aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-29ARM: dts: qcom: use GPIO flags for tlmmKrzysztof Kozlowski1-1/+2
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include gpio.h header if this is first usage of that flag. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220802153947.44457-5-krzysztof.kozlowski@linaro.org
2022-04-12ARM: dts: qcom: ipq4019: User generic node name for DMAKuldeep Singh1-2/+2
Qcom BAM DT spec expects generic DMA controller node name as "dma-controller" to enable validations. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220410175056.79330-5-singh.kuldeep87k@gmail.com
2021-10-23ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dtsDavid Heidelberg1-1/+0
Version dk01.1-c1 didn't have compatible specified, which was causing dt-schema validation warnings. Remove duplicated and useless board compatible from dtsi between board and device. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211009193102.76852-2-david@ixit.cz
2021-01-22ARM: dts: qcom: replace status value "ok" by "okay"Adrian Schmutzler1-9/+9
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Link: https://lore.kernel.org/r/20200830191643.20717-1-freifunk@adrianschmutzler.de [bjorn: Rebased and included fixup of sdx55-mtp] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-25ARM: dts: ipq4019: Add a few peripheral nodesSricharan R1-1/+1
Now with the driver updates for some peripherals being there, add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available peripheral support. Reviewed-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25ARM: dts: ipq4019: Add a default chosen nodeSricharan R1-0/+8
Add a 'chosen' node to select the serial console. This is needed when bootloaders do not pass the 'console=' bootargs. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08ARM: dts: qcom: add and enable both wifi blocks on the IPQ4019Christian Lamparter1-0/+8
This patch adds and enables the device-tree definitions for both qcom,ipq4019-wifi blocks for the IPQ4019. Support for these have been added into the ath10k driver since: commit 280e762e9c72 ("ath10k: enable ipq4019 device probe in ahb module") The binding documentation was added in: commit a47aaa69de88 ("dt: bindings: add new dt entry for pre calibration in qcom, ath10k.txt") This has been tested on an ASUS RT-AC58U (IPQ4019), an AVM Fritz!Box 4040 (IPQ4018), a Compex WPJ428 (IPQ4028) and a Cisco Meraki MR33 (IPQ4029). | a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff [...] | a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 | a000000.wifi: firmware ver 10.4-3.4-00082 api 5 features no-p2p,mfp,[...] | a000000.wifi: board_file api 2 bmi_id 0:16 crc32 5773b188 | a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file [...] ... | a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000 | a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 | a800000.wifi: firmware ver 10.4-3.4-00082 api 5 features no-p2p, [...] | a800000.wifi: board_file api 2 bmi_id 0:17 crc32 5773b188 | a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file [...] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08ARM: dts: qcom: add pseudo random number generator on the IPQ4019Christian Lamparter1-0/+4
This architecture has a pseudo random number generator supported by the existing "qcom,prng" binding. rngtest: bits received from input: 5795960032 rngtest: FIPS 140-2 successes: 289591 rngtest: FIPS 140-2 failures: 207 rngtest: FIPS 140-2(2001-10-10) Monobit: 25 rngtest: FIPS 140-2(2001-10-10) Poker: 28 rngtest: FIPS 140-2(2001-10-10) Runs: 91 rngtest: FIPS 140-2(2001-10-10) Long run: 67 rngtest: FIPS 140-2(2001-10-10) Continuous run: 0 rngtest: input channel speed: (min=244; avg=46122; max=3906250)Kibits/s rngtest: FIPS tests speed: (min=1.327; avg=20.966; max=26.345)Mibits/s rngtest: Program run time: 386965827 microseconds Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08ARM: dts: ipq4019: Move xo and timer nodes to SoC dtsiVaradarajan Narayanan1-19/+0
The node for xo and timer belong to the SoC DTS file. Else, new board DT files may not inherit these nodes. Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-08ARM: dts: ipq4019: Fix pinctrl node nameVaradarajan Narayanan1-1/+1
This patch fixes the pinctrl node addresses to be the correct format. Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19qcom: ipq4019: add DMA nodes to ipq4019 SoC and DK01 device treeMatthew McClintock1-0/+4
This adds the blsp_dma node to the device tree and the required properties for using DMA with serial Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19qcom: ipq4019: add crypto nodes to ipq4019 SoC and DK01 device treeMatthew McClintock1-0/+8
This adds the crypto nodes to the ipq4019 device tree, it also adds the BAM node used by crypto as well which the driver currently requires to operate properly The crypto driver itself depends on some other patches to qcom_bam_dma to function properly: https://lkml.org/lkml/2015/12/1/113 CC: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19qcom: ipq4019: add spi node to ipq4019 SoC and DK01 device treeMatthew McClintock1-0/+37
This will allow boards to enable the SPI bus Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19qcom: ipq4019: add watchdog node to ipq4019 SoC and DK01 device treeMatthew McClintock1-0/+4
This will allow boards to enable watchdog support Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19dts: ipq4019: Add support for IPQ4019 DK01 boardMatthew McClintock1-0/+59
Initial board support dts files for DK01 board. Signed-off-by: Senthilkumar N L <snlakshm@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.