aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7792-blanche.dts (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-06-29ARM: dts: renesas: Fix DA9063 watchdog subnode namesGeert Uytterhoeven1-1/+1
make dtbs_check: arch/arm/boot/dts/r8a7791-koelsch-single-memory-node.dtb: pmic@58: 'wdt' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/mfd/dlg,da9063.yaml ... Change the watchdog child node names to match the DA9063 DT bindings and the Generic Names Recommendation in the Devicetree Specification. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1dafdce285f7d14bec9e2033ac87fb30135895db.1655818230.git.geert+renesas@glider.be
2021-05-31ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keysGeert Uytterhoeven1-0/+8
The GPIO pins connected to the 4 Software Switches (SW2) and the second Tact Switch (SW25) do not have external pull-up resistors, but rely on internal pull-ups being enabled. Fortunately this is satisfied by the initial state of these pins. Make this explicit by enabling bias-pull-up, to remove the dependency on initial state and/or boot loader configuration. Note that the GPIO pin connected to the first Tact Switch (SW24) does have an external pull-up resistor. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/011e4c461767f2dd690b655b3dd501eb554184c1.1619785905.git.geert+renesas@glider.be
2021-03-08ARM: dts: renesas: Group tuples in pin control propertiesGeert Uytterhoeven1-1/+1
To improve human readability and enable automatic validation, the tuples in "pinctrl-*" properties should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210204130517.1647073-4-geert+renesas@glider.be
2020-05-15ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo1-2/+0
Small fixes to make these DTs compliant with the adi,adv7511w and adi,adv7513 bindings: r8a7745-iwg22d-sodimm-dbhd-ca.dts r8a7790-lager.dts r8a7790-stout.dts r8a7791-koelsch.dts r8a7791-porter.dts r8a7792-blanche.dts r8a7793-gose.dts r8a7794-silk.dts: Remove the adi,input-style and adi,input-justification properties. r8a7792-wheat.dts: Reorder the I2C slave addresses of hdmi@3d and hdmi@39 and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20200511110611.3142-3-ricardo.canuelo@collabora.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-06-21ARM: dts: renesas: Use ip=on for bootargsMagnus Damm1-1/+1
Convert bootargs from ip=dhcp to ip=on Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20ARM: dts: r8a779x: Configure PMIC IRQ pinmuxMarek Vasut1-0/+7
The PMIC IRQ line pin multiplexing configuration is missing from the DTs. Since the line is configured correctly by default, the system works fine. However, add the IRQ line pin multiplexing configuration for completeness. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-19ARM: dts: r8a7792: blanche: Add IIC3 and DA9063 PMIC nodeMarek Vasut1-0/+20
Add IIC3 node to R8A7792 SoC device tree and a DA9063 PMIC node to V2H Blanche board device tree. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-07-23ARM: dts: convert to SPDX identifier for Renesas boardsWolfram Sang1-4/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-25ARM: dts: blanche: Enable watchdog supportGeert Uytterhoeven1-0/+5
Enable the watchdog, so the board can be restarted by a watchdog timeout. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18ARM: dts: r8a7792: Convert to new CPG/MSSR bindingsGeert Uytterhoeven1-2/+1
Convert the R-Car V2H SoC from the old "Renesas R-Car Gen2 Clock Pulse Generator (CPG)" and "Renesas CPG Module Stop (MSTP) Clocks" DT bindings to the new unified "Renesas Clock Pulse Generator / Module Standby and Software Reset" DT bindings. This simplifies the DTS files, and allows to add support for reset control later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-26ARM: dts: blanche: add support for general purpose LEDsSergei Shtylyov1-0/+17
Add support for the general purpose LEDs on the Blanche board. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-23ARM: dts: blanche: add DU supportSergei Shtylyov1-0/+125
Define the Blanche board dependent part of the DU device node. Add the device nodes for the Analog Devices ADV7511W HDMI transmitter (connected to DU0) and ADV7123 video DAC (connected to DU1). Add the necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA connectors. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-23ARM: dts: blanche: add SDHI0 supportSergei Shtylyov1-0/+25
Define the Blanche board dependent part of the SDHI0 (connected to the micro-SD slot) device node along with the necessary voltage regulator. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-22ARM: dts: blanche: add support for general purpose switchesSergei Shtylyov1-0/+49
Add support for the general purpose software switches SW2 and tactile switches SW24/25 as a virtual keyboard (like it was done with the Lager/ Koelsch boards). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-08ARM: dts: blanche: add CAN0 supportSergei Shtylyov1-0/+16
Define the Blanche board dependent part of the CAN0 device node along with the CAN_CLK crystal. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-08ARM: dts: blanche: add Ethernet pinsSergei Shtylyov1-0/+14
Add the (previously omitted) pin data for the SMSC LAN89218 Ethernet chip to the Blanche board's device tree: the chip's IRQ output is connected to the SoC's IRQ0 pin and its nCS input is connected to the SoC's EX_CS0# pin. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-08-08ARM: dts: blanche: add SCIF0/3 pinsSergei Shtylyov1-0/+18
Add the (previously omitted) SCIF0/3 pin data to the Blanche board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16ARM: dts: blanche: add Ethernet supportSergei Shtylyov1-1/+22
R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Blanche board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Blanche device tree; enable DHCP and NFS root in the kernel command line for the kernel booting. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-06-16ARM: dts: blanche: initial device treeSergei Shtylyov1-0/+45
Add the initial device tree for the R8A7792 SoC based Blanche board. The board has 2 debug serial ports: SCIF0 and SCIF3; include support for them, so that the serial console can work. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.