1 files changed, 0 insertions, 143 deletions
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91rm9200/board-kb9202.c
deleted file mode 100644
index 759d8191854f..000000000000
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
- *
- *  Copyright (c) 2005 kb_admin
- *  		       KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kb9202_uart_config = {
-	.console_tty	= 0,					/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 }			/* ttyS0, ..., ttyS4 */
-};
-
-static void __init kb9202_map_io(void)
-{
-	/* Initialize processor: 10 MHz crystal */
-	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
-
-	/* Set up the LEDs */
-	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&kb9202_uart_config);
-}
-
-static void __init kb9202_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata kb9202_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PB29,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
-	.ports		= 1,
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
-	.vbus_pin	= AT91_PIN_PB24,
-	.pullup_pin	= AT91_PIN_PB22,
-};
-
-static struct at91_mmc_data __initdata kb9202_mmc_data = {
-	.det_pin	= AT91_PIN_PB2,
-	.slot_b		= 0,
-	.wire4		= 1,
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
-	{
-		.name	= "nand_fs",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
-	return kb9202_nand_partition;
-}
-
-static struct at91_nand_data __initdata kb9202_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	// .det_pin	= ... not there
-	.rdy_pin	= AT91_PIN_PC29,
-	.enable_pin	= AT91_PIN_PC28,
-	.partition_info	= nand_partitions,
-};
-
-static void __init kb9202_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&kb9202_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&kb9202_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&kb9202_udc_data);
-	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* SPI */
-	at91_add_device_spi(NULL, 0);
-	/* NAND */
-	at91_add_device_nand(&kb9202_nand_data);
-}
-
-MACHINE_START(KB9200, "KB920x")
-	/* Maintainer: KwikByte, Inc. */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= kb9202_map_io,
-	.init_irq	= kb9202_init_irq,
-	.init_machine	= kb9202_board_init,
-MACHINE_END