aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/driver-api (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-03-11iio: kfifo: add devm_iio_kfifo_buffer_setup() helperAlexandru Ardelean1-0/+1
This change adds the devm_iio_kfifo_buffer_setup() helper/short-hand, which groups the simple routine of allocating a kfifo buffers via devm_iio_kfifo_allocate() and calling iio_device_attach_buffer(). The mode_flags parameter is required, as the IIO kfifo supports 2 modes: INDIO_BUFFER_SOFTWARE & INDIO_BUFFER_TRIGGERED. The setup_ops parameter is optional. This function will be a bit more useful when needing to define multiple buffers per IIO device. The naming for this function has been inspired from iio_triggered_buffer_setup() since that one does a kfifo alloc + a pollfunc alloc. So, this should have a more familiar ring to what it is. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-3-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11media: v4l2-subdev.rst: typo fixTomi Valkeinen1-1/+1
Fix a typo in the text. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-03-10docs/pinctrl: document debugfs filesDrew Fustini1-0/+37
Document debugfs directories and files created for pinctrl subsystem. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20210302053059.1049035-5-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-10Documentation: rename pinctl to pin-controlDrew Fustini3-2/+2
pinctl is not ideal as pinctrl (with an 'r') is much more common. Linus state that pin-control.rst would be the best name for the documentation. Link: https://lore.kernel.org/linux-gpio/20210126050817.GA187797@x1/#t Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Drew Fustini <drew@beagleboard.org> Link: https://lore.kernel.org/r/20210302053059.1049035-4-drew@beagleboard.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-10tty: rocket, remove the driverJiri Slaby1-185/+0
While the driver is still marked as maintained in MAINTAINERS, Comtrol does not really care about this ancient driver. They are still manufacturing serial devices, but those are controlled only by out-of-tree drivers. Comtrol didn't answer my pings, so this driver is apparently unmaintained. Aside from that, the driver was untouched for years, only whole-tree changes happened during the past years. The driver needs much more care, so drop it for now. If someone steps up to reintroduce it, they need to clean it up first. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: cyclades, remove this orphanJiri Slaby2-12/+0
The Cyclades driver was orphaned by commit d459883e6c54 (MAINTAINERS: remove two dead e-mail) 13 years ago. Noone stepped up to take care of them and to fix all the issues the driver has. On the top of that, there is no way to obtain the firmware for Z cards from the vendor as cyclades.com ceased to exist. So it's time to drop the driver with all its traces. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-08docs: driver-model: device: Add ATTRIBUTE_GROUPS() exampleGeert Uytterhoeven1-4/+9
Add a paragraph about the ATTRIBUTE_GROUPS() helper macro, and use it in the example. Retain the old description, as it is still useful in case of multiple groups. Change the names of the group(s) structures, to match the ATTRIBUTE_GROUPS() macro. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210303133845.3939403-3-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08docs: driver-model: device: Add DEVICE_ATTR_{RO,RW} examplesGeert Uytterhoeven1-2/+8
bus.rst, driver.rst, and hwmon-kernel-api.rst refer to the DEVICE_ATTR_* macros for devices, but device.rst does not mention them. Add a paragraph about these helper macros, and use them in the examples. Retain the old description, as it is still useful for less common values of mode. Change the names of the example "show" and "store" methods, to match the expectations of the DEVICE_ATTR_* macros. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210303133845.3939403-2-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-08platform/surface: aggregator: Make SSAM_DEFINE_SYNC_REQUEST_x define static functionsMaximilian Luz1-2/+2
The SSAM_DEFINE_SYNC_REQUEST_x() macros are intended to reduce boiler-plate code for SSAM request definitions by defining a wrapper function for the specified request. The client device variants of those macros, i.e. SSAM_DEFINE_SYNC_REQUEST_CL_x() in particular rely on the multi-device (MD) variants, e.g.: #define SSAM_DEFINE_SYNC_REQUEST_CL_R(name, rtype, spec...) \ SSAM_DEFINE_SYNC_REQUEST_MD_R(__raw_##name, rtype, spec) \ int name(struct ssam_device *sdev, rtype *ret) \ { \ return __raw_##name(sdev->ctrl, sdev->uid.target, \ sdev->uid.instance, ret); \ } This now creates the problem that it is not possible to declare the generated functions static via static SSAM_DEFINE_SYNC_REQUEST_CL_R(...) as this will only apply to the function defined by the multi-device macro, i.e. SSAM_DEFINE_SYNC_REQUEST_MD_R(). Thus compiling with `-Wmissing-prototypes' rightfully complains that there is a 'static' keyword missing. To solve this, make all SSAM_DEFINE_SYNC_REQUEST_x() macros define static functions. Non-client-device macros are also changed for consistency. In general, we expect those functions to be only used locally in the respective drivers for the corresponding interfaces, so having to define a wrapper function to be able to export this should be the odd case out. Reported-by: kernel test robot <lkp@intel.com> Fixes: b78b4982d763 ("platform/surface: Add platform profile driver") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20210304190524.1172197-1-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-03-06docs: driver-model: Remove obsolete device class documentationGeert Uytterhoeven2-150/+0
None of this is valid since v2.5.69. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210225091124.686078-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-03-01firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)Nobuhiro Iwamatsu1-29/+2
zynqmp_pm_get_eemi_ops() was removed in commit 4db8180ffe7c: "Firmware: xilinx: Remove eemi ops for fpga related APIs", but not in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE). Any driver who want to communicate with PMC using EEMI APIs use the functions provided for each function This removed zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE), and also modify the documentation for this driver. Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs") Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Link: https://lore.kernel.org/r/20210215155849.2425846-1-iwamatsu@nigauri.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-02-24Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds2-109/+0
Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...
2021-02-24Merge tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds3-0/+59
Pull initial support for CXL (Compute Express Link) from Dan Williams: "Introduce an initial driver for CXL 2.0 Type-3 Memory Devices. CXL is Compute Express Link which released the 2.0 specification in November. The Linux relevant changes in CXL 2.0 are support for an OS to dynamically assign address space to memory devices, support for switches, persistent memory, and hotplug. A Type-3 Memory Device is a PCI enumerated device presenting the CXL Memory Device Class Code and implementing the CXL.mem protocol. CXL.mem allows device to advertise CPU and I/O coherent memory to the system, i.e. typical "System RAM" and "Persistent Memory" in Linux /proc/iomem terms. In addition to the CXL.mem fast path there is an administrative command hardware mailbox interface for maintenance and provisioning. It is this command interface that is the focus of the initial driver. With this driver a CXL device that is mapped by the BIOS can be administered by Linux. Linux support for CXL PMEM and dynamic CXL address space management are to be implemented post v5.12" Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> 4cdadfd5e0a7 ("cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints") 13237183c735 ("cxl/mem: Add a "RAW" send command") 472b1ce6e9d6 ("cxl/mem: Enable commands via CEL") 57ee605b976c ("cxl/mem: Add set of informational commands") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 8adaf747c9f0 ("cxl/mem: Find device capabilities") b39cb1052a5c ("cxl/mem: Register CXL memX devices") * tag 'cxl-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/mem: Fix potential memory leak cxl/mem: Return -EFAULT if copy_to_user() fails MAINTAINERS: Add maintainers of the CXL driver cxl/mem: Add set of informational commands cxl/mem: Enable commands via CEL cxl/mem: Add a "RAW" send command cxl/mem: Add basic IOCTL interface cxl/mem: Register CXL memX devices cxl/mem: Find device capabilities cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints
2021-02-22Merge tag 'docs-5.12' of git://git.lwn.net/linuxLinus Torvalds3-5/+17
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle in docsland. - As promised, the minimum Sphinx version to build the docs is now 1.7, and we have dropped support for Python 2 entirely. That allowed the removal of a bunch of compatibility code. - A set of treewide warning fixups from Mauro that I applied after it became clear nobody else was going to deal with them. - The automarkup mechanism can now create cross-references from relative paths to RST files. - More translations, typo fixes, and warning fixes" * tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits) docs: kernel-hacking: be more civil docs: Remove the Microsoft rhetoric Documentation/admin-guide: kernel-parameters: Update nohlt section doc/admin-guide: fix spelling mistake: "perfomance" -> "performance" docs: Document cross-referencing using relative path docs: Enable usage of relative paths to docs on automarkup docs: thermal: fix spelling mistakes Documentation: admin-guide: Update kvm/xen config option docs: Make syscalls' helpers naming consistent coding-style.rst: Avoid comma statements Documentation: /proc/loadavg: add 3 more field descriptions Documentation/submitting-patches: Add blurb about backtraces in commit messages Docs: drop Python 2 support Move our minimum Sphinx version to 1.7 Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams scripts/kernel-doc: add internal hyperlink to DOC: sections Update Documentation/admin-guide/sysctl/fs.rst docs: Update DTB format references docs: zh_CN: add iio index.rst translation docs/zh_CN: add iio ep93xx_adc.rst translation ...
2021-02-22Merge tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds2-6/+7
Pull gpio updates from Bartosz Golaszewski: "It's been a relatively calm release cycle and we're actually removing more code than we're adding. Summary: - new driver for the Toshiba Visconti platform - rework of interrupt handling in gpio-tegra - updates for GPIO selftests: we're now using the character device to perform the subsystem checks - support for a new rcar variant + some code refactoring - refactoring of gpio-ep93xx - SPDX License identifier has been updated in the uapi header so that userspace programs bundling it can become fully REUSE-compliant - improvements to pwm handling in gpio-mvebu - support for interrupt handling and power management for gpio-xilinx as well as some code refactoring - support for a new chip variant in gpio-pca953x - removal of drivers: zte xs & intel-mid and removal of leftovers from intel-msic - impovements to intel drivers pulled from Andy Shevchenko - improvements to the gpio-aggregator virtual GPIO driver - and several minor tweaks and fixes to code and documentation all over the place" * tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits) gpio: pcf857x: Fix missing first interrupt gpio: ep93xx: refactor base IRQ number gpio: ep93xx: refactor ep93xx_gpio_add_bank gpio: ep93xx: Fix typo s/hierarchial/hierarchical gpio: ep93xx: drop to_irq binding gpio: ep93xx: Fix wrong irq numbers in port F gpio: uapi: use the preferred SPDX license identifier gpio: gpio-xilinx: Add check if width exceeds 32 gpio: gpio-xilinx: Add support for suspend and resume gpio: gpio-xilinx: Add interrupt support gpio: gpio-xilinx: Reduce spinlock array to array gpio: gpio-xilinx: Simplify with dev_err_probe() gpio: msic: Drop driver from Makefile gpio: wcove: Split out to_ireg() helper and deduplicate the code gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits() gpio: wcove: Get rid of error prone casting in IRQ handler gpio: intel-mid: Remove driver for deprecated platform gpio: msic: Remove driver for deprecated platform gpio: aggregator: Remove trailing comma in terminator entries gpio: aggregator: Use compound literal from the header ...
2021-02-22Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linuxLinus Torvalds1-13/+0
Pull thermal updates from Daniel Lezcano: - Use the newly introduced 'hot' and 'critical' ops for the acpi thermal driver (Daniel Lezcano) - Remove the notify ops as it is no longer used (Daniel Lezcano) - Remove the 'forced passive' option and the unused bind/unbind functions (Daniel Lezcano) - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro (Daniel Lezcano) - Rework the delays to make them pre-computed instead of computing them again and again at each polling interval (Daniel Lezcano) - Remove the pointless 'thermal_zone_device_reset' function (Daniel Lezcano) - Use the critical and hot ops to prevent an unexpected system shutdown on int340x (Kai-Heng Feng) - Make the cooling device state private to the thermal subsystem (Daniel Lezcano) - Prevent to use not-power-aware actor devices with the power allocator governor (Lukasz Luba) - Remove 'zx' and 'tango' support along with the corresponding platforms (Arnd Bergman) - Fix several issues on the Omap thermal driver (Tony Lindgren) - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms (Dmitry Baryshkov) - Fix an initialization loop in the adc-tm5 (Colin Ian King) - Fix a return error check in the cpufreq cooling device (Viresh Kumar) * tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error thermal: qcom: Fix comparison with uninitialized variable channels_available thermal: qcom: add support for adc-tm5 PMIC thermal monitor dt-bindings: thermal: qcom: add adc-thermal monitor bindings thermal: ti-soc-thermal: Use non-inverted define for omap4 thermal: ti-soc-thermal: Simplify polling with iopoll thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430 thermal: ti-soc-thermal: Skip pointless register access for dra7 thermal/drivers/zx: Remove zx driver thermal/drivers/tango: Remove tango driver thermal: power allocator: fail binding for non-power actor devices thermal/core: Make cooling device state change private thermal: intel: pch: Fix unexpected shutdown at critical temperature thermal: int340x: Fix unexpected shutdown at critical temperature thermal/core: Remove pointless thermal_zone_device_reset() function thermal/core: Remove ms based delay fields thermal/core: Use precomputed jiffies for the polling thermal/core: Precompute the delays from msecs to jiffies thermal/core: Remove unused macro THERMAL_TRIPS_NONE thermal/core: Remove THERMAL_TRIPS_NONE test ...
2021-02-22Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86Linus Torvalds11-0/+1670
Pull x86 platform driver updates from Hans de Goede: "Highlights: - Microsoft Surface devices System Aggregator Module support - SW_TABLET_MODE reporting improvements - thinkpad_acpi keyboard language setting support - platform / DPTF profile settings support: - Base / userspace API parts merged from Rafael's acpi-platform branch - thinkpad_acpi and ideapad-laptop support through pdx86 - Remove support for some obsolete Intel MID platforms through merging of the shared intel-mid-removal branch - Big cleanup of the ideapad-laptop driver - Misc other fixes / new hw support / quirks" * tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits) platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds platform/surface: aggregator: Fix access of unaligned value tools/power/x86/intel-speed-select: Update version to 1.8 tools/power/x86/intel-speed-select: Add new command to get/set TRL tools/power/x86/intel-speed-select: Add new command turbo-mode Platform: OLPC: Constify static struct regulator_ops platform/surface: Add Surface Hot-Plug driver platform/x86: intel_scu_wdt: Drop mistakenly added const platform/x86: Kconfig: add missing selects for ideapad-laptop platform/x86: acer-wmi: Don't use ACPI_EXCEPTION() platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning platform/x86: Move all dell drivers to their own subdirectory Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths platform/x86: ideapad-laptop: add "always on USB charging" control support platform/x86: ideapad-laptop: add keyboard backlight control support platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs ...
2021-02-21Merge tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds7-53/+81
Pull media updates from Mauro Carvalho Chehab: - some core fixes in VB2 mem2mem support - some improvements and cleanups in V4L2 async kAPI - newer controls in V4L2 API for H-264 and HEVC codecs - allegro-dvt driver was promoted from staging - new i2c sendor drivers: imx334, ov5648, ov8865 - new automobile camera module: rdacm21 - ipu3 cio2 driver started gained support for some ACPI BIOSes - new ATSC frontend: MaxLinear mxl692 VSB tuner/demod - the SMIA/CCS driver gained more support for CSS standard - several driver fixes, updates and improvements * tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits) media: v4l: async: Fix kerneldoc documentation for async functions media: i2c: max9271: Add MODULE_* macros media: i2c: Kconfig: Make MAX9271 a module media: imx334: 'ret' is uninitialized, should have been PTR_ERR() media: i2c: Add imx334 camera sensor driver media: dt-bindings: media: Add bindings for imx334 media: ov8856: Configure sensor for GRBG Bayer for all modes media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control media: ov5675: fix vflip/hflip control media: ipu3-cio2: Build bridge only if ACPI is enabled media: Remove the legacy v4l2-clk API media: ov6650: Use the generic clock framework media: mt9m111: Use the generic clock framework media: ov9640: Use the generic clock framework media: pxa_camera: Drop the v4l2-clk clock register media: mach-pxa: Register the camera sensor fixed-rate clock media: i2c: imx258: get clock from device properties and enable it via runtime PM media: i2c: imx258: simplify getting state container media: i2c: imx258: add support for binding via device tree media: dt-bindings: media: imx258: add bindings for IMX258 sensor ...
2021-02-16cxl/mem: Add basic IOCTL interfaceBen Widawsky1-0/+12
Add a straightforward IOCTL that provides a mechanism for userspace to query the supported memory device commands. CXL commands as they appear to userspace are described as part of the UAPI kerneldoc. The command list returned via this IOCTL will contain the full set of commands that the driver supports, however, some of those commands may not be available for use by userspace. Memory device commands first appear in the CXL 2.0 specification. They are submitted through a mailbox mechanism specified in the CXL 2.0 specification. The send command allows userspace to issue mailbox commands directly to the hardware. The list of available commands to send are the output of the query command. The driver verifies basic properties of the command and possibly inspect the input (or output) payload to determine whether or not the command is allowed (or might taint the kernel). Reported-by: kernel test robot <lkp@intel.com> # bug in earlier revision Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20210217040958.1354670-5-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-16cxl/mem: Register CXL memX devicesDan Williams1-0/+5
Create the /sys/bus/cxl hierarchy to enumerate: * Memory Devices (per-endpoint control devices) * Memory Address Space Devices (platform address ranges with interleaving, performance, and persistence attributes) * Memory Regions (active provisioned memory from an address space device that is in use as System RAM or delegated to libnvdimm as Persistent Memory regions). For now, only the per-endpoint control devices are registered on the 'cxl' bus. However, going forward it will provide a mechanism to coordinate cross-device interleave. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v2) Link: https://lore.kernel.org/r/20210217040958.1354670-4-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-16cxl/mem: Find device capabilitiesBen Widawsky1-0/+14
Provide enough functionality to utilize the mailbox of a memory device. The mailbox is used to interact with the firmware running on the memory device. The flow is proven with one implemented command, "identify". Because the class code has already told the driver this is a memory device and the identify command is mandatory. CXL devices contain an array of capabilities that describe the interactions software can have with the device or firmware running on the device. A CXL compliant device must implement the device status and the mailbox capability. Additionally, a CXL compliant memory device must implement the memory device capability. Each of the capabilities can [will] provide an offset within the MMIO region for interacting with the CXL device. The capabilities tell the driver how to find and map the register space for CXL Memory Devices. The registers are required to utilize the CXL spec defined mailbox interface. The spec outlines two mailboxes, primary and secondary. The secondary mailbox is earmarked for system firmware, and not handled in this driver. Primary mailboxes are capable of generating an interrupt when submitting a background command. That implementation is saved for a later time. Reported-by: Colin Ian King <colin.king@canonical.com> (coverity) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> (smatch) Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2) Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-3-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-16cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpointsDan Williams3-0/+28
The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: David Rientjes <rientjes@google.com> (v1) Cc: Jonathan Corbet <corbet@lwn.net> Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-02-15docs: gpio: intro: Improve HTML formattingJonathan Neuschäfer1-4/+4
Currently the HTML output for Documentation/driver-api/gpio/intro.rst doesn't look right. The lines that start with LOW or HIGH are formatted in bold, while the next line after each is not bold. With this patch, the HTML looks better. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15docs: gpio: Fix formatting in description of gpiod_*_array_* functionsJonathan Neuschäfer1-2/+3
The gpiod_*_array_* functions take four arguments, not three. Additionally, the formatting of the "value_bitmap" line results in misformatted HTML, so fix that. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-06media: Remove the legacy v4l2-clk APIEzequiel Garcia2-32/+0
The V4L2 temporary clock helper API, was introduced in late 2012 and, as mentioned in the documentation, meant to be replaced by the generic clock API, once the generic clock framework became available on all relevant architectures. The generic clock API is a well-established API (since a few years now). The last few media capture drivers and sensors using v4l2-clk have been converted to the generic clock framework. We can now remove the v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: Clarify v4l2-async subdevice addition APIEzequiel Garcia1-9/+39
Now that most users of v4l2_async_notifier_add_subdev have been converted, let's fix the documentation so it's more clear how the v4l2-async API should be used. Document functions that drivers should use, and their purpose. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-04docs: thermal: fix spelling mistakesFlavio Suligoi1-3/+3
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210129132035.16967-1-f.suligoi@asem.it Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-01-29misc: pti: Remove a leftover in documentationAndy Shevchenko1-1/+0
Driver is gone, so is the documentation. Remove a leftover in documentation. Fixes: 8ba59e9dee31 ("misc: pti: Remove driver for deprecated platform") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210129112729.65363-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27media: hdmi: cec: replace broken link to HDMI specsivan tkachenko1-1/+1
Current link died, according to Wayback Machine, back in 2017. And the website is completely down since 2019. Moreover, there was a custom cover on that PDF, i.e. it was modified. According to HDMI licence agreement (LA), HDMI specification and technical information are supposed to be hosted on www.hdmi.org exclusively, and not redistributed by third-parties. Sure, there are still many more or less reliable "mirrors" out there with a direct download straight from a search engine's page. However, for example, from FPGA4fun[1] website it was removed "per HDMI LA request". Unfortunately, the official download page is protected by email CAPTCHA, but that seems to be the only legit way to obtain a copy. [1] https://www.fpga4fun.com/HDMI.html Signed-off-by: ivan tkachenko <me@ratijas.tk> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-27misc: pti: Remove driver for deprecated platformAndy Shevchenko1-108/+0
Intel Moorestown and Medfield are quite old Intel Atom based 32-bit platforms, which were in limited use in some Android phones, tablets and consumer electronics more than eight years ago. There are no bugs or problems ever reported outside from Intel for breaking any of that platforms for years. It seems no real users exists who run more or less fresh kernel on it. The commit 05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align with this theory. Due to above and to reduce a burden of supporting outdated drivers we remove the support of outdated platforms completely. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26media: Documentation: media: Fix recently introduced build warning in subdev docsSakari Ailus1-1/+1
A reference to the sub-device pad ops was not follwed by a whitespace, resulting in a warning during documentation build. Fix it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 25c8d9a7689e ("media: Documentation: v4l: Document that link_validate op is valid for sink only") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-22devlink: Extend devlink port documentation for subfunctionsParav Pandit1-0/+2
Add devlink port documentation for subfunction management. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-19thermal/core: Remove the 'forced_passive' optionDaniel Lezcano1-13/+0
The code was reorganized in 2012 with the commit 0c01ebbfd3caf1. The main change is a loop on the trip points array and a unconditional call to the throttle() ops of the governors for each of them even if the trip temperature is not reached yet. With this change, the 'forced_passive' is no longer checked in the thermal_zone_device_update() function but in the step wise governor's throttle() callback. As the force_passive does no belong to the trip point array, the thermal_zone_device_update() can not compare with the specified passive temperature, thus does not detect the passive limit has been crossed. Consequently, throttle() is never called and the 'forced_passive' branch is unreached. In addition, the default processor cooling device is not automatically bound to the thermal zone if there is not passive trip point, thus the 'forced_passive' can not operate. If there is an active trip point, then the throttle function will be called to mitigate at this temperature and the 'forced_passive' will override the mitigation of the active trip point in this case but with the default cooling device bound to the thermal zone, so usually a fan, and that is not a passive cooling effect. Given the regression exists since more than 8 years, nobody complained and at the best of my knowledge there is no bug open in https://bugzilla.kernel.org, it is reasonable to say it is unused. Remove the 'forced_passive' related code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20201214233811.485669-1-daniel.lezcano@linaro.org
2021-01-12media: Documentation: Include CCS PLL calculator to CCS driver documentationSakari Ailus1-0/+13
Include existing CCS PLL calculator kerneldoc documentation to the documentation build. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: Documentation: media: Document clock handling in camera sensor driversSakari Ailus1-1/+19
Document pratices of handling clocks in camera sensor drivers on both DT and ACPI. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: Documentation: media: Update pixel rate formula for C-PHYSakari Ailus1-1/+3
Update the formula to calculate the pixel rate on the link for C-PHY. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: Documentation: v4l: Document that link_validate op is valid for sink onlySakari Ailus1-5/+6
The link_validate pad op will only be called on sink pads. Document this. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-12media: Documentation: v4l: Remove reference to video opsSakari Ailus1-4/+0
We no longer have format related callbacks in video ops. Remove the reference to them. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-11Documentation: document dma device use for mcbJohannes Thumshirn1-0/+12
Hannes reported a problem with setting up dma transfers on a mcb device. The problem boiled down to the use of a wrong 'device' for the dma functions. Document how to setup dma transfers for a IP core on a mcb carrier. Reported-by: Hannes Duerr <Hannes.Duerr@duagon.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/3bdc8f76b30c2b0e2a2bfab06c2e73797ddc9384.1608305690.git.johannes.thumshirn@wdc.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-01-11Documentation: Replace lkml.org links with loreJoe Perches1-2/+2
Replace the lkml.org links with lore to better use a single source that's more likely to stay available long-term. Done by bash script: cvt_lkml_to_lore () { tmpfile=$(mktemp ./.cvt_links.XXXXXXX) header=$(echo $1 | sed 's@/lkml/@/lkml/headers/@') wget -qO - $header > $tmpfile if [[ $? == 0 ]] ; then link=$(grep -i '^Message-Id:' $tmpfile | head -1 | \ sed -r -e 's/^\s*Message-Id:\s*<\s*//' -e 's/\s*>\s*$//' -e 's@^@https://lore.kernel.org/r/@') # echo "testlink: $link" if [ -n "$link" ] ; then wget -qO - $link > /dev/null if [[ $? == 0 ]] ; then echo $link fi fi fi rm -f $tmpfile } git grep -P -o "\bhttps?://(?:www.)?lkml.org/lkml[\/\w]+" $@ | while read line ; do echo $line file=$(echo $line | cut -f1 -d':') link=$(echo $line | cut -f2- -d':') newlink=$(cvt_lkml_to_lore $link) if [[ -n "$newlink" ]] ; then sed -i -e "s#\b$link\b#$newlink#" $file fi done Link: https://lore.kernel.org/patchwork/patch/1265849/#1462688 Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/77cdb7f32cfb087955bfc3600b86c40bed5d4104.camel@perches.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-01-07platform/surface: Add Surface ACPI Notify driverMaximilian Luz2-0/+45
The Surface ACPI Notify (SAN) device provides an ACPI interface to the Surface Aggregator EC, specifically the Surface Serial Hub interface. This interface allows EC requests to be made from ACPI code and can convert a subset of EC events back to ACPI notifications. Specifically, this interface provides a GenericSerialBus operation region ACPI code can execute a request by writing the request command data and payload to this operation region and reading back the corresponding response via a write-then-read operation. Furthermore, this interface provides a _DSM method to be called when certain events from the EC have been received, essentially turning them into ACPI notifications. The driver provided in this commit essentially takes care of translating the request data written to the operation region, executing the request, waiting for it to finish, and finally writing and translating back the response (if the request has one). Furthermore, this driver takes care of enabling the events handled via ACPI _DSM calls. Lastly, this driver also exposes an interface providing discrete GPU (dGPU) power-on notifications on the Surface Book 2, which are also received via the operation region interface (but not handled by the SAN driver directly), making them accessible to other drivers (such as a dGPU hot-plug driver that may be added later on). On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6, Book 2, Laptop 1 and 2), the SAN interface provides full battery and thermal subsystem access, as well as other EC based functionality. On those models, battery and thermal sensor devices are implemented as standard ACPI devices of that type, however, forward ACPI calls to the corresponding Surface Aggregator EC request via the SAN interface and receive corresponding notifications (e.g. battery information change) from it. This interface is therefore required to provide said functionality on those devices. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201221183959.1186143-10-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-07platform/surface: Add Surface Aggregator user-space interfaceMaximilian Luz2-1/+98
Add a misc-device providing user-space access to the Surface Aggregator EC, mainly intended for debugging, testing, and reverse-engineering. This interface gives user-space applications the ability to send requests to the EC and receive the corresponding responses. The device-file is managed by a pseudo platform-device and corresponding driver to avoid dependence on the dedicated bus, allowing it to be loaded in a minimal configuration. A python library and scripts to access this device can be found at [1]. [1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20201221183959.1186143-9-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-07docs: driver-api: Add Surface Aggregator subsystem documentationMaximilian Luz9-0/+1528
Add documentation for the Surface Aggregator subsystem and its client drivers, giving an overview of the subsystem, its use-cases, its internal structure and internal API, as well as its external API for writing client drivers. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201221183959.1186143-8-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-12-20Merge tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds1-0/+6
Pull RTC updates from Alexandre Belloni: "Subsystem: - Remove nvram ABI. There was no complaints about the deprecation for the last 3 years. - Improve RTC device allocation and registration - Now available for ARCH=um Drivers: - at91rm9200: correction and sam9x60 support - ds1307: improve ACPI support - mxc: now DT only - pcf2127: watchdog support now needs the reset-source property - pcf8523: set range - rx6110: i2c support" * tag 'rtc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (43 commits) rtc: pcf2127: only use watchdog when explicitly available dt-bindings: rtc: add reset-source property rtc: fix RTC removal rtc: s3c: Remove dead code related to periodic tick handling rtc: s3c: Disable all enable (RTC, tick) bits in the probe rtc: ep93xx: Fix NULL pointer dereference in ep93xx_rtc_read_time rtc: test: remove debug message rtc: mxc{,_v2}: enable COMPILE_TEST rtc: enable RTC framework on ARCH=um rtc: pcf8523: use BIT rtc: pcf8523: set range rtc: pcf8523: switch to devm_rtc_allocate_device rtc: destroy mutex when releasing the device rtc: shrink devm_rtc_allocate_device() rtc: rework rtc_register_device() resource management rtc: nvmem: emit an error message when nvmem registration fails rtc: add devm_ prefix to rtc_nvmem_register() rtc: nvmem: remove nvram ABI Documentation: list RTC devres helpers in devres.rst rtc: omap: use devm_pinctrl_register() ...
2020-12-18Merge tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull more drm updates from Daniel Vetter: "UAPI Changes: - Only enable char/agp uapi when CONFIG_DRM_LEGACY is set Cross-subsystem Changes: - vma_set_file helper to make vma->vm_file changing less brittle, acked by Andrew Core Changes: - dma-buf heaps improvements - pass full atomic modeset state to driver callbacks - shmem helpers: cached bo by default - cleanups for fbdev, fb-helpers - better docs for drm modes and SCALING_FITLER uapi - ttm: fix dma32 page pool regression Driver Changes: - multi-hop regression fixes for amdgpu, radeon, nouveau - lots of small amdgpu hw enabling fixes (display, pm, ...) - fixes for imx, mcde, meson, some panels, virtio, qxl, i915, all fairly minor - some cleanups for legacy drm/fbdev drivers" * tag 'drm-next-2020-12-18' of git://anongit.freedesktop.org/drm/drm: (117 commits) drm/qxl: don't allocate a dma_address array drm/nouveau: fix multihop when move doesn't work. drm/i915/tgl: Fix REVID macros for TGL to fetch correct stepping drm/i915: Fix mismatch between misplaced vma check and vma insert drm/i915/perf: also include Gen11 in OATAILPTR workaround Revert "drm/i915: re-order if/else ladder for hpd_irq_setup" drm/amdgpu/disply: fix documentation warnings in display manager drm/amdgpu: print mmhub client name for dimgrey_cavefish drm/amdgpu: set mode1 reset as default for dimgrey_cavefish drm/amd/display: Add get_dig_frontend implementation for DCEx drm/radeon: remove h from printk format specifier drm/amdgpu: remove h from printk format specifier drm/amdgpu: Fix spelling mistake "Heterogenous" -> "Heterogeneous" drm/amdgpu: fix regression in vbios reservation handling on headless drm/amdgpu/SRIOV: Extend VF reset request wait period drm/amdkfd: correct amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu log. drm/amd/display: Adding prototype for dccg21_update_dpp_dto() drm/amdgpu: print what method we are using for runtime pm drm/amdgpu: simplify logic in atpx resume handling drm/amdgpu: no need to call pci_ignore_hotplug for _PR3 ...
2020-12-17Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds2-31/+54
Pull GPIO updates from Linus Walleij: "This is the bulk of the GPIO changes for the v5.11 kernel cycle: Core changes: - Retired the old set-up function for GPIO IRQ chips. All chips now use the template struct gpio_irq_chip and pass that to the core to be set up alongside the gpio_chip. We can finally get rid of the old cruft. - Some refactoring and clean up of the core code. - Support edge event timestamps to be stamped using REALTIME (wall clock) timestamps. We have found solid use cases for this, so we support it. New drivers: - MStar MSC313 GPIO driver. - HiSilicon GPIO driver. Driver improvements: - The PCA953x driver now also supports the NXP PCAL9554B/C chips. - The mockup driver can now be probed from the device tree which is pretty useful for virtual prototyping of devices. - The Rcar driver now supports .get_multiple() - The MXC driver dropped some legacy and became a pure device tree client. - The Exar driver was moved over to the IDA interface for enumerating, and also switched over to using regmap for register access" * tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) MAINTAINERS: Remove reference to non-existing file gpio: hisi: Do not require ACPI for COMPILE_TEST MAINTAINERS: Add maintainer for HiSilicon GPIO driver gpio: gpio-hisi: Add HiSilicon GPIO support gpio: cs5535: Simplify the return expression of cs5535_gpio_probe() gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask dt-bindings: mt7621-gpio: convert bindings to YAML format gpiolib: cdev: Flag invalid GPIOs as used gpio: put virtual gpio device into their own submenu drivers: gpio: amd8111: use SPDX-License-Identifier drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk gpio: Add TODO item for debugfs interface gpio: just plain warning when nonexisting gpio requested tools: gpio: add option to report wall-clock time to gpio-event-mon tools: gpio: add support for reporting realtime event clock to lsgpio gpiolib: cdev: allow edge event timestamps to be configured as REALTIME gpio: msc313: MStar MSC313 GPIO driver dt-bindings: gpio: Binding for MStar MSC313 GPIO controller dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver ...
2020-12-17Merge tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-1/+1
Pull networking fixes from Jakub Kicinski: "Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug" * tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net/sched: sch_taprio: reset child qdiscs before freeing them nfp: move indirect block cleanup to flower app stop callback octeontx2-af: Fix undetected unmap PF error check net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments" qlcnic: Fix error code in probe mptcp: fix pending data accounting mptcp: push pending frames when subflow has free space mptcp: properly annotate nested lock mptcp: fix security context on server socket net/mlx5: Fix compilation warning for 32-bit platform mptcp: clear use_ack and use_map when dropping other suboptions devlink: use _BITUL() macro instead of BIT() in the UAPI header net: korina: fix return value net/smc: fix access to parent of an ib device ethtool: fix error paths in ethnl_set_channels() nfc: s3fwrn5: Remove unused NCI prop commands nfc: s3fwrn5: Remove the delay for NFC sleep phy: fix kdoc warning tipc: do sanity check payload of a netlink message use __netdev_notify_peers in hyperv ...
2020-12-17Merge tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds1-1/+3
Pull dmaengine updates from Vinod Koul: "The last dmaengine updates for this year :) This contains couple of new drivers, new device support and updates to bunch of drivers. New drivers/devices: - Qualcomm ADM driver - Qualcomm GPI driver - Allwinner A100 DMA support - Microchip Sama7g5 support - Mediatek MT8516 apdma Updates: - more updates to idxd driver and support for IAX config - runtime PM support for dw driver - TI drivers" * tag 'dmaengine-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (75 commits) soc: ti: k3-ringacc: Use correct error casting in k3_ringacc_dmarings_init dmaengine: ti: k3-udma-glue: Add support for K3 PKTDMA dmaengine: ti: k3-udma: Initial support for K3 PKTDMA dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling dmaengine: ti: k3-udma: Initial support for K3 BCDMA soc: ti: k3-ringacc: add AM64 DMA rings support. dmaengine: ti: Add support for k3 event routers dmaengine: ti: k3-psil: Add initial map for AM64 dmaengine: ti: k3-psil: Extend psil_endpoint_config for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 PKTDMA dt-bindings: dma: ti: Add document for K3 BCDMA dmaengine: dmatest: Use dmaengine_get_dma_device dmaengine: doc: client: Update for dmaengine_get_dma_device() usage dmaengine: Add support for per channel coherency handling dmaengine: of-dma: Add support for optional router configuration callback dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings dmaengine: ti: k3-udma-glue: Get the ringacc from udma_dev dmaengine: ti: k3-udma-glue: Add function to get device pointer for DMA API dmaengine: ti: k3-udma: Add support for second resource range from sysfw dmaengine: ti: k3-udma: Wait for peer teardown completion if supported ...
2020-12-16Merge tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds2-4/+1
Pull MTD updates from Miquel Raynal: "MTD core: - Fix refcounting for unpartitioned MTDs - Fix misspelled function parameter 'section' - Remove unneeded break - cmdline parser: Fix parsing of part-names with colons - mtdpart: Fix misdocumented function parameter 'mtd' MTD devices: - phram: - Allow the user to set the erase page size - File headers are not good candidates for kernel-doc - physmap-bt1-rom: Fix __iomem addrspace removal warning - plat-ram: correctly free memory on error path in platram_probe() - powernv_flash: Add function names to headers and fix 'dev' - docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues UBI cleanup fixes: - gluebi: Fix misnamed function parameter documentation - wl: Fix a couple of kernel-doc issues - eba: Fix a couple of misdocumentation issues - kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter - Document 'ubi_num' in struct mtd_dev_param Generic NAND core ECC management: - Add an I/O request tweaking mechanism - Entire rework of the software BCH ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, migration to more generic prototypes, misc fixes and style cleanup. Moved now to the Generic NAND layer. - Entire rework of the software Hamming ECC driver, creation of a real ECC engine, getting rid of raw NAND structures, misc renames, comment updates, cleanup, and style fixes. Moved now to the generic NAND layer. - Necessary plumbing at the NAND level to retrieve generic NAND ECC engines (softwares and on-die). - Update of the bindings. Raw NAND core: - Geting rid of the chip->ecc.priv entry. - Fix miscellaneous typos in kernel-doc Raw NAND controller drivers: - Arasan: Document 'anfc_op's 'buf' member - AU1550: Ensure the presence of the right includes - Brcmnand: Demote non-conformant kernel-doc headers - Cafe: Remove superfluous param doc and add another - Davinci: Do not use extra dereferencing - Diskonchip: Marking unused variables as __always_unused - GPMI: - Fix the driver only sense CS0 R/B issue - Fix the random DMA timeout issue - Use a single line for of_device_id - Use of_device_get_match_data() - Fix reference count leak in gpmi ops - Cleanup makefile - Fix binding matching of clocks on different SoCs - Ingenic: remove redundant get_device() in ingenic_ecc_get() - Intel LGM: New NAND controller driver - Marvell: Drop useless line - Meson: - Fix a resource leak in init - Fix meson_nfc_dma_buffer_release() arguments - mxc: - Use device_get_match_data() - Use a single line for of_device_id - Remove platform data support - Omap: - Fix a bunch of kernel-doc misdemeanours - Finish ELM half populated function header, demote empty ones - s3c2410: Add documentation for 2 missing struct members - Sunxi: Document 'sunxi_nfc's 'caps' member - Qcom: - Add support for SDX55 - Support for IPQ6018 QPIC NAND controller - Fix DMA sync on FLASH_STATUS register read - Rockchip: New NAND controller driver for RK3308, RK2928 and others - Sunxi: Add MDMA support ONENAND: - bbt: Fix expected kernel-doc formatting - Fix some kernel-doc misdemeanours - Fix expected kernel-doc formatting - Use mtd->oops_panic_write as condition SPI-NAND core: - Creation of a SPI-NAND on-die ECC engine - Move ECC related definitions earlier in the driver - Fix typo in comment - Fill a default ECC provider/algorithm - Remove outdated comment - Fix OOB read - Allow the case where there is no ECC engine - Use the external ECC engine logic SPI-NAND chip drivers: - Micron: - Add support for MT29F2G01AAAED - Use more specific names - Macronix: - Add support for MX35LFxG24AD - Add support for MX35LFxGE4AD - Toshiba: Demote non-conformant kernel-doc header SPI-NOR core: - Initial support for stateful Octal DTR mode using volatile settings - Preliminary support for JEDEC 251 (xSPI) and JEDEC 216D standards - Support for Cypress Semper flash - Support to specify ECC block size of SPI NOR flashes - Fixes to avoid clearing of non-volatile Block Protection bits at probe - hisi-sfc: Demote non-conformant kernel-doc" * tag 'mtd/for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits) mtd: spinand: macronix: Add support for MX35LFxG24AD mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others dt-bindings: mtd: Describe Rockchip RK3xxx NAND flash controller mtd: rawnand: gpmi: Use a single line for of_device_id mtd: rawnand: gpmi: Fix the random DMA timeout issue mtd: rawnand: gpmi: Fix the driver only sense CS0 R/B issue mtd: rawnand: qcom: Add NAND controller support for SDX55 dt-bindings: qcom_nandc: Add SDX55 QPIC NAND documentation mtd: rawnand: mxc: Use a single line for of_device_id mtd: rawnand: mxc: Use device_get_match_data() mtd: rawnand: meson: Fix a resource leak in init mtd: rawnand: gpmi: Use of_device_get_match_data() mtd: rawnand: Add NAND controller support on Intel LGM SoC dt-bindings: mtd: Add Nand Flash Controller support for Intel LGM SoC mtd: spinand: micron: Add support for MT29F2G01AAAED mtd: spinand: micron: Use more specific names mtd: rawnand: gpmi: fix reference count leak in gpmi ops dt-bindings: mtd: gpmi-nand: Fix matching of clocks on different SoCs mtd: spinand: macronix: Add support for MX35LFxGE4AD mtd: plat-ram: correctly free memory on error path in platram_probe() ...
2020-12-16net/connector: Add const qualifier to cb_idGeoff Levand1-1/+1
The connector driver never modifies any cb_id passed to it, so add a const qualifier to those arguments so callers can declare their struct cb_id as a constant object. Fixes build warnings like these when passing a constant struct cb_id: warning: passing argument 1 of ‘cn_add_callback’ discards ‘const’ qualifier from pointer target Signed-off-by: Geoff Levand <geoff@infradead.org> Link: https://lore.kernel.org/r/a9e49c9e-67fa-16e7-0a6b-72f6bd30c58a@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.