aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-26powerpc: Change CONFIG_E500 to CONFIG_PPC_E500Christophe Leroy2-2/+2
It will be used outside arch/powerpc, make it clear its a powerpc configuration item. And we already have CONFIG_PPC_E500MC, so that will make it more consistent. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e63b22083c11c4300f4a82d3123a46e5fdd54fa6.1663606876.git.christophe.leroy@csgroup.eu
2022-09-14Revert "powerpc/rtas: Implement reentrant rtas call"Nathan Lynch1-11/+11
At the time this was submitted by Leonardo, I confirmed -- or thought I had confirmed -- with PowerVM partition firmware development that the following RTAS functions: - ibm,get-xive - ibm,int-off - ibm,int-on - ibm,set-xive were safe to call on multiple CPUs simultaneously, not only with respect to themselves as indicated by PAPR, but with arbitrary other RTAS calls: https://lore.kernel.org/linuxppc-dev/875zcy2v8o.fsf@linux.ibm.com/ Recent discussion with firmware development makes it clear that this is not true, and that the code in commit b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call") is unsafe, likely explaining several strange bugs we've seen in internal testing involving DLPAR and LPM. These scenarios use ibm,configure-connector, whose internal state can be corrupted by the concurrent use of the "reentrant" functions, leading to symptoms like endless busy statuses from RTAS. Fixes: b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220907220111.223267-1-nathanl@linux.ibm.com
2022-09-06powerpc/xive: fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'set'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220831004706.35280-1-yuanjilin@cdjrlc.com
2022-09-05powerpc/fsl_pci: Remove of_node_put() when reference escaped outLiang He1-1/+0
In fsl_pci_assign_primary(), we should remove the of_node_put() when breaking out of the for_each_matching_node() as the 'np' is escaped out by global 'fsl_pci_primary'. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220720124557.1256243-1-windhl@126.com
2022-09-05powerpc/sysdev/fsl_msi: Add missing of_node_put()Liang He1-0/+2
In fsl_setup_msi_irqs(), use of_node_put() to drop the reference returned by of_parse_phandle(). Fixes: 895d603f945ba ("powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220704145233.278539-1-windhl@126.com
2022-09-05powerpc/sysdev: Add missing of_node_put()sLiang He3-7/+23
Add of_node_put() in various paths to drop references once they are no longer needed. Signed-off-by: Liang He <windhl@126.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620130221.4073228-1-windhl@126.com
2022-08-01powerpc/xive: Fix refcount leak in xive_get_max_prioMiaoqian Lin1-0/+1
of_find_node_by_path() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.com
2022-07-28powerpc/sysdev: Fix comment typoJason Wang1-1/+1
The double `is' is duplicated in line 110, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220715035250.5978-1-wangborong@cdjrlc.com
2022-07-28powerpc: Remove asm/prom.h from asm/mpc52xx.h and asm/pci.hChristophe Leroy1-0/+2
asm/pci.h and asm/mpc52xx.h don't need asm/prom.h Declare struct device_node locally to avoid including of.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Add missing include of prom.h to of_rtc.c] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/cf5243343e2364c2b40f22ee5ad9a6e2453d1121.1657264228.git.christophe.leroy@csgroup.eu
2022-07-27powerpc/44x: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')Christophe Leroy1-2/+10
Building ppc40x_defconfig leads to following error CC arch/powerpc/kernel/idle.o {standard input}: Assembler messages: {standard input}:67: Error: unrecognized opcode: `wrteei' {standard input}:78: Error: unrecognized opcode: `wrteei' Add -mcpu=440 by default and alternatively 464 and 476. Once that's done, -mcpu=powerpc is only for book3s/32 now. But then comes CC arch/powerpc/kernel/io.o {standard input}: Assembler messages: {standard input}:198: Error: unrecognized opcode: `eieio' {standard input}:230: Error: unrecognized opcode: `eieio' {standard input}:245: Error: unrecognized opcode: `eieio' {standard input}:254: Error: unrecognized opcode: `eieio' {standard input}:273: Error: unrecognized opcode: `eieio' {standard input}:396: Error: unrecognized opcode: `eieio' {standard input}:404: Error: unrecognized opcode: `eieio' {standard input}:423: Error: unrecognized opcode: `eieio' {standard input}:512: Error: unrecognized opcode: `eieio' {standard input}:520: Error: unrecognized opcode: `eieio' {standard input}:539: Error: unrecognized opcode: `eieio' {standard input}:628: Error: unrecognized opcode: `eieio' {standard input}:636: Error: unrecognized opcode: `eieio' {standard input}:655: Error: unrecognized opcode: `eieio' Fix it by replacing eieio by mbar on booke. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b0d982e223314ed82ab959f5d4ad2c4c00bedb99.1657549153.git.christophe.leroy@csgroup.eu
2022-07-27powerpc/fsl-pci: Fix Class Code of PCIe Root PortPali Rohár2-0/+9
By default old pre-3.0 Freescale PCIe controllers reports invalid PCI Class Code 0x0b20 for PCIe Root Port. It can be seen by lspci -b output on P2020 board which has this pre-3.0 controller: $ lspci -bvnn 00:00.0 Power PC [0b20]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) !!! Invalid class 0b20 for header type 01 Capabilities: [4c] Express Root Port (Slot-), MSI 00 Fix this issue by programming correct PCI Class Code 0x0604 for PCIe Root Port to the Freescale specific PCIe register 0x474. With this change lspci -b output is: $ lspci -bvnn 00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc P2020E [1957:0070] (rev 21) (prog-if 00 [Normal decode]) Capabilities: [4c] Express Root Port (Slot-), MSI 00 Without any "Invalid class" error. So class code was properly reflected into standard (read-only) PCI register 0x08. Same fix is already implemented in U-Boot pcie_fsl.c driver in commit: http://source.denx.de/u-boot/u-boot/-/commit/d18d06ac35229345a0af80977a408cfbe1d1015b Fix activated by U-Boot stay active also after booting Linux kernel. But boards which use older U-Boot version without that fix are affected and still require this fix. So implement this class code fix also in kernel fsl_pci.c driver. Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220706101043.4867-1-pali@kernel.org
2022-07-09Merge branch 'fixes' into nextMichael Ellerman1-2/+3
Merge our fixes branch. In particular this brings in commit 986481618023 ("powerpc/book3e: Fix PUD allocation size in map_kernel_page()") which fixes a build failure in next, because commit 2db2008e6363 ("powerpc/64e: Rewrite p4d_populate() as a static inline function") depends on it.
2022-06-24powerpc/xive/spapr: correct bitmap allocation sizeNathan Lynch1-2/+3
kasan detects access beyond the end of the xibm->bitmap allocation: BUG: KASAN: slab-out-of-bounds in _find_first_zero_bit+0x40/0x140 Read of size 8 at addr c00000001d1d0118 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00001-g90df023b36dd #28 Call Trace: [c00000001d98f770] [c0000000012baab8] dump_stack_lvl+0xac/0x108 (unreliable) [c00000001d98f7b0] [c00000000068faac] print_report+0x37c/0x710 [c00000001d98f880] [c0000000006902c0] kasan_report+0x110/0x354 [c00000001d98f950] [c000000000692324] __asan_load8+0xa4/0xe0 [c00000001d98f970] [c0000000011c6ed0] _find_first_zero_bit+0x40/0x140 [c00000001d98f9b0] [c0000000000dbfbc] xive_spapr_get_ipi+0xcc/0x260 [c00000001d98fa70] [c0000000000d6d28] xive_setup_cpu_ipi+0x1e8/0x450 [c00000001d98fb30] [c000000004032a20] pSeries_smp_probe+0x5c/0x118 [c00000001d98fb60] [c000000004018b44] smp_prepare_cpus+0x944/0x9ac [c00000001d98fc90] [c000000004009f9c] kernel_init_freeable+0x2d4/0x640 [c00000001d98fd90] [c0000000000131e8] kernel_init+0x28/0x1d0 [c00000001d98fe10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64 Allocated by task 0: kasan_save_stack+0x34/0x70 __kasan_kmalloc+0xb4/0xf0 __kmalloc+0x268/0x540 xive_spapr_init+0x4d0/0x77c pseries_init_irq+0x40/0x27c init_IRQ+0x44/0x84 start_kernel+0x2a4/0x538 start_here_common+0x1c/0x20 The buggy address belongs to the object at c00000001d1d0118 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes inside of 8-byte region [c00000001d1d0118, c00000001d1d0120) The buggy address belongs to the physical page: page:c00c000000074740 refcount:1 mapcount:0 mapping:0000000000000000 index:0xc00000001d1d0558 pfn:0x1d1d flags: 0x7ffff000000200(slab|node=0|zone=0|lastcpupid=0x7ffff) raw: 007ffff000000200 c00000001d0003c8 c00000001d0003c8 c00000001d010480 raw: c00000001d1d0558 0000000001e1000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: c00000001d1d0000: fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0080: fc fc 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >c00000001d1d0100: fc fc fc 02 fc fc fc fc fc fc fc fc fc fc fc fc ^ c00000001d1d0180: fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc fc c00000001d1d0200: fc fc fc fc fc 04 fc fc fc fc fc fc fc fc fc fc This happens because the allocation uses the wrong unit (bits) when it should pass (BITS_TO_LONGS(count) * sizeof(long)) or equivalent. With small numbers of bits, the allocated object can be smaller than sizeof(long), which results in invalid accesses. Use bitmap_zalloc() to allocate and initialize the irq bitmap, paired with bitmap_free() for consistency. Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220623182509.3985625-1-nathanl@linux.ibm.com
2022-06-22powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnodeAndy Shevchenko1-19/+22
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help cleaning up other parts of the kernel from OF specific code. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com
2022-06-20powerpc: Don't include asm/setup.h in asm/machdep.hChristophe Leroy1-0/+1
asm/machdep.h doesn't need asm/setup.h Remove it. Add it directly in files that needs it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3b1dfb19a2c3265fb4abc2bfc7b6eae9261a998b.1654966508.git.christophe.leroy@csgroup.eu
2022-05-24powerpc/xics: Include missing headerChristophe Leroy1-0/+1
Include of_adresses.h to get of_iomap() prototype. Fixes: 86c38fec69a4 ("powerpc: Remove asm/prom.h from all files that don't need it") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f20a14be1a29fa0a9ebcfc5ebf05eb69c5120d10.1653370502.git.christophe.leroy@csgroup.eu
2022-05-22powerpc/iommu: Add missing of_node_put in iommu_init_early_dartPeng Wu1-2/+4
The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak. Signed-off-by: Peng Wu <wupeng58@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220425081245.21705-1-wupeng58@huawei.com
2022-05-22powerpc/fsl_rio: Fix refcount leak in fsl_rio_setupMiaoqian Lin1-0/+2
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com
2022-05-22powerpc/xive: Fix refcount leak in xive_spapr_initMiaoqian Lin1-2/+5
of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512090535.33397-1-linmq006@gmail.com
2022-05-22powerpc/85xx: Remove FSL_85XX_CACHE_SRAMChristophe Leroy4-452/+0
CONFIG_FSL_85XX_CACHE_SRAM is an option that is not user selectable and which is not selected by any driver nor any defconfig. Remove it and all associated code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9949813a6b758903b7bee910f798ba2ca82ff8ee.1648720908.git.christophe.leroy@csgroup.eu
2022-05-22powerpc/xics: fix refcount leak in icp_opal_init()Lv Ruyi1-0/+1
The of_find_compatible_node() function returns a node pointer with refcount incremented, use of_node_put() on it when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn
2022-05-22powerpc/kasan: Disable address sanitization in kexec pathsDaniel Axtens2-4/+4
The kexec code paths involve code that necessarily run in real mode, as CPUs are disabled and control is transferred to the new kernel. Disable address sanitization for the kexec code and the functions called in real mode on CPUs being disabled. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
2022-05-08powerpc: Add missing headersChristophe Leroy25-22/+40
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h, asm/pci.h etc... Include the needed headers, and remove asm/prom.h when it was needed exclusively for pulling necessary headers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
2022-05-08powerpc: Remove asm/prom.h from all files that don't need itChristophe Leroy5-5/+0
Several files include asm/prom.h for no reason. Clean it up. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Drop change to prom_parse.c as reported by lkp@intel.com] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
2022-05-05powerpc: fix typos in commentsJulia Lawall8-8/+8
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
2022-03-25Merge tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+1
Pull pci updates from Bjorn Helgaas: "Enumeration: - Move the VGA arbiter from drivers/gpu to drivers/pci because it's PCI-specific, not GPU-specific (Bjorn Helgaas) - Select the default VGA device consistently whether it's enumerated before or after VGA arbiter init, which fixes arches that enumerate PCI devices late (Huacai Chen) Resource management: - Support BAR sizes up to 8TB (Dongdong Liu) PCIe native device hotplug: - Fix "Command Completed" tracking to avoid spurious timouts when powering off empty slots (Liguang Zhang) - Quirk Qualcomm devices that don't implement Command Completed correctly, again to avoid spurious timeouts (Manivannan Sadhasivam) Peer-to-peer DMA: - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist (Michael J. Ruhl) APM X-Gene PCIe controller driver: - Revert generic DT parsing changes that broke some machines in the field (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Allow controller probe to succeed even when no devices currently present to allow hot-add later (Fabio Estevam) - Enable power management on i.MX6QP (Richard Zhu) - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no device is connected (Richard Zhu) Marvell Aardvark PCIe controller driver: - Fix MSI and MSI-X support (Marek Behún, Pali Rohár) - Add support for ERR and PME interrupts (Pali Rohár) Marvell MVEBU PCIe controller driver: - Add DT binding and support for "num-lanes" (Pali Rohár) - Add support for INTx interrupts (Pali Rohár) Microsoft Hyper-V host bridge driver: - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun Feng) Qualcomm PCIe controller driver: - Add SM8450 DT binding and driver support (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Help the controller get to the L1 state since the hardware can't do it on its own (Marek Vasut) - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek Vasut) SiFive FU740 PCIe controller driver: - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks) - Force 2.5GT/s for initial device probe (Ben Dooks) Socionext UniPhier Pro5 controller driver: - Add NX1 DT binding and driver support (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Restore MSI configuration so MSI works after resume (Jisheng Zhang)" * tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI: Avoid broken MSI on SB600 USB devices PCI: fu740: Force 2.5GT/s for initial device probe PCI: xgene: Revert "PCI: xgene: Fix IB window setup" PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup" PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present PCI: imx6: Invoke the PHY exit function after PHY power off PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access() PCI: dwc: Restore MSI Receiver mask during resume PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup PCI/VGA: Replace full MIT license text with SPDX identifier PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Log bridge control messages when adding devices ...
2022-03-16powerpc/xive: fix return value of __setup handlerRandy Dunlap1-3/+3
__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from xive_off() and xive_store_eoi_cmdline(). Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Fixes: c21ee04f11ae ("powerpc/xive: Add a kernel parameter for StoreEOI") [lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru] Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>: Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220313065936.4363-1-rdunlap@infradead.org
2022-03-08powerpc/sysdev: fix incorrect use to determine if list is emptyJakob Koschel1-2/+2
'gtm' will *always* be set by list_for_each_entry(). It is incorrect to assume that the iterator value will be NULL if the list is empty. Instead of checking the pointer it should be checked if the list is empty. Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support") Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220228142434.576226-1-jakobkoschel@gmail.com
2022-02-17PCI: Add defines for normal and subtractive PCI bridgesPali Rohár1-1/+1
Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-02-07powerpc/corenet: Change criteria to set MPIC_ENABLE_COREINTChristophe Leroy1-3/+1
Don't use ppc_md function comparison. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c8ef82ee5f2713f4c36eb5d2d49b0905c7472801.1630667612.git.christophe.leroy@csgroup.eu
2022-02-03powerpc/xive: Add some error handling code to 'xive_spapr_init()'Christophe JAILLET1-8/+28
'xive_irq_bitmap_add()' can return -ENOMEM. In this case, we should free the memory already allocated and return 'false' to the caller. Also add an error path which undoes the 'tima = ioremap(...)' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/564998101804886b151235c8a9f93020923bfd2c.1643718324.git.christophe.jaillet@wanadoo.fr
2022-01-31powerpc/xive: Export XIVE IPI information for online-only processors.Sachin Sant1-1/+1
Cédric pointed out that XIVE IPI information exported via sysfs (debug/powerpc/xive) display empty lines for processors which are not online. Switch to using for_each_online_cpu() so that information is displayed for online-only processors. Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/164146703333.19039.10920919226094771665.sendpatchset@MacBook-Pro.local
2022-01-14Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds22-125/+219
Pull powerpc updates from Michael Ellerman: - Optimise radix KVM guest entry/exit by 2x on Power9/Power10. - Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10 or later CPUs. - Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits. - Several fixes and improvements to our hard lockup watchdog. - Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit. - Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only. - Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit). - Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10. - A series of small performance improvements to 64-bit interrupt entry. - Several commits fixing issues when building with the clang integrated assembler. - Many other small features and fixes. Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang Guang. * tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits) powerpc/xmon: Dump XIVE information for online-only processors. powerpc/opal: use default_groups in kobj_type powerpc/cacheinfo: use default_groups in kobj_type powerpc/sched: Remove unused TASK_SIZE_OF powerpc/xive: Add missing null check after calling kmalloc powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API selftests/powerpc: Add a test of sigreturning to an unaligned address powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings powerpc/64s: Mask NIP before checking against SRR0 powerpc/perf: Fix spelling of "its" powerpc/32: Fix boot failure with GCC latent entropy plugin powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests powerpc/code-patching: Move code patching selftests in its own file powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h powerpc/code-patching: Move patch_exception() outside code-patching.c powerpc/code-patching: Use test_trampoline for prefixed patch test powerpc/code-patching: Fix patch_branch() return on out-of-range failure powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling powerpc/code-patching: Fix unmap_patch_area() error handling powerpc/code-patching: Fix error handling in do_patch_instruction() ...
2022-01-04powerpc/xive: Add missing null check after calling kmallocAmmar Faizi1-0/+3
Commit 930914b7d528fc ("powerpc/xive: Add a debugfs file to dump internal XIVE state") forgot to add a null check. Add it. Fixes: 930914b7d528fc6b0249bffc00564100bcf6ef75 ("powerpc/xive: Add a debugfs file to dump internal XIVE state") Signed-off-by: Ammar Faizi <ammarfaizi2@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211226135314.251221-1-ammar.faizi@intel.com
2021-12-23powerpc/pasemi: Add __init attribute to eligible functionsNick Child1-1/+1
Some functions defined in 'arch/powerpc/platforms/pasemi' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-10-nick.child@ibm.com
2021-12-23powerpc/sysdev: Add __init attribute to eligible functionsNick Child19-32/+32
Some files functions in 'arch/powerpc/sysdev' are deserving of an `__init` macro attribute. These functions are only called by other initialization functions and therefore should inherit the attribute. Also, change function declarations in header files to include `__init`. Signed-off-by: Nick Child <nick.child@ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211216220035.605465-6-nick.child@ibm.com
2021-12-20powerpc/mpic: Use bitmap_zalloc() when applicableChristophe JAILLET1-2/+1
'mpic->protected' is a bitmap. So use 'bitmap_zalloc()' to simplify code and improve the semantic, instead of hand writing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/aa145f674e08044c98f13f1a985faa9cc29c3708.1639777976.git.christophe.jaillet@wanadoo.fr
2021-12-16powerpc/mpic_u3msi: Use msi_for_each-desc()Thomas Gleixner1-7/+2
Replace the about to vanish iterators and make use of the filtering. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211206210748.576162169@linutronix.de
2021-12-16powerpc/fsl_msi: Use msi_for_each_desc()Thomas Gleixner1-6/+2
Replace the about to vanish iterators and make use of the filtering. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211206210748.522641685@linutronix.de
2021-12-09powerpc/4xx: Remove MSI support which never workedThomas Gleixner1-6/+0
This code is broken since day one. ppc4xx_setup_msi_irqs() has the following gems: 1) The handling of the result of msi_bitmap_alloc_hwirqs() is completely broken: When the result is greater than or equal 0 (bitmap allocation successful) then the loop terminates and the function returns 0 (success) despite not having installed an interrupt. When the result is less than 0 (bitmap allocation fails), it prints an error message and continues to "work" with that error code which would eventually end up in the MSI message data. 2) On every invocation the file global pp4xx_msi::msi_virqs bitmap is allocated thereby leaking the previous one. IOW, this has never worked and for more than 10 years nobody cared. Remove the gunk. Fixes: 3fb7933850fa ("powerpc/4xx: Adding PCIe MSI support") Fixes: 247540b03bfc ("powerpc/44x: Fix PCI MSI support for Maui APM821xx SoC and Bluestone board") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211206210223.872249537@linutronix.de
2021-12-02powerpc/xive: Fix compile when !CONFIG_PPC_POWERNV.Cédric Le Goater3-1/+15
The automatic "save & restore" of interrupt context is a POWER10/XIVE2 feature exploited by KVM under the PowerNV platform. It is not available under pSeries and the associated toggle should not be exposed under the XIVE debugfs directory. Introduce a platform handler for debugfs initialization and move the 'save-restore' entry under the native (PowerNV) backend to fix compile when !CONFIG_PPC_POWERNV. Fixes: 1e7684dc4fc7 ("powerpc/xive: Add a debugfs toggle for save-restore") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211201165418.1041842-1-clg@kaod.org
2021-11-25powerpc/tsi108: make EXPORT_SYMBOL follow its function immediatelyJason Wang1-2/+1
EXPORT_SYMBOL(foo); should immediately follow its function/variable. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211114115616.493815-1-wangborong@cdjrlc.com
2021-11-25powerpc/xive: Add a debugfs toggle for save-restoreCédric Le Goater3-1/+3
On POWER10, the automatic "save & restore" of interrupt context is always available. Provide a way to deactivate it for tests or performance. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-11-clg@kaod.org
2021-11-25powerpc/xive: Add a kernel parameter for StoreEOICédric Le Goater1-0/+13
StoreEOI is activated by default on platforms supporting the feature (POWER10) and will be used as soon as firmware advertises its availability. The kernel parameter provides a way to deactivate its use. It can be still be reactivated through debugfs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-10-clg@kaod.org
2021-11-25powerpc/xive: Add a debugfs toggle for StoreEOICédric Le Goater1-3/+14
It can be used to deactivate temporarily StoreEOI for tests or performance on platforms supporting the feature (POWER10) Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-9-clg@kaod.org
2021-11-25powerpc/xive: Add a debugfs file to dump EQsCédric Le Goater1-0/+37
The XIVE driver under Linux uses a single interrupt priority and only one event queue is configured per CPU. Expose the contents under a 'xive/eqs/cpuX' debugfs file. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-8-clg@kaod.org
2021-11-25powerpc/xive: Rename the 'cpus' debugfs file to 'ipis'Cédric Le Goater1-20/+7
and remove the EQ entries output which is not very useful since only the next two events of the queue are taken into account. We will improve the dump of the EQ in the next patches. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-7-clg@kaod.org
2021-11-25powerpc/xive: Change the debugfs file 'xive' into a directoryCédric Le Goater1-11/+25
Use a 'cpus' file to dump CPU states and 'interrupts' to dump IRQ states. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-6-clg@kaod.org
2021-11-25powerpc/xive: Introduce xive_core_debugfs_create()Cédric Le Goater1-3/+15
and fix some compile issues when !CONFIG_DEBUG_FS. Signed-off-by: Cédric Le Goater <clg@kaod.org> [mpe: Add empty stub to fix !CONFIG_DEBUG_FS build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-5-clg@kaod.org
2021-11-25powerpc/xive: Activate StoreEOI on P10Cédric Le Goater1-0/+2
StoreEOI (the capability to EOI with a store) requires load-after-store ordering in some cases to be reliable. P10 introduced a new offset for load operations to enforce correct ordering and the XIVE driver has the required support since kernel 5.8, commit b1f9be9392f0 ("powerpc/xive: Enforce load-after-store ordering when StoreEOI is active") Since skiboot v7, StoreEOI support is advertised on P10 with a new flag on the PowerNV platform. See skiboot commit 4bd7d84afe46 ("xive/p10: Introduce a new OPAL_XIVE_IRQ_STORE_EOI2 flag"). When detected, activate the feature. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211105102636.1016378-4-clg@kaod.org
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.