aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/rk322x.dtsi (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-05-27ARM: dts: rockchip: add clocks property to cru node rk3228Johan Jonker1-0/+2
Add clocks and clock-names to the rk3228 cru node, because the device has to have at least one input clock. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220330121923.24240-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-04-04ARM: dts: rockchip: use generic node name for dma rk3036/rk322xJohan Jonker1-1/+1
The node names should be generic, so fix this for the rk3036 and rk322x dma node and rename it to "dma-controller". Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220331125644.6841-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-02-12ARM: dts: rockchip: reorder rk322x hmdi clocksSascha Hauer1-2/+2
The binding specifies the clock order to "iahb", "isfr", "cec". Reorder the clocks accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220210142353.3420859-1-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-10-17ARM: dts: rockchip: change gpio nodenamesJohan Jonker1-4/+4
Currently all gpio nodenames are sort of identical to there label. Nodenames should be of a generic type, so change them all. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20211007144019.7461-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20ARM: dts: rockchip: swap timer clock-namesJohan Jonker1-2/+2
With the conversion of rockchip,rk-timer.yaml the clock-names order was set to "pclk", "timer", but nothing was fixed in the ARM dts section of the mainline kernel, so the swap timer clock-names that don't fit. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828102659.7348-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20ARM: dts: rockchip: rename opp-table node namesJohan Jonker1-1/+1
After the conversion to YAML of the Operating Performance Points(OPP) binding the operating-points-v2 property expects the nodename to have the '^opp-table(-[a-z0-9]+)?$' format, so rename all Rockchip ARM dts opp-table node names. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/opp/opp-v2.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828094512.26862-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-22ARM: dts: rockchip: add vpu and vdec node for RK322xAlex Bee1-2/+25
The VPU and the VDEC IP block of RK322x are the same as RK3399 has and the drivers can be used as-is. Add the respective nodes to the device tree. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20210527154455.358869-13-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13ARM: dts: rockchip: add power controller for RK322xAlex Bee1-0/+111
Add the power controller node and the correspondending qos nodes for RK322x. Also add the power-domain property to the nodes that are already present. Signed-off-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/20210527154455.358869-10-knaerzche@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2Johan Jonker1-2/+2
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$" in phy-provider.yaml has required "#phy-cells" for phy nodes. The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes. Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent notifications. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/ phy/phy-provider.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210601164800.7670-4-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-14ARM: dts: rockchip: Remove more clock-names from PWM nodesJohan Jonker1-4/+0
A test with the command below gives this error: /arch/arm/boot/dts/rk3228-evb.dt.yaml: pwm@110b0020: clock-names: ['pwm'] is too short Devices with only one PWM clock use it to both to derive the functional clock for the device and as the bus clock. The driver does not need "clock-names" to get a handle, so remove them all. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210510172911.6763-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-10ARM: dts: rockchip: Fix IOMMU nodes properties on rk322xBenjamin Gaignard1-7/+3
Add '#" to iommu-cells properties. Remove useless interrupt-names properties Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20210507090232.233049-4-benjamin.gaignard@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-05-10ARM: dts: rockchip: Fix thermal sensor cells o rk322xEzequiel Garcia1-1/+1
The number of cells to be used with a thermal sensor specifier must be "1". Fix this. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20210506175514.168365-2-ezequiel@collabora.com
2021-04-11ARM: dts: rockchip: move rk322x mmcx aliases to board dts filesHeiko Stuebner1-3/+0
As suggested by Arnd Bergmann, mmc-aliases are supposed to be board-specific, so move the newly added general aliases to the board-level on rk322x-based boards. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20210324122235.1059292-1-heiko@sntech.de
2021-03-25ARM: dts: rockchip: add new watchdog compatible to rk322x.dtsiJohan Jonker1-1/+1
The watchdog compatible strings are suppose to be SoC orientated. In the more recently added Rockchip rk322x.dtsi file only the fallback string "snps,dw-wdt" is used, so add the new compatible string: "rockchip,rk3228-wdt", "snps,dw-wdt" make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20201218120534.13788-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-26ARM: dts: rockchip: assign a fixed index to mmc devices on rk322x boardsJohan Jonker1-0/+3
Recently introduced async probe on mmc devices can shuffle block IDs. Pin them to fixed values to ease booting in environments where UUIDs are not practical. Use newly introduced aliases for mmcblk devices from [1]. The sort order is based on reg address. [1] https://patchwork.kernel.org/patch/11747669/ Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210118155242.7172-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-01-26ARM: dts: rockchip: Remove bogus "amba" bus nodesRobin Murphy1-18/+11
The "amba" bus nodes wrapping all the DMA-330 nodes serve no useful purpose, and certainly bear no relation at all to the actual underlying interconnect topology. They appear to be cargo-cult copying from a design misstep in the very early days of FDT adoption on ARM, which was righted with the "arm,primecell" compatible, and the last trace of the idea finally purged by commit 2ef7d5f342c1 ("ARM, ARM64: dts: drop "arm,amba-bus" in favor of "simple-bus""). As such, they can simply be removed and the DMA-330 nodes fitted into the normal sort order. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/e682edd25133bde2ed8198138febc90071530a51.1611186142.git.robin.murphy@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmacSugar Zhang1-0/+1
This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439866-68459-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-06-17ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpioJohan Jonker1-3/+3
A test with the command below gives for example this error: arch/arm/boot/dts/rk3288-tinker.dt.yaml: tsadc: otp-gpio: {'phandle': [[54]], 'rockchip,pins': [[0, 10, 0, 118]]} is not of type 'array' 'gpio' is a sort of reserved nodename and should not be used for pinctrl in combination with 'rockchip,pins', so change nodes that end with 'gpio' to end with 'pin' or 'pins'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/ dtschema/schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200524160636.16547-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-06-04Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+10
Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
2020-05-19ARM: dts: rockchip: add rga node for rk322xJustin Swartz1-0/+10
Add a node to define the presence of RGA, a 2D raster graphic acceleration unit. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Link: https://lore.kernel.org/r/20200419125134.29923-2-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-04-27ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsiJohan Jonker1-2/+2
A test with the command below gives these errors: arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0: '#address-cells' is a required property arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1: '#address-cells' is a required property The $nodename pattern for spi nodes is "^spi(@.*|-[0-9a-f])*$". To prevent warnings rename 'spi-0' and 'spi-1' pinctrl sub nodenames to 'spi0' and 'spi1' in 'rk322x.dtsi'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-04-27ARM: dts: rockchip: swap clock-names of gpu nodesJohan Jonker1-1/+1
Dts files with Rockchip 'gpu' nodes were manually verified. In order to automate this process arm,mali-utgard.txt has been converted to yaml. In the new setup dtbs_check with arm,mali-utgard.yaml expects clock-names values in the same order, so fix that. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200425192500.1808-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: remove #address-cells and #size-cells from i2s nodesJohan Jonker1-6/+0
An experimental test with the command below gives for example this error: arch/arm/boot/dts/rk3036-evb.dt.yaml: i2s@10220000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+' '#address-cells' and '#size-cells' are not a valid property for i2s nodes, so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-i2s.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200311162524.19748-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: remove clock-names property from 'generic-ohci' nodesJohan Jonker1-3/+0
A test with the command below gives for example this error: arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30160000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ohci', so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312171441.21144-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-17ARM: dts: rockchip: remove clock-names property from 'generic-ehci' nodesJohan Jonker1-3/+0
A test with the command below gives for example this error: arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30140000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' 'clock-names' is not a valid property name for usb_host nodes with compatible string 'generic-ehci', so remove them. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ehci.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200312171441.21144-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-11ARM: dts: add bus to rockchip amba nodenamesJohan Jonker1-1/+1
A test with the command below gives for example this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' AMBA is a open standard for the connection and management of functional blocks in a SoC. It's compatible with 'simple-bus', so fix this error by adding 'bus' to all Rockchip 'amba' nodes. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/ schemas/simple-bus.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200302153047.17101-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-11ARM: dts: rockchip: fix rockchip,default-sample-phase property namesJohan Jonker1-1/+1
A test with the command below does not detect all errors in combination with 'additionalProperties: false' and allOf: - $ref: "synopsys-dw-mshc-common.yaml#" allOf: - $ref: "mmc-controller.yaml#" 'additionalProperties' applies to all properties that are not accounted-for by 'properties' or 'patternProperties' in the immediate schema. First when we combine rockchip-dw-mshc.yaml, synopsys-dw-mshc-common.yaml and mmc-controller.yaml it gives for example this error: arch/arm/boot/dts/rk3036-evb.dt.yaml: mmc@1021c000: 'default-sample-phase' does not match any of the regexes: '^.*@[0-9]+$', '^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)| uhs-(sdr(12|25|50|104)|ddr50))$', 'pinctrl-[0-9]+' 'default-sample-phase' is not a valid property name for mmc nodes. Fix this error by renaming it to 'rockchip,default-sample-phase'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200307134841.13803-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-03-01ARM: dts: remove g-use-dma from rockchip usb nodesJohan Jonker1-1/+0
A test with the command below gives these errors: arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: usb@30180000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30180000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/rk3228-evb.dt.yaml: usb@30040000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/rk3229-evb.dt.yaml: usb@30040000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm/boot/dts/rk3229-xms6.dt.yaml: usb@30040000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' 'g-use-dma' is not a valid option in dwc2.yaml, so remove it from all Rockchip dtsi files. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml g-use-dma was deprecated in november 2016, see https://patchwork.kernel.org/patch/9420553/ Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200228113922.20266-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-01-18ARM: dts: rockchip: rename dwmmc node names to mmcJohan Jonker1-3/+3
Current dts files with 'dwmmc' nodes are manually verified. In order to automate this process rockchip-dw-mshc.txt has to be converted to yaml. In the new setup rockchip-dw-mshc.yaml will inherit properties from mmc-controller.yaml and synopsys-dw-mshc-common.yaml. 'dwmmc' will no longer be a valid name for a node, so change them all to 'mmc' Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200115185244.18149-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27ARM: dts: rockchip: add display nodes for rk322xJustin Swartz1-0/+83
Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus a few hdmi pinctrl entries to allow for HDMI output. Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> [added assigned-clock settings for hdmiphy output] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-06-27ARM: dts: rockchip: fix vop iommu-cells on rk322xJustin Swartz1-1/+1
iommu-cells obviously needs to start with a "#". Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11ARM: dts: rockchip: bulk convert gpios to their constant counterpartsHeiko Stuebner1-85/+85
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-19ARM: dts: rockchip: Add all CPUs in cooling mapsViresh Kumar1-2/+8
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-17ARM: dts: rockchip: Add missing cooling device properties for CPUs on rk322xViresh Kumar1-0/+3
The cooling device properties, like "#cooling-cells" and "dynamic-power-coefficient", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-06-17ARM: dts: rockchip: use SPDX-License-IdentifierKlaus Goger1-39/+1
Update all 32bit rockchip devicetree files to use SPDX-License-Identifiers. All files except rk3288-veyron-analog-audio.dtsi (which is GPL 2.0 only) claim to be GPL and X11 while the actual license text is MIT. Use the MIT SPDX tag for them. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Brian Norris <briannorris@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-04-16ARM: dts: rockchip: add clocks in iommu nodesJeffy Chen1-0/+8
Add clocks in iommu nodes, since we are going to control clocks in rockchip iommu driver. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-28Merge tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dtArnd Bergmann1-1/+1
Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner: For general soc-specific changes the rk322x socs got their correct grf compatible set. Other than that there are some board-specific changes like the Rock2 getting its otg port, recovery and power keys enabled. The vyasa board gained an enabled emmc node and the phyCORE boards got UHS speeds in their sd card and a fixed sd-card power supply. Finally the veyron boards dropped a nonstandard and unused property. * tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square ARM: dts: rockchip: add recovery button for Rock2 Square ARM: dts: rockchip: add power key for Rock2 Square ARM: dts: rockchip: Add eMMC node for rk3288-vyasa ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK ARM: dts: rockchip: Fix supply node for card's power on phycore som ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'
2018-02-16ARM: dts: rockchip: Fix DWMMC clocksRobin Murphy1-3/+3
Trying to boot an RK3328 box with an HS200-capable eMMC, I see said eMMC fail to initialise as it can't run its tuning procedure, because the sample clock is missing. Upon closer inspection, whilst the clock is present in the DT, its name is subtly incorrect per the binding, so __of_clk_get_by_name() never finds it. By inspection, the drive clock suffers from a similar problem, so has never worked properly either. This error has propagated across the 32-bit DTs too, so fix those up. Fixes: 187d7967a5ee ("ARM: dts: rockchip: add the sdio/sdmmc node for rk3036") Fixes: faea098e1808 ("ARM: dts: rockchip: add core rk3036 dtsi") Fixes: 9848ebeb952d ("ARM: dts: rockchip: add core rk3228 dtsi") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-02-12ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf nodeShawn Lin1-1/+1
rockchip,rk3228-grf is used both for rk3228 and rk3229. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-10-10ARM: dts: rockchip: fix mali400 ppmmu interrupt namesHeiko Stuebner1-2/+2
The interrupts were wrongly named as ppXmmu while the binding specifies them as ppmmuX. Fix that for the recently added Utgard mali nodes on Rockchip socs. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-09-22ARM: dts: rockchip: add rk322x gpu nodeHeiko Stuebner1-0/+21
The rk3228/3229 uses a Mali400 GPU with two pixel processors. This adds the core node for it, which can be enabled in board devicetrees. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-21ARM: dts: rockchip: add rk322x iommu nodesSimon Xue1-0/+36
Add VPU/VDEC/VOP/IEP iommu nodes Signed-off-by: Simon Xue <xxm@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-06ARM: dts: rockchip: add spi node and spi pinctrl on rk3228/rk3229Huibin Hong1-0/+50
Add spi node and spi pinctrl for rk322x Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-17ARM: dts: rockchip: add efuse device node for rk3228Finley Xiao1-0/+17
Add a efuse node in the device tree for the rk3228 SoC. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: add sdmmc and sdio nodes for rk3228 SoCShawn Lin1-0/+60
This patch adds sdmmc/sdio controller nodes for rk3228 SoC. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: fix compatible string for eMMC node of rk3228 SoCShawn Lin1-1/+1
This adds amend compatible content for eMMC of RK3228 SoC. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: add cpu enable method for rk3228 SoCFrank Wang1-0/+9
This patch sets PSCI as the default cpu enable-method for RK3228 SoC. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: remove num-slots from all platformsShawn Lin1-1/+0
We deprecated the "num-slots" property now and plan to get rid of it finally. Just move a step to cleanup it from DT. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: Add io-domain node for rk3228David Wu1-0/+5
This patch adds io-domain support for rk3228 SoC. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-07-16ARM: dts: rockchip: add rk322x spdif nodeSugar Zhang1-0/+19
This patch add spdif node for rk322x. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.