aboutsummaryrefslogtreecommitdiffstats
path: root/arch/microblaze/lib (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-05-02microblaze: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220430191122.8667-1-Julia.Lawall@inria.fr Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-04-21microblaze: Use simple memmove/memcpy implementation from lib/string.cMichal Simek2-43/+4
This is based on previous commit ("microblaze: Use simple memset implementation from lib/string.c") where generic memset implementation is used when OPT_LIB_FUNCTION is not defined. The same change can be done for memset/memcpy implementation where doesn't make sense to have generic implementation in architecture code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1f5cfc026a8a458f3e3134ab80f65bd4ac7e3e8e.1645797329.git.michal.simek@xilinx.com
2022-04-21microblaze: Do loop unrolling for optimized memset implementationMichal Simek1-1/+12
Align implementation with memcpy and memmove where also remaining bytes are copied via final switch case instead of using simple implementations which loop. But this alignment has much stronger reason and definitely aligning implementation is not the key point here. It is just good to have in mind that the same technique is used already there. In GCC 10, now -ftree-loop-distribute-patterns optimization is on at O2. This optimization causes GCC to convert the while loop in memset.c into a call to memset. So this optimization is transforming a loop in a memset/memcpy into a call to the function itself. This makes the memset implementation as recursive. "-freestanding" option will disable the built-in library function but it has been added in generic library implementation. In default microblaze kernel defconfig we have CONFIG_OPT_LIB_FUNCTION enabled so it will always pick optimized version of memset which is target specific so we are replacing the while() loop with switch case to avoid recursive memset call. Issue with freestanding was already discussed in connection to commit 33d0f96ffd73 ("lib/string.c: Use freestanding environment") and also this is topic in glibc and gcc. https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888 http://patchwork.ozlabs.org/project/glibc/patch/20191121021040.14554-1-sandra@codesourcery.com/ Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> Link: https://lore.kernel.org/r/10a432e269a6d3349cf458e4f5792522779cba0d.1645797329.git.michal.simek@xilinx.com
2022-04-21microblaze: Use simple memset implementation from lib/string.cMichal Simek1-18/+2
On microblaze systems which are not using OPT_LIB_FUNCTION only simple memset is used. This function is already implemented in lib/string.c that's why it should be used instead. This change is done in respect of issue fixed by commit 33d0f96ffd73 ("lib/string.c: Use freestanding environment") where gcc-10.x moved -ftree-loop-distribute-patterns optimization is to O2 optimization level. This optimization causes GCC to convert the while loop in memset.c into a call to memset. So This optimization is transforming a loop in a memset/memcpy into a call to the function itself. This makes the memset implementation as recursive. Based on fix above -ffreestanding was used and it needs to be used on Microblaze too but the patch is not adding this flag it removes simple implementation to cause that generic implementation is used where this flag is already setup. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mahesh Bodapati <mbodapat@xilinx.com> Link: https://lore.kernel.org/r/4a143e7654f72ee893dcea9769946e17d3570b16.1645797329.git.michal.simek@xilinx.com
2021-07-27microblaze: use generic strncpy/strnlen from_userArnd Bergmann1-90/+0
Remove the microblaze implemenation of strncpy/strnlen and instead use the generic versions. The microblaze version is fairly slow because it always does byte accesses even for aligned data, and it lacks a checks for user_addr_max(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-22microblaze: add 'fallthrough' to memcpy/memset/memmoveRandy Dunlap3-0/+11
Fix "fallthrough" warnings in microblaze memcpy/memset/memmove library functions. CC arch/microblaze/lib/memcpy.o ../arch/microblaze/lib/memcpy.c: In function 'memcpy': ../arch/microblaze/lib/memcpy.c:70:4: warning: this statement may fall through [-Wimplicit-fallthrough=] 70 | --c; ../arch/microblaze/lib/memcpy.c:71:3: note: here 71 | case 2: ../arch/microblaze/lib/memcpy.c:73:4: warning: this statement may fall through [-Wimplicit-fallthrough=] 73 | --c; ../arch/microblaze/lib/memcpy.c:74:3: note: here 74 | case 3: ../arch/microblaze/lib/memcpy.c:178:10: warning: this statement may fall through [-Wimplicit-fallthrough=] 178 | *dst++ = *src++; ../arch/microblaze/lib/memcpy.c:179:2: note: here 179 | case 2: ../arch/microblaze/lib/memcpy.c:180:10: warning: this statement may fall through [-Wimplicit-fallthrough=] 180 | *dst++ = *src++; ../arch/microblaze/lib/memcpy.c:181:2: note: here 181 | case 1: CC arch/microblaze/lib/memset.o ../arch/microblaze/lib/memset.c: In function 'memset': ../arch/microblaze/lib/memset.c:71:4: warning: this statement may fall through [-Wimplicit-fallthrough=] 71 | --n; ../arch/microblaze/lib/memset.c:72:3: note: here 72 | case 2: ../arch/microblaze/lib/memset.c:74:4: warning: this statement may fall through [-Wimplicit-fallthrough=] 74 | --n; ../arch/microblaze/lib/memset.c:75:3: note: here 75 | case 3: CC arch/microblaze/lib/memmove.o ../arch/microblaze/lib/memmove.c: In function 'memmove': ../arch/microblaze/lib/memmove.c:92:4: warning: this statement may fall through [-Wimplicit-fallthrough=] 92 | --c; ../arch/microblaze/lib/memmove.c:93:3: note: here 93 | case 2: ../arch/microblaze/lib/memmove.c:95:4: warning: this statement may fall through [-Wimplicit-fallthrough=] 95 | --c; ../arch/microblaze/lib/memmove.c:96:3: note: here 96 | case 1: ../arch/microblaze/lib/memmove.c:203:10: warning: this statement may fall through [-Wimplicit-fallthrough=] 203 | *--dst = *--src; ../arch/microblaze/lib/memmove.c:204:2: note: here 204 | case 3: ../arch/microblaze/lib/memmove.c:205:10: warning: this statement may fall through [-Wimplicit-fallthrough=] 205 | *--dst = *--src; ../arch/microblaze/lib/memmove.c:206:2: note: here 206 | case 2: ../arch/microblaze/lib/memmove.c:207:10: warning: this statement may fall through [-Wimplicit-fallthrough=] 207 | *--dst = *--src; ../arch/microblaze/lib/memmove.c:208:2: note: here 208 | case 1: Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Simek <monstr@monstr.eu> Link: https://lore.kernel.org/r/20210421022041.10689-1-rdunlap@infradead.org Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-22microblaze: Fix a typoBhaskar Chowdhury1-1/+1
s/storign/storing/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210319045323.21241-1-unixbhaskar@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-16microblaze: Setup dependencies for ASM optimized lib functionsMichal Simek1-4/+0
The patch: "microblaze: Setup proper dependency for optimized lib functions" (sha1: 7b6ce52be3f86520524711a6f33f3866f9339694) didn't setup all dependencies properly. Optimized lib functions in C are also present for little endian and optimized library functions in assembler are implemented only for big endian version. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman13-0/+13
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-18microblaze: Change libgcc-style functions from lib-y to obj-yDavid Holsgrove1-11/+3
Following precedence set by MIPs: "[MIPS] Change libgcc-style functions from lib-y to obj-y" (sha1: f7c2778151f32581ea9ec567d01d5d85209fcfe6), switch the goal definition for kbuild to obj-y to ensure object files linked in vmlinux if only modules were users of these functions. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Do not use module.h in files which are not modulesMichal Simek9-9/+9
Based on the patch: "lib: reduce the use of module.h wherever possible" (sha1: 8bc3bcc93a2b4e47d5d410146f6546bca6171663) fix all microblaze files which are not modules. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Fix coding style issuesMichal Simek5-11/+11
Fix coding style issues reported by checkpatch.pl. Signed-off-by: Michal Simek <monstr@monstr.eu>
2013-02-12microblaze: Fix strncpy_from_user macroMichal Simek1-5/+4
Problem happens when len in strncpy_from_user is setup and passing string has len-1 chars + \0 terminated character. In this case was returned incorrect length of the string. It should always retunrs the length of the string (not including the trailing NULL). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-12-13microblaze: lib: Add lib function declarationsMichal Simek1-0/+7
Function declarations fix these sparse warnings: arch/microblaze/lib/ashldi3.c:5:11: warning: symbol '__ashldi3' was not declared. Should it be static? arch/microblaze/lib/muldi3.c:50:8: warning: symbol '__muldi3' was not declared. Should it be static? arch/microblaze/lib/cmpdi2.c:5:11: warning: symbol '__cmpdi2' was not declared. Should it be static? arch/microblaze/lib/lshrdi3.c:5:11: warning: symbol '__lshrdi3' was not declared. Should it be static? arch/microblaze/lib/ashrdi3.c:5:11: warning: symbol '__ashrdi3' was not declared. Should it be static? arch/microblaze/lib/ucmpdi2.c:5:11: warning: symbol '__ucmpdi2' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-12-13microblaze: lib: Remove helper macrosMichal Simek1-16/+12
Remove these gcc types and use standard types. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into nextMichal Simek1-1/+0
2012-03-30microblaze: Fix stack usage in PAGE_SIZE copy_tofrom_userMichal Simek1-36/+62
If access to user space failed we need to reconstruct stack pointer and restore all register. This patch fixed problem introduces by: "microblaze: Add loop unrolling for PAGE in copy_tofrom_user" (sha1: ebe211254bfa6295f4ab0b33c7c881bdfabbab60) Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-03-28Disintegrate asm/system.h for MicroblazeDavid Howells1-1/+0
Disintegrate asm/system.h for Microblaze. Not compiled. Signed-off-by: David Howells <dhowells@redhat.com> cc: microblaze-uclinux@itee.uq.edu.au
2012-01-05microblaze: Add __cmpdi2Michal Simek2-0/+27
Some new kernel configurations require __cmpdi2 function. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Use delay slot in __strnlen_user, __strncpy_userMichal Simek1-2/+2
Use delay slot to speedup if maxlen is zero. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Add __ucmpdi2() helper functionMichal Simek2-0/+21
Add missing __ucmpdi2 helper function. Error log: kernel/built-in.o: In function `print_graph_duration': : undefined reference to `__ucmpdi2' kernel/built-in.o: In function `print_graph_duration': : undefined reference to `__ucmpdi2' Based on MIPS code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Add loop unrolling for PAGE in copy_tofrom_userMichal Simek1-0/+84
Increase performance by loop unrolling. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Simplify logic for unaligned byte copyingMichal Simek1-5/+3
Save jump instruction for unaligned byte copying. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Change label names - copy_tofrom_userMichal Simek1-14/+13
Change label name to be prepared for loop unrolling. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Separate fixup section definitionMichal Simek1-1/+9
Move fixups below appropriate code. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Change label name in copy_tofrom_userMichal Simek1-3/+3
Use label 0: for zero length copying and fixups. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds3-8/+8
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-01microblaze: Fix ftraceMichal Simek1-0/+6
- Do not trace idle loop which takes a lot time - Fix cache handling in generic ftrace code - Do not trace lib functions ashldi3, ashrdi3, lshrdi3 Functions are called from generic ftrace code which can't be traced Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-31Fix common misspellingsLucas De Marchi3-8/+8
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-09microblaze: Add missing export symbols for lib functionsMichal Simek1-0/+1
Adding missing export symbols for loadable modules. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-28microblaze: Fix ASM optimized code for LEMichal Simek1-0/+4
Microblaze little-endian doesn't support ASM optimized library functions(memcpy/memmove). Kconfig doens't contain any information about endian that's why it is necessary to check it in the source code. The code is used with barrel shifter is used. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-03microblaze: Fix __muldi3 function for little-endian.Michal Simek2-121/+60
__muldi3 was written for big endian platforms. Code contained half word read/write instructions which are not compatible with little endian cpu. Asm __muldi3 implementation is replaced by C version. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-11-15arch/microblaze: Remove unnecessary semicolonsJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21microblaze: Support C optimized lib functions for little-endianMichal Simek2-6/+60
Optimized C library functions can rapidly speedup the kernel. memset doesn't need to be optimized because there is no difference in behavior on little/big endian cpu. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21microblaze: Separate library optimized functionsMichal Simek3-15/+46
memcpy/memmove/memset Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21microblaze: Add libgcc function directly to kernelMichal Simek11-0/+607
Replaced libgcc functions with asm optimized implementation. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Support word copying in copy_tofrom_userMichal Simek1-14/+25
Word copying is used only for aligned addresses. Here is space for improving to use any better copying technique. Look at memcpy implementation. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Adding likely macrosMichal Simek2-8/+9
On the base on GCOV analytics is helpful to add likely/unlikely macros. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: Add .type and .size to ASM functionsMichal Simek2-1/+11
Cachegrind analysis need this fix to be able to log asm functions. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: uaccess: Unify __copy_tofrom_userMichal Simek1-1/+1
Move to generic location. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01microblaze: uaccess: Move functions to generic locationMichal Simek2-49/+0
noMMU and MMU use them. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Simple __copy_tofrom_user for noMMUJohn Williams1-0/+7
This is first patch which clear part of uaccess.h. uaccess.h will be clear later. Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa3-3/+3
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-06microblaze: use the generic lib/checksum.cRemis Lima Baima2-173/+1
The microblaze checksum code is mostly identical to the asm-generic+lib version, so use that instead. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26microblaze_mmu_v2: MakefilesMichal Simek1-1/+2
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-26microblaze_mmu_v2: uaccess MMU updateMichal Simek1-0/+135
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21microblaze: clean up checksum.cArnd Bergmann1-11/+20
This changes the function prototypes in the checksum code to have the usual prototypes, typically by turning int arguments into __wsum. Also change csum_partial_copy_from_user() to operate on the right address space and export ip_fast_csum, which is used in modular networking code. The new version is now sparse-clean including endianess checks. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21microblaze: remove cacheable_memcpyArnd Bergmann1-5/+0
This function is neither declared nor used anywhere outside of ppc32, so remove it from microblaze. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27microblaze_v8: Makefiles for Microblaze cpuMichal Simek1-0/+13
Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27microblaze_v8: uaccess filesMichal Simek1-0/+41
Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.