diff options
Diffstat (limited to 'include/linux/dm-ioctl.h')
| -rw-r--r-- | include/linux/dm-ioctl.h | 339 |
1 files changed, 0 insertions, 339 deletions
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h deleted file mode 100644 index 91e3a360f611..000000000000 --- a/include/linux/dm-ioctl.h +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited. - * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved. - * - * This file is released under the LGPL. - */ - -#ifndef _LINUX_DM_IOCTL_V4_H -#define _LINUX_DM_IOCTL_V4_H - -#include <linux/types.h> - -#define DM_DIR "mapper" /* Slashes not supported */ -#define DM_CONTROL_NODE "control" -#define DM_MAX_TYPE_NAME 16 -#define DM_NAME_LEN 128 -#define DM_UUID_LEN 129 - -/* - * A traditional ioctl interface for the device mapper. - * - * Each device can have two tables associated with it, an - * 'active' table which is the one currently used by io passing - * through the device, and an 'inactive' one which is a table - * that is being prepared as a replacement for the 'active' one. - * - * DM_VERSION: - * Just get the version information for the ioctl interface. - * - * DM_REMOVE_ALL: - * Remove all dm devices, destroy all tables. Only really used - * for debug. - * - * DM_LIST_DEVICES: - * Get a list of all the dm device names. - * - * DM_DEV_CREATE: - * Create a new device, neither the 'active' or 'inactive' table - * slots will be filled. The device will be in suspended state - * after creation, however any io to the device will get errored - * since it will be out-of-bounds. - * - * DM_DEV_REMOVE: - * Remove a device, destroy any tables. - * - * DM_DEV_RENAME: - * Rename a device or set its uuid if none was previously supplied. - * - * DM_SUSPEND: - * This performs both suspend and resume, depending which flag is - * passed in. - * Suspend: This command will not return until all pending io to - * the device has completed. Further io will be deferred until - * the device is resumed. - * Resume: It is no longer an error to issue this command on an - * unsuspended device. If a table is present in the 'inactive' - * slot, it will be moved to the active slot, then the old table - * from the active slot will be _destroyed_. Finally the device - * is resumed. - * - * DM_DEV_STATUS: - * Retrieves the status for the table in the 'active' slot. - * - * DM_DEV_WAIT: - * Wait for a significant event to occur to the device. This - * could either be caused by an event triggered by one of the - * targets of the table in the 'active' slot, or a table change. - * - * DM_TABLE_LOAD: - * Load a table into the 'inactive' slot for the device. The - * device does _not_ need to be suspended prior to this command. - * - * DM_TABLE_CLEAR: - * Destroy any table in the 'inactive' slot (ie. abort). - * - * DM_TABLE_DEPS: - * Return a set of device dependencies for the 'active' table. - * - * DM_TABLE_STATUS: - * Return the targets status for the 'active' table. - * - * DM_TARGET_MSG: - * Pass a message string to the target at a specific offset of a device. - * - * DM_DEV_SET_GEOMETRY: - * Set the geometry of a device by passing in a string in this format: - * - * "cylinders heads sectors_per_track start_sector" - * - * Beware that CHS geometry is nearly obsolete and only provided - * for compatibility with dm devices that can be booted by a PC - * BIOS. See struct hd_geometry for range limits. Also note that - * the geometry is erased if the device size changes. - */ - -/* - * All ioctl arguments consist of a single chunk of memory, with - * this structure at the start. If a uuid is specified any - * lookup (eg. for a DM_INFO) will be done on that, *not* the - * name. - */ -struct dm_ioctl { - /* - * The version number is made up of three parts: - * major - no backward or forward compatibility, - * minor - only backwards compatible, - * patch - both backwards and forwards compatible. - * - * All clients of the ioctl interface should fill in the - * version number of the interface that they were - * compiled with. - * - * All recognised ioctl commands (ie. those that don't - * return -ENOTTY) fill out this field, even if the - * command failed. - */ - __u32 version[3]; /* in/out */ - __u32 data_size; /* total size of data passed in - * including this struct */ - - __u32 data_start; /* offset to start of data - * relative to start of this struct */ - - __u32 target_count; /* in/out */ - __s32 open_count; /* out */ - __u32 flags; /* in/out */ - - /* - * event_nr holds either the event number (input and output) or the - * udev cookie value (input only). - * The DM_DEV_WAIT ioctl takes an event number as input. - * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls - * use the field as a cookie to return in the DM_COOKIE - * variable with the uevents they issue. - * For output, the ioctls return the event number, not the cookie. - */ - __u32 event_nr; /* in/out */ - __u32 padding; - - __u64 dev; /* in/out */ - - char name[DM_NAME_LEN]; /* device name */ - char uuid[DM_UUID_LEN]; /* unique identifier for - * the block device */ - char data[7]; /* padding or data */ -}; - -/* - * Used to specify tables. These structures appear after the - * dm_ioctl. - */ -struct dm_target_spec { - __u64 sector_start; - __u64 length; - __s32 status; /* used when reading from kernel only */ - - /* - * Location of the next dm_target_spec. - * - When specifying targets on a DM_TABLE_LOAD command, this value is - * the number of bytes from the start of the "current" dm_target_spec - * to the start of the "next" dm_target_spec. - * - When retrieving targets on a DM_TABLE_STATUS command, this value - * is the number of bytes from the start of the first dm_target_spec - * (that follows the dm_ioctl struct) to the start of the "next" - * dm_target_spec. - */ - __u32 next; - - char target_type[DM_MAX_TYPE_NAME]; - - /* - * Parameter string starts immediately after this object. - * Be careful to add padding after string to ensure correct - * alignment of subsequent dm_target_spec. - */ -}; - -/* - * Used to retrieve the target dependencies. - */ -struct dm_target_deps { - __u32 count; /* Array size */ - __u32 padding; /* unused */ - __u64 dev[0]; /* out */ -}; - -/* - * Used to get a list of all dm devices. - */ -struct dm_name_list { - __u64 dev; - __u32 next; /* offset to the next record from - the _start_ of this */ - char name[0]; -}; - -/* - * Used to retrieve the target versions - */ -struct dm_target_versions { - __u32 next; - __u32 version[3]; - - char name[0]; -}; - -/* - * Used to pass message to a target - */ -struct dm_target_msg { - __u64 sector; /* Device sector */ - - char message[0]; -}; - -/* - * If you change this make sure you make the corresponding change - * to dm-ioctl.c:lookup_ioctl() - */ -enum { - /* Top level cmds */ - DM_VERSION_CMD = 0, - DM_REMOVE_ALL_CMD, - DM_LIST_DEVICES_CMD, - - /* device level cmds */ - DM_DEV_CREATE_CMD, - DM_DEV_REMOVE_CMD, - DM_DEV_RENAME_CMD, - DM_DEV_SUSPEND_CMD, - DM_DEV_STATUS_CMD, - DM_DEV_WAIT_CMD, - - /* Table level cmds */ - DM_TABLE_LOAD_CMD, - DM_TABLE_CLEAR_CMD, - DM_TABLE_DEPS_CMD, - DM_TABLE_STATUS_CMD, - - /* Added later */ - DM_LIST_VERSIONS_CMD, - DM_TARGET_MSG_CMD, - DM_DEV_SET_GEOMETRY_CMD -}; - -#define DM_IOCTL 0xfd - -#define DM_VERSION _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl) -#define DM_REMOVE_ALL _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl) -#define DM_LIST_DEVICES _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl) - -#define DM_DEV_CREATE _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl) -#define DM_DEV_REMOVE _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl) -#define DM_DEV_RENAME _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl) -#define DM_DEV_SUSPEND _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl) -#define DM_DEV_STATUS _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl) -#define DM_DEV_WAIT _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl) - -#define DM_TABLE_LOAD _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl) -#define DM_TABLE_CLEAR _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl) -#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl) -#define DM_TABLE_STATUS _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl) - -#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl) - -#define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl) -#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) - -#define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 23 -#define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2012-07-25)" - -/* Status bits */ -#define DM_READONLY_FLAG (1 << 0) /* In/Out */ -#define DM_SUSPEND_FLAG (1 << 1) /* In/Out */ -#define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */ - -/* - * Flag passed into ioctl STATUS command to get table information - * rather than current status. - */ -#define DM_STATUS_TABLE_FLAG (1 << 4) /* In */ - -/* - * Flags that indicate whether a table is present in either of - * the two table slots that a device has. - */ -#define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */ -#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */ - -/* - * Indicates that the buffer passed in wasn't big enough for the - * results. - */ -#define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */ - -/* - * This flag is now ignored. - */ -#define DM_SKIP_BDGET_FLAG (1 << 9) /* In */ - -/* - * Set this to avoid attempting to freeze any filesystem when suspending. - */ -#define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */ - -/* - * Set this to suspend without flushing queued ios. - * Also disables flushing uncommitted changes in the thin target before - * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT. - */ -#define DM_NOFLUSH_FLAG (1 << 11) /* In */ - -/* - * If set, any table information returned will relate to the inactive - * table instead of the live one. Always check DM_INACTIVE_PRESENT_FLAG - * is set before using the data returned. - */ -#define DM_QUERY_INACTIVE_TABLE_FLAG (1 << 12) /* In */ - -/* - * If set, a uevent was generated for which the caller may need to wait. - */ -#define DM_UEVENT_GENERATED_FLAG (1 << 13) /* Out */ - -/* - * If set, rename changes the uuid not the name. Only permitted - * if no uuid was previously supplied: an existing uuid cannot be changed. - */ -#define DM_UUID_FLAG (1 << 14) /* In */ - -/* - * If set, all buffers are wiped after use. Use when sending - * or requesting sensitive data such as an encryption key. - */ -#define DM_SECURE_DATA_FLAG (1 << 15) /* In */ - -#endif /* _LINUX_DM_IOCTL_H */ |