *
+ * go thorugh the given resource list, and look for system ram
+*/
+
+static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+	while (ptr != NULL) {
+		if (ptr->child != NULL)
+			s3c2410_pm_run_res(ptr->child, fn, arg);
+
+		if ((ptr->flags & IORESOURCE_MEM) &&
+		    strcmp(ptr->name, "System RAM") == 0) {
+			DBG("Found system RAM at %08lx..%08lx\n",
+			    ptr->start, ptr->end);
+			arg = (fn)(ptr, arg);
+		}
+
+		ptr = ptr->sibling;
+	}
+}
+
+static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+	s3c2410_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
+{
+	u32 size = (u32)(res->end - res->start)+1;
+
+	size += CHECK_CHUNKSIZE-1;
+	size /= CHECK_CHUNKSIZE;
+
+	DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+
+	*val += size * sizeof(u32);
+	return val;
+}
+
+/* s3c2410_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+static void s3c2410_pm_check_prepare(void)
+{
+	crc_size = 0;
+
+	s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+
+	DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+
+	crcs = kmalloc(crc_size+4, GFP_KERNEL);
+	if (crcs == NULL)
+		printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
+{
+	unsigned long addr, left;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		*val = crc32_le(~0, phys_to_virt(addr), left);
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c2410_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+static void s3c2410_pm_check_store(void)
+{
+	if (crcs != NULL)
+		s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contatins the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+	if ((what+whatsz) < ptr)
+		return 0;
+
+	if (what > (ptr+size))
+		return 0;
+
+	return 1;
+}
+
+static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
+{
+	void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
+	unsigned long addr;
+	unsigned long left;
+	void *ptr;
+	u32 calc;
+
+	for (addr = res->start; addr < res->end;
+	     addr += CHECK_CHUNKSIZE) {
+		left = res->end - addr;
+
+		if (left > CHECK_CHUNKSIZE)
+			left = CHECK_CHUNKSIZE;
+
+		ptr = phys_to_virt(addr);
+
+		if (in_region(ptr, left, crcs, crc_size)) {
+			DBG("skipping %08lx, has crc block in\n", addr);
+			goto skip_check;
+		}
+
+		if (in_region(ptr, left, save_at, 32*4 )) {
+			DBG("skipping %08lx, has save block in\n", addr);
+			goto skip_check;
+		}
+
+		/* calculate and check the checksum */
+
+		calc = crc32_le(~0, ptr, left);
+		if (calc != *val) {
+			printk(KERN_ERR PFX "Restore CRC error at "
+			       "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+			DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+			    addr, calc, *val);
+		}
+
+	skip_check:
+		val++;
+	}
+
+	return val;
+}
+
+/* s3c2410_pm_check_restore
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+
+static void s3c2410_pm_check_restore(void)
+{
+	if (crcs != NULL) {
+		s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
+		kfree(crcs);
+		crcs = NULL;
+	}
+}
+
+#else
+
+#define s3c2410_pm_check_prepare() do { } while(0)
+#define s3c2410_pm_check_restore() do { } while(0)
+#define s3c2410_pm_check_store()   do { } while(0)
+#endif
+
+/* helper functions to save and restore register state */
+
+void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = __raw_readl(ptr->reg);
+		DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/* s3c2410_pm_do_restore
+ *
+ * restore the system from the given list of saved registers
+ *
+ * Note, we do not use DBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+		       ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/* s3c2410_pm_do_restore_core
+ *
+ * similar to s3c2410_pm_do_restore_core
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		__raw_writel(ptr->val, ptr->reg);
+	}
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+
+static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
+					unsigned long mask)
+{
+	int i;
+
+	which &= ~mask;
+
+	for (i = 0; i <= 31; i++) {
+		if ((which) & (1L<<i)) {
+			DBG("IRQ %d asserted at resume\n", start+i);
+		}
+	}
+}
+
+/* s3c2410_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+	unsigned long irqstate;
+	unsigned long pinstate;
+	int irq = s3c2410_gpio_getirq(pin);
+
+	if (irqoffs < 4)
+		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+	else
+		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+	pinstate = s3c2410_gpio_getcfg(pin);
+
+	if (!irqstate) {
+		if (pinstate == S3C2410_GPIO_IRQ)
+			DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+	} else {
+		if (pinstate == S3C2410_GPIO_IRQ) {
+			DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+		}
+	}
+}
+
+/* s3c2410_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+static void s3c2410_pm_configure_extint(void)
+{
+	int pin;
+
+	/* for each of the external interrupts (EINT0..EINT15) we
+	 * need to check wether it is an external interrupt source,
+	 * and then configure it as an input if it is not
+	*/
+
+	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
+		s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+	}
+
+	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
+		s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	}
+}
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c2410_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c2410_pm_enter(suspend_state_t state)
+{
+	unsigned long regs_save[16];
+
+	/* ensure the debug is initialised (if enabled) */
+
+	s3c2410_pm_debug_init();
+
+	DBG("s3c2410_pm_enter(%d)\n", state);
+
+	if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+		printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+		return -EINVAL;
+	}
+
+	/* check if we have anything to wake-up with... bad things seem
+	 * to happen if you suspend with no wakeup (system will often
+	 * require a full power-cycle)
+	*/
+
+	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+		printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
+		printk(KERN_ERR PFX "Aborting sleep\n");
+		return -EINVAL;
+	}
+
+	/* prepare check area if configured */
+
+	s3c2410_pm_check_prepare();
+
+	/* store the physical address of the register recovery block */
+
+	s3c2410_sleep_save_phys = virt_to_phys(regs_save);
+
+	DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
+
+	/* save all necessary core registers not covered by the drivers */
+
+	s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+	s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
+	s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+
+	/* set the irq configuration for wake */
+
+	s3c2410_pm_configure_extint();
+
+	DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+	    s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+	/* ack any outstanding external interrupts before we go to sleep */
+
+	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+	/* call cpu specific preperation */
+
+	pm_cpu_prep();
+
+	/* flush cache back to ram */
+
+	flush_cache_all();
+
+	s3c2410_pm_check_store();
+
+	/* send the cpu to sleep... */
+
+	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
+
+	/* s3c2410_cpu_save will also act as our return point from when
+	 * we resume as it saves its own register state, so use the return
+	 * code to differentiate return from save and return from sleep */
+
+	if (s3c2410_cpu_save(regs_save) == 0) {
+		flush_cache_all();
+		pm_cpu_sleep();
+	}
+
+	/* restore the cpu state */
+
+	cpu_init();
+
+	/* restore the system state */
+
+	s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+	s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+	s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+
+	s3c2410_pm_debug_init();
+
+	/* check what irq (if any) restored the system */
+
+	DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+	    __raw_readl(S3C2410_SRCPND),
+	    __raw_readl(S3C2410_EINTPEND));
+
+	s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+				    s3c_irqwake_intmask);
+
+	s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+				    s3c_irqwake_eintmask);
+
+	DBG("post sleep, preparing to return\n");
+
+	s3c2410_pm_check_restore();
+
+	/* ok, let's return from sleep */
+
+	DBG("S3C2410 PM Resume (post-restore)\n");
+	return 0;
+}
+
+static struct pm_ops s3c2410_pm_ops = {
+	.enter		= s3c2410_pm_enter,
+	.valid		= pm_valid_only_mem,
+};
+
+/* s3c2410_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c2410_pm_init(void)
+{
+	printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
+
+	pm_set_ops(&s3c2410_pm_ops);
+	return 0;
+}
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index ede94636a72a..a0e39d894014 100644
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c
+/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
  *
  * Copyright (c) 2003,2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -35,9 +35,9 @@
 #include <asm/arch/regs-irq.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
 
 /* camera irq */
 
diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 23c7494ad10d..767f2e9a3a55 100644
--- a/arch/arm/mach-s3c2410/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s3c2410/s3c244x.c
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
  *
  * Copyright (c) 2004-2006 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
- * Samsung S3C2440 and S3C2442 Mobile CPU support
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -35,13 +35,13 @@
 #include <asm/arch/regs-gpioj.h>
 #include <asm/arch/regs-dsc.h>
 
-#include "s3c2410.h"
-#include "s3c2440.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
 #include "s3c244x.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
index 1488c1eb37e6..f8ed17676a35 100644
--- a/arch/arm/mach-s3c2410/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/s3c244x.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/s3c244x.h
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
new file mode 100644
index 000000000000..435349dc3243
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s3c2410/sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+*/
+//#define CONFIG_DEBUG_RESUME
+
+	.text
+
+	/* s3c2410_cpu_save
+	 *
+	 * save enough of the CPU state to allow us to re-start
+	 * pm.c code. as we store items like the sp/lr, we will
+	 * end up returning from this function when the cpu resumes
+	 * so the return value is set to mark this.
+	 *
+	 * This arangement means we avoid having to flush the cache
+	 * from this code.
+	 *
+	 * entry:
+	 *	r0 = pointer to save block
+	 *
+	 * exit:
+	 *	r0 = 0 => we stored everything
+	 *	     1 => resumed from sleep
+	*/
+
+ENTRY(s3c2410_cpu_save)
+	stmfd	sp!, { r4 - r12, lr }
+
+	@@ store co-processor registers
+
+	mrc	p15, 0, r4, c13, c0, 0	@ PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ translation table base address
+	mrc	p15, 0, r7, c1, c0, 0	@ control register
+
+	stmia	r0, { r4 - r13 }
+
+	mov	r0, #0
+	ldmfd	sp, { r4 - r12, pc }
+
+	@@ return to the caller, after having the MMU
+	@@ turned on, this restores the last bits from the
+	@@ stack
+resume_with_mmu:
+	mov	r0, #1
+	ldmfd	sp!, { r4 - r12, pc }
+
+	.ltorg
+
+	@@ the next bits sit in the .data segment, even though they
+	@@ happen to be code... the s3c2410_sleep_save_phys needs to be
+	@@ accessed by the resume code before it can restore the MMU.
+	@@ This means that the variable has to be close enough for the
+	@@ code to read it... since the .text segment needs to be RO,
+	@@ the data segment can be the only place to put this code.
+
+	.data
+
+	.global	s3c2410_sleep_save_phys
+s3c2410_sleep_save_phys:
+	.word	0
+
+	/* s3c2410_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 *
+	 * we must put this code here in the data segment as we have no
+	 * other way of restoring the stack pointer after sleep, and we
+	 * must not write to the code segment (code is read-only)
+	*/
+
+ENTRY(s3c2410_cpu_resume)
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	msr	cpsr_c, r0
+
+	@@ load UART to allow us to print the two characters for
+	@@ resume debug
+
+	mov	r2, #S3C24XX_PA_UART & 0xff000000
+	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+	/* SMDK2440 LED set */
+	mov	r14, #S3C24XX_PA_GPIO
+	ldr	r12, [ r14, #0x54 ]
+	bic	r12, r12, #3<<4
+	orr	r12, r12, #1<<7
+	str	r12, [ r14, #0x54 ]
+#endif
+
+#ifdef CONFIG_DEBUG_RESUME
+	mov	r3, #'L'
+	strb	r3, [ r2, #S3C2410_UTXH ]
+1001:
+	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
+	tst	r14, #S3C2410_UTRSTAT_TXE
+	beq	1001b
+#endif /* CONFIG_DEBUG_RESUME */
+
+	mov	r1, #0
+	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
+	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
+
+	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
+	ldmia	r0, { r4 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0		@ PID
+	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
+	mcr	p15, 0, r6, c2, c0, 0		@ translation table base
+
+#ifdef CONFIG_DEBUG_RESUME
+	mov	r3, #'R'
+	strb	r3, [ r2, #S3C2410_UTXH ]
+#endif
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r7, c1, c0, 0		@ turn on MMU, etc
+	nop					@ second-to-last before mmu
+	mov	pc, r2				@ go back to virtual address
+
+	.ltorg
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/plat-s3c24xx/time.c
index 9910bf0f2cea..c523d1c9cce5 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/time.c
+/* linux/arch/arm/plat-s3c24xx/time.c
  *
  * Copyright (C) 2003-2005 Simtec Electronics
  *	Ben Dooks, <ben@simtec.co.uk>
@@ -37,8 +37,8 @@
 #include <asm/arch/regs-irq.h>
 #include <asm/mach/time.h>
 
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index bd78058b7178..b1142ce4ac47 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Tue Jan 16 16:52:56 2007
+# Last update: Mon Apr 16 21:01:04 2007
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1190,13 +1190,12 @@ g500			MACH_G500		G500			1178
 bug			MACH_BUG		BUG			1179
 mx33ads			MACH_MX33ADS		MX33ADS			1180
 chub			MACH_CHUB		CHUB			1181
-gta01			MACH_GTA01		GTA01			1182
+neo1973_gta01		MACH_NEO1973_GTA01	NEO1973_GTA01		1182
 w90n740			MACH_W90N740		W90N740			1183
 medallion_sa2410	MACH_MEDALLION_SA2410	MEDALLION_SA2410	1184
 ia_cpu_9200_2		MACH_IA_CPU_9200_2	IA_CPU_9200_2		1185
 dimmrm9200		MACH_DIMMRM9200		DIMMRM9200		1186
 pm9261			MACH_PM9261		PM9261			1187
-mx21			MACH_MX21		MX21			1188
 ml7304			MACH_ML7304		ML7304			1189
 ucp250			MACH_UCP250		UCP250			1190
 intboard		MACH_INTBOARD		INTBOARD		1191
@@ -1242,3 +1241,97 @@ xscale_treo680		MACH_XSCALE_TREO680	XSCALE_TREO680		1230
 tecon_tmezon		MACH_TECON_TMEZON	TECON_TMEZON		1231
 zylonite		MACH_ZYLONITE		ZYLONITE		1233
 gene1270		MACH_GENE1270		GENE1270		1234
+zir2412			MACH_ZIR2412		ZIR2412			1235
+mx31lite		MACH_MX31LITE		MX31LITE		1236
+t700wx			MACH_T700WX		T700WX			1237
+vf100			MACH_VF100		VF100			1238
+nsb2			MACH_NSB2		NSB2			1239
+nxhmi_bb		MACH_NXHMI_BB		NXHMI_BB		1240
+nxhmi_re		MACH_NXHMI_RE		NXHMI_RE		1241
+n4100pro		MACH_N4100PRO		N4100PRO		1242
+sam9260			MACH_SAM9260		SAM9260			1243
+omap_treo600		MACH_OMAP_TREO600	OMAP_TREO600		1244
+indy2410		MACH_INDY2410		INDY2410		1245
+nelt_a			MACH_NELT_A		NELT_A			1246
+n311			MACH_N311		N311			1248
+at91sam9260vgk		MACH_AT91SAM9260VGK	AT91SAM9260VGK		1249
+at91leppe		MACH_AT91LEPPE		AT91LEPPE		1250
+at91lepccn		MACH_AT91LEPCCN		AT91LEPCCN		1251
+apc7100			MACH_APC7100		APC7100			1252
+stargazer		MACH_STARGAZER		STARGAZER		1253
+sonata			MACH_SONATA		SONATA			1254
+schmoogie		MACH_SCHMOOGIE		SCHMOOGIE		1255
+aztool			MACH_AZTOOL		AZTOOL			1256
+mioa701			MACH_MIOA701		MIOA701			1257
+sxni9260		MACH_SXNI9260		SXNI9260		1258
+mxc27520evb		MACH_MXC27520EVB	MXC27520EVB		1259
+armadillo5x0		MACH_ARMADILLO5X0	ARMADILLO5X0		1260
+mb9260			MACH_MB9260		MB9260			1261
+mb9263			MACH_MB9263		MB9263			1262
+ipac9302		MACH_IPAC9302		IPAC9302		1263
+cc9p9360js		MACH_CC9P9360JS		CC9P9360JS		1264
+gallium			MACH_GALLIUM		GALLIUM			1265
+msc2410			MACH_MSC2410		MSC2410			1266
+ghi270			MACH_GHI270		GHI270			1267
+davinci_leonardo	MACH_DAVINCI_LEONARDO	DAVINCI_LEONARDO	1268
+oiab			MACH_OIAB		OIAB			1269
+smdk6400		MACH_SMDK6400		SMDK6400		1270
+nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
+greenphone		MACH_GREENPHONE		GREENPHONE		1272
+compex42x		MACH_COMPEXWP18		COMPEXWP18		1273
+xmate			MACH_XMATE		XMATE			1274
+energizer		MACH_ENERGIZER		ENERGIZER		1275
+ime1			MACH_IME1		IME1			1276
+sweda_tms		MACH_SWEDATMS		SWEDATMS		1277
+ntnp435c		MACH_NTNP435C		NTNP435C		1278
+spectro2		MACH_SPECTRO2		SPECTRO2		1279
+h6039			MACH_H6039		H6039			1280
+ep80219			MACH_EP80219		EP80219			1281
+samoa_ii		MACH_SAMOA_II		SAMOA_II		1282
+cwmxl			MACH_CWMXL		CWMXL			1283
+as9200			MACH_AS9200		AS9200			1284
+sfx1149			MACH_SFX1149		SFX1149			1285
+navi010			MACH_NAVI010		NAVI010			1286
+multmdp			MACH_MULTMDP		MULTMDP			1287
+scb9520			MACH_SCB9520		SCB9520			1288
+htcathena		MACH_HTCATHENA		HTCATHENA		1289
+xp179			MACH_XP179		XP179			1290
+h4300			MACH_H4300		H4300			1291
+goramo_mlr		MACH_GORAMO_MLR		GORAMO_MLR		1292
+mxc30020evb		MACH_MXC30020EVB	MXC30020EVB		1293
+adsbitsymx		MACH_ADSBITSIMX		ADSBITSIMX		1294
+adsportalplus		MACH_ADSPORTALPLUS	ADSPORTALPLUS		1295
+mmsp2plus		MACH_MMSP2PLUS		MMSP2PLUS		1296
+em_x270			MACH_EM_X270		EM_X270			1297
+tpp302			MACH_TPP302		TPP302			1298
+tpp104			MACH_TPM104		TPM104			1299
+tpm102			MACH_TPM102		TPM102			1300
+tpm109			MACH_TPM109		TPM109			1301
+fbxo1			MACH_FBXO1		FBXO1			1302
+hxd8			MACH_HXD8		HXD8			1303
+neo1973_gta02		MACH_NEO1973_GTA02	NEO1973_GTA02		1304
+emtest			MACH_EMTEST		EMTEST			1305
+ad6900			MACH_AD6900		AD6900			1306
+europa			MACH_EUROPA		EUROPA			1307
+metroconnect		MACH_METROCONNECT	METROCONNECT		1308
+ez_s2410		MACH_EZ_S2410		EZ_S2410		1309
+ez_s2440		MACH_EZ_S2440		EZ_S2440		1310
+ez_ep9312		MACH_EZ_EP9312		EZ_EP9312		1311
+ez_ep9315		MACH_EZ_EP9315		EZ_EP9315		1312
+ez_x7			MACH_EZ_X7		EZ_X7			1313
+godotdb			MACH_GODOTDB		GODOTDB			1314
+mistral			MACH_MISTRAL		MISTRAL			1315
+msm			MACH_MSM		MSM			1316
+ct5910			MACH_CT5910		CT5910			1317
+ct5912			MACH_CT5912		CT5912			1318
+hynet_ine		MACH_HYNET_INE		HYNET_INE		1319
+hynet_app		MACH_HYNET_APP		HYNET_APP		1320
+msm7200			MACH_MSM7200		MSM7200			1321
+msm7600			MACH_MSM7600		MSM7600			1322
+ceb255			MACH_CEB255		CEB255			1323
+ciel			MACH_CIEL		CIEL			1324
+slm5650			MACH_SLM5650		SLM5650			1325
+at91sam9rlek		MACH_AT91SAM9RLEK	AT91SAM9RLEK		1326
+comtech_router		MACH_COMTECH_ROUTER	COMTECH_ROUTER		1327
+sbc2410x		MACH_SBC2410X		SBC2410X		1328
+at4x0bd			MACH_AT4X0BD		AT4X0BD			1329
diff --git a/arch/arm26/kernel/entry.S b/arch/arm26/kernel/entry.S
index 6d910ea43d34..91496cc687b1 100644
--- a/arch/arm26/kernel/entry.S
+++ b/arch/arm26/kernel/entry.S
@@ -245,11 +245,6 @@ ENTRY(vector_swi)
 	zero_fp
 	get_scno
 
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldr	ip, __cr_alignment
-	ldr	ip, [ip]
-	mcr	p15, 0, ip, c1, c0		@ update control register
-#endif
 	enable_irqs ip
 
 	str	r4, [sp, #-S_OFF]!		@ push fifth arg
@@ -299,11 +294,6 @@ __sys_trace_return:
 	b	ret_slow_syscall
 
 	.align	5
-#ifdef CONFIG_ALIGNMENT_TRAP
-	.type	__cr_alignment, #object
-__cr_alignment:
-	.word	cr_alignment
-#endif
 
 	.type	sys_call_table, #object
 ENTRY(sys_call_table)
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index bb059a4e1df9..3ec76586877e 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -22,6 +22,10 @@ config AVR32
 config UID16
 	bool
 
+config GENERIC_GPIO
+	bool
+	default y
+
 config GENERIC_HARDIRQS
 	bool
 	default y
@@ -53,9 +57,6 @@ config ARCH_HAS_ILOG2_U64
 	bool
 	default n
 
-config GENERIC_BUST_SPINLOCK
-	bool
-
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -64,6 +65,11 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
 source "init/Kconfig"
 
 menu "System Type and features"
@@ -102,6 +108,9 @@ choice
 config BOARD_ATSTK1000
 	bool "ATSTK1000 evaluation board"
 	select BOARD_ATSTK1002 if CPU_AT32AP7000
+
+config BOARD_ATNGW100
+	bool "ATNGW100 Network Gateway"
 endchoice
 
 choice
@@ -112,6 +121,8 @@ config	LOADER_U_BOOT
 	bool "U-Boot (or similar) bootloader"
 endchoice
 
+source "arch/avr32/mach-at32ap/Kconfig"
+
 config LOAD_ADDRESS
 	hex
 	default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 7b842e98efed..6115fc1f0cfa 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -27,6 +27,7 @@ head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
 head-y					+= arch/avr32/kernel/head.o
 core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
+core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
 core-y					+= arch/avr32/kernel/
 core-y					+= arch/avr32/mm/
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
new file mode 100644
index 000000000000..c740aa116755
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -0,0 +1 @@
+obj-y				+= setup.o flash.o
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
new file mode 100644
index 000000000000..f9b32a8eab9b
--- /dev/null
+++ b/arch/avr32/boards/atngw100/flash.c
@@ -0,0 +1,95 @@
+/*
+ * ATNGW100 board-specific flash initialization
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/arch/smc.h>
+
+static struct smc_config flash_config __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 40,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 80,
+	.nrd_pulse		= 40,
+	.ncs_write_pulse	= 65,
+	.nwe_pulse		= 55,
+
+	.read_cycle		= 120,
+	.write_cycle		= 120,
+
+	.bus_width		= 2,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.byte_write		= 1,
+};
+
+static struct mtd_partition flash_parts[] = {
+	{
+		.name           = "u-boot",
+		.offset         = 0x00000000,
+		.size           = 0x00020000,           /* 128 KiB */
+		.mask_flags     = MTD_WRITEABLE,
+	},
+	{
+		.name           = "root",
+		.offset         = 0x00020000,
+		.size           = 0x007d0000,
+	},
+	{
+		.name           = "env",
+		.offset         = 0x007f0000,
+		.size           = 0x00010000,
+		.mask_flags     = MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(flash_parts),
+	.parts		= flash_parts,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x007fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/* This needs to be called after the SMC has been initialized */
+static int __init atngw100_flash_init(void)
+{
+	int ret;
+
+	ret = smc_set_configuration(0, &flash_config);
+	if (ret < 0) {
+		printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
+		return ret;
+	}
+
+	platform_device_register(&flash_device);
+
+	return 0;
+}
+device_initcall(atngw100_flash_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
new file mode 100644
index 000000000000..9bc37d4f6687
--- /dev/null
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -0,0 +1,124 @@
+/*
+ * Board-specific setup code for the ATNGW100 Network Gateway
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/spi/spi.h>
+
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <asm/arch/at32ap7000.h>
+#include <asm/arch/board.h>
+#include <asm/arch/init.h>
+
+/* Initialized by bootloader-specific startup code. */
+struct tag *bootloader_tags __initdata;
+
+struct eth_addr {
+	u8 addr[6];
+};
+static struct eth_addr __initdata hw_addr[2];
+static struct eth_platform_data __initdata eth_data[2];
+
+static struct spi_board_info spi0_board_info[] __initdata = {
+	{
+		.modalias	= "mtd_dataflash",
+		.max_speed_hz	= 10000000,
+		.chip_select	= 0,
+	},
+};
+
+/*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+ * ethernet address. But we need to keep it around for a while until
+ * we can be reasonably sure the boot loader does this.
+ *
+ * The phy_id is ignored as the driver will probe for it.
+ */
+static int __init parse_tag_ethernet(struct tag *tag)
+{
+	int i;
+
+	i = tag->u.ethernet.mac_index;
+	if (i < ARRAY_SIZE(hw_addr))
+		memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
+		       sizeof(hw_addr[i].addr));
+
+	return 0;
+}
+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
+
+static void __init set_hw_addr(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	const u8 *addr;
+	void __iomem *regs;
+	struct clk *pclk;
+
+	if (!res)
+		return;
+	if (pdev->id >= ARRAY_SIZE(hw_addr))
+		return;
+
+	addr = hw_addr[pdev->id].addr;
+	if (!is_valid_ether_addr(addr))
+		return;
+
+	/*
+	 * Since this is board-specific code, we'll cheat and use the
+	 * physical address directly as we happen to know that it's
+	 * the same as the virtual address.
+	 */
+	regs = (void __iomem __force *)res->start;
+	pclk = clk_get(&pdev->dev, "pclk");
+	if (!pclk)
+		return;
+
+	clk_enable(pclk);
+	__raw_writel((addr[3] << 24) | (addr[2] << 16)
+		     | (addr[1] << 8) | addr[0], regs + 0x98);
+	__raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
+	clk_disable(pclk);
+	clk_put(pclk);
+}
+
+struct platform_device *at32_usart_map[1];
+unsigned int at32_nr_usarts = 1;
+
+void __init setup_board(void)
+{
+	at32_map_usart(1, 0);	/* USART 1: /dev/ttyS0, DB9 */
+	at32_setup_serial_console(0);
+}
+
+static int __init atngw100_init(void)
+{
+	/*
+	 * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
+	 * reserve any pins for it.
+	 */
+
+	at32_add_system_devices();
+
+	at32_add_device_usart(0);
+
+	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+
+	return 0;
+}
+postcore_initcall(atngw100_init);
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 5974768a59e5..abe6ca203fa7 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -33,7 +33,7 @@ struct eth_addr {
 static struct eth_addr __initdata hw_addr[2];
 
 static struct eth_platform_data __initdata eth_data[2];
-extern struct lcdc_platform_data atstk1000_fb0_data;
+static struct lcdc_platform_data atstk1000_fb0_data;
 
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
@@ -148,6 +148,8 @@ static int __init atstk1002_init(void)
 	set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
 
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	atstk1000_fb0_data.fbmem_start = fbmem_start;
+	atstk1000_fb0_data.fbmem_size = fbmem_size;
 	at32_add_device_lcdc(0, &atstk1000_fb0_data);
 
 	return 0;
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 272c011802a7..2bc4b88d7edb 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -18,33 +18,3 @@
 
 /* Initialized by bootloader-specific startup code. */
 struct tag *bootloader_tags __initdata;
-
-struct lcdc_platform_data __initdata atstk1000_fb0_data;
-
-void __init board_setup_fbmem(unsigned long fbmem_start,
-			      unsigned long fbmem_size)
-{
-	if (!fbmem_size)
-		return;
-
-	if (!fbmem_start) {
-		void *fbmem;
-
-		fbmem = alloc_bootmem_low_pages(fbmem_size);
-		fbmem_start = __pa(fbmem);
-	} else {
-		pg_data_t *pgdat;
-
-		for_each_online_pgdat(pgdat) {
-			if (fbmem_start >= pgdat->bdata->node_boot_start
-			    && fbmem_start <= pgdat->bdata->node_low_pfn)
-				reserve_bootmem_node(pgdat, fbmem_start,
-						     fbmem_size);
-		}
-	}
-
-	printk("%luKiB framebuffer memory at address 0x%08lx\n",
-	       fbmem_size >> 10, fbmem_start);
-	atstk1000_fb0_data.fbmem_start = fbmem_start;
-	atstk1000_fb0_data.fbmem_size = fbmem_size;
-}
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
new file mode 100644
index 000000000000..c254ffcfa458
--- /dev/null
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -0,0 +1,1085 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc6
+# Thu Apr 12 16:35:07 2007
+#
+CONFIG_AVR32=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=1
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type and features
+#
+CONFIG_SUBARCH_AVR32B=y
+CONFIG_MMU=y
+CONFIG_PERFORMANCE_COUNTERS=y
+CONFIG_PLATFORM_AT32AP=y
+CONFIG_CPU_AT32AP7000=y
+# CONFIG_BOARD_ATSTK1000 is not set
+CONFIG_BOARD_ATNGW100=y
+CONFIG_LOADER_U_BOOT=y
+
+#
+# Atmel AVR32 AP options
+#
+# CONFIG_AP7000_32_BIT_SMC is not set
+CONFIG_AP7000_16_BIT_SMC=y
+# CONFIG_AP7000_8_BIT_SMC is not set
+CONFIG_LOAD_ADDRESS=0x10000000
+CONFIG_ENTRY_ADDRESS=0x90000000
+CONFIG_PHYS_OFFSET=0x10000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
+# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
+# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_CMDLINE=""
+
+#
+# Bus options
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+# CONFIG_NF_CT_PROTO_SCTP is not set
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x80000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_KPROBES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index 2e72fd2699df..2714cf6452b5 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -209,16 +209,17 @@ static const char *mmu_types[] = {
 void __init setup_processor(void)
 {
 	unsigned long config0, config1;
+	unsigned long features;
 	unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
 	unsigned tmp;
 
-	config0 = sysreg_read(CONFIG0); /* 0x0000013e; */
-	config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */
-	cpu_id = config0 >> 24;
-	cpu_rev = (config0 >> 16) & 0xff;
-	arch_id = (config0 >> 13) & 0x07;
-	arch_rev = (config0 >> 10) & 0x07;
-	mmu_type = (config0 >> 7) & 0x03;
+	config0 = sysreg_read(CONFIG0);
+	config1 = sysreg_read(CONFIG1);
+	cpu_id = SYSREG_BFEXT(PROCESSORID, config0);
+	cpu_rev = SYSREG_BFEXT(PROCESSORREVISION, config0);
+	arch_id = SYSREG_BFEXT(AT, config0);
+	arch_rev = SYSREG_BFEXT(AR, config0);
+	mmu_type = SYSREG_BFEXT(MMUT, config0);
 
 	boot_cpu_data.arch_type = arch_id;
 	boot_cpu_data.cpu_type = cpu_id;
@@ -226,16 +227,16 @@ void __init setup_processor(void)
 	boot_cpu_data.cpu_revision = cpu_rev;
 	boot_cpu_data.tlb_config = mmu_type;
 
-	tmp = (config1 >> 13) & 0x07;
+	tmp = SYSREG_BFEXT(ILSZ, config1);
 	if (tmp) {
-		boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07);
-		boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f);
+		boot_cpu_data.icache.ways = 1 << SYSREG_BFEXT(IASS, config1);
+		boot_cpu_data.icache.sets = 1 << SYSREG_BFEXT(ISET, config1);
 		boot_cpu_data.icache.linesz = 1 << (tmp + 1);
 	}
-	tmp = (config1 >> 3) & 0x07;
+	tmp = SYSREG_BFEXT(DLSZ, config1);
 	if (tmp) {
-		boot_cpu_data.dcache.ways = 1 << (config1 & 0x07);
-		boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f);
+		boot_cpu_data.dcache.ways = 1 << SYSREG_BFEXT(DASS, config1);
+		boot_cpu_data.dcache.sets = 1 << SYSREG_BFEXT(DSET, config1);
 		boot_cpu_data.dcache.linesz = 1 << (tmp + 1);
 	}
 
@@ -250,16 +251,39 @@ void __init setup_processor(void)
 		cpu_names[cpu_id], cpu_id, cpu_rev,
 		arch_names[arch_id], arch_rev);
 	printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
+
 	printk ("CPU: features:");
-	if (config0 & (1 << 6))
-		printk(" fpu");
-	if (config0 & (1 << 5))
-		printk(" java");
-	if (config0 & (1 << 4))
-		printk(" perfctr");
-	if (config0 & (1 << 3))
+	features = 0;
+	if (config0 & SYSREG_BIT(CONFIG0_R)) {
+		features |= AVR32_FEATURE_RMW;
+		printk(" rmw");
+	}
+	if (config0 & SYSREG_BIT(CONFIG0_D)) {
+		features |= AVR32_FEATURE_DSP;
+		printk(" dsp");
+	}
+	if (config0 & SYSREG_BIT(CONFIG0_S)) {
+		features |= AVR32_FEATURE_SIMD;
+		printk(" simd");
+	}
+	if (config0 & SYSREG_BIT(CONFIG0_O)) {
+		features |= AVR32_FEATURE_OCD;
 		printk(" ocd");
+	}
+	if (config0 & SYSREG_BIT(CONFIG0_P)) {
+		features |= AVR32_FEATURE_PCTR;
+		printk(" perfctr");
+	}
+	if (config0 & SYSREG_BIT(CONFIG0_J)) {
+		features |= AVR32_FEATURE_JAVA;
+		printk(" java");
+	}
+	if (config0 & SYSREG_BIT(CONFIG0_F)) {
+		features |= AVR32_FEATURE_FPU;
+		printk(" fpu");
+	}
 	printk("\n");
+	boot_cpu_data.features = features;
 }
 
 #ifdef CONFIG_PROC_FS
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index eeb66792bc37..42657f1703b2 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -100,55 +100,49 @@ dtlb_miss_write:
 
 	.global	tlb_miss_common
 tlb_miss_common:
-	mfsr	r0, SYSREG_PTBR
-	mfsr	r1, SYSREG_TLBEAR
+	mfsr	r0, SYSREG_TLBEAR
+	mfsr	r1, SYSREG_PTBR
 
 	/* Is it the vmalloc space? */
-	bld	r1, 31
+	bld	r0, 31
 	brcs	handle_vmalloc_miss
 
 	/* First level lookup */
 pgtbl_lookup:
-	lsr	r2, r1, PGDIR_SHIFT
-	ld.w	r0, r0[r2 << 2]
-	bld	r0, _PAGE_BIT_PRESENT
+	lsr	r2, r0, PGDIR_SHIFT
+	ld.w	r3, r1[r2 << 2]
+	bfextu	r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
+	bld	r3, _PAGE_BIT_PRESENT
 	brcc	page_table_not_present
 
-	/* TODO: Check access rights on page table if necessary */
-
 	/* Translate to virtual address in P1. */
-	andl	r0, 0xf000
-	sbr	r0, 31
+	andl	r3, 0xf000
+	sbr	r3, 31
 
 	/* Second level lookup */
-	lsl	r1, (32 - PGDIR_SHIFT)
-	lsr	r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
-	add	r2, r0, r1 << 2
-	ld.w	r1, r2[0]
-	bld	r1, _PAGE_BIT_PRESENT
+	ld.w	r2, r3[r1 << 2]
+	mfsr	r0, SYSREG_TLBARLO
+	bld	r2, _PAGE_BIT_PRESENT
 	brcc	page_not_present
 
 	/* Mark the page as accessed */
-	sbr	r1, _PAGE_BIT_ACCESSED
-	st.w	r2[0], r1
+	sbr	r2, _PAGE_BIT_ACCESSED
+	st.w	r3[r1 << 2], r2
 
 	/* Drop software flags */
-	andl	r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
-	mtsr	SYSREG_TLBELO, r1
+	andl	r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
+	mtsr	SYSREG_TLBELO, r2
 
 	/* Figure out which entry we want to replace */
-	mfsr	r0, SYSREG_TLBARLO
+	mfsr	r1, SYSREG_MMUCR
 	clz	r2, r0
 	brcc	1f
-	mov	r1, -1			/* All entries have been accessed, */
-	mtsr	SYSREG_TLBARLO, r1	/* so reset TLBAR */
-	mov	r2, 0			/* and start at 0 */
-1:	mfsr	r1, SYSREG_MMUCR
-	lsl	r2, 14
-	andl	r1, 0x3fff, COH
-	or	r1, r2
-	mtsr	SYSREG_MMUCR, r1
+	mov	r3, -1			/* All entries have been accessed, */
+	mov	r2, 0			/* so start at 0 */
+	mtsr	SYSREG_TLBARLO, r3	/* and reset TLBAR */
 
+1:	bfins	r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
+	mtsr	SYSREG_MMUCR, r1
 	tlbw
 
 	tlbmiss_restore
@@ -156,8 +150,8 @@ pgtbl_lookup:
 
 handle_vmalloc_miss:
 	/* Simply do the lookup in init's page table */
-	mov	r0, lo(swapper_pg_dir)
-	orh	r0, hi(swapper_pg_dir)
+	mov	r1, lo(swapper_pg_dir)
+	orh	r1, hi(swapper_pg_dir)
 	rjmp	pgtbl_lookup
 
 
@@ -340,12 +334,34 @@ do_bus_error_read:
 do_nmi_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	/* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */
-	rcall	save_full_context_ex
+	mfsr	r9, SYSREG_RSR_NMI
+	mfsr	r8, SYSREG_RAR_NMI
+	bfextu	r0, r9, MODE_SHIFT, 3
+	brne	2f
+
+1:	pushm	r8, r9	/* PC and SR */
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
 	rcall	do_nmi
-	rjmp	bad_return
+	popm	r8-r9
+	mtsr	SYSREG_RAR_NMI, r8
+	tst	r0, r0
+	mtsr	SYSREG_RSR_NMI, r9
+	brne	3f
+
+	ldmts	sp++, r0-lr
+	sub	sp, -4		/* skip r12_orig */
+	rete
+
+2:	sub	r10, sp, -(FRAME_SIZE_FULL - REG_LR)
+	stdsp	sp[4], r10	/* replace saved SP */
+	rjmp	1b
+
+3:	popm	lr
+	sub	sp, -4		/* skip sp */
+	popm	r0-r12
+	sub	sp, -4		/* skip r12_orig */
+	rete
 
 handle_address_fault:
 	sub	sp, 4
@@ -630,9 +646,12 @@ irq_level\level:
 	rcall	do_IRQ
 
 	lddsp	r4, sp[REG_SR]
-	andh	r4, (MODE_MASK >> 16), COH
+	bfextu	r4, r4, SYSREG_M0_OFFSET, 3
+	cp.w	r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
+	breq	2f
+	cp.w	r4, MODE_USER >> SYSREG_M0_OFFSET
 #ifdef CONFIG_PREEMPT
-	brne	2f
+	brne	3f
 #else
 	brne	1f
 #endif
@@ -649,9 +668,18 @@ irq_level\level:
 	sub	sp, -4		/* ignore r12_orig */
 	rete
 
+2:	get_thread_info	r0
+	ld.w	r1, r0[TI_flags]
+	bld	r1, TIF_CPU_GOING_TO_SLEEP
 #ifdef CONFIG_PREEMPT
-2:
-	get_thread_info	r0
+	brcc	3f
+#else
+	brcc	1b
+#endif
+	sub	r1, pc, . - cpu_idle_skip_sleep
+	stdsp	sp[REG_PC], r1
+#ifdef CONFIG_PREEMPT
+3:	get_thread_info r0
 	ld.w	r2, r0[TI_preempt_count]
 	cp.w	r2, 0
 	brne	1b
@@ -662,12 +690,32 @@ irq_level\level:
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1b
 	rcall	preempt_schedule_irq
-	rjmp	1b
 #endif
+	rjmp	1b
 	.endm
 
 	.section .irq.text,"ax",@progbits
 
+.global cpu_idle_sleep
+cpu_idle_sleep:
+	mask_interrupts
+	get_thread_info r8
+	ld.w	r9, r8[TI_flags]
+	bld	r9, TIF_NEED_RESCHED
+	brcs	cpu_idle_enable_int_and_exit
+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+	unmask_interrupts
+	sleep 0
+cpu_idle_skip_sleep:
+	mask_interrupts
+	ld.w	r9, r8[TI_flags]
+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+cpu_idle_enable_int_and_exit:
+	unmask_interrupts
+	retal	r12
+
 	.global	irq_level0
 	.global	irq_level1
 	.global	irq_level2
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index b599eae64576..1167fe9cf6c4 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -12,10 +12,11 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/moduleloader.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <linux/bug.h>
 #include <linux/elf.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleloader.h>
 #include <linux/vmalloc.h>
 
 void *module_alloc(unsigned long size)
@@ -315,10 +316,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
 	vfree(module->arch.syminfo);
 	module->arch.syminfo = NULL;
 
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, module);
 }
 
 void module_arch_cleanup(struct module *module)
 {
-
+	module_bug_cleanup(module);
 }
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 0b4325946a41..4e4181ed1c6d 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -11,6 +11,7 @@
 #include <linux/fs.h>
 #include <linux/ptrace.h>
 #include <linux/reboot.h>
+#include <linux/uaccess.h>
 #include <linux/unistd.h>
 
 #include <asm/sysreg.h>
@@ -19,6 +20,8 @@
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
+extern void cpu_idle_sleep(void);
+
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -27,9 +30,8 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		/* TODO: Enter sleep mode */
 		while (!need_resched())
-			cpu_relax();
+			cpu_idle_sleep();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -114,39 +116,178 @@ void release_thread(struct task_struct *dead_task)
 	/* do nothing */
 }
 
+static void dump_mem(const char *str, const char *log_lvl,
+		     unsigned long bottom, unsigned long top)
+{
+	unsigned long p;
+	int i;
+
+	printk("%s%s(0x%08lx to 0x%08lx)\n", log_lvl, str, bottom, top);
+
+	for (p = bottom & ~31; p < top; ) {
+		printk("%s%04lx: ", log_lvl, p & 0xffff);
+
+		for (i = 0; i < 8; i++, p += 4) {
+			unsigned int val;
+
+			if (p < bottom || p >= top)
+				printk("         ");
+			else {
+				if (__get_user(val, (unsigned int __user *)p)) {
+					printk("\n");
+					goto out;
+				}
+				printk("%08x ", val);
+			}
+		}
+		printk("\n");
+	}
+
+out:
+	return;
+}
+
+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
+{
+	return (p > (unsigned long)tinfo)
+		&& (p < (unsigned long)tinfo + THREAD_SIZE - 3);
+}
+
+#ifdef CONFIG_FRAME_POINTER
+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
+			       struct pt_regs *regs, const char *log_lvl)
+{
+	unsigned long lr, fp;
+	struct thread_info *tinfo;
+
+	if (regs)
+		fp = regs->r7;
+	else if (tsk == current)
+		asm("mov %0, r7" : "=r"(fp));
+	else
+		fp = tsk->thread.cpu_context.r7;
+
+	/*
+	 * Walk the stack as long as the frame pointer (a) is within
+	 * the kernel stack of the task, and (b) it doesn't move
+	 * downwards.
+	 */
+	tinfo = task_thread_info(tsk);
+	printk("%sCall trace:\n", log_lvl);
+	while (valid_stack_ptr(tinfo, fp)) {
+		unsigned long new_fp;
+
+		lr = *(unsigned long *)fp;
+#ifdef CONFIG_KALLSYMS
+		printk("%s [<%08lx>] ", log_lvl, lr);
+#else
+		printk(" [<%08lx>] ", lr);
+#endif
+		print_symbol("%s\n", lr);
+
+		new_fp = *(unsigned long *)(fp + 4);
+		if (new_fp <= fp)
+			break;
+		fp = new_fp;
+	}
+	printk("\n");
+}
+#else
+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
+			       struct pt_regs *regs, const char *log_lvl)
+{
+	unsigned long addr;
+
+	printk("%sCall trace:\n", log_lvl);
+
+	while (!kstack_end(sp)) {
+		addr = *sp++;
+		if (kernel_text_address(addr)) {
+#ifdef CONFIG_KALLSYMS
+			printk("%s [<%08lx>] ", log_lvl, addr);
+#else
+			printk(" [<%08lx>] ", addr);
+#endif
+			print_symbol("%s\n", addr);
+		}
+	}
+	printk("\n");
+}
+#endif
+
+void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
+			struct pt_regs *regs, const char *log_lvl)
+{
+	struct thread_info *tinfo;
+
+	if (sp == 0) {
+		if (tsk)
+			sp = tsk->thread.cpu_context.ksp;
+		else
+			sp = (unsigned long)&tinfo;
+	}
+	if (!tsk)
+		tsk = current;
+
+	tinfo = task_thread_info(tsk);
+
+	if (valid_stack_ptr(tinfo, sp)) {
+		dump_mem("Stack: ", log_lvl, sp,
+			 THREAD_SIZE + (unsigned long)tinfo);
+		show_trace_log_lvl(tsk, (unsigned long *)sp, regs, log_lvl);
+	}
+}
+
+void show_stack(struct task_struct *tsk, unsigned long *stack)
+{
+	show_stack_log_lvl(tsk, (unsigned long)stack, NULL, "");
+}
+
+void dump_stack(void)
+{
+	unsigned long stack;
+
+	show_trace_log_lvl(current, &stack, NULL, "");
+}
+EXPORT_SYMBOL(dump_stack);
+
 static const char *cpu_modes[] = {
 	"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
 	"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
 };
 
-void show_regs(struct pt_regs *regs)
+void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl)
 {
 	unsigned long sp = regs->sp;
 	unsigned long lr = regs->lr;
 	unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT;
 
-	if (!user_mode(regs))
+	if (!user_mode(regs)) {
 		sp = (unsigned long)regs + FRAME_SIZE_FULL;
 
-	print_symbol("PC is at %s\n", instruction_pointer(regs));
-	print_symbol("LR is at %s\n", lr);
-	printk("pc : [<%08lx>]    lr : [<%08lx>]    %s\n"
-	       "sp : %08lx  r12: %08lx  r11: %08lx\n",
-	       instruction_pointer(regs),
-	       lr, print_tainted(), sp, regs->r12, regs->r11);
-	printk("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
-	       regs->r10, regs->r9, regs->r8);
-	printk("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-	       regs->r7, regs->r6, regs->r5, regs->r4);
-	printk("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-	       regs->r3, regs->r2, regs->r1, regs->r0);
-	printk("Flags: %c%c%c%c%c\n",
+		printk("%s", log_lvl);
+		print_symbol("PC is at %s\n", instruction_pointer(regs));
+		printk("%s", log_lvl);
+		print_symbol("LR is at %s\n", lr);
+	}
+
+	printk("%spc : [<%08lx>]    lr : [<%08lx>]    %s\n"
+	       "%ssp : %08lx  r12: %08lx  r11: %08lx\n",
+	       log_lvl, instruction_pointer(regs), lr, print_tainted(),
+	       log_lvl, sp, regs->r12, regs->r11);
+	printk("%sr10: %08lx  r9 : %08lx  r8 : %08lx\n",
+	       log_lvl, regs->r10, regs->r9, regs->r8);
+	printk("%sr7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
+	       log_lvl, regs->r7, regs->r6, regs->r5, regs->r4);
+	printk("%sr3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
+	       log_lvl, regs->r3, regs->r2, regs->r1, regs->r0);
+	printk("%sFlags: %c%c%c%c%c\n", log_lvl,
 	       regs->sr & SR_Q ? 'Q' : 'q',
 	       regs->sr & SR_V ? 'V' : 'v',
 	       regs->sr & SR_N ? 'N' : 'n',
 	       regs->sr & SR_Z ? 'Z' : 'z',
 	       regs->sr & SR_C ? 'C' : 'c');
-	printk("Mode bits: %c%c%c%c%c%c%c%c%c\n",
+	printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
 	       regs->sr & SR_H ? 'H' : 'h',
 	       regs->sr & SR_R ? 'R' : 'r',
 	       regs->sr & SR_J ? 'J' : 'j',
@@ -156,9 +297,21 @@ void show_regs(struct pt_regs *regs)
 	       regs->sr & SR_I1M ? '1' : '.',
 	       regs->sr & SR_I0M ? '0' : '.',
 	       regs->sr & SR_GM ? 'G' : 'g');
-	printk("CPU Mode: %s\n", cpu_modes[mode]);
+	printk("%sCPU Mode: %s\n", log_lvl, cpu_modes[mode]);
+	printk("%sProcess: %s [%d] (task: %p thread: %p)\n",
+	       log_lvl, current->comm, current->pid, current,
+	       task_thread_info(current));
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	unsigned long sp = regs->sp;
+
+	if (!user_mode(regs))
+		sp = (unsigned long)regs + FRAME_SIZE_FULL;
 
-	show_trace(NULL, (unsigned long *)sp, regs);
+	show_regs_log_lvl(regs, "");
+	show_trace_log_lvl(current, (unsigned long *)sp, regs, "");
 }
 EXPORT_SYMBOL(show_regs);
 
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index f2e81cd79002..6f4388f7c20b 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -313,7 +313,7 @@ asmlinkage void do_debug_priv(struct pt_regs *regs)
 		__mtdr(DBGREG_DC, dc);
 
 		ti = current_thread_info();
-		ti->flags |= _TIF_BREAKPOINT;
+		set_ti_thread_flag(ti, TIF_BREAKPOINT);
 
 		/* The TLB miss handlers don't check thread flags */
 		if ((regs->pc >= (unsigned long)&itlb_miss)
@@ -328,7 +328,7 @@ asmlinkage void do_debug_priv(struct pt_regs *regs)
 		 * single step.
 		 */
 		if ((regs->sr & MODE_MASK) != MODE_SUPERVISOR)
-			ti->flags |= TIF_SINGLE_STEP;
+			set_ti_thread_flag(ti, TIF_SINGLE_STEP);
 	} else {
 		panic("Unable to handle debug trap at pc = %08lx\n",
 		      regs->pc);
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index a1a7c3c3f522..b279d66acf5f 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -8,12 +8,14 @@
 
 #include <linux/clk.h>
 #include <linux/init.h>
+#include <linux/initrd.h>
 #include <linux/sched.h>
 #include <linux/console.h>
 #include <linux/ioport.h>
 #include <linux/bootmem.h>
 #include <linux/fs.h>
 #include <linux/module.h>
+#include <linux/pfn.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/kernel.h>
@@ -30,13 +32,6 @@
 extern int root_mountflags;
 
 /*
- * Bootloader-provided information about physical memory
- */
-struct tag_mem_range *mem_phys;
-struct tag_mem_range *mem_reserved;
-struct tag_mem_range *mem_ramdisk;
-
-/*
  * Initialize loops_per_jiffy as 5000000 (500MIPS).
  * Better make it too large than too small...
  */
@@ -48,48 +43,193 @@ EXPORT_SYMBOL(boot_cpu_data);
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
 /*
- * Should be more than enough, but if you have a _really_ complex
- * setup, you might need to increase the size of this...
+ * Standard memory resources
  */
-static struct tag_mem_range __initdata mem_range_cache[32];
-static unsigned mem_range_next_free;
+static struct resource __initdata kernel_data = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_MEM,
+};
+static struct resource __initdata kernel_code = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_MEM,
+	.sibling = &kernel_data,
+};
 
 /*
- * Standard memory resources
+ * Available system RAM and reserved regions as singly linked
+ * lists. These lists are traversed using the sibling pointer in
+ * struct resource and are kept sorted at all times.
  */
-static struct resource mem_res[] = {
-	{
-		.name	= "Kernel code",
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_MEM
-	},
-	{
-		.name	= "Kernel data",
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_MEM,
-	},
-};
+static struct resource *__initdata system_ram;
+static struct resource *__initdata reserved = &kernel_code;
+
+/*
+ * We need to allocate these before the bootmem allocator is up and
+ * running, so we need this "cache". 32 entries are probably enough
+ * for all but the most insanely complex systems.
+ */
+static struct resource __initdata res_cache[32];
+static unsigned int __initdata res_cache_next_free;
+
+static void __init resource_init(void)
+{
+	struct resource *mem, *res;
+	struct resource *new;
+
+	kernel_code.start = __pa(init_mm.start_code);
+
+	for (mem = system_ram; mem; mem = mem->sibling) {
+		new = alloc_bootmem_low(sizeof(struct resource));
+		memcpy(new, mem, sizeof(struct resource));
+
+		new->sibling = NULL;
+		if (request_resource(&iomem_resource, new))
+			printk(KERN_WARNING "Bad RAM resource %08x-%08x\n",
+			       mem->start, mem->end);
+	}
+
+	for (res = reserved; res; res = res->sibling) {
+		new = alloc_bootmem_low(sizeof(struct resource));
+		memcpy(new, res, sizeof(struct resource));
+
+		new->sibling = NULL;
+		if (insert_resource(&iomem_resource, new))
+			printk(KERN_WARNING
+			       "Bad reserved resource %s (%08x-%08x)\n",
+			       res->name, res->start, res->end);
+	}
+}
+
+static void __init
+add_physical_memory(resource_size_t start, resource_size_t end)
+{
+	struct resource *new, *next, **pprev;
+
+	for (pprev = &system_ram, next = system_ram; next;
+	     pprev = &next->sibling, next = next->sibling) {
+		if (end < next->start)
+			break;
+		if (start <= next->end) {
+			printk(KERN_WARNING
+			       "Warning: Physical memory map is broken\n");
+			printk(KERN_WARNING
+			       "Warning: %08x-%08x overlaps %08x-%08x\n",
+			       start, end, next->start, next->end);
+			return;
+		}
+	}
+
+	if (res_cache_next_free >= ARRAY_SIZE(res_cache)) {
+		printk(KERN_WARNING
+		       "Warning: Failed to add physical memory %08x-%08x\n",
+		       start, end);
+		return;
+	}
+
+	new = &res_cache[res_cache_next_free++];
+	new->start = start;
+	new->end = end;
+	new->name = "System RAM";
+	new->flags = IORESOURCE_MEM;
+
+	*pprev = new;
+}
+
+static int __init
+add_reserved_region(resource_size_t start, resource_size_t end,
+		    const char *name)
+{
+	struct resource *new, *next, **pprev;
+
+	if (end < start)
+		return -EINVAL;
+
+	if (res_cache_next_free >= ARRAY_SIZE(res_cache))
+		return -ENOMEM;
+
+	for (pprev = &reserved, next = reserved; next;
+	     pprev = &next->sibling, next = next->sibling) {
+		if (end < next->start)
+			break;
+		if (start <= next->end)
+			return -EBUSY;
+	}
+
+	new = &res_cache[res_cache_next_free++];
+	new->start = start;
+	new->end = end;
+	new->name = name;
+	new->flags = IORESOURCE_MEM;
+
+	*pprev = new;
+
+	return 0;
+}
+
+static unsigned long __init
+find_free_region(const struct resource *mem, resource_size_t size,
+		 resource_size_t align)
+{
+	struct resource *res;
+	unsigned long target;
+
+	target = ALIGN(mem->start, align);
+	for (res = reserved; res; res = res->sibling) {
+		if ((target + size) <= res->start)
+			break;
+		if (target <= res->end)
+			target = ALIGN(res->end + 1, align);
+	}
+
+	if ((target + size) > (mem->end + 1))
+		return mem->end + 1;
+
+	return target;
+}
+
+static int __init
+alloc_reserved_region(resource_size_t *start, resource_size_t size,
+		      resource_size_t align, const char *name)
+{
+	struct resource *mem;
+	resource_size_t target;
+	int ret;
+
+	for (mem = system_ram; mem; mem = mem->sibling) {
+		target = find_free_region(mem, size, align);
+		if (target <= mem->end) {
+			ret = add_reserved_region(target, target + size - 1,
+						  name);
+			if (!ret)
+				*start = target;
+			return ret;
+		}
+	}
 
-#define kernel_code	mem_res[0]
-#define kernel_data	mem_res[1]
+	return -ENOMEM;
+}
 
 /*
  * Early framebuffer allocation. Works as follows:
  *   - If fbmem_size is zero, nothing will be allocated or reserved.
  *   - If fbmem_start is zero when setup_bootmem() is called,
- *     fbmem_size bytes will be allocated from the bootmem allocator.
+ *     a block of fbmem_size bytes will be reserved before bootmem
+ *     initialization. It will be aligned to the largest page size
+ *     that fbmem_size is a multiple of.
  *   - If fbmem_start is nonzero, an area of size fbmem_size will be
- *     reserved at the physical address fbmem_start if necessary. If
- *     the area isn't in a memory region known to the kernel, it will
- *     be left alone.
+ *     reserved at the physical address fbmem_start if possible. If
+ *     it collides with other reserved memory, a different block of
+ *     same size will be allocated, just as if fbmem_start was zero.
  *
  * Board-specific code may use these variables to set up platform data
  * for the framebuffer driver if fbmem_size is nonzero.
  */
-static unsigned long __initdata fbmem_start;
-static unsigned long __initdata fbmem_size;
+resource_size_t __initdata fbmem_start;
+resource_size_t __initdata fbmem_size;
 
 /*
  * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
@@ -103,48 +243,42 @@ static unsigned long __initdata fbmem_size;
  */
 static int __init early_parse_fbmem(char *p)
 {
+	int ret;
+	unsigned long align;
+
 	fbmem_size = memparse(p, &p);
-	if (*p == '@')
+	if (*p == '@') {
 		fbmem_start = memparse(p, &p);
-	return 0;
-}
-early_param("fbmem", early_parse_fbmem);
-
-static inline void __init resource_init(void)
-{
-	struct tag_mem_range *region;
-
-	kernel_code.start = __pa(init_mm.start_code);
-	kernel_code.end = __pa(init_mm.end_code - 1);
-	kernel_data.start = __pa(init_mm.end_code);
-	kernel_data.end = __pa(init_mm.brk - 1);
-
-	for (region = mem_phys; region; region = region->next) {
-		struct resource *res;
-		unsigned long phys_start, phys_end;
-
-		if (region->size == 0)
-			continue;
-
-		phys_start = region->addr;
-		phys_end = phys_start + region->size - 1;
-
-		res = alloc_bootmem_low(sizeof(*res));
-		res->name = "System RAM";
-		res->start = phys_start;
-		res->end = phys_end;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-
-		request_resource (&iomem_resource, res);
+		ret = add_reserved_region(fbmem_start,
+					  fbmem_start + fbmem_size - 1,
+					  "Framebuffer");
+		if (ret) {
+			printk(KERN_WARNING
+			       "Failed to reserve framebuffer memory\n");
+			fbmem_start = 0;
+		}
+	}
 
-		if (kernel_code.start >= res->start &&
-		    kernel_code.end <= res->end)
-			request_resource (res, &kernel_code);
-		if (kernel_data.start >= res->start &&
-		    kernel_data.end <= res->end)
-			request_resource (res, &kernel_data);
+	if (!fbmem_start) {
+		if ((fbmem_size & 0x000fffffUL) == 0)
+			align = 0x100000;	/* 1 MiB */
+		else if ((fbmem_size & 0x0000ffffUL) == 0)
+			align = 0x10000;	/* 64 KiB */
+		else
+			align = 0x1000;		/* 4 KiB */
+
+		ret = alloc_reserved_region(&fbmem_start, fbmem_size,
+					    align, "Framebuffer");
+		if (ret) {
+			printk(KERN_WARNING
+			       "Failed to allocate framebuffer memory\n");
+			fbmem_size = 0;
+		}
 	}
+
+	return 0;
 }
+early_param("fbmem", early_parse_fbmem);
 
 static int __init parse_tag_core(struct tag *tag)
 {
@@ -157,11 +291,9 @@ static int __init parse_tag_core(struct tag *tag)
 }
 __tagtable(ATAG_CORE, parse_tag_core);
 
-static int __init parse_tag_mem_range(struct tag *tag,
-				      struct tag_mem_range **root)
+static int __init parse_tag_mem(struct tag *tag)
 {
-	struct tag_mem_range *cur, **pprev;
-	struct tag_mem_range *new;
+	unsigned long start, end;
 
 	/*
 	 * Ignore zero-sized entries. If we're running standalone, the
@@ -171,34 +303,53 @@ static int __init parse_tag_mem_range(struct tag *tag,
 	if (tag->u.mem_range.size == 0)
 		return 0;
 
-	/*
-	 * Copy the data so the bootmem init code doesn't need to care
-	 * about it.
-	 */
-	if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
-		panic("Physical memory map too complex!\n");
+	start = tag->u.mem_range.addr;
+	end = tag->u.mem_range.addr + tag->u.mem_range.size - 1;
+
+	add_physical_memory(start, end);
+	return 0;
+}
+__tagtable(ATAG_MEM, parse_tag_mem);
+
+static int __init parse_tag_rdimg(struct tag *tag)
+{
+#ifdef CONFIG_INITRD
+	struct tag_mem_range *mem = &tag->u.mem_range;
+	int ret;
 
-	new = &mem_range_cache[mem_range_next_free++];
-	*new = tag->u.mem_range;
+	if (initrd_start) {
+		printk(KERN_WARNING
+		       "Warning: Only the first initrd image will be used\n");
+		return 0;
+	}
 
-	pprev = root;
-	cur = *root;
-	while (cur) {
-		pprev = &cur->next;
-		cur = cur->next;
+	ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
+				  "initrd");
+	if (ret) {
+		printk(KERN_WARNING
+		       "Warning: Failed to reserve initrd memory\n");
+		return ret;
 	}
 
-	*pprev = new;
-	new->next = NULL;
+	initrd_start = (unsigned long)__va(mem->addr);
+	initrd_end = initrd_start + mem->size;
+#else
+	printk(KERN_WARNING "RAM disk image present, but "
+	       "no initrd support in kernel, ignoring\n");
+#endif
 
 	return 0;
 }
+__tagtable(ATAG_RDIMG, parse_tag_rdimg);
 
-static int __init parse_tag_mem(struct tag *tag)
+static int __init parse_tag_rsvd_mem(struct tag *tag)
 {
-	return parse_tag_mem_range(tag, &mem_phys);
+	struct tag_mem_range *mem = &tag->u.mem_range;
+
+	return add_reserved_region(mem->addr, mem->addr + mem->size - 1,
+				   "Reserved");
 }
-__tagtable(ATAG_MEM, parse_tag_mem);
+__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
 
 static int __init parse_tag_cmdline(struct tag *tag)
 {
@@ -207,12 +358,6 @@ static int __init parse_tag_cmdline(struct tag *tag)
 }
 __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
 
-static int __init parse_tag_rdimg(struct tag *tag)
-{
-	return parse_tag_mem_range(tag, &mem_ramdisk);
-}
-__tagtable(ATAG_RDIMG, parse_tag_rdimg);
-
 static int __init parse_tag_clock(struct tag *tag)
 {
 	/*
@@ -223,12 +368,6 @@ static int __init parse_tag_clock(struct tag *tag)
 }
 __tagtable(ATAG_CLOCK, parse_tag_clock);
 
-static int __init parse_tag_rsvd_mem(struct tag *tag)
-{
-	return parse_tag_mem_range(tag, &mem_reserved);
-}
-__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
-
 /*
  * Scan the tag table for this tag, and call its parse function. The
  * tag table is built by the linker from all the __tagtable
@@ -260,10 +399,137 @@ static void __init parse_tags(struct tag *t)
 			       t->hdr.tag);
 }
 
+/*
+ * Find a free memory region large enough for storing the
+ * bootmem bitmap.
+ */
+static unsigned long __init
+find_bootmap_pfn(const struct resource *mem)
+{
+	unsigned long bootmap_pages, bootmap_len;
+	unsigned long node_pages = PFN_UP(mem->end - mem->start + 1);
+	unsigned long bootmap_start;
+
+	bootmap_pages = bootmem_bootmap_pages(node_pages);
+	bootmap_len = bootmap_pages << PAGE_SHIFT;
+
+	/*
+	 * Find a large enough region without reserved pages for
+	 * storing the bootmem bitmap. We can take advantage of the
+	 * fact that all lists have been sorted.
+	 *
+	 * We have to check that we don't collide with any reserved
+	 * regions, which includes the kernel image and any RAMDISK
+	 * images.
+	 */
+	bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE);
+
+	return bootmap_start >> PAGE_SHIFT;
+}
+
+#define MAX_LOWMEM	HIGHMEM_START
+#define MAX_LOWMEM_PFN	PFN_DOWN(MAX_LOWMEM)
+
+static void __init setup_bootmem(void)
+{
+	unsigned bootmap_size;
+	unsigned long first_pfn, bootmap_pfn, pages;
+	unsigned long max_pfn, max_low_pfn;
+	unsigned node = 0;
+	struct resource *res;
+
+	printk(KERN_INFO "Physical memory:\n");
+	for (res = system_ram; res; res = res->sibling)
+		printk("  %08x-%08x\n", res->start, res->end);
+	printk(KERN_INFO "Reserved memory:\n");
+	for (res = reserved; res; res = res->sibling)
+		printk("  %08x-%08x: %s\n",
+		       res->start, res->end, res->name);
+
+	nodes_clear(node_online_map);
+
+	if (system_ram->sibling)
+		printk(KERN_WARNING "Only using first memory bank\n");
+
+	for (res = system_ram; res; res = NULL) {
+		first_pfn = PFN_UP(res->start);
+		max_low_pfn = max_pfn = PFN_DOWN(res->end + 1);
+		bootmap_pfn = find_bootmap_pfn(res);
+		if (bootmap_pfn > max_pfn)
+			panic("No space for bootmem bitmap!\n");
+
+		if (max_low_pfn > MAX_LOWMEM_PFN) {
+			max_low_pfn = MAX_LOWMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+			/*
+			 * Lowmem is memory that can be addressed
+			 * directly through P1/P2
+			 */
+			printk(KERN_WARNING
+			       "Node %u: Only %ld MiB of memory will be used.\n",
+			       node, MAX_LOWMEM >> 20);
+			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+#else
+#error HIGHMEM is not supported by AVR32 yet
+#endif
+		}
+
+		/* Initialize the boot-time allocator with low memory only. */
+		bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
+						 first_pfn, max_low_pfn);
+
+		/*
+		 * Register fully available RAM pages with the bootmem
+		 * allocator.
+		 */
+		pages = max_low_pfn - first_pfn;
+		free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
+				   PFN_PHYS(pages));
+
+		/* Reserve space for the bootmem bitmap... */
+		reserve_bootmem_node(NODE_DATA(node),
+				     PFN_PHYS(bootmap_pfn),
+				     bootmap_size);
+
+		/* ...and any other reserved regions. */
+		for (res = reserved; res; res = res->sibling) {
+			if (res->start > PFN_PHYS(max_pfn))
+				break;
+
+			/*
+			 * resource_init will complain about partial
+			 * overlaps, so we'll just ignore such
+			 * resources for now.
+			 */
+			if (res->start >= PFN_PHYS(first_pfn)
+			    && res->end < PFN_PHYS(max_pfn))
+				reserve_bootmem_node(
+					NODE_DATA(node), res->start,
+					res->end - res->start + 1);
+		}
+
+		node_set_online(node);
+	}
+}
+
 void __init setup_arch (char **cmdline_p)
 {
 	struct clk *cpu_clk;
 
+	init_mm.start_code = (unsigned long)_text;
+	init_mm.end_code = (unsigned long)_etext;
+	init_mm.end_data = (unsigned long)_edata;
+	init_mm.brk = (unsigned long)_end;
+
+	/*
+	 * Include .init section to make allocations easier. It will
+	 * be removed before the resource is actually requested.
+	 */
+	kernel_code.start = __pa(__init_begin);
+	kernel_code.end = __pa(init_mm.end_code - 1);
+	kernel_data.start = __pa(init_mm.end_code);
+	kernel_data.end = __pa(init_mm.brk - 1);
+
 	parse_tags(bootloader_tags);
 
 	setup_processor();
@@ -289,24 +555,16 @@ void __init setup_arch (char **cmdline_p)
 		       ((cpu_hz + 500) / 1000) % 1000);
 	}
 
-	init_mm.start_code = (unsigned long) &_text;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_end;
-
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 	parse_early_param();
 
 	setup_bootmem();
 
-	board_setup_fbmem(fbmem_start, fbmem_size);
-
 #ifdef CONFIG_VT
 	conswitchp = &dummy_con;
 #endif
 
 	paging_init();
-
 	resource_init();
 }
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index c10833f2ee0c..7014a3571ec0 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2004-2006 Atmel Corporation
+ * Copyright (C) 2004-2007 Atmel Corporation
  *
  * Based on MIPS implementation arch/mips/kernel/time.c
  *   Copyright 2001 MontaVista Software Inc.
@@ -20,18 +20,25 @@
 #include <linux/init.h>
 #include <linux/profile.h>
 #include <linux/sysdev.h>
+#include <linux/err.h>
 
 #include <asm/div64.h>
 #include <asm/sysreg.h>
 #include <asm/io.h>
 #include <asm/sections.h>
 
-static cycle_t read_cycle_count(void)
+/* how many counter cycles in a jiffy? */
+static u32 cycles_per_jiffy;
+
+/* the count value for the next timer interrupt */
+static u32 expirelo;
+
+cycle_t __weak read_cycle_count(void)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
 
-static struct clocksource clocksource_avr32 = {
+struct clocksource __weak clocksource_avr32 = {
 	.name		= "avr32",
 	.rating		= 350,
 	.read		= read_cycle_count,
@@ -40,12 +47,20 @@ static struct clocksource clocksource_avr32 = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
+
+struct irqaction timer_irqaction = {
+	.handler	= timer_interrupt,
+	.flags		= IRQF_DISABLED,
+	.name		= "timer",
+};
+
 /*
  * By default we provide the null RTC ops
  */
 static unsigned long null_rtc_get_time(void)
 {
-	return mktime(2004, 1, 1, 0, 0, 0);
+	return mktime(2007, 1, 1, 0, 0, 0);
 }
 
 static int null_rtc_set_time(unsigned long sec)
@@ -56,23 +71,14 @@ static int null_rtc_set_time(unsigned long sec)
 static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
 static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
 
-/* how many counter cycles in a jiffy? */
-static unsigned long cycles_per_jiffy;
-
-/* cycle counter value at the previous timer interrupt */
-static unsigned int timerhi, timerlo;
-
-/* the count value for the next timer interrupt */
-static unsigned int expirelo;
-
 static void avr32_timer_ack(void)
 {
-	unsigned int count;
+	u32 count;
 
 	/* Ack this timer interrupt and set the next one */
 	expirelo += cycles_per_jiffy;
+	/* setting COMPARE to 0 stops the COUNT-COMPARE */
 	if (expirelo == 0) {
-		printk(KERN_DEBUG "expirelo == 0\n");
 		sysreg_write(COMPARE, expirelo + 1);
 	} else {
 		sysreg_write(COMPARE, expirelo);
@@ -86,27 +92,56 @@ static void avr32_timer_ack(void)
 	}
 }
 
-static unsigned int avr32_hpt_read(void)
+int __weak avr32_hpt_init(void)
 {
-	return sysreg_read(COUNT);
+	int ret;
+	unsigned long mult, shift, count_hz;
+
+	count_hz = clk_get_rate(boot_cpu_data.clk);
+	shift = clocksource_avr32.shift;
+	mult = clocksource_hz2mult(count_hz, shift);
+	clocksource_avr32.mult = mult;
+
+	{
+		u64 tmp;
+
+		tmp = TICK_NSEC;
+		tmp <<= shift;
+		tmp += mult / 2;
+		do_div(tmp, mult);
+
+		cycles_per_jiffy = tmp;
+	}
+
+	ret = setup_irq(0, &timer_irqaction);
+	if (ret) {
+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
+			"%lu.%03lu MHz\n",
+			((count_hz + 500) / 1000) / 1000,
+			((count_hz + 500) / 1000) % 1000);
+
+	return 0;
 }
 
 /*
  * Taken from MIPS c0_hpt_timer_init().
  *
- * Why is it so complicated, and what is "count"?  My assumption is
- * that `count' specifies the "reference cycle", i.e. the cycle since
- * reset that should mean "zero". The reason COUNT is written twice is
- * probably to make sure we don't get any timer interrupts while we
- * are messing with the counter.
+ * The reason COUNT is written twice is probably to make sure we don't get any
+ * timer interrupts while we are messing with the counter.
  */
-static void avr32_hpt_init(unsigned int count)
+int __weak avr32_hpt_start(void)
 {
-	count = sysreg_read(COUNT) - count;
+	u32 count = sysreg_read(COUNT);
 	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
 	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
 	sysreg_write(COMPARE, expirelo);
 	sysreg_write(COUNT, count);
+
+	return 0;
 }
 
 /*
@@ -115,26 +150,18 @@ static void avr32_hpt_init(unsigned int count)
  *
  * In UP mode, it is invoked from the (global) timer_interrupt.
  */
-static void local_timer_interrupt(int irq, void *dev_id)
+void local_timer_interrupt(int irq, void *dev_id)
 {
 	if (current->pid)
 		profile_tick(CPU_PROFILING);
 	update_process_times(user_mode(get_irq_regs()));
 }
 
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
+irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
 {
-	unsigned int count;
-
 	/* ack timer interrupt and try to set next interrupt */
-	count = avr32_hpt_read();
 	avr32_timer_ack();
 
-	/* Update timerhi/timerlo for intra-jiffy calibration */
-	timerhi += count < timerlo;	/* Wrap around */
-	timerlo = count;
-
 	/*
 	 * Call the generic timer interrupt handler
 	 */
@@ -153,60 +180,37 @@ timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "timer",
-};
-
 void __init time_init(void)
 {
-	unsigned long mult, shift, count_hz;
 	int ret;
 
+	/*
+	 * Make sure we don't get any COMPARE interrupts before we can
+	 * handle them.
+	 */
+	sysreg_write(COMPARE, 0);
+
 	xtime.tv_sec = rtc_get_time();
 	xtime.tv_nsec = 0;
 
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
-	printk("Before time_init: count=%08lx, compare=%08lx\n",
-	       (unsigned long)sysreg_read(COUNT),
-	       (unsigned long)sysreg_read(COMPARE));
-
-	count_hz = clk_get_rate(boot_cpu_data.clk);
-	shift = clocksource_avr32.shift;
-	mult = clocksource_hz2mult(count_hz, shift);
-	clocksource_avr32.mult = mult;
-
-	printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift);
-
-	{
-		u64 tmp;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
+	ret = avr32_hpt_init();
+	if (ret) {
+		pr_debug("timer: failed setup: %d\n", ret);
+		return;
 	}
 
-	/* This sets up the high precision timer for the first interrupt. */
-	avr32_hpt_init(avr32_hpt_read());
-
-	printk("After time_init: count=%08lx, compare=%08lx\n",
-	       (unsigned long)sysreg_read(COUNT),
-	       (unsigned long)sysreg_read(COMPARE));
-
 	ret = clocksource_register(&clocksource_avr32);
 	if (ret)
-		printk(KERN_ERR
-		       "timer: could not register clocksource: %d\n", ret);
+		pr_debug("timer: could not register clocksource: %d\n", ret);
 
-	ret = setup_irq(0, &timer_irqaction);
-	if (ret)
-		printk("timer: could not request IRQ 0: %d\n", ret);
+	ret = avr32_hpt_start();
+	if (ret) {
+		pr_debug("timer: failed starting: %d\n", ret);
+		return;
+	}
 }
 
 static struct sysdev_class timer_class = {
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 7e803f4d7a12..4f0382d8483f 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -5,152 +5,25 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#undef DEBUG
-#include <linux/sched.h>
+
+#include <linux/bug.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/kallsyms.h>
+#include <linux/module.h>
 #include <linux/notifier.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
 
-#include <asm/traps.h>
-#include <asm/sysreg.h>
 #include <asm/addrspace.h>
-#include <asm/ocd.h>
 #include <asm/mmu_context.h>
-#include <asm/uaccess.h>
-
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
-{
-	unsigned long p;
-	int i;
-
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
-
-	for (p = bottom & ~31; p < top; ) {
-		printk("%04lx: ", p & 0xffff);
-
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
-
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				if (__get_user(val, (unsigned int __user *)p)) {
-					printk("\n");
-					goto out;
-				}
-				printk("%08x ", val);
-			}
-		}
-		printk("\n");
-	}
-
-out:
-	return;
-}
-
-#ifdef CONFIG_FRAME_POINTER
-static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
-				struct pt_regs *regs)
-{
-	unsigned long __user *fp;
-	unsigned long __user *last_fp = NULL;
-
-	if (regs) {
-		fp = (unsigned long __user *)regs->r7;
-	} else if (tsk == current) {
-		register unsigned long __user *real_fp __asm__("r7");
-		fp = real_fp;
-	} else {
-		fp = (unsigned long __user *)tsk->thread.cpu_context.r7;
-	}
-
-	/*
-	 * Walk the stack until (a) we get an exception, (b) the frame
-	 * pointer becomes zero, or (c) the frame pointer gets stuck
-	 * at the same value.
-	 */
-	while (fp && fp != last_fp) {
-		unsigned long lr, new_fp = 0;
-
-		last_fp = fp;
-		if (__get_user(lr, fp))
-			break;
-		if (fp && __get_user(new_fp, fp + 1))
-			break;
-		fp = (unsigned long __user *)new_fp;
-
-		printk(" [<%08lx>] ", lr);
-		print_symbol("%s\n", lr);
-	}
-	printk("\n");
-}
-#else
-static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
-				struct pt_regs *regs)
-{
-	unsigned long addr;
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (kernel_text_address(addr)) {
-			printk(" [<%08lx>] ", addr);
-			print_symbol("%s\n", addr);
-		}
-	}
-}
-#endif
-
-void show_trace(struct task_struct *tsk, unsigned long *sp,
-		       struct pt_regs *regs)
-{
-	if (regs &&
-	    (((regs->sr & MODE_MASK) == MODE_EXCEPTION) ||
-	     ((regs->sr & MODE_MASK) == MODE_USER)))
-		return;
-
-	printk ("Call trace:");
-#ifdef CONFIG_KALLSYMS
-	printk("\n");
-#endif
-
-	__show_trace(tsk, sp, regs);
-	printk("\n");
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp)
-{
-	unsigned long stack;
-
-	if (!tsk)
-		tsk = current;
-	if (sp == 0) {
-		if (tsk == current) {
-			register unsigned long *real_sp __asm__("sp");
-			sp = real_sp;
-		} else {
-			sp = (unsigned long *)tsk->thread.cpu_context.ksp;
-		}
-	}
-
-	stack = (unsigned long)sp;
-	dump_mem("Stack: ", stack,
-		 THREAD_SIZE + (unsigned long)tsk->thread_info);
-	show_trace(tsk, sp, NULL);
-}
-
-void dump_stack(void)
-{
-	show_stack(NULL, NULL);
-}
-EXPORT_SYMBOL(dump_stack);
+#include <asm/ocd.h>
+#include <asm/sysreg.h>
+#include <asm/traps.h>
 
 ATOMIC_NOTIFIER_HEAD(avr32_die_chain);
 
 int register_die_notifier(struct notifier_block *nb)
 {
-	pr_debug("register_die_notifier: %p\n", nb);
-
 	return atomic_notifier_chain_register(&avr32_die_chain, nb);
 }
 EXPORT_SYMBOL(register_die_notifier);
@@ -163,93 +36,103 @@ EXPORT_SYMBOL(unregister_die_notifier);
 
 static DEFINE_SPINLOCK(die_lock);
 
-void __die(const char *str, struct pt_regs *regs, unsigned long err,
-	   const char *file, const char *func, unsigned long line)
+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
 {
-	struct task_struct *tsk = current;
 	static int die_counter;
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
 
-	printk(KERN_ALERT "%s", str);
-	if (file && func)
-		printk(" in %s:%s, line %ld", file, func, line);
-	printk("[#%d]:\n", ++die_counter);
-	print_modules();
-	show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-	       tsk->comm, tsk->pid, tsk->thread_info + 1);
-
-	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->sp,
-			 THREAD_SIZE + (unsigned long)tsk->thread_info);
+	printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
+	       str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+	printk("PREEMPT ");
+#endif
+#ifdef CONFIG_FRAME_POINTER
+	printk("FRAME_POINTER ");
+#endif
+	if (current_cpu_data.features & AVR32_FEATURE_OCD) {
+		unsigned long did = __mfdr(DBGREG_DID);
+		printk("chip: 0x%03lx:0x%04lx rev %lu\n",
+		       (did >> 1) & 0x7ff,
+		       (did >> 12) & 0x7fff,
+		       (did >> 28) & 0xf);
+	} else {
+		printk("cpu: arch %u r%u / core %u r%u\n",
+		       current_cpu_data.arch_type,
+		       current_cpu_data.arch_revision,
+		       current_cpu_data.cpu_type,
+		       current_cpu_data.cpu_revision);
 	}
 
+	print_modules();
+	show_regs_log_lvl(regs, KERN_EMERG);
+	show_stack_log_lvl(current, regs->sp, regs, KERN_EMERG);
 	bust_spinlocks(0);
 	spin_unlock_irq(&die_lock);
-	do_exit(SIGSEGV);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops)
+		panic("Fatal exception");
+
+	do_exit(err);
 }
 
-void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err,
-		     const char *file, const char *func, unsigned long line)
+void _exception(long signr, struct pt_regs *regs, int code,
+		unsigned long addr)
 {
+	siginfo_t info;
+
 	if (!user_mode(regs))
-		__die(str, regs, err, file, func, line);
-}
+		die("Unhandled exception in kernel mode", regs, signr);
+
+	memset(&info, 0, sizeof(info));
+	info.si_signo = signr;
+	info.si_code = code;
+	info.si_addr = (void __user *)addr;
+	force_sig_info(signr, &info, current);
 
-asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
-{
-#ifdef CONFIG_SUBARCH_AVR32B
 	/*
-	 * The exception entry always saves RSR_EX. For NMI, this is
-	 * wrong; it should be RSR_NMI
+	 * Init gets no signals that it doesn't have a handler for.
+	 * That's all very well, but if it has caused a synchronous
+	 * exception and we ignore the resulting signal, it will just
+	 * generate the same exception over and over again and we get
+	 * nowhere.  Better to kill it and let the kernel panic.
 	 */
-	regs->sr = sysreg_read(RSR_NMI);
-#endif
+	if (is_init(current)) {
+		__sighandler_t handler;
+
+		spin_lock_irq(&current->sighand->siglock);
+		handler = current->sighand->action[signr-1].sa.sa_handler;
+		spin_unlock_irq(&current->sighand->siglock);
+		if (handler == SIG_DFL) {
+			/* init has generated a synchronous exception
+			   and it doesn't have a handler for the signal */
+			printk(KERN_CRIT "init has generated signal %ld "
+			       "but has no handler for it\n", signr);
+			do_exit(signr);
+		}
+	}
+}
 
-	printk("NMI taken!!!!\n");
-	die("NMI", regs, ecr);
-	BUG();
+asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
+{
+	printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
+	show_regs_log_lvl(regs, KERN_ALERT);
+	show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
 }
 
 asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
 {
-	printk("Unable to handle critical exception %lu at pc = %08lx!\n",
-	       ecr, regs->pc);
-	die("Oops", regs, ecr);
-	BUG();
+	die("Critical exception", regs, SIGKILL);
 }
 
 asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs)
 {
-	siginfo_t info;
-
-	die_if_kernel("Oops: Address exception in kernel mode", regs, ecr);
-
-#ifdef DEBUG
-	if (ecr == ECR_ADDR_ALIGN_X)
-		pr_debug("Instruction Address Exception at pc = %08lx\n",
-			 regs->pc);
-	else if (ecr == ECR_ADDR_ALIGN_R)
-		pr_debug("Data Address Exception (Read) at pc = %08lx\n",
-			 regs->pc);
-	else if (ecr == ECR_ADDR_ALIGN_W)
-		pr_debug("Data Address Exception (Write) at pc = %08lx\n",
-			 regs->pc);
-	else
-		BUG();
-
-	show_regs(regs);
-#endif
-
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRALN;
-	info.si_addr = (void __user *)regs->pc;
-
-	force_sig_info(SIGBUS, &info, current);
+	_exception(SIGBUS, regs, BUS_ADRALN, regs->pc);
 }
 
 /* This way of handling undefined instructions is stolen from ARM */
@@ -274,7 +157,8 @@ static int do_cop_absent(u32 insn)
 {
 	int cop_nr;
 	u32 cpucr;
-	if ( (insn & 0xfdf00000) == 0xf1900000 )
+
+	if ((insn & 0xfdf00000) == 0xf1900000)
 		/* LDC0 */
 		cop_nr = 0;
 	else
@@ -286,136 +170,91 @@ static int do_cop_absent(u32 insn)
 	sysreg_write(CPUCR, cpucr);
 
 	cpucr = sysreg_read(CPUCR);
-	if ( !(cpucr & (1 << (24 + cop_nr))) ){
-		printk("Coprocessor #%i not found!\n", cop_nr);
-		return -1;
-	}
+	if (!(cpucr & (1 << (24 + cop_nr))))
+		return -ENODEV;
 
 	return 0;
 }
 
-#ifdef CONFIG_BUG
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
-{
-	char *file;
-	u16 line;
-	char c;
-
-	if (__get_user(line, (u16 __user *)(regs->pc + 2)))
-		return;
-	if (__get_user(file, (char * __user *)(regs->pc + 4))
-	    || (unsigned long)file < PAGE_OFFSET
-	    || __get_user(c, file))
-		file = "<bad filename>";
-
-	printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
-}
-#else
-static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
+int is_valid_bugaddr(unsigned long pc)
 {
+	unsigned short opcode;
 
+	if (pc < PAGE_OFFSET)
+		return 0;
+	if (probe_kernel_address((u16 *)pc, opcode))
+		return 0;
+
+	return opcode == AVR32_BUG_OPCODE;
 }
-#endif
-#endif
 
 asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 {
 	u32 insn;
 	struct undef_hook *hook;
-	siginfo_t info;
 	void __user *pc;
+	long code;
 
-	if (!user_mode(regs))
-		goto kernel_trap;
+	if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
+		enum bug_trap_type type;
+
+		type = report_bug(regs->pc);
+		switch (type) {
+		case BUG_TRAP_TYPE_NONE:
+			break;
+		case BUG_TRAP_TYPE_WARN:
+			regs->pc += 2;
+			return;
+		case BUG_TRAP_TYPE_BUG:
+			die("Kernel BUG", regs, SIGKILL);
+		}
+	}
 
 	local_irq_enable();
 
-	pc = (void __user *)instruction_pointer(regs);
-	if (__get_user(insn, (u32 __user *)pc))
-		goto invalid_area;
+	if (user_mode(regs)) {
+		pc = (void __user *)instruction_pointer(regs);
+		if (get_user(insn, (u32 __user *)pc))
+			goto invalid_area;
 
-        if (ecr == ECR_COPROC_ABSENT) {
-		if (do_cop_absent(insn) == 0)
+		if (ecr == ECR_COPROC_ABSENT && !do_cop_absent(insn))
 			return;
-        }
 
-	spin_lock_irq(&undef_lock);
-	list_for_each_entry(hook, &undef_hook, node) {
-		if ((insn & hook->insn_mask) == hook->insn_val) {
-			if (hook->fn(regs, insn) == 0) {
-				spin_unlock_irq(&undef_lock);
-				return;
+		spin_lock_irq(&undef_lock);
+		list_for_each_entry(hook, &undef_hook, node) {
+			if ((insn & hook->insn_mask) == hook->insn_val) {
+				if (hook->fn(regs, insn) == 0) {
+					spin_unlock_irq(&undef_lock);
+					return;
+				}
 			}
 		}
+		spin_unlock_irq(&undef_lock);
 	}
-	spin_unlock_irq(&undef_lock);
-
-invalid_area:
-
-#ifdef DEBUG
-	printk("Illegal instruction at pc = %08lx\n", regs->pc);
-	if (regs->pc < TASK_SIZE) {
-		unsigned long ptbr, pgd, pte, *p;
-
-		ptbr = sysreg_read(PTBR);
-		p = (unsigned long *)ptbr;
-		pgd = p[regs->pc >> 22];
-		p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000);
-		pte = p[(regs->pc >> 12) & 0x3ff];
-		printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte);
-	}
-#endif
 
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_addr = (void __user *)regs->pc;
 	switch (ecr) {
-	case ECR_ILLEGAL_OPCODE:
-	case ECR_UNIMPL_INSTRUCTION:
-		info.si_code = ILL_ILLOPC;
-		break;
 	case ECR_PRIVILEGE_VIOLATION:
-		info.si_code = ILL_PRVOPC;
+		code = ILL_PRVOPC;
 		break;
 	case ECR_COPROC_ABSENT:
-		info.si_code = ILL_COPROC;
+		code = ILL_COPROC;
 		break;
 	default:
-		BUG();
+		code = ILL_ILLOPC;
+		break;
 	}
 
-	force_sig_info(SIGILL, &info, current);
+	_exception(SIGILL, regs, code, regs->pc);
 	return;
 
-kernel_trap:
-#ifdef CONFIG_BUG
-	if (__kernel_text_address(instruction_pointer(regs))) {
-		insn = *(u16 *)instruction_pointer(regs);
-		if (insn == AVR32_BUG_OPCODE) {
-			do_bug_verbose(regs, insn);
-			die("Kernel BUG", regs, 0);
-			return;
-		}
-	}
-#endif
-
-	die("Oops: Illegal instruction in kernel code", regs, ecr);
+invalid_area:
+	_exception(SIGSEGV, regs, SEGV_MAPERR, regs->pc);
 }
 
 asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs)
 {
-	siginfo_t info;
-
-	printk("Floating-point exception at pc = %08lx\n", regs->pc);
-
-	/* We have no FPU... */
-	info.si_signo = SIGILL;
-	info.si_errno = 0;
-	info.si_addr = (void __user *)regs->pc;
-	info.si_code = ILL_COPROC;
-
-	force_sig_info(SIGILL, &info, current);
+	/* We have no FPU yet */
+	_exception(SIGILL, regs, ILL_COPROC, regs->pc);
 }
 
 
diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c
index ef13b7c78935..7ad20cfb48a8 100644
--- a/arch/avr32/kernel/vmlinux.lds.c
+++ b/arch/avr32/kernel/vmlinux.lds.c
@@ -26,6 +26,12 @@ SECTIONS
 			_sinittext = .;
 			*(.text.reset)
 			*(.init.text)
+			/*
+			 * .exit.text is discarded at runtime, not
+			 * link time, to deal with references from
+			 * __bug_table
+			 */
+			*(.exit.text)
 			_einittext = .;
 		. = ALIGN(4);
 		__tagtable_begin = .;
@@ -86,6 +92,8 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
+	BUG_TABLE
+
 	RODATA
 
 	. = ALIGN(8192);
@@ -126,7 +134,6 @@ SECTIONS
 	 * thrown away, as cleanup code is never called unless it's a module.
 	 */
 	/DISCARD/       	: {
-		*(.exit.text)
 		*(.exit.data)
 		*(.exitcall.exit)
 	}
diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig
new file mode 100644
index 000000000000..eb307838457b
--- /dev/null
+++ b/arch/avr32/mach-at32ap/Kconfig
@@ -0,0 +1,31 @@
+if PLATFORM_AT32AP
+
+menu "Atmel AVR32 AP options"
+
+choice
+	prompt "AT32AP7000 static memory bus width"
+	depends on CPU_AT32AP7000
+	default AP7000_16_BIT_SMC
+	help
+	  Define the width of the AP7000 external static memory interface.
+	  This is used to determine how to mangle the address and/or data
+	  when doing little-endian port access.
+
+	  The current code can only support a single external memory bus
+	  width for all chip selects, excluding the flash (which is using
+	  raw access and is thus not affected by any of this.)
+
+config AP7000_32_BIT_SMC
+	bool "32 bit"
+
+config AP7000_16_BIT_SMC
+	bool "16 bit"
+
+config AP7000_8_BIT_SMC
+	bool "8 bit"
+
+endchoice
+
+endmenu
+
+endif # PLATFORM_AT32AP
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index b21bea9af8b1..f1d395724ac6 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,2 +1,3 @@
 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
 obj-$(CONFIG_CPU_AT32AP7000)	+= at32ap7000.o
+obj-$(CONFIG_CPU_AT32AP7000)	+= time-tc.o
diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c
index bc235507c5c7..56db45b99a0f 100644
--- a/arch/avr32/mach-at32ap/at32ap7000.c
+++ b/arch/avr32/mach-at32ap/at32ap7000.c
@@ -18,6 +18,7 @@
 #include <asm/arch/sm.h>
 
 #include "clock.h"
+#include "hmatrix.h"
 #include "pio.h"
 #include "sm.h"
 
@@ -416,7 +417,15 @@ struct platform_device at32_sm_device = {
 	.resource	= sm_resource,
 	.num_resources	= ARRAY_SIZE(sm_resource),
 };
-DEV_CLK(pclk, at32_sm, pbb, 0);
+static struct clk at32_sm_pclk = {
+	.name		= "pclk",
+	.dev		= &at32_sm_device.dev,
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.users		= 1,
+	.index		= 0,
+};
 
 static struct resource intc0_resource[] = {
 	PBMEM(0xfff00400),
@@ -442,6 +451,7 @@ static struct clk hramc_clk = {
 	.mode		= hsb_clk_mode,
 	.get_rate	= hsb_clk_get_rate,
 	.users		= 1,
+	.index		= 3,
 };
 
 static struct resource smc0_resource[] = {
@@ -467,6 +477,57 @@ static struct clk pico_clk = {
 };
 
 /* --------------------------------------------------------------------
+ * HMATRIX
+ * -------------------------------------------------------------------- */
+
+static struct clk hmatrix_clk = {
+	.name		= "hmatrix_clk",
+	.parent		= &pbb_clk,
+	.mode		= pbb_clk_mode,
+	.get_rate	= pbb_clk_get_rate,
+	.index		= 2,
+	.users		= 1,
+};
+#define HMATRIX_BASE	((void __iomem *)0xfff00800)
+
+#define hmatrix_readl(reg)					\
+	__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
+#define hmatrix_writel(reg,value)				\
+	__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
+
+/*
+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
+ * External Bus Interface (EBI). This can be used to enable special
+ * features like CompactFlash support, NAND Flash support, etc. on
+ * certain chipselects.
+ */
+static inline void set_ebi_sfr_bits(u32 mask)
+{
+	u32 sfr;
+
+	clk_enable(&hmatrix_clk);
+	sfr = hmatrix_readl(SFR4);
+	sfr |= mask;
+	hmatrix_writel(SFR4, sfr);
+	clk_disable(&hmatrix_clk);
+}
+
+/* --------------------------------------------------------------------
+ *  System Timer/Counter (TC)
+ * -------------------------------------------------------------------- */
+static struct resource at32_systc0_resource[] = {
+	PBMEM(0xfff00c00),
+	IRQ(22),
+};
+struct platform_device at32_systc0_device = {
+	.name		= "systc",
+	.id		= 0,
+	.resource	= at32_systc0_resource,
+	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+};
+DEV_CLK(pclk, at32_systc0, pbb, 3);
+
+/* --------------------------------------------------------------------
  *  PIO
  * -------------------------------------------------------------------- */
 
@@ -514,6 +575,8 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&smc0_device);
 	platform_device_register(&pdc_device);
 
+	platform_device_register(&at32_systc0_device);
+
 	platform_device_register(&pio0_device);
 	platform_device_register(&pio1_device);
 	platform_device_register(&pio2_device);
@@ -752,7 +815,7 @@ static struct resource atmel_spi1_resource[] = {
 DEFINE_DEV(atmel_spi, 1);
 DEV_CLK(spi_clk, atmel_spi1, pba, 1);
 
-static void
+static void __init
 at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
 		      unsigned int n, const u8 *pins)
 {
@@ -950,6 +1013,7 @@ struct clk *at32_clock_list[] = {
 	&pbb_clk,
 	&at32_sm_pclk,
 	&at32_intc0_pclk,
+	&hmatrix_clk,
 	&ebi_clk,
 	&hramc_clk,
 	&smc0_pclk,
@@ -962,6 +1026,7 @@ struct clk *at32_clock_list[] = {
 	&pio2_mck,
 	&pio3_mck,
 	&pio4_mck,
+	&at32_systc0_pclk,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
@@ -1024,6 +1089,9 @@ void __init at32_clock_init(void)
 	for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
 		struct clk *clk = at32_clock_list[i];
 
+		if (clk->users == 0)
+			continue;
+
 		if (clk->mode == &cpu_clk_mode)
 			cpu_mask |= 1 << clk->index;
 		else if (clk->mode == &hsb_clk_mode)
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 49e7b12fe710..00c435452d7e 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006 Atmel Corporation
  *
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
  *   Copyright (C) 2005 David Brownell
  *   Copyright (C) 2005 Ivan Kokshaysky
  *
diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
index f953f044ba4d..bb8e1f295835 100644
--- a/arch/avr32/mach-at32ap/clock.h
+++ b/arch/avr32/mach-at32ap/clock.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2006 Atmel Corporation
  *
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
  *   Copyright (C) 2005 David Brownell
  *   Copyright (C) 2005 Ivan Kokshaysky
  *
diff --git a/arch/avr32/mach-at32ap/hmatrix.h b/arch/avr32/mach-at32ap/hmatrix.h
new file mode 100644
index 000000000000..d10bfb60d68d
--- /dev/null
+++ b/arch/avr32/mach-at32ap/hmatrix.h
@@ -0,0 +1,182 @@
+/*
+ * Register definitions for High-Speed Bus Matrix
+ */
+#ifndef __HMATRIX_H
+#define __HMATRIX_H
+
+/* HMATRIX register offsets */
+#define HMATRIX_MCFG0				0x0000
+#define HMATRIX_MCFG1				0x0004
+#define HMATRIX_MCFG2				0x0008
+#define HMATRIX_MCFG3				0x000c
+#define HMATRIX_MCFG4				0x0010
+#define HMATRIX_MCFG5				0x0014
+#define HMATRIX_MCFG6				0x0018
+#define HMATRIX_MCFG7				0x001c
+#define HMATRIX_MCFG8				0x0020
+#define HMATRIX_MCFG9				0x0024
+#define HMATRIX_MCFG10				0x0028
+#define HMATRIX_MCFG11				0x002c
+#define HMATRIX_MCFG12				0x0030
+#define HMATRIX_MCFG13				0x0034
+#define HMATRIX_MCFG14				0x0038
+#define HMATRIX_MCFG15				0x003c
+#define HMATRIX_SCFG0				0x0040
+#define HMATRIX_SCFG1				0x0044
+#define HMATRIX_SCFG2				0x0048
+#define HMATRIX_SCFG3				0x004c
+#define HMATRIX_SCFG4				0x0050
+#define HMATRIX_SCFG5				0x0054
+#define HMATRIX_SCFG6				0x0058
+#define HMATRIX_SCFG7				0x005c
+#define HMATRIX_SCFG8				0x0060
+#define HMATRIX_SCFG9				0x0064
+#define HMATRIX_SCFG10				0x0068
+#define HMATRIX_SCFG11				0x006c
+#define HMATRIX_SCFG12				0x0070
+#define HMATRIX_SCFG13				0x0074
+#define HMATRIX_SCFG14				0x0078
+#define HMATRIX_SCFG15				0x007c
+#define HMATRIX_PRAS0				0x0080
+#define HMATRIX_PRBS0				0x0084
+#define HMATRIX_PRAS1				0x0088
+#define HMATRIX_PRBS1				0x008c
+#define HMATRIX_PRAS2				0x0090
+#define HMATRIX_PRBS2				0x0094
+#define HMATRIX_PRAS3				0x0098
+#define HMATRIX_PRBS3				0x009c
+#define HMATRIX_PRAS4				0x00a0
+#define HMATRIX_PRBS4				0x00a4
+#define HMATRIX_PRAS5				0x00a8
+#define HMATRIX_PRBS5				0x00ac
+#define HMATRIX_PRAS6				0x00b0
+#define HMATRIX_PRBS6				0x00b4
+#define HMATRIX_PRAS7				0x00b8
+#define HMATRIX_PRBS7				0x00bc
+#define HMATRIX_PRAS8				0x00c0
+#define HMATRIX_PRBS8				0x00c4
+#define HMATRIX_PRAS9				0x00c8
+#define HMATRIX_PRBS9				0x00cc
+#define HMATRIX_PRAS10				0x00d0
+#define HMATRIX_PRBS10				0x00d4
+#define HMATRIX_PRAS11				0x00d8
+#define HMATRIX_PRBS11				0x00dc
+#define HMATRIX_PRAS12				0x00e0
+#define HMATRIX_PRBS12				0x00e4
+#define HMATRIX_PRAS13				0x00e8
+#define HMATRIX_PRBS13				0x00ec
+#define HMATRIX_PRAS14				0x00f0
+#define HMATRIX_PRBS14				0x00f4
+#define HMATRIX_PRAS15				0x00f8
+#define HMATRIX_PRBS15				0x00fc
+#define HMATRIX_MRCR				0x0100
+#define HMATRIX_SFR0				0x0110
+#define HMATRIX_SFR1				0x0114
+#define HMATRIX_SFR2				0x0118
+#define HMATRIX_SFR3				0x011c
+#define HMATRIX_SFR4				0x0120
+#define HMATRIX_SFR5				0x0124
+#define HMATRIX_SFR6				0x0128
+#define HMATRIX_SFR7				0x012c
+#define HMATRIX_SFR8				0x0130
+#define HMATRIX_SFR9				0x0134
+#define HMATRIX_SFR10				0x0138
+#define HMATRIX_SFR11				0x013c
+#define HMATRIX_SFR12				0x0140
+#define HMATRIX_SFR13				0x0144
+#define HMATRIX_SFR14				0x0148
+#define HMATRIX_SFR15				0x014c
+
+/* Bitfields in MCFGx */
+#define HMATRIX_ULBT_OFFSET			0
+#define HMATRIX_ULBT_SIZE			3
+
+/* Bitfields in SCFGx */
+#define HMATRIX_SLOT_CYCLE_OFFSET		0
+#define HMATRIX_SLOT_CYCLE_SIZE			8
+#define HMATRIX_DEFMSTR_TYPE_OFFSET		16
+#define HMATRIX_DEFMSTR_TYPE_SIZE		2
+#define HMATRIX_FIXED_DEFMSTR_OFFSET		18
+#define HMATRIX_FIXED_DEFMSTR_SIZE		4
+#define HMATRIX_ARBT_OFFSET			24
+#define HMATRIX_ARBT_SIZE			2
+
+/* Bitfields in PRASx */
+#define HMATRIX_M0PR_OFFSET			0
+#define HMATRIX_M0PR_SIZE			4
+#define HMATRIX_M1PR_OFFSET			4
+#define HMATRIX_M1PR_SIZE			4
+#define HMATRIX_M2PR_OFFSET			8
+#define HMATRIX_M2PR_SIZE			4
+#define HMATRIX_M3PR_OFFSET			12
+#define HMATRIX_M3PR_SIZE			4
+#define HMATRIX_M4PR_OFFSET			16
+#define HMATRIX_M4PR_SIZE			4
+#define HMATRIX_M5PR_OFFSET			20
+#define HMATRIX_M5PR_SIZE			4
+#define HMATRIX_M6PR_OFFSET			24
+#define HMATRIX_M6PR_SIZE			4
+#define HMATRIX_M7PR_OFFSET			28
+#define HMATRIX_M7PR_SIZE			4
+
+/* Bitfields in PRBSx */
+#define HMATRIX_M8PR_OFFSET			0
+#define HMATRIX_M8PR_SIZE			4
+#define HMATRIX_M9PR_OFFSET			4
+#define HMATRIX_M9PR_SIZE			4
+#define HMATRIX_M10PR_OFFSET			8
+#define HMATRIX_M10PR_SIZE			4
+#define HMATRIX_M11PR_OFFSET			12
+#define HMATRIX_M11PR_SIZE			4
+#define HMATRIX_M12PR_OFFSET			16
+#define HMATRIX_M12PR_SIZE			4
+#define HMATRIX_M13PR_OFFSET			20
+#define HMATRIX_M13PR_SIZE			4
+#define HMATRIX_M14PR_OFFSET			24
+#define HMATRIX_M14PR_SIZE			4
+#define HMATRIX_M15PR_OFFSET			28
+#define HMATRIX_M15PR_SIZE			4
+
+/* Bitfields in SFR4 */
+#define HMATRIX_CS1A_OFFSET			1
+#define HMATRIX_CS1A_SIZE			1
+#define HMATRIX_CS3A_OFFSET			3
+#define HMATRIX_CS3A_SIZE			1
+#define HMATRIX_CS4A_OFFSET			4
+#define HMATRIX_CS4A_SIZE			1
+#define HMATRIX_CS5A_OFFSET			5
+#define HMATRIX_CS5A_SIZE			1
+#define HMATRIX_DBPUC_OFFSET			8
+#define HMATRIX_DBPUC_SIZE			1
+
+/* Constants for ULBT */
+#define HMATRIX_ULBT_INFINITE			0
+#define HMATRIX_ULBT_SINGLE			1
+#define HMATRIX_ULBT_FOUR_BEAT			2
+#define HMATRIX_ULBT_EIGHT_BEAT			3
+#define HMATRIX_ULBT_SIXTEEN_BEAT		4
+
+/* Constants for DEFMSTR_TYPE */
+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT		0
+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT	1
+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT	2
+
+/* Constants for ARBT */
+#define HMATRIX_ARBT_ROUND_ROBIN		0
+#define HMATRIX_ARBT_FIXED_PRIORITY		1
+
+/* Bit manipulation macros */
+#define HMATRIX_BIT(name)					\
+	(1 << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BF(name,value)					\
+	(((value) & ((1 << HMATRIX_##name##_SIZE) - 1))		\
+	 << HMATRIX_##name##_OFFSET)
+#define HMATRIX_BFEXT(name,value)				\
+	(((value) >> HMATRIX_##name##_OFFSET)			\
+	 & ((1 << HMATRIX_##name##_SIZE) - 1))
+#define HMATRIX_BFINS(name,value,old)				\
+	(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1)		\
+		    << HMATRIX_##name##_OFFSET))		\
+	 | HMATRIX_BF(name,value))
+
+#endif /* __HMATRIX_H */
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index 7691721928a7..5e22a750632b 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -75,12 +75,35 @@ int smc_set_configuration(int cs, const struct smc_config *config)
 		return -EINVAL;
 	}
 
+	switch (config->nwait_mode) {
+	case 0:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
+		break;
+	case 1:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
+		break;
+	case 2:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
+		break;
+	case 3:
+		mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (config->tdf_cycles) {
+		mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
+	}
+
 	if (config->nrd_controlled)
 		mode |= HSMC_BIT(READ_MODE);
 	if (config->nwe_controlled)
 		mode |= HSMC_BIT(WRITE_MODE);
 	if (config->byte_write)
 		mode |= HSMC_BIT(BAT);
+	if (config->tdf_mode)
+		mode |= HSMC_BIT(TDF_MODE);
 
 	pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
 		 cs, setup, pulse, cycle, mode);
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 9ba5654cde11..1eb99b814f5b 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -214,7 +214,7 @@ int gpio_direction_input(unsigned int gpio)
 }
 EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned int gpio)
+int gpio_direction_output(unsigned int gpio, int value)
 {
 	struct pio_device *pio;
 	unsigned int pin;
@@ -223,6 +223,8 @@ int gpio_direction_output(unsigned int gpio)
 	if (!pio)
 		return -ENODEV;
 
+	gpio_set_value(gpio, value);
+
 	pin = gpio & 0x1f;
 	pio_writel(pio, OER, 1 << pin);
 
diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c
new file mode 100644
index 000000000000..e3070bdd4bb9
--- /dev/null
+++ b/arch/avr32/mach-at32ap/time-tc.c
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * Based on MIPS implementation arch/mips/kernel/time.c
+ *   Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/time.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/sysdev.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+#include <asm/sysreg.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+
+#include <asm/arch/time.h>
+
+/* how many counter cycles in a jiffy? */
+static u32 cycles_per_jiffy;
+
+/* the count value for the next timer interrupt */
+static u32 expirelo;
+
+/* the I/O registers of the TC module */
+static void __iomem *ioregs;
+
+cycle_t read_cycle_count(void)
+{
+	return (cycle_t)timer_read(ioregs, 0, CV);
+}
+
+struct clocksource clocksource_avr32 = {
+	.name		= "avr32",
+	.rating		= 342,
+	.read		= read_cycle_count,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.shift		= 16,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void avr32_timer_ack(void)
+{
+	u16 count = expirelo;
+
+	/* Ack this timer interrupt and set the next one, use a u16
+	 * variable so it will wrap around correctly */
+	count += cycles_per_jiffy;
+	expirelo = count;
+	timer_write(ioregs, 0, RC, expirelo);
+
+	/* Check to see if we have missed any timer interrupts */
+	count = timer_read(ioregs, 0, CV);
+	if ((count - expirelo) < 0x7fff) {
+		expirelo = count + cycles_per_jiffy;
+		timer_write(ioregs, 0, RC, expirelo);
+	}
+}
+
+u32 avr32_hpt_read(void)
+{
+	return timer_read(ioregs, 0, CV);
+}
+
+static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
+{
+	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
+	unsigned int divs[] = { 4, 8, 16, 32 };
+	int divs_size = sizeof(divs) / sizeof(*divs);
+	int i = 0;
+	unsigned long count_hz;
+	unsigned long shift;
+	unsigned long mult;
+	int clock_div = -1;
+	u64 tmp;
+
+	shift = clocksource_avr32.shift;
+
+	do {
+		count_hz = clk_get_rate(pclk) / divs[i];
+		mult = clocksource_hz2mult(count_hz, shift);
+		clocksource_avr32.mult = mult;
+
+		tmp = TICK_NSEC;
+		tmp <<= shift;
+		tmp += mult / 2;
+		do_div(tmp, mult);
+
+		cycles_per_jiffy = tmp;
+	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
+
+	clock_div = i + 1;
+
+	if (clock_div > divs_size) {
+		pr_debug("timer: could not calculate clock divider\n");
+		return -EFAULT;
+	}
+
+	/* Set the clock divider */
+	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
+
+	return 0;
+}
+
+int avr32_hpt_init(unsigned int count)
+{
+	struct resource *regs;
+	struct clk *pclk;
+	int irq = -1;
+	int ret = 0;
+
+	ret = -ENXIO;
+
+	irq = platform_get_irq(&at32_systc0_device, 0);
+	if (irq < 0) {
+		pr_debug("timer: could not get irq\n");
+		goto out_error;
+	}
+
+	pclk = clk_get(&at32_systc0_device.dev, "pclk");
+	if (IS_ERR(pclk)) {
+		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
+		goto out_error;
+	}
+	clk_enable(pclk);
+
+	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
+	if (!regs) {
+		pr_debug("timer: could not get resource\n");
+		goto out_error_clk;
+	}
+
+	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!ioregs) {
+		pr_debug("timer: could not get ioregs\n");
+		goto out_error_clk;
+	}
+
+	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
+	if (ret)
+		goto out_error_io;
+
+	ret = setup_irq(irq, &timer_irqaction);
+	if (ret) {
+		pr_debug("timer: could not request irq %d: %d\n",
+				irq, ret);
+		goto out_error_io;
+	}
+
+	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
+		* cycles_per_jiffy;
+
+	/* Enable clock and interrupts on RC compare */
+	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
+	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
+	/* Set cycles to first interrupt */
+	timer_write(ioregs, 0,  RC, expirelo);
+
+	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
+			ioregs, irq);
+
+	return 0;
+
+out_error_io:
+	iounmap(ioregs);
+out_error_clk:
+	clk_put(pclk);
+out_error:
+	return ret;
+}
+
+int avr32_hpt_start(void)
+{
+	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
+	return 0;
+}
+
+irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+	unsigned int sr = timer_read(ioregs, 0, SR);
+
+	if (sr & TIMER_BIT(SR_CPCS)) {
+		/* ack timer interrupt and try to set next interrupt */
+		avr32_timer_ack();
+
+		/*
+		 * Call the generic timer interrupt handler
+		 */
+		write_seqlock(&xtime_lock);
+		do_timer(1);
+		write_sequnlock(&xtime_lock);
+
+		/*
+		 * In UP mode, we call local_timer_interrupt() to do profiling
+		 * and process accounting.
+		 *
+		 * SMP is not supported yet.
+		 */
+		local_timer_interrupt(irq, dev_id);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
diff --git a/arch/avr32/mm/cache.c b/arch/avr32/mm/cache.c
index fb13f72e9a02..8f7b1c3cd0f9 100644
--- a/arch/avr32/mm/cache.c
+++ b/arch/avr32/mm/cache.c
@@ -121,9 +121,8 @@ void flush_icache_range(unsigned long start, unsigned long end)
 void flush_icache_page(struct vm_area_struct *vma, struct page *page)
 {
 	if (vma->vm_flags & VM_EXEC) {
-		void *v = kmap(page);
+		void *v = page_address(page);
 		__flush_icache_range((unsigned long)v, (unsigned long)v + PAGE_SIZE);
-		kunmap(v);
 	}
 }
 
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index 678557260a35..146ebdbdc302 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -16,26 +16,8 @@
 #include <asm/kdebug.h>
 #include <asm/mmu_context.h>
 #include <asm/sysreg.h>
-#include <asm/uaccess.h>
 #include <asm/tlb.h>
-
-#ifdef DEBUG
-static void dump_code(unsigned long pc)
-{
-	char *p = (char *)pc;
-	char val;
-	int i;
-
-
-	printk(KERN_DEBUG "Code:");
-	for (i = 0; i < 16; i++) {
-		if (__get_user(val, p + i))
-			break;
-		printk(" %02x", val);
-	}
-	printk("\n");
-}
-#endif
+#include <asm/uaccess.h>
 
 #ifdef CONFIG_KPROBES
 ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
@@ -68,17 +50,19 @@ static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
 }
 #endif
 
+int exception_trace = 1;
+
 /*
  * This routine handles page faults. It determines the address and the
  * problem, and then passes it off to one of the appropriate routines.
  *
  * ecr is the Exception Cause Register. Possible values are:
- *   5:  Page not found (instruction access)
  *   6:  Protection fault (instruction access)
- *   12: Page not found (read access)
- *   13: Page not found (write access)
- *   14: Protection fault (read access)
- *   15: Protection fault (write access)
+ *   15: Protection fault (read access)
+ *   16: Protection fault (write access)
+ *   20: Page not found (instruction access)
+ *   24: Page not found (read access)
+ *   28: Page not found (write access)
  */
 asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 {
@@ -88,7 +72,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 	const struct exception_table_entry *fixup;
 	unsigned long address;
 	unsigned long page;
-	int writeaccess = 0;
+	int writeaccess;
+	long signr;
+	int code;
 
 	if (notify_page_fault(DIE_PAGE_FAULT, regs,
 			      ecr, SIGSEGV) == NOTIFY_STOP)
@@ -99,6 +85,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 	tsk = current;
 	mm = tsk->mm;
 
+	signr = SIGSEGV;
+	code = SEGV_MAPERR;
+
 	/*
 	 * If we're in an interrupt or have no user context, we must
 	 * not take the fault...
@@ -125,7 +114,9 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
 	 * can handle it...
 	 */
 good_area:
-	//pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags);
+	code = SEGV_ACCERR;
+	writeaccess = 0;
+
 	switch (ecr) {
 	case ECR_PROTECTION_X:
 	case ECR_TLB_MISS_X:
@@ -176,46 +167,24 @@ survive:
 	 * map. Fix it, but check if it's kernel or user first...
 	 */
 bad_area:
-	pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n",
-		 tsk->comm, tsk->pid, address, ecr);
-
 	up_read(&mm->mmap_sem);
 
 	if (user_mode(regs)) {
-		/* Hmm...we have to pass address and ecr somehow... */
-		/* tsk->thread.address = address;
-		   tsk->thread.error_code = ecr; */
-#ifdef DEBUG
-		show_regs(regs);
-		dump_code(regs->pc);
-
-		page = sysreg_read(PTBR);
-		printk("ptbr = %08lx", page);
-		if (page) {
-			page = ((unsigned long *)page)[address >> 22];
-			printk(" pgd = %08lx", page);
-			if (page & _PAGE_PRESENT) {
-				page &= PAGE_MASK;
-				address &= 0x003ff000;
-				page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
-				printk(" pte = %08lx\n", page);
-			}
-		}
-#endif
-		pr_debug("Sending SIGSEGV to PID %d...\n",
-			tsk->pid);
-		force_sig(SIGSEGV, tsk);
+		if (exception_trace)
+			printk("%s%s[%d]: segfault at %08lx pc %08lx "
+			       "sp %08lx ecr %lu\n",
+			       is_init(tsk) ? KERN_EMERG : KERN_INFO,
+			       tsk->comm, tsk->pid, address, regs->pc,
+			       regs->sp, ecr);
+		_exception(SIGSEGV, regs, code, address);
 		return;
 	}
 
 no_context:
-	pr_debug("No context\n");
-
 	/* Are we prepared to handle this kernel fault? */
 	fixup = search_exception_tables(regs->pc);
 	if (fixup) {
 		regs->pc = fixup->fixup;
-		pr_debug("Found fixup at %08lx\n", fixup->fixup);
 		return;
 	}
 
@@ -230,7 +199,6 @@ no_context:
 		printk(KERN_ALERT
 		       "Unable to handle kernel paging request");
 	printk(" at virtual address %08lx\n", address);
-	printk(KERN_ALERT "pc = %08lx\n", regs->pc);
 
 	page = sysreg_read(PTBR);
 	printk(KERN_ALERT "ptbr = %08lx", page);
@@ -241,20 +209,20 @@ no_context:
 			page &= PAGE_MASK;
 			address &= 0x003ff000;
 			page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
-			printk(" pte = %08lx\n", page);
+			printk(" pte = %08lx", page);
 		}
 	}
-	die("\nOops", regs, ecr);
-	do_exit(SIGKILL);
+	printk("\n");
+	die("Kernel access of bad area", regs, signr);
+	return;
 
 	/*
 	 * We ran out of memory, or some other thing happened to us
 	 * that made us unable to handle the page fault gracefully.
 	 */
 out_of_memory:
-	printk("Out of memory\n");
 	up_read(&mm->mmap_sem);
-	if (current->pid == 1) {
+	if (is_init(current)) {
 		yield();
 		down_read(&mm->mmap_sem);
 		goto survive;
@@ -267,21 +235,20 @@ out_of_memory:
 do_sigbus:
 	up_read(&mm->mmap_sem);
 
-	/*
-	 * Send a sigbus, regardless of whether we were in kernel or
-	 * user mode.
-	 */
-	/* address, error_code, trap_no, ... */
-#ifdef DEBUG
-	show_regs(regs);
-	dump_code(regs->pc);
-#endif
-	pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid);
-	force_sig(SIGBUS, tsk);
-
 	/* Kernel mode? Handle exceptions or die */
+	signr = SIGBUS;
+	code = BUS_ADRERR;
 	if (!user_mode(regs))
 		goto no_context;
+
+	if (exception_trace)
+		printk("%s%s[%d]: bus error at %08lx pc %08lx "
+		       "sp %08lx ecr %lu\n",
+		       is_init(tsk) ? KERN_EMERG : KERN_INFO,
+		       tsk->comm, tsk->pid, address, regs->pc,
+		       regs->sp, ecr);
+
+	_exception(SIGBUS, regs, BUS_ADRERR, address);
 }
 
 asmlinkage void do_bus_error(unsigned long addr, int write_access,
@@ -292,8 +259,7 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access,
 	       addr, write_access ? "write" : "read");
 	printk(KERN_INFO "DTLB dump:\n");
 	dump_dtlb();
-	die("Bus Error", regs, write_access);
-	do_exit(SIGKILL);
+	die("Bus Error", regs, SIGKILL);
 }
 
 /*
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 70da6894acc1..82cf70854b90 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -10,11 +10,9 @@
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/init.h>
-#include <linux/initrd.h>
 #include <linux/mmzone.h>
 #include <linux/bootmem.h>
 #include <linux/pagemap.h>
-#include <linux/pfn.h>
 #include <linux/nodemask.h>
 
 #include <asm/page.h>
@@ -78,242 +76,6 @@ void show_mem(void)
 	printk ("%d pages swap cached\n", cached);
 }
 
-static void __init print_memory_map(const char *what,
-				    struct tag_mem_range *mem)
-{
-	printk ("%s:\n", what);
-	for (; mem; mem = mem->next) {
-		printk ("  %08lx - %08lx\n",
-			(unsigned long)mem->addr,
-			(unsigned long)(mem->addr + mem->size));
-	}
-}
-
-#define MAX_LOWMEM	HIGHMEM_START
-#define MAX_LOWMEM_PFN	PFN_DOWN(MAX_LOWMEM)
-
-/*
- * Sort a list of memory regions in-place by ascending address.
- *
- * We're using bubble sort because we only have singly linked lists
- * with few elements.
- */
-static void __init sort_mem_list(struct tag_mem_range **pmem)
-{
-	int done;
-	struct tag_mem_range **a, **b;
-
-	if (!*pmem)
-		return;
-
-	do {
-		done = 1;
-		a = pmem, b = &(*pmem)->next;
-		while (*b) {
-			if ((*a)->addr > (*b)->addr) {
-				struct tag_mem_range *tmp;
-				tmp = (*b)->next;
-				(*b)->next = *a;
-				*a = *b;
-				*b = tmp;
-				done = 0;
-			}
-			a = &(*a)->next;
-			b = &(*a)->next;
-		}
-	} while (!done);
-}
-
-/*
- * Find a free memory region large enough for storing the
- * bootmem bitmap.
- */
-static unsigned long __init
-find_bootmap_pfn(const struct tag_mem_range *mem)
-{
-	unsigned long bootmap_pages, bootmap_len;
-	unsigned long node_pages = PFN_UP(mem->size);
-	unsigned long bootmap_addr = mem->addr;
-	struct tag_mem_range *reserved = mem_reserved;
-	struct tag_mem_range *ramdisk = mem_ramdisk;
-	unsigned long kern_start = virt_to_phys(_stext);
-	unsigned long kern_end = virt_to_phys(_end);
-
-	bootmap_pages = bootmem_bootmap_pages(node_pages);
-	bootmap_len = bootmap_pages << PAGE_SHIFT;
-
-	/*
-	 * Find a large enough region without reserved pages for
-	 * storing the bootmem bitmap. We can take advantage of the
-	 * fact that all lists have been sorted.
-	 *
-	 * We have to check explicitly reserved regions as well as the
-	 * kernel image and any RAMDISK images...
-	 *
-	 * Oh, and we have to make sure we don't overwrite the taglist
-	 * since we're going to use it until the bootmem allocator is
-	 * fully up and running.
-	 */
-	while (1) {
-		if ((bootmap_addr < kern_end) &&
-		    ((bootmap_addr + bootmap_len) > kern_start))
-			bootmap_addr = kern_end;
-
-		while (reserved &&
-		       (bootmap_addr >= (reserved->addr + reserved->size)))
-			reserved = reserved->next;
-
-		if (reserved &&
-		    ((bootmap_addr + bootmap_len) >= reserved->addr)) {
-			bootmap_addr = reserved->addr + reserved->size;
-			continue;
-		}
-
-		while (ramdisk &&
-		       (bootmap_addr >= (ramdisk->addr + ramdisk->size)))
-			ramdisk = ramdisk->next;
-
-		if (!ramdisk ||
-		    ((bootmap_addr + bootmap_len) < ramdisk->addr))
-			break;
-
-		bootmap_addr = ramdisk->addr + ramdisk->size;
-	}
-
-	if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size))
-		return ~0UL;
-
-	return PFN_UP(bootmap_addr);
-}
-
-void __init setup_bootmem(void)
-{
-	unsigned bootmap_size;
-	unsigned long first_pfn, bootmap_pfn, pages;
-	unsigned long max_pfn, max_low_pfn;
-	unsigned long kern_start = virt_to_phys(_stext);
-	unsigned long kern_end = virt_to_phys(_end);
-	unsigned node = 0;
-	struct tag_mem_range *bank, *res;
-
-	sort_mem_list(&mem_phys);
-	sort_mem_list(&mem_reserved);
-
-	print_memory_map("Physical memory", mem_phys);
-	print_memory_map("Reserved memory", mem_reserved);
-
-	nodes_clear(node_online_map);
-
-	if (mem_ramdisk) {
-#ifdef CONFIG_BLK_DEV_INITRD
-		initrd_start = (unsigned long)__va(mem_ramdisk->addr);
-		initrd_end = initrd_start + mem_ramdisk->size;
-
-		print_memory_map("RAMDISK images", mem_ramdisk);
-		if (mem_ramdisk->next)
-			printk(KERN_WARNING
-			       "Warning: Only the first RAMDISK image "
-			       "will be used\n");
-		sort_mem_list(&mem_ramdisk);
-#else
-		printk(KERN_WARNING "RAM disk image present, but "
-		       "no initrd support in kernel!\n");
-#endif
-	}
-
-	if (mem_phys->next)
-		printk(KERN_WARNING "Only using first memory bank\n");
-
-	for (bank = mem_phys; bank; bank = NULL) {
-		first_pfn = PFN_UP(bank->addr);
-		max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size);
-		bootmap_pfn = find_bootmap_pfn(bank);
-		if (bootmap_pfn > max_pfn)
-			panic("No space for bootmem bitmap!\n");
-
-		if (max_low_pfn > MAX_LOWMEM_PFN) {
-			max_low_pfn = MAX_LOWMEM_PFN;
-#ifndef CONFIG_HIGHMEM
-			/*
-			 * Lowmem is memory that can be addressed
-			 * directly through P1/P2
-			 */
-			printk(KERN_WARNING
-			       "Node %u: Only %ld MiB of memory will be used.\n",
-			       node, MAX_LOWMEM >> 20);
-			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-#else
-#error HIGHMEM is not supported by AVR32 yet
-#endif
-		}
-
-		/* Initialize the boot-time allocator with low memory only. */
-		bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
-						 first_pfn, max_low_pfn);
-
-		printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n",
-		       node, NODE_DATA(node)->bdata,
-		       NODE_DATA(node)->bdata->node_bootmem_map);
-
-		/*
-		 * Register fully available RAM pages with the bootmem
-		 * allocator.
-		 */
-		pages = max_low_pfn - first_pfn;
-		free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
-				   PFN_PHYS(pages));
-
-		/*
-		 * Reserve space for the kernel image (if present in
-		 * this node)...
-		 */
-		if ((kern_start >= PFN_PHYS(first_pfn)) &&
-		    (kern_start < PFN_PHYS(max_pfn))) {
-			printk("Node %u: Kernel image %08lx - %08lx\n",
-			       node, kern_start, kern_end);
-			reserve_bootmem_node(NODE_DATA(node), kern_start,
-					     kern_end - kern_start);
-		}
-
-		/* ...the bootmem bitmap... */
-		reserve_bootmem_node(NODE_DATA(node),
-				     PFN_PHYS(bootmap_pfn),
-				     bootmap_size);
-
-		/* ...any RAMDISK images... */
-		for (res = mem_ramdisk; res; res = res->next) {
-			if (res->addr > PFN_PHYS(max_pfn))
-				break;
-
-			if (res->addr >= PFN_PHYS(first_pfn)) {
-				printk("Node %u: RAMDISK %08lx - %08lx\n",
-				       node,
-				       (unsigned long)res->addr,
-				       (unsigned long)(res->addr + res->size));
-				reserve_bootmem_node(NODE_DATA(node),
-						     res->addr, res->size);
-			}
-		}
-
-		/* ...and any other reserved regions. */
-		for (res = mem_reserved; res; res = res->next) {
-			if (res->addr > PFN_PHYS(max_pfn))
-				break;
-
-			if (res->addr >= PFN_PHYS(first_pfn)) {
-				printk("Node %u: Reserved %08lx - %08lx\n",
-				       node,
-				       (unsigned long)res->addr,
-				       (unsigned long)(res->addr + res->size));
-				reserve_bootmem_node(NODE_DATA(node),
-						     res->addr, res->size);
-			}
-		}
-
-		node_set_online(node);
-	}
-}
-
 /*
  * paging_init() sets up the page tables
  *
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 107796e50149..d47cfbf98d6e 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -311,7 +311,7 @@ pcf8563_register(void)
 {
 	pcf8563_init();
 	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-		printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
+		printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n",
 		       PCF8563_NAME, PCF8563_MAJOR);
 		return -1;
 	}
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 544ab0179411..24b919b3821a 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -171,7 +171,7 @@ pcf8563_init(void)
 		goto err;
 
 	if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-		printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
+		printk(KERN_INFO "%s: Unable to get major number %d for RTC device.\n",
 		       PCF8563_NAME, PCF8563_MAJOR);
 		return -1;
 	}
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index a2b9c60c2777..5b79a7a772d4 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -100,7 +100,9 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	if ((err = pcibios_enable_resources(dev, mask)) < 0)
 		return err;
 
-	return pcibios_enable_irq(dev);
+	if (!dev->msi_enabled)
+		pcibios_enable_irq(dev);
+	return 0;
 }
 
 int pcibios_assign_resources(void)
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index 426b09878a05..70d3bf0c92e8 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -111,7 +111,7 @@ int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
 	return DMA_MEMORY_IO;
 
  free1_out:
-	kfree(dev->dma_mem->bitmap);
+	kfree(dev->dma_mem);
  out:
 	return 0;
 }
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index f7279d78995a..0b581e3cf7c7 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -466,6 +466,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 
 	if ((err = pcibios_enable_resources(dev, mask)) < 0)
 		return err;
-	pcibios_enable_irq(dev);
+	if (!dev->msi_enabled)
+		pcibios_enable_irq(dev);
 	return 0;
 }
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 3f3a0ed3539b..4103c2c487f3 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -126,8 +126,7 @@ void __init paging_init(void)
 
 	/* distribute the allocatable pages across the various zones and pass them to the allocator
 	 */
-	zones_size[ZONE_DMA]     = max_low_pfn - min_low_pfn;
-	zones_size[ZONE_NORMAL]  = 0;
+	zones_size[ZONE_NORMAL]  = max_low_pfn - min_low_pfn;
 #ifdef CONFIG_HIGHMEM
 	zones_size[ZONE_HIGHMEM] = num_physpages - num_mappedpages;
 #endif
diff --git a/arch/h8300/kernel/ints.c b/arch/h8300/kernel/ints.c
index 587ef7f4fcc7..3e4f479271c9 100644
--- a/arch/h8300/kernel/ints.c
+++ b/arch/h8300/kernel/ints.c
@@ -19,6 +19,7 @@
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/random.h>
 #include <linux/bootmem.h>
diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c
index 567f681ddfec..a71d6e2a3919 100644
--- a/arch/h8300/platform/h8s/ints.c
+++ b/arch/h8300/platform/h8s/ints.c
@@ -20,6 +20,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/bootmem.h>
 #include <linux/random.h>
 #include <linux/hardirq.h>
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 1df4a1f14289..53d62373a524 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -29,6 +29,7 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	default y
+	depends on X86_LOCAL_APIC
 
 config LOCKDEP_SUPPORT
 	bool
@@ -219,11 +220,11 @@ config PARAVIRT
 
 config VMI
 	bool "VMI Paravirt-ops support"
-	depends on PARAVIRT && !NO_HZ
-	default y
+	depends on PARAVIRT && !COMPAT_VDSO
 	help
-	  VMI provides a paravirtualized interface to multiple hypervisors
-	  include VMware ESX server and Xen by connecting to a ROM module
+	  VMI provides a paravirtualized interface to the VMware ESX server
+	  (it could be used by other hypervisors in theory too, but is not
+	  at the moment), by linking the kernel to a GPL-ed ROM module
 	  provided by the hypervisor.
 
 config ACPI_SRAT
@@ -892,7 +893,6 @@ config HOTPLUG_CPU
 config COMPAT_VDSO
 	bool "Compat VDSO support"
 	default y
-	depends on !PARAVIRT
 	help
 	  Map the VDSO to the predictable old-style address too.
 	---help---
@@ -1286,12 +1286,3 @@ config X86_TRAMPOLINE
 config KTIME_SCALAR
 	bool
 	default y
-
-config NO_IDLE_HZ
-	bool
-	depends on PARAVIRT
-	default y
-	help
-	  Switches the regular HZ timer off when the system is going idle.
-	  This helps a hypervisor detect that the Linux system is idle,
-	  reducing the overhead of idle systems.
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index f7ac1aea1d8a..bd28f9f9b4b7 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -31,7 +31,7 @@ LDFLAGS_vmlinux := --emit-relocs
 endif
 CHECKFLAGS	+= -D__i386__
 
-CFLAGS += -pipe -msoft-float -mregparm=3
+CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return
 
 # prevent gcc from keeping the stack 16 byte aligned
 CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
diff --git a/arch/i386/boot/compressed/relocs.c b/arch/i386/boot/compressed/relocs.c
index 881951ca03e1..ce4fda261aaf 100644
--- a/arch/i386/boot/compressed/relocs.c
+++ b/arch/i386/boot/compressed/relocs.c
@@ -11,6 +11,7 @@
 #include <endian.h>
 
 #define MAX_SHDRS 100
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 static Elf32_Ehdr ehdr;
 static Elf32_Shdr shdr[MAX_SHDRS];
 static Elf32_Sym  *symtab[MAX_SHDRS];
@@ -71,7 +72,7 @@ static const char *sym_type(unsigned type)
 #undef SYM_TYPE
 	};
 	const char *name = "unknown sym type name";
-	if (type < sizeof(type_name)/sizeof(type_name[0])) {
+	if (type < ARRAY_SIZE(type_name)) {
 		name = type_name[type];
 	}
 	return name;
@@ -87,7 +88,7 @@ static const char *sym_bind(unsigned bind)
 #undef SYM_BIND
 	};
 	const char *name = "unknown sym bind name";
-	if (bind < sizeof(bind_name)/sizeof(bind_name[0])) {
+	if (bind < ARRAY_SIZE(bind_name)) {
 		name = bind_name[bind];
 	}
 	return name;
@@ -104,7 +105,7 @@ static const char *sym_visibility(unsigned visibility)
 #undef SYM_VISIBILITY
 	};
 	const char *name = "unknown sym visibility name";
-	if (visibility < sizeof(visibility_name)/sizeof(visibility_name[0])) {
+	if (visibility < ARRAY_SIZE(visibility_name)) {
 		name = visibility_name[visibility];
 	}
 	return name;
@@ -128,7 +129,7 @@ static const char *rel_type(unsigned type)
 #undef REL_TYPE
 	};
 	const char *name = "unknown type rel type name";
-	if (type < sizeof(type_name)/sizeof(type_name[0])) {
+	if (type < ARRAY_SIZE(type_name)) {
 		name = type_name[type];
 	}
 	return name;
diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S
index 2c5b5cc55f79..8143c9516cb4 100644
--- a/arch/i386/boot/video.S
+++ b/arch/i386/boot/video.S
@@ -571,6 +571,16 @@ setr1:	lodsw
 	jmp	_m_s
 
 check_vesa:
+#ifdef CONFIG_FIRMWARE_EDID
+	leaw	modelist+1024, %di
+	movw	$0x4f00, %ax
+	int	$0x10
+	cmpw	$0x004f, %ax
+	jnz	setbad
+
+	movw	4(%di), %ax
+	movw	%ax, vbe_version
+#endif
 	leaw	modelist+1024, %di
 	subb	$VIDEO_FIRST_VESA>>8, %bh
 	movw	%bx, %cx			# Get mode information structure
@@ -1945,6 +1955,9 @@ store_edid:
 	rep
 	stosl
 
+	cmpw	$0x0200, vbe_version		# only do EDID on >= VBE2.0
+	jl	no_edid
+
 	pushw   %es				# save ES
 	xorw    %di, %di                        # Report Capability
 	pushw   %di
@@ -1987,6 +2000,7 @@ do_restore:	.byte	0	# Screen contents altered during mode change
 svga_prefix:	.byte	VIDEO_FIRST_BIOS>>8	# Default prefix for BIOS modes
 graphic_mode:	.byte	0	# Graphic mode with a linear frame buffer
 dac_size:	.byte	6	# DAC bit depth
+vbe_version:	.word	0	# VBE bios version
 
 # Status messages
 keymsg:		.ascii	"Press <RETURN> to see video modes available, "
diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index 5ae1e0bc8fd7..c96911c37aea 100644
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -1,10 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-git8
-# Tue Feb 13 11:25:18 2007
+# Linux kernel version: 2.6.21-rc3
+# Wed Mar  7 15:29:47 2007
 #
 CONFIG_X86_32=y
 CONFIG_GENERIC_TIME=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_SEMAPHORE_SLEEPERS=y
@@ -34,6 +37,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -44,6 +48,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -103,6 +108,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Processor type and features
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_SMP=y
 # CONFIG_X86_PC is not set
 # CONFIG_X86_ELAN is not set
@@ -235,10 +243,8 @@ CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_HOTKEY is not set
 CONFIG_ACPI_FAN=y
 # CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
 # CONFIG_ACPI_ASUS is not set
@@ -289,6 +295,7 @@ CONFIG_X86_POWERNOW_K8_ACPI=y
 # CONFIG_X86_CPUFREQ_NFORCE2 is not set
 # CONFIG_X86_LONGRUN is not set
 # CONFIG_X86_LONGHAUL is not set
+# CONFIG_X86_E_POWERSAVER is not set
 
 #
 # shared options
@@ -368,7 +375,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -470,7 +477,13 @@ CONFIG_FW_LOADER=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -490,7 +503,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -500,6 +512,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_SONY_LAPTOP is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -526,6 +539,7 @@ CONFIG_BLK_DEV_IDEACPI=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -678,7 +692,7 @@ CONFIG_SATA_SIL=y
 CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
+CONFIG_SATA_ACPI=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -786,6 +800,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -979,6 +994,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1065,6 +1081,11 @@ CONFIG_HANGCHECK_TIMER=y
 # CONFIG_HWMON_VID is not set
 
 #
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1078,7 +1099,7 @@ CONFIG_HANGCHECK_TIMER=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
 
 #
@@ -1089,7 +1110,6 @@ CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
 CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1238,6 +1258,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1248,6 +1269,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1506,6 +1528,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1525,6 +1548,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index fb3e72328a5a..9ea5b8ecc7e1 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -850,10 +850,9 @@ static inline int acpi_parse_madt_ioapic_entries(void)
 static void __init acpi_process_madt(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
-	int count, error;
+	int error;
 
-	count = acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt);
-	if (count >= 1) {
+	if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
 
 		/*
 		 * Parse MADT LAPIC entries
@@ -1073,7 +1072,28 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 			       "ASUS A7V ACPI BIOS Revision 1007"),
 		     },
 	 },
-
+	{
+		/*
+		 * Latest BIOS for IBM 600E (1.16) has bad pcinum
+		 * for LPC bridge, which is needed for the PCI
+		 * interrupt links to work. DSDT fix is in bug 5966.
+		 * 2645, 2646 model numbers are shared with 600/600E/600X
+		 */
+	 .callback = disable_acpi_irq,
+	 .ident = "IBM Thinkpad 600 Series 2645",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2645"),
+		     },
+	 },
+	{
+	 .callback = disable_acpi_irq,
+	 .ident = "IBM Thinkpad 600 Series 2646",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2646"),
+		     },
+	 },
 	/*
 	 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
 	 */
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
index bf86f7662d8b..8f7efd38254d 100644
--- a/arch/i386/kernel/acpi/earlyquirk.c
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -14,11 +14,8 @@
 
 #ifdef CONFIG_ACPI
 
-static int nvidia_hpet_detected __initdata;
-
 static int __init nvidia_hpet_check(struct acpi_table_header *header)
 {
-	nvidia_hpet_detected = 1;
 	return 0;
 }
 #endif
@@ -26,12 +23,13 @@ static int __init nvidia_hpet_check(struct acpi_table_header *header)
 static int __init check_bridge(int vendor, int device)
 {
 #ifdef CONFIG_ACPI
+	static int warned;
 	/* According to Nvidia all timer overrides are bogus unless HPET
 	   is enabled. */
 	if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
-		nvidia_hpet_detected = 0;
-		acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
-		if (nvidia_hpet_detected == 0) {
+		if (!warned && acpi_table_parse(ACPI_SIG_HPET,
+						nvidia_hpet_check)) {
+			warned = 1;
 			acpi_skip_timer_override = 1;
 			  printk(KERN_INFO "Nvidia board "
                        "detected. Ignoring ACPI "
diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c
index 9eca21b49f6b..426f59b0106b 100644
--- a/arch/i386/kernel/alternative.c
+++ b/arch/i386/kernel/alternative.c
@@ -5,15 +5,9 @@
 #include <asm/alternative.h>
 #include <asm/sections.h>
 
-static int no_replacement    = 0;
 static int smp_alt_once      = 0;
 static int debug_alternative = 0;
 
-static int __init noreplacement_setup(char *s)
-{
-	no_replacement = 1;
-	return 1;
-}
 static int __init bootonly(char *str)
 {
 	smp_alt_once = 1;
@@ -25,7 +19,6 @@ static int __init debug_alt(char *str)
 	return 1;
 }
 
-__setup("noreplacement", noreplacement_setup);
 __setup("smp-alt-boot", bootonly);
 __setup("debug-alternative", debug_alt);
 
@@ -252,9 +245,6 @@ void alternatives_smp_module_add(struct module *mod, char *name,
 	struct smp_alt_module *smp;
 	unsigned long flags;
 
-	if (no_replacement)
-		return;
-
 	if (smp_alt_once) {
 		if (boot_cpu_has(X86_FEATURE_UP))
 			alternatives_smp_unlock(locks, locks_end,
@@ -289,7 +279,7 @@ void alternatives_smp_module_del(struct module *mod)
 	struct smp_alt_module *item;
 	unsigned long flags;
 
-	if (no_replacement || smp_alt_once)
+	if (smp_alt_once)
 		return;
 
 	spin_lock_irqsave(&smp_alt, flags);
@@ -320,7 +310,7 @@ void alternatives_smp_switch(int smp)
 	return;
 #endif
 
-	if (no_replacement || smp_alt_once)
+	if (smp_alt_once)
 		return;
 	BUG_ON(!smp && (num_online_cpus() > 1));
 
@@ -386,13 +376,6 @@ extern struct paravirt_patch __start_parainstructions[],
 void __init alternative_instructions(void)
 {
 	unsigned long flags;
-	if (no_replacement) {
-		printk(KERN_INFO "(SMP-)alternatives turned off\n");
-		free_init_pages("SMP alternatives",
-				(unsigned long)__smp_alt_begin,
-				(unsigned long)__smp_alt_end);
-		return;
-	}
 
 	local_irq_save(flags);
 	apply_alternatives(__alt_instructions, __alt_instructions_end);
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 9655c233e6f1..93aa911646ad 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -28,6 +28,7 @@
 #include <linux/clockchips.h>
 #include <linux/acpi_pmtmr.h>
 #include <linux/module.h>
+#include <linux/dmi.h>
 
 #include <asm/atomic.h>
 #include <asm/smp.h>
@@ -38,7 +39,6 @@
 #include <asm/hpet.h>
 #include <asm/i8253.h>
 #include <asm/nmi.h>
-#include <asm/idle.h>
 
 #include <mach_apic.h>
 #include <mach_apicdef.h>
@@ -62,6 +62,11 @@ static int enable_local_apic __initdata = 0;
 
 /* Local APIC timer verification ok */
 static int local_apic_timer_verify_ok;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int local_apic_timer_disabled;
+/* Local APIC timer works in C2 */
+int local_apic_timer_c2_ok;
+EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 
 /*
  * Debug level, exported for io_apic.c
@@ -339,6 +344,23 @@ void __init setup_boot_APIC_clock(void)
 	void (*real_handler)(struct clock_event_device *dev);
 	unsigned long deltaj;
 	long delta, deltapm;
+	int pm_referenced = 0;
+
+	if (boot_cpu_has(X86_FEATURE_LAPIC_TIMER_BROKEN))
+		local_apic_timer_disabled = 1;
+
+	/*
+	 * The local apic timer can be disabled via the kernel
+	 * commandline or from the test above. Register the lapic
+	 * timer as a dummy clock event source on SMP systems, so the
+	 * broadcast mechanism is used. On UP systems simply ignore it.
+	 */
+	if (local_apic_timer_disabled) {
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
+	}
 
 	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
 		    "calibrating APIC timer ...\n");
@@ -358,7 +380,8 @@ void __init setup_boot_APIC_clock(void)
 	/* Let the interrupts run */
 	local_irq_enable();
 
-	while(lapic_cal_loops <= LAPIC_CAL_LOOPS);
+	while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
+		cpu_relax();
 
 	local_irq_disable();
 
@@ -395,6 +418,7 @@ void __init setup_boot_APIC_clock(void)
 			       "%lu (%ld)\n", (unsigned long) res, delta);
 			delta = (long) res;
 		}
+		pm_referenced = 1;
 	}
 
 	/* Calculate the scaled math multiplication factor */
@@ -424,69 +448,43 @@ void __init setup_boot_APIC_clock(void)
 		    calibration_result / (1000000 / HZ),
 		    calibration_result % (1000000 / HZ));
 
-
-	apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
-
-	/*
-	 * Setup the apic timer manually
-	 */
 	local_apic_timer_verify_ok = 1;
-	levt->event_handler = lapic_cal_handler;
-	lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
-	lapic_cal_loops = -1;
 
-	/* Let the interrupts run */
-	local_irq_enable();
+	/* We trust the pm timer based calibration */
+	if (!pm_referenced) {
+		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
 
-	while(lapic_cal_loops <= LAPIC_CAL_LOOPS);
+		/*
+		 * Setup the apic timer manually
+		 */
+		levt->event_handler = lapic_cal_handler;
+		lapic_timer_setup(CLOCK_EVT_MODE_PERIODIC, levt);
+		lapic_cal_loops = -1;
 
-	local_irq_disable();
+		/* Let the interrupts run */
+		local_irq_enable();
 
-	/* Stop the lapic timer */
-	lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
+		while(lapic_cal_loops <= LAPIC_CAL_LOOPS)
+			cpu_relax();
 
-	local_irq_enable();
+		local_irq_disable();
 
-	/* Jiffies delta */
-	deltaj = lapic_cal_j2 - lapic_cal_j1;
-	apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
+		/* Stop the lapic timer */
+		lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, levt);
 
-	/* Check, if the PM timer is available */
-	deltapm = lapic_cal_pm2 - lapic_cal_pm1;
-	apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
+		local_irq_enable();
 
-	local_apic_timer_verify_ok = 0;
+		/* Jiffies delta */
+		deltaj = lapic_cal_j2 - lapic_cal_j1;
+		apic_printk(APIC_VERBOSE, "... jiffies delta = %lu\n", deltaj);
 
-	if (deltapm) {
-		if (deltapm > (pm_100ms - pm_thresh) &&
-		    deltapm < (pm_100ms + pm_thresh)) {
-			apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
-			/* Check, if the jiffies result is consistent */
-			if (deltaj < LAPIC_CAL_LOOPS-2 ||
-			    deltaj > LAPIC_CAL_LOOPS+2) {
-				/*
-				 * Not sure, what we can do about this one.
-				 * When high resultion timers are active
-				 * and the lapic timer does not stop in C3
-				 * we are fine. Otherwise more trouble might
-				 * be waiting. -- tglx
-				 */
-				printk(KERN_WARNING "Global event device %s "
-				       "has wrong frequency "
-				       "(%lu ticks instead of %d)\n",
-				       global_clock_event->name, deltaj,
-				       LAPIC_CAL_LOOPS);
-			}
-			local_apic_timer_verify_ok = 1;
-		}
-	} else {
 		/* Check, if the jiffies result is consistent */
-		if (deltaj >= LAPIC_CAL_LOOPS-2 &&
-		    deltaj <= LAPIC_CAL_LOOPS+2) {
+		if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2)
 			apic_printk(APIC_VERBOSE, "... jiffies result ok\n");
-			local_apic_timer_verify_ok = 1;
-		}
-	}
+		else
+			local_apic_timer_verify_ok = 0;
+	} else
+		local_irq_enable();
 
 	if (!local_apic_timer_verify_ok) {
 		printk(KERN_WARNING
@@ -494,8 +492,15 @@ void __init setup_boot_APIC_clock(void)
 		/* No broadcast on UP ! */
 		if (num_possible_cpus() == 1)
 			return;
-	} else
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	} else {
+		/*
+		 * If nmi_watchdog is set to IO_APIC, we need the
+		 * PIT/HPET going.  Otherwise register lapic as a dummy
+		 * device.
+		 */
+		if (nmi_watchdog != NMI_IO_APIC)
+			lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	}
 
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
@@ -561,7 +566,6 @@ void fastcall smp_apic_timer_interrupt(struct pt_regs *regs)
 	 * Besides, if we don't timer interrupts ignore the global
 	 * interrupt lock, which is the WrongThing (tm) to do.
 	 */
-	exit_idle();
 	irq_enter();
 	local_apic_timer_interrupt();
 	irq_exit();
@@ -1198,6 +1202,20 @@ static int __init parse_nolapic(char *arg)
 }
 early_param("nolapic", parse_nolapic);
 
+static int __init parse_disable_lapic_timer(char *arg)
+{
+	local_apic_timer_disabled = 1;
+	return 0;
+}
+early_param("nolapic_timer", parse_disable_lapic_timer);
+
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+	local_apic_timer_c2_ok = 1;
+	return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
 static int __init apic_set_verbosity(char *str)
 {
 	if (strcmp("debug", str) == 0)
@@ -1221,7 +1239,6 @@ void smp_spurious_interrupt(struct pt_regs *regs)
 {
 	unsigned long v;
 
-	exit_idle();
 	irq_enter();
 	/*
 	 * Check if this really is a spurious interrupt and ACK it
@@ -1245,7 +1262,6 @@ void smp_error_interrupt(struct pt_regs *regs)
 {
 	unsigned long v, v1;
 
-	exit_idle();
 	irq_enter();
 	/* First tickle the hardware, only then report what went on. -- REW */
 	v = apic_read(APIC_ESR);
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index 41cfea57232b..2d47db482972 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -22,6 +22,37 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
+#define ENABLE_C1E_MASK         0x18000000
+#define CPUID_PROCESSOR_SIGNATURE       1
+#define CPUID_XFAM              0x0ff00000
+#define CPUID_XFAM_K8           0x00000000
+#define CPUID_XFAM_10H          0x00100000
+#define CPUID_XFAM_11H          0x00200000
+#define CPUID_XMOD              0x000f0000
+#define CPUID_XMOD_REV_F        0x00040000
+
+/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */
+static __cpuinit int amd_apic_timer_broken(void)
+{
+	u32 lo, hi;
+	u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
+	switch (eax & CPUID_XFAM) {
+	case CPUID_XFAM_K8:
+		if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F)
+			break;
+	case CPUID_XFAM_10H:
+	case CPUID_XFAM_11H:
+		rdmsr(MSR_K8_ENABLE_C1E, lo, hi);
+		if (lo & ENABLE_C1E_MASK)
+			return 1;
+                break;
+        default:
+                /* err on the side of caution */
+		return 1;
+        }
+	return 0;
+}
+
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
@@ -241,6 +272,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 
 	if (cpuid_eax(0x80000000) >= 0x80000006)
 		num_cache_leaves = 3;
+
+	if (amd_apic_timer_broken())
+		set_bit(X86_FEATURE_LAPIC_TIMER_BROKEN, c->x86_capability);
 }
 
 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
index 6c52182ca323..e912aae9473c 100644
--- a/arch/i386/kernel/cpu/cpufreq/Kconfig
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -125,7 +125,6 @@ config X86_SPEEDSTEP_CENTRINO_ACPI
 	bool "Use ACPI tables to decode valid frequency/voltage (deprecated)"
 	depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
 	depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
-	default y
 	help
 	  This is deprecated and this functionality is now merged into
 	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index b59878a0d9b3..2b030d6ccbf7 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -61,8 +61,8 @@ static int cpu_model;
 static unsigned int numscales=16;
 static unsigned int fsb;
 
-static struct mV_pos *vrm_mV_table;
-static unsigned char *mV_vrm_table;
+static const struct mV_pos *vrm_mV_table;
+static const unsigned char *mV_vrm_table;
 struct f_msr {
 	u8 vrm;
 	u8 pos;
@@ -758,7 +758,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 				NULL, (void *)&pr);
 
 	/* Check ACPI support for C3 state */
-	if (pr != NULL && longhaul_version != TYPE_LONGHAUL_V1) {
+	if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
 		cx = &pr->power.states[ACPI_STATE_C3];
 		if (cx->address > 0 && cx->latency <= 1000) {
 			longhaul_flags |= USE_ACPI_C3;
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.h b/arch/i386/kernel/cpu/cpufreq/longhaul.h
index bb0a04b1d1ab..102548f12842 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.h
@@ -56,7 +56,7 @@ union msr_longhaul {
 /*
  * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
  */
-static int __initdata samuel1_clock_ratio[16] = {
+static const int __initdata samuel1_clock_ratio[16] = {
 	-1, /* 0000 -> RESERVED */
 	30, /* 0001 ->  3.0x */
 	40, /* 0010 ->  4.0x */
@@ -75,7 +75,7 @@ static int __initdata samuel1_clock_ratio[16] = {
 	-1, /* 1111 -> RESERVED */
 };
 
-static int __initdata samuel1_eblcr[16] = {
+static const int __initdata samuel1_eblcr[16] = {
 	50, /* 0000 -> RESERVED */
 	30, /* 0001 ->  3.0x */
 	40, /* 0010 ->  4.0x */
@@ -97,7 +97,7 @@ static int __initdata samuel1_eblcr[16] = {
 /*
  * VIA C3 Samuel2 Stepping 1->15
  */
-static int __initdata samuel2_eblcr[16] = {
+static const int __initdata samuel2_eblcr[16] = {
 	50,  /* 0000 ->  5.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -119,7 +119,7 @@ static int __initdata samuel2_eblcr[16] = {
 /*
  * VIA C3 Ezra
  */
-static int __initdata ezra_clock_ratio[16] = {
+static const int __initdata ezra_clock_ratio[16] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -138,7 +138,7 @@ static int __initdata ezra_clock_ratio[16] = {
 	120, /* 1111 -> 12.0x */
 };
 
-static int __initdata ezra_eblcr[16] = {
+static const int __initdata ezra_eblcr[16] = {
 	50,  /* 0000 ->  5.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -160,7 +160,7 @@ static int __initdata ezra_eblcr[16] = {
 /*
  * VIA C3 (Ezra-T) [C5M].
  */
-static int __initdata ezrat_clock_ratio[32] = {
+static const int __initdata ezrat_clock_ratio[32] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -196,7 +196,7 @@ static int __initdata ezrat_clock_ratio[32] = {
 	-1,  /* 1111 -> RESERVED (12.0x) */
 };
 
-static int __initdata ezrat_eblcr[32] = {
+static const int __initdata ezrat_eblcr[32] = {
 	50,  /* 0000 ->  5.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -235,7 +235,7 @@ static int __initdata ezrat_eblcr[32] = {
 /*
  * VIA C3 Nehemiah */
 
-static int __initdata  nehemiah_clock_ratio[32] = {
+static const int __initdata  nehemiah_clock_ratio[32] = {
 	100, /* 0000 -> 10.0x */
 	160, /* 0001 -> 16.0x */
 	40,  /* 0010 ->  4.0x */
@@ -270,7 +270,7 @@ static int __initdata  nehemiah_clock_ratio[32] = {
 	120, /* 1111 -> 12.0x */
 };
 
-static int __initdata nehemiah_eblcr[32] = {
+static const int __initdata nehemiah_eblcr[32] = {
 	50,  /* 0000 ->  5.0x */
 	160, /* 0001 -> 16.0x */
 	40,  /* 0010 ->  4.0x */
@@ -315,7 +315,7 @@ struct mV_pos {
 	unsigned short pos;
 };
 
-static struct mV_pos __initdata vrm85_mV[32] = {
+static const struct mV_pos __initdata vrm85_mV[32] = {
 	{1250, 8},	{1200, 6},	{1150, 4},	{1100, 2},
 	{1050, 0},	{1800, 30},	{1750, 28},	{1700, 26},
 	{1650, 24},	{1600, 22},	{1550, 20},	{1500, 18},
@@ -326,14 +326,14 @@ static struct mV_pos __initdata vrm85_mV[32] = {
 	{1475, 17},	{1425, 15},	{1375, 13},	{1325, 11}
 };
 
-static unsigned char __initdata mV_vrm85[32] = {
+static const unsigned char __initdata mV_vrm85[32] = {
 	0x04,	0x14,	0x03,	0x13,	0x02,	0x12,	0x01,	0x11,
 	0x00,	0x10,	0x0f,	0x1f,	0x0e,	0x1e,	0x0d,	0x1d,
 	0x0c,	0x1c,	0x0b,	0x1b,	0x0a,	0x1a,	0x09,	0x19,
 	0x08,	0x18,	0x07,	0x17,	0x06,	0x16,	0x05,	0x15
 };
 
-static struct mV_pos __initdata mobilevrm_mV[32] = {
+static const struct mV_pos __initdata mobilevrm_mV[32] = {
 	{1750, 31},	{1700, 30},	{1650, 29},	{1600, 28},
 	{1550, 27},	{1500, 26},	{1450, 25},	{1400, 24},
 	{1350, 23},	{1300, 22},	{1250, 21},	{1200, 20},
@@ -344,7 +344,7 @@ static struct mV_pos __initdata mobilevrm_mV[32] = {
 	{675, 3},	{650, 2},	{625, 1},	{600, 0}
 };
 
-static unsigned char __initdata mV_mobilevrm[32] = {
+static const unsigned char __initdata mV_mobilevrm[32] = {
 	0x1f,	0x1e,	0x1d,	0x1c,	0x1b,	0x1a,	0x19,	0x18,
 	0x17,	0x16,	0x15,	0x14,	0x13,	0x12,	0x11,	0x10,
 	0x0f,	0x0e,	0x0d,	0x0c,	0x0b,	0x0a,	0x09,	0x08,
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
index 54382760983a..837b04166a47 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k7.c
@@ -68,7 +68,7 @@ union powernow_acpi_control_t {
 
 #ifdef CONFIG_CPU_FREQ_DEBUG
 /* divide by 1000 to get VCore voltage in V. */
-static int mobile_vid_table[32] = {
+static const int mobile_vid_table[32] = {
     2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
     1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
     1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
@@ -77,7 +77,7 @@ static int mobile_vid_table[32] = {
 #endif
 
 /* divide by 10 to get FID. */
-static int fid_codes[32] = {
+static const int fid_codes[32] = {
     110, 115, 120, 125, 50, 55, 60, 65,
     70, 75, 80, 85, 90, 95, 100, 105,
     30, 190, 40, 200, 130, 135, 140, 210,
diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
index 8359c19d3a23..504434a46011 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -12,7 +12,6 @@
 #include <asm/system.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
-#include <asm/idle.h>
 
 #include <asm/therm_throt.h>
 
@@ -60,7 +59,6 @@ static void (*vendor_thermal_interrupt)(struct pt_regs *regs) = unexpected_therm
 
 fastcall void smp_thermal_interrupt(struct pt_regs *regs)
 {
-	exit_idle();
 	irq_enter();
 	vendor_thermal_interrupt(regs);
 	irq_exit();
diff --git a/arch/i386/kernel/hpet.c b/arch/i386/kernel/hpet.c
index e1006b7acc9e..17d73459fc5f 100644
--- a/arch/i386/kernel/hpet.c
+++ b/arch/i386/kernel/hpet.c
@@ -3,6 +3,8 @@
 #include <linux/errno.h>
 #include <linux/hpet.h>
 #include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
 
 #include <asm/hpet.h>
 #include <asm/io.h>
@@ -197,16 +199,34 @@ static int hpet_next_event(unsigned long delta,
 	cnt += delta;
 	hpet_writel(cnt, HPET_T0_CMP);
 
-	return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0);
+	return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
 }
 
 /*
+ * Clock source related code
+ */
+static cycle_t read_hpet(void)
+{
+	return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static struct clocksource clocksource_hpet = {
+	.name		= "hpet",
+	.rating		= 250,
+	.read		= read_hpet,
+	.mask		= HPET_MASK,
+	.shift		= HPET_SHIFT,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
  * Try to setup the HPET timer
  */
 int __init hpet_enable(void)
 {
 	unsigned long id;
 	uint64_t hpet_freq;
+	u64 tmp;
 
 	if (!is_hpet_capable())
 		return 0;
@@ -253,6 +273,25 @@ int __init hpet_enable(void)
 	/* Start the counter */
 	hpet_start_counter();
 
+	/* Initialize and register HPET clocksource
+	 *
+	 * hpet period is in femto seconds per cycle
+	 * so we need to convert this to ns/cyc units
+	 * aproximated by mult/2^shift
+	 *
+	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+	 *  (fsec/cyc << shift)/1000000 = mult
+	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
+	 */
+	tmp = (u64)hpet_period << HPET_SHIFT;
+	do_div(tmp, FSEC_PER_NSEC);
+	clocksource_hpet.mult = (u32)tmp;
+
+	clocksource_register(&clocksource_hpet);
+
+
 	if (id & HPET_ID_LEGSUP) {
 		hpet_enable_int();
 		hpet_reserve_platform_timers(id);
@@ -270,52 +309,10 @@ int __init hpet_enable(void)
 out_nohpet:
 	iounmap(hpet_virt_address);
 	hpet_virt_address = NULL;
+	boot_hpet_disable = 1;
 	return 0;
 }
 
-/*
- * Clock source related code
- */
-static cycle_t read_hpet(void)
-{
-	return (cycle_t)hpet_readl(HPET_COUNTER);
-}
-
-static struct clocksource clocksource_hpet = {
-	.name		= "hpet",
-	.rating		= 250,
-	.read		= read_hpet,
-	.mask		= HPET_MASK,
-	.shift		= HPET_SHIFT,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_hpet_clocksource(void)
-{
-	u64 tmp;
-
-	if (!hpet_virt_address)
-		return -ENODEV;
-
-	/*
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * aproximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
-	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
-
-	return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
 
 #ifdef CONFIG_HPET_EMULATE_RTC
 
@@ -527,3 +524,68 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 #endif
+
+
+/*
+ * Suspend/resume part
+ */
+
+#ifdef CONFIG_PM
+
+static int hpet_suspend(struct sys_device *sys_device, pm_message_t state)
+{
+	unsigned long cfg = hpet_readl(HPET_CFG);
+
+	cfg &= ~(HPET_CFG_ENABLE|HPET_CFG_LEGACY);
+	hpet_writel(cfg, HPET_CFG);
+
+	return 0;
+}
+
+static int hpet_resume(struct sys_device *sys_device)
+{
+	unsigned int id;
+
+	hpet_start_counter();
+
+	id = hpet_readl(HPET_ID);
+
+	if (id & HPET_ID_LEGSUP)
+		hpet_enable_int();
+
+	return 0;
+}
+
+static struct sysdev_class hpet_class = {
+	set_kset_name("hpet"),
+	.suspend	= hpet_suspend,
+	.resume		= hpet_resume,
+};
+
+static struct sys_device hpet_device = {
+	.id		= 0,
+	.cls		= &hpet_class,
+};
+
+
+static __init int hpet_register_sysfs(void)
+{
+	int err;
+
+	if (!is_hpet_capable())
+		return 0;
+
+	err = sysdev_class_register(&hpet_class);
+
+	if (!err) {
+		err = sysdev_register(&hpet_device);
+		if (err)
+			sysdev_class_unregister(&hpet_class);
+	}
+
+	return err;
+}
+
+device_initcall(hpet_register_sysfs);
+
+#endif
diff --git a/arch/i386/kernel/i386_ksyms.c b/arch/i386/kernel/i386_ksyms.c
index e3d4b73bfdb0..4afe26e86260 100644
--- a/arch/i386/kernel/i386_ksyms.c
+++ b/arch/i386/kernel/i386_ksyms.c
@@ -28,3 +28,5 @@ EXPORT_SYMBOL(__read_lock_failed);
 #endif
 
 EXPORT_SYMBOL(csum_partial);
+
+EXPORT_SYMBOL(_proxy_pda);
diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c
index a6bc7bb38834..10cef5ca8a5b 100644
--- a/arch/i386/kernel/i8253.c
+++ b/arch/i386/kernel/i8253.c
@@ -47,9 +47,17 @@ static void init_pit_timer(enum clock_event_mode mode,
 		outb(LATCH >> 8 , PIT_CH0);	/* MSB */
 		break;
 
-	case CLOCK_EVT_MODE_ONESHOT:
+	/*
+	 * Avoid unnecessary state transitions, as it confuses
+	 * Geode / Cyrix based boxen.
+	 */
 	case CLOCK_EVT_MODE_SHUTDOWN:
+		if (evt->mode == CLOCK_EVT_MODE_UNUSED)
+			break;
 	case CLOCK_EVT_MODE_UNUSED:
+		if (evt->mode == CLOCK_EVT_MODE_SHUTDOWN)
+			break;
+	case CLOCK_EVT_MODE_ONESHOT:
 		/* One shot setup */
 		outb_p(0x38, PIT_MODE);
 		udelay(10);
@@ -195,4 +203,4 @@ static int __init init_pit_clocksource(void)
 	clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
 	return clocksource_register(&clocksource_pit);
 }
-module_init(init_pit_clocksource);
+arch_initcall(init_pit_clocksource);
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 4ccebd454e25..b3ab8ffebd27 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -343,7 +343,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 			break;
 		entry = irq_2_pin + entry->next;
 	}
-	set_native_irq_info(irq, cpumask);
+	irq_desc[irq].affinity = cpumask;
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -736,7 +736,7 @@ failed:
 	return 0;
 }
 
-int __init irqbalance_disable(char *str)
+int __devinit irqbalance_disable(char *str)
 {
 	irqbalance_disabled = 1;
 	return 1;
@@ -1354,7 +1354,6 @@ static void __init setup_IO_APIC_irqs(void)
 		}
 		spin_lock_irqsave(&ioapic_lock, flags);
 		__ioapic_write_entry(apic, pin, entry);
-		set_native_irq_info(irq, TARGET_CPUS);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
 	}
@@ -2585,7 +2584,7 @@ static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
 
 	write_msi_msg(irq, &msg);
-	set_native_irq_info(irq, mask);
+	irq_desc[irq].affinity = mask;
 }
 #endif /* CONFIG_SMP */
 
@@ -2669,7 +2668,7 @@ static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
 	dest = cpu_mask_to_apicid(mask);
 
 	target_ht_irq(irq, dest);
-	set_native_irq_info(irq, mask);
+	irq_desc[irq].affinity = mask;
 }
 #endif
 
@@ -2875,7 +2874,6 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	__ioapic_write_entry(ioapic, pin, entry);
-	set_native_irq_info(irq, TARGET_CPUS);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return 0;
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index 0f2ca590bf23..8db8d514c9c0 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -18,8 +18,6 @@
 #include <linux/cpu.h>
 #include <linux/delay.h>
 
-#include <asm/idle.h>
-
 #include <asm/apic.h>
 #include <asm/uaccess.h>
 
@@ -77,7 +75,6 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs)
 	union irq_ctx *curctx, *irqctx;
 	u32 *isp;
 #endif
-	exit_idle();
 
 	if (unlikely((unsigned)irq >= NR_IRQS)) {
 		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c
index b8f16633a6ec..cbe7ec8dbb9f 100644
--- a/arch/i386/kernel/microcode.c
+++ b/arch/i386/kernel/microcode.c
@@ -567,6 +567,53 @@ static int cpu_request_microcode(int cpu)
 	return error;
 }
 
+static int apply_microcode_on_cpu(int cpu)
+{
+	struct cpuinfo_x86 *c = cpu_data + cpu;
+	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+	cpumask_t old;
+	unsigned int val[2];
+	int err = 0;
+
+	if (!uci->mc)
+		return -EINVAL;
+
+	old = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+	/* Check if the microcode we have in memory matches the CPU */
+	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+	    cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001))
+		err = -EINVAL;
+
+	if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) {
+		/* get processor flags from MSR 0x17 */
+		rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+		if (uci->pf != (1 << ((val[1] >> 18) & 7)))
+			err = -EINVAL;
+	}
+
+	if (!err) {
+		wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+		/* see notes above for revision 1.07.  Apparent chip bug */
+		sync_core();
+		/* get the current revision from MSR 0x8B */
+		rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+		if (uci->rev != val[1])
+			err = -EINVAL;
+	}
+
+	if (!err)
+		apply_microcode(cpu);
+	else
+		printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:"
+			" sig=0x%x, pf=0x%x, rev=0x%x\n",
+			cpu, uci->sig, uci->pf, uci->rev);
+
+	set_cpus_allowed(current, old);
+	return err;
+}
+
 static void microcode_init_cpu(int cpu)
 {
 	cpumask_t old;
@@ -577,7 +624,8 @@ static void microcode_init_cpu(int cpu)
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
 	mutex_lock(&microcode_mutex);
 	collect_cpu_info(cpu);
-	if (uci->valid && system_state == SYSTEM_RUNNING)
+	if (uci->valid && system_state == SYSTEM_RUNNING &&
+	    !suspend_cpu_hotplug)
 		cpu_request_microcode(cpu);
 	mutex_unlock(&microcode_mutex);
 	set_cpus_allowed(current, old);
@@ -663,13 +711,24 @@ static int mc_sysdev_add(struct sys_device *sys_dev)
 		return 0;
 
 	pr_debug("Microcode:CPU %d added\n", cpu);
-	memset(uci, 0, sizeof(*uci));
+	/* If suspend_cpu_hotplug is set, the system is resuming and we should
+	 * use the data from before the suspend.
+	 */
+	if (suspend_cpu_hotplug) {
+		err = apply_microcode_on_cpu(cpu);
+		if (err)
+			microcode_fini_cpu(cpu);
+	}
+	if (!uci->valid)
+		memset(uci, 0, sizeof(*uci));
 
 	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
 	if (err)
 		return err;
 
-	microcode_init_cpu(cpu);
+	if (!uci->valid)
+		microcode_init_cpu(cpu);
+
 	return 0;
 }
 
@@ -680,7 +739,11 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 	pr_debug("Microcode:CPU %d removed\n", cpu);
-	microcode_fini_cpu(cpu);
+	/* If suspend_cpu_hotplug is set, the system is suspending and we should
+	 * keep the microcode in memory for the resume.
+	 */
+	if (!suspend_cpu_hotplug)
+		microcode_fini_cpu(cpu);
 	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 	return 0;
 }
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index 821df34d2b3a..84c3497efb60 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -41,16 +41,17 @@ int nmi_watchdog_enabled;
  *   different subsystems this reservation system just tries to coordinate
  *   things a little
  */
-static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner);
-static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[3]);
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
 
 /* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
  * offset from MSR_P4_BSU_ESCR0.  It will be the max for all platforms (for now)
  */
 #define NMI_MAX_COUNTER_BITS 66
+#define NMI_MAX_COUNTER_LONGS BITS_TO_LONGS(NMI_MAX_COUNTER_BITS)
+
+static DEFINE_PER_CPU(unsigned long, perfctr_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+static DEFINE_PER_CPU(unsigned long, evntsel_nmi_owner[NMI_MAX_COUNTER_LONGS]);
 
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
 /* nmi_active:
  * >0: the lapic NMI watchdog is active, but can be disabled
  * <0: the lapic NMI watchdog has not been set up, and cannot
@@ -122,64 +123,129 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 /* checks for a bit availability (hack for oprofile) */
 int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
 {
+	int cpu;
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+	for_each_possible_cpu (cpu) {
+		if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]))
+			return 0;
+	}
+	return 1;
 }
 
 /* checks the an msr for availability */
 int avail_to_resrv_perfctr_nmi(unsigned int msr)
 {
 	unsigned int counter;
+	int cpu;
 
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+	for_each_possible_cpu (cpu) {
+		if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]))
+			return 0;
+	}
+	return 1;
 }
 
-int reserve_perfctr_nmi(unsigned int msr)
+static int __reserve_perfctr_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
+	if (!test_and_set_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]))
 		return 1;
 	return 0;
 }
 
-void release_perfctr_nmi(unsigned int msr)
+static void __release_perfctr_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
+	clear_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)[0]);
 }
 
-int reserve_evntsel_nmi(unsigned int msr)
+int reserve_perfctr_nmi(unsigned int msr)
+{
+	int cpu, i;
+	for_each_possible_cpu (cpu) {
+		if (!__reserve_perfctr_nmi(cpu, msr)) {
+			for_each_possible_cpu (i) {
+				if (i >= cpu)
+					break;
+				__release_perfctr_nmi(i, msr);
+			}
+			return 0;
+		}
+	}
+	return 1;
+}
+
+void release_perfctr_nmi(unsigned int msr)
+{
+	int cpu;
+	for_each_possible_cpu (cpu) {
+		__release_perfctr_nmi(cpu, msr);
+	}
+}
+
+int __reserve_evntsel_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_evntsel_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]))
+	if (!test_and_set_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]))
 		return 1;
 	return 0;
 }
 
-void release_evntsel_nmi(unsigned int msr)
+static void __release_evntsel_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_evntsel_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner)[0]);
+	clear_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]);
+}
+
+int reserve_evntsel_nmi(unsigned int msr)
+{
+	int cpu, i;
+	for_each_possible_cpu (cpu) {
+		if (!__reserve_evntsel_nmi(cpu, msr)) {
+			for_each_possible_cpu (i) {
+				if (i >= cpu)
+					break;
+				__release_evntsel_nmi(i, msr);
+			}
+			return 0;
+		}
+	}
+	return 1;
+}
+
+void release_evntsel_nmi(unsigned int msr)
+{
+	int cpu;
+	for_each_possible_cpu (cpu) {
+		__release_evntsel_nmi(cpu, msr);
+	}
 }
 
 static __cpuinit inline int nmi_known_cpu(void)
@@ -245,14 +311,6 @@ static int __init check_nmi_watchdog(void)
 	unsigned int *prev_nmi_count;
 	int cpu;
 
-	/* Enable NMI watchdog for newer systems.
-	   Probably safe on most older systems too, but let's be careful.
-	   IBM ThinkPads use INT10 inside SMM and that allows early NMI inside SMM
-	   which hangs the system. Disable watchdog for all thinkpads */
-	if (nmi_watchdog == NMI_DEFAULT && dmi_get_year(DMI_BIOS_DATE) >= 2004 &&
-		!dmi_name_in_vendors("ThinkPad"))
-		nmi_watchdog = NMI_LOCAL_APIC;
-
 	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
 		return 0;
 
@@ -271,7 +329,7 @@ static int __init check_nmi_watchdog(void)
 	for_each_possible_cpu(cpu)
 		prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
 	local_irq_enable();
-	mdelay((10*1000)/nmi_hz); // wait 10 ticks
+	mdelay((20*1000)/nmi_hz); // wait 20 ticks
 
 	for_each_possible_cpu(cpu) {
 #ifdef CONFIG_SMP
@@ -515,10 +573,10 @@ static int setup_k7_watchdog(void)
 
 	perfctr_msr = MSR_K7_PERFCTR0;
 	evntsel_msr = MSR_K7_EVNTSEL0;
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	wrmsrl(perfctr_msr, 0UL);
@@ -541,7 +599,7 @@ static int setup_k7_watchdog(void)
 	wd->check_bit = 1ULL<<63;
 	return 1;
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -552,8 +610,8 @@ static void stop_k7_watchdog(void)
 
 	wrmsr(wd->evntsel_msr, 0, 0);
 
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 #define P6_EVNTSEL0_ENABLE	(1 << 22)
@@ -571,10 +629,10 @@ static int setup_p6_watchdog(void)
 
 	perfctr_msr = MSR_P6_PERFCTR0;
 	evntsel_msr = MSR_P6_EVNTSEL0;
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	wrmsrl(perfctr_msr, 0UL);
@@ -598,7 +656,7 @@ static int setup_p6_watchdog(void)
 	wd->check_bit = 1ULL<<39;
 	return 1;
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -609,8 +667,8 @@ static void stop_p6_watchdog(void)
 
 	wrmsr(wd->evntsel_msr, 0, 0);
 
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 /* Note that these events don't tick when the CPU idles. This means
@@ -676,10 +734,10 @@ static int setup_p4_watchdog(void)
 		cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
 	}
 
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
@@ -703,7 +761,7 @@ static int setup_p4_watchdog(void)
 	wd->check_bit = 1ULL<<39;
 	return 1;
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -715,8 +773,8 @@ static void stop_p4_watchdog(void)
 	wrmsr(wd->cccr_msr, 0, 0);
 	wrmsr(wd->evntsel_msr, 0, 0);
 
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 #define ARCH_PERFMON_NMI_EVENT_SEL	ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
@@ -744,10 +802,10 @@ static int setup_intel_arch_watchdog(void)
 	perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
 	evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
 
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	wrmsrl(perfctr_msr, 0UL);
@@ -772,7 +830,7 @@ static int setup_intel_arch_watchdog(void)
 	wd->check_bit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -795,8 +853,8 @@ static void stop_intel_arch_watchdog(void)
 		return;
 
 	wrmsr(wd->evntsel_msr, 0, 0);
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 void setup_apic_nmi_watchdog (void *unused)
diff --git a/arch/i386/kernel/paravirt.c b/arch/i386/kernel/paravirt.c
index c156ecfa3872..2ec331e03fa9 100644
--- a/arch/i386/kernel/paravirt.c
+++ b/arch/i386/kernel/paravirt.c
@@ -32,6 +32,7 @@
 #include <asm/fixmap.h>
 #include <asm/apic.h>
 #include <asm/tlbflush.h>
+#include <asm/timer.h>
 
 /* nop stub */
 static void native_nop(void)
@@ -493,7 +494,7 @@ struct paravirt_ops paravirt_ops = {
 	.memory_setup = machine_specific_memory_setup,
 	.get_wallclock = native_get_wallclock,
 	.set_wallclock = native_set_wallclock,
-	.time_init = time_init_hook,
+	.time_init = hpet_time_init,
 	.init_IRQ = native_init_IRQ,
 
 	.cpuid = native_cpuid,
@@ -520,6 +521,8 @@ struct paravirt_ops paravirt_ops = {
 	.write_msr = native_write_msr,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
+	.get_scheduled_cycles = native_read_tsc,
+	.get_cpu_khz = native_calculate_cpu_khz,
 	.load_tr_desc = native_load_tr_desc,
 	.set_ldt = native_set_ldt,
 	.load_gdt = native_load_gdt,
@@ -535,7 +538,6 @@ struct paravirt_ops paravirt_ops = {
 
 	.set_iopl_mask = native_set_iopl_mask,
 	.io_delay = native_io_delay,
-	.const_udelay = __const_udelay,
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = native_apic_write,
@@ -550,6 +552,8 @@ struct paravirt_ops paravirt_ops = {
 	.flush_tlb_kernel = native_flush_tlb_global,
 	.flush_tlb_single = native_flush_tlb_single,
 
+	.map_pt_hook = (void *)native_nop,
+
 	.alloc_pt = (void *)native_nop,
 	.alloc_pd = (void *)native_nop,
 	.alloc_pd_clone = (void *)native_nop,
diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c
index 41af692c1584..3ebcea033623 100644
--- a/arch/i386/kernel/pci-dma.c
+++ b/arch/i386/kernel/pci-dma.c
@@ -110,7 +110,7 @@ int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
 	return DMA_MEMORY_IO;
 
  free1_out:
-	kfree(dev->dma_mem->bitmap);
+	kfree(dev->dma_mem);
  out:
 	if (mem_base)
 		iounmap(mem_base);
diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
index bea304d48cdb..393a67d5d943 100644
--- a/arch/i386/kernel/process.c
+++ b/arch/i386/kernel/process.c
@@ -49,7 +49,6 @@
 #include <asm/i387.h>
 #include <asm/desc.h>
 #include <asm/vm86.h>
-#include <asm/idle.h>
 #ifdef CONFIG_MATH_EMULATION
 #include <asm/math_emu.h>
 #endif
@@ -82,42 +81,6 @@ void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
 static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
-static ATOMIC_NOTIFIER_HEAD(idle_notifier);
-
-void idle_notifier_register(struct notifier_block *n)
-{
-	atomic_notifier_chain_register(&idle_notifier, n);
-}
-
-void idle_notifier_unregister(struct notifier_block *n)
-{
-	atomic_notifier_chain_unregister(&idle_notifier, n);
-}
-
-static DEFINE_PER_CPU(volatile unsigned long, idle_state);
-
-void enter_idle(void)
-{
-	/* needs to be atomic w.r.t. interrupts, not against other CPUs */
-	__set_bit(0, &__get_cpu_var(idle_state));
-	atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL);
-}
-
-static void __exit_idle(void)
-{
-	/* needs to be atomic w.r.t. interrupts, not against other CPUs */
-	if (__test_and_clear_bit(0, &__get_cpu_var(idle_state)) == 0)
-		return;
-	atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL);
-}
-
-void exit_idle(void)
-{
-	if (current->pid)
-		return;
-	__exit_idle();
-}
-
 void disable_hlt(void)
 {
 	hlt_counter++;
@@ -168,7 +131,6 @@ EXPORT_SYMBOL(default_idle);
  */
 static void poll_idle (void)
 {
-	local_irq_enable();
 	cpu_relax();
 }
 
@@ -229,16 +191,7 @@ void cpu_idle(void)
 				play_dead();
 
 			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
-
-			/*
-			 * Idle routines should keep interrupts disabled
-			 * from here on, until they go to idle.
-			 * Otherwise, idle callbacks can misfire.
-			 */
-			local_irq_disable();
-			enter_idle();
 			idle();
-			__exit_idle();
 		}
 		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
@@ -293,11 +246,7 @@ void mwait_idle_with_hints(unsigned long eax, unsigned long ecx)
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
 		smp_mb();
 		if (!need_resched())
-			__sti_mwait(eax, ecx);
-		else
-			local_irq_enable();
-	} else {
-		local_irq_enable();
+			__mwait(eax, ecx);
 	}
 }
 
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 122623dcc6e1..698c24fe482e 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -657,5 +657,4 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
-	tsc_init();
 }
diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c
index 9bd9637ae692..0e8977871b1f 100644
--- a/arch/i386/kernel/smp.c
+++ b/arch/i386/kernel/smp.c
@@ -23,7 +23,6 @@
 
 #include <asm/mtrr.h>
 #include <asm/tlbflush.h>
-#include <asm/idle.h>
 #include <mach_apic.h>
 
 /*
@@ -624,7 +623,6 @@ fastcall void smp_call_function_interrupt(struct pt_regs *regs)
 	/*
 	 * At this point the info structure may be out of scope unless wait==1
 	 */
-	exit_idle();
 	irq_enter();
 	(*func)(info);
 	irq_exit();
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 48bfcaa13ecc..4ff55e675576 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -33,11 +33,6 @@
  *		Dave Jones	:	Report invalid combinations of Athlon CPUs.
 *		Rusty Russell	:	Hacked into shape for new "hotplug" boot process. */
 
-
-/* SMP boot always wants to use real time delay to allow sufficient time for
- * the APs to come online */
-#define USE_REAL_TIME_DELAY
-
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -50,6 +45,7 @@
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/percpu.h>
+#include <linux/nmi.h>
 
 #include <linux/delay.h>
 #include <linux/mc146818rtc.h>
@@ -1283,8 +1279,9 @@ void __cpu_die(unsigned int cpu)
 
 int __cpuinit __cpu_up(unsigned int cpu)
 {
+	unsigned long flags;
 #ifdef CONFIG_HOTPLUG_CPU
-	int ret=0;
+	int ret = 0;
 
 	/*
 	 * We do warm boot only on cpus that had booted earlier
@@ -1302,23 +1299,25 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	/* In case one didn't come up */
 	if (!cpu_isset(cpu, cpu_callin_map)) {
 		printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
-		local_irq_enable();
 		return -EIO;
 	}
 
-	local_irq_enable();
-
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 	/* Unleash the CPU! */
 	cpu_set(cpu, smp_commenced_mask);
 
 	/*
-	 * Check TSC synchronization with the AP:
+	 * Check TSC synchronization with the AP (keep irqs disabled
+	 * while doing so):
 	 */
+	local_irq_save(flags);
 	check_tsc_sync_source(cpu);
+	local_irq_restore(flags);
 
-	while (!cpu_isset(cpu, cpu_online_map))
+	while (!cpu_isset(cpu, cpu_online_map)) {
 		cpu_relax();
+		touch_nmi_watchdog();
+	}
 
 #ifdef CONFIG_X86_GENERICARCH
 	if (num_online_cpus() > 8 && genapic == &apic_default)
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index a5350059557a..94e5cb091104 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -262,14 +262,23 @@ void notify_arch_cmos_timer(void)
 
 extern void (*late_time_init)(void);
 /* Duplicate of time_init() below, with hpet_enable part added */
-static void __init hpet_time_init(void)
+void __init hpet_time_init(void)
 {
 	if (!hpet_enable())
 		setup_pit_timer();
-	do_time_init();
+	time_init_hook();
 }
 
+/*
+ * This is called directly from init code; we must delay timer setup in the
+ * HPET case as we can't make the decision to turn on HPET this early in the
+ * boot process.
+ *
+ * The chosen time_init function will usually be hpet_time_init, above, but
+ * in the case of virtual hardware, an alternative function may be substituted.
+ */
 void __init time_init(void)
 {
-	late_time_init = hpet_time_init;
+	tsc_init();
+	late_time_init = choose_time_init();
 }
diff --git a/arch/i386/kernel/topology.c b/arch/i386/kernel/topology.c
index 79cf608e14ca..45782356a618 100644
--- a/arch/i386/kernel/topology.c
+++ b/arch/i386/kernel/topology.c
@@ -1,5 +1,5 @@
 /*
- * arch/i386/kernel/topology.c - Populate driverfs with topology information
+ * arch/i386/kernel/topology.c - Populate sysfs with topology information
  *
  * Written by: Matthew Dobson, IBM Corporation
  * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index 3082a418635c..6cb8f5336732 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -14,16 +14,18 @@
 #include <asm/delay.h>
 #include <asm/tsc.h>
 #include <asm/io.h>
+#include <asm/timer.h>
 
 #include "mach_timer.h"
 
+static int tsc_enabled;
+
 /*
  * On some systems the TSC frequency does not
  * change with the cpu frequency. So we need
  * an extra value to store the TSC freq
  */
 unsigned int tsc_khz;
-unsigned long long (*custom_sched_clock)(void);
 
 int tsc_disable;
 
@@ -102,24 +104,21 @@ unsigned long long sched_clock(void)
 {
 	unsigned long long this_offset;
 
-	if (unlikely(custom_sched_clock))
-		return (*custom_sched_clock)();
-
 	/*
 	 * Fall back to jiffies if there's no TSC available:
 	 */
-	if (unlikely(tsc_disable))
+	if (unlikely(!tsc_enabled))
 		/* No locking but a rare wrong value is not a big deal: */
 		return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
 
 	/* read the Time Stamp Counter: */
-	rdtscll(this_offset);
+	get_scheduled_cycles(this_offset);
 
 	/* return the value in ns */
 	return cycles_2_ns(this_offset);
 }
 
-static unsigned long calculate_cpu_khz(void)
+unsigned long native_calculate_cpu_khz(void)
 {
 	unsigned long long start, end;
 	unsigned long count;
@@ -186,34 +185,6 @@ int recalibrate_cpu_khz(void)
 
 EXPORT_SYMBOL(recalibrate_cpu_khz);
 
-void __init tsc_init(void)
-{
-	if (!cpu_has_tsc || tsc_disable)
-		goto out_no_tsc;
-
-	cpu_khz = calculate_cpu_khz();
-	tsc_khz = cpu_khz;
-
-	if (!cpu_khz)
-		goto out_no_tsc;
-
-	printk("Detected %lu.%03lu MHz processor.\n",
-				(unsigned long)cpu_khz / 1000,
-				(unsigned long)cpu_khz % 1000);
-
-	set_cyc2ns_scale(cpu_khz);
-	use_tsc_delay();
-	return;
-
-out_no_tsc:
-	/*
-	 * Set the tsc_disable flag if there's no TSC support, this
-	 * makes it a fast flag for the kernel to see whether it
-	 * should be using the TSC.
-	 */
-	tsc_disable = 1;
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 /*
@@ -314,6 +285,7 @@ void mark_tsc_unstable(void)
 {
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
+		tsc_enabled = 0;
 		/* Can be called before registration */
 		if (clocksource_tsc.mult)
 			clocksource_change_rating(&clocksource_tsc, 0);
@@ -383,28 +355,49 @@ static void __init check_geode_tsc_reliable(void)
 static inline void check_geode_tsc_reliable(void) { }
 #endif
 
-static int __init init_tsc_clocksource(void)
+
+void __init tsc_init(void)
 {
+	if (!cpu_has_tsc || tsc_disable)
+		goto out_no_tsc;
+
+	cpu_khz = calculate_cpu_khz();
+	tsc_khz = cpu_khz;
+
+	if (!cpu_khz)
+		goto out_no_tsc;
+
+	printk("Detected %lu.%03lu MHz processor.\n",
+				(unsigned long)cpu_khz / 1000,
+				(unsigned long)cpu_khz % 1000);
+
+	set_cyc2ns_scale(cpu_khz);
+	use_tsc_delay();
 
-	if (cpu_has_tsc && tsc_khz && !tsc_disable) {
-		/* check blacklist */
-		dmi_check_system(bad_tsc_dmi_table);
+	/* Check and install the TSC clocksource */
+	dmi_check_system(bad_tsc_dmi_table);
 
-		unsynchronized_tsc();
-		check_geode_tsc_reliable();
-		current_tsc_khz = tsc_khz;
-		clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+	unsynchronized_tsc();
+	check_geode_tsc_reliable();
+	current_tsc_khz = tsc_khz;
+	clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
 							clocksource_tsc.shift);
-		/* lower the rating if we already know its unstable: */
-		if (check_tsc_unstable()) {
-			clocksource_tsc.rating = 0;
-			clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
-		}
+	/* lower the rating if we already know its unstable: */
+	if (check_tsc_unstable()) {
+		clocksource_tsc.rating = 0;
+		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
+	} else
+		tsc_enabled = 1;
 
-		return clocksource_register(&clocksource_tsc);
-	}
+	clocksource_register(&clocksource_tsc);
 
-	return 0;
-}
+	return;
 
-module_init(init_tsc_clocksource);
+out_no_tsc:
+	/*
+	 * Set the tsc_disable flag if there's no TSC support, this
+	 * makes it a fast flag for the kernel to see whether it
+	 * should be using the TSC.
+	 */
+	tsc_disable = 1;
+}
diff --git a/arch/i386/kernel/vmi.c b/arch/i386/kernel/vmi.c
index bb5a7abf949c..697a70e8c0c9 100644
--- a/arch/i386/kernel/vmi.c
+++ b/arch/i386/kernel/vmi.c
@@ -23,7 +23,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/license.h>
 #include <linux/cpu.h>
 #include <linux/bootmem.h>
 #include <linux/mm.h>
@@ -35,6 +34,7 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/vmi_time.h>
+#include <asm/kmap_types.h>
 
 /* Convenient for calling VMI functions indirectly in the ROM */
 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
@@ -47,13 +47,13 @@ typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int);
    (((VROMLONGFUNC *)(rom->func)) (arg))
 
 static struct vrom_header *vmi_rom;
-static int license_gplok;
-static int disable_nodelay;
 static int disable_pge;
 static int disable_pse;
 static int disable_sep;
 static int disable_tsc;
 static int disable_mtrr;
+static int disable_noidle;
+static int disable_vmi_timer;
 
 /* Cached VMI operations */
 struct {
@@ -69,6 +69,7 @@ struct {
 	void (*flush_tlb)(int);
 	void (*set_initial_ap_state)(int, int);
 	void (*halt)(void);
+  	void (*set_lazy_mode)(int mode);
 } vmi_ops;
 
 /* XXX move this to alternative.h */
@@ -255,7 +256,6 @@ static void vmi_nop(void)
 }
 
 /* For NO_IDLE_HZ, we stop the clock when halting the kernel */
-#ifdef CONFIG_NO_IDLE_HZ
 static fastcall void vmi_safe_halt(void)
 {
 	int idle = vmi_stop_hz_timer();
@@ -266,7 +266,6 @@ static fastcall void vmi_safe_halt(void)
 		local_irq_enable();
 	}
 }
-#endif
 
 #ifdef CONFIG_DEBUG_PAGE_TYPE
 
@@ -371,6 +370,24 @@ static void vmi_check_page_type(u32 pfn, int type)
 #define vmi_check_page_type(p,t) do { } while (0)
 #endif
 
+static void vmi_map_pt_hook(int type, pte_t *va, u32 pfn)
+{
+	/*
+	 * Internally, the VMI ROM must map virtual addresses to physical
+	 * addresses for processing MMU updates.  By the time MMU updates
+	 * are issued, this information is typically already lost.
+	 * Fortunately, the VMI provides a cache of mapping slots for active
+	 * page tables.
+	 *
+	 * We use slot zero for the linear mapping of physical memory, and
+	 * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
+	 *
+	 *  args:                 SLOT                 VA    COUNT PFN
+	 */
+	BUG_ON(type != KM_PTE0 && type != KM_PTE1);
+	vmi_ops.set_linear_mapping((type - KM_PTE0)+1, (u32)va, 1, pfn);
+}
+
 static void vmi_allocate_pt(u32 pfn)
 {
 	vmi_set_page_type(pfn, VMI_PAGE_L1);
@@ -508,13 +525,14 @@ void vmi_pmd_clear(pmd_t *pmd)
 #endif
 
 #ifdef CONFIG_SMP
-struct vmi_ap_state ap;
 extern void setup_pda(void);
 
-static void __init /* XXX cpu hotplug */
+static void __devinit
 vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 		     unsigned long start_esp)
 {
+	struct vmi_ap_state ap;
+
 	/* Default everything to zero.  This is fine for most GPRs. */
 	memset(&ap, 0, sizeof(struct vmi_ap_state));
 
@@ -553,10 +571,30 @@ vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
 	/* Protected mode, paging, AM, WP, NE, MP. */
 	ap.cr0 = 0x80050023;
 	ap.cr4 = mmu_cr4_features;
-	vmi_ops.set_initial_ap_state(__pa(&ap), phys_apicid);
+	vmi_ops.set_initial_ap_state((u32)&ap, phys_apicid);
 }
 #endif
 
+static void vmi_set_lazy_mode(int mode)
+{
+	static DEFINE_PER_CPU(int, lazy_mode);
+
+	if (!vmi_ops.set_lazy_mode)
+		return;
+
+	/* Modes should never nest or overlap */
+	BUG_ON(__get_cpu_var(lazy_mode) && !(mode == PARAVIRT_LAZY_NONE ||
+					     mode == PARAVIRT_LAZY_FLUSH));
+
+	if (mode == PARAVIRT_LAZY_FLUSH) {
+		vmi_ops.set_lazy_mode(0);
+		vmi_ops.set_lazy_mode(__get_cpu_var(lazy_mode));
+	} else {
+		vmi_ops.set_lazy_mode(mode);
+		__get_cpu_var(lazy_mode) = mode;
+	}
+}
+
 static inline int __init check_vmi_rom(struct vrom_header *rom)
 {
 	struct pci_header *pci;
@@ -610,13 +648,14 @@ static inline int __init check_vmi_rom(struct vrom_header *rom)
 		rom->api_version_maj, rom->api_version_min,
 		pci->rom_version_maj, pci->rom_version_min);
 
-        license_gplok = license_is_gpl_compatible(license);
-        if (!license_gplok) {
-                printk(KERN_WARNING "VMI: ROM license '%s' taints kernel... "
-		       "inlining disabled\n",
-                       license);
-                add_taint(TAINT_PROPRIETARY_MODULE);
-        }
+	/* Don't allow BSD/MIT here for now because we don't want to end up
+	   with any binary only shim layers */
+	if (strcmp(license, "GPL") && strcmp(license, "GPL v2")) {
+		printk(KERN_WARNING "VMI: Non GPL license `%s' found for ROM. Not used.\n",
+			license);
+		return 0;
+	}
+
 	return 1;
 }
 
@@ -645,12 +684,12 @@ static inline int __init probe_vmi_rom(void)
 void vmi_bringup(void)
 {
  	/* We must establish the lowmem mapping for MMU ops to work */
-	if (vmi_rom)
+	if (vmi_ops.set_linear_mapping)
 		vmi_ops.set_linear_mapping(0, __PAGE_OFFSET, max_low_pfn, 0);
 }
 
 /*
- * Return a pointer to the VMI function or a NOP stub
+ * Return a pointer to a VMI function or NULL if unimplemented
  */
 static void *vmi_get_function(int vmicall)
 {
@@ -661,23 +700,47 @@ static void *vmi_get_function(int vmicall)
 	if (rel->type == VMI_RELOCATION_CALL_REL)
 		return (void *)rel->eip;
 	else
-		return (void *)vmi_nop;
+		return NULL;
 }
 
 /*
  * Helper macro for making the VMI paravirt-ops fill code readable.
- * For unimplemented operations, fall back to default.
+ * For unimplemented operations, fall back to default, unless nop
+ * is returned by the ROM.
  */
 #define para_fill(opname, vmicall)				\
 do {								\
 	reloc = call_vrom_long_func(vmi_rom, get_reloc,		\
 				    VMI_CALL_##vmicall);	\
-	if (rel->type != VMI_RELOCATION_NONE) {			\
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);	\
+	if (rel->type == VMI_RELOCATION_CALL_REL) 		\
 		paravirt_ops.opname = (void *)rel->eip;		\
+	else if (rel->type == VMI_RELOCATION_NOP) 		\
+		paravirt_ops.opname = (void *)vmi_nop;		\
+	else if (rel->type != VMI_RELOCATION_NONE)		\
+		printk(KERN_WARNING "VMI: Unknown relocation "	\
+				    "type %d for " #vmicall"\n",\
+					rel->type);		\
+} while (0)
+
+/*
+ * Helper macro for making the VMI paravirt-ops fill code readable.
+ * For cached operations which do not match the VMI ROM ABI and must
+ * go through a tranlation stub.  Ignore NOPs, since it is not clear
+ * a NOP * VMI function corresponds to a NOP paravirt-op when the
+ * functions are not in 1-1 correspondence.
+ */
+#define para_wrap(opname, wrapper, cache, vmicall)		\
+do {								\
+	reloc = call_vrom_long_func(vmi_rom, get_reloc,		\
+				    VMI_CALL_##vmicall);	\
+	BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);		\
+	if (rel->type == VMI_RELOCATION_CALL_REL) {		\
+		paravirt_ops.opname = wrapper;			\
+		vmi_ops.cache = (void *)rel->eip;		\
 	}							\
 } while (0)
 
+
 /*
  * Activate the VMI interface and switch into paravirtualized mode
  */
@@ -714,13 +777,8 @@ static inline int __init activate_vmi(void)
 	 *  rdpmc is not yet used in Linux
 	 */
 
-	/* CPUID is special, so very special */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	VMI_CALL_CPUID);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops.cpuid = (void *)rel->eip;
-		paravirt_ops.cpuid = vmi_cpuid;
-	}
+	/* CPUID is special, so very special it gets wrapped like a present */
+	para_wrap(cpuid, vmi_cpuid, cpuid, CPUID);
 
 	para_fill(clts, CLTS);
 	para_fill(get_debugreg, GetDR);
@@ -737,38 +795,26 @@ static inline int __init activate_vmi(void)
 	para_fill(restore_fl, SetInterruptMask);
 	para_fill(irq_disable, DisableInterrupts);
 	para_fill(irq_enable, EnableInterrupts);
+
 	/* irq_save_disable !!! sheer pain */
 	patch_offset(&irq_save_disable_callout[IRQ_PATCH_INT_MASK],
 		     (char *)paravirt_ops.save_fl);
 	patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE],
 		     (char *)paravirt_ops.irq_disable);
-#ifndef CONFIG_NO_IDLE_HZ
-	para_fill(safe_halt, Halt);
-#else
-	vmi_ops.halt = vmi_get_function(VMI_CALL_Halt);
-	paravirt_ops.safe_halt = vmi_safe_halt;
-#endif
+
 	para_fill(wbinvd, WBINVD);
+	para_fill(read_tsc, RDTSC);
+
+	/* The following we emulate with trap and emulate for now */
 	/* paravirt_ops.read_msr = vmi_rdmsr */
 	/* paravirt_ops.write_msr = vmi_wrmsr */
-	para_fill(read_tsc, RDTSC);
 	/* paravirt_ops.rdpmc = vmi_rdpmc */
 
-	/* TR interface doesn't pass TR value */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	VMI_CALL_SetTR);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops.set_tr = (void *)rel->eip;
-		paravirt_ops.load_tr_desc = vmi_set_tr;
-	}
+	/* TR interface doesn't pass TR value, wrap */
+	para_wrap(load_tr_desc, vmi_set_tr, set_tr, SetTR);
 
 	/* LDT is special, too */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	VMI_CALL_SetLDT);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops._set_ldt = (void *)rel->eip;
-		paravirt_ops.set_ldt = vmi_set_ldt;
-	}
+	para_wrap(set_ldt, vmi_set_ldt, _set_ldt, SetLDT);
 
 	para_fill(load_gdt, SetGDT);
 	para_fill(load_idt, SetIDT);
@@ -779,28 +825,14 @@ static inline int __init activate_vmi(void)
 	para_fill(write_ldt_entry, WriteLDTEntry);
 	para_fill(write_gdt_entry, WriteGDTEntry);
 	para_fill(write_idt_entry, WriteIDTEntry);
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,
-				    VMI_CALL_UpdateKernelStack);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		BUG_ON(rel->type != VMI_RELOCATION_CALL_REL);
-		vmi_ops.set_kernel_stack = (void *)rel->eip;
-		paravirt_ops.load_esp0 = vmi_load_esp0;
-	}
-
+	para_wrap(load_esp0, vmi_load_esp0, set_kernel_stack, UpdateKernelStack);
 	para_fill(set_iopl_mask, SetIOPLMask);
-	paravirt_ops.io_delay = (void *)vmi_nop;
-	if (!disable_nodelay) {
-		paravirt_ops.const_udelay = (void *)vmi_nop;
-	}
-
-	para_fill(set_lazy_mode, SetLazyMode);
+	para_fill(io_delay, IODelay);
+	para_wrap(set_lazy_mode, vmi_set_lazy_mode, set_lazy_mode, SetLazyMode);
 
-	reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_FlushTLB);
-	if (rel->type != VMI_RELOCATION_NONE) {
-		vmi_ops.flush_tlb = (void *)rel->eip;
-		paravirt_ops.flush_tlb_user = vmi_flush_tlb_user;
-		paravirt_ops.flush_tlb_kernel = vmi_flush_tlb_kernel;
-	}
+	/* user and kernel flush are just handled with different flags to FlushTLB */
+	para_wrap(flush_tlb_user, vmi_flush_tlb_user, flush_tlb, FlushTLB);
+	para_wrap(flush_tlb_kernel, vmi_flush_tlb_kernel, flush_tlb, FlushTLB);
 	para_fill(flush_tlb_single, InvalPage);
 
 	/*
@@ -815,27 +847,40 @@ static inline int __init activate_vmi(void)
 	vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE);
 	vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE);
 #endif
-	vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
-	vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
-	vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
 
-	paravirt_ops.alloc_pt = vmi_allocate_pt;
-	paravirt_ops.alloc_pd = vmi_allocate_pd;
-	paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone;
-	paravirt_ops.release_pt = vmi_release_pt;
-	paravirt_ops.release_pd = vmi_release_pd;
-	paravirt_ops.set_pte = vmi_set_pte;
-	paravirt_ops.set_pte_at = vmi_set_pte_at;
-	paravirt_ops.set_pmd = vmi_set_pmd;
-	paravirt_ops.pte_update = vmi_update_pte;
-	paravirt_ops.pte_update_defer = vmi_update_pte_defer;
+	if (vmi_ops.set_pte) {
+		paravirt_ops.set_pte = vmi_set_pte;
+		paravirt_ops.set_pte_at = vmi_set_pte_at;
+		paravirt_ops.set_pmd = vmi_set_pmd;
 #ifdef CONFIG_X86_PAE
-	paravirt_ops.set_pte_atomic = vmi_set_pte_atomic;
-	paravirt_ops.set_pte_present = vmi_set_pte_present;
-	paravirt_ops.set_pud = vmi_set_pud;
-	paravirt_ops.pte_clear = vmi_pte_clear;
-	paravirt_ops.pmd_clear = vmi_pmd_clear;
+		paravirt_ops.set_pte_atomic = vmi_set_pte_atomic;
+		paravirt_ops.set_pte_present = vmi_set_pte_present;
+		paravirt_ops.set_pud = vmi_set_pud;
+		paravirt_ops.pte_clear = vmi_pte_clear;
+		paravirt_ops.pmd_clear = vmi_pmd_clear;
 #endif
+	}
+
+	if (vmi_ops.update_pte) {
+		paravirt_ops.pte_update = vmi_update_pte;
+		paravirt_ops.pte_update_defer = vmi_update_pte_defer;
+	}
+
+	vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
+	if (vmi_ops.allocate_page) {
+		paravirt_ops.alloc_pt = vmi_allocate_pt;
+		paravirt_ops.alloc_pd = vmi_allocate_pd;
+		paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone;
+	}
+
+	vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
+	if (vmi_ops.release_page) {
+		paravirt_ops.release_pt = vmi_release_pt;
+		paravirt_ops.release_pd = vmi_release_pd;
+	}
+	para_wrap(map_pt_hook, vmi_map_pt_hook, set_linear_mapping,
+		  SetLinearMapping);
+
 	/*
 	 * These MUST always be patched.  Don't support indirect jumps
 	 * through these operations, as the VMI interface may use either
@@ -847,21 +892,20 @@ static inline int __init activate_vmi(void)
 	paravirt_ops.iret = (void *)0xbadbab0;
 
 #ifdef CONFIG_SMP
-	paravirt_ops.startup_ipi_hook = vmi_startup_ipi_hook;
-	vmi_ops.set_initial_ap_state = vmi_get_function(VMI_CALL_SetInitialAPState);
+	para_wrap(startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState);
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	paravirt_ops.apic_read = vmi_get_function(VMI_CALL_APICRead);
-	paravirt_ops.apic_write = vmi_get_function(VMI_CALL_APICWrite);
-	paravirt_ops.apic_write_atomic = vmi_get_function(VMI_CALL_APICWrite);
+	para_fill(apic_read, APICRead);
+	para_fill(apic_write, APICWrite);
+	para_fill(apic_write_atomic, APICWrite);
 #endif
 
 	/*
 	 * Check for VMI timer functionality by probing for a cycle frequency method
 	 */
 	reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency);
-	if (rel->type != VMI_RELOCATION_NONE) {
+	if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) {
 		vmi_timer_ops.get_cycle_frequency = (void *)rel->eip;
 		vmi_timer_ops.get_cycle_counter =
 			vmi_get_function(VMI_CALL_GetCycleCounter);
@@ -879,9 +923,22 @@ static inline int __init activate_vmi(void)
 		paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm;
 		paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm;
 #endif
-		custom_sched_clock = vmi_sched_clock;
+		paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles;
+ 		paravirt_ops.get_cpu_khz = vmi_cpu_khz;
+
+		/* We have true wallclock functions; disable CMOS clock sync */
+		no_sync_cmos_clock = 1;
+	} else {
+		disable_noidle = 1;
+		disable_vmi_timer = 1;
 	}
 
+	/* No idle HZ mode only works if VMI timer and no idle is enabled */
+	if (disable_noidle || disable_vmi_timer)
+		para_fill(safe_halt, Halt);
+	else
+		para_wrap(safe_halt, vmi_safe_halt, halt, Halt);
+
 	/*
 	 * Alternative instruction rewriting doesn't happen soon enough
 	 * to convert VMI_IRET to a call instead of a jump; so we have
@@ -914,7 +971,9 @@ void __init vmi_init(void)
 
 	local_irq_save(flags);
 	activate_vmi();
-#ifdef CONFIG_SMP
+
+#ifdef CONFIG_X86_IO_APIC
+	/* This is virtual hardware; timer routing is wired correctly */
 	no_timer_check = 1;
 #endif
 	local_irq_restore(flags & X86_EFLAGS_IF);
@@ -925,9 +984,7 @@ static int __init parse_vmi(char *arg)
 	if (!arg)
 		return -EINVAL;
 
-	if (!strcmp(arg, "disable_nodelay"))
-		disable_nodelay = 1;
-	else if (!strcmp(arg, "disable_pge")) {
+	if (!strcmp(arg, "disable_pge")) {
 		clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
 		disable_pge = 1;
 	} else if (!strcmp(arg, "disable_pse")) {
@@ -942,7 +999,11 @@ static int __init parse_vmi(char *arg)
 	} else if (!strcmp(arg, "disable_mtrr")) {
 		clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability);
 		disable_mtrr = 1;
-	}
+	} else if (!strcmp(arg, "disable_timer")) {
+		disable_vmi_timer = 1;
+		disable_noidle = 1;
+	} else if (!strcmp(arg, "disable_noidle"))
+		disable_noidle = 1;
 	return 0;
 }
 
diff --git a/arch/i386/kernel/vmitime.c b/arch/i386/kernel/vmitime.c
index 76d2adcae5a3..9dfb17739b67 100644
--- a/arch/i386/kernel/vmitime.c
+++ b/arch/i386/kernel/vmitime.c
@@ -123,12 +123,10 @@ static struct clocksource clocksource_vmi = {
 static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id);
 
 static struct irqaction vmi_timer_irq  = {
-	vmi_timer_interrupt,
-	SA_INTERRUPT,
-	CPU_MASK_NONE,
-	"VMI-alarm",
-	NULL,
-	NULL
+	.handler = vmi_timer_interrupt,
+	.flags = IRQF_DISABLED,
+	.mask = CPU_MASK_NONE,
+	.name = "VMI-alarm",
 };
 
 /* Alarm rate */
@@ -153,13 +151,6 @@ static void vmi_get_wallclock_ts(struct timespec *ts)
 	ts->tv_sec = wallclock;
 }
 
-static void update_xtime_from_wallclock(void)
-{
-	struct timespec ts;
-	vmi_get_wallclock_ts(&ts);
-	do_settimeofday(&ts);
-}
-
 unsigned long vmi_get_wallclock(void)
 {
 	struct timespec ts;
@@ -172,11 +163,20 @@ int vmi_set_wallclock(unsigned long now)
 	return -1;
 }
 
-unsigned long long vmi_sched_clock(void)
+unsigned long long vmi_get_sched_cycles(void)
 {
 	return read_available_cycles();
 }
 
+unsigned long vmi_cpu_khz(void)
+{
+	unsigned long long khz;
+
+	khz = vmi_timer_ops.get_cycle_frequency();
+	(void)do_div(khz, 1000);
+	return khz;
+}
+
 void __init vmi_time_init(void)
 {
 	unsigned long long cycles_per_sec, cycles_per_msec;
@@ -188,25 +188,16 @@ void __init vmi_time_init(void)
 	set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt);
 #endif
 
-	no_sync_cmos_clock = 1;
-
-	vmi_get_wallclock_ts(&xtime);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
-
 	real_cycles_accounted_system = read_real_cycles();
-	update_xtime_from_wallclock();
 	per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles();
 
 	cycles_per_sec = vmi_timer_ops.get_cycle_frequency();
-
 	cycles_per_jiffy = cycles_per_sec;
 	(void)do_div(cycles_per_jiffy, HZ);
 	cycles_per_alarm = cycles_per_sec;
 	(void)do_div(cycles_per_alarm, alarm_hz);
 	cycles_per_msec = cycles_per_sec;
 	(void)do_div(cycles_per_msec, 1000);
-	cpu_khz = cycles_per_msec;
 
 	printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;"
 	       "cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy,
@@ -250,7 +241,7 @@ void __init vmi_timer_setup_boot_alarm(void)
 
 /* Initialize the time accounting variables for an AP on an SMP system.
  * Also, set the local alarm for the AP. */
-void __init vmi_timer_setup_secondary_alarm(void)
+void __devinit vmi_timer_setup_secondary_alarm(void)
 {
 	int cpu = smp_processor_id();
 
@@ -276,16 +267,13 @@ static void vmi_account_real_cycles(unsigned long long cur_real_cycles)
 
 	cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system;
 	while (cycles_not_accounted >= cycles_per_jiffy) {
-		/* systems wide jiffies and wallclock. */
+		/* systems wide jiffies. */
 		do_timer(1);
 
 		cycles_not_accounted -= cycles_per_jiffy;
 		real_cycles_accounted_system += cycles_per_jiffy;
 	}
 
-	if (vmi_timer_ops.wallclock_updated())
-		update_xtime_from_wallclock();
-
 	write_sequnlock(&xtime_lock);
 }
 
@@ -380,7 +368,6 @@ int vmi_stop_hz_timer(void)
 	unsigned long seq, next;
 	unsigned long long real_cycles_expiry;
 	int cpu = smp_processor_id();
-	int idle;
 
 	BUG_ON(!irqs_disabled());
 	if (sysctl_hz_timer != 0)
@@ -388,13 +375,13 @@ int vmi_stop_hz_timer(void)
 
 	cpu_set(cpu, nohz_cpu_mask);
 	smp_mb();
+
 	if (rcu_needs_cpu(cpu) || local_softirq_pending() ||
-	    (next = next_timer_interrupt(), time_before_eq(next, jiffies))) {
+	    (next = next_timer_interrupt(),
+	     time_before_eq(next, jiffies + HZ/CONFIG_VMI_ALARM_HZ))) {
 		cpu_clear(cpu, nohz_cpu_mask);
-		next = jiffies;
-		idle = 0;
-	} else
-		idle = 1;
+		return 0;
+	}
 
 	/* Convert jiffies to the real cycle counter. */
 	do {
@@ -404,17 +391,13 @@ int vmi_stop_hz_timer(void)
 	} while (read_seqretry(&xtime_lock, seq));
 
 	/* This cpu is going idle. Disable the periodic alarm. */
-	if (idle) {
-		vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE);
-		per_cpu(idle_start_jiffies, cpu) = jiffies;
-	}
-
+	vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE);
+	per_cpu(idle_start_jiffies, cpu) = jiffies;
 	/* Set the real time alarm to expire at the next event. */
 	vmi_timer_ops.set_alarm(
-		      VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL,
-		      real_cycles_expiry, 0);
-
-	return idle;
+		VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL,
+		real_cycles_expiry, 0);
+	return 1;
 }
 
 static void vmi_reenable_hz_timer(int cpu)
diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S
index ca51610955df..6f38f818380b 100644
--- a/arch/i386/kernel/vmlinux.lds.S
+++ b/arch/i386/kernel/vmlinux.lds.S
@@ -26,7 +26,7 @@ OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
 OUTPUT_ARCH(i386)
 ENTRY(phys_startup_32)
 jiffies = jiffies_64;
-_proxy_pda = 0;
+_proxy_pda = 1;
 
 PHDRS {
 	text PT_LOAD FLAGS(5);	/* R_E */
diff --git a/arch/i386/lib/Makefile b/arch/i386/lib/Makefile
index d86a548b8d54..22d8ac5815f0 100644
--- a/arch/i386/lib/Makefile
+++ b/arch/i386/lib/Makefile
@@ -7,3 +7,5 @@ lib-y = checksum.o delay.o usercopy.o getuser.o putuser.o memcpy.o strstr.o \
 	bitops.o semaphore.o
 
 lib-$(CONFIG_X86_USE_3DNOW) += mmx.o
+
+obj-$(CONFIG_SMP)	+= msr-on-cpu.o
diff --git a/arch/i386/lib/msr-on-cpu.c b/arch/i386/lib/msr-on-cpu.c
new file mode 100644
index 000000000000..1c46bda409ff
--- /dev/null
+++ b/arch/i386/lib/msr-on-cpu.c
@@ -0,0 +1,58 @@
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/smp.h>
+#include <asm/msr.h>
+
+struct msr_info {
+	u32 msr_no;
+	u32 l, h;
+};
+
+static void __rdmsr_on_cpu(void *info)
+{
+	struct msr_info *rv = info;
+
+	rdmsr(rv->msr_no, rv->l, rv->h);
+}
+
+void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+{
+	preempt_disable();
+	if (smp_processor_id() == cpu)
+		rdmsr(msr_no, *l, *h);
+	else {
+		struct msr_info rv;
+
+		rv.msr_no = msr_no;
+		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 0, 1);
+		*l = rv.l;
+		*h = rv.h;
+	}
+	preempt_enable();
+}
+
+static void __wrmsr_on_cpu(void *info)
+{
+	struct msr_info *rv = info;
+
+	wrmsr(rv->msr_no, rv->l, rv->h);
+}
+
+void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+{
+	preempt_disable();
+	if (smp_processor_id() == cpu)
+		wrmsr(msr_no, l, h);
+	else {
+		struct msr_info rv;
+
+		rv.msr_no = msr_no;
+		rv.l = l;
+		rv.h = h;
+		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 0, 1);
+	}
+	preempt_enable();
+}
+
+EXPORT_SYMBOL(rdmsr_on_cpu);
+EXPORT_SYMBOL(wrmsr_on_cpu);
diff --git a/arch/i386/lib/usercopy.c b/arch/i386/lib/usercopy.c
index d22cfc9d656c..086b3726862a 100644
--- a/arch/i386/lib/usercopy.c
+++ b/arch/i386/lib/usercopy.c
@@ -10,6 +10,7 @@
 #include <linux/blkdev.h>
 #include <linux/module.h>
 #include <linux/backing-dev.h>
+#include <linux/interrupt.h>
 #include <asm/uaccess.h>
 #include <asm/mmx.h>
 
@@ -719,6 +720,14 @@ unsigned long __copy_to_user_ll(void __user *to, const void *from,
 #ifndef CONFIG_X86_WP_WORKS_OK
 	if (unlikely(boot_cpu_data.wp_works_ok == 0) &&
 			((unsigned long )to) < TASK_SIZE) {
+		/*
+		 * When we are in an atomic section (see
+		 * mm/filemap.c:file_read_actor), return the full
+		 * length to take the slow path.
+		 */
+		if (in_atomic())
+			return n;
+
 		/* 
 		 * CPU does not honor the WP bit when writing
 		 * from supervisory mode, and due to preemption or SMP,
diff --git a/arch/i386/mm/highmem.c b/arch/i386/mm/highmem.c
index bb2de1089add..ac70d09df7ee 100644
--- a/arch/i386/mm/highmem.c
+++ b/arch/i386/mm/highmem.c
@@ -42,6 +42,7 @@ void *kmap_atomic(struct page *page, enum km_type type)
 
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	arch_flush_lazy_mmu_mode();
 
 	return (void*) vaddr;
 }
@@ -82,6 +83,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	arch_flush_lazy_mmu_mode();
 
 	return (void*) vaddr;
 }
diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c
index 3700eef78743..8fda7be9dd4d 100644
--- a/arch/i386/oprofile/nmi_int.c
+++ b/arch/i386/oprofile/nmi_int.c
@@ -63,7 +63,7 @@ static struct sys_device device_oprofile = {
 };
 
 
-static int __init init_driverfs(void)
+static int __init init_sysfs(void)
 {
 	int error;
 	if (!(error = sysdev_class_register(&oprofile_sysclass)))
@@ -72,15 +72,15 @@ static int __init init_driverfs(void)
 }
 
 
-static void exit_driverfs(void)
+static void exit_sysfs(void)
 {
 	sysdev_unregister(&device_oprofile);
 	sysdev_class_unregister(&oprofile_sysclass);
 }
 
 #else
-#define init_driverfs() do { } while (0)
-#define exit_driverfs() do { } while (0)
+#define init_sysfs() do { } while (0)
+#define exit_sysfs() do { } while (0)
 #endif /* CONFIG_PM */
 
 static int profile_exceptions_notify(struct notifier_block *self,
@@ -385,7 +385,7 @@ static int __init ppro_init(char ** cpu_type)
 	return 1;
 }
 
-/* in order to get driverfs right */
+/* in order to get sysfs right */
 static int using_nmi;
 
 int __init op_nmi_init(struct oprofile_operations *ops)
@@ -440,7 +440,7 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 			return -ENODEV;
 	}
 
-	init_driverfs();
+	init_sysfs();
 	using_nmi = 1;
 	ops->create_files = nmi_create_files;
 	ops->setup = nmi_setup;
@@ -456,5 +456,5 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 void op_nmi_exit(void)
 {
 	if (using_nmi)
-		exit_driverfs();
+		exit_sysfs();
 }
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 53ca6e897984..3f78d4d8ecf3 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -191,6 +191,102 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
 		},
 	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge R900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL20p G3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL20p G4",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL30p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL25p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL35p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL45p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL45p G2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL460c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL465c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL480c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL685c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
+		},
+	},
 	{}
 };
 
@@ -338,11 +434,13 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	if ((err = pcibios_enable_resources(dev, mask)) < 0)
 		return err;
 
-	return pcibios_enable_irq(dev);
+	if (!dev->msi_enabled)
+		return pcibios_enable_irq(dev);
+	return 0;
 }
 
 void pcibios_disable_device (struct pci_dev *dev)
 {
-	if (pcibios_disable_irq)
+	if (!dev->msi_enabled && pcibios_disable_irq)
 		pcibios_disable_irq(dev);
 }
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d51f0f11f7f9..e19185d26554 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -13,6 +13,7 @@ config IA64
 	bool
 	select PCI if (!IA64_HP_SIM)
 	select ACPI if (!IA64_HP_SIM)
+	select PM if (!IA64_HP_SIM)
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 9d1cffb57cde..a1446931b401 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,8 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 15:49:18 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar  8 11:07:09 2007
 #
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -18,16 +19,24 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -39,11 +48,9 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -54,7 +61,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -63,6 +69,8 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -82,15 +90,20 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
 CONFIG_MMU=y
 CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
+CONFIG_AUDIT_ARCH=y
 # CONFIG_IA64_GENERIC is not set
 CONFIG_IA64_DIG=y
 # CONFIG_IA64_HP_ZX1 is not set
@@ -107,6 +120,7 @@ CONFIG_PGTABLE_3=y
 # CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
@@ -116,9 +130,10 @@ CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_SCHED_SMT is not set
 CONFIG_PERMIT_BSP_REMOVE=y
 CONFIG_FORCE_CPEI_RETARGET=y
-# CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -128,10 +143,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA32_SUPPORT=y
@@ -139,6 +157,9 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_ESI is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
 
 #
 # Firmware Drivers
@@ -154,13 +175,16 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
 CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
@@ -181,8 +205,8 @@ CONFIG_ACPI_CONTAINER=m
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -212,6 +236,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -226,12 +254,21 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -257,7 +294,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -286,6 +322,8 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -329,11 +367,17 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -350,6 +394,7 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_BLK_DEV_IDEACPI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 
 #
@@ -376,8 +421,10 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -387,6 +434,7 @@ CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -398,6 +446,8 @@ CONFIG_IDEDMA_AUTO=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -417,14 +467,16 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -437,29 +489,36 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_FC=y
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -470,11 +529,11 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -563,6 +622,7 @@ CONFIG_E100=m
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -583,13 +643,18 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -631,6 +696,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -653,6 +719,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -682,6 +749,7 @@ CONFIG_GAMEPORT=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -689,12 +757,14 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
+# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 
 #
@@ -702,7 +772,8 @@ CONFIG_SERIAL_NONSTANDARD=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -734,10 +805,6 @@ CONFIG_EFI_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_AGP=m
 CONFIG_AGP_I460=m
 CONFIG_DRM=m
@@ -759,7 +826,6 @@ CONFIG_HPET_MMAP=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -782,16 +848,16 @@ CONFIG_HPET_MMAP=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
@@ -802,16 +868,19 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -820,10 +889,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -831,7 +907,6 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -842,9 +917,12 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
@@ -873,13 +951,13 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -888,15 +966,14 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -905,21 +982,13 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
@@ -937,17 +1006,23 @@ CONFIG_USB_HIDINPUT=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -965,15 +1040,55 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# EDAC - error detection and reporting (RAS)
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
 #
 
 #
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+# CONFIG_MSPEC is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -985,6 +1100,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -997,15 +1113,16 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -1038,12 +1155,13 @@ CONFIG_NTFS_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1078,7 +1196,7 @@ CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
@@ -1089,7 +1207,9 @@ CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1162,15 +1282,25 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
 
 #
 # Instrumentation Support
@@ -1182,21 +1312,31 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1215,7 +1355,11 @@ CONFIG_SYSVIPC_COMPAT=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1224,7 +1368,13 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1238,6 +1388,7 @@ CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 949dc4670a0c..1c7955c16358 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,8 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 15:55:36 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar  8 11:04:20 2007
 #
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -18,16 +19,24 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -39,11 +48,9 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -53,14 +60,16 @@ CONFIG_BASE_SMALL=0
 #
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
+CONFIG_STOP_MACHINE=y
 
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -80,15 +89,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
 CONFIG_MMU=y
-CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
+CONFIG_AUDIT_ARCH=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 CONFIG_IA64_HP_ZX1=y
@@ -105,6 +118,7 @@ CONFIG_PGTABLE_3=y
 # CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
@@ -113,8 +127,10 @@ CONFIG_IOSAPIC=y
 CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_SCHED_SMT is not set
+# CONFIG_PERMIT_BSP_REMOVE is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -124,11 +140,14 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA32_SUPPORT=y
@@ -136,6 +155,9 @@ CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_ESI is not set
+# CONFIG_KEXEC is not set
+CONFIG_CRASH_DUMP=y
 
 #
 # Firmware Drivers
@@ -151,21 +173,25 @@ CONFIG_BINFMT_MISC=y
 CONFIG_PM=y
 CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
 CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
 CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=y
 
 #
 # CPU Frequency scaling
@@ -177,8 +203,8 @@ CONFIG_ACPI_SYSTEM=y
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -208,6 +234,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -222,17 +252,26 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -240,14 +279,15 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
 # CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -272,7 +312,6 @@ CONFIG_NETFILTER=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -285,6 +324,7 @@ CONFIG_NETFILTER=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -301,6 +341,8 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -344,11 +386,17 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -365,6 +413,7 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 
 #
@@ -390,8 +439,10 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -401,6 +452,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -412,6 +464,8 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -431,14 +485,16 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -451,28 +507,36 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -562,6 +626,7 @@ CONFIG_E100=y
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -582,13 +647,18 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -628,6 +698,7 @@ CONFIG_TIGON3=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -666,6 +737,7 @@ CONFIG_SERIO=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -673,7 +745,8 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -705,10 +778,6 @@ CONFIG_EFI_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_AGP=y
 CONFIG_AGP_HP_ZX1=y
 CONFIG_DRM=y
@@ -727,7 +796,6 @@ CONFIG_DRM_RADEON=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -754,10 +822,11 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -776,9 +845,7 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -802,28 +869,31 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
 
 #
-# Video For Linux
+# Video Capture Adapters
 #
 
 #
-# Video Adapters
+# Video Capture Adapters
 #
 # CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
 # CONFIG_TUNER_3036 is not set
@@ -835,10 +905,27 @@ CONFIG_VIDEO_DEV=y
 # CONFIG_VIDEO_HEXIUM_ORION is not set
 # CONFIG_VIDEO_HEXIUM_GEMINI is not set
 # CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
 # CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
 # CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_AUDIO_DECODER is not set
-# CONFIG_VIDEO_DECODER is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
 
 #
 # Radio Adapters
@@ -846,22 +933,35 @@ CONFIG_VIDEO_DEV=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
+# CONFIG_USB_DSBR is not set
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -871,12 +971,13 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
 CONFIG_FB_RADEON_DEBUG=y
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
@@ -890,6 +991,7 @@ CONFIG_FB_RADEON_DEBUG=y
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
@@ -904,7 +1006,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -924,9 +1025,11 @@ CONFIG_SND_SEQUENCER=y
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -936,7 +1039,6 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_MPU401_UART=y
 CONFIG_SND_OPL3_LIB=y
 CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
@@ -947,6 +1049,7 @@ CONFIG_SND_AC97_BUS=y
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -959,6 +1062,18 @@ CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -966,7 +1081,7 @@ CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
 CONFIG_SND_FM801=y
-CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_FM801_TEA575X_BOOL is not set
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
@@ -979,6 +1094,7 @@ CONFIG_SND_FM801_TEA575X=y
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -988,6 +1104,7 @@ CONFIG_SND_FM801_TEA575X=y
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
 
 #
 # USB devices
@@ -995,15 +1112,28 @@ CONFIG_SND_FM801_TEA575X=y
 # CONFIG_SND_USB_AUDIO is not set
 
 #
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1011,7 +1141,6 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_BANDWIDTH=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -1022,9 +1151,12 @@ CONFIG_USB_BANDWIDTH=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
@@ -1032,7 +1164,6 @@ CONFIG_USB_UHCI_HCD=y
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -1054,13 +1185,13 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
@@ -1069,15 +1200,14 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1086,27 +1216,13 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1124,17 +1240,23 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
 # USB DSL modem support
@@ -1151,13 +1273,53 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# EDAC - error detection and reporting (RAS)
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+# CONFIG_MSPEC is not set
 
 #
 # File systems
@@ -1171,6 +1333,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1178,6 +1341,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1212,12 +1376,14 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1331,15 +1497,25 @@ CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
 
 #
 # Instrumentation Support
@@ -1351,21 +1527,32 @@ CONFIG_KPROBES=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 CONFIG_IA64_PRINT_HAZARDS=y
@@ -1384,7 +1571,11 @@ CONFIG_SYSVIPC_COMPAT=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1393,7 +1584,13 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1407,6 +1604,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 9001b3fbaa32..153bfdc0182d 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,8 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 16:02:28 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar  8 11:01:03 2007
 #
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -18,16 +19,24 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -39,11 +48,9 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -54,7 +61,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -63,6 +69,8 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -82,15 +90,20 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_IA64=y
 CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
 CONFIG_MMU=y
 CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
+CONFIG_AUDIT_ARCH=y
 CONFIG_IA64_GENERIC=y
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
@@ -107,6 +120,7 @@ CONFIG_PGTABLE_3=y
 # CONFIG_PGTABLE_4 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
@@ -116,9 +130,10 @@ CONFIG_IOSAPIC=y
 CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
-CONFIG_IA64_NR_NODES=256
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_SCHED_SMT is not set
+# CONFIG_PERMIT_BSP_REMOVE is not set
 # CONFIG_PREEMPT is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
@@ -130,21 +145,34 @@ CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=10
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
 CONFIG_IA64_MCA_RECOVERY=y
 CONFIG_PERFMON=y
 CONFIG_IA64_PALINFO=y
 CONFIG_SGI_SN=y
+# CONFIG_IA64_ESI is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC3=m
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
 
 #
 # Firmware Drivers
@@ -160,13 +188,16 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
 CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=m
@@ -188,8 +219,8 @@ CONFIG_ACPI_CONTAINER=m
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -220,6 +251,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -234,12 +269,21 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -265,7 +309,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -294,6 +337,8 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -337,11 +382,17 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -358,6 +409,7 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_BLK_DEV_IDEACPI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 
 #
@@ -384,8 +436,10 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -396,6 +450,7 @@ CONFIG_BLK_DEV_SGIIOC4=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -407,6 +462,8 @@ CONFIG_IDEDMA_AUTO=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -426,14 +483,16 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -446,43 +505,36 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -493,11 +545,11 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -587,6 +639,7 @@ CONFIG_E100=m
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -607,13 +660,18 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -655,6 +713,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -677,6 +736,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -706,6 +766,7 @@ CONFIG_GAMEPORT=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -713,12 +774,14 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
+# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
 CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
@@ -729,7 +792,8 @@ CONFIG_SGI_MBCS=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -764,10 +828,6 @@ CONFIG_EFI_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_AGP=m
 CONFIG_AGP_I460=m
 CONFIG_AGP_HP_ZX1=m
@@ -792,7 +852,6 @@ CONFIG_MMTIMER=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -815,16 +874,16 @@ CONFIG_MMTIMER=y
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
@@ -835,16 +894,19 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -865,9 +927,11 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
 
@@ -877,7 +941,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
@@ -888,6 +951,7 @@ CONFIG_SND_MPU401=m
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -901,6 +965,18 @@ CONFIG_SND_MPU401=m
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 CONFIG_SND_EMU10K1=m
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -908,7 +984,7 @@ CONFIG_SND_EMU10K1=m
 # CONFIG_SND_ES1938 is not set
 # CONFIG_SND_ES1968 is not set
 CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_FM801_TEA575X_BOOL is not set
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
@@ -921,6 +997,7 @@ CONFIG_SND_FM801=m
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -930,6 +1007,7 @@ CONFIG_SND_FM801=m
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
 
 #
 # USB devices
@@ -937,15 +1015,28 @@ CONFIG_SND_FM801=m
 # CONFIG_SND_USB_AUDIO is not set
 
 #
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -953,7 +1044,6 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -964,9 +1054,12 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
@@ -974,7 +1067,6 @@ CONFIG_USB_UHCI_HCD=m
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -996,13 +1088,13 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -1017,15 +1109,14 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1034,21 +1125,13 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1066,17 +1149,23 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1094,26 +1183,65 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_AMSO1100 is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 # CONFIG_INFINIBAND_SRP is not set
+# CONFIG_INFINIBAND_ISER is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
 #
-CONFIG_SGI_IOC4=y
-CONFIG_SGI_IOC3=m
 
 #
-# EDAC - error detection and reporting (RAS)
+# Virtualization
 #
+# CONFIG_MSPEC is not set
 
 #
 # File systems
@@ -1127,6 +1255,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1139,15 +1268,16 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -1180,12 +1310,14 @@ CONFIG_NTFS_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1220,7 +1352,7 @@ CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
@@ -1231,7 +1363,9 @@ CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 # CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1304,15 +1438,25 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
 
 #
 # HP Simulator drivers
@@ -1331,21 +1475,31 @@ CONFIG_GENERIC_PENDING_IRQ=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=20
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1364,7 +1518,11 @@ CONFIG_SYSVIPC_COMPAT=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1373,7 +1531,13 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1387,6 +1551,7 @@ CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index 424e9257c9a0..f26077a773d5 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -427,7 +427,6 @@ make_new_skb(struct net_device *dev)
 		printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name);
 		return NULL;
 	}
-	nskb->dev = dev;
 
 	skb_reserve(nskb, 2);	/* Align IP on 16 byte boundaries */
 
@@ -474,7 +473,7 @@ simeth_rx(struct net_device *dev)
 		 * XXX Fix me
 		 * Should really do a csum+copy here
 		 */
-		memcpy(skb->data, frame, len);
+		skb_copy_to_linear_data(skb, frame, len);
 #endif
 		skb->protocol = eth_type_trans(skb, dev);
 
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index d430d36ae49d..0afb4fe7c35b 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1267,6 +1267,10 @@ sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned i
 	struct getdents32_callback buf;
 	int error;
 
+	error = -EFAULT;
+	if (!access_ok(VERIFY_WRITE, dirent, count))
+		goto out;
+
 	error = -EBADF;
 	file = fget(fd);
 	if (!file)
@@ -1283,10 +1287,10 @@ sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned i
 	error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
-		error = -EINVAL;
 		if (put_user(file->f_pos, &lastdirent->d_off))
-			goto out_putf;
-		error = count - buf.count;
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
 
 out_putf:
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 9197d7b361b3..3549c94467b8 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -651,7 +651,7 @@ int __init acpi_boot_init(void)
 	 * information -- the successor to MPS tables.
 	 */
 
-	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt) < 1) {
+	if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
 		printk(KERN_ERR PREFIX "Can't find MADT\n");
 		goto skip_madt;
 	}
@@ -702,7 +702,7 @@ int __init acpi_boot_init(void)
 	 * gets interrupts such as power and sleep buttons.  If it's not
 	 * on a Legacy interrupt, it needs to be setup.
 	 */
-	if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt) < 1)
+	if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
 		printk(KERN_ERR PREFIX "Can't find FADT\n");
 
 #ifdef CONFIG_SMP
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 75a2a2c12258..2236fabbb3c6 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -35,6 +35,7 @@ void foo(void)
 	BLANK();
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 
 	BLANK();
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 5cdd2f5fa064..80a94e707827 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -21,9 +21,9 @@
 #include <asm/mca.h>
 
 int kdump_status[NR_CPUS];
-atomic_t kdump_cpu_freezed;
+static atomic_t kdump_cpu_frozen;
 atomic_t kdump_in_progress;
-int kdump_on_init = 1;
+static int kdump_on_init = 1;
 
 static inline Elf64_Word
 *append_elf_note(Elf64_Word *buf, char *name, unsigned type, void *data,
@@ -86,7 +86,7 @@ kdump_wait_cpu_freeze(void)
 	int cpu_num = num_online_cpus() - 1;
 	int timeout = 1000;
 	while(timeout-- > 0) {
-		if (atomic_read(&kdump_cpu_freezed) == cpu_num)
+		if (atomic_read(&kdump_cpu_frozen) == cpu_num)
 			return 0;
 		udelay(1000);
 	}
@@ -108,8 +108,8 @@ machine_crash_shutdown(struct pt_regs *pt)
 	kexec_disable_iosapic();
 #ifdef CONFIG_SMP
 	kdump_smp_send_stop();
+	/* not all cpu response to IPI, send INIT to freeze them */
 	if (kdump_wait_cpu_freeze() && kdump_on_init) 	{
-		//not all cpu response to IPI, send INIT to freeze them
 		kdump_smp_send_init();
 	}
 #endif
@@ -136,7 +136,7 @@ kdump_cpu_freeze(struct unw_frame_info *info, void *arg)
 	cpuid = smp_processor_id();
 	crash_save_this_cpu();
 	current->thread.ksp = (__u64)info->sw - 16;
-	atomic_inc(&kdump_cpu_freezed);
+	atomic_inc(&kdump_cpu_frozen);
 	kdump_status[cpuid] = 1;
 	mb();
 #ifdef CONFIG_HOTPLUG_CPU
@@ -164,7 +164,7 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 
 	nd = (struct ia64_mca_notify_die *)args->err;
 	/* Reason code 1 means machine check rendezous*/
-	if ((val == DIE_INIT_MONARCH_ENTER || DIE_INIT_SLAVE_ENTER) &&
+	if ((val == DIE_INIT_MONARCH_ENTER || val == DIE_INIT_SLAVE_ENTER) &&
 		 nd->sos->rv_rc == 1)
 		return NOTIFY_DONE;
 
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 772ba6fe110f..f45f91d38cab 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -21,6 +21,7 @@
  *	Skip non-WB memory and ignore empty memory ranges.
  */
 #include <linux/module.h>
+#include <linux/bootmem.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
@@ -970,6 +971,11 @@ efi_memmap_init(unsigned long *s, unsigned long *e)
 		if (!is_memory_available(md))
 			continue;
 
+#ifdef CONFIG_CRASH_DUMP
+		/* saved_max_pfn should ignore max_addr= command line arg */
+		if (saved_max_pfn < (efi_md_end(md) >> PAGE_SHIFT))
+			saved_max_pfn = (efi_md_end(md) >> PAGE_SHIFT);
+#endif
 		/*
 		 * Round ends inward to granule boundaries
 		 * Give trimmings to uncached allocator
@@ -1136,7 +1142,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 /* find a block of memory aligned to 64M exclude reserved regions
    rsvd_regions are sorted
  */
-unsigned long
+unsigned long __init
 kdump_find_rsvd_region (unsigned long size,
 		struct rsvd_region *r, int n)
 {
@@ -1177,3 +1183,33 @@ kdump_find_rsvd_region (unsigned long size,
   return ~0UL;
 }
 #endif
+
+#ifdef CONFIG_PROC_VMCORE
+/* locate the size find a the descriptor at a certain address */
+unsigned long
+vmcore_find_descriptor_size (unsigned long address)
+{
+	void *efi_map_start, *efi_map_end, *p;
+	efi_memory_desc_t *md;
+	u64 efi_desc_size;
+	unsigned long ret = 0;
+
+	efi_map_start = __va(ia64_boot_param->efi_memmap);
+	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
+	efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+	for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+		md = p;
+		if (efi_wb(md) && md->type == EFI_LOADER_DATA
+		    && md->phys_addr == address) {
+			ret = efi_md_size(md);
+			break;
+		}
+	}
+
+	if (ret == 0)
+		printk(KERN_WARNING "Cannot locate EFI vmcore descriptor\n");
+
+	return ret;
+}
+#endif
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 7a05b1cb2ad5..8589e84a27c6 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -10,6 +10,8 @@
  *			probably broke it along the way... ;-)
  * 13-Jul-04 clameter   Implement fsys_clock_gettime and revise fsys_gettimeofday to make
  *                      it capable of using memory based clocks without falling back to C code.
+ * 08-Feb-07 Fenghua Yu Implement fsys_getcpu.
+ *
  */
 
 #include <asm/asmmacro.h>
@@ -505,6 +507,59 @@ EX(.fail_efault, (p15) st8 [r34]=r3)
 #endif
 END(fsys_rt_sigprocmask)
 
+/*
+ * fsys_getcpu doesn't use the third parameter in this implementation. It reads
+ * current_thread_info()->cpu and corresponding node in cpu_to_node_map.
+ */
+ENTRY(fsys_getcpu)
+	.prologue
+	.altrp b6
+	.body
+	;;
+	add r2=TI_FLAGS+IA64_TASK_SIZE,r16
+	tnat.nz p6,p0 = r32			// guard against NaT argument
+	add r3=TI_CPU+IA64_TASK_SIZE,r16
+	;;
+	ld4 r3=[r3]				// M r3 = thread_info->cpu
+	ld4 r2=[r2]				// M r2 = thread_info->flags
+(p6)    br.cond.spnt.few .fail_einval		// B
+	;;
+	tnat.nz p7,p0 = r33			// I guard against NaT argument
+(p7)    br.cond.spnt.few .fail_einval		// B
+#ifdef CONFIG_NUMA
+	movl r17=cpu_to_node_map
+	;;
+EX(.fail_efault, probe.w.fault r32, 3)		// M This takes 5 cycles
+EX(.fail_efault, probe.w.fault r33, 3)		// M This takes 5 cycles
+	shladd r18=r3,1,r17
+	;;
+	ld2 r20=[r18]				// r20 = cpu_to_node_map[cpu]
+	and r2 = TIF_ALLWORK_MASK,r2
+	;;
+	cmp.ne p8,p0=0,r2
+(p8)	br.spnt.many fsys_fallback_syscall
+	;;
+	;;
+EX(.fail_efault, st4 [r32] = r3)
+EX(.fail_efault, st2 [r33] = r20)
+	mov r8=0
+	;;
+#else
+EX(.fail_efault, probe.w.fault r32, 3)		// M This takes 5 cycles
+EX(.fail_efault, probe.w.fault r33, 3)		// M This takes 5 cycles
+	and r2 = TIF_ALLWORK_MASK,r2
+	;;
+	cmp.ne p8,p0=0,r2
+(p8)	br.spnt.many fsys_fallback_syscall
+	;;
+EX(.fail_efault, st4 [r32] = r3)
+EX(.fail_efault, st2 [r33] = r0)
+	mov r8=0
+	;;
+#endif
+	FSYS_RETURN
+END(fsys_getcpu)
+
 ENTRY(fsys_fallback_syscall)
 	.prologue
 	.altrp b6
@@ -878,6 +933,56 @@ fsyscall_table:
 	data8 0				// timer_delete
 	data8 0				// clock_settime
 	data8 fsys_clock_gettime	// clock_gettime
+	data8 0				// clock_getres		// 1255
+	data8 0				// clock_nanosleep
+	data8 0				// fstatfs64
+	data8 0				// statfs64
+	data8 0				// mbind
+	data8 0				// get_mempolicy	// 1260
+	data8 0				// set_mempolicy
+	data8 0				// mq_open
+	data8 0				// mq_unlink
+	data8 0				// mq_timedsend
+	data8 0				// mq_timedreceive	// 1265
+	data8 0				// mq_notify
+	data8 0				// mq_getsetattr
+	data8 0				// kexec_load
+	data8 0				// vserver
+	data8 0				// waitid		// 1270
+	data8 0				// add_key
+	data8 0				// request_key
+	data8 0				// keyctl
+	data8 0				// ioprio_set
+	data8 0				// ioprio_get		// 1275
+	data8 0				// move_pages
+	data8 0				// inotify_init
+	data8 0				// inotify_add_watch
+	data8 0				// inotify_rm_watch
+	data8 0				// migrate_pages	// 1280
+	data8 0				// openat
+	data8 0				// mkdirat
+	data8 0				// mknodat
+	data8 0				// fchownat
+	data8 0				// futimesat		// 1285
+	data8 0				// newfstatat
+	data8 0				// unlinkat
+	data8 0				// renameat
+	data8 0				// linkat
+	data8 0				// symlinkat		// 1290
+	data8 0				// readlinkat
+	data8 0				// fchmodat
+	data8 0				// faccessat
+	data8 0
+	data8 0							// 1295
+	data8 0				// unshare
+	data8 0				// splice
+	data8 0				// set_robust_list
+	data8 0				// get_robust_list
+	data8 0				// sync_file_range	// 1300
+	data8 0				// tee
+	data8 0				// vmsplice
+	data8 0
+	data8 fsys_getcpu		// getcpu		// 1304
 
 	// fill in zeros for the remaining entries
 	.zero:
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index d6aab40c6416..dcfbf3e7a9ef 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -446,7 +446,7 @@ iosapic_end_level_irq (unsigned int irq)
 #define iosapic_disable_level_irq	mask_irq
 #define iosapic_ack_level_irq		nop
 
-struct hw_interrupt_type irq_type_iosapic_level = {
+struct irq_chip irq_type_iosapic_level = {
 	.name =		"IO-SAPIC-level",
 	.startup =	iosapic_startup_level_irq,
 	.shutdown =	iosapic_shutdown_level_irq,
@@ -454,6 +454,8 @@ struct hw_interrupt_type irq_type_iosapic_level = {
 	.disable =	iosapic_disable_level_irq,
 	.ack =		iosapic_ack_level_irq,
 	.end =		iosapic_end_level_irq,
+	.mask =		mask_irq,
+	.unmask =	unmask_irq,
 	.set_affinity =	iosapic_set_affinity
 };
 
@@ -493,7 +495,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 #define iosapic_disable_edge_irq	nop
 #define iosapic_end_edge_irq		nop
 
-struct hw_interrupt_type irq_type_iosapic_edge = {
+struct irq_chip irq_type_iosapic_edge = {
 	.name =		"IO-SAPIC-edge",
 	.startup =	iosapic_startup_edge_irq,
 	.shutdown =	iosapic_disable_edge_irq,
@@ -501,6 +503,8 @@ struct hw_interrupt_type irq_type_iosapic_edge = {
 	.disable =	iosapic_disable_edge_irq,
 	.ack =		iosapic_ack_edge_irq,
 	.end =		iosapic_end_edge_irq,
+	.mask =		mask_irq,
+	.unmask =	unmask_irq,
 	.set_affinity =	iosapic_set_affinity
 };
 
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index a76add3e76a2..491687f84fb5 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1192,8 +1192,6 @@ void
 ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 		 struct ia64_sal_os_state *sos)
 {
-	pal_processor_state_info_t *psp = (pal_processor_state_info_t *)
-		&sos->proc_state_param;
 	int recover, cpu = smp_processor_id();
 	struct task_struct *previous_current;
 	struct ia64_mca_notify_die nd =
@@ -1223,10 +1221,8 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	/* Get the MCA error record and log it */
 	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA);
 
-	/* TLB error is only exist in this SAL error record */
-	recover = (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc))
-	/* other error recovery */
-	   || (ia64_mca_ucmc_extension
+	/* MCA error recovery */
+	recover = (ia64_mca_ucmc_extension
 		&& ia64_mca_ucmc_extension(
 			IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA),
 			sos));
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index afc1403799c9..832cf1e647e8 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -602,11 +602,40 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx,
 		default:
 			break;
 		}
+	} else if (psp->cc && !psp->bc) {	/* Cache error */
+		status = recover_from_read_error(slidx, peidx, pbci, sos);
 	}
 
 	return status;
 }
 
+/*
+ * recover_from_tlb_check
+ * @peidx:	pointer of index of processor error section
+ *
+ * Return value:
+ *	1 on Success / 0 on Failure
+ */
+static int
+recover_from_tlb_check(peidx_table_t *peidx)
+{
+	sal_log_mod_error_info_t *smei;
+	pal_tlb_check_info_t *ptci;
+
+	smei = (sal_log_mod_error_info_t *)peidx_tlb_check(peidx, 0);
+	ptci = (pal_tlb_check_info_t *)&(smei->check_info);
+
+	/*
+	 * Look for signature of a duplicate TLB DTC entry, which is
+	 * a SW bug and always fatal.
+	 */
+	if (ptci->op == PAL_TLB_CHECK_OP_PURGE
+	    && !(ptci->itr || ptci->dtc || ptci->itc))
+		return fatal_mca("Duplicate TLB entry");
+
+	return mca_recovered("TLB check recovered");
+}
+
 /**
  * recover_from_processor_error
  * @platform:	whether there are some platform error section or not
@@ -618,13 +647,6 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx,
  * Return value:
  *	1 on Success / 0 on Failure
  */
-/*
- *  Later we try to recover when below all conditions are satisfied.
- *   1. Only one processor error section is exist.
- *   2. BUS_CHECK is exist and the others are not exist.(Except TLB_CHECK)
- *   3. The entry of BUS_CHECK_INFO is 1.
- *   4. "External bus error" flag is set and the others are not set.
- */
 
 static int
 recover_from_processor_error(int platform, slidx_table_t *slidx,
@@ -652,38 +674,39 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 		return fatal_mca("error not contained");
 
 	/*
+	 * Look for recoverable TLB check
+	 */
+	if (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc))
+		return recover_from_tlb_check(peidx);
+
+	/*
 	 * The cache check and bus check bits have four possible states
 	 *   cc bc
-	 *    0  0	Weird record, not recovered
-	 *    1  0	Cache error, not recovered
-	 *    0  1	I/O error, attempt recovery
 	 *    1  1	Memory error, attempt recovery
+	 *    1  0	Cache error, attempt recovery
+	 *    0  1	I/O error, attempt recovery
+	 *    0  0	Other error type, not recovered
 	 */
-	if (psp->bc == 0 || pbci == NULL)
-		return fatal_mca("No bus check");
+	if (psp->cc == 0 && (psp->bc == 0 || pbci == NULL))
+		return fatal_mca("No cache or bus check");
 
 	/*
-	 * Sorry, we cannot handle so many.
+	 * Cannot handle more than one bus check.
 	 */
 	if (peidx_bus_check_num(peidx) > 1)
 		return fatal_mca("Too many bus checks");
-	/*
-	 * Well, here is only one bus error.
-	 */
+
 	if (pbci->ib)
 		return fatal_mca("Internal Bus error");
-	if (pbci->cc)
-		return fatal_mca("Cache-cache error");
 	if (pbci->eb && pbci->bsi > 0)
 		return fatal_mca("External bus check fatal status");
 
 	/*
-	 * This is a local MCA and estimated as recoverble external bus error.
-	 * (e.g. a load from poisoned memory)
-	 * This means "there are some platform errors".
+	 * This is a local MCA and estimated as a recoverble error.
 	 */
 	if (platform)
 		return recover_from_platform_error(slidx, peidx, pbci, sos);
+
 	/*
 	 * On account of strange SAL error record, we cannot recover.
 	 */
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 0d05450c91c4..c81080df70df 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -60,7 +60,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask)
 	msg.address_lo = addr;
 
 	write_msi_msg(irq, &msg);
-	set_native_irq_info(irq, cpu_mask);
+	irq_desc[irq].affinity = cpu_mask;
 }
 #endif /* CONFIG_SMP */
 
@@ -68,7 +68,7 @@ int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct msi_msg	msg;
 	unsigned long	dest_phys_id;
-	unsigned int	irq, vector;
+	int	irq, vector;
 
 	irq = create_irq();
 	if (irq < 0)
@@ -76,7 +76,7 @@ int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 
 	set_irq_msi(irq, desc);
 	dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map));
-	vector = irq;
+	vector = irq_to_vector(irq);
 
 	msg.address_hi = 0;
 	msg.address_lo =
@@ -110,7 +110,7 @@ static void ia64_ack_msi_irq(unsigned int irq)
 
 static int ia64_msi_retrigger_irq(unsigned int irq)
 {
-	unsigned int vector = irq;
+	unsigned int vector = irq_to_vector(irq);
 	ia64_resend_irq(vector);
 
 	return 1;
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 2ecb20b551e1..abc7ad035886 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -147,7 +147,7 @@
  * in UP:
  * 	- we need to protect against PMU overflow interrupts (local_irq_disable)
  *
- * spin_lock_irqsave()/spin_lock_irqrestore():
+ * spin_lock_irqsave()/spin_unlock_irqrestore():
  * 	in SMP: local_irq_disable + spin_lock
  * 	in UP : local_irq_disable
  *
@@ -2299,7 +2299,7 @@ pfm_remap_buffer(struct vm_area_struct *vma, unsigned long buf, unsigned long ad
  * allocate a sampling buffer and remaps it into the user address space of the task
  */
 static int
-pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned long rsize, void **user_vaddr)
+pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t *ctx, unsigned long rsize, void **user_vaddr)
 {
 	struct mm_struct *mm = task->mm;
 	struct vm_area_struct *vma = NULL;
@@ -2349,6 +2349,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned lon
 	 * partially initialize the vma for the sampling buffer
 	 */
 	vma->vm_mm	     = mm;
+	vma->vm_file	     = filp;
 	vma->vm_flags	     = VM_READ| VM_MAYREAD |VM_RESERVED;
 	vma->vm_page_prot    = PAGE_READONLY; /* XXX may need to change */
 
@@ -2387,6 +2388,8 @@ pfm_smpl_buffer_alloc(struct task_struct *task, pfm_context_t *ctx, unsigned lon
 		goto error;
 	}
 
+	get_file(filp);
+
 	/*
 	 * now insert the vma in the vm list for the process, must be
 	 * done with mmap lock held
@@ -2464,7 +2467,7 @@ pfarg_is_sane(struct task_struct *task, pfarg_context_t *pfx)
 }
 
 static int
-pfm_setup_buffer_fmt(struct task_struct *task, pfm_context_t *ctx, unsigned int ctx_flags,
+pfm_setup_buffer_fmt(struct task_struct *task, struct file *filp, pfm_context_t *ctx, unsigned int ctx_flags,
 		     unsigned int cpu, pfarg_context_t *arg)
 {
 	pfm_buffer_fmt_t *fmt = NULL;
@@ -2505,7 +2508,7 @@ pfm_setup_buffer_fmt(struct task_struct *task, pfm_context_t *ctx, unsigned int
 		/*
 		 * buffer is always remapped into the caller's address space
 		 */
-		ret = pfm_smpl_buffer_alloc(current, ctx, size, &uaddr);
+		ret = pfm_smpl_buffer_alloc(current, filp, ctx, size, &uaddr);
 		if (ret) goto error;
 
 		/* keep track of user address of buffer */
@@ -2716,7 +2719,7 @@ pfm_context_create(pfm_context_t *ctx, void *arg, int count, struct pt_regs *reg
 	 * does the user want to sample?
 	 */
 	if (pfm_uuid_cmp(req->ctx_smpl_buf_id, pfm_null_uuid)) {
-		ret = pfm_setup_buffer_fmt(current, ctx, ctx_flags, 0, req);
+		ret = pfm_setup_buffer_fmt(current, filp, ctx, ctx_flags, 0, req);
 		if (ret) goto buffer_error;
 	}
 
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 3f8918782e0c..00f803246948 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -1573,6 +1573,7 @@ sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data)
 
 	      case PTRACE_DETACH:
 		/* detach a process that was attached. */
+		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		ret = ptrace_detach(child, data);
 		goto out_tsk;
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5fa09d141ab7..dc7dd7648ec5 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -91,8 +91,6 @@ static struct resource code_resource = {
 	.name	= "Kernel code",
 	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
 };
-extern void efi_initialize_iomem_resources(struct resource *,
-		struct resource *);
 extern char _text[], _end[], _etext[];
 
 unsigned long ia64_max_cacheline_size;
@@ -251,6 +249,12 @@ reserve_memory (void)
 	}
 #endif
 
+#ifdef CONFIG_PROC_VMCORE
+	if (reserve_elfcorehdr(&rsvd_region[n].start,
+			       &rsvd_region[n].end) == 0)
+		n++;
+#endif
+
 	efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
 	n++;
 
@@ -453,6 +457,30 @@ static int __init parse_elfcorehdr(char *arg)
 	return 0;
 }
 early_param("elfcorehdr", parse_elfcorehdr);
+
+int __init reserve_elfcorehdr(unsigned long *start, unsigned long *end)
+{
+	unsigned long length;
+
+	/* We get the address using the kernel command line,
+	 * but the size is extracted from the EFI tables.
+	 * Both address and size are required for reservation
+	 * to work properly.
+	 */
+
+	if (elfcorehdr_addr >= ELFCORE_ADDR_MAX)
+		return -EINVAL;
+
+	if ((length = vmcore_find_descriptor_size(elfcorehdr_addr)) == 0) {
+		elfcorehdr_addr = ELFCORE_ADDR_MAX;
+		return -EINVAL;
+	}
+
+	*start = (unsigned long)__va(elfcorehdr_addr);
+	*end = *start + length;
+	return 0;
+}
+
 #endif /* CONFIG_PROC_VMCORE */
 
 void __init
@@ -612,7 +640,7 @@ show_cpuinfo (struct seq_file *m, void *v)
 		   "features   : %s\n"
 		   "cpu number : %lu\n"
 		   "cpu regs   : %u\n"
-		   "cpu MHz    : %lu.%06lu\n"
+		   "cpu MHz    : %lu.%03lu\n"
 		   "itc MHz    : %lu.%06lu\n"
 		   "BogoMIPS   : %lu.%02lu\n",
 		   cpunum, c->vendor, c->family, c->model,
@@ -664,12 +692,15 @@ struct seq_operations cpuinfo_op = {
 	.show =		show_cpuinfo
 };
 
-static char brandname[128];
+#define MAX_BRANDS	8
+static char brandname[MAX_BRANDS][128];
 
 static char * __cpuinit
 get_model_name(__u8 family, __u8 model)
 {
+	static int overflow;
 	char brand[128];
+	int i;
 
 	memcpy(brand, "Unknown", 8);
 	if (ia64_pal_get_brand_info(brand)) {
@@ -681,12 +712,17 @@ get_model_name(__u8 family, __u8 model)
 			case 2: memcpy(brand, "Madison up to 9M cache", 23); break;
 		}
 	}
-	if (brandname[0] == '\0')
-		return strcpy(brandname, brand);
-	else if (strcmp(brandname, brand) == 0)
-		return brandname;
-	else
-		return kstrdup(brand, GFP_KERNEL);
+	for (i = 0; i < MAX_BRANDS; i++)
+		if (strcmp(brandname[i], brand) == 0)
+			return brandname[i];
+	for (i = 0; i < MAX_BRANDS; i++)
+		if (brandname[i][0] == '\0')
+			return strcpy(brandname[i], brand);
+	if (overflow++ == 0)
+		printk(KERN_ERR
+		       "%s: Table overflow. Some processor model information will be missing\n",
+		       __FUNCTION__);
+	return "Unknown";
 }
 
 static void __cpuinit
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index b21ddecea943..ff7df439da6d 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -375,6 +375,7 @@ static void __devinit
 smp_callin (void)
 {
 	int cpuid, phys_id, itc_master;
+	struct cpuinfo_ia64 *last_cpuinfo, *this_cpuinfo;
 	extern void ia64_init_itm(void);
 	extern volatile int time_keeper_id;
 
@@ -424,7 +425,21 @@ smp_callin (void)
 	 * Get our bogomips.
 	 */
 	ia64_init_itm();
-	calibrate_delay();
+
+	/*
+	 * Delay calibration can be skipped if new processor is identical to the
+	 * previous processor.
+	 */
+	last_cpuinfo = cpu_data(cpuid - 1);
+	this_cpuinfo = local_cpu_data;
+	if (last_cpuinfo->itc_freq != this_cpuinfo->itc_freq ||
+	    last_cpuinfo->proc_freq != this_cpuinfo->proc_freq ||
+	    last_cpuinfo->features != this_cpuinfo->features ||
+	    last_cpuinfo->revision != this_cpuinfo->revision ||
+	    last_cpuinfo->family != this_cpuinfo->family ||
+	    last_cpuinfo->archrev != this_cpuinfo->archrev ||
+	    last_cpuinfo->model != this_cpuinfo->model)
+		calibrate_delay();
 	local_cpu_data->loops_per_jiffy = loops_per_jiffy;
 
 #ifdef CONFIG_IA32_SUPPORT
diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile
index 38fa6e49e791..46edf8444c7e 100644
--- a/arch/ia64/lib/Makefile
+++ b/arch/ia64/lib/Makefile
@@ -9,12 +9,11 @@ lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	checksum.o clear_page.o csum_partial_copy.o			\
 	clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o	\
 	flush.o ip_fast_csum.o do_csum.o				\
-	memset.o strlen.o
+	memset.o strlen.o xor.o
 
 lib-$(CONFIG_ITANIUM)	+= copy_page.o copy_user.o memcpy.o
 lib-$(CONFIG_MCKINLEY)	+= copy_page_mck.o memcpy_mck.o
 lib-$(CONFIG_PERFMON)	+= carta_random.o
-lib-$(CONFIG_MD_RAID456)	+= xor.o
 
 AFLAGS___divdi3.o	=
 AFLAGS___udivdi3.o	= -DUNSIGNED
diff --git a/arch/ia64/lib/csum_partial_copy.c b/arch/ia64/lib/csum_partial_copy.c
index 503dfe6d1450..118daf5a0632 100644
--- a/arch/ia64/lib/csum_partial_copy.c
+++ b/arch/ia64/lib/csum_partial_copy.c
@@ -128,6 +128,8 @@ csum_partial_copy_from_user(const void __user *src, void *dst,
 	return (__force __wsum)result;
 }
 
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
 __wsum
 csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
 {
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index ca4d41e5f177..44ce5ed9444c 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -97,26 +97,6 @@ void show_mem(void)
 unsigned long bootmap_start;
 
 /**
- * find_max_pfn - adjust the maximum page number callback
- * @start: start of range
- * @end: end of range
- * @arg: address of pointer to global max_pfn variable
- *
- * Passed as a callback function to efi_memmap_walk() to determine the highest
- * available page frame number in the system.
- */
-int
-find_max_pfn (unsigned long start, unsigned long end, void *arg)
-{
-	unsigned long *max_pfnp = arg, pfn;
-
-	pfn = (PAGE_ALIGN(end - 1) - PAGE_OFFSET) >> PAGE_SHIFT;
-	if (pfn > *max_pfnp)
-		*max_pfnp = pfn;
-	return 0;
-}
-
-/**
  * find_bootmap_location - callback to find a memory area for the bootmap
  * @start: start of region
  * @end: end of region
@@ -177,9 +157,10 @@ find_memory (void)
 	reserve_memory();
 
 	/* first find highest page frame number */
-	max_pfn = 0;
-	efi_memmap_walk(find_max_pfn, &max_pfn);
-
+	min_low_pfn = ~0UL;
+	max_low_pfn = 0;
+	efi_memmap_walk(find_max_min_low_pfn, NULL);
+	max_pfn = max_low_pfn;
 	/* how many bytes to cover all the pages */
 	bootmap_size = bootmem_bootmap_pages(max_pfn) << PAGE_SHIFT;
 
@@ -189,7 +170,8 @@ find_memory (void)
 	if (bootmap_start == ~0UL)
 		panic("Cannot find %ld bytes for bootmap\n", bootmap_size);
 
-	bootmap_size = init_bootmem(bootmap_start >> PAGE_SHIFT, max_pfn);
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+			(bootmap_start >> PAGE_SHIFT), 0, max_pfn);
 
 	/* Free all available memory, then mark bootmem-map as being in use. */
 	efi_memmap_walk(filter_rsvd_memory, free_bootmem);
@@ -197,11 +179,6 @@ find_memory (void)
 
 	find_initrd();
 
-#ifdef CONFIG_CRASH_DUMP
-	/* If we are doing a crash dump, we still need to know the real mem
-	 * size before original memory map is reset. */
-	saved_max_pfn = max_pfn;
-#endif
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 16835108bb5b..872da7a2accd 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -88,9 +88,6 @@ static int __init build_node_maps(unsigned long start, unsigned long len,
 		bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
 	}
 
-	min_low_pfn = min(min_low_pfn, bdp->node_boot_start>>PAGE_SHIFT);
-	max_low_pfn = max(max_low_pfn, bdp->node_low_pfn);
-
 	return 0;
 }
 
@@ -438,6 +435,7 @@ void __init find_memory(void)
 	/* These actually end up getting called by call_pernode_memory() */
 	efi_memmap_walk(filter_rsvd_memory, build_node_maps);
 	efi_memmap_walk(filter_rsvd_memory, find_pernode_space);
+	efi_memmap_walk(find_max_min_low_pfn, NULL);
 
 	for_each_online_node(node)
 		if (mem_data[node].bootmem_data.node_low_pfn) {
@@ -480,12 +478,6 @@ void __init find_memory(void)
 	max_pfn = max_low_pfn;
 
 	find_initrd();
-
-#ifdef CONFIG_CRASH_DUMP
-	/* If we are doing a crash dump, we still need to know the real mem
-	 * size before original memory map is reset. */
-        saved_max_pfn = max_pfn;
-#endif
 }
 
 #ifdef CONFIG_SMP
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index f225dd72968b..4f36987eea72 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -155,7 +155,7 @@ ia64_set_rbs_bot (void)
 
 	if (stack_size > MAX_USER_STACK_SIZE)
 		stack_size = MAX_USER_STACK_SIZE;
-	current->thread.rbs_bot = STACK_TOP - stack_size;
+	current->thread.rbs_bot = PAGE_ALIGN(current->mm->start_stack - stack_size);
 }
 
 /*
@@ -648,6 +648,22 @@ count_reserved_pages (u64 start, u64 end, void *arg)
 	return 0;
 }
 
+int
+find_max_min_low_pfn (unsigned long start, unsigned long end, void *arg)
+{
+	unsigned long pfn_start, pfn_end;
+#ifdef CONFIG_FLATMEM
+	pfn_start = (PAGE_ALIGN(__pa(start))) >> PAGE_SHIFT;
+	pfn_end = (PAGE_ALIGN(__pa(end - 1))) >> PAGE_SHIFT;
+#else
+	pfn_start = GRANULEROUNDDOWN(__pa(start)) >> PAGE_SHIFT;
+	pfn_end = GRANULEROUNDUP(__pa(end - 1)) >> PAGE_SHIFT;
+#endif
+	min_low_pfn = min(min_low_pfn, pfn_start);
+	max_low_pfn = max(max_low_pfn, pfn_end);
+	return 0;
+}
+
 /*
  * Boot command-line option "nolwsys" can be used to disable the use of any light-weight
  * system call handler.  When this option is in effect, all fsyscalls will end up bubbling
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 474d179966dc..0e83f3b419b5 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -557,14 +557,17 @@ pcibios_enable_device (struct pci_dev *dev, int mask)
 	if (ret < 0)
 		return ret;
 
-	return acpi_pci_irq_enable(dev);
+	if (!dev->msi_enabled)
+		return acpi_pci_irq_enable(dev);
+	return 0;
 }
 
 void
 pcibios_disable_device (struct pci_dev *dev)
 {
 	BUG_ON(atomic_read(&dev->enable_cnt));
-	acpi_pci_irq_disable(dev);
+	if (!dev->msi_enabled)
+		acpi_pci_irq_disable(dev);
 }
 
 void
diff --git a/arch/ia64/sn/kernel/bte_error.c b/arch/ia64/sn/kernel/bte_error.c
index f1ec1370b3e3..b6fcf8164f2b 100644
--- a/arch/ia64/sn/kernel/bte_error.c
+++ b/arch/ia64/sn/kernel/bte_error.c
@@ -78,7 +78,7 @@ int shub1_bte_error_handler(unsigned long _nodepda)
 		 * There are errors which still need to be cleaned up by
 		 * hubiio_crb_error_handler
 		 */
-		mod_timer(recovery_timer, HZ * 5);
+		mod_timer(recovery_timer, jiffies + (HZ * 5));
 		BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
 			    smp_processor_id()));
 		return 1;
@@ -95,7 +95,7 @@ int shub1_bte_error_handler(unsigned long _nodepda)
 			icrbd.ii_icrb0_d_regval =
 			    REMOTE_HUB_L(nasid, IIO_ICRB_D(i));
 			if (icrbd.d_bteop) {
-				mod_timer(recovery_timer, HZ * 5);
+				mod_timer(recovery_timer, jiffies + (HZ * 5));
 				BTE_PRINTK(("eh:%p:%d Valid %d, Giving up\n",
 					    err_nodepda, smp_processor_id(),
 					    i));
@@ -150,7 +150,7 @@ int shub2_bte_error_handler(unsigned long _nodepda)
 		status = BTE_LNSTAT_LOAD(bte);
 		if ((status & IBLS_ERROR) || !(status & IBLS_BUSY))
 			continue;
-		mod_timer(recovery_timer, HZ * 5);
+		mod_timer(recovery_timer, jiffies + (HZ * 5));
 		BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
 			    smp_processor_id()));
 		return 1;
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 8c331ca6e5c9..c6216f454ffb 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -53,12 +53,15 @@ sal_ioif_init(u64 *result)
 }
 
 /*
- * sn_hubdev_add - The 'add' function of the acpi_sn_hubdev_driver.
- *		   Called for every "SGIHUB" or "SGITIO" device defined
- *		   in the ACPI namespace.
+ * sn_acpi_hubdev_init() - This function is called by acpi_ns_get_device_callback()
+ *			   for all SGIHUB and SGITIO acpi devices defined in the
+ *			   DSDT. It obtains the hubdev_info pointer from the
+ *			   ACPI vendor resource, which the PROM setup, and sets up the
+ *			   hubdev_info in the pda.
  */
-static int __init
-sn_hubdev_add(struct acpi_device *device)
+
+static acpi_status __init
+sn_acpi_hubdev_init(acpi_handle handle, u32 depth, void *context, void **ret)
 {
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	u64 addr;
@@ -67,18 +70,19 @@ sn_hubdev_add(struct acpi_device *device)
 	int i;
 	u64 nasid;
 	struct acpi_resource *resource;
-	int ret = 0;
 	acpi_status status;
 	struct acpi_resource_vendor_typed *vendor;
 	extern void sn_common_hubdev_init(struct hubdev_info *);
 
-	status = acpi_get_vendor_resource(device->handle, METHOD_NAME__CRS,
+	status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
 					  &sn_uuid, &buffer);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR
-		       "sn_hubdev_add: acpi_get_vendor_resource() failed: %d\n",
-		        status);
-		return 1;
+		       "sn_acpi_hubdev_init: acpi_get_vendor_resource() "
+		       "(0x%x) failed for: ", status);
+		acpi_ns_print_node_pathname(handle, NULL);
+		printk("\n");
+		return AE_OK;		/* Continue walking namespace */
 	}
 
 	resource = buffer.pointer;
@@ -86,9 +90,10 @@ sn_hubdev_add(struct acpi_device *device)
 	if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
 	    sizeof(struct hubdev_info *)) {
 		printk(KERN_ERR
-		       "sn_hubdev_add: Invalid vendor data length: %d\n",
+		       "sn_acpi_hubdev_init: Invalid vendor data length: %d for: ",
 		        vendor->byte_length);
-		ret = 1;
+		acpi_ns_print_node_pathname(handle, NULL);
+		printk("\n");
 		goto exit;
 	}
 
@@ -103,7 +108,7 @@ sn_hubdev_add(struct acpi_device *device)
 
 exit:
 	kfree(buffer.pointer);
-	return ret;
+	return AE_OK;		/* Continue walking namespace */
 }
 
 /*
@@ -441,14 +446,6 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 
 EXPORT_SYMBOL(sn_acpi_slot_fixup);
 
-static struct acpi_driver acpi_sn_hubdev_driver = {
-	.name = "SGI HUBDEV Driver",
-	.ids = "SGIHUB,SGITIO",
-	.ops = {
-		.add = sn_hubdev_add,
-		},
-};
-
 
 /*
  * sn_acpi_bus_fixup -  Perform SN specific setup of software structs
@@ -492,7 +489,10 @@ sn_io_acpi_init(void)
 	/* SN Altix does not follow the IOSAPIC IRQ routing model */
 	acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
 
-	acpi_bus_register_driver(&acpi_sn_hubdev_driver);
+	/* Setup hubdev_info for all SGIHUB/SGITIO devices */
+	acpi_get_devices("SGIHUB", sn_acpi_hubdev_init, NULL, NULL);
+	acpi_get_devices("SGITIO", sn_acpi_hubdev_init, NULL, NULL);
+
 	status = sal_ioif_init(&result);
 	if (status || result)
 		panic("sal_ioif_init failed: [%lx] %s\n",
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 600be3ebae05..6b10e5d28488 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -247,10 +247,18 @@ sn_io_slot_fixup(struct pci_dev *dev)
 		addr = ((addr << 4) >> 4) | __IA64_UNCACHED_OFFSET;
 		dev->resource[idx].start = addr;
 		dev->resource[idx].end = addr + size;
+
+		/*
+		 * if it's already in the device structure, remove it before
+		 * inserting
+		 */
+		if (dev->resource[idx].parent && dev->resource[idx].parent->child)
+			release_resource(&dev->resource[idx]);
+
 		if (dev->resource[idx].flags & IORESOURCE_IO)
-			dev->resource[idx].parent = &ioport_resource;
+			insert_resource(&ioport_resource, &dev->resource[idx]);
 		else
-			dev->resource[idx].parent = &iomem_resource;
+			insert_resource(&iomem_resource, &dev->resource[idx]);
 		/* If ROM, mark as shadowed in PROM */
 		if (idx == PCI_ROM_RESOURCE)
 			dev->resource[idx].flags |= IORESOURCE_ROM_BIOS_COPY;
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 8c5bee01eaa2..8d2a1bfbfe7c 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -205,7 +205,17 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask)
 		(void)sn_retarget_vector(sn_irq_info, nasid, slice);
 }
 
-struct hw_interrupt_type irq_type_sn = {
+static void
+sn_mask_irq(unsigned int irq)
+{
+}
+
+static void
+sn_unmask_irq(unsigned int irq)
+{
+}
+
+struct irq_chip irq_type_sn = {
 	.name		= "SN hub",
 	.startup	= sn_startup_irq,
 	.shutdown	= sn_shutdown_irq,
@@ -213,6 +223,8 @@ struct hw_interrupt_type irq_type_sn = {
 	.disable	= sn_disable_irq,
 	.ack		= sn_ack_irq,
 	.end		= sn_end_irq,
+	.mask		= sn_mask_irq,
+	.unmask		= sn_unmask_irq,
 	.set_affinity	= sn_set_affinity_irq
 };
 
diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c
index ea3dc38d73fd..49873aa4a37d 100644
--- a/arch/ia64/sn/kernel/msi_sn.c
+++ b/arch/ia64/sn/kernel/msi_sn.c
@@ -204,7 +204,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask)
 	msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
 
 	write_msi_msg(irq, &msg);
-	set_native_irq_info(irq, cpu_mask);
+	irq_desc[irq].affinity = cpu_mask;
 }
 #endif /* CONFIG_SMP */
 
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 8571e52c2efd..a9bed5ca2ed8 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -348,8 +348,7 @@ sn_scan_pcdp(void)
 			continue;	/* not PCI interconnect */
 
 		if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
-			vga_console_iobase =
-				if_pci.ioport_tra | __IA64_UNCACHED_OFFSET;
+			vga_console_iobase = if_pci.ioport_tra;
 
 		if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
 			vga_console_membase =
@@ -397,6 +396,8 @@ void __init sn_setup(char **cmdline_p)
 	ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
 	ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
 
+	/* Load the new DSDT and SSDT tables into the global table list. */
+	acpi_table_init();
 
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	/*
@@ -427,7 +428,8 @@ void __init sn_setup(char **cmdline_p)
 	 * 	bus containing the VGA console.
 	 */
 	if (vga_console_iobase) {
-		io_space[0].mmio_base = vga_console_iobase;
+		io_space[0].mmio_base =
+			(unsigned long) ioremap(vga_console_iobase, 0);
 		io_space[0].sparse = 0;
 	}
 
diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c
index c8173db0d84f..5419acb89a8c 100644
--- a/arch/ia64/sn/kernel/xpnet.c
+++ b/arch/ia64/sn/kernel/xpnet.c
@@ -233,7 +233,7 @@ xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
 			"%lu)\n", skb->data, &msg->data,
 			(size_t) msg->embedded_bytes);
 
-		memcpy(skb->data, &msg->data, (size_t) msg->embedded_bytes);
+		skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes);
 	} else {
 		dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
 			"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
@@ -264,17 +264,16 @@ xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
 
 	dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
-		(void *) skb->data, (void *) skb->tail, (void *) skb->end,
+		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
 		skb->len);
 
-	skb->dev = xpnet_device;
 	skb->protocol = eth_type_trans(skb, xpnet_device);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
 	dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p "
 		"skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n",
-		(void *) skb->head, (void *) skb->data, (void *) skb->tail,
-		(void *) skb->end, skb->len);
+		(void *)skb->head, (void *)skb->data, skb_tail_pointer(skb),
+		skb_end_pointer(skb), skb->len);
 
 
 	xpnet_device->last_rx = jiffies;
@@ -476,7 +475,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
 		"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
-		(void *) skb->data, (void *) skb->tail, (void *) skb->end,
+		(void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
 		skb->len);
 
 
@@ -498,7 +497,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* get the beginning of the first cacheline and end of last */
 	start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
-	end_addr = L1_CACHE_ALIGN((u64) skb->tail);
+	end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb));
 
 	/* calculate how many bytes to embed in the XPC message */
 	embedded_bytes = 0;
@@ -567,14 +566,15 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			msg->version = XPNET_VERSION_EMBED;
 			dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
 				&msg->data, skb->data, (size_t) embedded_bytes);
-			memcpy(&msg->data, skb->data, (size_t) embedded_bytes);
+			skb_copy_from_linear_data(skb, &msg->data,
+						  (size_t)embedded_bytes);
 		} else {
 			msg->version = XPNET_VERSION;
 		}
 		msg->magic = XPNET_MAGIC;
 		msg->size = end_addr - start_addr;
 		msg->leadin_ignore = (u64) skb->data - start_addr;
-		msg->tailout_ignore = end_addr - (u64) skb->tail;
+		msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb);
 		msg->buf_pa = __pa(start_addr);
 
 		dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa="
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index 1ee977fb6ebb..95af40cb22f2 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -96,10 +96,14 @@ pcibr_dmamap_ate32(struct pcidev_info *info,
 	}
 
 	/*
-	 * If we're mapping for MSI, set the MSI bit in the ATE
+	 * If we're mapping for MSI, set the MSI bit in the ATE.  If it's a
+	 * TIOCP based pci bus, we also need to set the PIO bit in the ATE.
 	 */
-	if (dma_flags & SN_DMA_MSI)
+	if (dma_flags & SN_DMA_MSI) {
 		ate |= PCI32_ATE_MSI;
+		if (IS_TIOCP_SOFT(pcibus_info))
+			ate |= PCI32_ATE_PIO;
+	}
 
 	ate_write(pcibus_info, ate_index, ate_count, ate);
 
diff --git a/arch/m32r/lib/usercopy.c b/arch/m32r/lib/usercopy.c
index 896cef1aca5f..82abd159dbef 100644
--- a/arch/m32r/lib/usercopy.c
+++ b/arch/m32r/lib/usercopy.c
@@ -293,7 +293,7 @@ long strnlen_user(const char __user *s, long n)
 		: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
 		: "r0", "r1", "cbit");
 
-	/* NOTE: strnlen_user() algorism:
+	/* NOTE: strnlen_user() algorithm:
 	 * {
 	 *   char *p;
 	 *   for (p = s; n-- && *p != '\0'; ++p)
@@ -369,7 +369,7 @@ long strnlen_user(const char __user *s, long n)
 		: "0" (n), "1" (s), "r" (n & 3), "r" (mask), "r"(0x01010101)
 		: "r0", "r1", "r2", "r3", "cbit");
 
-	/* NOTE: strnlen_user() algorism:
+	/* NOTE: strnlen_user() algorithm:
 	 * {
 	 *   char *p;
 	 *   for (p = s; n-- && *p != '\0'; ++p)
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index 84aceca6c05c..b66c97c904b3 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -28,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/sched.h>
+#include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/errno.h>
 #include <linux/init.h>
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index d5c25d27b64d..8133b1047353 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -51,7 +51,7 @@ static void dummy_waitbut(void)
 {
 }
 
-void (*mach_sched_init) (irqreturn_t (*handler)(int, void *, struct pt_regs *));
+void (*mach_sched_init) (irq_handler_t handler);
 void (*mach_tick)( void );
 /* machine dependent keyboard functions */
 int (*mach_keyb_init) (void);
@@ -66,7 +66,7 @@ void (*mach_trap_init) (void);
 /* machine dependent timer functions */
 unsigned long (*mach_gettimeoffset) (void);
 void (*mach_gettod) (int*, int*, int*, int*, int*, int*);
-int (*mach_hwclk) (int, struct hwclk_time*);
+int (*mach_hwclk) (int, struct rtc_time*);
 int (*mach_set_clock_mmss) (unsigned long);
 void (*mach_mksound)( unsigned int count, unsigned int ticks );
 void (*mach_reset)( void );
diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c
index a57239ec6c8c..751633038c4b 100644
--- a/arch/m68knommu/platform/5307/ints.c
+++ b/arch/m68knommu/platform/5307/ints.c
@@ -19,6 +19,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/sched.h>
+#include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/errno.h>
 #include <linux/seq_file.h>
@@ -41,7 +42,6 @@ static irq_node_t nodes[NUM_IRQ_NODES];
 /* The number of spurious interrupts */
 volatile unsigned int num_spurious;
 
-unsigned int local_bh_count[NR_CPUS];
 unsigned int local_irq_count[NR_CPUS];
 
 static irqreturn_t default_irq_handler(int irq, void *ptr)
diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
index 87b112b363a6..92e58070b016 100644
--- a/arch/m68knommu/platform/5307/timers.c
+++ b/arch/m68knommu/platform/5307/timers.c
@@ -104,7 +104,7 @@ unsigned long coldfire_timer_offset(void)
 
 /*
  *	Choose a reasonably fast profile timer. Make it an odd value to
- *	try and get good coverage of kernal operations.
+ *	try and get good coverage of kernel operations.
  */
 #define	PROFILEHZ	1013
 
diff --git a/arch/m68knommu/platform/68328/ints.c b/arch/m68knommu/platform/68328/ints.c
index 2dda7339aae5..3de6e337554e 100644
--- a/arch/m68knommu/platform/68328/ints.c
+++ b/arch/m68knommu/platform/68328/ints.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
 #include <linux/errno.h>
+#include <linux/interrupt.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
@@ -64,7 +65,7 @@ asmlinkage void trap44(void);
 asmlinkage void trap45(void);
 asmlinkage void trap46(void);
 asmlinkage void trap47(void);
-asmlinkage irqreturn_t bad_interrupt(int, void *, struct pt_regs *);
+asmlinkage irqreturn_t bad_interrupt(int, void *);
 asmlinkage irqreturn_t inthandler(void);
 asmlinkage irqreturn_t inthandler1(void);
 asmlinkage irqreturn_t inthandler2(void);
@@ -121,7 +122,7 @@ void init_IRQ(void)
 
 int request_irq(
 	unsigned int irq,
-	irqreturn_t (*handler)(int, void *, struct pt_regs *),
+	irq_handler_t handler,
 	unsigned long flags,
 	const char *devname,
 	void *dev_id)
diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c
index 438ef6ee9720..ef067f4c3cd4 100644
--- a/arch/m68knommu/platform/68328/timers.c
+++ b/arch/m68knommu/platform/68328/timers.c
@@ -17,6 +17,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/interrupt.h>
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -52,7 +53,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *))
+void m68328_timer_init(irq_handler_t timer_routine)
 {
 	/* disable timer 1 */
 	TCTL = 0;
diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c
index 1b36f6261764..4ff13bd51ffd 100644
--- a/arch/m68knommu/platform/68360/config.c
+++ b/arch/m68knommu/platform/68360/config.c
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
 
 #include <asm/setup.h>
 #include <asm/system.h>
@@ -50,7 +51,7 @@ extern unsigned long int system_clock; //In kernel setup.c
 
 extern void config_M68360_irq(void);
 
-void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *))
+void BSP_sched_init(irq_handler_t timer_routine)
 {
   unsigned char prescaler;
   unsigned short tgcr_save;
diff --git a/arch/m68knommu/platform/68EZ328/config.c b/arch/m68knommu/platform/68EZ328/config.c
index 659b80aca118..ab36551fc969 100644
--- a/arch/m68knommu/platform/68EZ328/config.c
+++ b/arch/m68knommu/platform/68EZ328/config.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
 
 #include <asm/setup.h>
 #include <asm/system.h>
@@ -31,7 +32,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *));
+void m68328_timer_init(irq_handler_t timer_routine);
 void m68328_timer_tick(void);
 unsigned long m68328_timer_gettimeoffset(void);
 void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
diff --git a/arch/m68knommu/platform/68VZ328/config.c b/arch/m68knommu/platform/68VZ328/config.c
index fcd100b7594d..8abe0f6e7235 100644
--- a/arch/m68knommu/platform/68VZ328/config.c
+++ b/arch/m68knommu/platform/68VZ328/config.c
@@ -21,6 +21,7 @@
 #include <linux/console.h>
 #include <linux/kd.h>
 #include <linux/netdevice.h>
+#include <linux/interrupt.h>
 
 #include <asm/setup.h>
 #include <asm/system.h>
@@ -36,7 +37,7 @@
 
 /***************************************************************************/
 
-void m68328_timer_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *));
+void m68328_timer_init(irq_handler_t timer_routine);
 void m68328_timer_tick(void);
 unsigned long m68328_timer_gettimeoffset(void);
 void m68328_timer_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec);
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a92ce6bd7cf1..130d825e5438 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -10,7 +10,6 @@ menu "Machine selection"
 
 config ZONE_DMA
 	bool
-	default y
 
 choice
 	prompt "System type"
@@ -133,7 +132,7 @@ config MIPS_MIRAGE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config BASLER_EXCITE
-	bool "Basler eXcite smart camera support"
+	bool "Basler eXcite smart camera"
 	select DMA_COHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -144,9 +143,10 @@ config BASLER_EXCITE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
-	  Basler Vision Technologies AG
+	  Basler Vision Technologies AG.
 
 config BASLER_EXCITE_PROTOTYPE
 	bool "Support for pre-release units"
@@ -164,8 +164,9 @@ config MIPS_COBALT
 	select HW_HAS_PCI
 	select I8259
 	select IRQ_CPU
-	select MIPS_GT64111
+	select PCI_GT64XXX_PCI0
 	select SYS_HAS_CPU_NEVADA
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -175,7 +176,7 @@ config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
-	select EARLY_PRINTK
+	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
 	select SYS_HAS_CPU_R3000
 	select SYS_HAS_CPU_R4X00
@@ -205,11 +206,12 @@ config MIPS_EV64120
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select MIPS_GT64120
+	select PCI_GT64XXX_PCI0
 	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	help
 	  This is an evaluation board based on the Galileo GT-64120
 	  single-chip system controller that contains a MIPS R5000 compatible
@@ -240,13 +242,14 @@ config MACH_JAZZ
 config LASAT
 	bool "LASAT Networks platforms"
 	select DMA_NONCOHERENT
+	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
-	select MIPS_GT64120
+	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
 	select R5000_CPU_SCACHE
 	select SYS_HAS_CPU_R5000
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
@@ -254,11 +257,12 @@ config MIPS_ATLAS
 	bool "MIPS Atlas board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
+	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
 	select HW_HAS_PCI
 	select MIPS_BOARDS_GEN
 	select MIPS_BONITO64
-	select MIPS_GT64120
+	select PCI_GT64XXX_PCI0
 	select MIPS_MSC
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
@@ -272,6 +276,7 @@ config MIPS_ATLAS
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
+	select SYS_SUPPORTS_SMARTMIPS
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	help
 	  This enables support for the MIPS Technologies Atlas evaluation
@@ -290,7 +295,7 @@ config MIPS_MALTA
 	select MIPS_BOARDS_GEN
 	select MIPS_BONITO64
 	select MIPS_CPU_SCACHE
-	select MIPS_GT64120
+	select PCI_GT64XXX_PCI0
 	select MIPS_MSC
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -298,11 +303,13 @@ config MIPS_MALTA
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_CPU_RM7000
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_SMARTMIPS
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
@@ -312,6 +319,7 @@ config MIPS_SEAD
 	depends on EXPERIMENTAL
 	select IRQ_CPU
 	select DMA_NONCOHERENT
+	select SYS_HAS_EARLY_PRINTK
 	select MIPS_BOARDS_GEN
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -320,6 +328,7 @@ config MIPS_SEAD
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_SMARTMIPS
 	help
 	  This enables support for the MIPS Technologies SEAD evaluation
 	  board.
@@ -330,7 +339,7 @@ config WR_PPMC
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
-	select MIPS_GT64120
+	select PCI_GT64XXX_PCI0
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -348,9 +357,11 @@ config WR_PPMC
 config MIPS_SIM
 	bool 'MIPS simulator (MIPSsim)'
 	select DMA_NONCOHERENT
+	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -371,9 +382,11 @@ config MOMENCO_JAGUAR_ATX
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_RM9000
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	help
 	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
@@ -384,13 +397,14 @@ config MOMENCO_OCELOT
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
-	select MIPS_GT64120
+	select PCI_GT64XXX_PCI0
 	select RM7000_CPU_SCACHE
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_RM7000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
@@ -455,11 +469,6 @@ config MIPS_XXS1500
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config PNX8550_V2PCI
-	bool "Philips PNX8550 based Viper2-PCI board"
-	select PNX8550
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config PNX8550_JBS
 	bool "Philips PNX8550 based JBS board"
 	select PNX8550
@@ -480,6 +489,8 @@ config DDB5477
 	select SYS_HAS_CPU_R5432
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+	select SYS_SUPPORTS_KGDB
+	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This enables support for the R5432-based NEC DDB Vrc-5477,
@@ -489,10 +500,8 @@ config DDB5477
 	  ether port USB, AC97, PCI, etc.
 
 config MACH_VR41XX
-	bool "NEC VR41XX-based machines"
+	bool "NEC VR4100 series based machines"
 	select SYS_HAS_CPU_VR41XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config PMC_YOSEMITE
@@ -504,10 +513,12 @@ config PMC_YOSEMITE
 	select IRQ_CPU_RM9K
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_RM9000
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -528,6 +539,8 @@ config QEMU
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select NR_CPUS_DEFAULT_1
+	select SYS_SUPPORTS_SMP
 	help
 	  Qemu is a software emulator which among other architectures also
 	  can simulate a MIPS32 4Kc system.  This patch adds support for the
@@ -563,6 +576,7 @@ config SGI_IP22
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -577,13 +591,14 @@ config SGI_IP27
 	select ARC64
 	select BOOT_ELF64
 	select DMA_IP27
-	select EARLY_PRINTK
+	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
 	select PCI_DOMAINS
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -633,6 +648,7 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
@@ -726,16 +742,18 @@ config SNI_RM
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
-	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_EISA
 	select HW_HAS_PCI
+	select IRQ_CPU
 	select I8253
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
+	select SYS_HAS_CPU_R10000
 	select R5000_CPU_SCACHE
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -758,6 +776,7 @@ config TOSHIBA_JMR3927
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select TOSHIBA_BOARDS
+	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config TOSHIBA_RBTX4927
 	bool "Toshiba TBTX49[23]7 board"
@@ -772,6 +791,7 @@ config TOSHIBA_RBTX4927
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	select TOSHIBA_BOARDS
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	help
@@ -792,6 +812,7 @@ config TOSHIBA_RBTX4938
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
 	select TOSHIBA_BOARDS
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	help
@@ -812,7 +833,6 @@ source "arch/mips/tx4927/Kconfig"
 source "arch/mips/tx4938/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/philips/pnx8550/common/Kconfig"
-source "arch/mips/cobalt/Kconfig"
 
 endmenu
 
@@ -882,10 +902,25 @@ config DMA_NEED_PCI_MAP_STATE
 	bool
 
 config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+	depends on SYS_HAS_EARLY_PRINTK
+	default y
+	help
+	  This option enables special console drivers which allow the kernel
+	  to print messages very early in the bootup process.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks on some machines ugly and
+	  oesn't cooperate with an X server. You should normally N here,
+	  unless you want to debug such a crash.
+
+config SYS_HAS_EARLY_PRINTK
 	bool
 
 config GENERIC_ISA_DMA
 	bool
+	select ZONE_DMA
 
 config I8259
 	bool
@@ -909,6 +944,7 @@ config MIPS_DISABLE_OBSOLETE_IDE
 
 config GENERIC_ISA_DMA_SUPPORT_BROKEN
 	bool
+	select ZONE_DMA
 
 #
 # Endianess selection.  Sufficiently obscure so many users don't know what to
@@ -958,14 +994,12 @@ config IRQ_MV64340
 
 config DDB5XXX_COMMON
 	bool
+	select SYS_SUPPORTS_KGDB
 
 config MIPS_BOARDS_GEN
 	bool
 
-config MIPS_GT64111
-	bool
-
-config MIPS_GT64120
+config PCI_GT64XXX_PCI0
 	bool
 
 config MIPS_TX3927
@@ -1006,6 +1040,7 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
+	select SYS_SUPPORTS_KGDB
 
 config PNX8550
 	bool
@@ -1016,8 +1051,10 @@ config SOC_PNX8550
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select SYS_SUPPORTS_KGDB
 
 config SWAP_IO_SPACE
 	bool
@@ -1066,7 +1103,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION
+	default "4" if MACH_DECSTATION || SNI_RM
 	default "7" if SGI_IP27
 	default "5"
 
@@ -1075,7 +1112,7 @@ config HAVE_STD_PC_SERIAL_PORT
 
 config ARC_CONSOLE
 	bool "ARC console support"
-	depends on SGI_IP22 || SNI_RM
+	depends on SGI_IP22 || (SNI_RM && CPU_LITTLE_ENDIAN)
 
 config ARC_MEMORY
 	bool
@@ -1521,6 +1558,7 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_SRS
 	select MIPS_MT
+	select NR_CPUS_DEFAULT_2
 	select SMP
 	select SYS_SUPPORTS_SMP
 	help
@@ -1535,7 +1573,6 @@ config MIPS_MT_SMTC
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_SRS
 	select MIPS_MT
-	select NR_CPUS_DEFAULT_2
 	select NR_CPUS_DEFAULT_8
 	select SMP
 	select SYS_SUPPORTS_SMP
@@ -1566,7 +1603,7 @@ config MIPS_MT_FPAFF
 
 config MIPS_MT_SMTC_INSTANT_REPLAY
 	bool "Low-latency Dispatch of Deferred SMTC IPIs"
-	depends on MIPS_MT_SMTC
+	depends on MIPS_MT_SMTC && !PREEMPT
 	default y
 	help
 	  SMTC pseudo-interrupts between TCs are deferred and queued
@@ -1626,6 +1663,18 @@ config 64BIT_PHYS_ADDR
 config CPU_HAS_LLSC
 	bool
 
+config CPU_HAS_SMARTMIPS
+	depends on SYS_SUPPORTS_SMARTMIPS
+	bool "Support for the SmartMIPS ASE"
+	help
+	  SmartMIPS is a extension of the MIPS32 architecture aimed at
+	  increased security at both hardware and software level for
+	  smartcards.  Enabling this option will allow proper use of the
+	  SmartMIPS instructions by Linux applications.  However a kernel with
+	  this option will not work on a MIPS core without SmartMIPS core.  If
+	  you don't know you probably don't have SmartMIPS and should say N
+	  here.
+
 config CPU_HAS_WB
 	bool
 
@@ -1689,6 +1738,9 @@ config CPU_SUPPORTS_HIGHMEM
 config SYS_SUPPORTS_HIGHMEM
 	bool
 
+config SYS_SUPPORTS_SMARTMIPS
+	bool
+
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 	depends on !NUMA
@@ -1752,6 +1804,9 @@ config SMP
 config SYS_SUPPORTS_SMP
 	bool
 
+config NR_CPUS_DEFAULT_1
+	bool
+
 config NR_CPUS_DEFAULT_2
 	bool
 
@@ -1772,8 +1827,9 @@ config NR_CPUS_DEFAULT_64
 
 config NR_CPUS
 	int "Maximum number of CPUs (2-64)"
-	range 2 64
+	range 1 64 if NR_CPUS_DEFAULT_1
 	depends on SMP
+	default "1" if NR_CPUS_DEFAULT_1
 	default "2" if NR_CPUS_DEFAULT_2
 	default "4" if NR_CPUS_DEFAULT_4
 	default "8" if NR_CPUS_DEFAULT_8
@@ -1784,10 +1840,13 @@ config NR_CPUS
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 32 for 32-bit
 	  kernel and 64 for 64-bit kernels; the minimum value which makes
-	  sense is 2.
+	  sense is 1 for Qemu (useful only for kernel debugging purposes)
+	  and 2 for all others.
 
 	  This is purely to save memory - each supported CPU adds
-	  approximately eight kilobytes to the kernel image.
+	  approximately eight kilobytes to the kernel image.  For best
+	  performance should round up your number of processors to the next
+	  power of two.
 
 #
 # Timer Interrupt Frequency Configuration
@@ -1862,10 +1921,6 @@ config HZ
 
 source "kernel/Kconfig.preempt"
 
-config RTC_DS1742
-	bool "DS1742 BRAM/RTC support"
-	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-
 config MIPS_INSANE_LARGE
 	bool "Support for large 64-bit configurations"
 	depends on CPU_R10000 && 64BIT
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 9351f1c04a9d..72d5c198e790 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -37,9 +37,18 @@ config DEBUG_STACK_USAGE
 
 	  This option will slow down process creation somewhat.
 
+config CONFIG_SMTC_IDLE_HOOK_DEBUG
+	bool "Enable additional debug checks before going into CPU idle loop"
+	depends on DEBUG_KERNEL && MIPS_MT_SMTC
+	help
+	  This option enables Enable additional debug checks before going into
+	  CPU idle loop.  For details on these checks, see
+	  arch/mips/kernel/smtc.c.  This debugging option result in significant
+	  overhead so should be disabled in production kernels.
+
 config KGDB
 	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
 	select DEBUG_INFO
 	help
 	  If you say Y here, it will be possible to remotely debug the MIPS
@@ -48,6 +57,9 @@ config KGDB
 	  better 32 MB RAM to avoid excessive linking time. This is only
 	  useful for kernel hackers. If unsure, say N.
 
+config SYS_SUPPORTS_KGDB
+	bool
+
 config GDB_CONSOLE
 	bool "Console output to GDB"
 	depends on KGDB
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index c68b5d3e5d18..f2f742df32c7 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -103,6 +103,8 @@ predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
 
+cflags-$(CONFIG_CPU_HAS_SMARTMIPS)	+= $(call cc-option,-msmartmips)
+
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
 
@@ -528,25 +530,29 @@ cflags-$(CONFIG_SGI_IP32)	+= -Iinclude/asm-mips/mach-ip32
 load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
 
 #
-# Sibyte SB1250 SOC
+# Sibyte SB1250/BCM1480 SOC
 #
 # This is a LIB so that it links at the end, and initcalls are later
 # the sequence; but it is built as an object so that modules don't get
 # removed (as happens, even if they have __initcall/module_init)
 #
 core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
+core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/common/
 cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
+core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/common/
 cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
+core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/common/
 cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -Iinclude/asm-mips/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
+core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/common/
 cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
 			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
diff --git a/arch/mips/arc/console.c b/arch/mips/arc/console.c
index 6a9d144512c0..0fe6032999cb 100644
--- a/arch/mips/arc/console.c
+++ b/arch/mips/arc/console.c
@@ -29,35 +29,3 @@ void prom_putchar(char c)
 	ArcWrite(1, &it, 1, &cnt);
 	bc_enable();
 }
-
-char prom_getchar(void)
-{
-	ULONG cnt;
-	CHAR c;
-
-	bc_disable();
-	ArcRead(0, &c, 1, &cnt);
-	bc_enable();
-
-	return c;
-}
-
-void prom_printf(char *fmt, ...)
-{
-	va_list args;
-	char ppbuf[1024];
-	char *bptr;
-
-	va_start(args, fmt);
-	vsprintf(ppbuf, fmt, args);
-
-	bptr = ppbuf;
-
-	while (*bptr != 0) {
-		if (*bptr == '\n')
-			prom_putchar('\r');
-
-		prom_putchar(*bptr++);
-	}
-	va_end(args);
-}
diff --git a/arch/mips/arc/init.c b/arch/mips/arc/init.c
index 76ab505ca693..e2f75b13312f 100644
--- a/arch/mips/arc/init.c
+++ b/arch/mips/arc/init.c
@@ -23,13 +23,16 @@ LONG *_prom_argv, *_prom_envp;
 void __init prom_init(void)
 {
 	PSYSTEM_PARAMETER_BLOCK pb = PROMBLOCK;
+
 	romvec = ROMVECTOR;
+
 	prom_argc = fw_arg0;
 	_prom_argv = (LONG *) fw_arg1;
 	_prom_envp = (LONG *) fw_arg2;
 
 	if (pb->magic != 0x53435241) {
-		prom_printf("Aieee, bad prom vector magic %08lx\n", pb->magic);
+		printk(KERN_CRIT "Aieee, bad prom vector magic %08lx\n",
+		       (unsigned long) pb->magic);
 		while(1)
 			;
 	}
@@ -41,8 +44,8 @@ void __init prom_init(void)
 	prom_meminit();
 
 #ifdef DEBUG_PROM_INIT
-	prom_printf("Press a key to reboot\n");
-	prom_getchar();
+	pr_info("Press a key to reboot\n");
+	ArcRead(0, &c, 1, &cnt);
 	ArcEnterInteractiveMode();
 #endif
 }
diff --git a/arch/mips/arc/memory.c b/arch/mips/arc/memory.c
index 456cb81a32d9..83d15791ef6a 100644
--- a/arch/mips/arc/memory.c
+++ b/arch/mips/arc/memory.c
@@ -118,11 +118,11 @@ void __init prom_meminit(void)
 #ifdef DEBUG
 	int i = 0;
 
-	prom_printf("ARCS MEMORY DESCRIPTOR dump:\n");
+	printk("ARCS MEMORY DESCRIPTOR dump:\n");
 	p = ArcGetMemoryDescriptor(PROM_NULL_MDESC);
 	while(p) {
-		prom_printf("[%d,%p]: base<%08lx> pages<%08lx> type<%s>\n",
-			    i, p, p->base, p->pages, mtypes(p->type));
+		printk("[%d,%p]: base<%08lx> pages<%08lx> type<%s>\n",
+		       i, p, p->base, p->pages, mtypes(p->type));
 		p = ArcGetMemoryDescriptor(p);
 		i++;
 	}
diff --git a/arch/mips/arc/tree.c b/arch/mips/arc/tree.c
index 2aedd4f52839..abd1786ea09b 100644
--- a/arch/mips/arc/tree.c
+++ b/arch/mips/arc/tree.c
@@ -93,11 +93,11 @@ static char *iflags[] = {
 static void __init
 dump_component(pcomponent *p)
 {
-	prom_printf("[%p]:class<%s>type<%s>flags<%s>ver<%d>rev<%d>",
-		    p, classes[p->class], types[p->type],
-		    iflags[p->iflags], p->vers, p->rev);
-	prom_printf("key<%08lx>\n\tamask<%08lx>cdsize<%d>ilen<%d>iname<%s>\n",
-		    p->key, p->amask, (int)p->cdsize, (int)p->ilen, p->iname);
+	printk("[%p]:class<%s>type<%s>flags<%s>ver<%d>rev<%d>",
+	       p, classes[p->class], types[p->type],
+	       iflags[p->iflags], p->vers, p->rev);
+	printk("key<%08lx>\n\tamask<%08lx>cdsize<%d>ilen<%d>iname<%s>\n",
+	       p->key, p->amask, (int)p->cdsize, (int)p->ilen, p->iname);
 }
 
 static void __init
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 13f9bf5f91a6..7bc5af8917da 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -43,6 +43,9 @@
 #include <asm/pgtable.h>
 #include <asm/mach-au1x00/au1000.h>
 
+extern int (*board_pci_idsel)(unsigned int devsel, int assert);
+int    mtx1_pci_idsel(unsigned int devsel, int assert);
+
 void board_reset (void)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
@@ -66,19 +69,43 @@ void __init board_setup(void)
 #endif
 
 	// initialize sys_pinfunc:
-	// disable second ethernet port (SYS_PF_NI2)
-	// set U3/GPIO23 to GPIO23 (SYS_PF_U3)
-	au_writel( SYS_PF_NI2 | SYS_PF_U3, SYS_PINFUNC );
+	au_writel( SYS_PF_NI2, SYS_PINFUNC );
 
 	// initialize GPIO
 	au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
 	au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
 	au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
+	au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
 	au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
 
 	// enable LED and set it to green
 	au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
 	au_writel( 0x18000800, GPIO2_OUTPUT );
 
+	board_pci_idsel = mtx1_pci_idsel;
+
 	printk("4G Systems MTX-1 Board\n");
 }
+
+int
+mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+#define MTX_IDSEL_ONLY_0_AND_3 0
+#if MTX_IDSEL_ONLY_0_AND_3
+       if (devsel != 0 && devsel != 3) {
+               printk("*** not 0 or 3\n");
+               return 0;
+       }
+#endif
+
+       if (assert && devsel != 0) {
+               // supress signal to cardbus
+               au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
+       }
+       else {
+               au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
+       }
+       au_sync_udelay(1);
+       return 1;
+}
+
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 4693a4eb2b82..a4fa0f227e42 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -48,7 +48,7 @@
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
+ [0] = { -1, INTA, INTA, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
  [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
  [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
  [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index a1ce4580058d..2f0e4c08eb04 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -63,7 +63,7 @@ volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
 volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
 
 /* Protect access to shared GPI registers */
-spinlock_t titan_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(titan_lock);
 int titan_irqflags;
 
 
@@ -112,7 +112,7 @@ static int __init excite_init_console(void)
 	up.irq		= TITAN_IRQ;
 	up.uartclk	= TITAN_UART_CLK;
 	up.regshift	= 0;
-	up.iotype	= UPIO_MEM32;
+	up.iotype	= UPIO_RM9000;
 	up.type		= PORT_RM9000;
 	up.flags	= UPF_SHARE_IRQ;
 	up.line		= 0;
diff --git a/arch/mips/cobalt/Kconfig b/arch/mips/cobalt/Kconfig
deleted file mode 100644
index 7c42b088d16c..000000000000
--- a/arch/mips/cobalt/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config EARLY_PRINTK
-	bool "Early console support"
-	depends on MIPS_COBALT
-	help
-	  Provide early console support by direct access to the
-	  on board UART. The UART must have been previously
-	  initialised by the boot loader.
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index c35ee25e5578..9565b2104dcd 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -4,6 +4,6 @@
 
 obj-y	 := irq.o reset.o setup.o buttons.o
 
+obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c
index 46c23b66bc17..0485d51f7216 100644
--- a/arch/mips/cobalt/console.c
+++ b/arch/mips/cobalt/console.c
@@ -1,47 +1,16 @@
 /*
  * (C) P. Horton 2006
  */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
 #include <linux/serial_reg.h>
+
 #include <asm/addrspace.h>
-#include <asm/mach-cobalt/cobalt.h>
 
-static void putchar(int c)
-{
-	if(c == '\n')
-		putchar('\r');
+#include <cobalt.h>
 
+void prom_putchar(char c)
+{
 	while(!(COBALT_UART[UART_LSR] & UART_LSR_THRE))
 		;
 
 	COBALT_UART[UART_TX] = c;
 }
-
-static void cons_write(struct console *c, const char *s, unsigned n)
-{
-	while(n-- && *s)
-		putchar(*s++);
-}
-
-static struct console cons_info =
-{
-	.name	= "uart",
-	.write	= cons_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1,
-};
-
-void __init cobalt_early_console(void)
-{
-	register_console(&cons_info);
-
-	printk("Cobalt: early console registered\n");
-}
-
-void __init disable_early_printk(void)
-{
-	unregister_console(&cons_info);
-}
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index fe93b846923b..950ad1e8be44 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -17,7 +17,7 @@
 #include <asm/irq_cpu.h>
 #include <asm/gt64120.h>
 
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
 
 /*
  * We have two types of interrupts that we handle, ones that come in through
diff --git a/arch/mips/cobalt/mtd.c b/arch/mips/cobalt/mtd.c
new file mode 100644
index 000000000000..2b088ef3839a
--- /dev/null
+++ b/arch/mips/cobalt/mtd.c
@@ -0,0 +1,61 @@
+/*
+ *  Registration of Cobalt MTD device.
+ *
+ *  Copyright (C) 2006  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+static struct mtd_partition cobalt_mtd_partitions[] = {
+	{
+		.name	= "firmware",
+		.offset	= 0x0,
+		.size	= 0x80000,
+	},
+};
+
+static struct physmap_flash_data cobalt_flash_data = {
+	.width		= 1,
+	.nr_parts	= 1,
+	.parts		= cobalt_mtd_partitions,
+};
+
+static struct resource cobalt_mtd_resource = {
+	.start	= 0x1fc00000,
+	.end	= 0x1fc7ffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cobalt_mtd = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &cobalt_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &cobalt_mtd_resource,
+};
+
+static int __init cobalt_mtd_init(void)
+{
+	platform_device_register(&cobalt_mtd);
+
+	return 0;
+}
+
+module_init(cobalt_mtd_init);
diff --git a/arch/mips/cobalt/pci.c b/arch/mips/cobalt/pci.c
new file mode 100644
index 000000000000..d91027f43de6
--- /dev/null
+++ b/arch/mips/cobalt/pci.c
@@ -0,0 +1,47 @@
+/*
+ * Register PCI controller.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
+ *
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/gt64120.h>
+
+extern struct pci_ops gt64xxx_pci0_ops;
+
+static struct resource cobalt_mem_resource = {
+	.start	= GT_DEF_PCI0_MEM0_BASE,
+	.end	= GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
+	.name	= "PCI memory",
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource cobalt_io_resource = {
+	.start	= 0x1000,
+	.end	= GT_DEF_PCI0_IO_SIZE - 1,
+	.name	= "PCI I/O",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct pci_controller cobalt_pci_controller = {
+	.pci_ops	= &gt64xxx_pci0_ops,
+	.mem_resource	= &cobalt_mem_resource,
+	.io_resource	= &cobalt_io_resource,
+	.io_offset	= 0 - GT_DEF_PCI0_IO_BASE,
+};
+
+static int __init cobalt_pci_init(void)
+{
+	register_pci_controller(&cobalt_pci_controller);
+
+	return 0;
+}
+
+arch_initcall(cobalt_pci_init);
diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c
index 753dfccae6fa..43cca21fdbc0 100644
--- a/arch/mips/cobalt/reset.c
+++ b/arch/mips/cobalt/reset.c
@@ -8,15 +8,12 @@
  * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
  * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
  */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/cacheflush.h>
+#include <linux/jiffies.h>
+
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/mach-cobalt/cobalt.h>
+
+#include <cobalt.h>
 
 void cobalt_machine_halt(void)
 {
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index a4b69b543bd9..d0dd81790f74 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -19,12 +19,10 @@
 #include <asm/bootinfo.h>
 #include <asm/time.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/gt64120.h>
 
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
 
 extern void cobalt_machine_restart(char *command);
 extern void cobalt_machine_halt(void);
@@ -63,61 +61,38 @@ void __init plat_timer_setup(struct irqaction *irq)
 	GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS));
 }
 
-extern struct pci_ops gt64111_pci_ops;
-
-static struct resource cobalt_mem_resource = {
-	.start	= GT_DEF_PCI0_MEM0_BASE,
-	.end	= GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
-	.name	= "PCI memory",
-	.flags	= IORESOURCE_MEM
-};
-
-static struct resource cobalt_io_resource = {
-	.start	= 0x1000,
-	.end	= 0xffff,
-	.name	= "PCI I/O",
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource cobalt_io_resources[] = {
-	{
+/*
+ * Cobalt doesn't have PS/2 keyboard/mouse interfaces,
+ * keyboard conntroller is never used.
+ * Also PCI-ISA bridge DMA contoroller is never used.
+ */
+static struct resource cobalt_reserved_resources[] = {
+	{	/* dma1 */
 		.start	= 0x00,
 		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
+	},
+	{	/* keyboard */
 		.start	= 0x60,
 		.end	= 0x6f,
-		.name	= "keyboard",
-		.flags	= IORESOURCE_BUSY
-	}, {
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
+	},
+	{	/* dma page reg */
 		.start	= 0x80,
 		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
+	},
+	{	/* dma2 */
 		.start	= 0xc0,
 		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
+		.name	= "reserved",
+		.flags	= IORESOURCE_BUSY | IORESOURCE_IO,
 	},
 };
 
-#define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource))
-
-static struct pci_controller cobalt_pci_controller = {
-	.pci_ops	= &gt64111_pci_ops,
-	.mem_resource	= &cobalt_mem_resource,
-	.mem_offset	= 0,
-	.io_resource	= &cobalt_io_resource,
-	.io_offset	= 0 - GT_DEF_PCI0_IO_BASE,
-};
-
 void __init plat_mem_setup(void)
 {
 	static struct uart_port uart;
@@ -130,12 +105,12 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
-	/* I/O port resource must include UART and LCD/buttons */
+	/* I/O port resource must include LCD/buttons */
 	ioport_resource.end = 0x0fffffff;
 
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < COBALT_IO_RESOURCES; i++)
-		request_resource(&ioport_resource, cobalt_io_resources + i);
+	/* These resources have been reserved by VIA SuperI/O chip. */
+	for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
+		request_resource(&ioport_resource, cobalt_reserved_resources + i);
 
         /* Read the cobalt id register out of the PCI config space */
         PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
@@ -145,28 +120,20 @@ void __init plat_mem_setup(void)
 
 	printk("Cobalt board ID: %d\n", cobalt_board_id);
 
-#ifdef CONFIG_PCI
-	register_pci_controller(&cobalt_pci_controller);
-#endif
-
-#ifdef CONFIG_SERIAL_8250
 	if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
-
-#ifdef CONFIG_EARLY_PRINTK
-		cobalt_early_console();
-#endif
-
+#ifdef CONFIG_SERIAL_8250
 		uart.line	= 0;
 		uart.type	= PORT_UNKNOWN;
 		uart.uartclk	= 18432000;
 		uart.irq	= COBALT_SERIAL_IRQ;
-		uart.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-		uart.iobase	= 0xc800000;
-		uart.iotype	= UPIO_PORT;
+		uart.flags	= UPF_IOREMAP | UPF_BOOT_AUTOCONF |
+				  UPF_SKIP_TEST;
+		uart.iotype	= UPIO_MEM;
+		uart.mapbase	= 0x1c800000;
 
 		early_serial_setup(&uart);
-	}
 #endif
+	}
 }
 
 /*
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index ac1891687520..39e251300c64 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 09:59:39 2006
+# Linux kernel version: 2.6.20
+# Sun Feb 18 21:27:35 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 CONFIG_MIPS_ATLAS=y
@@ -40,8 +39,8 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_BONITO64=y
@@ -129,16 +132,18 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_SMARTMIPS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -149,6 +154,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -161,6 +167,7 @@ CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -179,15 +186,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -195,12 +207,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -218,6 +230,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -260,6 +273,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -273,7 +294,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -281,7 +305,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 # CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -304,10 +327,13 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -349,11 +375,17 @@ CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -365,19 +397,43 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -395,60 +451,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_SECMARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_SIP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_TTL=m
 # CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 CONFIG_IP_NF_RAW=m
@@ -459,6 +500,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_RT=m
@@ -468,6 +510,7 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
@@ -527,13 +570,12 @@ CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -541,6 +583,7 @@ CONFIG_NET_DIVERT=y
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -595,6 +638,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -642,6 +686,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -649,9 +694,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -681,6 +733,8 @@ CONFIG_IDE_GENERIC=y
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -700,14 +754,17 @@ CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
 
 #
 # SCSI low-level drivers
@@ -720,30 +777,39 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -759,6 +825,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -813,6 +880,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -832,6 +901,7 @@ CONFIG_MII=y
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -850,6 +920,7 @@ CONFIG_PCNET32=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 CONFIG_LAN_SAA9730=y
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -868,14 +939,18 @@ CONFIG_LAN_SAA9730=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -915,6 +990,7 @@ CONFIG_LAN_SAA9730=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -995,10 +1071,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -1006,7 +1078,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1031,14 +1102,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1056,6 +1122,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1063,6 +1130,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1125,6 +1198,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1134,6 +1215,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1154,6 +1236,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
@@ -1167,6 +1250,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1174,7 +1258,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1193,11 +1276,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1242,7 +1327,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1299,6 +1383,14 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1308,11 +1400,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1326,18 +1420,30 @@ CONFIG_CMDLINE=""
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1349,6 +1455,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1358,6 +1465,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1369,9 +1477,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
-CONFIG_RIO=n
-CONFIG_I2C_OCORES=n
-CONFIG_DEBUG_RT_MUTEXES=n
-CONFIG_RT_MUTEX_TESTER=n
-CONFIG_DEBUG_RWSEMS=n
-CONFIG_DEBUG_LOCKING_API_SELFTESTS=n
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 9554257c6f3a..4713a13211ce 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc1
-# Wed Oct 11 01:41:41 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:22 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -38,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -78,11 +79,14 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -115,6 +119,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM9000 is not set
 CONFIG_CPU_SB1=y
 CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -150,8 +155,10 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
@@ -166,6 +173,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -185,6 +193,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -193,6 +202,7 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -253,7 +263,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 CONFIG_PCI_DEBUG=y
 CONFIG_MMU=y
 
@@ -273,11 +282,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -292,7 +310,9 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -318,6 +338,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -374,6 +395,7 @@ CONFIG_NETWORK_SECMARK=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -394,6 +416,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -413,6 +436,12 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -455,6 +484,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -464,6 +494,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
@@ -558,14 +589,17 @@ CONFIG_NET_SB1250_MAC=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -627,6 +661,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
@@ -667,10 +702,6 @@ CONFIG_GEN_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -678,7 +709,6 @@ CONFIG_GEN_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -707,6 +737,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 CONFIG_I2C_SIBYTE=y
@@ -743,6 +774,7 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -751,11 +783,6 @@ CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -840,6 +867,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -848,6 +883,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -889,7 +925,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -946,6 +982,10 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Profiling support
@@ -960,23 +1000,25 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
@@ -984,7 +1026,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
 # CONFIG_SB1XXX_CORELIS is not set
 # CONFIG_RUNTIME_DEBUG is not set
 
@@ -1002,8 +1043,9 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -1012,9 +1054,13 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_TWOFISH_COMMON=y
@@ -1029,6 +1075,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1038,6 +1085,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1045,3 +1093,5 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 49590d443712..5e7ae56b1f3c 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:24 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:22 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -70,12 +69,15 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_VICTOR_MPC30X is not set
 CONFIG_ZAO_CAPCELLA=y
 CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -108,6 +110,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -121,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -137,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -149,6 +153,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -167,15 +172,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -183,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -206,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -248,6 +259,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -261,7 +280,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -282,10 +304,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -315,7 +340,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -363,6 +387,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -378,14 +403,22 @@ CONFIG_CONNECTOR=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -414,6 +447,12 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -464,6 +503,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -504,7 +545,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -523,14 +564,18 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -569,6 +614,7 @@ CONFIG_8139TOO_PIO=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -635,10 +681,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
@@ -647,7 +689,6 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -672,14 +713,9 @@ CONFIG_GPIO_VR41XX=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -697,6 +733,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -704,6 +741,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -754,6 +796,7 @@ CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -787,16 +830,26 @@ CONFIG_RTC_DRV_VR41XX=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -807,6 +860,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -826,11 +880,13 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -868,7 +924,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -886,6 +941,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -895,11 +958,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 
@@ -912,7 +977,44 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -921,8 +1023,13 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 0607fc239087..ba593b510b76 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:25 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:24 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,10 +64,14 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
@@ -117,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -134,6 +137,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +150,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -164,15 +169,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -180,12 +190,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -198,6 +208,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -240,6 +251,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -253,7 +272,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -270,10 +292,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -303,7 +328,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -348,7 +372,87 @@ CONFIG_PROC_EVENTS=y
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support
@@ -358,6 +462,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -379,9 +484,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -417,8 +529,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=y
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -428,6 +542,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
+CONFIG_BLK_DEV_TC86C001=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -439,6 +554,12 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -489,6 +610,8 @@ CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -533,14 +656,18 @@ CONFIG_TULIP=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=y
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=y
 
 #
 # Token Ring devices
@@ -579,6 +706,7 @@ CONFIG_TULIP=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -656,10 +784,6 @@ CONFIG_COBALT_LCD=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -667,7 +791,6 @@ CONFIG_COBALT_LCD=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -692,14 +815,9 @@ CONFIG_COBALT_LCD=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -717,6 +835,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -724,6 +843,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -786,6 +910,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -794,11 +926,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -809,6 +943,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -828,22 +963,26 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -866,7 +1005,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -884,6 +1022,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=y
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -893,12 +1039,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -913,7 +1060,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -922,9 +1074,16 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
 CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_CAST5=y
@@ -936,6 +1095,7 @@ CONFIG_CRYPTO_ANUBIS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CAMELLIA=y
 
 #
 # Hardware crypto devices
@@ -944,6 +1104,7 @@ CONFIG_CRYPTO_CRC32C=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -951,3 +1112,5 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 1a57b3375483..0db6a8b37301 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:33 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:24 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,14 +63,19 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1000=y
 CONFIG_SOC_AU1X00=y
@@ -116,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -135,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,15 +171,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -181,12 +192,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -204,6 +215,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -252,6 +264,10 @@ CONFIG_PCMCIA_IOCTL=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -268,7 +284,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -289,10 +308,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -311,15 +333,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -330,14 +379,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -365,7 +417,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -421,11 +472,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -494,6 +547,7 @@ CONFIG_MTD_ALCHEMY=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -510,6 +564,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -519,6 +577,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -562,6 +626,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -616,6 +682,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -635,6 +702,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -714,10 +782,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
@@ -729,7 +793,6 @@ CONFIG_SYNCLINK_CS=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -754,14 +817,9 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -779,6 +837,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -786,6 +845,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -847,6 +911,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -858,6 +930,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -870,6 +943,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -880,6 +954,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -899,23 +974,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -944,7 +1021,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1001,6 +1077,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1010,13 +1094,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1029,18 +1116,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1052,6 +1151,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1061,6 +1161,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1072,3 +1173,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 0055ec41f207..162add97c5ef 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:34 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:24 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,14 +63,19 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1100=y
 CONFIG_SOC_AU1X00=y
@@ -116,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -135,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,15 +171,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -181,12 +192,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -204,6 +215,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -241,6 +253,10 @@ CONFIG_MMU=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -257,7 +273,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -278,10 +297,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -300,15 +322,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -319,14 +368,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -354,7 +406,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -410,11 +461,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -483,6 +536,7 @@ CONFIG_MTD_ALCHEMY=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -499,6 +553,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -508,6 +566,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -551,6 +615,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -592,6 +658,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -611,6 +678,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -687,17 +755,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -722,14 +785,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -744,6 +802,7 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
@@ -786,6 +845,11 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -847,6 +911,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -858,6 +930,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -870,6 +943,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -880,6 +954,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -899,23 +974,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -944,7 +1021,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1001,6 +1077,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1010,13 +1094,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1029,18 +1116,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1052,6 +1151,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1061,6 +1161,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1072,3 +1173,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index c41823b81be0..82801ec43e6a 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:43 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:25 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,14 +63,19 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_COHERENT=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1200=y
 CONFIG_SOC_AU1X00=y
@@ -116,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -135,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,16 +171,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -182,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -251,6 +263,10 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -267,7 +283,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -285,10 +304,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -305,15 +327,41 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -324,14 +372,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -359,7 +410,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -409,11 +459,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -488,6 +540,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -499,14 +552,20 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -540,6 +599,8 @@ CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -559,20 +620,21 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -585,6 +647,11 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_PCMCIA_SYM53C500 is not set
 
 #
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
@@ -672,6 +739,7 @@ CONFIG_MII=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -751,10 +819,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
@@ -766,7 +830,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -782,6 +845,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -790,14 +854,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -812,6 +871,7 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
@@ -843,6 +903,12 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -916,6 +982,14 @@ CONFIG_MMC_AU1X=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -927,6 +1001,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -938,6 +1013,7 @@ CONFIG_JFS_FS=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -948,6 +1024,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -955,7 +1032,6 @@ CONFIG_DNOTIFY=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -974,23 +1050,25 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1025,7 +1103,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=y
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1082,6 +1159,14 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1091,13 +1176,16 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1109,7 +1197,44 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1118,6 +1243,7 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1129,3 +1255,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 7d6d92187880..545f23094e13 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:56 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:26 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,15 +63,20 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1500=y
@@ -118,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -136,7 +140,8 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -149,6 +154,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -167,15 +173,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -183,12 +194,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -206,6 +217,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -259,6 +271,10 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -275,7 +291,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -296,10 +315,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -318,15 +340,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -337,14 +386,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -372,7 +424,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -428,11 +479,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -502,6 +555,7 @@ CONFIG_MTD_ALCHEMY=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -524,9 +578,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -536,6 +597,7 @@ CONFIG_BLK_DEV_IDE=y
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_DELKIN is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -556,6 +618,12 @@ CONFIG_BLK_DEV_IDECS=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -606,6 +674,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -643,14 +713,18 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -683,6 +757,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -702,6 +777,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -780,10 +856,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 
 #
@@ -798,7 +870,6 @@ CONFIG_SYNCLINK_CS=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -823,14 +894,9 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -843,6 +909,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -873,7 +940,6 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # Generic devices
 #
 CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_DUMMY is not set
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
@@ -938,6 +1004,7 @@ CONFIG_SND_MTPAV=m
 # CONFIG_SND_VIA82XX_MODEM is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
 
 #
 # ALSA MIPS devices
@@ -956,18 +1023,28 @@ CONFIG_SND_AU1X00=m
 # CONFIG_SND_PDAUDIOCF is not set
 
 #
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS is not set
 # CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_ES1371 is not set
 # CONFIG_SOUND_ICH is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -982,7 +1059,6 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -992,7 +1068,8 @@ CONFIG_USB=y
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1010,14 +1087,12 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -1033,6 +1108,7 @@ CONFIG_USB_YEALINK=m
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1046,6 +1122,7 @@ CONFIG_USB_YEALINK=m
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1063,18 +1140,21 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_LD=m
+# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB DSL modem support
@@ -1131,6 +1211,14 @@ CONFIG_USB_LD=m
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1142,6 +1230,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1154,6 +1243,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1164,6 +1254,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1183,23 +1274,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -1228,7 +1321,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1285,6 +1377,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1294,13 +1394,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1313,18 +1416,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1336,6 +1451,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1345,6 +1461,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1356,3 +1473,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index c681c91763aa..5bd3b4328e57 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:03:59 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:27 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,15 +63,20 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1550=y
 CONFIG_SOC_AU1X00=y
@@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -135,7 +139,8 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +153,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,15 +172,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -182,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -258,6 +270,10 @@ CONFIG_PCMCIA_AU1X00=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -274,7 +290,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -295,10 +314,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -317,15 +339,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -336,14 +385,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -371,7 +423,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -427,11 +478,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -492,6 +545,7 @@ CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_IDS=m
 CONFIG_MTD_NAND_AU1550=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
@@ -507,6 +561,7 @@ CONFIG_MTD_NAND_AU1550=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -528,9 +583,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -540,6 +602,7 @@ CONFIG_BLK_DEV_IDE=y
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_DELKIN is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -567,8 +630,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -578,6 +643,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -589,6 +655,12 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -639,6 +711,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -676,14 +750,18 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -724,6 +802,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -743,6 +822,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -821,10 +901,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 
 #
@@ -839,7 +915,6 @@ CONFIG_SYNCLINK_CS=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -864,14 +939,9 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -883,6 +953,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -890,6 +961,11 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -952,6 +1028,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -963,6 +1047,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -975,6 +1060,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -985,6 +1071,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1004,23 +1091,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -1049,7 +1138,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1106,6 +1194,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1115,13 +1211,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1134,18 +1233,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1157,6 +1268,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1166,6 +1278,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1177,3 +1290,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index dd4bb0080211..5b502a2013fb 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:00 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:28 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 CONFIG_DDB5477=y
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,10 +64,14 @@ CONFIG_DDB5477=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_DDB5477_BUS_FREQUENCY=0
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_I8259=y
@@ -117,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -134,6 +137,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +150,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -164,15 +169,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -180,12 +190,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -198,6 +208,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -240,6 +251,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -253,7 +272,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -273,10 +295,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -306,7 +331,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -361,6 +385,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -381,6 +406,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -390,6 +421,12 @@ CONFIG_ATA_OVER_ETH=y
 #
 CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -440,6 +477,8 @@ CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -459,6 +498,7 @@ CONFIG_MII=y
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -476,7 +516,7 @@ CONFIG_PCNET32=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -495,14 +535,18 @@ CONFIG_PCNET32=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=y
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=y
 
 #
 # Token Ring devices
@@ -541,6 +585,7 @@ CONFIG_PCNET32=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -618,10 +663,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -629,7 +670,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -654,14 +694,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -679,6 +714,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -686,6 +722,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -748,16 +789,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -787,17 +838,19 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -829,7 +882,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -847,6 +899,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=y
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -856,14 +916,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -876,7 +938,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -885,9 +952,16 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
 CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_CAST5=y
@@ -899,6 +973,7 @@ CONFIG_CRYPTO_ANUBIS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CAMELLIA=y
 
 #
 # Hardware crypto devices
@@ -907,6 +982,7 @@ CONFIG_CRYPTO_CRC32C=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -914,3 +990,5 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 8a31ce4be12c..4bbdab078ff1 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:57:53 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:28 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,10 +64,14 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -116,8 +119,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_WB=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -133,6 +136,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_128=y
@@ -147,6 +151,7 @@ CONFIG_HZ=128
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,13 +170,16 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -246,6 +254,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -260,7 +276,9 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -281,11 +299,13 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -298,10 +318,12 @@ CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 # CONFIG_IPV6_TUNNEL is not set
-CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
 
@@ -375,6 +397,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -389,6 +412,10 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -398,6 +425,7 @@ CONFIG_BLK_DEV_LOOP=m
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -418,6 +446,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
 # SCSI Transports
@@ -502,6 +531,9 @@ CONFIG_DECLANCE=y
 # Wan interfaces
 #
 # CONFIG_WAN is not set
+CONFIG_FDDI=y
+CONFIG_DEFXX=m
+CONFIG_DEFXX_MMIO=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -565,17 +597,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -600,14 +627,9 @@ CONFIG_RTC=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -622,6 +644,7 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
@@ -709,6 +732,14 @@ CONFIG_LOGO_DEC_CLUT224=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -720,6 +751,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -727,6 +759,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -737,6 +770,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -806,7 +840,6 @@ CONFIG_SUNRPC=y
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
 # CONFIG_9P_FS is not set
-CONFIG_GENERIC_ACL=y
 
 #
 # Partition Types
@@ -835,6 +868,14 @@ CONFIG_ULTRIX_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -847,9 +888,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -866,19 +908,24 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_TWOFISH_COMMON=m
@@ -893,6 +940,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -902,6 +950,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -909,3 +958,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 6fa4f914f6e4..b5714a6a5398 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc2
-# Tue Jul 25 23:15:03 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:28 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -70,10 +69,14 @@ CONFIG_CASIO_E55=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -106,6 +109,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -119,8 +123,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -135,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,13 +171,17 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -179,12 +189,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -202,6 +212,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -241,6 +252,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 # CONFIG_NET is not set
@@ -274,6 +293,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -288,9 +308,14 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -319,6 +344,12 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -356,6 +387,7 @@ CONFIG_IDE_GENERIC=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -436,10 +468,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
@@ -447,7 +475,6 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -463,6 +490,7 @@ CONFIG_GPIO_VR41XX=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -471,14 +499,9 @@ CONFIG_GPIO_VR41XX=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -496,6 +519,7 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -503,6 +527,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -563,16 +593,26 @@ CONFIG_DUMMY_CONSOLE=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -582,6 +622,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -601,8 +642,10 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -645,11 +688,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
 
@@ -665,10 +710,6 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
 # CONFIG_CRYPTO is not set
 
 #
-# Hardware crypto devices
-#
-
-#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
@@ -676,3 +717,5 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index 4c9d0405a5df..3044579f171a 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:05 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:29 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MARKEINS=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -116,8 +119,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -134,6 +137,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +151,7 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_PREEMPT_BKL=y
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,17 +171,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -184,12 +194,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -207,6 +217,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -249,6 +260,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -262,7 +281,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -270,7 +292,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 # CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_ROUTE_FWMARK is not set
 CONFIG_IP_ROUTE_MULTIPATH=y
 # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -287,13 +308,16 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -305,11 +329,17 @@ CONFIG_IPV6=m
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+CONFIG_IPV6_MIP6=y
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -318,19 +348,125 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
 
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 # CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -360,7 +496,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -368,6 +503,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -377,6 +513,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -387,7 +524,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -409,11 +546,13 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -485,6 +624,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -504,6 +644,12 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -513,6 +659,8 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
 
 #
@@ -531,14 +679,17 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -551,26 +702,35 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -649,7 +809,7 @@ CONFIG_NATSEMI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -668,14 +828,18 @@ CONFIG_NATSEMI=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -703,6 +867,7 @@ CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
@@ -723,6 +888,7 @@ CONFIG_PPP_DEFLATE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -790,10 +956,6 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -801,7 +963,6 @@ CONFIG_GEN_RTC_X=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -830,6 +991,7 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIS5595 is not set
@@ -865,6 +1027,7 @@ CONFIG_I2C_DEBUG_BUS=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -875,6 +1038,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -898,29 +1062,27 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -932,6 +1094,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -939,6 +1102,11 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1001,6 +1169,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1012,6 +1188,7 @@ CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1023,6 +1200,7 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1033,6 +1211,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1057,11 +1236,13 @@ CONFIG_NTFS_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1073,7 +1254,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1118,7 +1298,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1175,6 +1354,14 @@ CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1184,11 +1371,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
 
@@ -1202,7 +1391,12 @@ CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1211,7 +1405,13 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1225,6 +1425,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1234,10 +1435,17 @@ CONFIG_CRYPTO_DES=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index d5b49735683b..c10e4e063226 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:05 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:30 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MIPS_EV64120=y
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_EV64120=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,10 +64,14 @@ CONFIG_MIPS_EV64120=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_EVB_PCI1 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -118,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -136,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,15 +171,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -182,12 +192,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,6 +215,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -247,6 +258,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -259,7 +278,10 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -279,10 +301,13 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -312,7 +337,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -366,6 +390,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -386,6 +411,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -395,6 +426,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -445,6 +482,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -480,14 +519,18 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -515,6 +558,7 @@ CONFIG_PPP_ASYNC=y
 CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=y
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -534,6 +578,7 @@ CONFIG_PPP_MPPE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -611,10 +656,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -622,7 +663,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -647,14 +687,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -672,6 +707,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -679,6 +715,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -741,16 +782,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -780,17 +831,19 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -819,7 +872,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -837,6 +889,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -846,13 +906,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -865,18 +928,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -888,6 +963,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -897,6 +973,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=m
 CONFIG_CRC32=m
@@ -904,3 +981,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 697140c6562f..460d7a26a8ba 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:09 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:31 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -26,8 +27,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -41,8 +40,8 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,10 +64,14 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -76,6 +79,10 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
 CONFIG_IRQ_CPU_RM9K=y
+CONFIG_MIPS_RM9122=y
+CONFIG_SERIAL_RM9000=y
+CONFIG_GPI_RM9000=y
+CONFIG_WDT_RM9000=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
@@ -101,6 +108,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -117,8 +125,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -136,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -149,6 +158,7 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_PREEMPT_BKL=y
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -168,15 +178,20 @@ CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -184,12 +199,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -207,6 +222,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -249,6 +265,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -262,6 +286,8 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -282,10 +308,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -315,7 +344,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -342,7 +370,7 @@ CONFIG_NETWORK_SECMARK=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -364,11 +392,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -420,6 +450,8 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_BASLER_EXCITE is not set
+# CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
 #
@@ -435,6 +467,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -455,6 +488,12 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -464,6 +503,8 @@ CONFIG_BLK_DEV_LOOP=m
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
 
 #
@@ -482,14 +523,17 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -502,26 +546,35 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -585,14 +638,18 @@ CONFIG_NETDEVICES=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -632,6 +689,7 @@ CONFIG_NETDEVICES=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -707,6 +765,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_WDT_RM9K_GPI=m
 
 #
 # PCI-based Watchdog Cards
@@ -724,10 +783,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -735,7 +790,6 @@ CONFIG_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -751,6 +805,7 @@ CONFIG_WATCHDOG=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -759,14 +814,9 @@ CONFIG_WATCHDOG=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -782,6 +832,7 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
@@ -798,6 +849,7 @@ CONFIG_FB=y
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
@@ -831,6 +883,12 @@ CONFIG_FONT_8x16=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -843,8 +901,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -854,9 +912,11 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -884,14 +944,13 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -913,6 +972,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -927,6 +987,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
@@ -944,19 +1005,22 @@ CONFIG_USB_HIDINPUT=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1014,16 +1078,26 @@ CONFIG_USB_HIDINPUT=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1034,6 +1108,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1056,11 +1131,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1072,7 +1149,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1107,7 +1183,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1179,6 +1254,14 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1188,13 +1271,16 @@ CONFIG_NLS_ISO8859_1=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1206,16 +1292,27 @@ CONFIG_CMDLINE=""
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_XCBC=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 # CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1229,6 +1326,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1238,6 +1336,7 @@ CONFIG_CRYPTO=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1245,3 +1344,5 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index f9812d1e4579..7ec618f3c8b9 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:10 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:32 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,13 +63,18 @@ CONFIG_SGI_IP22=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -123,8 +127,8 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -141,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -153,6 +158,7 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -171,16 +177,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -188,12 +199,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -211,6 +222,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -238,7 +250,6 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -252,6 +263,14 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -265,7 +284,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -286,10 +308,13 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -331,11 +356,17 @@ CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -346,19 +377,43 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -375,60 +430,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_SECMARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_SIP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -439,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_RT=m
@@ -448,6 +489,7 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
@@ -484,7 +526,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -492,6 +533,7 @@ CONFIG_NET_DIVERT=y
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -546,6 +588,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -556,7 +599,6 @@ CONFIG_WIRELESS_EXT=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -577,6 +619,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -592,6 +635,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -601,6 +648,8 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -620,24 +669,30 @@ CONFIG_CHR_DEV_SCH=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
 #
 CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
@@ -679,6 +734,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -730,6 +787,7 @@ CONFIG_SGISEEQ=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -752,6 +810,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_SERIAL=m
@@ -815,10 +874,6 @@ CONFIG_SGI_DS1286=m
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 
@@ -826,7 +881,6 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -851,14 +905,9 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -887,6 +936,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -894,6 +944,12 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -954,6 +1010,14 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -963,6 +1027,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -974,6 +1039,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -987,6 +1053,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -994,7 +1061,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1013,17 +1079,20 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1142,6 +1211,14 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1151,11 +1228,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1170,18 +1249,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1193,6 +1284,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1202,6 +1294,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=m
@@ -1213,3 +1306,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f21186c12d81..9ddc3eff4793 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:10 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:32 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -70,10 +69,14 @@ CONFIG_SGI_SN_M_MODE=y
 # CONFIG_REPLICATE_EXHANDLERS is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_ARC=y
 CONFIG_DMA_IP27=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -121,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -145,8 +148,10 @@ CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS_DEFAULT_64=y
 CONFIG_NR_CPUS=64
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
@@ -162,6 +167,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -180,17 +186,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -198,12 +209,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -222,6 +233,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -263,11 +275,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -281,7 +302,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -302,10 +326,13 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -335,7 +362,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -343,6 +369,7 @@ CONFIG_NETWORK_SECMARK=y
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -374,6 +401,7 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
@@ -427,6 +455,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -448,6 +477,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -457,6 +492,8 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -476,14 +513,17 @@ CONFIG_CHR_DEV_SCH=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -496,24 +536,33 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -529,6 +578,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -583,6 +633,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -619,14 +671,18 @@ CONFIG_SGI_IOC3_ETH=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -724,10 +780,6 @@ CONFIG_SGI_IP27_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -735,7 +787,6 @@ CONFIG_SGI_IP27_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -760,14 +811,9 @@ CONFIG_SGI_IP27_RTC=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -779,6 +825,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -848,6 +895,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -859,6 +914,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 CONFIG_JBD_DEBUG=y
 CONFIG_FS_MBCACHE=y
@@ -870,6 +926,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -881,6 +938,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -900,17 +958,20 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -942,7 +1003,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -975,6 +1035,14 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -984,13 +1052,16 @@ CONFIG_SGI_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1003,7 +1074,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1012,9 +1088,16 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1026,6 +1109,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1035,6 +1119,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1042,3 +1127,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 61e069a0f1aa..8fc18809d5ff 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:11 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:33 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,15 +63,17 @@ CONFIG_SGI_IP32=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
-CONFIG_DMA_IP32=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_OWN_DMA=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -124,8 +125,8 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -141,6 +142,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -153,6 +155,7 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -171,16 +174,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -188,12 +196,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -206,6 +214,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -246,11 +255,20 @@ CONFIG_BINFMT_MISC=y
 # CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
 # CONFIG_MIPS32_N32 is not set
 CONFIG_BINFMT_ELF32=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -264,7 +282,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -284,10 +305,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -317,7 +341,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -372,6 +395,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -393,6 +417,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -402,6 +432,8 @@ CONFIG_ATA_OVER_ETH=y
 #
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -421,14 +453,17 @@ CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_LIBSAS=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -446,24 +481,33 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=y
+# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -517,6 +561,8 @@ CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -553,14 +599,18 @@ CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=y
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=y
 
 #
 # Token Ring devices
@@ -600,6 +650,7 @@ CONFIG_SGI_O2MACE_ETH=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -678,10 +729,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -689,7 +736,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -714,14 +760,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -739,6 +780,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -746,6 +788,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -808,16 +856,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -828,6 +886,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -847,17 +906,20 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -888,7 +950,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -917,6 +978,14 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=y
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -926,12 +995,13 @@ CONFIG_SGI_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -946,7 +1016,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -955,9 +1030,16 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
 CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_CAST5=y
@@ -969,6 +1051,7 @@ CONFIG_CRYPTO_ANUBIS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CAMELLIA=y
 
 #
 # Hardware crypto devices
@@ -977,6 +1060,7 @@ CONFIG_CRYPTO_CRC32C=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -984,3 +1068,5 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 88966666f4c6..083104daa2ca 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:12 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:33 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MOMENCO_JAGUAR_ATX=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,10 +64,14 @@ CONFIG_MOMENCO_JAGUAR_ATX=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_JAGUAR_DMALOW=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_LIMITED_DMA=y
@@ -106,6 +109,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -124,8 +128,8 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -141,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -171,14 +176,19 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -186,12 +196,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -208,6 +218,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -249,6 +260,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -277,13 +296,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -294,6 +315,8 @@ CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
@@ -351,6 +374,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -369,6 +393,11 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -378,6 +407,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -428,6 +463,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -475,22 +512,23 @@ CONFIG_EEPRO100=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-CONFIG_MV643XX_ETH_2=y
+CONFIG_QLA3XXX=m
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -574,10 +612,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -608,14 +642,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -627,6 +656,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -695,14 +725,23 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -712,6 +751,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -731,8 +771,10 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -752,6 +794,7 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -759,7 +802,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 
@@ -779,13 +821,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -798,6 +843,10 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
@@ -807,9 +856,14 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -821,6 +875,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -830,6 +885,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=m
@@ -837,3 +893,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 835764d834f7..9331cb0a19b1 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc1
-# Sun Oct  8 19:03:07 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:33 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -38,8 +39,8 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -65,11 +66,14 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_MIPS_MAGNUM_4000 is not set
 CONFIG_OLIVETTI_M700=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_ARC=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
@@ -140,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -152,6 +157,7 @@ CONFIG_HZ=100
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -171,6 +177,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
@@ -179,8 +186,8 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -257,6 +264,14 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -271,7 +286,9 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -298,6 +315,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -317,8 +335,8 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_SUBTREES is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
@@ -331,16 +349,39 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -362,25 +403,13 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_SECMARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -391,26 +420,25 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_SIP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -424,6 +452,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_RT=m
@@ -433,6 +462,7 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
@@ -502,6 +532,7 @@ CONFIG_LLC=m
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -614,13 +645,13 @@ CONFIG_PARPORT_1284=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
 #
 CONFIG_BLK_DEV_FD=m
 CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
 
 #
 # Parallel IDE high-level drivers
@@ -665,6 +696,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -674,6 +709,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
 CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -694,6 +730,7 @@ CONFIG_BLK_DEV_SR_VENDOR=y
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
 # SCSI Transports
@@ -802,6 +839,7 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -832,7 +870,6 @@ CONFIG_NET_PCI=y
 # CONFIG_AC3200 is not set
 # CONFIG_APRICOT is not set
 # CONFIG_CS89x0 is not set
-# CONFIG_LAN_SAA9730 is not set
 # CONFIG_NET_POCKET is not set
 
 #
@@ -972,17 +1009,12 @@ CONFIG_RTC=m
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1019,11 +1051,6 @@ CONFIG_W1_CON=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1054,6 +1081,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -1114,6 +1147,15 @@ CONFIG_DUMMY_CONSOLE=y
 #
 
 #
+# Auxiliary Display support
+#
+# CONFIG_KS0108 is not set
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1123,6 +1165,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1158,7 +1201,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1185,7 +1227,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1321,6 +1363,10 @@ CONFIG_NLS_UTF8=m
 #
 # Distributed Lock Manager
 #
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Profiling support
@@ -1335,9 +1381,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1355,19 +1402,24 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_TWOFISH_COMMON=m
@@ -1382,6 +1434,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1391,6 +1444,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1402,3 +1456,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 50fd9557e646..068e48ec7093 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:12 2006
+# Linux kernel version: 2.6.21-rc3
+# Thu Mar 15 00:40:40 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,15 +63,20 @@ CONFIG_TOSHIBA_JMR3927=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -114,8 +118,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -130,19 +134,20 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RTC_DS1742=y
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -161,28 +166,34 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
+# CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -195,6 +206,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -206,11 +218,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -222,12 +234,10 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
 #
-# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -237,6 +247,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -248,9 +263,7 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
+# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -268,16 +281,18 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -303,7 +318,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -319,13 +333,7 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -336,14 +344,12 @@ CONFIG_WIRELESS_EXT=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
 #
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -358,6 +364,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -371,11 +378,14 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -385,8 +395,14 @@ CONFIG_ATA_OVER_ETH=y
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=y
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -425,24 +441,13 @@ CONFIG_NETDEVICES=y
 #
 # PHY device support
 #
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -454,7 +459,27 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_TC35815=y
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -470,16 +495,21 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -518,14 +548,12 @@ CONFIG_NET_ETHERNET=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -543,21 +571,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -565,6 +585,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
@@ -584,10 +605,12 @@ CONFIG_SERIAL_NONSTANDARD=y
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
-# CONFIG_SERIAL_TXX9_CONSOLE is not set
-# CONFIG_SERIAL_TXX9_STDSERIAL is not set
+CONFIG_SERIAL_TXX9_NR_UARTS=6
+CONFIG_SERIAL_TXX9_CONSOLE=y
+CONFIG_SERIAL_TXX9_STDSERIAL=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
@@ -608,10 +631,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -619,7 +638,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -644,14 +662,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -661,49 +679,8 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
 
 #
 # Sound
@@ -711,6 +688,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -757,7 +739,28 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # Real Time Clock
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_DS1742=y
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # DMA Engine support
@@ -773,14 +776,24 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -790,7 +803,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -810,6 +823,7 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -849,7 +863,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -867,6 +880,11 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -876,61 +894,35 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index 05f539f84f58..fd4272c1458a 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:12 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:34 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 CONFIG_LASAT=y
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_LASAT=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -68,10 +67,14 @@ CONFIG_PICVUE_PROC=y
 CONFIG_DS1603=y
 CONFIG_LASAT_SYSCTL=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_NILE4=y
@@ -121,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -139,6 +142,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,6 +155,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -169,15 +174,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -185,12 +195,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -208,6 +218,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -250,6 +261,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -262,7 +281,10 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -279,10 +301,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -312,7 +337,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -367,11 +391,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -441,6 +467,7 @@ CONFIG_MTD_LASAT=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -461,9 +488,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -500,8 +534,10 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -511,6 +547,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -522,6 +559,12 @@ CONFIG_IDEDMA_AUTO=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -572,6 +615,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -607,14 +652,18 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -653,6 +702,7 @@ CONFIG_NET_ETHERNET=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -730,10 +780,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -741,7 +787,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -766,14 +811,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -791,6 +831,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -798,6 +839,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -860,6 +906,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -869,13 +923,15 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -886,6 +942,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -905,23 +962,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
@@ -947,7 +1006,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -965,6 +1023,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -974,11 +1040,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -993,18 +1061,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1016,6 +1096,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1025,6 +1106,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1032,3 +1114,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 96e941084c04..1f64d7632a03 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc1
-# Fri Oct  6 17:34:55 2006
+# Linux kernel version: 2.6.20
+# Sun Feb 18 21:27:55 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -38,8 +39,8 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -62,11 +63,14 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -132,14 +136,15 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_MIPS_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT_DISABLED is not set
-# CONFIG_MIPS_MT_SMTC is not set
 CONFIG_MIPS_MT_SMP=y
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_MIPS_MT=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_MIPSR2_SRS=y
 CONFIG_CPU_HAS_SYNC=y
@@ -147,6 +152,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_SMARTMIPS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -157,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS=2
@@ -173,6 +180,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -192,6 +200,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -199,8 +208,8 @@ CONFIG_SYSVIPC=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -259,7 +268,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 CONFIG_MMU=y
 
 #
@@ -280,6 +288,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -294,7 +310,9 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -302,7 +320,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 # CONFIG_IP_FIB_TRIE is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -331,6 +348,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -379,8 +397,8 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_SUBTREES is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
@@ -393,15 +411,37 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
@@ -425,25 +465,13 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_SECMARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -454,26 +482,25 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_SIP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -487,6 +514,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_RT=m
@@ -496,6 +524,7 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
@@ -568,6 +597,7 @@ CONFIG_IPDDP_DECAP=y
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -655,6 +685,7 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -718,6 +749,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # NAND Flash Device Drivers
 #
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
 
 #
 # OneNAND Flash Device Drivers
@@ -757,6 +789,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -801,6 +839,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -810,6 +849,7 @@ CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -821,6 +861,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
+CONFIG_SCSI_TGT=m
 CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -841,6 +882,7 @@ CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
 # SCSI Transports
@@ -889,6 +931,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -964,6 +1007,7 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -1002,7 +1046,7 @@ CONFIG_PCNET32=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -1022,14 +1066,17 @@ CONFIG_PCNET32=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -1146,10 +1193,6 @@ CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -1157,7 +1200,6 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1182,11 +1224,6 @@ CONFIG_RTC=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1215,6 +1252,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1277,6 +1320,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1286,6 +1337,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1327,7 +1379,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1365,6 +1416,20 @@ CONFIG_BEFS_FS=m
 # CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 # CONFIG_HPFS_FS is not set
@@ -1470,9 +1535,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1489,19 +1555,24 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_TWOFISH_COMMON=m
@@ -1516,6 +1587,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1525,6 +1597,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1536,3 +1609,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 03efcfd0503b..a2db5c201216 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:13 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:35 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_SIM=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MIPS_SIM=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -117,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -136,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,15 +171,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -183,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -206,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
 
@@ -244,6 +255,13 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -257,7 +275,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -286,10 +307,13 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -324,7 +348,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -332,6 +355,7 @@ CONFIG_NET_DIVERT=y
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -377,6 +401,7 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -389,6 +414,7 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -409,6 +435,7 @@ CONFIG_NET_ESTIMATOR=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -423,6 +450,10 @@ CONFIG_BLK_DEV_NBD=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -432,6 +463,12 @@ CONFIG_BLK_DEV_NBD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -468,7 +505,6 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
-# CONFIG_MIPS_SIM_NET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -512,6 +548,7 @@ CONFIG_NETDEVICES=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -579,17 +616,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -605,6 +637,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -613,14 +646,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -639,6 +667,11 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -699,16 +732,26 @@ CONFIG_VIDEO_V4L2=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 # CONFIG_INOTIFY is not set
@@ -736,6 +779,7 @@ CONFIG_ROMFS_FS=y
 #
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -776,7 +820,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -794,6 +837,10 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -803,29 +850,34 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
@@ -838,7 +890,12 @@ CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -847,7 +904,13 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 # CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -861,6 +924,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -870,8 +934,11 @@ CONFIG_CRYPTO_MD5=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index e4221aafbc4c..ad5c0bf87b2b 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc2
-# Tue Jul 25 23:16:46 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:35 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -71,10 +70,14 @@ CONFIG_VICTOR_MPC30X=y
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -107,6 +110,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -120,8 +124,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -136,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +153,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,16 +172,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -183,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -206,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -261,6 +272,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -274,7 +293,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -292,10 +314,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -325,7 +350,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -380,6 +404,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -399,9 +424,16 @@ CONFIG_CONNECTOR=m
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -431,6 +463,12 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -492,14 +530,18 @@ CONFIG_MII=m
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -594,6 +636,7 @@ CONFIG_PCMCIA_AXNET=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -665,10 +708,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 
 #
@@ -684,7 +723,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -709,14 +747,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -735,6 +768,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -742,6 +776,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -754,8 +794,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -764,7 +804,8 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -782,7 +823,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -807,6 +847,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -820,6 +861,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=m
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
@@ -837,18 +879,21 @@ CONFIG_USB_PEGASUS=m
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -906,16 +951,26 @@ CONFIG_USB_PEGASUS=m
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -945,17 +1000,19 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1000,6 +1057,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1009,11 +1074,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
 
@@ -1028,18 +1095,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1051,6 +1130,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1060,6 +1140,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1067,3 +1148,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index 32b1afdd1c20..28547313ce13 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:15 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:35 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MOMENCO_OCELOT_3=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MOMENCO_OCELOT_3=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -104,6 +107,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -122,8 +126,8 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -141,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -153,6 +158,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -171,16 +177,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -188,12 +199,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -211,6 +222,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -253,6 +265,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -266,7 +286,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -283,13 +306,16 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -302,11 +328,17 @@ CONFIG_IPV6_ROUTE_INFO=y
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+CONFIG_IPV6_MIP6=y
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -317,15 +349,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -336,14 +395,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -351,6 +413,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
 
@@ -377,7 +440,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -401,6 +463,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -432,6 +495,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -451,6 +515,12 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -460,6 +530,8 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -478,14 +550,17 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -498,26 +573,35 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -571,6 +655,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -607,7 +693,7 @@ CONFIG_E100=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -627,17 +713,18 @@ CONFIG_E100=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-CONFIG_MV643XX_ETH_2=y
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -665,6 +752,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
@@ -685,6 +773,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -758,10 +847,6 @@ CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -769,7 +854,6 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -794,14 +878,9 @@ CONFIG_RTC=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -816,6 +895,7 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
@@ -832,6 +912,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
@@ -868,6 +949,12 @@ CONFIG_LOGO_LINUX_CLUT224=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -930,6 +1017,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -939,6 +1034,7 @@ CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -947,12 +1043,13 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -963,6 +1060,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -982,11 +1080,13 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1029,7 +1129,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1086,6 +1185,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1095,11 +1202,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any root=nfs"
 
@@ -1113,18 +1222,30 @@ CONFIG_CMDLINE="ip=any root=nfs"
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1136,6 +1257,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1145,6 +1267,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1156,3 +1279,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index ebe75c1c71af..82ff6fc0cd41 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:16 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:36 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 CONFIG_MOMENCO_OCELOT_C=y
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MOMENCO_OCELOT_C=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -120,8 +123,8 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -138,6 +141,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -150,6 +154,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -168,15 +173,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -184,12 +194,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -202,6 +212,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -242,11 +253,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
 CONFIG_MIPS32_N32=y
 CONFIG_BINFMT_ELF32=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -259,7 +279,10 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -279,10 +302,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -312,7 +338,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -367,6 +392,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -387,6 +413,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -396,6 +428,12 @@ CONFIG_ATA_OVER_ETH=y
 #
 CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -446,6 +484,8 @@ CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -482,14 +522,18 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_MV643XX_ETH is not set
+CONFIG_QLA3XXX=y
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=y
 
 #
 # Token Ring devices
@@ -528,6 +572,7 @@ CONFIG_NET_ETHERNET=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -605,10 +650,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -616,7 +657,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -641,14 +681,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -666,6 +701,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -673,6 +709,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -735,16 +776,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -755,6 +806,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -774,17 +826,20 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -816,7 +871,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -834,6 +888,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=y
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -843,12 +905,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -863,7 +926,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -872,9 +940,16 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
 CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_CAST5=y
@@ -886,6 +961,7 @@ CONFIG_CRYPTO_ANUBIS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CAMELLIA=y
 
 #
 # Hardware crypto devices
@@ -894,6 +970,7 @@ CONFIG_CRYPTO_CRC32C=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -901,3 +978,5 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index 5a9603c12902..15a027e00eec 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:16 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:36 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MOMENCO_OCELOT=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MOMENCO_OCELOT=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -123,8 +126,8 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -142,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -154,6 +158,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -172,15 +177,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -188,12 +198,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -206,6 +216,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -233,7 +244,6 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -247,6 +257,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -259,7 +277,10 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -279,10 +300,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -312,7 +336,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -345,7 +368,6 @@ CONFIG_WIRELESS_EXT=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -367,6 +389,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -382,6 +405,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -391,6 +418,12 @@ CONFIG_ATA_OVER_ETH=y
 #
 CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -434,6 +467,8 @@ CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -484,6 +519,7 @@ CONFIG_NET_ETHERNET=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -557,17 +593,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -592,14 +623,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -617,6 +643,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -624,6 +651,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -684,16 +716,26 @@ CONFIG_DUMMY_CONSOLE=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -704,6 +746,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -723,17 +766,20 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -765,7 +811,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -783,6 +828,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=y
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -792,14 +845,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -812,7 +867,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +881,16 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
 CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_CAST5=y
@@ -835,6 +902,7 @@ CONFIG_CRYPTO_ANUBIS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CAMELLIA=y
 
 #
 # Hardware crypto devices
@@ -843,6 +911,7 @@ CONFIG_CRYPTO_CRC32C=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -850,3 +919,5 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index 46a942c253cf..7078e6b3ea11 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:16 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:36 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 CONFIG_MOMENCO_OCELOT_G=y
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MOMENCO_OCELOT_G=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -106,15 +109,14 @@ CONFIG_CPU_RM7000=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_RM7000=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
@@ -123,9 +125,10 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
+# CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -141,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -153,6 +157,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -171,15 +176,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -187,12 +197,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,7 +215,10 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
 
 #
 # IO Schedulers
@@ -242,12 +255,15 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -262,7 +278,10 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -282,10 +301,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -315,7 +337,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -370,6 +391,7 @@ CONFIG_PROC_EVENTS=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -390,6 +412,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=y
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=y
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -399,6 +427,12 @@ CONFIG_ATA_OVER_ETH=y
 #
 CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -449,6 +483,8 @@ CONFIG_LXT_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -485,14 +521,18 @@ CONFIG_GALILEO_64240_ETH=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=y
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=y
 
 #
 # Token Ring devices
@@ -531,6 +571,7 @@ CONFIG_GALILEO_64240_ETH=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -608,10 +649,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -619,7 +656,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -644,14 +680,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -669,6 +700,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -676,6 +708,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -738,16 +775,26 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -758,6 +805,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -777,17 +825,20 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=y
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -819,7 +870,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -837,6 +887,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=y
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -846,12 +904,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -866,7 +925,12 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
@@ -875,9 +939,16 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
 CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
 CONFIG_CRYPTO_SERPENT=y
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_CAST5=y
@@ -889,6 +960,7 @@ CONFIG_CRYPTO_ANUBIS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CAMELLIA=y
 
 #
 # Hardware crypto devices
@@ -897,6 +969,7 @@ CONFIG_CRYPTO_CRC32C=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -904,3 +977,5 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 7d3c688181d5..69678d99ae61 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:17 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:37 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,14 +63,19 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1100=y
 CONFIG_SOC_AU1X00=y
@@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -136,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +153,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,15 +172,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -182,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -253,6 +265,10 @@ CONFIG_PCMCIA_IOCTL=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -269,7 +285,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -290,10 +309,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -312,15 +334,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -331,14 +380,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -366,7 +418,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -422,11 +473,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -495,6 +548,7 @@ CONFIG_MTD_ALCHEMY=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -511,6 +565,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -520,6 +578,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -563,6 +627,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -609,6 +675,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -628,6 +695,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -707,10 +775,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
@@ -722,7 +786,6 @@ CONFIG_SYNCLINK_CS=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -747,14 +810,9 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -772,6 +830,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -779,6 +838,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -840,6 +904,14 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -851,6 +923,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -863,6 +936,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -873,6 +947,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -892,23 +967,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -937,7 +1014,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -994,6 +1070,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1003,13 +1087,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1022,18 +1109,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1045,6 +1144,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1054,6 +1154,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1065,3 +1166,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index a77805af0819..070672799dac 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:17 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:37 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,14 +63,19 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1500=y
 CONFIG_SOC_AU1X00=y
@@ -116,8 +120,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -134,7 +138,8 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,15 +171,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -181,12 +192,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -204,6 +215,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -258,6 +270,10 @@ CONFIG_PCCARD_NONSTATIC=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -274,7 +290,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -295,10 +314,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -317,15 +339,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -336,14 +385,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -371,7 +423,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -427,11 +478,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -501,6 +554,7 @@ CONFIG_MTD_ALCHEMY=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -522,9 +576,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -534,6 +595,7 @@ CONFIG_BLK_DEV_IDE=y
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_DELKIN is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -561,8 +623,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -572,6 +636,7 @@ CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -583,6 +648,12 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -633,6 +704,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -670,14 +743,18 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -718,6 +795,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -737,6 +815,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -815,10 +894,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 
 #
@@ -833,7 +908,6 @@ CONFIG_SYNCLINK_CS=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -858,14 +932,9 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -877,6 +946,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -884,6 +954,11 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -946,6 +1021,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -957,6 +1040,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -969,6 +1053,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -979,6 +1064,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -998,23 +1084,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -1043,7 +1131,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1100,6 +1187,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1109,13 +1204,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1128,18 +1226,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1151,6 +1261,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1160,6 +1271,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1171,3 +1283,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 8318d74d6adb..354e49b7a5f1 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:17 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:37 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,15 +63,20 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SOC_AU1550=y
 CONFIG_SOC_AU1X00=y
@@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_64BIT_PHYS_ADDR=y
 CONFIG_CPU_HAS_LLSC=y
@@ -135,7 +139,8 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +153,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -166,15 +172,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -182,12 +193,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,6 +216,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -259,6 +271,10 @@ CONFIG_PCCARD_NONSTATIC=m
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
 # CONFIG_PM is not set
 
 #
@@ -275,7 +291,10 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -296,10 +315,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -318,15 +340,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -337,14 +386,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -372,7 +424,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -428,11 +479,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -502,6 +555,7 @@ CONFIG_MTD_ALCHEMY=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -523,9 +577,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -535,6 +596,7 @@ CONFIG_BLK_DEV_IDE=y
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_DELKIN is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -562,8 +624,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -573,6 +637,7 @@ CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -584,6 +649,12 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -634,6 +705,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -671,14 +744,18 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -711,6 +788,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -730,6 +808,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -808,10 +887,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 
 #
@@ -826,7 +901,6 @@ CONFIG_SYNCLINK_CS=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -851,14 +925,9 @@ CONFIG_SYNCLINK_CS=m
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -870,6 +939,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -877,6 +947,11 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -939,6 +1014,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -950,6 +1033,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -962,6 +1046,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -972,6 +1057,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -991,23 +1077,25 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
@@ -1036,7 +1124,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1093,6 +1180,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1102,13 +1197,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1121,18 +1219,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1144,6 +1254,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1153,6 +1264,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1164,3 +1276,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index fcb8fea3052c..fae16c5ec521 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc2
-# Sat Oct 14 23:01:16 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:38 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -38,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 CONFIG_PNX8550_JBS=y
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -62,11 +63,14 @@ CONFIG_PNX8550_JBS=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -134,6 +138,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -146,6 +151,7 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,6 +171,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -172,6 +179,7 @@ CONFIG_SYSVIPC=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -231,7 +239,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_MMU=y
 
@@ -253,6 +260,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -267,6 +282,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -293,6 +309,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -350,6 +367,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -370,6 +388,7 @@ CONFIG_FW_LOADER=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -393,6 +412,12 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -436,6 +461,7 @@ CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -445,6 +471,7 @@ CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -456,6 +483,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
 CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -475,6 +503,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
 # SCSI Transports
@@ -518,6 +547,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -605,7 +635,7 @@ CONFIG_8139TOO_8129=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -625,14 +655,17 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -720,7 +753,10 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_IP3106 is not set
+CONFIG_SERIAL_PNX8XXX=y
+CONFIG_SERIAL_PNX8XXX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -741,10 +777,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -752,7 +784,6 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -768,6 +799,7 @@ CONFIG_HW_RANDOM=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -776,15 +808,11 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -814,6 +842,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -826,8 +859,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -836,7 +869,8 @@ CONFIG_USB=y
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -890,7 +924,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -905,6 +939,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -927,6 +962,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -935,6 +971,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB DSL modem support
@@ -991,6 +1028,14 @@ CONFIG_USB_MON=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1041,7 +1086,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1137,6 +1182,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1149,33 +1202,35 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_KGDB is not set
+CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
@@ -1189,21 +1244,27 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_XCBC=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 # CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1217,6 +1278,7 @@ CONFIG_CRYPTO_CBC=m
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1226,8 +1288,11 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index f38a2c123037..cd821e52181d 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 16:35:12 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:38 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -38,7 +39,6 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
 CONFIG_PNX8550_STB810=y
 # CONFIG_DDB5477 is not set
@@ -58,17 +58,19 @@ CONFIG_PNX8550_STB810=y
 # CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_KEXEC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -136,6 +138,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +151,7 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -167,6 +171,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -234,7 +239,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_MMU=y
 
@@ -254,6 +258,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -268,6 +280,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -351,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -371,6 +385,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -443,6 +458,7 @@ CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -452,6 +468,7 @@ CONFIG_BLK_DEV_HPT366=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -463,6 +480,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -482,6 +500,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
 # SCSI Transports
@@ -525,6 +544,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -608,6 +628,7 @@ CONFIG_NATSEMI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -627,11 +648,13 @@ CONFIG_NATSEMI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
@@ -775,6 +798,7 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -808,6 +832,11 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -820,9 +849,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -831,7 +859,8 @@ CONFIG_USB=y
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -885,6 +914,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -922,6 +952,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -987,6 +1018,14 @@ CONFIG_USB_MON=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1037,7 +1076,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1133,6 +1172,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1145,33 +1192,35 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
-CONFIG_HEADERS_CHECK=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_KGDB is not set
+CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
@@ -1187,8 +1236,10 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_XCBC=m
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
@@ -1197,9 +1248,13 @@ CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 # CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1213,6 +1268,7 @@ CONFIG_CRYPTO_CBC=m
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1222,8 +1278,11 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index aa61f0f030a5..8e8d03157954 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:18 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:39 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,16 +63,21 @@ CONFIG_QEMU=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_COHERENT=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_HAVE_STD_PC_SERIAL_PORT=y
@@ -117,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -130,9 +134,10 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_128 is not set
@@ -164,12 +169,15 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -194,6 +202,7 @@ CONFIG_BASE_SMALL=1
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -221,7 +230,6 @@ CONFIG_I8253=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -235,6 +243,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -268,10 +284,12 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -307,7 +325,6 @@ CONFIG_NETWORK_SECMARK=y
 #
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -330,6 +347,7 @@ CONFIG_PROC_EVENTS=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -343,6 +361,10 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -352,6 +374,12 @@ CONFIG_PROC_EVENTS=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -459,6 +487,7 @@ CONFIG_NE2000=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -525,10 +554,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -558,14 +583,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -585,6 +605,7 @@ CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -592,6 +613,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -651,14 +678,23 @@ CONFIG_DUMMY_CONSOLE=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -668,6 +704,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -687,8 +724,10 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -709,6 +748,7 @@ CONFIG_RAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_DIRECTIO=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -717,7 +757,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 
@@ -737,12 +776,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -758,13 +798,12 @@ CONFIG_CMDLINE=""
 # CONFIG_CRYPTO is not set
 
 #
-# Hardware crypto devices
-#
-
-#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index f9e8f41d17f2..29e0df9f4be0 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:19 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:39 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -71,10 +70,14 @@ CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_GENERIC_ISA_DMA=y
@@ -126,8 +129,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
@@ -143,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -155,6 +159,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -173,16 +178,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -211,6 +222,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -254,6 +266,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -267,6 +287,8 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -285,13 +307,16 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -304,11 +329,17 @@ CONFIG_IPV6_ROUTE_INFO=y
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+CONFIG_IPV6_MIP6=y
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 # CONFIG_IPV6_TUNNEL is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -319,15 +350,42 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -338,14 +396,17 @@ CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-# CONFIG_IP_NF_CONNTRACK is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -353,6 +414,7 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
 
@@ -379,7 +441,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -404,6 +465,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -436,11 +498,13 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,6 +574,7 @@ CONFIG_MTD_CFI_UTIL=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -527,14 +592,22 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -570,8 +643,10 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -581,6 +656,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 # CONFIG_IDE_CHIPSETS is not set
 CONFIG_BLK_DEV_IDEDMA=y
@@ -593,6 +669,12 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -648,6 +730,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -702,7 +786,7 @@ CONFIG_NET_PCI=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -721,14 +805,18 @@ CONFIG_NET_PCI=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -785,6 +873,7 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -804,6 +893,7 @@ CONFIG_PPPOE=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -826,6 +916,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -868,6 +959,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
+CONFIG_SERIAL_TXX9_NR_UARTS=6
 # CONFIG_SERIAL_TXX9_CONSOLE is not set
 # CONFIG_SERIAL_TXX9_STDSERIAL is not set
 # CONFIG_SERIAL_JSM is not set
@@ -890,10 +982,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -901,7 +989,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -926,17 +1013,14 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -952,6 +1036,7 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
@@ -971,6 +1056,7 @@ CONFIG_FB_ATY=y
 CONFIG_FB_ATY_CT=y
 # CONFIG_FB_ATY_GENERIC_LCD is not set
 # CONFIG_FB_ATY_GX is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
@@ -1002,6 +1088,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1014,8 +1106,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1040,14 +1132,12 @@ CONFIG_USB=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
@@ -1063,6 +1153,7 @@ CONFIG_USB_YEALINK=m
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1076,6 +1167,7 @@ CONFIG_USB_YEALINK=m
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1093,18 +1185,21 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB DSL modem support
@@ -1161,6 +1256,14 @@ CONFIG_USB_MON=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1170,6 +1273,7 @@ CONFIG_EXT3_FS=m
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1178,12 +1282,13 @@ CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1194,6 +1299,7 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1218,11 +1324,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1234,7 +1342,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1273,7 +1380,6 @@ CONFIG_SUNRPC=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1330,6 +1436,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1339,13 +1453,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
@@ -1357,18 +1474,30 @@ CONFIG_CMDLINE=""
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1380,6 +1509,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1389,6 +1519,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1399,3 +1530,5 @@ CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 496aa67b9f82..5593cde9f74c 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:19 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:40 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_SNI_RM=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
@@ -78,10 +81,10 @@ CONFIG_I8259=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_ARC32=y
 CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
 CONFIG_ARC_CONSOLE=y
 CONFIG_ARC_MEMORY=y
 CONFIG_ARC_PROMLIB=y
@@ -110,6 +113,7 @@ CONFIG_CPU_R4X00=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_R4X00=y
 CONFIG_SYS_HAS_CPU_R5000=y
+CONFIG_SYS_HAS_CPU_R10000=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -127,8 +131,8 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -146,6 +150,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -158,6 +163,7 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -176,17 +182,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -194,12 +205,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -217,6 +228,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -263,6 +275,14 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -276,7 +296,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -297,10 +320,13 @@ CONFIG_IP_PIMSM_V2=y
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -313,11 +339,17 @@ CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -329,18 +361,43 @@ CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -358,60 +415,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_SECMARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_SIP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -422,6 +464,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_RT=m
@@ -431,6 +474,7 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
@@ -493,7 +537,6 @@ CONFIG_LLC=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -501,6 +544,7 @@ CONFIG_LLC=m
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -575,6 +619,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -606,22 +651,22 @@ CONFIG_PARPORT_PC=m
 CONFIG_PARPORT_SERIAL=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
 
 #
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
 #
 CONFIG_BLK_DEV_FD=m
 CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
 
 #
 # Parallel IDE high-level drivers
@@ -664,6 +709,7 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -671,6 +717,12 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -680,6 +732,8 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -699,14 +753,17 @@ CONFIG_BLK_DEV_SR_VENDOR=y
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -720,14 +777,16 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
 CONFIG_MEGARAID_NEWGEN=y
 CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
@@ -742,17 +801,19 @@ CONFIG_SCSI_IMM=m
 # CONFIG_SCSI_IZIP_EPP16 is not set
 # CONFIG_SCSI_IZIP_SLOW_CTR is not set
 # CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SNI_53C710 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
@@ -760,6 +821,12 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -780,6 +847,7 @@ CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 # CONFIG_DM_CRYPT is not set
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -834,6 +902,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -868,6 +938,7 @@ CONFIG_NE2000=m
 # CONFIG_SEEQ8005 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_AC3200 is not set
@@ -888,7 +959,7 @@ CONFIG_EEPRO100=m
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
 
 #
@@ -908,14 +979,18 @@ CONFIG_EEPRO100=m
 CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -956,6 +1031,7 @@ CONFIG_PLIP=m
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
 
 #
 # Userland interfaces
@@ -978,6 +1054,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -1051,10 +1128,6 @@ CONFIG_RTC=m
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -1062,7 +1135,6 @@ CONFIG_RTC=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1101,14 +1173,9 @@ CONFIG_W1_CON=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1129,6 +1196,7 @@ CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1136,6 +1204,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1148,8 +1222,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1159,9 +1233,11 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
@@ -1189,18 +1265,20 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 CONFIG_HID_FF=y
 CONFIG_HID_PID=y
 CONFIG_LOGITECH_FF=y
+# CONFIG_PANTHERLORD_FF is not set
 CONFIG_THRUSTMASTER_FF=y
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_HIDDEV=y
 
 #
@@ -1220,6 +1298,7 @@ CONFIG_USB_XPAD=m
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1234,12 +1313,14 @@ CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
 # CONFIG_USB_NET_GL620A is not set
 CONFIG_USB_NET_NET1080=m
 # CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_USB_NET_ZAURUS=m
@@ -1255,8 +1336,8 @@ CONFIG_USB_USS720=m
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
 CONFIG_USB_SERIAL_AIRPRIME=m
-CONFIG_USB_SERIAL_ANYDATA=m
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
@@ -1290,16 +1371,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
 
 #
@@ -1307,20 +1392,23 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_SISUSBVGA=m
 # CONFIG_USB_SISUSBVGA_CON is not set
 CONFIG_USB_LD=m
+# CONFIG_USB_TRANCEVIBRATOR is not set
 CONFIG_USB_TEST=m
 
 #
@@ -1378,6 +1466,15 @@ CONFIG_USB_TEST=m
 #
 
 #
+# Auxiliary Display support
+#
+# CONFIG_KS0108 is not set
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -1387,6 +1484,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1403,6 +1501,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 CONFIG_ROMFS_FS=m
@@ -1414,6 +1513,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1421,7 +1521,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1442,11 +1541,13 @@ CONFIG_NTFS_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1454,6 +1555,7 @@ CONFIG_RAMFS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
+# CONFIG_ECRYPT_FS is not set
 CONFIG_HFS_FS=m
 # CONFIG_HFSPLUS_FS is not set
 CONFIG_BEFS_FS=m
@@ -1579,6 +1681,14 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1588,11 +1698,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1607,18 +1719,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1630,6 +1754,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1639,6 +1764,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -1650,3 +1776,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index e33c17200b39..6c4f09a381e2 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:19 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:40 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -81,10 +80,14 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -117,6 +120,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM9000 is not set
 CONFIG_CPU_SB1=y
 CONFIG_SYS_HAS_CPU_SB1=y
+CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -134,8 +138,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_SIBYTE_DMA_PAGEOPS is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_SB1_PASS_1_WORKAROUNDS=y
 CONFIG_CPU_HAS_LLSC=y
@@ -155,8 +159,10 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS_DEFAULT_2=y
 CONFIG_NR_CPUS=2
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
@@ -171,6 +177,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -189,16 +196,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -206,12 +219,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -230,6 +243,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -270,11 +284,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_MIPS32_O32=y
 # CONFIG_MIPS32_N32 is not set
 CONFIG_BINFMT_ELF32=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -288,7 +311,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -308,10 +334,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -341,7 +370,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -395,6 +423,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -410,6 +439,7 @@ CONFIG_CONNECTOR=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=9220
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -417,9 +447,16 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -449,6 +486,12 @@ CONFIG_IDE_GENERIC=y
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -499,6 +542,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -535,14 +580,18 @@ CONFIG_NET_SB1250_MAC=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -604,6 +653,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
@@ -643,10 +693,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -654,7 +700,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -679,14 +724,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -698,6 +738,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -767,6 +808,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -775,11 +824,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -809,17 +860,19 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -850,7 +903,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -868,6 +920,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -877,13 +937,16 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
+CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
@@ -897,18 +960,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -920,6 +995,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -929,6 +1005,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=y
@@ -936,3 +1013,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index 83fb932f9d4b..988b9cdef01f 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:20 2006
+# Linux kernel version: 2.6.20
+# Sun Feb 18 21:28:10 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -120,15 +123,17 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_SMARTMIPS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -139,6 +144,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,6 +157,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -169,13 +176,18 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -183,12 +195,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -201,6 +213,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -226,7 +239,6 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -240,6 +252,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 # CONFIG_NET is not set
@@ -253,7 +273,6 @@ CONFIG_TRAD_SIGNALS=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -283,10 +302,15 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=18432
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -296,6 +320,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 CONFIG_RAID_ATTRS=y
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -373,17 +403,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -399,6 +424,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -407,14 +433,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -425,6 +446,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -492,16 +514,26 @@ CONFIG_VIDEO_V4L2=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -530,6 +562,7 @@ CONFIG_FUSE_FS=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -585,12 +618,13 @@ CONFIG_PARTITION_ADVANCED=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -606,10 +640,6 @@ CONFIG_CMDLINE=""
 # CONFIG_CRYPTO is not set
 
 #
-# Hardware crypto devices
-#
-
-#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
@@ -617,3 +647,5 @@ CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index e9d4eae45bfa..b5be8b74d896 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:20 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:41 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -72,12 +71,15 @@ CONFIG_TANBAC_TB0226=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -110,6 +112,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -123,8 +126,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -139,6 +142,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,6 +155,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -169,15 +174,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -185,12 +195,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -208,6 +218,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -250,6 +261,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -263,6 +282,8 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -290,10 +311,13 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -323,7 +347,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -340,6 +363,7 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -371,6 +395,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -388,11 +413,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -402,6 +434,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -420,14 +454,17 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
 
 #
 # SCSI low-level drivers
@@ -440,26 +477,35 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC94XX=m
+# CONFIG_AIC94XX_DEBUG is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -513,6 +559,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -549,7 +597,7 @@ CONFIG_E100=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -568,14 +616,18 @@ CONFIG_E100=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -615,6 +667,7 @@ CONFIG_E100=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -682,10 +735,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_TANBAC_TB0219 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
@@ -694,7 +743,6 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -719,14 +767,9 @@ CONFIG_GPIO_VR41XX=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -745,6 +788,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -752,6 +796,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -764,8 +814,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -775,9 +825,11 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -805,6 +857,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -829,6 +882,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -843,6 +897,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
@@ -860,19 +915,22 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -918,6 +976,7 @@ CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -951,16 +1010,26 @@ CONFIG_RTC_DRV_VR41XX=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
@@ -971,6 +1040,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -990,11 +1060,13 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1036,7 +1108,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1054,6 +1125,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1063,11 +1142,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 
@@ -1080,7 +1161,44 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1092,6 +1210,9 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index c19597fb0c32..1756d2bdf6b8 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:20 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:41 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -72,12 +71,15 @@ CONFIG_TANBAC_TB022X=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_PCI_VR41XX=y
-# CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -110,6 +112,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -123,8 +126,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -139,6 +142,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,6 +155,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -169,15 +174,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -185,12 +195,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -208,6 +218,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -250,6 +261,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -263,6 +282,8 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -291,10 +312,13 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -324,7 +348,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -341,6 +364,7 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -372,6 +396,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -389,11 +414,18 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -403,6 +435,12 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -453,6 +491,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -489,14 +529,18 @@ CONFIG_R8169=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -535,6 +579,7 @@ CONFIG_R8169=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -602,10 +647,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 CONFIG_TANBAC_TB0219=y
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
@@ -614,7 +655,6 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -630,6 +670,7 @@ CONFIG_GPIO_VR41XX=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -638,14 +679,9 @@ CONFIG_GPIO_VR41XX=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -664,6 +700,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -671,6 +708,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -683,8 +726,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -694,9 +737,11 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -714,7 +759,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -739,6 +783,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -752,6 +797,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -769,19 +815,22 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -827,6 +876,7 @@ CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -860,16 +910,26 @@ CONFIG_RTC_DRV_VR41XX=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
@@ -880,6 +940,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -899,11 +960,13 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -945,7 +1008,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -963,6 +1025,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -972,11 +1042,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
@@ -989,7 +1061,44 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -998,9 +1107,13 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 97d94f96990f..8bb6be4342b6 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc2
-# Wed Oct 18 12:57:11 2006
+# Linux kernel version: 2.6.21-rc1
+# Thu Feb 22 10:38:09 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -38,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -71,11 +72,14 @@ CONFIG_TANBAC_TB0287=y
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -108,6 +112,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -137,6 +142,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -149,6 +155,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -168,14 +175,15 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -233,7 +241,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 CONFIG_MMU=y
 
 #
@@ -252,6 +259,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -266,6 +281,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -315,6 +331,7 @@ CONFIG_DEFAULT_BIC=y
 # CONFIG_DEFAULT_WESTWOOD is not set
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="bic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -391,6 +408,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -414,6 +432,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -423,6 +447,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -442,6 +467,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
 # SCSI Transports
@@ -486,11 +512,13 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
 #
 CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
@@ -506,6 +534,7 @@ CONFIG_ATA=y
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -521,8 +550,10 @@ CONFIG_ATA=y
 # CONFIG_PATA_HPT3X2N is not set
 # CONFIG_PATA_HPT3X3 is not set
 # CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
@@ -539,6 +570,7 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -562,10 +594,8 @@ CONFIG_IEEE1394=m
 # Subsystem Options
 #
 # CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
 CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
 CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
 
 #
 # Device Drivers
@@ -645,14 +675,17 @@ CONFIG_R8169=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -760,10 +793,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_TANBAC_TB0219 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
@@ -787,6 +816,7 @@ CONFIG_GPIO_VR41XX=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -795,9 +825,9 @@ CONFIG_GPIO_VR41XX=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
-# CONFIG_TIFM_CORE is not set
+CONFIG_MFD_SM501=y
 
 #
 # Multimedia devices
@@ -813,15 +843,22 @@ CONFIG_GPIO_VR41XX=y
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -834,14 +871,16 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-CONFIG_FB_SMIVGX=y
+# CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_TRIDENT is not set
+CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -855,7 +894,6 @@ CONFIG_DUMMY_CONSOLE=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -863,6 +901,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -875,8 +919,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -886,9 +930,11 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -923,7 +969,6 @@ CONFIG_USB_STORAGE=m
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -945,7 +990,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -960,6 +1005,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -982,6 +1028,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -991,6 +1038,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB DSL modem support
@@ -1047,6 +1095,14 @@ CONFIG_USB_MON=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1105,7 +1161,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -1159,6 +1215,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1171,10 +1235,10 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
@@ -1187,14 +1251,59 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 553734a47b62..8f019ffcc71b 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc2
-# Tue Jul 25 23:13:04 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:42 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 CONFIG_MACH_VR41XX=y
 # CONFIG_PMC_YOSEMITE is not set
@@ -70,10 +69,14 @@ CONFIG_IBM_WORKPAD=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -106,6 +109,7 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -119,8 +123,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -135,6 +139,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -147,6 +152,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -165,16 +171,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -182,12 +192,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -205,6 +215,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -257,6 +268,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -270,7 +289,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -288,10 +310,13 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -321,7 +346,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -371,6 +395,7 @@ CONFIG_CONNECTOR=m
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -387,9 +412,14 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -419,6 +449,12 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -472,6 +508,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -575,6 +613,7 @@ CONFIG_PCMCIA_AXNET=m
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -641,10 +680,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
@@ -657,7 +692,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -682,14 +716,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -708,6 +737,7 @@ CONFIG_VIDEO_V4L2=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -715,6 +745,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -775,6 +811,14 @@ CONFIG_DUMMY_CONSOLE=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -783,11 +827,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -798,6 +844,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -817,11 +864,13 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -875,6 +924,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -884,11 +941,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
 
@@ -901,7 +960,44 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -910,8 +1006,13 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index d3dfb702bb7c..52b48c0715d3 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:21 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:42 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_WR_PPMC=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,10 +63,14 @@ CONFIG_WR_PPMC=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -124,8 +127,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -143,6 +146,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -155,6 +159,7 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -173,16 +178,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
@@ -190,12 +201,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -213,6 +224,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -258,6 +270,14 @@ CONFIG_BINFMT_MISC=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -271,6 +291,8 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -294,10 +316,13 @@ CONFIG_ARPD=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -327,7 +352,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -375,6 +399,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -390,11 +415,18 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -404,6 +436,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -454,6 +492,8 @@ CONFIG_PHYLIB=y
 # CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -490,7 +530,7 @@ CONFIG_E100=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_SC92031 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -509,14 +549,18 @@ CONFIG_E100=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_QLA3XXX=m
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -602,10 +646,6 @@ CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -613,7 +653,6 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -629,6 +668,7 @@ CONFIG_RTC=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -637,17 +677,14 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -659,6 +696,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -728,14 +766,24 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -746,6 +794,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -765,11 +814,13 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -806,7 +857,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -824,6 +874,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -833,11 +891,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
 
@@ -850,7 +910,44 @@ CONFIG_CMDLINE="console=ttyS0,115200n8"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -859,8 +956,13 @@ CONFIG_CMDLINE="console=ttyS0,115200n8"
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index b9f74d6745ee..6824606309e5 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:21 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:42 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 CONFIG_PMC_YOSEMITE=y
@@ -65,10 +64,14 @@ CONFIG_PMC_YOSEMITE=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_HYPERTRANSPORT is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -102,6 +105,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_CPU_RM9000=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_RM9000=y
+CONFIG_WEAK_ORDERING=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
@@ -118,8 +122,8 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -136,6 +140,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS=2
@@ -170,15 +175,20 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -187,12 +197,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -210,6 +220,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -252,6 +263,14 @@ CONFIG_BINFMT_ELF=y
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -281,13 +300,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
@@ -298,6 +319,8 @@ CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
@@ -336,6 +359,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -356,6 +380,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -374,6 +399,11 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+CONFIG_SGI_IOC4=m
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -383,6 +413,12 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -433,6 +469,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -463,18 +501,22 @@ CONFIG_MII=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_TITAN_GE=y
+CONFIG_QLA3XXX=m
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+CONFIG_NETXEN_NIC=m
 
 #
 # Token Ring devices
@@ -559,10 +601,6 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -593,14 +631,9 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -612,6 +645,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -680,14 +714,23 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -697,6 +740,7 @@ CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -716,8 +760,10 @@ CONFIG_FUSE_FS=m
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -737,6 +783,7 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
+# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -744,7 +791,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 
@@ -764,31 +810,38 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_KGDB is not set
+CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
@@ -802,6 +855,10 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
@@ -811,9 +868,14 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -825,6 +887,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -834,6 +897,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=m
@@ -841,3 +905,5 @@ CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile
index ea68815ad17a..23fd3b81fe1a 100644
--- a/arch/mips/ddb5xxx/ddb5477/Makefile
+++ b/arch/mips/ddb5xxx/ddb5477/Makefile
@@ -6,5 +6,3 @@ obj-y	 		+= irq.o irq_5477.o setup.o lcd44780.o
 
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
index 2b23234a5b95..faa4a506bf82 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq.c
@@ -194,7 +194,7 @@ static void vrc5477_irq_dispatch(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_cause() & read_c0_status();
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
 		do_IRQ(CPU_IRQ_BASE + 7);
diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index 8b790c2900d5..9eb2f9c036aa 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -8,5 +8,3 @@ obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_TC)		+= tc.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/dec/prom/Makefile b/arch/mips/dec/prom/Makefile
index bcd0247b3a66..064ae7a76bdc 100644
--- a/arch/mips/dec/prom/Makefile
+++ b/arch/mips/dec/prom/Makefile
@@ -7,5 +7,3 @@ lib-y			+= init.o memory.o cmdline.o identify.o console.o
 
 lib-$(CONFIG_32BIT)	+= locore.o
 lib-$(CONFIG_64BIT)	+= call_o32.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/dec/prom/console.c b/arch/mips/dec/prom/console.c
index cade16ec7e5a..65419bf32441 100644
--- a/arch/mips/dec/prom/console.c
+++ b/arch/mips/dec/prom/console.c
@@ -16,40 +16,12 @@
 
 #include <asm/dec/prom.h>
 
-static void __init prom_console_write(struct console *con, const char *s,
-				      unsigned int c)
+void prom_putchar(char c)
 {
-	static char sfmt[] __initdata = "%%%us";
-	char fmt[13];
+	char s[2];
 
-	snprintf(fmt, sizeof(fmt), sfmt, c);
-	prom_printf(fmt, s);
-}
-
-static struct console promcons __initdata = {
-	.name	= "prom",
-	.write	= prom_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1,
-};
-
-static int promcons_output __initdata = 0;
-
-void __init register_prom_console(void)
-{
-	if (!promcons_output) {
-		promcons_output = 1;
-		register_console(&promcons);
-	}
-}
+	s[0] = c;
+	s[1] = '\0';
 
-void __init unregister_prom_console(void)
-{
-	if (promcons_output) {
-		unregister_console(&promcons);
-		promcons_output = 0;
-	}
+	prom_printf( s);
 }
-
-void disable_early_printk(void)
-	__attribute__((alias("unregister_prom_console")));
diff --git a/arch/mips/dec/prom/identify.c b/arch/mips/dec/prom/identify.c
index c4e3c1ea0d48..cd85924e2572 100644
--- a/arch/mips/dec/prom/identify.c
+++ b/arch/mips/dec/prom/identify.c
@@ -26,9 +26,6 @@
 
 #include "dectypes.h"
 
-extern unsigned long mips_machgroup;
-extern unsigned long mips_machtype;
-
 static const char *dec_system_strings[] = {
 	[MACH_DSUNKNOWN]	"unknown DECstation",
 	[MACH_DS23100]		"DECstation 2100/3100",
diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c
index bf2858071f1f..a217aafe59f6 100644
--- a/arch/mips/dec/prom/init.c
+++ b/arch/mips/dec/prom/init.c
@@ -103,9 +103,6 @@ void __init prom_init(void)
 	if (prom_is_rex(magic))
 		rex_clear_cache();
 
-	/* Register the early console.  */
-	register_prom_console();
-
 	/* Were we compiled with the right CPU option? */
 #if defined(CONFIG_CPU_R3000)
 	if ((current_cpu_data.cputype == CPU_R4000SC) ||
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index f9812d1e4579..41211f8b7738 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Thu Jul  6 10:04:10 2006
+# Linux kernel version: 2.6.20
+# Tue Feb 20 21:47:14 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_MTX1 is not set
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_PB1000 is not set
@@ -25,8 +26,6 @@ CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
@@ -40,8 +39,8 @@ CONFIG_MIPS=y
 # CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
 # CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
@@ -64,13 +63,18 @@ CONFIG_SGI_IP22=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -123,8 +127,8 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -141,6 +145,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -153,6 +158,7 @@ CONFIG_HZ=1000
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -171,16 +177,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
@@ -188,12 +199,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -211,6 +222,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -238,7 +250,6 @@ CONFIG_MMU=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # PCI Hotplug Support
@@ -252,6 +263,14 @@ CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -265,7 +284,10 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
@@ -286,10 +308,13 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
 
 #
 # IP: Virtual Server Configuration
@@ -331,11 +356,17 @@ CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=y
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -346,19 +377,43 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -375,60 +430,45 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_SECMARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-CONFIG_IP_NF_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
-CONFIG_IP_NF_NAT_SIP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -439,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_RT=m
@@ -448,6 +489,7 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
@@ -484,7 +526,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -492,6 +533,7 @@ CONFIG_NET_DIVERT=y
 # QoS and/or fair queueing
 #
 CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
@@ -546,6 +588,7 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_FIB_RULES=y
 
 #
 # Device Drivers
@@ -556,7 +599,6 @@ CONFIG_WIRELESS_EXT=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -577,6 +619,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -592,6 +635,10 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_ATA_OVER_ETH=m
 
 #
+# Misc devices
+#
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -601,6 +648,8 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -620,24 +669,30 @@ CONFIG_CHR_DEV_SCH=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
 #
 CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 # CONFIG_MD is not set
@@ -679,6 +734,8 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -730,6 +787,7 @@ CONFIG_SGISEEQ=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -752,6 +810,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_SERIAL=m
@@ -815,10 +874,6 @@ CONFIG_SGI_DS1286=m
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
 
@@ -826,7 +881,6 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -851,14 +905,9 @@ CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -887,6 +936,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -894,6 +944,12 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -954,6 +1010,14 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=m
@@ -963,6 +1027,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -974,6 +1039,7 @@ CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -987,6 +1053,7 @@ CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -994,7 +1061,6 @@ CONFIG_FUSE_FS=m
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -1013,17 +1079,20 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1142,6 +1211,14 @@ CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
+# CONFIG_DLM_DEBUG is not set
+
+#
 # Profiling support
 #
 # CONFIG_PROFILING is not set
@@ -1151,11 +1228,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1170,18 +1249,30 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -1193,6 +1284,7 @@ CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1202,6 +1294,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
 CONFIG_CRC32=m
@@ -1213,3 +1306,5 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/emma2rh/common/irq.c b/arch/mips/emma2rh/common/irq.c
index c191b3e9d9d9..d95604773667 100644
--- a/arch/mips/emma2rh/common/irq.c
+++ b/arch/mips/emma2rh/common/irq.c
@@ -27,7 +27,6 @@
 #include <linux/irq.h>
 #include <linux/types.h>
 
-#include <asm/i8259.h>
 #include <asm/system.h>
 #include <asm/mipsregs.h>
 #include <asm/debug.h>
diff --git a/arch/mips/emma2rh/markeins/irq.c b/arch/mips/emma2rh/markeins/irq.c
index 3299b6dfe764..6bcf6a06367a 100644
--- a/arch/mips/emma2rh/markeins/irq.c
+++ b/arch/mips/emma2rh/markeins/irq.c
@@ -29,7 +29,6 @@
 #include <linux/ptrace.h>
 #include <linux/delay.h>
 
-#include <asm/i8259.h>
 #include <asm/irq_cpu.h>
 #include <asm/system.h>
 #include <asm/mipsregs.h>
@@ -116,7 +115,7 @@ void __init arch_init_irq(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-        unsigned int pending = read_c0_status() & read_c0_cause();
+        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
 		do_IRQ(CPU_IRQ_BASE + 7);
diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile
index b2c53a8f8718..323b2cebc691 100644
--- a/arch/mips/gt64120/ev64120/Makefile
+++ b/arch/mips/gt64120/ev64120/Makefile
@@ -7,5 +7,3 @@
 #
 
 obj-y	+= irq.o promcon.o reset.o serialGT.o setup.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c
index 04572b9c9642..64e4c80b6139 100644
--- a/arch/mips/gt64120/ev64120/irq.c
+++ b/arch/mips/gt64120/ev64120/irq.c
@@ -48,7 +48,7 @@
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP4)		/* int2 hardware line (timer) */
 		do_IRQ(4);
diff --git a/arch/mips/gt64120/ev64120/promcon.c b/arch/mips/gt64120/ev64120/promcon.c
index b5937c4ba7db..6e0ecfed9640 100644
--- a/arch/mips/gt64120/ev64120/promcon.c
+++ b/arch/mips/gt64120/ev64120/promcon.c
@@ -24,11 +24,6 @@ static void prom_console_write(struct console *co, const char *s,
 	}
 }
 
-int prom_getchar(void)
-{
-	return 0;
-}
-
 static struct console sercons = {
     .name	= "ttyS",
     .write	= prom_console_write,
diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile
index 6f708df8373b..9f9a33fc76b9 100644
--- a/arch/mips/gt64120/momenco_ocelot/Makefile
+++ b/arch/mips/gt64120/momenco_ocelot/Makefile
@@ -5,5 +5,3 @@
 obj-y	 		+= irq.o prom.o reset.o setup.o
 
 obj-$(CONFIG_KGDB)	+= dbg_io.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/momenco_ocelot/prom.c b/arch/mips/gt64120/momenco_ocelot/prom.c
index 78f393b2afd9..c71c85276c74 100644
--- a/arch/mips/gt64120/momenco_ocelot/prom.c
+++ b/arch/mips/gt64120/momenco_ocelot/prom.c
@@ -32,7 +32,6 @@ void __init prom_init(void)
 	char **arg = (char **) fw_arg1;
 	char **env = (char **) fw_arg2;
 	struct callvectors *cv = (struct callvectors *) fw_arg3;
-	uint32_t tmp;
 	int i;
 
 	/* save the PROM vectors for debugging use */
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
index 94f94ebbda6c..98b6fb38096d 100644
--- a/arch/mips/gt64120/momenco_ocelot/setup.c
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -79,7 +79,7 @@ static char reset_reason;
 static void __init setup_l3cache(unsigned long size);
 
 /* setup code for a handoff from a version 1 PMON 2000 PROM */
-void PMON_v1_setup()
+static void PMON_v1_setup(void)
 {
 	/* A wired TLB entry for the GT64120A and the serial port. The
 	   GT64120A is going to be hit on every IRQ anyway - there's
diff --git a/arch/mips/gt64120/wrppmc/Makefile b/arch/mips/gt64120/wrppmc/Makefile
index 7cf52205511c..e4250435ad89 100644
--- a/arch/mips/gt64120/wrppmc/Makefile
+++ b/arch/mips/gt64120/wrppmc/Makefile
@@ -10,5 +10,3 @@
 #
 
 obj-y += irq.o reset.o setup.o time.o pci.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/wrppmc/irq.c b/arch/mips/gt64120/wrppmc/irq.c
index d3d96591780e..06177bf5b1d6 100644
--- a/arch/mips/gt64120/wrppmc/irq.c
+++ b/arch/mips/gt64120/wrppmc/irq.c
@@ -32,7 +32,7 @@
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
 		do_IRQ(WRPPMC_MIPS_TIMER_IRQ);	/* CPU Compare/Count internal timer */
diff --git a/arch/mips/gt64120/wrppmc/pci.c b/arch/mips/gt64120/wrppmc/pci.c
index 2fbe93467f78..0d5289bc1804 100644
--- a/arch/mips/gt64120/wrppmc/pci.c
+++ b/arch/mips/gt64120/wrppmc/pci.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <asm/gt64120.h>
 
-extern struct pci_ops gt64120_pci_ops;
+extern struct pci_ops gt64xxx_pci0_ops;
 
 static struct resource pci0_io_resource = {
 	.name  = "pci_0 io",
@@ -30,7 +30,7 @@ static struct resource pci0_mem_resource = {
 };
 
 static struct pci_controller hose_0 = {
-	.pci_ops	= &gt64120_pci_ops,
+	.pci_ops	= &gt64xxx_pci0_ops,
 	.io_resource	= &pci0_io_resource,
 	.mem_resource	= &pci0_mem_resource,
 };
diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile
index 02bd39add891..dd9d99bfcf7a 100644
--- a/arch/mips/jazz/Makefile
+++ b/arch/mips/jazz/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	 	:= irq.o jazzdma.o reset.o setup.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index 295892e4ce53..015cf4bb51dd 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -122,7 +122,7 @@ static void ll_local_dev(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	unsigned int pending = read_c0_cause() & read_c0_status();
 
 	if (pending & IE_IRQ5)
 		write_c0_compare(0);
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index 46e421e14348..e8e0ffb9354d 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -67,7 +67,8 @@ void __init vdma_init(void)
 	 * aligned and should be uncached to avoid cache flushing after every
 	 * update.
 	 */
-	vdma_pagetable_start = alloc_bootmem_low_pages(VDMA_PGTBL_SIZE);
+	vdma_pagetable_start =
+		(unsigned long) alloc_bootmem_low_pages(VDMA_PGTBL_SIZE);
 	if (!vdma_pagetable_start)
 		BUG();
 	dma_cache_wback_inv(vdma_pagetable_start, VDMA_PGTBL_SIZE);
diff --git a/arch/mips/jmr3927/common/Makefile b/arch/mips/jmr3927/common/Makefile
index cb09a8eede15..01e7db19bcbe 100644
--- a/arch/mips/jmr3927/common/Makefile
+++ b/arch/mips/jmr3927/common/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the common code of TOSHIBA JMR-TX3927 board
 #
 
-obj-y	 += prom.o puts.o rtc_ds1742.o
+obj-y	 += prom.o puts.o
diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c
index aa481b774c42..5398813e50e6 100644
--- a/arch/mips/jmr3927/common/prom.c
+++ b/arch/mips/jmr3927/common/prom.c
@@ -41,16 +41,6 @@
 
 #include <asm/bootinfo.h>
 
-extern int prom_argc;
-extern char **prom_argv, **prom_envp;
-
-typedef struct
-{
-    char *name;
-/*    char *val; */
-}t_env_var;
-
-
 char * __init prom_getcmdline(void)
 {
 	return &(arcs_cmdline[0]);
@@ -60,6 +50,8 @@ void  __init prom_init_cmdline(void)
 {
 	char *cp;
 	int actr;
+	int prom_argc = fw_arg0;
+	char **prom_argv = (char **) fw_arg1;
 
 	actr = 1; /* Always ignore argv[0] */
 
diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c
index 1c1cad9cd078..c611ab497888 100644
--- a/arch/mips/jmr3927/common/puts.c
+++ b/arch/mips/jmr3927/common/puts.c
@@ -32,137 +32,29 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/types.h>
-#include <asm/jmr3927/txx927.h>
 #include <asm/jmr3927/tx3927.h>
-#include <asm/jmr3927/jmr3927.h>
 
 #define TIMEOUT       0xffffff
-#define SLOW_DOWN
-
-static const char digits[16] = "0123456789abcdef";
-
-#ifdef SLOW_DOWN
-#define slow_down() { int k; for (k=0; k<10000; k++); }
-#else
-#define slow_down()
-#endif
 
 void
-putch(const unsigned char c)
+prom_putchar(char c)
 {
         int i = 0;
 
         do {
-            slow_down();
             i++;
-            if (i>TIMEOUT) {
+            if (i>TIMEOUT)
                 break;
-            }
         } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
 	tx3927_sioptr(1)->tfifo = c;
 	return;
 }
 
-unsigned char getch(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(1)->dicr;
-	tx3927_sioptr(1)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(1)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(1)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(1)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(1)->dicr = dicr;
-
-	return c;
-}
-void
-do_jmr3927_led_set(char n)
-{
-    /* and with current leds */
-    jmr3927_led_and_set(n);
-}
-
 void
-puts(unsigned char *cp)
+puts(const char *cp)
 {
-    int i = 0;
-
-    while (*cp) {
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = *cp++;
-    }
-    putch('\r');
-    putch('\n');
-}
-
-void
-fputs(unsigned char *cp)
-{
-    int i = 0;
-
-    while (*cp) {
-        do {
-             slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = *cp++;
-    }
-}
-
-
-void
-put64(uint64_t ul)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 16;            /* 16 nibbles in a 64 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 8;            /* 8 nibbles in a 32 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(u >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
+    while (*cp)
+	prom_putchar(*cp++);
+    prom_putchar('\r');
+    prom_putchar('\n');
 }
diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c
deleted file mode 100644
index e6561345d12a..000000000000
--- a/arch/mips/jmr3927/common/rtc_ds1742.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * arch/mips/jmr3927/common/rtc_ds1742.c
- * Based on arch/mips/ddb5xxx/common/rtc_ds1386.c
- *     low-level RTC hookups for s for Dallas 1742 chip.
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/*
- * This file exports a function, rtc_ds1386_init(), which expects an
- * uncached base address as the argument.  It will set the two function
- * pointers expected by the MIPS generic timer code.
- */
-
-#include <linux/bcd.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/rtc.h>
-#include <linux/ds1742rtc.h>
-
-#include <asm/time.h>
-#include <asm/addrspace.h>
-
-#include <asm/debug.h>
-
-#define	EPOCH		2000
-
-static unsigned long rtc_base;
-
-static unsigned long
-rtc_ds1742_get_time(void)
-{
-	unsigned int year, month, day, hour, minute, second;
-	unsigned int century;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_write(RTC_READ, RTC_CONTROL);
-	second = BCD2BIN(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
-	minute = BCD2BIN(rtc_read(RTC_MINUTES));
-	hour = BCD2BIN(rtc_read(RTC_HOURS));
-	day = BCD2BIN(rtc_read(RTC_DATE));
-	month = BCD2BIN(rtc_read(RTC_MONTH));
-	year = BCD2BIN(rtc_read(RTC_YEAR));
-	century = BCD2BIN(rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK);
-	rtc_write(0, RTC_CONTROL);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	year += century * 100;
-
-	return mktime(year, month, day, hour, minute, second);
-}
-extern void to_tm(unsigned long tim, struct rtc_time * tm);
-
-static int
-rtc_ds1742_set_time(unsigned long t)
-{
-	struct rtc_time tm;
-	u8 year, month, day, hour, minute, second;
-	u8 cmos_year, cmos_month, cmos_day, cmos_hour, cmos_minute, cmos_second;
-	int cmos_century;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_write(RTC_READ, RTC_CONTROL);
-	cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
-	cmos_minute = (u8)rtc_read(RTC_MINUTES);
-	cmos_hour = (u8)rtc_read(RTC_HOURS);
-	cmos_day = (u8)rtc_read(RTC_DATE);
-	cmos_month = (u8)rtc_read(RTC_MONTH);
-	cmos_year = (u8)rtc_read(RTC_YEAR);
-	cmos_century = rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK;
-
-	rtc_write(RTC_WRITE, RTC_CONTROL);
-
-	/* convert */
-	to_tm(t, &tm);
-
-	/* check each field one by one */
-	year = BIN2BCD(tm.tm_year - EPOCH);
-	if (year != cmos_year) {
-		rtc_write(year,RTC_YEAR);
-	}
-
-	month = BIN2BCD(tm.tm_mon);
-	if (month != (cmos_month & 0x1f)) {
-		rtc_write((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH);
-	}
-
-	day = BIN2BCD(tm.tm_mday);
-	if (day != cmos_day) {
-
-		rtc_write(day, RTC_DATE);
-	}
-
-	if (cmos_hour & 0x40) {
-		/* 12 hour format */
-		hour = 0x40;
-		if (tm.tm_hour > 12) {
-			hour |= 0x20 | (BIN2BCD(hour-12) & 0x1f);
-		} else {
-			hour |= BIN2BCD(tm.tm_hour);
-		}
-	} else {
-		/* 24 hour format */
-		hour = BIN2BCD(tm.tm_hour) & 0x3f;
-	}
-	if (hour != cmos_hour) rtc_write(hour, RTC_HOURS);
-
-	minute = BIN2BCD(tm.tm_min);
-	if (minute !=  cmos_minute) {
-		rtc_write(minute, RTC_MINUTES);
-	}
-
-	second = BIN2BCD(tm.tm_sec);
-	if (second !=  cmos_second) {
-		rtc_write(second & RTC_SECONDS_MASK,RTC_SECONDS);
-	}
-
-	/* RTC_CENTURY and RTC_CONTROL share same address... */
-	rtc_write(cmos_century, RTC_CONTROL);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void
-rtc_ds1742_init(unsigned long base)
-{
-	u8  cmos_second;
-
-	/* remember the base */
-	rtc_base = base;
-	db_assert((rtc_base & 0xe0000000) == KSEG1);
-
-	/* set the function pointers */
-	rtc_mips_get_time = rtc_ds1742_get_time;
-	rtc_mips_set_time = rtc_ds1742_set_time;
-
-	/* clear oscillator stop bit */
-	rtc_write(RTC_READ, RTC_CONTROL);
-	cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
-	rtc_write(RTC_WRITE, RTC_CONTROL);
-	rtc_write(cmos_second, RTC_SECONDS); /* clear msb */
-	rtc_write(0, RTC_CONTROL);
-}
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile
index baf5077813c1..8d00ba460cef 100644
--- a/arch/mips/jmr3927/rbhma3100/Makefile
+++ b/arch/mips/jmr3927/rbhma3100/Makefile
@@ -3,7 +3,4 @@
 #
 
 obj-y	 			+= init.o irq.o setup.o
-obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c
index a55cb4572ded..9169fab1773a 100644
--- a/arch/mips/jmr3927/rbhma3100/init.c
+++ b/arch/mips/jmr3927/rbhma3100/init.c
@@ -28,20 +28,10 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
 #include <asm/jmr3927/jmr3927.h>
 
-int prom_argc;
-char **prom_argv, **prom_envp;
 extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-unsigned long mips_nofpu = 0;
 
 const char *get_system_type(void)
 {
@@ -52,7 +42,7 @@ const char *get_system_type(void)
 	;
 }
 
-extern void puts(unsigned char *cp);
+extern void puts(const char *cp);
 
 void __init prom_init(void)
 {
@@ -61,10 +51,6 @@ void __init prom_init(void)
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
 		puts("Warning: TX3927 TLB off\n");
 #endif
-	prom_argc = fw_arg0;
-	prom_argv = (char **) fw_arg1;
-	prom_envp = (char **) fw_arg2;
-
 	mips_machgroup = MACH_GROUP_TOSHIBA;
 
 #ifdef CONFIG_TOSHIBA_JMR3927
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index 7d2c203cb406..1187b44a3dd4 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -30,53 +30,21 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/bitops.h>
 
-#include <asm/irq_regs.h>
 #include <asm/io.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-#include <asm/ptrace.h>
 #include <asm/processor.h>
-#include <asm/jmr3927/irq.h>
-#include <asm/debug.h>
 #include <asm/jmr3927/jmr3927.h>
 
 #if JMR3927_IRQ_END > NR_IRQS
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-struct tb_irq_space* tb_irq_spaces;
-
-static int jmr3927_irq_base = -1;
-
-#ifdef CONFIG_PCI
-static int jmr3927_gen_iack(void)
-{
-	/* generate ACK cycle */
-#ifdef __BIG_ENDIAN
-	return (tx3927_pcicptr->iiadp >> 24) & 0xff;
-#else
-	return tx3927_pcicptr->iiadp & 0xff;
-#endif
-}
-#endif
-
 #define irc_dlevel	0
 #define irc_elevel	1
 
@@ -87,89 +55,24 @@ static unsigned char irc_level[TX3927_NUM_IR] = {
 	6, 6, 6			/* TMR */
 };
 
-static void jmr3927_irq_disable(unsigned int irq_nr);
-static void jmr3927_irq_enable(unsigned int irq_nr);
-
-static void jmr3927_irq_ack(unsigned int irq)
-{
-	if (irq == JMR3927_IRQ_IRC_TMR0)
-		jmr3927_tmrptr->tisr = 0;       /* ack interrupt */
-
-	jmr3927_irq_disable(irq);
-}
-
-static void jmr3927_irq_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		jmr3927_irq_enable(irq);
-}
-
-static void jmr3927_irq_disable(unsigned int irq_nr)
-{
-	struct tb_irq_space* sp;
-
-	for (sp = tb_irq_spaces; sp; sp = sp->next) {
-		if (sp->start_irqno <= irq_nr &&
-		    irq_nr < sp->start_irqno + sp->nr_irqs) {
-			if (sp->mask_func)
-				sp->mask_func(irq_nr - sp->start_irqno,
-					      sp->space_id);
-			break;
-		}
-	}
-}
-
-static void jmr3927_irq_enable(unsigned int irq_nr)
-{
-	struct tb_irq_space* sp;
-
-	for (sp = tb_irq_spaces; sp; sp = sp->next) {
-		if (sp->start_irqno <= irq_nr &&
-		    irq_nr < sp->start_irqno + sp->nr_irqs) {
-			if (sp->unmask_func)
-				sp->unmask_func(irq_nr - sp->start_irqno,
-						sp->space_id);
-			break;
-		}
-	}
-}
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
- * So disable_irq/enable_irq MUST handle IOC/ISAC/IRC registers.
+ * So disable_irq/enable_irq MUST handle IOC/IRC registers.
  */
-static void mask_irq_isac(int irq_nr, int space_id)
-{
-	/* 0: mask */
-	unsigned char imask =
-		jmr3927_isac_reg_in(JMR3927_ISAC_INTM_ADDR);
-	unsigned int bit  = 1 << irq_nr;
-	jmr3927_isac_reg_out(imask & ~bit, JMR3927_ISAC_INTM_ADDR);
-	/* flush write buffer */
-	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
-}
-static void unmask_irq_isac(int irq_nr, int space_id)
-{
-	/* 0: mask */
-	unsigned char imask = jmr3927_isac_reg_in(JMR3927_ISAC_INTM_ADDR);
-	unsigned int bit  = 1 << irq_nr;
-	jmr3927_isac_reg_out(imask | bit, JMR3927_ISAC_INTM_ADDR);
-	/* flush write buffer */
-	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
-}
-
-static void mask_irq_ioc(int irq_nr, int space_id)
+static void mask_irq_ioc(unsigned int irq)
 {
 	/* 0: mask */
+	unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
 	unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
 	unsigned int bit = 1 << irq_nr;
 	jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR);
 	/* flush write buffer */
 	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
 }
-static void unmask_irq_ioc(int irq_nr, int space_id)
+static void unmask_irq_ioc(unsigned int irq)
 {
 	/* 0: mask */
+	unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
 	unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
 	unsigned int bit = 1 << irq_nr;
 	jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR);
@@ -177,8 +80,9 @@ static void unmask_irq_ioc(int irq_nr, int space_id)
 	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
 }
 
-static void mask_irq_irc(int irq_nr, int space_id)
+static void mask_irq_irc(unsigned int irq)
 {
+	unsigned int irq_nr = irq - JMR3927_IRQ_IRC;
 	volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
 	if (irq_nr & 1)
 		*ilrp = (*ilrp & 0x00ff) | (irc_dlevel << 8);
@@ -191,8 +95,9 @@ static void mask_irq_irc(int irq_nr, int space_id)
 	(void)tx3927_ircptr->ssr;
 }
 
-static void unmask_irq_irc(int irq_nr, int space_id)
+static void unmask_irq_irc(unsigned int irq)
 {
+	unsigned int irq_nr = irq - JMR3927_IRQ_IRC;
 	volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
 	if (irq_nr & 1)
 		*ilrp = (*ilrp & 0x00ff) | (irc_level[irq_nr] << 8);
@@ -203,98 +108,14 @@ static void unmask_irq_irc(int irq_nr, int space_id)
 	tx3927_ircptr->imr = irc_elevel;
 }
 
-struct tb_irq_space jmr3927_isac_irqspace = {
-	.next = NULL,
-	.start_irqno = JMR3927_IRQ_ISAC,
-	nr_irqs : JMR3927_NR_IRQ_ISAC,
-	.mask_func = mask_irq_isac,
-	.unmask_func = unmask_irq_isac,
-	.name = "ISAC",
-	.space_id = 0,
-	can_share : 0
-};
-struct tb_irq_space jmr3927_ioc_irqspace = {
-	.next = NULL,
-	.start_irqno = JMR3927_IRQ_IOC,
-	nr_irqs : JMR3927_NR_IRQ_IOC,
-	.mask_func = mask_irq_ioc,
-	.unmask_func = unmask_irq_ioc,
-	.name = "IOC",
-	.space_id = 0,
-	can_share : 1
-};
-
-struct tb_irq_space jmr3927_irc_irqspace = {
-	.next		= NULL,
-	.start_irqno	= JMR3927_IRQ_IRC,
-	.nr_irqs	= JMR3927_NR_IRQ_IRC,
-	.mask_func	= mask_irq_irc,
-	.unmask_func	= unmask_irq_irc,
-	.name		= "on-chip",
-	.space_id	= 0,
-	.can_share	= 0
-};
-
-
-#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
-static int tx_branch_likely_bug_count = 0;
-static int have_tx_branch_likely_bug = 0;
-
-static void tx_branch_likely_bug_fixup(void)
-{
-	struct pt_regs *regs = get_irq_regs();
-
-	/* TX39/49-BUG: Under this condition, the insn in delay slot
-           of the branch likely insn is executed (not nullified) even
-           the branch condition is false. */
-	if (!have_tx_branch_likely_bug)
-		return;
-	if ((regs->cp0_epc & 0xfff) == 0xffc &&
-	    KSEGX(regs->cp0_epc) != KSEG0 &&
-	    KSEGX(regs->cp0_epc) != KSEG1) {
-		unsigned int insn = *(unsigned int*)(regs->cp0_epc - 4);
-		/* beql,bnel,blezl,bgtzl */
-		/* bltzl,bgezl,blezall,bgezall */
-		/* bczfl, bcztl */
-		if ((insn & 0xf0000000) == 0x50000000 ||
-		    (insn & 0xfc0e0000) == 0x04020000 ||
-		    (insn & 0xf3fe0000) == 0x41020000) {
-			regs->cp0_epc -= 4;
-			tx_branch_likely_bug_count++;
-			printk(KERN_INFO
-			       "fix branch-likery bug in %s (insn %08x)\n",
-			       current->comm, insn);
-		}
-	}
-}
-#endif
-
-static void jmr3927_spurious(void)
-{
-	struct pt_regs * regs = get_irq_regs();
-
-#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
-	tx_branch_likely_bug_fixup();
-#endif
-	printk(KERN_WARNING "spurious interrupt (cause 0x%lx, pc 0x%lx, ra 0x%lx).\n",
-	       regs->cp0_cause, regs->cp0_epc, regs->regs[31]);
-}
-
 asmlinkage void plat_irq_dispatch(void)
 {
-	struct pt_regs * regs = get_irq_regs();
+	unsigned long cp0_cause = read_c0_cause();
 	int irq;
 
-#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND
-	tx_branch_likely_bug_fixup();
-#endif
-	if ((regs->cp0_cause & CAUSEF_IP7) == 0) {
-#if 0
-		jmr3927_spurious();
-#endif
+	if ((cp0_cause & CAUSEF_IP7) == 0)
 		return;
-	}
-	irq = (regs->cp0_cause >> CAUSEB_IP2) & 0x0f;
+	irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
 
 	do_IRQ(irq + JMR3927_IRQ_IRC);
 }
@@ -317,35 +138,6 @@ static struct irqaction ioc_action = {
 	jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL,
 };
 
-static irqreturn_t jmr3927_isac_interrupt(int irq, void *dev_id)
-{
-	unsigned char istat = jmr3927_isac_reg_in(JMR3927_ISAC_INTS2_ADDR);
-	int i;
-
-	for (i = 0; i < JMR3927_NR_IRQ_ISAC; i++) {
-		if (istat & (1 << i)) {
-			irq = JMR3927_IRQ_ISAC + i;
-			do_IRQ(irq);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static struct irqaction isac_action = {
-	jmr3927_isac_interrupt, 0, CPU_MASK_NONE, "ISAC", NULL, NULL,
-};
-
-
-static irqreturn_t jmr3927_isaerr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "ISA error interrupt (irq 0x%x).\n", irq);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction isaerr_action = {
-	jmr3927_isaerr_interrupt, 0, CPU_MASK_NONE, "ISA error", NULL, NULL,
-};
-
 static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
 {
 	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
@@ -358,54 +150,19 @@ static struct irqaction pcierr_action = {
 	jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL,
 };
 
-int jmr3927_ether1_irq = 0;
-
-void jmr3927_irq_init(u32 irq_base);
+static void __init jmr3927_irq_init(void);
 
 void __init arch_init_irq(void)
 {
-	/* look for io board's presence */
-	int have_isac = jmr3927_have_isac();
-
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
 	/* all IRC interrupt mode are Low Active. */
 
-	if (have_isac) {
-
-		/* ETHER1 (NE2000 compatible 10M-Ether) parameter setup */
-		/* temporary enable interrupt control */
-		tx3927_ircptr->cer = 1;
-		/* ETHER1 Int. Is High-Active. */
-		if (tx3927_ircptr->ssr & (1 << 0))
-			jmr3927_ether1_irq = JMR3927_IRQ_IRC_INT0;
-#if 0	/* INT3 may be asserted by ether0 (even after reboot...) */
-		else if (tx3927_ircptr->ssr & (1 << 3))
-			jmr3927_ether1_irq = JMR3927_IRQ_IRC_INT3;
-#endif
-		/* disable interrupt control */
-		tx3927_ircptr->cer = 0;
-
-		/* Ether1: High Active */
-		if (jmr3927_ether1_irq) {
-			int ether1_irc = jmr3927_ether1_irq - JMR3927_IRQ_IRC;
-			tx3927_ircptr->cr[ether1_irc / 8] |=
-				TX3927_IRCR_HIGH << ((ether1_irc % 8) * 2);
-		}
-	}
-
 	/* mask all IOC interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR);
 	/* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */
 	jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR);
 
-	if (have_isac) {
-		/* mask all ISAC interrupts */
-		jmr3927_isac_reg_out(0, JMR3927_ISAC_INTM_ADDR);
-		/* setup ISAC interrupt mode (ISAIRQ3,ISAIRQ5:Low Active ???) */
-		jmr3927_isac_reg_out(JMR3927_ISAC_INTF_IRQ3|JMR3927_ISAC_INTF_IRQ5, JMR3927_ISAC_INTP_ADDR);
-	}
-
 	/* clear PCI Soft interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR);
 	/* clear PCI Reset interrupts */
@@ -415,21 +172,11 @@ void __init arch_init_irq(void)
 	tx3927_ircptr->cer = TX3927_IRCER_ICE;
 	tx3927_ircptr->imr = irc_elevel;
 
-	jmr3927_irq_init(NR_ISA_IRQS);
-
-	/* setup irq space */
-	add_tb_irq_space(&jmr3927_isac_irqspace);
-	add_tb_irq_space(&jmr3927_ioc_irqspace);
-	add_tb_irq_space(&jmr3927_irc_irqspace);
+	jmr3927_irq_init();
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
 	setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
 
-	if (have_isac) {
-		setup_irq(JMR3927_IRQ_ISACINT, &isac_action);
-		setup_irq(JMR3927_IRQ_ISAC_ISAER, &isaerr_action);
-	}
-
 #ifdef CONFIG_PCI
 	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
 #endif
@@ -438,21 +185,28 @@ void __init arch_init_irq(void)
 	set_c0_status(ST0_IM);	/* IE bit is still 0. */
 }
 
-static struct irq_chip jmr3927_irq_controller = {
-	.name = "jmr3927_irq",
-	.ack = jmr3927_irq_ack,
-	.mask = jmr3927_irq_disable,
-	.mask_ack = jmr3927_irq_ack,
-	.unmask = jmr3927_irq_enable,
-	.end = jmr3927_irq_end,
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
 };
 
-void jmr3927_irq_init(u32 irq_base)
+static struct irq_chip jmr3927_irq_irc = {
+	.name = "jmr3927_irc",
+	.ack = mask_irq_irc,
+	.mask = mask_irq_irc,
+	.mask_ack = mask_irq_irc,
+	.unmask = unmask_irq_irc,
+};
+
+static void __init jmr3927_irq_init(void)
 {
 	u32 i;
 
-	for (i= irq_base; i< irq_base + JMR3927_NR_IRQ_IRC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip(i, &jmr3927_irq_controller);
-
-	jmr3927_irq_base = irq_base;
+	for (i = JMR3927_IRQ_IRC; i < JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_irc, handle_level_irq);
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
index 269a42deae06..2604f2c9a96e 100644
--- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c
+++ b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
@@ -31,23 +31,12 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/types.h>
-#include <asm/jmr3927/txx927.h>
-#include <asm/jmr3927/tx3927.h>
 #include <asm/jmr3927/jmr3927.h>
 
 #define TIMEOUT       0xffffff
-#define SLOW_DOWN
-
-static const char digits[16] = "0123456789abcdef";
-
-#ifdef SLOW_DOWN
-#define slow_down() { int k; for (k=0; k<10000; k++); }
-#else
-#define slow_down()
-#endif
 
 static int remoteDebugInitialized = 0;
+static void debugInit(int baud)
 
 int putDebugChar(unsigned char c)
 {
@@ -103,20 +92,8 @@ unsigned char getDebugChar(void)
 	return c;
 }
 
-void debugInit(int baud)
+static void debugInit(int baud)
 {
-	/*
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-	*/
-
 	tx3927_sioptr(0)->lcr = 0x020;
 	tx3927_sioptr(0)->dicr = 0;
 	tx3927_sioptr(0)->disr = 0x4100;
@@ -125,31 +102,4 @@ void debugInit(int baud)
 	tx3927_sioptr(0)->flcr = 0x02;
 	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
 		TXx927_SIBGR_BCLK_T0;
-#if 0
-	/*
-	 * Reset the UART.
-	 */
-	tx3927_sioptr(0)->fcr = TXx927_SIFCR_SWRST;
-	while (tx3927_sioptr(0)->fcr & TXx927_SIFCR_SWRST)
-		;
-
-	/*
-	 * and set the speed of the serial port
-	 * (currently hardwired to 9600 8N1
-	 */
-
-	tx3927_sioptr(0)->lcr = TXx927_SILCR_UMODE_8BIT |
-		TXx927_SILCR_USBL_1BIT |
-		TXx927_SILCR_SCS_IMCLK_BG;
-	tx3927_sioptr(0)->bgr =
-		((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-
-	/* HW RTS/CTS control */
-	if (ser->flags & ASYNC_HAVE_CTS_LINE)
-		tx3927_sioptr(0)->flcr = TXx927_SIFLCR_RCS | TXx927_SIFLCR_TES |
-			TXx927_SIFLCR_RTSTL_MAX /* 15 */;
-	/* Enable RX/TX */
-	tx3927_sioptr(0)->flcr &= ~(TXx927_SIFLCR_RSDE | TXx927_SIFLCR_TSDE);
-#endif
 }
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 7ca3d6d07b34..d1ef2895d564 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -45,6 +45,7 @@
 #include <linux/param.h>	/* for HZ */
 #include <linux/delay.h>
 #include <linux/pm.h>
+#include <linux/platform_device.h>
 #ifdef CONFIG_SERIAL_TXX9
 #include <linux/tty.h>
 #include <linux/serial.h>
@@ -53,94 +54,21 @@
 
 #include <asm/addrspace.h>
 #include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/jmr3927/jmr3927.h>
 #include <asm/mipsregs.h>
-#include <asm/traps.h>
 
-extern void puts(unsigned char *cp);
+extern void puts(const char *cp);
 
 /* Tick Timer divider */
 #define JMR3927_TIMER_CCD	0	/* 1/2 */
 #define JMR3927_TIMER_CLK	(JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD))
 
-unsigned char led_state = 0xf;
-
-struct {
-    struct resource ram0;
-    struct resource ram1;
-    struct resource pcimem;
-    struct resource iob;
-    struct resource ioc;
-    struct resource pciio;
-    struct resource jmy1394;
-    struct resource rom1;
-    struct resource rom0;
-    struct resource sio0;
-    struct resource sio1;
-} jmr3927_resources = {
-	{
-		.start	= 0,
-		.end	= 0x01FFFFFF,
-		.name	= "RAM0",
-		.flags = IORESOURCE_MEM
-	}, {
-		.start	= 0x02000000,
-		.end	= 0x03FFFFFF,
-		.name	= "RAM1",
-		.flags = IORESOURCE_MEM
-	}, {
-		.start	= 0x08000000,
-		.end	= 0x07FFFFFF,
-		.name	= "PCIMEM",
-		.flags = IORESOURCE_MEM
-	}, {
-		.start	= 0x10000000,
-		.end	= 0x13FFFFFF,
-		.name	= "IOB"
-	}, {
-		.start	= 0x14000000,
-		.end	= 0x14FFFFFF,
-		.name	= "IOC"
-	}, {
-		.start	= 0x15000000,
-		.end	= 0x15FFFFFF,
-		.name	= "PCIIO"
-	}, {
-		.start	= 0x1D000000,
-		.end	= 0x1D3FFFFF,
-		.name	= "JMY1394"
-	}, {
-		.start	= 0x1E000000,
-		.end	= 0x1E3FFFFF,
-		.name	= "ROM1"
-	}, {
-		.start	= 0x1FC00000,
-		.end	= 0x1FFFFFFF,
-		.name	= "ROM0"
-	}, {
-		.start	= 0xFFFEF300,
-		.end	= 0xFFFEF3FF,
-		.name	= "SIO0"
-	}, {
-		.start	= 0xFFFEF400,
-		.end	= 0xFFFEF4FF,
-		.name	= "SIO1"
-	},
-};
-
 /* don't enable - see errata */
-int jmr3927_ccfg_toeon = 0;
+static int jmr3927_ccfg_toeon;
 
 static inline void do_reset(void)
 {
-#ifdef CONFIG_TC35815
-	extern void tc35815_killall(void);
-	tc35815_killall();
-#endif
 #if 1	/* Resetting PCI bus */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -176,19 +104,16 @@ static cycle_t jmr3927_hpt_read(void)
 	return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr;
 }
 
-#define USE_RTC_DS1742
-#ifdef USE_RTC_DS1742
-extern void rtc_ds1742_init(unsigned long base);
-#endif
+static void jmr3927_timer_ack(void)
+{
+	jmr3927_tmrptr->tisr = 0;       /* ack interrupt */
+}
+
 static void __init jmr3927_time_init(void)
 {
 	clocksource_mips.read = jmr3927_hpt_read;
+	mips_timer_ack = jmr3927_timer_ack;
 	mips_hpt_frequency = JMR3927_TIMER_CLK;
-#ifdef USE_RTC_DS1742
-	if (jmr3927_have_nvram()) {
-	        rtc_ds1742_init(JMR3927_IOC_NVRAMB_ADDR);
-	}
-#endif
 }
 
 void __init plat_timer_setup(struct irqaction *irq)
@@ -202,9 +127,6 @@ void __init plat_timer_setup(struct irqaction *irq)
 	setup_irq(JMR3927_IRQ_TICK, irq);
 }
 
-#define USECS_PER_JIFFY (1000000/HZ)
-
-//#undef DO_WRITE_THROUGH
 #define DO_WRITE_THROUGH
 #define DO_ENABLE_CACHE
 
@@ -236,12 +158,6 @@ void __init plat_mem_setup(void)
 	/* Reboot on panic */
 	panic_timeout = 180;
 
-	{
-		unsigned int conf;
-		conf = read_c0_conf();
-	}
-
-#if 1
 	/* cache setup */
 	{
 		unsigned int conf;
@@ -268,16 +184,14 @@ void __init plat_mem_setup(void)
 		write_c0_conf(conf);
 		write_c0_cache(0);
 	}
-#endif
 
 	/* initialize board */
 	jmr3927_board_init();
 
 	argptr = prom_getcmdline();
 
-	if ((argptr = strstr(argptr, "toeon")) != NULL) {
-			jmr3927_ccfg_toeon = 1;
-	}
+	if ((argptr = strstr(argptr, "toeon")) != NULL)
+		jmr3927_ccfg_toeon = 1;
 	argptr = prom_getcmdline();
 	if ((argptr = strstr(argptr, "ip=")) == NULL) {
 		argptr = prom_getcmdline();
@@ -293,7 +207,7 @@ void __init plat_mem_setup(void)
 			memset(&req, 0, sizeof(req));
 			req.line = i;
 			req.iotype = UPIO_MEM;
-			req.membase = (char *)TX3927_SIO_REG(i);
+			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
 			req.mapbase = TX3927_SIO_REG(i);
 			req.irq = i == 0 ?
 				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
@@ -315,65 +229,33 @@ void __init plat_mem_setup(void)
 
 static void tx3927_setup(void);
 
-#ifdef CONFIG_PCI
-unsigned long mips_pci_io_base;
-unsigned long mips_pci_io_size;
-unsigned long mips_pci_mem_base;
-unsigned long mips_pci_mem_size;
-/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-unsigned long mips_pci_io_pciaddr = 0;
-#endif
-
 static void __init jmr3927_board_init(void)
 {
-	char *argptr;
-
-#ifdef CONFIG_PCI
-	mips_pci_io_base = JMR3927_PCIIO;
-	mips_pci_io_size = JMR3927_PCIIO_SIZE;
-	mips_pci_mem_base = JMR3927_PCIMEM;
-	mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
-#endif
-
 	tx3927_setup();
 
-	if (jmr3927_have_isac()) {
-
-#ifdef CONFIG_FB_E1355
-		argptr = prom_getcmdline();
-		if ((argptr = strstr(argptr, "video=")) == NULL) {
-			argptr = prom_getcmdline();
-			strcat(argptr, " video=e1355fb:crt16h");
-		}
-#endif
-
-#ifdef CONFIG_BLK_DEV_IDE
-		/* overrides PCI-IDE */
-#endif
-	}
-
 	/* SIO0 DTR on */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
 
 	jmr3927_led_set(0);
 
-
-	if (jmr3927_have_isac())
-		jmr3927_io_led_set(0);
 	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
 	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
 	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
 	       jmr3927_dipsw1(), jmr3927_dipsw2(),
 	       jmr3927_dipsw3(), jmr3927_dipsw4());
-	if (jmr3927_have_isac())
-		printk("JMI-3927IO2 --- ISAC(Rev %d) DIPSW:%01x\n",
-		       jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_REV_MASK,
-		       jmr3927_io_dipsw());
 }
 
-void __init tx3927_setup(void)
+static void __init tx3927_setup(void)
 {
 	int i;
+#ifdef CONFIG_PCI
+	unsigned long mips_pci_io_base = JMR3927_PCIIO;
+	unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
+	unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
+	unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
+	/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
+	unsigned long mips_pci_io_pciaddr = 0;
+#endif
 
 	/* SDRAMC are configured by PROM */
 
@@ -487,10 +369,8 @@ void __init tx3927_setup(void)
 		tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
 		tx3927_pcicptr->mba = 0;
 		tx3927_pcicptr->tlbmma = 0;
-#ifndef JMR3927_INIT_INDIRECT_PCI
 		/* Enable Direct mapping Address Space Decoder */
 		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-#endif
 
 		/* Clear All Local Bus Status */
 		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
@@ -503,22 +383,15 @@ void __init tx3927_setup(void)
 
 		/* PCIC Int => IRC IRQ10 */
 		tx3927_pcicptr->il = TX3927_IR_PCI;
-#if 1
 		/* Target Control (per errata) */
 		tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-#endif
 
 		/* Enable Bus Arbiter */
-#if 0
-		tx3927_pcicptr->req_trace = 0x73737373;
-#endif
 		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
 
 		tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
 			PCI_COMMAND_MEMORY |
-#if 1
 			PCI_COMMAND_IO |
-#endif
 			PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
 	}
 #endif /* CONFIG_PCI */
@@ -544,3 +417,30 @@ void __init tx3927_setup(void)
                        printk("TX3927 D-Cache WriteBack (CWF) .\n");
 	}
 }
+
+/* This trick makes rtc-ds1742 driver usable as is. */
+unsigned long __swizzle_addr_b(unsigned long port)
+{
+	if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
+		return port;
+	port = (port & 0xffff0000) | (port & 0x7fff << 1);
+#ifdef __BIG_ENDIAN
+	return port;
+#else
+	return port | 1;
+#endif
+}
+EXPORT_SYMBOL(__swizzle_addr_b);
+
+static int __init jmr3927_rtc_init(void)
+{
+	struct resource res = {
+		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
+		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev;
+	dev = platform_device_register_simple("ds1742", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(jmr3927_rtc_init);
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 1bf2c8448912..49246264cc7c 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -53,9 +53,9 @@ obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
 obj-$(CONFIG_BINFMT_IRIX)	+= binfmt_irix.o
-obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o signal32.o
+obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
-obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o ptrace32.o
+obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
 obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
@@ -65,7 +65,6 @@ obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 obj-$(CONFIG_I8253)		+= i8253.o
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index c0b089d47181..761a779d5c4f 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -64,6 +64,9 @@ void output_ptreg_defines(void)
 	offset("#define PT_R31    ", struct pt_regs, regs[31]);
 	offset("#define PT_LO     ", struct pt_regs, lo);
 	offset("#define PT_HI     ", struct pt_regs, hi);
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	offset("#define PT_ACX    ", struct pt_regs, acx);
+#endif
 	offset("#define PT_EPC    ", struct pt_regs, cp0_epc);
 	offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr);
 	offset("#define PT_STATUS ", struct pt_regs, cp0_status);
@@ -99,7 +102,6 @@ void output_thread_info_defines(void)
 	offset("#define TI_ADDR_LIMIT      ", struct thread_info, addr_limit);
 	offset("#define TI_RESTART_BLOCK   ", struct thread_info, restart_block);
 	offset("#define TI_REGS            ", struct thread_info, regs);
-	constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER);
 	constant("#define _THREAD_SIZE       ", THREAD_SIZE);
 	constant("#define _THREAD_MASK       ", THREAD_MASK);
 	linefeed;
@@ -246,6 +248,7 @@ void output_sc_defines(void)
 	text("/* Linux sigcontext offsets. */");
 	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
 	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
+	offset("#define SC_ACX        ", struct sigcontext, sc_acx);
 	offset("#define SC_MDHI       ", struct sigcontext, sc_mdhi);
 	offset("#define SC_MDLO       ", struct sigcontext, sc_mdlo);
 	offset("#define SC_PC         ", struct sigcontext, sc_pc);
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index f59ef271d247..ab755ea26c6a 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -16,6 +16,7 @@
 #include <linux/ptrace.h>
 #include <linux/stddef.h>
 
+#include <asm/bugs.h>
 #include <asm/cpu.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
@@ -97,7 +98,7 @@ static void au1k_wait(void)
 
 static int __initdata nowait = 0;
 
-int __init wait_disable(char *s)
+static int __init wait_disable(char *s)
 {
 	nowait = 1;
 
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
new file mode 100644
index 000000000000..304efdc5682f
--- /dev/null
+++ b/arch/mips/kernel/early_printk.c
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2003, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *   written by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/console.h>
+#include <linux/init.h>
+
+extern void prom_putchar(char);
+
+static void early_console_write(struct console *con, const char *s, unsigned n)
+{
+	while (n-- && *s) {
+		if (*s == '\n')
+			prom_putchar('\r');
+		prom_putchar(*s);
+		s++;
+	}
+}
+
+static struct console early_console = {
+	.name	= "early",
+	.write	= early_console_write,
+	.flags	= CON_PRINTBUFFER | CON_BOOT,
+	.index	= -1
+};
+
+void __init setup_early_printk(void)
+{
+	register_console(&early_console);
+}
+
+void __init disable_early_printk(void)
+{
+	unregister_console(&early_console);
+}
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 0b78fcbf044a..686249c5c328 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -121,7 +121,11 @@ FEXPORT(restore_partial)		# restore partial frame
 	SAVE_AT
 	SAVE_TEMP
 	LONG_L	v0, PT_STATUS(sp)
-	and	v0, 1
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+	and	v0, ST0_IEP
+#else
+	and	v0, ST0_IE
+#endif
 	beqz	v0, 1f
 	jal	trace_hardirqs_on
 	b	2f
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index aacd4a005c5f..297bd56c2347 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -128,6 +128,37 @@ handle_vcei:
 
 	.align  5
 NESTED(handle_int, PT_SIZE, sp)
+#ifdef CONFIG_TRACE_IRQFLAGS
+	/*
+	 * Check to see if the interrupted code has just disabled
+	 * interrupts and ignore this interrupt for now if so.
+	 *
+	 * local_irq_disable() disables interrupts and then calls
+	 * trace_hardirqs_off() to track the state. If an interrupt is taken
+	 * after interrupts are disabled but before the state is updated
+	 * it will appear to restore_all that it is incorrectly returning with
+	 * interrupts disabled
+	 */
+	.set	push
+	.set	noat
+	mfc0	k0, CP0_STATUS
+#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
+	and	k0, ST0_IEP
+	bnez	k0, 1f
+
+	mfc0	k0, EP0_EPC
+	.set	noreorder
+	j	k0
+	rfe
+#else
+	and	k0, ST0_IE
+	bnez	k0, 1f
+
+	eret
+#endif
+1:
+	.set pop
+#endif
 	SAVE_ALL
 	CLI
 	TRACE_IRQS_OFF
@@ -181,13 +212,13 @@ NESTED(except_vec_vi, 0, sp)
 	 * during service by SMTC kernel, we also want to
 	 * pass the IM value to be cleared.
 	 */
-EXPORT(except_vec_vi_mori)
+FEXPORT(except_vec_vi_mori)
 	ori	a0, $0, 0
 #endif /* CONFIG_MIPS_MT_SMTC */
-EXPORT(except_vec_vi_lui)
+FEXPORT(except_vec_vi_lui)
 	lui	v0, 0		/* Patched */
 	j	except_vec_vi_handler
-EXPORT(except_vec_vi_ori)
+FEXPORT(except_vec_vi_ori)
 	 ori	v0, 0		/* Patched */
 	.set	pop
 	END(except_vec_vi)
@@ -220,7 +251,17 @@ NESTED(except_vec_vi_handler, 0, sp)
 	_ehb
 #endif /* CONFIG_MIPS_MT_SMTC */
 	CLI
+#ifdef CONFIG_TRACE_IRQFLAGS
+	move	s0, v0
+#ifdef CONFIG_MIPS_MT_SMTC
+	move	s1, a0
+#endif
 	TRACE_IRQS_OFF
+#ifdef CONFIG_MIPS_MT_SMTC
+	move	a0, s1
+#endif
+	move	v0, s0
+#endif
 
 	LONG_L	s0, TI_REGS($28)
 	LONG_S	sp, TI_REGS($28)
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index b33ba6cd7f5b..2345160e63fc 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -28,7 +28,7 @@
  * moves to arch independent land
  */
 
-static int i8259A_auto_eoi;
+static int i8259A_auto_eoi = -1;
 DEFINE_SPINLOCK(i8259A_lock);
 /* some platforms call this... */
 void mask_and_ack_8259A(unsigned int);
@@ -216,7 +216,8 @@ spurious_8259A_irq:
 
 static int i8259A_resume(struct sys_device *dev)
 {
-	init_8259A(i8259A_auto_eoi);
+	if (i8259A_auto_eoi >= 0)
+		init_8259A(i8259A_auto_eoi);
 	return 0;
 }
 
@@ -226,8 +227,10 @@ static int i8259A_shutdown(struct sys_device *dev)
 	 * the kernel initialization code can get it
 	 * out of.
 	 */
-	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
-	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
+	if (i8259A_auto_eoi >= 0) {
+		outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
+		outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-1 */
+	}
 	return 0;
 }
 
@@ -252,7 +255,7 @@ static int __init i8259A_init_sysfs(void)
 
 device_initcall(i8259A_init_sysfs);
 
-void __init init_8259A(int auto_eoi)
+void init_8259A(int auto_eoi)
 {
 	unsigned long flags;
 
@@ -325,8 +328,8 @@ void __init init_i8259_irqs (void)
 {
 	int i;
 
-	request_resource(&ioport_resource, &pic1_io_resource);
-	request_resource(&ioport_resource, &pic2_io_resource);
+	insert_resource(&ioport_resource, &pic1_io_resource);
+	insert_resource(&ioport_resource, &pic2_io_resource);
 
 	init_8259A(0);
 
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index 5929f883e46b..c6580018c94b 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -17,6 +17,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/unistd.h>
 #include <linux/file.h>
 #include <linux/fs.h>
@@ -70,6 +71,7 @@ static int sp_stopping = 0;
 #define MTSP_SYSCALL_GETTIME	(MTSP_SYSCALL_BASE + 7)
 #define MTSP_SYSCALL_PIPEFREQ	(MTSP_SYSCALL_BASE + 8)
 #define MTSP_SYSCALL_GETTOD	(MTSP_SYSCALL_BASE + 9)
+#define MTSP_SYSCALL_IOCTL     (MTSP_SYSCALL_BASE + 10)
 
 #define MTSP_O_RDONLY		0x0000
 #define MTSP_O_WRONLY		0x0001
@@ -110,7 +112,8 @@ struct apsp_table syscall_command_table[] = {
 	{ MTSP_SYSCALL_CLOSE, __NR_close },
 	{ MTSP_SYSCALL_READ, __NR_read },
 	{ MTSP_SYSCALL_WRITE, __NR_write },
-	{ MTSP_SYSCALL_LSEEK32, __NR_lseek }
+	{ MTSP_SYSCALL_LSEEK32, __NR_lseek },
+	{ MTSP_SYSCALL_IOCTL, __NR_ioctl }
 };
 
 static int sp_syscall(int num, int arg0, int arg1, int arg2, int arg3)
@@ -189,17 +192,22 @@ void sp_work_handle_request(void)
 	struct mtsp_syscall_generic generic;
 	struct mtsp_syscall_ret ret;
 	struct kspd_notifications *n;
+	unsigned long written;
+	mm_segment_t old_fs;
 	struct timeval tv;
 	struct timezone tz;
 	int cmd;
 
 	char *vcwd;
-	mm_segment_t old_fs;
 	int size;
 
 	ret.retval = -1;
 
-	if (!rtlx_read(RTLX_CHANNEL_SYSIO, &sc, sizeof(struct mtsp_syscall), 0)) {
+	old_fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	if (!rtlx_read(RTLX_CHANNEL_SYSIO, &sc, sizeof(struct mtsp_syscall))) {
+		set_fs(old_fs);
 		printk(KERN_ERR "Expected request but nothing to read\n");
 		return;
 	}
@@ -207,7 +215,8 @@ void sp_work_handle_request(void)
 	size = sc.size;
 
 	if (size) {
-		if (!rtlx_read(RTLX_CHANNEL_SYSIO, &generic, size, 0)) {
+		if (!rtlx_read(RTLX_CHANNEL_SYSIO, &generic, size)) {
+			set_fs(old_fs);
 			printk(KERN_ERR "Expected request but nothing to read\n");
 			return;
 		}
@@ -232,8 +241,6 @@ void sp_work_handle_request(void)
  		if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
  		                             (int)&tz, 0,0)) == 0)
 		ret.retval = tv.tv_sec;
-
-		ret.errno = errno;
 		break;
 
  	case MTSP_SYSCALL_EXIT:
@@ -270,7 +277,6 @@ void sp_work_handle_request(void)
 		if (cmd >= 0) {
 			ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1,
 			                        generic.arg2, generic.arg3);
-			ret.errno = errno;
 		} else
  			printk(KERN_WARNING
 			       "KSPD: Unknown SP syscall number %d\n", sc.cmd);
@@ -280,8 +286,11 @@ void sp_work_handle_request(void)
 	if (vpe_getuid(SP_VPE))
 		sp_setfsuidgid( 0, 0);
 
-	if ((rtlx_write(RTLX_CHANNEL_SYSIO, &ret, sizeof(struct mtsp_syscall_ret), 0))
-	    < sizeof(struct mtsp_syscall_ret))
+	old_fs = get_fs();
+	set_fs(KERNEL_DS);
+	written = rtlx_write(RTLX_CHANNEL_SYSIO, &ret, sizeof(ret));
+	set_fs(old_fs);
+	if (written < sizeof(ret))
 		printk("KSPD: sp_work_handle_request failed to send to SP\n");
 }
 
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index fc4dd6c9dd80..37849edd0645 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -166,34 +166,6 @@ out:
 	return error;
 }
 
-asmlinkage long
-sysn32_waitid(int which, compat_pid_t pid,
-	      siginfo_t __user *uinfo, int options,
-	      struct compat_rusage __user *uru)
-{
-	struct rusage ru;
-	long ret;
-	mm_segment_t old_fs = get_fs();
-	int si_signo;
-
-	if (!access_ok(VERIFY_WRITE, uinfo, sizeof(*uinfo)))
-		return -EFAULT;
-
-	set_fs (KERNEL_DS);
-	ret = sys_waitid(which, pid, uinfo, options,
-			 uru ? (struct rusage __user *) &ru : NULL);
-	set_fs (old_fs);
-
-	if (__get_user(si_signo, &uinfo->si_signo))
-		return -EFAULT;
-	if (ret < 0 || si_signo == 0)
-		return ret;
-
-	if (uru)
-		ret = put_compat_rusage(&ru, uru);
-	return ret;
-}
-
 #define RLIM_INFINITY32	0x7fffffff
 #define RESOURCE32(x) ((x > RLIM_INFINITY32) ? RLIM_INFINITY32 : x)
 
@@ -339,6 +311,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
 	return ret;
 }
 
+#ifdef CONFIG_SYSVIPC
+
 asmlinkage long
 sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
 {
@@ -396,6 +370,16 @@ sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
 	return err;
 }
 
+#else
+
+asmlinkage long
+sys32_ipc (u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+{
+	return -ENOSYS;
+}
+
+#endif /* CONFIG_SYSVIPC */
+
 #ifdef CONFIG_MIPS32_N32
 asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
 {
@@ -572,151 +556,6 @@ asmlinkage long sys32_sync_file_range(int fd, int __pad,
 			flags);
 }
 
-/* Argument list sizes for sys_socketcall */
-#define AL(x) ((x) * sizeof(unsigned int))
-static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
-				AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
-				AL(6),AL(2),AL(5),AL(5),AL(3),AL(3)};
-#undef AL
-
-/*
- *	System call vectors.
- *
- *	Argument checking cleaned up. Saved 20% in size.
- *  This function doesn't need to set the kernel lock because
- *  it is set by the callees.
- */
-
-asmlinkage long sys32_socketcall(int call, unsigned int __user *args32)
-{
-	unsigned int a[6];
-	unsigned int a0,a1;
-	int err;
-
-	extern asmlinkage long sys_socket(int family, int type, int protocol);
-	extern asmlinkage long sys_bind(int fd, struct sockaddr __user *umyaddr, int addrlen);
-	extern asmlinkage long sys_connect(int fd, struct sockaddr __user *uservaddr, int addrlen);
-	extern asmlinkage long sys_listen(int fd, int backlog);
-	extern asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr, int __user *upeer_addrlen);
-	extern asmlinkage long sys_getsockname(int fd, struct sockaddr __user *usockaddr, int __user *usockaddr_len);
-	extern asmlinkage long sys_getpeername(int fd, struct sockaddr __user *usockaddr, int __user *usockaddr_len);
-	extern asmlinkage long sys_socketpair(int family, int type, int protocol, int __user *usockvec);
-	extern asmlinkage long sys_send(int fd, void __user * buff, size_t len, unsigned flags);
-	extern asmlinkage long sys_sendto(int fd, void __user * buff, size_t len, unsigned flags,
-					  struct sockaddr __user *addr, int addr_len);
-	extern asmlinkage long sys_recv(int fd, void __user * ubuf, size_t size, unsigned flags);
-	extern asmlinkage long sys_recvfrom(int fd, void __user * ubuf, size_t size, unsigned flags,
-					    struct sockaddr __user *addr, int __user *addr_len);
-	extern asmlinkage long sys_shutdown(int fd, int how);
-	extern asmlinkage long sys_setsockopt(int fd, int level, int optname, char __user *optval, int optlen);
-	extern asmlinkage long sys_getsockopt(int fd, int level, int optname, char __user *optval, int __user *optlen);
-	extern asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
-	extern asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned int flags);
-
-
-	if(call<1||call>SYS_RECVMSG)
-		return -EINVAL;
-
-	/* copy_from_user should be SMP safe. */
-	if (copy_from_user(a, args32, socketcall_nargs[call]))
-		return -EFAULT;
-
-	a0=a[0];
-	a1=a[1];
-
-	switch(call)
-	{
-		case SYS_SOCKET:
-			err = sys_socket(a0,a1,a[2]);
-			break;
-		case SYS_BIND:
-			err = sys_bind(a0,(struct sockaddr __user *)A(a1), a[2]);
-			break;
-		case SYS_CONNECT:
-			err = sys_connect(a0, (struct sockaddr __user *)A(a1), a[2]);
-			break;
-		case SYS_LISTEN:
-			err = sys_listen(a0,a1);
-			break;
-		case SYS_ACCEPT:
-			err = sys_accept(a0,(struct sockaddr __user *)A(a1), (int __user *)A(a[2]));
-			break;
-		case SYS_GETSOCKNAME:
-			err = sys_getsockname(a0,(struct sockaddr __user *)A(a1), (int __user *)A(a[2]));
-			break;
-		case SYS_GETPEERNAME:
-			err = sys_getpeername(a0, (struct sockaddr __user *)A(a1), (int __user *)A(a[2]));
-			break;
-		case SYS_SOCKETPAIR:
-			err = sys_socketpair(a0,a1, a[2], (int __user *)A(a[3]));
-			break;
-		case SYS_SEND:
-			err = sys_send(a0, (void __user *)A(a1), a[2], a[3]);
-			break;
-		case SYS_SENDTO:
-			err = sys_sendto(a0,(void __user *)A(a1), a[2], a[3],
-					 (struct sockaddr __user *)A(a[4]), a[5]);
-			break;
-		case SYS_RECV:
-			err = sys_recv(a0, (void __user *)A(a1), a[2], a[3]);
-			break;
-		case SYS_RECVFROM:
-			err = sys_recvfrom(a0, (void __user *)A(a1), a[2], a[3],
-					   (struct sockaddr __user *)A(a[4]), (int __user *)A(a[5]));
-			break;
-		case SYS_SHUTDOWN:
-			err = sys_shutdown(a0,a1);
-			break;
-		case SYS_SETSOCKOPT:
-			err = sys_setsockopt(a0, a1, a[2], (char __user *)A(a[3]), a[4]);
-			break;
-		case SYS_GETSOCKOPT:
-			err = sys_getsockopt(a0, a1, a[2], (char __user *)A(a[3]), (int __user *)A(a[4]));
-			break;
-		case SYS_SENDMSG:
-			err = sys_sendmsg(a0, (struct msghdr __user *) A(a1), a[2]);
-			break;
-		case SYS_RECVMSG:
-			err = sys_recvmsg(a0, (struct msghdr __user *) A(a1), a[2]);
-			break;
-		default:
-			err = -EINVAL;
-			break;
-	}
-	return err;
-}
-
-struct sigevent32 {
-	u32 sigev_value;
-	u32 sigev_signo;
-	u32 sigev_notify;
-	u32 payload[(64 / 4) - 3];
-};
-
-extern asmlinkage long
-sys_timer_create(clockid_t which_clock,
-		 struct sigevent __user *timer_event_spec,
-		 timer_t __user * created_timer_id);
-
-long
-sys32_timer_create(u32 clock, struct sigevent32 __user *se32, timer_t __user *timer_id)
-{
-	struct sigevent __user *p = NULL;
-	if (se32) {
-		struct sigevent se;
-		p = compat_alloc_user_space(sizeof(struct sigevent));
-		memset(&se, 0, sizeof(struct sigevent));
-		if (get_user(se.sigev_value.sival_int,  &se32->sigev_value) ||
-		    __get_user(se.sigev_signo, &se32->sigev_signo) ||
-		    __get_user(se.sigev_notify, &se32->sigev_notify) ||
-		    __copy_from_user(&se._sigev_un._pad, &se32->payload,
-				     sizeof(se32->payload)) ||
-		    copy_to_user(p, &se, sizeof(se)))
-			return -EFAULT;
-	}
-	return sys_timer_create(clock, p, timer_id);
-}
-
 save_static_function(sys32_clone);
 __attribute_used__ noinline static int
 _sys32_clone(nabi_no_regargs struct pt_regs regs)
@@ -737,49 +576,3 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs)
 	return do_fork(clone_flags, newsp, &regs, 0,
 	               parent_tidptr, child_tidptr);
 }
-
-/*
- * Implement the event wait interface for the eventpoll file. It is the kernel
- * part of the user space epoll_pwait(2).
- */
-asmlinkage long compat_sys_epoll_pwait(int epfd,
-	struct epoll_event __user *events, int maxevents, int timeout,
-	const compat_sigset_t __user *sigmask, size_t sigsetsize)
-{
-	int error;
-	sigset_t ksigmask, sigsaved;
-
-	/*
-	 * If the caller wants a certain signal mask to be set during the wait,
-	 * we apply it here.
-	 */
-	if (sigmask) {
-		if (sigsetsize != sizeof(sigset_t))
-			return -EINVAL;
-		if (!access_ok(VERIFY_READ, sigmask, sizeof(ksigmask)))
-			return -EFAULT;
-		if (__copy_conv_sigset_from_user(&ksigmask, sigmask))
-			return -EFAULT;
-		sigdelsetmask(&ksigmask, sigmask(SIGKILL) | sigmask(SIGSTOP));
-		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
-	}
-
-	error = sys_epoll_wait(epfd, events, maxevents, timeout);
-
-	/*
-	 * If we changed the signal mask, we need to restore the original one.
-	 * In case we've got a signal while waiting, we do not restore the
-	 * signal mask yet, and we allow do_signal() to deliver the signal on
-	 * the way back to userspace, before the signal mask is restored.
-	 */
-	if (sigmask) {
-		if (error == -EINTR) {
-			memcpy(&current->saved_sigmask, &sigsaved,
-				sizeof(sigsaved));
-			set_thread_flag(TIF_RESTORE_SIGMASK);
-		} else
-			sigprocmask(SIG_SETMASK, &sigsaved, NULL);
-	}
-
-	return error;
-}
diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c
index e0ad754c7edd..8f42fa85ac9e 100644
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -13,8 +13,8 @@
 #include <asm/cacheflush.h>
 #include <asm/page.h>
 
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
 
 extern unsigned long kexec_start_address;
 extern unsigned long kexec_indirection_page;
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 2ef857c3ee53..225755d0c1f6 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -37,6 +37,7 @@ EXPORT_SYMBOL(kernel_thread);
  * Userspace access stuff.
  */
 EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(__copy_user_inatomic);
 EXPORT_SYMBOL(__bzero);
 EXPORT_SYMBOL(__strncpy_from_user_nocheck_asm);
 EXPORT_SYMBOL(__strncpy_from_user_asm);
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 04e5b38d327d..6bdfb5a9fa1a 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -26,7 +26,6 @@
 #include <linux/completion.h>
 #include <linux/kallsyms.h>
 
-#include <asm/abi.h>
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
 #include <asm/dsp.h>
@@ -52,11 +51,11 @@ ATTRIB_NORET void cpu_idle(void)
 	/* endless idle loop with no priority at all */
 	while (1) {
 		while (!need_resched()) {
-#ifdef CONFIG_MIPS_MT_SMTC
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 			extern void smtc_idle_loop_hook(void);
 
 			smtc_idle_loop_hook();
-#endif /* CONFIG_MIPS_MT_SMTC */
+#endif
 			if (cpu_wait)
 				(*cpu_wait)();
 		}
@@ -66,38 +65,6 @@ ATTRIB_NORET void cpu_idle(void)
 	}
 }
 
-/*
- * Native o32 and N64 ABI without DSP ASE
- */
-struct mips_abi mips_abi = {
-	.do_signal	= do_signal,
-#ifdef CONFIG_TRAD_SIGNALS
-	.setup_frame	= setup_frame,
-#endif
-	.setup_rt_frame	= setup_rt_frame
-};
-
-#ifdef CONFIG_MIPS32_O32
-/*
- * o32 compatibility on 64-bit kernels, without DSP ASE
- */
-struct mips_abi mips_abi_32 = {
-	.do_signal	= do_signal32,
-	.setup_frame	= setup_frame_32,
-	.setup_rt_frame	= setup_rt_frame_32
-};
-#endif /* CONFIG_MIPS32_O32 */
-
-#ifdef CONFIG_MIPS32_N32
-/*
- * N32 on 64-bit kernels, without DSP ASE
- */
-struct mips_abi mips_abi_n32 = {
-	.do_signal	= do_signal,
-	.setup_rt_frame	= setup_rt_frame_n32
-};
-#endif /* CONFIG_MIPS32_N32 */
-
 asmlinkage void ret_from_fork(void);
 
 void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
@@ -246,7 +213,7 @@ int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr)
 /*
  * Create a kernel thread
  */
-ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
+static ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
 {
 	do_exit(fn(arg));
 }
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 258d74fd0b63..201ae194d1b8 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -236,6 +236,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		case MMLO:
 			tmp = regs->lo;
 			break;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		case ACX:
+			tmp = regs->acx;
+			break;
+#endif
 		case FPC_CSR:
 			tmp = child->thread.fpu.fcr31;
 			break;
@@ -362,6 +367,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		case MMLO:
 			regs->lo = data;
 			break;
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+		case ACX:
+			regs->acx = data;
+			break;
+#endif
 		case FPC_CSR:
 			child->thread.fpu.fcr31 = data;
 			break;
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 59c1577ecbb3..dbd42adc52ed 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -114,14 +114,6 @@ LEAF(_save_fp_context32)
  */
 LEAF(_restore_fp_context)
 	EX	lw t0, SC_FPC_CSR(a0)
-
-	/* Fail if the CSR has exceptions pending */
-	srl	t1, t0, 5
-	and	t1, t0
-	andi	t1, 0x1f << 7
-	bnez	t1, fault
-	 nop
-
 #ifdef CONFIG_64BIT
 	EX	ldc1 $f1, SC_FPREGS+8(a0)
 	EX	ldc1 $f3, SC_FPREGS+24(a0)
@@ -165,14 +157,6 @@ LEAF(_restore_fp_context)
 LEAF(_restore_fp_context32)
 	/* Restore an o32 sigcontext.  */
 	EX	lw t0, SC32_FPC_CSR(a0)
-
-	/* Fail if the CSR has exceptions pending */
-	srl	t1, t0, 5
-	and	t1, t0
-	andi	t1, 0x1f << 7
-	bnez	t1, fault
-	 nop
-
 	EX	ldc1 $f0, SC32_FPREGS+0(a0)
 	EX	ldc1 $f2, SC32_FPREGS+16(a0)
 	EX	ldc1 $f4, SC32_FPREGS+32(a0)
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index d92c48e0d7a6..bfc8ca168f83 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -53,7 +53,8 @@ static char module_name[] = "rtlx";
 static struct chan_waitqueues {
 	wait_queue_head_t rt_queue;
 	wait_queue_head_t lx_queue;
-	int in_open;
+	atomic_t in_open;
+	struct mutex mutex;
 } channel_wqs[RTLX_CHANNELS];
 
 static struct irqaction irq;
@@ -146,110 +147,91 @@ static void stopping(int vpe)
 
 int rtlx_open(int index, int can_sleep)
 {
-	int ret;
+	struct rtlx_info **p;
 	struct rtlx_channel *chan;
-	volatile struct rtlx_info **p;
+	enum rtlx_state state;
+	int ret = 0;
 
 	if (index >= RTLX_CHANNELS) {
 		printk(KERN_DEBUG "rtlx_open index out of range\n");
 		return -ENOSYS;
 	}
 
-	if (channel_wqs[index].in_open) {
-		printk(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
-		return -EBUSY;
+	if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
+		printk(KERN_DEBUG "rtlx_open channel %d already opened\n",
+		       index);
+		ret = -EBUSY;
+		goto out_fail;
 	}
 
-	channel_wqs[index].in_open++;
-
 	if (rtlx == NULL) {
 		if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
 			if (can_sleep) {
-				DECLARE_WAITQUEUE(wait, current);
-
-				/* go to sleep */
-				add_wait_queue(&channel_wqs[index].lx_queue, &wait);
-
-				set_current_state(TASK_INTERRUPTIBLE);
-				while ((p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
-					schedule();
-					set_current_state(TASK_INTERRUPTIBLE);
-				}
-
-				set_current_state(TASK_RUNNING);
-				remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
-
-				/* back running */
+				__wait_event_interruptible(channel_wqs[index].lx_queue,
+				                           (p = vpe_get_shared(RTLX_TARG_VPE)),
+				                           ret);
+				if (ret)
+					goto out_fail;
 			} else {
-				printk( KERN_DEBUG "No SP program loaded, and device "
+				printk(KERN_DEBUG "No SP program loaded, and device "
 					"opened with O_NONBLOCK\n");
-				channel_wqs[index].in_open = 0;
-				return -ENOSYS;
+				ret = -ENOSYS;
+				goto out_fail;
 			}
 		}
 
+		smp_rmb();
 		if (*p == NULL) {
 			if (can_sleep) {
-				DECLARE_WAITQUEUE(wait, current);
-
-				/* go to sleep */
-				add_wait_queue(&channel_wqs[index].lx_queue, &wait);
-
-				set_current_state(TASK_INTERRUPTIBLE);
-				while (*p == NULL) {
-					schedule();
-
-					/* reset task state to interruptable otherwise
-					   we'll whizz round here like a very fast loopy
-					   thing. schedule() appears to return with state
-					   set to TASK_RUNNING.
-
-					   If the loaded SP program, for whatever reason,
-					   doesn't set up the shared structure *p will never
-					   become true. So whoever connected to either /dev/rt?
-					   or if it was kspd, will then take up rather a lot of
-					   processor cycles.
-					*/
-
-					set_current_state(TASK_INTERRUPTIBLE);
+				DEFINE_WAIT(wait);
+
+				for (;;) {
+					prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE);
+					smp_rmb();
+					if (*p != NULL)
+						break;
+					if (!signal_pending(current)) {
+						schedule();
+						continue;
+					}
+					ret = -ERESTARTSYS;
+					goto out_fail;
 				}
-
-				set_current_state(TASK_RUNNING);
-				remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
-
-				/* back running */
-			}
-			else {
+				finish_wait(&channel_wqs[index].lx_queue, &wait);
+			} else {
 				printk(" *vpe_get_shared is NULL. "
 				       "Has an SP program been loaded?\n");
-				channel_wqs[index].in_open = 0;
-				return -ENOSYS;
+				ret = -ENOSYS;
+				goto out_fail;
 			}
 		}
 
 		if ((unsigned int)*p < KSEG0) {
 			printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
 			       "maybe an error code %d\n", (int)*p);
- 			channel_wqs[index].in_open = 0;
-			return -ENOSYS;
+			ret = -ENOSYS;
+			goto out_fail;
 		}
 
- 		if ((ret = rtlx_init(*p)) < 0) {
- 			channel_wqs[index].in_open = 0;
-  			return ret;
- 		}
+		if ((ret = rtlx_init(*p)) < 0)
+			goto out_ret;
 	}
 
 	chan = &rtlx->channel[index];
 
- 	if (chan->lx_state == RTLX_STATE_OPENED) {
- 		channel_wqs[index].in_open = 0;
-  		return -EBUSY;
- 	}
+	state = xchg(&chan->lx_state, RTLX_STATE_OPENED);
+	if (state == RTLX_STATE_OPENED) {
+		ret = -EBUSY;
+		goto out_fail;
+	}
 
-  	chan->lx_state = RTLX_STATE_OPENED;
- 	channel_wqs[index].in_open = 0;
-	return 0;
+out_fail:
+	smp_mb();
+	atomic_dec(&channel_wqs[index].in_open);
+	smp_mb();
+
+out_ret:
+	return ret;
 }
 
 int rtlx_release(int index)
@@ -270,30 +252,17 @@ unsigned int rtlx_read_poll(int index, int can_sleep)
 	/* data available to read? */
 	if (chan->lx_read == chan->lx_write) {
 		if (can_sleep) {
-			DECLARE_WAITQUEUE(wait, current);
-
-			/* go to sleep */
-			add_wait_queue(&channel_wqs[index].lx_queue, &wait);
-
-			set_current_state(TASK_INTERRUPTIBLE);
-			while (chan->lx_read == chan->lx_write) {
-				schedule();
+			int ret = 0;
 
-				set_current_state(TASK_INTERRUPTIBLE);
+			__wait_event_interruptible(channel_wqs[index].lx_queue,
+			                           chan->lx_read != chan->lx_write || sp_stopping,
+			                           ret);
+			if (ret)
+				return ret;
 
-				if (sp_stopping) {
-					set_current_state(TASK_RUNNING);
-					remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
-					return 0;
-				}
-			}
-
-			set_current_state(TASK_RUNNING);
-			remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
-
-			/* back running */
-		}
-		else
+			if (sp_stopping)
+				return 0;
+		} else
 			return 0;
 	}
 
@@ -320,56 +289,53 @@ unsigned int rtlx_write_poll(int index)
 	return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
 }
 
-static inline void copy_to(void *dst, void *src, size_t count, int user)
+ssize_t rtlx_read(int index, void __user *buff, size_t count)
 {
-	if (user)
-		copy_to_user(dst, src, count);
-	else
-		memcpy(dst, src, count);
-}
-
-static inline void copy_from(void *dst, void *src, size_t count, int user)
-{
-	if (user)
-		copy_from_user(dst, src, count);
-	else
-		memcpy(dst, src, count);
-}
-
-ssize_t rtlx_read(int index, void *buff, size_t count, int user)
-{
-	size_t fl = 0L;
+	size_t lx_write, fl = 0L;
 	struct rtlx_channel *lx;
+	unsigned long failed;
 
 	if (rtlx == NULL)
 		return -ENOSYS;
 
 	lx = &rtlx->channel[index];
 
+	mutex_lock(&channel_wqs[index].mutex);
+	smp_rmb();
+	lx_write = lx->lx_write;
+
 	/* find out how much in total */
 	count = min(count,
-		     (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read)
+		     (size_t)(lx_write + lx->buffer_size - lx->lx_read)
 		     % lx->buffer_size);
 
 	/* then how much from the read pointer onwards */
-	fl = min( count, (size_t)lx->buffer_size - lx->lx_read);
+	fl = min(count, (size_t)lx->buffer_size - lx->lx_read);
 
-	copy_to(buff, &lx->lx_buffer[lx->lx_read], fl, user);
+	failed = copy_to_user(buff, lx->lx_buffer + lx->lx_read, fl);
+	if (failed)
+		goto out;
 
 	/* and if there is anything left at the beginning of the buffer */
-	if ( count - fl )
-		copy_to (buff + fl, lx->lx_buffer, count - fl, user);
+	if (count - fl)
+		failed = copy_to_user(buff + fl, lx->lx_buffer, count - fl);
+
+out:
+	count -= failed;
 
-	/* update the index */
-	lx->lx_read += count;
-	lx->lx_read %= lx->buffer_size;
+	smp_wmb();
+	lx->lx_read = (lx->lx_read + count) % lx->buffer_size;
+	smp_wmb();
+	mutex_unlock(&channel_wqs[index].mutex);
 
 	return count;
 }
 
-ssize_t rtlx_write(int index, void *buffer, size_t count, int user)
+ssize_t rtlx_write(int index, const void __user *buffer, size_t count)
 {
 	struct rtlx_channel *rt;
+	unsigned long failed;
+	size_t rt_read;
 	size_t fl;
 
 	if (rtlx == NULL)
@@ -377,24 +343,35 @@ ssize_t rtlx_write(int index, void *buffer, size_t count, int user)
 
 	rt = &rtlx->channel[index];
 
+	mutex_lock(&channel_wqs[index].mutex);
+	smp_rmb();
+	rt_read = rt->rt_read;
+
 	/* total number of bytes to copy */
 	count = min(count,
-		    (size_t)write_spacefree(rt->rt_read, rt->rt_write,
-					    rt->buffer_size));
+		    (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size));
 
 	/* first bit from write pointer to the end of the buffer, or count */
 	fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
 
-	copy_from (&rt->rt_buffer[rt->rt_write], buffer, fl, user);
+	failed = copy_from_user(rt->rt_buffer + rt->rt_write, buffer, fl);
+	if (failed)
+		goto out;
 
 	/* if there's any left copy to the beginning of the buffer */
-	if( count - fl )
-		copy_from (rt->rt_buffer, buffer + fl, count - fl, user);
+	if (count - fl) {
+		failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
+	}
 
-	rt->rt_write += count;
-	rt->rt_write %= rt->buffer_size;
+out:
+	count -= failed;
 
-	return(count);
+	smp_wmb();
+	rt->rt_write = (rt->rt_write + count) % rt->buffer_size;
+	smp_wmb();
+	mutex_unlock(&channel_wqs[index].mutex);
+
+	return count;
 }
 
 
@@ -446,7 +423,7 @@ static ssize_t file_read(struct file *file, char __user * buffer, size_t count,
 		return 0;	// -EAGAIN makes cat whinge
 	}
 
-	return rtlx_read(minor, buffer, count, 1);
+	return rtlx_read(minor, buffer, count);
 }
 
 static ssize_t file_write(struct file *file, const char __user * buffer,
@@ -454,28 +431,25 @@ static ssize_t file_write(struct file *file, const char __user * buffer,
 {
 	int minor;
 	struct rtlx_channel *rt;
-	DECLARE_WAITQUEUE(wait, current);
 
 	minor = iminor(file->f_path.dentry->d_inode);
 	rt = &rtlx->channel[minor];
 
 	/* any space left... */
 	if (!rtlx_write_poll(minor)) {
+		int ret = 0;
 
 		if (file->f_flags & O_NONBLOCK)
 			return -EAGAIN;
 
-		add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		while (!rtlx_write_poll(minor))
-			schedule();
-
-		set_current_state(TASK_RUNNING);
-		remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
+		__wait_event_interruptible(channel_wqs[minor].rt_queue,
+		                           rtlx_write_poll(minor),
+		                           ret);
+		if (ret)
+			return ret;
 	}
 
-	return rtlx_write(minor, (void *)buffer, count, 1);
+	return rtlx_write(minor, buffer, count);
 }
 
 static const struct file_operations rtlx_fops = {
@@ -513,7 +487,8 @@ static int rtlx_module_init(void)
 	for (i = 0; i < RTLX_CHANNELS; i++) {
 		init_waitqueue_head(&channel_wqs[i].rt_queue);
 		init_waitqueue_head(&channel_wqs[i].lx_queue);
-		channel_wqs[i].in_open = 0;
+		atomic_set(&channel_wqs[i].in_open, 0);
+		mutex_init(&channel_wqs[i].mutex);
 
 		dev = device_create(mt_class, NULL, MKDEV(major, i),
 		                    "%s%d", module_name, i);
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 7c0b3936ba44..0c9a9ff8cd25 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -656,6 +656,8 @@ einval:	li	v0, -EINVAL
 	sys	sys_kexec_load		4
 	sys	sys_getcpu		3
 	sys	sys_epoll_pwait		6
+	sys	sys_ioprio_set		3
+	sys	sys_ioprio_get		2
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 10e9a18630aa..23f3b118f718 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -470,4 +470,7 @@ sys_call_table:
 	PTR	sys_get_robust_list
 	PTR	sys_kexec_load			/* 5270 */
 	PTR	sys_getcpu
-	PTR	compat_sys_epoll_pwait
+	PTR	sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get
+	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 2ceda4644a4d..6eac28337423 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -340,7 +340,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_statfs64
 	PTR	compat_sys_fstatfs64
 	PTR	sys_sendfile64
-	PTR	sys32_timer_create		/* 6220 */
+	PTR	compat_sys_timer_create		/* 6220 */
 	PTR	compat_sys_timer_settime
 	PTR	compat_sys_timer_gettime
 	PTR	sys_timer_getoverrun
@@ -361,7 +361,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_mq_notify
 	PTR	compat_sys_mq_getsetattr
 	PTR	sys_ni_syscall			/* 6240, sys_vserver */
-	PTR	sysn32_waitid
+	PTR	compat_sys_waitid
 	PTR	sys_ni_syscall			/* available, was setaltroot */
 	PTR	sys_add_key
 	PTR	sys_request_key
@@ -395,5 +395,8 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_set_robust_list
 	PTR	compat_sys_get_robust_list
 	PTR	compat_sys_kexec_load
-	PTR	sys_getcpu
+	PTR	sys_getcpu			/* 6275 */
 	PTR	compat_sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get
+	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index c5f590ca99b0..7e74b412a782 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -307,7 +307,7 @@ sys_call_table:
 	PTR	compat_sys_statfs
 	PTR	compat_sys_fstatfs		/* 4100 */
 	PTR	sys_ni_syscall			/* sys_ioperm */
-	PTR	sys32_socketcall
+	PTR	compat_sys_socketcall
 	PTR	sys_syslog
 	PTR	compat_sys_setitimer
 	PTR	compat_sys_getitimer		/* 4105 */
@@ -462,7 +462,7 @@ sys_call_table:
 	PTR	sys_fadvise64_64
 	PTR	compat_sys_statfs64		/* 4255 */
 	PTR	compat_sys_fstatfs64
-	PTR	sys32_timer_create
+	PTR	compat_sys_timer_create
 	PTR	compat_sys_timer_settime
 	PTR	compat_sys_timer_gettime
 	PTR	sys_timer_getoverrun		/* 4260 */
@@ -518,5 +518,7 @@ sys_call_table:
 	PTR	compat_sys_get_robust_list	/* 4310 */
 	PTR	compat_sys_kexec_load
 	PTR	sys_getcpu
-	PTR	sys_epoll_pwait
+	PTR	compat_sys_epoll_pwait
+	PTR	sys_ioprio_set
+	PTR	sys_ioprio_get			/* 4315 */
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 394540fad769..4975da0bfb63 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -525,6 +525,14 @@ void __init setup_arch(char **cmdline_p)
 {
 	cpu_probe();
 	prom_init();
+
+#ifdef CONFIG_EARLY_PRINTK
+	{
+		extern void setup_early_printk(void);
+
+		setup_early_printk();
+	}
+#endif
 	cpu_report();
 
 #if defined(CONFIG_VT)
@@ -543,7 +551,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
-int __init fpu_disable(char *s)
+static int __init fpu_disable(char *s)
 {
 	int i;
 
@@ -555,7 +563,7 @@ int __init fpu_disable(char *s)
 
 __setup("nofpu", fpu_disable);
 
-int __init dsp_disable(char *s)
+static int __init dsp_disable(char *s)
 {
 	cpu_data[0].ases &= ~MIPS_ASE_DSP;
 
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index fdbdbdc65b54..c0faabd52010 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -31,4 +31,16 @@ extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
  */
 extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall);
 
+/* Check and clear pending FPU exceptions in saved CSR */
+extern int fpcsr_pending(unsigned int __user *fpcsr);
+
+/* Make sure we will not lose FPU ownership */
+#ifdef CONFIG_PREEMPT
+#define lock_fpu_owner()	preempt_disable()
+#define unlock_fpu_owner()	preempt_enable()
+#else
+#define lock_fpu_owner()	pagefault_disable()
+#define unlock_fpu_owner()	pagefault_enable()
+#endif
+
 #endif	/* __SIGNAL_COMMON_H */
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index b2e9ab1bb101..07d67309451a 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -20,6 +20,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/compiler.h>
+#include <linux/uaccess.h>
 
 #include <asm/abi.h>
 #include <asm/asm.h>
@@ -27,7 +28,6 @@
 #include <asm/cacheflush.h>
 #include <asm/fpu.h>
 #include <asm/sim.h>
-#include <asm/uaccess.h>
 #include <asm/ucontext.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
@@ -78,10 +78,51 @@ struct rt_sigframe {
 /*
  * Helper routines
  */
+static int protected_save_fp_context(struct sigcontext __user *sc)
+{
+	int err;
+	while (1) {
+		lock_fpu_owner();
+		own_fpu_inatomic(1);
+		err = save_fp_context(sc); /* this might fail */
+		unlock_fpu_owner();
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __put_user(0, &sc->sc_fpregs[0]) |
+			__put_user(0, &sc->sc_fpregs[31]) |
+			__put_user(0, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+	return err;
+}
+
+static int protected_restore_fp_context(struct sigcontext __user *sc)
+{
+	int err, tmp;
+	while (1) {
+		lock_fpu_owner();
+		own_fpu_inatomic(0);
+		err = restore_fp_context(sc); /* this might fail */
+		unlock_fpu_owner();
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __get_user(tmp, &sc->sc_fpregs[0]) |
+			__get_user(tmp, &sc->sc_fpregs[31]) |
+			__get_user(tmp, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+	return err;
+}
+
 int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 {
 	int err = 0;
 	int i;
+	unsigned int used_math;
 
 	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
 
@@ -89,6 +130,9 @@ int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	for (i = 1; i < 32; i++)
 		err |= __put_user(regs->regs[i], &sc->sc_regs[i]);
 
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	err |= __put_user(regs->acx, &sc->sc_acx);
+#endif
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@@ -101,24 +145,48 @@ int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
 	}
 
-	err |= __put_user(!!used_math(), &sc->sc_used_math);
+	used_math = !!used_math();
+	err |= __put_user(used_math, &sc->sc_used_math);
 
-	if (used_math()) {
+	if (used_math) {
 		/*
 		 * Save FPU state to signal context. Signal handler
 		 * will "inherit" current FPU state.
 		 */
-		preempt_disable();
+		err |= protected_save_fp_context(sc);
+	}
+	return err;
+}
 
-		if (!is_fpu_owner()) {
-			own_fpu();
-			restore_fp(current);
-		}
-		err |= save_fp_context(sc);
+int fpcsr_pending(unsigned int __user *fpcsr)
+{
+	int err, sig = 0;
+	unsigned int csr, enabled;
 
-		preempt_enable();
+	err = __get_user(csr, fpcsr);
+	enabled = FPU_CSR_UNI_X | ((csr & FPU_CSR_ALL_E) << 5);
+	/*
+	 * If the signal handler set some FPU exceptions, clear it and
+	 * send SIGFPE.
+	 */
+	if (csr & enabled) {
+		csr &= ~enabled;
+		err |= __put_user(csr, fpcsr);
+		sig = SIGFPE;
 	}
-	return err;
+	return err ?: sig;
+}
+
+static int
+check_and_restore_fp_context(struct sigcontext __user *sc)
+{
+	int err, sig;
+
+	err = sig = fpcsr_pending(&sc->sc_fpc_csr);
+	if (err > 0)
+		err = 0;
+	err |= protected_restore_fp_context(sc);
+	return err ?: sig;
 }
 
 int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
@@ -132,6 +200,10 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	err |= __get_user(regs->acx, &sc->sc_acx);
+#endif
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@@ -150,19 +222,15 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	err |= __get_user(used_math, &sc->sc_used_math);
 	conditional_used_math(used_math);
 
-	preempt_disable();
-
-	if (used_math()) {
+	if (used_math) {
 		/* restore fpu context if we have used it before */
-		own_fpu();
-		err |= restore_fp_context(sc);
+		if (!err)
+			err = check_and_restore_fp_context(sc);
 	} else {
 		/* signal handler may have used FPU.  Give it up. */
-		lose_fpu();
+		lose_fpu(0);
 	}
 
-	preempt_enable();
-
 	return err;
 }
 
@@ -325,6 +393,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 {
 	struct sigframe __user *frame;
 	sigset_t blocked;
+	int sig;
 
 	frame = (struct sigframe __user *) regs.regs[29];
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -338,8 +407,11 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(&regs, &frame->sf_sc))
+	sig = restore_sigcontext(&regs, &frame->sf_sc);
+	if (sig < 0)
 		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
 
 	/*
 	 * Don't let your children do this ...
@@ -361,6 +433,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	struct rt_sigframe __user *frame;
 	sigset_t set;
 	stack_t st;
+	int sig;
 
 	frame = (struct rt_sigframe __user *) regs.regs[29];
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -374,8 +447,11 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext))
+	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
 		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
 
 	if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st)))
 		goto badframe;
@@ -398,7 +474,7 @@ badframe:
 }
 
 #ifdef CONFIG_TRAD_SIGNALS
-int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
+static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set)
 {
 	struct sigframe __user *frame;
@@ -443,7 +519,7 @@ give_sigsegv:
 }
 #endif
 
-int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
+static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe __user *frame;
@@ -501,6 +577,14 @@ give_sigsegv:
 	return -EFAULT;
 }
 
+struct mips_abi mips_abi = {
+#ifdef CONFIG_TRAD_SIGNALS
+	.setup_frame	= setup_frame,
+#endif
+	.setup_rt_frame	= setup_rt_frame,
+	.restart	= __NR_restart_syscall
+};
+
 static int handle_signal(unsigned long sig, siginfo_t *info,
 	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
 {
@@ -539,7 +623,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	return ret;
 }
 
-void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
 {
 	struct k_sigaction ka;
 	sigset_t *oldset;
@@ -589,7 +673,7 @@ void do_signal(struct pt_regs *regs)
 			regs->cp0_epc -= 8;
 		}
 		if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
-			regs->regs[2] = __NR_restart_syscall;
+			regs->regs[2] = current->thread.abi->restart;
 			regs->regs[7] = regs->regs[26];
 			regs->cp0_epc -= 4;
 		}
@@ -615,5 +699,5 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 {
 	/* deal with pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
-		current->thread.abi->do_signal(regs);
+		do_signal(regs);
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index c28cb21514c8..b9a014411f83 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -22,6 +22,7 @@
 #include <linux/compat.h>
 #include <linux/suspend.h>
 #include <linux/compiler.h>
+#include <linux/uaccess.h>
 
 #include <asm/abi.h>
 #include <asm/asm.h>
@@ -29,7 +30,6 @@
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
 #include <asm/sim.h>
-#include <asm/uaccess.h>
 #include <asm/ucontext.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
@@ -104,17 +104,10 @@ typedef struct compat_siginfo {
  */
 #define __NR_O32_sigreturn		4119
 #define __NR_O32_rt_sigreturn		4193
-#define __NR_O32_restart_syscall	4253
+#define __NR_O32_restart_syscall        4253
 
 /* 32-bit compatibility types */
 
-#define _NSIG_BPW32	32
-#define _NSIG_WORDS32	(_NSIG / _NSIG_BPW32)
-
-typedef struct {
-	unsigned int sig[_NSIG_WORDS32];
-} sigset_t32;
-
 typedef unsigned int __sighandler32_t;
 typedef void (*vfptr_t)(void);
 
@@ -136,7 +129,7 @@ struct ucontext32 {
 	s32                 uc_link;
 	stack32_t           uc_stack;
 	struct sigcontext32 uc_mcontext;
-	sigset_t32          uc_sigmask;   /* mask last for extensibility */
+	compat_sigset_t     uc_sigmask;   /* mask last for extensibility */
 };
 
 /*
@@ -150,7 +143,7 @@ struct sigframe32 {
 	u32 sf_ass[4];		/* argument save space for o32 */
 	u32 sf_code[2];		/* signal trampoline */
 	struct sigcontext32 sf_sc;
-	sigset_t sf_mask;
+	compat_sigset_t sf_mask;
 };
 
 struct rt_sigframe32 {
@@ -166,7 +159,7 @@ struct sigframe32 {
 	u32 sf_ass[4];			/* argument save space for o32 */
 	u32 sf_pad[2];
 	struct sigcontext32 sf_sc;	/* hw context */
-	sigset_t sf_mask;
+	compat_sigset_t sf_mask;
 	u32 sf_code[8] ____cacheline_aligned;	/* signal trampoline */
 };
 
@@ -183,11 +176,52 @@ struct rt_sigframe32 {
 /*
  * sigcontext handlers
  */
+static int protected_save_fp_context32(struct sigcontext32 __user *sc)
+{
+	int err;
+	while (1) {
+		lock_fpu_owner();
+		own_fpu_inatomic(1);
+		err = save_fp_context32(sc); /* this might fail */
+		unlock_fpu_owner();
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __put_user(0, &sc->sc_fpregs[0]) |
+			__put_user(0, &sc->sc_fpregs[31]) |
+			__put_user(0, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+	return err;
+}
+
+static int protected_restore_fp_context32(struct sigcontext32 __user *sc)
+{
+	int err, tmp;
+	while (1) {
+		lock_fpu_owner();
+		own_fpu_inatomic(0);
+		err = restore_fp_context32(sc); /* this might fail */
+		unlock_fpu_owner();
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __get_user(tmp, &sc->sc_fpregs[0]) |
+			__get_user(tmp, &sc->sc_fpregs[31]) |
+			__get_user(tmp, &sc->sc_fpc_csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+	return err;
+}
+
 static int setup_sigcontext32(struct pt_regs *regs,
 			      struct sigcontext32 __user *sc)
 {
 	int err = 0;
 	int i;
+	u32 used_math;
 
 	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
 
@@ -207,26 +241,31 @@ static int setup_sigcontext32(struct pt_regs *regs,
 		err |= __put_user(mflo3(), &sc->sc_lo3);
 	}
 
-	err |= __put_user(!!used_math(), &sc->sc_used_math);
+	used_math = !!used_math();
+	err |= __put_user(used_math, &sc->sc_used_math);
 
-	if (used_math()) {
+	if (used_math) {
 		/*
 		 * Save FPU state to signal context.  Signal handler
 		 * will "inherit" current FPU state.
 		 */
-		preempt_disable();
-
-		if (!is_fpu_owner()) {
-			own_fpu();
-			restore_fp(current);
-		}
-		err |= save_fp_context32(sc);
-
-		preempt_enable();
+		err |= protected_save_fp_context32(sc);
 	}
 	return err;
 }
 
+static int
+check_and_restore_fp_context32(struct sigcontext32 __user *sc)
+{
+	int err, sig;
+
+	err = sig = fpcsr_pending(&sc->sc_fpc_csr);
+	if (err > 0)
+		err = 0;
+	err |= protected_restore_fp_context32(sc);
+	return err ?: sig;
+}
+
 static int restore_sigcontext32(struct pt_regs *regs,
 				struct sigcontext32 __user *sc)
 {
@@ -257,19 +296,15 @@ static int restore_sigcontext32(struct pt_regs *regs,
 	err |= __get_user(used_math, &sc->sc_used_math);
 	conditional_used_math(used_math);
 
-	preempt_disable();
-
-	if (used_math()) {
+	if (used_math) {
 		/* restore fpu context if we have used it before */
-		own_fpu();
-		err |= restore_fp_context32(sc);
+		if (!err)
+			err = check_and_restore_fp_context32(sc);
 	} else {
 		/* signal handler may have used FPU.  Give it up. */
-		lose_fpu();
+		lose_fpu(0);
 	}
 
-	preempt_enable();
-
 	return err;
 }
 
@@ -515,6 +550,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 {
 	struct sigframe32 __user *frame;
 	sigset_t blocked;
+	int sig;
 
 	frame = (struct sigframe32 __user *) regs.regs[29];
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -528,8 +564,11 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext32(&regs, &frame->sf_sc))
+	sig = restore_sigcontext32(&regs, &frame->sf_sc);
+	if (sig < 0)
 		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
 
 	/*
 	 * Don't let your children do this ...
@@ -552,6 +591,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	sigset_t set;
 	stack_t st;
 	s32 sp;
+	int sig;
 
 	frame = (struct rt_sigframe32 __user *) regs.regs[29];
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -565,8 +605,11 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext))
+	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
 		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
 
 	/* The ucontext contains a stack32_t, so we must convert!  */
 	if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
@@ -598,7 +641,7 @@ badframe:
 	force_sig(SIGSEGV, current);
 }
 
-int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set)
 {
 	struct sigframe32 __user *frame;
@@ -644,7 +687,7 @@ give_sigsegv:
 	return -EFAULT;
 }
 
-int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
+static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
 	int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe32 __user *frame;
@@ -704,110 +747,14 @@ give_sigsegv:
 	return -EFAULT;
 }
 
-static inline int handle_signal(unsigned long sig, siginfo_t *info,
-	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
-{
-	int ret;
-
-	switch (regs->regs[0]) {
-	case ERESTART_RESTARTBLOCK:
-	case ERESTARTNOHAND:
-		regs->regs[2] = EINTR;
-		break;
-	case ERESTARTSYS:
-		if (!(ka->sa.sa_flags & SA_RESTART)) {
-			regs->regs[2] = EINTR;
-			break;
-		}
-	/* fallthrough */
-	case ERESTARTNOINTR:		/* Userland will reload $v0.  */
-		regs->regs[7] = regs->regs[26];
-		regs->cp0_epc -= 8;
-	}
-
-	regs->regs[0] = 0;		/* Don't deal with this again.  */
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
-	else
-		ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	return ret;
-}
-
-void do_signal32(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	sigset_t *oldset;
-	siginfo_t info;
-	int signr;
-
-	/*
-	 * We want the common case to go fast, which is why we may in certain
-	 * cases get here from kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee! Actually deliver the signal. */
-		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/*
-			* A signal was successfully delivered; the saved
-			* sigmask will have been stored in the signal frame,
-			* and will be restored by sigreturn, so we can simply
-			* clear the TIF_RESTORE_SIGMASK flag.
-			*/
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-
-		return;
-	}
-
-	/*
-	 * Who's code doesn't conform to the restartable syscall convention
-	 * dies here!!!  The li instruction, a single machine instruction,
-	 * must directly be followed by the syscall instruction.
-	 */
-	if (regs->regs[0]) {
-		if (regs->regs[2] == ERESTARTNOHAND ||
-		    regs->regs[2] == ERESTARTSYS ||
-		    regs->regs[2] == ERESTARTNOINTR) {
-			regs->regs[7] = regs->regs[26];
-			regs->cp0_epc -= 8;
-		}
-		if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
-			regs->regs[2] = __NR_O32_restart_syscall;
-			regs->regs[7] = regs->regs[26];
-			regs->cp0_epc -= 4;
-		}
-		regs->regs[0] = 0;	/* Don't deal with this again.  */
-	}
-
-	/*
-	* If there's no signal to deliver, we just put the saved sigmask
-	* back
-	*/
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
+/*
+ * o32 compatibility on 64-bit kernels, without DSP ASE
+ */
+struct mips_abi mips_abi_32 = {
+	.setup_frame	= setup_frame_32,
+	.setup_rt_frame	= setup_rt_frame_32,
+	.restart	= __NR_O32_restart_syscall
+};
 
 asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
 				  struct sigaction32 __user *oact,
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 7ca2a078841f..a9202fa95987 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -29,6 +29,7 @@
 #include <linux/compat.h>
 #include <linux/bitops.h>
 
+#include <asm/abi.h>
 #include <asm/asm.h>
 #include <asm/cacheflush.h>
 #include <asm/compat-signal.h>
@@ -126,6 +127,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	sigset_t set;
 	stack_t st;
 	s32 sp;
+	int sig;
 
 	frame = (struct rt_sigframe_n32 __user *) regs.regs[29];
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -139,8 +141,11 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext))
+	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
 		goto badframe;
+	else if (sig)
+		force_sig(sig, current);
 
 	/* The ucontext contains a stack32_t, so we must convert!  */
 	if (__get_user(sp, &frame->rs_uc.uc_stack.ss_sp))
@@ -169,7 +174,7 @@ badframe:
 	force_sig(SIGSEGV, current);
 }
 
-int setup_rt_frame_n32(struct k_sigaction * ka,
+static int setup_rt_frame_n32(struct k_sigaction * ka,
 	struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
 {
 	struct rt_sigframe_n32 __user *frame;
@@ -228,3 +233,8 @@ give_sigsegv:
 	force_sigsegv(signr, current);
 	return -EFAULT;
 }
+
+struct mips_abi mips_abi_n32 = {
+	.setup_rt_frame	= setup_rt_frame_n32,
+	.restart	= __NR_N32_restart_syscall
+};
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 0555fc554f65..c46e479c992b 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -51,31 +51,14 @@ int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
 EXPORT_SYMBOL(phys_cpu_present_map);
 EXPORT_SYMBOL(cpu_online_map);
 
+/* This happens early in bootup, can't really do it better */
 static void smp_tune_scheduling (void)
 {
 	struct cache_desc *cd = &current_cpu_data.scache;
-	unsigned long cachesize;       /* kB   */
-	unsigned long cpu_khz;
+	unsigned long cachesize = cd->linesz * cd->sets * cd->ways;
 
-	/*
-	 * Crude estimate until we actually meassure ...
-	 */
-	cpu_khz = loops_per_jiffy * 2 * HZ / 1000;
-
-	/*
-	 * Rough estimation for SMP scheduling, this is the number of
-	 * cycles it takes for a fully memory-limited process to flush
-	 * the SMP-local cache.
-	 *
-	 * (For a P5 this pretty much means we will choose another idle
-	 *  CPU almost always at wakeup time (this is due to the small
-	 *  L1 cache), on PIIs it's around 50-100 usecs, depending on
-	 *  the cache size)
-	 */
-	if (!cpu_khz)
-		return;
-
-	cachesize = cd->linesz * cd->sets * cd->ways;
+	if (cachesize > max_cache_size)
+		max_cache_size = cachesize;
 }
 
 extern void __init calibrate_delay(void);
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 9251ea824937..5dcfab6b288e 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 
 #include <asm/cpu.h>
@@ -14,6 +15,7 @@
 #include <asm/hazards.h>
 #include <asm/mmu_context.h>
 #include <asm/smp.h>
+#include <asm/mips-boards/maltaint.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
 #include <asm/time.h>
@@ -75,7 +77,7 @@ static struct smtc_ipi_q freeIPIq;
 
 void ipi_decode(struct smtc_ipi *);
 static void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
-static void setup_cross_vpe_interrupts(void);
+static void setup_cross_vpe_interrupts(unsigned int nvpe);
 void init_smtc_stats(void);
 
 /* Global SMTC Status */
@@ -141,10 +143,7 @@ __setup("ipibufs=", ipibufs);
 __setup("nostlb", stlb_disable);
 __setup("asidmask=", asidmask_set);
 
-/* Enable additional debug checks before going into CPU idle loop */
-#define SMTC_IDLE_HOOK_DEBUG
-
-#ifdef SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 
 static int hang_trig = 0;
 
@@ -171,12 +170,15 @@ __setup("tintq=", tintq);
 
 int imstuckcount[2][8];
 /* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
-int vpemask[2][8] = {{0,1,1,0,0,0,0,1},{0,1,0,0,0,0,0,1}};
+int vpemask[2][8] = {
+	{0, 0, 1, 0, 0, 0, 0, 1},
+	{0, 0, 0, 0, 0, 0, 0, 1}
+};
 int tcnoprog[NR_CPUS];
 static atomic_t idle_hook_initialized = {0};
 static int clock_hang_reported[NR_CPUS];
 
-#endif /* SMTC_IDLE_HOOK_DEBUG */
+#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
 /* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */
 
@@ -394,10 +396,10 @@ void mipsmt_prepare_cpus(void)
 		printk("ASID mask value override to 0x%x\n", asidmask);
 
 	/* Temporary */
-#ifdef SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 	if (hang_trig)
 		printk("Logic Analyser Trigger on suspected TC hang\n");
-#endif /* SMTC_IDLE_HOOK_DEBUG */
+#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
 	/* Put MVPE's into 'configuration state' */
 	write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC );
@@ -504,8 +506,7 @@ void mipsmt_prepare_cpus(void)
 
 	/* If we have multiple VPEs running, set up the cross-VPE interrupt */
 
-	if (nvpe > 1)
-		setup_cross_vpe_interrupts();
+	setup_cross_vpe_interrupts(nvpe);
 
 	/* Set up queue of free IPI "messages". */
 	nipi = NR_CPUS * IPIBUF_PER_CPU;
@@ -610,7 +611,12 @@ void smtc_cpus_done(void)
 int setup_irq_smtc(unsigned int irq, struct irqaction * new,
 			unsigned long hwmask)
 {
+	unsigned int vpe = current_cpu_data.vpe_id;
+
 	irq_hwmask[irq] = hwmask;
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+	vpemask[vpe][irq - MIPSCPU_INT_BASE] = 1;
+#endif
 
 	return setup_irq(irq, new);
 }
@@ -815,12 +821,15 @@ void ipi_decode(struct smtc_ipi *pipi)
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
+		irq_enter();
+		kstat_this_cpu.irqs[MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR]++;
 		/* Invoke Clock "Interrupt" */
 		ipi_timer_latch[dest_copy] = 0;
-#ifdef SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 		clock_hang_reported[dest_copy] = 0;
-#endif /* SMTC_IDLE_HOOK_DEBUG */
+#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 		local_timer_interrupt(0, NULL);
+		irq_exit();
 		break;
 	case LINUX_SMP_IPI:
 		switch ((int)arg_copy) {
@@ -968,8 +977,11 @@ static void ipi_irq_dispatch(void)
 
 static struct irqaction irq_ipi;
 
-static void setup_cross_vpe_interrupts(void)
+static void setup_cross_vpe_interrupts(unsigned int nvpe)
 {
+	if (nvpe < 1)
+		return;
+
 	if (!cpu_has_vint)
 		panic("SMTC Kernel requires Vectored Interupt support");
 
@@ -987,10 +999,17 @@ static void setup_cross_vpe_interrupts(void)
 
 /*
  * SMTC-specific hacks invoked from elsewhere in the kernel.
+ *
+ * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
+ * called with interrupts disabled.  We do rely on interrupts being disabled
+ * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
+ * result in a recursive call to raw_local_irq_restore().
  */
 
-void smtc_ipi_replay(void)
+static void __smtc_ipi_replay(void)
 {
+	unsigned int cpu = smp_processor_id();
+
 	/*
 	 * To the extent that we've ever turned interrupts off,
 	 * we may have accumulated deferred IPIs.  This is subtle.
@@ -1005,22 +1024,35 @@ void smtc_ipi_replay(void)
 	 * is clear, and we'll handle it as a real pseudo-interrupt
 	 * and not a pseudo-pseudo interrupt.
 	 */
-	if (IPIQ[smp_processor_id()].depth > 0) {
-		struct smtc_ipi *pipi;
-		extern void self_ipi(struct smtc_ipi *);
+	if (IPIQ[cpu].depth > 0) {
+		while (1) {
+			struct smtc_ipi_q *q = &IPIQ[cpu];
+			struct smtc_ipi *pipi;
+			extern void self_ipi(struct smtc_ipi *);
+
+			spin_lock(&q->lock);
+			pipi = __smtc_ipi_dq(q);
+			spin_unlock(&q->lock);
+			if (!pipi)
+				break;
 
-		while ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()]))) {
 			self_ipi(pipi);
-			smtc_cpu_stats[smp_processor_id()].selfipis++;
+			smtc_cpu_stats[cpu].selfipis++;
 		}
 	}
 }
 
+void smtc_ipi_replay(void)
+{
+	raw_local_irq_disable();
+	__smtc_ipi_replay();
+}
+
 EXPORT_SYMBOL(smtc_ipi_replay);
 
 void smtc_idle_loop_hook(void)
 {
-#ifdef SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 	int im;
 	int flags;
 	int mtflags;
@@ -1113,14 +1145,20 @@ void smtc_idle_loop_hook(void)
 	local_irq_restore(flags);
 	if (pdb_msg != &id_ho_db_msg[0])
 		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
-#endif /* SMTC_IDLE_HOOK_DEBUG */
+#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
 
 	/*
 	 * Replay any accumulated deferred IPIs. If "Instant Replay"
 	 * is in use, there should never be any.
 	 */
 #ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-	smtc_ipi_replay();
+	{
+		unsigned long flags;
+
+		local_irq_save(flags);
+		__smtc_ipi_replay();
+		local_irq_restore(flags);
+	}
 #endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
 }
 
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 2a932cada244..493cb29b8a42 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -229,6 +229,9 @@ void show_regs(struct pt_regs *regs)
 			printk("\n");
 	}
 
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	printk("Acx    : %0*lx\n", field, regs->acx);
+#endif
 	printk("Hi    : %0*lx\n", field, regs->hi);
 	printk("Lo    : %0*lx\n", field, regs->lo);
 
@@ -340,13 +343,9 @@ NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
 extern const struct exception_table_entry __start___dbe_table[];
 extern const struct exception_table_entry __stop___dbe_table[];
 
-void __declare_dbe_table(void)
-{
-	__asm__ __volatile__(
-	".section\t__dbe_table,\"a\"\n\t"
-	".previous"
-	);
-}
+__asm__(
+"	.section	__dbe_table, \"a\"\n"
+"	.previous			\n");
 
 /* Given an address, look for it in the exception tables. */
 static const struct exception_table_entry *search_dbe_tables(unsigned long addr)
@@ -611,16 +610,6 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 	if (fcr31 & FPU_CSR_UNI_X) {
 		int sig;
 
-		preempt_disable();
-
-#ifdef CONFIG_PREEMPT
-		if (!is_fpu_owner()) {
-			/* We might lose fpu before disabling preempt... */
-			own_fpu();
-			BUG_ON(!used_math());
-			restore_fp(current);
-		}
-#endif
 		/*
 		 * Unimplemented operation exception.  If we've got the full
 		 * software emulator on-board, let's use it...
@@ -631,18 +620,12 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		 * register operands before invoking the emulator, which seems
 		 * a bit extreme for what should be an infrequent event.
 		 */
-		save_fp(current);
 		/* Ensure 'resume' not overwrite saved fp context again. */
-		lose_fpu();
-
-		preempt_enable();
+		lose_fpu(1);
 
 		/* Run the emulator */
 		sig = fpu_emulator_cop1Handler (regs, &current->thread.fpu, 1);
 
-		preempt_disable();
-
-		own_fpu();	/* Using the FPU again.  */
 		/*
 		 * We can't allow the emulated instruction to leave any of
 		 * the cause bit set in $fcr31.
@@ -650,9 +633,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
 
 		/* Restore the hardware register state */
-		restore_fp(current);
-
-		preempt_enable();
+		own_fpu(1);	/* Using the FPU again.  */
 
 		/* If something went wrong, signal */
 		if (sig)
@@ -669,7 +650,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	unsigned int opcode, bcode;
 	siginfo_t info;
 
-	if (get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
 		goto out_sigsegv;
 
 	/*
@@ -708,6 +689,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 		die_if_kernel("Break instruction in kernel code", regs);
 		force_sig(SIGTRAP, current);
 	}
+	return;
 
 out_sigsegv:
 	force_sig(SIGSEGV, current);
@@ -718,7 +700,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 	unsigned int opcode, tcode = 0;
 	siginfo_t info;
 
-	if (get_user(opcode, (unsigned int __user *) exception_epc(regs)))
+	if (__get_user(opcode, (unsigned int __user *) exception_epc(regs)))
 		goto out_sigsegv;
 
 	/* Immediate versions don't provide a code.  */
@@ -751,6 +733,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 		die_if_kernel("Trap instruction in kernel code", regs);
 		force_sig(SIGTRAP, current);
 	}
+	return;
 
 out_sigsegv:
 	force_sig(SIGSEGV, current);
@@ -790,21 +773,15 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		break;
 
 	case 1:
-		preempt_disable();
-
-		own_fpu();
-		if (used_math()) {	/* Using the FPU again.  */
-			restore_fp(current);
-		} else {			/* First time FPU user.  */
+		if (used_math())	/* Using the FPU again.  */
+			own_fpu(1);
+		else {			/* First time FPU user.  */
 			init_fpu();
 			set_used_math();
 		}
 
-		if (cpu_has_fpu) {
-			preempt_enable();
-		} else {
+		if (!raw_cpu_has_fpu) {
 			int sig;
-			preempt_enable();
 			sig = fpu_emulator_cop1Handler(regs,
 						&current->thread.fpu, 0);
 			if (sig)
@@ -845,7 +822,6 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 	case 2:
 	case 3:
-		die_if_kernel("do_cpu invoked from kernel context!", regs);
 		break;
 	}
 
@@ -1258,26 +1234,26 @@ static inline void mips_srs_init(void)
 /*
  * This is used by native signal handling
  */
-asmlinkage int (*save_fp_context)(struct sigcontext *sc);
-asmlinkage int (*restore_fp_context)(struct sigcontext *sc);
+asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
+asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
 
-extern asmlinkage int _save_fp_context(struct sigcontext *sc);
-extern asmlinkage int _restore_fp_context(struct sigcontext *sc);
+extern asmlinkage int _save_fp_context(struct sigcontext __user *sc);
+extern asmlinkage int _restore_fp_context(struct sigcontext __user *sc);
 
-extern asmlinkage int fpu_emulator_save_context(struct sigcontext *sc);
-extern asmlinkage int fpu_emulator_restore_context(struct sigcontext *sc);
+extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc);
+extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc);
 
 #ifdef CONFIG_SMP
-static int smp_save_fp_context(struct sigcontext *sc)
+static int smp_save_fp_context(struct sigcontext __user *sc)
 {
-	return cpu_has_fpu
+	return raw_cpu_has_fpu
 	       ? _save_fp_context(sc)
 	       : fpu_emulator_save_context(sc);
 }
 
-static int smp_restore_fp_context(struct sigcontext *sc)
+static int smp_restore_fp_context(struct sigcontext __user *sc)
 {
-	return cpu_has_fpu
+	return raw_cpu_has_fpu
 	       ? _restore_fp_context(sc)
 	       : fpu_emulator_restore_context(sc);
 }
@@ -1305,14 +1281,14 @@ static inline void signal_init(void)
 /*
  * This is used by 32-bit signal stuff on the 64-bit kernel
  */
-asmlinkage int (*save_fp_context32)(struct sigcontext32 *sc);
-asmlinkage int (*restore_fp_context32)(struct sigcontext32 *sc);
+asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
+asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
 
-extern asmlinkage int _save_fp_context32(struct sigcontext32 *sc);
-extern asmlinkage int _restore_fp_context32(struct sigcontext32 *sc);
+extern asmlinkage int _save_fp_context32(struct sigcontext32 __user *sc);
+extern asmlinkage int _restore_fp_context32(struct sigcontext32 __user *sc);
 
-extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 *sc);
-extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 *sc);
+extern asmlinkage int fpu_emulator_save_context32(struct sigcontext32 __user *sc);
+extern asmlinkage int fpu_emulator_restore_context32(struct sigcontext32 __user *sc);
 
 static inline void signal32_init(void)
 {
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 7e7d54823486..24b7b053cfe9 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -515,7 +515,7 @@ asmlinkage void do_ade(struct pt_regs *regs)
 		goto sigbus;
 
 	pc = (unsigned int __user *) exception_epc(regs);
-	if ((current->thread.mflags & MF_FIXADE) == 0)
+	if (user_mode(regs) && (current->thread.mflags & MF_FIXADE) == 0)
 		goto sigbus;
 
 	/*
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 9aca871a307f..c9ee9d2d5856 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1079,6 +1079,7 @@ static int getcwd(char *buff, int size)
 static int vpe_open(struct inode *inode, struct file *filp)
 {
 	int minor, ret;
+	enum vpe_state state;
 	struct vpe *v;
 	struct vpe_notifications *not;
 
@@ -1093,7 +1094,8 @@ static int vpe_open(struct inode *inode, struct file *filp)
 		return -ENODEV;
 	}
 
-	if (v->state != VPE_STATE_UNUSED) {
+	state = xchg(&v->state, VPE_STATE_INUSE);
+	if (state != VPE_STATE_UNUSED) {
 		dvpe();
 
 		printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
@@ -1108,9 +1110,6 @@ static int vpe_open(struct inode *inode, struct file *filp)
 		cleanup_tc(get_tc(minor));
 	}
 
-	// allocate it so when we get write ops we know it's expected.
-	v->state = VPE_STATE_INUSE;
-
 	/* this of-course trashes what was there before... */
 	v->pbuffer = vmalloc(P_SIZE);
 	v->plen = P_SIZE;
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index d425120b0282..fbe9a87bd0ad 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -110,12 +110,13 @@ int lasat_init_board_info(void)
 		    sizeof(struct lasat_eeprom_struct) - 4);
 
 	if (crc != lasat_board_info.li_eeprom_info.crc32) {
-		prom_printf("WARNING...\nWARNING...\nEEPROM CRC does not match calculated, attempting to soldier on...\n");
+		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does "
+		       "not match calculated, attempting to soldier on...\n");
 	}
 
-	if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION)
-	{
-		prom_printf("WARNING...\nWARNING...\nEEPROM version %d, wanted version %d, attempting to soldier on...\n",
+	if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) {
+		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version "
+		       "%d, wanted version %d, attempting to soldier on...\n",
 		       (unsigned int)lasat_board_info.li_eeprom_info.version,
 		       LASAT_EEPROM_VERSION);
 	}
@@ -124,7 +125,9 @@ int lasat_init_board_info(void)
 	cfg1 = lasat_board_info.li_eeprom_info.cfg[1];
 
 	if ( LASAT_W0_DSCTYPE(cfg0) != 1) {
-		prom_printf("WARNING...\nWARNING...\nInvalid configuration read from EEPROM, attempting to soldier on...");
+		printk(KERN_WARNING "WARNING...\nWARNING...\n"
+		       "Invalid configuration read from EEPROM, attempting to "
+		       "soldier on...");
 	}
 	/* We have a valid configuration */
 
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index d47692f73a26..812c6ac366be 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -23,10 +23,6 @@
 #define PROM_PUTC_ADDR		PROM_JUMP_TABLE_ENTRY(1)
 #define PROM_MONITOR_ADDR	PROM_JUMP_TABLE_ENTRY(2)
 
-static void null_prom_printf(const char * fmt, ...)
-{
-}
-
 static void null_prom_display(const char *string, int pos, int clear)
 {
 }
@@ -40,50 +36,29 @@ static void null_prom_putc(char c)
 }
 
 /* these are functions provided by the bootloader */
-static void (* prom_putc)(char c) = null_prom_putc;
-void (* prom_printf)(const char * fmt, ...) = null_prom_printf;
+static void (* __prom_putc)(char c) = null_prom_putc;
+
+void prom_putchar(char c)
+{
+	__prom_putc(c);
+}
+
 void (* prom_display)(const char *string, int pos, int clear) =
 		null_prom_display;
 void (* prom_monitor)(void) = null_prom_monitor;
 
 unsigned int lasat_ndelay_divider;
 
-#define PROM_PRINTFBUF_SIZE 256
-static char prom_printfbuf[PROM_PRINTFBUF_SIZE];
-
-static void real_prom_printf(const char * fmt, ...)
-{
-	va_list ap;
-	int len;
-	char *c = prom_printfbuf;
-	int i;
-
-	va_start(ap, fmt);
-	len = vsnprintf(prom_printfbuf, PROM_PRINTFBUF_SIZE, fmt, ap);
-	va_end(ap);
-
-	/* output overflowed the buffer */
-	if (len < 0 || len > PROM_PRINTFBUF_SIZE)
-		len = PROM_PRINTFBUF_SIZE;
-
-	for (i=0; i < len; i++) {
-		if (*c == '\n')
-			prom_putc('\r');
-		prom_putc(*c++);
-	}
-}
-
 static void setup_prom_vectors(void)
 {
 	u32 version = *(u32 *)(RESET_VECTOR + 0x90);
 
 	if (version >= 307) {
 		prom_display = (void *)PROM_DISPLAY_ADDR;
-		prom_putc = (void *)PROM_PUTC_ADDR;
-		prom_printf = real_prom_printf;
+		__prom_putc = (void *)PROM_PUTC_ADDR;
 		prom_monitor = (void *)PROM_MONITOR_ADDR;
 	}
-	prom_printf("prom vectors set up\n");
+	printk("prom vectors set up\n");
 }
 
 static struct at93c_defs at93c_defs[N_MACHTYPES] = {
@@ -101,11 +76,11 @@ void __init prom_init(void)
 	setup_prom_vectors();
 
 	if (current_cpu_data.cputype == CPU_R5000) {
-	        prom_printf("LASAT 200 board\n");
+	        printk("LASAT 200 board\n");
 		mips_machtype = MACH_LASAT_200;
                 lasat_ndelay_divider = LASAT_200_DIVIDER;
         } else {
-	        prom_printf("LASAT 100 board\n");
+	        printk("LASAT 100 board\n");
 		mips_machtype = MACH_LASAT_100;
                 lasat_ndelay_divider = LASAT_100_DIVIDER;
         }
diff --git a/arch/mips/lasat/prom.h b/arch/mips/lasat/prom.h
index 07be7bf1e4a3..019d45fbd268 100644
--- a/arch/mips/lasat/prom.h
+++ b/arch/mips/lasat/prom.h
@@ -2,5 +2,4 @@
 #define PROM_H
 extern void (* prom_display)(const char *string, int pos, int clear);
 extern void (* prom_monitor)(void);
-extern void (* prom_printf)(const char * fmt, ...);
 #endif
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index 14c55168f1ff..488007f13988 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -116,7 +116,6 @@ static void lasat_time_init(void)
 
 void __init plat_timer_setup(struct irqaction *irq)
 {
-	write_c0_compare( read_c0_count() + mips_hpt_frequency / HZ);
 	change_c0_status(ST0_IM, IE_IRQ0 | IE_IRQ5);
 }
 
@@ -179,5 +178,5 @@ void __init plat_mem_setup(void)
 	/* Switch from prom exception handler to normal mode */
 	change_c0_status(ST0_BEV,0);
 
-	prom_printf("Lasat specific initialization complete\n");
+	pr_info("Lasat specific initialization complete\n");
 }
diff --git a/arch/mips/lib-32/Makefile b/arch/mips/lib-32/Makefile
index 2036cf5e6857..8b94d4cc5a30 100644
--- a/arch/mips/lib-32/Makefile
+++ b/arch/mips/lib-32/Makefile
@@ -21,5 +21,3 @@ obj-$(CONFIG_CPU_SB1)		+= dump_tlb.o
 obj-$(CONFIG_CPU_TX39XX)	+= r3k_dump_tlb.o
 obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/lib-64/Makefile b/arch/mips/lib-64/Makefile
index 2036cf5e6857..8b94d4cc5a30 100644
--- a/arch/mips/lib-64/Makefile
+++ b/arch/mips/lib-64/Makefile
@@ -21,5 +21,3 @@ obj-$(CONFIG_CPU_SB1)		+= dump_tlb.o
 obj-$(CONFIG_CPU_TX39XX)	+= r3k_dump_tlb.o
 obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 5ad501b30b43..d7d3b14dcfb2 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -2,12 +2,11 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o memcpy.o memset.o promlib.o \
-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
+lib-y	+= csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
+	   strncpy_user.o strnlen_user.o uncached.o
 
-obj-y	+= iomap.o
+obj-y			+= iomap.o
+obj-$(CONFIG_PCI)	+= iomap-pci.o
 
 # libgcc-style stuff needed in the kernel
 lib-y += ashldi3.o ashrdi3.o lshrdi3.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
new file mode 100644
index 000000000000..c11b2494bb6e
--- /dev/null
+++ b/arch/mips/lib/iomap-pci.c
@@ -0,0 +1,74 @@
+/*
+ * Implement the default iomap interfaces
+ *
+ * (C) Copyright 2004 Linus Torvalds
+ * (C) Copyright 2006 Ralf Baechle <ralf@linux-mips.org>
+ * (C) Copyright 2007 MIPS Technologies, Inc.
+ *     written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+static void __iomem *ioport_map_pci(struct pci_dev *dev,
+                                     unsigned long port, unsigned int nr)
+{
+	struct pci_controller *ctrl = dev->bus->sysdata;
+	unsigned long base = ctrl->io_map_base;
+
+	/* This will eventually become a BUG_ON but for now be gentle */
+	if (unlikely(!ctrl->io_map_base)) {
+		struct pci_bus *bus = dev->bus;
+		char name[8];
+
+		while (bus->parent)
+			bus = bus->parent;
+
+		ctrl->io_map_base = base = mips_io_port_base;
+
+		sprintf(name, "%04x:%02x", pci_domain_nr(bus), bus->number);
+		printk(KERN_WARNING "io_map_base of root PCI bus %s unset.  "
+		       "Trying to continue but you better\nfix this issue or "
+		       "report it to linux-mips@linux-mips.org or your "
+		       "vendor.\n", name);
+#ifdef CONFIG_PCI_DOMAINS
+		panic("To avoid data corruption io_map_base MUST be set with "
+		      "multiple PCI domains.");
+#endif
+	}
+
+	return (void __iomem *) (ctrl->io_map_base + port);
+}
+
+/*
+ * Create a virtual mapping cookie for a PCI BAR (memory or IO)
+ */
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len || !start)
+		return NULL;
+	if (maxlen && len > maxlen)
+		len = maxlen;
+	if (flags & IORESOURCE_IO)
+		return ioport_map_pci(dev, start, len);
+	if (flags & IORESOURCE_MEM) {
+		if (flags & IORESOURCE_CACHEABLE)
+			return ioremap(start, len);
+		return ioremap_nocache(start, len);
+	}
+	/* What? */
+	return NULL;
+}
+
+EXPORT_SYMBOL(pci_iomap);
+
+void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
+{
+	iounmap(addr);
+}
+
+EXPORT_SYMBOL(pci_iounmap);
diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c
index f4ac5bbcd81f..d51d5cb0a4a9 100644
--- a/arch/mips/lib/iomap.c
+++ b/arch/mips/lib/iomap.c
@@ -1,78 +1,227 @@
 /*
- *  iomap.c, Memory Mapped I/O routines for MIPS architecture.
+ * Implement the default iomap interfaces
  *
- *  This code is based on lib/iomap.c, by Linus Torvalds.
- *
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
+ * (C) Copyright 2004 Linus Torvalds
+ * (C) Copyright 2006 Ralf Baechle <ralf@linux-mips.org>
+ * (C) Copyright 2007 MIPS Technologies, Inc.
+ *     written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+/*
+ * Read/write from/to an (offsettable) iomem cookie. It might be a PIO
+ * access or a MMIO access, these functions don't care. The info is
+ * encoded in the hardware mapping set up by the mapping functions
+ * (or the cookie itself, depending on implementation and hw).
  *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
+ * The generic routines don't assume any hardware mappings, and just
+ * encode the PIO/MMIO as part of the cookie. They coldly assume that
+ * the MMIO IO mappings are not in the low address range.
  *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ * Architectures for which this is not true can't use this generic
+ * implementation and should do their own copy.
  */
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/pci.h>
 
-#include <asm/io.h>
+#define PIO_MASK	0x0ffffUL
 
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
+unsigned int ioread8(void __iomem *addr)
 {
-	unsigned long end;
+	return readb(addr);
+}
 
-	end = port + nr - 1UL;
-	if (ioport_resource.start > port ||
-	    ioport_resource.end < end || port > end)
-		return NULL;
+EXPORT_SYMBOL(ioread8);
 
-	return (void __iomem *)(mips_io_port_base + port);
+unsigned int ioread16(void __iomem *addr)
+{
+	return readw(addr);
 }
 
-void ioport_unmap(void __iomem *addr)
+EXPORT_SYMBOL(ioread16);
+
+unsigned int ioread16be(void __iomem *addr)
 {
+	return be16_to_cpu(__raw_readw(addr));
 }
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
 
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+EXPORT_SYMBOL(ioread16be);
+
+unsigned int ioread32(void __iomem *addr)
 {
-	unsigned long start, len, flags;
+	return readl(addr);
+}
 
-	if (dev == NULL)
-		return NULL;
+EXPORT_SYMBOL(ioread32);
 
-	start = pci_resource_start(dev, bar);
-	len = pci_resource_len(dev, bar);
-	if (!start || !len)
-		return NULL;
+unsigned int ioread32be(void __iomem *addr)
+{
+	return be32_to_cpu(__raw_readl(addr));
+}
 
-	if (maxlen != 0 && len > maxlen)
-		len = maxlen;
+EXPORT_SYMBOL(ioread32be);
+
+void iowrite8(u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
 
-	flags = pci_resource_flags(dev, bar);
-	if (flags & IORESOURCE_IO)
-		return ioport_map(start, len);
-	if (flags & IORESOURCE_MEM) {
-		if (flags & IORESOURCE_CACHEABLE)
-			return ioremap_cachable(start, len);
-		return ioremap_nocache(start, len);
+EXPORT_SYMBOL(iowrite8);
+
+void iowrite16(u16 val, void __iomem *addr)
+{
+	writew(val, addr);
+}
+
+EXPORT_SYMBOL(iowrite16);
+
+void iowrite16be(u16 val, void __iomem *addr)
+{
+	__raw_writew(cpu_to_be16(val), addr);
+}
+
+EXPORT_SYMBOL(iowrite16be);
+
+void iowrite32(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+
+EXPORT_SYMBOL(iowrite32);
+
+void iowrite32be(u32 val, void __iomem *addr)
+{
+	__raw_writel(cpu_to_be32(val), addr);
+}
+
+EXPORT_SYMBOL(iowrite32be);
+
+/*
+ * These are the "repeat MMIO read/write" functions.
+ * Note the "__raw" accesses, since we don't want to
+ * convert to CPU byte order. We write in "IO byte
+ * order" (we also don't have IO barriers).
+ */
+static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
+{
+	while (--count >= 0) {
+		u8 data = __raw_readb(addr);
+		*dst = data;
+		dst++;
 	}
+}
 
-	return NULL;
+static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
+{
+	while (--count >= 0) {
+		u16 data = __raw_readw(addr);
+		*dst = data;
+		dst++;
+	}
 }
 
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
 {
-	iounmap(addr);
+	while (--count >= 0) {
+		u32 data = __raw_readl(addr);
+		*dst = data;
+		dst++;
+	}
 }
-EXPORT_SYMBOL(pci_iomap);
-EXPORT_SYMBOL(pci_iounmap);
+
+static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writeb(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writew(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writel(*src, addr);
+		src++;
+	}
+}
+
+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insb(addr, dst, count);
+}
+
+EXPORT_SYMBOL(ioread8_rep);
+
+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insw(addr, dst, count);
+}
+
+EXPORT_SYMBOL(ioread16_rep);
+
+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insl(addr, dst, count);
+}
+
+EXPORT_SYMBOL(ioread32_rep);
+
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsb(addr, src, count);
+}
+
+EXPORT_SYMBOL(iowrite8_rep);
+
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsw(addr, src, count);
+}
+
+EXPORT_SYMBOL(iowrite16_rep);
+
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsl(addr, src, count);
+}
+
+EXPORT_SYMBOL(iowrite32_rep);
+
+/*
+ * Create a virtual mapping cookie for an IO port range
+ *
+ * This uses the same mapping are as the in/out family which has to be setup
+ * by the platform initialization code.
+ *
+ * Just to make matters somewhat more interesting on MIPS systems with
+ * multiple host bridge each will have it's own ioport address space.
+ */
+static void __iomem *ioport_map_legacy(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) (mips_io_port_base + port);
+}
+
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	if (port > PIO_MASK)
+		return NULL;
+
+	return ioport_map_legacy(port, nr);
+}
+
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	/* Nothing to do */
+}
+
+EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/mips/lib/memcpy-inatomic.S b/arch/mips/lib/memcpy-inatomic.S
new file mode 100644
index 000000000000..3a534b2baa0f
--- /dev/null
+++ b/arch/mips/lib/memcpy-inatomic.S
@@ -0,0 +1,436 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Unified implementation of memcpy, memmove and the __copy_user backend.
+ *
+ * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
+ * Copyright (C) 2002 Broadcom, Inc.
+ *   memcpy/copy_user author: Mark Vandevoorde
+ *
+ * Mnemonic names for arguments to memcpy/__copy_user
+ */
+
+/*
+ * Hack to resolve longstanding prefetch issue
+ *
+ * Prefetching may be fatal on some systems if we're prefetching beyond the
+ * end of memory on some systems.  It's also a seriously bad idea on non
+ * dma-coherent systems.
+ */
+#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+#ifdef CONFIG_MIPS_MALTA
+#undef CONFIG_CPU_HAS_PREFETCH
+#endif
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+
+#define dst a0
+#define src a1
+#define len a2
+
+/*
+ * Spec
+ *
+ * memcpy copies len bytes from src to dst and sets v0 to dst.
+ * It assumes that
+ *   - src and dst don't overlap
+ *   - src is readable
+ *   - dst is writable
+ * memcpy uses the standard calling convention
+ *
+ * __copy_user copies up to len bytes from src to dst and sets a2 (len) to
+ * the number of uncopied bytes due to an exception caused by a read or write.
+ * __copy_user assumes that src and dst don't overlap, and that the call is
+ * implementing one of the following:
+ *   copy_to_user
+ *     - src is readable  (no exceptions when reading src)
+ *   copy_from_user
+ *     - dst is writable  (no exceptions when writing dst)
+ * __copy_user uses a non-standard calling convention; see
+ * include/asm-mips/uaccess.h
+ *
+ * When an exception happens on a load, the handler must
+ # ensure that all of the destination buffer is overwritten to prevent
+ * leaking information to user mode programs.
+ */
+
+/*
+ * Implementation
+ */
+
+/*
+ * The exception handler for loads requires that:
+ *  1- AT contain the address of the byte just past the end of the source
+ *     of the copy,
+ *  2- src_entry <= src < AT, and
+ *  3- (dst - src) == (dst_entry - src_entry),
+ * The _entry suffix denotes values when __copy_user was called.
+ *
+ * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
+ * (2) is met by incrementing src by the number of bytes copied
+ * (3) is met by not doing loads between a pair of increments of dst and src
+ *
+ * The exception handlers for stores adjust len (if necessary) and return.
+ * These handlers do not need to overwrite any data.
+ *
+ * For __rmemcpy and memmove an exception is always a kernel bug, therefore
+ * they're not protected.
+ */
+
+#define EXC(inst_reg,addr,handler)		\
+9:	inst_reg, addr;				\
+	.section __ex_table,"a";		\
+	PTR	9b, handler;			\
+	.previous
+
+/*
+ * Only on the 64-bit kernel we can made use of 64-bit registers.
+ */
+#ifdef CONFIG_64BIT
+#define USE_DOUBLE
+#endif
+
+#ifdef USE_DOUBLE
+
+#define LOAD   ld
+#define LOADL  ldl
+#define LOADR  ldr
+#define STOREL sdl
+#define STORER sdr
+#define STORE  sd
+#define ADD    daddu
+#define SUB    dsubu
+#define SRL    dsrl
+#define SRA    dsra
+#define SLL    dsll
+#define SLLV   dsllv
+#define SRLV   dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+/*
+ * As we are sharing code base with the mips32 tree (which use the o32 ABI
+ * register definitions). We need to redefine the register definitions from
+ * the n64 ABI register naming to the o32 ABI register naming.
+ */
+#undef t0
+#undef t1
+#undef t2
+#undef t3
+#define t0	$8
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
+#define t5	$13
+#define t6	$14
+#define t7	$15
+
+#else
+
+#define LOAD   lw
+#define LOADL  lwl
+#define LOADR  lwr
+#define STOREL swl
+#define STORER swr
+#define STORE  sw
+#define ADD    addu
+#define SUB    subu
+#define SRL    srl
+#define SLL    sll
+#define SRA    sra
+#define SLLV   sllv
+#define SRLV   srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST  LOADL
+#define STFIRST STORER
+#define STREST  STOREL
+#define SHIFT_DISCARD SLLV
+#else
+#define LDFIRST LOADL
+#define LDREST  LOADR
+#define STFIRST STOREL
+#define STREST  STORER
+#define SHIFT_DISCARD SRLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit)  (FIRST(unit)+NBYTES-1)
+#define UNIT(unit)  FIRST(unit)
+
+#define ADDRMASK (NBYTES-1)
+
+	.text
+	.set	noreorder
+	.set	noat
+
+/*
+ * A combined memcpy/__copy_user
+ * __copy_user sets len to 0 for success; else to an upper bound of
+ * the number of uncopied bytes.
+ * memcpy sets v0 to dst.
+ */
+	.align	5
+LEAF(__copy_user_inatomic)
+	/*
+	 * Note: dst & src may be unaligned, len may be 0
+	 * Temps
+	 */
+#define rem t8
+
+	/*
+	 * The "issue break"s below are very approximate.
+	 * Issue delays for dcache fills will perturb the schedule, as will
+	 * load queue full replay traps, etc.
+	 *
+	 * If len < NBYTES use byte operations.
+	 */
+	PREF(	0, 0(src) )
+	PREF(	1, 0(dst) )
+	sltu	t2, len, NBYTES
+	and	t1, dst, ADDRMASK
+	PREF(	0, 1*32(src) )
+	PREF(	1, 1*32(dst) )
+	bnez	t2, copy_bytes_checklen
+	 and	t0, src, ADDRMASK
+	PREF(	0, 2*32(src) )
+	PREF(	1, 2*32(dst) )
+	bnez	t1, dst_unaligned
+	 nop
+	bnez	t0, src_unaligned_dst_aligned
+	/*
+	 * use delay slot for fall-through
+	 * src and dst are aligned; need to compute rem
+	 */
+both_aligned:
+	 SRL	t0, len, LOG_NBYTES+3    # +3 for 8 units/iter
+	beqz	t0, cleanup_both_aligned # len < 8*NBYTES
+	 and	rem, len, (8*NBYTES-1)	 # rem = len % (8*NBYTES)
+	PREF(	0, 3*32(src) )
+	PREF(	1, 3*32(dst) )
+	.align	4
+1:
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 8*NBYTES
+EXC(	LOAD	t4, UNIT(4)(src),	l_exc_copy)
+EXC(	LOAD	t7, UNIT(5)(src),	l_exc_copy)
+	STORE	t0, UNIT(0)(dst)
+	STORE	t1, UNIT(1)(dst)
+EXC(	LOAD	t0, UNIT(6)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(7)(src),	l_exc_copy)
+	ADD	src, src, 8*NBYTES
+	ADD	dst, dst, 8*NBYTES
+	STORE	t2, UNIT(-6)(dst)
+	STORE	t3, UNIT(-5)(dst)
+	STORE	t4, UNIT(-4)(dst)
+	STORE	t7, UNIT(-3)(dst)
+	STORE	t0, UNIT(-2)(dst)
+	STORE	t1, UNIT(-1)(dst)
+	PREF(	0, 8*32(src) )
+	PREF(	1, 8*32(dst) )
+	bne	len, rem, 1b
+	 nop
+
+	/*
+	 * len == rem == the number of bytes left to copy < 8*NBYTES
+	 */
+cleanup_both_aligned:
+	beqz	len, done
+	 sltu	t0, len, 4*NBYTES
+	bnez	t0, less_than_4units
+	 and	rem, len, (NBYTES-1)	# rem = len % NBYTES
+	/*
+	 * len >= 4*NBYTES
+	 */
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 4*NBYTES
+	ADD	src, src, 4*NBYTES
+	STORE	t0, UNIT(0)(dst)
+	STORE	t1, UNIT(1)(dst)
+	STORE	t2, UNIT(2)(dst)
+	STORE	t3, UNIT(3)(dst)
+	beqz	len, done
+	 ADD	dst, dst, 4*NBYTES
+less_than_4units:
+	/*
+	 * rem = len % NBYTES
+	 */
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LOAD	t0, 0(src),		l_exc)
+	ADD	src, src, NBYTES
+	SUB	len, len, NBYTES
+	STORE	t0, 0(dst)
+	bne	rem, len, 1b
+	 ADD	dst, dst, NBYTES
+
+	/*
+	 * src and dst are aligned, need to copy rem bytes (rem < NBYTES)
+	 * A loop would do only a byte at a time with possible branch
+	 * mispredicts.  Can't do an explicit LOAD dst,mask,or,STORE
+	 * because can't assume read-access to dst.  Instead, use
+	 * STREST dst, which doesn't require read access to dst.
+	 *
+	 * This code should perform better than a simple loop on modern,
+	 * wide-issue mips processors because the code has fewer branches and
+	 * more instruction-level parallelism.
+	 */
+#define bits t2
+	beqz	len, done
+	 ADD	t1, dst, len	# t1 is just past last byte of dst
+	li	bits, 8*NBYTES
+	SLL	rem, len, 3	# rem = number of bits to keep
+EXC(	LOAD	t0, 0(src),		l_exc)
+	SUB	bits, bits, rem	# bits = number of bits to discard
+	SHIFT_DISCARD t0, t0, bits
+	STREST	t0, -1(t1)
+	jr	ra
+	 move	len, zero
+dst_unaligned:
+	/*
+	 * dst is unaligned
+	 * t0 = src & ADDRMASK
+	 * t1 = dst & ADDRMASK; T1 > 0
+	 * len >= NBYTES
+	 *
+	 * Copy enough bytes to align dst
+	 * Set match = (src and dst have same alignment)
+	 */
+#define match rem
+EXC(	LDFIRST	t3, FIRST(0)(src),	l_exc)
+	ADD	t2, zero, NBYTES
+EXC(	LDREST	t3, REST(0)(src),	l_exc_copy)
+	SUB	t2, t2, t1	# t2 = number of bytes copied
+	xor	match, t0, t1
+	STFIRST t3, FIRST(0)(dst)
+	beq	len, t2, done
+	 SUB	len, len, t2
+	ADD	dst, dst, t2
+	beqz	match, both_aligned
+	 ADD	src, src, t2
+
+src_unaligned_dst_aligned:
+	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	PREF(	0, 3*32(src) )
+	beqz	t0, cleanup_src_unaligned
+	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+	PREF(	1, 3*32(dst) )
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
+	SUB     len, len, 4*NBYTES
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
+EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
+EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
+EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
+EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
+	PREF(	0, 9*32(src) )		# 0 is PREF_LOAD  (not streamed)
+	ADD	src, src, 4*NBYTES
+#ifdef CONFIG_CPU_SB1
+	nop				# improves slotting
+#endif
+	STORE	t0, UNIT(0)(dst)
+	STORE	t1, UNIT(1)(dst)
+	STORE	t2, UNIT(2)(dst)
+	STORE	t3, UNIT(3)(dst)
+	PREF(	1, 9*32(dst) )     	# 1 is PREF_STORE (not streamed)
+	bne	len, rem, 1b
+	 ADD	dst, dst, 4*NBYTES
+
+cleanup_src_unaligned:
+	beqz	len, done
+	 and	rem, len, NBYTES-1  # rem = len % NBYTES
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+	ADD	src, src, NBYTES
+	SUB	len, len, NBYTES
+	STORE	t0, 0(dst)
+	bne	len, rem, 1b
+	 ADD	dst, dst, NBYTES
+
+copy_bytes_checklen:
+	beqz	len, done
+	 nop
+copy_bytes:
+	/* 0 < len < NBYTES  */
+#define COPY_BYTE(N)			\
+EXC(	lb	t0, N(src), l_exc);	\
+	SUB	len, len, 1;		\
+	beqz	len, done;		\
+	 sb	t0, N(dst)
+
+	COPY_BYTE(0)
+	COPY_BYTE(1)
+#ifdef USE_DOUBLE
+	COPY_BYTE(2)
+	COPY_BYTE(3)
+	COPY_BYTE(4)
+	COPY_BYTE(5)
+#endif
+EXC(	lb	t0, NBYTES-2(src), l_exc)
+	SUB	len, len, 1
+	jr	ra
+	 sb	t0, NBYTES-2(dst)
+done:
+	jr	ra
+	 nop
+	END(__copy_user_inatomic)
+
+l_exc_copy:
+	/*
+	 * Copy bytes from src until faulting load address (or until a
+	 * lb faults)
+	 *
+	 * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
+	 * may be more than a byte beyond the last address.
+	 * Hence, the lb below may get an exception.
+	 *
+	 * Assumes src < THREAD_BUADDR($28)
+	 */
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)
+1:
+EXC(	lb	t1, 0(src),	l_exc)
+	ADD	src, src, 1
+	sb	t1, 0(dst)	# can't fault -- we're copy_from_user
+	bne	src, t0, 1b
+	 ADD	dst, dst, 1
+l_exc:
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)	# t0 is just past last good address
+	 nop
+	SUB	len, AT, t0		# len number of uncopied bytes
+	jr	ra
+	 nop
diff --git a/arch/mips/lib/promlib.c b/arch/mips/lib/promlib.c
deleted file mode 100644
index dddfe98b4ded..000000000000
--- a/arch/mips/lib/promlib.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <stdarg.h>
-#include <linux/kernel.h>
-
-extern void prom_putchar(char);
-
-void prom_printf(char *fmt, ...)
-{
-	va_list args;
-	char ppbuf[1024];
-	char *bptr;
-
-	va_start(args, fmt);
-	vsprintf(ppbuf, fmt, args);
-
-	bptr = ppbuf;
-
-	while (*bptr != 0) {
-		if (*bptr == '\n')
-			prom_putchar('\r');
-
-		prom_putchar(*bptr++);
-	}
-	va_end(args);
-}
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index 5b3390f64917..ed49ef01ac53 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -51,7 +51,7 @@ void fpu_emulator_init_fpu(void)
  * with appropriate macros from uaccess.h
  */
 
-int fpu_emulator_save_context(struct sigcontext *sc)
+int fpu_emulator_save_context(struct sigcontext __user *sc)
 {
 	int i;
 	int err = 0;
@@ -65,7 +65,7 @@ int fpu_emulator_save_context(struct sigcontext *sc)
 	return err;
 }
 
-int fpu_emulator_restore_context(struct sigcontext *sc)
+int fpu_emulator_restore_context(struct sigcontext __user *sc)
 {
 	int i;
 	int err = 0;
@@ -84,7 +84,7 @@ int fpu_emulator_restore_context(struct sigcontext *sc)
  * This is the o32 version
  */
 
-int fpu_emulator_save_context32(struct sigcontext32 *sc)
+int fpu_emulator_save_context32(struct sigcontext32 __user *sc)
 {
 	int i;
 	int err = 0;
@@ -98,7 +98,7 @@ int fpu_emulator_save_context32(struct sigcontext32 *sc)
 	return err;
 }
 
-int fpu_emulator_restore_context32(struct sigcontext32 *sc)
+int fpu_emulator_restore_context32(struct sigcontext32 __user *sc)
 {
 	int i;
 	int err = 0;
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile
index be47c1c2bc80..aade36d78787 100644
--- a/arch/mips/mips-boards/generic/Makefile
+++ b/arch/mips/mips-boards/generic/Makefile
@@ -18,9 +18,9 @@
 # Makefile for the MIPS boards generic routines under Linux.
 #
 
-obj-y				:= reset.o display.o init.o memory.o printf.o \
+obj-y				:= reset.o display.o init.o memory.o \
 				   cmdline.o time.o
+
+obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_KGDB)		+= gdb_hook.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/mips-boards/generic/printf.c b/arch/mips/mips-boards/generic/console.c
index 1a711bd79b51..4d8ab99e4155 100644
--- a/arch/mips/mips-boards/generic/printf.c
+++ b/arch/mips/mips-boards/generic/console.c
@@ -17,10 +17,9 @@
  *
  * Putting things on the screen/serial line using YAMONs facilities.
  */
+#include <linux/console.h>
 #include <linux/init.h>
-#include <linux/kernel.h>
 #include <linux/serial_reg.h>
-#include <linux/spinlock.h>
 #include <asm/io.h>
 
 #ifdef CONFIG_MIPS_ATLAS
@@ -67,12 +66,3 @@ int prom_putchar(char c)
 
 	return 1;
 }
-
-char prom_getchar(void)
-{
-	while (!(serial_in(UART_LSR) & UART_LSR_DR))
-		;
-
-	return serial_in(UART_RX);
-}
-
diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c
index f653946afc23..548dbe5ce7c8 100644
--- a/arch/mips/mips-boards/generic/display.c
+++ b/arch/mips/mips-boards/generic/display.c
@@ -24,16 +24,16 @@
 
 void mips_display_message(const char *str)
 {
-	static volatile unsigned int *display = NULL;
+	static unsigned int __iomem *display = NULL;
 	int i;
 
 	if (unlikely(display == NULL))
-		display = (volatile unsigned int *)ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
+		display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
 
 	for (i = 0; i <= 14; i=i+2) {
 	         if (*str)
-		         display[i] = *str++;
+		         writel(*str++, display + i);
 		 else
-		         display[i] = ' ';
+		         writel(' ', display + i);
 	}
 }
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index 58a0fe883591..88e9c2a7a2f9 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -145,7 +145,7 @@ static void __init console_config(void)
 	char parity = '\0', bits = '\0', flow = '\0';
 	char *s;
 
-	if ((strstr(prom_getcmdline(), "console=ttyS")) == NULL) {
+	if ((strstr(prom_getcmdline(), "console=")) == NULL) {
 		s = prom_getenv("modetty0");
 		if (s) {
 			while (*s >= '0' && *s <= '9')
@@ -167,7 +167,7 @@ static void __init console_config(void)
 			flow = 'r';
 		sprintf (console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow);
 		strcat (prom_getcmdline(), console_string);
-		prom_printf("Config serial console:%s\n", console_string);
+		pr_info("Config serial console:%s\n", console_string);
 	}
 }
 #endif
@@ -210,8 +210,9 @@ void __init kgdb_config (void)
 			generic_getDebugChar = rs_getDebugChar;
 		}
 
-		prom_printf("KGDB: Using serial line /dev/ttyS%d at %d for session, "
-			    "please connect your debugger\n", line ? 1 : 0, speed);
+		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
+		        "session, please connect your debugger\n",
+		        line ? 1 : 0, speed);
 
 		{
 			char *s;
@@ -250,8 +251,6 @@ void __init mips_ejtag_setup (void)
 
 void __init prom_init(void)
 {
-	u32 start, map, mask, data;
-
 	prom_argc = fw_arg0;
 	_prom_argv = (int *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
@@ -277,6 +276,8 @@ void __init prom_init(void)
 			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC;
 	}
 	switch(mips_revision_corid) {
+		u32 start, map, mask, data;
+
 	case MIPS_REVISION_CORID_QED_RM5261:
 	case MIPS_REVISION_CORID_CORE_LV:
 	case MIPS_REVISION_CORID_CORE_FPGA:
@@ -382,7 +383,7 @@ void __init prom_init(void)
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
-	prom_printf("\nLINUX started...\n");
+	pr_info("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index ebf0e16c5a0d..ae39953da2c4 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -59,11 +59,12 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 	/* otherwise look in the environment */
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {
-		prom_printf("memsize not set in boot prom, set to default (32Mb)\n");
+		printk(KERN_WARNING
+		       "memsize not set in boot prom, set to default (32Mb)\n");
 		physical_memsize = 0x02000000;
 	} else {
 #ifdef DEBUG
-		prom_printf("prom_memsize = %s\n", memsize_str);
+		pr_debug("prom_memsize = %s\n", memsize_str);
 #endif
 		physical_memsize = simple_strtol(memsize_str, NULL, 0);
 	}
@@ -141,12 +142,12 @@ void __init prom_meminit(void)
 	struct prom_pmemblock *p;
 
 #ifdef DEBUG
-	prom_printf("YAMON MEMORY DESCRIPTOR dump:\n");
+	pr_debug("YAMON MEMORY DESCRIPTOR dump:\n");
 	p = prom_getmdesc();
 	while (p->size) {
 		int i = 0;
-		prom_printf("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n",
-			    i, p, p->base, p->size, mtypes[p->type]);
+		pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n",
+			 i, p, p->base, p->size, mtypes[p->type]);
 		p++;
 		i++;
 	}
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 3192a14698c8..f98d60f78658 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -65,7 +65,7 @@ static struct resource msc_io_resource = {
 };
 
 extern struct pci_ops bonito64_pci_ops;
-extern struct pci_ops gt64120_pci_ops;
+extern struct pci_ops gt64xxx_pci0_ops;
 extern struct pci_ops msc_pci_ops;
 
 static struct pci_controller bonito64_controller = {
@@ -76,7 +76,7 @@ static struct pci_controller bonito64_controller = {
 };
 
 static struct pci_controller gt64120_controller = {
-	.pci_ops	= &gt64120_pci_ops,
+	.pci_ops	= &gt64xxx_pci0_ops,
 	.io_resource	= &gt64120_io_resource,
 	.mem_resource	= &gt64120_mem_resource,
 };
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
index 0996ba368b2a..7a1bb51f81ee 100644
--- a/arch/mips/mips-boards/generic/reset.c
+++ b/arch/mips/mips-boards/generic/reset.c
@@ -39,24 +39,24 @@ static void atlas_machine_power_off(void);
 
 static void mips_machine_restart(char *command)
 {
-        volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int));
+	unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
 
-	*softres_reg = GORESET;
+	writew(GORESET, softres_reg);
 }
 
 static void mips_machine_halt(void)
 {
-        volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int));
+        unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int));
 
-	*softres_reg = GORESET;
+	writew(GORESET, softres_reg);
 }
 
 #if defined(CONFIG_MIPS_ATLAS)
 static void atlas_machine_power_off(void)
 {
-        volatile unsigned int *psustby_reg = (unsigned int *)ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
+	unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
 
-	*psustby_reg = ATLAS_GOSTBY;
+	writew(ATLAS_GOSTBY, psustby_reg);
 }
 #endif
 
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index a3c3a1d462b2..df2a2bd3aa5d 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -295,7 +295,4 @@ void __init plat_timer_setup(struct irqaction *irq)
 	irq_desc[mips_cpu_timer_irq].status |= IRQ_PER_CPU;
 	set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
 #endif
-
-        /* to generate the first timer interrupt */
-	write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
 }
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index cb7f349b0514..377d9e8f250a 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -21,4 +21,4 @@
 
 obj-y := malta_int.o malta_setup.o
 obj-$(CONFIG_MTD) += malta_mtd.o
-obj-$(CONFIG_SMP) += malta_smp.o
+obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index 3c206bb17160..83d76025d61d 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -42,8 +42,6 @@
 #include <asm/mips-boards/msc01_pci.h>
 #include <asm/msc01_ic.h>
 
-extern void mips_timer_interrupt(void);
-
 static DEFINE_SPINLOCK(mips_irq_lock);
 
 static inline int mips_pcibios_iack(void)
@@ -85,7 +83,7 @@ static inline int mips_pcibios_iack(void)
 		dummy = BONITO_PCIMAP_CFG;
 		iob();    /* sync */
 
-		irq = *(volatile u32 *)(_pcictrl_bonito_pcicfg);
+		irq = readl((u32 *)_pcictrl_bonito_pcicfg);
 		iob();    /* sync */
 		irq &= 0xff;
 		BONITO_PCIMAP_CFG = 0;
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
index 56ea76679cd4..7873932532a1 100644
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ b/arch/mips/mips-boards/malta/malta_setup.c
@@ -145,7 +145,8 @@ void __init plat_mem_setup(void)
 #ifdef CONFIG_BLK_DEV_IDE
 	/* Check PCI clock */
 	{
-		int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07;
+		unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
+		int jmpr = (readw(jmpr_p) >> 2) & 0x07;
 		static const int pciclocks[] __initdata = {
 			33, 20, 25, 30, 12, 16, 37, 10
 		};
@@ -179,7 +180,6 @@ void __init plat_mem_setup(void)
 	};
 #endif
 #endif
-
 	mips_reboot_setup();
 
 	board_time_init = mips_time_init;
diff --git a/arch/mips/mips-boards/malta/malta_smp.c b/arch/mips/mips-boards/malta/malta_smtc.c
index cf967170fe29..d1c80f631100 100644
--- a/arch/mips/mips-boards/malta/malta_smp.c
+++ b/arch/mips/mips-boards/malta/malta_smtc.c
@@ -1,25 +1,14 @@
 /*
  * Malta Platform-specific hooks for SMP operation
  */
+#include <linux/init.h>
 
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-
-#include <asm/atomic.h>
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/hardirq.h>
-#include <asm/mmu_context.h>
-#include <asm/smp.h>
-#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
 #include <asm/smtc_ipi.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 /* VPE/SMP Prototype implements platform interfaces directly */
-#if !defined(CONFIG_MIPS_MT_SMP)
 
 /*
  * Cause the specified action to be performed on a targeted "CPU"
@@ -27,10 +16,8 @@
 
 void core_send_ipi(int cpu, unsigned int action)
 {
-/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
-#ifdef CONFIG_MIPS_MT_SMTC
+	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
 	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
-#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
@@ -39,9 +26,7 @@ void core_send_ipi(int cpu, unsigned int action)
 
 void prom_boot_secondary(int cpu, struct task_struct *idle)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
 	smtc_boot_secondary(cpu, idle);
-#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
@@ -50,7 +35,6 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
 
 void prom_init_secondary(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
         void smtc_init_secondary(void);
 	int myvpe;
 
@@ -65,7 +49,6 @@ void prom_init_secondary(void)
 	}
 
         smtc_init_secondary();
-#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
@@ -93,9 +76,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
 
 void prom_smp_finish(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
 	smtc_smp_finish();
-#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
@@ -105,5 +86,3 @@ void prom_smp_finish(void)
 void prom_cpus_done(void)
 {
 }
-
-#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sim/Makefile b/arch/mips/mips-boards/sim/Makefile
index a12e32aafde0..dc0bfda11427 100644
--- a/arch/mips/mips-boards/sim/Makefile
+++ b/arch/mips/mips-boards/sim/Makefile
@@ -1,5 +1,7 @@
 #
 # Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+# Copyright (C) 2007 MIPS Technologies, Inc.
+#   written by Ralf Baechle (ralf@linux-mips.org)
 #
 # This program is free software; you can distribute it and/or modify it
 # under the terms of the GNU General Public License (Version 2) as
@@ -15,5 +17,8 @@
 # 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
 #
 
-obj-y := sim_setup.o sim_mem.o sim_time.o sim_printf.o sim_int.o sim_cmdline.o
+obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
+	 sim_cmdline.o
+
+obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
 obj-$(CONFIG_SMP) += sim_smp.o
diff --git a/arch/mips/mips-boards/sim/sim_printf.c b/arch/mips/mips-boards/sim/sim_console.c
index 3ee5a0b501a6..de595a9ccb27 100644
--- a/arch/mips/mips-boards/sim/sim_printf.c
+++ b/arch/mips/mips-boards/sim/sim_console.c
@@ -1,7 +1,4 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
  *  published by the Free Software Foundation.
@@ -15,14 +12,14 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
- * Putting things on the screen/serial line using YAMONs facilities.
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *   written by Ralf Baechle
  */
 #include <linux/init.h>
-#include <linux/kernel.h>
 #include <linux/serial_reg.h>
-#include <linux/spinlock.h>
 #include <asm/io.h>
-#include <asm/system.h>
 
 static inline unsigned int serial_in(int offset)
 {
@@ -34,41 +31,10 @@ static inline void serial_out(int offset, int value)
 	outb(value, 0x3f8 + offset);
 }
 
-int putPromChar(char c)
+void __init prom_putchar(char c)
 {
 	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
 		;
 
 	serial_out(UART_TX, c);
-
-	return 1;
-}
-
-char getPromChar(void)
-{
-	while (!(serial_in(UART_LSR) & 1))
-		;
-
-	return serial_in(UART_RX);
-}
-
-void prom_printf(char *fmt, ...)
-{
-	va_list args;
-	int l;
-	char *p, *buf_end;
-	char buf[1024];
-
-	va_start(args, fmt);
-	l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */
-	va_end(args);
-
-	buf_end = buf + l;
-
-	for (p = buf; p < buf_end; p++) {
-		/* Crude cr/nl handling is better than none */
-		if (*p == '\n')
-			putPromChar('\r');
-		putPromChar(*p);
-	}
 }
diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c
index 46bc16f8b15d..e408ef0bcd6e 100644
--- a/arch/mips/mips-boards/sim/sim_mem.c
+++ b/arch/mips/mips-boards/sim/sim_mem.c
@@ -46,7 +46,7 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 	unsigned int memsize;
 
 	memsize = 0x02000000;
-	prom_printf("Setting default memory size 0x%08x\n", memsize);
+	pr_info("Setting default memory size 0x%08x\n", memsize);
 
 	memset(mdesc, 0, sizeof(mdesc));
 
diff --git a/arch/mips/mips-boards/sim/sim_platform.c b/arch/mips/mips-boards/sim/sim_platform.c
new file mode 100644
index 000000000000..53210a8c5dec
--- /dev/null
+++ b/arch/mips/mips-boards/sim/sim_platform.c
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/init.h>
+#include <linux/if_ether.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+static char mipsnet_string[] = "mipsnet";
+
+static struct platform_device eth1_device = {
+	.name		= mipsnet_string,
+	.id		= 0,
+};
+
+/*
+ * Create a platform device for the GPI port that receives the
+ * image data from the embedded camera.
+ */
+static int __init mipsnet_devinit(void)
+{
+	int err;
+
+	err = platform_device_register(&eth1_device);
+	if (err)
+		printk(KERN_ERR "%s: registration failed\n", mipsnet_string);
+
+	return err;
+}
+
+device_initcall(mipsnet_devinit);
diff --git a/arch/mips/mips-boards/sim/sim_setup.c b/arch/mips/mips-boards/sim/sim_setup.c
index ea2066c3a1f7..b705f09e57c3 100644
--- a/arch/mips/mips-boards/sim/sim_setup.c
+++ b/arch/mips/mips-boards/sim/sim_setup.c
@@ -55,7 +55,7 @@ void __init plat_mem_setup(void)
 	serial_init();
 
 	board_time_init = sim_time_init;
-	prom_printf("Linux started...\n");
+	pr_info("Linux started...\n");
 
 #ifdef CONFIG_MIPS_MT_SMP
 	sanitize_tlb_entries();
@@ -66,7 +66,7 @@ void prom_init(void)
 {
 	set_io_port_base(0xbfd00000);
 
-	prom_printf("\nLINUX started...\n");
+	pr_info("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
 }
@@ -91,7 +91,7 @@ static void __init serial_init(void)
 	s.timeout = 4;
 
 	if (early_serial_setup(&s) != 0) {
-		prom_printf(KERN_ERR "Serial setup failed!\n");
+		printk(KERN_ERR "Serial setup failed!\n");
 	}
 
 #endif
diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c
index 30711d016fed..d3a21c741514 100644
--- a/arch/mips/mips-boards/sim/sim_time.c
+++ b/arch/mips/mips-boards/sim/sim_time.c
@@ -199,7 +199,4 @@ void __init plat_timer_setup(struct irqaction *irq)
 	irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU;
 	set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
 #endif
-
-	/* to generate the first timer interrupt */
-	write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
 }
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index de5727385bc6..293697b15603 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -31,5 +31,3 @@ obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
 obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
 obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index d1af42c2a52e..59868a1edf66 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -260,7 +260,7 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma, unsigned long page,
 {
 }
 
-static void local_r3k_flush_data_cache_page(unsigned long addr)
+static void local_r3k_flush_data_cache_page(void *addr)
 {
 }
 
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index f32ebde30ccf..560a6de96556 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -128,7 +128,6 @@ static inline void tx39_flush_cache_all(void)
 		return;
 
 	tx39_blast_dcache();
-	tx39_blast_icache();
 }
 
 static inline void tx39___flush_cache_all(void)
@@ -142,24 +141,19 @@ static void tx39_flush_cache_mm(struct mm_struct *mm)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	if (cpu_context(smp_processor_id(), mm) != 0) {
-		tx39_flush_cache_all();
-	}
+	if (cpu_context(smp_processor_id(), mm) != 0)
+		tx39_blast_dcache();
 }
 
 static void tx39_flush_cache_range(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end)
 {
-	int exec;
-
+	if (!cpu_has_dc_aliases)
+		return;
 	if (!(cpu_context(smp_processor_id(), vma->vm_mm)))
 		return;
 
-	exec = vma->vm_flags & VM_EXEC;
-	if (cpu_has_dc_aliases || exec)
-		tx39_blast_dcache();
-	if (exec)
-		tx39_blast_icache();
+	tx39_blast_dcache();
 }
 
 static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page, unsigned long pfn)
@@ -218,7 +212,7 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 
 static void local_tx39_flush_data_cache_page(void * addr)
 {
-	tx39_blast_dcache_page(addr);
+	tx39_blast_dcache_page((unsigned long)addr);
 }
 
 static void tx39_flush_data_cache_page(unsigned long addr)
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 31819c58bffa..abf99b1eba13 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -3,7 +3,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1994 - 2003 by Ralf Baechle
+ * Copyright (C) 1994 - 2003, 07 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2007 MIPS Technologies, Inc.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -88,6 +89,19 @@ void __flush_dcache_page(struct page *page)
 
 EXPORT_SYMBOL(__flush_dcache_page);
 
+void __flush_anon_page(struct page *page, unsigned long vmaddr)
+{
+	if (pages_do_alias((unsigned long)page_address(page), vmaddr)) {
+		void *kaddr;
+
+		kaddr = kmap_coherent(page, vmaddr);
+		flush_data_cache_page((unsigned long)kaddr);
+		kunmap_coherent();
+	}
+}
+
+EXPORT_SYMBOL(__flush_anon_page);
+
 void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	pte_t pte)
 {
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c
index e19fbb9ee47f..4c72e650f9b6 100644
--- a/arch/mips/mm/cerr-sb1.c
+++ b/arch/mips/mm/cerr-sb1.c
@@ -77,66 +77,66 @@ static uint32_t	extract_dc(unsigned short addr, int data);
 static inline void breakout_errctl(unsigned int val)
 {
 	if (val & CP0_ERRCTL_RECOVERABLE)
-		prom_printf(" recoverable");
+		printk(" recoverable");
 	if (val & CP0_ERRCTL_DCACHE)
-		prom_printf(" dcache");
+		printk(" dcache");
 	if (val & CP0_ERRCTL_ICACHE)
-		prom_printf(" icache");
+		printk(" icache");
 	if (val & CP0_ERRCTL_MULTIBUS)
-		prom_printf(" multiple-buserr");
-	prom_printf("\n");
+		printk(" multiple-buserr");
+	printk("\n");
 }
 
 static inline void breakout_cerri(unsigned int val)
 {
 	if (val & CP0_CERRI_TAG_PARITY)
-		prom_printf(" tag-parity");
+		printk(" tag-parity");
 	if (val & CP0_CERRI_DATA_PARITY)
-		prom_printf(" data-parity");
+		printk(" data-parity");
 	if (val & CP0_CERRI_EXTERNAL)
-		prom_printf(" external");
-	prom_printf("\n");
+		printk(" external");
+	printk("\n");
 }
 
 static inline void breakout_cerrd(unsigned int val)
 {
 	switch (val & CP0_CERRD_CAUSES) {
 	case CP0_CERRD_LOAD:
-		prom_printf(" load,");
+		printk(" load,");
 		break;
 	case CP0_CERRD_STORE:
-		prom_printf(" store,");
+		printk(" store,");
 		break;
 	case CP0_CERRD_FILLWB:
-		prom_printf(" fill/wb,");
+		printk(" fill/wb,");
 		break;
 	case CP0_CERRD_COHERENCY:
-		prom_printf(" coherency,");
+		printk(" coherency,");
 		break;
 	case CP0_CERRD_DUPTAG:
-		prom_printf(" duptags,");
+		printk(" duptags,");
 		break;
 	default:
-		prom_printf(" NO CAUSE,");
+		printk(" NO CAUSE,");
 		break;
 	}
 	if (!(val & CP0_CERRD_TYPES))
-		prom_printf(" NO TYPE");
+		printk(" NO TYPE");
 	else {
 		if (val & CP0_CERRD_MULTIPLE)
-			prom_printf(" multi-err");
+			printk(" multi-err");
 		if (val & CP0_CERRD_TAG_STATE)
-			prom_printf(" tag-state");
+			printk(" tag-state");
 		if (val & CP0_CERRD_TAG_ADDRESS)
-			prom_printf(" tag-address");
+			printk(" tag-address");
 		if (val & CP0_CERRD_DATA_SBE)
-			prom_printf(" data-SBE");
+			printk(" data-SBE");
 		if (val & CP0_CERRD_DATA_DBE)
-			prom_printf(" data-DBE");
+			printk(" data-DBE");
 		if (val & CP0_CERRD_EXTERNAL)
-			prom_printf(" external");
+			printk(" external");
 	}
-	prom_printf("\n");
+	printk("\n");
 }
 
 #ifndef CONFIG_SIBYTE_BUS_WATCHER
@@ -157,18 +157,18 @@ static void check_bus_watcher(void)
 		l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
 #endif
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
-		prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
-		prom_printf("\nLast recorded signature:\n");
-		prom_printf("Request %02x from %d, answered by %d with Dcode %d\n",
+		printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
+		printk("\nLast recorded signature:\n");
+		printk("Request %02x from %d, answered by %d with Dcode %d\n",
 		       (unsigned int)(G_SCD_BERR_TID(status) & 0x3f),
 		       (int)(G_SCD_BERR_TID(status) >> 6),
 		       (int)G_SCD_BERR_RID(status),
 		       (int)G_SCD_BERR_DCODE(status));
 #ifdef DUMP_L2_ECC_TAG_ON_ERROR
-		prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+		printk("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
 #endif
 	} else {
-		prom_printf("Bus watcher indicates no error\n");
+		printk("Bus watcher indicates no error\n");
 	}
 }
 #else
@@ -177,8 +177,8 @@ extern void check_bus_watcher(void);
 
 asmlinkage void sb1_cache_error(void)
 {
-	uint64_t cerr_dpa;
 	uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
+	unsigned long long cerr_dpa;
 
 #ifdef CONFIG_SIBYTE_BW_TRACE
 	/* Freeze the trace buffer now */
@@ -187,11 +187,11 @@ asmlinkage void sb1_cache_error(void)
 #else
 	csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
 #endif
-	prom_printf("Trace buffer frozen\n");
+	printk("Trace buffer frozen\n");
 #endif
 
-	prom_printf("Cache error exception on CPU %x:\n",
-		    (read_c0_prid() >> 25) & 0x7);
+	printk("Cache error exception on CPU %x:\n",
+	       (read_c0_prid() >> 25) & 0x7);
 
 	__asm__ __volatile__ (
 	"	.set	push\n\t"
@@ -209,43 +209,43 @@ asmlinkage void sb1_cache_error(void)
 	  "=r" (dpahi), "=r" (dpalo), "=r" (eepc));
 
 	cerr_dpa = (((uint64_t)dpahi) << 32) | dpalo;
-	prom_printf(" c0_errorepc ==   %08x\n", eepc);
-	prom_printf(" c0_errctl   ==   %08x", errctl);
+	printk(" c0_errorepc ==   %08x\n", eepc);
+	printk(" c0_errctl   ==   %08x", errctl);
 	breakout_errctl(errctl);
 	if (errctl & CP0_ERRCTL_ICACHE) {
-		prom_printf(" c0_cerr_i   ==   %08x", cerr_i);
+		printk(" c0_cerr_i   ==   %08x", cerr_i);
 		breakout_cerri(cerr_i);
 		if (CP0_CERRI_IDX_VALID(cerr_i)) {
 			/* Check index of EPC, allowing for delay slot */
 			if (((eepc & SB1_CACHE_INDEX_MASK) != (cerr_i & SB1_CACHE_INDEX_MASK)) &&
 			    ((eepc & SB1_CACHE_INDEX_MASK) != ((cerr_i & SB1_CACHE_INDEX_MASK) - 4)))
-				prom_printf(" cerr_i idx doesn't match eepc\n");
+				printk(" cerr_i idx doesn't match eepc\n");
 			else {
 				res = extract_ic(cerr_i & SB1_CACHE_INDEX_MASK,
 						 (cerr_i & CP0_CERRI_DATA) != 0);
 				if (!(res & cerr_i))
-					prom_printf("...didn't see indicated icache problem\n");
+					printk("...didn't see indicated icache problem\n");
 			}
 		}
 	}
 	if (errctl & CP0_ERRCTL_DCACHE) {
-		prom_printf(" c0_cerr_d   ==   %08x", cerr_d);
+		printk(" c0_cerr_d   ==   %08x", cerr_d);
 		breakout_cerrd(cerr_d);
 		if (CP0_CERRD_DPA_VALID(cerr_d)) {
-			prom_printf(" c0_cerr_dpa == %010llx\n", cerr_dpa);
+			printk(" c0_cerr_dpa == %010llx\n", cerr_dpa);
 			if (!CP0_CERRD_IDX_VALID(cerr_d)) {
 				res = extract_dc(cerr_dpa & SB1_CACHE_INDEX_MASK,
 						 (cerr_d & CP0_CERRD_DATA) != 0);
 				if (!(res & cerr_d))
-					prom_printf("...didn't see indicated dcache problem\n");
+					printk("...didn't see indicated dcache problem\n");
 			} else {
 				if ((cerr_dpa & SB1_CACHE_INDEX_MASK) != (cerr_d & SB1_CACHE_INDEX_MASK))
-					prom_printf(" cerr_d idx doesn't match cerr_dpa\n");
+					printk(" cerr_d idx doesn't match cerr_dpa\n");
 				else {
 					res = extract_dc(cerr_d & SB1_CACHE_INDEX_MASK,
 							 (cerr_d & CP0_CERRD_DATA) != 0);
 					if (!(res & cerr_d))
-						prom_printf("...didn't see indicated problem\n");
+						printk("...didn't see indicated problem\n");
 				}
 			}
 		}
@@ -329,12 +329,13 @@ static uint32_t extract_ic(unsigned short addr, int data)
 {
 	unsigned short way;
 	int valid;
-	uint64_t taglo, va, tlo_tmp;
 	uint32_t taghi, taglolo, taglohi;
+	unsigned long long taglo, va;
+	uint64_t tlo_tmp;
 	uint8_t lru;
 	int res = 0;
 
-	prom_printf("Icache index 0x%04x  ", addr);
+	printk("Icache index 0x%04x  ", addr);
 	for (way = 0; way < 4; way++) {
 		/* Index-load-tag-I */
 		__asm__ __volatile__ (
@@ -354,7 +355,7 @@ static uint32_t extract_ic(unsigned short addr, int data)
 		taglo = ((unsigned long long)taglohi << 32) | taglolo;
 		if (way == 0) {
 			lru = (taghi >> 14) & 0xff;
-			prom_printf("[Bank %d Set 0x%02x]  LRU > %d %d %d %d > MRU\n",
+			printk("[Bank %d Set 0x%02x]  LRU > %d %d %d %d > MRU\n",
 				    ((addr >> 5) & 0x3), /* bank */
 				    ((addr >> 7) & 0x3f), /* index */
 				    (lru & 0x3),
@@ -369,19 +370,19 @@ static uint32_t extract_ic(unsigned short addr, int data)
 		if (valid) {
 			tlo_tmp = taglo & 0xfff3ff;
 			if (((taglo >> 10) & 1) ^ range_parity(tlo_tmp, 23, 0)) {
-				prom_printf("   ** bad parity in VTag0/G/ASID\n");
+				printk("   ** bad parity in VTag0/G/ASID\n");
 				res |= CP0_CERRI_TAG_PARITY;
 			}
 			if (((taglo >> 11) & 1) ^ range_parity(taglo, 63, 24)) {
-				prom_printf("   ** bad parity in R/VTag1\n");
+				printk("   ** bad parity in R/VTag1\n");
 				res |= CP0_CERRI_TAG_PARITY;
 			}
 		}
 		if (valid ^ ((taghi >> 27) & 1)) {
-			prom_printf("   ** bad parity for valid bit\n");
+			printk("   ** bad parity for valid bit\n");
 			res |= CP0_CERRI_TAG_PARITY;
 		}
-		prom_printf(" %d  [VA %016llx]  [Vld? %d]  raw tags: %08X-%016llX\n",
+		printk(" %d  [VA %016llx]  [Vld? %d]  raw tags: %08X-%016llX\n",
 			    way, va, valid, taghi, taglo);
 
 		if (data) {
@@ -407,21 +408,21 @@ static uint32_t extract_ic(unsigned short addr, int data)
 				: "r" ((way << 13) | addr | (offset << 3)));
 				predecode = (datahi >> 8) & 0xff;
 				if (((datahi >> 16) & 1) != (uint32_t)range_parity(predecode, 7, 0)) {
-					prom_printf("   ** bad parity in predecode\n");
+					printk("   ** bad parity in predecode\n");
 					res |= CP0_CERRI_DATA_PARITY;
 				}
 				/* XXXKW should/could check predecode bits themselves */
 				if (((datahi >> 4) & 0xf) ^ inst_parity(insta)) {
-					prom_printf("   ** bad parity in instruction a\n");
+					printk("   ** bad parity in instruction a\n");
 					res |= CP0_CERRI_DATA_PARITY;
 				}
 				if ((datahi & 0xf) ^ inst_parity(instb)) {
-					prom_printf("   ** bad parity in instruction b\n");
+					printk("   ** bad parity in instruction b\n");
 					res |= CP0_CERRI_DATA_PARITY;
 				}
-				prom_printf("  %05X-%08X%08X", datahi, insta, instb);
+				printk("  %05X-%08X%08X", datahi, insta, instb);
 			}
-			prom_printf("\n");
+			printk("\n");
 		}
 	}
 	return res;
@@ -484,12 +485,12 @@ static uint32_t extract_dc(unsigned short addr, int data)
 {
 	int valid, way;
 	unsigned char state;
-	uint64_t taglo, pa;
 	uint32_t taghi, taglolo, taglohi;
+	unsigned long long taglo, pa;
 	uint8_t ecc, lru;
 	int res = 0;
 
-	prom_printf("Dcache index 0x%04x  ", addr);
+	printk("Dcache index 0x%04x  ", addr);
 	for (way = 0; way < 4; way++) {
 		__asm__ __volatile__ (
 		"	.set	push\n\t"
@@ -509,7 +510,7 @@ static uint32_t extract_dc(unsigned short addr, int data)
 		pa = (taglo & 0xFFFFFFE000ULL) | addr;
 		if (way == 0) {
 			lru = (taghi >> 14) & 0xff;
-			prom_printf("[Bank %d Set 0x%02x]  LRU > %d %d %d %d > MRU\n",
+			printk("[Bank %d Set 0x%02x]  LRU > %d %d %d %d > MRU\n",
 				    ((addr >> 11) & 0x2) | ((addr >> 5) & 1), /* bank */
 				    ((addr >> 6) & 0x3f), /* index */
 				    (lru & 0x3),
@@ -519,15 +520,15 @@ static uint32_t extract_dc(unsigned short addr, int data)
 		}
 		state = (taghi >> 25) & 0x1f;
 		valid = DC_TAG_VALID(state);
-		prom_printf(" %d  [PA %010llx]  [state %s (%02x)]  raw tags: %08X-%016llX\n",
+		printk(" %d  [PA %010llx]  [state %s (%02x)]  raw tags: %08X-%016llX\n",
 			    way, pa, dc_state_str(state), state, taghi, taglo);
 		if (valid) {
 			if (((taglo >> 11) & 1) ^ range_parity(taglo, 39, 26)) {
-				prom_printf("   ** bad parity in PTag1\n");
+				printk("   ** bad parity in PTag1\n");
 				res |= CP0_CERRD_TAG_ADDRESS;
 			}
 			if (((taglo >> 10) & 1) ^ range_parity(taglo, 25, 13)) {
-				prom_printf("   ** bad parity in PTag0\n");
+				printk("   ** bad parity in PTag0\n");
 				res |= CP0_CERRD_TAG_ADDRESS;
 			}
 		} else {
@@ -535,8 +536,8 @@ static uint32_t extract_dc(unsigned short addr, int data)
 		}
 
 		if (data) {
-			uint64_t datalo;
 			uint32_t datalohi, datalolo, datahi;
+			unsigned long long datalo;
 			int offset;
 			char bad_ecc = 0;
 
@@ -567,13 +568,13 @@ static uint32_t extract_dc(unsigned short addr, int data)
 					}
 					res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE;
 				}
-				prom_printf("  %02X-%016llX", datahi, datalo);
+				printk("  %02X-%016llX", datahi, datalo);
 			}
-			prom_printf("\n");
+			printk("\n");
 			if (bad_ecc)
-				prom_printf("  dwords w/ bad ECC: %d %d %d %d\n",
-					    !!(bad_ecc & 8), !!(bad_ecc & 4),
-					    !!(bad_ecc & 2), !!(bad_ecc & 1));
+				printk("  dwords w/ bad ECC: %d %d %d %d\n",
+				       !!(bad_ecc & 8), !!(bad_ecc & 4),
+				       !!(bad_ecc & 2), !!(bad_ecc & 1));
 		}
 	}
 	return res;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 4a32e939698f..f0eb29917d9a 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -19,6 +19,13 @@
 
 #include <dma-coherence.h>
 
+static inline unsigned long dma_addr_to_virt(dma_addr_t dma_addr)
+{
+	unsigned long addr = plat_dma_addr_to_phys(dma_addr);
+
+	return (unsigned long)phys_to_virt(addr);
+}
+
 /*
  * Warning on the terminology - Linux calls an uncached area coherent;
  * MIPS terminology calls memory areas with hardware maintained coherency
@@ -140,7 +147,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	enum dma_data_direction direction)
 {
 	if (cpu_is_noncoherent_r10000(dev))
-		__dma_sync(plat_dma_addr_to_phys(dma_addr) + PAGE_OFFSET, size,
+		__dma_sync(dma_addr_to_virt(dma_addr), size,
 		           direction);
 
 	plat_unmap_dma_mem(dma_addr);
@@ -234,7 +241,7 @@ void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
 	if (cpu_is_noncoherent_r10000(dev)) {
 		unsigned long addr;
 
-		addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+		addr = dma_addr_to_virt(dma_handle);
 		__dma_sync(addr, size, direction);
 	}
 }
@@ -246,10 +253,10 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
 {
 	BUG_ON(direction == DMA_NONE);
 
-	if (cpu_is_noncoherent_r10000(dev)) {
+	if (!plat_device_is_coherent(dev)) {
 		unsigned long addr;
 
-		addr = plat_dma_addr_to_phys(dma_handle);
+		addr = dma_addr_to_virt(dma_handle);
 		__dma_sync(addr, size, direction);
 	}
 }
@@ -264,7 +271,7 @@ void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
 	if (cpu_is_noncoherent_r10000(dev)) {
 		unsigned long addr;
 
-		addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+		addr = dma_addr_to_virt(dma_handle);
 		__dma_sync(addr + offset, size, direction);
 	}
 }
@@ -276,10 +283,10 @@ void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
 {
 	BUG_ON(direction == DMA_NONE);
 
-	if (cpu_is_noncoherent_r10000(dev)) {
+	if (!plat_device_is_coherent(dev)) {
 		unsigned long addr;
 
-		addr = PAGE_OFFSET + plat_dma_addr_to_phys(dma_handle);
+		addr = dma_addr_to_virt(dma_handle);
 		__dma_sync(addr + offset, size, direction);
 	}
 }
@@ -295,7 +302,7 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 
 	/* Make sure that gcc doesn't leave the empty loop body.  */
 	for (i = 0; i < nelems; i++, sg++) {
-		if (!plat_device_is_coherent(dev))
+		if (cpu_is_noncoherent_r10000(dev))
 			__dma_sync((unsigned long)page_address(sg->page),
 			           sg->length, direction);
 		plat_unmap_dma_mem(sg->dma_address);
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 6f90e7ef66ac..f9c595dceba9 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -42,7 +42,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	siginfo_t info;
 
 #if 0
-	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", smp_processor_id(),
+	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
 	       current->comm, current->pid, field, address, write,
 	       field, regs->cp0_epc);
 #endif
@@ -165,7 +165,7 @@ no_context:
 
 	printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
 	       "virtual address %0*lx, epc == %0*lx, ra == %0*lx\n",
-	       smp_processor_id(), field, address, field, regs->cp0_epc,
+	       raw_smp_processor_id(), field, address, field, regs->cp0_epc,
 	       field,  regs->regs[31]);
 	die("Oops", regs);
 
@@ -228,7 +228,7 @@ vmalloc_fault:
 		pmd_t *pmd, *pmd_k;
 		pte_t *pte_k;
 
-		pgd = (pgd_t *) pgd_current[smp_processor_id()] + offset;
+		pgd = (pgd_t *) pgd_current[raw_smp_processor_id()] + offset;
 		pgd_k = init_mm.pgd + offset;
 
 		if (!pgd_present(*pgd_k))
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 125a4a85ec05..2d1c2c024822 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -61,8 +61,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long highstart_pfn, highend_pfn;
-
 /*
  * We have up to 8 empty zeroed pages so we can map one of the right colour
  * when needed.  This is necessary only on R4000 / R4400 SC and MC versions
@@ -125,7 +123,7 @@ static void __init kmap_coherent_init(void)
 static inline void kmap_coherent_init(void) {}
 #endif
 
-static inline void *kmap_coherent(struct page *page, unsigned long addr)
+void *kmap_coherent(struct page *page, unsigned long addr)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr, flags, entrylo;
@@ -179,7 +177,7 @@ static inline void *kmap_coherent(struct page *page, unsigned long addr)
 
 #define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1)))
 
-static inline void kunmap_coherent(struct page *page)
+void kunmap_coherent(void)
 {
 #ifndef CONFIG_MIPS_MT_SMTC
 	unsigned int wired;
@@ -212,7 +210,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	if (cpu_has_dc_aliases) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
-		kunmap_coherent(from);
+		kunmap_coherent();
 	} else {
 		vfrom = kmap_atomic(from, KM_USER0);
 		copy_page(vto, vfrom);
@@ -235,7 +233,7 @@ void copy_to_user_page(struct vm_area_struct *vma,
 	if (cpu_has_dc_aliases) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
-		kunmap_coherent(page);
+		kunmap_coherent();
 	} else
 		memcpy(dst, src, len);
 	if ((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc)
@@ -252,7 +250,7 @@ void copy_from_user_page(struct vm_area_struct *vma,
 		void *vfrom =
 			kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
-		kunmap_coherent(page);
+		kunmap_coherent();
 	} else
 		memcpy(dst, src, len);
 }
@@ -261,6 +259,8 @@ EXPORT_SYMBOL(copy_from_user_page);
 
 
 #ifdef CONFIG_HIGHMEM
+unsigned long highstart_pfn, highend_pfn;
+
 pte_t *kmap_pte;
 pgprot_t kmap_prot;
 
@@ -314,8 +314,6 @@ void __init fixrange_init(unsigned long start, unsigned long end,
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-extern void pagetable_init(void);
-
 static int __init page_is_ram(unsigned long pagenr)
 {
 	int i;
@@ -353,18 +351,15 @@ void __init paging_init(void)
 #endif
 	kmap_coherent_init();
 
-#ifdef CONFIG_ISA
-	if (max_low_pfn >= MAX_DMA_PFN)
-		if (min_low_pfn >= MAX_DMA_PFN) {
-			zones_size[ZONE_DMA] = 0;
-			zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
-		} else {
-			zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
-			zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
-		}
+#ifdef CONFIG_ZONE_DMA
+	if (min_low_pfn < MAX_DMA_PFN && MAX_DMA_PFN <= max_low_pfn) {
+		zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
+		zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
+	} else if (max_low_pfn < MAX_DMA_PFN)
+		zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
 	else
 #endif
-	zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
+	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
 
 #ifdef CONFIG_HIGHMEM
 	zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
@@ -379,7 +374,7 @@ void __init paging_init(void)
 #ifdef CONFIG_FLATMEM
 	free_area_init(zones_size);
 #else
-	pfn = 0;
+	pfn = min_low_pfn;
 	for (i = 0; i < MAX_NR_ZONES; i++)
 		for (j = 0; j < zones_size[i]; j++, pfn++)
 			if (!page_is_ram(pfn))
diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c
index fc2c96f0a1fd..cea7d0ea36e4 100644
--- a/arch/mips/mm/ioremap.c
+++ b/arch/mips/mm/ioremap.c
@@ -6,13 +6,98 @@
  * (C) Copyright 1995 1996 Linus Torvalds
  * (C) Copyright 2001, 2002 Ralf Baechle
  */
-#include <linux/mm.h>
 #include <linux/module.h>
 #include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
 #include <linux/vmalloc.h>
-#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/tlbflush.h>
+
+static inline void remap_area_pte(pte_t * pte, unsigned long address,
+	phys_t size, phys_t phys_addr, unsigned long flags)
+{
+	phys_t end;
+	unsigned long pfn;
+	pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
+	                           | __WRITEABLE | flags);
+
+	address &= ~PMD_MASK;
+	end = address + size;
+	if (end > PMD_SIZE)
+		end = PMD_SIZE;
+	if (address >= end)
+		BUG();
+	pfn = phys_addr >> PAGE_SHIFT;
+	do {
+		if (!pte_none(*pte)) {
+			printk("remap_area_pte: page already exists\n");
+			BUG();
+		}
+		set_pte(pte, pfn_pte(pfn, pgprot));
+		address += PAGE_SIZE;
+		pfn++;
+		pte++;
+	} while (address && (address < end));
+}
+
+static inline int remap_area_pmd(pmd_t * pmd, unsigned long address,
+	phys_t size, phys_t phys_addr, unsigned long flags)
+{
+	phys_t end;
+
+	address &= ~PGDIR_MASK;
+	end = address + size;
+	if (end > PGDIR_SIZE)
+		end = PGDIR_SIZE;
+	phys_addr -= address;
+	if (address >= end)
+		BUG();
+	do {
+		pte_t * pte = pte_alloc_kernel(pmd, address);
+		if (!pte)
+			return -ENOMEM;
+		remap_area_pte(pte, address, end - address, address + phys_addr, flags);
+		address = (address + PMD_SIZE) & PMD_MASK;
+		pmd++;
+	} while (address && (address < end));
+	return 0;
+}
+
+static int remap_area_pages(unsigned long address, phys_t phys_addr,
+	phys_t size, unsigned long flags)
+{
+	int error;
+	pgd_t * dir;
+	unsigned long end = address + size;
+
+	phys_addr -= address;
+	dir = pgd_offset(&init_mm, address);
+	flush_cache_all();
+	if (address >= end)
+		BUG();
+	do {
+		pud_t *pud;
+		pmd_t *pmd;
+
+		error = -ENOMEM;
+		pud = pud_alloc(&init_mm, dir, address);
+		if (!pud)
+			break;
+		pmd = pmd_alloc(&init_mm, pud, address);
+		if (!pmd)
+			break;
+		if (remap_area_pmd(pmd, address, end - address,
+					 phys_addr + address, flags))
+			break;
+		error = 0;
+		address = (address + PGDIR_SIZE) & PGDIR_MASK;
+		dir++;
+	} while (address && (address < end));
+	flush_tlb_all();
+	return error;
+}
 
 /*
  * Generic mapping function (not visible outside):
@@ -36,7 +121,6 @@ void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 	unsigned long offset;
 	phys_t last_addr;
 	void * addr;
-	pgprot_t pgprot;
 
 	phys_addr = fixup_bigphys_addr(phys_addr, size);
 
@@ -68,9 +152,6 @@ void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 				return NULL;
 	}
 
-	pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | __READABLE
-			  | __WRITEABLE | flags);
-
 	/*
 	 * Mappings have to be page-aligned
 	 */
@@ -85,8 +166,7 @@ void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags)
 	if (!area)
 		return NULL;
 	addr = area->addr;
-	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
-			       phys_addr, pgprot)) {
+	if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
 		vunmap(addr);
 		return NULL;
 	}
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index fc3c7878fb45..adb37d0a30ea 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -218,8 +218,7 @@ void sb1_dma_init(void)
 	for (i = 0; i < DM_NUM_CHANNELS; i++) {
 		const u64 base_val = CPHYSADDR(&page_descr[i]) |
 				     V_DM_DSCR_BASE_RINGSZ(1);
-		volatile void *base_reg =
-			IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+		void *base_reg = IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
 
 		__raw_writeq(base_val, base_reg);
 		__raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c
index 4a61e624b0ec..575e4019227b 100644
--- a/arch/mips/mm/pgtable-32.c
+++ b/arch/mips/mm/pgtable-32.c
@@ -11,6 +11,7 @@
 #include <linux/highmem.h>
 #include <asm/fixmap.h>
 #include <asm/pgtable.h>
+#include <asm/pgalloc.h>
 
 void pgd_init(unsigned long page)
 {
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index c46eb651bf09..e4b565aeb008 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -10,6 +10,7 @@
 #include <linux/mm.h>
 #include <asm/fixmap.h>
 #include <asm/pgtable.h>
+#include <asm/pgalloc.h>
 
 void pgd_init(unsigned long page)
 {
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
index 2292d0ec47fc..2c30b4f56245 100644
--- a/arch/mips/momentum/jaguar_atx/ja-console.c
+++ b/arch/mips/momentum/jaguar_atx/ja-console.c
@@ -74,11 +74,6 @@ void prom_putchar(char c)
 	uart->iu_thr = c;
 }
 
-char __init prom_getchar(void)
-{
-	return 0;
-}
-
 static void inline ja_console_probe(void)
 {
 	struct uart_port up;
diff --git a/arch/mips/momentum/jaguar_atx/platform.c b/arch/mips/momentum/jaguar_atx/platform.c
index 81037709ba0d..561844878a90 100644
--- a/arch/mips/momentum/jaguar_atx/platform.c
+++ b/arch/mips/momentum/jaguar_atx/platform.c
@@ -38,8 +38,6 @@ static struct platform_device mv643xx_eth_shared_device = {
 #define MV64x60_IRQ_ETH_1 49
 #define MV64x60_IRQ_ETH_2 50
 
-#ifdef CONFIG_MV643XX_ETH_0
-
 static struct resource mv64x60_eth0_resources[] = {
 	[0] = {
 		.name	= "eth0 irq",
@@ -49,10 +47,8 @@ static struct resource mv64x60_eth0_resources[] = {
 	},
 };
 
-static char eth0_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth0_pd = {
-	.mac_addr	= eth0_mac_addr,
+	.port_number	= 0,
 
 	.tx_sram_addr	= MV_SRAM_BASE_ETH0,
 	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
@@ -72,9 +68,6 @@ static struct platform_device eth0_device = {
 		.platform_data = &eth0_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
 
 static struct resource mv64x60_eth1_resources[] = {
 	[0] = {
@@ -85,10 +78,8 @@ static struct resource mv64x60_eth1_resources[] = {
 	},
 };
 
-static char eth1_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth1_pd = {
-	.mac_addr	= eth1_mac_addr,
+	.port_number	= 1,
 
 	.tx_sram_addr	= MV_SRAM_BASE_ETH1,
 	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
@@ -108,9 +99,6 @@ static struct platform_device eth1_device = {
 		.platform_data = &eth1_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-#ifdef CONFIG_MV643XX_ETH_2
 
 static struct resource mv64x60_eth2_resources[] = {
 	[0] = {
@@ -121,10 +109,8 @@ static struct resource mv64x60_eth2_resources[] = {
 	},
 };
 
-static char eth2_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth2_pd = {
-	.mac_addr	= eth2_mac_addr,
+	.port_number	= 2,
 };
 
 static struct platform_device eth2_device = {
@@ -136,19 +122,12 @@ static struct platform_device eth2_device = {
 		.platform_data = &eth2_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_2 */
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
 	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
 	&eth2_device,
-#endif
 };
 
 static u8 __init exchange_bit(u8 val, u8 cs)
@@ -215,15 +194,9 @@ static int __init mv643xx_eth_add_pds(void)
 	int ret;
 
 	get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
-	eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
-	eth_mac_add(eth2_mac_addr, mac, 2);
-#endif
+	eth_mac_add(eth0_pd.mac_addr, mac, 0);
+	eth_mac_add(eth1_pd.mac_addr, mac, 1);
+	eth_mac_add(eth2_pd.mac_addr, mac, 2);
 	ret = platform_add_devices(mv643xx_eth_pd_devs,
 			ARRAY_SIZE(mv643xx_eth_pd_devs));
 
diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c
index 57cfe5c6e4a8..44e4c3fc7403 100644
--- a/arch/mips/momentum/ocelot_3/platform.c
+++ b/arch/mips/momentum/ocelot_3/platform.c
@@ -38,8 +38,6 @@ static struct platform_device mv643xx_eth_shared_device = {
 #define MV64x60_IRQ_ETH_1 49
 #define MV64x60_IRQ_ETH_2 50
 
-#ifdef CONFIG_MV643XX_ETH_0
-
 static struct resource mv64x60_eth0_resources[] = {
 	[0] = {
 		.name	= "eth0 irq",
@@ -49,10 +47,8 @@ static struct resource mv64x60_eth0_resources[] = {
 	},
 };
 
-static char eth0_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth0_pd = {
-	.mac_addr	= eth0_mac_addr,
+	.port_number	= 0,
 
 	.tx_sram_addr	= MV_SRAM_BASE_ETH0,
 	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
@@ -72,9 +68,6 @@ static struct platform_device eth0_device = {
 		.platform_data = &eth0_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
 
 static struct resource mv64x60_eth1_resources[] = {
 	[0] = {
@@ -85,10 +78,8 @@ static struct resource mv64x60_eth1_resources[] = {
 	},
 };
 
-static char eth1_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth1_pd = {
-	.mac_addr	= eth1_mac_addr,
+	.port_number	= 1,
 
 	.tx_sram_addr	= MV_SRAM_BASE_ETH1,
 	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
@@ -108,9 +99,6 @@ static struct platform_device eth1_device = {
 		.platform_data = &eth1_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-#ifdef CONFIG_MV643XX_ETH_2
 
 static struct resource mv64x60_eth2_resources[] = {
 	[0] = {
@@ -121,10 +109,8 @@ static struct resource mv64x60_eth2_resources[] = {
 	},
 };
 
-static char eth2_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth2_pd = {
-	.mac_addr	= eth2_mac_addr,
+	.port_number	= 2,
 };
 
 static struct platform_device eth2_device = {
@@ -136,19 +122,12 @@ static struct platform_device eth2_device = {
 		.platform_data = &eth2_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_2 */
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
 	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
 	&eth2_device,
-#endif
 };
 
 static u8 __init exchange_bit(u8 val, u8 cs)
@@ -215,15 +194,9 @@ static int __init mv643xx_eth_add_pds(void)
 	int ret;
 
 	get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
-	eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
-	eth_mac_add(eth2_mac_addr, mac, 2);
-#endif
+	eth_mac_add(eth0_pd.mac_addr, mac, 0);
+	eth_mac_add(eth1_pd.mac_addr, mac, 1);
+	eth_mac_add(eth2_pd.mac_addr, mac, 2);
 	ret = platform_add_devices(mv643xx_eth_pd_devs,
 			ARRAY_SIZE(mv643xx_eth_pd_devs));
 
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c
index 40472f7944d7..844d566c9de3 100644
--- a/arch/mips/momentum/ocelot_c/irq.c
+++ b/arch/mips/momentum/ocelot_c/irq.c
@@ -64,7 +64,7 @@ extern void ll_cpci_irq(void);
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_cause() & read_c0_status();
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
 
 	if (pending & STATUSF_IP0)
 		do_IRQ(0);
diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c
index 6c495b2f1560..7780aa0c6555 100644
--- a/arch/mips/momentum/ocelot_c/platform.c
+++ b/arch/mips/momentum/ocelot_c/platform.c
@@ -37,8 +37,6 @@ static struct platform_device mv643xx_eth_shared_device = {
 #define MV64x60_IRQ_ETH_0 48
 #define MV64x60_IRQ_ETH_1 49
 
-#ifdef CONFIG_MV643XX_ETH_0
-
 static struct resource mv64x60_eth0_resources[] = {
 	[0] = {
 		.name	= "eth0 irq",
@@ -48,10 +46,8 @@ static struct resource mv64x60_eth0_resources[] = {
 	},
 };
 
-static char eth0_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth0_pd = {
-	.mac_addr	= eth0_mac_addr,
+	.port_number	= 0,
 
 	.tx_sram_addr	= MV_SRAM_BASE_ETH0,
 	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
@@ -71,9 +67,6 @@ static struct platform_device eth0_device = {
 		.platform_data = &eth0_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
 
 static struct resource mv64x60_eth1_resources[] = {
 	[0] = {
@@ -84,10 +77,8 @@ static struct resource mv64x60_eth1_resources[] = {
 	},
 };
 
-static char eth1_mac_addr[ETH_ALEN];
-
 static struct mv643xx_eth_platform_data eth1_pd = {
-	.mac_addr	= eth1_mac_addr,
+	.port_number	= 1,
 
 	.tx_sram_addr	= MV_SRAM_BASE_ETH1,
 	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
@@ -107,16 +98,11 @@ static struct platform_device eth1_device = {
 		.platform_data = &eth1_pd,
 	},
 };
-#endif /* CONFIG_MV643XX_ETH_1 */
 
 static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
 	&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
 	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
 	&eth1_device,
-#endif
 	/* The third port is not wired up on the Ocelot C */
 };
 
@@ -184,12 +170,8 @@ static int __init mv643xx_eth_add_pds(void)
 	int ret;
 
 	get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
-	eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
+	eth_mac_add(eth0_pd.mac_addr, mac, 0);
+	eth_mac_add(eth1_pd.mac_addr, mac, 1);
 	ret = platform_add_devices(mv643xx_eth_pd_devs,
 			ARRAY_SIZE(mv643xx_eth_pd_devs));
 
diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile
index adb5665d40a9..c0a0030d949d 100644
--- a/arch/mips/momentum/ocelot_g/Makefile
+++ b/arch/mips/momentum/ocelot_g/Makefile
@@ -4,5 +4,3 @@
 
 obj-y	 		+= irq.o gt-irq.o prom.o reset.o setup.o
 obj-$(CONFIG_KGDB)	+= dbg_io.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/oprofile/Kconfig b/arch/mips/oprofile/Kconfig
index ca395ef06d4e..fb6f235348b0 100644
--- a/arch/mips/oprofile/Kconfig
+++ b/arch/mips/oprofile/Kconfig
@@ -11,7 +11,7 @@ config PROFILING
 
 config OPROFILE
 	tristate "OProfile system profiling (EXPERIMENTAL)"
-	depends on PROFILING && !!MIPS_MT_SMTC && EXPERIMENTAL
+	depends on PROFILING && !MIPS_MT_SMTC && EXPERIMENTAL
 	help
 	  OProfile is a profiling system capable of profiling the
 	  whole system, include the kernel, kernel modules, libraries,
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 455d76ad06d8..4f94fa261aae 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -35,7 +35,7 @@
 #define vpe_id()	smp_processor_id()
 #else
 #define WHAT		0
-#define vpe_id()	smp_processor_id()
+#define vpe_id()	0
 #endif
 
 #define __define_perf_accessors(r, n, np)				\
@@ -74,13 +74,13 @@ static inline void w_c0_ ## r ## n(unsigned int value)			\
 
 __define_perf_accessors(perfcntr, 0, 2)
 __define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 2)
-__define_perf_accessors(perfcntr, 3, 2)
+__define_perf_accessors(perfcntr, 2, 0)
+__define_perf_accessors(perfcntr, 3, 1)
 
 __define_perf_accessors(perfctrl, 0, 2)
 __define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 2)
-__define_perf_accessors(perfctrl, 3, 2)
+__define_perf_accessors(perfctrl, 2, 0)
+__define_perf_accessors(perfctrl, 3, 1)
 
 struct op_mips_model op_model_mipsxx_ops;
 
@@ -97,7 +97,6 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
 	int i;
 
 	/* Compute the performance counter control word.  */
-	/* For now count kernel and user mode */
 	for (i = 0; i < counters; i++) {
 		reg.control[i] = 0;
 		reg.counter[i] = 0;
@@ -223,18 +222,17 @@ static inline int n_counters(void)
 	switch (current_cpu_data.cputype) {
 	case CPU_R10000:
 		counters = 2;
+		break;
 
 	case CPU_R12000:
 	case CPU_R14000:
 		counters = 4;
+		break;
 
 	default:
 		counters = __n_counters();
 	}
 
-#ifdef CONFIG_MIPS_MT_SMP
-	counters >> 1;
-#endif
 	return counters;
 }
 
@@ -268,6 +266,10 @@ static int __init mipsxx_init(void)
 
 	reset_counters(counters);
 
+#ifdef CONFIG_MIPS_MT_SMP
+	counters >>= 1;
+#endif
+
 	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_data.cputype) {
 	case CPU_20KC:
@@ -324,7 +326,11 @@ static int __init mipsxx_init(void)
 
 static void mipsxx_exit(void)
 {
-	reset_counters(op_model_mipsxx_ops.num_counters);
+	int counters = op_model_mipsxx_ops.num_counters;
+#ifdef CONFIG_MIPS_MT_SMP
+	counters <<= 1;
+#endif
+	reset_counters(counters);
 
 	perf_irq = null_perf_irq;
 }
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index bf85995ca042..df487c063b1d 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -8,8 +8,7 @@ obj-y				+= pci.o pci-dac.o
 # PCI bus host bridge specific code
 #
 obj-$(CONFIG_MIPS_BONITO64)	+= ops-bonito64.o
-obj-$(CONFIG_MIPS_GT64111)	+= ops-gt64111.o
-obj-$(CONFIG_MIPS_GT64120)	+= ops-gt64120.o
+obj-$(CONFIG_PCI_GT64XXX_PCI0)	+= ops-gt64xxx_pci0.o
 obj-$(CONFIG_PCI_MARVELL)	+= ops-marvell.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c
index f8696081c5b1..73d18503517c 100644
--- a/arch/mips/pci/fixup-jmr3927.c
+++ b/arch/mips/pci/fixup-jmr3927.c
@@ -29,7 +29,6 @@
  */
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/jmr3927/jmr3927.h>
@@ -38,6 +37,10 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
+	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
+	if (dev->vendor == PCI_VENDOR_ID_EFAR &&
+	    dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1)
+		return irq;
 	/* IRQ rotation (PICMG) */
 	irq--;			/* 0-3 */
 	if (dev->bus->parent == NULL &&
@@ -77,14 +80,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/* Check OnBoard Ethernet (IDSEL=A24, DevNu=13) */
 	if (dev->bus->parent == NULL &&
-	    slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(24)) {
-		extern int jmr3927_ether1_irq;
-		/* check this irq line was reserved for ether1 */
-		if (jmr3927_ether1_irq != JMR3927_IRQ_ETHER0)
-			irq = JMR3927_IRQ_ETHER0;
-		else
-			irq = 0;	/* disable */
-	}
+	    slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(24))
+		irq = JMR3927_IRQ_ETHER0;
 	return irq;
 }
 
@@ -93,13 +90,3 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 {
 	return 0;
 }
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
-	if (!(dev->vendor == PCI_VENDOR_ID_EFAR &&
-	      dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1))
-		return pci_get_irq(dev, pin);
-
-	dev->irq = irq;
-}
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index a176f2ca8656..36e5fb1b3786 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -14,8 +14,10 @@
 #include <asm/mipsregs.h>
 #include <asm/sni.h>
 
+#include <irq.h>
+
 /*
- * Shortcuts ...
+ * PCIMT Shortcuts ...
  */
 #define SCSI	PCIMT_IRQ_SCSI
 #define ETH	PCIMT_IRQ_ETHERNET
@@ -67,6 +69,50 @@ static char irq_tab_rm300d[8][5] __initdata = {
 	{     0, INTD, INTA, INTB, INTC },	/* Slot 4 */
 };
 
+static char irq_tab_rm300e[5][5] __initdata = {
+	/*       INTA  INTB  INTC  INTD */
+	{     0,    0,    0,    0,    0 },	/* HOST bridge */
+	{  SCSI, SCSI, SCSI, SCSI, SCSI },	/* SCSI */
+	{     0, INTC, INTD, INTA, INTB },	/* Bridge/i960 */
+	{     0, INTD, INTA, INTB, INTC },	/* Slot 1 */
+	{     0, INTA, INTB, INTC, INTD },	/* Slot 2 */
+};
+#undef SCSI
+#undef ETH
+#undef INTA
+#undef INTB
+#undef INTC
+#undef INTD
+
+
+/*
+ * PCIT Shortcuts ...
+ */
+#define SCSI0	PCIT_IRQ_SCSI0
+#define SCSI1	PCIT_IRQ_SCSI1
+#define ETH	PCIT_IRQ_ETHERNET
+#define INTA	PCIT_IRQ_INTA
+#define INTB	PCIT_IRQ_INTB
+#define INTC	PCIT_IRQ_INTC
+#define INTD	PCIT_IRQ_INTD
+
+static char irq_tab_pcit[13][5] __initdata = {
+	/*       INTA  INTB  INTC  INTD */
+	{     0,     0,     0,     0,     0 },	/* HOST bridge */
+	{ SCSI0, SCSI0, SCSI0, SCSI0, SCSI0 },	/* SCSI */
+	{ SCSI1, SCSI1, SCSI1, SCSI1, SCSI1 },	/* SCSI */
+	{   ETH,   ETH,   ETH,   ETH,   ETH },	/* Ethernet */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* PCI-PCI bridge */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 1 */
+	{     0,  INTB,  INTC,  INTD,  INTA },	/* Slot 2 */
+	{     0,  INTC,  INTD,  INTA,  INTB },	/* Slot 3 */
+	{     0,  INTD,  INTA,  INTB,  INTC },	/* Slot 4 */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 5 */
+};
+
 static inline int is_rm300_revd(void)
 {
 	unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
@@ -76,10 +122,24 @@ static inline int is_rm300_revd(void)
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	if (is_rm300_revd())
-		return irq_tab_rm300d[slot][pin];
+	switch (sni_brd_type) {
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        return irq_tab_pcit[slot][pin];
 
-	return irq_tab_rm200[slot][pin];
+	case SNI_BRD_PCI_MTOWER:
+	        if (is_rm300_revd())
+		        return irq_tab_rm300d[slot][pin];
+	        /* fall through */
+
+	case SNI_BRD_PCI_DESKTOP:
+	        return irq_tab_rm200[slot][pin];
+
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        return irq_tab_rm300e[slot][pin];
+	}
+
+	return 0;
 }
 
 /* Do platform specific device initialization at pci_enable_device() time */
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 8ae46481fcb7..7932dfe5eb9b 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -172,7 +172,11 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
 		error = -1;
 		DBG("Au1x Master Abort\n");
 	} else if ((status >> 28) & 0xf) {
-		DBG("PCI ERR detected: status %x\n", status);
+		DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
+
+		/* clear errors */
+		au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
+
 		*data = 0xffffffff;
 		error = -1;
 	}
diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c
deleted file mode 100644
index ecd3991bd0e4..000000000000
--- a/arch/mips/pci/ops-gt64111.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 2002 by Ralf Baechle
- * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/pci.h>
-#include <asm/io.h>
-#include <asm/gt64120.h>
-
-#include <asm/mach-cobalt/cobalt.h>
-
-/*
- * Device 31 on the GT64111 is used to generate PCI special
- * cycles, so we shouldn't expected to find a device there ...
- */
-static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn)
-{
-	if (bus->number == 0 && PCI_SLOT(devfn) < 31)
-		return 0;
-
-	return -1;
-}
-
-static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 * val)
-{
-	if (pci_range_ck(bus, devfn))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 4:
-		PCI_CFG_SET(devfn, where);
-		*val = GT_READ(GT_PCI0_CFGDATA_OFS);
-		return PCIBIOS_SUCCESSFUL;
-
-	case 2:
-		PCI_CFG_SET(devfn, (where & ~0x3));
-		*val = GT_READ(GT_PCI0_CFGDATA_OFS)
-		    >> ((where & 3) * 8);
-		return PCIBIOS_SUCCESSFUL;
-
-	case 1:
-		PCI_CFG_SET(devfn, (where & ~0x3));
-		*val = GT_READ(GT_PCI0_CFGDATA_OFS)
-		    >> ((where & 3) * 8);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	return PCIBIOS_BAD_REGISTER_NUMBER;
-}
-
-static int gt64111_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 val)
-{
-	u32 tmp;
-
-	if (pci_range_ck(bus, devfn))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	switch (size) {
-	case 4:
-		PCI_CFG_SET(devfn, where);
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, val);
-
-		return PCIBIOS_SUCCESSFUL;
-
-	case 2:
-		PCI_CFG_SET(devfn, (where & ~0x3));
-		tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
-		tmp &= ~(0xffff << ((where & 0x3) * 8));
-		tmp |= (val << ((where & 0x3) * 8));
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp);
-
-		return PCIBIOS_SUCCESSFUL;
-
-	case 1:
-		PCI_CFG_SET(devfn, (where & ~0x3));
-		tmp = GT_READ(GT_PCI0_CFGDATA_OFS);
-		tmp &= ~(0xff << ((where & 0x3) * 8));
-		tmp |= (val << ((where & 0x3) * 8));
-		GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp);
-
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	return PCIBIOS_BAD_REGISTER_NUMBER;
-}
-
-struct pci_ops gt64111_pci_ops = {
-	.read = gt64111_pci_read_config,
-	.write = gt64111_pci_write_config,
-};
diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64xxx_pci0.c
index 6335844d607a..3d896c5f413f 100644
--- a/arch/mips/pci/ops-gt64120.c
+++ b/arch/mips/pci/ops-gt64xxx_pci0.c
@@ -39,8 +39,8 @@
 #define PCI_CFG_TYPE1_DEV_SHF           11
 #define PCI_CFG_TYPE1_BUS_SHF           16
 
-static int gt64120_pcibios_config_access(unsigned char access_type,
-	struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
+static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type,
+		struct pci_bus *bus, unsigned int devfn, int where, u32 * data)
 {
 	unsigned char busnum = bus->number;
 	u32 intr;
@@ -100,13 +100,13 @@ static int gt64120_pcibios_config_access(unsigned char access_type,
  * We can't address 8 and 16 bit words directly.  Instead we have to
  * read/write a 32bit word and mask/modify the data we actually want.
  */
-static int gt64120_pcibios_read(struct pci_bus *bus, unsigned int devfn,
-                                int where, int size, u32 * val)
+static int gt64xxx_pci0_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+		int where, int size, u32 * val)
 {
 	u32 data = 0;
 
-	if (gt64120_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
-				          &data))
+	if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+	                                       where, &data))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (size == 1)
@@ -119,16 +119,16 @@ static int gt64120_pcibios_read(struct pci_bus *bus, unsigned int devfn,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int gt64120_pcibios_write(struct pci_bus *bus, unsigned int devfn,
-			      int where, int size, u32 val)
+static int gt64xxx_pci0_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+		int where, int size, u32 val)
 {
 	u32 data = 0;
 
 	if (size == 4)
 		data = val;
 	else {
-		if (gt64120_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
-		                                  where, &data))
+		if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus,
+		                                       devfn, where, &data))
 			return PCIBIOS_DEVICE_NOT_FOUND;
 
 		if (size == 1)
@@ -139,14 +139,14 @@ static int gt64120_pcibios_write(struct pci_bus *bus, unsigned int devfn,
 				(val << ((where & 3) << 3));
 	}
 
-	if (gt64120_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
-				       &data))
+	if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
+	                                       where, &data))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	return PCIBIOS_SUCCESSFUL;
 }
 
-struct pci_ops gt64120_pci_ops = {
-	.read = gt64120_pcibios_read,
-	.write = gt64120_pcibios_write
+struct pci_ops gt64xxx_pci0_ops = {
+	.read	= gt64xxx_pci0_pcibios_read,
+	.write	= gt64xxx_pci0_pcibios_write
 };
diff --git a/arch/mips/pci/ops-sni.c b/arch/mips/pci/ops-sni.c
index 2b0ccd6d9dcd..fa2d2c60f797 100644
--- a/arch/mips/pci/ops-sni.c
+++ b/arch/mips/pci/ops-sni.c
@@ -83,7 +83,82 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
 	return 0;
 }
 
-struct pci_ops sni_pci_ops = {
+struct pci_ops sni_pcimt_ops = {
 	.read = pcimt_read,
 	.write = pcimt_write,
 };
+
+static int pcit_set_config_address(unsigned int busno, unsigned int devfn, int reg)
+{
+	if ((devfn > 255) || (reg > 255) || (busno > 255))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	outl ((1 << 31) | ((busno & 0xff) << 16) | ((devfn & 0xff) << 8) | (reg & 0xfc), 0xcf8);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pcit_read(struct pci_bus *bus, unsigned int devfn, int reg,
+		      int size, u32 * val)
+{
+	int res;
+
+	/*
+	 * on bus 0 we need to check, whether there is a device answering
+	 * for the devfn by doing a config write and checking the result. If
+	 * we don't do it, we will get a data bus error
+	 */
+	if (bus->number == 0) {
+		pcit_set_config_address (0, 0, 0x68);
+		outl (inl (0xcfc) | 0xc0000000, 0xcfc);
+		if ((res = pcit_set_config_address(0, devfn, 0)))
+			return res;
+		outl (0xffffffff, 0xcfc);
+		pcit_set_config_address (0, 0, 0x68);
+		if (inl(0xcfc) & 0x100000)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+	if ((res = pcit_set_config_address(bus->number, devfn, reg)))
+		return res;
+
+	switch (size) {
+	case 1:
+		*val = inb(PCIMT_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		*val = inw(PCIMT_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		*val = inl(PCIMT_CONFIG_DATA);
+		break;
+	}
+	return 0;
+}
+
+static int pcit_write(struct pci_bus *bus, unsigned int devfn, int reg,
+		       int size, u32 val)
+{
+	int res;
+
+	if ((res = pcit_set_config_address(bus->number, devfn, reg)))
+		return res;
+
+	switch (size) {
+	case 1:
+		outb (val, PCIMT_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		outw (val, PCIMT_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		outl (val, PCIMT_CONFIG_DATA);
+		break;
+	}
+
+	return 0;
+}
+
+
+struct pci_ops sni_pcit_ops = {
+	.read = pcit_read,
+	.write = pcit_write,
+};
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 42530a0b84b3..aa698bd0d5e3 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -40,7 +40,6 @@
 
 #include <asm/addrspace.h>
 #include <asm/jmr3927/jmr3927.h>
-#include <asm/debug.h>
 
 static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
 	unsigned char where)
@@ -130,234 +129,3 @@ struct pci_ops jmr3927_pci_ops = {
 	jmr3927_pci_read_config,
 	jmr3927_pci_write_config,
 };
-
-
-#ifndef JMR3927_INIT_INDIRECT_PCI
-
-inline unsigned long tc_readl(volatile __u32 * addr)
-{
-	return readl(addr);
-}
-
-inline void tc_writel(unsigned long data, volatile __u32 * addr)
-{
-	writel(data, addr);
-}
-#else
-
-unsigned long tc_readl(volatile __u32 * addr)
-{
-	unsigned long val;
-
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) CPHYSADDR(addr);
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) |
-	    PCI_IPCIBE_IBE_LONG;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	val =
-	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
-			ipcidata);
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-	return val;
-}
-
-void tc_writel(unsigned long data, volatile __u32 * addr)
-{
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
-	    cpu_to_le32(data);
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) CPHYSADDR(addr);
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) |
-	    PCI_IPCIBE_IBE_LONG;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-unsigned char tx_ioinb(unsigned char *addr)
-{
-	unsigned long val;
-	__u32 ioaddr;
-	int offset;
-	int byte;
-
-	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	byte = 0xf & ~(8 >> offset);
-
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) ioaddr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	val =
-	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
-			ipcidata);
-	val = val & 0xff;
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-	return val;
-}
-
-void tx_iooutb(unsigned long data, unsigned char *addr)
-{
-	__u32 ioaddr;
-	int offset;
-	int byte;
-
-	data = data | (data << 8) | (data << 16) | (data << 24);
-	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	byte = 0xf & ~(8 >> offset);
-
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) ioaddr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-unsigned short tx_ioinw(unsigned short *addr)
-{
-	unsigned long val;
-	__u32 ioaddr;
-	int offset;
-	int byte;
-
-	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x2;
-	byte = 3 << offset;
-
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) ioaddr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	val =
-	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
-			ipcidata);
-	val = val & 0xffff;
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-	return val;
-
-}
-
-void tx_iooutw(unsigned long data, unsigned short *addr)
-{
-	__u32 ioaddr;
-	int offset;
-	int byte;
-
-	data = data | (data << 16);
-	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x2;
-	byte = 3 << offset;
-
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) ioaddr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-unsigned long tx_ioinl(unsigned int *addr)
-{
-	unsigned long val;
-	__u32 ioaddr;
-
-	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) ioaddr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) |
-	    PCI_IPCIBE_IBE_LONG;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	val =
-	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
-			ipcidata);
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-	return val;
-}
-
-void tx_iooutl(unsigned long data, unsigned int *addr)
-{
-	__u32 ioaddr;
-
-	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
-	    cpu_to_le32(data);
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) ioaddr;
-	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
-	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) |
-	    PCI_IPCIBE_IBE_LONG;
-	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
-	/* clear by setting */
-	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
-}
-
-void tx_insbyte(unsigned char *addr, void *buffer, unsigned int count)
-{
-	unsigned char *ptr = (unsigned char *) buffer;
-
-	while (count--) {
-		*ptr++ = tx_ioinb(addr);
-	}
-}
-
-void tx_insword(unsigned short *addr, void *buffer, unsigned int count)
-{
-	unsigned short *ptr = (unsigned short *) buffer;
-
-	while (count--) {
-		*ptr++ = tx_ioinw(addr);
-	}
-}
-
-void tx_inslong(unsigned int *addr, void *buffer, unsigned int count)
-{
-	unsigned long *ptr = (unsigned long *) buffer;
-
-	while (count--) {
-		*ptr++ = tx_ioinl(addr);
-	}
-}
-
-void tx_outsbyte(unsigned char *addr, void *buffer, unsigned int count)
-{
-	unsigned char *ptr = (unsigned char *) buffer;
-
-	while (count--) {
-		tx_iooutb(*ptr++, addr);
-	}
-}
-
-void tx_outsword(unsigned short *addr, void *buffer, unsigned int count)
-{
-	unsigned short *ptr = (unsigned short *) buffer;
-
-	while (count--) {
-		tx_iooutw(*ptr++, addr);
-	}
-}
-
-void tx_outslong(unsigned int *addr, void *buffer, unsigned int count)
-{
-	unsigned long *ptr = (unsigned long *) buffer;
-
-	while (count--) {
-		tx_iooutl(*ptr++, addr);
-	}
-}
-#endif
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index f6774f54cd3c..d7b9e1349f6d 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -216,7 +216,7 @@ static int __init bcm1480_pcibios_init(void)
 	/*
 	 * See if the PCI bus has been configured by the firmware.
 	 */
-	reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+	reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
 	if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
 		bcm1480_bus_status |= PCI_DEVICE_MODE;
 	} else {
diff --git a/arch/mips/pci/pci-ev64120.c b/arch/mips/pci/pci-ev64120.c
index 9cd859ef1842..a84f594b5a18 100644
--- a/arch/mips/pci/pci-ev64120.c
+++ b/arch/mips/pci/pci-ev64120.c
@@ -1,4 +1,5 @@
 #include <linux/pci.h>
+#include <asm/irq.h>
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index 88fb191ad2eb..985784a3e6f8 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -12,7 +12,7 @@
 #include <asm/bootinfo.h>
 
 extern struct pci_ops nile4_pci_ops;
-extern struct pci_ops gt64120_pci_ops;
+extern struct pci_ops gt64xxx_pci0_ops;
 static struct resource lasat_pci_mem_resource = {
 	.name	= "LASAT PCI MEM",
 	.start	= 0x18000000,
@@ -38,7 +38,7 @@ static int __init lasat_pci_setup(void)
 
 	switch (mips_machtype) {
 	case MACH_LASAT_100:
-                lasat_pci_controller.pci_ops = &gt64120_pci_ops;
+                lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
                 break;
 	case MACH_LASAT_200:
                 lasat_pci_controller.pci_ops = &nile4_pci_ops;
diff --git a/arch/mips/pci/pci-ocelot.c b/arch/mips/pci/pci-ocelot.c
index 2b9495dce6ba..7f94f26d35ae 100644
--- a/arch/mips/pci/pci-ocelot.c
+++ b/arch/mips/pci/pci-ocelot.c
@@ -81,7 +81,7 @@ static struct resource ocelot_io_resource = {
 };
 
 static struct pci_controller ocelot_pci_controller = {
-	.pci_ops	= gt64120_pci_ops;
+	.pci_ops	= gt64xxx_pci0_ops;
 	.mem_resource	= &ocelot_mem_resource;
 	.io_resource	= &ocelot_io_resource;
 };
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 80f5e8c4bcd4..75c1246ced5f 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -228,7 +228,7 @@ static int __init sb1250_pcibios_init(void)
 	/*
 	 * See if the PCI bus has been configured by the firmware.
 	 */
-	reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+	reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
 	if (!(reg & M_SYS_PCI_HOST)) {
 		sb1250_bus_status |= PCI_DEVICE_MODE;
 	} else {
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 5ace368657ad..8108231f2e20 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -77,8 +77,28 @@ pcibios_align_resource(void *data, struct resource *res,
 
 void __init register_pci_controller(struct pci_controller *hose)
 {
+	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+		goto out;
+	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+		release_resource(hose->mem_resource);
+		goto out;
+	}
+
 	*hose_tail = hose;
 	hose_tail = &hose->next;
+
+	/*
+	 * Do not panic here but later - this might hapen before console init.
+	 */
+	if (!hose->io_map_base) {
+		printk(KERN_WARNING
+		       "registering PCI controller with io_map_base unset\n");
+	}
+	return;
+
+out:
+	printk(KERN_WARNING
+	       "Skipping PCI bus scan due to resource conflict\n");
 }
 
 /* Most MIPS systems have straight-forward swizzling needs.  */
@@ -113,11 +133,6 @@ static int __init pcibios_init(void)
 	/* Scan all of the recorded PCI controllers.  */
 	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
 
-		if (request_resource(&iomem_resource, hose->mem_resource) < 0)
-			goto out;
-		if (request_resource(&ioport_resource, hose->io_resource) < 0)
-			goto out_free_mem_resource;
-
 		if (!hose->iommu)
 			PCI_DMA_BUS_IS_PHYS = 1;
 
@@ -136,14 +151,6 @@ static int __init pcibios_init(void)
 				need_domain_info = 1;
 			}
 		}
-		continue;
-
-out_free_mem_resource:
-		release_resource(hose->mem_resource);
-
-out:
-		printk(KERN_WARNING
-		       "Skipping PCI bus scan due to resource conflict\n");
 	}
 
 	if (!pci_probe_only)
@@ -223,7 +230,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return pcibios_plat_dev_init(dev);
 }
 
-static void __init pcibios_fixup_device_resources(struct pci_dev *dev,
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev,
 	struct pci_bus *bus)
 {
 	/* Update device resources.  */
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
index d48665ebd33c..aad03429a5e3 100644
--- a/arch/mips/philips/pnx8550/common/int.c
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -83,16 +83,15 @@ static void timer_irqdispatch(int irq)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP2)
 		hw0_irqdispatch(2);
 	else if (pending & STATUSF_IP7) {
 		if (read_c0_config7() & 0x01c0)
 			timer_irqdispatch(7);
-	}
-
-	spurious_interrupt();
+	} else
+		spurious_interrupt();
 }
 
 static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
@@ -204,19 +203,7 @@ void __init arch_init_irq(void)
 		 * Note, PCI INTA is active low on the bus, but inverted
 		 * in the GIC, so to us it's active high.
 		 */
-#ifdef CONFIG_PNX8550_V2PCI
-		if (gic_int_line == (PNX8550_INT_GPIO0 - PNX8550_INT_GIC_MIN)) {
-			/* PCI INT through gpio 8, which is setup in
-			 * pnx8550_setup.c and routed to GPIO
-			 * Interrupt Level 0 (GPIO Connection 58).
-			 * Set it active low. */
-
-			PNX8550_GIC_REQ(gic_int_line) = 0x1E020000;
-		} else
-#endif
-		{
-			PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
-		}
+		PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000;
 
 		/* mask/priority is still 0 so we will not get any
 		 * interrupts until it is unmasked */
diff --git a/arch/mips/philips/pnx8550/common/prom.c b/arch/mips/philips/pnx8550/common/prom.c
index 8aeed6c2b8c3..2f567452e7ac 100644
--- a/arch/mips/philips/pnx8550/common/prom.c
+++ b/arch/mips/philips/pnx8550/common/prom.c
@@ -112,7 +112,7 @@ void __init prom_free_prom_memory(void)
 
 extern int pnx8550_console_port;
 
-/* used by prom_printf */
+/* used by early printk */
 void prom_putchar(char c)
 {
 	if (pnx8550_console_port != -1) {
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c
index e62123ca9b64..5bd737477685 100644
--- a/arch/mips/philips/pnx8550/common/setup.c
+++ b/arch/mips/philips/pnx8550/common/setup.c
@@ -41,8 +41,6 @@
 #include <uart.h>
 #include <nand.h>
 
-extern void prom_printf(char *fmt, ...);
-
 extern void __init board_setup(void);
 extern void pnx8550_machine_restart(char *);
 extern void pnx8550_machine_halt(void);
@@ -51,7 +49,6 @@ extern struct resource ioport_resource;
 extern struct resource iomem_resource;
 extern void pnx8550_time_init(void);
 extern void rs_kgdb_hook(int tty_no);
-extern void prom_printf(char *fmt, ...);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -141,7 +138,7 @@ void __init plat_mem_setup(void)
 		argptr += strlen("console=ttyS");
 		pnx8550_console_port = *argptr == '0' ? 0 : 1;
 
-		/* We must initialize the UART (console) before prom_printf */
+		/* We must initialize the UART (console) before early printk */
 		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
 		ip3106_lcr(UART_BASE, pnx8550_console_port) =
 			PNX8XXX_UART_LCR_8BIT;
@@ -155,8 +152,8 @@ void __init plat_mem_setup(void)
 		argptr += strlen("kgdb=ttyS");
 		line = *argptr == '0' ? 0 : 1;
 		rs_kgdb_hook(line);
-		prom_printf("KGDB: Using ttyS%i for session, "
-				"please connect your debugger\n", line ? 1 : 0);
+		pr_info("KGDB: Using ttyS%i for session, "
+		        "please connect your debugger\n", line ? 1 : 0);
 	}
 #endif
 	return;
diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c
index 757e605693ff..b7f1d9c4a8a3 100644
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@@ -107,8 +107,3 @@ void prom_putchar(char c)
 	while ((readb_outer_space(lsr) & 0x20) == 0);
 	writeb_outer_space(thr, c);
 }
-
-char __init prom_getchar(void)
-{
-	return 0;
-}
diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c
index 5a12354cd576..786bbfa214d1 100644
--- a/arch/mips/qemu/q-smp.c
+++ b/arch/mips/qemu/q-smp.c
@@ -46,3 +46,10 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
 void prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 }
+
+void __init plat_smp_setup(void)
+{
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+}
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index 6aa4c0cd169c..b6d649241dc1 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -7,5 +7,3 @@ obj-y	+= ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \
 	   ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o
 
 obj-$(CONFIG_EISA)	+= ip22-eisa.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index b454924aeb56..18348321795d 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -237,7 +237,7 @@ extern void indy_8254timer_irq(void);
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_cause();
+	unsigned int pending = read_c0_status() & read_c0_cause();
 
 	/*
 	 * First we check for r4k counter/timer IRQ.
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index fd29fd407ae8..e19d60d5fcc1 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -52,8 +52,7 @@
  * national semiconductor nv ram chip the op code is 3 bits and
  * the address is 6/8 bits.
  */
-static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
-			      unsigned reg)
+static inline void eeprom_cmd(unsigned int *ctrl, unsigned cmd, unsigned reg)
 {
 	unsigned short ser_cmd;
 	int i;
@@ -61,33 +60,34 @@ static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd,
 	ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND));
 	for (i = 0; i < BITS_IN_COMMAND; i++) {
 		if (ser_cmd & (1<<15))	/* if high order bit set */
-			*ctrl |= EEPROM_DATO;
+			writel(readl(ctrl) | EEPROM_DATO, ctrl);
 		else
-			*ctrl &= ~EEPROM_DATO;
-		*ctrl &= ~EEPROM_ECLK;
-		*ctrl |= EEPROM_ECLK;
+			writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
+		writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
+		writel(readl(ctrl) | EEPROM_ECLK, ctrl);
 		ser_cmd <<= 1;
 	}
-	*ctrl &= ~EEPROM_DATO;	/* see data sheet timing diagram */
+	/* see data sheet timing diagram */
+	writel(readl(ctrl) & ~EEPROM_DATO, ctrl);
 }
 
-unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg)
+unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg)
 {
 	unsigned short res = 0;
 	int i;
 
-	*ctrl &= ~EEPROM_EPROT;
+	writel(readl(ctrl) & ~EEPROM_EPROT, ctrl);
 	eeprom_cs_on(ctrl);
 	eeprom_cmd(ctrl, EEPROM_READ, reg);
 
 	/* clock the data ouf of serial mem */
 	for (i = 0; i < 16; i++) {
-		*ctrl &= ~EEPROM_ECLK;
+		writel(readl(ctrl) & ~EEPROM_ECLK, ctrl);
 		delay();
-		*ctrl |= EEPROM_ECLK;
+		writel(readl(ctrl) | EEPROM_ECLK, ctrl);
 		delay();
 		res <<= 1;
-		if (*ctrl & EEPROM_DATI)
+		if (readl(ctrl) & EEPROM_DATI)
 			res |= 1;
 	}
 
diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c
index 205554734099..8e88a442b22a 100644
--- a/arch/mips/sgi-ip22/ip22-time.c
+++ b/arch/mips/sgi-ip22/ip22-time.c
@@ -94,7 +94,7 @@ static int indy_rtc_set_time(unsigned long tim)
 static unsigned long dosample(void)
 {
 	u32 ct0, ct1;
-	volatile u8 msb, lsb;
+	u8 msb, lsb;
 
 	/* Start the counter. */
 	sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
@@ -107,21 +107,21 @@ static unsigned long dosample(void)
 
 	/* Latch and spin until top byte of counter2 is zero */
 	do {
-		sgint->tcword = SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT;
-		lsb = sgint->tcnt2;
-		msb = sgint->tcnt2;
+		writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword);
+		lsb = readb(&sgint->tcnt2);
+		msb = readb(&sgint->tcnt2);
 		ct1 = read_c0_count();
 	} while (msb);
 
 	/* Stop the counter. */
-	sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
-			 SGINT_TCWORD_MSWST);
+	writeb(sgint->tcword, (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL |
+			       SGINT_TCWORD_MSWST));
 	/*
 	 * Return the difference, this is how far the r4k counter increments
 	 * for every 1/HZ seconds. We round off the nearest 1 MHz of master
 	 * clock (= 1000000 / HZ / 2).
 	 */
-	/*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
+
 	return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
 }
 
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index a457263f4391..7ce76e20beb9 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -9,5 +9,3 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
 obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 14211e382374..3ba830651c58 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -6,12 +6,6 @@
  * Copyright (C) 2001, 2002 Ralf Baechle
  */
 #include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/termios.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
 
 #include <asm/page.h>
 #include <asm/semaphore.h>
@@ -38,37 +32,10 @@ static inline struct ioc3_uartregs *console_uart(void)
 	return &ioc3->sregs.uarta;
 }
 
-void prom_putchar(char c)
+void __init prom_putchar(char c)
 {
 	struct ioc3_uartregs *uart = console_uart();
 
 	while ((uart->iu_lsr & 0x20) == 0);
 	uart->iu_thr = c;
 }
-
-static void ioc3_console_write(struct console *con, const char *s, unsigned n)
-{
-	while (n-- && *s) {
-		if (*s == '\n')
-			prom_putchar('\r');
-		prom_putchar(*s);
-		s++;
-	}
-}
-
-static struct console ioc3_console = {
-	.name	= "ioc3",
-	.write	= ioc3_console_write,
-	.flags	= CON_PRINTBUFFER | CON_BOOT,
-	.index	= -1
-};
-
-__init void ip27_setup_console(void)
-{
-	register_console(&ioc3_console);
-}
-
-void __init disable_early_printk(void)
-{
-	unregister_console(&ioc3_console);
-}
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 9094baf31d0e..74158d349630 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -191,7 +191,6 @@ static inline void ioc3_eth_init(void)
 	ioc3->eier = 0;
 }
 
-extern void ip27_setup_console(void);
 extern void ip27_time_init(void);
 extern void ip27_reboot_setup(void);
 
@@ -200,7 +199,6 @@ void __init plat_mem_setup(void)
 	hubreg_t p, e, n_mode;
 	nasid_t nid;
 
-	ip27_setup_console();
 	ip27_reboot_setup();
 
 	/*
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 0e3d535e9f43..fe8a1066aec1 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -21,6 +21,7 @@
 #include <linux/pfn.h>
 #include <linux/highmem.h>
 #include <asm/page.h>
+#include <asm/pgalloc.h>
 #include <asm/sections.h>
 
 #include <asm/sn/arch.h>
@@ -503,7 +504,6 @@ void __init prom_free_prom_memory(void)
 	/* We got nothing to free here ...  */
 }
 
-extern void pagetable_init(void);
 extern unsigned long setup_zero_pages(void);
 
 void __init paging_init(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 9ce513629b14..8c3c78c63ccd 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -190,7 +190,7 @@ static struct irq_chip rt_irq_type = {
 };
 
 static struct irqaction rt_irqaction = {
-	.handler	= ip27_rt_timer_interrupt,
+	.handler	= (irq_handler_t) ip27_rt_timer_interrupt,
 	.flags		= IRQF_DISABLED,
 	.mask		= CPU_MASK_NONE,
 	.name		= "timer"
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
index 530bf848c3d0..7e1416768a60 100644
--- a/arch/mips/sgi-ip32/Makefile
+++ b/arch/mips/sgi-ip32/Makefile
@@ -5,5 +5,3 @@
 
 obj-y	+= ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \
 	   crime.o ip32-memory.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 8c450d9e8696..fb9da9acf53f 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -454,7 +454,7 @@ static void ip32_irq5(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_cause();
+	unsigned int pending = read_c0_status() & read_c0_cause();
 
 	if (likely(pending & IE_IRQ0))
 		ip32_irq0();
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index ec7a2cffacf0..e6b003ec6716 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -1,35 +1,41 @@
 config SIBYTE_SB1250
 	bool
 	select HW_HAS_PCI
-	select SIBYTE_HAS_LDT
+	select SIBYTE_ENABLE_LDT_IF_PCI
+	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 	select SYS_SUPPORTS_SMP
 
 config SIBYTE_BCM1120
 	bool
 	select SIBYTE_BCM112X
+	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 
 config SIBYTE_BCM1125
 	bool
 	select HW_HAS_PCI
 	select SIBYTE_BCM112X
+	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 
 config SIBYTE_BCM1125H
 	bool
 	select HW_HAS_PCI
 	select SIBYTE_BCM112X
-	select SIBYTE_HAS_LDT
+	select SIBYTE_ENABLE_LDT_IF_PCI
+	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 
 config SIBYTE_BCM112X
 	bool
 	select SIBYTE_SB1xxx_SOC
+	select SIBYTE_HAS_ZBUS_PROFILING
 
 config SIBYTE_BCM1x80
 	bool
 	select HW_HAS_PCI
+	select SIBYTE_HAS_ZBUS_PROFILING
 	select SIBYTE_SB1xxx_SOC
 	select SYS_SUPPORTS_SMP
 
@@ -37,6 +43,7 @@ config SIBYTE_BCM1x55
 	bool
 	select HW_HAS_PCI
 	select SIBYTE_SB1xxx_SOC
+	select SIBYTE_HAS_ZBUS_PROFILING
 	select SYS_SUPPORTS_SMP
 
 config SIBYTE_SB1xxx_SOC
@@ -95,8 +102,10 @@ config CPU_SB1_PASS_2
 
 config SIBYTE_HAS_LDT
 	bool
-	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-	default y
+
+config SIBYTE_ENABLE_LDT_IF_PCI
+	bool
+	select SIBYTE_HAS_LDT if PCI
 
 config SIMULATION
 	bool "Running under simulation"
@@ -116,6 +125,7 @@ config SB1_CERR_STALL
 config SIBYTE_CFE
 	bool "Booting from CFE"
 	depends on SIBYTE_SB1xxx_SOC
+	select SYS_HAS_EARLY_PRINTK
 	help
 	  Make use of the CFE API for enumerating available memory,
 	  controlling secondary CPUs, and possibly console output.
@@ -131,6 +141,7 @@ config SIBYTE_CFE_CONSOLE
 config SIBYTE_STANDALONE
 	bool
 	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+	select SYS_HAS_EARLY_PRINTK
 	default y
 
 config SIBYTE_STANDALONE_RAM_SIZE
@@ -160,5 +171,8 @@ config SIBYTE_SB1250_PROF
 	depends on SIBYTE_SB1xxx_SOC
 
 config SIBYTE_TBPROF
-	bool "Support for ZBbus profiling"
-	depends on SIBYTE_SB1xxx_SOC
+	tristate "Support for ZBbus profiling"
+	depends on SIBYTE_HAS_ZBUS_PROFILING
+
+config SIBYTE_HAS_ZBUS_PROFILING
+	bool
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
index 7b36ff3873b7..cdc4c56c3e29 100644
--- a/arch/mips/sibyte/bcm1480/Makefile
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -1,5 +1,3 @@
 obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 1dc5d05d8962..ba0c4b776c85 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -141,11 +141,11 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
 	unsigned long flags;
 	unsigned int irq_dirty;
 
-	i = first_cpu(mask);
-	if (next_cpu(i, mask) <= NR_CPUS) {
+	if (cpus_weight(mask) != 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
 		return;
 	}
+	i = first_cpu(mask);
 
 	/* Convert logical CPU to physical CPU */
 	cpu = cpu_logical_map(i);
@@ -420,7 +420,7 @@ void __init arch_init_irq(void)
 #ifdef CONFIG_GDB_CONSOLE
 		register_gdb_console();
 #endif
-		prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
+		printk("Waiting for GDB on UART port %d\n", kgdb_port);
 		set_debug_traps();
 		breakpoint();
 	}
diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c
index 8236d0c48542..bdaac34ae708 100644
--- a/arch/mips/sibyte/bcm1480/setup.c
+++ b/arch/mips/sibyte/bcm1480/setup.c
@@ -69,7 +69,7 @@ static inline int sys_rev_decode(void)
 		break;
 
 	    default:
-		prom_printf("Unknown part type %x\n", part_type);
+		printk("Unknown part type %x\n", part_type);
 		ret = 1;
 		break;
 	}
@@ -102,7 +102,7 @@ static inline int setup_bcm1x80_bcm1x55(void)
 		pass_str = "B0 (pass2)";
 		break;
 	    default:
-		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+		printk("Unknown %s rev %x\n", soc_str, soc_pass);
 		periph_rev = 1;
 		pass_str = "Unknown Revision";
 		break;
@@ -122,14 +122,14 @@ void bcm1480_setup(void)
 	soc_pass = G_SYS_REVISION(sys_rev);
 
 	if (sys_rev_decode()) {
-		prom_printf("Restart after failure to identify SiByte chip\n");
+		printk("Restart after failure to identify SiByte chip\n");
 		machine_restart(NULL);
 	}
 
 	plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
 
-	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
+	printk("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
 		    soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
-	prom_printf("Board type: %s\n", get_system_type());
+	printk("Board type: %s\n", get_system_type());
 }
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index bf328277c775..6eac36d1b8c8 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -34,21 +34,21 @@ extern void smp_call_function_interrupt(void);
  * independent of board/firmware
  */
 
-static volatile void *mailbox_0_set_regs[] = {
+static void *mailbox_0_set_regs[] = {
 	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
 	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
 	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
 	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
 };
 
-static volatile void *mailbox_0_clear_regs[] = {
+static void *mailbox_0_clear_regs[] = {
 	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
 	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
 	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
 	IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
 };
 
-static volatile void *mailbox_0_regs[] = {
+static void *mailbox_0_regs[] = {
 	IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
 	IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
 	IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index 9e6099e69622..ae4a92c3e529 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -221,10 +221,10 @@ static int __init initrd_setup(char *str)
 		goto fail;
 	}
 	initrd_end = initrd_start + initrd_size;
-	prom_printf("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
+	printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
 	return 1;
  fail:
-	prom_printf("Bad initrd argument.  Disabling initrd\n");
+	printk("Bad initrd argument.  Disabling initrd\n");
 	initrd_start = 0;
 	initrd_end = 0;
 	return 1;
@@ -281,7 +281,7 @@ void __init prom_init(void)
 	}
 	if (cfe_eptseal != CFE_EPTSEAL) {
 		/* too early for panic to do any good */
-		prom_printf("CFE's entrypoint seal doesn't match. Spinning.");
+		printk("CFE's entrypoint seal doesn't match. Spinning.");
 		while (1) ;
 	}
 	cfe_init(cfe_handle, cfe_ept);
@@ -303,7 +303,7 @@ void __init prom_init(void)
 		} else {
 			/* The loader should have set the command line */
 			/* too early for panic to do any good */
-			prom_printf("LINUX_CMDLINE not defined in cfe.");
+			printk("LINUX_CMDLINE not defined in cfe.");
 			while (1) ;
 		}
 	}
diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile
new file mode 100644
index 000000000000..8a06a4fb5212
--- /dev/null
+++ b/arch/mips/sibyte/common/Makefile
@@ -0,0 +1,5 @@
+obj-y :=
+
+obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 212547c57310..4fcdaa8ba514 100644
--- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -1,6 +1,4 @@
 /*
- * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
- *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
@@ -14,10 +12,16 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ *    written by Ralf Baechle <ralf@linux-mips.org>
  */
 
-#define SBPROF_TB_DEBUG 0
+#undef DEBUG
 
+#include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -27,24 +31,113 @@
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/smp_lock.h>
 #include <linux/wait.h>
-#include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
+
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_scd.h>
 #include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/trace_prof.h>
+#else
+#error invalid SiByte UART configuation
+#endif
+
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#undef K_INT_TRACE_FREEZE
+#define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE
+#undef K_INT_PERF_CNT
+#define K_INT_PERF_CNT K_BCM1480_INT_PERF_CNT
+#endif
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
 
-#define DEVNAME "bcm1250_tbprof"
+#define SBPROF_TB_MAJOR 240
+
+typedef u64 tb_sample_t[6*256];
+
+enum open_status {
+	SB_CLOSED,
+	SB_OPENING,
+	SB_OPEN
+};
+
+struct sbprof_tb {
+	wait_queue_head_t	tb_sync;
+	wait_queue_head_t	tb_read;
+	struct mutex		lock;
+	enum open_status	open;
+	tb_sample_t		*sbprof_tbbuf;
+	int			next_tb_sample;
+
+	volatile int		tb_enable;
+	volatile int		tb_armed;
+
+};
 
 static struct sbprof_tb sbp;
 
+#define MAX_SAMPLE_BYTES (24*1024*1024)
+#define MAX_TBSAMPLE_BYTES (12*1024*1024)
+
+#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
+#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
+#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
+
+/* ioctls */
+#define SBPROF_ZBSTART		_IOW('s', 0, int)
+#define SBPROF_ZBSTOP		_IOW('s', 1, int)
+#define SBPROF_ZBWAITFULL	_IOW('s', 2, int)
+
+/*
+ * Routines for using 40-bit SCD cycle counter
+ *
+ * Client responsible for either handling interrupts or making sure
+ * the cycles counter never saturates, e.g., by doing
+ * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
+ */
+
+/*
+ * Configures SCD counter 0 to count ZCLKs starting from val;
+ * Configures SCD counters1,2,3 to count nothing.
+ * Must not be called while gathering ZBbus profiles.
+ */
+
+#define zclk_timer_init(val) \
+  __asm__ __volatile__ (".set push;" \
+			".set mips64;" \
+			"la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+			"sd   %0, 0x10($8);"   /* write val to counter0 */ \
+			"sd   %1, 0($8);"      /* config counter0 for zclks*/ \
+			".set pop" \
+			: /* no outputs */ \
+						     /* enable, counter0 */ \
+			: /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
+			: /* modifies */ "$8" )
+
+
+/* Reads SCD counter 0 and puts result in value
+   unsigned long long val; */
+#define zclk_get(val) \
+  __asm__ __volatile__ (".set push;" \
+			".set mips64;" \
+			"la   $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+			"ld   %0, 0x10($8);"   /* write val to counter0 */ \
+			".set pop" \
+			: /* outputs */ "=r"(val) \
+			: /* inputs */ \
+			: /* modifies */ "$8" )
+
+#define DEVNAME "sb_tbprof"
+
 #define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
 
-/************************************************************************
+/*
  * Support for ZBbus sampling using the trace buffer
  *
  * We use the SCD performance counter interrupt, caused by a Zclk counter
@@ -55,28 +148,46 @@ static struct sbprof_tb sbp;
  *
  * We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
  *
- ************************************************************************/
+ */
 
-static u_int64_t tb_period;
+static u64 tb_period;
 
 static void arm_tb(void)
 {
-        u_int64_t scdperfcnt;
-	u_int64_t next = (1ULL << 40) - tb_period;
-	u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
-	/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
-	   trigger start of trace.  XXX vary sampling period */
+        u64 scdperfcnt;
+	u64 next = (1ULL << 40) - tb_period;
+	u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
+
+	/*
+	 * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
+	 * trigger start of trace.  XXX vary sampling period
+	 */
 	__raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
 	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
-	/* Unfortunately, in Pass 2 we must clear all counters to knock down
-	   a previous interrupt request.  This means that bus profiling
-	   requires ALL of the SCD perf counters. */
+
+	/*
+	 * Unfortunately, in Pass 2 we must clear all counters to knock down
+	 * a previous interrupt request.  This means that bus profiling
+	 * requires ALL of the SCD perf counters.
+	 */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+						/* keep counters 0,2,3,4,5,6,7 as is */
+		     V_SPC_CFG_SRC1(1),		/* counter 1 counts cycles */
+		     IOADDR(A_BCM1480_SCD_PERF_CNT_CFG0));
+	__raw_writeq(
+		     M_SPC_CFG_ENABLE |		/* enable counting */
+		     M_SPC_CFG_CLEAR |		/* clear all counters */
+		     V_SPC_CFG_SRC1(1),		/* counter 1 counts cycles */
+		     IOADDR(A_BCM1480_SCD_PERF_CNT_CFG1));
+#else
 	__raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
-						// keep counters 0,2,3 as is
-		     M_SPC_CFG_ENABLE |		// enable counting
-		     M_SPC_CFG_CLEAR |		// clear all counters
-		     V_SPC_CFG_SRC1(1),		// counter 1 counts cycles
+						/* keep counters 0,2,3 as is */
+		     M_SPC_CFG_ENABLE |		/* enable counting */
+		     M_SPC_CFG_CLEAR |		/* clear all counters */
+		     V_SPC_CFG_SRC1(1),		/* counter 1 counts cycles */
 		     IOADDR(A_SCD_PERF_CNT_CFG));
+#endif
 	__raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
 	/* Reset the trace buffer */
 	__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
@@ -91,49 +202,51 @@ static void arm_tb(void)
 static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
 {
 	int i;
-	DBG(printk(DEVNAME ": tb_intr\n"));
+
+	pr_debug(DEVNAME ": tb_intr\n");
+
 	if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
 		/* XXX should use XKPHYS to make writes bypass L2 */
-		u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
+		u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
 		/* Read out trace */
 		__raw_writeq(M_SCD_TRACE_CFG_START_READ,
 			     IOADDR(A_SCD_TRACE_CFG));
 		__asm__ __volatile__ ("sync" : : : "memory");
 		/* Loop runs backwards because bundles are read out in reverse order */
 		for (i = 256 * 6; i > 0; i -= 6) {
-			// Subscripts decrease to put bundle in the order
-			//   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
+			/* Subscripts decrease to put bundle in the order */
+			/*   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
 			p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								// read t2 hi
+			/* read t2 hi */
 			p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								// read t2 lo
+			/* read t2 lo */
 			p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								// read t1 hi
+			/* read t1 hi */
 			p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								// read t1 lo
+			/* read t1 lo */
 			p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								// read t0 hi
+			/* read t0 hi */
 			p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
-								// read t0 lo
+			/* read t0 lo */
 		}
 		if (!sbp.tb_enable) {
-			DBG(printk(DEVNAME ": tb_intr shutdown\n"));
+			pr_debug(DEVNAME ": tb_intr shutdown\n");
 			__raw_writeq(M_SCD_TRACE_CFG_RESET,
 				     IOADDR(A_SCD_TRACE_CFG));
 			sbp.tb_armed = 0;
-			wake_up(&sbp.tb_sync);
+			wake_up_interruptible(&sbp.tb_sync);
 		} else {
-			arm_tb();	// knock down current interrupt and get another one later
+			/* knock down current interrupt and get another one later */
+			arm_tb();
 		}
 	} else {
 		/* No more trace buffer samples */
-		DBG(printk(DEVNAME ": tb_intr full\n"));
+		pr_debug(DEVNAME ": tb_intr full\n");
 		__raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
 		sbp.tb_armed = 0;
-		if (!sbp.tb_enable) {
-			wake_up(&sbp.tb_sync);
-		}
-		wake_up(&sbp.tb_read);
+		if (!sbp.tb_enable)
+			wake_up_interruptible(&sbp.tb_sync);
+		wake_up_interruptible(&sbp.tb_read);
 	}
 	return IRQ_HANDLED;
 }
@@ -144,23 +257,30 @@ static irqreturn_t sbprof_pc_intr(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-int sbprof_zbprof_start(struct file *filp)
+/*
+ * Requires: Already called zclk_timer_init with a value that won't
+ *           saturate 40 bits.  No subsequent use of SCD performance counters
+ *           or trace buffer.
+ */
+
+static int sbprof_zbprof_start(struct file *filp)
 {
-	u_int64_t scdperfcnt;
+	u64 scdperfcnt;
+	int err;
 
-	if (sbp.tb_enable)
+	if (xchg(&sbp.tb_enable, 1))
 		return -EBUSY;
 
-	DBG(printk(DEVNAME ": starting\n"));
+	pr_debug(DEVNAME ": starting\n");
 
-	sbp.tb_enable = 1;
 	sbp.next_tb_sample = 0;
 	filp->f_pos = 0;
 
-	if (request_irq
-	    (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, DEVNAME " trace freeze", &sbp)) {
+	err = request_irq (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
+			   DEVNAME " trace freeze", &sbp);
+	if (err)
 		return -EBUSY;
-	}
+
 	/* Make sure there isn't a perf-cnt interrupt waiting */
 	scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
 	/* Disable and clear counters, override SRC_1 */
@@ -168,21 +288,30 @@ int sbprof_zbprof_start(struct file *filp)
 		     M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
 		     IOADDR(A_SCD_PERF_CNT_CFG));
 
-	/* We grab this interrupt to prevent others from trying to use
-           it, even though we don't want to service the interrupts
-           (they only feed into the trace-on-interrupt mechanism) */
-	if (request_irq
-	    (K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
+	/*
+	 * We grab this interrupt to prevent others from trying to use
+         * it, even though we don't want to service the interrupts
+         * (they only feed into the trace-on-interrupt mechanism)
+	 */
+	if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
 		free_irq(K_INT_TRACE_FREEZE, &sbp);
 		return -EBUSY;
 	}
 
-	/* I need the core to mask these, but the interrupt mapper to
-	   pass them through.  I am exploiting my knowledge that
-	   cp0_status masks out IP[5]. krw */
+	/*
+	 * I need the core to mask these, but the interrupt mapper to
+	 *  pass them through.  I am exploiting my knowledge that
+	 *  cp0_status masks out IP[5]. krw
+	 */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	__raw_writeq(K_BCM1480_INT_MAP_I3,
+		     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) +
+			    ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3)));
+#else
 	__raw_writeq(K_INT_MAP_I3,
 		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
 			    (K_INT_PERF_CNT << 3)));
+#endif
 
 	/* Initialize address traps */
 	__raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
@@ -201,7 +330,7 @@ int sbprof_zbprof_start(struct file *filp)
 	__raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
 
 	/* Initialize Trace Event 0-7 */
-	//				when interrupt
+	/*				when interrupt  */
 	__raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
@@ -212,10 +341,10 @@ int sbprof_zbprof_start(struct file *filp)
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
 
 	/* Initialize Trace Sequence 0-7 */
-	//				     Start on event 0 (interrupt)
+	/*				     Start on event 0 (interrupt) */
 	__raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
 		     IOADDR(A_SCD_TRACE_SEQUENCE_0));
-	//			  dsamp when d used | asamp when a used
+	/*			  dsamp when d used | asamp when a used */
 	__raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
 		     K_SCD_TRSEQ_TRIGGER_ALL,
 		     IOADDR(A_SCD_TRACE_SEQUENCE_1));
@@ -227,40 +356,47 @@ int sbprof_zbprof_start(struct file *filp)
 	__raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
 
 	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	__raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f),
+		     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L)));
+#else
 	__raw_writeq(1ULL << K_INT_PERF_CNT,
 		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
-
+#endif
 	arm_tb();
 
-	DBG(printk(DEVNAME ": done starting\n"));
+	pr_debug(DEVNAME ": done starting\n");
 
 	return 0;
 }
 
-int sbprof_zbprof_stop(void)
+static int sbprof_zbprof_stop(void)
 {
-	DEFINE_WAIT(wait);
-	DBG(printk(DEVNAME ": stopping\n"));
+	int err = 0;
+
+	pr_debug(DEVNAME ": stopping\n");
 
 	if (sbp.tb_enable) {
+		/*
+		 * XXXKW there is a window here where the intr handler may run,
+		 * see the disable, and do the wake_up before this sleep
+		 * happens.
+		 */
+		pr_debug(DEVNAME ": wait for disarm\n");
+		err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed);
+		pr_debug(DEVNAME ": disarm complete, stat %d\n", err);
+
+		if (err)
+			return err;
+
 		sbp.tb_enable = 0;
-		/* XXXKW there is a window here where the intr handler
-		   may run, see the disable, and do the wake_up before
-		   this sleep happens. */
-		if (sbp.tb_armed) {
-			DBG(printk(DEVNAME ": wait for disarm\n"));
-			prepare_to_wait(&sbp.tb_sync, &wait, TASK_INTERRUPTIBLE);
-			schedule();
-			finish_wait(&sbp.tb_sync, &wait);
-			DBG(printk(DEVNAME ": disarm complete\n"));
-		}
 		free_irq(K_INT_TRACE_FREEZE, &sbp);
 		free_irq(K_INT_PERF_CNT, &sbp);
 	}
 
-	DBG(printk(DEVNAME ": done stopping\n"));
+	pr_debug(DEVNAME ": done stopping\n");
 
-	return 0;
+	return err;
 }
 
 static int sbprof_tb_open(struct inode *inode, struct file *filp)
@@ -268,22 +404,22 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp)
 	int minor;
 
 	minor = iminor(inode);
-	if (minor != 0) {
+	if (minor != 0)
 		return -ENODEV;
-	}
-	if (sbp.open) {
+
+	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
 		return -EBUSY;
-	}
 
 	memset(&sbp, 0, sizeof(struct sbprof_tb));
 	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
-	if (!sbp.sbprof_tbbuf) {
+	if (!sbp.sbprof_tbbuf)
 		return -ENOMEM;
-	}
 	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
 	init_waitqueue_head(&sbp.tb_sync);
 	init_waitqueue_head(&sbp.tb_read);
-	sbp.open = 1;
+	mutex_init(&sbp.lock);
+
+	sbp.open = SB_OPEN;
 
 	return 0;
 }
@@ -293,17 +429,19 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
 	int minor;
 
 	minor = iminor(inode);
-	if (minor != 0 || !sbp.open) {
+	if (minor != 0 || !sbp.open)
 		return -ENODEV;
-	}
 
-	if (sbp.tb_armed || sbp.tb_enable) {
+	mutex_lock(&sbp.lock);
+
+	if (sbp.tb_armed || sbp.tb_enable)
 		sbprof_zbprof_stop();
-	}
 
 	vfree(sbp.sbprof_tbbuf);
 	sbp.open = 0;
 
+	mutex_unlock(&sbp.lock);
+
 	return 0;
 }
 
@@ -316,16 +454,29 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
 	char *dest    =	 buf;
 	long  cur_off = *offp;
 
+	if (!access_ok(VERIFY_WRITE, buf, size))
+		return -EFAULT;
+
+	mutex_lock(&sbp.lock);
+
 	count = 0;
 	cur_sample = cur_off / TB_SAMPLE_SIZE;
 	sample_off = cur_off % TB_SAMPLE_SIZE;
 	sample_left = TB_SAMPLE_SIZE - sample_off;
+
 	while (size && (cur_sample < sbp.next_tb_sample)) {
+		int err;
+
 		cur_count = size < sample_left ? size : sample_left;
 		src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
-		copy_to_user(dest, src, cur_count);
-		DBG(printk(DEVNAME ": read from sample %d, %d bytes\n",
-			   cur_sample, cur_count));
+		err = __copy_to_user(dest, src, cur_count);
+		if (err) {
+			*offp = cur_off + cur_count - err;
+			mutex_unlock(&sbp.lock);
+			return err;
+		}
+		pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
+		         cur_sample, cur_count);
 		size -= cur_count;
 		sample_left -= cur_count;
 		if (!sample_left) {
@@ -340,6 +491,7 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf,
 		count += cur_count;
 	}
 	*offp = cur_off;
+	mutex_unlock(&sbp.lock);
 
 	return count;
 }
@@ -348,30 +500,36 @@ static long sbprof_tb_ioctl(struct file *filp,
 			    unsigned int command,
 			    unsigned long arg)
 {
-	int error = 0;
+	int err = 0;
 
-	lock_kernel();
 	switch (command) {
 	case SBPROF_ZBSTART:
-		error = sbprof_zbprof_start(filp);
+		mutex_lock(&sbp.lock);
+		err = sbprof_zbprof_start(filp);
+		mutex_unlock(&sbp.lock);
 		break;
+
 	case SBPROF_ZBSTOP:
-		error = sbprof_zbprof_stop();
+		mutex_lock(&sbp.lock);
+		err = sbprof_zbprof_stop();
+		mutex_unlock(&sbp.lock);
+		break;
+
+	case SBPROF_ZBWAITFULL: {
+		err = wait_event_interruptible(sbp.tb_read, TB_FULL);
+		if (err)
+			break;
+
+		err = put_user(TB_FULL, (int *) arg);
 		break;
-	case SBPROF_ZBWAITFULL:
-		DEFINE_WAIT(wait);
-		prepare_to_wait(&sbp.tb_read, &wait, TASK_INTERRUPTIBLE);
-		schedule();
-		finish_wait(&sbp.tb_read, &wait);
-		/* XXXKW check if interrupted? */
-		return put_user(TB_FULL, (int *) arg);
+	}
+
 	default:
-		error = -EINVAL;
+		err = -EINVAL;
 		break;
 	}
-	unlock_kernel();
 
-	return error;
+	return err;
 }
 
 static const struct file_operations sbprof_tb_fops = {
@@ -384,23 +542,60 @@ static const struct file_operations sbprof_tb_fops = {
 	.mmap		= NULL,
 };
 
+static struct class *tb_class;
+static struct device *tb_dev;
+
 static int __init sbprof_tb_init(void)
 {
+	struct device *dev;
+	struct class *tbc;
+	int err;
+
 	if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
 		printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
 		       SBPROF_TB_MAJOR);
 		return -EIO;
 	}
+
+	tbc = class_create(THIS_MODULE, "sb_tracebuffer");
+	if (IS_ERR(tbc)) {
+		err = PTR_ERR(tbc);
+		goto out_chrdev;
+	}
+
+	tb_class = tbc;
+
+	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+	if (IS_ERR(dev)) {
+		err = PTR_ERR(dev);
+		goto out_class;
+	}
+	tb_dev = dev;
+
 	sbp.open = 0;
 	tb_period = zbbus_mhz * 10000LL;
-	printk(KERN_INFO DEVNAME ": initialized - tb_period = %lld\n", tb_period);
+	pr_info(DEVNAME ": initialized - tb_period = %lld\n",
+		(long long) tb_period);
 	return 0;
+
+out_class:
+	class_destroy(tb_class);
+out_chrdev:
+	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+
+	return err;
 }
 
 static void __exit sbprof_tb_cleanup(void)
 {
+	device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
 	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+	class_destroy(tb_class);
 }
 
 module_init(sbprof_tb_init);
 module_exit(sbprof_tb_cleanup);
+
+MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR);
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
index a2fdbd62f8ac..df662c61473a 100644
--- a/arch/mips/sibyte/sb1250/Makefile
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -1,8 +1,5 @@
 obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
-obj-$(CONFIG_SIBYTE_TBPROF)		+= bcm1250_tbprof.o
 obj-$(CONFIG_SIBYTE_STANDALONE)		+= prom.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 148239446e6e..0e6a13c0bd0e 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -421,7 +421,7 @@ asmlinkage void plat_irq_dispatch(void)
 	 * blasting the high 32 bits.
 	 */
 
-	pending = read_c0_cause() & read_c0_status();
+	pending = read_c0_cause() & read_c0_status() & ST0_IM;
 
 #ifdef CONFIG_SIBYTE_SB1250_PROF
 	if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
index d0ee1d5b8223..f4a6169aa0a4 100644
--- a/arch/mips/sibyte/sb1250/setup.c
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 #include <linux/string.h>
@@ -32,6 +33,7 @@ unsigned int soc_pass;
 unsigned int soc_type;
 unsigned int periph_rev;
 unsigned int zbbus_mhz;
+EXPORT_SYMBOL(zbbus_mhz);
 
 static char *soc_str;
 static char *pass_str;
@@ -67,7 +69,7 @@ static int __init sys_rev_decode(void)
 		ret = setup_bcm112x();
 		break;
 	default:
-		prom_printf("Unknown SOC type %x\n", soc_type);
+		printk("Unknown SOC type %x\n", soc_type);
 		ret = 1;
 		break;
 	}
@@ -112,7 +114,7 @@ static int __init setup_bcm1250(void)
 			pass_str = "A0-A6";
 			war_pass = K_SYS_REVISION_BCM1250_PASS2;
 		} else {
-			prom_printf("Unknown BCM1250 rev %x\n", soc_pass);
+			printk("Unknown BCM1250 rev %x\n", soc_pass);
 			ret = 1;
 		}
 		break;
@@ -139,8 +141,20 @@ static int __init setup_bcm112x(void)
 		periph_rev = 3;
 		pass_str = "A2";
 		break;
+	case K_SYS_REVISION_BCM112x_A3:
+		periph_rev = 3;
+		pass_str = "A3";
+		break;
+	case K_SYS_REVISION_BCM112x_A4:
+		periph_rev = 3;
+		pass_str = "A4";
+		break;
+	case K_SYS_REVISION_BCM112x_B0:
+		periph_rev = 3;
+		pass_str = "B0";
+		break;
 	default:
-		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+		printk("Unknown %s rev %x\n", soc_str, soc_pass);
 		ret = 1;
 	}
 	return ret;
@@ -158,21 +172,21 @@ void __init sb1250_setup(void)
 	soc_pass = G_SYS_REVISION(sys_rev);
 
 	if (sys_rev_decode()) {
-		prom_printf("Restart after failure to identify SiByte chip\n");
+		printk("Restart after failure to identify SiByte chip\n");
 		machine_restart(NULL);
 	}
 
 	plldiv = G_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
 	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
 
-	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
+	printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
 		    soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
-	prom_printf("Board type: %s\n", get_system_type());
+	printk("Board type: %s\n", get_system_type());
 
 	switch (war_pass) {
 	case K_SYS_REVISION_BCM1250_PASS1:
 #ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
-		prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
+		printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
 		            "and the kernel doesn't have the proper "
 		            "workarounds compiled in. @@@@\n");
 		bad_config = 1;
@@ -182,27 +196,27 @@ void __init sb1250_setup(void)
 		/* Pass 2 - easiest as default for now - so many numbers */
 #if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || \
     !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
-		prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the "
+		printk("@@@@ This is a BCM1250 A3-A10 board, and the "
 		            "kernel doesn't have the proper workarounds "
 		            "compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 #ifdef CONFIG_CPU_HAS_PREFETCH
-		prom_printf("@@@@ Prefetches may be enabled in this kernel, "
+		printk("@@@@ Prefetches may be enabled in this kernel, "
 		            "but are buggy on this board.  @@@@\n");
 		bad_config = 1;
 #endif
 		break;
 	case K_SYS_REVISION_BCM1250_PASS2_2:
 #ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
-		prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the "
+		printk("@@@@ This is a BCM1250 B1/B2. board, and the "
 		            "kernel doesn't have the proper workarounds "
 		            "compiled in. @@@@\n");
 		bad_config = 1;
 #endif
 #if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || \
     !defined(CONFIG_CPU_HAS_PREFETCH)
-		prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is "
+		printk("@@@@ This is a BCM1250 B1/B2, but the kernel is "
 		            "conservatively configured for an 'A' stepping. "
 		            "@@@@\n");
 #endif
@@ -211,7 +225,7 @@ void __init sb1250_setup(void)
 		break;
 	}
 	if (bad_config) {
-		prom_printf("Invalid configuration for this chip.\n");
+		printk("Invalid configuration for this chip.\n");
 		machine_restart(NULL);
 	}
 }
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index defa1f1452ad..83572d8f3e14 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -169,17 +169,19 @@ void __init plat_mem_setup(void)
 #define LEDS_PHYS MLEDS_PHYS
 #endif
 
-#define setled(index, c) \
-  ((unsigned char *)(IOADDR(LEDS_PHYS)+0x20))[(3-(index))<<3] = (c)
 void setleds(char *str)
 {
+	void *reg;
 	int i;
+
 	for (i = 0; i < 4; i++) {
-		if (!str[i]) {
-			setled(i, ' ');
-		} else {
-			setled(i, str[i]);
-		}
+		reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3);
+
+		if (!str[i])
+			writeb(' ', reg);
+		else
+			writeb(str[i], reg);
 	}
 }
-#endif
+
+#endif /* LEDS_PHYS */
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index a5eb0adb87c7..e5777b7e2bc9 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -2,7 +2,5 @@
 # Makefile for the SNI specific part of the kernel
 #
 
-obj-y	 	+= irq.o pcimt_scache.o reset.o setup.o
+obj-y += irq.o reset.o setup.o ds1216.o a20r.o rm200.o pcimt.o pcit.o time.o
 obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
new file mode 100644
index 000000000000..31ab80f1befa
--- /dev/null
+++ b/arch/mips/sni/a20r.c
@@ -0,0 +1,227 @@
+/*
+ * A20R specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/ds1216.h>
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port a20r_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device a20r_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= a20r_data,
+	},
+};
+
+static struct resource snirm_82596_rsrc[] = {
+	{
+		.start = 0xb8000000,
+		.end   = 0xb8000004,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xb8010000,
+		.end   = 0xb8010004,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xbff00000,
+		.end   = 0xbff00020,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 22,
+		.end   = 22,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.flags = 0x01                /* 16bit mpu port access */
+	}
+};
+
+static struct platform_device snirm_82596_pdev = {
+	.name           = "snirm_82596",
+	.num_resources  = ARRAY_SIZE(snirm_82596_rsrc),
+	.resource       = snirm_82596_rsrc
+};
+
+static struct resource snirm_53c710_rsrc[] = {
+	{
+		.start = 0xb9000000,
+		.end   = 0xb90fffff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 19,
+		.end   = 19,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device snirm_53c710_pdev = {
+	.name           = "snirm_53c710",
+	.num_resources  = ARRAY_SIZE(snirm_53c710_rsrc),
+	.resource       = snirm_53c710_rsrc
+};
+
+static struct resource sc26xx_rsrc[] = {
+	{
+		.start = 0xbc070000,
+		.end   = 0xbc0700ff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 20,
+		.end   = 20,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device sc26xx_pdev = {
+	.name           = "SC26xx",
+	.num_resources  = ARRAY_SIZE(sc26xx_rsrc),
+	.resource       = sc26xx_rsrc
+};
+
+static u32 a20r_ack_hwint(void)
+{
+	u32 status = read_c0_status();
+
+	write_c0_status (status | 0x00010000);
+	asm volatile(
+	"	.set	push			\n"
+	"	.set	noat			\n"
+	"	.set	noreorder		\n"
+	"	lw	$1, 0(%0)		\n"
+	"	sb	$0, 0(%1)		\n"
+	"	sync				\n"
+	"	lb	%1, 0(%1)		\n"
+	"	b	1f			\n"
+	"	ori	%1, $1, 2		\n"
+	"	.align	8			\n"
+	"1:					\n"
+	"	nop				\n"
+	"	sw	%1, 0(%0)		\n"
+	"	sync				\n"
+	"	li	%1, 0x20		\n"
+	"2:					\n"
+	"	nop				\n"
+	"	bnez	%1,2b			\n"
+	"	addiu	%1, -1			\n"
+	"	sw	$1, 0(%0)		\n"
+	"	sync				\n"
+		".set   pop			\n"
+	:
+	: "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
+	write_c0_status(status);
+
+	return status;
+}
+
+static inline void unmask_a20r_irq(unsigned int irq)
+{
+	set_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
+	irq_enable_hazard();
+}
+
+static inline void mask_a20r_irq(unsigned int irq)
+{
+	clear_c0_status(0x100 << (irq - SNI_A20R_IRQ_BASE));
+	irq_disable_hazard();
+}
+
+static void end_a20r_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		a20r_ack_hwint();
+		unmask_a20r_irq(irq);
+	}
+}
+
+static struct irq_chip a20r_irq_type = {
+	.typename	= "A20R",
+	.ack		= mask_a20r_irq,
+	.mask		= mask_a20r_irq,
+	.mask_ack	= mask_a20r_irq,
+	.unmask		= unmask_a20r_irq,
+	.end		= end_a20r_irq,
+};
+
+/*
+ * hwint 0 receive all interrupts
+ */
+static void a20r_hwint(void)
+{
+	u32 cause, status;
+	int irq;
+
+	clear_c0_status (IE_IRQ0);
+	status = a20r_ack_hwint();
+	cause = read_c0_cause();
+
+	irq = ffs(((cause & status) >> 8) & 0xf8);
+	if (likely(irq > 0))
+		do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
+	set_c0_status(IE_IRQ0);
+}
+
+void __init sni_a20r_irq_init(void)
+{
+	int i;
+
+	for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
+		set_irq_chip(i, &a20r_irq_type);
+	sni_hwint = a20r_hwint;
+	change_c0_status(ST0_IM, IE_IRQ0);
+	setup_irq (SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
+}
+
+void sni_a20r_init(void)
+{
+	ds1216_base = (volatile unsigned char *) SNI_DS1216_A20R_BASE;
+	rtc_mips_get_time = ds1216_get_cmos_time;
+}
+
+static int __init snirm_a20r_setup_devinit(void)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        platform_device_register(&snirm_82596_pdev);
+	        platform_device_register(&snirm_53c710_pdev);
+	        platform_device_register(&sc26xx_pdev);
+	        platform_device_register(&a20r_serial8250_device);
+	        break;
+	}
+
+	return 0;
+}
+
+device_initcall(snirm_a20r_setup_devinit);
diff --git a/arch/mips/sni/ds1216.c b/arch/mips/sni/ds1216.c
new file mode 100644
index 000000000000..1d92732c14f1
--- /dev/null
+++ b/arch/mips/sni/ds1216.c
@@ -0,0 +1,81 @@
+
+#include <linux/bcd.h>
+#include <linux/time.h>
+
+#include <asm/ds1216.h>
+
+volatile unsigned char *ds1216_base;
+
+/*
+ * Read the 64 bit we'd like to have - It a series
+ * of 64 bits showing up in the LSB of the base register.
+ *
+ */
+static unsigned char *ds1216_read(void)
+{
+	static unsigned char	rdbuf[8];
+	unsigned char		c;
+	int			i, j;
+
+	for (i = 0; i < 8; i++) {
+		c = 0x0;
+		for (j = 0; j < 8; j++) {
+			c |= (*ds1216_base & 0x1) << j;
+		}
+		rdbuf[i] = c;
+	}
+
+	return rdbuf;
+}
+
+static void ds1216_switch_ds_to_clock(void)
+{
+	unsigned char magic[] = {
+		0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
+	};
+	int i,j,c;
+
+	/* Reset magic pointer */
+	c = *ds1216_base;
+
+	/* Write 64 bit magic to DS1216 */
+	for (i = 0; i < 8; i++) {
+		c = magic[i];
+		for (j = 0; j < 8; j++) {
+			*ds1216_base = c;
+			c = c >> 1;
+		}
+	}
+}
+
+unsigned long ds1216_get_cmos_time(void)
+{
+	unsigned char	*rdbuf;
+	unsigned int	year, month, date, hour, min, sec;
+
+	ds1216_switch_ds_to_clock();
+	rdbuf = ds1216_read();
+
+	sec = BCD2BIN(DS1216_SEC(rdbuf));
+	min = BCD2BIN(DS1216_MIN(rdbuf));
+	hour = BCD2BIN(DS1216_HOUR(rdbuf));
+	date = BCD2BIN(DS1216_DATE(rdbuf));
+	month = BCD2BIN(DS1216_MONTH(rdbuf));
+	year = BCD2BIN(DS1216_YEAR(rdbuf));
+
+	if (DS1216_1224(rdbuf) && DS1216_AMPM(rdbuf))
+		hour+=12;
+
+	if (year < 70)
+		year += 2000;
+	else
+		year += 1900;
+
+	return mktime(year, month, date, hour, min, sec);
+}
+
+int ds1216_set_rtc_mmss(unsigned long nowtime)
+{
+	printk("ds1216_set_rtc_mmss called but not implemented\n");
+	return -1;
+}
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 039e8e540508..ad5fc471a004 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -5,6 +5,7 @@
  *
  * Copyright (C) 1992 Linus Torvalds
  * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer
  */
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -15,152 +16,34 @@
 #include <asm/i8259.h>
 #include <asm/io.h>
 #include <asm/sni.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
 
-static void enable_pciasic_irq(unsigned int irq)
-{
-	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
-
-	*(volatile u8 *) PCIMT_IRQSEL |= mask;
-}
-
-void disable_pciasic_irq(unsigned int irq)
-{
-	unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
-
-	*(volatile u8 *) PCIMT_IRQSEL &= mask;
-}
+void (*sni_hwint)(void);
 
-static void end_pciasic_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_pciasic_irq(irq);
-}
-
-static struct irq_chip pciasic_irq_type = {
-	.name = "ASIC-PCI",
-	.ack = disable_pciasic_irq,
-	.mask = disable_pciasic_irq,
-	.mask_ack = disable_pciasic_irq,
-	.unmask = enable_pciasic_irq,
-	.end = end_pciasic_irq,
-};
-
-/*
- * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
- * button interrupts.  Later ...
- */
-static void pciasic_hwint0(void)
-{
-	panic("Received int0 but no handler yet ...");
-}
-
-/* This interrupt was used for the com1 console on the first prototypes.  */
-static void pciasic_hwint2(void)
-{
-	/* I think this shouldn't happen on production machines.  */
-	panic("hwint2 and no handler yet");
-}
-
-/* hwint5 is the r4k count / compare interrupt  */
-static void pciasic_hwint5(void)
-{
-	panic("hwint5 and no handler yet");
-}
-
-static unsigned int ls1bit8(unsigned int x)
-{
-	int b = 7, s;
-
-	s = 4; if ((x & 0x0f) == 0) s = 0; b -= s; x <<= s;
-	s = 2; if ((x & 0x30) == 0) s = 0; b -= s; x <<= s;
-	s = 1; if ((x & 0x40) == 0) s = 0; b -= s;
-
-	return b;
-}
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts,
- *
- * The EISA_INT bit in CSITPEND is high active, all others are low active.
- */
-static void pciasic_hwint1(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	u8 pend = *(volatile char *)PCIMT_CSITPEND;
-	unsigned long flags;
-
-	if (pend & IT_EISA) {
-		int irq;
-		/*
-		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
-		 * broken.  Using it may result in loss of some or all i8259
-		 * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
-		 */
-		irq = i8259_irq();
-		if (unlikely(irq < 0))
-			return;
-
-		do_IRQ(irq);
-	}
-
-	if (!(pend & IT_SCSI)) {
-		flags = read_c0_status();
-		clear_c0_status(ST0_IM);
-		do_IRQ(PCIMT_IRQ_SCSI);
-		write_c0_status(flags);
-	}
+	sni_hwint();
 }
 
-/*
- * hwint 3 should deal with the PCI A - D interrupts,
- */
-static void pciasic_hwint3(void)
+/* ISA irq handler */
+static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
 {
-	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	int irq;
 
-	pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
-	clear_c0_status(IE_IRQ3);
-	irq = PCIMT_IRQ_INT2 + ls1bit8(pend);
-	do_IRQ(irq);
-	set_c0_status(IE_IRQ3);
-}
+	irq = i8259_irq();
+	if (unlikely(irq < 0))
+		return IRQ_NONE;
 
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-static void pciasic_hwint4(void)
-{
-	clear_c0_status(IE_IRQ4);
-	do_IRQ(PCIMT_IRQ_ETHERNET);
-	set_c0_status(IE_IRQ4);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause();
-	static unsigned char led_cache;
-
-	*(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
-
-	if (pending & 0x0800)
-		pciasic_hwint1();
-	else if (pending & 0x4000)
-		pciasic_hwint4();
-	else if (pending & 0x2000)
-		pciasic_hwint3();
-	else if (pending & 0x1000)
-		pciasic_hwint2();
-	else if (pending & 0x8000)
-		pciasic_hwint5();
-	else if (pending & 0x0400)
-		pciasic_hwint0();
+	do_IRQ(irq);
+	return IRQ_HANDLED;
 }
 
-void __init init_pciasic(void)
-{
-	* (volatile u8 *) PCIMT_IRQSEL =
-		IT_EISA | IT_INTA | IT_INTB | IT_INTC | IT_INTD;
-}
+struct irqaction sni_isa_irq = {
+	.handler = sni_isa_irq_handler,
+	.name = "ISA",
+	.flags = SA_SHIRQ
+};
 
 /*
  * On systems with i8259-style interrupt controllers we assume for
@@ -169,14 +52,31 @@ void __init init_pciasic(void)
  */
 void __init arch_init_irq(void)
 {
-	int i;
-
 	init_i8259_irqs();			/* Integrated i8259  */
-	init_pciasic();
-
-	/* Actually we've got more interrupts to handle ...  */
-	for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++)
-		set_irq_chip(i, &pciasic_irq_type);
-
-	change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ2|IE_IRQ3|IE_IRQ4);
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	        sni_pcit_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        sni_pcit_cplus_irq_init();
+	        break;
+
+	case SNI_BRD_RM200:
+	        sni_rm200_irq_init();
+	        break;
+
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_pcimt_irq_init();
+	        break;
+	}
 }
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
new file mode 100644
index 000000000000..9ee208daa8b1
--- /dev/null
+++ b/arch/mips/sni/pcimt.c
@@ -0,0 +1,305 @@
+/*
+ * PCIMT specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mc146818-time.h>
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
+
+#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
+#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
+
+static void __init sni_pcimt_sc_init(void)
+{
+	unsigned int scsiz, sc_size;
+
+	scsiz = cacheconf & 7;
+	if (scsiz == 0) {
+		printk("Second level cache is deactived.\n");
+		return;
+	}
+	if (scsiz >= 6) {
+		printk("Invalid second level cache size configured, "
+		       "deactivating second level cache.\n");
+		cacheconf = 0;
+		return;
+	}
+
+	sc_size = 128 << scsiz;
+	printk("%dkb second level cache detected, deactivating.\n", sc_size);
+	cacheconf = 0;
+}
+
+
+/*
+ * A bit more gossip about the iron we're running on ...
+ */
+static inline void sni_pcimt_detect(void)
+{
+	char boardtype[80];
+	unsigned char csmsr;
+	char *p = boardtype;
+	unsigned int asic;
+
+	csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
+
+	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
+	if ((csmsr & 0x80) == 0)
+		p += sprintf(p, ", board revision %s",
+		             (csmsr & 0x20) ? "D" : "C");
+	asic = csmsr & 0x80;
+	asic = (csmsr & 0x08) ? asic : !asic;
+	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
+	printk("%s.\n", boardtype);
+}
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port pcimt_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device pcimt_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pcimt_data,
+	},
+};
+
+static struct resource sni_io_resource = {
+	.start	= 0x00000000UL,
+	.end	= 0x03bfffffUL,
+	.name	= "PCIMT IO MEM",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pcimt_io_resources[] = {
+	{
+		.start	= 0x00,
+		.end	= 0x1f,
+		.name	= "dma1",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x40,
+		.end	= 0x5f,
+		.name	= "timer",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x60,
+		.end	= 0x6f,
+		.name	= "keyboard",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x80,
+		.end	= 0x8f,
+		.name	= "dma page reg",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xc0,
+		.end	= 0xdf,
+		.name	= "dma2",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xcfc,
+		.end	= 0xcff,
+		.name	= "PCI config data",
+		.flags	= IORESOURCE_BUSY
+	}
+};
+
+static struct resource sni_mem_resource = {
+	.start	= 0x18000000UL,
+	.end	= 0x1fbfffffUL,
+	.name	= "PCIMT PCI MEM",
+	.flags	= IORESOURCE_MEM
+};
+
+static void __init sni_pcimt_resource_init(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
+		request_resource(&sni_io_resource, pcimt_io_resources + i);
+}
+
+extern struct pci_ops sni_pcimt_ops;
+
+static struct pci_controller sni_controller = {
+	.pci_ops	= &sni_pcimt_ops,
+	.mem_resource	= &sni_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &sni_io_resource,
+	.io_offset	= 0x00000000UL,
+	.io_map_base    = SNI_PORT_BASE
+};
+
+static void enable_pcimt_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
+
+	*(volatile u8 *) PCIMT_IRQSEL |= mask;
+}
+
+void disable_pcimt_irq(unsigned int irq)
+{
+	unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
+
+	*(volatile u8 *) PCIMT_IRQSEL &= mask;
+}
+
+static void end_pcimt_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_pcimt_irq(irq);
+}
+
+static struct irq_chip pcimt_irq_type = {
+	.typename = "PCIMT",
+	.ack = disable_pcimt_irq,
+	.mask = disable_pcimt_irq,
+	.mask_ack = disable_pcimt_irq,
+	.unmask = enable_pcimt_irq,
+	.end = end_pcimt_irq,
+};
+
+/*
+ * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
+ * button interrupts.  Later ...
+ */
+static void pcimt_hwint0(void)
+{
+	panic("Received int0 but no handler yet ...");
+}
+
+/*
+ * hwint 1 deals with EISA and SCSI interrupts,
+ *
+ * The EISA_INT bit in CSITPEND is high active, all others are low active.
+ */
+static void pcimt_hwint1(void)
+{
+	u8 pend = *(volatile char *)PCIMT_CSITPEND;
+	unsigned long flags;
+
+	if (pend & IT_EISA) {
+		int irq;
+		/*
+		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
+		 * broken.  Using it may result in loss of some or all i8259
+		 * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+		 */
+		irq = i8259_irq();
+		if (unlikely(irq < 0))
+			return;
+
+		do_IRQ(irq);
+	}
+
+	if (!(pend & IT_SCSI)) {
+		flags = read_c0_status();
+		clear_c0_status(ST0_IM);
+		do_IRQ(PCIMT_IRQ_SCSI);
+		write_c0_status(flags);
+	}
+}
+
+/*
+ * hwint 3 should deal with the PCI A - D interrupts,
+ */
+static void pcimt_hwint3(void)
+{
+	u8 pend = *(volatile char *)PCIMT_CSITPEND;
+	int irq;
+
+	pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+	pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+	clear_c0_status(IE_IRQ3);
+	irq = PCIMT_IRQ_INT2 + ffs(pend) - 1;
+	do_IRQ(irq);
+	set_c0_status(IE_IRQ3);
+}
+
+static void sni_pcimt_hwint(void)
+{
+	u32 pending = read_c0_cause() & read_c0_status();
+
+	if (pending & C_IRQ5)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+	else if (pending & C_IRQ4)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 6);
+	else if (pending & C_IRQ3)
+		pcimt_hwint3();
+	else if (pending & C_IRQ1)
+		pcimt_hwint1();
+	else if (pending & C_IRQ0) {
+		pcimt_hwint0();
+	}
+}
+
+void __init sni_pcimt_irq_init(void)
+{
+	int i;
+
+	*(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA;
+	mips_cpu_irq_init();
+	/* Actually we've got more interrupts to handle ...  */
+	for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
+		set_irq_chip(i, &pcimt_irq_type);
+	sni_hwint = sni_pcimt_hwint;
+	change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
+}
+
+void sni_pcimt_init(void)
+{
+	sni_pcimt_detect();
+	sni_pcimt_sc_init();
+	rtc_mips_get_time = mc146818_get_cmos_time;
+	rtc_mips_set_time = mc146818_set_rtc_mmss;
+	board_time_init = sni_cpu_time_init;
+	ioport_resource.end = sni_io_resource.end;
+#ifdef CONFIG_PCI
+	PCIBIOS_MIN_IO = 0x9000;
+	register_pci_controller(&sni_controller);
+#endif
+	sni_pcimt_resource_init();
+}
+
+static int __init snirm_pcimt_setup_devinit(void)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        platform_device_register(&pcimt_serial8250_device);
+	        break;
+	}
+
+	return 0;
+}
+
+device_initcall(snirm_pcimt_setup_devinit);
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
new file mode 100644
index 000000000000..00d151f4d121
--- /dev/null
+++ b/arch/mips/sni/pcit.c
@@ -0,0 +1,273 @@
+/*
+ * PCI Tower specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mc146818-time.h>
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/irq_cpu.h>
+
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port pcit_data[] = {
+	PORT(0x3f8, 0),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device pcit_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pcit_data,
+	},
+};
+
+static struct plat_serial8250_port pcit_cplus_data[] = {
+	PORT(0x3f8, 0),
+	PORT(0x2f8, 3),
+	PORT(0x3e8, 4),
+	PORT(0x2e8, 3),
+	{ },
+};
+
+static struct platform_device pcit_cplus_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= pcit_cplus_data,
+	},
+};
+
+static struct resource sni_io_resource = {
+	.start	= 0x00000000UL,
+	.end	= 0x03bfffffUL,
+	.name	= "PCIT IO",
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pcit_io_resources[] = {
+	{
+		.start	= 0x00,
+		.end	= 0x1f,
+		.name	= "dma1",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x40,
+		.end	= 0x5f,
+		.name	= "timer",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x60,
+		.end	= 0x6f,
+		.name	= "keyboard",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0x80,
+		.end	= 0x8f,
+		.name	= "dma page reg",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xc0,
+		.end	= 0xdf,
+		.name	= "dma2",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xcf8,
+		.end	= 0xcfb,
+		.name	= "PCI config addr",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	=  0xcfc,
+		.end	= 0xcff,
+		.name	= "PCI config data",
+		.flags	= IORESOURCE_BUSY
+	}
+};
+
+static struct resource sni_mem_resource = {
+	.start	= 0x18000000UL,
+	.end	= 0x1fbfffffUL,
+	.name	= "PCIT PCI MEM",
+	.flags	= IORESOURCE_MEM
+};
+
+static void __init sni_pcit_resource_init(void)
+{
+	int i;
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++)
+		request_resource(&sni_io_resource, pcit_io_resources + i);
+}
+
+
+extern struct pci_ops sni_pcit_ops;
+
+static struct pci_controller sni_pcit_controller = {
+	.pci_ops	= &sni_pcit_ops,
+	.mem_resource	= &sni_mem_resource,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &sni_io_resource,
+	.io_offset	= 0x00000000UL,
+	.io_map_base    = SNI_PORT_BASE
+};
+
+static void enable_pcit_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24);
+
+	*(volatile u32 *)SNI_PCIT_INT_REG |= mask;
+}
+
+void disable_pcit_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq - SNI_PCIT_INT_START + 24);
+
+	*(volatile u32 *)SNI_PCIT_INT_REG &= ~mask;
+}
+
+void end_pcit_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_pcit_irq(irq);
+}
+
+static struct irq_chip pcit_irq_type = {
+	.typename = "PCIT",
+	.ack = disable_pcit_irq,
+	.mask = disable_pcit_irq,
+	.mask_ack = disable_pcit_irq,
+	.unmask = enable_pcit_irq,
+	.end = end_pcit_irq,
+};
+
+static void pcit_hwint1(void)
+{
+	u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG;
+	int irq;
+
+	clear_c0_status(IE_IRQ1);
+	irq = ffs((pending >> 16) & 0x7f);
+
+	if (likely(irq > 0))
+		do_IRQ (irq + SNI_PCIT_INT_START - 1);
+	set_c0_status (IE_IRQ1);
+}
+
+static void pcit_hwint0(void)
+{
+	u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG;
+	int irq;
+
+	clear_c0_status(IE_IRQ0);
+	irq = ffs((pending >> 16) & 0x3f);
+
+	if (likely(irq > 0))
+		do_IRQ (irq + SNI_PCIT_INT_START - 1);
+	set_c0_status (IE_IRQ0);
+}
+
+static void sni_pcit_hwint(void)
+{
+	u32 pending = read_c0_cause() & read_c0_status();
+
+	if (pending & C_IRQ1)
+		pcit_hwint1();
+	else if (pending & C_IRQ2)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 4);
+	else if (pending & C_IRQ3)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 5);
+	else if (pending & C_IRQ5)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+}
+
+static void sni_pcit_hwint_cplus(void)
+{
+	u32 pending = read_c0_cause() & read_c0_status();
+
+	if (pending & C_IRQ0)
+		pcit_hwint0();
+	else if (pending & C_IRQ1)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 3);
+	else if (pending & C_IRQ2)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 4);
+	else if (pending & C_IRQ3)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 5);
+	else if (pending & C_IRQ5)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+}
+
+void __init sni_pcit_irq_init(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
+		set_irq_chip(i, &pcit_irq_type);
+	*(volatile u32 *)SNI_PCIT_INT_REG = 0;
+	sni_hwint = sni_pcit_hwint;
+	change_c0_status(ST0_IM, IE_IRQ1);
+	setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq);
+}
+
+void __init sni_pcit_cplus_irq_init(void)
+{
+	int i;
+
+	mips_cpu_irq_init();
+	for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
+		set_irq_chip(i, &pcit_irq_type);
+	*(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
+	sni_hwint = sni_pcit_hwint_cplus;
+	change_c0_status(ST0_IM, IE_IRQ0);
+	setup_irq (MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
+}
+
+void sni_pcit_init(void)
+{
+	rtc_mips_get_time = mc146818_get_cmos_time;
+	rtc_mips_set_time = mc146818_set_rtc_mmss;
+	board_time_init = sni_cpu_time_init;
+	ioport_resource.end = sni_io_resource.end;
+#ifdef CONFIG_PCI
+	PCIBIOS_MIN_IO = 0x9000;
+	register_pci_controller(&sni_pcit_controller);
+#endif
+	sni_pcit_resource_init();
+}
+
+static int __init snirm_pcit_setup_devinit(void)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_PCI_TOWER:
+	        platform_device_register(&pcit_serial8250_device);
+	        break;
+
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        platform_device_register(&pcit_cplus_serial8250_device);
+	        break;
+	}
+	return 0;
+}
+
+device_initcall(snirm_pcit_setup_devinit);
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index be85bec002e1..2eada8aea682 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -13,12 +13,11 @@
  * controller to pulse the reset-line low. We try that for a while,
  * and if it doesn't work, we do some other stupid things.
  */
-static inline void
-kb_wait(void)
+static inline void kb_wait(void)
 {
 	int i;
 
-	for (i=0; i<0x10000; i++)
+	for (i = 0; i < 0x10000; i++)
 		if ((inb_p(0x64) & 0x02) == 0)
 			break;
 }
@@ -32,9 +31,9 @@ void sni_machine_restart(char *command)
 	   We can do that easier ...  */
 	local_irq_disable();
 	for (;;) {
-		for (i=0; i<100; i++) {
+		for (i = 0; i < 100; i++) {
 			kb_wait();
-			for(j = 0; j < 100000 ; j++)
+			for (j = 0; j < 100000 ; j++)
 				/* nothing */;
 			outb_p(0xfe,0x64);	 /* pulse reset low */
 		}
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
new file mode 100644
index 000000000000..b82ff129f5ea
--- /dev/null
+++ b/arch/mips/sni/rm200.c
@@ -0,0 +1,186 @@
+/*
+ * RM200 specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/ds1216.h>
+#include <asm/irq_cpu.h>
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port rm200_data[] = {
+	PORT(0x3f8, 4),
+	PORT(0x2f8, 3),
+	{ },
+};
+
+static struct platform_device rm200_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= rm200_data,
+	},
+};
+
+static struct resource snirm_82596_rm200_rsrc[] = {
+	{
+		.start = 0xb8000000,
+		.end   = 0xb80fffff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xbb000000,
+		.end   = 0xbb000004,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 0xbff00000,
+		.end   = 0xbff00020,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 27,
+		.end   = 27,
+		.flags = IORESOURCE_IRQ
+	},
+	{
+		.flags = 0x00
+	}
+};
+
+static struct platform_device snirm_82596_rm200_pdev = {
+	.name           = "snirm_82596",
+	.num_resources  = ARRAY_SIZE(snirm_82596_rm200_rsrc),
+	.resource       = snirm_82596_rm200_rsrc
+};
+
+static struct resource snirm_53c710_rm200_rsrc[] = {
+	{
+		.start = 0xb9000000,
+		.end   = 0xb90fffff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = 26,
+		.end   = 26,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device snirm_53c710_rm200_pdev = {
+	.name           = "snirm_53c710",
+	.num_resources  = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
+	.resource       = snirm_53c710_rm200_rsrc
+};
+
+static int __init snirm_setup_devinit(void)
+{
+	if (sni_brd_type == SNI_BRD_RM200) {
+		platform_device_register(&rm200_serial8250_device);
+		platform_device_register(&snirm_82596_rm200_pdev);
+		platform_device_register(&snirm_53c710_rm200_pdev);
+	}
+	return 0;
+}
+
+device_initcall(snirm_setup_devinit);
+
+
+#define SNI_RM200_INT_STAT_REG  0xbc000000
+#define SNI_RM200_INT_ENA_REG   0xbc080000
+
+#define SNI_RM200_INT_START  24
+#define SNI_RM200_INT_END    28
+
+static void enable_rm200_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
+
+	*(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask;
+}
+
+void disable_rm200_irq(unsigned int irq)
+{
+	unsigned int mask = 1 << (irq - SNI_RM200_INT_START);
+
+	*(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask;
+}
+
+void end_rm200_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_rm200_irq(irq);
+}
+
+static struct irq_chip rm200_irq_type = {
+	.typename = "RM200",
+	.ack = disable_rm200_irq,
+	.mask = disable_rm200_irq,
+	.mask_ack = disable_rm200_irq,
+	.unmask = enable_rm200_irq,
+	.end = end_rm200_irq,
+};
+
+static void sni_rm200_hwint(void)
+{
+	u32 pending = read_c0_cause() & read_c0_status();
+	u8 mask;
+	u8 stat;
+	int irq;
+
+	if (pending & C_IRQ5)
+		do_IRQ (MIPS_CPU_IRQ_BASE + 7);
+	else if (pending & C_IRQ0) {
+		clear_c0_status (IE_IRQ0);
+		mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f;
+		stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14;
+		irq = ffs(stat & mask & 0x1f);
+
+		if (likely(irq > 0))
+			do_IRQ (irq + SNI_RM200_INT_START - 1);
+		set_c0_status (IE_IRQ0);
+	}
+}
+
+void __init sni_rm200_irq_init(void)
+{
+	int i;
+
+	* (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f;
+
+	mips_cpu_irq_init();
+	/* Actually we've got more interrupts to handle ...  */
+	for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
+		set_irq_chip(i, &rm200_irq_type);
+	sni_hwint = sni_rm200_hwint;
+	change_c0_status(ST0_IM, IE_IRQ0);
+	setup_irq (SNI_RM200_INT_START + 0, &sni_isa_irq);
+}
+
+void sni_rm200_init(void)
+{
+	set_io_port_base(SNI_PORT_BASE + 0x02000000);
+	ioport_resource.end += 0x02000000;
+	ds1216_base = (volatile unsigned char *) SNI_DS1216_RM200_BASE;
+	rtc_mips_get_time = ds1216_get_cmos_time;
+	board_time_init = sni_cpu_time_init;
+}
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index afeb7f13e5b5..68d7cf609b4f 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -6,16 +6,10 @@
  * for more details.
  *
  * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
-#include <linux/pm.h>
-#include <linux/pci.h>
 #include <linux/console.h>
 #include <linux/fb.h>
 #include <linux/screen_info.h>
@@ -25,52 +19,16 @@
 #include <asm/sgialib.h>
 #endif
 
-#include <asm/bcache.h>
-#include <asm/bootinfo.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mc146818-time.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
-#include <asm/time.h>
-#include <asm/traps.h>
+
+unsigned int sni_brd_type;
 
 extern void sni_machine_restart(char *command);
 extern void sni_machine_halt(void);
 extern void sni_machine_power_off(void);
 
-void __init plat_timer_setup(struct irqaction *irq)
-{
-	/* set the clock to 100 Hz */
-	outb_p(0x34,0x43);		/* binary, mode 2, LSB/MSB, ch 0 */
-	outb_p(LATCH & 0xff , 0x40);	/* LSB */
-	outb(LATCH >> 8 , 0x40);	/* MSB */
-	setup_irq(0, irq);
-}
-
-/*
- * A bit more gossip about the iron we're running on ...
- */
-static inline void sni_pcimt_detect(void)
-{
-	char boardtype[80];
-	unsigned char csmsr;
-	char *p = boardtype;
-	unsigned int asic;
-
-	csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
-
-	p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
-	if ((csmsr & 0x80) == 0)
-		p += sprintf(p, ", board revision %s",
-		             (csmsr & 0x20) ? "D" : "C");
-	asic = csmsr & 0x80;
-	asic = (csmsr & 0x08) ? asic : !asic;
-	p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
-	printk("%s.\n", boardtype);
-}
-
 static void __init sni_display_setup(void)
 {
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
@@ -90,175 +48,11 @@ static void __init sni_display_setup(void)
 #endif
 }
 
-static struct resource sni_io_resource = {
-	.start	= 0x00001000UL,
-	.end	= 0x03bfffffUL,
-	.name	= "PCIMT IO MEM",
-	.flags	= IORESOURCE_IO,
-};
-
-static struct resource pcimt_io_resources[] = {
-	{
-		.start	= 0x00,
-		.end	= 0x1f,
-		.name	= "dma1",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x40,
-		.end	= 0x5f,
-		.name	= "timer",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x60,
-		.end	= 0x6f,
-		.name	= "keyboard",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0x80,
-		.end	= 0x8f,
-		.name	= "dma page reg",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0xc0,
-		.end	= 0xdf,
-		.name	= "dma2",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	=  0xcfc,
-		.end	= 0xcff,
-		.name	= "PCI config data",
-		.flags	= IORESOURCE_BUSY
-	}
-};
-
-static struct resource sni_mem_resource = {
-	.start	= 0x10000000UL,
-	.end	= 0xffffffffUL,
-	.name	= "PCIMT PCI MEM",
-	.flags	= IORESOURCE_MEM
-};
-
-/*
- * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
- * for other purposes.  Be paranoid and allocate all of the before the PCI
- * code gets a chance to to map anything else there ...
- *
- * This leaves the following areas available:
- *
- * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
- * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
- * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
- * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
- * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
- */
-static struct resource pcimt_mem_resources[] = {
-	{
-		.start	= 0x100a0000,
-		.end	= 0x100bffff,
-		.name	= "Video RAM area",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x100c0000,
-		.end	= 0x100fffff,
-		.name	= "ISA Reserved",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x14000000,
-		.end	= 0x17bfffff,
-		.name	= "PCI IO",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x17c00000,
-		.end	= 0x17ffffff,
-		.name	= "Cache Replacement Area",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1a000000,
-		.end	= 0x1a000003,
-		.name	= "PCI INT Acknowledge",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fc00000,
-		.end	= 0x1fc7ffff,
-		.name	= "Boot PROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fc80000,
-		.end	= 0x1fcfffff,
-		.name	= "Diag PROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fd00000,
-		.end	= 0x1fdfffff,
-		.name	= "X-Bus",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fe00000,
-		.end	= 0x1fefffff,
-		.name	= "BIOS map",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1ff00000,
-		.end	= 0x1ff7ffff,
-		.name	= "NVRAM / EEPROM",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1fff0000,
-		.end	= 0x1fffefff,
-		.name	= "ASIC PCI",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x1ffff000,
-		.end	= 0x1fffffff,
-		.name	= "MP Agent",
-		.flags	= IORESOURCE_BUSY
-	}, {
-		.start	= 0x20000000,
-		.end	= 0x9fffffff,
-		.name	= "Main Memory",
-		.flags	= IORESOURCE_BUSY
-	}
-};
-
-static void __init sni_resource_init(void)
-{
-	int i;
-
-	/* request I/O space for devices used on all i[345]86 PCs */
-	for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
-		request_resource(&ioport_resource, pcimt_io_resources + i);
-
-	/* request mem space for pcimt-specific devices */
-	for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
-		request_resource(&sni_mem_resource, pcimt_mem_resources + i);
-
-	ioport_resource.end = sni_io_resource.end;
-}
-
-extern struct pci_ops sni_pci_ops;
-
-static struct pci_controller sni_controller = {
-	.pci_ops	= &sni_pci_ops,
-	.mem_resource	= &sni_mem_resource,
-	.mem_offset	= 0x10000000UL,
-	.io_resource	= &sni_io_resource,
-	.io_offset	= 0x00000000UL
-};
-
-static inline void sni_pcimt_time_init(void)
-{
-	rtc_mips_get_time = mc146818_get_cmos_time;
-	rtc_mips_set_time = mc146818_set_rtc_mmss;
-}
 
 void __init plat_mem_setup(void)
 {
-	sni_pcimt_detect();
-	sni_pcimt_sc_init();
-	sni_pcimt_time_init();
-
 	set_io_port_base(SNI_PORT_BASE);
-	ioport_resource.end = sni_io_resource.end;
+//	ioport_resource.end = sni_io_resource.end;
 
 	/*
 	 * Setup (E)ISA I/O memory access stuff
@@ -268,15 +62,33 @@ void __init plat_mem_setup(void)
 	EISA_bus = 1;
 #endif
 
-	sni_resource_init();
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_init();
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        sni_pcit_init();
+		break;
+
+	case SNI_BRD_RM200:
+	        sni_rm200_init();
+	        break;
+
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_pcimt_init();
+	        break;
+	}
 
 	_machine_restart = sni_machine_restart;
 	_machine_halt = sni_machine_halt;
 	pm_power_off = sni_machine_power_off;
 
 	sni_display_setup();
-
-#ifdef CONFIG_PCI
-	register_pci_controller(&sni_controller);
-#endif
 }
diff --git a/arch/mips/sni/sniprom.c b/arch/mips/sni/sniprom.c
index 1213d166f22e..643366eb854a 100644
--- a/arch/mips/sni/sniprom.c
+++ b/arch/mips/sni/sniprom.c
@@ -9,9 +9,12 @@
  * Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  */
 
+#define DEBUG
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
+#include <linux/console.h>
 
 #include <asm/addrspace.h>
 #include <asm/sni.h>
@@ -31,14 +34,13 @@
 #define PROM_ENTRY(x)		(PROM_VEC + (x))
 
 
-#undef DEBUG
-#ifdef DEBUG
-#define DBG_PRINTF(x...)     prom_printf(x)
-#else
-#define DBG_PRINTF(x...)
-#endif
-
 static int *(*__prom_putchar)(int)        = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR);
+
+void prom_putchar(char c)
+{
+	__prom_putchar(c);
+}
+
 static char *(*__prom_getenv)(char *)     = (char *(*)(char *))PROM_ENTRY(PROM_GETENV);
 static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF);
 
@@ -47,26 +49,6 @@ char *prom_getenv (char *s)
 	return __prom_getenv(s);
 }
 
-void prom_printf(char *fmt, ...)
-{
-	va_list args;
-	char ppbuf[1024];
-	char *bptr;
-
-	va_start(args, fmt);
-	vsprintf(ppbuf, fmt, args);
-
-	bptr = ppbuf;
-
-	while (*bptr != 0) {
-		if (*bptr == '\n')
-			__prom_putchar('\r');
-
-		__prom_putchar(*bptr++);
-	}
-	va_end(args);
-}
-
 void __init prom_free_prom_memory(void)
 {
 }
@@ -93,15 +75,15 @@ static void sni_idprom_dump(void)
 {
 	int	i;
 
-	prom_printf("SNI IDProm dump (first 128byte):\n");
-	for(i=0;i<128;i++) {
+	pr_debug("SNI IDProm dump:\n");
+	for (i = 0; i < 256; i++) {
 		if (i%16 == 0)
-			prom_printf("%04x ", i);
+			pr_debug("%04x ", i);
 
-		prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE+i));
+		printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
 
-		if (i%16 == 15)
-			prom_printf("\n");
+		if (i % 16 == 15)
+			printk("\n");
 	}
 }
 #endif
@@ -118,34 +100,142 @@ static void sni_mem_init(void )
 	} memconf[8];
 
 	/* MemSIZE from prom in 16MByte chunks */
-	memsize=*((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
+	memsize = *((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
 
-	DBG_PRINTF("IDProm memsize: %lu MByte\n", memsize);
+	pr_debug("IDProm memsize: %lu MByte\n", memsize);
 
 	/* get memory bank layout from prom */
 	__prom_get_memconf(&memconf);
 
-	DBG_PRINTF("prom_get_mem_conf memory configuration:\n");
-	for(i=0;i<8 && memconf[i].size;i++) {
-		prom_printf("Bank%d: %08x @ %08x\n", i,
+	pr_debug("prom_get_mem_conf memory configuration:\n");
+	for (i = 0;i < 8 && memconf[i].size; i++) {
+		if (sni_brd_type == SNI_BRD_PCI_TOWER ||
+		    sni_brd_type == SNI_BRD_PCI_TOWER_CPLUS) {
+			if (memconf[i].base >= 0x20000000 &&
+			    memconf[i].base <  0x30000000) {
+				memconf[i].base -= 0x20000000;
+			}
+	}
+		pr_debug("Bank%d: %08x @ %08x\n", i,
 			memconf[i].size, memconf[i].base);
 		add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM);
 	}
 }
 
+static void __init sni_console_setup(void)
+{
+	char *ctype;
+	char *cdev;
+	char *baud;
+	int port;
+	static char options[8];
+
+	cdev = prom_getenv ("console_dev");
+	if (strncmp (cdev, "tty", 3) == 0) {
+		ctype = prom_getenv ("console");
+		switch (*ctype) {
+		default:
+		case 'l':
+	                port = 0;
+	                baud = prom_getenv("lbaud");
+	                break;
+		case 'r':
+	                port = 1;
+	                baud = prom_getenv("rbaud");
+	                break;
+		}
+		if (baud)
+			strcpy(options, baud);
+		add_preferred_console("ttyS", port, baud ? options : NULL);
+	}
+}
+
 void __init prom_init(void)
 {
 	int argc = fw_arg0;
 	char **argv = (void *)fw_arg1;
-	unsigned int sni_brd_type = *(unsigned char *) SNI_IDPROM_BRDTYPE;
 	int i;
-
-	DBG_PRINTF("Found SNI brdtype %02x\n", sni_brd_type);
+	int cputype;
+
+	sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
+	cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE;
+	switch (sni_brd_type) {
+	case SNI_BRD_TOWER_OASIC:
+	        switch (cputype) {
+		case SNI_CPU_M8030:
+		        systype = "RM400-330";
+		        break;
+		case SNI_CPU_M8031:
+		        systype = "RM400-430";
+		        break;
+		case SNI_CPU_M8037:
+		        systype = "RM400-530";
+		        break;
+		case SNI_CPU_M8034:
+		        systype = "RM400-730";
+		        break;
+		default:
+			systype = "RM400-xxx";
+			break;
+		}
+	        break;
+	case SNI_BRD_MINITOWER:
+	        switch (cputype) {
+		case SNI_CPU_M8021:
+		case SNI_CPU_M8043:
+		        systype = "RM400-120";
+		        break;
+		case SNI_CPU_M8040:
+		        systype = "RM400-220";
+		        break;
+		case SNI_CPU_M8053:
+		        systype = "RM400-225";
+		        break;
+		case SNI_CPU_M8050:
+		        systype = "RM400-420";
+		        break;
+		default:
+			systype = "RM400-xxx";
+			break;
+		}
+	        break;
+	case SNI_BRD_PCI_TOWER:
+	        systype = "RM400-Cxx";
+	        break;
+	case SNI_BRD_RM200:
+	        systype = "RM200-xxx";
+	        break;
+	case SNI_BRD_PCI_MTOWER:
+	        systype = "RM300-Cxx";
+	        break;
+	case SNI_BRD_PCI_DESKTOP:
+	        switch (read_c0_prid() & 0xff00) {
+		case PRID_IMP_R4600:
+		case PRID_IMP_R4700:
+		        systype = "RM200-C20";
+		        break;
+		case PRID_IMP_R5000:
+		        systype = "RM200-C40";
+		        break;
+		default:
+		        systype = "RM200-Cxx";
+		        break;
+		}
+	        break;
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	        systype = "RM400-Exx";
+	        break;
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        systype = "RM300-Exx";
+	        break;
+	}
+	pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type,systype);
 
 #ifdef DEBUG
 	sni_idprom_dump();
 #endif
 	sni_mem_init();
+	sni_console_setup();
 
 	/* copy prom cmdline parameters to kernel cmdline */
 	for (i = 1; i < argc; i++) {
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
new file mode 100644
index 000000000000..20028fc7757e
--- /dev/null
+++ b/arch/mips/sni/time.c
@@ -0,0 +1,148 @@
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+
+#define SNI_CLOCK_TICK_RATE     3686400
+#define SNI_COUNTER2_DIV        64
+#define SNI_COUNTER0_DIV        ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
+
+static void sni_a20r_timer_ack(void)
+{
+        *(volatile u8 *)A20R_PT_TIM0_ACK = 0x0; wmb();
+}
+
+/*
+ * a20r platform uses 2 counters to divide the input frequency.
+ * Counter 2 output is connected to Counter 0 & 1 input.
+ */
+static void __init sni_a20r_timer_setup(struct irqaction *irq)
+{
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  0) = (SNI_COUNTER0_DIV) & 0xff; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  0) = (SNI_COUNTER0_DIV >> 8) & 0xff; wmb();
+
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = (SNI_COUNTER2_DIV) & 0xff; wmb();
+        *(volatile u8 *)(A20R_PT_CLOCK_BASE +  8) = (SNI_COUNTER2_DIV >> 8) & 0xff; wmb();
+
+        setup_irq(SNI_A20R_IRQ_TIMER, irq);
+        mips_timer_ack = sni_a20r_timer_ack;
+}
+
+#define SNI_8254_TICK_RATE        1193182UL
+
+#define SNI_8254_TCSAMP_COUNTER   ((SNI_8254_TICK_RATE / HZ) + 255)
+
+static __init unsigned long dosample(void)
+{
+	u32 ct0, ct1;
+	volatile u8 msb, lsb;
+
+	/* Start the counter. */
+	outb_p (0x34, 0x43);
+	outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
+	outb (SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
+
+	/* Get initial counter invariant */
+	ct0 = read_c0_count();
+
+	/* Latch and spin until top byte of counter0 is zero */
+	do {
+		outb (0x00, 0x43);
+		lsb = inb (0x40);
+		msb = inb (0x40);
+		ct1 = read_c0_count();
+	} while (msb);
+
+	/* Stop the counter. */
+	outb (0x38, 0x43);
+	/*
+	 * Return the difference, this is how far the r4k counter increments
+	 * for every 1/HZ seconds. We round off the nearest 1 MHz of master
+	 * clock (= 1000000 / HZ / 2).
+	 */
+	/*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
+	return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
+}
+
+/*
+ * Here we need to calibrate the cycle counter to at least be close.
+ */
+__init void sni_cpu_time_init(void)
+{
+	unsigned long r4k_ticks[3];
+	unsigned long r4k_tick;
+
+	/*
+	 * Figure out the r4k offset, the algorithm is very simple and works in
+	 * _all_ cases as long as the 8254 counter register itself works ok (as
+	 * an interrupt driving timer it does not because of bug, this is why
+	 * we are using the onchip r4k counter/compare register to serve this
+	 * purpose, but for r4k_offset calculation it will work ok for us).
+	 * There are other very complicated ways of performing this calculation
+	 * but this one works just fine so I am not going to futz around. ;-)
+	 */
+	printk(KERN_INFO "Calibrating system timer... ");
+	dosample();	/* Prime cache. */
+	dosample();	/* Prime cache. */
+	/* Zero is NOT an option. */
+	do {
+		r4k_ticks[0] = dosample();
+	} while (!r4k_ticks[0]);
+	do {
+		r4k_ticks[1] = dosample();
+	} while (!r4k_ticks[1]);
+
+	if (r4k_ticks[0] != r4k_ticks[1]) {
+		printk("warning: timer counts differ, retrying... ");
+		r4k_ticks[2] = dosample();
+		if (r4k_ticks[2] == r4k_ticks[0]
+		    || r4k_ticks[2] == r4k_ticks[1])
+			r4k_tick = r4k_ticks[2];
+		else {
+			printk("disagreement, using average... ");
+			r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
+				   + r4k_ticks[2]) / 3;
+		}
+	} else
+		r4k_tick = r4k_ticks[0];
+
+	printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
+		(int) (r4k_tick / (500000 / HZ)),
+		(int) (r4k_tick % (500000 / HZ)));
+
+	mips_hpt_frequency = r4k_tick * HZ;
+}
+
+/*
+ * R4k counter based timer interrupt. Works on RM200-225 and possibly
+ * others but not on RM400
+ */
+static void __init sni_cpu_timer_setup(struct irqaction *irq)
+{
+        setup_irq(SNI_MIPS_IRQ_CPU_TIMER, irq);
+}
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	switch (sni_brd_type) {
+	case SNI_BRD_10:
+	case SNI_BRD_10NEW:
+	case SNI_BRD_TOWER_OASIC:
+	case SNI_BRD_MINITOWER:
+	        sni_a20r_timer_setup (irq);
+	        break;
+
+	case SNI_BRD_PCI_TOWER:
+	case SNI_BRD_RM200:
+	case SNI_BRD_PCI_MTOWER:
+	case SNI_BRD_PCI_DESKTOP:
+	case SNI_BRD_PCI_TOWER_CPLUS:
+	case SNI_BRD_PCI_MTOWER_CPLUS:
+	        sni_cpu_timer_setup (irq);
+	        break;
+	}
+}
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c
index e7f3e5b84dcf..3d25d010f3d5 100644
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ b/arch/mips/tx4927/common/tx4927_irq.c
@@ -416,7 +416,7 @@ static int tx4927_irq_nested(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)			/* cpu timer */
 		do_IRQ(TX4927_IRQ_CPU_TIMER);
diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c
index 941c441729b0..c8e49feb345b 100644
--- a/arch/mips/tx4927/common/tx4927_setup.c
+++ b/arch/mips/tx4927/common/tx4927_setup.c
@@ -81,18 +81,8 @@ void __init tx4927_time_init(void)
 
 void __init plat_timer_setup(struct irqaction *irq)
 {
-	u32 count;
-	u32 c1;
-	u32 c2;
-
 	setup_irq(TX4927_IRQ_CPU_TIMER, irq);
 
-	/* to generate the first timer interrupt */
-	c1 = read_c0_count();
-	count = c1 + (mips_hpt_frequency / HZ);
-	write_c0_compare(count);
-	c2 = read_c0_count();
-
 #ifdef CONFIG_TOSHIBA_RBTX4927
 	{
 		extern void toshiba_rbtx4927_timer_setup(struct irqaction
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
index c1a377a80a5d..8a991f3c1a6f 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile
+++ b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
@@ -1,5 +1,3 @@
 obj-y	+= toshiba_rbtx4927_prom.o
 obj-y	+= toshiba_rbtx4927_setup.o
 obj-y	+= toshiba_rbtx4927_irq.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
index dcce88f403c9..5cc30c10e746 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
@@ -132,9 +132,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
 #include <asm/wbflush.h>
 #include <linux/bootmem.h>
 #include <linux/blkdev.h>
-#ifdef CONFIG_RTC_DS1742
-#include <linux/ds1742rtc.h>
-#endif
 #ifdef CONFIG_TOSHIBA_FPCIB0
 #include <asm/tx4927/smsc_fdc37m81x.h>
 #endif
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index 7316a78fdd68..0f7576dfd141 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -53,6 +53,7 @@
 #include <linux/pci.h>
 #include <linux/timex.h>
 #include <linux/pm.h>
+#include <linux/platform_device.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
@@ -64,9 +65,6 @@
 #include <asm/time.h>
 #include <linux/bootmem.h>
 #include <linux/blkdev.h>
-#ifdef CONFIG_RTC_DS1742
-#include <linux/ds1742rtc.h>
-#endif
 #ifdef CONFIG_TOSHIBA_FPCIB0
 #include <asm/tx4927/smsc_fdc37m81x.h>
 #endif
@@ -1020,69 +1018,12 @@ void __init toshiba_rbtx4927_setup(void)
 			       "+\n");
 }
 
-#ifdef CONFIG_RTC_DS1742
-extern unsigned long rtc_ds1742_get_time(void);
-extern int rtc_ds1742_set_time(unsigned long);
-extern void rtc_ds1742_wait(void);
-#endif
-
 void __init
 toshiba_rbtx4927_time_init(void)
 {
-	u32 c1;
-	u32 c2;
-
 	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "-\n");
 
-#ifdef CONFIG_RTC_DS1742
-
-	rtc_mips_get_time = rtc_ds1742_get_time;
-	rtc_mips_set_time = rtc_ds1742_set_time;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":rtc_ds1742_init()-\n");
-	rtc_ds1742_init(0xbc010000);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":rtc_ds1742_init()+\n");
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":Calibrate mips_hpt_frequency-\n");
-	rtc_ds1742_wait();
-
-	/* get the count */
-	c1 = read_c0_count();
-
-	/* wait for the seconds to change again */
-	rtc_ds1742_wait();
-
-	/* get the count again */
-	c2 = read_c0_count();
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":Calibrate mips_hpt_frequency+\n");
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":c1=%12u\n", c1);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":c2=%12u\n", c2);
-
-	/* this diff is as close as we are going to get to counter ticks per sec */
-	mips_hpt_frequency = abs(c2 - c1);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":f1=%12u\n", mips_hpt_frequency);
-
-	/* round to 1/10th of a MHz */
-	mips_hpt_frequency /= (100 * 1000);
-	mips_hpt_frequency *= (100 * 1000);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT,
-				       ":f2=%12u\n", mips_hpt_frequency);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_INFO,
-				       ":mips_hpt_frequency=%uHz (%uMHz)\n",
-				       mips_hpt_frequency,
-				       mips_hpt_frequency / 1000000);
-#else
-	mips_hpt_frequency = 100000000;
-#endif
+	mips_hpt_frequency = tx4927_cpu_clock / 2;
 
 	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIME_INIT, "+\n");
 
@@ -1095,3 +1036,16 @@ void __init toshiba_rbtx4927_timer_setup(struct irqaction *irq)
 	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_TIMER_SETUP,
 				       "+\n");
 }
+
+static int __init toshiba_rbtx4927_rtc_init(void)
+{
+	struct resource res = {
+		.start	= 0x1c010000,
+		.end	= 0x1c010000 + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	struct platform_device *dev =
+		platform_device_register_simple("ds1742", -1, &res, 1);
+	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+}
+device_initcall(toshiba_rbtx4927_rtc_init);
diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c
index dc87d92bb08d..142abf453e40 100644
--- a/arch/mips/tx4938/common/setup.c
+++ b/arch/mips/tx4938/common/setup.c
@@ -55,14 +55,5 @@ tx4938_time_init(void)
 
 void __init plat_timer_setup(struct irqaction *irq)
 {
-	u32 count;
-	u32 c1;
-	u32 c2;
-
 	setup_irq(TX4938_IRQ_CPU_TIMER, irq);
-
-	c1 = read_c0_count();
-	count = c1 + (mips_hpt_frequency / HZ);
-	write_c0_compare(count);
-	c2 = read_c0_count();
 }
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 92f41f6f934a..8f4d3e74c230 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -1,6 +1,10 @@
-config CASIO_E55
-	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
+choice
+	prompt "Machine type"
 	depends on MACH_VR41XX
+	default TANBAC_TB022X
+
+config CASIO_E55
+	bool "CASIO CASSIOPEIA E-10/15/55/65"
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select ISA
@@ -8,8 +12,7 @@ config CASIO_E55
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config IBM_WORKPAD
-	bool "Support for IBM WorkPad z50"
-	depends on MACH_VR41XX
+	bool "IBM WorkPad z50"
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select ISA
@@ -17,26 +20,18 @@ config IBM_WORKPAD
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config NEC_CMBVR4133
-	bool "Support for NEC CMB-VR4133"
-	depends on MACH_VR41XX
+	bool "NEC CMB-VR4133"
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ROCKHOPPER
-	bool "Support for Rockhopper baseboard"
-	depends on NEC_CMBVR4133
-	select I8259
-	select HAVE_STD_PC_SERIAL_PORT
-
 config TANBAC_TB022X
-	bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
-	depends on MACH_VR41XX
+	bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
 	select DMA_NONCOHERENT
-	select HW_HAS_PCI
 	select IRQ_CPU
+	select HW_HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -46,40 +41,65 @@ config TANBAC_TB022X
 	  Please refer to <http://www.tanbac.co.jp/>
 	  about VR4131 multichip module and VR4131DIMM.
 
-config TANBAC_TB0226
-	bool "Support for TANBAC Mbase(TB0226)"
+config VICTOR_MPC30X
+	bool "Victor MP-C303/304"
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select HW_HAS_PCI
+	select PCI_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+config ZAO_CAPCELLA
+	bool "ZAO Networks Capcella"
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select HW_HAS_PCI
+	select PCI_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+
+endchoice
+
+config ROCKHOPPER
+	bool "Support for Rockhopper base board"
+	depends on NEC_CMBVR4133
+	select PCI_VR41XX
+	select I8259
+	select HAVE_STD_PC_SERIAL_PORT
+
+choice
+	prompt "Base board type"
 	depends on TANBAC_TB022X
+	default TANBAC_TB0287
+
+config TANBAC_TB0219
+	bool "TANBAC DIMM Evaluation Kit(TB0219)"
 	select GPIO_VR41XX
+	select PCI_VR41XX
+	help
+	  The TANBAC DIMM Evaluation Kit(TB0219) is a MIPS-based platform
+	  manufactured by TANBAC.
+	  Please refer to <http://www.tanbac.co.jp/> about DIMM Evaluation Kit.
+
+config TANBAC_TB0226
+	bool "TANBAC Mbase(TB0226)"
+	select GPIO_VR41XX
+	select PCI_VR41XX
 	help
 	  The TANBAC Mbase(TB0226) is a MIPS-based platform
 	  manufactured by TANBAC.
 	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
 
 config TANBAC_TB0287
-	bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
-	depends on TANBAC_TB022X
+	bool "TANBAC Mini-ITX DIMM base(TB0287)"
+	select PCI_VR41XX
 	help
 	  The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform
 	  manufactured by TANBAC.
 	  Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
 
-config VICTOR_MPC30X
-	bool "Support for Victor MP-C303/304"
-	depends on MACH_VR41XX
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config ZAO_CAPCELLA
-	bool "Support for ZAO Networks Capcella"
-	depends on MACH_VR41XX
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
+endchoice
 
 config PCI_VR41XX
 	bool "Add PCI control unit support of NEC VR4100 series"
diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile
index 975d5caf9d1b..f842783acd86 100644
--- a/arch/mips/vr41xx/common/Makefile
+++ b/arch/mips/vr41xx/common/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	+= bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
-
-EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 28da4e71c443..3d73545e8c48 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -37,6 +37,11 @@ config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
 
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -45,6 +50,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config GENERIC_TIME
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	depends on SMP
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 9b7e42490dd1..760567a9ba16 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -35,12 +35,8 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
 
 OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
 
-GCC_VERSION     := $(call cc-version)
-ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
-$(error Sorry, couldn't find ($(cc-version)).)
-endif
-ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
-$(error Sorry, your compiler is too old ($(GCC_VERSION)).  GCC v3.3 or above is required.)
+ifneq ($(call cc-ifversion, -lt, 0303, "bad"),)
+$(error Sorry, GCC v3.3 or above is required.)
 endif
 
 cflags-y	:= -pipe
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 782906b644dd..eb2f9a3d515c 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -435,7 +435,6 @@ CONFIG_SCSI_SATA_SIL=m
 # CONFIG_SCSI_SATA_ULI is not set
 CONFIG_SCSI_SATA_VIA=m
 # CONFIG_SCSI_SATA_VITESSE is not set
-CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
diff --git a/arch/parisc/hpux/entry_hpux.S b/arch/parisc/hpux/entry_hpux.S
index 31c8cccfba31..d15a413572f0 100644
--- a/arch/parisc/hpux/entry_hpux.S
+++ b/arch/parisc/hpux/entry_hpux.S
@@ -18,17 +18,16 @@
  *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <asm/unistd.h>
+#include <asm/assembly.h>
 #include <linux/sys.h>
 #include <linux/linkage.h>
-#include <asm/unistd.h>
 
-#define ENTRY_NAME(_name_) .word _name_
+#define ENTRY_NAME(_name_) ASM_ULONG_INSN _name_
 
 	.section .rodata,"a"
-	.align 4
-	.export hpux_call_table
 	.import hpux_unimplemented_wrapper
-hpux_call_table:
+ENTRY(hpux_call_table)
 	ENTRY_NAME(sys_ni_syscall)	/* 0 */
 	ENTRY_NAME(sys_exit)
 	ENTRY_NAME(hpux_fork_wrapper)
@@ -542,5 +541,6 @@ hpux_call_table:
 	ENTRY_NAME(hpux_unimplemented_wrapper)      /* 510 */
 	ENTRY_NAME(hpux_unimplemented_wrapper)
 	ENTRY_NAME(hpux_unimplemented_wrapper)
+END(hpux_call_table)
 .end
 
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 4204cd1f3cf9..c7a81a2c014c 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -35,13 +35,13 @@ int hpux_execve(struct pt_regs *regs)
 	int error;
 	char *filename;
 
-	filename = getname((char *) regs->gr[26]);
+	filename = getname((char __user *) regs->gr[26]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename, (char **) regs->gr[25],
-		(char **)regs->gr[24], regs);
+	error = do_execve(filename, (char __user * __user *) regs->gr[25],
+		(char __user * __user *) regs->gr[24], regs);
 
 	if (error == 0) {
 		task_lock(current);
@@ -63,19 +63,19 @@ struct hpux_dirent {
 };
 
 struct getdents_callback {
-	struct hpux_dirent *current_dir;
-	struct hpux_dirent *previous;
+	struct hpux_dirent __user *current_dir;
+	struct hpux_dirent __user *previous;
 	int count;
 	int error;
 };
 
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char *) (de)))
+#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
 #define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
 
 static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 		u64 ino, unsigned d_type)
 {
-	struct hpux_dirent * dirent;
+	struct hpux_dirent __user * dirent;
 	struct getdents_callback * buf = (struct getdents_callback *) __buf;
 	ino_t d_ino;
 	int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1);
@@ -105,10 +105,10 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 #undef NAME_OFFSET
 #undef ROUND_UP
 
-int hpux_getdents(unsigned int fd, struct hpux_dirent *dirent, unsigned int count)
+int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned int count)
 {
 	struct file * file;
-	struct hpux_dirent * lastdirent;
+	struct hpux_dirent __user * lastdirent;
 	struct getdents_callback buf;
 	int error = -EBADF;
 
@@ -143,7 +143,7 @@ int hpux_mount(const char *fs, const char *path, int mflag,
 	return -ENOSYS;
 }
 
-static int cp_hpux_stat(struct kstat *stat, struct hpux_stat64 *statbuf)
+static int cp_hpux_stat(struct kstat *stat, struct hpux_stat64 __user *statbuf)
 {
 	struct hpux_stat64 tmp;
 
@@ -169,7 +169,7 @@ static int cp_hpux_stat(struct kstat *stat, struct hpux_stat64 *statbuf)
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-long hpux_stat64(char *filename, struct hpux_stat64 *statbuf)
+long hpux_stat64(char __user *filename, struct hpux_stat64 __user *statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat(filename, &stat);
@@ -180,7 +180,7 @@ long hpux_stat64(char *filename, struct hpux_stat64 *statbuf)
 	return error;
 }
 
-long hpux_fstat64(unsigned int fd, struct hpux_stat64 *statbuf)
+long hpux_fstat64(unsigned int fd, struct hpux_stat64 __user *statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
@@ -191,7 +191,7 @@ long hpux_fstat64(unsigned int fd, struct hpux_stat64 *statbuf)
 	return error;
 }
 
-long hpux_lstat64(char *filename, struct hpux_stat64 *statbuf)
+long hpux_lstat64(char __user *filename, struct hpux_stat64 __user *statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat(filename, &stat);
diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S
index aaaf3306c05a..0b9d5b1e4b37 100644
--- a/arch/parisc/hpux/gate.S
+++ b/arch/parisc/hpux/gate.S
@@ -12,27 +12,18 @@
 #include <asm/asm-offsets.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
+#include <linux/linkage.h>
 
-#ifdef __LP64__
-	.level          2.0w
-#else
-	.level		1.1
-#endif
+	.level	LEVEL
 	.text
 
-#ifdef __LP64__
-#define FRAME_SIZE	128
-#else
-#define FRAME_SIZE	64
-#endif
 	.import hpux_call_table
 	.import hpux_syscall_exit,code
-	.export hpux_gateway_page
 
 	.align 4096
-hpux_gateway_page:
+ENTRY(hpux_gateway_page)
 	nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #warning NEEDS WORK for 64-bit
 #endif
 	ldw     -64(%r30), %r29                 ;! 8th argument
@@ -101,7 +92,7 @@ hpux_gateway_page:
 	ldo	R%hpux_call_table(%r21), %r21
 	comiclr,>>=	__NR_HPUX_syscalls, %r22, %r0
 	b,n	syscall_nosys
-	ldwx,s	%r22(%r21), %r21
+	LDREGX	%r22(%r21), %r21
 	ldil	L%hpux_syscall_exit,%r2
 	be	0(%sr7,%r21)
 	ldo	R%hpux_syscall_exit(%r2),%r2
@@ -110,7 +101,7 @@ syscall_nosys:
 	ldil	L%hpux_syscall_exit,%r1
 	be	R%hpux_syscall_exit(%sr7,%r1)
 	ldo	-ENOSYS(%r0),%r28
+ENDPROC(hpux_gateway_page)
 
 	.align 4096
-	.export end_hpux_gateway_page
-end_hpux_gateway_page:
+ENTRY(end_hpux_gateway_page)
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 04c2ff444396..3e025df2dc86 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -61,7 +61,7 @@ int hpux_ptrace(void)
 	return -ENOSYS;
 }
 
-int hpux_wait(int *stat_loc)
+int hpux_wait(int __user *stat_loc)
 {
 	return sys_waitpid(-1, stat_loc, 0);
 }
@@ -255,7 +255,7 @@ asmlinkage long hpux_fstatfs(unsigned int fd, struct hpux_statfs __user * buf)
 /*  TODO: Are these put_user calls OK?  Should they pass an int?
  *        (I copied it from sys_i386.c like this.)
  */
-static int hpux_uname(struct hpux_utsname *name)
+static int hpux_uname(struct hpux_utsname __user *name)
 {
 	int error;
 
@@ -300,14 +300,14 @@ static int hpux_uname(struct hpux_utsname *name)
 /*  Note: HP-UX just uses the old suser() function to check perms
  *  in this system call.  We'll use capable(CAP_SYS_ADMIN).
  */
-int hpux_utssys(char *ubuf, int n, int type)
+int hpux_utssys(char __user *ubuf, int n, int type)
 {
 	int len;
 	int error;
 	switch( type ) {
 	case 0:
 		/*  uname():  */
-		return( hpux_uname( (struct hpux_utsname *)ubuf ) );
+		return hpux_uname((struct hpux_utsname __user *)ubuf);
 		break ;
 	case 1:
 		/*  Obsolete (used to be umask().)  */
@@ -315,8 +315,9 @@ int hpux_utssys(char *ubuf, int n, int type)
 		break ;
 	case 2:
 		/*  ustat():  */
-		return( hpux_ustat(new_decode_dev(n), (struct hpux_ustat *)ubuf) );
-		break ;
+		return hpux_ustat(new_decode_dev(n),
+				  (struct hpux_ustat __user *)ubuf);
+		break;
 	case 3:
 		/*  setuname():
 		 *
@@ -332,7 +333,7 @@ int hpux_utssys(char *ubuf, int n, int type)
 			return -EINVAL ;
 		/*  Unlike Linux, HP-UX truncates it if n is too big:  */
 		len = (n <= __NEW_UTS_LEN) ? n : __NEW_UTS_LEN ;
-		return( sys_sethostname(ubuf, len) );
+		return sys_sethostname(ubuf, len);
 		break ;
 	case 4:
 		/*  sethostname():
@@ -346,7 +347,7 @@ int hpux_utssys(char *ubuf, int n, int type)
 			return -EINVAL ;
 		/*  Unlike Linux, HP-UX truncates it if n is too big:  */
 		len = (n <= __NEW_UTS_LEN) ? n : __NEW_UTS_LEN ;
-		return( sys_sethostname(ubuf, len) );
+		return sys_sethostname(ubuf, len);
 		break ;
 	case 5:
 		/*  gethostname():
@@ -356,7 +357,7 @@ int hpux_utssys(char *ubuf, int n, int type)
 		/*  Unlike Linux, HP-UX returns an error if n==0:  */
 		if ( n <= 0 )
 			return -EINVAL ;
-		return( sys_gethostname(ubuf, n) );
+		return sys_gethostname(ubuf, n);
 		break ;
 	case 6:
 		/*  Supposedly called from setuname() in libc.
@@ -420,7 +421,7 @@ int hpux_utssys(char *ubuf, int n, int type)
 	}
 }
 
-int hpux_getdomainname(char *name, int len)
+int hpux_getdomainname(char __user *name, int len)
 {
  	int nlen;
  	int err = -EFAULT;
@@ -471,17 +472,18 @@ int hpux_sysfs(int opcode, unsigned long arg1, unsigned long arg2)
 	printk(KERN_DEBUG "hpux_sysfs called with arg1='%lx'\n", arg1);
 
 	if ( opcode == 1 ) { /* GETFSIND */	
-		len = strlen_user((char *)arg1);
+		char __user *user_fsname = (char __user *)arg1;
+		len = strlen_user(user_fsname);
 		printk(KERN_DEBUG "len of arg1 = %d\n", len);
 		if (len == 0)
 			return 0;
 		fsname = kmalloc(len, GFP_KERNEL);
-		if ( !fsname ) {
+		if (!fsname) {
 			printk(KERN_DEBUG "failed to kmalloc fsname\n");
 			return 0;
 		}
 
-		if ( copy_from_user(fsname, (char *)arg1, len) ) {
+		if (copy_from_user(fsname, user_fsname, len)) {
 			printk(KERN_DEBUG "failed to copy_from_user fsname\n");
 			kfree(fsname);
 			return 0;
@@ -495,7 +497,7 @@ int hpux_sysfs(int opcode, unsigned long arg1, unsigned long arg2)
 			fstype = 0;
 		} else {
 			fstype = 0;
-		};
+		}
 
 		kfree(fsname);
 
@@ -509,7 +511,7 @@ int hpux_sysfs(int opcode, unsigned long arg1, unsigned long arg2)
 
 
 /* Table of syscall names and handle for unimplemented routines */
-static const char *syscall_names[] = {
+static const char * const syscall_names[] = {
 	"nosys",                  /* 0 */
 	"exit",                  
 	"fork",                  
diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S
index 0b0c3a66b1be..58c53c879c02 100644
--- a/arch/parisc/hpux/wrappers.S
+++ b/arch/parisc/hpux/wrappers.S
@@ -20,19 +20,16 @@
  *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #warning PA64 support needs more work...did first cut
 #endif
 
 #include <asm/asm-offsets.h>
 #include <asm/assembly.h>
 #include <asm/signal.h>
+#include <linux/linkage.h>
 
-#ifdef __LP64__
-	.level          2.0w
-#else
-	.level		1.1
-#endif
+	.level	LEVEL
 	.text
 
 	/* These should probably go in a header file somewhere.
@@ -41,7 +38,7 @@
 	 * register save/restore macros.
 	 */
 	.macro	reg_save regs
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #warning NEEDS WORK for 64-bit
 #endif
 	STREG	%r3, PT_GR3(\regs)
@@ -82,11 +79,9 @@
 	.endm
 
 
-	.export hpux_fork_wrapper
-	.export hpux_child_return
 	.import sys_fork
 
-hpux_fork_wrapper:
+ENTRY(hpux_fork_wrapper)
 	ldo	TASK_REGS-TASK_SZ_ALGN-64(%r30),%r1	    ;! get pt regs
 							    ;! pointer in task
 	reg_save %r1
@@ -128,27 +123,26 @@ fork_return:
 fork_exit:
 	bv	%r0(%r2)
 	nop
+ENDPROC(hpux_fork_wrapper)
 
 	/* Set the return value for the child */
 
-hpux_child_return:
+ENTRY(hpux_child_return)
 #if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
-	bl	schedule_tail, %r2
-	nop
+	bl,n	schedule_tail, %r2
 #endif
 
 	LDREG	TASK_PT_GR19-TASK_SZ_ALGN-128(%r30),%r2
 	b fork_return
 	copy %r0,%r28
+ENDPROC(hpux_child_return)
 
-	.export hpux_execve_wrapper
-	.export hpux_execv_wrapper
 	.import hpux_execve
 
-hpux_execv_wrapper:
+ENTRY(hpux_execv_wrapper)
 	copy %r0,%r24  /* NULL environment */
 
-hpux_execve_wrapper:
+ENTRY(hpux_execve_wrapper)
 
 	ldo	TASK_REGS-TASK_SZ_ALGN-64(%r30),%r1	    ;! get pt regs
 
@@ -187,13 +181,13 @@ hpux_execve_wrapper:
 exec_error:
 	bv %r0(%r19)
 	nop
+ENDPROC(hpux_execv_wrapper)
 
-	.export hpux_pipe_wrapper
 	.import hpux_pipe
 
 	/* HP-UX expects pipefd's returned in r28 & r29 */
 
-hpux_pipe_wrapper:
+ENTRY(hpux_pipe_wrapper)
 	STREG %r2,-20(%r30)
 	ldo 64(%r30),%r30
 	bl hpux_pipe,%r2
@@ -212,12 +206,11 @@ hpux_pipe_wrapper:
 pipe_exit:
 	bv %r0(%r2)
 	ldo -64(%r30),%r30
+ENDPROC(hpux_pipe_wrapper)
 
-	.export hpux_syscall_exit
 	.import syscall_exit
 
-hpux_syscall_exit:
-
+ENTRY(hpux_syscall_exit)
 	/*
 	 *
 	 * HP-UX call return conventions:
@@ -246,12 +239,12 @@ hpux_syscall_exit:
 	ldo 1(%r0),%r22
 
 no_error:
-	b syscall_exit
-	nop
+	b,n syscall_exit
+ENDPROC(hpux_syscall_exit)
 
-	.export hpux_unimplemented_wrapper
 	.import hpux_unimplemented
 
-hpux_unimplemented_wrapper:
+ENTRY(hpux_unimplemented_wrapper)
 	b hpux_unimplemented
 	STREG %r22,-64(%r30)  /* overwrite arg8 with syscall number */
+ENDPROC(hpux_unimplemented_wrapper)
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index c11a5bc7c067..54fdb959149c 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -44,7 +44,7 @@
 
 #define BLANK() asm volatile("\n->" : : )
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define FRAME_SIZE	128
 #else
 #define FRAME_SIZE	64
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 0be51e92a2fc..0dc924ccceb5 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -68,16 +68,6 @@ flush_cache_all_local(void)
 }
 EXPORT_SYMBOL(flush_cache_all_local);
 
-/* flushes EVERYTHING (tlb & cache) */
-
-void
-flush_all_caches(void)
-{
-	flush_cache_all();
-	flush_tlb_all();
-}
-EXPORT_SYMBOL(flush_all_caches);
-
 void
 update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
 {
@@ -99,7 +89,7 @@ show_cache_info(struct seq_file *m)
 
 	seq_printf(m, "I-cache\t\t: %ld KB\n", 
 		cache_info.ic_size/1024 );
-	if (cache_info.dc_loop == 1)
+	if (cache_info.dc_loop != 1)
 		snprintf(buf, 32, "%lu-way associative", cache_info.dc_loop);
 	seq_printf(m, "D-cache\t\t: %ld KB (%s%s, %s)\n",
 		cache_info.dc_size/1024,
@@ -270,6 +260,83 @@ void disable_sr_hashing(void)
 		panic("SpaceID hashing is still on!\n");
 }
 
+/* Simple function to work out if we have an existing address translation
+ * for a user space vma. */
+static inline int translation_exists(struct vm_area_struct *vma,
+				unsigned long addr, unsigned long pfn)
+{
+	pgd_t *pgd = pgd_offset(vma->vm_mm, addr);
+	pmd_t *pmd;
+	pte_t pte;
+
+	if(pgd_none(*pgd))
+		return 0;
+
+	pmd = pmd_offset(pgd, addr);
+	if(pmd_none(*pmd) || pmd_bad(*pmd))
+		return 0;
+
+	/* We cannot take the pte lock here: flush_cache_page is usually
+	 * called with pte lock already held.  Whereas flush_dcache_page
+	 * takes flush_dcache_mmap_lock, which is lower in the hierarchy:
+	 * the vma itself is secure, but the pte might come or go racily.
+	 */
+	pte = *pte_offset_map(pmd, addr);
+	/* But pte_unmap() does nothing on this architecture */
+
+	/* Filter out coincidental file entries and swap entries */
+	if (!(pte_val(pte) & (_PAGE_FLUSH|_PAGE_PRESENT)))
+		return 0;
+
+	return pte_pfn(pte) == pfn;
+}
+
+/* Private function to flush a page from the cache of a non-current
+ * process.  cr25 contains the Page Directory of the current user
+ * process; we're going to hijack both it and the user space %sr3 to
+ * temporarily make the non-current process current.  We have to do
+ * this because cache flushing may cause a non-access tlb miss which
+ * the handlers have to fill in from the pgd of the non-current
+ * process. */
+static inline void
+flush_user_cache_page_non_current(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+	/* save the current process space and pgd */
+	unsigned long space = mfsp(3), pgd = mfctl(25);
+
+	/* we don't mind taking interrups since they may not
+	 * do anything with user space, but we can't
+	 * be preempted here */
+	preempt_disable();
+
+	/* make us current */
+	mtctl(__pa(vma->vm_mm->pgd), 25);
+	mtsp(vma->vm_mm->context, 3);
+
+	flush_user_dcache_page(vmaddr);
+	if(vma->vm_flags & VM_EXEC)
+		flush_user_icache_page(vmaddr);
+
+	/* put the old current process back */
+	mtsp(space, 3);
+	mtctl(pgd, 25);
+	preempt_enable();
+}
+
+
+static inline void
+__flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	if (likely(vma->vm_mm->context == mfsp(3))) {
+		flush_user_dcache_page(vmaddr);
+		if (vma->vm_flags & VM_EXEC)
+			flush_user_icache_page(vmaddr);
+	} else {
+		flush_user_cache_page_non_current(vma, vmaddr);
+	}
+}
+
 void flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping = page_mapping(page);
@@ -342,7 +409,7 @@ void clear_user_page_asm(void *page, unsigned long vaddr)
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
 int parisc_cache_flush_threshold __read_mostly = FLUSH_THRESHOLD;
 
-void parisc_setup_cache_timing(void)
+void __init parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
 	unsigned long size;
@@ -366,6 +433,9 @@ void parisc_setup_cache_timing(void)
 	if (!parisc_cache_flush_threshold)
 		parisc_cache_flush_threshold = FLUSH_THRESHOLD;
 
+	if (parisc_cache_flush_threshold > cache_info.dc_size)
+		parisc_cache_flush_threshold = cache_info.dc_size;
+
 	printk(KERN_INFO "Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus());
 }
 
@@ -410,3 +480,97 @@ void kunmap_parisc(void *addr)
 }
 EXPORT_SYMBOL(kunmap_parisc);
 #endif
+
+void __flush_tlb_range(unsigned long sid, unsigned long start,
+		       unsigned long end)
+{
+	unsigned long npages;
+
+	npages = ((end - (start & PAGE_MASK)) + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
+		flush_tlb_all();
+	else {
+		mtsp(sid, 1);
+		purge_tlb_start();
+		if (split_tlb) {
+			while (npages--) {
+				pdtlb(start);
+				pitlb(start);
+				start += PAGE_SIZE;
+			}
+		} else {
+			while (npages--) {
+				pdtlb(start);
+				start += PAGE_SIZE;
+			}
+		}
+		purge_tlb_end();
+	}
+}
+
+static void cacheflush_h_tmp_function(void *dummy)
+{
+	flush_cache_all_local();
+}
+
+void flush_cache_all(void)
+{
+	on_each_cpu(cacheflush_h_tmp_function, NULL, 1, 1);
+}
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+#ifdef CONFIG_SMP
+	flush_cache_all();
+#else
+	flush_cache_all_local();
+#endif
+}
+
+void
+flush_user_dcache_range(unsigned long start, unsigned long end)
+{
+	if ((end - start) < parisc_cache_flush_threshold)
+		flush_user_dcache_range_asm(start,end);
+	else
+		flush_data_cache();
+}
+
+void
+flush_user_icache_range(unsigned long start, unsigned long end)
+{
+	if ((end - start) < parisc_cache_flush_threshold)
+		flush_user_icache_range_asm(start,end);
+	else
+		flush_instruction_cache();
+}
+
+
+void flush_cache_range(struct vm_area_struct *vma,
+		unsigned long start, unsigned long end)
+{
+	int sr3;
+
+	if (!vma->vm_mm->context) {
+		BUG();
+		return;
+	}
+
+	sr3 = mfsp(3);
+	if (vma->vm_mm->context == sr3) {
+		flush_user_dcache_range(start,end);
+		flush_user_icache_range(start,end);
+	} else {
+		flush_cache_all();
+	}
+}
+
+void
+flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
+{
+	BUG_ON(!vma->vm_mm->context);
+
+	if (likely(translation_exists(vma, vmaddr, pfn)))
+		__flush_cache_page(vma, vmaddr);
+
+}
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d6c486e9501c..2ca654bd6322 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -562,12 +562,23 @@ pa_dev_attr(rev, id.hversion_rev, "0x%x\n");
 pa_dev_attr_id(hversion, "0x%03x\n");
 pa_dev_attr_id(sversion, "0x%05x\n");
 
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct parisc_device *padev = to_parisc_device(dev);
+	struct parisc_device_id *id = &padev->id;
+
+	return sprintf(buf, "parisc:t%02Xhv%04Xrev%02Xsv%08X\n",
+		(u8)id->hw_type, (u16)id->hversion, (u8)id->hversion_rev,
+		(u32)id->sversion);
+}
+
 static struct device_attribute parisc_device_attrs[] = {
 	__ATTR_RO(irq),
 	__ATTR_RO(hw_type),
 	__ATTR_RO(rev),
 	__ATTR_RO(hversion),
 	__ATTR_RO(sversion),
+	__ATTR_RO(modalias),
 	__ATTR_NULL,
 };
 
@@ -689,7 +700,9 @@ parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
 		.fn	= check_parent,
 	};
 
-	device_for_each_child(parent, &recurse_data, descend_children);
+	if (device_for_each_child(parent, &recurse_data, descend_children))
+		/* nothing */;
+
 	return d.dev;
 }
 
@@ -835,8 +848,8 @@ static void print_parisc_device(struct parisc_device *dev)
 	static int count;
 
 	print_pa_hwpath(dev, hw_path);
-	printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
-		++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
+	printk(KERN_INFO "%d. %s at 0x%p [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
+		++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type,
 		dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
 
 	if (dev->num_addrs) {
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 340b5e8d67ba..8474f9e5ca10 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -37,6 +37,8 @@
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
 
+#include <linux/linkage.h>
+
 #ifdef CONFIG_64BIT
 #define CMPIB           cmpib,*
 #define CMPB            cmpb,*
@@ -648,13 +650,11 @@
 	 * the static part of the kernel address space.
 	 */
 
-	.export fault_vector_20
-
 	.text
 
 	.align 4096
 
-fault_vector_20:
+ENTRY(fault_vector_20)
 	/* First vector is invalid (0) */
 	.ascii	"cows can fly"
 	.byte 0
@@ -695,14 +695,13 @@ fault_vector_20:
 	def		29
 	def		30
 	def		31
+END(fault_vector_20)
 
 #ifndef CONFIG_64BIT
 
-	.export fault_vector_11
-	
 	.align 2048
 
-fault_vector_11:
+ENTRY(fault_vector_11)
 	/* First vector is invalid (0) */
 	.ascii	"cows can fly"
 	.byte 0
@@ -743,6 +742,7 @@ fault_vector_11:
 	def		29
 	def		30
 	def		31
+END(fault_vector_11)
 
 #endif
 
@@ -762,9 +762,8 @@ fault_vector_11:
 #define CLONE_VM 0x100	/* Must agree with <linux/sched.h> */
 #define CLONE_UNTRACED 0x00800000
 
-	.export __kernel_thread, code
 	.import do_fork
-__kernel_thread:
+ENTRY(__kernel_thread)
 	STREG	%r2, -RP_OFFSET(%r30)
 
 	copy	%r30, %r1
@@ -797,6 +796,7 @@ __kernel_thread:
 	ldo	-PT_SZ_ALGN(%r30), %r30
 	bv	%r0(%r2)
 	nop
+ENDPROC(__kernel_thread)
 
 	/*
 	 * Child Returns here
@@ -805,8 +805,7 @@ __kernel_thread:
 	 * into task save area.
 	 */
 
-	.export	ret_from_kernel_thread
-ret_from_kernel_thread:
+ENTRY(ret_from_kernel_thread)
 
 	/* Call schedule_tail first though */
 	BL	schedule_tail, %r2
@@ -833,10 +832,10 @@ ret_from_kernel_thread:
 	bv	%r0(%r1)
 #endif
 	ldi	0, %r26
+ENDPROC(ret_from_kernel_thread)
 
 	.import	sys_execve, code
-	.export	__execve, code
-__execve:
+ENTRY(__execve)
 	copy	%r2, %r15
 	copy	%r30, %r16
 	ldo	PT_SZ_ALGN(%r30), %r30
@@ -856,16 +855,15 @@ __execve:
 	copy	%r16, %r30
 	bv	%r0(%r2)
 	nop
+ENDPROC(__execve)
 
-	.align 4
 
 	/*
 	 * struct task_struct *_switch_to(struct task_struct *prev,
 	 *	struct task_struct *next)
 	 *
 	 * switch kernel stacks and return prev */
-	.export	_switch_to, code
-_switch_to:
+ENTRY(_switch_to)
 	STREG	 %r2, -RP_OFFSET(%r30)
 
 	callee_save_float
@@ -890,6 +888,7 @@ _switch_to_ret:
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
 	copy	%r26, %r28
+ENDPROC(_switch_to)
 
 	/*
 	 * Common rfi return path for interruptions, kernel execve, and
@@ -907,8 +906,7 @@ _switch_to_ret:
 
 	.align 4096
 
-	.export	syscall_exit_rfi
-syscall_exit_rfi:
+ENTRY(syscall_exit_rfi)
 	mfctl   %cr30,%r16
 	LDREG	TI_TASK(%r16), %r16	/* thread_info -> task_struct */
 	ldo	TASK_REGS(%r16),%r16
@@ -978,11 +976,36 @@ intr_check_resched:
 	LDREG   TI_FLAGS(%r1),%r19	/* sched.h: TIF_NEED_RESCHED */
 	bb,<,n	%r19,31-TIF_NEED_RESCHED,intr_do_resched /* forward */
 
+	.import do_notify_resume,code
 intr_check_sig:
 	/* As above */
 	mfctl   %cr30,%r1
-	LDREG	TI_FLAGS(%r1),%r19	/* sched.h: TIF_SIGPENDING */
-	bb,<,n %r19, 31-TIF_SIGPENDING, intr_do_signal /* forward */
+	LDREG	TI_FLAGS(%r1),%r19
+	ldi	(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %r20
+	and,COND(<>)	%r19, %r20, %r0
+	b,n	intr_restore	/* skip past if we've nothing to do */
+
+	/* This check is critical to having LWS
+	 * working. The IASQ is zero on the gateway
+	 * page and we cannot deliver any signals until
+	 * we get off the gateway page.
+	 *
+	 * Only do signals if we are returning to user space
+	 */
+	LDREG	PT_IASQ0(%r16), %r20
+	CMPIB=,n 0,%r20,intr_restore /* backward */
+	LDREG	PT_IASQ1(%r16), %r20
+	CMPIB=,n 0,%r20,intr_restore /* backward */
+
+	copy	%r0, %r25			/* long in_syscall = 0 */
+#ifdef CONFIG_64BIT
+	ldo	-16(%r30),%r29			/* Reference param save area */
+#endif
+
+	BL	do_notify_resume,%r2
+	copy	%r16, %r26			/* struct pt_regs *regs */
+
+	b,n	intr_check_sig
 
 intr_restore:
 	copy            %r16,%r29
@@ -1072,35 +1095,6 @@ intr_do_preempt:
 	b,n	intr_restore		/* ssm PSW_SM_I done by intr_restore */
 #endif /* CONFIG_PREEMPT */
 
-	.import do_signal,code
-intr_do_signal:
-	/* 
-		This check is critical to having LWS
-		working. The IASQ is zero on the gateway
-		page and we cannot deliver any signals until
-		we get off the gateway page.
-
-		Only do signals if we are returning to user space 
-	*/
-	LDREG	PT_IASQ0(%r16), %r20
-	CMPIB= 0,%r20,intr_restore /* backward */
-	nop
-	LDREG	PT_IASQ1(%r16), %r20
-	CMPIB= 0,%r20,intr_restore /* backward */
-	nop
-
-	copy	%r0, %r24			/* unsigned long in_syscall */
-	copy	%r16, %r25			/* struct pt_regs *regs */
-#ifdef CONFIG_64BIT
-	ldo	-16(%r30),%r29			/* Reference param save area */
-#endif
-
-	BL	do_signal,%r2
-	copy	%r0, %r26			/* sigset_t *oldset = NULL */
-
-	b	intr_check_sig
-	nop
-
 	/*
 	 * External interrupts.
 	 */
@@ -1115,11 +1109,7 @@ intr_extint:
 	mfctl	%cr31,%r1
 	copy	%r30,%r17
 	/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef CONFIG_64BIT
-	depdi	0,63,15,%r17
-#else
-	depi	0,31,15,%r17
-#endif
+	DEPI	0,31,15,%r17
 	CMPB=,n	%r1,%r17,2f
 	get_stack_use_cr31
 	b,n 3f
@@ -1148,13 +1138,12 @@ intr_extint:
 
 	b	do_cpu_irq_mask
 	ldo	R%intr_return(%r2), %r2	/* return to intr_return, not here */
+ENDPROC(syscall_exit_rfi)
 
 
 	/* Generic interruptions (illegal insn, unaligned, page fault, etc) */
 
-	.export         intr_save, code /* for os_hpmc */
-
-intr_save:
+ENTRY(intr_save)		/* for os_hpmc */
 	mfsp    %sr7,%r16
 	CMPIB=,n 0,%r16,1f
 	get_stack_use_cr30
@@ -1229,6 +1218,7 @@ skip_save_ior:
 
 	b		handle_interruption
 	ldo		R%intr_check_sig(%r2), %r2
+ENDPROC(intr_save)
 
 
 	/*
@@ -1814,9 +1804,7 @@ dtlb_fault:
 	LDREG   PT_GR18(\regs),%r18
 	.endm
 
-	.export sys_fork_wrapper
-	.export child_return
-sys_fork_wrapper:
+ENTRY(sys_fork_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1
 	ldo	TASK_REGS(%r1),%r1
 	reg_save %r1
@@ -1853,9 +1841,10 @@ wrapper_exit:
 	ldi	__NR_fork,%r20
 	bv %r0(%r2)
 	STREG	%r20,PT_GR20(%r1)
+ENDPROC(sys_fork_wrapper)
 
 	/* Set the return value for the child */
-child_return:
+ENTRY(child_return)
 	BL	schedule_tail, %r2
 	nop
 
@@ -1863,10 +1852,10 @@ child_return:
 	LDREG	TASK_PT_GR19(%r1),%r2
 	b	wrapper_exit
 	copy	%r0,%r28
+ENDPROC(child_return)
 
-	
-	.export sys_clone_wrapper
-sys_clone_wrapper:
+
+ENTRY(sys_clone_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
 	ldo	TASK_REGS(%r1),%r1	/* get pt regs */
 	reg_save %r1
@@ -1887,9 +1876,10 @@ sys_clone_wrapper:
 
 	b	wrapper_exit
 	LDREG	-RP_OFFSET-FRAME_SIZE(%r30),%r2
+ENDPROC(sys_clone_wrapper)
+
 
-	.export sys_vfork_wrapper
-sys_vfork_wrapper:
+ENTRY(sys_vfork_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
 	ldo	TASK_REGS(%r1),%r1	/* get pt regs */
 	reg_save %r1
@@ -1910,6 +1900,7 @@ sys_vfork_wrapper:
 
 	b	wrapper_exit
 	LDREG	-RP_OFFSET-FRAME_SIZE(%r30),%r2
+ENDPROC(sys_vfork_wrapper)
 
 	
 	.macro  execve_wrapper execve
@@ -1946,22 +1937,19 @@ error_\execve:
 	nop
 	.endm
 
-	.export sys_execve_wrapper
 	.import sys_execve
-
-sys_execve_wrapper:
+ENTRY(sys_execve_wrapper)
 	execve_wrapper sys_execve
+ENDPROC(sys_execve_wrapper)
 
 #ifdef CONFIG_64BIT
-	.export sys32_execve_wrapper
 	.import sys32_execve
-
-sys32_execve_wrapper:
+ENTRY(sys32_execve_wrapper)
 	execve_wrapper sys32_execve
+ENDPROC(sys32_execve_wrapper)
 #endif
 
-	.export sys_rt_sigreturn_wrapper
-sys_rt_sigreturn_wrapper:
+ENTRY(sys_rt_sigreturn_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26
 	ldo	TASK_REGS(%r26),%r26	/* get pt regs */
 	/* Don't save regs, we are going to restore them from sigcontext. */
@@ -1989,9 +1977,9 @@ sys_rt_sigreturn_wrapper:
 	 */
 	bv	%r0(%r2)
 	LDREG	PT_GR28(%r1),%r28  /* reload original r28 for syscall_exit */
+ENDPROC(sys_rt_sigreturn_wrapper)
 
-	.export sys_sigaltstack_wrapper
-sys_sigaltstack_wrapper:
+ENTRY(sys_sigaltstack_wrapper)
 	/* Get the user stack pointer */
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
 	ldo	TASK_REGS(%r1),%r24	/* get pt regs */
@@ -1999,10 +1987,10 @@ sys_sigaltstack_wrapper:
 	STREG	%r2, -RP_OFFSET(%r30)
 #ifdef CONFIG_64BIT
 	ldo	FRAME_SIZE(%r30), %r30
-	b,l	do_sigaltstack,%r2
+	BL	do_sigaltstack,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #else
-	bl	do_sigaltstack,%r2
+	BL	do_sigaltstack,%r2
 	ldo	FRAME_SIZE(%r30), %r30
 #endif
 
@@ -2010,53 +1998,26 @@ sys_sigaltstack_wrapper:
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
 	nop
+ENDPROC(sys_sigaltstack_wrapper)
 
 #ifdef CONFIG_64BIT
-	.export sys32_sigaltstack_wrapper
-sys32_sigaltstack_wrapper:
+ENTRY(sys32_sigaltstack_wrapper)
 	/* Get the user stack pointer */
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r24
 	LDREG	TASK_PT_GR30(%r24),%r24
 	STREG	%r2, -RP_OFFSET(%r30)
 	ldo	FRAME_SIZE(%r30), %r30
-	b,l	do_sigaltstack32,%r2
+	BL	do_sigaltstack32,%r2
 	ldo	-16(%r30),%r29		/* Reference param save area */
 
 	ldo	-FRAME_SIZE(%r30), %r30
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
 	nop
+ENDPROC(sys32_sigaltstack_wrapper)
 #endif
 
-	.export sys_rt_sigsuspend_wrapper
-sys_rt_sigsuspend_wrapper:
-	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1
-	ldo	TASK_REGS(%r1),%r24
-	reg_save %r24
-
-	STREG	%r2, -RP_OFFSET(%r30)
-#ifdef CONFIG_64BIT
-	ldo	FRAME_SIZE(%r30), %r30
-	b,l	sys_rt_sigsuspend,%r2
-	ldo	-16(%r30),%r29		/* Reference param save area */
-#else
-	bl	sys_rt_sigsuspend,%r2
-	ldo	FRAME_SIZE(%r30), %r30
-#endif
-
-	ldo	-FRAME_SIZE(%r30), %r30
-	LDREG	-RP_OFFSET(%r30), %r2
-
-	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1
-	ldo	TASK_REGS(%r1),%r1
-	reg_restore %r1
-
-	bv	%r0(%r2)
-	nop
-
-	.export syscall_exit
-syscall_exit:
-
+ENTRY(syscall_exit)
 	/* NOTE: HP-UX syscalls also come through here
 	 * after hpux_syscall_exit fixes up return
 	 * values. */
@@ -2119,9 +2080,35 @@ syscall_check_resched:
 	LDREG	TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19	/* long */
 	bb,<,n	%r19, 31-TIF_NEED_RESCHED, syscall_do_resched /* forward */
 
+	.import do_signal,code
 syscall_check_sig:
-	LDREG	TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19    /* get ti flags */
-	bb,<,n	%r19, 31-TIF_SIGPENDING, syscall_do_signal /* forward */
+	LDREG	TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
+	ldi	(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %r26
+	and,COND(<>)	%r19, %r26, %r0
+	b,n	syscall_restore	/* skip past if we've nothing to do */
+
+syscall_do_signal:
+	/* Save callee-save registers (for sigcontext).
+	 * FIXME: After this point the process structure should be
+	 * consistent with all the relevant state of the process
+	 * before the syscall.  We need to verify this.
+	 */
+	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
+	ldo	TASK_REGS(%r1), %r26		/* struct pt_regs *regs */
+	reg_save %r26
+
+#ifdef CONFIG_64BIT
+	ldo	-16(%r30),%r29			/* Reference param save area */
+#endif
+
+	BL	do_notify_resume,%r2
+	ldi	1, %r25				/* long in_syscall = 1 */
+
+	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
+	ldo	TASK_REGS(%r1), %r20		/* reload pt_regs */
+	reg_restore %r20
+
+	b,n     syscall_check_sig
 
 syscall_restore:
 	/* Are we being ptraced? */
@@ -2259,31 +2246,10 @@ syscall_do_resched:
 #endif
 	b       syscall_check_bh  /* if resched, we start over again */
 	nop
+ENDPROC(syscall_exit)
 
-	.import do_signal,code
-syscall_do_signal:
-	/* Save callee-save registers (for sigcontext).
-	   FIXME: After this point the process structure should be
-	   consistent with all the relevant state of the process
-	   before the syscall.  We need to verify this. */
-	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 
-	ldo	TASK_REGS(%r1), %r25		/* struct pt_regs *regs */
-	reg_save %r25
-
-	ldi	1, %r24				/* unsigned long in_syscall */
-
-#ifdef CONFIG_64BIT
-	ldo	-16(%r30),%r29			/* Reference param save area */
-#endif
-	BL	do_signal,%r2
-	copy	%r0, %r26			/* sigset_t *oldset = NULL */
-
-	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
-	ldo	TASK_REGS(%r1), %r20		/* reload pt_regs */
-	reg_restore %r20
-
-	b,n     syscall_check_sig
 
+get_register:
 	/*
 	 * get_register is used by the non access tlb miss handlers to
 	 * copy the value of the general register specified in r8 into
@@ -2294,8 +2260,6 @@ syscall_do_signal:
 	 * a -1 in it, but that is OK, it just means that we will have
 	 * to use the slow path instead).
 	 */
-
-get_register:
 	blr     %r8,%r0
 	nop
 	bv      %r0(%r25)    /* r0 */
@@ -2363,13 +2327,13 @@ get_register:
 	bv      %r0(%r25)    /* r31 */
 	copy    %r31,%r1
 
+
+set_register:
 	/*
 	 * set_register is used by the non access tlb miss handlers to
 	 * copy the value of r1 into the general register specified in
 	 * r8.
 	 */
-
-set_register:
 	blr     %r8,%r0
 	nop
 	bv      %r0(%r25)    /* r0 (silly, but it is a place holder) */
@@ -2436,3 +2400,4 @@ set_register:
 	copy    %r1,%r30
 	bv      %r0(%r25)    /* r31 */
 	copy    %r1,%r31
+
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 9158b707c0dd..39dc835bf89e 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -74,7 +74,7 @@ static DEFINE_SPINLOCK(pdc_lock);
 static unsigned long pdc_result[32] __attribute__ ((aligned (8)));
 static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define WIDE_FIRMWARE 0x1
 #define NARROW_FIRMWARE 0x2
 
@@ -94,12 +94,12 @@ int parisc_narrow_firmware __read_mostly = 1;
  * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
  */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 long real64_call(unsigned long function, ...);
 #endif
 long real32_call(unsigned long function, ...);
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #   define MEM_PDC (unsigned long)(PAGE0->mem_pdc_hi) << 32 | PAGE0->mem_pdc
 #   define mem_pdc_call(args...) unlikely(parisc_narrow_firmware) ? real32_call(MEM_PDC, args) : real64_call(MEM_PDC, args)
 #else
@@ -117,7 +117,7 @@ long real32_call(unsigned long function, ...);
  */
 static unsigned long f_extend(unsigned long address)
 {
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if(unlikely(parisc_narrow_firmware)) {
 		if((address & 0xff000000) == 0xf0000000)
 			return 0xf0f0f0f000000000UL | (u32)address;
@@ -139,7 +139,7 @@ static unsigned long f_extend(unsigned long address)
  */
 static void convert_to_wide(unsigned long *addr)
 {
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	int i;
 	unsigned int *p = (unsigned int *)addr;
 
@@ -158,7 +158,7 @@ static void convert_to_wide(unsigned long *addr)
  */
 void __init set_firmware_width(void)
 {
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	int retval;
 	unsigned long flags;
 
@@ -238,7 +238,7 @@ int __init pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_inf
  * 
  * Must be correctly formatted or expect system crash
  */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 int pdc_pat_chassis_send_log(unsigned long state, unsigned long data)
 {
 	int retval = 0;
@@ -949,7 +949,7 @@ int pdc_tod_set(unsigned long sec, unsigned long usec)
 }
 EXPORT_SYMBOL(pdc_tod_set);
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
 		struct pdc_memory_table *tbl, unsigned long entries)
 {
@@ -965,7 +965,7 @@ int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
 
 	return retval;
 }
-#endif /* __LP64__ */
+#endif /* CONFIG_64BIT */
 
 /* FIXME: Is this pdc used?  I could not find type reference to ftc_bitmap
  * so I guessed at unsigned long.  Someone who knows what this does, can fix
@@ -1204,7 +1204,7 @@ int pdc_sti_call(unsigned long func, unsigned long flags,
 }
 EXPORT_SYMBOL(pdc_sti_call);
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 /**
  * pdc_pat_cell_get_number - Returns the cell number.
  * @cell_info: The return buffer.
@@ -1387,7 +1387,7 @@ int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val)
 
 	return retval;
 }
-#endif /* __LP64__ */
+#endif /* CONFIG_64BIT */
 
 
 /***************** 32-bit real-mode calls ***********/
@@ -1445,7 +1445,7 @@ long real32_call(unsigned long fn, ...)
 	return real32_call_asm(&real_stack.sp, &real_stack.arg0, fn);
 }
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 /***************** 64-bit real-mode calls ***********/
 
 struct wide_stack {
@@ -1496,5 +1496,5 @@ long real64_call(unsigned long fn, ...)
 	return real64_call_asm(&real64_stack.sp, &real64_stack.arg0, fn);
 }
 
-#endif /* __LP64__ */
+#endif /* CONFIG_64BIT */
 
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index eaad2328fea1..9676c486bb63 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -2,7 +2,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1999 by Helge Deller
+ * Copyright (C) 1999-2007 by Helge Deller <deller@gmx.de>
  * Copyright 1999 SuSE GmbH (Philipp Rumpf)
  * Copyright 1999 Philipp Rumpf (prumpf@tux.org)
  * Copyright 2000 Hewlett Packard (Paul Bame, bame@puffin.external.hp.com)
@@ -19,16 +19,17 @@
 #include <asm/assembly.h>
 #include <asm/pgtable.h>
 
+#include <linux/linkage.h>
+
 	.level	LEVEL
 
 	.data
-
-	.export boot_args
-boot_args:
+ENTRY(boot_args)
 	.word 0 /* arg0 */
 	.word 0 /* arg1 */
 	.word 0 /* arg2 */
 	.word 0 /* arg3 */
+END(boot_args)
 
 	.text
 	.align	4
@@ -38,10 +39,9 @@ boot_args:
         .import fault_vector_11,code    /* IVA parisc 1.1 32 bit */
 	.import	$global$		/* forward declaration */
 #endif /*!CONFIG_64BIT*/
-	.export stext
 	.export _stext,data		/* Kernel want it this way! */
 _stext:
-stext:
+ENTRY(stext)
 	.proc
 	.callinfo
 
@@ -343,6 +343,9 @@ smp_slave_stext:
 
 	.procend
 #endif /* CONFIG_SMP */
+
+ENDPROC(stext)
+
 #ifndef CONFIG_64BIT
 	.data
 
diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S
index c412c0adc4a9..d8baa158d8a0 100644
--- a/arch/parisc/kernel/hpmc.S
+++ b/arch/parisc/kernel/hpmc.S
@@ -46,6 +46,8 @@
 #include <asm/assembly.h>
 #include <asm/pdc.h>
 
+#include <linux/linkage.h>
+
 	/*
 	 * stack for os_hpmc, the HPMC handler.
 	 * buffer for IODC procedures (for the HPMC handler).
@@ -69,17 +71,15 @@ hpmc_raddr:
 
 #define HPMC_PIM_DATA_SIZE 896 /* Enough to hold all architected 2.0 state */
 
-	.export hpmc_pim_data, data
 	.align 8
-hpmc_pim_data:
+ENTRY(hpmc_pim_data)
 	.block HPMC_PIM_DATA_SIZE
+END(hpmc_pim_data)
 
 	.text
 
-	.export os_hpmc, code
 	.import intr_save, code
-
-os_hpmc:
+ENTRY(os_hpmc)
 
 	/*
 	 * registers modified:
@@ -294,11 +294,9 @@ os_hpmc_6:
 
 	b .
 	nop
+ENDPROC(os_hpmc)
 
 	/* this label used to compute os_hpmc checksum */
-
-	.export os_hpmc_end, code
-
-os_hpmc_end:
+ENTRY(os_hpmc_end)
 
 	nop
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index 4e847ba53180..4845a6444633 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -47,7 +47,7 @@ void __init setup_pdc(void)
 	struct pdc_system_map_mod_info module_result;
 	struct pdc_module_path module_path;
 	struct pdc_model model;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	struct pdc_pat_cell_num cell_info;
 #endif
 
@@ -73,7 +73,7 @@ void __init setup_pdc(void)
 	 * clearer message.
 	 */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	status = pdc_pat_cell_get_number(&cell_info);
 	if (status == PDC_OK) {
 		pdc_type = PDC_TYPE_PAT;
@@ -152,7 +152,7 @@ static void __init pagezero_memconfig(void)
 	npmem_ranges = 1;
 }
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 /* All of the PDC PAT specific code is 64-bit only */
 
@@ -408,13 +408,13 @@ static void __init sprockets_memconfig(void)
 	}
 }
 
-#else   /* !__LP64__ */
+#else   /* !CONFIG_64BIT */
 
 #define pat_inventory() do { } while (0)
 #define pat_memconfig() do { } while (0)
 #define sprockets_memconfig() pagezero_memconfig()
 
-#endif	/* !__LP64__ */
+#endif	/* !CONFIG_64BIT */
 
 
 #ifndef CONFIG_PA20
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index b39c5b9aff46..e9d09b020e86 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -336,11 +336,7 @@ unsigned int txn_alloc_data(unsigned int virt_irq)
 
 static inline int eirr_to_irq(unsigned long eirr)
 {
-#ifdef CONFIG_64BIT
-	int bit = fls64(eirr);
-#else
-	int bit = fls(eirr);
-#endif
+	int bit = fls_long(eirr);
 	return (BITS_PER_LONG - bit) + TIMER_IRQ;
 }
 
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index f50b982b0834..fdacdd4341c9 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -46,6 +46,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 
 #include <asm/unwind.h>
 
@@ -96,7 +97,7 @@ static inline int in_local_section(struct module *me, void *loc, void *dot)
 }
 
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 struct got_entry {
 	Elf32_Addr addr;
 };
@@ -176,7 +177,7 @@ void *module_alloc(unsigned long size)
 	return vmalloc(size);
 }
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 static inline unsigned long count_gots(const Elf_Rela *rela, unsigned long n)
 {
 	return 0;
@@ -319,7 +320,7 @@ int module_frob_arch_sections(CONST Elf_Ehdr *hdr,
 	return 0;
 }
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 static Elf64_Word get_got(struct module *me, unsigned long value, long addend)
 {
 	unsigned int i;
@@ -342,9 +343,9 @@ static Elf64_Word get_got(struct module *me, unsigned long value, long addend)
 	       value);
 	return i * sizeof(struct got_entry);
 }
-#endif /* __LP64__ */
+#endif /* CONFIG_64BIT */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 static Elf_Addr get_fdesc(struct module *me, unsigned long value)
 {
 	Elf_Fdesc *fdesc = me->module_core + me->arch.fdesc_offset;
@@ -368,7 +369,7 @@ static Elf_Addr get_fdesc(struct module *me, unsigned long value)
 	fdesc->gp = (Elf_Addr)me->module_core + me->arch.got_offset;
 	return (Elf_Addr)fdesc;
 }
-#endif /* __LP64__ */
+#endif /* CONFIG_64BIT */
 
 enum elf_stub_type {
 	ELF_STUB_GOT,
@@ -394,7 +395,7 @@ static Elf_Addr get_stub(struct module *me, unsigned long value, long addend,
 			i * sizeof(struct stub_entry);
 	}
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 /* for 32-bit the stub looks like this:
  * 	ldil L'XXX,%r1
  * 	be,n R'XXX(%sr4,%r1)
@@ -472,7 +473,7 @@ int apply_relocate(Elf_Shdr *sechdrs,
 	return -ENOEXEC;
 }
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 int apply_relocate_add(Elf_Shdr *sechdrs,
 		       const char *strtab,
 		       unsigned int symindex,
@@ -822,7 +823,8 @@ int module_finalize(const Elf_Ehdr *hdr,
 	       me->name, strtab, symhdr);
 
 	if(me->arch.got_count > MAX_GOTS) {
-		printk(KERN_ERR "%s: Global Offset Table overflow (used %ld, allowed %d\n", me->name, me->arch.got_count, MAX_GOTS);
+		printk(KERN_ERR "%s: Global Offset Table overflow (used %ld, allowed %d)\n",
+				me->name, me->arch.got_count, MAX_GOTS);
 		return -EINVAL;
 	}
 	
@@ -850,10 +852,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 	nsyms = newptr - (Elf_Sym *)symhdr->sh_addr;
 	DEBUGP("NEW num_symtab %lu\n", nsyms);
 	symhdr->sh_size = nsyms * sizeof(Elf_Sym);
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
 	deregister_unwind_table(mod);
+	module_bug_cleanup(mod);
 }
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index e81c9937d10a..90b240878520 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -27,31 +27,21 @@
  */
 
 #ifdef CONFIG_64BIT
-#define ADDIB	addib,*
-#define CMPB	cmpb,*
-#define ANDCM	andcm,*
-
 	.level	2.0w
 #else
-#define ADDIB	addib,
-#define CMPB	cmpb,
-#define ANDCM	andcm
-
 	.level	2.0
 #endif
 
-
 #include <asm/psw.h>
 #include <asm/assembly.h>
 #include <asm/pgtable.h>
 #include <asm/cache.h>
+#include <linux/linkage.h>
 
 	.text
 	.align	128
 
-	.export flush_tlb_all_local,code
-
-flush_tlb_all_local:
+ENTRY(flush_tlb_all_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -200,11 +190,11 @@ fdtdone:
 
 	.exit
 	.procend
+ENDPROC(flush_tlb_all_local)
 
-	.export flush_instruction_cache_local,code
 	.import cache_info,data
 
-flush_instruction_cache_local:
+ENTRY(flush_instruction_cache_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -241,11 +231,11 @@ fisync:
 	.exit
 
 	.procend
+ENDPROC(flush_instruction_cache_local)
 
-	.export flush_data_cache_local, code
-	.import cache_info, data
 
-flush_data_cache_local:
+	.import cache_info, data
+ENTRY(flush_data_cache_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -283,11 +273,11 @@ fdsync:
 	.exit
 
 	.procend
+ENDPROC(flush_data_cache_local)
 
-	.export copy_user_page_asm,code
 	.align	16
 
-copy_user_page_asm:
+ENTRY(copy_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -409,6 +399,7 @@ copy_user_page_asm:
 	.exit
 
 	.procend
+ENDPROC(copy_user_page_asm)
 
 /*
  * NOTE: Code in clear_user_page has a hard coded dependency on the
@@ -446,9 +437,7 @@ copy_user_page_asm:
 	 * lobby for such a change.
 	 */
 
-	.export copy_user_page_asm,code
-
-copy_user_page_asm:
+ENTRY(copy_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -534,11 +523,10 @@ copy_user_page_asm:
 	.exit
 
 	.procend
+ENDPROC(copy_user_page_asm)
 #endif
 
-	.export __clear_user_page_asm,code
-
-__clear_user_page_asm:
+ENTRY(__clear_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -618,10 +606,9 @@ __clear_user_page_asm:
 	.exit
 
 	.procend
+ENDPROC(__clear_user_page_asm)
 
-	.export flush_kernel_dcache_page_asm
-
-flush_kernel_dcache_page_asm:
+ENTRY(flush_kernel_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -662,10 +649,9 @@ flush_kernel_dcache_page_asm:
 	.exit
 
 	.procend
+ENDPROC(flush_kernel_dcache_page_asm)
 	
-	.export flush_user_dcache_page
-
-flush_user_dcache_page:
+ENTRY(flush_user_dcache_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -706,10 +692,9 @@ flush_user_dcache_page:
 	.exit
 
 	.procend
+ENDPROC(flush_user_dcache_page)
 
-	.export flush_user_icache_page
-
-flush_user_icache_page:
+ENTRY(flush_user_icache_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -750,11 +735,10 @@ flush_user_icache_page:
 	.exit
 
 	.procend
+ENDPROC(flush_user_icache_page)
 
 
-	.export purge_kernel_dcache_page
-
-purge_kernel_dcache_page:
+ENTRY(purge_kernel_dcache_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -794,15 +778,14 @@ purge_kernel_dcache_page:
 	.exit
 
 	.procend
+ENDPROC(purge_kernel_dcache_page)
 
 #if 0
 	/* Currently not used, but it still is a possible alternate
 	 * solution.
 	 */
 
-	.export flush_alias_page
-
-flush_alias_page:
+ENTRY(flush_alias_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -882,10 +865,9 @@ flush_user_dcache_range_asm:
 	.exit
 
 	.procend
+ENDPROC(flush_alias_page)
 
-	.export flush_kernel_dcache_range_asm
-
-flush_kernel_dcache_range_asm:
+ENTRY(flush_kernel_dcache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -905,10 +887,9 @@ flush_kernel_dcache_range_asm:
 	.exit
 
 	.procend
+ENDPROC(flush_kernel_dcache_range_asm)
 
-	.export flush_user_icache_range_asm
-
-flush_user_icache_range_asm:
+ENTRY(flush_user_icache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -927,10 +908,9 @@ flush_user_icache_range_asm:
 	.exit
 
 	.procend
+ENDPROC(flush_user_icache_range_asm)
 
-	.export flush_kernel_icache_page
-
-flush_kernel_icache_page:
+ENTRY(flush_kernel_icache_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -971,10 +951,9 @@ flush_kernel_icache_page:
 	.exit
 
 	.procend
+ENDPROC(flush_kernel_icache_page)
 
-	.export flush_kernel_icache_range_asm
-
-flush_kernel_icache_range_asm:
+ENTRY(flush_kernel_icache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -992,14 +971,13 @@ flush_kernel_icache_range_asm:
 	nop
 	.exit
 	.procend
+ENDPROC(flush_kernel_icache_range_asm)
 
 	/* align should cover use of rfi in disable_sr_hashing_asm and
 	 * srdis_done.
 	 */
 	.align	256
-	.export disable_sr_hashing_asm,code
-
-disable_sr_hashing_asm:
+ENTRY(disable_sr_hashing_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1088,5 +1066,6 @@ srdis_done:
 	.exit
 
 	.procend
+ENDPROC(disable_sr_hashing_asm)
 
 	.end
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 8f6a0b312f7a..7aca704e96f0 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -7,7 +7,7 @@
  *    Copyright (C) 2001-2003 Grant Grundler <grundler with parisc-linux.org>
  *    Copyright (C) 2002-2003 Matthew Wilcox <willy at parisc-linux.org>
  *    Copyright (C) 2002 Randolph Chung <tausq at parisc-linux.org>
- *    Copyright (C) 2002-2003 Helge Deller <deller with parisc-linux.org>
+ *    Copyright (C) 2002-2007 Helge Deller <deller with parisc-linux.org>
  * 
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -38,7 +38,7 @@ EXPORT_SYMBOL(__cmpxchg_u32);
 #ifdef CONFIG_SMP
 EXPORT_SYMBOL(__atomic_hash);
 #endif
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 EXPORT_SYMBOL(__xchg64);
 EXPORT_SYMBOL(__cmpxchg_u64);
 #endif
@@ -58,7 +58,7 @@ EXPORT_SYMBOL(fixup_get_user_skip_2);
 EXPORT_SYMBOL(fixup_put_user_skip_1);
 EXPORT_SYMBOL(fixup_put_user_skip_2);
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 /* Needed so insmod can set dp value */
 extern int $global$;
 EXPORT_SYMBOL($global$);
@@ -135,7 +135,7 @@ EXPORT_SYMBOL(__muldi3);
 asmlinkage void * __canonicalize_funcptr_for_compare(void *);
 EXPORT_SYMBOL(__canonicalize_funcptr_for_compare);
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 extern void __divdi3(void);
 extern void __udivdi3(void);
 extern void __umoddi3(void);
@@ -147,7 +147,7 @@ EXPORT_SYMBOL(__umoddi3);
 EXPORT_SYMBOL(__moddi3);
 #endif
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 extern void $$dyncall(void);
 EXPORT_SYMBOL($$dyncall);
 #endif
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index a6caf1073085..0c3aecb85a5c 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -342,7 +342,7 @@ pcxl_dma_init(void)
 	pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
 					    get_order(pcxl_res_size));
 	memset(pcxl_res_map, 0, pcxl_res_size);
-	proc_gsc_root = proc_mkdir("gsc", 0);
+	proc_gsc_root = proc_mkdir("gsc", NULL);
 	if (!proc_gsc_root)
     		printk(KERN_WARNING
 			"pcxl_dma_init: Unable to create gsc /proc dir entry\n");
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 199887a61c76..563df0072dee 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -200,8 +200,8 @@ static void
 pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
 {
 	if (!r->parent) {
-		printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
-				r->start, r->end);
+		printk(KERN_EMERG "PCI: resource not parented! [%p-%p]\n",
+				(void*) r->start, (void*) r->end);
 		r->parent = hba_res;
 
 		/* reverse link is harder *sigh*  */
diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S
index 5e7bb90e7e08..43874ca3ed67 100644
--- a/arch/parisc/kernel/perf_asm.S
+++ b/arch/parisc/kernel/perf_asm.S
@@ -20,6 +20,7 @@
  */
 
 #include <asm/assembly.h>
+#include <linux/linkage.h>
 
 #ifdef CONFIG_64BIT
 	.level		2.0w
@@ -41,10 +42,8 @@
 ; starting/stopping the coprocessor with the pmenb/pmdis.
 ;
 	.text
-	.align 32
 
-	.export perf_intrigue_enable_perf_counters,code
-perf_intrigue_enable_perf_counters:
+ENTRY(perf_intrigue_enable_perf_counters)
 	.proc
 	.callinfo  frame=0,NO_CALLS
 	.entry
@@ -69,9 +68,9 @@ perf_intrigue_enable_perf_counters:
 	nop
 	.exit
 	.procend
+ENDPROC(perf_intrigue_enable_perf_counters)
 
-	.export perf_intrigue_disable_perf_counters,code
-perf_intrigue_disable_perf_counters:
+ENTRY(perf_intrigue_disable_perf_counters)
 	.proc
 	.callinfo  frame=0,NO_CALLS
 	.entry
@@ -86,6 +85,7 @@ perf_intrigue_disable_perf_counters:
 	mtctl   %r26,ccr                 ; turn off performance coprocessor
 	.exit
 	.procend
+ENDPROC(perf_intrigue_disable_perf_counters)
 
 ;***********************************************************************
 ;*
@@ -117,8 +117,7 @@ perf_intrigue_disable_perf_counters:
 ;*
 ;***********************************************************************
 
-	.export perf_rdr_shift_in_W,code
-perf_rdr_shift_in_W:
+ENTRY(perf_rdr_shift_in_W)
 	.proc
 	.callinfo frame=0,NO_CALLS
 	.entry
@@ -550,6 +549,7 @@ perf_rdr_shift_in_W_leave:
 	.exit
 	MTDIAG_2	(24)			; restore DR2
 	.procend
+ENDPROC(perf_rdr_shift_in_W)
 
 
 ;***********************************************************************
@@ -575,8 +575,7 @@ perf_rdr_shift_in_W_leave:
 ;*
 ;***********************************************************************
 
-	.export perf_rdr_shift_out_W,code
-perf_rdr_shift_out_W:
+ENTRY(perf_rdr_shift_out_W)
 	.proc
 	.callinfo frame=0,NO_CALLS
 	.entry
@@ -983,6 +982,7 @@ perf_rdr_shift_out_W_leave:
 	.exit
 	MTDIAG_2	(23)			; restore DR2
 	.procend
+ENDPROC(perf_rdr_shift_out_W)
 
 
 ;***********************************************************************
@@ -1012,8 +1012,7 @@ perf_rdr_shift_out_W_leave:
 ;*
 ;***********************************************************************
 
-	.export perf_rdr_shift_in_U,code
-perf_rdr_shift_in_U:
+ENTRY(perf_rdr_shift_in_U)
 	.proc
 	.callinfo frame=0,NO_CALLS
 	.entry
@@ -1343,6 +1342,7 @@ perf_rdr_shift_in_U_leave:
 	.exit
 	MTDIAG_2	(24)			; restore DR2
 	.procend
+ENDPROC(perf_rdr_shift_in_U)
 
 ;***********************************************************************
 ;*
@@ -1369,8 +1369,7 @@ perf_rdr_shift_in_U_leave:
 ;*
 ;***********************************************************************
 
-	.export perf_rdr_shift_out_U,code
-perf_rdr_shift_out_U:
+ENTRY(perf_rdr_shift_out_U)
 	.proc
 	.callinfo frame=0,NO_CALLS
 	.entry
@@ -1687,4 +1686,5 @@ perf_rdr_shift_out_U_leave:
 	.exit
 	MTDIAG_2	(23)			; restore DR2
 	.procend
+ENDPROC(perf_rdr_shift_out_U)
 
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 2f9f9dfa66f7..0dd3847f494c 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -13,7 +13,7 @@
  *    Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
  *    Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
  *    Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
- *    Copyright (C) 2001-2002 Helge Deller <deller at parisc-linux.org>
+ *    Copyright (C) 2001-2007 Helge Deller <deller at parisc-linux.org>
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
  *
  *
@@ -303,7 +303,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		 * Copy function and argument to be called from
 		 * ret_from_kernel_thread.
 		 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		cregs->gr[27] = pregs->gr[27];
 #endif
 		cregs->gr[26] = pregs->gr[26];
@@ -355,8 +355,8 @@ asmlinkage int sys_execve(struct pt_regs *regs)
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename, (char __user **) regs->gr[25],
-		(char __user **) regs->gr[24], regs);
+	error = do_execve(filename, (char __user * __user *) regs->gr[25],
+		(char __user * __user *) regs->gr[24], regs);
 	if (error == 0) {
 		task_lock(current);
 		current->ptrace &= ~PT_DTRACE;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index fb81e5687e7c..dd5d0cb6b347 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -48,6 +48,8 @@ EXPORT_SYMBOL(boot_cpu_data);
 
 struct cpuinfo_parisc cpu_data[NR_CPUS] __read_mostly;
 
+extern int update_cr16_clocksource(void);	/* from time.c */
+
 /*
 **  	PARISC CPU driver - claim "device" and initialize CPU data structures.
 **
@@ -93,7 +95,7 @@ static int __init processor_probe(struct parisc_device *dev)
 	cpuid = boot_cpu_data.cpu_count;
 	txn_addr = dev->hpa.start;	/* for legacy PDC */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if (is_pdc_pat()) {
 		ulong status;
 		unsigned long bytecnt;
@@ -153,8 +155,6 @@ static int __init processor_probe(struct parisc_device *dev)
 	p->cpuid = cpuid;	/* save CPU id */
 	p->txn_addr = txn_addr;	/* save CPU IRQ address */
 #ifdef CONFIG_SMP
-	spin_lock_init(&p->lock);
-
 	/*
 	** FIXME: review if any other initialization is clobbered
 	**	for boot_cpu by the above memset().
@@ -200,6 +200,12 @@ static int __init processor_probe(struct parisc_device *dev)
 	}
 #endif
 
+	/* If we've registered more than one cpu,
+	 * we'll use the jiffies clocksource since cr16
+	 * is not synchronized between CPUs.
+	 */
+	update_cr16_clocksource();
+
 	return 0;
 }
 
@@ -311,11 +317,11 @@ int __init init_per_cpu(int cpunum)
 	} else {
 		printk(KERN_WARNING  "WARNING: No FP CoProcessor?!"
 			" (coproc_cfg.ccr_functional == 0x%lx, expected 0xc0)\n"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 			"Halting Machine - FP required\n"
 #endif
 			, coproc_cfg.ccr_functional);
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		mdelay(100);	/* previous chars get pushed to console */
 		panic("FP CoProc not reported");
 #endif
@@ -339,9 +345,6 @@ show_cpuinfo (struct seq_file *m, void *v)
 #ifdef CONFIG_SMP
 		if (0 == cpu_data[n].hpa)
 			continue;
-#ifdef ENTRY_SYS_CPUS
-#error iCOD support wants to show CPU state here
-#endif
 #endif
 		seq_printf(m, "processor\t: %d\n"
 				"cpu family\t: PA-RISC %s\n",
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 3f28de974556..0d0d617b6f21 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -36,7 +36,7 @@
 #define DBG(x...)
 #endif
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 /* This function is needed to translate 32 bit pt_regs offsets in to
  * 64 bit pt_regs offsets.  For example, a 32 bit gdb under a 64 bit kernel
@@ -90,7 +90,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_PEEKDATA: {
 		int copied;
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		if (__is_compat_task(child)) {
 			unsigned int tmp;
 
@@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_POKETEXT: /* write the word at location addr. */
 	case PTRACE_POKEDATA:
 		ret = 0;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		if (__is_compat_task(child)) {
 			unsigned int tmp = (unsigned int)data;
 			DBG("sys_ptrace(POKE%s, %d, %lx, %lx)\n",
@@ -145,7 +145,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	   processes, the kernel saves all regs on a syscall. */
 	case PTRACE_PEEKUSR: {
 		ret = -EIO;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		if (__is_compat_task(child)) {
 			unsigned int tmp;
 
@@ -204,7 +204,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = 0;
 			goto out_tsk;
 		}
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		if (__is_compat_task(child)) {
 			if (addr & (sizeof(int)-1))
 				goto out_tsk;
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 789061f6ceb4..7a92695d95a6 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -11,6 +11,8 @@
 #include <asm/psw.h>
 #include <asm/assembly.h>
 
+#include <linux/linkage.h>
+
 	.section	.bss
 	.export real_stack
 	.export real32_stack
@@ -39,8 +41,6 @@ save_cr_end:
 
 	.text
 
-	.export real32_call_asm
-
 	/* unsigned long real32_call_asm(unsigned int *sp,
 	 *		unsigned int *arg0p,
 	 *		unsigned int iodc_fn)
@@ -49,7 +49,7 @@ save_cr_end:
 	 *	iodc_fn is the IODC function to call
 	 */
 
-real32_call_asm:
+ENTRY(real32_call_asm)
 	STREG	%rp, -RP_OFFSET(%sp)	/* save RP */
 #ifdef CONFIG_64BIT
 	callee_save
@@ -107,6 +107,7 @@ ric_ret:
 	LDREG	-RP_OFFSET(%sp), %rp	/* restore RP */
 	bv	0(%rp)
 	nop
+ENDPROC(real32_call_asm)
 
 
 #  define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where)
@@ -218,7 +219,6 @@ rfi_r2v_1:
 /************************ 64-bit real-mode calls ***********************/
 /* This is only usable in wide kernels right now and will probably stay so */
 	.text
-	.export real64_call_asm
 	/* unsigned long real64_call_asm(unsigned long *sp,
 	 *		unsigned long *arg0p,
 	 *		unsigned long fn)
@@ -226,7 +226,7 @@ rfi_r2v_1:
 	 *	arg0p points to where saved arg values may be found
 	 *	iodc_fn is the IODC function to call
 	 */
-real64_call_asm:
+ENTRY(real64_call_asm)
 	std	%rp, -0x10(%sp)		/* save RP */
 	std	%sp, -8(%arg0)		/* save SP on real-mode stack */
 	copy	%arg0, %sp		/* adopt the real-mode SP */
@@ -272,19 +272,21 @@ r64_ret:
 	ldd	-0x10(%sp), %rp		/* restore RP */
 	bv	0(%rp)
 	nop
+ENDPROC(real64_call_asm)
 
 #endif
 
-	.export __canonicalize_funcptr_for_compare
 	.text
 	/* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html
 	**	GCC 3.3 and later has a new function in libgcc.a for
 	**	comparing function pointers.
 	*/
-__canonicalize_funcptr_for_compare:
+ENTRY(__canonicalize_funcptr_for_compare)
 #ifdef CONFIG_64BIT
 	bve (%r2)
 #else
 	bv %r0(%r2)
 #endif
 	copy %r26,%r28
+ENDPROC(__canonicalize_funcptr_for_compare)
+
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 74b3686dd1e0..9818919571fd 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <asm/setup.h>
 
-char	__initdata command_line[COMMAND_LINE_SIZE] __read_mostly;
+char	__initdata command_line[COMMAND_LINE_SIZE];
 
 /* Intended for ccio/sba/cpu statistics under /proc/bus/{runway|gsc} */
 struct proc_dir_entry * proc_runway_root __read_mostly = NULL;
@@ -120,13 +120,13 @@ extern void collect_boot_cpu_data(void);
 
 void __init setup_arch(char **cmdline_p)
 {
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extern int parisc_narrow_firmware;
 #endif
 
 	init_per_cpu(smp_processor_id());	/* Set Modes & Enable FP */
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	printk(KERN_INFO "The 64-bit Kernel has started...\n");
 #else
 	printk(KERN_INFO "The 32-bit Kernel has started...\n");
@@ -134,7 +134,7 @@ void __init setup_arch(char **cmdline_p)
 
 	pdc_console_init();
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if(parisc_narrow_firmware) {
 		printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n");
 	}
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index ee6653edeb7a..9784e405f849 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -59,58 +59,13 @@
  * this. */
 #define A(__x)	((unsigned long)(__x))
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall);
-
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #include "sys32.h"
 #endif
 
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-#ifdef __LP64__
-	compat_sigset_t newset32;
-
-	if (is_compat_task()) {
-		/* XXX: Don't preclude handling different sized sigset_t's.  */
-		if (sigsetsize != sizeof(compat_sigset_t))
-			return -EINVAL;
-		if (copy_from_user(&newset32, (compat_sigset_t __user *)unewset, sizeof(newset32)))
-			return -EFAULT;
-		sigset_32to64(&newset,&newset32);
-		
-	} else 
-#endif
-	{
-		/* XXX: Don't preclude handling different sized sigset_t's.  */
-		if (sigsetsize != sizeof(sigset_t))
-			return -EINVAL;
-	
-		if (copy_from_user(&newset, unewset, sizeof(newset)))
-			return -EFAULT;
-	}
-
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gr[28] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 1))
-			return -EINTR;
-	}
-}
-
 /*
  * Do a signal return - restore sigcontext.
  */
@@ -148,7 +103,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	sigset_t set;
 	unsigned long usp = (regs->gr[30] & ~(0x01UL));
 	unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	compat_sigset_t compat_set;
 	struct compat_rt_sigframe __user * compat_frame;
 	
@@ -162,7 +117,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 		(usp - sigframe_size);
 	DBG(2,"sys_rt_sigreturn: frame is %p\n", frame);
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	compat_frame = (struct compat_rt_sigframe __user *)frame;
 	
 	if (is_compat_task()) {
@@ -184,7 +139,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	spin_unlock_irq(&current->sighand->siglock);
 
 	/* Good thing we saved the old gr[30], eh? */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if (is_compat_task()) {
 		DBG(1,"sys_rt_sigreturn: compat_frame->uc.uc_mcontext 0x%p\n",
 				&compat_frame->uc.uc_mcontext);
@@ -296,7 +251,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	unsigned long rp, usp;
 	unsigned long haddr, sigframe_size;
 	int err = 0;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	compat_int_t compat_val;
 	struct compat_rt_sigframe __user * compat_frame;
 	compat_sigset_t compat_set;
@@ -310,7 +265,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	DBG(1,"setup_rt_frame: frame %p info %p\n", frame, info);
 
 	
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 
 	compat_frame = (struct compat_rt_sigframe __user *)frame;
 	
@@ -390,7 +345,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	haddr = A(ka->sa.sa_handler);
 	/* The sa_handler may be a pointer to a function descriptor */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if (is_compat_task()) {
 #endif
 		if (haddr & PA_PLABEL_FDESC) {
@@ -405,7 +360,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			haddr = fdesc.addr;
 			regs->gr[19] = fdesc.gp;
 		}
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	} else {
 		Elf64_Fdesc fdesc;
 		Elf64_Fdesc __user *ufdesc = (Elf64_Fdesc __user *)A(haddr & ~3);
@@ -425,19 +380,19 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	/* The syscall return path will create IAOQ values from r31.
 	 */
 	sigframe_size = PARISC_RT_SIGFRAME_SIZE;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if (is_compat_task())
 		sigframe_size = PARISC_RT_SIGFRAME_SIZE32;
 #endif
 	if (in_syscall) {
 		regs->gr[31] = haddr;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		if (!test_thread_flag(TIF_32BIT))
 			sigframe_size |= 1;
 #endif
 	} else {
 		unsigned long psw = USER_PSW;
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		if (!test_thread_flag(TIF_32BIT))
 			psw |= PSW_W;
 #endif
@@ -462,7 +417,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->gr[2]  = rp;                /* userland return pointer */
 	regs->gr[26] = sig;               /* signal number */
 	
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	if (is_compat_task()) {
 		regs->gr[25] = A(&compat_frame->info); /* siginfo pointer */
 		regs->gr[24] = A(&compat_frame->uc);   /* ucontext pointer */
@@ -516,6 +471,97 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	return 1;
 }
 
+static inline void
+syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
+{
+	/* Check the return code */
+	switch (regs->gr[28]) {
+	case -ERESTART_RESTARTBLOCK:
+		current_thread_info()->restart_block.fn =
+			do_no_restart_syscall;
+	case -ERESTARTNOHAND:
+		DBG(1,"ERESTARTNOHAND: returning -EINTR\n");
+		regs->gr[28] = -EINTR;
+		break;
+
+	case -ERESTARTSYS:
+		if (!(ka->sa.sa_flags & SA_RESTART)) {
+			DBG(1,"ERESTARTSYS: putting -EINTR\n");
+			regs->gr[28] = -EINTR;
+			break;
+		}
+		/* fallthrough */
+	case -ERESTARTNOINTR:
+		/* A syscall is just a branch, so all
+		 * we have to do is fiddle the return pointer.
+		 */
+		regs->gr[31] -= 8; /* delayed branching */
+		/* Preserve original r28. */
+		regs->gr[28] = regs->orig_r28;
+		break;
+	}
+}
+
+static inline void
+insert_restart_trampoline(struct pt_regs *regs)
+{
+	switch(regs->gr[28]) {
+	case -ERESTART_RESTARTBLOCK: {
+		/* Restart the system call - no handlers present */
+		unsigned int *usp = (unsigned int *)regs->gr[30];
+
+		/* Setup a trampoline to restart the syscall
+		 * with __NR_restart_syscall
+		 *
+		 *  0: <return address (orig r31)>
+		 *  4: <2nd half for 64-bit>
+		 *  8: ldw 0(%sp), %r31
+		 * 12: be 0x100(%sr2, %r0)
+		 * 16: ldi __NR_restart_syscall, %r20
+		 */
+#ifdef CONFIG_64BIT
+		put_user(regs->gr[31] >> 32, &usp[0]);
+		put_user(regs->gr[31] & 0xffffffff, &usp[1]);
+		put_user(0x0fc010df, &usp[2]);
+#else
+		put_user(regs->gr[31], &usp[0]);
+		put_user(0x0fc0109f, &usp[2]);
+#endif
+		put_user(0xe0008200, &usp[3]);
+		put_user(0x34140000, &usp[4]);
+
+		/* Stack is 64-byte aligned, and we only need
+		 * to flush 1 cache line.
+		 * Flushing one cacheline is cheap.
+		 * "sync" on bigger (> 4 way) boxes is not.
+		 */
+		flush_icache_range(regs->gr[30], regs->gr[30] + 4);
+
+		regs->gr[31] = regs->gr[30] + 8;
+		/* Preserve original r28. */
+		regs->gr[28] = regs->orig_r28;
+
+		return;
+	}
+	case -ERESTARTNOHAND:
+	case -ERESTARTSYS:
+	case -ERESTARTNOINTR: {
+		/* Hooray for delayed branching.  We don't
+		 * have to restore %r20 (the system call
+		 * number) because it gets loaded in the delay
+		 * slot of the branch external instruction.
+		 */
+		regs->gr[31] -= 8;
+		/* Preserve original r28. */
+		regs->gr[28] = regs->orig_r28;
+
+		return;
+	}
+	default:
+		break;
+	}
+}
+
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -527,13 +573,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
  * registers).  As noted below, the syscall number gets restored for
  * us due to the magic of delayed branching.
  */
-
-asmlinkage int
-do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
+asmlinkage void
+do_signal(struct pt_regs *regs, long in_syscall)
 {
 	siginfo_t info;
 	struct k_sigaction ka;
 	int signr;
+	sigset_t *oldset;
 
 	DBG(1,"\ndo_signal: oldset=0x%p, regs=0x%p, sr7 %#lx, in_syscall=%d\n",
 	       oldset, regs, regs->sr[7], in_syscall);
@@ -543,7 +589,9 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
 	   we would be called in that case, but for some reason we
 	   are. */
 
-	if (!oldset)
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	DBG(1,"do_signal: oldset %08lx / %08lx\n", 
@@ -560,98 +608,41 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
 		  break;
 		
 		/* Restart a system call if necessary. */
-		if (in_syscall) {
-			/* Check the return code */
-			switch (regs->gr[28]) {
-		        case -ERESTART_RESTARTBLOCK:
-				current_thread_info()->restart_block.fn = do_no_restart_syscall;
-			case -ERESTARTNOHAND:
-				DBG(1,"ERESTARTNOHAND: returning -EINTR\n");
-				regs->gr[28] = -EINTR;
-				break;
-
-			case -ERESTARTSYS:
-				if (!(ka.sa.sa_flags & SA_RESTART)) {
-					DBG(1,"ERESTARTSYS: putting -EINTR\n");
-					regs->gr[28] = -EINTR;
-					break;
-				}
-			/* fallthrough */
-			case -ERESTARTNOINTR:
-				/* A syscall is just a branch, so all
-				   we have to do is fiddle the return pointer. */
-				regs->gr[31] -= 8; /* delayed branching */
-				/* Preserve original r28. */
-				regs->gr[28] = regs->orig_r28;
-				break;
-			}
-		}
+		if (in_syscall)
+			syscall_restart(regs, &ka);
+
 		/* Whee!  Actually deliver the signal.  If the
 		   delivery failed, we need to continue to iterate in
 		   this loop so we can deliver the SIGSEGV... */
-		if (handle_signal(signr, &info, &ka, oldset, regs, in_syscall)) {
+		if (handle_signal(signr, &info, &ka, oldset,
+				  regs, in_syscall)) {
 			DBG(1,KERN_DEBUG "do_signal: Exit (success), regs->gr[28] = %ld\n",
 				regs->gr[28]);
-			return 1;
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+			return;
 		}
 	}
 	/* end of while(1) looping forever if we can't force a signal */
 
 	/* Did we come from a system call? */
-	if (in_syscall) {
-		/* Restart the system call - no handlers present */
-		if (regs->gr[28] == -ERESTART_RESTARTBLOCK) {
-			unsigned int *usp = (unsigned int *)regs->gr[30];
-
-			/* Setup a trampoline to restart the syscall
-			 * with __NR_restart_syscall
-			 *
-			 *  0: <return address (orig r31)>
-			 *  4: <2nd half for 64-bit>
-			 *  8: ldw 0(%sp), %r31
-			 * 12: be 0x100(%sr2, %r0)
-			 * 16: ldi __NR_restart_syscall, %r20
-			 */
-#ifndef __LP64__
-			put_user(regs->gr[31], &usp[0]);
-			put_user(0x0fc0109f, &usp[2]);
-#else
-			put_user(regs->gr[31] >> 32, &usp[0]);
-			put_user(regs->gr[31] & 0xffffffff, &usp[1]);
-			put_user(0x0fc010df, &usp[2]);
-#endif
-			put_user(0xe0008200, &usp[3]);
-			put_user(0x34140000, &usp[4]);
-
-			/* Stack is 64-byte aligned, and we only need
-			 * to flush 1 cache line.
-			 * Flushing one cacheline is cheap.
-			 * "sync" on bigger (> 4 way) boxes is not.
-			 */
-			asm("fdc %%r0(%%sr3, %0)\n"
-			    "sync\n"
-			    "fic %%r0(%%sr3, %0)\n"
-			    "sync\n"
-			    : : "r"(regs->gr[30]));
-
-			regs->gr[31] = regs->gr[30] + 8;
-			/* Preserve original r28. */
-			regs->gr[28] = regs->orig_r28;
-		} else if (regs->gr[28] == -ERESTARTNOHAND ||
-		           regs->gr[28] == -ERESTARTSYS ||
-		           regs->gr[28] == -ERESTARTNOINTR) {
-			/* Hooray for delayed branching.  We don't
-                           have to restore %r20 (the system call
-                           number) because it gets loaded in the delay
-                           slot of the branch external instruction. */
-			regs->gr[31] -= 8;
-			/* Preserve original r28. */
-			regs->gr[28] = regs->orig_r28;
-		}
-	}
+	if (in_syscall)
+		insert_restart_trampoline(regs);
 	
 	DBG(1,"do_signal: Exit (not delivered), regs->gr[28] = %ld\n", 
 		regs->gr[28]);
 
-	return 0;
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
+	return;
+}
+
+void do_notify_resume(struct pt_regs *regs, long in_syscall)
+{
+	if (test_thread_flag(TIF_SIGPENDING) ||
+	    test_thread_flag(TIF_RESTORE_SIGMASK))
+		do_signal(regs, in_syscall);
 }
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index a6b4231cafa1..1c1a37f73053 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -1,6 +1,8 @@
 /*    Signal support for 32-bit kernel builds
  *
  *    Copyright (C) 2001 Matthew Wilcox <willy at parisc-linux.org>
+ *    Copyright (C) 2006 Kyle McMartin <kyle at parisc-linux.org>
+ *
  *    Code was mostly borrowed from kernel/signal.c.
  *    See kernel/signal.c for additional Copyrights.
  *
@@ -401,7 +403,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __
 int
 copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
 {
-	unsigned long tmp;
+	compat_uptr_t addr;
 	int err;
 
 	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
@@ -424,8 +426,8 @@ copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
 			err |= __get_user(to->si_uid, &from->si_uid);
 			break;
 		      case __SI_FAULT >> 16:
-			err |= __get_user(tmp, &from->si_addr);
-			to->si_addr = (void __user *) tmp;
+			err |= __get_user(addr, &from->si_addr);
+			to->si_addr = compat_ptr(addr);
 			break;
 		      case __SI_POLL >> 16:
 			err |= __get_user(to->si_band, &from->si_band);
@@ -445,7 +447,8 @@ copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
 int
 copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
 {
-	unsigned int addr;
+	compat_uptr_t addr;
+	compat_int_t val;
 	int err;
 
 	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
@@ -474,8 +477,8 @@ copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
 			err |= __put_user(from->si_uid, &to->si_uid);
 			break;
 		case __SI_FAULT >> 16:
-			/* avoid type-checking warnings by copying _pad[0] in lieu of si_addr... */
-			err |= __put_user(from->_sifields._pad[0], &to->si_addr);
+			addr = ptr_to_compat(from->si_addr);
+			err |= __put_user(addr, &to->si_addr);
 			break;
 		case __SI_POLL >> 16:
 			err |= __put_user(from->si_band, &to->si_band);
@@ -484,17 +487,36 @@ copy_siginfo_to_user32 (compat_siginfo_t __user *to, siginfo_t *from)
 		case __SI_TIMER >> 16:
 			err |= __put_user(from->si_tid, &to->si_tid);
 			err |= __put_user(from->si_overrun, &to->si_overrun);
-			addr = (unsigned long) from->si_ptr;
-			err |= __put_user(addr, &to->si_ptr);
+			val = (compat_int_t)from->si_int;
+			err |= __put_user(val, &to->si_int);
 			break;
 		case __SI_RT >> 16:	/* Not generated by the kernel as of now.  */
 		case __SI_MESGQ >> 16:
 			err |= __put_user(from->si_uid, &to->si_uid);
 			err |= __put_user(from->si_pid, &to->si_pid);
-			addr = (unsigned long) from->si_ptr;
-			err |= __put_user(addr, &to->si_ptr);
+			val = (compat_int_t)from->si_int;
+			err |= __put_user(val, &to->si_int);
 			break;
 		}
 	}
 	return err;
 }
+
+asmlinkage long compat_sys_rt_sigqueueinfo(int pid, int sig,
+	struct compat_siginfo __user *uinfo)
+{
+	siginfo_t info;
+
+	if (copy_siginfo_from_user32(&info, uinfo))
+		return -EFAULT;
+
+	/* Not even root can pretend to send signals from the kernel.
+	   Nor can they impersonate a kill(), which adds source info.  */
+	if (info.si_code >= 0)
+		return -EPERM;
+	info.si_signo = sig;
+
+	/* POSIX.1b doesn't mention process groups.  */
+	return kill_proc_info(sig, &info, pid);
+}
+
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 12cc019307ad..6ba9257fdb7f 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -16,9 +16,6 @@
 **      the Free Software Foundation; either version 2 of the License, or
 **      (at your option) any later version.
 */
-#undef ENTRY_SYS_CPUS	/* syscall support for iCOD-like functionality */
-
-
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
@@ -51,7 +48,15 @@
 #include <asm/unistd.h>
 #include <asm/cacheflush.h>
 
-#define kDEBUG 0
+#undef DEBUG_SMP
+#ifdef DEBUG_SMP
+static int smp_debug_lvl = 0;
+#define smp_debug(lvl, printargs...)		\
+		if (lvl >= smp_debug_lvl)	\
+			printk(printargs);
+#else
+#define smp_debug(lvl, ...)
+#endif /* DEBUG_SMP */
 
 DEFINE_SPINLOCK(smp_lock);
 
@@ -76,6 +81,7 @@ cpumask_t cpu_possible_map __read_mostly = CPU_MASK_ALL;	/* Bitmap of Present CP
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 
+DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED;
 
 struct smp_call_struct {
 	void (*func) (void *info);
@@ -107,13 +113,6 @@ enum ipi_message_type {
 static void
 ipi_init(int cpuid)
 {
-
-	/* If CPU is present ... */
-#ifdef ENTRY_SYS_CPUS
-	/* *and* running (not stopped) ... */
-#error iCOD support wants state checked here.
-#endif
-
 #error verify IRQ_OFFSET(IPI_IRQ) is ipi_interrupt() in new IRQ region
 
 	if(cpu_online(cpuid) )
@@ -133,23 +132,12 @@ ipi_init(int cpuid)
 static void
 halt_processor(void) 
 {
-#ifdef ENTRY_SYS_CPUS
-#error halt_processor() needs rework
-/*
-** o migrate I/O interrupts off this CPU.
-** o leave IPI enabled - __cli() will disable IPI.
-** o leave CPU in online map - just change the state
-*/
-	cpu_data[this_cpu].state = STATE_STOPPED;
-	mark_bh(IPI_BH);
-#else
 	/* REVISIT : redirect I/O Interrupts to another CPU? */
 	/* REVISIT : does PM *know* this CPU isn't available? */
 	cpu_clear(smp_processor_id(), cpu_online_map);
 	local_irq_disable();
 	for (;;)
 		;
-#endif
 }
 
 
@@ -167,10 +155,11 @@ ipi_interrupt(int irq, void *dev_id)
 	mb();	/* Order interrupt and bit testing. */
 
 	for (;;) {
-		spin_lock_irqsave(&(p->lock),flags);
+		spinlock_t *lock = &per_cpu(ipi_lock, this_cpu);
+		spin_lock_irqsave(lock, flags);
 		ops = p->pending_ipi;
 		p->pending_ipi = 0;
-		spin_unlock_irqrestore(&(p->lock),flags);
+		spin_unlock_irqrestore(lock, flags);
 
 		mb(); /* Order bit clearing and data access. */
 
@@ -184,15 +173,11 @@ ipi_interrupt(int irq, void *dev_id)
 
 			switch (which) {
 			case IPI_NOP:
-#if (kDEBUG>=100)
-				printk(KERN_DEBUG "CPU%d IPI_NOP\n",this_cpu);
-#endif /* kDEBUG */
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_NOP\n", this_cpu);
 				break;
 				
 			case IPI_RESCHEDULE:
-#if (kDEBUG>=100)
-				printk(KERN_DEBUG "CPU%d IPI_RESCHEDULE\n",this_cpu);
-#endif /* kDEBUG */
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_RESCHEDULE\n", this_cpu);
 				/*
 				 * Reschedule callback.  Everything to be
 				 * done is done by the interrupt return path.
@@ -200,9 +185,7 @@ ipi_interrupt(int irq, void *dev_id)
 				break;
 
 			case IPI_CALL_FUNC:
-#if (kDEBUG>=100)
-				printk(KERN_DEBUG "CPU%d IPI_CALL_FUNC\n",this_cpu);
-#endif /* kDEBUG */
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC\n", this_cpu);
 				{
 					volatile struct smp_call_struct *data;
 					void (*func)(void *info);
@@ -233,28 +216,16 @@ ipi_interrupt(int irq, void *dev_id)
 				break;
 
 			case IPI_CPU_START:
-#if (kDEBUG>=100)
-				printk(KERN_DEBUG "CPU%d IPI_CPU_START\n",this_cpu);
-#endif /* kDEBUG */
-#ifdef ENTRY_SYS_CPUS
-				p->state = STATE_RUNNING;
-#endif
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_START\n", this_cpu);
 				break;
 
 			case IPI_CPU_STOP:
-#if (kDEBUG>=100)
-				printk(KERN_DEBUG "CPU%d IPI_CPU_STOP\n",this_cpu);
-#endif /* kDEBUG */
-#ifdef ENTRY_SYS_CPUS
-#else
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_STOP\n", this_cpu);
 				halt_processor();
-#endif
 				break;
 
 			case IPI_CPU_TEST:
-#if (kDEBUG>=100)
-				printk(KERN_DEBUG "CPU%d is alive!\n",this_cpu);
-#endif /* kDEBUG */
+				smp_debug(100, KERN_DEBUG "CPU%d is alive!\n", this_cpu);
 				break;
 
 			default:
@@ -275,12 +246,13 @@ static inline void
 ipi_send(int cpu, enum ipi_message_type op)
 {
 	struct cpuinfo_parisc *p = &cpu_data[cpu];
+	spinlock_t *lock = &per_cpu(ipi_lock, cpu);
 	unsigned long flags;
 
-	spin_lock_irqsave(&(p->lock),flags);
+	spin_lock_irqsave(lock, flags);
 	p->pending_ipi |= 1 << op;
 	gsc_writel(IPI_IRQ - CPU_IRQ_BASE, cpu_data[cpu].hpa);
-	spin_unlock_irqrestore(&(p->lock),flags);
+	spin_unlock_irqrestore(lock, flags);
 }
 
 
@@ -560,13 +532,8 @@ int __init smp_boot_one_cpu(int cpuid)
 
 alive:
 	/* Remember the Slave data */
-#if (kDEBUG>=100)
-	printk(KERN_DEBUG "SMP: CPU:%d came alive after %ld _us\n",
+	smp_debug(100, KERN_DEBUG "SMP: CPU:%d came alive after %ld _us\n",
 		cpuid, timeout * 100);
-#endif /* kDEBUG */
-#ifdef ENTRY_SYS_CPUS
-	cpu_data[cpuid].state = STATE_RUNNING;
-#endif
 	return 0;
 }
 
@@ -574,10 +541,6 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 	int bootstrap_processor=cpu_data[0].cpuid;	/* CPU ID of BSP */
 
-#ifdef ENTRY_SYS_CPUS
-	cpu_data[0].state = STATE_RUNNING;
-#endif
-
 	/* Setup BSP mappings */
 	printk("SMP: bootstrap CPU ID is %d\n",bootstrap_processor);
 
@@ -616,101 +579,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return cpu_online(cpu) ? 0 : -ENOSYS;
 }
 
-
-
-#ifdef ENTRY_SYS_CPUS
-/* Code goes along with:
-**    entry.s:        ENTRY_NAME(sys_cpus)   / * 215, for cpu stat * /
-*/
-int sys_cpus(int argc, char **argv)
-{
-	int i,j=0;
-	extern int current_pid(int cpu);
-
-	if( argc > 2 ) {
-		printk("sys_cpus:Only one argument supported\n");
-		return (-1);
-	}
-	if ( argc == 1 ){
-	
-#ifdef DUMP_MORE_STATE
-		for_each_online_cpu(i) {
-			int cpus_per_line = 4;
-
-			if (j++ % cpus_per_line)
-				printk(" %3d",i);
-			else
-				printk("\n %3d",i);
-		}
-		printk("\n"); 
-#else
-	    	printk("\n 0\n"); 
-#endif
-	} else if((argc==2) && !(strcmp(argv[1],"-l"))) {
-		printk("\nCPUSTATE  TASK CPUNUM CPUID HARDCPU(HPA)\n");
-#ifdef DUMP_MORE_STATE
-		for_each_online_cpu(i) {
-			if (cpu_data[i].cpuid != NO_PROC_ID) {
-				switch(cpu_data[i].state) {
-					case STATE_RENDEZVOUS:
-						printk("RENDEZVS ");
-						break;
-					case STATE_RUNNING:
-						printk((current_pid(i)!=0) ? "RUNNING  " : "IDLING   ");
-						break;
-					case STATE_STOPPED:
-						printk("STOPPED  ");
-						break;
-					case STATE_HALTED:
-						printk("HALTED   ");
-						break;
-					default:
-						printk("%08x?", cpu_data[i].state);
-						break;
-				}
-				if(cpu_online(i)) {
-					printk(" %4d",current_pid(i));
-				}	
-				printk(" %6d",cpu_number_map(i));
-				printk(" %5d",i);
-				printk(" 0x%lx\n",cpu_data[i].hpa);
-			}	
-		}
-#else
-		printk("\n%s  %4d      0     0 --------",
-			(current->pid)?"RUNNING ": "IDLING  ",current->pid); 
-#endif
-	} else if ((argc==2) && !(strcmp(argv[1],"-s"))) { 
-#ifdef DUMP_MORE_STATE
-     		printk("\nCPUSTATE   CPUID\n");
-		for_each_online_cpu(i) {
-			if (cpu_data[i].cpuid != NO_PROC_ID) {
-				switch(cpu_data[i].state) {
-					case STATE_RENDEZVOUS:
-						printk("RENDEZVS");break;
-					case STATE_RUNNING:
-						printk((current_pid(i)!=0) ? "RUNNING " : "IDLING");
-						break;
-					case STATE_STOPPED:
-						printk("STOPPED ");break;
-					case STATE_HALTED:
-						printk("HALTED  ");break;
-					default:
-				}
-				printk("  %5d\n",i);
-			}	
-		}
-#else
-		printk("\n%s    CPU0",(current->pid==0)?"RUNNING ":"IDLING  "); 
-#endif
-	} else {
-		printk("sys_cpus:Unknown request\n");
-		return (-1);
-	}
-	return 0;
-}
-#endif /* ENTRY_SYS_CPUS */
-
 #ifdef CONFIG_PROC_FS
 int __init
 setup_profiling_timer(unsigned int multiplier)
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index a05800429304..10859f53e94f 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -12,27 +12,23 @@
 #include <asm/errno.h>
 #include <asm/psw.h>
 #include <asm/thread_info.h>
-
 #include <asm/assembly.h>
 #include <asm/processor.h>
 
+#include <linux/linkage.h>
+
 	/* We fill the empty parts of the gateway page with
  	 * something that will kill the kernel or a
  	 * userspace application.
 	 */
 #define KILL_INSN	break	0,0
 
-#ifdef CONFIG_64BIT
-	.level          2.0w
-#else
-	.level		1.1
-#endif
+	.level          LEVEL
 
 	.text
 
 	.import syscall_exit,code
 	.import syscall_exit_rfi,code
-	.export linux_gateway_page
 
 	/* Linux gateway page is aliased to virtual page 0 in the kernel
 	 * address space. Since it is a gateway page it cannot be
@@ -43,7 +39,7 @@
 	 */
 
 	.align ASM_PAGE_SIZE
-linux_gateway_page:
+ENTRY(linux_gateway_page)
 
         /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */
 	.rept 44
@@ -595,73 +591,43 @@ cas_action:
 	   the other for the store. Either return -EFAULT.
 	   Each of the entries must be relocated. */
 	.section __ex_table,"aw"
-#ifdef CONFIG_64BIT
-	/* Pad the address calculation */
-	.word	0,(2b - linux_gateway_page)
-	.word	0,(3b - linux_gateway_page)
-#else
-	.word	(2b - linux_gateway_page)
-	.word	(3b - linux_gateway_page)
-#endif
+	ASM_ULONG_INSN (1b - linux_gateway_page), (3b - linux_gateway_page)
+	ASM_ULONG_INSN (2b - linux_gateway_page), (3b - linux_gateway_page)
 	.previous
 
-	.section __ex_table,"aw"
-#ifdef CONFIG_64BIT
-	/* Pad the address calculation */
-	.word	0,(1b - linux_gateway_page)
-	.word	0,(3b - linux_gateway_page)
-#else
-	.word	(1b - linux_gateway_page)
-	.word	(3b - linux_gateway_page)
-#endif
-	.previous
-
-end_compare_and_swap:
 
 	/* Make sure nothing else is placed on this page */
 	.align ASM_PAGE_SIZE
-	.export end_linux_gateway_page
-end_linux_gateway_page:
+END(linux_gateway_page)
+ENTRY(end_linux_gateway_page)
 
 	/* Relocate symbols assuming linux_gateway_page is mapped
 	   to virtual address 0x0 */
-#ifdef CONFIG_64BIT
-	/* FIXME: The code will always be on the gateay page
-		  and thus it will be on the first 4k, the
-		  assembler seems to think that the final
-		  subtraction result is only a word in
-		  length, so we pad the value.
-	*/
-#define LWS_ENTRY(_name_) .word 0,(lws_##_name_ - linux_gateway_page)
-#else
-#define LWS_ENTRY(_name_) .word  (lws_##_name_ - linux_gateway_page)
-#endif
+
+#define LWS_ENTRY(_name_) ASM_ULONG_INSN (lws_##_name_ - linux_gateway_page)
 
 	.section .rodata,"a"
 
 	.align ASM_PAGE_SIZE
 	/* Light-weight-syscall table */
 	/* Start of lws table. */
-	.export lws_table
-.Llws_table:
-lws_table:
+ENTRY(lws_table)
 	LWS_ENTRY(compare_and_swap32)	/* 0 - ELF32 Atomic compare and swap */
 	LWS_ENTRY(compare_and_swap64)	/* 1 - ELF64 Atomic compare and swap */
+END(lws_table)
 	/* End of lws table */
 
 	.align ASM_PAGE_SIZE
-	.export sys_call_table
-.Lsys_call_table:
-sys_call_table:
+ENTRY(sys_call_table)
 #include "syscall_table.S"
+END(sys_call_table)
 
 #ifdef CONFIG_64BIT
 	.align ASM_PAGE_SIZE
-	.export sys_call_table64
-.Lsys_call_table64:
-sys_call_table64:
+ENTRY(sys_call_table64)
 #define SYSCALL_TABLE_64BIT
 #include "syscall_table.S"
+END(sys_call_table64)
 #endif
 
 #ifdef CONFIG_SMP
@@ -671,9 +637,7 @@ sys_call_table64:
 	*/
 	.section .data
 	.align 4096
-	.export lws_lock_start
-.Llws_lock_start:
-lws_lock_start:
+ENTRY(lws_lock_start)
 	/* lws locks */
 	.align 16
 	.rept 16
@@ -683,6 +647,7 @@ lws_lock_start:
 	.word 0
 	.word 0
 	.endr
+END(lws_lock_start)
 	.previous
 #endif
 /* CONFIG_SMP for lws_lock_start */
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index be8eb9a0d24a..8bf87e5d9c37 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -10,7 +10,7 @@
  *    Copyright (C) 2000 Grant Grundler <grundler at parisc-linux.org>
  *    Copyright (C) 2001 Richard Hirst <rhirst with parisc-linux.org>
  *    Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
- *    Copyright (C) 2001 Helge Deller <deller at parisc-linux.org>
+ *    Copyright (C) 2001-2007 Helge Deller <deller at parisc-linux.org>
  *    Copyright (C) 2000-2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org>
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
  *    Copyright (C) 2005-2006 Kyle McMartin <kyle at parisc-linux.org>
@@ -282,8 +282,8 @@
 	 * to worry about faulting trying to copy in a larger 64-bit
 	 * struct from a 32-bit user-space app.
 	 */
-	ENTRY_SAME(rt_sigqueueinfo)
-	ENTRY_SAME(rt_sigsuspend_wrapper) /* not really SAME -- see the code */
+	ENTRY_COMP(rt_sigqueueinfo)
+	ENTRY_COMP(rt_sigsuspend)
 	ENTRY_SAME(chown)		/* 180 */
 	/* setsockopt() used by iptables: SO_SET_REPLACE/SO_SET_ADD_COUNTERS */
 	ENTRY_COMP(setsockopt)
@@ -377,9 +377,9 @@
 	ENTRY_SAME(inotify_init)
 	ENTRY_SAME(inotify_add_watch)	/* 270 */
 	ENTRY_SAME(inotify_rm_watch)
-	ENTRY_SAME(ni_syscall)		/* 271 ENTRY_COMP(pselect6) */
-	ENTRY_SAME(ni_syscall)		/* 272 ENTRY_COMP(ppoll) */
 	ENTRY_SAME(migrate_pages)
+	ENTRY_COMP(pselect6)
+	ENTRY_COMP(ppoll)
 	ENTRY_COMP(openat)		/* 275 */
 	ENTRY_SAME(mkdirat)
 	ENTRY_SAME(mknodat)
@@ -399,5 +399,11 @@
 	ENTRY_SAME(splice)
 	ENTRY_OURS(sync_file_range)
 	ENTRY_SAME(tee)
+	ENTRY_COMP(vmsplice)
+	ENTRY_COMP(move_pages)		/* 295 */
+	ENTRY_SAME(getcpu)
+	ENTRY_SAME(epoll_pwait)
+	ENTRY_COMP(statfs64)
+	ENTRY_COMP(fstatfs64)
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 5f1b51af06a9..07a991aa9b0c 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/profile.h>
+#include <linux/clocksource.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -98,7 +99,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	 * cycles after the IT fires. But it's arbitrary how much time passes
 	 * before we call it "late". I've picked one second.
 	 */
-	if (ticks_elapsed > HZ) {
+	if (unlikely(ticks_elapsed > HZ)) {
 		/* Scenario 3: very long delay?  bad in any case */
 		printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!"
 			" cycles %lX rem %lX "
@@ -147,10 +148,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 		write_sequnlock(&xtime_lock);
 	}
 
-	/* check soft power switch status */
-	if (cpu == 0 && !atomic_read(&power_tasklet.count))
-		tasklet_schedule(&power_tasklet);
-
 	return IRQ_HANDLED;
 }
 
@@ -172,121 +169,43 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 
 
-/*
- * Return the number of micro-seconds that elapsed since the last
- * update to wall time (aka xtime).  The xtime_lock
- * must be at least read-locked when calling this routine.
- */
-static inline unsigned long gettimeoffset (void)
-{
-#ifndef CONFIG_SMP
-	/*
-	 * FIXME: This won't work on smp because jiffies are updated by cpu 0.
-	 *    Once parisc-linux learns the cr16 difference between processors,
-	 *    this could be made to work.
-	 */
-	unsigned long now;
-	unsigned long prev_tick;
-	unsigned long next_tick;
-	unsigned long elapsed_cycles;
-	unsigned long usec;
-	unsigned long cpuid = smp_processor_id();
-	unsigned long cpt = clocktick;
-
-	next_tick = cpu_data[cpuid].it_value;
-	now = mfctl(16);	/* Read the hardware interval timer.  */
-
-	prev_tick = next_tick - cpt;
-
-	/* Assume Scenario 1: "now" is later than prev_tick.  */
-	elapsed_cycles = now - prev_tick;
-
-/* aproximate HZ with shifts. Intended math is "(elapsed/clocktick) > HZ" */
-#if HZ == 1000
-	if (elapsed_cycles > (cpt << 10) )
-#elif HZ == 250
-	if (elapsed_cycles > (cpt << 8) )
-#elif HZ == 100
-	if (elapsed_cycles > (cpt << 7) )
-#else
-#warn WTF is HZ set to anyway?
-	if (elapsed_cycles > (HZ * cpt) )
-#endif
-	{
-		/* Scenario 3: clock ticks are missing. */
-		printk (KERN_CRIT "gettimeoffset(CPU %ld): missing %ld ticks!"
-			" cycles %lX prev/now/next %lX/%lX/%lX  clock %lX\n",
-			cpuid, elapsed_cycles / cpt,
-			elapsed_cycles, prev_tick, now, next_tick, cpt);
-	}
-
-	/* FIXME: Can we improve the precision? Not with PAGE0. */
-	usec = (elapsed_cycles * 10000) / PAGE0->mem_10msec;
-	return usec;
-#else
-	return 0;
-#endif
-}
+/* clock source code */
 
-void
-do_gettimeofday (struct timeval *tv)
+static cycle_t read_cr16(void)
 {
-	unsigned long flags, seq, usec, sec;
-
-	/* Hold xtime_lock and adjust timeval.  */
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = gettimeoffset();
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	/* Move adjusted usec's into sec's.  */
-	while (usec >= USEC_PER_SEC) {
-		usec -= USEC_PER_SEC;
-		++sec;
-	}
-
-	/* Return adjusted result.  */
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
+	return get_cycles();
 }
 
-EXPORT_SYMBOL(do_gettimeofday);
+static struct clocksource clocksource_cr16 = {
+	.name			= "cr16",
+	.rating			= 300,
+	.read			= read_cr16,
+	.mask			= CLOCKSOURCE_MASK(BITS_PER_LONG),
+	.mult			= 0, /* to be set */
+	.shift			= 22,
+	.flags			= CLOCK_SOURCE_IS_CONTINUOUS,
+};
 
-int
-do_settimeofday (struct timespec *tv)
+#ifdef CONFIG_SMP
+int update_cr16_clocksource(void)
 {
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	{
-		/*
-		 * This is revolting. We need to set "xtime"
-		 * correctly. However, the value in this location is
-		 * the value at the most recent update of wall time.
-		 * Discover what correction gettimeofday would have
-		 * done, and then undo it!
-		 */
-		nsec -= gettimeoffset() * 1000;
+	int change = 0;
 
-		wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-		wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-		set_normalized_timespec(&xtime, sec, nsec);
-		set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-		ntp_clear();
+	/* since the cr16 cycle counters are not syncronized across CPUs,
+	   we'll check if we should switch to a safe clocksource: */
+	if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) {
+		clocksource_change_rating(&clocksource_cr16, 0);
+		change = 1;
 	}
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
+
+	return change;
 }
-EXPORT_SYMBOL(do_settimeofday);
+#else
+int update_cr16_clocksource(void)
+{
+	return 0; /* no change */
+}
+#endif /*CONFIG_SMP*/
 
 void __init start_cpu_itimer(void)
 {
@@ -301,11 +220,18 @@ void __init start_cpu_itimer(void)
 void __init time_init(void)
 {
 	static struct pdc_tod tod_data;
+	unsigned long current_cr16_khz;
 
 	clocktick = (100 * PAGE0->mem_10msec) / HZ;
 
 	start_cpu_itimer();	/* get CPU 0 started */
 
+	/* register at clocksource framework */
+	current_cr16_khz = PAGE0->mem_10msec/10;  /* kHz */
+	clocksource_cr16.mult = clocksource_khz2mult(current_cr16_khz,
+						clocksource_cr16.shift);
+	clocksource_register(&clocksource_cr16);
+
 	if (pdc_tod_read(&tod_data) == 0) {
 		unsigned long flags;
 
diff --git a/arch/parisc/kernel/topology.c b/arch/parisc/kernel/topology.c
index 068b20d822e7..d71cb018a21e 100644
--- a/arch/parisc/kernel/topology.c
+++ b/arch/parisc/kernel/topology.c
@@ -1,5 +1,5 @@
 /*
- * arch/parisc/kernel/topology.c - Populate driverfs with topology information
+ * arch/parisc/kernel/topology.c - Populate sysfs with topology information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 65cd6ca32fed..55bc1471967d 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/console.h>
 #include <linux/kallsyms.h>
+#include <linux/bug.h>
 
 #include <asm/assembly.h>
 #include <asm/system.h>
@@ -39,6 +40,8 @@
 #include <asm/pdc.h>
 #include <asm/pdc_chassis.h>
 #include <asm/unwind.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 
 #include "../math-emu/math-emu.h"	/* for handle_fpe() */
 
@@ -49,7 +52,7 @@
 DEFINE_SPINLOCK(pa_dbit_lock);
 #endif
 
-int printbinary(char *buf, unsigned long x, int nbits)
+static int printbinary(char *buf, unsigned long x, int nbits)
 {
 	unsigned long mask = 1UL << (nbits - 1);
 	while (mask != 0) {
@@ -61,7 +64,7 @@ int printbinary(char *buf, unsigned long x, int nbits)
 	return nbits;
 }
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define RFMT "%016lx"
 #else
 #define RFMT "%08lx"
@@ -160,13 +163,13 @@ static void do_show_stack(struct unwind_frame_info *info)
 {
 	int i = 1;
 
-	printk("Backtrace:\n");
+	printk(KERN_CRIT "Backtrace:\n");
 	while (i <= 16) {
 		if (unwind_once(info) < 0 || info->ip == 0)
 			break;
 
 		if (__kernel_text_address(info->ip)) {
-			printk(" [<" RFMT ">] ", info->ip);
+			printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
 #ifdef CONFIG_KALLSYMS
 			print_symbol("%s\n", info->ip);
 #else
@@ -185,18 +188,19 @@ void show_stack(struct task_struct *task, unsigned long *s)
 
 	if (!task) {
 		unsigned long sp;
-		struct pt_regs *r;
 
 HERE:
 		asm volatile ("copy %%r30, %0" : "=r"(sp));
-		r = kzalloc(sizeof(struct pt_regs), GFP_KERNEL);
-		if (!r)
-			return;
-		r->iaoq[0] = (unsigned long)&&HERE;
-		r->gr[2] = (unsigned long)__builtin_return_address(0);
-		r->gr[30] = sp;
-		unwind_frame_init(&info, current, r);
-		kfree(r);
+		{
+			struct pt_regs r;
+
+			memset(&r, 0, sizeof(struct pt_regs));
+			r.iaoq[0] = (unsigned long)&&HERE;
+			r.gr[2] = (unsigned long)__builtin_return_address(0);
+			r.gr[30] = sp;
+
+			unwind_frame_init(&info, current, &r);
+		}
 	} else {
 		unwind_frame_init_from_blocked_task(&info, task);
 	}
@@ -204,6 +208,11 @@ HERE:
 	do_show_stack(&info);
 }
 
+int is_valid_bugaddr(unsigned long iaoq)
+{
+	return 1;
+}
+
 void die_if_kernel(char *str, struct pt_regs *regs, long err)
 {
 	if (user_mode(regs)) {
@@ -222,15 +231,15 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	oops_in_progress = 1;
 
 	/* Amuse the user in a SPARC fashion */
-	printk(
-"      _______________________________ \n"
-"     < Your System ate a SPARC! Gah! >\n"
-"      ------------------------------- \n"
-"             \\   ^__^\n"
-"              \\  (xx)\\_______\n"
-"                 (__)\\       )\\/\\\n"
-"                  U  ||----w |\n"
-"                     ||     ||\n");
+	if (err) printk(
+KERN_CRIT "      _______________________________ \n"
+KERN_CRIT "     < Your System ate a SPARC! Gah! >\n"
+KERN_CRIT "      ------------------------------- \n"
+KERN_CRIT "             \\   ^__^\n"
+KERN_CRIT "              \\  (xx)\\_______\n"
+KERN_CRIT "                 (__)\\       )\\/\\\n"
+KERN_CRIT "                  U  ||----w |\n"
+KERN_CRIT "                     ||     ||\n");
 	
 	/* unlock the pdc lock if necessary */
 	pdc_emergency_unlock();
@@ -242,9 +251,20 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	if (!console_drivers)
 		pdc_console_restart();
 	
-	printk(KERN_CRIT "%s (pid %d): %s (code %ld)\n",
-		current->comm, current->pid, str, err);
+	if (err)
+		printk(KERN_CRIT "%s (pid %d): %s (code %ld)\n",
+			current->comm, current->pid, str, err);
+
+	/* Wot's wrong wif bein' racy? */
+	if (current->thread.flags & PARISC_KERNEL_DEATH) {
+		printk(KERN_CRIT "%s() recursion detected.\n", __FUNCTION__);
+		local_irq_enable();
+		while (1);
+	}
+	current->thread.flags |= PARISC_KERNEL_DEATH;
+
 	show_regs(regs);
+	dump_stack();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -255,14 +275,6 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 		panic("Fatal exception");
 	}
 
-	/* Wot's wrong wif bein' racy? */
-	if (current->thread.flags & PARISC_KERNEL_DEATH) {
-		printk(KERN_CRIT "%s() recursion detected.\n", __FUNCTION__);
-		local_irq_enable();
-		while (1);
-	}
-
-	current->thread.flags |= PARISC_KERNEL_DEATH;
 	do_exit(SIGSEGV);
 }
 
@@ -273,61 +285,45 @@ int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs)
 
 /* gdb uses break 4,8 */
 #define GDB_BREAK_INSN 0x10004
-void handle_gdb_break(struct pt_regs *regs, int wot)
+static void handle_gdb_break(struct pt_regs *regs, int wot)
 {
 	struct siginfo si;
 
-	si.si_code = wot;
-	si.si_addr = (void __user *) (regs->iaoq[0] & ~3);
 	si.si_signo = SIGTRAP;
 	si.si_errno = 0;
+	si.si_code = wot;
+	si.si_addr = (void __user *) (regs->iaoq[0] & ~3);
 	force_sig_info(SIGTRAP, &si, current);
 }
 
-void handle_break(unsigned iir, struct pt_regs *regs)
+static void handle_break(struct pt_regs *regs)
 {
-	struct siginfo si;
-
-	switch(iir) {
-	case 0x00:
-#ifdef PRINT_USER_FAULTS
-		printk(KERN_DEBUG "break 0,0: pid=%d command='%s'\n",
-		       current->pid, current->comm);
-#endif
-		die_if_kernel("Breakpoint", regs, 0);
-#ifdef PRINT_USER_FAULTS
-		show_regs(regs);
-#endif
-		si.si_code = TRAP_BRKPT;
-		si.si_addr = (void __user *) (regs->iaoq[0] & ~3);
-		si.si_signo = SIGTRAP;
-		force_sig_info(SIGTRAP, &si, current);
-		break;
-
-	case GDB_BREAK_INSN:
-		die_if_kernel("Breakpoint", regs, 0);
-		handle_gdb_break(regs, TRAP_BRKPT);
-		break;
+	unsigned iir = regs->iir;
+
+	if (unlikely(iir == PARISC_BUG_BREAK_INSN && !user_mode(regs))) {
+		/* check if a BUG() or WARN() trapped here.  */
+		enum bug_trap_type tt;
+		tt = report_bug(regs->iaoq[0] & ~3);
+		if (tt == BUG_TRAP_TYPE_WARN) {
+			regs->iaoq[0] += 4;
+			regs->iaoq[1] += 4;
+			return; /* return to next instruction when WARN_ON().  */
+		}
+		die_if_kernel("Unknown kernel breakpoint", regs,
+			(tt == BUG_TRAP_TYPE_NONE) ? 9 : 0);
+	}
 
-	default:
 #ifdef PRINT_USER_FAULTS
-		printk(KERN_DEBUG "break %#08x: pid=%d command='%s'\n",
-		       iir, current->pid, current->comm);
+	if (unlikely(iir != GDB_BREAK_INSN)) {
+		printk(KERN_DEBUG "break %d,%d: pid=%d command='%s'\n",
+			iir & 31, (iir>>13) & ((1<<13)-1),
+			current->pid, current->comm);
 		show_regs(regs);
-#endif
-		si.si_signo = SIGTRAP;
-		si.si_code = TRAP_BRKPT;
-		si.si_addr = (void __user *) (regs->iaoq[0] & ~3);
-		force_sig_info(SIGTRAP, &si, current);
-		return;
 	}
-}
-
+#endif
 
-int handle_toc(void)
-{
-	printk(KERN_CRIT "TOC call.\n");
-	return 0;
+	/* send standard GDB signal */
+	handle_gdb_break(regs, TRAP_BRKPT);
 }
 
 static void default_trap(int code, struct pt_regs *regs)
@@ -336,7 +332,7 @@ static void default_trap(int code, struct pt_regs *regs)
 	show_regs(regs);
 }
 
-void (*cpu_lpmc) (int code, struct pt_regs *regs) = default_trap;
+void (*cpu_lpmc) (int code, struct pt_regs *regs) __read_mostly = default_trap;
 
 
 void transfer_pim_to_trap_frame(struct pt_regs *regs)
@@ -554,7 +550,8 @@ void handle_interruption(int code, struct pt_regs *regs)
 		/* Low-priority machine check */
 		pdc_chassis_send_status(PDC_CHASSIS_DIRECT_LPMC);
 		
-		flush_all_caches();
+		flush_cache_all();
+		flush_tlb_all();
 		cpu_lpmc(5, regs);
 		return;
 
@@ -572,7 +569,7 @@ void handle_interruption(int code, struct pt_regs *regs)
 
 	case  9:
 		/* Break instruction trap */
-		handle_break(regs->iir,regs);
+		handle_break(regs);
 		return;
 	
 	case 10:
@@ -840,7 +837,7 @@ int __init check_ivt(void *iva)
 	return 0;
 }
 	
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 extern const void fault_vector_11;
 #endif
 extern const void fault_vector_20;
@@ -852,7 +849,7 @@ void __init trap_init(void)
 	if (boot_cpu_data.cpu_type >= pcxu)
 		iva = (void *) &fault_vector_20;
 	else
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 		panic("Can't boot 64-bit OS on PA1.1 processor!");
 #else
 		iva = (void *) &fault_vector_11;
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index bd2230d6a2a6..347bb922e6d0 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -20,8 +20,11 @@
  *
  */
 
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
 #include <asm/uaccess.h>
 
 /* #define DEBUG_UNALIGNED 1 */
@@ -32,7 +35,7 @@
 #define DPRINTF(fmt, args...)
 #endif
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define RFMT "%016lx"
 #else
 #define RFMT "%08lx"
@@ -147,15 +150,8 @@ static int emulate_ldh(struct pt_regs *regs, int toreg)
 "4:	ldi	-2, %1\n"
 	FIXUP_BRANCH(3b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,4b\n"
-"	.dword  2b,4b\n"
-#else
-"	.word	1b,4b\n"
-"	.word	2b,4b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b, 4b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b, 4b)
 	: "=r" (val), "=r" (ret)
 	: "0" (val), "r" (saddr), "r" (regs->isr)
 	: "r20", FIXUP_BRANCH_CLOBBER );
@@ -192,15 +188,8 @@ static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
 "4:	ldi	-2, %1\n"
 	FIXUP_BRANCH(3b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,4b\n"
-"	.dword  2b,4b\n"
-#else
-"	.word	1b,4b\n"
-"	.word	2b,4b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b, 4b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b, 4b)
 	: "=r" (val), "=r" (ret)
 	: "0" (val), "r" (saddr), "r" (regs->isr)
 	: "r19", "r20", FIXUP_BRANCH_CLOBBER );
@@ -224,7 +213,7 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 		regs->isr, regs->ior, toreg);
 #ifdef CONFIG_PA20
 
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	if (!flop)
 		return -1;
 #endif
@@ -243,15 +232,8 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "4:	ldi	-2, %1\n"
 	FIXUP_BRANCH(3b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,4b\n"
-"	.dword  2b,4b\n"
-#else
-"	.word	1b,4b\n"
-"	.word	2b,4b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b,4b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,4b)
 	: "=r" (val), "=r" (ret)
 	: "0" (val), "r" (saddr), "r" (regs->isr)
 	: "r19", "r20", FIXUP_BRANCH_CLOBBER );
@@ -275,17 +257,9 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "5:	ldi	-2, %2\n"
 	FIXUP_BRANCH(4b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,5b\n"
-"	.dword  2b,5b\n"
-"	.dword	3b,5b\n"
-#else
-"	.word	1b,5b\n"
-"	.word	2b,5b\n"
-"	.word	3b,5b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b,5b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,5b)
+	ASM_EXCEPTIONTABLE_ENTRY(3b,5b)
 	: "=r" (valh), "=r" (vall), "=r" (ret)
 	: "0" (valh), "1" (vall), "r" (saddr), "r" (regs->isr)
 	: "r19", "r20", FIXUP_BRANCH_CLOBBER );
@@ -325,15 +299,8 @@ static int emulate_sth(struct pt_regs *regs, int frreg)
 "4:	ldi	-2, %0\n"
 	FIXUP_BRANCH(3b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,4b\n"
-"	.dword  2b,4b\n"
-#else
-"	.word	1b,4b\n"
-"	.word	2b,4b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b,4b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,4b)
 	: "=r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", FIXUP_BRANCH_CLOBBER );
@@ -379,15 +346,8 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
 "4:	ldi	-2, %0\n"
 	FIXUP_BRANCH(3b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,4b\n"
-"	.dword  2b,4b\n"
-#else
-"	.word	1b,4b\n"
-"	.word	2b,4b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b,4b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,4b)
 	: "=r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
@@ -410,7 +370,7 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 		val,  regs->isr, regs->ior);
 
 #ifdef CONFIG_PA20
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
 	if (!flop)
 		return -1;
 #endif
@@ -436,19 +396,10 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "6:	ldi	-2, %0\n"
 	FIXUP_BRANCH(5b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,6b\n"
-"	.dword  2b,6b\n"
-"	.dword	3b,6b\n"
-"	.dword  4b,6b\n"
-#else
-"	.word	1b,6b\n"
-"	.word	2b,6b\n"
-"	.word	3b,6b\n"
-"	.word	4b,6b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b,6b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,6b)
+	ASM_EXCEPTIONTABLE_ENTRY(3b,6b)
+	ASM_EXCEPTIONTABLE_ENTRY(4b,6b)
 	: "=r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
@@ -479,21 +430,11 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "7:	ldi	-2, %0\n"
 	FIXUP_BRANCH(6b)
 "	.previous\n"
-"	.section __ex_table,\"aw\"\n"
-#ifdef __LP64__
-"	.dword	1b,7b\n"
-"	.dword  2b,7b\n"
-"	.dword	3b,7b\n"
-"	.dword  4b,7b\n"
-"	.dword  5b,7b\n"
-#else
-"	.word	1b,7b\n"
-"	.word	2b,7b\n"
-"	.word	3b,7b\n"
-"	.word	4b,7b\n"
-"	.word  	5b,7b\n"
-#endif
-"	.previous\n"
+	ASM_EXCEPTIONTABLE_ENTRY(1b,7b)
+	ASM_EXCEPTIONTABLE_ENTRY(2b,7b)
+	ASM_EXCEPTIONTABLE_ENTRY(3b,7b)
+	ASM_EXCEPTIONTABLE_ENTRY(4b,7b)
+	ASM_EXCEPTIONTABLE_ENTRY(5b,7b)
 	: "=r" (ret)
 	: "r" (valh), "r" (vall), "r" (regs->ior), "r" (regs->isr)
 	: "r19", "r20", "r21", "r1", FIXUP_BRANCH_CLOBBER );
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index c10ab47d81fa..5f75b3e65986 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/kallsyms.h>
 
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 3b78c2794c36..2a8253358c6c 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -68,6 +68,8 @@ SECTIONS
 
   RODATA
 
+  BUG_TABLE
+
   /* writeable */
   . = ALIGN(ASM_PAGE_SIZE);	/* Make sure this is page aligned so
   				   that we can properly leave these
diff --git a/arch/parisc/lib/bitops.c b/arch/parisc/lib/bitops.c
index f352666b5b2f..e3eb739fab19 100644
--- a/arch/parisc/lib/bitops.c
+++ b/arch/parisc/lib/bitops.c
@@ -17,7 +17,7 @@ raw_spinlock_t __atomic_hash[ATOMIC_HASH_SIZE] __lock_aligned = {
 };
 #endif
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 unsigned long __xchg64(unsigned long x, unsigned long *ptr)
 {
 	unsigned long temp, flags;
@@ -56,7 +56,7 @@ unsigned long __xchg8(char x, char *ptr)
 }
 
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 unsigned long __cmpxchg_u64(volatile unsigned long *ptr, unsigned long old, unsigned long new)
 {
 	unsigned long flags;
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index ecce3d35401f..d172d4245cdc 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -22,6 +22,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/assembly.h>
 #include <asm/errno.h>
+#include <linux/linkage.h>
 
 #ifdef CONFIG_SMP
 	.macro  get_fault_ip t1 t2
@@ -30,7 +31,7 @@
 	/* t2 = smp_processor_id() */
 	mfctl 30,\t2
 	ldw TI_CPU(\t2),\t2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 	extrd,u \t2,63,32,\t2
 #endif
 	/* t2 = &__per_cpu_offset[smp_processor_id()]; */
@@ -58,33 +59,34 @@
 	.section .fixup, "ax"
 
 	/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-	.export fixup_get_user_skip_1
-fixup_get_user_skip_1:
+ENTRY(fixup_get_user_skip_1)
 	get_fault_ip %r1,%r8
 	ldo 4(%r1), %r1
 	ldi -EFAULT, %r8
 	bv %r0(%r1)
 	copy %r0, %r9
+ENDPROC(fixup_get_user_skip_1)
 
-	.export fixup_get_user_skip_2
-fixup_get_user_skip_2:
+ENTRY(fixup_get_user_skip_2)
 	get_fault_ip %r1,%r8
 	ldo 8(%r1), %r1
 	ldi -EFAULT, %r8
 	bv %r0(%r1)
 	copy %r0, %r9
+ENDPROC(fixup_get_user_skip_2)
 
 	/* put_user() fixups, store -EFAULT in r8 */
-	.export fixup_put_user_skip_1
-fixup_put_user_skip_1:
+ENTRY(fixup_put_user_skip_1)
 	get_fault_ip %r1,%r8
 	ldo 4(%r1), %r1
 	bv %r0(%r1)
 	ldi -EFAULT, %r8
+ENDPROC(fixup_put_user_skip_1)
 
-	.export fixup_put_user_skip_2
-fixup_put_user_skip_2:
+ENTRY(fixup_put_user_skip_2)
 	get_fault_ip %r1,%r8
 	ldo 8(%r1), %r1
 	bv %r0(%r1)
 	ldi -EFAULT, %r8
+ENDPROC(fixup_put_user_skip_2)
+
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index a0509855c9a7..1bd23ccec17b 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -37,6 +37,7 @@
 	
 #include <asm/assembly.h>
 #include <asm/errno.h>
+#include <linux/linkage.h>
 
 	/*
 	 * get_sr gets the appropriate space value into
@@ -67,8 +68,7 @@
 	 *         otherwise strlen (i.e. excludes zero byte)
 	 */
 
-	.export lstrncpy_from_user,code
-lstrncpy_from_user:
+ENTRY(lstrncpy_from_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -87,6 +87,7 @@ $lsfu_exit:
 	bv          %r0(%r2)
 	nop
 	.exit
+ENDPROC(lstrncpy_from_user)
 
 	.section .fixup,"ax"
 3:      fixup_branch $lsfu_exit
@@ -94,13 +95,8 @@ $lsfu_exit:
 	.previous
 
 	.section __ex_table,"aw"
-#ifdef __LP64__
-	.dword      1b,3b
-	.dword      2b,3b
-#else
-	.word       1b,3b
-	.word       2b,3b
-#endif
+	ASM_ULONG_INSN 1b,3b
+	ASM_ULONG_INSN 2b,3b
 	.previous
 
 	.procend
@@ -112,8 +108,7 @@ $lsfu_exit:
 	 * otherwise, returns number of bytes not transferred.
 	 */
 
-	.export lclear_user,code
-lclear_user:
+ENTRY(lclear_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -127,6 +122,7 @@ $lclu_done:
 	bv          %r0(%r2)
 	copy        %r25,%r28
 	.exit
+ENDPROC(lclear_user)
 
 	.section .fixup,"ax"
 2:      fixup_branch $lclu_done
@@ -134,11 +130,7 @@ $lclu_done:
 	.previous
 
 	.section __ex_table,"aw"
-#ifdef __LP64__
-	.dword      1b,2b
-#else
-	.word       1b,2b
-#endif
+	ASM_ULONG_INSN 1b,2b
 	.previous
 
 	.procend
@@ -151,8 +143,7 @@ $lclu_done:
 	 *         else strlen + 1 (i.e. includes zero byte).
 	 */
 
-	.export lstrnlen_user,code
-lstrnlen_user:
+ENTRY(lstrnlen_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -172,6 +163,7 @@ $lslen_done:
 $lslen_nzero:
 	b           $lslen_done
 	ldo         1(%r26),%r26 /* special case for N == 0 */
+ENDPROC(lstrnlen_user)
 
 	.section .fixup,"ax"
 3:      fixup_branch $lslen_done
@@ -179,13 +171,8 @@ $lslen_nzero:
 	.previous
 
 	.section __ex_table,"aw"
-#ifdef __LP64__
-	.dword      1b,3b
-	.dword      2b,3b
-#else
-	.word       1b,3b
-	.word       2b,3b
-#endif
+	ASM_ULONG_INSN 1b,3b
+	ASM_ULONG_INSN 2b,3b
 	.previous
 
 	.procend
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index 5575e41f9d60..2c43ebe99a9c 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -96,30 +96,18 @@ DECLARE_PER_CPU(struct exception_data, exception_data);
 #define DPRINTF(fmt, args...)
 #endif
 
-#ifndef __LP64__
-#define EXC_WORD ".word"
-#else
-#define EXC_WORD ".dword"
-#endif
-
 #define def_load_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e)	\
 	__asm__ __volatile__ (				\
-	"1:\t" #_insn ",ma " #_sz "(" _s ",%1), %0\n" 	\
-	"\t.section __ex_table,\"aw\"\n"		\
-	"\t" EXC_WORD "\t1b\n"				\
-	"\t" EXC_WORD "\t" #_e "\n"			\
-	"\t.previous\n"					\
+	"1:\t" #_insn ",ma " #_sz "(" _s ",%1), %0\n\t"	\
+	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
 	: _tt(_t), "+r"(_a)				\
 	: 						\
 	: "r8")
 
 #define def_store_ai_insn(_insn,_sz,_tt,_s,_a,_t,_e) 	\
 	__asm__ __volatile__ (				\
-	"1:\t" #_insn ",ma %1, " #_sz "(" _s ",%0)\n" 	\
-	"\t.section __ex_table,\"aw\"\n"		\
-	"\t" EXC_WORD "\t1b\n"				\
-	"\t" EXC_WORD "\t" #_e "\n"			\
-	"\t.previous\n"					\
+	"1:\t" #_insn ",ma %1, " #_sz "(" _s ",%0)\n\t"	\
+	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
 	: "+r"(_a) 					\
 	: _tt(_t)					\
 	: "r8")
@@ -133,22 +121,16 @@ DECLARE_PER_CPU(struct exception_data, exception_data);
 
 #define def_load_insn(_insn,_tt,_s,_o,_a,_t,_e) 	\
 	__asm__ __volatile__ (				\
-	"1:\t" #_insn " " #_o "(" _s ",%1), %0\n"	\
-	"\t.section __ex_table,\"aw\"\n"		\
-	"\t" EXC_WORD "\t1b\n"				\
-	"\t" EXC_WORD "\t" #_e "\n"			\
-	"\t.previous\n"					\
+	"1:\t" #_insn " " #_o "(" _s ",%1), %0\n\t"	\
+	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
 	: _tt(_t) 					\
 	: "r"(_a)					\
 	: "r8")
 
 #define def_store_insn(_insn,_tt,_s,_t,_o,_a,_e) 	\
 	__asm__ __volatile__ (				\
-	"1:\t" #_insn " %0, " #_o "(" _s ",%1)\n" 	\
-	"\t.section __ex_table,\"aw\"\n"		\
-	"\t" EXC_WORD "\t1b\n"				\
-	"\t" EXC_WORD "\t" #_e "\n"			\
-	"\t.previous\n"					\
+	"1:\t" #_insn " %0, " #_o "(" _s ",%1)\n\t" 	\
+	ASM_EXCEPTIONTABLE_ENTRY(1b,_e)			\
 	: 						\
 	: _tt(_t), "r"(_a)				\
 	: "r8")
@@ -167,8 +149,8 @@ extern inline void prefetch_dst(const void *addr)
 	__asm__("ldd 0(" d_space ",%0), %%r0" : : "r" (addr));
 }
 #else
-#define prefetch_src(addr)
-#define prefetch_dst(addr)
+#define prefetch_src(addr) do { } while(0)
+#define prefetch_dst(addr) do { } while(0)
 #endif
 
 /* Copy from a not-aligned src to an aligned dst, using shifts. Handles 4 words
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 641f9c920eee..f6f67554c623 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -24,10 +24,6 @@
 			 /*  dumped to the console via printk)          */
 
 
-/* Defines for parisc_acctyp()	*/
-#define READ		0
-#define WRITE		1
-
 /* Various important other fields */
 #define bit22set(x)		(x & 0x00000200)
 #define bits23_25set(x)		(x & 0x000001c0)
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 12117db0043b..75ea9f2a8a41 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -6,7 +6,7 @@
  *    changed by Philipp Rumpf
  *  Copyright 1999 Philipp Rumpf (prumpf@tux.org)
  *  Copyright 2004 Randolph Chung (tausq@debian.org)
- *  Copyright 2006 Helge Deller (deller@gmx.de)
+ *  Copyright 2006-2007 Helge Deller (deller@gmx.de)
  *
  */
 
@@ -24,6 +24,7 @@
 #include <linux/pagemap.h>	/* for release_pages and page_cache_release */
 
 #include <asm/pgalloc.h>
+#include <asm/pgtable.h>
 #include <asm/tlb.h>
 #include <asm/pdc_chassis.h>
 #include <asm/mmzone.h>
@@ -65,11 +66,11 @@ static struct resource sysram_resources[MAX_PHYSMEM_RANGES] __read_mostly;
 physmem_range_t pmem_ranges[MAX_PHYSMEM_RANGES] __read_mostly;
 int npmem_ranges __read_mostly;
 
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
 #define MAX_MEM         (~0UL)
-#else /* !__LP64__ */
+#else /* !CONFIG_64BIT */
 #define MAX_MEM         (3584U*1024U*1024U)
-#endif /* !__LP64__ */
+#endif /* !CONFIG_64BIT */
 
 static unsigned long mem_limit __read_mostly = MAX_MEM;
 
@@ -452,6 +453,8 @@ unsigned long pcxl_dma_start __read_mostly;
 
 void __init mem_init(void)
 {
+	int codesize, reservedpages, datasize, initsize;
+
 	high_memory = __va((max_pfn << PAGE_SHIFT));
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -466,7 +469,32 @@ void __init mem_init(void)
 	}
 #endif
 
-	printk(KERN_INFO "Memory: %luk available\n", num_physpages << (PAGE_SHIFT-10));
+	codesize = (unsigned long)_etext - (unsigned long)_text;
+	datasize = (unsigned long)_edata - (unsigned long)_etext;
+	initsize = (unsigned long)__init_end - (unsigned long)__init_begin;
+
+	reservedpages = 0;
+{
+	unsigned long pfn;
+#ifdef CONFIG_DISCONTIGMEM
+	int i;
+
+	for (i = 0; i < npmem_ranges; i++) {
+		for (pfn = node_start_pfn(i); pfn < node_end_pfn(i); pfn++) {
+			if (PageReserved(pfn_to_page(pfn)))
+				reservedpages++;
+		}
+	}
+#else /* !CONFIG_DISCONTIGMEM */
+	for (pfn = 0; pfn < max_pfn; pfn++) {
+		/*
+		 * Only count reserved RAM pages
+		 */
+		if (PageReserved(pfn_to_page(pfn)))
+			reservedpages++;
+	}
+#endif
+}
 
 #ifdef CONFIG_PA11
 	if (hppa_dma_ops == &pcxl_dma_ops) {
@@ -480,6 +508,38 @@ void __init mem_init(void)
 	vmalloc_start = SET_MAP_OFFSET(MAP_START);
 #endif
 
+	printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
+		(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+		num_physpages << (PAGE_SHIFT-10),
+		codesize >> 10,
+		reservedpages << (PAGE_SHIFT-10),
+		datasize >> 10,
+		initsize >> 10
+	);
+
+#ifdef CONFIG_DEBUG_KERNEL /* double-sanity-check paranoia */
+	printk("virtual kernel memory layout:\n"
+	       "    vmalloc : 0x%p - 0x%p   (%4ld MB)\n"
+	       "    memory  : 0x%p - 0x%p   (%4ld MB)\n"
+	       "      .init : 0x%p - 0x%p   (%4ld kB)\n"
+	       "      .data : 0x%p - 0x%p   (%4ld kB)\n"
+	       "      .text : 0x%p - 0x%p   (%4ld kB)\n",
+
+	       (void*)VMALLOC_START, (void*)VMALLOC_END,
+	       (VMALLOC_END - VMALLOC_START) >> 20,
+
+	       __va(0), high_memory,
+	       ((unsigned long)high_memory - (unsigned long)__va(0)) >> 20,
+
+	       __init_begin, __init_end,
+	       ((unsigned long)__init_end - (unsigned long)__init_begin) >> 10,
+
+	       _etext, _edata,
+	       ((unsigned long)_edata - (unsigned long)_etext) >> 10,
+
+	       _text, _etext,
+	       ((unsigned long)_etext - (unsigned long)_text) >> 10);
+#endif
 }
 
 unsigned long *empty_zero_page __read_mostly;
@@ -547,7 +607,7 @@ void show_mem(void)
 
 				printk("Zone list for zone %d on node %d: ", j, i);
 				for (k = 0; zl->zones[k] != NULL; k++) 
-					printk("[%d/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
+					printk("[%ld/%s] ", zone_to_nid(zl->zones[k]), zl->zones[k]->name);
 				printk("\n");
 			}
 		}
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index 44b42c7f639d..92d496ad07c9 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -26,7 +26,7 @@
  */
 void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
 {
-	void *addr;
+	void __iomem *addr;
 	struct vm_struct *area;
 	unsigned long offset, last_addr;
 	pgprot_t pgprot;
@@ -80,14 +80,14 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 	if (!area)
 		return NULL;
 
-	addr = area->addr;
+	addr = (void __iomem *) area->addr;
 	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
 			       phys_addr, pgprot)) {
 		vfree(addr);
 		return NULL;
 	}
 
-	return (void __iomem *) (offset + (char *)addr);
+	return (void __iomem *) (offset + (char __iomem *)addr);
 }
 EXPORT_SYMBOL(__ioremap);
 
diff --git a/arch/parisc/mm/kmap.c b/arch/parisc/mm/kmap.c
deleted file mode 100644
index 1b1acd5e2f6e..000000000000
--- a/arch/parisc/mm/kmap.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* 
- *    kmap/page table map and unmap support routines
- *
- *    Copyright 1999,2000 Hewlett-Packard Company
- *    Copyright 2000 John Marvin <jsm at hp.com>
- *    Copyright 2000 Grant Grundler <grundler at parisc-linux.org>
- *    Copyright 2000 Philipp Rumpf <prumpf@tux.org>
- *
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/*
-** Stolen mostly from arch/parisc/kernel/pci-dma.c
-*/
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
-
-#include <asm/io.h>
-#include <asm/page.h>		/* get_order */
-
-#undef flush_cache_all
-#define flush_cache_all flush_all_caches
-
-typedef void (*pte_iterator_t) (pte_t * pte, unsigned long arg);
-
-#if 0
-/* XXX This routine could be used with iterate_page() to replace
- * unmap_uncached_page() and save a little code space but I didn't
- * do that since I'm not certain whether this is the right path. -PB
- */
-static void unmap_cached_pte(pte_t * pte, unsigned long addr, unsigned long arg)
-{
-	pte_t page = *pte;
-	pte_clear(&init_mm, addr, pte);
-	if (!pte_none(page)) {
-		if (pte_present(page)) {
-			unsigned long map_nr = pte_pagenr(page);
-			if (map_nr < max_mapnr)
-				__free_page(mem_map + map_nr);
-		} else {
-			printk(KERN_CRIT
-			       "Whee.. Swapped out page in kernel page table\n");
-		}
-	}
-}
-#endif
-
-/* These two routines should probably check a few things... */
-static void set_uncached(pte_t * pte, unsigned long arg)
-{
-	pte_val(*pte) |= _PAGE_NO_CACHE;
-}
-
-static void set_cached(pte_t * pte, unsigned long arg)
-{
-	pte_val(*pte) &= ~_PAGE_NO_CACHE;
-}
-
-static inline void iterate_pte(pmd_t * pmd, unsigned long address,
-			       unsigned long size, pte_iterator_t op,
-			       unsigned long arg)
-{
-	pte_t *pte;
-	unsigned long end;
-
-	if (pmd_none(*pmd))
-		return;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
-		return;
-	}
-	pte = pte_offset(pmd, address);
-	address &= ~PMD_MASK;
-	end = address + size;
-	if (end > PMD_SIZE)
-		end = PMD_SIZE;
-	do {
-		op(pte, arg);
-		address += PAGE_SIZE;
-		pte++;
-	} while (address < end);
-}
-
-static inline void iterate_pmd(pgd_t * dir, unsigned long address,
-			       unsigned long size, pte_iterator_t op,
-			       unsigned long arg)
-{
-	pmd_t *pmd;
-	unsigned long end;
-
-	if (pgd_none(*dir))
-		return;
-	if (pgd_bad(*dir)) {
-		pgd_ERROR(*dir);
-		pgd_clear(dir);
-		return;
-	}
-	pmd = pmd_offset(dir, address);
-	address &= ~PGDIR_MASK;
-	end = address + size;
-	if (end > PGDIR_SIZE)
-		end = PGDIR_SIZE;
-	do {
-		iterate_pte(pmd, address, end - address, op, arg);
-		address = (address + PMD_SIZE) & PMD_MASK;
-		pmd++;
-	} while (address < end);
-}
-
-static void iterate_pages(unsigned long address, unsigned long size,
-			  pte_iterator_t op, unsigned long arg)
-{
-	pgd_t *dir;
-	unsigned long end = address + size;
-
-	dir = pgd_offset_k(address);
-	flush_cache_all();
-	do {
-		iterate_pmd(dir, address, end - address, op, arg);
-		address = (address + PGDIR_SIZE) & PGDIR_MASK;
-		dir++;
-	} while (address && (address < end));
-	flush_tlb_all();
-}
-
-void
-kernel_set_cachemode(unsigned long vaddr, unsigned long size, int what)
-{
-	switch (what) {
-	case IOMAP_FULL_CACHING:
-		iterate_pages(vaddr, size, set_cached, 0);
-		flush_tlb_range(NULL, vaddr, size);
-		break;
-	case IOMAP_NOCACHE_SER:
-		iterate_pages(vaddr, size, set_uncached, 0);
-		flush_tlb_range(NULL, vaddr, size);
-		break;
-	default:
-		printk(KERN_CRIT
-		       "kernel_set_cachemode mode %d not understood\n",
-		       what);
-		break;
-	}
-}
diff --git a/arch/parisc/oprofile/init.c b/arch/parisc/oprofile/init.c
index a5b898c4d0b0..113f5139f551 100644
--- a/arch/parisc/oprofile/init.c
+++ b/arch/parisc/oprofile/init.c
@@ -18,6 +18,6 @@ int __init oprofile_arch_init(struct oprofile_operations * ops)
 }
 
 
-void oprofile_arch_exit()
+void oprofile_arch_exit(void)
 {
 }
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 340d9beab6d1..a54a9a2e36f3 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -11,6 +11,11 @@ config PPC64
 	  This option selects whether a 32-bit or a 64-bit kernel
 	  will be built.
 
+config PPC_PM_NEEDS_RTC_LIB
+	bool
+	select RTC_LIB
+	default y if PM
+
 config PPC32
 	bool
 	default y if !PPC64
@@ -89,7 +94,7 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER
 
 config ARCH_MAY_HAVE_PC_FDC
 	bool
-	default y
+	default !PPC_PSERIES || PCI
 
 config PPC_OF
 	def_bool y
@@ -157,17 +162,20 @@ config PPC_83xx
 	select FSL_SOC
 	select 83xx
 	select PPC_FPU
+	select WANT_DEVICE_TREE
 
 config PPC_85xx
 	bool "Freescale 85xx"
 	select E500
 	select FSL_SOC
 	select 85xx
+	select WANT_DEVICE_TREE
 
 config PPC_86xx
 	bool "Freescale 86xx"
 	select 6xx
 	select FSL_SOC
+	select FSL_PCIE
 	select PPC_FPU
 	select ALTIVEC
 	help
@@ -186,7 +194,6 @@ config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 
-
 config E200
 	bool "Freescale e200"
 
@@ -367,385 +374,7 @@ endmenu
 
 source "init/Kconfig"
 
-menu "Platform support"
-	depends on PPC64 || CLASSIC32
-
-choice
-	prompt "Machine type"
-	default PPC_MULTIPLATFORM
-
-config PPC_MULTIPLATFORM
-	bool "Generic desktop/server/laptop"
-	help
-	  Select this option if configuring for an IBM pSeries or
-	  RS/6000 machine, an Apple machine, or a PReP, CHRP,
-	  Maple or Cell-based machine.
-
-config EMBEDDED6xx
-	bool "Embedded 6xx/7xx/7xxx-based board"
-	depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
-
-config APUS
-	bool "Amiga-APUS"
-	depends on PPC32 && BROKEN
-	help
-	  Select APUS if configuring for a PowerUP Amiga.
-	  More information is available at:
-	  <http://linux-apus.sourceforge.net/>.
-endchoice
-
-config QUICC_ENGINE
-	bool
-	depends on PPC_MPC836x || PPC_MPC832x
-	default y
-	help
-	  The QUICC Engine (QE) is a new generation of communications
-	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
-	  Selecting this option means that you wish to build a kernel
-	  for a machine with a QE coprocessor.
-
-config PPC_PSERIES
-	depends on PPC_MULTIPLATFORM && PPC64
-	bool "IBM pSeries & new (POWER5-based) iSeries"
-	select MPIC
-	select PPC_I8259
-	select PPC_RTAS
-	select RTAS_ERROR_LOGGING
-	select PPC_UDBG_16550
-	select PPC_NATIVE
-	default y
-
-config PPC_ISERIES
-	bool "IBM Legacy iSeries"
-	depends on PPC_MULTIPLATFORM && PPC64
-	select PPC_INDIRECT_IO
-
-config PPC_CHRP
-	bool "Common Hardware Reference Platform (CHRP) based machines"
-	depends on PPC_MULTIPLATFORM && PPC32
-	select MPIC
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	select PPC_RTAS
-	select PPC_MPC106
-	select PPC_UDBG_16550
-	select PPC_NATIVE
-	default y
-
-config PPC_MPC52xx
-	bool
-	default n
-
-config PPC_MPC5200
-	bool
-	select PPC_MPC52xx
-	default n
-
-config PPC_MPC5200_BUGFIX
-	bool "MPC5200 (L25R) bugfix support"
-	depends on PPC_MPC5200
-	default n
-	help
-	  Enable workarounds for original MPC5200 errata.  This is not required
-	  for MPC5200B based boards.
-
-	  It is safe to say 'Y' here
-
-config PPC_EFIKA
-	bool "bPlan Efika 5k2. MPC5200B based computer"
-	depends on PPC_MULTIPLATFORM && PPC32
-	select PPC_RTAS
-	select RTAS_PROC
-	select PPC_MPC52xx
-	select PPC_NATIVE
-	default n
-
-config PPC_LITE5200
-	bool "Freescale Lite5200 Eval Board"
-	depends on PPC_MULTIPLATFORM && PPC32
-	select PPC_MPC5200
-	default n
-
-config PPC_PMAC
-	bool "Apple PowerMac based machines"
-	depends on PPC_MULTIPLATFORM
-	select MPIC
-	select PPC_INDIRECT_PCI if PPC32
-	select PPC_MPC106 if PPC32
-	select PPC_NATIVE
-	default y
-
-config PPC_PMAC64
-	bool
-	depends on PPC_PMAC && POWER4
-	select MPIC
-	select U3_DART
-	select MPIC_BROKEN_U3
-	select GENERIC_TBSYNC
-	select PPC_970_NAP
-	default y
-
-config PPC_PREP
-	bool "PowerPC Reference Platform (PReP) based machines"
-	depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
-	select MPIC
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	select PPC_UDBG_16550
-	select PPC_NATIVE
-	default n
-
-config PPC_MAPLE
-	depends on PPC_MULTIPLATFORM && PPC64
-	bool "Maple 970FX Evaluation Board"
-	select MPIC
-	select U3_DART
-	select MPIC_BROKEN_U3
-	select GENERIC_TBSYNC
-	select PPC_UDBG_16550
-	select PPC_970_NAP
-	select PPC_NATIVE
-	select PPC_RTAS
-	select MMIO_NVRAM
-	select ATA_NONSTANDARD if ATA
-	default n
-	help
-          This option enables support for the Maple 970FX Evaluation Board.
-	  For more information, refer to <http://www.970eval.com>
-
-config PPC_PASEMI
-	depends on PPC_MULTIPLATFORM && PPC64
-	bool "PA Semi SoC-based platforms"
-	default n
-	select MPIC
-	select PPC_UDBG_16550
-	select GENERIC_TBSYNC
-	select PPC_NATIVE
-	help
-	  This option enables support for PA Semi's PWRficient line
-	  of SoC processors, including PA6T-1682M
-
-config PPC_CELL
-	bool
-	default n
-
-config PPC_CELL_NATIVE
-	bool
-	select PPC_CELL
-	select PPC_DCR_MMIO
-	select PPC_OF_PLATFORM_PCI
-	select PPC_INDIRECT_IO
-	select PPC_NATIVE
-	select MPIC
-	default n
-
-config PPC_IBM_CELL_BLADE
-	bool "IBM Cell Blade"
-	depends on PPC_MULTIPLATFORM && PPC64
-	select PPC_CELL_NATIVE
-	select PPC_RTAS
-	select MMIO_NVRAM
-	select PPC_UDBG_16550
-	select UDBG_RTAS_CONSOLE
-
-config PPC_PS3
-	bool "Sony PS3 (incomplete)"
-	depends on PPC_MULTIPLATFORM && PPC64
-	select PPC_CELL
-	select USB_ARCH_HAS_OHCI
-	select USB_OHCI_LITTLE_ENDIAN
-	select USB_OHCI_BIG_ENDIAN_MMIO
-	select USB_ARCH_HAS_EHCI
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  This option enables support for the Sony PS3 game console
-	  and other platforms using the PS3 hypervisor.
-	  Support for this platform is not yet complete, so
-	  enabling this will not result in a bootable kernel on a
-	  PS3 system.
-
-config PPC_CELLEB
-	bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
-	depends on PPC_MULTIPLATFORM && PPC64
-	select PPC_CELL
-	select PPC_OF_PLATFORM_PCI
-	select HAS_TXX9_SERIAL
-	select PPC_UDBG_BEAT
-	select USB_OHCI_BIG_ENDIAN_MMIO
-	select USB_EHCI_BIG_ENDIAN_MMIO
-
-config PPC_NATIVE
-	bool
-	depends on PPC_MULTIPLATFORM
-	help
-	  Support for running natively on the hardware, i.e. without
-	  a hypervisor. This option is not user-selectable but should
-	  be selected by all platforms that need it.
-
-config UDBG_RTAS_CONSOLE
-	bool "RTAS based debug console"
-	depends on PPC_RTAS
-	default n
-
-config PPC_UDBG_BEAT
-	bool "BEAT based debug console"
-	depends on PPC_CELLEB
-	default n
-
-config XICS
-	depends on PPC_PSERIES
-	bool
-	default y
-
-config U3_DART
-	bool 
-	depends on PPC_MULTIPLATFORM && PPC64
-	default n
-
-config PPC_RTAS
-	bool
-	default n
-
-config RTAS_ERROR_LOGGING
-	bool
-	depends on PPC_RTAS
-	default n
-
-config RTAS_PROC
-	bool "Proc interface to RTAS"
-	depends on PPC_RTAS
-	default y
-
-config RTAS_FLASH
-	tristate "Firmware flash interface"
-	depends on PPC64 && RTAS_PROC
-
-config MMIO_NVRAM
-	bool
-	default n
-
-config MPIC_BROKEN_U3
-	bool
-	depends on PPC_MAPLE
-	default y
-
-config IBMVIO
-	depends on PPC_PSERIES || PPC_ISERIES
-	bool
-	default y
-
-config IBMEBUS
-	depends on PPC_PSERIES
-	bool "Support for GX bus based adapters"
-	help
-	  Bus device driver for GX bus based adapters.
-
-config PPC_MPC106
-	bool
-	default n
-
-config PPC_970_NAP
-	bool
-	default n
-
-config PPC_INDIRECT_IO
-	bool
-	select GENERIC_IOMAP
-	default n
-
-config GENERIC_IOMAP
-	bool
-	default n
-
-source "drivers/cpufreq/Kconfig"
-
-config CPU_FREQ_PMAC
-	bool "Support for Apple PowerBooks"
-	depends on CPU_FREQ && ADB_PMU && PPC32
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple PowerBooks,
-	  this currently includes some models of iBook & Titanium
-	  PowerBook.
-
-config CPU_FREQ_PMAC64
-	bool "Support for some Apple G5s"
-	depends on CPU_FREQ && PPC64
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple iMac G5,
-	  and some of the more recent desktop G5 machines as well.
-
-config PPC601_SYNC_FIX
-	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && (PPC_PREP || PPC_PMAC)
-	help
-	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
-	  mean that extra synchronization instructions are required near
-	  certain instructions, typically those that make major changes to the
-	  CPU state.  These extra instructions reduce performance slightly.
-	  If you say N here, these extra instructions will not be included,
-	  resulting in a kernel which will run faster but may not run at all
-	  on some systems with the PPC601 chip.
-
-	  If in doubt, say Y here.
-
-config TAU
-	bool "On-chip CPU temperature sensor support"
-	depends on 6xx
-	help
-	  G3 and G4 processors have an on-chip temperature sensor called the
-	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-	  temperature within 2-4 degrees Celsius. This option shows the current
-	  on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in many cases, does not work at all, so don't assume the cpu
-	  temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
-	depends on TAU
-	---help---
-	  The TAU supports an interrupt driven mode which causes an interrupt
-	  whenever the temperature goes out of range. This is the fastest way
-	  to get notified the temp has exceeded a range. With this option off,
-	  a timer is used to re-check the temperature periodically.
-
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
-
-config TAU_AVERAGE
-	bool "Average high and low temp"
-	depends on TAU
-	---help---
-	  The TAU hardware can compare the temperature to an upper and lower
-	  bound.  The default behavior is to show both the upper and lower
-	  bound in /proc/cpuinfo. If the range is large, the temperature is
-	  either changing a lot, or the TAU hardware is broken (likely on some
-	  G4's). If the range is small (around 4 degrees), the temperature is
-	  relatively stable.  If you say Y here, a single temperature value,
-	  halfway between the upper and lower bounds, will be reported in
-	  /proc/cpuinfo.
-
-	  If in doubt, say N here.
-
-endmenu
-
-source arch/powerpc/platforms/embedded6xx/Kconfig
-source arch/powerpc/platforms/4xx/Kconfig
-source arch/powerpc/platforms/82xx/Kconfig
-source arch/powerpc/platforms/83xx/Kconfig
-source arch/powerpc/platforms/85xx/Kconfig
-source arch/powerpc/platforms/86xx/Kconfig
-source arch/powerpc/platforms/8xx/Kconfig
-source arch/powerpc/platforms/cell/Kconfig
-source arch/powerpc/platforms/ps3/Kconfig
-source arch/powerpc/platforms/pasemi/Kconfig
+source "arch/powerpc/platforms/Kconfig"
 
 menu "Kernel options"
 
@@ -828,15 +457,6 @@ config CRASH_DUMP
 
 	  Don't change this unless you know what you are doing.
 
-config EMBEDDEDBOOT
-	bool
-	depends on 8xx || 8260
-	default y
-
-config PC_KEYBOARD
-	bool "PC PS/2 style Keyboard"
-	depends on 4xx || CPM2
-
 config PPCBUG_NVRAM
 	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
 	default y if PPC_PREP
@@ -850,8 +470,6 @@ config IRQ_ALL_CPUS
 	  CPU.  Generally saying Y is safe, although some problems have been
 	  reported with SMP Power Macintoshes with this option enabled.
 
-source "arch/powerpc/platforms/pseries/Kconfig"
-
 config NUMA
 	bool "NUMA support"
 	depends on PPC64
@@ -901,10 +519,10 @@ config PPC_64K_PAGES
 	depends on PPC64
 	help
 	  This option changes the kernel logical page size to 64k. On machines
-          without processor support for 64k pages, the kernel will simulate
-          them by loading each individual 4k page on demand transparently,
-          while on hardware with such support, it will be used to map
-          normal application pages.
+	  without processor support for 64k pages, the kernel will simulate
+	  them by loading each individual 4k page on demand transparently,
+	  while on hardware with such support, it will be used to map
+	  normal application pages.
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -922,8 +540,6 @@ config PROC_DEVICETREE
 	  an image of the device tree that the kernel copies from Open
 	  Firmware or other boot firmware. If unsure, say Y here.
 
-source "arch/powerpc/platforms/prep/Kconfig"
-
 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"
 
@@ -958,6 +574,29 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config WANT_DEVICE_TREE
+	bool
+	default n
+
+config DEVICE_TREE
+	string "Static device tree source file"
+	depends on WANT_DEVICE_TREE
+	help
+	  This specifies the device tree source (.dts) file to be
+	  compiled and included when building the bootwrapper.  If a
+	  relative filename is given, then it will be relative to
+	  arch/powerpc/boot/dts.  If you are not using the bootwrapper,
+	  or do not need to build a dts into the bootwrapper, this
+	  field is ignored.
+
+	  For example, this is required when building a cuImage target
+	  for an older U-Boot, which cannot pass a device tree itself.
+	  Such a kernel will not work with a newer U-Boot that tries to
+	  pass a device tree (unless you tell it not to).  If your U-Boot
+	  does not mention a device tree in "help bootm", then use the
+	  cuImage target and specify a device tree here.  Otherwise, use
+	  the uImage target and leave this field blank.
+
 endmenu
 
 config ISA_DMA_API
@@ -986,24 +625,17 @@ config GENERIC_ISA_DMA
 	depends on PPC64 || POWER4 || 6xx && !CPM2
 	default y
 
-config MPIC
-	bool
-	default n
-
-config MPIC_WEIRD
-	bool
-	default n
-
-config PPC_I8259
-	bool
-	default n
-
 config PPC_INDIRECT_PCI
 	bool
 	depends on PCI
 	default y if 40x || 44x
 	default n
 
+config PPC_INDIRECT_PCI_BE
+	bool
+	depends PPC_INDIRECT_PCI
+	default n
+
 config EISA
 	bool
 
@@ -1013,13 +645,18 @@ config SBUS
 config FSL_SOC
 	bool
 
+config FSL_PCIE
+	bool
+	depends on PPC_86xx
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
 
 config PCI
 	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-		|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 || PPC_PS3
+		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
+		|| MPC7448HPC2 || PPC_PS3
 	default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
@@ -1219,12 +856,10 @@ source "fs/Kconfig"
 
 source "arch/powerpc/sysdev/qe_lib/Kconfig"
 
-source "arch/powerpc/platforms/iseries/Kconfig"
-
 source "lib/Kconfig"
 
 menu "Instrumentation Support"
-        depends on EXPERIMENTAL
+	depends on EXPERIMENTAL
 
 source "arch/powerpc/oprofile/Kconfig"
 
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index d39d13327e6d..86aa3745af7f 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -18,6 +18,15 @@ config DEBUG_STACK_USAGE
 
 	  This option will slow down process creation somewhat.
 
+config DEBUG_PAGEALLOC
+        bool "Debug page memory allocations"
+        depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND
+        help
+          Unmap pages from the kernel linear mapping after free_pages().
+          This results in a large slowdown, but helps to find certain types
+          of memory corruptions.
+
+
 config HCALL_STATS
 	bool "Hypervisor call instrumentation"
 	depends on PPC_PSERIES && DEBUG_FS
@@ -132,8 +141,7 @@ config BOOTX_TEXT
 
 config SERIAL_TEXT_DEBUG
 	bool "Support for early boot texts over serial port"
-	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
-		PPC_GEN550 || PPC_MPC52xx
+	depends on 4xx
 
 config PPC_EARLY_DEBUG
 	bool "Early debugging (dangerous)"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index a00fe7236555..794992025d8d 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -102,9 +102,9 @@ CFLAGS += $(call cc-option,-mno-altivec)
 # kernel considerably.
 CFLAGS += $(call cc-option,-funit-at-a-time)
 
-ifndef CONFIG_FSL_BOOKE
-CFLAGS		+= -mstring
-endif
+# Never use string load/store instructions as they are
+# often slow when they are implemented at all
+CFLAGS		+= -mno-string
 
 ifeq ($(CONFIG_6xx),y)
 CFLAGS		+= -mcpu=powerpc
@@ -148,7 +148,7 @@ all: $(KBUILD_IMAGE)
 
 CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
-BOOT_TARGETS = zImage zImage.initrd uImage
+BOOT_TARGETS = zImage zImage.initrd uImage cuImage
 
 PHONY += $(BOOT_TARGETS)
 
@@ -166,6 +166,9 @@ define archhelp
   @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
 endef
 
+install:
+	$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 0734b2fc1d95..eec7af7e5993 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -18,6 +18,9 @@ kernel-vmlinux.strip.c
 kernel-vmlinux.strip.gz
 mktree
 uImage
+cuImage
+cuImage.bin.gz
+cuImage.elf
 zImage
 zImage.chrp
 zImage.coff
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index dc779407de14..3716594ea33e 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,10 +40,11 @@ zliblinuxheader := zlib.h zconf.h zutil.h
 $(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
 		$(addprefix $(obj)/,$(zlibheader))
 
-src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
-		ns16550.c serial.c simple_alloc.c div64.S util.S $(zlib)
-src-plat := of.c
-src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
+src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
+		ns16550.c serial.c simple_alloc.c div64.S util.S \
+		gunzip_util.c elf_util.c $(zlib) devtree.c
+src-plat := of.c cuboot-83xx.c cuboot-85xx.c
+src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
 obj-boot := $(addsuffix .o, $(basename $(src-boot)))
@@ -75,7 +76,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S
 	@cp $< $@
 
 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
-		empty.c zImage zImage.coff.lds zImage.lds zImage.sandpoint
+		empty.c zImage.coff.lds zImage.lds
 
 quiet_cmd_bootcc = BOOTCC  $@
       cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
@@ -84,23 +85,25 @@ quiet_cmd_bootas = BOOTAS  $@
       cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
 
 quiet_cmd_bootar = BOOTAR  $@
-      cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@
+      cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
 
-$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c
+$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
 	$(call if_changed_dep,bootcc)
-$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S
+$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 	$(call if_changed_dep,bootas)
 
-$(obj)/wrapper.a: $(obj-wlib)
-	$(call cmd,bootar)
+$(obj)/wrapper.a: $(obj-wlib) FORCE
+	$(call if_changed,bootar)
 
 hostprogs-y	:= addnote addRamDisk hack-coff mktree
 
-extra-y		:= $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
+targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
+extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
 		   $(obj)/zImage.lds $(obj)/zImage.coff.lds
 
 wrapper		:=$(srctree)/$(src)/wrapper
-wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree)
+wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
+			$(wrapper) FORCE
 
 #############
 # Bits for building various flavours of zImage
@@ -113,50 +116,10 @@ CROSSWRAP := -C "$(CROSS_COMPILE)"
 endif
 endif
 
+# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
 quiet_cmd_wrap	= WRAP    $@
-      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux
-quiet_cmd_wrap_initrd = WRAP    $@
-      cmd_wrap_initrd =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
-				-i $(obj)/ramdisk.image.gz vmlinux
-
-$(obj)/zImage.chrp: vmlinux $(wrapperbits)
-	$(call cmd,wrap,chrp)
-
-$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits)
-	$(call cmd,wrap_initrd,chrp)
-
-$(obj)/zImage.pseries:	vmlinux $(wrapperbits)
-	$(call cmd,wrap,pseries)
-
-$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits)
-	$(call cmd,wrap_initrd,pseries)
-
-$(obj)/zImage.pmac: vmlinux $(wrapperbits)
-	$(call cmd,wrap,pmac)
-
-$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits)
-	$(call cmd,wrap_initrd,pmac)
-
-$(obj)/zImage.coff: vmlinux $(wrapperbits)
-	$(call cmd,wrap,pmaccoff)
-
-$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits)
-	$(call cmd,wrap_initrd,pmaccoff)
-
-$(obj)/zImage.miboot: vmlinux $(wrapperbits)
-	$(call cmd,wrap,miboot)
-
-$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
-	$(call cmd,wrap_initrd,miboot)
-
-$(obj)/zImage.ps3: vmlinux
-	$(STRIP) -s -R .comment $< -o $@
-
-$(obj)/zImage.initrd.ps3: vmlinux
-	@echo "  WARNING zImage.initrd.ps3 not supported (yet)"
-
-$(obj)/uImage: vmlinux $(wrapperbits)
-	$(call cmd,wrap,uboot)
+      cmd_wrap	=$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
+		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.pseries
@@ -166,7 +129,7 @@ image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
-image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
+image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage cuImage
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
@@ -174,16 +137,55 @@ ifeq ($(CONFIG_PPC32),y)
 image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
 endif
 
+initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y))
+initrd-y := $(filter-out $(image-y), $(initrd-y))
+targets	+= $(image-y) $(initrd-y)
+
+$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
+
+# Don't put the ramdisk on the pattern rule; when its missing make will try
+# the pattern rule with less dependencies that also matches (even with the
+# hard dependency listed).
+$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
+	$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
+
+$(obj)/zImage.%: vmlinux $(wrapperbits)
+	$(call if_changed,wrap,$*)
+
+$(obj)/zImage.ps3: vmlinux
+	$(STRIP) -s -R .comment $< -o $@
+
+$(obj)/zImage.initrd.ps3: vmlinux
+	@echo "  WARNING zImage.initrd.ps3 not supported (yet)"
+
+$(obj)/uImage: vmlinux $(wrapperbits)
+	$(call if_changed,wrap,uboot)
+
+cuboot-plat-$(CONFIG_83xx) += 83xx
+cuboot-plat-$(CONFIG_85xx) += 85xx
+cuboot-plat-y += unknown-platform
+
+dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\
+       ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE)
+
+$(obj)/cuImage: vmlinux $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$(word 1,$(cuboot-plat-y)),$(dts))
 
 $(obj)/zImage:		$(addprefix $(obj)/, $(image-y))
 	@rm -f $@; ln $< $@
 $(obj)/zImage.initrd:	$(addprefix $(obj)/, $(initrd-y))
 	@rm -f $@; ln $< $@
 
-install: $(CONFIGURE) $(image-y)
+install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 	sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
 
-clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz)
-clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz)
-clean-files += $(image-)
+# anything not in $(targets)
+clean-files += $(image-) $(initrd-) zImage zImage.initrd \
+               cuImage.elf cuImage.bin.gz
+
+# clean up files cached by wrapper
+clean-kernel := vmlinux.strip vmlinux.bin
+clean-kernel += $(addsuffix .gz,$(clean-kernel))
+# If not absolute clean-files are relative to $(obj).
+clean-files += $(addprefix $(objtree)/, $(clean-kernel))
diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S
index 70e65b13e033..5a4215c4b014 100644
--- a/arch/powerpc/boot/crt0.S
+++ b/arch/powerpc/boot/crt0.S
@@ -16,8 +16,11 @@
 _zimage_start_opd:
 	.long	_zimage_start, 0, 0, 0
 
+	.weak	_zimage_start
 	.globl	_zimage_start
 _zimage_start:
+	.globl	_zimage_start_lib
+_zimage_start_lib:
 	/* Work out the offset between the address we were linked at
 	   and the address where we're running. */
 	bl	1f
@@ -44,7 +47,7 @@ _zimage_start:
 	addi	r9,r9,4
 	bdnz	2b
 
-	/* Do a cache flush for our text, in case OF didn't */
+	/* Do a cache flush for our text, in case the loader didn't */
 3:	lis	r9,_start@ha
 	addi	r9,r9,_start@l
 	add	r9,r0,r9
@@ -59,6 +62,34 @@ _zimage_start:
 	sync
 	isync
 
-	mr	r6,r1
-	b	start
+	/* Clear the BSS */
+	lis	r9,__bss_start@ha
+	addi	r9,r9,__bss_start@l
+	add	r9,r0,r9
+	lis	r8,_end@ha
+	addi	r8,r8,_end@l
+	add	r8,r0,r8
+	li	r10,0
+5:	stw	r10,0(r9)
+	addi	r9,r9,4
+	cmplw	cr0,r9,r8
+	blt	5b
 
+	/* Possibly set up a custom stack */
+.weak	_platform_stack_top
+	lis	r8,_platform_stack_top@ha
+	addi	r8,r8,_platform_stack_top@l
+	cmpwi	r8,0
+	beq	6f
+	add	r8,r0,r8
+	lwz	r1,0(r8)
+	add	r1,r0,r1
+	li	r0,0
+	stwu	r0,-16(r1)	/* establish a stack frame */
+6:
+
+	/* Call platform_init() */
+	bl	platform_init
+
+	/* Call start */
+	b	start
diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c
new file mode 100644
index 000000000000..6cbc20afb4d8
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-83xx.c
@@ -0,0 +1,68 @@
+/*
+ * Old U-boot compatibility for 83xx
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+
+#define TARGET_83xx
+#include "ppcboot.h"
+
+static bd_t bd;
+extern char _end[];
+extern char _dtb_start[], _dtb_end[];
+
+static void platform_fixups(void)
+{
+	void *soc;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq);
+
+	/* Unfortunately, the specific model number is encoded in the
+	 * soc node name in existing dts files -- once that is fixed,
+	 * this can do a simple path lookup.
+	 */
+	soc = find_node_by_devtype(NULL, "soc");
+	if (soc) {
+		void *serial = NULL;
+
+		setprop(soc, "bus-frequency", &bd.bi_busfreq,
+		        sizeof(bd.bi_busfreq));
+
+		while ((serial = find_node_by_devtype(serial, "serial"))) {
+			if (get_parent(serial) != soc)
+				continue;
+
+			setprop(serial, "clock-frequency", &bd.bi_busfreq,
+			        sizeof(bd.bi_busfreq));
+		}
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+	unsigned long end_of_ram = bd.bi_memstart + bd.bi_memsize;
+	unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+
+	memcpy(&bd, (bd_t *)r3, sizeof(bd));
+	loader_info.initrd_addr = r4;
+	loader_info.initrd_size = r4 ? r5 : 0;
+	loader_info.cmdline = (char *)r6;
+	loader_info.cmdline_len = r7 - r6;
+
+	simple_alloc_init(_end, avail_ram - 1024*1024, 32, 64);
+	ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+}
diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c
new file mode 100644
index 000000000000..f88ba00ac122
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-85xx.c
@@ -0,0 +1,69 @@
+/*
+ * Old U-boot compatibility for 85xx
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+
+#define TARGET_85xx
+#include "ppcboot.h"
+
+static bd_t bd;
+extern char _end[];
+extern char _dtb_start[], _dtb_end[];
+
+static void platform_fixups(void)
+{
+	void *soc;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr,
+	                       bd.bi_enet2addr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq);
+
+	/* Unfortunately, the specific model number is encoded in the
+	 * soc node name in existing dts files -- once that is fixed,
+	 * this can do a simple path lookup.
+	 */
+	soc = find_node_by_devtype(NULL, "soc");
+	if (soc) {
+		void *serial = NULL;
+
+		setprop(soc, "bus-frequency", &bd.bi_busfreq,
+		        sizeof(bd.bi_busfreq));
+
+		while ((serial = find_node_by_devtype(serial, "serial"))) {
+			if (get_parent(serial) != soc)
+				continue;
+
+			setprop(serial, "clock-frequency", &bd.bi_busfreq,
+			        sizeof(bd.bi_busfreq));
+		}
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+                   unsigned long r6, unsigned long r7)
+{
+	unsigned long end_of_ram = bd.bi_memstart + bd.bi_memsize;
+	unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+
+	memcpy(&bd, (bd_t *)r3, sizeof(bd));
+	loader_info.initrd_addr = r4;
+	loader_info.initrd_size = r4 ? r5 : 0;
+	loader_info.cmdline = (char *)r6;
+	loader_info.cmdline_len = r7 - r6;
+
+	simple_alloc_init(_end, avail_ram - 1024*1024, 32, 64);
+	ft_init(_dtb_start, _dtb_end - _dtb_start, 32);
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+}
diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
new file mode 100644
index 000000000000..c9951550ed2c
--- /dev/null
+++ b/arch/powerpc/boot/devtree.c
@@ -0,0 +1,307 @@
+/*
+ * devtree.c - convenience functions for device tree manipulation
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * Authors: David Gibson <david@gibson.dropbear.id.au>
+ *	    Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+
+void dt_fixup_memory(u64 start, u64 size)
+{
+	void *root, *memory;
+	int naddr, nsize, i;
+	u32 memreg[4];
+
+	root = finddevice("/");
+	if (getprop(root, "#address-cells", &naddr, sizeof(naddr)) < 0)
+		naddr = 2;
+	if (naddr < 1 || naddr > 2)
+		fatal("Can't cope with #address-cells == %d in /\n\r", naddr);
+
+	if (getprop(root, "#size-cells", &nsize, sizeof(nsize)) < 0)
+		nsize = 1;
+	if (nsize < 1 || nsize > 2)
+		fatal("Can't cope with #size-cells == %d in /\n\r", nsize);
+
+	i = 0;
+	if (naddr == 2)
+		memreg[i++] = start >> 32;
+	memreg[i++] = start & 0xffffffff;
+	if (nsize == 2)
+		memreg[i++] = size >> 32;
+	memreg[i++] = size & 0xffffffff;
+
+	memory = finddevice("/memory");
+	if (! memory) {
+		memory = create_node(NULL, "memory");
+		setprop_str(memory, "device_type", "memory");
+	}
+
+	printf("Memory <- <0x%x", memreg[0]);
+	for (i = 1; i < (naddr + nsize); i++)
+		printf(" 0x%x", memreg[i]);
+	printf("> (%ldMB)\n\r", (unsigned long)(size >> 20));
+
+	setprop(memory, "reg", memreg, (naddr + nsize)*sizeof(u32));
+}
+
+#define MHZ(x)	((x + 500000) / 1000000)
+
+void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus)
+{
+	void *devp = NULL;
+
+	printf("CPU clock-frequency <- 0x%x (%dMHz)\n\r", cpu, MHZ(cpu));
+	printf("CPU timebase-frequency <- 0x%x (%dMHz)\n\r", tb, MHZ(tb));
+	if (bus > 0)
+		printf("CPU bus-frequency <- 0x%x (%dMHz)\n\r", bus, MHZ(bus));
+
+	while ((devp = find_node_by_devtype(devp, "cpu"))) {
+		setprop_val(devp, "clock-frequency", cpu);
+		setprop_val(devp, "timebase-frequency", tb);
+		if (bus > 0)
+			setprop_val(devp, "bus-frequency", bus);
+	}
+}
+
+void dt_fixup_clock(const char *path, u32 freq)
+{
+	void *devp = finddevice(path);
+
+	if (devp) {
+		printf("%s: clock-frequency <- %x (%dMHz)\n\r", path, freq, MHZ(freq));
+		setprop_val(devp, "clock-frequency", freq);
+	}
+}
+
+void __dt_fixup_mac_addresses(u32 startindex, ...)
+{
+	va_list ap;
+	u32 index = startindex;
+	void *devp;
+	const u8 *addr;
+
+	va_start(ap, startindex);
+	while ((addr = va_arg(ap, const u8 *))) {
+		devp = find_node_by_prop_value(NULL, "linux,network-index",
+					       (void*)&index, sizeof(index));
+
+		printf("ENET%d: local-mac-address <-"
+		       " %02x:%02x:%02x:%02x:%02x:%02x\n\r", index,
+		       addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+		if (devp)
+			setprop(devp, "local-mac-address", addr, 6);
+
+		index++;
+	}
+	va_end(ap);
+}
+
+#define MAX_ADDR_CELLS 4
+#define MAX_RANGES 8
+
+static void get_reg_format(void *node, u32 *naddr, u32 *nsize)
+{
+	if (getprop(node, "#address-cells", naddr, 4) != 4)
+		*naddr = 2;
+	if (getprop(node, "#size-cells", nsize, 4) != 4)
+		*nsize = 1;
+}
+
+static void copy_val(u32 *dest, u32 *src, int naddr)
+{
+	int pad = MAX_ADDR_CELLS - naddr;
+
+	memset(dest, 0, pad * 4);
+	memcpy(dest + pad, src, naddr * 4);
+}
+
+static int sub_reg(u32 *reg, u32 *sub)
+{
+	int i, borrow = 0;
+
+	for (i = MAX_ADDR_CELLS - 1; i >= 0; i--) {
+		int prev_borrow = borrow;
+		borrow = reg[i] < sub[i] + prev_borrow;
+		reg[i] -= sub[i] + prev_borrow;
+	}
+
+	return !borrow;
+}
+
+static int add_reg(u32 *reg, u32 *add, int naddr)
+{
+	int i, carry = 0;
+
+	for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) {
+		u64 tmp = (u64)reg[i] + add[i] + carry;
+		carry = tmp >> 32;
+		reg[i] = (u32)tmp;
+	}
+
+	return !carry;
+}
+
+/* It is assumed that if the first byte of reg fits in a
+ * range, then the whole reg block fits.
+ */
+static int compare_reg(u32 *reg, u32 *range, u32 *rangesize)
+{
+	int i;
+	u32 end;
+
+	for (i = 0; i < MAX_ADDR_CELLS; i++) {
+		if (reg[i] < range[i])
+			return 0;
+		if (reg[i] > range[i])
+			break;
+	}
+
+	for (i = 0; i < MAX_ADDR_CELLS; i++) {
+		end = range[i] + rangesize[i];
+
+		if (reg[i] < end)
+			break;
+		if (reg[i] > end)
+			return 0;
+	}
+
+	return reg[i] != end;
+}
+
+/* reg must be MAX_ADDR_CELLS */
+static int find_range(u32 *reg, u32 *ranges, int nregaddr,
+                      int naddr, int nsize, int buflen)
+{
+	int nrange = nregaddr + naddr + nsize;
+	int i;
+
+	for (i = 0; i + nrange <= buflen; i += nrange) {
+		u32 range_addr[MAX_ADDR_CELLS];
+		u32 range_size[MAX_ADDR_CELLS];
+
+		copy_val(range_addr, ranges + i, naddr);
+		copy_val(range_size, ranges + i + nregaddr + naddr, nsize);
+
+		if (compare_reg(reg, range_addr, range_size))
+			return i;
+	}
+
+	return -1;
+}
+
+/* Currently only generic buses without special encodings are supported.
+ * In particular, PCI is not supported.  Also, only the beginning of the
+ * reg block is tracked; size is ignored except in ranges.
+ */
+static u32 dt_xlate_buf[MAX_ADDR_CELLS * MAX_RANGES * 3];
+
+static int dt_xlate(void *node, int res, int reglen, unsigned long *addr,
+		unsigned long *size)
+{
+	u32 last_addr[MAX_ADDR_CELLS];
+	u32 this_addr[MAX_ADDR_CELLS];
+	void *parent;
+	u64 ret_addr, ret_size;
+	u32 naddr, nsize, prev_naddr;
+	int buflen, offset;
+
+	parent = get_parent(node);
+	if (!parent)
+		return 0;
+
+	get_reg_format(parent, &naddr, &nsize);
+
+	if (nsize > 2)
+		return 0;
+
+	offset = (naddr + nsize) * res;
+
+	if (reglen < offset + naddr + nsize ||
+	    sizeof(dt_xlate_buf) < offset + naddr + nsize)
+		return 0;
+
+	copy_val(last_addr, dt_xlate_buf + offset, naddr);
+
+	ret_size = dt_xlate_buf[offset + naddr];
+	if (nsize == 2) {
+		ret_size <<= 32;
+		ret_size |= dt_xlate_buf[offset + naddr + 1];
+	}
+
+	while ((node = get_parent(node))) {
+		prev_naddr = naddr;
+
+		get_reg_format(node, &naddr, &nsize);
+
+		buflen = getprop(node, "ranges", dt_xlate_buf,
+				sizeof(dt_xlate_buf));
+		if (buflen < 0)
+			continue;
+		if (buflen > sizeof(dt_xlate_buf))
+			return 0;
+
+		offset = find_range(last_addr, dt_xlate_buf, prev_naddr,
+		                    naddr, nsize, buflen / 4);
+
+		if (offset < 0)
+			return 0;
+
+		copy_val(this_addr, dt_xlate_buf + offset, prev_naddr);
+
+		if (!sub_reg(last_addr, this_addr))
+			return 0;
+
+		copy_val(this_addr, dt_xlate_buf + offset + prev_naddr, naddr);
+
+		if (!add_reg(last_addr, this_addr, naddr))
+			return 0;
+	}
+
+	if (naddr > 2)
+		return 0;
+
+	ret_addr = ((u64)last_addr[2] << 32) | last_addr[3];
+
+	if (sizeof(void *) == 4 &&
+	    (ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL ||
+	     ret_addr + ret_size > 0x100000000ULL))
+		return 0;
+
+	*addr = ret_addr;
+	if (size)
+		*size = ret_size;
+
+	return 1;
+}
+
+int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size)
+{
+	int reglen;
+
+	reglen = getprop(node, "reg", dt_xlate_buf, sizeof(dt_xlate_buf)) / 4;
+	return dt_xlate(node, res, reglen, addr, size);
+}
+
+int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr)
+{
+
+	if (buflen > sizeof(dt_xlate_buf))
+		return 0;
+
+	memcpy(dt_xlate_buf, buf, buflen);
+	return dt_xlate(node, 0, buflen / 4, xlated_addr, NULL);
+}
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 096e94ac415f..157dc98d3988 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -29,13 +29,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
 
 	cpus {
 		linux,phandle = <2000>;
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		PowerPC,603e { /* Really 8241 */
 			linux,phandle = <2100>;
-			linux,boot-cpu;
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <bebc200>;	/* Fixed by bootwrapper */
@@ -127,17 +125,17 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
 			interrupt-parent = <4400>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
-				/* IDSEL 0x11 - IRQ0 ETH */
+				/* IDSEL 11 - IRQ0 ETH */
 				5800 0 0 1 4400 0 1
 				5800 0 0 2 4400 1 1
 				5800 0 0 3 4400 2 1
 				5800 0 0 4 4400 3 1
-				/* IDSEL 0x12 - IRQ1 IDE0 */
+				/* IDSEL 12 - IRQ1 IDE0 */
 				6000 0 0 1 4400 1 1
 				6000 0 0 2 4400 2 1
 				6000 0 0 3 4400 3 1
 				6000 0 0 4 4400 0 1
-				/* IDSEL 0x14 - IRQ3 USB2.0 */
+				/* IDSEL 14 - IRQ3 USB2.0 */
 				7000 0 0 1 4400 3 1
 				7000 0 0 2 4400 3 1
 				7000 0 0 3 4400 3 1
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index d06b0b018899..919eb29097db 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -29,13 +29,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
 
 	cpus {
 		linux,phandle = <2000>;
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		PowerPC,603e { /* Really 8241 */
 			linux,phandle = <2100>;
-			linux,boot-cpu;
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <fdad680>;	/* Fixed by bootwrapper */
@@ -127,17 +125,17 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
 			interrupt-parent = <4400>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
-				/* IDSEL 0x11 - IRQ0 ETH */
+				/* IDSEL 11 - IRQ0 ETH */
 				5800 0 0 1 4400 0 1
 				5800 0 0 2 4400 1 1
 				5800 0 0 3 4400 2 1
 				5800 0 0 4 4400 3 1
-				/* IDSEL 0x12 - IRQ1 IDE0 */
+				/* IDSEL 12 - IRQ1 IDE0 */
 				6000 0 0 1 4400 1 1
 				6000 0 0 2 4400 2 1
 				6000 0 0 3 4400 3 1
 				6000 0 0 4 4400 0 1
-				/* IDSEL 0x14 - IRQ3 USB2.0 */
+				/* IDSEL 14 - IRQ3 USB2.0 */
 				7000 0 0 1 4400 3 1
 				7000 0 0 2 4400 3 1
 				7000 0 0 3 4400 3 1
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index c03103c63285..ba54c6b40a09 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -24,7 +24,6 @@
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 3875ca9a9a62..2e003081b0d3 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -24,7 +24,6 @@
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index c4d9562cbaad..6fa3754f293a 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -19,7 +19,6 @@
 	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells =<0>;
 		linux,phandle = <200>;
@@ -36,7 +35,6 @@
 			bus-frequency = <0>;		// From U-Boot
 			32-bit;
 			linux,phandle = <201>;
-			linux,boot-cpu;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 26b44f7513dc..423eedcf634f 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -17,7 +17,6 @@
        linux,phandle = <100>;
 
        cpus {
-               #cpus = <1>;
                #address-cells = <1>;
                #size-cells = <0>;
                linux,phandle = <200>;
@@ -34,7 +33,6 @@
                        clock-frequency = <0>;
                        32-bit;
                        linux,phandle = <201>;
-                       linux,boot-cpu;
                };
        };
 
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3d2f5a06df3f..a1533cc07d09 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -11,12 +11,11 @@
 
 / {
 	model = "MPC8313ERDB";
-	compatible = "MPC83xx";
+	compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -59,7 +58,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -68,7 +67,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -77,7 +76,7 @@
 			compatible = "mpc83xx_spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			mode = <0>;
 		};
 
@@ -88,8 +87,8 @@
 			reg = <23000 1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = <700>;
-			interrupts = <26 2>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
 			phy_type = "utmi_wide";
 		};
 
@@ -99,18 +98,15 @@
 			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			linux,phandle = <24520>;
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <700>;
-				interrupts = <13 2>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = < &ipic >;
+				interrupts = <13 8>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@4 {
-				linux,phandle = <2452004>;
-				interrupt-parent = <700>;
-				interrupts = <14 2>;
+			phy4: ethernet-phy@4 {
+				interrupt-parent = < &ipic >;
+				interrupts = <14 8>;
 				reg = <4>;
 				device_type = "ethernet-phy";
 			};
@@ -123,8 +119,8 @@
 			reg = <24000 1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <25 8 24 8 23 8>;
-			interrupt-parent = <700>;
-			phy-handle = <2452001>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy1 >;
 		};
 
 		ethernet@25000 {
@@ -134,8 +130,8 @@
 			reg = <25000 1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <22 8 21 8 20 8>;
-			interrupt-parent = <700>;
-			phy-handle = <2452004>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy4 >;
 		};
 
 		serial@4500 {
@@ -144,7 +140,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;
 			interrupts = <9 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		serial@4600 {
@@ -153,7 +149,7 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;
 			interrupts = <a 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		pci@8500 {
@@ -161,17 +157,17 @@
 			interrupt-map = <
 
 					/* IDSEL 0x0E -mini PCI */
-					 7000 0 0 1 700 12 8
-					 7000 0 0 2 700 12 8
-					 7000 0 0 3 700 12 8
-					 7000 0 0 4 700 12 8
+					 7000 0 0 1 &ipic 12 8
+					 7000 0 0 2 &ipic 12 8
+					 7000 0 0 3 &ipic 12 8
+					 7000 0 0 4 &ipic 12 8
 
 					/* IDSEL 0x0F - PCI slot */
-					 7800 0 0 1 700 11 8
-					 7800 0 0 2 700 12 8
-					 7800 0 0 3 700 11 8
-					 7800 0 0 4 700 12 8>;
-			interrupt-parent = <700>;
+					 7800 0 0 1 &ipic 11 8
+					 7800 0 0 2 &ipic 12 8
+					 7800 0 0 3 &ipic 11 8
+					 7800 0 0 4 &ipic 12 8>;
+			interrupt-parent = < &ipic >;
 			interrupts = <42 8>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 90000000 90000000 0 10000000
@@ -192,7 +188,7 @@
 			compatible = "talitos";
 			reg = <30000 7000>;
 			interrupts = <b 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			/* Rev. 2.2 */
 			num-channels = <1>;
 			channel-fifo-len = <18>;
@@ -206,8 +202,7 @@
 		 * sense == 8: Level, low assertion
 		 * sense == 2: Edge, high-to-low change
 		 */
-		pic@700 {
-			linux,phandle = <700>;
+		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index fa7ef24d205b..c798491f4cd0 100644
--- a/arch/powerpc/boot/dts/mpc8323emds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -11,16 +11,13 @@
 
 / {
 	model = "MPC8323EMDS";
-	compatible = "MPC83xx";
+	compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8323@0 {
 			device_type = "cpu";
@@ -33,14 +30,11 @@
 			bus-frequency = <0>;
 			clock-frequency = <0>;
 			32-bit;
-			linux,phandle = <201>;
-			linux,boot-cpu;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 08000000>;
 	};
 
@@ -69,7 +63,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -79,7 +73,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;
 			interrupts = <9 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		serial@4600 {
@@ -88,7 +82,7 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;
 			interrupts = <a 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		crypto@30000 {
@@ -97,7 +91,7 @@
 			compatible = "talitos";
 			reg = <30000 7000>;
 			interrupts = <b 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			/* Rev. 2.2 */
 			num-channels = <1>;
 			channel-fifo-len = <18>;
@@ -106,51 +100,50 @@
 		};
 
 		pci@8500 {
-			linux,phandle = <8500>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 					/* IDSEL 0x11 AD17 */
-					 8800 0 0 1 700 14 8
-					 8800 0 0 2 700 15 8
-					 8800 0 0 3 700 16 8
-					 8800 0 0 4 700 17 8
+					 8800 0 0 1 &ipic 14 8
+					 8800 0 0 2 &ipic 15 8
+					 8800 0 0 3 &ipic 16 8
+					 8800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x12 AD18 */
-					 9000 0 0 1 700 16 8
-					 9000 0 0 2 700 17 8
-					 9000 0 0 3 700 14 8
-					 9000 0 0 4 700 15 8
+					 9000 0 0 1 &ipic 16 8
+					 9000 0 0 2 &ipic 17 8
+					 9000 0 0 3 &ipic 14 8
+					 9000 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x13 AD19 */
-					 9800 0 0 1 700 17 8
-					 9800 0 0 2 700 14 8
-					 9800 0 0 3 700 15 8
-					 9800 0 0 4 700 16 8
+					 9800 0 0 1 &ipic 17 8
+					 9800 0 0 2 &ipic 14 8
+					 9800 0 0 3 &ipic 15 8
+					 9800 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x15 AD21*/
-					 a800 0 0 1 700 14 8
-					 a800 0 0 2 700 15 8
-					 a800 0 0 3 700 16 8
-					 a800 0 0 4 700 17 8
+					 a800 0 0 1 &ipic 14 8
+					 a800 0 0 2 &ipic 15 8
+					 a800 0 0 3 &ipic 16 8
+					 a800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x16 AD22*/
-					 b000 0 0 1 700 17 8
-					 b000 0 0 2 700 14 8
-					 b000 0 0 3 700 15 8
-					 b000 0 0 4 700 16 8
+					 b000 0 0 1 &ipic 17 8
+					 b000 0 0 2 &ipic 14 8
+					 b000 0 0 3 &ipic 15 8
+					 b000 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x17 AD23*/
-					 b800 0 0 1 700 16 8
-					 b800 0 0 2 700 17 8
-					 b800 0 0 3 700 14 8
-					 b800 0 0 4 700 15 8
+					 b800 0 0 1 &ipic 16 8
+					 b800 0 0 2 &ipic 17 8
+					 b800 0 0 3 &ipic 14 8
+					 b800 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x18 AD24*/
-					 c000 0 0 1 700 15 8
-					 c000 0 0 2 700 16 8
-					 c000 0 0 3 700 17 8
-					 c000 0 0 4 700 14 8>;
-			interrupt-parent = <700>;
+					 c000 0 0 1 &ipic 15 8
+					 c000 0 0 2 &ipic 16 8
+					 c000 0 0 3 &ipic 17 8
+					 c000 0 0 4 &ipic 14 8>;
+			interrupt-parent = < &ipic >;
 			interrupts = <42 8>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 a0000000 90000000 0 10000000
@@ -165,8 +158,7 @@
 			device_type = "pci";
 		};
 
-		pic@700 {
-			linux,phandle = <700>;
+		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
@@ -180,8 +172,7 @@
 			device_type = "par_io";
 			num-ports = <7>;
 
-			ucc_pin@03 {
-				linux,phandle = <140003>;
+			pio3: ucc_pin@03 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					3  4  3  0  2  0  /* MDIO */
@@ -204,8 +195,7 @@
 					1  c  1  0  1  0 	/* TX_EN */
 					1  d  2  0  1  0>;/* CRS */
 			};
-			ucc_pin@04 {
-				linux,phandle = <140004>;
+			pio4: ucc_pin@04 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					3 1f  2  0  1  0 	/* RX_CLK (CLK7) */
@@ -252,7 +242,7 @@
 			compatible = "fsl_spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mode = "cpu";
 		};
 
@@ -261,7 +251,7 @@
 			compatible = "fsl_spi";
 			reg = <500 40>;
 			interrupts = <1>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mode = "cpu";
 		};
 
@@ -270,7 +260,7 @@
 			compatible = "qe_udc";
 			reg = <6c0 40 8B00 100>;
 			interrupts = <b>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mode = "slave";
 		};
 
@@ -281,12 +271,12 @@
 			device-id = <3>;
 			reg = <2200 200>;
 			interrupts = <22>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mac-address = [ 00 04 9f 00 23 23 ];
 			rx-clock = <19>;
 			tx-clock = <1a>;
-			phy-handle = <212003>;
-			pio-handle = <140003>;
+			phy-handle = < &phy3 >;
+			pio-handle = < &pio3 >;
 		};
 
 		ucc@3200 {
@@ -296,12 +286,12 @@
 			device-id = <4>;
 			reg = <3000 200>;
 			interrupts = <23>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mac-address = [ 00 11 22 33 44 55 ];
 			rx-clock = <17>;
 			tx-clock = <18>;
-			phy-handle = <212004>;
-			pio-handle = <140004>;
+			phy-handle = < &phy4 >;
+			pio-handle = < &pio4 >;
 		};
 
 		mdio@2320 {
@@ -311,26 +301,23 @@
 			device_type = "mdio";
 			compatible = "ucc_geth_phy";
 
-			ethernet-phy@03 {
-				linux,phandle = <212003>;
-				interrupt-parent = <700>;
-				interrupts = <11 2>;
+			phy3: ethernet-phy@03 {
+				interrupt-parent = < &ipic >;
+				interrupts = <11 8>;
 				reg = <3>;
 				device_type = "ethernet-phy";
 				interface = <3>; //ENET_100_MII
 			};
-			ethernet-phy@04 {
-				linux,phandle = <212004>;
-				interrupt-parent = <700>;
-				interrupts = <12 2>;
+			phy4: ethernet-phy@04 {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
 				reg = <4>;
 				device_type = "ethernet-phy";
 				interface = <3>;
 			};
 		};
 
-		qeic@80 {
-			linux,phandle = <80>;
+		qeic: qeic@80 {
 			interrupt-controller;
 			device_type = "qeic";
 			#address-cells = <0>;
@@ -339,7 +326,7 @@
 			built-in;
 			big-endian;
 			interrupts = <20 8 21 8>; //high:32 low:33
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
new file mode 100644
index 000000000000..b55bced1593d
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -0,0 +1,291 @@
+/*
+ * MPC832x RDB Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8323ERDB";
+	compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8323@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 04000000>;
+	};
+
+	soc8323@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <&pic>;
+			dfsrr;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <&pic>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <&pic>;
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 7000>;
+			interrupts = <b 8>;
+			interrupt-parent = <&pic>;
+			/* Rev. 2.2 */
+			num-channels = <1>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000004c>;
+			descriptor-types-mask = <0122003f>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+					/* IDSEL 0x10 AD16 (USB) */
+					 8000 0 0 1 &pic 11 8
+
+					/* IDSEL 0x11 AD17 (Mini1)*/
+					 8800 0 0 1 &pic 12 8
+					 8800 0 0 2 &pic 13 8
+					 8800 0 0 3 &pic 14 8
+					 8800 0 0 4 &pic 30 8
+
+					/* IDSEL 0x12 AD18 (PCI/Mini2) */
+					 9000 0 0 1 &pic 13 8
+					 9000 0 0 2 &pic 14 8
+					 9000 0 0 3 &pic 30 8
+					 9000 0 0 4 &pic 11 8>;
+
+			interrupt-parent = <&pic>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <42000000 0 80000000 80000000 0 10000000
+			          02000000 0 90000000 90000000 0 10000000
+			          01000000 0 d0000000 d0000000 0 04000000>;
+			clock-frequency = <0>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		pic:pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+
+		par_io@1400 {
+			reg = <1400 100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			ucc2pio:ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					3  4  3  0  2  0 	/* MDIO */
+					3  5  1  0  2  0 	/* MDC */
+					3 15  2  0  1  0 	/* RX_CLK (CLK16) */
+					3 17  2  0  1  0 	/* TX_CLK (CLK3) */
+					0 12  1  0  1  0 	/* TxD0 */
+					0 13  1  0  1  0 	/* TxD1 */
+					0 14  1  0  1  0 	/* TxD2 */
+					0 15  1  0  1  0 	/* TxD3 */
+					0 16  2  0  1  0 	/* RxD0 */
+					0 17  2  0  1  0 	/* RxD1 */
+					0 18  2  0  1  0 	/* RxD2 */
+					0 19  2  0  1  0 	/* RxD3 */
+					0 1a  2  0  1  0 	/* RX_ER */
+					0 1b  1  0  1  0 	/* TX_ER */
+					0 1c  2  0  1  0 	/* RX_DV */
+					0 1d  2  0  1  0 	/* COL */
+					0 1e  1  0  1  0 	/* TX_EN */
+					0 1f  2  0  1  0>;      /* CRS */
+			};
+			ucc3pio:ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0  d  2  0  1  0 	/* RX_CLK (CLK9) */
+					3 18  2  0  1  0 	/* TX_CLK (CLK10) */
+					1  0  1  0  1  0 	/* TxD0 */
+					1  1  1  0  1  0 	/* TxD1 */
+					1  2  1  0  1  0 	/* TxD2 */
+					1  3  1  0  1  0 	/* TxD3 */
+					1  4  2  0  1  0 	/* RxD0 */
+					1  5  2  0  1  0 	/* RxD1 */
+					1  6  2  0  1  0 	/* RxD2 */
+					1  7  2  0  1  0 	/* RxD3 */
+					1  8  2  0  1  0 	/* RX_ER */
+					1  9  1  0  1  0 	/* TX_ER */
+					1  a  2  0  1  0 	/* RX_DV */
+					1  b  2  0  1  0 	/* COL */
+					1  c  1  0  1  0 	/* TX_EN */
+					1  d  2  0  1  0>;      /* CRS */
+			};
+		};
+	};
+
+	qe@e0100000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		model = "QE";
+		ranges = <0 e0100000 00100000>;
+		reg = <e0100000 480>;
+		brg-frequency = <0>;
+		bus-frequency = <BCD3D80>;
+
+		muram@10000 {
+			device_type = "muram";
+			ranges = <0 00010000 00004000>;
+
+			data-only@0 {
+				reg = <0 4000>;
+			};
+		};
+
+		spi@4c0 {
+			device_type = "spi";
+			compatible = "fsl_spi";
+			reg = <4c0 40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		spi@500 {
+			device_type = "spi";
+			compatible = "fsl_spi";
+			reg = <500 40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			model = "UCC";
+			device-id = <2>;
+			reg = <3000 200>;
+			interrupts = <21>;
+			interrupt-parent = <&qeic>;
+			mac-address = [ 00 04 9f ef 03 02 ];
+			rx-clock = <20>;
+			tx-clock = <13>;
+			phy-handle = <&phy00>;
+			pio-handle = <&ucc2pio>;
+		};
+
+		ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			model = "UCC";
+			device-id = <3>;
+			reg = <2200 200>;
+			interrupts = <22>;
+			interrupt-parent = <&qeic>;
+			mac-address = [ 00 04 9f ef 03 01 ];
+			rx-clock = <19>;
+			tx-clock = <1a>;
+			phy-handle = <&phy04>;
+			pio-handle = <&ucc3pio>;
+		};
+
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3120 18>;
+			device_type = "mdio";
+			compatible = "ucc_geth_phy";
+
+			phy00:ethernet-phy@00 {
+				interrupt-parent = <&pic>;
+				interrupts = <0>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+				interface = <3>; //ENET_100_MII
+			};
+			phy04:ethernet-phy@04 {
+				interrupt-parent = <&pic>;
+				interrupts = <0>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+				interface = <3>;
+			};
+		};
+
+		qeic:qeic@80 {
+			interrupt-controller;
+			device_type = "qeic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <80 80>;
+			built-in;
+			big-endian;
+			interrupts = <20 8 21 8>; //high:32 low:33
+			interrupt-parent = <&pic>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 27807fc45888..db0d00303275 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -10,12 +10,11 @@
  */
 / {
 	model = "MPC8349EMITX";
-	compatible = "MPC834xMITX";
+	compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -58,7 +57,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -67,7 +66,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -76,7 +75,7 @@
 			compatible = "mpc83xx_spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			mode = <0>;
 		};
 
@@ -86,8 +85,8 @@
 			reg = <22000 1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = <700>;
-			interrupts = <27 2>;
+			interrupt-parent = < &ipic >;
+			interrupts = <27 8>;
 			phy_type = "ulpi";
 			port1;
 		};
@@ -98,8 +97,8 @@
 			reg = <23000 1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = <700>;
-			interrupts = <26 2>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
 			phy_type = "ulpi";
 		};
 
@@ -109,22 +108,19 @@
 			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			linux,phandle = <24520>;
 
 			/* Vitesse 8201 */
-			ethernet-phy@1c {
-				linux,phandle = <245201c>;
-				interrupt-parent = <700>;
-				interrupts = <12 2>;
+			phy1c: ethernet-phy@1c {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
 				reg = <1c>;
 				device_type = "ethernet-phy";
 			};
 
 			/* Vitesse 7385 */
-			ethernet-phy@1f {
-				linux,phandle = <245201f>;
-				interrupt-parent = <700>;
-				interrupts = <12 2>;
+			phy1f: ethernet-phy@1f {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
 				reg = <1f>;
 				device_type = "ethernet-phy";
 			};
@@ -138,8 +134,8 @@
 			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <20 8 21 8 22 8>;
-			interrupt-parent = <700>;
-			phy-handle = <245201c>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy1c >;
 		};
 
 		ethernet@25000 {
@@ -152,8 +148,8 @@
 			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 8 24 8 25 8>;
-			interrupt-parent = <700>;
-			phy-handle = <245201f>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy1f >;
 		};
 
 		serial@4500 {
@@ -162,7 +158,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <9 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		serial@4600 {
@@ -171,16 +167,16 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <a 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		pci@8500 {
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 					/* IDSEL 0x10 - SATA */
-					8000 0 0 1 700 16 8 /* SATA_INTA */
+					8000 0 0 1 &ipic 16 8 /* SATA_INTA */
 					>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			interrupts = <42 8>;
 			bus-range = <0 0>;
 			ranges = <42000000 0 80000000 80000000 0 10000000
@@ -199,13 +195,13 @@
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 					/* IDSEL 0x0E - MiniPCI Slot */
-					7000 0 0 1 700 15 8 /* PCI_INTA */
+					7000 0 0 1 &ipic 15 8 /* PCI_INTA */
 
 					/* IDSEL 0x0F - PCI Slot */
-					7800 0 0 1 700 14 8 /* PCI_INTA */
-					7800 0 0 2 700 15 8 /* PCI_INTB */
+					7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+					7800 0 0 2 &ipic 15 8 /* PCI_INTB */
 					 >;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			interrupts = <43 8>;
 			bus-range = <1 1>;
 			ranges = <42000000 0 a0000000 a0000000 0 10000000
@@ -226,15 +222,14 @@
 			compatible = "talitos";
 			reg = <30000 10000>;
 			interrupts = <b 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <0000007e>;
 			descriptor-types-mask = <01010ebf>;
 		};
 
-		pic@700 {
-			linux,phandle = <700>;
+		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 3190774de1d8..f636528a3c72 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -10,12 +10,11 @@
  */
 / {
 	model = "MPC8349EMITXGP";
-	compatible = "MPC834xMITXGP";
+	compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -58,7 +57,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -67,7 +66,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -76,7 +75,7 @@
 			compatible = "mpc83xx_spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			mode = <0>;
 		};
 
@@ -86,8 +85,8 @@
 			reg = <23000 1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = <700>;
-			interrupts = <26 2>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
 		};
@@ -98,13 +97,11 @@
 			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			linux,phandle = <24520>;
 
 			/* Vitesse 8201 */
-			ethernet-phy@1c {
-				linux,phandle = <245201c>;
-				interrupt-parent = <700>;
-				interrupts = <12 2>;
+			phy1c: ethernet-phy@1c {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
 				reg = <1c>;
 				device_type = "ethernet-phy";
 			};
@@ -117,8 +114,8 @@
 			reg = <24000 1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <20 8 21 8 22 8>;
-			interrupt-parent = <700>;
-			phy-handle = <245201c>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy1c >;
 		};
 
 		serial@4500 {
@@ -127,7 +124,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <9 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		serial@4600 {
@@ -136,17 +133,17 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;		// from bootloader
 			interrupts = <a 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		pci@8600 {
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 					/* IDSEL 0x0F - PCI Slot */
-					7800 0 0 1 700 14 8 /* PCI_INTA */
-					7800 0 0 2 700 15 8 /* PCI_INTB */
+					7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+					7800 0 0 2 &ipic 15 8 /* PCI_INTB */
 					 >;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			interrupts = <43 8>;
 			bus-range = <1 1>;
 			ranges = <42000000 0 a0000000 a0000000 0 10000000
@@ -167,15 +164,14 @@
 			compatible = "talitos";
 			reg = <30000 10000>;
 			interrupts = <b 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <0000007e>;
 			descriptor-types-mask = <01010ebf>;
 		};
 
-		pic@700 {
-			linux,phandle = <700>;
+		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index dc121b3cb4a9..07bcc5194d2b 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -11,12 +11,11 @@
 
 / {
 	model = "MPC8349EMDS";
-	compatible = "MPC834xMDS";
+	compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -64,7 +63,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -73,7 +72,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -82,7 +81,7 @@
 			compatible = "mpc83xx_spi";
 			reg = <7000 1000>;
 			interrupts = <10 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			mode = <0>;
 		};
 
@@ -94,8 +93,8 @@
 			reg = <22000 1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = <700>;
-			interrupts = <27 2>;
+			interrupt-parent = < &ipic >;
+			interrupts = <27 8>;
 			phy_type = "ulpi";
 			port1;
 		};
@@ -106,8 +105,8 @@
 			reg = <23000 1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupt-parent = <700>;
-			interrupts = <26 2>;
+			interrupt-parent = < &ipic >;
+			interrupts = <26 8>;
 			dr_mode = "otg";
 			phy_type = "ulpi";
 		};
@@ -118,18 +117,15 @@
 			reg = <24520 20>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <700>;
-				interrupts = <11 2>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = < &ipic >;
+				interrupts = <11 8>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <700>;
-				interrupts = <12 2>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
@@ -143,8 +139,8 @@
 			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <20 8 21 8 22 8>;
-			interrupt-parent = <700>;
-			phy-handle = <2452000>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy0 >;
 		};
 
 		ethernet@25000 {
@@ -157,8 +153,8 @@
 			address = [ 00 00 00 00 00 00 ];
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <23 8 24 8 25 8>;
-			interrupt-parent = <700>;
-			phy-handle = <2452001>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy1 >;
 		};
 
 		serial@4500 {
@@ -167,7 +163,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;
 			interrupts = <9 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		serial@4600 {
@@ -176,7 +172,7 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;
 			interrupts = <a 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		pci@8500 {
@@ -184,47 +180,47 @@
 			interrupt-map = <
 
 					/* IDSEL 0x11 */
-					 8800 0 0 1 700 14 8
-					 8800 0 0 2 700 15 8
-					 8800 0 0 3 700 16 8
-					 8800 0 0 4 700 17 8
+					 8800 0 0 1 &ipic 14 8
+					 8800 0 0 2 &ipic 15 8
+					 8800 0 0 3 &ipic 16 8
+					 8800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x12 */
-					 9000 0 0 1 700 16 8
-					 9000 0 0 2 700 17 8
-					 9000 0 0 3 700 14 8
-					 9000 0 0 4 700 15 8
+					 9000 0 0 1 &ipic 16 8
+					 9000 0 0 2 &ipic 17 8
+					 9000 0 0 3 &ipic 14 8
+					 9000 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x13 */
-					 9800 0 0 1 700 17 8
-					 9800 0 0 2 700 14 8
-					 9800 0 0 3 700 15 8
-					 9800 0 0 4 700 16 8
+					 9800 0 0 1 &ipic 17 8
+					 9800 0 0 2 &ipic 14 8
+					 9800 0 0 3 &ipic 15 8
+					 9800 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x15 */
-					 a800 0 0 1 700 14 8
-					 a800 0 0 2 700 15 8
-					 a800 0 0 3 700 16 8
-					 a800 0 0 4 700 17 8
+					 a800 0 0 1 &ipic 14 8
+					 a800 0 0 2 &ipic 15 8
+					 a800 0 0 3 &ipic 16 8
+					 a800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x16 */
-					 b000 0 0 1 700 17 8
-					 b000 0 0 2 700 14 8
-					 b000 0 0 3 700 15 8
-					 b000 0 0 4 700 16 8
+					 b000 0 0 1 &ipic 17 8
+					 b000 0 0 2 &ipic 14 8
+					 b000 0 0 3 &ipic 15 8
+					 b000 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x17 */
-					 b800 0 0 1 700 16 8
-					 b800 0 0 2 700 17 8
-					 b800 0 0 3 700 14 8
-					 b800 0 0 4 700 15 8
+					 b800 0 0 1 &ipic 16 8
+					 b800 0 0 2 &ipic 17 8
+					 b800 0 0 3 &ipic 14 8
+					 b800 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x18 */
-					 c000 0 0 1 700 15 8
-					 c000 0 0 2 700 16 8
-					 c000 0 0 3 700 17 8
-					 c000 0 0 4 700 14 8>;
-			interrupt-parent = <700>;
+					 c000 0 0 1 &ipic 15 8
+					 c000 0 0 2 &ipic 16 8
+					 c000 0 0 3 &ipic 17 8
+					 c000 0 0 4 &ipic 14 8>;
+			interrupt-parent = < &ipic >;
 			interrupts = <42 8>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 a0000000 a0000000 0 10000000
@@ -244,47 +240,47 @@
 			interrupt-map = <
 
 					/* IDSEL 0x11 */
-					 8800 0 0 1 700 14 8
-					 8800 0 0 2 700 15 8
-					 8800 0 0 3 700 16 8
-					 8800 0 0 4 700 17 8
+					 8800 0 0 1 &ipic 14 8
+					 8800 0 0 2 &ipic 15 8
+					 8800 0 0 3 &ipic 16 8
+					 8800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x12 */
-					 9000 0 0 1 700 16 8
-					 9000 0 0 2 700 17 8
-					 9000 0 0 3 700 14 8
-					 9000 0 0 4 700 15 8
+					 9000 0 0 1 &ipic 16 8
+					 9000 0 0 2 &ipic 17 8
+					 9000 0 0 3 &ipic 14 8
+					 9000 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x13 */
-					 9800 0 0 1 700 17 8
-					 9800 0 0 2 700 14 8
-					 9800 0 0 3 700 15 8
-					 9800 0 0 4 700 16 8
+					 9800 0 0 1 &ipic 17 8
+					 9800 0 0 2 &ipic 14 8
+					 9800 0 0 3 &ipic 15 8
+					 9800 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x15 */
-					 a800 0 0 1 700 14 8
-					 a800 0 0 2 700 15 8
-					 a800 0 0 3 700 16 8
-					 a800 0 0 4 700 17 8
+					 a800 0 0 1 &ipic 14 8
+					 a800 0 0 2 &ipic 15 8
+					 a800 0 0 3 &ipic 16 8
+					 a800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x16 */
-					 b000 0 0 1 700 17 8
-					 b000 0 0 2 700 14 8
-					 b000 0 0 3 700 15 8
-					 b000 0 0 4 700 16 8
+					 b000 0 0 1 &ipic 17 8
+					 b000 0 0 2 &ipic 14 8
+					 b000 0 0 3 &ipic 15 8
+					 b000 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x17 */
-					 b800 0 0 1 700 16 8
-					 b800 0 0 2 700 17 8
-					 b800 0 0 3 700 14 8
-					 b800 0 0 4 700 15 8
+					 b800 0 0 1 &ipic 16 8
+					 b800 0 0 2 &ipic 17 8
+					 b800 0 0 3 &ipic 14 8
+					 b800 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x18 */
-					 c000 0 0 1 700 15 8
-					 c000 0 0 2 700 16 8
-					 c000 0 0 3 700 17 8
-					 c000 0 0 4 700 14 8>;
-			interrupt-parent = <700>;
+					 c000 0 0 1 &ipic 15 8
+					 c000 0 0 2 &ipic 16 8
+					 c000 0 0 3 &ipic 17 8
+					 c000 0 0 4 &ipic 14 8>;
+			interrupt-parent = < &ipic >;
 			interrupts = <42 8>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 b0000000 b0000000 0 10000000
@@ -306,7 +302,7 @@
 			compatible = "talitos";
 			reg = <30000 10000>;
 			interrupts = <b 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <0000007e>;
@@ -321,8 +317,7 @@
 		 * sense == 8: Level, low assertion
 		 * sense == 2: Edge, high-to-low change
 		 */
-		pic@700 {
-			linux,phandle = <700>;
+		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 9022192155b9..7f578eb57082 100644
--- a/arch/powerpc/boot/dts/mpc8360emds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -15,17 +15,14 @@
 */
 
 / {
-	model = "MPC8360EPB";
-	compatible = "MPC83xx";
+	model = "MPC8360MDS";
+	compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8360@0 {
 			device_type = "cpu";
@@ -38,14 +35,11 @@
 			bus-frequency = <FBC5200>;
 			clock-frequency = <1F78A400>;
 			32-bit;
-			linux,phandle = <201>;
-			linux,boot-cpu;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 10000000>;
 	};
 
@@ -74,7 +68,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <e 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -83,7 +77,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			dfsrr;
 		};
 
@@ -93,7 +87,7 @@
 			reg = <4500 100>;
 			clock-frequency = <FBC5200>;
 			interrupts = <9 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		serial@4600 {
@@ -102,7 +96,7 @@
 			reg = <4600 100>;
 			clock-frequency = <FBC5200>;
 			interrupts = <a 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 		crypto@30000 {
@@ -111,7 +105,7 @@
 			compatible = "talitos";
 			reg = <30000 10000>;
 			interrupts = <b 8>;
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <0000007e>;
@@ -120,52 +114,51 @@
 		};
 
 		pci@8500 {
-			linux,phandle = <8500>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 
 					/* IDSEL 0x11 AD17 */
-					 8800 0 0 1 700 14 8
-					 8800 0 0 2 700 15 8
-					 8800 0 0 3 700 16 8
-					 8800 0 0 4 700 17 8
+					 8800 0 0 1 &ipic 14 8
+					 8800 0 0 2 &ipic 15 8
+					 8800 0 0 3 &ipic 16 8
+					 8800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x12 AD18 */
-					 9000 0 0 1 700 16 8
-					 9000 0 0 2 700 17 8
-					 9000 0 0 3 700 14 8
-					 9000 0 0 4 700 15 8
+					 9000 0 0 1 &ipic 16 8
+					 9000 0 0 2 &ipic 17 8
+					 9000 0 0 3 &ipic 14 8
+					 9000 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x13 AD19 */
-					 9800 0 0 1 700 17 8
-					 9800 0 0 2 700 14 8
-					 9800 0 0 3 700 15 8
-					 9800 0 0 4 700 16 8
+					 9800 0 0 1 &ipic 17 8
+					 9800 0 0 2 &ipic 14 8
+					 9800 0 0 3 &ipic 15 8
+					 9800 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x15 AD21*/
-					 a800 0 0 1 700 14 8
-					 a800 0 0 2 700 15 8
-					 a800 0 0 3 700 16 8
-					 a800 0 0 4 700 17 8
+					 a800 0 0 1 &ipic 14 8
+					 a800 0 0 2 &ipic 15 8
+					 a800 0 0 3 &ipic 16 8
+					 a800 0 0 4 &ipic 17 8
 
 					/* IDSEL 0x16 AD22*/
-					 b000 0 0 1 700 17 8
-					 b000 0 0 2 700 14 8
-					 b000 0 0 3 700 15 8
-					 b000 0 0 4 700 16 8
+					 b000 0 0 1 &ipic 17 8
+					 b000 0 0 2 &ipic 14 8
+					 b000 0 0 3 &ipic 15 8
+					 b000 0 0 4 &ipic 16 8
 
 					/* IDSEL 0x17 AD23*/
-					 b800 0 0 1 700 16 8
-					 b800 0 0 2 700 17 8
-					 b800 0 0 3 700 14 8
-					 b800 0 0 4 700 15 8
+					 b800 0 0 1 &ipic 16 8
+					 b800 0 0 2 &ipic 17 8
+					 b800 0 0 3 &ipic 14 8
+					 b800 0 0 4 &ipic 15 8
 
 					/* IDSEL 0x18 AD24*/
-					 c000 0 0 1 700 15 8
-					 c000 0 0 2 700 16 8
-					 c000 0 0 3 700 17 8
-					 c000 0 0 4 700 14 8>;
-			interrupt-parent = <700>;
+					 c000 0 0 1 &ipic 15 8
+					 c000 0 0 2 &ipic 16 8
+					 c000 0 0 3 &ipic 17 8
+					 c000 0 0 4 &ipic 14 8>;
+			interrupt-parent = < &ipic >;
 			interrupts = <42 8>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 a0000000 a0000000 0 10000000
@@ -180,8 +173,7 @@
 			device_type = "pci";
 		};
 
-		pic@700 {
-			linux,phandle = <700>;
+		ipic: pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
@@ -195,8 +187,7 @@
 			device_type = "par_io";
 			num-ports = <7>;
 
-			ucc_pin@01 {
-				linux,phandle = <140001>;
+			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0  3  1  0  1  0 	/* TxD0 */
@@ -223,8 +214,7 @@
 					2  9  1  0  3  0 	/* GTX_CLK - CLK10 */
 					2  8  2  0  1  0>;	/* GTX125 - CLK9 */
 			};
-			ucc_pin@02 {
-				linux,phandle = <140002>;
+			pio2: ucc_pin@02 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					0  11 1  0  1  0   /* TxD0 */
@@ -281,7 +271,7 @@
 			compatible = "fsl_spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mode = "cpu";
 		};
 
@@ -290,7 +280,7 @@
 			compatible = "fsl_spi";
 			reg = <500 40>;
 			interrupts = <1>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mode = "cpu";
 		};
 
@@ -299,7 +289,7 @@
 			compatible = "qe_udc";
 			reg = <6c0 40 8B00 100>;
 			interrupts = <b>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mode = "slave";
 		};
 
@@ -310,12 +300,12 @@
 			device-id = <1>;
 			reg = <2000 200>;
 			interrupts = <20>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mac-address = [ 00 04 9f 00 23 23 ];
 			rx-clock = <0>;
 			tx-clock = <19>;
-			phy-handle = <212000>;
-			pio-handle = <140001>;
+			phy-handle = < &phy0 >;
+			pio-handle = < &pio1 >;
 		};
 
 		ucc@3000 {
@@ -325,12 +315,12 @@
 			device-id = <2>;
 			reg = <3000 200>;
 			interrupts = <21>;
-			interrupt-parent = <80>;
+			interrupt-parent = < &qeic >;
 			mac-address = [ 00 11 22 33 44 55 ];
 			rx-clock = <0>;
 			tx-clock = <14>;
-			phy-handle = <212001>;
-			pio-handle = <140002>;
+			phy-handle = < &phy1 >;
+			pio-handle = < &pio2 >;
 		};
 
 		mdio@2120 {
@@ -340,26 +330,23 @@
 			device_type = "mdio";
 			compatible = "ucc_geth_phy";
 
-			ethernet-phy@00 {
-				linux,phandle = <212000>;
-				interrupt-parent = <700>;
-				interrupts = <11 2>;
+			phy0: ethernet-phy@00 {
+				interrupt-parent = < &ipic >;
+				interrupts = <11 8>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 				interface = <6>; //ENET_1000_GMII
 			};
-			ethernet-phy@01 {
-				linux,phandle = <212001>;
-				interrupt-parent = <700>;
-				interrupts = <12 2>;
+			phy1: ethernet-phy@01 {
+				interrupt-parent = < &ipic >;
+				interrupts = <12 8>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 				interface = <6>;
 			};
 		};
 
-		qeic@80 {
-			linux,phandle = <80>;
+		qeic: qeic@80 {
 			interrupt-controller;
 			device_type = "qeic";
 			#address-cells = <0>;
@@ -368,7 +355,7 @@
 			built-in;
 			big-endian;
 			interrupts = <20 8 21 8>; //high:32 low:33
-			interrupt-parent = <700>;
+			interrupt-parent = < &ipic >;
 		};
 
 	};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 5f41c1f7a5f3..f261d647ac85 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -12,16 +12,13 @@
 
 / {
 	model = "MPC8540ADS";
-	compatible = "MPC85xxADS";
+	compatible = "MPC8540ADS", "MPC85xxADS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8540@0 {
 			device_type = "cpu";
@@ -34,13 +31,11 @@
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
 			32-bit;
-			linux,phandle = <201>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 08000000>;	// 128M at 0x0
 	};
 
@@ -58,7 +53,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <1b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -68,24 +63,20 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@3 {
-				linux,phandle = <2452003>;
-				interrupt-parent = <40000>;
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
 				interrupts = <37 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
@@ -102,8 +93,8 @@
 			address = [ 00 E0 0C 00 73 00 ];
 			local-mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 2 e 2 12 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
 		};
 
 		ethernet@25000 {
@@ -116,8 +107,8 @@
 			address = [ 00 E0 0C 00 73 01 ];
 			local-mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 2 14 2 18 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
 		};
 
 		ethernet@26000 {
@@ -130,8 +121,8 @@
 			address = [ 00 E0 0C 00 73 02 ];
 			local-mac-address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <19 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452003>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
 		};
 
 		serial@4500 {
@@ -140,7 +131,7 @@
 			reg = <4500 100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		serial@4600 {
@@ -149,85 +140,84 @@
 			reg = <4600 100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 		pci@8000 {
-			linux,phandle = <8000>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x02 */
-				1000 0 0 1 40000 31 1
-				1000 0 0 2 40000 32 1
-				1000 0 0 3 40000 33 1
-				1000 0 0 4 40000 34 1
+				1000 0 0 1 &mpic 31 1
+				1000 0 0 2 &mpic 32 1
+				1000 0 0 3 &mpic 33 1
+				1000 0 0 4 &mpic 34 1
 
 				/* IDSEL 0x03 */
-				1800 0 0 1 40000 34 1
-				1800 0 0 2 40000 31 1
-				1800 0 0 3 40000 32 1
-				1800 0 0 4 40000 33 1
+				1800 0 0 1 &mpic 34 1
+				1800 0 0 2 &mpic 31 1
+				1800 0 0 3 &mpic 32 1
+				1800 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x04 */
-				2000 0 0 1 40000 33 1
-				2000 0 0 2 40000 34 1
-				2000 0 0 3 40000 31 1
-				2000 0 0 4 40000 32 1
+				2000 0 0 1 &mpic 33 1
+				2000 0 0 2 &mpic 34 1
+				2000 0 0 3 &mpic 31 1
+				2000 0 0 4 &mpic 32 1
 
 				/* IDSEL 0x05 */
-				2800 0 0 1 40000 32 1
-				2800 0 0 2 40000 33 1
-				2800 0 0 3 40000 34 1
-				2800 0 0 4 40000 31 1
+				2800 0 0 1 &mpic 32 1
+				2800 0 0 2 &mpic 33 1
+				2800 0 0 3 &mpic 34 1
+				2800 0 0 4 &mpic 31 1
 
 				/* IDSEL 0x0c */
-				6000 0 0 1 40000 31 1
-				6000 0 0 2 40000 32 1
-				6000 0 0 3 40000 33 1
-				6000 0 0 4 40000 34 1
+				6000 0 0 1 &mpic 31 1
+				6000 0 0 2 &mpic 32 1
+				6000 0 0 3 &mpic 33 1
+				6000 0 0 4 &mpic 34 1
 
 				/* IDSEL 0x0d */
-				6800 0 0 1 40000 34 1
-				6800 0 0 2 40000 31 1
-				6800 0 0 3 40000 32 1
-				6800 0 0 4 40000 33 1
+				6800 0 0 1 &mpic 34 1
+				6800 0 0 2 &mpic 31 1
+				6800 0 0 3 &mpic 32 1
+				6800 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x0e */
-				7000 0 0 1 40000 33 1
-				7000 0 0 2 40000 34 1
-				7000 0 0 3 40000 31 1
-				7000 0 0 4 40000 32 1
+				7000 0 0 1 &mpic 33 1
+				7000 0 0 2 &mpic 34 1
+				7000 0 0 3 &mpic 31 1
+				7000 0 0 4 &mpic 32 1
 
 				/* IDSEL 0x0f */
-				7800 0 0 1 40000 32 1
-				7800 0 0 2 40000 33 1
-				7800 0 0 3 40000 34 1
-				7800 0 0 4 40000 31 1
+				7800 0 0 1 &mpic 32 1
+				7800 0 0 2 &mpic 33 1
+				7800 0 0 3 &mpic 34 1
+				7800 0 0 4 &mpic 31 1
 
 				/* IDSEL 0x12 */
-				9000 0 0 1 40000 31 1
-				9000 0 0 2 40000 32 1
-				9000 0 0 3 40000 33 1
-				9000 0 0 4 40000 34 1
+				9000 0 0 1 &mpic 31 1
+				9000 0 0 2 &mpic 32 1
+				9000 0 0 3 &mpic 33 1
+				9000 0 0 4 &mpic 34 1
 
 				/* IDSEL 0x13 */
-				9800 0 0 1 40000 34 1
-				9800 0 0 2 40000 31 1
-				9800 0 0 3 40000 32 1
-				9800 0 0 4 40000 33 1
+				9800 0 0 1 &mpic 34 1
+				9800 0 0 2 &mpic 31 1
+				9800 0 0 3 &mpic 32 1
+				9800 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x14 */
-				a000 0 0 1 40000 33 1
-				a000 0 0 2 40000 34 1
-				a000 0 0 3 40000 31 1
-				a000 0 0 4 40000 32 1
+				a000 0 0 1 &mpic 33 1
+				a000 0 0 2 &mpic 34 1
+				a000 0 0 3 &mpic 31 1
+				a000 0 0 4 &mpic 32 1
 
 				/* IDSEL 0x15 */
-				a800 0 0 1 40000 32 1
-				a800 0 0 2 40000 33 1
-				a800 0 0 3 40000 34 1
-				a800 0 0 4 40000 31 1>;
-			interrupt-parent = <40000>;
+				a800 0 0 1 &mpic 32 1
+				a800 0 0 2 &mpic 33 1
+				a800 0 0 3 &mpic 34 1
+				a800 0 0 4 &mpic 31 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <08 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
@@ -241,8 +231,7 @@
 			device_type = "pci";
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 7be0bc659e1c..5fdcb69554f2 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -12,16 +12,13 @@
 
 / {
 	model = "MPC8541CDS";
-	compatible = "MPC85xxCDS";
+	compatible = "MPC8541CDS", "MPC85xxCDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8541@0 {
 			device_type = "cpu";
@@ -34,13 +31,11 @@
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
 			32-bit;
-			linux,phandle = <201>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 08000000>;	// 128M at 0x0
 	};
 
@@ -58,7 +53,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <1b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -68,17 +63,14 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <1>;
 				device_type = "ethernet-phy";
@@ -94,8 +86,8 @@
 			reg = <24000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 2 e 2 12 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
 		};
 
 		ethernet@25000 {
@@ -107,8 +99,8 @@
 			reg = <25000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 2 14 2 18 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
 		};
 
 		serial@4500 {
@@ -117,7 +109,7 @@
 			reg = <4500 100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		serial@4600 {
@@ -126,57 +118,56 @@
 			reg = <4600 100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
-		pci@8000 {
-			linux,phandle = <8000>;
+		pci1: pci@8000 {
 			interrupt-map-mask = <1f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x10 */
-				08000 0 0 1 40000 30 1
-				08000 0 0 2 40000 31 1
-				08000 0 0 3 40000 32 1
-				08000 0 0 4 40000 33 1
+				08000 0 0 1 &mpic 30 1
+				08000 0 0 2 &mpic 31 1
+				08000 0 0 3 &mpic 32 1
+				08000 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x11 */
-				08800 0 0 1 40000 30 1
-				08800 0 0 2 40000 31 1
-				08800 0 0 3 40000 32 1
-				08800 0 0 4 40000 33 1
+				08800 0 0 1 &mpic 30 1
+				08800 0 0 2 &mpic 31 1
+				08800 0 0 3 &mpic 32 1
+				08800 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x12 (Slot 1) */
-				09000 0 0 1 40000 30 1
-				09000 0 0 2 40000 31 1
-				09000 0 0 3 40000 32 1
-				09000 0 0 4 40000 33 1
+				09000 0 0 1 &mpic 30 1
+				09000 0 0 2 &mpic 31 1
+				09000 0 0 3 &mpic 32 1
+				09000 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x13 (Slot 2) */
-				09800 0 0 1 40000 31 1
-				09800 0 0 2 40000 32 1
-				09800 0 0 3 40000 33 1
-				09800 0 0 4 40000 30 1
+				09800 0 0 1 &mpic 31 1
+				09800 0 0 2 &mpic 32 1
+				09800 0 0 3 &mpic 33 1
+				09800 0 0 4 &mpic 30 1
 
 				/* IDSEL 0x14 (Slot 3) */
-				0a000 0 0 1 40000 32 1
-				0a000 0 0 2 40000 33 1
-				0a000 0 0 3 40000 30 1
-				0a000 0 0 4 40000 31 1
+				0a000 0 0 1 &mpic 32 1
+				0a000 0 0 2 &mpic 33 1
+				0a000 0 0 3 &mpic 30 1
+				0a000 0 0 4 &mpic 31 1
 
 				/* IDSEL 0x15 (Slot 4) */
-				0a800 0 0 1 40000 33 1
-				0a800 0 0 2 40000 30 1
-				0a800 0 0 3 40000 31 1
-				0a800 0 0 4 40000 32 1
+				0a800 0 0 1 &mpic 33 1
+				0a800 0 0 2 &mpic 30 1
+				0a800 0 0 3 &mpic 31 1
+				0a800 0 0 4 &mpic 32 1
 
 				/* Bus 1 (Tundra Bridge) */
 				/* IDSEL 0x12 (ISA bridge) */
-				19000 0 0 1 40000 30 1
-				19000 0 0 2 40000 31 1
-				19000 0 0 3 40000 32 1
-				19000 0 0 4 40000 33 1>;
-			interrupt-parent = <40000>;
+				19000 0 0 1 &mpic 30 1
+				19000 0 0 2 &mpic 31 1
+				19000 0 0 3 &mpic 32 1
+				19000 0 0 4 &mpic 33 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <08 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
@@ -200,21 +191,20 @@
 				compatible = "chrp,iic";
 				big-endian;
 				interrupts = <1>;
-				interrupt-parent = <8000>;
+				interrupt-parent = <&pci1>;
 			};
 		};
 
 		pci@9000 {
-			linux,phandle = <9000>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x15 */
-				a800 0 0 1 40000 3b 1
-				a800 0 0 2 40000 3b 1
-				a800 0 0 3 40000 3b 1
-				a800 0 0 4 40000 3b 1>;
-			interrupt-parent = <40000>;
+				a800 0 0 1 &mpic 3b 1
+				a800 0 0 2 &mpic 3b 1
+				a800 0 0 3 &mpic 3b 1
+				a800 0 0 4 &mpic 3b 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <09 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 a0000000 a0000000 0 20000000
@@ -228,8 +218,7 @@
 			device_type = "pci";
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
new file mode 100644
index 000000000000..6b084605bb4b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -0,0 +1,136 @@
+/*
+ * MPC8544 DS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8544DS";
+	compatible = "MPC8544DS", "MPC85xxDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 00000000>;	// Filled by U-Boot
+	};
+
+	soc8544@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3a 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3a 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+		};
+
+		ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <26000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <f 2 10 2 11 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <1a 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <1a 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 893d7957c174..b2b2200d0425 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -12,16 +12,13 @@
 
 / {
 	model = "MPC8548CDS";
-	compatible = "MPC85xxCDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8548@0 {
 			device_type = "cpu";
@@ -34,13 +31,11 @@
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
 			32-bit;
-			linux,phandle = <201>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 08000000>;	// 128M at 0x0
 	};
 
@@ -58,7 +53,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <1b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -68,32 +63,26 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-
-			ethernet-phy@2 {
-				linux,phandle = <2452002>;
-				interrupt-parent = <40000>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@3 {
-				linux,phandle = <2452003>;
-				interrupt-parent = <40000>;
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <3>;
 				device_type = "ethernet-phy";
@@ -109,8 +98,8 @@
 			reg = <24000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <d 2 e 2 12 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
 		};
 
 		ethernet@25000 {
@@ -122,10 +111,11 @@
 			reg = <25000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 2 14 2 18 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
 		};
 
+/* eTSEC 3/4 are currently broken
 		ethernet@26000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -135,11 +125,10 @@
 			reg = <26000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 02 ];
 			interrupts = <f 2 10 2 11 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
 		};
 
-/* eTSEC 4 is currently broken
 		ethernet@27000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -149,8 +138,8 @@
 			reg = <27000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 03 ];
 			interrupts = <15 2 16 2 17 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
 		};
  */
 
@@ -160,7 +149,7 @@
 			reg = <4500 100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		serial@4600 {
@@ -169,57 +158,56 @@
 			reg = <4600 100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
-		pci@8000 {
-			linux,phandle = <8000>;
+		pci1: pci@8000 {
 			interrupt-map-mask = <1f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x10 */
-				08000 0 0 1 40000 30 1
-				08000 0 0 2 40000 31 1
-				08000 0 0 3 40000 32 1
-				08000 0 0 4 40000 33 1
+				08000 0 0 1 &mpic 30 1
+				08000 0 0 2 &mpic 31 1
+				08000 0 0 3 &mpic 32 1
+				08000 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x11 */
-				08800 0 0 1 40000 30 1
-				08800 0 0 2 40000 31 1
-				08800 0 0 3 40000 32 1
-				08800 0 0 4 40000 33 1
+				08800 0 0 1 &mpic 30 1
+				08800 0 0 2 &mpic 31 1
+				08800 0 0 3 &mpic 32 1
+				08800 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x12 (Slot 1) */
-				09000 0 0 1 40000 30 1
-				09000 0 0 2 40000 31 1
-				09000 0 0 3 40000 32 1
-				09000 0 0 4 40000 33 1
+				09000 0 0 1 &mpic 30 1
+				09000 0 0 2 &mpic 31 1
+				09000 0 0 3 &mpic 32 1
+				09000 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x13 (Slot 2) */
-				09800 0 0 1 40000 31 1
-				09800 0 0 2 40000 32 1
-				09800 0 0 3 40000 33 1
-				09800 0 0 4 40000 30 1
+				09800 0 0 1 &mpic 31 1
+				09800 0 0 2 &mpic 32 1
+				09800 0 0 3 &mpic 33 1
+				09800 0 0 4 &mpic 30 1
 
 				/* IDSEL 0x14 (Slot 3) */
-				0a000 0 0 1 40000 32 1
-				0a000 0 0 2 40000 33 1
-				0a000 0 0 3 40000 30 1
-				0a000 0 0 4 40000 31 1
+				0a000 0 0 1 &mpic 32 1
+				0a000 0 0 2 &mpic 33 1
+				0a000 0 0 3 &mpic 30 1
+				0a000 0 0 4 &mpic 31 1
 
 				/* IDSEL 0x15 (Slot 4) */
-				0a800 0 0 1 40000 33 1
-				0a800 0 0 2 40000 30 1
-				0a800 0 0 3 40000 31 1
-				0a800 0 0 4 40000 32 1
+				0a800 0 0 1 &mpic 33 1
+				0a800 0 0 2 &mpic 30 1
+				0a800 0 0 3 &mpic 31 1
+				0a800 0 0 4 &mpic 32 1
 
 				/* Bus 1 (Tundra Bridge) */
 				/* IDSEL 0x12 (ISA bridge) */
-				19000 0 0 1 40000 30 1
-				19000 0 0 2 40000 31 1
-				19000 0 0 3 40000 32 1
-				19000 0 0 4 40000 33 1>;
-			interrupt-parent = <40000>;
+				19000 0 0 1 &mpic 30 1
+				19000 0 0 2 &mpic 31 1
+				19000 0 0 3 &mpic 32 1
+				19000 0 0 4 &mpic 33 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <08 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
@@ -243,21 +231,20 @@
 				compatible = "chrp,iic";
 				big-endian;
 				interrupts = <1>;
-				interrupt-parent = <8000>;
+				interrupt-parent = <&pci1>;
 			};
 		};
 
 		pci@9000 {
-			linux,phandle = <9000>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x15 */
-				a800 0 0 1 40000 3b 1
-				a800 0 0 2 40000 3b 1
-				a800 0 0 3 40000 3b 1
-				a800 0 0 4 40000 3b 1>;
-			interrupt-parent = <40000>;
+				a800 0 0 1 &mpic 3b 1
+				a800 0 0 2 &mpic 3b 1
+				a800 0 0 3 &mpic 3b 1
+				a800 0 0 4 &mpic 3b 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <09 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 a0000000 a0000000 0 20000000
@@ -271,8 +258,7 @@
 			device_type = "pci";
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 118f5a887651..68a4795720dc 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -12,16 +12,13 @@
 
 / {
 	model = "MPC8555CDS";
-	compatible = "MPC85xxCDS";
+	compatible = "MPC8555CDS", "MPC85xxCDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8555@0 {
 			device_type = "cpu";
@@ -34,13 +31,11 @@
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
 			32-bit;
-			linux,phandle = <201>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 08000000>;	// 128M at 0x0
 	};
 
@@ -58,7 +53,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <1b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -68,17 +63,14 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 0>;
 				reg = <1>;
 				device_type = "ethernet-phy";
@@ -94,8 +86,8 @@
 			reg = <24000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <0d 2 0e 2 12 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
 		};
 
 		ethernet@25000 {
@@ -107,8 +99,8 @@
 			reg = <25000 1000>;
 			local-mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <13 2 14 2 18 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
 		};
 
 		serial@4500 {
@@ -117,7 +109,7 @@
 			reg = <4500 100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		serial@4600 {
@@ -126,57 +118,56 @@
 			reg = <4600 100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
-		pci@8000 {
-			linux,phandle = <8000>;
+		pci1: pci@8000 {
 			interrupt-map-mask = <1f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x10 */
-				08000 0 0 1 40000 30 1
-				08000 0 0 2 40000 31 1
-				08000 0 0 3 40000 32 1
-				08000 0 0 4 40000 33 1
+				08000 0 0 1 &mpic 30 1
+				08000 0 0 2 &mpic 31 1
+				08000 0 0 3 &mpic 32 1
+				08000 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x11 */
-				08800 0 0 1 40000 30 1
-				08800 0 0 2 40000 31 1
-				08800 0 0 3 40000 32 1
-				08800 0 0 4 40000 33 1
+				08800 0 0 1 &mpic 30 1
+				08800 0 0 2 &mpic 31 1
+				08800 0 0 3 &mpic 32 1
+				08800 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x12 (Slot 1) */
-				09000 0 0 1 40000 30 1
-				09000 0 0 2 40000 31 1
-				09000 0 0 3 40000 32 1
-				09000 0 0 4 40000 33 1
+				09000 0 0 1 &mpic 30 1
+				09000 0 0 2 &mpic 31 1
+				09000 0 0 3 &mpic 32 1
+				09000 0 0 4 &mpic 33 1
 
 				/* IDSEL 0x13 (Slot 2) */
-				09800 0 0 1 40000 31 1
-				09800 0 0 2 40000 32 1
-				09800 0 0 3 40000 33 1
-				09800 0 0 4 40000 30 1
+				09800 0 0 1 &mpic 31 1
+				09800 0 0 2 &mpic 32 1
+				09800 0 0 3 &mpic 33 1
+				09800 0 0 4 &mpic 30 1
 
 				/* IDSEL 0x14 (Slot 3) */
-				0a000 0 0 1 40000 32 1
-				0a000 0 0 2 40000 33 1
-				0a000 0 0 3 40000 30 1
-				0a000 0 0 4 40000 31 1
+				0a000 0 0 1 &mpic 32 1
+				0a000 0 0 2 &mpic 33 1
+				0a000 0 0 3 &mpic 30 1
+				0a000 0 0 4 &mpic 31 1
 
 				/* IDSEL 0x15 (Slot 4) */
-				0a800 0 0 1 40000 33 1
-				0a800 0 0 2 40000 30 1
-				0a800 0 0 3 40000 31 1
-				0a800 0 0 4 40000 32 1
+				0a800 0 0 1 &mpic 33 1
+				0a800 0 0 2 &mpic 30 1
+				0a800 0 0 3 &mpic 31 1
+				0a800 0 0 4 &mpic 32 1
 
 				/* Bus 1 (Tundra Bridge) */
 				/* IDSEL 0x12 (ISA bridge) */
-				19000 0 0 1 40000 30 1
-				19000 0 0 2 40000 31 1
-				19000 0 0 3 40000 32 1
-				19000 0 0 4 40000 33 1>;
-			interrupt-parent = <40000>;
+				19000 0 0 1 &mpic 30 1
+				19000 0 0 2 &mpic 31 1
+				19000 0 0 3 &mpic 32 1
+				19000 0 0 4 &mpic 33 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <08 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
@@ -200,21 +191,20 @@
 				compatible = "chrp,iic";
 				big-endian;
 				interrupts = <1>;
-				interrupt-parent = <8000>;
+				interrupt-parent = <&pci1>;
 			};
 		};
 
 		pci@9000 {
-			linux,phandle = <9000>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 
 				/* IDSEL 0x15 */
-				a800 0 0 1 40000 3b 1
-				a800 0 0 2 40000 3b 1
-				a800 0 0 3 40000 3b 1
-				a800 0 0 4 40000 3b 1>;
-			interrupt-parent = <40000>;
+				a800 0 0 1 &mpic 3b 1
+				a800 0 0 2 &mpic 3b 1
+				a800 0 0 3 &mpic 3b 1
+				a800 0 0 4 &mpic 3b 1>;
+			interrupt-parent = <&mpic>;
 			interrupts = <09 2>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 a0000000 a0000000 0 20000000
@@ -228,8 +218,7 @@
 			device_type = "pci";
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 119bd5d3a834..1f2afe9291d2 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -12,16 +12,13 @@
 
 / {
 	model = "MPC8560ADS";
-	compatible = "MPC85xxADS";
+	compatible = "MPC8560ADS", "MPC85xxADS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8560@0 {
 			device_type = "cpu";
@@ -34,14 +31,11 @@
 			bus-frequency = <13ab6680>;
 			clock-frequency = <312c8040>;
 			32-bit;
-			linux,phandle = <201>;
-			linux,boot-cpu;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 10000000>;
 	};
 
@@ -58,33 +52,28 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <35 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@2 {
-				linux,phandle = <2452002>;
-				interrupt-parent = <40000>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
 				interrupts = <37 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@3 {
-				linux,phandle = <2452003>;
-				interrupt-parent = <40000>;
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
 				interrupts = <37 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
@@ -98,8 +87,8 @@
 			reg = <24000 1000>;
 			address = [ 00 00 0C 00 00 FD ];
 			interrupts = <d 2 e 2 12 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
 		};
 
 		ethernet@25000 {
@@ -111,12 +100,11 @@
 			reg = <25000 1000>;
 			address = [ 00 00 0C 00 01 FD ];
 			interrupts = <13 2 14 2 18 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
 		};
 
 		pci@8000 {
-			linux,phandle = <8000>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -128,96 +116,94 @@
 			interrupt-map = <
 
 					/* IDSEL 0x2 */
-					 1000 0 0 1 40000 31 1
-					 1000 0 0 2 40000 32 1
-					 1000 0 0 3 40000 33 1
-					 1000 0 0 4 40000 34 1
+					 1000 0 0 1 &mpic 31 1
+					 1000 0 0 2 &mpic 32 1
+					 1000 0 0 3 &mpic 33 1
+					 1000 0 0 4 &mpic 34 1
 
 					/* IDSEL 0x3 */
-					 1800 0 0 1 40000 34 1
-					 1800 0 0 2 40000 31 1
-					 1800 0 0 3 40000 32 1
-					 1800 0 0 4 40000 33 1
+					 1800 0 0 1 &mpic 34 1
+					 1800 0 0 2 &mpic 31 1
+					 1800 0 0 3 &mpic 32 1
+					 1800 0 0 4 &mpic 33 1
 
 					/* IDSEL 0x4 */
-					 2000 0 0 1 40000 33 1
-					 2000 0 0 2 40000 34 1
-					 2000 0 0 3 40000 31 1
-					 2000 0 0 4 40000 32 1
+					 2000 0 0 1 &mpic 33 1
+					 2000 0 0 2 &mpic 34 1
+					 2000 0 0 3 &mpic 31 1
+					 2000 0 0 4 &mpic 32 1
 
 					/* IDSEL 0x5  */
-					 2800 0 0 1 40000 32 1
-					 2800 0 0 2 40000 33 1
-					 2800 0 0 3 40000 34 1
-					 2800 0 0 4 40000 31 1
+					 2800 0 0 1 &mpic 32 1
+					 2800 0 0 2 &mpic 33 1
+					 2800 0 0 3 &mpic 34 1
+					 2800 0 0 4 &mpic 31 1
 
 					/* IDSEL 12 */
-					 6000 0 0 1 40000 31 1
-					 6000 0 0 2 40000 32 1
-					 6000 0 0 3 40000 33 1
-					 6000 0 0 4 40000 34 1
+					 6000 0 0 1 &mpic 31 1
+					 6000 0 0 2 &mpic 32 1
+					 6000 0 0 3 &mpic 33 1
+					 6000 0 0 4 &mpic 34 1
 
 					/* IDSEL 13 */
-					 6800 0 0 1 40000 34 1
-					 6800 0 0 2 40000 31 1
-					 6800 0 0 3 40000 32 1
-					 6800 0 0 4 40000 33 1
+					 6800 0 0 1 &mpic 34 1
+					 6800 0 0 2 &mpic 31 1
+					 6800 0 0 3 &mpic 32 1
+					 6800 0 0 4 &mpic 33 1
 
 					/* IDSEL 14*/
-					 7000 0 0 1 40000 33 1
-					 7000 0 0 2 40000 34 1
-					 7000 0 0 3 40000 31 1
-					 7000 0 0 4 40000 32 1
+					 7000 0 0 1 &mpic 33 1
+					 7000 0 0 2 &mpic 34 1
+					 7000 0 0 3 &mpic 31 1
+					 7000 0 0 4 &mpic 32 1
 
 					/* IDSEL 15 */
-					 7800 0 0 1 40000 32 1
-					 7800 0 0 2 40000 33 1
-					 7800 0 0 3 40000 34 1
-					 7800 0 0 4 40000 31 1
+					 7800 0 0 1 &mpic 32 1
+					 7800 0 0 2 &mpic 33 1
+					 7800 0 0 3 &mpic 34 1
+					 7800 0 0 4 &mpic 31 1
 
 					/* IDSEL 18 */
-					 9000 0 0 1 40000 31 1
-					 9000 0 0 2 40000 32 1
-					 9000 0 0 3 40000 33 1
-					 9000 0 0 4 40000 34 1
+					 9000 0 0 1 &mpic 31 1
+					 9000 0 0 2 &mpic 32 1
+					 9000 0 0 3 &mpic 33 1
+					 9000 0 0 4 &mpic 34 1
 
 					/* IDSEL 19 */
-					 9800 0 0 1 40000 34 1
-					 9800 0 0 2 40000 31 1
-					 9800 0 0 3 40000 32 1
-					 9800 0 0 4 40000 33 1
+					 9800 0 0 1 &mpic 34 1
+					 9800 0 0 2 &mpic 31 1
+					 9800 0 0 3 &mpic 32 1
+					 9800 0 0 4 &mpic 33 1
 
 					/* IDSEL 20 */
-					 a000 0 0 1 40000 33 1
-					 a000 0 0 2 40000 34 1
-					 a000 0 0 3 40000 31 1
-					 a000 0 0 4 40000 32 1
+					 a000 0 0 1 &mpic 33 1
+					 a000 0 0 2 &mpic 34 1
+					 a000 0 0 3 &mpic 31 1
+					 a000 0 0 4 &mpic 32 1
 
 					/* IDSEL 21 */
-					 a800 0 0 1 40000 32 1
-					 a800 0 0 2 40000 33 1
-					 a800 0 0 3 40000 34 1
-					 a800 0 0 4 40000 31 1>;
+					 a800 0 0 1 &mpic 32 1
+					 a800 0 0 2 &mpic 33 1
+					 a800 0 0 3 &mpic 34 1
+					 a800 0 0 4 &mpic 31 1>;
 
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			interrupts = <8 0>;
 			bus-range = <0 0>;
 			ranges = <02000000 0 80000000 80000000 0 20000000
 				  01000000 0 00000000 e2000000 0 01000000>;
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 20100>;
+			reg = <40000 40000>;
 			built-in;
 			device_type = "open-pic";
 		};
 
 		cpm@e0000000 {
-			linux,phandle = <e0000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <2>;
@@ -228,13 +214,12 @@
 			command-proc = <919c0>;
 			brg-frequency = <9d5b340>;
 
-			pic@90c00 {
-				linux,phandle = <90c00>;
+			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				interrupts = <1e 0>;
-				interrupt-parent = <40000>;
+				interrupt-parent = <&mpic>;
 				reg = <90c00 80>;
 				built-in;
 				device_type = "cpm-pic";
@@ -251,7 +236,7 @@
 				tx-clock = <1>;
 				current-speed = <1c200>;
 				interrupts = <28 8>;
-				interrupt-parent = <90c00>;
+				interrupt-parent = <&cpmpic>;
 			};
 
 			scc@91a20 {
@@ -265,7 +250,7 @@
 				tx-clock = <2>;
 				current-speed = <1c200>;
 				interrupts = <29 8>;
-				interrupt-parent = <90c00>;
+				interrupt-parent = <&cpmpic>;
 			};
 
 			fcc@91320 {
@@ -279,8 +264,8 @@
 				rx-clock = <15>;
 				tx-clock = <16>;
 				interrupts = <21 8>;
-				interrupt-parent = <90c00>;
-				phy-handle = <2452002>;
+				interrupt-parent = <&cpmpic>;
+				phy-handle = <&phy2>;
 			};
 
 			fcc@91340 {
@@ -294,8 +279,8 @@
 				rx-clock = <17>;
 				tx-clock = <18>;
 				interrupts = <22 8>;
-				interrupt-parent = <90c00>;
-				phy-handle = <2452003>;
+				interrupt-parent = <&cpmpic>;
+				phy-handle = <&phy3>;
 			};
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 06d24653e422..7361b36749cb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -16,16 +16,13 @@
 
 / {
 	model = "MPC8568EMDS";
-	compatible = "MPC85xxMDS";
+	compatible = "MPC8568EMDS", "MPC85xxMDS";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		linux,phandle = <200>;
 
 		PowerPC,8568@0 {
 			device_type = "cpu";
@@ -38,13 +35,11 @@
 			bus-frequency = <0>;
 			clock-frequency = <0>;
 			32-bit;
-			linux,phandle = <201>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		linux,phandle = <300>;
 		reg = <00000000 10000000>;
 	};
 
@@ -67,7 +62,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <1b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -76,7 +71,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <1b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -86,32 +81,26 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-
-			ethernet-phy@2 {
-				linux,phandle = <2452002>;
-				interrupt-parent = <40000>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@3 {
-				linux,phandle = <2452003>;
-				interrupt-parent = <40000>;
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
@@ -127,8 +116,8 @@
 			reg = <24000 1000>;
 			mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <d 2 e 2 12 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452002>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
 		};
 
 		ethernet@25000 {
@@ -140,8 +129,8 @@
 			reg = <25000 1000>;
 			mac-address = [ 00 00 00 00 00 00];
 			interrupts = <13 2 14 2 18 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452003>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
 		};
 
 		serial@4500 {
@@ -150,7 +139,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		serial@4600 {
@@ -159,7 +148,7 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;
 			interrupts = <1a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		crypto@30000 {
@@ -168,15 +157,14 @@
 			compatible = "talitos";
 			reg = <30000 f000>;
 			interrupts = <1d 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			num-channels = <4>;
 			channel-fifo-len = <18>;
 			exec-units-mask = <000000fe>;
 			descriptor-types-mask = <012b0ebf>;
 		};
 
-		pic@40000 {
-			linux,phandle = <40000>;
+		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
@@ -192,8 +180,7 @@
 			device_type = "par_io";
 			num-ports = <7>;
 
-			ucc_pin@01 {
-				linux,phandle = <e010001>;
+			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					4  0a  1  0  2  0 	/* TxD0 */
@@ -220,8 +207,7 @@
 					4  13  1  0  2  0 	/* GTX_CLK */
 					1  1f  2  0  3  0>;	/* GTX125 */
 			};
-			ucc_pin@02 {
-				linux,phandle = <e010002>;
+			pio2: ucc_pin@02 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
 					5  0a 1  0  2  0   /* TxD0 */
@@ -277,7 +263,7 @@
 			compatible = "fsl_spi";
 			reg = <4c0 40>;
 			interrupts = <2>;
-			interrupt-parent = <80>;
+			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
@@ -286,7 +272,7 @@
 			compatible = "fsl_spi";
 			reg = <500 40>;
 			interrupts = <1>;
-			interrupt-parent = <80>;
+			interrupt-parent = <&qeic>;
 			mode = "cpu";
 		};
 
@@ -297,12 +283,12 @@
 			device-id = <1>;
 			reg = <2000 200>;
 			interrupts = <20>;
-			interrupt-parent = <80>;
+			interrupt-parent = <&qeic>;
 			mac-address = [ 00 04 9f 00 23 23 ];
 			rx-clock = <0>;
 			tx-clock = <19>;
-			phy-handle = <212000>;
-			pio-handle = <e010001>;
+			phy-handle = <&qe_phy0>;
+			pio-handle = <&pio1>;
 		};
 
 		ucc@3000 {
@@ -312,12 +298,12 @@
 			device-id = <2>;
 			reg = <3000 200>;
 			interrupts = <21>;
-			interrupt-parent = <80>;
+			interrupt-parent = <&qeic>;
 			mac-address = [ 00 11 22 33 44 55 ];
 			rx-clock = <0>;
 			tx-clock = <14>;
-			phy-handle = <212001>;
-			pio-handle = <e010002>;
+			phy-handle = <&qe_phy1>;
+			pio-handle = <&pio2>;
 		};
 
 		mdio@2120 {
@@ -329,33 +315,29 @@
 
 			/* These are the same PHYs as on
 			 * gianfar's MDIO bus */
-			ethernet-phy@00 {
-				linux,phandle = <212000>;
-				interrupt-parent = <40000>;
+			qe_phy0: ethernet-phy@00 {
+				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 				interface = <6>; //ENET_1000_GMII
 			};
-			ethernet-phy@01 {
-				linux,phandle = <212001>;
-				interrupt-parent = <40000>;
+			qe_phy1: ethernet-phy@01 {
+				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 				interface = <6>;
 			};
-			ethernet-phy@02 {
-				linux,phandle = <212002>;
-				interrupt-parent = <40000>;
+			qe_phy2: ethernet-phy@02 {
+				interrupt-parent = <&mpic>;
 				interrupts = <31 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 				interface = <6>; //ENET_1000_GMII
 			};
-			ethernet-phy@03 {
-				linux,phandle = <212003>;
-				interrupt-parent = <40000>;
+			qe_phy3: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
 				interrupts = <32 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
@@ -363,8 +345,7 @@
 			};
 		};
 
-		qeic@80 {
-			linux,phandle = <80>;
+		qeic: qeic@80 {
 			interrupt-controller;
 			device_type = "qeic";
 			#address-cells = <0>;
@@ -373,7 +354,7 @@
 			built-in;
 			big-endian;
 			interrupts = <1e 2 1e 2>; //high:30 low:30
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 	};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index f0c7731743ea..260b264c869e 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -17,7 +17,6 @@
 	#size-cells = <1>;
 
 	cpus {
-		#cpus = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -32,7 +31,6 @@
 			bus-frequency = <0>;		// From uboot
 			clock-frequency = <0>;		// From uboot
 			32-bit;
-			linux,boot-cpu;
 		};
 		PowerPC,8641@1 {
 			device_type = "cpu";
@@ -67,7 +65,7 @@
 			compatible = "fsl-i2c";
 			reg = <3000 100>;
 			interrupts = <2b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -76,7 +74,7 @@
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <2b 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
@@ -86,31 +84,26 @@
 			device_type = "mdio";
 			compatible = "gianfar";
 			reg = <24520 20>;
-			linux,phandle = <24520>;
-			ethernet-phy@0 {
-				linux,phandle = <2452000>;
-				interrupt-parent = <40000>;
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
 				interrupts = <4a 1>;
 				reg = <0>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@1 {
-				linux,phandle = <2452001>;
-				interrupt-parent = <40000>;
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
 				interrupts = <4a 1>;
 				reg = <1>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@2 {
-				linux,phandle = <2452002>;
-				interrupt-parent = <40000>;
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
 				interrupts = <4a 1>;
 				reg = <2>;
 				device_type = "ethernet-phy";
 			};
-			ethernet-phy@3 {
-				linux,phandle = <2452003>;
-				interrupt-parent = <40000>;
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
 				interrupts = <4a 1>;
 				reg = <3>;
 				device_type = "ethernet-phy";
@@ -126,8 +119,8 @@
 			reg = <24000 1000>;
 			mac-address = [ 00 E0 0C 00 73 00 ];
 			interrupts = <1d 2 1e 2 22 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452000>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
 		};
 
 		ethernet@25000 {
@@ -139,8 +132,8 @@
 			reg = <25000 1000>;
 			mac-address = [ 00 E0 0C 00 73 01 ];
 			interrupts = <23 2 24 2 28 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452001>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
 		};
 		
 		ethernet@26000 {
@@ -152,8 +145,8 @@
 			reg = <26000 1000>;
 			mac-address = [ 00 E0 0C 00 02 FD ];
 			interrupts = <1F 2 20 2 21 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452002>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
 		};
 
 		ethernet@27000 {
@@ -165,8 +158,8 @@
 			reg = <27000 1000>;
 			mac-address = [ 00 E0 0C 00 03 FD ];
 			interrupts = <25 2 26 2 27 2>;
-			interrupt-parent = <40000>;
-			phy-handle = <2452003>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
 		};
 		serial@4500 {
 			device_type = "serial";
@@ -174,7 +167,7 @@
 			reg = <4500 100>;
 			clock-frequency = <0>;
 			interrupts = <2a 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		serial@4600 {
@@ -183,7 +176,7 @@
 			reg = <4600 100>;
 			clock-frequency = <0>;
 			interrupts = <1c 2>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 		};
 
 		pci@8000 {
@@ -197,103 +190,102 @@
 			ranges = <02000000 0 80000000 80000000 0 20000000
 				  01000000 0 00000000 e2000000 0 00100000>;
 			clock-frequency = <1fca055>;
-			interrupt-parent = <40000>;
+			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x11 */
-				8800 0 0 1 4d0 3 2
-				8800 0 0 2 4d0 4 2
-				8800 0 0 3 4d0 5 2
-				8800 0 0 4 4d0 6 2
+				8800 0 0 1 &i8259 3 2
+				8800 0 0 2 &i8259 4 2
+				8800 0 0 3 &i8259 5 2
+				8800 0 0 4 &i8259 6 2
 
 				/* IDSEL 0x12 */
-				9000 0 0 1 4d0 4 2
-				9000 0 0 2 4d0 5 2
-				9000 0 0 3 4d0 6 2
-				9000 0 0 4 4d0 3 2
+				9000 0 0 1 &i8259 4 2
+				9000 0 0 2 &i8259 5 2
+				9000 0 0 3 &i8259 6 2
+				9000 0 0 4 &i8259 3 2
 
 				/* IDSEL 0x13 */
-				9800 0 0 1 4d0 0 0
-				9800 0 0 2 4d0 0 0
-				9800 0 0 3 4d0 0 0
-				9800 0 0 4 4d0 0 0
+				9800 0 0 1 &i8259 0 0
+				9800 0 0 2 &i8259 0 0
+				9800 0 0 3 &i8259 0 0
+				9800 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x14 */
-				a000 0 0 1 4d0 0 0
-				a000 0 0 2 4d0 0 0
-				a000 0 0 3 4d0 0 0
-				a000 0 0 4 4d0 0 0
+				a000 0 0 1 &i8259 0 0
+				a000 0 0 2 &i8259 0 0
+				a000 0 0 3 &i8259 0 0
+				a000 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x15 */
-				a800 0 0 1 4d0 0 0
-				a800 0 0 2 4d0 0 0
-				a800 0 0 3 4d0 0 0
-				a800 0 0 4 4d0 0 0
+				a800 0 0 1 &i8259 0 0
+				a800 0 0 2 &i8259 0 0
+				a800 0 0 3 &i8259 0 0
+				a800 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x16 */
-				b000 0 0 1 4d0 0 0
-				b000 0 0 2 4d0 0 0
-				b000 0 0 3 4d0 0 0
-				b000 0 0 4 4d0 0 0
+				b000 0 0 1 &i8259 0 0
+				b000 0 0 2 &i8259 0 0
+				b000 0 0 3 &i8259 0 0
+				b000 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x17 */
-				b800 0 0 1 4d0 0 0
-				b800 0 0 2 4d0 0 0
-				b800 0 0 3 4d0 0 0
-				b800 0 0 4 4d0 0 0
+				b800 0 0 1 &i8259 0 0
+				b800 0 0 2 &i8259 0 0
+				b800 0 0 3 &i8259 0 0
+				b800 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x18 */
-				c000 0 0 1 4d0 0 0
-				c000 0 0 2 4d0 0 0
-				c000 0 0 3 4d0 0 0
-				c000 0 0 4 4d0 0 0
+				c000 0 0 1 &i8259 0 0
+				c000 0 0 2 &i8259 0 0
+				c000 0 0 3 &i8259 0 0
+				c000 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x19 */
-				c800 0 0 1 4d0 0 0
-				c800 0 0 2 4d0 0 0
-				c800 0 0 3 4d0 0 0
-				c800 0 0 4 4d0 0 0
+				c800 0 0 1 &i8259 0 0
+				c800 0 0 2 &i8259 0 0
+				c800 0 0 3 &i8259 0 0
+				c800 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x1a */
-				d000 0 0 1 4d0 6 2
-				d000 0 0 2 4d0 3 2
-				d000 0 0 3 4d0 4 2
-				d000 0 0 4 4d0 5 2
+				d000 0 0 1 &i8259 6 2
+				d000 0 0 2 &i8259 3 2
+				d000 0 0 3 &i8259 4 2
+				d000 0 0 4 &i8259 5 2
 
 
 				/* IDSEL 0x1b */
-				d800 0 0 1 4d0 5 2
-				d800 0 0 2 4d0 0 0
-				d800 0 0 3 4d0 0 0
-				d800 0 0 4 4d0 0 0
+				d800 0 0 1 &i8259 5 2
+				d800 0 0 2 &i8259 0 0
+				d800 0 0 3 &i8259 0 0
+				d800 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x1c */
-				e000 0 0 1 4d0 9 2
-				e000 0 0 2 4d0 a 2
-				e000 0 0 3 4d0 c 2
-				e000 0 0 4 4d0 7 2
+				e000 0 0 1 &i8259 9 2
+				e000 0 0 2 &i8259 a 2
+				e000 0 0 3 &i8259 c 2
+				e000 0 0 4 &i8259 7 2
 
 				/* IDSEL 0x1d */
-				e800 0 0 1 4d0 9 2
-				e800 0 0 2 4d0 a 2
-				e800 0 0 3 4d0 b 2
-				e800 0 0 4 4d0 0 0
+				e800 0 0 1 &i8259 9 2
+				e800 0 0 2 &i8259 a 2
+				e800 0 0 3 &i8259 b 2
+				e800 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x1e */
-				f000 0 0 1 4d0 c 2
-				f000 0 0 2 4d0 0 0
-				f000 0 0 3 4d0 0 0
-				f000 0 0 4 4d0 0 0
+				f000 0 0 1 &i8259 c 2
+				f000 0 0 2 &i8259 0 0
+				f000 0 0 3 &i8259 0 0
+				f000 0 0 4 &i8259 0 0
 
 				/* IDSEL 0x1f */
-				f800 0 0 1 4d0 6 2
-				f800 0 0 2 4d0 0 0
-				f800 0 0 3 4d0 0 0
-				f800 0 0 4 4d0 0 0
+				f800 0 0 1 &i8259 6 2
+				f800 0 0 2 &i8259 0 0
+				f800 0 0 3 &i8259 0 0
+				f800 0 0 4 &i8259 0 0
 				>;
-			i8259@4d0 {
-				linux,phandle = <4d0>;
+			i8259: i8259@4d0 {
 				clock-frequency = <0>;
 				interrupt-controller;
 				device_type = "interrupt-controller";
@@ -303,12 +295,35 @@
 				compatible = "chrp,iic";
                 	        big-endian;
 				interrupts = <49 2>;
-				interrupt-parent = <40000>;
+				interrupt-parent = <&mpic>;
 			};
 
 		};
-		pic@40000 {
-			linux,phandle = <40000>;
+
+		pci@9000 {
+			compatible = "86xx";
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <9000 1000>;
+			bus-range = <0 ff>;
+			ranges = <02000000 0 a0000000 a0000000 0 20000000
+				  01000000 0 00000000 e3000000 0 00100000>;
+			clock-frequency = <1fca055>;
+			interrupt-parent = <&mpic>;
+			interrupts = <19 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0 */
+				0000 0 0 1 &mpic 44 1
+				0000 0 0 2 &mpic 45 1
+				0000 0 0 3 &mpic 46 1
+				0000 0 0 4 &mpic 47 1
+				>;
+		};
+
+		mpic: pic@40000 {
 			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
@@ -317,23 +332,7 @@
 			built-in;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
-			interrupts = <
-				10 2 11 2 12 2 13 2
-				14 2 15 2 16 2 17 2
-				18 2 19 2 1a 2 1b 2
-				1c 2 1d 2 1e 2 1f 2
-				20 2 21 2 22 2 23 2
-				24 2 25 2 26 2 27 2
-				28 2 29 2 2a 2 2b 2
-				2c 2 2d 2 2e 2 2f 2
-				30 2 31 2 32 2 33 2
-				34 2 35 2 36 2 37 2
-				38 2 39 2 2a 2 3b 2
-				3c 2 3d 2 3e 2 3f 2
-				48 1 49 2 4a 1
-				>;
-			interrupt-parent = <40000>;
+			big-endian;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 5d4005239b83..c0d06fd12927 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -18,7 +18,6 @@
 	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		linux,phandle = <200>;
@@ -37,7 +36,6 @@
 			interrupts = <f 2>;	// decrementer interrupt
 			interrupt-parent = <ff000000>;
 			linux,phandle = <201>;
-			linux,boot-cpu;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index cf1a19f962c5..110bf6170603 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -18,7 +18,6 @@
 	linux,phandle = <100>;
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		linux,phandle = <200>;
@@ -37,7 +36,6 @@
 			interrupts = <f 2>;	// decrementer interrupt
 			interrupt-parent = <ff000000>;
 			linux,phandle = <201>;
-			linux,boot-cpu;
 		};
 	};
 
diff --git a/arch/powerpc/boot/elf.h b/arch/powerpc/boot/elf.h
index d4828fcf1cb9..1941bc50d4c5 100644
--- a/arch/powerpc/boot/elf.h
+++ b/arch/powerpc/boot/elf.h
@@ -146,4 +146,12 @@ typedef struct elf64_phdr {
 #define ELFOSABI_NONE	0
 #define ELFOSABI_LINUX	3
 
+struct elf_info {
+	unsigned long loadsize;
+	unsigned long memsize;
+	unsigned long elfoffset;
+};
+int parse_elf64(void *hdr, struct elf_info *info);
+int parse_elf32(void *hdr, struct elf_info *info);
+
 #endif				/* _PPC_BOOT_ELF_H_ */
diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c
new file mode 100644
index 000000000000..7454aa4cc20c
--- /dev/null
+++ b/arch/powerpc/boot/elf_util.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+
+int parse_elf64(void *hdr, struct elf_info *info)
+{
+	Elf64_Ehdr *elf64 = hdr;
+	Elf64_Phdr *elf64ph;
+	unsigned int i;
+
+	if (!(elf64->e_ident[EI_MAG0]  == ELFMAG0	&&
+	      elf64->e_ident[EI_MAG1]  == ELFMAG1	&&
+	      elf64->e_ident[EI_MAG2]  == ELFMAG2	&&
+	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
+	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
+	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+	      elf64->e_type            == ET_EXEC	&&
+	      elf64->e_machine         == EM_PPC64))
+		return 0;
+
+	elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
+				 (unsigned long)elf64->e_phoff);
+	for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++)
+		if (elf64ph->p_type == PT_LOAD)
+			break;
+	if (i >= (unsigned int)elf64->e_phnum)
+		return 0;
+
+	info->loadsize = (unsigned long)elf64ph->p_filesz;
+	info->memsize = (unsigned long)elf64ph->p_memsz;
+	info->elfoffset = (unsigned long)elf64ph->p_offset;
+
+	return 1;
+}
+
+int parse_elf32(void *hdr, struct elf_info *info)
+{
+	Elf32_Ehdr *elf32 = hdr;
+	Elf32_Phdr *elf32ph;
+	unsigned int i;
+
+	if (!(elf32->e_ident[EI_MAG0]  == ELFMAG0	&&
+	      elf32->e_ident[EI_MAG1]  == ELFMAG1	&&
+	      elf32->e_ident[EI_MAG2]  == ELFMAG2	&&
+	      elf32->e_ident[EI_MAG3]  == ELFMAG3	&&
+	      elf32->e_ident[EI_CLASS] == ELFCLASS32	&&
+	      elf32->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+	      elf32->e_type            == ET_EXEC	&&
+	      elf32->e_machine         == EM_PPC))
+		return 0;
+
+	elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff);
+	for (i = 0; i < elf32->e_phnum; i++, elf32ph++)
+		if (elf32ph->p_type == PT_LOAD)
+			break;
+	if (i >= elf32->e_phnum)
+		return 0;
+
+	info->loadsize = elf32ph->p_filesz;
+	info->memsize = elf32ph->p_memsz;
+	info->elfoffset = elf32ph->p_offset;
+	return 1;
+}
diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c
index c76c194715b2..d00fbd92a458 100644
--- a/arch/powerpc/boot/flatdevtree.c
+++ b/arch/powerpc/boot/flatdevtree.c
@@ -29,12 +29,20 @@
 
 #define _ALIGN(x, al)	(((x) + (al) - 1) & ~((al) - 1))
 
+static char *ft_root_node(struct ft_cxt *cxt)
+{
+	return cxt->rgn[FT_STRUCT].start;
+}
+
 /* Routines for keeping node ptrs returned by ft_find_device current */
 /* First entry not used b/c it would return 0 and be taken as NULL/error */
-static void *ft_node_add(struct ft_cxt *cxt, char *node)
+static void *ft_get_phandle(struct ft_cxt *cxt, char *node)
 {
 	unsigned int i;
 
+	if (!node)
+		return NULL;
+
 	for (i = 1; i < cxt->nodes_used; i++)	/* already there? */
 		if (cxt->node_tbl[i] == node)
 			return (void *)i;
@@ -238,7 +246,7 @@ static int ft_shuffle(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn,
 			if (rgn == FT_STRUCT)
 				ft_node_update_before(cxt, p, -nextra);
 		}
-		*p -= nextra;
+		*pp -= nextra;
 		cxt->rgn[rgn].start -= nextra;
 		cxt->rgn[rgn].size += nextra;
 		return 1;
@@ -253,8 +261,14 @@ static int ft_make_space(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn,
 	char *str, *next;
 	enum ft_rgn_id r;
 
-	if (!cxt->isordered && !ft_reorder(cxt, nextra))
-		return 0;
+	if (!cxt->isordered) {
+		unsigned long rgn_off = *pp - cxt->rgn[rgn].start;
+
+		if (!ft_reorder(cxt, nextra))
+			return 0;
+
+		*pp = cxt->rgn[rgn].start + rgn_off;
+	}
 	if (ft_shuffle(cxt, pp, rgn, nextra))
 		return 1;
 
@@ -415,7 +429,7 @@ int ft_prop(struct ft_cxt *cxt, const char *name, const void *data,
 {
 	int off, len;
 
-	off = lookup_string(cxt, name);
+	off = map_string(cxt, name);
 	if (off == NO_STRING)
 		return -1;
 
@@ -590,7 +604,7 @@ int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size)
 
 void ft_begin_tree(struct ft_cxt *cxt)
 {
-	cxt->p = cxt->rgn[FT_STRUCT].start;
+	cxt->p = ft_root_node(cxt);
 }
 
 void ft_end_tree(struct ft_cxt *cxt)
@@ -636,8 +650,21 @@ void *ft_find_device(struct ft_cxt *cxt, const char *srch_path)
 	/* require absolute path */
 	if (srch_path[0] != '/')
 		return NULL;
-	node = ft_find_descendent(cxt, cxt->rgn[FT_STRUCT].start, srch_path);
-	return ft_node_add(cxt, node);
+	node = ft_find_descendent(cxt, ft_root_node(cxt), srch_path);
+	return ft_get_phandle(cxt, node);
+}
+
+void *ft_find_device_rel(struct ft_cxt *cxt, const void *top,
+                         const char *srch_path)
+{
+	char *node;
+
+	node = ft_node_ph2node(cxt, top);
+	if (node == NULL)
+		return NULL;
+
+	node = ft_find_descendent(cxt, node, srch_path);
+	return ft_get_phandle(cxt, node);
 }
 
 void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path)
@@ -701,23 +728,18 @@ void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path)
 	return NULL;
 }
 
-void *ft_get_parent(struct ft_cxt *cxt, const void *phandle)
+void *__ft_get_parent(struct ft_cxt *cxt, void *node)
 {
-	void *node;
 	int d;
 	struct ft_atom atom;
 	char *p;
 
-	node = ft_node_ph2node(cxt, phandle);
-	if (node == NULL)
-		return NULL;
-
 	for (d = 0; cxt->genealogy[d] != NULL; ++d)
 		if (cxt->genealogy[d] == node)
-			return cxt->genealogy[d > 0 ? d - 1 : 0];
+			return d > 0 ? cxt->genealogy[d - 1] : NULL;
 
 	/* have to do it the hard way... */
-	p = cxt->rgn[FT_STRUCT].start;
+	p = ft_root_node(cxt);
 	d = 0;
 	while ((p = ft_next(cxt, p, &atom)) != NULL) {
 		switch (atom.tag) {
@@ -726,7 +748,7 @@ void *ft_get_parent(struct ft_cxt *cxt, const void *phandle)
 			if (node == atom.data) {
 				/* found it */
 				cxt->genealogy[d + 1] = NULL;
-				return d > 0 ? cxt->genealogy[d - 1] : node;
+				return d > 0 ? cxt->genealogy[d - 1] : NULL;
 			}
 			++d;
 			break;
@@ -738,41 +760,131 @@ void *ft_get_parent(struct ft_cxt *cxt, const void *phandle)
 	return NULL;
 }
 
-int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
-		void *buf, const unsigned int buflen)
+void *ft_get_parent(struct ft_cxt *cxt, const void *phandle)
 {
-	struct ft_atom atom;
-	void *node;
-	char *p;
-	int depth;
-	unsigned int size;
-
-	node = ft_node_ph2node(cxt, phandle);
+	void *node = ft_node_ph2node(cxt, phandle);
 	if (node == NULL)
-		return -1;
+		return NULL;
 
-	depth = 0;
-	p = (char *)node;
+	node = __ft_get_parent(cxt, node);
+	return ft_get_phandle(cxt, node);
+}
 
-	while ((p = ft_next(cxt, p, &atom)) != NULL) {
+static const void *__ft_get_prop(struct ft_cxt *cxt, void *node,
+                                 const char *propname, unsigned int *len)
+{
+	struct ft_atom atom;
+	int depth = 0;
+
+	while ((node = ft_next(cxt, node, &atom)) != NULL) {
 		switch (atom.tag) {
 		case OF_DT_BEGIN_NODE:
 			++depth;
 			break;
+
 		case OF_DT_PROP:
-			if ((depth != 1) || strcmp(atom.name, propname))
+			if (depth != 1 || strcmp(atom.name, propname))
 				break;
-			size = min(atom.size, buflen);
-			memcpy(buf, atom.data, size);
-			return atom.size;
+
+			if (len)
+				*len = atom.size;
+
+			return atom.data;
+
 		case OF_DT_END_NODE:
 			if (--depth <= 0)
-				return -1;
+				return NULL;
 		}
 	}
+
+	return NULL;
+}
+
+int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
+		void *buf, const unsigned int buflen)
+{
+	const void *data;
+	unsigned int size;
+
+	void *node = ft_node_ph2node(cxt, phandle);
+	if (!node)
+		return -1;
+
+	data = __ft_get_prop(cxt, node, propname, &size);
+	if (data) {
+		unsigned int clipped_size = min(size, buflen);
+		memcpy(buf, data, clipped_size);
+		return size;
+	}
+
 	return -1;
 }
 
+void *__ft_find_node_by_prop_value(struct ft_cxt *cxt, void *prev,
+                                   const char *propname, const char *propval,
+                                   unsigned int proplen)
+{
+	struct ft_atom atom;
+	char *p = ft_root_node(cxt);
+	char *next;
+	int past_prev = prev ? 0 : 1;
+	int depth = -1;
+
+	while ((next = ft_next(cxt, p, &atom)) != NULL) {
+		const void *data;
+		unsigned int size;
+
+		switch (atom.tag) {
+		case OF_DT_BEGIN_NODE:
+			depth++;
+
+			if (prev == p) {
+				past_prev = 1;
+				break;
+			}
+
+			if (!past_prev || depth < 1)
+				break;
+
+			data = __ft_get_prop(cxt, p, propname, &size);
+			if (!data || size != proplen)
+				break;
+			if (memcmp(data, propval, size))
+				break;
+
+			return p;
+
+		case OF_DT_END_NODE:
+			if (depth-- == 0)
+				return NULL;
+
+			break;
+		}
+
+		p = next;
+	}
+
+	return NULL;
+}
+
+void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev,
+                                 const char *propname, const char *propval,
+                                 int proplen)
+{
+	void *node = NULL;
+
+	if (prev) {
+		node = ft_node_ph2node(cxt, prev);
+
+		if (!node)
+			return NULL;
+	}
+
+	node = __ft_find_node_by_prop_value(cxt, node, propname,
+	                                    propval, proplen);
+	return ft_get_phandle(cxt, node);
+}
+
 int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
 		const void *buf, const unsigned int buflen)
 {
@@ -849,19 +961,26 @@ int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname)
 	return -1;
 }
 
-void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *path)
+void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name)
 {
 	struct ft_atom atom;
 	char *p, *next;
 	int depth = 0;
 
-	p = cxt->rgn[FT_STRUCT].start;
+	if (parent) {
+		p = ft_node_ph2node(cxt, parent);
+		if (!p)
+			return NULL;
+	} else {
+		p = ft_root_node(cxt);
+	}
+
 	while ((next = ft_next(cxt, p, &atom)) != NULL) {
 		switch (atom.tag) {
 		case OF_DT_BEGIN_NODE:
 			++depth;
-			if (depth == 1 && strcmp(atom.name, path) == 0)
-				/* duplicate node path, return error */
+			if (depth == 1 && strcmp(atom.name, name) == 0)
+				/* duplicate node name, return error */
 				return NULL;
 			break;
 		case OF_DT_END_NODE:
@@ -870,7 +989,7 @@ void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *path)
 				break;
 			/* end of node, insert here */
 			cxt->p = p;
-			ft_begin_node(cxt, path);
+			ft_begin_node(cxt, name);
 			ft_end_node(cxt);
 			return p;
 		}
diff --git a/arch/powerpc/boot/flatdevtree.h b/arch/powerpc/boot/flatdevtree.h
index b9cd9f61f351..cb26325d72db 100644
--- a/arch/powerpc/boot/flatdevtree.h
+++ b/arch/powerpc/boot/flatdevtree.h
@@ -97,10 +97,17 @@ int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
 void ft_dump_blob(const void *bphp);
 void ft_merge_blob(struct ft_cxt *cxt, void *blob);
 void *ft_find_device(struct ft_cxt *cxt, const char *srch_path);
+void *ft_find_device_rel(struct ft_cxt *cxt, const void *top,
+                         const char *srch_path);
 void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path);
 int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
 		void *buf, const unsigned int buflen);
 int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
 		const void *buf, const unsigned int buflen);
+void *ft_get_parent(struct ft_cxt *cxt, const void *phandle);
+void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev,
+                                 const char *propname, const char *propval,
+                                 int proplen);
+void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name);
 
 #endif /* FLATDEVTREE_H */
diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c
index 04da38fa477f..4341e6558c1a 100644
--- a/arch/powerpc/boot/flatdevtree_misc.c
+++ b/arch/powerpc/boot/flatdevtree_misc.c
@@ -16,24 +16,43 @@
 
 static struct ft_cxt cxt;
 
-static void *ft_finddevice(const char *name)
+static void *fdtm_finddevice(const char *name)
 {
 	return ft_find_device(&cxt, name);
 }
 
-static int ft_getprop(const void *phandle, const char *propname, void *buf,
-		const int buflen)
+static int fdtm_getprop(const void *phandle, const char *propname,
+                        void *buf, const int buflen)
 {
 	return ft_get_prop(&cxt, phandle, propname, buf, buflen);
 }
 
-static int ft_setprop(const void *phandle, const char *propname,
-		const void *buf, const int buflen)
+static int fdtm_setprop(const void *phandle, const char *propname,
+                        const void *buf, const int buflen)
 {
 	return ft_set_prop(&cxt, phandle, propname, buf, buflen);
 }
 
-static unsigned long ft_finalize(void)
+static void *fdtm_get_parent(const void *phandle)
+{
+	return ft_get_parent(&cxt, phandle);
+}
+
+static void *fdtm_create_node(const void *phandle, const char *name)
+{
+	return ft_create_node(&cxt, phandle, name);
+}
+
+static void *fdtm_find_node_by_prop_value(const void *prev,
+                                          const char *propname,
+                                          const char *propval,
+                                          int proplen)
+{
+	return ft_find_node_by_prop_value(&cxt, prev, propname,
+	                                  propval, proplen);
+}
+
+static unsigned long fdtm_finalize(void)
 {
 	ft_end_tree(&cxt);
 	return (unsigned long)cxt.bph;
@@ -41,10 +60,13 @@ static unsigned long ft_finalize(void)
 
 int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device)
 {
-	dt_ops.finddevice = ft_finddevice;
-	dt_ops.getprop = ft_getprop;
-	dt_ops.setprop = ft_setprop;
-	dt_ops.finalize = ft_finalize;
+	dt_ops.finddevice = fdtm_finddevice;
+	dt_ops.getprop = fdtm_getprop;
+	dt_ops.setprop = fdtm_setprop;
+	dt_ops.get_parent = fdtm_get_parent;
+	dt_ops.create_node = fdtm_create_node;
+	dt_ops.find_node_by_prop_value = fdtm_find_node_by_prop_value;
+	dt_ops.finalize = fdtm_finalize;
 
 	return ft_open(&cxt, dt_blob, max_size, max_find_device,
 			platform_ops.realloc);
diff --git a/arch/powerpc/boot/gunzip_util.c b/arch/powerpc/boot/gunzip_util.c
new file mode 100644
index 000000000000..df8ab07e9ff4
--- /dev/null
+++ b/arch/powerpc/boot/gunzip_util.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Based on earlier work, Copyright (C) Paul Mackerras 1997.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <stddef.h>
+#include "string.h"
+#include "stdio.h"
+#include "ops.h"
+#include "gunzip_util.h"
+
+#define HEAD_CRC	2
+#define EXTRA_FIELD	4
+#define ORIG_NAME	8
+#define COMMENT		0x10
+#define RESERVED	0xe0
+
+/**
+ * gunzip_start - prepare to decompress gzip data
+ * @state:     decompressor state structure to be initialized
+ * @src:       buffer containing gzip compressed or uncompressed data
+ * @srclen:    size in bytes of the buffer at src
+ *
+ * If the buffer at @src contains a gzip header, this function
+ * initializes zlib to decompress the data, storing the decompression
+ * state in @state.  The other functions in this file can then be used
+ * to decompress data from the gzipped stream.
+ *
+ * If the buffer at @src does not contain a gzip header, it is assumed
+ * to contain uncompressed data.  The buffer information is recorded
+ * in @state and the other functions in this file will simply copy
+ * data from the uncompressed data stream at @src.
+ *
+ * Any errors, such as bad compressed data, cause an error to be
+ * printed an the platform's exit() function to be called.
+ */
+void gunzip_start(struct gunzip_state *state, void *src, int srclen)
+{
+	char *hdr = src;
+	int hdrlen = 0;
+
+	memset(state, 0, sizeof(*state));
+
+	/* Check for gzip magic number */
+	if ((hdr[0] == 0x1f) && (hdr[1] == 0x8b)) {
+		/* gzip data, initialize zlib parameters */
+		int r, flags;
+
+		state->s.workspace = state->scratch;
+		if (zlib_inflate_workspacesize() > sizeof(state->scratch))
+			fatal("insufficient scratch space for gunzip\n\r");
+
+		/* skip header */
+		hdrlen = 10;
+		flags = hdr[3];
+		if (hdr[2] != Z_DEFLATED || (flags & RESERVED) != 0)
+			fatal("bad gzipped data\n\r");
+		if ((flags & EXTRA_FIELD) != 0)
+			hdrlen = 12 + hdr[10] + (hdr[11] << 8);
+		if ((flags & ORIG_NAME) != 0)
+			while (hdr[hdrlen++] != 0)
+				;
+		if ((flags & COMMENT) != 0)
+			while (hdr[hdrlen++] != 0)
+				;
+		if ((flags & HEAD_CRC) != 0)
+			hdrlen += 2;
+		if (hdrlen >= srclen)
+			fatal("gunzip_start: ran out of data in header\n\r");
+
+		r = zlib_inflateInit2(&state->s, -MAX_WBITS);
+		if (r != Z_OK)
+			fatal("inflateInit2 returned %d\n\r", r);
+	}
+
+	state->s.next_in = src + hdrlen;
+	state->s.avail_in = srclen - hdrlen;
+}
+
+/**
+ * gunzip_partial - extract bytes from a gzip data stream
+ * @state:     gzip state structure previously initialized by gunzip_start()
+ * @dst:       buffer to store extracted data
+ * @dstlen:    maximum number of bytes to extract
+ *
+ * This function extracts at most @dstlen bytes from the data stream
+ * previously associated with @state by gunzip_start(), decompressing
+ * if necessary.  Exactly @dstlen bytes are extracted unless the data
+ * stream doesn't contain enough bytes, in which case the entire
+ * remainder of the stream is decompressed.
+ *
+ * Returns the actual number of bytes extracted.  If any errors occur,
+ * such as a corrupted compressed stream, an error is printed an the
+ * platform's exit() function is called.
+ */
+int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen)
+{
+	int len;
+
+	if (state->s.workspace) {
+		/* gunzipping */
+		int r;
+
+		state->s.next_out = dst;
+		state->s.avail_out = dstlen;
+		r = zlib_inflate(&state->s, Z_FULL_FLUSH);
+		if (r != Z_OK && r != Z_STREAM_END)
+			fatal("inflate returned %d msg: %s\n\r", r, state->s.msg);
+		len = state->s.next_out - (unsigned char *)dst;
+	} else {
+		/* uncompressed image */
+		len = min(state->s.avail_in, (unsigned)dstlen);
+		memcpy(dst, state->s.next_in, len);
+		state->s.next_in += len;
+		state->s.avail_in -= len;
+	}
+	return len;
+}
+
+/**
+ * gunzip_exactly - extract a fixed number of bytes from a gzip data stream
+ * @state:     gzip state structure previously initialized by gunzip_start()
+ * @dst:       buffer to store extracted data
+ * @dstlen:    number of bytes to extract
+ *
+ * This function extracts exactly @dstlen bytes from the data stream
+ * previously associated with @state by gunzip_start(), decompressing
+ * if necessary.
+ *
+ * If there are less @dstlen bytes available in the data stream, or if
+ * any other errors occur, such as a corrupted compressed stream, an
+ * error is printed an the platform's exit() function is called.
+ */
+void gunzip_exactly(struct gunzip_state *state, void *dst, int dstlen)
+{
+	int len;
+
+	len  = gunzip_partial(state, dst, dstlen);
+	if (len < dstlen)
+		fatal("\n\rgunzip_exactly: ran out of data!"
+				" Wanted %d, got %d.\n\r", dstlen, len);
+}
+
+/**
+ * gunzip_discard - discard bytes from a gzip data stream
+ * @state:     gzip state structure previously initialized by gunzip_start()
+ * @len:       number of bytes to discard
+ *
+ * This function extracts, then discards exactly @len bytes from the
+ * data stream previously associated with @state by gunzip_start().
+ * Subsequent gunzip_partial(), gunzip_exactly() or gunzip_finish()
+ * calls will extract the data following the discarded bytes in the
+ * data stream.
+ *
+ * If there are less @len bytes available in the data stream, or if
+ * any other errors occur, such as a corrupted compressed stream, an
+ * error is printed an the platform's exit() function is called.
+ */
+void gunzip_discard(struct gunzip_state *state, int len)
+{
+	static char discard_buf[128];
+
+	while (len > sizeof(discard_buf)) {
+		gunzip_exactly(state, discard_buf, sizeof(discard_buf));
+		len -= sizeof(discard_buf);
+	}
+
+	if (len > 0)
+		gunzip_exactly(state, discard_buf, len);
+}
+
+/**
+ * gunzip_finish - extract all remaining bytes from a gzip data stream
+ * @state:     gzip state structure previously initialized by gunzip_start()
+ * @dst:       buffer to store extracted data
+ * @dstlen:    maximum number of bytes to extract
+ *
+ * This function extracts all remaining data, or at most @dstlen
+ * bytes, from the stream previously associated with @state by
+ * gunzip_start().  zlib is then shut down, so it is an error to use
+ * any of the functions in this file on @state until it is
+ * re-initialized with another call to gunzip_start().
+ *
+ * If any errors occur, such as a corrupted compressed stream, an
+ * error is printed an the platform's exit() function is called.
+ */
+int gunzip_finish(struct gunzip_state *state, void *dst, int dstlen)
+{
+	int len;
+
+	if (state->s.workspace) {
+		len = gunzip_partial(state, dst, dstlen);
+		zlib_inflateEnd(&state->s);
+	} else {
+		/* uncompressed image */
+		len = min(state->s.avail_in, (unsigned)dstlen);
+		memcpy(dst, state->s.next_in, len);
+	}
+
+	return len;
+}
diff --git a/arch/powerpc/boot/gunzip_util.h b/arch/powerpc/boot/gunzip_util.h
new file mode 100644
index 000000000000..b3dfa6e87b3a
--- /dev/null
+++ b/arch/powerpc/boot/gunzip_util.h
@@ -0,0 +1,45 @@
+/*
+ * Decompression convenience functions
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef _PPC_BOOT_GUNZIP_UTIL_H_
+#define _PPC_BOOT_GUNZIP_UTIL_H_
+
+#include "zlib.h"
+
+/*
+ * These functions are designed to make life easy for decompressing
+ * kernel images, initrd images or any other gzip compressed image,
+ * particularly if its useful to decompress part of the image (e.g. to
+ * examine headers) before decompressing the remainder.
+ *
+ * To use:
+ *     - declare a gunzip_state structure
+ *     - use gunzip_start() to initialize the state, associating it
+ *       with a stream of compressed data
+ *     - use gunzip_partial(), gunzip_exactly() and gunzip_discard()
+ *       in any combination to extract pieces of data from the stream
+ *     - Finally use gunzip_finish() to extract the tail of the
+ *       compressed stream and wind up zlib
+ */
+
+/* scratch space for gunzip; 46912 is from zlib_inflate_workspacesize() */
+#define GUNZIP_SCRATCH_SIZE	46912
+
+struct gunzip_state {
+	z_stream s;
+	char scratch[46912];
+};
+
+void gunzip_start(struct gunzip_state *state, void *src, int srclen);
+int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen);
+void gunzip_exactly(struct gunzip_state *state, void *dst, int len);
+void gunzip_discard(struct gunzip_state *state, int len);
+int gunzip_finish(struct gunzip_state *state, void *dst, int len);
+
+#endif /* _PPC_BOOT_GUNZIP_UTIL_H_ */
diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c
index 6f6b50d238b6..56b56a8d4b23 100644
--- a/arch/powerpc/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -14,11 +14,10 @@
 #include "page.h"
 #include "string.h"
 #include "stdio.h"
-#include "zlib.h"
 #include "ops.h"
+#include "gunzip_util.h"
 #include "flatdevtree.h"
-
-extern void flush_cache(void *, unsigned long);
+#include "reg.h"
 
 extern char _start[];
 extern char __bss_start[];
@@ -30,304 +29,173 @@ extern char _initrd_end[];
 extern char _dtb_start[];
 extern char _dtb_end[];
 
+static struct gunzip_state gzstate;
+
 struct addr_range {
-	unsigned long addr;
+	void *addr;
 	unsigned long size;
-	unsigned long memsize;
 };
-static struct addr_range vmlinux;
-static struct addr_range vmlinuz;
-static struct addr_range initrd;
-
-static unsigned long elfoffset;
-static int is_64bit;
-
-/* scratch space for gunzip; 46912 is from zlib_inflate_workspacesize() */
-static char scratch[46912];
-static char elfheader[256];
 
 typedef void (*kernel_entry_t)(unsigned long, unsigned long, void *);
 
 #undef DEBUG
 
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
+static struct addr_range prep_kernel(void)
 {
-	z_stream s;
-	int r, i, flags;
-
-	/* skip header */
-	i = 10;
-	flags = src[3];
-	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-		printf("bad gzipped data\n\r");
-		exit();
-	}
-	if ((flags & EXTRA_FIELD) != 0)
-		i = 12 + src[10] + (src[11] << 8);
-	if ((flags & ORIG_NAME) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & COMMENT) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & HEAD_CRC) != 0)
-		i += 2;
-	if (i >= *lenp) {
-		printf("gunzip: ran out of data in header\n\r");
-		exit();
-	}
+	char elfheader[256];
+	void *vmlinuz_addr = _vmlinux_start;
+	unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
+	void *addr = 0;
+	struct elf_info ei;
+	int len;
 
-	if (zlib_inflate_workspacesize() > sizeof(scratch)) {
-		printf("gunzip needs more mem\n");
-		exit();
-	}
-	memset(&s, 0, sizeof(s));
-	s.workspace = scratch;
-	r = zlib_inflateInit2(&s, -MAX_WBITS);
-	if (r != Z_OK) {
-		printf("inflateInit2 returned %d\n\r", r);
-		exit();
-	}
-	s.next_in = src + i;
-	s.avail_in = *lenp - i;
-	s.next_out = dst;
-	s.avail_out = dstlen;
-	r = zlib_inflate(&s, Z_FULL_FLUSH);
-	if (r != Z_OK && r != Z_STREAM_END) {
-		printf("inflate returned %d msg: %s\n\r", r, s.msg);
-		exit();
+	/* gunzip the ELF header of the kernel */
+	gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
+	gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
+
+	if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei))
+		fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+
+	if (platform_ops.image_hdr)
+		platform_ops.image_hdr(elfheader);
+
+	/* We need to alloc the memsize: gzip will expand the kernel
+	 * text/data, then possible rubbish we don't care about. But
+	 * the kernel bss must be claimed (it will be zero'd by the
+	 * kernel itself)
+	 */
+	printf("Allocating 0x%lx bytes for kernel ...\n\r", ei.memsize);
+
+	if (platform_ops.vmlinux_alloc) {
+		addr = platform_ops.vmlinux_alloc(ei.memsize);
+	} else {
+		if ((unsigned long)_start < ei.memsize)
+			fatal("Insufficient memory for kernel at address 0!"
+			       " (_start=%p)\n\r", _start);
 	}
-	*lenp = s.next_out - (unsigned char *) dst;
-	zlib_inflateEnd(&s);
-}
 
-static int is_elf64(void *hdr)
-{
-	Elf64_Ehdr *elf64 = hdr;
-	Elf64_Phdr *elf64ph;
-	unsigned int i;
-
-	if (!(elf64->e_ident[EI_MAG0]  == ELFMAG0	&&
-	      elf64->e_ident[EI_MAG1]  == ELFMAG1	&&
-	      elf64->e_ident[EI_MAG2]  == ELFMAG2	&&
-	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
-	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
-	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
-	      elf64->e_type            == ET_EXEC	&&
-	      elf64->e_machine         == EM_PPC64))
-		return 0;
-
-	elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
-				 (unsigned long)elf64->e_phoff);
-	for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++)
-		if (elf64ph->p_type == PT_LOAD)
-			break;
-	if (i >= (unsigned int)elf64->e_phnum)
-		return 0;
-
-	elfoffset = (unsigned long)elf64ph->p_offset;
-	vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset;
-	vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset;
-
-	is_64bit = 1;
-	return 1;
-}
+	/* Finally, gunzip the kernel */
+	printf("gunzipping (0x%p <- 0x%p:0x%p)...", addr,
+	       vmlinuz_addr, vmlinuz_addr+vmlinuz_size);
+	/* discard up to the actual load data */
+	gunzip_discard(&gzstate, ei.elfoffset - sizeof(elfheader));
+	len = gunzip_finish(&gzstate, addr, ei.loadsize);
+	if (len != ei.loadsize)
+		fatal("ran out of data!  only got 0x%x of 0x%lx bytes.\n\r",
+				len, ei.loadsize);
+	printf("done 0x%x bytes\n\r", len);
 
-static int is_elf32(void *hdr)
-{
-	Elf32_Ehdr *elf32 = hdr;
-	Elf32_Phdr *elf32ph;
-	unsigned int i;
-
-	if (!(elf32->e_ident[EI_MAG0]  == ELFMAG0	&&
-	      elf32->e_ident[EI_MAG1]  == ELFMAG1	&&
-	      elf32->e_ident[EI_MAG2]  == ELFMAG2	&&
-	      elf32->e_ident[EI_MAG3]  == ELFMAG3	&&
-	      elf32->e_ident[EI_CLASS] == ELFCLASS32	&&
-	      elf32->e_ident[EI_DATA]  == ELFDATA2MSB	&&
-	      elf32->e_type            == ET_EXEC	&&
-	      elf32->e_machine         == EM_PPC))
-		return 0;
-
-	elf32 = (Elf32_Ehdr *)elfheader;
-	elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff);
-	for (i = 0; i < elf32->e_phnum; i++, elf32ph++)
-		if (elf32ph->p_type == PT_LOAD)
-			break;
-	if (i >= elf32->e_phnum)
-		return 0;
-
-	elfoffset = elf32ph->p_offset;
-	vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset;
-	vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset;
-	return 1;
+	flush_cache(addr, ei.loadsize);
+
+	return (struct addr_range){addr, ei.memsize};
 }
 
-static void prep_kernel(unsigned long a1, unsigned long a2)
+static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen,
+				     unsigned long initrd_addr,
+				     unsigned long initrd_size)
 {
-	int len;
-
-	vmlinuz.addr = (unsigned long)_vmlinux_start;
-	vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
-
-	/* gunzip the ELF header of the kernel */
-	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
-		len = vmlinuz.size;
-		gunzip(elfheader, sizeof(elfheader),
-				(unsigned char *)vmlinuz.addr, &len);
-	} else
-		memcpy(elfheader, (const void *)vmlinuz.addr,
-		       sizeof(elfheader));
-
-	if (!is_elf64(elfheader) && !is_elf32(elfheader)) {
-		printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
-		exit();
+	/* If we have an image attached to us, it overrides anything
+	 * supplied by the loader. */
+	if (_initrd_end > _initrd_start) {
+		printf("Attached initrd image at 0x%p-0x%p\n\r",
+		       _initrd_start, _initrd_end);
+		initrd_addr = (unsigned long)_initrd_start;
+		initrd_size = _initrd_end - _initrd_start;
+	} else if (initrd_size > 0) {
+		printf("Using loader supplied ramdisk at 0x%lx-0x%lx\n\r",
+		       initrd_addr, initrd_addr + initrd_size);
 	}
-	if (platform_ops.image_hdr)
-		platform_ops.image_hdr(elfheader);
 
-	/* We need to alloc the memsize plus the file offset since gzip
-	 * will expand the header (file offset), then the kernel, then
-	 * possible rubbish we don't care about. But the kernel bss must
-	 * be claimed (it will be zero'd by the kernel itself)
-	 */
-	printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize);
-	vmlinux.addr = (unsigned long)malloc(vmlinux.memsize);
-	if (vmlinux.addr == 0) {
-		printf("Can't allocate memory for kernel image !\n\r");
-		exit();
-	}
+	/* If there's no initrd at all, we're done */
+	if (! initrd_size)
+		return (struct addr_range){0, 0};
 
 	/*
-	 * Now find the initrd
-	 *
-	 * First see if we have an image attached to us.  If so
-	 * allocate memory for it and copy it there.
+	 * If the initrd is too low it will be clobbered when the
+	 * kernel relocates to its final location.  In this case,
+	 * allocate a safer place and move it.
 	 */
-	initrd.size = (unsigned long)(_initrd_end - _initrd_start);
-	initrd.memsize = initrd.size;
-	if (initrd.size > 0) {
+	if (initrd_addr < vmlinux.size) {
+		void *old_addr = (void *)initrd_addr;
+
 		printf("Allocating 0x%lx bytes for initrd ...\n\r",
-		       initrd.size);
-		initrd.addr = (unsigned long)malloc((u32)initrd.size);
-		if (initrd.addr == 0) {
-			printf("Can't allocate memory for initial "
-					"ramdisk !\n\r");
-			exit();
-		}
-		printf("initial ramdisk moving 0x%lx <- 0x%lx "
-			"(0x%lx bytes)\n\r", initrd.addr,
-			(unsigned long)_initrd_start, initrd.size);
-		memmove((void *)initrd.addr, (void *)_initrd_start,
-			initrd.size);
-		printf("initrd head: 0x%lx\n\r",
-				*((unsigned long *)initrd.addr));
-	} else if (a2 != 0) {
-		/* Otherwise, see if yaboot or another loader gave us an initrd */
-		initrd.addr = a1;
-		initrd.memsize = initrd.size = a2;
-		printf("Using loader supplied initrd at 0x%lx (0x%lx bytes)\n\r",
-		       initrd.addr, initrd.size);
+		       initrd_size);
+		initrd_addr = (unsigned long)malloc(initrd_size);
+		if (! initrd_addr)
+			fatal("Can't allocate memory for initial "
+			       "ramdisk !\n\r");
+		printf("Relocating initrd 0x%lx <- 0x%p (0x%lx bytes)\n\r",
+		       initrd_addr, old_addr, initrd_size);
+		memmove((void *)initrd_addr, old_addr, initrd_size);
 	}
 
-	/* Eventually gunzip the kernel */
-	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
-		printf("gunzipping (0x%lx <- 0x%lx:0x%0lx)...",
-		       vmlinux.addr, vmlinuz.addr, vmlinuz.addr+vmlinuz.size);
-		len = vmlinuz.size;
-		gunzip((void *)vmlinux.addr, vmlinux.memsize,
-			(unsigned char *)vmlinuz.addr, &len);
-		printf("done 0x%lx bytes\n\r", len);
-	} else {
-		memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,
-			vmlinuz.size);
-	}
+	printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd_addr));
 
-	/* Skip over the ELF header */
-#ifdef DEBUG
-	printf("... skipping 0x%lx bytes of ELF header\n\r",
-			elfoffset);
-#endif
-	vmlinux.addr += elfoffset;
+	/* Tell the kernel initrd address via device tree */
+	setprop_val(chosen, "linux,initrd-start", (u32)(initrd_addr));
+	setprop_val(chosen, "linux,initrd-end", (u32)(initrd_addr+initrd_size));
 
-	flush_cache((void *)vmlinux.addr, vmlinux.size);
+	return (struct addr_range){(void *)initrd_addr, initrd_size};
 }
 
 /* A buffer that may be edited by tools operating on a zImage binary so as to
  * edit the command line passed to vmlinux (by setting /chosen/bootargs).
  * The buffer is put in it's own section so that tools may locate it easier.
  */
-static char builtin_cmdline[COMMAND_LINE_SIZE]
+static char cmdline[COMMAND_LINE_SIZE]
 	__attribute__((__section__("__builtin_cmdline")));
 
-static void get_cmdline(char *buf, int size)
+static void prep_cmdline(void *chosen)
 {
-	void *devp;
-	int len = strlen(builtin_cmdline);
-
-	buf[0] = '\0';
-
-	if (len > 0) { /* builtin_cmdline overrides dt's /chosen/bootargs */
-		len = min(len, size-1);
-		strncpy(buf, builtin_cmdline, len);
-		buf[len] = '\0';
-	}
-	else if ((devp = finddevice("/chosen")))
-		getprop(devp, "bootargs", buf, size);
-}
+	if (cmdline[0] == '\0')
+		getprop(chosen, "bootargs", cmdline, COMMAND_LINE_SIZE-1);
 
-static void set_cmdline(char *buf)
-{
-	void *devp;
+	printf("\n\rLinux/PowerPC load: %s", cmdline);
+	/* If possible, edit the command line */
+	if (console_ops.edit_cmdline)
+		console_ops.edit_cmdline(cmdline, COMMAND_LINE_SIZE);
+	printf("\n\r");
 
-	if ((devp = finddevice("/chosen")))
-		setprop(devp, "bootargs", buf, strlen(buf) + 1);
+	/* Put the command line back into the devtree for the kernel */
+	setprop_str(chosen, "bootargs", cmdline);
 }
 
 struct platform_ops platform_ops;
 struct dt_ops dt_ops;
 struct console_ops console_ops;
+struct loader_info loader_info;
 
-void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
+void start(void)
 {
+	struct addr_range vmlinux, initrd;
 	kernel_entry_t kentry;
-	char cmdline[COMMAND_LINE_SIZE];
 	unsigned long ft_addr = 0;
+	void *chosen;
 
-	memset(__bss_start, 0, _end - __bss_start);
-	memset(&platform_ops, 0, sizeof(platform_ops));
-	memset(&dt_ops, 0, sizeof(dt_ops));
-	memset(&console_ops, 0, sizeof(console_ops));
+	/* Do this first, because malloc() could clobber the loader's
+	 * command line.  Only use the loader command line if a
+	 * built-in command line wasn't set by an external tool */
+	if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0'))
+		memmove(cmdline, loader_info.cmdline,
+			min(loader_info.cmdline_len, COMMAND_LINE_SIZE-1));
 
-	if (platform_init(promptr, _dtb_start, _dtb_end))
-		exit();
 	if (console_ops.open && (console_ops.open() < 0))
 		exit();
 	if (platform_ops.fixups)
 		platform_ops.fixups();
 
 	printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r",
-	       _start, sp);
+	       _start, get_sp());
 
-	prep_kernel(a1, a2);
+	/* Ensure that the device tree has a /chosen node */
+	chosen = finddevice("/chosen");
+	if (!chosen)
+		chosen = create_node(NULL, "chosen");
 
-	/* If cmdline came from zimage wrapper or if we can edit the one
-	 * in the dt, print it out and edit it, if possible.
-	 */
-	if ((strlen(builtin_cmdline) > 0) || console_ops.edit_cmdline) {
-		get_cmdline(cmdline, COMMAND_LINE_SIZE);
-		printf("\n\rLinux/PowerPC load: %s", cmdline);
-		if (console_ops.edit_cmdline)
-			console_ops.edit_cmdline(cmdline, COMMAND_LINE_SIZE);
-		printf("\n\r");
-		set_cmdline(cmdline);
-	}
+	vmlinux = prep_kernel();
+	initrd = prep_initrd(vmlinux, chosen,
+			     loader_info.initrd_addr, loader_info.initrd_size);
+	prep_cmdline(chosen);
 
 	printf("Finalizing device tree...");
 	if (dt_ops.finalize)
@@ -335,7 +203,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 	if (ft_addr)
 		printf(" flat tree at 0x%lx\n\r", ft_addr);
 	else
-		printf(" using OF tree (promptr=%p)\n\r", promptr);
+		printf(" using OF tree (promptr=%p)\n\r", loader_info.promptr);
 
 	if (console_ops.close)
 		console_ops.close();
@@ -344,10 +212,9 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 	if (ft_addr)
 		kentry(ft_addr, 0, NULL);
 	else
-		/* XXX initrd addr/size should be passed in properties */
-		kentry(initrd.addr, initrd.size, promptr);
+		kentry((unsigned long)initrd.addr, initrd.size,
+		       loader_info.promptr);
 
-	/* console closed so printf below may not work */
-	printf("Error: Linux kernel returned to zImage boot wrapper!\n\r");
-	exit();
+	/* console closed so printf in fatal below may not work */
+	fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r");
 }
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
index 1ffe72e35cdc..f8f1b2f31412 100644
--- a/arch/powerpc/boot/ns16550.c
+++ b/arch/powerpc/boot/ns16550.c
@@ -55,10 +55,15 @@ static u8 ns16550_tstc(void)
 int ns16550_console_init(void *devp, struct serial_console_data *scdp)
 {
 	int n;
+	unsigned long reg_phys;
 
 	n = getprop(devp, "virtual-reg", &reg_base, sizeof(reg_base));
-	if (n != sizeof(reg_base))
-		return -1;
+	if (n != sizeof(reg_base)) {
+		if (!dt_xlate_reg(devp, 0, &reg_phys, NULL))
+			return -1;
+
+		reg_base = (void *)reg_phys;
+	}
 
 	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
 	if (n != sizeof(reg_shift))
diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c
index 0182f384f3e6..d16ee3e3f868 100644
--- a/arch/powerpc/boot/of.c
+++ b/arch/powerpc/boot/of.c
@@ -173,7 +173,7 @@ static void *claim(unsigned long virt, unsigned long size, unsigned long align)
 	return (void *) virt;
 }
 
-static void *of_try_claim(u32 size)
+static void *of_try_claim(unsigned long size)
 {
 	unsigned long addr = 0;
 
@@ -208,6 +208,16 @@ static void of_image_hdr(const void *hdr)
 	}
 }
 
+static void *of_vmlinux_alloc(unsigned long size)
+{
+	void *p = malloc(size);
+
+	if (!p)
+		fatal("Can't allocate memory for kernel image!\n\r");
+
+	return p;
+}
+
 static void of_exit(void)
 {
 	call_prom("exit", 0, 0);
@@ -256,11 +266,12 @@ static void of_console_write(char *buf, int len)
 	call_prom("write", 3, 1, of_stdout_handle, buf, len);
 }
 
-int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end)
+void platform_init(unsigned long a1, unsigned long a2, void *promptr)
 {
 	platform_ops.image_hdr = of_image_hdr;
 	platform_ops.malloc = of_try_claim;
 	platform_ops.exit = of_exit;
+	platform_ops.vmlinux_alloc = of_vmlinux_alloc;
 
 	dt_ops.finddevice = of_finddevice;
 	dt_ops.getprop = of_getprop;
@@ -270,5 +281,9 @@ int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end)
 	console_ops.write = of_console_write;
 
 	prom = (int (*)(void *))promptr;
-	return 0;
+	loader_info.promptr = promptr;
+	if (a1 && a2 && a2 != 0xdeadbeef) {
+		loader_info.initrd_addr = a1;
+		loader_info.initrd_size = a2;
+	}
 }
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 8abb6516bb7c..73bd47a3a079 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -11,7 +11,9 @@
 #ifndef _PPC_BOOT_OPS_H_
 #define _PPC_BOOT_OPS_H_
 
+#include <stddef.h>
 #include "types.h"
+#include "string.h"
 
 #define	COMMAND_LINE_SIZE	512
 #define	MAX_PATH_LEN		256
@@ -21,10 +23,11 @@
 struct platform_ops {
 	void	(*fixups)(void);
 	void	(*image_hdr)(const void *);
-	void *	(*malloc)(u32 size);
+	void *	(*malloc)(unsigned long size);
 	void	(*free)(void *ptr);
 	void *	(*realloc)(void *ptr, unsigned long size);
 	void	(*exit)(void);
+	void *	(*vmlinux_alloc)(unsigned long size);
 };
 extern struct platform_ops platform_ops;
 
@@ -35,6 +38,12 @@ struct dt_ops {
 			const int buflen);
 	int	(*setprop)(const void *phandle, const char *name,
 			const void *buf, const int buflen);
+	void *(*get_parent)(const void *phandle);
+	/* The node must not already exist. */
+	void *(*create_node)(const void *parent, const char *name);
+	void *(*find_node_by_prop_value)(const void *prev,
+	                                 const char *propname,
+	                                 const char *propval, int proplen);
 	unsigned long (*finalize)(void);
 };
 extern struct dt_ops dt_ops;
@@ -58,13 +67,23 @@ struct serial_console_data {
 	void		(*close)(void);
 };
 
-int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end);
+struct loader_info {
+	void *promptr;
+	unsigned long initrd_addr, initrd_size;
+	char *cmdline;
+	int cmdline_len;
+};
+extern struct loader_info loader_info;
+
+void start(void);
 int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device);
 int serial_console_init(void);
 int ns16550_console_init(void *devp, struct serial_console_data *scdp);
-void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
-		u32 max_allocs);
-
+void *simple_alloc_init(char *base, unsigned long heap_size,
+			unsigned long granularity, unsigned long max_allocs);
+extern void flush_cache(void *, unsigned long);
+int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size);
+int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr);
 
 static inline void *finddevice(const char *name)
 {
@@ -76,12 +95,76 @@ static inline int getprop(void *devp, const char *name, void *buf, int buflen)
 	return (dt_ops.getprop) ? dt_ops.getprop(devp, name, buf, buflen) : -1;
 }
 
-static inline int setprop(void *devp, const char *name, void *buf, int buflen)
+static inline int setprop(void *devp, const char *name,
+                          const void *buf, int buflen)
 {
 	return (dt_ops.setprop) ? dt_ops.setprop(devp, name, buf, buflen) : -1;
 }
+#define setprop_val(devp, name, val) \
+	do { \
+		typeof(val) x = (val); \
+		setprop((devp), (name), &x, sizeof(x)); \
+	} while (0)
+
+static inline int setprop_str(void *devp, const char *name, const char *buf)
+{
+	if (dt_ops.setprop)
+		return dt_ops.setprop(devp, name, buf, strlen(buf) + 1);
+
+	return -1;
+}
+
+static inline void *get_parent(const char *devp)
+{
+	return dt_ops.get_parent ? dt_ops.get_parent(devp) : NULL;
+}
+
+static inline void *create_node(const void *parent, const char *name)
+{
+	return dt_ops.create_node ? dt_ops.create_node(parent, name) : NULL;
+}
+
 
-static inline void *malloc(u32 size)
+static inline void *find_node_by_prop_value(const void *prev,
+                                            const char *propname,
+                                            const char *propval, int proplen)
+{
+	if (dt_ops.find_node_by_prop_value)
+		return dt_ops.find_node_by_prop_value(prev, propname,
+		                                      propval, proplen);
+
+	return NULL;
+}
+
+static inline void *find_node_by_prop_value_str(const void *prev,
+                                                const char *propname,
+                                                const char *propval)
+{
+	return find_node_by_prop_value(prev, propname, propval,
+	                               strlen(propval) + 1);
+}
+
+static inline void *find_node_by_devtype(const void *prev,
+                                         const char *type)
+{
+	return find_node_by_prop_value_str(prev, "device_type", type);
+}
+
+void dt_fixup_memory(u64 start, u64 size);
+void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq);
+void dt_fixup_clock(const char *path, u32 freq);
+void __dt_fixup_mac_addresses(u32 startindex, ...);
+#define dt_fixup_mac_addresses(...) \
+	__dt_fixup_mac_addresses(0, __VA_ARGS__, NULL)
+
+
+static inline void *find_node_by_linuxphandle(const u32 linuxphandle)
+{
+	return find_node_by_prop_value(NULL, "linux,phandle",
+			(char *)&linuxphandle, sizeof(u32));
+}
+
+static inline void *malloc(unsigned long size)
 {
 	return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL;
 }
@@ -98,5 +181,11 @@ static inline void exit(void)
 		platform_ops.exit();
 	for(;;);
 }
+#define fatal(args...) { printf(args); exit(); }
+
+
+#define BSS_STACK(size) \
+	static char _bss_stack[size]; \
+	void *_platform_stack_top = _bss_stack + sizeof(_bss_stack);
 
 #endif /* _PPC_BOOT_OPS_H_ */
diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h
new file mode 100644
index 000000000000..5290ff2c2b2b
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot.h
@@ -0,0 +1,108 @@
+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+	defined(TARGET_83xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(TARGET_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+	defined(TARGET_85xx) ||	defined(TARGET_83xx)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || defined(TARGET_85xx)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq	bi_intfreq
+
+#endif	/* __PPCBOOT_H__ */
diff --git a/arch/powerpc/boot/reg.h b/arch/powerpc/boot/reg.h
new file mode 100644
index 000000000000..d3cd9ee98afb
--- /dev/null
+++ b/arch/powerpc/boot/reg.h
@@ -0,0 +1,22 @@
+#ifndef _PPC_BOOT_REG_H
+#define _PPC_BOOT_REG_H
+/*
+ * Copyright 2007 Davud Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline u32 mfpvr(void)
+{
+	u32 pvr;
+	asm volatile ("mfpvr	%0" : "=r"(pvr));
+	return pvr;
+}
+
+register void *__stack_pointer asm("r1");
+#define get_sp()	(__stack_pointer)
+
+#endif	/* _PPC_BOOT_REG_H */
diff --git a/arch/powerpc/boot/simple_alloc.c b/arch/powerpc/boot/simple_alloc.c
index cfe3a7505ba0..65ec135d0157 100644
--- a/arch/powerpc/boot/simple_alloc.c
+++ b/arch/powerpc/boot/simple_alloc.c
@@ -19,24 +19,24 @@
 #define	ENTRY_IN_USE	0x02
 
 static struct alloc_info {
-	u32	flags;
-	u32	base;
-	u32	size;
+	unsigned long	flags;
+	unsigned long	base;
+	unsigned long	size;
 } *alloc_tbl;
 
-static u32 tbl_entries;
-static u32 alloc_min;
-static u32 next_base;
-static u32 space_left;
+static unsigned long tbl_entries;
+static unsigned long alloc_min;
+static unsigned long next_base;
+static unsigned long space_left;
 
 /*
  * First time an entry is used, its base and size are set.
  * An entry can be freed and re-malloc'd but its base & size don't change.
  * Should be smart enough for needs of bootwrapper.
  */
-static void *simple_malloc(u32 size)
+static void *simple_malloc(unsigned long size)
 {
-	u32 i;
+	unsigned long i;
 	struct alloc_info *p = alloc_tbl;
 
 	if (size == 0)
@@ -67,13 +67,14 @@ err_out:
 
 static struct alloc_info *simple_find_entry(void *ptr)
 {
-	u32 i;
+	unsigned long i;
 	struct alloc_info *p = alloc_tbl;
 
 	for (i=0; i<tbl_entries; i++,p++) {
 		if (!(p->flags & ENTRY_BEEN_USED))
 			break;
-		if ((p->flags & ENTRY_IN_USE) && (p->base == (u32)ptr))
+		if ((p->flags & ENTRY_IN_USE) &&
+		    (p->base == (unsigned long)ptr))
 			return p;
 	}
 	return NULL;
@@ -122,10 +123,10 @@ static void *simple_realloc(void *ptr, unsigned long size)
  * Returns addr of first byte after heap so caller can see if it took
  * too much space.  If so, change args & try again.
  */
-void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
-		u32 max_allocs)
+void *simple_alloc_init(char *base, unsigned long heap_size,
+			unsigned long granularity, unsigned long max_allocs)
 {
-	u32 heap_base, tbl_size;
+	unsigned long heap_base, tbl_size;
 
 	heap_size = _ALIGN_UP(heap_size, granularity);
 	alloc_min = granularity;
@@ -136,7 +137,7 @@ void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
 	alloc_tbl = (struct alloc_info *)_ALIGN_UP((unsigned long)base, 8);
 	memset(alloc_tbl, 0, tbl_size);
 
-	heap_base = _ALIGN_UP((u32)alloc_tbl + tbl_size, alloc_min);
+	heap_base = _ALIGN_UP((unsigned long)alloc_tbl + tbl_size, alloc_min);
 
 	next_base = heap_base;
 	space_left = heap_size;
diff --git a/arch/powerpc/boot/stdio.h b/arch/powerpc/boot/stdio.h
index 73b8a91bfb34..adffc58412d4 100644
--- a/arch/powerpc/boot/stdio.h
+++ b/arch/powerpc/boot/stdio.h
@@ -7,11 +7,12 @@
 #define	EINVAL		22	/* Invalid argument */
 #define ENOSPC		28	/* No space left on device */
 
-extern int printf(const char *fmt, ...);
+extern int printf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
 
 #define fprintf(fmt, args...)	printf(args)
 
-extern int sprintf(char *buf, const char *fmt, ...);
+extern int sprintf(char *buf, const char *fmt, ...)
+	__attribute__((format(printf, 2, 3)));
 
 extern int vsprintf(char *buf, const char *fmt, va_list args);
 
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 024e4d425c59..5cedd901201f 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -29,6 +29,7 @@ initrd=
 dtb=
 dts=
 cacheit=
+gzip=.gz
 
 # cross-compilation prefix
 CROSS=
@@ -42,7 +43,7 @@ tmpdir=.
 usage() {
     echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
     echo '       [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
-    echo '       [-D datadir] [-W workingdir] [vmlinux]' >&2
+    echo '       [-D datadir] [-W workingdir] [--no-gzip] [vmlinux]' >&2
     exit 1
 }
 
@@ -91,6 +92,9 @@ while [ "$#" -gt 0 ]; do
 	[ "$#" -gt 0 ] || usage
 	tmpdir="$1"
 	;;
+    --no-gzip)
+        gzip=
+        ;;
     -?)
 	usage
 	;;
@@ -137,31 +141,44 @@ miboot|uboot)
     ksection=image
     isection=initrd
     ;;
+cuboot*)
+    gzip=
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
-if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then
+if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
     ${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
-    gzip -f -9 "$vmz.$$"
+
+    if [ -n "$gzip" ]; then
+        gzip -f -9 "$vmz.$$"
+    fi
+
     if [ -n "$cacheit" ]; then
-	mv -f "$vmz.$$.gz" "$vmz.gz"
+	mv -f "$vmz.$$$gzip" "$vmz$gzip"
     else
 	vmz="$vmz.$$"
     fi
 fi
 
+vmz="$vmz$gzip"
+
 case "$platform" in
-uboot)
-    rm -f "$ofile"
+uboot|cuboot*)
     version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
 	cut -d' ' -f3`
     if [ -n "$version" ]; then
 	version="-n Linux-$version"
     fi
+esac
+
+case "$platform" in
+uboot)
+    rm -f "$ofile"
     mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
-	$version -d "$vmz.gz" "$ofile"
+	$version -d "$vmz" "$ofile"
     if [ -z "$cacheit" ]; then
-	rm -f $vmz.gz
+	rm -f "$vmz"
     fi
     exit 0
     ;;
@@ -173,9 +190,9 @@ addsec() {
 	--set-section-flags=$3=contents,alloc,load,readonly,data
 }
 
-addsec $tmp "$vmz.gz" $ksection $object/empty.o
+addsec $tmp "$vmz" $ksection $object/empty.o
 if [ -z "$cacheit" ]; then
-    rm -f "$vmz.gz"
+    rm -f "$vmz"
 fi
 
 if [ -n "$initrd" ]; then
@@ -191,7 +208,7 @@ fi
 
 if [ "$platform" != "miboot" ]; then
     ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
-	$object/crt0.o $platformo $tmp $object/wrapper.a
+	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
 
@@ -201,7 +218,19 @@ pseries|chrp)
     $object/addnote "$ofile"
     ;;
 pmaccoff)
-    ${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile"
+    entry=`objdump -f "$ofile" | grep '^start address ' | \
+	cut -d' ' -f3`
+    ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
     $object/hack-coff "$ofile"
     ;;
+cuboot*)
+    base=`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
+    entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | \
+           cut -d' ' -f3`
+    mv "$ofile" "$ofile".elf
+    ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
+    gzip -f -9 "$ofile".bin
+    mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
+            $version -d "$ofile".bin.gz "$ofile"
+    ;;
 esac
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index a360905e5428..fe87a90ce7f1 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -1,5 +1,6 @@
 OUTPUT_ARCH(powerpc:common)
-ENTRY(_start)
+ENTRY(_zimage_start_opd)
+EXTERN(_zimage_start_opd)
 SECTIONS
 {
   . = (5*1024*1024);
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index 4be3c6414b04..f6e380fdb388 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -1,5 +1,6 @@
 OUTPUT_ARCH(powerpc:common)
 ENTRY(_zimage_start)
+EXTERN(_zimage_start)
 SECTIONS
 {
   . = (4*1024*1024);
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index e956548da00c..6061e5f7696e 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:12:56 2007
+# Linux kernel version: 2.6.21-rc6
+# Mon Apr 23 20:46:48 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -61,6 +61,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -71,6 +72,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -133,20 +135,44 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
+CONFIG_PPC_CELLEB=y
+CONFIG_PPC_PS3=y
+
+#
+# PS3 Platform Options
+#
+# CONFIG_PS3_ADVANCED is not set
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_SYS_MANAGER=y
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_PPC_PS3=y
+
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
+CONFIG_CBE_RAS=y
+CONFIG_CBE_THERM=m
+CONFIG_CBE_CPUFREQ=m
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
+CONFIG_PPC_UDBG_BEAT=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=y
+CONFIG_PPC_PMI=m
 CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
@@ -169,23 +195,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 CONFIG_MPIC=y
 
 #
-# Cell Broadband Engine options
-#
-CONFIG_SPU_FS=m
-CONFIG_SPU_BASE=y
-CONFIG_CBE_RAS=y
-CONFIG_CBE_THERM=m
-CONFIG_CBE_CPUFREQ=m
-
-#
-# PS3 Platform Options
-#
-CONFIG_PS3_HTAB_SIZE=20
-# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_USE_LPAR_ADDR=y
-CONFIG_PS3_VUART=y
-
-#
 # Kernel options
 #
 # CONFIG_HZ_100 is not set
@@ -225,6 +234,7 @@ CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_PPC_64K_PAGES=y
@@ -238,6 +248,7 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -273,6 +284,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -339,6 +351,7 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
@@ -375,7 +388,6 @@ CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -443,6 +455,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -463,6 +476,7 @@ CONFIG_FW_LOADER=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -482,7 +496,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -521,7 +534,6 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_IDEDMA_ONLYDISK is not set
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
@@ -536,6 +548,7 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -546,17 +559,18 @@ CONFIG_BLK_DEV_SIIMAGE=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_CELLEB=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
+CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -564,12 +578,12 @@ CONFIG_SCSI_PROC_FS=y
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
 
 #
@@ -586,7 +600,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
@@ -616,6 +630,7 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
@@ -628,7 +643,60 @@ CONFIG_CHR_DEV_SG=m
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
 #
-# CONFIG_ATA is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+CONFIG_SATA_PROMISE=y
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+CONFIG_PATA_PDC2027X=m
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_SCC is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -654,10 +722,12 @@ CONFIG_DM_MULTIPATH=m
 #
 # Fusion MPT device support
 #
-# CONFIG_FUSION is not set
+CONFIG_FUSION=y
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -731,15 +801,18 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=y
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_PASEMI_MAC is not set
 
 #
 # Token Ring devices
@@ -852,16 +925,27 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_TXX9=y
+CONFIG_HAS_TXX9_SERIAL=y
+CONFIG_SERIAL_TXX9_NR_UARTS=2
+CONFIG_SERIAL_TXX9_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_HVC_DRIVER=y
 CONFIG_HVC_RTAS=y
+CONFIG_HVC_BEAT=y
 
 #
 # IPMI
 #
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_IPMI_HANDLER=m
+# CONFIG_IPMI_PANIC_EVENT is not set
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_IPMI_WATCHDOG=m
+CONFIG_IPMI_POWEROFF=m
 
 #
 # Watchdog Cards
@@ -873,7 +957,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -928,6 +1012,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIS5595 is not set
@@ -972,6 +1057,11 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_HWMON_VID is not set
 
 #
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -985,7 +1075,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 
@@ -994,7 +1084,6 @@ CONFIG_FIRMWARE_EDID=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1005,6 +1094,7 @@ CONFIG_DUMMY_CONSOLE=y
 # HID Devices
 #
 CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -1019,9 +1109,7 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1031,9 +1119,15 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1087,6 +1181,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1124,6 +1219,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1134,6 +1230,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1174,6 +1271,7 @@ CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 # CONFIG_INFINIBAND_AMSO1100 is not set
 CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 # CONFIG_INFINIBAND_SRP is not set
@@ -1202,6 +1300,10 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
 # Virtualization
 #
 
@@ -1378,6 +1480,8 @@ CONFIG_NLS_ISO8859_15=m
 # Distributed Lock Manager
 #
 # CONFIG_DLM is not set
+# CONFIG_UCC_SLOW is not set
+# CONFIG_UCC_FAST is not set
 
 #
 # Library routines
@@ -1394,7 +1498,8 @@ CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 
 #
 # Instrumentation Support
@@ -1413,15 +1518,16 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1431,8 +1537,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
@@ -1468,8 +1576,10 @@ CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1483,6 +1593,7 @@ CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 7724847f702a..3ccf19d8da38 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -143,7 +143,7 @@ CONFIG_PPC_NATIVE=y
 CONFIG_U3_DART=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_MPIC_BROKEN_U3=y
+CONFIG_MPIC_U3_HT_IRQS=y
 # CONFIG_PPC_MPC106 is not set
 CONFIG_PPC_970_NAP=y
 # CONFIG_PPC_INDIRECT_IO is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index de97f2f0ae96..15366f0e489f 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -146,7 +146,7 @@ CONFIG_PPC_RTAS=y
 CONFIG_RTAS_PROC=y
 # CONFIG_RTAS_FLASH is not set
 # CONFIG_MMIO_NVRAM is not set
-CONFIG_MPIC_BROKEN_U3=y
+CONFIG_MPIC_U3_HT_IRQS=y
 # CONFIG_PPC_MPC106 is not set
 CONFIG_PPC_970_NAP=y
 # CONFIG_PPC_INDIRECT_IO is not set
diff --git a/arch/powerpc/configs/mpc832xemds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig
index e1b36de6b38c..e1b36de6b38c 100644
--- a/arch/powerpc/configs/mpc832xemds_defconfig
+++ b/arch/powerpc/configs/mpc832x_mds_defconfig
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/powerpc/configs/mpc832x_rdb_defconfig
index 5bc3248e50e4..56fc0a824458 100644
--- a/arch/mips/configs/pnx8550-v2pci_defconfig
+++ b/arch/powerpc/configs/mpc832x_rdb_defconfig
@@ -1,153 +1,51 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc2
-# Sat Oct 14 23:12:15 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_PNX8550_V2PCI=y
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
+# Linux kernel version: 2.6.21-rc3
+# Mon Mar 12 17:32:19 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_PNX8550=y
-CONFIG_SOC_PNX8550=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_6xx=y
+CONFIG_83xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_SMP is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -165,28 +63,29 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
+# CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -199,10 +98,11 @@ CONFIG_BASE_SMALL=0
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+# CONFIG_KMOD is not set
 
 #
 # Block layer
@@ -224,14 +124,68 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_QUICC_ENGINE=y
+CONFIG_PPC_GEN550=y
+# CONFIG_WANT_EARLY_SERIAL is not set
 
 #
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+# Platform support
 #
-CONFIG_HW_HAS_PCI=y
+# CONFIG_MPC8313_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+CONFIG_MPC832x_RDB=y
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+CONFIG_PPC_MPC832x=y
+# CONFIG_MPIC is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
 CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-CONFIG_MMU=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -244,11 +198,18 @@ CONFIG_MMU=y
 # CONFIG_HOTPLUG_PCI is not set
 
 #
-# Executable file formats
+# Advanced setup
 #
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -265,19 +226,21 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
+CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
@@ -291,73 +254,12 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_SUBTREES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_NETFILTER is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -389,7 +291,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -409,7 +310,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -430,10 +331,12 @@ CONFIG_FW_LOADER=y
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -446,78 +349,29 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -536,30 +390,26 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
 #
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
 #
-CONFIG_ISCSI_TCP=m
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
@@ -569,8 +419,11 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
@@ -584,6 +437,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -614,13 +468,19 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_I2O is not set
 
 #
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
 # Network device support
 #
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
+# CONFIG_TUN is not set
 
 #
 # ARCnet devices
@@ -641,44 +501,22 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
 
 #
 # Tulip family network device support
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
 #
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -687,18 +525,26 @@ CONFIG_8139TOO=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+CONFIG_UGETH_NAPI=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMOND is not set
 # CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -716,17 +562,8 @@ CONFIG_8139TOO=y
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
@@ -752,29 +589,17 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
@@ -782,48 +607,33 @@ CONFIG_MOUSE_PS2=y
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -836,17 +646,33 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -854,18 +680,17 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
 #
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
 
 #
 # I2C Algorithms
 #
-CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOBIT is not set
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
@@ -880,9 +705,11 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIS5595 is not set
@@ -903,6 +730,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_M41T00 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -918,6 +746,7 @@ CONFIG_I2C_ALGOBIT=m
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -928,6 +757,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -951,6 +781,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -961,15 +792,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
@@ -985,50 +817,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Sound
@@ -1036,6 +827,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1048,16 +845,26 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
-# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
@@ -1078,25 +885,25 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
 # CONFIG_USB_ACECAD is not set
@@ -1109,7 +916,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1124,6 +931,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1146,6 +954,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1153,7 +962,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1211,6 +1023,14 @@ CONFIG_USB_MON=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1227,11 +1047,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1240,8 +1056,8 @@ CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
@@ -1264,7 +1080,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
@@ -1283,7 +1099,7 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -1296,21 +1112,18 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
+# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1320,15 +1133,31 @@ CONFIG_SMB_FS=m
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
 #
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1345,14 +1174,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_869 is not set
 # CONFIG_NLS_CODEPAGE_936 is not set
 # CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
+CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_ISO8859_8=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -1368,24 +1197,49 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# QE Options
+#
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+
+#
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
 
 #
 # Kernel hacking
 #
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options
@@ -1397,21 +1251,26 @@ CONFIG_CMDLINE=""
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1419,29 +1278,15 @@ CONFIG_CRYPTO_CBC=m
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
 # CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig
index bbe38ccc3d86..8eb475cd0df0 100644
--- a/arch/powerpc/configs/mpc8360emds_defconfig
+++ b/arch/powerpc/configs/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:45 2007
+# Linux kernel version: 2.6.20
+# Sat Feb 17 10:09:26 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_8xx is not set
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_83xx=y
@@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -129,10 +130,11 @@ CONFIG_PPC_GEN550=y
 #
 # Platform support
 #
+# CONFIG_MPC8313_RDB is not set
 # CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC834x_SYS is not set
+# CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
-CONFIG_MPC8360E_PB=y
+CONFIG_MPC836x_MDS=y
 CONFIG_PPC_MPC836x=y
 # CONFIG_MPIC is not set
 
@@ -162,6 +164,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -171,6 +174,7 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -219,6 +223,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -528,6 +533,7 @@ CONFIG_UCC_GETH=y
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
@@ -620,6 +626,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -690,6 +697,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIS5595 is not set
@@ -804,6 +812,7 @@ CONFIG_FIRMWARE_EDID=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -868,6 +877,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
 # Virtualization
 #
 
@@ -1011,7 +1024,8 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 
 #
 # Instrumentation Support
@@ -1060,8 +1074,10 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1075,6 +1091,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
new file mode 100644
index 000000000000..b563513cc96c
--- /dev/null
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -0,0 +1,1077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc3
+# Mon Mar 19 17:18:49 2007
+#
+# CONFIG_PPC64 is not set
+CONFIG_PPC32=y
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+
+#
+# Processor support
+#
+# CONFIG_CLASSIC32 is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_85xx=y
+CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
+# CONFIG_SPE is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_IPC_NS=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Platform support
+#
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8544_DS=y
+CONFIG_MPC85xx=y
+CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="root=/dev/sda3 rw console=ttyS0,115200"
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+CONFIG_FIB_RULES=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_PATA_PLATFORM is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+CONFIG_DVB=y
+CONFIG_DVB_CORE=m
+# CONFIG_DVB_CORE_ATTACH is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+
+#
+# DVB-T (terrestrial) frontends
+#
+
+#
+# DVB-C (cable) frontends
+#
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+
+#
+# Tuners/PLL support
+#
+
+#
+# Miscellaneous devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+
+#
+# Instrumentation Support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
index 058e06d88bc1..7b3800674cbf 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Wed Feb  7 23:54:25 2007
+# Linux kernel version: 2.6.20
+# Sat Feb 17 16:26:53 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_8xx is not set
 # CONFIG_E200 is not set
 CONFIG_85xx=y
 CONFIG_E500=y
@@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -130,7 +131,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC8568_MDS=y
+CONFIG_MPC85xx_MDS=y
 CONFIG_MPC85xx=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
 CONFIG_MPIC=y
@@ -162,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -171,6 +173,7 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+CONFIG_ZONE_DMA=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
@@ -216,6 +219,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -301,6 +305,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -341,7 +346,6 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -543,6 +547,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,6 +703,7 @@ CONFIG_FIRMWARE_EDID=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -760,6 +766,10 @@ CONFIG_HID=y
 #
 
 #
+# Auxiliary Display support
+#
+
+#
 # Virtualization
 #
 
@@ -896,7 +906,8 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 
 #
 # Instrumentation Support
@@ -914,6 +925,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
@@ -922,7 +934,6 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -932,6 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
 # CONFIG_BDI_SWITCH is not set
@@ -943,6 +956,8 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
 # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
 # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
 
 #
 # Security options
@@ -970,8 +985,10 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -985,6 +1002,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 
 #
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index debac66e8258..126b9f87df25 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -152,7 +152,7 @@ CONFIG_RTAS_ERROR_LOGGING=y
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 CONFIG_MMIO_NVRAM=y
-CONFIG_MPIC_BROKEN_U3=y
+CONFIG_MPIC_U3_HT_IRQS=y
 CONFIG_IBMVIO=y
 # CONFIG_IBMEBUS is not set
 # CONFIG_PPC_MPC106 is not set
@@ -500,7 +500,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -646,7 +646,7 @@ CONFIG_SATA_SVW=y
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_WINBOND=y
 
 #
 # Multi-device support (RAID and LVM)
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1c794fe718fd..6e96e50c362d 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -483,7 +483,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -628,7 +628,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_WINBOND=y
 
 #
 # Multi-device support (RAID and LVM)
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 8120d428ebfd..e0fa80eca366 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -25,8 +25,8 @@ obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o of_platform.o prom_parse.o
 procfs-$(CONFIG_PPC64)		:= proc_ppc64.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
-rtaspci-$(CONFIG_PPC64)		:= rtas_pci.o
-obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y)
+rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)	:= rtas_pci.o
+obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y-y)
 obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
 obj-$(CONFIG_LPARCFG)		+= lparcfg.o
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 4734b5de599d..5c9ff7f5c44e 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -241,7 +241,7 @@ static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr)
 	if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size))
 		return -EFAULT;
 	for (i = 0; i < size / sizeof(long); ++i)
-		if (__put_user(0, p+i))
+		if (__put_user_inatomic(0, p+i))
 			return -EFAULT;
 	return 1;
 }
@@ -288,7 +288,8 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 		} else {
 			unsigned long pc = regs->nip ^ (swiz & 4);
 
-			if (__get_user(instr, (unsigned int __user *)pc))
+			if (__get_user_inatomic(instr,
+						(unsigned int __user *)pc))
 				return -EFAULT;
 			if (swiz == 0 && (flags & SW))
 				instr = cpu_to_le32(instr);
@@ -324,27 +325,31 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
 			       ((nb0 + 3) / 4) * sizeof(unsigned long));
 
 		for (i = 0; i < nb; ++i, ++p)
-			if (__get_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
+			if (__get_user_inatomic(REG_BYTE(rptr, i ^ bswiz),
+						SWIZ_PTR(p)))
 				return -EFAULT;
 		if (nb0 > 0) {
 			rptr = &regs->gpr[0];
 			addr += nb;
 			for (i = 0; i < nb0; ++i, ++p)
-				if (__get_user(REG_BYTE(rptr, i ^ bswiz),
-					       SWIZ_PTR(p)))
+				if (__get_user_inatomic(REG_BYTE(rptr,
+								 i ^ bswiz),
+							SWIZ_PTR(p)))
 					return -EFAULT;
 		}
 
 	} else {
 		for (i = 0; i < nb; ++i, ++p)
-			if (__put_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p)))
+			if (__put_user_inatomic(REG_BYTE(rptr, i ^ bswiz),
+						SWIZ_PTR(p)))
 				return -EFAULT;
 		if (nb0 > 0) {
 			rptr = &regs->gpr[0];
 			addr += nb;
 			for (i = 0; i < nb0; ++i, ++p)
-				if (__put_user(REG_BYTE(rptr, i ^ bswiz),
-					       SWIZ_PTR(p)))
+				if (__put_user_inatomic(REG_BYTE(rptr,
+								 i ^ bswiz),
+							SWIZ_PTR(p)))
 					return -EFAULT;
 		}
 	}
@@ -398,7 +403,8 @@ int fix_alignment(struct pt_regs *regs)
 
 		if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE))
 			pc ^= 4;
-		if (unlikely(__get_user(instr, (unsigned int __user *)pc)))
+		if (unlikely(__get_user_inatomic(instr,
+						 (unsigned int __user *)pc)))
 			return -EFAULT;
 		if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
 			instr = cpu_to_le32(instr);
@@ -474,16 +480,16 @@ int fix_alignment(struct pt_regs *regs)
 		p = (unsigned long) addr;
 		switch (nb) {
 		case 8:
-			ret |= __get_user(data.v[0], SWIZ_PTR(p++));
-			ret |= __get_user(data.v[1], SWIZ_PTR(p++));
-			ret |= __get_user(data.v[2], SWIZ_PTR(p++));
-			ret |= __get_user(data.v[3], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[0], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[1], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[2], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[3], SWIZ_PTR(p++));
 		case 4:
-			ret |= __get_user(data.v[4], SWIZ_PTR(p++));
-			ret |= __get_user(data.v[5], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[4], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[5], SWIZ_PTR(p++));
 		case 2:
-			ret |= __get_user(data.v[6], SWIZ_PTR(p++));
-			ret |= __get_user(data.v[7], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[6], SWIZ_PTR(p++));
+			ret |= __get_user_inatomic(data.v[7], SWIZ_PTR(p++));
 			if (unlikely(ret))
 				return -EFAULT;
 		}
@@ -551,16 +557,16 @@ int fix_alignment(struct pt_regs *regs)
 		p = (unsigned long) addr;
 		switch (nb) {
 		case 8:
-			ret |= __put_user(data.v[0], SWIZ_PTR(p++));
-			ret |= __put_user(data.v[1], SWIZ_PTR(p++));
-			ret |= __put_user(data.v[2], SWIZ_PTR(p++));
-			ret |= __put_user(data.v[3], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[0], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[1], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[2], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[3], SWIZ_PTR(p++));
 		case 4:
-			ret |= __put_user(data.v[4], SWIZ_PTR(p++));
-			ret |= __put_user(data.v[5], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[4], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[5], SWIZ_PTR(p++));
 		case 2:
-			ret |= __put_user(data.v[6], SWIZ_PTR(p++));
-			ret |= __put_user(data.v[7], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[6], SWIZ_PTR(p++));
+			ret |= __put_user_inatomic(data.v[7], SWIZ_PTR(p++));
 		}
 		if (unlikely(ret))
 			return -EFAULT;
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 030d300cd71c..0c5150c69175 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -77,7 +77,6 @@ int main(void)
 	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
 #else /* CONFIG_PPC64 */
 	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
-	DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall));
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
 	DEFINE(PT_PTRACED, PT_PTRACED);
@@ -140,6 +139,7 @@ int main(void)
 	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
 	DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr));
 	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
+	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 
 	DEFINE(SLBSHADOW_STACKVSID,
 	       offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid));
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 3678997339d6..e7b684689e04 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -161,33 +161,33 @@ int btext_initialize(struct device_node *np)
 	unsigned long address = 0;
 	const u32 *prop;
 
-	prop = get_property(np, "linux,bootx-width", NULL);
+	prop = of_get_property(np, "linux,bootx-width", NULL);
 	if (prop == NULL)
-		prop = get_property(np, "width", NULL);
+		prop = of_get_property(np, "width", NULL);
 	if (prop == NULL)
 		return -EINVAL;
 	width = *prop;
-	prop = get_property(np, "linux,bootx-height", NULL);
+	prop = of_get_property(np, "linux,bootx-height", NULL);
 	if (prop == NULL)
-		prop = get_property(np, "height", NULL);
+		prop = of_get_property(np, "height", NULL);
 	if (prop == NULL)
 		return -EINVAL;
 	height = *prop;
-	prop = get_property(np, "linux,bootx-depth", NULL);
+	prop = of_get_property(np, "linux,bootx-depth", NULL);
 	if (prop == NULL)
-		prop = get_property(np, "depth", NULL);
+		prop = of_get_property(np, "depth", NULL);
 	if (prop == NULL)
 		return -EINVAL;
 	depth = *prop;
 	pitch = width * ((depth + 7) / 8);
-	prop = get_property(np, "linux,bootx-linebytes", NULL);
+	prop = of_get_property(np, "linux,bootx-linebytes", NULL);
 	if (prop == NULL)
-		prop = get_property(np, "linebytes", NULL);
+		prop = of_get_property(np, "linebytes", NULL);
 	if (prop && *prop != 0xffffffffu)
 		pitch = *prop;
 	if (pitch == 1)
 		pitch = 0x1000;
-	prop = get_property(np, "address", NULL);
+	prop = of_get_property(np, "address", NULL);
 	if (prop)
 		address = *prop;
 
@@ -219,7 +219,7 @@ int __init btext_find_display(int allow_nonstdout)
 	struct device_node *np = NULL; 
 	int rc = -ENODEV;
 
-	name = get_property(of_chosen, "linux,stdout-path", NULL);
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
 	if (name != NULL) {
 		np = of_find_node_by_path(name);
 		if (np != NULL) {
@@ -236,7 +236,7 @@ int __init btext_find_display(int allow_nonstdout)
 		return rc;
 
 	for (np = NULL; (np = of_find_node_by_type(np, "display"));) {
-		if (get_property(np, "linux,opened", NULL)) {
+		if (of_get_property(np, "linux,opened", NULL)) {
 			printk("trying %s ...\n", np->full_name);
 			rc = btext_initialize(np);
 			printk("result: %d\n", rc);
diff --git a/arch/powerpc/kernel/cpu_setup_pa6t.S b/arch/powerpc/kernel/cpu_setup_pa6t.S
index 4047be25c4d2..d62cb9cae4e9 100644
--- a/arch/powerpc/kernel/cpu_setup_pa6t.S
+++ b/arch/powerpc/kernel/cpu_setup_pa6t.S
@@ -34,7 +34,7 @@ _GLOBAL(__setup_cpu_pa6t)
 	beqlr
 
 	mfspr	r0,SPRN_HID5
-	ori	r0,r0,0x30
+	ori	r0,r0,0x38
 	mtspr	SPRN_HID5,r0
 
 	mfspr	r0,SPRN_LPCR
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 7ec4ac77c0fa..9cb24d20f0f9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -225,6 +225,22 @@ static struct cpu_spec cpu_specs[] = {
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "ppc970",
 	},
+	{	/* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x00440100,
+		.cpu_name		= "PPC970MP",
+		.cpu_features		= CPU_FTRS_PPC970,
+		.cpu_user_features	= COMMON_USER_POWER4 |
+			PPC_FEATURE_HAS_ALTIVEC_COMP,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 8,
+		.cpu_setup		= __setup_cpu_ppc970,
+		.cpu_restore		= __restore_cpu_ppc970,
+		.oprofile_cpu_type	= "ppc64/970MP",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.platform		= "ppc970",
+	},
 	{	/* PPC970MP */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00440000,
@@ -373,6 +389,8 @@ static struct cpu_spec cpu_specs[] = {
 		.pmc_type		= PPC_PMC_PA6T,
 		.cpu_setup		= __setup_cpu_pa6t,
 		.cpu_restore		= __restore_cpu_pa6t,
+		.oprofile_cpu_type	= "ppc64/pa6t",
+		.oprofile_type		= PPC_OPROFILE_PA6T,
 		.platform		= "pa6t",
 	},
 	{	/* default match */
@@ -542,6 +560,18 @@ static struct cpu_spec cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_750cx,
 		.platform		= "ppc750",
 	},
+	{	/* 750CL */
+		.pvr_mask		= 0xfffff0f0,
+		.pvr_value		= 0x00087010,
+		.cpu_name		= "750CL",
+		.cpu_features		= CPU_FTRS_750CL,
+		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.num_pmcs		= 4,
+		.cpu_setup		= __setup_cpu_750,
+		.platform		= "ppc750",
+	},
 	{	/* 745/755 */
 		.pvr_mask		= 0xfffff000,
 		.pvr_value		= 0x00083000,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index c03e829fee3c..c29d1652a421 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,7 +191,6 @@ stack_ovf:
 0:
 
 _GLOBAL(DoSyscall)
-	stw	r0,THREAD+LAST_SYSCALL(r2)
 	stw	r3,ORIG_GPR3(r1)
 	li	r12,0
 	stw	r12,RESULT(r1)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 97cedcd6c9b4..1111fcec7673 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -278,8 +278,12 @@ exception_marker:
 	beq-	1f;							   \
 	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
 1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,bad_stack;		/* abort if it is		*/ \
-	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
+	bge-	cr1,2f;			/* abort if it is		*/ \
+	b	3f;							   \
+2:	li	r1,(n);			/* will be reloaded later	*/ \
+	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	b	bad_stack;						   \
+3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
 	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
 	std	r10,0(r1);		/* make stack chain pointer	*/ \
@@ -940,6 +944,8 @@ bad_stack:
 	SAVE_2GPRS(7,r1)
 	SAVE_10GPRS(12,r1)
 	SAVE_10GPRS(22,r1)
+	lhz	r12,PACA_TRAP_SAVE(r13)
+	std	r12,_TRAP(r1)
 	addi	r11,r1,INT_FRAME_SIZE
 	std	r11,0(r1)
 	li	r12,0
@@ -1555,7 +1561,6 @@ _GLOBAL(generic_secondary_smp_init)
 	
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
-	isync
 
 	/* Set up a paca value for this processor. Since we have the
 	 * physical cpu id in r24, we need to search the pacas to find
@@ -1735,10 +1740,6 @@ _STATIC(__boot_from_prom)
 	/* We never return */
 	trap
 
-/*
- * At this point, r3 contains the physical address we are running at,
- * returned by prom_init()
- */
 _STATIC(__after_prom_start)
 
 /*
@@ -1851,7 +1852,6 @@ __secondary_start_pmac_0:
 _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
-	isync
 
 	/* Copy some CPU settings from CPU 0 */
 	bl	.__restore_cpu_ppc970
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 82bd2f10770f..9a8c9af43b22 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -2,36 +2,37 @@
  * IBM PowerPC IBM eBus Infrastructure Support.
  *
  * Copyright (c) 2005 IBM Corporation
+ *  Joachim Fenkes <fenkes@de.ibm.com>
  *  Heiko J Schick <schickhj@de.ibm.com>
- *    
+ *
  * All rights reserved.
  *
- * This source code is distributed under a dual license of GPL v2.0 and OpenIB 
- * BSD. 
+ * This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ * BSD.
  *
  * OpenIB BSD License
  *
- * Redistribution and use in source and binary forms, with or without 
- * modification, are permitted provided that the following conditions are met: 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
  *
- * Redistributions of source code must retain the above copyright notice, this 
- * list of conditions and the following disclaimer. 
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
  *
- * Redistributions in binary form must reproduce the above copyright notice, 
- * this list of conditions and the following disclaimer in the documentation 
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
  * and/or other materials
- * provided with the distribution. 
+ * provided with the distribution.
  *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
- * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
@@ -43,19 +44,19 @@
 #include <asm/ibmebus.h>
 #include <asm/abs_addr.h>
 
-static struct ibmebus_dev ibmebus_bus_device = { /* fake "parent" device */
-	.name = ibmebus_bus_device.ofdev.dev.bus_id,
-	.ofdev.dev.bus_id = "ibmebus",
-	.ofdev.dev.bus    = &ibmebus_bus_type,
+static struct device ibmebus_bus_device = { /* fake "parent" device */
+	.bus_id = "ibmebus",
 };
 
+struct bus_type ibmebus_bus_type;
+
 static void *ibmebus_alloc_coherent(struct device *dev,
 				    size_t size,
 				    dma_addr_t *dma_handle,
 				    gfp_t flag)
 {
 	void *mem;
-	
+
 	mem = kmalloc(size, flag);
 	*dma_handle = (dma_addr_t)mem;
 
@@ -63,7 +64,7 @@ static void *ibmebus_alloc_coherent(struct device *dev,
 }
 
 static void ibmebus_free_coherent(struct device *dev,
-				  size_t size, void *vaddr, 
+				  size_t size, void *vaddr,
 				  dma_addr_t dma_handle)
 {
 	kfree(vaddr);
@@ -79,7 +80,7 @@ static dma_addr_t ibmebus_map_single(struct device *dev,
 
 static void ibmebus_unmap_single(struct device *dev,
 				 dma_addr_t dma_addr,
-				 size_t size, 
+				 size_t size,
 				 enum dma_data_direction direction)
 {
 	return;
@@ -90,13 +91,13 @@ static int ibmebus_map_sg(struct device *dev,
 			  int nents, enum dma_data_direction direction)
 {
 	int i;
-	
+
 	for (i = 0; i < nents; i++) {
-		sg[i].dma_address = (dma_addr_t)page_address(sg[i].page) 
+		sg[i].dma_address = (dma_addr_t)page_address(sg[i].page)
 			+ sg[i].offset;
 		sg[i].dma_length = sg[i].length;
 	}
-	
+
 	return nents;
 }
 
@@ -128,15 +129,15 @@ static int ibmebus_bus_probe(struct device *dev)
 	struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver);
 	const struct of_device_id *id;
 	int error = -ENODEV;
-	
+
 	if (!ibmebusdrv->probe)
 		return error;
-	
+
 	id = of_match_device(ibmebusdrv->id_table, &ibmebusdev->ofdev);
 	if (id) {
 		error = ibmebusdrv->probe(ibmebusdev, id);
 	}
-	
+
 	return error;
 }
 
@@ -144,11 +145,11 @@ static int ibmebus_bus_remove(struct device *dev)
 {
 	struct ibmebus_dev *ibmebusdev    = to_ibmebus_dev(dev);
 	struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver);
-	
+
 	if (ibmebusdrv->remove) {
 		return ibmebusdrv->remove(ibmebusdev);
 	}
-	
+
 	return 0;
 }
 
@@ -158,21 +159,12 @@ static void __devinit ibmebus_dev_release(struct device *dev)
 	kfree(to_ibmebus_dev(dev));
 }
 
-static ssize_t ibmebusdev_show_name(struct device *dev, 
-				    struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "%s\n", to_ibmebus_dev(dev)->name);
-}
-static DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, ibmebusdev_show_name, 
-		   NULL);
-
-static struct ibmebus_dev* __devinit ibmebus_register_device_common(
+static int __devinit ibmebus_register_device_common(
 	struct ibmebus_dev *dev, const char *name)
 {
 	int err = 0;
 
-	dev->name = name;
-	dev->ofdev.dev.parent  = &ibmebus_bus_device.ofdev.dev;
+	dev->ofdev.dev.parent  = &ibmebus_bus_device;
 	dev->ofdev.dev.bus     = &ibmebus_bus_type;
 	dev->ofdev.dev.release = ibmebus_dev_release;
 
@@ -181,17 +173,15 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_common(
 	dev->ofdev.dev.archdata.numa_node = of_node_to_nid(dev->ofdev.node);
 
 	/* An ibmebusdev is based on a of_device. We have to change the
-	 * bus type to use our own DMA mapping operations. 
-	 */       
+	 * bus type to use our own DMA mapping operations.
+	 */
 	if ((err = of_device_register(&dev->ofdev)) != 0) {
 		printk(KERN_ERR "%s: failed to register device (%d).\n",
 		       __FUNCTION__, err);
-		return NULL;
+		return -ENODEV;
 	}
-	
-	device_create_file(&dev->ofdev.dev, &dev_attr_name);
-	
-	return dev;
+
+	return 0;
 }
 
 static struct ibmebus_dev* __devinit ibmebus_register_device_node(
@@ -201,35 +191,35 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node(
 	const char *loc_code;
 	int length;
 
-	loc_code = get_property(dn, "ibm,loc-code", NULL);
+	loc_code = of_get_property(dn, "ibm,loc-code", NULL);
 	if (!loc_code) {
                 printk(KERN_WARNING "%s: node %s missing 'ibm,loc-code'\n",
 		       __FUNCTION__, dn->name ? dn->name : "<unknown>");
-		return NULL;
+		return ERR_PTR(-EINVAL);
         }
-	
+
 	if (strlen(loc_code) == 0) {
 	        printk(KERN_WARNING "%s: 'ibm,loc-code' is invalid\n",
 		       __FUNCTION__);
-		return NULL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	dev = kzalloc(sizeof(struct ibmebus_dev), GFP_KERNEL);
 	if (!dev) {
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	dev->ofdev.node = of_node_get(dn);
-       
+
 	length = strlen(loc_code);
-	memcpy(dev->ofdev.dev.bus_id, loc_code 
-		+ (length - min(length, BUS_ID_SIZE - 1)), 
+	memcpy(dev->ofdev.dev.bus_id, loc_code
+		+ (length - min(length, BUS_ID_SIZE - 1)),
 		min(length, BUS_ID_SIZE - 1));
 
 	/* Register with generic device framework. */
-	if (ibmebus_register_device_common(dev, dn->name) == NULL) {
+	if (ibmebus_register_device_common(dev, dn->name) != 0) {
 		kfree(dev);
-		return NULL;
+		return ERR_PTR(-ENODEV);
 	}
 
 	return dev;
@@ -238,17 +228,16 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node(
 static void ibmebus_probe_of_nodes(char* name)
 {
 	struct device_node *dn = NULL;
-	
+
 	while ((dn = of_find_node_by_name(dn, name))) {
-		if (ibmebus_register_device_node(dn) == NULL) {
+		if (IS_ERR(ibmebus_register_device_node(dn))) {
 			of_node_put(dn);
-			
 			return;
 		}
 	}
-	
+
 	of_node_put(dn);
-	
+
 	return;
 }
 
@@ -262,17 +251,21 @@ static void ibmebus_add_devices_by_id(struct of_device_id *idt)
 	return;
 }
 
-static int ibmebus_match_helper(struct device *dev, void *data)
+static int ibmebus_match_name(struct device *dev, void *data)
 {
-	if (strcmp((char*)data, to_ibmebus_dev(dev)->name) == 0)
+	const struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev);
+	const char *name;
+
+	name = of_get_property(ebus_dev->ofdev.node, "name", NULL);
+
+	if (name && (strcmp(data, name) == 0))
 		return 1;
-	
+
 	return 0;
 }
 
 static int ibmebus_unregister_device(struct device *dev)
 {
-	device_remove_file(dev, &dev_attr_name);
 	of_device_unregister(to_of_device(dev));
 
 	return 0;
@@ -281,17 +274,16 @@ static int ibmebus_unregister_device(struct device *dev)
 static void ibmebus_remove_devices_by_id(struct of_device_id *idt)
 {
 	struct device *dev;
-	
+
 	while (strlen(idt->name) > 0) {
-		while ((dev = bus_find_device(&ibmebus_bus_type, NULL, 
+		while ((dev = bus_find_device(&ibmebus_bus_type, NULL,
 					      (void*)idt->name,
-					      ibmebus_match_helper))) {
+					      ibmebus_match_name))) {
 			ibmebus_unregister_device(dev);
 		}
 		idt++;
-		
 	}
-	
+
 	return;
 }
 
@@ -307,30 +299,33 @@ int ibmebus_register_driver(struct ibmebus_driver *drv)
 	if ((err = driver_register(&drv->driver) != 0))
 		return err;
 
+	/* remove all supported devices first, in case someone
+	 * probed them manually before registering the driver */
+	ibmebus_remove_devices_by_id(drv->id_table);
 	ibmebus_add_devices_by_id(drv->id_table);
-	
+
 	return 0;
 }
 EXPORT_SYMBOL(ibmebus_register_driver);
 
 void ibmebus_unregister_driver(struct ibmebus_driver *drv)
-{	
+{
 	driver_unregister(&drv->driver);
 	ibmebus_remove_devices_by_id(drv->id_table);
 }
 EXPORT_SYMBOL(ibmebus_unregister_driver);
 
 int ibmebus_request_irq(struct ibmebus_dev *dev,
-			u32 ist, 
+			u32 ist,
 			irq_handler_t handler,
 			unsigned long irq_flags, const char * devname,
 			void *dev_id)
 {
 	unsigned int irq = irq_create_mapping(NULL, ist);
-	
+
 	if (irq == NO_IRQ)
 		return -EINVAL;
-	
+
 	return request_irq(irq, handler,
 			   irq_flags, devname, dev_id);
 }
@@ -339,56 +334,163 @@ EXPORT_SYMBOL(ibmebus_request_irq);
 void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id)
 {
 	unsigned int irq = irq_find_mapping(NULL, ist);
-	
+
 	free_irq(irq, dev_id);
 }
 EXPORT_SYMBOL(ibmebus_free_irq);
 
 static int ibmebus_bus_match(struct device *dev, struct device_driver *drv)
-{	
+{
 	const struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev);
 	struct ibmebus_driver *ebus_drv    = to_ibmebus_driver(drv);
 	const struct of_device_id *ids     = ebus_drv->id_table;
 	const struct of_device_id *found_id;
-	
+
 	if (!ids)
 		return 0;
-	
+
 	found_id = of_match_device(ids, &ebus_dev->ofdev);
 	if (found_id)
 		return 1;
-	
+
 	return 0;
 }
 
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev);
+	const char *name = of_get_property(ebus_dev->ofdev.node, "name", NULL);
+	return sprintf(buf, "%s\n", name);
+}
+
+static struct device_attribute ibmebus_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_NULL
+};
+
+static int ibmebus_match_path(struct device *dev, void *data)
+{
+	int rc;
+	struct device_node *dn =
+		of_node_get(to_ibmebus_dev(dev)->ofdev.node);
+
+	rc = (dn->full_name && (strcasecmp((char*)data, dn->full_name) == 0));
+
+	of_node_put(dn);
+	return rc;
+}
+
+static char *ibmebus_chomp(const char *in, size_t count)
+{
+	char *out = (char*)kmalloc(count + 1, GFP_KERNEL);
+	if (!out)
+		return NULL;
+
+	memcpy(out, in, count);
+	out[count] = '\0';
+	if (out[count - 1] == '\n')
+		out[count - 1] = '\0';
+
+	return out;
+}
+
+static ssize_t ibmebus_store_probe(struct bus_type *bus,
+				   const char *buf, size_t count)
+{
+	struct device_node *dn = NULL;
+	struct ibmebus_dev *dev;
+	char *path;
+	ssize_t rc;
+
+	path = ibmebus_chomp(buf, count);
+	if (!path)
+		return -ENOMEM;
+
+	if (bus_find_device(&ibmebus_bus_type, NULL, path,
+			     ibmebus_match_path)) {
+		printk(KERN_WARNING "%s: %s has already been probed\n",
+		       __FUNCTION__, path);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	if ((dn = of_find_node_by_path(path))) {
+		dev = ibmebus_register_device_node(dn);
+		of_node_put(dn);
+		rc = IS_ERR(dev) ? PTR_ERR(dev) : count;
+	} else {
+		printk(KERN_WARNING "%s: no such device node: %s\n",
+		       __FUNCTION__, path);
+		rc = -ENODEV;
+	}
+
+out:
+	kfree(path);
+	return rc;
+}
+
+static ssize_t ibmebus_store_remove(struct bus_type *bus,
+				    const char *buf, size_t count)
+{
+	struct device *dev;
+	char *path;
+
+	path = ibmebus_chomp(buf, count);
+	if (!path)
+		return -ENOMEM;
+
+	if ((dev = bus_find_device(&ibmebus_bus_type, NULL, path,
+				   ibmebus_match_path))) {
+		ibmebus_unregister_device(dev);
+
+		kfree(path);
+		return count;
+	} else {
+		printk(KERN_WARNING "%s: %s not on the bus\n",
+		       __FUNCTION__, path);
+
+		kfree(path);
+		return -ENODEV;
+	}
+}
+
+static struct bus_attribute ibmebus_bus_attrs[] = {
+	__ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe),
+	__ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove),
+	__ATTR_NULL
+};
+
 struct bus_type ibmebus_bus_type = {
-	.name = "ibmebus",
-	.match = ibmebus_bus_match,
+	.name      = "ibmebus",
+	.match     = ibmebus_bus_match,
+	.dev_attrs = ibmebus_dev_attrs,
+	.bus_attrs = ibmebus_bus_attrs
 };
 EXPORT_SYMBOL(ibmebus_bus_type);
 
 static int __init ibmebus_bus_init(void)
 {
 	int err;
-	
+
 	printk(KERN_INFO "IBM eBus Device Driver\n");
-	
+
 	err = bus_register(&ibmebus_bus_type);
 	if (err) {
 		printk(KERN_ERR ":%s: failed to register IBM eBus.\n",
 		       __FUNCTION__);
 		return err;
 	}
-	
-	err = device_register(&ibmebus_bus_device.ofdev.dev);
+
+	err = device_register(&ibmebus_bus_device);
 	if (err) {
-		printk(KERN_WARNING "%s: device_register returned %i\n", 
+		printk(KERN_WARNING "%s: device_register returned %i\n",
 		       __FUNCTION__, err);
 		bus_unregister(&ibmebus_bus_type);
 
 		return err;
 	}
-	
+
 	return 0;
 }
 __initcall(ibmebus_bus_init);
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 95edad4faf26..c08ceca6277d 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -47,6 +47,8 @@ static int novmerge = 0;
 static int novmerge = 1;
 #endif
 
+static int protect4gb = 1;
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
 					    unsigned long slen)
 {
@@ -58,6 +60,16 @@ static inline unsigned long iommu_num_pages(unsigned long vaddr,
 	return npages;
 }
 
+static int __init setup_protect4gb(char *str)
+{
+	if (strcmp(str, "on") == 0)
+		protect4gb = 1;
+	else if (strcmp(str, "off") == 0)
+		protect4gb = 0;
+
+	return 1;
+}
+
 static int __init setup_iommu(char *str)
 {
 	if (!strcmp(str, "novmerge"))
@@ -67,6 +79,7 @@ static int __init setup_iommu(char *str)
 	return 1;
 }
 
+__setup("protect4gb=", setup_protect4gb);
 __setup("iommu=", setup_iommu);
 
 static unsigned long iommu_range_alloc(struct iommu_table *tbl,
@@ -429,6 +442,9 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
 struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 {
 	unsigned long sz;
+	unsigned long start_index, end_index;
+	unsigned long entries_per_4g;
+	unsigned long index;
 	static int welcomed = 0;
 	struct page *page;
 
@@ -450,7 +466,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 
 #ifdef CONFIG_CRASH_DUMP
 	if (ppc_md.tce_get) {
-		unsigned long index, tceval;
+		unsigned long tceval;
 		unsigned long tcecount = 0;
 
 		/*
@@ -480,6 +496,23 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
 	ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size);
 #endif
 
+	/*
+	 * DMA cannot cross 4 GB boundary.  Mark last entry of each 4
+	 * GB chunk as reserved.
+	 */
+	if (protect4gb) {
+		entries_per_4g = 0x100000000l >> IOMMU_PAGE_SHIFT;
+
+		/* Mark the last bit before a 4GB boundary as used */
+		start_index = tbl->it_offset | (entries_per_4g - 1);
+		start_index -= tbl->it_offset;
+
+		end_index = tbl->it_size;
+
+		for (index = start_index; index < end_index - 1; index += entries_per_4g)
+			__set_bit(index, tbl->it_map);
+	}
+
 	if (!welcomed) {
 		printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n",
 		       novmerge ? "disabled" : "enabled");
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 919fbf568495..6c83fe229e60 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -394,7 +394,7 @@ EXPORT_SYMBOL(do_softirq);
 #ifdef CONFIG_PPC_MERGE
 
 static LIST_HEAD(irq_hosts);
-static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(irq_big_lock);
 static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
 static unsigned int irq_radix_writer;
 struct irq_map_entry irq_map[NR_IRQS];
@@ -968,7 +968,6 @@ void pci_scan_msi_device(struct pci_dev *dev) {}
 int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec) {return -1;}
 void pci_disable_msix(struct pci_dev *dev) {}
 void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
-void disable_msi_mode(struct pci_dev *dev, int pos, int type) {}
 void pci_no_msi(void) {}
 EXPORT_SYMBOL(pci_enable_msix);
 EXPORT_SYMBOL(pci_disable_msix);
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index dd2886f97e98..ef647e7a9dc3 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -59,12 +59,14 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	}
 
 	if (!ret) {
-		memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+		memcpy(p->ainsn.insn, p->addr,
+				MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 		p->opcode = *p->addr;
 		flush_icache_range((unsigned long)p->ainsn.insn,
 			(unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
 	}
 
+	p->ainsn.boostable = 0;
 	return ret;
 }
 
@@ -232,6 +234,38 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		return 1;
 
 ss_probe:
+	if (p->ainsn.boostable >= 0) {
+		unsigned int insn = *p->ainsn.insn;
+
+		/* regs->nip is also adjusted if emulate_step returns 1 */
+		ret = emulate_step(regs, insn);
+		if (ret > 0) {
+			/*
+			 * Once this instruction has been boosted
+			 * successfully, set the boostable flag
+			 */
+			if (unlikely(p->ainsn.boostable == 0))
+				p->ainsn.boostable = 1;
+
+			if (p->post_handler)
+				p->post_handler(p, regs, 0);
+
+			kcb->kprobe_status = KPROBE_HIT_SSDONE;
+			reset_current_kprobe();
+			preempt_enable_no_resched();
+			return 1;
+		} else if (ret < 0) {
+			/*
+			 * We don't allow kprobes on mtmsr(d)/rfi(d), etc.
+			 * So, we should never get here... but, its still
+			 * good to catch them, just in case...
+			 */
+			printk("Can't step on instruction %x\n", insn);
+			BUG();
+		} else if (ret == 0)
+			/* This instruction can't be boosted */
+			p->ainsn.boostable = -1;
+	}
 	prepare_singlestep(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 325f490a10cc..63dd2c3ad95e 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -44,12 +44,12 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 	int index;
 
 	/* get clock freq. if present */
-	clk = get_property(np, "clock-frequency", NULL);
+	clk = of_get_property(np, "clock-frequency", NULL);
 	if (clk && *clk)
 		clock = *clk;
 
 	/* get default speed if present */
-	spd = get_property(np, "current-speed", NULL);
+	spd = of_get_property(np, "current-speed", NULL);
 
 	/* If we have a location index, then try to use it */
 	if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
@@ -121,11 +121,11 @@ static int __init add_legacy_soc_port(struct device_node *np,
 	/* We only support ports that have a clock frequency properly
 	 * encoded in the device-tree.
 	 */
-	if (get_property(np, "clock-frequency", NULL) == NULL)
+	if (of_get_property(np, "clock-frequency", NULL) == NULL)
 		return -1;
 
 	/* if rtas uses this device, don't try to use it as well */
-	if (get_property(np, "used-by-rtas", NULL) != NULL)
+	if (of_get_property(np, "used-by-rtas", NULL) != NULL)
 		return -1;
 
 	/* Get the address */
@@ -157,7 +157,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 	DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
 
 	/* Get the ISA port number */
-	reg = get_property(np, "reg", NULL);
+	reg = of_get_property(np, "reg", NULL);
 	if (reg == NULL)
 		return -1;
 
@@ -168,7 +168,7 @@ static int __init add_legacy_isa_port(struct device_node *np,
 	/* Now look for an "ibm,aix-loc" property that gives us ordering
 	 * if any...
 	 */
-	typep = get_property(np, "ibm,aix-loc", NULL);
+	typep = of_get_property(np, "ibm,aix-loc", NULL);
 
 	/* If we have a location index, then use it */
 	if (typep && *typep == 'S')
@@ -206,7 +206,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	 * compatible UARTs on PCI need all sort of quirks (port offsets
 	 * etc...) that this code doesn't know about
 	 */
-	if (get_property(np, "clock-frequency", NULL) == NULL)
+	if (of_get_property(np, "clock-frequency", NULL) == NULL)
 		return -1;
 
 	/* Get the PCI address. Assume BAR 0 */
@@ -232,7 +232,7 @@ static int __init add_legacy_pci_port(struct device_node *np,
 	 * we get to their "reg" property
 	 */
 	if (np != pci_dev) {
-		const u32 *reg = get_property(np, "reg", NULL);
+		const u32 *reg = of_get_property(np, "reg", NULL);
 		if (reg && (*reg < 4))
 			index = lindex = *reg;
 	}
@@ -296,7 +296,7 @@ void __init find_legacy_serial_ports(void)
 	DBG(" -> find_legacy_serial_port()\n");
 
 	/* Now find out if one of these is out firmware console */
-	path = get_property(of_chosen, "linux,stdout-path", NULL);
+	path = of_get_property(of_chosen, "linux,stdout-path", NULL);
 	if (path != NULL) {
 		stdout = of_find_node_by_path(path);
 		if (stdout)
@@ -529,7 +529,7 @@ static int __init check_legacy_serial_console(void)
 	}
 	/* We are getting a weird phandle from OF ... */
 	/* ... So use the full path instead */
-	name = get_property(of_chosen, "linux,stdout-path", NULL);
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
 	if (name == NULL) {
 		DBG(" no linux,stdout-path !\n");
 		return -ENODEV;
@@ -541,12 +541,12 @@ static int __init check_legacy_serial_console(void)
 	}
 	DBG("stdout is %s\n", prom_stdout->full_name);
 
-	name = get_property(prom_stdout, "name", NULL);
+	name = of_get_property(prom_stdout, "name", NULL);
 	if (!name) {
 		DBG(" stdout package has no name !\n");
 		goto not_found;
 	}
-	spd = get_property(prom_stdout, "current-speed", NULL);
+	spd = of_get_property(prom_stdout, "current-speed", NULL);
 	if (spd)
 		speed = *spd;
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 89486b631284..c492cee90e0f 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -130,30 +130,31 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-/* find a better place for this function... */
 static void log_plpar_hcall_return(unsigned long rc, char *tag)
 {
-	if (rc == 0)		/* success, return */
+	switch(rc) {
+	case 0:
 		return;
-/* check for null tag ? */
-	if (rc == H_HARDWARE)
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed with hardware fault\n", tag);
-	else if (rc == H_FUNCTION)
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; function not allowed\n", tag);
-	else if (rc == H_AUTHORITY)
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; not authorized to this"
-		       " function\n", tag);
-	else if (rc == H_PARAMETER)
-		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
-		       tag);
-	else
-		printk(KERN_INFO
-		       "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n",
-		       tag, rc);
-
+	case H_HARDWARE:
+		printk(KERN_INFO "plpar-hcall (%s) "
+				"Hardware fault\n", tag);
+		return;
+	case H_FUNCTION:
+		printk(KERN_INFO "plpar-hcall (%s) "
+				"Function not allowed\n", tag);
+		return;
+	case H_AUTHORITY:
+		printk(KERN_INFO "plpar-hcall (%s) "
+				"Not authorized to this function\n", tag);
+		return;
+	case H_PARAMETER:
+		printk(KERN_INFO "plpar-hcall (%s) "
+				"Bad parameter(s)\n",tag);
+		return;
+	default:
+		printk(KERN_INFO "plpar-hcall (%s) "
+				"Unexpected rc(0x%lx)\n", tag, rc);
+	}
 }
 
 /*
@@ -321,15 +322,16 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	struct device_node *rtas_node;
 	const int *lrdrp = NULL;
 
-	rtas_node = find_path_device("/rtas");
+	rtas_node = of_find_node_by_path("/rtas");
 	if (rtas_node)
-		lrdrp = get_property(rtas_node, "ibm,lrdr-capacity", NULL);
+		lrdrp = of_get_property(rtas_node, "ibm,lrdr-capacity", NULL);
 
 	if (lrdrp == NULL) {
 		partition_potential_processors = vdso_data->processorCount;
 	} else {
 		partition_potential_processors = *(lrdrp + 4);
 	}
+	of_node_put(rtas_node);
 
 	partition_active_processors = lparcfg_count_active_processors();
 
@@ -537,25 +539,27 @@ static int lparcfg_data(struct seq_file *m, void *v)
 
 	seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
 
-	rootdn = find_path_device("/");
+	rootdn = of_find_node_by_path("/");
 	if (rootdn) {
-		tmp = get_property(rootdn, "model", NULL);
+		tmp = of_get_property(rootdn, "model", NULL);
 		if (tmp) {
 			model = tmp;
 			/* Skip "IBM," - see platforms/iseries/dt.c */
 			if (firmware_has_feature(FW_FEATURE_ISERIES))
 				model += 4;
 		}
-		tmp = get_property(rootdn, "system-id", NULL);
+		tmp = of_get_property(rootdn, "system-id", NULL);
 		if (tmp) {
 			system_id = tmp;
 			/* Skip "IBM," - see platforms/iseries/dt.c */
 			if (firmware_has_feature(FW_FEATURE_ISERIES))
 				system_id += 4;
 		}
-		lp_index_ptr = get_property(rootdn, "ibm,partition-no", NULL);
+		lp_index_ptr = of_get_property(rootdn, "ibm,partition-no",
+					NULL);
 		if (lp_index_ptr)
 			lp_index = *lp_index_ptr;
+		of_node_put(rootdn);
 	}
 	seq_printf(m, "serial_number=%s\n", system_id);
 	seq_printf(m, "system_type=%s\n", model);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index a24b09c27718..704375bda73a 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -72,8 +72,8 @@ int default_machine_kexec_prepare(struct kimage *image)
 	/* We also should not overwrite the tce tables */
 	for (node = of_find_node_by_type(NULL, "pci"); node != NULL;
 			node = of_find_node_by_type(node, "pci")) {
-		basep = get_property(node, "linux,tce-base", NULL);
-		sizep = get_property(node, "linux,tce-size", NULL);
+		basep = of_get_property(node, "linux,tce-base", NULL);
+		sizep = of_get_property(node, "linux,tce-size", NULL);
 		if (basep == NULL || sizep == NULL)
 			continue;
 
@@ -294,19 +294,19 @@ static unsigned long htab_base, kernel_end;
 static struct property htab_base_prop = {
 	.name = "linux,htab-base",
 	.length = sizeof(unsigned long),
-	.value = (unsigned char *)&htab_base,
+	.value = &htab_base,
 };
 
 static struct property htab_size_prop = {
 	.name = "linux,htab-size",
 	.length = sizeof(unsigned long),
-	.value = (unsigned char *)&htab_size_bytes,
+	.value = &htab_size_bytes,
 };
 
 static struct property kernel_end_prop = {
 	.name = "linux,kernel-end",
 	.length = sizeof(unsigned long),
-	.value = (unsigned char *)&kernel_end,
+	.value = &kernel_end,
 };
 
 static void __init export_htab_values(void)
@@ -335,7 +335,7 @@ static void __init export_htab_values(void)
 static struct property crashk_base_prop = {
 	.name = "linux,crashkernel-base",
 	.length = sizeof(unsigned long),
-	.value = (unsigned char *)&crashk_res.start,
+	.value = &crashk_res.start,
 };
 
 static unsigned long crashk_size;
@@ -343,7 +343,7 @@ static unsigned long crashk_size;
 static struct property crashk_size_prop = {
 	.name = "linux,crashkernel-size",
 	.length = sizeof(unsigned long),
-	.value = (unsigned char *)&crashk_size,
+	.value = &crashk_size,
 };
 
 static void __init export_crashk_values(void)
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 412bea3cf813..98decf8ebff4 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -734,10 +734,6 @@ _GLOBAL(abs)
 	sub	r3,r3,r4
 	blr
 
-_GLOBAL(_get_SP)
-	mr	r3,r1		/* Close enough */
-	blr
-
 /*
  * Create a kernel thread
  *   kernel_thread(fn, arg, flags)
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index e921514e655b..0c8ea7659d92 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -120,6 +120,117 @@ void of_device_unregister(struct of_device *ofdev)
 }
 
 
+static ssize_t of_device_get_modalias(struct of_device *ofdev,
+					char *str, ssize_t len)
+{
+	const char *compat;
+	int cplen, i;
+	ssize_t tsize, csize, repend;
+
+	/* Name & Type */
+	csize = snprintf(str, len, "of:N%sT%s",
+				ofdev->node->name, ofdev->node->type);
+
+	/* Get compatible property if any */
+	compat = of_get_property(ofdev->node, "compatible", &cplen);
+	if (!compat)
+		return csize;
+
+	/* Find true end (we tolerate multiple \0 at the end */
+	for (i=(cplen-1); i>=0 && !compat[i]; i--)
+		cplen--;
+	if (!cplen)
+		return csize;
+	cplen++;
+
+	/* Check space (need cplen+1 chars including final \0) */
+	tsize = csize + cplen;
+	repend = tsize;
+
+	if (csize>=len)		/* @ the limit, all is already filled */
+		return tsize;
+
+	if (tsize>=len) {		/* limit compat list */
+		cplen = len-csize-1;
+		repend = len;
+	}
+
+	/* Copy and do char replacement */
+	memcpy(&str[csize+1], compat, cplen);
+	for (i=csize; i<repend; i++) {
+		char c = str[i];
+		if (c=='\0')
+			str[i] = 'C';
+		else if (c==' ')
+			str[i] = '_';
+	}
+
+	return tsize;
+}
+
+int of_device_uevent(struct device *dev,
+		char **envp, int num_envp, char *buffer, int buffer_size)
+{
+	struct of_device *ofdev;
+	const char *compat;
+	int i = 0, length = 0, seen = 0, cplen, sl;
+
+	if (!dev)
+		return -ENODEV;
+
+	ofdev = to_of_device(dev);
+
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "OF_NAME=%s", ofdev->node->name))
+		return -ENOMEM;
+
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "OF_TYPE=%s", ofdev->node->type))
+		return -ENOMEM;
+
+        /* Since the compatible field can contain pretty much anything
+         * it's not really legal to split it out with commas. We split it
+         * up using a number of environment variables instead. */
+
+	compat = of_get_property(ofdev->node, "compatible", &cplen);
+	while (compat && *compat && cplen > 0) {
+		if (add_uevent_var(envp, num_envp, &i,
+				   buffer, buffer_size, &length,
+				   "OF_COMPATIBLE_%d=%s", seen, compat))
+			return -ENOMEM;
+
+		sl = strlen (compat) + 1;
+		compat += sl;
+		cplen -= sl;
+		seen++;
+	}
+
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "OF_COMPATIBLE_N=%d", seen))
+		return -ENOMEM;
+
+	/* modalias is trickier, we add it in 2 steps */
+	if (add_uevent_var(envp, num_envp, &i,
+			   buffer, buffer_size, &length,
+			   "MODALIAS="))
+		return -ENOMEM;
+
+	sl = of_device_get_modalias(ofdev, &buffer[length-1],
+					buffer_size-length);
+	if (sl >= (buffer_size-length))
+		return -ENOMEM;
+
+	length += sl;
+
+	envp[i] = NULL;
+
+	return 0;
+}
+
+
 EXPORT_SYMBOL(of_match_node);
 EXPORT_SYMBOL(of_match_device);
 EXPORT_SYMBOL(of_device_register);
@@ -127,3 +238,4 @@ EXPORT_SYMBOL(of_device_unregister);
 EXPORT_SYMBOL(of_dev_get);
 EXPORT_SYMBOL(of_dev_put);
 EXPORT_SYMBOL(of_release_dev);
+EXPORT_SYMBOL(of_device_uevent);
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index b7345176b399..908ed7926db4 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -133,6 +133,7 @@ static int of_platform_device_resume(struct device * dev)
 struct bus_type of_platform_bus_type = {
        .name	= "of_platform",
        .match	= of_platform_bus_match,
+       .uevent	= of_device_uevent,
        .probe	= of_platform_device_probe,
        .remove	= of_platform_device_remove,
        .suspend	= of_platform_device_suspend,
@@ -177,7 +178,7 @@ static void of_platform_make_bus_id(struct of_device *dev)
 	 * and 'D' for MMIO DCRs.
 	 */
 #ifdef CONFIG_PPC_DCR
-	reg = get_property(node, "dcr-reg", NULL);
+	reg = of_get_property(node, "dcr-reg", NULL);
 	if (reg) {
 #ifdef CONFIG_PPC_DCR_NATIVE
 		snprintf(name, BUS_ID_SIZE, "d%x.%s",
@@ -197,7 +198,7 @@ static void of_platform_make_bus_id(struct of_device *dev)
 	/*
 	 * For MMIO, get the physical address
 	 */
-	reg = get_property(node, "reg", NULL);
+	reg = of_get_property(node, "reg", NULL);
 	if (reg) {
 		addr = of_translate_address(node, reg);
 		if (addr != OF_BAD_ADDR) {
@@ -475,9 +476,6 @@ static struct of_platform_driver of_pci_phb_driver = {
        .name = "of-pci",
        .match_table = of_pci_phb_ids,
        .probe = of_pci_phb_probe,
-       .driver = {
-	       .multithread_probe = 1,
-       },
 };
 
 static __init int of_pci_phb_init(void)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index d8ef2e100505..f022862de344 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -637,7 +637,7 @@ make_one_node_map(struct device_node* node, u8 pci_bus)
 
 	if (pci_bus >= pci_bus_count)
 		return;
-	bus_range = get_property(node, "bus-range", &len);
+	bus_range = of_get_property(node, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, "
 		       "assuming it starts at 0\n", node->full_name);
@@ -649,17 +649,20 @@ make_one_node_map(struct device_node* node, u8 pci_bus)
 		struct pci_dev* dev;
 		const unsigned int *class_code, *reg;
 	
-		class_code = get_property(node, "class-code", NULL);
+		class_code = of_get_property(node, "class-code", NULL);
 		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
 			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
 			continue;
-		reg = get_property(node, "reg", NULL);
+		reg = of_get_property(node, "reg", NULL);
 		if (!reg)
 			continue;
-		dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
-		if (!dev || !dev->subordinate)
+		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+		if (!dev || !dev->subordinate) {
+			pci_dev_put(dev);
 			continue;
+		}
 		make_one_node_map(node, dev->subordinate->number);
+		pci_dev_put(dev);
 	}
 }
 	
@@ -669,6 +672,7 @@ pcibios_make_OF_bus_map(void)
 	int i;
 	struct pci_controller* hose;
 	struct property *map_prop;
+	struct device_node *dn;
 
 	pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
 	if (!pci_to_OF_bus_map) {
@@ -690,12 +694,13 @@ pcibios_make_OF_bus_map(void)
 			continue;
 		make_one_node_map(node, hose->first_busno);
 	}
-	map_prop = of_find_property(find_path_device("/"),
-			"pci-OF-bus-map", NULL);
+	dn = of_find_node_by_path("/");
+	map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
 	if (map_prop) {
 		BUG_ON(pci_bus_count > map_prop->length);
 		memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
 	}
+	of_node_put(dn);
 #ifdef DEBUG
 	printk("PCI->OF bus map:\n");
 	for (i=0; i<pci_bus_count; i++) {
@@ -724,7 +729,7 @@ scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void*
 		 * a fake root for all functions of a multi-function device,
 		 * we go down them as well.
 		 */
-		class_code = get_property(node, "class-code", NULL);
+		class_code = of_get_property(node, "class-code", NULL);
 		if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
 			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
 			strcmp(node->name, "multifunc-device"))
@@ -744,7 +749,7 @@ static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
 	unsigned int psize;
 
 	while ((np = of_get_next_child(parent, np)) != NULL) {
-		reg = get_property(np, "reg", &psize);
+		reg = of_get_property(np, "reg", &psize);
 		if (reg == NULL || psize < 4)
 			continue;
 		if (((reg[0] >> 8) & 0xff) == devfn)
@@ -859,7 +864,7 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
 	if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
 			find_OF_pci_device_filter, (void *)node))
 		return -ENODEV;
-	reg = get_property(node, "reg", NULL);
+	reg = of_get_property(node, "reg", NULL);
 	if (!reg)
 		return -ENODEV;
 	*bus = (reg[0] >> 16) & 0xff;
@@ -895,14 +900,14 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	int rlen = 0, orig_rlen;
 	int memno = 0;
 	struct resource *res;
-	int np, na = prom_n_addr_cells(dev);
+	int np, na = of_n_addr_cells(dev);
 	np = na + 5;
 
 	/* First we try to merge ranges to fix a problem with some pmacs
 	 * that can have more than 3 ranges, fortunately using contiguous
 	 * addresses -- BenH
 	 */
-	dt_ranges = get_property(dev, "ranges", &rlen);
+	dt_ranges = of_get_property(dev, "ranges", &rlen);
 	if (!dt_ranges)
 		return;
 	/* Sanity check, though hopefully that never happens */
@@ -1006,14 +1011,19 @@ void __init
 pci_create_OF_bus_map(void)
 {
 	struct property* of_prop;
-	
+	struct device_node *dn;
+
 	of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
-	if (of_prop && find_path_device("/")) {
+	if (!of_prop)
+		return;
+	dn = of_find_node_by_path("/");
+	if (dn) {
 		memset(of_prop, -1, sizeof(struct property) + 256);
 		of_prop->name = "pci-OF-bus-map";
 		of_prop->length = 256;
-		of_prop->value = (unsigned char *)&of_prop[1];
-		prom_add_property(find_path_device("/"), of_prop);
+		of_prop->value = &of_prop[1];
+		prom_add_property(dn, of_prop);
+		of_node_put(dn);
 	}
 }
 
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 7e97d71a5f8f..60d7d4baa227 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -61,8 +61,7 @@ void iSeries_pcibios_init(void);
 
 LIST_HEAD(hose_list);
 
-struct dma_mapping_ops *pci_dma_ops;
-EXPORT_SYMBOL(pci_dma_ops);
+static struct dma_mapping_ops *pci_dma_ops;
 
 int global_phb_number;		/* Global phb counter */
 
@@ -70,6 +69,17 @@ int global_phb_number;		/* Global phb counter */
 struct pci_dev *ppc64_isabridge_dev = NULL;
 EXPORT_SYMBOL_GPL(ppc64_isabridge_dev);
 
+void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+{
+	pci_dma_ops = dma_ops;
+}
+
+struct dma_mapping_ops *get_pci_dma_ops(void)
+{
+	return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
 static void fixup_broken_pcnet32(struct pci_dev* dev)
 {
 	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
@@ -258,7 +268,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
 	const u32 *prop;
 	int len;
 
-	prop = get_property(np, name, &len);
+	prop = of_get_property(np, name, &len);
 	if (prop && len >= 4)
 		return *prop;
 	return def;
@@ -291,7 +301,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
 	u32 i;
 	int proplen;
 
-	addrs = get_property(node, "assigned-addresses", &proplen);
+	addrs = of_get_property(node, "assigned-addresses", &proplen);
 	if (!addrs)
 		return;
 	DBG("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
@@ -333,7 +343,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
 	if (!dev)
 		return NULL;
-	type = get_property(node, "device_type", NULL);
+	type = of_get_property(node, "device_type", NULL);
 	if (type == NULL)
 		type = "";
 
@@ -397,7 +407,7 @@ void __devinit of_scan_bus(struct device_node *node,
 
 	while ((child = of_get_next_child(node, child)) != NULL) {
 		DBG("  * %s\n", child->full_name);
-		reg = get_property(child, "reg", &reglen);
+		reg = of_get_property(child, "reg", &reglen);
 		if (reg == NULL || reglen < 20)
 			continue;
 		devfn = (reg[0] >> 8) & 0xff;
@@ -430,13 +440,13 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
 	DBG("of_scan_pci_bridge(%s)\n", node->full_name);
 
 	/* parse bus-range property */
-	busrange = get_property(node, "bus-range", &len);
+	busrange = of_get_property(node, "bus-range", &len);
 	if (busrange == NULL || len != 8) {
 		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
 		       node->full_name);
 		return;
 	}
-	ranges = get_property(node, "ranges", &len);
+	ranges = of_get_property(node, "ranges", &len);
 	if (ranges == NULL) {
 		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
 		       node->full_name);
@@ -900,7 +910,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
 	unsigned int size;
 	int rlen = 0;
 
-	range = get_property(isa_node, "ranges", &rlen);
+	range = of_get_property(isa_node, "ranges", &rlen);
 	if (range == NULL || (rlen < sizeof(struct isa_range))) {
 		printk(KERN_ERR "no ISA ranges or unexpected isa range size,"
 		       "mapping 64k\n");
@@ -947,7 +957,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	int rlen = 0;
 	int memno = 0;
 	struct resource *res;
-	int np, na = prom_n_addr_cells(dev);
+	int np, na = of_n_addr_cells(dev);
 	unsigned long pci_addr, cpu_phys_addr;
 
 	np = na + 5;
@@ -960,7 +970,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	 *			(size depending on dev->n_addr_cells)
 	 *   cells 4+5 or 5+6:	the size of the range
 	 */
-	ranges = get_property(dev, "ranges", &rlen);
+	ranges = of_get_property(dev, "ranges", &rlen);
 	if (ranges == NULL)
 		return;
 	hose->io_base_phys = 0;
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index 68df018dae0e..d7d36df9c053 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -40,7 +40,8 @@
 static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 {
 	struct pci_controller *phb = data;
-	const int *type = get_property(dn, "ibm,pci-config-space-type", NULL);
+	const int *type =
+		of_get_property(dn, "ibm,pci-config-space-type", NULL);
 	const u32 *regs;
 	struct pci_dn *pdn;
 
@@ -54,14 +55,14 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data)
 	dn->data = pdn;
 	pdn->node = dn;
 	pdn->phb = phb;
-	regs = get_property(dn, "reg", NULL);
+	regs = of_get_property(dn, "reg", NULL);
 	if (regs) {
 		/* First register entry is addr (00BBSS00)  */
 		pdn->busno = (regs[0] >> 16) & 0xff;
 		pdn->devfn = (regs[0] >> 8) & 0xff;
 	}
 	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
-		const u32 *busp = get_property(dn, "linux,subbus", NULL);
+		const u32 *busp = of_get_property(dn, "linux,subbus", NULL);
 		if (busp)
 			pdn->bussubno = *busp;
 	}
@@ -100,7 +101,7 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 		u32 class;
 
 		nextdn = NULL;
-		classp = get_property(dn, "class-code", NULL);
+		classp = of_get_property(dn, "class-code", NULL);
 		class = classp ? *classp : 0;
 
 		if (pre && ((ret = pre(dn, data)) != NULL))
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index ecee596d28f6..ff252aaead12 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -20,7 +20,6 @@
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/ide.h>
 #include <asm/atomic.h>
 #include <asm/checksum.h>
 #include <asm/pgtable.h>
@@ -84,8 +83,6 @@ EXPORT_SYMBOL(strncpy);
 EXPORT_SYMBOL(strcat);
 EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strcasecmp);
-EXPORT_SYMBOL(strncasecmp);
 
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index f3d4dd580dd6..e509aae2feb3 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -305,9 +305,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		set_dabr(new->thread.dabr);
 		__get_cpu_var(current_dabr) = new->thread.dabr;
 	}
-
-	flush_tlb_pending();
-#endif
+#endif /* CONFIG_PPC64 */
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
@@ -402,11 +400,11 @@ static void printbits(unsigned long val, struct regbit *bits)
 }
 
 #ifdef CONFIG_PPC64
-#define REG		"%016lX"
+#define REG		"%016lx"
 #define REGS_PER_LINE	4
 #define LAST_VOLATILE	13
 #else
-#define REG		"%08lX"
+#define REG		"%08lx"
 #define REGS_PER_LINE	8
 #define LAST_VOLATILE	12
 #endif
@@ -421,7 +419,7 @@ void show_regs(struct pt_regs * regs)
 	       regs, regs->trap, print_tainted(), init_utsname()->release);
 	printk("MSR: "REG" ", regs->msr);
 	printbits(regs->msr, msr_bits);
-	printk("  CR: %08lX  XER: %08lX\n", regs->ccr, regs->xer);
+	printk("  CR: %08lx  XER: %08lx\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
 	if (trap == 0x300 || trap == 0x600)
 		printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr);
@@ -465,8 +463,13 @@ void flush_thread(void)
 #ifdef CONFIG_PPC64
 	struct thread_info *t = current_thread_info();
 
-	if (t->flags & _TIF_ABI_PENDING)
-		t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
+	if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
+		clear_ti_thread_flag(t, TIF_ABI_PENDING);
+		if (test_ti_thread_flag(t, TIF_32BIT))
+			clear_ti_thread_flag(t, TIF_32BIT);
+		else
+			set_ti_thread_flag(t, TIF_32BIT);
+	}
 #endif
 
 	discard_lazy_cpu_state();
@@ -567,7 +570,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	kregs->nip = *((unsigned long *)ret_from_fork);
 #else
 	kregs->nip = (unsigned long)ret_from_fork;
-	p->thread.last_syscall = -1;
 #endif
 
 	return 0;
@@ -818,6 +820,35 @@ out:
 	return error;
 }
 
+#ifdef CONFIG_IRQSTACKS
+static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
+				  unsigned long nbytes)
+{
+	unsigned long stack_page;
+	unsigned long cpu = task_cpu(p);
+
+	/*
+	 * Avoid crashing if the stack has overflowed and corrupted
+	 * task_cpu(p), which is in the thread_info struct.
+	 */
+	if (cpu < NR_CPUS && cpu_possible(cpu)) {
+		stack_page = (unsigned long) hardirq_ctx[cpu];
+		if (sp >= stack_page + sizeof(struct thread_struct)
+		    && sp <= stack_page + THREAD_SIZE - nbytes)
+			return 1;
+
+		stack_page = (unsigned long) softirq_ctx[cpu];
+		if (sp >= stack_page + sizeof(struct thread_struct)
+		    && sp <= stack_page + THREAD_SIZE - nbytes)
+			return 1;
+	}
+	return 0;
+}
+
+#else
+#define valid_irq_stack(sp, p, nb)	0
+#endif /* CONFIG_IRQSTACKS */
+
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
@@ -827,19 +858,7 @@ int validate_sp(unsigned long sp, struct task_struct *p,
 	    && sp <= stack_page + THREAD_SIZE - nbytes)
 		return 1;
 
-#ifdef CONFIG_IRQSTACKS
-	stack_page = (unsigned long) hardirq_ctx[task_cpu(p)];
-	if (sp >= stack_page + sizeof(struct thread_struct)
-	    && sp <= stack_page + THREAD_SIZE - nbytes)
-		return 1;
-
-	stack_page = (unsigned long) softirq_ctx[task_cpu(p)];
-	if (sp >= stack_page + sizeof(struct thread_struct)
-	    && sp <= stack_page + THREAD_SIZE - nbytes)
-		return 1;
-#endif
-
-	return 0;
+	return valid_irq_stack(sp, p, nbytes);
 }
 
 #ifdef CONFIG_PPC64
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3e86e6e0f778..caef555f2dc0 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -390,18 +390,19 @@ static unsigned long __init unflatten_dt_node(unsigned long mem,
 		if (allnextpp) {
 			pp->name = "name";
 			pp->length = sz;
-			pp->value = (unsigned char *)(pp + 1);
+			pp->value = pp + 1;
 			*prev_pp = pp;
 			prev_pp = &pp->next;
 			memcpy(pp->value, ps, sz - 1);
 			((char *)pp->value)[sz - 1] = 0;
-			DBG("fixed up name for %s -> %s\n", pathp, pp->value);
+			DBG("fixed up name for %s -> %s\n", pathp,
+				(char *)pp->value);
 		}
 	}
 	if (allnextpp) {
 		*prev_pp = NULL;
-		np->name = get_property(np, "name", NULL);
-		np->type = get_property(np, "device_type", NULL);
+		np->name = of_get_property(np, "name", NULL);
+		np->type = of_get_property(np, "device_type", NULL);
 
 		if (!np->name)
 			np->name = "<NULL>";
@@ -719,6 +720,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
 					    const char *uname, int depth, void *data)
 {
 	unsigned long *lprop;
+	u32 *prop;
 	unsigned long l;
 	char *p;
 
@@ -760,6 +762,22 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
                crashk_res.end = crashk_res.start + *lprop - 1;
 #endif
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	DBG("Looking for initrd properties... ");
+	prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
+	if (prop) {
+		initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+		prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
+		if (prop) {
+			initrd_end = (unsigned long)__va(of_read_ulong(prop, l/4));
+			initrd_below_start_ok = 1;
+		} else {
+			initrd_start = 0;
+		}
+	}
+	DBG("initrd_start=0x%lx  initrd_end=0x%lx\n", initrd_start, initrd_end);
+#endif /* CONFIG_BLK_DEV_INITRD */
+
 	/* Retreive command line */
  	p = of_get_flat_dt_prop(node, "bootargs", &l);
 	if (p != NULL && l > 0)
@@ -926,6 +944,12 @@ static void __init early_reserve_mem(void)
 	self_size = initial_boot_params->totalsize;
 	lmb_reserve(self_base, self_size);
 
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* then reserve the initrd, if any */
+	if (initrd_start && (initrd_end > initrd_start))
+		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+#endif /* CONFIG_BLK_DEV_INITRD */
+
 #ifdef CONFIG_PPC32
 	/* 
 	 * Handle the case where we might be booting from an old kexec
@@ -954,9 +978,6 @@ static void __init early_reserve_mem(void)
 		size = *(reserve_map++);
 		if (size == 0)
 			break;
-		/* skip if the reservation is for the blob */
-		if (base == self_base && size == self_size)
-			continue;
 		DBG("reserving: %llx -> %llx\n", base, size);
 		lmb_reserve(base, size);
 	}
@@ -1021,102 +1042,46 @@ void __init early_init_devtree(void *params)
 
 #undef printk
 
-int
-prom_n_addr_cells(struct device_node* np)
+int of_n_addr_cells(struct device_node* np)
 {
 	const int *ip;
 	do {
 		if (np->parent)
 			np = np->parent;
-		ip = get_property(np, "#address-cells", NULL);
+		ip = of_get_property(np, "#address-cells", NULL);
 		if (ip != NULL)
 			return *ip;
 	} while (np->parent);
 	/* No #address-cells property for the root node, default to 1 */
 	return 1;
 }
-EXPORT_SYMBOL(prom_n_addr_cells);
+EXPORT_SYMBOL(of_n_addr_cells);
 
-int
-prom_n_size_cells(struct device_node* np)
+int of_n_size_cells(struct device_node* np)
 {
 	const int* ip;
 	do {
 		if (np->parent)
 			np = np->parent;
-		ip = get_property(np, "#size-cells", NULL);
+		ip = of_get_property(np, "#size-cells", NULL);
 		if (ip != NULL)
 			return *ip;
 	} while (np->parent);
 	/* No #size-cells property for the root node, default to 1 */
 	return 1;
 }
-EXPORT_SYMBOL(prom_n_size_cells);
-
-/**
- * Construct and return a list of the device_nodes with a given name.
- */
-struct device_node *find_devices(const char *name)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (np->name != 0 && strcasecmp(np->name, name) == 0) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-EXPORT_SYMBOL(find_devices);
-
-/**
- * Construct and return a list of the device_nodes with a given type.
- */
-struct device_node *find_type_devices(const char *type)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (np->type != 0 && strcasecmp(np->type, type) == 0) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-EXPORT_SYMBOL(find_type_devices);
-
-/**
- * Returns all nodes linked together
- */
-struct device_node *find_all_nodes(void)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		*prevp = np;
-		prevp = &np->next;
-	}
-	*prevp = NULL;
-	return head;
-}
-EXPORT_SYMBOL(find_all_nodes);
+EXPORT_SYMBOL(of_n_size_cells);
 
 /** Checks if the given "compat" string matches one of the strings in
  * the device's "compatible" property
  */
-int device_is_compatible(const struct device_node *device, const char *compat)
+int of_device_is_compatible(const struct device_node *device,
+		const char *compat)
 {
 	const char* cp;
 	int cplen, l;
 
-	cp = get_property(device, "compatible", &cplen);
+	cp = of_get_property(device, "compatible", &cplen);
 	if (cp == NULL)
 		return 0;
 	while (cplen > 0) {
@@ -1129,7 +1094,7 @@ int device_is_compatible(const struct device_node *device, const char *compat)
 
 	return 0;
 }
-EXPORT_SYMBOL(device_is_compatible);
+EXPORT_SYMBOL(of_device_is_compatible);
 
 
 /**
@@ -1143,51 +1108,13 @@ int machine_is_compatible(const char *compat)
 
 	root = of_find_node_by_path("/");
 	if (root) {
-		rc = device_is_compatible(root, compat);
+		rc = of_device_is_compatible(root, compat);
 		of_node_put(root);
 	}
 	return rc;
 }
 EXPORT_SYMBOL(machine_is_compatible);
 
-/**
- * Construct and return a list of the device_nodes with a given type
- * and compatible property.
- */
-struct device_node *find_compatible_devices(const char *type,
-					    const char *compat)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (type != NULL
-		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
-			continue;
-		if (device_is_compatible(np, compat)) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-EXPORT_SYMBOL(find_compatible_devices);
-
-/**
- * Find the device_node with a given full_name.
- */
-struct device_node *find_path_device(const char *path)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
-			return np;
-	return NULL;
-}
-EXPORT_SYMBOL(find_path_device);
-
 /*******
  *
  * New implementation of the OF "find" APIs, return a refcounted
@@ -1280,7 +1207,7 @@ struct device_node *of_find_compatible_node(struct device_node *from,
 		if (type != NULL
 		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
 			continue;
-		if (device_is_compatible(np, compatible) && of_node_get(np))
+		if (of_device_is_compatible(np, compatible) && of_node_get(np))
 			break;
 	}
 	of_node_put(from);
@@ -1527,8 +1454,8 @@ static int of_finish_dynamic_node(struct device_node *node)
 	int err = 0;
 	const phandle *ibm_phandle;
 
-	node->name = get_property(node, "name", NULL);
-	node->type = get_property(node, "device_type", NULL);
+	node->name = of_get_property(node, "name", NULL);
+	node->type = of_get_property(node, "device_type", NULL);
 
 	if (!parent) {
 		err = -ENODEV;
@@ -1542,7 +1469,7 @@ static int of_finish_dynamic_node(struct device_node *node)
 		return -ENODEV;
 
 	/* fix up new node's linux_phandle field */
-	if ((ibm_phandle = get_property(node, "ibm,phandle", NULL)))
+	if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
 		node->linux_phandle = *ibm_phandle;
 
 out:
@@ -1599,18 +1526,19 @@ struct property *of_find_property(const struct device_node *np,
 
 	return pp;
 }
+EXPORT_SYMBOL(of_find_property);
 
 /*
  * Find a property with a given name for a given node
  * and return the value.
  */
-const void *get_property(const struct device_node *np, const char *name,
+const void *of_get_property(const struct device_node *np, const char *name,
 			 int *lenp)
 {
 	struct property *pp = of_find_property(np,name,lenp);
 	return pp ? pp->value : NULL;
 }
-EXPORT_SYMBOL(get_property);
+EXPORT_SYMBOL(of_get_property);
 
 /*
  * Add a property to a node
@@ -1741,10 +1669,10 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
 		/* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
 		 * fallback to "reg" property and assume no threads
 		 */
-		intserv = get_property(np, "ibm,ppc-interrupt-server#s",
+		intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
 				&plen);
 		if (intserv == NULL) {
-			const u32 *reg = get_property(np, "reg", NULL);
+			const u32 *reg = of_get_property(np, "reg", NULL);
 			if (reg == NULL)
 				continue;
 			if (*reg == hardid) {
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 4fb5938ce6d3..e27d9d1b6e67 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2035,39 +2035,50 @@ static void __init fixup_device_tree_maple(void)
 #endif
 
 #ifdef CONFIG_PPC_CHRP
-/* Pegasos and BriQ lacks the "ranges" property in the isa node */
+/*
+ * Pegasos and BriQ lacks the "ranges" property in the isa node
+ * Pegasos needs decimal IRQ 14/15, not hexadecimal
+ */
 static void __init fixup_device_tree_chrp(void)
 {
-	phandle isa;
-	u32 isa_ranges[6];
+	phandle ph;
+	u32 prop[6];
 	u32 rloc = 0x01006000; /* IO space; PCI device = 12 */
 	char *name;
 	int rc;
 
 	name = "/pci@80000000/isa@c";
-	isa = call_prom("finddevice", 1, 1, ADDR(name));
-	if (!PHANDLE_VALID(isa)) {
+	ph = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(ph)) {
 		name = "/pci@ff500000/isa@6";
-		isa = call_prom("finddevice", 1, 1, ADDR(name));
+		ph = call_prom("finddevice", 1, 1, ADDR(name));
 		rloc = 0x01003000; /* IO space; PCI device = 6 */
 	}
-	if (!PHANDLE_VALID(isa))
-		return;
-
-	rc = prom_getproplen(isa, "ranges");
-	if (rc != 0 && rc != PROM_ERROR)
-		return;
-
-	prom_printf("Fixing up missing ISA range on Pegasos...\n");
+	if (PHANDLE_VALID(ph)) {
+		rc = prom_getproplen(ph, "ranges");
+		if (rc == 0 || rc == PROM_ERROR) {
+			prom_printf("Fixing up missing ISA range on Pegasos...\n");
+
+			prop[0] = 0x1;
+			prop[1] = 0x0;
+			prop[2] = rloc;
+			prop[3] = 0x0;
+			prop[4] = 0x0;
+			prop[5] = 0x00010000;
+			prom_setprop(ph, name, "ranges", prop, sizeof(prop));
+		}
+	}
 
-	isa_ranges[0] = 0x1;
-	isa_ranges[1] = 0x0;
-	isa_ranges[2] = rloc;
-	isa_ranges[3] = 0x0;
-	isa_ranges[4] = 0x0;
-	isa_ranges[5] = 0x00010000;
-	prom_setprop(isa, name, "ranges",
-			isa_ranges, sizeof(isa_ranges));
+	name = "/pci@80000000/ide@C,1";
+	ph = call_prom("finddevice", 1, 1, ADDR(name));
+	if (PHANDLE_VALID(ph)) {
+		prom_printf("Fixing up IDE interrupt on Pegasos...\n");
+		prop[0] = 14;
+		prop[1] = 0x0;
+		prop[2] = 15;
+		prop[3] = 0x0;
+		prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32));
+	}
 }
 #else
 #define fixup_device_tree_chrp()
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 12c51e4ad2b4..aa40a5307294 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -5,6 +5,7 @@
 #include <linux/pci_regs.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/etherdevice.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 
@@ -67,9 +68,9 @@ static void of_bus_default_count_cells(struct device_node *dev,
 				       int *addrc, int *sizec)
 {
 	if (addrc)
-		*addrc = prom_n_addr_cells(dev);
+		*addrc = of_n_addr_cells(dev);
 	if (sizec)
-		*sizec = prom_n_size_cells(dev);
+		*sizec = of_n_size_cells(dev);
 }
 
 static u64 of_bus_default_map(u32 *addr, const u32 *range,
@@ -195,7 +196,7 @@ const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
 		return NULL;
 
 	/* Get "reg" or "assigned-addresses" property */
-	prop = get_property(dev, bus->addresses, &psize);
+	prop = of_get_property(dev, bus->addresses, &psize);
 	if (prop == NULL)
 		return NULL;
 	psize /= 4;
@@ -437,7 +438,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
 	 * to translate addresses that aren't supposed to be translated in
 	 * the first place. --BenH.
 	 */
-	ranges = get_property(parent, "ranges", &rlen);
+	ranges = of_get_property(parent, "ranges", &rlen);
 	if (ranges == NULL || rlen == 0) {
 		offset = of_read_number(addr, na);
 		memset(addr, 0, pna * 4);
@@ -577,7 +578,7 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
 		return NULL;
 
 	/* Get "reg" or "assigned-addresses" property */
-	prop = get_property(dev, bus->addresses, &psize);
+	prop = of_get_property(dev, bus->addresses, &psize);
 	if (prop == NULL)
 		return NULL;
 	psize /= 4;
@@ -649,17 +650,17 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 	/* busno is always one cell */
 	*busno = *(dma_window++);
 
-	prop = get_property(dn, "ibm,#dma-address-cells", NULL);
+	prop = of_get_property(dn, "ibm,#dma-address-cells", NULL);
 	if (!prop)
-		prop = get_property(dn, "#address-cells", NULL);
+		prop = of_get_property(dn, "#address-cells", NULL);
 
-	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
+	cells = prop ? *(u32 *)prop : of_n_addr_cells(dn);
 	*phys = of_read_number(dma_window, cells);
 
 	dma_window += cells;
 
-	prop = get_property(dn, "ibm,#dma-size-cells", NULL);
-	cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
+	prop = of_get_property(dn, "ibm,#dma-size-cells", NULL);
+	cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
 	*size = of_read_number(dma_window, cells);
 }
 
@@ -679,7 +680,7 @@ static struct device_node *of_irq_find_parent(struct device_node *child)
 		return NULL;
 
 	do {
-		parp = get_property(child, "interrupt-parent", NULL);
+		parp = of_get_property(child, "interrupt-parent", NULL);
 		if (parp == NULL)
 			p = of_get_parent(child);
 		else {
@@ -690,7 +691,7 @@ static struct device_node *of_irq_find_parent(struct device_node *child)
 		}
 		of_node_put(child);
 		child = p;
-	} while (p && get_property(p, "#interrupt-cells", NULL) == NULL);
+	} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
 
 	return p;
 }
@@ -715,7 +716,7 @@ void of_irq_map_init(unsigned int flags)
 		struct device_node *np;
 
 		for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
-			if (get_property(np, "interrupt-controller", NULL)
+			if (of_get_property(np, "interrupt-controller", NULL)
 			    == NULL)
 				continue;
 			/* Skip /chosen/interrupt-controller */
@@ -754,7 +755,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
 	 * is none, we are nice and just walk up the tree
 	 */
 	do {
-		tmp = get_property(ipar, "#interrupt-cells", NULL);
+		tmp = of_get_property(ipar, "#interrupt-cells", NULL);
 		if (tmp != NULL) {
 			intsize = *tmp;
 			break;
@@ -778,7 +779,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
 	 */
 	old = of_node_get(ipar);
 	do {
-		tmp = get_property(old, "#address-cells", NULL);
+		tmp = of_get_property(old, "#address-cells", NULL);
 		tnode = of_get_parent(old);
 		of_node_put(old);
 		old = tnode;
@@ -794,7 +795,8 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
 		/* Now check if cursor is an interrupt-controller and if it is
 		 * then we are done
 		 */
-		if (get_property(ipar, "interrupt-controller", NULL) != NULL) {
+		if (of_get_property(ipar, "interrupt-controller", NULL) !=
+				NULL) {
 			DBG(" -> got it !\n");
 			memcpy(out_irq->specifier, intspec,
 			       intsize * sizeof(u32));
@@ -805,7 +807,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
 		}
 
 		/* Now look for an interrupt-map */
-		imap = get_property(ipar, "interrupt-map", &imaplen);
+		imap = of_get_property(ipar, "interrupt-map", &imaplen);
 		/* No interrupt map, check for an interrupt parent */
 		if (imap == NULL) {
 			DBG(" -> no map, getting parent\n");
@@ -815,7 +817,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
 		imaplen /= sizeof(u32);
 
 		/* Look for a mask */
-		imask = get_property(ipar, "interrupt-map-mask", NULL);
+		imask = of_get_property(ipar, "interrupt-map-mask", NULL);
 
 		/* If we were passed no "reg" property and we attempt to parse
 		 * an interrupt-map, then #address-cells must be 0.
@@ -862,15 +864,13 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
 			/* Get #interrupt-cells and #address-cells of new
 			 * parent
 			 */
-			tmp = get_property(newpar, "#interrupt-cells",
-						  NULL);
+			tmp = of_get_property(newpar, "#interrupt-cells", NULL);
 			if (tmp == NULL) {
 				DBG(" -> parent lacks #interrupt-cells !\n");
 				goto fail;
 			}
 			newintsize = *tmp;
-			tmp = get_property(newpar, "#address-cells",
-						  NULL);
+			tmp = of_get_property(newpar, "#address-cells", NULL);
 			newaddrsize = (tmp == NULL) ? 0 : *tmp;
 
 			DBG(" -> newintsize=%d, newaddrsize=%d\n",
@@ -915,7 +915,7 @@ EXPORT_SYMBOL_GPL(of_irq_map_raw);
 static int of_irq_map_oldworld(struct device_node *device, int index,
 			       struct of_irq *out_irq)
 {
-	const u32 *ints;
+	const u32 *ints = NULL;
 	int intlen;
 
 	/*
@@ -927,7 +927,7 @@ static int of_irq_map_oldworld(struct device_node *device, int index,
 	 * everything together on these)
 	 */
 	while (device) {
-		ints = get_property(device, "AAPL,interrupts", &intlen);
+		ints = of_get_property(device, "AAPL,interrupts", &intlen);
 		if (ints != NULL)
 			break;
 		device = device->parent;
@@ -969,13 +969,13 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 		return of_irq_map_oldworld(device, index, out_irq);
 
 	/* Get the interrupts property */
-	intspec = get_property(device, "interrupts", &intlen);
+	intspec = of_get_property(device, "interrupts", &intlen);
 	if (intspec == NULL)
 		return -EINVAL;
 	intlen /= sizeof(u32);
 
 	/* Get the reg property (if any) */
-	addr = get_property(device, "reg", NULL);
+	addr = of_get_property(device, "reg", NULL);
 
 	/* Look for the interrupt parent. */
 	p = of_irq_find_parent(device);
@@ -983,7 +983,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 		return -EINVAL;
 
 	/* Get size of interrupt specifier */
-	tmp = get_property(p, "#interrupt-cells", NULL);
+	tmp = of_get_property(p, "#interrupt-cells", NULL);
 	if (tmp == NULL) {
 		of_node_put(p);
 		return -EINVAL;
@@ -1003,3 +1003,42 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
 	return res;
 }
 EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+/**
+ * Search the device tree for the best MAC address to use.  'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address.  If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot.  For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
+{
+	struct property *pp;
+
+	pp = of_find_property(np, "mac-address", NULL);
+	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+		return pp->value;
+
+	pp = of_find_property(np, "local-mac-address", NULL);
+	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+		return pp->value;
+
+	pp = of_find_property(np, "address", NULL);
+	if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+		return pp->value;
+
+	return NULL;
+}
+EXPORT_SYMBOL(of_get_mac_address);
+
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 6cbf2ae5d7aa..190b7ed1dbfb 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -450,7 +450,7 @@ static int ppc_rtas_sensors_show(struct seq_file *m, void *v)
 		int llen, offs;
 
 		sprintf (rstr, SENSOR_PREFIX"%04d", p->token);
-		loc = get_property(rtas_node, rstr, &llen);
+		loc = of_get_property(rtas_node, rstr, &llen);
 
 		/* A sensor may have multiple instances */
 		for (j = 0, offs = 0; j <= p->quant; j++) {
@@ -477,7 +477,7 @@ static int ppc_rtas_find_all_sensors(void)
 	const unsigned int *utmp;
 	int len, i;
 
-	utmp = get_property(rtas_node, "rtas-sensors", &len);
+	utmp = of_get_property(rtas_node, "rtas-sensors", &len);
 	if (utmp == NULL) {
 		printk (KERN_ERR "error: could not get rtas-sensors\n");
 		return 1;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 76b5d7ebdcc6..214780798289 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -182,7 +182,7 @@ void rtas_progress(char *s, unsigned short hex)
 	char *os;
 	static int display_character, set_indicator;
 	static int display_width, display_lines, form_feed;
-	const static int *row_width;
+	static const int *row_width;
 	static DEFINE_SPINLOCK(progress_lock);
 	static int current_line;
 	static int pending_newline = 0;  /* did last write end with unprinted newline? */
@@ -192,18 +192,19 @@ void rtas_progress(char *s, unsigned short hex)
 
 	if (display_width == 0) {
 		display_width = 0x10;
-		if ((root = find_path_device("/rtas"))) {
-			if ((p = get_property(root,
+		if ((root = of_find_node_by_path("/rtas"))) {
+			if ((p = of_get_property(root,
 					"ibm,display-line-length", NULL)))
 				display_width = *p;
-			if ((p = get_property(root,
+			if ((p = of_get_property(root,
 					"ibm,form-feed", NULL)))
 				form_feed = *p;
-			if ((p = get_property(root,
+			if ((p = of_get_property(root,
 					"ibm,display-number-of-lines", NULL)))
 				display_lines = *p;
-			row_width = get_property(root,
+			row_width = of_get_property(root,
 					"ibm,display-truncation-length", NULL);
+			of_node_put(root);
 		}
 		display_character = rtas_token("display-character");
 		set_indicator = rtas_token("set-indicator");
@@ -298,7 +299,7 @@ int rtas_token(const char *service)
 	const int *tokp;
 	if (rtas.dev == NULL)
 		return RTAS_UNKNOWN_SERVICE;
-	tokp = get_property(rtas.dev, service, NULL);
+	tokp = of_get_property(rtas.dev, service, NULL);
 	return tokp ? *tokp : RTAS_UNKNOWN_SERVICE;
 }
 EXPORT_SYMBOL(rtas_token);
@@ -832,12 +833,12 @@ void __init rtas_initialize(void)
 	if (rtas.dev) {
 		const u32 *basep, *entryp, *sizep;
 
-		basep = get_property(rtas.dev, "linux,rtas-base", NULL);
-		sizep = get_property(rtas.dev, "rtas-size", NULL);
+		basep = of_get_property(rtas.dev, "linux,rtas-base", NULL);
+		sizep = of_get_property(rtas.dev, "rtas-size", NULL);
 		if (basep != NULL && sizep != NULL) {
 			rtas.base = *basep;
 			rtas.size = *sizep;
-			entryp = get_property(rtas.dev,
+			entryp = of_get_property(rtas.dev,
 					"linux,rtas-entry", NULL);
 			if (entryp == NULL) /* Ugh */
 				rtas.entry = rtas.base;
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index ace9f4c86e67..f2286822be09 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -60,7 +60,7 @@ static int of_device_available(struct device_node * dn)
 {
         const char *status;
 
-        status = get_property(dn, "status", NULL);
+        status = of_get_property(dn, "status", NULL);
 
         if (!status)
                 return 1;
@@ -177,7 +177,7 @@ struct pci_ops rtas_pci_ops = {
 
 int is_python(struct device_node *dev)
 {
-	const char *model = get_property(dev, "model", NULL);
+	const char *model = of_get_property(dev, "model", NULL);
 
 	if (model && strstr(model, "Python"))
 		return 1;
@@ -247,7 +247,7 @@ static int phb_set_bus_ranges(struct device_node *dev,
 	const int *bus_range;
 	unsigned int len;
 
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		return 1;
  	}
@@ -274,7 +274,7 @@ int __devinit rtas_setup_phb(struct pci_controller *phb)
 	return 0;
 }
 
-unsigned long __init find_and_init_phbs(void)
+void __init find_and_init_phbs(void)
 {
 	struct device_node *node;
 	struct pci_controller *phb;
@@ -309,18 +309,16 @@ unsigned long __init find_and_init_phbs(void)
 	if (of_chosen) {
 		const int *prop;
 
-		prop = get_property(of_chosen,
+		prop = of_get_property(of_chosen,
 				"linux,pci-probe-only", NULL);
 		if (prop)
 			pci_probe_only = *prop;
 
-		prop = get_property(of_chosen,
+		prop = of_get_property(of_chosen,
 				"linux,pci-assign-all-buses", NULL);
 		if (prop)
 			pci_assign_all_buses = *prop;
 	}
-
-	return 0;
 }
 
 /* RPA-specific bits for removing PHBs */
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 89cfaf49d3de..370803722e47 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -21,7 +21,6 @@
 #include <linux/delay.h>
 #include <linux/initrd.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
 #include <linux/console.h>
@@ -304,26 +303,8 @@ struct seq_operations cpuinfo_op = {
 void __init check_for_initrd(void)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
-	const unsigned int *prop;
-	int len;
-
-	DBG(" -> check_for_initrd()\n");
-
-	if (of_chosen) {
-		prop = get_property(of_chosen, "linux,initrd-start", &len);
-		if (prop != NULL) {
-			initrd_start = (unsigned long)
-				__va(of_read_ulong(prop, len / 4));
-			prop = get_property(of_chosen,
-					"linux,initrd-end", &len);
-			if (prop != NULL) {
-				initrd_end = (unsigned long)
-					__va(of_read_ulong(prop, len / 4));
-				initrd_below_start_ok = 1;
-			} else
-				initrd_start = 0;
-		}
-	}
+	DBG(" -> check_for_initrd()  initrd_start=0x%lx  initrd_end=0x%lx\n",
+	    initrd_start, initrd_end);
 
 	/* If we were passed an initrd, set the ROOT_DEV properly if the values
 	 * look sensible. If not, clear initrd reference.
@@ -371,11 +352,12 @@ void __init smp_setup_cpu_maps(void)
 		const int *intserv;
 		int j, len = sizeof(u32), nthreads = 1;
 
-		intserv = get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+		intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s",
+				&len);
 		if (intserv)
 			nthreads = len / sizeof(int);
 		else {
-			intserv = get_property(dn, "reg", NULL);
+			intserv = of_get_property(dn, "reg", NULL);
 			if (!intserv)
 				intserv = &cpu;	/* assume logical == phys */
 		}
@@ -398,10 +380,10 @@ void __init smp_setup_cpu_maps(void)
 		int num_addr_cell, num_size_cell, maxcpus;
 		const unsigned int *ireg;
 
-		num_addr_cell = prom_n_addr_cells(dn);
-		num_size_cell = prom_n_size_cells(dn);
+		num_addr_cell = of_n_addr_cells(dn);
+		num_size_cell = of_n_size_cells(dn);
 
-		ireg = get_property(dn, "ibm,lrdr-capacity", NULL);
+		ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL);
 
 		if (!ireg)
 			goto out;
@@ -496,11 +478,39 @@ void probe_machine(void)
 	printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
 }
 
+/* Match a class of boards, not a specific device configuration. */
 int check_legacy_ioport(unsigned long base_port)
 {
-	if (ppc_md.check_legacy_ioport == NULL)
-		return 0;
-	return ppc_md.check_legacy_ioport(base_port);
+	struct device_node *parent, *np = NULL;
+	int ret = -ENODEV;
+
+	switch(base_port) {
+	case I8042_DATA_REG:
+		np = of_find_node_by_type(NULL, "8042");
+		break;
+	case FDC_BASE: /* FDC1 */
+		np = of_find_node_by_type(NULL, "fdc");
+		break;
+#ifdef CONFIG_PPC_PREP
+	case _PIDXR:
+	case _PNPWRP:
+	case PNPBIOS_BASE:
+		/* implement me */
+#endif
+	default:
+		/* ipmi is supposed to fail here */
+		break;
+	}
+	if (!np)
+		return ret;
+	parent = of_get_parent(np);
+	if (parent) {
+		if (strcmp(parent->type, "isa") == 0)
+			ret = 0;
+		of_node_put(parent);
+	}
+	of_node_put(np);
+	return ret;
 }
 EXPORT_SYMBOL(check_legacy_ioport);
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 44a6a3c47feb..35f8f443c14f 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -92,7 +92,8 @@ unsigned long __init early_init(unsigned long dt_ptr)
 
 	/* First zero the BSS -- use memset_io, some platforms don't have
 	 * caches on yet */
-	memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start);
+	memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
+			__bss_stop - __bss_start);
 
 	/*
 	 * Identify the CPU type and fix up code sections
@@ -195,18 +196,22 @@ EXPORT_SYMBOL(nvram_sync);
 
 #endif /* CONFIG_NVRAM */
 
-static struct cpu cpu_devices[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 int __init ppc_init(void)
 {
-	int i;
+	int cpu;
 
 	/* clear the progress line */
-	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
+	if (ppc_md.progress)
+		ppc_md.progress("             ", 0xffff);
 
 	/* register CPU devices */
-	for_each_possible_cpu(i)
-		register_cpu(&cpu_devices[i], i);
+	for_each_possible_cpu(cpu) {
+		struct cpu *c = &per_cpu(cpu_devices, cpu);
+		c->hotpluggable = 1;
+		register_cpu(c, cpu);
+	}
 
 	/* call platform init */
 	if (ppc_md.init != NULL) {
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 3733de30e84d..22083ce3cc30 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -20,7 +20,6 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/initrd.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
 #include <linux/console.h>
@@ -110,7 +109,7 @@ static void check_smt_enabled(void)
 	dn = of_find_node_by_path("/options");
 
 	if (dn) {
-		smt_option = get_property(dn, "ibm,smt-enabled", NULL);
+		smt_option = of_get_property(dn, "ibm,smt-enabled", NULL);
 
                 if (smt_option) {
 			if (!strcmp(smt_option, "on"))
@@ -305,10 +304,10 @@ static void __init initialize_cache_info(void)
 
 			size = 0;
 			lsize = cur_cpu_spec->dcache_bsize;
-			sizep = get_property(np, "d-cache-size", NULL);
+			sizep = of_get_property(np, "d-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = get_property(np, dc, NULL);
+			lsizep = of_get_property(np, dc, NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
@@ -322,10 +321,10 @@ static void __init initialize_cache_info(void)
 
 			size = 0;
 			lsize = cur_cpu_spec->icache_bsize;
-			sizep = get_property(np, "i-cache-size", NULL);
+			sizep = of_get_property(np, "i-cache-size", NULL);
 			if (sizep != NULL)
 				size = *sizep;
-			lsizep = get_property(np, ic, NULL);
+			lsizep = of_get_property(np, ic, NULL);
 			if (lsizep != NULL)
 				lsize = *lsizep;
 			if (sizep == 0 || lsizep == 0)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 924d692bc8f9..d8e503b2e1af 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -428,10 +428,6 @@ void generic_mach_cpu_die(void)
 	smp_wmb();
 	while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
 		cpu_relax();
-
-#ifdef CONFIG_PPC64
-	flush_tlb_pending();
-#endif
 	cpu_set(cpu, cpu_online_map);
 	local_irq_enable();
 }
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 673e8d9df7f5..047246ad4f65 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -53,10 +53,6 @@
 #include <asm/ppc-pci.h>
 #include <asm/syscalls.h>
 
-/* readdir & getdents */
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
-#define ROUND_UP(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
-
 struct old_linux_dirent32 {
 	u32		d_ino;
 	u32		d_offset;
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index d57818aea081..933e214c33e8 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -66,16 +66,17 @@ static int __init smt_setup(void)
 	if (!cpu_has_feature(CPU_FTR_SMT))
 		return -ENODEV;
 
-	options = find_path_device("/options");
+	options = of_find_node_by_path("/options");
 	if (!options)
 		return -ENODEV;
 
-	val = get_property(options, "ibm,smt-snooze-delay", NULL);
+	val = of_get_property(options, "ibm,smt-snooze-delay", NULL);
 	if (!smt_snooze_cmdline && val) {
 		for_each_possible_cpu(cpu)
 			per_cpu(smt_snooze_delay, cpu) = *val;
 	}
 
+	of_node_put(options);
 	return 0;
 }
 __initcall(smt_setup);
@@ -189,12 +190,12 @@ SYSFS_PMCSETUP(purr, SPRN_PURR);
 SYSFS_PMCSETUP(spurr, SPRN_SPURR);
 SYSFS_PMCSETUP(dscr, SPRN_DSCR);
 
-SYSFS_PMCSETUP(pa6t_pmc0, PA6T_SPRN_PMC0);
-SYSFS_PMCSETUP(pa6t_pmc1, PA6T_SPRN_PMC1);
-SYSFS_PMCSETUP(pa6t_pmc2, PA6T_SPRN_PMC2);
-SYSFS_PMCSETUP(pa6t_pmc3, PA6T_SPRN_PMC3);
-SYSFS_PMCSETUP(pa6t_pmc4, PA6T_SPRN_PMC4);
-SYSFS_PMCSETUP(pa6t_pmc5, PA6T_SPRN_PMC5);
+SYSFS_PMCSETUP(pa6t_pmc0, SPRN_PA6T_PMC0);
+SYSFS_PMCSETUP(pa6t_pmc1, SPRN_PA6T_PMC1);
+SYSFS_PMCSETUP(pa6t_pmc2, SPRN_PA6T_PMC2);
+SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3);
+SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4);
+SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5);
 
 
 static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index f6f0c6b07c4c..7cedef8f5f70 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -834,7 +834,7 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
 	cpu = of_find_node_by_type(NULL, "cpu");
 
 	if (cpu) {
-		fp = get_property(cpu, name, NULL);
+		fp = of_get_property(cpu, name, NULL);
 		if (fp) {
 			found = 1;
 			*val = of_read_ulong(fp, cells);
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index dcc6f159fd94..f7862224fe85 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -90,51 +90,80 @@ EXPORT_SYMBOL(unregister_die_notifier);
  * Trap & Exception support
  */
 
-static DEFINE_SPINLOCK(die_lock);
+#ifdef CONFIG_PMAC_BACKLIGHT
+static void pmac_backlight_unblank(void)
+{
+	mutex_lock(&pmac_backlight_mutex);
+	if (pmac_backlight) {
+		struct backlight_properties *props;
+
+		props = &pmac_backlight->props;
+		props->brightness = props->max_brightness;
+		props->power = FB_BLANK_UNBLANK;
+		backlight_update_status(pmac_backlight);
+	}
+	mutex_unlock(&pmac_backlight_mutex);
+}
+#else
+static inline void pmac_backlight_unblank(void) { }
+#endif
 
 int die(const char *str, struct pt_regs *regs, long err)
 {
+	static struct {
+		spinlock_t lock;
+		u32 lock_owner;
+		int lock_owner_depth;
+	} die = {
+		.lock =			__SPIN_LOCK_UNLOCKED(die.lock),
+		.lock_owner =		-1,
+		.lock_owner_depth =	0
+	};
 	static int die_counter;
+	unsigned long flags;
 
 	if (debugger(regs))
 		return 1;
 
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	bust_spinlocks(1);
-#ifdef CONFIG_PMAC_BACKLIGHT
-	mutex_lock(&pmac_backlight_mutex);
-	if (machine_is(powermac) && pmac_backlight) {
-		struct backlight_properties *props;
+	oops_enter();
 
-		down(&pmac_backlight->sem);
-		props = pmac_backlight->props;
-		props->brightness = props->max_brightness;
-		props->power = FB_BLANK_UNBLANK;
-		props->update_status(pmac_backlight);
-		up(&pmac_backlight->sem);
+	if (die.lock_owner != raw_smp_processor_id()) {
+		console_verbose();
+		spin_lock_irqsave(&die.lock, flags);
+		die.lock_owner = smp_processor_id();
+		die.lock_owner_depth = 0;
+		bust_spinlocks(1);
+		if (machine_is(powermac))
+			pmac_backlight_unblank();
+	} else {
+		local_save_flags(flags);
 	}
-	mutex_unlock(&pmac_backlight_mutex);
-#endif
-	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+
+	if (++die.lock_owner_depth < 3) {
+		printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
 #ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
+		printk("PREEMPT ");
 #endif
 #ifdef CONFIG_SMP
-	printk("SMP NR_CPUS=%d ", NR_CPUS);
+		printk("SMP NR_CPUS=%d ", NR_CPUS);
 #endif
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC ");
+		printk("DEBUG_PAGEALLOC ");
 #endif
 #ifdef CONFIG_NUMA
-	printk("NUMA ");
+		printk("NUMA ");
 #endif
-	printk("%s\n", ppc_md.name ? "" : ppc_md.name);
+		printk("%s\n", ppc_md.name ? ppc_md.name : "");
+
+		print_modules();
+		show_regs(regs);
+	} else {
+		printk("Recursive die() failure, output suppressed\n");
+	}
 
-	print_modules();
-	show_regs(regs);
 	bust_spinlocks(0);
-	spin_unlock_irq(&die_lock);
+	die.lock_owner = -1;
+	spin_unlock_irqrestore(&die.lock, flags);
 
 	if (kexec_should_crash(current) ||
 		kexec_sr_activated(smp_processor_id()))
@@ -147,6 +176,7 @@ int die(const char *str, struct pt_regs *regs, long err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
+	oops_exit();
 	do_exit(err);
 
 	return 0;
diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c
index e738f93b42fe..a963f657222b 100644
--- a/arch/powerpc/kernel/udbg_16550.c
+++ b/arch/powerpc/kernel/udbg_16550.c
@@ -184,7 +184,7 @@ void udbg_pas_real_putc(char c)
 
 void udbg_init_pas_realmode(void)
 {
-	udbg_comport = (volatile struct NS16550 __iomem *)0xfcff03f8;
+	udbg_comport = (volatile struct NS16550 __iomem *)0xfcff03f8UL;
 
 	udbg_putc = udbg_pas_real_putc;
 	udbg_getc = NULL;
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 2968ffeafdb6..9eaefac5053f 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -81,7 +81,7 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 		struct iommu_table *tbl;
 		unsigned long offset, size;
 
-		dma_window = get_property(dev->dev.archdata.of_node,
+		dma_window = of_get_property(dev->dev.archdata.of_node,
 					  "ibm,my-dma-window", NULL);
 		if (!dma_window)
 			return NULL;
@@ -226,7 +226,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
 		return NULL;
 	}
 
-	unit_address = get_property(of_node, "reg", NULL);
+	unit_address = of_get_property(of_node, "reg", NULL);
 	if (unit_address == NULL) {
 		printk(KERN_WARNING "%s: node %s missing 'reg'\n",
 				__FUNCTION__,
@@ -246,7 +246,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node)
 	viodev->type = of_node->type;
 	viodev->unit_address = *unit_address;
 	if (firmware_has_feature(FW_FEATURE_ISERIES)) {
-		unit_address = get_property(of_node,
+		unit_address = of_get_property(of_node,
 				"linux,unit_address", NULL);
 		if (unit_address != NULL)
 			viodev->unit_address = *unit_address;
@@ -308,7 +308,7 @@ static int __init vio_bus_init(void)
 		return err;
 	}
 
-	node_vroot = find_devices("vdevice");
+	node_vroot = of_find_node_by_name(NULL, "vdevice");
 	if (node_vroot) {
 		struct device_node *of_node;
 
@@ -322,6 +322,7 @@ static int __init vio_bus_init(void)
 					__FUNCTION__, of_node);
 			vio_register_device_node(of_node);
 		}
+		of_node_put(node_vroot);
 	}
 
 	return 0;
@@ -377,7 +378,7 @@ static int vio_hotplug(struct device *dev, char **envp, int num_envp,
 	dn = dev->archdata.of_node;
 	if (!dn)
 		return -ENODEV;
-	cp = get_property(dn, "compatible", &length);
+	cp = of_get_property(dn, "compatible", &length);
 	if (!cp)
 		return -ENODEV;
 
@@ -406,12 +407,12 @@ struct bus_type vio_bus_type = {
  * @which:	The property/attribute to be extracted.
  * @length:	Pointer to length of returned data size (unused if NULL).
  *
- * Calls prom.c's get_property() to return the value of the
+ * Calls prom.c's of_get_property() to return the value of the
  * attribute specified by @which
 */
 const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
 {
-	return get_property(vdev->dev.archdata.of_node, which, length);
+	return of_get_property(vdev->dev.archdata.of_node, which, length);
 }
 EXPORT_SYMBOL(vio_get_attribute);
 
@@ -443,7 +444,7 @@ struct vio_dev *vio_find_node(struct device_node *vnode)
 	char kobj_name[BUS_ID_SIZE];
 
 	/* construct the kobject name from the device node */
-	unit_address = get_property(vnode, "reg", NULL);
+	unit_address = of_get_property(vnode, "reg", NULL);
 	if (!unit_address)
 		return NULL;
 	snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 4b1ba49fbd9e..450258de7ca1 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -7,13 +7,12 @@ EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
 
 ifeq ($(CONFIG_PPC_MERGE),y)
-obj-y			:= string.o strcase.o
+obj-y			:= string.o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o checksum_32.o
 endif
 
 obj-$(CONFIG_PPC64)	+= checksum_64.o copypage_64.o copyuser_64.o \
-			   memcpy_64.o usercopy_64.o mem_64.o string.o \
-			   strcase.o
+			   memcpy_64.o usercopy_64.o mem_64.o string.o
 obj-$(CONFIG_QUICC_ENGINE) += rheap.o
 obj-$(CONFIG_XMON)	+= sstep.o
 obj-$(CONFIG_KPROBES)	+= sstep.o
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index a6b54cb97c49..25ec5378afa4 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -24,7 +24,7 @@ _GLOBAL(__copy_tofrom_user)
 	dcbt	0,r4
 	beq	.Lcopy_page_4K
 	andi.	r6,r6,7
-	mtcrf	0x01,r5
+	PPC_MTOCRF	0x01,r5
 	blt	cr1,.Lshort_copy
 	bne	.Ldst_unaligned
 .Ldst_aligned:
@@ -135,7 +135,7 @@ _GLOBAL(__copy_tofrom_user)
 	b	.Ldo_tail
 
 .Ldst_unaligned:
-	mtcrf	0x01,r6		/* put #bytes to 8B bdry into cr7 */
+	PPC_MTOCRF	0x01,r6		/* put #bytes to 8B bdry into cr7 */
 	subf	r5,r6,r5
 	li	r7,0
 	cmpldi	r1,r5,16
@@ -150,7 +150,7 @@ _GLOBAL(__copy_tofrom_user)
 2:	bf	cr7*4+1,3f
 37:	lwzx	r0,r7,r4
 83:	stwx	r0,r7,r3
-3:	mtcrf	0x01,r5
+3:	PPC_MTOCRF	0x01,r5
 	add	r4,r6,r4
 	add	r3,r6,r3
 	b	.Ldst_aligned
diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c
index 80b482ca30df..79d0fa3a470d 100644
--- a/arch/powerpc/lib/locks.c
+++ b/arch/powerpc/lib/locks.c
@@ -43,9 +43,11 @@ void __spin_yield(raw_spinlock_t *lock)
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc,
 			((u64)holder_cpu << 32) | yield_count);
+#ifdef CONFIG_PPC_SPLPAR
 	else
 		plpar_hcall_norets(H_CONFER,
 			get_hard_smp_processor_id(holder_cpu), yield_count);
+#endif
 }
 
 /*
@@ -72,9 +74,11 @@ void __rw_yield(raw_rwlock_t *rw)
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc,
 			((u64)holder_cpu << 32) | yield_count);
+#ifdef CONFIG_PPC_SPLPAR
 	else
 		plpar_hcall_norets(H_CONFER,
 			get_hard_smp_processor_id(holder_cpu), yield_count);
+#endif
 }
 #endif
 
diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S
index 68df20283ff5..11ce045e21fd 100644
--- a/arch/powerpc/lib/mem_64.S
+++ b/arch/powerpc/lib/mem_64.S
@@ -19,7 +19,7 @@ _GLOBAL(memset)
 	rlwimi	r4,r4,16,0,15
 	cmplw	cr1,r5,r0		/* do we get that far? */
 	rldimi	r4,r4,32,0
-	mtcrf	1,r0
+	PPC_MTOCRF	1,r0
 	mr	r6,r3
 	blt	cr1,8f
 	beq+	3f			/* if already 8-byte aligned */
@@ -49,7 +49,7 @@ _GLOBAL(memset)
 	bdnz	4b
 5:	srwi.	r0,r5,3
 	clrlwi	r5,r5,29
-	mtcrf	1,r0
+	PPC_MTOCRF	1,r0
 	beq	8f
 	bf	29,6f
 	std	r4,0(r6)
@@ -65,7 +65,7 @@ _GLOBAL(memset)
 	std	r4,0(r6)
 	addi	r6,r6,8
 8:	cmpwi	r5,0
-	mtcrf	1,r5
+	PPC_MTOCRF	1,r5
 	beqlr+
 	bf	29,9f
 	stw	r4,0(r6)
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 7173ba98f427..3f131129d1c1 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -12,7 +12,7 @@
 	.align	7
 _GLOBAL(memcpy)
 	std	r3,48(r1)	/* save destination pointer for return value */
-	mtcrf	0x01,r5
+	PPC_MTOCRF	0x01,r5
 	cmpldi	cr1,r5,16
 	neg	r6,r3		# LS 3 bits = # bytes to 8-byte dest bdry
 	andi.	r6,r6,7
@@ -128,7 +128,7 @@ _GLOBAL(memcpy)
 	b	.Ldo_tail
 
 .Ldst_unaligned:
-	mtcrf	0x01,r6		# put #bytes to 8B bdry into cr7
+	PPC_MTOCRF	0x01,r6		# put #bytes to 8B bdry into cr7
 	subf	r5,r6,r5
 	li	r7,0
 	cmpldi	r1,r5,16
@@ -143,7 +143,7 @@ _GLOBAL(memcpy)
 2:	bf	cr7*4+1,3f
 	lwzx	r0,r7,r4
 	stwx	r0,r7,r3
-3:	mtcrf	0x01,r5
+3:	PPC_MTOCRF	0x01,r5
 	add	r4,r6,r4
 	add	r3,r6,r3
 	b	.Ldst_aligned
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 7e8ded051b5b..4aae0c387645 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -54,7 +54,7 @@ static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs)
  */
 int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 {
-	unsigned int opcode, rd;
+	unsigned int opcode, rs, rb, rd, spr;
 	unsigned long int imm;
 
 	opcode = instr >> 26;
@@ -152,6 +152,49 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 				regs->nip &= 0xffffffffUL;
 			return 1;
 #endif
+		case 0x26:	/* mfcr */
+			regs->gpr[rd] = regs->ccr;
+			regs->gpr[rd] &= 0xffffffffUL;
+			goto mtspr_out;
+		case 0x2a6:	/* mfspr */
+			spr = (instr >> 11) & 0x3ff;
+			switch (spr) {
+			case 0x20:	/* mfxer */
+				regs->gpr[rd] = regs->xer;
+				regs->gpr[rd] &= 0xffffffffUL;
+				goto mtspr_out;
+			case 0x100:	/* mflr */
+				regs->gpr[rd] = regs->link;
+				goto mtspr_out;
+			case 0x120:	/* mfctr */
+				regs->gpr[rd] = regs->ctr;
+				goto mtspr_out;
+			}
+			break;
+		case 0x378:	/* orx */
+			rs = (instr >> 21) & 0x1f;
+			rb = (instr >> 11) & 0x1f;
+			if (rs == rb) {		/* mr */
+				rd = (instr >> 16) & 0x1f;
+				regs->gpr[rd] = regs->gpr[rs];
+				goto mtspr_out;
+			}
+			break;
+		case 0x3a6:	/* mtspr */
+			spr = (instr >> 11) & 0x3ff;
+			switch (spr) {
+			case 0x20:	/* mtxer */
+				regs->xer = (regs->gpr[rd] & 0xffffffffUL);
+				goto mtspr_out;
+			case 0x100:	/* mtlr */
+				regs->link = regs->gpr[rd];
+				goto mtspr_out;
+			case 0x120:	/* mtctr */
+				regs->ctr = regs->gpr[rd];
+mtspr_out:
+				regs->nip += 4;
+				return 1;
+			}
 		}
 	}
 	return 0;
diff --git a/arch/powerpc/lib/strcase.c b/arch/powerpc/lib/strcase.c
deleted file mode 100644
index f8ec1eba3fdd..000000000000
--- a/arch/powerpc/lib/strcase.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-
-int strcasecmp(const char *s1, const char *s2)
-{
-	int c1, c2;
-
-	do {
-		c1 = tolower(*s1++);
-		c2 = tolower(*s2++);
-	} while (c1 == c2 && c1 != 0);
-	return c1 - c2;
-}
-
-int strncasecmp(const char *s1, const char *s2, size_t n)
-{
-	int c1, c2;
-
-	do {
-		c1 = tolower(*s1++);
-		c2 = tolower(*s2++);
-	} while ((--n > 0) && c1 == c2 && c1 != 0);
-	return c1 - c2;
-}
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index bd68df5fa78a..ddceefc06ecc 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -283,6 +283,7 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64)
 #define PTEG_SIZE	64
 #define LG_PTEG_SIZE	6
 #define LDPTEu		lwzu
+#define LDPTE		lwz
 #define STPTE		stw
 #define CMPPTE		cmpw
 #define PTE_H		0x40
@@ -389,13 +390,30 @@ _GLOBAL(hash_page_patch_C)
 	 * and we know there is a definite (although small) speed
 	 * advantage to putting the PTE in the primary PTEG, we always
 	 * put the PTE in the primary PTEG.
+	 *
+	 * In addition, we skip any slot that is mapping kernel text in
+	 * order to avoid a deadlock when not using BAT mappings if
+	 * trying to hash in the kernel hash code itself after it has
+	 * already taken the hash table lock. This works in conjunction
+	 * with pre-faulting of the kernel text.
+	 *
+	 * If the hash table bucket is full of kernel text entries, we'll
+	 * lockup here but that shouldn't happen
 	 */
-	addis	r4,r7,next_slot@ha
+
+1:	addis	r4,r7,next_slot@ha		/* get next evict slot */
 	lwz	r6,next_slot@l(r4)
-	addi	r6,r6,PTE_SIZE
+	addi	r6,r6,PTE_SIZE			/* search for candidate */
 	andi.	r6,r6,7*PTE_SIZE
 	stw	r6,next_slot@l(r4)
 	add	r4,r3,r6
+	LDPTE	r0,PTE_SIZE/2(r4)		/* get PTE second word */
+	clrrwi	r0,r0,12
+	lis	r6,etext@h
+	ori	r6,r6,etext@l			/* get etext */
+	tophys(r6,r6)
+	cmpl	cr0,r0,r6			/* compare and try again */
+	blt	1b
 
 #ifndef CONFIG_SMP
 	/* Store PTE in PTEG */
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 9bc0a9c2b9bc..e64ce3eec36e 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -445,9 +445,12 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 
 htab_insert_pte:
 	/* real page number in r5, PTE RPN value + index */
-	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
+	andis.	r0,r31,_PAGE_4K_PFN@h
+	srdi	r5,r31,PTE_RPN_SHIFT
+	bne-	htab_special_pfn
 	sldi	r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT
 	add	r5,r5,r25
+htab_special_pfn:
 	sldi	r5,r5,HW_PAGE_SHIFT
 
 	/* Calculate primary group hash */
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 6f1016acdbf6..79aedaf36f2b 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -505,7 +505,7 @@ static inline int tlb_batching_enabled(void)
 	int enabled = 1;
 
 	if (root) {
-		const char *model = get_property(root, "model", NULL);
+		const char *model = of_get_property(root, "model", NULL);
 		if (model && !strcmp(model, "IBM,9076-N81"))
 			enabled = 0;
 		of_node_put(root);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index c0d2a694fa30..49618461defb 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -100,6 +100,11 @@ unsigned int HPAGE_SHIFT;
 #ifdef CONFIG_PPC_64K_PAGES
 int mmu_ci_restrictions;
 #endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+static u8 *linear_map_hash_slots;
+static unsigned long linear_map_hash_count;
+static spinlock_t linear_map_hash_lock;
+#endif /* CONFIG_DEBUG_PAGEALLOC */
 
 /* There are definitions of page sizes arrays to be used when none
  * is provided by the firmware.
@@ -152,11 +157,10 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 
 	for (vaddr = vstart, paddr = pstart; vaddr < vend;
 	     vaddr += step, paddr += step) {
-		unsigned long vpn, hash, hpteg;
+		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr);
 		unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff);
 
-		vpn = va >> shift;
 		tmp_mode = mode;
 		
 		/* Make non-kernel text non-executable */
@@ -174,6 +178,10 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 
 		if (ret < 0)
 			break;
+#ifdef CONFIG_DEBUG_PAGEALLOC
+		if ((paddr >> PAGE_SHIFT) < linear_map_hash_count)
+			linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80;
+#endif /* CONFIG_DEBUG_PAGEALLOC */
 	}
 	return ret < 0 ? ret : 0;
 }
@@ -281,6 +289,7 @@ static void __init htab_init_page_sizes(void)
 		memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
 		       sizeof(mmu_psize_defaults_gp));
  found:
+#ifndef CONFIG_DEBUG_PAGEALLOC
 	/*
 	 * Pick a size for the linear mapping. Currently, we only support
 	 * 16M, 1M and 4K which is the default
@@ -289,6 +298,7 @@ static void __init htab_init_page_sizes(void)
 		mmu_linear_psize = MMU_PAGE_16M;
 	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
 		mmu_linear_psize = MMU_PAGE_1M;
+#endif /* CONFIG_DEBUG_PAGEALLOC */
 
 #ifdef CONFIG_PPC_64K_PAGES
 	/*
@@ -303,12 +313,14 @@ static void __init htab_init_page_sizes(void)
 	if (mmu_psize_defs[MMU_PAGE_64K].shift) {
 		mmu_virtual_psize = MMU_PAGE_64K;
 		mmu_vmalloc_psize = MMU_PAGE_64K;
+		if (mmu_linear_psize == MMU_PAGE_4K)
+			mmu_linear_psize = MMU_PAGE_64K;
 		if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
 			mmu_io_psize = MMU_PAGE_64K;
 		else
 			mmu_ci_restrictions = 1;
 	}
-#endif
+#endif /* CONFIG_PPC_64K_PAGES */
 
 	printk(KERN_DEBUG "Page orders: linear mapping = %d, "
 	       "virtual = %d, io = %d\n",
@@ -476,6 +488,13 @@ void __init htab_initialize(void)
 
 	mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
+						    1, lmb.rmo_size));
+	memset(linear_map_hash_slots, 0, linear_map_hash_count);
+#endif /* CONFIG_DEBUG_PAGEALLOC */
+
 	/* On U3 based machines, we need to reserve the DART area and
 	 * _NOT_ map it to avoid cache paradoxes as it's remapped non
 	 * cacheable later on
@@ -573,6 +592,27 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 	return pp;
 }
 
+/*
+ * Demote a segment to using 4k pages.
+ * For now this makes the whole process use 4k pages.
+ */
+void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
+{
+#ifdef CONFIG_PPC_64K_PAGES
+	if (mm->context.user_psize == MMU_PAGE_4K)
+		return;
+	mm->context.user_psize = MMU_PAGE_4K;
+	mm->context.sllp = SLB_VSID_USER | mmu_psize_defs[MMU_PAGE_4K].sllp;
+	get_paca()->context = mm->context;
+	slb_flush_and_rebolt();
+#ifdef CONFIG_SPE_BASE
+	spu_flush_all_slbs(mm);
+#endif
+#endif
+}
+
+EXPORT_SYMBOL_GPL(demote_segment_4k);
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -665,15 +705,19 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 #ifndef CONFIG_PPC_64K_PAGES
 	rc = __hash_page_4K(ea, access, vsid, ptep, trap, local);
 #else
+	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
+	if (pte_val(*ptep) & _PAGE_4K_PFN) {
+		demote_segment_4k(mm, ea);
+		psize = MMU_PAGE_4K;
+	}
+
 	if (mmu_ci_restrictions) {
 		/* If this PTE is non-cacheable, switch to 4k */
 		if (psize == MMU_PAGE_64K &&
 		    (pte_val(*ptep) & _PAGE_NO_CACHE)) {
 			if (user_region) {
+				demote_segment_4k(mm, ea);
 				psize = MMU_PAGE_4K;
-				mm->context.user_psize = MMU_PAGE_4K;
-				mm->context.sllp = SLB_VSID_USER |
-					mmu_psize_defs[MMU_PAGE_4K].sllp;
 			} else if (ea < VMALLOC_END) {
 				/*
 				 * some driver did a non-cacheable mapping
@@ -685,6 +729,9 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 				       "non-cacheable mapping\n");
 				psize = mmu_vmalloc_psize = MMU_PAGE_4K;
 			}
+#ifdef CONFIG_SPE_BASE
+			spu_flush_all_slbs(mm);
+#endif
 		}
 		if (user_region) {
 			if (psize != get_paca()->context.user_psize) {
@@ -753,13 +800,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	if (mmu_ci_restrictions) {
 		/* If this PTE is non-cacheable, switch to 4k */
 		if (mm->context.user_psize == MMU_PAGE_64K &&
-		    (pte_val(*ptep) & _PAGE_NO_CACHE)) {
-			mm->context.user_psize = MMU_PAGE_4K;
-			mm->context.sllp = SLB_VSID_USER |
-				mmu_psize_defs[MMU_PAGE_4K].sllp;
-			get_paca()->context = mm->context;
-			slb_flush_and_rebolt();
-		}
+		    (pte_val(*ptep) & _PAGE_NO_CACHE))
+			demote_segment_4k(mm, ea);
 	}
 	if (mm->context.user_psize == MMU_PAGE_64K)
 		__hash_page_64K(ea, access, vsid, ptep, trap, local);
@@ -819,3 +861,62 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address)
 	}
 	bad_page_fault(regs, address, SIGBUS);
 }
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
+{
+	unsigned long hash, hpteg, vsid = get_kernel_vsid(vaddr);
+	unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff);
+	unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY |
+		_PAGE_COHERENT | PP_RWXX | HPTE_R_N;
+	int ret;
+
+	hash = hpt_hash(va, PAGE_SHIFT);
+	hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+
+	ret = ppc_md.hpte_insert(hpteg, va, __pa(vaddr),
+				 mode, HPTE_V_BOLTED, mmu_linear_psize);
+	BUG_ON (ret < 0);
+	spin_lock(&linear_map_hash_lock);
+	BUG_ON(linear_map_hash_slots[lmi] & 0x80);
+	linear_map_hash_slots[lmi] = ret | 0x80;
+	spin_unlock(&linear_map_hash_lock);
+}
+
+static void kernel_unmap_linear_page(unsigned long vaddr, unsigned long lmi)
+{
+	unsigned long hash, hidx, slot, vsid = get_kernel_vsid(vaddr);
+	unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff);
+
+	hash = hpt_hash(va, PAGE_SHIFT);
+	spin_lock(&linear_map_hash_lock);
+	BUG_ON(!(linear_map_hash_slots[lmi] & 0x80));
+	hidx = linear_map_hash_slots[lmi] & 0x7f;
+	linear_map_hash_slots[lmi] = 0;
+	spin_unlock(&linear_map_hash_lock);
+	if (hidx & _PTEIDX_SECONDARY)
+		hash = ~hash;
+	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+	slot += hidx & _PTEIDX_GROUP_IX;
+	ppc_md.hpte_invalidate(slot, va, mmu_linear_psize, 0);
+}
+
+void kernel_map_pages(struct page *page, int numpages, int enable)
+{
+	unsigned long flags, vaddr, lmi;
+	int i;
+
+	local_irq_save(flags);
+	for (i = 0; i < numpages; i++, page++) {
+		vaddr = (unsigned long)page_address(page);
+		lmi = __pa(vaddr) >> PAGE_SHIFT;
+		if (lmi >= linear_map_hash_count)
+			continue;
+		if (enable)
+			kernel_map_linear_page(vaddr, lmi);
+		else
+			kernel_unmap_linear_page(vaddr, lmi);
+	}
+	local_irq_restore(flags);
+}
+#endif /* CONFIG_DEBUG_PAGEALLOC */
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 8c77c791f87e..8508f973d9cc 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -24,6 +24,7 @@
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/tlb.h>
+#include <asm/spu.h>
 
 #include <linux/sysctl.h>
 
@@ -315,12 +316,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 {
 	if (pte_present(*ptep)) {
 		/* We open-code pte_clear because we need to pass the right
-		 * argument to hpte_update (huge / !huge)
+		 * argument to hpte_need_flush (huge / !huge). Might not be
+		 * necessary anymore if we make hpte_need_flush() get the
+		 * page size from the slices
 		 */
-		unsigned long old = pte_update(ptep, ~0UL);
-		if (old & _PAGE_HASHPTE)
-			hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
-		flush_tlb_pending();
+		pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1);
 	}
 	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
@@ -328,12 +328,7 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep)
 {
-	unsigned long old = pte_update(ptep, ~0UL);
-
-	if (old & _PAGE_HASHPTE)
-		hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1);
-	*ptep = __pte(0);
-
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
 	return __pte(old);
 }
 
@@ -513,6 +508,9 @@ int prepare_hugepage_range(unsigned long addr, unsigned long len, pgoff_t pgoff)
 	if ((addr + len) > 0x100000000UL)
 		err = open_high_hpage_areas(current->mm,
 					    HTLB_AREA_MASK(addr, len));
+#ifdef CONFIG_SPE_BASE
+	spu_flush_all_slbs(current->mm);
+#endif
 	if (err) {
 		printk(KERN_DEBUG "prepare_hugepage_range(%lx, %lx)"
 		       " failed (lowmask: 0x%04hx, highmask: 0x%04hx)\n",
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 0e53ca8f02fb..5fce6ccecb8d 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -115,6 +115,10 @@ void MMU_setup(void)
 	if (strstr(cmd_line, "noltlbs")) {
 		__map_without_ltlbs = 1;
 	}
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	__map_without_bats = 1;
+	__map_without_ltlbs = 1;
+#endif
 }
 
 /*
diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c
index 716a2906a24d..e3a1e8dc536a 100644
--- a/arch/powerpc/mm/lmb.c
+++ b/arch/powerpc/mm/lmb.c
@@ -146,6 +146,10 @@ static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
 		unsigned long rgnbase = rgn->region[i].base;
 		unsigned long rgnsize = rgn->region[i].size;
 
+		if ((rgnbase == base) && (rgnsize == size))
+			/* Already have this region, so we're done */
+			return 0;
+
 		adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
 		if ( adjacent > 0 ) {
 			rgn->region[i].base -= size;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 52f397c108a7..c4bcd7546424 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -58,9 +58,6 @@ int init_bootmem_done;
 int mem_init_done;
 unsigned long memory_limit;
 
-extern void hash_preload(struct mm_struct *mm, unsigned long ea,
-			 unsigned long access, unsigned long trap);
-
 int page_is_ram(unsigned long pfn)
 {
 	unsigned long paddr = (pfn << PAGE_SHIFT);
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index bea2d21ac6f7..9c4538bb04b0 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -19,9 +19,14 @@
  *  2 of the License, or (at your option) any later version.
  *
  */
+#include <linux/mm.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu.h>
 
+extern void hash_preload(struct mm_struct *mm, unsigned long ea,
+			 unsigned long access, unsigned long trap);
+
+
 #ifdef CONFIG_PPC32
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 262790910ff2..b3a592b25ab3 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -74,7 +74,7 @@ static struct device_node * __cpuinit find_cpu_node(unsigned int cpu)
 
 	while ((cpu_node = of_find_node_by_type(cpu_node, "cpu")) != NULL) {
 		/* Try interrupt server first */
-		interrupt_server = get_property(cpu_node,
+		interrupt_server = of_get_property(cpu_node,
 					"ibm,ppc-interrupt-server#s", &len);
 
 		len = len / sizeof(u32);
@@ -85,7 +85,7 @@ static struct device_node * __cpuinit find_cpu_node(unsigned int cpu)
 					return cpu_node;
 			}
 		} else {
-			reg = get_property(cpu_node, "reg", &len);
+			reg = of_get_property(cpu_node, "reg", &len);
 			if (reg && (len > 0) && (reg[0] == hw_cpuid))
 				return cpu_node;
 		}
@@ -97,7 +97,7 @@ static struct device_node * __cpuinit find_cpu_node(unsigned int cpu)
 /* must hold reference to node during call */
 static const int *of_get_associativity(struct device_node *dev)
 {
-	return get_property(dev, "ibm,associativity", NULL);
+	return of_get_property(dev, "ibm,associativity", NULL);
 }
 
 /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
@@ -154,7 +154,7 @@ EXPORT_SYMBOL_GPL(of_node_to_nid);
  * characteristics relative to its multiple connections.  We ignore
  * this for now.  We also assume that all cpu and memory sets have
  * their distances represented at a common level.  This won't be
- * true for heirarchical NUMA.
+ * true for hierarchical NUMA.
  *
  * In any case the ibm,associativity-reference-points should give
  * the correct depth for a normal NUMA system.
@@ -179,7 +179,7 @@ static int __init find_min_common_depth(void)
 	 * configuration (should be all 0's) and the second is for a normal
 	 * NUMA configuration.
 	 */
-	ref_points = get_property(rtas_root,
+	ref_points = of_get_property(rtas_root,
 			"ibm,associativity-reference-points", &len);
 
 	if ((len >= 1) && ref_points) {
@@ -201,8 +201,8 @@ static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
 	if (!memory)
 		panic("numa.c: No memory nodes found!");
 
-	*n_addr_cells = prom_n_addr_cells(memory);
-	*n_size_cells = prom_n_size_cells(memory);
+	*n_addr_cells = of_n_addr_cells(memory);
+	*n_size_cells = of_n_size_cells(memory);
 	of_node_put(memory);
 }
 
@@ -308,9 +308,9 @@ static void __init parse_drconf_memory(struct device_node *memory)
 	int nid, default_nid = 0;
 	unsigned int start, ai, flags;
 
-	lm = get_property(memory, "ibm,lmb-size", &ls);
-	dm = get_property(memory, "ibm,dynamic-memory", &ld);
-	aa = get_property(memory, "ibm,associativity-lookup-arrays", &la);
+	lm = of_get_property(memory, "ibm,lmb-size", &ls);
+	dm = of_get_property(memory, "ibm,dynamic-memory", &ld);
+	aa = of_get_property(memory, "ibm,associativity-lookup-arrays", &la);
 	if (!lm || !dm || !aa ||
 	    ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
 	    la < 2 * sizeof(unsigned int))
@@ -404,10 +404,10 @@ static int __init parse_numa_properties(void)
 		const unsigned int *memcell_buf;
 		unsigned int len;
 
-		memcell_buf = get_property(memory,
+		memcell_buf = of_get_property(memory,
 			"linux,usable-memory", &len);
 		if (!memcell_buf || len <= 0)
-			memcell_buf = get_property(memory, "reg", &len);
+			memcell_buf = of_get_property(memory, "reg", &len);
 		if (!memcell_buf || len <= 0)
 			continue;
 
@@ -725,7 +725,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
 		const unsigned int *memcell_buf;
 		unsigned int len;
 
-		memcell_buf = get_property(memory, "reg", &len);
+		memcell_buf = of_get_property(memory, "reg", &len);
 		if (!memcell_buf || len <= 0)
 			continue;
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index c284bdac9947..bca560374927 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -183,8 +183,8 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
 	if (mem_init_done && (p < virt_to_phys(high_memory))) {
-		printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
-		       __builtin_return_address(0));
+		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
+		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
 	}
 
@@ -266,9 +266,12 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 	pg = pte_alloc_kernel(pd, va);
 	if (pg != 0) {
 		err = 0;
-		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
-		if (mem_init_done)
-			flush_HPTE(0, va, pmd_val(*pd));
+		/* The PTE should never be already set nor present in the
+		 * hash table
+		 */
+		BUG_ON(pte_val(*pg) & (_PAGE_PRESENT | _PAGE_HASHPTE));
+		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
+						     __pgprot(flags)));
 	}
 	return err;
 }
@@ -279,16 +282,19 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 void __init mapin_ram(void)
 {
 	unsigned long v, p, s, f;
+	int ktext;
 
 	s = mmu_mapin_ram();
 	v = KERNELBASE + s;
 	p = PPC_MEMSTART + s;
 	for (; s < total_lowmem; s += PAGE_SIZE) {
-		if ((char *) v >= _stext && (char *) v < etext)
-			f = _PAGE_RAM_TEXT;
-		else
-			f = _PAGE_RAM;
+		ktext = ((char *) v >= _stext && (char *) v < etext);
+		f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
 		map_page(v, p, f);
+#ifdef CONFIG_PPC_STD_MMU_32
+		if (ktext)
+			hash_preload(&init_mm, v, 0, 0x300);
+#endif
 		v += PAGE_SIZE;
 		p += PAGE_SIZE;
 	}
@@ -445,3 +451,55 @@ exit:
 	return ret;
 }
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+
+static int __change_page_attr(struct page *page, pgprot_t prot)
+{
+	pte_t *kpte;
+	pmd_t *kpmd;
+	unsigned long address;
+
+	BUG_ON(PageHighMem(page));
+	address = (unsigned long)page_address(page);
+
+	if (v_mapped_by_bats(address) || v_mapped_by_tlbcam(address))
+		return 0;
+	if (!get_pteptr(&init_mm, address, &kpte, &kpmd))
+		return -EINVAL;
+	set_pte_at(&init_mm, address, kpte, mk_pte(page, prot));
+	wmb();
+	flush_HPTE(0, address, pmd_val(*kpmd));
+	pte_unmap(kpte);
+
+	return 0;
+}
+
+/*
+ * Change the page attributes of an page in the linear mapping.
+ *
+ * THIS CONFLICTS WITH BAT MAPPINGS, DEBUG USE ONLY
+ */
+static int change_page_attr(struct page *page, int numpages, pgprot_t prot)
+{
+	int i, err = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	for (i = 0; i < numpages; i++, page++) {
+		err = __change_page_attr(page, prot);
+		if (err)
+			break;
+	}
+	local_irq_restore(flags);
+	return err;
+}
+
+
+void kernel_map_pages(struct page *page, int numpages, int enable)
+{
+	if (PageHighMem(page))
+		return;
+
+	change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0));
+}
+#endif /* CONFIG_DEBUG_PAGEALLOC */
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 16e4ee1c2318..1d443407423c 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -103,7 +103,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 		 *
 		 */
 		if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags,
-				      mmu_virtual_psize)) {
+				      mmu_io_psize)) {
 			printk(KERN_ERR "Failed to do bolted mapping IO "
 			       "memory at %016lx !\n", pa);
 			return -ENOMEM;
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 7cceb2c44cb9..05066674a7a0 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -85,8 +85,10 @@ unsigned long __init mmu_mapin_ram(void)
 	unsigned long max_size = (256<<20);
 	unsigned long align;
 
-	if (__map_without_bats)
+	if (__map_without_bats) {
+		printk(KERN_DEBUG "RAM mapped without BATs\n");
 		return 0;
+	}
 
 	/* Set up BAT2 and if necessary BAT3 to cover RAM. */
 
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index b58baa65c4a7..fd8d08c325eb 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -120,17 +120,20 @@ void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
 }
 
 /*
- * Update the MMU hash table to correspond with a change to
- * a Linux PTE.  If wrprot is true, it is permissible to
- * change the existing HPTE to read-only rather than removing it
- * (if we remove it we should clear the _PTE_HPTEFLAGS bits).
+ * A linux PTE was changed and the corresponding hash table entry
+ * neesd to be flushed. This function will either perform the flush
+ * immediately or will batch it up if the current CPU has an active
+ * batch on it.
+ *
+ * Must be called from within some kind of spinlock/non-preempt region...
  */
-void hpte_update(struct mm_struct *mm, unsigned long addr,
-		 pte_t *ptep, unsigned long pte, int huge)
+void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, unsigned long pte, int huge)
 {
 	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
-	unsigned long vsid;
+	unsigned long vsid, vaddr;
 	unsigned int psize;
+	real_pte_t rpte;
 	int i;
 
 	i = batch->index;
@@ -151,6 +154,26 @@ void hpte_update(struct mm_struct *mm, unsigned long addr,
 	} else
 		psize = pte_pagesize_index(pte);
 
+	/* Build full vaddr */
+	if (!is_kernel_addr(addr)) {
+		vsid = get_vsid(mm->context.id, addr);
+		WARN_ON(vsid == 0);
+	} else
+		vsid = get_kernel_vsid(addr);
+	vaddr = (vsid << 28 ) | (addr & 0x0fffffff);
+	rpte = __real_pte(__pte(pte), ptep);
+
+	/*
+	 * Check if we have an active batch on this CPU. If not, just
+	 * flush now and return. For now, we don global invalidates
+	 * in that case, might be worth testing the mm cpu mask though
+	 * and decide to use local invalidates instead...
+	 */
+	if (!batch->active) {
+		flush_hash_page(vaddr, rpte, psize, 0);
+		return;
+	}
+
 	/*
 	 * This can happen when we are in the middle of a TLB batch and
 	 * we encounter memory pressure (eg copy_page_range when it tries
@@ -162,47 +185,42 @@ void hpte_update(struct mm_struct *mm, unsigned long addr,
 	 * batch
 	 */
 	if (i != 0 && (mm != batch->mm || batch->psize != psize)) {
-		flush_tlb_pending();
+		__flush_tlb_pending(batch);
 		i = 0;
 	}
 	if (i == 0) {
 		batch->mm = mm;
 		batch->psize = psize;
 	}
-	if (!is_kernel_addr(addr)) {
-		vsid = get_vsid(mm->context.id, addr);
-		WARN_ON(vsid == 0);
-	} else
-		vsid = get_kernel_vsid(addr);
-	batch->vaddr[i] = (vsid << 28 ) | (addr & 0x0fffffff);
-	batch->pte[i] = __real_pte(__pte(pte), ptep);
+	batch->pte[i] = rpte;
+	batch->vaddr[i] = vaddr;
 	batch->index = ++i;
 	if (i >= PPC64_TLB_BATCH_NR)
-		flush_tlb_pending();
+		__flush_tlb_pending(batch);
 }
 
+/*
+ * This function is called when terminating an mmu batch or when a batch
+ * is full. It will perform the flush of all the entries currently stored
+ * in a batch.
+ *
+ * Must be called from within some kind of spinlock/non-preempt region...
+ */
 void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
 {
-	int i;
-	int cpu;
 	cpumask_t tmp;
-	int local = 0;
+	int i, local = 0;
 
-	BUG_ON(in_interrupt());
-
-	cpu = get_cpu();
 	i = batch->index;
-	tmp = cpumask_of_cpu(cpu);
+	tmp = cpumask_of_cpu(smp_processor_id());
 	if (cpus_equal(batch->mm->cpu_vm_mask, tmp))
 		local = 1;
-
 	if (i == 1)
 		flush_hash_page(batch->vaddr[0], batch->pte[0],
 				batch->psize, local);
 	else
 		flush_hash_range(i, local);
 	batch->index = 0;
-	put_cpu();
 }
 
 void pte_free_finish(void)
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index 4ccef2d5530c..4b5f9528218c 100644
--- a/arch/powerpc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -12,6 +12,6 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \
 
 oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
 oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o
-oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o
+oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
 oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
 oprofile-$(CONFIG_6xx) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index fbd62eacfdf4..1a7ef7e246d2 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -160,6 +160,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 		case PPC_OPROFILE_POWER4:
 			model = &op_model_power4;
 			break;
+		case PPC_OPROFILE_PA6T:
+			model = &op_model_pa6t;
+			break;
 #endif
 #ifdef CONFIG_6xx
 		case PPC_OPROFILE_G4:
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index e08e1d7b3dc5..626b29f38304 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -37,6 +37,7 @@
 #include <asm/system.h>
 
 #include "../platforms/cell/interrupt.h"
+#include "../platforms/cell/cbe_regs.h"
 
 #define PPU_CYCLES_EVENT_NUM 1	/*  event number for CYCLES */
 #define PPU_CYCLES_GRP_NUM   1  /* special group number for identifying
@@ -130,7 +131,7 @@ static int pm_rtas_token;
 static u32 reset_value[NR_PHYS_CTRS];
 static int num_counters;
 static int oprofile_running;
-static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(virt_cntr_lock);
 
 static u32 ctr_enabled;
 
diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c
new file mode 100644
index 000000000000..e8a56b0adadc
--- /dev/null
+++ b/arch/powerpc/oprofile/op_model_pa6t.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Shashi Rao, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/oprofile/op_model_power4.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/percpu.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/oprofile_impl.h>
+#include <asm/reg.h>
+
+static unsigned char oprofile_running;
+
+/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */
+static u64 mmcr0_val;
+static u64 mmcr1_val;
+
+/* inited in pa6t_reg_setup */
+static u64 reset_value[OP_MAX_COUNTER];
+
+static inline u64 ctr_read(unsigned int i)
+{
+	switch (i) {
+	case 0:
+		return mfspr(SPRN_PA6T_PMC0);
+	case 1:
+		return mfspr(SPRN_PA6T_PMC1);
+	case 2:
+		return mfspr(SPRN_PA6T_PMC2);
+	case 3:
+		return mfspr(SPRN_PA6T_PMC3);
+	case 4:
+		return mfspr(SPRN_PA6T_PMC4);
+	case 5:
+		return mfspr(SPRN_PA6T_PMC5);
+	default:
+		printk(KERN_ERR "ctr_read called with bad arg %u\n", i);
+		return 0;
+	}
+}
+
+static inline void ctr_write(unsigned int i, u64 val)
+{
+	switch (i) {
+	case 0:
+		mtspr(SPRN_PA6T_PMC0, val);
+		break;
+	case 1:
+		mtspr(SPRN_PA6T_PMC1, val);
+		break;
+	case 2:
+		mtspr(SPRN_PA6T_PMC2, val);
+		break;
+	case 3:
+		mtspr(SPRN_PA6T_PMC3, val);
+		break;
+	case 4:
+		mtspr(SPRN_PA6T_PMC4, val);
+		break;
+	case 5:
+		mtspr(SPRN_PA6T_PMC5, val);
+		break;
+	default:
+		printk(KERN_ERR "ctr_write called with bad arg %u\n", i);
+		break;
+	}
+}
+
+
+/* precompute the values to stuff in the hardware registers */
+static void pa6t_reg_setup(struct op_counter_config *ctr,
+			   struct op_system_config *sys,
+			   int num_ctrs)
+{
+	int pmc;
+
+	/*
+	 * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the
+	 * event_mappings file by turning off the counters that the user doesn't
+	 * care about
+	 *
+	 * setup user and kernel profiling
+	 */
+	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++)
+		if (!ctr[pmc].enabled) {
+			sys->mmcr0 &= ~(0x1UL << pmc);
+			sys->mmcr0 &= ~(0x1UL << (pmc+12));
+			pr_debug("turned off counter %u\n", pmc);
+		}
+
+	if (sys->enable_kernel)
+		sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN;
+	else
+		sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN);
+
+	if (sys->enable_user)
+		sys->mmcr0 |= PA6T_MMCR0_PREN;
+	else
+		sys->mmcr0 &= ~PA6T_MMCR0_PREN;
+
+	/*
+	 * The performance counter event settings are given in the mmcr0 and
+	 * mmcr1 values passed from the user in the op_system_config
+	 * structure (sys variable).
+	 */
+	mmcr0_val = sys->mmcr0;
+	mmcr1_val = sys->mmcr1;
+	pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0);
+	pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1);
+
+	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
+		/* counters are 40 bit. Move to cputable at some point? */
+		reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
+		pr_debug("reset_value for pmc%u inited to 0x%lx\n",
+				 pmc, reset_value[pmc]);
+	}
+}
+
+/* configure registers on this cpu */
+static void pa6t_cpu_setup(struct op_counter_config *ctr)
+{
+	u64 mmcr0 = mmcr0_val;
+	u64 mmcr1 = mmcr1_val;
+
+	/* Default is all PMCs off */
+	mmcr0 &= ~(0x3FUL);
+	mtspr(SPRN_PA6T_MMCR0, mmcr0);
+
+	/* program selected programmable events in */
+	mtspr(SPRN_PA6T_MMCR1, mmcr1);
+
+	pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(),
+		mfspr(SPRN_PA6T_MMCR0));
+	pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(),
+		mfspr(SPRN_PA6T_MMCR1));
+}
+
+static void pa6t_start(struct op_counter_config *ctr)
+{
+	int i;
+
+	/* Hold off event counting until rfid */
+	u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
+
+	for (i = 0; i < cur_cpu_spec->num_pmcs; i++)
+		if (ctr[i].enabled)
+			ctr_write(i, reset_value[i]);
+		else
+			ctr_write(i, 0UL);
+
+	mtspr(SPRN_PA6T_MMCR0, mmcr0);
+
+	oprofile_running = 1;
+
+	pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+}
+
+static void pa6t_stop(void)
+{
+	u64 mmcr0;
+
+	/* freeze counters */
+	mmcr0 = mfspr(SPRN_PA6T_MMCR0);
+	mmcr0 |= PA6T_MMCR0_FCM0;
+	mtspr(SPRN_PA6T_MMCR0, mmcr0);
+
+	oprofile_running = 0;
+
+	pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+}
+
+/* handle the perfmon overflow vector */
+static void pa6t_handle_interrupt(struct pt_regs *regs,
+				  struct op_counter_config *ctr)
+{
+	unsigned long pc = mfspr(SPRN_PA6T_SIAR);
+	int is_kernel = is_kernel_addr(pc);
+	u64 val;
+	int i;
+	u64 mmcr0;
+
+	/* disable perfmon counting until rfid */
+	mmcr0 = mfspr(SPRN_PA6T_MMCR0);
+	mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS);
+
+	/* Record samples. We've got one global bit for whether a sample
+	 * was taken, so add it for any counter that triggered overflow.
+	 */
+	for (i = 0; i < cur_cpu_spec->num_pmcs; i++) {
+		val = ctr_read(i);
+		if (val & (0x1UL << 39)) { /* Overflow bit set */
+			if (oprofile_running && ctr[i].enabled) {
+				if (mmcr0 & PA6T_MMCR0_SIARLOG)
+					oprofile_add_ext_sample(pc, regs, i, is_kernel);
+				ctr_write(i, reset_value[i]);
+			} else {
+				ctr_write(i, 0UL);
+			}
+		}
+	}
+
+	/* Restore mmcr0 to a good known value since the PMI changes it */
+	mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS;
+	mtspr(SPRN_PA6T_MMCR0, mmcr0);
+}
+
+struct op_powerpc_model op_model_pa6t = {
+	.reg_setup		= pa6t_reg_setup,
+	.cpu_setup		= pa6t_cpu_setup,
+	.start			= pa6t_start,
+	.stop			= pa6t_stop,
+	.handle_interrupt	= pa6t_handle_interrupt,
+};
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
index 2f2a13ed7667..ded357c17414 100644
--- a/arch/powerpc/platforms/4xx/Kconfig
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -3,278 +3,206 @@ config 4xx
 	depends on 40x || 44x
 	default y
 
-config WANT_EARLY_SERIAL
+config BOOKE
 	bool
-	select SERIAL_8250
-	default n
-
-menu "AMCC 4xx options"
-	depends on 4xx
-
-choice
-	prompt "Machine Type"
-	depends on 40x
-	default WALNUT
-
-config BUBINGA
-	bool "Bubinga"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
-	bool "CPCI405"
-	help
-	  This option enables support for the CPCI405 board.
-
-config EP405
-	bool "EP405/EP405PC"
-	help
-	  This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
-	bool "Redwood-5"
-	help
-	  This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
-	bool "Redwood-6"
-	help
-	  This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
-	bool "Sycamore"
-	help
-	  This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
-	bool "Walnut"
-	help
-	  This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
-	bool "Xilinx-ML300"
-	help
-	  This option enables support for the Xilinx ML300 evaluation board.
-
-endchoice
-
-choice
-	prompt "Machine Type"
 	depends on 44x
-	default EBONY
-
-config BAMBOO
-	bool "Bamboo"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-	bool "Ebony"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
-	bool "Luan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440SP evaluation board.
-
-config OCOTEA
-	bool "Ocotea"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GX evaluation board.
+	default y
 
-endchoice
+menu "AMCC 40x options"
+	depends on 40x
 
-config EP405PC
-	bool "EP405PC Support"
-	depends on EP405
+#config BUBINGA
+#	bool "Bubinga"
+#	depends on 40x
+#	default n
+#	select 405EP
+#	help
+#	  This option enables support for the IBM 405EP evaluation board.
+
+#config CPCI405
+#	bool "CPCI405"
+#	depends on 40x
+#	default n
+#	select 405GP
+#	help
+#	  This option enables support for the CPCI405 board.
+
+#config EP405
+#	bool "EP405/EP405PC"
+#	depends on 40x
+#	default n
+#	select 405GP
+#	help
+#	  This option enables support for the EP405/EP405PC boards.
+
+#config EP405PC
+#	bool "EP405PC Support"
+#	depends on EP405
+#	default y
+#	help
+#	  This option enables support for the extra features of the EP405PC board.
+
+#config REDWOOD_5
+#	bool "Redwood-5"
+#	depends on 40x
+#	default n
+#	select STB03xxx
+#	help
+#	  This option enables support for the IBM STB04 evaluation board.
+
+#config REDWOOD_6
+#	bool "Redwood-6"
+#	depends on 40x
+#	default n
+#	select STB03xxx
+#	help
+#	  This option enables support for the IBM STBx25xx evaluation board.
+
+#config SYCAMORE
+#	bool "Sycamore"
+#	depends on 40x
+#	default n
+#	select 405GPR
+#	help
+#	  This option enables support for the IBM PPC405GPr evaluation board.
+
+#config WALNUT
+#	bool "Walnut"
+#	depends on 40x
+#	default y
+#	select 405GP
+#	help
+#	  This option enables support for the IBM PPC405GP evaluation board.
+
+#config XILINX_ML300
+#	bool "Xilinx-ML300"
+#	depends on 40x
+#	default y
+#	select VIRTEX_II_PRO
+#	help
+#	  This option enables support for the Xilinx ML300 evaluation board.
 
+endmenu
 
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
+# 40x specific CPU modules, selected based on the board above.
 config NP405H
 	bool
-	depends on ASH
-	default y
+	#depends on ASH
 
-config 440EP
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
 	bool
-	depends on BAMBOO
-	select PPC_FPU
-	default y
+	#depends on OAK
+	select IBM405_ERR51
 
-config 440GP
+config 405GP
 	bool
-	depends on EBONY
-	default y
+	select IBM405_ERR77
+	select IBM405_ERR51
 
-config 440GX
+config 405EP
 	bool
-	depends on OCOTEA
-	default y
 
-config 440SP
+config 405GPR
 	bool
-	depends on LUAN
-	default y
 
-config 440
+config VIRTEX_II_PRO
 	bool
-	depends on 440GP || 440SP || 440EP
-	default y
+	select IBM405_ERR77
+	select IBM405_ERR51
 
-config 440A
+config STB03xxx
 	bool
-	depends on 440GX
-	default y
+	select IBM405_ERR77
+	select IBM405_ERR51
 
-config IBM440EP_ERR42
-	bool
-	depends on 440EP
-	default y
+# 40x errata/workaround config symbols, selected by the CPU models above
 
 # All 405-based cores up until the 405GPR and 405EP have this errata.
 config IBM405_ERR77
 	bool
-	depends on 40x && !403GCX && !405GPR && !405EP
-	default y
 
 # All 40x-based cores, up until the 405GPR and 405EP have this errata.
 config IBM405_ERR51
 	bool
-	depends on 40x && !405GPR && !405EP
-	default y
 
-config BOOKE
-	bool
+menu "AMCC 44x options"
 	depends on 44x
-	default y
-
-config IBM_OCP
-	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-	default y
 
-config XILINX_OCP
-	bool
-	depends on XILINX_ML300
-	default y
+#config BAMBOO
+#	bool "Bamboo"
+#	depends on 44x
+#	default n
+#	select 440EP
+#	help
+#	  This option enables support for the IBM PPC440EP evaluation board.
 
-config IBM_EMAC4
-	bool
-	depends on 440GX || 440SP
-	default y
-
-config BIOS_FIXUP
-	bool
-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
-	default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	depends on OAK
-	default y
-
-config 405EP
-	bool
-	depends on BUBINGA
-	default y
-
-config 405GP
-	bool
-	depends on CPCI405 || EP405 || WALNUT
-	default y
-
-config 405GPR
-	bool
-	depends on SYCAMORE
+config EBONY
+	bool "Ebony"
+	depends on 44x
 	default y
+	select 440GP
+	help
+	  This option enables support for the IBM PPC440GP evaluation board.
 
-config VIRTEX_II_PRO
-	bool
-	depends on XILINX_ML300
-	default y
+#config LUAN
+#	bool "Luan"
+#	depends on 44x
+#	default n
+#	select 440SP
+#	help
+#	  This option enables support for the IBM PPC440SP evaluation board.
+
+#config OCOTEA
+#	bool "Ocotea"
+#	depends on 44x
+#	default n
+#	select 440GX
+#	help
+#	  This option enables support for the IBM PPC440GX evaluation board.
 
-config STB03xxx
-	bool
-	depends on REDWOOD_5 || REDWOOD_6
-	default y
+endmenu
 
-config EMBEDDEDBOOT
+# 44x specific CPU modules, selected based on the board above.
+config 440EP
 	bool
-	depends on EP405 || XILINX_ML300
-	default y
+	select PPC_FPU
+	select IBM440EP_ERR42
 
-config IBM_OPENBIOS
+config 440GP
 	bool
-	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
-	default y
+	select IBM_NEW_EMAC_ZMII
 
-config PPC4xx_DMA
-	bool "PPC4xx DMA controller support"
-	depends on 4xx
-
-config PPC4xx_EDMA
+config 440GX
 	bool
-	depends on !STB03xxx && PPC4xx_DMA
-	default y
 
-config PPC_GEN550
+config 440SP
 	bool
-	depends on 4xx
-	default y
-
-choice
-	prompt "TTYS0 device and default console"
-	depends on 40x
-	default UART0_TTYS0
-
-config UART0_TTYS0
-	bool "UART0"
 
-config UART0_TTYS1
-	bool "UART1"
-
-endchoice
-
-config SERIAL_SICC
-	bool "SICC Serial port support"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
+config 440A
 	bool
-	depends on SERIAL_SICC && UART0_TTYS1
+	depends on 440GX
 	default y
 
-config SERIAL_SICC_CONSOLE
+# 44x errata/workaround config symbols, selected by the CPU models above
+config IBM440EP_ERR42
 	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-endmenu
 
+#config XILINX_OCP
+#	bool
+#	depends on XILINX_ML300
+#	default y
 
-menu "IBM 40x options"
-	depends on 40x
-
-config SERIAL_SICC
-	bool "SICC Serial port"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
+#config BIOS_FIXUP
+#	bool
+#	depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+#	default y
 
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
+#config PPC4xx_DMA
+#	bool "PPC4xx DMA controller support"
+#	depends on 4xx
 
-endmenu
+#config PPC4xx_EDMA
+#	bool
+#	depends on !STB03xxx && PPC4xx_DMA
+#	default y
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
new file mode 100644
index 000000000000..bc4aa4a80a12
--- /dev/null
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -0,0 +1,35 @@
+config PPC_MPC52xx
+	bool
+	default n
+
+config PPC_MPC5200
+	bool
+	select PPC_MPC52xx
+	default n
+
+config PPC_MPC5200_BUGFIX
+	bool "MPC5200 (L25R) bugfix support"
+	depends on PPC_MPC5200
+	default n
+	help
+	  Enable workarounds for original MPC5200 errata.  This is not required
+	  for MPC5200B based boards.
+
+	  It is safe to say 'Y' here
+
+config PPC_EFIKA
+	bool "bPlan Efika 5k2. MPC5200B based computer"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select PPC_RTAS
+	select RTAS_PROC
+	select PPC_MPC52xx
+	select PPC_NATIVE
+	default n
+
+config PPC_LITE5200
+	bool "Freescale Lite5200 Eval Board"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select PPC_MPC5200
+	default n
+
+
diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
index 8de034116681..a6bba97314eb 100644
--- a/arch/powerpc/platforms/52xx/efika.c
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -112,7 +112,7 @@ void __init efika_pcisetup(void)
 		return;
 	}
 
-	bus_range = get_property(pcictrl, "bus-range", &len);
+	bus_range = of_get_property(pcictrl, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING EFIKA_PLATFORM_NAME
 		       ": Can't get bus-range for %s\n", pcictrl->full_name);
@@ -158,18 +158,17 @@ void __init efika_pcisetup(void)
 static void efika_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *root;
-	const char *revision = NULL;
-	const char *codegendescription = NULL;
-	const char *codegenvendor = NULL;
+	const char *revision;
+	const char *codegendescription;
+	const char *codegenvendor;
 
 	root = of_find_node_by_path("/");
 	if (!root)
 		return;
 
-	revision = get_property(root, "revision", NULL);
-	codegendescription =
-		    get_property(root, "CODEGEN,description", NULL);
-	codegenvendor = get_property(root, "CODEGEN,vendor", NULL);
+	revision = of_get_property(root, "revision", NULL);
+	codegendescription = of_get_property(root, "CODEGEN,description", NULL);
+	codegenvendor = of_get_property(root, "CODEGEN,vendor", NULL);
 
 	if (codegendescription)
 		seq_printf(m, "machine\t\t: %s\n", codegendescription);
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index cc3b40de21dd..8e2646ac417b 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -94,8 +94,8 @@ static void __init lite5200_setup_arch(void)
 
 	np = of_find_node_by_type(NULL, "cpu");
 	if (np) {
-		unsigned int *fp =
-		    (int *)get_property(np, "clock-frequency", NULL);
+		const unsigned int *fp =
+			of_get_property(np, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
@@ -108,9 +108,11 @@ static void __init lite5200_setup_arch(void)
 	lite5200_setup_cpu();	/* Platorm specific */
 
 #ifdef CONFIG_PCI
-	np = of_find_node_by_type(np, "pci");
-	if (np)
+	np = of_find_node_by_type(NULL, "pci");
+	if (np) {
 		mpc52xx_add_bridge(np);
+		of_node_put(np);
+	}
 #endif
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -132,7 +134,7 @@ void lite5200_show_cpuinfo(struct seq_file *m)
 	const char *model = NULL;
 
 	if (np)
-		model = get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 
 	seq_printf(m, "vendor\t\t:	Freescale Semiconductor\n");
 	seq_printf(m, "machine\t\t:	%s\n", model ? model : "unknown");
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index ed0cb694aea8..2dd415ff55a9 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -60,7 +60,7 @@ mpc52xx_find_ipb_freq(struct device_node *node)
 
 	of_node_get(node);
 	while (node) {
-		p_ipb_freq = get_property(node, "bus-frequency", NULL);
+		p_ipb_freq = of_get_property(node, "bus-frequency", NULL);
 		if (p_ipb_freq)
 			break;
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index faf161bdbc1c..34d34a26d305 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -370,7 +370,7 @@ mpc52xx_add_bridge(struct device_node *node)
 		return -EINVAL;
 	}
 
-	bus_range = get_property(node, "bus-range", &len);
+	bus_range = of_get_property(node, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n",
 		       node->full_name);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index c75192567e55..fbfff95b4437 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -128,7 +128,7 @@ static void mpc52xx_main_mask(unsigned int virq)
 
 	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
 
-	io_be_setbit(&intr->main_mask, 15 - l2irq);
+	io_be_setbit(&intr->main_mask, 16 - l2irq);
 }
 
 static void mpc52xx_main_unmask(unsigned int virq)
@@ -141,7 +141,7 @@ static void mpc52xx_main_unmask(unsigned int virq)
 
 	pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq);
 
-	io_be_clrbit(&intr->main_mask, 15 - l2irq);
+	io_be_clrbit(&intr->main_mask, 16 - l2irq);
 }
 
 static struct irq_chip mpc52xx_main_irqchip = {
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 47d841ecf2e2..de7fce9cb6eb 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,21 +1,36 @@
-menu "Platform support"
-       depends on PPC_82xx
-
 choice
-       prompt "Machine Type"
-       default MPC82xx_ADS
+	prompt "Machine Type"
+	depends on PPC_82xx
+	default MPC82xx_ADS
 
 config MPC82xx_ADS
-       bool "Freescale MPC82xx ADS"
-       select DEFAULT_UIMAGE
-       select PQ2ADS
-       select 8272
-       select 8260
-       select CPM2
-       select FSL_SOC
-       help
-         This option enables support for the MPC8272 ADS board
+	bool "Freescale MPC82xx ADS"
+	select DEFAULT_UIMAGE
+	select PQ2ADS
+	select 8272
+	select 8260
+	select FSL_SOC
+	help
+	This option enables support for the MPC8272 ADS board
 
 endchoice
 
-endmenu
+config PQ2ADS
+	bool
+	default n
+
+config 8260
+	bool
+	depends on 6xx
+	select CPM2
+	help
+	  The MPC8260 is a typical embedded CPU made by Freescale.  Selecting
+	  this option means that you wish to build a kernel for a machine with
+	  an 8260 class CPU.
+
+config 8272
+	bool
+	select 8260
+	help
+	  The MPC8272 CPM has a different internal dpram setup than other CPM2
+	  devices
diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c
index 74e7892cdfcf..cc9900d2e5ee 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx.c
@@ -55,17 +55,17 @@
 static int __init get_freq(char *name, unsigned long *val)
 {
 	struct device_node *cpu;
-	unsigned int *fp;
+	const unsigned int *fp;
 	int found = 0;
 
 	/* The cpu node should have timebase and clock frequency properties */
 	cpu = of_find_node_by_type(NULL, "cpu");
 
 	if (cpu) {
-		fp = (unsigned int *)get_property(cpu, name, NULL);
+		fp = of_get_property(cpu, name, NULL);
 		if (fp) {
 			found = 1;
-			*val = *fp++;
+			*val = *fp;
 		}
 
 		of_node_put(cpu);
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index 7334c1a15b90..47cb09f08052 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -456,7 +456,7 @@ void m82xx_pci_init_irq(void)
 		iounmap(immap);
 		return;
 	}
-	irq_map = get_property(np, "interrupt-map", &size);
+	irq_map = of_get_property(np, "interrupt-map", &size);
 	if ((!irq_map) || (size <= 7)) {
 		printk(KERN_INFO "No interrupt-map property of pci node\n");
 		iounmap(immap);
@@ -481,7 +481,7 @@ void m82xx_pci_init_irq(void)
 	}
 	pci_pic_node = of_node_get(np);
 	/* PCI interrupt controller registers: status and mask */
-	regs = get_property(np, "reg", &size);
+	regs = of_get_property(np, "reg", &size);
 	if ((!regs) || (size <= 2)) {
 		printk(KERN_INFO "No reg property in pci pic node\n");
 		iounmap(immap);
@@ -521,20 +521,20 @@ void __init add_bridge(struct device_node *np)
 	struct pci_controller *hose;
 	struct resource r;
 	const int *bus_range;
-	const void *ptr;
+	const uint *ptr;
 
 	memset(&r, 0, sizeof(r));
 	if (of_address_to_resource(np, 0, &r)) {
 		printk(KERN_INFO "No PCI reg property in device tree\n");
 		return;
 	}
-	if (!(ptr = get_property(np, "clock-frequency", NULL))) {
+	if (!(ptr = of_get_property(np, "clock-frequency", NULL))) {
 		printk(KERN_INFO "No clock-frequency property in PCI node");
 		return;
 	}
-	pci_clk_frq = *(uint *) ptr;
+	pci_clk_frq = *ptr;
 	of_node_put(np);
-	bus_range = get_property(np, "bus-range", &len);
+	bus_range = of_get_property(np, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", np->full_name);
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 1aea1e69ff31..19cafdf6df93 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,8 +1,6 @@
-menu "Platform support"
-	depends on PPC_83xx
-
 choice
 	prompt "Machine Type"
+	depends on PPC_83xx
 	default MPC834x_MDS
 
 config MPC8313_RDB
@@ -18,6 +16,13 @@ config MPC832x_MDS
 	help
 	  This option enables support for the MPC832x MDS evaluation board.
 
+config MPC832x_RDB
+	bool "Freescale MPC832x RDB"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	help
+	  This option enables support for the MPC8323 RDB board.
+
 config MPC834x_MDS
 	bool "Freescale MPC834x MDS"
 	select DEFAULT_UIMAGE
@@ -38,12 +43,12 @@ config MPC834x_ITX
 	  Be aware that PCI initialization is the bootloader's
 	  responsibility.
 
-config MPC8360E_PB
-	bool "Freescale MPC8360E PB"
+config MPC836x_MDS
+	bool "Freescale MPC836x MDS"
 	select DEFAULT_UIMAGE
 	select QUICC_ENGINE
 	help
-	  This option enables support for the MPC836x EMDS Processor Board.
+	  This option enables support for the MPC836x MDS Processor Board.
 
 endchoice
 
@@ -57,7 +62,7 @@ config PPC_MPC832x
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC832x_MDS
+	default y if MPC832x_MDS || MPC832x_RDB
 
 config MPC834x
 	bool
@@ -69,6 +74,4 @@ config PPC_MPC836x
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC8360E_PB
-
-endmenu
+	default y if MPC836x_MDS
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 6c8199c4c382..31a91b53f528 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -4,7 +4,8 @@
 obj-y				:= misc.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_MPC8313_RDB)	+= mpc8313_rdb.o
+obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
-obj-$(CONFIG_MPC8360E_PB)	+= mpc8360e_pb.o
+obj-$(CONFIG_MPC836x_MDS)	+= mpc836x_mds.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o
diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
index c3b98c34eb6b..32e9e9492841 100644
--- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
@@ -74,16 +74,9 @@ void __init mpc8313_rdb_init_IRQ(void)
  */
 static int __init mpc8313_rdb_probe(void)
 {
-	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
-					  "model", NULL);
-	if (model == NULL)
-		return 0;
-	if (strcmp(model, "MPC8313ERDB"))
-		return 0;
+        unsigned long root = of_get_flat_dt_root();
 
-	DBG("MPC8313 RDB found\n");
-
-	return 1;
+        return of_flat_dt_is_compatible(root, "MPC8313ERDB");
 }
 
 define_machine(mpc8313_rdb) {
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 3ecb55f8a6e2..fff09f5d6edf 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -41,7 +41,6 @@
 #include <asm/qe_ic.h>
 
 #include "mpc83xx.h"
-#include "mpc832x_mds.h"
 
 #undef DEBUG
 #ifdef DEBUG
@@ -57,11 +56,6 @@ unsigned long isa_mem_base = 0;
 
 static u8 *bcsr_regs = NULL;
 
-u8 *get_bcsr(void)
-{
-	return bcsr_regs;
-}
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -74,17 +68,6 @@ static void __init mpc832x_sys_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc832x_sys_setup_arch()", 0);
 
-	np = of_find_node_by_type(NULL, "cpu");
-	if (np != 0) {
-		unsigned int *fp =
-		    (int *)get_property(np, "clock-frequency", NULL);
-		if (fp != 0)
-			loops_per_jiffy = *fp / HZ;
-		else
-			loops_per_jiffy = 50000000 / HZ;
-		of_node_put(np);
-	}
-
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
 	if (np != 0) {
@@ -121,34 +104,23 @@ static void __init mpc832x_sys_setup_arch(void)
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}
-
 #endif				/* CONFIG_QUICC_ENGINE */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
 }
 
+static struct of_device_id mpc832x_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .type = "qe", },
+	{},
+};
+
 static int __init mpc832x_declare_of_platform_devices(void)
 {
-	struct device_node *np;
-
-	for (np = NULL; (np = of_find_compatible_node(np, "network",
-					"ucc_geth")) != NULL;) {
-		int ucc_num;
-		char bus_id[BUS_ID_SIZE];
+	if (!machine_is(mpc832x_mds))
+		return 0;
 
-		ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
-		snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
-		of_platform_device_create(np, bus_id, NULL);
-	}
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, mpc832x_ids, NULL);
 
 	return 0;
 }
@@ -156,7 +128,6 @@ device_initcall(mpc832x_declare_of_platform_devices);
 
 static void __init mpc832x_sys_init_IRQ(void)
 {
-
 	struct device_node *np;
 
 	np = of_find_node_by_type(NULL, "ipic");
@@ -189,6 +160,9 @@ static int __init mpc832x_rtc_hookup(void)
 {
 	struct timespec tv;
 
+	if (!machine_is(mpc832x_mds))
+		return 0;
+
 	ppc_md.get_rtc_time = ds1374_get_rtc_time;
 	ppc_md.set_rtc_time = ds1374_set_rtc_time;
 
@@ -207,17 +181,9 @@ late_initcall(mpc832x_rtc_hookup);
  */
 static int __init mpc832x_sys_probe(void)
 {
-	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
-					  "model", NULL);
-
-	if (model == NULL)
-		return 0;
-	if (strcmp(model, "MPC8323EMDS"))
-		return 0;
-
-	DBG("%s found\n", model);
+        unsigned long root = of_get_flat_dt_root();
 
-	return 1;
+        return of_flat_dt_is_compatible(root, "MPC832xMDS");
 }
 
 define_machine(mpc832x_mds) {
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.h b/arch/powerpc/platforms/83xx/mpc832x_mds.h
deleted file mode 100644
index a49588904f8a..000000000000
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
- *
- * Description:
- * MPC832x MDS board specific header.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC832x_MDS_H__
-#define __MACH_MPC832x_MDS_H__
-
-extern u8 *get_bcsr(void);
-
-#endif				/* __MACH_MPC832x_MDS_H__ */
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
new file mode 100644
index 000000000000..6b71e9ffb11a
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -0,0 +1,138 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc832x_rdb.c
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved.
+ *
+ * Description:
+ * MPC832x RDB board specific routines.
+ * This file is based on mpc832x_mds.c and mpc8313_rdb.c
+ * Author: Michael Barkowski <michael.barkowski@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/of_platform.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+
+#include "mpc83xx.h"
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init mpc832x_rdb_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc832x_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+		add_bridge(np);
+
+	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
+#endif
+
+#ifdef CONFIG_QUICC_ENGINE
+	qe_reset();
+
+	if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+		par_io_init(np);
+		of_node_put(np);
+
+		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
+			par_io_of_config(np);
+	}
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+static struct of_device_id mpc832x_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .type = "qe", },
+	{},
+};
+
+static int __init mpc832x_declare_of_platform_devices(void)
+{
+	if (!machine_is(mpc832x_rdb))
+		return 0;
+
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, mpc832x_ids, NULL);
+
+	return 0;
+}
+device_initcall(mpc832x_declare_of_platform_devices);
+
+void __init mpc832x_rdb_init_IRQ(void)
+{
+
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+	of_node_put(np);
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_node_by_type(NULL, "qeic");
+	if (!np)
+		return;
+
+	qe_ic_init(np, 0);
+	of_node_put(np);
+#endif				/* CONFIG_QUICC_ENGINE */
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc832x_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MPC832xRDB");
+}
+
+define_machine(mpc832x_rdb) {
+	.name		= "MPC832x RDB",
+	.probe		= mpc832x_rdb_probe,
+	.setup_arch	= mpc832x_rdb_setup_arch,
+	.init_IRQ	= mpc832x_rdb_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 443a3172f370..3c009f6d4a4f 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -55,28 +55,12 @@ static void __init mpc834x_itx_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc834x_itx_setup_arch()", 0);
 
-	np = of_find_node_by_type(NULL, "cpu");
-	if (np != 0) {
-		const unsigned int *fp =
-			get_property(np, "clock-frequency", NULL);
-		if (fp != 0)
-			loops_per_jiffy = *fp / HZ;
-		else
-			loops_per_jiffy = 50000000 / HZ;
-		of_node_put(np);
-	}
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
 
 	ppc_md.pci_exclude_device = mpc83xx_exclude_device;
 #endif
-
-#ifdef  CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
 }
 
 static void __init mpc834x_itx_init_IRQ(void)
@@ -100,10 +84,9 @@ static void __init mpc834x_itx_init_IRQ(void)
  */
 static int __init mpc834x_itx_probe(void)
 {
-	/* We always match for now, eventually we should look at the flat
-	   dev tree to ensure this is the board we are suppose to run on
-	*/
-	return 1;
+        unsigned long root = of_get_flat_dt_root();
+
+        return of_flat_dt_is_compatible(root, "MPC834xMITX");
 }
 
 define_machine(mpc834x_itx) {
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.h b/arch/powerpc/platforms/83xx/mpc834x_itx.h
deleted file mode 100644
index 174ca4ef55f3..000000000000
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/powerpc/platforms/83xx/mpc834x_itx.h
- *
- * MPC834X ITX common board definitions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __MACH_MPC83XX_ITX_H__
-#define __MACH_MPC83XX_ITX_H__
-
-#define PIRQA	MPC83xx_IRQ_EXT4
-#define PIRQB	MPC83xx_IRQ_EXT5
-#define PIRQC	MPC83xx_IRQ_EXT6
-#define PIRQD	MPC83xx_IRQ_EXT7
-
-#endif				/* __MACH_MPC83XX_ITX_H__ */
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index d2736da76c46..8aa9a93e2aa2 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -55,9 +55,9 @@ static int mpc834x_usb_cfg(void)
 	struct device_node *np = NULL;
 	int port0_is_dr = 0;
 
-	if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL)
+	if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr")) != NULL)
 		port0_is_dr = 1;
-	if ((np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL){
+	if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph")) != NULL){
 		if (port0_is_dr) {
 			printk(KERN_WARNING
 				"There is only one USB port on PB board! \n");
@@ -103,8 +103,8 @@ static int mpc834x_usb_cfg(void)
 		return -1;
 
 	/*
-	 * if MDS board is plug into PIB board,
-	 * force to use the PHY on MDS board
+	 * if Processor Board is plugged into PIB board,
+	 * force to use the PHY on Processor Board
 	 */
 	bcsr5 = in_8(bcsr_regs + 5);
 	if (!(bcsr5 & BCSR5_INT_USB))
@@ -125,17 +125,6 @@ static void __init mpc834x_mds_setup_arch(void)
 	if (ppc_md.progress)
 		ppc_md.progress("mpc834x_mds_setup_arch()", 0);
 
-	np = of_find_node_by_type(NULL, "cpu");
-	if (np != 0) {
-		const unsigned int *fp =
-			get_property(np, "clock-frequency", NULL);
-		if (fp != 0)
-			loops_per_jiffy = *fp / HZ;
-		else
-			loops_per_jiffy = 50000000 / HZ;
-		of_node_put(np);
-	}
-
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
 		add_bridge(np);
@@ -144,12 +133,6 @@ static void __init mpc834x_mds_setup_arch(void)
 #endif
 
 	mpc834x_usb_cfg();
-
-#ifdef  CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
 }
 
 static void __init mpc834x_mds_init_IRQ(void)
@@ -176,6 +159,9 @@ static int __init mpc834x_rtc_hookup(void)
 {
 	struct timespec tv;
 
+	if (!machine_is(mpc834x_mds))
+		return 0;
+
 	ppc_md.get_rtc_time = ds1374_get_rtc_time;
 	ppc_md.set_rtc_time = ds1374_set_rtc_time;
 
@@ -194,10 +180,9 @@ late_initcall(mpc834x_rtc_hookup);
  */
 static int __init mpc834x_mds_probe(void)
 {
-	/* We always match for now, eventually we should look at the flat
-	   dev tree to ensure this is the board we are suppose to run on
-	*/
-	return 1;
+        unsigned long root = of_get_flat_dt_root();
+
+        return of_flat_dt_is_compatible(root, "MPC834xMDS");
 }
 
 define_machine(mpc834x_mds) {
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index ccce2f9f283d..526ed090a446 100644
--- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -5,12 +5,12 @@
  *	   Yin Olivia <Hong-hua.Yin@freescale.com>
  *
  * Description:
- * MPC8360E MDS PB board specific routines.
+ * MPC8360E MDS board specific routines.
  *
  * Changelog:
  * Jun 21, 2006	Initial version
  *
- * This program is free software; you can redistribute  it and/or modify it
+ * This program is free software; you can redistribute it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
@@ -62,33 +62,17 @@ unsigned long isa_mem_base = 0;
 
 static u8 *bcsr_regs = NULL;
 
-u8 *get_bcsr(void)
-{
-	return bcsr_regs;
-}
-
 /* ************************************************************************
  *
  * Setup the architecture
  *
  */
-static void __init mpc8360_sys_setup_arch(void)
+static void __init mpc836x_mds_setup_arch(void)
 {
 	struct device_node *np;
 
 	if (ppc_md.progress)
-		ppc_md.progress("mpc8360_sys_setup_arch()", 0);
-
-	np = of_find_node_by_type(NULL, "cpu");
-	if (np != 0) {
-		const unsigned int *fp =
-		    get_property(np, "clock-frequency", NULL);
-		if (fp != 0)
-			loops_per_jiffy = *fp / HZ;
-		else
-			loops_per_jiffy = 50000000 / HZ;
-		of_node_put(np);
-	}
+		ppc_md.progress("mpc836x_mds_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
@@ -128,40 +112,29 @@ static void __init mpc8360_sys_setup_arch(void)
 	}
 
 #endif				/* CONFIG_QUICC_ENGINE */
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef  CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
 }
 
-static int __init mpc8360_declare_of_platform_devices(void)
-{
-	struct device_node *np;
+static struct of_device_id mpc836x_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .type = "qe", },
+	{},
+};
 
-	for (np = NULL; (np = of_find_compatible_node(np, "network",
-					"ucc_geth")) != NULL;) {
-		int ucc_num;
-		char bus_id[BUS_ID_SIZE];
+static int __init mpc836x_declare_of_platform_devices(void)
+{
+	if (!machine_is(mpc836x_mds))
+		return 0;
 
-		ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
-		snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
-		of_platform_device_create(np, bus_id, NULL);
-	}
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, mpc836x_ids, NULL);
 
 	return 0;
 }
-device_initcall(mpc8360_declare_of_platform_devices);
+device_initcall(mpc836x_declare_of_platform_devices);
 
-static void __init mpc8360_sys_init_IRQ(void)
+static void __init mpc836x_mds_init_IRQ(void)
 {
-
 	struct device_node *np;
 
 	np = of_find_node_by_type(NULL, "ipic");
@@ -194,6 +167,9 @@ static int __init mpc8360_rtc_hookup(void)
 {
 	struct timespec tv;
 
+	if (!machine_is(mpc836x_mds))
+		return 0;
+
 	ppc_md.get_rtc_time = ds1374_get_rtc_time;
 	ppc_md.set_rtc_time = ds1374_set_rtc_time;
 
@@ -210,28 +186,21 @@ late_initcall(mpc8360_rtc_hookup);
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
-static int __init mpc8360_sys_probe(void)
+static int __init mpc836x_mds_probe(void)
 {
-	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
-					  "model", NULL);
-	if (model == NULL)
-		return 0;
-	if (strcmp(model, "MPC8360EPB"))
-		return 0;
-
-	DBG("MPC8360EMDS-PB found\n");
+        unsigned long root = of_get_flat_dt_root();
 
-	return 1;
+        return of_flat_dt_is_compatible(root, "MPC836xMDS");
 }
 
-define_machine(mpc8360_sys) {
-	.name 		= "MPC8360E PB",
-	.probe 		= mpc8360_sys_probe,
-	.setup_arch 	= mpc8360_sys_setup_arch,
-	.init_IRQ 	= mpc8360_sys_init_IRQ,
-	.get_irq 	= ipic_get_irq,
-	.restart 	= mpc83xx_restart,
-	.time_init 	= mpc83xx_time_init,
+define_machine(mpc836x_mds) {
+	.name		= "MPC836x MDS",
+	.probe		= mpc836x_mds_probe,
+	.setup_arch	= mpc836x_mds_setup_arch,
+	.init_IRQ	= mpc836x_mds_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
 	.calibrate_decr	= generic_calibrate_decr,
-	.progress 	= udbg_progress,
+	.progress	= udbg_progress,
 };
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
index 9c3650555144..774457d09e94 100644
--- a/arch/powerpc/platforms/83xx/pci.c
+++ b/arch/powerpc/platforms/83xx/pci.c
@@ -60,7 +60,7 @@ int __init add_bridge(struct device_node *dev)
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
 	/* Get bus range if any */
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 0efdd2f1babe..629926e01e90 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -1,8 +1,6 @@
-menu "Platform support"
-	depends on PPC_85xx
-
 choice
 	prompt "Machine Type"
+	depends on PPC_85xx
 	default MPC8540_ADS
 
 config MPC8540_ADS
@@ -23,12 +21,18 @@ config MPC85xx_CDS
 	help
 	  This option enables support for the MPC85xx CDS board
 
-config MPC8568_MDS
-	bool "Freescale MPC8568 MDS"
+config MPC85xx_MDS
+	bool "Freescale MPC85xx MDS"
 	select DEFAULT_UIMAGE
 #	select QUICC_ENGINE
 	help
-	  This option enables support for the MPC8568 MDS board
+	  This option enables support for the MPC85xx MDS board
+
+config MPC8544_DS
+	bool "Freescale MPC8544 DS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8544 DS board
 
 endchoice
 
@@ -40,32 +44,15 @@ config MPC8540
 
 config MPC8560
 	bool
-	select PPC_INDIRECT_PCI
+	select CPM2
 	default y if MPC8560_ADS
 
 config MPC85xx
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
-	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS
-
-config PPC_INDIRECT_PCI_BE
-	bool
-	depends on PPC_85xx
-	default y
-
-config MPIC
-	bool
-	default y
-
-config CPM2
-	bool
-	depends on MPC8560
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it.
-
-endmenu
+	select PPC_INDIRECT_PCI_BE
+	select MPIC
+	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
+	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
+		|| MPC85xx_MDS || MPC8544_DS
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index e40e521816b8..4e02cbb14cf7 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_PPC_85xx)	+= misc.o pci.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
-obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o
+obj-$(CONFIG_MPC8544_DS)  += mpc8544_ds.o
+obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
new file mode 100644
index 000000000000..2867f85e6325
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c
@@ -0,0 +1,144 @@
+/*
+ * MPC8544 DS Board Setup
+ *
+ * Author Xianghua Xiao (x.xiao@freescale.com)
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/mpc85xx.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#include <sysdev/fsl_soc.h>
+#include "mpc85xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+
+void __init mpc8544_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np = NULL;
+#ifdef CONFIG_PPC_I8259
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+#endif
+
+	np = of_find_node_by_type(np, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	/* Alloc mpic structure and per isu has 16 INT entries. */
+	mpic = mpic_alloc(np, r.start,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			  16, 64, " OPENPIC     ");
+	BUG_ON(mpic == NULL);
+
+	/*
+	 * 48 Internal Interrupts
+	 */
+	mpic_assign_isu(mpic, 0, r.start + 0x10200);
+	mpic_assign_isu(mpic, 1, r.start + 0x10400);
+	mpic_assign_isu(mpic, 2, r.start + 0x10600);
+
+	/*
+	 * 16 External interrupts
+	 */
+	mpic_assign_isu(mpic, 3, r.start + 0x10000);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize the i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+	    if (device_is_compatible(np, "chrp,iic")) {
+		cascade_node = np;
+		break;
+	}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
+
+	DBG("mpc8544ds: cascade mapped to irq %d\n", cascade_irq);
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc8544_8259_cascade);
+#endif	/* CONFIG_PPC_I8259 */
+}
+
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc8544_ds_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8544_ds_setup_arch()", 0);
+
+	printk("MPC8544 DS board from Freescale Semiconductor\n");
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc8544_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MPC8544DS");
+}
+
+define_machine(mpc8544_ds) {
+	.name			= "MPC8544 DS",
+	.probe			= mpc8544_ds_probe,
+	.setup_arch		= mpc8544_ds_setup_arch,
+	.init_IRQ		= mpc8544_ds_pic_init,
+	.get_irq		= mpic_get_irq,
+	.restart		= mpc85xx_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index c56fce57621c..5d27621f0927 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -17,7 +17,6 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/root_dev.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -228,7 +227,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 	if (cpu != 0) {
 		const unsigned int *fp;
 
-		fp = get_property(cpu, "clock-frequency", NULL);
+		fp = of_get_property(cpu, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
@@ -245,12 +244,6 @@ static void __init mpc85xx_ads_setup_arch(void)
 		add_bridge(np);
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
-
-#ifdef  CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
 }
 
 static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
@@ -279,10 +272,9 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
  */
 static int __init mpc85xx_ads_probe(void)
 {
-	/* We always match for now, eventually we should look at the flat
-	   dev tree to ensure this is the board we are suppose to run on
-	*/
-	return 1;
+        unsigned long root = of_get_flat_dt_root();
+
+        return of_flat_dt_is_compatible(root, "MPC85xxADS");
 }
 
 define_machine(mpc85xx_ads) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index abc0aca6de40..7e71636f9098 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -22,7 +22,6 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/root_dev.h>
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
@@ -238,7 +237,7 @@ static void __init mpc85xx_cds_setup_arch(void)
 	if (cpu != 0) {
 		const unsigned int *fp;
 
-		fp = get_property(cpu, "clock-frequency", NULL);
+		fp = of_get_property(cpu, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
@@ -263,12 +262,6 @@ static void __init mpc85xx_cds_setup_arch(void)
 	ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
-
-#ifdef  CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
 }
 
 static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
@@ -298,11 +291,9 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
  */
 static int __init mpc85xx_cds_probe(void)
 {
-	/* We always match for now, eventually we should look at
-	 * the flat dev tree to ensure this is the board we are
-	 * supposed to run on
-	 */
-	return 1;
+        unsigned long root = of_get_flat_dt_root();
+
+        return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
 define_machine(mpc85xx_cds) {
diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 0861d1107bc8..54db41689954 100644
--- a/arch/powerpc/platforms/85xx/mpc8568_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -8,7 +8,7 @@
  *	   Yin Olivia <Hong-hua.Yin@freescale.com>
  *
  * Description:
- * MPC8568E MDS PB board specific routines.
+ * MPC85xx MDS board specific routines.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -27,7 +27,6 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/root_dev.h>
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
@@ -70,19 +69,18 @@ unsigned long isa_mem_base = 0;
  * Setup the architecture
  *
  */
-static void __init mpc8568_mds_setup_arch(void)
+static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
 	static u8 *bcsr_regs = NULL;
 
-
 	if (ppc_md.progress)
-		ppc_md.progress("mpc8568_mds_setup_arch()", 0);
+		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 
 	np = of_find_node_by_type(NULL, "cpu");
 	if (np != NULL) {
 		const unsigned int *fp =
-		    get_property(np, "clock-frequency", NULL);
+		    of_get_property(np, "clock-frequency", NULL);
 		if (fp != NULL)
 			loops_per_jiffy = *fp / HZ;
 		else
@@ -145,26 +143,26 @@ static void __init mpc8568_mds_setup_arch(void)
 #endif	/* CONFIG_QUICC_ENGINE */
 }
 
-static struct of_device_id mpc8568_ids[] = {
+static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .type = "qe", },
 	{},
 };
 
-static int __init mpc8568_publish_devices(void)
+static int __init mpc85xx_publish_devices(void)
 {
-	if (!machine_is(mpc8568_mds))
+	if (!machine_is(mpc85xx_mds))
 		return 0;
 
 	/* Publish the QE devices */
-	of_platform_bus_probe(NULL,mpc8568_ids,NULL);
+	of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
 
 	return 0;
 }
-device_initcall(mpc8568_publish_devices);
+device_initcall(mpc85xx_publish_devices);
 
-static void __init mpc8568_mds_pic_init(void)
+static void __init mpc85xx_mds_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
@@ -207,7 +205,6 @@ static void __init mpc8568_mds_pic_init(void)
 
 	mpic_init(mpic);
 
-
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_node_by_type(NULL, "qeic");
 	if (!np)
@@ -218,27 +215,18 @@ static void __init mpc8568_mds_pic_init(void)
 #endif				/* CONFIG_QUICC_ENGINE */
 }
 
-
-static int __init mpc8568_mds_probe(void)
+static int __init mpc85xx_mds_probe(void)
 {
-	char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
-					  "model", NULL);
-	if (model == NULL)
-		return 0;
-	if (strcmp(model, "MPC8568EMDS"))
-		return 0;
-
-	DBG("MPC8568EMDS found\n");
+        unsigned long root = of_get_flat_dt_root();
 
-	return 1;
+        return of_flat_dt_is_compatible(root, "MPC85xxMDS");
 }
 
-
-define_machine(mpc8568_mds) {
-	.name		= "MPC8568E MDS",
-	.probe		= mpc8568_mds_probe,
-	.setup_arch	= mpc8568_mds_setup_arch,
-	.init_IRQ	= mpc8568_mds_pic_init,
+define_machine(mpc85xx_mds) {
+	.name		= "MPC85xx MDS",
+	.probe		= mpc85xx_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
 	.get_irq	= mpic_get_irq,
 	.restart	= mpc85xx_restart,
 	.calibrate_decr	= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c
index 05930eeb6e7f..48f17e23d771 100644
--- a/arch/powerpc/platforms/85xx/pci.c
+++ b/arch/powerpc/platforms/85xx/pci.c
@@ -51,7 +51,7 @@ int __init add_bridge(struct device_node *dev)
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
 	/* Get bus range if any */
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 0c70944d0e37..d1bcff500464 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,8 +1,6 @@
-menu "Platform Support"
-	depends on PPC_86xx
-
 choice
 	prompt "Machine Type"
+	depends on PPC_86xx
 	default MPC8641_HPCN
 
 config MPC8641_HPCN
@@ -14,20 +12,10 @@ config MPC8641_HPCN
 
 endchoice
 
-
 config MPC8641
 	bool
 	select PPC_INDIRECT_PCI
+	select PPC_INDIRECT_PCI_BE
 	select PPC_UDBG_16550
+	select MPIC
 	default y if MPC8641_HPCN
-
-config MPIC
-	bool
-	default y
-
-config PPC_INDIRECT_PCI_BE
-	bool
-	depends on PPC_86xx
-	default y
-
-endmenu
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 476a6eeee710..418fd8f4d268 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
-obj-$(CONFIG_PCI)		+= pci.o mpc86xx_pcie.o
+obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f4dd5f2f8a28..3d3d98f5bd4a 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -18,7 +18,6 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/root_dev.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -120,6 +119,8 @@ mpc86xx_hpcn_init_irq(void)
 	DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
 
 	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
 	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
 #endif
 }
@@ -348,7 +349,7 @@ mpc86xx_hpcn_setup_arch(void)
 	if (np != 0) {
 		const unsigned int *fp;
 
-		fp = get_property(np, "clock-frequency", NULL);
+		fp = of_get_property(np, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
@@ -365,12 +366,6 @@ mpc86xx_hpcn_setup_arch(void)
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
 
-#ifdef  CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
-
 #ifdef CONFIG_SMP
 	mpc86xx_smp_init();
 #endif
@@ -389,7 +384,7 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 
 	root = of_find_node_by_path("/");
 	if (root)
-		model = get_property(root, "model", NULL);
+		model = of_get_property(root, "model", NULL);
 	seq_printf(m, "Machine\t\t: %s\n", model);
 	of_node_put(root);
 
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
index 481e18ed5be9..8235c562661f 100644
--- a/arch/powerpc/platforms/86xx/pci.c
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -22,9 +22,9 @@
 #include <asm/atomic.h>
 #include <asm/io.h>
 #include <asm/prom.h>
-#include <asm/immap_86xx.h>
 #include <asm/pci-bridge.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pcie.h>
 
 #include "mpc86xx.h"
 
@@ -163,7 +163,7 @@ int __init add_bridge(struct device_node *dev)
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
 	/* Get bus range if any */
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int))
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index beea6834bb7e..39bb8c5ebe70 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -1,6 +1,3 @@
-menu "Platform support"
-        depends on PPC_8xx
-
 config FADS
 	bool
 
@@ -9,6 +6,7 @@ config CPM1
 
 choice
 	prompt "8xx Machine Type"
+	depends on PPC_8xx
 	depends on 8xx
 	default MPC885ADS
 
@@ -36,38 +34,36 @@ config MPC885ADS
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
-        depends on (FS_ENET && MPC885ADS)
-
-        config MPC8xx_SECOND_ETH
-        bool "Second Ethernet channel"
-        depends on MPC885ADS
-        default y
-        help
-          This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
-          The latter will use SCC1, for 885ADS you can select it below.
-
-        choice
-                prompt "Second Ethernet channel"
-                depends on MPC8xx_SECOND_ETH
-                default MPC8xx_SECOND_ETH_FEC2
-
-                config MPC8xx_SECOND_ETH_FEC2
-                bool "FEC2"
-                depends on MPC885ADS
-                help
-                  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
-                  (often 2-nd UART) will not work if this is enabled.
-
-                config MPC8xx_SECOND_ETH_SCC3
-                bool "SCC3"
-                depends on MPC885ADS
-                help
-                  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
-                  (often 1-nd UART) will not work if this is enabled.
-
-        endchoice
+	depends on (FS_ENET && MPC885ADS)
 
-endmenu
+	config MPC8xx_SECOND_ETH
+	bool "Second Ethernet channel"
+	depends on MPC885ADS
+	default y
+	help
+	  This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+	  The latter will use SCC1, for 885ADS you can select it below.
+
+	choice
+		prompt "Second Ethernet channel"
+		depends on MPC8xx_SECOND_ETH
+		default MPC8xx_SECOND_ETH_FEC2
+
+		config MPC8xx_SECOND_ETH_FEC2
+		bool "FEC2"
+		depends on MPC885ADS
+		help
+		  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+		  (often 2-nd UART) will not work if this is enabled.
+
+		config MPC8xx_SECOND_ETH_SCC3
+		bool "SCC3"
+		depends on MPC885ADS
+		help
+		  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+		  (often 1-nd UART) will not work if this is enabled.
+
+	endchoice
 
 endmenu
 
@@ -98,7 +94,7 @@ config 8xx_CPU6
 	  require workarounds for Linux (and most other OSes to work).  If you
 	  get a BUG() very early in boot, this might fix the problem.  For
 	  more details read the document entitled "MPC860 Family Device Errata
-	  Reference" on Motorola's website.  This option also incurs a
+	  Reference" on Freescale's website.  This option also incurs a
 	  performance hit.
 
 	  If in doubt, say N here.
@@ -135,4 +131,3 @@ config UCODE_PATCH
 	depends on !NO_UCODE_PATCH
 
 endmenu
-
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 9ed7125f0150..0901dbada350 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -85,17 +85,17 @@ init_internal_rtc(void)
 static int __init get_freq(char *name, unsigned long *val)
 {
         struct device_node *cpu;
-        unsigned int *fp;
+        const unsigned int *fp;
         int found = 0;
 
         /* The cpu node should have timebase and clock frequency properties */
         cpu = of_find_node_by_type(NULL, "cpu");
 
         if (cpu) {
-                fp = (unsigned int *)get_property(cpu, name, NULL);
+                fp = of_get_property(cpu, name, NULL);
                 if (fp) {
                         found = 1;
-                        *val = *fp++;
+                        *val = *fp;
                 }
 
                 of_node_put(cpu);
@@ -262,7 +262,7 @@ void mpc8xx_show_cpuinfo(struct seq_file *m)
 
 	root = of_find_node_by_path("/");
 	if (root)
-		model = get_property(root, "model", NULL);
+		model = of_get_property(root, "model", NULL);
 	seq_printf(m, "Machine\t\t: %s\n", model);
 	of_node_put(root);
 
diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h
index b5d19dd0619c..59bad2f9ae51 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads.h
+++ b/arch/powerpc/platforms/8xx/mpc86xads.h
@@ -37,7 +37,7 @@
 #define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
 #define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
 
-#define PCMCIA_MEM_ADDR		(uint)0xff020000)
+#define PCMCIA_MEM_ADDR		((uint)0xff020000)
 #define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
 
 /* Bits of interest in the BCSRs.
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index ef52ce701b0e..a35315af5c53 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -247,7 +247,7 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
 	}
 }
 
-int platform_device_skip(char *model, int id)
+int platform_device_skip(const char *model, int id)
 {
 	return 0;
 }
@@ -260,7 +260,7 @@ static void __init mpc86xads_setup_arch(void)
 	if (cpu != 0) {
 		const unsigned int *fp;
 
-		fp = get_property(cpu, "clock-frequency", NULL);
+		fp = of_get_property(cpu, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index 30cbebfe84c5..7c31aec284c2 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -37,7 +37,7 @@
 #define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
 #define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
 
-#define PCMCIA_MEM_ADDR		(uint)0xff020000)
+#define PCMCIA_MEM_ADDR		((uint)0xff020000)
 #define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
 
 /* Bits of interest in the BCSRs.
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index c5fefdf66c0a..a57b57785acd 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -322,7 +322,7 @@ void init_smc_ioports(struct fs_uart_platform_info *data)
 	}
 }
 
-int platform_device_skip(char *model, int id)
+int platform_device_skip(const char *model, int id)
 {
 #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
 	const char *dev = "FEC";
@@ -346,7 +346,7 @@ static void __init mpc885ads_setup_arch(void)
 	if (cpu != 0) {
 		const unsigned int *fp;
 
-		fp = get_property(cpu, "clock-frequency", NULL);
+		fp = of_get_property(cpu, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
new file mode 100644
index 000000000000..51e33347c147
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig
@@ -0,0 +1,259 @@
+menu "Platform support"
+
+choice
+	prompt "Machine type"
+	depends on PPC64 || CLASSIC32
+	default PPC_MULTIPLATFORM
+
+config PPC_MULTIPLATFORM
+	bool "Generic desktop/server/laptop"
+	help
+	  Select this option if configuring for an IBM pSeries or
+	  RS/6000 machine, an Apple machine, or a PReP, CHRP,
+	  Maple or Cell-based machine.
+
+config EMBEDDED6xx
+	bool "Embedded 6xx/7xx/7xxx-based board"
+	depends on PPC32 && (BROKEN||BROKEN_ON_SMP)
+
+config APUS
+	bool "Amiga-APUS"
+	depends on PPC32 && BROKEN
+	help
+	  Select APUS if configuring for a PowerUP Amiga.
+	  More information is available at:
+	  <http://linux-apus.sourceforge.net/>.
+endchoice
+
+source "arch/powerpc/platforms/pseries/Kconfig"
+source "arch/powerpc/platforms/iseries/Kconfig"
+source "arch/powerpc/platforms/chrp/Kconfig"
+source "arch/powerpc/platforms/52xx/Kconfig"
+source "arch/powerpc/platforms/powermac/Kconfig"
+source "arch/powerpc/platforms/prep/Kconfig"
+source "arch/powerpc/platforms/maple/Kconfig"
+source "arch/powerpc/platforms/pasemi/Kconfig"
+source "arch/powerpc/platforms/celleb/Kconfig"
+source "arch/powerpc/platforms/ps3/Kconfig"
+source "arch/powerpc/platforms/cell/Kconfig"
+source "arch/powerpc/platforms/8xx/Kconfig"
+source "arch/powerpc/platforms/82xx/Kconfig"
+source "arch/powerpc/platforms/83xx/Kconfig"
+source "arch/powerpc/platforms/85xx/Kconfig"
+source "arch/powerpc/platforms/86xx/Kconfig"
+source "arch/powerpc/platforms/embedded6xx/Kconfig"
+#source "arch/powerpc/platforms/4xx/Kconfig
+
+config PPC_NATIVE
+	bool
+	depends on PPC_MULTIPLATFORM
+	help
+	  Support for running natively on the hardware, i.e. without
+	  a hypervisor. This option is not user-selectable but should
+	  be selected by all platforms that need it.
+
+config UDBG_RTAS_CONSOLE
+	bool "RTAS based debug console"
+	depends on PPC_RTAS
+	default n
+
+config PPC_UDBG_BEAT
+	bool "BEAT based debug console"
+	depends on PPC_CELLEB
+	default n
+
+config XICS
+	depends on PPC_PSERIES
+	bool
+	default y
+
+config MPIC
+	bool
+	default n
+
+config MPIC_WEIRD
+	bool
+	default n
+
+config PPC_I8259
+	bool
+	default n
+
+config U3_DART
+	bool
+	depends on PPC_MULTIPLATFORM && PPC64
+	default n
+
+config PPC_RTAS
+	bool
+	default n
+
+config RTAS_ERROR_LOGGING
+	bool
+	depends on PPC_RTAS
+	default n
+
+config RTAS_PROC
+	bool "Proc interface to RTAS"
+	depends on PPC_RTAS
+	default y
+
+config RTAS_FLASH
+	tristate "Firmware flash interface"
+	depends on PPC64 && RTAS_PROC
+
+config PPC_PMI
+	tristate "Support for PMI"
+	depends PPC_IBM_CELL_BLADE
+	help
+	  PMI (Platform Management Interrupt) is a way to
+	  communicate with the BMC (Baseboard Mangement Controller).
+	  It is used in some IBM Cell blades.
+	default m
+
+config MMIO_NVRAM
+	bool
+	default n
+
+config MPIC_U3_HT_IRQS
+	bool
+	depends on PPC_MAPLE
+	default y
+
+config IBMVIO
+	depends on PPC_PSERIES || PPC_ISERIES
+	bool
+	default y
+
+config IBMEBUS
+	depends on PPC_PSERIES
+	bool "Support for GX bus based adapters"
+	help
+	  Bus device driver for GX bus based adapters.
+
+config PPC_MPC106
+	bool
+	default n
+
+config PPC_970_NAP
+	bool
+	default n
+
+config PPC_INDIRECT_IO
+	bool
+	select GENERIC_IOMAP
+	default n
+
+config GENERIC_IOMAP
+	bool
+	default n
+
+source "drivers/cpufreq/Kconfig"
+
+menu "CPU Frequency drivers"
+	depends on CPU_FREQ
+
+config CPU_FREQ_PMAC
+	bool "Support for Apple PowerBooks"
+	depends on ADB_PMU && PPC32
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple PowerBooks,
+	  this currently includes some models of iBook & Titanium
+	  PowerBook.
+
+config CPU_FREQ_PMAC64
+	bool "Support for some Apple G5s"
+	depends on PPC_PMAC && PPC64
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for frequency switching on Apple iMac G5,
+	  and some of the more recent desktop G5 machines as well.
+
+config PPC_PASEMI_CPUFREQ
+	bool "Support for PA Semi PWRficient"
+	depends on PPC_PASEMI
+	default y
+	select CPU_FREQ_TABLE
+	help
+	  This adds the support for frequency switching on PA Semi
+	  PWRficient processors.
+
+endmenu
+
+config PPC601_SYNC_FIX
+	bool "Workarounds for PPC601 bugs"
+	depends on 6xx && (PPC_PREP || PPC_PMAC)
+	help
+	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
+	  mean that extra synchronization instructions are required near
+	  certain instructions, typically those that make major changes to the
+	  CPU state.  These extra instructions reduce performance slightly.
+	  If you say N here, these extra instructions will not be included,
+	  resulting in a kernel which will run faster but may not run at all
+	  on some systems with the PPC601 chip.
+
+	  If in doubt, say Y here.
+
+config TAU
+	bool "On-chip CPU temperature sensor support"
+	depends on CLASSIC32
+	help
+	  G3 and G4 processors have an on-chip temperature sensor called the
+	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+	  temperature within 2-4 degrees Celsius. This option shows the current
+	  on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+	  Unfortunately, on some chip revisions, this sensor is very inaccurate
+	  and in many cases, does not work at all, so don't assume the cpu
+	  temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+	bool "Interrupt driven TAU driver (DANGEROUS)"
+	depends on TAU
+	---help---
+	  The TAU supports an interrupt driven mode which causes an interrupt
+	  whenever the temperature goes out of range. This is the fastest way
+	  to get notified the temp has exceeded a range. With this option off,
+	  a timer is used to re-check the temperature periodically.
+
+	  However, on some cpus it appears that the TAU interrupt hardware
+	  is buggy and can cause a situation which would lead unexplained hard
+	  lockups.
+
+	  Unless you are extending the TAU driver, or enjoy kernel/hardware
+	  debugging, leave this option off.
+
+config TAU_AVERAGE
+	bool "Average high and low temp"
+	depends on TAU
+	---help---
+	  The TAU hardware can compare the temperature to an upper and lower
+	  bound.  The default behavior is to show both the upper and lower
+	  bound in /proc/cpuinfo. If the range is large, the temperature is
+	  either changing a lot, or the TAU hardware is broken (likely on some
+	  G4's). If the range is small (around 4 degrees), the temperature is
+	  relatively stable.  If you say Y here, a single temperature value,
+	  halfway between the upper and lower bounds, will be reported in
+	  /proc/cpuinfo.
+
+	  If in doubt, say N here.
+
+config QUICC_ENGINE
+	bool
+	help
+	  The QUICC Engine (QE) is a new generation of communications
+	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+	  Selecting this option means that you wish to build a kernel
+	  for a machine with a QE coprocessor.
+
+config CPM2
+	bool
+	default n
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Freescale.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it (826x, 827x, 8560).
+
+endmenu
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 06a85b704331..82551770917c 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -1,3 +1,26 @@
+config PPC_CELL
+	bool
+	default n
+
+config PPC_CELL_NATIVE
+	bool
+	select PPC_CELL
+	select PPC_DCR_MMIO
+	select PPC_OF_PLATFORM_PCI
+	select PPC_INDIRECT_IO
+	select PPC_NATIVE
+	select MPIC
+	default n
+
+config PPC_IBM_CELL_BLADE
+	bool "IBM Cell Blade"
+	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_CELL_NATIVE
+	select PPC_RTAS
+	select MMIO_NVRAM
+	select PPC_UDBG_16550
+	select UDBG_RTAS_CONSOLE
+
 menu "Cell Broadband Engine options"
 	depends on PPC_CELL
 
@@ -18,6 +41,7 @@ config SPU_BASE
 
 config CBE_RAS
 	bool "RAS features for bare metal Cell BE"
+	depends on PPC_CELL_NATIVE
 	default y
 
 config CBE_THERM
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
index a3850fd1e94c..f9ac3fe3be97 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c
@@ -25,9 +25,12 @@
 
 #include <asm/hw_irq.h>
 #include <asm/io.h>
+#include <asm/machdep.h>
 #include <asm/processor.h>
 #include <asm/prom.h>
 #include <asm/time.h>
+#include <asm/pmi.h>
+#include <asm/of_platform.h>
 
 #include "cbe_regs.h"
 
@@ -68,6 +71,38 @@ static u64 MIC_Slow_Next_Timer_table[] = {
  * hardware specific functions
  */
 
+static struct of_device *pmi_dev;
+
+static int set_pmode_pmi(int cpu, unsigned int pmode)
+{
+	int ret;
+	pmi_message_t pmi_msg;
+#ifdef DEBUG
+	u64 time;
+#endif
+
+	pmi_msg.type = PMI_TYPE_FREQ_CHANGE;
+	pmi_msg.data1 =	cbe_cpu_to_node(cpu);
+	pmi_msg.data2 = pmode;
+
+#ifdef DEBUG
+	time = (u64) get_cycles();
+#endif
+
+	pmi_send_message(pmi_dev, pmi_msg);
+	ret = pmi_msg.data2;
+
+	pr_debug("PMI returned slow mode %d\n", ret);
+
+#ifdef DEBUG
+	time = (u64) get_cycles() - time; /* actual cycles (not cpu cycles!) */
+	time = 1000000000 * time / CLOCK_TICK_RATE; /* time in ns (10^-9) */
+	pr_debug("had to wait %lu ns for a transition\n", time);
+#endif
+	return ret;
+}
+
+
 static int get_pmode(int cpu)
 {
 	int ret;
@@ -79,7 +114,7 @@ static int get_pmode(int cpu)
 	return ret;
 }
 
-static int set_pmode(int cpu, unsigned int pmode)
+static int set_pmode_reg(int cpu, unsigned int pmode)
 {
 	struct cbe_pmd_regs __iomem *pmd_regs;
 	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
@@ -120,37 +155,71 @@ static int set_pmode(int cpu, unsigned int pmode)
 	return 0;
 }
 
+static int set_pmode(int cpu, unsigned int slow_mode) {
+	if (pmi_dev)
+		return set_pmode_pmi(cpu, slow_mode);
+	else
+		return set_pmode_reg(cpu, slow_mode);
+}
+
+static void cbe_cpufreq_handle_pmi(struct of_device *dev, pmi_message_t pmi_msg)
+{
+	struct cpufreq_policy policy;
+	u8 cpu;
+	u8 cbe_pmode_new;
+
+	BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
+
+	cpu = cbe_node_to_cpu(pmi_msg.data1);
+	cbe_pmode_new = pmi_msg.data2;
+
+	cpufreq_get_policy(&policy, cpu);
+
+	policy.max = min(policy.max, cbe_freqs[cbe_pmode_new].frequency);
+	policy.min = min(policy.min, policy.max);
+
+	pr_debug("cbe_handle_pmi: new policy.min=%d policy.max=%d\n", policy.min, policy.max);
+	cpufreq_set_policy(&policy);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+	.type			= PMI_TYPE_FREQ_CHANGE,
+	.handle_pmi_message	= cbe_cpufreq_handle_pmi,
+};
+
+
 /*
  * cpufreq functions
  */
 
-static int cbe_cpufreq_cpu_init (struct cpufreq_policy *policy)
+static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-	u32 *max_freq;
+	const u32 *max_freqp;
+	u32 max_freq;
 	int i, cur_pmode;
 	struct device_node *cpu;
 
 	cpu = of_get_cpu_node(policy->cpu, NULL);
 
-	if(!cpu)
+	if (!cpu)
 		return -ENODEV;
 
 	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
 
-	max_freq = (u32*) get_property(cpu, "clock-frequency", NULL);
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
 
-	if(!max_freq)
+	if (!max_freqp)
 		return -EINVAL;
 
-	// we need the freq in kHz
-	*max_freq /= 1000;
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
 
-	pr_debug("max clock-frequency is at %u kHz\n", *max_freq);
+	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
 	pr_debug("initializing frequency table\n");
 
-	// initialize frequency table
+	/* initialize frequency table */
 	for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		cbe_freqs[i].frequency = *max_freq / cbe_freqs[i].index;
+		cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index;
 		pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
 	}
 
@@ -167,10 +236,10 @@ static int cbe_cpufreq_cpu_init (struct cpufreq_policy *policy)
 	policy->cpus = cpu_sibling_map[policy->cpu];
 #endif
 
-	cpufreq_frequency_table_get_attr (cbe_freqs, policy->cpu);
+	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
 
 	/* this ensures that policy->cpuinfo_min and policy->cpuinfo_max are set correctly */
-	return cpufreq_frequency_table_cpuinfo (policy, cbe_freqs);
+	return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs);
 }
 
 static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
@@ -202,7 +271,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, unsigned int target
 	freqs.new = cbe_freqs[cbe_pmode_new].frequency;
 	freqs.cpu = policy->cpu;
 
-	mutex_lock (&cbe_switch_mutex);
+	mutex_lock(&cbe_switch_mutex);
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
@@ -233,11 +302,26 @@ static struct cpufreq_driver cbe_cpufreq_driver = {
 
 static int __init cbe_cpufreq_init(void)
 {
+	struct device_node *np;
+
+	if (!machine_is(cell))
+		return -ENODEV;
+
+	np = of_find_node_by_type(NULL, "ibm,pmi");
+
+	pmi_dev = of_find_device_by_node(np);
+
+	if (pmi_dev)
+		pmi_register_handler(pmi_dev, &cbe_pmi_handler);
+
 	return cpufreq_register_driver(&cbe_cpufreq_driver);
 }
 
 static void __exit cbe_cpufreq_exit(void)
 {
+	if (pmi_dev)
+		pmi_unregister_handler(pmi_dev, &cbe_pmi_handler);
+
 	cpufreq_unregister_driver(&cbe_cpufreq_driver);
 }
 
diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c
index 9a0ee62691d5..12c9674b4b1f 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.c
+++ b/arch/powerpc/platforms/cell/cbe_regs.c
@@ -14,6 +14,8 @@
 #include <asm/pgtable.h>
 #include <asm/prom.h>
 #include <asm/ptrace.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
 
 #include "cbe_regs.h"
 
@@ -27,6 +29,7 @@
 static struct cbe_regs_map
 {
 	struct device_node *cpu_node;
+	struct device_node *be_node;
 	struct cbe_pmd_regs __iomem *pmd_regs;
 	struct cbe_iic_regs __iomem *iic_regs;
 	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
@@ -37,30 +40,43 @@ static int cbe_regs_map_count;
 static struct cbe_thread_map
 {
 	struct device_node *cpu_node;
+	struct device_node *be_node;
 	struct cbe_regs_map *regs;
+	unsigned int thread_id;
+	unsigned int cbe_id;
 } cbe_thread_map[NR_CPUS];
 
+static cpumask_t cbe_local_mask[MAX_CBE] = { [0 ... MAX_CBE-1] = CPU_MASK_NONE };
+static cpumask_t cbe_first_online_cpu = CPU_MASK_NONE;
+
 static struct cbe_regs_map *cbe_find_map(struct device_node *np)
 {
 	int i;
 	struct device_node *tmp_np;
 
-	if (strcasecmp(np->type, "spe") == 0) {
-		if (np->data == NULL) {
-			/* walk up path until cpu node was found */
-			tmp_np = np->parent;
-			while (tmp_np != NULL && strcasecmp(tmp_np->type, "cpu") != 0)
-				tmp_np = tmp_np->parent;
+	if (strcasecmp(np->type, "spe")) {
+		for (i = 0; i < cbe_regs_map_count; i++)
+			if (cbe_regs_maps[i].cpu_node == np ||
+			    cbe_regs_maps[i].be_node == np)
+				return &cbe_regs_maps[i];
+		return NULL;
+	}
 
-			np->data = cbe_find_map(tmp_np);
-		}
+	if (np->data)
 		return np->data;
-	}
 
-	for (i = 0; i < cbe_regs_map_count; i++)
-		if (cbe_regs_maps[i].cpu_node == np)
-			return &cbe_regs_maps[i];
-	return NULL;
+	/* walk up path until cpu or be node was found */
+	tmp_np = np;
+	do {
+		tmp_np = tmp_np->parent;
+		/* on a correct devicetree we wont get up to root */
+		BUG_ON(!tmp_np);
+	} while (strcasecmp(tmp_np->type, "cpu") &&
+		 strcasecmp(tmp_np->type, "be"));
+
+	np->data = cbe_find_map(tmp_np);
+
+	return np->data;
 }
 
 struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np)
@@ -130,38 +146,105 @@ struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu)
 }
 EXPORT_SYMBOL_GPL(cbe_get_cpu_mic_tm_regs);
 
-/* FIXME
- * This is little more than a stub at the moment.  It should be
- * fleshed out so that it works for both SMT and non-SMT, no
- * matter if the passed cpu is odd or even.
- * For SMT enabled, returns 0 for even-numbered cpu; otherwise 1.
- * For SMT disabled, returns 0 for all cpus.
- */
 u32 cbe_get_hw_thread_id(int cpu)
 {
-	return (cpu & 1);
+	return cbe_thread_map[cpu].thread_id;
 }
 EXPORT_SYMBOL_GPL(cbe_get_hw_thread_id);
 
-void __init cbe_regs_init(void)
+u32 cbe_cpu_to_node(int cpu)
 {
-	int i;
-	struct device_node *cpu;
+	return cbe_thread_map[cpu].cbe_id;
+}
+EXPORT_SYMBOL_GPL(cbe_cpu_to_node);
 
-	/* Build local fast map of CPUs */
-	for_each_possible_cpu(i)
-		cbe_thread_map[i].cpu_node = of_get_cpu_node(i, NULL);
+u32 cbe_node_to_cpu(int node)
+{
+	return find_first_bit( (unsigned long *) &cbe_local_mask[node], sizeof(cpumask_t));
+}
+EXPORT_SYMBOL_GPL(cbe_node_to_cpu);
 
-	/* Find maps for each device tree CPU */
-	for_each_node_by_type(cpu, "cpu") {
-		struct cbe_regs_map *map = &cbe_regs_maps[cbe_regs_map_count++];
+static struct device_node *cbe_get_be_node(int cpu_id)
+{
+	struct device_node *np;
+
+	for_each_node_by_type (np, "be") {
+		int len,i;
+		const phandle *cpu_handle;
+
+		cpu_handle = of_get_property(np, "cpus", &len);
+
+		for (i=0; i<len; i++)
+			if (of_find_node_by_phandle(cpu_handle[i]) == of_get_cpu_node(cpu_id, NULL))
+				return np;
+	}
+
+	return NULL;
+}
+
+void __init cbe_fill_regs_map(struct cbe_regs_map *map)
+{
+	if(map->be_node) {
+		struct device_node *be, *np;
+
+		be = map->be_node;
+
+		for_each_node_by_type(np, "pervasive")
+			if (of_get_parent(np) == be)
+				map->pmd_regs = of_iomap(np, 0);
+
+		for_each_node_by_type(np, "CBEA-Internal-Interrupt-Controller")
+			if (of_get_parent(np) == be)
+				map->iic_regs = of_iomap(np, 2);
 
+		for_each_node_by_type(np, "mic-tm")
+			if (of_get_parent(np) == be)
+				map->mic_tm_regs = of_iomap(np, 0);
+	} else {
+		struct device_node *cpu;
 		/* That hack must die die die ! */
 		const struct address_prop {
 			unsigned long address;
 			unsigned int len;
 		} __attribute__((packed)) *prop;
 
+		cpu = map->cpu_node;
+
+		prop = of_get_property(cpu, "pervasive", NULL);
+		if (prop != NULL)
+			map->pmd_regs = ioremap(prop->address, prop->len);
+
+		prop = of_get_property(cpu, "iic", NULL);
+		if (prop != NULL)
+			map->iic_regs = ioremap(prop->address, prop->len);
+
+		prop = of_get_property(cpu, "mic-tm", NULL);
+		if (prop != NULL)
+			map->mic_tm_regs = ioremap(prop->address, prop->len);
+	}
+}
+
+
+void __init cbe_regs_init(void)
+{
+	int i;
+	unsigned int thread_id;
+	struct device_node *cpu;
+
+	/* Build local fast map of CPUs */
+	for_each_possible_cpu(i) {
+		cbe_thread_map[i].cpu_node = of_get_cpu_node(i, &thread_id);
+		cbe_thread_map[i].be_node = cbe_get_be_node(i);
+		cbe_thread_map[i].thread_id = thread_id;
+	}
+
+	/* Find maps for each device tree CPU */
+	for_each_node_by_type(cpu, "cpu") {
+		struct cbe_regs_map *map;
+		unsigned int cbe_id;
+
+		cbe_id = cbe_regs_map_count++;
+		map = &cbe_regs_maps[cbe_id];
 
 		if (cbe_regs_map_count > MAX_CBE) {
 			printk(KERN_ERR "cbe_regs: More BE chips than supported"
@@ -170,22 +253,21 @@ void __init cbe_regs_init(void)
 			return;
 		}
 		map->cpu_node = cpu;
-		for_each_possible_cpu(i)
-			if (cbe_thread_map[i].cpu_node == cpu)
-				cbe_thread_map[i].regs = map;
 
-		prop = get_property(cpu, "pervasive", NULL);
-		if (prop != NULL)
-			map->pmd_regs = ioremap(prop->address, prop->len);
+		for_each_possible_cpu(i) {
+			struct cbe_thread_map *thread = &cbe_thread_map[i];
 
-		prop = get_property(cpu, "iic", NULL);
-		if (prop != NULL)
-			map->iic_regs = ioremap(prop->address, prop->len);
+			if (thread->cpu_node == cpu) {
+				thread->regs = map;
+				thread->cbe_id = cbe_id;
+				map->be_node = thread->be_node;
+				cpu_set(i, cbe_local_mask[cbe_id]);
+				if(thread->thread_id == 0)
+					cpu_set(i, cbe_first_online_cpu);
+			}
+		}
 
-		prop = (struct address_prop *)get_property(cpu, "mic-tm",
-							   NULL);
-		if (prop != NULL)
-			map->mic_tm_regs = ioremap(prop->address, prop->len);
+		cbe_fill_regs_map(map);
 	}
 }
 
diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h
index 440a7ecc66ea..17d597144877 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.h
+++ b/arch/powerpc/platforms/cell/cbe_regs.h
@@ -255,6 +255,11 @@ struct cbe_mic_tm_regs {
 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
 
+/* some utility functions to deal with SMT */
+extern u32 cbe_get_hw_thread_id(int cpu);
+extern u32 cbe_cpu_to_node(int cpu);
+extern u32 cbe_node_to_cpu(int node);
+
 /* Init this module early */
 extern void cbe_regs_init(void);
 
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 70e0d968d30f..f370f0fa6f4c 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -1,6 +1,31 @@
 /*
  * thermal support for the cell processor
  *
+ * This module adds some sysfs attributes to cpu and spu nodes.
+ * Base for measurements are the digital thermal sensors (DTS)
+ * located on the chip.
+ * The accuracy is 2 degrees, starting from 65 up to 125 degrees celsius
+ * The attributes can be found under
+ * /sys/devices/system/cpu/cpuX/thermal
+ * /sys/devices/system/spu/spuX/thermal
+ *
+ * The following attributes are added for each node:
+ * temperature:
+ *	contains the current temperature measured by the DTS
+ * throttle_begin:
+ *	throttling begins when temperature is greater or equal to
+ *	throttle_begin. Setting this value to 125 prevents throttling.
+ * throttle_end:
+ *	throttling is being ceased, if the temperature is lower than
+ *	throttle_end. Due to a delay between applying throttling and
+ *	a reduced temperature this value should be less than throttle_begin.
+ *	A value equal to throttle_begin provides only a very little hysteresis.
+ * throttle_full_stop:
+ *	If the temperatrue is greater or equal to throttle_full_stop,
+ *	full throttling is applied to the cpu or spu. This value should be
+ *	greater than throttle_begin and throttle_end. Setting this value to
+ *	65 prevents the unit from running code at all.
+ *
  * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
  *
  * Author: Christian Krafft <krafft@de.ibm.com>
@@ -31,6 +56,26 @@
 #include "cbe_regs.h"
 #include "spu_priv1_mmio.h"
 
+#define TEMP_MIN 65
+#define TEMP_MAX 125
+
+#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode)			\
+struct sysdev_attribute attr_ ## _prefix ## _ ## _name = {	\
+	.attr = { .name = __stringify(_name), .mode = _mode },	\
+	.show	= _prefix ## _show_ ## _name,			\
+	.store	= _prefix ## _store_ ## _name,			\
+};
+
+static inline u8 reg_to_temp(u8 reg_value)
+{
+	return ((reg_value & 0x3f) << 1) + TEMP_MIN;
+}
+
+static inline u8 temp_to_reg(u8 temp)
+{
+	return ((temp - TEMP_MIN) >> 1) & 0x3f;
+}
+
 static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
 {
 	struct spu *spu;
@@ -43,14 +88,14 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
 /* returns the value for a given spu in a given register */
 static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
 {
-	unsigned int *id;
+	const unsigned int *id;
 	union spe_reg value;
 	struct spu *spu;
 
 	/* getting the id from the reg attribute will not work on future device-tree layouts
 	 * in future we should store the id to the spu struct and use it here */
 	spu = container_of(sysdev, struct spu, sysdev);
-	id = (unsigned int *)get_property(spu_devnode(spu), "reg", NULL);
+	id = of_get_property(spu_devnode(spu), "reg", NULL);
 	value.val = in_be64(&reg->val);
 
 	return value.spe[*id];
@@ -58,20 +103,81 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom
 
 static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
 {
-	int value;
+	u8 value;
 	struct cbe_pmd_regs __iomem *pmd_regs;
 
 	pmd_regs = get_pmd_regs(sysdev);
 
 	value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1);
-	/* clear all other bits */
+
+	return sprintf(buf, "%d\n", reg_to_temp(value));
+}
+
+static ssize_t show_throttle(struct cbe_pmd_regs __iomem *pmd_regs, char *buf, int pos)
+{
+	u64 value;
+
+	value = in_be64(&pmd_regs->tm_tpr.val);
+	/* access the corresponding byte */
+	value >>= pos;
 	value &= 0x3F;
-	/* temp is stored in steps of 2 degrees */
-	value *= 2;
-	/* base temp is 65 degrees */
-	value += 65;
 
-	return sprintf(buf, "%d\n", (int) value);
+	return sprintf(buf, "%d\n", reg_to_temp(value));
+}
+
+static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char *buf, size_t size, int pos)
+{
+	u64 reg_value;
+	int temp;
+	u64 new_value;
+	int ret;
+
+	ret = sscanf(buf, "%u", &temp);
+
+	if (ret != 1 || temp < TEMP_MIN || temp > TEMP_MAX)
+		return -EINVAL;
+
+	new_value = temp_to_reg(temp);
+
+	reg_value = in_be64(&pmd_regs->tm_tpr.val);
+
+	/* zero out bits for new value */
+	reg_value &= ~(0xffull << pos);
+	/* set bits to new value */
+	reg_value |= new_value << pos;
+
+	out_be64(&pmd_regs->tm_tpr.val, reg_value);
+	return size;
+}
+
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+{
+	return show_throttle(get_pmd_regs(sysdev), buf, 0);
+}
+
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+{
+	return show_throttle(get_pmd_regs(sysdev), buf, 8);
+}
+
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+{
+	return show_throttle(get_pmd_regs(sysdev), buf, 16);
+}
+
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+{
+	return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
+}
+
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+{
+	return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
+}
+
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+{
+	return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
 }
 
 static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
@@ -82,16 +188,9 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 	pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
 	value = in_be64(&pmd_regs->ts_ctsr2);
 
-	/* access the corresponding byte */
-	value >>= pos;
-	/* clear all other bits */
-	value &= 0x3F;
-	/* temp is stored in steps of 2 degrees */
-	value *= 2;
-	/* base temp is 65 degrees */
-	value += 65;
+	value = (value >> pos) & 0x3f;
 
-	return sprintf(buf, "%d\n", (int) value);
+	return sprintf(buf, "%d\n", reg_to_temp(value));
 }
 
 
@@ -108,13 +207,52 @@ static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
 	return ppe_show_temp(sysdev, buf, 0);
 }
 
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+{
+	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
+}
+
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+{
+	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
+}
+
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+{
+	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
+}
+
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+{
+	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
+}
+
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+{
+	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
+}
+
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+{
+	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
+}
+
+
 static struct sysdev_attribute attr_spu_temperature = {
 	.attr = {.name = "temperature", .mode = 0400 },
 	.show = spu_show_temp,
 };
 
+static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600);
+static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600);
+static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600);
+
+
 static struct attribute *spu_attributes[] = {
 	&attr_spu_temperature.attr,
+	&attr_spu_throttle_end.attr,
+	&attr_spu_throttle_begin.attr,
+	&attr_spu_throttle_full_stop.attr,
 	NULL,
 };
 
@@ -133,9 +271,16 @@ static struct sysdev_attribute attr_ppe_temperature1 = {
 	.show = ppe_show_temp1,
 };
 
+static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600);
+static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600);
+static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
+
 static struct attribute *ppe_attributes[] = {
 	&attr_ppe_temperature0.attr,
 	&attr_ppe_temperature1.attr,
+	&attr_ppe_throttle_end.attr,
+	&attr_ppe_throttle_begin.attr,
+	&attr_ppe_throttle_full_stop.attr,
 	NULL,
 };
 
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 6666d037eb44..4fc4e92775d0 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -261,7 +261,7 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
 		return -ENODEV;
 	if (intsize != 1)
 		return -ENODEV;
-	val = get_property(ct, "#interrupt-cells", NULL);
+	val = of_get_property(ct, "#interrupt-cells", NULL);
 	if (val == NULL || *val != 1)
 		return -ENODEV;
 
@@ -327,7 +327,7 @@ static int __init setup_iic(void)
 		if (!device_is_compatible(dn,
 				     "IBM,CBEA-Internal-Interrupt-Controller"))
 			continue;
-		np = get_property(dn, "ibm,interrupt-server-ranges", NULL);
+		np = of_get_property(dn, "ibm,interrupt-server-ranges", NULL);
 		if (np == NULL) {
 			printk(KERN_WARNING "IIC: CPU association not found\n");
 			of_node_put(dn);
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 7c73128305ec..d68d920eb2c4 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -318,7 +318,7 @@ static int __init spider_pci_workaround_init(void)
 	 */
 	list_for_each_entry(phb, &hose_list, list_node) {
 		struct device_node *np = phb->arch_data;
-		const char *model = get_property(np, "model", NULL);
+		const char *model = of_get_property(np, "model", NULL);
 
 		/* If no model property or name isn't exactly "pci", skip */
 		if (model == NULL || strcmp(np->name, "pci"))
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 67d617b60a23..760caa76841a 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -291,9 +291,9 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base)
 		const unsigned int *nidp;
 		const unsigned long *tmp;
 
-		nidp = get_property(np, "node-id", NULL);
+		nidp = of_get_property(np, "node-id", NULL);
 		if (nidp && *nidp == nid) {
-			tmp = get_property(np, "ioc-translation", NULL);
+			tmp = of_get_property(np, "ioc-translation", NULL);
 			if (tmp) {
 				*base = *tmp;
 				of_node_put(np);
@@ -430,7 +430,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 	struct iommu_window *window;
 	const unsigned int *ioid;
 
-	ioid = get_property(np, "ioid", NULL);
+	ioid = of_get_property(np, "ioid", NULL);
 	if (ioid == NULL)
 		printk(KERN_WARNING "iommu: missing ioid for %s using 0\n",
 		       np->full_name);
@@ -496,7 +496,7 @@ static void cell_dma_dev_setup(struct device *dev)
 	struct dev_archdata *archdata = &dev->archdata;
 
 	/* If we run without iommu, no need to do anything */
-	if (pci_dma_ops == &dma_direct_ops)
+	if (get_pci_dma_ops() == &dma_direct_ops)
 		return;
 
 	/* Current implementation uses the first window available in that
@@ -530,7 +530,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action,
 		return 0;
 
 	/* We use the PCI DMA ops */
-	dev->archdata.dma_ops = pci_dma_ops;
+	dev->archdata.dma_ops = get_pci_dma_ops();
 
 	cell_dma_dev_setup(dev);
 
@@ -549,7 +549,7 @@ static int __init cell_iommu_get_window(struct device_node *np,
 	unsigned long index;
 
 	/* Use ibm,dma-window if available, else, hard code ! */
-	dma_window = get_property(np, "ibm,dma-window", NULL);
+	dma_window = of_get_property(np, "ibm,dma-window", NULL);
 	if (dma_window == NULL) {
 		*base = 0;
 		*size = 0x80000000u;
@@ -646,7 +646,7 @@ static int __init cell_iommu_init_disabled(void)
 	unsigned long base = 0, size;
 
 	/* When no iommu is present, we use direct DMA ops */
-	pci_dma_ops = &dma_direct_ops;
+	set_pci_dma_ops(&dma_direct_ops);
 
 	/* First make sure all IOC translation is turned off */
 	cell_disable_iommus();
@@ -734,7 +734,7 @@ static int __init cell_iommu_init(void)
 	}
 
 	/* Setup default PCI iommu ops */
-	pci_dma_ops = &dma_iommu_ops;
+	set_pci_dma_ops(&dma_iommu_ops);
 
  bail:
 	/* Register callbacks on OF platform device addition/removal
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 0984c7071695..3961a085b432 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -3,11 +3,13 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/smp.h>
+#include <linux/reboot.h>
 
 #include <asm/reg.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/machdep.h>
+#include <asm/rtas.h>
 
 #include "ras.h"
 #include "cbe_regs.h"
@@ -82,6 +84,164 @@ static int cbe_machine_check_handler(struct pt_regs *regs)
 	return 0;
 }
 
+struct ptcal_area {
+	struct list_head list;
+	int nid;
+	int order;
+	struct page *pages;
+};
+
+static LIST_HEAD(ptcal_list);
+
+static int ptcal_start_tok, ptcal_stop_tok;
+
+static int __init cbe_ptcal_enable_on_node(int nid, int order)
+{
+	struct ptcal_area *area;
+	int ret = -ENOMEM;
+	unsigned long addr;
+
+#ifdef CONFIG_CRASH_DUMP
+	rtas_call(ptcal_stop_tok, 1, 1, NULL, nid);
+#endif
+
+	area = kmalloc(sizeof(*area), GFP_KERNEL);
+	if (!area)
+		goto out_err;
+
+	area->nid = nid;
+	area->order = order;
+	area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+
+	if (!area->pages)
+		goto out_free_area;
+
+	addr = __pa(page_address(area->pages));
+
+	ret = -EIO;
+	if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
+				(unsigned int)(addr >> 32),
+				(unsigned int)(addr & 0xffffffff))) {
+		printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
+				__FUNCTION__, nid);
+		goto out_free_pages;
+	}
+
+	list_add(&area->list, &ptcal_list);
+
+	return 0;
+
+out_free_pages:
+	__free_pages(area->pages, area->order);
+out_free_area:
+	kfree(area);
+out_err:
+	return ret;
+}
+
+static int __init cbe_ptcal_enable(void)
+{
+	const u32 *size;
+	struct device_node *np;
+	int order, found_mic = 0;
+
+	np = of_find_node_by_path("/rtas");
+	if (!np)
+		return -ENODEV;
+
+	size = of_get_property(np, "ibm,cbe-ptcal-size", NULL);
+	if (!size)
+		return -ENODEV;
+
+	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
+	order = get_order(*size);
+	of_node_put(np);
+
+	/* support for malta device trees, with be@/mic@ nodes */
+	for_each_node_by_type(np, "mic-tm") {
+		cbe_ptcal_enable_on_node(of_node_to_nid(np), order);
+		found_mic = 1;
+	}
+
+	if (found_mic)
+		return 0;
+
+	/* support for older device tree - use cpu nodes */
+	for_each_node_by_type(np, "cpu") {
+		const u32 *nid = of_get_property(np, "node-id", NULL);
+		if (!nid) {
+			printk(KERN_ERR "%s: node %s is missing node-id?\n",
+					__FUNCTION__, np->full_name);
+			continue;
+		}
+		cbe_ptcal_enable_on_node(*nid, order);
+		found_mic = 1;
+	}
+
+	return found_mic ? 0 : -ENODEV;
+}
+
+static int cbe_ptcal_disable(void)
+{
+	struct ptcal_area *area, *tmp;
+	int ret = 0;
+
+	pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
+
+	list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
+		/* disable ptcal on this node */
+		if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
+			printk(KERN_ERR "%s: error disabling PTCAL "
+					"on node %d!\n", __FUNCTION__,
+					area->nid);
+			ret = -EIO;
+			continue;
+		}
+
+		/* ensure we can access the PTCAL area */
+		memset(page_address(area->pages), 0,
+				1 << (area->order + PAGE_SHIFT));
+
+		/* clean up */
+		list_del(&area->list);
+		__free_pages(area->pages, area->order);
+		kfree(area);
+	}
+
+	return ret;
+}
+
+static int cbe_ptcal_notify_reboot(struct notifier_block *nb,
+		unsigned long code, void *data)
+{
+	return cbe_ptcal_disable();
+}
+
+static struct notifier_block cbe_ptcal_reboot_notifier = {
+	.notifier_call = cbe_ptcal_notify_reboot
+};
+
+int __init cbe_ptcal_init(void)
+{
+	int ret;
+	ptcal_start_tok = rtas_token("ibm,cbe-start-ptcal");
+	ptcal_stop_tok = rtas_token("ibm,cbe-stop-ptcal");
+
+	if (ptcal_start_tok == RTAS_UNKNOWN_SERVICE
+			|| ptcal_stop_tok == RTAS_UNKNOWN_SERVICE)
+		return -ENODEV;
+
+	ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier);
+	if (ret) {
+		printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
+		return ret;
+	}
+
+	return cbe_ptcal_enable();
+}
+
+arch_initcall(cbe_ptcal_init);
+
 void __init cbe_ras_init(void)
 {
 	unsigned long hid0;
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 36989c2eee66..54b96183cb64 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -71,7 +71,7 @@ static void cell_show_cpuinfo(struct seq_file *m)
 
 	root = of_find_node_by_path("/");
 	if (root)
-		model = get_property(root, "model", NULL);
+		model = of_get_property(root, "model", NULL);
 	seq_printf(m, "machine\t\t: CHRP %s\n", model);
 	of_node_put(root);
 }
@@ -190,15 +190,6 @@ static int __init cell_probe(void)
 	return 1;
 }
 
-/*
- * Cell has no legacy IO; anything calling this function has to
- * fail or bad things will happen
- */
-static int cell_check_legacy_ioport(unsigned int baseport)
-{
-	return -ENODEV;
-}
-
 define_machine(cell) {
 	.name			= "Cell",
 	.probe			= cell_probe,
@@ -211,7 +202,6 @@ define_machine(cell) {
 	.get_rtc_time		= rtas_get_rtc_time,
 	.set_rtc_time		= rtas_set_rtc_time,
 	.calibrate_decr		= generic_calibrate_decr,
-	.check_legacy_ioport	= cell_check_legacy_ioport,
 	.progress		= cell_progress,
 	.init_IRQ       	= cell_init_irq,
 	.pci_setup_phb		= rtas_setup_phb,
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 21a9ebd4978e..fb1f15797bbb 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -254,25 +254,25 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	}
 
 	/* Now do the horrible hacks */
-	tmp = get_property(pic->of_node, "#interrupt-cells", NULL);
+	tmp = of_get_property(pic->of_node, "#interrupt-cells", NULL);
 	if (tmp == NULL)
 		return NO_IRQ;
 	intsize = *tmp;
-	imap = get_property(pic->of_node, "interrupt-map", &imaplen);
+	imap = of_get_property(pic->of_node, "interrupt-map", &imaplen);
 	if (imap == NULL || imaplen < (intsize + 1))
 		return NO_IRQ;
 	iic = of_find_node_by_phandle(imap[intsize]);
 	if (iic == NULL)
 		return NO_IRQ;
 	imap += intsize + 1;
-	tmp = get_property(iic, "#interrupt-cells", NULL);
+	tmp = of_get_property(iic, "#interrupt-cells", NULL);
 	if (tmp == NULL)
 		return NO_IRQ;
 	intsize = *tmp;
 	/* Assume unit is last entry of interrupt specifier */
 	unit = imap[intsize - 1];
 	/* Ok, we have a unit, now let's try to get the node */
-	tmp = get_property(iic, "ibm,interrupt-server-ranges", NULL);
+	tmp = of_get_property(iic, "ibm,interrupt-server-ranges", NULL);
 	if (tmp == NULL) {
 		of_node_put(iic);
 		return NO_IRQ;
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index c43999a10deb..fec51525252e 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -36,10 +36,65 @@
 #include <asm/xmon.h>
 
 const struct spu_management_ops *spu_management_ops;
+EXPORT_SYMBOL_GPL(spu_management_ops);
+
 const struct spu_priv1_ops *spu_priv1_ops;
 
+static struct list_head spu_list[MAX_NUMNODES];
+static LIST_HEAD(spu_full_list);
+static DEFINE_MUTEX(spu_mutex);
+static DEFINE_SPINLOCK(spu_list_lock);
+
 EXPORT_SYMBOL_GPL(spu_priv1_ops);
 
+void spu_invalidate_slbs(struct spu *spu)
+{
+	struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+	if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK)
+		out_be64(&priv2->slb_invalidate_all_W, 0UL);
+}
+EXPORT_SYMBOL_GPL(spu_invalidate_slbs);
+
+/* This is called by the MM core when a segment size is changed, to
+ * request a flush of all the SPEs using a given mm
+ */
+void spu_flush_all_slbs(struct mm_struct *mm)
+{
+	struct spu *spu;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spu_list_lock, flags);
+	list_for_each_entry(spu, &spu_full_list, full_list) {
+		if (spu->mm == mm)
+			spu_invalidate_slbs(spu);
+	}
+	spin_unlock_irqrestore(&spu_list_lock, flags);
+}
+
+/* The hack below stinks... try to do something better one of
+ * these days... Does it even work properly with NR_CPUS == 1 ?
+ */
+static inline void mm_needs_global_tlbie(struct mm_struct *mm)
+{
+	int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1;
+
+	/* Global TLBIE broadcast required with SPEs. */
+	__cpus_setall(&mm->cpu_vm_mask, nr);
+}
+
+void spu_associate_mm(struct spu *spu, struct mm_struct *mm)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spu_list_lock, flags);
+	spu->mm = mm;
+	spin_unlock_irqrestore(&spu_list_lock, flags);
+	if (mm)
+		mm_needs_global_tlbie(mm);
+}
+EXPORT_SYMBOL_GPL(spu_associate_mm);
+
 static int __spu_trap_invalid_dma(struct spu *spu)
 {
 	pr_debug("%s\n", __FUNCTION__);
@@ -74,6 +129,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
 	struct mm_struct *mm = spu->mm;
 	u64 esid, vsid, llp;
+	int psize;
 
 	pr_debug("%s\n", __FUNCTION__);
 
@@ -90,22 +146,25 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 	case USER_REGION_ID:
 #ifdef CONFIG_HUGETLB_PAGE
 		if (in_hugepage_area(mm->context, ea))
-			llp = mmu_psize_defs[mmu_huge_psize].sllp;
+			psize = mmu_huge_psize;
 		else
 #endif
-			llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+			psize = mm->context.user_psize;
 		vsid = (get_vsid(mm->context.id, ea) << SLB_VSID_SHIFT) |
-				SLB_VSID_USER | llp;
+				SLB_VSID_USER;
 		break;
 	case VMALLOC_REGION_ID:
-		llp = mmu_psize_defs[mmu_virtual_psize].sllp;
+		if (ea < VMALLOC_END)
+			psize = mmu_vmalloc_psize;
+		else
+			psize = mmu_io_psize;
 		vsid = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) |
-			SLB_VSID_KERNEL | llp;
+			SLB_VSID_KERNEL;
 		break;
 	case KERNEL_REGION_ID:
-		llp = mmu_psize_defs[mmu_linear_psize].sllp;
+		psize = mmu_linear_psize;
 		vsid = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) |
-			SLB_VSID_KERNEL | llp;
+			SLB_VSID_KERNEL;
 		break;
 	default:
 		/* Future: support kernel segments so that drivers
@@ -114,9 +173,10 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 		pr_debug("invalid region access at %016lx\n", ea);
 		return 1;
 	}
+	llp = mmu_psize_defs[psize].sllp;
 
 	out_be64(&priv2->slb_index_W, spu->slb_replace);
-	out_be64(&priv2->slb_vsid_RW, vsid);
+	out_be64(&priv2->slb_vsid_RW, vsid | llp);
 	out_be64(&priv2->slb_esid_RW, esid);
 
 	spu->slb_replace++;
@@ -232,7 +292,6 @@ spu_irq_class_1(int irq, void *data)
 
 	return stat ? IRQ_HANDLED : IRQ_NONE;
 }
-EXPORT_SYMBOL_GPL(spu_irq_class_1_bottom);
 
 static irqreturn_t
 spu_irq_class_2(int irq, void *data)
@@ -330,10 +389,6 @@ static void spu_free_irqs(struct spu *spu)
 		free_irq(spu->irqs[2], spu);
 }
 
-static struct list_head spu_list[MAX_NUMNODES];
-static LIST_HEAD(spu_full_list);
-static DEFINE_MUTEX(spu_mutex);
-
 static void spu_init_channels(struct spu *spu)
 {
 	static const struct {
@@ -377,10 +432,11 @@ struct spu *spu_alloc_node(int node)
 		spu = list_entry(spu_list[node].next, struct spu, list);
 		list_del_init(&spu->list);
 		pr_debug("Got SPU %d %d\n", spu->number, spu->node);
-		spu_init_channels(spu);
 	}
 	mutex_unlock(&spu_mutex);
 
+	if (spu)
+		spu_init_channels(spu);
 	return spu;
 }
 EXPORT_SYMBOL_GPL(spu_alloc_node);
@@ -407,108 +463,6 @@ void spu_free(struct spu *spu)
 }
 EXPORT_SYMBOL_GPL(spu_free);
 
-static int spu_handle_mm_fault(struct spu *spu)
-{
-	struct mm_struct *mm = spu->mm;
-	struct vm_area_struct *vma;
-	u64 ea, dsisr, is_write;
-	int ret;
-
-	ea = spu->dar;
-	dsisr = spu->dsisr;
-#if 0
-	if (!IS_VALID_EA(ea)) {
-		return -EFAULT;
-	}
-#endif /* XXX */
-	if (mm == NULL) {
-		return -EFAULT;
-	}
-	if (mm->pgd == NULL) {
-		return -EFAULT;
-	}
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, ea);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= ea)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-#if 0
-	if (expand_stack(vma, ea))
-		goto bad_area;
-#endif /* XXX */
-good_area:
-	is_write = dsisr & MFC_DSISR_ACCESS_PUT;
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-	} else {
-		if (dsisr & MFC_DSISR_ACCESS_DENIED)
-			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
-			goto bad_area;
-	}
-	ret = 0;
-	switch (handle_mm_fault(mm, vma, ea, is_write)) {
-	case VM_FAULT_MINOR:
-		current->min_flt++;
-		break;
-	case VM_FAULT_MAJOR:
-		current->maj_flt++;
-		break;
-	case VM_FAULT_SIGBUS:
-		ret = -EFAULT;
-		goto bad_area;
-	case VM_FAULT_OOM:
-		ret = -ENOMEM;
-		goto bad_area;
-	default:
-		BUG();
-	}
-	up_read(&mm->mmap_sem);
-	return ret;
-
-bad_area:
-	up_read(&mm->mmap_sem);
-	return -EFAULT;
-}
-
-int spu_irq_class_1_bottom(struct spu *spu)
-{
-	u64 ea, dsisr, access, error = 0UL;
-	int ret = 0;
-
-	ea = spu->dar;
-	dsisr = spu->dsisr;
-	if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
-		u64 flags;
-
-		access = (_PAGE_PRESENT | _PAGE_USER);
-		access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
-		local_irq_save(flags);
-		if (hash_page(ea, access, 0x300) != 0)
-			error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
-		local_irq_restore(flags);
-	}
-	if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
-		if ((ret = spu_handle_mm_fault(spu)) != 0)
-			error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
-		else
-			error &= ~CLASS1_ENABLE_STORAGE_FAULT_INTR;
-	}
-	spu->dar = 0UL;
-	spu->dsisr = 0UL;
-	if (!error) {
-		spu_restart_dma(spu);
-	} else {
-		spu->dma_callback(spu, SPE_EVENT_SPE_DATA_STORAGE);
-	}
-	return ret;
-}
-
 struct sysdev_class spu_sysdev_class = {
 	set_kset_name("spu")
 };
@@ -582,17 +536,12 @@ static int spu_create_sysdev(struct spu *spu)
 	return 0;
 }
 
-static void spu_destroy_sysdev(struct spu *spu)
-{
-	sysfs_remove_device_from_node(&spu->sysdev, spu->node);
-	sysdev_unregister(&spu->sysdev);
-}
-
 static int __init create_spu(void *data)
 {
 	struct spu *spu;
 	int ret;
 	static int number;
+	unsigned long flags;
 
 	ret = -ENOMEM;
 	spu = kzalloc(sizeof (*spu), GFP_KERNEL);
@@ -620,8 +569,10 @@ static int __init create_spu(void *data)
 		goto out_free_irqs;
 
 	mutex_lock(&spu_mutex);
+	spin_lock_irqsave(&spu_list_lock, flags);
 	list_add(&spu->list, &spu_list[spu->node]);
 	list_add(&spu->full_list, &spu_full_list);
+	spin_unlock_irqrestore(&spu_list_lock, flags);
 	mutex_unlock(&spu_mutex);
 
 	goto out;
@@ -636,58 +587,37 @@ out:
 	return ret;
 }
 
-static void destroy_spu(struct spu *spu)
-{
-	list_del_init(&spu->list);
-	list_del_init(&spu->full_list);
-
-	spu_destroy_sysdev(spu);
-	spu_free_irqs(spu);
-	spu_destroy_spu(spu);
-	kfree(spu);
-}
-
-static void cleanup_spu_base(void)
-{
-	struct spu *spu, *tmp;
-	int node;
-
-	mutex_lock(&spu_mutex);
-	for (node = 0; node < MAX_NUMNODES; node++) {
-		list_for_each_entry_safe(spu, tmp, &spu_list[node], list)
-			destroy_spu(spu);
-	}
-	mutex_unlock(&spu_mutex);
-	sysdev_class_unregister(&spu_sysdev_class);
-}
-module_exit(cleanup_spu_base);
-
 static int __init init_spu_base(void)
 {
-	int i, ret;
+	int i, ret = 0;
+
+	for (i = 0; i < MAX_NUMNODES; i++)
+		INIT_LIST_HEAD(&spu_list[i]);
 
 	if (!spu_management_ops)
-		return 0;
+		goto out;
 
 	/* create sysdev class for spus */
 	ret = sysdev_class_register(&spu_sysdev_class);
 	if (ret)
-		return ret;
-
-	for (i = 0; i < MAX_NUMNODES; i++)
-		INIT_LIST_HEAD(&spu_list[i]);
+		goto out;
 
 	ret = spu_enumerate_spus(create_spu);
 
 	if (ret) {
 		printk(KERN_WARNING "%s: Error initializing spus\n",
 			__FUNCTION__);
-		cleanup_spu_base();
-		return ret;
+		goto out_unregister_sysdev_class;
 	}
 
 	xmon_register_spus(&spu_full_list);
 
+	return 0;
+
+ out_unregister_sysdev_class:
+	sysdev_class_unregister(&spu_sysdev_class);
+ out:
+
 	return ret;
 }
 module_init(init_spu_base);
diff --git a/arch/powerpc/platforms/cell/spu_coredump.c b/arch/powerpc/platforms/cell/spu_coredump.c
index 6915b418ee73..4fd37ff1e210 100644
--- a/arch/powerpc/platforms/cell/spu_coredump.c
+++ b/arch/powerpc/platforms/cell/spu_coredump.c
@@ -26,19 +26,18 @@
 
 #include <asm/spu.h>
 
-static struct spu_coredump_calls spu_coredump_calls;
+static struct spu_coredump_calls *spu_coredump_calls;
 static DEFINE_MUTEX(spu_coredump_mutex);
 
 int arch_notes_size(void)
 {
 	long ret;
-	struct module *owner = spu_coredump_calls.owner;
 
 	ret = -ENOSYS;
 	mutex_lock(&spu_coredump_mutex);
-	if (owner && try_module_get(owner)) {
-		ret = spu_coredump_calls.arch_notes_size();
-		module_put(owner);
+	if (spu_coredump_calls && try_module_get(spu_coredump_calls->owner)) {
+		ret = spu_coredump_calls->arch_notes_size();
+		module_put(spu_coredump_calls->owner);
 	}
 	mutex_unlock(&spu_coredump_mutex);
 	return ret;
@@ -46,36 +45,35 @@ int arch_notes_size(void)
 
 void arch_write_notes(struct file *file)
 {
-	struct module *owner = spu_coredump_calls.owner;
-
 	mutex_lock(&spu_coredump_mutex);
-	if (owner && try_module_get(owner)) {
-		spu_coredump_calls.arch_write_notes(file);
-		module_put(owner);
+	if (spu_coredump_calls && try_module_get(spu_coredump_calls->owner)) {
+		spu_coredump_calls->arch_write_notes(file);
+		module_put(spu_coredump_calls->owner);
 	}
 	mutex_unlock(&spu_coredump_mutex);
 }
 
 int register_arch_coredump_calls(struct spu_coredump_calls *calls)
 {
-	if (spu_coredump_calls.owner)
-		return -EBUSY;
+	int ret = 0;
+
 
 	mutex_lock(&spu_coredump_mutex);
-	spu_coredump_calls.arch_notes_size = calls->arch_notes_size;
-	spu_coredump_calls.arch_write_notes = calls->arch_write_notes;
-	spu_coredump_calls.owner = calls->owner;
+	if (spu_coredump_calls)
+		ret = -EBUSY;
+	else
+		spu_coredump_calls = calls;
 	mutex_unlock(&spu_coredump_mutex);
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(register_arch_coredump_calls);
 
 void unregister_arch_coredump_calls(struct spu_coredump_calls *calls)
 {
-	BUG_ON(spu_coredump_calls.owner != calls->owner);
+	BUG_ON(spu_coredump_calls != calls);
 
 	mutex_lock(&spu_coredump_mutex);
-	spu_coredump_calls.owner = NULL;
+	spu_coredump_calls = NULL;
 	mutex_unlock(&spu_coredump_mutex);
 }
 EXPORT_SYMBOL_GPL(unregister_arch_coredump_calls);
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index e34599f53d28..1d4562ae463d 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -48,11 +48,11 @@ static u64 __init find_spu_unit_number(struct device_node *spe)
 {
 	const unsigned int *prop;
 	int proplen;
-	prop = get_property(spe, "unit-id", &proplen);
+	prop = of_get_property(spe, "unit-id", &proplen);
 	if (proplen == 4)
 		return (u64)*prop;
 
-	prop = get_property(spe, "reg", &proplen);
+	prop = of_get_property(spe, "reg", &proplen);
 	if (proplen == 4)
 		return (u64)*prop;
 
@@ -76,12 +76,12 @@ static int __init spu_map_interrupts_old(struct spu *spu,
 	int nid;
 
 	/* Get the interrupt source unit from the device-tree */
-	tmp = get_property(np, "isrc", NULL);
+	tmp = of_get_property(np, "isrc", NULL);
 	if (!tmp)
 		return -ENODEV;
 	isrc = tmp[0];
 
-	tmp = get_property(np->parent->parent, "node-id", NULL);
+	tmp = of_get_property(np->parent->parent, "node-id", NULL);
 	if (!tmp) {
 		printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
 		nid = spu->node;
@@ -110,7 +110,7 @@ static void __iomem * __init spu_map_prop_old(struct spu *spu,
 	} __attribute__((packed)) *prop;
 	int proplen;
 
-	prop = get_property(n, name, &proplen);
+	prop = of_get_property(n, name, &proplen);
 	if (prop == NULL || proplen != sizeof (struct address_prop))
 		return NULL;
 
@@ -124,11 +124,11 @@ static int __init spu_map_device_old(struct spu *spu)
 	int ret;
 
 	ret = -ENODEV;
-	spu->name = get_property(node, "name", NULL);
+	spu->name = of_get_property(node, "name", NULL);
 	if (!spu->name)
 		goto out;
 
-	prop = get_property(node, "local-store", NULL);
+	prop = of_get_property(node, "local-store", NULL);
 	if (!prop)
 		goto out;
 	spu->local_store_phys = *(unsigned long *)prop;
@@ -139,7 +139,7 @@ static int __init spu_map_device_old(struct spu *spu)
 	if (!spu->local_store)
 		goto out;
 
-	prop = get_property(node, "problem", NULL);
+	prop = of_get_property(node, "problem", NULL);
 	if (!prop)
 		goto out_unmap;
 	spu->problem_phys = *(unsigned long *)prop;
@@ -226,7 +226,7 @@ static int __init spu_map_device(struct spu *spu)
 	struct device_node *np = spu->devnode;
 	int ret = -ENODEV;
 
-	spu->name = get_property(np, "name", NULL);
+	spu->name = of_get_property(np, "name", NULL);
 	if (!spu->name)
 		goto out;
 
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile
index 472217d19faf..2cd89c11af5a 100644
--- a/arch/powerpc/platforms/cell/spufs/Makefile
+++ b/arch/powerpc/platforms/cell/spufs/Makefile
@@ -1,4 +1,4 @@
-obj-y += switch.o
+obj-y += switch.o fault.o
 
 obj-$(CONFIG_SPU_FS) += spufs.o
 spufs-y += inode.o file.o context.o syscalls.o coredump.o
diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c
index 1898f0d3a8b8..3322528fa6eb 100644
--- a/arch/powerpc/platforms/cell/spufs/backing_ops.c
+++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c
@@ -350,6 +350,11 @@ static int spu_backing_send_mfc_command(struct spu_context *ctx,
 	return ret;
 }
 
+static void spu_backing_restart_dma(struct spu_context *ctx)
+{
+	/* nothing to do here */
+}
+
 struct spu_context_ops spu_backing_ops = {
 	.mbox_read = spu_backing_mbox_read,
 	.mbox_stat_read = spu_backing_mbox_stat_read,
@@ -376,4 +381,5 @@ struct spu_context_ops spu_backing_ops = {
 	.read_mfc_tagstatus = spu_backing_read_mfc_tagstatus,
 	.get_mfc_free_elements = spu_backing_get_mfc_free_elements,
 	.send_mfc_command = spu_backing_send_mfc_command,
+	.restart_dma = spu_backing_restart_dma,
 };
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 04ad2e364e97..a87d9ca3dba2 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -41,9 +41,10 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang)
 		goto out_free;
 	}
 	spin_lock_init(&ctx->mmio_lock);
+	spin_lock_init(&ctx->mapping_lock);
 	kref_init(&ctx->kref);
 	mutex_init(&ctx->state_mutex);
-	init_MUTEX(&ctx->run_sema);
+	mutex_init(&ctx->run_mutex);
 	init_waitqueue_head(&ctx->ibox_wq);
 	init_waitqueue_head(&ctx->wbox_wq);
 	init_waitqueue_head(&ctx->stop_wq);
@@ -51,6 +52,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang)
 	ctx->state = SPU_STATE_SAVED;
 	ctx->ops = &spu_backing_ops;
 	ctx->owner = get_task_mm(current);
+	INIT_LIST_HEAD(&ctx->rq);
 	if (gang)
 		spu_gang_add_ctx(gang, ctx);
 	ctx->rt_priority = current->rt_priority;
@@ -75,6 +77,7 @@ void destroy_spu_context(struct kref *kref)
 	spu_fini_csa(&ctx->csa);
 	if (ctx->gang)
 		spu_gang_remove_ctx(ctx->gang, ctx);
+	BUG_ON(!list_empty(&ctx->rq));
 	kfree(ctx);
 }
 
@@ -119,46 +122,6 @@ void spu_unmap_mappings(struct spu_context *ctx)
 }
 
 /**
- * spu_acquire_exclusive - lock spu contex and protect against userspace access
- * @ctx:	spu contex to lock
- *
- * Note:
- *	Returns 0 and with the context locked on success
- *	Returns negative error and with the context _unlocked_ on failure.
- */
-int spu_acquire_exclusive(struct spu_context *ctx)
-{
-	int ret = -EINVAL;
-
-	spu_acquire(ctx);
-	/*
-	 * Context is about to be freed, so we can't acquire it anymore.
-	 */
-	if (!ctx->owner)
-		goto out_unlock;
-
-	if (ctx->state == SPU_STATE_SAVED) {
-		ret = spu_activate(ctx, 0);
-		if (ret)
-			goto out_unlock;
-	} else {
-		/*
-		 * We need to exclude userspace access to the context.
-		 *
-		 * To protect against memory access we invalidate all ptes
-		 * and make sure the pagefault handlers block on the mutex.
-		 */
-		spu_unmap_mappings(ctx);
-	}
-
-	return 0;
-
- out_unlock:
-	spu_release(ctx);
-	return ret;
-}
-
-/**
  * spu_acquire_runnable - lock spu contex and make sure it is in runnable state
  * @ctx:	spu contex to lock
  *
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index 725e19561159..5d9ad5a0307b 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -169,12 +169,12 @@ static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i,
 	struct spu_context *ctx;
 	loff_t pos = 0;
 	int sz, dfd, rc, total = 0;
-	const int bufsz = 4096;
+	const int bufsz = PAGE_SIZE;
 	char *name;
 	char fullname[80], *buf;
 	struct elf_note en;
 
-	buf = kmalloc(bufsz, GFP_KERNEL);
+	buf = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!buf)
 		return;
 
@@ -187,9 +187,8 @@ static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i,
 		sz = spufs_coredump_read[i].size;
 
 	ctx = ctx_info->ctx;
-	if (!ctx) {
-		return;
-	}
+	if (!ctx)
+		goto out;
 
 	sprintf(fullname, "SPU/%d/%s", dfd, name);
 	en.n_namesz = strlen(fullname) + 1;
@@ -197,23 +196,25 @@ static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i,
 	en.n_type = NT_SPU;
 
 	if (!spufs_dump_write(file, &en, sizeof(en)))
-		return;
+		goto out;
 	if (!spufs_dump_write(file, fullname, en.n_namesz))
-		return;
+		goto out;
 	if (!spufs_dump_seek(file, roundup((unsigned long)file->f_pos, 4)))
-		return;
+		goto out;
 
 	do {
 		rc = do_coredump_read(i, ctx, buf, bufsz, &pos);
 		if (rc > 0) {
 			if (!spufs_dump_write(file, buf, rc))
-				return;
+				goto out;
 			total += rc;
 		}
 	} while (rc == bufsz && total < sz);
 
 	spufs_dump_seek(file, roundup((unsigned long)file->f_pos
 						- total + sz, 4));
+out:
+	free_page((unsigned long)buf);
 }
 
 static void spufs_arch_write_notes(struct file *file)
diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
new file mode 100644
index 000000000000..0f75c07e29d8
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/fault.c
@@ -0,0 +1,211 @@
+/*
+ * Low-level SPU handling
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+
+#include <asm/spu.h>
+#include <asm/spu_csa.h>
+
+#include "spufs.h"
+
+/*
+ * This ought to be kept in sync with the powerpc specific do_page_fault
+ * function. Currently, there are a few corner cases that we haven't had
+ * to handle fortunately.
+ */
+static int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, unsigned long dsisr)
+{
+	struct vm_area_struct *vma;
+	unsigned long is_write;
+	int ret;
+
+#if 0
+	if (!IS_VALID_EA(ea)) {
+		return -EFAULT;
+	}
+#endif /* XXX */
+	if (mm == NULL) {
+		return -EFAULT;
+	}
+	if (mm->pgd == NULL) {
+		return -EFAULT;
+	}
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, ea);
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= ea)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+	if (expand_stack(vma, ea))
+		goto bad_area;
+good_area:
+	is_write = dsisr & MFC_DSISR_ACCESS_PUT;
+	if (is_write) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	} else {
+		if (dsisr & MFC_DSISR_ACCESS_DENIED)
+			goto bad_area;
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+	ret = 0;
+	switch (handle_mm_fault(mm, vma, ea, is_write)) {
+	case VM_FAULT_MINOR:
+		current->min_flt++;
+		break;
+	case VM_FAULT_MAJOR:
+		current->maj_flt++;
+		break;
+	case VM_FAULT_SIGBUS:
+		ret = -EFAULT;
+		goto bad_area;
+	case VM_FAULT_OOM:
+		ret = -ENOMEM;
+		goto bad_area;
+	default:
+		BUG();
+	}
+	up_read(&mm->mmap_sem);
+	return ret;
+
+bad_area:
+	up_read(&mm->mmap_sem);
+	return -EFAULT;
+}
+
+static void spufs_handle_dma_error(struct spu_context *ctx,
+				unsigned long ea, int type)
+{
+	if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) {
+		ctx->event_return |= type;
+		wake_up_all(&ctx->stop_wq);
+	} else {
+		siginfo_t info;
+		memset(&info, 0, sizeof(info));
+
+		switch (type) {
+		case SPE_EVENT_INVALID_DMA:
+			info.si_signo = SIGBUS;
+			info.si_code = BUS_OBJERR;
+			break;
+		case SPE_EVENT_SPE_DATA_STORAGE:
+			info.si_signo = SIGBUS;
+			info.si_addr = (void __user *)ea;
+			info.si_code = BUS_ADRERR;
+			break;
+		case SPE_EVENT_DMA_ALIGNMENT:
+			info.si_signo = SIGBUS;
+			/* DAR isn't set for an alignment fault :( */
+			info.si_code = BUS_ADRALN;
+			break;
+		case SPE_EVENT_SPE_ERROR:
+			info.si_signo = SIGILL;
+			info.si_addr = (void __user *)(unsigned long)
+				ctx->ops->npc_read(ctx) - 4;
+			info.si_code = ILL_ILLOPC;
+			break;
+		}
+		if (info.si_signo)
+			force_sig_info(info.si_signo, &info, current);
+	}
+}
+
+void spufs_dma_callback(struct spu *spu, int type)
+{
+	spufs_handle_dma_error(spu->ctx, spu->dar, type);
+}
+EXPORT_SYMBOL_GPL(spufs_dma_callback);
+
+/*
+ * bottom half handler for page faults, we can't do this from
+ * interrupt context, since we might need to sleep.
+ * we also need to give up the mutex so we can get scheduled
+ * out while waiting for the backing store.
+ *
+ * TODO: try calling hash_page from the interrupt handler first
+ *       in order to speed up the easy case.
+ */
+int spufs_handle_class1(struct spu_context *ctx)
+{
+	u64 ea, dsisr, access;
+	unsigned long flags;
+	int ret;
+
+	/*
+	 * dar and dsisr get passed from the registers
+	 * to the spu_context, to this function, but not
+	 * back to the spu if it gets scheduled again.
+	 *
+	 * if we don't handle the fault for a saved context
+	 * in time, we can still expect to get the same fault
+	 * the immediately after the context restore.
+	 */
+	if (ctx->state == SPU_STATE_RUNNABLE) {
+		ea = ctx->spu->dar;
+		dsisr = ctx->spu->dsisr;
+		ctx->spu->dar= ctx->spu->dsisr = 0;
+	} else {
+		ea = ctx->csa.priv1.mfc_dar_RW;
+		dsisr = ctx->csa.priv1.mfc_dsisr_RW;
+		ctx->csa.priv1.mfc_dar_RW = 0;
+		ctx->csa.priv1.mfc_dsisr_RW = 0;
+	}
+
+	if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)))
+		return 0;
+
+	pr_debug("ctx %p: ea %016lx, dsisr %016lx state %d\n", ctx, ea,
+		dsisr, ctx->state);
+
+	/* we must not hold the lock when entering spu_handle_mm_fault */
+	spu_release(ctx);
+
+	access = (_PAGE_PRESENT | _PAGE_USER);
+	access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
+	local_irq_save(flags);
+	ret = hash_page(ea, access, 0x300);
+	local_irq_restore(flags);
+
+	/* hashing failed, so try the actual fault handler */
+	if (ret)
+		ret = spu_handle_mm_fault(current->mm, ea, dsisr);
+
+	spu_acquire(ctx);
+	/*
+	 * If we handled the fault successfully and are in runnable
+	 * state, restart the DMA.
+	 * In case of unhandled error report the problem to user space.
+	 */
+	if (!ret) {
+		if (ctx->spu)
+			ctx->ops->restart_dma(ctx);
+	} else
+		spufs_handle_dma_error(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(spufs_handle_class1);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index b00653d69c01..d010b2464a98 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -44,9 +44,25 @@ spufs_mem_open(struct inode *inode, struct file *file)
 {
 	struct spufs_inode_info *i = SPUFS_I(inode);
 	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
 	file->private_data = ctx;
-	ctx->local_store = inode->i_mapping;
-	smp_wmb();
+	if (!i->i_openers++)
+		ctx->local_store = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
+static int
+spufs_mem_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->local_store = NULL;
+	spin_unlock(&ctx->mapping_lock);
 	return 0;
 }
 
@@ -63,8 +79,8 @@ static ssize_t
 spufs_mem_read(struct file *file, char __user *buffer,
 				size_t size, loff_t *pos)
 {
-	int ret;
 	struct spu_context *ctx = file->private_data;
+	ssize_t ret;
 
 	spu_acquire(ctx);
 	ret = __spufs_mem_read(ctx, buffer, size, pos);
@@ -74,25 +90,29 @@ spufs_mem_read(struct file *file, char __user *buffer,
 
 static ssize_t
 spufs_mem_write(struct file *file, const char __user *buffer,
-					size_t size, loff_t *pos)
+					size_t size, loff_t *ppos)
 {
 	struct spu_context *ctx = file->private_data;
 	char *local_store;
+	loff_t pos = *ppos;
 	int ret;
 
-	size = min_t(ssize_t, LS_SIZE - *pos, size);
-	if (size <= 0)
+	if (pos < 0)
+		return -EINVAL;
+	if (pos > LS_SIZE)
 		return -EFBIG;
-	*pos += size;
+	if (size > LS_SIZE - pos)
+		size = LS_SIZE - pos;
 
 	spu_acquire(ctx);
-
 	local_store = ctx->ops->get_ls(ctx);
-	ret = copy_from_user(local_store + *pos - size,
-			     buffer, size) ? -EFAULT : size;
-
+	ret = copy_from_user(local_store + pos, buffer, size);
 	spu_release(ctx);
-	return ret;
+
+	if (ret)
+		return -EFAULT;
+	*ppos = pos + size;
+	return size;
 }
 
 static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
@@ -145,6 +165,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
 
 static const struct file_operations spufs_mem_fops = {
 	.open	 = spufs_mem_open,
+	.release = spufs_mem_release,
 	.read    = spufs_mem_read,
 	.write   = spufs_mem_write,
 	.llseek  = generic_file_llseek,
@@ -234,16 +255,33 @@ static int spufs_cntl_open(struct inode *inode, struct file *file)
 	struct spufs_inode_info *i = SPUFS_I(inode);
 	struct spu_context *ctx = i->i_ctx;
 
+	spin_lock(&ctx->mapping_lock);
 	file->private_data = ctx;
-	ctx->cntl = inode->i_mapping;
-	smp_wmb();
+	if (!i->i_openers++)
+		ctx->cntl = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
 	return simple_attr_open(inode, file, spufs_cntl_get,
 					spufs_cntl_set, "0x%08lx");
 }
 
+static int
+spufs_cntl_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	simple_attr_close(inode, file);
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->cntl = NULL;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
 static const struct file_operations spufs_cntl_fops = {
 	.open = spufs_cntl_open,
-	.release = simple_attr_close,
+	.release = spufs_cntl_release,
 	.read = simple_attr_read,
 	.write = simple_attr_write,
 	.mmap = spufs_cntl_mmap,
@@ -719,12 +757,28 @@ static int spufs_signal1_open(struct inode *inode, struct file *file)
 {
 	struct spufs_inode_info *i = SPUFS_I(inode);
 	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
 	file->private_data = ctx;
-	ctx->signal1 = inode->i_mapping;
-	smp_wmb();
+	if (!i->i_openers++)
+		ctx->signal1 = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
 	return nonseekable_open(inode, file);
 }
 
+static int
+spufs_signal1_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->signal1 = NULL;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
 static ssize_t __spufs_signal1_read(struct spu_context *ctx, char __user *buf,
 			size_t len, loff_t *pos)
 {
@@ -817,6 +871,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
 
 static const struct file_operations spufs_signal1_fops = {
 	.open = spufs_signal1_open,
+	.release = spufs_signal1_release,
 	.read = spufs_signal1_read,
 	.write = spufs_signal1_write,
 	.mmap = spufs_signal1_mmap,
@@ -826,12 +881,28 @@ static int spufs_signal2_open(struct inode *inode, struct file *file)
 {
 	struct spufs_inode_info *i = SPUFS_I(inode);
 	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
 	file->private_data = ctx;
-	ctx->signal2 = inode->i_mapping;
-	smp_wmb();
+	if (!i->i_openers++)
+		ctx->signal2 = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
 	return nonseekable_open(inode, file);
 }
 
+static int
+spufs_signal2_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->signal2 = NULL;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
 static ssize_t __spufs_signal2_read(struct spu_context *ctx, char __user *buf,
 			size_t len, loff_t *pos)
 {
@@ -928,6 +999,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
 
 static const struct file_operations spufs_signal2_fops = {
 	.open = spufs_signal2_open,
+	.release = spufs_signal2_release,
 	.read = spufs_signal2_read,
 	.write = spufs_signal2_write,
 	.mmap = spufs_signal2_mmap,
@@ -1027,13 +1099,30 @@ static int spufs_mss_open(struct inode *inode, struct file *file)
 	struct spu_context *ctx = i->i_ctx;
 
 	file->private_data = i->i_ctx;
-	ctx->mss = inode->i_mapping;
-	smp_wmb();
+
+	spin_lock(&ctx->mapping_lock);
+	if (!i->i_openers++)
+		ctx->mss = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
 	return nonseekable_open(inode, file);
 }
 
+static int
+spufs_mss_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->mss = NULL;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
 static const struct file_operations spufs_mss_fops = {
 	.open	 = spufs_mss_open,
+	.release = spufs_mss_release,
 	.mmap	 = spufs_mss_mmap,
 };
 
@@ -1068,14 +1157,30 @@ static int spufs_psmap_open(struct inode *inode, struct file *file)
 	struct spufs_inode_info *i = SPUFS_I(inode);
 	struct spu_context *ctx = i->i_ctx;
 
+	spin_lock(&ctx->mapping_lock);
 	file->private_data = i->i_ctx;
-	ctx->psmap = inode->i_mapping;
-	smp_wmb();
+	if (!i->i_openers++)
+		ctx->psmap = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
 	return nonseekable_open(inode, file);
 }
 
+static int
+spufs_psmap_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->psmap = NULL;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
 static const struct file_operations spufs_psmap_fops = {
 	.open	 = spufs_psmap_open,
+	.release = spufs_psmap_release,
 	.mmap	 = spufs_psmap_mmap,
 };
 
@@ -1122,12 +1227,27 @@ static int spufs_mfc_open(struct inode *inode, struct file *file)
 	if (atomic_read(&inode->i_count) != 1)
 		return -EBUSY;
 
+	spin_lock(&ctx->mapping_lock);
 	file->private_data = ctx;
-	ctx->mfc = inode->i_mapping;
-	smp_wmb();
+	if (!i->i_openers++)
+		ctx->mfc = inode->i_mapping;
+	spin_unlock(&ctx->mapping_lock);
 	return nonseekable_open(inode, file);
 }
 
+static int
+spufs_mfc_release(struct inode *inode, struct file *file)
+{
+	struct spufs_inode_info *i = SPUFS_I(inode);
+	struct spu_context *ctx = i->i_ctx;
+
+	spin_lock(&ctx->mapping_lock);
+	if (!--i->i_openers)
+		ctx->mfc = NULL;
+	spin_unlock(&ctx->mapping_lock);
+	return 0;
+}
+
 /* interrupt-level mfc callback function. */
 void spufs_mfc_callback(struct spu *spu)
 {
@@ -1309,7 +1429,10 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer,
 	if (ret)
 		goto out;
 
-	spu_acquire_runnable(ctx, 0);
+	ret = spu_acquire_runnable(ctx, 0);
+	if (ret)
+		goto out;
+
 	if (file->f_flags & O_NONBLOCK) {
 		ret = ctx->ops->send_mfc_command(ctx, &cmd);
 	} else {
@@ -1395,6 +1518,7 @@ static int spufs_mfc_fasync(int fd, struct file *file, int on)
 
 static const struct file_operations spufs_mfc_fops = {
 	.open	 = spufs_mfc_open,
+	.release = spufs_mfc_release,
 	.read	 = spufs_mfc_read,
 	.write	 = spufs_mfc_write,
 	.poll	 = spufs_mfc_poll,
diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c
index ae42e03b8c86..428875c5e4ec 100644
--- a/arch/powerpc/platforms/cell/spufs/hw_ops.c
+++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c
@@ -296,6 +296,14 @@ static int spu_hw_send_mfc_command(struct spu_context *ctx,
 	}
 }
 
+static void spu_hw_restart_dma(struct spu_context *ctx)
+{
+	struct spu_priv2 __iomem *priv2 = ctx->spu->priv2;
+
+	if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &ctx->spu->flags))
+		out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
+}
+
 struct spu_context_ops spu_hw_ops = {
 	.mbox_read = spu_hw_mbox_read,
 	.mbox_stat_read = spu_hw_mbox_stat_read,
@@ -320,4 +328,5 @@ struct spu_context_ops spu_hw_ops = {
 	.read_mfc_tagstatus = spu_hw_read_mfc_tagstatus,
 	.get_mfc_free_elements = spu_hw_get_mfc_free_elements,
 	.send_mfc_command = spu_hw_send_mfc_command,
+	.restart_dma = spu_hw_restart_dma,
 };
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 8079983ef94f..13e4f70ec8c0 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -36,6 +36,7 @@
 #include <asm/prom.h>
 #include <asm/semaphore.h>
 #include <asm/spu.h>
+#include <asm/spu_priv1.h>
 #include <asm/uaccess.h>
 
 #include "spufs.h"
@@ -54,6 +55,7 @@ spufs_alloc_inode(struct super_block *sb)
 
 	ei->i_gang = NULL;
 	ei->i_ctx = NULL;
+	ei->i_openers = 0;
 
 	return &ei->vfs_inode;
 }
@@ -520,13 +522,14 @@ out:
 
 /* File system initialization */
 enum {
-	Opt_uid, Opt_gid, Opt_err,
+	Opt_uid, Opt_gid, Opt_mode, Opt_err,
 };
 
 static match_table_t spufs_tokens = {
-	{ Opt_uid, "uid=%d" },
-	{ Opt_gid, "gid=%d" },
-	{ Opt_err, NULL  },
+	{ Opt_uid,  "uid=%d" },
+	{ Opt_gid,  "gid=%d" },
+	{ Opt_mode, "mode=%o" },
+	{ Opt_err,   NULL  },
 };
 
 static int
@@ -553,6 +556,11 @@ spufs_parse_options(char *options, struct inode *root)
 				return 0;
 			root->i_gid = option;
 			break;
+		case Opt_mode:
+			if (match_octal(&args[0], &option))
+				return 0;
+			root->i_mode = option | S_IFDIR;
+			break;
 		default:
 			return 0;
 		}
@@ -560,6 +568,11 @@ spufs_parse_options(char *options, struct inode *root)
 	return 1;
 }
 
+static void spufs_exit_isolated_loader(void)
+{
+	kfree(isolated_loader);
+}
+
 static void
 spufs_init_isolated_loader(void)
 {
@@ -571,7 +584,7 @@ spufs_init_isolated_loader(void)
 	if (!dn)
 		return;
 
-	loader = get_property(dn, "loader", &size);
+	loader = of_get_property(dn, "loader", &size);
 	if (!loader)
 		return;
 
@@ -653,6 +666,10 @@ static int __init spufs_init(void)
 {
 	int ret;
 
+	ret = -ENODEV;
+	if (!spu_management_ops)
+		goto out;
+
 	ret = -ENOMEM;
 	spufs_inode_cache = kmem_cache_create("spufs_inode_cache",
 			sizeof(struct spufs_inode_info), 0,
@@ -660,25 +677,29 @@ static int __init spufs_init(void)
 
 	if (!spufs_inode_cache)
 		goto out;
-	if (spu_sched_init() != 0) {
-		kmem_cache_destroy(spufs_inode_cache);
-		goto out;
-	}
-	ret = register_filesystem(&spufs_type);
+	ret = spu_sched_init();
 	if (ret)
 		goto out_cache;
+	ret = register_filesystem(&spufs_type);
+	if (ret)
+		goto out_sched;
 	ret = register_spu_syscalls(&spufs_calls);
 	if (ret)
 		goto out_fs;
 	ret = register_arch_coredump_calls(&spufs_coredump_calls);
 	if (ret)
-		goto out_fs;
+		goto out_syscalls;
 
 	spufs_init_isolated_loader();
 
 	return 0;
+
+out_syscalls:
+	unregister_spu_syscalls(&spufs_calls);
 out_fs:
 	unregister_filesystem(&spufs_type);
+out_sched:
+	spu_sched_exit();
 out_cache:
 	kmem_cache_destroy(spufs_inode_cache);
 out:
@@ -689,6 +710,7 @@ module_init(spufs_init);
 static void __exit spufs_exit(void)
 {
 	spu_sched_exit();
+	spufs_exit_isolated_loader();
 	unregister_arch_coredump_calls(&spufs_coredump_calls);
 	unregister_spu_syscalls(&spufs_calls);
 	unregister_filesystem(&spufs_type);
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 353a8fa07ab8..57626600b1a4 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -18,27 +18,6 @@ void spufs_stop_callback(struct spu *spu)
 	wake_up_all(&ctx->stop_wq);
 }
 
-void spufs_dma_callback(struct spu *spu, int type)
-{
-	struct spu_context *ctx = spu->ctx;
-
-	if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) {
-		ctx->event_return |= type;
-		wake_up_all(&ctx->stop_wq);
-	} else {
-		switch (type) {
-		case SPE_EVENT_DMA_ALIGNMENT:
-		case SPE_EVENT_SPE_DATA_STORAGE:
-		case SPE_EVENT_INVALID_DMA:
-			force_sig(SIGBUS, /* info, */ current);
-			break;
-		case SPE_EVENT_SPE_ERROR:
-			force_sig(SIGILL, /* info */ current);
-			break;
-		}
-	}
-}
-
 static inline int spu_stopped(struct spu_context *ctx, u32 * stat)
 {
 	struct spu *spu;
@@ -63,13 +42,18 @@ static int spu_setup_isolated(struct spu_context *ctx)
 	const u32 status_loading = SPU_STATUS_RUNNING
 		| SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS;
 
+	ret = -ENODEV;
 	if (!isolated_loader)
-		return -ENODEV;
-
-	ret = spu_acquire_exclusive(ctx);
-	if (ret)
 		goto out;
 
+	/*
+	 * We need to exclude userspace access to the context.
+	 *
+	 * To protect against memory access we invalidate all ptes
+	 * and make sure the pagefault handlers block on the mutex.
+	 */
+	spu_unmap_mappings(ctx);
+
 	mfc_cntl = &ctx->spu->priv2->mfc_control_RW;
 
 	/* purge the MFC DMA queue to ensure no spurious accesses before we
@@ -82,7 +66,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
 			printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
 					__FUNCTION__);
 			ret = -EIO;
-			goto out_unlock;
+			goto out;
 		}
 		cond_resched();
 	}
@@ -119,12 +103,15 @@ static int spu_setup_isolated(struct spu_context *ctx)
 		pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
 		ret = -EACCES;
+		goto out_drop_priv;
+	}
 
-	} else if (!(status & SPU_STATUS_ISOLATED_STATE)) {
+	if (!(status & SPU_STATUS_ISOLATED_STATE)) {
 		/* This isn't allowed by the CBEA, but check anyway */
 		pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
 		ret = -EINVAL;
+		goto out_drop_priv;
 	}
 
 out_drop_priv:
@@ -132,30 +119,19 @@ out_drop_priv:
 	sr1 |= MFC_STATE1_PROBLEM_STATE_MASK;
 	spu_mfc_sr1_set(ctx->spu, sr1);
 
-out_unlock:
-	spu_release(ctx);
 out:
 	return ret;
 }
 
-static inline int spu_run_init(struct spu_context *ctx, u32 * npc)
+static int spu_run_init(struct spu_context *ctx, u32 * npc)
 {
-	int ret;
-	unsigned long runcntl = SPU_RUNCNTL_RUNNABLE;
-
-	ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE);
-	if (ret)
-		return ret;
-
 	if (ctx->flags & SPU_CREATE_ISOLATE) {
+		unsigned long runcntl;
+
 		if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) {
-			/* Need to release ctx, because spu_setup_isolated will
-			 * acquire it exclusively.
-			 */
-			spu_release(ctx);
-			ret = spu_setup_isolated(ctx);
-			if (!ret)
-				ret = spu_acquire_runnable(ctx, SPU_ACTIVATE_NOWAKE);
+			int ret = spu_setup_isolated(ctx);
+			if (ret)
+				return ret;
 		}
 
 		/* if userspace has set the runcntrl register (eg, to issue an
@@ -164,16 +140,17 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc)
 			(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
 		if (runcntl == 0)
 			runcntl = SPU_RUNCNTL_RUNNABLE;
+		ctx->ops->runcntl_write(ctx, runcntl);
 	} else {
 		spu_start_tick(ctx);
 		ctx->ops->npc_write(ctx, *npc);
+		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
 	}
 
-	ctx->ops->runcntl_write(ctx, runcntl);
-	return ret;
+	return 0;
 }
 
-static inline int spu_run_fini(struct spu_context *ctx, u32 * npc,
+static int spu_run_fini(struct spu_context *ctx, u32 * npc,
 			       u32 * status)
 {
 	int ret = 0;
@@ -189,19 +166,27 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc,
 	return ret;
 }
 
-static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc,
+static int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc,
 				         u32 *status)
 {
 	int ret;
 
-	if ((ret = spu_run_fini(ctx, npc, status)) != 0)
+	ret = spu_run_fini(ctx, npc, status);
+	if (ret)
 		return ret;
-	if (*status & (SPU_STATUS_STOPPED_BY_STOP |
-		       SPU_STATUS_STOPPED_BY_HALT)) {
+
+	if (*status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT))
 		return *status;
-	}
-	if ((ret = spu_run_init(ctx, npc)) != 0)
+
+	ret = spu_acquire_runnable(ctx, 0);
+	if (ret)
+		return ret;
+
+	ret = spu_run_init(ctx, npc);
+	if (ret) {
+		spu_release(ctx);
 		return ret;
+	}
 	return 0;
 }
 
@@ -253,17 +238,17 @@ int spu_process_callback(struct spu_context *ctx)
 {
 	struct spu_syscall_block s;
 	u32 ls_pointer, npc;
-	char *ls;
+	void __iomem *ls;
 	long spu_ret;
 	int ret;
 
 	/* get syscall block from local store */
-	npc = ctx->ops->npc_read(ctx);
-	ls = ctx->ops->get_ls(ctx);
-	ls_pointer = *(u32*)(ls + npc);
+	npc = ctx->ops->npc_read(ctx) & ~3;
+	ls = (void __iomem *)ctx->ops->get_ls(ctx);
+	ls_pointer = in_be32(ls + npc);
 	if (ls_pointer > (LS_SIZE - sizeof(s)))
 		return -EFAULT;
-	memcpy(&s, ls + ls_pointer, sizeof (s));
+	memcpy_fromio(&s, ls + ls_pointer, sizeof(s));
 
 	/* do actual syscall without pinning the spu */
 	ret = 0;
@@ -283,7 +268,7 @@ int spu_process_callback(struct spu_context *ctx)
 	}
 
 	/* write result, jump over indirect pointer */
-	memcpy(ls + ls_pointer, &spu_ret, sizeof (spu_ret));
+	memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret));
 	ctx->ops->npc_write(ctx, npc);
 	ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
 	return ret;
@@ -292,11 +277,8 @@ int spu_process_callback(struct spu_context *ctx)
 static inline int spu_process_events(struct spu_context *ctx)
 {
 	struct spu *spu = ctx->spu;
-	u64 pte_fault = MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED;
 	int ret = 0;
 
-	if (spu->dsisr & pte_fault)
-		ret = spu_irq_class_1_bottom(spu);
 	if (spu->class_0_pending)
 		ret = spu_irq_class_0_bottom(spu);
 	if (!ret && signal_pending(current))
@@ -310,14 +292,21 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx,
 	int ret;
 	u32 status;
 
-	if (down_interruptible(&ctx->run_sema))
+	if (mutex_lock_interruptible(&ctx->run_mutex))
 		return -ERESTARTSYS;
 
 	ctx->ops->master_start(ctx);
 	ctx->event_return = 0;
-	ret = spu_run_init(ctx, npc);
+
+	ret = spu_acquire_runnable(ctx, 0);
 	if (ret)
+		return ret;
+
+	ret = spu_run_init(ctx, npc);
+	if (ret) {
+		spu_release(ctx);
 		goto out;
+	}
 
 	do {
 		ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, &status));
@@ -330,6 +319,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx,
 				break;
 			status &= ~SPU_STATUS_STOPPED_BY_STOP;
 		}
+		ret = spufs_handle_class1(ctx);
+		if (ret)
+			break;
+
 		if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
 			ret = spu_reacquire_runnable(ctx, npc, &status);
 			if (ret) {
@@ -363,6 +356,6 @@ out2:
 
 out:
 	*event = ctx->event_return;
-	up(&ctx->run_sema);
+	mutex_unlock(&ctx->run_mutex);
 	return ret;
 }
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 2f25e68b4bac..91030b8abdca 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -71,14 +71,27 @@ static inline int node_allowed(int node)
 
 void spu_start_tick(struct spu_context *ctx)
 {
-	if (ctx->policy == SCHED_RR)
+	if (ctx->policy == SCHED_RR) {
+		/*
+		 * Make sure the exiting bit is cleared.
+		 */
+		clear_bit(SPU_SCHED_EXITING, &ctx->sched_flags);
+		mb();
 		queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE);
+	}
 }
 
 void spu_stop_tick(struct spu_context *ctx)
 {
-	if (ctx->policy == SCHED_RR)
+	if (ctx->policy == SCHED_RR) {
+		/*
+		 * While the work can be rearming normally setting this flag
+		 * makes sure it does not rearm itself anymore.
+		 */
+		set_bit(SPU_SCHED_EXITING, &ctx->sched_flags);
+		mb();
 		cancel_delayed_work(&ctx->sched_work);
+	}
 }
 
 void spu_sched_tick(struct work_struct *work)
@@ -86,7 +99,15 @@ void spu_sched_tick(struct work_struct *work)
 	struct spu_context *ctx =
 		container_of(work, struct spu_context, sched_work.work);
 	struct spu *spu;
-	int rearm = 1;
+	int preempted = 0;
+
+	/*
+	 * If this context is being stopped avoid rescheduling from the
+	 * scheduler tick because we would block on the state_mutex.
+	 * The caller will yield the spu later on anyway.
+	 */
+	if (test_bit(SPU_SCHED_EXITING, &ctx->sched_flags))
+		return;
 
 	mutex_lock(&ctx->state_mutex);
 	spu = ctx->spu;
@@ -94,12 +115,19 @@ void spu_sched_tick(struct work_struct *work)
 		int best = sched_find_first_bit(spu_prio->bitmap);
 		if (best <= ctx->prio) {
 			spu_deactivate(ctx);
-			rearm = 0;
+			preempted = 1;
 		}
 	}
 	mutex_unlock(&ctx->state_mutex);
 
-	if (rearm)
+	if (preempted) {
+		/*
+		 * We need to break out of the wait loop in spu_run manually
+		 * to ensure this context gets put on the runqueue again
+		 * ASAP.
+		 */
+		wake_up(&ctx->stop_wq);
+	} else
 		spu_start_tick(ctx);
 }
 
@@ -127,14 +155,6 @@ static void spu_remove_from_active_list(struct spu *spu)
 	mutex_unlock(&spu_prio->active_mutex[node]);
 }
 
-static inline void mm_needs_global_tlbie(struct mm_struct *mm)
-{
-	int nr = (NR_CPUS > 1) ? NR_CPUS : NR_CPUS + 1;
-
-	/* Global TLBIE broadcast required with SPEs. */
-	__cpus_setall(&mm->cpu_vm_mask, nr);
-}
-
 static BLOCKING_NOTIFIER_HEAD(spu_switch_notifier);
 
 static void spu_switch_notify(struct spu *spu, struct spu_context *ctx)
@@ -167,8 +187,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	ctx->spu = spu;
 	ctx->ops = &spu_hw_ops;
 	spu->pid = current->pid;
-	spu->mm = ctx->owner;
-	mm_needs_global_tlbie(spu->mm);
+	spu_associate_mm(spu, ctx->owner);
 	spu->ibox_callback = spufs_ibox_callback;
 	spu->wbox_callback = spufs_wbox_callback;
 	spu->stop_callback = spufs_stop_callback;
@@ -205,7 +224,7 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
 	spu->stop_callback = NULL;
 	spu->mfc_callback = NULL;
 	spu->dma_callback = NULL;
-	spu->mm = NULL;
+	spu_associate_mm(spu, NULL);
 	spu->pid = 0;
 	ctx->ops = &spu_backing_ops;
 	ctx->spu = NULL;
@@ -217,62 +236,42 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
  * spu_add_to_rq - add a context to the runqueue
  * @ctx:       context to add
  */
-static void spu_add_to_rq(struct spu_context *ctx)
+static void __spu_add_to_rq(struct spu_context *ctx)
 {
-	spin_lock(&spu_prio->runq_lock);
-	list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]);
-	set_bit(ctx->prio, spu_prio->bitmap);
-	spin_unlock(&spu_prio->runq_lock);
-}
+	int prio = ctx->prio;
 
-/**
- * spu_del_from_rq - remove a context from the runqueue
- * @ctx:       context to remove
- */
-static void spu_del_from_rq(struct spu_context *ctx)
-{
-	spin_lock(&spu_prio->runq_lock);
-	list_del_init(&ctx->rq);
-	if (list_empty(&spu_prio->runq[ctx->prio]))
-		clear_bit(ctx->prio, spu_prio->bitmap);
-	spin_unlock(&spu_prio->runq_lock);
+	list_add_tail(&ctx->rq, &spu_prio->runq[prio]);
+	set_bit(prio, spu_prio->bitmap);
 }
 
-/**
- * spu_grab_context - remove one context from the runqueue
- * @prio:      priority of the context to be removed
- *
- * This function removes one context from the runqueue for priority @prio.
- * If there is more than one context with the given priority the first
- * task on the runqueue will be taken.
- *
- * Returns the spu_context it just removed.
- *
- * Must be called with spu_prio->runq_lock held.
- */
-static struct spu_context *spu_grab_context(int prio)
+static void __spu_del_from_rq(struct spu_context *ctx)
 {
-	struct list_head *rq = &spu_prio->runq[prio];
+	int prio = ctx->prio;
 
-	if (list_empty(rq))
-		return NULL;
-	return list_entry(rq->next, struct spu_context, rq);
+	if (!list_empty(&ctx->rq))
+		list_del_init(&ctx->rq);
+	if (list_empty(&spu_prio->runq[prio]))
+		clear_bit(prio, spu_prio->bitmap);
 }
 
 static void spu_prio_wait(struct spu_context *ctx)
 {
 	DEFINE_WAIT(wait);
 
-	set_bit(SPU_SCHED_WAKE, &ctx->sched_flags);
+	spin_lock(&spu_prio->runq_lock);
 	prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE);
 	if (!signal_pending(current)) {
+		__spu_add_to_rq(ctx);
+		spin_unlock(&spu_prio->runq_lock);
 		mutex_unlock(&ctx->state_mutex);
 		schedule();
 		mutex_lock(&ctx->state_mutex);
+		spin_lock(&spu_prio->runq_lock);
+		__spu_del_from_rq(ctx);
 	}
+	spin_unlock(&spu_prio->runq_lock);
 	__set_current_state(TASK_RUNNING);
 	remove_wait_queue(&ctx->stop_wq, &wait);
-	clear_bit(SPU_SCHED_WAKE, &ctx->sched_flags);
 }
 
 /**
@@ -291,9 +290,14 @@ static void spu_reschedule(struct spu *spu)
 	spin_lock(&spu_prio->runq_lock);
 	best = sched_find_first_bit(spu_prio->bitmap);
 	if (best < MAX_PRIO) {
-		struct spu_context *ctx = spu_grab_context(best);
-		if (ctx && test_bit(SPU_SCHED_WAKE, &ctx->sched_flags))
-			wake_up(&ctx->stop_wq);
+		struct list_head *rq = &spu_prio->runq[best];
+		struct spu_context *ctx;
+
+		BUG_ON(list_empty(rq));
+
+		ctx = list_entry(rq->next, struct spu_context, rq);
+		__spu_del_from_rq(ctx);
+		wake_up(&ctx->stop_wq);
 	}
 	spin_unlock(&spu_prio->runq_lock);
 }
@@ -376,6 +380,12 @@ static struct spu *find_victim(struct spu_context *ctx)
 			}
 			spu_unbind_context(spu, victim);
 			mutex_unlock(&victim->state_mutex);
+			/*
+			 * We need to break out of the wait loop in spu_run
+			 * manually to ensure this context gets put on the
+			 * runqueue again ASAP.
+			 */
+			wake_up(&victim->stop_wq);
 			return spu;
 		}
 	}
@@ -388,7 +398,7 @@ static struct spu *find_victim(struct spu_context *ctx)
  * @ctx:	spu context to schedule
  * @flags:	flags (currently ignored)
  *
- * Tries to find a free spu to run @ctx.  If no free spu is availble
+ * Tries to find a free spu to run @ctx.  If no free spu is available
  * add the context to the runqueue so it gets woken up once an spu
  * is available.
  */
@@ -413,10 +423,7 @@ int spu_activate(struct spu_context *ctx, unsigned long flags)
 			return 0;
 		}
 
-		spu_add_to_rq(ctx);
-		if (!(flags & SPU_ACTIVATE_NOWAKE))
-			spu_prio_wait(ctx);
-		spu_del_from_rq(ctx);
+		spu_prio_wait(ctx);
 	} while (!signal_pending(current));
 
 	return -ERESTARTSYS;
@@ -450,7 +457,6 @@ void spu_deactivate(struct spu_context *ctx)
 void spu_yield(struct spu_context *ctx)
 {
 	struct spu *spu;
-	int need_yield = 0;
 
 	if (mutex_trylock(&ctx->state_mutex)) {
 		if ((spu = ctx->spu) != NULL) {
@@ -459,13 +465,10 @@ void spu_yield(struct spu_context *ctx)
 				pr_debug("%s: yielding SPU %d NODE %d\n",
 					 __FUNCTION__, spu->number, spu->node);
 				spu_deactivate(ctx);
-				need_yield = 1;
 			}
 		}
 		mutex_unlock(&ctx->state_mutex);
 	}
-	if (unlikely(need_yield))
-		yield();
 }
 
 int __init spu_sched_init(void)
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 0c437891dfd5..0a947fd7de57 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -41,7 +41,7 @@ struct spu_gang;
 
 /* ctx->sched_flags */
 enum {
-	SPU_SCHED_WAKE = 0,
+	SPU_SCHED_EXITING = 0,
 };
 
 struct spu_context {
@@ -50,16 +50,17 @@ struct spu_context {
 	spinlock_t mmio_lock;		  /* protects mmio access */
 	struct address_space *local_store; /* local store mapping.  */
 	struct address_space *mfc;	   /* 'mfc' area mappings. */
-	struct address_space *cntl; 	   /* 'control' area mappings. */
-	struct address_space *signal1; 	   /* 'signal1' area mappings. */
-	struct address_space *signal2; 	   /* 'signal2' area mappings. */
-	struct address_space *mss; 	   /* 'mss' area mappings. */
-	struct address_space *psmap; 	   /* 'psmap' area mappings. */
+	struct address_space *cntl;	   /* 'control' area mappings. */
+	struct address_space *signal1;	   /* 'signal1' area mappings. */
+	struct address_space *signal2;	   /* 'signal2' area mappings. */
+	struct address_space *mss;	   /* 'mss' area mappings. */
+	struct address_space *psmap;	   /* 'psmap' area mappings. */
+	spinlock_t mapping_lock;
 	u64 object_id;		   /* user space pointer for oprofile */
 
 	enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state;
 	struct mutex state_mutex;
-	struct semaphore run_sema;
+	struct mutex run_mutex;
 
 	struct mm_struct *owner;
 
@@ -140,6 +141,7 @@ struct spu_context_ops {
 			       struct spu_dma_info * info);
 	void (*proxydma_info_read) (struct spu_context * ctx,
 				    struct spu_proxydma_info * info);
+	void (*restart_dma)(struct spu_context *ctx);
 };
 
 extern struct spu_context_ops spu_hw_ops;
@@ -149,6 +151,7 @@ struct spufs_inode_info {
 	struct spu_context *i_ctx;
 	struct spu_gang *i_gang;
 	struct inode vfs_inode;
+	int i_openers;
 };
 #define SPUFS_I(inode) \
 	container_of(inode, struct spufs_inode_info, vfs_inode)
@@ -170,6 +173,9 @@ int put_spu_gang(struct spu_gang *gang);
 void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx);
 void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx);
 
+/* fault handling */
+int spufs_handle_class1(struct spu_context *ctx);
+
 /* context management */
 static inline void spu_acquire(struct spu_context *ctx)
 {
@@ -190,10 +196,7 @@ void spu_unmap_mappings(struct spu_context *ctx);
 void spu_forget(struct spu_context *ctx);
 int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags);
 void spu_acquire_saved(struct spu_context *ctx);
-int spu_acquire_exclusive(struct spu_context *ctx);
-enum {
-	SPU_ACTIVATE_NOWAKE = 1,
-};
+
 int spu_activate(struct spu_context *ctx, unsigned long flags);
 void spu_deactivate(struct spu_context *ctx);
 void spu_yield(struct spu_context *ctx);
@@ -220,14 +223,13 @@ extern char *isolated_loader;
 		prepare_to_wait(&(wq), &__wait, TASK_INTERRUPTIBLE);	\
 		if (condition)						\
 			break;						\
-		if (!signal_pending(current)) {				\
-			spu_release(ctx);				\
-			schedule();					\
-			spu_acquire(ctx);				\
-			continue;					\
+		if (signal_pending(current)) {				\
+			__ret = -ERESTARTSYS;				\
+			break;						\
 		}							\
-		__ret = -ERESTARTSYS;					\
-		break;							\
+		spu_release(ctx);					\
+		schedule();						\
+		spu_acquire(ctx);					\
 	}								\
 	finish_wait(&(wq), &__wait);					\
 	__ret;								\
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index c08981ff7fc6..8347c4a3f894 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -468,26 +468,6 @@ static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
 			 MFC_CNTL_PURGE_DMA_COMPLETE);
 }
 
-static inline void save_mfc_slbs(struct spu_state *csa, struct spu *spu)
-{
-	struct spu_priv2 __iomem *priv2 = spu->priv2;
-	int i;
-
-	/* Save, Step 29:
-	 *     If MFC_SR1[R]='1', save SLBs in CSA.
-	 */
-	if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) {
-		csa->priv2.slb_index_W = in_be64(&priv2->slb_index_W);
-		for (i = 0; i < 8; i++) {
-			out_be64(&priv2->slb_index_W, i);
-			eieio();
-			csa->slb_esid_RW[i] = in_be64(&priv2->slb_esid_RW);
-			csa->slb_vsid_RW[i] = in_be64(&priv2->slb_vsid_RW);
-			eieio();
-		}
-	}
-}
-
 static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu)
 {
 	/* Save, Step 30:
@@ -708,20 +688,6 @@ static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
 	out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
 }
 
-static inline void invalidate_slbs(struct spu_state *csa, struct spu *spu)
-{
-	struct spu_priv2 __iomem *priv2 = spu->priv2;
-
-	/* Save, Step 45:
-	 * Restore, Step 19:
-	 *     If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All.
-	 */
-	if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) {
-		out_be64(&priv2->slb_invalidate_all_W, 0UL);
-		eieio();
-	}
-}
-
 static inline void get_kernel_slb(u64 ea, u64 slb[2])
 {
 	u64 llp;
@@ -765,7 +731,7 @@ static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
 	 *     MFC_SR1[R]=1 (in other words, assume that
 	 *     translation is desired by OS environment).
 	 */
-	invalidate_slbs(csa, spu);
+	spu_invalidate_slbs(spu);
 	get_kernel_slb((unsigned long)&spu_save_code[0], code_slb);
 	get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb);
 	load_mfc_slb(spu, code_slb, 0);
@@ -1718,27 +1684,6 @@ static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu)
 	}
 }
 
-static inline void restore_mfc_slbs(struct spu_state *csa, struct spu *spu)
-{
-	struct spu_priv2 __iomem *priv2 = spu->priv2;
-	int i;
-
-	/* Restore, Step 68:
-	 *     If MFC_SR1[R]='1', restore SLBs from CSA.
-	 */
-	if (csa->priv1.mfc_sr1_RW & MFC_STATE1_RELOCATE_MASK) {
-		for (i = 0; i < 8; i++) {
-			out_be64(&priv2->slb_index_W, i);
-			eieio();
-			out_be64(&priv2->slb_esid_RW, csa->slb_esid_RW[i]);
-			out_be64(&priv2->slb_vsid_RW, csa->slb_vsid_RW[i]);
-			eieio();
-		}
-		out_be64(&priv2->slb_index_W, csa->priv2.slb_index_W);
-		eieio();
-	}
-}
-
 static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
 {
 	/* Restore, Step 69:
@@ -1875,7 +1820,6 @@ static void save_csa(struct spu_state *prev, struct spu *spu)
 	set_mfc_tclass_id(prev, spu);	/* Step 26. */
 	purge_mfc_queue(prev, spu);	/* Step 27. */
 	wait_purge_complete(prev, spu);	/* Step 28. */
-	save_mfc_slbs(prev, spu);	/* Step 29. */
 	setup_mfc_sr1(prev, spu);	/* Step 30. */
 	save_spu_npc(prev, spu);	/* Step 31. */
 	save_spu_privcntl(prev, spu);	/* Step 32. */
@@ -1987,7 +1931,7 @@ static void harvest(struct spu_state *prev, struct spu *spu)
 	reset_spu_privcntl(prev, spu);	        /* Step 16. */
 	reset_spu_lslr(prev, spu);              /* Step 17. */
 	setup_mfc_sr1(prev, spu);	        /* Step 18. */
-	invalidate_slbs(prev, spu);	        /* Step 19. */
+	spu_invalidate_slbs(spu);        	/* Step 19. */
 	reset_ch_part1(prev, spu);	        /* Step 20. */
 	reset_ch_part2(prev, spu);	        /* Step 21. */
 	enable_interrupts(prev, spu);	        /* Step 22. */
@@ -2055,7 +1999,7 @@ static void restore_csa(struct spu_state *next, struct spu *spu)
 	restore_spu_mb(next, spu);	        /* Step 65. */
 	check_ppu_mb_stat(next, spu);	        /* Step 66. */
 	check_ppuint_mb_stat(next, spu);	/* Step 67. */
-	restore_mfc_slbs(next, spu);	        /* Step 68. */
+	spu_invalidate_slbs(spu);		/* Modified Step 68. */
 	restore_mfc_sr1(next, spu);	        /* Step 69. */
 	restore_other_spu_access(next, spu);	/* Step 70. */
 	restore_spu_runcntl(next, spu);	        /* Step 71. */
@@ -2140,6 +2084,10 @@ int spu_save(struct spu_state *prev, struct spu *spu)
 	int rc;
 
 	acquire_spu_lock(spu);	        /* Step 1.     */
+	prev->dar = spu->dar;
+	prev->dsisr = spu->dsisr;
+	spu->dar = 0;
+	spu->dsisr = 0;
 	rc = __do_spu_save(prev, spu);	/* Steps 2-53. */
 	release_spu_lock(spu);
 	if (rc != 0 && rc != 2 && rc != 6) {
@@ -2165,9 +2113,9 @@ int spu_restore(struct spu_state *new, struct spu *spu)
 
 	acquire_spu_lock(spu);
 	harvest(NULL, spu);
-	spu->dar = 0;
-	spu->dsisr = 0;
 	spu->slb_replace = 0;
+	new->dar = 0;
+	new->dsisr = 0;
 	spu->class_0_pending = 0;
 	rc = __do_spu_restore(new, spu);
 	release_spu_lock(spu);
diff --git a/arch/powerpc/platforms/celleb/Kconfig b/arch/powerpc/platforms/celleb/Kconfig
new file mode 100644
index 000000000000..2db1e293433e
--- /dev/null
+++ b/arch/powerpc/platforms/celleb/Kconfig
@@ -0,0 +1,9 @@
+config PPC_CELLEB
+	bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
+	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_CELL
+	select PPC_OF_PLATFORM_PCI
+	select HAS_TXX9_SERIAL
+	select PPC_UDBG_BEAT
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	select USB_EHCI_BIG_ENDIAN_MMIO
diff --git a/arch/powerpc/platforms/celleb/Makefile b/arch/powerpc/platforms/celleb/Makefile
index 3baf658ac543..f4f82520dc4f 100644
--- a/arch/powerpc/platforms/celleb/Makefile
+++ b/arch/powerpc/platforms/celleb/Makefile
@@ -1,9 +1,8 @@
 obj-y				+= interrupt.o iommu.o setup.o \
 				   htab.o beat.o pci.o \
-				   scc_epci.o hvCall.o
+				   scc_epci.o scc_uhc.o hvCall.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_PPC_UDBG_BEAT)	+= udbg_beat.o
-obj-$(CONFIG_USB)		+= scc_uhc.o
 obj-$(CONFIG_HAS_TXX9_SERIAL)	+= scc_sio.o
 obj-$(CONFIG_SPU_BASE)		+= spu_priv1.o
diff --git a/arch/powerpc/platforms/celleb/iommu.c b/arch/powerpc/platforms/celleb/iommu.c
index f63b94c65353..755d869d8553 100644
--- a/arch/powerpc/platforms/celleb/iommu.c
+++ b/arch/powerpc/platforms/celleb/iommu.c
@@ -37,7 +37,7 @@ static int __init find_dma_window(u64 *io_space_id, u64 *ioid,
 	const unsigned long *dma_window;
 
 	for_each_node_by_type(dn, "ioif") {
-		dma_window = get_property(dn, "toshiba,dma-window", NULL);
+		dma_window = of_get_property(dn, "toshiba,dma-window", NULL);
 		if (dma_window) {
 			*io_space_id = (dma_window[0] >> 32) & 0xffffffffUL;
 			*ioid = dma_window[0] & 0x7ffUL;
@@ -80,7 +80,7 @@ static int celleb_of_bus_notify(struct notifier_block *nb,
 	if (action != BUS_NOTIFY_ADD_DEVICE)
 		return 0;
 
-	dev->archdata.dma_ops = pci_dma_ops;
+	dev->archdata.dma_ops = get_pci_dma_ops();
 
 	return 0;
 }
@@ -95,7 +95,7 @@ static int __init celleb_init_iommu(void)
 		return -ENODEV;
 
 	celleb_init_direct_mapping();
-	pci_dma_ops = &dma_direct_ops;
+	set_pci_dma_ops(&dma_direct_ops);
 	bus_register_notifier(&of_platform_bus_type, &celleb_of_bus_notifier);
 
 	return 0;
diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c
index 98de836dfed3..d1adf34cd5e8 100644
--- a/arch/powerpc/platforms/celleb/pci.c
+++ b/arch/powerpc/platforms/celleb/pci.c
@@ -309,13 +309,13 @@ static int __devinit celleb_setup_fake_pci_device(struct device_node *node,
 		goto error;
 	}
 
-	name = get_property(node, "model", &rlen);
+	name = of_get_property(node, "model", &rlen);
 	if (!name) {
 		printk(KERN_ERR "PCI: model property not found.\n");
 		goto error;
 	}
 
-	wi4 = get_property(node, "reg", &rlen);
+	wi4 = of_get_property(node, "reg", &rlen);
 	if (wi4 == NULL)
 		goto error;
 
@@ -352,10 +352,10 @@ static int __devinit celleb_setup_fake_pci_device(struct device_node *node,
 	}
 	pr_debug("PCI: res assigned 0x%016lx\n", (unsigned long)*res);
 
-	wi0 = get_property(node, "device-id", NULL);
-	wi1 = get_property(node, "vendor-id", NULL);
-	wi2 = get_property(node, "class-code", NULL);
-	wi3 = get_property(node, "revision-id", NULL);
+	wi0 = of_get_property(node, "device-id", NULL);
+	wi1 = of_get_property(node, "vendor-id", NULL);
+	wi2 = of_get_property(node, "class-code", NULL);
+	wi3 = of_get_property(node, "revision-id", NULL);
 
 	celleb_config_write_fake(*config, PCI_DEVICE_ID, 2, wi0[0] & 0xffff);
 	celleb_config_write_fake(*config, PCI_VENDOR_ID, 2, wi1[0] & 0xffff);
@@ -376,7 +376,7 @@ static int __devinit celleb_setup_fake_pci_device(struct device_node *node,
 
 	celleb_setup_pci_base_addrs(hose, devno, fn, num_base_addr);
 
-	li = get_property(node, "interrupts", &rlen);
+	li = of_get_property(node, "interrupts", &rlen);
 	val = li[0];
 	celleb_config_write_fake(*config, PCI_INTERRUPT_PIN, 1, 1);
 	celleb_config_write_fake(*config, PCI_INTERRUPT_LINE, 1, val);
@@ -424,7 +424,7 @@ static int __devinit phb_set_bus_ranges(struct device_node *dev,
 	const int *bus_range;
 	unsigned int len;
 
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int))
 		return 1;
 
@@ -451,7 +451,7 @@ int __devinit celleb_setup_phb(struct pci_controller *phb)
 	struct device_node *node;
 	unsigned int rlen;
 
-	name = get_property(dev, "name", &rlen);
+	name = of_get_property(dev, "name", &rlen);
 	if (!name)
 		return 1;
 
diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c
index c11b39c3776a..fb23d53eb09c 100644
--- a/arch/powerpc/platforms/celleb/scc_epci.c
+++ b/arch/powerpc/platforms/celleb/scc_epci.c
@@ -43,11 +43,34 @@
 
 #define iob()  __asm__ __volatile__("eieio; sync":::"memory")
 
+static inline volatile void __iomem *celleb_epci_get_epci_base(
+					struct pci_controller *hose)
+{
+	/*
+	 * Note:
+	 * Celleb epci uses cfg_addr as a base address for
+	 * epci control registers.
+	 */
+
+	return hose->cfg_addr;
+}
+
+static inline volatile void __iomem *celleb_epci_get_epci_cfg(
+					struct pci_controller *hose)
+{
+	/*
+	 * Note:
+	 * Celleb epci uses cfg_data as a base address for
+	 * configuration area for epci devices.
+	 */
+
+	return hose->cfg_data;
+}
 
 #if 0 /* test code for epci dummy read */
 static void celleb_epci_dummy_read(struct pci_dev *dev)
 {
-	void __iomem *epci_base;
+	volatile void __iomem *epci_base;
 	struct device_node *node;
 	struct pci_controller *hose;
 	u32 val;
@@ -58,7 +81,7 @@ static void celleb_epci_dummy_read(struct pci_dev *dev)
 	if (!hose)
 		return;
 
-	epci_base = hose->cfg_addr;
+	epci_base = celleb_epci_get_epci_base(hose);
 
 	val = in_be32(epci_base + SCC_EPCI_WATRP);
 	iosync();
@@ -70,19 +93,20 @@ static void celleb_epci_dummy_read(struct pci_dev *dev)
 static inline void clear_and_disable_master_abort_interrupt(
 					struct pci_controller *hose)
 {
-	void __iomem *addr;
-	addr = hose->cfg_addr + PCI_COMMAND;
-	out_be32(addr, in_be32(addr) | (PCI_STATUS_REC_MASTER_ABORT << 16));
+	volatile void __iomem *epci_base, *reg;
+	epci_base = celleb_epci_get_epci_base(hose);
+	reg = epci_base + PCI_COMMAND;
+	out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16));
 }
 
 static int celleb_epci_check_abort(struct pci_controller *hose,
-				   void __iomem *addr)
+				   volatile void __iomem *addr)
 {
-	void __iomem *reg, *epci_base;
+	volatile void __iomem *reg, *epci_base;
 	u32 val;
 
 	iob();
-	epci_base = hose->cfg_addr;
+	epci_base = celleb_epci_get_epci_base(hose);
 
 	reg = epci_base + PCI_COMMAND;
 	val = in_be32(reg);
@@ -108,20 +132,21 @@ static int celleb_epci_check_abort(struct pci_controller *hose,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static void __iomem *celleb_epci_make_config_addr(struct pci_controller *hose,
+static volatile void __iomem *celleb_epci_make_config_addr(
+					struct pci_controller *hose,
 					unsigned int devfn, int where)
 {
-	void __iomem *addr;
+	volatile void __iomem *addr;
 	struct pci_bus *bus = hose->bus;
 
 	if (bus->self)
-		addr = hose->cfg_data +
+		addr = celleb_epci_get_epci_cfg(hose) +
 		       (((bus->number & 0xff) << 16)
 		        | ((devfn & 0xff) << 8)
 		        | (where & 0xff)
 		        | 0x01000000);
 	else
-		addr = hose->cfg_data +
+		addr = celleb_epci_get_epci_cfg(hose) +
 		       (((devfn & 0xff) << 8) | (where & 0xff));
 
 	pr_debug("EPCI: config_addr = 0x%p\n", addr);
@@ -132,7 +157,7 @@ static void __iomem *celleb_epci_make_config_addr(struct pci_controller *hose,
 static int celleb_epci_read_config(struct pci_bus *bus,
 			unsigned int devfn, int where, int size, u32 * val)
 {
-	void __iomem *addr;
+	volatile void __iomem *epci_base, *addr;
 	struct device_node *node;
 	struct pci_controller *hose;
 
@@ -142,13 +167,14 @@ static int celleb_epci_read_config(struct pci_bus *bus,
 	node = (struct device_node *)bus->sysdata;
 	hose = pci_find_hose_for_OF_device(node);
 
-	if (!hose->cfg_data)
+	if (!celleb_epci_get_epci_cfg(hose))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (bus->number == hose->first_busno && devfn == 0) {
 		/* EPCI controller self */
 
-		addr = hose->cfg_addr + where;
+		epci_base = celleb_epci_get_epci_base(hose);
+		addr = epci_base + where;
 
 		switch (size) {
 		case 1:
@@ -185,7 +211,7 @@ static int celleb_epci_read_config(struct pci_bus *bus,
 	}
 
 	pr_debug("EPCI: "
-		 "addr=0x%lx, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
+		 "addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
 		 addr, devfn, where, size, *val);
 
 	return celleb_epci_check_abort(hose, NULL);
@@ -194,7 +220,7 @@ static int celleb_epci_read_config(struct pci_bus *bus,
 static int celleb_epci_write_config(struct pci_bus *bus,
 			unsigned int devfn, int where, int size, u32 val)
 {
-	void __iomem *addr;
+	volatile void __iomem *epci_base, *addr;
 	struct device_node *node;
 	struct pci_controller *hose;
 
@@ -204,13 +230,15 @@ static int celleb_epci_write_config(struct pci_bus *bus,
 	node = (struct device_node *)bus->sysdata;
 	hose = pci_find_hose_for_OF_device(node);
 
-	if (!hose->cfg_data)
+
+	if (!celleb_epci_get_epci_cfg(hose))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (bus->number == hose->first_busno && devfn == 0) {
 		/* EPCI controller self */
 
-		addr = hose->cfg_addr + where;
+		epci_base = celleb_epci_get_epci_base(hose);
+		addr = epci_base + where;
 
 		switch (size) {
 		case 1:
@@ -258,10 +286,10 @@ struct pci_ops celleb_epci_ops = {
 static int __devinit celleb_epci_init(struct pci_controller *hose)
 {
 	u32 val;
-	void __iomem *reg, *epci_base;
+	volatile void __iomem *reg, *epci_base;
 	int hwres = 0;
 
-	epci_base = hose->cfg_addr;
+	epci_base = celleb_epci_get_epci_base(hose);
 
 	/* PCI core reset(Internal bus and PCI clock) */
 	reg = epci_base + SCC_EPCI_CKCTRL;
@@ -382,6 +410,18 @@ int __devinit celleb_setup_epci(struct device_node *node,
 
 	pr_debug("PCI: celleb_setup_epci()\n");
 
+	/*
+	 * Note:
+	 * Celleb epci uses cfg_addr and cfg_data member of
+	 * pci_controller structure in irregular way.
+	 *
+	 * cfg_addr is used to map for control registers of
+	 * celleb epci.
+	 *
+	 * cfg_data is used for configuration area of devices
+	 * on Celleb epci buses.
+	 */
+
 	if (of_address_to_resource(node, 0, &r))
 		goto error;
 	hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c
index 1de63acfda87..596ab2a788d4 100644
--- a/arch/powerpc/platforms/celleb/setup.c
+++ b/arch/powerpc/platforms/celleb/setup.c
@@ -67,7 +67,7 @@ static void celleb_show_cpuinfo(struct seq_file *m)
 
 	root = of_find_node_by_path("/");
 	if (root)
-		model = get_property(root, "model", NULL);
+		model = of_get_property(root, "model", NULL);
 	/* using "CHRP" is to trick anaconda into installing FCx into Celleb */
 	seq_printf(m, "machine\t\t: %s %s\n", celleb_machine_type, model);
 	of_node_put(root);
@@ -128,19 +128,12 @@ static int __init celleb_probe(void)
 	return 1;
 }
 
-/*
- * Cell has no legacy IO; anything calling this function has to
- * fail or bad things will happen
- */
-static int celleb_check_legacy_ioport(unsigned int baseport)
-{
-	return -ENODEV;
-}
-
+#ifdef CONFIG_KEXEC
 static void celleb_kexec_cpu_down(int crash, int secondary)
 {
 	beatic_deinit_IRQ();
 }
+#endif
 
 static struct of_device_id celleb_bus_ids[] = {
 	{ .type = "scc", },
@@ -171,7 +164,6 @@ define_machine(celleb) {
 	.get_rtc_time		= beat_get_rtc_time,
 	.set_rtc_time		= beat_set_rtc_time,
 	.calibrate_decr		= generic_calibrate_decr,
-	.check_legacy_ioport	= celleb_check_legacy_ioport,
 	.progress		= celleb_progress,
 	.power_save		= beat_power_save,
 	.nvram_size		= beat_nvram_get_size,
diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig
new file mode 100644
index 000000000000..d2c690531963
--- /dev/null
+++ b/arch/powerpc/platforms/chrp/Kconfig
@@ -0,0 +1,11 @@
+config PPC_CHRP
+	bool "Common Hardware Reference Platform (CHRP) based machines"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select MPIC
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
+	select PPC_RTAS
+	select PPC_MPC106
+	select PPC_UDBG_16550
+	select PPC_NATIVE
+	default y
diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c
index 0dd4a64757d9..8efd4244701c 100644
--- a/arch/powerpc/platforms/chrp/nvram.c
+++ b/arch/powerpc/platforms/chrp/nvram.c
@@ -74,7 +74,7 @@ void __init chrp_nvram_init(void)
 	if (nvram == NULL)
 		return;
 
-	nbytes_p = get_property(nvram, "#bytes", &proplen);
+	nbytes_p = of_get_property(nvram, "#bytes", &proplen);
 	if (nbytes_p == NULL || proplen != sizeof(unsigned int))
 		return;
 
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index ddb4a116ea89..1469d6478f67 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -7,7 +7,6 @@
 #include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -137,9 +136,11 @@ hydra_init(void)
 	struct device_node *np;
 	struct resource r;
 
-	np = find_devices("mac-io");
-	if (np == NULL || of_address_to_resource(np, 0, &r))
+	np = of_find_node_by_name(NULL, "mac-io");
+	if (np == NULL || of_address_to_resource(np, 0, &r)) {
+		of_node_put(np);
 		return 0;
+	}
 	Hydra = ioremap(r.start, r.end-r.start);
 	printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
 	printk("Hydra Feature_Control was %x",
@@ -186,10 +187,9 @@ setup_python(struct pci_controller *hose, struct device_node *dev)
 /* Marvell Discovery II based Pegasos 2 */
 static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
 {
-	struct device_node *root = find_path_device("/");
+	struct device_node *root = of_find_node_by_path("/");
 	struct device_node *rtas;
 
-	of_node_get(root);
 	rtas = of_find_node_by_name (root, "rtas");
 	if (rtas) {
 		hose->ops = &rtas_pci_ops;
@@ -199,6 +199,7 @@ static void __init setup_peg2(struct pci_controller *hose, struct device_node *d
 			" your firmware\n");
 	}
 	pci_assign_all_buses = 1;
+	/* keep the reference to the root node */
 }
 
 void __init
@@ -211,14 +212,14 @@ chrp_find_bridges(void)
 	const unsigned int *dma;
 	const char *model, *machine;
 	int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
-	struct device_node *root = find_path_device("/");
+	struct device_node *root = of_find_node_by_path("/");
 	struct resource r;
 	/*
 	 * The PCI host bridge nodes on some machines don't have
 	 * properties to adequately identify them, so we have to
 	 * look at what sort of machine this is as well.
 	 */
-	machine = get_property(root, "model", NULL);
+	machine = of_get_property(root, "model", NULL);
 	if (machine != NULL) {
 		is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
 		is_mot = strncmp(machine, "MOT", 3) == 0;
@@ -237,7 +238,7 @@ chrp_find_bridges(void)
 			       dev->full_name);
 			continue;
 		}
-		bus_range = get_property(dev, "bus-range", &len);
+		bus_range = of_get_property(dev, "bus-range", &len);
 		if (bus_range == NULL || len < 2 * sizeof(int)) {
 			printk(KERN_WARNING "Can't get bus-range for %s\n",
 				dev->full_name);
@@ -263,7 +264,7 @@ chrp_find_bridges(void)
 		hose->first_busno = bus_range[0];
 		hose->last_busno = bus_range[1];
 
-		model = get_property(dev, "model", NULL);
+		model = of_get_property(dev, "model", NULL);
 		if (model == NULL)
 			model = "<none>";
 		if (device_is_compatible(dev, "IBM,python")) {
@@ -285,7 +286,8 @@ chrp_find_bridges(void)
 					   r.start + 0x000f8000,
 					   r.start + 0x000f8010);
 			if (index == 0) {
-				dma = get_property(dev, "system-dma-base",&len);
+				dma = of_get_property(dev, "system-dma-base",
+							&len);
 				if (dma && len >= sizeof(*dma)) {
 					dma = (unsigned int *)
 						(((unsigned long)dma) +
@@ -303,12 +305,13 @@ chrp_find_bridges(void)
 
 		/* check the first bridge for a property that we can
 		   use to set pci_dram_offset */
-		dma = get_property(dev, "ibm,dma-ranges", &len);
+		dma = of_get_property(dev, "ibm,dma-ranges", &len);
 		if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
 			pci_dram_offset = dma[2] - dma[3];
 			printk("pci_dram_offset = %lx\n", pci_dram_offset);
 		}
 	}
+	of_node_put(root);
 }
 
 /* SL82C105 IDE Control/Status Register */
diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c
index 6ad4b1a72c96..71045677559a 100644
--- a/arch/powerpc/platforms/chrp/pegasos_eth.c
+++ b/arch/powerpc/platforms/chrp/pegasos_eth.c
@@ -58,6 +58,7 @@ static struct resource mv643xx_eth0_resources[] = {
 
 
 static struct mv643xx_eth_platform_data eth0_pd = {
+	.port_number	= 0,
 	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0,
 	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
 	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
@@ -87,6 +88,7 @@ static struct resource mv643xx_eth1_resources[] = {
 };
 
 static struct mv643xx_eth_platform_data eth1_pd = {
+	.port_number	= 1,
 	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1,
 	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
 	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 117c9a0055bd..1870038a8e0a 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -28,7 +28,6 @@
 #include <linux/adb.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/console.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
@@ -111,9 +110,9 @@ void chrp_show_cpuinfo(struct seq_file *m)
 	struct device_node *root;
 	const char *model = "";
 
-	root = find_path_device("/");
+	root = of_find_node_by_path("/");
 	if (root)
-		model = get_property(root, "model", NULL);
+		model = of_get_property(root, "model", NULL);
 	seq_printf(m, "machine\t\t: CHRP %s\n", model);
 
 	/* longtrail (goldengate) stuff */
@@ -161,6 +160,7 @@ void chrp_show_cpuinfo(struct seq_file *m)
 			   gg2_cachetypes[(t>>2) & 3],
 			   gg2_cachemodes[t & 3]);
 	}
+	of_node_put(root);
 }
 
 /*
@@ -205,13 +205,15 @@ static void __init sio_init(void)
 {
 	struct device_node *root;
 
-	if ((root = find_path_device("/")) &&
-	    !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
+	if ((root = of_find_node_by_path("/")) &&
+	    !strncmp(of_get_property(root, "model", NULL),
+			"IBM,LongTrail", 13)) {
 		/* logical device 0 (KBC/Keyboard) */
 		sio_fixup_irq("keyboard", 0, 1, 2);
 		/* select logical device 1 (KBC/Mouse) */
 		sio_fixup_irq("mouse", 1, 12, 2);
 	}
+	of_node_put(root);
 }
 
 
@@ -224,12 +226,12 @@ static void __init pegasos_set_l2cr(void)
 		return;
 
 	/* Enable L2 cache if needed */
-	np = find_type_devices("cpu");
+	np = of_find_node_by_type(NULL, "cpu");
 	if (np != NULL) {
-		const unsigned int *l2cr = get_property(np, "l2cr", NULL);
+		const unsigned int *l2cr = of_get_property(np, "l2cr", NULL);
 		if (l2cr == NULL) {
 			printk ("Pegasos l2cr : no cpu l2cr property found\n");
-			return;
+			goto out;
 		}
 		if (!((*l2cr) & 0x80000000)) {
 			printk ("Pegasos l2cr : L2 cache was not active, "
@@ -238,6 +240,8 @@ static void __init pegasos_set_l2cr(void)
 			_set_L2CR((*l2cr) | 0x80000000);
 		}
 	}
+out:
+	of_node_put(np);
 }
 
 static void briq_restart(char *cmd)
@@ -250,14 +254,14 @@ static void briq_restart(char *cmd)
 
 void __init chrp_setup_arch(void)
 {
-	struct device_node *root = find_path_device ("/");
+	struct device_node *root = of_find_node_by_path("/");
 	const char *machine = NULL;
 
 	/* init to some ~sane value until calibrate_delay() runs */
 	loops_per_jiffy = 50000000/HZ;
 
 	if (root)
-		machine = get_property(root, "model", NULL);
+		machine = of_get_property(root, "model", NULL);
 	if (machine && strncmp(machine, "Pegasos", 7) == 0) {
 		_chrp_type = _CHRP_Pegasos;
 	} else if (machine && strncmp(machine, "IBM", 3) == 0) {
@@ -273,6 +277,7 @@ void __init chrp_setup_arch(void)
 		/* Let's assume it is an IBM chrp if all else fails */
 		_chrp_type = _CHRP_IBM;
 	}
+	of_node_put(root);
 	printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
 
 	rtas_initialize();
@@ -361,8 +366,8 @@ static void __init chrp_find_openpic(void)
 		return;
 	root = of_find_node_by_path("/");
 	if (root) {
-		opprop = get_property(root, "platform-open-pic", &oplen);
-		na = prom_n_addr_cells(root);
+		opprop = of_get_property(root, "platform-open-pic", &oplen);
+		na = of_n_addr_cells(root);
 	}
 	if (opprop && oplen >= na * sizeof(unsigned int)) {
 		opaddr = opprop[na-1];	/* assume 32-bit */
@@ -378,7 +383,7 @@ static void __init chrp_find_openpic(void)
 
 	printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
 
-	iranges = get_property(np, "interrupt-ranges", &len);
+	iranges = of_get_property(np, "interrupt-ranges", &len);
 	if (iranges == NULL)
 		len = 0;	/* non-distributed mpic */
 	else
@@ -427,7 +432,7 @@ static void __init chrp_find_openpic(void)
 	of_node_put(np);
 }
 
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
 static struct irqaction xmon_irqaction = {
 	.handler = xmon_irq,
 	.mask = CPU_MASK_NONE,
@@ -463,15 +468,16 @@ static void __init chrp_find_8259(void)
 	 * Also, Pegasos-type platforms don't have a proper node to start
 	 * from anyway
 	 */
-	for (np = find_devices("pci"); np != NULL; np = np->next) {
-		const unsigned int *addrp = get_property(np,
+	for_each_node_by_name(np, "pci") {
+		const unsigned int *addrp = of_get_property(np,
 				"8259-interrupt-acknowledge", NULL);
 
 		if (addrp == NULL)
 			continue;
-		chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
+		chrp_int_ack = addrp[of_n_addr_cells(np)-1];
 		break;
 	}
+	of_node_put(np);
 	if (np == NULL)
 		printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
 		       " address, polling\n");
@@ -493,7 +499,7 @@ static void __init chrp_find_8259(void)
 
 void __init chrp_init_IRQ(void)
 {
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
 	struct device_node *kbd;
 #endif
 	chrp_find_openpic();
@@ -510,13 +516,14 @@ void __init chrp_init_IRQ(void)
 	if (_chrp_type == _CHRP_Pegasos)
 		ppc_md.get_irq        = i8259_irq;
 
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
 	/* see if there is a keyboard in the device tree
 	   with a parent of type "adb" */
-	for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+	for_each_node_by_name(kbd, "keyboard")
 		if (kbd->parent && kbd->parent->type
 		    && strcmp(kbd->parent->type, "adb") == 0)
 			break;
+	of_node_put(kbd);
 	if (kbd)
 		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
 #endif
@@ -542,9 +549,9 @@ chrp_init2(void)
 	/* Get the event scan rate for the rtas so we know how
 	 * often it expects a heartbeat. -- Cort
 	 */
-	device = find_devices("rtas");
+	device = of_find_node_by_name(NULL, "rtas");
 	if (device)
-		p = get_property(device, "rtas-event-scan-rate", NULL);
+		p = of_get_property(device, "rtas-event-scan-rate", NULL);
 	if (p && *p) {
 		/*
 		 * Arrange to call chrp_event_scan at least *p times
@@ -571,6 +578,7 @@ chrp_init2(void)
 		printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
 		       *p, interval);
 	}
+	of_node_put(device);
 
 	if (ppc_md.progress)
 		ppc_md.progress("  Have fun!    ", 0x7777);
diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c
index 7d7889026936..96d1e4b3c493 100644
--- a/arch/powerpc/platforms/chrp/time.c
+++ b/arch/powerpc/platforms/chrp/time.c
@@ -39,12 +39,17 @@ long __init chrp_time_init(void)
 	struct resource r;
 	int base;
 
-	rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
+	rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00");
 	if (rtcs == NULL)
-		rtcs = find_compatible_devices("rtc", "ds1385-rtc");
-	if (rtcs == NULL || of_address_to_resource(rtcs, 0, &r))
+		rtcs = of_find_compatible_node(NULL, "rtc", "ds1385-rtc");
+	if (rtcs == NULL)
+		return 0;
+	if (of_address_to_resource(rtcs, 0, &r)) {
+		of_node_put(rtcs);
 		return 0;
-	
+	}
+	of_node_put(rtcs);
+
 	base = r.start;
 	nvram_as1 = 0;
 	nvram_as0 = base;
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 886c522d78e9..9557908ef545 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -2,83 +2,12 @@ choice
 	prompt "Machine Type"
 	depends on EMBEDDED6xx
 
-config KATANA
-	bool "Artesyn-Katana"
-	help
-	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
-	  cPCI board.
-
-config WILLOW
-	bool "Cogent-Willow"
-
-config CPCI690
-	bool "Force-CPCI690"
-	help
-	  Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
-	bool "Force-PowerPMC250"
-
-config CHESTNUT
-	bool "IBM 750FX Eval board or 750GX Eval board"
-	help
-	  Select CHESTNUT if configuring an IBM 750FX Eval Board or a
-	  IBM 750GX Eval board.
-
-config SPRUCE
-	bool "IBM-Spruce"
-	select PPC_INDIRECT_PCI
-
-config HDPU
-	bool "Sky-HDPU"
-	help
-	  Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
-	depends on HDPU
-	tristate "HDPU-Features"
-	help
-	  Select to enable HDPU enhanced features.
-
-config EV64260
-	bool "Marvell-EV64260BP"
-	help
-	  Select EV64260 if configuring a Marvell (formerly Galileo)
-	  EV64260BP Evaluation platform.
-
-config LOPEC
-	bool "Motorola-LoPEC"
-	select PPC_I8259
-
-config MVME5100
-	bool "Motorola-MVME5100"
-	select PPC_INDIRECT_PCI
-
-config PPLUS
-	bool "Motorola-PowerPlus"
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-
-config PRPMC750
-	bool "Motorola-PrPMC750"
-	select PPC_INDIRECT_PCI
-
-config PRPMC800
-	bool "Motorola-PrPMC800"
-	select PPC_INDIRECT_PCI
-
-config SANDPOINT
-	bool "Motorola-Sandpoint"
-	select PPC_I8259
-	help
-	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
-	  (any flavor).
-
 config LINKSTATION
 	bool "Linkstation / Kurobox(HG) from Buffalo"
 	select MPIC
 	select FSL_SOC
 	select PPC_UDBG_16550 if SERIAL_8250
+	select DEFAULT_UIMAGE
 	help
 	  Select LINKSTATION if configuring for one of PPC- (MPC8241)
 	  based NAS systems from Buffalo Technology. So far only
@@ -96,212 +25,24 @@ config MPC7448HPC2
 	help
 	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
 	  platform
-
-config RADSTONE_PPC7D
-	bool "Radstone Technology PPC7D board"
-	select PPC_I8259
-
-config PAL4
-	bool "SBS-Palomar4"
-
-config EST8260
-	bool "EST8260"
-	---help---
-	  The EST8260 is a single-board computer manufactured by Wind River
-	  Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-	  the MPC8260.  Wind River Systems has a website at
-	  <http://www.windriver.com/>, but the EST8260 cannot be found on it
-	  and has probably been discontinued or rebadged.
-
-config SBC82xx
-	bool "SBC82xx"
-	---help---
-	  SBC PowerQUICC II, single-board computer with MPC82xx CPU
-	  Manufacturer: Wind River Systems, Inc.
-	  Date of Release: May 2003
-	  End of Life: -
-	  URL: <http://www.windriver.com/>
-
-config SBS8260
-	bool "SBS8260"
-
-config RPX8260
-	bool "RPXSUPER"
-
-config TQM8260
-	bool "TQM8260"
-	---help---
-	  MPC8260 based module, little larger than credit card,
-	  up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-	  32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-	  2 x serial ports, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: June 2001
-	  End of Life: not yet :-)
-	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config ADS8272
-	bool "ADS8272"
-
-config PQ2FADS
-	bool "Freescale-PQ2FADS"
-	help
-	  Select PQ2FADS if you wish to configure for a Freescale
-	  PQ2FADS board (-VR or -ZU).
-
-config EV64360
-	bool "Marvell-EV64360BP"
-	help
-	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
-	  platform.
 endchoice
 
-config PQ2ADS
-	bool
-	depends on ADS8272
-	default y
-
-config TQM8xxL
-	bool
-	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
-	default y
-
-config 8260
-	bool "CPM2 Support" if WILLOW
-	depends on 6xx
-	default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
-	help
-	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
-	  this option means that you wish to build a kernel for a machine with
-	  an 8260 class CPU.
-
-config 8272
-	bool
-	depends on 6xx
-	default y if ADS8272
-	select 8260
-	help
-	  The MPC8272 CPM has a different internal dpram setup than other CPM2
-	  devices
-
-config CPM2
-	bool
-	depends on 8260 || MPC8560 || MPC8555
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it (826x, 827x, 8560).
-
-config PPC_GEN550
-	bool
-	depends on SANDPOINT || SPRUCE || PPLUS || \
-		PRPMC750 || PRPMC800 || LOPEC || \
-		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
-		83xx || LINKSTATION
-	default y
-
-config FORCE
-	bool
-	depends on 6xx && POWERPMC250
-	default y
-
-config GT64260
-	bool
-	depends on EV64260 || CPCI690
-	default y
-
-config MV64360		# Really MV64360 & MV64460
-	bool
-	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
-	default y
-
-config MV64X60
-	bool
-	depends on (GT64260 || MV64360)
-	select PPC_INDIRECT_PCI
-	default y
-
 config TSI108_BRIDGE
 	bool
 	depends on MPC7448HPC2
 	default y
 
-menu "Set bridge options"
-	depends on MV64X60
-
-config NOT_COHERENT_CACHE
-	bool "Turn off Cache Coherency"
-	default n
-	help
-	  Some 64x60 bridges lock up when trying to enforce cache coherency.
-	  When this option is selected, cache coherency will be turned off.
-	  Note that this can cause other problems (e.g., stale data being
-	  speculatively loaded via a cached mapping).  Use at your own risk.
-
-config MV64X60_BASE
-	hex "Set bridge base used by firmware"
-	default "0xf1000000"
-	help
-	  A firmware can leave the base address of the bridge's registers at
-	  a non-standard location.  If so, set this value to reflect the
-	  address of that non-standard location.
-
-config MV64X60_NEW_BASE
-	hex "Set bridge base used by kernel"
-	default "0xf1000000"
-	help
-	  If the current base address of the bridge's registers is not where
-	  you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
-	bool "Enable Non-Monarch Support"
-	depends on PRPMC800
-
-config HARRIER
-	bool
-	depends on PRPMC800
-	default y
-
-config EPIC_SERIAL_MODE
-	bool
-	depends on 6xx && (LOPEC || SANDPOINT)
-	default y
-
 config MPC10X_BRIDGE
 	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+	depends on LINKSTATION
 	select PPC_INDIRECT_PCI
 	default y
 
 config MPC10X_OPENPIC
 	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+	depends on LINKSTATION
 	default y
 
 config MPC10X_STORE_GATHERING
 	bool "Enable MPC10x store gathering"
 	depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
-	bool "Enable DUART mode on Sandpoint"
-	depends on SANDPOINT
-	help
-	  If this option is enabled then the MPC824x processor will run
-	  in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
-	bool "Enable Harrier store gathering"
-	depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
-	bool "MVME5100 configured with an IPMC761"
-	depends on MVME5100
-	select PPC_I8259
-
-config SPRUCE_BAUD_33M
-	bool "Spruce baud clock support"
-	depends on SPRUCE
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
index 3f6c4114f908..b412f006a9c5 100644
--- a/arch/powerpc/platforms/embedded6xx/linkstation.c
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -58,11 +58,11 @@ static int __init add_bridge(struct device_node *dev)
 {
 	int len;
 	struct pci_controller *hose;
-	int *bus_range;
+	const int *bus_range;
 
 	printk("Adding PCI host bridge %s\n", dev->full_name);
 
-	bus_range = (int *) get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int))
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 				" bus 0\n", dev->full_name);
@@ -106,7 +106,7 @@ static void __init linkstation_init_IRQ(void)
 {
 	struct mpic *mpic;
 	struct device_node *dnp;
-	void *prop;
+	const u32 *prop;
 	int size;
 	phys_addr_t paddr;
 
@@ -114,7 +114,7 @@ static void __init linkstation_init_IRQ(void)
 	if (dnp == NULL)
 		return;
 
-	prop = (struct device_node *)get_property(dnp, "reg", &size);
+	prop = of_get_property(dnp, "reg", &size);
 	paddr = (phys_addr_t)of_translate_address(dnp, prop);
 
 	mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC     ");
diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c
index 0e837762cc5b..d0bee9f19e4e 100644
--- a/arch/powerpc/platforms/embedded6xx/ls_uart.c
+++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c
@@ -110,8 +110,8 @@ static int __init ls_uarts_init(void)
 	if (!avr)
 		return -EINVAL;
 
-	avr_clock = *(u32*)get_property(avr, "clock-frequency", &len);
-	phys_addr = ((u32*)get_property(avr, "reg", &len))[0];
+	avr_clock = *(u32*)of_get_property(avr, "clock-frequency", &len);
+	phys_addr = ((u32*)of_get_property(avr, "reg", &len))[0];
 
 	if (!avr_clock || !phys_addr)
 		return -EINVAL;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index 3fcc85f60fbf..c3f64ddb0be6 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -25,7 +25,6 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -82,7 +81,7 @@ static void __init mpc7448_hpc2_setup_arch(void)
 	if (cpu != 0) {
 		const unsigned int *fp;
 
-		fp = get_property(cpu, "clock-frequency", NULL);
+		fp = of_get_property(cpu, "clock-frequency", NULL);
 		if (fp != 0)
 			loops_per_jiffy = *fp / HZ;
 		else
@@ -91,16 +90,6 @@ static void __init mpc7448_hpc2_setup_arch(void)
 	}
 	tsi108_csr_vir_base = get_vir_csrbase();
 
-#ifdef	CONFIG_ROOT_NFS
-	ROOT_DEV = Root_NFS;
-#else
-	ROOT_DEV = Root_HDA1;
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	ROOT_DEV = Root_RAM0;
-#endif
-
 	/* setup PCI host bridge */
 #ifdef CONFIG_PCI
 	for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
@@ -143,7 +132,7 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 	tsi_pic = of_find_node_by_type(NULL, "open-pic");
 	if (tsi_pic) {
 		unsigned int size;
-		const void *prop = get_property(tsi_pic, "reg", &size);
+		const void *prop = of_get_property(tsi_pic, "reg", &size);
 		mpic_paddr = of_translate_address(tsi_pic, prop);
 	}
 
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 54e6b3b6f261..46c3a8e7c3a8 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -1,3 +1,7 @@
+config PPC_ISERIES
+	bool "IBM Legacy iSeries"
+	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_INDIRECT_IO
 
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index d7a756d5135c..3b6a9666c2c0 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -171,7 +171,7 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
 {
 	struct iommu_table *tbl;
 	struct pci_dn *pdn = PCI_DN(dn);
-	const u32 *lsn = get_property(dn, "linux,logical-slot-number", NULL);
+	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
 	BUG_ON(lsn == NULL);
 
@@ -194,5 +194,5 @@ void iommu_init_early_iSeries(void)
 	ppc_md.tce_build = tce_build_iSeries;
 	ppc_md.tce_free  = tce_free_iSeries;
 
-	pci_dma_ops = &dma_iommu_ops;
+	set_pci_dma_ops(&dma_iommu_ops);
 }
diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c
index 5225abfafd9b..63b33675848b 100644
--- a/arch/powerpc/platforms/iseries/irq.c
+++ b/arch/powerpc/platforms/iseries/irq.c
@@ -30,7 +30,6 @@
 #include <linux/param.h>
 #include <linux/string.h>
 #include <linux/bootmem.h>
-#include <linux/ide.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 
@@ -337,6 +336,8 @@ unsigned int iSeries_get_irq(void)
 	return irq;
 }
 
+#ifdef CONFIG_PCI
+
 static int iseries_irq_host_map(struct irq_host *h, unsigned int virq,
 				irq_hw_number_t hw)
 {
@@ -384,3 +385,4 @@ void __init iSeries_init_IRQ(void)
 				"failed with rc 0x%x\n", ret);
 }
 
+#endif	/* CONFIG_PCI */
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 4a06d9c34986..9c974227155e 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -24,7 +24,6 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/ide.h>
 #include <linux/pci.h>
 
 #include <asm/io.h>
@@ -177,7 +176,7 @@ void __init iSeries_pci_final_fixup(void)
 			struct pci_dn *pdn = PCI_DN(node);
 			const u32 *agent;
 
-			agent = get_property(node, "linux,agent-id", NULL);
+			agent = of_get_property(node, "linux,agent-id", NULL);
 			if ((pdn != NULL) && (agent != NULL)) {
 				u8 irq = iSeries_allocate_IRQ(pdn->busno, 0,
 						pdn->bussubno);
@@ -755,7 +754,7 @@ void __init iSeries_pcibios_init(void)
 		if ((node->type == NULL) || (strcmp(node->type, "pci") != 0))
 			continue;
 
-		busp = get_property(node, "bus-range", NULL);
+		busp = of_get_property(node, "bus-range", NULL);
 		if (busp == NULL)
 			continue;
 		bus = *busp;
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index cce7e309340c..7f5dcee814d4 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -628,15 +628,6 @@ static void iseries_iounmap(volatile void __iomem *token)
 {
 }
 
-/*
- * iSeries has no legacy IO, anything calling this function has to
- * fail or bad things will happen
- */
-static int iseries_check_legacy_ioport(unsigned int baseport)
-{
-	return -ENODEV;
-}
-
 static int __init iseries_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -667,7 +658,6 @@ define_machine(iseries) {
 	.calibrate_decr	= generic_calibrate_decr,
 	.progress	= iSeries_progress,
 	.probe		= iseries_probe,
-	.check_legacy_ioport	= iseries_check_legacy_ioport,
 	.ioremap	= iseries_ioremap,
 	.iounmap	= iseries_iounmap,
 	/* XXX Implement enable_pmcs for iSeries */
diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c
index e2100ece9c65..2ca2d8a9de97 100644
--- a/arch/powerpc/platforms/iseries/viopath.c
+++ b/arch/powerpc/platforms/iseries/viopath.c
@@ -155,7 +155,7 @@ static int proc_viopath_show(struct seq_file *m, void *v)
 	node = of_find_node_by_path("/");
 	sysid = NULL;
 	if (node != NULL)
-		sysid = get_property(node, "system-id", NULL);
+		sysid = of_get_property(node, "system-id", NULL);
 
 	if (sysid == NULL)
 		seq_printf(m, "SRLNBR=<UNKNOWN>\n");
diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig
new file mode 100644
index 000000000000..f7c95eb5d8ba
--- /dev/null
+++ b/arch/powerpc/platforms/maple/Kconfig
@@ -0,0 +1,17 @@
+config PPC_MAPLE
+	depends on PPC_MULTIPLATFORM && PPC64
+	bool "Maple 970FX Evaluation Board"
+	select MPIC
+	select U3_DART
+	select MPIC_U3_HT_IRQS
+	select GENERIC_TBSYNC
+	select PPC_UDBG_16550
+	select PPC_970_NAP
+	select PPC_NATIVE
+	select PPC_RTAS
+	select MMIO_NVRAM
+	select ATA_NONSTANDARD if ATA
+	default n
+	help
+          This option enables support for the Maple 970FX Evaluation Board.
+	  For more information, refer to <http://www.970eval.com>
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 73c59904697f..b1d3b99c3f9d 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -44,11 +44,11 @@ static int __init fixup_one_level_bus_range(struct device_node *node, int higher
 		int len;
 
 		/* For PCI<->PCI bridges or CardBus bridges, we go down */
-		class_code = get_property(node, "class-code", NULL);
+		class_code = of_get_property(node, "class-code", NULL);
 		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
 			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
 			continue;
-		bus_range = get_property(node, "bus-range", &len);
+		bus_range = of_get_property(node, "bus-range", &len);
 		if (bus_range != NULL && len > 2 * sizeof(int)) {
 			if (bus_range[1] > higher)
 				higher = bus_range[1];
@@ -77,7 +77,7 @@ static void __init fixup_bus_range(struct device_node *bridge)
 			       bridge->full_name);
 		return;
 	}
-	bus_range = (int *)prop->value;
+	bus_range = prop->value;
 	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
 }
 
@@ -454,7 +454,7 @@ static int __init add_bridge(struct device_node *dev)
 
 	DBG("Adding PCI host bridge %s\n", dev->full_name);
 
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
 		dev->full_name);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 82d3f9e28d7c..2a30c5b2532e 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -32,7 +32,6 @@
 #include <linux/initrd.h>
 #include <linux/vt_kern.h>
 #include <linux/console.h>
-#include <linux/ide.h>
 #include <linux/pci.h>
 #include <linux/adb.h>
 #include <linux/cuda.h>
@@ -114,8 +113,8 @@ static void maple_restart(char *cmd)
 		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
 		goto fail;
 	}
-	maple_nvram_offset = get_property(sp, "restart-addr", NULL);
-	maple_nvram_command = get_property(sp, "restart-value", NULL);
+	maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);
+	maple_nvram_command = of_get_property(sp, "restart-value", NULL);
 	of_node_put(sp);
 
 	/* send command */
@@ -141,8 +140,8 @@ static void maple_power_off(void)
 		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
 		goto fail;
 	}
-	maple_nvram_offset = get_property(sp, "power-off-addr", NULL);
-	maple_nvram_command = get_property(sp, "power-off-value", NULL);
+	maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);
+	maple_nvram_command = of_get_property(sp, "power-off-value", NULL);
 	of_node_put(sp);
 
 	/* send command */
@@ -249,8 +248,8 @@ static void __init maple_init_IRQ(void)
 
 	/* Find address list in /platform-open-pic */
 	root = of_find_node_by_path("/");
-	naddr = prom_n_addr_cells(root);
-	opprop = get_property(root, "platform-open-pic", &opplen);
+	naddr = of_n_addr_cells(root);
+	opprop = of_get_property(root, "platform-open-pic", &opplen);
 	if (opprop != 0) {
 		openpic_addr = of_read_number(opprop, naddr);
 		has_isus = (opplen > naddr);
@@ -261,11 +260,11 @@ static void __init maple_init_IRQ(void)
 	BUG_ON(openpic_addr == 0);
 
 	/* Check for a big endian MPIC */
-	if (get_property(np, "big-endian", NULL) != NULL)
+	if (of_get_property(np, "big-endian", NULL) != NULL)
 		flags |= MPIC_BIG_ENDIAN;
 
 	/* XXX Maple specific bits */
-	flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET;
+	flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET;
 	/* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
 	flags |= MPIC_BIG_ENDIAN;
 
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 68dc529dfd2f..eb4dbc705b06 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -1,3 +1,15 @@
+config PPC_PASEMI
+	depends on PPC_MULTIPLATFORM && PPC64
+	bool "PA Semi SoC-based platforms"
+	default n
+	select MPIC
+	select PPC_UDBG_16550
+	select GENERIC_TBSYNC
+	select PPC_NATIVE
+	help
+	  This option enables support for PA Semi's PWRficient line
+	  of SoC processors, including PA6T-1682M
+
 menu "PA Semi PWRficient options"
 	depends on PPC_PASEMI
 
@@ -7,4 +19,11 @@ config PPC_PASEMI_IOMMU
 	help
 	  IOMMU support for PA6T-1682M
 
+config PPC_PASEMI_MDIO
+	depends on PHYLIB
+	tristate "MDIO support via GPIO"
+	default y
+	help
+	  Driver for MDIO via GPIO on PWRficient platforms
+
 endmenu
diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile
index e657ccae90a9..2cd2a4f26a48 100644
--- a/arch/powerpc/platforms/pasemi/Makefile
+++ b/arch/powerpc/platforms/pasemi/Makefile
@@ -1,2 +1,3 @@
 obj-y	+= setup.o pci.o time.o idle.o powersave.o iommu.o
-
+obj-$(CONFIG_PPC_PASEMI_MDIO)	+= gpio_mdio.o
+obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
new file mode 100644
index 000000000000..2a57d6023685
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2007 PA Semi, Inc
+ *
+ * Authors: Egor Martovetsky <egor@pasemi.com>
+ *	    Olof Johansson <olof@lixom.net>
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c:
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/timer.h>
+
+#include <asm/hw_irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+
+#define SDCASR_REG		0x0100
+#define SDCASR_REG_STRIDE	0x1000
+#define SDCPWR_CFGA0_REG	0x0100
+#define SDCPWR_PWST0_REG	0x0000
+#define SDCPWR_GIZTIME_REG	0x0440
+
+/* SDCPWR_GIZTIME_REG fields */
+#define SDCPWR_GIZTIME_GR	0x80000000
+#define SDCPWR_GIZTIME_LONGLOCK	0x000000ff
+
+/* Offset of ASR registers from SDC base */
+#define SDCASR_OFFSET		0x120000
+
+static void __iomem *sdcpwr_mapbase;
+static void __iomem *sdcasr_mapbase;
+
+static DEFINE_MUTEX(pas_switch_mutex);
+
+/* Current astate, is used when waking up from power savings on
+ * one core, in case the other core has switched states during
+ * the idle time.
+ */
+static int current_astate;
+
+/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
+static struct cpufreq_frequency_table pas_freqs[] = {
+	{0,	0},
+	{1,	0},
+	{2,	0},
+	{3,	0},
+	{4,	0},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr *pas_cpu_freqs_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+/*
+ * hardware specific functions
+ */
+
+static int get_astate_freq(int astate)
+{
+	u32 ret;
+	ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10));
+
+	return ret & 0x3f;
+}
+
+static int get_cur_astate(int cpu)
+{
+	u32 ret;
+
+	ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG);
+	ret = (ret >> (cpu * 4)) & 0x7;
+
+	return ret;
+}
+
+static int get_gizmo_latency(void)
+{
+	u32 giztime, ret;
+
+	giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG);
+
+	/* just provide the upper bound */
+	if (giztime & SDCPWR_GIZTIME_GR)
+		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000;
+	else
+		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000;
+
+	return ret;
+}
+
+static void set_astate(int cpu, unsigned int astate)
+{
+	u64 flags;
+
+	/* Return if called before init has run */
+	if (unlikely(!sdcasr_mapbase))
+		return;
+
+	local_irq_save(flags);
+
+	out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate);
+
+	local_irq_restore(flags);
+}
+
+void restore_astate(int cpu)
+{
+	set_astate(cpu, current_astate);
+}
+
+/*
+ * cpufreq functions
+ */
+
+static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	const u32 *max_freqp;
+	u32 max_freq;
+	int i, cur_astate;
+	struct resource res;
+	struct device_node *cpu, *dn;
+	int err = -ENODEV;
+
+	cpu = of_get_cpu_node(policy->cpu, NULL);
+
+	if (!cpu)
+		goto out;
+
+	dn = of_find_compatible_node(NULL, "sdc", "1682m-sdc");
+	if (!dn)
+		goto out;
+	err = of_address_to_resource(dn, 0, &res);
+	of_node_put(dn);
+	if (err)
+		goto out;
+	sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000);
+	if (!sdcasr_mapbase) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	dn = of_find_compatible_node(NULL, "gizmo", "1682m-gizmo");
+	if (!dn) {
+		err = -ENODEV;
+		goto out_unmap_sdcasr;
+	}
+	err = of_address_to_resource(dn, 0, &res);
+	of_node_put(dn);
+	if (err)
+		goto out_unmap_sdcasr;
+	sdcpwr_mapbase = ioremap(res.start, 0x1000);
+	if (!sdcpwr_mapbase) {
+		err = -EINVAL;
+		goto out_unmap_sdcasr;
+	}
+
+	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
+
+	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
+	if (!max_freqp) {
+		err = -EINVAL;
+		goto out_unmap_sdcpwr;
+	}
+
+	/* we need the freq in kHz */
+	max_freq = *max_freqp / 1000;
+
+	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
+	pr_debug("initializing frequency table\n");
+
+	/* initialize frequency table */
+	for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
+		pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000;
+		pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
+	}
+
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	policy->cpuinfo.transition_latency = get_gizmo_latency();
+
+	cur_astate = get_cur_astate(policy->cpu);
+	pr_debug("current astate is at %d\n",cur_astate);
+
+	policy->cur = pas_freqs[cur_astate].frequency;
+	policy->cpus = cpu_online_map;
+
+	cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu);
+
+	/* this ensures that policy->cpuinfo_min and policy->cpuinfo_max
+	 * are set correctly
+	 */
+	return cpufreq_frequency_table_cpuinfo(policy, pas_freqs);
+
+out_unmap_sdcpwr:
+	iounmap(sdcpwr_mapbase);
+
+out_unmap_sdcasr:
+	iounmap(sdcasr_mapbase);
+out:
+	return err;
+}
+
+static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	if (sdcasr_mapbase)
+		iounmap(sdcasr_mapbase);
+	if (sdcpwr_mapbase)
+		iounmap(sdcpwr_mapbase);
+
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static int pas_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pas_freqs);
+}
+
+static int pas_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	int pas_astate_new;
+	int i;
+
+	cpufreq_frequency_table_target(policy,
+				       pas_freqs,
+				       target_freq,
+				       relation,
+				       &pas_astate_new);
+
+	freqs.old = policy->cur;
+	freqs.new = pas_freqs[pas_astate_new].frequency;
+	freqs.cpu = policy->cpu;
+
+	mutex_lock(&pas_switch_mutex);
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
+		 policy->cpu,
+		 pas_freqs[pas_astate_new].frequency,
+		 pas_freqs[pas_astate_new].index);
+
+	current_astate = pas_astate_new;
+
+	for_each_online_cpu(i)
+		set_astate(i, pas_astate_new);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	mutex_unlock(&pas_switch_mutex);
+
+	return 0;
+}
+
+static struct cpufreq_driver pas_cpufreq_driver = {
+	.name		= "pas-cpufreq",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+	.init		= pas_cpufreq_cpu_init,
+	.exit		= pas_cpufreq_cpu_exit,
+	.verify		= pas_cpufreq_verify,
+	.target		= pas_cpufreq_target,
+	.attr		= pas_cpu_freqs_attr,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init pas_cpufreq_init(void)
+{
+	if (!machine_is_compatible("PA6T-1682M"))
+		return -ENODEV;
+
+	return cpufreq_register_driver(&pas_cpufreq_driver);
+}
+
+static void __exit pas_cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pas_cpufreq_driver);
+}
+
+module_init(pas_cpufreq_init);
+module_exit(pas_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>");
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
new file mode 100644
index 000000000000..c91a33593bb8
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Olof Johansson, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on drivers/net/fs_enet/mii-bitbang.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <asm/of_platform.h>
+
+#define DELAY 1
+
+static void __iomem *gpio_regs;
+
+struct gpio_priv {
+	int mdc_pin;
+	int mdio_pin;
+};
+
+#define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
+#define MDIO_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdio_pin)
+
+static inline void mdio_lo(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
+}
+
+static inline void mdio_hi(struct mii_bus *bus)
+{
+	out_le32(gpio_regs, 1 << MDIO_PIN(bus));
+}
+
+static inline void mdc_lo(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
+}
+
+static inline void mdc_hi(struct mii_bus *bus)
+{
+	out_le32(gpio_regs, 1 << MDC_PIN(bus));
+}
+
+static inline void mdio_active(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
+}
+
+static inline void mdio_tristate(struct mii_bus *bus)
+{
+	out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
+}
+
+static inline int mdio_read(struct mii_bus *bus)
+{
+	return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
+}
+
+static void clock_out(struct mii_bus *bus, int bit)
+{
+	if (bit)
+		mdio_hi(bus);
+	else
+		mdio_lo(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
+{
+	int i;
+
+	/* CFE uses a really long preamble (40 bits). We'll do the same. */
+	mdio_active(bus);
+	for (i = 0; i < 40; i++) {
+		clock_out(bus, 1);
+	}
+
+	/* send the start bit (01) and the read opcode (10) or write (10) */
+	clock_out(bus, 0);
+	clock_out(bus, 1);
+
+	clock_out(bus, read);
+	clock_out(bus, !read);
+
+	/* send the PHY address */
+	for (i = 0; i < 5; i++) {
+		clock_out(bus, (addr & 0x10) != 0);
+		addr <<= 1;
+	}
+
+	/* send the register address */
+	for (i = 0; i < 5; i++) {
+		clock_out(bus, (reg & 0x10) != 0);
+		reg <<= 1;
+	}
+}
+
+static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
+{
+	u16 rdreg;
+	int ret, i;
+	u8 addr = phy_id & 0xff;
+	u8 reg = location & 0xff;
+
+	bitbang_pre(bus, 1, addr, reg);
+
+	/* tri-state our MDIO I/O pin so we can read */
+	mdio_tristate(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+
+	/* read 16 bits of register data, MSB first */
+	rdreg = 0;
+	for (i = 0; i < 16; i++) {
+		mdc_lo(bus);
+		udelay(DELAY);
+		mdc_hi(bus);
+		udelay(DELAY);
+		mdc_lo(bus);
+		udelay(DELAY);
+		rdreg <<= 1;
+		rdreg |= mdio_read(bus);
+	}
+
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+	udelay(DELAY);
+
+	ret = rdreg;
+
+	return ret;
+}
+
+static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
+{
+	int i;
+
+	u8 addr = phy_id & 0xff;
+	u8 reg = location & 0xff;
+	u16 value = val & 0xffff;
+
+	bitbang_pre(bus, 0, addr, reg);
+
+	/* send the turnaround (10) */
+	mdc_lo(bus);
+	mdio_hi(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	mdc_lo(bus);
+	mdio_lo(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+
+	/* write 16 bits of register data, MSB first */
+	for (i = 0; i < 16; i++) {
+		mdc_lo(bus);
+		if (value & 0x8000)
+			mdio_hi(bus);
+		else
+			mdio_lo(bus);
+		udelay(DELAY);
+		mdc_hi(bus);
+		udelay(DELAY);
+		value <<= 1;
+	}
+
+	/*
+	 * Tri-state the MDIO line.
+	 */
+	mdio_tristate(bus);
+	mdc_lo(bus);
+	udelay(DELAY);
+	mdc_hi(bus);
+	udelay(DELAY);
+	return 0;
+}
+
+static int gpio_mdio_reset(struct mii_bus *bus)
+{
+	/*nothing here - dunno how to reset it*/
+	return 0;
+}
+
+
+static int __devinit gpio_mdio_probe(struct of_device *ofdev,
+				     const struct of_device_id *match)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *np = ofdev->node;
+	struct device_node *gpio_np;
+	struct mii_bus *new_bus;
+	struct resource res;
+	struct gpio_priv *priv;
+	const unsigned int *prop;
+	int err = 0;
+	int i;
+
+	gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
+
+	if (!gpio_np)
+		return -ENODEV;
+
+	err = of_address_to_resource(gpio_np, 0, &res);
+	of_node_put(gpio_np);
+
+	if (err)
+		return -EINVAL;
+
+	if (!gpio_regs)
+		gpio_regs = ioremap(res.start, 0x100);
+
+	if (!gpio_regs)
+		return -EPERM;
+
+	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
+
+	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+	if (new_bus == NULL)
+		return -ENOMEM;
+
+	new_bus->name = "pasemi gpio mdio bus",
+	new_bus->read = &gpio_mdio_read,
+	new_bus->write = &gpio_mdio_write,
+	new_bus->reset = &gpio_mdio_reset,
+
+	prop = of_get_property(np, "reg", NULL);
+	new_bus->id = *prop;
+	new_bus->priv = priv;
+
+	new_bus->phy_mask = 0;
+
+	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+	for(i = 0; i < PHY_MAX_ADDR; ++i)
+		new_bus->irq[i] = irq_create_mapping(NULL, 10);
+
+
+	prop = of_get_property(np, "mdc-pin", NULL);
+	priv->mdc_pin = *prop;
+
+	prop = of_get_property(np, "mdio-pin", NULL);
+	priv->mdio_pin = *prop;
+
+	new_bus->dev = dev;
+	dev_set_drvdata(dev, new_bus);
+
+	err = mdiobus_register(new_bus);
+
+	if (0 != err) {
+		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
+				new_bus->name, err);
+		goto bus_register_fail;
+	}
+
+	return 0;
+
+bus_register_fail:
+	kfree(new_bus);
+
+	return err;
+}
+
+
+static int gpio_mdio_remove(struct of_device *dev)
+{
+	struct mii_bus *bus = dev_get_drvdata(&dev->dev);
+
+	mdiobus_unregister(bus);
+
+	dev_set_drvdata(&dev->dev, NULL);
+
+	kfree(bus->priv);
+	bus->priv = NULL;
+	kfree(bus);
+
+	return 0;
+}
+
+static struct of_device_id gpio_mdio_match[] =
+{
+	{
+		.compatible      = "gpio-mdio",
+	},
+	{},
+};
+
+static struct of_platform_driver gpio_mdio_driver =
+{
+	.name		= "gpio-mdio-bitbang",
+	.match_table	= gpio_mdio_match,
+	.probe		= gpio_mdio_probe,
+	.remove		= gpio_mdio_remove,
+};
+
+int gpio_mdio_init(void)
+{
+	return of_register_platform_driver(&gpio_mdio_driver);
+}
+
+void gpio_mdio_exit(void)
+{
+	of_unregister_platform_driver(&gpio_mdio_driver);
+}
+device_initcall(gpio_mdio_init);
+
diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c
index 1ca3ff381591..5985ce0c5c48 100644
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@@ -61,6 +61,10 @@ static int pasemi_system_reset_exception(struct pt_regs *regs)
 		/* do system reset */
 		return 0;
 	}
+
+	/* Set higher astate since we come out of power savings at 0 */
+	restore_astate(hard_smp_processor_id());
+
 	/* everything handled */
 	regs->msr |= MSR_RI;
 	return 1;
@@ -68,6 +72,11 @@ static int pasemi_system_reset_exception(struct pt_regs *regs)
 
 void __init pasemi_idle_init(void)
 {
+#ifndef CONFIG_PPC_PASEMI_CPUFREQ
+	printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n");
+	current_mode = 0;
+#endif
+
 	ppc_md.system_reset_exception = pasemi_system_reset_exception;
 	ppc_md.power_save = modes[current_mode].entry;
 	printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name);
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 459a53b7d24d..95fa6a7d15ee 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -77,7 +77,7 @@
 #define IOBMAP_L2E_V		0x80000000
 #define IOBMAP_L2E_V_CACHED	0xc0000000
 
-static u32 *iob;
+static u32 __iomem *iob;
 static u32 iob_l1_emptyval;
 static u32 iob_l2_emptyval;
 static u32 *iob_l2_base;
@@ -249,13 +249,13 @@ void iommu_init_early_pasemi(void)
 	iommu_off = 1;
 #else
 	iommu_off = of_chosen &&
-			get_property(of_chosen, "linux,iommu-off", NULL);
+			of_get_property(of_chosen, "linux,iommu-off", NULL);
 #endif
 	if (iommu_off) {
 		/* Direct I/O, IOMMU off */
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_null;
 		ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_null;
-		pci_dma_ops = &dma_direct_ops;
+		set_pci_dma_ops(&dma_direct_ops);
 
 		return;
 	}
@@ -266,7 +266,7 @@ void iommu_init_early_pasemi(void)
 	ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pasemi;
 	ppc_md.tce_build = iobmap_build;
 	ppc_md.tce_free  = iobmap_free;
-	pci_dma_ops = &dma_iommu_ops;
+	set_pci_dma_ops(&dma_iommu_ops);
 }
 
 void __init alloc_iobmap_l2(void)
diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h
index 2d3927e6edb0..be8495497611 100644
--- a/arch/powerpc/platforms/pasemi/pasemi.h
+++ b/arch/powerpc/platforms/pasemi/pasemi.h
@@ -14,6 +14,14 @@ extern void __init pasemi_idle_init(void);
 extern void idle_spin(void);
 extern void idle_doze(void);
 
+/* Restore astate to last set */
+#ifdef CONFIG_PPC_PASEMI_CPUFREQ
+extern void restore_astate(int cpu);
+#else
+static inline void restore_astate(int cpu)
+{
+}
+#endif
 
 
 #endif /* _PASEMI_PASEMI_H */
diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
index 7ecb2ba24db9..056243da360b 100644
--- a/arch/powerpc/platforms/pasemi/pci.c
+++ b/arch/powerpc/platforms/pasemi/pci.c
@@ -33,7 +33,17 @@
 
 #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off))
 
-#define CONFIG_OFFSET_VALID(off) ((off) < 4096)
+static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset)
+{
+	/* Device 0 Function 0 is special: It's config space spans function 1 as
+	 * well, so allow larger offset. It's really a two-function device but the
+	 * second function does not probe.
+	 */
+	if (bus == 0 && devfn == 0)
+		return offset < 8192;
+	else
+		return offset < 4096;
+}
 
 static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose,
 				       u8 bus, u8 devfn, int offset)
@@ -51,7 +61,7 @@ static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
 	if (!hose)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (!CONFIG_OFFSET_VALID(offset))
+	if (!pa_pxp_offset_valid(bus->number, devfn, offset))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
 	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
@@ -85,7 +95,7 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn,
 	if (!hose)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	if (!CONFIG_OFFSET_VALID(offset))
+	if (!pa_pxp_offset_valid(bus->number, devfn, offset))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
 	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 449cf1a08291..f88f0ec4c8cb 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -35,6 +35,7 @@
 #include <asm/mpic.h>
 #include <asm/smp.h>
 #include <asm/time.h>
+#include <asm/of_platform.h>
 
 #include "pasemi.h"
 
@@ -101,12 +102,6 @@ void __init pas_setup_arch(void)
 	pasemi_idle_init();
 }
 
-/* No legacy IO on our parts */
-static int pas_check_legacy_ioport(unsigned int baseport)
-{
-	return -ENODEV;
-}
-
 static __init void pas_init_IRQ(void)
 {
 	struct device_node *np;
@@ -136,8 +131,8 @@ static __init void pas_init_IRQ(void)
 
 	/* Find address list in /platform-open-pic */
 	root = of_find_node_by_path("/");
-	naddr = prom_n_addr_cells(root);
-	opprop = get_property(root, "platform-open-pic", &opplen);
+	naddr = of_n_addr_cells(root);
+	opprop = of_get_property(root, "platform-open-pic", &opplen);
 	if (!opprop) {
 		printk(KERN_ERR "No platform-open-pic property.\n");
 		of_node_put(root);
@@ -147,7 +142,7 @@ static __init void pas_init_IRQ(void)
 	printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
 
 	mpic = mpic_alloc(mpic_node, openpic_addr,
-			  MPIC_PRIMARY|MPIC_LARGE_VECTORS,
+			  MPIC_PRIMARY|MPIC_LARGE_VECTORS|MPIC_WANTS_RESET,
 			  0, 0, " PAS-OPIC  ");
 	BUG_ON(!mpic);
 
@@ -209,6 +204,20 @@ static void __init pas_init_early(void)
 	iommu_init_early_pasemi();
 }
 
+static struct of_device_id pasemi_bus_ids[] = {
+	{ .type = "sdc", },
+	{},
+};
+
+static int __init pasemi_publish_devices(void)
+{
+	/* Publish OF platform devices for southbridge IOs */
+	of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+
+	return 0;
+}
+device_initcall(pasemi_publish_devices);
+
 
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
@@ -237,7 +246,6 @@ define_machine(pas) {
 	.restart		= pas_restart,
 	.get_boot_time		= pas_get_boot_time,
 	.calibrate_decr		= generic_calibrate_decr,
-	.check_legacy_ioport    = pas_check_legacy_ioport,
 	.progress		= pas_progress,
 	.machine_check_exception = pas_machine_check_handler,
 	.pci_irq_fixup		= pas_pci_irq_fixup,
diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig
new file mode 100644
index 000000000000..5b7afe50039a
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/Kconfig
@@ -0,0 +1,20 @@
+config PPC_PMAC
+	bool "Apple PowerMac based machines"
+	depends on PPC_MULTIPLATFORM
+	select MPIC
+	select PPC_INDIRECT_PCI if PPC32
+	select PPC_MPC106 if PPC32
+	select PPC_NATIVE
+	default y
+
+config PPC_PMAC64
+	bool
+	depends on PPC_PMAC && POWER4
+	select MPIC
+	select U3_DART
+	select MPIC_U3_HT_IRQS
+	select GENERIC_TBSYNC
+	select PPC_970_NAP
+	default y
+
+
diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c
index c3a89414ddc0..d679964ae2ab 100644
--- a/arch/powerpc/platforms/powermac/backlight.c
+++ b/arch/powerpc/platforms/powermac/backlight.c
@@ -37,33 +37,35 @@ static int pmac_backlight_set_legacy_queued;
  */
 static atomic_t kernel_backlight_disabled = ATOMIC_INIT(0);
 
-/* Protect the pmac_backlight variable */
+/* Protect the pmac_backlight variable below.
+   You should hold this lock when using the pmac_backlight pointer to
+   prevent its potential removal. */
 DEFINE_MUTEX(pmac_backlight_mutex);
 
 /* Main backlight storage
  *
- * Backlight drivers in this variable are required to have the "props"
+ * Backlight drivers in this variable are required to have the "ops"
  * attribute set and to have an update_status function.
  *
  * We can only store one backlight here, but since Apple laptops have only one
  * internal display, it doesn't matter. Other backlight drivers can be used
  * independently.
  *
- * Lock ordering:
- * pmac_backlight_mutex (global, main backlight)
- *   pmac_backlight->sem (backlight class)
  */
 struct backlight_device *pmac_backlight;
 
 int pmac_has_backlight_type(const char *type)
 {
-	struct device_node* bk_node = find_devices("backlight");
+	struct device_node* bk_node = of_find_node_by_name(NULL, "backlight");
 
 	if (bk_node) {
-		const char *prop = get_property(bk_node,
+		const char *prop = of_get_property(bk_node,
 				"backlight-control", NULL);
-		if (prop && strncmp(prop, type, strlen(type)) == 0)
+		if (prop && strncmp(prop, type, strlen(type)) == 0) {
+			of_node_put(bk_node);
 			return 1;
+		}
+		of_node_put(bk_node);
 	}
 
 	return 0;
@@ -104,8 +106,7 @@ static void pmac_backlight_key_worker(struct work_struct *work)
 		struct backlight_properties *props;
 		int brightness;
 
-		down(&pmac_backlight->sem);
-		props = pmac_backlight->props;
+		props = &pmac_backlight->props;
 
 		brightness = props->brightness +
 			((pmac_backlight_key_queued?-1:1) *
@@ -117,9 +118,7 @@ static void pmac_backlight_key_worker(struct work_struct *work)
 			brightness = props->max_brightness;
 
 		props->brightness = brightness;
-		props->update_status(pmac_backlight);
-
-		up(&pmac_backlight->sem);
+		backlight_update_status(pmac_backlight);
 	}
 	mutex_unlock(&pmac_backlight_mutex);
 }
@@ -145,8 +144,7 @@ static int __pmac_backlight_set_legacy_brightness(int brightness)
 	if (pmac_backlight) {
 		struct backlight_properties *props;
 
-		down(&pmac_backlight->sem);
-		props = pmac_backlight->props;
+		props = &pmac_backlight->props;
 		props->brightness = brightness *
 			(props->max_brightness + 1) /
 			(OLD_BACKLIGHT_MAX + 1);
@@ -156,8 +154,7 @@ static int __pmac_backlight_set_legacy_brightness(int brightness)
 		else if (props->brightness < 0)
 			props->brightness = 0;
 
-		props->update_status(pmac_backlight);
-		up(&pmac_backlight->sem);
+		backlight_update_status(pmac_backlight);
 
 		error = 0;
 	}
@@ -196,14 +193,11 @@ int pmac_backlight_get_legacy_brightness()
 	if (pmac_backlight) {
 		struct backlight_properties *props;
 
-		down(&pmac_backlight->sem);
-		props = pmac_backlight->props;
+		props = &pmac_backlight->props;
 
 		result = props->brightness *
 			(OLD_BACKLIGHT_MAX + 1) /
 			(props->max_brightness + 1);
-
-		up(&pmac_backlight->sem);
 	}
 	mutex_unlock(&pmac_backlight_mutex);
 
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index c2b6b4134f68..8943a9456bb7 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -421,7 +421,7 @@ static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 static u32 read_gpio(struct device_node *np)
 {
-	const u32 *reg = get_property(np, "reg", NULL);
+	const u32 *reg = of_get_property(np, "reg", NULL);
 	u32 offset;
 
 	if (reg == NULL)
@@ -521,13 +521,14 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 		int lenp, rc;
 		const u32 *freqs, *ratio;
 
-		freqs = get_property(cpunode, "bus-frequencies", &lenp);
+		freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
 		lenp /= sizeof(u32);
 		if (freqs == NULL || lenp != 2) {
 			printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
 			return 1;
 		}
-		ratio = get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+		ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
+						NULL);
 		if (ratio == NULL) {
 			printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
 			return 1;
@@ -562,7 +563,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	/* If we use the PMU, look for the min & max frequencies in the
 	 * device-tree
 	 */
-	value = get_property(cpunode, "min-clock-frequency", NULL);
+	value = of_get_property(cpunode, "min-clock-frequency", NULL);
 	if (!value)
 		return 1;
 	low_freq = (*value) / 1000;
@@ -571,7 +572,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 	if (low_freq < 100000)
 		low_freq *= 10;
 
-	value = get_property(cpunode, "max-clock-frequency", NULL);
+	value = of_get_property(cpunode, "max-clock-frequency", NULL);
 	if (!value)
 		return 1;
 	hi_freq = (*value) / 1000;
@@ -585,7 +586,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
 {
 	struct device_node *volt_gpio_np;
 
-	if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 		return 1;
 
 	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
@@ -614,11 +615,11 @@ static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
 	u32 pvr;
 	const u32 *value;
 
-	if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
 		return 1;
 
 	hi_freq = cur_freq;
-	value = get_property(cpunode, "reduced-clock-frequency", NULL);
+	value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
 	if (!value)
 		return 1;
 	low_freq = (*value) / 1000;
@@ -657,19 +658,19 @@ static int __init pmac_cpufreq_setup(void)
 		return 0;
 
 	/* Assume only one CPU */
-	cpunode = find_type_devices("cpu");
+	cpunode = of_find_node_by_type(NULL, "cpu");
 	if (!cpunode)
 		goto out;
 
 	/* Get current cpu clock freq */
-	value = get_property(cpunode, "clock-frequency", NULL);
+	value = of_get_property(cpunode, "clock-frequency", NULL);
 	if (!value)
 		goto out;
 	cur_freq = (*value) / 1000;
 
 	/*  Check for 7447A based MacRISC3 */
 	if (machine_is_compatible("MacRISC3") &&
-	    get_property(cpunode, "dynamic-power-step", NULL) &&
+	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
 	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
 		pmac_cpufreq_init_7447A(cpunode);
 	/* Check for other MacRISC3 machines */
@@ -707,6 +708,7 @@ static int __init pmac_cpufreq_setup(void)
 	else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
 		pmac_cpufreq_init_750FX(cpunode);
 out:
+	of_node_put(cpunode);
 	if (set_speed_proc == NULL)
 		return -ENODEV;
 
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 9d22361a26d6..567d5523b690 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -410,7 +410,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	/* Get first CPU node */
 	for (cpunode = NULL;
 	     (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
-		const u32 *reg = get_property(cpunode, "reg", NULL);
+		const u32 *reg = of_get_property(cpunode, "reg", NULL);
 		if (reg == NULL || (*reg) != 0)
 			continue;
 		if (!strcmp(cpunode->type, "cpu"))
@@ -422,7 +422,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	}
 
 	/* Check 970FX for now */
-	valp = get_property(cpunode, "cpu-version", NULL);
+	valp = of_get_property(cpunode, "cpu-version", NULL);
 	if (!valp) {
 		DBG("No cpu-version property !\n");
 		goto bail_noprops;
@@ -434,7 +434,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	}
 
 	/* Look for the powertune data in the device-tree */
-	g5_pmode_data = get_property(cpunode, "power-mode-data",&psize);
+	g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
 	if (!g5_pmode_data) {
 		DBG("No power-mode-data !\n");
 		goto bail_noprops;
@@ -493,7 +493,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
 	 * half freq in this version. So far, I haven't yet seen a machine
 	 * supporting anything else.
 	 */
-	valp = get_property(cpunode, "clock-frequency", NULL);
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
 	if (!valp)
 		return -ENODEV;
 	max_freq = (*valp)/1000;
@@ -563,7 +563,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	/* Lookup the cpuid eeprom node */
         cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
 	if (cpuid != NULL)
-		eeprom = get_property(cpuid, "cpuid", NULL);
+		eeprom = of_get_property(cpuid, "cpuid", NULL);
 	if (eeprom == NULL) {
 		printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
 		rc = -ENODEV;
@@ -573,13 +573,13 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	/* Lookup the i2c hwclock */
 	for (hwclock = NULL;
 	     (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
-		const char *loc = get_property(hwclock,
+		const char *loc = of_get_property(hwclock,
 				"hwctrl-location", NULL);
 		if (loc == NULL)
 			continue;
 		if (strcmp(loc, "CPU CLOCK"))
 			continue;
-		if (!get_property(hwclock, "platform-get-frequency", NULL))
+		if (!of_get_property(hwclock, "platform-get-frequency", NULL))
 			continue;
 		break;
 	}
@@ -638,7 +638,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
 	 */
 
 	/* Get max frequency from device-tree */
-	valp = get_property(cpunode, "clock-frequency", NULL);
+	valp = of_get_property(cpunode, "clock-frequency", NULL);
 	if (!valp) {
 		printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
 		rc = -ENODEV;
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index c29a6a064d22..52cfdd86c928 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -810,6 +810,7 @@ core99_ata100_enable(struct device_node *node, long value)
 	unsigned long flags;
 	struct pci_dev *pdev = NULL;
 	u8 pbus, pid;
+	int rc;
 
 	if (uninorth_rev < 0x24)
 		return -ENODEV;
@@ -828,7 +829,9 @@ core99_ata100_enable(struct device_node *node, long value)
 			pdev = pci_find_slot(pbus, pid);
 		if (pdev == NULL)
 			return 0;
-		pci_enable_device(pdev);
+		rc = pci_enable_device(pdev);
+		if (rc)
+			return rc;
 		pci_set_master(pdev);
 	}
 	return 0;
@@ -1041,6 +1044,7 @@ core99_reset_cpu(struct device_node *node, long param, long value)
 	unsigned long flags;
 	struct macio_chip *macio;
 	struct device_node *np;
+	struct device_node *cpus;
 	const int dflt_reset_lines[] = {	KL_GPIO_RESET_CPU0,
 						KL_GPIO_RESET_CPU1,
 						KL_GPIO_RESET_CPU2,
@@ -1050,12 +1054,12 @@ core99_reset_cpu(struct device_node *node, long param, long value)
 	if (macio->type != macio_keylargo)
 		return -ENODEV;
 
-	np = find_path_device("/cpus");
-	if (np == NULL)
+	cpus = of_find_node_by_path("/cpus");
+	if (cpus == NULL)
 		return -ENODEV;
-	for (np = np->child; np != NULL; np = np->sibling) {
-		const u32 *num = get_property(np, "reg", NULL);
-		const u32 *rst = get_property(np, "soft-reset", NULL);
+	for (np = cpus->child; np != NULL; np = np->sibling) {
+		const u32 *num = of_get_property(np, "reg", NULL);
+		const u32 *rst = of_get_property(np, "soft-reset", NULL);
 		if (num == NULL || rst == NULL)
 			continue;
 		if (param == *num) {
@@ -1063,6 +1067,7 @@ core99_reset_cpu(struct device_node *node, long param, long value)
 			break;
 		}
 	}
+	of_node_put(cpus);
 	if (np == NULL || reset_io == 0)
 		reset_io = dflt_reset_lines[param];
 
@@ -1092,7 +1097,7 @@ core99_usb_enable(struct device_node *node, long param, long value)
 	    macio->type != macio_intrepid)
 		return -ENODEV;
 
-	prop = get_property(node, "AAPL,clock-id", NULL);
+	prop = of_get_property(node, "AAPL,clock-id", NULL);
 	if (!prop)
 		return -ENODEV;
 	if (strncmp(prop, "usb0u048", 8) == 0)
@@ -1494,17 +1499,18 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
 	unsigned long flags;
 	struct macio_chip *macio;
 	struct device_node *np;
+	struct device_node *cpus;
 
 	macio = &macio_chips[0];
 	if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
 		return -ENODEV;
 
-	np = find_path_device("/cpus");
-	if (np == NULL)
+	cpus = of_find_node_by_path("/cpus");
+	if (cpus == NULL)
 		return -ENODEV;
-	for (np = np->child; np != NULL; np = np->sibling) {
-		const u32 *num = get_property(np, "reg", NULL);
-		const u32 *rst = get_property(np, "soft-reset", NULL);
+	for (np = cpus->child; np != NULL; np = np->sibling) {
+		const u32 *num = of_get_property(np, "reg", NULL);
+		const u32 *rst = of_get_property(np, "soft-reset", NULL);
 		if (num == NULL || rst == NULL)
 			continue;
 		if (param == *num) {
@@ -1512,6 +1518,7 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
 			break;
 		}
 	}
+	of_node_put(cpus);
 	if (np == NULL || reset_io == 0)
 		return -ENODEV;
 
@@ -2401,14 +2408,15 @@ static int __init probe_motherboard(void)
 	struct macio_chip *macio = &macio_chips[0];
 	const char *model = NULL;
 	struct device_node *dt;
+	int ret = 0;
 
 	/* Lookup known motherboard type in device-tree. First try an
 	 * exact match on the "model" property, then try a "compatible"
 	 * match is none is found.
 	 */
-	dt = find_devices("device-tree");
+	dt = of_find_node_by_name(NULL, "device-tree");
 	if (dt != NULL)
-		model = get_property(dt, "model", NULL);
+		model = of_get_property(dt, "model", NULL);
 	for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
 	    if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
 		pmac_mb = pmac_mb_defs[i];
@@ -2471,15 +2479,18 @@ static int __init probe_motherboard(void)
 		break;
 #endif /* CONFIG_POWER4 */
 	default:
-		return -ENODEV;
+		ret = -ENODEV;
+		goto done;
 	}
 found:
 #ifndef CONFIG_POWER4
 	/* Fixup Hooper vs. Comet */
 	if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
 		u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
-		if (!mach_id_ptr)
-			return -ENODEV;
+		if (!mach_id_ptr) {
+			ret = -ENODEV;
+			goto done;
+		}
 		/* Here, I used to disable the media-bay on comet. It
 		 * appears this is wrong, the floppy connector is actually
 		 * a kind of media-bay and works with the current driver.
@@ -2496,18 +2507,26 @@ found:
 	 * that all Apple OF revs did it properly, I do it the paranoid way.
 	 */
 	while (uninorth_base && uninorth_rev > 3) {
-		struct device_node *np = find_path_device("/cpus");
-		if (!np || !np->child) {
+		struct device_node *cpus = of_find_node_by_path("/cpus");
+		struct device_node *np;
+
+		if (!cpus || !cpus->child) {
 			printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
+			of_node_put(cpus);
 			break;
 		}
-		np = np->child;
+		np = cpus->child;
 		/* Nap mode not supported on SMP */
-		if (np->sibling)
+		if (np->sibling) {
+			of_node_put(cpus);
 			break;
+		}
 		/* Nap mode not supported if flush-on-lock property is present */
-		if (get_property(np, "flush-on-lock", NULL))
+		if (of_get_property(np, "flush-on-lock", NULL)) {
+			of_node_put(cpus);
 			break;
+		}
+		of_node_put(cpus);
 		powersave_nap = 1;
 		printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
 		break;
@@ -2529,7 +2548,9 @@ found:
 
 
 	printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
-	return 0;
+done:
+	of_node_put(dt);
+	return ret;
 }
 
 /* Initialize the Core99 UniNorth host bridge and memory controller
@@ -2555,7 +2576,7 @@ static void __init probe_uninorth(void)
 	if (uninorth_node == NULL)
 		return;
 
-	addrp = get_property(uninorth_node, "reg", NULL);
+	addrp = of_get_property(uninorth_node, "reg", NULL);
 	if (addrp == NULL)
 		return;
 	address = of_translate_address(uninorth_node, addrp);
@@ -2639,7 +2660,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 		return;
 	}
 	if (type == macio_keylargo || type == macio_keylargo2) {
-		const u32 *did = get_property(node, "device-id", NULL);
+		const u32 *did = of_get_property(node, "device-id", NULL);
 		if (*did == 0x00000025)
 			type = macio_pangea;
 		if (*did == 0x0000003e)
@@ -2652,7 +2673,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 	macio_chips[i].base	= base;
 	macio_chips[i].flags	= MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
 	macio_chips[i].name	= macio_names[type];
-	revp = get_property(node, "revision-id", NULL);
+	revp = of_get_property(node, "revision-id", NULL);
 	if (revp)
 		macio_chips[i].rev = *revp;
 	printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
@@ -2703,8 +2724,8 @@ initial_serial_shutdown(struct device_node *np)
 	int port_type = PMAC_SCC_ASYNC;
 	int modem = 0;
 
-	slots = get_property(np, "slot-names", &len);
-	conn = get_property(np, "AAPL,connector", &len);
+	slots = of_get_property(np, "slot-names", &len);
+	conn = of_get_property(np, "AAPL,connector", &len);
 	if (conn && (strcmp(conn, "infrared") == 0))
 		port_type = PMAC_SCC_IRDA;
 	else if (device_is_compatible(np, "cobalt"))
@@ -2732,12 +2753,14 @@ set_initial_features(void)
 	 * differenciate them all and since that hack was there for a long
 	 * time, I'll keep it around
 	 */
-	if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
+	if (macio_chips[0].type == macio_ohare) {
 		struct macio_chip *macio = &macio_chips[0];
-		MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
-	} else if (macio_chips[0].type == macio_ohare) {
-		struct macio_chip *macio = &macio_chips[0];
-		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+		np = of_find_node_by_name(NULL, "via-pmu");
+		if (np)
+			MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+		else
+			MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+		of_node_put(np);
 	} else if (macio_chips[1].type == macio_ohare) {
 		struct macio_chip *macio = &macio_chips[1];
 		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
@@ -2830,14 +2853,13 @@ set_initial_features(void)
 		}
 
 		/* Switch airport off */
-		np = find_devices("radio");
-		while(np) {
+		for_each_node_by_name(np, "radio") {
 			if (np && np->parent == macio_chips[0].of_node) {
 				macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
 				core99_airport_enable(np, 0, 0);
 			}
-			np = np->next;
 		}
+		of_node_put(np);
 	}
 
 	/* On all machines that support sound PM, switch sound off */
@@ -2857,16 +2879,12 @@ set_initial_features(void)
 #endif /* CONFIG_POWER4 */
 
 	/* On all machines, switch modem & serial ports off */
-	np = find_devices("ch-a");
-	while(np) {
+	for_each_node_by_name(np, "ch-a")
 		initial_serial_shutdown(np);
-		np = np->next;
-	}
-	np = find_devices("ch-b");
-	while(np) {
+	of_node_put(np);
+	for_each_node_by_name(np, "ch-b")
 		initial_serial_shutdown(np);
-		np = np->next;
-	}
+	of_node_put(np);
 }
 
 void __init
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index bfc4829162f1..5430e146b3e9 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -491,7 +491,7 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 	 * on all i2c keywest nodes so far ... we would have to fallback
 	 * to macio parsing if that wasn't the case
 	 */
-	addrp = get_property(np, "AAPL,address", NULL);
+	addrp = of_get_property(np, "AAPL,address", NULL);
 	if (addrp == NULL) {
 		printk(KERN_ERR "low_i2c: Can't find address for %s\n",
 		       np->full_name);
@@ -505,13 +505,13 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 	host->timeout_timer.function = kw_i2c_timeout;
 	host->timeout_timer.data = (unsigned long)host;
 
-	psteps = get_property(np, "AAPL,address-step", NULL);
+	psteps = of_get_property(np, "AAPL,address-step", NULL);
 	steps = psteps ? (*psteps) : 0x10;
 	for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
 		steps >>= 1;
 	/* Select interface rate */
 	host->speed = KW_I2C_MODE_25KHZ;
-	prate = get_property(np, "AAPL,i2c-rate", NULL);
+	prate = of_get_property(np, "AAPL,i2c-rate", NULL);
 	if (prate) switch(*prate) {
 	case 100:
 		host->speed = KW_I2C_MODE_100KHZ;
@@ -619,7 +619,7 @@ static void __init kw_i2c_probe(void)
 		} else {
 			for (child = NULL;
 			     (child = of_get_next_child(np, child)) != NULL;) {
-				const u32 *reg = get_property(child,
+				const u32 *reg = of_get_property(child,
 						"reg", NULL);
 				if (reg == NULL)
 					continue;
@@ -905,7 +905,7 @@ static void __init smu_i2c_probe(void)
 		if (strcmp(busnode->type, "i2c") &&
 		    strcmp(busnode->type, "i2c-bus"))
 			continue;
-		reg = get_property(busnode, "reg", NULL);
+		reg = of_get_property(busnode, "reg", NULL);
 		if (reg == NULL)
 			continue;
 
@@ -950,7 +950,8 @@ struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
 			if (p == bus->busnode) {
 				if (prev && bus->flags & pmac_i2c_multibus) {
 					const u32 *reg;
-					reg = get_property(prev, "reg", NULL);
+					reg = of_get_property(prev, "reg",
+								NULL);
 					if (!reg)
 						continue;
 					if (((*reg) >> 8) != bus->channel)
@@ -971,7 +972,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
 
 u8 pmac_i2c_get_dev_addr(struct device_node *device)
 {
-	const u32 *reg = get_property(device, "reg", NULL);
+	const u32 *reg = of_get_property(device, "reg", NULL);
 
 	if (reg == NULL)
 		return 0;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index f42475b27c15..22c4ae4c6934 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -70,11 +70,11 @@ static int __init fixup_one_level_bus_range(struct device_node *node, int higher
 		int len;
 
 		/* For PCI<->PCI bridges or CardBus bridges, we go down */
-		class_code = get_property(node, "class-code", NULL);
+		class_code = of_get_property(node, "class-code", NULL);
 		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
 			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
 			continue;
-		bus_range = get_property(node, "bus-range", &len);
+		bus_range = of_get_property(node, "bus-range", &len);
 		if (bus_range != NULL && len > 2 * sizeof(int)) {
 			if (bus_range[1] > higher)
 				higher = bus_range[1];
@@ -100,7 +100,7 @@ static void __init fixup_bus_range(struct device_node *bridge)
 	if (prop == NULL || prop->length < 2 * sizeof(int))
 		return;
 
-	bus_range = (int *)prop->value;
+	bus_range = prop->value;
 	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
 }
 
@@ -246,8 +246,8 @@ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
 	if (np == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	vendor = get_property(np, "vendor-id", NULL);
-	device = get_property(np, "device-id", NULL);
+	vendor = of_get_property(np, "vendor-id", NULL);
+	device = of_get_property(np, "device-id", NULL);
 	if (vendor == NULL || device == NULL)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -622,13 +622,14 @@ static void __init init_p2pbridge(void)
 
 	/* XXX it would be better here to identify the specific
 	   PCI-PCI bridge chip we have. */
-	if ((p2pbridge = find_devices("pci-bridge")) == 0
+	p2pbridge = of_find_node_by_name(NULL, "pci-bridge");
+	if (p2pbridge == NULL
 	    || p2pbridge->parent == NULL
 	    || strcmp(p2pbridge->parent->name, "pci") != 0)
-		return;
+		goto done;
 	if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
 		DBG("Can't find PCI infos for PCI<->PCI bridge\n");
-		return;
+		goto done;
 	}
 	/* Warning: At this point, we have not yet renumbered all busses.
 	 * So we must use OF walking to find out hose
@@ -636,16 +637,18 @@ static void __init init_p2pbridge(void)
 	hose = pci_find_hose_for_OF_device(p2pbridge);
 	if (!hose) {
 		DBG("Can't find hose for PCI<->PCI bridge\n");
-		return;
+		goto done;
 	}
 	if (early_read_config_word(hose, bus, devfn,
 				   PCI_BRIDGE_CONTROL, &val) < 0) {
 		printk(KERN_ERR "init_p2pbridge: couldn't read bridge"
 		       " control\n");
-		return;
+		goto done;
 	}
 	val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
 	early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+done:
+	of_node_put(p2pbridge);
 }
 
 static void __init init_second_ohare(void)
@@ -691,17 +694,17 @@ static void __init fixup_nec_usb2(void)
 		const u32 *prop;
 		u8 bus, devfn;
 
-		prop = get_property(nec, "vendor-id", NULL);
+		prop = of_get_property(nec, "vendor-id", NULL);
 		if (prop == NULL)
 			continue;
 		if (0x1033 != *prop)
 			continue;
-		prop = get_property(nec, "device-id", NULL);
+		prop = of_get_property(nec, "device-id", NULL);
 		if (prop == NULL)
 			continue;
 		if (0x0035 != *prop)
 			continue;
-		prop = get_property(nec, "reg", NULL);
+		prop = of_get_property(nec, "reg", NULL);
 		if (prop == NULL)
 			continue;
 		devfn = (prop[0] >> 8) & 0xff;
@@ -909,7 +912,7 @@ static int __init add_bridge(struct device_node *dev)
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
 	/* Get bus range if any */
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
@@ -1191,13 +1194,15 @@ void __init pmac_pcibios_after_init(void)
 	 * -- BenH
 	 */
 	for_each_pci_dev(dev) {
-		if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE)
-			pci_enable_device(dev);
+		if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE)
+			continue;
+		if (pci_enable_device(dev))
+			printk(KERN_WARNING
+			       "pci: Failed to enable %s\n", pci_name(dev));
 	}
 #endif /* CONFIG_BLK_DEV_IDE */
 
-	nd = find_devices("firewire");
-	while (nd) {
+	for_each_node_by_name(nd, "firewire") {
 		if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
 				   device_is_compatible(nd, "pci106b,30") ||
 				   device_is_compatible(nd, "pci11c1,5811"))
@@ -1205,15 +1210,14 @@ void __init pmac_pcibios_after_init(void)
 			pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
 			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
 		}
-		nd = nd->next;
 	}
-	nd = find_devices("ethernet");
-	while (nd) {
+	of_node_put(nd);
+	for_each_node_by_name(nd, "ethernet") {
 		if (nd->parent && device_is_compatible(nd, "gmac")
 		    && device_is_compatible(nd->parent, "uni-north"))
 			pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
-		nd = nd->next;
 	}
+	of_node_put(nd);
 }
 
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c
index 5c6c15c5f9a3..45d54b9ad9e0 100644
--- a/arch/powerpc/platforms/powermac/pfunc_base.c
+++ b/arch/powerpc/platforms/powermac/pfunc_base.c
@@ -114,7 +114,7 @@ static void macio_gpio_init_one(struct macio_chip *macio)
 	 * we just create them all
 	 */
 	for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) {
-		const u32 *reg = get_property(gp, "reg", NULL);
+		const u32 *reg = of_get_property(gp, "reg", NULL);
 		unsigned long offset;
 		if (reg == NULL)
 			continue;
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 7651f278615a..85434231ae14 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -692,8 +692,7 @@ static int pmf_add_functions(struct pmf_device *dev, void *driverdata)
 		name = pp->name + plen;
 		if (strlen(name) && pp->length >= 12)
 			count += pmf_add_function_prop(dev, driverdata, name,
-						       (u32 *)pp->value,
-						       pp->length);
+						       pp->value, pp->length);
 	}
 	return count;
 }
@@ -821,7 +820,7 @@ struct pmf_function *__pmf_find_function(struct device_node *target,
 	 * one, then we fallback to a direct call attempt
 	 */
 	snprintf(fname, 63, "platform-%s", name);
-	prop = get_property(target, fname, NULL);
+	prop = of_get_property(target, fname, NULL);
 	if (prop == NULL)
 		goto find_it;
 	ph = *prop;
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 5e5c0e4add91..ae5097ac0378 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -482,14 +482,14 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
 	pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
 
 	flags |= MPIC_WANTS_RESET;
-	if (get_property(np, "big-endian", NULL))
+	if (of_get_property(np, "big-endian", NULL))
 		flags |= MPIC_BIG_ENDIAN;
 
 	/* Primary Big Endian means HT interrupts. This is quite dodgy
 	 * but works until I find a better way
 	 */
 	if (master && (flags & MPIC_BIG_ENDIAN))
-		flags |= MPIC_BROKEN_U3;
+		flags |= MPIC_U3_HT_IRQS;
 
 	mpic = mpic_alloc(np, r.start, flags, 0, 0, name);
 	if (mpic == NULL)
@@ -510,7 +510,7 @@ static int __init pmac_pic_probe_mpic(void)
 	for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
 		     != NULL;) {
 		if (master == NULL &&
-		    get_property(np, "interrupts", NULL) == NULL)
+		    of_get_property(np, "interrupts", NULL) == NULL)
 			master = of_node_get(np);
 		else if (slave == NULL)
 			slave = of_node_get(np);
@@ -575,7 +575,7 @@ void __init pmac_pic_init(void)
 #ifdef CONFIG_PPC32
 	if (!pmac_newworld)
 		flags |= OF_IMAP_OLDWORLD_MAC;
-	if (get_property(of_chosen, "linux,bootx", NULL) != NULL)
+	if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL)
 		flags |= OF_IMAP_NO_PHANDLE;
 #endif /* CONFIG_PPC_32 */
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 651fa424ea06..b820cabac697 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -42,7 +42,6 @@
 #include <linux/initrd.h>
 #include <linux/vt_kern.h>
 #include <linux/console.h>
-#include <linux/ide.h>
 #include <linux/pci.h>
 #include <linux/adb.h>
 #include <linux/cuda.h>
@@ -135,12 +134,12 @@ static void pmac_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "machine\t\t: ");
 	np = of_find_node_by_path("/");
 	if (np != NULL) {
-		pp = get_property(np, "model", NULL);
+		pp = of_get_property(np, "model", NULL);
 		if (pp != NULL)
 			seq_printf(m, "%s\n", pp);
 		else
 			seq_printf(m, "PowerMac\n");
-		pp = get_property(np, "compatible", &plen);
+		pp = of_get_property(np, "compatible", &plen);
 		if (pp != NULL) {
 			seq_printf(m, "motherboard\t:");
 			while (plen > 0) {
@@ -164,11 +163,13 @@ static void pmac_show_cpuinfo(struct seq_file *m)
 	if (np == NULL)
 		np = of_find_node_by_type(NULL, "cache");
 	if (np != NULL) {
-		const unsigned int *ic = get_property(np, "i-cache-size", NULL);
-		const unsigned int *dc = get_property(np, "d-cache-size", NULL);
+		const unsigned int *ic =
+			of_get_property(np, "i-cache-size", NULL);
+		const unsigned int *dc =
+			of_get_property(np, "d-cache-size", NULL);
 		seq_printf(m, "L2 cache\t:");
 		has_l2cache = 1;
-		if (get_property(np, "cache-unified", NULL) != 0 && dc) {
+		if (of_get_property(np, "cache-unified", NULL) != 0 && dc) {
 			seq_printf(m, " %dK unified", *dc / 1024);
 		} else {
 			if (ic)
@@ -177,7 +178,7 @@ static void pmac_show_cpuinfo(struct seq_file *m)
 				seq_printf(m, "%s %dK data",
 					   (ic? " +": ""), *dc / 1024);
 		}
-		pp = get_property(np, "ram-type", NULL);
+		pp = of_get_property(np, "ram-type", NULL);
 		if (pp)
 			seq_printf(m, " %s", pp);
 		seq_printf(m, "\n");
@@ -192,8 +193,11 @@ static void pmac_show_cpuinfo(struct seq_file *m)
 #ifndef CONFIG_ADB_CUDA
 int find_via_cuda(void)
 {
-	if (!find_devices("via-cuda"))
+	struct device_node *dn = of_find_node_by_name(NULL, "via-cuda");
+
+	if (!dn)
 		return 0;
+	of_node_put(dn);
 	printk("WARNING ! Your machine is CUDA-based but your kernel\n");
 	printk("          wasn't compiled with CONFIG_ADB_CUDA option !\n");
 	return 0;
@@ -203,8 +207,11 @@ int find_via_cuda(void)
 #ifndef CONFIG_ADB_PMU
 int find_via_pmu(void)
 {
-	if (!find_devices("via-pmu"))
+	struct device_node *dn = of_find_node_by_name(NULL, "via-pmu");
+
+	if (!dn)
 		return 0;
+	of_node_put(dn);
 	printk("WARNING ! Your machine is PMU-based but your kernel\n");
 	printk("          wasn't compiled with CONFIG_ADB_PMU option !\n");
 	return 0;
@@ -224,6 +231,8 @@ static volatile u32 *sysctrl_regs;
 
 static void __init ohare_init(void)
 {
+	struct device_node *dn;
+
 	/* this area has the CPU identification register
 	   and some registers used by smp boards */
 	sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000);
@@ -233,7 +242,9 @@ static void __init ohare_init(void)
 	 * We assume that we have a PSX memory controller iff
 	 * we have an ohare I/O controller.
 	 */
-	if (find_devices("ohare") != NULL) {
+	dn = of_find_node_by_name(NULL, "ohare");
+	if (dn) {
+		of_node_put(dn);
 		if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
 			if (sysctrl_regs[4] & 0x10)
 				sysctrl_regs[4] |= 0x04000020;
@@ -249,18 +260,19 @@ static void __init l2cr_init(void)
 {
 	/* Checks "l2cr-value" property in the registry */
 	if (cpu_has_feature(CPU_FTR_L2CR)) {
-		struct device_node *np = find_devices("cpus");
+		struct device_node *np = of_find_node_by_name(NULL, "cpus");
 		if (np == 0)
-			np = find_type_devices("cpu");
+			np = of_find_node_by_type(NULL, "cpu");
 		if (np != 0) {
 			const unsigned int *l2cr =
-				get_property(np, "l2cr-value", NULL);
+				of_get_property(np, "l2cr-value", NULL);
 			if (l2cr != 0) {
 				ppc_override_l2cr = 1;
 				ppc_override_l2cr_value = *l2cr;
 				_set_L2CR(0);
 				_set_L2CR(ppc_override_l2cr_value);
 			}
+			of_node_put(np);
 		}
 	}
 
@@ -286,7 +298,7 @@ static void __init pmac_setup_arch(void)
 	loops_per_jiffy = 50000000 / HZ;
 	cpu = of_find_node_by_type(NULL, "cpu");
 	if (cpu != NULL) {
-		fp = get_property(cpu, "clock-frequency", NULL);
+		fp = of_get_property(cpu, "clock-frequency", NULL);
 		if (fp != NULL) {
 			if (pvr >= 0x30 && pvr < 0x80)
 				/* PPC970 etc. */
@@ -303,7 +315,7 @@ static void __init pmac_setup_arch(void)
 
 	/* See if newworld or oldworld */
 	for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; )
-		if (get_property(ic, "interrupt-controller", NULL))
+		if (of_get_property(ic, "interrupt-controller", NULL))
 			break;
 	if (ic) {
 		pmac_newworld = 1;
@@ -341,8 +353,15 @@ static void __init pmac_setup_arch(void)
 
 #ifdef CONFIG_SMP
 	/* Check for Core99 */
-	if (find_devices("uni-n") || find_devices("u3") || find_devices("u4"))
+	ic = of_find_node_by_name(NULL, "uni-n");
+	if (!ic)
+		ic = of_find_node_by_name(NULL, "u3");
+	if (!ic)
+		ic = of_find_node_by_name(NULL, "u4");
+	if (ic) {
+		of_node_put(ic);
 		smp_ops = &core99_smp_ops;
+	}
 #ifdef CONFIG_PPC32
 	else
 		smp_ops = &psurge_smp_ops;
@@ -616,15 +635,6 @@ static void __init pmac_init_early(void)
 #endif
 }
 
-/*
- * pmac has no legacy IO, anything calling this function has to
- * fail or bad things will happen
- */
-static int pmac_check_legacy_ioport(unsigned int baseport)
-{
-	return -ENODEV;
-}
-
 static int __init pmac_declare_of_platform_devices(void)
 {
 	struct device_node *np;
@@ -736,7 +746,6 @@ define_machine(powermac) {
 	.get_rtc_time		= pmac_get_rtc_time,
 	.calibrate_decr		= pmac_calibrate_decr,
 	.feature_call		= pmac_do_feature_call,
-	.check_legacy_ioport	= pmac_check_legacy_ioport,
 	.progress		= udbg_progress,
 #ifdef CONFIG_PPC64
 	.pci_probe_mode		= pmac_pci_probe_mode,
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index d73fb73802bb..6f32c4eca6e5 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -264,6 +264,7 @@ static void __init psurge_quad_init(void)
 static int __init smp_psurge_probe(void)
 {
 	int i, ncpus;
+	struct device_node *dn;
 
 	/* We don't do SMP on the PPC601 -- paulus */
 	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
@@ -279,8 +280,10 @@ static int __init smp_psurge_probe(void)
 	 * in the hammerhead memory controller in the case of the
 	 * dual-cpu powersurge board.  -- paulus.
 	 */
-	if (find_devices("hammerhead") == NULL)
+	dn = of_find_node_by_name(NULL, "hammerhead");
+	if (dn == NULL)
 		return 1;
+	of_node_put(dn);
 
 	hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
 	quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
@@ -567,7 +570,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
 		pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
 		if (pmac_tb_clock_chip_host == NULL)
 			continue;
-		reg = get_property(cc, "reg", NULL);
+		reg = of_get_property(cc, "reg", NULL);
 		if (reg == NULL)
 			continue;
 		switch (*reg) {
@@ -695,7 +698,7 @@ static void __init smp_core99_setup(int ncpus)
 		struct device_node *cpus =
 			of_find_node_by_path("/cpus");
 		if (cpus &&
-		    get_property(cpus, "platform-cpu-timebase", NULL)) {
+		    of_get_property(cpus, "platform-cpu-timebase", NULL)) {
 			pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
 			printk(KERN_INFO "Processor timebase sync using"
 			       " platform function\n");
@@ -712,7 +715,7 @@ static void __init smp_core99_setup(int ncpus)
 		core99_tb_gpio = KL_GPIO_TB_ENABLE;	/* default value */
 		cpu = of_find_node_by_type(NULL, "cpu");
 		if (cpu != NULL) {
-			tbprop = get_property(cpu, "timebase-enable", NULL);
+			tbprop = of_get_property(cpu, "timebase-enable", NULL);
 			if (tbprop)
 				core99_tb_gpio = *tbprop;
 			of_node_put(cpu);
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index a4173906e945..bf9da56942e8 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -297,49 +297,11 @@ int __init via_calibrate_decr(void)
 }
 #endif
 
-#ifdef CONFIG_PM
-/*
- * Reset the time after a sleep.
- */
-static int
-time_sleep_notify(struct pmu_sleep_notifier *self, int when)
-{
-	static unsigned long time_diff;
-	unsigned long flags;
-	unsigned long seq;
-	struct timespec tv;
-
-	switch (when) {
-	case PBOOK_SLEEP_NOW:
-		do {
-			seq = read_seqbegin_irqsave(&xtime_lock, flags);
-			time_diff = xtime.tv_sec - pmac_get_boot_time();
-		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-		break;
-	case PBOOK_WAKE:
-		tv.tv_sec = pmac_get_boot_time() + time_diff;
-		tv.tv_nsec = 0;
-		do_settimeofday(&tv);
-		break;
-	}
-	return PBOOK_SLEEP_OK;
-}
-
-static struct pmu_sleep_notifier time_sleep_notifier = {
-	time_sleep_notify, SLEEP_LEVEL_MISC,
-};
-#endif /* CONFIG_PM */
-
 /*
  * Query the OF and get the decr frequency.
  */
 void __init pmac_calibrate_decr(void)
 {
-#if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU)
-	/* XXX why here? */
-	pmu_register_sleep_notifier(&time_sleep_notifier);
-#endif
-
 	generic_calibrate_decr();
 
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 379db05b0082..47de4d3fc167 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -81,7 +81,7 @@ void udbg_scc_init(int force_scc)
 	macio = of_get_parent(escc);
 	if (macio == NULL)
 		goto bail;
-	path = get_property(of_chosen, "linux,stdout-path", NULL);
+	path = of_get_property(of_chosen, "linux,stdout-path", NULL);
 	if (path != NULL)
 		stdout = of_find_node_by_path(path);
 	for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) {
@@ -96,13 +96,13 @@ void udbg_scc_init(int force_scc)
 	ch = ch_def ? ch_def : ch_a;
 
 	/* Get address within mac-io ASIC */
-	reg = get_property(escc, "reg", NULL);
+	reg = of_get_property(escc, "reg", NULL);
 	if (reg == NULL)
 		goto bail;
 	addr = reg[0];
 
 	/* Get address of mac-io PCI itself */
-	reg = get_property(macio, "assigned-addresses", NULL);
+	reg = of_get_property(macio, "assigned-addresses", NULL);
 	if (reg == NULL)
 		goto bail;
 	addr += reg[2];
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
index 673ac47a1626..29d411279b0c 100644
--- a/arch/powerpc/platforms/prep/Kconfig
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -1,3 +1,12 @@
+config PPC_PREP
+	bool "PowerPC Reference Platform (PReP) based machines"
+	depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+	select MPIC
+	select PPC_I8259
+	select PPC_INDIRECT_PCI
+	select PPC_UDBG_16550
+	select PPC_NATIVE
+	default n
 
 config PREP_RESIDUAL
 	bool "Support for PReP Residual Data"
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 4be3943d1c0d..40f0008af4d1 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -1,9 +1,40 @@
+config PPC_PS3
+	bool "Sony PS3 (incomplete)"
+	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_CELL
+	select USB_ARCH_HAS_OHCI
+	select USB_OHCI_LITTLE_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO
+	select USB_ARCH_HAS_EHCI
+	select USB_EHCI_BIG_ENDIAN_MMIO
+	help
+	  This option enables support for the Sony PS3 game console
+	  and other platforms using the PS3 hypervisor.
+	  Support for this platform is not yet complete, so
+	  enabling this will not result in a bootable kernel on a
+	  PS3 system.
+
 menu "PS3 Platform Options"
 	depends on PPC_PS3
 
+config PS3_ADVANCED
+	depends on PPC_PS3
+	bool "PS3 Advanced configuration options"
+	help
+	  This gives you access to some advanced options for the PS3. The
+	  defaults should be fine for most users, but these options may make
+	  it possible to better control the kernel configuration if you know
+	  what you are doing.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about these options.
+
+	  Most users should say N to this question.
+
 config PS3_HTAB_SIZE
 	depends on PPC_PS3
-	int "PS3 Platform pagetable size"
+	int "PS3 Platform pagetable size" if PS3_ADVANCED
 	range 18 20
 	default 20
 	help
@@ -42,7 +73,7 @@ config PS3_USE_LPAR_ADDR
 
 config PS3_VUART
 	depends on PPC_PS3
-	bool "PS3 Virtual UART support"
+	bool "PS3 Virtual UART support" if PS3_ADVANCED
 	default y
 	help
 	  Include support for the PS3 Virtual UART.
@@ -52,9 +83,8 @@ config PS3_VUART
 	  general, all users will say Y.
 
 config PS3_PS3AV
-	tristate "PS3 AV settings driver"
-	depends on PPC_PS3
-	select PS3_VUART
+	tristate "PS3 AV settings driver" if PS3_ADVANCED
+	depends on PS3_VUART
 	default y
 	help
 	  Include support for the PS3 AV Settings driver.
@@ -62,4 +92,14 @@ config PS3_PS3AV
 	  This support is required for graphics and sound. In
 	  general, all users will say Y or M.
 
+config PS3_SYS_MANAGER
+	bool "PS3 System Manager driver" if PS3_ADVANCED
+	depends on PS3_VUART
+	default y
+	help
+	  Include support for the PS3 System Manager.
+
+	  This support is required for system control.  In
+	  general, all users will say Y.
+
 endmenu
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index e12e59fea13a..ea60c451cf87 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -39,7 +39,7 @@ static unsigned long htab_addr;
 static unsigned char *bolttab;
 static unsigned char *inusetab;
 
-static spinlock_t ps3_bolttab_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(ps3_bolttab_lock);
 
 #define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \
 	_debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__)
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 42354de3f557..2014d2b44449 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -294,7 +294,7 @@ static int __init ps3_mm_add_memory(void)
 	unsigned long nr_pages;
 
 	if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
-		return 0;
+		return -ENODEV;
 
 	BUG_ON(!mem_init_done);
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 13d669a8ecae..ac5df9688dcb 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -42,6 +42,10 @@
 #define DBG(fmt...) do{if(0)printk(fmt);}while(0)
 #endif
 
+#if !defined(CONFIG_SMP)
+static void smp_send_stop(void) {}
+#endif
+
 int ps3_get_firmware_version(union ps3_firmware_version *v)
 {
 	int result = lv1_get_version_info(&v->raw);
@@ -66,22 +70,35 @@ static void ps3_power_save(void)
 	lv1_pause(0);
 }
 
+static void ps3_restart(char *cmd)
+{
+	DBG("%s:%d cmd '%s'\n", __func__, __LINE__, cmd);
+
+	smp_send_stop();
+	ps3_sys_manager_restart(); /* never returns */
+}
+
+static void ps3_power_off(void)
+{
+	DBG("%s:%d\n", __func__, __LINE__);
+
+	smp_send_stop();
+	ps3_sys_manager_power_off(); /* never returns */
+}
+
 static void ps3_panic(char *str)
 {
 	DBG("%s:%d %s\n", __func__, __LINE__, str);
 
-#ifdef CONFIG_SMP
 	smp_send_stop();
-#endif
 	printk("\n");
 	printk("   System does not reboot automatically.\n");
 	printk("   Please press POWER button.\n");
 	printk("\n");
 
-	for (;;) ;
+	while(1);
 }
 
-
 static void prealloc(struct ps3_prealloc *p)
 {
 	if (!p->size)
@@ -219,6 +236,8 @@ define_machine(ps3) {
 	.get_rtc_time			= ps3_get_rtc_time,
 	.calibrate_decr			= ps3_calibrate_decr,
 	.progress			= ps3_progress,
+	.restart			= ps3_restart,
+	.power_off			= ps3_power_off,
 #if defined(CONFIG_KEXEC)
 	.kexec_cpu_down			= ps3_kexec_cpu_down,
 	.machine_kexec			= ps3_machine_kexec,
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index a9f7e4a39a2a..3c48cce98a5c 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -172,7 +172,7 @@ int __init ps3_system_bus_init(void)
 	int result;
 
 	if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
-		return 0;
+		return -ENODEV;
 
 	result = bus_register(&ps3_system_bus_type);
 	BUG_ON(result);
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index a57032cf6f1b..16e4e401b820 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -1,3 +1,13 @@
+config PPC_PSERIES
+	depends on PPC_MULTIPLATFORM && PPC64
+	bool "IBM pSeries & new (POWER5-based) iSeries"
+	select MPIC
+	select PPC_I8259
+	select PPC_RTAS
+	select RTAS_ERROR_LOGGING
+	select PPC_UDBG_16550
+	select PPC_NATIVE
+	default y
 
 config PPC_SPLPAR
 	depends on PPC_PSERIES
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index dc0583bdbc63..90235d598751 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -2,14 +2,15 @@ ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
 
-obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
-			   setup.o iommu.o ras.o rtasd.o pci_dlpar.o \
-			   firmware.o
+obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
+			   setup.o iommu.o ras.o rtasd.o \
+			   firmware.o power.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_XICS)	+= xics.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
 obj-$(CONFIG_EEH)	+= eeh.o eeh_cache.o eeh_driver.o eeh_event.o
 obj-$(CONFIG_KEXEC)	+= kexec.o
+obj-$(CONFIG_PCI)	+= pci.o pci_dlpar.o
 
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu.o
 
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6cedbc002e0f..48fbd442e9df 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -74,7 +74,10 @@
  * is broken and panic.  This sets the threshold for how many read
  * attempts we allow before panicking.
  */
-#define EEH_MAX_FAILS	100000
+#define EEH_MAX_FAILS	2100000
+
+/* Time to wait for a PCI slot to retport status, in milliseconds */
+#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
 
 /* RTAS tokens */
 static int ibm_set_eeh_option;
@@ -83,6 +86,7 @@ static int ibm_read_slot_reset_state;
 static int ibm_read_slot_reset_state2;
 static int ibm_slot_error_detail;
 static int ibm_get_config_addr_info;
+static int ibm_get_config_addr_info2;
 static int ibm_configure_bridge;
 
 int eeh_subsystem_enabled;
@@ -168,6 +172,55 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
 }
 
 /**
+ * eeh_wait_for_slot_status - returns error status of slot
+ * @pdn pci device node
+ * @max_wait_msecs maximum number to millisecs to wait
+ *
+ * Return negative value if a permanent error, else return
+ * Partition Endpoint (PE) status value.
+ *
+ * If @max_wait_msecs is positive, then this routine will
+ * sleep until a valid status can be obtained, or until
+ * the max allowed wait time is exceeded, in which case
+ * a -2 is returned.
+ */
+int
+eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
+{
+	int rc;
+	int rets[3];
+	int mwait;
+
+	while (1) {
+		rc = read_slot_reset_state(pdn, rets);
+		if (rc) return rc;
+		if (rets[1] == 0) return -1;  /* EEH is not supported */
+
+		if (rets[0] != 5) return rets[0]; /* return actual status */
+
+		if (rets[2] == 0) return -1; /* permanently unavailable */
+
+		if (max_wait_msecs <= 0) return -1;
+
+		mwait = rets[2];
+		if (mwait <= 0) {
+			printk (KERN_WARNING
+			        "EEH: Firmware returned bad wait value=%d\n", mwait);
+			mwait = 1000;
+		} else if (mwait > 300*1000) {
+			printk (KERN_WARNING
+			        "EEH: Firmware is taking too long, time=%d\n", mwait);
+			mwait = 300*1000;
+		}
+		max_wait_msecs -= mwait;
+		msleep (mwait);
+	}
+
+	printk(KERN_WARNING "EEH: Timed out waiting for slot status\n");
+	return -2;
+}
+
+/**
  * eeh_token_to_phys - convert EEH address token to phys address
  * @token i/o token, should be address in the form 0xA....
  */
@@ -229,7 +282,7 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag)
 	dn = find_device_pe (dn);
 
 	/* Back up one, since config addrs might be shared */
-	if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr)
+	if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
 		dn = dn->parent;
 
 	PCI_DN(dn)->eeh_mode |= mode_flag;
@@ -263,7 +316,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
 	dn = find_device_pe (dn);
 	
 	/* Back up one, since config addrs might be shared */
-	if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr)
+	if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
 		dn = dn->parent;
 
 	PCI_DN(dn)->eeh_mode &= ~mode_flag;
@@ -293,7 +346,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	int rets[3];
 	unsigned long flags;
 	struct pci_dn *pdn;
-	enum pci_channel_state state;
 	int rc = 0;
 
 	total_mmio_ffs++;
@@ -367,25 +419,25 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 		goto dn_unlock;
 	}
 
-	/* If EEH is not supported on this device, punt. */
-	if (rets[1] != 1) {
-		printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
-		       ret, dn->full_name);
+	/* Note that config-io to empty slots may fail;
+	 * they are empty when they don't have children. */
+	if ((rets[0] == 5) && (dn->child == NULL)) {
 		false_positives++;
 		rc = 0;
 		goto dn_unlock;
 	}
 
-	/* If not the kind of error we know about, punt. */
-	if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
+	/* If EEH is not supported on this device, punt. */
+	if (rets[1] != 1) {
+		printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
+		       ret, dn->full_name);
 		false_positives++;
 		rc = 0;
 		goto dn_unlock;
 	}
 
-	/* Note that config-io to empty slots may fail;
-	 * we recognize empty because they don't have children. */
-	if ((rets[0] == 5) && (dn->child == NULL)) {
+	/* If not the kind of error we know about, punt. */
+	if (rets[0] != 1 && rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
 		false_positives++;
 		rc = 0;
 		goto dn_unlock;
@@ -399,17 +451,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	eeh_mark_slot (dn, EEH_MODE_ISOLATED);
 	spin_unlock_irqrestore(&confirm_error_lock, flags);
 
-	state = pci_channel_io_normal;
-	if ((rets[0] == 2) || (rets[0] == 4))
-		state = pci_channel_io_frozen;
-	if (rets[0] == 5)
-		state = pci_channel_io_perm_failure;
-	eeh_send_failure_event (dn, dev, state, rets[2]);
+	eeh_send_failure_event (dn, dev);
 
 	/* Most EEH events are due to device driver bugs.  Having
 	 * a stack trace will help the device-driver authors figure
 	 * out what happened.  So print that out. */
-	if (rets[0] != 5) dump_stack();
+	dump_stack();
 	return 1;
 
 dn_unlock:
@@ -458,38 +505,6 @@ EXPORT_SYMBOL(eeh_check_failure);
 /* The code below deals with error recovery */
 
 /**
- * eeh_slot_availability - returns error status of slot
- * @pdn pci device node
- *
- * Return negative value if a permanent error, else return
- * a number of milliseconds to wait until the PCI slot is
- * ready to be used.
- */
-static int
-eeh_slot_availability(struct pci_dn *pdn)
-{
-	int rc;
-	int rets[3];
-
-	rc = read_slot_reset_state(pdn, rets);
-
-	if (rc) return rc;
-
-	if (rets[1] == 0) return -1;  /* EEH is not supported */
-	if (rets[0] == 0) return 0;   /* Oll Korrect */
-	if (rets[0] == 5) {
-		if (rets[2] == 0) return -1; /* permanently unavailable */
-		return rets[2]; /* number of millisecs to wait */
-	}
-	if (rets[0] == 1)
-		return 250;
-
-	printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n",
-		rc, rets[0], rets[1], rets[2]);
-	return -2;
-}
-
-/**
  * rtas_pci_enable - enable MMIO or DMA transfers for this slot
  * @pdn pci device node
  */
@@ -512,9 +527,13 @@ rtas_pci_enable(struct pci_dn *pdn, int function)
 		            function);
 
 	if (rc)
-		printk(KERN_WARNING "EEH: Cannot enable function %d, err=%d dn=%s\n",
+		printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
 		        function, rc, pdn->node->full_name);
 
+	rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC);
+	if ((rc == 4) && (function == EEH_THAW_MMIO))
+		return 0;
+
 	return rc;
 }
 
@@ -595,36 +614,24 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
 {
 	int i, rc;
 
-	__rtas_set_slot_reset(pdn);
+	/* Take three shots at resetting the bus */
+	for (i=0; i<3; i++) {
+		__rtas_set_slot_reset(pdn);
 
-	/* Now double check with the firmware to make sure the device is
-	 * ready to be used; if not, wait for recovery. */
-	for (i=0; i<10; i++) {
-		rc = eeh_slot_availability (pdn);
+		rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
 		if (rc == 0)
 			return 0;
 
-		if (rc == -2) {
-			printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n",
-			        i, pdn->node->full_name);
-			__rtas_set_slot_reset(pdn);
-			continue;
-		}
-
 		if (rc < 0) {
 			printk (KERN_ERR "EEH: unrecoverable slot failure %s\n",
 			        pdn->node->full_name);
 			return -1;
 		}
-
-		msleep (rc+100);
+		printk (KERN_ERR "EEH: bus reset %d failed on slot %s\n",
+		        i+1, pdn->node->full_name);
 	}
 
-	rc = eeh_slot_availability (pdn);
-	if (rc)
-		printk (KERN_ERR "EEH: timeout resetting slot %s\n", pdn->node->full_name);
-
-	return rc;
+	return -1;
 }
 
 /* ------------------------------------------------------- */
@@ -744,16 +751,48 @@ struct eeh_early_enable_info {
 	unsigned int buid_lo;
 };
 
+static int get_pe_addr (int config_addr,
+                        struct eeh_early_enable_info *info)
+{
+	unsigned int rets[3];
+	int ret;
+
+	/* Use latest config-addr token on power6 */
+	if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
+		/* Make sure we have a PE in hand */
+		ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
+			config_addr, info->buid_hi, info->buid_lo, 1);
+		if (ret || (rets[0]==0))
+			return 0;
+
+		ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
+			config_addr, info->buid_hi, info->buid_lo, 0);
+		if (ret)
+			return 0;
+		return rets[0];
+	}
+
+	/* Use older config-addr token on power5 */
+	if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+		ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
+			config_addr, info->buid_hi, info->buid_lo, 0);
+		if (ret)
+			return 0;
+		return rets[0];
+	}
+	return 0;
+}
+
 /* Enable eeh for the given device node. */
 static void *early_enable_eeh(struct device_node *dn, void *data)
 {
 	unsigned int rets[3];
 	struct eeh_early_enable_info *info = data;
 	int ret;
-	const char *status = get_property(dn, "status", NULL);
-	const u32 *class_code = get_property(dn, "class-code", NULL);
-	const u32 *vendor_id = get_property(dn, "vendor-id", NULL);
-	const u32 *device_id = get_property(dn, "device-id", NULL);
+	const char *status = of_get_property(dn, "status", NULL);
+	const u32 *class_code = of_get_property(dn, "class-code", NULL);
+	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
+	const u32 *device_id = of_get_property(dn, "device-id", NULL);
 	const u32 *regs;
 	int enable;
 	struct pci_dn *pdn = PCI_DN(dn);
@@ -796,7 +835,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 
 	/* Ok... see if this device supports EEH.  Some do, some don't,
 	 * and the only way to find out is to check each and every one. */
-	regs = get_property(dn, "reg", NULL);
+	regs = of_get_property(dn, "reg", NULL);
 	if (regs) {
 		/* First register entry is addr (00BBSS00)  */
 		/* Try to enable eeh */
@@ -810,15 +849,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 
 			/* If the newer, better, ibm,get-config-addr-info is supported, 
 			 * then use that instead. */
-			pdn->eeh_pe_config_addr = 0;
-			if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
-				ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, 
-					pdn->eeh_config_addr, 
-					info->buid_hi, info->buid_lo,
-					0);
-				if (ret == 0)
-					pdn->eeh_pe_config_addr = rets[0];
-			}
+			pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
 
 			/* Some older systems (Power4) allow the
 			 * ibm,set-eeh-option call to succeed even on nodes
@@ -889,6 +920,7 @@ void __init eeh_init(void)
 	ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
 	ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
 	ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
+	ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
 	ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
 
 	if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index a4c0bf84ef2e..3170e003f76a 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -158,7 +158,8 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata)
 		return;
 
 	rc = driver->err_handler->slot_reset(dev);
-	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+	if ((*res == PCI_ERS_RESULT_NONE) ||
+	    (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
 	if (*res == PCI_ERS_RESULT_DISCONNECT &&
 	     rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 }
@@ -248,6 +249,7 @@ static void eeh_report_failure(struct pci_dev *dev, void *userdata)
 
 static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
 {
+	struct device_node *dn;
 	int cnt, rc;
 
 	/* pcibios will clear the counter; save the value */
@@ -263,23 +265,20 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
 	if (rc)
 		return rc;
 
- 	/* New-style config addrs might be shared across multiple devices,
- 	 * Walk over all functions on this device */
- 	if (pe_dn->eeh_pe_config_addr) {
- 		struct device_node *pe = pe_dn->node;
- 		pe = pe->parent->child;
- 		while (pe) {
- 			struct pci_dn *ppe = PCI_DN(pe);
- 			if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) {
- 				rtas_configure_bridge(ppe);
- 				eeh_restore_bars(ppe);
- 			}
- 			pe = pe->sibling;
+	/* Walk over all functions on this device.  */
+	dn = pe_dn->node;
+	if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+		dn = dn->parent->child;
+
+	while (dn) {
+		struct pci_dn *ppe = PCI_DN(dn);
+		/* On Power4, always true because eeh_pe_config_addr=0 */
+		if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) {
+			rtas_configure_bridge(ppe);
+			eeh_restore_bars(ppe);
  		}
- 	} else {
- 		rtas_configure_bridge(pe_dn);
- 		eeh_restore_bars(pe_dn);
- 	}
+		dn = dn->sibling;
+	}
 
 	/* Give the system 5 seconds to finish running the user-space
 	 * hotplug shutdown scripts, e.g. ifdown for ethernet.  Yes, 
@@ -299,7 +298,7 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
 /* The longest amount of time to wait for a pci device
  * to come back on line, in seconds.
  */
-#define MAX_WAIT_FOR_RECOVERY 15
+#define MAX_WAIT_FOR_RECOVERY 150
 
 struct pci_dn * handle_eeh_events (struct eeh_event *event)
 {
@@ -315,14 +314,14 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 
 	if (!frozen_dn) {
 
-		location = get_property(event->dn, "ibm,loc-code", NULL);
+		location = of_get_property(event->dn, "ibm,loc-code", NULL);
 		location = location ? location : "unknown";
 		printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
 		                "for location=%s pci addr=%s\n",
 		        location, pci_name(event->dev));
 		return NULL;
 	}
-	location = get_property(frozen_dn, "ibm,loc-code", NULL);
+	location = of_get_property(frozen_dn, "ibm,loc-code", NULL);
 	location = location ? location : "unknown";
 
 	/* There are two different styles for coming up with the PE.
@@ -341,13 +340,6 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 		return NULL;
 	}
 
-#if 0
-	/* We may get "permanent failure" messages on empty slots.
-	 * These are false alarms. Empty slots have no child dn. */
-	if ((event->state == pci_channel_io_perm_failure) && (frozen_device == NULL))
-		return;
-#endif
-
 	frozen_pdn = PCI_DN(frozen_dn);
 	frozen_pdn->eeh_freeze_count++;
 
@@ -362,13 +354,12 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
 		goto excess_failures;
 
-	/* If the reset state is a '5' and the time to reset is 0 (infinity)
-	 * or is more then 15 seconds, then mark this as a permanent failure.
-	 */
-	if ((event->state == pci_channel_io_perm_failure) &&
-	    ((event->time_unavail <= 0) ||
-	     (event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000)))
+	/* Get the current PCI slot state. */
+	rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000);
+	if (rc < 0) {
+		printk(KERN_WARNING "EEH: Permanent failure\n");
 		goto hard_fail;
+	}
 
 	eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
 	printk(KERN_WARNING
@@ -390,14 +381,18 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	 */
 	if (result == PCI_ERS_RESULT_NONE) {
 		rc = eeh_reset_device(frozen_pdn, frozen_bus);
-		if (rc)
+		if (rc) {
+			printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
 			goto hard_fail;
+		}
 	}
 
 	/* If all devices reported they can proceed, then re-enable MMIO */
 	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
 		rc = rtas_pci_enable(frozen_pdn, EEH_THAW_MMIO);
 
+		if (rc < 0)
+			goto hard_fail;
 		if (rc) {
 			result = PCI_ERS_RESULT_NEED_RESET;
 		} else {
@@ -410,6 +405,8 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
 		rc = rtas_pci_enable(frozen_pdn, EEH_THAW_DMA);
 
+		if (rc < 0)
+			goto hard_fail;
 		if (rc)
 			result = PCI_ERS_RESULT_NEED_RESET;
 		else
@@ -417,21 +414,28 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 	}
 
 	/* If any device has a hard failure, then shut off everything. */
-	if (result == PCI_ERS_RESULT_DISCONNECT)
+	if (result == PCI_ERS_RESULT_DISCONNECT) {
+		printk(KERN_WARNING "EEH: Device driver gave up\n");
 		goto hard_fail;
+	}
 
 	/* If any device called out for a reset, then reset the slot */
 	if (result == PCI_ERS_RESULT_NEED_RESET) {
 		rc = eeh_reset_device(frozen_pdn, NULL);
-		if (rc)
+		if (rc) {
+			printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
 			goto hard_fail;
+		}
 		result = PCI_ERS_RESULT_NONE;
 		pci_walk_bus(frozen_bus, eeh_report_reset, &result);
 	}
 
 	/* All devices should claim they have recovered by now. */
-	if (result != PCI_ERS_RESULT_RECOVERED)
+	if ((result != PCI_ERS_RESULT_RECOVERED) &&
+	    (result != PCI_ERS_RESULT_NONE)) {
+		printk(KERN_WARNING "EEH: Not recovered\n");
 		goto hard_fail;
+	}
 
 	/* Tell all device drivers that they can resume operations */
 	pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 49037edf7d39..ddb80f5d850b 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -118,9 +118,7 @@ static void eeh_thread_launcher(struct work_struct *dummy)
  * (from a workqueue).
  */
 int eeh_send_failure_event (struct device_node *dn,
-                            struct pci_dev *dev,
-                            enum pci_channel_state state,
-                            int time_unavail)
+                            struct pci_dev *dev)
 {
 	unsigned long flags;
 	struct eeh_event *event;
@@ -128,7 +126,7 @@ int eeh_send_failure_event (struct device_node *dn,
 
 	if (!mem_init_done) {
 		printk(KERN_ERR "EEH: event during early boot not handled\n");
-		location = get_property(dn, "ibm,loc-code", NULL);
+		location = of_get_property(dn, "ibm,loc-code", NULL);
 		printk(KERN_ERR "EEH: device node = %s\n", dn->full_name);
 		printk(KERN_ERR "EEH: PCI location = %s\n", location);
 		return 1;
@@ -144,8 +142,6 @@ int eeh_send_failure_event (struct device_node *dn,
 
 	event->dn = dn;
 	event->dev = dev;
-	event->state = state;
-	event->time_unavail = time_unavail;
 
 	/* We may or may not be called in an interrupt context */
 	spin_lock_irqsave(&eeh_eventlist_lock, flags);
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 90522e3c9d46..29bf83bfb1f0 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -80,7 +80,7 @@ void __init fw_feature_init(void)
 		goto out;
 	}
 
-	hypertas = get_property(dn, "ibm,hypertas-functions", &len);
+	hypertas = of_get_property(dn, "ibm,hypertas-functions", &len);
 	if (hypertas == NULL)
 		goto out;
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index f460b9cbfd46..9711eb0d5496 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -143,7 +143,7 @@ static int pseries_add_processor(struct device_node *np)
 	int err = -ENOSPC, len, nthreads, i;
 	const u32 *intserv;
 
-	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+	intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len);
 	if (!intserv)
 		return 0;
 
@@ -203,7 +203,7 @@ static void pseries_remove_processor(struct device_node *np)
 	int len, nthreads, i;
 	const u32 *intserv;
 
-	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+	intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len);
 	if (!intserv)
 		return;
 
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index 5c7e38789897..c1427b3634ec 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -30,9 +30,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_PURR);
 	
 /*
  * postcall is performed immediately before function return which
- * allows liberal use of volatile registers.
+ * allows liberal use of volatile registers.  We branch around this
+ * in early init (eg when populating the MMU hashtable) by using an
+ * unconditional cpu feature.
  */
 #define HCALL_INST_POSTCALL					\
+BEGIN_FTR_SECTION;						\
+	b	1f;						\
+END_FTR_SECTION(0, 1);						\
 	ld	r4,STK_PARM(r3)(r1);	/* validate opcode */	\
 	cmpldi	cr7,r4,MAX_HCALL_OPCODE;			\
 	bgt-	cr7,1f;						\
@@ -123,6 +128,40 @@ _GLOBAL(plpar_hcall)
 
 	blr				/* return r3 = status */
 
+/*
+ * plpar_hcall_raw can be called in real mode. kexec/kdump need some
+ * hypervisor calls to be executed in real mode. So plpar_hcall_raw
+ * does not access the per cpu hypervisor call statistics variables,
+ * since these variables may not be present in the RMO region.
+ */
+_GLOBAL(plpar_hcall_raw)
+	HMT_MEDIUM
+
+	mfcr	r0
+	stw	r0,8(r1)
+
+	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
+
+	mr	r4,r5
+	mr	r5,r6
+	mr	r6,r7
+	mr	r7,r8
+	mr	r8,r9
+	mr	r9,r10
+
+	HVSC				/* invoke the hypervisor */
+
+	ld	r12,STK_PARM(r4)(r1)
+	std	r4,  0(r12)
+	std	r5,  8(r12)
+	std	r6, 16(r12)
+	std	r7, 24(r12)
+
+	lwz	r0,8(r1)
+	mtcrf	0xff,r0
+
+	blr				/* return r3 = status */
+
 _GLOBAL(plpar_hcall9)
 	HMT_MEDIUM
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index e6653a868b91..66665c82415c 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -242,6 +242,7 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
 	return tce_ret;
 }
 
+#ifdef CONFIG_PCI
 static void iommu_table_setparms(struct pci_controller *phb,
 				 struct device_node *dn,
 				 struct iommu_table *tbl)
@@ -252,8 +253,8 @@ static void iommu_table_setparms(struct pci_controller *phb,
 
 	node = (struct device_node *)phb->arch_data;
 
-	basep = get_property(node, "linux,tce-base", NULL);
-	sizep = get_property(node, "linux,tce-size", NULL);
+	basep = of_get_property(node, "linux,tce-base", NULL);
+	sizep = of_get_property(node, "linux,tce-size", NULL);
 	if (basep == NULL || sizep == NULL) {
 		printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has "
 				"missing tce entries !\n", dn->full_name);
@@ -403,7 +404,7 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus)
 
 	/* Find nearest ibm,dma-window, walking up the device tree */
 	for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
-		dma_window = get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window != NULL)
 			break;
 	}
@@ -478,29 +479,6 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
 		       pci_name(dev));
 }
 
-static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
-	int err = NOTIFY_OK;
-	struct device_node *np = node;
-	struct pci_dn *pci = PCI_DN(np);
-
-	switch (action) {
-	case PSERIES_RECONFIG_REMOVE:
-		if (pci && pci->iommu_table &&
-		    get_property(np, "ibm,dma-window", NULL))
-			iommu_free_table(np);
-		break;
-	default:
-		err = NOTIFY_DONE;
-		break;
-	}
-	return err;
-}
-
-static struct notifier_block iommu_reconfig_nb = {
-	.notifier_call = iommu_reconfig_notifier,
-};
-
 static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 {
 	struct device_node *pdn, *dn;
@@ -521,7 +499,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 
 	for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
 	     pdn = pdn->parent) {
-		dma_window = get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = of_get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window)
 			break;
 	}
@@ -554,15 +532,44 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
 
 	dev->dev.archdata.dma_data = pci->iommu_table;
 }
+#else  /* CONFIG_PCI */
+#define pci_dma_bus_setup_pSeries	NULL
+#define pci_dma_dev_setup_pSeries	NULL
+#define pci_dma_bus_setup_pSeriesLP	NULL
+#define pci_dma_dev_setup_pSeriesLP	NULL
+#endif /* !CONFIG_PCI */
+
+static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node)
+{
+	int err = NOTIFY_OK;
+	struct device_node *np = node;
+	struct pci_dn *pci = PCI_DN(np);
+
+	switch (action) {
+	case PSERIES_RECONFIG_REMOVE:
+		if (pci && pci->iommu_table &&
+		    of_get_property(np, "ibm,dma-window", NULL))
+			iommu_free_table(np);
+		break;
+	default:
+		err = NOTIFY_DONE;
+		break;
+	}
+	return err;
+}
+
+static struct notifier_block iommu_reconfig_nb = {
+	.notifier_call = iommu_reconfig_notifier,
+};
 
 /* These are called very early. */
 void iommu_init_early_pSeries(void)
 {
-	if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) {
+	if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL)) {
 		/* Direct I/O, IOMMU off */
 		ppc_md.pci_dma_dev_setup = NULL;
 		ppc_md.pci_dma_bus_setup = NULL;
-		pci_dma_ops = &dma_direct_ops;
+		set_pci_dma_ops(&dma_direct_ops);
 		return;
 	}
 
@@ -588,6 +595,6 @@ void iommu_init_early_pSeries(void)
 
 	pSeries_reconfig_notifier_register(&iommu_reconfig_nb);
 
-	pci_dma_ops = &dma_iommu_ops;
+	set_pci_dma_ops(&dma_iommu_ops);
 }
 
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 7496005566ef..3a70e8ad7bc8 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -209,13 +209,13 @@ void __init find_udbg_vterm(void)
 	/* find the boot console from /chosen/stdout */
 	if (!of_chosen)
 		return;
-	name = get_property(of_chosen, "linux,stdout-path", NULL);
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
 	if (name == NULL)
 		return;
 	stdout_node = of_find_node_by_path(name);
 	if (!stdout_node)
 		return;
-	name = get_property(stdout_node, "name", NULL);
+	name = of_get_property(stdout_node, "name", NULL);
 	if (!name) {
 		printk(KERN_WARNING "stdout node missing 'name' property!\n");
 		goto out;
@@ -226,7 +226,7 @@ void __init find_udbg_vterm(void)
 	/* Check if it's a virtual terminal */
 	if (strncmp(name, "vty", 3) != 0)
 		goto out;
-	termno = get_property(stdout_node, "reg", NULL);
+	termno = of_get_property(stdout_node, "reg", NULL);
 	if (termno == NULL)
 		goto out;
 	vtermno = termno[0];
@@ -378,7 +378,7 @@ static void pSeries_lpar_hptab_clear(void)
 
 	/* TODO: Use bulk call */
 	for (i = 0; i < hpte_count; i++)
-		plpar_pte_remove(0, i, 0, &dummy1, &dummy2);
+		plpar_pte_remove_raw(0, i, 0, &dummy1, &dummy2);
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 64163cecdf93..f68903e15bd5 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -130,7 +130,7 @@ int __init pSeries_nvram_init(void)
 	if (nvram == NULL)
 		return -ENODEV;
 
-	nbytes_p = get_property(nvram, "#bytes", &proplen);
+	nbytes_p = of_get_property(nvram, "#bytes", &proplen);
 	if (nbytes_p == NULL || proplen != sizeof(unsigned int))
 		return -EIO;
 
diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c
index fa59124ce3fe..2c6ded29f73d 100644
--- a/arch/powerpc/platforms/pseries/pci.c
+++ b/arch/powerpc/platforms/pseries/pci.c
@@ -25,6 +25,7 @@
 #include <linux/pci.h>
 #include <linux/string.h>
 
+#include <asm/eeh.h>
 #include <asm/pci-bridge.h>
 #include <asm/prom.h>
 #include <asm/ppc-pci.h>
@@ -39,7 +40,7 @@ void pcibios_name_device(struct pci_dev *dev)
 	 */
 	dn = pci_device_to_OF_node(dev);
 	if (dn) {
-		char *loc_code = get_property(dn, "ibm,loc-code", 0);
+		const char *loc_code = of_get_property(dn, "ibm,loc-code", 0);
 		if (loc_code) {
 			int loc_len = strlen(loc_code);
 			if (loc_len < sizeof(dev->dev.name)) {
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index ac56b868913a..fdc1a369f767 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -29,6 +29,7 @@
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
+#include <asm/eeh.h>
 
 static struct pci_bus *
 find_bus_among_children(struct pci_bus *bus,
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index 3eb7b294d92f..2e4d10c9eea8 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -78,6 +78,22 @@ static inline long plpar_pte_remove(unsigned long flags, unsigned long ptex,
 	return rc;
 }
 
+/* plpar_pte_remove_raw can be called in real mode. It calls plpar_hcall_raw */
+static inline long plpar_pte_remove_raw(unsigned long flags, unsigned long ptex,
+		unsigned long avpn, unsigned long *old_pteh_ret,
+		unsigned long *old_ptel_ret)
+{
+	long rc;
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+	rc = plpar_hcall_raw(H_REMOVE, retbuf, flags, ptex, avpn);
+
+	*old_pteh_ret = retbuf[0];
+	*old_ptel_ret = retbuf[1];
+
+	return rc;
+}
+
 static inline long plpar_pte_read(unsigned long flags, unsigned long ptex,
 		unsigned long *old_pteh_ret, unsigned long *old_ptel_ret)
 {
diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c
new file mode 100644
index 000000000000..2624b71df73d
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/power.c
@@ -0,0 +1,87 @@
+/*
+ *  Interface for power-management for ppc64 compliant platform
+ *
+ *  Manish Ahuja <mahuja@us.ibm.com>
+ *
+ *  Feb 2007
+ *
+ *  Copyright (C) 2007 IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kobject.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+unsigned long rtas_poweron_auto; /* default and normal state is 0 */
+
+static ssize_t auto_poweron_show(struct subsystem *subsys, char *buf)
+{
+        return sprintf(buf, "%lu\n", rtas_poweron_auto);
+}
+
+static ssize_t
+auto_poweron_store(struct subsystem *subsys, const char *buf, size_t n)
+{
+	int ret;
+	unsigned long ups_restart;
+	ret = sscanf(buf, "%lu", &ups_restart);
+
+	if ((ret == 1) && ((ups_restart == 1) || (ups_restart == 0))){
+		rtas_poweron_auto = ups_restart;
+		return n;
+	}
+	return -EINVAL;
+}
+
+static struct subsys_attribute auto_poweron_attr = {
+        .attr   = {
+                .name = __stringify(auto_poweron),
+                .mode = 0644,
+        },
+        .show   = auto_poweron_show,
+        .store  = auto_poweron_store,
+};
+
+#ifndef CONFIG_PM
+decl_subsys(power,NULL,NULL);
+
+static struct attribute *g[] = {
+        &auto_poweron_attr.attr,
+        NULL,
+};
+
+static struct attribute_group attr_group = {
+        .attrs = g,
+};
+
+static int __init pm_init(void)
+{
+        int error = subsystem_register(&power_subsys);
+        if (!error)
+                error = sysfs_create_group(&power_subsys.kset.kobj,&attr_group);
+        return error;
+}
+core_initcall(pm_init);
+#else
+extern struct subsystem power_subsys;
+
+static int __init apo_pm_init(void)
+{
+	return (subsys_create_file(&power_subsys, &auto_poweron_attr));
+}
+__initcall(apo_pm_init);
+#endif
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index b43f1397a5b6..22bc01989749 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -29,8 +29,11 @@ static inline smp_init_pseries_xics(void) { };
 extern void setup_kexec_cpu_down_xics(void);
 extern void setup_kexec_cpu_down_mpic(void);
 #else
-static inline setup_kexec_cpu_down_xics(void) { };
-static inline setup_kexec_cpu_down_mpic(void) { };
+static inline void setup_kexec_cpu_down_xics(void) { }
+static inline void setup_kexec_cpu_down_mpic(void) { }
 #endif
 
+/* Poweron flag used for enabling auto ups restart */
+extern unsigned long rtas_poweron_auto;
+
 #endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index edc038873113..53aa04101ced 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -85,7 +85,7 @@ static void request_ras_irqs(struct device_node *np,
 	 * map those interrupts using the default interrupt host and default
 	 * trigger
 	 */
-	opicprop = get_property(np, "open-pic-interrupt", &opicplen);
+	opicprop = of_get_property(np, "open-pic-interrupt", &opicplen);
 	if (opicprop) {
 		opicplen /= sizeof(u32);
 		for (i = 0; i < opicplen; i++) {
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index 77d0937d5c07..9797b10b2935 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -363,7 +363,7 @@ static int get_eventscan_parms(void)
 
 	node = of_find_node_by_path("/rtas");
 
-	ip = get_property(node, "rtas-event-scan-rate", NULL);
+	ip = of_get_property(node, "rtas-event-scan-rate", NULL);
 	if (ip == NULL) {
 		printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n");
 		of_node_put(node);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 435a04596526..33eec2822c66 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -65,6 +65,7 @@
 #include <asm/udbg.h>
 #include <asm/smp.h>
 #include <asm/firmware.h>
+#include <asm/eeh.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -92,7 +93,7 @@ static void pSeries_show_cpuinfo(struct seq_file *m)
 
 	root = of_find_node_by_path("/");
 	if (root)
-		model = get_property(root, "model", NULL);
+		model = of_get_property(root, "model", NULL);
 	seq_printf(m, "machine\t\t: CHRP %s\n", model);
 	of_node_put(root);
 }
@@ -138,8 +139,8 @@ static void __init pseries_mpic_init_IRQ(void)
 	struct mpic *mpic;
 
 	np = of_find_node_by_path("/");
-	naddr = prom_n_addr_cells(np);
-	opprop = get_property(np, "platform-open-pic", &opplen);
+	naddr = of_n_addr_cells(np);
+	opprop = of_get_property(np, "platform-open-pic", &opplen);
 	if (opprop != 0) {
 		openpic_addr = of_read_number(opprop, naddr);
 		printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
@@ -188,11 +189,11 @@ static void __init pseries_mpic_init_IRQ(void)
 			break;
 		if (strcmp(np->name, "pci") != 0)
 			continue;
-		addrp = get_property(np, "8259-interrupt-acknowledge",
+		addrp = of_get_property(np, "8259-interrupt-acknowledge",
 					    NULL);
 		if (addrp == NULL)
 			continue;
-		naddr = prom_n_addr_cells(np);
+		naddr = of_n_addr_cells(np);
 		intack = addrp[naddr-1];
 		if (naddr > 1)
 			intack |= ((unsigned long)addrp[naddr-2]) << 32;
@@ -225,7 +226,7 @@ static void __init pseries_discover_pic(void)
 
 	for (np = NULL; (np = of_find_node_by_name(np,
 						   "interrupt-controller"));) {
-		typep = get_property(np, "compatible", NULL);
+		typep = of_get_property(np, "compatible", NULL);
 		if (strstr(typep, "open-pic")) {
 			pSeries_mpic_node = of_node_get(np);
 			ppc_md.init_IRQ       = pseries_mpic_init_IRQ;
@@ -334,32 +335,6 @@ static void __init pSeries_init_early(void)
 	DBG(" <- pSeries_init_early()\n");
 }
 
-
-static int pSeries_check_legacy_ioport(unsigned int baseport)
-{
-	struct device_node *np;
-
-#define I8042_DATA_REG	0x60
-#define FDC_BASE	0x3f0
-
-
-	switch(baseport) {
-	case I8042_DATA_REG:
-		np = of_find_node_by_type(NULL, "8042");
-		if (np == NULL)
-			return -ENODEV;
-		of_node_put(np);
-		break;
-	case FDC_BASE:
-		np = of_find_node_by_type(NULL, "fdc");
-		if (np == NULL)
-			return -ENODEV;
-		of_node_put(np);
-		break;
-	}
-	return 0;
-}
-
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
@@ -486,6 +461,38 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
 	return PCI_PROBE_NORMAL;
 }
 
+/**
+ * pSeries_power_off - tell firmware about how to power off the system.
+ *
+ * This function calls either the power-off rtas token in normal cases
+ * or the ibm,power-off-ups token (if present & requested) in case of
+ * a power failure. If power-off token is used, power on will only be
+ * possible with power button press. If ibm,power-off-ups token is used
+ * it will allow auto poweron after power is restored.
+ */
+void pSeries_power_off(void)
+{
+	int rc;
+	int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
+
+	if (rtas_flash_term_hook)
+		rtas_flash_term_hook(SYS_POWER_OFF);
+
+	if (rtas_poweron_auto == 0 ||
+		rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
+		rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
+		printk(KERN_INFO "RTAS power-off returned %d\n", rc);
+	} else {
+		rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
+		printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
+	}
+	for (;;);
+}
+
+#ifndef CONFIG_PCI
+void pSeries_final_fixup(void) { }
+#endif
+
 define_machine(pseries) {
 	.name			= "pSeries",
 	.probe			= pSeries_probe,
@@ -496,7 +503,7 @@ define_machine(pseries) {
 	.pcibios_fixup		= pSeries_final_fixup,
 	.pci_probe_mode		= pSeries_pci_probe_mode,
 	.restart		= rtas_restart,
-	.power_off		= rtas_power_off,
+	.power_off		= pSeries_power_off,
 	.halt			= rtas_halt,
 	.panic			= rtas_os_term,
 	.get_boot_time		= rtas_get_boot_time,
@@ -504,7 +511,6 @@ define_machine(pseries) {
 	.set_rtc_time		= rtas_set_rtc_time,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= rtas_progress,
-	.check_legacy_ioport	= pSeries_check_legacy_ioport,
 	.system_reset_exception = pSeries_system_reset_exception,
 	.machine_check_exception = pSeries_machine_check_exception,
 };
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index 81d172d65038..896cbf340c42 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -576,7 +576,7 @@ static void __init xics_init_one_node(struct device_node *np,
 	 * This happens to be the case so far but we are playing with fire...
 	 * should be fixed one of these days. -BenH.
 	 */
-	ireg = get_property(np, "ibm,interrupt-server-ranges", NULL);
+	ireg = of_get_property(np, "ibm,interrupt-server-ranges", NULL);
 
 	/* Do that ever happen ? we'll know soon enough... but even good'old
 	 * f80 does have that property ..
@@ -588,7 +588,7 @@ static void __init xics_init_one_node(struct device_node *np,
 		 */
 		*indx = *ireg;
 	}
-	ireg = get_property(np, "reg", &ilen);
+	ireg = of_get_property(np, "reg", &ilen);
 	if (!ireg)
 		panic("xics_init_IRQ: can't find interrupt reg property");
 
@@ -640,10 +640,10 @@ static void __init xics_setup_8259_cascade(void)
 			break;
 		if (strcmp(np->name, "pci") != 0)
 			continue;
-		addrp = get_property(np, "8259-interrupt-acknowledge", NULL);
+		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
 		if (addrp == NULL)
 			continue;
-		naddr = prom_n_addr_cells(np);
+		naddr = of_n_addr_cells(np);
 		intack = addrp[naddr-1];
 		if (naddr > 1)
 			intack |= ((unsigned long)addrp[naddr-2]) << 32;
@@ -664,10 +664,11 @@ static struct device_node *cpuid_to_of_node(int cpu)
 		int i, len;
 		const u32 *intserv;
 
-		intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+		intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
+					&len);
 
 		if (!intserv)
-			intserv = get_property(np, "reg", &len);
+			intserv = of_get_property(np, "reg", &len);
 
 		i = len / sizeof(u32);
 
@@ -709,7 +710,7 @@ void __init xics_init_IRQ(void)
 	/* Find the server numbers for the boot cpu. */
 	np = cpuid_to_of_node(boot_cpuid);
 	BUG_ON(!np);
-	ireg = get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
+	ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen);
 	if (!ireg)
 		goto skip_gserver_check;
 	i = ilen / sizeof(int);
@@ -725,7 +726,7 @@ void __init xics_init_IRQ(void)
 			default_server = hcpuid;
 			default_distrib_server = ireg[j+1];
 
-			isize = get_property(np,
+			isize = of_get_property(np,
 					"ibm,interrupt-server#-size", NULL);
 			if (isize)
 				interrupt_server_size = *isize;
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 85dcdf178415..e96ca9618dbb 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -7,15 +7,21 @@ obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
+obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_FSL_PCIE)		+= fsl_pcie.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 
+# contains only the suspend handler for time
+obj-$(CONFIG_PM)		+= timer.o
+
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
+obj-$(CONFIG_4xx)		+= uic.o
 endif
 
 # Temporary hack until we have migrated to asm-powerpc
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 1488535b0e13..336186dd7f10 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -333,7 +333,7 @@ void iommu_init_early_dart(void)
 		ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart;
 
 		/* Setup pci_dma ops */
-		pci_dma_ops = &dma_iommu_ops;
+		set_pci_dma_ops(&dma_iommu_ops);
 		return;
 	}
 
@@ -343,7 +343,7 @@ void iommu_init_early_dart(void)
 	ppc_md.pci_dma_bus_setup = NULL;
 
 	/* Setup pci_dma ops */
-	pci_dma_ops = &dma_direct_ops;
+	set_pci_dma_ops(&dma_direct_ops);
 }
 
 
diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
index dffeeaeca1d9..574b6ef44e0b 100644
--- a/arch/powerpc/sysdev/dcr.c
+++ b/arch/powerpc/sysdev/dcr.c
@@ -26,7 +26,7 @@
 unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
 {
 	unsigned int ds;
-	const u32 *dr = get_property(np, "dcr-reg", &ds);
+	const u32 *dr = of_get_property(np, "dcr-reg", &ds);
 
 	if (dr == NULL || ds & 1 || index >= (ds / 8))
 		return 0;
@@ -37,7 +37,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
 unsigned int dcr_resource_len(struct device_node *np, unsigned int index)
 {
 	unsigned int ds;
-	const u32 *dr = get_property(np, "dcr-reg", &ds);
+	const u32 *dr = of_get_property(np, "dcr-reg", &ds);
 
 	if (dr == NULL || ds & 1 || index >= (ds / 8))
 		return 0;
@@ -53,9 +53,9 @@ static struct device_node * find_dcr_parent(struct device_node * node)
 	const u32 *p;
 
 	for (par = of_node_get(node); par;) {
-		if (get_property(par, "dcr-controller", NULL))
+		if (of_get_property(par, "dcr-controller", NULL))
 			break;
-		p = get_property(par, "dcr-parent", NULL);
+		p = of_get_property(par, "dcr-parent", NULL);
 		tmp = par;
 		if (p == NULL)
 			par = of_get_parent(par);
@@ -80,13 +80,13 @@ u64 of_translate_dcr_address(struct device_node *dev,
 		return OF_BAD_ADDR;
 
 	/* Stride is not properly defined yet, default to 0x10 for Axon */
-	p = get_property(dp, "dcr-mmio-stride", NULL);
+	p = of_get_property(dp, "dcr-mmio-stride", NULL);
 	stride = (p == NULL) ? 0x10 : *p;
 
 	/* XXX FIXME: Which property name is to use of the 2 following ? */
-	p = get_property(dp, "dcr-mmio-range", NULL);
+	p = of_get_property(dp, "dcr-mmio-range", NULL);
 	if (p == NULL)
-		p = get_property(dp, "dcr-mmio-space", NULL);
+		p = of_get_property(dp, "dcr-mmio-space", NULL);
 	if (p == NULL)
 		return OF_BAD_ADDR;
 
@@ -129,7 +129,7 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_n, unsigned int dcr_c)
 
 	if (h.token == NULL)
 		return;
-	h.token -= dcr_n * h.stride;
+	h.token += dcr_n * h.stride;
 	iounmap(h.token);
 	h.token = NULL;
 }
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c b/arch/powerpc/sysdev/fsl_pcie.c
index a2f4f730213e..041c07e8b665 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c
+++ b/arch/powerpc/sysdev/fsl_pcie.c
@@ -24,8 +24,6 @@
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>
 
-#include "mpc86xx.h"
-
 #define PCI_CFG_OUT out_be32
 
 /* ERRATA PCI-Ex 14 PCIE Controller timeout */
diff --git a/arch/powerpc/sysdev/fsl_pcie.h b/arch/powerpc/sysdev/fsl_pcie.h
new file mode 100644
index 000000000000..8d9779c84bea
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pcie.h
@@ -0,0 +1,94 @@
+/*
+ * MPC85xx/86xx PCI Express structure define
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __POWERPC_FSL_PCIE_H
+#define __POWERPC_FSL_PCIE_H
+
+/* PCIE Express IO block registers in 85xx/86xx */
+
+struct ccsr_pex {
+	__be32 __iomem    pex_config_addr;	/* 0x.000 - PCI Express Configuration Address Register */
+	__be32 __iomem    pex_config_data;	/* 0x.004 - PCI Express Configuration Data Register */
+	u8 __iomem    res1[4];
+	__be32 __iomem    pex_otb_cpl_tor;	/* 0x.00c - PCI Express Outbound completion timeout register */
+	__be32 __iomem    pex_conf_tor;		/* 0x.010 - PCI Express configuration timeout register */
+	u8 __iomem    res2[12];
+	__be32 __iomem    pex_pme_mes_dr;	/* 0x.020 - PCI Express PME and message detect register */
+	__be32 __iomem    pex_pme_mes_disr;	/* 0x.024 - PCI Express PME and message disable register */
+	__be32 __iomem    pex_pme_mes_ier;	/* 0x.028 - PCI Express PME and message interrupt enable register */
+	__be32 __iomem    pex_pmcr;		/* 0x.02c - PCI Express power management command register */
+	u8 __iomem    res3[3024];
+	__be32 __iomem    pexotar0;		/* 0x.c00 - PCI Express outbound translation address register 0 */
+	__be32 __iomem    pexotear0;		/* 0x.c04 - PCI Express outbound translation extended address register 0*/
+	u8 __iomem    res4[8];
+	__be32 __iomem    pexowar0;		/* 0x.c10 - PCI Express outbound window attributes register 0*/
+	u8 __iomem    res5[12];
+	__be32 __iomem    pexotar1;		/* 0x.c20 - PCI Express outbound translation address register 1 */
+	__be32 __iomem    pexotear1;		/* 0x.c24 - PCI Express outbound translation extended address register 1*/
+	__be32 __iomem    pexowbar1;		/* 0x.c28 - PCI Express outbound window base address register 1*/
+	u8 __iomem    res6[4];
+	__be32 __iomem    pexowar1;		/* 0x.c30 - PCI Express outbound window attributes register 1*/
+	u8 __iomem    res7[12];
+	__be32 __iomem    pexotar2;		/* 0x.c40 - PCI Express outbound translation address register 2 */
+	__be32 __iomem    pexotear2;		/* 0x.c44 - PCI Express outbound translation extended address register 2*/
+	__be32 __iomem    pexowbar2;		/* 0x.c48 - PCI Express outbound window base address register 2*/
+	u8 __iomem    res8[4];
+	__be32 __iomem    pexowar2;		/* 0x.c50 - PCI Express outbound window attributes register 2*/
+	u8 __iomem    res9[12];
+	__be32 __iomem    pexotar3;		/* 0x.c60 - PCI Express outbound translation address register 3 */
+	__be32 __iomem    pexotear3;		/* 0x.c64 - PCI Express outbound translation extended address register 3*/
+	__be32 __iomem    pexowbar3;		/* 0x.c68 - PCI Express outbound window base address register 3*/
+	u8 __iomem    res10[4];
+	__be32 __iomem    pexowar3;		/* 0x.c70 - PCI Express outbound window attributes register 3*/
+	u8 __iomem    res11[12];
+	__be32 __iomem    pexotar4;		/* 0x.c80 - PCI Express outbound translation address register 4 */
+	__be32 __iomem    pexotear4;		/* 0x.c84 - PCI Express outbound translation extended address register 4*/
+	__be32 __iomem    pexowbar4;		/* 0x.c88 - PCI Express outbound window base address register 4*/
+	u8 __iomem    res12[4];
+	__be32 __iomem    pexowar4;		/* 0x.c90 - PCI Express outbound window attributes register 4*/
+	u8 __iomem    res13[12];
+	u8 __iomem    res14[256];
+	__be32 __iomem    pexitar3;		/* 0x.da0 - PCI Express inbound translation address register 3 */
+	u8 __iomem    res15[4];
+	__be32 __iomem    pexiwbar3;		/* 0x.da8 - PCI Express inbound window base address register 3 */
+	__be32 __iomem    pexiwbear3;		/* 0x.dac - PCI Express inbound window base extended address register 3 */
+	__be32 __iomem    pexiwar3;		/* 0x.db0 - PCI Express inbound window attributes register 3 */
+	u8 __iomem    res16[12];
+	__be32 __iomem    pexitar2;		/* 0x.dc0 - PCI Express inbound translation address register 2 */
+	u8 __iomem    res17[4];
+	__be32 __iomem    pexiwbar2;		/* 0x.dc8 - PCI Express inbound window base address register 2 */
+	__be32 __iomem    pexiwbear2;		/* 0x.dcc - PCI Express inbound window base extended address register 2 */
+	__be32 __iomem    pexiwar2;		/* 0x.dd0 - PCI Express inbound window attributes register 2 */
+	u8 __iomem    res18[12];
+	__be32 __iomem    pexitar1;		/* 0x.de0 - PCI Express inbound translation address register 2 */
+	u8 __iomem    res19[4];
+	__be32 __iomem    pexiwbar1;		/* 0x.de8 - PCI Express inbound window base address register 2 */
+	__be32 __iomem    pexiwbear1;		/* 0x.dec - PCI Express inbound window base extended address register 2 */
+	__be32 __iomem    pexiwar1;		/* 0x.df0 - PCI Express inbound window attributes register 2 */
+	u8 __iomem    res20[12];
+	__be32 __iomem    pex_err_dr;		/* 0x.e00 - PCI Express error detect register */
+	u8 __iomem    res21[4];
+	__be32 __iomem    pex_err_en;		/* 0x.e08 - PCI Express error interrupt enable register */
+	u8 __iomem    res22[4];
+	__be32 __iomem    pex_err_disr;		/* 0x.e10 - PCI Express error disable register */
+	u8 __iomem    res23[12];
+	__be32 __iomem    pex_err_cap_stat;	/* 0x.e20 - PCI Express error capture status register */
+	u8 __iomem    res24[4];
+	__be32 __iomem    pex_err_cap_r0;	/* 0x.e28 - PCI Express error capture register 0 */
+	__be32 __iomem    pex_err_cap_r1;	/* 0x.e2c - PCI Express error capture register 0 */
+	__be32 __iomem    pex_err_cap_r2;	/* 0x.e30 - PCI Express error capture register 0 */
+	__be32 __iomem    pex_err_cap_r3;	/* 0x.e34 - PCI Express error capture register 0 */
+};
+
+#endif /* __POWERPC_FSL_PCIE_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 34161bc5a02f..8a123c71449f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -52,7 +52,7 @@ phys_addr_t get_immrbase(void)
 	soc = of_find_node_by_type(NULL, "soc");
 	if (soc) {
 		unsigned int size;
-		const void *prop = get_property(soc, "reg", &size);
+		const void *prop = of_get_property(soc, "reg", &size);
 
 		if (prop)
 			immrbase = of_translate_address(soc, prop);
@@ -78,8 +78,8 @@ u32 get_brgfreq(void)
 	node = of_find_node_by_type(NULL, "cpm");
 	if (node) {
 		unsigned int size;
-		const unsigned int *prop = get_property(node, "brg-frequency",
-					&size);
+		const unsigned int *prop = of_get_property(node,
+					"brg-frequency", &size);
 
 		if (prop)
 			brgfreq = *prop;
@@ -103,8 +103,8 @@ u32 get_baudrate(void)
 	node = of_find_node_by_type(NULL, "serial");
 	if (node) {
 		unsigned int size;
-		const unsigned int *prop = get_property(node, "current-speed",
-				&size);
+		const unsigned int *prop = of_get_property(node,
+				"current-speed", &size);
 
 		if (prop)
 			fs_baudrate = *prop;
@@ -153,7 +153,8 @@ static int __init gfar_mdio_of_init(void)
 		while ((child = of_get_next_child(np, child)) != NULL) {
 			int irq = irq_of_parse_and_map(child, 0);
 			if (irq != NO_IRQ) {
-				const u32 *id = get_property(child, "reg", NULL);
+				const u32 *id = of_get_property(child,
+							"reg", NULL);
 				mdio_data.irq[*id] = irq;
 			}
 		}
@@ -209,7 +210,7 @@ static int __init gfar_of_init(void)
 
 		of_irq_to_resource(np, 0, &r[1]);
 
-		model = get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 
 		/* If we aren't the FEC we have multiple interrupts */
 		if (model && strcasecmp(model, "FEC")) {
@@ -233,14 +234,7 @@ static int __init gfar_of_init(void)
 			goto err;
 		}
 
-		mac_addr = get_property(np, "local-mac-address", NULL);
-		if (mac_addr == NULL)
-			mac_addr = get_property(np, "mac-address", NULL);
-		if (mac_addr == NULL) {
-			/* Obsolete */
-			mac_addr = get_property(np, "address", NULL);
-		}
-
+		mac_addr = of_get_mac_address(np);
 		if (mac_addr)
 			memcpy(gfar_data.mac_addr, mac_addr, 6);
 
@@ -260,7 +254,7 @@ static int __init gfar_of_init(void)
 			    FSL_GIANFAR_DEV_HAS_VLAN |
 			    FSL_GIANFAR_DEV_HAS_EXTENDED_HASH;
 
-		ph = get_property(np, "phy-handle", NULL);
+		ph = of_get_property(np, "phy-handle", NULL);
 		phy = of_find_node_by_phandle(*ph);
 
 		if (phy == NULL) {
@@ -270,7 +264,7 @@ static int __init gfar_of_init(void)
 
 		mdio = of_get_parent(phy);
 
-		id = get_property(phy, "reg", NULL);
+		id = of_get_property(phy, "reg", NULL);
 		ret = of_address_to_resource(mdio, 0, &res);
 		if (ret) {
 			of_node_put(phy);
@@ -332,11 +326,11 @@ static int __init fsl_i2c_of_init(void)
 		}
 
 		i2c_data.device_flags = 0;
-		flags = get_property(np, "dfsrr", NULL);
+		flags = of_get_property(np, "dfsrr", NULL);
 		if (flags)
 			i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
 
-		flags = get_property(np, "fsl5200-clocking", NULL);
+		flags = of_get_property(np, "fsl5200-clocking", NULL);
 		if (flags)
 			i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
 
@@ -381,7 +375,7 @@ static int __init mpc83xx_wdt_init(void)
 		goto nosoc;
 	}
 
-	freq = get_property(soc, "bus-frequency", NULL);
+	freq = of_get_property(soc, "bus-frequency", NULL);
 	if (!freq) {
 		ret = -ENODEV;
 		goto err;
@@ -473,15 +467,15 @@ static int __init fsl_usb_of_init(void)
 
 		usb_data.operating_mode = FSL_USB2_MPH_HOST;
 
-		prop = get_property(np, "port0", NULL);
+		prop = of_get_property(np, "port0", NULL);
 		if (prop)
 			usb_data.port_enables |= FSL_USB2_PORT0_ENABLED;
 
-		prop = get_property(np, "port1", NULL);
+		prop = of_get_property(np, "port1", NULL);
 		if (prop)
 			usb_data.port_enables |= FSL_USB2_PORT1_ENABLED;
 
-		prop = get_property(np, "phy_type", NULL);
+		prop = of_get_property(np, "phy_type", NULL);
 		usb_data.phy_mode = determine_usb_phy(prop);
 
 		ret =
@@ -508,7 +502,7 @@ static int __init fsl_usb_of_init(void)
 
 		of_irq_to_resource(np, 0, &r[1]);
 
-		prop = get_property(np, "dr_mode", NULL);
+		prop = of_get_property(np, "dr_mode", NULL);
 
 		if (!prop || !strcmp(prop, "host")) {
 			usb_data.operating_mode = FSL_USB2_DR_HOST;
@@ -545,7 +539,7 @@ static int __init fsl_usb_of_init(void)
 			goto err;
 		}
 
-		prop = get_property(np, "phy_type", NULL);
+		prop = of_get_property(np, "phy_type", NULL);
 		usb_data.phy_mode = determine_usb_phy(prop);
 
 		if (usb_dev_dr_host) {
@@ -640,16 +634,17 @@ static int __init fs_enet_of_init(void)
 			goto err;
 		}
 
-		model = get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 		if (model == NULL) {
 			ret = -ENODEV;
 			goto unreg;
 		}
 
-		mac_addr = get_property(np, "mac-address", NULL);
-		memcpy(fs_enet_data.macaddr, mac_addr, 6);
+		mac_addr = of_get_mac_address(np);
+		if (mac_addr)
+			memcpy(fs_enet_data.macaddr, mac_addr, 6);
 
-		ph = get_property(np, "phy-handle", NULL);
+		ph = of_get_property(np, "phy-handle", NULL);
 		phy = of_find_node_by_phandle(*ph);
 
 		if (phy == NULL) {
@@ -657,12 +652,12 @@ static int __init fs_enet_of_init(void)
 			goto unreg;
 		}
 
-		phy_addr = get_property(phy, "reg", NULL);
+		phy_addr = of_get_property(phy, "reg", NULL);
 		fs_enet_data.phy_addr = *phy_addr;
 
-		phy_irq = get_property(phy, "interrupts", NULL);
+		phy_irq = of_get_property(phy, "interrupts", NULL);
 
-		id = get_property(np, "device-id", NULL);
+		id = of_get_property(np, "device-id", NULL);
 		fs_enet_data.fs_no = *id;
 		strcpy(fs_enet_data.fs_type, model);
 
@@ -674,8 +669,10 @@ static int __init fs_enet_of_init(void)
                         goto unreg;
                 }
 
-		fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL));
-		fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL));
+		fs_enet_data.clk_rx = *((u32 *)of_get_property(np,
+						"rx-clock", NULL));
+		fs_enet_data.clk_tx = *((u32 *)of_get_property(np,
+						"tx-clock", NULL));
 
 		if (strstr(model, "FCC")) {
 			int fcc_index = *id - 1;
@@ -696,7 +693,7 @@ static int __init fs_enet_of_init(void)
 			fs_enet_data.bus_id = (char*)&bus_id[(*id)];
 			fs_enet_data.init_ioports = init_fcc_ioports;
 
-			mdio_bb_prop = get_property(phy, "bitbang", NULL);
+			mdio_bb_prop = of_get_property(phy, "bitbang", NULL);
 			if (mdio_bb_prop) {
 				struct platform_device *fs_enet_mdio_bb_dev;
 				struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
@@ -802,10 +799,10 @@ static int __init cpm_uart_of_init(void)
 			goto err;
 		}
 
-		id = get_property(np, "device-id", NULL);
+		id = of_get_property(np, "device-id", NULL);
 		cpm_uart_data.fs_no = *id;
 
-		model = (char*)get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 		strcpy(cpm_uart_data.fs_type, model);
 
 		cpm_uart_data.uart_clk = ppc_proc_freq;
@@ -814,8 +811,10 @@ static int __init cpm_uart_of_init(void)
 		cpm_uart_data.tx_buf_size = 32;
 		cpm_uart_data.rx_num_fifo = 4;
 		cpm_uart_data.rx_buf_size = 32;
-		cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL));
-		cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL));
+		cpm_uart_data.clk_rx = *((u32 *)of_get_property(np,
+						"rx-clock", NULL));
+		cpm_uart_data.clk_tx = *((u32 *)of_get_property(np,
+						"tx-clock", NULL));
 
 		ret =
 		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
@@ -839,7 +838,7 @@ arch_initcall(cpm_uart_of_init);
 #ifdef CONFIG_8xx
 
 extern void init_scc_ioports(struct fs_platform_info*);
-extern int platform_device_skip(char *model, int id);
+extern int platform_device_skip(const char *model, int id);
 
 static int __init fs_enet_mdio_of_init(void)
 {
@@ -906,21 +905,22 @@ static int __init fs_enet_of_init(void)
 		struct resource r[4];
 		struct device_node *phy = NULL, *mdio = NULL;
 		struct fs_platform_info fs_enet_data;
-		unsigned int *id, *phy_addr;
+		const unsigned int *id;
+		const unsigned int *phy_addr;
 		void *mac_addr;
-		phandle *ph;
-		char *model;
+		const phandle *ph;
+		const char *model;
 
 		memset(r, 0, sizeof(r));
 		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
 
-		model = (char *)get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 		if (model == NULL) {
 			ret = -ENODEV;
 			goto unreg;
 		}
 
-		id = (u32 *) get_property(np, "device-id", NULL);
+		id = of_get_property(np, "device-id", NULL);
 		fs_enet_data.fs_no = *id;
 
 		if (platform_device_skip(model, *id))
@@ -931,15 +931,16 @@ static int __init fs_enet_of_init(void)
 			goto err;
 		r[0].name = enet_regs;
 
-		mac_addr = (void *)get_property(np, "mac-address", NULL);
-		memcpy(fs_enet_data.macaddr, mac_addr, 6);
+		mac_addr = of_get_mac_address(np);
+		if (mac_addr)
+			memcpy(fs_enet_data.macaddr, mac_addr, 6);
 
-		ph = (phandle *) get_property(np, "phy-handle", NULL);
+		ph = of_get_property(np, "phy-handle", NULL);
 		if (ph != NULL)
 			phy = of_find_node_by_phandle(*ph);
 
 		if (phy != NULL) {
-			phy_addr = (u32 *) get_property(phy, "reg", NULL);
+			phy_addr = of_get_property(phy, "reg", NULL);
 			fs_enet_data.phy_addr = *phy_addr;
 			fs_enet_data.has_phy = 1;
 
@@ -952,7 +953,7 @@ static int __init fs_enet_of_init(void)
 			}
 		}
 
-		model = (char*)get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 		strcpy(fs_enet_data.fs_type, model);
 
 		if (strstr(model, "FEC")) {
@@ -1043,8 +1044,8 @@ static int __init cpm_smc_uart_of_init(void)
 	     i++) {
 		struct resource r[3];
 		struct fs_uart_platform_info cpm_uart_data;
-		int *id;
-		char *model;
+		const int *id;
+		const char *model;
 
 		memset(r, 0, sizeof(r));
 		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
@@ -1071,10 +1072,10 @@ static int __init cpm_smc_uart_of_init(void)
 			goto err;
 		}
 
-		model = (char*)get_property(np, "model", NULL);
+		model = of_get_property(np, "model", NULL);
 		strcpy(cpm_uart_data.fs_type, model);
 
-		id = (int*)get_property(np, "device-id", NULL);
+		id = of_get_property(np, "device-id", NULL);
 		cpm_uart_data.fs_no = *id;
 		cpm_uart_data.uart_clk = ppc_proc_freq;
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 4e54a09dd33b..0b84b7c775d8 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -304,7 +304,7 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic)
 	}
 }
 
-#ifdef CONFIG_MPIC_BROKEN_U3
+#ifdef CONFIG_MPIC_U3_HT_IRQS
 
 /* Test if an interrupt is sourced from HyperTransport (used on broken U3s)
  * to force the edge setting on the MPIC and do the ack workaround.
@@ -476,7 +476,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 	}
 }
 
-#else /* CONFIG_MPIC_BROKEN_U3 */
+#else /* CONFIG_MPIC_U3_HT_IRQS */
 
 static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source)
 {
@@ -487,7 +487,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic)
 {
 }
 
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 
 #define mpic_irq_to_hw(virq)	((unsigned int)irq_map[virq].hwirq)
@@ -615,7 +615,7 @@ static void mpic_end_irq(unsigned int irq)
 	mpic_eoi(mpic);
 }
 
-#ifdef CONFIG_MPIC_BROKEN_U3
+#ifdef CONFIG_MPIC_U3_HT_IRQS
 
 static void mpic_unmask_ht_irq(unsigned int irq)
 {
@@ -665,7 +665,7 @@ static void mpic_end_ht_irq(unsigned int irq)
 		mpic_ht_end_irq(mpic, src);
 	mpic_eoi(mpic);
 }
-#endif /* !CONFIG_MPIC_BROKEN_U3 */
+#endif /* !CONFIG_MPIC_U3_HT_IRQS */
 
 #ifdef CONFIG_SMP
 
@@ -788,7 +788,7 @@ static struct irq_chip mpic_ipi_chip = {
 };
 #endif /* CONFIG_SMP */
 
-#ifdef CONFIG_MPIC_BROKEN_U3
+#ifdef CONFIG_MPIC_U3_HT_IRQS
 static struct irq_chip mpic_irq_ht_chip = {
 	.startup	= mpic_startup_ht_irq,
 	.shutdown	= mpic_shutdown_ht_irq,
@@ -797,7 +797,7 @@ static struct irq_chip mpic_irq_ht_chip = {
 	.eoi		= mpic_end_ht_irq,
 	.set_type	= mpic_set_irq_type,
 };
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 
 static int mpic_host_match(struct irq_host *h, struct device_node *node)
@@ -837,11 +837,11 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq,
 	/* Default chip */
 	chip = &mpic->hc_irq;
 
-#ifdef CONFIG_MPIC_BROKEN_U3
+#ifdef CONFIG_MPIC_U3_HT_IRQS
 	/* Check for HT interrupts, override vecpri */
 	if (mpic_is_ht_interrupt(mpic, hw))
 		chip = &mpic->hc_ht_irq;
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 	DBG("mpic: mapping to irq chip @%p\n", chip);
 
@@ -937,12 +937,12 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->hc_irq.typename = name;
 	if (flags & MPIC_PRIMARY)
 		mpic->hc_irq.set_affinity = mpic_set_affinity;
-#ifdef CONFIG_MPIC_BROKEN_U3
+#ifdef CONFIG_MPIC_U3_HT_IRQS
 	mpic->hc_ht_irq = mpic_irq_ht_chip;
 	mpic->hc_ht_irq.typename = name;
 	if (flags & MPIC_PRIMARY)
 		mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
-#endif /* CONFIG_MPIC_BROKEN_U3 */
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
 
 #ifdef CONFIG_SMP
 	mpic->hc_ipi = mpic_ipi_chip;
@@ -970,7 +970,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->spurious_vec  = intvec_top;
 
 	/* Check for "big-endian" in device-tree */
-	if (node && get_property(node, "big-endian", NULL) != NULL)
+	if (node && of_get_property(node, "big-endian", NULL) != NULL)
 		mpic->flags |= MPIC_BIG_ENDIAN;
 
 
@@ -986,13 +986,13 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	BUG_ON(paddr == 0 && node == NULL);
 
 	/* If no physical address passed in, check if it's dcr based */
-	if (paddr == 0 && get_property(node, "dcr-reg", NULL) != NULL)
+	if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL)
 		mpic->flags |= MPIC_USES_DCR;
 
 #ifdef CONFIG_PPC_DCR
 	if (mpic->flags & MPIC_USES_DCR) {
 		const u32 *dbasep;
-		dbasep = get_property(node, "dcr-reg", NULL);
+		dbasep = of_get_property(node, "dcr-reg", NULL);
 		BUG_ON(dbasep == NULL);
 		mpic->dcr_base = *dbasep;
 		mpic->reg_type = mpic_access_dcr;
@@ -1006,7 +1006,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	 */
 	if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
 		const u32 *reg;
-		reg = get_property(node, "reg", NULL);
+		reg = of_get_property(node, "reg", NULL);
 		BUG_ON(reg == NULL);
 		paddr = of_translate_address(node, reg);
 		BUG_ON(paddr == OF_BAD_ADDR);
@@ -1142,7 +1142,7 @@ void __init mpic_init(struct mpic *mpic)
 
 	/* Do the HT PIC fixups on U3 broken mpic */
 	DBG("MPIC flags: %x\n", mpic->flags);
-	if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
+	if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY))
  		mpic_scan_ht_pics(mpic);
 
 	for (i = 0; i < mpic->num_sources; i++) {
@@ -1370,7 +1370,7 @@ void mpic_request_ipis(void)
 			printk(KERN_ERR "Failed to map IPI %d\n", i);
 			break;
 		}
-		request_irq(vipi, mpic_ipi_action, IRQF_DISABLED,
+		request_irq(vipi, mpic_ipi_action, IRQF_DISABLED|IRQF_PERCPU,
 			    ipi_names[i], mpic);
 	}
 }
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
new file mode 100644
index 000000000000..85a7c99c1003
--- /dev/null
+++ b/arch/powerpc/sysdev/pmi.c
@@ -0,0 +1,296 @@
+/*
+ * pmi driver
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * PMI (Platform Management Interrupt) is a way to communicate
+ * with the BMC (Baseboard Management Controller) via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include <asm/io.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+struct pmi_data {
+	struct list_head	handler;
+	spinlock_t		handler_spinlock;
+	spinlock_t		pmi_spinlock;
+	struct mutex		msg_mutex;
+	pmi_message_t		msg;
+	struct completion	*completion;
+	struct of_device	*dev;
+	int			irq;
+	u8 __iomem		*pmi_reg;
+	struct work_struct	work;
+};
+
+
+static int pmi_irq_handler(int irq, void *dev_id)
+{
+	struct pmi_data *data;
+	u8 type;
+	int rc;
+
+	data = dev_id;
+
+	spin_lock(&data->pmi_spinlock);
+
+	type = ioread8(data->pmi_reg + PMI_READ_TYPE);
+	pr_debug("pmi: got message of type %d\n", type);
+
+	if (type & PMI_ACK && !data->completion) {
+		printk(KERN_WARNING "pmi: got unexpected ACK message.\n");
+		rc = -EIO;
+		goto unlock;
+	}
+
+	if (data->completion && !(type & PMI_ACK)) {
+		printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type);
+		rc = -EIO;
+		goto unlock;
+	}
+
+	data->msg.type = type;
+	data->msg.data0 = ioread8(data->pmi_reg + PMI_READ_DATA0);
+	data->msg.data1 = ioread8(data->pmi_reg + PMI_READ_DATA1);
+	data->msg.data2 = ioread8(data->pmi_reg + PMI_READ_DATA2);
+	rc = 0;
+unlock:
+	spin_unlock(&data->pmi_spinlock);
+
+	if (rc == -EIO) {
+		rc = IRQ_HANDLED;
+		goto out;
+	}
+
+	if (data->msg.type & PMI_ACK) {
+		complete(data->completion);
+		rc = IRQ_HANDLED;
+		goto out;
+	}
+
+	schedule_work(&data->work);
+
+	rc = IRQ_HANDLED;
+out:
+	return rc;
+}
+
+
+static struct of_device_id pmi_match[] = {
+	{ .type = "ibm,pmi", .name = "ibm,pmi" },
+	{ .type = "ibm,pmi" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, pmi_match);
+
+static void pmi_notify_handlers(struct work_struct *work)
+{
+	struct pmi_data *data;
+	struct pmi_handler *handler;
+
+	data = container_of(work, struct pmi_data, work);
+
+	spin_lock(&data->handler_spinlock);
+	list_for_each_entry(handler, &data->handler, node) {
+		pr_debug(KERN_INFO "pmi: notifying handler %p\n", handler);
+		if (handler->type == data->msg.type)
+			handler->handle_pmi_message(data->dev, data->msg);
+	}
+	spin_unlock(&data->handler_spinlock);
+}
+
+static int pmi_of_probe(struct of_device *dev,
+			const struct of_device_id *match)
+{
+	struct device_node *np = dev->node;
+	struct pmi_data *data;
+	int rc;
+
+	data = kzalloc(sizeof(struct pmi_data), GFP_KERNEL);
+	if (!data) {
+		printk(KERN_ERR "pmi: could not allocate memory.\n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	data->pmi_reg = of_iomap(np, 0);
+	if (!data->pmi_reg) {
+		printk(KERN_ERR "pmi: invalid register address.\n");
+		rc = -EFAULT;
+		goto error_cleanup_data;
+	}
+
+	INIT_LIST_HEAD(&data->handler);
+
+	mutex_init(&data->msg_mutex);
+	spin_lock_init(&data->pmi_spinlock);
+	spin_lock_init(&data->handler_spinlock);
+
+	INIT_WORK(&data->work, pmi_notify_handlers);
+
+	dev->dev.driver_data = data;
+	data->dev = dev;
+
+	data->irq = irq_of_parse_and_map(np, 0);
+	if (data->irq == NO_IRQ) {
+		printk(KERN_ERR "pmi: invalid interrupt.\n");
+		rc = -EFAULT;
+		goto error_cleanup_iomap;
+	}
+
+	rc = request_irq(data->irq, pmi_irq_handler, 0, "pmi", data);
+	if (rc) {
+		printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n",
+				data->irq, rc);
+		goto error_cleanup_iomap;
+	}
+
+	printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg);
+
+	goto out;
+
+error_cleanup_iomap:
+	iounmap(data->pmi_reg);
+
+error_cleanup_data:
+	kfree(data);
+
+out:
+	return rc;
+}
+
+static int pmi_of_remove(struct of_device *dev)
+{
+	struct pmi_data *data;
+	struct pmi_handler *handler, *tmp;
+
+	data = dev->dev.driver_data;
+
+	free_irq(data->irq, data);
+	iounmap(data->pmi_reg);
+
+	spin_lock(&data->handler_spinlock);
+
+	list_for_each_entry_safe(handler, tmp, &data->handler, node)
+		list_del(&handler->node);
+
+	spin_unlock(&data->handler_spinlock);
+
+	kfree(dev->dev.driver_data);
+
+	return 0;
+}
+
+static struct of_platform_driver pmi_of_platform_driver = {
+	.name		= "pmi",
+	.match_table	= pmi_match,
+	.probe		= pmi_of_probe,
+	.remove		= pmi_of_remove
+};
+
+static int __init pmi_module_init(void)
+{
+	return of_register_platform_driver(&pmi_of_platform_driver);
+}
+module_init(pmi_module_init);
+
+static void __exit pmi_module_exit(void)
+{
+	of_unregister_platform_driver(&pmi_of_platform_driver);
+}
+module_exit(pmi_module_exit);
+
+void pmi_send_message(struct of_device *device, pmi_message_t msg)
+{
+	struct pmi_data *data;
+	unsigned long flags;
+	DECLARE_COMPLETION_ONSTACK(completion);
+
+	data = device->dev.driver_data;
+
+	mutex_lock(&data->msg_mutex);
+
+	data->msg = msg;
+	pr_debug("pmi_send_message: msg is %08x\n", *(u32*)&msg);
+
+	data->completion = &completion;
+
+	spin_lock_irqsave(&data->pmi_spinlock, flags);
+	iowrite8(msg.data0, data->pmi_reg + PMI_WRITE_DATA0);
+	iowrite8(msg.data1, data->pmi_reg + PMI_WRITE_DATA1);
+	iowrite8(msg.data2, data->pmi_reg + PMI_WRITE_DATA2);
+	iowrite8(msg.type, data->pmi_reg + PMI_WRITE_TYPE);
+	spin_unlock_irqrestore(&data->pmi_spinlock, flags);
+
+	pr_debug("pmi_send_message: wait for completion\n");
+
+	wait_for_completion_interruptible_timeout(data->completion,
+						  PMI_TIMEOUT);
+
+	data->completion = NULL;
+
+	mutex_unlock(&data->msg_mutex);
+}
+EXPORT_SYMBOL_GPL(pmi_send_message);
+
+void pmi_register_handler(struct of_device *device,
+			  struct pmi_handler *handler)
+{
+	struct pmi_data *data;
+	data = device->dev.driver_data;
+
+	if (!data)
+		return;
+
+	spin_lock(&data->handler_spinlock);
+	list_add_tail(&handler->node, &data->handler);
+	spin_unlock(&data->handler_spinlock);
+}
+EXPORT_SYMBOL_GPL(pmi_register_handler);
+
+void pmi_unregister_handler(struct of_device *device,
+			    struct pmi_handler *handler)
+{
+	struct pmi_data *data;
+	data = device->dev.driver_data;
+
+	if (!data)
+		return;
+
+	pr_debug("pmi: unregistering handler %p\n", handler);
+
+	spin_lock(&data->handler_spinlock);
+	list_del(&handler->node);
+	spin_unlock(&data->handler_spinlock);
+}
+EXPORT_SYMBOL_GPL(pmi_unregister_handler);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+MODULE_DESCRIPTION("IBM Platform Management Interrupt driver");
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index a725e80befa8..887739f3badc 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -2,11 +2,8 @@
 # QE Communication options
 #
 
-menu "QE Options"
-	depends on QUICC_ENGINE
-
 config UCC_SLOW
-	bool "UCC Slow Protocols Support"
+	bool
 	default n
 	select UCC
 	help
@@ -14,10 +11,9 @@ config UCC_SLOW
 	  protocols: UART, BISYNC, QMC
 
 config UCC_FAST
-	bool "UCC Fast Protocols Support"
+	bool
 	default n
 	select UCC
-	select UCC_SLOW
 	help
 	  This option provides qe_lib support to UCC fast
 	  protocols: HDLC, Ethernet, ATM, transparent
@@ -26,5 +22,3 @@ config UCC
 	bool
 	default y if UCC_FAST || UCC_SLOW
 
-endmenu
-
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index e3d71e083f35..7f4c07543961 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -71,7 +71,7 @@ phys_addr_t get_qe_base(void)
 	qe = of_find_node_by_type(NULL, "qe");
 	if (qe) {
 		unsigned int size;
-		const void *prop = get_property(qe, "reg", &size);
+		const void *prop = of_get_property(qe, "reg", &size);
 		qebase = of_translate_address(qe, prop);
 		of_node_put(qe);
 	};
@@ -158,7 +158,7 @@ unsigned int get_brg_clk(void)
 	qe = of_find_node_by_type(NULL, "qe");
 	if (qe) {
 		unsigned int size;
-		const u32 *prop = get_property(qe, "brg-frequency", &size);
+		const u32 *prop = of_get_property(qe, "brg-frequency", &size);
 		brg_clk = *prop;
 		of_node_put(qe);
 	};
@@ -251,13 +251,13 @@ static int qe_sdma_init(void)
 
 	/* allocate 2 internal temporary buffers (512 bytes size each) for
 	 * the SDMA */
-	sdma_buf_offset = qe_muram_alloc(512 * 2, 64);
+ 	sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
 	if (IS_MURAM_ERR(sdma_buf_offset))
 		return -ENOMEM;
 
 	out_be32(&sdma->sdebcr, sdma_buf_offset & QE_SDEBCR_BA_MASK);
-	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | (0x1 >>
-					QE_SDMR_CEN_SHIFT)));
+ 	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
+ 					(0x1 << QE_SDMR_CEN_SHIFT)));
 
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index 0afe6bfe3714..e32b45bf9ff5 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -53,7 +53,7 @@ int par_io_init(struct device_node *np)
 		return ret;
 	par_io = ioremap(res.start, res.end - res.start + 1);
 
-	num_ports = get_property(np, "num-ports", NULL);
+	num_ports = of_get_property(np, "num-ports", NULL);
 	if (num_ports)
 		num_par_io_ports = *num_ports;
 
@@ -161,7 +161,7 @@ int par_io_of_config(struct device_node *np)
 		return -1;
 	}
 
-	ph = get_property(np, "pio-handle", NULL);
+	ph = of_get_property(np, "pio-handle", NULL);
 	if (ph == 0) {
 		printk(KERN_ERR "pio-handle not available \n");
 		return -1;
@@ -169,7 +169,7 @@ int par_io_of_config(struct device_node *np)
 
 	pio = of_find_node_by_phandle(*ph);
 
-	pio_map = get_property(pio, "pio-map", &pio_map_len);
+	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
 	if (pio_map == NULL) {
 		printk(KERN_ERR "pio-map is not set! \n");
 		return -1;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index e657559bea93..66137bf2dfb0 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -1,13 +1,12 @@
 /*
- * arch/powerpc/sysdev/qe_lib/ucc_fast.c
- *
- * QE UCC Fast API Set - UCC Fast specific routines implementations.
- *
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
  * 		Li Yang <leoli@freescale.com>
  *
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -27,79 +26,61 @@
 #include <asm/ucc.h>
 #include <asm/ucc_fast.h>
 
-#define uccf_printk(level, format, arg...) \
-	printk(level format "\n", ## arg)
-
-#define uccf_dbg(format, arg...) \
-	uccf_printk(KERN_DEBUG , format , ## arg)
-#define uccf_err(format, arg...) \
-	uccf_printk(KERN_ERR , format , ## arg)
-#define uccf_info(format, arg...) \
-	uccf_printk(KERN_INFO , format , ## arg)
-#define uccf_warn(format, arg...) \
-	uccf_printk(KERN_WARNING , format , ## arg)
-
-#ifdef UCCF_VERBOSE_DEBUG
-#define uccf_vdbg uccf_dbg
-#else
-#define uccf_vdbg(fmt, args...) do { } while (0)
-#endif				/* UCCF_VERBOSE_DEBUG */
-
 void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 {
-	uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
-	uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+	printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
+	printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
 
-	uccf_info("gumr  : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "gumr  : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
-	uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
-	uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
-	uccf_info("udsr  : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "udsr  : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
-	uccf_info("ucce  : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "ucce  : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
-	uccf_info("uccm  : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "uccm  : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
-	uccf_info("uccs  : addr - 0x%08x, val - 0x%02x",
+	printk(KERN_INFO "uccs  : addr - 0x%08x, val - 0x%02x",
 		  (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
-	uccf_info("urfb  : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "urfb  : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
-	uccf_info("urfs  : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "urfs  : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
-	uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
-	uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->urfset,
 		  in_be16(&uccf->uf_regs->urfset));
-	uccf_info("utfb  : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "utfb  : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
-	uccf_info("utfs  : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "utfs  : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
-	uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
-	uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
-	uccf_info("utpt  : addr - 0x%08x, val - 0x%04x",
+	printk(KERN_INFO "utpt  : addr - 0x%08x, val - 0x%04x",
 		  (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
-	uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+	printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
 		  (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
-	uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+	printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
 		  (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
 }
 
 u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
 {
 	switch (uccf_num) {
-	case 0:	return QE_CR_SUBBLOCK_UCCFAST1;
+	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
 	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
 	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
 	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
 	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
 	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
 	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
-	case 7:	return QE_CR_SUBBLOCK_UCCFAST8;
+	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
 	default: return QE_CR_SUBBLOCK_INVALID;
 	}
 }
@@ -153,84 +134,72 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 {
 	struct ucc_fast_private *uccf;
 	struct ucc_fast *uf_regs;
-	u32 gumr = 0;
+	u32 gumr;
 	int ret;
 
-	uccf_vdbg("%s: IN", __FUNCTION__);
-
 	if (!uf_info)
 		return -EINVAL;
 
 	/* check if the UCC port number is in range. */
 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		uccf_err("ucc_fast_init: Illegal UCC number!");
+		printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
-		uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+		printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	/* Validate Virtual Fifo register values */
 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		uccf_err
-		    ("ucc_fast_init: Virtual Fifo register urfs too small.");
+		printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		uccf_err
-		    ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+		printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		uccf_err
-		    ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+		printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		uccf_err
-		   ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+		printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		uccf_err
-		    ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+		printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		uccf_err
-		    ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+		printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		uccf_err
-		    ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+		printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
 	if (!uccf) {
-		uccf_err
-		    ("ucc_fast_init: No memory for UCC slow data structure!");
+		printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
 		return -ENOMEM;
 	}
 
 	/* Fill fast UCC structure */
 	uccf->uf_info = uf_info;
 	/* Set the PHY base address */
-	uccf->uf_regs =
-	    (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
+	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
-		uccf_err
-		    ("ucc_fast_init: No memory map for UCC slow controller!");
+		printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
 		return -ENOMEM;
 	}
 
@@ -241,6 +210,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uf_regs = uccf->uf_regs;
 	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
 	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+#endif
 #ifdef STATISTICS
 	uccf->tx_frames = 0;
 	uccf->rx_frames = 0;
@@ -249,7 +221,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
 	/* Init Guemr register */
 	if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
-		uccf_err("ucc_fast_init: Could not init the guemr register.");
+		printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
 		ucc_fast_free(uccf);
 		return ret;
 	}
@@ -258,7 +230,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	if ((ret = ucc_set_type(uf_info->ucc_num,
 				(struct ucc_common *) (uf_regs),
 				UCC_SPEED_TYPE_FAST))) {
-		uccf_err("ucc_fast_init: Could not set type to fast.");
+		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
 		ucc_fast_free(uccf);
 		return ret;
 	}
@@ -267,10 +239,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
 	/* Set GUMR */
 	/* For more details see the hardware spec. */
-	/* gumr starts as zero. */
+	gumr = uf_info->ttx_trx;
 	if (uf_info->tci)
 		gumr |= UCC_FAST_GUMR_TCI;
-	gumr |= uf_info->ttx_trx;
 	if (uf_info->cdp)
 		gumr |= UCC_FAST_GUMR_CDP;
 	if (uf_info->ctsp)
@@ -298,9 +269,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->ucc_fast_tx_virtual_fifo_base_offset =
 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
-		uccf_err
-		    ("ucc_fast_init: Can not allocate MURAM memory for "
-			"struct ucc_fastx_virtual_fifo_base_offset.");
+		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -308,14 +277,11 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
 	/* Allocate memory for Rx Virtual Fifo */
 	uccf->ucc_fast_rx_virtual_fifo_base_offset =
-	    qe_muram_alloc(uf_info->urfs +
-			   (u32)
+		qe_muram_alloc(uf_info->urfs +
 			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
-		uccf_err
-		    ("ucc_fast_init: Can not allocate MURAM memory for "
-			"ucc_fast_rx_virtual_fifo_base_offset.");
+		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -342,26 +308,22 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	/* If NMSI (not Tsa), set Tx and Rx clock. */
 	if (!uf_info->tsa) {
 		/* Rx clock routing */
-		if (uf_info->rx_clock != QE_CLK_NONE) {
-			if (ucc_set_qe_mux_rxtx
-			    (uf_info->ucc_num, uf_info->rx_clock,
-			     COMM_DIR_RX)) {
-				uccf_err
-		("ucc_fast_init: Illegal value for parameter 'RxClock'.");
-				ucc_fast_free(uccf);
-				return -EINVAL;
-			}
+		if ((uf_info->rx_clock != QE_CLK_NONE) &&
+		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+					COMM_DIR_RX)) {
+			printk(KERN_ERR "%s: illegal value for RX clock",
+			       __FUNCTION__);
+			ucc_fast_free(uccf);
+			return -EINVAL;
 		}
 		/* Tx clock routing */
-		if (uf_info->tx_clock != QE_CLK_NONE) {
-			if (ucc_set_qe_mux_rxtx
-			    (uf_info->ucc_num, uf_info->tx_clock,
-			     COMM_DIR_TX)) {
-				uccf_err
-		("ucc_fast_init: Illegal value for parameter 'TxClock'.");
-				ucc_fast_free(uccf);
-				return -EINVAL;
-			}
+		if ((uf_info->tx_clock != QE_CLK_NONE) &&
+		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+					COMM_DIR_TX)) {
+			printk(KERN_ERR "%s: illegal value for TX clock",
+			       __FUNCTION__);
+			ucc_fast_free(uccf);
+			return -EINVAL;
 		}
 	}
 
@@ -370,9 +332,9 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
 	/* First, clear anything pending at UCC level,
 	 * otherwise, old garbage may come through
-	 * as soon as the dam is opened
-	 * Writing '1' clears
-	 */
+	 * as soon as the dam is opened. */
+
+	/* Writing '1' clears */
 	out_be32(&uf_regs->ucce, 0xffffffff);
 
 	*uccf_ret = uccf;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 0e97e5c94f8a..b930d686a4d1 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -19,7 +19,6 @@
 #include <linux/stddef.h>
 #include <linux/interrupt.h>
 
-#include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/immap_qe.h>
 #include <asm/qe.h>
@@ -27,24 +26,6 @@
 #include <asm/ucc.h>
 #include <asm/ucc_slow.h>
 
-#define uccs_printk(level, format, arg...) \
-        printk(level format "\n", ## arg)
-
-#define uccs_dbg(format, arg...) \
-	uccs_printk(KERN_DEBUG , format , ## arg)
-#define uccs_err(format, arg...) \
-	uccs_printk(KERN_ERR , format , ## arg)
-#define uccs_info(format, arg...) \
-	uccs_printk(KERN_INFO , format , ## arg)
-#define uccs_warn(format, arg...) \
-	uccs_printk(KERN_WARNING , format , ## arg)
-
-#ifdef UCCS_VERBOSE_DEBUG
-#define uccs_vdbg uccs_dbg
-#else
-#define uccs_vdbg(fmt, args...) do { } while (0)
-#endif				/* UCCS_VERBOSE_DEBUG */
-
 u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
 {
 	switch (uccs_num) {
@@ -135,51 +116,53 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
 
 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
 {
+	struct ucc_slow_private *uccs;
 	u32 i;
 	struct ucc_slow *us_regs;
 	u32 gumr;
-	u8 function_code = 0;
-	u8 *bd;
-	struct ucc_slow_private *uccs;
+	struct qe_bd *bd;
 	u32 id;
 	u32 command;
-	int ret;
-
-	uccs_vdbg("%s: IN", __FUNCTION__);
+	int ret = 0;
 
 	if (!us_info)
 		return -EINVAL;
 
 	/* check if the UCC port number is in range. */
 	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-		uccs_err("ucc_slow_init: Illegal UCC number!");
+		printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
 		return -EINVAL;
 	}
 
 	/*
 	 * Set mrblr
 	 * Check that 'max_rx_buf_length' is properly aligned (4), unless
- 	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
 	 * case when QE accepts 32 bits at a time.
 	 */
 	if ((!us_info->rfw) &&
 		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
-		uccs_err("max_rx_buf_length not aligned.");
+		printk(KERN_ERR "max_rx_buf_length not aligned.");
 		return -EINVAL;
 	}
 
 	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
 	if (!uccs) {
-		uccs_err
-		    ("ucc_slow_init: No memory for UCC slow data structure!");
+		printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
 		return -ENOMEM;
 	}
 
 	/* Fill slow UCC structure */
 	uccs->us_info = us_info;
+	/* Set the PHY base address */
+	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+	if (uccs->us_regs == NULL) {
+		printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+		return -ENOMEM;
+	}
+
 	uccs->saved_uccm = 0;
 	uccs->p_rx_frame = 0;
-	uccs->us_regs = us_info->regs;
 	us_regs = uccs->us_regs;
 	uccs->p_ucce = (u16 *) & (us_regs->ucce);
 	uccs->p_uccm = (u16 *) & (us_regs->uccm);
@@ -190,33 +173,31 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 #endif				/* STATISTICS */
 
 	/* Get PRAM base */
-	uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
-						 ALIGNMENT_OF_UCC_SLOW_PRAM);
+	uccs->us_pram_offset =
+		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
 	if (IS_MURAM_ERR(uccs->us_pram_offset)) {
-		uccs_err
-		    ("ucc_slow_init: Can not allocate MURAM memory "
-			"for Slow UCC.");
+		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return -ENOMEM;
 	}
 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
 	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
-			(u32) uccs->us_pram_offset);
+		     uccs->us_pram_offset);
 
 	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
 
 	/* Init Guemr register */
-	if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
-		uccs_err("ucc_slow_init: Could not init the guemr register.");
+	if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
+		printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return ret;
 	}
 
 	/* Set UCC to slow type */
 	if ((ret = ucc_set_type(us_info->ucc_num,
-				(struct ucc_common *) (us_info->regs),
+				(struct ucc_common *) us_regs,
 				UCC_SPEED_TYPE_SLOW))) {
-		uccs_err("ucc_slow_init: Could not init the guemr register.");
+		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return ret;
 	}
@@ -230,7 +211,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
 				QE_ALIGNMENT_OF_BD);
 	if (IS_MURAM_ERR(uccs->rx_base_offset)) {
-		uccs_err("ucc_slow_init: No memory for Rx BD's.");
+		printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
 		uccs->rx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
@@ -240,7 +221,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
 			QE_ALIGNMENT_OF_BD);
 	if (IS_MURAM_ERR(uccs->tx_base_offset)) {
-		uccs_err("ucc_slow_init: No memory for Tx BD's.");
+		printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
 		uccs->tx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
@@ -248,34 +229,33 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
 	/* Init Tx bds */
 	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
-	for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+	for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
 		/* clear bd buffer */
-		out_be32(&(((struct qe_bd *)bd)->buf), 0);
+		out_be32(&bd->buf, 0);
 		/* set bd status and length */
-		out_be32((u32*)bd, 0);
-		bd += sizeof(struct qe_bd);
+		out_be32((u32 *) bd, 0);
+		bd++;
 	}
-	bd -= sizeof(struct qe_bd);
-	/* set bd status and length */
-	out_be32((u32*)bd, T_W);	/* for last BD set Wrap bit */
+	/* for last BD set Wrap bit */
+	out_be32(&bd->buf, 0);
+	out_be32((u32 *) bd, cpu_to_be32(T_W));
 
 	/* Init Rx bds */
 	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
-	for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
 		/* set bd status and length */
 		out_be32((u32*)bd, 0);
 		/* clear bd buffer */
-		out_be32(&(((struct qe_bd *)bd)->buf), 0);
-		bd += sizeof(struct qe_bd);
+		out_be32(&bd->buf, 0);
+		bd++;
 	}
-	bd -= sizeof(struct qe_bd);
-	/* set bd status and length */
-	out_be32((u32*)bd, R_W);	/* for last BD set Wrap bit */
+	/* for last BD set Wrap bit */
+	out_be32((u32*)bd, cpu_to_be32(R_W));
+	out_be32(&bd->buf, 0);
 
 	/* Set GUMR (For more details see the hardware spec.). */
 	/* gumr_h */
-	gumr = 0;
-	gumr |= us_info->tcrc;
+	gumr = us_info->tcrc;
 	if (us_info->cdp)
 		gumr |= UCC_SLOW_GUMR_H_CDP;
 	if (us_info->ctsp)
@@ -295,7 +275,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	out_be32(&us_regs->gumr_h, gumr);
 
 	/* gumr_l */
-	gumr = 0;
+	gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
+		us_info->diag | us_info->mode;
 	if (us_info->tci)
 		gumr |= UCC_SLOW_GUMR_L_TCI;
 	if (us_info->rinv)
@@ -304,23 +285,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		gumr |= UCC_SLOW_GUMR_L_TINV;
 	if (us_info->tend)
 		gumr |= UCC_SLOW_GUMR_L_TEND;
-	gumr |= us_info->tdcr;
-	gumr |= us_info->rdcr;
-	gumr |= us_info->tenc;
-	gumr |= us_info->renc;
-	gumr |= us_info->diag;
-	gumr |= us_info->mode;
 	out_be32(&us_regs->gumr_l, gumr);
 
 	/* Function code registers */
-	/* function_code has initial value 0 */
 
 	/* if the data is in cachable memory, the 'global' */
 	/* in the function code should be set. */
-	function_code |= us_info->data_mem_part;
-	function_code |= QE_BMR_BYTE_ORDER_BO_MOT;	/* Required for QE */
-	uccs->us_pram->tfcr = function_code;
-	uccs->us_pram->rfcr = function_code;
+	uccs->us_pram->tfcr = uccs->us_pram->rfcr =
+		us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
 
 	/* rbase, tbase are offsets from MURAM base */
 	out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
@@ -336,34 +308,29 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	/* If NMSI (not Tsa), set Tx and Rx clock. */
 	if (!us_info->tsa) {
 		/* Rx clock routing */
-		if (ucc_set_qe_mux_rxtx
-		    (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
-			uccs_err
-			    ("ucc_slow_init: Illegal value for parameter"
-				" 'RxClock'.");
+		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+					COMM_DIR_RX)) {
+			printk(KERN_ERR "%s: illegal value for RX clock",
+			       __FUNCTION__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
 		/* Tx clock routing */
-		if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
-				 us_info->tx_clock, COMM_DIR_TX)) {
-			uccs_err
-			    ("ucc_slow_init: Illegal value for parameter "
-				"'TxClock'.");
+		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+					COMM_DIR_TX)) {
+			printk(KERN_ERR "%s: illegal value for TX clock",
+			       __FUNCTION__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
 	}
 
-	/*
-	 * INTERRUPTS
-	 */
 	/* Set interrupt mask register at UCC level. */
 	out_be16(&us_regs->uccm, us_info->uccm_mask);
 
-	/* First, clear anything pending at UCC level, */
-	/* otherwise, old garbage may come through */
-	/* as soon as the dam is opened. */
+	/* First, clear anything pending at UCC level,
+	 * otherwise, old garbage may come through
+	 * as soon as the dam is opened. */
 
 	/* Writing '1' clears */
 	out_be16(&us_regs->ucce, 0xffff);
@@ -400,3 +367,5 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
 
 	kfree(uccs);
 }
+
+
diff --git a/arch/powerpc/sysdev/timer.c b/arch/powerpc/sysdev/timer.c
new file mode 100644
index 000000000000..4a01748b4217
--- /dev/null
+++ b/arch/powerpc/sysdev/timer.c
@@ -0,0 +1,71 @@
+/*
+ * Common code to keep time when machine suspends.
+ *
+ * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPLv2
+ */
+
+#include <linux/time.h>
+#include <linux/sysdev.h>
+#include <asm/rtc.h>
+
+static unsigned long suspend_rtc_time;
+
+/*
+ * Reset the time after a sleep.
+ */
+static int timer_resume(struct sys_device *dev)
+{
+	struct timeval tv;
+	struct timespec ts;
+	struct rtc_time cur_rtc_tm;
+	unsigned long cur_rtc_time, diff;
+
+	/* get current RTC time and convert to seconds */
+	get_rtc_time(&cur_rtc_tm);
+	rtc_tm_to_time(&cur_rtc_tm, &cur_rtc_time);
+
+	diff = cur_rtc_time - suspend_rtc_time;
+
+	/* adjust time of day by seconds that elapsed while
+	 * we were suspended */
+	do_gettimeofday(&tv);
+	ts.tv_sec = tv.tv_sec + diff;
+	ts.tv_nsec = tv.tv_usec * NSEC_PER_USEC;
+	do_settimeofday(&ts);
+
+	return 0;
+}
+
+static int timer_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct rtc_time suspend_rtc_tm;
+	WARN_ON(!ppc_md.get_rtc_time);
+
+	get_rtc_time(&suspend_rtc_tm);
+	rtc_tm_to_time(&suspend_rtc_tm, &suspend_rtc_time);
+
+	return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+	.resume = timer_resume,
+	.suspend = timer_suspend,
+	set_kset_name("timer"),
+};
+
+static struct sys_device device_timer = {
+	.id = 0,
+	.cls = &timer_sysclass,
+};
+
+static int time_init_device(void)
+{
+	int error = sysdev_class_register(&timer_sysclass);
+	if (!error)
+		error = sysdev_register(&device_timer);
+	return error;
+}
+
+device_initcall(time_init_device);
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 97f37ef4bbbf..337039ee51e6 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -48,7 +48,7 @@ phys_addr_t get_csrbase(void)
 	tsi = of_find_node_by_type(NULL, "tsi-bridge");
 	if (tsi) {
 		unsigned int size;
-		const void *prop = get_property(tsi, "reg", &size);
+		const void *prop = of_get_property(tsi, "reg", &size);
 		tsi108_csr_base = of_translate_address(tsi, prop);
 		of_node_put(tsi);
 	};
@@ -77,10 +77,10 @@ static int __init tsi108_eth_of_init(void)
 		struct resource r[2];
 		struct device_node *phy;
 		hw_info tsi_eth_data;
-		unsigned int *id;
-		unsigned int *phy_id;
+		const unsigned int *id;
+		const unsigned int *phy_id;
 		const void *mac_addr;
-		phandle *ph;
+		const phandle *ph;
 
 		memset(r, 0, sizeof(r));
 		memset(&tsi_eth_data, 0, sizeof(tsi_eth_data));
@@ -107,10 +107,10 @@ static int __init tsi108_eth_of_init(void)
 			goto err;
 		}
 
-		mac_addr = get_property(np, "address", NULL);
+		mac_addr = of_get_property(np, "address", NULL);
 		memcpy(tsi_eth_data.mac_addr, mac_addr, 6);
 
-		ph = (phandle *) get_property(np, "phy-handle", NULL);
+		ph = of_get_property(np, "phy-handle", NULL);
 		phy = of_find_node_by_phandle(*ph);
 
 		if (phy == NULL) {
@@ -118,8 +118,8 @@ static int __init tsi108_eth_of_init(void)
 			goto unreg;
 		}
 
-		id = (u32 *) get_property(phy, "reg", NULL);
-		phy_id = (u32 *) get_property(phy, "phy-id", NULL);
+		id = of_get_property(phy, "reg", NULL);
+		phy_id = of_get_property(phy, "phy-id", NULL);
 		ret = of_address_to_resource(phy, 0, &res);
 		if (ret) {
 			of_node_put(phy);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index ae249c6bbbcf..58b9e7f8abf2 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -211,7 +211,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
 	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
 
 	/* Get bus range if any */
-	bus_range = get_property(dev, "bus-range", &len);
+	bus_range = of_get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING "Can't get bus-range for %s, assume"
 		       " bus 0\n", dev->full_name);
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
new file mode 100644
index 000000000000..968fb40af9dc
--- /dev/null
+++ b/arch/powerpc/sysdev/uic.c
@@ -0,0 +1,342 @@
+/*
+ * arch/powerpc/sysdev/uic.c
+ *
+ * IBM PowerPC 4xx Universal Interrupt Controller
+ *
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sysdev.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/dcr.h>
+
+#define NR_UIC_INTS	32
+
+#define UIC_SR		0x0
+#define UIC_ER		0x2
+#define UIC_CR		0x3
+#define UIC_PR		0x4
+#define UIC_TR		0x5
+#define UIC_MSR		0x6
+#define UIC_VR		0x7
+#define UIC_VCR		0x8
+
+#define uic_irq_to_hw(virq)	(irq_map[virq].hwirq)
+
+struct uic *primary_uic;
+
+struct uic {
+	int index;
+	int dcrbase;
+
+	spinlock_t lock;
+
+	/* The remapper for this UIC */
+	struct irq_host	*irqhost;
+
+	/* For secondary UICs, the cascade interrupt's irqaction */
+	struct irqaction cascade;
+
+	/* The device node of the interrupt controller */
+	struct device_node *of_node;
+};
+
+static void uic_unmask_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+	u32 er;
+
+	spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er |= 1 << (31 - src);
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_mask_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+	u32 er;
+
+	spin_lock_irqsave(&uic->lock, flags);
+	er = mfdcr(uic->dcrbase + UIC_ER);
+	er &= ~(1 << (31 - src));
+	mtdcr(uic->dcrbase + UIC_ER, er);
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static void uic_ack_irq(unsigned int virq)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	unsigned long flags;
+
+	spin_lock_irqsave(&uic->lock, flags);
+	mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src));
+	spin_unlock_irqrestore(&uic->lock, flags);
+}
+
+static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
+{
+	struct uic *uic = get_irq_chip_data(virq);
+	unsigned int src = uic_irq_to_hw(virq);
+	struct irq_desc *desc = get_irq_desc(virq);
+	unsigned long flags;
+	int trigger, polarity;
+	u32 tr, pr, mask;
+
+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_NONE:
+		uic_mask_irq(virq);
+		return 0;
+
+	case IRQ_TYPE_EDGE_RISING:
+		trigger = 1; polarity = 1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		trigger = 1; polarity = 0;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		trigger = 0; polarity = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		trigger = 0; polarity = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mask = ~(1 << (31 - src));
+
+	spin_lock_irqsave(&uic->lock, flags);
+	tr = mfdcr(uic->dcrbase + UIC_TR);
+	pr = mfdcr(uic->dcrbase + UIC_PR);
+	tr = (tr & mask) | (trigger << (31-src));
+	pr = (pr & mask) | (polarity << (31-src));
+
+	mtdcr(uic->dcrbase + UIC_PR, pr);
+	mtdcr(uic->dcrbase + UIC_TR, tr);
+
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (trigger)
+		desc->status |= IRQ_LEVEL;
+
+	spin_unlock_irqrestore(&uic->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip uic_irq_chip = {
+	.typename	= " UIC  ",
+	.unmask		= uic_unmask_irq,
+	.mask		= uic_mask_irq,
+/* 	.mask_ack	= uic_mask_irq_and_ack, */
+	.ack		= uic_ack_irq,
+	.set_type	= uic_set_irq_type,
+};
+
+static int uic_host_match(struct irq_host *h, struct device_node *node)
+{
+	struct uic *uic = h->host_data;
+	return uic->of_node == node;
+}
+
+static int uic_host_map(struct irq_host *h, unsigned int virq,
+			irq_hw_number_t hw)
+{
+	struct uic *uic = h->host_data;
+
+	set_irq_chip_data(virq, uic);
+	/* Despite the name, handle_level_irq() works for both level
+	 * and edge irqs on UIC.  FIXME: check this is correct */
+	set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq);
+
+	/* Set default irq type */
+	set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
+			  u32 *intspec, unsigned int intsize,
+			  irq_hw_number_t *out_hwirq, unsigned int *out_type)
+
+{
+	/* UIC intspecs must have 2 cells */
+	BUG_ON(intsize != 2);
+	*out_hwirq = intspec[0];
+	*out_type = intspec[1];
+	return 0;
+}
+
+static struct irq_host_ops uic_host_ops = {
+	.match	= uic_host_match,
+	.map	= uic_host_map,
+	.xlate	= uic_host_xlate,
+};
+
+irqreturn_t uic_cascade(int virq, void *data)
+{
+	struct uic *uic = data;
+	u32 msr;
+	int src;
+	int subvirq;
+
+	msr = mfdcr(uic->dcrbase + UIC_MSR);
+	src = 32 - ffs(msr);
+
+	subvirq = irq_linear_revmap(uic->irqhost, src);
+	generic_handle_irq(subvirq);
+
+	return IRQ_HANDLED;
+}
+
+static struct uic * __init uic_init_one(struct device_node *node)
+{
+	struct uic *uic;
+	const u32 *indexp, *dcrreg;
+	int len;
+
+	BUG_ON(! device_is_compatible(node, "ibm,uic"));
+
+	uic = alloc_bootmem(sizeof(*uic));
+	if (! uic)
+		return NULL; /* FIXME: panic? */
+
+	memset(uic, 0, sizeof(*uic));
+	spin_lock_init(&uic->lock);
+	uic->of_node = of_node_get(node);
+	indexp = of_get_property(node, "cell-index", &len);
+	if (!indexp || (len != sizeof(u32))) {
+		printk(KERN_ERR "uic: Device node %s has missing or invalid "
+		       "cell-index property\n", node->full_name);
+		return NULL;
+	}
+	uic->index = *indexp;
+
+	dcrreg = of_get_property(node, "dcr-reg", &len);
+	if (!dcrreg || (len != 2*sizeof(u32))) {
+		printk(KERN_ERR "uic: Device node %s has missing or invalid "
+		       "dcr-reg property\n", node->full_name);
+		return NULL;
+	}
+	uic->dcrbase = *dcrreg;
+
+	uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS,
+				      &uic_host_ops, -1);
+	if (! uic->irqhost) {
+		of_node_put(node);
+		return NULL; /* FIXME: panic? */
+	}
+
+	uic->irqhost->host_data = uic;
+
+	/* Start with all interrupts disabled, level and non-critical */
+	mtdcr(uic->dcrbase + UIC_ER, 0);
+	mtdcr(uic->dcrbase + UIC_CR, 0);
+	mtdcr(uic->dcrbase + UIC_TR, 0);
+	/* Clear any pending interrupts, in case the firmware left some */
+	mtdcr(uic->dcrbase + UIC_SR, 0xffffffff);
+
+	printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
+		NR_UIC_INTS, uic->dcrbase);
+
+	return uic;
+}
+
+void __init uic_init_tree(void)
+{
+	struct device_node *np;
+	struct uic *uic;
+	const u32 *interrupts;
+
+	/* First locate and initialize the top-level UIC */
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,uic");
+	while (np) {
+		interrupts = of_get_property(np, "interrupts", NULL);
+		if (! interrupts)
+			break;
+
+		np = of_find_compatible_node(np, NULL, "ibm,uic");
+	}
+
+	BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
+		      * top-level interrupt controller */
+	primary_uic = uic_init_one(np);
+	if (! primary_uic)
+		panic("Unable to initialize primary UIC %s\n", np->full_name);
+
+	irq_set_default_host(primary_uic->irqhost);
+	of_node_put(np);
+
+	/* The scan again for cascaded UICs */
+	np = of_find_compatible_node(NULL, NULL, "ibm,uic");
+	while (np) {
+		interrupts = of_get_property(np, "interrupts", NULL);
+		if (interrupts) {
+			/* Secondary UIC */
+			int cascade_virq;
+			int ret;
+
+			uic = uic_init_one(np);
+			if (! uic)
+				panic("Unable to initialize a secondary UIC %s\n",
+				      np->full_name);
+
+			cascade_virq = irq_of_parse_and_map(np, 0);
+
+			uic->cascade.handler = uic_cascade;
+			uic->cascade.name = "UIC cascade";
+			uic->cascade.dev_id = uic;
+
+			ret = setup_irq(cascade_virq, &uic->cascade);
+			if (ret)
+				printk(KERN_ERR "Failed to setup_irq(%d) for "
+				       "UIC%d cascade\n", cascade_virq,
+				       uic->index);
+
+			/* FIXME: setup critical cascade?? */
+		}
+
+		np = of_find_compatible_node(np, NULL, "ibm,uic");
+	}
+}
+
+/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
+unsigned int uic_get_irq(void)
+{
+	u32 msr;
+	int src;
+
+	BUG_ON(! primary_uic);
+
+	msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
+	src = 32 - ffs(msr);
+
+	return irq_linear_revmap(primary_uic->irqhost, src);
+}
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0183e5fbaf46..b481db1dacb4 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -218,7 +218,7 @@ Commands:\n\
 "  ss	stop execution on all spus\n\
   sr	restore execution on stopped spus\n\
   sf  #	dump spu fields for spu # (in hex)\n\
-  sd  #	dump spu local store for spu # (in hex)\
+  sd  #	dump spu local store for spu # (in hex)\n\
   sdi #	disassemble spu local store for spu # (in hex)\n"
 #endif
 "  S	print special registers\n\
@@ -330,18 +330,17 @@ static void release_output_lock(void)
 static int xmon_core(struct pt_regs *regs, int fromipi)
 {
 	int cmd = 0;
-	unsigned long msr;
 	struct bpt *bp;
 	long recurse_jmp[JMP_BUF_LEN];
 	unsigned long offset;
+	unsigned long flags;
 #ifdef CONFIG_SMP
 	int cpu;
 	int secondary;
 	unsigned long timeout;
 #endif
 
-	msr = mfmsr();
-	mtmsr(msr & ~MSR_EE);	/* disable interrupts */
+	local_irq_save(flags);
 
 	bp = in_breakpoint_table(regs->nip, &offset);
 	if (bp != NULL) {
@@ -516,7 +515,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi)
 
 	insert_cpu_bpts();
 
-	mtmsr(msr);		/* restore interrupt enable */
+	local_irq_restore(flags);
 
 	return cmd != 'X' && cmd != EOF;
 }
@@ -1360,8 +1359,12 @@ static void print_bug_trap(struct pt_regs *regs)
 	if (is_warning_bug(bug))
 		return;
 
+#ifdef CONFIG_DEBUG_BUGVERBOSE
 	printf("kernel BUG at %s:%u!\n",
 	       bug->file, bug->line);
+#else
+	printf("kernel BUG at %p!\n", (void *)bug->bug_addr);
+#endif
 }
 
 void excprint(struct pt_regs *fp)
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c
index a6056c29cf00..48ce84f5be93 100644
--- a/arch/ppc/8260_io/enet.c
+++ b/arch/ppc/8260_io/enet.c
@@ -477,7 +477,6 @@ for (;;) {
 			cep->stats.rx_dropped++;
 		}
 		else {
-			skb->dev = dev;
 			skb_put(skb,pkt_len-4);	/* Make room */
 			eth_copy_and_sum(skb,
 				(unsigned char *)__va(bdp->cbd_bufaddr),
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
index 06b84c372e58..9db825fe37f0 100644
--- a/arch/ppc/8260_io/fcc_enet.c
+++ b/arch/ppc/8260_io/fcc_enet.c
@@ -734,7 +734,6 @@ for (;;) {
 			cep->stats.rx_dropped++;
 		}
 		else {
-			skb->dev = dev;
 			skb_put(skb,pkt_len);	/* Make room */
 			eth_copy_and_sum(skb,
 				(unsigned char *)__va(bdp->cbd_bufaddr),
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig
index 57dacf978532..c623e44f01ad 100644
--- a/arch/ppc/8xx_io/Kconfig
+++ b/arch/ppc/8xx_io/Kconfig
@@ -74,10 +74,6 @@ config ENET_BIG_BUFFERS
 	  Allocate large buffers for MPC8xx Ethernet. Increases throughput
 	  and decreases the likelihood of dropped packets, but costs memory.
 
-config HTDMSOUND
-	bool "Embedded Planet HIOX Audio"
-	depends on SOUND=y
-
 # This doesn't really belong here, but it is convenient to ask
 # 8xx specific questions.
 comment "Generic MPC8xx Options"
diff --git a/arch/ppc/8xx_io/Makefile b/arch/ppc/8xx_io/Makefile
index d8760181fe99..1051a06df7e0 100644
--- a/arch/ppc/8xx_io/Makefile
+++ b/arch/ppc/8xx_io/Makefile
@@ -7,4 +7,3 @@ obj-y			:= commproc.o
 obj-$(CONFIG_FEC_ENET)	+= fec.o
 obj-$(CONFIG_SCC_ENET)	+= enet.o
 obj-$(CONFIG_UCODE_PATCH) += micropatch.o
-obj-$(CONFIG_HTDMSOUND) += cs4218_tdm.o
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 3b23bcb35b7a..7a8722beac12 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -39,6 +39,21 @@
 #include <asm/tlbflush.h>
 #include <asm/rheap.h>
 
+#define immr_map(member)						\
+({									\
+	u32 offset = offsetof(immap_t, member);				\
+	void *addr = ioremap (IMAP_ADDR + offset,			\
+			      sizeof( ((immap_t*)0)->member));		\
+	addr;								\
+})
+
+#define immr_map_size(member, size)					\
+({									\
+	u32 offset = offsetof(immap_t, member);				\
+	void *addr = ioremap (IMAP_ADDR + offset, size);		\
+	addr;								\
+})
+
 static void m8xx_cpm_dpinit(void);
 static	uint	host_buffer;	/* One page of host buffer */
 static	uint	host_end;	/* end + 1 */
@@ -364,11 +379,16 @@ static rh_block_t cpm_boot_dpmem_rh_block[16];
 static rh_info_t cpm_dpmem_info;
 
 #define CPM_DPMEM_ALIGNMENT	8
+static u8* dpram_vbase;
+static uint dpram_pbase;
 
 void m8xx_cpm_dpinit(void)
 {
 	spin_lock_init(&cpm_dpmem_lock);
 
+	dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
+	dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem;
+
 	/* Initialize the info header */
 	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
 			sizeof(cpm_boot_dpmem_rh_block) /
@@ -442,3 +462,9 @@ void *cpm_dpram_addr(uint offset)
 	return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
 }
 EXPORT_SYMBOL(cpm_dpram_addr);
+
+uint cpm_dpram_phys(u8* addr)
+{
+	return (dpram_pbase + (uint)(addr - dpram_vbase));
+}
+EXPORT_SYMBOL(cpm_dpram_phys);
diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h
deleted file mode 100644
index e5f943045afa..000000000000
--- a/arch/ppc/8xx_io/cs4218.h
+++ /dev/null
@@ -1,166 +0,0 @@
-#ifndef _cs4218_h_
-/*
- *  Hacked version of linux/drivers/sound/dmasound/dmasound.h
- *
- *
- *  Minor numbers for the sound driver.
- *
- *  Unfortunately Creative called the codec chip of SB as a DSP. For this
- *  reason the /dev/dsp is reserved for digitized audio use. There is a
- *  device for true DSP processors but it will be called something else.
- *  In v3.0 it's /dev/sndproc but this could be a temporary solution.
- */
-#define _cs4218_h_
-
-#include <linux/types.h>
-
-#define SND_NDEVS	256	/* Number of supported devices */
-#define SND_DEV_CTL	0	/* Control port /dev/mixer */
-#define SND_DEV_SEQ	1	/* Sequencer output /dev/sequencer (FM
-				   synthesizer and MIDI output) */
-#define SND_DEV_MIDIN	2	/* Raw midi access */
-#define SND_DEV_DSP	3	/* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO	4	/* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16	5	/* Like /dev/dsp but 16 bits/sample */
-#define SND_DEV_STATUS	6	/* /dev/sndstat */
-/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
-#define SND_DEV_SEQ2	8	/* /dev/sequencer, level 2 interface */
-#define SND_DEV_SNDPROC 9	/* /dev/sndproc for programmable devices */
-#define SND_DEV_PSS	SND_DEV_SNDPROC
-
-/* switch on various prinks */
-#define DEBUG_DMASOUND 1
-
-#define MAX_AUDIO_DEV	5
-#define MAX_MIXER_DEV	4
-#define MAX_SYNTH_DEV	3
-#define MAX_MIDI_DEV	6
-#define MAX_TIMER_DEV	3
-
-#define MAX_CATCH_RADIUS	10
-
-#define le2be16(x)	(((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
-#define le2be16dbl(x)	(((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))
-
-#define IOCTL_IN(arg, ret) \
-	do { int error = get_user(ret, (int *)(arg)); \
-		if (error) return error; \
-	} while (0)
-#define IOCTL_OUT(arg, ret)	ioctl_return((int *)(arg), ret)
-
-static inline int ioctl_return(int *addr, int value)
-{
-	return value < 0 ? value : put_user(value, addr);
-}
-
-#define HAS_RECORD
-
-    /*
-     *  Initialization
-     */
-
-/* description of the set-up applies to either hard or soft settings */
-
-typedef struct {
-    int format;		/* AFMT_* */
-    int stereo;		/* 0 = mono, 1 = stereo */
-    int size;		/* 8/16 bit*/
-    int speed;		/* speed */
-} SETTINGS;
-
-    /*
-     *  Machine definitions
-     */
-
-typedef struct {
-    const char *name;
-    const char *name2;
-    void (*open)(void);
-    void (*release)(void);
-    void *(*dma_alloc)(unsigned int, gfp_t);
-    void (*dma_free)(void *, unsigned int);
-    int (*irqinit)(void);
-#ifdef MODULE
-    void (*irqcleanup)(void);
-#endif
-    void (*init)(void);
-    void (*silence)(void);
-    int (*setFormat)(int);
-    int (*setVolume)(int);
-    int (*setBass)(int);
-    int (*setTreble)(int);
-    int (*setGain)(int);
-    void (*play)(void);
-    void (*record)(void);		/* optional */
-    void (*mixer_init)(void);		/* optional */
-    int (*mixer_ioctl)(u_int, u_long);	/* optional */
-    int (*write_sq_setup)(void);	/* optional */
-    int (*read_sq_setup)(void);		/* optional */
-    int (*sq_open)(mode_t);		/* optional */
-    int (*state_info)(char *, size_t);	/* optional */
-    void (*abort_read)(void);		/* optional */
-    int min_dsp_speed;
-    int max_dsp_speed;
-    int version ;
-    int hardware_afmts ;		/* OSS says we only return h'ware info */
-					/* when queried via SNDCTL_DSP_GETFMTS */
-    int capabilities ;		/* low-level reply to SNDCTL_DSP_GETCAPS */
-    SETTINGS default_hard ;	/* open() or init() should set something valid */
-    SETTINGS default_soft ;	/* you can make it look like old OSS, if you want to */
-} MACHINE;
-
-    /*
-     *  Low level stuff
-     */
-
-typedef struct {
-    ssize_t (*ct_ulaw)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_alaw)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_s8)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_u8)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_s16be)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_u16be)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_s16le)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-    ssize_t (*ct_u16le)(const u_char *, size_t, u_char *, ssize_t *, ssize_t);
-} TRANS;
-
-
-    /*
-     * Sound queue stuff, the heart of the driver
-     */
-
-struct sound_queue {
-    /* buffers allocated for this queue */
-    int numBufs;		/* real limits on what the user can have */
-    int bufSize;		/* in bytes */
-    char **buffers;
-
-    /* current parameters */
-    int locked ;		/* params cannot be modified when != 0 */
-    int user_frags ;		/* user requests this many */
-    int user_frag_size ;	/* of this size */
-    int max_count;		/* actual # fragments <= numBufs */
-    int block_size;		/* internal block size in bytes */
-    int max_active;		/* in-use fragments <= max_count */
-
-    /* it shouldn't be necessary to declare any of these volatile */
-    int front, rear, count;
-    int rear_size;
-    /*
-     *	The use of the playing field depends on the hardware
-     *
-     *	Atari, PMac: The number of frames that are loaded/playing
-     *
-     *	Amiga: Bit 0 is set: a frame is loaded
-     *	       Bit 1 is set: a frame is playing
-     */
-    int active;
-    wait_queue_head_t action_queue, open_queue, sync_queue;
-    int open_mode;
-    int busy, syncing, xruns, died;
-};
-
-#define SLEEP(queue)		interruptible_sleep_on_timeout(&queue, HZ)
-#define WAKE_UP(queue)		(wake_up_interruptible(&queue))
-
-#endif /* _cs4218_h_ */
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
deleted file mode 100644
index a956f28ab162..000000000000
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ /dev/null
@@ -1,2833 +0,0 @@
-
-/* This is a modified version of linux/drivers/sound/dmasound.c to
- * support the CS4218 codec on the 8xx TDM port.  Thanks to everyone
- * that contributed to the dmasound software (which includes me :-).
- *
- * The CS4218 is configured in Mode 4, sub-mode 0.  This provides
- * left/right data only on the TDM port, as a 32-bit word, per frame
- * pulse.  The control of the CS4218 is provided by some other means,
- * like the SPI port.
- * Dan Malek (dmalek@jlc.net)
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/major.h>
-#include <linux/fcntl.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/sound.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-/* Should probably do something different with this path name.....
- * Actually, I should just stop using it...
- */
-#include "cs4218.h"
-#include <linux/soundcard.h>
-
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/commproc.h>
-
-#define DMASND_CS4218		5
-
-#define MAX_CATCH_RADIUS	10
-#define MIN_BUFFERS		4
-#define MIN_BUFSIZE 		4
-#define MAX_BUFSIZE		128
-
-#define HAS_8BIT_TABLES
-
-static int sq_unit = -1;
-static int mixer_unit = -1;
-static int state_unit = -1;
-static int irq_installed = 0;
-static char **sound_buffers = NULL;
-static char **sound_read_buffers = NULL;
-
-static DEFINE_SPINLOCK(cs4218_lock);
-
-/* Local copies of things we put in the control register.  Output
- * volume, like most codecs is really attenuation.
- */
-static int cs4218_rate_index;
-
-/*
- * Stuff for outputting a beep.  The values range from -327 to +327
- * so we can multiply by an amplitude in the range 0..100 to get a
- * signed short value to put in the output buffer.
- */
-static short beep_wform[256] = {
-	0,	40,	79,	117,	153,	187,	218,	245,
-	269,	288,	304,	316,	323,	327,	327,	324,
-	318,	310,	299,	288,	275,	262,	249,	236,
-	224,	213,	204,	196,	190,	186,	183,	182,
-	182,	183,	186,	189,	192,	196,	200,	203,
-	206,	208,	209,	209,	209,	207,	204,	201,
-	197,	193,	188,	183,	179,	174,	170,	166,
-	163,	161,	160,	159,	159,	160,	161,	162,
-	164,	166,	168,	169,	171,	171,	171,	170,
-	169,	167,	163,	159,	155,	150,	144,	139,
-	133,	128,	122,	117,	113,	110,	107,	105,
-	103,	103,	103,	103,	104,	104,	105,	105,
-	105,	103,	101,	97,	92,	86,	78,	68,
-	58,	45,	32,	18,	3,	-11,	-26,	-41,
-	-55,	-68,	-79,	-88,	-95,	-100,	-102,	-102,
-	-99,	-93,	-85,	-75,	-62,	-48,	-33,	-16,
-	0,	16,	33,	48,	62,	75,	85,	93,
-	99,	102,	102,	100,	95,	88,	79,	68,
-	55,	41,	26,	11,	-3,	-18,	-32,	-45,
-	-58,	-68,	-78,	-86,	-92,	-97,	-101,	-103,
-	-105,	-105,	-105,	-104,	-104,	-103,	-103,	-103,
-	-103,	-105,	-107,	-110,	-113,	-117,	-122,	-128,
-	-133,	-139,	-144,	-150,	-155,	-159,	-163,	-167,
-	-169,	-170,	-171,	-171,	-171,	-169,	-168,	-166,
-	-164,	-162,	-161,	-160,	-159,	-159,	-160,	-161,
-	-163,	-166,	-170,	-174,	-179,	-183,	-188,	-193,
-	-197,	-201,	-204,	-207,	-209,	-209,	-209,	-208,
-	-206,	-203,	-200,	-196,	-192,	-189,	-186,	-183,
-	-182,	-182,	-183,	-186,	-190,	-196,	-204,	-213,
-	-224,	-236,	-249,	-262,	-275,	-288,	-299,	-310,
-	-318,	-324,	-327,	-327,	-323,	-316,	-304,	-288,
-	-269,	-245,	-218,	-187,	-153,	-117,	-79,	-40,
-};
-
-#define BEEP_SPEED	5	/* 22050 Hz sample rate */
-#define BEEP_BUFLEN	512
-#define BEEP_VOLUME	15	/* 0 - 100 */
-
-static int beep_volume = BEEP_VOLUME;
-static int beep_playing = 0;
-static int beep_state = 0;
-static short *beep_buf;
-static void (*orig_mksound)(unsigned int, unsigned int);
-
-/* This is found someplace else......I guess in the keyboard driver
- * we don't include.
- */
-static void (*kd_mksound)(unsigned int, unsigned int);
-
-static int catchRadius = 0;
-static int numBufs = 4, bufSize = 32;
-static int numReadBufs = 4, readbufSize = 32;
-
-
-/* TDM/Serial transmit and receive buffer descriptors.
-*/
-static volatile cbd_t	*rx_base, *rx_cur, *tx_base, *tx_cur;
-
-module_param(catchRadius, int, 0);
-module_param(numBufs, int, 0);
-module_param(bufSize, int, 0);
-module_param(numreadBufs, int, 0);
-module_param(readbufSize, int, 0);
-
-#define arraysize(x)	(sizeof(x)/sizeof(*(x)))
-#define le2be16(x)	(((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
-#define le2be16dbl(x)	(((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))
-
-#define IOCTL_IN(arg, ret) \
-	do { int error = get_user(ret, (int *)(arg)); \
-		if (error) return error; \
-	} while (0)
-#define IOCTL_OUT(arg, ret)	ioctl_return((int *)(arg), ret)
-
-/* CS4218 serial port control in mode 4.
-*/
-#define CS_INTMASK	((uint)0x40000000)
-#define CS_DO1		((uint)0x20000000)
-#define CS_LATTEN	((uint)0x1f000000)
-#define CS_RATTEN	((uint)0x00f80000)
-#define CS_MUTE		((uint)0x00040000)
-#define CS_ISL		((uint)0x00020000)
-#define CS_ISR		((uint)0x00010000)
-#define CS_LGAIN	((uint)0x0000f000)
-#define CS_RGAIN	((uint)0x00000f00)
-
-#define CS_LATTEN_SET(X)	(((X) & 0x1f) << 24)
-#define CS_RATTEN_SET(X)	(((X) & 0x1f) << 19)
-#define CS_LGAIN_SET(X)		(((X) & 0x0f) << 12)
-#define CS_RGAIN_SET(X)		(((X) & 0x0f) << 8)
-
-#define CS_LATTEN_GET(X)	(((X) >> 24) & 0x1f)
-#define CS_RATTEN_GET(X)	(((X) >> 19) & 0x1f)
-#define CS_LGAIN_GET(X)		(((X) >> 12) & 0x0f)
-#define CS_RGAIN_GET(X)		(((X) >> 8) & 0x0f)
-
-/* The control register is effectively write only.  We have to keep a copy
- * of what we write.
- */
-static	uint	cs4218_control;
-
-/* A place to store expanding information.
-*/
-static int	expand_bal;
-static int	expand_data;
-
-/* Since I can't make the microcode patch work for the SPI, I just
- * clock the bits using software.
- */
-static	void	sw_spi_init(void);
-static	void	sw_spi_io(u_char *obuf, u_char *ibuf, uint bcnt);
-static	uint	cs4218_ctl_write(uint ctlreg);
-
-/*** Some low level helpers **************************************************/
-
-/* 16 bit mu-law */
-
-static short ulaw2dma16[] = {
-	-32124,	-31100,	-30076,	-29052,	-28028,	-27004,	-25980,	-24956,
-	-23932,	-22908,	-21884,	-20860,	-19836,	-18812,	-17788,	-16764,
-	-15996,	-15484,	-14972,	-14460,	-13948,	-13436,	-12924,	-12412,
-	-11900,	-11388,	-10876,	-10364,	-9852,	-9340,	-8828,	-8316,
-	-7932,	-7676,	-7420,	-7164,	-6908,	-6652,	-6396,	-6140,
-	-5884,	-5628,	-5372,	-5116,	-4860,	-4604,	-4348,	-4092,
-	-3900,	-3772,	-3644,	-3516,	-3388,	-3260,	-3132,	-3004,
-	-2876,	-2748,	-2620,	-2492,	-2364,	-2236,	-2108,	-1980,
-	-1884,	-1820,	-1756,	-1692,	-1628,	-1564,	-1500,	-1436,
-	-1372,	-1308,	-1244,	-1180,	-1116,	-1052,	-988,	-924,
-	-876,	-844,	-812,	-780,	-748,	-716,	-684,	-652,
-	-620,	-588,	-556,	-524,	-492,	-460,	-428,	-396,
-	-372,	-356,	-340,	-324,	-308,	-292,	-276,	-260,
-	-244,	-228,	-212,	-196,	-180,	-164,	-148,	-132,
-	-120,	-112,	-104,	-96,	-88,	-80,	-72,	-64,
-	-56,	-48,	-40,	-32,	-24,	-16,	-8,	0,
-	32124,	31100,	30076,	29052,	28028,	27004,	25980,	24956,
-	23932,	22908,	21884,	20860,	19836,	18812,	17788,	16764,
-	15996,	15484,	14972,	14460,	13948,	13436,	12924,	12412,
-	11900,	11388,	10876,	10364,	9852,	9340,	8828,	8316,
-	7932,	7676,	7420,	7164,	6908,	6652,	6396,	6140,
-	5884,	5628,	5372,	5116,	4860,	4604,	4348,	4092,
-	3900,	3772,	3644,	3516,	3388,	3260,	3132,	3004,
-	2876,	2748,	2620,	2492,	2364,	2236,	2108,	1980,
-	1884,	1820,	1756,	1692,	1628,	1564,	1500,	1436,
-	1372,	1308,	1244,	1180,	1116,	1052,	988,	924,
-	876,	844,	812,	780,	748,	716,	684,	652,
-	620,	588,	556,	524,	492,	460,	428,	396,
-	372,	356,	340,	324,	308,	292,	276,	260,
-	244,	228,	212,	196,	180,	164,	148,	132,
-	120,	112,	104,	96,	88,	80,	72,	64,
-	56,	48,	40,	32,	24,	16,	8,	0,
-};
-
-/* 16 bit A-law */
-
-static short alaw2dma16[] = {
-	-5504,	-5248,	-6016,	-5760,	-4480,	-4224,	-4992,	-4736,
-	-7552,	-7296,	-8064,	-7808,	-6528,	-6272,	-7040,	-6784,
-	-2752,	-2624,	-3008,	-2880,	-2240,	-2112,	-2496,	-2368,
-	-3776,	-3648,	-4032,	-3904,	-3264,	-3136,	-3520,	-3392,
-	-22016,	-20992,	-24064,	-23040,	-17920,	-16896,	-19968,	-18944,
-	-30208,	-29184,	-32256,	-31232,	-26112,	-25088,	-28160,	-27136,
-	-11008,	-10496,	-12032,	-11520,	-8960,	-8448,	-9984,	-9472,
-	-15104,	-14592,	-16128,	-15616,	-13056,	-12544,	-14080,	-13568,
-	-344,	-328,	-376,	-360,	-280,	-264,	-312,	-296,
-	-472,	-456,	-504,	-488,	-408,	-392,	-440,	-424,
-	-88,	-72,	-120,	-104,	-24,	-8,	-56,	-40,
-	-216,	-200,	-248,	-232,	-152,	-136,	-184,	-168,
-	-1376,	-1312,	-1504,	-1440,	-1120,	-1056,	-1248,	-1184,
-	-1888,	-1824,	-2016,	-1952,	-1632,	-1568,	-1760,	-1696,
-	-688,	-656,	-752,	-720,	-560,	-528,	-624,	-592,
-	-944,	-912,	-1008,	-976,	-816,	-784,	-880,	-848,
-	5504,	5248,	6016,	5760,	4480,	4224,	4992,	4736,
-	7552,	7296,	8064,	7808,	6528,	6272,	7040,	6784,
-	2752,	2624,	3008,	2880,	2240,	2112,	2496,	2368,
-	3776,	3648,	4032,	3904,	3264,	3136,	3520,	3392,
-	22016,	20992,	24064,	23040,	17920,	16896,	19968,	18944,
-	30208,	29184,	32256,	31232,	26112,	25088,	28160,	27136,
-	11008,	10496,	12032,	11520,	8960,	8448,	9984,	9472,
-	15104,	14592,	16128,	15616,	13056,	12544,	14080,	13568,
-	344,	328,	376,	360,	280,	264,	312,	296,
-	472,	456,	504,	488,	408,	392,	440,	424,
-	88,	72,	120,	104,	24,	8,	56,	40,
-	216,	200,	248,	232,	152,	136,	184,	168,
-	1376,	1312,	1504,	1440,	1120,	1056,	1248,	1184,
-	1888,	1824,	2016,	1952,	1632,	1568,	1760,	1696,
-	688,	656,	752,	720,	560,	528,	624,	592,
-	944,	912,	1008,	976,	816,	784,	880,	848,
-};
-
-
-/*** Translations ************************************************************/
-
-
-static ssize_t cs4218_ct_law(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t cs4218_ct_s8(const u_char *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft);
-static ssize_t cs4218_ct_u8(const u_char *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft);
-static ssize_t cs4218_ct_s16(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t cs4218_ct_u16(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t cs4218_ctx_law(const u_char *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft);
-static ssize_t cs4218_ctx_s8(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t cs4218_ctx_u8(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t cs4218_ctx_s16(const u_char *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft);
-static ssize_t cs4218_ctx_u16(const u_char *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft);
-static ssize_t cs4218_ct_s16_read(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-static ssize_t cs4218_ct_u16_read(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft);
-
-
-/*** Low level stuff *********************************************************/
-
-struct cs_sound_settings {
-	MACHINE mach;		/* machine dependent things */
-	SETTINGS hard;		/* hardware settings */
-	SETTINGS soft;		/* software settings */
-	SETTINGS dsp;		/* /dev/dsp default settings */
-	TRANS *trans_write;	/* supported translations for playback */
-	TRANS *trans_read;	/* supported translations for record */
-	int volume_left;	/* volume (range is machine dependent) */
-	int volume_right;
-	int bass;		/* tone (range is machine dependent) */
-	int treble;
-	int gain;
-	int minDev;		/* minor device number currently open */
-};
-
-static struct cs_sound_settings sound;
-
-static void *CS_Alloc(unsigned int size, gfp_t flags);
-static void CS_Free(void *ptr, unsigned int size);
-static int CS_IrqInit(void);
-#ifdef MODULE
-static void CS_IrqCleanup(void);
-#endif /* MODULE */
-static void CS_Silence(void);
-static void CS_Init(void);
-static void CS_Play(void);
-static void CS_Record(void);
-static int CS_SetFormat(int format);
-static int CS_SetVolume(int volume);
-static void cs4218_tdm_tx_intr(void *devid);
-static void cs4218_tdm_rx_intr(void *devid);
-static void cs4218_intr(void *devid);
-static int cs_get_volume(uint reg);
-static int cs_volume_setter(int volume, int mute);
-static int cs_get_gain(uint reg);
-static int cs_set_gain(int gain);
-static void cs_mksound(unsigned int hz, unsigned int ticks);
-static void cs_nosound(unsigned long xx);
-
-/*** Mid level stuff *********************************************************/
-
-
-static void sound_silence(void);
-static void sound_init(void);
-static int sound_set_format(int format);
-static int sound_set_speed(int speed);
-static int sound_set_stereo(int stereo);
-static int sound_set_volume(int volume);
-
-static ssize_t sound_copy_translate(const u_char *userPtr,
-				    size_t userCount,
-				    u_char frame[], ssize_t *frameUsed,
-				    ssize_t frameLeft);
-static ssize_t sound_copy_translate_read(const u_char *userPtr,
-				    size_t userCount,
-				    u_char frame[], ssize_t *frameUsed,
-				    ssize_t frameLeft);
-
-
-/*
- * /dev/mixer abstraction
- */
-
-struct sound_mixer {
-    int busy;
-    int modify_counter;
-};
-
-static struct sound_mixer mixer;
-
-static struct sound_queue sq;
-static struct sound_queue read_sq;
-
-#define sq_block_address(i)	(sq.buffers[i])
-#define SIGNAL_RECEIVED	(signal_pending(current))
-#define NON_BLOCKING(open_mode)	(open_mode & O_NONBLOCK)
-#define ONE_SECOND	HZ	/* in jiffies (100ths of a second) */
-#define NO_TIME_LIMIT	0xffffffff
-
-/*
- * /dev/sndstat
- */
-
-struct sound_state {
-	int busy;
-	char buf[512];
-	int len, ptr;
-};
-
-static struct sound_state state;
-
-/*** Common stuff ********************************************************/
-
-static long long sound_lseek(struct file *file, long long offset, int orig);
-
-/*** Config & Setup **********************************************************/
-
-void dmasound_setup(char *str, int *ints);
-
-/*** Translations ************************************************************/
-
-
-/* ++TeSche: radically changed for new expanding purposes...
- *
- * These two routines now deal with copying/expanding/translating the samples
- * from user space into our buffer at the right frequency. They take care about
- * how much data there's actually to read, how much buffer space there is and
- * to convert samples into the right frequency/encoding. They will only work on
- * complete samples so it may happen they leave some bytes in the input stream
- * if the user didn't write a multiple of the current sample size. They both
- * return the number of bytes they've used from both streams so you may detect
- * such a situation. Luckily all programs should be able to cope with that.
- *
- * I think I've optimized anything as far as one can do in plain C, all
- * variables should fit in registers and the loops are really short. There's
- * one loop for every possible situation. Writing a more generalized and thus
- * parameterized loop would only produce slower code. Feel free to optimize
- * this in assembler if you like. :)
- *
- * I think these routines belong here because they're not yet really hardware
- * independent, especially the fact that the Falcon can play 16bit samples
- * only in stereo is hardcoded in both of them!
- *
- * ++geert: split in even more functions (one per format)
- */
-
-static ssize_t cs4218_ct_law(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	short *table = sound.soft.format == AFMT_MU_LAW ? ulaw2dma16: alaw2dma16;
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = sound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-		if (get_user(data, userPtr++))
-			return -EFAULT;
-		val = table[data];
-		*p++ = val;
-		if (stereo) {
-			if (get_user(data, userPtr++))
-				return -EFAULT;
-			val = table[data];
-		}
-		*p++ = val;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t cs4218_ct_s8(const u_char *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = sound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-		if (get_user(data, userPtr++))
-			return -EFAULT;
-		val = data << 8;
-		*p++ = val;
-		if (stereo) {
-			if (get_user(data, userPtr++))
-				return -EFAULT;
-			val = data << 8;
-		}
-		*p++ = val;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t cs4218_ct_u8(const u_char *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = sound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-		if (get_user(data, userPtr++))
-			return -EFAULT;
-		val = (data ^ 0x80) << 8;
-		*p++ = val;
-		if (stereo) {
-			if (get_user(data, userPtr++))
-				return -EFAULT;
-			val = (data ^ 0x80) << 8;
-		}
-		*p++ = val;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-/* This is the default format of the codec.  Signed, 16-bit stereo
- * generated by an application shouldn't have to be copied at all.
- * We should just get the phsical address of the buffers and update
- * the TDM BDs directly.
- */
-static ssize_t cs4218_ct_s16(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int stereo = sound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min(userCount, frameLeft);
-	if (!stereo) {
-		short *up = (short *) userPtr;
-		while (count > 0) {
-			short data;
-			if (get_user(data, up++))
-				return -EFAULT;
-			*fp++ = data;
-			*fp++ = data;
-			count--;
-		}
-	} else {
-		if (copy_from_user(fp, userPtr, count * 4))
-			return -EFAULT;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-static ssize_t cs4218_ct_u16(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	int stereo = sound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-	short *up = (short *) userPtr;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		int data;
-		if (get_user(data, up++))
-			return -EFAULT;
-		data ^= mask;
-		*fp++ = data;
-		if (stereo) {
-			if (get_user(data, up++))
-				return -EFAULT;
-			data ^= mask;
-		}
-		*fp++ = data;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-
-static ssize_t cs4218_ctx_law(const u_char *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft)
-{
-	unsigned short *table = (unsigned short *)
-		(sound.soft.format == AFMT_MU_LAW ? ulaw2dma16: alaw2dma16);
-	unsigned int data = expand_data;
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	int bal = expand_bal;
-	int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
-	int utotal, ftotal;
-	int stereo = sound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(c, userPtr++))
-				return -EFAULT;
-			data = table[c];
-			if (stereo) {
-				if (get_user(c, userPtr++))
-					return -EFAULT;
-				data = (data << 16) + table[c];
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-
-static ssize_t cs4218_ctx_s8(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	int bal = expand_bal;
-	int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
-	int stereo = sound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(c, userPtr++))
-				return -EFAULT;
-			data = c << 8;
-			if (stereo) {
-				if (get_user(c, userPtr++))
-					return -EFAULT;
-				data = (data << 16) + (c << 8);
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-
-static ssize_t cs4218_ctx_u8(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	int bal = expand_bal;
-	int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
-	int stereo = sound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		u_char c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(c, userPtr++))
-				return -EFAULT;
-			data = (c ^ 0x80) << 8;
-			if (stereo) {
-				if (get_user(c, userPtr++))
-					return -EFAULT;
-				data = (data << 16) + ((c ^ 0x80) << 8);
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 2: utotal;
-}
-
-
-static ssize_t cs4218_ctx_s16(const u_char *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft)
-{
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	unsigned short *up = (unsigned short *) userPtr;
-	int bal = expand_bal;
-	int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
-	int stereo = sound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		unsigned short c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(data, up++))
-				return -EFAULT;
-			if (stereo) {
-				if (get_user(c, up++))
-					return -EFAULT;
-				data = (data << 16) + c;
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 4: utotal * 2;
-}
-
-
-static ssize_t cs4218_ctx_u16(const u_char *userPtr, size_t userCount,
-			    u_char frame[], ssize_t *frameUsed,
-			    ssize_t frameLeft)
-{
-	int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	unsigned int *p = (unsigned int *) &frame[*frameUsed];
-	unsigned int data = expand_data;
-	unsigned short *up = (unsigned short *) userPtr;
-	int bal = expand_bal;
-	int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed;
-	int stereo = sound.soft.stereo;
-	int utotal, ftotal;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	ftotal = frameLeft;
-	utotal = userCount;
-	while (frameLeft) {
-		unsigned short c;
-		if (bal < 0) {
-			if (userCount == 0)
-				break;
-			if (get_user(data, up++))
-				return -EFAULT;
-			data ^= mask;
-			if (stereo) {
-				if (get_user(c, up++))
-					return -EFAULT;
-				data = (data << 16) + (c ^ mask);
-			} else
-				data = (data << 16) + data;
-			userCount--;
-			bal += hSpeed;
-		}
-		*p++ = data;
-		frameLeft--;
-		bal -= sSpeed;
-	}
-	expand_bal = bal;
-	expand_data = data;
-	*frameUsed += (ftotal - frameLeft) * 4;
-	utotal -= userCount;
-	return stereo? utotal * 4: utotal * 2;
-}
-
-static ssize_t cs4218_ct_s8_read(const u_char *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = sound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-
-		val = *p++;
-		data = val >> 8;
-		if (put_user(data, (u_char *)userPtr++))
-			return -EFAULT;
-		if (stereo) {
-			val = *p;
-			data = val >> 8;
-			if (put_user(data, (u_char *)userPtr++))
-				return -EFAULT;
-		}
-		p++;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t cs4218_ct_u8_read(const u_char *userPtr, size_t userCount,
-			  u_char frame[], ssize_t *frameUsed,
-			  ssize_t frameLeft)
-{
-	ssize_t count, used;
-	short *p = (short *) &frame[*frameUsed];
-	int val, stereo = sound.soft.stereo;
-
-	frameLeft >>= 2;
-	if (stereo)
-		userCount >>= 1;
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		u_char data;
-
-		val = *p++;
-		data = (val >> 8) ^ 0x80;
-		if (put_user(data, (u_char *)userPtr++))
-			return -EFAULT;
-		if (stereo) {
-			val = *p;
-			data = (val >> 8) ^ 0x80;
-			if (put_user(data, (u_char *)userPtr++))
-				return -EFAULT;
-		}
-		p++;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 2: used;
-}
-
-
-static ssize_t cs4218_ct_s16_read(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int stereo = sound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min(userCount, frameLeft);
-	if (!stereo) {
-		short *up = (short *) userPtr;
-		while (count > 0) {
-			short data;
-			data = *fp;
-			if (put_user(data, up++))
-				return -EFAULT;
-			fp+=2;
-			count--;
-		}
-	} else {
-		if (copy_to_user((u_char *)userPtr, fp, count * 4))
-			return -EFAULT;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-static ssize_t cs4218_ct_u16_read(const u_char *userPtr, size_t userCount,
-			   u_char frame[], ssize_t *frameUsed,
-			   ssize_t frameLeft)
-{
-	ssize_t count, used;
-	int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000);
-	int stereo = sound.soft.stereo;
-	short *fp = (short *) &frame[*frameUsed];
-	short *up = (short *) userPtr;
-
-	frameLeft >>= 2;
-	userCount >>= (stereo? 2: 1);
-	used = count = min(userCount, frameLeft);
-	while (count > 0) {
-		int data;
-
-		data = *fp++;
-		data ^= mask;
-		if (put_user(data, up++))
-			return -EFAULT;
-		if (stereo) {
-			data = *fp;
-			data ^= mask;
-			if (put_user(data, up++))
-				return -EFAULT;
-		}
-		fp++;
-		count--;
-	}
-	*frameUsed += used * 4;
-	return stereo? used * 4: used * 2;
-}
-
-static TRANS transCSNormal = {
-	cs4218_ct_law, cs4218_ct_law, cs4218_ct_s8, cs4218_ct_u8,
-	cs4218_ct_s16, cs4218_ct_u16, cs4218_ct_s16, cs4218_ct_u16
-};
-
-static TRANS transCSExpand = {
-	cs4218_ctx_law, cs4218_ctx_law, cs4218_ctx_s8, cs4218_ctx_u8,
-	cs4218_ctx_s16, cs4218_ctx_u16, cs4218_ctx_s16, cs4218_ctx_u16
-};
-
-static TRANS transCSNormalRead = {
-	NULL, NULL, cs4218_ct_s8_read, cs4218_ct_u8_read,
-	cs4218_ct_s16_read, cs4218_ct_u16_read,
-	cs4218_ct_s16_read, cs4218_ct_u16_read
-};
-
-/*** Low level stuff *********************************************************/
-
-static void *CS_Alloc(unsigned int size, gfp_t flags)
-{
-	int	order;
-
-	size >>= 13;
-	for (order=0; order < 5; order++) {
-		if (size == 0)
-			break;
-		size >>= 1;
-	}
-	return (void *)__get_free_pages(flags, order);
-}
-
-static void CS_Free(void *ptr, unsigned int size)
-{
-	int	order;
-
-	size >>= 13;
-	for (order=0; order < 5; order++) {
-		if (size == 0)
-			break;
-		size >>= 1;
-	}
-	free_pages((ulong)ptr, order);
-}
-
-static int __init CS_IrqInit(void)
-{
-	cpm_install_handler(CPMVEC_SMC2, cs4218_intr, NULL);
-	return 1;
-}
-
-#ifdef MODULE
-static void CS_IrqCleanup(void)
-{
-	volatile smc_t		*sp;
-	volatile cpm8xx_t	*cp;
-
-	/* First disable transmitter and receiver.
-	*/
-	sp = &cpmp->cp_smc[1];
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-	/* And now shut down the SMC.
-	*/
-	cp = cpmp;	/* Get pointer to Communication Processor */
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
-				CPM_CR_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Release the interrupt handler.
-	*/
-	cpm_free_handler(CPMVEC_SMC2);
-
-	kfree(beep_buf);
-	kd_mksound = orig_mksound;
-}
-#endif /* MODULE */
-
-static void CS_Silence(void)
-{
-	volatile smc_t		*sp;
-
-	/* Disable transmitter.
-	*/
-	sp = &cpmp->cp_smc[1];
-	sp->smc_smcmr &= ~SMCMR_TEN;
-}
-
-/* Frequencies depend upon external oscillator.  There are two
- * choices, 12.288 and 11.2896 MHz.  The RPCG audio supports both through
- * and external control register selection bit.
- */
-static int cs4218_freqs[] = {
-    /* 12.288  11.2896  */
-	48000, 44100,
-	32000, 29400,
-	24000, 22050,
-	19200, 17640,
-	16000, 14700,
-	12000, 11025,
-	 9600,  8820,
-	 8000,  7350
-};
-
-static void CS_Init(void)
-{
-	int i, tolerance;
-
-	switch (sound.soft.format) {
-	case AFMT_S16_LE:
-	case AFMT_U16_LE:
-		sound.hard.format = AFMT_S16_LE;
-		break;
-	default:
-		sound.hard.format = AFMT_S16_BE;
-		break;
-	}
-	sound.hard.stereo = 1;
-	sound.hard.size = 16;
-
-	/*
-	 * If we have a sample rate which is within catchRadius percent
-	 * of the requested value, we don't have to expand the samples.
-	 * Otherwise choose the next higher rate.
-	 */
-	i = (sizeof(cs4218_freqs) / sizeof(int));
-	do {
-		tolerance = catchRadius * cs4218_freqs[--i] / 100;
-	} while (sound.soft.speed > cs4218_freqs[i] + tolerance && i > 0);
-	if (sound.soft.speed >= cs4218_freqs[i] - tolerance)
-		sound.trans_write = &transCSNormal;
-	else
-		sound.trans_write = &transCSExpand;
-	sound.trans_read = &transCSNormalRead;
-	sound.hard.speed = cs4218_freqs[i];
-	cs4218_rate_index = i;
-
-	/* The CS4218 has seven selectable clock dividers for the sample
-	 * clock.  The HIOX then provides one of two external rates.
-	 * An even numbered frequency table index uses the high external
-	 * clock rate.
-	 */
-	*(uint *)HIOX_CSR4_ADDR &= ~(HIOX_CSR4_AUDCLKHI | HIOX_CSR4_AUDCLKSEL);
-	if ((i & 1) == 0)
-		*(uint *)HIOX_CSR4_ADDR |= HIOX_CSR4_AUDCLKHI;
-	i >>= 1;
-	*(uint *)HIOX_CSR4_ADDR |= (i & HIOX_CSR4_AUDCLKSEL);
-
-	expand_bal = -sound.soft.speed;
-}
-
-static int CS_SetFormat(int format)
-{
-	int size;
-
-	switch (format) {
-	case AFMT_QUERY:
-		return sound.soft.format;
-	case AFMT_MU_LAW:
-	case AFMT_A_LAW:
-	case AFMT_U8:
-	case AFMT_S8:
-		size = 8;
-		break;
-	case AFMT_S16_BE:
-	case AFMT_U16_BE:
-	case AFMT_S16_LE:
-	case AFMT_U16_LE:
-		size = 16;
-		break;
-	default: /* :-) */
-		printk(KERN_ERR "dmasound: unknown format 0x%x, using AFMT_U8\n",
-		       format);
-		size = 8;
-		format = AFMT_U8;
-	}
-
-	sound.soft.format = format;
-	sound.soft.size = size;
-	if (sound.minDev == SND_DEV_DSP) {
-		sound.dsp.format = format;
-		sound.dsp.size = size;
-	}
-
-	CS_Init();
-
-	return format;
-}
-
-/* Volume is the amount of attenuation we tell the codec to impose
- * on the outputs.  There are 32 levels, with 0 the "loudest".
- */
-#define CS_VOLUME_TO_MASK(x)	(31 - ((((x) - 1) * 31) / 99))
-#define CS_MASK_TO_VOLUME(y)	(100 - ((y) * 99 / 31))
-
-static int cs_get_volume(uint reg)
-{
-	int volume;
-
-	volume = CS_MASK_TO_VOLUME(CS_LATTEN_GET(reg));
-	volume |= CS_MASK_TO_VOLUME(CS_RATTEN_GET(reg)) << 8;
-	return volume;
-}
-
-static int cs_volume_setter(int volume, int mute)
-{
-	uint tempctl;
-
-	if (mute && volume == 0) {
-		tempctl = cs4218_control | CS_MUTE;
-	} else {
-		tempctl = cs4218_control & ~CS_MUTE;
-		tempctl = tempctl & ~(CS_LATTEN | CS_RATTEN);
-		tempctl |= CS_LATTEN_SET(CS_VOLUME_TO_MASK(volume & 0xff));
-		tempctl |= CS_RATTEN_SET(CS_VOLUME_TO_MASK((volume >> 8) & 0xff));
-		volume = cs_get_volume(tempctl);
-	}
-	if (tempctl != cs4218_control) {
-		cs4218_ctl_write(tempctl);
-	}
-	return volume;
-}
-
-
-/* Gain has 16 steps from 0 to 15.  These are in 1.5dB increments from
- * 0 (no gain) to 22.5 dB.
- */
-#define CS_RECLEVEL_TO_GAIN(v) \
-	((v) < 0 ? 0 : (v) > 100 ? 15 : (v) * 3 / 20)
-#define CS_GAIN_TO_RECLEVEL(v) (((v) * 20 + 2) / 3)
-
-static int cs_get_gain(uint reg)
-{
-	int gain;
-
-	gain = CS_GAIN_TO_RECLEVEL(CS_LGAIN_GET(reg));
-	gain |= CS_GAIN_TO_RECLEVEL(CS_RGAIN_GET(reg)) << 8;
-	return gain;
-}
-
-static int cs_set_gain(int gain)
-{
-	uint tempctl;
-
-	tempctl = cs4218_control & ~(CS_LGAIN | CS_RGAIN);
-	tempctl |= CS_LGAIN_SET(CS_RECLEVEL_TO_GAIN(gain & 0xff));
-	tempctl |= CS_RGAIN_SET(CS_RECLEVEL_TO_GAIN((gain >> 8) & 0xff));
-	gain = cs_get_gain(tempctl);
-
-	if (tempctl != cs4218_control) {
-		cs4218_ctl_write(tempctl);
-	}
-	return gain;
-}
-
-static int CS_SetVolume(int volume)
-{
-	return cs_volume_setter(volume, CS_MUTE);
-}
-
-static void CS_Play(void)
-{
-	int i, count;
-	unsigned long flags;
-	volatile cbd_t	*bdp;
-	volatile cpm8xx_t *cp;
-
-	/* Protect buffer */
-	spin_lock_irqsave(&cs4218_lock, flags);
-#if 0
-	if (awacs_beep_state) {
-		/* sound takes precedence over beeps */
-		out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16);
-		out_le32(&awacs->control,
-			 (in_le32(&awacs->control) & ~0x1f00)
-			 | (awacs_rate_index << 8));
-		out_le32(&awacs->byteswap, sound.hard.format != AFMT_S16_BE);
-		out_le32(&awacs_txdma->cmdptr, virt_to_bus(&(awacs_tx_cmds[(sq.front+sq.active) % sq.max_count])));
-
-		beep_playing = 0;
-		awacs_beep_state = 0;
-	}
-#endif
-	i = sq.front + sq.active;
-	if (i >= sq.max_count)
-		i -= sq.max_count;
-	while (sq.active < 2 && sq.active < sq.count) {
-		count = (sq.count == sq.active + 1)?sq.rear_size:sq.block_size;
-		if (count < sq.block_size && !sq.syncing)
-			/* last block not yet filled, and we're not syncing. */
-			break;
-
-		bdp = &tx_base[i];
-		bdp->cbd_datlen = count;
-
-		flush_dcache_range((ulong)sound_buffers[i],
-					(ulong)(sound_buffers[i] + count));
-
-		if (++i >= sq.max_count)
-			i = 0;
-
-		if (sq.active == 0) {
-			/* The SMC does not load its fifo until the first
-			 * TDM frame pulse, so the transmit data gets shifted
-			 * by one word.  To compensate for this, we incorrectly
-			 * transmit the first buffer and shorten it by one
-			 * word.  Subsequent buffers are then aligned properly.
-			 */
-			bdp->cbd_datlen -= 2;
-
-			/* Start up the SMC Transmitter.
-			*/
-			cp = cpmp;
-			cp->cp_smc[1].smc_smcmr |= SMCMR_TEN;
-			cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
-					CPM_CR_RESTART_TX) | CPM_CR_FLG;
-			while (cp->cp_cpcr & CPM_CR_FLG);
-		}
-
-		/* Buffer is ready now.
-		*/
-		bdp->cbd_sc |= BD_SC_READY;
-
-		++sq.active;
-	}
-	spin_unlock_irqrestore(&cs4218_lock, flags);
-}
-
-
-static void CS_Record(void)
-{
-	unsigned long flags;
-	volatile smc_t		*sp;
-
-	if (read_sq.active)
-		return;
-
-	/* Protect buffer */
-	spin_lock_irqsave(&cs4218_lock, flags);
-
-	/* This is all we have to do......Just start it up.
-	*/
-	sp = &cpmp->cp_smc[1];
-	sp->smc_smcmr |= SMCMR_REN;
-
-	read_sq.active = 1;
-
-        spin_unlock_irqrestore(&cs4218_lock, flags);
-}
-
-
-static void
-cs4218_tdm_tx_intr(void *devid)
-{
-	int i = sq.front;
-	volatile cbd_t *bdp;
-
-	while (sq.active > 0) {
-		bdp = &tx_base[i];
-		if (bdp->cbd_sc & BD_SC_READY)
-			break;	/* this frame is still going */
-		--sq.count;
-		--sq.active;
-		if (++i >= sq.max_count)
-			i = 0;
-	}
-	if (i != sq.front)
-		WAKE_UP(sq.action_queue);
-	sq.front = i;
-
-	CS_Play();
-
-	if (!sq.active)
-		WAKE_UP(sq.sync_queue);
-}
-
-
-static void
-cs4218_tdm_rx_intr(void *devid)
-{
-
-	/* We want to blow 'em off when shutting down.
-	*/
-	if (read_sq.active == 0)
-		return;
-
-	/* Check multiple buffers in case we were held off from
-	 * interrupt processing for a long time.  Geeze, I really hope
-	 * this doesn't happen.
-	 */
-	while ((rx_base[read_sq.rear].cbd_sc & BD_SC_EMPTY) == 0) {
-
-		/* Invalidate the data cache range for this buffer.
-		*/
-		invalidate_dcache_range(
-		    (uint)(sound_read_buffers[read_sq.rear]),
-		    (uint)(sound_read_buffers[read_sq.rear] + read_sq.block_size));
-
-		/* Make buffer available again and move on.
-		*/
-		rx_base[read_sq.rear].cbd_sc |= BD_SC_EMPTY;
-		read_sq.rear++;
-
-		/* Wrap the buffer ring.
-		*/
-		if (read_sq.rear >= read_sq.max_active)
-			read_sq.rear = 0;
-
-		/* If we have caught up to the front buffer, bump it.
-		 * This will cause weird (but not fatal) results if the
-		 * read loop is currently using this buffer.  The user is
-		 * behind in this case anyway, so weird things are going
-		 * to happen.
-		 */
-		if (read_sq.rear == read_sq.front) {
-			read_sq.front++;
-			if (read_sq.front >= read_sq.max_active)
-				read_sq.front = 0;
-		}
-	}
-
-	WAKE_UP(read_sq.action_queue);
-}
-
-static void cs_nosound(unsigned long xx)
-{
-	unsigned long flags;
-
-	/* not sure if this is needed, since hardware command is #if 0'd */
-	spin_lock_irqsave(&cs4218_lock, flags);
-	if (beep_playing) {
-#if 0
-		st_le16(&beep_dbdma_cmd->command, DBDMA_STOP);
-#endif
-		beep_playing = 0;
-	}
-	spin_unlock_irqrestore(&cs4218_lock, flags);
-}
-
-static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0);
-
-static void cs_mksound(unsigned int hz, unsigned int ticks)
-{
-	unsigned long flags;
-	int beep_speed = BEEP_SPEED;
-	int srate = cs4218_freqs[beep_speed];
-	int period, ncycles, nsamples;
-	int i, j, f;
-	short *p;
-	static int beep_hz_cache;
-	static int beep_nsamples_cache;
-	static int beep_volume_cache;
-
-	if (hz <= srate / BEEP_BUFLEN || hz > srate / 2) {
-#if 1
-		/* this is a hack for broken X server code */
-		hz = 750;
-		ticks = 12;
-#else
-		/* cancel beep currently playing */
-		awacs_nosound(0);
-		return;
-#endif
-	}
-	/* lock while modifying beep_timer */
-	spin_lock_irqsave(&cs4218_lock, flags);
-	del_timer(&beep_timer);
-	if (ticks) {
-		beep_timer.expires = jiffies + ticks;
-		add_timer(&beep_timer);
-	}
-	if (beep_playing || sq.active || beep_buf == NULL) {
-		spin_unlock_irqrestore(&cs4218_lock, flags);
-		return;		/* too hard, sorry :-( */
-	}
-	beep_playing = 1;
-#if 0
-	st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS);
-#endif
-	spin_unlock_irqrestore(&cs4218_lock, flags);
-
-	if (hz == beep_hz_cache && beep_volume == beep_volume_cache) {
-		nsamples = beep_nsamples_cache;
-	} else {
-		period = srate * 256 / hz;	/* fixed point */
-		ncycles = BEEP_BUFLEN * 256 / period;
-		nsamples = (period * ncycles) >> 8;
-		f = ncycles * 65536 / nsamples;
-		j = 0;
-		p = beep_buf;
-		for (i = 0; i < nsamples; ++i, p += 2) {
-			p[0] = p[1] = beep_wform[j >> 8] * beep_volume;
-			j = (j + f) & 0xffff;
-		}
-		beep_hz_cache = hz;
-		beep_volume_cache = beep_volume;
-		beep_nsamples_cache = nsamples;
-	}
-
-#if 0
-	st_le16(&beep_dbdma_cmd->req_count, nsamples*4);
-	st_le16(&beep_dbdma_cmd->xfer_status, 0);
-	st_le32(&beep_dbdma_cmd->cmd_dep, virt_to_bus(beep_dbdma_cmd));
-	st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf));
-	awacs_beep_state = 1;
-
-	spin_lock_irqsave(&cs4218_lock, flags);
-	if (beep_playing) {	/* i.e. haven't been terminated already */
-		out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16);
-		out_le32(&awacs->control,
-			 (in_le32(&awacs->control) & ~0x1f00)
-			 | (beep_speed << 8));
-		out_le32(&awacs->byteswap, 0);
-		out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd));
-		out_le32(&awacs_txdma->control, RUN | (RUN << 16));
-	}
-	spin_unlock_irqrestore(&cs4218_lock, flags);
-#endif
-}
-
-static MACHINE mach_cs4218 = {
-	.owner =	THIS_MODULE,
-	.name =		"HIOX CS4218",
-	.name2 =	"Built-in Sound",
-	.dma_alloc =	CS_Alloc,
-	.dma_free =	CS_Free,
-	.irqinit =	CS_IrqInit,
-#ifdef MODULE
-	.irqcleanup =	CS_IrqCleanup,
-#endif /* MODULE */
-	.init =		CS_Init,
-	.silence =	CS_Silence,
-	.setFormat =	CS_SetFormat,
-	.setVolume =	CS_SetVolume,
-	.play =		CS_Play
-};
-
-
-/*** Mid level stuff *********************************************************/
-
-
-static void sound_silence(void)
-{
-	/* update hardware settings one more */
-	(*sound.mach.init)();
-
-	(*sound.mach.silence)();
-}
-
-
-static void sound_init(void)
-{
-	(*sound.mach.init)();
-}
-
-
-static int sound_set_format(int format)
-{
-	return(*sound.mach.setFormat)(format);
-}
-
-
-static int sound_set_speed(int speed)
-{
-	if (speed < 0)
-		return(sound.soft.speed);
-
-	sound.soft.speed = speed;
-	(*sound.mach.init)();
-	if (sound.minDev == SND_DEV_DSP)
-		sound.dsp.speed = sound.soft.speed;
-
-	return(sound.soft.speed);
-}
-
-
-static int sound_set_stereo(int stereo)
-{
-	if (stereo < 0)
-		return(sound.soft.stereo);
-
-	stereo = !!stereo;    /* should be 0 or 1 now */
-
-	sound.soft.stereo = stereo;
-	if (sound.minDev == SND_DEV_DSP)
-		sound.dsp.stereo = stereo;
-	(*sound.mach.init)();
-
-	return(stereo);
-}
-
-
-static int sound_set_volume(int volume)
-{
-	return(*sound.mach.setVolume)(volume);
-}
-
-static ssize_t sound_copy_translate(const u_char *userPtr,
-				    size_t userCount,
-				    u_char frame[], ssize_t *frameUsed,
-				    ssize_t frameLeft)
-{
-	ssize_t (*ct_func)(const u_char *, size_t, u_char *, ssize_t *, ssize_t) = NULL;
-
-	switch (sound.soft.format) {
-	case AFMT_MU_LAW:
-		ct_func = sound.trans_write->ct_ulaw;
-		break;
-	case AFMT_A_LAW:
-		ct_func = sound.trans_write->ct_alaw;
-		break;
-	case AFMT_S8:
-		ct_func = sound.trans_write->ct_s8;
-		break;
-	case AFMT_U8:
-		ct_func = sound.trans_write->ct_u8;
-		break;
-	case AFMT_S16_BE:
-		ct_func = sound.trans_write->ct_s16be;
-		break;
-	case AFMT_U16_BE:
-		ct_func = sound.trans_write->ct_u16be;
-		break;
-	case AFMT_S16_LE:
-		ct_func = sound.trans_write->ct_s16le;
-		break;
-	case AFMT_U16_LE:
-		ct_func = sound.trans_write->ct_u16le;
-		break;
-	}
-	if (ct_func)
-		return ct_func(userPtr, userCount, frame, frameUsed, frameLeft);
-	else
-		return 0;
-}
-
-static ssize_t sound_copy_translate_read(const u_char *userPtr,
-				    size_t userCount,
-				    u_char frame[], ssize_t *frameUsed,
-				    ssize_t frameLeft)
-{
-	ssize_t (*ct_func)(const u_char *, size_t, u_char *, ssize_t *, ssize_t) = NULL;
-
-	switch (sound.soft.format) {
-	case AFMT_MU_LAW:
-		ct_func = sound.trans_read->ct_ulaw;
-		break;
-	case AFMT_A_LAW:
-		ct_func = sound.trans_read->ct_alaw;
-		break;
-	case AFMT_S8:
-		ct_func = sound.trans_read->ct_s8;
-		break;
-	case AFMT_U8:
-		ct_func = sound.trans_read->ct_u8;
-		break;
-	case AFMT_S16_BE:
-		ct_func = sound.trans_read->ct_s16be;
-		break;
-	case AFMT_U16_BE:
-		ct_func = sound.trans_read->ct_u16be;
-		break;
-	case AFMT_S16_LE:
-		ct_func = sound.trans_read->ct_s16le;
-		break;
-	case AFMT_U16_LE:
-		ct_func = sound.trans_read->ct_u16le;
-		break;
-	}
-	if (ct_func)
-		return ct_func(userPtr, userCount, frame, frameUsed, frameLeft);
-	else
-		return 0;
-}
-
-
-/*
- * /dev/mixer abstraction
- */
-
-static int mixer_open(struct inode *inode, struct file *file)
-{
-	mixer.busy = 1;
-	return nonseekable_open(inode, file);
-}
-
-
-static int mixer_release(struct inode *inode, struct file *file)
-{
-	mixer.busy = 0;
-	return 0;
-}
-
-
-static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		       u_long arg)
-{
-	int data;
-	uint tmpcs;
-
-	if (_SIOC_DIR(cmd) & _SIOC_WRITE)
-	    mixer.modify_counter++;
-	if (cmd == OSS_GETVERSION)
-	    return IOCTL_OUT(arg, SOUND_VERSION);
-	switch (cmd) {
-		case SOUND_MIXER_INFO: {
-		    mixer_info info;
-		    strlcpy(info.id, "CS4218_TDM", sizeof(info.id));
-		    strlcpy(info.name, "CS4218_TDM", sizeof(info.name));
-		    info.name[sizeof(info.name)-1] = 0;
-		    info.modify_counter = mixer.modify_counter;
-		    if (copy_to_user((int *)arg, &info, sizeof(info)))
-		    		return -EFAULT;
-		    return 0;
-		}
-		case SOUND_MIXER_READ_DEVMASK:
-			data = SOUND_MASK_VOLUME | SOUND_MASK_LINE
-				| SOUND_MASK_MIC | SOUND_MASK_RECLEV
-				| SOUND_MASK_ALTPCM;
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_READ_RECMASK:
-			data = SOUND_MASK_LINE | SOUND_MASK_MIC;
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_READ_RECSRC:
-			if (cs4218_control & CS_DO1)
-				data = SOUND_MASK_LINE;
-			else
-				data = SOUND_MASK_MIC;
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_WRITE_RECSRC:
-			IOCTL_IN(arg, data);
-			data &= (SOUND_MASK_LINE | SOUND_MASK_MIC);
-			if (data & SOUND_MASK_LINE)
-				tmpcs = cs4218_control |
-						(CS_ISL | CS_ISR | CS_DO1);
-			if (data & SOUND_MASK_MIC)
-				tmpcs = cs4218_control &
-						~(CS_ISL | CS_ISR | CS_DO1);
-			if (tmpcs != cs4218_control)
-				cs4218_ctl_write(tmpcs);
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_READ_STEREODEVS:
-			data = SOUND_MASK_VOLUME | SOUND_MASK_RECLEV;
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_READ_CAPS:
-			return IOCTL_OUT(arg, 0);
-		case SOUND_MIXER_READ_VOLUME:
-			data = (cs4218_control & CS_MUTE)? 0:
-				cs_get_volume(cs4218_control);
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_WRITE_VOLUME:
-			IOCTL_IN(arg, data);
-			return IOCTL_OUT(arg, sound_set_volume(data));
-		case SOUND_MIXER_WRITE_ALTPCM:	/* really bell volume */
-			IOCTL_IN(arg, data);
-			beep_volume = data & 0xff;
-			/* fall through */
-		case SOUND_MIXER_READ_ALTPCM:
-			return IOCTL_OUT(arg, beep_volume);
-		case SOUND_MIXER_WRITE_RECLEV:
-			IOCTL_IN(arg, data);
-			data = cs_set_gain(data);
-			return IOCTL_OUT(arg, data);
-		case SOUND_MIXER_READ_RECLEV:
-			data = cs_get_gain(cs4218_control);
-			return IOCTL_OUT(arg, data);
-	}
-
-	return -EINVAL;
-}
-
-
-static const struct file_operations mixer_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	sound_lseek,
-	.ioctl =	mixer_ioctl,
-	.open =		mixer_open,
-	.release =	mixer_release,
-};
-
-
-static void __init mixer_init(void)
-{
-	mixer_unit = register_sound_mixer(&mixer_fops, -1);
-	if (mixer_unit < 0)
-		return;
-
-	mixer.busy = 0;
-	sound.treble = 0;
-	sound.bass = 0;
-
-	/* Set Line input, no gain, no attenuation.
-	*/
-	cs4218_control = CS_ISL | CS_ISR | CS_DO1;
-	cs4218_control |= CS_LGAIN_SET(0) | CS_RGAIN_SET(0);
-	cs4218_control |= CS_LATTEN_SET(0) | CS_RATTEN_SET(0);
-	cs4218_ctl_write(cs4218_control);
-}
-
-
-/*
- * Sound queue stuff, the heart of the driver
- */
-
-
-static int sq_allocate_buffers(void)
-{
-	int i;
-
-	if (sound_buffers)
-		return 0;
-	sound_buffers = kmalloc (numBufs * sizeof(char *), GFP_KERNEL);
-	if (!sound_buffers)
-		return -ENOMEM;
-	for (i = 0; i < numBufs; i++) {
-		sound_buffers[i] = sound.mach.dma_alloc (bufSize << 10, GFP_KERNEL);
-		if (!sound_buffers[i]) {
-			while (i--)
-				sound.mach.dma_free (sound_buffers[i], bufSize << 10);
-			kfree (sound_buffers);
-			sound_buffers = 0;
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-
-static void sq_release_buffers(void)
-{
-	int i;
-
-	if (sound_buffers) {
-		for (i = 0; i < numBufs; i++)
-			sound.mach.dma_free (sound_buffers[i], bufSize << 10);
-		kfree (sound_buffers);
-		sound_buffers = 0;
-	}
-}
-
-
-static int sq_allocate_read_buffers(void)
-{
-	int i;
-
-	if (sound_read_buffers)
-		return 0;
-	sound_read_buffers = kmalloc(numReadBufs * sizeof(char *), GFP_KERNEL);
-	if (!sound_read_buffers)
-		return -ENOMEM;
-	for (i = 0; i < numBufs; i++) {
-		sound_read_buffers[i] = sound.mach.dma_alloc (readbufSize<<10,
-							      GFP_KERNEL);
-		if (!sound_read_buffers[i]) {
-			while (i--)
-				sound.mach.dma_free (sound_read_buffers[i],
-						     readbufSize << 10);
-			kfree (sound_read_buffers);
-			sound_read_buffers = 0;
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
-static void sq_release_read_buffers(void)
-{
-	int i;
-
-	if (sound_read_buffers) {
-		cpmp->cp_smc[1].smc_smcmr &= ~SMCMR_REN;
-		for (i = 0; i < numReadBufs; i++)
-			sound.mach.dma_free (sound_read_buffers[i],
-					     bufSize << 10);
-		kfree (sound_read_buffers);
-		sound_read_buffers = 0;
-	}
-}
-
-
-static void sq_setup(int numBufs, int bufSize, char **write_buffers)
-{
-	int i;
-	volatile cbd_t *bdp;
-	volatile cpm8xx_t	*cp;
-	volatile smc_t	*sp;
-
-	/* Make sure the SMC transmit is shut down.
-	*/
-	cp = cpmp;
-	sp = &cpmp->cp_smc[1];
-	sp->smc_smcmr &= ~SMCMR_TEN;
-
-	sq.max_count = numBufs;
-	sq.max_active = numBufs;
-	sq.block_size = bufSize;
-	sq.buffers = write_buffers;
-
-	sq.front = sq.count = 0;
-	sq.rear = -1;
-	sq.syncing = 0;
-	sq.active = 0;
-
-	bdp = tx_base;
-	for (i=0; i<numBufs; i++) {
-		bdp->cbd_bufaddr = virt_to_bus(write_buffers[i]);
-		bdp++;
-	}
-
-	/* This causes the SMC to sync up with the first buffer again.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, CPM_CR_INIT_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-}
-
-static void read_sq_setup(int numBufs, int bufSize, char **read_buffers)
-{
-	int i;
-	volatile cbd_t *bdp;
-	volatile cpm8xx_t	*cp;
-	volatile smc_t	*sp;
-
-	/* Make sure the SMC receive is shut down.
-	*/
-	cp = cpmp;
-	sp = &cpmp->cp_smc[1];
-	sp->smc_smcmr &= ~SMCMR_REN;
-
-	read_sq.max_count = numBufs;
-	read_sq.max_active = numBufs;
-	read_sq.block_size = bufSize;
-	read_sq.buffers = read_buffers;
-
-	read_sq.front = read_sq.count = 0;
-	read_sq.rear = 0;
-	read_sq.rear_size = 0;
-	read_sq.syncing = 0;
-	read_sq.active = 0;
-
-	bdp = rx_base;
-	for (i=0; i<numReadBufs; i++) {
-		bdp->cbd_bufaddr = virt_to_bus(read_buffers[i]);
-		bdp->cbd_datlen = read_sq.block_size;
-		bdp++;
-	}
-
-	/* This causes the SMC to sync up with the first buffer again.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, CPM_CR_INIT_RX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-}
-
-
-static void sq_play(void)
-{
-	(*sound.mach.play)();
-}
-
-
-/* ++TeSche: radically changed this one too */
-
-static ssize_t sq_write(struct file *file, const char *src, size_t uLeft,
-			loff_t *ppos)
-{
-	ssize_t uWritten = 0;
-	u_char *dest;
-	ssize_t uUsed, bUsed, bLeft;
-
-	/* ++TeSche: Is something like this necessary?
-	 * Hey, that's an honest question! Or does any other part of the
-	 * filesystem already checks this situation? I really don't know.
-	 */
-	if (uLeft == 0)
-		return 0;
-
-	/* The interrupt doesn't start to play the last, incomplete frame.
-	 * Thus we can append to it without disabling the interrupts! (Note
-	 * also that sq.rear isn't affected by the interrupt.)
-	 */
-
-	if (sq.count > 0 && (bLeft = sq.block_size-sq.rear_size) > 0) {
-		dest = sq_block_address(sq.rear);
-		bUsed = sq.rear_size;
-		uUsed = sound_copy_translate(src, uLeft, dest, &bUsed, bLeft);
-		if (uUsed <= 0)
-			return uUsed;
-		src += uUsed;
-		uWritten += uUsed;
-		uLeft -= uUsed;
-		sq.rear_size = bUsed;
-	}
-
-	do {
-		while (sq.count == sq.max_active) {
-			sq_play();
-			if (NON_BLOCKING(sq.open_mode))
-				return uWritten > 0 ? uWritten : -EAGAIN;
-			SLEEP(sq.action_queue);
-			if (SIGNAL_RECEIVED)
-				return uWritten > 0 ? uWritten : -EINTR;
-		}
-
-		/* Here, we can avoid disabling the interrupt by first
-		 * copying and translating the data, and then updating
-		 * the sq variables. Until this is done, the interrupt
-		 * won't see the new frame and we can work on it
-		 * undisturbed.
-		 */
-
-		dest = sq_block_address((sq.rear+1) % sq.max_count);
-		bUsed = 0;
-		bLeft = sq.block_size;
-		uUsed = sound_copy_translate(src, uLeft, dest, &bUsed, bLeft);
-		if (uUsed <= 0)
-			break;
-		src += uUsed;
-		uWritten += uUsed;
-		uLeft -= uUsed;
-		if (bUsed) {
-			sq.rear = (sq.rear+1) % sq.max_count;
-			sq.rear_size = bUsed;
-			sq.count++;
-		}
-	} while (bUsed);   /* uUsed may have been 0 */
-
-	sq_play();
-
-	return uUsed < 0? uUsed: uWritten;
-}
-
-
-/***********/
-
-/* Here is how the values are used for reading.
- * The value 'active' simply indicates the DMA is running.  This is
- * done so the driver semantics are DMA starts when the first read is
- * posted.  The value 'front' indicates the buffer we should next
- * send to the user.  The value 'rear' indicates the buffer the DMA is
- * currently filling.  When 'front' == 'rear' the buffer "ring" is
- * empty (we always have an empty available).  The 'rear_size' is used
- * to track partial offsets into the current buffer.  Right now, I just keep
- * The DMA running.  If the reader can't keep up, the interrupt tosses
- * the oldest buffer.  We could also shut down the DMA in this case.
- */
-static ssize_t sq_read(struct file *file, char *dst, size_t uLeft,
-                       loff_t *ppos)
-{
-
-	ssize_t	uRead, bLeft, bUsed, uUsed;
-
-	if (uLeft == 0)
-		return 0;
-
-	if (!read_sq.active)
-		CS_Record();	/* Kick off the record process. */
-
-	uRead = 0;
-
-	/* Move what the user requests, depending upon other options.
-	*/
-	while (uLeft > 0) {
-
-		/* When front == rear, the DMA is not done yet.
-		*/
-		while (read_sq.front == read_sq.rear) {
-			if (NON_BLOCKING(read_sq.open_mode)) {
-			       return uRead > 0 ? uRead : -EAGAIN;
-			}
-			SLEEP(read_sq.action_queue);
-			if (SIGNAL_RECEIVED)
-				return uRead > 0 ? uRead : -EINTR;
-		}
-
-		/* The amount we move is either what is left in the
-		 * current buffer or what the user wants.
-		 */
-		bLeft = read_sq.block_size - read_sq.rear_size;
-		bUsed = read_sq.rear_size;
-		uUsed = sound_copy_translate_read(dst, uLeft,
-			read_sq.buffers[read_sq.front], &bUsed, bLeft);
-		if (uUsed <= 0)
-			return uUsed;
-		dst += uUsed;
-		uRead += uUsed;
-		uLeft -= uUsed;
-		read_sq.rear_size += bUsed;
-		if (read_sq.rear_size >= read_sq.block_size) {
-			read_sq.rear_size = 0;
-			read_sq.front++;
-			if (read_sq.front >= read_sq.max_active)
-				read_sq.front = 0;
-		}
-	}
-	return uRead;
-}
-
-static int sq_open(struct inode *inode, struct file *file)
-{
-	int rc = 0;
-
-	if (file->f_mode & FMODE_WRITE) {
-		if (sq.busy) {
-			rc = -EBUSY;
-			if (NON_BLOCKING(file->f_flags))
-				goto err_out;
-			rc = -EINTR;
-			while (sq.busy) {
-				SLEEP(sq.open_queue);
-				if (SIGNAL_RECEIVED)
-					goto err_out;
-			}
-		}
-		sq.busy = 1; /* Let's play spot-the-race-condition */
-
-		if (sq_allocate_buffers()) goto err_out_nobusy;
-
-		sq_setup(numBufs, bufSize<<10,sound_buffers);
-		sq.open_mode = file->f_mode;
-	}
-
-
-	if (file->f_mode & FMODE_READ) {
-		if (read_sq.busy) {
-			rc = -EBUSY;
-			if (NON_BLOCKING(file->f_flags))
-				goto err_out;
-			rc = -EINTR;
-			while (read_sq.busy) {
-				SLEEP(read_sq.open_queue);
-				if (SIGNAL_RECEIVED)
-					goto err_out;
-			}
-			rc = 0;
-		}
-		read_sq.busy = 1;
-		if (sq_allocate_read_buffers()) goto err_out_nobusy;
-
-		read_sq_setup(numReadBufs,readbufSize<<10, sound_read_buffers);
-		read_sq.open_mode = file->f_mode;
-	}
-
-	/* Start up the 4218 by:
-	 * Reset.
-	 * Enable, unreset.
-	 */
-	*((volatile uint *)HIOX_CSR4_ADDR) &= ~HIOX_CSR4_RSTAUDIO;
-	eieio();
-	*((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_ENAUDIO;
-	mdelay(50);
-	*((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_RSTAUDIO;
-
-	/* We need to send the current control word in case someone
-	 * opened /dev/mixer and changed things while we were shut
-	 * down.  Chances are good the initialization that follows
-	 * would have done this, but it is still possible it wouldn't.
-	 */
-	cs4218_ctl_write(cs4218_control);
-
-	sound.minDev = iminor(inode) & 0x0f;
-	sound.soft = sound.dsp;
-	sound.hard = sound.dsp;
-	sound_init();
-	if ((iminor(inode) & 0x0f) == SND_DEV_AUDIO) {
-		sound_set_speed(8000);
-		sound_set_stereo(0);
-		sound_set_format(AFMT_MU_LAW);
-	}
-
-	return nonseekable_open(inode, file);
-
-err_out_nobusy:
-	if (file->f_mode & FMODE_WRITE) {
-		sq.busy = 0;
-		WAKE_UP(sq.open_queue);
-	}
-	if (file->f_mode & FMODE_READ) {
-		read_sq.busy = 0;
-		WAKE_UP(read_sq.open_queue);
-	}
-err_out:
-	return rc;
-}
-
-
-static void sq_reset(void)
-{
-	sound_silence();
-	sq.active = 0;
-	sq.count = 0;
-	sq.front = (sq.rear+1) % sq.max_count;
-#if 0
-	init_tdm_buffers();
-#endif
-}
-
-
-static int sq_fsync(struct file *filp, struct dentry *dentry)
-{
-	int rc = 0;
-
-	sq.syncing = 1;
-	sq_play();	/* there may be an incomplete frame waiting */
-
-	while (sq.active) {
-		SLEEP(sq.sync_queue);
-		if (SIGNAL_RECEIVED) {
-			/* While waiting for audio output to drain, an
-			 * interrupt occurred.  Stop audio output immediately
-			 * and clear the queue. */
-			sq_reset();
-			rc = -EINTR;
-			break;
-		}
-	}
-
-	sq.syncing = 0;
-	return rc;
-}
-
-static int sq_release(struct inode *inode, struct file *file)
-{
-	int rc = 0;
-
-	if (sq.busy)
-		rc = sq_fsync(file, file->f_path.dentry);
-	sound.soft = sound.dsp;
-	sound.hard = sound.dsp;
-	sound_silence();
-
-	sq_release_read_buffers();
-	sq_release_buffers();
-
-	if (file->f_mode & FMODE_READ) {
-		read_sq.busy = 0;
-		WAKE_UP(read_sq.open_queue);
-	}
-
-	if (file->f_mode & FMODE_WRITE) {
-		sq.busy = 0;
-		WAKE_UP(sq.open_queue);
-	}
-
-	/* Shut down the SMC.
-	*/
-	cpmp->cp_smc[1].smc_smcmr &= ~(SMCMR_TEN | SMCMR_REN);
-
-	/* Shut down the codec.
-	*/
-	*((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_RSTAUDIO;
-	eieio();
-	*((volatile uint *)HIOX_CSR4_ADDR) &= ~HIOX_CSR4_ENAUDIO;
-
-	/* Wake up a process waiting for the queue being released.
-	 * Note: There may be several processes waiting for a call
-	 * to open() returning. */
-
-	return rc;
-}
-
-
-static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		    u_long arg)
-{
-	u_long fmt;
-	int data;
-#if 0
-	int size, nbufs;
-#else
-	int size;
-#endif
-
-	switch (cmd) {
-	case SNDCTL_DSP_RESET:
-		sq_reset();
-		return 0;
-	case SNDCTL_DSP_POST:
-	case SNDCTL_DSP_SYNC:
-		return sq_fsync(file, file->f_path.dentry);
-
-		/* ++TeSche: before changing any of these it's
-		 * probably wise to wait until sound playing has
-		 * settled down. */
-	case SNDCTL_DSP_SPEED:
-		sq_fsync(file, file->f_path.dentry);
-		IOCTL_IN(arg, data);
-		return IOCTL_OUT(arg, sound_set_speed(data));
-	case SNDCTL_DSP_STEREO:
-		sq_fsync(file, file->f_path.dentry);
-		IOCTL_IN(arg, data);
-		return IOCTL_OUT(arg, sound_set_stereo(data));
-	case SOUND_PCM_WRITE_CHANNELS:
-		sq_fsync(file, file->f_path.dentry);
-		IOCTL_IN(arg, data);
-		return IOCTL_OUT(arg, sound_set_stereo(data-1)+1);
-	case SNDCTL_DSP_SETFMT:
-		sq_fsync(file, file->f_path.dentry);
-		IOCTL_IN(arg, data);
-		return IOCTL_OUT(arg, sound_set_format(data));
-	case SNDCTL_DSP_GETFMTS:
-		fmt = 0;
-		if (sound.trans_write) {
-			if (sound.trans_write->ct_ulaw)
-				fmt |= AFMT_MU_LAW;
-			if (sound.trans_write->ct_alaw)
-				fmt |= AFMT_A_LAW;
-			if (sound.trans_write->ct_s8)
-				fmt |= AFMT_S8;
-			if (sound.trans_write->ct_u8)
-				fmt |= AFMT_U8;
-			if (sound.trans_write->ct_s16be)
-				fmt |= AFMT_S16_BE;
-			if (sound.trans_write->ct_u16be)
-				fmt |= AFMT_U16_BE;
-			if (sound.trans_write->ct_s16le)
-				fmt |= AFMT_S16_LE;
-			if (sound.trans_write->ct_u16le)
-				fmt |= AFMT_U16_LE;
-		}
-		return IOCTL_OUT(arg, fmt);
-	case SNDCTL_DSP_GETBLKSIZE:
-		size = sq.block_size
-			* sound.soft.size * (sound.soft.stereo + 1)
-			/ (sound.hard.size * (sound.hard.stereo + 1));
-		return IOCTL_OUT(arg, size);
-	case SNDCTL_DSP_SUBDIVIDE:
-		break;
-#if 0	/* Sorry can't do this at the moment.  The CPM allocated buffers
-	 * long ago that can't be changed.
-	 */
-	case SNDCTL_DSP_SETFRAGMENT:
-		if (sq.count || sq.active || sq.syncing)
-			return -EINVAL;
-		IOCTL_IN(arg, size);
-		nbufs = size >> 16;
-		if (nbufs < 2 || nbufs > numBufs)
-			nbufs = numBufs;
-		size &= 0xffff;
-		if (size >= 8 && size <= 30) {
-			size = 1 << size;
-			size *= sound.hard.size * (sound.hard.stereo + 1);
-			size /= sound.soft.size * (sound.soft.stereo + 1);
-			if (size > (bufSize << 10))
-				size = bufSize << 10;
-		} else
-			size = bufSize << 10;
-		sq_setup(numBufs, size, sound_buffers);
-		sq.max_active = nbufs;
-		return 0;
-#endif
-
-	default:
-		return mixer_ioctl(inode, file, cmd, arg);
-	}
-	return -EINVAL;
-}
-
-
-
-static const struct file_operations sq_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	sound_lseek,
-	.read =		sq_read,			/* sq_read */
-	.write =	sq_write,
-	.ioctl =	sq_ioctl,
-	.open =		sq_open,
-	.release =	sq_release,
-};
-
-
-static void __init sq_init(void)
-{
-	sq_unit = register_sound_dsp(&sq_fops, -1);
-	if (sq_unit < 0)
-		return;
-
-	init_waitqueue_head(&sq.action_queue);
-	init_waitqueue_head(&sq.open_queue);
-	init_waitqueue_head(&sq.sync_queue);
-	init_waitqueue_head(&read_sq.action_queue);
-	init_waitqueue_head(&read_sq.open_queue);
-	init_waitqueue_head(&read_sq.sync_queue);
-
-	sq.busy = 0;
-	read_sq.busy = 0;
-
-	/* whatever you like as startup mode for /dev/dsp,
-	 * (/dev/audio hasn't got a startup mode). note that
-	 * once changed a new open() will *not* restore these!
-	 */
-	sound.dsp.format = AFMT_S16_BE;
-	sound.dsp.stereo = 1;
-	sound.dsp.size = 16;
-
-	/* set minimum rate possible without expanding */
-	sound.dsp.speed = 8000;
-
-	/* before the first open to /dev/dsp this wouldn't be set */
-	sound.soft = sound.dsp;
-	sound.hard = sound.dsp;
-
-	sound_silence();
-}
-
-/*
- * /dev/sndstat
- */
-
-
-/* state.buf should not overflow! */
-
-static int state_open(struct inode *inode, struct file *file)
-{
-	char *buffer = state.buf, *mach = "", cs4218_buf[50];
-	int len = 0;
-
-	if (state.busy)
-		return -EBUSY;
-
-	state.ptr = 0;
-	state.busy = 1;
-
-	sprintf(cs4218_buf, "Crystal CS4218 on TDM, ");
-	mach = cs4218_buf;
-
-	len += sprintf(buffer+len, "%sDMA sound driver:\n", mach);
-
-	len += sprintf(buffer+len, "\tsound.format = 0x%x", sound.soft.format);
-	switch (sound.soft.format) {
-	case AFMT_MU_LAW:
-		len += sprintf(buffer+len, " (mu-law)");
-		break;
-	case AFMT_A_LAW:
-		len += sprintf(buffer+len, " (A-law)");
-		break;
-	case AFMT_U8:
-		len += sprintf(buffer+len, " (unsigned 8 bit)");
-		break;
-	case AFMT_S8:
-		len += sprintf(buffer+len, " (signed 8 bit)");
-		break;
-	case AFMT_S16_BE:
-		len += sprintf(buffer+len, " (signed 16 bit big)");
-		break;
-	case AFMT_U16_BE:
-		len += sprintf(buffer+len, " (unsigned 16 bit big)");
-		break;
-	case AFMT_S16_LE:
-		len += sprintf(buffer+len, " (signed 16 bit little)");
-		break;
-	case AFMT_U16_LE:
-		len += sprintf(buffer+len, " (unsigned 16 bit little)");
-		break;
-	}
-	len += sprintf(buffer+len, "\n");
-	len += sprintf(buffer+len, "\tsound.speed = %dHz (phys. %dHz)\n",
-		       sound.soft.speed, sound.hard.speed);
-	len += sprintf(buffer+len, "\tsound.stereo = 0x%x (%s)\n",
-		       sound.soft.stereo, sound.soft.stereo ? "stereo" : "mono");
-	len += sprintf(buffer+len, "\tsq.block_size = %d sq.max_count = %d"
-		       " sq.max_active = %d\n",
-		       sq.block_size, sq.max_count, sq.max_active);
-	len += sprintf(buffer+len, "\tsq.count = %d sq.rear_size = %d\n", sq.count,
-		       sq.rear_size);
-	len += sprintf(buffer+len, "\tsq.active = %d sq.syncing = %d\n",
-		       sq.active, sq.syncing);
-	state.len = len;
-	return nonseekable_open(inode, file);
-}
-
-
-static int state_release(struct inode *inode, struct file *file)
-{
-	state.busy = 0;
-	return 0;
-}
-
-
-static ssize_t state_read(struct file *file, char *buf, size_t count,
-			  loff_t *ppos)
-{
-	int n = state.len - state.ptr;
-	if (n > count)
-		n = count;
-	if (n <= 0)
-		return 0;
-	if (copy_to_user(buf, &state.buf[state.ptr], n))
-		return -EFAULT;
-	state.ptr += n;
-	return n;
-}
-
-
-static const struct file_operations state_fops =
-{
-	.owner =	THIS_MODULE,
-	.llseek =	sound_lseek,
-	.read =		state_read,
-	.open =		state_open,
-	.release =	state_release,
-};
-
-
-static void __init state_init(void)
-{
-	state_unit = register_sound_special(&state_fops, SND_DEV_STATUS);
-	if (state_unit < 0)
-		return;
-	state.busy = 0;
-}
-
-
-/*** Common stuff ********************************************************/
-
-static long long sound_lseek(struct file *file, long long offset, int orig)
-{
-	return -ESPIPE;
-}
-
-
-/*** Config & Setup **********************************************************/
-
-
-int __init tdm8xx_sound_init(void)
-{
-	int i, has_sound;
-	uint			dp_offset;
-	volatile uint		*sirp;
-	volatile cbd_t		*bdp;
-	volatile cpm8xx_t	*cp;
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-	volatile immap_t	*immap;
-
-	has_sound = 0;
-
-	/* Program the SI/TSA to use TDMa, connected to SMC2, for 4 bytes.
-	*/
-	cp = cpmp;	/* Get pointer to Communication Processor */
-	immap = (immap_t *)IMAP_ADDR;	/* and to internal registers */
-
-	/* Set all TDMa control bits to zero.  This enables most features
-	 * we want.
-	 */
-	cp->cp_simode &= ~0x00000fff;
-
-	/* Enable common receive/transmit clock pins, use IDL format.
-	 * Sync on falling edge, transmit rising clock, receive falling
-	 * clock, delay 1 bit on both Tx and Rx.  Common Tx/Rx clocks and
-	 * sync.
-	 * Connect SMC2 to TSA.
-	 */
-	cp->cp_simode |= 0x80000141;
-
-	/* Configure port A pins for TDMa operation.
-	 * The RPX-Lite (MPC850/823) loses SMC2 when TDM is used.
-	 */
-	immap->im_ioport.iop_papar |= 0x01c0; /* Enable TDMa functions */
-	immap->im_ioport.iop_padir |= 0x00c0; /* Enable TDMa Tx/Rx */
-	immap->im_ioport.iop_padir &= ~0x0100; /* Enable L1RCLKa */
-
-	immap->im_ioport.iop_pcpar |= 0x0800; /* Enable L1RSYNCa */
-	immap->im_ioport.iop_pcdir &= ~0x0800;
-
-	/* Initialize the SI TDM routing table.  We use TDMa only.
-	 * The receive table and transmit table each have only one
-	 * entry, to capture/send four bytes after each frame pulse.
-	 * The 16-bit ram entry is 0000 0001 1000 1111. (SMC2)
-	 */
-	cp->cp_sigmr = 0;
-	sirp = (uint *)cp->cp_siram;
-
-	*sirp = 0x018f0000;		/* Receive entry */
-	sirp += 64;
-	*sirp = 0x018f0000;		/* Tramsmit entry */
-
-	/* Enable single TDMa routing.
-	*/
-	cp->cp_sigmr = 0x04;
-
-	/* Initialize the SMC for transparent operation.
-	*/
-	sp = &cpmp->cp_smc[1];
-	up = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC2];
-
-	/* We need to allocate a transmit and receive buffer
-	 * descriptors from dual port ram.
-	 */
-	dp_addr = cpm_dpalloc(sizeof(cbd_t) * numReadBufs, 8);
-
-	/* Set the physical address of the host memory
-	 * buffers in the buffer descriptors, and the
-	 * virtual address for us to work with.
-	 */
-	bdp = (cbd_t *)&cp->cp_dpmem[dp_addr];
-	up->smc_rbase = dp_offset;
-	rx_cur = rx_base = (cbd_t *)bdp;
-
-	for (i=0; i<(numReadBufs-1); i++) {
-		bdp->cbd_bufaddr = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
-		bdp++;
-	}
-	bdp->cbd_bufaddr = 0;
-	bdp->cbd_datlen = 0;
-	bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
-
-	/* Now, do the same for the transmit buffers.
-	*/
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * numBufs, 8);
-
-	bdp = (cbd_t *)&cp->cp_dpmem[dp_addr];
-	up->smc_tbase = dp_offset;
-	tx_cur = tx_base = (cbd_t *)bdp;
-
-	for (i=0; i<(numBufs-1); i++) {
-		bdp->cbd_bufaddr = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_sc = BD_SC_INTRPT;
-		bdp++;
-	}
-	bdp->cbd_bufaddr = 0;
-	bdp->cbd_datlen = 0;
-	bdp->cbd_sc = (BD_SC_WRAP | BD_SC_INTRPT);
-
-	/* Set transparent SMC mode.
-	 * A few things are specific to our application.  The codec interface
-	 * is MSB first, hence the REVD selection.  The CD/CTS pulse are
-	 * used by the TSA to indicate the frame start to the SMC.
-	 */
-	up->smc_rfcr = SCC_EB;
-	up->smc_tfcr = SCC_EB;
-	up->smc_mrblr = readbufSize * 1024;
-
-	/* Set 16-bit reversed data, transparent mode.
-	*/
-	sp->smc_smcmr = smcr_mk_clen(15) |
-		SMCMR_SM_TRANS | SMCMR_REVD | SMCMR_BS;
-
-	/* Enable and clear events.
-	 * Because of FIFO delays, all we need is the receive interrupt
-	 * and we can process both the current receive and current
-	 * transmit interrupt within a few microseconds of the transmit.
-	 */
-	sp->smc_smce = 0xff;
-	sp->smc_smcm = SMCM_TXE | SMCM_TX | SMCM_RX;
-
-	/* Send the CPM an initialize command.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
-				CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	sound.mach = mach_cs4218;
-	has_sound = 1;
-
-	/* Initialize beep stuff */
-	orig_mksound = kd_mksound;
-	kd_mksound = cs_mksound;
-	beep_buf = kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL);
-	if (beep_buf == NULL)
-		printk(KERN_WARNING "dmasound: no memory for "
-		       "beep buffer\n");
-
-	if (!has_sound)
-		return -ENODEV;
-
-	/* Initialize the software SPI.
-	*/
-	sw_spi_init();
-
-	/* Set up sound queue, /dev/audio and /dev/dsp. */
-
-	/* Set default settings. */
-	sq_init();
-
-	/* Set up /dev/sndstat. */
-	state_init();
-
-	/* Set up /dev/mixer. */
-	mixer_init();
-
-	if (!sound.mach.irqinit()) {
-		printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n");
-		return -ENODEV;
-	}
-#ifdef MODULE
-	irq_installed = 1;
-#endif
-
-	printk(KERN_INFO "DMA sound driver installed, using %d buffers of %dk.\n",
-	       numBufs, bufSize);
-
-	return 0;
-}
-
-/* Due to FIFOs and bit delays, the transmit interrupt occurs a few
- * microseconds ahead of the receive interrupt.
- * When we get an interrupt, we service the transmit first, then
- * check for a receive to prevent the overhead of returning through
- * the interrupt handler only to get back here right away during
- * full duplex operation.
- */
-static void
-cs4218_intr(void *dev_id)
-{
-	volatile smc_t	*sp;
-	volatile cpm8xx_t	*cp;
-
-	sp = &cpmp->cp_smc[1];
-
-	if (sp->smc_smce & SCCM_TX) {
-		sp->smc_smce = SCCM_TX;
-		cs4218_tdm_tx_intr((void *)sp);
-	}
-
-	if (sp->smc_smce & SCCM_RX) {
-		sp->smc_smce = SCCM_RX;
-		cs4218_tdm_rx_intr((void *)sp);
-	}
-
-	if (sp->smc_smce & SCCM_TXE) {
-		/* Transmit underrun.  This happens with the application
-		 * didn't keep up sending buffers.  We tell the SMC to
-		 * restart, which will cause it to poll the current (next)
-		 * BD.  If the user supplied data since this occurred,
-		 * we just start running again.  If they didn't, the SMC
-		 * will poll the descriptor until data is placed there.
-		 */
-		sp->smc_smce = SCCM_TXE;
-		cp = cpmp;	/* Get pointer to Communication Processor */
-		cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2,
-					CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	}
-}
-
-
-#define MAXARGS		8	/* Should be sufficient for now */
-
-void __init dmasound_setup(char *str, int *ints)
-{
-	/* check the bootstrap parameter for "dmasound=" */
-
-	switch (ints[0]) {
-	case 3:
-		if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS))
-			printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
-		else
-			catchRadius = ints[3];
-		/* fall through */
-	case 2:
-		if (ints[1] < MIN_BUFFERS)
-			printk("dmasound_setup: invalid number of buffers, using default = %d\n", numBufs);
-		else
-			numBufs = ints[1];
-		if (ints[2] < MIN_BUFSIZE || ints[2] > MAX_BUFSIZE)
-			printk("dmasound_setup: invalid buffer size, using default = %d\n", bufSize);
-		else
-			bufSize = ints[2];
-		break;
-	case 0:
-		break;
-	default:
-		printk("dmasound_setup: invalid number of arguments\n");
-	}
-}
-
-/* Software SPI functions.
- * These are on Port B.
- */
-#define PB_SPICLK	((uint)0x00000002)
-#define PB_SPIMOSI	((uint)0x00000004)
-#define PB_SPIMISO	((uint)0x00000008)
-
-static
-void	sw_spi_init(void)
-{
-	volatile cpm8xx_t	*cp;
-	volatile uint		*hcsr4;
-
-	hcsr4 = (volatile uint *)HIOX_CSR4_ADDR;
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	*hcsr4 &= ~HIOX_CSR4_AUDSPISEL;	/* Disable SPI select */
-
-	/* Make these Port B signals general purpose I/O.
-	 * First, make sure the clock is low.
-	 */
-	cp->cp_pbdat &= ~PB_SPICLK;
-	cp->cp_pbpar &= ~(PB_SPICLK | PB_SPIMOSI | PB_SPIMISO);
-
-	/* Clock and Master Output are outputs.
-	*/
-	cp->cp_pbdir |= (PB_SPICLK | PB_SPIMOSI);
-
-	/* Master Input.
-	*/
-	cp->cp_pbdir &= ~PB_SPIMISO;
-
-}
-
-/* Write the CS4218 control word out the SPI port.  While the
- * the control word is going out, the status word is arriving.
- */
-static
-uint	cs4218_ctl_write(uint ctlreg)
-{
-	uint	status;
-
-	sw_spi_io((u_char *)&ctlreg, (u_char *)&status, 4);
-
-	/* Shadow the control register.....I guess we could do
-	 * the same for the status, but for now we just return it
-	 * and let the caller decide.
-	 */
-	cs4218_control = ctlreg;
-	return status;
-}
-
-static
-void	sw_spi_io(u_char *obuf, u_char *ibuf, uint bcnt)
-{
-	int	bits, i;
-	u_char	outbyte, inbyte;
-	volatile cpm8xx_t	*cp;
-	volatile uint		*hcsr4;
-
-	hcsr4 = (volatile uint *)HIOX_CSR4_ADDR;
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	/* The timing on the bus is pretty slow.  Code inefficiency
-	 * and eieio() is our friend here :-).
-	 */
-	cp->cp_pbdat &= ~PB_SPICLK;
-	*hcsr4 |= HIOX_CSR4_AUDSPISEL;	/* Enable SPI select */
-	eieio();
-
-	/* Clock in/out the bytes.  Data is valid on the falling edge
-	 * of the clock.  Data is MSB first.
-	 */
-	for (i=0; i<bcnt; i++) {
-		outbyte = *obuf++;
-		inbyte = 0;
-		for (bits=0; bits<8; bits++) {
-			eieio();
-			cp->cp_pbdat |= PB_SPICLK;
-			eieio();
-			if (outbyte & 0x80)
-				cp->cp_pbdat |= PB_SPIMOSI;
-			else
-				cp->cp_pbdat &= ~PB_SPIMOSI;
-			eieio();
-			cp->cp_pbdat &= ~PB_SPICLK;
-			eieio();
-			outbyte <<= 1;
-			inbyte <<= 1;
-			if (cp->cp_pbdat & PB_SPIMISO)
-				inbyte |= 1;
-		}
-		*ibuf++ = inbyte;
-	}
-
-	*hcsr4 &= ~HIOX_CSR4_AUDSPISEL;	/* Disable SPI select */
-	eieio();
-}
-
-void cleanup_module(void)
-{
-	if (irq_installed) {
-		sound_silence();
-#ifdef MODULE
-		sound.mach.irqcleanup();
-#endif
-	}
-
-	sq_release_read_buffers();
-	sq_release_buffers();
-
-	if (mixer_unit >= 0)
-		unregister_sound_mixer(mixer_unit);
-	if (state_unit >= 0)
-		unregister_sound_special(state_unit);
-	if (sq_unit >= 0)
-		unregister_sound_dsp(sq_unit);
-}
-
-module_init(tdm8xx_sound_init);
-module_exit(cleanup_module);
-
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
index b23c45bc151a..bfa3f52996d1 100644
--- a/arch/ppc/8xx_io/enet.c
+++ b/arch/ppc/8xx_io/enet.c
@@ -506,7 +506,6 @@ for (;;) {
 			cep->stats.rx_dropped++;
 		}
 		else {
-			skb->dev = dev;
 			skb_put(skb,pkt_len-4);	/* Make room */
 			eth_copy_and_sum(skb,
 				cep->rx_vaddr[bdp - cep->rx_bd_base],
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index e6c28fb423b2..57a9a61e54b5 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -724,7 +724,6 @@ while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
 		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
 		fep->stats.rx_dropped++;
 	} else {
-		skb->dev = dev;
 		skb_put(skb,pkt_len-4);	/* Make room */
 		eth_copy_and_sum(skb, data, pkt_len-4, 0);
 		skb->protocol=eth_type_trans(skb,dev);
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 0df9c33629fd..ccce2a4a1522 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -845,6 +845,21 @@ config MV64X60
 	select PPC_INDIRECT_PCI
 	default y
 
+config MV643XX_ETH_0
+	bool
+	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
+	default y
+
+config MV643XX_ETH_1
+	bool
+	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
+	default y
+
+config MV643XX_ETH_2
+	bool
+	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
+	default y
+
 menu "Set bridge options"
 	depends on MV64X60
 
diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c
index 8e1fccd96fc0..9589969cec72 100644
--- a/arch/ppc/boot/common/misc-common.c
+++ b/arch/ppc/boot/common/misc-common.c
@@ -57,7 +57,8 @@ unsigned char *ISA_io = NULL;
 
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
 	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
+	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 extern unsigned long com_port;
 
 extern int serial_tstc(unsigned long com_port);
@@ -80,7 +81,8 @@ int tstc(void)
 {
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
 	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
+	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 	if(keyb_present)
 		return (CRT_tstc() || serial_tstc(com_port));
 	else
@@ -95,7 +97,8 @@ int getc(void)
 	while (1) {
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
 	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
+	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 		if (serial_tstc(com_port))
 			return (serial_getc(com_port));
 #endif /* serial console */
@@ -112,7 +115,8 @@ putc(const char c)
 
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
 	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
+	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 	serial_putc(com_port, c);
 	if ( c == '\n' )
 		serial_putc(com_port, '\r');
@@ -161,7 +165,8 @@ void puts(const char *s)
 	while ( ( c = *s++ ) != '\0' ) {
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
 	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE)
+	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
+	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 	        serial_putc(com_port, c);
 	        if ( c == '\n' ) serial_putc(com_port, '\r');
 #endif /* serial console */
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index bcfb6cde70c4..5b877792d14f 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -201,6 +201,7 @@ boot-$(CONFIG_8260)		+= m8260_tty.o
 endif
 boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE)	+= mpc52xx_tty.o
 boot-$(CONFIG_SERIAL_MPSC_CONSOLE)	+= mv64x60_tty.o
+boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE)	+= uartlite_tty.o
 
 LIBS				:= $(common)/lib.a $(bootlib)/lib.a
 ifeq ($(CONFIG_PPC_PREP),y)
diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c
new file mode 100644
index 000000000000..0eae1eab38d4
--- /dev/null
+++ b/arch/ppc/boot/simple/uartlite_tty.c
@@ -0,0 +1,37 @@
+/*
+ * Xilinx UARTLITE bootloader driver
+ *
+ * Copyright (c) 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <asm/serial.h>
+#include <asm/io.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR))
+
+void
+serial_putc(unsigned long com_port, unsigned char c)
+{
+	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */
+	out_be32(UARTLITE_BASEADDR + 0x4, c);
+}
+
+unsigned char
+serial_getc(unsigned long com_port)
+{
+	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */
+	return in_be32(UARTLITE_BASEADDR);
+}
+
+int
+serial_tstc(unsigned long com_port)
+{
+	return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0);
+}
diff --git a/arch/ppc/configs/ads8272_defconfig b/arch/ppc/configs/ads8272_defconfig
index d1db7d14780e..6619f9118b00 100644
--- a/arch/ppc/configs/ads8272_defconfig
+++ b/arch/ppc/configs/ads8272_defconfig
@@ -1,42 +1,69 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21-rc5
+# Wed Apr  4 20:55:16 2007
 #
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -44,66 +71,124 @@ CONFIG_IOSCHED_CFQ=y
 # CONFIG_MODULES is not set
 
 #
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
 # Processor
 #
 CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_KEXEC is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_EMBEDDEDBOOT=y
 CONFIG_PPC_STD_MMU=y
 
 #
 # Platform options
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
+
+#
+# Freescale Ethernet driver platform-specific options
+#
+# CONFIG_PPC_PREP is not set
 # CONFIG_APUS is not set
+# CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
+# CONFIG_CPCI690 is not set
 # CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
+# CONFIG_CHESTNUT is not set
 # CONFIG_SPRUCE is not set
+# CONFIG_HDPU is not set
+# CONFIG_EV64260 is not set
 # CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
 # CONFIG_MVME5100 is not set
 # CONFIG_PPLUS is not set
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
+# CONFIG_RADSTONE_PPC7D is not set
 # CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
 # CONFIG_EST8260 is not set
 # CONFIG_SBC82xx is not set
 # CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
+# CONFIG_RPX8260 is not set
 # CONFIG_TQM8260 is not set
 CONFIG_ADS8272=y
+# CONFIG_PQ2FADS is not set
+# CONFIG_LITE5200 is not set
+# CONFIG_MPC834x_SYS is not set
+# CONFIG_EV64360 is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
 CONFIG_CPM2=y
 # CONFIG_PC_KEYBOARD is not set
-CONFIG_SERIAL_CONSOLE=y
 # CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
 # CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
+CONFIG_ZONE_DMA=y
+# CONFIG_PPC_I8259 is not set
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
+CONFIG_PCI_8260=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
 
 #
 # Advanced setup
@@ -120,12 +205,110 @@ CONFIG_TASK_SIZE=0x80000000
 CONFIG_BOOT_LOAD=0x00400000
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -140,6 +323,7 @@ CONFIG_BOOT_LOAD=0x00400000
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -149,14 +333,23 @@ CONFIG_BOOT_LOAD=0x00400000
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -166,7 +359,14 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -176,6 +376,7 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -190,70 +391,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_WINDFARM is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -266,13 +409,31 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
+CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -281,6 +442,9 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
 
 #
 # Ethernet (1000 Mbit)
@@ -292,14 +456,24 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -321,6 +495,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -336,6 +512,7 @@ CONFIG_NET_ETHERNET=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -347,14 +524,6 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
@@ -364,6 +533,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -377,10 +552,21 @@ CONFIG_SOUND_GAMEPORT=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+CONFIG_SERIAL_CPM_SCC4=y
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
 
 #
 # IPMI
@@ -391,29 +577,53 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 # CONFIG_I2C is not set
 
 #
-# Misc devices
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
@@ -428,7 +638,9 @@ CONFIG_GEN_RTC=y
 #
 # Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Sound
@@ -436,35 +648,110 @@ CONFIG_GEN_RTC=y
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
 #
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -475,7 +762,8 @@ CONFIG_FS_MBCACHE=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -483,12 +771,13 @@ CONFIG_FS_MBCACHE=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -511,20 +800,26 @@ CONFIG_RAMFS=y
 # Network File Systems
 #
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -537,46 +832,99 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
 # Native Language Support
 #
 # CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
 # CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
+# CONFIG_FEC_ENET is not set
 
 #
 # CPM2 Options
 #
-CONFIG_SCC_CONSOLE=y
-CONFIG_FCC1_ENET=y
-# CONFIG_FCC2_ENET is not set
-# CONFIG_FCC3_ENET is not set
 
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_PROFILING is not set
 
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_KGDB_CONSOLE is not set
 
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index 1f91eca2f3d7..c5850a272650 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -40,7 +40,6 @@ main(void)
 	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
-	DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall));
 	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
 	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
 	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index a9d455369dc6..ab64256110bd 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -191,7 +191,6 @@ stack_ovf:
 0:
 
 _GLOBAL(DoSyscall)
-	stw	r0,THREAD+LAST_SYSCALL(r2)
 	stw	r3,ORIG_GPR3(r1)
 	li	r12,0
 	stw	r12,RESULT(r1)
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 1318b6f4c3df..4ad499605d05 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -93,8 +93,6 @@ EXPORT_SYMBOL(strncpy);
 EXPORT_SYMBOL(strcat);
 EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strcasecmp);
-EXPORT_SYMBOL(strncasecmp);
 EXPORT_SYMBOL(__div64_32);
 
 EXPORT_SYMBOL(csum_partial);
diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile
index 50358e4ea159..422bef9bae7b 100644
--- a/arch/ppc/lib/Makefile
+++ b/arch/ppc/lib/Makefile
@@ -2,7 +2,7 @@
 # Makefile for ppc-specific library files..
 #
 
-obj-y			:= checksum.o string.o strcase.o div64.o
+obj-y			:= checksum.o string.o div64.o
 
 obj-$(CONFIG_8xx)	+= rheap.o
 obj-$(CONFIG_CPM2)	+= rheap.o
diff --git a/arch/ppc/lib/strcase.c b/arch/ppc/lib/strcase.c
deleted file mode 100644
index 3b0094cc2b52..000000000000
--- a/arch/ppc/lib/strcase.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <linux/ctype.h>
-#include <linux/types.h>
-
-int strcasecmp(const char *s1, const char *s2)
-{
-	int c1, c2;
-
-	do {
-		c1 = tolower(*s1++);
-		c2 = tolower(*s2++);
-	} while (c1 == c2 && c1 != 0);
-	return c1 - c2;
-}
-
-int strncasecmp(const char *s1, const char *s2, size_t n)
-{
-	int c1, c2;
-
-	do {
-		c1 = tolower(*s1++);
-		c2 = tolower(*s2++);
-	} while ((--n > 0) && c1 == c2 && c1 != 0);
-	return c1 - c2;
-}
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 705ae56016f0..76551b679030 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -29,6 +29,7 @@ config CPCI405
 
 config EP405
 	bool "EP405/EP405PC"
+	select EMBEDDEDBOOT
 	help
 	  This option enables support for the EP405/EP405PC boards.
 
@@ -54,11 +55,15 @@ config WALNUT
 
 config XILINX_ML300
 	bool "Xilinx-ML300"
+	select XILINX_VIRTEX_II_PRO
+	select EMBEDDEDBOOT
 	help
 	  This option enables support for the Xilinx ML300 evaluation board.
 
 config XILINX_ML403
 	bool "Xilinx-ML403"
+	select XILINX_VIRTEX_4_FX
+	select EMBEDDEDBOOT
 	help
 	  This option enables support for the Xilinx ML403 evaluation board.
 endchoice
@@ -215,18 +220,14 @@ config 405GPR
 
 config XILINX_VIRTEX_II_PRO
 	bool
-	depends on XILINX_ML300
-	default y
+	select XILINX_VIRTEX
 
 config XILINX_VIRTEX_4_FX
 	bool
-	depends on XILINX_ML403
-	default y
+	select XILINX_VIRTEX
 
 config XILINX_VIRTEX
 	bool
-	depends on XILINX_VIRTEX_II_PRO || XILINX_VIRTEX_4_FX
-	default y
 
 config STB03xxx
 	bool
@@ -235,8 +236,6 @@ config STB03xxx
 
 config EMBEDDEDBOOT
 	bool
-	depends on EP405 || XILINX_ML300 || XILINX_ML403
-	default y
 
 config IBM_OPENBIOS
 	bool
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index fa6610bccaf9..723ad7985cc6 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -28,5 +28,4 @@ obj-$(CONFIG_440SP)		+= ibm440sp.o
 obj-$(CONFIG_440SPE)		+= ppc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
-obj-$(CONFIG_XILINX_VIRTEX)	+= virtex.o
 
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 84e999d9a7bb..5e994e146ba8 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -178,7 +178,7 @@ ocotea_setup_pcix(void)
 	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
 	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
 	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
 
 	eieio();
 }
@@ -289,7 +289,7 @@ ocotea_setup_arch(void)
 	 * from FPGA, because it can be changed by on-board switches
 	 * --ebs
 	 */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200);
 	ocp_sys_info.opb_bus_freq = clocks.opb;
 
 	/* Setup TODC access */
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index bb0253eef45a..5d9af8ddb155 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -235,7 +235,7 @@ taishan_setup_pcix(void)
 	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
 	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
 	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
+	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
 	PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
 
 	iounmap(pcix_reg_base);
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
deleted file mode 100644
index 133a83147199..000000000000
--- a/arch/ppc/platforms/4xx/virtex.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Virtex-II Pro & Virtex-4 FX common infrastructure
- *
- * Maintainer: Grant Likely <grant.likely@secretlab.ca>
- *
- * Copyright 2005 Secret Lab Technologies Ltd.
- * Copyright 2005 General Dynamics Canada Ltd.
- * Copyright 2005 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <asm/ppc_sys.h>
-#include <platforms/4xx/virtex.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-#define XPAR_UART(num) { \
-		.mapbase  = XPAR_UARTNS550_##num##_BASEADDR + 3, \
-		.irq	  = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
-		.iotype	  = UPIO_MEM, \
-		.uartclk  = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
-		.flags	  = UPF_BOOT_AUTOCONF, \
-		.regshift = 2, \
-	}
-
-struct plat_serial8250_port serial_platform_data[] = {
-#ifdef XPAR_UARTNS550_0_BASEADDR
-	XPAR_UART(0),
-#endif
-#ifdef XPAR_UARTNS550_1_BASEADDR
-	XPAR_UART(1),
-#endif
-#ifdef XPAR_UARTNS550_2_BASEADDR
-	XPAR_UART(2),
-#endif
-#ifdef XPAR_UARTNS550_3_BASEADDR
-	XPAR_UART(3),
-#endif
-	{ }, /* terminated by empty record */
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[VIRTEX_UART] = {
-		.name		= "serial8250",
-		.id		= 0,
-		.dev.platform_data = serial_platform_data,
-	},
-};
-
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
index c14325dfd7b1..738280420be5 100644
--- a/arch/ppc/platforms/4xx/virtex.h
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -1,35 +1,35 @@
 /*
- * arch/ppc/platforms/4xx/virtex.h
+ * Basic Virtex platform defines, included by <asm/ibm4xx.h>
  *
- * Include file that defines the Xilinx Virtex-II Pro processor
+ * 2005-2007 (c) Secret Lab Technologies Ltd.
+ * 2002-2004 (c) MontaVista Software, Inc.
  *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __ASM_VIRTEX_H__
 #define __ASM_VIRTEX_H__
 
-/* serial defines */
-
 #include <asm/ibm405.h>
+#include <asm/ppcboot.h>
 
 /* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
 #if !defined(BASE_BAUD)
  #define BASE_BAUD		(0) /* dummy value; not used */
 #endif
-  
-/* Device type enumeration for platform bus definitions */
+
 #ifndef __ASSEMBLY__
-enum ppc_sys_devices {
-	VIRTEX_UART, NUM_PPC_SYS_DEVS,
-};
-#endif
-  
+extern const char* virtex_machine_name;
+#define PPC4xx_MACHINE_NAME (virtex_machine_name)
+#endif /* !__ASSEMBLY__ */
+
+/* We don't need anything mapped.  Size of zero will accomplish that. */
+#define PPC4xx_ONB_IO_PADDR	0u
+#define PPC4xx_ONB_IO_VADDR	0u
+#define PPC4xx_ONB_IO_SIZE	0u
+
 #endif				/* __ASM_VIRTEX_H__ */
 #endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
index fb5f0b5e13d1..6e522fefc26f 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -18,9 +18,9 @@
 #include <linux/serialP.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/ppc_sys.h>
 
 #include <syslib/gen550.h>
+#include <syslib/virtex_devices.h>
 #include <platforms/4xx/xparameters/xparameters.h>
 
 /*
@@ -53,24 +53,9 @@
  *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
  */
 
-/* Board specifications structures */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		/* Only one entry, always assume the same design */
-		.ppc_sys_name	= "Xilinx ML300 Reference Design",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-		.num_devices	= 1,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			VIRTEX_UART,
-		},
-	},
-};
+const char* virtex_machine_name = "ML300 Reference Design";
 
 #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-
 static volatile unsigned *powerdown_base =
     (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
 
@@ -95,52 +80,14 @@ ml300_map_io(void)
 #endif
 }
 
-/* Early serial support functions */
-static void __init
-ml300_early_serial_init(int num, struct plat_serial8250_port *pdata)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.mapbase	= pdata->mapbase;
-	serial_req.membase	= pdata->membase;
-	serial_req.irq		= pdata->irq;
-	serial_req.uartclk	= pdata->uartclk;
-	serial_req.regshift	= pdata->regshift;
-	serial_req.iotype	= pdata->iotype;
-	serial_req.flags	= pdata->flags;
-	gen550_init(num, &serial_req);
-#endif
-}
-
-void __init
-ml300_early_serial_map(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct plat_serial8250_port *pdata;
-	int i = 0;
-
-	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
-	while(pdata && pdata->flags)
-	{
-		pdata->membase = ioremap(pdata->mapbase, 0x100);
-		ml300_early_serial_init(i, pdata);
-		pdata++;
-		i++;
-	}
-#endif /* CONFIG_SERIAL_8250 */
-}
-
 void __init
 ml300_setup_arch(void)
 {
-	ml300_early_serial_map();
+	virtex_early_serial_map();
 	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
 
 	/* Identify the system */
-	printk(KERN_INFO "Xilinx Virtex-II Pro port\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
+	printk(KERN_INFO "Xilinx ML300 Reference System (Virtex-II Pro)\n");
 }
 
 /* Called after board_setup_irq from ppc4xx_init_IRQ(). */
@@ -156,8 +103,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 {
 	ppc4xx_init(r3, r4, r5, r6, r7);
 
-	identify_ppc_sys_by_id(mfspr(SPRN_PVR));
-
 	ppc_md.setup_arch = ml300_setup_arch;
 	ppc_md.setup_io_mappings = ml300_map_io;
 	ppc_md.init_IRQ = ml300_init_irq;
@@ -167,7 +112,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif
 
 #ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ml300_early_serial_map;
+	ppc_md.early_serial_map = virtex_early_serial_map;
 #endif
 }
 
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h
deleted file mode 100644
index 3d57332ba820..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml300.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Include file that defines the Xilinx ML300 evaluation board
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_XILINX_ML300_H__
-#define __ASM_XILINX_ML300_H__
-
-/* ML300 has a Xilinx Virtex-II Pro processor */
-#include <platforms/4xx/virtex.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-typedef struct board_info {
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-#endif /* !__ASSEMBLY__ */
-
-/* We don't need anything mapped.  Size of zero will accomplish that. */
-#define PPC4xx_ONB_IO_PADDR	0u
-#define PPC4xx_ONB_IO_VADDR	0u
-#define PPC4xx_ONB_IO_SIZE	0u
-
-#define PPC4xx_MACHINE_NAME "Xilinx ML300 Reference System"
-
-#endif /* __ASM_XILINX_ML300_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c
index cb3bf7a2bcbe..bc3ace3762e7 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml403.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml403.c
@@ -1,11 +1,9 @@
 /*
- * arch/ppc/platforms/4xx/xilinx_ml403.c
- *
  * Xilinx ML403 evaluation board initialization
  *
  * Author: Grant Likely <grant.likely@secretlab.ca>
  *
- * 2005 (c) Secret Lab Technologies Ltd.
+ * 2005-2007 (c) Secret Lab Technologies Ltd.
  * 2002-2004 (c) MontaVista Software, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
@@ -22,9 +20,9 @@
 #include <linux/serialP.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/ppc_sys.h>
 
 #include <syslib/gen550.h>
+#include <syslib/virtex_devices.h>
 #include <platforms/4xx/xparameters/xparameters.h>
 
 /*
@@ -57,24 +55,9 @@
  *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
  */
 
-/* Board specifications structures */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		/* Only one entry, always assume the same design */
-		.ppc_sys_name	= "Xilinx ML403 Reference Design",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-		.num_devices	= 1,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			VIRTEX_UART,
-		},
-	},
-};
+const char* virtex_machine_name = "ML403 Reference Design";
 
 #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-
 static volatile unsigned *powerdown_base =
     (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
 
@@ -99,47 +82,10 @@ ml403_map_io(void)
 #endif
 }
 
-/* Early serial support functions */
-static void __init
-ml403_early_serial_init(int num, struct plat_serial8250_port *pdata)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.mapbase	= pdata->mapbase;
-	serial_req.membase	= pdata->membase;
-	serial_req.irq		= pdata->irq;
-	serial_req.uartclk	= pdata->uartclk;
-	serial_req.regshift	= pdata->regshift;
-	serial_req.iotype	= pdata->iotype;
-	serial_req.flags	= pdata->flags;
-	gen550_init(num, &serial_req);
-#endif
-}
-
-void __init
-ml403_early_serial_map(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct plat_serial8250_port *pdata;
-	int i = 0;
-
-	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
-	while(pdata && pdata->flags)
-	{
-		pdata->membase = ioremap(pdata->mapbase, 0x100);
-		ml403_early_serial_init(i, pdata);
-		pdata++;
-		i++;
-	}
-#endif /* CONFIG_SERIAL_8250 */
-}
-
 void __init
 ml403_setup_arch(void)
 {
-	ml403_early_serial_map();
+	virtex_early_serial_map();
 	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
 
 	/* Identify the system */
@@ -159,8 +105,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 {
 	ppc4xx_init(r3, r4, r5, r6, r7);
 
-	identify_ppc_sys_by_id(mfspr(SPRN_PVR));
-
 	ppc_md.setup_arch = ml403_setup_arch;
 	ppc_md.setup_io_mappings = ml403_map_io;
 	ppc_md.init_IRQ = ml403_init_irq;
@@ -170,7 +114,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif
 
 #ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ml403_early_serial_map;
+	ppc_md.early_serial_map = virtex_early_serial_map;
 #endif
 }
 
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.h b/arch/ppc/platforms/4xx/xilinx_ml403.h
deleted file mode 100644
index 473596959902..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml403.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/xilinx_ml403.h
- *
- * Include file that defines the Xilinx ML403 reference design
- *
- * Author: Grant Likely <grant.likely@secretlab.ca>
- *
- * 2005 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_XILINX_ML403_H__
-#define __ASM_XILINX_ML403_H__
-
-/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */
-#include <platforms/4xx/virtex.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-typedef struct board_info {
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-#endif /* !__ASSEMBLY__ */
-
-/* We don't need anything mapped.  Size of zero will accomplish that. */
-#define PPC4xx_ONB_IO_PADDR	0u
-#define PPC4xx_ONB_IO_VADDR	0u
-#define PPC4xx_ONB_IO_SIZE	0u
-
-#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design"
-
-#endif /* __ASM_XILINX_ML403_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
index 66ec5f35f306..01aa043ff381 100644
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -34,3 +34,63 @@
 	.io_type	 = SERIAL_IO_MEM,				\
   },
 #endif
+
+/*
+ * A few reasonable defaults for the #defines which could be missing depending
+ * on the IP version or variant (e.g. OPB vs PLB)
+ */
+
+#ifndef XPAR_EMAC_0_CAM_EXIST
+#define XPAR_EMAC_0_CAM_EXIST 0
+#endif
+#ifndef XPAR_EMAC_0_JUMBO_EXIST
+#define XPAR_EMAC_0_JUMBO_EXIST 0
+#endif
+#ifndef XPAR_EMAC_0_TX_DRE_TYPE
+#define XPAR_EMAC_0_TX_DRE_TYPE 0
+#endif
+#ifndef XPAR_EMAC_0_RX_DRE_TYPE
+#define XPAR_EMAC_0_RX_DRE_TYPE 0
+#endif
+#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM
+#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0
+#endif
+#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM
+#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0
+#endif
+
+#ifndef XPAR_EMAC_1_CAM_EXIST
+#define XPAR_EMAC_1_CAM_EXIST 0
+#endif
+#ifndef XPAR_EMAC_1_JUMBO_EXIST
+#define XPAR_EMAC_1_JUMBO_EXIST 0
+#endif
+#ifndef XPAR_EMAC_1_TX_DRE_TYPE
+#define XPAR_EMAC_1_TX_DRE_TYPE 0
+#endif
+#ifndef XPAR_EMAC_1_RX_DRE_TYPE
+#define XPAR_EMAC_1_RX_DRE_TYPE 0
+#endif
+#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM
+#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0
+#endif
+#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM
+#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0
+#endif
+
+#ifndef XPAR_GPIO_0_IS_DUAL
+#define XPAR_GPIO_0_IS_DUAL 0
+#endif
+#ifndef XPAR_GPIO_1_IS_DUAL
+#define XPAR_GPIO_1_IS_DUAL 0
+#endif
+#ifndef XPAR_GPIO_2_IS_DUAL
+#define XPAR_GPIO_2_IS_DUAL 0
+#endif
+#ifndef XPAR_GPIO_3_IS_DUAL
+#define XPAR_GPIO_3_IS_DUAL 0
+#endif
+#ifndef XPAR_GPIO_4_IS_DUAL
+#define XPAR_GPIO_4_IS_DUAL 0
+#endif
+
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
index 0bc06768cf24..47f4b38edb5f 100644
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -18,6 +18,7 @@
 #include <linux/ioport.h>
 #include <linux/fs_enet_pd.h>
 #include <linux/platform_device.h>
+#include <linux/phy.h>
 
 #include <asm/io.h>
 #include <asm/mpc8260.h>
@@ -30,10 +31,10 @@
 
 #include "pq2ads_pd.h"
 
-static void init_fcc1_ioports(void);
-static void init_fcc2_ioports(void);
-static void init_scc1_uart_ioports(void);
-static void init_scc4_uart_ioports(void);
+static void init_fcc1_ioports(struct fs_platform_info*);
+static void init_fcc2_ioports(struct fs_platform_info*);
+static void init_scc1_uart_ioports(struct fs_uart_platform_info*);
+static void init_scc4_uart_ioports(struct fs_uart_platform_info*);
 
 static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
 	[fsid_scc1_uart] = {
@@ -103,7 +104,7 @@ static struct fs_platform_info mpc82xx_enet_pdata[] = {
 	},
 };
 
-static void init_fcc1_ioports(struct fs_platform_info*)
+static void init_fcc1_ioports(struct fs_platform_info* pdata)
 {
 	struct io_port *io;
 	u32 tempval;
@@ -144,7 +145,7 @@ static void init_fcc1_ioports(struct fs_platform_info*)
 	iounmap(immap);
 }
 
-static void init_fcc2_ioports(struct fs_platform_info*)
+static void init_fcc2_ioports(struct fs_platform_info* pdata)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 	u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
@@ -229,7 +230,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
 	}
 }
 
-static void init_scc1_uart_ioports(struct fs_uart_platform_info*)
+static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 
@@ -246,7 +247,7 @@ static void init_scc1_uart_ioports(struct fs_uart_platform_info*)
 	iounmap(immap);
 }
 
-static void init_scc4_uart_ioports(struct fs_uart_platform_info*)
+static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata)
 {
 	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
 
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
index 5b05d4bd0df7..7ce5364fdb3b 100644
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -21,6 +21,7 @@
 #include <linux/fs_enet_pd.h>
 #include <linux/fs_uart_pd.h>
 #include <linux/mii.h>
+#include <linux/phy.h>
 
 #include <asm/delay.h>
 #include <asm/io.h>
@@ -37,10 +38,10 @@
 
 extern unsigned char __res[];
 
-static void setup_fec1_ioports(void);
-static void setup_scc1_ioports(void);
-static void setup_smc1_ioports(void);
-static void setup_smc2_ioports(void);
+static void setup_fec1_ioports(struct fs_platform_info*);
+static void setup_scc1_ioports(struct fs_platform_info*);
+static void setup_smc1_ioports(struct fs_uart_platform_info*);
+static void setup_smc2_ioports(struct fs_uart_platform_info*);
 
 static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
 
@@ -137,7 +138,7 @@ void __init board_init(void)
 	iounmap(bcsr_io);
 }
 
-static void setup_fec1_ioports(struct fs_platform_info*)
+static void setup_fec1_ioports(struct fs_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -145,7 +146,7 @@ static void setup_fec1_ioports(struct fs_platform_info*)
 	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
 }
 
-static void setup_scc1_ioports(struct fs_platform_info*)
+static void setup_scc1_ioports(struct fs_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -194,7 +195,7 @@ static void setup_scc1_ioports(struct fs_platform_info*)
 
 }
 
-static void setup_smc1_ioports(struct fs_uart_platform_info*)
+static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -216,7 +217,7 @@ static void setup_smc1_ioports(struct fs_uart_platform_info*)
 
 }
 
-static void setup_smc2_ioports(struct fs_uart_platform_info*)
+static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index f8161f3557f5..87deaefd6c5b 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -35,13 +35,13 @@
 #include <asm/ppc_sys.h>
 
 extern unsigned char __res[];
-static void setup_smc1_ioports(void);
-static void setup_smc2_ioports(void);
+static void setup_smc1_ioports(struct fs_uart_platform_info*);
+static void setup_smc2_ioports(struct fs_uart_platform_info*);
 
 static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
-static void setup_fec1_ioports(void);
-static void setup_fec2_ioports(void);
-static void setup_scc3_ioports(void);
+static void setup_fec1_ioports(struct fs_platform_info*);
+static void setup_fec2_ioports(struct fs_platform_info*);
+static void setup_scc3_ioports(struct fs_platform_info*);
 
 static struct fs_uart_platform_info mpc885_uart_pdata[] = {
 	[fsid_smc1_uart] = {
@@ -161,7 +161,7 @@ void __init board_init(void)
 #endif
 }
 
-static void setup_fec1_ioports(struct fs_platform_info*)
+static void setup_fec1_ioports(struct fs_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -181,7 +181,7 @@ static void setup_fec1_ioports(struct fs_platform_info*)
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
 }
 
-static void setup_fec2_ioports(struct fs_platform_info*)
+static void setup_fec2_ioports(struct fs_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 
@@ -193,7 +193,7 @@ static void setup_fec2_ioports(struct fs_platform_info*)
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
 }
 
-static void setup_scc3_ioports(struct fs_platform_info*)
+static void setup_scc3_ioports(struct fs_platform_info* pdata)
 {
 	immap_t *immap = (immap_t *) IMAP_ADDR;
 	unsigned *bcsr_io;
@@ -315,7 +315,7 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
 	mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
 }
 
-static void setup_smc1_ioports(struct fs_uart_platform_info*)
+static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
         unsigned *bcsr_io;
@@ -335,7 +335,7 @@ static void setup_smc1_ioports(struct fs_uart_platform_info*)
         clrbits16(&immap->im_cpm.cp_pbodr, iobits);
 }
 
-static void setup_smc2_ioports(struct fs_uart_platform_info*)
+static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
         unsigned *bcsr_io;
diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h
index 57a2a55dab8c..a3c1118e5b09 100644
--- a/arch/ppc/platforms/rpxclassic.h
+++ b/arch/ppc/platforms/rpxclassic.h
@@ -69,10 +69,6 @@ extern bd_t m8xx_board_info;
 #define BCSR2_QSPACESEL		((uint)0x00004000)
 #define BCSR2_FETHLEDMODE	((uint)0x00000800)	/* CLLF */
 
-#if defined(CONFIG_HTDMSOUND)
-#include <platforms/rpxhiox.h>
-#endif
-
 /* define IO_BASE for pcmcia, CLLF only */
 #if !defined(CONFIG_PCI)
 #define _IO_BASE 0x80000000
diff --git a/arch/ppc/platforms/rpxhiox.h b/arch/ppc/platforms/rpxhiox.h
deleted file mode 100644
index c3fa5a653762..000000000000
--- a/arch/ppc/platforms/rpxhiox.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * The Embedded Planet HIOX expansion card definitions.
- * There were a few different versions of these cards, but only
- * the one that escaped real production is defined here.
- *
- * Copyright (c) 2000 Dan Malek (dmalek@jlc.net)
- */
-#ifndef __MACH_RPX_HIOX_DEFS
-#define __MACH_RPX_HIOX_DEFS
-
-#define HIOX_CSR_ADDR		((uint)0xfac00000)
-#define HIOX_CSR_SIZE		((uint)(4 * 1024))
-#define HIOX_CSR0_ADDR		HIOX_CSR_ADDR
-#define HIOX_CSR4_ADDR		((uint)0xfac00004)
-
-#define HIOX_CSR0_DEFAULT	((uint)0x380f3c00)
-#define HIOX_CSR0_ENSCC2	((uint)0x80000000)
-#define HIOX_CSR0_ENSMC2	((uint)0x04000000)
-#define HIOX_CSR0_ENVDOCLK	((uint)0x02000000)
-#define HIOX_CSR0_VDORST_HL	((uint)0x01000000)
-#define HIOX_CSR0_RS232SEL	((uint)0x0000c000)
-#define HIOX_CSR0_SCC3SEL	((uint)0x0000c000)
-#define HIOX_CSR0_SMC1SEL	((uint)0x00008000)
-#define HIOX_CSR0_SCC1SEL	((uint)0x00004000)
-#define HIOX_CSR0_ENTOUCH	((uint)0x00000080)
-#define HIOX_CSR0_PDOWN100	((uint)0x00000060)
-#define HIOX_CSR0_PDOWN10	((uint)0x00000040)
-#define HIOX_CSR0_PDOWN1	((uint)0x00000020)
-#define HIOX_CSR0_TSELSPI	((uint)0x00000010)
-#define HIOX_CSR0_TIRQSTAT	((uint)0x00000008)
-#define HIOX_CSR4_DEFAULT	((uint)0x00000000)
-#define HIOX_CSR4_ENTIRQ2	((uint)0x20000000)
-#define HIOX_CSR4_ENTIRQ3	((uint)0x10000000)
-#define HIOX_CSR4_ENAUDIO	((uint)0x00000080)
-#define HIOX_CSR4_RSTAUDIO	((uint)0x00000040)	/* 0 == reset */
-#define HIOX_CSR4_AUDCLKHI	((uint)0x00000020)
-#define HIOX_CSR4_AUDSPISEL	((uint)0x00000010)
-#define HIOX_CSR4_AUDIRQSTAT	((uint)0x00000008)
-#define HIOX_CSR4_AUDCLKSEL	((uint)0x00000007)
-
-#endif
diff --git a/arch/ppc/platforms/rpxlite.h b/arch/ppc/platforms/rpxlite.h
index 719780646270..b615501d55fc 100644
--- a/arch/ppc/platforms/rpxlite.h
+++ b/arch/ppc/platforms/rpxlite.h
@@ -57,10 +57,6 @@ extern bd_t m8xx_board_info;
 #define BCSR1_PCVCTL6          ((uint)0x00020000)
 #define BCSR1_PCVCTL7          ((uint)0x00010000)
 
-#if defined(CONFIG_HTDMSOUND)
-#include <platforms/rpxhiox.h>
-#endif
-
 /* define IO_BASE for pcmcia */
 #define _IO_BASE 0x80000000
 #define _IO_BASE_SIZE 0x1000
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 09911118c675..95694159b226 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -18,7 +18,8 @@ obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
 obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
 ifeq ($(CONFIG_4xx),y)
 ifeq ($(CONFIG_XILINX_VIRTEX),y)
-obj-$(CONFIG_40x)		+= xilinx_pic.o ppc_sys.o
+obj-$(CONFIG_40x)		+= xilinx_pic.o
+obj-y				+= virtex_devices.o
 else
 ifeq ($(CONFIG_403),y)
 obj-$(CONFIG_40x)		+= ppc403_pic.o
diff --git a/arch/ppc/syslib/cpc710.h b/arch/ppc/syslib/cpc710.h
deleted file mode 100644
index 5299bf8b5d01..000000000000
--- a/arch/ppc/syslib/cpc710.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Definitions for the IBM CPC710 PCI Host Bridge
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PLATFORMS_CPC710_H
-#define __PPC_PLATFORMS_CPC710_H
-
-/* General bridge and memory controller registers */
-#define PIDR	0xff000008
-#define	CNFR	0xff00000c
-#define	RSTR	0xff000010
-#define UCTL	0xff001000
-#define	MPSR	0xff001010
-#define	SIOC	0xff001020
-#define	ABCNTL	0xff001030
-#define SRST	0xff001040
-#define	ERRC	0xff001050
-#define	SESR	0xff001060
-#define	SEAR	0xff001070
-#define	SIOC1	0xff001090
-#define	PGCHP	0xff001100
-#define	GPDIR	0xff001130
-#define	GPOUT	0xff001150
-#define	ATAS	0xff001160
-#define	AVDG	0xff001170
-#define	MCCR	0xff001200
-#define	MESR	0xff001220
-#define	MEAR	0xff001230
-#define	MCER0	0xff001300
-#define	MCER1	0xff001310
-#define	MCER2	0xff001320
-#define	MCER3	0xff001330
-#define	MCER4	0xff001340
-#define	MCER5	0xff001350
-#define	MCER6	0xff001360
-#define	MCER7	0xff001370
-
-/*
- * PCI32/64 configuration registers
- * Given as offsets from their
- * respective physical segment BAR
- */
-#define PIBAR	0x000f7800
-#define PMBAR	0x000f7810
-#define MSIZE	0x000f7f40
-#define IOSIZE	0x000f7f60
-#define SMBAR	0x000f7f80
-#define SIBAR	0x000f7fc0
-#define PSSIZE	0x000f8100
-#define PPSIZE	0x000f8110
-#define BARPS	0x000f8120
-#define BARPP	0x000f8130
-#define PSBAR	0x000f8140
-#define PPBAR	0x000f8150
-#define BPMDLK	0x000f8200      /* Bottom of Peripheral Memory Space */
-#define TPMDLK	0x000f8210      /* Top of Peripheral Memory Space */
-#define BIODLK	0x000f8220      /* Bottom of Peripheral I/O Space */
-#define TIODLK	0x000f8230      /* Top of Perioheral I/O Space */
-#define DLKCTRL	0x000f8240      /* Deadlock control */
-#define DLKDEV	0x000f8250      /* Deadlock device */
-
-/* System standard configuration registers space */
-#define	DCR	0xff200000
-#define	DID	0xff200004
-#define	BAR	0xff200018
-
-/* Device specific configuration space */
-#define	PCIENB	0xff201000
-
-/* Configuration space registers */
-#define CPC710_BUS_NUMBER	0x40
-#define CPC710_SUB_BUS_NUMBER	0x41
-
-#endif /* __PPC_PLATFORMS_CPC710_H */
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 01e48d88f22d..9caf850c9b38 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -413,7 +413,7 @@ m8xx_map_io(void)
 	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
 #endif
 #endif
-#if defined(CONFIG_HTDMSOUND) || defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
+#if defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
 	io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO);
 #endif
 #ifdef CONFIG_FADS
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 3b039c30a439..a6f8b686ea83 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -339,7 +339,9 @@ static struct resource mv64x60_eth0_resources[] = {
 	},
 };
 
-static struct mv643xx_eth_platform_data eth0_pd;
+static struct mv643xx_eth_platform_data eth0_pd = {
+	.port_number	= 0,
+};
 
 static struct platform_device eth0_device = {
 	.name		= MV643XX_ETH_NAME,
@@ -362,7 +364,9 @@ static struct resource mv64x60_eth1_resources[] = {
 	},
 };
 
-static struct mv643xx_eth_platform_data eth1_pd;
+static struct mv643xx_eth_platform_data eth1_pd = {
+	.port_number	= 1,
+};
 
 static struct platform_device eth1_device = {
 	.name		= MV643XX_ETH_NAME,
@@ -385,7 +389,9 @@ static struct resource mv64x60_eth2_resources[] = {
 	},
 };
 
-static struct mv643xx_eth_platform_data eth2_pd;
+static struct mv643xx_eth_platform_data eth2_pd = {
+	.port_number	= 2,
+};
 
 static struct platform_device eth2_device = {
 	.name		= MV643XX_ETH_NAME,
diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c
index 2f83e162971f..939abe3c1f45 100644
--- a/arch/ppc/syslib/ppc4xx_sgdma.c
+++ b/arch/ppc/syslib/ppc4xx_sgdma.c
@@ -27,6 +27,7 @@
 
 #include <asm/system.h>
 #include <asm/io.h>
+#include <asm/dma-mapping.h>
 #include <asm/ppc4xx_dma.h>
 
 void
diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c
new file mode 100644
index 000000000000..16546788e23b
--- /dev/null
+++ b/arch/ppc/syslib/virtex_devices.c
@@ -0,0 +1,233 @@
+/*
+ * Virtex hard ppc405 core common device listing
+ *
+ * Copyright 2005-2007 Secret Lab Technologies Ltd.
+ * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2002-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <syslib/virtex_devices.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+#include <asm/io.h>
+
+/*
+ * UARTLITE: shortcut macro for single instance
+ */
+#define XPAR_UARTLITE(num) { \
+	.name = "uartlite", \
+	.id = num, \
+	.num_resources = 2, \
+	.resource = (struct resource[]) { \
+		{ \
+			.start = XPAR_UARTLITE_##num##_BASEADDR + 3, \
+			.end = XPAR_UARTLITE_##num##_HIGHADDR, \
+			.flags = IORESOURCE_MEM, \
+		}, \
+		{ \
+			.start = XPAR_INTC_0_UARTLITE_##num##_VEC_ID, \
+			.flags = IORESOURCE_IRQ, \
+		}, \
+	}, \
+}
+
+/*
+ * Full UART: shortcut macro for single instance + platform data structure
+ */
+#define XPAR_UART(num) { \
+	.mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \
+	.irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+	.iotype = UPIO_MEM, \
+	.uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
+	.flags = UPF_BOOT_AUTOCONF, \
+	.regshift = 2, \
+}
+
+/*
+ * SystemACE: shortcut macro for single instance
+ */
+#define XPAR_SYSACE(num) { \
+	.name		= "xsysace", \
+	.id		= XPAR_SYSACE_##num##_DEVICE_ID, \
+	.num_resources	= 2, \
+	.resource = (struct resource[]) { \
+		{ \
+			.start	= XPAR_SYSACE_##num##_BASEADDR, \
+			.end	= XPAR_SYSACE_##num##_HIGHADDR, \
+			.flags	= IORESOURCE_MEM, \
+		}, \
+		{ \
+			.start	= XPAR_INTC_0_SYSACE_##num##_VEC_ID, \
+			.flags	= IORESOURCE_IRQ, \
+		}, \
+	}, \
+}
+
+
+/* UART 8250 driver platform data table */
+struct plat_serial8250_port virtex_serial_platform_data[] = {
+#if defined(XPAR_UARTNS550_0_BASEADDR)
+	XPAR_UART(0),
+#endif
+#if defined(XPAR_UARTNS550_1_BASEADDR)
+	XPAR_UART(1),
+#endif
+#if defined(XPAR_UARTNS550_2_BASEADDR)
+	XPAR_UART(2),
+#endif
+#if defined(XPAR_UARTNS550_3_BASEADDR)
+	XPAR_UART(3),
+#endif
+#if defined(XPAR_UARTNS550_4_BASEADDR)
+	XPAR_UART(4),
+#endif
+#if defined(XPAR_UARTNS550_5_BASEADDR)
+	XPAR_UART(5),
+#endif
+#if defined(XPAR_UARTNS550_6_BASEADDR)
+	XPAR_UART(6),
+#endif
+#if defined(XPAR_UARTNS550_7_BASEADDR)
+	XPAR_UART(7),
+#endif
+	{ }, /* terminated by empty record */
+};
+
+
+struct platform_device virtex_platform_devices[] = {
+	/* UARTLITE instances */
+#if defined(XPAR_UARTLITE_0_BASEADDR)
+	XPAR_UARTLITE(0),
+#endif
+#if defined(XPAR_UARTLITE_1_BASEADDR)
+	XPAR_UARTLITE(1),
+#endif
+#if defined(XPAR_UARTLITE_2_BASEADDR)
+	XPAR_UARTLITE(2),
+#endif
+#if defined(XPAR_UARTLITE_3_BASEADDR)
+	XPAR_UARTLITE(3),
+#endif
+#if defined(XPAR_UARTLITE_4_BASEADDR)
+	XPAR_UARTLITE(4),
+#endif
+#if defined(XPAR_UARTLITE_5_BASEADDR)
+	XPAR_UARTLITE(5),
+#endif
+#if defined(XPAR_UARTLITE_6_BASEADDR)
+	XPAR_UARTLITE(6),
+#endif
+#if defined(XPAR_UARTLITE_7_BASEADDR)
+	XPAR_UARTLITE(7),
+#endif
+
+	/* Full UART instances */
+#if defined(XPAR_UARTNS550_0_BASEADDR)
+	{
+		.name		= "serial8250",
+		.id		= 0,
+		.dev.platform_data = virtex_serial_platform_data,
+	},
+#endif
+
+	/* SystemACE instances */
+#if defined(XPAR_SYSACE_0_BASEADDR)
+	XPAR_SYSACE(0),
+#endif
+#if defined(XPAR_SYSACE_1_BASEADDR)
+	XPAR_SYSACE(1),
+#endif
+
+	/* ML300/403 reference design framebuffer */
+#if defined(XPAR_TFT_0_BASEADDR)
+	{
+		.name		= "xilinxfb",
+		.id		= 0,
+		.num_resources	= 1,
+		.resource = (struct resource[]) {
+			{
+				.start	= XPAR_TFT_0_BASEADDR,
+				.end	= XPAR_TFT_0_BASEADDR+7,
+				.flags	= IORESOURCE_IO,
+			},
+		},
+	},
+#endif
+};
+
+/* Early serial support functions */
+static void __init
+virtex_early_serial_init(int num, struct plat_serial8250_port *pdata)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	struct uart_port serial_req;
+
+	memset(&serial_req, 0, sizeof(serial_req));
+	serial_req.mapbase	= pdata->mapbase;
+	serial_req.membase	= pdata->membase;
+	serial_req.irq		= pdata->irq;
+	serial_req.uartclk	= pdata->uartclk;
+	serial_req.regshift	= pdata->regshift;
+	serial_req.iotype	= pdata->iotype;
+	serial_req.flags	= pdata->flags;
+	gen550_init(num, &serial_req);
+#endif
+}
+
+void __init
+virtex_early_serial_map(void)
+{
+#ifdef CONFIG_SERIAL_8250
+	struct plat_serial8250_port *pdata;
+	int i = 0;
+
+	pdata = virtex_serial_platform_data;
+	while(pdata && pdata->flags) {
+		pdata->membase = ioremap(pdata->mapbase, 0x100);
+		virtex_early_serial_init(i, pdata);
+		pdata++;
+		i++;
+	}
+#endif /* CONFIG_SERIAL_8250 */
+}
+
+/*
+ * default fixup routine; do nothing and return success.
+ *
+ * Reimplement this routine in your custom board support file to
+ * override the default behaviour
+ */
+int __attribute__ ((weak))
+virtex_device_fixup(struct platform_device *dev)
+{
+	return 0;
+}
+
+static int __init virtex_init(void)
+{
+	struct platform_device *index = virtex_platform_devices;
+	unsigned int ret = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(virtex_platform_devices); i++, index++) {
+		if (virtex_device_fixup(index) != 0)
+			continue;
+
+		if (platform_device_register(index)) {
+			ret = 1;
+			printk(KERN_ERR "cannot register dev %s:%d\n",
+			       index->name, index->id);
+		}
+	}
+	return ret;
+}
+
+subsys_initcall(virtex_init);
diff --git a/arch/ppc/syslib/virtex_devices.h b/arch/ppc/syslib/virtex_devices.h
new file mode 100644
index 000000000000..4a17dd3927c1
--- /dev/null
+++ b/arch/ppc/syslib/virtex_devices.h
@@ -0,0 +1,27 @@
+/*
+ * Common support header for virtex ppc405 platforms
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_VIRTEX_DEVICES_H__
+#define __ASM_VIRTEX_DEVICES_H__
+
+#include <linux/platform_device.h>
+
+void __init virtex_early_serial_map(void);
+
+/* Prototype for device fixup routine.  Implement this routine in the
+ * board specific fixup code and the generic setup code will call it for
+ * each device is the platform device list.
+ *
+ * If the hook returns a non-zero value, then the device will not get
+ * registered with the platform bus
+ */
+int virtex_device_fixup(struct platform_device *dev);
+
+#endif  /* __ASM_VIRTEX_DEVICES_H__ */
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index eaaac3788110..e6ec418093e5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -8,8 +8,8 @@ config MMU
 	default y
 
 config ZONE_DMA
-	bool
-	default y
+	def_bool y
+	depends on 64BIT
 
 config LOCKDEP_SUPPORT
 	bool
@@ -41,6 +41,11 @@ config GENERIC_HWEIGHT
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_BUG
+	bool
+	depends on BUG
+	default y
+
 config NO_IOMEM
 	def_bool y
 
@@ -376,6 +381,8 @@ config SHARED_KERNEL
 	  Select this option, if you want to share the text segment of the
 	  Linux kernel between different VM guests. This reduces memory
 	  usage with lots of guests but greatly increases kernel size.
+	  Also if a kernel was IPL'ed from a shared segment the kexec system
+	  call will not work.
 	  You should only select this option if you know what you are
 	  doing and want to exploit this feature.
 
@@ -512,6 +519,14 @@ config KEXEC
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but is independent of hardware/microcode support.
 
+config ZFCPDUMP
+	tristate "zfcpdump support"
+	select SMP
+	default n
+	help
+	  Select this option if you want to build an zfcpdump enabled kernel.
+	  Refer to "Documentation/s390/zfcpdump.txt" for more details on this.
+
 endmenu
 
 source "net/Kconfig"
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 6598e5268573..68441e0e74b6 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -67,8 +67,10 @@ endif
 
 ifeq ($(call cc-option-yn,-mstack-size=8192 -mstack-guard=128),y)
 cflags-$(CONFIG_CHECK_STACK) += -mstack-size=$(STACK_SIZE)
+ifneq ($(call cc-option-yn,-mstack-size=8192),y)
 cflags-$(CONFIG_CHECK_STACK) += -mstack-guard=$(CONFIG_STACK_GUARD)
 endif
+endif
 
 ifeq ($(call cc-option-yn,-mwarn-dynamicstack),y)
 cflags-$(CONFIG_WARN_STACK) += -mwarn-dynamicstack
@@ -82,18 +84,18 @@ AFLAGS		+= $(aflags-y)
 OBJCOPYFLAGS	:= -O binary
 LDFLAGS_vmlinux := -e start
 
-head-y		:= arch/$(ARCH)/kernel/head.o arch/$(ARCH)/kernel/init_task.o
+head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
 
-core-y		+= arch/$(ARCH)/mm/ arch/$(ARCH)/kernel/ arch/$(ARCH)/crypto/ \
-		   arch/$(ARCH)/appldata/ arch/$(ARCH)/hypfs/
-libs-y		+= arch/$(ARCH)/lib/
+core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
+		   arch/s390/appldata/ arch/s390/hypfs/
+libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
-drivers-$(CONFIG_MATHEMU) += arch/$(ARCH)/math-emu/
+drivers-$(CONFIG_MATHEMU) += arch/s390/math-emu/
 
 # must be linked after kernel
 drivers-$(CONFIG_OPROFILE)	+= arch/s390/oprofile/
 
-boot		:= arch/$(ARCH)/boot
+boot		:= arch/s390/boot
 
 all: image
 
@@ -103,6 +105,9 @@ install: vmlinux
 image: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
+zfcpdump:
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 0c3cf4b16ae4..ee89b33145d5 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -668,45 +668,7 @@ EXPORT_SYMBOL_GPL(appldata_register_ops);
 EXPORT_SYMBOL_GPL(appldata_unregister_ops);
 EXPORT_SYMBOL_GPL(appldata_diag);
 
-#ifdef MODULE
-/*
- * Kernel symbols needed by appldata_mem and appldata_os modules.
- * However, if this file is compiled as a module (for testing only), these
- * symbols are not exported. In this case, we define them locally and export
- * those.
- */
-void si_swapinfo(struct sysinfo *val)
-{
-	val->freeswap = -1ul;
-	val->totalswap = -1ul;
-}
-
-unsigned long avenrun[3] = {-1 - FIXED_1/200, -1 - FIXED_1/200,
-				-1 - FIXED_1/200};
-int nr_threads = -1;
-
-void get_full_page_state(struct page_state *ps)
-{
-	memset(ps, -1, sizeof(struct page_state));
-}
-
-unsigned long nr_running(void)
-{
-	return -1;
-}
-
-unsigned long nr_iowait(void)
-{
-	return -1;
-}
-
-/*unsigned long nr_context_switches(void)
-{
-	return -1;
-}*/
-#endif /* MODULE */
 EXPORT_SYMBOL_GPL(si_swapinfo);
 EXPORT_SYMBOL_GPL(nr_threads);
 EXPORT_SYMBOL_GPL(nr_running);
 EXPORT_SYMBOL_GPL(nr_iowait);
-//EXPORT_SYMBOL_GPL(nr_context_switches);
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 4ca615788702..697eb30a68a3 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -117,7 +117,10 @@ static void appldata_get_mem_data(void *data)
 	mem_data->pgpgout    = ev[PGPGOUT] >> 1;
 	mem_data->pswpin     = ev[PSWPIN];
 	mem_data->pswpout    = ev[PSWPOUT];
-	mem_data->pgalloc    = ev[PGALLOC_NORMAL] + ev[PGALLOC_DMA];
+	mem_data->pgalloc    = ev[PGALLOC_NORMAL];
+#ifdef CONFIG_ZONE_DMA
+	mem_data->pgalloc    += ev[PGALLOC_DMA];
+#endif
 	mem_data->pgfault    = ev[PGFAULT];
 	mem_data->pgmajfault = ev[PGMAJFAULT];
 
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index f64b8c867ae2..a43f3488fecf 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -108,9 +108,6 @@ static void appldata_get_net_sum_data(void *data)
 	collisions = 0;
 	read_lock(&dev_base_lock);
 	for (dev = dev_base; dev != NULL; dev = dev->next) {
-		if (dev->get_stats == NULL) {
-			continue;
-		}
 		stats = dev->get_stats(dev);
 		rx_packets += stats->rx_packets;
 		tx_packets += stats->tx_packets;
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 969639f31977..af4460ec381f 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -25,99 +25,100 @@
  */
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/mm.h>
 #include <linux/crypto.h>
-#include <asm/scatterlist.h>
-#include <asm/byteorder.h>
+
 #include "crypt_s390.h"
 
 #define SHA1_DIGEST_SIZE	20
 #define SHA1_BLOCK_SIZE		64
 
-struct crypt_s390_sha1_ctx {
-	u64 count;
+struct s390_sha1_ctx {
+	u64 count;		/* message length */
 	u32 state[5];
-	u32 buf_len;
-	u8 buffer[2 * SHA1_BLOCK_SIZE];
+	u8 buf[2 * SHA1_BLOCK_SIZE];
 };
 
 static void sha1_init(struct crypto_tfm *tfm)
 {
-	struct crypt_s390_sha1_ctx *ctx = crypto_tfm_ctx(tfm);
-
-	ctx->state[0] = 0x67452301;
-	ctx->state[1] =	0xEFCDAB89;
-	ctx->state[2] =	0x98BADCFE;
-	ctx->state[3] = 0x10325476;
-	ctx->state[4] =	0xC3D2E1F0;
-
-	ctx->count = 0;
-	ctx->buf_len = 0;
+	struct s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+
+	sctx->state[0] = 0x67452301;
+	sctx->state[1] = 0xEFCDAB89;
+	sctx->state[2] = 0x98BADCFE;
+	sctx->state[3] = 0x10325476;
+	sctx->state[4] = 0xC3D2E1F0;
+	sctx->count = 0;
 }
 
 static void sha1_update(struct crypto_tfm *tfm, const u8 *data,
 			unsigned int len)
 {
-	struct crypt_s390_sha1_ctx *sctx;
-	long imd_len;
-
-	sctx = crypto_tfm_ctx(tfm);
-	sctx->count += len * 8; /* message bit length */
-
-	/* anything in buffer yet? -> must be completed */
-	if (sctx->buf_len && (sctx->buf_len + len) >= SHA1_BLOCK_SIZE) {
-		/* complete full block and hash */
-		memcpy(sctx->buffer + sctx->buf_len, data,
-		       SHA1_BLOCK_SIZE - sctx->buf_len);
-		crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buffer,
-				SHA1_BLOCK_SIZE);
-		data += SHA1_BLOCK_SIZE - sctx->buf_len;
-		len -= SHA1_BLOCK_SIZE - sctx->buf_len;
-		sctx->buf_len = 0;
+	struct s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+	unsigned int index;
+	int ret;
+
+	/* how much is already in the buffer? */
+	index = sctx->count & 0x3f;
+
+	sctx->count += len;
+
+	if (index + len < SHA1_BLOCK_SIZE)
+		goto store;
+
+	/* process one stored block */
+	if (index) {
+		memcpy(sctx->buf + index, data, SHA1_BLOCK_SIZE - index);
+		ret = crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buf,
+				      SHA1_BLOCK_SIZE);
+		BUG_ON(ret != SHA1_BLOCK_SIZE);
+		data += SHA1_BLOCK_SIZE - index;
+		len -= SHA1_BLOCK_SIZE - index;
 	}
 
-	/* rest of data contains full blocks? */
-	imd_len = len & ~0x3ful;
-	if (imd_len) {
-		crypt_s390_kimd(KIMD_SHA_1, sctx->state, data, imd_len);
-		data += imd_len;
-		len -= imd_len;
+	/* process as many blocks as possible */
+	if (len >= SHA1_BLOCK_SIZE) {
+		ret = crypt_s390_kimd(KIMD_SHA_1, sctx->state, data,
+				      len & ~(SHA1_BLOCK_SIZE - 1));
+		BUG_ON(ret != (len & ~(SHA1_BLOCK_SIZE - 1)));
+		data += ret;
+		len -= ret;
 	}
-	/* anything left? store in buffer */
-	if (len) {
-		memcpy(sctx->buffer + sctx->buf_len , data, len);
-		sctx->buf_len += len;
-	}
-}
 
+store:
+	/* anything left? */
+	if (len)
+		memcpy(sctx->buf + index , data, len);
+}
 
-static void pad_message(struct crypt_s390_sha1_ctx* sctx)
+/* Add padding and return the message digest. */
+static void sha1_final(struct crypto_tfm *tfm, u8 *out)
 {
-	int index;
+	struct s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+	u64 bits;
+	unsigned int index, end;
+	int ret;
+
+	/* must perform manual padding */
+	index = sctx->count & 0x3f;
+	end =  (index < 56) ? SHA1_BLOCK_SIZE : (2 * SHA1_BLOCK_SIZE);
 
-	index = sctx->buf_len;
-	sctx->buf_len = (sctx->buf_len < 56) ?
-			 SHA1_BLOCK_SIZE:2 * SHA1_BLOCK_SIZE;
 	/* start pad with 1 */
-	sctx->buffer[index] = 0x80;
+	sctx->buf[index] = 0x80;
+
 	/* pad with zeros */
 	index++;
-	memset(sctx->buffer + index, 0x00, sctx->buf_len - index);
-	/* append length */
-	memcpy(sctx->buffer + sctx->buf_len - 8, &sctx->count,
-	       sizeof sctx->count);
-}
+	memset(sctx->buf + index, 0x00, end - index - 8);
 
-/* Add padding and return the message digest. */
-static void sha1_final(struct crypto_tfm *tfm, u8 *out)
-{
-	struct crypt_s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+	/* append message length */
+	bits = sctx->count * 8;
+	memcpy(sctx->buf + end - 8, &bits, sizeof(bits));
+
+	ret = crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buf, end);
+	BUG_ON(ret != end);
 
-	/* must perform manual padding */
-	pad_message(sctx);
-	crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buffer, sctx->buf_len);
 	/* copy digest to out */
 	memcpy(out, sctx->state, SHA1_DIGEST_SIZE);
+
 	/* wipe context */
 	memset(sctx, 0, sizeof *sctx);
 }
@@ -128,7 +129,7 @@ static struct crypto_alg alg = {
 	.cra_priority	=	CRYPT_S390_PRIORITY,
 	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
 	.cra_blocksize	=	SHA1_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct crypt_s390_sha1_ctx),
+	.cra_ctxsize	=	sizeof(struct s390_sha1_ctx),
 	.cra_module	=	THIS_MODULE,
 	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
 	.cra_u		=	{ .digest = {
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 78436c696d37..2ced3330bce0 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -26,7 +26,7 @@
 #define SHA256_BLOCK_SIZE	64
 
 struct s390_sha256_ctx {
-	u64 count;
+	u64 count;		/* message length */
 	u32 state[8];
 	u8 buf[2 * SHA256_BLOCK_SIZE];
 };
@@ -54,10 +54,9 @@ static void sha256_update(struct crypto_tfm *tfm, const u8 *data,
 	int ret;
 
 	/* how much is already in the buffer? */
-	index = sctx->count / 8 & 0x3f;
+	index = sctx->count & 0x3f;
 
-	/* update message bit length */
-	sctx->count += len * 8;
+	sctx->count += len;
 
 	if ((index + len) < SHA256_BLOCK_SIZE)
 		goto store;
@@ -87,12 +86,17 @@ store:
 		memcpy(sctx->buf + index , data, len);
 }
 
-static void pad_message(struct s390_sha256_ctx* sctx)
+/* Add padding and return the message digest */
+static void sha256_final(struct crypto_tfm *tfm, u8 *out)
 {
-	int index, end;
+	struct s390_sha256_ctx *sctx = crypto_tfm_ctx(tfm);
+	u64 bits;
+	unsigned int index, end;
+	int ret;
 
-	index = sctx->count / 8 & 0x3f;
-	end = index < 56 ? SHA256_BLOCK_SIZE : 2 * SHA256_BLOCK_SIZE;
+	/* must perform manual padding */
+	index = sctx->count & 0x3f;
+	end = (index < 56) ? SHA256_BLOCK_SIZE : (2 * SHA256_BLOCK_SIZE);
 
 	/* start pad with 1 */
 	sctx->buf[index] = 0x80;
@@ -102,21 +106,11 @@ static void pad_message(struct s390_sha256_ctx* sctx)
 	memset(sctx->buf + index, 0x00, end - index - 8);
 
 	/* append message length */
-	memcpy(sctx->buf + end - 8, &sctx->count, sizeof sctx->count);
-
-	sctx->count = end * 8;
-}
-
-/* Add padding and return the message digest */
-static void sha256_final(struct crypto_tfm *tfm, u8 *out)
-{
-	struct s390_sha256_ctx *sctx = crypto_tfm_ctx(tfm);
-
-	/* must perform manual padding */
-	pad_message(sctx);
+	bits = sctx->count * 8;
+	memcpy(sctx->buf + end - 8, &bits, sizeof(bits));
 
-	crypt_s390_kimd(KIMD_SHA_256, sctx->state, sctx->buf,
-			sctx->count / 8);
+	ret = crypt_s390_kimd(KIMD_SHA_256, sctx->state, sctx->buf, end);
+	BUG_ON(ret != end);
 
 	/* copy digest to out */
 	memcpy(out, sctx->state, SHA256_DIGEST_SIZE);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 1406400bf3ea..0e4da8a7d826 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Fri Dec 15 16:52:28 2006
+# Linux kernel version: 2.6.21-rc1
+# Wed Feb 21 10:44:30 2007
 #
 CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -11,6 +12,8 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_BUG=y
+CONFIG_NO_IOMEM=y
 CONFIG_S390=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -29,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -133,6 +137,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_HOLES_IN_ZONE=y
 
 #
@@ -162,6 +167,7 @@ CONFIG_NO_IDLE_HZ=y
 CONFIG_NO_IDLE_HZ_INIT=y
 CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
+# CONFIG_ZFCPDUMP is not set
 
 #
 # Networking
@@ -178,7 +184,9 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_IUCV=m
 CONFIG_AFIUCV=m
 CONFIG_INET=y
@@ -195,7 +203,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
@@ -313,6 +321,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 CONFIG_SYS_HYPERVISOR=y
 
 #
@@ -686,26 +695,27 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 
 #
 # Security options
@@ -733,8 +743,10 @@ CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_FCRYPT=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -748,6 +760,7 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -768,4 +781,3 @@ CONFIG_BITREVERSE=m
 CONFIG_CRC32=m
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 5492d25d7d69..3195d375bd51 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -6,7 +6,7 @@ EXTRA_AFLAGS	:= -traditional
 
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
-	    semaphore.o s390_ext.o debug.o irq.o ipl.o
+	    semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 664c669b1856..5236fdb17fcb 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -495,29 +495,34 @@ sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
  * sys32_execve() executes a new program after the asm stub has set
  * things up for us.  This should basically do what I want it to.
  */
-asmlinkage long
-sys32_execve(struct pt_regs regs)
+asmlinkage long sys32_execve(void)
 {
-        int error;
-        char * filename;
+	struct pt_regs *regs = task_pt_regs(current);
+	char *filename;
+	unsigned long result;
+	int rc;
 
-        filename = getname(compat_ptr(regs.orig_gpr2));
-        error = PTR_ERR(filename);
-        if (IS_ERR(filename))
+	filename = getname(compat_ptr(regs->orig_gpr2));
+	if (IS_ERR(filename)) {
+		result = PTR_ERR(filename);
                 goto out;
-        error = compat_do_execve(filename, compat_ptr(regs.gprs[3]),
-				 compat_ptr(regs.gprs[4]), &regs);
-	if (error == 0)
-	{
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-		current->thread.fp_regs.fpc=0;
-		asm volatile("sfpc %0,0" : : "d" (0));
 	}
+	rc = compat_do_execve(filename, compat_ptr(regs->gprs[3]),
+			      compat_ptr(regs->gprs[4]), regs);
+	if (rc) {
+		result = rc;
+		goto out_putname;
+	}
+	task_lock(current);
+	current->ptrace &= ~PT_DTRACE;
+	task_unlock(current);
+	current->thread.fp_regs.fpc=0;
+	asm volatile("sfpc %0,0" : : "d" (0));
+	result = regs->gprs[2];
+out_putname:
         putname(filename);
 out:
-        return error;
+	return result;
 }
 
 
@@ -918,19 +923,20 @@ asmlinkage long sys32_write(unsigned int fd, char __user * buf, size_t count)
 	return sys_write(fd, buf, count);
 }
 
-asmlinkage long sys32_clone(struct pt_regs regs)
+asmlinkage long sys32_clone(void)
 {
-        unsigned long clone_flags;
-        unsigned long newsp;
+	struct pt_regs *regs = task_pt_regs(current);
+	unsigned long clone_flags;
+	unsigned long newsp;
 	int __user *parent_tidptr, *child_tidptr;
 
-        clone_flags = regs.gprs[3] & 0xffffffffUL;
-        newsp = regs.orig_gpr2 & 0x7fffffffUL;
-	parent_tidptr = compat_ptr(regs.gprs[4]);
-	child_tidptr = compat_ptr(regs.gprs[5]);
-        if (!newsp)
-                newsp = regs.gprs[15];
-        return do_fork(clone_flags, newsp, &regs, 0,
+	clone_flags = regs->gprs[3] & 0xffffffffUL;
+	newsp = regs->orig_gpr2 & 0x7fffffffUL;
+	parent_tidptr = compat_ptr(regs->gprs[4]);
+	child_tidptr = compat_ptr(regs->gprs[5]);
+	if (!newsp)
+		newsp = regs->gprs[15];
+	return do_fork(clone_flags, newsp, regs, 0,
 		       parent_tidptr, child_tidptr);
 }
 
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 887a9881d0d0..80a54a0149ab 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -255,9 +255,9 @@ sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
 }
 
 asmlinkage long
-sys32_sigaltstack(const stack_t32 __user *uss, stack_t32 __user *uoss,
-							struct pt_regs *regs)
+sys32_sigaltstack(const stack_t32 __user *uss, stack_t32 __user *uoss)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	stack_t kss, koss;
 	unsigned long ss_sp;
 	int ret, err = 0;
@@ -344,8 +344,9 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 	return 0;
 }
 
-asmlinkage long sys32_sigreturn(struct pt_regs *regs)
+asmlinkage long sys32_sigreturn(void)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	sigframe32 __user *frame = (sigframe32 __user *)regs->gprs[15];
 	sigset_t set;
 
@@ -370,8 +371,9 @@ badframe:
 	return 0;
 }
 
-asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys32_rt_sigreturn(void)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	rt_sigframe32 __user *frame = (rt_sigframe32 __user *)regs->gprs[15];
 	sigset_t set;
 	stack_t st;
@@ -407,8 +409,8 @@ asmlinkage long sys32_rt_sigreturn(struct pt_regs *regs)
 	return regs->gprs[2];
 
 badframe:
-        force_sig(SIGSEGV, current);
-        return 0;
+	force_sig(SIGSEGV, current);
+	return 0;
 }	
 
 /*
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 97901296894e..32a69a18a796 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1665,3 +1665,20 @@ sys_getcpu_wrapper:
 	llgtr	%r3,%r3			# unsigned *
 	llgtr	%r4,%r4			# struct getcpu_cache *
 	jg	sys_getcpu
+
+	.globl	compat_sys_epoll_pwait_wrapper
+compat_sys_epoll_pwait_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# struct compat_epoll_event *
+	lgfr	%r4,%r4			# int
+	lgfr	%r5,%r5			# int
+	llgtr	%r6,%r6			# compat_sigset_t *
+	llgf	%r0,164(%r15)		# compat_size_t
+	stg	%r0,160(%r15)
+	jg	compat_sys_epoll_pwait
+
+	.globl	compat_sys_utimes_wrapper
+compat_sys_utimes_wrapper:
+	llgtr	%r2,%r2			# char *
+	llgtr	%r3,%r3			# struct compat_timeval *
+	jg	compat_sys_utimes
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index eca3fe595ff4..dca6eaf82c80 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -268,7 +268,7 @@ debug_info_alloc(char *name, int pages_per_area, int nr_areas, int buf_size,
 	rc->level          = level;
 	rc->buf_size       = buf_size;
 	rc->entry_size     = sizeof(debug_entry_t) + buf_size;
-	strlcpy(rc->name, name, sizeof(rc->name)-1);
+	strlcpy(rc->name, name, sizeof(rc->name));
 	memset(rc->views, 0, DEBUG_MAX_VIEWS * sizeof(struct debug_view *));
 	memset(rc->debugfs_entries, 0 ,DEBUG_MAX_VIEWS *
 		sizeof(struct dentry*));
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
new file mode 100644
index 000000000000..dabaf98943d0
--- /dev/null
+++ b/arch/s390/kernel/dis.c
@@ -0,0 +1,1278 @@
+/*
+ * arch/s390/kernel/dis.c
+ *
+ * Disassemble s390 instructions.
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/reboot.h>
+#include <linux/kprobes.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/mathemu.h>
+#include <asm/cpcmd.h>
+#include <asm/s390_ext.h>
+#include <asm/lowcore.h>
+#include <asm/debug.h>
+#include <asm/kdebug.h>
+
+#ifndef CONFIG_64BIT
+#define ONELONG "%08lx: "
+#else /* CONFIG_64BIT */
+#define ONELONG "%016lx: "
+#endif /* CONFIG_64BIT */
+
+#define OPERAND_GPR	0x1	/* Operand printed as %rx */
+#define OPERAND_FPR	0x2	/* Operand printed as %fx */
+#define OPERAND_AR	0x4	/* Operand printed as %ax */
+#define OPERAND_CR	0x8	/* Operand printed as %cx */
+#define OPERAND_DISP	0x10	/* Operand printed as displacement */
+#define OPERAND_BASE	0x20	/* Operand printed as base register */
+#define OPERAND_INDEX	0x40	/* Operand printed as index register */
+#define OPERAND_PCREL	0x80	/* Operand printed as pc-relative symbol */
+#define OPERAND_SIGNED	0x100	/* Operand printed as signed value */
+#define OPERAND_LENGTH	0x200	/* Operand printed as length (+1) */
+
+enum {
+	UNUSED,	/* Indicates the end of the operand list */
+	R_8,	/* GPR starting at position 8 */
+	R_12,	/* GPR starting at position 12 */
+	R_16,	/* GPR starting at position 16 */
+	R_20,	/* GPR starting at position 20 */
+	R_24,	/* GPR starting at position 24 */
+	R_28,	/* GPR starting at position 28 */
+	R_32,	/* GPR starting at position 32 */
+	F_8,	/* FPR starting at position 8 */
+	F_12,	/* FPR starting at position 12 */
+	F_16,	/* FPR starting at position 16 */
+	F_20,	/* FPR starting at position 16 */
+	F_24,	/* FPR starting at position 24 */
+	F_28,	/* FPR starting at position 28 */
+	F_32,	/* FPR starting at position 32 */
+	A_8,	/* Access reg. starting at position 8 */
+	A_12,	/* Access reg. starting at position 12 */
+	A_24,	/* Access reg. starting at position 24 */
+	A_28,	/* Access reg. starting at position 28 */
+	C_8,	/* Control reg. starting at position 8 */
+	C_12,	/* Control reg. starting at position 12 */
+	B_16,	/* Base register starting at position 16 */
+	B_32,	/* Base register starting at position 32 */
+	X_12,	/* Index register starting at position 12 */
+	D_20,	/* Displacement starting at position 20 */
+	D_36,	/* Displacement starting at position 36 */
+	D20_20,	/* 20 bit displacement starting at 20 */
+	L4_8,	/* 4 bit length starting at position 8 */
+	L4_12,	/* 4 bit length starting at position 12 */
+	L8_8,	/* 8 bit length starting at position 8 */
+	U4_8,	/* 4 bit unsigned value starting at 8 */
+	U4_12,	/* 4 bit unsigned value starting at 12 */
+	U4_16,	/* 4 bit unsigned value starting at 16 */
+	U4_20,	/* 4 bit unsigned value starting at 20 */
+	U8_8,	/* 8 bit unsigned value starting at 8 */
+	U8_16,	/* 8 bit unsigned value starting at 16 */
+	I16_16,	/* 16 bit signed value starting at 16 */
+	U16_16,	/* 16 bit unsigned value starting at 16 */
+	J16_16,	/* PC relative jump offset at 16 */
+	J32_16,	/* PC relative long offset at 16 */
+	I32_16,	/* 32 bit signed value starting at 16 */
+	U32_16,	/* 32 bit unsigned value starting at 16 */
+	M_16,	/* 4 bit optional mask starting at 16 */
+	RO_28,	/* optional GPR starting at position 28 */
+};
+
+/*
+ * Enumeration of the different instruction formats.
+ * For details consult the principles of operation.
+ */
+enum {
+	INSTR_INVALID,
+	INSTR_E, INSTR_RIE_RRP, INSTR_RIL_RI, INSTR_RIL_RP, INSTR_RIL_RU,
+	INSTR_RIL_UP, INSTR_RI_RI, INSTR_RI_RP, INSTR_RI_RU, INSTR_RI_UP,
+	INSTR_RRE_00, INSTR_RRE_0R, INSTR_RRE_AA, INSTR_RRE_AR, INSTR_RRE_F0,
+	INSTR_RRE_FF, INSTR_RRE_R0, INSTR_RRE_RA, INSTR_RRE_RF, INSTR_RRE_RR,
+	INSTR_RRE_RR_OPT, INSTR_RRF_F0FF, INSTR_RRF_FUFF, INSTR_RRF_M0RR,
+	INSTR_RRF_R0RR, INSTR_RRF_RURR, INSTR_RRF_U0FF, INSTR_RRF_U0RF,
+	INSTR_RR_FF, INSTR_RR_R0, INSTR_RR_RR, INSTR_RR_U0, INSTR_RR_UR,
+	INSTR_RSE_CCRD, INSTR_RSE_RRRD, INSTR_RSE_RURD, INSTR_RSI_RRP,
+	INSTR_RSL_R0RD, INSTR_RSY_AARD, INSTR_RSY_CCRD, INSTR_RSY_RRRD,
+	INSTR_RSY_RURD, INSTR_RS_AARD, INSTR_RS_CCRD, INSTR_RS_R0RD,
+	INSTR_RS_RRRD, INSTR_RS_RURD, INSTR_RXE_FRRD, INSTR_RXE_RRRD,
+	INSTR_RXF_FRRDF, INSTR_RXY_FRRD, INSTR_RXY_RRRD, INSTR_RX_FRRD,
+	INSTR_RX_RRRD, INSTR_RX_URRD, INSTR_SIY_URD, INSTR_SI_URD,
+	INSTR_SSE_RDRD, INSTR_SSF_RRDRD, INSTR_SS_L0RDRD, INSTR_SS_LIRDRD,
+	INSTR_SS_LLRDRD, INSTR_SS_RRRDRD, INSTR_SS_RRRDRD2, INSTR_SS_RRRDRD3,
+	INSTR_S_00, INSTR_S_RD,
+};
+
+struct operand {
+	int bits;		/* The number of bits in the operand. */
+	int shift;		/* The number of bits to shift. */
+	int flags;		/* One bit syntax flags. */
+};
+
+struct insn {
+	const char name[5];
+	unsigned char opfrag;
+	unsigned char format;
+};
+
+static const struct operand operands[] =
+{
+	[UNUSED]  = { 0, 0, 0 },
+	[R_8]	 = {  4,  8, OPERAND_GPR },
+	[R_12]	 = {  4, 12, OPERAND_GPR },
+	[R_16]	 = {  4, 16, OPERAND_GPR },
+	[R_20]	 = {  4, 20, OPERAND_GPR },
+	[R_24]	 = {  4, 24, OPERAND_GPR },
+	[R_28]	 = {  4, 28, OPERAND_GPR },
+	[R_32]	 = {  4, 32, OPERAND_GPR },
+	[F_8]	 = {  4,  8, OPERAND_FPR },
+	[F_12]	 = {  4, 12, OPERAND_FPR },
+	[F_16]	 = {  4, 16, OPERAND_FPR },
+	[F_20]	 = {  4, 16, OPERAND_FPR },
+	[F_24]	 = {  4, 24, OPERAND_FPR },
+	[F_28]	 = {  4, 28, OPERAND_FPR },
+	[F_32]	 = {  4, 32, OPERAND_FPR },
+	[A_8]	 = {  4,  8, OPERAND_AR },
+	[A_12]	 = {  4, 12, OPERAND_AR },
+	[A_24]	 = {  4, 24, OPERAND_AR },
+	[A_28]	 = {  4, 28, OPERAND_AR },
+	[C_8]	 = {  4,  8, OPERAND_CR },
+	[C_12]	 = {  4, 12, OPERAND_CR },
+	[B_16]	 = {  4, 16, OPERAND_BASE | OPERAND_GPR },
+	[B_32]	 = {  4, 32, OPERAND_BASE | OPERAND_GPR },
+	[X_12]	 = {  4, 12, OPERAND_INDEX | OPERAND_GPR },
+	[D_20]	 = { 12, 20, OPERAND_DISP },
+	[D_36]	 = { 12, 36, OPERAND_DISP },
+	[D20_20] = { 20, 20, OPERAND_DISP | OPERAND_SIGNED },
+	[L4_8]	 = {  4,  8, OPERAND_LENGTH },
+	[L4_12]  = {  4, 12, OPERAND_LENGTH },
+	[L8_8]	 = {  8,  8, OPERAND_LENGTH },
+	[U4_8]	 = {  4,  8, 0 },
+	[U4_12]  = {  4, 12, 0 },
+	[U4_16]  = {  4, 16, 0 },
+	[U4_20]  = {  4, 20, 0 },
+	[U8_8]	 = {  8,  8, 0 },
+	[U8_16]  = {  8, 16, 0 },
+	[I16_16] = { 16, 16, OPERAND_SIGNED },
+	[U16_16] = { 16, 16, 0 },
+	[J16_16] = { 16, 16, OPERAND_PCREL },
+	[J32_16] = { 32, 16, OPERAND_PCREL },
+	[I32_16] = { 32, 16, OPERAND_SIGNED },
+	[U32_16] = { 32, 16, 0 },
+	[M_16]	 = {  4, 16, 0 },
+	[RO_28]  = {  4, 28, OPERAND_GPR }
+};
+
+static const unsigned char formats[][7] = {
+	[INSTR_E]	  = { 0xff, 0,0,0,0,0,0 },	       /* e.g. pr    */
+	[INSTR_RIE_RRP]	  = { 0xff, R_8,R_12,J16_16,0,0,0 },   /* e.g. brxhg */
+	[INSTR_RIL_RP]	  = { 0x0f, R_8,J32_16,0,0,0,0 },      /* e.g. brasl */
+	[INSTR_RIL_UP]	  = { 0x0f, U4_8,J32_16,0,0,0,0 },     /* e.g. brcl  */
+	[INSTR_RIL_RI]	  = { 0x0f, R_8,I32_16,0,0,0,0 },      /* e.g. afi   */
+	[INSTR_RIL_RU]	  = { 0x0f, R_8,U32_16,0,0,0,0 },      /* e.g. alfi  */
+	[INSTR_RI_RI]	  = { 0x0f, R_8,I16_16,0,0,0,0 },      /* e.g. ahi   */
+	[INSTR_RI_RP]	  = { 0x0f, R_8,J16_16,0,0,0,0 },      /* e.g. brct  */
+	[INSTR_RI_RU]	  = { 0x0f, R_8,U16_16,0,0,0,0 },      /* e.g. tml   */
+	[INSTR_RI_UP]	  = { 0x0f, U4_8,J16_16,0,0,0,0 },     /* e.g. brc   */
+	[INSTR_RRE_00]	  = { 0xff, 0,0,0,0,0,0 },	       /* e.g. palb  */
+	[INSTR_RRE_0R]	  = { 0xff, R_28,0,0,0,0,0 },	       /* e.g. tb    */
+	[INSTR_RRE_AA]	  = { 0xff, A_24,A_28,0,0,0,0 },       /* e.g. cpya  */
+	[INSTR_RRE_AR]	  = { 0xff, A_24,R_28,0,0,0,0 },       /* e.g. sar   */
+	[INSTR_RRE_F0]	  = { 0xff, F_24,0,0,0,0,0 },	       /* e.g. sqer  */
+	[INSTR_RRE_FF]	  = { 0xff, F_24,F_28,0,0,0,0 },       /* e.g. debr  */
+	[INSTR_RRE_R0]	  = { 0xff, R_24,0,0,0,0,0 },	       /* e.g. ipm   */
+	[INSTR_RRE_RA]	  = { 0xff, R_24,A_28,0,0,0,0 },       /* e.g. ear   */
+	[INSTR_RRE_RF]	  = { 0xff, R_24,F_28,0,0,0,0 },       /* e.g. cefbr */
+	[INSTR_RRE_RR]	  = { 0xff, R_24,R_28,0,0,0,0 },       /* e.g. lura  */
+	[INSTR_RRE_RR_OPT]= { 0xff, R_24,RO_28,0,0,0,0 },      /* efpc, sfpc */
+	[INSTR_RRF_F0FF]  = { 0xff, F_16,F_24,F_28,0,0,0 },    /* e.g. madbr */
+	[INSTR_RRF_FUFF]  = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
+	[INSTR_RRF_RURR]  = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
+	[INSTR_RRF_R0RR]  = { 0xff, R_24,R_28,R_16,0,0,0 },    /* e.g. idte  */
+	[INSTR_RRF_U0FF]  = { 0xff, F_24,U4_16,F_28,0,0,0 },   /* e.g. fixr  */
+	[INSTR_RRF_U0RF]  = { 0xff, R_24,U4_16,F_28,0,0,0 },   /* e.g. cfebr */
+	[INSTR_RRF_M0RR]  = { 0xff, R_24,R_28,M_16,0,0,0 },    /* e.g. sske  */
+	[INSTR_RR_FF]	  = { 0xff, F_8,F_12,0,0,0,0 },        /* e.g. adr   */
+	[INSTR_RR_R0]	  = { 0xff, R_8, 0,0,0,0,0 },	       /* e.g. spm   */
+	[INSTR_RR_RR]	  = { 0xff, R_8,R_12,0,0,0,0 },        /* e.g. lr    */
+	[INSTR_RR_U0]	  = { 0xff, U8_8, 0,0,0,0,0 },	       /* e.g. svc   */
+	[INSTR_RR_UR]	  = { 0xff, U4_8,R_12,0,0,0,0 },       /* e.g. bcr   */
+	[INSTR_RSE_RRRD]  = { 0xff, R_8,R_12,D_20,B_16,0,0 },  /* e.g. lmh   */
+	[INSTR_RSE_CCRD]  = { 0xff, C_8,C_12,D_20,B_16,0,0 },  /* e.g. lmh   */
+	[INSTR_RSE_RURD]  = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, /* e.g. icmh  */
+	[INSTR_RSL_R0RD]  = { 0xff, R_8,D_20,B_16,0,0,0 },     /* e.g. tp    */
+	[INSTR_RSI_RRP]	  = { 0xff, R_8,R_12,J16_16,0,0,0 },   /* e.g. brxh  */
+	[INSTR_RSY_RRRD]  = { 0xff, R_8,R_12,D20_20,B_16,0,0 },/* e.g. stmy  */
+	[INSTR_RSY_RURD]  = { 0xff, R_8,U4_12,D20_20,B_16,0,0 },
+							       /* e.g. icmh  */
+	[INSTR_RSY_AARD]  = { 0xff, A_8,A_12,D20_20,B_16,0,0 },/* e.g. lamy  */
+	[INSTR_RSY_CCRD]  = { 0xff, C_8,C_12,D20_20,B_16,0,0 },/* e.g. lamy  */
+	[INSTR_RS_AARD]	  = { 0xff, A_8,A_12,D_20,B_16,0,0 },  /* e.g. lam   */
+	[INSTR_RS_CCRD]	  = { 0xff, C_8,C_12,D_20,B_16,0,0 },  /* e.g. lctl  */
+	[INSTR_RS_R0RD]	  = { 0xff, R_8,D_20,B_16,0,0,0 },     /* e.g. sll   */
+	[INSTR_RS_RRRD]	  = { 0xff, R_8,R_12,D_20,B_16,0,0 },  /* e.g. cs    */
+	[INSTR_RS_RURD]	  = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, /* e.g. icm   */
+	[INSTR_RXE_FRRD]  = { 0xff, F_8,D_20,X_12,B_16,0,0 },  /* e.g. axbr  */
+	[INSTR_RXE_RRRD]  = { 0xff, R_8,D_20,X_12,B_16,0,0 },  /* e.g. lg    */
+	[INSTR_RXF_FRRDF] = { 0xff, F_32,F_8,D_20,X_12,B_16,0 },
+							       /* e.g. madb  */
+	[INSTR_RXY_RRRD]  = { 0xff, R_8,D20_20,X_12,B_16,0,0 },/* e.g. ly    */
+	[INSTR_RXY_FRRD]  = { 0xff, F_8,D20_20,X_12,B_16,0,0 },/* e.g. ley   */
+	[INSTR_RX_FRRD]	  = { 0xff, F_8,D_20,X_12,B_16,0,0 },  /* e.g. ae    */
+	[INSTR_RX_RRRD]	  = { 0xff, R_8,D_20,X_12,B_16,0,0 },  /* e.g. l     */
+	[INSTR_RX_URRD]	  = { 0x00, U4_8,D_20,X_12,B_16,0,0 }, /* e.g. bc    */
+	[INSTR_SI_URD]	  = { 0x00, D_20,B_16,U8_8,0,0,0 },    /* e.g. cli   */
+	[INSTR_SIY_URD]	  = { 0xff, D20_20,B_16,U8_8,0,0,0 },  /* e.g. tmy   */
+	[INSTR_SSE_RDRD]  = { 0xff, D_20,B_16,D_36,B_32,0,0 }, /* e.g. mvsdk */
+	[INSTR_SS_L0RDRD] = { 0xff, D_20,L8_8,B_16,D_36,B_32,0 },
+							       /* e.g. mvc   */
+	[INSTR_SS_LIRDRD] = { 0xff, D_20,L4_8,B_16,D_36,B_32,U4_12 },
+							       /* e.g. srp   */
+	[INSTR_SS_LLRDRD] = { 0xff, D_20,L4_8,B_16,D_36,L4_12,B_32 },
+							       /* e.g. pack  */
+	[INSTR_SS_RRRDRD] = { 0xff, D_20,R_8,B_16,D_36,B_32,R_12 },
+							       /* e.g. mvck  */
+	[INSTR_SS_RRRDRD2]= { 0xff, R_8,D_20,B_16,R_12,D_36,B_32 },
+							       /* e.g. plo   */
+	[INSTR_SS_RRRDRD3]= { 0xff, R_8,R_12,D_20,B_16,D_36,B_32 },
+							       /* e.g. lmd   */
+	[INSTR_S_00]	  = { 0xff, 0,0,0,0,0,0 },	       /* e.g. hsch  */
+	[INSTR_S_RD]	  = { 0xff, D_20,B_16,0,0,0,0 },       /* e.g. lpsw  */
+	[INSTR_SSF_RRDRD] = { 0x00, D_20,B_16,D_36,B_32,R_8,0 },
+							       /* e.g. mvcos */
+};
+
+static struct insn opcode[] = {
+#ifdef CONFIG_64BIT
+	{ "lmd", 0xef, INSTR_SS_RRRDRD3 },
+#endif
+	{ "spm", 0x04, INSTR_RR_R0 },
+	{ "balr", 0x05, INSTR_RR_RR },
+	{ "bctr", 0x06, INSTR_RR_RR },
+	{ "bcr", 0x07, INSTR_RR_UR },
+	{ "svc", 0x0a, INSTR_RR_U0 },
+	{ "bsm", 0x0b, INSTR_RR_RR },
+	{ "bassm", 0x0c, INSTR_RR_RR },
+	{ "basr", 0x0d, INSTR_RR_RR },
+	{ "mvcl", 0x0e, INSTR_RR_RR },
+	{ "clcl", 0x0f, INSTR_RR_RR },
+	{ "lpr", 0x10, INSTR_RR_RR },
+	{ "lnr", 0x11, INSTR_RR_RR },
+	{ "ltr", 0x12, INSTR_RR_RR },
+	{ "lcr", 0x13, INSTR_RR_RR },
+	{ "nr", 0x14, INSTR_RR_RR },
+	{ "clr", 0x15, INSTR_RR_RR },
+	{ "or", 0x16, INSTR_RR_RR },
+	{ "xr", 0x17, INSTR_RR_RR },
+	{ "lr", 0x18, INSTR_RR_RR },
+	{ "cr", 0x19, INSTR_RR_RR },
+	{ "ar", 0x1a, INSTR_RR_RR },
+	{ "sr", 0x1b, INSTR_RR_RR },
+	{ "mr", 0x1c, INSTR_RR_RR },
+	{ "dr", 0x1d, INSTR_RR_RR },
+	{ "alr", 0x1e, INSTR_RR_RR },
+	{ "slr", 0x1f, INSTR_RR_RR },
+	{ "lpdr", 0x20, INSTR_RR_FF },
+	{ "lndr", 0x21, INSTR_RR_FF },
+	{ "ltdr", 0x22, INSTR_RR_FF },
+	{ "lcdr", 0x23, INSTR_RR_FF },
+	{ "hdr", 0x24, INSTR_RR_FF },
+	{ "ldxr", 0x25, INSTR_RR_FF },
+	{ "lrdr", 0x25, INSTR_RR_FF },
+	{ "mxr", 0x26, INSTR_RR_FF },
+	{ "mxdr", 0x27, INSTR_RR_FF },
+	{ "ldr", 0x28, INSTR_RR_FF },
+	{ "cdr", 0x29, INSTR_RR_FF },
+	{ "adr", 0x2a, INSTR_RR_FF },
+	{ "sdr", 0x2b, INSTR_RR_FF },
+	{ "mdr", 0x2c, INSTR_RR_FF },
+	{ "ddr", 0x2d, INSTR_RR_FF },
+	{ "awr", 0x2e, INSTR_RR_FF },
+	{ "swr", 0x2f, INSTR_RR_FF },
+	{ "lper", 0x30, INSTR_RR_FF },
+	{ "lner", 0x31, INSTR_RR_FF },
+	{ "lter", 0x32, INSTR_RR_FF },
+	{ "lcer", 0x33, INSTR_RR_FF },
+	{ "her", 0x34, INSTR_RR_FF },
+	{ "ledr", 0x35, INSTR_RR_FF },
+	{ "lrer", 0x35, INSTR_RR_FF },
+	{ "axr", 0x36, INSTR_RR_FF },
+	{ "sxr", 0x37, INSTR_RR_FF },
+	{ "ler", 0x38, INSTR_RR_FF },
+	{ "cer", 0x39, INSTR_RR_FF },
+	{ "aer", 0x3a, INSTR_RR_FF },
+	{ "ser", 0x3b, INSTR_RR_FF },
+	{ "mder", 0x3c, INSTR_RR_FF },
+	{ "mer", 0x3c, INSTR_RR_FF },
+	{ "der", 0x3d, INSTR_RR_FF },
+	{ "aur", 0x3e, INSTR_RR_FF },
+	{ "sur", 0x3f, INSTR_RR_FF },
+	{ "sth", 0x40, INSTR_RX_RRRD },
+	{ "la", 0x41, INSTR_RX_RRRD },
+	{ "stc", 0x42, INSTR_RX_RRRD },
+	{ "ic", 0x43, INSTR_RX_RRRD },
+	{ "ex", 0x44, INSTR_RX_RRRD },
+	{ "bal", 0x45, INSTR_RX_RRRD },
+	{ "bct", 0x46, INSTR_RX_RRRD },
+	{ "bc", 0x47, INSTR_RX_URRD },
+	{ "lh", 0x48, INSTR_RX_RRRD },
+	{ "ch", 0x49, INSTR_RX_RRRD },
+	{ "ah", 0x4a, INSTR_RX_RRRD },
+	{ "sh", 0x4b, INSTR_RX_RRRD },
+	{ "mh", 0x4c, INSTR_RX_RRRD },
+	{ "bas", 0x4d, INSTR_RX_RRRD },
+	{ "cvd", 0x4e, INSTR_RX_RRRD },
+	{ "cvb", 0x4f, INSTR_RX_RRRD },
+	{ "st", 0x50, INSTR_RX_RRRD },
+	{ "lae", 0x51, INSTR_RX_RRRD },
+	{ "n", 0x54, INSTR_RX_RRRD },
+	{ "cl", 0x55, INSTR_RX_RRRD },
+	{ "o", 0x56, INSTR_RX_RRRD },
+	{ "x", 0x57, INSTR_RX_RRRD },
+	{ "l", 0x58, INSTR_RX_RRRD },
+	{ "c", 0x59, INSTR_RX_RRRD },
+	{ "a", 0x5a, INSTR_RX_RRRD },
+	{ "s", 0x5b, INSTR_RX_RRRD },
+	{ "m", 0x5c, INSTR_RX_RRRD },
+	{ "d", 0x5d, INSTR_RX_RRRD },
+	{ "al", 0x5e, INSTR_RX_RRRD },
+	{ "sl", 0x5f, INSTR_RX_RRRD },
+	{ "std", 0x60, INSTR_RX_FRRD },
+	{ "mxd", 0x67, INSTR_RX_FRRD },
+	{ "ld", 0x68, INSTR_RX_FRRD },
+	{ "cd", 0x69, INSTR_RX_FRRD },
+	{ "ad", 0x6a, INSTR_RX_FRRD },
+	{ "sd", 0x6b, INSTR_RX_FRRD },
+	{ "md", 0x6c, INSTR_RX_FRRD },
+	{ "dd", 0x6d, INSTR_RX_FRRD },
+	{ "aw", 0x6e, INSTR_RX_FRRD },
+	{ "sw", 0x6f, INSTR_RX_FRRD },
+	{ "ste", 0x70, INSTR_RX_FRRD },
+	{ "ms", 0x71, INSTR_RX_RRRD },
+	{ "le", 0x78, INSTR_RX_FRRD },
+	{ "ce", 0x79, INSTR_RX_FRRD },
+	{ "ae", 0x7a, INSTR_RX_FRRD },
+	{ "se", 0x7b, INSTR_RX_FRRD },
+	{ "mde", 0x7c, INSTR_RX_FRRD },
+	{ "me", 0x7c, INSTR_RX_FRRD },
+	{ "de", 0x7d, INSTR_RX_FRRD },
+	{ "au", 0x7e, INSTR_RX_FRRD },
+	{ "su", 0x7f, INSTR_RX_FRRD },
+	{ "ssm", 0x80, INSTR_S_RD },
+	{ "lpsw", 0x82, INSTR_S_RD },
+	{ "diag", 0x83, INSTR_RS_RRRD },
+	{ "brxh", 0x84, INSTR_RSI_RRP },
+	{ "brxle", 0x85, INSTR_RSI_RRP },
+	{ "bxh", 0x86, INSTR_RS_RRRD },
+	{ "bxle", 0x87, INSTR_RS_RRRD },
+	{ "srl", 0x88, INSTR_RS_R0RD },
+	{ "sll", 0x89, INSTR_RS_R0RD },
+	{ "sra", 0x8a, INSTR_RS_R0RD },
+	{ "sla", 0x8b, INSTR_RS_R0RD },
+	{ "srdl", 0x8c, INSTR_RS_R0RD },
+	{ "sldl", 0x8d, INSTR_RS_R0RD },
+	{ "srda", 0x8e, INSTR_RS_R0RD },
+	{ "slda", 0x8f, INSTR_RS_R0RD },
+	{ "stm", 0x90, INSTR_RS_RRRD },
+	{ "tm", 0x91, INSTR_SI_URD },
+	{ "mvi", 0x92, INSTR_SI_URD },
+	{ "ts", 0x93, INSTR_S_RD },
+	{ "ni", 0x94, INSTR_SI_URD },
+	{ "cli", 0x95, INSTR_SI_URD },
+	{ "oi", 0x96, INSTR_SI_URD },
+	{ "xi", 0x97, INSTR_SI_URD },
+	{ "lm", 0x98, INSTR_RS_RRRD },
+	{ "trace", 0x99, INSTR_RS_RRRD },
+	{ "lam", 0x9a, INSTR_RS_AARD },
+	{ "stam", 0x9b, INSTR_RS_AARD },
+	{ "mvcle", 0xa8, INSTR_RS_RRRD },
+	{ "clcle", 0xa9, INSTR_RS_RRRD },
+	{ "stnsm", 0xac, INSTR_SI_URD },
+	{ "stosm", 0xad, INSTR_SI_URD },
+	{ "sigp", 0xae, INSTR_RS_RRRD },
+	{ "mc", 0xaf, INSTR_SI_URD },
+	{ "lra", 0xb1, INSTR_RX_RRRD },
+	{ "stctl", 0xb6, INSTR_RS_CCRD },
+	{ "lctl", 0xb7, INSTR_RS_CCRD },
+	{ "cs", 0xba, INSTR_RS_RRRD },
+	{ "cds", 0xbb, INSTR_RS_RRRD },
+	{ "clm", 0xbd, INSTR_RS_RURD },
+	{ "stcm", 0xbe, INSTR_RS_RURD },
+	{ "icm", 0xbf, INSTR_RS_RURD },
+	{ "mvn", 0xd1, INSTR_SS_L0RDRD },
+	{ "mvc", 0xd2, INSTR_SS_L0RDRD },
+	{ "mvz", 0xd3, INSTR_SS_L0RDRD },
+	{ "nc", 0xd4, INSTR_SS_L0RDRD },
+	{ "clc", 0xd5, INSTR_SS_L0RDRD },
+	{ "oc", 0xd6, INSTR_SS_L0RDRD },
+	{ "xc", 0xd7, INSTR_SS_L0RDRD },
+	{ "mvck", 0xd9, INSTR_SS_RRRDRD },
+	{ "mvcp", 0xda, INSTR_SS_RRRDRD },
+	{ "mvcs", 0xdb, INSTR_SS_RRRDRD },
+	{ "tr", 0xdc, INSTR_SS_L0RDRD },
+	{ "trt", 0xdd, INSTR_SS_L0RDRD },
+	{ "ed", 0xde, INSTR_SS_L0RDRD },
+	{ "edmk", 0xdf, INSTR_SS_L0RDRD },
+	{ "pku", 0xe1, INSTR_SS_L0RDRD },
+	{ "unpku", 0xe2, INSTR_SS_L0RDRD },
+	{ "mvcin", 0xe8, INSTR_SS_L0RDRD },
+	{ "pka", 0xe9, INSTR_SS_L0RDRD },
+	{ "unpka", 0xea, INSTR_SS_L0RDRD },
+	{ "plo", 0xee, INSTR_SS_RRRDRD2 },
+	{ "srp", 0xf0, INSTR_SS_LIRDRD },
+	{ "mvo", 0xf1, INSTR_SS_LLRDRD },
+	{ "pack", 0xf2, INSTR_SS_LLRDRD },
+	{ "unpk", 0xf3, INSTR_SS_LLRDRD },
+	{ "zap", 0xf8, INSTR_SS_LLRDRD },
+	{ "cp", 0xf9, INSTR_SS_LLRDRD },
+	{ "ap", 0xfa, INSTR_SS_LLRDRD },
+	{ "sp", 0xfb, INSTR_SS_LLRDRD },
+	{ "mp", 0xfc, INSTR_SS_LLRDRD },
+	{ "dp", 0xfd, INSTR_SS_LLRDRD },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_01[] = {
+#ifdef CONFIG_64BIT
+	{ "sam64", 0x0e, INSTR_E },
+#endif
+	{ "pr", 0x01, INSTR_E },
+	{ "upt", 0x02, INSTR_E },
+	{ "sckpf", 0x07, INSTR_E },
+	{ "tam", 0x0b, INSTR_E },
+	{ "sam24", 0x0c, INSTR_E },
+	{ "sam31", 0x0d, INSTR_E },
+	{ "trap2", 0xff, INSTR_E },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_a5[] = {
+#ifdef CONFIG_64BIT
+	{ "iihh", 0x00, INSTR_RI_RU },
+	{ "iihl", 0x01, INSTR_RI_RU },
+	{ "iilh", 0x02, INSTR_RI_RU },
+	{ "iill", 0x03, INSTR_RI_RU },
+	{ "nihh", 0x04, INSTR_RI_RU },
+	{ "nihl", 0x05, INSTR_RI_RU },
+	{ "nilh", 0x06, INSTR_RI_RU },
+	{ "nill", 0x07, INSTR_RI_RU },
+	{ "oihh", 0x08, INSTR_RI_RU },
+	{ "oihl", 0x09, INSTR_RI_RU },
+	{ "oilh", 0x0a, INSTR_RI_RU },
+	{ "oill", 0x0b, INSTR_RI_RU },
+	{ "llihh", 0x0c, INSTR_RI_RU },
+	{ "llihl", 0x0d, INSTR_RI_RU },
+	{ "llilh", 0x0e, INSTR_RI_RU },
+	{ "llill", 0x0f, INSTR_RI_RU },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_a7[] = {
+#ifdef CONFIG_64BIT
+	{ "tmhh", 0x02, INSTR_RI_RU },
+	{ "tmhl", 0x03, INSTR_RI_RU },
+	{ "brctg", 0x07, INSTR_RI_RP },
+	{ "lghi", 0x09, INSTR_RI_RI },
+	{ "aghi", 0x0b, INSTR_RI_RI },
+	{ "mghi", 0x0d, INSTR_RI_RI },
+	{ "cghi", 0x0f, INSTR_RI_RI },
+#endif
+	{ "tmlh", 0x00, INSTR_RI_RU },
+	{ "tmll", 0x01, INSTR_RI_RU },
+	{ "brc", 0x04, INSTR_RI_UP },
+	{ "bras", 0x05, INSTR_RI_RP },
+	{ "brct", 0x06, INSTR_RI_RP },
+	{ "lhi", 0x08, INSTR_RI_RI },
+	{ "ahi", 0x0a, INSTR_RI_RI },
+	{ "mhi", 0x0c, INSTR_RI_RI },
+	{ "chi", 0x0e, INSTR_RI_RI },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_b2[] = {
+#ifdef CONFIG_64BIT
+	{ "sske", 0x2b, INSTR_RRF_M0RR },
+	{ "stckf", 0x7c, INSTR_S_RD },
+	{ "cu21", 0xa6, INSTR_RRF_M0RR },
+	{ "cuutf", 0xa6, INSTR_RRF_M0RR },
+	{ "cu12", 0xa7, INSTR_RRF_M0RR },
+	{ "cutfu", 0xa7, INSTR_RRF_M0RR },
+	{ "stfle", 0xb0, INSTR_S_RD },
+	{ "lpswe", 0xb2, INSTR_S_RD },
+#endif
+	{ "stidp", 0x02, INSTR_S_RD },
+	{ "sck", 0x04, INSTR_S_RD },
+	{ "stck", 0x05, INSTR_S_RD },
+	{ "sckc", 0x06, INSTR_S_RD },
+	{ "stckc", 0x07, INSTR_S_RD },
+	{ "spt", 0x08, INSTR_S_RD },
+	{ "stpt", 0x09, INSTR_S_RD },
+	{ "spka", 0x0a, INSTR_S_RD },
+	{ "ipk", 0x0b, INSTR_S_00 },
+	{ "ptlb", 0x0d, INSTR_S_00 },
+	{ "spx", 0x10, INSTR_S_RD },
+	{ "stpx", 0x11, INSTR_S_RD },
+	{ "stap", 0x12, INSTR_S_RD },
+	{ "sie", 0x14, INSTR_S_RD },
+	{ "pc", 0x18, INSTR_S_RD },
+	{ "sac", 0x19, INSTR_S_RD },
+	{ "cfc", 0x1a, INSTR_S_RD },
+	{ "ipte", 0x21, INSTR_RRE_RR },
+	{ "ipm", 0x22, INSTR_RRE_R0 },
+	{ "ivsk", 0x23, INSTR_RRE_RR },
+	{ "iac", 0x24, INSTR_RRE_R0 },
+	{ "ssar", 0x25, INSTR_RRE_R0 },
+	{ "epar", 0x26, INSTR_RRE_R0 },
+	{ "esar", 0x27, INSTR_RRE_R0 },
+	{ "pt", 0x28, INSTR_RRE_RR },
+	{ "iske", 0x29, INSTR_RRE_RR },
+	{ "rrbe", 0x2a, INSTR_RRE_RR },
+	{ "sske", 0x2b, INSTR_RRE_RR },
+	{ "tb", 0x2c, INSTR_RRE_0R },
+	{ "dxr", 0x2d, INSTR_RRE_F0 },
+	{ "pgin", 0x2e, INSTR_RRE_RR },
+	{ "pgout", 0x2f, INSTR_RRE_RR },
+	{ "csch", 0x30, INSTR_S_00 },
+	{ "hsch", 0x31, INSTR_S_00 },
+	{ "msch", 0x32, INSTR_S_RD },
+	{ "ssch", 0x33, INSTR_S_RD },
+	{ "stsch", 0x34, INSTR_S_RD },
+	{ "tsch", 0x35, INSTR_S_RD },
+	{ "tpi", 0x36, INSTR_S_RD },
+	{ "sal", 0x37, INSTR_S_00 },
+	{ "rsch", 0x38, INSTR_S_00 },
+	{ "stcrw", 0x39, INSTR_S_RD },
+	{ "stcps", 0x3a, INSTR_S_RD },
+	{ "rchp", 0x3b, INSTR_S_00 },
+	{ "schm", 0x3c, INSTR_S_00 },
+	{ "bakr", 0x40, INSTR_RRE_RR },
+	{ "cksm", 0x41, INSTR_RRE_RR },
+	{ "sqdr", 0x44, INSTR_RRE_F0 },
+	{ "sqer", 0x45, INSTR_RRE_F0 },
+	{ "stura", 0x46, INSTR_RRE_RR },
+	{ "msta", 0x47, INSTR_RRE_R0 },
+	{ "palb", 0x48, INSTR_RRE_00 },
+	{ "ereg", 0x49, INSTR_RRE_RR },
+	{ "esta", 0x4a, INSTR_RRE_RR },
+	{ "lura", 0x4b, INSTR_RRE_RR },
+	{ "tar", 0x4c, INSTR_RRE_AR },
+	{ "cpya", INSTR_RRE_AA },
+	{ "sar", 0x4e, INSTR_RRE_AR },
+	{ "ear", 0x4f, INSTR_RRE_RA },
+	{ "csp", 0x50, INSTR_RRE_RR },
+	{ "msr", 0x52, INSTR_RRE_RR },
+	{ "mvpg", 0x54, INSTR_RRE_RR },
+	{ "mvst", 0x55, INSTR_RRE_RR },
+	{ "cuse", 0x57, INSTR_RRE_RR },
+	{ "bsg", 0x58, INSTR_RRE_RR },
+	{ "bsa", 0x5a, INSTR_RRE_RR },
+	{ "clst", 0x5d, INSTR_RRE_RR },
+	{ "srst", 0x5e, INSTR_RRE_RR },
+	{ "cmpsc", 0x63, INSTR_RRE_RR },
+	{ "cmpsc", 0x63, INSTR_RRE_RR },
+	{ "siga", 0x74, INSTR_S_RD },
+	{ "xsch", 0x76, INSTR_S_00 },
+	{ "rp", 0x77, INSTR_S_RD },
+	{ "stcke", 0x78, INSTR_S_RD },
+	{ "sacf", 0x79, INSTR_S_RD },
+	{ "stsi", 0x7d, INSTR_S_RD },
+	{ "srnm", 0x99, INSTR_S_RD },
+	{ "stfpc", 0x9c, INSTR_S_RD },
+	{ "lfpc", 0x9d, INSTR_S_RD },
+	{ "tre", 0xa5, INSTR_RRE_RR },
+	{ "cuutf", 0xa6, INSTR_RRE_RR },
+	{ "cutfu", 0xa7, INSTR_RRE_RR },
+	{ "stfl", 0xb1, INSTR_S_RD },
+	{ "trap4", 0xff, INSTR_S_RD },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_b3[] = {
+#ifdef CONFIG_64BIT
+	{ "maylr", 0x38, INSTR_RRF_F0FF },
+	{ "mylr", 0x39, INSTR_RRF_F0FF },
+	{ "mayr", 0x3a, INSTR_RRF_F0FF },
+	{ "myr", 0x3b, INSTR_RRF_F0FF },
+	{ "mayhr", 0x3c, INSTR_RRF_F0FF },
+	{ "myhr", 0x3d, INSTR_RRF_F0FF },
+	{ "cegbr", 0xa4, INSTR_RRE_RR },
+	{ "cdgbr", 0xa5, INSTR_RRE_RR },
+	{ "cxgbr", 0xa6, INSTR_RRE_RR },
+	{ "cgebr", 0xa8, INSTR_RRF_U0RF },
+	{ "cgdbr", 0xa9, INSTR_RRF_U0RF },
+	{ "cgxbr", 0xaa, INSTR_RRF_U0RF },
+	{ "cfer", 0xb8, INSTR_RRF_U0RF },
+	{ "cfdr", 0xb9, INSTR_RRF_U0RF },
+	{ "cfxr", 0xba, INSTR_RRF_U0RF },
+	{ "cegr", 0xc4, INSTR_RRE_RR },
+	{ "cdgr", 0xc5, INSTR_RRE_RR },
+	{ "cxgr", 0xc6, INSTR_RRE_RR },
+	{ "cger", 0xc8, INSTR_RRF_U0RF },
+	{ "cgdr", 0xc9, INSTR_RRF_U0RF },
+	{ "cgxr", 0xca, INSTR_RRF_U0RF },
+#endif
+	{ "lpebr", 0x00, INSTR_RRE_FF },
+	{ "lnebr", 0x01, INSTR_RRE_FF },
+	{ "ltebr", 0x02, INSTR_RRE_FF },
+	{ "lcebr", 0x03, INSTR_RRE_FF },
+	{ "ldebr", 0x04, INSTR_RRE_FF },
+	{ "lxdbr", 0x05, INSTR_RRE_FF },
+	{ "lxebr", 0x06, INSTR_RRE_FF },
+	{ "mxdbr", 0x07, INSTR_RRE_FF },
+	{ "kebr", 0x08, INSTR_RRE_FF },
+	{ "cebr", 0x09, INSTR_RRE_FF },
+	{ "aebr", 0x0a, INSTR_RRE_FF },
+	{ "sebr", 0x0b, INSTR_RRE_FF },
+	{ "mdebr", 0x0c, INSTR_RRE_FF },
+	{ "debr", 0x0d, INSTR_RRE_FF },
+	{ "maebr", 0x0e, INSTR_RRF_F0FF },
+	{ "msebr", 0x0f, INSTR_RRF_F0FF },
+	{ "lpdbr", 0x10, INSTR_RRE_FF },
+	{ "lndbr", 0x11, INSTR_RRE_FF },
+	{ "ltdbr", 0x12, INSTR_RRE_FF },
+	{ "lcdbr", 0x13, INSTR_RRE_FF },
+	{ "sqebr", 0x14, INSTR_RRE_FF },
+	{ "sqdbr", 0x15, INSTR_RRE_FF },
+	{ "sqxbr", 0x16, INSTR_RRE_FF },
+	{ "meebr", 0x17, INSTR_RRE_FF },
+	{ "kdbr", 0x18, INSTR_RRE_FF },
+	{ "cdbr", 0x19, INSTR_RRE_FF },
+	{ "adbr", 0x1a, INSTR_RRE_FF },
+	{ "sdbr", 0x1b, INSTR_RRE_FF },
+	{ "mdbr", 0x1c, INSTR_RRE_FF },
+	{ "ddbr", 0x1d, INSTR_RRE_FF },
+	{ "madbr", 0x1e, INSTR_RRF_F0FF },
+	{ "msdbr", 0x1f, INSTR_RRF_F0FF },
+	{ "lder", 0x24, INSTR_RRE_FF },
+	{ "lxdr", 0x25, INSTR_RRE_FF },
+	{ "lxer", 0x26, INSTR_RRE_FF },
+	{ "maer", 0x2e, INSTR_RRF_F0FF },
+	{ "mser", 0x2f, INSTR_RRF_F0FF },
+	{ "sqxr", 0x36, INSTR_RRE_FF },
+	{ "meer", 0x37, INSTR_RRE_FF },
+	{ "madr", 0x3e, INSTR_RRF_F0FF },
+	{ "msdr", 0x3f, INSTR_RRF_F0FF },
+	{ "lpxbr", 0x40, INSTR_RRE_FF },
+	{ "lnxbr", 0x41, INSTR_RRE_FF },
+	{ "ltxbr", 0x42, INSTR_RRE_FF },
+	{ "lcxbr", 0x43, INSTR_RRE_FF },
+	{ "ledbr", 0x44, INSTR_RRE_FF },
+	{ "ldxbr", 0x45, INSTR_RRE_FF },
+	{ "lexbr", 0x46, INSTR_RRE_FF },
+	{ "fixbr", 0x47, INSTR_RRF_U0FF },
+	{ "kxbr", 0x48, INSTR_RRE_FF },
+	{ "cxbr", 0x49, INSTR_RRE_FF },
+	{ "axbr", 0x4a, INSTR_RRE_FF },
+	{ "sxbr", 0x4b, INSTR_RRE_FF },
+	{ "mxbr", 0x4c, INSTR_RRE_FF },
+	{ "dxbr", 0x4d, INSTR_RRE_FF },
+	{ "tbedr", 0x50, INSTR_RRF_U0FF },
+	{ "tbdr", 0x51, INSTR_RRF_U0FF },
+	{ "diebr", 0x53, INSTR_RRF_FUFF },
+	{ "fiebr", 0x57, INSTR_RRF_U0FF },
+	{ "thder", 0x58, INSTR_RRE_RR },
+	{ "thdr", 0x59, INSTR_RRE_RR },
+	{ "didbr", 0x5b, INSTR_RRF_FUFF },
+	{ "fidbr", 0x5f, INSTR_RRF_U0FF },
+	{ "lpxr", 0x60, INSTR_RRE_FF },
+	{ "lnxr", 0x61, INSTR_RRE_FF },
+	{ "ltxr", 0x62, INSTR_RRE_FF },
+	{ "lcxr", 0x63, INSTR_RRE_FF },
+	{ "lxr", 0x65, INSTR_RRE_RR },
+	{ "lexr", 0x66, INSTR_RRE_FF },
+	{ "fixr", 0x67, INSTR_RRF_U0FF },
+	{ "cxr", 0x69, INSTR_RRE_FF },
+	{ "lzer", 0x74, INSTR_RRE_R0 },
+	{ "lzdr", 0x75, INSTR_RRE_R0 },
+	{ "lzxr", 0x76, INSTR_RRE_R0 },
+	{ "fier", 0x77, INSTR_RRF_U0FF },
+	{ "fidr", 0x7f, INSTR_RRF_U0FF },
+	{ "sfpc", 0x84, INSTR_RRE_RR_OPT },
+	{ "efpc", 0x8c, INSTR_RRE_RR_OPT },
+	{ "cefbr", 0x94, INSTR_RRE_RF },
+	{ "cdfbr", 0x95, INSTR_RRE_RF },
+	{ "cxfbr", 0x96, INSTR_RRE_RF },
+	{ "cfebr", 0x98, INSTR_RRF_U0RF },
+	{ "cfdbr", 0x99, INSTR_RRF_U0RF },
+	{ "cfxbr", 0x9a, INSTR_RRF_U0RF },
+	{ "cefr", 0xb4, INSTR_RRE_RF },
+	{ "cdfr", 0xb5, INSTR_RRE_RF },
+	{ "cxfr", 0xb6, INSTR_RRE_RF },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_b9[] = {
+#ifdef CONFIG_64BIT
+	{ "lpgr", 0x00, INSTR_RRE_RR },
+	{ "lngr", 0x01, INSTR_RRE_RR },
+	{ "ltgr", 0x02, INSTR_RRE_RR },
+	{ "lcgr", 0x03, INSTR_RRE_RR },
+	{ "lgr", 0x04, INSTR_RRE_RR },
+	{ "lurag", 0x05, INSTR_RRE_RR },
+	{ "lgbr", 0x06, INSTR_RRE_RR },
+	{ "lghr", 0x07, INSTR_RRE_RR },
+	{ "agr", 0x08, INSTR_RRE_RR },
+	{ "sgr", 0x09, INSTR_RRE_RR },
+	{ "algr", 0x0a, INSTR_RRE_RR },
+	{ "slgr", 0x0b, INSTR_RRE_RR },
+	{ "msgr", 0x0c, INSTR_RRE_RR },
+	{ "dsgr", 0x0d, INSTR_RRE_RR },
+	{ "eregg", 0x0e, INSTR_RRE_RR },
+	{ "lrvgr", 0x0f, INSTR_RRE_RR },
+	{ "lpgfr", 0x10, INSTR_RRE_RR },
+	{ "lngfr", 0x11, INSTR_RRE_RR },
+	{ "ltgfr", 0x12, INSTR_RRE_RR },
+	{ "lcgfr", 0x13, INSTR_RRE_RR },
+	{ "lgfr", 0x14, INSTR_RRE_RR },
+	{ "llgfr", 0x16, INSTR_RRE_RR },
+	{ "llgtr", 0x17, INSTR_RRE_RR },
+	{ "agfr", 0x18, INSTR_RRE_RR },
+	{ "sgfr", 0x19, INSTR_RRE_RR },
+	{ "algfr", 0x1a, INSTR_RRE_RR },
+	{ "slgfr", 0x1b, INSTR_RRE_RR },
+	{ "msgfr", 0x1c, INSTR_RRE_RR },
+	{ "dsgfr", 0x1d, INSTR_RRE_RR },
+	{ "cgr", 0x20, INSTR_RRE_RR },
+	{ "clgr", 0x21, INSTR_RRE_RR },
+	{ "sturg", 0x25, INSTR_RRE_RR },
+	{ "lbr", 0x26, INSTR_RRE_RR },
+	{ "lhr", 0x27, INSTR_RRE_RR },
+	{ "cgfr", 0x30, INSTR_RRE_RR },
+	{ "clgfr", 0x31, INSTR_RRE_RR },
+	{ "bctgr", 0x46, INSTR_RRE_RR },
+	{ "ngr", 0x80, INSTR_RRE_RR },
+	{ "ogr", 0x81, INSTR_RRE_RR },
+	{ "xgr", 0x82, INSTR_RRE_RR },
+	{ "flogr", 0x83, INSTR_RRE_RR },
+	{ "llgcr", 0x84, INSTR_RRE_RR },
+	{ "llghr", 0x85, INSTR_RRE_RR },
+	{ "mlgr", 0x86, INSTR_RRE_RR },
+	{ "dlgr", 0x87, INSTR_RRE_RR },
+	{ "alcgr", 0x88, INSTR_RRE_RR },
+	{ "slbgr", 0x89, INSTR_RRE_RR },
+	{ "cspg", 0x8a, INSTR_RRE_RR },
+	{ "idte", 0x8e, INSTR_RRF_R0RR },
+	{ "llcr", 0x94, INSTR_RRE_RR },
+	{ "llhr", 0x95, INSTR_RRE_RR },
+	{ "esea", 0x9d, INSTR_RRE_R0 },
+	{ "lptea", 0xaa, INSTR_RRF_RURR },
+	{ "cu14", 0xb0, INSTR_RRF_M0RR },
+	{ "cu24", 0xb1, INSTR_RRF_M0RR },
+	{ "cu41", 0xb2, INSTR_RRF_M0RR },
+	{ "cu42", 0xb3, INSTR_RRF_M0RR },
+#endif
+	{ "kmac", 0x1e, INSTR_RRE_RR },
+	{ "lrvr", 0x1f, INSTR_RRE_RR },
+	{ "km", 0x2e, INSTR_RRE_RR },
+	{ "kmc", 0x2f, INSTR_RRE_RR },
+	{ "kimd", 0x3e, INSTR_RRE_RR },
+	{ "klmd", 0x3f, INSTR_RRE_RR },
+	{ "epsw", 0x8d, INSTR_RRE_RR },
+	{ "trtt", 0x90, INSTR_RRE_RR },
+	{ "trtt", 0x90, INSTR_RRF_M0RR },
+	{ "trto", 0x91, INSTR_RRE_RR },
+	{ "trto", 0x91, INSTR_RRF_M0RR },
+	{ "trot", 0x92, INSTR_RRE_RR },
+	{ "trot", 0x92, INSTR_RRF_M0RR },
+	{ "troo", 0x93, INSTR_RRE_RR },
+	{ "troo", 0x93, INSTR_RRF_M0RR },
+	{ "mlr", 0x96, INSTR_RRE_RR },
+	{ "dlr", 0x97, INSTR_RRE_RR },
+	{ "alcr", 0x98, INSTR_RRE_RR },
+	{ "slbr", 0x99, INSTR_RRE_RR },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_c0[] = {
+#ifdef CONFIG_64BIT
+	{ "lgfi", 0x01, INSTR_RIL_RI },
+	{ "xihf", 0x06, INSTR_RIL_RU },
+	{ "xilf", 0x07, INSTR_RIL_RU },
+	{ "iihf", 0x08, INSTR_RIL_RU },
+	{ "iilf", 0x09, INSTR_RIL_RU },
+	{ "nihf", 0x0a, INSTR_RIL_RU },
+	{ "nilf", 0x0b, INSTR_RIL_RU },
+	{ "oihf", 0x0c, INSTR_RIL_RU },
+	{ "oilf", 0x0d, INSTR_RIL_RU },
+	{ "llihf", 0x0e, INSTR_RIL_RU },
+	{ "llilf", 0x0f, INSTR_RIL_RU },
+#endif
+	{ "larl", 0x00, INSTR_RIL_RP },
+	{ "brcl", 0x04, INSTR_RIL_UP },
+	{ "brasl", 0x05, INSTR_RIL_RP },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_c2[] = {
+#ifdef CONFIG_64BIT
+	{ "slgfi", 0x04, INSTR_RIL_RU },
+	{ "slfi", 0x05, INSTR_RIL_RU },
+	{ "agfi", 0x08, INSTR_RIL_RI },
+	{ "afi", 0x09, INSTR_RIL_RI },
+	{ "algfi", 0x0a, INSTR_RIL_RU },
+	{ "alfi", 0x0b, INSTR_RIL_RU },
+	{ "cgfi", 0x0c, INSTR_RIL_RI },
+	{ "cfi", 0x0d, INSTR_RIL_RI },
+	{ "clgfi", 0x0e, INSTR_RIL_RU },
+	{ "clfi", 0x0f, INSTR_RIL_RU },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_c8[] = {
+#ifdef CONFIG_64BIT
+	{ "mvcos", 0x00, INSTR_SSF_RRDRD },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_e3[] = {
+#ifdef CONFIG_64BIT
+	{ "ltg", 0x02, INSTR_RXY_RRRD },
+	{ "lrag", 0x03, INSTR_RXY_RRRD },
+	{ "lg", 0x04, INSTR_RXY_RRRD },
+	{ "cvby", 0x06, INSTR_RXY_RRRD },
+	{ "ag", 0x08, INSTR_RXY_RRRD },
+	{ "sg", 0x09, INSTR_RXY_RRRD },
+	{ "alg", 0x0a, INSTR_RXY_RRRD },
+	{ "slg", 0x0b, INSTR_RXY_RRRD },
+	{ "msg", 0x0c, INSTR_RXY_RRRD },
+	{ "dsg", 0x0d, INSTR_RXY_RRRD },
+	{ "cvbg", 0x0e, INSTR_RXY_RRRD },
+	{ "lrvg", 0x0f, INSTR_RXY_RRRD },
+	{ "lt", 0x12, INSTR_RXY_RRRD },
+	{ "lray", 0x13, INSTR_RXY_RRRD },
+	{ "lgf", 0x14, INSTR_RXY_RRRD },
+	{ "lgh", 0x15, INSTR_RXY_RRRD },
+	{ "llgf", 0x16, INSTR_RXY_RRRD },
+	{ "llgt", 0x17, INSTR_RXY_RRRD },
+	{ "agf", 0x18, INSTR_RXY_RRRD },
+	{ "sgf", 0x19, INSTR_RXY_RRRD },
+	{ "algf", 0x1a, INSTR_RXY_RRRD },
+	{ "slgf", 0x1b, INSTR_RXY_RRRD },
+	{ "msgf", 0x1c, INSTR_RXY_RRRD },
+	{ "dsgf", 0x1d, INSTR_RXY_RRRD },
+	{ "cg", 0x20, INSTR_RXY_RRRD },
+	{ "clg", 0x21, INSTR_RXY_RRRD },
+	{ "stg", 0x24, INSTR_RXY_RRRD },
+	{ "cvdy", 0x26, INSTR_RXY_RRRD },
+	{ "cvdg", 0x2e, INSTR_RXY_RRRD },
+	{ "strvg", 0x2f, INSTR_RXY_RRRD },
+	{ "cgf", 0x30, INSTR_RXY_RRRD },
+	{ "clgf", 0x31, INSTR_RXY_RRRD },
+	{ "strvh", 0x3f, INSTR_RXY_RRRD },
+	{ "bctg", 0x46, INSTR_RXY_RRRD },
+	{ "sty", 0x50, INSTR_RXY_RRRD },
+	{ "msy", 0x51, INSTR_RXY_RRRD },
+	{ "ny", 0x54, INSTR_RXY_RRRD },
+	{ "cly", 0x55, INSTR_RXY_RRRD },
+	{ "oy", 0x56, INSTR_RXY_RRRD },
+	{ "xy", 0x57, INSTR_RXY_RRRD },
+	{ "ly", 0x58, INSTR_RXY_RRRD },
+	{ "cy", 0x59, INSTR_RXY_RRRD },
+	{ "ay", 0x5a, INSTR_RXY_RRRD },
+	{ "sy", 0x5b, INSTR_RXY_RRRD },
+	{ "aly", 0x5e, INSTR_RXY_RRRD },
+	{ "sly", 0x5f, INSTR_RXY_RRRD },
+	{ "sthy", 0x70, INSTR_RXY_RRRD },
+	{ "lay", 0x71, INSTR_RXY_RRRD },
+	{ "stcy", 0x72, INSTR_RXY_RRRD },
+	{ "icy", 0x73, INSTR_RXY_RRRD },
+	{ "lb", 0x76, INSTR_RXY_RRRD },
+	{ "lgb", 0x77, INSTR_RXY_RRRD },
+	{ "lhy", 0x78, INSTR_RXY_RRRD },
+	{ "chy", 0x79, INSTR_RXY_RRRD },
+	{ "ahy", 0x7a, INSTR_RXY_RRRD },
+	{ "shy", 0x7b, INSTR_RXY_RRRD },
+	{ "ng", 0x80, INSTR_RXY_RRRD },
+	{ "og", 0x81, INSTR_RXY_RRRD },
+	{ "xg", 0x82, INSTR_RXY_RRRD },
+	{ "mlg", 0x86, INSTR_RXY_RRRD },
+	{ "dlg", 0x87, INSTR_RXY_RRRD },
+	{ "alcg", 0x88, INSTR_RXY_RRRD },
+	{ "slbg", 0x89, INSTR_RXY_RRRD },
+	{ "stpq", 0x8e, INSTR_RXY_RRRD },
+	{ "lpq", 0x8f, INSTR_RXY_RRRD },
+	{ "llgc", 0x90, INSTR_RXY_RRRD },
+	{ "llgh", 0x91, INSTR_RXY_RRRD },
+	{ "llc", 0x94, INSTR_RXY_RRRD },
+	{ "llh", 0x95, INSTR_RXY_RRRD },
+#endif
+	{ "lrv", 0x1e, INSTR_RXY_RRRD },
+	{ "lrvh", 0x1f, INSTR_RXY_RRRD },
+	{ "strv", 0x3e, INSTR_RXY_RRRD },
+	{ "ml", 0x96, INSTR_RXY_RRRD },
+	{ "dl", 0x97, INSTR_RXY_RRRD },
+	{ "alc", 0x98, INSTR_RXY_RRRD },
+	{ "slb", 0x99, INSTR_RXY_RRRD },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_e5[] = {
+#ifdef CONFIG_64BIT
+	{ "strag", 0x02, INSTR_SSE_RDRD },
+#endif
+	{ "lasp", 0x00, INSTR_SSE_RDRD },
+	{ "tprot", 0x01, INSTR_SSE_RDRD },
+	{ "mvcsk", 0x0e, INSTR_SSE_RDRD },
+	{ "mvcdk", 0x0f, INSTR_SSE_RDRD },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_eb[] = {
+#ifdef CONFIG_64BIT
+	{ "lmg", 0x04, INSTR_RSY_RRRD },
+	{ "srag", 0x0a, INSTR_RSY_RRRD },
+	{ "slag", 0x0b, INSTR_RSY_RRRD },
+	{ "srlg", 0x0c, INSTR_RSY_RRRD },
+	{ "sllg", 0x0d, INSTR_RSY_RRRD },
+	{ "tracg", 0x0f, INSTR_RSY_RRRD },
+	{ "csy", 0x14, INSTR_RSY_RRRD },
+	{ "rllg", 0x1c, INSTR_RSY_RRRD },
+	{ "clmh", 0x20, INSTR_RSY_RURD },
+	{ "clmy", 0x21, INSTR_RSY_RURD },
+	{ "stmg", 0x24, INSTR_RSY_RRRD },
+	{ "stctg", 0x25, INSTR_RSY_CCRD },
+	{ "stmh", 0x26, INSTR_RSY_RRRD },
+	{ "stcmh", 0x2c, INSTR_RSY_RURD },
+	{ "stcmy", 0x2d, INSTR_RSY_RURD },
+	{ "lctlg", 0x2f, INSTR_RSY_CCRD },
+	{ "csg", 0x30, INSTR_RSY_RRRD },
+	{ "cdsy", 0x31, INSTR_RSY_RRRD },
+	{ "cdsg", 0x3e, INSTR_RSY_RRRD },
+	{ "bxhg", 0x44, INSTR_RSY_RRRD },
+	{ "bxleg", 0x45, INSTR_RSY_RRRD },
+	{ "tmy", 0x51, INSTR_SIY_URD },
+	{ "mviy", 0x52, INSTR_SIY_URD },
+	{ "niy", 0x54, INSTR_SIY_URD },
+	{ "cliy", 0x55, INSTR_SIY_URD },
+	{ "oiy", 0x56, INSTR_SIY_URD },
+	{ "xiy", 0x57, INSTR_SIY_URD },
+	{ "icmh", 0x80, INSTR_RSE_RURD },
+	{ "icmh", 0x80, INSTR_RSY_RURD },
+	{ "icmy", 0x81, INSTR_RSY_RURD },
+	{ "clclu", 0x8f, INSTR_RSY_RRRD },
+	{ "stmy", 0x90, INSTR_RSY_RRRD },
+	{ "lmh", 0x96, INSTR_RSY_RRRD },
+	{ "lmy", 0x98, INSTR_RSY_RRRD },
+	{ "lamy", 0x9a, INSTR_RSY_AARD },
+	{ "stamy", 0x9b, INSTR_RSY_AARD },
+#endif
+	{ "rll", 0x1d, INSTR_RSY_RRRD },
+	{ "mvclu", 0x8e, INSTR_RSY_RRRD },
+	{ "tp", 0xc0, INSTR_RSL_R0RD },
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_ec[] = {
+#ifdef CONFIG_64BIT
+	{ "brxhg", 0x44, INSTR_RIE_RRP },
+	{ "brxlg", 0x45, INSTR_RIE_RRP },
+#endif
+	{ "", 0, INSTR_INVALID }
+};
+
+static struct insn opcode_ed[] = {
+#ifdef CONFIG_64BIT
+	{ "mayl", 0x38, INSTR_RXF_FRRDF },
+	{ "myl", 0x39, INSTR_RXF_FRRDF },
+	{ "may", 0x3a, INSTR_RXF_FRRDF },
+	{ "my", 0x3b, INSTR_RXF_FRRDF },
+	{ "mayh", 0x3c, INSTR_RXF_FRRDF },
+	{ "myh", 0x3d, INSTR_RXF_FRRDF },
+	{ "ley", 0x64, INSTR_RXY_FRRD },
+	{ "ldy", 0x65, INSTR_RXY_FRRD },
+	{ "stey", 0x66, INSTR_RXY_FRRD },
+	{ "stdy", 0x67, INSTR_RXY_FRRD },
+#endif
+	{ "ldeb", 0x04, INSTR_RXE_FRRD },
+	{ "lxdb", 0x05, INSTR_RXE_FRRD },
+	{ "lxeb", 0x06, INSTR_RXE_FRRD },
+	{ "mxdb", 0x07, INSTR_RXE_FRRD },
+	{ "keb", 0x08, INSTR_RXE_FRRD },
+	{ "ceb", 0x09, INSTR_RXE_FRRD },
+	{ "aeb", 0x0a, INSTR_RXE_FRRD },
+	{ "seb", 0x0b, INSTR_RXE_FRRD },
+	{ "mdeb", 0x0c, INSTR_RXE_FRRD },
+	{ "deb", 0x0d, INSTR_RXE_FRRD },
+	{ "maeb", 0x0e, INSTR_RXF_FRRDF },
+	{ "mseb", 0x0f, INSTR_RXF_FRRDF },
+	{ "tceb", 0x10, INSTR_RXE_FRRD },
+	{ "tcdb", 0x11, INSTR_RXE_FRRD },
+	{ "tcxb", 0x12, INSTR_RXE_FRRD },
+	{ "sqeb", 0x14, INSTR_RXE_FRRD },
+	{ "sqdb", 0x15, INSTR_RXE_FRRD },
+	{ "meeb", 0x17, INSTR_RXE_FRRD },
+	{ "kdb", 0x18, INSTR_RXE_FRRD },
+	{ "cdb", 0x19, INSTR_RXE_FRRD },
+	{ "adb", 0x1a, INSTR_RXE_FRRD },
+	{ "sdb", 0x1b, INSTR_RXE_FRRD },
+	{ "mdb", 0x1c, INSTR_RXE_FRRD },
+	{ "ddb", 0x1d, INSTR_RXE_FRRD },
+	{ "madb", 0x1e, INSTR_RXF_FRRDF },
+	{ "msdb", 0x1f, INSTR_RXF_FRRDF },
+	{ "lde", 0x24, INSTR_RXE_FRRD },
+	{ "lxd", 0x25, INSTR_RXE_FRRD },
+	{ "lxe", 0x26, INSTR_RXE_FRRD },
+	{ "mae", 0x2e, INSTR_RXF_FRRDF },
+	{ "mse", 0x2f, INSTR_RXF_FRRDF },
+	{ "sqe", 0x34, INSTR_RXE_FRRD },
+	{ "mee", 0x37, INSTR_RXE_FRRD },
+	{ "mad", 0x3e, INSTR_RXF_FRRDF },
+	{ "msd", 0x3f, INSTR_RXF_FRRDF },
+	{ "", 0, INSTR_INVALID }
+};
+
+/* Extracts an operand value from an instruction.  */
+static unsigned int extract_operand(unsigned char *code,
+				    const struct operand *operand)
+{
+	unsigned int val;
+	int bits;
+
+	/* Extract fragments of the operand byte for byte.  */
+	code += operand->shift / 8;
+	bits = (operand->shift & 7) + operand->bits;
+	val = 0;
+	do {
+		val <<= 8;
+		val |= (unsigned int) *code++;
+		bits -= 8;
+	} while (bits > 0);
+	val >>= -bits;
+	val &= ((1U << (operand->bits - 1)) << 1) - 1;
+
+	/* Check for special long displacement case.  */
+	if (operand->bits == 20 && operand->shift == 20)
+		val = (val & 0xff) << 12 | (val & 0xfff00) >> 8;
+
+	/* Sign extend value if the operand is signed or pc relative.  */
+	if ((operand->flags & (OPERAND_SIGNED | OPERAND_PCREL)) &&
+	    (val & (1U << (operand->bits - 1))))
+		val |= (-1U << (operand->bits - 1)) << 1;
+
+	/* Double value if the operand is pc relative.	*/
+	if (operand->flags & OPERAND_PCREL)
+		val <<= 1;
+
+	/* Length x in an instructions has real length x + 1.  */
+	if (operand->flags & OPERAND_LENGTH)
+		val++;
+	return val;
+}
+
+static inline int insn_length(unsigned char code)
+{
+	return ((((int) code + 64) >> 7) + 1) << 1;
+}
+
+static struct insn *find_insn(unsigned char *code)
+{
+	unsigned char opfrag = code[1];
+	unsigned char opmask;
+	struct insn *table;
+
+	switch (code[0]) {
+	case 0x01:
+		table = opcode_01;
+		break;
+	case 0xa5:
+		table = opcode_a5;
+		break;
+	case 0xa7:
+		table = opcode_a7;
+		break;
+	case 0xb2:
+		table = opcode_b2;
+		break;
+	case 0xb3:
+		table = opcode_b3;
+		break;
+	case 0xb9:
+		table = opcode_b9;
+		break;
+	case 0xc0:
+		table = opcode_c0;
+		break;
+	case 0xc2:
+		table = opcode_c2;
+		break;
+	case 0xc8:
+		table = opcode_c8;
+		break;
+	case 0xe3:
+		table = opcode_e3;
+		opfrag = code[5];
+		break;
+	case 0xe5:
+		table = opcode_e5;
+		break;
+	case 0xeb:
+		table = opcode_eb;
+		opfrag = code[5];
+		break;
+	case 0xec:
+		table = opcode_ec;
+		opfrag = code[5];
+		break;
+	case 0xed:
+		table = opcode_ed;
+		opfrag = code[5];
+		break;
+	default:
+		table = opcode;
+		opfrag = code[0];
+		break;
+	}
+	while (table->format != INSTR_INVALID) {
+		opmask = formats[table->format][0];
+		if (table->opfrag == (opfrag & opmask))
+			return table;
+		table++;
+	}
+	return NULL;
+}
+
+static int print_insn(char *buffer, unsigned char *code, unsigned long addr)
+{
+	struct insn *insn;
+	const unsigned char *ops;
+	const struct operand *operand;
+	unsigned int value;
+	char separator;
+	char *ptr;
+
+	ptr = buffer;
+	insn = find_insn(code);
+	if (insn) {
+		ptr += sprintf(ptr, "%.5s\t", insn->name);
+		/* Extract the operands. */
+		separator = 0;
+		for (ops = formats[insn->format] + 1; *ops != 0; ops++) {
+			operand = operands + *ops;
+			value = extract_operand(code, operand);
+			if ((operand->flags & OPERAND_INDEX)  && value == 0)
+				continue;
+			if ((operand->flags & OPERAND_BASE) &&
+			    value == 0 && separator == '(') {
+				separator = ',';
+				continue;
+			}
+			if (separator)
+				ptr += sprintf(ptr, "%c", separator);
+			if (operand->flags & OPERAND_GPR)
+				ptr += sprintf(ptr, "%%r%i", value);
+			else if (operand->flags & OPERAND_FPR)
+				ptr += sprintf(ptr, "%%f%i", value);
+			else if (operand->flags & OPERAND_AR)
+				ptr += sprintf(ptr, "%%a%i", value);
+			else if (operand->flags & OPERAND_CR)
+				ptr += sprintf(ptr, "%%c%i", value);
+			else if (operand->flags & OPERAND_PCREL)
+				ptr += sprintf(ptr, "%lx", value + addr);
+			else if (operand->flags & OPERAND_SIGNED)
+				ptr += sprintf(ptr, "%i", value);
+			else
+				ptr += sprintf(ptr, "%u", value);
+			if (operand->flags & OPERAND_DISP)
+				separator = '(';
+			else if (operand->flags & OPERAND_BASE) {
+				ptr += sprintf(ptr, ")");
+				separator = ',';
+			} else
+				separator = ',';
+		}
+	} else
+		ptr += sprintf(ptr, "unknown");
+	return (int) (ptr - buffer);
+}
+
+void show_code(struct pt_regs *regs)
+{
+	char *mode = (regs->psw.mask & PSW_MASK_PSTATE) ? "User" : "Krnl";
+	unsigned char code[64];
+	char buffer[64], *ptr;
+	mm_segment_t old_fs;
+	unsigned long addr;
+	int start, end, opsize, hops, i;
+
+	/* Get a snapshot of the 64 bytes surrounding the fault address. */
+	old_fs = get_fs();
+	set_fs((regs->psw.mask & PSW_MASK_PSTATE) ? USER_DS : KERNEL_DS);
+	for (start = 32; start && regs->psw.addr >= 34 - start; start -= 2) {
+		addr = regs->psw.addr - 34 + start;
+		if (__copy_from_user(code + start - 2,
+				     (char __user *) addr, 2))
+			break;
+	}
+	for (end = 32; end < 64; end += 2) {
+		addr = regs->psw.addr + end - 32;
+		if (__copy_from_user(code + end,
+				     (char __user *) addr, 2))
+			break;
+	}
+	set_fs(old_fs);
+	/* Code snapshot useable ? */
+	if ((regs->psw.addr & 1) || start >= end) {
+		printk("%s Code: Bad PSW.\n", mode);
+		return;
+	}
+	/* Find a starting point for the disassembly. */
+	while (start < 32) {
+		hops = 0;
+		for (i = 0, hops = 0; start + i < 32 && hops < 3; hops++) {
+			if (!find_insn(code + start + i))
+				break;
+			i += insn_length(code[start + i]);
+		}
+		if (start + i == 32)
+			/* Looks good, sequence ends at PSW. */
+			break;
+		start += 2;
+	}
+	/* Decode the instructions. */
+	ptr = buffer;
+	ptr += sprintf(ptr, "%s Code:", mode);
+	hops = 0;
+	while (start < end && hops < 8) {
+		*ptr++ = (start == 32) ? '>' : ' ';
+		addr = regs->psw.addr + start - 32;
+		ptr += sprintf(ptr, ONELONG, addr);
+		opsize = insn_length(code[start]);
+		if (start + opsize >= end)
+			break;
+		for (i = 0; i < opsize; i++)
+			ptr += sprintf(ptr, "%02x", code[start + i]);
+		*ptr++ = '\t';
+		if (i < 6)
+			*ptr++ = '\t';
+		ptr += print_insn(ptr, code + start, addr);
+		start += opsize;
+		printk(buffer);
+		ptr = buffer;
+		ptr += sprintf(ptr, "\n          ");
+		hops++;
+	}
+	printk("\n");
+}
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index e518dd53eff5..50538e545618 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/pfn.h>
 #include <linux/uaccess.h>
+#include <asm/ipl.h>
 #include <asm/lowcore.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
@@ -109,7 +110,7 @@ static inline void create_kernel_nss(void) { }
  */
 static noinline __init void clear_bss_section(void)
 {
-	memset(__bss_start, 0, _end - __bss_start);
+	memset(__bss_start, 0, __bss_stop - __bss_start);
 }
 
 /*
@@ -129,7 +130,7 @@ static noinline __init void detect_machine_type(void)
 {
 	struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data;
 
-	asm volatile("stidp %0" : "=m" (S390_lowcore.cpu_data.cpu_id));
+	get_cpu_id(&S390_lowcore.cpu_data.cpu_id);
 
 	/* Running under z/VM ? */
 	if (cpuinfo->cpu_id.version == 0xff)
@@ -140,9 +141,9 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= 4;
 }
 
+#ifdef CONFIG_64BIT
 static noinline __init int memory_fast_detect(void)
 {
-
 	unsigned long val0 = 0;
 	unsigned long val1 = 0xc;
 	int ret = -ENOSYS;
@@ -160,9 +161,15 @@ static noinline __init int memory_fast_detect(void)
 	if (ret || val0 != val1)
 		return -ENOSYS;
 
-	memory_chunk[0].size = val0;
+	memory_chunk[0].size = val0 + 1;
 	return 0;
 }
+#else
+static inline int memory_fast_detect(void)
+{
+	return -ENOSYS;
+}
+#endif
 
 #define ADDR2G	(1UL << 31)
 
@@ -246,11 +253,10 @@ static noinline __init void find_memory_chunks(unsigned long memsize)
 			break;
 #endif
 		/*
-		 * Finish memory detection at the first hole, unless
-		 * - we reached the hsa -> skip it.
-		 * - we know there must be more.
+		 * Finish memory detection at the first hole
+		 * if storage size is unknown.
 		 */
-		if (cc == -1UL && !memsize && old_addr != ADDR2G)
+		if (cc == -1UL && !memsize)
 			break;
 		if (memsize && addr >= memsize)
 			break;
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index dddc3de30401..c8a2212014e0 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -249,8 +249,6 @@ sysc_do_restart:
 	bnz	BASED(sysc_tracesys)
 	basr	%r14,%r8	  # call sys_xxxx
 	st	%r2,SP_R2(%r15)   # store return value (change R2 on stack)
-				  # ATTENTION: check sys_execve_glue before
-				  # changing anything here !!
 
 sysc_return:
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
@@ -381,50 +379,37 @@ ret_from_fork:
 	b	BASED(sysc_return)
 
 #
-# clone, fork, vfork, exec and sigreturn need glue,
-# because they all expect pt_regs as parameter,
-# but are called with different parameter.
-# return-address is set up above
+# kernel_execve function needs to deal with pt_regs that is not
+# at the usual place
 #
-sys_clone_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	l	%r1,BASED(.Lclone)
-	br	%r1			# branch to sys_clone
-
-sys_fork_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	l	%r1,BASED(.Lfork)
-	br	%r1			# branch to sys_fork
-
-sys_vfork_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	l	%r1,BASED(.Lvfork)
-	br	%r1			# branch to sys_vfork
-
-sys_execve_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	l	%r1,BASED(.Lexecve)
-	lr	%r12,%r14		# save return address
-	basr	%r14,%r1		# call sys_execve
-	ltr	%r2,%r2			# check if execve failed
-	bnz	0(%r12)			# it did fail -> store result in gpr2
-	b	4(%r12)			# SKIP ST 2,SP_R2(15) after BASR 14,8
-					# in system_call/sysc_tracesys
-
-sys_sigreturn_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs as parameter
-	l	%r1,BASED(.Lsigreturn)
-	br	%r1			# branch to sys_sigreturn
-
-sys_rt_sigreturn_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs as parameter
-	l	%r1,BASED(.Lrt_sigreturn)
-	br	%r1			# branch to sys_sigreturn
-
-sys_sigaltstack_glue:
-	la	%r4,SP_PTREGS(%r15)	# load pt_regs as parameter
-	l	%r1,BASED(.Lsigaltstack)
-	br	%r1			# branch to sys_sigreturn
+	.globl	kernel_execve
+kernel_execve:
+	stm	%r12,%r15,48(%r15)
+	lr	%r14,%r15
+	l	%r13,__LC_SVC_NEW_PSW+4
+	s	%r15,BASED(.Lc_spsize)
+	st	%r14,__SF_BACKCHAIN(%r15)
+	la	%r12,SP_PTREGS(%r15)
+	xc	0(__PT_SIZE,%r12),0(%r12)
+	l	%r1,BASED(.Ldo_execve)
+	lr	%r5,%r12
+	basr	%r14,%r1
+	ltr	%r2,%r2
+	be	BASED(0f)
+	a	%r15,BASED(.Lc_spsize)
+	lm	%r12,%r15,48(%r15)
+	br	%r14
+	# execve succeeded.
+0:	stnsm	__SF_EMPTY(%r15),0xfc	# disable interrupts
+	l	%r15,__LC_KERNEL_STACK	# load ksp
+	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
+	l	%r9,__LC_THREAD_INFO
+	mvc	SP_PTREGS(__PT_SIZE,%r15),0(%r12)	# copy pt_regs
+	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	l	%r1,BASED(.Lexecve_tail)
+	basr	%r14,%r1
+	b	BASED(sysc_return)
 
 /*
  * Program check handler routine
@@ -1031,19 +1016,11 @@ cleanup_io_leave_insn:
 .Ldo_extint:	.long	do_extint
 .Ldo_signal:	.long	do_signal
 .Lhandle_per:	.long	do_single_step
+.Ldo_execve:	.long	do_execve
+.Lexecve_tail:	.long	execve_tail
 .Ljump_table:	.long	pgm_check_table
 .Lschedule:	.long	schedule
-.Lclone:	.long	sys_clone
-.Lexecve:	.long	sys_execve
-.Lfork: 	.long	sys_fork
-.Lrt_sigreturn: .long	sys_rt_sigreturn
-.Lrt_sigsuspend:
-		.long	sys_rt_sigsuspend
-.Lsigreturn:	.long	sys_sigreturn
-.Lsigsuspend:	.long	sys_sigsuspend
-.Lsigaltstack:	.long	sys_sigaltstack
 .Ltrace:	.long	syscall_trace
-.Lvfork:	.long	sys_vfork
 .Lschedtail:	.long	schedule_tail
 .Lsysc_table:	.long	sys_call_table
 #ifdef CONFIG_TRACE_IRQFLAGS
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 0f758c329a5d..93745fd8f555 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -244,8 +244,6 @@ sysc_noemu:
 	jnz	sysc_tracesys
 	basr	%r14,%r8	# call sys_xxxx
 	stg	%r2,SP_R2(%r15) # store return value (change R2 on stack)
-				# ATTENTION: check sys_execve_glue before
-				# changing anything here !!
 
 sysc_return:
 	tm	SP_PSW+1(%r15),0x01	# returning to user ?
@@ -371,77 +369,35 @@ ret_from_fork:
 	j	sysc_return
 
 #
-# clone, fork, vfork, exec and sigreturn need glue,
-# because they all expect pt_regs as parameter,
-# but are called with different parameter.
-# return-address is set up above
+# kernel_execve function needs to deal with pt_regs that is not
+# at the usual place
 #
-sys_clone_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	jg	sys_clone		# branch to sys_clone
-
-#ifdef CONFIG_COMPAT
-sys32_clone_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	jg	sys32_clone		# branch to sys32_clone
-#endif
-
-sys_fork_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	jg	sys_fork		# branch to sys_fork
-
-sys_vfork_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	jg	sys_vfork		# branch to sys_vfork
-
-sys_execve_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	lgr	%r12,%r14		# save return address
-	brasl	%r14,sys_execve 	# call sys_execve
-	ltgr	%r2,%r2 		# check if execve failed
-	bnz	0(%r12) 		# it did fail -> store result in gpr2
-	b	6(%r12) 		# SKIP STG 2,SP_R2(15) in
-					# system_call/sysc_tracesys
-#ifdef CONFIG_COMPAT
-sys32_execve_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs
-	lgr	%r12,%r14		# save return address
-	brasl	%r14,sys32_execve	# call sys32_execve
-	ltgr	%r2,%r2 		# check if execve failed
-	bnz	0(%r12) 		# it did fail -> store result in gpr2
-	b	6(%r12) 		# SKIP STG 2,SP_R2(15) in
-					# system_call/sysc_tracesys
-#endif
-
-sys_sigreturn_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs as parameter
-	jg	sys_sigreturn		# branch to sys_sigreturn
-
-#ifdef CONFIG_COMPAT
-sys32_sigreturn_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs as parameter
-	jg	sys32_sigreturn 	# branch to sys32_sigreturn
-#endif
-
-sys_rt_sigreturn_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs as parameter
-	jg	sys_rt_sigreturn	# branch to sys_sigreturn
-
-#ifdef CONFIG_COMPAT
-sys32_rt_sigreturn_glue:
-	la	%r2,SP_PTREGS(%r15)	# load pt_regs as parameter
-	jg	sys32_rt_sigreturn	# branch to sys32_sigreturn
-#endif
-
-sys_sigaltstack_glue:
-	la	%r4,SP_PTREGS(%r15)	# load pt_regs as parameter
-	jg	sys_sigaltstack 	# branch to sys_sigreturn
-
-#ifdef CONFIG_COMPAT
-sys32_sigaltstack_glue:
-	la	%r4,SP_PTREGS(%r15)	# load pt_regs as parameter
-	jg	sys32_sigaltstack_wrapper # branch to sys_sigreturn
-#endif
+	.globl	kernel_execve
+kernel_execve:
+	stmg	%r12,%r15,96(%r15)
+	lgr	%r14,%r15
+	aghi	%r15,-SP_SIZE
+	stg	%r14,__SF_BACKCHAIN(%r15)
+	la	%r12,SP_PTREGS(%r15)
+	xc	0(__PT_SIZE,%r12),0(%r12)
+	lgr	%r5,%r12
+	brasl	%r14,do_execve
+	ltgfr	%r2,%r2
+	je	0f
+	aghi	%r15,SP_SIZE
+	lmg	%r12,%r15,96(%r15)
+	br	%r14
+	# execve succeeded.
+0:	stnsm	__SF_EMPTY(%r15),0xfc	# disable interrupts
+	lg	%r15,__LC_KERNEL_STACK	# load ksp
+	aghi	%r15,-SP_SIZE		# make room for registers & psw
+	lg	%r13,__LC_SVC_NEW_PSW+8
+	lg	%r9,__LC_THREAD_INFO
+	mvc	SP_PTREGS(__PT_SIZE,%r15),0(%r12)	# copy pt_regs
+	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
+	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
+	brasl	%r14,execve_tail
+	j	sysc_return
 
 /*
  * Program check handler routine
diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index 453fd3b4edea..dc364c1419af 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -121,7 +121,7 @@ startup_continue:
 	.long	.Lduct			# cr2: dispatchable unit control table
 	.long	0			# cr3: instruction authorization
 	.long	0			# cr4: instruction authorization
-	.long	0xffffffff		# cr5: primary-aste origin
+	.long	.Lduct			# cr5: primary-aste origin
 	.long	0			# cr6:	I/O interrupts
 	.long	0			# cr7:	secondary space segment table
 	.long	0			# cr8:	access registers translation
@@ -132,8 +132,6 @@ startup_continue:
 	.long	0			# cr13: home space segment table
 	.long	0xc0000000		# cr14: machine check handling off
 	.long	0			# cr15: linkage stack operations
-.Lduct:	.long	0,0,0,0,0,0,0,0
-	.long	0,0,0,0,0,0,0,0
 .Lpcfpu:.long	0x00080000,0x80000000 + .Lchkfpu
 .Lpccsp:.long	0x00080000,0x80000000 + .Lchkcsp
 .Lpcmvpg:.long	0x00080000,0x80000000 + .Lchkmvpg
@@ -147,21 +145,17 @@ startup_continue:
 .Linittu:   .long init_thread_union
 .Lstartup_init:
 	    .long startup_init
-
-	.globl ipl_schib
-ipl_schib:
-	.rept 13
-	.long 0
+	.align	64
+.Lduct:	.long	0,0,0,0,.Lduald,0,0,0
+	.long	0,0,0,0,0,0,0,0
+	.align	128
+.Lduald:.rept	8
+	.long	0x80000000,0,0,0	# invalid access-list entries
 	.endr
 
-	.globl ipl_flags
-ipl_flags:
-	.long 0
-	.globl ipl_devno
-ipl_devno:
-	.word 0
-
 	.org	0x12000
+	.globl	_ehead
+_ehead:
 #ifdef CONFIG_SHARED_KERNEL
 	.org	0x100000
 #endif
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index b8fec4e5c5d4..a87b1976d409 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -39,7 +39,69 @@ startup_continue:
 	basr	%r13,0			# get base
 .LPG1:	sll	%r13,1			# remove high order bit
 	srl	%r13,1
-	lhi	%r1,1			# mode 1 = esame
+
+#ifdef CONFIG_ZFCPDUMP
+
+	# check if we have been ipled using zfcp dump:
+
+	tm	0xb9,0x01		# test if subchannel is enabled
+	jno	.nodump			# subchannel disabled
+	l	%r1,0xb8
+	la	%r5,.Lipl_schib-.LPG1(%r13)
+	stsch	0(%r5)			# get schib of subchannel
+	jne	.nodump			# schib not available
+	tm	5(%r5),0x01		# devno valid?
+	jno	.nodump
+	tm	4(%r5),0x80		# qdio capable device?
+	jno	.nodump
+	l	%r2,20(%r0)		# address of ipl parameter block
+	lhi	%r3,0
+	ic	%r3,0x148(%r2)		# get opt field
+	chi	%r3,0x20		# load with dump?
+	jne	.nodump
+
+	# store all prefix registers in case of load with dump:
+
+	la	%r7,0			# base register for 0 page
+	la	%r8,0			# first cpu
+	l	%r11,.Lpref_arr_ptr-.LPG1(%r13)	# address of prefix array
+	ahi	%r11,4			# skip boot cpu
+	lr	%r12,%r11
+	ahi	%r12,(CONFIG_NR_CPUS*4)	# end of prefix array
+	stap	.Lcurrent_cpu+2-.LPG1(%r13)	# store current cpu addr
+1:
+	cl	%r8,.Lcurrent_cpu-.LPG1(%r13)	# is ipl cpu ?
+	je	4f				# if yes get next cpu
+2:
+	lr	%r9,%r7
+	sigp	%r9,%r8,0x9		# stop & store status of cpu
+	brc	8,3f			# accepted
+	brc	4,4f			# status stored: next cpu
+	brc	2,2b			# busy: 	 try again
+	brc	1,4f			# not op:	 next cpu
+3:
+	mvc	0(4,%r11),264(%r7)	# copy prefix register to prefix array
+	ahi	%r11,4			# next element in prefix array
+	clr	%r11,%r12
+	je	5f			# no more space in prefix array
+4:
+	ahi	%r8,1				# next cpu (r8 += 1)
+	cl	%r8,.Llast_cpu-.LPG1(%r13)	# is last possible cpu ?
+	jl	1b				# jump if not last cpu
+5:
+	lhi	%r1,2			# mode 2 = esame (dump)
+	j	6f
+	.align 4
+.Lipl_schib:
+	.rept 13
+	.long 0
+	.endr
+.nodump:
+	lhi	%r1,1			# mode 1 = esame (normal ipl)
+6:
+#else
+	lhi	%r1,1			# mode 1 = esame (normal ipl)
+#endif /* CONFIG_ZFCPDUMP */
 	mvi	__LC_AR_MODE_ID,1	# set esame flag
 	slr	%r0,%r0 		# set cpuid to zero
 	sigp	%r1,%r0,0x12		# switch to esame mode
@@ -134,7 +196,7 @@ startup_continue:
 	.quad	.Lduct			# cr2: dispatchable unit control table
 	.quad	0			# cr3: instruction authorization
 	.quad	0			# cr4: instruction authorization
-	.quad	0xffffffffffffffff	# cr5: primary-aste origin
+	.quad	.Lduct			# cr5: primary-aste origin
 	.quad	0			# cr6:	I/O interrupts
 	.quad	0			# cr7:	secondary space segment table
 	.quad	0			# cr8:	access registers translation
@@ -145,30 +207,31 @@ startup_continue:
 	.quad	0			# cr13: home space segment table
 	.quad	0xc0000000		# cr14: machine check handling off
 	.quad	0			# cr15: linkage stack operations
-.Lduct: .long	0,0,0,0,0,0,0,0
-	.long	0,0,0,0,0,0,0,0
 .Lpcmsk:.quad	0x0000000180000000
 .L4malign:.quad 0xffffffffffc00000
 .Lscan2g:.quad	0x80000000 + 0x20000 - 8	# 2GB + 128K - 8
 .Lnop:	.long	0x07000700
+#ifdef CONFIG_ZFCPDUMP
+.Lcurrent_cpu:
+	.long 0x0
+.Llast_cpu:
+	.long 0x0000ffff
+.Lpref_arr_ptr:
+	.long zfcpdump_prefix_array
+#endif /* CONFIG_ZFCPDUMP */
 .Lparmaddr:
 	.quad	PARMAREA
-
-	.globl	ipl_schib
-ipl_schib:
-	.rept 13
-	.long 0
+	.align	64
+.Lduct: .long	0,0,0,0,.Lduald,0,0,0
+	.long	0,0,0,0,0,0,0,0
+	.align	128
+.Lduald:.rept	8
+	.long	0x80000000,0,0,0	# invalid access-list entries
 	.endr
 
-	.globl	ipl_flags
-ipl_flags:
-	.long	0
-	.globl	ipl_devno
-ipl_devno:
-	.word 0
-
 	.org	0x12000
-
+	.globl	_ehead
+_ehead:
 #ifdef CONFIG_SHARED_KERNEL
 	.org	0x100000
 #endif
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 052259530651..06833ac2b115 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/ctype.h>
+#include <asm/ipl.h>
 #include <asm/smp.h>
 #include <asm/setup.h>
 #include <asm/cpcmd.h>
@@ -28,29 +29,21 @@
 #define SCCB_LOADPARM (&s390_readinfo_sccb.loadparm)
 #define SCCB_FLAG (s390_readinfo_sccb.flags)
 
-enum ipl_type {
-	IPL_TYPE_NONE	 = 1,
-	IPL_TYPE_UNKNOWN = 2,
-	IPL_TYPE_CCW	 = 4,
-	IPL_TYPE_FCP	 = 8,
-	IPL_TYPE_NSS	 = 16,
-};
-
-#define IPL_NONE_STR	 "none"
-#define IPL_UNKNOWN_STR  "unknown"
-#define IPL_CCW_STR	 "ccw"
-#define IPL_FCP_STR	 "fcp"
-#define IPL_NSS_STR	 "nss"
+#define IPL_UNKNOWN_STR		"unknown"
+#define IPL_CCW_STR		"ccw"
+#define IPL_FCP_STR		"fcp"
+#define IPL_FCP_DUMP_STR	"fcp_dump"
+#define IPL_NSS_STR		"nss"
 
 static char *ipl_type_str(enum ipl_type type)
 {
 	switch (type) {
-	case IPL_TYPE_NONE:
-		return IPL_NONE_STR;
 	case IPL_TYPE_CCW:
 		return IPL_CCW_STR;
 	case IPL_TYPE_FCP:
 		return IPL_FCP_STR;
+	case IPL_TYPE_FCP_DUMP:
+		return IPL_FCP_DUMP_STR;
 	case IPL_TYPE_NSS:
 		return IPL_NSS_STR;
 	case IPL_TYPE_UNKNOWN:
@@ -59,15 +52,55 @@ static char *ipl_type_str(enum ipl_type type)
 	}
 }
 
+enum dump_type {
+	DUMP_TYPE_NONE	= 1,
+	DUMP_TYPE_CCW	= 2,
+	DUMP_TYPE_FCP	= 4,
+};
+
+#define DUMP_NONE_STR	 "none"
+#define DUMP_CCW_STR	 "ccw"
+#define DUMP_FCP_STR	 "fcp"
+
+static char *dump_type_str(enum dump_type type)
+{
+	switch (type) {
+	case DUMP_TYPE_NONE:
+		return DUMP_NONE_STR;
+	case DUMP_TYPE_CCW:
+		return DUMP_CCW_STR;
+	case DUMP_TYPE_FCP:
+		return DUMP_FCP_STR;
+	default:
+		return NULL;
+	}
+}
+
+/*
+ * Must be in data section since the bss section
+ * is not cleared when these are accessed.
+ */
+static u16 ipl_devno __attribute__((__section__(".data"))) = 0;
+u32 ipl_flags __attribute__((__section__(".data"))) = 0;
+
 enum ipl_method {
-	IPL_METHOD_NONE,
-	IPL_METHOD_CCW_CIO,
-	IPL_METHOD_CCW_DIAG,
-	IPL_METHOD_CCW_VM,
-	IPL_METHOD_FCP_RO_DIAG,
-	IPL_METHOD_FCP_RW_DIAG,
-	IPL_METHOD_FCP_RO_VM,
-	IPL_METHOD_NSS,
+	REIPL_METHOD_CCW_CIO,
+	REIPL_METHOD_CCW_DIAG,
+	REIPL_METHOD_CCW_VM,
+	REIPL_METHOD_FCP_RO_DIAG,
+	REIPL_METHOD_FCP_RW_DIAG,
+	REIPL_METHOD_FCP_RO_VM,
+	REIPL_METHOD_FCP_DUMP,
+	REIPL_METHOD_NSS,
+	REIPL_METHOD_DEFAULT,
+};
+
+enum dump_method {
+	DUMP_METHOD_NONE,
+	DUMP_METHOD_CCW_CIO,
+	DUMP_METHOD_CCW_DIAG,
+	DUMP_METHOD_CCW_VM,
+	DUMP_METHOD_FCP_DIAG,
 };
 
 enum shutdown_action {
@@ -90,51 +123,30 @@ static char *shutdown_action_str(enum shutdown_action action)
 	case SHUTDOWN_STOP:
 		return SHUTDOWN_STOP_STR;
 	default:
-		BUG();
+		return NULL;
 	}
 }
 
-enum diag308_subcode  {
-	DIAG308_IPL   = 3,
-	DIAG308_DUMP  = 4,
-	DIAG308_SET   = 5,
-	DIAG308_STORE = 6,
-};
-
-enum diag308_ipl_type {
-	DIAG308_IPL_TYPE_FCP = 0,
-	DIAG308_IPL_TYPE_CCW = 2,
-};
-
-enum diag308_opt {
-	DIAG308_IPL_OPT_IPL  = 0x10,
-	DIAG308_IPL_OPT_DUMP = 0x20,
-};
-
-enum diag308_rc {
-	DIAG308_RC_OK = 1,
-};
-
 static int diag308_set_works = 0;
 
 static int reipl_capabilities = IPL_TYPE_UNKNOWN;
 
 static enum ipl_type reipl_type = IPL_TYPE_UNKNOWN;
-static enum ipl_method reipl_method = IPL_METHOD_NONE;
+static enum ipl_method reipl_method = REIPL_METHOD_DEFAULT;
 static struct ipl_parameter_block *reipl_block_fcp;
 static struct ipl_parameter_block *reipl_block_ccw;
 
 static char reipl_nss_name[NSS_NAME_SIZE + 1];
 
-static int dump_capabilities = IPL_TYPE_NONE;
-static enum ipl_type dump_type = IPL_TYPE_NONE;
-static enum ipl_method dump_method = IPL_METHOD_NONE;
+static int dump_capabilities = DUMP_TYPE_NONE;
+static enum dump_type dump_type = DUMP_TYPE_NONE;
+static enum dump_method dump_method = DUMP_METHOD_NONE;
 static struct ipl_parameter_block *dump_block_fcp;
 static struct ipl_parameter_block *dump_block_ccw;
 
 static enum shutdown_action on_panic_action = SHUTDOWN_STOP;
 
-static int diag308(unsigned long subcode, void *addr)
+int diag308(unsigned long subcode, void *addr)
 {
 	register unsigned long _addr asm("0") = (unsigned long) addr;
 	register unsigned long _rc asm("1") = 0;
@@ -147,6 +159,7 @@ static int diag308(unsigned long subcode, void *addr)
 		: "d" (subcode) : "cc", "memory");
 	return _rc;
 }
+EXPORT_SYMBOL_GPL(diag308);
 
 /* SYSFS */
 
@@ -210,7 +223,7 @@ static void make_attrs_ro(struct attribute **attrs)
  * ipl section
  */
 
-static enum ipl_type ipl_get_type(void)
+static __init enum ipl_type get_ipl_type(void)
 {
 	struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
 
@@ -224,12 +237,44 @@ static enum ipl_type ipl_get_type(void)
 		return IPL_TYPE_UNKNOWN;
 	if (ipl->hdr.pbt != DIAG308_IPL_TYPE_FCP)
 		return IPL_TYPE_UNKNOWN;
+	if (ipl->ipl_info.fcp.opt == DIAG308_IPL_OPT_DUMP)
+		return IPL_TYPE_FCP_DUMP;
 	return IPL_TYPE_FCP;
 }
 
+void __init setup_ipl_info(void)
+{
+	ipl_info.type = get_ipl_type();
+	switch (ipl_info.type) {
+	case IPL_TYPE_CCW:
+		ipl_info.data.ccw.dev_id.devno = ipl_devno;
+		ipl_info.data.ccw.dev_id.ssid = 0;
+		break;
+	case IPL_TYPE_FCP:
+	case IPL_TYPE_FCP_DUMP:
+		ipl_info.data.fcp.dev_id.devno =
+			IPL_PARMBLOCK_START->ipl_info.fcp.devno;
+		ipl_info.data.fcp.dev_id.ssid = 0;
+		ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn;
+		ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun;
+		break;
+	case IPL_TYPE_NSS:
+		strncpy(ipl_info.data.nss.name, kernel_nss_name,
+			sizeof(ipl_info.data.nss.name));
+		break;
+	case IPL_TYPE_UNKNOWN:
+	default:
+		/* We have no info to copy */
+		break;
+	}
+}
+
+struct ipl_info ipl_info;
+EXPORT_SYMBOL_GPL(ipl_info);
+
 static ssize_t ipl_type_show(struct subsystem *subsys, char *page)
 {
-	return sprintf(page, "%s\n", ipl_type_str(ipl_get_type()));
+	return sprintf(page, "%s\n", ipl_type_str(ipl_info.type));
 }
 
 static struct subsys_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
@@ -238,10 +283,11 @@ static ssize_t sys_ipl_device_show(struct subsystem *subsys, char *page)
 {
 	struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
 
-	switch (ipl_get_type()) {
+	switch (ipl_info.type) {
 	case IPL_TYPE_CCW:
 		return sprintf(page, "0.0.%04x\n", ipl_devno);
 	case IPL_TYPE_FCP:
+	case IPL_TYPE_FCP_DUMP:
 		return sprintf(page, "0.0.%04x\n", ipl->ipl_info.fcp.devno);
 	default:
 		return 0;
@@ -498,23 +544,29 @@ static int reipl_set_type(enum ipl_type type)
 	switch(type) {
 	case IPL_TYPE_CCW:
 		if (MACHINE_IS_VM)
-			reipl_method = IPL_METHOD_CCW_VM;
+			reipl_method = REIPL_METHOD_CCW_VM;
 		else
-			reipl_method = IPL_METHOD_CCW_CIO;
+			reipl_method = REIPL_METHOD_CCW_CIO;
 		break;
 	case IPL_TYPE_FCP:
 		if (diag308_set_works)
-			reipl_method = IPL_METHOD_FCP_RW_DIAG;
+			reipl_method = REIPL_METHOD_FCP_RW_DIAG;
 		else if (MACHINE_IS_VM)
-			reipl_method = IPL_METHOD_FCP_RO_VM;
+			reipl_method = REIPL_METHOD_FCP_RO_VM;
 		else
-			reipl_method = IPL_METHOD_FCP_RO_DIAG;
+			reipl_method = REIPL_METHOD_FCP_RO_DIAG;
+		break;
+	case IPL_TYPE_FCP_DUMP:
+		reipl_method = REIPL_METHOD_FCP_DUMP;
 		break;
 	case IPL_TYPE_NSS:
-		reipl_method = IPL_METHOD_NSS;
+		reipl_method = REIPL_METHOD_NSS;
+		break;
+	case IPL_TYPE_UNKNOWN:
+		reipl_method = REIPL_METHOD_DEFAULT;
 		break;
 	default:
-		reipl_method = IPL_METHOD_NONE;
+		BUG();
 	}
 	reipl_type = type;
 	return 0;
@@ -592,22 +644,22 @@ static struct attribute_group dump_ccw_attr_group = {
 
 /* dump type */
 
-static int dump_set_type(enum ipl_type type)
+static int dump_set_type(enum dump_type type)
 {
 	if (!(dump_capabilities & type))
 		return -EINVAL;
 	switch(type) {
-	case IPL_TYPE_CCW:
+	case DUMP_TYPE_CCW:
 		if (MACHINE_IS_VM)
-			dump_method = IPL_METHOD_CCW_VM;
+			dump_method = DUMP_METHOD_CCW_VM;
 		else
-			dump_method = IPL_METHOD_CCW_CIO;
+			dump_method = DUMP_METHOD_CCW_CIO;
 		break;
-	case IPL_TYPE_FCP:
-		dump_method = IPL_METHOD_FCP_RW_DIAG;
+	case DUMP_TYPE_FCP:
+		dump_method = DUMP_METHOD_FCP_DIAG;
 		break;
 	default:
-		dump_method = IPL_METHOD_NONE;
+		dump_method = DUMP_METHOD_NONE;
 	}
 	dump_type = type;
 	return 0;
@@ -615,7 +667,7 @@ static int dump_set_type(enum ipl_type type)
 
 static ssize_t dump_type_show(struct subsystem *subsys, char *page)
 {
-	return sprintf(page, "%s\n", ipl_type_str(dump_type));
+	return sprintf(page, "%s\n", dump_type_str(dump_type));
 }
 
 static ssize_t dump_type_store(struct subsystem *subsys, const char *buf,
@@ -623,12 +675,12 @@ static ssize_t dump_type_store(struct subsystem *subsys, const char *buf,
 {
 	int rc = -EINVAL;
 
-	if (strncmp(buf, IPL_NONE_STR, strlen(IPL_NONE_STR)) == 0)
-		rc = dump_set_type(IPL_TYPE_NONE);
-	else if (strncmp(buf, IPL_CCW_STR, strlen(IPL_CCW_STR)) == 0)
-		rc = dump_set_type(IPL_TYPE_CCW);
-	else if (strncmp(buf, IPL_FCP_STR, strlen(IPL_FCP_STR)) == 0)
-		rc = dump_set_type(IPL_TYPE_FCP);
+	if (strncmp(buf, DUMP_NONE_STR, strlen(DUMP_NONE_STR)) == 0)
+		rc = dump_set_type(DUMP_TYPE_NONE);
+	else if (strncmp(buf, DUMP_CCW_STR, strlen(DUMP_CCW_STR)) == 0)
+		rc = dump_set_type(DUMP_TYPE_CCW);
+	else if (strncmp(buf, DUMP_FCP_STR, strlen(DUMP_FCP_STR)) == 0)
+		rc = dump_set_type(DUMP_TYPE_FCP);
 	return (rc != 0) ? rc : len;
 }
 
@@ -677,14 +729,14 @@ void do_reipl(void)
 	char loadparm[LOADPARM_LEN + 1];
 
 	switch (reipl_method) {
-	case IPL_METHOD_CCW_CIO:
+	case REIPL_METHOD_CCW_CIO:
 		devid.devno = reipl_block_ccw->ipl_info.ccw.devno;
-		if (ipl_get_type() == IPL_TYPE_CCW && devid.devno == ipl_devno)
+		if (ipl_info.type == IPL_TYPE_CCW && devid.devno == ipl_devno)
 			diag308(DIAG308_IPL, NULL);
 		devid.ssid  = 0;
 		reipl_ccw_dev(&devid);
 		break;
-	case IPL_METHOD_CCW_VM:
+	case REIPL_METHOD_CCW_VM:
 		reipl_get_ascii_loadparm(loadparm);
 		if (strlen(loadparm) == 0)
 			sprintf(buf, "IPL %X",
@@ -694,30 +746,32 @@ void do_reipl(void)
 				reipl_block_ccw->ipl_info.ccw.devno, loadparm);
 		__cpcmd(buf, NULL, 0, NULL);
 		break;
-	case IPL_METHOD_CCW_DIAG:
+	case REIPL_METHOD_CCW_DIAG:
 		diag308(DIAG308_SET, reipl_block_ccw);
 		diag308(DIAG308_IPL, NULL);
 		break;
-	case IPL_METHOD_FCP_RW_DIAG:
+	case REIPL_METHOD_FCP_RW_DIAG:
 		diag308(DIAG308_SET, reipl_block_fcp);
 		diag308(DIAG308_IPL, NULL);
 		break;
-	case IPL_METHOD_FCP_RO_DIAG:
+	case REIPL_METHOD_FCP_RO_DIAG:
 		diag308(DIAG308_IPL, NULL);
 		break;
-	case IPL_METHOD_FCP_RO_VM:
+	case REIPL_METHOD_FCP_RO_VM:
 		__cpcmd("IPL", NULL, 0, NULL);
 		break;
-	case IPL_METHOD_NSS:
+	case REIPL_METHOD_NSS:
 		sprintf(buf, "IPL %s", reipl_nss_name);
 		__cpcmd(buf, NULL, 0, NULL);
 		break;
-	case IPL_METHOD_NONE:
-	default:
+	case REIPL_METHOD_DEFAULT:
 		if (MACHINE_IS_VM)
 			__cpcmd("IPL", NULL, 0, NULL);
 		diag308(DIAG308_IPL, NULL);
 		break;
+	case REIPL_METHOD_FCP_DUMP:
+	default:
+		break;
 	}
 	signal_processor(smp_processor_id(), sigp_stop_and_store_status);
 }
@@ -728,28 +782,28 @@ static void do_dump(void)
 	static char buf[100];
 
 	switch (dump_method) {
-	case IPL_METHOD_CCW_CIO:
+	case DUMP_METHOD_CCW_CIO:
 		smp_send_stop();
 		devid.devno = dump_block_ccw->ipl_info.ccw.devno;
 		devid.ssid  = 0;
 		reipl_ccw_dev(&devid);
 		break;
-	case IPL_METHOD_CCW_VM:
+	case DUMP_METHOD_CCW_VM:
 		smp_send_stop();
 		sprintf(buf, "STORE STATUS");
 		__cpcmd(buf, NULL, 0, NULL);
 		sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno);
 		__cpcmd(buf, NULL, 0, NULL);
 		break;
-	case IPL_METHOD_CCW_DIAG:
+	case DUMP_METHOD_CCW_DIAG:
 		diag308(DIAG308_SET, dump_block_ccw);
 		diag308(DIAG308_DUMP, NULL);
 		break;
-	case IPL_METHOD_FCP_RW_DIAG:
+	case DUMP_METHOD_FCP_DIAG:
 		diag308(DIAG308_SET, dump_block_fcp);
 		diag308(DIAG308_DUMP, NULL);
 		break;
-	case IPL_METHOD_NONE:
+	case DUMP_METHOD_NONE:
 	default:
 		return;
 	}
@@ -790,12 +844,13 @@ static int __init ipl_init(void)
 	rc = firmware_register(&ipl_subsys);
 	if (rc)
 		return rc;
-	switch (ipl_get_type()) {
+	switch (ipl_info.type) {
 	case IPL_TYPE_CCW:
 		rc = sysfs_create_group(&ipl_subsys.kset.kobj,
 					&ipl_ccw_attr_group);
 		break;
 	case IPL_TYPE_FCP:
+	case IPL_TYPE_FCP_DUMP:
 		rc = ipl_register_fcp_files();
 		break;
 	case IPL_TYPE_NSS:
@@ -852,7 +907,7 @@ static int __init reipl_ccw_init(void)
 	}
 	reipl_block_ccw->hdr.len = IPL_PARM_BLK_CCW_LEN;
 	reipl_block_ccw->hdr.version = IPL_PARM_BLOCK_VERSION;
-	reipl_block_ccw->hdr.blk0_len = sizeof(reipl_block_ccw->ipl_info.ccw);
+	reipl_block_ccw->hdr.blk0_len = IPL_PARM_BLK0_CCW_LEN;
 	reipl_block_ccw->hdr.pbt = DIAG308_IPL_TYPE_CCW;
 	/* check if read scp info worked and set loadparm */
 	if (SCCB_VALID)
@@ -865,7 +920,7 @@ static int __init reipl_ccw_init(void)
 	/* FIXME: check for diag308_set_works when enabling diag ccw reipl */
 	if (!MACHINE_IS_VM)
 		sys_reipl_ccw_loadparm_attr.attr.mode = S_IRUGO;
-	if (ipl_get_type() == IPL_TYPE_CCW)
+	if (ipl_info.type == IPL_TYPE_CCW)
 		reipl_block_ccw->ipl_info.ccw.devno = ipl_devno;
 	reipl_capabilities |= IPL_TYPE_CCW;
 	return 0;
@@ -875,9 +930,9 @@ static int __init reipl_fcp_init(void)
 {
 	int rc;
 
-	if ((!diag308_set_works) && (ipl_get_type() != IPL_TYPE_FCP))
+	if ((!diag308_set_works) && (ipl_info.type != IPL_TYPE_FCP))
 		return 0;
-	if ((!diag308_set_works) && (ipl_get_type() == IPL_TYPE_FCP))
+	if ((!diag308_set_works) && (ipl_info.type == IPL_TYPE_FCP))
 		make_attrs_ro(reipl_fcp_attrs);
 
 	reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
@@ -888,13 +943,12 @@ static int __init reipl_fcp_init(void)
 		free_page((unsigned long)reipl_block_fcp);
 		return rc;
 	}
-	if (ipl_get_type() == IPL_TYPE_FCP) {
+	if (ipl_info.type == IPL_TYPE_FCP) {
 		memcpy(reipl_block_fcp, IPL_PARMBLOCK_START, PAGE_SIZE);
 	} else {
 		reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN;
 		reipl_block_fcp->hdr.version = IPL_PARM_BLOCK_VERSION;
-		reipl_block_fcp->hdr.blk0_len =
-			sizeof(reipl_block_fcp->ipl_info.fcp);
+		reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN;
 		reipl_block_fcp->hdr.pbt = DIAG308_IPL_TYPE_FCP;
 		reipl_block_fcp->ipl_info.fcp.opt = DIAG308_IPL_OPT_IPL;
 	}
@@ -923,7 +977,7 @@ static int __init reipl_init(void)
 	rc = reipl_nss_init();
 	if (rc)
 		return rc;
-	rc = reipl_set_type(ipl_get_type());
+	rc = reipl_set_type(ipl_info.type);
 	if (rc)
 		return rc;
 	return 0;
@@ -943,9 +997,9 @@ static int __init dump_ccw_init(void)
 	}
 	dump_block_ccw->hdr.len = IPL_PARM_BLK_CCW_LEN;
 	dump_block_ccw->hdr.version = IPL_PARM_BLOCK_VERSION;
-	dump_block_ccw->hdr.blk0_len = sizeof(reipl_block_ccw->ipl_info.ccw);
+	dump_block_ccw->hdr.blk0_len = IPL_PARM_BLK0_CCW_LEN;
 	dump_block_ccw->hdr.pbt = DIAG308_IPL_TYPE_CCW;
-	dump_capabilities |= IPL_TYPE_CCW;
+	dump_capabilities |= DUMP_TYPE_CCW;
 	return 0;
 }
 
@@ -967,10 +1021,10 @@ static int __init dump_fcp_init(void)
 	}
 	dump_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN;
 	dump_block_fcp->hdr.version = IPL_PARM_BLOCK_VERSION;
-	dump_block_fcp->hdr.blk0_len = sizeof(dump_block_fcp->ipl_info.fcp);
+	dump_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN;
 	dump_block_fcp->hdr.pbt = DIAG308_IPL_TYPE_FCP;
 	dump_block_fcp->ipl_info.fcp.opt = DIAG308_IPL_OPT_DUMP;
-	dump_capabilities |= IPL_TYPE_FCP;
+	dump_capabilities |= DUMP_TYPE_FCP;
 	return 0;
 }
 
@@ -1009,7 +1063,7 @@ static int __init dump_init(void)
 	rc = dump_fcp_init();
 	if (rc)
 		return rc;
-	dump_set_type(IPL_TYPE_NONE);
+	dump_set_type(DUMP_TYPE_NONE);
 	return 0;
 }
 
@@ -1052,6 +1106,27 @@ static int __init s390_ipl_init(void)
 
 __initcall(s390_ipl_init);
 
+void __init ipl_save_parameters(void)
+{
+	struct cio_iplinfo iplinfo;
+	unsigned int *ipl_ptr;
+	void *src, *dst;
+
+	if (cio_get_iplinfo(&iplinfo))
+		return;
+
+	ipl_devno = iplinfo.devno;
+	ipl_flags |= IPL_DEVNO_VALID;
+	if (!iplinfo.is_qdio)
+		return;
+	ipl_flags |= IPL_PARMBLOCK_VALID;
+	ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR;
+	src = (void *)(unsigned long)*ipl_ptr;
+	dst = (void *)IPL_PARMBLOCK_ORIGIN;
+	memmove(dst, src, PAGE_SIZE);
+	*ipl_ptr = IPL_PARMBLOCK_ORIGIN;
+}
+
 static LIST_HEAD(rcall);
 static DEFINE_MUTEX(rcall_mutex);
 
@@ -1079,7 +1154,7 @@ static void do_reset_calls(void)
 		reset->fn();
 }
 
-extern __u32 dump_prefix_page;
+u32 dump_prefix_page;
 
 void s390_reset_system(void)
 {
@@ -1091,7 +1166,7 @@ void s390_reset_system(void)
 	lc->panic_stack = S390_lowcore.panic_stack;
 
 	/* Save prefix page address for dump case */
-	dump_prefix_page = (unsigned long) lc;
+	dump_prefix_page = (u32)(unsigned long) lc;
 
 	/* Disable prefixing */
 	set_prefix(0);
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index a466bab6677e..993f35381496 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -167,7 +167,7 @@ static int __kprobes swap_instruction(void *aref)
 	 * shall not cross any page boundaries (vmalloc area!) when writing
 	 * the new instruction.
 	 */
-	addr = (u32 *)ALIGN((unsigned long)args->ptr, 4);
+	addr = (u32 *)((unsigned long)args->ptr & -4UL);
 	if ((unsigned long)args->ptr & 2)
 		instr = ((*addr) & 0xffff0000) | args->new;
 	else
@@ -337,21 +337,14 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 	}
 
 	p = get_kprobe(addr);
-	if (!p) {
-		if (*addr != BREAKPOINT_INSTRUCTION) {
-			/*
-			 * The breakpoint instruction was removed right
-			 * after we hit it.  Another cpu has removed
-			 * either a probepoint or a debugger breakpoint
-			 * at this address.  In either case, no further
-			 * handling of this interrupt is appropriate.
-			 *
-			 */
-			ret = 1;
-		}
-		/* Not one of ours: let kernel handle it */
+	if (!p)
+		/*
+		 * No kprobe at this address. The fault has not been
+		 * caused by a kprobe breakpoint. The race of breakpoint
+		 * vs. kprobe remove does not exist because on s390 we
+		 * use stop_machine_run to arm/disarm the breakpoints.
+		 */
 		goto no_kprobe;
-	}
 
 	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 	set_current_kprobe(p, regs, kcb);
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index 52f57af252b4..3c77dd36994c 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -19,6 +19,7 @@
 #include <asm/system.h>
 #include <asm/smp.h>
 #include <asm/reset.h>
+#include <asm/ipl.h>
 
 typedef void (*relocate_kernel_t)(kimage_entry_t *, unsigned long);
 
@@ -29,6 +30,10 @@ int machine_kexec_prepare(struct kimage *image)
 {
 	void *reboot_code_buffer;
 
+	/* Can't replace kernel image since it is read-only. */
+	if (ipl_flags & IPL_NSS_VALID)
+		return -ENOSYS;
+
 	/* We don't support anything but the default image type for now. */
 	if (image->type != KEXEC_TYPE_DEFAULT)
 		return -EINVAL;
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 39d1dd752529..59b4e796680a 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -31,6 +31,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/moduleloader.h>
+#include <linux/bug.h>
 
 #if 0
 #define DEBUGP printk
@@ -398,9 +399,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    struct module *me)
 {
 	vfree(me->arch.syminfo);
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 5acfac654f9d..11d9b0197626 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -280,24 +280,26 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
         return 0;
 }
 
-asmlinkage long sys_fork(struct pt_regs regs)
+asmlinkage long sys_fork(void)
 {
-	return do_fork(SIGCHLD, regs.gprs[15], &regs, 0, NULL, NULL);
+	struct pt_regs *regs = task_pt_regs(current);
+	return do_fork(SIGCHLD, regs->gprs[15], regs, 0, NULL, NULL);
 }
 
-asmlinkage long sys_clone(struct pt_regs regs)
+asmlinkage long sys_clone(void)
 {
-        unsigned long clone_flags;
-        unsigned long newsp;
+	struct pt_regs *regs = task_pt_regs(current);
+	unsigned long clone_flags;
+	unsigned long newsp;
 	int __user *parent_tidptr, *child_tidptr;
 
-        clone_flags = regs.gprs[3];
-        newsp = regs.orig_gpr2;
-	parent_tidptr = (int __user *) regs.gprs[4];
-	child_tidptr = (int __user *) regs.gprs[5];
-        if (!newsp)
-                newsp = regs.gprs[15];
-        return do_fork(clone_flags, newsp, &regs, 0,
+	clone_flags = regs->gprs[3];
+	newsp = regs->orig_gpr2;
+	parent_tidptr = (int __user *) regs->gprs[4];
+	child_tidptr = (int __user *) regs->gprs[5];
+	if (!newsp)
+		newsp = regs->gprs[15];
+	return do_fork(clone_flags, newsp, regs, 0,
 		       parent_tidptr, child_tidptr);
 }
 
@@ -311,40 +313,52 @@ asmlinkage long sys_clone(struct pt_regs regs)
  * do not have enough call-clobbered registers to hold all
  * the information you need.
  */
-asmlinkage long sys_vfork(struct pt_regs regs)
+asmlinkage long sys_vfork(void)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
-		       regs.gprs[15], &regs, 0, NULL, NULL);
+		       regs->gprs[15], regs, 0, NULL, NULL);
+}
+
+asmlinkage void execve_tail(void)
+{
+	task_lock(current);
+	current->ptrace &= ~PT_DTRACE;
+	task_unlock(current);
+	current->thread.fp_regs.fpc = 0;
+	if (MACHINE_HAS_IEEE)
+		asm volatile("sfpc %0,%0" : : "d" (0));
 }
 
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage long sys_execve(struct pt_regs regs)
+asmlinkage long sys_execve(void)
 {
-        int error;
-        char * filename;
-
-        filename = getname((char __user *) regs.orig_gpr2);
-        error = PTR_ERR(filename);
-        if (IS_ERR(filename))
-                goto out;
-        error = do_execve(filename, (char __user * __user *) regs.gprs[3],
-			  (char __user * __user *) regs.gprs[4], &regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-		current->thread.fp_regs.fpc = 0;
-		if (MACHINE_HAS_IEEE)
-			asm volatile("sfpc %0,%0" : : "d" (0));
+	struct pt_regs *regs = task_pt_regs(current);
+	char *filename;
+	unsigned long result;
+	int rc;
+
+	filename = getname((char __user *) regs->orig_gpr2);
+	if (IS_ERR(filename)) {
+		result = PTR_ERR(filename);
+		goto out;
 	}
-        putname(filename);
+	rc = do_execve(filename, (char __user * __user *) regs->gprs[3],
+		       (char __user * __user *) regs->gprs[4], regs);
+	if (rc) {
+		result = rc;
+		goto out_putname;
+	}
+	execve_tail();
+	result = regs->gprs[2];
+out_putname:
+	putname(filename);
 out:
-        return error;
+	return result;
 }
 
-
 /*
  * fill in the FPU structure for a core dump.
  */
diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S
index c3f4d9b95083..2f481cc3d1c9 100644
--- a/arch/s390/kernel/reipl.S
+++ b/arch/s390/kernel/reipl.S
@@ -8,6 +8,10 @@
 
 #include <asm/lowcore.h>
 
+#
+# do_reipl_asm
+# Parameter: r2 = schid of reipl device
+#
 		.globl	do_reipl_asm
 do_reipl_asm:	basr	%r13,0
 .Lpg0:		lpsw	.Lnewpsw-.Lpg0(%r13)
@@ -16,12 +20,12 @@ do_reipl_asm:	basr	%r13,0
 		stm	%r0,%r15,__LC_GPREGS_SAVE_AREA
 		stctl	%c0,%c15,__LC_CREGS_SAVE_AREA
 		stam	%a0,%a15,__LC_AREGS_SAVE_AREA
-		mvc	__LC_PREFIX_SAVE_AREA(4),dump_prefix_page-.Lpg0(%r13)
+		l	%r10,.Ldump_pfx-.Lpg0(%r13)
+		mvc	__LC_PREFIX_SAVE_AREA(4),0(%r10)
 		stckc	.Lclkcmp-.Lpg0(%r13)
 		mvc	__LC_CLOCK_COMP_SAVE_AREA(8),.Lclkcmp-.Lpg0(%r13)
 		stpt	__LC_CPU_TIMER_SAVE_AREA
 		st	%r13, __LC_PSW_SAVE_AREA+4
-
 		lctl	%c6,%c6,.Lall-.Lpg0(%r13)
 		lr	%r1,%r2
 		mvc	__LC_PGM_NEW_PSW(8),.Lpcnew-.Lpg0(%r13)
@@ -55,6 +59,7 @@ do_reipl_asm:	basr	%r13,0
 		.align	8
 .Lclkcmp:	.quad	0x0000000000000000
 .Lall:		.long	0xff000000
+.Ldump_pfx:	.long	dump_prefix_page
 		.align	8
 .Lnewpsw:	.long	0x00080000,0x80000000+.Lpg1
 .Lpcnew:	.long	0x00080000,0x80000000+.Lecs
@@ -79,7 +84,3 @@ do_reipl_asm:	basr	%r13,0
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
-	.globl dump_prefix_page
-dump_prefix_page:
-	.long 0x00000000
-
diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index dbb3eed38865..c41930499a5f 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -8,6 +8,12 @@
  */
 
 #include <asm/lowcore.h>
+
+#
+# do_reipl_asm
+# Parameter: r2 = schid of reipl device
+#
+
 		.globl	do_reipl_asm
 do_reipl_asm:	basr	%r13,0
 .Lpg0:		lpswe	.Lnewpsw-.Lpg0(%r13)
@@ -20,7 +26,8 @@ do_reipl_asm:	basr	%r13,0
 		stg	%r0,__LC_GPREGS_SAVE_AREA-0x1000+8(%r1)
 		stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-0x1000(%r1)
 		stam	%a0,%a15,__LC_AREGS_SAVE_AREA-0x1000(%r1)
-		mvc	__LC_PREFIX_SAVE_AREA-0x1000(4,%r1),dump_prefix_page-.Lpg0(%r13)
+		lg	%r10,.Ldump_pfx-.Lpg0(%r13)
+		mvc	__LC_PREFIX_SAVE_AREA-0x1000(4,%r1),0(%r10)
 		stfpc	__LC_FP_CREG_SAVE_AREA-0x1000(%r1)
 		stckc	.Lclkcmp-.Lpg0(%r13)
 		mvc	__LC_CLOCK_COMP_SAVE_AREA-0x1000(8,%r1),.Lclkcmp-.Lpg0(%r13)
@@ -64,6 +71,7 @@ do_reipl_asm:	basr	%r13,0
 		.align	8
 .Lclkcmp:	.quad	0x0000000000000000
 .Lall:		.quad	0x00000000ff000000
+.Ldump_pfx:	.quad	dump_prefix_page
 .Lregsave:	.quad	0x0000000000000000
 		.align	16
 /*
@@ -103,6 +111,3 @@ do_reipl_asm:	basr	%r13,0
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
 		.long	0x00000000,0x00000000
-	.globl dump_prefix_page
-dump_prefix_page:
-	.long 0x00000000
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 50c5210fbc64..3dfd0985861c 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -41,6 +41,7 @@
 #include <linux/ctype.h>
 #include <linux/reboot.h>
 
+#include <asm/ipl.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/smp.h>
@@ -106,7 +107,7 @@ void __devinit cpu_init (void)
         /*
          * Store processor id in lowcore (used e.g. in timer_interrupt)
          */
-	asm volatile("stidp %0": "=m" (S390_lowcore.cpu_data.cpu_id));
+	get_cpu_id(&S390_lowcore.cpu_data.cpu_id);
         S390_lowcore.cpu_data.cpu_addr = addr;
 
         /*
@@ -284,6 +285,26 @@ static void __init conmode_default(void)
 	}
 }
 
+#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+static void __init setup_zfcpdump(unsigned int console_devno)
+{
+	static char str[64];
+
+	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
+		return;
+	if (console_devno != -1)
+		sprintf(str, "cio_ignore=all,!0.0.%04x,!0.0.%04x",
+			ipl_info.data.fcp.dev_id.devno, console_devno);
+	else
+		sprintf(str, "cio_ignore=all,!0.0.%04x",
+			ipl_info.data.fcp.dev_id.devno);
+	strcat(COMMAND_LINE, str);
+	console_loglevel = 2;
+}
+#else
+static inline void setup_zfcpdump(unsigned int console_devno) {}
+#endif /* CONFIG_ZFCPDUMP */
+
 #ifdef CONFIG_SMP
 void (*_machine_restart)(char *command) = machine_restart_smp;
 void (*_machine_halt)(void) = machine_halt_smp;
@@ -585,13 +606,20 @@ setup_resources(void)
 	}
 }
 
+unsigned long real_memory_size;
+EXPORT_SYMBOL_GPL(real_memory_size);
+
 static void __init setup_memory_end(void)
 {
-	unsigned long real_size, memory_size;
+	unsigned long memory_size;
 	unsigned long max_mem, max_phys;
 	int i;
 
-	memory_size = real_size = 0;
+#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+	if (ipl_info.type == IPL_TYPE_FCP_DUMP)
+		memory_end = ZFCPDUMP_HSA_SIZE;
+#endif
+	memory_size = 0;
 	max_phys = VMALLOC_END_INIT - VMALLOC_MIN_SIZE;
 	memory_end &= PAGE_MASK;
 
@@ -600,7 +628,8 @@ static void __init setup_memory_end(void)
 	for (i = 0; i < MEMORY_CHUNKS; i++) {
 		struct mem_chunk *chunk = &memory_chunk[i];
 
-		real_size = max(real_size, chunk->addr + chunk->size);
+		real_memory_size = max(real_memory_size,
+				       chunk->addr + chunk->size);
 		if (chunk->addr >= max_mem) {
 			memset(chunk, 0, sizeof(*chunk));
 			continue;
@@ -689,9 +718,14 @@ setup_memory(void)
 	psw_set_key(PAGE_DEFAULT_KEY);
 
 	free_bootmem_with_active_regions(0, max_pfn);
-	reserve_bootmem(0, PFN_PHYS(start_pfn));
 
 	/*
+	 * Reserve memory used for lowcore/command line/kernel image.
+	 */
+	reserve_bootmem(0, (unsigned long)_ehead);
+	reserve_bootmem((unsigned long)_stext,
+			PFN_PHYS(start_pfn) - (unsigned long)_stext);
+	/*
 	 * Reserve the bootmem bitmap itself as well. We do this in two
 	 * steps (first step was init_bootmem()) because this catches
 	 * the (very unlikely) case of us accidentally initializing the
@@ -759,6 +793,7 @@ setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	setup_ipl_info();
 	setup_memory_end();
 	setup_addressing_mode();
 	setup_memory();
@@ -776,6 +811,9 @@ setup_arch(char **cmdline_p)
 
         /* Setup default console */
 	conmode_default();
+
+	/* Setup zfcpdump support */
+	setup_zfcpdump(console_devno);
 }
 
 void print_cpu_info(struct cpuinfo_S390 *cpuinfo)
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 554f9cf7499c..3c41907799a1 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -102,9 +102,9 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 }
 
 asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
-					struct pt_regs *regs)
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	return do_sigaltstack(uss, uoss, regs->gprs[15]);
 }
 
@@ -163,8 +163,9 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 	return 0;
 }
 
-asmlinkage long sys_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_sigreturn(void)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	sigframe __user *frame = (sigframe __user *)regs->gprs[15];
 	sigset_t set;
 
@@ -189,8 +190,9 @@ badframe:
 	return 0;
 }
 
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+asmlinkage long sys_rt_sigreturn(void)
 {
+	struct pt_regs *regs = task_pt_regs(current);
 	rt_sigframe __user *frame = (rt_sigframe __user *)regs->gprs[15];
 	sigset_t set;
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 83a4ea6e3d60..3754e2031b39 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -1,12 +1,12 @@
 /*
  *  arch/s390/kernel/smp.c
  *
- *    Copyright (C) IBM Corp. 1999,2006
+ *    Copyright IBM Corp. 1999,2007
  *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ *		 Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *		 Heiko Carstens (heiko.carstens@de.ibm.com)
  *
- *  based on other smp stuff by 
+ *  based on other smp stuff by
  *    (c) 1995 Alan Cox, CymruNET Ltd  <alan@cymru.net>
  *    (c) 1998 Ingo Molnar
  *
@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/cpu.h>
 #include <linux/timex.h>
+#include <linux/bootmem.h>
+#include <asm/ipl.h>
 #include <asm/setup.h>
 #include <asm/sigp.h>
 #include <asm/pgalloc.h>
@@ -39,38 +41,39 @@
 #include <asm/cpcmd.h>
 #include <asm/tlbflush.h>
 #include <asm/timer.h>
-
-extern volatile int __cpu_logical_map[];
+#include <asm/lowcore.h>
 
 /*
  * An array with a pointer the lowcore of every CPU.
  */
-
 struct _lowcore *lowcore_ptr[NR_CPUS];
+EXPORT_SYMBOL(lowcore_ptr);
 
 cpumask_t cpu_online_map = CPU_MASK_NONE;
+EXPORT_SYMBOL(cpu_online_map);
+
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
+EXPORT_SYMBOL(cpu_possible_map);
 
 static struct task_struct *current_set[NR_CPUS];
 
 static void smp_ext_bitcall(int, ec_bit_sig);
-static void smp_ext_bitcall_others(ec_bit_sig);
 
 /*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
+ * Structure and data for __smp_call_function_map(). This is designed to
+ * minimise static memory requirements. It also looks cleaner.
  */
 static DEFINE_SPINLOCK(call_lock);
 
 struct call_data_struct {
 	void (*func) (void *info);
 	void *info;
-	atomic_t started;
-	atomic_t finished;
+	cpumask_t started;
+	cpumask_t finished;
 	int wait;
 };
 
-static struct call_data_struct * call_data;
+static struct call_data_struct *call_data;
 
 /*
  * 'Call function' interrupt callback
@@ -81,127 +84,123 @@ static void do_call_function(void)
 	void *info = call_data->info;
 	int wait = call_data->wait;
 
-	atomic_inc(&call_data->started);
+	cpu_set(smp_processor_id(), call_data->started);
 	(*func)(info);
 	if (wait)
-		atomic_inc(&call_data->finished);
+		cpu_set(smp_processor_id(), call_data->finished);;
 }
 
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
-			int wait)
-/*
- * [SUMMARY] Run a function on all other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler.
- */
+static void __smp_call_function_map(void (*func) (void *info), void *info,
+				    int nonatomic, int wait, cpumask_t map)
 {
 	struct call_data_struct data;
-	int cpus = num_online_cpus()-1;
-
-	if (cpus <= 0)
-		return 0;
+	int cpu, local = 0;
 
-	/* Can deadlock when interrupts are disabled or if in wrong context */
+	/*
+	 * Can deadlock when interrupts are disabled or if in wrong context.
+	 */
 	WARN_ON(irqs_disabled() || in_irq());
 
+	/*
+	 * Check for local function call. We have to have the same call order
+	 * as in on_each_cpu() because of machine_restart_smp().
+	 */
+	if (cpu_isset(smp_processor_id(), map)) {
+		local = 1;
+		cpu_clear(smp_processor_id(), map);
+	}
+
+	cpus_and(map, map, cpu_online_map);
+	if (cpus_empty(map))
+		goto out;
+
 	data.func = func;
 	data.info = info;
-	atomic_set(&data.started, 0);
+	data.started = CPU_MASK_NONE;
 	data.wait = wait;
 	if (wait)
-		atomic_set(&data.finished, 0);
+		data.finished = CPU_MASK_NONE;
 
 	spin_lock_bh(&call_lock);
 	call_data = &data;
-	/* Send a message to all other CPUs and wait for them to respond */
-        smp_ext_bitcall_others(ec_call_function);
+
+	for_each_cpu_mask(cpu, map)
+		smp_ext_bitcall(cpu, ec_call_function);
 
 	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
+	while (!cpus_equal(map, data.started))
 		cpu_relax();
 
 	if (wait)
-		while (atomic_read(&data.finished) != cpus)
+		while (!cpus_equal(map, data.finished))
 			cpu_relax();
+
 	spin_unlock_bh(&call_lock);
 
-	return 0;
+out:
+	local_irq_disable();
+	if (local)
+		func(info);
+	local_irq_enable();
 }
 
 /*
- * Call a function on one CPU
- * cpu : the CPU the function should be executed on
+ * smp_call_function:
+ * @func: the function to run; this must be fast and non-blocking
+ * @info: an arbitrary pointer to pass to the function
+ * @nonatomic: unused
+ * @wait: if true, wait (atomically) until function has completed on other CPUs
  *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler. You may call it from a bottom half.
+ * Run a function on all other CPUs.
  *
- * It is guaranteed that the called function runs on the specified CPU,
- * preemption is disabled.
+ * You must not call this function with disabled interrupts, from a
+ * hardware interrupt handler or from a bottom half.
  */
-int smp_call_function_on(void (*func) (void *info), void *info,
-			 int nonatomic, int wait, int cpu)
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+		      int wait)
 {
-	struct call_data_struct data;
-	int curr_cpu;
-
-	if (!cpu_online(cpu))
-		return -EINVAL;
-
-	/* Can deadlock when interrupts are disabled or if in wrong context */
-	WARN_ON(irqs_disabled() || in_irq());
-
-	/* disable preemption for local function call */
-	curr_cpu = get_cpu();
-
-	if (curr_cpu == cpu) {
-		/* direct call to function */
-		func(info);
-		put_cpu();
-		return 0;
-	}
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock_bh(&call_lock);
-	call_data = &data;
-	smp_ext_bitcall(cpu, ec_call_function);
+	cpumask_t map;
 
-	/* Wait for response */
-	while (atomic_read(&data.started) != 1)
-		cpu_relax();
+	preempt_disable();
+	map = cpu_online_map;
+	cpu_clear(smp_processor_id(), map);
+	__smp_call_function_map(func, info, nonatomic, wait, map);
+	preempt_enable();
+	return 0;
+}
+EXPORT_SYMBOL(smp_call_function);
 
-	if (wait)
-		while (atomic_read(&data.finished) != 1)
-			cpu_relax();
+/*
+ * smp_call_function_on:
+ * @func: the function to run; this must be fast and non-blocking
+ * @info: an arbitrary pointer to pass to the function
+ * @nonatomic: unused
+ * @wait: if true, wait (atomically) until function has completed on other CPUs
+ * @cpu: the CPU where func should run
+ *
+ * Run a function on one processor.
+ *
+ * You must not call this function with disabled interrupts, from a
+ * hardware interrupt handler or from a bottom half.
+ */
+int smp_call_function_on(void (*func) (void *info), void *info, int nonatomic,
+			 int wait, int cpu)
+{
+	cpumask_t map = CPU_MASK_NONE;
 
-	spin_unlock_bh(&call_lock);
-	put_cpu();
+	preempt_disable();
+	cpu_set(cpu, map);
+	__smp_call_function_map(func, info, nonatomic, wait, map);
+	preempt_enable();
 	return 0;
 }
 EXPORT_SYMBOL(smp_call_function_on);
 
 static void do_send_stop(void)
 {
-        int cpu, rc;
+	int cpu, rc;
 
-        /* stop all processors */
+	/* stop all processors */
 	for_each_online_cpu(cpu) {
 		if (cpu == smp_processor_id())
 			continue;
@@ -213,9 +212,9 @@ static void do_send_stop(void)
 
 static void do_store_status(void)
 {
-        int cpu, rc;
+	int cpu, rc;
 
-        /* store status of all processors in their lowcores (real 0) */
+	/* store status of all processors in their lowcores (real 0) */
 	for_each_online_cpu(cpu) {
 		if (cpu == smp_processor_id())
 			continue;
@@ -223,8 +222,8 @@ static void do_store_status(void)
 			rc = signal_processor_p(
 				(__u32)(unsigned long) lowcore_ptr[cpu], cpu,
 				sigp_store_status_at_address);
-		} while(rc == sigp_busy);
-        }
+		} while (rc == sigp_busy);
+	}
 }
 
 static void do_wait_for_stop(void)
@@ -235,7 +234,7 @@ static void do_wait_for_stop(void)
 	for_each_online_cpu(cpu) {
 		if (cpu == smp_processor_id())
 			continue;
-		while(!smp_cpu_not_running(cpu))
+		while (!smp_cpu_not_running(cpu))
 			cpu_relax();
 	}
 }
@@ -249,7 +248,7 @@ void smp_send_stop(void)
 	/* Disable all interrupts/machine checks */
 	__load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
 
-        /* write magic number to zero page (absolute 0) */
+	/* write magic number to zero page (absolute 0) */
 	lowcore_ptr[smp_processor_id()]->panic_magic = __PANIC_MAGIC;
 
 	/* stop other processors. */
@@ -265,8 +264,7 @@ void smp_send_stop(void)
 /*
  * Reboot, halt and power_off routines for SMP.
  */
-
-void machine_restart_smp(char * __unused) 
+void machine_restart_smp(char *__unused)
 {
 	smp_send_stop();
 	do_reipl();
@@ -297,17 +295,17 @@ void machine_power_off_smp(void)
 
 static void do_ext_call_interrupt(__u16 code)
 {
-        unsigned long bits;
+	unsigned long bits;
 
-        /*
-         * handle bit signal external calls
-         *
-         * For the ec_schedule signal we have to do nothing. All the work
-         * is done automatically when we return from the interrupt.
-         */
+	/*
+	 * handle bit signal external calls
+	 *
+	 * For the ec_schedule signal we have to do nothing. All the work
+	 * is done automatically when we return from the interrupt.
+	 */
 	bits = xchg(&S390_lowcore.ext_call_fast, 0);
 
-	if (test_bit(ec_call_function, &bits)) 
+	if (test_bit(ec_call_function, &bits))
 		do_call_function();
 }
 
@@ -317,34 +315,14 @@ static void do_ext_call_interrupt(__u16 code)
  */
 static void smp_ext_bitcall(int cpu, ec_bit_sig sig)
 {
-        /*
-         * Set signaling bit in lowcore of target cpu and kick it
-         */
+	/*
+	 * Set signaling bit in lowcore of target cpu and kick it
+	 */
 	set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast);
-	while(signal_processor(cpu, sigp_emergency_signal) == sigp_busy)
+	while (signal_processor(cpu, sigp_emergency_signal) == sigp_busy)
 		udelay(10);
 }
 
-/*
- * Send an external call sigp to every other cpu in the system and
- * return without waiting for its completion.
- */
-static void smp_ext_bitcall_others(ec_bit_sig sig)
-{
-        int cpu;
-
-	for_each_online_cpu(cpu) {
-		if (cpu == smp_processor_id())
-                        continue;
-                /*
-                 * Set signaling bit in lowcore of target cpu and kick it
-                 */
-		set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast);
-		while (signal_processor(cpu, sigp_emergency_signal) == sigp_busy)
-			udelay(10);
-        }
-}
-
 #ifndef CONFIG_64BIT
 /*
  * this function sends a 'purge tlb' signal to another CPU.
@@ -356,7 +334,7 @@ void smp_ptlb_callback(void *info)
 
 void smp_ptlb_all(void)
 {
-        on_each_cpu(smp_ptlb_callback, NULL, 0, 1);
+	on_each_cpu(smp_ptlb_callback, NULL, 0, 1);
 }
 EXPORT_SYMBOL(smp_ptlb_all);
 #endif /* ! CONFIG_64BIT */
@@ -368,7 +346,7 @@ EXPORT_SYMBOL(smp_ptlb_all);
  */
 void smp_send_reschedule(int cpu)
 {
-        smp_ext_bitcall(cpu, ec_schedule);
+	smp_ext_bitcall(cpu, ec_schedule);
 }
 
 /*
@@ -382,11 +360,12 @@ struct ec_creg_mask_parms {
 /*
  * callback for setting/clearing control bits
  */
-static void smp_ctl_bit_callback(void *info) {
+static void smp_ctl_bit_callback(void *info)
+{
 	struct ec_creg_mask_parms *pp = info;
 	unsigned long cregs[16];
 	int i;
-	
+
 	__ctl_store(cregs, 0, 15);
 	for (i = 0; i <= 15; i++)
 		cregs[i] = (cregs[i] & pp->andvals[i]) | pp->orvals[i];
@@ -405,6 +384,7 @@ void smp_ctl_set_bit(int cr, int bit)
 	parms.orvals[cr] = 1 << bit;
 	on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1);
 }
+EXPORT_SYMBOL(smp_ctl_set_bit);
 
 /*
  * Clear a bit in a control register of all cpus
@@ -418,13 +398,72 @@ void smp_ctl_clear_bit(int cr, int bit)
 	parms.andvals[cr] = ~(1L << bit);
 	on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1);
 }
+EXPORT_SYMBOL(smp_ctl_clear_bit);
+
+#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
+
+/*
+ * zfcpdump_prefix_array holds prefix registers for the following scenario:
+ * 64 bit zfcpdump kernel and 31 bit kernel which is to be dumped. We have to
+ * save its prefix registers, since they get lost, when switching from 31 bit
+ * to 64 bit.
+ */
+unsigned int zfcpdump_prefix_array[NR_CPUS + 1] \
+	__attribute__((__section__(".data")));
+
+static void __init smp_get_save_areas(void)
+{
+	unsigned int cpu, cpu_num, rc;
+	__u16 boot_cpu_addr;
+
+	if (ipl_info.type != IPL_TYPE_FCP_DUMP)
+		return;
+	boot_cpu_addr = S390_lowcore.cpu_data.cpu_addr;
+	cpu_num = 1;
+	for (cpu = 0; cpu <= 65535; cpu++) {
+		if ((u16) cpu == boot_cpu_addr)
+			continue;
+		__cpu_logical_map[1] = (__u16) cpu;
+		if (signal_processor(1, sigp_sense) == sigp_not_operational)
+			continue;
+		if (cpu_num >= NR_CPUS) {
+			printk("WARNING: Registers for cpu %i are not "
+			       "saved, since dump kernel was compiled with"
+			       "NR_CPUS=%i!\n", cpu_num, NR_CPUS);
+			continue;
+		}
+		zfcpdump_save_areas[cpu_num] =
+			alloc_bootmem(sizeof(union save_area));
+		while (1) {
+			rc = signal_processor(1, sigp_stop_and_store_status);
+			if (rc != sigp_busy)
+				break;
+			cpu_relax();
+		}
+		memcpy(zfcpdump_save_areas[cpu_num],
+		       (void *)(unsigned long) store_prefix() +
+		       SAVE_AREA_BASE, SAVE_AREA_SIZE);
+#ifdef __s390x__
+		/* copy original prefix register */
+		zfcpdump_save_areas[cpu_num]->s390x.pref_reg =
+			zfcpdump_prefix_array[cpu_num];
+#endif
+		cpu_num++;
+	}
+}
+
+union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+EXPORT_SYMBOL_GPL(zfcpdump_save_areas);
+
+#else
+#define smp_get_save_areas() do { } while (0)
+#endif
 
 /*
  * Lets check how many CPUs we have.
  */
 
-static unsigned int
-__init smp_count_cpus(void)
+static unsigned int __init smp_count_cpus(void)
 {
 	unsigned int cpu, num_cpus;
 	__u16 boot_cpu_addr;
@@ -440,31 +479,30 @@ __init smp_count_cpus(void)
 		if ((__u16) cpu == boot_cpu_addr)
 			continue;
 		__cpu_logical_map[1] = (__u16) cpu;
-		if (signal_processor(1, sigp_sense) ==
-		    sigp_not_operational)
+		if (signal_processor(1, sigp_sense) == sigp_not_operational)
 			continue;
 		num_cpus++;
 	}
 
-	printk("Detected %d CPU's\n",(int) num_cpus);
+	printk("Detected %d CPU's\n", (int) num_cpus);
 	printk("Boot cpu address %2X\n", boot_cpu_addr);
 
 	return num_cpus;
 }
 
 /*
- *      Activate a secondary processor.
+ *	Activate a secondary processor.
  */
 int __devinit start_secondary(void *cpuvoid)
 {
-        /* Setup the cpu */
-        cpu_init();
+	/* Setup the cpu */
+	cpu_init();
 	preempt_disable();
 	/* Enable TOD clock interrupts on the secondary cpu. */
-        init_cpu_timer();
+	init_cpu_timer();
 #ifdef CONFIG_VIRT_TIMER
 	/* Enable cpu timer interrupts on the secondary cpu. */
-        init_cpu_vtimer();
+	init_cpu_vtimer();
 #endif
 	/* Enable pfault pseudo page faults on this cpu. */
 	pfault_init();
@@ -473,11 +511,11 @@ int __devinit start_secondary(void *cpuvoid)
 	cpu_set(smp_processor_id(), cpu_online_map);
 	/* Switch on interrupts */
 	local_irq_enable();
-        /* Print info about this processor */
-        print_cpu_info(&S390_lowcore.cpu_data);
-        /* cpu_idle will call schedule for us */
-        cpu_idle();
-        return 0;
+	/* Print info about this processor */
+	print_cpu_info(&S390_lowcore.cpu_data);
+	/* cpu_idle will call schedule for us */
+	cpu_idle();
+	return 0;
 }
 
 static void __init smp_create_idle(unsigned int cpu)
@@ -494,56 +532,13 @@ static void __init smp_create_idle(unsigned int cpu)
 	current_set[cpu] = p;
 }
 
-/* Reserving and releasing of CPUs */
-
-static DEFINE_SPINLOCK(smp_reserve_lock);
-static int smp_cpu_reserved[NR_CPUS];
-
-int
-smp_get_cpu(cpumask_t cpu_mask)
-{
-	unsigned long flags;
-	int cpu;
-
-	spin_lock_irqsave(&smp_reserve_lock, flags);
-	/* Try to find an already reserved cpu. */
-	for_each_cpu_mask(cpu, cpu_mask) {
-		if (smp_cpu_reserved[cpu] != 0) {
-			smp_cpu_reserved[cpu]++;
-			/* Found one. */
-			goto out;
-		}
-	}
-	/* Reserve a new cpu from cpu_mask. */
-	for_each_cpu_mask(cpu, cpu_mask) {
-		if (cpu_online(cpu)) {
-			smp_cpu_reserved[cpu]++;
-			goto out;
-		}
-	}
-	cpu = -ENODEV;
-out:
-	spin_unlock_irqrestore(&smp_reserve_lock, flags);
-	return cpu;
-}
-
-void
-smp_put_cpu(int cpu)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&smp_reserve_lock, flags);
-	smp_cpu_reserved[cpu]--;
-	spin_unlock_irqrestore(&smp_reserve_lock, flags);
-}
-
-static int
-cpu_stopped(int cpu)
+static int cpu_stopped(int cpu)
 {
 	__u32 status;
 
 	/* Check for stopped state */
-	if (signal_processor_ps(&status, 0, cpu, sigp_sense) == sigp_status_stored) {
+	if (signal_processor_ps(&status, 0, cpu, sigp_sense) ==
+	    sigp_status_stored) {
 		if (status & 0x40)
 			return 1;
 	}
@@ -552,14 +547,13 @@ cpu_stopped(int cpu)
 
 /* Upping and downing of CPUs */
 
-int
-__cpu_up(unsigned int cpu)
+int __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
-        struct _lowcore    *cpu_lowcore;
+	struct _lowcore *cpu_lowcore;
 	struct stack_frame *sf;
-        sigp_ccode          ccode;
-	int                 curr_cpu;
+	sigp_ccode ccode;
+	int curr_cpu;
 
 	for (curr_cpu = 0; curr_cpu <= 65535; curr_cpu++) {
 		__cpu_logical_map[cpu] = (__u16) curr_cpu;
@@ -572,7 +566,7 @@ __cpu_up(unsigned int cpu)
 
 	ccode = signal_processor_p((__u32)(unsigned long)(lowcore_ptr[cpu]),
 				   cpu, sigp_set_prefix);
-	if (ccode){
+	if (ccode) {
 		printk("sigp_set_prefix failed for cpu %d "
 		       "with condition code %d\n",
 		       (int) cpu, (int) ccode);
@@ -580,9 +574,9 @@ __cpu_up(unsigned int cpu)
 	}
 
 	idle = current_set[cpu];
-        cpu_lowcore = lowcore_ptr[cpu];
+	cpu_lowcore = lowcore_ptr[cpu];
 	cpu_lowcore->kernel_stack = (unsigned long)
-		task_stack_page(idle) + (THREAD_SIZE);
+		task_stack_page(idle) + THREAD_SIZE;
 	sf = (struct stack_frame *) (cpu_lowcore->kernel_stack
 				     - sizeof(struct pt_regs)
 				     - sizeof(struct stack_frame));
@@ -594,11 +588,11 @@ __cpu_up(unsigned int cpu)
 		"	stam	0,15,0(%0)"
 		: : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
 	cpu_lowcore->percpu_offset = __per_cpu_offset[cpu];
-        cpu_lowcore->current_task = (unsigned long) idle;
-        cpu_lowcore->cpu_data.cpu_nr = cpu;
+	cpu_lowcore->current_task = (unsigned long) idle;
+	cpu_lowcore->cpu_data.cpu_nr = cpu;
 	eieio();
 
-	while (signal_processor(cpu,sigp_restart) == sigp_busy)
+	while (signal_processor(cpu, sigp_restart) == sigp_busy)
 		udelay(10);
 
 	while (!cpu_online(cpu))
@@ -613,6 +607,7 @@ void __init smp_setup_cpu_possible_map(void)
 {
 	unsigned int phy_cpus, pos_cpus, cpu;
 
+	smp_get_save_areas();
 	phy_cpus = smp_count_cpus();
 	pos_cpus = min(phy_cpus + additional_cpus, (unsigned int) NR_CPUS);
 
@@ -644,18 +639,11 @@ static int __init setup_possible_cpus(char *s)
 }
 early_param("possible_cpus", setup_possible_cpus);
 
-int
-__cpu_disable(void)
+int __cpu_disable(void)
 {
-	unsigned long flags;
 	struct ec_creg_mask_parms cr_parms;
 	int cpu = smp_processor_id();
 
-	spin_lock_irqsave(&smp_reserve_lock, flags);
-	if (smp_cpu_reserved[cpu] != 0) {
-		spin_unlock_irqrestore(&smp_reserve_lock, flags);
-		return -EBUSY;
-	}
 	cpu_clear(cpu, cpu_online_map);
 
 	/* Disable pfault pseudo page faults on this cpu. */
@@ -666,24 +654,23 @@ __cpu_disable(void)
 
 	/* disable all external interrupts */
 	cr_parms.orvals[0] = 0;
-	cr_parms.andvals[0] = ~(1<<15 | 1<<14 | 1<<13 | 1<<12 |
-				1<<11 | 1<<10 | 1<< 6 | 1<< 4);
+	cr_parms.andvals[0] = ~(1 << 15 | 1 << 14 | 1 << 13 | 1 << 12 |
+				1 << 11 | 1 << 10 | 1 <<  6 | 1 <<  4);
 	/* disable all I/O interrupts */
 	cr_parms.orvals[6] = 0;
-	cr_parms.andvals[6] = ~(1<<31 | 1<<30 | 1<<29 | 1<<28 |
-				1<<27 | 1<<26 | 1<<25 | 1<<24);
+	cr_parms.andvals[6] = ~(1 << 31 | 1 << 30 | 1 << 29 | 1 << 28 |
+				1 << 27 | 1 << 26 | 1 << 25 | 1 << 24);
 	/* disable most machine checks */
 	cr_parms.orvals[14] = 0;
-	cr_parms.andvals[14] = ~(1<<28 | 1<<27 | 1<<26 | 1<<25 | 1<<24);
+	cr_parms.andvals[14] = ~(1 << 28 | 1 << 27 | 1 << 26 |
+				 1 << 25 | 1 << 24);
 
 	smp_ctl_bit_callback(&cr_parms);
 
-	spin_unlock_irqrestore(&smp_reserve_lock, flags);
 	return 0;
 }
 
-void
-__cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	/* Wait until target cpu is down */
 	while (!smp_cpu_not_running(cpu))
@@ -691,13 +678,12 @@ __cpu_die(unsigned int cpu)
 	printk("Processor %d spun down\n", cpu);
 }
 
-void
-cpu_die(void)
+void cpu_die(void)
 {
 	idle_task_exit();
 	signal_processor(smp_processor_id(), sigp_stop);
 	BUG();
-	for(;;);
+	for (;;);
 }
 
 #endif /* CONFIG_HOTPLUG_CPU */
@@ -710,36 +696,36 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned long stack;
 	unsigned int cpu;
-        int i;
-
-        /* request the 0x1201 emergency signal external interrupt */
-        if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
-                panic("Couldn't request external interrupt 0x1201");
-        memset(lowcore_ptr,0,sizeof(lowcore_ptr));  
-        /*
-         *  Initialize prefix pages and stacks for all possible cpus
-         */
+	int i;
+
+	/* request the 0x1201 emergency signal external interrupt */
+	if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
+		panic("Couldn't request external interrupt 0x1201");
+	memset(lowcore_ptr, 0, sizeof(lowcore_ptr));
+	/*
+	 *  Initialize prefix pages and stacks for all possible cpus
+	 */
 	print_cpu_info(&S390_lowcore.cpu_data);
 
-        for_each_possible_cpu(i) {
+	for_each_possible_cpu(i) {
 		lowcore_ptr[i] = (struct _lowcore *)
-			__get_free_pages(GFP_KERNEL|GFP_DMA, 
-					sizeof(void*) == 8 ? 1 : 0);
-		stack = __get_free_pages(GFP_KERNEL,ASYNC_ORDER);
-		if (lowcore_ptr[i] == NULL || stack == 0ULL)
+			__get_free_pages(GFP_KERNEL | GFP_DMA,
+					 sizeof(void*) == 8 ? 1 : 0);
+		stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
+		if (!lowcore_ptr[i] || !stack)
 			panic("smp_boot_cpus failed to allocate memory\n");
 
 		*(lowcore_ptr[i]) = S390_lowcore;
-		lowcore_ptr[i]->async_stack = stack + (ASYNC_SIZE);
-		stack = __get_free_pages(GFP_KERNEL,0);
-		if (stack == 0ULL)
+		lowcore_ptr[i]->async_stack = stack + ASYNC_SIZE;
+		stack = __get_free_pages(GFP_KERNEL, 0);
+		if (!stack)
 			panic("smp_boot_cpus failed to allocate memory\n");
-		lowcore_ptr[i]->panic_stack = stack + (PAGE_SIZE);
+		lowcore_ptr[i]->panic_stack = stack + PAGE_SIZE;
 #ifndef CONFIG_64BIT
 		if (MACHINE_HAS_IEEE) {
 			lowcore_ptr[i]->extended_save_area_addr =
-				(__u32) __get_free_pages(GFP_KERNEL,0);
-			if (lowcore_ptr[i]->extended_save_area_addr == 0)
+				(__u32) __get_free_pages(GFP_KERNEL, 0);
+			if (!lowcore_ptr[i]->extended_save_area_addr)
 				panic("smp_boot_cpus failed to "
 				      "allocate memory\n");
 		}
@@ -778,35 +764,63 @@ void smp_cpus_done(unsigned int max_cpus)
  */
 int setup_profiling_timer(unsigned int multiplier)
 {
-        return 0;
+	return 0;
 }
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static ssize_t show_capability(struct sys_device *dev, char *buf)
+{
+	unsigned int capability;
+	int rc;
+
+	rc = get_cpu_capability(&capability);
+	if (rc)
+		return rc;
+	return sprintf(buf, "%u\n", capability);
+}
+static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
+
+static int __cpuinit smp_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned int)(long)hcpu;
+	struct cpu *c = &per_cpu(cpu_devices, cpu);
+	struct sys_device *s = &c->sysdev;
+
+	switch (action) {
+	case CPU_ONLINE:
+		if (sysdev_create_file(s, &attr_capability))
+			return NOTIFY_BAD;
+		break;
+	case CPU_DEAD:
+		sysdev_remove_file(s, &attr_capability);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata smp_cpu_nb = {
+	.notifier_call = smp_cpu_notify,
+};
+
 static int __init topology_init(void)
 {
 	int cpu;
-	int ret;
+
+	register_cpu_notifier(&smp_cpu_nb);
 
 	for_each_possible_cpu(cpu) {
 		struct cpu *c = &per_cpu(cpu_devices, cpu);
+		struct sys_device *s = &c->sysdev;
 
 		c->hotpluggable = 1;
-		ret = register_cpu(c, cpu);
-		if (ret)
-			printk(KERN_WARNING "topology_init: register_cpu %d "
-			       "failed (%d)\n", cpu, ret);
+		register_cpu(c, cpu);
+		if (!cpu_online(cpu))
+			continue;
+		s = &c->sysdev;
+		sysdev_create_file(s, &attr_capability);
 	}
 	return 0;
 }
-
 subsys_initcall(topology_init);
-
-EXPORT_SYMBOL(cpu_online_map);
-EXPORT_SYMBOL(cpu_possible_map);
-EXPORT_SYMBOL(lowcore_ptr);
-EXPORT_SYMBOL(smp_ctl_set_bit);
-EXPORT_SYMBOL(smp_ctl_clear_bit);
-EXPORT_SYMBOL(smp_call_function);
-EXPORT_SYMBOL(smp_get_cpu);
-EXPORT_SYMBOL(smp_put_cpu);
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index 584ed95f3380..3a77c22cda78 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -266,23 +266,3 @@ s390_fadvise64_64(struct fadvise64_64_args __user *args)
 		return -EFAULT;
 	return sys_fadvise64_64(a.fd, a.offset, a.len, a.advice);
 }
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
-	register const char *__arg1 asm("2") = filename;
-	register char *const*__arg2 asm("3") = argv;
-	register char *const*__arg3 asm("4") = envp;
-	register long __svcres asm("2");
-	asm volatile(
-		"svc %b1"
-		: "=d" (__svcres)
-		: "i" (__NR_execve),
-		  "0" (__arg1),
-		  "d" (__arg2),
-		  "d" (__arg3) : "memory");
-	return __svcres;
-}
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index a52c44455bf0..cd8d321cd0c2 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -10,7 +10,7 @@
 
 NI_SYSCALL							/* 0 */
 SYSCALL(sys_exit,sys_exit,sys32_exit_wrapper)
-SYSCALL(sys_fork_glue,sys_fork_glue,sys_fork_glue)
+SYSCALL(sys_fork,sys_fork,sys_fork)
 SYSCALL(sys_read,sys_read,sys32_read_wrapper)
 SYSCALL(sys_write,sys_write,sys32_write_wrapper)
 SYSCALL(sys_open,sys_open,sys32_open_wrapper)			/* 5 */
@@ -19,7 +19,7 @@ SYSCALL(sys_restart_syscall,sys_restart_syscall,sys_restart_syscall)
 SYSCALL(sys_creat,sys_creat,sys32_creat_wrapper)
 SYSCALL(sys_link,sys_link,sys32_link_wrapper)
 SYSCALL(sys_unlink,sys_unlink,sys32_unlink_wrapper)		/* 10 */
-SYSCALL(sys_execve_glue,sys_execve_glue,sys32_execve_glue)
+SYSCALL(sys_execve,sys_execve,sys32_execve)
 SYSCALL(sys_chdir,sys_chdir,sys32_chdir_wrapper)
 SYSCALL(sys_time,sys_ni_syscall,sys32_time_wrapper)		/* old time syscall */
 SYSCALL(sys_mknod,sys_mknod,sys32_mknod_wrapper)
@@ -127,8 +127,8 @@ SYSCALL(sys_swapoff,sys_swapoff,sys32_swapoff_wrapper)		/* 115 */
 SYSCALL(sys_sysinfo,sys_sysinfo,compat_sys_sysinfo_wrapper)
 SYSCALL(sys_ipc,sys_ipc,sys32_ipc_wrapper)
 SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper)
-SYSCALL(sys_sigreturn_glue,sys_sigreturn_glue,sys32_sigreturn_glue)
-SYSCALL(sys_clone_glue,sys_clone_glue,sys32_clone_glue)		/* 120 */
+SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
+SYSCALL(sys_clone,sys_clone,sys32_clone)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
 SYSCALL(sys_newuname,s390x_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
@@ -181,7 +181,7 @@ SYSCALL(sys_nfsservctl,sys_nfsservctl,compat_sys_nfsservctl_wrapper)
 SYSCALL(sys_setresgid16,sys_ni_syscall,sys32_setresgid16_wrapper)	/* 170 old setresgid16 syscall */
 SYSCALL(sys_getresgid16,sys_ni_syscall,sys32_getresgid16_wrapper)	/* old getresgid16 syscall */
 SYSCALL(sys_prctl,sys_prctl,sys32_prctl_wrapper)
-SYSCALL(sys_rt_sigreturn_glue,sys_rt_sigreturn_glue,sys32_rt_sigreturn_glue)
+SYSCALL(sys_rt_sigreturn,sys_rt_sigreturn,sys32_rt_sigreturn)
 SYSCALL(sys_rt_sigaction,sys_rt_sigaction,sys32_rt_sigaction_wrapper)
 SYSCALL(sys_rt_sigprocmask,sys_rt_sigprocmask,sys32_rt_sigprocmask_wrapper)	/* 175 */
 SYSCALL(sys_rt_sigpending,sys_rt_sigpending,sys32_rt_sigpending_wrapper)
@@ -194,11 +194,11 @@ SYSCALL(sys_chown16,sys_ni_syscall,sys32_chown16_wrapper)	/* old chown16 syscall
 SYSCALL(sys_getcwd,sys_getcwd,sys32_getcwd_wrapper)
 SYSCALL(sys_capget,sys_capget,sys32_capget_wrapper)
 SYSCALL(sys_capset,sys_capset,sys32_capset_wrapper)		/* 185 */
-SYSCALL(sys_sigaltstack_glue,sys_sigaltstack_glue,sys32_sigaltstack_glue)
+SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack)
 SYSCALL(sys_sendfile,sys_sendfile64,sys32_sendfile_wrapper)
 NI_SYSCALL							/* streams1 */
 NI_SYSCALL							/* streams2 */
-SYSCALL(sys_vfork_glue,sys_vfork_glue,sys_vfork_glue)		/* 190 */
+SYSCALL(sys_vfork,sys_vfork,sys_vfork)				/* 190 */
 SYSCALL(sys_getrlimit,sys_getrlimit,compat_sys_getrlimit_wrapper)
 SYSCALL(sys_mmap2,sys_mmap2,sys32_mmap2_wrapper)
 SYSCALL(sys_truncate64,sys_ni_syscall,sys32_truncate64_wrapper)
@@ -320,4 +320,5 @@ SYSCALL(sys_tee,sys_tee,sys_tee_wrapper)
 SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper)
 NI_SYSCALL							/* 310 sys_move_pages */
 SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper)
-SYSCALL(sys_epoll_pwait,sys_epoll_pwait,sys_ni_syscall)
+SYSCALL(sys_epoll_pwait,sys_epoll_pwait,compat_sys_epoll_pwait_wrapper)
+SYSCALL(sys_utimes,sys_utimes,compat_sys_utimes_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index ee9fd7b85928..711dae8da7ad 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -280,7 +280,6 @@ static void clock_comparator_interrupt(__u16 code)
 }
 
 static void etr_reset(void);
-static void etr_init(void);
 static void etr_ext_handler(__u16);
 
 /*
@@ -355,7 +354,6 @@ void __init time_init(void)
 #ifdef CONFIG_VIRT_TIMER
 	vtime_init();
 #endif
-	etr_init();
 }
 
 /*
@@ -426,11 +424,11 @@ static struct etr_aib etr_port1;
 static int etr_port1_uptodate;
 static unsigned long etr_events;
 static struct timer_list etr_timer;
-static struct tasklet_struct etr_tasklet;
 static DEFINE_PER_CPU(atomic_t, etr_sync_word);
 
 static void etr_timeout(unsigned long dummy);
-static void etr_tasklet_fn(unsigned long dummy);
+static void etr_work_fn(struct work_struct *work);
+static DECLARE_WORK(etr_work, etr_work_fn);
 
 /*
  * The etr get_clock function. It will write the current clock value
@@ -507,29 +505,31 @@ static void etr_reset(void)
 	}
 }
 
-static void etr_init(void)
+static int __init etr_init(void)
 {
 	struct etr_aib aib;
 
 	if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
-		return;
+		return 0;
 	/* Check if this machine has the steai instruction. */
 	if (etr_steai(&aib, ETR_STEAI_STEPPING_PORT) == 0)
 		set_bit(ETR_FLAG_STEAI, &etr_flags);
 	setup_timer(&etr_timer, etr_timeout, 0UL);
-	tasklet_init(&etr_tasklet, etr_tasklet_fn, 0);
 	if (!etr_port0_online && !etr_port1_online)
 		set_bit(ETR_FLAG_EACCES, &etr_flags);
 	if (etr_port0_online) {
 		set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
-		tasklet_hi_schedule(&etr_tasklet);
+		schedule_work(&etr_work);
 	}
 	if (etr_port1_online) {
 		set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
-		tasklet_hi_schedule(&etr_tasklet);
+		schedule_work(&etr_work);
 	}
+	return 0;
 }
 
+arch_initcall(etr_init);
+
 /*
  * Two sorts of ETR machine checks. The architecture reads:
  * "When a machine-check niterruption occurs and if a switch-to-local or
@@ -549,7 +549,7 @@ void etr_switch_to_local(void)
 		return;
 	etr_disable_sync_clock(NULL);
 	set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
-	tasklet_hi_schedule(&etr_tasklet);
+	schedule_work(&etr_work);
 }
 
 /*
@@ -564,7 +564,7 @@ void etr_sync_check(void)
 		return;
 	etr_disable_sync_clock(NULL);
 	set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
-	tasklet_hi_schedule(&etr_tasklet);
+	schedule_work(&etr_work);
 }
 
 /*
@@ -591,13 +591,13 @@ static void etr_ext_handler(__u16 code)
 		 * Both ports are not up-to-date now.
 		 */
 		set_bit(ETR_EVENT_PORT_ALERT, &etr_events);
-	tasklet_hi_schedule(&etr_tasklet);
+	schedule_work(&etr_work);
 }
 
 static void etr_timeout(unsigned long dummy)
 {
 	set_bit(ETR_EVENT_UPDATE, &etr_events);
-	tasklet_hi_schedule(&etr_tasklet);
+	schedule_work(&etr_work);
 }
 
 /*
@@ -747,6 +747,7 @@ static void etr_adjust_time(unsigned long long clock, unsigned long long delay)
 	}
 }
 
+#ifdef CONFIG_SMP
 static void etr_sync_cpu_start(void *dummy)
 {
 	int *in_sync = dummy;
@@ -758,8 +759,14 @@ static void etr_sync_cpu_start(void *dummy)
 	 * __udelay will stop the cpu on an enabled wait psw until the
 	 * TOD is running again.
 	 */
-	while (*in_sync == 0)
+	while (*in_sync == 0) {
 		__udelay(1);
+		/*
+		 * A different cpu changes *in_sync. Therefore use
+		 * barrier() to force memory access.
+		 */
+		barrier();
+	}
 	if (*in_sync != 1)
 		/* Didn't work. Clear per-cpu in sync bit again. */
 		etr_disable_sync_clock(NULL);
@@ -773,6 +780,7 @@ static void etr_sync_cpu_start(void *dummy)
 static void etr_sync_cpu_end(void *dummy)
 {
 }
+#endif /* CONFIG_SMP */
 
 /*
  * Sync the TOD clock using the port refered to by aibp. This port
@@ -919,7 +927,7 @@ static struct etr_eacr etr_handle_update(struct etr_aib *aib,
 	if (!eacr.e0 && !eacr.e1)
 		return eacr;
 
-	/* Update port0 or port1 with aib stored in etr_tasklet_fn. */
+	/* Update port0 or port1 with aib stored in etr_work_fn. */
 	if (aib->esw.q == 0) {
 		/* Information for port 0 stored. */
 		if (eacr.p0 && !etr_port0_uptodate) {
@@ -999,7 +1007,7 @@ static void etr_update_eacr(struct etr_eacr eacr)
  * particular this is the only function that calls etr_update_eacr(),
  * it "controls" the etr control register.
  */
-static void etr_tasklet_fn(unsigned long dummy)
+static void etr_work_fn(struct work_struct *work)
 {
 	unsigned long long now;
 	struct etr_eacr eacr;
@@ -1212,13 +1220,13 @@ static ssize_t etr_online_store(struct sys_device *dev,
 			return count;	/* Nothing to do. */
 		etr_port0_online = value;
 		set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
-		tasklet_hi_schedule(&etr_tasklet);
+		schedule_work(&etr_work);
 	} else {
 		if (etr_port1_online == value)
 			return count;	/* Nothing to do. */
 		etr_port1_online = value;
 		set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
-		tasklet_hi_schedule(&etr_tasklet);
+		schedule_work(&etr_work);
 	}
 	return count;
 }
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index f0e5a320e2ec..49dec830373a 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -30,7 +30,7 @@
 #include <linux/kallsyms.h>
 #include <linux/reboot.h>
 #include <linux/kprobes.h>
-
+#include <linux/bug.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -188,18 +188,31 @@ void dump_stack(void)
 
 EXPORT_SYMBOL(dump_stack);
 
+static inline int mask_bits(struct pt_regs *regs, unsigned long bits)
+{
+	return (regs->psw.mask & bits) / ((~bits + 1) & bits);
+}
+
 void show_registers(struct pt_regs *regs)
 {
-	mm_segment_t old_fs;
 	char *mode;
-	int i;
 
 	mode = (regs->psw.mask & PSW_MASK_PSTATE) ? "User" : "Krnl";
 	printk("%s PSW : %p %p",
 	       mode, (void *) regs->psw.mask,
 	       (void *) regs->psw.addr);
 	print_symbol(" (%s)\n", regs->psw.addr & PSW_ADDR_INSN);
-	printk("%s GPRS: " FOURLONG, mode,
+	printk("           R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x "
+	       "P:%x AS:%x CC:%x PM:%x", mask_bits(regs, PSW_MASK_PER),
+	       mask_bits(regs, PSW_MASK_DAT), mask_bits(regs, PSW_MASK_IO),
+	       mask_bits(regs, PSW_MASK_EXT), mask_bits(regs, PSW_MASK_KEY),
+	       mask_bits(regs, PSW_MASK_MCHECK), mask_bits(regs, PSW_MASK_WAIT),
+	       mask_bits(regs, PSW_MASK_PSTATE), mask_bits(regs, PSW_MASK_ASC),
+	       mask_bits(regs, PSW_MASK_CC), mask_bits(regs, PSW_MASK_PM));
+#ifdef CONFIG_64BIT
+	printk(" EA:%x", mask_bits(regs, PSW_BASE_BITS));
+#endif
+	printk("\n%s GPRS: " FOURLONG, mode,
 	       regs->gprs[0], regs->gprs[1], regs->gprs[2], regs->gprs[3]);
 	printk("           " FOURLONG,
 	       regs->gprs[4], regs->gprs[5], regs->gprs[6], regs->gprs[7]);
@@ -208,41 +221,7 @@ void show_registers(struct pt_regs *regs)
 	printk("           " FOURLONG,
 	       regs->gprs[12], regs->gprs[13], regs->gprs[14], regs->gprs[15]);
 
-#if 0
-	/* FIXME: this isn't needed any more but it changes the ksymoops
-	 * input. To remove or not to remove ... */
-	save_access_regs(regs->acrs);
-	printk("%s ACRS: %08x %08x %08x %08x\n", mode,
-	       regs->acrs[0], regs->acrs[1], regs->acrs[2], regs->acrs[3]);
-	printk("           %08x %08x %08x %08x\n",
-	       regs->acrs[4], regs->acrs[5], regs->acrs[6], regs->acrs[7]);
-	printk("           %08x %08x %08x %08x\n",
-	       regs->acrs[8], regs->acrs[9], regs->acrs[10], regs->acrs[11]);
-	printk("           %08x %08x %08x %08x\n",
-	       regs->acrs[12], regs->acrs[13], regs->acrs[14], regs->acrs[15]);
-#endif
-
-	/*
-	 * Print the first 20 byte of the instruction stream at the
-	 * time of the fault.
-	 */
-	old_fs = get_fs();
-	if (regs->psw.mask & PSW_MASK_PSTATE)
-		set_fs(USER_DS);
-	else
-		set_fs(KERNEL_DS);
-	printk("%s Code: ", mode);
-	for (i = 0; i < 20; i++) {
-		unsigned char c;
-		if (__get_user(c, (char __user *)(regs->psw.addr + i))) {
-			printk(" Bad PSW.");
-			break;
-		}
-		printk("%02x ", c);
-	}
-	set_fs(old_fs);
-
-	printk("\n");
+	show_code(regs);
 }	
 
 /* This is called from fs/proc/array.c */
@@ -318,6 +297,11 @@ report_user_fault(long interruption_code, struct pt_regs *regs)
 #endif
 }
 
+int is_valid_bugaddr(unsigned long addr)
+{
+	return 1;
+}
+
 static void __kprobes inline do_trap(long interruption_code, int signr,
 					char *str, struct pt_regs *regs,
 					siginfo_t *info)
@@ -344,8 +328,14 @@ static void __kprobes inline do_trap(long interruption_code, int signr,
                 fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
                 if (fixup)
                         regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
-                else
-                        die(str, regs, interruption_code);
+		else {
+			enum bug_trap_type btt;
+
+			btt = report_bug(regs->psw.addr & PSW_ADDR_INSN);
+			if (btt == BUG_TRAP_TYPE_WARN)
+				return;
+			die(str, regs, interruption_code);
+		}
         }
 }
 
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index c30716ae130c..418f6426a949 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -45,6 +45,8 @@ SECTIONS
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
 
+  BUG_TABLE
+
   .data : {			/* Data */
 	*(.data)
 	CONSTRUCTORS
@@ -77,6 +79,12 @@ SECTIONS
 	*(.init.text)
 	_einittext = .;
   }
+  /*
+   * .exit.text is discarded at runtime, not link time,
+   * to deal with references from __bug_table
+   */
+  .exit.text :	 { *(.exit.text) }
+
   .init.data : { *(.init.data) }
   . = ALIGN(256);
   __setup_start = .;
@@ -116,7 +124,7 @@ SECTIONS
 
   /* Sections to be discarded */
   /DISCARD/ : {
-	*(.exit.text) *(.exit.data) *(.exitcall.exit)
+	*(.exit.data) *(.exitcall.exit)
 	}
 
   /* Stabs debugging sections.  */
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 9d5b02801b46..1e1a6ee2cac1 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -128,7 +128,7 @@ static inline void set_vtimer(__u64 expires)
 	S390_lowcore.last_update_timer = expires;
 
 	/* store expire time for this CPU timer */
-	per_cpu(virt_cpu_timer, smp_processor_id()).to_expire = expires;
+	__get_cpu_var(virt_cpu_timer).to_expire = expires;
 }
 #else
 static inline void set_vtimer(__u64 expires)
@@ -137,7 +137,7 @@ static inline void set_vtimer(__u64 expires)
 	asm volatile ("SPT %0" : : "m" (S390_lowcore.last_update_timer));
 
 	/* store expire time for this CPU timer */
-	per_cpu(virt_cpu_timer, smp_processor_id()).to_expire = expires;
+	__get_cpu_var(virt_cpu_timer).to_expire = expires;
 }
 #endif
 
@@ -145,7 +145,7 @@ static void start_cpu_timer(void)
 {
 	struct vtimer_queue *vt_list;
 
-	vt_list = &per_cpu(virt_cpu_timer, smp_processor_id());
+	vt_list = &__get_cpu_var(virt_cpu_timer);
 
 	/* CPU timer interrupt is pending, don't reprogramm it */
 	if (vt_list->idle & 1LL<<63)
@@ -159,7 +159,7 @@ static void stop_cpu_timer(void)
 {
 	struct vtimer_queue *vt_list;
 
-	vt_list = &per_cpu(virt_cpu_timer, smp_processor_id());
+	vt_list = &__get_cpu_var(virt_cpu_timer);
 
 	/* nothing to do */
 	if (list_empty(&vt_list->list)) {
@@ -219,7 +219,7 @@ static void do_callbacks(struct list_head *cb_list)
 	if (list_empty(cb_list))
 		return;
 
-	vt_list = &per_cpu(virt_cpu_timer, smp_processor_id());
+	vt_list = &__get_cpu_var(virt_cpu_timer);
 
 	list_for_each_entry_safe(event, tmp, cb_list, entry) {
 		fn = event->function;
@@ -244,7 +244,6 @@ static void do_callbacks(struct list_head *cb_list)
  */
 static void do_cpu_timer_interrupt(__u16 error_code)
 {
-	int cpu;
 	__u64 next, delta;
 	struct vtimer_queue *vt_list;
 	struct vtimer_list *event, *tmp;
@@ -253,8 +252,7 @@ static void do_cpu_timer_interrupt(__u16 error_code)
 	struct list_head cb_list;
 
 	INIT_LIST_HEAD(&cb_list);
-	cpu = smp_processor_id();
-	vt_list = &per_cpu(virt_cpu_timer, cpu);
+	vt_list = &__get_cpu_var(virt_cpu_timer);
 
 	/* walk timer list, fire all expired events */
 	spin_lock(&vt_list->lock);
@@ -534,7 +532,7 @@ void init_cpu_vtimer(void)
 	/* enable cpu timer interrupts */
 	__ctl_set_bit(0,10);
 
-	vt_list = &per_cpu(virt_cpu_timer, smp_processor_id());
+	vt_list = &__get_cpu_var(virt_cpu_timer);
 	INIT_LIST_HEAD(&vt_list->list);
 	spin_lock_init(&vt_list->lock);
 	vt_list->to_expire = 0;
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 7a44fed21b35..59aea65ce99f 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -5,6 +5,6 @@
 EXTRA_AFLAGS := -traditional
 
 lib-y += delay.o string.o uaccess_std.o uaccess_pt.o qrnnd.o
-lib-$(CONFIG_32BIT) += div64.o
+obj-$(CONFIG_32BIT) += div64.o
 lib-$(CONFIG_64BIT) += uaccess_mvcos.o
 lib-$(CONFIG_SMP) += spinlock.o
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 02854449b74b..70f2a862b670 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/timex.h>
 #include <linux/irqflags.h>
+#include <linux/interrupt.h>
 
 void __delay(unsigned long loops)
 {
@@ -35,7 +36,11 @@ void __udelay(unsigned long usecs)
 {
 	u64 end, time, jiffy_timer = 0;
 	unsigned long flags, cr0, mask, dummy;
+	int irq_context;
 
+	irq_context = in_interrupt();
+	if (!irq_context)
+		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
 		jiffy_timer = S390_lowcore.jiffy_timer;
@@ -62,6 +67,8 @@ void __udelay(unsigned long usecs)
 		__ctl_load(cr0, 0, 0);
 		S390_lowcore.jiffy_timer = jiffy_timer;
 	}
+	if (!irq_context)
+		_local_bh_enable();
 	set_clock_comparator(S390_lowcore.jiffy_timer);
 	local_irq_restore(flags);
 }
diff --git a/arch/s390/lib/div64.c b/arch/s390/lib/div64.c
index 0481f3424a13..a5f8300bf3ee 100644
--- a/arch/s390/lib/div64.c
+++ b/arch/s390/lib/div64.c
@@ -147,5 +147,3 @@ uint32_t __div64_32(uint64_t *n, uint32_t base)
 }
 
 #endif /* MARCH_G5 */
-
-EXPORT_SYMBOL(__div64_32);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 641aef36ccc4..2b76a879a7b5 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -26,9 +26,9 @@
 #include <linux/module.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
+#include <linux/uaccess.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/kdebug.h>
 #include <asm/s390_ext.h>
@@ -63,21 +63,25 @@ int unregister_page_fault_notifier(struct notifier_block *nb)
 	return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
 }
 
-static inline int notify_page_fault(enum die_val val, const char *str,
-			struct pt_regs *regs, long err, int trap, int sig)
+static int __kprobes __notify_page_fault(struct pt_regs *regs, long err)
 {
-	struct die_args args = {
-		.regs = regs,
-		.str = str,
-		.err = err,
-		.trapnr = trap,
-		.signr = sig
-	};
-	return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
+	struct die_args args = { .str = "page fault",
+				 .trapnr = 14,
+				 .signr = SIGSEGV };
+	args.regs = regs;
+	args.err = err;
+	return atomic_notifier_call_chain(&notify_page_fault_chain,
+					  DIE_PAGE_FAULT, &args);
+}
+
+static inline int notify_page_fault(struct pt_regs *regs, long err)
+{
+	if (unlikely(kprobe_running()))
+		return __notify_page_fault(regs, err);
+	return NOTIFY_DONE;
 }
 #else
-static inline int notify_page_fault(enum die_val val, const char *str,
-			struct pt_regs *regs, long err, int trap, int sig)
+static inline int notify_page_fault(struct pt_regs *regs, long err)
 {
 	return NOTIFY_DONE;
 }
@@ -108,53 +112,40 @@ void bust_spinlocks(int yes)
 }
 
 /*
- * Check which address space is addressed by the access
- * register in S390_lowcore.exc_access_id.
- * Returns 1 for user space and 0 for kernel space.
- */
-static int __check_access_register(struct pt_regs *regs, int error_code)
-{
-	int areg = S390_lowcore.exc_access_id;
-
-	if (areg == 0)
-		/* Access via access register 0 -> kernel address */
-		return 0;
-	save_access_regs(current->thread.acrs);
-	if (regs && areg < NUM_ACRS && current->thread.acrs[areg] <= 1)
-		/*
-		 * access register contains 0 -> kernel address,
-		 * access register contains 1 -> user space address
-		 */
-		return current->thread.acrs[areg];
-
-	/* Something unhealthy was done with the access registers... */
-	die("page fault via unknown access register", regs, error_code);
-	do_exit(SIGKILL);
-	return 0;
-}
-
-/*
- * Check which address space the address belongs to.
- * May return 1 or 2 for user space and 0 for kernel space.
- * Returns 2 for user space in primary addressing mode with
- * CONFIG_S390_EXEC_PROTECT on and kernel parameter noexec=on.
+ * Returns the address space associated with the fault.
+ * Returns 0 for kernel space, 1 for user space and
+ * 2 for code execution in user space with noexec=on.
  */
-static inline int check_user_space(struct pt_regs *regs, int error_code)
+static inline int check_space(struct task_struct *tsk)
 {
 	/*
-	 * The lowest two bits of S390_lowcore.trans_exc_code indicate
-	 * which paging table was used:
-	 *   0: Primary Segment Table Descriptor
-	 *   1: STD determined via access register
-	 *   2: Secondary Segment Table Descriptor
-	 *   3: Home Segment Table Descriptor
+	 * The lowest two bits of S390_lowcore.trans_exc_code
+	 * indicate which paging table was used.
 	 */
-	int descriptor = S390_lowcore.trans_exc_code & 3;
-	if (unlikely(descriptor == 1))
-		return __check_access_register(regs, error_code);
-	if (descriptor == 2)
-		return current->thread.mm_segment.ar4;
-	return ((descriptor != 0) ^ (switch_amode)) << s390_noexec;
+	int desc = S390_lowcore.trans_exc_code & 3;
+
+	if (desc == 3)	/* Home Segment Table Descriptor */
+		return switch_amode == 0;
+	if (desc == 2)	/* Secondary Segment Table Descriptor */
+		return tsk->thread.mm_segment.ar4;
+#ifdef CONFIG_S390_SWITCH_AMODE
+	if (unlikely(desc == 1)) { /* STD determined via access register */
+		/* %a0 always indicates primary space. */
+		if (S390_lowcore.exc_access_id != 0) {
+			save_access_regs(tsk->thread.acrs);
+			/*
+			 * An alet of 0 indicates primary space.
+			 * An alet of 1 indicates secondary space.
+			 * Any other alet values generate an
+			 * alen-translation exception.
+			 */
+			if (tsk->thread.acrs[S390_lowcore.exc_access_id])
+				return tsk->thread.mm_segment.ar4;
+		}
+	}
+#endif
+	/* Primary Segment Table Descriptor */
+	return switch_amode << s390_noexec;
 }
 
 /*
@@ -183,74 +174,127 @@ static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
 	force_sig_info(SIGSEGV, &si, current);
 }
 
+static void do_no_context(struct pt_regs *regs, unsigned long error_code,
+			  unsigned long address)
+{
+	const struct exception_table_entry *fixup;
+
+	/* Are we prepared to handle this kernel fault?  */
+	fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK);
+	if (fixup) {
+		regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
+		return;
+	}
+
+	/*
+	 * Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+	if (check_space(current) == 0)
+		printk(KERN_ALERT "Unable to handle kernel pointer dereference"
+		       " at virtual kernel address %p\n", (void *)address);
+	else
+		printk(KERN_ALERT "Unable to handle kernel paging request"
+		       " at virtual user address %p\n", (void *)address);
+
+	die("Oops", regs, error_code);
+	do_exit(SIGKILL);
+}
+
+static void do_low_address(struct pt_regs *regs, unsigned long error_code)
+{
+	/* Low-address protection hit in kernel mode means
+	   NULL pointer write access in kernel mode.  */
+	if (regs->psw.mask & PSW_MASK_PSTATE) {
+		/* Low-address protection hit in user mode 'cannot happen'. */
+		die ("Low-address protection", regs, error_code);
+		do_exit(SIGKILL);
+	}
+
+	do_no_context(regs, error_code, 0);
+}
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+static int do_out_of_memory(struct pt_regs *regs, unsigned long error_code,
+			    unsigned long address)
+{
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+
+	up_read(&mm->mmap_sem);
+	if (is_init(tsk)) {
+		yield();
+		down_read(&mm->mmap_sem);
+		return 1;
+	}
+	printk("VM: killing process %s\n", tsk->comm);
+	if (regs->psw.mask & PSW_MASK_PSTATE)
+		do_exit(SIGKILL);
+	do_no_context(regs, error_code, address);
+	return 0;
+}
+
+static void do_sigbus(struct pt_regs *regs, unsigned long error_code,
+		      unsigned long address)
+{
+	struct task_struct *tsk = current;
+	struct mm_struct *mm = tsk->mm;
+
+	up_read(&mm->mmap_sem);
+	/*
+	 * Send a sigbus, regardless of whether we were in kernel
+	 * or user mode.
+	 */
+	tsk->thread.prot_addr = address;
+	tsk->thread.trap_no = error_code;
+	force_sig(SIGBUS, tsk);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!(regs->psw.mask & PSW_MASK_PSTATE))
+		do_no_context(regs, error_code, address);
+}
+
 #ifdef CONFIG_S390_EXEC_PROTECT
 extern long sys_sigreturn(struct pt_regs *regs);
 extern long sys_rt_sigreturn(struct pt_regs *regs);
 extern long sys32_sigreturn(struct pt_regs *regs);
 extern long sys32_rt_sigreturn(struct pt_regs *regs);
 
-static inline void do_sigreturn(struct mm_struct *mm, struct pt_regs *regs,
-				int rt)
+static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
+			 unsigned long address, unsigned long error_code)
 {
+	u16 instruction;
+	int rc, compat;
+
+	pagefault_disable();
+	rc = __get_user(instruction, (u16 __user *) regs->psw.addr);
+	pagefault_enable();
+	if (rc)
+		return -EFAULT;
+
 	up_read(&mm->mmap_sem);
 	clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
 #ifdef CONFIG_COMPAT
-	if (test_tsk_thread_flag(current, TIF_31BIT)) {
-		if (rt)
-			sys32_rt_sigreturn(regs);
-		else
-			sys32_sigreturn(regs);
-		return;
-	}
-#endif /* CONFIG_COMPAT */
-	if (rt)
-		sys_rt_sigreturn(regs);
+	compat = test_tsk_thread_flag(current, TIF_31BIT);
+	if (compat && instruction == 0x0a77)
+		sys32_sigreturn(regs);
+	else if (compat && instruction == 0x0aad)
+		sys32_rt_sigreturn(regs);
 	else
+#endif
+	if (instruction == 0x0a77)
 		sys_sigreturn(regs);
-	return;
-}
-
-static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
-			 unsigned long address, unsigned long error_code)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	u16 *instruction;
-	unsigned long pfn, uaddr = regs->psw.addr;
-
-	spin_lock(&mm->page_table_lock);
-	pgd = pgd_offset(mm, uaddr);
-	if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
-		goto out_fault;
-	pmd = pmd_offset(pgd, uaddr);
-	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
-		goto out_fault;
-	pte = pte_offset_map(pmd_offset(pgd_offset(mm, uaddr), uaddr), uaddr);
-	if (!pte || !pte_present(*pte))
-		goto out_fault;
-	pfn = pte_pfn(*pte);
-	if (!pfn_valid(pfn))
-		goto out_fault;
-	spin_unlock(&mm->page_table_lock);
-
-	instruction = (u16 *) ((pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE-1)));
-	if (*instruction == 0x0a77)
-		do_sigreturn(mm, regs, 0);
-	else if (*instruction == 0x0aad)
-		do_sigreturn(mm, regs, 1);
+	else if (instruction == 0x0aad)
+		sys_rt_sigreturn(regs);
 	else {
-		printk("- XXX - do_exception: task = %s, primary, NO EXEC "
-		       "-> SIGSEGV\n", current->comm);
-		up_read(&mm->mmap_sem);
 		current->thread.prot_addr = address;
 		current->thread.trap_no = error_code;
 		do_sigsegv(regs, error_code, SEGV_MAPERR, address);
 	}
 	return 0;
-out_fault:
-	spin_unlock(&mm->page_table_lock);
-	return -EFAULT;
 }
 #endif /* CONFIG_S390_EXEC_PROTECT */
 
@@ -265,59 +309,33 @@ out_fault:
  *   11       Page translation     ->  Not present       (nullification)
  *   3b       Region third trans.  ->  Not present       (nullification)
  */
-static inline void __kprobes
-do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
+static inline void
+do_exception(struct pt_regs *regs, unsigned long error_code, int write)
 {
-        struct task_struct *tsk;
-        struct mm_struct *mm;
-        struct vm_area_struct * vma;
-        unsigned long address;
-	int user_address;
-	const struct exception_table_entry *fixup;
-	int si_code = SEGV_MAPERR;
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct *vma;
+	unsigned long address;
+	int space;
+	int si_code;
 
-        tsk = current;
-        mm = tsk->mm;
-	
-	if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14,
-					SIGSEGV) == NOTIFY_STOP)
+	if (notify_page_fault(regs, error_code) == NOTIFY_STOP)
 		return;
 
-	/* 
-         * Check for low-address protection.  This needs to be treated
-	 * as a special case because the translation exception code 
-	 * field is not guaranteed to contain valid data in this case.
-	 */
-	if (is_protection && !(S390_lowcore.trans_exc_code & 4)) {
-
-		/* Low-address protection hit in kernel mode means 
-		   NULL pointer write access in kernel mode.  */
- 		if (!(regs->psw.mask & PSW_MASK_PSTATE)) {
-			address = 0;
-			user_address = 0;
-			goto no_context;
-		}
+	tsk = current;
+	mm = tsk->mm;
 
-		/* Low-address protection hit in user mode 'cannot happen'.  */
-		die ("Low-address protection", regs, error_code);
-        	do_exit(SIGKILL);
-	}
-
-        /* 
-         * get the failing address 
-         * more specific the segment and page table portion of 
-         * the address 
-         */
-        address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
-	user_address = check_user_space(regs, error_code);
+	/* get the failing address and the affected space */
+	address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
+	space = check_space(tsk);
 
 	/*
 	 * Verify that the fault happened in user space, that
 	 * we are not in an interrupt and that there is a 
 	 * user context.
 	 */
-        if (user_address == 0 || in_atomic() || !mm)
-                goto no_context;
+	if (unlikely(space == 0 || in_atomic() || !mm))
+		goto no_context;
 
 	/*
 	 * When we get here, the fault happened in the current
@@ -326,14 +344,15 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
 	 */
 	local_irq_enable();
 
-        down_read(&mm->mmap_sem);
+	down_read(&mm->mmap_sem);
 
-        vma = find_vma(mm, address);
-        if (!vma)
-                goto bad_area;
+	si_code = SEGV_MAPERR;
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
 
 #ifdef CONFIG_S390_EXEC_PROTECT
-	if (unlikely((user_address == 2) && !(vma->vm_flags & VM_EXEC)))
+	if (unlikely((space == 2) && !(vma->vm_flags & VM_EXEC)))
 		if (!signal_return(mm, regs, address, error_code))
 			/*
 			 * signal_return() has done an up_read(&mm->mmap_sem)
@@ -342,19 +361,19 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
 			return;
 #endif
 
-        if (vma->vm_start <= address) 
-                goto good_area;
-        if (!(vma->vm_flags & VM_GROWSDOWN))
-                goto bad_area;
-        if (expand_stack(vma, address))
-                goto bad_area;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+	if (expand_stack(vma, address))
+		goto bad_area;
 /*
  * Ok, we have a good vm_area for this memory access, so
  * we can handle it..
  */
 good_area:
 	si_code = SEGV_ACCERR;
-	if (!is_protection) {
+	if (!write) {
 		/* page not present, check vm flags */
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
 			goto bad_area;
@@ -369,7 +388,7 @@ survive:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	switch (handle_mm_fault(mm, vma, address, is_protection)) {
+	switch (handle_mm_fault(mm, vma, address, write)) {
 	case VM_FAULT_MINOR:
 		tsk->min_flt++;
 		break;
@@ -377,9 +396,12 @@ survive:
 		tsk->maj_flt++;
 		break;
 	case VM_FAULT_SIGBUS:
-		goto do_sigbus;
+		do_sigbus(regs, error_code, address);
+		return;
 	case VM_FAULT_OOM:
-		goto out_of_memory;
+		if (do_out_of_memory(regs, error_code, address))
+			goto survive;
+		return;
 	default:
 		BUG();
 	}
@@ -389,7 +411,7 @@ survive:
 	 * The instruction that caused the program check will
 	 * be repeated. Don't signal single step via SIGTRAP.
 	 */
-	clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+	clear_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
         return;
 
 /*
@@ -397,78 +419,38 @@ survive:
  * Fix it, but check if it's kernel or user first..
  */
 bad_area:
-        up_read(&mm->mmap_sem);
+	up_read(&mm->mmap_sem);
 
-        /* User mode accesses just cause a SIGSEGV */
-        if (regs->psw.mask & PSW_MASK_PSTATE) {
-                tsk->thread.prot_addr = address;
-                tsk->thread.trap_no = error_code;
+	/* User mode accesses just cause a SIGSEGV */
+	if (regs->psw.mask & PSW_MASK_PSTATE) {
+		tsk->thread.prot_addr = address;
+		tsk->thread.trap_no = error_code;
 		do_sigsegv(regs, error_code, si_code, address);
-                return;
+		return;
 	}
 
 no_context:
-        /* Are we prepared to handle this kernel fault?  */
-	fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK);
-	if (fixup) {
-		regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
-                return;
-        }
-
-/*
- * Oops. The kernel tried to access some bad page. We'll have to
- * terminate things with extreme prejudice.
- */
-        if (user_address == 0)
-                printk(KERN_ALERT "Unable to handle kernel pointer dereference"
-        	       " at virtual kernel address %p\n", (void *)address);
-        else
-                printk(KERN_ALERT "Unable to handle kernel paging request"
-		       " at virtual user address %p\n", (void *)address);
-
-        die("Oops", regs, error_code);
-        do_exit(SIGKILL);
-
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
-*/
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (regs->psw.mask & PSW_MASK_PSTATE)
-		do_exit(SIGKILL);
-	goto no_context;
-
-do_sigbus:
-	up_read(&mm->mmap_sem);
-
-	/*
-	 * Send a sigbus, regardless of whether we were in kernel
-	 * or user mode.
-	 */
-        tsk->thread.prot_addr = address;
-        tsk->thread.trap_no = error_code;
-	force_sig(SIGBUS, tsk);
-
-	/* Kernel mode? Handle exceptions or die */
-	if (!(regs->psw.mask & PSW_MASK_PSTATE))
-		goto no_context;
+	do_no_context(regs, error_code, address);
 }
 
-void do_protection_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_protection_exception(struct pt_regs *regs,
+				       unsigned long error_code)
 {
+	/* Protection exception is supressing, decrement psw address. */
 	regs->psw.addr -= (error_code >> 16);
+	/*
+	 * Check for low-address protection.  This needs to be treated
+	 * as a special case because the translation exception code
+	 * field is not guaranteed to contain valid data in this case.
+	 */
+	if (unlikely(!(S390_lowcore.trans_exc_code & 4))) {
+		do_low_address(regs, error_code);
+		return;
+	}
 	do_exception(regs, 4, 1);
 }
 
-void do_dat_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_dat_exception(struct pt_regs *regs, unsigned long error_code)
 {
 	do_exception(regs, error_code & 0xff, 0);
 }
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index b3e7c45efb63..916b72a8cde8 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -141,7 +141,9 @@ void __init paging_init(void)
 	__raw_local_irq_ssm(ssm_mask);
 
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA
 	max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS);
+#endif
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 	free_area_init_nodes(max_zone_pfns);
 }
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c
index d1947732fb3e..8143d1b948e7 100644
--- a/arch/sh/boards/hp6xx/pm.c
+++ b/arch/sh/boards/hp6xx/pm.c
@@ -27,9 +27,6 @@ static int hp6x0_pm_enter(suspend_state_t state)
 	u16 hd64461_stbcr;
 #endif
 
-	if (state != PM_SUSPEND_MEM)
-		return -EINVAL;
-
 #ifdef CONFIG_HD64461_ENABLER
 	outb(0, HD64461_PCC1CSCIER);
 
@@ -70,12 +67,9 @@ static int hp6x0_pm_enter(suspend_state_t state)
 	return 0;
 }
 
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
 static struct pm_ops hp6x0_pm_ops = {
-	.pm_disk_mode	= PM_DISK_FIRMWARE,
 	.enter		= hp6x0_pm_enter,
+	.valid		= pm_valid_only_mem,
 };
 
 static int __init hp6x0_pm_init(void)
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile
index 3c93012e91a3..ed5f5a9a3b3e 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/renesas/r7780rp/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the R7780RP-1 specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o
 
 obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c
deleted file mode 100644
index f74d2ffb3851..000000000000
--- a/arch/sh/boards/renesas/r7780rp/io.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Renesas Solutions Highlander R7780RP-1
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_r7780rp.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <asm/r7780rp.h>
-#include <asm/addrspace.h>
-
-static inline unsigned long port88796l(unsigned int port, int flag)
-{
-	unsigned long addr;
-
-	if (flag)
-		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1);
-	else
-		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000;
-
-	return addr;
-}
-
-#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
-#define CHECK_AX88796L_PORT(port) \
-  ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
-#else
-#define CHECK_AX88796L_PORT(port) (0)
-#endif
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-u8 r7780rp_inb(unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		return ctrl_inw(port88796l(port, 0)) & 0xff;
-	else if (is_pci_ioaddr(port))
-		return ctrl_inb(pci_ioaddr(port));
-
-	return ctrl_inw(port) & 0xff;
-}
-
-u8 r7780rp_inb_p(unsigned long port)
-{
-	u8 v;
-
-	if (CHECK_AX88796L_PORT(port))
-		v = ctrl_inw(port88796l(port, 0)) & 0xff;
-	else if (is_pci_ioaddr(port))
-		v = ctrl_inb(pci_ioaddr(port));
-	else
-		v = ctrl_inw(port) & 0xff;
-
-	ctrl_delay();
-
-	return v;
-}
-
-u16 r7780rp_inw(unsigned long port)
-{
-	if (is_pci_ioaddr(port))
-		return ctrl_inw(pci_ioaddr(port));
-
-	return ctrl_inw(port);
-}
-
-u32 r7780rp_inl(unsigned long port)
-{
-	if (is_pci_ioaddr(port))
-		return ctrl_inl(pci_ioaddr(port));
-
-	return ctrl_inl(port);
-}
-
-void r7780rp_outb(u8 value, unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		ctrl_outw(value, port88796l(port, 0));
-	else if (is_pci_ioaddr(port))
-		ctrl_outb(value, pci_ioaddr(port));
-	else
-		ctrl_outb(value, port);
-}
-
-void r7780rp_outb_p(u8 value, unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		ctrl_outw(value, port88796l(port, 0));
-	else if (is_pci_ioaddr(port))
-		ctrl_outb(value, pci_ioaddr(port));
-	else
-		ctrl_outb(value, port);
-
-	ctrl_delay();
-}
-
-void r7780rp_outw(u16 value, unsigned long port)
-{
-	if (is_pci_ioaddr(port))
-		ctrl_outw(value, pci_ioaddr(port));
-	else
-		ctrl_outw(value, port);
-}
-
-void r7780rp_outl(u32 value, unsigned long port)
-{
-	if (is_pci_ioaddr(port))
-		ctrl_outl(value, pci_ioaddr(port));
-	else
-		ctrl_outl(value, port);
-}
-
-void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
-{
-	volatile u16 *p;
-	u8 *buf = dst;
-
-	if (CHECK_AX88796L_PORT(port)) {
-		p = (volatile u16 *)port88796l(port, 0);
-		while (count--)
-			*buf++ = *p & 0xff;
-	} else if (is_pci_ioaddr(port)) {
-		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
-		while (count--)
-			*buf++ = *bp;
-	} else {
-		p = (volatile u16 *)port;
-		while (count--)
-			*buf++ = *p & 0xff;
-	}
-}
-
-void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
-{
-	volatile u16 *p;
-	u16 *buf = dst;
-
-	if (CHECK_AX88796L_PORT(port))
-		p = (volatile u16 *)port88796l(port, 1);
-	else if (is_pci_ioaddr(port))
-		p = (volatile u16 *)pci_ioaddr(port);
-	else
-		p = (volatile u16 *)port;
-
-	while (count--)
-		*buf++ = *p;
-
-	flush_dcache_all();
-}
-
-void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
-{
-	if (is_pci_ioaddr(port)) {
-		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
-		u32 *buf = dst;
-
-		while (count--)
-			*buf++ = *p;
-	}
-}
-
-void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
-{
-	volatile u16 *p;
-	const u8 *buf = src;
-
-	if (CHECK_AX88796L_PORT(port)) {
-		p = (volatile u16 *)port88796l(port, 0);
-		while (count--)
-			*p = *buf++;
-	} else if (is_pci_ioaddr(port)) {
-		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
-
-		while (count--)
-			*bp = *buf++;
-	} else
-		while (count--)
-			ctrl_outb(*buf++, port);
-}
-
-void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
-{
-	volatile u16 *p;
-	const u16 *buf = src;
-
-	if (CHECK_AX88796L_PORT(port))
-		p = (volatile u16 *)port88796l(port, 1);
-	else if (is_pci_ioaddr(port))
-		p = (volatile u16 *)pci_ioaddr(port);
-	else
-		p = (volatile u16 *)port;
-
-	while (count--)
-		*p = *buf++;
-
-	flush_dcache_all();
-}
-
-void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
-{
-	const u32 *buf = src;
-	u32 *p;
-
-	if (is_pci_ioaddr(port))
-		p = (u32 *)pci_ioaddr(port);
-	else
-		p = (u32 *)port;
-
-	while (count--)
-		ctrl_outl(*buf++, (unsigned long)p);
-}
-
-void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
-{
-	if (CHECK_AX88796L_PORT(port))
-		return (void __iomem *)port88796l(port, size > 1);
-	else if (is_pci_ioaddr(port))
-		return (void __iomem *)pci_ioaddr(port);
-
-	return (void __iomem *)port;
-}
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 0d74db9f1792..2faba6679e64 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -187,31 +187,7 @@ static void __init r7780rp_setup(char **cmdline_p)
 struct sh_machine_vector mv_r7780rp __initmv = {
 	.mv_name		= "Highlander R7780RP-1",
 	.mv_setup		= r7780rp_setup,
-
 	.mv_nr_irqs		= 109,
-
-	.mv_inb			= r7780rp_inb,
-	.mv_inw			= r7780rp_inw,
-	.mv_inl			= r7780rp_inl,
-	.mv_outb		= r7780rp_outb,
-	.mv_outw		= r7780rp_outw,
-	.mv_outl		= r7780rp_outl,
-
-	.mv_inb_p		= r7780rp_inb_p,
-	.mv_inw_p		= r7780rp_inw,
-	.mv_inl_p		= r7780rp_inl,
-	.mv_outb_p		= r7780rp_outb_p,
-	.mv_outw_p		= r7780rp_outw,
-	.mv_outl_p		= r7780rp_outl,
-
-	.mv_insb		= r7780rp_insb,
-	.mv_insw		= r7780rp_insw,
-	.mv_insl		= r7780rp_insl,
-	.mv_outsb		= r7780rp_outsb,
-	.mv_outsw		= r7780rp_outsw,
-	.mv_outsl		= r7780rp_outsl,
-
-	.mv_ioport_map		= r7780rp_ioport_map,
 	.mv_init_irq		= init_r7780rp_IRQ,
 };
 ALIAS_MV(r7780rp)
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 44b42082a0af..593f26a85e9c 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -12,6 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/pata_platform.h>
 #include <linux/serial_8250.h>
+#include <linux/sm501.h>
 #include <linux/pm.h>
 #include <asm/machvec.h>
 #include <asm/rts7751r2d.h>
@@ -111,10 +112,35 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= 0x10000000,
+		.end	= 0x13e00000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 0x13e00000,
+		.end	= 0x13ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 32,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
 static struct platform_device *rts7751r2d_devices[] __initdata = {
 	&uart_device,
 	&heartbeat_device,
 	&cf_ide_device,
+	&sm501_device,
 };
 
 static int __init rts7751r2d_devices_setup(void)
diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d_defconfig
index db6a02df5af6..a59bb78bd071 100644
--- a/arch/sh/configs/rts7751r2d_defconfig
+++ b/arch/sh/configs/rts7751r2d_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Thu Feb 15 17:17:29 2007
+# Linux kernel version: 2.6.21-rc1
+# Thu Mar  1 16:42:40 2007
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_GENERIC_TIME is not set
@@ -33,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -119,7 +119,6 @@ CONFIG_SH_RTS7751R2D=y
 # CONFIG_SH_SHMIN is not set
 # CONFIG_SH_7206_SOLUTION_ENGINE is not set
 # CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_ASDAP310 is not set
 # CONFIG_SH_UNKNOWN is not set
 
 #
@@ -281,7 +280,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 # CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
@@ -433,6 +432,7 @@ CONFIG_FW_LOADER=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -770,7 +770,26 @@ CONFIG_NET_WIRELESS=y
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -781,7 +800,10 @@ CONFIG_NET_WIRELESS=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -857,6 +879,11 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -869,9 +896,66 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
 
 #
 # Sound
@@ -985,6 +1069,12 @@ CONFIG_SOUND_PRIME=m
 CONFIG_AC97_BUS=m
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1237,7 +1327,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ecf16344f94a..224e007736fb 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -214,6 +214,12 @@ retry:
 			continue;
 		}
 
+		if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
+			DBG(" unavailable -- skipping, value %x size %x\n",
+					bar_value, bar_size);
+			continue;
+		}
+
 #ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
 		/* Write it out and update our limit */
 		early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 4b339a640b13..726acfcb9b77 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -3,7 +3,7 @@
  *
  * CPU init code
  *
- * Copyright (C) 2002 - 2006  Paul Mundt
+ * Copyright (C) 2002 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -48,8 +48,19 @@ static void __init cache_init(void)
 {
 	unsigned long ccr, flags;
 
-	if (current_cpu_data.type == CPU_SH_NONE)
-		panic("Unknown CPU");
+	/* First setup the rest of the I-cache info */
+	current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
+				      current_cpu_data.icache.linesz;
+
+	current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
+				    current_cpu_data.icache.linesz;
+
+	/* And the D-cache too */
+	current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
+				      current_cpu_data.dcache.linesz;
+
+	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
+				    current_cpu_data.dcache.linesz;
 
 	jump_to_P2();
 	ccr = ctrl_inl(CCR);
@@ -200,6 +211,9 @@ asmlinkage void __init sh_cpu_init(void)
 	/* First, probe the CPU */
 	detect_cpu_and_cache_system();
 
+	if (current_cpu_data.type == CPU_SH_NONE)
+		panic("Unknown CPU");
+
 	/* Init the cache */
 	cache_init();
 
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index d0440b269702..d2c157917999 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -18,8 +18,8 @@
 #include <asm/freq.h>
 #include <asm/io.h>
 
-const static int pll1rate[]={1,2};
-const static int pfc_divisors[]={1,2,0,4};
+static const int pll1rate[] = {1,2};
+static const int pfc_divisors[] = {1,2,0,4};
 
 #if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2)
 #define PLL2 (4)
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 7f7d292f36ec..c16dc8fec489 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -165,6 +165,7 @@ ENTRY(exception_handler)
 
 interrupt_entry:
 	mov	r9,r4
+	mov	r15,r5
 	mov.l	6f,r9
 	mov.l	7f,r8
 	jmp	@r8
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index a9ad309c6a33..82d7f991ef6b 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -18,8 +18,8 @@
 #include <asm/freq.h>
 #include <asm/io.h>
 
-const static int pll1rate[]={1,2,3,4,6,8};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
 #if (CONFIG_SH_CLK_MD == 2)
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index c19205b0f2c0..f3e827f29a46 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -514,13 +514,16 @@ skip_save:
 
 interrupt_exception:
 	mov.l	1f, r9
+	mov.l	2f, r4
+	mov.l	@r4, r4
 	jmp	@r9
-	 nop
+	 mov	r15, r5
 	rts
 	 nop
 
 	.align 2
 1:	.long	do_IRQ
+2:	.long	INTEVT
 
 	.align	2
 ENTRY(exception_none)
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 9d28c88d2f9d..58950de2696d 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -195,13 +195,6 @@ int __init detect_cpu_and_cache_system(void)
 
 	}
 
-	/* Setup the rest of the I-cache info */
-	current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -
-				      current_cpu_data.icache.linesz;
-
-	current_cpu_data.icache.way_size = current_cpu_data.icache.sets *
-				    current_cpu_data.icache.linesz;
-
 	/* And the rest of the D-cache */
 	if (current_cpu_data.dcache.ways > 1) {
 		size = sizes[(cvr >> 16) & 0xf];
@@ -209,12 +202,6 @@ int __init detect_cpu_and_cache_system(void)
 		current_cpu_data.dcache.sets		= (size >> 6);
 	}
 
-	current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -
-				      current_cpu_data.dcache.linesz;
-
-	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
-				    current_cpu_data.dcache.linesz;
-
 	/*
 	 * Setup the L2 cache desc
 	 *
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index ab4ebb856c2a..b46728027195 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -224,7 +224,7 @@ work_resched:
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_SYSCALL_TRACE, r0
+	tst	#_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP, r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
 #ifdef CONFIG_TRACE_IRQFLAGS
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index 66626c03e1ee..771ea4230441 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <asm/machvec.h>
-#include <asm/cacheflush.h>
 
 #ifdef CONFIG_CPU_SH3
 /* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
@@ -96,7 +95,6 @@ void generic_insw(unsigned long port, void *dst, unsigned long count)
 	while (count--)
 		*buf++ = *port_addr;
 
-	flush_dcache_all();
 	dummy_read();
 }
 
@@ -171,7 +169,6 @@ void generic_outsw(unsigned long port, const void *src, unsigned long count)
 	while (count--)
 		*port_addr = *buf++;
 
-	flush_dcache_all();
 	dummy_read();
 }
 
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 67be2b6e8cd1..9bdd8a00cd4a 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
-#include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
@@ -82,13 +81,9 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 #endif
 
-asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
-		      unsigned long r6, unsigned long r7,
-		      struct pt_regs __regs)
+asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
-	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	struct pt_regs *old_regs = set_irq_regs(regs);
-	int irq;
 #ifdef CONFIG_4KSTACKS
 	union irq_ctx *curctx, *irqctx;
 #endif
@@ -111,13 +106,7 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 	}
 #endif
 
-#ifdef CONFIG_CPU_HAS_INTEVT
-	irq = evt2irq(ctrl_inl(INTEVT));
-#else
-	irq = r4;
-#endif
-
-	irq = irq_demux(irq);
+	irq = irq_demux(evt2irq(irq));
 
 #ifdef CONFIG_4KSTACKS
 	curctx = (union irq_ctx *)current_thread_info();
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index 9d6a438b3eaf..e7607366ac4e 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -250,12 +250,11 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 		childregs->regs[15] = usp;
 		ti->addr_limit = USER_DS;
 	} else {
-		childregs->regs[15] = (unsigned long)task_stack_page(p) +
-							THREAD_SIZE;
+		childregs->regs[15] = (unsigned long)childregs;
 		ti->addr_limit = KERNEL_DS;
 	}
 
-        if (clone_flags & CLONE_SETTLS)
+	if (clone_flags & CLONE_SETTLS)
 		childregs->gbr = childregs->regs[0];
 
 	childregs->regs[0] = 0; /* Set return value for child */
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index 04ca13a041c1..855f7246cfff 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -8,7 +8,6 @@
  * SuperH version:   Copyright (C) 1999, 2000  Kaz Kojima & Niibe Yutaka
  *
  */
-
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -20,8 +19,7 @@
 #include <linux/slab.h>
 #include <linux/security.h>
 #include <linux/signal.h>
-
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -59,6 +57,23 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 	return 0;
 }
 
+static void ptrace_disable_singlestep(struct task_struct *child)
+{
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+	/*
+	 * Ensure the UBC is not programmed at the next context switch.
+	 *
+	 * Normally this is not needed but there are sequences such as
+	 * singlestep, signal delivery, and continue that leave the
+	 * ubc_pc non-zero leading to spurious SIGTRAPs.
+	 */
+	if (child->thread.ubc_pc != 0) {
+		ubc_usercnt -= 1;
+		child->thread.ubc_pc = 0;
+	}
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -66,7 +81,7 @@ static inline int put_stack_long(struct task_struct *task, int offset,
  */
 void ptrace_disable(struct task_struct *child)
 {
-	/* nothing to do.. */
+	ptrace_disable_singlestep(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -76,7 +91,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 	switch (request) {
 	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */ 
+	case PTRACE_PEEKTEXT: /* read word at location addr. */
 	case PTRACE_PEEKDATA: {
 		unsigned long tmp;
 		int copied;
@@ -94,7 +109,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		unsigned long tmp;
 
 		ret = -EIO;
-		if ((addr & 3) || addr < 0 || 
+		if ((addr & 3) || addr < 0 ||
 		    addr > sizeof(struct user) - 3)
 			break;
 
@@ -129,7 +144,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
-		if ((addr & 3) || addr < 0 || 
+		if ((addr & 3) || addr < 0 ||
 		    addr > sizeof(struct user) - 3)
 			break;
 
@@ -156,6 +171,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		else
 			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+		ptrace_disable_singlestep(child);
+
 		child->exit_code = data;
 		wake_up_process(child);
 		ret = 0;
@@ -163,14 +181,15 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	}
 
 /*
- * make the child exit.  Best I can do is send it a sigkill. 
- * perhaps it should be put in the status that it wants to 
+ * make the child exit.  Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
  * exit.
  */
 	case PTRACE_KILL: {
 		ret = 0;
 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			break;
+		ptrace_disable_singlestep(child);
 		child->exit_code = SIGKILL;
 		wake_up_process(child);
 		break;
@@ -196,6 +215,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ubc_usercnt += 1;
 		child->thread.ubc_pc = pc;
 
+		set_tsk_thread_flag(child, TIF_SINGLESTEP);
 		child->exit_code = data;
 		/* give it a chance to run. */
 		wake_up_process(child);
@@ -248,14 +268,15 @@ asmlinkage void do_syscall_trace(void)
 {
 	struct task_struct *tsk = current;
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    !test_thread_flag(TIF_SINGLESTEP))
 		return;
 	if (!(tsk->ptrace & PT_PTRACED))
 		return;
 	/* the 0x80 provides a way for the tracing parent to distinguish
 	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
+				 !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
 
 	/*
 	 * this isn't the same as continuing with a signal, but it will do
diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c
index fe1b276c97c6..6e0d10fac4a8 100644
--- a/arch/sh/kernel/sh_ksyms.c
+++ b/arch/sh/kernel/sh_ksyms.c
@@ -82,9 +82,6 @@ DECLARE_EXPORT(__movstr);
 DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udiv_qrnnd_16);
-DECLARE_EXPORT(__udivsi3_i4i);
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c
index 32f10a03fbb5..9f39ef1f73da 100644
--- a/arch/sh/kernel/signal.c
+++ b/arch/sh/kernel/signal.c
@@ -589,6 +589,8 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
 		}
+
+		return;
 	}
 
  no_signal:
@@ -598,7 +600,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 		if (regs->regs[0] == -ERESTARTNOHAND ||
 		    regs->regs[0] == -ERESTARTSYS ||
 		    regs->regs[0] == -ERESTARTNOINTR) {
-		    	regs->regs[0] = save_r0;
+			regs->regs[0] = save_r0;
 			regs->pc -= 2;
 		} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
 			regs->pc -= 2;
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 75de165867a0..78a6c09875b2 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -3,6 +3,7 @@
  * Written by Niibe Yutaka
  */
 #include <asm/thread_info.h>
+#include <asm/cache.h>
 #include <asm-generic/vmlinux.lds.h>
 
 #ifdef CONFIG_CPU_LITTLE_ENDIAN
@@ -53,7 +54,7 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   .data.page_aligned : { *(.data.page_aligned) }
 
-  . = ALIGN(32);
+  . = ALIGN(L1_CACHE_BYTES);
   __per_cpu_start = .;
   .data.percpu : { *(.data.percpu) }
   __per_cpu_end = .;
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index b5681e3f9684..0b9cca5c7cb4 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -3,7 +3,7 @@
 #
 
 lib-y  = delay.o memset.o memmove.o memchr.o \
-	 checksum.o strcasecmp.o strlen.o div64.o udivdi3.o \
+	 checksum.o strlen.o div64.o udivdi3.o \
 	 div64-generic.o
 
 memcpy-y			:= memcpy.o
diff --git a/arch/sh/lib/strcasecmp.c b/arch/sh/lib/strcasecmp.c
deleted file mode 100644
index 4e57a216feaf..000000000000
--- a/arch/sh/lib/strcasecmp.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/arch/alpha/lib/strcasecmp.c
- */
-
-#include <linux/string.h>
-
-
-/* We handle nothing here except the C locale.  Since this is used in
-   only one place, on strings known to contain only 7 bit ASCII, this
-   is ok.  */
-
-int strcasecmp(const char *a, const char *b)
-{
-	int ca, cb;
-
-	do {
-		ca = *a++ & 0xff;
-		cb = *b++ & 0xff;
-		if (ca >= 'A' && ca <= 'Z')
-			ca += 'a' - 'A';
-		if (cb >= 'A' && cb <= 'Z')
-			cb += 'a' - 'A';
-	} while (ca == cb && ca != '\0');
-
-	return ca - cb;
-}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index e0cd4b7f4aeb..981b04089055 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -237,20 +237,10 @@ static inline void flush_cache_4096(unsigned long start,
 /*
  * Write back & invalidate the D-cache of the page.
  * (To avoid "alias" issues)
- *
- * This uses a lazy write-back on UP, which is explicitly
- * disabled on SMP.
  */
 void flush_dcache_page(struct page *page)
 {
-#ifndef CONFIG_SMP
-	struct address_space *mapping = page_mapping(page);
-
-	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
-	else
-#endif
-	{
+	if (test_bit(PG_mapped, &page->flags)) {
 		unsigned long phys = PHYSADDR(page_address(page));
 		unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
 		int i, n;
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 31f8deb7a158..4896d7376926 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -3,11 +3,11 @@
  *
  * Copyright (C) 1999, 2000  Niibe Yutaka
  * Copyright (C) 2004  Alex Song
- * Copyright (C) 2006  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
+ *
  */
 #include <linux/init.h>
 #include <linux/mman.h>
@@ -51,6 +51,7 @@ static inline void cache_wback_all(void)
 
 			if ((data & v) == v)
 				ctrl_outl(data & ~v, addr);
+
 		}
 
 		addrstart += current_cpu_data.dcache.way_incr;
@@ -127,11 +128,7 @@ static void __flush_dcache_page(unsigned long phys)
  */
 void flush_dcache_page(struct page *page)
 {
-	struct address_space *mapping = page_mapping(page);
-
-	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
-	else
+	if (test_bit(PG_mapped, &page->flags))
 		__flush_dcache_page(PHYSADDR(page_address(page)));
 }
 
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 969efeceb928..df69da9ca69c 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -23,6 +23,7 @@ extern struct mutex p3map_mutex[];
  */
 void clear_user_page(void *to, unsigned long address, struct page *page)
 {
+	__set_bit(PG_mapped, &page->flags);
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
 		clear_page(to);
 	else {
@@ -58,6 +59,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 void copy_user_page(void *to, void *from, unsigned long address,
 		    struct page *page)
 {
+	__set_bit(PG_mapped, &page->flags);
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
 		copy_page(to, from);
 	else {
@@ -82,3 +84,23 @@ void copy_user_page(void *to, void *from, unsigned long address,
 		mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
 	}
 }
+
+/*
+ * For SH-4, we have our own implementation for ptep_get_and_clear
+ */
+inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+
+	pte_clear(mm, addr, ptep);
+	if (!pte_not_present(pte)) {
+		unsigned long pfn = pte_pfn(pte);
+		if (pfn_valid(pfn)) {
+			struct page *page = pfn_to_page(pfn);
+			struct address_space *mapping = page_mapping(page);
+			if (!mapping || !mapping_writably_mapped(mapping))
+				__clear_bit(PG_mapped, &page->flags);
+		}
+	}
+	return pte;
+}
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 887ab9d18ccd..a4b015f95a3a 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -7,7 +7,9 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
+ *
  */
+
 #include <linux/init.h>
 #include <linux/mman.h>
 #include <linux/mm.h>
@@ -74,6 +76,7 @@ void clear_user_page(void *to, unsigned long address, struct page *pg)
 {
 	struct page *page = virt_to_page(to);
 
+	__set_bit(PG_mapped, &page->flags);
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
 		clear_page(to);
 		__flush_wback_region(to, PAGE_SIZE);
@@ -92,11 +95,12 @@ void clear_user_page(void *to, unsigned long address, struct page *pg)
  * @from: P1 address
  * @address: U0 address to be mapped
  */
-void copy_user_page(void *to, void *from, unsigned long address,
-		    struct page *pg)
+void copy_user_page(void *to, void *from, unsigned long address, struct page *pg)
 {
 	struct page *page = virt_to_page(to);
 
+
+	__set_bit(PG_mapped, &page->flags);
 	if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
 		copy_page(to, from);
 		__flush_wback_region(to, PAGE_SIZE);
@@ -108,3 +112,26 @@ void copy_user_page(void *to, void *from, unsigned long address,
 		__flush_wback_region(to, PAGE_SIZE);
 	}
 }
+
+/*
+ * For SH7705, we have our own implementation for ptep_get_and_clear
+ * Copied from pg-sh4.c
+ */
+inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+
+	pte_clear(mm, addr, ptep);
+	if (!pte_not_present(pte)) {
+		unsigned long pfn = pte_pfn(pte);
+		if (pfn_valid(pfn)) {
+			struct page *page = pfn_to_page(pfn);
+			struct address_space *mapping = page_mapping(page);
+			if (!mapping || !mapping_writably_mapped(mapping))
+				__clear_bit(PG_mapped, &page->flags);
+		}
+	}
+
+	return pte;
+}
+
diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlb-flush.c
index d2f7b4a2eb05..6f45c1f8a7fe 100644
--- a/arch/sh/mm/tlb-flush.c
+++ b/arch/sh/mm/tlb-flush.c
@@ -2,17 +2,15 @@
  * TLB flushing operations for SH with an MMU.
  *
  *  Copyright (C) 1999  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/mm.h>
-#include <linux/io.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
 
 void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 {
@@ -140,54 +138,3 @@ void local_flush_tlb_all(void)
 	ctrl_barrier();
 	local_irq_restore(flags);
 }
-
-void update_mmu_cache(struct vm_area_struct *vma,
-		      unsigned long address, pte_t pte)
-{
-	unsigned long flags;
-	unsigned long pteval;
-	unsigned long vpn;
-	struct page *page;
-	unsigned long pfn = pte_pfn(pte);
-	struct address_space *mapping;
-
-	if (!pfn_valid(pfn))
-		return;
-
-	page = pfn_to_page(pfn);
-	mapping = page_mapping(page);
-	if (mapping) {
-		unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-		if (dirty)
-			__flush_wback_region((void *)P1SEGADDR(phys),
-					     PAGE_SIZE);
-	}
-
-	local_irq_save(flags);
-
-	/* Set PTEH register */
-	vpn = (address & MMU_VPN_MASK) | get_asid();
-	ctrl_outl(vpn, MMU_PTEH);
-
-	pteval = pte_val(pte);
-
-#ifdef CONFIG_CPU_HAS_PTEA
-	/* Set PTEA register */
-	/* TODO: make this look less hacky */
-	ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
-#endif
-
-	/* Set PTEL register */
-	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#if defined(CONFIG_SH_WRITETHROUGH) && defined(CONFIG_CPU_SH4)
-	pteval |= _PAGE_WT;
-#endif
-	/* conveniently, we want all the software flags to be 0 anyway */
-	ctrl_outl(pteval, MMU_PTEL);
-
-	/* Load the TLB */
-	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
-	local_irq_restore(flags);
-}
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index e5e76eb7ee09..7fbfd5a11ffa 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -8,9 +8,69 @@
  *
  * Released under the terms of the GNU GPL v2.0.
  */
-#include <linux/io.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+
 #include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void update_mmu_cache(struct vm_area_struct * vma,
+		      unsigned long address, pte_t pte)
+{
+	unsigned long flags;
+	unsigned long pteval;
+	unsigned long vpn;
+
+	/* Ptrace may call this routine. */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+	{
+		struct page *page = pte_page(pte);
+		unsigned long pfn = pte_pfn(pte);
+
+		if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) {
+			unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+
+			__flush_wback_region((void *)P1SEGADDR(phys),
+					     PAGE_SIZE);
+			__set_bit(PG_mapped, &page->flags);
+		}
+	}
+#endif
+
+	local_irq_save(flags);
+
+	/* Set PTEH register */
+	vpn = (address & MMU_VPN_MASK) | get_asid();
+	ctrl_outl(vpn, MMU_PTEH);
+
+	pteval = pte_val(pte);
+
+	/* Set PTEL register */
+	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+	/* conveniently, we want all the software flags to be 0 anyway */
+	ctrl_outl(pteval, MMU_PTEL);
+
+	/* Load the TLB */
+	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+	local_irq_restore(flags);
+}
 
 void local_flush_tlb_one(unsigned long asid, unsigned long page)
 {
@@ -34,3 +94,4 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	for (i = 0; i < ways; i++)
 		ctrl_outl(data, addr + (i << 8));
 }
+
diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c
index 221e7095473d..f74cf667c8fa 100644
--- a/arch/sh/mm/tlb-sh4.c
+++ b/arch/sh/mm/tlb-sh4.c
@@ -8,9 +8,74 @@
  *
  * Released under the terms of the GNU GPL v2.0.
  */
-#include <linux/io.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+
 #include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void update_mmu_cache(struct vm_area_struct * vma,
+		      unsigned long address, pte_t pte)
+{
+	unsigned long flags;
+	unsigned long pteval;
+	unsigned long vpn;
+	struct page *page;
+	unsigned long pfn;
+
+	/* Ptrace may call this routine. */
+	if (vma && current->active_mm != vma->vm_mm)
+		return;
+
+	pfn = pte_pfn(pte);
+	if (pfn_valid(pfn)) {
+		page = pfn_to_page(pfn);
+		if (!test_bit(PG_mapped, &page->flags)) {
+			unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+			__flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE);
+			__set_bit(PG_mapped, &page->flags);
+		}
+	}
+
+	local_irq_save(flags);
+
+	/* Set PTEH register */
+	vpn = (address & MMU_VPN_MASK) | get_asid();
+	ctrl_outl(vpn, MMU_PTEH);
+
+	pteval = pte_val(pte);
+
+	/* Set PTEA register */
+	if (cpu_data->flags & CPU_HAS_PTEA)
+		/* TODO: make this look less hacky */
+		ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
+
+	/* Set PTEL register */
+	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+#ifdef CONFIG_SH_WRITETHROUGH
+	pteval |= _PAGE_WT;
+#endif
+	/* conveniently, we want all the software flags to be 0 anyway */
+	ctrl_outl(pteval, MMU_PTEL);
+
+	/* Load the TLB */
+	asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+	local_irq_restore(flags);
+}
 
 void local_flush_tlb_one(unsigned long asid, unsigned long page)
 {
@@ -28,3 +93,4 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
 	ctrl_outl(data, addr);
 	back_to_P1();
 }
+
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index ba58c3a061fd..7bb86b9cdaa3 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -25,7 +25,7 @@
 struct linux_ebus *ebus_chain = NULL;
 
 /* We are together with pcic.c under CONFIG_PCI. */
-extern unsigned int pcic_pin_to_irq(unsigned int, char *name);
+extern unsigned int pcic_pin_to_irq(unsigned int, const char *name);
 
 /*
  * IRQ Blacklist
@@ -69,7 +69,7 @@ static inline unsigned long ebus_alloc(size_t size)
 
 /*
  */
-int __init ebus_blacklist_irq(char *name)
+int __init ebus_blacklist_irq(const char *name)
 {
 	struct ebus_device_irq *dp;
 
@@ -86,8 +86,8 @@ int __init ebus_blacklist_irq(char *name)
 void __init fill_ebus_child(struct device_node *dp,
 			    struct linux_ebus_child *dev)
 {
-	int *regs;
-	int *irqs;
+	const int *regs;
+	const int *irqs;
 	int i, len;
 
 	dev->prom_node = dp;
@@ -146,9 +146,9 @@ void __init fill_ebus_child(struct device_node *dp,
 
 void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
 {
-	struct linux_prom_registers *regs;
+	const struct linux_prom_registers *regs;
 	struct linux_ebus_child *child;
-	int *irqs;
+	const int *irqs;
 	int i, n, len;
 	unsigned long baseaddr;
 
@@ -269,7 +269,7 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d
 
 void __init ebus_init(void)
 {
-	struct linux_prom_pci_registers *regs;
+	const struct linux_prom_pci_registers *regs;
 	struct linux_pbm_info *pbm;
 	struct linux_ebus_device *dev;
 	struct linux_ebus *ebus;
diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index dab6169e31ca..fd7f8cb668a3 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -210,7 +210,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(u32 *addr);
+	unsigned int	(*get_flags)(const u32 *addr);
 };
 
 /*
@@ -270,7 +270,7 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(u32 *addr)
+static unsigned int of_bus_default_get_flags(const u32 *addr)
 {
 	return IORESOURCE_MEM;
 }
@@ -334,7 +334,7 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(u32 *addr)
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
 {
 	unsigned int flags = 0;
 	u32 w = addr[0];
@@ -375,7 +375,7 @@ static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 	return of_bus_default_map(addr, range, na, ns, pna);
 }
 
-static unsigned int of_bus_sbus_get_flags(u32 *addr)
+static unsigned int of_bus_sbus_get_flags(const u32 *addr)
 {
 	return IORESOURCE_MEM;
 }
@@ -432,7 +432,7 @@ static int __init build_one_resource(struct device_node *parent,
 				     u32 *addr,
 				     int na, int ns, int pna)
 {
-	u32 *ranges;
+	const u32 *ranges;
 	unsigned int rlen;
 	int rone;
 
@@ -470,7 +470,7 @@ static void __init build_device_resources(struct of_device *op,
 	struct of_bus *bus;
 	int na, ns;
 	int index, num_reg;
-	void *preg;
+	const void *preg;
 
 	if (!parent)
 		return;
@@ -492,10 +492,10 @@ static void __init build_device_resources(struct of_device *op,
 	for (index = 0; index < num_reg; index++) {
 		struct resource *r = &op->resource[index];
 		u32 addr[OF_MAX_ADDR_CELLS];
-		u32 *reg = (preg + (index * ((na + ns) * 4)));
+		const u32 *reg = (preg + (index * ((na + ns) * 4)));
 		struct device_node *dp = op->node;
 		struct device_node *pp = p_op->node;
-		struct of_bus *pbus;
+		struct of_bus *pbus, *dbus;
 		u64 size, result = OF_BAD_ADDR;
 		unsigned long flags;
 		int dna, dns;
@@ -516,6 +516,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		dna = na;
 		dns = ns;
+		dbus = bus;
 
 		while (1) {
 			dp = pp;
@@ -528,13 +529,13 @@ static void __init build_device_resources(struct of_device *op,
 			pbus = of_match_bus(pp);
 			pbus->count_cells(dp, &pna, &pns);
 
-			if (build_one_resource(dp, bus, pbus, addr,
+			if (build_one_resource(dp, dbus, pbus, addr,
 					       dna, dns, pna))
 				break;
 
 			dna = pna;
 			dns = pns;
-			bus = pbus;
+			dbus = pbus;
 		}
 
 	build_res:
@@ -549,9 +550,6 @@ static void __init build_device_resources(struct of_device *op,
 			r->start = result & 0xffffffff;
 			r->end = result + size - 1;
 			r->flags = flags | ((result >> 32ULL) & 0xffUL);
-		} else {
-			r->start = ~0UL;
-			r->end = ~0UL;
 		}
 		r->name = op->node->name;
 	}
@@ -561,7 +559,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 						 struct device *parent)
 {
 	struct of_device *op = kzalloc(sizeof(*op), GFP_KERNEL);
-	struct linux_prom_irqs *intr;
+	const struct linux_prom_irqs *intr;
 	int len, i;
 
 	if (!op)
@@ -581,7 +579,8 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 		for (i = 0; i < op->num_irqs; i++)
 			op->irqs[i] = intr[i].pri;
 	} else {
-		unsigned int *irq = of_get_property(dp, "interrupts", &len);
+		const unsigned int *irq =
+			of_get_property(dp, "interrupts", &len);
 
 		if (irq) {
 			op->num_irqs = len / sizeof(unsigned int);
@@ -596,7 +595,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 			0, 0, 1, 2, 0, 3, 0, 4, 0, 5, 0, 6, 0, 7, 0, 0,
 		};
 		struct device_node *io_unit, *sbi = dp->parent;
-		struct linux_prom_registers *regs;
+		const struct linux_prom_registers *regs;
 		int board, slot;
 
 		while (sbi) {
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 207f1b6eef53..5ca7e8f42bd9 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -37,8 +37,6 @@
 #include <asm/irq_regs.h>
 
 
-unsigned int pcic_pin_to_irq(unsigned int pin, char *name);
-
 /*
  * I studied different documents and many live PROMs both from 2.30
  * family and 3.xx versions. I came to the amazing conclusion: there is
@@ -601,7 +599,7 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node)
 /*
  * Normally called from {do_}pci_scan_bus...
  */
-void __init pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 	int i, has_io, has_mem;
@@ -681,7 +679,7 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
  * pcic_pin_to_irq() is exported to ebus.c.
  */
 unsigned int
-pcic_pin_to_irq(unsigned int pin, char *name)
+pcic_pin_to_irq(unsigned int pin, const char *name)
 {
 	struct linux_pcic *pcic = &pcic0;
 	unsigned int irq;
@@ -842,7 +840,7 @@ static void watchdog_reset() {
 /*
  * Other archs parse arguments here.
  */
-char * __init pcibios_setup(char *str)
+char * __devinit pcibios_setup(char *str)
 {
 	return str;
 }
@@ -944,6 +942,14 @@ int pcibios_assign_resource(struct pci_dev *pdev, int resource)
 	return -ENXIO;
 }
 
+struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+	struct pcidev_cookie *pc = pdev->sysdata;
+
+	return pc->prom_node;
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
 /*
  * This probably belongs here rather than ioport.c because
  * we do not want this crud linked into SBus kernels.
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 113bd48a89bd..fc874e63a499 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -348,7 +348,7 @@ void exit_thread(void)
 #ifndef CONFIG_SMP
 	if(last_task_used_math == current) {
 #else
-	if(current_thread_info()->flags & _TIF_USEDFPU) {
+	if (test_thread_flag(TIF_USEDFPU)) {
 #endif
 		/* Keep process from leaving FPU in a bogon state. */
 		put_psr(get_psr() | PSR_EF);
@@ -357,7 +357,7 @@ void exit_thread(void)
 #ifndef CONFIG_SMP
 		last_task_used_math = NULL;
 #else
-		current_thread_info()->flags &= ~_TIF_USEDFPU;
+		clear_thread_flag(TIF_USEDFPU);
 #endif
 	}
 }
@@ -371,7 +371,7 @@ void flush_thread(void)
 #ifndef CONFIG_SMP
 	if(last_task_used_math == current) {
 #else
-	if(current_thread_info()->flags & _TIF_USEDFPU) {
+	if (test_thread_flag(TIF_USEDFPU)) {
 #endif
 		/* Clean the fpu. */
 		put_psr(get_psr() | PSR_EF);
@@ -380,7 +380,7 @@ void flush_thread(void)
 #ifndef CONFIG_SMP
 		last_task_used_math = NULL;
 #else
-		current_thread_info()->flags &= ~_TIF_USEDFPU;
+		clear_thread_flag(TIF_USEDFPU);
 #endif
 	}
 
@@ -466,13 +466,13 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 #ifndef CONFIG_SMP
 	if(last_task_used_math == current) {
 #else
-	if(current_thread_info()->flags & _TIF_USEDFPU) {
+	if (test_thread_flag(TIF_USEDFPU)) {
 #endif
 		put_psr(get_psr() | PSR_EF);
 		fpsave(&p->thread.float_regs[0], &p->thread.fsr,
 		       &p->thread.fpqueue[0], &p->thread.fpqdepth);
 #ifdef CONFIG_SMP
-		current_thread_info()->flags &= ~_TIF_USEDFPU;
+		clear_thread_flag(TIF_USEDFPU);
 #endif
 	}
 
@@ -609,13 +609,13 @@ int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs)
 		return 1;
 	}
 #ifdef CONFIG_SMP
-	if (current_thread_info()->flags & _TIF_USEDFPU) {
+	if (test_thread_flag(TIF_USEDFPU)) {
 		put_psr(get_psr() | PSR_EF);
 		fpsave(&current->thread.float_regs[0], &current->thread.fsr,
 		       &current->thread.fpqueue[0], &current->thread.fpqdepth);
 		if (regs != NULL) {
 			regs->psr &= ~(PSR_EF);
-			current_thread_info()->flags &= ~(_TIF_USEDFPU);
+			clear_thread_flag(TIF_USEDFPU);
 		}
 	}
 #else
diff --git a/arch/sparc/kernel/prom.c b/arch/sparc/kernel/prom.c
index 2cc302b6bec0..eed140b3c739 100644
--- a/arch/sparc/kernel/prom.c
+++ b/arch/sparc/kernel/prom.c
@@ -32,12 +32,13 @@ static struct device_node *allnodes;
  */
 static DEFINE_RWLOCK(devtree_lock);
 
-int of_device_is_compatible(struct device_node *device, const char *compat)
+int of_device_is_compatible(const struct device_node *device,
+			    const char *compat)
 {
 	const char* cp;
 	int cplen, l;
 
-	cp = (char *) of_get_property(device, "compatible", &cplen);
+	cp = of_get_property(device, "compatible", &cplen);
 	if (cp == NULL)
 		return 0;
 	while (cplen > 0) {
@@ -150,13 +151,14 @@ struct device_node *of_find_compatible_node(struct device_node *from,
 }
 EXPORT_SYMBOL(of_find_compatible_node);
 
-struct property *of_find_property(struct device_node *np, const char *name,
+struct property *of_find_property(const struct device_node *np,
+				  const char *name,
 				  int *lenp)
 {
 	struct property *pp;
 
 	for (pp = np->properties; pp != 0; pp = pp->next) {
-		if (strcmp(pp->name, name) == 0) {
+		if (strcasecmp(pp->name, name) == 0) {
 			if (lenp != 0)
 				*lenp = pp->length;
 			break;
@@ -170,7 +172,8 @@ EXPORT_SYMBOL(of_find_property);
  * Find a property with a given name for a given node
  * and return the value.
  */
-void *of_get_property(struct device_node *np, const char *name, int *lenp)
+const void *of_get_property(const struct device_node *np, const char *name,
+			    int *lenp)
 {
 	struct property *pp = of_find_property(np,name,lenp);
 	return pp ? pp->value : NULL;
@@ -192,7 +195,7 @@ EXPORT_SYMBOL(of_getintprop_default);
 
 int of_n_addr_cells(struct device_node *np)
 {
-	int* ip;
+	const int* ip;
 	do {
 		if (np->parent)
 			np = np->parent;
@@ -207,7 +210,7 @@ EXPORT_SYMBOL(of_n_addr_cells);
 
 int of_n_size_cells(struct device_node *np)
 {
-	int* ip;
+	const int* ip;
 	do {
 		if (np->parent)
 			np = np->parent;
@@ -239,7 +242,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 	while (*prevp) {
 		struct property *prop = *prevp;
 
-		if (!strcmp(prop->name, name)) {
+		if (!strcasecmp(prop->name, name)) {
 			void *old_val = prop->value;
 			int ret;
 
diff --git a/arch/sparc/kernel/sys_sunos.c b/arch/sparc/kernel/sys_sunos.c
index da6606f0cffc..f807172cab0e 100644
--- a/arch/sparc/kernel/sys_sunos.c
+++ b/arch/sparc/kernel/sys_sunos.c
@@ -910,7 +910,7 @@ asmlinkage long sunos_sysconf (int name)
 		ret = ARG_MAX;
 		break;
 	case _SC_CHILD_MAX:
-		ret = -1; /* no limit */
+		ret = current->signal->rlim[RLIMIT_NPROC].rlim_cur;
 		break;
 	case _SC_CLK_TCK:
 		ret = HZ;
@@ -919,7 +919,7 @@ asmlinkage long sunos_sysconf (int name)
 		ret = NGROUPS_MAX;
 		break;
 	case _SC_OPEN_MAX:
-		ret = OPEN_MAX;
+		ret = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
 		break;
 	case _SC_JOB_CONTROL:
 		ret = 1;	/* yes, we do support job control */
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index ea75ca569052..3a69778c8366 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -78,7 +78,8 @@ sys_call_table:
 /*285*/	.long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*290*/	.long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 /*295*/	.long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
-/*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages
+/*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
+/*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 
 #ifdef CONFIG_SUNOS_EMUL
 	/* Now the SunOS syscall table. */
@@ -192,5 +193,8 @@ sunos_sys_table:
 	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys
 /*300*/	.long sunos_nosys, sunos_nosys, sunos_nosys
+	.long sunos_nosys, sunos_nosys, sunos_nosys
+	.long sunos_nosys, sunos_nosys, sunos_nosys
+	.long sunos_nosys
 
 #endif
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 9bb1240aaf8a..f1401b57ccc7 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -301,7 +301,7 @@ static __inline__ void sun4_clock_probe(void)
 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->node;
-	char *model = of_get_property(dp, "model", NULL);
+	const char *model = of_get_property(dp, "model", NULL);
 
 	if (!model)
 		return -ENODEV;
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 6a70d215fd04..527687afc1c4 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -259,7 +259,7 @@ void do_fpd_trap(struct pt_regs *regs, unsigned long pc, unsigned long npc,
 	} else {
 		fpload(&current->thread.float_regs[0], &current->thread.fsr);
 	}
-	current_thread_info()->flags |= _TIF_USEDFPU;
+	set_thread_flag(TIF_USEDFPU);
 #endif
 }
 
@@ -290,7 +290,7 @@ void do_fpe_trap(struct pt_regs *regs, unsigned long pc, unsigned long npc,
 #ifndef CONFIG_SMP
 	if(!fpt) {
 #else
-        if(!(task_thread_info(fpt)->flags & _TIF_USEDFPU)) {
+	if (!test_tsk_thread_flag(fpt, TIF_USEDFPU)) {
 #endif
 		fpsave(&fake_regs[0], &fake_fsr, &fake_queue[0], &fake_depth);
 		regs->psr &= ~PSR_EF;
@@ -333,7 +333,7 @@ void do_fpe_trap(struct pt_regs *regs, unsigned long pc, unsigned long npc,
 	/* nope, better SIGFPE the offending process... */
 	       
 #ifdef CONFIG_SMP
-	task_thread_info(fpt)->flags &= ~_TIF_USEDFPU;
+	clear_tsk_thread_flag(fpt, TIF_USEDFPU);
 #endif
 	if(psr & PSR_PS) {
 		/* The first fsr store/load we tried trapped,
diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c
index 53ddcd9d1e60..559335f4917d 100644
--- a/arch/sparc/lib/atomic32.c
+++ b/arch/sparc/lib/atomic32.c
@@ -52,6 +52,7 @@ int atomic_cmpxchg(atomic_t *v, int old, int new)
 	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
 	return ret;
 }
+EXPORT_SYMBOL(atomic_cmpxchg);
 
 int atomic_add_unless(atomic_t *v, int a, int u)
 {
@@ -65,6 +66,7 @@ int atomic_add_unless(atomic_t *v, int a, int u)
 	spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
 	return ret != u;
 }
+EXPORT_SYMBOL(atomic_add_unless);
 
 /* Atomic operations are already serializing */
 void atomic_set(atomic_t *v, int i)
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index c85ddf312747..a532922e2e35 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -75,7 +75,7 @@ void show_mem(void)
 	printk("Free swap:       %6ldkB\n",
 	       nr_swap_pages << (PAGE_SHIFT-10));
 	printk("%ld pages of RAM\n", totalram_pages);
-	printk("%d free pages\n", nr_free_pages());
+	printk("%ld free pages\n", nr_free_pages());
 #if 0 /* undefined pgtable_cache_size, pgd_cache_size */
 	printk("%ld pages in page table cache\n",pgtable_cache_size);
 #ifndef CONFIG_SMP
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index f75a686ba644..590a41b864b9 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -19,6 +19,14 @@ config SPARC64
 	  SPARC64 ports; its web page is available at
 	  <http://www.ultralinux.org/>.
 
+config GENERIC_TIME
+	bool
+	default y
+
+config GENERIC_CLOCKEVENTS
+	bool
+	default y
+
 config 64BIT
 	def_bool y
 
@@ -34,10 +42,6 @@ config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TIME_INTERPOLATION
-	bool
-	default y
-
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 	default y
@@ -113,6 +117,8 @@ config GENERIC_HARDIRQS
 
 menu "General machine setup"
 
+source "kernel/time/Kconfig"
+
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
@@ -136,18 +142,6 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
-config PREEMPT
-	bool "Preemptible Kernel"
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-64)"
 	range 2 64
@@ -226,6 +220,7 @@ config ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
+	select SPARSEMEM_STATIC
 
 config LARGE_ALLOCS
 	def_bool y
@@ -399,6 +394,8 @@ config SCHED_SMT
 	  when dealing with UltraSPARC cpus at a cost of slightly increased
 	  overhead in some places. If unsure say N here.
 
+source "kernel/Kconfig.preempt"
+
 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"
 
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 0f44a6a6675f..120c9c33b7a6 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 11 23:47:40 2007
+# Linux kernel version: 2.6.21-rc4
+# Sat Mar 17 14:18:44 2007
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -41,6 +41,7 @@ CONFIG_LOCALVERSION=""
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -49,6 +50,7 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
@@ -107,7 +109,6 @@ CONFIG_GENERIC_HARDIRQS=y
 # General machine setup
 #
 # CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=m
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -164,6 +165,9 @@ CONFIG_BINFMT_ELF32=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_SOLARIS_EMUL=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -322,6 +326,7 @@ CONFIG_CONNECTOR=m
 #
 # Plug and Play support
 #
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -338,7 +343,6 @@ CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_CDROM_PKTCDVD_WCACHE=y
@@ -787,6 +791,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIS5595 is not set
@@ -833,6 +838,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -874,6 +880,11 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -887,16 +898,22 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB_DDC=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
+
+#
+# Frambuffer hardware drivers
+#
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_ASILIANT is not set
@@ -908,9 +925,11 @@ CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_MATROX is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
+# CONFIG_FB_RADEON_BACKLIGHT is not set
 # CONFIG_FB_RADEON_DEBUG is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
 # CONFIG_FB_SAVAGE is not set
 # CONFIG_FB_SIS is not set
 # CONFIG_FB_NEOMAGIC is not set
@@ -947,7 +966,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SUN_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1192,6 +1210,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1202,6 +1221,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1445,9 +1465,11 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1465,6 +1487,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
 # CONFIG_STACK_DEBUG is not set
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index e724c54af029..c65b2f9c98d8 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -32,7 +32,7 @@ static void central_probe_failure(int line)
 static void central_ranges_init(struct linux_central *central)
 {
 	struct device_node *dp = central->prom_node;
-	void *pval;
+	const void *pval;
 	int len;
 	
 	central->num_central_ranges = 0;
@@ -47,7 +47,7 @@ static void central_ranges_init(struct linux_central *central)
 static void fhc_ranges_init(struct linux_fhc *fhc)
 {
 	struct device_node *dp = fhc->prom_node;
-	void *pval;
+	const void *pval;
 	int len;
 	
 	fhc->num_fhc_ranges = 0;
@@ -119,7 +119,7 @@ static unsigned long prom_reg_to_paddr(struct linux_prom_registers *r)
 static void probe_other_fhcs(void)
 {
 	struct device_node *dp;
-	struct linux_prom64_registers *fpregs;
+	const struct linux_prom64_registers *fpregs;
 
 	for_each_node_by_name(dp, "fhc") {
 		struct linux_fhc *fhc;
@@ -190,7 +190,8 @@ static void probe_clock_board(struct linux_central *central,
 			      struct device_node *fp)
 {
 	struct device_node *dp;
-	struct linux_prom_registers cregs[3], *pr;
+	struct linux_prom_registers cregs[3];
+	const struct linux_prom_registers *pr;
 	int nslots, tmp, nregs;
 
 	dp = fp->child;
@@ -299,7 +300,8 @@ static void init_all_fhc_hw(void)
 
 void central_probe(void)
 {
-	struct linux_prom_registers fpregs[6], *pr;
+	struct linux_prom_registers fpregs[6];
+	const struct linux_prom_registers *pr;
 	struct linux_fhc *fhc;
 	struct device_node *dp, *fp;
 	int err;
diff --git a/arch/sparc64/kernel/chmc.c b/arch/sparc64/kernel/chmc.c
index 9699abeb9907..777d34577045 100644
--- a/arch/sparc64/kernel/chmc.c
+++ b/arch/sparc64/kernel/chmc.c
@@ -343,8 +343,8 @@ static int init_one_mctrl(struct device_node *dp)
 {
 	struct mctrl_info *mp = kzalloc(sizeof(*mp), GFP_KERNEL);
 	int portid = of_getintprop_default(dp, "portid", -1);
-	struct linux_prom64_registers *regs;
-	void *pval;
+	const struct linux_prom64_registers *regs;
+	const void *pval;
 	int len;
 
 	if (!mp)
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index 35bf895fdeee..0ace17bafba4 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -285,7 +285,7 @@ static void __init fill_ebus_child(struct device_node *dp,
 				   int non_standard_regs)
 {
 	struct of_device *op;
-	int *regs;
+	const int *regs;
 	int i, len;
 
 	dev->prom_node = dp;
@@ -438,11 +438,9 @@ static struct pci_dev *find_next_ebus(struct pci_dev *start, int *is_rio_p)
 
 void __init ebus_init(void)
 {
-	struct pci_pbm_info *pbm;
 	struct linux_ebus_device *dev;
 	struct linux_ebus *ebus;
 	struct pci_dev *pdev;
-	struct pcidev_cookie *cookie;
 	struct device_node *dp;
 	int is_rio;
 	int num_ebus = 0;
@@ -453,8 +451,7 @@ void __init ebus_init(void)
 		return;
 	}
 
-	cookie = pdev->sysdata;
-	dp = cookie->prom_node;
+	dp = pci_device_to_OF_node(pdev);
 
 	ebus_chain = ebus = ebus_alloc(sizeof(struct linux_ebus));
 	ebus->next = NULL;
@@ -480,8 +477,7 @@ void __init ebus_init(void)
 				break;
 			}
 			ebus->is_rio = is_rio;
-			cookie = pdev->sysdata;
-			dp = cookie->prom_node;
+			dp = pci_device_to_OF_node(pdev);
 			continue;
 		}
 		printk("ebus%d:", num_ebus);
@@ -489,7 +485,6 @@ void __init ebus_init(void)
 		ebus->index = num_ebus;
 		ebus->prom_node = dp;
 		ebus->self = pdev;
-		ebus->parent = pbm = cookie->pbm;
 
 		ebus->ofdev.node = dp;
 		ebus->ofdev.dev.parent = &pdev->dev;
@@ -531,8 +526,7 @@ void __init ebus_init(void)
 		if (!pdev)
 			break;
 
-		cookie = pdev->sysdata;
-		dp = cookie->prom_node;
+		dp = pci_device_to_OF_node(pdev);
 
 		ebus->next = ebus_alloc(sizeof(struct linux_ebus));
 		ebus = ebus->next;
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index b5ff3ee5ace1..6241e3dbbd57 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -109,6 +109,7 @@ static unsigned char virt_irq_alloc(unsigned int real_irq)
 	return ent;
 }
 
+#ifdef CONFIG_PCI_MSI
 static void virt_irq_free(unsigned int virt_irq)
 {
 	unsigned int real_irq;
@@ -121,6 +122,7 @@ static void virt_irq_free(unsigned int virt_irq)
 
 	__bucket(real_irq)->virt_irq = 0;
 }
+#endif
 
 static unsigned int virt_to_real_irq(unsigned char virt_irq)
 {
@@ -587,32 +589,6 @@ void ack_bad_irq(unsigned int virt_irq)
 	       ino, virt_irq);
 }
 
-#ifndef CONFIG_SMP
-extern irqreturn_t timer_interrupt(int, void *);
-
-void timer_irq(int irq, struct pt_regs *regs)
-{
-	unsigned long clr_mask = 1 << irq;
-	unsigned long tick_mask = tick_ops->softint_mask;
-	struct pt_regs *old_regs;
-
-	if (get_softint() & tick_mask) {
-		irq = 0;
-		clr_mask = tick_mask;
-	}
-	clear_softint(clr_mask);
-
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-
-	kstat_this_cpu.irqs[0]++;
-	timer_interrupt(irq, NULL);
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-#endif
-
 void handler_irq(int irq, struct pt_regs *regs)
 {
 	struct ino_bucket *bucket;
@@ -651,7 +627,7 @@ static u64 prom_limit0, prom_limit1;
 static void map_prom_timers(void)
 {
 	struct device_node *dp;
-	unsigned int *addr;
+	const unsigned int *addr;
 
 	/* PROM timer node hangs out in the top level of device siblings... */
 	dp = of_find_node_by_path("/");
diff --git a/arch/sparc64/kernel/isa.c b/arch/sparc64/kernel/isa.c
index 98721a8f8619..6a6882e57ff2 100644
--- a/arch/sparc64/kernel/isa.c
+++ b/arch/sparc64/kernel/isa.c
@@ -24,27 +24,9 @@ static void __init report_dev(struct sparc_isa_device *isa_dev, int child)
 
 static void __init isa_dev_get_resource(struct sparc_isa_device *isa_dev)
 {
-	struct linux_prom_registers *pregs;
-	unsigned long base, len;
-	int prop_len;
-
-	pregs = of_get_property(isa_dev->prom_node, "reg", &prop_len);
-	if (!pregs)
-		return;
-
-	/* Only the first one is interesting. */
-	len = pregs[0].reg_size;
-	base = (((unsigned long)pregs[0].which_io << 32) |
-		(unsigned long)pregs[0].phys_addr);
-	base += isa_dev->bus->parent->io_space.start;
-
-	isa_dev->resource.start = base;
-	isa_dev->resource.end   = (base + len - 1UL);
-	isa_dev->resource.flags = IORESOURCE_IO;
-	isa_dev->resource.name  = isa_dev->prom_node->name;
+	struct of_device *op = of_find_device_by_node(isa_dev->prom_node);
 
-	request_resource(&isa_dev->bus->parent->io_space,
-			 &isa_dev->resource);
+	memcpy(&isa_dev->resource, &op->resource[0], sizeof(struct resource));
 }
 
 static void __init isa_dev_get_irq(struct sparc_isa_device *isa_dev)
@@ -158,19 +140,10 @@ void __init isa_init(void)
 
 	pdev = NULL;
 	while ((pdev = pci_get_device(vendor, device, pdev)) != NULL) {
-		struct pcidev_cookie *pdev_cookie;
-		struct pci_pbm_info *pbm;
 		struct sparc_isa_bridge *isa_br;
 		struct device_node *dp;
 
-		pdev_cookie = pdev->sysdata;
-		if (!pdev_cookie) {
-			printk("ISA: Warning, ISA bridge ignored due to "
-			       "lack of OBP data.\n");
-			continue;
-		}
-		pbm = pdev_cookie->pbm;
-		dp = pdev_cookie->prom_node;
+		dp = pci_device_to_OF_node(pdev);
 
 		isa_br = kzalloc(sizeof(*isa_br), GFP_KERNEL);
 		if (!isa_br) {
@@ -195,10 +168,9 @@ void __init isa_init(void)
 		isa_br->next = isa_chain;
 		isa_chain = isa_br;
 
-		isa_br->parent = pbm;
 		isa_br->self = pdev;
 		isa_br->index = index++;
-		isa_br->prom_node = pdev_cookie->prom_node;
+		isa_br->prom_node = dp;
 
 		printk("isa%d:", isa_br->index);
 
diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S
index e492db845ea3..d4024ac0d619 100644
--- a/arch/sparc64/kernel/ktlb.S
+++ b/arch/sparc64/kernel/ktlb.S
@@ -138,9 +138,15 @@ kvmap_dtlb_4v:
 	brgez,pn	%g4, kvmap_dtlb_nonlinear
 	 nop
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	/* Index through the base page size TSB even for linear
+	 * mappings when using page allocation debugging.
+	 */
+	KERN_TSB_LOOKUP_TL1(%g4, %g6, %g5, %g1, %g2, %g3, kvmap_dtlb_load)
+#else
 	/* Correct TAG_TARGET is already in %g6, check 4mb TSB.  */
 	KERN_TSB4M_LOOKUP_TL1(%g6, %g5, %g1, %g2, %g3, kvmap_dtlb_load)
-
+#endif
 	/* TSB entry address left in %g1, lookup linear PTE.
 	 * Must preserve %g1 and %g6 (TAG).
 	 */
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index b0f3e0082a0d..9ac9a307999a 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -245,7 +245,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(u32 *addr);
+	unsigned int	(*get_flags)(const u32 *addr);
 };
 
 /*
@@ -305,7 +305,7 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(u32 *addr)
+static unsigned int of_bus_default_get_flags(const u32 *addr)
 {
 	return IORESOURCE_MEM;
 }
@@ -317,6 +317,11 @@ static unsigned int of_bus_default_get_flags(u32 *addr)
 static int of_bus_pci_match(struct device_node *np)
 {
 	if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+		const char *model = of_get_property(np, "model", NULL);
+
+		if (model && !strcmp(model, "SUNW,simba"))
+			return 0;
+
 		/* Do not do PCI specific frobbing if the
 		 * PCI bridge lacks a ranges property.  We
 		 * want to pass it through up to the next
@@ -332,6 +337,21 @@ static int of_bus_pci_match(struct device_node *np)
 	return 0;
 }
 
+static int of_bus_simba_match(struct device_node *np)
+{
+	const char *model = of_get_property(np, "model", NULL);
+
+	if (model && !strcmp(model, "SUNW,simba"))
+		return 1;
+	return 0;
+}
+
+static int of_bus_simba_map(u32 *addr, const u32 *range,
+			    int na, int ns, int pna)
+{
+	return 0;
+}
+
 static void of_bus_pci_count_cells(struct device_node *np,
 				   int *addrc, int *sizec)
 {
@@ -369,7 +389,7 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(u32 *addr)
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
 {
 	unsigned int flags = 0;
 	u32 w = addr[0];
@@ -436,6 +456,15 @@ static struct of_bus of_busses[] = {
 		.map = of_bus_pci_map,
 		.get_flags = of_bus_pci_get_flags,
 	},
+	/* SIMBA */
+	{
+		.name = "simba",
+		.addr_prop_name = "assigned-addresses",
+		.match = of_bus_simba_match,
+		.count_cells = of_bus_pci_count_cells,
+		.map = of_bus_simba_map,
+		.get_flags = of_bus_pci_get_flags,
+	},
 	/* SBUS */
 	{
 		.name = "sbus",
@@ -482,7 +511,7 @@ static int __init build_one_resource(struct device_node *parent,
 				     u32 *addr,
 				     int na, int ns, int pna)
 {
-	u32 *ranges;
+	const u32 *ranges;
 	unsigned int rlen;
 	int rone;
 
@@ -513,7 +542,7 @@ static int __init build_one_resource(struct device_node *parent,
 
 static int __init use_1to1_mapping(struct device_node *pp)
 {
-	char *model;
+	const char *model;
 
 	/* If this is on the PMU bus, don't try to translate it even
 	 * if a ranges property exists.
@@ -548,7 +577,7 @@ static void __init build_device_resources(struct of_device *op,
 	struct of_bus *bus;
 	int na, ns;
 	int index, num_reg;
-	void *preg;
+	const void *preg;
 
 	if (!parent)
 		return;
@@ -578,10 +607,10 @@ static void __init build_device_resources(struct of_device *op,
 	for (index = 0; index < num_reg; index++) {
 		struct resource *r = &op->resource[index];
 		u32 addr[OF_MAX_ADDR_CELLS];
-		u32 *reg = (preg + (index * ((na + ns) * 4)));
+		const u32 *reg = (preg + (index * ((na + ns) * 4)));
 		struct device_node *dp = op->node;
 		struct device_node *pp = p_op->node;
-		struct of_bus *pbus;
+		struct of_bus *pbus, *dbus;
 		u64 size, result = OF_BAD_ADDR;
 		unsigned long flags;
 		int dna, dns;
@@ -599,6 +628,7 @@ static void __init build_device_resources(struct of_device *op,
 
 		dna = na;
 		dns = ns;
+		dbus = bus;
 
 		while (1) {
 			dp = pp;
@@ -611,13 +641,13 @@ static void __init build_device_resources(struct of_device *op,
 			pbus = of_match_bus(pp);
 			pbus->count_cells(dp, &pna, &pns);
 
-			if (build_one_resource(dp, bus, pbus, addr,
+			if (build_one_resource(dp, dbus, pbus, addr,
 					       dna, dns, pna))
 				break;
 
 			dna = pna;
 			dns = pns;
-			bus = pbus;
+			dbus = pbus;
 		}
 
 	build_res:
@@ -635,9 +665,6 @@ static void __init build_device_resources(struct of_device *op,
 			r->start = result;
 			r->end = result + size - 1;
 			r->flags = flags;
-		} else {
-			r->start = ~0UL;
-			r->end = ~0UL;
 		}
 		r->name = op->node->name;
 	}
@@ -645,14 +672,14 @@ static void __init build_device_resources(struct of_device *op,
 
 static struct device_node * __init
 apply_interrupt_map(struct device_node *dp, struct device_node *pp,
-		    u32 *imap, int imlen, u32 *imask,
+		    const u32 *imap, int imlen, const u32 *imask,
 		    unsigned int *irq_p)
 {
 	struct device_node *cp;
 	unsigned int irq = *irq_p;
 	struct of_bus *bus;
 	phandle handle;
-	u32 *reg;
+	const u32 *reg;
 	int na, num_reg, i;
 
 	bus = of_match_bus(pp);
@@ -707,8 +734,8 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp,
 					   struct device_node *pp,
 					   unsigned int irq)
 {
-	struct linux_prom_pci_registers *regs;
-	unsigned int devfn, slot, ret;
+	const struct linux_prom_pci_registers *regs;
+	unsigned int bus, devfn, slot, ret;
 
 	if (irq < 1 || irq > 4)
 		return irq;
@@ -717,10 +744,40 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp,
 	if (!regs)
 		return irq;
 
+	bus = (regs->phys_hi >> 16) & 0xff;
 	devfn = (regs->phys_hi >> 8) & 0xff;
 	slot = (devfn >> 3) & 0x1f;
 
-	ret = ((irq - 1 + (slot & 3)) & 3) + 1;
+	if (pp->irq_trans) {
+		/* Derived from Table 8-3, U2P User's Manual.  This branch
+		 * is handling a PCI controller that lacks a proper set of
+		 * interrupt-map and interrupt-map-mask properties.  The
+		 * Ultra-E450 is one example.
+		 *
+		 * The bit layout is BSSLL, where:
+		 * B: 0 on bus A, 1 on bus B
+		 * D: 2-bit slot number, derived from PCI device number as
+		 *    (dev - 1) for bus A, or (dev - 2) for bus B
+		 * L: 2-bit line number
+		 */
+		if (bus & 0x80) {
+			/* PBM-A */
+			bus  = 0x00;
+			slot = (slot - 1) << 2;
+		} else {
+			/* PBM-B */
+			bus  = 0x10;
+			slot = (slot - 2) << 2;
+		}
+		irq -= 1;
+
+		ret = (bus | slot | irq);
+	} else {
+		/* Going through a PCI-PCI bridge that lacks a set of
+		 * interrupt-map and interrupt-map-mask properties.
+		 */
+		ret = ((irq - 1 + (slot & 3)) & 3) + 1;
+	}
 
 	return ret;
 }
@@ -760,7 +817,7 @@ static unsigned int __init build_one_device_irq(struct of_device *op,
 	pp = dp->parent;
 	ip = NULL;
 	while (pp) {
-		void *imap, *imsk;
+		const void *imap, *imsk;
 		int imlen;
 
 		imap = of_get_property(pp, "interrupt-map", &imlen);
@@ -825,7 +882,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 						 struct device *parent)
 {
 	struct of_device *op = kzalloc(sizeof(*op), GFP_KERNEL);
-	unsigned int *irq;
+	const unsigned int *irq;
 	int len, i;
 
 	if (!op)
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 6b740eb6fe7e..023af41ad68d 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -1,9 +1,11 @@
-/* $Id: pci.c,v 1.39 2002/01/05 01:13:43 davem Exp $
- * pci.c: UltraSparc PCI controller support.
+/* pci.c: UltraSparc PCI controller support.
  *
  * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@redhat.com)
  * Copyright (C) 1998, 1999 Eddie C. Dost   (ecd@skynet.be)
  * Copyright (C) 1999 Jakub Jelinek   (jj@ultra.linux.cz)
+ *
+ * OF tree based PCI bus probing taken from the PowerPC port
+ * with minor modifications, see there for credits.
  */
 
 #include <linux/module.h>
@@ -24,6 +26,9 @@
 #include <asm/ebus.h>
 #include <asm/isa.h>
 #include <asm/prom.h>
+#include <asm/apb.h>
+
+#include "pci_impl.h"
 
 unsigned long pci_memspace_mask = 0xffffffffUL;
 
@@ -277,10 +282,10 @@ int __init pcic_present(void)
 	return pci_controller_scan(pci_is_controller);
 }
 
-struct pci_iommu_ops *pci_iommu_ops;
+const struct pci_iommu_ops *pci_iommu_ops;
 EXPORT_SYMBOL(pci_iommu_ops);
 
-extern struct pci_iommu_ops pci_sun4u_iommu_ops,
+extern const struct pci_iommu_ops pci_sun4u_iommu_ops,
 	pci_sun4v_iommu_ops;
 
 /* Find each controller in the system, attach and initialize
@@ -300,6 +305,467 @@ static void __init pci_controller_probe(void)
 	pci_controller_scan(pci_controller_init);
 }
 
+static unsigned long pci_parse_of_flags(u32 addr0)
+{
+	unsigned long flags = 0;
+
+	if (addr0 & 0x02000000) {
+		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
+		if (addr0 & 0x40000000)
+			flags |= IORESOURCE_PREFETCH
+				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+	} else if (addr0 & 0x01000000)
+		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	return flags;
+}
+
+/* The of_device layer has translated all of the assigned-address properties
+ * into physical address resources, we only have to figure out the register
+ * mapping.
+ */
+static void pci_parse_of_addrs(struct of_device *op,
+			       struct device_node *node,
+			       struct pci_dev *dev)
+{
+	struct resource *op_res;
+	const u32 *addrs;
+	int proplen;
+
+	addrs = of_get_property(node, "assigned-addresses", &proplen);
+	if (!addrs)
+		return;
+	printk("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
+	op_res = &op->resource[0];
+	for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) {
+		struct resource *res;
+		unsigned long flags;
+		int i;
+
+		flags = pci_parse_of_flags(addrs[0]);
+		if (!flags)
+			continue;
+		i = addrs[0] & 0xff;
+		printk("  start: %lx, end: %lx, i: %x\n",
+		       op_res->start, op_res->end, i);
+
+		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
+			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
+		} else if (i == dev->rom_base_reg) {
+			res = &dev->resource[PCI_ROM_RESOURCE];
+			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+		} else {
+			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+			continue;
+		}
+		res->start = op_res->start;
+		res->end = op_res->end;
+		res->flags = flags;
+		res->name = pci_name(dev);
+	}
+}
+
+struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
+				  struct device_node *node,
+				  struct pci_bus *bus, int devfn,
+				  int host_controller)
+{
+	struct dev_archdata *sd;
+	struct pci_dev *dev;
+	const char *type;
+	u32 class;
+
+	dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	sd = &dev->dev.archdata;
+	sd->iommu = pbm->iommu;
+	sd->stc = &pbm->stc;
+	sd->host_controller = pbm;
+	sd->prom_node = node;
+	sd->op = of_find_device_by_node(node);
+	sd->msi_num = 0xffffffff;
+
+	type = of_get_property(node, "device_type", NULL);
+	if (type == NULL)
+		type = "";
+
+	printk("    create device, devfn: %x, type: %s hostcontroller(%d)\n",
+	       devfn, type, host_controller);
+
+	dev->bus = bus;
+	dev->sysdata = node;
+	dev->dev.parent = bus->bridge;
+	dev->dev.bus = &pci_bus_type;
+	dev->devfn = devfn;
+	dev->multifunction = 0;		/* maybe a lie? */
+
+	if (host_controller) {
+		dev->vendor = 0x108e;
+		dev->device = 0x8000;
+		dev->subsystem_vendor = 0x0000;
+		dev->subsystem_device = 0x0000;
+		dev->cfg_size = 256;
+		dev->class = PCI_CLASS_BRIDGE_HOST << 8;
+		sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+			0x00, PCI_SLOT(devfn), PCI_FUNC(devfn));
+	} else {
+		dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
+		dev->device = of_getintprop_default(node, "device-id", 0xffff);
+		dev->subsystem_vendor =
+			of_getintprop_default(node, "subsystem-vendor-id", 0);
+		dev->subsystem_device =
+			of_getintprop_default(node, "subsystem-id", 0);
+
+		dev->cfg_size = pci_cfg_space_size(dev);
+
+		/* We can't actually use the firmware value, we have
+		 * to read what is in the register right now.  One
+		 * reason is that in the case of IDE interfaces the
+		 * firmware can sample the value before the the IDE
+		 * interface is programmed into native mode.
+		 */
+		pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+		dev->class = class >> 8;
+
+		sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+			dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+	}
+	printk("    class: 0x%x device name: %s\n",
+	       dev->class, pci_name(dev));
+
+	dev->current_state = 4;		/* unknown power state */
+	dev->error_state = pci_channel_io_normal;
+
+	if (host_controller) {
+		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+		dev->rom_base_reg = PCI_ROM_ADDRESS1;
+		dev->irq = PCI_IRQ_NONE;
+	} else {
+		if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+			/* a PCI-PCI bridge */
+			dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+			dev->rom_base_reg = PCI_ROM_ADDRESS1;
+		} else if (!strcmp(type, "cardbus")) {
+			dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
+		} else {
+			dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+			dev->rom_base_reg = PCI_ROM_ADDRESS;
+
+			dev->irq = sd->op->irqs[0];
+			if (dev->irq == 0xffffffff)
+				dev->irq = PCI_IRQ_NONE;
+		}
+	}
+	pci_parse_of_addrs(sd->op, node, dev);
+
+	printk("    adding to system ...\n");
+
+	pci_device_add(dev, bus);
+
+	return dev;
+}
+
+static void __init apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p)
+{
+	u32 idx, first, last;
+
+	first = 8;
+	last = 0;
+	for (idx = 0; idx < 8; idx++) {
+		if ((map & (1 << idx)) != 0) {
+			if (first > idx)
+				first = idx;
+			if (last < idx)
+				last = idx;
+		}
+	}
+
+	*first_p = first;
+	*last_p = last;
+}
+
+static void __init pci_resource_adjust(struct resource *res,
+				       struct resource *root)
+{
+	res->start += root->start;
+	res->end += root->start;
+}
+
+/* Cook up fake bus resources for SUNW,simba PCI bridges which lack
+ * a proper 'ranges' property.
+ */
+static void __init apb_fake_ranges(struct pci_dev *dev,
+				   struct pci_bus *bus,
+				   struct pci_pbm_info *pbm)
+{
+	struct resource *res;
+	u32 first, last;
+	u8 map;
+
+	pci_read_config_byte(dev, APB_IO_ADDRESS_MAP, &map);
+	apb_calc_first_last(map, &first, &last);
+	res = bus->resource[0];
+	res->start = (first << 21);
+	res->end = (last << 21) + ((1 << 21) - 1);
+	res->flags = IORESOURCE_IO;
+	pci_resource_adjust(res, &pbm->io_space);
+
+	pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map);
+	apb_calc_first_last(map, &first, &last);
+	res = bus->resource[1];
+	res->start = (first << 21);
+	res->end = (last << 21) + ((1 << 21) - 1);
+	res->flags = IORESOURCE_MEM;
+	pci_resource_adjust(res, &pbm->mem_space);
+}
+
+static void __init pci_of_scan_bus(struct pci_pbm_info *pbm,
+				   struct device_node *node,
+				   struct pci_bus *bus);
+
+#define GET_64BIT(prop, i)	((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1])
+
+void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
+				  struct device_node *node,
+				  struct pci_dev *dev)
+{
+	struct pci_bus *bus;
+	const u32 *busrange, *ranges;
+	int len, i, simba;
+	struct resource *res;
+	unsigned int flags;
+	u64 size;
+
+	printk("of_scan_pci_bridge(%s)\n", node->full_name);
+
+	/* parse bus-range property */
+	busrange = of_get_property(node, "bus-range", &len);
+	if (busrange == NULL || len != 8) {
+		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+	ranges = of_get_property(node, "ranges", &len);
+	simba = 0;
+	if (ranges == NULL) {
+		const char *model = of_get_property(node, "model", NULL);
+		if (model && !strcmp(model, "SUNW,simba")) {
+			simba = 1;
+		} else {
+			printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
+			       node->full_name);
+			return;
+		}
+	}
+
+	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	if (!bus) {
+		printk(KERN_ERR "Failed to create pci bus for %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus->primary = dev->bus->number;
+	bus->subordinate = busrange[1];
+	bus->bridge_ctl = 0;
+
+	/* parse ranges property, or cook one up by hand for Simba */
+	/* PCI #address-cells == 3 and #size-cells == 2 always */
+	res = &dev->resource[PCI_BRIDGE_RESOURCES];
+	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
+		res->flags = 0;
+		bus->resource[i] = res;
+		++res;
+	}
+	if (simba) {
+		apb_fake_ranges(dev, bus, pbm);
+		goto simba_cont;
+	}
+	i = 1;
+	for (; len >= 32; len -= 32, ranges += 8) {
+		struct resource *root;
+
+		flags = pci_parse_of_flags(ranges[0]);
+		size = GET_64BIT(ranges, 6);
+		if (flags == 0 || size == 0)
+			continue;
+		if (flags & IORESOURCE_IO) {
+			res = bus->resource[0];
+			if (res->flags) {
+				printk(KERN_ERR "PCI: ignoring extra I/O range"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+			root = &pbm->io_space;
+		} else {
+			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
+				printk(KERN_ERR "PCI: too many memory ranges"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+			res = bus->resource[i];
+			++i;
+			root = &pbm->mem_space;
+		}
+
+		res->start = GET_64BIT(ranges, 1);
+		res->end = res->start + size - 1;
+		res->flags = flags;
+
+		/* Another way to implement this would be to add an of_device
+		 * layer routine that can calculate a resource for a given
+		 * range property value in a PCI device.
+		 */
+		pci_resource_adjust(res, root);
+	}
+simba_cont:
+	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
+		bus->number);
+	printk("    bus name: %s\n", bus->name);
+
+	pci_of_scan_bus(pbm, node, bus);
+}
+
+static void __init pci_of_scan_bus(struct pci_pbm_info *pbm,
+				   struct device_node *node,
+				   struct pci_bus *bus)
+{
+	struct device_node *child;
+	const u32 *reg;
+	int reglen, devfn;
+	struct pci_dev *dev;
+
+	printk("PCI: scan_bus[%s] bus no %d\n",
+	       node->full_name, bus->number);
+
+	child = NULL;
+	while ((child = of_get_next_child(node, child)) != NULL) {
+		printk("  * %s\n", child->full_name);
+		reg = of_get_property(child, "reg", &reglen);
+		if (reg == NULL || reglen < 20)
+			continue;
+		devfn = (reg[0] >> 8) & 0xff;
+
+		/* create a new pci_dev for this device */
+		dev = of_create_pci_dev(pbm, child, bus, devfn, 0);
+		if (!dev)
+			continue;
+		printk("PCI: dev header type: %x\n", dev->hdr_type);
+
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
+			of_scan_pci_bridge(pbm, child, dev);
+	}
+}
+
+static ssize_t
+show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * buf)
+{
+	struct pci_dev *pdev;
+	struct device_node *dp;
+
+	pdev = to_pci_dev(dev);
+	dp = pdev->dev.archdata.prom_node;
+
+	return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name);
+}
+
+static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL);
+
+static void __devinit pci_bus_register_of_sysfs(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+	int err;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		/* we don't really care if we can create this file or
+		 * not, but we need to assign the result of the call
+		 * or the world will fall under alien invasion and
+		 * everybody will be frozen on a spaceship ready to be
+		 * eaten on alpha centauri by some green and jelly
+		 * humanoid.
+		 */
+		err = sysfs_create_file(&dev->dev.kobj, &dev_attr_obppath.attr);
+	}
+	list_for_each_entry(child_bus, &bus->children, node)
+		pci_bus_register_of_sysfs(child_bus);
+}
+
+int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev,
+				 unsigned int devfn,
+				 int where, int size,
+				 u32 *value)
+{
+	static u8 fake_pci_config[] = {
+		0x8e, 0x10, /* Vendor: 0x108e (Sun) */
+		0x00, 0x80, /* Device: 0x8000 (PBM) */
+		0x46, 0x01, /* Command: 0x0146 (SERR, PARITY, MASTER, MEM) */
+		0xa0, 0x22, /* Status: 0x02a0 (DEVSEL_MED, FB2B, 66MHZ) */
+		0x00, 0x00, 0x00, 0x06, /* Class: 0x06000000 host bridge */
+		0x00, /* Cacheline: 0x00 */
+		0x40, /* Latency: 0x40 */
+		0x00, /* Header-Type: 0x00 normal */
+	};
+
+	*value = 0;
+	if (where >= 0 && where < sizeof(fake_pci_config) &&
+	    (where + size) >= 0 &&
+	    (where + size) < sizeof(fake_pci_config) &&
+	    size <= sizeof(u32)) {
+		while (size--) {
+			*value <<= 8;
+			*value |= fake_pci_config[where + size];
+		}
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
+				  unsigned int devfn,
+				  int where, int size,
+				  u32 value)
+{
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_bus * __init pci_scan_one_pbm(struct pci_pbm_info *pbm)
+{
+	struct pci_controller_info *p = pbm->parent;
+	struct device_node *node = pbm->prom_node;
+	struct pci_dev *host_pdev;
+	struct pci_bus *bus;
+
+	printk("PCI: Scanning PBM %s\n", node->full_name);
+
+	/* XXX parent device? XXX */
+	bus = pci_create_bus(NULL, pbm->pci_first_busno, p->pci_ops, pbm);
+	if (!bus) {
+		printk(KERN_ERR "Failed to create bus for %s\n",
+		       node->full_name);
+		return NULL;
+	}
+	bus->secondary = pbm->pci_first_busno;
+	bus->subordinate = pbm->pci_last_busno;
+
+	bus->resource[0] = &pbm->io_space;
+	bus->resource[1] = &pbm->mem_space;
+
+	/* Create the dummy host bridge and link it in.  */
+	host_pdev = of_create_pci_dev(pbm, node, bus, 0x00, 1);
+	bus->self = host_pdev;
+
+	pci_of_scan_bus(pbm, node, bus);
+	pci_bus_add_devices(bus);
+	pci_bus_register_of_sysfs(bus);
+
+	return bus;
+}
+
 static void __init pci_scan_each_controller_bus(void)
 {
 	struct pci_controller_info *p;
@@ -327,7 +793,7 @@ static int __init pcibios_init(void)
 
 subsys_initcall(pcibios_init);
 
-void pcibios_fixup_bus(struct pci_bus *pbus)
+void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
 {
 	struct pci_pbm_info *pbm = pbus->sysdata;
 
@@ -360,8 +826,33 @@ void pcibios_align_resource(void *data, struct resource *res,
 {
 }
 
-int pcibios_enable_device(struct pci_dev *pdev, int mask)
+int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
+	u16 cmd, oldcmd;
+	int i;
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	oldcmd = cmd;
+
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		struct resource *res = &dev->resource[i];
+
+		/* Only set up the requested stuff */
+		if (!(mask & (1<<i)))
+			continue;
+
+		if (res->flags & IORESOURCE_IO)
+			cmd |= PCI_COMMAND_IO;
+		if (res->flags & IORESOURCE_MEM)
+			cmd |= PCI_COMMAND_MEMORY;
+	}
+
+	if (cmd != oldcmd) {
+		printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
+		       pci_name(dev), cmd);
+                /* Enable the appropriate bits in the PCI command register.  */
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
 	return 0;
 }
 
@@ -380,7 +871,7 @@ void pcibios_resource_to_bus(struct pci_dev *pdev, struct pci_bus_region *region
 	else
 		root = &pbm->mem_space;
 
-	pbm->parent->resource_adjust(pdev, &zero_res, root);
+	pci_resource_adjust(&zero_res, root);
 
 	region->start = res->start - zero_res.start;
 	region->end = res->end - zero_res.start;
@@ -401,11 +892,11 @@ void pcibios_bus_to_resource(struct pci_dev *pdev, struct resource *res,
 	else
 		root = &pbm->mem_space;
 
-	pbm->parent->resource_adjust(pdev, res, root);
+	pci_resource_adjust(res, root);
 }
 EXPORT_SYMBOL(pcibios_bus_to_resource);
 
-char * __init pcibios_setup(char *str)
+char * __devinit pcibios_setup(char *str)
 {
 	return str;
 }
@@ -422,55 +913,17 @@ char * __init pcibios_setup(char *str)
 static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struct *vma,
 				      enum pci_mmap_state mmap_state)
 {
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm;
+	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	struct pci_controller_info *p;
 	unsigned long space_size, user_offset, user_size;
 
-	if (!pcp)
-		return -ENXIO;
-	pbm = pcp->pbm;
-	if (!pbm)
-		return -ENXIO;
-
 	p = pbm->parent;
-	if (p->pbms_same_domain) {
-		unsigned long lowest, highest;
-
-		lowest = ~0UL; highest = 0UL;
-		if (mmap_state == pci_mmap_io) {
-			if (p->pbm_A.io_space.flags) {
-				lowest = p->pbm_A.io_space.start;
-				highest = p->pbm_A.io_space.end + 1;
-			}
-			if (p->pbm_B.io_space.flags) {
-				if (lowest > p->pbm_B.io_space.start)
-					lowest = p->pbm_B.io_space.start;
-				if (highest < p->pbm_B.io_space.end + 1)
-					highest = p->pbm_B.io_space.end + 1;
-			}
-			space_size = highest - lowest;
-		} else {
-			if (p->pbm_A.mem_space.flags) {
-				lowest = p->pbm_A.mem_space.start;
-				highest = p->pbm_A.mem_space.end + 1;
-			}
-			if (p->pbm_B.mem_space.flags) {
-				if (lowest > p->pbm_B.mem_space.start)
-					lowest = p->pbm_B.mem_space.start;
-				if (highest < p->pbm_B.mem_space.end + 1)
-					highest = p->pbm_B.mem_space.end + 1;
-			}
-			space_size = highest - lowest;
-		}
+	if (mmap_state == pci_mmap_io) {
+		space_size = (pbm->io_space.end -
+			      pbm->io_space.start) + 1;
 	} else {
-		if (mmap_state == pci_mmap_io) {
-			space_size = (pbm->io_space.end -
-				      pbm->io_space.start) + 1;
-		} else {
-			space_size = (pbm->mem_space.end -
-				      pbm->mem_space.start) + 1;
-		}
+		space_size = (pbm->mem_space.end -
+			      pbm->mem_space.start) + 1;
 	}
 
 	/* Make sure the request is in range. */
@@ -481,31 +934,12 @@ static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struc
 	    (user_offset + user_size) > space_size)
 		return -EINVAL;
 
-	if (p->pbms_same_domain) {
-		unsigned long lowest = ~0UL;
-
-		if (mmap_state == pci_mmap_io) {
-			if (p->pbm_A.io_space.flags)
-				lowest = p->pbm_A.io_space.start;
-			if (p->pbm_B.io_space.flags &&
-			    lowest > p->pbm_B.io_space.start)
-				lowest = p->pbm_B.io_space.start;
-		} else {
-			if (p->pbm_A.mem_space.flags)
-				lowest = p->pbm_A.mem_space.start;
-			if (p->pbm_B.mem_space.flags &&
-			    lowest > p->pbm_B.mem_space.start)
-				lowest = p->pbm_B.mem_space.start;
-		}
-		vma->vm_pgoff = (lowest + user_offset) >> PAGE_SHIFT;
+	if (mmap_state == pci_mmap_io) {
+		vma->vm_pgoff = (pbm->io_space.start +
+				 user_offset) >> PAGE_SHIFT;
 	} else {
-		if (mmap_state == pci_mmap_io) {
-			vma->vm_pgoff = (pbm->io_space.start +
-					 user_offset) >> PAGE_SHIFT;
-		} else {
-			vma->vm_pgoff = (pbm->mem_space.start +
-					 user_offset) >> PAGE_SHIFT;
-		}
+		vma->vm_pgoff = (pbm->mem_space.start +
+				 user_offset) >> PAGE_SHIFT;
 	}
 
 	return 0;
@@ -639,9 +1073,8 @@ int pci_domain_nr(struct pci_bus *pbus)
 		struct pci_controller_info *p = pbm->parent;
 
 		ret = p->index;
-		if (p->pbms_same_domain == 0)
-			ret = ((ret << 1) +
-			       ((pbm == &pbm->parent->pbm_B) ? 1 : 0));
+		ret = ((ret << 1) +
+		       ((pbm == &pbm->parent->pbm_B) ? 1 : 0));
 	}
 
 	return ret;
@@ -651,8 +1084,7 @@ EXPORT_SYMBOL(pci_domain_nr);
 #ifdef CONFIG_PCI_MSI
 int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
+	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	struct pci_controller_info *p = pbm->parent;
 	int virt_irq, err;
 
@@ -668,10 +1100,9 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 
 void arch_teardown_msi_irq(unsigned int virt_irq)
 {
-	struct msi_desc *entry = get_irq_data(virt_irq);
+	struct msi_desc *entry = get_irq_msi(virt_irq);
 	struct pci_dev *pdev = entry->dev;
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
+	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	struct pci_controller_info *p = pbm->parent;
 
 	if (!pbm->msi_num || !p->setup_msi_irq)
@@ -681,4 +1112,10 @@ void arch_teardown_msi_irq(unsigned int virt_irq)
 }
 #endif /* !(CONFIG_PCI_MSI) */
 
+struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+	return pdev->dev.archdata.prom_node;
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
 #endif /* !(CONFIG_PCI) */
diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c
index 5a92cb90ebe0..1e6aeedf43c4 100644
--- a/arch/sparc64/kernel/pci_common.c
+++ b/arch/sparc64/kernel/pci_common.c
@@ -1,7 +1,6 @@
-/* $Id: pci_common.c,v 1.29 2002/02/01 00:56:03 davem Exp $
- * pci_common.c: PCI controller common support.
+/* pci_common.c: PCI controller common support.
  *
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/string.h>
@@ -16,748 +15,137 @@
 
 #include "pci_impl.h"
 
-/* Fix self device of BUS and hook it into BUS->self.
- * The pci_scan_bus does not do this for the host bridge.
- */
-void __init pci_fixup_host_bridge_self(struct pci_bus *pbus)
-{
-	struct pci_dev *pdev;
-
-	list_for_each_entry(pdev, &pbus->devices, bus_list) {
-		if (pdev->class >> 8 == PCI_CLASS_BRIDGE_HOST) {
-			pbus->self = pdev;
-			return;
-		}
-	}
-
-	prom_printf("PCI: Critical error, cannot find host bridge PDEV.\n");
-	prom_halt();
-}
-
-/* Find the OBP PROM device tree node for a PCI device.  */
-static struct device_node * __init
-find_device_prom_node(struct pci_pbm_info *pbm, struct pci_dev *pdev,
-		      struct device_node *bus_node,
-		      struct linux_prom_pci_registers **pregs,
-		      int *nregs)
+static void pci_register_legacy_regions(struct resource *io_res,
+					struct resource *mem_res)
 {
-	struct device_node *dp;
-
-	*nregs = 0;
-
-	/*
-	 * Return the PBM's PROM node in case we are it's PCI device,
-	 * as the PBM's reg property is different to standard PCI reg
-	 * properties. We would delete this device entry otherwise,
-	 * which confuses XFree86's device probing...
-	 */
-	if ((pdev->bus->number == pbm->pci_bus->number) && (pdev->devfn == 0) &&
-	    (pdev->vendor == PCI_VENDOR_ID_SUN) &&
-	    (pdev->device == PCI_DEVICE_ID_SUN_PBM ||
-	     pdev->device == PCI_DEVICE_ID_SUN_SCHIZO ||
-	     pdev->device == PCI_DEVICE_ID_SUN_TOMATILLO ||
-	     pdev->device == PCI_DEVICE_ID_SUN_SABRE ||
-	     pdev->device == PCI_DEVICE_ID_SUN_HUMMINGBIRD))
-		return bus_node;
-
-	dp = bus_node->child;
-	while (dp) {
-		struct linux_prom_pci_registers *regs;
-		struct property *prop;
-		int len;
-
-		prop = of_find_property(dp, "reg", &len);
-		if (!prop)
-			goto do_next_sibling;
-
-		regs = prop->value;
-		if (((regs[0].phys_hi >> 8) & 0xff) == pdev->devfn) {
-			*pregs = regs;
-			*nregs = len / sizeof(struct linux_prom_pci_registers);
-			return dp;
-		}
-
-	do_next_sibling:
-		dp = dp->sibling;
-	}
-
-	return NULL;
-}
+	struct resource *p;
 
-/* Older versions of OBP on PCI systems encode 64-bit MEM
- * space assignments incorrectly, this fixes them up.  We also
- * take the opportunity here to hide other kinds of bogus
- * assignments.
- */
-static void __init fixup_obp_assignments(struct pci_dev *pdev,
-					 struct pcidev_cookie *pcp)
-{
-	int i;
-
-	if (pdev->vendor == PCI_VENDOR_ID_AL &&
-	    (pdev->device == PCI_DEVICE_ID_AL_M7101 ||
-	     pdev->device == PCI_DEVICE_ID_AL_M1533)) {
-		int i;
-
-		/* Zap all of the normal resources, they are
-		 * meaningless and generate bogus resource collision
-		 * messages.  This is OpenBoot's ill-fated attempt to
-		 * represent the implicit resources that these devices
-		 * have.
-		 */
-		pcp->num_prom_assignments = 0;
-		for (i = 0; i < 6; i++) {
-			pdev->resource[i].start =
-				pdev->resource[i].end =
-				pdev->resource[i].flags = 0;
-		}
-		pdev->resource[PCI_ROM_RESOURCE].start =
-			pdev->resource[PCI_ROM_RESOURCE].end =
-			pdev->resource[PCI_ROM_RESOURCE].flags = 0;
+	/* VGA Video RAM. */
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
 		return;
-	}
-
-	for (i = 0; i < pcp->num_prom_assignments; i++) {
-		struct linux_prom_pci_registers *ap;
-		int space;
 
-		ap = &pcp->prom_assignments[i];
-		space = ap->phys_hi >> 24;
-		if ((space & 0x3) == 2 &&
-		    (space & 0x4) != 0) {
-			ap->phys_hi &= ~(0x7 << 24);
-			ap->phys_hi |= 0x3 << 24;
-		}
-	}
-}
-
-static ssize_t
-show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * buf)
-{
-	struct pci_dev *pdev;
-	struct pcidev_cookie *sysdata;
-
-	pdev = to_pci_dev(dev);
-	sysdata = pdev->sysdata;
-
-	return snprintf (buf, PAGE_SIZE, "%s\n", sysdata->prom_node->full_name);
-}
-
-static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL);
+	p->name = "Video RAM area";
+	p->start = mem_res->start + 0xa0000UL;
+	p->end = p->start + 0x1ffffUL;
+	p->flags = IORESOURCE_BUSY;
+	request_resource(mem_res, p);
 
-/* Fill in the PCI device cookie sysdata for the given
- * PCI device.  This cookie is the means by which one
- * can get to OBP and PCI controller specific information
- * for a PCI device.
- */
-static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm,
-				      struct pci_dev *pdev,
-				      struct device_node *bus_node)
-{
-	struct linux_prom_pci_registers *pregs = NULL;
-	struct pcidev_cookie *pcp;
-	struct device_node *dp;
-	struct property *prop;
-	int nregs, len, err;
-
-	dp = find_device_prom_node(pbm, pdev, bus_node,
-				   &pregs, &nregs);
-	if (!dp) {
-		/* If it is not in the OBP device tree then
-		 * there must be a damn good reason for it.
-		 *
-		 * So what we do is delete the device from the
-		 * PCI device tree completely.  This scenario
-		 * is seen, for example, on CP1500 for the
-		 * second EBUS/HappyMeal pair if the external
-		 * connector for it is not present.
-		 */
-		pci_remove_bus_device(pdev);
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
 		return;
-	}
-
-	pcp = kzalloc(sizeof(*pcp), GFP_ATOMIC);
-	if (pcp == NULL) {
-		prom_printf("PCI_COOKIE: Fatal malloc error, aborting...\n");
-		prom_halt();
-	}
-	pcp->pbm = pbm;
-	pcp->prom_node = dp;
-	pcp->op = of_find_device_by_node(dp);
-	memcpy(pcp->prom_regs, pregs,
-	       nregs * sizeof(struct linux_prom_pci_registers));
-	pcp->num_prom_regs = nregs;
-
-	/* We can't have the pcidev_cookie assignments be just
-	 * direct pointers into the property value, since they
-	 * are potentially modified by the probing process.
-	 */
-	prop = of_find_property(dp, "assigned-addresses", &len);
-	if (!prop) {
-		pcp->num_prom_assignments = 0;
-	} else {
-		memcpy(pcp->prom_assignments, prop->value, len);
-		pcp->num_prom_assignments =
-			(len / sizeof(pcp->prom_assignments[0]));
-	}
-
-	if (strcmp(dp->name, "ebus") == 0) {
-		struct linux_prom_ebus_ranges *erng;
-		int iter;
-
-		/* EBUS is special... */
-		prop = of_find_property(dp, "ranges", &len);
-		if (!prop) {
-			prom_printf("EBUS: Fatal error, no range property\n");
-			prom_halt();
-		}
-		erng = prop->value;
-		len = (len / sizeof(erng[0]));
-		for (iter = 0; iter < len; iter++) {
-			struct linux_prom_ebus_ranges *ep = &erng[iter];
-			struct linux_prom_pci_registers *ap;
-
-			ap = &pcp->prom_assignments[iter];
-
-			ap->phys_hi = ep->parent_phys_hi;
-			ap->phys_mid = ep->parent_phys_mid;
-			ap->phys_lo = ep->parent_phys_lo;
-			ap->size_hi = 0;
-			ap->size_lo = ep->size;
-		}
-		pcp->num_prom_assignments = len;
-	}
-
-	fixup_obp_assignments(pdev, pcp);
-
-	pdev->sysdata = pcp;
-
-	/* we don't really care if we can create this file or not,
-	 * but we need to assign the result of the call or the world will fall
-	 * under alien invasion and everybody will be frozen on a spaceship
-	 * ready to be eaten on alpha centauri by some green and jelly humanoid.
-	 */
-	err = sysfs_create_file(&pdev->dev.kobj, &dev_attr_obppath.attr);
-}
-
-void __init pci_fill_in_pbm_cookies(struct pci_bus *pbus,
-				    struct pci_pbm_info *pbm,
-				    struct device_node *dp)
-{
-	struct pci_dev *pdev, *pdev_next;
-	struct pci_bus *this_pbus, *pbus_next;
-
-	/* This must be _safe because the cookie fillin
-	   routine can delete devices from the tree.  */
-	list_for_each_entry_safe(pdev, pdev_next, &pbus->devices, bus_list)
-		pdev_cookie_fillin(pbm, pdev, dp);
-
-	list_for_each_entry_safe(this_pbus, pbus_next, &pbus->children, node) {
-		struct pcidev_cookie *pcp = this_pbus->self->sysdata;
-
-		pci_fill_in_pbm_cookies(this_pbus, pbm, pcp->prom_node);
-	}
-}
 
-static void __init bad_assignment(struct pci_dev *pdev,
-				  struct linux_prom_pci_registers *ap,
-				  struct resource *res,
-				  int do_prom_halt)
-{
-	prom_printf("PCI: Bogus PROM assignment. BUS[%02x] DEVFN[%x]\n",
-		    pdev->bus->number, pdev->devfn);
-	if (ap)
-		prom_printf("PCI: phys[%08x:%08x:%08x] size[%08x:%08x]\n",
-			    ap->phys_hi, ap->phys_mid, ap->phys_lo,
-			    ap->size_hi, ap->size_lo);
-	if (res)
-		prom_printf("PCI: RES[%016lx-->%016lx:(%lx)]\n",
-			    res->start, res->end, res->flags);
-	if (do_prom_halt)
-		prom_halt();
-}
-
-static struct resource *
-__init get_root_resource(struct linux_prom_pci_registers *ap,
-			 struct pci_pbm_info *pbm)
-{
-	int space = (ap->phys_hi >> 24) & 3;
-
-	switch (space) {
-	case 0:
-		/* Configuration space, silently ignore it. */
-		return NULL;
-
-	case 1:
-		/* 16-bit IO space */
-		return &pbm->io_space;
-
-	case 2:
-		/* 32-bit MEM space */
-		return &pbm->mem_space;
-
-	case 3:
-		/* 64-bit MEM space, these are allocated out of
-		 * the 32-bit mem_space range for the PBM, ie.
-		 * we just zero out the upper 32-bits.
-		 */
-		return &pbm->mem_space;
-
-	default:
-		printk("PCI: What is resource space %x?\n", space);
-		return NULL;
-	};
-}
-
-static struct resource *
-__init get_device_resource(struct linux_prom_pci_registers *ap,
-			   struct pci_dev *pdev)
-{
-	struct resource *res;
-	int breg = (ap->phys_hi & 0xff);
-
-	switch (breg) {
-	case  PCI_ROM_ADDRESS:
-		/* Unfortunately I have seen several cases where
-		 * buggy FCODE uses a space value of '1' (I/O space)
-		 * in the register property for the ROM address
-		 * so disable this sanity check for now.
-		 */
-#if 0
-	{
-		int space = (ap->phys_hi >> 24) & 3;
-
-		/* It had better be MEM space. */
-		if (space != 2)
-			bad_assignment(pdev, ap, NULL, 0);
-	}
-#endif
-		res = &pdev->resource[PCI_ROM_RESOURCE];
-		break;
-
-	case PCI_BASE_ADDRESS_0:
-	case PCI_BASE_ADDRESS_1:
-	case PCI_BASE_ADDRESS_2:
-	case PCI_BASE_ADDRESS_3:
-	case PCI_BASE_ADDRESS_4:
-	case PCI_BASE_ADDRESS_5:
-		res = &pdev->resource[(breg - PCI_BASE_ADDRESS_0) / 4];
-		break;
-
-	default:
-		bad_assignment(pdev, ap, NULL, 0);
-		res = NULL;
-		break;
-	};
-
-	return res;
-}
-
-static void __init pdev_record_assignments(struct pci_pbm_info *pbm,
-					   struct pci_dev *pdev)
-{
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	int i;
-
-	for (i = 0; i < pcp->num_prom_assignments; i++) {
-		struct linux_prom_pci_registers *ap;
-		struct resource *root, *res;
-
-		/* The format of this property is specified in
-		 * the PCI Bus Binding to IEEE1275-1994.
-		 */
-		ap = &pcp->prom_assignments[i];
-		root = get_root_resource(ap, pbm);
-		res = get_device_resource(ap, pdev);
-		if (root == NULL || res == NULL ||
-		    res->flags == 0)
-			continue;
-
-		/* Ok we know which resource this PROM assignment is
-		 * for, sanity check it.
-		 */
-		if ((res->start & 0xffffffffUL) != ap->phys_lo)
-			bad_assignment(pdev, ap, res, 1);
-
-		/* If it is a 64-bit MEM space assignment, verify that
-		 * the resource is too and that the upper 32-bits match.
-		 */
-		if (((ap->phys_hi >> 24) & 3) == 3) {
-			if (((res->flags & IORESOURCE_MEM) == 0) ||
-			    ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
-			     != PCI_BASE_ADDRESS_MEM_TYPE_64))
-				bad_assignment(pdev, ap, res, 1);
-			if ((res->start >> 32) != ap->phys_mid)
-				bad_assignment(pdev, ap, res, 1);
-
-			/* PBM cannot generate cpu initiated PIOs
-			 * to the full 64-bit space.  Therefore the
-			 * upper 32-bits better be zero.  If it is
-			 * not, just skip it and we will assign it
-			 * properly ourselves.
-			 */
-			if ((res->start >> 32) != 0UL) {
-				printk(KERN_ERR "PCI: OBP assigns out of range MEM address "
-				       "%016lx for region %ld on device %s\n",
-				       res->start, (res - &pdev->resource[0]), pci_name(pdev));
-				continue;
-			}
-		}
-
-		/* Adjust the resource into the physical address space
-		 * of this PBM.
-		 */
-		pbm->parent->resource_adjust(pdev, res, root);
-
-		if (request_resource(root, res) < 0) {
-			int rnum;
-
-			/* OK, there is some conflict.  But this is fine
-			 * since we'll reassign it in the fixup pass.
-			 *
-			 * Do not print the warning for ROM resources
-			 * as such a conflict is quite common and
-			 * harmless as the ROM bar is disabled.
-			 */
-			rnum = (res - &pdev->resource[0]);
-			if (rnum != PCI_ROM_RESOURCE)
-				printk(KERN_ERR "PCI: Resource collision, "
-				       "region %d "
-				       "[%016lx:%016lx] of device %s\n",
-				       rnum,
-				       res->start, res->end,
-				       pci_name(pdev));
-		}
-	}
-}
-
-void __init pci_record_assignments(struct pci_pbm_info *pbm,
-				   struct pci_bus *pbus)
-{
-	struct pci_dev *dev;
-	struct pci_bus *bus;
+	p->name = "System ROM";
+	p->start = mem_res->start + 0xf0000UL;
+	p->end = p->start + 0xffffUL;
+	p->flags = IORESOURCE_BUSY;
+	request_resource(mem_res, p);
 
-	list_for_each_entry(dev, &pbus->devices, bus_list)
-		pdev_record_assignments(pbm, dev);
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return;
 
-	list_for_each_entry(bus, &pbus->children, node)
-		pci_record_assignments(pbm, bus);
+	p->name = "Video ROM";
+	p->start = mem_res->start + 0xc0000UL;
+	p->end = p->start + 0x7fffUL;
+	p->flags = IORESOURCE_BUSY;
+	request_resource(mem_res, p);
 }
 
-/* Return non-zero if PDEV has implicit I/O resources even
- * though it may not have an I/O base address register
- * active.
- */
-static int __init has_implicit_io(struct pci_dev *pdev)
+static void pci_register_iommu_region(struct pci_pbm_info *pbm)
 {
-	int class = pdev->class >> 8;
+	const u32 *vdma = of_get_property(pbm->prom_node, "virtual-dma", NULL);
 
-	if (class == PCI_CLASS_NOT_DEFINED ||
-	    class == PCI_CLASS_NOT_DEFINED_VGA ||
-	    class == PCI_CLASS_STORAGE_IDE ||
-	    (pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
-		return 1;
+	if (vdma) {
+		struct resource *rp = kmalloc(sizeof(*rp), GFP_KERNEL);
 
-	return 0;
-}
-
-static void __init pdev_assign_unassigned(struct pci_pbm_info *pbm,
-					  struct pci_dev *pdev)
-{
-	u32 reg;
-	u16 cmd;
-	int i, io_seen, mem_seen;
-
-	io_seen = mem_seen = 0;
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *root, *res;
-		unsigned long size, min, max, align;
-
-		res = &pdev->resource[i];
-
-		if (res->flags & IORESOURCE_IO)
-			io_seen++;
-		else if (res->flags & IORESOURCE_MEM)
-			mem_seen++;
-
-		/* If it is already assigned or the resource does
-		 * not exist, there is nothing to do.
-		 */
-		if (res->parent != NULL || res->flags == 0UL)
-			continue;
-
-		/* Determine the root we allocate from. */
-		if (res->flags & IORESOURCE_IO) {
-			root = &pbm->io_space;
-			min = root->start + 0x400UL;
-			max = root->end;
-		} else {
-			root = &pbm->mem_space;
-			min = root->start;
-			max = min + 0x80000000UL;
-		}
-
-		size = res->end - res->start;
-		align = size + 1;
-		if (allocate_resource(root, res, size + 1, min, max, align, NULL, NULL) < 0) {
-			/* uh oh */
-			prom_printf("PCI: Failed to allocate resource %d for %s\n",
-				    i, pci_name(pdev));
+		if (!rp) {
+			prom_printf("Cannot allocate IOMMU resource.\n");
 			prom_halt();
 		}
-
-		/* Update PCI config space. */
-		pbm->parent->base_address_update(pdev, i);
-	}
-
-	/* Special case, disable the ROM.  Several devices
-	 * act funny (ie. do not respond to memory space writes)
-	 * when it is left enabled.  A good example are Qlogic,ISP
-	 * adapters.
-	 */
-	pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &reg);
-	reg &= ~PCI_ROM_ADDRESS_ENABLE;
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS, reg);
-
-	/* If we saw I/O or MEM resources, enable appropriate
-	 * bits in PCI command register.
-	 */
-	if (io_seen || mem_seen) {
-		pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-		if (io_seen || has_implicit_io(pdev))
-			cmd |= PCI_COMMAND_IO;
-		if (mem_seen)
-			cmd |= PCI_COMMAND_MEMORY;
-		pci_write_config_word(pdev, PCI_COMMAND, cmd);
-	}
-
-	/* If this is a PCI bridge or an IDE controller,
-	 * enable bus mastering.  In the former case also
-	 * set the cache line size correctly.
-	 */
-	if (((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) ||
-	    (((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) &&
-	     ((pdev->class & 0x80) != 0))) {
-		pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-		cmd |= PCI_COMMAND_MASTER;
-		pci_write_config_word(pdev, PCI_COMMAND, cmd);
-
-		if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI)
-			pci_write_config_byte(pdev,
-					      PCI_CACHE_LINE_SIZE,
-					      (64 / sizeof(u32)));
+		rp->name = "IOMMU";
+		rp->start = pbm->mem_space.start + (unsigned long) vdma[0];
+		rp->end = rp->start + (unsigned long) vdma[1] - 1UL;
+		rp->flags = IORESOURCE_BUSY;
+		request_resource(&pbm->mem_space, rp);
 	}
 }
 
-void __init pci_assign_unassigned(struct pci_pbm_info *pbm,
-				  struct pci_bus *pbus)
+void pci_determine_mem_io_space(struct pci_pbm_info *pbm)
 {
-	struct pci_dev *dev;
-	struct pci_bus *bus;
-
-	list_for_each_entry(dev, &pbus->devices, bus_list)
-		pdev_assign_unassigned(pbm, dev);
+	const struct linux_prom_pci_ranges *pbm_ranges;
+	int i, saw_mem, saw_io;
+	int num_pbm_ranges;
 
-	list_for_each_entry(bus, &pbus->children, node)
-		pci_assign_unassigned(pbm, bus);
-}
+	saw_mem = saw_io = 0;
+	pbm_ranges = of_get_property(pbm->prom_node, "ranges", &i);
+	num_pbm_ranges = i / sizeof(*pbm_ranges);
 
-static void __init pdev_fixup_irq(struct pci_dev *pdev)
-{
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct of_device *op = pcp->op;
+	for (i = 0; i < num_pbm_ranges; i++) {
+		const struct linux_prom_pci_ranges *pr = &pbm_ranges[i];
+		unsigned long a;
+		u32 parent_phys_hi, parent_phys_lo;
+		int type;
 
-	if (op->irqs[0] == 0xffffffff) {
-		pdev->irq = PCI_IRQ_NONE;
-		return;
-	}
+		parent_phys_hi = pr->parent_phys_hi;
+		parent_phys_lo = pr->parent_phys_lo;
+		if (tlb_type == hypervisor)
+			parent_phys_hi &= 0x0fffffff;
 
-	pdev->irq = op->irqs[0];
+		type = (pr->child_phys_hi >> 24) & 0x3;
+		a = (((unsigned long)parent_phys_hi << 32UL) |
+		     ((unsigned long)parent_phys_lo  <<  0UL));
 
-	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE,
-			      pdev->irq & PCI_IRQ_INO);
-}
-
-void __init pci_fixup_irq(struct pci_pbm_info *pbm,
-			  struct pci_bus *pbus)
-{
-	struct pci_dev *dev;
-	struct pci_bus *bus;
-
-	list_for_each_entry(dev, &pbus->devices, bus_list)
-		pdev_fixup_irq(dev);
-
-	list_for_each_entry(bus, &pbus->children, node)
-		pci_fixup_irq(pbm, bus);
-}
-
-static void pdev_setup_busmastering(struct pci_dev *pdev, int is_66mhz)
-{
-	u16 cmd;
-	u8 hdr_type, min_gnt, ltimer;
-
-	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-	cmd |= PCI_COMMAND_MASTER;
-	pci_write_config_word(pdev, PCI_COMMAND, cmd);
-
-	/* Read it back, if the mastering bit did not
-	 * get set, the device does not support bus
-	 * mastering so we have nothing to do here.
-	 */
-	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-	if ((cmd & PCI_COMMAND_MASTER) == 0)
-		return;
-
-	/* Set correct cache line size, 64-byte on all
-	 * Sparc64 PCI systems.  Note that the value is
-	 * measured in 32-bit words.
-	 */
-	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
-			      64 / sizeof(u32));
-
-	pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr_type);
-	hdr_type &= ~0x80;
-	if (hdr_type != PCI_HEADER_TYPE_NORMAL)
-		return;
-
-	/* If the latency timer is already programmed with a non-zero
-	 * value, assume whoever set it (OBP or whoever) knows what
-	 * they are doing.
-	 */
-	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &ltimer);
-	if (ltimer != 0)
-		return;
-
-	/* XXX Since I'm tipping off the min grant value to
-	 * XXX choose a suitable latency timer value, I also
-	 * XXX considered making use of the max latency value
-	 * XXX as well.  Unfortunately I've seen too many bogusly
-	 * XXX low settings for it to the point where it lacks
-	 * XXX any usefulness.  In one case, an ethernet card
-	 * XXX claimed a min grant of 10 and a max latency of 5.
-	 * XXX Now, if I had two such cards on the same bus I
-	 * XXX could not set the desired burst period (calculated
-	 * XXX from min grant) without violating the max latency
-	 * XXX bound.  Duh...
-	 * XXX
-	 * XXX I blame dumb PC bios implementors for stuff like
-	 * XXX this, most of them don't even try to do something
-	 * XXX sensible with latency timer values and just set some
-	 * XXX default value (usually 32) into every device.
-	 */
-
-	pci_read_config_byte(pdev, PCI_MIN_GNT, &min_gnt);
-
-	if (min_gnt == 0) {
-		/* If no min_gnt setting then use a default
-		 * value.
-		 */
-		if (is_66mhz)
-			ltimer = 16;
-		else
-			ltimer = 32;
-	} else {
-		int shift_factor;
-
-		if (is_66mhz)
-			shift_factor = 2;
-		else
-			shift_factor = 3;
-
-		/* Use a default value when the min_gnt value
-		 * is erroneously high.
-		 */
-		if (((unsigned int) min_gnt << shift_factor) > 512 ||
-		    ((min_gnt << shift_factor) & 0xff) == 0) {
-			ltimer = 8 << shift_factor;
-		} else {
-			ltimer = min_gnt << shift_factor;
-		}
-	}
+		switch (type) {
+		case 0:
+			/* PCI config space, 16MB */
+			pbm->config_space = a;
+			break;
 
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, ltimer);
-}
+		case 1:
+			/* 16-bit IO space, 16MB */
+			pbm->io_space.start = a;
+			pbm->io_space.end = a + ((16UL*1024UL*1024UL) - 1UL);
+			pbm->io_space.flags = IORESOURCE_IO;
+			saw_io = 1;
+			break;
 
-void pci_determine_66mhz_disposition(struct pci_pbm_info *pbm,
-				     struct pci_bus *pbus)
-{
-	struct pci_dev *pdev;
-	int all_are_66mhz;
-	u16 status;
+		case 2:
+			/* 32-bit MEM space, 2GB */
+			pbm->mem_space.start = a;
+			pbm->mem_space.end = a + (0x80000000UL - 1UL);
+			pbm->mem_space.flags = IORESOURCE_MEM;
+			saw_mem = 1;
+			break;
 
-	if (pbm->is_66mhz_capable == 0) {
-		all_are_66mhz = 0;
-		goto out;
-	}
+		case 3:
+			/* XXX 64-bit MEM handling XXX */
 
-	all_are_66mhz = 1;
-	list_for_each_entry(pdev, &pbus->devices, bus_list) {
-		pci_read_config_word(pdev, PCI_STATUS, &status);
-		if (!(status & PCI_STATUS_66MHZ)) {
-			all_are_66mhz = 0;
+		default:
 			break;
-		}
+		};
 	}
-out:
-	pbm->all_devs_66mhz = all_are_66mhz;
-
-	printk("PCI%d(PBM%c): Bus running at %dMHz\n",
-	       pbm->parent->index,
-	       (pbm == &pbm->parent->pbm_A) ? 'A' : 'B',
-	       (all_are_66mhz ? 66 : 33));
-}
-
-void pci_setup_busmastering(struct pci_pbm_info *pbm,
-			    struct pci_bus *pbus)
-{
-	struct pci_dev *dev;
-	struct pci_bus *bus;
-	int is_66mhz;
-
-	is_66mhz = pbm->is_66mhz_capable && pbm->all_devs_66mhz;
-
-	list_for_each_entry(dev, &pbus->devices, bus_list)
-		pdev_setup_busmastering(dev, is_66mhz);
-
-	list_for_each_entry(bus, &pbus->children, node)
-		pci_setup_busmastering(pbm, bus);
-}
-
-void pci_register_legacy_regions(struct resource *io_res,
-				 struct resource *mem_res)
-{
-	struct resource *p;
-
-	/* VGA Video RAM. */
-	p = kzalloc(sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return;
 
-	p->name = "Video RAM area";
-	p->start = mem_res->start + 0xa0000UL;
-	p->end = p->start + 0x1ffffUL;
-	p->flags = IORESOURCE_BUSY;
-	request_resource(mem_res, p);
+	if (!saw_io || !saw_mem) {
+		prom_printf("%s: Fatal error, missing %s PBM range.\n",
+			    pbm->name,
+			    (!saw_io ? "IO" : "MEM"));
+		prom_halt();
+	}
 
-	p = kzalloc(sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return;
+	printk("%s: PCI IO[%lx] MEM[%lx]\n",
+	       pbm->name,
+	       pbm->io_space.start,
+	       pbm->mem_space.start);
 
-	p->name = "System ROM";
-	p->start = mem_res->start + 0xf0000UL;
-	p->end = p->start + 0xffffUL;
-	p->flags = IORESOURCE_BUSY;
-	request_resource(mem_res, p);
+	pbm->io_space.name = pbm->mem_space.name = pbm->name;
 
-	p = kzalloc(sizeof(*p), GFP_KERNEL);
-	if (!p)
-		return;
+	request_resource(&ioport_resource, &pbm->io_space);
+	request_resource(&iomem_resource, &pbm->mem_space);
 
-	p->name = "Video ROM";
-	p->start = mem_res->start + 0xc0000UL;
-	p->end = p->start + 0x7fffUL;
-	p->flags = IORESOURCE_BUSY;
-	request_resource(mem_res, p);
+	pci_register_legacy_regions(&pbm->io_space,
+				    &pbm->mem_space);
+	pci_register_iommu_region(pbm);
 }
 
 /* Generic helper routines for PCI error reporting. */
diff --git a/arch/sparc64/kernel/pci_impl.h b/arch/sparc64/kernel/pci_impl.h
index 971e2bea30b4..1208583fcb83 100644
--- a/arch/sparc64/kernel/pci_impl.h
+++ b/arch/sparc64/kernel/pci_impl.h
@@ -1,7 +1,6 @@
-/* $Id: pci_impl.h,v 1.9 2001/06/13 06:34:30 davem Exp $
- * pci_impl.h: Helper definitions for PCI controller support.
+/* pci_impl.h: Helper definitions for PCI controller support.
  *
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net)
  */
 
 #ifndef PCI_IMPL_H
@@ -13,26 +12,22 @@
 #include <asm/prom.h>
 
 extern struct pci_controller_info *pci_controller_root;
+extern unsigned long pci_memspace_mask;
 
 extern int pci_num_controllers;
 
 /* PCI bus scanning and fixup support. */
-extern void pci_fixup_host_bridge_self(struct pci_bus *pbus);
-extern void pci_fill_in_pbm_cookies(struct pci_bus *pbus,
-				    struct pci_pbm_info *pbm,
-				    struct device_node *prom_node);
-extern void pci_record_assignments(struct pci_pbm_info *pbm,
-				   struct pci_bus *pbus);
-extern void pci_assign_unassigned(struct pci_pbm_info *pbm,
-				  struct pci_bus *pbus);
-extern void pci_fixup_irq(struct pci_pbm_info *pbm,
-			  struct pci_bus *pbus);
-extern void pci_determine_66mhz_disposition(struct pci_pbm_info *pbm,
-					    struct pci_bus *pbus);
-extern void pci_setup_busmastering(struct pci_pbm_info *pbm,
-				   struct pci_bus *pbus);
-extern void pci_register_legacy_regions(struct resource *io_res,
-					struct resource *mem_res);
+extern struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm);
+extern void pci_determine_mem_io_space(struct pci_pbm_info *pbm);
+
+extern int pci_host_bridge_read_pci_cfg(struct pci_bus *bus_dev,
+					unsigned int devfn,
+					int where, int size,
+					u32 *value);
+extern int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
+					 unsigned int devfn,
+					 int where, int size,
+					 u32 value);
 
 /* Error reporting support. */
 extern void pci_scan_for_target_abort(struct pci_controller_info *, struct pci_pbm_info *, struct pci_bus *);
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 2e7f1427088a..66712772f494 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -1,7 +1,6 @@
-/* $Id: pci_iommu.c,v 1.17 2001/12/17 07:05:09 davem Exp $
- * pci_iommu.c: UltraSparc PCI controller IOM/STC support.
+/* pci_iommu.c: UltraSparc PCI controller IOM/STC support.
  *
- * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1999, 2007 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1999, 2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -36,7 +35,7 @@
 			       "i" (ASI_PHYS_BYPASS_EC_E))
 
 /* Must be invoked under the IOMMU lock. */
-static void __iommu_flushall(struct pci_iommu *iommu)
+static void __iommu_flushall(struct iommu *iommu)
 {
 	unsigned long tag;
 	int entry;
@@ -64,7 +63,7 @@ static void __iommu_flushall(struct pci_iommu *iommu)
 #define IOPTE_IS_DUMMY(iommu, iopte)	\
 	((iopte_val(*iopte) & IOPTE_PAGE) == (iommu)->dummy_page_pa)
 
-static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte)
+static inline void iopte_make_dummy(struct iommu *iommu, iopte_t *iopte)
 {
 	unsigned long val = iopte_val(*iopte);
 
@@ -75,9 +74,9 @@ static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte)
 }
 
 /* Based largely upon the ppc64 iommu allocator.  */
-static long pci_arena_alloc(struct pci_iommu *iommu, unsigned long npages)
+static long pci_arena_alloc(struct iommu *iommu, unsigned long npages)
 {
-	struct pci_iommu_arena *arena = &iommu->arena;
+	struct iommu_arena *arena = &iommu->arena;
 	unsigned long n, i, start, end, limit;
 	int pass;
 
@@ -116,7 +115,7 @@ again:
 	return n;
 }
 
-static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, unsigned long npages)
+static void pci_arena_free(struct iommu_arena *arena, unsigned long base, unsigned long npages)
 {
 	unsigned long i;
 
@@ -124,7 +123,7 @@ static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, un
 		__clear_bit(i, arena->map);
 }
 
-void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask)
+void pci_iommu_table_init(struct iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask)
 {
 	unsigned long i, tsbbase, order, sz, num_tsb_entries;
 
@@ -170,7 +169,7 @@ void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset,
 		iopte_make_dummy(iommu, &iommu->page_table[i]);
 }
 
-static inline iopte_t *alloc_npages(struct pci_iommu *iommu, unsigned long npages)
+static inline iopte_t *alloc_npages(struct iommu *iommu, unsigned long npages)
 {
 	long entry;
 
@@ -181,12 +180,12 @@ static inline iopte_t *alloc_npages(struct pci_iommu *iommu, unsigned long npage
 	return iommu->page_table + entry;
 }
 
-static inline void free_npages(struct pci_iommu *iommu, dma_addr_t base, unsigned long npages)
+static inline void free_npages(struct iommu *iommu, dma_addr_t base, unsigned long npages)
 {
 	pci_arena_free(&iommu->arena, base >> IO_PAGE_SHIFT, npages);
 }
 
-static int iommu_alloc_ctx(struct pci_iommu *iommu)
+static int iommu_alloc_ctx(struct iommu *iommu)
 {
 	int lowest = iommu->ctx_lowest_free;
 	int sz = IOMMU_NUM_CTXS - lowest;
@@ -205,7 +204,7 @@ static int iommu_alloc_ctx(struct pci_iommu *iommu)
 	return n;
 }
 
-static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
+static inline void iommu_free_ctx(struct iommu *iommu, int ctx)
 {
 	if (likely(ctx)) {
 		__clear_bit(ctx, iommu->ctx_bitmap);
@@ -220,8 +219,7 @@ static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
  */
 static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	iopte_t *iopte;
 	unsigned long flags, order, first_page;
 	void *ret;
@@ -237,8 +235,7 @@ static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 		return NULL;
 	memset((char *)first_page, 0, PAGE_SIZE << order);
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
+	iommu = pdev->dev.archdata.iommu;
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	iopte = alloc_npages(iommu, size >> IO_PAGE_SHIFT);
@@ -268,14 +265,12 @@ static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 /* Free and unmap a consistent DMA translation. */
 static void pci_4u_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	iopte_t *iopte;
 	unsigned long flags, order, npages;
 
 	npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT;
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
+	iommu = pdev->dev.archdata.iommu;
 	iopte = iommu->page_table +
 		((dvma - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
 
@@ -295,18 +290,16 @@ static void pci_4u_free_consistent(struct pci_dev *pdev, size_t size, void *cpu,
  */
 static dma_addr_t pci_4u_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
-	struct pci_strbuf *strbuf;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
 	iopte_t *base;
 	unsigned long flags, npages, oaddr;
 	unsigned long i, base_paddr, ctx;
 	u32 bus_addr, ret;
 	unsigned long iopte_protection;
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	strbuf = &pcp->pbm->stc;
+	iommu = pdev->dev.archdata.iommu;
+	strbuf = pdev->dev.archdata.stc;
 
 	if (unlikely(direction == PCI_DMA_NONE))
 		goto bad_no_ctx;
@@ -349,7 +342,7 @@ bad_no_ctx:
 	return PCI_DMA_ERROR_CODE;
 }
 
-static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction)
+static void pci_strbuf_flush(struct strbuf *strbuf, struct iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages, int direction)
 {
 	int limit;
 
@@ -416,9 +409,8 @@ do_flush_sync:
 /* Unmap a single streaming mode DMA translation. */
 static void pci_4u_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
-	struct pci_strbuf *strbuf;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
 	iopte_t *base;
 	unsigned long flags, npages, ctx, i;
 
@@ -428,9 +420,8 @@ static void pci_4u_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_
 		return;
 	}
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	strbuf = &pcp->pbm->stc;
+	iommu = pdev->dev.archdata.iommu;
+	strbuf = pdev->dev.archdata.stc;
 
 	npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
@@ -549,9 +540,8 @@ static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg,
  */
 static int pci_4u_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
-	struct pci_strbuf *strbuf;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
 	unsigned long flags, ctx, npages, iopte_protection;
 	iopte_t *base;
 	u32 dma_base;
@@ -570,9 +560,8 @@ static int pci_4u_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n
 		return 1;
 	}
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	strbuf = &pcp->pbm->stc;
+	iommu = pdev->dev.archdata.iommu;
+	strbuf = pdev->dev.archdata.stc;
 	
 	if (unlikely(direction == PCI_DMA_NONE))
 		goto bad_no_ctx;
@@ -636,9 +625,8 @@ bad_no_ctx:
 /* Unmap a set of streaming mode DMA translations. */
 static void pci_4u_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
-	struct pci_strbuf *strbuf;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
 	iopte_t *base;
 	unsigned long flags, ctx, i, npages;
 	u32 bus_addr;
@@ -648,9 +636,8 @@ static void pci_4u_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, in
 			WARN_ON(1);
 	}
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	strbuf = &pcp->pbm->stc;
+	iommu = pdev->dev.archdata.iommu;
+	strbuf = pdev->dev.archdata.stc;
 	
 	bus_addr = sglist->dma_address & IO_PAGE_MASK;
 
@@ -696,14 +683,12 @@ static void pci_4u_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, in
  */
 static void pci_4u_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
-	struct pci_strbuf *strbuf;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
 	unsigned long flags, ctx, npages;
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	strbuf = &pcp->pbm->stc;
+	iommu = pdev->dev.archdata.iommu;
+	strbuf = pdev->dev.archdata.stc;
 
 	if (!strbuf->strbuf_enabled)
 		return;
@@ -736,15 +721,13 @@ static void pci_4u_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_
  */
 static void pci_4u_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
-	struct pci_strbuf *strbuf;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
 	unsigned long flags, ctx, npages, i;
 	u32 bus_addr;
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	strbuf = &pcp->pbm->stc;
+	iommu = pdev->dev.archdata.iommu;
+	strbuf = pdev->dev.archdata.stc;
 
 	if (!strbuf->strbuf_enabled)
 		return;
@@ -775,7 +758,7 @@ static void pci_4u_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-struct pci_iommu_ops pci_sun4u_iommu_ops = {
+const struct pci_iommu_ops pci_sun4u_iommu_ops = {
 	.alloc_consistent		= pci_4u_alloc_consistent,
 	.free_consistent		= pci_4u_free_consistent,
 	.map_single			= pci_4u_map_single,
@@ -809,13 +792,12 @@ static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
 
 int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
 {
-	struct pcidev_cookie *pcp = pdev->sysdata;
 	u64 dma_addr_mask;
 
 	if (pdev == NULL) {
 		dma_addr_mask = 0xffffffff;
 	} else {
-		struct pci_iommu *iommu = pcp->pbm->iommu;
+		struct iommu *iommu = pdev->dev.archdata.iommu;
 
 		dma_addr_mask = iommu->dma_addr_mask;
 
diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c
index fda5db223d96..253d40ec2245 100644
--- a/arch/sparc64/kernel/pci_psycho.c
+++ b/arch/sparc64/kernel/pci_psycho.c
@@ -1,7 +1,6 @@
-/* $Id: pci_psycho.c,v 1.33 2002/02/01 00:58:33 davem Exp $
- * pci_psycho.c: PSYCHO/U2P specific PCI controller support.
+/* pci_psycho.c: PSYCHO/U2P specific PCI controller support.
  *
- * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@caipfs.rutgers.edu)
+ * Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1998, 1999 Eddie C. Dost   (ecd@skynet.be)
  * Copyright (C) 1999 Jakub Jelinek   (jakub@redhat.com)
  */
@@ -119,6 +118,10 @@ static int psycho_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 	u16 tmp16;
 	u8 tmp8;
 
+	if (bus_dev == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
+						    size, value);
+
 	switch (size) {
 	case 1:
 		*value = 0xff;
@@ -172,6 +175,9 @@ static int psycho_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 	unsigned char bus = bus_dev->number;
 	u32 *addr;
 
+	if (bus_dev == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
+						     size, value);
 	addr = psycho_pci_config_mkaddr(pbm, bus, devfn, where);
 	if (!addr)
 		return PCIBIOS_SUCCESSFUL;
@@ -263,7 +269,7 @@ static void __psycho_check_one_stc(struct pci_controller_info *p,
 				   struct pci_pbm_info *pbm,
 				   int is_pbm_a)
 {
-	struct pci_strbuf *strbuf = &pbm->stc;
+	struct strbuf *strbuf = &pbm->stc;
 	unsigned long regbase = p->pbm_A.controller_regs;
 	unsigned long err_base, tag_base, line_base;
 	u64 control;
@@ -412,7 +418,7 @@ static void psycho_check_iommu_error(struct pci_controller_info *p,
 				     unsigned long afar,
 				     enum psycho_error_type type)
 {
-	struct pci_iommu *iommu = p->pbm_A.iommu;
+	struct iommu *iommu = p->pbm_A.iommu;
 	unsigned long iommu_tag[16];
 	unsigned long iommu_data[16];
 	unsigned long flags;
@@ -895,59 +901,6 @@ static void psycho_register_error_handlers(struct pci_controller_info *p)
 }
 
 /* PSYCHO boot time probing and initialization. */
-static void psycho_resource_adjust(struct pci_dev *pdev,
-				   struct resource *res,
-				   struct resource *root)
-{
-	res->start += root->start;
-	res->end += root->start;
-}
-
-static void psycho_base_address_update(struct pci_dev *pdev, int resource)
-{
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
-	struct resource *res, *root;
-	u32 reg;
-	int where, size, is_64bit;
-
-	res = &pdev->resource[resource];
-	if (resource < 6) {
-		where = PCI_BASE_ADDRESS_0 + (resource * 4);
-	} else if (resource == PCI_ROM_RESOURCE) {
-		where = pdev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	is_64bit = 0;
-	if (res->flags & IORESOURCE_IO)
-		root = &pbm->io_space;
-	else {
-		root = &pbm->mem_space;
-		if ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
-		    == PCI_BASE_ADDRESS_MEM_TYPE_64)
-			is_64bit = 1;
-	}
-
-	size = res->end - res->start;
-	pci_read_config_dword(pdev, where, &reg);
-	reg = ((reg & size) |
-	       (((u32)(res->start - root->start)) & ~size));
-	if (resource == PCI_ROM_RESOURCE) {
-		reg |= PCI_ROM_ADDRESS_ENABLE;
-		res->flags |= IORESOURCE_ROM_ENABLE;
-	}
-	pci_write_config_dword(pdev, where, reg);
-
-	/* This knows that the upper 32-bits of the address
-	 * must be zero.  Our PCI common layer enforces this.
-	 */
-	if (is_64bit)
-		pci_write_config_dword(pdev, where + 4, 0);
-}
-
 static void pbm_config_busmastering(struct pci_pbm_info *pbm)
 {
 	u8 *addr;
@@ -968,28 +921,7 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm)
 static void pbm_scan_bus(struct pci_controller_info *p,
 			 struct pci_pbm_info *pbm)
 {
-	struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL);
-
-	if (!cookie) {
-		prom_printf("PSYCHO: Critical allocation failure.\n");
-		prom_halt();
-	}
-
-	/* All we care about is the PBM. */
-	cookie->pbm = pbm;
-
-	pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno,
-				    p->pci_ops,
-				    pbm);
-	pci_fixup_host_bridge_self(pbm->pci_bus);
-	pbm->pci_bus->self->sysdata = cookie;
-
-	pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
-	pci_record_assignments(pbm, pbm->pci_bus);
-	pci_assign_unassigned(pbm, pbm->pci_bus);
-	pci_fixup_irq(pbm, pbm->pci_bus);
-	pci_determine_66mhz_disposition(pbm, pbm->pci_bus);
-	pci_setup_busmastering(pbm, pbm->pci_bus);
+	pbm->pci_bus = pci_scan_one_pbm(pbm);
 }
 
 static void psycho_scan_bus(struct pci_controller_info *p)
@@ -1009,7 +941,7 @@ static void psycho_scan_bus(struct pci_controller_info *p)
 
 static void psycho_iommu_init(struct pci_controller_info *p)
 {
-	struct pci_iommu *iommu = p->pbm_A.iommu;
+	struct iommu *iommu = p->pbm_A.iommu;
 	unsigned long i;
 	u64 control;
 
@@ -1094,19 +1026,6 @@ static void psycho_controller_hwinit(struct pci_controller_info *p)
 	psycho_write(p->pbm_A.controller_regs + PSYCHO_PCIB_DIAG, tmp);
 }
 
-static void pbm_register_toplevel_resources(struct pci_controller_info *p,
-					    struct pci_pbm_info *pbm)
-{
-	char *name = pbm->name;
-
-	pbm->io_space.name = pbm->mem_space.name = name;
-
-	request_resource(&ioport_resource, &pbm->io_space);
-	request_resource(&iomem_resource, &pbm->mem_space);
-	pci_register_legacy_regions(&pbm->io_space,
-				    &pbm->mem_space);
-}
-
 static void psycho_pbm_strbuf_init(struct pci_controller_info *p,
 				   struct pci_pbm_info *pbm,
 				   int is_pbm_a)
@@ -1172,19 +1091,11 @@ static void psycho_pbm_init(struct pci_controller_info *p,
 	unsigned int *busrange;
 	struct property *prop;
 	struct pci_pbm_info *pbm;
-	int len;
 
-	if (is_pbm_a) {
+	if (is_pbm_a)
 		pbm = &p->pbm_A;
-		pbm->pci_first_slot = 1;
-		pbm->io_space.start = pbm->controller_regs + PSYCHO_IOSPACE_A;
-		pbm->mem_space.start = pbm->controller_regs + PSYCHO_MEMSPACE_A;
-	} else {
+	else
 		pbm = &p->pbm_B;
-		pbm->pci_first_slot = 2;
-		pbm->io_space.start = pbm->controller_regs + PSYCHO_IOSPACE_B;
-		pbm->mem_space.start = pbm->controller_regs + PSYCHO_MEMSPACE_B;
-	}
 
 	pbm->chip_type = PBM_CHIP_TYPE_PSYCHO;
 	pbm->chip_version = 0;
@@ -1196,41 +1107,15 @@ static void psycho_pbm_init(struct pci_controller_info *p,
 	if (prop)
 		pbm->chip_revision = *(int *) prop->value;
 
-	pbm->io_space.end = pbm->io_space.start + PSYCHO_IOSPACE_SIZE;
-	pbm->io_space.flags = IORESOURCE_IO;
-	pbm->mem_space.end = pbm->mem_space.start + PSYCHO_MEMSPACE_SIZE;
-	pbm->mem_space.flags = IORESOURCE_MEM;
-
 	pbm->parent = p;
 	pbm->prom_node = dp;
 	pbm->name = dp->full_name;
 
-	pbm_register_toplevel_resources(p, pbm);
-
 	printk("%s: PSYCHO PCI Bus Module ver[%x:%x]\n",
 	       pbm->name,
 	       pbm->chip_version, pbm->chip_revision);
 
-	prop = of_find_property(dp, "ranges", &len);
-	if (prop) {
-		pbm->pbm_ranges = prop->value;
-		pbm->num_pbm_ranges =
-			(len / sizeof(struct linux_prom_pci_ranges));
-	} else {
-		pbm->num_pbm_ranges = 0;
-	}
-
-	prop = of_find_property(dp, "interrupt-map", &len);
-	if (prop) {
-		pbm->pbm_intmap = prop->value;
-		pbm->num_pbm_intmap =
-			(len / sizeof(struct linux_prom_pci_intmap));
-
-		prop = of_find_property(dp, "interrupt-map-mask", NULL);
-		pbm->pbm_intmask = prop->value;
-	} else {
-		pbm->num_pbm_intmap = 0;
-	}
+	pci_determine_mem_io_space(pbm);
 
 	prop = of_find_property(dp, "bus-range", NULL);
 	busrange = prop->value;
@@ -1246,7 +1131,7 @@ void psycho_init(struct device_node *dp, char *model_name)
 {
 	struct linux_prom64_registers *pr_regs;
 	struct pci_controller_info *p;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	struct property *prop;
 	u32 upa_portid;
 	int is_pbm_a;
@@ -1269,7 +1154,7 @@ void psycho_init(struct device_node *dp, char *model_name)
 		prom_printf("PSYCHO: Fatal memory allocation error.\n");
 		prom_halt();
 	}
-	iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
+	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
 	if (!iommu) {
 		prom_printf("PSYCHO: Fatal memory allocation error.\n");
 		prom_halt();
@@ -1282,10 +1167,7 @@ void psycho_init(struct device_node *dp, char *model_name)
 	p->pbm_A.portid = upa_portid;
 	p->pbm_B.portid = upa_portid;
 	p->index = pci_num_controllers++;
-	p->pbms_same_domain = 0;
 	p->scan_bus = psycho_scan_bus;
-	p->base_address_update = psycho_base_address_update;
-	p->resource_adjust = psycho_resource_adjust;
 	p->pci_ops = &psycho_ops;
 
 	prop = of_find_property(dp, "reg", NULL);
diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c
index 94bb681f2323..397862fbd9e1 100644
--- a/arch/sparc64/kernel/pci_sabre.c
+++ b/arch/sparc64/kernel/pci_sabre.c
@@ -1,7 +1,6 @@
-/* $Id: pci_sabre.c,v 1.42 2002/01/23 11:27:32 davem Exp $
- * pci_sabre.c: Sabre specific PCI controller support.
+/* pci_sabre.c: Sabre specific PCI controller support.
  *
- * Copyright (C) 1997, 1998, 1999 David S. Miller (davem@caipfs.rutgers.edu)
+ * Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1998, 1999 Eddie C. Dost   (ecd@skynet.be)
  * Copyright (C) 1999 Jakub Jelinek   (jakub@redhat.com)
  */
@@ -254,9 +253,6 @@ static int __sabre_out_of_range(struct pci_pbm_info *pbm,
 		return 0;
 
 	return ((pbm->parent == 0) ||
-		((pbm == &pbm->parent->pbm_B) &&
-		 (bus == pbm->pci_first_busno) &&
-		 PCI_SLOT(devfn) > 8) ||
 		((pbm == &pbm->parent->pbm_A) &&
 		 (bus == pbm->pci_first_busno) &&
 		 PCI_SLOT(devfn) > 8));
@@ -322,6 +318,12 @@ static int __sabre_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 static int sabre_read_pci_cfg(struct pci_bus *bus, unsigned int devfn,
 			      int where, int size, u32 *value)
 {
+	struct pci_pbm_info *pbm = bus->sysdata;
+
+	if (bus == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_read_pci_cfg(bus, devfn, where,
+						    size, value);
+
 	if (!bus->number && sabre_out_of_range(devfn)) {
 		switch (size) {
 		case 1:
@@ -438,6 +440,12 @@ static int __sabre_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 static int sabre_write_pci_cfg(struct pci_bus *bus, unsigned int devfn,
 			       int where, int size, u32 value)
 {
+	struct pci_pbm_info *pbm = bus->sysdata;
+
+	if (bus == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_write_pci_cfg(bus, devfn, where,
+						     size, value);
+
 	if (bus->number)
 		return __sabre_write_pci_cfg(bus, devfn, where, size, value);
 
@@ -490,7 +498,7 @@ static void sabre_check_iommu_error(struct pci_controller_info *p,
 				    unsigned long afsr,
 				    unsigned long afar)
 {
-	struct pci_iommu *iommu = p->pbm_A.iommu;
+	struct iommu *iommu = p->pbm_A.iommu;
 	unsigned long iommu_tag[16];
 	unsigned long iommu_data[16];
 	unsigned long flags;
@@ -710,8 +718,8 @@ static irqreturn_t sabre_pcierr_intr_other(struct pci_controller_info *p)
 			       p->index);
 		ret = IRQ_HANDLED;
 	}
-	pci_read_config_word(sabre_root_bus->self,
-			     PCI_STATUS, &stat);
+	pci_bus_read_config_word(sabre_root_bus, 0,
+				 PCI_STATUS, &stat);
 	if (stat & (PCI_STATUS_PARITY |
 		    PCI_STATUS_SIG_TARGET_ABORT |
 		    PCI_STATUS_REC_TARGET_ABORT |
@@ -719,8 +727,8 @@ static irqreturn_t sabre_pcierr_intr_other(struct pci_controller_info *p)
 		    PCI_STATUS_SIG_SYSTEM_ERROR)) {
 		printk("SABRE%d: PCI bus error, PCI_STATUS[%04x]\n",
 		       p->index, stat);
-		pci_write_config_word(sabre_root_bus->self,
-				      PCI_STATUS, 0xffff);
+		pci_bus_write_config_word(sabre_root_bus, 0,
+					  PCI_STATUS, 0xffff);
 		ret = IRQ_HANDLED;
 	}
 	return ret;
@@ -800,12 +808,10 @@ static irqreturn_t sabre_pcierr_intr(int irq, void *dev_id)
 	if (error_bits & (SABRE_PIOAFSR_PTA | SABRE_PIOAFSR_STA)) {
 		sabre_check_iommu_error(p, afsr, afar);
 		pci_scan_for_target_abort(p, &p->pbm_A, p->pbm_A.pci_bus);
-		pci_scan_for_target_abort(p, &p->pbm_B, p->pbm_B.pci_bus);
 	}
-	if (error_bits & (SABRE_PIOAFSR_PMA | SABRE_PIOAFSR_SMA)) {
+	if (error_bits & (SABRE_PIOAFSR_PMA | SABRE_PIOAFSR_SMA))
 		pci_scan_for_master_abort(p, &p->pbm_A, p->pbm_A.pci_bus);
-		pci_scan_for_master_abort(p, &p->pbm_B, p->pbm_B.pci_bus);
-	}
+
 	/* For excessive retries, SABRE/PBM will abort the device
 	 * and there is no way to specifically check for excessive
 	 * retries in the config space status registers.  So what
@@ -813,10 +819,8 @@ static irqreturn_t sabre_pcierr_intr(int irq, void *dev_id)
 	 * abort events.
 	 */
 
-	if (error_bits & (SABRE_PIOAFSR_PPERR | SABRE_PIOAFSR_SPERR)) {
+	if (error_bits & (SABRE_PIOAFSR_PPERR | SABRE_PIOAFSR_SPERR))
 		pci_scan_for_parity_error(p, &p->pbm_A, p->pbm_A.pci_bus);
-		pci_scan_for_parity_error(p, &p->pbm_B, p->pbm_B.pci_bus);
-	}
 
 	return IRQ_HANDLED;
 }
@@ -869,144 +873,52 @@ static void sabre_register_error_handlers(struct pci_controller_info *p)
 	sabre_write(base + SABRE_PCICTRL, tmp);
 }
 
-static void sabre_resource_adjust(struct pci_dev *pdev,
-				  struct resource *res,
-				  struct resource *root)
-{
-	struct pci_pbm_info *pbm = pdev->bus->sysdata;
-	unsigned long base;
-
-	if (res->flags & IORESOURCE_IO)
-		base = pbm->controller_regs + SABRE_IOSPACE;
-	else
-		base = pbm->controller_regs + SABRE_MEMSPACE;
-
-	res->start += base;
-	res->end += base;
-}
-
-static void sabre_base_address_update(struct pci_dev *pdev, int resource)
-{
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
-	struct resource *res;
-	unsigned long base;
-	u32 reg;
-	int where, size, is_64bit;
-
-	res = &pdev->resource[resource];
-	if (resource < 6) {
-		where = PCI_BASE_ADDRESS_0 + (resource * 4);
-	} else if (resource == PCI_ROM_RESOURCE) {
-		where = pdev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	is_64bit = 0;
-	if (res->flags & IORESOURCE_IO)
-		base = pbm->controller_regs + SABRE_IOSPACE;
-	else {
-		base = pbm->controller_regs + SABRE_MEMSPACE;
-		if ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
-		    == PCI_BASE_ADDRESS_MEM_TYPE_64)
-			is_64bit = 1;
-	}
-
-	size = res->end - res->start;
-	pci_read_config_dword(pdev, where, &reg);
-	reg = ((reg & size) |
-	       (((u32)(res->start - base)) & ~size));
-	if (resource == PCI_ROM_RESOURCE) {
-		reg |= PCI_ROM_ADDRESS_ENABLE;
-		res->flags |= IORESOURCE_ROM_ENABLE;
-	}
-	pci_write_config_dword(pdev, where, reg);
-
-	/* This knows that the upper 32-bits of the address
-	 * must be zero.  Our PCI common layer enforces this.
-	 */
-	if (is_64bit)
-		pci_write_config_dword(pdev, where + 4, 0);
-}
-
 static void apb_init(struct pci_controller_info *p, struct pci_bus *sabre_bus)
 {
 	struct pci_dev *pdev;
 
 	list_for_each_entry(pdev, &sabre_bus->devices, bus_list) {
-
 		if (pdev->vendor == PCI_VENDOR_ID_SUN &&
 		    pdev->device == PCI_DEVICE_ID_SUN_SIMBA) {
-			u32 word32;
 			u16 word16;
 
-			sabre_read_pci_cfg(pdev->bus, pdev->devfn,
-					   PCI_COMMAND, 2, &word32);
-			word16 = (u16) word32;
+			pci_read_config_word(pdev, PCI_COMMAND, &word16);
 			word16 |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
 				PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY |
 				PCI_COMMAND_IO;
-			word32 = (u32) word16;
-			sabre_write_pci_cfg(pdev->bus, pdev->devfn,
-					    PCI_COMMAND, 2, word32);
+			pci_write_config_word(pdev, PCI_COMMAND, word16);
 
 			/* Status register bits are "write 1 to clear". */
-			sabre_write_pci_cfg(pdev->bus, pdev->devfn,
-					    PCI_STATUS, 2, 0xffff);
-			sabre_write_pci_cfg(pdev->bus, pdev->devfn,
-					    PCI_SEC_STATUS, 2, 0xffff);
+			pci_write_config_word(pdev, PCI_STATUS, 0xffff);
+			pci_write_config_word(pdev, PCI_SEC_STATUS, 0xffff);
 
 			/* Use a primary/seconday latency timer value
 			 * of 64.
 			 */
-			sabre_write_pci_cfg(pdev->bus, pdev->devfn,
-					    PCI_LATENCY_TIMER, 1, 64);
-			sabre_write_pci_cfg(pdev->bus, pdev->devfn,
-					    PCI_SEC_LATENCY_TIMER, 1, 64);
+			pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+			pci_write_config_byte(pdev, PCI_SEC_LATENCY_TIMER, 64);
 
 			/* Enable reporting/forwarding of master aborts,
 			 * parity, and SERR.
 			 */
-			sabre_write_pci_cfg(pdev->bus, pdev->devfn,
-					    PCI_BRIDGE_CONTROL, 1,
-					    (PCI_BRIDGE_CTL_PARITY |
-					     PCI_BRIDGE_CTL_SERR |
-					     PCI_BRIDGE_CTL_MASTER_ABORT));
+			pci_write_config_byte(pdev, PCI_BRIDGE_CONTROL,
+					      (PCI_BRIDGE_CTL_PARITY |
+					       PCI_BRIDGE_CTL_SERR |
+					       PCI_BRIDGE_CTL_MASTER_ABORT));
 		}
 	}
 }
 
-static struct pcidev_cookie *alloc_bridge_cookie(struct pci_pbm_info *pbm)
-{
-	struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL);
-
-	if (!cookie) {
-		prom_printf("SABRE: Critical allocation failure.\n");
-		prom_halt();
-	}
-
-	/* All we care about is the PBM. */
-	cookie->pbm = pbm;
-
-	return cookie;
-}
-
 static void sabre_scan_bus(struct pci_controller_info *p)
 {
 	static int once;
-	struct pci_bus *sabre_bus, *pbus;
-	struct pci_pbm_info *pbm;
-	struct pcidev_cookie *cookie;
-	int sabres_scanned;
+	struct pci_bus *pbus;
 
 	/* The APB bridge speaks to the Sabre host PCI bridge
 	 * at 66Mhz, but the front side of APB runs at 33Mhz
 	 * for both segments.
 	 */
 	p->pbm_A.is_66mhz_capable = 0;
-	p->pbm_B.is_66mhz_capable = 0;
 
 	/* This driver has not been verified to handle
 	 * multiple SABREs yet, so trap this.
@@ -1020,56 +932,13 @@ static void sabre_scan_bus(struct pci_controller_info *p)
 	}
 	once++;
 
-	cookie = alloc_bridge_cookie(&p->pbm_A);
-
-	sabre_bus = pci_scan_bus(p->pci_first_busno,
-				 p->pci_ops,
-				 &p->pbm_A);
-	pci_fixup_host_bridge_self(sabre_bus);
-	sabre_bus->self->sysdata = cookie;
-
-	sabre_root_bus = sabre_bus;
-
-	apb_init(p, sabre_bus);
-
-	sabres_scanned = 0;
-
-	list_for_each_entry(pbus, &sabre_bus->children, node) {
-
-		if (pbus->number == p->pbm_A.pci_first_busno) {
-			pbm = &p->pbm_A;
-		} else if (pbus->number == p->pbm_B.pci_first_busno) {
-			pbm = &p->pbm_B;
-		} else
-			continue;
-
-		cookie = alloc_bridge_cookie(pbm);
-		pbus->self->sysdata = cookie;
-
-		sabres_scanned++;
+	pbus = pci_scan_one_pbm(&p->pbm_A);
+	if (!pbus)
+		return;
 
-		pbus->sysdata = pbm;
-		pbm->pci_bus = pbus;
-		pci_fill_in_pbm_cookies(pbus, pbm, pbm->prom_node);
-		pci_record_assignments(pbm, pbus);
-		pci_assign_unassigned(pbm, pbus);
-		pci_fixup_irq(pbm, pbus);
-		pci_determine_66mhz_disposition(pbm, pbus);
-		pci_setup_busmastering(pbm, pbus);
-	}
+	sabre_root_bus = pbus;
 
-	if (!sabres_scanned) {
-		/* Hummingbird, no APBs. */
-		pbm = &p->pbm_A;
-		sabre_bus->sysdata = pbm;
-		pbm->pci_bus = sabre_bus;
-		pci_fill_in_pbm_cookies(sabre_bus, pbm, pbm->prom_node);
-		pci_record_assignments(pbm, sabre_bus);
-		pci_assign_unassigned(pbm, sabre_bus);
-		pci_fixup_irq(pbm, sabre_bus);
-		pci_determine_66mhz_disposition(pbm, sabre_bus);
-		pci_setup_busmastering(pbm, sabre_bus);
-	}
+	apb_init(p, pbus);
 
 	sabre_register_error_handlers(p);
 }
@@ -1078,7 +947,7 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 			     int tsbsize, unsigned long dvma_offset,
 			     u32 dma_mask)
 {
-	struct pci_iommu *iommu = p->pbm_A.iommu;
+	struct iommu *iommu = p->pbm_A.iommu;
 	unsigned long i;
 	u64 control;
 
@@ -1126,224 +995,31 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL, control);
 }
 
-static void pbm_register_toplevel_resources(struct pci_controller_info *p,
-					    struct pci_pbm_info *pbm)
-{
-	char *name = pbm->name;
-	unsigned long ibase = p->pbm_A.controller_regs + SABRE_IOSPACE;
-	unsigned long mbase = p->pbm_A.controller_regs + SABRE_MEMSPACE;
-	unsigned int devfn;
-	unsigned long first, last, i;
-	u8 *addr, map;
-
-	sprintf(name, "SABRE%d PBM%c",
-		p->index,
-		(pbm == &p->pbm_A ? 'A' : 'B'));
-	pbm->io_space.name = pbm->mem_space.name = name;
-
-	devfn = PCI_DEVFN(1, (pbm == &p->pbm_A) ? 0 : 1);
-	addr = sabre_pci_config_mkaddr(pbm, 0, devfn, APB_IO_ADDRESS_MAP);
-	map = 0;
-	pci_config_read8(addr, &map);
-
-	first = 8;
-	last = 0;
-	for (i = 0; i < 8; i++) {
-		if ((map & (1 << i)) != 0) {
-			if (first > i)
-				first = i;
-			if (last < i)
-				last = i;
-		}
-	}
-	pbm->io_space.start = ibase + (first << 21UL);
-	pbm->io_space.end   = ibase + (last << 21UL) + ((1 << 21UL) - 1);
-	pbm->io_space.flags = IORESOURCE_IO;
-
-	addr = sabre_pci_config_mkaddr(pbm, 0, devfn, APB_MEM_ADDRESS_MAP);
-	map = 0;
-	pci_config_read8(addr, &map);
-
-	first = 8;
-	last = 0;
-	for (i = 0; i < 8; i++) {
-		if ((map & (1 << i)) != 0) {
-			if (first > i)
-				first = i;
-			if (last < i)
-				last = i;
-		}
-	}
-	pbm->mem_space.start = mbase + (first << 29UL);
-	pbm->mem_space.end   = mbase + (last << 29UL) + ((1 << 29UL) - 1);
-	pbm->mem_space.flags = IORESOURCE_MEM;
-
-	if (request_resource(&ioport_resource, &pbm->io_space) < 0) {
-		prom_printf("Cannot register PBM-%c's IO space.\n",
-			    (pbm == &p->pbm_A ? 'A' : 'B'));
-		prom_halt();
-	}
-	if (request_resource(&iomem_resource, &pbm->mem_space) < 0) {
-		prom_printf("Cannot register PBM-%c's MEM space.\n",
-			    (pbm == &p->pbm_A ? 'A' : 'B'));
-		prom_halt();
-	}
-
-	/* Register legacy regions if this PBM covers that area. */
-	if (pbm->io_space.start == ibase &&
-	    pbm->mem_space.start == mbase)
-		pci_register_legacy_regions(&pbm->io_space,
-					    &pbm->mem_space);
-}
-
-static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp, u32 dma_start, u32 dma_end)
+static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp)
 {
 	struct pci_pbm_info *pbm;
-	struct device_node *node;
-	struct property *prop;
-	u32 *busrange;
-	int len, simbas_found;
-
-	simbas_found = 0;
-	node = dp->child;
-	while (node != NULL) {
-		if (strcmp(node->name, "pci"))
-			goto next_pci;
-
-		prop = of_find_property(node, "model", NULL);
-		if (!prop || strncmp(prop->value, "SUNW,simba", prop->length))
-			goto next_pci;
-
-		simbas_found++;
-
-		prop = of_find_property(node, "bus-range", NULL);
-		busrange = prop->value;
-		if (busrange[0] == 1)
-			pbm = &p->pbm_B;
-		else
-			pbm = &p->pbm_A;
-
-		pbm->name = node->full_name;
-		printk("%s: SABRE PCI Bus Module\n", pbm->name);
-
-		pbm->chip_type = PBM_CHIP_TYPE_SABRE;
-		pbm->parent = p;
-		pbm->prom_node = node;
-		pbm->pci_first_slot = 1;
-		pbm->pci_first_busno = busrange[0];
-		pbm->pci_last_busno = busrange[1];
-
-		prop = of_find_property(node, "ranges", &len);
-		if (prop) {
-			pbm->pbm_ranges = prop->value;
-			pbm->num_pbm_ranges =
-				(len / sizeof(struct linux_prom_pci_ranges));
-		} else {
-			pbm->num_pbm_ranges = 0;
-		}
 
-		prop = of_find_property(node, "interrupt-map", &len);
-		if (prop) {
-			pbm->pbm_intmap = prop->value;
-			pbm->num_pbm_intmap =
-				(len / sizeof(struct linux_prom_pci_intmap));
-
-			prop = of_find_property(node, "interrupt-map-mask",
-						NULL);
-			pbm->pbm_intmask = prop->value;
-		} else {
-			pbm->num_pbm_intmap = 0;
-		}
+	pbm = &p->pbm_A;
+	pbm->name = dp->full_name;
+	printk("%s: SABRE PCI Bus Module\n", pbm->name);
 
-		pbm_register_toplevel_resources(p, pbm);
-
-	next_pci:
-		node = node->sibling;
-	}
-	if (simbas_found == 0) {
-		struct resource *rp;
+	pbm->chip_type = PBM_CHIP_TYPE_SABRE;
+	pbm->parent = p;
+	pbm->prom_node = dp;
+	pbm->pci_first_busno = p->pci_first_busno;
+	pbm->pci_last_busno = p->pci_last_busno;
 
-		/* No APBs underneath, probably this is a hummingbird
-		 * system.
-		 */
-		pbm = &p->pbm_A;
-		pbm->parent = p;
-		pbm->prom_node = dp;
-		pbm->pci_first_busno = p->pci_first_busno;
-		pbm->pci_last_busno = p->pci_last_busno;
-
-		prop = of_find_property(dp, "ranges", &len);
-		if (prop) {
-			pbm->pbm_ranges = prop->value;
-			pbm->num_pbm_ranges =
-				(len / sizeof(struct linux_prom_pci_ranges));
-		} else {
-			pbm->num_pbm_ranges = 0;
-		}
-
-		prop = of_find_property(dp, "interrupt-map", &len);
-		if (prop) {
-			pbm->pbm_intmap = prop->value;
-			pbm->num_pbm_intmap =
-				(len / sizeof(struct linux_prom_pci_intmap));
-
-			prop = of_find_property(dp, "interrupt-map-mask",
-						NULL);
-			pbm->pbm_intmask = prop->value;
-		} else {
-			pbm->num_pbm_intmap = 0;
-		}
-
-		pbm->name = dp->full_name;
-		printk("%s: SABRE PCI Bus Module\n", pbm->name);
-
-		pbm->io_space.name = pbm->mem_space.name = pbm->name;
-
-		/* Hack up top-level resources. */
-		pbm->io_space.start = p->pbm_A.controller_regs + SABRE_IOSPACE;
-		pbm->io_space.end   = pbm->io_space.start + (1UL << 24) - 1UL;
-		pbm->io_space.flags = IORESOURCE_IO;
-
-		pbm->mem_space.start =
-			(p->pbm_A.controller_regs + SABRE_MEMSPACE);
-		pbm->mem_space.end =
-			(pbm->mem_space.start + ((1UL << 32UL) - 1UL));
-		pbm->mem_space.flags = IORESOURCE_MEM;
-
-		if (request_resource(&ioport_resource, &pbm->io_space) < 0) {
-			prom_printf("Cannot register Hummingbird's IO space.\n");
-			prom_halt();
-		}
-		if (request_resource(&iomem_resource, &pbm->mem_space) < 0) {
-			prom_printf("Cannot register Hummingbird's MEM space.\n");
-			prom_halt();
-		}
-
-		rp = kmalloc(sizeof(*rp), GFP_KERNEL);
-		if (!rp) {
-			prom_printf("Cannot allocate IOMMU resource.\n");
-			prom_halt();
-		}
-		rp->name = "IOMMU";
-		rp->start = pbm->mem_space.start + (unsigned long) dma_start;
-		rp->end = pbm->mem_space.start + (unsigned long) dma_end - 1UL;
-		rp->flags = IORESOURCE_BUSY;
-		request_resource(&pbm->mem_space, rp);
-
-		pci_register_legacy_regions(&pbm->io_space,
-					    &pbm->mem_space);
-	}
+	pci_determine_mem_io_space(pbm);
 }
 
 void sabre_init(struct device_node *dp, char *model_name)
 {
-	struct linux_prom64_registers *pr_regs;
+	const struct linux_prom64_registers *pr_regs;
 	struct pci_controller_info *p;
-	struct pci_iommu *iommu;
-	struct property *prop;
+	struct iommu *iommu;
 	int tsbsize;
-	u32 *busrange;
-	u32 *vdma;
+	const u32 *busrange;
+	const u32 *vdma;
 	u32 upa_portid, dma_mask;
 	u64 clear_irq;
 
@@ -1351,13 +1027,9 @@ void sabre_init(struct device_node *dp, char *model_name)
 	if (!strcmp(model_name, "pci108e,a001"))
 		hummingbird_p = 1;
 	else if (!strcmp(model_name, "SUNW,sabre")) {
-		prop = of_find_property(dp, "compatible", NULL);
-		if (prop) {
-			const char *compat = prop->value;
-
-			if (!strcmp(compat, "pci108e,a001"))
-				hummingbird_p = 1;
-		}
+		const char *compat = of_get_property(dp, "compatible", NULL);
+		if (compat && !strcmp(compat, "pci108e,a001"))
+			hummingbird_p = 1;
 		if (!hummingbird_p) {
 			struct device_node *dp;
 
@@ -1381,37 +1053,28 @@ void sabre_init(struct device_node *dp, char *model_name)
 		prom_printf("SABRE: Error, kmalloc(pci_iommu) failed.\n");
 		prom_halt();
 	}
-	p->pbm_A.iommu = p->pbm_B.iommu = iommu;
+	p->pbm_A.iommu = iommu;
 
-	upa_portid = 0xff;
-	prop = of_find_property(dp, "upa-portid", NULL);
-	if (prop)
-		upa_portid = *(u32 *) prop->value;
+	upa_portid = of_getintprop_default(dp, "upa-portid", 0xff);
 
 	p->next = pci_controller_root;
 	pci_controller_root = p;
 
 	p->pbm_A.portid = upa_portid;
-	p->pbm_B.portid = upa_portid;
 	p->index = pci_num_controllers++;
-	p->pbms_same_domain = 1;
 	p->scan_bus = sabre_scan_bus;
-	p->base_address_update = sabre_base_address_update;
-	p->resource_adjust = sabre_resource_adjust;
 	p->pci_ops = &sabre_ops;
 
 	/*
 	 * Map in SABRE register set and report the presence of this SABRE.
 	 */
 	
-	prop = of_find_property(dp, "reg", NULL);
-	pr_regs = prop->value;
+	pr_regs = of_get_property(dp, "reg", NULL);
 
 	/*
 	 * First REG in property is base of entire SABRE register space.
 	 */
 	p->pbm_A.controller_regs = pr_regs[0].phys_addr;
-	p->pbm_B.controller_regs = pr_regs[0].phys_addr;
 
 	/* Clear interrupts */
 
@@ -1429,11 +1092,10 @@ void sabre_init(struct device_node *dp, char *model_name)
 		     SABRE_PCICTRL_ARBPARK | SABRE_PCICTRL_AEN));
 
 	/* Now map in PCI config space for entire SABRE. */
-	p->pbm_A.config_space = p->pbm_B.config_space =
+	p->pbm_A.config_space =
 		(p->pbm_A.controller_regs + SABRE_CONFIGSPACE);
 
-	prop = of_find_property(dp, "virtual-dma", NULL);
-	vdma = prop->value;
+	vdma = of_get_property(dp, "virtual-dma", NULL);
 
 	dma_mask = vdma[0];
 	switch(vdma[1]) {
@@ -1457,13 +1119,12 @@ void sabre_init(struct device_node *dp, char *model_name)
 
 	sabre_iommu_init(p, tsbsize, vdma[0], dma_mask);
 
-	prop = of_find_property(dp, "bus-range", NULL);
-	busrange = prop->value;
+	busrange = of_get_property(dp, "bus-range", NULL);
 	p->pci_first_busno = busrange[0];
 	p->pci_last_busno = busrange[1];
 
 	/*
 	 * Look for APB underneath.
 	 */
-	sabre_pbm_init(p, dp, vdma[0], vdma[0] + vdma[1]);
+	sabre_pbm_init(p, dp);
 }
diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c
index 66911b126aed..91a7385e5d32 100644
--- a/arch/sparc64/kernel/pci_schizo.c
+++ b/arch/sparc64/kernel/pci_schizo.c
@@ -1,7 +1,6 @@
-/* $Id: pci_schizo.c,v 1.24 2002/01/23 11:27:32 davem Exp $
- * pci_schizo.c: SCHIZO/TOMATILLO specific PCI controller support.
+/* pci_schizo.c: SCHIZO/TOMATILLO specific PCI controller support.
  *
- * Copyright (C) 2001, 2002, 2003 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2001, 2002, 2003, 2007 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kernel.h>
@@ -126,6 +125,9 @@ static int schizo_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 	u16 tmp16;
 	u8 tmp8;
 
+	if (bus_dev == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
+						    size, value);
 	switch (size) {
 	case 1:
 		*value = 0xff;
@@ -179,6 +181,9 @@ static int schizo_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 	unsigned char bus = bus_dev->number;
 	u32 *addr;
 
+	if (bus_dev == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
+						     size, value);
 	addr = schizo_pci_config_mkaddr(pbm, bus, devfn, where);
 	if (!addr)
 		return PCIBIOS_SUCCESSFUL;
@@ -274,7 +279,7 @@ struct pci_pbm_info *pbm_for_ino(struct pci_controller_info *p, u32 ino)
 static void __schizo_check_stc_error_pbm(struct pci_pbm_info *pbm,
 					 enum schizo_error_type type)
 {
-	struct pci_strbuf *strbuf = &pbm->stc;
+	struct strbuf *strbuf = &pbm->stc;
 	unsigned long regbase = pbm->pbm_regs;
 	unsigned long err_base, tag_base, line_base;
 	u64 control;
@@ -382,7 +387,7 @@ static void __schizo_check_stc_error_pbm(struct pci_pbm_info *pbm,
 static void schizo_check_iommu_error_pbm(struct pci_pbm_info *pbm,
 					 enum schizo_error_type type)
 {
-	struct pci_iommu *iommu = pbm->iommu;
+	struct iommu *iommu = pbm->iommu;
 	unsigned long iommu_tag[16];
 	unsigned long iommu_data[16];
 	unsigned long flags;
@@ -1229,42 +1234,8 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm)
 	pci_config_write8(addr, 64);
 }
 
-static void pbm_scan_bus(struct pci_controller_info *p,
-			 struct pci_pbm_info *pbm)
-{
-	struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL);
-
-	if (!cookie) {
-		prom_printf("%s: Critical allocation failure.\n", pbm->name);
-		prom_halt();
-	}
-
-	/* All we care about is the PBM. */
-	cookie->pbm = pbm;
-
-	pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno,
-				    p->pci_ops,
-				    pbm);
-	pci_fixup_host_bridge_self(pbm->pci_bus);
-	pbm->pci_bus->self->sysdata = cookie;
-
-	pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
-	pci_record_assignments(pbm, pbm->pci_bus);
-	pci_assign_unassigned(pbm, pbm->pci_bus);
-	pci_fixup_irq(pbm, pbm->pci_bus);
-	pci_determine_66mhz_disposition(pbm, pbm->pci_bus);
-	pci_setup_busmastering(pbm, pbm->pci_bus);
-}
-
-static void __schizo_scan_bus(struct pci_controller_info *p,
-			      int chip_type)
+static void schizo_scan_bus(struct pci_controller_info *p)
 {
-	if (!p->pbm_B.prom_node || !p->pbm_A.prom_node) {
-		printk("PCI: Only one PCI bus module of controller found.\n");
-		printk("PCI: Ignoring entire controller.\n");
-		return;
-	}
-
 	pbm_config_busmastering(&p->pbm_B);
 	p->pbm_B.is_66mhz_capable =
 		(of_find_property(p->pbm_B.prom_node, "66mhz-capable", NULL)
@@ -1273,154 +1244,19 @@ static void __schizo_scan_bus(struct pci_controller_info *p,
 	p->pbm_A.is_66mhz_capable =
 		(of_find_property(p->pbm_A.prom_node, "66mhz-capable", NULL)
 		 != NULL);
-	pbm_scan_bus(p, &p->pbm_B);
-	pbm_scan_bus(p, &p->pbm_A);
+
+	p->pbm_B.pci_bus = pci_scan_one_pbm(&p->pbm_B);
+	p->pbm_A.pci_bus = pci_scan_one_pbm(&p->pbm_A);
 
 	/* After the PCI bus scan is complete, we can register
 	 * the error interrupt handlers.
 	 */
-	if (chip_type == PBM_CHIP_TYPE_TOMATILLO)
+	if (p->pbm_B.chip_type == PBM_CHIP_TYPE_TOMATILLO)
 		tomatillo_register_error_handlers(p);
 	else
 		schizo_register_error_handlers(p);
 }
 
-static void schizo_scan_bus(struct pci_controller_info *p)
-{
-	__schizo_scan_bus(p, PBM_CHIP_TYPE_SCHIZO);
-}
-
-static void tomatillo_scan_bus(struct pci_controller_info *p)
-{
-	__schizo_scan_bus(p, PBM_CHIP_TYPE_TOMATILLO);
-}
-
-static void schizo_base_address_update(struct pci_dev *pdev, int resource)
-{
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
-	struct resource *res, *root;
-	u32 reg;
-	int where, size, is_64bit;
-
-	res = &pdev->resource[resource];
-	if (resource < 6) {
-		where = PCI_BASE_ADDRESS_0 + (resource * 4);
-	} else if (resource == PCI_ROM_RESOURCE) {
-		where = pdev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	is_64bit = 0;
-	if (res->flags & IORESOURCE_IO)
-		root = &pbm->io_space;
-	else {
-		root = &pbm->mem_space;
-		if ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
-		    == PCI_BASE_ADDRESS_MEM_TYPE_64)
-			is_64bit = 1;
-	}
-
-	size = res->end - res->start;
-	pci_read_config_dword(pdev, where, &reg);
-	reg = ((reg & size) |
-	       (((u32)(res->start - root->start)) & ~size));
-	if (resource == PCI_ROM_RESOURCE) {
-		reg |= PCI_ROM_ADDRESS_ENABLE;
-		res->flags |= IORESOURCE_ROM_ENABLE;
-	}
-	pci_write_config_dword(pdev, where, reg);
-
-	/* This knows that the upper 32-bits of the address
-	 * must be zero.  Our PCI common layer enforces this.
-	 */
-	if (is_64bit)
-		pci_write_config_dword(pdev, where + 4, 0);
-}
-
-static void schizo_resource_adjust(struct pci_dev *pdev,
-				   struct resource *res,
-				   struct resource *root)
-{
-	res->start += root->start;
-	res->end += root->start;
-}
-
-/* Use ranges property to determine where PCI MEM, I/O, and Config
- * space are for this PCI bus module.
- */
-static void schizo_determine_mem_io_space(struct pci_pbm_info *pbm)
-{
-	int i, saw_cfg, saw_mem, saw_io;
-
-	saw_cfg = saw_mem = saw_io = 0;
-	for (i = 0; i < pbm->num_pbm_ranges; i++) {
-		struct linux_prom_pci_ranges *pr = &pbm->pbm_ranges[i];
-		unsigned long a;
-		int type;
-
-		type = (pr->child_phys_hi >> 24) & 0x3;
-		a = (((unsigned long)pr->parent_phys_hi << 32UL) |
-		     ((unsigned long)pr->parent_phys_lo  <<  0UL));
-
-		switch (type) {
-		case 0:
-			/* PCI config space, 16MB */
-			pbm->config_space = a;
-			saw_cfg = 1;
-			break;
-
-		case 1:
-			/* 16-bit IO space, 16MB */
-			pbm->io_space.start = a;
-			pbm->io_space.end = a + ((16UL*1024UL*1024UL) - 1UL);
-			pbm->io_space.flags = IORESOURCE_IO;
-			saw_io = 1;
-			break;
-
-		case 2:
-			/* 32-bit MEM space, 2GB */
-			pbm->mem_space.start = a;
-			pbm->mem_space.end = a + (0x80000000UL - 1UL);
-			pbm->mem_space.flags = IORESOURCE_MEM;
-			saw_mem = 1;
-			break;
-
-		default:
-			break;
-		};
-	}
-
-	if (!saw_cfg || !saw_io || !saw_mem) {
-		prom_printf("%s: Fatal error, missing %s PBM range.\n",
-			    pbm->name,
-			    ((!saw_cfg ?
-			      "CFG" :
-			      (!saw_io ?
-			       "IO" : "MEM"))));
-		prom_halt();
-	}
-
-	printk("%s: PCI CFG[%lx] IO[%lx] MEM[%lx]\n",
-	       pbm->name,
-	       pbm->config_space,
-	       pbm->io_space.start,
-	       pbm->mem_space.start);
-}
-
-static void pbm_register_toplevel_resources(struct pci_controller_info *p,
-					    struct pci_pbm_info *pbm)
-{
-	pbm->io_space.name = pbm->mem_space.name = pbm->name;
-
-	request_resource(&ioport_resource, &pbm->io_space);
-	request_resource(&iomem_resource, &pbm->mem_space);
-	pci_register_legacy_regions(&pbm->io_space,
-				    &pbm->mem_space);
-}
-
 #define SCHIZO_STRBUF_CONTROL		(0x02800UL)
 #define SCHIZO_STRBUF_FLUSH		(0x02808UL)
 #define SCHIZO_STRBUF_FSYNC		(0x02810UL)
@@ -1472,7 +1308,7 @@ static void schizo_pbm_strbuf_init(struct pci_pbm_info *pbm)
 
 static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 {
-	struct pci_iommu *iommu = pbm->iommu;
+	struct iommu *iommu = pbm->iommu;
 	unsigned long i, tagbase, database;
 	struct property *prop;
 	u32 vdma[2], dma_mask;
@@ -1654,14 +1490,12 @@ static void schizo_pbm_init(struct pci_controller_info *p,
 			    struct device_node *dp, u32 portid,
 			    int chip_type)
 {
-	struct linux_prom64_registers *regs;
-	struct property *prop;
-	unsigned int *busrange;
+	const struct linux_prom64_registers *regs;
+	const unsigned int *busrange;
 	struct pci_pbm_info *pbm;
 	const char *chipset_name;
-	u32 *ino_bitmap;
+	const u32 *ino_bitmap;
 	int is_pbm_a;
-	int len;
 
 	switch (chip_type) {
 	case PBM_CHIP_TYPE_TOMATILLO:
@@ -1689,11 +1523,9 @@ static void schizo_pbm_init(struct pci_controller_info *p,
 	 * 3) PBM PCI config space
 	 * 4) Ichip regs
 	 */
-	prop = of_find_property(dp, "reg", NULL);
-	regs = prop->value;
+	regs = of_get_property(dp, "reg", NULL);
 
 	is_pbm_a = ((regs[0].phys_addr & 0x00700000) == 0x00600000);
-
 	if (is_pbm_a)
 		pbm = &p->pbm_A;
 	else
@@ -1702,17 +1534,10 @@ static void schizo_pbm_init(struct pci_controller_info *p,
 	pbm->portid = portid;
 	pbm->parent = p;
 	pbm->prom_node = dp;
-	pbm->pci_first_slot = 1;
 
 	pbm->chip_type = chip_type;
-	pbm->chip_version = 0;
-	prop = of_find_property(dp, "version#", NULL);
-	if (prop)
-		pbm->chip_version = *(int *) prop->value;
-	pbm->chip_revision = 0;
-	prop = of_find_property(dp, "module-revision#", NULL);
-	if (prop)
-		pbm->chip_revision = *(int *) prop->value;
+	pbm->chip_version = of_getintprop_default(dp, "version#", 0);
+	pbm->chip_revision = of_getintprop_default(dp, "module-version#", 0);
 
 	pbm->pbm_regs = regs[0].phys_addr;
 	pbm->controller_regs = regs[1].phys_addr - 0x10000UL;
@@ -1723,40 +1548,18 @@ static void schizo_pbm_init(struct pci_controller_info *p,
 	pbm->name = dp->full_name;
 
 	printk("%s: %s PCI Bus Module ver[%x:%x]\n",
-	       pbm->name,
-	       (chip_type == PBM_CHIP_TYPE_TOMATILLO ?
-		"TOMATILLO" : "SCHIZO"),
+	       pbm->name, chipset_name,
 	       pbm->chip_version, pbm->chip_revision);
 
 	schizo_pbm_hw_init(pbm);
 
-	prop = of_find_property(dp, "ranges", &len);
-	pbm->pbm_ranges = prop->value;
-	pbm->num_pbm_ranges =
-		(len / sizeof(struct linux_prom_pci_ranges));
+	pci_determine_mem_io_space(pbm);
 
-	schizo_determine_mem_io_space(pbm);
-	pbm_register_toplevel_resources(p, pbm);
-
-	prop = of_find_property(dp, "interrupt-map", &len);
-	if (prop) {
-		pbm->pbm_intmap = prop->value;
-		pbm->num_pbm_intmap =
-			(len / sizeof(struct linux_prom_pci_intmap));
-
-		prop = of_find_property(dp, "interrupt-map-mask", NULL);
-		pbm->pbm_intmask = prop->value;
-	} else {
-		pbm->num_pbm_intmap = 0;
-	}
-
-	prop = of_find_property(dp, "ino-bitmap", NULL);
-	ino_bitmap = prop->value;
+	ino_bitmap = of_get_property(dp, "ino-bitmap", NULL);
 	pbm->ino_bitmap = (((u64)ino_bitmap[1] << 32UL) |
 			   ((u64)ino_bitmap[0] <<  0UL));
 
-	prop = of_find_property(dp, "bus-range", NULL);
-	busrange = prop->value;
+	busrange = of_get_property(dp, "bus-range", NULL);
 	pbm->pci_first_busno = busrange[0];
 	pbm->pci_last_busno = busrange[1];
 
@@ -1777,15 +1580,10 @@ static inline int portid_compare(u32 x, u32 y, int chip_type)
 static void __schizo_init(struct device_node *dp, char *model_name, int chip_type)
 {
 	struct pci_controller_info *p;
-	struct pci_iommu *iommu;
-	struct property *prop;
-	int is_pbm_a;
+	struct iommu *iommu;
 	u32 portid;
 
-	portid = 0xff;
-	prop = of_find_property(dp, "portid", NULL);
-	if (prop)
-		portid = *(u32 *) prop->value;
+	portid = of_getintprop_default(dp, "portid", 0xff);
 
 	for (p = pci_controller_root; p; p = p->next) {
 		struct pci_pbm_info *pbm;
@@ -1798,48 +1596,43 @@ static void __schizo_init(struct device_node *dp, char *model_name, int chip_typ
 		       &p->pbm_B);
 
 		if (portid_compare(pbm->portid, portid, chip_type)) {
-			is_pbm_a = (p->pbm_A.prom_node == NULL);
 			schizo_pbm_init(p, dp, portid, chip_type);
 			return;
 		}
 	}
 
 	p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
-	if (!p) {
-		prom_printf("SCHIZO: Fatal memory allocation error.\n");
-		prom_halt();
-	}
+	if (!p)
+		goto memfail;
+
+	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
+	if (!iommu)
+		goto memfail;
 
-	iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
-	if (!iommu) {
-		prom_printf("SCHIZO: Fatal memory allocation error.\n");
-		prom_halt();
-	}
 	p->pbm_A.iommu = iommu;
 
-	iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
-	if (!iommu) {
-		prom_printf("SCHIZO: Fatal memory allocation error.\n");
-		prom_halt();
-	}
+	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
+	if (!iommu)
+		goto memfail;
+
 	p->pbm_B.iommu = iommu;
 
 	p->next = pci_controller_root;
 	pci_controller_root = p;
 
 	p->index = pci_num_controllers++;
-	p->pbms_same_domain = 0;
-	p->scan_bus = (chip_type == PBM_CHIP_TYPE_TOMATILLO ?
-		       tomatillo_scan_bus :
-		       schizo_scan_bus);
-	p->base_address_update = schizo_base_address_update;
-	p->resource_adjust = schizo_resource_adjust;
+	p->scan_bus = schizo_scan_bus;
 	p->pci_ops = &schizo_ops;
 
 	/* Like PSYCHO we have a 2GB aligned area for memory space. */
 	pci_memspace_mask = 0x7fffffffUL;
 
 	schizo_pbm_init(p, dp, portid, chip_type);
+	return;
+
+memfail:
+	prom_printf("SCHIZO: Fatal memory allocation error.\n");
+	prom_halt();
 }
 
 void schizo_init(struct device_node *dp, char *model_name)
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index ec22cd61ec8c..94295c219329 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -1,6 +1,6 @@
 /* pci_sun4v.c: SUN4V specific PCI controller support.
  *
- * Copyright (C) 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kernel.h>
@@ -29,7 +29,7 @@
 
 #define PGLIST_NENTS	(PAGE_SIZE / sizeof(u64))
 
-struct pci_iommu_batch {
+struct iommu_batch {
 	struct pci_dev	*pdev;		/* Device mapping is for.	*/
 	unsigned long	prot;		/* IOMMU page protections	*/
 	unsigned long	entry;		/* Index into IOTSB.		*/
@@ -37,12 +37,12 @@ struct pci_iommu_batch {
 	unsigned long	npages;		/* Number of pages in list.	*/
 };
 
-static DEFINE_PER_CPU(struct pci_iommu_batch, pci_iommu_batch);
+static DEFINE_PER_CPU(struct iommu_batch, pci_iommu_batch);
 
 /* Interrupts must be disabled.  */
 static inline void pci_iommu_batch_start(struct pci_dev *pdev, unsigned long prot, unsigned long entry)
 {
-	struct pci_iommu_batch *p = &__get_cpu_var(pci_iommu_batch);
+	struct iommu_batch *p = &__get_cpu_var(pci_iommu_batch);
 
 	p->pdev		= pdev;
 	p->prot		= prot;
@@ -51,10 +51,10 @@ static inline void pci_iommu_batch_start(struct pci_dev *pdev, unsigned long pro
 }
 
 /* Interrupts must be disabled.  */
-static long pci_iommu_batch_flush(struct pci_iommu_batch *p)
+static long pci_iommu_batch_flush(struct iommu_batch *p)
 {
-	struct pcidev_cookie *pcp = p->pdev->sysdata;
-	unsigned long devhandle = pcp->pbm->devhandle;
+	struct pci_pbm_info *pbm = p->pdev->dev.archdata.host_controller;
+	unsigned long devhandle = pbm->devhandle;
 	unsigned long prot = p->prot;
 	unsigned long entry = p->entry;
 	u64 *pglist = p->pglist;
@@ -89,7 +89,7 @@ static long pci_iommu_batch_flush(struct pci_iommu_batch *p)
 /* Interrupts must be disabled.  */
 static inline long pci_iommu_batch_add(u64 phys_page)
 {
-	struct pci_iommu_batch *p = &__get_cpu_var(pci_iommu_batch);
+	struct iommu_batch *p = &__get_cpu_var(pci_iommu_batch);
 
 	BUG_ON(p->npages >= PGLIST_NENTS);
 
@@ -103,14 +103,14 @@ static inline long pci_iommu_batch_add(u64 phys_page)
 /* Interrupts must be disabled.  */
 static inline long pci_iommu_batch_end(void)
 {
-	struct pci_iommu_batch *p = &__get_cpu_var(pci_iommu_batch);
+	struct iommu_batch *p = &__get_cpu_var(pci_iommu_batch);
 
 	BUG_ON(p->npages >= PGLIST_NENTS);
 
 	return pci_iommu_batch_flush(p);
 }
 
-static long pci_arena_alloc(struct pci_iommu_arena *arena, unsigned long npages)
+static long pci_arena_alloc(struct iommu_arena *arena, unsigned long npages)
 {
 	unsigned long n, i, start, end, limit;
 	int pass;
@@ -149,7 +149,7 @@ again:
 	return n;
 }
 
-static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, unsigned long npages)
+static void pci_arena_free(struct iommu_arena *arena, unsigned long base, unsigned long npages)
 {
 	unsigned long i;
 
@@ -159,8 +159,7 @@ static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, un
 
 static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	unsigned long flags, order, first_page, npages, n;
 	void *ret;
 	long entry;
@@ -178,8 +177,7 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 
 	memset((char *)first_page, 0, PAGE_SIZE << order);
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
+	iommu = pdev->dev.archdata.iommu;
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	entry = pci_arena_alloc(&iommu->arena, npages);
@@ -226,15 +224,15 @@ arena_alloc_fail:
 
 static void pci_4v_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_t dvma)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct pci_pbm_info *pbm;
+	struct iommu *iommu;
 	unsigned long flags, order, npages, entry;
 	u32 devhandle;
 
 	npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT;
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	devhandle = pcp->pbm->devhandle;
+	iommu = pdev->dev.archdata.iommu;
+	pbm = pdev->dev.archdata.host_controller;
+	devhandle = pbm->devhandle;
 	entry = ((dvma - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
 
 	spin_lock_irqsave(&iommu->lock, flags);
@@ -259,16 +257,14 @@ static void pci_4v_free_consistent(struct pci_dev *pdev, size_t size, void *cpu,
 
 static dma_addr_t pci_4v_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	unsigned long flags, npages, oaddr;
 	unsigned long i, base_paddr;
 	u32 bus_addr, ret;
 	unsigned long prot;
 	long entry;
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
+	iommu = pdev->dev.archdata.iommu;
 
 	if (unlikely(direction == PCI_DMA_NONE))
 		goto bad;
@@ -324,8 +320,8 @@ iommu_map_fail:
 
 static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct pci_pbm_info *pbm;
+	struct iommu *iommu;
 	unsigned long flags, npages;
 	long entry;
 	u32 devhandle;
@@ -336,9 +332,9 @@ static void pci_4v_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_
 		return;
 	}
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	devhandle = pcp->pbm->devhandle;
+	iommu = pdev->dev.archdata.iommu;
+	pbm = pdev->dev.archdata.host_controller;
+	devhandle = pbm->devhandle;
 
 	npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
@@ -460,8 +456,7 @@ iommu_map_failed:
 
 static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	unsigned long flags, npages, prot;
 	u32 dma_base;
 	struct scatterlist *sgtmp;
@@ -480,8 +475,7 @@ static int pci_4v_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int n
 		return 1;
 	}
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
+	iommu = pdev->dev.archdata.iommu;
 	
 	if (unlikely(direction == PCI_DMA_NONE))
 		goto bad;
@@ -537,8 +531,8 @@ iommu_map_failed:
 
 static void pci_4v_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct pcidev_cookie *pcp;
-	struct pci_iommu *iommu;
+	struct pci_pbm_info *pbm;
+	struct iommu *iommu;
 	unsigned long flags, i, npages;
 	long entry;
 	u32 devhandle, bus_addr;
@@ -548,9 +542,9 @@ static void pci_4v_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, in
 			WARN_ON(1);
 	}
 
-	pcp = pdev->sysdata;
-	iommu = pcp->pbm->iommu;
-	devhandle = pcp->pbm->devhandle;
+	iommu = pdev->dev.archdata.iommu;
+	pbm = pdev->dev.archdata.host_controller;
+	devhandle = pbm->devhandle;
 	
 	bus_addr = sglist->dma_address & IO_PAGE_MASK;
 
@@ -589,7 +583,7 @@ static void pci_4v_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist
 	/* Nothing to do... */
 }
 
-struct pci_iommu_ops pci_sun4v_iommu_ops = {
+const struct pci_iommu_ops pci_sun4v_iommu_ops = {
 	.alloc_consistent		= pci_4v_alloc_consistent,
 	.free_consistent		= pci_4v_free_consistent,
 	.map_single			= pci_4v_map_single,
@@ -600,132 +594,12 @@ struct pci_iommu_ops pci_sun4v_iommu_ops = {
 	.dma_sync_sg_for_cpu		= pci_4v_dma_sync_sg_for_cpu,
 };
 
-/* SUN4V PCI configuration space accessors. */
-
-struct pdev_entry {
-	struct pdev_entry	*next;
-	u32			devhandle;
-	unsigned int		bus;
-	unsigned int		device;
-	unsigned int		func;
-};
-
-#define PDEV_HTAB_SIZE	16
-#define PDEV_HTAB_MASK	(PDEV_HTAB_SIZE - 1)
-static struct pdev_entry *pdev_htab[PDEV_HTAB_SIZE];
-
-static inline unsigned int pdev_hashfn(u32 devhandle, unsigned int bus, unsigned int device, unsigned int func)
-{
-	unsigned int val;
-
-	val = (devhandle ^ (devhandle >> 4));
-	val ^= bus;
-	val ^= device;
-	val ^= func;
-
-	return val & PDEV_HTAB_MASK;
-}
-
-static int pdev_htab_add(u32 devhandle, unsigned int bus, unsigned int device, unsigned int func)
-{
-	struct pdev_entry *p = kmalloc(sizeof(*p), GFP_KERNEL);
-	struct pdev_entry **slot;
-
-	if (!p)
-		return -ENOMEM;
-
-	slot = &pdev_htab[pdev_hashfn(devhandle, bus, device, func)];
-	p->next = *slot;
-	*slot = p;
-
-	p->devhandle = devhandle;
-	p->bus = bus;
-	p->device = device;
-	p->func = func;
-
-	return 0;
-}
-
-/* Recursively descend into the OBP device tree, rooted at toplevel_node,
- * looking for a PCI device matching bus and devfn.
- */
-static int obp_find(struct device_node *toplevel_node, unsigned int bus, unsigned int devfn)
-{
-	toplevel_node = toplevel_node->child;
-
-	while (toplevel_node != NULL) {
-		struct linux_prom_pci_registers *regs;
-		struct property *prop;
-		int ret;
-
-		ret = obp_find(toplevel_node, bus, devfn);
-		if (ret != 0)
-			return ret;
-
-		prop = of_find_property(toplevel_node, "reg", NULL);
-		if (!prop)
-			goto next_sibling;
-
-		regs = prop->value;
-		if (((regs->phys_hi >> 16) & 0xff) == bus &&
-		    ((regs->phys_hi >> 8) & 0xff) == devfn)
-			break;
-
-	next_sibling:
-		toplevel_node = toplevel_node->sibling;
-	}
-
-	return toplevel_node != NULL;
-}
-
-static int pdev_htab_populate(struct pci_pbm_info *pbm)
-{
-	u32 devhandle = pbm->devhandle;
-	unsigned int bus;
-
-	for (bus = pbm->pci_first_busno; bus <= pbm->pci_last_busno; bus++) {
-		unsigned int devfn;
-
-		for (devfn = 0; devfn < 256; devfn++) {
-			unsigned int device = PCI_SLOT(devfn);
-			unsigned int func = PCI_FUNC(devfn);
-
-			if (obp_find(pbm->prom_node, bus, devfn)) {
-				int err = pdev_htab_add(devhandle, bus,
-							device, func);
-				if (err)
-					return err;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct pdev_entry *pdev_find(u32 devhandle, unsigned int bus, unsigned int device, unsigned int func)
-{
-	struct pdev_entry *p;
-
-	p = pdev_htab[pdev_hashfn(devhandle, bus, device, func)];
-	while (p) {
-		if (p->devhandle == devhandle &&
-		    p->bus == bus &&
-		    p->device == device &&
-		    p->func == func)
-			break;
-
-		p = p->next;
-	}
-
-	return p;
-}
-
 static inline int pci_sun4v_out_of_range(struct pci_pbm_info *pbm, unsigned int bus, unsigned int device, unsigned int func)
 {
 	if (bus < pbm->pci_first_busno ||
 	    bus > pbm->pci_last_busno)
 		return 1;
-	return pdev_find(pbm->devhandle, bus, device, func) == NULL;
+	return 0;
 }
 
 static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
@@ -738,6 +612,9 @@ static int pci_sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 	unsigned int func = PCI_FUNC(devfn);
 	unsigned long ret;
 
+	if (bus_dev == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_read_pci_cfg(bus_dev, devfn, where,
+						    size, value);
 	if (pci_sun4v_out_of_range(pbm, bus, device, func)) {
 		ret = ~0UL;
 	} else {
@@ -776,6 +653,9 @@ static int pci_sun4v_write_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
 	unsigned int func = PCI_FUNC(devfn);
 	unsigned long ret;
 
+	if (bus_dev == pbm->pci_bus && devfn == 0x00)
+		return pci_host_bridge_write_pci_cfg(bus_dev, devfn, where,
+						     size, value);
 	if (pci_sun4v_out_of_range(pbm, bus, device, func)) {
 		/* Do nothing. */
 	} else {
@@ -800,27 +680,7 @@ static struct pci_ops pci_sun4v_ops = {
 static void pbm_scan_bus(struct pci_controller_info *p,
 			 struct pci_pbm_info *pbm)
 {
-	struct pcidev_cookie *cookie = kzalloc(sizeof(*cookie), GFP_KERNEL);
-
-	if (!cookie) {
-		prom_printf("%s: Critical allocation failure.\n", pbm->name);
-		prom_halt();
-	}
-
-	/* All we care about is the PBM. */
-	cookie->pbm = pbm;
-
-	pbm->pci_bus = pci_scan_bus(pbm->pci_first_busno, p->pci_ops, pbm);
-#if 0
-	pci_fixup_host_bridge_self(pbm->pci_bus);
-	pbm->pci_bus->self->sysdata = cookie;
-#endif
-	pci_fill_in_pbm_cookies(pbm->pci_bus, pbm, pbm->prom_node);
-	pci_record_assignments(pbm, pbm->pci_bus);
-	pci_assign_unassigned(pbm, pbm->pci_bus);
-	pci_fixup_irq(pbm, pbm->pci_bus);
-	pci_determine_66mhz_disposition(pbm, pbm->pci_bus);
-	pci_setup_busmastering(pbm, pbm->pci_bus);
+	pbm->pci_bus = pci_scan_one_pbm(pbm);
 }
 
 static void pci_sun4v_scan_bus(struct pci_controller_info *p)
@@ -844,130 +704,10 @@ static void pci_sun4v_scan_bus(struct pci_controller_info *p)
 	/* XXX register error interrupt handlers XXX */
 }
 
-static void pci_sun4v_base_address_update(struct pci_dev *pdev, int resource)
-{
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
-	struct resource *res, *root;
-	u32 reg;
-	int where, size, is_64bit;
-
-	res = &pdev->resource[resource];
-	if (resource < 6) {
-		where = PCI_BASE_ADDRESS_0 + (resource * 4);
-	} else if (resource == PCI_ROM_RESOURCE) {
-		where = pdev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	/* XXX 64-bit MEM handling is not %100 correct... XXX */
-	is_64bit = 0;
-	if (res->flags & IORESOURCE_IO)
-		root = &pbm->io_space;
-	else {
-		root = &pbm->mem_space;
-		if ((res->flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK)
-		    == PCI_BASE_ADDRESS_MEM_TYPE_64)
-			is_64bit = 1;
-	}
-
-	size = res->end - res->start;
-	pci_read_config_dword(pdev, where, &reg);
-	reg = ((reg & size) |
-	       (((u32)(res->start - root->start)) & ~size));
-	if (resource == PCI_ROM_RESOURCE) {
-		reg |= PCI_ROM_ADDRESS_ENABLE;
-		res->flags |= IORESOURCE_ROM_ENABLE;
-	}
-	pci_write_config_dword(pdev, where, reg);
-
-	/* This knows that the upper 32-bits of the address
-	 * must be zero.  Our PCI common layer enforces this.
-	 */
-	if (is_64bit)
-		pci_write_config_dword(pdev, where + 4, 0);
-}
-
-static void pci_sun4v_resource_adjust(struct pci_dev *pdev,
-				      struct resource *res,
-				      struct resource *root)
-{
-	res->start += root->start;
-	res->end += root->start;
-}
-
-/* Use ranges property to determine where PCI MEM, I/O, and Config
- * space are for this PCI bus module.
- */
-static void pci_sun4v_determine_mem_io_space(struct pci_pbm_info *pbm)
-{
-	int i, saw_mem, saw_io;
-
-	saw_mem = saw_io = 0;
-	for (i = 0; i < pbm->num_pbm_ranges; i++) {
-		struct linux_prom_pci_ranges *pr = &pbm->pbm_ranges[i];
-		unsigned long a;
-		int type;
-
-		type = (pr->child_phys_hi >> 24) & 0x3;
-		a = (((unsigned long)pr->parent_phys_hi << 32UL) |
-		     ((unsigned long)pr->parent_phys_lo  <<  0UL));
-
-		switch (type) {
-		case 1:
-			/* 16-bit IO space, 16MB */
-			pbm->io_space.start = a;
-			pbm->io_space.end = a + ((16UL*1024UL*1024UL) - 1UL);
-			pbm->io_space.flags = IORESOURCE_IO;
-			saw_io = 1;
-			break;
-
-		case 2:
-			/* 32-bit MEM space, 2GB */
-			pbm->mem_space.start = a;
-			pbm->mem_space.end = a + (0x80000000UL - 1UL);
-			pbm->mem_space.flags = IORESOURCE_MEM;
-			saw_mem = 1;
-			break;
-
-		case 3:
-			/* XXX 64-bit MEM handling XXX */
-
-		default:
-			break;
-		};
-	}
-
-	if (!saw_io || !saw_mem) {
-		prom_printf("%s: Fatal error, missing %s PBM range.\n",
-			    pbm->name,
-			    (!saw_io ? "IO" : "MEM"));
-		prom_halt();
-	}
-
-	printk("%s: PCI IO[%lx] MEM[%lx]\n",
-	       pbm->name,
-	       pbm->io_space.start,
-	       pbm->mem_space.start);
-}
-
-static void pbm_register_toplevel_resources(struct pci_controller_info *p,
-					    struct pci_pbm_info *pbm)
-{
-	pbm->io_space.name = pbm->mem_space.name = pbm->name;
-
-	request_resource(&ioport_resource, &pbm->io_space);
-	request_resource(&iomem_resource, &pbm->mem_space);
-	pci_register_legacy_regions(&pbm->io_space,
-				    &pbm->mem_space);
-}
-
 static unsigned long probe_existing_entries(struct pci_pbm_info *pbm,
-					    struct pci_iommu *iommu)
+					    struct iommu *iommu)
 {
-	struct pci_iommu_arena *arena = &iommu->arena;
+	struct iommu_arena *arena = &iommu->arena;
 	unsigned long i, cnt = 0;
 	u32 devhandle;
 
@@ -994,7 +734,7 @@ static unsigned long probe_existing_entries(struct pci_pbm_info *pbm,
 
 static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
 {
-	struct pci_iommu *iommu = pbm->iommu;
+	struct iommu *iommu = pbm->iommu;
 	struct property *prop;
 	unsigned long num_tsb_entries, sz;
 	u32 vdma[2], dma_mask, dma_offset;
@@ -1281,7 +1021,7 @@ h_error:
 
 static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 {
-	u32 *val;
+	const u32 *val;
 	int len;
 
 	val = of_get_property(pbm->prom_node, "#msi-eqs", &len);
@@ -1289,16 +1029,16 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 		goto no_msi;
 	pbm->msiq_num = *val;
 	if (pbm->msiq_num) {
-		struct msiq_prop {
+		const struct msiq_prop {
 			u32 first_msiq;
 			u32 num_msiq;
 			u32 first_devino;
 		} *mqp;
-		struct msi_range_prop {
+		const struct msi_range_prop {
 			u32 first_msi;
 			u32 num_msi;
 		} *mrng;
-		struct addr_range_prop {
+		const struct addr_range_prop {
 			u32 msi32_high;
 			u32 msi32_low;
 			u32 msi32_len;
@@ -1410,8 +1150,7 @@ static int pci_sun4v_setup_msi_irq(unsigned int *virt_irq_p,
 				   struct pci_dev *pdev,
 				   struct msi_desc *entry)
 {
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
+	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned long devino, msiqid;
 	struct msi_msg msg;
 	int msi_num, err;
@@ -1455,7 +1194,7 @@ static int pci_sun4v_setup_msi_irq(unsigned int *virt_irq_p,
 	if (pci_sun4v_msi_setvalid(pbm->devhandle, msi_num, HV_MSIVALID_VALID))
 		goto out_err;
 
-	pcp->msi_num = msi_num;
+	pdev->dev.archdata.msi_num = msi_num;
 
 	if (entry->msi_attrib.is_64) {
 		msg.address_hi = pbm->msi64_start >> 32;
@@ -1484,12 +1223,11 @@ out_err:
 static void pci_sun4v_teardown_msi_irq(unsigned int virt_irq,
 				       struct pci_dev *pdev)
 {
-	struct pcidev_cookie *pcp = pdev->sysdata;
-	struct pci_pbm_info *pbm = pcp->pbm;
+	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned long msiqid, err;
 	unsigned int msi_num;
 
-	msi_num = pcp->msi_num;
+	msi_num = pdev->dev.archdata.msi_num;
 	err = pci_sun4v_msi_getmsiq(pbm->devhandle, msi_num, &msiqid);
 	if (err) {
 		printk(KERN_ERR "%s: getmsiq gives error %lu\n",
@@ -1516,8 +1254,6 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 static void pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node *dp, u32 devhandle)
 {
 	struct pci_pbm_info *pbm;
-	struct property *prop;
-	int len, i;
 
 	if (devhandle & 0x40)
 		pbm = &p->pbm_B;
@@ -1526,7 +1262,6 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node
 
 	pbm->parent = p;
 	pbm->prom_node = dp;
-	pbm->pci_first_slot = 1;
 
 	pbm->devhandle = devhandle;
 
@@ -1534,39 +1269,17 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node
 
 	printk("%s: SUN4V PCI Bus Module\n", pbm->name);
 
-	prop = of_find_property(dp, "ranges", &len);
-	pbm->pbm_ranges = prop->value;
-	pbm->num_pbm_ranges =
-		(len / sizeof(struct linux_prom_pci_ranges));
-
-	/* Mask out the top 8 bits of the ranges, leaving the real
-	 * physical address.
-	 */
-	for (i = 0; i < pbm->num_pbm_ranges; i++)
-		pbm->pbm_ranges[i].parent_phys_hi &= 0x0fffffff;
-
-	pci_sun4v_determine_mem_io_space(pbm);
-	pbm_register_toplevel_resources(p, pbm);
-
-	prop = of_find_property(dp, "interrupt-map", &len);
-	pbm->pbm_intmap = prop->value;
-	pbm->num_pbm_intmap =
-		(len / sizeof(struct linux_prom_pci_intmap));
-
-	prop = of_find_property(dp, "interrupt-map-mask", NULL);
-	pbm->pbm_intmask = prop->value;
+	pci_determine_mem_io_space(pbm);
 
 	pci_sun4v_get_bus_range(pbm);
 	pci_sun4v_iommu_init(pbm);
 	pci_sun4v_msi_init(pbm);
-
-	pdev_htab_populate(pbm);
 }
 
 void sun4v_pci_init(struct device_node *dp, char *model_name)
 {
 	struct pci_controller_info *p;
-	struct pci_iommu *iommu;
+	struct iommu *iommu;
 	struct property *prop;
 	struct linux_prom64_registers *regs;
 	u32 devhandle;
@@ -1606,13 +1319,13 @@ void sun4v_pci_init(struct device_node *dp, char *model_name)
 	if (!p)
 		goto fatal_memory_error;
 
-	iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
+	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
 	if (!iommu)
 		goto fatal_memory_error;
 
 	p->pbm_A.iommu = iommu;
 
-	iommu = kzalloc(sizeof(struct pci_iommu), GFP_ATOMIC);
+	iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
 	if (!iommu)
 		goto fatal_memory_error;
 
@@ -1622,11 +1335,8 @@ void sun4v_pci_init(struct device_node *dp, char *model_name)
 	pci_controller_root = p;
 
 	p->index = pci_num_controllers++;
-	p->pbms_same_domain = 0;
 
 	p->scan_bus = pci_sun4v_scan_bus;
-	p->base_address_update = pci_sun4v_base_address_update;
-	p->resource_adjust = pci_sun4v_resource_adjust;
 #ifdef CONFIG_PCI_MSI
 	p->setup_msi_irq = pci_sun4v_setup_msi_irq;
 	p->teardown_msi_irq = pci_sun4v_teardown_msi_irq;
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 7d75cd4eb297..a114151f9fbe 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/compat.h>
+#include <linux/tick.h>
 #include <linux/init.h>
 
 #include <asm/oplib.h>
@@ -88,12 +89,14 @@ void cpu_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while(1) {
-		if (need_resched()) {
-			preempt_enable_no_resched();
-			schedule();
-			preempt_disable();
-		}
-		sparc64_yield();
+		tick_nohz_stop_sched_tick();
+		while (!need_resched())
+			sparc64_yield();
+		tick_nohz_restart_sched_tick();
+
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
 	}
 }
 
@@ -413,8 +416,13 @@ void flush_thread(void)
 	struct thread_info *t = current_thread_info();
 	struct mm_struct *mm;
 
-	if (t->flags & _TIF_ABI_PENDING)
-		t->flags ^= (_TIF_ABI_PENDING | _TIF_32BIT);
+	if (test_ti_thread_flag(t, TIF_ABI_PENDING)) {
+		clear_ti_thread_flag(t, TIF_ABI_PENDING);
+		if (test_ti_thread_flag(t, TIF_32BIT))
+			clear_ti_thread_flag(t, TIF_32BIT);
+		else
+			set_ti_thread_flag(t, TIF_32BIT);
+	}
 
 	mm = t->task->mm;
 	if (mm)
diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c
index 0917c24c4f08..5e1fcd05160d 100644
--- a/arch/sparc64/kernel/prom.c
+++ b/arch/sparc64/kernel/prom.c
@@ -36,12 +36,13 @@ static struct device_node *allnodes;
  */
 static DEFINE_RWLOCK(devtree_lock);
 
-int of_device_is_compatible(struct device_node *device, const char *compat)
+int of_device_is_compatible(const struct device_node *device,
+			    const char *compat)
 {
 	const char* cp;
 	int cplen, l;
 
-	cp = (char *) of_get_property(device, "compatible", &cplen);
+	cp = of_get_property(device, "compatible", &cplen);
 	if (cp == NULL)
 		return 0;
 	while (cplen > 0) {
@@ -154,13 +155,14 @@ struct device_node *of_find_compatible_node(struct device_node *from,
 }
 EXPORT_SYMBOL(of_find_compatible_node);
 
-struct property *of_find_property(struct device_node *np, const char *name,
+struct property *of_find_property(const struct device_node *np,
+				  const char *name,
 				  int *lenp)
 {
 	struct property *pp;
 
 	for (pp = np->properties; pp != 0; pp = pp->next) {
-		if (strcmp(pp->name, name) == 0) {
+		if (strcasecmp(pp->name, name) == 0) {
 			if (lenp != 0)
 				*lenp = pp->length;
 			break;
@@ -174,7 +176,8 @@ EXPORT_SYMBOL(of_find_property);
  * Find a property with a given name for a given node
  * and return the value.
  */
-void *of_get_property(struct device_node *np, const char *name, int *lenp)
+const void *of_get_property(const struct device_node *np, const char *name,
+		      int *lenp)
 {
 	struct property *pp = of_find_property(np,name,lenp);
 	return pp ? pp->value : NULL;
@@ -196,7 +199,7 @@ EXPORT_SYMBOL(of_getintprop_default);
 
 int of_n_addr_cells(struct device_node *np)
 {
-	int* ip;
+	const int* ip;
 	do {
 		if (np->parent)
 			np = np->parent;
@@ -211,7 +214,7 @@ EXPORT_SYMBOL(of_n_addr_cells);
 
 int of_n_size_cells(struct device_node *np)
 {
-	int* ip;
+	const int* ip;
 	do {
 		if (np->parent)
 			np = np->parent;
@@ -243,7 +246,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 	while (*prevp) {
 		struct property *prop = *prevp;
 
-		if (!strcmp(prop->name, name)) {
+		if (!strcasecmp(prop->name, name)) {
 			void *old_val = prop->value;
 			int ret;
 
@@ -397,7 +400,7 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 
 static void psycho_irq_trans_init(struct device_node *dp)
 {
-	struct linux_prom64_registers *regs;
+	const struct linux_prom64_registers *regs;
 
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
 	dp->irq_trans->irq_build = psycho_irq_build;
@@ -547,7 +550,7 @@ static unsigned long __sabre_onboard_imap_off[] = {
 static int sabre_device_needs_wsync(struct device_node *dp)
 {
 	struct device_node *parent = dp->parent;
-	char *parent_model, *parent_compat;
+	const char *parent_model, *parent_compat;
 
 	/* This traversal up towards the root is meant to
 	 * handle two cases:
@@ -589,7 +592,7 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 {
 	struct sabre_irq_data *irq_data = _data;
 	unsigned long controller_regs = irq_data->controller_regs;
-	struct linux_prom_pci_registers *regs;
+	const struct linux_prom_pci_registers *regs;
 	unsigned long imap, iclr;
 	unsigned long imap_off, iclr_off;
 	int inofixup = 0;
@@ -639,9 +642,9 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 
 static void sabre_irq_trans_init(struct device_node *dp)
 {
-	struct linux_prom64_registers *regs;
+	const struct linux_prom64_registers *regs;
 	struct sabre_irq_data *irq_data;
-	u32 *busrange;
+	const u32 *busrange;
 
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
 	dp->irq_trans->irq_build = sabre_irq_build;
@@ -795,7 +798,7 @@ static unsigned int schizo_irq_build(struct device_node *dp,
 
 static void __schizo_irq_trans_init(struct device_node *dp, int is_tomatillo)
 {
-	struct linux_prom64_registers *regs;
+	const struct linux_prom64_registers *regs;
 	struct schizo_irq_data *irq_data;
 
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
@@ -836,7 +839,7 @@ static unsigned int pci_sun4v_irq_build(struct device_node *dp,
 
 static void pci_sun4v_irq_trans_init(struct device_node *dp)
 {
-	struct linux_prom64_registers *regs;
+	const struct linux_prom64_registers *regs;
 
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
 	dp->irq_trans->irq_build = pci_sun4v_irq_build;
@@ -940,7 +943,7 @@ static unsigned int sbus_of_build_irq(struct device_node *dp,
 				      void *_data)
 {
 	unsigned long reg_base = (unsigned long) _data;
-	struct linux_prom_registers *regs;
+	const struct linux_prom_registers *regs;
 	unsigned long imap, iclr;
 	int sbus_slot = 0;
 	int sbus_level = 0;
@@ -994,7 +997,7 @@ static unsigned int sbus_of_build_irq(struct device_node *dp,
 
 static void sbus_irq_trans_init(struct device_node *dp)
 {
-	struct linux_prom64_registers *regs;
+	const struct linux_prom64_registers *regs;
 
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
 	dp->irq_trans->irq_build = sbus_of_build_irq;
@@ -1080,7 +1083,7 @@ static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
 
 static void sun4v_vdev_irq_trans_init(struct device_node *dp)
 {
-	struct linux_prom64_registers *regs;
+	const struct linux_prom64_registers *regs;
 
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
 	dp->irq_trans->irq_build = sun4v_vdev_irq_build;
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index 01d6d869ea2b..3b05428cc909 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -24,48 +24,11 @@
 
 #include "iommu_common.h"
 
-/* These should be allocated on an SMP_CACHE_BYTES
- * aligned boundary for optimal performance.
- *
- * On SYSIO, using an 8K page size we have 1GB of SBUS
- * DMA space mapped.  We divide this space into equally
- * sized clusters. We allocate a DMA mapping from the
- * cluster that matches the order of the allocation, or
- * if the order is greater than the number of clusters,
- * we try to allocate from the last cluster.
- */
-
-#define NCLUSTERS	8UL
-#define ONE_GIG		(1UL * 1024UL * 1024UL * 1024UL)
-#define CLUSTER_SIZE	(ONE_GIG / NCLUSTERS)
-#define CLUSTER_MASK	(CLUSTER_SIZE - 1)
-#define CLUSTER_NPAGES	(CLUSTER_SIZE >> IO_PAGE_SHIFT)
 #define MAP_BASE	((u32)0xc0000000)
 
-struct sbus_iommu {
-/*0x00*/spinlock_t		lock;
-
-/*0x08*/iopte_t			*page_table;
-/*0x10*/unsigned long		strbuf_regs;
-/*0x18*/unsigned long		iommu_regs;
-/*0x20*/unsigned long		sbus_control_reg;
-
-/*0x28*/volatile unsigned long	strbuf_flushflag;
-
-	/* If NCLUSTERS is ever decresed to 4 or lower,
-	 * you must increase the size of the type of
-	 * these counters.  You have been duly warned. -DaveM
-	 */
-/*0x30*/struct {
-		u16	next;
-		u16	flush;
-	} alloc_info[NCLUSTERS];
-
-	/* The lowest used consistent mapping entry.  Since
-	 * we allocate consistent maps out of cluster 0 this
-	 * is relative to the beginning of closter 0.
-	 */
-/*0x50*/u32		lowest_consistent_map;
+struct sbus_info {
+	struct iommu	iommu;
+	struct strbuf	strbuf;
 };
 
 /* Offsets from iommu_regs */
@@ -81,29 +44,17 @@ struct sbus_iommu {
 
 #define IOMMU_DRAM_VALID	(1UL << 30UL)
 
-static void __iommu_flushall(struct sbus_iommu *iommu)
+static void __iommu_flushall(struct iommu *iommu)
 {
-	unsigned long tag = iommu->iommu_regs + IOMMU_TAGDIAG;
+	unsigned long tag;
 	int entry;
 
+	tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL);
 	for (entry = 0; entry < 16; entry++) {
 		upa_writeq(0, tag);
 		tag += 8UL;
 	}
-	upa_readq(iommu->sbus_control_reg);
-
-	for (entry = 0; entry < NCLUSTERS; entry++) {
-		iommu->alloc_info[entry].flush =
-			iommu->alloc_info[entry].next;
-	}
-}
-
-static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
-{
-	while (npages--)
-		upa_writeq(base + (npages << IO_PAGE_SHIFT),
-			   iommu->iommu_regs + IOMMU_FLUSH);
-	upa_readq(iommu->sbus_control_reg);
+	upa_readq(iommu->write_complete_reg);
 }
 
 /* Offsets from strbuf_regs */
@@ -118,15 +69,14 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages
 
 #define STRBUF_TAG_VALID	0x02UL
 
-static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction)
+static void sbus_strbuf_flush(struct iommu *iommu, struct strbuf *strbuf, u32 base, unsigned long npages, int direction)
 {
 	unsigned long n;
 	int limit;
 
 	n = npages;
 	while (n--)
-		upa_writeq(base + (n << IO_PAGE_SHIFT),
-			   iommu->strbuf_regs + STRBUF_PFLUSH);
+		upa_writeq(base + (n << IO_PAGE_SHIFT), strbuf->strbuf_pflush);
 
 	/* If the device could not have possibly put dirty data into
 	 * the streaming cache, no flush-flag synchronization needs
@@ -135,15 +85,14 @@ static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long
 	if (direction == SBUS_DMA_TODEVICE)
 		return;
 
-	iommu->strbuf_flushflag = 0UL;
+	*(strbuf->strbuf_flushflag) = 0UL;
 
 	/* Whoopee cushion! */
-	upa_writeq(__pa(&iommu->strbuf_flushflag),
-		   iommu->strbuf_regs + STRBUF_FSYNC);
-	upa_readq(iommu->sbus_control_reg);
+	upa_writeq(strbuf->strbuf_flushflag_pa, strbuf->strbuf_fsync);
+	upa_readq(iommu->write_complete_reg);
 
 	limit = 100000;
-	while (iommu->strbuf_flushflag == 0UL) {
+	while (*(strbuf->strbuf_flushflag) == 0UL) {
 		limit--;
 		if (!limit)
 			break;
@@ -156,288 +105,247 @@ static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long
 		       base, npages);
 }
 
-static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages)
+/* Based largely upon the ppc64 iommu allocator.  */
+static long sbus_arena_alloc(struct iommu *iommu, unsigned long npages)
 {
-	iopte_t *iopte, *limit, *first, *cluster;
-	unsigned long cnum, ent, nent, flush_point, found;
-
-	cnum = 0;
-	nent = 1;
-	while ((1UL << cnum) < npages)
-		cnum++;
-	if(cnum >= NCLUSTERS) {
-		nent = 1UL << (cnum - NCLUSTERS);
-		cnum = NCLUSTERS - 1;
-	}
-	iopte  = iommu->page_table + (cnum * CLUSTER_NPAGES);
-
-	if (cnum == 0)
-		limit = (iommu->page_table +
-			 iommu->lowest_consistent_map);
-	else
-		limit = (iopte + CLUSTER_NPAGES);
-
-	iopte += ((ent = iommu->alloc_info[cnum].next) << cnum);
-	flush_point = iommu->alloc_info[cnum].flush;
-
-	first = iopte;
-	cluster = NULL;
-	found = 0;
-	for (;;) {
-		if (iopte_val(*iopte) == 0UL) {
-			found++;
-			if (!cluster)
-				cluster = iopte;
+	struct iommu_arena *arena = &iommu->arena;
+	unsigned long n, i, start, end, limit;
+	int pass;
+
+	limit = arena->limit;
+	start = arena->hint;
+	pass = 0;
+
+again:
+	n = find_next_zero_bit(arena->map, limit, start);
+	end = n + npages;
+	if (unlikely(end >= limit)) {
+		if (likely(pass < 1)) {
+			limit = start;
+			start = 0;
+			__iommu_flushall(iommu);
+			pass++;
+			goto again;
 		} else {
-			/* Used cluster in the way */
-			cluster = NULL;
-			found = 0;
+			/* Scanned the whole thing, give up. */
+			return -1;
 		}
+	}
 
-		if (found == nent)
-			break;
-
-		iopte += (1 << cnum);
-		ent++;
-		if (iopte >= limit) {
-			iopte = (iommu->page_table + (cnum * CLUSTER_NPAGES));
-			ent = 0;
-
-			/* Multiple cluster allocations must not wrap */
-			cluster = NULL;
-			found = 0;
+	for (i = n; i < end; i++) {
+		if (test_bit(i, arena->map)) {
+			start = i + 1;
+			goto again;
 		}
-		if (ent == flush_point)
-			__iommu_flushall(iommu);
-		if (iopte == first)
-			goto bad;
 	}
 
-	/* ent/iopte points to the last cluster entry we're going to use,
-	 * so save our place for the next allocation.
-	 */
-	if ((iopte + (1 << cnum)) >= limit)
-		ent = 0;
-	else
-		ent = ent + 1;
-	iommu->alloc_info[cnum].next = ent;
-	if (ent == flush_point)
-		__iommu_flushall(iommu);
-
-	/* I've got your streaming cluster right here buddy boy... */
-	return cluster;
-
-bad:
-	printk(KERN_EMERG "sbus: alloc_streaming_cluster of npages(%ld) failed!\n",
-	       npages);
-	return NULL;
+	for (i = n; i < end; i++)
+		__set_bit(i, arena->map);
+
+	arena->hint = end;
+
+	return n;
 }
 
-static void free_streaming_cluster(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static void sbus_arena_free(struct iommu_arena *arena, unsigned long base, unsigned long npages)
 {
-	unsigned long cnum, ent, nent;
-	iopte_t *iopte;
+	unsigned long i;
 
-	cnum = 0;
-	nent = 1;
-	while ((1UL << cnum) < npages)
-		cnum++;
-	if(cnum >= NCLUSTERS) {
-		nent = 1UL << (cnum - NCLUSTERS);
-		cnum = NCLUSTERS - 1;
-	}
-	ent = (base & CLUSTER_MASK) >> (IO_PAGE_SHIFT + cnum);
-	iopte = iommu->page_table + ((base - MAP_BASE) >> IO_PAGE_SHIFT);
-	do {
-		iopte_val(*iopte) = 0UL;
-		iopte += 1 << cnum;
-	} while(--nent);
-
-	/* If the global flush might not have caught this entry,
-	 * adjust the flush point such that we will flush before
-	 * ever trying to reuse it.
-	 */
-#define between(X,Y,Z)	(((Z) - (Y)) >= ((X) - (Y)))
-	if (between(ent, iommu->alloc_info[cnum].next, iommu->alloc_info[cnum].flush))
-		iommu->alloc_info[cnum].flush = ent;
-#undef between
+	for (i = base; i < (base + npages); i++)
+		__clear_bit(i, arena->map);
 }
 
-/* We allocate consistent mappings from the end of cluster zero. */
-static iopte_t *alloc_consistent_cluster(struct sbus_iommu *iommu, unsigned long npages)
+static void sbus_iommu_table_init(struct iommu *iommu, unsigned int tsbsize)
 {
-	iopte_t *iopte;
+	unsigned long tsbbase, order, sz, num_tsb_entries;
 
-	iopte = iommu->page_table + (1 * CLUSTER_NPAGES);
-	while (iopte > iommu->page_table) {
-		iopte--;
-		if (!(iopte_val(*iopte) & IOPTE_VALID)) {
-			unsigned long tmp = npages;
+	num_tsb_entries = tsbsize / sizeof(iopte_t);
 
-			while (--tmp) {
-				iopte--;
-				if (iopte_val(*iopte) & IOPTE_VALID)
-					break;
-			}
-			if (tmp == 0) {
-				u32 entry = (iopte - iommu->page_table);
+	/* Setup initial software IOMMU state. */
+	spin_lock_init(&iommu->lock);
+	iommu->page_table_map_base = MAP_BASE;
+
+	/* Allocate and initialize the free area map.  */
+	sz = num_tsb_entries / 8;
+	sz = (sz + 7UL) & ~7UL;
+	iommu->arena.map = kzalloc(sz, GFP_KERNEL);
+	if (!iommu->arena.map) {
+		prom_printf("SBUS_IOMMU: Error, kmalloc(arena.map) failed.\n");
+		prom_halt();
+	}
+	iommu->arena.limit = num_tsb_entries;
 
-				if (entry < iommu->lowest_consistent_map)
-					iommu->lowest_consistent_map = entry;
-				return iopte;
-			}
-		}
+	/* Now allocate and setup the IOMMU page table itself.  */
+	order = get_order(tsbsize);
+	tsbbase = __get_free_pages(GFP_KERNEL, order);
+	if (!tsbbase) {
+		prom_printf("IOMMU: Error, gfp(tsb) failed.\n");
+		prom_halt();
 	}
-	return NULL;
+	iommu->page_table = (iopte_t *)tsbbase;
+	memset(iommu->page_table, 0, tsbsize);
 }
 
-static void free_consistent_cluster(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static inline iopte_t *alloc_npages(struct iommu *iommu, unsigned long npages)
 {
-	iopte_t *iopte = iommu->page_table + ((base - MAP_BASE) >> IO_PAGE_SHIFT);
+	long entry;
 
-	if ((iopte - iommu->page_table) == iommu->lowest_consistent_map) {
-		iopte_t *walk = iopte + npages;
-		iopte_t *limit;
+	entry = sbus_arena_alloc(iommu, npages);
+	if (unlikely(entry < 0))
+		return NULL;
 
-		limit = iommu->page_table + CLUSTER_NPAGES;
-		while (walk < limit) {
-			if (iopte_val(*walk) != 0UL)
-				break;
-			walk++;
-		}
-		iommu->lowest_consistent_map =
-			(walk - iommu->page_table);
-	}
+	return iommu->page_table + entry;
+}
 
-	while (npages--)
-		*iopte++ = __iopte(0UL);
+static inline void free_npages(struct iommu *iommu, dma_addr_t base, unsigned long npages)
+{
+	sbus_arena_free(&iommu->arena, base >> IO_PAGE_SHIFT, npages);
 }
 
 void *sbus_alloc_consistent(struct sbus_dev *sdev, size_t size, dma_addr_t *dvma_addr)
 {
-	unsigned long order, first_page, flags;
-	struct sbus_iommu *iommu;
+	struct sbus_info *info;
+	struct iommu *iommu;
 	iopte_t *iopte;
+	unsigned long flags, order, first_page;
 	void *ret;
 	int npages;
 
-	if (size <= 0 || sdev == NULL || dvma_addr == NULL)
-		return NULL;
-
 	size = IO_PAGE_ALIGN(size);
 	order = get_order(size);
 	if (order >= 10)
 		return NULL;
+
 	first_page = __get_free_pages(GFP_KERNEL|__GFP_COMP, order);
 	if (first_page == 0UL)
 		return NULL;
 	memset((char *)first_page, 0, PAGE_SIZE << order);
 
-	iommu = sdev->bus->iommu;
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	iopte = alloc_consistent_cluster(iommu, size >> IO_PAGE_SHIFT);
-	if (iopte == NULL) {
-		spin_unlock_irqrestore(&iommu->lock, flags);
+	iopte = alloc_npages(iommu, size >> IO_PAGE_SHIFT);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
+	if (unlikely(iopte == NULL)) {
 		free_pages(first_page, order);
 		return NULL;
 	}
 
-	/* Ok, we're committed at this point. */
-	*dvma_addr = MAP_BASE +	((iopte - iommu->page_table) << IO_PAGE_SHIFT);
+	*dvma_addr = (iommu->page_table_map_base +
+		      ((iopte - iommu->page_table) << IO_PAGE_SHIFT));
 	ret = (void *) first_page;
 	npages = size >> IO_PAGE_SHIFT;
+	first_page = __pa(first_page);
 	while (npages--) {
-		*iopte++ = __iopte(IOPTE_VALID | IOPTE_CACHE | IOPTE_WRITE |
-				   (__pa(first_page) & IOPTE_PAGE));
+		iopte_val(*iopte) = (IOPTE_VALID | IOPTE_CACHE |
+				     IOPTE_WRITE |
+				     (first_page & IOPTE_PAGE));
+		iopte++;
 		first_page += IO_PAGE_SIZE;
 	}
-	iommu_flush(iommu, *dvma_addr, size >> IO_PAGE_SHIFT);
-	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return ret;
 }
 
 void sbus_free_consistent(struct sbus_dev *sdev, size_t size, void *cpu, dma_addr_t dvma)
 {
-	unsigned long order, npages;
-	struct sbus_iommu *iommu;
-
-	if (size <= 0 || sdev == NULL || cpu == NULL)
-		return;
+	struct sbus_info *info;
+	struct iommu *iommu;
+	iopte_t *iopte;
+	unsigned long flags, order, npages;
 
 	npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT;
-	iommu = sdev->bus->iommu;
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
+	iopte = iommu->page_table +
+		((dvma - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
 
-	spin_lock_irq(&iommu->lock);
-	free_consistent_cluster(iommu, dvma, npages);
-	iommu_flush(iommu, dvma, npages);
-	spin_unlock_irq(&iommu->lock);
+	spin_lock_irqsave(&iommu->lock, flags);
+
+	free_npages(iommu, dvma - iommu->page_table_map_base, npages);
+
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	order = get_order(size);
 	if (order < 10)
 		free_pages((unsigned long)cpu, order);
 }
 
-dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, size_t size, int dir)
+dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, size_t sz, int direction)
 {
-	struct sbus_iommu *iommu = sdev->bus->iommu;
-	unsigned long npages, pbase, flags;
-	iopte_t *iopte;
-	u32 dma_base, offset;
-	unsigned long iopte_bits;
-
-	if (dir == SBUS_DMA_NONE)
+	struct sbus_info *info;
+	struct iommu *iommu;
+	iopte_t *base;
+	unsigned long flags, npages, oaddr;
+	unsigned long i, base_paddr;
+	u32 bus_addr, ret;
+	unsigned long iopte_protection;
+
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
+
+	if (unlikely(direction == SBUS_DMA_NONE))
 		BUG();
 
-	pbase = (unsigned long) ptr;
-	offset = (u32) (pbase & ~IO_PAGE_MASK);
-	size = (IO_PAGE_ALIGN(pbase + size) - (pbase & IO_PAGE_MASK));
-	pbase = (unsigned long) __pa(pbase & IO_PAGE_MASK);
+	oaddr = (unsigned long)ptr;
+	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
+	npages >>= IO_PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	npages = size >> IO_PAGE_SHIFT;
-	iopte = alloc_streaming_cluster(iommu, npages);
-	if (iopte == NULL)
-		goto bad;
-	dma_base = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT);
-	npages = size >> IO_PAGE_SHIFT;
-	iopte_bits = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
-	if (dir != SBUS_DMA_TODEVICE)
-		iopte_bits |= IOPTE_WRITE;
-	while (npages--) {
-		*iopte++ = __iopte(iopte_bits | (pbase & IOPTE_PAGE));
-		pbase += IO_PAGE_SIZE;
-	}
-	npages = size >> IO_PAGE_SHIFT;
+	base = alloc_npages(iommu, npages);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
-	return (dma_base | offset);
+	if (unlikely(!base))
+		BUG();
 
-bad:
-	spin_unlock_irqrestore(&iommu->lock, flags);
-	BUG();
-	return 0;
+	bus_addr = (iommu->page_table_map_base +
+		    ((base - iommu->page_table) << IO_PAGE_SHIFT));
+	ret = bus_addr | (oaddr & ~IO_PAGE_MASK);
+	base_paddr = __pa(oaddr & IO_PAGE_MASK);
+
+	iopte_protection = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
+	if (direction != SBUS_DMA_TODEVICE)
+		iopte_protection |= IOPTE_WRITE;
+
+	for (i = 0; i < npages; i++, base++, base_paddr += IO_PAGE_SIZE)
+		iopte_val(*base) = iopte_protection | base_paddr;
+
+	return ret;
 }
 
-void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, int direction)
+void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
-	struct sbus_iommu *iommu = sdev->bus->iommu;
-	u32 dma_base = dma_addr & IO_PAGE_MASK;
-	unsigned long flags;
+	struct sbus_info *info = sdev->bus->iommu;
+	struct iommu *iommu = &info->iommu;
+	struct strbuf *strbuf = &info->strbuf;
+	iopte_t *base;
+	unsigned long flags, npages, i;
+
+	if (unlikely(direction == SBUS_DMA_NONE))
+		BUG();
 
-	size = (IO_PAGE_ALIGN(dma_addr + size) - dma_base);
+	npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK);
+	npages >>= IO_PAGE_SHIFT;
+	base = iommu->page_table +
+		((bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
+
+	bus_addr &= IO_PAGE_MASK;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT);
-	sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction);
+	sbus_strbuf_flush(iommu, strbuf, bus_addr, npages, direction);
+	for (i = 0; i < npages; i++)
+		iopte_val(base[i]) = 0UL;
+	free_npages(iommu, bus_addr - iommu->page_table_map_base, npages);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
 #define SG_ENT_PHYS_ADDRESS(SG)	\
 	(__pa(page_address((SG)->page)) + (SG)->offset)
 
-static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, int nused, int nelems, unsigned long iopte_bits)
+static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg,
+			   int nused, int nelems, unsigned long iopte_protection)
 {
 	struct scatterlist *dma_sg = sg;
 	struct scatterlist *sg_end = sg + nelems;
@@ -462,7 +370,7 @@ static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, int nused, in
 			for (;;) {
 				unsigned long tmp;
 
-				tmp = (unsigned long) SG_ENT_PHYS_ADDRESS(sg);
+				tmp = SG_ENT_PHYS_ADDRESS(sg);
 				len = sg->length;
 				if (((tmp ^ pteval) >> IO_PAGE_SHIFT) != 0UL) {
 					pteval = tmp & IO_PAGE_MASK;
@@ -478,7 +386,7 @@ static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, int nused, in
 				sg++;
 			}
 
-			pteval = ((pteval & IOPTE_PAGE) | iopte_bits);
+			pteval = iopte_protection | (pteval & IOPTE_PAGE);
 			while (len > 0) {
 				*iopte++ = __iopte(pteval);
 				pteval += IO_PAGE_SIZE;
@@ -509,103 +417,121 @@ static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, int nused, in
 	}
 }
 
-int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int dir)
+int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct sbus_iommu *iommu = sdev->bus->iommu;
-	unsigned long flags, npages;
-	iopte_t *iopte;
+	struct sbus_info *info;
+	struct iommu *iommu;
+	unsigned long flags, npages, iopte_protection;
+	iopte_t *base;
 	u32 dma_base;
 	struct scatterlist *sgtmp;
 	int used;
-	unsigned long iopte_bits;
-
-	if (dir == SBUS_DMA_NONE)
-		BUG();
 
 	/* Fast path single entry scatterlists. */
-	if (nents == 1) {
-		sg->dma_address =
+	if (nelems == 1) {
+		sglist->dma_address =
 			sbus_map_single(sdev,
-					(page_address(sg->page) + sg->offset),
-					sg->length, dir);
-		sg->dma_length = sg->length;
+					(page_address(sglist->page) + sglist->offset),
+					sglist->length, direction);
+		sglist->dma_length = sglist->length;
 		return 1;
 	}
 
-	npages = prepare_sg(sg, nents);
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
+
+	if (unlikely(direction == SBUS_DMA_NONE))
+		BUG();
+
+	npages = prepare_sg(sglist, nelems);
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	iopte = alloc_streaming_cluster(iommu, npages);
-	if (iopte == NULL)
-		goto bad;
-	dma_base = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT);
+	base = alloc_npages(iommu, npages);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
+	if (unlikely(base == NULL))
+		BUG();
+
+	dma_base = iommu->page_table_map_base +
+		((base - iommu->page_table) << IO_PAGE_SHIFT);
 
 	/* Normalize DVMA addresses. */
-	sgtmp = sg;
-	used = nents;
+	used = nelems;
 
+	sgtmp = sglist;
 	while (used && sgtmp->dma_length) {
 		sgtmp->dma_address += dma_base;
 		sgtmp++;
 		used--;
 	}
-	used = nents - used;
+	used = nelems - used;
+
+	iopte_protection = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
+	if (direction != SBUS_DMA_TODEVICE)
+		iopte_protection |= IOPTE_WRITE;
 
-	iopte_bits = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE;
-	if (dir != SBUS_DMA_TODEVICE)
-		iopte_bits |= IOPTE_WRITE;
+	fill_sg(base, sglist, used, nelems, iopte_protection);
 
-	fill_sg(iopte, sg, used, nents, iopte_bits);
 #ifdef VERIFY_SG
-	verify_sglist(sg, nents, iopte, npages);
+	verify_sglist(sglist, nelems, base, npages);
 #endif
-	spin_unlock_irqrestore(&iommu->lock, flags);
 
 	return used;
-
-bad:
-	spin_unlock_irqrestore(&iommu->lock, flags);
-	BUG();
-	return 0;
 }
 
-void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction)
+void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	unsigned long size, flags;
-	struct sbus_iommu *iommu;
-	u32 dvma_base;
-	int i;
+	struct sbus_info *info;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
+	iopte_t *base;
+	unsigned long flags, i, npages;
+	u32 bus_addr;
+
+	if (unlikely(direction == SBUS_DMA_NONE))
+		BUG();
 
-	/* Fast path single entry scatterlists. */
-	if (nents == 1) {
-		sbus_unmap_single(sdev, sg->dma_address, sg->dma_length, direction);
-		return;
-	}
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
+	strbuf = &info->strbuf;
 
-	dvma_base = sg[0].dma_address & IO_PAGE_MASK;
-	for (i = 0; i < nents; i++) {
-		if (sg[i].dma_length == 0)
+	bus_addr = sglist->dma_address & IO_PAGE_MASK;
+
+	for (i = 1; i < nelems; i++)
+		if (sglist[i].dma_length == 0)
 			break;
-	}
 	i--;
-	size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - dvma_base;
+	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) -
+		  bus_addr) >> IO_PAGE_SHIFT;
+
+	base = iommu->page_table +
+		((bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
 
-	iommu = sdev->bus->iommu;
 	spin_lock_irqsave(&iommu->lock, flags);
-	free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT);
-	sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction);
+	sbus_strbuf_flush(iommu, strbuf, bus_addr, npages, direction);
+	for (i = 0; i < npages; i++)
+		iopte_val(base[i]) = 0UL;
+	free_npages(iommu, bus_addr - iommu->page_table_map_base, npages);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size, int direction)
+void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
-	struct sbus_iommu *iommu = sdev->bus->iommu;
-	unsigned long flags;
+	struct sbus_info *info;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
+	unsigned long flags, npages;
+
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
+	strbuf = &info->strbuf;
 
-	size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK));
+	npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK);
+	npages >>= IO_PAGE_SHIFT;
+	bus_addr &= IO_PAGE_MASK;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction);
+	sbus_strbuf_flush(iommu, strbuf, bus_addr, npages, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -613,23 +539,29 @@ void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t base, siz
 {
 }
 
-void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction)
+void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sglist, int nelems, int direction)
 {
-	struct sbus_iommu *iommu = sdev->bus->iommu;
-	unsigned long flags, size;
-	u32 base;
-	int i;
-
-	base = sg[0].dma_address & IO_PAGE_MASK;
-	for (i = 0; i < nents; i++) {
-		if (sg[i].dma_length == 0)
+	struct sbus_info *info;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
+	unsigned long flags, npages, i;
+	u32 bus_addr;
+
+	info = sdev->bus->iommu;
+	iommu = &info->iommu;
+	strbuf = &info->strbuf;
+
+	bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
+	for (i = 0; i < nelems; i++) {
+		if (!sglist[i].dma_length)
 			break;
 	}
 	i--;
-	size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base;
+	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length)
+		  - bus_addr) >> IO_PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction);
+	sbus_strbuf_flush(iommu, strbuf, bus_addr, npages, direction);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -640,12 +572,13 @@ void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg,
 /* Enable 64-bit DVMA mode for the given device. */
 void sbus_set_sbus64(struct sbus_dev *sdev, int bursts)
 {
-	struct sbus_iommu *iommu = sdev->bus->iommu;
+	struct sbus_info *info = sdev->bus->iommu;
+	struct iommu *iommu = &info->iommu;
 	int slot = sdev->slot;
 	unsigned long cfg_reg;
 	u64 val;
 
-	cfg_reg = iommu->sbus_control_reg;
+	cfg_reg = iommu->write_complete_reg;
 	switch (slot) {
 	case 0:
 		cfg_reg += 0x20UL;
@@ -780,8 +713,9 @@ static unsigned long sysio_imap_to_iclr(unsigned long imap)
 unsigned int sbus_build_irq(void *buscookie, unsigned int ino)
 {
 	struct sbus_bus *sbus = (struct sbus_bus *)buscookie;
-	struct sbus_iommu *iommu = sbus->iommu;
-	unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL;
+	struct sbus_info *info = sbus->iommu;
+	struct iommu *iommu = &info->iommu;
+	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long imap, iclr;
 	int sbus_level = 0;
 
@@ -842,8 +776,9 @@ unsigned int sbus_build_irq(void *buscookie, unsigned int ino)
 static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 {
 	struct sbus_bus *sbus = dev_id;
-	struct sbus_iommu *iommu = sbus->iommu;
-	unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL;
+	struct sbus_info *info = sbus->iommu;
+	struct iommu *iommu = &info->iommu;
+	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long afsr_reg, afar_reg;
 	unsigned long afsr, afar, error_bits;
 	int reported;
@@ -914,8 +849,9 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 {
 	struct sbus_bus *sbus = dev_id;
-	struct sbus_iommu *iommu = sbus->iommu;
-	unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL;
+	struct sbus_info *info = sbus->iommu;
+	struct iommu *iommu = &info->iommu;
+	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long afsr_reg, afar_reg;
 	unsigned long afsr, afar, error_bits;
 	int reported;
@@ -991,12 +927,13 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 {
 	struct sbus_bus *sbus = dev_id;
-	struct sbus_iommu *iommu = sbus->iommu;
+	struct sbus_info *info = sbus->iommu;
+	struct iommu *iommu = &info->iommu;
 	unsigned long afsr_reg, afar_reg, reg_base;
 	unsigned long afsr, afar, error_bits;
 	int reported;
 
-	reg_base = iommu->sbus_control_reg - 0x2000UL;
+	reg_base = iommu->write_complete_reg - 0x2000UL;
 	afsr_reg = reg_base + SYSIO_SBUS_AFSR;
 	afar_reg = reg_base + SYSIO_SBUS_AFAR;
 
@@ -1058,8 +995,9 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 
 static void __init sysio_register_error_handlers(struct sbus_bus *sbus)
 {
-	struct sbus_iommu *iommu = sbus->iommu;
-	unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL;
+	struct sbus_info *info = sbus->iommu;
+	struct iommu *iommu = &info->iommu;
+	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned int irq;
 	u64 control;
 
@@ -1093,18 +1031,20 @@ static void __init sysio_register_error_handlers(struct sbus_bus *sbus)
 		    SYSIO_ECNTRL_CEEN),
 		   reg_base + ECC_CONTROL);
 
-	control = upa_readq(iommu->sbus_control_reg);
+	control = upa_readq(iommu->write_complete_reg);
 	control |= 0x100UL; /* SBUS Error Interrupt Enable */
-	upa_writeq(control, iommu->sbus_control_reg);
+	upa_writeq(control, iommu->write_complete_reg);
 }
 
 /* Boot time initialization. */
 static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 {
-	struct linux_prom64_registers *pr;
+	const struct linux_prom64_registers *pr;
 	struct device_node *dp;
-	struct sbus_iommu *iommu;
-	unsigned long regs, tsb_base;
+	struct sbus_info *info;
+	struct iommu *iommu;
+	struct strbuf *strbuf;
+	unsigned long regs, reg_base;
 	u64 control;
 	int i;
 
@@ -1119,94 +1059,87 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 	}
 	regs = pr->phys_addr;
 
-	iommu = kmalloc(sizeof(*iommu) + SMP_CACHE_BYTES, GFP_ATOMIC);
-	if (iommu == NULL) {
-		prom_printf("sbus_iommu_init: Fatal error, kmalloc(iommu) failed\n");
+	info = kzalloc(sizeof(*info), GFP_ATOMIC);
+	if (info == NULL) {
+		prom_printf("sbus_iommu_init: Fatal error, "
+			    "kmalloc(info) failed\n");
 		prom_halt();
 	}
 
-	/* Align on E$ line boundary. */
-	iommu = (struct sbus_iommu *)
-		(((unsigned long)iommu + (SMP_CACHE_BYTES - 1UL)) &
-		 ~(SMP_CACHE_BYTES - 1UL));
+	iommu = &info->iommu;
+	strbuf = &info->strbuf;
 
-	memset(iommu, 0, sizeof(*iommu));
+	reg_base = regs + SYSIO_IOMMUREG_BASE;
+	iommu->iommu_control = reg_base + IOMMU_CONTROL;
+	iommu->iommu_tsbbase = reg_base + IOMMU_TSBBASE;
+	iommu->iommu_flush = reg_base + IOMMU_FLUSH;
 
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map = CLUSTER_NPAGES;
+	reg_base = regs + SYSIO_STRBUFREG_BASE;
+	strbuf->strbuf_control = reg_base + STRBUF_CONTROL;
+	strbuf->strbuf_pflush = reg_base + STRBUF_PFLUSH;
+	strbuf->strbuf_fsync = reg_base + STRBUF_FSYNC;
 
-	for (i = 0; i < NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
+	strbuf->strbuf_enabled = 1;
 
-	/* Setup spinlock. */
-	spin_lock_init(&iommu->lock);
-
-	/* Init register offsets. */
-	iommu->iommu_regs = regs + SYSIO_IOMMUREG_BASE;
-	iommu->strbuf_regs = regs + SYSIO_STRBUFREG_BASE;
+	strbuf->strbuf_flushflag = (volatile unsigned long *)
+		((((unsigned long)&strbuf->__flushflag_buf[0])
+		  + 63UL)
+		 & ~63UL);
+	strbuf->strbuf_flushflag_pa = (unsigned long)
+		__pa(strbuf->strbuf_flushflag);
 
 	/* The SYSIO SBUS control register is used for dummy reads
 	 * in order to ensure write completion.
 	 */
-	iommu->sbus_control_reg = regs + 0x2000UL;
+	iommu->write_complete_reg = regs + 0x2000UL;
 
 	/* Link into SYSIO software state. */
-	sbus->iommu = iommu;
+	sbus->iommu = info;
 
 	printk("SYSIO: UPA portID %x, at %016lx\n",
 	       sbus->portid, regs);
 
 	/* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */
-	control = upa_readq(iommu->iommu_regs + IOMMU_CONTROL);
+	sbus_iommu_table_init(iommu, IO_TSB_SIZE);
+
+	control = upa_readq(iommu->iommu_control);
 	control = ((7UL << 16UL)	|
 		   (0UL << 2UL)		|
 		   (1UL << 1UL)		|
 		   (1UL << 0UL));
-
-	/* Using the above configuration we need 1MB iommu page
-	 * table (128K ioptes * 8 bytes per iopte).  This is
-	 * page order 7 on UltraSparc.
-	 */
-	tsb_base = __get_free_pages(GFP_ATOMIC, get_order(IO_TSB_SIZE));
-	if (tsb_base == 0UL) {
-		prom_printf("sbus_iommu_init: Fatal error, cannot alloc TSB table.\n");
-		prom_halt();
-	}
-
-	iommu->page_table = (iopte_t *) tsb_base;
-	memset(iommu->page_table, 0, IO_TSB_SIZE);
-
-	upa_writeq(control, iommu->iommu_regs + IOMMU_CONTROL);
+	upa_writeq(control, iommu->iommu_control);
 
 	/* Clean out any cruft in the IOMMU using
 	 * diagnostic accesses.
 	 */
 	for (i = 0; i < 16; i++) {
-		unsigned long dram = iommu->iommu_regs + IOMMU_DRAMDIAG;
-		unsigned long tag = iommu->iommu_regs + IOMMU_TAGDIAG;
+		unsigned long dram, tag;
+
+		dram = iommu->iommu_control + (IOMMU_DRAMDIAG - IOMMU_CONTROL);
+		tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL);
 
 		dram += (unsigned long)i * 8UL;
 		tag += (unsigned long)i * 8UL;
 		upa_writeq(0, dram);
 		upa_writeq(0, tag);
 	}
-	upa_readq(iommu->sbus_control_reg);
+	upa_readq(iommu->write_complete_reg);
 
 	/* Give the TSB to SYSIO. */
-	upa_writeq(__pa(tsb_base), iommu->iommu_regs + IOMMU_TSBBASE);
+	upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase);
 
 	/* Setup streaming buffer, DE=1 SB_EN=1 */
 	control = (1UL << 1UL) | (1UL << 0UL);
-	upa_writeq(control, iommu->strbuf_regs + STRBUF_CONTROL);
+	upa_writeq(control, strbuf->strbuf_control);
 
 	/* Clear out the tags using diagnostics. */
 	for (i = 0; i < 16; i++) {
 		unsigned long ptag, ltag;
 
-		ptag = iommu->strbuf_regs + STRBUF_PTAGDIAG;
-		ltag = iommu->strbuf_regs + STRBUF_LTAGDIAG;
+		ptag = strbuf->strbuf_control +
+			(STRBUF_PTAGDIAG - STRBUF_CONTROL);
+		ltag = strbuf->strbuf_control +
+			(STRBUF_LTAGDIAG - STRBUF_CONTROL);
 		ptag += (unsigned long)i * 8UL;
 		ltag += (unsigned long)i * 8UL;
 
@@ -1215,9 +1148,9 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 	}
 
 	/* Enable DVMA arbitration for all devices/slots. */
-	control = upa_readq(iommu->sbus_control_reg);
+	control = upa_readq(iommu->write_complete_reg);
 	control |= 0x3fUL;
-	upa_writeq(control, iommu->sbus_control_reg);
+	upa_writeq(control, iommu->write_complete_reg);
 
 	/* Now some Xfire specific grot... */
 	if (this_is_starfire)
@@ -1229,7 +1162,7 @@ static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus)
 void sbus_fill_device_irq(struct sbus_dev *sdev)
 {
 	struct device_node *dp = of_find_node_by_phandle(sdev->prom_node);
-	struct linux_prom_irqs *irqs;
+	const struct linux_prom_irqs *irqs;
 
 	irqs = of_get_property(dp, "interrupts", NULL);
 	if (!irqs) {
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index fc99f7b8012f..d4f0a70f4845 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -45,7 +45,7 @@
 extern void calibrate_delay(void);
 
 /* Please don't make this stuff initdata!!!  --DaveM */
-static unsigned char boot_cpu_id;
+unsigned char boot_cpu_id;
 
 cpumask_t cpu_online_map __read_mostly = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map __read_mostly = CPU_MASK_NONE;
@@ -81,8 +81,6 @@ void __init smp_store_cpu_info(int id)
 	struct device_node *dp;
 	int def;
 
-	/* multiplier and counter set by
-	   smp_setup_percpu_timer()  */
 	cpu_data(id).udelay_val			= loops_per_jiffy;
 
 	cpu_find_by_mid(id, &dp);
@@ -125,7 +123,7 @@ void __init smp_store_cpu_info(int id)
 	       cpu_data(id).ecache_size, cpu_data(id).ecache_line_size);
 }
 
-static void smp_setup_percpu_timer(void);
+extern void setup_sparc64_timer(void);
 
 static volatile unsigned long callin_flag = 0;
 
@@ -140,7 +138,7 @@ void __init smp_callin(void)
 
 	__flush_tlb_all();
 
-	smp_setup_percpu_timer();
+	setup_sparc64_timer();
 
 	if (cheetah_pcache_forced_on)
 		cheetah_enable_pcache();
@@ -177,8 +175,6 @@ void cpu_panic(void)
 	panic("SMP bolixed\n");
 }
 
-static unsigned long current_tick_offset __read_mostly;
-
 /* This tick register synchronization scheme is taken entirely from
  * the ia64 port, see arch/ia64/kernel/smpboot.c for details and credit.
  *
@@ -261,7 +257,7 @@ void smp_synchronize_tick_client(void)
 				} else
 					adj = -delta;
 
-				tick_ops->add_tick(adj, current_tick_offset);
+				tick_ops->add_tick(adj);
 			}
 #if DEBUG_TICK_SYNC
 			t[i].rt = rt;
@@ -1180,117 +1176,15 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
 	preempt_enable();
 }
 
-#define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
-#define prof_counter(__cpu)		cpu_data(__cpu).counter
-
-void smp_percpu_timer_interrupt(struct pt_regs *regs)
-{
-	unsigned long compare, tick, pstate;
-	int cpu = smp_processor_id();
-	int user = user_mode(regs);
-	struct pt_regs *old_regs;
-
-	/*
-	 * Check for level 14 softint.
-	 */
-	{
-		unsigned long tick_mask = tick_ops->softint_mask;
-
-		if (!(get_softint() & tick_mask)) {
-			extern void handler_irq(int, struct pt_regs *);
-
-			handler_irq(14, regs);
-			return;
-		}
-		clear_softint(tick_mask);
-	}
-
-	old_regs = set_irq_regs(regs);
-	do {
-		profile_tick(CPU_PROFILING);
-		if (!--prof_counter(cpu)) {
-			irq_enter();
-
-			if (cpu == boot_cpu_id) {
-				kstat_this_cpu.irqs[0]++;
-				timer_tick_interrupt(regs);
-			}
-
-			update_process_times(user);
-
-			irq_exit();
-
-			prof_counter(cpu) = prof_multiplier(cpu);
-		}
-
-		/* Guarantee that the following sequences execute
-		 * uninterrupted.
-		 */
-		__asm__ __volatile__("rdpr	%%pstate, %0\n\t"
-				     "wrpr	%0, %1, %%pstate"
-				     : "=r" (pstate)
-				     : "i" (PSTATE_IE));
-
-		compare = tick_ops->add_compare(current_tick_offset);
-		tick = tick_ops->get_tick();
-
-		/* Restore PSTATE_IE. */
-		__asm__ __volatile__("wrpr	%0, 0x0, %%pstate"
-				     : /* no outputs */
-				     : "r" (pstate));
-	} while (time_after_eq(tick, compare));
-	set_irq_regs(old_regs);
-}
-
-static void __init smp_setup_percpu_timer(void)
-{
-	int cpu = smp_processor_id();
-	unsigned long pstate;
-
-	prof_counter(cpu) = prof_multiplier(cpu) = 1;
-
-	/* Guarantee that the following sequences execute
-	 * uninterrupted.
-	 */
-	__asm__ __volatile__("rdpr	%%pstate, %0\n\t"
-			     "wrpr	%0, %1, %%pstate"
-			     : "=r" (pstate)
-			     : "i" (PSTATE_IE));
-
-	tick_ops->init_tick(current_tick_offset);
-
-	/* Restore PSTATE_IE. */
-	__asm__ __volatile__("wrpr	%0, 0x0, %%pstate"
-			     : /* no outputs */
-			     : "r" (pstate));
-}
-
 void __init smp_tick_init(void)
 {
 	boot_cpu_id = hard_smp_processor_id();
-	current_tick_offset = timer_tick_offset;
-
-	prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
 }
 
 /* /proc/profile writes can call this, don't __init it please. */
-static DEFINE_SPINLOCK(prof_setup_lock);
-
 int setup_profiling_timer(unsigned int multiplier)
 {
-	unsigned long flags;
-	int i;
-
-	if ((!multiplier) || (timer_tick_offset / multiplier) < 1000)
-		return -EINVAL;
-
-	spin_lock_irqsave(&prof_setup_lock, flags);
-	for_each_possible_cpu(i)
-		prof_multiplier(i) = multiplier;
-	current_tick_offset = (timer_tick_offset / multiplier);
-	spin_unlock_irqrestore(&prof_setup_lock, flags);
-
-	return 0;
+	return -EINVAL;
 }
 
 static void __init smp_tune_scheduling(void)
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index beffc82a1e85..d00f51a5683f 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -212,7 +212,6 @@ EXPORT_SYMBOL(insl);
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL(ebus_chain);
 EXPORT_SYMBOL(isa_chain);
-EXPORT_SYMBOL(pci_memspace_mask);
 EXPORT_SYMBOL(pci_alloc_consistent);
 EXPORT_SYMBOL(pci_free_consistent);
 EXPORT_SYMBOL(pci_map_single);
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index c09ab4b9431d..010a737908ee 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -91,7 +91,6 @@ SIGN1(sys32_select, compat_sys_select, %o0)
 SIGN1(sys32_mkdir, sys_mkdir, %o1)
 SIGN3(sys32_futex, compat_sys_futex, %o1, %o2, %o5)
 SIGN1(sys32_sysfs, compat_sys_sysfs, %o0)
-SIGN3(sys32_ipc, compat_sys_ipc, %o1, %o2, %o3)
 SIGN2(sys32_sendfile, compat_sys_sendfile, %o0, %o1)
 SIGN2(sys32_sendfile64, compat_sys_sendfile64, %o0, %o1)
 SIGN1(sys32_prctl, sys_prctl, %o0)
diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c
index 4cff95b7b3a4..8f7a06e2c7e7 100644
--- a/arch/sparc64/kernel/sys_sunos32.c
+++ b/arch/sparc64/kernel/sys_sunos32.c
@@ -871,7 +871,7 @@ asmlinkage s32 sunos_sysconf (int name)
 		ret = ARG_MAX;
 		break;
 	case _SC_CHILD_MAX:
-		ret = -1; /* no limit */
+		ret = current->signal->rlim[RLIMIT_NPROC].rlim_cur;
 		break;
 	case _SC_CLK_TCK:
 		ret = HZ;
@@ -880,7 +880,7 @@ asmlinkage s32 sunos_sysconf (int name)
 		ret = NGROUPS_MAX;
 		break;
 	case _SC_OPEN_MAX:
-		ret = OPEN_MAX;
+		ret = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
 		break;
 	case _SC_JOB_CONTROL:
 		ret = 1;	/* yes, we do support job control */
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 948b7d2d5874..48c36fe6dc62 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -62,7 +62,7 @@ sys_call_table32:
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
 	.word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
 /*210*/	.word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo
-	.word sys32_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
+	.word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex
 /*220*/	.word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid
 	.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16
 /*230*/	.word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64
@@ -79,7 +79,8 @@ sys_call_table32:
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
 /*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
-/*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages
+/*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
+	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 
 #endif /* CONFIG_COMPAT */
 
@@ -149,7 +150,8 @@ sys_call_table:
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
-/*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages
+/*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
+	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 
 #if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
     defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -264,5 +266,8 @@ sunos_sys_table:
 	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys
 /*300*/	.word sunos_nosys, sunos_nosys, sunos_nosys
+	.word sunos_nosys, sunos_nosys, sunos_nosys
+	.word sunos_nosys, sunos_nosys, sunos_nosys
+	.word sunos_nosys
 
 #endif
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index f84da4f1b706..259063f41f95 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -31,6 +31,9 @@
 #include <linux/profile.h>
 #include <linux/miscdevice.h>
 #include <linux/rtc.h>
+#include <linux/kernel_stat.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
 
 #include <asm/oplib.h>
 #include <asm/mostek.h>
@@ -60,6 +63,7 @@ static void __iomem *mstk48t59_regs;
 static int set_rtc_mmss(unsigned long);
 
 #define TICK_PRIV_BIT	(1UL << 63)
+#define TICKCMP_IRQ_BIT	(1UL << 63)
 
 #ifdef CONFIG_SMP
 unsigned long profile_pc(struct pt_regs *regs)
@@ -93,21 +97,22 @@ static void tick_disable_protection(void)
 	: "g2");
 }
 
-static void tick_init_tick(unsigned long offset)
+static void tick_disable_irq(void)
 {
-	tick_disable_protection();
-
 	__asm__ __volatile__(
-	"	rd	%%tick, %%g1\n"
-	"	andn	%%g1, %1, %%g1\n"
 	"	ba,pt	%%xcc, 1f\n"
-	"	 add	%%g1, %0, %%g1\n"
+	"	 nop\n"
 	"	.align	64\n"
-	"1:	wr	%%g1, 0x0, %%tick_cmpr\n"
+	"1:	wr	%0, 0x0, %%tick_cmpr\n"
 	"	rd	%%tick_cmpr, %%g0"
 	: /* no outputs */
-	: "r" (offset), "r" (TICK_PRIV_BIT)
-	: "g1");
+	: "r" (TICKCMP_IRQ_BIT));
+}
+
+static void tick_init_tick(void)
+{
+	tick_disable_protection();
+	tick_disable_irq();
 }
 
 static unsigned long tick_get_tick(void)
@@ -121,20 +126,14 @@ static unsigned long tick_get_tick(void)
 	return ret & ~TICK_PRIV_BIT;
 }
 
-static unsigned long tick_get_compare(void)
+static int tick_add_compare(unsigned long adj)
 {
-	unsigned long ret;
+	unsigned long orig_tick, new_tick, new_compare;
 
-	__asm__ __volatile__("rd	%%tick_cmpr, %0\n\t"
-			     "mov	%0, %0"
-			     : "=r" (ret));
+	__asm__ __volatile__("rd	%%tick, %0"
+			     : "=r" (orig_tick));
 
-	return ret;
-}
-
-static unsigned long tick_add_compare(unsigned long adj)
-{
-	unsigned long new_compare;
+	orig_tick &= ~TICKCMP_IRQ_BIT;
 
 	/* Workaround for Spitfire Errata (#54 I think??), I discovered
 	 * this via Sun BugID 4008234, mentioned in Solaris-2.5.1 patch
@@ -145,44 +144,41 @@ static unsigned long tick_add_compare(unsigned long adj)
 	 * at the start of an I-cache line, and perform a dummy
 	 * read back from %tick_cmpr right after writing to it. -DaveM
 	 */
-	__asm__ __volatile__("rd	%%tick_cmpr, %0\n\t"
-			     "ba,pt	%%xcc, 1f\n\t"
-			     " add	%0, %1, %0\n\t"
+	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t"
+			     " add	%1, %2, %0\n\t"
 			     ".align	64\n"
 			     "1:\n\t"
 			     "wr	%0, 0, %%tick_cmpr\n\t"
-			     "rd	%%tick_cmpr, %%g0"
-			     : "=&r" (new_compare)
-			     : "r" (adj));
+			     "rd	%%tick_cmpr, %%g0\n\t"
+			     : "=r" (new_compare)
+			     : "r" (orig_tick), "r" (adj));
 
-	return new_compare;
+	__asm__ __volatile__("rd	%%tick, %0"
+			     : "=r" (new_tick));
+	new_tick &= ~TICKCMP_IRQ_BIT;
+
+	return ((long)(new_tick - (orig_tick+adj))) > 0L;
 }
 
-static unsigned long tick_add_tick(unsigned long adj, unsigned long offset)
+static unsigned long tick_add_tick(unsigned long adj)
 {
-	unsigned long new_tick, tmp;
+	unsigned long new_tick;
 
 	/* Also need to handle Blackbird bug here too. */
 	__asm__ __volatile__("rd	%%tick, %0\n\t"
-			     "add	%0, %2, %0\n\t"
+			     "add	%0, %1, %0\n\t"
 			     "wrpr	%0, 0, %%tick\n\t"
-			     "andn	%0, %4, %1\n\t"
-			     "ba,pt	%%xcc, 1f\n\t"
-			     " add	%1, %3, %1\n\t"
-			     ".align	64\n"
-			     "1:\n\t"
-			     "wr	%1, 0, %%tick_cmpr\n\t"
-			     "rd	%%tick_cmpr, %%g0"
-			     : "=&r" (new_tick), "=&r" (tmp)
-			     : "r" (adj), "r" (offset), "r" (TICK_PRIV_BIT));
+			     : "=&r" (new_tick)
+			     : "r" (adj));
 
 	return new_tick;
 }
 
 static struct sparc64_tick_ops tick_operations __read_mostly = {
+	.name		=	"tick",
 	.init_tick	=	tick_init_tick,
+	.disable_irq	=	tick_disable_irq,
 	.get_tick	=	tick_get_tick,
-	.get_compare	=	tick_get_compare,
 	.add_tick	=	tick_add_tick,
 	.add_compare	=	tick_add_compare,
 	.softint_mask	=	1UL << 0,
@@ -190,7 +186,15 @@ static struct sparc64_tick_ops tick_operations __read_mostly = {
 
 struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations;
 
-static void stick_init_tick(unsigned long offset)
+static void stick_disable_irq(void)
+{
+	__asm__ __volatile__(
+	"wr	%0, 0x0, %%asr25"
+	: /* no outputs */
+	: "r" (TICKCMP_IRQ_BIT));
+}
+
+static void stick_init_tick(void)
 {
 	/* Writes to the %tick and %stick register are not
 	 * allowed on sun4v.  The Hypervisor controls that
@@ -198,6 +202,7 @@ static void stick_init_tick(unsigned long offset)
 	 */
 	if (tlb_type != hypervisor) {
 		tick_disable_protection();
+		tick_disable_irq();
 
 		/* Let the user get at STICK too. */
 		__asm__ __volatile__(
@@ -209,14 +214,7 @@ static void stick_init_tick(unsigned long offset)
 		: "g1", "g2");
 	}
 
-	__asm__ __volatile__(
-	"	rd	%%asr24, %%g1\n"
-	"	andn	%%g1, %1, %%g1\n"
-	"	add	%%g1, %0, %%g1\n"
-	"	wr	%%g1, 0x0, %%asr25"
-	: /* no outputs */
-	: "r" (offset), "r" (TICK_PRIV_BIT)
-	: "g1");
+	stick_disable_irq();
 }
 
 static unsigned long stick_get_tick(void)
@@ -229,49 +227,43 @@ static unsigned long stick_get_tick(void)
 	return ret & ~TICK_PRIV_BIT;
 }
 
-static unsigned long stick_get_compare(void)
+static unsigned long stick_add_tick(unsigned long adj)
 {
-	unsigned long ret;
-
-	__asm__ __volatile__("rd	%%asr25, %0"
-			     : "=r" (ret));
-
-	return ret;
-}
-
-static unsigned long stick_add_tick(unsigned long adj, unsigned long offset)
-{
-	unsigned long new_tick, tmp;
+	unsigned long new_tick;
 
 	__asm__ __volatile__("rd	%%asr24, %0\n\t"
-			     "add	%0, %2, %0\n\t"
+			     "add	%0, %1, %0\n\t"
 			     "wr	%0, 0, %%asr24\n\t"
-			     "andn	%0, %4, %1\n\t"
-			     "add	%1, %3, %1\n\t"
-			     "wr	%1, 0, %%asr25"
-			     : "=&r" (new_tick), "=&r" (tmp)
-			     : "r" (adj), "r" (offset), "r" (TICK_PRIV_BIT));
+			     : "=&r" (new_tick)
+			     : "r" (adj));
 
 	return new_tick;
 }
 
-static unsigned long stick_add_compare(unsigned long adj)
+static int stick_add_compare(unsigned long adj)
 {
-	unsigned long new_compare;
+	unsigned long orig_tick, new_tick;
 
-	__asm__ __volatile__("rd	%%asr25, %0\n\t"
-			     "add	%0, %1, %0\n\t"
-			     "wr	%0, 0, %%asr25"
-			     : "=&r" (new_compare)
-			     : "r" (adj));
+	__asm__ __volatile__("rd	%%asr24, %0"
+			     : "=r" (orig_tick));
+	orig_tick &= ~TICKCMP_IRQ_BIT;
+
+	__asm__ __volatile__("wr	%0, 0, %%asr25"
+			     : /* no outputs */
+			     : "r" (orig_tick + adj));
+
+	__asm__ __volatile__("rd	%%asr24, %0"
+			     : "=r" (new_tick));
+	new_tick &= ~TICKCMP_IRQ_BIT;
 
-	return new_compare;
+	return ((long)(new_tick - (orig_tick+adj))) > 0L;
 }
 
 static struct sparc64_tick_ops stick_operations __read_mostly = {
+	.name		=	"stick",
 	.init_tick	=	stick_init_tick,
+	.disable_irq	=	stick_disable_irq,
 	.get_tick	=	stick_get_tick,
-	.get_compare	=	stick_get_compare,
 	.add_tick	=	stick_add_tick,
 	.add_compare	=	stick_add_compare,
 	.softint_mask	=	1UL << 16,
@@ -320,20 +312,6 @@ static unsigned long __hbird_read_stick(void)
 	return ret;
 }
 
-static unsigned long __hbird_read_compare(void)
-{
-	unsigned long low, high;
-	unsigned long addr = HBIRD_STICKCMP_ADDR;
-
-	__asm__ __volatile__("ldxa	[%2] %3, %0\n\t"
-			     "add	%2, 0x8, %2\n\t"
-			     "ldxa	[%2] %3, %1"
-			     : "=&r" (low), "=&r" (high), "=&r" (addr)
-			     : "i" (ASI_PHYS_BYPASS_EC_E), "2" (addr));
-
-	return (high << 32UL) | low;
-}
-
 static void __hbird_write_stick(unsigned long val)
 {
 	unsigned long low = (val & 0xffffffffUL);
@@ -364,10 +342,13 @@ static void __hbird_write_compare(unsigned long val)
 			       "i" (ASI_PHYS_BYPASS_EC_E));
 }
 
-static void hbtick_init_tick(unsigned long offset)
+static void hbtick_disable_irq(void)
 {
-	unsigned long val;
+	__hbird_write_compare(TICKCMP_IRQ_BIT);
+}
 
+static void hbtick_init_tick(void)
+{
 	tick_disable_protection();
 
 	/* XXX This seems to be necessary to 'jumpstart' Hummingbird
@@ -377,8 +358,7 @@ static void hbtick_init_tick(unsigned long offset)
 	 */
 	__hbird_write_stick(__hbird_read_stick());
 
-	val = __hbird_read_stick() & ~TICK_PRIV_BIT;
-	__hbird_write_compare(val + offset);
+	hbtick_disable_irq();
 }
 
 static unsigned long hbtick_get_tick(void)
@@ -386,122 +366,95 @@ static unsigned long hbtick_get_tick(void)
 	return __hbird_read_stick() & ~TICK_PRIV_BIT;
 }
 
-static unsigned long hbtick_get_compare(void)
-{
-	return __hbird_read_compare();
-}
-
-static unsigned long hbtick_add_tick(unsigned long adj, unsigned long offset)
+static unsigned long hbtick_add_tick(unsigned long adj)
 {
 	unsigned long val;
 
 	val = __hbird_read_stick() + adj;
 	__hbird_write_stick(val);
 
-	val &= ~TICK_PRIV_BIT;
-	__hbird_write_compare(val + offset);
-
 	return val;
 }
 
-static unsigned long hbtick_add_compare(unsigned long adj)
+static int hbtick_add_compare(unsigned long adj)
 {
-	unsigned long val = __hbird_read_compare() + adj;
+	unsigned long val = __hbird_read_stick();
+	unsigned long val2;
 
-	val &= ~TICK_PRIV_BIT;
+	val &= ~TICKCMP_IRQ_BIT;
+	val += adj;
 	__hbird_write_compare(val);
 
-	return val;
+	val2 = __hbird_read_stick() & ~TICKCMP_IRQ_BIT;
+
+	return ((long)(val2 - val)) > 0L;
 }
 
 static struct sparc64_tick_ops hbtick_operations __read_mostly = {
+	.name		=	"hbtick",
 	.init_tick	=	hbtick_init_tick,
+	.disable_irq	=	hbtick_disable_irq,
 	.get_tick	=	hbtick_get_tick,
-	.get_compare	=	hbtick_get_compare,
 	.add_tick	=	hbtick_add_tick,
 	.add_compare	=	hbtick_add_compare,
 	.softint_mask	=	1UL << 0,
 };
 
-/* timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- *
- * NOTE: On SUN5 systems the ticker interrupt comes in using 2
- *       interrupts, one at level14 and one with softint bit 0.
- */
-unsigned long timer_tick_offset __read_mostly;
-
 static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-static inline void timer_check_rtc(void)
-{
-	/* last time the cmos clock got updated */
-	static long last_rtc_update;
-
-	/* Determine when to update the Mostek clock. */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			last_rtc_update = xtime.tv_sec - 600;
-			/* do it again in 60 s */
-	}
-}
+#define USEC_AFTER	500000
+#define USEC_BEFORE	500000
 
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned long ticks, compare, pstate;
+static void sync_cmos_clock(unsigned long dummy);
 
-	write_seqlock(&xtime_lock);
+static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0);
 
-	do {
-#ifndef CONFIG_SMP
-		profile_tick(CPU_PROFILING);
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-		do_timer(1);
+static void sync_cmos_clock(unsigned long dummy)
+{
+	struct timeval now, next;
+	int fail = 1;
 
-		/* Guarantee that the following sequences execute
-		 * uninterrupted.
+	/*
+	 * If we have an externally synchronized Linux clock, then update
+	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+	 * called as close as possible to 500 ms before the new second starts.
+	 * This code is run on a timer.  If the clock is set, that timer
+	 * may not expire at the correct time.  Thus, we adjust...
+	 */
+	if (!ntp_synced())
+		/*
+		 * Not synced, exit, do not restart a timer (if one is
+		 * running, let it run out).
 		 */
-		__asm__ __volatile__("rdpr	%%pstate, %0\n\t"
-				     "wrpr	%0, %1, %%pstate"
-				     : "=r" (pstate)
-				     : "i" (PSTATE_IE));
+		return;
 
-		compare = tick_ops->add_compare(timer_tick_offset);
-		ticks = tick_ops->get_tick();
+	do_gettimeofday(&now);
+	if (now.tv_usec >= USEC_AFTER - ((unsigned) TICK_SIZE) / 2 &&
+	    now.tv_usec <= USEC_BEFORE + ((unsigned) TICK_SIZE) / 2)
+		fail = set_rtc_mmss(now.tv_sec);
 
-		/* Restore PSTATE_IE. */
-		__asm__ __volatile__("wrpr	%0, 0x0, %%pstate"
-				     : /* no outputs */
-				     : "r" (pstate));
-	} while (time_after_eq(ticks, compare));
+	next.tv_usec = USEC_AFTER - now.tv_usec;
+	if (next.tv_usec <= 0)
+		next.tv_usec += USEC_PER_SEC;
 
-	timer_check_rtc();
+	if (!fail)
+		next.tv_sec = 659;
+	else
+		next.tv_sec = 0;
 
-	write_sequnlock(&xtime_lock);
-
-	return IRQ_HANDLED;
+	if (next.tv_usec >= USEC_PER_SEC) {
+		next.tv_sec++;
+		next.tv_usec -= USEC_PER_SEC;
+	}
+	mod_timer(&sync_cmos_timer, jiffies + timeval_to_jiffies(&next));
 }
 
-#ifdef CONFIG_SMP
-void timer_tick_interrupt(struct pt_regs *regs)
+void notify_arch_cmos_timer(void)
 {
-	write_seqlock(&xtime_lock);
-
-	do_timer(1);
-
-	timer_check_rtc();
-
-	write_sequnlock(&xtime_lock);
+	mod_timer(&sync_cmos_timer, jiffies + 1);
 }
-#endif
 
 /* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */
 static void __init kick_start_clock(void)
@@ -751,7 +704,7 @@ retry:
 	return -EOPNOTSUPP;
 }
 
-static int __init clock_model_matches(char *model)
+static int __init clock_model_matches(const char *model)
 {
 	if (strcmp(model, "mk48t02") &&
 	    strcmp(model, "mk48t08") &&
@@ -768,7 +721,7 @@ static int __init clock_model_matches(char *model)
 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->node;
-	char *model = of_get_property(dp, "model", NULL);
+	const char *model = of_get_property(dp, "model", NULL);
 	unsigned long size, flags;
 	void __iomem *regs;
 
@@ -900,7 +853,6 @@ static unsigned long sparc64_init_timers(void)
 		prop = of_find_property(dp, "stick-frequency", NULL);
 	}
 	clock = *(unsigned int *) prop->value;
-	timer_tick_offset = clock / HZ;
 
 #ifdef CONFIG_SMP
 	smp_tick_init();
@@ -909,26 +861,6 @@ static unsigned long sparc64_init_timers(void)
 	return clock;
 }
 
-static void sparc64_start_timers(void)
-{
-	unsigned long pstate;
-
-	/* Guarantee that the following sequences execute
-	 * uninterrupted.
-	 */
-	__asm__ __volatile__("rdpr	%%pstate, %0\n\t"
-			     "wrpr	%0, %1, %%pstate"
-			     : "=r" (pstate)
-			     : "i" (PSTATE_IE));
-
-	tick_ops->init_tick(timer_tick_offset);
-
-	/* Restore PSTATE_IE. */
-	__asm__ __volatile__("wrpr	%0, 0x0, %%pstate"
-			     : /* no outputs */
-			     : "r" (pstate));
-}
-
 struct freq_table {
 	unsigned long clock_tick_ref;
 	unsigned int ref_freq;
@@ -975,29 +907,148 @@ static struct notifier_block sparc64_cpufreq_notifier_block = {
 
 #endif /* CONFIG_CPU_FREQ */
 
-static struct time_interpolator sparc64_cpu_interpolator = {
-	.source		=	TIME_SOURCE_CPU,
-	.shift		=	16,
-	.mask		=	0xffffffffffffffffLL
+static int sparc64_next_event(unsigned long delta,
+			      struct clock_event_device *evt)
+{
+	return tick_ops->add_compare(delta) ? -ETIME : 0;
+}
+
+static void sparc64_timer_setup(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		tick_ops->disable_irq();
+		break;
+
+	case CLOCK_EVT_MODE_PERIODIC:
+	case CLOCK_EVT_MODE_UNUSED:
+		WARN_ON(1);
+		break;
+	};
+}
+
+static struct clock_event_device sparc64_clockevent = {
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= sparc64_timer_setup,
+	.set_next_event	= sparc64_next_event,
+	.rating		= 100,
+	.shift		= 30,
+	.irq		= -1,
 };
+static DEFINE_PER_CPU(struct clock_event_device, sparc64_events);
 
-/* The quotient formula is taken from the IA64 port. */
-#define SPARC64_NSEC_PER_CYC_SHIFT	10UL
-void __init time_init(void)
+void timer_interrupt(int irq, struct pt_regs *regs)
 {
-	unsigned long clock = sparc64_init_timers();
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	unsigned long tick_mask = tick_ops->softint_mask;
+	int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(sparc64_events, cpu);
+
+	clear_softint(tick_mask);
+
+	irq_enter();
 
-	sparc64_cpu_interpolator.frequency = clock;
-	register_time_interpolator(&sparc64_cpu_interpolator);
+	kstat_this_cpu.irqs[0]++;
 
-	/* Now that the interpolator is registered, it is
-	 * safe to start the timer ticking.
+	if (unlikely(!evt->event_handler)) {
+		printk(KERN_WARNING
+		       "Spurious SPARC64 timer interrupt on cpu %d\n", cpu);
+	} else
+		evt->event_handler(evt);
+
+	irq_exit();
+
+	set_irq_regs(old_regs);
+}
+
+void __devinit setup_sparc64_timer(void)
+{
+	struct clock_event_device *sevt;
+	unsigned long pstate;
+
+	/* Guarantee that the following sequences execute
+	 * uninterrupted.
 	 */
-	sparc64_start_timers();
+	__asm__ __volatile__("rdpr	%%pstate, %0\n\t"
+			     "wrpr	%0, %1, %%pstate"
+			     : "=r" (pstate)
+			     : "i" (PSTATE_IE));
+
+	tick_ops->init_tick();
+
+	/* Restore PSTATE_IE. */
+	__asm__ __volatile__("wrpr	%0, 0x0, %%pstate"
+			     : /* no outputs */
+			     : "r" (pstate));
+
+	sevt = &__get_cpu_var(sparc64_events);
+
+	memcpy(sevt, &sparc64_clockevent, sizeof(*sevt));
+	sevt->cpumask = cpumask_of_cpu(smp_processor_id());
+
+	clockevents_register_device(sevt);
+}
+
+#define SPARC64_NSEC_PER_CYC_SHIFT	32UL
+
+static struct clocksource clocksource_tick = {
+	.rating		= 100,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.shift		= 16,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init setup_clockevent_multiplier(unsigned long hz)
+{
+	unsigned long mult, shift = 32;
+
+	while (1) {
+		mult = div_sc(hz, NSEC_PER_SEC, shift);
+		if (mult && (mult >> 32UL) == 0UL)
+			break;
+
+		shift--;
+	}
+
+	sparc64_clockevent.shift = shift;
+	sparc64_clockevent.mult = mult;
+}
+
+void __init time_init(void)
+{
+	unsigned long clock = sparc64_init_timers();
 
 	timer_ticks_per_nsec_quotient =
-		(((NSEC_PER_SEC << SPARC64_NSEC_PER_CYC_SHIFT) +
-		  (clock / 2)) / clock);
+		clocksource_hz2mult(clock, SPARC64_NSEC_PER_CYC_SHIFT);
+
+	clocksource_tick.name = tick_ops->name;
+	clocksource_tick.mult =
+		clocksource_hz2mult(clock,
+				    clocksource_tick.shift);
+	clocksource_tick.read = tick_ops->get_tick;
+
+	printk("clocksource: mult[%x] shift[%d]\n",
+	       clocksource_tick.mult, clocksource_tick.shift);
+
+	clocksource_register(&clocksource_tick);
+
+	sparc64_clockevent.name = tick_ops->name;
+
+	setup_clockevent_multiplier(clock);
+
+	sparc64_clockevent.max_delta_ns =
+		clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent);
+	sparc64_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xF, &sparc64_clockevent);
+
+	printk("clockevent: mult[%lx] shift[%d]\n",
+	       sparc64_clockevent.mult, sparc64_clockevent.shift);
+
+	setup_sparc64_timer();
 
 #ifdef CONFIG_CPU_FREQ
 	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
@@ -1126,10 +1177,6 @@ static int set_rtc_mmss(unsigned long nowtime)
 #define RTC_IS_OPEN		0x01	/* means /dev/rtc is in use	*/
 static unsigned char mini_rtc_status;	/* bitmapped status byte.	*/
 
-/* months start at 0 now */
-static unsigned char days_in_mo[] =
-{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
-
 #define FEBRUARY	2
 #define	STARTOFTIME	1970
 #define SECDAY		86400L
@@ -1278,8 +1325,7 @@ static int mini_rtc_ioctl(struct inode *inode, struct file *file,
 
 	case RTC_SET_TIME:	/* Set the RTC */
 	    {
-		int year;
-		unsigned char leap_yr;
+		int year, days;
 
 		if (!capable(CAP_SYS_TIME))
 			return -EACCES;
@@ -1288,14 +1334,14 @@ static int mini_rtc_ioctl(struct inode *inode, struct file *file,
 			return -EFAULT;
 
 		year = wtime.tm_year + 1900;
-		leap_yr = ((!(year % 4) && (year % 100)) ||
-			   !(year % 400));
+		days = month_days[wtime.tm_mon] +
+		       ((wtime.tm_mon == 1) && leapyear(year));
 
-		if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) || (wtime.tm_mday < 1))
+		if ((wtime.tm_mon < 0 || wtime.tm_mon > 11) ||
+		    (wtime.tm_mday < 1))
 			return -EINVAL;
 
-		if (wtime.tm_mday < 0 || wtime.tm_mday >
-		    (days_in_mo[wtime.tm_mon] + ((wtime.tm_mon == 1) && leap_yr)))
+		if (wtime.tm_mday < 0 || wtime.tm_mday > days)
 			return -EINVAL;
 
 		if (wtime.tm_hour < 0 || wtime.tm_hour >= 24 ||
diff --git a/arch/sparc64/kernel/tsb.S b/arch/sparc64/kernel/tsb.S
index eedf94fa5664..10adb2fb8ffe 100644
--- a/arch/sparc64/kernel/tsb.S
+++ b/arch/sparc64/kernel/tsb.S
@@ -546,6 +546,7 @@ NGtsb_init:
 	subcc		%o1, 0x100, %o1
 	bne,pt		%xcc, 1b
 	 add		%o0, 0x100, %o0
+	membar		#Sync
 	retl
 	 wr		%g2, 0x0, %asi
 	.size		NGtsb_init, .-NGtsb_init
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index d7d2a8bdc66e..7575aa371da8 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -60,11 +60,7 @@ tl0_irq4:	BTRAP(0x44)
 tl0_irq5:	TRAP_IRQ(handler_irq, 5)
 tl0_irq6:	BTRAP(0x46) BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
 tl0_irq10:	BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
-#ifndef CONFIG_SMP
-tl0_irq14:	TRAP_IRQ(timer_irq, 14)
-#else
-tl0_irq14:	TICK_SMP_IRQ
-#endif
+tl0_irq14:	TRAP_IRQ(timer_interrupt, 14)
 tl0_irq15:	TRAP_IRQ(handler_irq, 15)
 tl0_resv050:	BTRAP(0x50) BTRAP(0x51) BTRAP(0x52) BTRAP(0x53) BTRAP(0x54) BTRAP(0x55)
 tl0_resv056:	BTRAP(0x56) BTRAP(0x57) BTRAP(0x58) BTRAP(0x59) BTRAP(0x5a) BTRAP(0x5b)
diff --git a/arch/sparc64/lib/NGbzero.S b/arch/sparc64/lib/NGbzero.S
index e86baece5cc8..f10e4529ee37 100644
--- a/arch/sparc64/lib/NGbzero.S
+++ b/arch/sparc64/lib/NGbzero.S
@@ -88,6 +88,7 @@ NGbzero_loop:
 	bne,pt		%xcc, NGbzero_loop
 	 add		%o0, 64, %o0
 
+	membar		#Sync
 	wr		%o4, 0x0, %asi
 	brz,pn		%o1, NGbzero_done
 NGbzero_medium:
diff --git a/arch/sparc64/lib/NGmemcpy.S b/arch/sparc64/lib/NGmemcpy.S
index 8e522b3dc095..66063a9a66b8 100644
--- a/arch/sparc64/lib/NGmemcpy.S
+++ b/arch/sparc64/lib/NGmemcpy.S
@@ -247,6 +247,8 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	/* fall through */
 
 60:	
+	membar		#Sync
+
 	/* %o2 contains any final bytes still needed to be copied
 	 * over. If anything is left, we copy it one byte at a time.
 	 */
diff --git a/arch/sparc64/lib/NGpage.S b/arch/sparc64/lib/NGpage.S
index 7d7c3bb8dcbf..8ce3a0c9c537 100644
--- a/arch/sparc64/lib/NGpage.S
+++ b/arch/sparc64/lib/NGpage.S
@@ -41,6 +41,7 @@ NGcopy_user_page:	/* %o0=dest, %o1=src, %o2=vaddr */
 	subcc		%g7, 64, %g7
 	bne,pt		%xcc, 1b
 	 add		%o0, 32, %o0
+	membar		#Sync
 	retl
 	 nop
 
@@ -63,6 +64,7 @@ NGclear_user_page:	/* %o0=dest, %o1=vaddr */
 	subcc		%g7, 64, %g7
 	bne,pt		%xcc, 1b
 	 add		%o0, 32, %o0
+	membar		#Sync
 	retl
 	 nop
 
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index 33fd0b265e70..00677b5e1d7d 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -248,6 +248,7 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 	if (!pte_present(*ptep) && pte_present(entry))
 		mm->context.huge_pte_count++;
 
+	addr &= HPAGE_MASK;
 	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
 		set_pte_at(mm, addr, ptep, entry);
 		ptep++;
@@ -266,6 +267,8 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 	if (pte_present(entry))
 		mm->context.huge_pte_count--;
 
+	addr &= HPAGE_MASK;
+
 	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
 		pte_clear(mm, addr, ptep);
 		addr += PAGE_SIZE;
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index b1a1ee0cc6bd..cafadcbcdf38 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -59,8 +59,10 @@ unsigned long kern_linear_pte_xor[2] __read_mostly;
  */
 unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)];
 
+#ifndef CONFIG_DEBUG_PAGEALLOC
 /* A special kernel TSB for 4MB and 256MB linear mappings.  */
 struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES];
+#endif
 
 #define MAX_BANKS	32
 
@@ -120,24 +122,19 @@ static void __init read_obp_memory(const char *property,
 				size = 0UL;
 			base = new_base;
 		}
-		regs[i].phys_addr = base;
-		regs[i].reg_size = size;
-	}
-
-	for (i = 0; i < ents; i++) {
-		if (regs[i].reg_size == 0UL) {
-			int j;
-
-			for (j = i; j < ents - 1; j++) {
-				regs[j].phys_addr =
-					regs[j+1].phys_addr;
-				regs[j].reg_size =
-					regs[j+1].reg_size;
-			}
-
-			ents--;
+		if (size == 0UL) {
+			/* If it is empty, simply get rid of it.
+			 * This simplifies the logic of the other
+			 * functions that process these arrays.
+			 */
+			memmove(&regs[i], &regs[i + 1],
+				(ents - i - 1) * sizeof(regs[0]));
 			i--;
+			ents--;
+			continue;
 		}
+		regs[i].phys_addr = base;
+		regs[i].reg_size = size;
 	}
 
 	*num_ents = ents;
@@ -152,15 +149,6 @@ unsigned long *sparc64_valid_addr_bitmap __read_mostly;
 unsigned long kern_base __read_mostly;
 unsigned long kern_size __read_mostly;
 
-/* get_new_mmu_context() uses "cache + 1".  */
-DEFINE_SPINLOCK(ctx_alloc_lock);
-unsigned long tlb_context_cache = CTX_FIRST_VERSION - 1;
-#define CTX_BMAP_SLOTS (1UL << (CTX_NR_BITS - 6))
-unsigned long mmu_context_bmap[CTX_BMAP_SLOTS];
-
-/* References to special section boundaries */
-extern char  _start[], _end[];
-
 /* Initial ramdisk setup */
 extern unsigned long sparc_ramdisk_image64;
 extern unsigned int sparc_ramdisk_image;
@@ -404,19 +392,70 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 	if (tlb_type == spitfire) {
 		unsigned long kaddr;
 
-		for (kaddr = start; kaddr < end; kaddr += PAGE_SIZE)
-			__flush_icache_page(__get_phys(kaddr));
+		/* This code only runs on Spitfire cpus so this is
+		 * why we can assume _PAGE_PADDR_4U.
+		 */
+		for (kaddr = start; kaddr < end; kaddr += PAGE_SIZE) {
+			unsigned long paddr, mask = _PAGE_PADDR_4U;
+
+			if (kaddr >= PAGE_OFFSET)
+				paddr = kaddr & mask;
+			else {
+				pgd_t *pgdp = pgd_offset_k(kaddr);
+				pud_t *pudp = pud_offset(pgdp, kaddr);
+				pmd_t *pmdp = pmd_offset(pudp, kaddr);
+				pte_t *ptep = pte_offset_kernel(pmdp, kaddr);
+
+				paddr = pte_val(*ptep) & mask;
+			}
+			__flush_icache_page(paddr);
+		}
 	}
 }
 
 void show_mem(void)
 {
-	printk("Mem-info:\n");
+	unsigned long total = 0, reserved = 0;
+	unsigned long shared = 0, cached = 0;
+	pg_data_t *pgdat;
+
+	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n",
+	printk(KERN_INFO "Free swap:       %6ldkB\n",
 	       nr_swap_pages << (PAGE_SHIFT-10));
-	printk("%ld pages of RAM\n", num_physpages);
-	printk("%lu free pages\n", nr_free_pages());
+	for_each_online_pgdat(pgdat) {
+		unsigned long i, flags;
+
+		pgdat_resize_lock(pgdat, &flags);
+		for (i = 0; i < pgdat->node_spanned_pages; i++) {
+			struct page *page = pgdat_page_nr(pgdat, i);
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (page_count(page))
+				shared += page_count(page) - 1;
+		}
+		pgdat_resize_unlock(pgdat, &flags);
+	}
+
+	printk(KERN_INFO "%lu pages of RAM\n", total);
+	printk(KERN_INFO "%lu reserved pages\n", reserved);
+	printk(KERN_INFO "%lu pages shared\n", shared);
+	printk(KERN_INFO "%lu pages swap cached\n", cached);
+
+	printk(KERN_INFO "%lu pages dirty\n",
+	       global_page_state(NR_FILE_DIRTY));
+	printk(KERN_INFO "%lu pages writeback\n",
+	       global_page_state(NR_WRITEBACK));
+	printk(KERN_INFO "%lu pages mapped\n",
+	       global_page_state(NR_FILE_MAPPED));
+	printk(KERN_INFO "%lu pages slab\n",
+		global_page_state(NR_SLAB_RECLAIMABLE) +
+		global_page_state(NR_SLAB_UNRECLAIMABLE));
+	printk(KERN_INFO "%lu pages pagetables\n",
+	       global_page_state(NR_PAGETABLE));
 }
 
 void mmu_info(struct seq_file *m)
@@ -656,6 +695,13 @@ void __flush_dcache_range(unsigned long start, unsigned long end)
 }
 #endif /* DCACHE_ALIASING_POSSIBLE */
 
+/* get_new_mmu_context() uses "cache + 1".  */
+DEFINE_SPINLOCK(ctx_alloc_lock);
+unsigned long tlb_context_cache = CTX_FIRST_VERSION - 1;
+#define MAX_CTX_NR	(1UL << CTX_NR_BITS)
+#define CTX_BMAP_SLOTS	BITS_TO_LONGS(MAX_CTX_NR)
+DECLARE_BITMAP(mmu_context_bmap, MAX_CTX_NR);
+
 /* Caller does TLB context flushing on local CPU if necessary.
  * The caller also ensures that CTX_VALID(mm->context) is false.
  *
@@ -715,95 +761,6 @@ out:
 		smp_new_mmu_context_version();
 }
 
-void sparc_ultra_dump_itlb(void)
-{
-        int slot;
-
-	if (tlb_type == spitfire) {
-		printk ("Contents of itlb: ");
-		for (slot = 0; slot < 14; slot++) printk ("    ");
-		printk ("%2x:%016lx,%016lx\n",
-			0,
-			spitfire_get_itlb_tag(0), spitfire_get_itlb_data(0));
-		for (slot = 1; slot < 64; slot+=3) {
-			printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx %2x:%016lx,%016lx\n", 
-				slot,
-				spitfire_get_itlb_tag(slot), spitfire_get_itlb_data(slot),
-				slot+1,
-				spitfire_get_itlb_tag(slot+1), spitfire_get_itlb_data(slot+1),
-				slot+2,
-				spitfire_get_itlb_tag(slot+2), spitfire_get_itlb_data(slot+2));
-		}
-	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
-		printk ("Contents of itlb0:\n");
-		for (slot = 0; slot < 16; slot+=2) {
-			printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx\n",
-				slot,
-				cheetah_get_litlb_tag(slot), cheetah_get_litlb_data(slot),
-				slot+1,
-				cheetah_get_litlb_tag(slot+1), cheetah_get_litlb_data(slot+1));
-		}
-		printk ("Contents of itlb2:\n");
-		for (slot = 0; slot < 128; slot+=2) {
-			printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx\n",
-				slot,
-				cheetah_get_itlb_tag(slot), cheetah_get_itlb_data(slot),
-				slot+1,
-				cheetah_get_itlb_tag(slot+1), cheetah_get_itlb_data(slot+1));
-		}
-	}
-}
-
-void sparc_ultra_dump_dtlb(void)
-{
-        int slot;
-
-	if (tlb_type == spitfire) {
-		printk ("Contents of dtlb: ");
-		for (slot = 0; slot < 14; slot++) printk ("    ");
-		printk ("%2x:%016lx,%016lx\n", 0,
-			spitfire_get_dtlb_tag(0), spitfire_get_dtlb_data(0));
-		for (slot = 1; slot < 64; slot+=3) {
-			printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx %2x:%016lx,%016lx\n", 
-				slot,
-				spitfire_get_dtlb_tag(slot), spitfire_get_dtlb_data(slot),
-				slot+1,
-				spitfire_get_dtlb_tag(slot+1), spitfire_get_dtlb_data(slot+1),
-				slot+2,
-				spitfire_get_dtlb_tag(slot+2), spitfire_get_dtlb_data(slot+2));
-		}
-	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
-		printk ("Contents of dtlb0:\n");
-		for (slot = 0; slot < 16; slot+=2) {
-			printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx\n",
-				slot,
-				cheetah_get_ldtlb_tag(slot), cheetah_get_ldtlb_data(slot),
-				slot+1,
-				cheetah_get_ldtlb_tag(slot+1), cheetah_get_ldtlb_data(slot+1));
-		}
-		printk ("Contents of dtlb2:\n");
-		for (slot = 0; slot < 512; slot+=2) {
-			printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx\n",
-				slot,
-				cheetah_get_dtlb_tag(slot, 2), cheetah_get_dtlb_data(slot, 2),
-				slot+1,
-				cheetah_get_dtlb_tag(slot+1, 2), cheetah_get_dtlb_data(slot+1, 2));
-		}
-		if (tlb_type == cheetah_plus) {
-			printk ("Contents of dtlb3:\n");
-			for (slot = 0; slot < 512; slot+=2) {
-				printk ("%2x:%016lx,%016lx %2x:%016lx,%016lx\n",
-					slot,
-					cheetah_get_dtlb_tag(slot, 3), cheetah_get_dtlb_data(slot, 3),
-					slot+1,
-					cheetah_get_dtlb_tag(slot+1, 3), cheetah_get_dtlb_data(slot+1, 3));
-			}
-		}
-	}
-}
-
-extern unsigned long cmdline_memory_size;
-
 /* Find a free area for the bootmem map, avoiding the kernel image
  * and the initial ramdisk.
  */
@@ -813,8 +770,8 @@ static unsigned long __init choose_bootmap_pfn(unsigned long start_pfn,
 	unsigned long avoid_start, avoid_end, bootmap_size;
 	int i;
 
-	bootmap_size = ((end_pfn - start_pfn) + 7) / 8;
-	bootmap_size = ALIGN(bootmap_size, sizeof(long));
+	bootmap_size = bootmem_bootmap_pages(end_pfn - start_pfn);
+	bootmap_size <<= PAGE_SHIFT;
 
 	avoid_start = avoid_end = 0;
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -981,6 +938,20 @@ static void __init trim_pavail(unsigned long *cur_size_p,
 	}
 }
 
+/* About pages_avail, this is the value we will use to calculate
+ * the zholes_size[] argument given to free_area_init_node().  The
+ * page allocator uses this to calculate nr_kernel_pages,
+ * nr_all_pages and zone->present_pages.  On NUMA it is used
+ * to calculate zone->min_unmapped_pages and zone->min_slab_pages.
+ *
+ * So this number should really be set to what the page allocator
+ * actually ends up with.  This means:
+ * 1) It should include bootmem map pages, we'll release those.
+ * 2) It should not include the kernel image, except for the
+ *    __init sections which we will also release.
+ * 3) It should include the initrd image, since we'll release
+ *    that too.
+ */
 static unsigned long __init bootmem_init(unsigned long *pages_avail,
 					 unsigned long phys_base)
 {
@@ -1067,7 +1038,6 @@ static unsigned long __init bootmem_init(unsigned long *pages_avail,
 			initrd_start, initrd_end);
 #endif
 		reserve_bootmem(initrd_start, size);
-		*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
 
 		initrd_start += PAGE_OFFSET;
 		initrd_end += PAGE_OFFSET;
@@ -1080,6 +1050,11 @@ static unsigned long __init bootmem_init(unsigned long *pages_avail,
 	reserve_bootmem(kern_base, kern_size);
 	*pages_avail -= PAGE_ALIGN(kern_size) >> PAGE_SHIFT;
 
+	/* Add back in the initmem pages. */
+	size = ((unsigned long)(__init_end) & PAGE_MASK) -
+		PAGE_ALIGN((unsigned long)__init_begin);
+	*pages_avail += size >> PAGE_SHIFT;
+
 	/* Reserve the bootmem map.   We do not account for it
 	 * in pages_avail because we will release that memory
 	 * in free_all_bootmem.
@@ -1090,7 +1065,6 @@ static unsigned long __init bootmem_init(unsigned long *pages_avail,
 		    (bootmap_pfn << PAGE_SHIFT), size);
 #endif
 	reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size);
-	*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
 
 	for (i = 0; i < pavail_ents; i++) {
 		unsigned long start_pfn, end_pfn;
@@ -1301,7 +1275,12 @@ static void __init tsb_phys_patch(void)
 }
 
 /* Don't mark as init, we give this to the Hypervisor.  */
-static struct hv_tsb_descr ktsb_descr[2];
+#ifndef CONFIG_DEBUG_PAGEALLOC
+#define NUM_KTSB_DESCR	2
+#else
+#define NUM_KTSB_DESCR	1
+#endif
+static struct hv_tsb_descr ktsb_descr[NUM_KTSB_DESCR];
 extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES];
 
 static void __init sun4v_ktsb_init(void)
@@ -1340,6 +1319,7 @@ static void __init sun4v_ktsb_init(void)
 	ktsb_descr[0].tsb_base = ktsb_pa;
 	ktsb_descr[0].resv = 0;
 
+#ifndef CONFIG_DEBUG_PAGEALLOC
 	/* Second KTSB for 4MB/256MB mappings.  */
 	ktsb_pa = (kern_base +
 		   ((unsigned long)&swapper_4m_tsb[0] - KERNBASE));
@@ -1352,6 +1332,7 @@ static void __init sun4v_ktsb_init(void)
 	ktsb_descr[1].ctx_idx = 0;
 	ktsb_descr[1].tsb_base = ktsb_pa;
 	ktsb_descr[1].resv = 0;
+#endif
 }
 
 void __cpuinit sun4v_ktsb_register(void)
@@ -1364,7 +1345,7 @@ void __cpuinit sun4v_ktsb_register(void)
 	pa = kern_base + ((unsigned long)&ktsb_descr[0] - KERNBASE);
 
 	func = HV_FAST_MMU_TSB_CTX0;
-	arg0 = 2;
+	arg0 = NUM_KTSB_DESCR;
 	arg1 = pa;
 	__asm__ __volatile__("ta	%6"
 			     : "=&r" (func), "=&r" (arg0), "=&r" (arg1)
@@ -1393,7 +1374,9 @@ void __init paging_init(void)
 
 	/* Invalidate both kernel TSBs.  */
 	memset(swapper_tsb, 0x40, sizeof(swapper_tsb));
+#ifndef CONFIG_DEBUG_PAGEALLOC
 	memset(swapper_4m_tsb, 0x40, sizeof(swapper_4m_tsb));
+#endif
 
 	if (tlb_type == hypervisor)
 		sun4v_pgprot_init();
@@ -1573,6 +1556,10 @@ void __init mem_init(void)
 #ifdef CONFIG_DEBUG_BOOTMEM
 	prom_printf("mem_init: Calling free_all_bootmem().\n");
 #endif
+
+	/* We subtract one to account for the mem_map_zero page
+	 * allocated below.
+	 */
 	totalram_pages = num_physpages = free_all_bootmem() - 1;
 
 	/*
@@ -1725,8 +1712,13 @@ static void __init sun4u_pgprot_init(void)
 	pg_iobits = (_PAGE_VALID | _PAGE_PRESENT_4U | __DIRTY_BITS_4U |
 		     __ACCESS_BITS_4U | _PAGE_E_4U);
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZBITS_4U) ^
+		0xfffff80000000000;
+#else
 	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZ4MB_4U) ^
 		0xfffff80000000000;
+#endif
 	kern_linear_pte_xor[0] |= (_PAGE_CP_4U | _PAGE_CV_4U |
 				   _PAGE_P_4U | _PAGE_W_4U);
 
@@ -1769,13 +1761,23 @@ static void __init sun4v_pgprot_init(void)
 	_PAGE_E = _PAGE_E_4V;
 	_PAGE_CACHE = _PAGE_CACHE_4V;
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZBITS_4V) ^
+		0xfffff80000000000;
+#else
 	kern_linear_pte_xor[0] = (_PAGE_VALID | _PAGE_SZ4MB_4V) ^
 		0xfffff80000000000;
+#endif
 	kern_linear_pte_xor[0] |= (_PAGE_CP_4V | _PAGE_CV_4V |
 				   _PAGE_P_4V | _PAGE_W_4V);
 
+#ifdef CONFIG_DEBUG_PAGEALLOC
+	kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZBITS_4V) ^
+		0xfffff80000000000;
+#else
 	kern_linear_pte_xor[1] = (_PAGE_VALID | _PAGE_SZ256MB_4V) ^
 		0xfffff80000000000;
+#endif
 	kern_linear_pte_xor[1] |= (_PAGE_CP_4V | _PAGE_CV_4V |
 				   _PAGE_P_4V | _PAGE_W_4V);
 
@@ -1857,62 +1859,6 @@ static unsigned long kern_large_tte(unsigned long paddr)
 	return val | paddr;
 }
 
-/*
- * Translate PROM's mapping we capture at boot time into physical address.
- * The second parameter is only set from prom_callback() invocations.
- */
-unsigned long prom_virt_to_phys(unsigned long promva, int *error)
-{
-	unsigned long mask;
-	int i;
-
-	mask = _PAGE_PADDR_4U;
-	if (tlb_type == hypervisor)
-		mask = _PAGE_PADDR_4V;
-
-	for (i = 0; i < prom_trans_ents; i++) {
-		struct linux_prom_translation *p = &prom_trans[i];
-
-		if (promva >= p->virt &&
-		    promva < (p->virt + p->size)) {
-			unsigned long base = p->data & mask;
-
-			if (error)
-				*error = 0;
-			return base + (promva & (8192 - 1));
-		}
-	}
-	if (error)
-		*error = 1;
-	return 0UL;
-}
-
-/* XXX We should kill off this ugly thing at so me point. XXX */
-unsigned long sun4u_get_pte(unsigned long addr)
-{
-	pgd_t *pgdp;
-	pud_t *pudp;
-	pmd_t *pmdp;
-	pte_t *ptep;
-	unsigned long mask = _PAGE_PADDR_4U;
-
-	if (tlb_type == hypervisor)
-		mask = _PAGE_PADDR_4V;
-
-	if (addr >= PAGE_OFFSET)
-		return addr & mask;
-
-	if ((addr >= LOW_OBP_ADDRESS) && (addr < HI_OBP_ADDRESS))
-		return prom_virt_to_phys(addr, NULL);
-
-	pgdp = pgd_offset_k(addr);
-	pudp = pud_offset(pgdp, addr);
-	pmdp = pmd_offset(pudp, addr);
-	ptep = pte_offset_kernel(pmdp, addr);
-
-	return pte_val(*ptep) & mask;
-}
-
 /* If not locked, zap it. */
 void __flush_tlb_all(void)
 {
diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c
index bca16e8c95c3..542c808ec2c8 100644
--- a/arch/sparc64/solaris/misc.c
+++ b/arch/sparc64/solaris/misc.c
@@ -224,7 +224,8 @@ static char *serial(char *buffer, int sz)
 
 	*buffer = 0;
 	if (dp) {
-		char *val = of_get_property(dp, "system-board-serial#", &len);
+		const char *val =
+			of_get_property(dp, "system-board-serial#", &len);
 
 		if (val && len > 0) {
 			if (len > sz)
@@ -363,8 +364,10 @@ asmlinkage int solaris_sysconf(int id)
 {
 	switch (id) {
 	case SOLARIS_CONFIG_NGROUPS:	return NGROUPS_MAX;
-	case SOLARIS_CONFIG_CHILD_MAX:	return -1; /* no limit */
-	case SOLARIS_CONFIG_OPEN_FILES:	return OPEN_MAX;
+	case SOLARIS_CONFIG_CHILD_MAX:
+		return current->signal->rlim[RLIMIT_NPROC].rlim_cur;
+	case SOLARIS_CONFIG_OPEN_FILES:
+		return current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
 	case SOLARIS_CONFIG_POSIX_VER:	return 199309;
 	case SOLARIS_CONFIG_PAGESIZE:	return PAGE_SIZE;
 	case SOLARIS_CONFIG_XOPEN_VER:	return 3;
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index b3a21ba77cd2..354cc6b70530 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -44,7 +44,7 @@ config LOCKDEP_SUPPORT
 
 config STACKTRACE_SUPPORT
 	bool
-	default y
+	default n
 
 config GENERIC_CALIBRATE_DELAY
 	bool
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index e03e40c7aac3..a5b079d5e865 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -146,6 +146,25 @@ config LEGACY_PTYS
 	  security.  This option enables these legacy devices; on most
 	  systems, it is safe to say N.
 
+config RAW_DRIVER
+        tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+        help
+          The raw driver permits block devices to be bound to /dev/raw/rawN.
+          Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
+          See the raw(8) manpage for more details.
+
+          The raw driver is deprecated and will be removed soon.
+          Applications should simply open the device (eg /dev/hda1)
+          with the O_DIRECT flag.
+
+config MAX_RAW_DEVS
+        int "Maximum number of RAW devices to support (1-8192)"
+        depends on RAW_DRIVER
+        default "256"
+        help
+          The maximum number of RAW devices that are supported.
+          Default is 256. Increase this number in case you need lots of
+          raw devices.
 
 config LEGACY_PTY_COUNT
 	int "Maximum number of legacy PTY in use"
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 7b8baf146acc..9fdfad649536 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -236,11 +236,11 @@ void free_irqs(void)
 	struct chan *chan;
 	LIST_HEAD(list);
 	struct list_head *ele;
+	unsigned long flags;
 
-	spin_lock_irq(&irqs_to_free_lock);
+	spin_lock_irqsave(&irqs_to_free_lock, flags);
 	list_splice_init(&irqs_to_free, &list);
-	INIT_LIST_HEAD(&irqs_to_free);
-	spin_unlock_irq(&irqs_to_free_lock);
+	spin_unlock_irqrestore(&irqs_to_free_lock, flags);
 
 	list_for_each(ele, &list){
 		chan = list_entry(ele, struct chan, free_list);
@@ -255,13 +255,15 @@ void free_irqs(void)
 
 static void close_one_chan(struct chan *chan, int delay_free_irq)
 {
+	unsigned long flags;
+
 	if(!chan->opened)
 		return;
 
 	if(delay_free_irq){
-		spin_lock_irq(&irqs_to_free_lock);
+		spin_lock_irqsave(&irqs_to_free_lock, flags);
 		list_add(&chan->free_list, &irqs_to_free);
-		spin_unlock_irq(&irqs_to_free_lock);
+		spin_unlock_irqrestore(&irqs_to_free_lock, flags);
 	}
 	else {
 		if(chan->input)
diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c
index 9c2e7a758f21..adeece11e596 100644
--- a/arch/um/drivers/daemon_kern.c
+++ b/arch/um/drivers/daemon_kern.c
@@ -46,7 +46,7 @@ static int daemon_read(int fd, struct sk_buff **skb,
 {
 	*skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
 	if(*skb == NULL) return(-ENOMEM);
-	return(net_recvfrom(fd, (*skb)->mac.raw, 
+	return(net_recvfrom(fd, skb_mac_header(*skb),
 			    (*skb)->dev->mtu + ETH_HEADER_OTHER));
 }
 
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index 310af0f1e49e..021b82c7a759 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -56,30 +56,31 @@ static int connect_to_switch(struct daemon_data *pri)
 
 	pri->control = socket(AF_UNIX, SOCK_STREAM, 0);
 	if(pri->control < 0){
+		err = -errno;
 		printk("daemon_open : control socket failed, errno = %d\n", 
-		       errno);		
-		return(-errno);
+		       -err);
+		return err;
 	}
 
 	if(connect(pri->control, (struct sockaddr *) ctl_addr, 
 		   sizeof(*ctl_addr)) < 0){
-		printk("daemon_open : control connect failed, errno = %d\n",
-		       errno);
 		err = -errno;
+		printk("daemon_open : control connect failed, errno = %d\n",
+		       -err);
 		goto out;
 	}
 
 	fd = socket(AF_UNIX, SOCK_DGRAM, 0);
 	if(fd < 0){
-		printk("daemon_open : data socket failed, errno = %d\n", 
-		       errno);
 		err = -errno;
+		printk("daemon_open : data socket failed, errno = %d\n",
+		       -err);
 		goto out;
 	}
 	if(bind(fd, (struct sockaddr *) local_addr, sizeof(*local_addr)) < 0){
-		printk("daemon_open : data bind failed, errno = %d\n", 
-		       errno);
 		err = -errno;
+		printk("daemon_open : data bind failed, errno = %d\n",
+		       -err);
 		goto out_close;
 	}
 
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 01d4ab6b0ef1..f75d7b05c481 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -370,10 +370,10 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	struct tty_struct *tty = line->tty;
 	int err;
 
-	/* Interrupts are enabled here because we registered the interrupt with
+	/* Interrupts are disabled here because we registered the interrupt with
 	 * IRQF_DISABLED (see line_setup_irq).*/
 
-	spin_lock_irq(&line->lock);
+	spin_lock(&line->lock);
 	err = flush_buffer(line);
 	if (err == 0) {
 		return IRQ_NONE;
@@ -381,7 +381,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 		line->head = line->buffer;
 		line->tail = line->buffer;
 	}
-	spin_unlock_irq(&line->lock);
+	spin_unlock(&line->lock);
 
 	if(tty == NULL)
 		return IRQ_NONE;
diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c
index 52ccb7b53cd2..e6b8e0dd72a8 100644
--- a/arch/um/drivers/mcast_kern.c
+++ b/arch/um/drivers/mcast_kern.c
@@ -50,7 +50,7 @@ static int mcast_read(int fd, struct sk_buff **skb, struct uml_net_private *lp)
 {
 	*skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
 	if(*skb == NULL) return(-ENOMEM);
-	return(net_recvfrom(fd, (*skb)->mac.raw, 
+	return(net_recvfrom(fd, skb_mac_header(*skb),
 			    (*skb)->dev->mtu + ETH_HEADER_OTHER));
 }
 
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 8138f5ea1bf7..b827e82884c9 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -50,6 +50,14 @@ static void mcast_user_init(void *data, void *dev)
 	pri->dev = dev;
 }
 
+static void mcast_remove(void *data)
+{
+	struct mcast_data *pri = data;
+
+	kfree(pri->mcast_addr);
+	pri->mcast_addr = NULL;
+}
+
 static int mcast_open(void *data)
 {
 	struct mcast_data *pri = data;
@@ -157,7 +165,7 @@ const struct net_user_info mcast_user_info = {
 	.init		= mcast_user_init,
 	.open		= mcast_open,
 	.close	 	= mcast_close,
-	.remove	 	= NULL,
+	.remove	 	= mcast_remove,
 	.set_mtu	= mcast_set_mtu,
 	.add_address	= NULL,
 	.delete_address = NULL,
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 178b2eff4a8c..65ad2932672c 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -615,6 +615,9 @@ void mconsole_remove(struct mc_request *req)
 	err_msg = NULL;
 	err = (*dev->remove)(n, &err_msg);
 	switch(err){
+	case 0:
+		err_msg = "";
+		break;
 	case -ENODEV:
 		if(err_msg == NULL)
 			err_msg = "Device doesn't exist";
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 04e31f86c10a..859303730b2f 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -55,7 +55,7 @@ static int uml_net_rx(struct net_device *dev)
 
 	skb->dev = dev;
 	skb_put(skb, dev->mtu);
-	skb->mac.raw = skb->data;
+	skb_reset_mac_header(skb);
 	pkt_len = (*lp->read)(lp->fd, &skb, lp);
 
 	if (pkt_len > 0) {
diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c
index e67362acf0e7..948849343ca4 100644
--- a/arch/um/drivers/pcap_kern.c
+++ b/arch/um/drivers/pcap_kern.c
@@ -36,7 +36,7 @@ static int pcap_read(int fd, struct sk_buff **skb,
 {
 	*skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
 	if(*skb == NULL) return(-ENOMEM);
-	return(pcap_user_read(fd, (*skb)->mac.raw, 
+	return(pcap_user_read(fd, skb_mac_header(*skb),
 			      (*skb)->dev->mtu + ETH_HEADER_OTHER,
 			      (struct pcap_data *) &lp->user));
 }
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 25634bd1f585..125c44f77638 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -49,7 +49,7 @@ static unsigned short slip_protocol(struct sk_buff *skbuff)
 static int slip_read(int fd, struct sk_buff **skb, 
 		       struct uml_net_private *lp)
 {
-	return(slip_user_read(fd, (*skb)->mac.raw, (*skb)->dev->mtu, 
+	return(slip_user_read(fd, skb_mac_header(*skb), (*skb)->dev->mtu,
 			      (struct slip_data *) &lp->user));
 }
 
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index b3ed8fb874ab..0a0324a6d290 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -53,7 +53,7 @@ static unsigned short slirp_protocol(struct sk_buff *skbuff)
 static int slirp_read(int fd, struct sk_buff **skb, 
 		       struct uml_net_private *lp)
 {
-	return(slirp_user_read(fd, (*skb)->mac.raw, (*skb)->dev->mtu, 
+	return(slirp_user_read(fd, skb_mac_header(*skb), (*skb)->dev->mtu,
 			      (struct slirp_data *) &lp->user));
 }
 
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index fc22b9bd9153..4b382a6e710f 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -179,7 +179,7 @@ static struct console ssl_cons = {
 	.write		= ssl_console_write,
 	.device		= ssl_console_device,
 	.setup		= ssl_console_setup,
-	.flags		= CON_PRINTBUFFER,
+	.flags		= CON_PRINTBUFFER|CON_ANYTIME,
 	.index		= -1,
 };
 
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 7ff0b0fc37e7..76d1f1c980ef 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -153,7 +153,7 @@ static struct console stdiocons = {
 	.write		= uml_console_write,
 	.device		= uml_console_device,
 	.setup		= uml_console_setup,
-	.flags		= CON_PRINTBUFFER,
+	.flags		= CON_PRINTBUFFER|CON_ANYTIME,
 	.index		= -1,
 };
 
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index f98d26e51381..8bd9204ac1ab 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -109,10 +109,6 @@ static inline void ubd_set_bit(__u64 bit, unsigned char *data)
 
 static DEFINE_MUTEX(ubd_lock);
 
-/* XXX - this made sense in 2.4 days, now it's only used as a boolean, and
- * probably it doesn't make sense even for that. */
-static int do_ubd;
-
 static int ubd_open(struct inode * inode, struct file * filp);
 static int ubd_release(struct inode * inode, struct file * file);
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -169,6 +165,7 @@ struct ubd {
 	struct platform_device pdev;
 	struct request_queue *queue;
 	spinlock_t lock;
+	int active;
 };
 
 #define DEFAULT_COW { \
@@ -190,6 +187,7 @@ struct ubd {
 	.shared =		0, \
         .cow =			DEFAULT_COW, \
 	.lock =			SPIN_LOCK_UNLOCKED,	\
+	.active =		0, \
 }
 
 /* Protected by ubd_lock */
@@ -507,7 +505,6 @@ static void ubd_handler(void)
 	struct ubd *dev;
 	int n;
 
-	do_ubd = 0;
 	n = os_read_file(thread_fd, &req, sizeof(req));
 	if(n != sizeof(req)){
 		printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, "
@@ -517,6 +514,7 @@ static void ubd_handler(void)
 
 	rq = req.req;
 	dev = rq->rq_disk->private_data;
+	dev->active = 0;
 
 	ubd_finish(rq, req.error);
 	reactivate_fd(thread_fd, UBD_IRQ);
@@ -1081,11 +1079,12 @@ static void do_ubd_request(request_queue_t *q)
 		}
 	}
 	else {
-		if(do_ubd || (req = elv_next_request(q)) == NULL)
+		struct ubd *dev = q->queuedata;
+		if(dev->active || (req = elv_next_request(q)) == NULL)
 			return;
 		err = prepare_request(req, &io_req);
 		if(!err){
-			do_ubd = 1;
+			dev->active = 1;
 			n = os_write_file(thread_fd, (char *) &io_req,
 					 sizeof(io_req));
 			if(n != sizeof(io_req))
diff --git a/arch/um/include/mconsole.h b/arch/um/include/mconsole.h
index 2666815b6af5..b282839c1625 100644
--- a/arch/um/include/mconsole.h
+++ b/arch/um/include/mconsole.h
@@ -12,6 +12,8 @@
 #define u32 uint32_t
 #endif
 
+#include "sysdep/ptrace.h"
+
 #define MCONSOLE_MAGIC (0xcafebabe)
 #define MCONSOLE_MAX_DATA (512)
 #define MCONSOLE_VERSION 2
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 8629bd191492..5c74da410451 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -192,7 +192,9 @@ extern int os_process_parent(int pid);
 extern void os_stop_process(int pid);
 extern void os_kill_process(int pid, int reap_child);
 extern void os_kill_ptraced_process(int pid, int reap_child);
+#ifdef UML_CONFIG_MODE_TT
 extern void os_usr1_process(int pid);
+#endif
 extern long os_ptrace_ldt(long pid, long addr, long data);
 
 extern int os_getpid(void);
@@ -261,7 +263,6 @@ extern void block_signals(void);
 extern void unblock_signals(void);
 extern int get_signals(void);
 extern int set_signals(int enable);
-extern void os_usr1_signal(int on);
 
 /* trap.c */
 extern void os_fill_handlinfo(struct kern_handlers h);
diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h
index 66cb400c2c92..62403bd99661 100644
--- a/arch/um/include/sysdep-x86_64/ptrace.h
+++ b/arch/um/include/sysdep-x86_64/ptrace.h
@@ -104,10 +104,6 @@ union uml_pt_regs {
 #endif
 #ifdef UML_CONFIG_MODE_SKAS
 	struct skas_regs {
-		/* x86_64 ptrace uses sizeof(user_regs_struct) as its register
-		 * file size, while i386 uses FRAME_SIZE.  Therefore, we need
-		 * to use UM_FRAME_SIZE here instead of HOST_FRAME_SIZE.
-		 */
 		unsigned long regs[MAX_REG_NR];
 		unsigned long fp[HOST_FP_SIZE];
                 struct faultinfo faultinfo;
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 50a288bb875a..dbf2f5bc842f 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -142,6 +142,7 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 				     .events 		= events,
 				     .current_events 	= 0 } );
 
+	err = -EBUSY;
 	spin_lock_irqsave(&irq_lock, flags);
 	for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
 		if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index e85d65deea0d..df7d662b98ce 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -64,8 +64,6 @@ static void setup_highmem(unsigned long highmem_start,
 
 void mem_init(void)
 {
-	max_low_pfn = (high_physmem - uml_physmem) >> PAGE_SHIFT;
-
 	/* clear the zero-page */
 	memset((void *) empty_zero_page, 0, PAGE_SIZE);
 
@@ -80,6 +78,7 @@ void mem_init(void)
 
 	/* this will put all low memory onto the freelists */
 	totalram_pages = free_all_bootmem();
+	max_low_pfn = totalram_pages;
 #ifdef CONFIG_HIGHMEM
 	totalhigh_pages = highmem >> PAGE_SHIFT;
 	totalram_pages += totalhigh_pages;
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index 2a32e5e8e9c9..3c798cdde550 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -158,12 +158,12 @@ static int kern_do_signal(struct pt_regs *regs)
 		clear_thread_flag(TIF_RESTORE_SIGMASK);
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
-	return(handled_sig);
+	return handled_sig;
 }
 
 int do_signal(void)
 {
-	return(kern_do_signal(&current->thread.regs));
+	return kern_do_signal(&current->thread.regs);
 }
 
 /*
@@ -186,5 +186,5 @@ long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
 {
-	return(do_sigaltstack(uss, uoss, PT_REGS_SP(&current->thread.regs)));
+	return do_sigaltstack(uss, uoss, PT_REGS_SP(&current->thread.regs));
 }
diff --git a/arch/um/os-Linux/drivers/ethertap_kern.c b/arch/um/os-Linux/drivers/ethertap_kern.c
index 70541821775f..12689141414d 100644
--- a/arch/um/os-Linux/drivers/ethertap_kern.c
+++ b/arch/um/os-Linux/drivers/ethertap_kern.c
@@ -43,7 +43,7 @@ static int etap_read(int fd, struct sk_buff **skb, struct uml_net_private *lp)
 
 	*skb = ether_adjust_skb(*skb, ETH_HEADER_ETHERTAP);
 	if(*skb == NULL) return(-ENOMEM);
-	len = net_recvfrom(fd, (*skb)->mac.raw, 
+	len = net_recvfrom(fd, skb_mac_header(*skb),
 			   (*skb)->dev->mtu + 2 * ETH_HEADER_ETHERTAP);
 	if(len <= 0) return(len);
 	skb_pull(*skb, 2);
diff --git a/arch/um/os-Linux/drivers/tuntap_kern.c b/arch/um/os-Linux/drivers/tuntap_kern.c
index 76570a2c25c3..f1714e7fb1d0 100644
--- a/arch/um/os-Linux/drivers/tuntap_kern.c
+++ b/arch/um/os-Linux/drivers/tuntap_kern.c
@@ -43,7 +43,7 @@ static int tuntap_read(int fd, struct sk_buff **skb,
 {
 	*skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER);
 	if(*skb == NULL) return(-ENOMEM);
-	return(net_read(fd, (*skb)->mac.raw, 
+	return(net_read(fd, skb_mac_header(*skb),
 			(*skb)->dev->mtu + ETH_HEADER_OTHER));
 }
 
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index 3a8d7e3aae0a..608784d4ec57 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -39,6 +39,9 @@ __init void scan_elf_aux( char **envp)
 		switch ( auxv->a_type ) {
 			case AT_SYSINFO:
 				__kernel_vsyscall = auxv->a_un.a_val;
+				/* See if the page is under TASK_SIZE */
+				if (__kernel_vsyscall < (unsigned long) envp)
+					__kernel_vsyscall = 0;
 				break;
 			case AT_SYSINFO_EHDR:
 				vsyscall_ehdr = auxv->a_un.a_val;
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index c692a192957a..76bdd6712417 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -21,6 +21,7 @@
 #include "longjmp.h"
 #include "skas_ptrace.h"
 #include "kern_constants.h"
+#include "uml-config.h"
 
 #define ARBITRARY_ADDR -1
 #define FAILURE_PID    -1
@@ -131,10 +132,12 @@ void os_kill_ptraced_process(int pid, int reap_child)
 		CATCH_EINTR(waitpid(pid, NULL, 0));
 }
 
+#ifdef UML_CONFIG_MODE_TT
 void os_usr1_process(int pid)
 {
 	kill(pid, SIGUSR1);
 }
+#endif
 
 /* Don't use the glibc version, which caches the result in TLS. It misses some
  * syscalls, and also breaks with clone(), which does not unshare the TLS.
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index b2e1fd8e3571..3fc43b33db66 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -334,8 +334,11 @@ void maybe_sigio_broken(int fd, int read)
 
 	sigio_lock();
 	err = need_poll(&all_sigio_fds, all_sigio_fds.used + 1);
-	if(err)
+	if(err){
+		printk("maybe_sigio_broken - failed to add pollfd for "
+		       "descriptor %d\n", fd);
 		goto out;
+	}
 
 	all_sigio_fds.poll[all_sigio_fds.used++] =
 		((struct pollfd) { .fd  	= fd,
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index b897e8592d77..266768629fee 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -243,8 +243,3 @@ int set_signals(int enable)
 
 	return ret;
 }
-
-void os_usr1_signal(int on)
-{
-	change_sig(SIGUSR1, on);
-}
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index b3c11cfa995a..9383e8751ae7 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -48,7 +48,7 @@ int multi_op_count = 0;
 static inline long do_syscall_stub(struct mm_id * mm_idp, void **addr)
 {
 	unsigned long regs[MAX_REG_NR];
-	int n;
+	int n, i;
 	long ret, offset;
 	unsigned long * data;
 	unsigned long * syscall;
@@ -66,9 +66,13 @@ static inline long do_syscall_stub(struct mm_id * mm_idp, void **addr)
 		 (unsigned long) &__syscall_stub_start);
 
 	n = ptrace_setregs(pid, regs);
-	if(n < 0)
+	if(n < 0){
+		printk("Registers - \n");
+		for(i = 0; i < MAX_REG_NR; i++)
+			printk("\t%d\t0x%lx\n", i, regs[i]);
 		panic("do_syscall_stub : PTRACE_SETREGS failed, errno = %d\n",
-		      n);
+		      -n);
+	}
 
 	wait_stub_done(pid, 0, "do_syscall_stub");
 
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 9b34fe65949a..0564422c155f 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -67,7 +67,7 @@ void wait_stub_done(int pid, int sig, char * fname)
 
 	if((n < 0) || !WIFSTOPPED(status) ||
 	   (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
-		unsigned long regs[HOST_FRAME_SIZE];
+		unsigned long regs[MAX_REG_NR];
 
 		if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
 			printk("Failed to get registers from stub, "
@@ -76,7 +76,7 @@ void wait_stub_done(int pid, int sig, char * fname)
 			int i;
 
 			printk("Stub registers -\n");
-			for(i = 0; i < HOST_FRAME_SIZE; i++)
+			for(i = 0; i < ARRAY_SIZE(regs); i++)
 				printk("\t%d - %lx\n", i, regs[i]);
 		}
 		panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
@@ -328,7 +328,7 @@ void userspace(union uml_pt_regs *regs)
 int copy_context_skas0(unsigned long new_stack, int pid)
 {
 	int err;
-	unsigned long regs[HOST_FRAME_SIZE];
+	unsigned long regs[MAX_REG_NR];
 	unsigned long fp_regs[HOST_FP_SIZE];
 	unsigned long current_stack = current_stub_stack();
 	struct stub_data *data = (struct stub_data *) current_stack;
@@ -419,9 +419,12 @@ void map_stub_pages(int fd, unsigned long code,
 					  .offset  = code_offset
 	} } });
 	n = os_write_file(fd, &mmop, sizeof(mmop));
-	if(n != sizeof(mmop))
+	if(n != sizeof(mmop)){
+		printk("mmap args - addr = 0x%lx, fd = %d, offset = %llx\n",
+		       code, code_fd, (unsigned long long) code_offset);
 		panic("map_stub_pages : /proc/mm map for code failed, "
 		      "err = %d\n", -n);
+	}
 
 	if ( stack ) {
 		__u64 map_offset;
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index 79cd93c8c5ed..84b44f9cd42a 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -15,7 +15,7 @@
 
 /* These are set once at boot time and not changed thereafter */
 
-static unsigned long exec_regs[HOST_FRAME_SIZE];
+static unsigned long exec_regs[MAX_REG_NR];
 static unsigned long exec_fp_regs[HOST_FP_SIZE];
 static unsigned long exec_fpx_regs[HOST_XFP_SIZE];
 static int have_fpx_regs = 1;
@@ -101,6 +101,7 @@ void init_registers(int pid)
 {
 	int err;
 
+	memset(exec_regs, 0, sizeof(exec_regs));
 	err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
@@ -124,7 +125,7 @@ void init_registers(int pid)
 
 void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
 {
-	memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+	memcpy(regs, exec_regs, sizeof(exec_regs));
 	if(fp_regs != NULL)
 		memcpy(fp_regs, exec_fp_regs,
 		       HOST_FP_SIZE * sizeof(unsigned long));
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
index a2d7e0c603f7..e6fc2179d1bc 100644
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ b/arch/um/os-Linux/sys-x86_64/registers.c
@@ -14,7 +14,7 @@
 
 /* These are set once at boot time and not changed thereafter */
 
-static unsigned long exec_regs[HOST_FRAME_SIZE];
+static unsigned long exec_regs[MAX_REG_NR];
 static unsigned long exec_fp_regs[HOST_FP_SIZE];
 
 void init_thread_registers(union uml_pt_regs *to)
@@ -72,7 +72,7 @@ void init_registers(int pid)
 
 void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
 {
-	memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long));
+	memcpy(regs, exec_regs, sizeof(exec_regs));
 	if(fp_regs != NULL)
 		memcpy(fp_regs, exec_fp_regs,
 		       HOST_FP_SIZE * sizeof(unsigned long));
diff --git a/arch/um/os-Linux/trap.c b/arch/um/os-Linux/trap.c
index 1df231a26244..d221214d2ed5 100644
--- a/arch/um/os-Linux/trap.c
+++ b/arch/um/os-Linux/trap.c
@@ -16,6 +16,7 @@ void usr2_handler(int sig, union uml_pt_regs *regs)
 	CHOOSE_MODE(syscall_handler_tt(sig, regs), (void) 0);
 }
 
+/* Initialized from linux_main() */
 void (*sig_info[NSIG])(int, union uml_pt_regs *);
 
 void os_fill_handlinfo(struct kern_handlers h)
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 813077fb1e5b..a9a4b85ca516 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -10,7 +10,7 @@ USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 $(USER_OBJS:.o=.%): \
 	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(basetarget).o)
 $(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
-	-Dunix -D__unix__ -D__$(SUBARCH)__
+	-Dunix -D__unix__ -D__$(SUBARCH)__ $(CF)
 
 # These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of
 # using it directly.
@@ -19,7 +19,7 @@ UNPROFILE_OBJS := $(foreach file,$(UNPROFILE_OBJS),$(obj)/$(file))
 $(UNPROFILE_OBJS:.o=.%): \
 	c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) $(CFLAGS_$(basetarget).o)
 $(UNPROFILE_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
-	-Dunix -D__unix__ -D__$(SUBARCH)__
+	-Dunix -D__unix__ -D__$(SUBARCH)__ $(CF)
 
 # The stubs and unmap.o can't try to call mcount or update basic block data
 define unprofile
diff --git a/arch/um/sys-i386/delay.c b/arch/um/sys-i386/delay.c
index 2c11b9770e8b..d623e074f41d 100644
--- a/arch/um/sys-i386/delay.c
+++ b/arch/um/sys-i386/delay.c
@@ -27,14 +27,3 @@ void __udelay(unsigned long usecs)
 }
 
 EXPORT_SYMBOL(__udelay);
-
-void __const_udelay(unsigned long usecs)
-{
-	int i, n;
-
-	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-        for(i=0;i<n;i++)
-                cpu_relax();
-}
-
-EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index 5db7737df0ff..a939a7ef0227 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -7,6 +7,7 @@
 #include "linux/slab.h"
 #include "linux/types.h"
 #include "linux/errno.h"
+#include "linux/spinlock.h"
 #include "asm/uaccess.h"
 #include "asm/smp.h"
 #include "asm/ldt.h"
@@ -386,23 +387,34 @@ static long do_modify_ldt_skas(int func, void __user *ptr,
 	return ret;
 }
 
-short dummy_list[9] = {0, -1};
-short * host_ldt_entries = NULL;
+static DEFINE_SPINLOCK(host_ldt_lock);
+static short dummy_list[9] = {0, -1};
+static short * host_ldt_entries = NULL;
 
-void ldt_get_host_info(void)
+static void ldt_get_host_info(void)
 {
 	long ret;
 	struct ldt_entry * ldt;
+	short *tmp;
 	int i, size, k, order;
 
+	spin_lock(&host_ldt_lock);
+
+	if(host_ldt_entries != NULL){
+		spin_unlock(&host_ldt_lock);
+		return;
+	}
 	host_ldt_entries = dummy_list+1;
 
+	spin_unlock(&host_ldt_lock);
+
 	for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++);
 
 	ldt = (struct ldt_entry *)
 	      __get_free_pages(GFP_KERNEL|__GFP_ZERO, order);
 	if(ldt == NULL) {
-		printk("ldt_get_host_info: couldn't allocate buffer for host ldt\n");
+		printk("ldt_get_host_info: couldn't allocate buffer for host "
+		       "ldt\n");
 		return;
 	}
 
@@ -426,11 +438,13 @@ void ldt_get_host_info(void)
 		host_ldt_entries = dummy_list;
 	else {
 		size = (size + 1) * sizeof(dummy_list[0]);
-		host_ldt_entries = kmalloc(size, GFP_KERNEL);
-		if(host_ldt_entries == NULL) {
-			printk("ldt_get_host_info: couldn't allocate host ldt list\n");
+		tmp = kmalloc(size, GFP_KERNEL);
+		if(tmp == NULL) {
+			printk("ldt_get_host_info: couldn't allocate host ldt "
+			       "list\n");
 			goto out_free;
 		}
+		host_ldt_entries = tmp;
 	}
 
 	for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){
@@ -480,8 +494,7 @@ long init_new_ldt(struct mmu_context_skas * new_mm,
 			 * inherited from the host. All ldt-entries found
 			 * will be reset in the following loop
 			 */
-			if(host_ldt_entries == NULL)
-				ldt_get_host_info();
+			ldt_get_host_info();
 			for(num_p=host_ldt_entries; *num_p != -1; num_p++){
 				desc.entry_number = *num_p;
 				err = write_ldt_entry(&new_mm->id, 1, &desc,
@@ -560,6 +573,6 @@ void free_ldt(struct mmu_context_skas * mm)
 
 int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
 {
-	return(CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func,
-	                        ptr, bytecount));
+	return CHOOSE_MODE_PROC(do_modify_ldt_tt, do_modify_ldt_skas, func,
+	                        ptr, bytecount);
 }
diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c
index 137f4446b439..dee5be66da82 100644
--- a/arch/um/sys-x86_64/delay.c
+++ b/arch/um/sys-x86_64/delay.c
@@ -28,14 +28,3 @@ void __udelay(unsigned long usecs)
 }
 
 EXPORT_SYMBOL(__udelay);
-
-void __const_udelay(unsigned long usecs)
-{
-	unsigned long i, n;
-
-	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-        for(i=0;i<n;i++)
-                cpu_relax();
-}
-
-EXPORT_SYMBOL(__const_udelay);
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index 01b91f9fa789..b3f6350cac44 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -103,6 +103,9 @@ long arch_prctl_skas(struct task_struct *task, int code,
 
         switch(code){
 	case ARCH_SET_FS:
+		current->thread.arch.fs = (unsigned long) ptr;
+		save_registers(pid, &current->thread.regs.regs);
+		break;
 	case ARCH_SET_GS:
                 save_registers(pid, &current->thread.regs.regs);
 		break;
@@ -140,9 +143,8 @@ long sys_clone(unsigned long clone_flags, unsigned long newsp,
 
 void arch_switch_to_skas(struct task_struct *from, struct task_struct *to)
 {
-        if(to->thread.arch.fs == 0)
+        if((to->thread.arch.fs == 0) || (to->mm == NULL))
                 return;
 
         arch_prctl_skas(to, ARCH_SET_FS, (void __user *) to->thread.arch.fs);
 }
-
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
index dbfab8fc9b49..50ccc7f57cd0 100644
--- a/arch/v850/Kconfig
+++ b/arch/v850/Kconfig
@@ -217,7 +217,7 @@ menu "Processor type and features"
    # Some platforms pre-zero memory, in which case the kernel doesn't need to
    config ZERO_BSS
    	  bool
-	  depends !V850E2_SIM85E2C
+	  depends on !V850E2_SIM85E2C
 	  default y
 
    # The crappy-ass zone allocator requires that the start of allocatable
diff --git a/arch/x86_64/boot/video.S b/arch/x86_64/boot/video.S
index d6ff88f35135..6090516c9c7f 100644
--- a/arch/x86_64/boot/video.S
+++ b/arch/x86_64/boot/video.S
@@ -571,6 +571,16 @@ setr1:	lodsw
 	jmp	_m_s
 
 check_vesa:
+#ifdef CONFIG_FIRMWARE_EDID
+	leaw	modelist+1024, %di
+	movw	$0x4f00, %ax
+	int	$0x10
+	cmpw	$0x004f, %ax
+	jnz	setbad
+
+	movw	4(%di), %ax
+	movw	%ax, vbe_version
+#endif
 	leaw	modelist+1024, %di
 	subb	$VIDEO_FIRST_VESA>>8, %bh
 	movw	%bx, %cx			# Get mode information structure
@@ -1945,6 +1955,9 @@ store_edid:
 	rep
 	stosl
 
+	cmpw	$0x0200, vbe_version		# only do EDID on >= VBE2.0
+	jl	no_edid
+
 	pushw   %es				# save ES
 	xorw    %di, %di                        # Report Capability
 	pushw   %di
@@ -1987,6 +2000,7 @@ do_restore:	.byte	0	# Screen contents altered during mode change
 svga_prefix:	.byte	VIDEO_FIRST_BIOS>>8	# Default prefix for BIOS modes
 graphic_mode:	.byte	0	# Graphic mode with a linear frame buffer
 dac_size:	.byte	6	# DAC bit depth
+vbe_version:	.word	0	# VBE bios version
 
 # Status messages
 keymsg:		.ascii	"Press <RETURN> to see video modes available, "
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 293a4a4c609e..b26378815b91 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,11 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-git8
-# Tue Feb 13 11:25:16 2007
+# Linux kernel version: 2.6.21-rc3
+# Wed Mar  7 15:29:47 2007
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
 CONFIG_X86=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_ZONE_DMA32=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -43,6 +45,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -53,6 +56,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -114,11 +118,11 @@ CONFIG_X86_PC=y
 # CONFIG_X86_VSMP is not set
 # CONFIG_MK8 is not set
 # CONFIG_MPSC is not set
-CONFIG_MCORE2=y
-# CONFIG_GENERIC_CPU is not set
-CONFIG_X86_L1_CACHE_BYTES=64
-CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_INTERNODE_CACHE_BYTES=64
+# CONFIG_MCORE2 is not set
+CONFIG_GENERIC_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=128
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
 CONFIG_X86_TSC=y
 CONFIG_X86_GOOD_APIC=y
 # CONFIG_MICROCODE is not set
@@ -207,10 +211,8 @@ CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_HOTKEY is not set
 CONFIG_ACPI_FAN=y
 # CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_BAY is not set
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_HOTPLUG_CPU=y
 CONFIG_ACPI_THERMAL=y
@@ -319,7 +321,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -421,7 +423,13 @@ CONFIG_FW_LOADER=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
 
 #
 # Block devices
@@ -441,7 +449,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -451,6 +458,7 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_SONY_LAPTOP is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -477,6 +485,7 @@ CONFIG_BLK_DEV_IDEACPI=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
@@ -622,7 +631,7 @@ CONFIG_SATA_SIL=y
 CONFIG_SATA_VIA=y
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_INTEL_COMBINED=y
+CONFIG_SATA_ACPI=y
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -726,6 +735,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
+# CONFIG_NET_SB1000 is not set
 
 #
 # ARCnet devices
@@ -920,6 +930,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1001,6 +1012,7 @@ CONFIG_I2C_ISA=m
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_I2C_SIS5595 is not set
@@ -1047,6 +1059,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_K8TEMP is not set
@@ -1090,6 +1103,11 @@ CONFIG_SENSORS_SMSC47B397=m
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1103,7 +1121,7 @@ CONFIG_SENSORS_SMSC47B397=m
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 # CONFIG_FB is not set
 
 #
@@ -1114,7 +1132,6 @@ CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
 CONFIG_VIDEO_SELECT=y
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1130,9 +1147,8 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-CONFIG_OBSOLETE_OSS=y
+# CONFIG_OBSOLETE_OSS is not set
 # CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
 CONFIG_SOUND_ICH=y
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
@@ -1263,6 +1279,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1273,6 +1290,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1538,6 +1556,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1556,6 +1575,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_DEBUG_RODATA is not set
 # CONFIG_IOMMU_DEBUG is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S
index eda7a0d4dc15..796df6992f62 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86_64/ia32/ia32entry.S
@@ -560,7 +560,7 @@ ia32_sys_call_table:
 	.quad sys_sched_yield
 	.quad sys_sched_get_priority_max
 	.quad sys_sched_get_priority_min  /* 160 */
-	.quad sys_sched_rr_get_interval
+	.quad sys32_sched_rr_get_interval
 	.quad compat_sys_nanosleep
 	.quad sys_mremap
 	.quad sys_setresuid16
diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c
index 04566fe5de49..4de3a54318f4 100644
--- a/arch/x86_64/ia32/ptrace32.c
+++ b/arch/x86_64/ia32/ptrace32.c
@@ -243,6 +243,7 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data)
 	case PTRACE_SINGLESTEP:
 	case PTRACE_DETACH:
 	case PTRACE_SYSCALL:
+	case PTRACE_OLDSETOPTIONS:
 	case PTRACE_SETOPTIONS:
 	case PTRACE_SET_THREAD_AREA:
 	case PTRACE_GET_THREAD_AREA:
diff --git a/arch/x86_64/kernel/acpi/sleep.c b/arch/x86_64/kernel/acpi/sleep.c
index 23178ce6c783..e1548fbe95ae 100644
--- a/arch/x86_64/kernel/acpi/sleep.c
+++ b/arch/x86_64/kernel/acpi/sleep.c
@@ -66,8 +66,10 @@ static void init_low_mapping(void)
 {
 	pgd_t *slot0 = pgd_offset(current->mm, 0UL);
 	low_ptr = *slot0;
+	/* FIXME: We're playing with the current task's page tables here, which
+	 * is potentially dangerous on SMP systems.
+	 */
 	set_pgd(slot0, *pgd_offset(current->mm, PAGE_OFFSET));
-	WARN_ON(num_online_cpus() != 1);
 	local_flush_tlb();
 }
 
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 723417d924c0..bd3e45d47c37 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -47,6 +47,10 @@ int apic_calibrate_pmtmr __initdata;
 
 int disable_apic_timer __initdata;
 
+/* Local APIC timer works in C2? */
+int local_apic_timer_c2_ok;
+EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
+
 static struct resource *ioapic_resources;
 static struct resource lapic_resource = {
 	.name = "Local APIC",
@@ -930,9 +934,17 @@ EXPORT_SYMBOL(switch_APIC_timer_to_ipi);
 
 void smp_send_timer_broadcast_ipi(void)
 {
+	int cpu = smp_processor_id();
 	cpumask_t mask;
 
 	cpus_and(mask, cpu_online_map, timer_interrupt_broadcast_ipi_mask);
+
+	if (cpu_isset(cpu, mask)) {
+		cpu_clear(cpu, mask);
+		add_pda(apic_timer_irqs, 1);
+		smp_local_timer_interrupt();
+	}
+
 	if (!cpus_empty(mask)) {
 		send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
 	}
@@ -1192,6 +1204,13 @@ static __init int setup_nolapic(char *str)
 } 
 early_param("nolapic", setup_nolapic);
 
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+	local_apic_timer_c2_ok = 1;
+	return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
 static __init int setup_noapictimer(char *str) 
 { 
 	if (str[0] != ' ' && str[0] != 0)
diff --git a/arch/x86_64/kernel/cpufreq/Kconfig b/arch/x86_64/kernel/cpufreq/Kconfig
index 45a6a1fd14ac..40acb67fb882 100644
--- a/arch/x86_64/kernel/cpufreq/Kconfig
+++ b/arch/x86_64/kernel/cpufreq/Kconfig
@@ -45,7 +45,6 @@ config X86_SPEEDSTEP_CENTRINO
 config X86_SPEEDSTEP_CENTRINO_ACPI
 	bool
 	depends on X86_SPEEDSTEP_CENTRINO
-	default y
 
 config X86_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
@@ -76,6 +75,7 @@ config X86_ACPI_CPUFREQ_PROC_INTF
 config X86_P4_CLOCKMOD
 	tristate "Intel Pentium 4 clock modulation"
 	depends on EMBEDDED
+	select CPU_FREQ_TABLE
 	help
 	  This adds the clock modulation driver for Intel Pentium 4 / XEON
 	  processors.  When enabled it will lower CPU temperature by skipping
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index 4651fd22b213..a490fabfcf47 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -662,7 +662,7 @@ static int __init parse_memmap_opt(char *p)
 }
 early_param("memmap", parse_memmap_opt);
 
-void finish_e820_parsing(void)
+void __init finish_e820_parsing(void)
 {
 	if (userdef) {
 		printk(KERN_INFO "user-defined physical RAM map:\n");
diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c
index bd30d138113f..fede55a53995 100644
--- a/arch/x86_64/kernel/early-quirks.c
+++ b/arch/x86_64/kernel/early-quirks.c
@@ -16,7 +16,7 @@
 #include <asm/proto.h>
 #include <asm/dma.h>
 
-static void via_bugs(void)
+static void __init via_bugs(void)
 {
 #ifdef CONFIG_IOMMU
 	if ((end_pfn > MAX_DMA32_PFN ||  force_iommu) &&
@@ -30,16 +30,13 @@ static void via_bugs(void)
 
 #ifdef CONFIG_ACPI
 
-static int nvidia_hpet_detected __initdata;
-
 static int __init nvidia_hpet_check(struct acpi_table_header *header)
 {
-	nvidia_hpet_detected = 1;
 	return 0;
 }
 #endif
 
-static void nvidia_bugs(void)
+static void __init nvidia_bugs(void)
 {
 #ifdef CONFIG_ACPI
 	/*
@@ -52,9 +49,7 @@ static void nvidia_bugs(void)
 	if (acpi_use_timer_override)
 		return;
 
-	nvidia_hpet_detected = 0;
-	acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
-	if (nvidia_hpet_detected == 0) {
+	if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
 		acpi_skip_timer_override = 1;
 		printk(KERN_INFO "Nvidia board "
 		       "detected. Ignoring ACPI "
@@ -67,7 +62,7 @@ static void nvidia_bugs(void)
 
 }
 
-static void ati_bugs(void)
+static void __init ati_bugs(void)
 {
 	if (timer_over_8254 == 1) {
 		timer_over_8254 = 0;
@@ -93,7 +88,7 @@ struct chipset {
 	void (*f)(void);
 };
 
-static struct chipset early_qrk[] = {
+static struct chipset early_qrk[] __initdata = {
 	{ PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
 	{ PCI_VENDOR_ID_VIA, via_bugs },
 	{ PCI_VENDOR_ID_ATI, ati_bugs },
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 9f5dac64aa8f..ed4350ced3d0 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -675,6 +675,9 @@ END(invalidate_interrupt\num)
 ENTRY(call_function_interrupt)
 	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
 END(call_function_interrupt)
+ENTRY(irq_move_cleanup_interrupt)
+	apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
+END(irq_move_cleanup_interrupt)
 #endif
 
 ENTRY(apic_timer_interrupt)
diff --git a/arch/x86_64/kernel/functionlist b/arch/x86_64/kernel/functionlist
index 01fa23580c85..7ae18ec12454 100644
--- a/arch/x86_64/kernel/functionlist
+++ b/arch/x86_64/kernel/functionlist
@@ -514,7 +514,6 @@
 *(.text.dentry_open)
 *(.text.dentry_iput)
 *(.text.bio_alloc)
-*(.text.alloc_skb_from_cache)
 *(.text.wait_on_page_bit)
 *(.text.vfs_readdir)
 *(.text.vfs_lstat)
diff --git a/arch/x86_64/kernel/hpet.c b/arch/x86_64/kernel/hpet.c
index 65a0edd71a17..b8286968662d 100644
--- a/arch/x86_64/kernel/hpet.c
+++ b/arch/x86_64/kernel/hpet.c
@@ -12,6 +12,12 @@
 #include <asm/timex.h>
 #include <asm/hpet.h>
 
+#define HPET_MASK	0xFFFFFFFF
+#define HPET_SHIFT	22
+
+/* FSEC = 10^-15 NSEC = 10^-9 */
+#define FSEC_PER_NSEC	1000000
+
 int nohpet __initdata;
 
 unsigned long hpet_address;
@@ -106,9 +112,31 @@ int hpet_timer_stop_set_go(unsigned long tick)
 	return 0;
 }
 
+static cycle_t read_hpet(void)
+{
+	return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static cycle_t __vsyscall_fn vread_hpet(void)
+{
+	return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
+}
+
+struct clocksource clocksource_hpet = {
+	.name		= "hpet",
+	.rating		= 250,
+	.read		= read_hpet,
+	.mask		= (cycle_t)HPET_MASK,
+	.mult		= 0, /* set below */
+	.shift		= HPET_SHIFT,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.vread		= vread_hpet,
+};
+
 int hpet_arch_init(void)
 {
 	unsigned int id;
+	u64 tmp;
 
 	if (!hpet_address)
 		return -1;
@@ -132,6 +160,22 @@ int hpet_arch_init(void)
 
 	hpet_use_timer = (id & HPET_ID_LEGSUP);
 
+	/*
+	 * hpet period is in femto seconds per cycle
+	 * so we need to convert this to ns/cyc units
+	 * aproximated by mult/2^shift
+	 *
+	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+	 *  (fsec/cyc << shift)/1000000 = mult
+	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
+	 */
+	tmp = (u64)hpet_period << HPET_SHIFT;
+	do_div(tmp, FSEC_PER_NSEC);
+	clocksource_hpet.mult = (u32)tmp;
+	clocksource_register(&clocksource_hpet);
+
 	return hpet_timer_stop_set_go(hpet_tick);
 }
 
@@ -147,6 +191,7 @@ int hpet_reenable(void)
 
 #define TICK_COUNT 100000000
 #define TICK_MIN   5000
+#define MAX_TRIES  5
 
 /*
  * Some platforms take periodic SMI interrupts with 5ms duration. Make sure none
@@ -154,13 +199,15 @@ int hpet_reenable(void)
  */
 static void __init read_hpet_tsc(int *hpet, int *tsc)
 {
-	int tsc1, tsc2, hpet1;
+	int tsc1, tsc2, hpet1, i;
 
-	do {
+	for (i = 0; i < MAX_TRIES; i++) {
 		tsc1 = get_cycles_sync();
 		hpet1 = hpet_readl(HPET_COUNTER);
 		tsc2 = get_cycles_sync();
-	} while (tsc2 - tsc1 > TICK_MIN);
+		if (tsc2 - tsc1 > TICK_MIN)
+			break;
+	}
 	*hpet = hpet1;
 	*tsc = tsc2;
 }
@@ -444,68 +491,3 @@ static int __init nohpet_setup(char *s)
 }
 
 __setup("nohpet", nohpet_setup);
-
-#define HPET_MASK	0xFFFFFFFF
-#define HPET_SHIFT	22
-
-/* FSEC = 10^-15 NSEC = 10^-9 */
-#define FSEC_PER_NSEC	1000000
-
-static void *hpet_ptr;
-
-static cycle_t read_hpet(void)
-{
-	return (cycle_t)readl(hpet_ptr);
-}
-
-static cycle_t __vsyscall_fn vread_hpet(void)
-{
-	return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
-}
-
-struct clocksource clocksource_hpet = {
-	.name		= "hpet",
-	.rating		= 250,
-	.read		= read_hpet,
-	.mask		= (cycle_t)HPET_MASK,
-	.mult		= 0, /* set below */
-	.shift		= HPET_SHIFT,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-	.vread		= vread_hpet,
-};
-
-static int __init init_hpet_clocksource(void)
-{
-	unsigned long hpet_period;
-	void __iomem *hpet_base;
-	u64 tmp;
-
-	if (!hpet_address)
-		return -ENODEV;
-
-	/* calculate the hpet address: */
-	hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
-	hpet_ptr = hpet_base + HPET_COUNTER;
-
-	/* calculate the frequency: */
-	hpet_period = readl(hpet_base + HPET_PERIOD);
-
-	/*
-	 * hpet period is in femto seconds per cycle
-	 * so we need to convert this to ns/cyc units
-	 * aproximated by mult/2^shift
-	 *
-	 *  fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
-	 *  fsec/cyc * 1ns/1000000fsec * 2^shift = mult
-	 *  fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
-	 *  (fsec/cyc << shift)/1000000 = mult
-	 *  (hpet_period << shift)/FSEC_PER_NSEC = mult
-	 */
-	tmp = (u64)hpet_period << HPET_SHIFT;
-	do_div(tmp, FSEC_PER_NSEC);
-	clocksource_hpet.mult = (u32)tmp;
-
-	return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c
index 01e2cf0bdeb1..489426682772 100644
--- a/arch/x86_64/kernel/i8259.c
+++ b/arch/x86_64/kernel/i8259.c
@@ -45,7 +45,7 @@
 
 /*
  * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x20-0x2f)
+ * (these are usually mapped to vectors 0x30-0x3f)
  */
 
 /*
@@ -299,7 +299,7 @@ void init_8259A(int auto_eoi)
 	 * outb_p - this has to work on a wide range of PC hardware.
 	 */
 	outb_p(0x11, 0x20);	/* ICW1: select 8259A-1 init */
-	outb_p(0x20 + 0, 0x21);	/* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */
+	outb_p(IRQ0_VECTOR, 0x21);	/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
 	outb_p(0x04, 0x21);	/* 8259A-1 (the master) has a slave on IR2 */
 	if (auto_eoi)
 		outb_p(0x03, 0x21);	/* master does Auto EOI */
@@ -307,7 +307,7 @@ void init_8259A(int auto_eoi)
 		outb_p(0x01, 0x21);	/* master expects normal EOI */
 
 	outb_p(0x11, 0xA0);	/* ICW1: select 8259A-2 init */
-	outb_p(0x20 + 8, 0xA1);	/* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */
+	outb_p(IRQ8_VECTOR, 0xA1);	/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
 	outb_p(0x02, 0xA1);	/* 8259A-2 is a slave on master's IR2 */
 	outb_p(0x01, 0xA1);	/* (slave's support for AEOI in flat mode
 				    is to be investigated) */
@@ -398,24 +398,24 @@ device_initcall(i8259A_init_sysfs);
 
 static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
 DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
-	[0 ... FIRST_EXTERNAL_VECTOR - 1] = -1,
-	[FIRST_EXTERNAL_VECTOR + 0] = 0,
-	[FIRST_EXTERNAL_VECTOR + 1] = 1,
-	[FIRST_EXTERNAL_VECTOR + 2] = 2,
-	[FIRST_EXTERNAL_VECTOR + 3] = 3,
-	[FIRST_EXTERNAL_VECTOR + 4] = 4,
-	[FIRST_EXTERNAL_VECTOR + 5] = 5,
-	[FIRST_EXTERNAL_VECTOR + 6] = 6,
-	[FIRST_EXTERNAL_VECTOR + 7] = 7,
-	[FIRST_EXTERNAL_VECTOR + 8] = 8,
-	[FIRST_EXTERNAL_VECTOR + 9] = 9,
-	[FIRST_EXTERNAL_VECTOR + 10] = 10,
-	[FIRST_EXTERNAL_VECTOR + 11] = 11,
-	[FIRST_EXTERNAL_VECTOR + 12] = 12,
-	[FIRST_EXTERNAL_VECTOR + 13] = 13,
-	[FIRST_EXTERNAL_VECTOR + 14] = 14,
-	[FIRST_EXTERNAL_VECTOR + 15] = 15,
-	[FIRST_EXTERNAL_VECTOR + 16 ... NR_VECTORS - 1] = -1
+	[0 ... IRQ0_VECTOR - 1] = -1,
+	[IRQ0_VECTOR] = 0,
+	[IRQ1_VECTOR] = 1,
+	[IRQ2_VECTOR] = 2,
+	[IRQ3_VECTOR] = 3,
+	[IRQ4_VECTOR] = 4,
+	[IRQ5_VECTOR] = 5,
+	[IRQ6_VECTOR] = 6,
+	[IRQ7_VECTOR] = 7,
+	[IRQ8_VECTOR] = 8,
+	[IRQ9_VECTOR] = 9,
+	[IRQ10_VECTOR] = 10,
+	[IRQ11_VECTOR] = 11,
+	[IRQ12_VECTOR] = 12,
+	[IRQ13_VECTOR] = 13,
+	[IRQ14_VECTOR] = 14,
+	[IRQ15_VECTOR] = 15,
+	[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
 };
 
 void __init init_ISA_irqs (void)
@@ -450,6 +450,7 @@ void spurious_interrupt(void);
 void error_interrupt(void);
 void reschedule_interrupt(void);
 void call_function_interrupt(void);
+void irq_move_cleanup_interrupt(void);
 void invalidate_interrupt0(void);
 void invalidate_interrupt1(void);
 void invalidate_interrupt2(void);
@@ -520,12 +521,6 @@ void __init init_IRQ(void)
 
 #ifdef CONFIG_SMP
 	/*
-	 * IRQ0 must be given a fixed assignment and initialized,
-	 * because it's used before the IO-APIC is set up.
-	 */
-	__get_cpu_var(vector_irq)[FIRST_DEVICE_VECTOR] = 0;
-
-	/*
 	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
 	 * IPI, driven by wakeup.
 	 */
@@ -543,7 +538,10 @@ void __init init_IRQ(void)
 
 	/* IPI for generic function call */
 	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-#endif	
+
+	/* Low priority IPI to cleanup after moving an irq */
+	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+#endif
 	set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 	set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 950682f35766..c6a5bc7e8118 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -36,6 +36,7 @@
 #include <acpi/acpi_bus.h>
 #endif
 
+#include <asm/idle.h>
 #include <asm/io.h>
 #include <asm/smp.h>
 #include <asm/desc.h>
@@ -47,7 +48,35 @@
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
 
-static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result);
+struct irq_cfg {
+	cpumask_t domain;
+	cpumask_t old_domain;
+	unsigned move_cleanup_count;
+	u8 vector;
+	u8 move_in_progress : 1;
+};
+
+/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
+struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = {
+	[0]  = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR,  },
+	[1]  = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR,  },
+	[2]  = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR,  },
+	[3]  = { .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR,  },
+	[4]  = { .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR,  },
+	[5]  = { .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR,  },
+	[6]  = { .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR,  },
+	[7]  = { .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR,  },
+	[8]  = { .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR,  },
+	[9]  = { .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR,  },
+	[10] = { .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, },
+	[11] = { .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, },
+	[12] = { .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, },
+	[13] = { .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, },
+	[14] = { .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, },
+	[15] = { .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, },
+};
+
+static int assign_irq_vector(int irq, cpumask_t mask);
 
 #define __apicdebuginit  __init
 
@@ -74,7 +103,7 @@ int nr_ioapic_registers[MAX_IO_APICS];
  * Rough estimation of how many shared IRQs there are, can
  * be changed anytime.
  */
-#define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS
+#define MAX_PLUS_SHARED_IRQS NR_IRQS
 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
 
 /*
@@ -149,11 +178,11 @@ static inline void io_apic_sync(unsigned int apic)
 		reg = io_apic_read(entry->apic, 0x10 + R + pin*2);	\
 		reg ACTION;						\
 		io_apic_modify(entry->apic, reg);			\
+		FINAL;							\
 		if (!entry->next)					\
 			break;						\
 		entry = irq_2_pin + entry->next;			\
 	}								\
-	FINAL;								\
 }
 
 union entry_union {
@@ -237,21 +266,19 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
 
 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
 {
+	struct irq_cfg *cfg = irq_cfg + irq;
 	unsigned long flags;
 	unsigned int dest;
 	cpumask_t tmp;
-	int vector;
 
 	cpus_and(tmp, mask, cpu_online_map);
 	if (cpus_empty(tmp))
-		tmp = TARGET_CPUS;
-
-	cpus_and(mask, tmp, CPU_MASK_ALL);
+		return;
 
-	vector = assign_irq_vector(irq, mask, &tmp);
-	if (vector < 0)
+	if (assign_irq_vector(irq, mask))
 		return;
 
+	cpus_and(tmp, cfg->domain, mask);
 	dest = cpu_mask_to_apicid(tmp);
 
 	/*
@@ -260,8 +287,8 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
 	dest = SET_APIC_LOGICAL_ID(dest);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	__target_IO_APIC_irq(irq, dest, vector);
-	set_native_irq_info(irq, mask);
+	__target_IO_APIC_irq(irq, dest, cfg->vector);
+	irq_desc[irq].affinity = mask;
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 #endif
@@ -615,63 +642,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 	return irq;
 }
 
-static inline int IO_APIC_irq_trigger(int irq)
-{
-	int apic, idx, pin;
-
-	for (apic = 0; apic < nr_ioapics; apic++) {
-		for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
-			idx = find_irq_entry(apic,pin,mp_INT);
-			if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
-				return irq_trigger(idx);
-		}
-	}
-	/*
-	 * nonexistent IRQs are edge default
-	 */
-	return 0;
-}
-
-/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = {
-	[0] = FIRST_EXTERNAL_VECTOR + 0,
-	[1] = FIRST_EXTERNAL_VECTOR + 1,
-	[2] = FIRST_EXTERNAL_VECTOR + 2,
-	[3] = FIRST_EXTERNAL_VECTOR + 3,
-	[4] = FIRST_EXTERNAL_VECTOR + 4,
-	[5] = FIRST_EXTERNAL_VECTOR + 5,
-	[6] = FIRST_EXTERNAL_VECTOR + 6,
-	[7] = FIRST_EXTERNAL_VECTOR + 7,
-	[8] = FIRST_EXTERNAL_VECTOR + 8,
-	[9] = FIRST_EXTERNAL_VECTOR + 9,
-	[10] = FIRST_EXTERNAL_VECTOR + 10,
-	[11] = FIRST_EXTERNAL_VECTOR + 11,
-	[12] = FIRST_EXTERNAL_VECTOR + 12,
-	[13] = FIRST_EXTERNAL_VECTOR + 13,
-	[14] = FIRST_EXTERNAL_VECTOR + 14,
-	[15] = FIRST_EXTERNAL_VECTOR + 15,
-};
-
-static cpumask_t irq_domain[NR_IRQ_VECTORS] __read_mostly = {
-	[0] = CPU_MASK_ALL,
-	[1] = CPU_MASK_ALL,
-	[2] = CPU_MASK_ALL,
-	[3] = CPU_MASK_ALL,
-	[4] = CPU_MASK_ALL,
-	[5] = CPU_MASK_ALL,
-	[6] = CPU_MASK_ALL,
-	[7] = CPU_MASK_ALL,
-	[8] = CPU_MASK_ALL,
-	[9] = CPU_MASK_ALL,
-	[10] = CPU_MASK_ALL,
-	[11] = CPU_MASK_ALL,
-	[12] = CPU_MASK_ALL,
-	[13] = CPU_MASK_ALL,
-	[14] = CPU_MASK_ALL,
-	[15] = CPU_MASK_ALL,
-};
-
-static int __assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
+static int __assign_irq_vector(int irq, cpumask_t mask)
 {
 	/*
 	 * NOTE! The local APIC isn't very good at handling
@@ -685,20 +656,25 @@ static int __assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
 	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
 	 */
 	static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0;
-	int old_vector = -1;
+	unsigned int old_vector;
 	int cpu;
+	struct irq_cfg *cfg;
 
-	BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
+	BUG_ON((unsigned)irq >= NR_IRQS);
+	cfg = &irq_cfg[irq];
 
 	/* Only try and allocate irqs on cpus that are present */
 	cpus_and(mask, mask, cpu_online_map);
 
-	if (irq_vector[irq] > 0)
-		old_vector = irq_vector[irq];
-	if (old_vector > 0) {
-		cpus_and(*result, irq_domain[irq], mask);
-		if (!cpus_empty(*result))
-			return old_vector;
+	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+		return -EBUSY;
+
+	old_vector = cfg->vector;
+	if (old_vector) {
+		cpumask_t tmp;
+		cpus_and(tmp, cfg->domain, mask);
+		if (!cpus_empty(tmp))
+			return 0;
 	}
 
 	for_each_cpu_mask(cpu, mask) {
@@ -728,48 +704,47 @@ next:
 		/* Found one! */
 		current_vector = vector;
 		current_offset = offset;
-		if (old_vector >= 0) {
-			cpumask_t old_mask;
-			int old_cpu;
-			cpus_and(old_mask, irq_domain[irq], cpu_online_map);
-			for_each_cpu_mask(old_cpu, old_mask)
-				per_cpu(vector_irq, old_cpu)[old_vector] = -1;
+		if (old_vector) {
+			cfg->move_in_progress = 1;
+			cfg->old_domain = cfg->domain;
 		}
 		for_each_cpu_mask(new_cpu, new_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;
-		irq_vector[irq] = vector;
-		irq_domain[irq] = domain;
-		cpus_and(*result, domain, mask);
-		return vector;
+		cfg->vector = vector;
+		cfg->domain = domain;
+		return 0;
 	}
 	return -ENOSPC;
 }
 
-static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
+static int assign_irq_vector(int irq, cpumask_t mask)
 {
-	int vector;
+	int err;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	vector = __assign_irq_vector(irq, mask, result);
+	err = __assign_irq_vector(irq, mask);
 	spin_unlock_irqrestore(&vector_lock, flags);
-	return vector;
+	return err;
 }
 
 static void __clear_irq_vector(int irq)
 {
+	struct irq_cfg *cfg;
 	cpumask_t mask;
 	int cpu, vector;
 
-	BUG_ON(!irq_vector[irq]);
+	BUG_ON((unsigned)irq >= NR_IRQS);
+	cfg = &irq_cfg[irq];
+	BUG_ON(!cfg->vector);
 
-	vector = irq_vector[irq];
-	cpus_and(mask, irq_domain[irq], cpu_online_map);
+	vector = cfg->vector;
+	cpus_and(mask, cfg->domain, cpu_online_map);
 	for_each_cpu_mask(cpu, mask)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
-	irq_vector[irq] = 0;
-	irq_domain[irq] = CPU_MASK_NONE;
+	cfg->vector = 0;
+	cfg->domain = CPU_MASK_NONE;
 }
 
 void __setup_vector_irq(int cpu)
@@ -779,10 +754,10 @@ void __setup_vector_irq(int cpu)
 	int irq, vector;
 
 	/* Mark the inuse vectors */
-	for (irq = 0; irq < NR_IRQ_VECTORS; ++irq) {
-		if (!cpu_isset(cpu, irq_domain[irq]))
+	for (irq = 0; irq < NR_IRQS; ++irq) {
+		if (!cpu_isset(cpu, irq_cfg[irq].domain))
 			continue;
-		vector = irq_vector[irq];
+		vector = irq_cfg[irq].vector;
 		per_cpu(vector_irq, cpu)[vector] = irq;
 	}
 	/* Mark the free vectors */
@@ -790,36 +765,45 @@ void __setup_vector_irq(int cpu)
 		irq = per_cpu(vector_irq, cpu)[vector];
 		if (irq < 0)
 			continue;
-		if (!cpu_isset(cpu, irq_domain[irq]))
+		if (!cpu_isset(cpu, irq_cfg[irq].domain))
 			per_cpu(vector_irq, cpu)[vector] = -1;
 	}
 }
 
 
-extern void (*interrupt[NR_IRQS])(void);
-
 static struct irq_chip ioapic_chip;
 
-#define IOAPIC_AUTO	-1
-#define IOAPIC_EDGE	0
-#define IOAPIC_LEVEL	1
-
-static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
+static void ioapic_register_intr(int irq, unsigned long trigger)
 {
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-			trigger == IOAPIC_LEVEL)
+	if (trigger)
 		set_irq_chip_and_handler_name(irq, &ioapic_chip,
 					      handle_fasteoi_irq, "fasteoi");
 	else
 		set_irq_chip_and_handler_name(irq, &ioapic_chip,
 					      handle_edge_irq, "edge");
 }
-static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
+
+static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq,
+			      int trigger, int polarity)
 {
+	struct irq_cfg *cfg = irq_cfg + irq;
 	struct IO_APIC_route_entry entry;
-	int vector;
-	unsigned long flags;
+	cpumask_t mask;
+
+	if (!IO_APIC_IRQ(irq))
+		return;
+
+	mask = TARGET_CPUS;
+	if (assign_irq_vector(irq, mask))
+		return;
+
+	cpus_and(mask, cfg->domain, mask);
 
+	apic_printk(APIC_VERBOSE,KERN_DEBUG
+		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
+		    "IRQ %d Mode:%i Active:%i)\n",
+		    apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector,
+		    irq, trigger, polarity);
 
 	/*
 	 * add it to the IO-APIC irq-routing table:
@@ -828,41 +812,23 @@ static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
 
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
+	entry.dest = cpu_mask_to_apicid(mask);
 	entry.mask = 0;				/* enable IRQ */
-	entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-
-	entry.trigger = irq_trigger(idx);
-	entry.polarity = irq_polarity(idx);
+	entry.trigger = trigger;
+	entry.polarity = polarity;
+	entry.vector = cfg->vector;
 
-	if (irq_trigger(idx)) {
-		entry.trigger = 1;
+	/* Mask level triggered irqs.
+	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
+	 */
+	if (trigger)
 		entry.mask = 1;
-		entry.dest = cpu_mask_to_apicid(TARGET_CPUS);
-	}
 
-	if (!apic && !IO_APIC_IRQ(irq))
-		return;
-
-	if (IO_APIC_IRQ(irq)) {
-		cpumask_t mask;
-		vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
-		if (vector < 0)
-			return;
-
-		entry.dest = cpu_mask_to_apicid(mask);
-		entry.vector = vector;
-
-		ioapic_register_intr(irq, vector, IOAPIC_AUTO);
-		if (!apic && (irq < 16))
-			disable_8259A_irq(irq);
-	}
+	ioapic_register_intr(irq, trigger);
+	if (irq < 16)
+		disable_8259A_irq(irq);
 
 	ioapic_write_entry(apic, pin, entry);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	set_native_irq_info(irq, TARGET_CPUS);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-
 }
 
 static void __init setup_IO_APIC_irqs(void)
@@ -887,8 +853,8 @@ static void __init setup_IO_APIC_irqs(void)
 		irq = pin_2_irq(idx, apic, pin);
 		add_pin_to_irq(irq, apic, pin);
 
-		setup_IO_APIC_irq(apic, pin, idx, irq);
-
+		setup_IO_APIC_irq(apic, pin, irq,
+				  irq_trigger(idx), irq_polarity(idx));
 	}
 	}
 
@@ -1373,16 +1339,15 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 
 static int ioapic_retrigger_irq(unsigned int irq)
 {
+	struct irq_cfg *cfg = &irq_cfg[irq];
 	cpumask_t mask;
-	unsigned vector;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	vector = irq_vector[irq];
 	cpus_clear(mask);
-	cpu_set(first_cpu(irq_domain[irq]), mask);
+	cpu_set(first_cpu(cfg->domain), mask);
 
-	send_IPI_mask(mask, vector);
+	send_IPI_mask(mask, cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
@@ -1397,8 +1362,68 @@ static int ioapic_retrigger_irq(unsigned int irq)
  * races.
  */
 
+#ifdef CONFIG_SMP
+asmlinkage void smp_irq_move_cleanup_interrupt(void)
+{
+	unsigned vector, me;
+	ack_APIC_irq();
+	exit_idle();
+	irq_enter();
+
+	me = smp_processor_id();
+	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+		unsigned int irq;
+		struct irq_desc *desc;
+		struct irq_cfg *cfg;
+		irq = __get_cpu_var(vector_irq)[vector];
+		if (irq >= NR_IRQS)
+			continue;
+
+		desc = irq_desc + irq;
+		cfg = irq_cfg + irq;
+		spin_lock(&desc->lock);
+		if (!cfg->move_cleanup_count)
+			goto unlock;
+
+		if ((vector == cfg->vector) && cpu_isset(me, cfg->domain))
+			goto unlock;
+
+		__get_cpu_var(vector_irq)[vector] = -1;
+		cfg->move_cleanup_count--;
+unlock:
+		spin_unlock(&desc->lock);
+	}
+
+	irq_exit();
+}
+
+static void irq_complete_move(unsigned int irq)
+{
+	struct irq_cfg *cfg = irq_cfg + irq;
+	unsigned vector, me;
+
+	if (likely(!cfg->move_in_progress))
+		return;
+
+	vector = ~get_irq_regs()->orig_rax;
+	me = smp_processor_id();
+	if ((vector == cfg->vector) &&
+	    cpu_isset(smp_processor_id(), cfg->domain)) {
+		cpumask_t cleanup_mask;
+
+		cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+		cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+		send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+		cfg->move_in_progress = 0;
+	}
+}
+#else
+static inline void irq_complete_move(unsigned int irq) {}
+#endif
+
 static void ack_apic_edge(unsigned int irq)
 {
+	irq_complete_move(irq);
 	move_native_irq(irq);
 	ack_APIC_irq();
 }
@@ -1407,6 +1432,7 @@ static void ack_apic_level(unsigned int irq)
 {
 	int do_unmask_irq = 0;
 
+	irq_complete_move(irq);
 #if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
 	/* If we are moving the irq we need to mask it */
 	if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
@@ -1457,7 +1483,7 @@ static inline void init_IO_APIC_traps(void)
 	 */
 	for (irq = 0; irq < NR_IRQS ; irq++) {
 		int tmp = irq;
-		if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
+		if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) {
 			/*
 			 * Hmm.. We don't have an entry for this,
 			 * so default to an old-fashioned 8259
@@ -1596,15 +1622,14 @@ static inline void unlock_ExtINT_logic(void)
  */
 static inline void check_timer(void)
 {
+	struct irq_cfg *cfg = irq_cfg + 0;
 	int apic1, pin1, apic2, pin2;
-	int vector;
-	cpumask_t mask;
 
 	/*
 	 * get/set the timer IRQ vector:
 	 */
 	disable_8259A_irq(0);
-	vector = assign_irq_vector(0, TARGET_CPUS, &mask);
+	assign_irq_vector(0, TARGET_CPUS);
 
 	/*
 	 * Subtle, code in do_timer_interrupt() expects an AEOI
@@ -1624,7 +1649,7 @@ static inline void check_timer(void)
 	apic2 = ioapic_i8259.apic;
 
 	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		vector, apic1, pin1, apic2, pin2);
+		cfg->vector, apic1, pin1, apic2, pin2);
 
 	if (pin1 != -1) {
 		/*
@@ -1655,7 +1680,7 @@ static inline void check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
+		setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector);
 		if (timer_irq_works()) {
 			apic_printk(APIC_VERBOSE," works.\n");
 			nmi_watchdog_default();
@@ -1680,14 +1705,14 @@ static inline void check_timer(void)
 
 	disable_8259A_irq(0);
 	irq_desc[0].chip = &lapic_irq_type;
-	apic_write(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
+	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
 		apic_printk(APIC_VERBOSE," works.\n");
 		return;
 	}
-	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
 	apic_printk(APIC_VERBOSE," failed.\n");
 
 	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
@@ -1834,19 +1859,16 @@ int create_irq(void)
 	/* Allocate an unused irq */
 	int irq;
 	int new;
-	int vector = 0;
 	unsigned long flags;
-	cpumask_t mask;
 
 	irq = -ENOSPC;
 	spin_lock_irqsave(&vector_lock, flags);
 	for (new = (NR_IRQS - 1); new >= 0; new--) {
 		if (platform_legacy_irq(new))
 			continue;
-		if (irq_vector[new] != 0)
+		if (irq_cfg[new].vector != 0)
 			continue;
-		vector = __assign_irq_vector(new, TARGET_CPUS, &mask);
-		if (likely(vector > 0))
+		if (__assign_irq_vector(new, TARGET_CPUS) == 0)
 			irq = new;
 		break;
 	}
@@ -1875,12 +1897,15 @@ void destroy_irq(unsigned int irq)
 #ifdef CONFIG_PCI_MSI
 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
 {
-	int vector;
+	struct irq_cfg *cfg = irq_cfg + irq;
+	int err;
 	unsigned dest;
 	cpumask_t tmp;
 
-	vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
-	if (vector >= 0) {
+	tmp = TARGET_CPUS;
+	err = assign_irq_vector(irq, tmp);
+	if (!err) {
+		cpus_and(tmp, cfg->domain, tmp);
 		dest = cpu_mask_to_apicid(tmp);
 
 		msg->address_hi = MSI_ADDR_BASE_HI;
@@ -1900,40 +1925,38 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms
 			((INT_DELIVERY_MODE != dest_LowestPrio) ?
 				MSI_DATA_DELIVERY_FIXED:
 				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(vector);
+			MSI_DATA_VECTOR(cfg->vector);
 	}
-	return vector;
+	return err;
 }
 
 #ifdef CONFIG_SMP
 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
 {
+	struct irq_cfg *cfg = irq_cfg + irq;
 	struct msi_msg msg;
 	unsigned int dest;
 	cpumask_t tmp;
-	int vector;
 
 	cpus_and(tmp, mask, cpu_online_map);
 	if (cpus_empty(tmp))
-		tmp = TARGET_CPUS;
-
-	cpus_and(mask, tmp, CPU_MASK_ALL);
+		return;
 
-	vector = assign_irq_vector(irq, mask, &tmp);
-	if (vector < 0)
+	if (assign_irq_vector(irq, mask))
 		return;
 
+	cpus_and(tmp, cfg->domain, mask);
 	dest = cpu_mask_to_apicid(tmp);
 
 	read_msi_msg(irq, &msg);
 
 	msg.data &= ~MSI_DATA_VECTOR_MASK;
-	msg.data |= MSI_DATA_VECTOR(vector);
+	msg.data |= MSI_DATA_VECTOR(cfg->vector);
 	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
 
 	write_msi_msg(irq, &msg);
-	set_native_irq_info(irq, mask);
+	irq_desc[irq].affinity = mask;
 }
 #endif /* CONFIG_SMP */
 
@@ -2004,24 +2027,22 @@ static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
 
 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
 {
+	struct irq_cfg *cfg = irq_cfg + irq;
 	unsigned int dest;
 	cpumask_t tmp;
-	int vector;
 
 	cpus_and(tmp, mask, cpu_online_map);
 	if (cpus_empty(tmp))
-		tmp = TARGET_CPUS;
-
-	cpus_and(mask, tmp, CPU_MASK_ALL);
+		return;
 
-	vector = assign_irq_vector(irq, mask, &tmp);
-	if (vector < 0)
+	if (assign_irq_vector(irq, mask))
 		return;
 
+	cpus_and(tmp, cfg->domain, mask);
 	dest = cpu_mask_to_apicid(tmp);
 
-	target_ht_irq(irq, dest, vector);
-	set_native_irq_info(irq, mask);
+	target_ht_irq(irq, dest, cfg->vector);
+	irq_desc[irq].affinity = mask;
 }
 #endif
 
@@ -2038,14 +2059,17 @@ static struct irq_chip ht_irq_chip = {
 
 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 {
-	int vector;
+	struct irq_cfg *cfg = irq_cfg + irq;
+	int err;
 	cpumask_t tmp;
 
-	vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
-	if (vector >= 0) {
+	tmp = TARGET_CPUS;
+	err = assign_irq_vector(irq, tmp);
+	if (!err) {
 		struct ht_irq_msg msg;
 		unsigned dest;
 
+		cpus_and(tmp, cfg->domain, tmp);
 		dest = cpu_mask_to_apicid(tmp);
 
 		msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
@@ -2053,7 +2077,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 		msg.address_lo =
 			HT_IRQ_LOW_BASE |
 			HT_IRQ_LOW_DEST_ID(dest) |
-			HT_IRQ_LOW_VECTOR(vector) |
+			HT_IRQ_LOW_VECTOR(cfg->vector) |
 			((INT_DEST_MODE == 0) ?
 				HT_IRQ_LOW_DM_PHYSICAL :
 				HT_IRQ_LOW_DM_LOGICAL) |
@@ -2068,7 +2092,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 		set_irq_chip_and_handler_name(irq, &ht_irq_chip,
 					      handle_edge_irq, "edge");
 	}
-	return vector;
+	return err;
 }
 #endif /* CONFIG_HT_IRQ */
 
@@ -2095,11 +2119,6 @@ int __init io_apic_get_redir_entries (int ioapic)
 
 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
 {
-	struct IO_APIC_route_entry entry;
-	unsigned long flags;
-	int vector;
-	cpumask_t mask;
-
 	if (!IO_APIC_IRQ(irq)) {
 		apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
 			ioapic);
@@ -2112,42 +2131,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int p
 	if (irq >= 16)
 		add_pin_to_irq(irq, ioapic, pin);
 
-
-	vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
-	if (vector < 0)
-		return vector;
-
-	/*
-	 * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
-	 * Note that we mask (disable) IRQs now -- these get enabled when the
-	 * corresponding device driver registers for this IRQ.
-	 */
-
-	memset(&entry,0,sizeof(entry));
-
-	entry.delivery_mode = INT_DELIVERY_MODE;
-	entry.dest_mode = INT_DEST_MODE;
-	entry.dest = cpu_mask_to_apicid(mask);
-	entry.trigger = triggering;
-	entry.polarity = polarity;
-	entry.mask = 1;					 /* Disabled (masked) */
-	entry.vector = vector & 0xff;
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
-		"IRQ %d Mode:%i Active:%i)\n", ioapic, 
-	       mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
-	       triggering, polarity);
-
-	ioapic_register_intr(irq, entry.vector, triggering);
-
-	if (!ioapic && (irq < 16))
-		disable_8259A_irq(irq);
-
-	ioapic_write_entry(ioapic, pin, entry);
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	set_native_irq_info(irq, TARGET_CPUS);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity);
 
 	return 0;
 }
@@ -2179,8 +2163,10 @@ void __init setup_ioapic_dest(void)
 			 * when you have too many devices, because at that time only boot
 			 * cpu is online.
 			 */
-			if(!irq_vector[irq])
-				setup_IO_APIC_irq(ioapic, pin, irq_entry, irq);
+			if (!irq_cfg[irq].vector)
+				setup_IO_APIC_irq(ioapic, pin, irq,
+						  irq_trigger(irq_entry),
+						  irq_polarity(irq_entry));
 			else
 				set_ioapic_affinity_irq(irq, TARGET_CPUS);
 		}
diff --git a/arch/x86_64/kernel/k8.c b/arch/x86_64/kernel/k8.c
index 6416682d33d0..bc11b32e8b4d 100644
--- a/arch/x86_64/kernel/k8.c
+++ b/arch/x86_64/kernel/k8.c
@@ -61,8 +61,8 @@ int cache_k8_northbridges(void)
 	dev = NULL;
 	i = 0;
 	while ((dev = next_k8_northbridge(dev)) != NULL) {
-		k8_northbridges[i++] = dev;
-		pci_read_config_dword(dev, 0x9c, &flush_words[i]);
+		k8_northbridges[i] = dev;
+		pci_read_config_dword(dev, 0x9c, &flush_words[i++]);
 	}
 	k8_northbridges[i] = NULL;
 	return 0;
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index 50dd8bef850e..455aa0b932f0 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -60,9 +60,9 @@ unsigned long mp_lapic_addr = 0;
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_id = -1U;
 /* Internal processor count */
-unsigned int num_processors __initdata = 0;
+unsigned int num_processors __cpuinitdata = 0;
 
-unsigned disabled_cpus __initdata;
+unsigned disabled_cpus __cpuinitdata;
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index 486f4c61a948..dfab9f167366 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -39,15 +39,17 @@ int panic_on_unrecovered_nmi;
  *   different subsystems this reservation system just tries to coordinate
  *   things a little
  */
-static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner);
-static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]);
-
-static cpumask_t backtrace_mask = CPU_MASK_NONE;
 
 /* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
  * offset from MSR_P4_BSU_ESCR0.  It will be the max for all platforms (for now)
  */
 #define NMI_MAX_COUNTER_BITS 66
+#define NMI_MAX_COUNTER_LONGS BITS_TO_LONGS(NMI_MAX_COUNTER_BITS)
+
+static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[NMI_MAX_COUNTER_LONGS]);
+
+static cpumask_t backtrace_mask = CPU_MASK_NONE;
 
 /* nmi_active:
  * >0: the lapic NMI watchdog is active, but can be disabled
@@ -108,64 +110,128 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 /* checks for a bit availability (hack for oprofile) */
 int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
 {
+	int cpu;
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
-
-	return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+	for_each_possible_cpu (cpu) {
+		if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
+			return 0;
+	}
+	return 1;
 }
 
 /* checks the an msr for availability */
 int avail_to_resrv_perfctr_nmi(unsigned int msr)
 {
 	unsigned int counter;
+	int cpu;
 
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
+	for_each_possible_cpu (cpu) {
+		if (test_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
+			return 0;
+	}
+	return 1;
 }
 
-int reserve_perfctr_nmi(unsigned int msr)
+static int __reserve_perfctr_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
+	if (!test_and_set_bit(counter, &per_cpu(perfctr_nmi_owner, cpu)))
 		return 1;
 	return 0;
 }
 
-void release_perfctr_nmi(unsigned int msr)
+static void __release_perfctr_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
+	clear_bit(counter, &per_cpu(perfctr_nmi_owner, cpu));
 }
 
-int reserve_evntsel_nmi(unsigned int msr)
+int reserve_perfctr_nmi(unsigned int msr)
+{
+	int cpu, i;
+	for_each_possible_cpu (cpu) {
+		if (!__reserve_perfctr_nmi(cpu, msr)) {
+			for_each_possible_cpu (i) {
+				if (i >= cpu)
+					break;
+				__release_perfctr_nmi(i, msr);
+			}
+			return 0;
+		}
+	}
+	return 1;
+}
+
+void release_perfctr_nmi(unsigned int msr)
+{
+	int cpu;
+	for_each_possible_cpu (cpu)
+		__release_perfctr_nmi(cpu, msr);
+}
+
+int __reserve_evntsel_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_evntsel_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)))
+	if (!test_and_set_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]))
 		return 1;
 	return 0;
 }
 
-void release_evntsel_nmi(unsigned int msr)
+static void __release_evntsel_nmi(int cpu, unsigned int msr)
 {
 	unsigned int counter;
+	if (cpu < 0)
+		cpu = smp_processor_id();
 
 	counter = nmi_evntsel_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner));
+	clear_bit(counter, &per_cpu(evntsel_nmi_owner, cpu)[0]);
+}
+
+int reserve_evntsel_nmi(unsigned int msr)
+{
+	int cpu, i;
+	for_each_possible_cpu (cpu) {
+		if (!__reserve_evntsel_nmi(cpu, msr)) {
+			for_each_possible_cpu (i) {
+				if (i >= cpu)
+					break;
+				__release_evntsel_nmi(i, msr);
+			}
+			return 0;
+		}
+	}
+	return 1;
+}
+
+void release_evntsel_nmi(unsigned int msr)
+{
+	int cpu;
+	for_each_possible_cpu (cpu) {
+		__release_evntsel_nmi(cpu, msr);
+	}
 }
 
 static __cpuinit inline int nmi_known_cpu(void)
@@ -187,10 +253,7 @@ void nmi_watchdog_default(void)
 {
 	if (nmi_watchdog != NMI_DEFAULT)
 		return;
-	if (nmi_known_cpu())
-		nmi_watchdog = NMI_LOCAL_APIC;
-	else
-		nmi_watchdog = NMI_IO_APIC;
+	nmi_watchdog = NMI_NONE;
 }
 
 static int endflag __initdata = 0;
@@ -256,7 +319,7 @@ int __init check_nmi_watchdog (void)
 	for (cpu = 0; cpu < NR_CPUS; cpu++)
 		counts[cpu] = cpu_pda(cpu)->__nmi_count;
 	local_irq_enable();
-	mdelay((10*1000)/nmi_hz); // wait 10 ticks
+	mdelay((20*1000)/nmi_hz); // wait 20 ticks
 
 	for_each_online_cpu(cpu) {
 		if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
@@ -475,10 +538,10 @@ static int setup_k7_watchdog(void)
 
 	perfctr_msr = MSR_K7_PERFCTR0;
 	evntsel_msr = MSR_K7_EVNTSEL0;
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	/* Simulator may not support it */
@@ -504,9 +567,9 @@ static int setup_k7_watchdog(void)
 	wd->check_bit = 1ULL<<63;
 	return 1;
 fail2:
-	release_evntsel_nmi(evntsel_msr);
+	__release_evntsel_nmi(-1, evntsel_msr);
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -517,8 +580,8 @@ static void stop_k7_watchdog(void)
 
 	wrmsr(wd->evntsel_msr, 0, 0);
 
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 /* Note that these events don't tick when the CPU idles. This means
@@ -584,10 +647,10 @@ static int setup_p4_watchdog(void)
 		cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
 	}
 
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
@@ -612,7 +675,7 @@ static int setup_p4_watchdog(void)
 	wd->check_bit = 1ULL<<39;
 	return 1;
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -624,8 +687,8 @@ static void stop_p4_watchdog(void)
 	wrmsr(wd->cccr_msr, 0, 0);
 	wrmsr(wd->evntsel_msr, 0, 0);
 
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 #define ARCH_PERFMON_NMI_EVENT_SEL	ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
@@ -653,10 +716,10 @@ static int setup_intel_arch_watchdog(void)
 	perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
 	evntsel_msr = MSR_ARCH_PERFMON_EVENTSEL0;
 
-	if (!reserve_perfctr_nmi(perfctr_msr))
+	if (!__reserve_perfctr_nmi(-1, perfctr_msr))
 		goto fail;
 
-	if (!reserve_evntsel_nmi(evntsel_msr))
+	if (!__reserve_evntsel_nmi(-1, evntsel_msr))
 		goto fail1;
 
 	wrmsrl(perfctr_msr, 0UL);
@@ -683,7 +746,7 @@ static int setup_intel_arch_watchdog(void)
 	wd->check_bit = 1ULL << (eax.split.bit_width - 1);
 	return 1;
 fail1:
-	release_perfctr_nmi(perfctr_msr);
+	__release_perfctr_nmi(-1, perfctr_msr);
 fail:
 	return 0;
 }
@@ -707,8 +770,8 @@ static void stop_intel_arch_watchdog(void)
 
 	wrmsr(wd->evntsel_msr, 0, 0);
 
-	release_evntsel_nmi(wd->evntsel_msr);
-	release_perfctr_nmi(wd->perfctr_msr);
+	__release_evntsel_nmi(-1, wd->evntsel_msr);
+	__release_perfctr_nmi(-1, wd->perfctr_msr);
 }
 
 void setup_apic_nmi_watchdog(void *unused)
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index 030eb3753358..0bae862e9a55 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -519,7 +519,11 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 	gatt_size = (aper_size >> PAGE_SHIFT) * sizeof(u32); 
 	gatt = (void *)__get_free_pages(GFP_KERNEL, get_order(gatt_size)); 
 	if (!gatt) 
-		panic("Cannot allocate GATT table"); 
+		panic("Cannot allocate GATT table");
+	if (change_page_attr_addr((unsigned long)gatt, gatt_size >> PAGE_SHIFT, PAGE_KERNEL_NOCACHE))
+		panic("Could not set GART PTEs to uncacheable pages");
+	global_flush_tlb();
+
 	memset(gatt, 0, gatt_size); 
 	agp_gatt_table = gatt;
 
@@ -675,7 +679,7 @@ void __init gart_iommu_init(void)
 	dma_ops = &gart_dma_ops;
 } 
 
-void gart_parse_options(char *p)
+void __init gart_parse_options(char *p)
 {
 	int arg;
 
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index cbbc6adc1a92..d8d5ccc245c8 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -382,14 +382,17 @@ void exit_thread(void)
 void flush_thread(void)
 {
 	struct task_struct *tsk = current;
-	struct thread_info *t = current_thread_info();
 
-	if (t->flags & _TIF_ABI_PENDING) {
-		t->flags ^= (_TIF_ABI_PENDING | _TIF_IA32);
-		if (t->flags & _TIF_IA32)
+	if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
+		clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
+		if (test_tsk_thread_flag(tsk, TIF_IA32)) {
+			clear_tsk_thread_flag(tsk, TIF_IA32);
+		} else {
+			set_tsk_thread_flag(tsk, TIF_IA32);
 			current_thread_info()->status |= TS_COMPAT;
+		}
 	}
-	t->flags &= ~_TIF_DEBUG;
+	clear_tsk_thread_flag(tsk, TIF_DEBUG);
 
 	tsk->thread.debugreg0 = 0;
 	tsk->thread.debugreg1 = 0;
diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
index 35443729aad8..cd4643a37022 100644
--- a/arch/x86_64/kernel/smpboot.c
+++ b/arch/x86_64/kernel/smpboot.c
@@ -923,8 +923,9 @@ void __init smp_prepare_boot_cpu(void)
  */
 int __cpuinit __cpu_up(unsigned int cpu)
 {
-	int err;
 	int apicid = cpu_present_to_apicid(cpu);
+	unsigned long flags;
+	int err;
 
 	WARN_ON(irqs_disabled());
 
@@ -958,7 +959,9 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	/*
   	 * Make sure and check TSC sync:
  	 */
+	local_irq_save(flags);
 	check_tsc_sync_source(cpu);
+	local_irq_restore(flags);
 
 	while (!cpu_isset(cpu, cpu_online_map))
 		cpu_relax();
diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c
index a87c51705620..75d73a9aa9ff 100644
--- a/arch/x86_64/kernel/time.c
+++ b/arch/x86_64/kernel/time.c
@@ -358,6 +358,8 @@ void __init time_init(void)
 	set_cyc2ns_scale(cpu_khz);
 	printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
 		cpu_khz / 1000, cpu_khz % 1000);
+	init_tsc_clocksource();
+
 	setup_irq(0, &irq0);
 }
 
@@ -418,7 +420,7 @@ static struct sysdev_class timer_sysclass = {
 	set_kset_name("timer"),
 };
 
-/* XXX this driverfs stuff should probably go elsewhere later -john */
+/* XXX this sysfs stuff should probably go elsewhere later -john */
 static struct sys_device device_timer = {
 	.id	= 0,
 	.cls	= &timer_sysclass,
diff --git a/arch/x86_64/kernel/tsc.c b/arch/x86_64/kernel/tsc.c
index 895831865019..1a0edbbffaa0 100644
--- a/arch/x86_64/kernel/tsc.c
+++ b/arch/x86_64/kernel/tsc.c
@@ -210,7 +210,7 @@ void mark_tsc_unstable(void)
 }
 EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 
-static int __init init_tsc_clocksource(void)
+void __init init_tsc_clocksource(void)
 {
 	if (!notsc) {
 		clocksource_tsc.mult = clocksource_khz2mult(cpu_khz,
@@ -218,9 +218,6 @@ static int __init init_tsc_clocksource(void)
 		if (check_tsc_unstable())
 			clocksource_tsc.rating = 0;
 
-		return clocksource_register(&clocksource_tsc);
+		clocksource_register(&clocksource_tsc);
 	}
-	return 0;
 }
-
-module_init(init_tsc_clocksource);
diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S
index b73212c0a550..5176ecf006ee 100644
--- a/arch/x86_64/kernel/vmlinux.lds.S
+++ b/arch/x86_64/kernel/vmlinux.lds.S
@@ -13,7 +13,7 @@ OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
 OUTPUT_ARCH(i386:x86-64)
 ENTRY(phys_startup_64)
 jiffies_64 = jiffies;
-_proxy_pda = 0;
+_proxy_pda = 1;
 PHDRS {
 	text PT_LOAD FLAGS(5);	/* R_E */
 	data PT_LOAD FLAGS(7);	/* RWE */
diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c
index 180ff919eaf9..b43c698cf7d3 100644
--- a/arch/x86_64/kernel/vsyscall.c
+++ b/arch/x86_64/kernel/vsyscall.c
@@ -112,7 +112,7 @@ static __always_inline void do_vgettimeofday(struct timeval * tv)
 
 		vread = __vsyscall_gtod_data.clock.vread;
 		if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) {
-			gettimeofday(tv,0);
+			gettimeofday(tv,NULL);
 			return;
 		}
 		now = vread();
diff --git a/arch/x86_64/kernel/x8664_ksyms.c b/arch/x86_64/kernel/x8664_ksyms.c
index 0dffae69f4ad..77c25b307635 100644
--- a/arch/x86_64/kernel/x8664_ksyms.c
+++ b/arch/x86_64/kernel/x8664_ksyms.c
@@ -59,3 +59,4 @@ EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(init_level4_pgt);
 EXPORT_SYMBOL(load_gs_index);
 
+EXPORT_SYMBOL(_proxy_pda);
diff --git a/arch/x86_64/lib/Makefile b/arch/x86_64/lib/Makefile
index 8d5f835af481..c94327178398 100644
--- a/arch/x86_64/lib/Makefile
+++ b/arch/x86_64/lib/Makefile
@@ -5,6 +5,7 @@
 CFLAGS_csum-partial.o := -funroll-loops
 
 obj-y := io.o iomap_copy.o
+obj-$(CONFIG_SMP)	+= msr-on-cpu.o
 
 lib-y := csum-partial.o csum-copy.o csum-wrappers.o delay.o \
 	usercopy.o getuser.o putuser.o  \
diff --git a/arch/x86_64/lib/msr-on-cpu.c b/arch/x86_64/lib/msr-on-cpu.c
new file mode 100644
index 000000000000..47e0ec47c376
--- /dev/null
+++ b/arch/x86_64/lib/msr-on-cpu.c
@@ -0,0 +1 @@
+#include "../../i386/lib/msr-on-cpu.c"
diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c
index 65c5eaa59905..081409aa3452 100644
--- a/arch/x86_64/mm/pageattr.c
+++ b/arch/x86_64/mm/pageattr.c
@@ -81,8 +81,8 @@ static void flush_kernel_map(void *arg)
 		void *adr = page_address(pg);
 		if (cpu_has_clflush)
 			cache_flush_page(adr);
-		__flush_tlb_one(adr);
 	}
+	__flush_tlb_all();
 }
 
 static inline void flush_map(struct list_head *l)
diff --git a/arch/xtensa/lib/Makefile b/arch/xtensa/lib/Makefile
index ed935b58e8a4..6c4fdd86acd8 100644
--- a/arch/xtensa/lib/Makefile
+++ b/arch/xtensa/lib/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Xtensa-specific library files.
 #
 
-lib-y	+= memcopy.o memset.o checksum.o strcasecmp.o \
+lib-y	+= memcopy.o memset.o checksum.o \
 	   usercopy.o strncpy_user.o strnlen_user.o
 lib-$(CONFIG_PCI) += pci-auto.o
diff --git a/arch/xtensa/lib/strcasecmp.c b/arch/xtensa/lib/strcasecmp.c
deleted file mode 100644
index 165b2d6effa5..000000000000
--- a/arch/xtensa/lib/strcasecmp.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  linux/arch/xtensa/lib/strcasecmp.c
- *
- *  This file is subject to the terms and conditions of the GNU General
- *  Public License.  See the file "COPYING" in the main directory of
- *  this archive for more details.
- *
- *  Copyright (C) 2002 Tensilica Inc.
- */
-
-#include <linux/string.h>
-
-
-/* We handle nothing here except the C locale.  Since this is used in
-   only one place, on strings known to contain only 7 bit ASCII, this
-   is ok.  */
-
-int strcasecmp(const char *a, const char *b)
-{
-	int ca, cb;
-
-	do {
-		ca = *a++ & 0xff;
-		cb = *b++ & 0xff;
-		if (ca >= 'A' && ca <= 'Z')
-			ca += 'a' - 'A';
-		if (cb >= 'A' && cb <= 'Z')
-			cb += 'a' - 'A';
-	} while (ca == cb && ca != '\0');
-
-	return ca - cb;
-}
diff --git a/arch/xtensa/platform-iss/network.c b/arch/xtensa/platform-iss/network.c
index 8ebfc8761229..ab05bff40104 100644
--- a/arch/xtensa/platform-iss/network.c
+++ b/arch/xtensa/platform-iss/network.c
@@ -386,7 +386,7 @@ static int iss_net_rx(struct net_device *dev)
 	/* Setup skb */
 
 	skb->dev = dev;
-	skb->mac.raw = skb->data;
+	skb_reset_mac_header(skb);
 	pkt_len = lp->tp.read(lp, &skb);
 	skb_put(skb, pkt_len);