aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl-gw5904.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23ARM: dts: imx6qdl-gw5904: atecc508a supportTim Harvey1-0/+5
Add one node for the Atmel ATECC508A 'CryptoAuthentication' i2c device. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-03-15ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cellsTim Harvey1-2/+0
Remove the unnecessary #address-cells/#size-cells to avoid warnings from W=1 build like this: arch/arm/boot/dts/imx6qdl-gw52xx.dtsi:33.12-78.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Tim Harvey <tharvey@gateworks.com> [fabio: Make the warning messages more succint] Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-22ARM: dts: imx6qdl-gw5xxx: correct interrupt flagsKrzysztof Kozlowski1-1/+2
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6qdl-gw: add Gateworks System Controller supportTim Harvey1-1/+140
Add Gateworks System Controller support to Gateworks Ventana boards: - add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers. - add dt bindings for gpio-keys driver for push-button and interrupt events Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi filesUwe Kleine-König1-0/+1
The imx-pwm driver supports 3 cells and this is the more flexible setting. So use it by default and overwrite it back to two for the files that reference the PWMs with just 2 cells to minimize changes. This allows to drop explicit setting to 3 cells for the boards that already depend on this. The boards that are now using 2 cells explicitly can be converted to 3 individually. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn supportTim Harvey1-0/+31
Add one node for the accel/gyro i2c device and another for the separate magnetometer device in the lsm9ds1. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi1-0/+1
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-05-14ARM: dts: imx: Remove #address/#size-cells from switch nodesFabio Estevam1-2/+0
Remove unnecessary #address-cells/#size-cells from the switch nodes to fix the following DTC warnings: arch/arm/boot/dts/imx6q-b450v3.dtb: Warning (avoid_unnecessary_addr_size): /mdio-gpio/switch@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12ARM: dts: imx: Add memory node unit nameMarco Franchi1-1/+1
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx: add Gateworks Ventana GW5904 supportTim Harvey1-0/+641
The Gateworks Ventana GW5904 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB) * 8GB eMMC * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCIe socket (with PCIe, USB) * 1x miniPCIe socket (USB) * 1x M.2 socket (USB, 2x SIM) * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * GPS (optional uBlox EVA-M8M) * Application headers: - 2x RS232 UART (TX/RX/CTS/RTS) - 8x TTL GPIO (3x configurable as PWM) - 1x LVDS display 3D+C with i2c touch and PWM backlight * MV88E6176 GbE Switch (uplink to IMX FEC) * Front panel connectors: - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG - 4x GbE LAN Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.