aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/embedded6xx (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-05powerpc/embedded6xx/ls_uart: Add missing of_node_put()Liang He1-0/+2
In ls_uarts_init(), add an of_node_put() to keep refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620065904.4071787-1-windhl@126.com
2022-09-05powerpc/embedded6xx: Add missing of_node_put()sLiang He2-0/+9
Add missing of_node_put()s in various paths. Signed-off-by: Liang He <windhl@126.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220618041042.4058066-1-windhl@126.com
2022-09-01powerpc/32: Remove wii_memory_fixups()Christophe Leroy1-15/+0
wii_memory_fixups() is not called anymore, remove it. Also remove left-overs in mmu_decl.h which were forgotten by commit 160985f3025b ("powerpc/wii: remove wii_mmu_mapin_mem2()") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5f2091f86528b59ef92ef1daed5d3dd8c0d7bebd.1661938317.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Add missing headersChristophe Leroy6-6/+8
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy3-3/+0
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2021-12-23powerpc/embedded6xx: Add __init attribute to eligible functionsNick Child5-7/+7
Some functions defined in 'arch/powerpc/platforms/embedded6xx' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-17-nick.child@ibm.com
2021-12-02powerpc: Rename PPC_NATIVE to PPC_HASH_MMU_NATIVENicholas Piggin1-1/+1
PPC_NATIVE now only controls the native HPT code, so rename it to be more descriptive. Restrict it to Book3S only. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211201144153.2456614-3-npiggin@gmail.com
2021-11-25powerpc/6xx: add missing of_node_putJulia Lawall1-0/+1
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e; local idexpression n; @@ @@ local idexpression n; expression e; @@ for_each_compatible_node(n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1448051604-25256-2-git-send-email-Julia.Lawall@lip6.fr
2021-08-26powerpc: Refactor verification of MSR_RIChristophe Leroy2-2/+2
40x and BOOKE don't have MSR_RI therefore all tests involving MSR_RI may be problematic on those plateforms. Create helpers to check or set MSR_RI in regs, and use them in common code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c2fb93708196734f4176dda334aaa3055f213b89.1629707037.git.christophe.leroy@csgroup.eu
2021-08-10powerpc: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-8/+7
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210802162630.2219813-13-maz@kernel.org
2021-07-02Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds2-4/+4
Pull powerpc updates from Michael Ellerman: - A big series refactoring parts of our KVM code, and converting some to C. - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs. - Support for the Microwatt soft-core. - Optimisations to our interrupt return path on 64-bit. - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10. - Enable KUAP and KUEP by default on 32-bit Book3S CPUs. - Other smaller features, fixes & cleanups. Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei. * tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits) powerpc: Only build restart_table.c for 64s powerpc/64s: move ret_from_fork etc above __end_soft_masked powerpc/64s/interrupt: clean up interrupt return labels powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols powerpc/64: enable MSR[EE] in irq replay pt_regs powerpc/64s/interrupt: preserve regs->softe for NMI interrupts powerpc/64s: add a table of implicit soft-masked addresses powerpc/64e: remove implicit soft-masking and interrupt exit restart logic powerpc/64e: fix CONFIG_RELOCATABLE build warnings powerpc/64s: fix hash page fault interrupt handler powerpc/4xx: Fix setup_kuep() on SMP powerpc/32s: Fix setup_{kuap/kuep}() on SMP powerpc/interrupt: Use names in check_return_regs_valid() powerpc/interrupt: Also use exit_must_hard_disable() on PPC32 powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE powerpc/ptrace: Refactor regs_set_return_{msr/ip} powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip} powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi() powerpc/pseries/vas: Include irqdomain.h powerpc: mark local variables around longjmp as volatile ...
2021-06-25powerpc/64s: avoid reloading (H)SRR registers if they are still validNicholas Piggin2-4/+4
When an interrupt is taken, the SRR registers are set to return to where it left off. Unless they are modified in the meantime, or the return address or MSR are modified, there is no need to reload these registers when returning from interrupt. Introduce per-CPU flags that track the validity of SRR and HSRR registers. These are cleared when returning from interrupt, when using the registers for something else (e.g., OPAL calls), when adjusting the return address or MSR of a context, and when context switching (which changes the return address and MSR). This improves the performance of interrupt returns. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Fold in fixup patch from Nick] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com
2021-06-10powerpc: Add missing linux/{of.h,irqdomain.h} include directivesMarc Zyngier1-0/+1
A bunch of PPC files are missing the inclusion of linux/of.h and linux/irqdomain.h, relying on transitive inclusion from another file. As we are about to break this dependency, make sure these dependencies are explicit. Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-29powerpc/embedded6xx: Remove CONFIG_MV64X60Christophe Leroy1-5/+0
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") moved the last selector of CONFIG_MV64X60. As it is not a user selectable config, it can be removed. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/19e57d16692dcd1ca67ba880d7273a57fab416aa.1616085654.git.christophe.leroy@csgroup.eu
2021-02-09powerpc/embedded6xx/mve5100: Move PHB discoveryOliver O'Halloran2-7/+14
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-16-oohall@gmail.com
2021-02-09powerpc/embedded6xx/mpc7448: Move PHB discoveryOliver O'Halloran1-5/+9
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-15-oohall@gmail.com
2021-02-09powerpc/embedded6xx/linkstation: Move PHB discoveryOliver O'Halloran1-3/+7
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-14-oohall@gmail.com
2021-02-09powerpc/embedded6xx/holly: Move PHB discoveryOliver O'Halloran1-3/+7
Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201103043523.916109-13-oohall@gmail.com
2020-09-02powerpc: Drop _nmask_and_or_msr()Christophe Leroy2-2/+4
_nmask_and_or_msr() is only used at two places to set MSR_IP. The SYNC is unnecessary as the users are not PowerPC 601. Can be easily writen in C. Do it, and drop _nmask_and_or_msr() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c2d2b8dfb8dd677026b26dffc8d31070c38a6b89.1597388079.git.christophe.leroy@csgroup.eu
2020-05-20powerpc/wii: Fix declaration made after definitionNathan Chancellor1-13/+12
A 0day randconfig uncovered an error with clang, trimmed for brevity: arch/powerpc/platforms/embedded6xx/wii.c:195:7: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] if (!machine_is(wii)) ^ The macro machine_is declares mach_##name but define_machine actually defines mach_##name, hence the warning. To fix this, move define_machine after the is_machine usage. Fixes: 5a7ee3198dfa ("powerpc: wii: platform support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://github.com/ClangBuiltLinux/linux/issues/989 Link: https://lore.kernel.org/r/20200413190644.16757-1-natechancellor@gmail.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner10-59/+10
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20powerpc/embedded6xx: Remove unused functions holly_power_off and holly_haltMathieu Malaterre1-12/+0
Silence the following warnings triggered using W=1: arch/powerpc/platforms/embedded6xx/holly.c:236:6: error: no previous prototype for 'holly_power_off' arch/powerpc/platforms/embedded6xx/holly.c:243:6: error: no previous prototype for 'holly_halt' Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-20powerpc/embedded6xx: Make some functions staticMathieu Malaterre1-3/+4
In commit cb9e4d10c448 ("[POWERPC] Add support for 750CL Holly board") new functions were added. Since most of these functions can be made static, make it so. Both holly_power_off and holly_halt functions were not changed since they are unused, making them static would have triggered the following warning (treated as error): arch/powerpc/platforms/embedded6xx/holly.c:244:13: error: 'holly_halt' defined but not used Silence the following warnings triggered using W=1: arch/powerpc/platforms/embedded6xx/holly.c:47:5: error: no previous prototype for 'holly_exclude_device' arch/powerpc/platforms/embedded6xx/holly.c:190:6: error: no previous prototype for 'holly_show_cpuinfo' arch/powerpc/platforms/embedded6xx/holly.c:196:17: error: no previous prototype for 'holly_restart' Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/wii: remove wii_mmu_mapin_mem2()Christophe Leroy1-28/+0
wii_mmu_mapin_mem2() is not used anymore, remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc/wii: properly disable use of BATs when requested.Christophe Leroy1-0/+4
'nobats' kernel parameter or some options like CONFIG_DEBUG_PAGEALLOC deny the use of BATS for mapping memory. This patch makes sure that the specific wii RAM mapping function takes it into account as well. Fixes: de32400dd26e ("wii: use both mem1 and mem2 as ram") Cc: stable@vger.kernel.org Reviewed-by: Jonathan Neuschafer <j.neuschaefer@gmx.net> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-29Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds1-2/+2
Pull Kconfig file consolidation from Masahiro Yamada: "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by Christoph Hellwig. Currently, every architecture that wants to provide common peripheral busses needs to add some boilerplate code and include the right Kconfig files. This series instead just selects the presence (when needed) and then handles everything in the bus-specific Kconfig file under drivers/" * tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: pcmcia: remove per-arch PCMCIA config entry eisa: consolidate EISA Kconfig entry in drivers/eisa rapidio: consolidate RAPIDIO config entry in drivers/rapidio pcmcia: allow PCMCIA support independent of the architecture PCI: consolidate the PCI_SYSCALL symbol PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options PCI: consolidate PCI config entry in drivers/pci MIPS: remove the HT_PCI config option
2018-11-26powerpc/kconfig: remove CONFIG_6xxChristophe Leroy1-1/+1
CONFIG_6xx is not used anymore. Remove it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig1-2/+2
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-03powerpc: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02powerpc: wii: Remove outdated comment about memory fixupsJonathan Neuschäfer1-10/+0
The workaround has been removed. What stays is just code to find the memory hole so the BATs can be configured properly in the function below. Fixes: 57deb8fea01f ("powerpc/wii: Don't rely on the reserved memory hack") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-04powerpc/embedded6xx: Remove C2K board supportMark Greer3-159/+0
The C2K platform appears to be orphaned so remove code supporting it. CC: Remi Machet <rmachet@nvidia.com> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Acked-by: Remi Machet <remi@machet.us> Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/wii: Make hlwd_pic_init function staticMathieu Malaterre1-1/+1
The function hlwd_pic_init can be made static, so do it. Fix the following warning treated as error (W=1): ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:158:20: error: no previous prototype for ‘hlwd_pic_init’ [-Werror=missing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-15powerpc/embedded6xx/hlwd-pic: Prevent interrupts from being handled by StarletJonathan Neuschäfer1-0/+5
The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/mini Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-15powerpc/embedded6xx/flipper-pic: Don't match all IRQ domainsJonathan Neuschäfer1-8/+0
On the Wii, there is a secondary IRQ controller (hlwd-pic), so flipper-pic's match operation should not be hardcoded to return 1. In fact, the default matching logic is sufficient, and we can completely omit flipper_pic_match. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/wii: Don't rely on the reserved memory hackJonathan Neuschäfer1-13/+1
Because the two memory blocks (usually called MEM1 and MEM2) are not merged anymore, __request_region in kernel/resource.c will correctly allow reserving regions in the physical address space between MEM1 and MEM2, where many important peripherals are (GPIO, MMC, USB, ...). A previous change to __ioremap_caller in arch/powerpc/mm/pgtable_32.c ensures that multiple memblocks are properly considered in ioremap; this makes it unnecessary to set __allow_ioremap_reserved. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/wii: Explicitly configure GPIO owner for poweroff pinJonathan Neuschäfer1-0/+7
The Hollywood chipset's GPIO controller has two sets of registers: One for access by the PowerPC CPU, and one for access by the ARM coprocessor (but both are accessible from the PPC because the memory firewall (AHBPROT) is usually disabled when booting Linux, today). The wii_power_off function currently assumes that the poweroff GPIO pin is configured for use via the ARM side, but the upcoming GPIO driver configures all pins for use via the PPC side, breaking poweroff. Configure the owner register explicitly in wii_power_off to make wii_power_off work with and without the new GPIO driver. I think the Wii can be switched to the generic gpio-poweroff driver, after the GPIO driver is merged. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-01powerpc/wii: Probe the whole devicetreeJonathan Neuschäfer1-1/+1
Previously, wii_device_probe would only initialize devices under the /hollywood node. After this patch, platform devices placed outside of /hollywood will also be initialized. The intended usecase for this are devices located outside of the Hollywood chip, such as GPIO LEDs and GPIO buttons. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13powerpc/embedded6xx: Make functions flipper_pic_init() & ug_udbg_putc() staticMathieu Malaterre2-2/+2
Change signature of two functions, adding static keyword to prevent the following two warnings (treated as errors on W=1): arch/powerpc/platforms/embedded6xx/flipper-pic.c:135:28: error: no previous prototype for ‘flipper_pic_init’ arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c:172:6: error: no previous prototype for ‘ug_udbg_putc’ Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-23powerpc: Convert to using %pOF instead of full_nameRob Herring3-5/+5
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Anatolij Gustschin <agust@denx.de> Cc: Scott Wood <oss@buserror.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-14powerpc: Add support for relative exception tablesNicholas Piggin2-2/+2
This halves the exception table size on 64-bit builds, and it allows build-time sorting of exception tables to work on relocated kernels. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Minor asm fixups and bits to keep the selftests working] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-20powerpc: Remove all usages of NO_IRQMichael Ellerman3-5/+5
NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-22powerpc: migrate exception table users off module.h and onto extable.hPaul Gortmaker2-2/+2
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2016-07-21powerpc: Get rid of ppc_md.init_early()Benjamin Herrenschmidt3-13/+7
It is now called right after platform probe, so the probe function can just do the job. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-21powerpc: Move 32-bit probe() machine to later in the boot processBenjamin Herrenschmidt8-28/+8
This converts all the 32-bit platforms to use the expanded device-tree which is a pretty mechanical change. Unlike 64-bit, the 32-bit kernel didn't rely on platform initializations to setup the MMU since it sets it up entirely before probe_machine() so the move has comparatively less consequences though it's a bigger patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14powerpc: Make ppc_md.{halt, restart} __noreturnDaniel Axtens8-14/+14
powernv marks it's halt and restart calls as __noreturn. However, ppc_md does not have this annotation. Add the annotation to ppc_md, and then to every halt/restart function that is missing it. Additionally, I have verified that all of these functions do not return. Occasionally I have added a spin loop to be sure. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-11powerpc32: remove ioremap_baseChristophe Leroy1-10/+0
ioremap_base is not initialised and is nowhere used so remove it Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner2-3/+2
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-07-30genirq/irqdomain: Allow irq domain aliasingMarc Zyngier1-1/+2
It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.