diff options
Diffstat (limited to 'drivers/staging/rt2860')
32 files changed, 726 insertions, 597 deletions
diff --git a/drivers/staging/rt2860/2860_main_dev.c b/drivers/staging/rt2860/2860_main_dev.c index 08ca81f43cc8..ff7f83380736 100644 --- a/drivers/staging/rt2860/2860_main_dev.c +++ b/drivers/staging/rt2860/2860_main_dev.c @@ -90,12 +90,10 @@ void init_thread_task(PRTMP_ADAPTER pAd); static void __exit rt2860_cleanup_module(void); static int __init rt2860_init_module(void); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #ifdef CONFIG_PM static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state); static int rt2860_resume(struct pci_dev *pci_dev); #endif // CONFIG_PM // -#endif // @@ -128,22 +126,15 @@ static struct pci_driver rt2860_driver = name: "rt2860", id_table: rt2860_pci_tbl, probe: rt2860_init_one, -#if LINUX_VERSION_CODE >= 0x20412 remove: __devexit_p(rt2860_remove_one), -#else - remove: __devexit(rt2860_remove_one), -#endif -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #ifdef CONFIG_PM suspend: rt2860_suspend, resume: rt2860_resume, #endif -#endif }; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #ifdef CONFIG_PM VOID RT2860RejectPendingPackets( @@ -284,16 +275,11 @@ static int rt2860_resume( return 0; } #endif // CONFIG_PM // -#endif static INT __init rt2860_init_module(VOID) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) return pci_register_driver(&rt2860_driver); -#else - return pci_module_init(&rt2860_driver); -#endif } @@ -374,11 +360,7 @@ static VOID __devexit rt2860_remove_one( } // Free pre-allocated net_device memory -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) free_netdev(net_dev); -#else - kfree(net_dev); -#endif } // @@ -758,16 +740,13 @@ static void ac0_dma_done_tasklet(unsigned long data) int print_int_count; IRQ_HANDLE_TYPE -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)) rt2860_interrupt(int irq, void *dev_instance) -#else -rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -#endif { struct net_device *net_dev = (struct net_device *) dev_instance; PRTMP_ADAPTER pAd = net_dev->ml_priv; INT_SOURCE_CSR_STRUC IntSource; POS_COOKIE pObj; + BOOLEAN bOldValue; pObj = (POS_COOKIE) pAd->OS_Cookie; @@ -800,20 +779,19 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs) // RT2661 => when ASIC is sleeping, MAC register cannot be read and written. // RT2860 => when ASIC is sleeping, MAC register can be read and written. + bOldValue = pAd->bPCIclkOff; + pAd->bPCIclkOff = FALSE; { RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IntSource.word); RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); // write 1 to clear } + pAd->bPCIclkOff = bOldValue; // Do nothing if Reset in progress if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - return IRQ_HANDLED; -#else - return; -#endif + return IRQ_HANDLED; } // @@ -822,8 +800,6 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs) // The priority can be adjust by altering processing if statement // - pAd->bPCIclkOff = FALSE; - // If required spinlock, each interrupt service routine has to acquire // and release itself. // @@ -832,11 +808,8 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs) if (IntSource.word == 0xffffffff) { RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - return IRQ_HANDLED; -#else - return; -#endif + printk("snowpin - IntSource.word == 0xffffffff\n"); + return IRQ_HANDLED; } if (IntSource.word & TxCoherent) @@ -970,10 +943,7 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs) } #endif // CONFIG_STA_SUPPORT // -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) return IRQ_HANDLED; -#endif - } /* @@ -1026,11 +996,7 @@ BOOLEAN RT28XXNetDevInit( ULONG csr_addr; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - print_name = pci_dev ? pci_name(pci_dev) : "rt2860"; -#else - print_name = pci_dev ? pci_dev->slot_name : "rt2860"; -#endif // LINUX_VERSION_CODE // + print_name = pci_dev ? pci_name(pci_dev) : "rt2860"; net_dev->base_addr = 0; net_dev->irq = 0; diff --git a/drivers/staging/rt2860/Makefile b/drivers/staging/rt2860/Makefile index 6162212b588c..b95636478464 100644 --- a/drivers/staging/rt2860/Makefile +++ b/drivers/staging/rt2860/Makefile @@ -2,7 +2,6 @@ obj-$(CONFIG_RT2860) += rt2860sta.o # TODO: all of these should be removed EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT -EXTRA_CFLAGS += -DRT2860 EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT EXTRA_CFLAGS += -DDBG EXTRA_CFLAGS += -DDOT11_N_SUPPORT diff --git a/drivers/staging/rt2860/TODO b/drivers/staging/rt2860/TODO index 2f70b0faca3d..6158dc2a4b66 100644 --- a/drivers/staging/rt2860/TODO +++ b/drivers/staging/rt2860/TODO @@ -1,6 +1,6 @@ I'm hesitant to add a TODO file here, as the wireless developers would really have people help them out on the "clean" rt2860 driver that can -be found at the rt2860.sf.net site. +be found at the http://rt2x00.serialmonkey.com/ site. But, if you wish to clean up this driver instead, here's a short list of things that need to be done to get it into a more mergable shape: @@ -8,7 +8,7 @@ things that need to be done to get it into a more mergable shape: TODO: - checkpatch.pl clean - sparse clean - - port to in-kernel 80211 stack + - port to in-kernel 80211 stack and common rt2x00 infrastructure - remove reading from /etc/ config files - review by the wireless developer community diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c index b67b9eba7229..b3f88f52af7c 100644 --- a/drivers/staging/rt2860/common/cmm_data.c +++ b/drivers/staging/rt2860/common/cmm_data.c @@ -105,9 +105,7 @@ NDIS_STATUS MiniportMMRequest( PNDIS_PACKET pPacket; NDIS_STATUS Status = NDIS_STATUS_SUCCESS; ULONG FreeNum; -#ifdef RT2860 unsigned long IrqFlags = 0; -#endif // RT2860 // UCHAR IrqState; UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN]; @@ -118,10 +116,9 @@ NDIS_STATUS MiniportMMRequest( // 2860C use Tx Ring IrqState = pAd->irq_disabled; -#ifdef RT2860 + if ((pAd->MACVersion == 0x28600100) && (!IrqState)) RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags); -#endif // RT2860 // do { @@ -175,17 +172,14 @@ NDIS_STATUS MiniportMMRequest( } while (FALSE); -#ifdef RT2860 // 2860C use Tx Ring if ((pAd->MACVersion == 0x28600100) && (!IrqState)) RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); -#endif // RT2860 // return Status; } -#ifdef RT2860 NDIS_STATUS MiniportMMRequestUnlock( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -253,7 +247,6 @@ NDIS_STATUS MiniportMMRequestUnlock( return Status; } -#endif // RT2860 // /* @@ -290,17 +283,14 @@ NDIS_STATUS MlmeHardTransmit( return NDIS_STATUS_FAILURE; } -#ifdef RT2860 if ( pAd->MACVersion == 0x28600100 ) return MlmeHardTransmitTxRing(pAd,QueIdx,pPacket); else -#endif // RT2860 // return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket); } -#ifdef RT2860 NDIS_STATUS MlmeHardTransmitTxRing( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -366,7 +356,7 @@ NDIS_STATUS MlmeHardTransmitTxRing( { // outgoing frame always wakeup PHY to prevent frame lost if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); } #endif // CONFIG_STA_SUPPORT // pFirstTxWI =(PTXWI_STRUC)pSrcBufVA; @@ -509,7 +499,6 @@ NDIS_STATUS MlmeHardTransmitTxRing( return NDIS_STATUS_SUCCESS; } -#endif // RT2860 // NDIS_STATUS MlmeHardTransmitMgmtRing( @@ -541,7 +530,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing( { // outgoing frame always wakeup PHY to prevent frame lost if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); } #endif // CONFIG_STA_SUPPORT // @@ -1076,7 +1065,6 @@ VOID RTMPDeQueuePacket( break; } -#ifdef RT2860 FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx); #ifdef DBG_DIAGNOSE @@ -1101,7 +1089,6 @@ VOID RTMPDeQueuePacket( RTMPFreeTXDUponTxDmaDone(pAd, QueIdx); FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx); } -#endif // RT2860 // // probe the Queue Head pQueue = &pAd->TxSwQueue[QueIdx]; @@ -1180,12 +1167,10 @@ VOID RTMPDeQueuePacket( Status = STAHardTransmit(pAd, pTxBlk, QueIdx); #endif // CONFIG_STA_SUPPORT // -#ifdef RT2860 DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags); // static rate also need NICUpdateFifoStaCounters() function. //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) NICUpdateFifoStaCounters(pAd); -#endif // RT2860 // } RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags); @@ -1764,7 +1749,6 @@ PQUEUE_HEADER RTMPCheckTxSwQueue( } -#ifdef RT2860 BOOLEAN RTMPFreeTXDUponTxDmaDone( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx) @@ -2309,7 +2293,6 @@ VOID DBGPRINT_RX_RING( DBGPRINT_RAW(RT_DEBUG_TRACE,(" RxSwReadIdx [%d]=", AC0freeIdx)); DBGPRINT_RAW(RT_DEBUG_TRACE,(" pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount)); } -#endif // RT2860 // /* ======================================================================== @@ -2634,9 +2617,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( pEntry->AuthMode = pAd->StaCfg.AuthMode; pEntry->WepStatus = pAd->StaCfg.WepStatus; pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll; -#ifdef RT2860 AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i); -#endif // RT2860 // } #endif // CONFIG_STA_SUPPORT // } @@ -2823,9 +2804,7 @@ VOID MacTableReset( for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++) { -#ifdef RT2860 RT28XX_STA_ENTRY_MAC_RESET(pAd, i); -#endif // RT2860 // if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) { diff --git a/drivers/staging/rt2860/common/cmm_data_2860.c b/drivers/staging/rt2860/common/cmm_data_2860.c index 419e50c3fc4c..fae741e4beeb 100644 --- a/drivers/staging/rt2860/common/cmm_data_2860.c +++ b/drivers/staging/rt2860/common/cmm_data_2860.c @@ -634,7 +634,7 @@ VOID RT28xxPciAsicRadioOff( } // Once go into this function, disable tx because don't want too many packets in queue to prevent HW stops. - pAd->bPCIclkOffDisableTx = TRUE; + RTMP_SET_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { @@ -651,7 +651,7 @@ VOID RT28xxPciAsicRadioOff( { DBGPRINT(RT_DEBUG_TRACE, ("TbTTTime = 0x%x , give up this sleep. \n", TbTTTime)); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - pAd->bPCIclkOffDisableTx = FALSE; + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); return; } else @@ -688,18 +688,25 @@ VOID RT28xxPciAsicRadioOff( if (i >= 50) { DBGPRINT(RT_DEBUG_TRACE, ("DMA keeps busy. return on RT28xxPciAsicRadioOff ()\n")); - pAd->bPCIclkOffDisableTx = FALSE; RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); DmaCfg.field.EnableTxDMA = 1; RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); + pAd->CheckDmaBusyCount++; return; } + else + { + pAd->CheckDmaBusyCount = 0; + } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF); // Set to 1R. - tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3); + if (pAd->Antenna.field.RxPath > 1) + { + tempBBP_R3 = (pAd->StaCfg.BBPR3 & 0xE7); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, tempBBP_R3); + } // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) @@ -714,8 +721,15 @@ VOID RT28xxPciAsicRadioOff( AsicTurnOffRFClk(pAd, pAd->CommonCfg.Channel); } - // When PCI clock is off, don't want to service interrupt. - RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); + if (Level != RTMP_HALT) + { + // Change Interrupt bitmask. + RTMP_IO_WRITE32(pAd, INT_MASK_CSR, AutoWakeupInt); + } + else + { + NICDisableInterrupt(pAd); + } RTMP_IO_WRITE32(pAd, RX_CRX_IDX, pAd->RxRing.RxCpuIdx); // Disable MAC Rx @@ -726,7 +740,8 @@ VOID RT28xxPciAsicRadioOff( // 2. Send Sleep command RTMP_IO_WRITE32(pAd, H2M_MAILBOX_STATUS, 0xffffffff); RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CID, 0xffffffff); - AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout unit:40us. + // send POWER-SAVE command to MCU. high-byte = 1 save power as much as possible. high byte = 0 save less power + AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x1); // 2-1. Wait command success // Status = 1 : success, Status = 2, already sleep, Status = 3, Maybe MAC is busy so can't finish this task. brc = AsicCheckCommanOk(pAd, PowerSafeCID); @@ -734,7 +749,7 @@ VOID RT28xxPciAsicRadioOff( if (brc == FALSE) { // try again - AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x00); // send POWER-SAVE command to MCU. Timeout unit:40us. + AsicSendCommandToMcu(pAd, 0x30, PowerSafeCID, 0xff, 0x01); // send POWER-SAVE command to MCU. Timeout unit:40us. //RTMPusecDelay(200); brc = AsicCheckCommanOk(pAd, PowerSafeCID); } @@ -759,7 +774,7 @@ VOID RT28xxPciAsicRadioOff( do { RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - if (DmaCfg.field.RxDMABusy == 0) + if ((DmaCfg.field.RxDMABusy == 0) && (DmaCfg.field.TxDMABusy == 0)) break; RTMPusecDelay(20); i++; @@ -767,13 +782,12 @@ VOID RT28xxPciAsicRadioOff( if (i >= 50) { + pAd->CheckDmaBusyCount++; DBGPRINT(RT_DEBUG_TRACE, ("DMA Rx keeps busy. on RT28xxPciAsicRadioOff ()\n")); } - // disable DMA Rx. + else { - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &DmaCfg.word); - DmaCfg.field.EnableRxDMA = 0; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, DmaCfg.word); + pAd->CheckDmaBusyCount = 0; } if (Level == DOT11POWERSAVE) @@ -799,7 +813,7 @@ VOID RT28xxPciAsicRadioOff( if (Level == RTMP_HALT) { if ((brc == TRUE) && (i < 50)) - RTMPPCIeLinkCtrlSetting(pAd, 1); + RTMPPCIeLinkCtrlSetting(pAd, 0); } // 4. Set PCI configuration Space Link Comtrol fields. Only Radio Off needs to call this function else @@ -808,7 +822,7 @@ VOID RT28xxPciAsicRadioOff( RTMPPCIeLinkCtrlSetting(pAd, 3); } - pAd->bPCIclkOffDisableTx = FALSE; + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_DISABLE_TX); } @@ -835,7 +849,8 @@ BOOLEAN RT28xxPciAsicRadioOn( { pAd->Mlme.bPsPollTimerRunning = FALSE; RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); - if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE)) + if ((Level == GUIRADIO_OFF) || (Level == GUI_IDLE_POWER_SAVE) + || (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))) { DBGPRINT(RT_DEBUG_TRACE, ("RT28xxPciAsicRadioOn ()\n")); // 1. Set PCI Link Control in Configuration Space. @@ -845,15 +860,14 @@ BOOLEAN RT28xxPciAsicRadioOn( } pAd->bPCIclkOff = FALSE; - + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x3a80); // 2. Send wake up command. - AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00); + AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x02); // 2-1. wait command ok. brv = AsicCheckCommanOk(pAd, PowerWakeCID); if (brv) { - //RTMP_IO_WRITE32(pAd, INT_MASK_CSR, (DELAYINTMASK|RxINT)); NICEnableInterrupt(pAd); // 3. Enable Tx DMA. @@ -893,13 +907,10 @@ BOOLEAN RT28xxPciAsicRadioOn( VOID RT28xxPciStaAsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx) + IN UCHAR Level) { AUTO_WAKEUP_STRUC AutoWakeupCfg; - if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - return; - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WAKEUP_NOW)) { DBGPRINT(RT_DEBUG_TRACE, ("waking up now!\n")); @@ -907,38 +918,48 @@ VOID RT28xxPciStaAsicForceWakeup( } OPSTATUS_SET_FLAG(pAd, fOP_STATUS_WAKEUP_NOW); + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { // Support PCIe Advance Power Save - if (bFromTx == TRUE) + if (((Level == FROM_TX) && (pAd->Mlme.bPsPollTimerRunning == TRUE)) || + (Level == RTMP_HALT)) { pAd->Mlme.bPsPollTimerRunning = FALSE; RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_WAKEUP); - RTMPusecDelay(3000); + RTMPusecDelay(5000); DBGPRINT(RT_DEBUG_TRACE, ("=======AsicForceWakeup===bFromTx\n")); } AutoWakeupCfg.word = 0; RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) - { - // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. - if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) - && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) - { - // Must using 40MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - } - else - { - // Must using 20MHz. - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - } - } + // If this is called from Halt. ALWAYS force wakeup!!! + if (Level == RTMP_HALT) + { + RT28xxPciAsicRadioOn(pAd, RTMP_HALT); + } + else + { + if (RT28xxPciAsicRadioOn(pAd, DOT11POWERSAVE)) + { + // In Radio Off, we turn off RF clk, So now need to call ASICSwitchChannel again. + if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != pAd->CommonCfg.Channel) + && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + } + else + { + // Must using 20MHz. + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + } + } + } } else { @@ -1122,6 +1143,7 @@ VOID RT28xxPciMlmeRadioOn( { NICResetFromError(pAd); + /* RTMPRingCleanUp(pAd, QID_AC_BK); RTMPRingCleanUp(pAd, QID_AC_BE); RTMPRingCleanUp(pAd, QID_AC_VI); @@ -1129,6 +1151,7 @@ VOID RT28xxPciMlmeRadioOn( RTMPRingCleanUp(pAd, QID_HCCA); RTMPRingCleanUp(pAd, QID_MGMT); RTMPRingCleanUp(pAd, QID_RX); + */ // Enable Tx/Rx RTMPEnableRxTx(pAd); @@ -1162,6 +1185,12 @@ VOID RT28xxPciMlmeRadioOFF( WPDMA_GLO_CFG_STRUC GloCfg; UINT32 i; + if (pAd->StaCfg.bRadio == TRUE) + { + DBGPRINT(RT_DEBUG_TRACE,("-->MlmeRadioOff() return on bRadio == TRUE; \n")); + return; + } + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF)) return; @@ -1169,13 +1198,12 @@ VOID RT28xxPciMlmeRadioOFF( // Set LED RTMPSetLED(pAd, LED_RADIO_OFF); - // Set Radio off flag - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { BOOLEAN Cancelled; + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) { RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); @@ -1185,6 +1213,15 @@ VOID RT28xxPciMlmeRadioOFF( if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { BOOLEAN Cancelled; + + // Always radio on since the NIC needs to set the MCU command (LED_RADIO_OFF).
+ if ((pAd->OpMode == OPMODE_STA) &&
+ (IDLE_ON(pAd)) &&
+ (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
+ {
+ RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
+ } + pAd->Mlme.bPsPollTimerRunning = FALSE; RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); @@ -1197,9 +1234,26 @@ VOID RT28xxPciMlmeRadioOFF( //========================================== // Clean up old bss table BssTableInit(&pAd->ScanTab); + + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) + { + RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 500); + return; + } } #endif // CONFIG_STA_SUPPORT // + // Set Radio off flag + RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); + // Disable Tx/Rx DMA RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); // disable DMA GloCfg.field.EnableTxDMA = 0; diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index dd92ac6eaed2..c3e13195e121 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -814,7 +814,6 @@ INT Show_DescInfo_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { -#ifdef RT2860 INT i, QueIdx=0; PRT28XX_RXD_STRUC pRxD; PTXD_STRUC pTxD; @@ -845,7 +844,6 @@ INT Show_DescInfo_Proc( hex_dump("Rx Descriptor", (char *)pRxD, 16); printk("pRxD->DDONE = %x\n", pRxD->DDONE); } -#endif // RT2860 // return TRUE; } @@ -1803,9 +1801,7 @@ VOID RTMPAddWcidAttributeEntry( } // For key index and ext IV bit, so only need to update the position(offset+3). -#ifdef RT2860 RTMP_IO_WRITE8(pAd, offset+3, IVEIV); -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg])); DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri)); @@ -2827,9 +2823,7 @@ INT Set_OpMode_Proc( Value = simple_strtol(arg, 0, 10); -#ifdef RT2860 if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) -#endif // RT2860 // { DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n")); return FALSE; diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c index 40e4109118e0..d29e0b630e2e 100644 --- a/drivers/staging/rt2860/common/cmm_sync.c +++ b/drivers/staging/rt2860/common/cmm_sync.c @@ -470,7 +470,7 @@ VOID ScanNextChannel( { // BBP and RF are not accessible in PS mode, we has to wake them up first if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); // leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON if (pAd->StaCfg.Psm == PWR_SAVE) diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c index 81c332ac2524..69baf522fa01 100644 --- a/drivers/staging/rt2860/common/cmm_wpa.c +++ b/drivers/staging/rt2860/common/cmm_wpa.c @@ -39,8 +39,10 @@ // WPA OUI UCHAR OUI_WPA_NONE_AKM[4] = {0x00, 0x50, 0xF2, 0x00}; UCHAR OUI_WPA_VERSION[4] = {0x00, 0x50, 0xF2, 0x01}; +UCHAR OUI_WPA_WEP40[4] = {0x00, 0x50, 0xF2, 0x01}; UCHAR OUI_WPA_TKIP[4] = {0x00, 0x50, 0xF2, 0x02}; UCHAR OUI_WPA_CCMP[4] = {0x00, 0x50, 0xF2, 0x04}; +UCHAR OUI_WPA_WEP104[4] = {0x00, 0x50, 0xF2, 0x05}; UCHAR OUI_WPA_8021X_AKM[4] = {0x00, 0x50, 0xF2, 0x01}; UCHAR OUI_WPA_PSK_AKM[4] = {0x00, 0x50, 0xF2, 0x02}; // WPA2 OUI @@ -49,6 +51,7 @@ UCHAR OUI_WPA2_TKIP[4] = {0x00, 0x0F, 0xAC, 0x02}; UCHAR OUI_WPA2_CCMP[4] = {0x00, 0x0F, 0xAC, 0x04}; UCHAR OUI_WPA2_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x01}; UCHAR OUI_WPA2_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x02}; +UCHAR OUI_WPA2_WEP104[4] = {0x00, 0x0F, 0xAC, 0x05}; // MSA OUI UCHAR OUI_MSA_8021X_AKM[4] = {0x00, 0x0F, 0xAC, 0x05}; // Not yet final - IEEE 802.11s-D1.06 UCHAR OUI_MSA_PSK_AKM[4] = {0x00, 0x0F, 0xAC, 0x06}; // Not yet final - IEEE 802.11s-D1.06 @@ -367,6 +370,24 @@ static VOID RTMPInsertRsnIeCipher( break; } +#ifdef CONFIG_STA_SUPPORT + if ((pAd->OpMode == OPMODE_STA) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled)) + { + UINT GroupCipher = pAd->StaCfg.GroupCipher; + switch(GroupCipher) + { + case Ndis802_11GroupWEP40Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP40, 4); + break; + case Ndis802_11GroupWEP104Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA2_WEP104, 4); + break; + } + } +#endif // CONFIG_STA_SUPPORT // + // swap for big-endian platform pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version); pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount); @@ -427,11 +448,28 @@ static VOID RTMPInsertRsnIeCipher( break; } +#ifdef CONFIG_STA_SUPPORT + if ((pAd->OpMode == OPMODE_STA) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) && + (pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled)) + { + UINT GroupCipher = pAd->StaCfg.GroupCipher; + switch(GroupCipher) + { + case Ndis802_11GroupWEP40Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP40, 4); + break; + case Ndis802_11GroupWEP104Enabled: + NdisMoveMemory(pRsnie_cipher->mcast, OUI_WPA_WEP104, 4); + break; + } + } +#endif // CONFIG_STA_SUPPORT // + // swap for big-endian platform pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version); pRsnie_cipher->ucount = cpu2le16(pRsnie_cipher->ucount); } - } /* diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 229747095aec..c00f9ab9c46c 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -527,7 +527,6 @@ NDIS_STATUS MlmeInit( #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) @@ -537,7 +536,6 @@ NDIS_STATUS MlmeInit( RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE); } } -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // } while (FALSE); @@ -711,13 +709,11 @@ VOID MlmeHalt( RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); } -#endif // RT2860 // #ifdef QOS_DLS_SUPPORT for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) @@ -808,21 +804,34 @@ VOID MlmePeriodicExec( ULONG TxTotalCnt; PRTMP_ADAPTER pAd = (RTMP_ADAPTER *)FunctionContext; + //Baron 2008/07/10 + //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); + //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. + //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1. + if(pAd->StaCfg.WepStatus<2) + { + pAd->StaCfg.WpaSupplicantUP = 0; + } + else + { + pAd->StaCfg.WpaSupplicantUP = 1; + } + #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. // Move code to here, because following code will return when radio is off - if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && (pAd->StaCfg.bHardwareRadio == TRUE) && + if ((pAd->Mlme.PeriodicRound % (MLME_TASK_EXEC_MULTIPLE * 2) == 0) && + (pAd->StaCfg.bHardwareRadio == TRUE) && + (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) && - (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && - (pAd->bPCIclkOff == FALSE)) + (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS))) { UINT32 data = 0; // Read GPIO pin2 as Hardware controlled radio state - RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data); + RTMP_IO_FORCE_READ32(pAd, GPIO_CTRL_CFG, &data); if (data & 0x04) { pAd->StaCfg.bHwRadio = TRUE; @@ -849,7 +858,6 @@ VOID MlmePeriodicExec( } } } -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // // Do nothing if the driver is starting halt state. @@ -860,6 +868,45 @@ VOID MlmePeriodicExec( fRTMP_ADAPTER_RESET_IN_PROGRESS)))) return; + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) + { + if ((pAd->RalinkCounters.LastReceivedByteCount == pAd->RalinkCounters.ReceivedByteCount) && (pAd->StaCfg.bRadio == TRUE)) + { + // If ReceiveByteCount doesn't change, increase SameRxByteCount by 1. + pAd->SameRxByteCount++; + } + else + pAd->SameRxByteCount = 0; + + // If after BBP, still not work...need to check to reset PBF&MAC. + if (pAd->SameRxByteCount == 702) + { + pAd->SameRxByteCount = 0; + AsicResetPBF(pAd); + AsicResetMAC(pAd); + } + + // If SameRxByteCount keeps happens for 2 second in infra mode, or for 60 seconds in idle mode. + if (((INFRA_ON(pAd)) && (pAd->SameRxByteCount > 20)) || ((IDLE_ON(pAd)) && (pAd->SameRxByteCount > 600))) + { + if ((pAd->StaCfg.bRadio == TRUE) && (pAd->SameRxByteCount < 700)) + { + DBGPRINT(RT_DEBUG_TRACE, ("---> SameRxByteCount = %lu !!!!!!!!!!!!!!! \n", pAd->SameRxByteCount)); + pAd->SameRxByteCount = 700; + AsicResetBBP(pAd); + } + } + + // Update lastReceiveByteCount. + pAd->RalinkCounters.LastReceivedByteCount = pAd->RalinkCounters.ReceivedByteCount; + + if ((pAd->CheckDmaBusyCount > 3) && (IDLE_ON(pAd))) + { + pAd->CheckDmaBusyCount = 0; + AsicResetFromDMABusy(pAd); + } + } + RT28XX_MLME_PRE_SANITY_CHECK(pAd); #ifdef RALINK_ATE @@ -1022,9 +1069,7 @@ VOID MlmePeriodicExec( #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef RT2860 if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE)) -#endif // RT2860 // { // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock // and sending CTS-to-self over and over. @@ -1081,6 +1126,19 @@ VOID STAMlmePeriodicExec( pAd->StaCfg.bBlockAssoc = FALSE; } + //Baron 2008/07/10 + //printk("Baron_Test:\t%s", RTMPGetRalinkEncryModeStr(pAd->StaCfg.WepStatus)); + //If the STA security setting is OPEN or WEP, pAd->StaCfg.WpaSupplicantUP = 0. + //If the STA security setting is WPAPSK or WPA2PSK, pAd->StaCfg.WpaSupplicantUP = 1. + if(pAd->StaCfg.WepStatus<2) + { + pAd->StaCfg.WpaSupplicantUP = 0; + } + else + { + pAd->StaCfg.WpaSupplicantUP = 1; + } + if ((pAd->PreMediaState != pAd->IndicateMediaState) && (pAd->CommonCfg.bWirelessEvent)) { if (pAd->IndicateMediaState == NdisMediaStateConnected) @@ -1090,6 +1148,15 @@ VOID STAMlmePeriodicExec( pAd->PreMediaState = pAd->IndicateMediaState; } + if ((pAd->OpMode == OPMODE_STA) && (IDLE_ON(pAd)) && + (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && + (pAd->Mlme.SyncMachine.CurrState == SYNC_IDLE) && + (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE) && + (RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP)) && + (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))) + { + RT28xxPciAsicRadioOff(pAd, GUI_IDLE_POWER_SAVE, 0); + } @@ -2781,7 +2848,7 @@ VOID MlmeCheckPsmChange( if (INFRA_ON(pAd) && (PowerMode != Ndis802_11PowerModeCAM) && (pAd->StaCfg.Psm == PWR_ACTIVE) && - (pAd->Mlme.CntlMachine.CurrState == CNTL_IDLE)) + RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)) { NdisGetSystemUpTime(&pAd->Mlme.LastSendNULLpsmTime); pAd->RalinkCounters.RxCountSinceLastNULL = 0; @@ -4065,7 +4132,9 @@ VOID BssTableSsidSort( continue; // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) + if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && + (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) && + (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled)) continue; // check pairwise cipher, skip if none matched @@ -4084,7 +4153,9 @@ VOID BssTableSsidSort( continue; // check group cipher - if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher) + if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) && + (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) && + (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled)) continue; // check pairwise cipher, skip if none matched @@ -4371,8 +4442,10 @@ VOID BssCipherParse( switch (*pTmp) { case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WPA.GroupCipher = Ndis802_11Encryption1Enabled; + pBss->WPA.GroupCipher = Ndis802_11GroupWEP40Enabled; + break; + case 5: + pBss->WPA.GroupCipher = Ndis802_11GroupWEP104Enabled; break; case 2: pBss->WPA.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4489,8 +4562,10 @@ VOID BssCipherParse( switch (pCipher->Type) { case 1: - case 5: // Although WEP is not allowed in WPA related auth mode, we parse it anyway - pBss->WPA2.GroupCipher = Ndis802_11Encryption1Enabled; + pBss->WPA2.GroupCipher = Ndis802_11GroupWEP40Enabled; + break; + case 5: + pBss->WPA2.GroupCipher = Ndis802_11GroupWEP104Enabled; break; case 2: pBss->WPA2.GroupCipher = Ndis802_11Encryption2Enabled; @@ -4953,16 +5028,13 @@ BOOLEAN MlmeDequeue( VOID MlmeRestartStateMachine( IN PRTMP_ADAPTER pAd) { -#ifdef RT2860 MLME_QUEUE_ELEM *Elem = NULL; -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT BOOLEAN Cancelled; #endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n")); -#ifdef RT2860 NdisAcquireSpinLock(&pAd->Mlme.TaskLock); if(pAd->Mlme.bRunning) { @@ -4990,7 +5062,6 @@ VOID MlmeRestartStateMachine( DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n")); } } -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) @@ -5039,12 +5110,10 @@ VOID MlmeRestartStateMachine( } #endif // CONFIG_STA_SUPPORT // -#ifdef RT2860 // Remove running state NdisAcquireSpinLock(&pAd->Mlme.TaskLock); pAd->Mlme.bRunning = FALSE; NdisReleaseSpinLock(&pAd->Mlme.TaskLock); -#endif // RT2860 // } /*! \brief test if the MLME Queue is empty @@ -6149,6 +6218,12 @@ VOID AsicAdjustTxPower( ULONG TxPwr[5]; CHAR Value; + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) + || (pAd->bPCIclkOff == TRUE) + || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF) + || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) + return; + if (pAd->CommonCfg.BBPCurrentBW == BW_40) { if (pAd->CommonCfg.CentralChannel > 14) @@ -6493,10 +6568,10 @@ VOID AsicForceSleep( */ VOID AsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx) + IN UCHAR Level) { DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n")); - RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx); + RT28XX_STA_FORCE_WAKEUP(pAd, Level); } #endif // CONFIG_STA_SUPPORT // /* @@ -6710,7 +6785,6 @@ VOID AsicEnableIbssSync( csr9.field.bTsfTicking = 0; RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word); -#ifdef RT2860 // move BEACON TXD and frame content to on-chip memory ptr = (PUCHAR)&pAd->BeaconTxWI; for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field @@ -6728,7 +6802,6 @@ VOID AsicEnableIbssSync( RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); ptr +=4; } -#endif // RT2860 // // start sending BEACON csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU @@ -7097,9 +7170,7 @@ VOID AsicAddSharedKeyEntry( { ULONG offset; //, csr0; SHAREDKEY_MODE_STRUC csr1; -#ifdef RT2860 INT i; -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx)); //============================================================================================ @@ -7121,7 +7192,6 @@ VOID AsicAddSharedKeyEntry( // // fill key material - key + TX MIC + RX MIC // -#ifdef RT2860 offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE; for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++) { @@ -7145,7 +7215,6 @@ VOID AsicAddSharedKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } } -#endif // RT2860 // // @@ -7320,9 +7389,7 @@ VOID AsicAddKeyEntry( PUCHAR pTxtsc = pCipherKey->TxTsc; UCHAR CipherAlg = pCipherKey->CipherAlg; SHAREDKEY_MODE_STRUC csr1; -#ifdef RT2860 UCHAR i; -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n")); // @@ -7337,7 +7404,6 @@ VOID AsicAddKeyEntry( // 2.) Set Key to Asic // //for (i = 0; i < KeyLen; i++) -#ifdef RT2860 for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); @@ -7363,7 +7429,6 @@ VOID AsicAddKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } } -#endif // RT2860 // // @@ -7372,7 +7437,6 @@ VOID AsicAddKeyEntry( // if (bTxKey) { -#ifdef RT2860 offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE); // // Write IV @@ -7395,7 +7459,6 @@ VOID AsicAddKeyEntry( { RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]); } -#endif // RT2860 // AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable); } @@ -7461,12 +7524,10 @@ VOID AsicAddPairwiseKeyEntry( // EKEY offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE); -#ifdef RT2860 for (i=0; i<MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); } -#endif // RT2860 // for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4) { UINT32 Value; @@ -7478,22 +7539,18 @@ VOID AsicAddPairwiseKeyEntry( // MIC KEY if (pTxMic) { -#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]); } -#endif // RT2860 // } offset += 8; if (pRxMic) { -#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]); } -#endif // RT2860 // } DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg])); @@ -7542,11 +7599,9 @@ BOOLEAN AsicSendCommandToMcu( HOST_CMD_CSR_STRUC H2MCmd; H2M_MAILBOX_STRUC H2MMailbox; ULONG i = 0; -#ifdef RT2860 #ifdef RALINK_ATE static UINT32 j = 0; #endif // RALINK_ATE // -#endif // RT2860 // do { RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word); @@ -7558,7 +7613,6 @@ BOOLEAN AsicSendCommandToMcu( if (i >= 100) { -#ifdef RT2860 #ifdef RALINK_ATE if (pAd->ate.bFWLoading == TRUE) { @@ -7583,14 +7637,33 @@ BOOLEAN AsicSendCommandToMcu( } else #endif // RALINK_ATE // -#endif // RT2860 // { + UINT32 Data; + + // Reset DMA + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x2; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too. + // Reset DMA/CPU ring index + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + // Clear Reset + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data &= 0xfffffffd; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); DBGPRINT_ERR(("H2M_MAILBOX still hold by MCU. command fail\n")); } - return FALSE; + //return FALSE; } -#ifdef RT2860 #ifdef RALINK_ATE else if (pAd->ate.bFWLoading == TRUE) { @@ -7600,7 +7673,6 @@ BOOLEAN AsicSendCommandToMcu( j = 0; } #endif // RALINK_ATE // -#endif // RT2860 // H2MMailbox.field.Owner = 1; // pass ownership to MCU H2MMailbox.field.CmdToken = Token; @@ -7619,7 +7691,6 @@ BOOLEAN AsicSendCommandToMcu( return TRUE; } -#ifdef RT2860 BOOLEAN AsicCheckCommanOk( IN PRTMP_ADAPTER pAd, IN UCHAR Command) @@ -7684,7 +7755,6 @@ BOOLEAN AsicCheckCommanOk( return FALSE; } -#endif // RT2860 // /* ======================================================================== @@ -8096,10 +8166,8 @@ VOID AsicEvaluateRxAnt( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) pAd->StaCfg.BBPR3 = BBPR3; -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) @@ -8211,9 +8279,7 @@ VOID AsicRxAntEvalTimeout( BBPR3 |= (0x0); } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef RT2860 - pAd->StaCfg.BBPR3 = BBPR3; -#endif // RT2860 // + pAd->StaCfg.BBPR3 = BBPR3; } #endif // CONFIG_STA_SUPPORT // @@ -8439,10 +8505,7 @@ VOID AsicStaBbpTuning( && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) && !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) -#ifdef RT2860 - && (pAd->bPCIclkOff == FALSE) -#endif // RT2860 // - ) + && (pAd->bPCIclkOff == FALSE)) { RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value); R66 = OrigR66Value; @@ -8518,6 +8581,106 @@ VOID AsicStaBbpTuning( } } + +VOID AsicResetFromDMABusy( + IN PRTMP_ADAPTER pAd) +{ + UINT32 Data; + BOOLEAN bCtrl = FALSE; + + DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n")); + + // Be sure restore link control value so we can write register. + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + DBGPRINT(RT_DEBUG_TRACE,("AsicResetFromDMABusy==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + bCtrl = TRUE; + } + // Reset DMA + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x2; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // After Reset DMA, DMA index will become Zero. So Driver need to reset all ring indexs too. + // Reset DMA/CPU ring index + RTMPRingCleanUp(pAd, QID_AC_BK); + RTMPRingCleanUp(pAd, QID_AC_BE); + RTMPRingCleanUp(pAd, QID_AC_VI); + RTMPRingCleanUp(pAd, QID_AC_VO); + RTMPRingCleanUp(pAd, QID_HCCA); + RTMPRingCleanUp(pAd, QID_MGMT); + RTMPRingCleanUp(pAd, QID_RX); + + // Clear Reset + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data &= 0xfffffffd; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + // If in Radio off, should call RTMPPCIePowerLinkCtrl again. + if ((bCtrl == TRUE) && (pAd->StaCfg.bRadio == FALSE)) + RTMPPCIeLinkCtrlSetting(pAd, 3); + + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_HALT_IN_PROGRESS); + DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetFromDMABusy !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + +VOID AsicResetBBP( + IN PRTMP_ADAPTER pAd) +{ + DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n")); + + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x2); + RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc); + + // After hard-reset BBP, initialize all BBP values. + NICRestoreBBPValue(pAd); + DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset BBP !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + +VOID AsicResetMAC( + IN PRTMP_ADAPTER pAd) +{ + ULONG Data; + + DBGPRINT(RT_DEBUG_TRACE, ("---> AsicResetMAC !!!! \n")); + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x4; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + Data &= 0xfffffffb; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + DBGPRINT(RT_DEBUG_TRACE, ("<--- AsicResetMAC !!!! \n")); +} + +VOID AsicResetPBF( + IN PRTMP_ADAPTER pAd) +{ + ULONG Value1, Value2; + ULONG Data; + + RTMP_IO_READ32(pAd, TXRXQ_PCNT, &Value1); + RTMP_IO_READ32(pAd, PBF_DBG, &Value2); + + Value2 &= 0xff; + // sum should be equals to 0xff, which is the total buffer size. + if ((Value1 + Value2) < 0xff) + { + DBGPRINT(RT_DEBUG_TRACE, ("---> Asic HardReset PBF !!!! \n")); + RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &Data); + Data |= 0x8; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + Data &= 0xfffffff7; + RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, Data); + + DBGPRINT(RT_DEBUG_TRACE, ("<--- Asic HardReset PBF !!!! \n")); + } +} #endif // CONFIG_STA_SUPPORT // VOID RTMPSetAGCInitValue( diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index 563f2c5bb856..8a00cee3ee91 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -149,9 +149,7 @@ RTMP_REG_PAIR MACRegTable[] = { {GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS {GF40_PROT_CFG, 0x03F44084}, {MM20_PROT_CFG, 0x01744004}, -#ifdef RT2860 {MM40_PROT_CFG, 0x03F54084}, -#endif // RT2860 // {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff. {TX_RTS_CFG, 0x00092b20}, {EXP_ACK_TIME, 0x002400ca}, // default value @@ -188,9 +186,7 @@ RTMP_REG_PAIR STAMACRegTable[] = { #define FIRMWAREIMAGEV1_LENGTH 0x1000 #define FIRMWAREIMAGEV2_LENGTH 0x1000 -#ifdef RT2860 #define FIRMWARE_MINOR_VERSION 2 -#endif // RT2860 // /* @@ -248,9 +244,7 @@ NDIS_STATUS RTMPAllocAdapterBlock( // Init spin locks NdisAllocateSpinLock(&pAd->MgmtRingLock); -#ifdef RT2860 NdisAllocateSpinLock(&pAd->RxRingLock); -#endif // RT2860 // for (index =0 ; index < NUM_OF_TX_RING; index++) { @@ -1555,10 +1549,7 @@ VOID NICInitAsicFromEEPROM( pAd->LedCntl.word = 0x01; pAd->Led1 = 0x5555; pAd->Led2 = 0x2221; - -#ifdef RT2860 pAd->Led3 = 0xA9F8; -#endif // RT2860 // } AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8)); @@ -1594,12 +1585,10 @@ VOID NICInitAsicFromEEPROM( else { RTMPSetLED(pAd, LED_RADIO_ON); -#ifdef RT2860 AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00); // 2-1. wait command ok. AsicCheckCommanOk(pAd, PowerWakeCID); -#endif // RT2860 // } } #endif // CONFIG_STA_SUPPORT // @@ -1677,10 +1666,8 @@ NDIS_STATUS NICInitializeAdapter( { NDIS_STATUS Status = NDIS_STATUS_SUCCESS; WPDMA_GLO_CFG_STRUC GloCfg; -#ifdef RT2860 UINT32 Value; DELAY_INT_CFG_STRUC IntCfg; -#endif // RT2860 // ULONG i =0, j=0; AC_TXOP_CSR0_STRUC csr0; @@ -1719,11 +1706,9 @@ retry: // asic simulation sequence put this ahead before loading firmware. // pbf hardware reset -#ifdef RT2860 RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings. RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f); RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00); -#endif // RT2860 // // Initialze ASIC for TX & Rx operation if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS) @@ -1737,7 +1722,6 @@ retry: } -#ifdef RT2860 // Write AC_BK base address register Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa); RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value); @@ -1810,7 +1794,6 @@ retry: // Write RX_RING_CSR register Value = RX_RING_SIZE; RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value); -#endif // RT2860 // // WMM parameter @@ -1829,7 +1812,6 @@ retry: RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word); -#ifdef RT2860 // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: i = 0; do @@ -1848,7 +1830,6 @@ retry: IntCfg.word = 0; RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word); -#endif // RT2860 // // reset action @@ -1889,7 +1870,6 @@ NDIS_STATUS NICInitializeAsic( DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n")); -#ifdef RT2860 if (bHardReset == TRUE) { RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); @@ -1914,7 +1894,6 @@ NDIS_STATUS NICInitializeAsic( } } #endif // CONFIG_STA_SUPPORT // -#endif // RT2860 // // @@ -2041,6 +2020,131 @@ NDIS_STATUS NICInitializeAsic( return NDIS_STATUS_SUCCESS; } + +VOID NICRestoreBBPValue( + IN PRTMP_ADAPTER pAd) +{ + UCHAR index; + UCHAR Value = 0; + ULONG Data; + + DBGPRINT(RT_DEBUG_TRACE, ("---> NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n")); + // Initialize BBP register to default value (rtmp_init.c) + for (index = 0; index < NUM_BBP_REG_PARMS; index++) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[index].Register, BBPRegTable[index].Value); + } + // copy from (rtmp_init.c) + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12); + } + + // copy from (connect.c LinkUp function) + if (INFRA_ON(pAd)) + { + // Change to AP channel + if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + pAd->CommonCfg.BBPCurrentBW = BW_40; + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + Value |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + // RX : control channel at lower + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value &= (~0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + // Record BBPR3 setting, But don't keep R Antenna # information. + pAd->StaCfg.BBPR3 = Value; + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data &= 0xfffffffe; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Lower LINK UP !!! Control Channel at Below. Central = %d \n", pAd->CommonCfg.CentralChannel )); + } + else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel) && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) + { + // Must using 40MHz. + pAd->CommonCfg.BBPCurrentBW = BW_40; + AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + Value |= 0x10; + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data |= 0x1; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value |= (0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + // Record BBPR3 setting, But don't keep R Antenna # information. + pAd->StaCfg.BBPR3 = Value; + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x16); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!40MHz Upper LINK UP !!! Control Channel at UpperCentral = %d \n", pAd->CommonCfg.CentralChannel )); + } + else + { + pAd->CommonCfg.BBPCurrentBW = BW_20; + AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); + AsicLockChannel(pAd, pAd->CommonCfg.Channel); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value); + Value &= (~0x18); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value); + + RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); + Data &= 0xfffffffe; + RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Data); + + RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); + Value &= (~0x20); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); + // Record BBPR3 setting, But don't keep R Antenna # information. + pAd->StaCfg.BBPR3 = Value; + + if (pAd->MACVersion == 0x28600100) + { + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x08); + RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x11); + DBGPRINT(RT_DEBUG_TRACE, ("!!!rt2860C !!! \n" )); + } + + DBGPRINT(RT_DEBUG_TRACE, ("!!!20MHz LINK UP !!! \n" )); + } + } + + DBGPRINT(RT_DEBUG_TRACE, ("<--- NICRestoreBBPValue !!!!!!!!!!!!!!!!!!!!!!! \n")); +} + /* ======================================================================== @@ -3028,11 +3132,10 @@ VOID UserCfgInit( pAd->CommonCfg.BBPCurrentBW = BW_20; pAd->LedCntl.word = 0; -#ifdef RT2860 pAd->LedIndicatorStregth = 0; pAd->RLnkCtrlOffset = 0; pAd->HostLnkCtrlOffset = 0; -#endif // RT2860 // + pAd->CheckDmaBusyCount = 0; pAd->bAutoTxAgcA = FALSE; // Default is OFF pAd->bAutoTxAgcG = FALSE; // Default is OFF @@ -3292,9 +3395,7 @@ VOID UserCfgInit( pAd->ate.bRxFer = 0; pAd->ate.bQATxStart = FALSE; pAd->ate.bQARxStart = FALSE; -#ifdef RT2860 pAd->ate.bFWLoading = FALSE; -#endif // RT2860 // #ifdef RALINK_28xx_QA //pAd->ate.Repeat = 0; pAd->ate.TxStatus = 0; @@ -3304,11 +3405,9 @@ VOID UserCfgInit( pAd->CommonCfg.bWiFiTest = FALSE; -#ifdef RT2860 - pAd->bPCIclkOff = FALSE; -#endif // RT2860 // - + pAd->bPCIclkOff = FALSE; + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n")); } diff --git a/drivers/staging/rt2860/common/spectrum.c b/drivers/staging/rt2860/common/spectrum.c index 0265a6d1df1a..b3650ec46563 100644 --- a/drivers/staging/rt2860/common/spectrum.c +++ b/drivers/staging/rt2860/common/spectrum.c @@ -1596,7 +1596,7 @@ static VOID PeerMeasureReportAction( if ((pMeasureReportInfo = kmalloc(sizeof(MEASURE_RPI_REPORT), GFP_ATOMIC)) == NULL) { - DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%d).\n", __func__, sizeof(MEASURE_RPI_REPORT))); + DBGPRINT(RT_DEBUG_ERROR, ("%s unable to alloc memory for measure report buffer (size=%zu).\n", __func__, sizeof(MEASURE_RPI_REPORT))); return; } diff --git a/drivers/staging/rt2860/config.mk b/drivers/staging/rt2860/config.mk index f57d7bbffb24..25bd55a7aab3 100644 --- a/drivers/staging/rt2860/config.mk +++ b/drivers/staging/rt2860/config.mk @@ -108,10 +108,6 @@ ifeq ($(HAS_EXT_BUILD_CHANNEL_LIST),y) WFLAGS += -DEXT_BUILD_CHANNEL_LIST endif -ifeq ($(CHIPSET),2860) -WFLAGS +=-DRT2860 -endif - ifeq ($(CHIPSET),2870) WFLAGS +=-DRT2870 endif diff --git a/drivers/staging/rt2860/oid.h b/drivers/staging/rt2860/oid.h index f2f91b607c47..5e6ed9f62f9d 100644 --- a/drivers/staging/rt2860/oid.h +++ b/drivers/staging/rt2860/oid.h @@ -544,6 +544,8 @@ typedef enum _NDIS_802_11_WEP_STATUS Ndis802_11Encryption3KeyAbsent, Ndis802_11Encryption4Enabled, // TKIP or AES mix Ndis802_11Encryption4KeyAbsent, + Ndis802_11GroupWEP40Enabled, + Ndis802_11GroupWEP104Enabled, } NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS, NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS; diff --git a/drivers/staging/rt2860/rt2860.h b/drivers/staging/rt2860/rt2860.h index 017201906628..4fbec906e106 100644 --- a/drivers/staging/rt2860/rt2860.h +++ b/drivers/staging/rt2860/rt2860.h @@ -46,18 +46,10 @@ Status = NDIS_STATUS_SUCCESS; /* function declarations */ -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #define IRQ_HANDLE_TYPE irqreturn_t -#else -#define IRQ_HANDLE_TYPE void -#endif IRQ_HANDLE_TYPE -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)) rt2860_interrupt(int irq, void *dev_instance); -#else -rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs); -#endif /* ----------------- Frimware Related MACRO ----------------- */ #define RT28XX_WRITE_FIRMWARE(_pAd, _pFwImage, _FwLen) \ @@ -237,9 +229,7 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs); #define RTMP_MSI_DISABLE(_pAd) #endif // PCI_MSI_SUPPORT // -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) #define SA_SHIRQ IRQF_SHARED -#endif #define RT28XX_IRQ_REQUEST(net_dev) \ { PRTMP_ADAPTER _pAd = (PRTMP_ADAPTER)((net_dev)->ml_priv); \ @@ -251,20 +241,12 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs); printk("RT2860: request_irq ERROR(%d)\n", retval); \ return retval; } } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #define RT28XX_IRQ_RELEASE(net_dev) \ { PRTMP_ADAPTER _pAd = (PRTMP_ADAPTER)((net_dev)->ml_priv); \ POS_COOKIE _pObj = (POS_COOKIE)(_pAd->OS_Cookie); \ synchronize_irq(_pObj->pci_dev->irq); \ free_irq(_pObj->pci_dev->irq, (net_dev)); \ RTMP_MSI_DISABLE(_pAd); } -#else -#define RT28XX_IRQ_RELEASE(net_dev) \ -{ PRTMP_ADAPTER _pAd = (PRTMP_ADAPTER)((net_dev)->priv); \ - POS_COOKIE _pObj = (POS_COOKIE)(_pAd->OS_Cookie); \ - free_irq(_pObj->pci_dev->irq, (net_dev)); \ - RTMP_MSI_DISABLE(_pAd); } -#endif #define RT28XX_IRQ_INIT(pAd) \ { pAd->int_enable_reg = ((DELAYINTMASK) | \ @@ -333,8 +315,8 @@ rt2860_interrupt(int irq, void *dev_instance, struct pt_regs *regs); reg16 = cpu2le16(Configuration); \ pci_write_config_word(pci_dev, offset, reg16); \ -#define RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx) \ - RT28xxPciStaAsicForceWakeup(pAd, bFromTx); +#define RT28XX_STA_FORCE_WAKEUP(pAd, Level) \ + RT28xxPciStaAsicForceWakeup(pAd, Level); #define RT28XX_STA_SLEEP_THEN_AUTO_WAKEUP(pAd, TbttNumToNextWakeUp) \ RT28xxPciStaAsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); diff --git a/drivers/staging/rt2860/rt28xx.h b/drivers/staging/rt2860/rt28xx.h index ff23043e560e..e5e6f0a8de63 100644 --- a/drivers/staging/rt2860/rt28xx.h +++ b/drivers/staging/rt2860/rt28xx.h @@ -1670,11 +1670,9 @@ typedef struct _HW_WCID_ENTRY { // 8-byte per entry #define E2PROM_CSR 0x0004 #define IO_CNTL_CSR 0x77d0 -#ifdef RT2860 // 8051 firmware image for RT2860 - base address = 0x4000 #define FIRMWARE_IMAGE_BASE 0x2000 #define MAX_FIRMWARE_IMAGE_SIZE 0x2000 // 8kbyte -#endif // RT2860 // // ================================================================ @@ -2029,7 +2027,6 @@ typedef struct PACKED _TXWI_STRUC { // // Rx descriptor format, Rx Ring // -#ifdef RT2860 #ifdef RT_BIG_ENDIAN typedef struct PACKED _RXD_STRUC { // Word 0 @@ -2098,7 +2095,6 @@ typedef struct PACKED _RXD_STRUC { UINT32 Rsv1:13; } RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC; #endif -#endif // RT2860 // // // RXWI wireless information format, in PBF. invisible in driver. // diff --git a/drivers/staging/rt2860/rt_ate.c b/drivers/staging/rt2860/rt_ate.c index f3316ec0b156..1ed73c9e6b60 100644 --- a/drivers/staging/rt2860/rt_ate.c +++ b/drivers/staging/rt2860/rt_ate.c @@ -68,7 +68,6 @@ static int CheckMCSValid( IN UCHAR Mode, IN UCHAR Mcs); -#ifdef RT2860 static VOID ATEWriteTxWI( IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, @@ -87,7 +86,6 @@ static VOID ATEWriteTxWI( IN UCHAR Txopmode, IN BOOLEAN CfAck, IN HTTRANSMIT_SETTING *pTransmit); -#endif // RT2860 // static VOID SetJapanFilter( @@ -95,7 +93,6 @@ static VOID SetJapanFilter( /*=========================end of prototype=========================*/ -#ifdef RT2860 static INT TxDmaBusy( IN PRTMP_ADAPTER pAd) { @@ -153,7 +150,6 @@ static VOID RtmpDmaEnable( return; } -#endif // RT2860 // static VOID BbpSoftReset( @@ -488,7 +484,6 @@ static INT ATETxPwrHandler( TRUE if all parameters are OK, FALSE otherwise ========================================================================== */ -#ifdef RT2860 static INT ATECmdHandler( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) @@ -1297,7 +1292,6 @@ static INT ATECmdHandler( return TRUE; } -#endif // RT2860 // /* */ /* */ /*=======================End of RT2860=======================*/ @@ -2907,7 +2901,6 @@ VOID ATEAsicAdjustTxPower( None ======================================================================== */ -#ifdef RT2860 static VOID ATEWriteTxWI( IN PRTMP_ADAPTER pAd, IN PTXWI_STRUC pOutTxWI, @@ -2972,7 +2965,6 @@ static VOID ATEWriteTxWI( return; } -#endif // RT2860 // /* ======================================================================== @@ -3249,13 +3241,11 @@ VOID RTMPStationStart( IN PRTMP_ADAPTER pAd) { ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n")); -#ifdef RT2860 - pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; +epAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; // // We did not cancel this timer when entering ATE mode. // // RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV); -#endif // RT2860 // ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n")); } #endif // CONFIG_STA_SUPPORT // @@ -3268,7 +3258,6 @@ VOID RTMPStationStart( This routine should only be used in ATE mode. ========================================================================== */ -#ifdef RT2860 static INT ATESetUpFrame( IN PRTMP_ADAPTER pAd, IN UINT32 TxIdx) @@ -3455,7 +3444,6 @@ static INT ATESetUpFrame( /* */ /* */ /*=======================End of RT2860=======================*/ -#endif // RT2860 // VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data) @@ -4578,9 +4566,7 @@ VOID RtmpDoAte( { if (pAdapter->ate.TxCount == 0) { -#ifdef RT2860 pAdapter->ate.TxCount = 0xFFFFFFFF; -#endif // RT2860 // } ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n")); pAdapter->ate.bQATxStart = TRUE; @@ -5375,7 +5361,6 @@ TX_START_ERROR: memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2); value = ntohs(value); -#ifdef RT2860 /* TX_FRAME_COUNT == 0 means tx infinitely */ if (value == 0) { @@ -5387,7 +5372,6 @@ TX_START_ERROR: } else -#endif // RT2860 // { sprintf((PCHAR)str, "%d", value); Set_ATE_TX_COUNT_Proc(pAdapter, str); diff --git a/drivers/staging/rt2860/rt_ate.h b/drivers/staging/rt2860/rt_ate.h index 48aa70d2f010..38f5c4af5462 100644 --- a/drivers/staging/rt2860/rt_ate.h +++ b/drivers/staging/rt2860/rt_ate.h @@ -31,12 +31,10 @@ #ifndef UCOS #define ate_print printk #define ATEDBGPRINT DBGPRINT -#ifdef RT2860 #define EEPROM_SIZE 0x200 #ifdef CONFIG_STA_SUPPORT #define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin" #endif // CONFIG_STA_SUPPORT // -#endif // RT2860 // #else // !UCOS // #define fATE_LOAD_EEPROM 0x0C43 @@ -69,7 +67,6 @@ do{ int (*org_remote_display)(char *) = NULL; \ #define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP) /* RT2880_iNIC will define "RT2860". */ -#ifdef RT2860 #define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \ { \ BBP_CSR_CFG_STRUC BbpCsr; \ @@ -131,10 +128,8 @@ do{ int (*org_remote_display)(char *) = NULL; \ ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP write R%d fail\n", _I)); \ } \ } -#endif // RT2860 // /* RT2880_iNIC will define RT2860. */ -#ifdef RT2860 #define EEPROM_SIZE 0x200 /* iNIC has its own EEPROM_BIN_FILE_NAME */ #ifndef UCOS @@ -142,7 +137,6 @@ do{ int (*org_remote_display)(char *) = NULL; \ #define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin" #endif // CONFIG_STA_SUPPORT // #endif // !UCOS // -#endif // RT2860 // diff --git a/drivers/staging/rt2860/rt_config.h b/drivers/staging/rt2860/rt_config.h index 7ee7a405b026..a67024fb4373 100644 --- a/drivers/staging/rt2860/rt_config.h +++ b/drivers/staging/rt2860/rt_config.h @@ -53,9 +53,7 @@ #include "rtmp_def.h" #include "rt28xx.h" -#ifdef RT2860 #include "rt2860.h" -#endif // RT2860 // #include "oid.h" diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c index f14500931efb..f3c128c72a21 100644 --- a/drivers/staging/rt2860/rt_linux.c +++ b/drivers/staging/rt2860/rt_linux.c @@ -48,10 +48,8 @@ BUILD_TIMER_FUNCTION(LeapAuthTimeout); #endif BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec); BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc); -#ifdef RT2860 BUILD_TIMER_FUNCTION(PsPollWakeExec); BUILD_TIMER_FUNCTION(RadioOnExec); -#endif // RT2860 // #ifdef QOS_DLS_SUPPORT BUILD_TIMER_FUNCTION(DlsTimeoutAction); #endif // QOS_DLS_SUPPORT // @@ -293,9 +291,7 @@ VOID RTMPFreeAdapter( NdisFreeSpinLock(&pAd->MgmtRingLock); -#ifdef RT2860 NdisFreeSpinLock(&pAd->RxRingLock); -#endif // RT2860 // for (index =0 ; index < NUM_OF_TX_RING; index++) { @@ -854,7 +850,7 @@ void send_monitor_packets( if (pRxBlk->DataSize + sizeof(wlan_ng_prism2_header) > RX_BUFFER_AGGRESIZE) { - DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header))); + DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%zu)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header))); goto err_free_sk_buff; } @@ -1005,35 +1001,14 @@ err_free_sk_buff: void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify) { - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) daemonize(pThreadName /*"%s",pAd->net_dev->name*/); allow_signal(SIGTERM); allow_signal(SIGKILL); current->flags |= PF_NOFREEZE; -#else - unsigned long flags; - - daemonize(); - reparent_to_init(); - strcpy(current->comm, pThreadName); - - siginitsetinv(¤t->blocked, sigmask(SIGTERM) | sigmask(SIGKILL)); - /* Allow interception of SIGKILL only - * Don't allow other signals to interrupt the transmission */ -#if LINUX_VERSION_CODE > KERNEL_VERSION(2,4,22) - spin_lock_irqsave(¤t->sigmask_lock, flags); - flush_signals(current); - recalc_sigpending(current); - spin_unlock_irqrestore(¤t->sigmask_lock, flags); -#endif -#endif - - /* signal that we've started the thread */ + /* signal that we've started the thread */ complete(pNotify); - } void RTMP_IndicateMediaState( diff --git a/drivers/staging/rt2860/rt_linux.h b/drivers/staging/rt2860/rt_linux.h index 0fd58f5109f2..708923cecaa2 100644 --- a/drivers/staging/rt2860/rt_linux.h +++ b/drivers/staging/rt2860/rt_linux.h @@ -65,7 +65,6 @@ #include <linux/vmalloc.h> -#include <linux/wireless.h> #include <net/iw_handler.h> // load firmware @@ -90,28 +89,22 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_ // add by kathy #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 #define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat" #define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin" #define STA_NIC_DEVICE_NAME "RT2860STA" -#define STA_DRIVER_VERSION "1.8.0.0" +#define STA_DRIVER_VERSION "1.8.1.1" #ifdef MULTIPLE_CARD_SUPPORT #define CARD_INFO_PATH "/etc/Wireless/RT2860STA/RT2860STACard.dat" #endif // MULTIPLE_CARD_SUPPORT // -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // -#ifdef RT2860 #ifndef PCI_DEVICE #define PCI_DEVICE(vend,dev) \ .vendor = (vend), .device = (dev), \ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID #endif // PCI_DEVICE // -#endif // RT2860 // - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #define RTMP_TIME_AFTER(a,b) \ (typecheck(unsigned long, (unsigned long)a) && \ @@ -123,11 +116,7 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_ typecheck(unsigned long, (unsigned long)b) && \ ((long)(a) - (long)(b) >= 0)) #define RTMP_TIME_BEFORE(a,b) RTMP_TIME_AFTER_EQ(b,a) -#else -#define RTMP_TIME_AFTER(a,b) time_after(a, b) -#endif -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #define RT_MOD_INC_USE_COUNT() \ if (!try_module_get(THIS_MODULE)) \ { \ @@ -136,10 +125,6 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_ } #define RT_MOD_DEC_USE_COUNT() module_put(THIS_MODULE); -#else -#define RT_MOD_INC_USE_COUNT() MOD_INC_USE_COUNT; -#define RT_MOD_DEC_USE_COUNT() MOD_DEC_USE_COUNT; -#endif #define OS_HZ HZ @@ -171,21 +156,12 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_ #define NDIS_PACKET_TYPE_ALL_MULTICAST 3 #endif // CONFIG_STA_SUPPORT // -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) typedef struct pid * THREAD_PID; #define THREAD_PID_INIT_VALUE NULL #define GET_PID(_v) find_get_pid(_v) #define GET_PID_NUMBER(_v) pid_nr(_v) #define CHECK_PID_LEGALITY(_pid) if (pid_nr(_pid) >= 0) #define KILL_THREAD_PID(_A, _B, _C) kill_pid(_A, _B, _C) -#else -typedef pid_t THREAD_PID; -#define THREAD_PID_INIT_VALUE -1 -#define GET_PID(_v) _v -#define GET_PID_NUMBER(_v) _v -#define CHECK_PID_LEGALITY(_pid) if (_pid >= 0) -#define KILL_THREAD_PID(_A, _B, _C) kill_proc(_A, _B, _C) -#endif struct os_lock { spinlock_t lock; @@ -194,11 +170,9 @@ struct os_lock { struct os_cookie { -#ifdef RT2860 struct pci_dev *pci_dev; struct pci_dev *parent_pci_dev; dma_addr_t pAd_pa; -#endif // RT2860 // struct tasklet_struct rx_done_task; @@ -209,9 +183,7 @@ struct os_cookie { struct tasklet_struct ac3_dma_done_task; struct tasklet_struct hcca_dma_done_task; struct tasklet_struct tbtt_task; -#ifdef RT2860 struct tasklet_struct fifo_statistic_full_task; -#endif // RT2860 // unsigned long apd_pid; //802.1x daemon pid @@ -266,7 +238,6 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int #define RT2860_PCI_DEVICE_ID 0x0601 -#ifdef RT2860 #define PCI_MAP_SINGLE(_handle, _ptr, _size, _sd_idx, _dir) \ linux_pci_map_single(_handle, _ptr, _size, _sd_idx, _dir) @@ -281,7 +252,6 @@ void linux_pci_unmap_single(void *handle, dma_addr_t dma_addr, size_t size, int #define DEV_ALLOC_SKB(_length) \ dev_alloc_skb(_length) -#endif // RT2860 // @@ -401,7 +371,6 @@ extern ULONG RTDebugLevel; spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag)); \ } -#ifdef RT2860 #if defined(INF_TWINPASS) || defined(INF_DANUBE) || defined(IKANOS_VX_1X0) //Patch for ASIC turst read/write bug, needs to remove after metel fix #define RTMP_IO_READ32(_A, _R, _pV) \ @@ -413,6 +382,12 @@ extern ULONG RTDebugLevel; (*_pV = SWAP32(*((UINT32 *)(_pV)))); \ } \ } +#define RTMP_IO_FORCE_READ32(_A, _R, _pV) \ +{ \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + (_R)))); \ + (*_pV = SWAP32(*((UINT32 *)(_pV)))); \ +} #define RTMP_IO_READ8(_A, _R, _pV) \ { \ (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ @@ -452,6 +427,11 @@ extern ULONG RTDebugLevel; else \ *_pV = 0; \ } +#define RTMP_IO_FORCE_READ32(_A, _R, _pV) \ +{ \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ + (*_pV = readl((void *)((_A)->CSRBaseAddress + (_R)))); \ +} #define RTMP_IO_READ8(_A, _R, _pV) \ { \ (*_pV = readl((void *)((_A)->CSRBaseAddress + MAC_CSR0))); \ @@ -492,7 +472,6 @@ extern ULONG RTDebugLevel; writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R))); \ } #endif -#endif // RT2860 // #ifndef wait_event_interruptible_timeout @@ -544,7 +523,6 @@ typedef void (*TIMER_FUNCTION)(unsigned long); #define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE) #define MlmeFreeMemory(_pAd, _pVA) os_free_mem(_pAd, _pVA) -#ifdef RT2860 #define BUILD_TIMER_FUNCTION(_func) \ void linux_##_func(unsigned long data) \ { \ @@ -554,7 +532,6 @@ void linux_##_func(unsigned long data) \ if (pTimer->Repeat) \ RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue); \ } -#endif // RT2860 // @@ -907,7 +884,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb); void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify); -#ifdef RT2860 #if !defined(PCI_CAP_ID_EXP) #define PCI_CAP_ID_EXP 0x10 #endif @@ -921,6 +897,5 @@ void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify); #endif #define PCIBUS_INTEL_VENDOR 0x8086 -#endif // RT2860 // diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index 3873c478f4ec..cf17bcdd7333 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -58,11 +58,7 @@ UINT32 CW_MAX_IN_BITS; char *mac = ""; // default 00:00:00:00:00:00 char *hostname = ""; // default CMPC -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,12) -MODULE_PARM (mac, "s"); -#else module_param (mac, charp, 0); -#endif MODULE_PARM_DESC (mac, "rt28xx: wireless mac addr"); @@ -75,9 +71,7 @@ extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd); #endif // DOT11_N_SUPPORT // extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd); -#ifdef RT2860 extern void init_thread_task(PRTMP_ADAPTER pAd); -#endif // RT2860 // // public function prototype INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p, @@ -87,13 +81,6 @@ INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p, static int rt28xx_init(IN struct net_device *net_dev); INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev); -#if LINUX_VERSION_CODE <= 0x20402 // Red Hat 7.1 -struct net_device *alloc_netdev( - int sizeof_priv, - const char *mask, - void (*setup)(struct net_device *)); -#endif // LINUX_VERSION_CODE // - static void CfgInitHook(PRTMP_ADAPTER pAd); #ifdef CONFIG_STA_SUPPORT @@ -235,15 +222,13 @@ int rt28xx_close(IN PNET_DEV dev) #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef RT2860 - RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE); -#endif // RT2860 // - // If dirver doesn't wake up firmware here, // NICLoadFirmware will hang forever when interface is up again. - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) || + RTMP_SET_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) || + RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)) { - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, RTMP_HALT); } #ifdef QOS_DLS_SUPPORT @@ -323,9 +308,7 @@ int rt28xx_close(IN PNET_DEV dev) #endif // WPA_SUPPLICANT_SUPPORT // MlmeRadioOff(pAd); -#ifdef RT2860 pAd->bPCIclkOff = FALSE; -#endif // RT2860 // } #endif // CONFIG_STA_SUPPORT // @@ -359,7 +342,6 @@ int rt28xx_close(IN PNET_DEV dev) TpcReqTabExit(pAd); -#ifdef RT2860 if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { NICDisableInterrupt(pAd); @@ -375,7 +357,6 @@ int rt28xx_close(IN PNET_DEV dev) RT28XX_IRQ_RELEASE(net_dev) RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } -#endif // RT2860 // // Free Ring or USB buffers @@ -439,12 +420,10 @@ static int rt28xx_init(IN struct net_device *net_dev) // Disable interrupts here which is as soon as possible // This statement should never be true. We might consider to remove it later -#ifdef RT2860 if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { NICDisableInterrupt(pAd); } -#endif // RT2860 // Status = RTMPAllocTxRxRingMemory(pAd); if (Status != NDIS_STATUS_SUCCESS) @@ -667,26 +646,6 @@ int rt28xx_open(IN PNET_DEV dev) #endif // WIRELESS_EXT >= 12 // #endif // CONFIG_APSTA_MIXED_SUPPORT // -#ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // If dirver doesn't wake up firmware here, - // NICLoadFirmware will hang forever when interface is up again. - // RT2860 PCI - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) && - OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) - { - AUTO_WAKEUP_STRUC AutoWakeupCfg; - AsicForceWakeup(pAd, TRUE); - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - } - } -#endif // RT2860 // -#endif // CONFIG_STA_SUPPORT // - // Init pObj = (POS_COOKIE)pAd->OS_Cookie; @@ -753,10 +712,8 @@ int rt28xx_open(IN PNET_DEV dev) } #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) RTMPInitPCIeLinkCtrlValue(pAd); -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // return (retval); @@ -808,9 +765,7 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p dev->stop = MainVirtualIF_close; //rt28xx_close; dev->priv_flags = INT_MAIN; dev->do_ioctl = rt28xx_ioctl; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) - dev->validate_addr = NULL; -#endif + dev->validate_addr = NULL; // find available device name for (i = 0; i < 8; i++) { @@ -821,25 +776,11 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p #endif // MULTIPLE_CARD_SUPPORT // sprintf(slot_name, "ra%d", i); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) - device = dev_get_by_name(dev_net(dev), slot_name); -#else - device = dev_get_by_name(dev->nd_net, slot_name); -#endif -#else - device = dev_get_by_name(slot_name); -#endif - if (device != NULL) dev_put(device); -#else - for (device = dev_base; device != NULL; device = device->next) - { - if (strncmp(device->name, slot_name, 4) == 0) - break; - } -#endif - if(device == NULL) + device = dev_get_by_name(dev_net(dev), slot_name); + if (device != NULL) + dev_put(device); + + if (device == NULL) break; } @@ -1252,47 +1193,28 @@ INT __devinit rt28xx_probe( PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL; INT status; PVOID handle; -#ifdef RT2860 struct pci_dev *dev_p = (struct pci_dev *)_dev_p; -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION)); #endif // CONFIG_STA_SUPPORT // -#if LINUX_VERSION_CODE <= 0x20402 // Red Hat 7.1 - net_dev = alloc_netdev(sizeof(PRTMP_ADAPTER), "eth%d", ether_setup); -#else net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER)); -#endif if (net_dev == NULL) { printk("alloc_netdev failed\n"); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) - module_put(THIS_MODULE); -#endif //LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) -#else - MOD_DEC_USE_COUNT; -#endif goto err_out; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) - SET_MODULE_OWNER(net_dev); -#endif - netif_stop_queue(net_dev); #ifdef NATIVE_WPA_SUPPLICANT_SUPPORT /* for supporting Network Manager */ /* Set the sysfs physical device reference for the network logical device * if set prior to registration will cause a symlink during initialization. */ -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) SET_NETDEV_DEV(net_dev, &(dev_p->dev)); -#endif #endif // NATIVE_WPA_SUPPLICANT_SUPPORT // // Allocate RTMP_ADAPTER miniport adapter structure @@ -1313,13 +1235,8 @@ INT __devinit rt28xx_probe( #endif // CONFIG_STA_SUPPORT // // Post config -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - if (RT28XXProbePostConfig(_dev_p, pAd, argc) == FALSE) - goto err_out_unmap; -#else if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE) goto err_out_unmap; -#endif // LINUX_VERSION_CODE // #ifdef CONFIG_STA_SUPPORT pAd->OpMode = OPMODE_STA; @@ -1362,20 +1279,12 @@ err_out_unmap: RT28XX_UNMAP(); err_out_free_netdev: -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - free_netdev(net_dev); -#else - kfree(net_dev); -#endif + free_netdev(net_dev); err_out: RT28XX_PUT_DEVICE(dev_p); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - return (LONG)NULL; -#else - return -ENODEV; /* probe fail */ -#endif // LINUX_VERSION_CODE // + return -ENODEV; /* probe fail */ } /* End of rt28xx_probe */ @@ -1495,40 +1404,6 @@ INT rt28xx_send_packets( -#if LINUX_VERSION_CODE <= 0x20402 // Red Hat 7.1 -struct net_device *alloc_netdev( - int sizeof_priv, - const char *mask, - void (*setup)(struct net_device *)) -{ - struct net_device *dev; - INT alloc_size; - - - /* ensure 32-byte alignment of the private area */ - alloc_size = sizeof (*dev) + sizeof_priv + 31; - - dev = (struct net_device *) kmalloc(alloc_size, GFP_KERNEL); - if (dev == NULL) - { - DBGPRINT(RT_DEBUG_ERROR, - ("alloc_netdev: Unable to allocate device memory.\n")); - return NULL; - } - - memset(dev, 0, alloc_size); - - if (sizeof_priv) - dev->priv = (void *) (((long)(dev + 1) + 31) & ~31); - - setup(dev); - strcpy(dev->name, mask); - - return dev; -} -#endif // LINUX_VERSION_CODE // - - void CfgInitHook(PRTMP_ADAPTER pAd) { pAd->bBroadComHT = TRUE; diff --git a/drivers/staging/rt2860/rt_profile.c b/drivers/staging/rt2860/rt_profile.c index 326a3cb52b9c..62141f376972 100644 --- a/drivers/staging/rt2860/rt_profile.c +++ b/drivers/staging/rt2860/rt_profile.c @@ -1451,7 +1451,7 @@ NDIS_STATUS RTMPReadParametersHook( IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { //PSMode - if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer)) + if (RTMPGetKeyParameter("PSMode", tmpbuf, 32, buffer)) { if (pAd->StaCfg.BssType == BSS_INFRA) { diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h index 411954206c28..b904b7886c28 100644 --- a/drivers/staging/rt2860/rtmp.h +++ b/drivers/staging/rt2860/rtmp.h @@ -203,9 +203,7 @@ typedef struct _ATE_INFO { BOOLEAN bRxFer; BOOLEAN bQATxStart; // Have compiled QA in and use it to ATE tx. BOOLEAN bQARxStart; // Have compiled QA in and use it to ATE rx. -#ifdef RT2860 BOOLEAN bFWLoading; // Reload firmware when ATE is done. -#endif // RT2860 // UINT32 RxTotalCnt; UINT32 RxCntPerSec; @@ -366,6 +364,13 @@ typedef struct _QUEUE_HEADER { #define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0) #define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F)) +// Macro for power save flag. +#define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F)) +#define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F)) +#define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0) +#define RTMP_TEST_PSFLAG(_M, _F) (((_M)->PSFlags & (_F)) != 0) +#define RTMP_TEST_PSFLAGS(_M, _F) (((_M)->PSFlags & (_F)) == (_F)) + #define OPSTATUS_SET_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags |= (_F)) #define OPSTATUS_CLEAR_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F)) #define OPSTATUS_TEST_FLAG(_pAd, _F) (((_pAd)->CommonCfg.OpStatusFlags & (_F)) != 0) @@ -478,7 +483,6 @@ typedef struct _QUEUE_HEADER { // #define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register // -#ifdef RT2860 #define RTMP_RF_IO_WRITE32(_A, _V) \ { \ PHY_CSR4_STRUC Value; \ @@ -642,7 +646,6 @@ typedef struct _QUEUE_HEADER { } \ } \ } -#endif // RT2860 // #define MAP_CHANNEL_ID_TO_KHZ(ch, khz) { \ @@ -894,7 +897,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { // Enqueue this frame to MLME engine // We need to enqueue the whole frame because MLME need to pass data type // information from 802.11 header -#ifdef RT2860 #define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \ { \ UINT32 High32TSF, Low32TSF; \ @@ -902,7 +904,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \ MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \ } -#endif // RT2860 // #define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \ NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen) @@ -919,9 +920,10 @@ typedef struct _RTMP_SCATTER_GATHER_LIST { #define STA_PORT_SECURED(_pAd) \ { \ _pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \ - NdisAcquireSpinLock(&_pAd->MacTabLock); \ + RTMP_SET_PSFLAG(_pAd, fRTMP_PS_CAN_GO_SLEEP); \ + NdisAcquireSpinLock(&(_pAd)->MacTabLock); \ _pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \ - NdisReleaseSpinLock(&_pAd->MacTabLock); \ + NdisReleaseSpinLock(&(_pAd)->MacTabLock); \ } #endif // CONFIG_STA_SUPPORT // @@ -1000,9 +1002,7 @@ typedef struct _RTMP_REORDERBUF UCHAR DataOffset; USHORT Datasize; ULONG AllocSize; -#ifdef RT2860 NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address -#endif // RT2860 // } RTMP_REORDERBUF, *PRTMP_REORDERBUF; // @@ -1101,6 +1101,7 @@ typedef struct _COUNTER_802_11 { typedef struct _COUNTER_RALINK { ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput + ULONG LastReceivedByteCount; ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput ULONG BeenDisassociatedCount; ULONG BadCQIAutoRecoveryCount; @@ -1436,11 +1437,9 @@ typedef struct _MLME_STRUCT { RALINK_TIMER_STRUCT APSDPeriodicTimer; RALINK_TIMER_STRUCT LinkDownTimer; RALINK_TIMER_STRUCT LinkUpTimer; -#ifdef RT2860 UCHAR bPsPollTimerRunning; RALINK_TIMER_STRUCT PsPollTimer; RALINK_TIMER_STRUCT RadioOnOffTimer; -#endif // RT2860 // ULONG PeriodicRound; ULONG OneSecPeriodicRound; @@ -2228,9 +2227,7 @@ typedef struct _STA_ADMIN_CONFIG { RT_HT_PHY_INFO DesiredHtPhyInfo; BOOLEAN bAutoTxRateSwitch; -#ifdef RT2860 UCHAR BBPR3; -#endif // RT2860 // #ifdef EXT_BUILD_CHANNEL_LIST UCHAR IEEE80211dClientMode; @@ -2663,7 +2660,6 @@ typedef struct _RTMP_ADAPTER PNET_DEV net_dev; ULONG VirtualIfCnt; -#ifdef RT2860 USHORT LnkCtrlBitMask; USHORT RLnkCtrlConfiguration; USHORT RLnkCtrlOffset; @@ -2671,7 +2667,9 @@ typedef struct _RTMP_ADAPTER USHORT HostLnkCtrlOffset; USHORT PCIePowerSaveLevel; BOOLEAN bPCIclkOff; // flag that indicate if the PICE power status in Configuration SPace.. - BOOLEAN bPCIclkOffDisableTx; // + ULONG CheckDmaBusyCount; // Check Interrupt Status Register Count. + USHORT ThisTbttNumToNextWakeUp; + ULONG SameRxByteCount; /*****************************************************************************************/ @@ -2688,7 +2686,6 @@ typedef struct _RTMP_ADAPTER RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA -#endif // RT2860 // NDIS_SPIN_LOCK irq_lock; @@ -2721,10 +2718,8 @@ typedef struct _RTMP_ADAPTER /* Rx related parameters */ /*****************************************************************************************/ -#ifdef RT2860 RTMP_RX_RING RxRing; NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock -#endif // RT2860 // @@ -2895,6 +2890,7 @@ typedef struct _RTMP_ADAPTER // flags, see fRTMP_ADAPTER_xxx flags ULONG Flags; // Represent current device status + ULONG PSFlags; // Power Save operation flag. // current TX sequence # USHORT Sequence; @@ -3181,7 +3177,6 @@ typedef struct _TX_BLK_ //------------------------------------------------------------------------------------------ -#ifdef RT2860 // // Enable & Disable NIC interrupt via writing interrupt mask register // Since it use ADAPTER structure, it have to be put after structure definition. @@ -3214,7 +3209,6 @@ __inline VOID NICEnableInterrupt( //RTMP_IO_WRITE32(pAd, PBF_INT_ENA, 0x00000030); // 1 : enable RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE); } -#endif // RT2860 // #ifdef RT_BIG_ENDIAN static inline VOID WriteBackToDescriptor( @@ -3291,7 +3285,6 @@ static inline VOID RTMPWIEndianChange( Call this function when read or update descriptor ======================================================================== */ -#ifdef RT2860 static inline VOID RTMPDescriptorEndianChange( IN PUCHAR pData, IN ULONG DescriptorType) @@ -3301,7 +3294,6 @@ static inline VOID RTMPDescriptorEndianChange( *((UINT32 *)(pData +12)) = SWAP32(*((UINT32 *)(pData + 12))); // Byte 12~15 *((UINT32 *)(pData + 4)) = SWAP32(*((UINT32 *)(pData + 4))); // Byte 4~7, this must be swapped last } -#endif // RT2860 // /* ======================================================================== @@ -3550,6 +3542,9 @@ NDIS_STATUS NICInitializeAsic( IN PRTMP_ADAPTER pAd, IN BOOLEAN bHardReset); +VOID NICRestoreBBPValue( + IN PRTMP_ADAPTER pAd); + VOID NICIssueReset( IN PRTMP_ADAPTER pAd); @@ -4208,7 +4203,7 @@ VOID AsicForceSleep( VOID AsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx); + IN UCHAR Level); #endif // CONFIG_STA_SUPPORT // VOID AsicSetBssid( @@ -4304,11 +4299,9 @@ BOOLEAN AsicSendCommandToMcu( IN UCHAR Arg0, IN UCHAR Arg1); -#ifdef RT2860 BOOLEAN AsicCheckCommanOk( IN PRTMP_ADAPTER pAd, IN UCHAR Command); -#endif // RT2860 // VOID MacAddrRandomBssid( IN PRTMP_ADAPTER pAd, @@ -6978,7 +6971,6 @@ void kill_thread_task(PRTMP_ADAPTER pAd); void tbtt_tasklet(unsigned long data); -#ifdef RT2860 // // Function Prototype in cmm_data_2860.c // @@ -7069,7 +7061,7 @@ BOOLEAN RT28xxPciAsicRadioOn( VOID RT28xxPciStaAsicForceWakeup( IN PRTMP_ADAPTER pAd, - IN BOOLEAN bFromTx); + IN UCHAR Level); VOID RT28xxPciStaAsicSleepThenAutoWakeup( IN PRTMP_ADAPTER pAd, @@ -7093,7 +7085,6 @@ VOID RT28xxPciMlmeRadioOn( VOID RT28xxPciMlmeRadioOFF( IN PRTMP_ADAPTER pAd); -#endif // RT2860 // VOID AsicTurnOffRFClk( IN PRTMP_ADAPTER pAd, @@ -7132,6 +7123,18 @@ PCHAR RTMPGetRalinkEncryModeStr( #ifdef CONFIG_STA_SUPPORT VOID AsicStaBbpTuning( IN PRTMP_ADAPTER pAd); + +VOID AsicResetFromDMABusy( + IN PRTMP_ADAPTER pAd); + +VOID AsicResetBBP( + IN PRTMP_ADAPTER pAd); + +VOID AsicResetMAC( + IN PRTMP_ADAPTER pAd); + +VOID AsicResetPBF( + IN PRTMP_ADAPTER pAd); #endif // CONFIG_STA_SUPPORT // void RTMP_IndicateMediaState( diff --git a/drivers/staging/rt2860/rtmp_def.h b/drivers/staging/rt2860/rtmp_def.h index be982147883f..25a53d83a0d7 100644 --- a/drivers/staging/rt2860/rtmp_def.h +++ b/drivers/staging/rt2860/rtmp_def.h @@ -111,7 +111,6 @@ // Entry number for each DMA descriptor ring // -#ifdef RT2860 #define TX_RING_SIZE 64 //64 #define MGMT_RING_SIZE 128 #define RX_RING_SIZE 128 //64 @@ -119,7 +118,6 @@ #define MAX_DMA_DONE_PROCESS TX_RING_SIZE #define MAX_TX_DONE_PROCESS TX_RING_SIZE //8 #define LOCAL_TXBUF_SIZE 2 -#endif // RT2860 // #ifdef MULTIPLE_CARD_SUPPORT @@ -212,6 +210,19 @@ #define fOP_STATUS_WAKEUP_NOW 0x00008000 #define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000 +// +// RTMP_ADAPTER PSFlags : related to advanced power save. +// +// Indicate whether driver can go to sleep mode from now. This flag is useful AFTER link up +#define fRTMP_PS_CAN_GO_SLEEP 0x00000001 +// Indicate whether driver has issue a LinkControl command to PCIe L1 +#define fRTMP_PS_SET_PCI_CLK_OFF_COMMAND 0x00000002 +// Indicate driver should disable kick off hardware to send packets from now. +#define fRTMP_PS_DISABLE_TX 0x00000004 +// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me +//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine. +#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008 + #ifdef DOT11N_DRAFT3 #define fOP_STATUS_SCAN_2040 0x00040000 #endif // DOT11N_DRAFT3 // @@ -1514,12 +1525,14 @@ #define MCAST_HTMIX 3 #endif // MCAST_RATE_SPECIFIC // -// For AsicRadioOff/AsicRadioOn function -#define DOT11POWERSAVE 0 -#define GUIRADIO_OFF 1 -#define RTMP_HALT 2 -#define GUI_IDLE_POWER_SAVE 3 -// -- +// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function +// This is to indicate from where to call this function. +#define DOT11POWERSAVE 0 // TO do .11 power save sleep +#define GUIRADIO_OFF 1 // To perform Radio OFf command from GUI +#define RTMP_HALT 2 // Called from Halt handler. +#define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP +#define FROM_TX 4 // Force wake up from Tx packet. + // definition for WpaSupport flag diff --git a/drivers/staging/rt2860/sta/assoc.c b/drivers/staging/rt2860/sta/assoc.c index 42db753eed70..34f1c1490f44 100644 --- a/drivers/staging/rt2860/sta/assoc.c +++ b/drivers/staging/rt2860/sta/assoc.c @@ -473,12 +473,7 @@ VOID MlmeAssocReqAction( RSNIe = IE_WPA2; } -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT -#ifdef SIOCSIWGENIE - if (pAd->StaCfg.WpaSupplicantUP != 1) -#endif // SIOCSIWGENIE // -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // - RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0); + RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0); // Check for WPA PMK cache list if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) @@ -504,17 +499,6 @@ VOID MlmeAssocReqAction( } } -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT -#ifdef SIOCSIWGENIE - if (pAd->StaCfg.WpaSupplicantUP == 1) - { - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - pAd->StaCfg.RSNIE_Len, pAd->StaCfg.RSN_IE, - END_OF_ARGS); - } - else -#endif -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // { MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, 1, &RSNIe, @@ -525,11 +509,6 @@ VOID MlmeAssocReqAction( FrameLen += tmp; -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT -#ifdef SIOCSIWGENIE - if (pAd->StaCfg.WpaSupplicantUP != 1) -#endif -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // { // Append Variable IE NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1); diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c index 36f28f8b4aa4..d8bcc76688a6 100644 --- a/drivers/staging/rt2860/sta/connect.c +++ b/drivers/staging/rt2860/sta/connect.c @@ -337,6 +337,10 @@ VOID CntlOidSsidProc( MLME_DISASSOC_REQ_STRUCT DisassocReq; ULONG Now; + // BBP and RF are not accessible in PS mode, we has to wake them up first + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + AsicForceWakeup(pAd, RTMP_HALT); + // Step 1. record the desired user settings to MlmeAux NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID); NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength); @@ -1240,6 +1244,13 @@ VOID LinkUp( UCHAR Value = 0, idx; MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry; + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + } + pEntry = &pAd->MacTab.Content[BSSID_WCID]; // @@ -1264,7 +1275,6 @@ VOID LinkUp( //rt2860b. Don't know why need this SwitchBetweenWepAndCkip(pAd); -#ifdef RT2860 // Before power save before link up function, We will force use 1R. // So after link up, check Rx antenna # again. RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); @@ -1282,7 +1292,6 @@ VOID LinkUp( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); pAd->StaCfg.BBPR3 = Value; -#endif // RT2860 // if (BssType == BSS_ADHOC) { @@ -1330,9 +1339,7 @@ VOID LinkUp( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); Value &= (~0x20); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); -#ifdef RT2860 pAd->StaCfg.BBPR3 = Value; -#endif // RT2860 // RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data); Data &= 0xfffffffe; @@ -1367,9 +1374,7 @@ VOID LinkUp( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); Value |= (0x20); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); -#ifdef RT2860 pAd->StaCfg.BBPR3 = Value; -#endif // RT2860 // if (pAd->MACVersion == 0x28600100) { @@ -1400,9 +1405,7 @@ VOID LinkUp( RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value); Value &= (~0x20); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value); -#ifdef RT2860 pAd->StaCfg.BBPR3 = Value; -#endif // RT2860 // if (pAd->MACVersion == 0x28600100) { @@ -1598,6 +1601,8 @@ VOID LinkUp( IV = 0; IV |= (pAd->StaCfg.DefaultKeyId << 30); AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0); + + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); } // NOTE: // the decision of using "short slot time" or not may change dynamically due to @@ -1919,6 +1924,7 @@ VOID LinkUp( } RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); #ifdef DOT11_N_SUPPORT #ifdef DOT11N_DRAFT3 @@ -1961,6 +1967,7 @@ VOID LinkDown( IN BOOLEAN IsReqFromAP) { UCHAR i, ByteValue = 0; + BOOLEAN Cancelled; // Do nothing if monitor mode is on if (MONITOR_ON(pAd)) @@ -1972,6 +1979,12 @@ VOID LinkDown( return; #endif // RALINK_ATE // + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); + RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); + + // Not allow go to sleep within linkdown function. + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (pAd->CommonCfg.bWirelessEvent) { RTMPSendWirelessEvent(pAd, IW_STA_LINKDOWN_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); @@ -1980,7 +1993,6 @@ VOID LinkDown( DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n")); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED); -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { BOOLEAN Cancelled; @@ -1988,17 +2000,15 @@ VOID LinkDown( RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); } - if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) || + RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) || + RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)) { - AUTO_WAKEUP_STRUC AutoWakeupCfg; - AsicForceWakeup(pAd, TRUE); - AutoWakeupCfg.word = 0; - RTMP_IO_WRITE32(pAd, AUTO_WAKEUP_CFG, AutoWakeupCfg.word); + AsicForceWakeup(pAd, RTMP_HALT); OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); } pAd->bPCIclkOff = FALSE; -#endif // RT2860 // if (ADHOC_ON(pAd)) // Adhoc mode link down { DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n")); @@ -2266,6 +2276,9 @@ VOID LinkDown( RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS); + // Allow go to sleep after linkdown steps. + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + #ifdef WPA_SUPPLICANT_SUPPORT #ifndef NATIVE_WPA_SUPPLICANT_SUPPORT if (pAd->StaCfg.WpaSupplicantUP) { @@ -2510,7 +2523,6 @@ VOID AuthParmFill( ========================================================================== */ -#ifdef RT2860 VOID ComposePsPoll( IN PRTMP_ADAPTER pAd) { @@ -2534,7 +2546,6 @@ VOID ComposeNullFrame( COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress); COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid); } -#endif // RT2860 // diff --git a/drivers/staging/rt2860/sta/dls.c b/drivers/staging/rt2860/sta/dls.c index 78fb28976fd7..873cf7f1de93 100644 --- a/drivers/staging/rt2860/sta/dls.c +++ b/drivers/staging/rt2860/sta/dls.c @@ -1419,7 +1419,6 @@ BOOLEAN RTMPRcvFrameDLSCheck( //AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE); // reserve 0 for multicast, 1 for unicast //AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr); // Add Pair-wise key to Asic -#ifdef RT2860 AsicAddPairwiseKeyEntry(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, (UCHAR)pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, @@ -1431,7 +1430,6 @@ BOOLEAN RTMPRcvFrameDLSCheck( PairwiseKey.CipherAlg, pEntry); -#endif // RT2860 // NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY)); DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Peer STA MAC Address STAKey) \n")); @@ -1477,7 +1475,6 @@ BOOLEAN RTMPRcvFrameDLSCheck( //AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE); // reserve 0 for multicast, 1 for unicast //AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr); // Add Pair-wise key to Asic -#ifdef RT2860 AsicAddPairwiseKeyEntry(pAd, pAd->StaCfg.DLSEntry[i].MacAddr, (UCHAR)pAd->StaCfg.DLSEntry[i].MacTabMatchWCID, @@ -1488,7 +1485,6 @@ BOOLEAN RTMPRcvFrameDLSCheck( 0, PairwiseKey.CipherAlg, pEntry); -#endif // RT2860 // NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY)); DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Initiator STA MAC Address STAKey)\n")); diff --git a/drivers/staging/rt2860/sta/rtmp_data.c b/drivers/staging/rt2860/sta/rtmp_data.c index 36aff247cd95..c5e76a2da56d 100644 --- a/drivers/staging/rt2860/sta/rtmp_data.c +++ b/drivers/staging/rt2860/sta/rtmp_data.c @@ -75,7 +75,6 @@ VOID STARxEAPOLFrameIndicate( if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0) { -#ifdef RT2860 MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[BSSID_WCID]; // Set key material and cipherAlg to Asic @@ -89,7 +88,6 @@ VOID STARxEAPOLFrameIndicate( pAd->IndicateMediaState = NdisMediaStateConnected; pAd->ExtraInfo = GENERAL_LINK_UP; -#endif // RT2860 // // For Preventing ShardKey Table is cleared by remove key procedure. pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg; pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen; @@ -693,14 +691,12 @@ BOOLEAN STARxDoneInterruptHandle( break; } -#ifdef RT2860 if (RxProcessed++ > MAX_RX_PROCESS_CNT) { // need to reschedule rx handle bReschedule = TRUE; break; } -#endif // RT2860 // RxProcessed ++; // test @@ -811,6 +807,13 @@ BOOLEAN STARxDoneInterruptHandle( } } + // fRTMP_PS_GO_TO_SLEEP_NOW is set if receiving beacon. + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW) && (INFRA_ON(pAd))) + { + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); + AsicSleepThenAutoWakeup(pAd, pAd->ThisTbttNumToNextWakeUp); + bReschedule = FALSE; + } return bReschedule; } @@ -828,7 +831,7 @@ BOOLEAN STARxDoneInterruptHandle( VOID RTMPHandleTwakeupInterrupt( IN PRTMP_ADAPTER pAd) { - AsicForceWakeup(pAd, FALSE); + AsicForceWakeup(pAd, DOT11POWERSAVE); } /* @@ -1220,7 +1223,6 @@ NDIS_STATUS STASendPacket( ======================================================================== */ -#ifdef RT2860 NDIS_STATUS RTMPFreeTXDRequest( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -1264,7 +1266,6 @@ NDIS_STATUS RTMPFreeTXDRequest( return (Status); } -#endif // RT2860 // @@ -1889,7 +1890,8 @@ VOID STA_AMPDU_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); pAd->RalinkCounters.KickTxCount++; pAd->RalinkCounters.OneSecTxDoneCount++; @@ -2019,7 +2021,8 @@ VOID STA_AMSDU_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } #endif // DOT11_N_SUPPORT // @@ -2139,7 +2142,8 @@ VOID STA_Legacy_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -2249,7 +2253,8 @@ VOID STA_ARalink_Frame_Tx( // // Kick out Tx // - HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); + if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_DISABLE_TX)) + HAL_KickOutTx(pAd, pTxBlk, pTxBlk->QueIdx); } @@ -2526,7 +2531,7 @@ NDIS_STATUS STAHardTransmit( if ((pAd->StaCfg.Psm == PWR_SAVE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicForceWakeup At HardTx\n")); - AsicForceWakeup(pAd, TRUE); + AsicForceWakeup(pAd, FROM_TX); } // It should not change PSM bit, when APSD turn on. diff --git a/drivers/staging/rt2860/sta/sync.c b/drivers/staging/rt2860/sta/sync.c index d196f85395ce..148037a79d51 100644 --- a/drivers/staging/rt2860/sta/sync.c +++ b/drivers/staging/rt2860/sta/sync.c @@ -228,7 +228,6 @@ VOID MlmeScanReqAction( // Increase the scan retry counters. pAd->StaCfg.ScanCnt++; -#ifdef RT2860 if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && (IDLE_ON(pAd)) && (pAd->StaCfg.bRadio == TRUE) && @@ -236,7 +235,6 @@ VOID MlmeScanReqAction( { RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE); } -#endif // RT2860 // // first check the parameter sanity if (MlmeScanReqSanity(pAd, @@ -349,7 +347,6 @@ VOID MlmeJoinReqAction( DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx)); -#ifdef RT2860 if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) && (IDLE_ON(pAd)) && (pAd->StaCfg.bRadio == TRUE) && @@ -357,7 +354,6 @@ VOID MlmeJoinReqAction( { RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE); } -#endif // RT2860 // // reset all the timers RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled); @@ -1532,13 +1528,10 @@ VOID PeerBeacon( // 5. otherwise, put PHY back to sleep to save battery. if (MessageToMe) { -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); - // Turn clk to 80Mhz. } -#endif // RT2860 // if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable && pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO) { @@ -1549,12 +1542,10 @@ VOID PeerBeacon( } else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM)) { -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); } -#endif // RT2860 // } else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0) || (pAd->TxSwQueue[QID_AC_BE].Number != 0) || @@ -1568,12 +1559,10 @@ VOID PeerBeacon( { // TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme // can we cheat here (i.e. just check MGMT & AC_BE) for better performance? -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3); } -#endif // RT2860 // } else { @@ -1588,7 +1577,10 @@ VOID PeerBeacon( if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { - AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); + // Set a flag to go to sleep . Then after parse this RxDoneInterrupt, will go to sleep mode. + RTMP_SET_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW); + pAd->ThisTbttNumToNextWakeUp = TbttNumToNextWakeUp; + //AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp); } } } diff --git a/drivers/staging/rt2860/sta/wpa.c b/drivers/staging/rt2860/sta/wpa.c index 774c6567ae53..2609d845fd5c 100644 --- a/drivers/staging/rt2860/sta/wpa.c +++ b/drivers/staging/rt2860/sta/wpa.c @@ -1384,6 +1384,10 @@ VOID WpaGroupMsg1Action( pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP; else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128; //hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK); } @@ -1760,7 +1764,7 @@ BOOLEAN ParseKeyData( // Get GTK length - refer to IEEE 802.11i-2004 p.82 GTKLEN = pKDE->Len -6; - if (GTKLEN < LEN_AES_KEY) + if (GTKLEN < MIN_LEN_OF_GTK) { DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN)); return FALSE; @@ -1786,6 +1790,10 @@ BOOLEAN ParseKeyData( pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP; else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64; + else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) + pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128; return TRUE; diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index 3ea2b2c4ab0e..c5452f152a21 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -49,15 +49,9 @@ extern ULONG RTDebugLevel; #define GROUP_KEY_NO 4 -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) #define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E) iwe_stream_add_event(_A, _B, _C, _D, _E) #define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E) iwe_stream_add_point(_A, _B, _C, _D, _E) #define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F) iwe_stream_add_value(_A, _B, _C, _D, _E, _F) -#else -#define IWE_STREAM_ADD_EVENT(_A, _B, _C, _D, _E) iwe_stream_add_event(_B, _C, _D, _E) -#define IWE_STREAM_ADD_POINT(_A, _B, _C, _D, _E) iwe_stream_add_point(_B, _C, _D, _E) -#define IWE_STREAM_ADD_VALUE(_A, _B, _C, _D, _E, _F) iwe_stream_add_value(_B, _C, _D, _E, _F) -#endif extern UCHAR CipherWpa2Template[]; extern UCHAR CipherWpaPskTkip[]; @@ -358,6 +352,20 @@ VOID RTMPAddKey( DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n")); + RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + if (pAd->StaCfg.bRadio == FALSE) + { + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + return; + } + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc1==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_HALT); + RTMPusecDelay(6000); + pAd->bPCIclkOff = FALSE; + } + if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) { if (pKey->KeyIndex & 0x80000000) @@ -551,6 +559,8 @@ VOID RTMPAddKey( } } end: + RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); + DBGPRINT(RT_DEBUG_INFO, ("<------ RTMPAddKey\n")); return; } @@ -573,9 +583,7 @@ rt_ioctl_giwname(struct net_device *dev, { // PRTMP_ADAPTER pAdapter = dev->ml_priv; -#ifdef RT2860 strncpy(name, "RT2860 Wireless", IFNAMSIZ); -#endif // RT2860 // return 0; } @@ -670,11 +678,9 @@ int rt_ioctl_siwmode(struct net_device *dev, case IW_MODE_INFRA: Set_NetworkType_Proc(pAdapter, "Infra"); break; -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20)) case IW_MODE_MONITOR: Set_NetworkType_Proc(pAdapter, "Monitor"); break; -#endif default: DBGPRINT(RT_DEBUG_TRACE, ("===>rt_ioctl_siwmode::SIOCSIWMODE (unknown %d)\n", *mode)); return -EINVAL; @@ -715,12 +721,10 @@ int rt_ioctl_giwmode(struct net_device *dev, *mode = IW_MODE_ADHOC; else if (INFRA_ON(pAdapter)) *mode = IW_MODE_INFRA; -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20)) else if (MONITOR_ON(pAdapter)) { *mode = IW_MODE_MONITOR; } -#endif else *mode = IW_MODE_AUTO; @@ -1038,6 +1042,15 @@ int rt_ioctl_siwscan(struct net_device *dev, return -EINVAL; } + if ((pAdapter->OpMode == OPMODE_STA) && (IDLE_ON(pAdapter)) + && (pAdapter->StaCfg.bRadio == TRUE) + && (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_IDLE_RADIO_OFF))) + { + RT28xxPciAsicRadioOn(pAdapter, GUI_IDLE_POWER_SAVE); + } + // Check if still radio off. + else if (pAdapter->bPCIclkOff == TRUE) + return 0; #ifdef WPA_SUPPLICANT_SUPPORT if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE) @@ -1756,7 +1769,7 @@ int rt_ioctl_siwencode(struct net_device *dev, } else /* Don't complain if only change the mode */ - if(!erq->flags & IW_ENCODE_MODE) { + if (!(erq->flags & IW_ENCODE_MODE)) { return -EINVAL; } } @@ -2161,12 +2174,6 @@ rt_private_show(struct net_device *dev, struct iw_request_info *info, wrq->length = strlen(extra) + 1; // 1: size of '\0' break; case RAIO_ON: - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) - { - sprintf(extra, "Scanning\n"); - wrq->length = strlen(extra) + 1; // 1: size of '\0' - break; - } pAd->StaCfg.bSwRadio = TRUE; //if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio)) { @@ -2450,6 +2457,20 @@ void fnSetCipherKey( IN BOOLEAN bGTK, IN struct iw_encode_ext *ext) { + RTMP_CLEAR_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); + if (RTMP_TEST_PSFLAG(pAdapter, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)) + { + if (pAdapter->StaCfg.bRadio == FALSE) + { + RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); + return; + } + DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc1==>\n")); + RTMPPCIeLinkCtrlValueRestore(pAdapter, RESTORE_HALT); + RTMPusecDelay(6000); + pAdapter->bPCIclkOff = FALSE; + } + NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY)); pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK; NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK); @@ -2480,6 +2501,8 @@ void fnSetCipherKey( keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, &pAdapter->MacTab.Content[BSSID_WCID]); + + RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP); } int rt_ioctl_siwencodeext(struct net_device *dev, @@ -2544,6 +2567,21 @@ int rt_ioctl_siwencodeext(struct net_device *dev, NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16); NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len); + + if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled || + pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) + { + // Set Group key material to Asic + AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, pAdapter->SharedKey[BSS0][keyIdx].Key, NULL, NULL); + + // Update WCID attribute table and IVEIV table for this group key table + RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx].CipherAlg, NULL); + + STA_PORT_SECURED(pAdapter); + + // Indicate Connected for GUI + pAdapter->IndicateMediaState = NdisMediaStateConnected; + } break; case IW_ENCODE_ALG_TKIP: DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len)); @@ -4259,7 +4297,23 @@ INT RTMPSetInformation( } #ifdef WPA_SUPPLICANT_SUPPORT - if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) + if ((pAdapter->StaCfg.WpaSupplicantUP != 0) && + (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) + { + Key = pWepKey->KeyMaterial; + + // Set Group key material to Asic + AsicAddSharedKeyEntry(pAdapter, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL); + + // Update WCID attribute table and IVEIV table for this group key table + RTMPAddWcidAttributeEntry(pAdapter, BSS0, KeyIdx, CipherAlg, NULL); + + STA_PORT_SECURED(pAdapter); + + // Indicate Connected for GUI + pAdapter->IndicateMediaState = NdisMediaStateConnected; + } + else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED) #endif // WPA_SUPPLICANT_SUPPORT { Key = pAdapter->SharedKey[BSS0][KeyIdx].Key; @@ -5265,7 +5319,6 @@ INT RTMPQueryInformation( case RT_OID_802_11_PRODUCTID: DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n")); -#ifdef RT2860 { USHORT device_id; @@ -5275,7 +5328,6 @@ INT RTMPQueryInformation( DBGPRINT(RT_DEBUG_TRACE, (" pci_dev = NULL\n")); sprintf(tmp, "%04x %04x\n", NIC_PCI_VENDOR_ID, device_id); } -#endif // RT2860 // wrq->u.data.length = strlen(tmp); Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length); break; diff --git a/drivers/staging/rt2860/wpa.h b/drivers/staging/rt2860/wpa.h index 88c7c8bf3fcd..0134ae6097cf 100644 --- a/drivers/staging/rt2860/wpa.h +++ b/drivers/staging/rt2860/wpa.h @@ -90,6 +90,7 @@ #define TKIP_AP_RXMICK_OFFSET (TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK) #define TKIP_GTK_LENGTH ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK)) #define LEN_PTK ((LEN_EAP_KEY)+(LEN_TKIP_KEY)) +#define MIN_LEN_OF_GTK 5 // RSN IE Length definition #define MAX_LEN_OF_RSNIE 90 |