aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf533/boards/H8606.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-03-16arch: remove blackfin portArnd Bergmann1-452/+0
The Analog Devices Blackfin port was added in 2007 and was rather active for a while, but all work on it has come to a standstill over time, as Analog have changed their product line-up. Aaron Wu confirmed that the architecture port is no longer relevant, and multiple people suggested removing blackfin independently because of some of its oddities like a non-working SMP port, and the amount of duplication between the chip variants, which cause extra work when doing cross-architecture changes. Link: https://docs.blackfin.uclinux.org/ Acked-by: Aaron Wu <Aaron.Wu@analog.com> Acked-by: Bryan Wu <cooloney@gmail.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Mike Frysinger <vapier@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-12blackfin: cleanup board filesSteven Miao1-23/+23
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE) Signed-off-by: Steven Miao <realmz6@gmail.com>
2012-01-09blackfin: config: update macro SPI_BFIN in board fileSonic Zhang1-3/+3
Macro name for spi controller driver has been modified, so update default board file accordingly. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14Blackfin: add serial TX IRQ in individual platform resourceSonic Zhang1-1/+6
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips, so move the values to the platform resources. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-10-25Blackfin: H8606: fixup bogus ioresource initThomas Gleixner1-1/+2
IRQF_SHARED is not part of the IORESOURCE_IRQ bits. It's expressed by IORESOURCE_IRQ_SHAREABLE. IORESOURCE_IRQ_HIGHEDGE and IRQF_TRIGGER_HIGH are contradicting values, an interrupt can hardly be configured for both level and edge at the same time. This was introduced in commit 45138439(Blackfin arch: flash memory map and dm9000 resources updating) of course without any hint in the changelog what the heck this is supposed to do. Acked-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: boards: clean up redundant/dead spi resourcesMike Frysinger1-28/+0
The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: boards: add missing "static" to peripheral listsMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: H8606: move 8250 irqflags to platform resourcesMike Frysinger1-0/+2
Now that the common 8250 serial driver supports an "irqflags" field, we don't need to patch in a custom define into the code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: boards: update AD183x resourcesBarry Song1-4/+4
Make sure we use the right Kconfig names and platform strings. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: rename AD1836 to AD183X in board filesBarry Song1-2/+2
The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add UART/SPORT early platform resourcesSonic Zhang1-0/+15
This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move on-chip UART resources to boards filesSonic Zhang1-8/+39
Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: H8606/ip0x: drop redundant SPI ctl_reg settingsMike Frysinger1-2/+0
No need to set MSTR in .ctl_reg as the Blackfin SPI bus driver does this already for all parts. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: clean up bf537-lq035 board resourcesMichael Hennerich1-6/+0
Now that the driver has been updated, convert the board resources to the new i2c framework for managing slaves. For boards that don't actually hook up to this hardware, simply drop the resources altogether. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz1-27/+6
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: delete '-spi' suffix in ad1836/ad1938 driver nameBarry Song1-1/+1
The ASoC drivers have dropped the redundant "-spi" suffix in the driver name, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: drop board resources for dead devices (pbx/ad9960)Mike Frysinger1-26/+0
These hardware devices are dead and the drivers never cleaned up/merged, so punt the useless board resource info. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: convert boards to use platform data with smc91xMichael Hennerich1-0/+11
Latest smc91x driver allows you to specify settings in board resources rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li1-0/+5
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: rename some Blackfin driversMike Frysinger1-2/+2
Try to keep the naming conventions consistent, so: SPI_ADC_BF533 -> BFIN_SPI_ADC TWI_LCD -> BFIN_TWI_LCD Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-01-07Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang1-6/+18
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: flash memory map and dm9000 resources updatingJavier Herrero1-15/+19
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: remove pata resources from generic boardMike Frysinger1-1/+0
these are highly board specific, so putting into generic doesnt make much sense Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-05Blackfin arch: be consistant with parition names, and ensure the bus is identifiedRobin Getz1-3/+3
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-06-24DM9000: Fixup blackfin after removing 2 resource usageLaurent Pinchart1-1/+6
The dm9000 driver accepts either 2 or 3 resources to describe the platform devices. The 2 resources case abuses the ioresource mechanism by passing ioremap()ed memory through the platform device resources. This patch removes converts boards that were using it to the 3 resources scheme. CC: Bryan Wu <cooloney@kernel.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25[Blackfin] arch: add Blackfin on-chip SIR IrDA driver supportGraf Yang1-0/+23
- add platform device resources in board files - add new bfin_sir.h to each machines Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__Harvey Harrison1-1/+1
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-06Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik1-1/+1
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-27[Blackfin] arch: Added support for OpenCores Keyboard Controller to H8606 boardJavier Herrero1-0/+32
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Added support for 8250-class UARTs in HV Sistemas H8606 board, modification in 8250.c driver for correct compilation with BlackfinJavier Herrero1-2/+49
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17Blackfin arch: Typo: "CONFIG_RTC_BFIN_MODULE" -> "CONFIG_RTC_DRV_BFIN_MODULE"Robert P. J. Day1-1/+1
i'm *reasonably* confident that this is a typo that should be fixed. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: relocate linux/usb_isp1362.h to linux/usb/isp1362.h like in newer linux treesMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIOMike Frysinger1-4/+0
since we have this always turned on now and dont want it off (and hasnt been an option in a while) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: fix missing newline to fileMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12Blackfin arch: move hard coded pin_req to board fileBryan Wu1-0/+2
Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time - move this static things to the blackfin board file - add pin_req array to struct bfin5xx_spi_master - tested on BF537/BF548 with SPI flash Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: Added support for HV Sistemas H8606 boardJavier Herrero1-0/+345
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.