aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6qdl.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-12ARM: dts: imx: update sdma node name formatJoy Zou1-1/+1
Node names should be generic, so change the sdma node name format 'sdma' into 'dma-controller'. Acked-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-07-11Merge tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann1-3/+3
i.MX device tree change for 5.20: - A series from Alexander Stein to fix some i.MX6UL dt_binding_check warnings. - Replace deprecated 'enable-sdio-wakeup' property with 'wakeup-source' for a couple of boards. - A set of imx7-colibri device tree updates from Marcel Ziswiler to improve devices Display, Touch, Ethernet and SD/MMC, and also adds Toradex Iris carrier board. - A few improvements on imx6qdl-colibri board, correct SGTL5000 MCLK handling, simplify handling of inverted PWM backlight. - A series from Max Krummenacher (and Oleksandr Suvorov) to improve the existing i.MX6 Apalis carrier board device trees and adds a new device tree for the Ixora V1.2 carrier board. - Add USB dual-role switching using extcon for imx7-colibri board. - Add SFP node for TA 2.1 devices for LayerScape SoCs. - Other small and random updates on various boards. * tag 'imx-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (61 commits) ARM: dts: layerscape: Add SFP node for TA 2.1 devices ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3 ARM: dts: imx6q-bosch-acc: Replace 'enable-sdio-wakeup' ARM: dts: imx7d-smegw01: Replace 'enable-sdio-wakeup' ARM: dts: imx6q-apalis: Cleanup ARM: dts: imx6q-apalis: backlight pwm: Adapt brightness steps ARM: dts: imx6q-apalis: backlight pwm: Simplify inverted backlight ARM: dts: imx6q-apalis: Add support for Toradex Ixora V1.2 carrier boards ARM: dts: imx6q-apalis: Clean-up sd card support ARM: dts: imx6q-apalis: Add adv7280 video input ARM: dts: imx6q-apalis: Add ov5640 mipi csi camera ARM: dts: imx6q-apalis: Disable stmpe touchscreen ARM: dts: imx6q-apalis: Disable HDMI ARM: dts: imx6q-apalis: Add LVDS panel support ARM: dts: imx6q-apalis: move gpio-keys to SoM dtsi ARM: dts: imx6q-apalis: Move Atmel MXT touch ctrl to SoM dtsi ARM: dts: imx6q-apalis: Move pinmux groups to SoM dtsi ARM: dts: imx6q-apalis: Move parallel rgb interface to SoM dtsi ARM: dts: imx6q-apalis: Command pmic to standby for poweroff ARM: dts: imx6q-apalis: Add gpio-line-names ... Link: https://lore.kernel.org/r/20220709082951.15123-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-06-20ARM: dts: imx: Pass a label to the AIPS nodesFabio Estevam1-2/+2
Pass a label to the AIPS nodes to make it easier to reference it from other devicetree files. Some i.MX dtsi files already describe labels for the AIPS nodes. Make it available for all SoCs for consistency. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx: Pass a label to the soc nodeFabio Estevam1-1/+1
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-14ARM: dts: imx6qdl: correct PU regulator ramp delayLucas Stach1-1/+1
Contrary to what was believed at the time, the ramp delay of 150us is not plenty for the PU LDO with the default step time of 512 pulses of the 24MHz clock. Measurements have shown that after enabling the LDO the voltage on VDDPU_CAP jumps to ~750mV in the first step and after that the regulator executes the normal ramp up as defined by the step size control. This means it takes the regulator between 360us and 370us to ramp up to the nominal 1.15V voltage for this power domain. With the old setting of the ramp delay the power up of the PU GPC domain would happen in the middle of the regulator ramp with the voltage being at around 900mV. Apparently this was enough for most units to properly power up the peripherals in the domain and execute the reset. Some units however, fail to power up properly, especially when the chip is at a low temperature. In that case any access to the GPU registers would yield an incorrect result with no way to recover from this situation. Change the ramp delay to 380us to cover the measured ramp up time with a bit of additional slack. Fixes: 40130d327f72 ("ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14ARM: dts: imx6qdl: drop "fsl,imx-ckih1"Giulio Benetti1-1/+1
"fsl,imx-ckih1" is useless since no driver deals with it, so let's drop it. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14ARM: dts: imx6qdl: drop "fsl,imx-ckil"Giulio Benetti1-1/+1
"fsl,imx-ckil" is useless since no driver deals with it, so let's drop it. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14ARM: dts: imx6qdl: drop "fsl,imx-osc"Giulio Benetti1-1/+1
"fsl,imx-osc" is useless since no driver deals with it, so let's drop it. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14ARM: dts: imx: Change spba to spba-busAdam Ford1-1/+1
With the updated dt-bindings for the spba-bus, rename spba@xxxx to spba-bus@xxxx. There are no functional changes. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: fix the schema check errorsRichard Zhu1-4/+3
- ranges property should be grouped by region, with no functional changes. Otherwise, schema dtbs_check would report the following errors. "linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed: linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed: [[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'boolean' True was expected [[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'null' [2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640] is too long From schema: linux-imx/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml" - refer to commit 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows"). The num-viewport is not required anymore, remove them totally. - dt_binding_check complains "compatible: ['fsl,imx6qp-pcie', 'snps,dw-pcie'] is too long", remove "snps,dw-pcie" from the compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"Robin Gong1-4/+4
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS ->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA scripts should keep the same behaviour, the issue only caught in AIPS script sounds not solide. The issue is more likely as the ecspi errata ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf): eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to be sent twice So revert commit 'dd4b487b32a3' firstly. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-11ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoderLaurent Pinchart1-11/+14
In preparation for the conversion of the DWC HDMI TX device tree bindings to YAML, move the HDMI encoder's 'port' nodes under a 'ports' node. The 'ports' node is optional in the OF graph implementation, but YAML bindings require it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16ARM: dts: imx: Change flexcan node name to "can"Marc Kleine-Budde1-2/+2
Change i.MX SoCs nand node name from "flexcan" to "can" to be compliant with yaml schema, it requires the nodename to be "can". This fixes the following error found by dtbs_check: arch/arm/boot/dts/imx6dl-apf6dev.dt.yaml: flexcan@2090000: $nodename:0: 'flexcan@2090000' does not match '^can(@.*)?$' From schema: Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml Cc: Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03ARM: dts: imx: add usb aliasPeng Fan1-0/+4
Add usb alias for bootloader searching the controller in correct order. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-31ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driverOleksij Rempel1-2/+2
After this patch we need 2 arguments less for the fsl,stop-mode property: | commit d9b081e3fc4bdc33e672dcb7bb256394909432fc | Author: Marc Kleine-Budde <mkl@pengutronix.de> | Date: Sun Jun 14 21:09:20 2020 +0200 | | can: flexcan: remove ack_grp and ack_bit handling from driver | | Since commit: | | 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment | | the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode | acknowledge and not the acknowledgment on chip level. | | This means the 4th and 5th value of the property "fsl,stop-mode" isn't used | anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver. This patch removes the two last arguments, as they are not needed anymore. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-09-05ARM: dts: imx6qdl: add enet_out clk supportMarco Felsch1-1/+2
Like the other i-MX devices the i.MX6 family can output the enet tx clock on the pad to feed the connected device. Add the missing clk here to avoid local fixups like: arch/arm/boot/dts/imx6qdl-tx6.dtsi. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22ARM: dts: imx: Change gpmi nand node name to nand-controllerAnson Huang1-1/+1
Change i.MX SoCs nand node name from "gpmi-nand" to "nand-controller" to be compliant with yaml schema, it requires the nodename to be "nand-controller". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi filesUwe Kleine-König1-4/+4
The imx-pwm driver supports 3 cells and this is the more flexible setting. So use it by default and overwrite it back to two for the files that reference the PWMs with just 2 cells to minimize changes. This allows to drop explicit setting to 3 cells for the boards that already depend on this. The boards that are now using 2 cells explicitly can be converted to 3 individually. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache@a02000: $nodename:0: 'l2-cache@a02000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Change usdhc node name on i.MX6/i.MX7 SoCsAnson Huang1-4/+4
Change i.MX6/i.MX7 SoCs usdhc node name from usdhc to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx6qdl: Remove invalid interrupt for GPC nodeAnson Huang1-2/+1
In latest i.MX6Q RM Rev.6, 05/2020, #90 SPI interrupt is reserved, so remove it from GPC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: change ocotp node name on i.MX6/7 SoCsAnson Huang1-1/+1
Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Make tempmon node as child of anatop nodeAnson Huang1-11/+11
i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-2/+11
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-05-26ARM: dts: imx: add ethernet stop mode propertyFugang Duan1-1/+1
- Update the imx6qdl gpr property to define gpr register offset and bit in DT. - Add imx6sx/imx6ul/imx7d ethernet stop mode property. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-26Merge tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann1-2/+11
i.MX device tree changes for 5.8: - A series from Anson Huang updating SRC devices to match bindings schema definition. - Correct CPU supply name and add cpu1 supply for i.MX7D. - Convert thermal device to use nvmem interface to get fuse data for imx6qdl and imx6sl. - A series from Tim Harvey to update imx6qdl-gw devices, adding support of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc. - Add input MUX for ENET2 MDIO into IMX7D pin functions. - Misc random device addition or update. * tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter ARM: dts: imx5: make src node name generic ARM: dts: imx50: Add src node interrupt ARM: dts: imx: make src node name generic ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio ARM: dts: imx6sl: Use nvmem interface to get fuse data ARM: dts: imx6qdl: Use nvmem interface to get fuse data ARM: dts: imx6qdl-gw5910: fix wlan regulator ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support ARM: dts: imx53: Add src node interrupt ARM: dts: imx51: Add src node interrupt ARM: dts: imx50: Remove unused iomuxc-gpr node ARM: dts: imx6qdl-gw552x: add USB OTG support ARM: dts: imx6-sr-som: add ethernet PHY configuration arm: dts: ls1021atwr: Add QSPI node properties ARM: dts: e60k02: add interrupt for PMIC ARM: dts: colibri: introduce device trees with UHS-I support ARM: dts: imx7d: Add cpu1 supply ... Link: https://lore.kernel.org/r/20200523032516.11016-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-20ARM: dts: imx: make src node name genericAnson Huang1-1/+1
Node name should be generic, use "reset-controller" instead of "src" for i.MX6/i.MX7 SoCs src nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-20ARM: dts: imx6qdl: Use nvmem interface to get fuse dataAnson Huang1-1/+10
Although ocotp clock is always ON for i.MX6QDL, OCOTP can be accessed directly, but since i.MX6QDL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-07ARM: dts: imx6: add fec gpr property.Martin Fuzzey1-0/+1
This is required for wake on lan on i.MX6 Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-07ARM: dts: imx6: Use gpc for FEC interrupt controller to fix wake on LAN.Martin Fuzzey1-3/+2
In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6af0d5 ("ARM: imx6: convert GPC to stacked domains") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-16ARM: dts: imx: add nvmem property for cpu0Peng Fan1-0/+6
Add nvmem related property for cpu0, then nvmem API could be used to read cpu speed grading to avoid directly read OCOTP registers mapped which could not handle defer probe. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11ARM: dts: imx: align name for crypto node and child nodesHoria Geantă1-3/+3
crypto node should use the "crypto" generic naming, and not a specific one ("sahara", "dcp", "caam"). Child nodes of the crypto node for caam crypto engine should use the "jr" name (without an index), as indicated in the DT binding. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11ARM: dts: imx: Make iomuxc node name genericAnson Huang1-1/+1
Node name should be generic, use "pinctrl" instead of "iomuxc" for all i.MX6/7 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24ARM: dts: imx: Align ocotp node nameAnson Huang1-1/+1
Node name should be generic, use "ocotp-ctrl" instead of "ocotp" for all i.MX6 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24ARM: dts: imx: make wdog node name genericAnson Huang1-2/+2
Node name should be generic, use "watchdog" instead of "wdog" for wdog nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: make clks node name genericAnson Huang1-1/+1
Node name should be generic, use "clock-controller" instead of "ccm" for clks node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: make kpp node name genericAnson Huang1-1/+1
Node name should be generic, use "keypad" instead of "kpp" for kpp node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: make gpt node name genericAnson Huang1-1/+1
Node name should be generic, use "timer" instead of "gpt" for gpt node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: use generic name busPeng Fan1-2/+2
Per devicetree specification, generic names are recommended to be used, such as bus. i.MX AIPS is a AHB - IP bridge bus, so we could use bus as node name. Script: sed -i "s/\<aips@/bus@/" arch/arm/boot/dts/imx*.dtsi sed -i "s/\<aips@/bus@/" arch/arm/boot/dts/vf*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/boot/dts/imx*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/boot/dts/vf*.dtsi Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6: drop gpmi-nand address and size cellsMarco Felsch1-2/+0
Since commit fe2585e9c29a ("doc: dt: mtd: support partitions in a special 'partitions' subnode") and commit 5cfdedb7b9a0 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") the partitioning should be within a partitions sub-node. Baseboard device trees following that scheme will get a dtc warning due to the predefined #address-cells and #size-cells properties: arch/arm/boot/dts/imx6qdl.dtsi:171.26-189.5: Warning (avoid_unnecessary_addr_size): /soc/gpmi-nand@112000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property I found no upstream imx6 baseboard using the old partitioning scheme, so we can drop the two properties to avoid such warnings. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19ARM: dts: imx6: replace simple-bus by simple-mfd for anatopMarco Felsch1-1/+1
Replace it to fix the following DTC warnings: arch/arm/boot/dts/imx6qdl.dtsi:702.19-715.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:717.19-730.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:732.19-745.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:747.32-762.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:764.29-779.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpu: missing or empty reg/ranges property arch/arm/boot/dts/imx6qdl.dtsi:781.31-796.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc: missing or empty reg/ranges property Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18ARM: dts: imx6qdl: Enable SNVS power key according to board designAnson Huang1-0/+1
The SNVS power key depends on board design, by default it should be disabled in SoC DT and ONLY be enabled on board DT if it is wired up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOsAnson Huang1-3/+3
On i.MX6Q/DL SabreSD board, vgen5 supplies vdd1p1/vdd2p5 LDO and sw2 supplies vdd3p0 LDO, this patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log: vdd1p1: supplied by regulator-dummy vdd3p0: supplied by regulator-dummy vdd2p5: supplied by regulator-dummy With this patch, the power supply is more accurate: vdd1p1: supplied by VGEN5 vdd3p0: supplied by SW2 vdd2p5: supplied by VGEN5 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20ARM: dts: imx6qdl: Assign corresponding clocks instead of dummy clockAnson Huang1-2/+2
i.MX6Q/DL's WDOGs use IMX6QDL_CLK_IPG as clock root, assign IMX6QDL_CLK_IPG to them instead of IMX6QDL_CLK_DUMMY. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMAAndrey Smirnov1-1/+1
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality(this at least breaks RAVE SP serdev driver on RDU2). Fix the code to specify IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-03ARM: dts: imx6qdl: Specify viewport count for PCIE blockAndrey Smirnov1-0/+1
i.MX6 comes with 4 viewports, so configure PCIE node accordingly so that the driver won't assume we only have 2. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-21ARM: dts: imx6qdl: Improve mmdc1 nodeAnson Huang1-0/+2
Add MMDC1 compatible string which is missing, and also set it to be disabled by default, as most of the platforms ONLY use single channel MMDC0, if dual MMDC channels are used, it can be enabled in board dts file. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-21ARM: dts: imx: make MMDC node name genericAnson Huang1-2/+2
Node name should be generic, so use "memory-controller" instead of "mmdc" for MMDC node name, also remove "mmdc" label for platforms with single MMDC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-20ARM: dts: imx6qdl: Enable fsl,sec-v4.0-pwrkeyAdam Ford1-0/+9
The imx6q Technical reference manual shows the interrupt is available to wake from sleep using the power button. The driver has been available for quite some time, and other variants of the i.MX6 have it enabled, so this implements it much like the others. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6qdl: Fix memory node duplicationMarco Franchi1-2/+0
Boards based on imx6qdl have duplicate memory nodes: - One coming from the board device tree file: memory@ - One coming from the imx6qdl.dtsi file. Fix the duplication by removing the memory node from the imx6qdl.dtsi file and by adding 'device_type = "memory";' in the board Device Tree. Converted using the following command: perl -p0777i -e 's/memory\@10000000 \{\n/memory\@10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"`` Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.