aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/include/asm/dma-mapping.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-07-07ARM/dma-mapping: use dma-direct unconditionallyChristoph Hellwig1-24/+0
Use dma-direct unconditionally on arm. It has already been used for some time for LPAE and nommu configurations. This mostly changes the streaming mapping implementation and the (simple) coherent allocator for device that are DMA coherent. The existing complex allocator for uncached mappings for non-coherent devices is still used as is using the arch_dma_alloc/arch_dma_free hooks. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andre Przywara <andre.przywara@arm.com> [highbank] Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07ARM/dma-mapping: mark various dma-mapping routines static in dma-mapping.cChristoph Hellwig1-75/+0
With the dmabounce removal these aren't used outside of dma-mapping.c, so mark them static. Move the dma_map_ops declarations down a bit to avoid lots of forward declarations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marc Zyngier <maz@kernel.org>
2022-07-07ARM/dma-mapping: remove dmabounceChristoph Hellwig1-29/+0
Remove the now unused dmabounce code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2020-10-06dma-mapping: move dma-debug.h to kernel/dma/Christoph Hellwig1-1/+0
Most of dma-debug.h is not required by anything outside of kernel/dma. Move the four declarations needed by dma-mappin.h or dma-ops providers into dma-mapping.h and dma-map-ops.h, and move the remainder of the file to kernel/dma/debug.h. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-17ARM/dma-mapping: move various helpers from dma-mapping.h to dma-direct.hChristoph Hellwig1-50/+0
Move the helpers to translate to and from direct mapping DMA addresses to dma-direct.h. This not only is the most logical place, but the new placement also avoids dependency loops with pending commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2020-09-17ARM/dma-mapping: remove dma_to_virtChristoph Hellwig1-17/+1
dma_to_virt is entirely unused, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-17ARM/dma-mapping: remove a __arch_page_to_dma #errorChristoph Hellwig1-4/+0
The __arch_page_to_dma hook is long gone. Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-09-11xen/arm: use dev_is_dma_coherentChristoph Hellwig1-6/+0
Use the dma-noncoherent dev_is_dma_coherent helper instead of the home grown variant. Note that both are always initialized to the same value in arch_setup_dma_ops. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-07-24arm: use swiotlb for bounce buffering on LPAE configsChristoph Hellwig1-1/+3
The DMA API requires that 32-bit DMA masks are always supported, but on arm LPAE configs they do not currently work when memory is present above 4GB. Wire up the swiotlb code like for all other architectures to provide the bounce buffering in that case. Fixes: 21e07dba9fb11 ("scsi: reduce use of block bounce buffers"). Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-07-10dma-mapping: remove dma_max_pfnChristoph Hellwig1-7/+0
These days, the DMA mapping code must bounce buffers for any unsupported address. If the driver needs to optimize for natively supported ranges, then it should use dma_get_required_mask. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-13dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availabilityChristoph Hellwig1-5/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-02-13dma-mapping: add a kconfig symbol for arch_setup_dma_ops availabilityChristoph Hellwig1-4/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2018-12-13dma-mapping: bypass indirect calls for dma-directChristoph Hellwig1-1/+1
Avoid expensive indirect calls in the fast path DMA mapping operations by directly calling the dma_direct_* ops if we are using the directly mapped DMA operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com>
2018-09-08arm-nommu: don't define arch_teardown_dma_opsChristoph Hellwig1-0/+2
We can just use the default implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-01-15dma-direct: rename dma_noop to dma_directChristoph Hellwig1-1/+1
The trivial direct mapping implementation already does a virtual to physical translation which isn't strictly a noop, and will soon learn to do non-direct but linear physical to dma translations through the device offset and a few small tricks. Rename it to a better fitting name. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2018-01-10dma-mapping: move dma_mark_clean to dma-direct.hChristoph Hellwig1-2/+0
And unlike the other helpers we don't require a <asm/dma-direct.h> as this helper is a special case for ia64 only, and this keeps it as simple as possible. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-01-10dma-mapping: move swiotlb arch helpers to a new headerChristoph Hellwig1-31/+0
phys_to_dma, dma_to_phys and dma_capable are helpers published by architecture code for use of swiotlb and xen-swiotlb only. Drivers are not supposed to use these directly, but use the DMA API instead. Move these to a new asm/dma-direct.h helper, included by a linux/dma-direct.h wrapper that provides the default linear mapping unless the architecture wants to override it. In the MIPS case the existing dma-coherent.h is reused for now as untangling it will take a bit of work. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Robin Murphy <robin.murphy@arm.com>
2017-11-16Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-7/+0
Pull ARM updates from Russell King: - add support for ELF fdpic binaries on both MMU and noMMU platforms - linker script cleanups - support for compressed .data section for XIP images - discard memblock arrays when possible - various cleanups - atomic DMA pool updates - better diagnostics of missing/corrupt device tree - export information to allow userspace kexec tool to place images more inteligently, so that the device tree isn't overwritten by the booting kernel - make early_printk more efficient on semihosted systems - noMMU cleanups - SA1111 PCMCIA update in preparation for further cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits) ARM: 8719/1: NOMMU: work around maybe-uninitialized warning ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" ARM: 8713/1: NOMMU: Support MPU in XIP configuration ARM: 8712/1: NOMMU: Use more MPU regions to cover memory ARM: 8711/1: V7M: Add support for MPU to M-class ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE ARM: 8709/1: NOMMU: Disallow MPU for XIP ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers ARM: 8706/1: NOMMU: Move out MPU setup in separate module ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel() ARM: 8705/1: early_printk: use printascii() rather than printch() ARM: 8703/1: debug.S: move hexbuf to a writable section ARM: add additional table to compressed kernel ARM: decompressor: fix BSS size calculation pcmcia: sa1111: remove special sa1111 mmio accessors pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources ARM: better diagnostics with missing/corrupt dtb ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size() ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init ..
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-28ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size()Vladimir Murzin1-7/+0
There are no users of init_dma_coherent_pool_size() left due to 387870f ("mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls"), so remove it. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-06-30ARM: NOMMU: Introduce dma operations for noMMUVladimir Murzin1-1/+1
R/M classes of cpus can have memory covered by MPU which in turn might configure RAM as Normal i.e. bufferable and cacheable. It breaks dma_alloc_coherent() and friends, since data can stuck in caches now or be buffered. This patch factors out DMA support for NOMMU configuration into separate entity which provides dedicated dma_ops. We have to handle there several cases: - configurations with MMU/MPU setup - configurations without MMU/MPU setup - special case for M-class, since caches and MPU there are optional In general we rely on default DMA area for coherent allocations or/and per-device memory reserves suitable for coherent DMA, so if such regions are set coherent allocations go from there. In case MMU/MPU was not setup we fallback to normal page allocator for DMA memory allocation. In case we run M-class cpus, for configuration without cache support (like Cortex-M3/M4) dma operations are forced to be coherent and wired with dma-noop (such decision is made based on cacheid global variable); however, if caches are detected there and no DMA coherent region is given (either default or per-device), dma is disallowed even MPU is not set - it is because M-class implement system memory map which defines part of address space as Normal memory. Reported-by: Alexandre Torgue <alexandre.torgue@st.com> Reported-by: Andras Szemzo <sza@esh.hu> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Andras Szemzo <sza@esh.hu> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> [hch: removed the dma_supported() implementation that isn't required anymore] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-28arm: remove arch specific dma_supported implementationChristoph Hellwig1-3/+0
And instead wire it up as method for all the dma_map_ops instances. Note that the code seems a little fishy for dmabounce and iommu, but for now I'd like to preserve the existing behavior 1:1. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-28arm: implement ->mapping_errorChristoph Hellwig1-1/+0
DMA_ERROR_CODE is going to go away, so don't rely on it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-02xen/arm,arm64: fix xen_dma_ops after 815dd18 "Consolidate get_dma_ops..."Stefano Stabellini1-11/+1
The following commit: commit 815dd18788fe0d41899f51b91d0560279cf16b0d Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Fri Jan 20 13:04:04 2017 -0800 treewide: Consolidate get_dma_ops() implementations rearranges get_dma_ops in a way that xen_dma_ops are not returned when running on Xen anymore, dev->dma_ops is returned instead (see arch/arm/include/asm/dma-mapping.h:get_arch_dma_ops and include/linux/dma-mapping.h:get_dma_ops). Fix the problem by storing dev->dma_ops in dev_archdata, and setting dev->dma_ops to xen_dma_ops. This way, xen_dma_ops is returned naturally by get_dma_ops. The Xen code can retrieve the original dev->dma_ops from dev_archdata when needed. It also allows us to remove __generic_dma_ops from common headers. Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Julien Grall <julien.grall@arm.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> [4.11+] CC: linux@armlinux.org.uk CC: catalin.marinas@arm.com CC: will.deacon@arm.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Julien Grall <julien.grall@arm.com>
2017-01-24treewide: Consolidate get_dma_ops() implementationsBart Van Assche1-2/+2
Introduce a new architecture-specific get_arch_dma_ops() function that takes a struct bus_type * argument. Add get_dma_ops() in <linux/dma-mapping.h>. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24treewide: Consolidate set_dma_ops() implementationsBart Van Assche1-6/+0
Now that all set_dma_ops() implementations are identical (ignoring BUG_ON() statements), remove the architecture specific definitions and add a definition in <linux/dma-mapping.h>. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: Paul Mackerras <paulus@samba.org> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24treewide: Move dma_ops from struct dev_archdata into struct deviceBart Van Assche1-3/+3
Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-5/+5
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-29ARM: 8617/1: dma: fix dma_max_pfn()Roger Quadros1-1/+1
Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski1-7/+6
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-2/+0
Pull ARM updates from Russell King: "Changes included in this pull request: - revert pxa2xx-flash back to using ioremap_cached() and switch memremap() to use arch_memremap_wb() - remove pci=firmware command line argument handling - remove unnecessary arm_dma_set_mask() implementation, the generic implementation will do for ARM - removal of the ARM kallsyms "hack" to work around mode switching veneers and vectors located below PAGE_OFFSET - tidy up build system output a little - add L2 cache power management DT bindings - remove duplicated local_irq_disable() in reboot paths - handle AMBA primecell devices better at registration time with PM domains (needed for Samsung SoCs) - ARM specific preparation to support Keystone II kexec" * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings ARM: 8569/1: pl2x0: Add OF control of cache power management ARM: 8568/1: reboot: remove duplicated local_irq_disable() ARM: 8566/1: drivers: amba: properly handle devices with power domains ARM: provide arm_has_idmap_alias() helper ARM: kexec: remove 512MB restriction on kexec crashdump ARM: provide improved virt_to_idmap() functionality ARM: kexec: fix crashkernel= handling ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets ARM: 8562/1: suppress "include/generated/mach-types.h is up to date." ARM: 8553/1: kallsyms: remove --page-offset command line option ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM ARM: 8555/1: kallsyms: ignore ARM mode switching veneers ARM: 8548/1: dma-mapping: remove arm_dma_set_mask() ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling ARM: memremap: implement arch_memremap_wb() memremap: add arch specific hook for MEMREMAP_WB mappings mtd: pxa2xx-flash: switch back from memremap to ioremap_cached ARM: reintroduce ioremap_cached() for creating cached I/O mappings
2016-05-09iommu: of: enforce const-ness of struct iommu_opsRobin Murphy1-1/+1
As a set of driver-provided callbacks and static data, there is no compelling reason for struct iommu_ops to be mutable in core code, so enforce const-ness throughout. Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07ARM: 8548/1: dma-mapping: remove arm_dma_set_mask()Alexandre Courbot1-2/+0
arm_dma_set_mask() implements exactly the same behavior as the fallback that dma_set_mask() takes if the set_dma_mask op is not set. Remove it and use that fallback instead like what is already done for dma_get_mask(). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-20dma-mapping: always provide the dma_map_ops based implementationChristoph Hellwig1-7/+0
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_set_maskChristoph Hellwig1-5/+0
Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_supportedChristoph Hellwig1-3/+3
Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: cosolidate dma_mapping_errorChristoph Hellwig1-9/+0
Currently there are three valid implementations of dma_mapping_error: (1) call ->mapping_error (2) check for a hardcoded error code (3) always return 0 This patch provides a common implementation that calls ->mapping_error if present, then checks for DMA_ERROR_CODE if defined or otherwise returns 0. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_{alloc,free}_noncoherentChristoph Hellwig1-15/+6
Most architectures do not support non-coherent allocations and either define dma_{alloc,free}_noncoherent to their coherent versions or stub them out. Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips implements them directly. This patch moves the Openrisc version to common code, and handles the DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance. Note that actual non-coherent allocations require a dma_cache_sync implementation, so if non-coherent allocations didn't work on an architecture before this patch they still won't work after it. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}Christoph Hellwig1-29/+0
Since 2009 we have a nice asm-generic header implementing lots of DMA API functions for architectures using struct dma_map_ops, but unfortunately it's still missing a lot of APIs that all architectures still have to duplicate. This series consolidates the remaining functions, although we still need arch opt outs for two of them as a few architectures have very non-standard implementations. This patch (of 5): The coherent DMA allocator works the same over all architectures supporting dma_map operations. This patch consolidates them and converges the minor differences: - the debug_dma helpers are now called from all architectures, including those that were previously missing them - dma_alloc_from_coherent and dma_release_from_coherent are now always called from the generic alloc/free routines instead of the ops dma-mapping-common.h always includes dma-coherent.h to get the defintions for them, or the stubs if the architecture doesn't support this feature - checks for ->alloc / ->free presence are removed. There is only one magic instead of dma_map_ops without them (mic_dma_ops) and that one is x86 only anyway. Besides that only x86 needs special treatment to replace a default devices if none is passed and tweak the gfp_flags. An optional arch hook is provided for that. [linux@roeck-us.net: fix build] [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-18ARM: 8419/1: dma-mapping: harmonize definition of DMA_ERROR_CODEMarek Szyprowski1-1/+1
All architectures except arm that define DMA_ERROR_CODE are casting it to (dma_addr_t) - as it is always compared to dma_addr_t in arm as well this could be harmonized. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-12-16Merge tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-7/+6
Pull ARM SoC/iommu configuration update from Arnd Bergmann: "The iomm-config branch contains work from Will Deacon, quoting his description: This series adds automatic IOMMU and DMA-mapping configuration for OF-based DMA masters described using the generic IOMMU devicetree bindings. Although there is plenty of future work around splitting up iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU group creation for the platform_bus, this is already useful enough for people to port over their IOMMU drivers and start using the new probing infrastructure (indeed, Marek has patches queued for the Exynos IOMMU). The branch touches core ARM and IOMMU driver files, and the respective maintainers (Russell King and Joerg Roedel) agreed to have the contents merged through the arm-soc tree. The final version was ready just before the merge window, so we ended up delaying it a bit longer than the rest, but we don't expect to see regressions because this is just additional infrastructure that will get used in drivers starting in 3.20 but is unused so far" * tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu: store DT-probed IOMMU data privately arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops arm: call iommu_init before of_platform_populate dma-mapping: detect and configure IOMMU in of_dma_configure iommu: fix initialization without 'add_device' callback iommu: provide helper function to configure an IOMMU for an of master iommu: add new iommu_ops callback for adding an OF device dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops iommu: provide early initialisation hook for IOMMU drivers
2014-12-04arm: introduce is_device_dma_coherentStefano Stabellini1-0/+7
Introduce a boolean flag and an accessor function to check whether a device is dma_coherent. Set the flag from set_arch_dma_coherent_ops. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2014-12-01arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_opsWill Deacon1-7/+5
This patch plumbs the existing ARM IOMMU DMA infrastructure (which isn't actually called outside of a few drivers) into arch_setup_dma_ops, so that we can use IOMMUs for DMA transfers in a more generic fashion. Since this significantly complicates the arch_setup_dma_ops function, it is moved out of line into dma-mapping.c. If CONFIG_ARM_DMA_USE_IOMMU is not set, the iommu parameter is ignored and the normal ops are used instead. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-12-01dma-mapping: detect and configure IOMMU in of_dma_configureWill Deacon1-1/+3
This patch extends of_dma_configure so that it sets up the IOMMU for a device, as well as the coherent/non-coherent DMA mapping ops. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-12-01dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_opsWill Deacon1-4/+4
set_arch_dma_coherent_ops is called from of_dma_configure in order to swizzle the architectural dma-mapping functions over to a cache-coherent implementation. This is currently implemented only for ARM. In anticipation of re-using this mechanism for IOMMU-backed dma-mapping ops too, this patch replaces the function with a broader arch_setup_dma_ops callback which will be extended in future. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-08-26dma-mapping: Provide write-combine allocationsThierry Reding1-16/+0
Provide an implementation for dma_{alloc,free,mmap}_writecombine() when the architecture supports DMA attributes. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-05-07ARM: dma: implement set_arch_dma_coherent_ops()Santosh Shilimkar1-0/+7
Implement the set_arch_dma_coherent_ops() for ARM architecture. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-05-07ARM: dma: Use dma_pfn_offset for dma address translationGrygorii Strashko1-1/+17
In most of cases DMA addresses can be performed using offset value of Bus address space relatively to physical address space as following: PFN->DMA: __pfn_to_phys(pfn + [-]dma_pfn_offset) DMA->PFN: __phys_to_pfn(dma_addr) + [-]dma_pfn_offset Thanks to Russell King for suggesting the optimised macro's for conversion. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Grant Likely <grant.likely@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-11-15Merge tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds1-1/+45
Pull Xen updates from Konrad Rzeszutek Wilk: "This has tons of fixes and two major features which are concentrated around the Xen SWIOTLB library. The short <blurb> is that the tracing facility (just one function) has been added to SWIOTLB to make it easier to track I/O progress. Additionally under Xen and ARM (32 & 64) the Xen-SWIOTLB driver "is used to translate physical to machine and machine to physical addresses of foreign[guest] pages for DMA operations" (Stefano) when booting under hardware without proper IOMMU. There are also bug-fixes, cleanups, compile warning fixes, etc. The commit times for some of the commits is a bit fresh - that is b/c we wanted to make sure we have the Ack's from the ARM folks - which with the string of back-to-back conferences took a bit of time. Rest assured - the code has been stewing in #linux-next for some time. Features: - SWIOTLB has tracing added when doing bounce buffer. - Xen ARM/ARM64 can use Xen-SWIOTLB. This work allows Linux to safely program real devices for DMA operations when running as a guest on Xen on ARM, without IOMMU support. [*1] - xen_raw_printk works with PVHVM guests if needed. Bug-fixes: - Make memory ballooning work under HVM with large MMIO region. - Inform hypervisor of MCFG regions found in ACPI DSDT. - Remove deprecated IRQF_DISABLED. - Remove deprecated __cpuinit. [*1]: "On arm and arm64 all Xen guests, including dom0, run with second stage translation enabled. As a consequence when dom0 programs a device for a DMA operation is going to use (pseudo) physical addresses instead machine addresses. This work introduces two trees to track physical to machine and machine to physical mappings of foreign pages. Local pages are assumed mapped 1:1 (physical address == machine address). It enables the SWIOTLB-Xen driver on ARM and ARM64, so that Linux can translate physical addresses to machine addresses for dma operations when necessary. " (Stefano)" * tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (32 commits) xen/arm: pfn_to_mfn and mfn_to_pfn return the argument if nothing is in the p2m arm,arm64/include/asm/io.h: define struct bio_vec swiotlb-xen: missing include dma-direction.h pci-swiotlb-xen: call pci_request_acs only ifdef CONFIG_PCI arm: make SWIOTLB available xen: delete new instances of added __cpuinit xen/balloon: Set balloon's initial state to number of existing RAM pages xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas. xen: remove deprecated IRQF_DISABLED x86/xen: remove deprecated IRQF_DISABLED swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary grant-table: call set_phys_to_machine after mapping grant refs arm,arm64: do not always merge biovec if we are running on Xen swiotlb: print a warning when the swiotlb is full swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device tracing/events: Fix swiotlb tracepoint creation swiotlb-xen: use xen_alloc/free_coherent_pages xen: introduce xen_alloc/free_coherent_pages ...
2013-11-08Merge remote-tracking branch 'stefano/swiotlb-xen-9.1' into stable/for-linus-3.13Konrad Rzeszutek Wilk1-1/+12
* stefano/swiotlb-xen-9.1: swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary grant-table: call set_phys_to_machine after mapping grant refs arm,arm64: do not always merge biovec if we are running on Xen swiotlb: print a warning when the swiotlb is full swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device swiotlb-xen: use xen_alloc/free_coherent_pages xen: introduce xen_alloc/free_coherent_pages arm64/xen: get_dma_ops: return xen_dma_ops if we are running as xen_initial_domain arm/xen: get_dma_ops: return xen_dma_ops if we are running as xen_initial_domain swiotlb-xen: introduce xen_swiotlb_set_dma_mask xen/arm,arm64: enable SWIOTLB_XEN xen: make xen_create_contiguous_region return the dma address xen/x86: allow __set_phys_to_machine for autotranslate guests arm/xen,arm64/xen: introduce p2m arm64: define DMA_ERROR_CODE arm: make SWIOTLB available Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Conflicts: arch/arm/include/asm/dma-mapping.h drivers/xen/swiotlb-xen.c [Conflicts arose b/c "arm: make SWIOTLB available" v8 was in Stefano's branch, while I had v9 + Ack from Russel. I also fixed up white-space issues]
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.