aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6sx.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-12ARM: dts: imx: update sdma node name formatJoy Zou1-1/+1
Node names should be generic, so change the sdma node name format 'sdma' into 'dma-controller'. Acked-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sx: add missing properties for sramAlexander Stein1-0/+6
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-06-20ARM: dts: imx: Pass a label to the soc nodeFabio Estevam1-1/+1
Pass a label to the 'soc' node to make it easier to reference it from other devicetree files. U-Boot, for example usually needs to access the AIPS node to pass U-Boot-specific properties. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: fix the schema check errorsRichard Zhu1-3/+3
- ranges property should be grouped by region, with no functional changes. Otherwise, schema dtbs_check would report the following errors. "linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed: linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed: [[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'boolean' True was expected [[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'null' [2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640] is too long From schema: linux-imx/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml" - refer to commit 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows"). The num-viewport is not required anymore, remove them totally. - dt_binding_check complains "compatible: ['fsl,imx6qp-pcie', 'snps,dw-pcie'] is too long", remove "snps,dw-pcie" from the compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-03ARM: dts: imx: add usb aliasPeng Fan1-0/+3
Add usb alias for bootloader searching the controller in correct order. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-31ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driverOleksij Rempel1-2/+2
After this patch we need 2 arguments less for the fsl,stop-mode property: | commit d9b081e3fc4bdc33e672dcb7bb256394909432fc | Author: Marc Kleine-Budde <mkl@pengutronix.de> | Date: Sun Jun 14 21:09:20 2020 +0200 | | can: flexcan: remove ack_grp and ack_bit handling from driver | | Since commit: | | 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment | | the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode | acknowledge and not the acknowledgment on chip level. | | This means the 4th and 5th value of the property "fsl,stop-mode" isn't used | anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver. This patch removes the two last arguments, as they are not needed anymore. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-08-22ARM: dts: imx: Change gpmi nand node name to nand-controllerAnson Huang1-1/+1
Change i.MX SoCs nand node name from "gpmi-nand" to "nand-controller" to be compliant with yaml schema, it requires the nodename to be "nand-controller". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi filesUwe Kleine-König1-8/+8
The imx-pwm driver supports 3 cells and this is the more flexible setting. So use it by default and overwrite it back to two for the files that reference the PWMs with just 2 cells to minimize changes. This allows to drop explicit setting to 3 cells for the boards that already depend on this. The boards that are now using 2 cells explicitly can be converted to 3 individually. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache@a02000: $nodename:0: 'l2-cache@a02000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx6sx-sdb: Add MQS supportShengjiu Wang1-0/+6
Add MQS support. As the pin conflict with usdhc2, then need to add a separate dts. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx6sx-sabreauto: Add cs42888 sound card supportShengjiu Wang1-0/+4
Complete the ESAI node and Add cs42888 sound card support. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx6sx: Enable ASRC deviceShengjiu Wang1-8/+18
Add compatible string, update the clock table, add fsl,asrc-rate and fsl,asrc-width property. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Change usdhc node name on i.MX6/i.MX7 SoCsAnson Huang1-4/+4
Change i.MX6/i.MX7 SoCs usdhc node name from usdhc to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: change ocotp node name on i.MX6/7 SoCsAnson Huang1-1/+1
Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx: Make tempmon node as child of anatop nodeAnson Huang1-10/+10
i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-05-26ARM: dts: imx: add ethernet stop mode propertyFugang Duan1-0/+2
- Update the imx6qdl gpr property to define gpr register offset and bit in DT. - Add imx6sx/imx6ul/imx7d ethernet stop mode property. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-20ARM: dts: imx: make src node name genericAnson Huang1-1/+1
Node name should be generic, use "reset-controller" instead of "src" for i.MX6/i.MX7 SoCs src nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-16ARM: dts: imx: add nvmem property for cpu0Peng Fan1-0/+6
Add nvmem related property for cpu0, then nvmem API could be used to read cpu speed grading to avoid directly read OCOTP registers mapped which could not handle defer probe. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11ARM: dts: imx: align name for crypto node and child nodesHoria Geantă1-3/+3
crypto node should use the "crypto" generic naming, and not a specific one ("sahara", "dcp", "caam"). Child nodes of the crypto node for caam crypto engine should use the "jr" name (without an index), as indicated in the DT binding. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-03-11ARM: dts: imx: Make iomuxc node name genericAnson Huang1-1/+1
Node name should be generic, use "pinctrl" instead of "iomuxc" for all i.MX6/7 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24ARM: dts: imx: Align ocotp node nameAnson Huang1-1/+1
Node name should be generic, use "ocotp-ctrl" instead of "ocotp" for all i.MX6 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-24ARM: dts: imx: make wdog node name genericAnson Huang1-3/+3
Node name should be generic, use "watchdog" instead of "wdog" for wdog nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: make clks node name genericAnson Huang1-1/+1
Node name should be generic, use "clock-controller" instead of "ccm" for clks node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: make kpp node name genericAnson Huang1-1/+1
Node name should be generic, use "keypad" instead of "kpp" for kpp node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: make gpt node name genericAnson Huang1-1/+1
Node name should be generic, use "timer" instead of "gpt" for gpt node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-02-17ARM: dts: imx: use generic name busPeng Fan1-3/+3
Per devicetree specification, generic names are recommended to be used, such as bus. i.MX AIPS is a AHB - IP bridge bus, so we could use bus as node name. Script: sed -i "s/\<aips@/bus@/" arch/arm/boot/dts/imx*.dtsi sed -i "s/\<aips@/bus@/" arch/arm/boot/dts/vf*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/boot/dts/imx*.dtsi sed -i "s/\<aips-bus@/bus@/" arch/arm/boot/dts/vf*.dtsi Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-06ARM: dts: imx: Replace "simple-bus" with "simple-mfd" for anatopFabio Estevam1-1/+1
Replace "simple-bus" with "simple-mfd" for anatop node in order to fix the following build warnings with W=1: arch/arm/boot/dts/imx6sx.dtsi:603.31-616.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-1p1: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:618.31-631.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-3p0: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:633.31-646.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-2p5: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:648.32-663.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddcore: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:665.33-679.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddpcie: missing or empty reg/ranges property arch/arm/boot/dts/imx6sx.dtsi:681.31-696.7: Warning (simple_bus_reg): /soc/aips-bus@2000000/anatop@20c8000/regulator-vddsoc: missing or empty reg/ranges property Based on a patch from Marco Felsch for the imx6qdl.dtsi. Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-03ARM: dts: imx: Cleanup style around assignment operatorKrzysztof Kozlowski1-2/+2
Use a space before and after assignment operator to have consistent style. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-23ARM: dts: imx6sx: move GIC to right location in DTAnson Huang1-9/+9
GIC is inside of SoC from architecture perspective, it should be located inside of soc node in DT. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-18ARM: dts: imx6sx: Enable SNVS power key according to board designAnson Huang1-0/+1
The SNVS power key depends on board design, by default it should be disabled in SoC DT and ONLY be enabled on board DT if it is wired up. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOsAnson Huang1-3/+3
On i.MX6SX SDB board, vgen6 supplies vdd1p1/vdd2p5 LDO and sw2 supplies vdd3p0 LDO, this patch assigns corresponding power supply for vdd1p1/vdd2p5/vdd3p0 to avoid confusion by below log: vdd1p1: supplied by regulator-dummy vdd3p0: supplied by regulator-dummy vdd2p5: supplied by regulator-dummy With this patch, the power supply is more accurate: vdd1p1: supplied by VGEN6 vdd3p0: supplied by SW2 vdd2p5: supplied by VGEN6 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-04-11ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMAAndrey Smirnov1-1/+1
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Angus Ainslie (Purism) <angus@akkea.ca> Cc: Chris Healy <cphealy@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-21ARM: dts: imx: make MMDC node name genericAnson Huang1-1/+1
Node name should be generic, so use "memory-controller" instead of "mmdc" for MMDC node name, also remove "mmdc" label for platforms with single MMDC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-03-06Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+18
Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, but with just over 500 non-merge changesets still dwarfes the rest of the SoC tree. Three new SoC platforms get added, each one a follow-up to an existing product, and added here in combination with a reference platform: - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics Applications": https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X These are actual commercial products we now support with an in-kernel device tree source file: - Bosch Guardian is a product made by Bosch Power Tools GmbH, based on the Texas Instruments AM335x chip - Winterland IceBoard is a Texas Instruments AM3874 based machine used in telescopes at the south pole and elsewhere, see commit d031773169df2 for some pointers: - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500 baseboard management controller. This is for running on the BMC. - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch used in airplanes. - Phicomm K3 is a WiFi router based on Broadcom bcm47094 - Methode Electronics uDPU FTTdp distribution point unit - X96 Max, a generic TV box based on Amlogic G12a (S905X2) - NVIDIA Shield TV (Darcy) based on Tegra210 And then there are several new SBC, evaluation, development or modular systems that we add: - Three new Rockchips rk3399 based boards: - FriendlyElec NanoPC-T4 and NanoPi M4 - Radxa ROCK Pi 4 - Five new i.MX6 family SoM modules and boards for industrial products: - Logic PD i.MX6QD SoM and evaluation baseboad - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357 microcontroller - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system in 96boards form factor - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual platform for corresponding to the latest "fast model" - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit and 64-bit mode. - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards enterprise form factor - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108 For already supported boards and SoCs, we often add support for new devices after merging the drivers. This time, the largest changes include updates for - STMicroelectronics stm32mp1, which was now formally launched last week - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip - Action Semi S700 - TI AM654x, their recently merged 64-bit SoC from the OMAP family - Various Amlogic Meson SoCs - Mediatek MT2712 - NVIDIA Tegra186 and Tegra210 - The ancient NXP lpc32xx family - Samsung s5pv210, used in some older mobile phones Many other chips see smaller updates and bugfixes beyond that" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits) ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4 dt-bindings: net: ti: deprecate cpsw-phy-sel bindings ARM: dts: am335x: switch to use phy-gmii-sel ARM: dts: am4372: switch to use phy-gmii-sel ARM: dts: dm814x: switch to use phy-gmii-sel ARM: dts: dra7: switch to use phy-gmii-sel arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference ARM: dts: exynos: Add support for secondary DAI to Odroid XU4 ARM: dts: exynos: Add support for secondary DAI to Odroid XU3 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite ARM: dts: exynos: Add stdout path property to Arndale board ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU ARM: dts: exynos: Enable ADC on Odroid HC1 arm64: dts: sprd: Remove wildcard compatible string arm64: dts: sprd: Add SC27XX fuel gauge device arm64: dts: sprd: Add SC2731 charger device arm64: dts: sprd: Add ADC calibration support arm64: dts: sprd: Remove PMIC INTC irq trigger type arm64: dts: rockchip: Enable tsadc device on rock960 ARM: dts: rockchip: add chosen node on veyron devices ...
2019-02-11ARM: dts: imx6sx: Add DISPLAY power domain supportLeonard Crestez1-1/+18
This was implemented in the driver but not actually defined and referenced in dts. This makes it always on. From reference manual in section "10.4.1.4.1 Power Distribution": "Display domain - The DISPLAY domain contains GIS, CSI, PXP, LCDIF, PCIe, DCIC, and LDB. It is supplied by internal regulator." The current pd_pcie is actually only for PCIE_PHY, the PCIE ip block is actually inside the DISPLAY domain. Handle this by adding the pcie node in both power domains. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-13ARM: dts: imx6sx: correct backward compatible of gptAnson Huang1-1/+1
i.MX6SX has same GPT type as i.MX6DL, in GPT driver, it uses below TIMER_OF_DECLARE, so the backward compatible should be "fsl,imx6dl-gpt", correct it. TIMER_OF_DECLARE(imx6sx_timer, "fsl,imx6sx-gpt", imx6dl_timer_init_dt); Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx: Add flexcan stop mode wakeup supportAisheng Dong1-0/+2
Add stop-mode property which is required by stop mode wakeup feature. Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx: Fix memory node duplicationFabio Estevam1-2/+0
Boards based on imx6sx have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6sx.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx: Add dummy PHYs for HSIC-only USB controllersFrieder Schrempf1-0/+6
Some SOCs in the i.MX6 family have a USB host controller that is only capable of the HSIC interface and has no on-board PHY. To be able to use these controllers, we need to add "usb-nop-xceiv" dummy PHYs. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx: specify proper clock for nodes with dummy clockAnson Huang1-4/+4
From i.MX6SX reference manual CCM chapter, KPP and WDOGn use IPG clock as their clock, specify IPG clock for KPP and WDOGn instead of DUMMY clock. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-10ARM: dts: imx6sx: Complete the PXP supportFabio Estevam1-3/+3
According to Documentation/devicetree/bindings/media/fsl-pxp.txt, only one PXP clock needs to be described and it should be named "axi". Also pass the compatible string as suggested in the bindings doc. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-11-05ARM: dts: imx6: add mmdc ipg clockAnson Huang1-0/+1
i.MX6 SoCs has MMDC clock gates in CCM CCGR, add clock property for MMDC driver's clock operation. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-26ARM: dts: imx: Fix SPI bus warningsRob Herring1-7/+7
dtc has new checks for SPI buses. Fix the warnings in node names and unit-addresses. There's over 100 warnings for FSL boards, a few examples: arch/arm/boot/dts/imx28-duckbill-2-spi.dtb: Warning (spi_bus_bridge): /apb@80000000/apbh@80000000/ssp@80014000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx53-ppd.dtb: Warning (spi_bus_bridge): /soc/aips@50000000/spba@50000000/ecspi@50010000: node name for SPI buses should be 'spi' arch/arm/boot/dts/imx6dl-colibri-eval-v3.dtb: Warning (spi_bus_reg): /soc/aips-bus@2000000/spba-bus@2000000/spi@2014000/mcp251x@1: SPI bus unit address format error, expected "0" Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-21Merge tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dtOlof Johansson1-5/+11
i.MX device tree update for 4.19: - Add device tree support for i.MX6SLL SoC. - New board support: ConnectCore 6UL System-On-Module and SBC Express; ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board; i.MX53 HSC/DDC boards from K+P. - Remove fake regulator bus container node and enable USB OTG support for i.MX6 wandboard and riotboard. - Populate RAVE SP EEPROM, backlight, power button and watchdog devices for ZII boards. - Add cooling-cells for cpufreq cooling device, and add OPP properties for all CPUs. - A series from Anson Huang to enable LCD panel and backlight support for imx6sll-evk board. - Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP development boards, because the regulator is critical there and cannot be turned off. - Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF, Tigerp, PMU, CodaHx4 VPU. - Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and imx53-ppd board. - Switch more device tree license to use SPDX identifier. - Switch to use OF graph to describe the display for imx7d-nitrogen7. - Add chosen/stdout-path for more boards, so that earlycon can be enabled more easily on kernel cmdline. - Convert GPC to new device tree bindings and add Vivante gpu nodes for i.MX6SL SoC. - Add more device support for imx6dl-mamoj board: parallel display, WiFi and USB. - A series from Stefan Agner to update i.MX6 apalis/colibri boards on various aspects: SD/MMC card detection, regulators, etc. * tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits) ARM: dts: imx7d: remove "operating-points" property for cpu1 ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings ARM: dts: vf610: Add ZII CFU1 board ARM: dts: imx6dl-mamoj: Add usb host and device support ARM: dts: imx6dl-mamoj: Add Wifi support ARM: dts: imx6dl-mamoj: Add parallel display support ARM: dts: vf610: Add ZII SSMB SPU3 board ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size ARM: dts: imx6sl-evk: make pfuze100 sw4 always on ARM: dts: imx6sll-evk: make pfuze100 sw4 always on ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on ARM: dts: imx6sl-evk: add missing GPIO iomux setting ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration ARM: dts: imx7d-nitrogen7: use OF graph to describe the display ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier ARM: dts: imx6sl: Add vivante gpu nodes ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel ... Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-11ARM: dts: imx6sx: add ocram_s supportAnson Huang1-0/+6
i.MX6SX has a 16KB always-on ocram bank called ocram_s, enable it as another mmio sram. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-11ARM: dts: imx: Remove optional 'fsl,sec-era' propertyFabio Estevam1-1/+0
Since commit 654f2b937b38 ("crypto: caam - allow retrieving 'era' from register") the CAAM driver is capable of obtaining the era version by reading the appropriate CAAM registers, so let the CAAM driver discover the era version in run-time instead of hardcoding such information in the device tree. According to Documentation/devicetree/bindings/crypto/fsl-sec4.txt the 'fsl,sec-era' is an optional property and this can be safely removed now. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-03ARM: dts: imx6: correct anatop regulators rangeAnson Huang1-4/+4
According to i.MX6 datasheet, the LDO_1P1's typical programming operating range is 1.0V to 1.2V, and the LDO_2P5's typical programming operating range is 2.25V to 2.75V, correct LDO_1P1 and LDO_2P5's regulator range settings for i.MX6 SoCs. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-28ARM: dts: imx: add cooling-cells for cpufreq cooling deviceAnson Huang1-0/+1
Add #cooling-cells for i.MX6/7 SoCs for cpufreq cooling device usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-19ARM: dts: imx6sx: fix irq for pcie bridgeOleksij Rempel1-1/+1
Use the correct IRQ line for the MSI controller in the PCIe host controller. Apparently a different IRQ line is used compared to other i.MX6 variants. Without this change MSI IRQs aren't properly propagated to the upstream interrupt controller. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: b1d17f68e5c5 ("ARM: dts: imx: add initial imx6sx device tree source") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.