diff options
Diffstat (limited to 'drivers/staging/rt2860/common/mlme.c')
| -rw-r--r-- | drivers/staging/rt2860/common/mlme.c | 289 |
1 files changed, 226 insertions, 63 deletions
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 229747095aec..c00f9ab9c46c 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -527,7 +527,6 @@ NDIS_STATUS MlmeInit( #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) @@ -537,7 +536,6 @@ NDIS_STATUS MlmeInit( RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE); } } -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // } while (FALSE); @@ -711,13 +709,11 @@ VOID MlmeHalt( RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); } -#endif // RT2860 // #ifdef QOS_DLS_SUPPORT for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) @@ -808,21 +804,34 @@ VOID MlmePeriodicExec( ULONG TxTotalCnt; PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext; + //Baron 2008/07/10 + //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); + //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. + //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1. + if(pAd->StaCfg.WepStatus<2) + { + pAd->StaCfg.WpaSupplicantUP = 0; + } + else + { + pAd->StaCfg.WpaSupplicantUP = 1; + } + #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. // Move code to here, because following code will return when radio is off - if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && (pAd->StaCfg.bHardwareRadio == TRUE) && + if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && + (pAd->StaCfg.bHardwareRadio == TRUE) && + (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && - (pAd->bPCIclkOff == FALSE)) + (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))) { UINT32 data = 0; // Read GPIO pin2 as Hardware controlled radio state - RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data); + RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data); if (data & 0x04) { pAd->StaCfg.bHwRadio = TRUE; @@ -849,7 +858,6 @@ VOID MlmePeriodicExec( } } } -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // // Do nothing if the driver is starting halt state. @@ -860,6 +868,45 @@ VOID MlmePeriodicExec( fRTMP_ADAPTER_RESET_IN_PROGRESS)))) return; + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE)) + { + // If ReceiveByteCount doesn't change, increase SameRxByteCount by 1. + pAd->SameRxByteCount++; + } + else + pAd->SameRxByteCount = 0; + + // If after BBP, still not work...need to check to reset PBF&MAC. + if (pAd->SameRxByteCount == 702) + { + pAd->SameRxByteCount = 0; + AsicResetPBF(pAd); + AsicResetMAC(pAd); + } + + // If SameRxByteCount keeps happens for 2 second in infra mode, or for 60 seconds in idle mode. + if (((INFRA_ON(pAd)) && (pAd->SameRxByteCount > 20)) || ((IDLE_ON(pAd)) && (pAd->SameRxByteCount > 600))) + { + if ((pAd->StaCfg.bRadio == TRUE) && (pAd->SameRxByteCount < 700)) + { + DBGPRINT(RT_DEBUG_TRACE, ("---> SameRxByteCount = %lu !!!!!!!!!!!!!!! \n", pAd->SameRxByteCount)); + pAd->SameRxByteCount = 700; + AsicResetBBP(pAd); + } + } + + // Update lastReceiveByteCount. + pAd->RalinkCounters.LastReceivedByteCount = pAd->RalinkCounters.ReceivedByteCount; + + if ((pAd->CheckDmaBusyCount > 3) && (IDLE_ON(pAd))) + { + pAd->CheckDmaBusyCount = 0; + AsicResetFromDMABusy(pAd); + } + } + RT28XX_MLME_PRE_SANITY_CHECK(pAd); #ifdef RALINK_ATE @@ -1022,9 +1069,7 @@ VOID MlmePeriodicExec( #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef RT2860 if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE)) -#endif // RT2860 // { // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock // and sending CTS-to-self over and over. @@ -1081,6 +1126,19 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.bBlockAssoc = FALSE; } + //Baron 2008/07/10 + //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); + //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. + //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1. + if(pAd->StaCfg.WepStatus<2) + { + pAd->StaCfg.WpaSupplicantUP = 0; + } + else + { + pAd->StaCfg.WpaSupplicantUP = 1; + } + if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent)) { if (pAd->IndicateMediaState == NdisMediaStateConnected) @@ -1090,6 +1148,15 @@ VOID STAMlmePeriodicExec( pAd->PreMediaState = pAd->IndicateMediaState; } + if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) && + (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && + (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) && + (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) && + (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) && + (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))) + { + RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0); + } @@ -2781,7 +2848,7 @@ VOID MlmeCheckPsmChange( if (INFRA_ON(pAd) && (PowerMode != Ndis802_11PowerModeCAM) && (pAd->StaCfg.Psm == PWR_ACTIVE) && - (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)) + RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)) { NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime); pAd->RalinkCounters.RxCountSinceLastNULL = 0; @@ -4065,7 +4132,9 @@ VOID BssTableSsidSort( continue; // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) + if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && + (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) && + (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled)) continue; // check pairwise cipher, skip if none matched @@ -4084,7 +4153,9 @@ VOID BssTableSsidSort( continue; // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) + if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && + (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) && + (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled)) continue; // check pairwise cipher, skip if none matched @@ -4371,8 +4442,10 @@ VOID BssCipherParse( switch (*pTmp) { case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; + pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled; + break; + case 5: + pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled; break; case 2: pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4489,8 +4562,10 @@ VOID BssCipherParse( switch (pCipher->Type) { case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled; + pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled; + break; + case 5: + pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled; break; case 2: pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4953,16 +5028,13 @@ BOOLEAN MlmeDequeue( VOID MlmeRestartStateMachine( IN PRTMP_ADAPTER pAd) { -#ifdef RT2860 MLME_QUEUE_ELEM *Elem = NULL; -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT BOOLEAN Cancelled; #endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n")); -#ifdef RT2860 NdisAcquireSpinLock(&pAd->Mlme.TaskLock); if(pAd->Mlme.bRunning) { @@ -4990,7 +5062,6 @@ VOID MlmeRestartStateMachine( DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n")); } } -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) @@ -5039,12 +5110,10 @@ VOID MlmeRestartStateMachine( } #endif // CONFIG_STA_SUPPORT // -#ifdef RT2860 // Remove running state NdisAcquireSpinLock(&pAd->Mlme.TaskLock); pAd->Mlme.bRunning = FALSE; NdisReleaseSpinLock(&pAd->Mlme.TaskLock); -#endif // RT2860 // } /*! \brief test if the MLME Queue is empty @@ -6149,6 +6218,12 @@ VOID AsicAdjustTxPower( ULONG TxPwr[5]; CHAR Value; + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) + || (pAd->bPCIclkOff == TRUE) + || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF) + || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) + return; + if (pAd->CommonCfg.BBPCurrentBW == BW_40) { if (pAd->CommonCfg.CentralChannel > 14) @@ -6493,10 +6568,10 @@ VOID AsicForceSleep( */ VOID AsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx) + IN UCHAR Level) { DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n")); - RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx); + RT28XX_STA_FORCE_WAKEUP(pAd, Level); } #endif // CONFIG_STA_SUPPORT // /* @@ -6710,7 +6785,6 @@ VOID AsicEnableIbssSync( csr9.field.bTsfTicking = 0; RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word); -#ifdef RT2860 // move BEACON TXD and frame content to on-chip memory ptr = (PUCHAR)&pAd->BeaconTxWI; for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field @@ -6728,7 +6802,6 @@ VOID AsicEnableIbssSync( RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); ptr +=4; } -#endif // RT2860 // // start sending BEACON csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU @@ -7097,9 +7170,7 @@ VOID AsicAddSharedKeyEntry( { ULONG offset; //, csr0; SHAREDKEY_MODE_STRUC csr1; -#ifdef RT2860 INT i; -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx)); //============================================================================================ @@ -7121,7 +7192,6 @@ VOID AsicAddSharedKeyEntry( // // fill key material - key + TX MIC + RX MIC // -#ifdef RT2860 offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE; for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++) { @@ -7145,7 +7215,6 @@ VOID AsicAddSharedKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } } -#endif // RT2860 // // @@ -7320,9 +7389,7 @@ VOID AsicAddKeyEntry( PUCHAR pTxtsc = pCipherKey->TxTsc; UCHAR CipherAlg = pCipherKey->CipherAlg; SHAREDKEY_MODE_STRUC csr1; -#ifdef RT2860 UCHAR i; -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n")); // @@ -7337,7 +7404,6 @@ VOID AsicAddKeyEntry( // 2.) Set Key to Asic // //for (i = 0; i < KeyLen; i++) -#ifdef RT2860 for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); @@ -7363,7 +7429,6 @@ VOID AsicAddKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } } -#endif // RT2860 // // @@ -7372,7 +7437,6 @@ VOID AsicAddKeyEntry( // if (bTxKey) { -#ifdef RT2860 offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE); // // Write IV @@ -7395,7 +7459,6 @@ VOID AsicAddKeyEntry( { RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]); } -#endif // RT2860 // AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable); } @@ -7461,12 +7524,10 @@ VOID AsicAddPairwiseKeyEntry( // EKEY offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE); -#ifdef RT2860 for (i=0; i<MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); } -#endif // RT2860 // for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4) { UINT32 Value; @@ -7478,22 +7539,18 @@ VOID AsicAddPairwiseKeyEntry( // MIC KEY if (pTxMic) { -#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]); } -#endif // RT2860 // } offset += 8; if (pRxMic) { -#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]); } -#endif // RT2860 // } DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg])); @@ -7542,11 +7599,9 @@ BOOLEAN AsicSendCommandToMcu( HOST_CMD_CSR_STRUC H2MCmd; H2M_MAILBOX_STRUC H2MMailbox; ULONG i = 0; -#ifdef RT2860 #ifdef RALINK_ATE static UINT32 j = 0; #endif // RALINK_ATE // -#endif // RT2860 // do { RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word); @@ -7558,7 +7613,6 @@ BOOLEAN AsicSendCommandToMcu( if (i >= 100) { -#ifdef RT2860 #ifdef RALINK_ATE if (pAd->ate.bFWLoading == TRUE) { @@ -7583,14 +7637,33 @@ BOOLEAN AsicSendCommandToMcu( } else #endif // RALINK_ATE // -#endif // RT2860 // { + UINT32 Data; + + // Reset DMA + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x2; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too. + // Reset DMA/CPU ring index + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + // Clear Reset + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data &= 0xfffffffd; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n")); } - return FALSE; + //return FALSE; } -#ifdef RT2860 #ifdef RALINK_ATE else if (pAd->ate.bFWLoading == TRUE) { @@ -7600,7 +7673,6 @@ BOOLEAN AsicSendCommandToMcu( j = 0; } #endif // RALINK_ATE // -#endif // RT2860 // H2MMailbox.field.Owner = 1; // pass ownership to MCU H2MMailbox.field.CmdToken = Token; @@ -7619,7 +7691,6 @@ BOOLEAN AsicSendCommandToMcu( return TRUE; } -#ifdef RT2860 BOOLEAN AsicCheckCommanOk( IN PRTMP_ADAPTER pAd, IN UCHAR Command) @@ -7684,7 +7755,6 @@ BOOLEAN AsicCheckCommanOk( return FALSE; } -#endif // RT2860 // /* ======================================================================== @@ -8096,10 +8166,8 @@ VOID AsicEvaluateRxAnt( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) pAd->StaCfg.BBPR3 = BBPR3; -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) @@ -8211,9 +8279,7 @@ VOID AsicRxAntEvalTimeout( BBPR3 |= (0x0); } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef RT2860 - pAd->StaCfg.BBPR3 = BBPR3; -#endif // RT2860 // + pAd->StaCfg.BBPR3 = BBPR3; } #endif // CONFIG_STA_SUPPORT // @@ -8439,10 +8505,7 @@ VOID AsicStaBbpTuning( && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) && !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) -#ifdef RT2860 - && (pAd->bPCIclkOff == FALSE) -#endif // RT2860 // - ) + && (pAd->bPCIclkOff == FALSE)) { RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value); R66 = OrigR66Value; @@ -8518,6 +8581,106 @@ VOID AsicStaBbpTuning( } } + +VOID AsicResetFromDMABusy( + IN PRTMP_ADAPTER pAd) +{ + UINT32 Data; + BOOLEAN bCtrl = FALSE; + + DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n")); + + // Be sure restore link control value so we can write register. + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + DBGPRINT(RT_DEBUG_TRACE,("AsicResetFromDMABusy==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + bCtrl = TRUE; + } + // Reset DMA + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x2; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too. + // Reset DMA/CPU ring index + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + // Clear Reset + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data &= 0xfffffffd; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // If in Radio off, should call RTMPPCIePowerLinkCtrl again. + if ((bCtrl == TRUE) && (pAd->StaCfg.bRadio == FALSE)) + RTMPPCIeLinkCtrlSetting(pAd, 3); + + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS); + DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + +VOID AsicResetBBP( + IN PRTMP_ADAPTER pAd) +{ + DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n")); + + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x2); + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc); + + // After hard-reset BBP, initialize all BBP values. + NICRestoreBBPValue(pAd); + DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + +VOID AsicResetMAC( + IN PRTMP_ADAPTER pAd) +{ + ULONG Data; + + DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetMAC !!!! \n")); + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x4; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + Data &= 0xfffffffb; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetMAC !!!! \n")); +} + +VOID AsicResetPBF( + IN PRTMP_ADAPTER pAd) +{ + ULONG Value1, Value2; + ULONG Data; + + RTMP_IO_READ32(pAd, TXRXQ_PCNT, &Value1); + RTMP_IO_READ32(pAd, PBF_DBG, &Value2); + + Value2 &= 0xff; + // sum should be equals to 0xff, which is the total buffer size. + if ((Value1 + Value2) < 0xff) + { + DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset PBF !!!! \n")); + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x8; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + Data &= 0xfffffff7; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset PBF !!!! \n")); + } +} #endif // CONFIG_STA_SUPPORT // VOID RTMPSetAGCInitValue( |