aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/configs/sama5_defconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-29ARM: defconfig: reorder defconfig filesArnd Bergmann1-3/+3
The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-22ARM: refresh defconfig filesArnd Bergmann1-4/+4
A lot of Kconfig options have changed over the years, and we tend to not do a blind 'make defconfig' to refresh the files, to ensure we catch options that should not have gone away. I used some a bit of scripting to only rework the bits where an option moved around in any of the defconfig files, without also dropping any of the other lines, to make it clearer which options we no longer have. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06ARM: configs: at91: Enable AUTOFS_FS required by systemdNicolas Ferre1-0/+1
Align all at91 defconfigs to required options for systemd. The missing of autofs would cause warnings on boot when not available. Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2022-05-06ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FSTudor Ambarus1-1/+1
Using mtdblock on raw flashes is generally a bad idea as it lacks wear-leveling, bad block handling or power-cut management. What happens when you use mtdblock and you change any sector of your mtdblockX device, is that it reads the whole corresponding eraseblock into the memory, erases the eraseblock, changes the sector in RAM, and writes the whole eraseblock back. If you have a power failure when the eraseblock is being erased, you lose all the block device sectors in it. The flash will likely decay soon because the eraseblocks will wear out. Remove this archaic tool as its use case should rather be only for debug purposes. This means that write-capable block file systems like ext2, ext3, FAT, etc. will no longer be addressed with at91 defconfigs. For read only block filesystems like SquashFS, use MTD_UBI_BLOCK instead and benefit of UBI's bit-flip handling and wear-levelling. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220420134740.193563-1-tudor.ambarus@microchip.com
2021-12-17ARM: configs: at91: Enable crypto software implementationsTudor Ambarus1-0/+8
Enable at least the same amount of algs as the hardware IPs are supporting so that they are able to fallback to the software implementations in case they need it. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211215134311.304427-1-tudor.ambarus@microchip.com
2021-09-20ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDPDouglas Anderson1-0/+1
In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we will split the PANEL_SIMPLE driver in two. By default let's give everyone who had the old driver enabled the new driver too. If folks want to opt-out of one or the other they always can later. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
2021-03-29ARM: configs: at91: Modernize UBI defconfig partNicolas Ferre1-1/+1
UBI_GLUEBI is not so common and UBI_FASTMAP is used for several years. Make them part of a modernization of UBI defconfig options. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: Add USB Video webcam classNicolas Ferre1-0/+2
USB webcams are used during validation process, add them as modules. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: Add mtd tests as modulesNicolas Ferre1-0/+1
Add MTD tests as they are used in CI and for validation plan. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: Add audio MIKROE PROTO boardCodrin Ciubotariu1-0/+1
Add this board as a module as it's useful for testing audio on multiple AT91 boards. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> [nicolas.ferre@microchip.com: adap to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: Enable LAN78XX as moduleRazvan Stefanescu1-0/+1
Include this driver as the USB-Ethernet chip is present on SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> [nicolas.ferre@microchip.com: update commit subject and message] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: PIOBU as built-inRazvan Stefanescu1-1/+1
Include as built-in as it's used by multiple boards. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> [nicolas.ferre@microchip.com: adap to newer kernel] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: MCP16502 regulator as built-inNicolas Ferre1-1/+1
This regulator is needed by several SoC or external peripherals on different boards, providing required power rails. Make it built-in to match usual use-cases. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-03-29ARM: configs: at91: sama5: enable the Hantro G1 engineEmil Velikov1-0/+3
The SoC features a Hantro G1 compatible engine. Enable it by default, so people can make use of it. Keep it a module, as suggested by Nicolas Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-11-emil.l.velikov@gmail.com
2021-03-29ARM: configs: at91: sama5: update with savedefconfigEmil Velikov1-19/+18
While enabling an extra config, I've noticed that savedefconfig produced a notable delta. Split out the no-op changes for clarity sake. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210311154055.3496076-10-emil.l.velikov@gmail.com
2021-02-08ARM: configs: sama5_defconfig: add QSPI driverNicolas Ferre1-0/+1
Add Quad SPI driver to the sama5 defconfig. This driver is needed for sama5d2 SoC. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2021-02-05ARM: configs: at91: DT/ATAG defconfig modificationsNicolas Ferre1-1/+1
As all AT91 platforms are converted to DT for a long time, adapt the defconfigs by: - removing legacy CONFIG_ATAGS as a DT will always be provided; - removing the CONFIG_ARM_APPENDED_DTB option on SAMA5 devices as the vast majority of systems will use a DT-aware bootloader on these devices. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-02-05ARM: configs: sama5_defconfig: update and remove unneeded optionsNicolas Ferre1-11/+0
Kconfig options are not present anymore or selected by default: remove them from sama5_defconfig. No change to kernel compilation expected. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
2021-01-02ARM: configs: at91: remove ATMEL_TCLIBAlexandre Belloni1-1/+0
The driver is gone, stop selecting it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201228204620.2678264-1-alexandre.belloni@bootlin.com
2020-12-08ARM: configs: drop unused BACKLIGHT_GENERIC optionAndrey Zhizhikin1-1/+0
Commit 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") removed geenric_bl driver from the tree, together with corresponding config option. Remove BACKLIGHT_GENERIC config item from all ARM configurations. Fixes: 7ecdea4a0226 ("backlight: generic_bl: Remove this driver as it is unused") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20201201222922.3183-2-andrey.zhizhikin@leica-geosystems.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-28ARM: configs: at91: sama5: resync with media changesEugen Hristev1-0/+9
The media tree Kconfig has changed recently, and a lot of modules were built unintentionally, like the dvb frontends and encoders. Resync the defconfig to build the sama5 drivers and tested sensors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
2020-08-07Merge tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds1-2/+0
Pull media updates from Mauro Carvalho Chehab: - Legacy soc_camera driver was removed from staging - New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20 - TI vpe driver code was re-organized and had new features added - Added Xilinx MIPI CSI-2 Rx Subsystem driver - Added support for Infrared Toy and IR Droid devices - Lots of random driver fixes, new features and cleanups * tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits) media: camss: fix memory leaks on error handling paths in probe media: davinci: vpif_capture: fix potential double free media: radio: remove redundant assignment to variable retval media: allegro: fix potential null dereference on header media: mtk-mdp: Fix a refcounting bug on error in init media: allegro: fix an error pointer vs NULL check media: meye: fix missing pm_mchip_mode field media: cafe-driver: use generic power management media: saa7164: use generic power management media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP media: v4l2: Correct kernel-doc inconsistency media: v4l2: Correct kernel-doc inconsistency media: dvbdev.h: keep * together with the type media: v4l2-subdev.h: keep * together with the type media: videobuf2: Print videobuf2 buffer state by name media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description media: tw68: use generic power management media: meye: use generic power management media: cx88: use generic power management media: cx25821: use generic power management ...
2020-07-25ARM: configs: at91: sama5: enable CAN PLATFORM driverCristian Birsan1-0/+1
CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms after the driver was split into multiple files. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
2020-07-25ARM: configs: at91: sama5: enable bridge and VLAN filteringRazvan Stefanescu1-0/+3
These modules are needed to configure bridges in Linux, to take full advantage of the KSZ switch capabilities. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
2020-07-25ARM: configs: at91: sama5: add support for KSZ ethernet switchesRazvan Stefanescu1-0/+3
Enable DSA and KSZ9477 support as modules. Ethernet switches are used by the SAMA5D2-ICP board. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
2020-07-04media: arch/arm/configs: remove obsolete CONFIG_SOC_CAMERA*Hans Verkuil1-2/+0
Drop all configs with the CONFIG_SOC_CAMERA prefix since those have been removed. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-26ARM: configs: at91: sama5: Enable CLASSDCodrin Ciubotariu1-0/+1
CLASSD is present on SAMA5d2 SoCs. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200618154147.687878-1-codrin.ciubotariu@microchip.com
2020-04-13ARM: configs: at91: sama5: enable MCP16502 regulatorRazvan Stefanescu1-0/+1
Driver is built as a module. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Link: https://lore.kernel.org/r/20200325102223.24827-2-eugen.hristev@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-04-13ARM: configs: at91: sama5: enable SAMA5D2_PIOBURazvan Stefanescu1-0/+1
Driver is enabled as a module. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Link: https://lore.kernel.org/r/20200325102223.24827-1-eugen.hristev@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-02-09ARM: configs: Cleanup old Kconfig optionsKrzysztof Kozlowski1-3/+0
CONFIG_MMC_BLOCK_BOUNCE is gone since commit c3dccb74be28 ("mmc: core: Delete bounce buffer Kconfig option"). CONFIG_LBDAF is gone since commit 72deb455b5ec ("block: remove CONFIG_LBDAF"). CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be now enabled by default (along with MQ_IOSCHED_KYBER). The IOSCHED_BFQ seems to replace IOSCHED_CFQ so select it in configs previously choosing the latter. CONFIG_CROSS_COMPILE is gone since commit f1089c92da79 ("kbuild: remove CONFIG_CROSS_COMPILE support"). Link: https://lore.kernel.org/r/20200130195525.4525-2-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-14ARM: configs: at91: unselect PITAlexandre Belloni1-0/+1
The PIT is not required anymore to successfully boot and may actually harm in case preempt-rt is used because the PIT interrupt is shared. Disable it so the TCB clocksource is used. Link: https://lore.kernel.org/r/20191009194814.15034-1-alexandre.belloni@bootlin.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-06-19ARM: configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski1-1/+0
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19ARM: config: Remove left-over BACKLIGHT_LCD_SUPPORTKrzysztof Kozlowski1-1/+0
The CONFIG_BACKLIGHT_LCD_SUPPORT was removed in commit 8c5dc8d9f19c ("video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol"). Options protected by CONFIG_BACKLIGHT_LCD_SUPPORT are now available directly. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-16Merge tag 'at91-5.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/lateOlof Johansson1-1/+1
AT91 defconfig for 5.2 - ov2640 driver as module - selecting HAVE_FB_ATMEL for SAMA5 SoCs is useless * tag 'at91-5.2-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: sama5: make ov2640 as a module ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-18ARM: at91: sama5: make ov2640 as a moduleTudor Ambarus1-1/+1
OV2640 is a detachable camera that we use to test the Image Sensor Interface. Make it as a module, it will reduce the kernel image size. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal1-1/+1
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-30ARM: configs: at91: Add I2S driver to sama5Codrin Ciubotariu1-0/+1
Add I2S CONFIG_SND_ATMEL_SOC_I2S to sama5_defconfig. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-30ARM: configs: at91: add generic resistive touchscreen to sama5Eugen Hristev1-0/+1
Add generic resistive touchscreen CONFIG_TOUCHSCREEN_ADC to sama5_defconfig Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-01-24irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUGMarc Zyngier1-1/+0
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS, just with less information. Spring cleanup time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com> Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
2017-06-23Merge tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfigArnd Bergmann1-1/+0
Pull "ARM defconfig cleanup" from Krzysztof Kozłowski: 1. Remove old Kconfig options from all ARM configs, 2. Update Samsung defconfigs to bring back options over time got disabled for some reason (configs were not updated along with the code), 3. Save defconfigs for Samsung. * tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: tct_hammer_defconfig: Save defconfig ARM: s5pv210_defconfig: Save defconfig ARM: s3c6400_defconfig: Save defconfig ARM: mini2440_defconfig: Save defconfig ARM: s3c2410_defconfig: Save defconfig ARM: exynos_defconfig: Save defconfig ARM: s5pv210_defconfig: Bring back lost (but wanted) options ARM: s3c6400_defconfig: Bring back lost (but wanted) options ARM: s3c2410_defconfig: Bring back lost (but wanted) options ARM: tct_hammer_defconfig: Bring back lost (but wanted) options ARM: mini2440_defconfig: Bring back lost (but wanted) options ARM: defconfig: samsung: Re-order entries to match savedefconfig ARM: defconfig: Cleanup from old Kconfig options
2017-06-10ARM: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski1-1/+0
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - INET_LRO: commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"); - MTD_CONCAT: commit f53fdebcc3e1 ("mtd: drop MTD_CONCAT from Kconfig entirely"); - MTD_PARTITIONS: commit 6a8a98b22b10 ("mtd: kill CONFIG_MTD_PARTITIONS"); - MTD_CHAR: commit 660685d9d1b4 ("mtd: merge mtdchar module with mtdcore"); - NETDEV_1000 and NETDEV_10000: commit f860b0522f65 ("drivers/net: Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with just ETHERNET but that is separate change; - INOTIFY: commit 2dfc1cae4c42 ("inotify: remove inotify in kernel interface"); - MISC_DEVICES: commit 7c5763b8453a ("drivers: misc: Remove MISC_DEVICES config option"); - HID_SUPPORT: commit 1f41a6a99476 ("HID: Fix the generic Kconfig options"); - BT_L2CAP and BT_SCO: commit f1e91e1640d8 ("Bluetooth: Always compile SCO and L2CAP in Bluetooth Core"); - DEBUG_ERRORS: commit b025a3f836d1 ("ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS"); - USB_DEVICE_CLASS: commit 007bab91324e ("USB: remove CONFIG_USB_DEVICE_CLASS"); - RCU_CPU_STALL_DETECTOR: commit a00e0d714fbd ("rcu: Remove conditional compilation for RCU CPU stall warnings"); - SYSCTL_SYSCALL_CHECK: commit 7c60c48f58a7 ("sysctl: Improve the sysctl sanity checks"); - IP_NF_QUEUE: commit 3dd6664fac7e ("netfilter: remove unused "config IP_NF_QUEUE""); - IP_NF_TARGET_ULOG: commit d4da843e6fad ("netfilter: kill remnants of ulog targets"); - IP6_NF_QUEUE: commit d16cf20e2f2f ("netfilter: remove ip_queue support"); - IP6_NF_TARGET_LOG: commit 6939c33a757b ("netfilter: merge ipt_LOG and ip6_LOG into xt_LOG"); - USB_LED: commit a335aaf3125c ("usb: misc: remove outdated USB LED driver"); - MMC_UNSAFE_RESUME: commit 2501c9179dff ("mmc: core: Use MMC_UNSAFE_RESUME as default behavior"); - AUTOFS_FS: commit 561c5cf9236a ("staging: Remove autofs3"); - DISPLAY_SUPPORT: commit 5a6b5e02d673 ("fbdev: remove display subsystem"); - CFG80211_REG_DEBUG: commit c799ba6eab7a ("cfg80211: remove CFG80211_REG_DEBUG"); - VIDEO_OUTPUT_CONTROL: commit f167a64e9d67 ("video / output: Drop display output class support"); - USB_LIBUSUAL: commit f61870ee6f8c ("usb: remove libusual"); - CRYPTO_ZLIB: commit 110492183c4b ("crypto: compress - remove unused pcomp interface"); - BLK_DEV_UB: commit 68a5059ecf82 ("block: remove the deprecated ub driver"); Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> [for vexpress] Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-05-15ARM: configs: at91: add MCAN driver to sama5_defconfigWenyou Yang1-0/+1
Add the Controller Area Network (MCAN) driver compilation for sama5 default configuration. Is used by sama5d2 SoC for instance. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-15ARM: configs: at91: enable HIGH_RES_TIMERSQuentin Schulz1-0/+1
This enables by default the high resolution timers on sama5d2 platforms. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-15ARM: configs: at91: make system tickless when idleQuentin Schulz1-0/+1
This makes Atmel sama5 platforms' system tickless when idle. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10ARM: sama5_defconfig: add support for the Axentia TSE-850 boardPeter Rosin1-1/+6
The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-01ARM: at91/defconfig: Add ACT8945A driverWenyou Yang1-0/+3
Include ACT8945A mfd, regulator and power drivers. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-10ARM: at91/defconfig: sama5: add CONFIG_FHANDLENicolas Ferre1-0/+1
CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So explicitly enable it to allow easy use of systemd userspace. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-06ARM: at91: sama5: Update defconfigMarek Vasut1-0/+1
Enable CGROUPS support, so we can boot userspace that uses systemd on top of kernel configured using this defconfig. The systemd userspace depends on cgroups and without them, it dies in mysterious ways. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27ARM: at91/defconfig: add PDMIC driver to sama5_defconfigNicolas Ferre1-0/+1
Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation for sama5 default configuration. Is used by sama5d2 SoC for instance. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27ARM: at91/defconfig: add HLCDC driver to sama5_defconfigNicolas Ferre1-2/+7
Add the LCD DRM driver with all its dependencies: - the MFD driver - the backlight PWM - the simple panel driver Remove the CONFIG_FB as it is not needed on any sama5 device. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.